GoPower! 2019 Tech Pages

ADJUSTABLE SOLAR
MOUNT

OPTIMIZE SOLAR CHARGING

ARM-UNI Maxmize Your Panel Angle!

The ARM-UNI is compatible with the OVERLANDER, The Adjustable ARM Universal Mount (ARM-UNI) optimizes
OVERLANDER E, RETREAT AND RETREAT E. solar charging by enabling you to adjust the panel to better
face the sun. The ARM-UNI is lightweight, easy to install, and is
R(EGTPR-REVA-T95) ideal for boats, trucks, and RVs. Tilting the panel can increase
performance up to 40%.

The Go Power! ARM Universal Mount attaches flat to the RV
roof for travelling and adjusts from 0-75 degrees (to face either
side) when parked. The Arm-Uni tilts in two directions within
seconds and without the need of tools.

Installing your ARM-UNI Mount is easy. Everything is included in
the Go Power! RV Kit. With basic tools, you can install it or let
your qualified Go Power! RV dealer do it for you.

Caution! Do not drive with the ARM-UNI in the upright position
as it may damage the solar module and the ARM-UNI. Be sure
to adjust the ARM-UNI to the “flat” and locked position before
driving.

O(GVEPR-RLVA-1N9D0E) R Universal Tilt Mount ARM-UNI

• Easy and quick to install
• Ideal for boats, trucks and RVs
• Tilting can increase performance up to 40%
• Adjustable without tools

SPECIFICATIONS* ARM-UNIVERSAL TILT MOUNTS

Weight 0.7 kg / 1.55 lbs
Adjusts 0-75 degrees

UPC 8-39085-00138-7

*Specifications subject to change without notice

© 2017 Go Power! Doc: SPEC_GP_ARM_UNI_vE gpelectric.com | 866.247.6527 | [email protected]

GP-AGM-100-12V

DEEP CYCLE SOLAR BATTERY

Features:

• AGM deep cycle battery
• Ideal for solar applications and

inverter systems
• Maintenance-free, sealed construction
• Spill proof / leak proof (VRLA)
• ABS case and cover
• UL recognized
• 100% recyclable
• Integrated carrying handles

SPECIFICATIONS AGM, VRLA deep cycle battery MATERIALS ABS
Technology 12 V Case and Cover Absorbent Glass Mat (AGM)
Nominal Voltage 110 Ah Separator PbO2 + Pb
Nominal Capacity 110.0 Ah/1.10A (100hr,1.80V/cell) Active Diluted Sulfuric Acid
100.0 Ah/5.00A (20hr,1.80V/cell) Electrolyte Rubber, opening pressure 8-20kPa
Rated Capacity 95.2 Ah/9.52A (10hr,1.80V/cell) Venting Valve
83.0 Ah/16.6A (5hr,1.75V/cell)
Nominal Operating 77 ±5 °F (25 ±3 °C) MECHANICAL 12.01 in / 305mm
Temperature Length 6.61 in / 168 mm
Operating Discharge, Storage: -4~140°F (-20~60°C) Width 8.15 in / 207 mm
Temperature Range Charge: -4~122°F (-20~50°C) Height
Capacity Correction 104°F (40°C) 103% Total Height 9.02 in / 229 mm
for Temperature 77°F (25°C) 100% (including terminals)
Variations 32°F (0°C) 86% BCI Group # 27
Maximum Discharge Weight 67.5 lbs / 30.6 kg
Current 1200 A (5s) Carrying Integrated flush mount handles
Internal Resistance
Terminals Approx. 4.9mΩ REPRESENTED IN YOUR REGION BY:
T14
Cycle Use Torque: 11 ~ 14.7 Nm (97.28 - 130 in*lbs)
Initial Charging Current less than 30.0 A
Standby Use Voltage: 14.4 V~15.0 V at 77°F (25°C)
Temp. Coefficient -30mV/°C
Certifications No limit on Initial Charging Current
Voltage: 13.5 V~13.8 V at 77°F (25°C)
Self Discharge Temp. Coefficient -20mV/°C
UL; CE; IEC60896-21 & 22
Cycle Life Batteries can be stored for up to 6 months
77oF (25oC) before a freshening charge is required.
*Batteries stored at temperatures greater than
77°F (25°C) will require a recharge sooner.
100% Depth of Discharge ~ 250 cycles

50% Depth of Discharge ~ 1100 cycles
30% Depth of Discharge ~ 2250 cycles

CarmanGaoh PToewchenro!l|oggpieesleCcotrripc..c|ocmarm| aTnealehp.choomne:|1T.e8l6e6p.h2o4n7e.6: 512.275|0.E3m80a.i0l:0s5a2le|sE@mgapiel:[email protected]

GP-AGM-100-12V

DEEP CYCLE SOLAR BATTERY

Battery Self-Discharge Over Temperature Battery Cycle Life

100 77oF (25oC)

Rated Capacity Available (%)75 100
Extracted Capacity (%) 90
50 30°C 20°C 8°C 80
86°F 68°F 46°F 70
40°C 60
104°F 50
40
25 30
03 6 20

9 12 15 18 21 24 27 0 500 1000 1500 2000 2500 3000 3500 4000

Storage Time (months) Cycles

TERMINAL DIMENSIONS 0.626 in [15.9 mm] 0.512 in [13.0 mm]
0.685 in [17.4 mm]

0.394 in [10.0 mm] 0.709 in [18.0 mm] 0.709 in [18.0 mm]
0.866 in [22.0 mm] 0.866 in [22.0 mm]

0.394 in [10.0 mm] ø 0.335 in [8.5 mm]
ø 0.354 in [9.0 mm]

T14 -1 Positive T14 - 2 Negative

8.15 in [207 mm] + + 6.61 in [168 mm]
9.02 in [229 mm]
12.01 in [305 mm]
6.61 in [168 mm]

UL Recognized LEAD RETURN

Component

MH29024

RECYCLE Pb

Specifications subject to local environmental conditions. © 2018, Go Power! US and International patents apply. “Go
Specifications may be subject to change. Power!” and the Go Power! logo are registered trademarks

Document: GP-AGM-100_Spec_Sheet_RevA

CarmanGaoh PToewchenro!l|oggpieesleCcotrripc..c|ocmarm| aTnealehp.choomne:|1T.e8l6e6p.h2o4n7e.6: 512.275|0.E3m80a.i0l:0s5a2le|sE@mgapiel:[email protected]

FLEX-100

SOLAR MODULE

Solar FlexTM solar panels are designed to provide a powerful
charging solution for batteries. Unlike other ‘thin’ products,
Solar FlexTM uses high-efficiency monocrystalline cells that
produce more power per square foot than any other
flat panel on the market.
An impermeable lamination coats the entire module,
allowing it to flex against curved areas and eliminating any
need for a bulky frame. The flat, lightweight module is less
than 1/8 inch thick and provides an extremely durable
surface. The panel can be affixed by adhesive or screw
mounting options and quick-connect MC4 cables are an
added bonus for ease-of-installation.
Solar FlexTM panels are aerodynamic and DURABLE -
a virtually unbreakable solar battery charger.

FLEX-100 SOLAR MODULE

The FLEX-100 is ideal for: REPRESENTED IN YOUR REGION BY:
• Trailers, long-haul and heavy-duty trucks
• Utility service vehicles
• RV/Marine

Features
• High-efficiency, back-contact solar cells
• Penetrating or adhesive mounting options
• Curves up to 30 degrees
• Durable surface is less than 1/8 in / 3 mm thick
• Industry standard quick-connect cables (MC4)

work in series or in parallel
• Marine grade material
• Up to 82% lighter than other solar modules

Go PowerC!a(Armwhaonllya-ohwnTeedcshubnsoidliaorygoief VsalCteorrarpPr.o|duccatsr,mLLCa.)n|aghp.ceolemctr|icT.ecloempho|nTee:le1p.2h5o0n.e3:810..806065.224|7E.6m5a2i7l:|inEfom@aicl:[email protected]

FLEX-100

SOLAR MODULE

44.6 in MC4 Negative
1134 mm

SPECIFICATIONS 100W 21.4 in MC4 Positive
Rated power (Pm) 17.6V 544 mm
Maximum power voltage (Vmp) 5.68A Front Profile MC4 Connectors
Maximum power current (Imp) 20.8V
Open circuit voltage (Voc) Front Profile 24.0 in
6.14A 610 mm
Short circuit current (Isc) –0.38% / °C Grommets
Power coefficient Ø 0.2 in 23.0 in
Voltage coefficient –60.8mV / °C 584 mm
Current coefficient 5 mm
Max power tolerance 2.2mA / °C (x6) 43.2 in
Cell type +/- 5% 1098 mm
Solar cell efficiency Monocrystalline
Series fuse rating 21% 0.1 in
Maximum system voltage 10A 3 mm
Weight 600VDC
2.9 lb (1.35 kg)
Dimensions 44.6 x 21.4 x 0.1 in
1134 x 544 x 3 mm
Frame type / material Laminated TPT backsheet,
includes stainless steel
grommets

30° max. recommended bend
Power Specifications calculated at STC:
• Irradiance: 1000 W/m2
• Cell Temperature: 77 °F (25 °C)
• Air Mass: 1.5

Specifications subject to local environmental conditions. 20.0 in Side Profile
Specifications may be subject to change. 508 mm
“Go Power! ” and Go Power! logo are trademarks. Back Profile
© 2017, Go Power! by Valterra Power
Document: SPEC_FLEX-100_RevD

Go PowerC!a(Armwhaonllya-ohwnTeedcshubnsoidliaorygoief VsalCteorrarpPr.o|duccatsr,mLLCa.)n|aghp.ceolemctr|icT.ecloempho|nTee:le1p.2h5o0n.e3:810..806065.224|7E.6m5a2i7l:|inEfom@aicl:[email protected]

FLEX-30

SOLAR MODULE

Solar FlexTM solar panels are designed to provide a powerful FLEX-30 SOLAR MODULE
charging solution for batteries. Unlike other ‘thin’ products,
Solar FlexTM uses high-efficiency monocrystalline cells that
produce more power per square foot than any other
flat panel on the market.
An impermeable lamination coats the entire module,
allowing it to flex against curved areas and eliminating any
need for a bulky frame. The flat, lightweight module is less
than 1/8 inch thick and provides an extremely durable
surface. The panel can be affixed by adhesive or screw
mounting options and quick-connect MC4 cables are an
added bonus for ease-of-installation.
Solar FlexTM panels are aerodynamic and DURABLE -
a virtually unbreakable solar battery charger.



The FLEX-30 is ideal for:
• Trailers, long-haul and heavy-duty trucks
• Utility service vehicles
• RV/Marine

Features REPRESENTED IN YOUR REGION BY:
• High-efficiency, back-contact solar cells
• Penetrating or adhesive mounting options
• Curves up to 30 degrees
• Durable surface is less than 1/8 in / 3 mm thick
• Industry standard quick-connect cables (MC4)

work in series or in parallel
• Marine grade material
• Up to 82% lighter than other solar modules

Go PowerC!a(Armwhaonllya-ohwnTeedcshubnsoidliaorygoief VsalCteorrarpPr.o|duccatsr,mLLCa.)n|aghp.ceolemctr|icT.ecloempho|nTee:le1p.2h5o0n.e3:810..806065.224|7E.6m5a2i7l:|inEfom@aicl:[email protected]

FLEX-30 Gr
Ø
SOLAR MODULE

24.0 in
610 mm

24.4 in MC4 Negative
620 mm

SPECIFICATIONS 30W Front Profile M0.C14inPositive
Rated power (Pm) 3 mm
Maximum power voltage (Vmp) 17.6V 14.96 in MC4 Connectors
Maximum power current (Imp) 380 mm
Open circuit voltage (Voc) 1.70A Front Profile 24.0 in
Short circuit current (Isc) 610 mm
Power coefficient 21.0V Grommets Gro
Voltage coefficient Ø 0.2 in Ø0
Current coefficient 1.88A
Max power tolerance 5 mm 5
Cell type -0.38% / °C (x4) (
Solar cell efficiency
Series fuse rating -60.8mV / °C24.0 in 24.4 in 23.0 in
Maximum system voltage 2.2mA / °C 610 mm 620 mm 584 mm
Weight
+/- 5%
Dimensions
Monocrystalline
24.4 in Frame type / material
21%
620 mm
10A

600VDC

1.1 lb (0.49 kg)

24.4 x 14.96 x 0.1 in
620 x 380 x 3 mm
Laminated TPT backsheet,
includes stainless steel
grommets

30° max. recommended bend 0.1 in 0.1 in
Power Specifications calculated at STC: 3 mm 3 mm
• Irradiance: 1000 W/m2
• Cell Temperature: 77 °F (25 °C)
• Air Mass: 1.5

14.96 in 13.5 in Side Profile
380 mm Ba31c348k4.094Pm6rmiomnmfile

Specifications subject to local environmental conditions.
Specifications may be subject to change.

v Go PowerC!a(Armwhaonllya-ohwnTeedcshubnsoidliaorygoief VsalCteorrarpPr.o|duccatsr,mLLCa.)n|aghp.ceolemctr|icT.ecloempho|nTee:le1p.2h5o0n.e3:810..806065.224|7E.6m5a2i7l:|inEfom@aicl:[email protected]

FLEX-50

SOLAR MODULE

Solar FlexTM solar panels are designed to provide a powerful FLEX-50 SOLAR MODULE
charging solution for batteries. Unlike other ‘thin’ products,
Solar FlexTM uses high-efficiency monocrystalline cells that
produce more power per square foot than any other flat panel
on the market.
An impermeable lamination coats the entire module,
allowing it to flex against curved areas and eliminating any
need for a bulky frame. The flat, lightweight module is less
than 1/8 inch thick and provides an extremely durable
surface. The panel can be affixed by adhesive or screw
mounting options and quick-connect MC4 cables are an
added bonus for ease-of-installation.
Solar FlexTM panels are aerodynamic and DURABLE -
a virtually unbreakable solar battery charger.



The FLEX-50 is ideal for:
• Trailers, long-haul and heavy-duty trucks
• Utility service vehicles
• RV/Marine

Features REPRESENTED IN YOUR REGION BY:
• High-efficiency, back-contact solar cells
• Penetrating or adhesive mounting options
• Curves up to 30 degrees
• Durable surface is less than 1/8 in (3 mm) thick
• Industry standard quick-connect cables (MC4) work

in series or in parallel
• Marine grade material
• Up to 82% lighter than other solar modules

Go PowerC!a(Armwhaonllya-ohwnTeedcshubnsoidliaorygoief VsalCteorrarpPr.o|duccatsr,mLLCa.)n|aghp.ceolemctr|icT.ecloempho|nTee:le1p.2h5o0n.e3:810..806065.224|7E.6m5a2i7l:|inEfom@aicl:[email protected]

FLEX-50

SOLAR MODULE

44.9 in MC4 Negative
1140 mm

SPECIFICATIONS 50W MC4 Positive
Rated power (Pm) 17.6V
Maximum power voltage (Vmp) 2.88A MC4 Connectors
Maximum power current (Imp) 19.0V
Open circuit voltage (Voc) 11.3 in
3.04A 286 mm
Short circuit current (Isc) -0.38% / °C Front Profile
Power coefficient
Voltage coefficient -60.8mV / °C 12.0 in
Current coefficient 306 mm
Max power tolerance 2.2mA / °C
Cell type +/- 5% 44.9in
Solar cell efficiency Monocrystalline 1140mm
Series fuse rating 21%
Maximum system voltage 10A Grommets
Weight 600VDC 0.2in
1.6 lb (0.72 kg) 6mm
Dimensions 44.9 x 11.3 x 0.1 in
1140 x 286 x 3 mm
Frame type / material Laminated TPT backsheet,
includes stainless steel
grommets

30° max. recommended bend 22.45in
Power Specifications calculated at STC: 570mm
• Irradiance: 1000 W/m2
• Cell Temperature: 77 °F (25 °C) 0.1 in
• Air Mass: 1.5 3 mm

Specifications subject to local environmental conditions. Back Profile Side Profile
Specifications may be subject to change.
Document: SPEC_FLEX-50_RevD

Go PowerC!a(Armwhaonllya-ohwnTeedcshubnsoidliaorygoief VsalCteorrarpPr.o|duccatsr,mLLCa.)n|aghp.ceolemctr|icT.ecloempho|nTee:le1p.2h5o0n.e3:810..806065.224|7E.6m5a2i7l:|inEfom@aicl:[email protected]

Complete Solar
& Inverter Systems

TOTAL COMFORT WHEREVER THE JOURNEY TAKES YOU

Go Power! complete solar and inverter systems ALL KITS INCLUDE:
allow you to charge batteries and run AC-powered
appliances and electronics, like microwaves • 30 amp digital solar controller
and TVs—without starting a generator or • All mounting hardware
connecting to the grid! • 25 year limited power output warranty

WEEKENDER ISW
Ideal for weekend RVing.

• 190 watts / 9.3 amps solar charging kit
• 1500 watt pure sine wave inverter +

transfer switch
• 30 amp pulse width modulated digital regulator
• Inverter fuse/cable kit and remote
• Can accept 2 solar expansion kits
• Suggested battery bank: 2

SOLAR ELITE
Ideal for extended RVing, up to a week.

• 380 watts / 18.6 amps solar charging kit
• 2000 watt pure sine wave inverter charger

with built-in 100 amp battery charger and dual
leg 50 amp transfer switch
• Inverter fuse/cable kit and remote
• Can accept 1 solar expansion kit
• Suggested battery bank: 4

© 2018 Go Power! Doc: SPEC_GP_COMPLETE-SYSTEMS_RevE SOLAR EXTREME
Our largest system, ideal for full-time RVing.

• 570 watts / 27.9 amps solar charging kit
• 3000-watt pure sine wave inverter charger

with built-in 125 amp battery charger and dual
leg 50 amp transfer switch
• Inverter fuse/cable kit and remote
• Suggested battery bank: 4+

gpelectric.com | 866.247.6527 | [email protected]

Complete Solar
& Inverter Systems

SOLAR PANEL GP-PV-190M

SPECIFICATIONS* 190 watts
9.3 amps
Output Power 19.11V
Rated Current 59.1 x 26.3 x 1.58 in / 1500 x 668 x 40 mm
Rated Voltage 26.4 lb (12 kg )
Dimensions of Panel (inches)
Panel Weight
*Specifications subject to change without notice

DIGITAL SOLAR CONTROLLER GP-PWM-30

SPECIFICATIONS* 12V
30A
Nominal System Voltage 6V - 15.5V
Max Solar Array Current 28V
Battery Voltage Range
Max Solar Panel Input Voltage
*Specifications subject to change without notice

INVERTER AND INVERTER CHARGER

SPECIFICATIONS* GP-SW1500-TS GP-IC-2000-12 GP-IC-3000-12
Output Power 1500W
Surge Power (100 milliseconds) 2400W 2000W 3000W
Transfer Switch 20A
Battery Charger N/A 4000W 6000W
100A 125A
Dimensions 11.14” x 5.04” x 13.82” 2x 50A 2x 50A
(240VAC splt-phase) (240VAC splt-phase)
Weight 12.13 lbs
*Specifications subject to change without notice 13.7” x 12.6” x 8.07” 13.7” x 12.6” x 8.07”
(14.9” with terminals) (14.9” with terminals)

38.7 lbs 51.9 lbs

Q: What AC Typical inverter (AC power) loads
devices will you
run at the same 150 - 600 watts
time? Your AND 300 - 1000 watts
largest load will
determine what OR 1500 - 2000 watts
inverter (and
‘System’) is AND AND 2000 - 3000 watts
required.

Review individual device specifications for actual wattage requirements.

© 2018 Go Power! Doc: SPEC_GP_COMPLETE-SYSTEMS_RevE gpelectric.com | 866.247.6527 | [email protected]

POWERFUL AND ECONOMICAL BATTERY CHARGING KITS

GP-ECO-80 / GP-ECO-20 / GP-ECO-10

Solar starter kit comes with everything you need
to install on your rooftop.

80 watt solar charging kit for weekend camping

• Includes 25' set of MC4 solar cables
and 10 amp digital solar controller

• 10 amp flush-mount digital solar controller
• 25 year limited solar panel output power warranty

20 watt solar kit to trickle charge your batteries
• Include 25' of solar cables

• 10 year limited solar panel output power warranty

• 10 amp flush-mount digital solar controller

10 watt solar kit to trickle charge your batteries
• 23’ cable with built-in fuse
• 10 year limited solar panel output power warranty

Includes Digital pulse width modulated (PWM) solar High-efficiency solar 10/25
everything controller regulates the battery charging panels with tempered YEAR
for a simple system and prevents over-charging and glass to withstand hail
installation: damage to the battery. Simple push button or light debris. limited power
all mounting operation. For 80 watt and 20 watt kits output
hardware only. 5 year solar controller warranty. AUTHORIZED DEALER warranty
and solar
cables.

.

© 2017 Go Power! Doc: SPEC_GP-ECO-80-20-10_SERIES_revE gpelectric.com | 1.866.247.6527 | [email protected]

ECO SOLAR SERIES SPECIFICATIONS ®

powered by

Solar Panel

SPECIFICATIONS GP-ECO- 80 GP-ECO-20 GP-ECO-10

Rated Power (Pm) 80 W 20 W 10 W
Maximum Power Voltage (Vmp) 18.4 V
Maximum Power Current (Imp) 4.35 A 17.5 V 17.5 V
Open Circuit Voltage (Voc) 22.8 V
Short Circuit Current (Isc) 4.60 A 1.14 A 0.57 A
Cell type Monocrystalline
Max System Voltage 1000 VDC 21.6 V 21 V
Weight 13.2 lb (6 kg)
Dimensions 30.71 x 26.46 x 1.38 in 1.21 A 0.62 A
(780 x 672 x 35 mm)
Frame type / material Monocrystalline Monocrystalline
Warranty (Limited Power Output)* 25 year
600 VDC 600 VDC
*see website for full warranty details
3.97 lb (1.8 kg) 1.7 lb (0.8 kg)

13.58 x 18.50 x 0.98 in 13.19 x 9.25 x 0.98 in
(345 x 470 x 25 mm) (335 x 235 x 25 mm)

Clear anodized aluminium frame

10 year 10 year

Digital Solar Controller OPTIONAL (For 80 Watt Only)
CABLE ENTRY PLATE

SPECIFICATIONS GP-PWM-10 Use our Cable Entry Plate with a
Go Power! Solar Kit to run your wire
Nominal System Voltage 12V where you want and reduce exposed GP-CEP
Max Solar Array Current 10A cables on the roof.
Battery Voltage Range 9V -- 15.5V
Max. Solar panel input voltage Built for easy expansion
Operating Consumption 28V Cuts installation time
Display Consumption 6mA Protects cable connections
Temp. Compensation 10mA Clean and tidy wire configuration
Operating Temperature -13mV/ºF (- 24mV/ºC ) Eliminates possibility of leaks
Humidity - 40 to 185º F (- 40 to 85ºC) Connects with industry standard
Dimensions (H x W x D): 99% N.C. MC4 cables (included in Go
Weight 3.94 x 4.02 x 1.14 in (100 x 102 x 29 mm) Power! kits)
Maximum Wire Gauge: 6.3 oz (178 grams) 5 year warranty
Warranty #4 AWG

Protection 1 year

Battery Reverse Polarity, Solar Array Reverse
Polarity, Over temperature, Over Current

80 watt panel 1.38 in 20 watt.34 in panel 25.12 in 10 watt panel
35 mm 8(3x1.46385.)5mm8 mmin 638 mm
26.46 in 25.12 in 12.56 in 9.25 in
.34 in 672 mm 638 mm 319 mm 0.98 in 235 mm
8.6 mm 25 mm
(x8) 8.15 in
207 mm
0.98 in
25 mm

4.60 in 3.31 in
117 mm 84 mm

2350.371 in 11.28 in 25.31 in 11.28 in 9.25 in 6.50 in
674830 mm 286.5 mm 643 mm 286.5 mm 235 mm 165 mm
18.50 in 13.19 in
4 - Ø7x11mm 470 mm 335 mm
mounting holes
1.38 in 4 - Ø7x11mm
35 mm Rear profile 1.38mionunting holes
35 mm
Rear profile Side profile Side profile Side profile
Rear profile

Specifications may be subject to change. gpelectric.com | 1.866.247.6527 | [email protected]

© 2017 Go Power! Doc: SPEC_GP-ECO-80-20-10_SERIES_revE

Solar FlexTM

SOLAR FLEXTM KITS FEATURE A NEW SOLAR MODULE THAT IS AERODYNAMIC AND DURABLE –
A VERSATILE SOLAR BATTERY CHARGER THAT CAN AVOID COSTLY CUSTOM MOUNTS

GP-FLEX-500 GP-FLEX-200 Go Power! Solar FlexTM kits use flexible, high-efficiency
back-contact solar modules that conform to almost any
GP-FLEX-100 GP-FLEX-50 GP-FLEX-30 surface. These kits use high-efficiency, marine-grade solar
modules - a versatile battery charging solution that:
GP-FLEX-50E GP-FLEX-100E 5 • avoids custom mounts (100 and 50 watt modules

MC4 branch connectors year warranty curve up to 30 degrees)
• can be affixed with adhesive or screws
solar output • provides a durable surface (modules are less than
power
1/8” / 3mm thick)
• is ideal for lightweight RVs (modules are 82% lighter)
GP-FLEX-500 / 200 / 100 kits include high-efficiency
monocrystalline solar panel(s) (500/200/100 watts), GP-
PWM-30 solar controller, MC4 connectors and mounting
hardware.
GP-FLEX-30 kit includes 1x high-efficiency monocrystalline
solar panel (30 watts), new GP-PWM-10 (10 amp) solar
controller, MC4 connectors and mounting hardware.
GP-FLEX-50 kit includes 1x high-efficiency monocrystalline
solar panel (50 watts), new GP-PWM-10 (10 amp) solar
controller, MC4 connectors and mounting hardware.
GP-FLEX-50E expansion kit includes 1x high-efficiency
monocrystalline solar panel (50 watts), MC4 branch
connectors and cable.
GP-FLEX-100E expansion kit includes 1x high-efficiency
monocrystalline solar panel (100 watts), MC4 branch
connectors and cable.

REPRESENTED IN YOUR REGION BY:

30° max. recommended bend gpelectric.com | 866.247.6527 | [email protected]
© 2018 Valterra Power, LLC | Doc: SPEC_GP_Flex-200-100-50-30-100E-50E_RevH

SOLAR FLEXTM SERIES SPECIFICATIONS ®

powered by

Solar Panel

SPECIFICATIONS GP-FLEX-500/200 GP-FLEX-100 GP-FLEX-50 GP-FLEX-30 GP-FLEX-100E GP-FLEX-50E
(5/2 X FLEX-100)
Monocrystalline Monocrystalline Monocrystalline Monocrystalline Monocrystalline
Cell type Monocrystalline 100 W 50 W 30 W 100 W 50 W
17.5V 17.5V 17.5V 17.5V 17.5V
Rated Power (Pm) 500W / 200 W 5.68A 2.88A 1.70A 5.68A 2.88A
21.0V 19.0V 21.0V 21.0V 19.0V
Maximum Power Voltage (Vmp) 17.5V 6.28A 3.04A 1.88A 6.28A 3.04A
600VDC 600VDC 600VDC 600VDC 600VDC
Maximum Power Current (Imp) 28.4A/11.36A 2.9 lbs (1.35 kg) 1.6 lbs (0.72 kg) 1.1 lb (0.49 kg) 2.9 lbs (1.35 kg) 1.6 lbs (0.72 kg)

Open Circuit Voltage (Voc) 21.0V 42.1 x 11.3 x 0.1 in
(1070 x 286 x 3 mm)
Short Circuit Current (Isc) 31.4A/12.56A

Max System Voltage 600VDC

Weight 14.5lbs (6.6 kg) /
5.82 lbs (1.7 kg)

Dimensions 44.6 x 21.4 x 0.1 in 44.6 x 21.4 x 0.1 in 42.1 x 11.3 x 0.1 in 24.4 x 14.96 x 0.1 in 44.6 x 21.4 x 0.1 in
(1134 x 544 x 3 mm) (1134 x 544 x 3 mm) (1070 x 286 x 3 mm) (620 x 380 x 3mm) (1134 x 544 x 3 mm)

Digital Solar Controller

SPECIFICATIONS* GP-PWM-30 GP-PWM-10 OPTIONAL
CABLE ENTRY PLATE
Nominal System Voltage 12V 12V GP-CEP
Max Solar Array Current 30A 10A Use our Cable Entry Plate with a Go Power! Front Profile 30 watt
Battery Voltage Range 6V – 15.5V 6V – 15.5V Solar Kit to run your wire where you want
Max. Solar panel input voltage and reduce exposed cables on the roof.
Operating Consumption 28V 28V
Display Consumption 6mA 6mA DD Built for easy expansion
Temp. Compensation 10mA 10mA DD Cuts installation time
- 24mV/ºC / -13mV/ºF - 24mV/ºC / -13mV/ºF DD Protects cable connections
Operating Temperature - 40 to 85ºC / - 40 to 85º C / DD Clean and tidy wire configuration
- 40 to 185ºF - 40 to 185º F DD Eliminates possibility of leaks
Humidity 99% N.C. 99% N.C. DD Connects with industry standard MC4

Dimensions (H x W x D): 108 x 190 x 35 mm; 100 x 102 x 29 mm; cables (included in Go Power! kits)
4.25 x 7.48 x 1.38 in 3.94 x 4.02 x 1.14 in DD 5 year warranty
Weight
Maximum Wire Gauge: Front Profile 100/50 watt
Warranty
300 g; 10.6 oz 178 grams; 6.3 oz junction
Protection box
#4 AWG #4 AWG
9.25 in
5 years 5 years 13.58 in

0.98 in

Battery Reverse Polarity, Solar Array Reverse JjuunncctitoionnbBooxx 24” / JjuunncctitoionnbBooxx
Polarity, Over temperature, Over Current w/ddioioddeess 0.61m w/ddioioddeess
7ft cable labeclables
w/built-in 13.19 in
fuse 7ft cable label 18.50 in
w/built-in
fuse

Rear view grommets

Side view

30 mm (1.18 in) Rear view

638 mm (25.12 in)

MC4 connectors

770 mm (30.31 in) 900 mm MC4 Negative

MC4 Positive

Side view Rear view

Specifications are subject to change. gpelectric.com | 866.247.6527 | [email protected]

© 2018 Valterra Power, LLC | Doc: SPEC_GP_Flex-200-100-50-30-100E-50E_RevH

40 Amp MPPT
Solar Controller

INCREASES BATTERY LIFE BY PREVENTING OVERCHARGING

SPECIFICATIONS

System Voltage 12/24V (auto-recognition)
-24mV / K (12V systems), - 48mV/K (24V
GP-MPPT-R Temperature Compensation Systems)
Controller Operating Battery 9V – 15.5V (12V system), 18 – 31V (24V
Voltage Range (min. - max.) [V] system)
Max Charge Current 40A

Over-Voltage Protection 15.5/31.0V

GP-MPPT-40 Max Panel Input Voltage 150 Voc

Max PV Power Input 600W@12V / 1200W @24V

Min PV Voltage Input 16V (12V Systems) / 33V (24V Systems)
0.7W (60mA typical at 12.0V, 30mA typical at
Idle Self-Consumption 24.0V)
Negative Grounding
Maximum Power Point Tracking solar charge controller Grounding
Ambient Temperature -40° to +60° C
The Go Power! 40-Amp MPPT solar controller brings maximum Battery Type
Lead Acid (SEALED, AGM, Flooded)
its class, it maintains the life of the battery by protecting it from Max Wire Cross Section
overcharging. When your battery has reached a 100% state AWG 2
of charge, the Controller prevents overcharging by limiting the Dimensions
169 x 173 x 57 mm
Weight
1.1 kg
The GP-MPPT-40 optimizes solar charging capacity in mobile Type of Protection
systems in all sun and tilt conditions while allowing the use Warranty IP20

5 Years

Model #: GP-MPPT-40 BATTERY CHARGING PROFILE SEALED/GEL AGM FLOODED
14.4V
• Stack up to two MPPT-40 controllers for twice the array Bulk Charge Voltage Set Point 14.1V 14.4V 14.4V
capacity Absorption Charge Voltage (30 min / day) 14.4V
14.1V 14.4V
• Charges 12/24V Batteries with higher voltage arrays Max. Power Boost Charge Voltage: 14.4V
• Accepts Series wired PV inputs up to 150 Voc (STC) Automatic (2h if V < 12.3V) 14.1V 14.4V 13.7V
•
• Heavy-duty terminals for low resistance connections Max. Power Boost Charge Voltage: 14.1V 14.4V 14.9V
• Maximizes energy yield in any insolation/array tilt conditions Manual (2h if activated) 13.7V 13.7V
• Innovative current-mode control reacts faster to changes in Float Charge Voltage Disabled Disabled

sun conditions than competition Equalize Charge Voltage
• (2h / 28 days or after V < 12.1V)
•
AUTHORIZED DEALER:
PWM controllers
•
• 5-year warranty

© 2017 Go Power! by Valterra Doc: SPEC_GP-MPPT-40-Controller_vA gpelectric.com | 866.247.6527 | [email protected]

Multi-Panel
Solar Kits

HARNESS THE FULL POWER OF THE SUN WITH OUR LARGEST KITS

Go Power! solar kits allow you to charge batteries ALL KITS INCLUDE:
and run AC-powered appliances and electronics,
like microwaves and TVs—without starting a • 40-amp amp MPPT solar controller
generator or connecting to the grid! • Solar Controller Remote
• All mounting hardware

SOLAR AE 4
Ideal for running an all-electric fridge.

• 760 watts / 37.2 amps solar charging kit
• 40-amp MPPT Solar Controller
• Mounting Hardware
• Suggested battery bank: 4-6

SOLAR AE 6 Pair a multi-panel kit with our Inverter
Our largest kit, ideal for full-time RVing. Charger to power your AC loads.
• 1140 watts / 55.8 amps solar charging kit
• 2x 40-amp MPPT Solar Controller
• Mounting Hardware
• Suggested battery bank: 4-8

Solar Flex

FLEX-500
Our largest flexible panel system.
• 500 watts / 26.7 amps solar charging kit
• 40-amp MPPT Solar Controller
• Mounting Hardware
• Suggested battery bank: 4+

© 2018 Go Power! Doc: SPEC_GP_MULTI-PANEL-SYSTEMS_RevC gpelectric.com | 866.247.6527 | [email protected]

Multi-Panel
Solar Kits

AE KIT SOLAR PANEL SPECS GP-PV-190M
190 watts
SPECIFICATIONS* 9.3 amps
Output Power 19.11V
Rated Current
Rated Voltage 59.1 x 26.3 x 1.58 in / 1500 x 668 x 40 mm
Dimensions of Panel (inches) 26.4 lb (12 kg )
Panel Weight 25-year
Power Output Warranty
GP-FLEX-100
*Specifications subject to change without notice 100 watts
5.7 amps
FLEX KIT SOLAR PANEL SPECS 20.8V

SPECIFICATIONS* 44.6 x 21.4 x 0.1 in
Output Power 2.9 lb
Rated Current
Rated Voltage GP-MPPT-40
Dimensions of Panel (inches) 12/24V
Panel Weight 40A

*Specifications subject to change without notice 9V - 15.5V
600W @ 12V / 1200W @ 24V
DIGITAL SOLAR CONTROLLER

SPECIFICATIONS*
Nominal System Voltage
Max Solar Array Current
Battery Voltage Range
Max Solar Panel Input Voltage

*Specifications subject to change without notice

Q: What AC Typical inverter (AC power) loads
devices will you
run at the same 150 - 600 watts
time? Your AND 300 - 1000 watts
largest load will
determine what OR 1500 - 2000 watts
inverter (and
‘System’) is AND AND 2000 - 3000 watts
required.

Review individual device specifications for actual wattage requirements.

© 2018 Go Power! Doc: SPEC_GP_MULTI-PANEL-SYSTEMS_RevC gpelectric.com | 866.247.6527 | [email protected]

LARGE SOLAR KITS FOR DC POWER ESSENTIALS AND BATTERY MAINTENANCE

OVERLANDER OVERLANDER / RETREAT

High-efficiency RETREAT Your battery will power lights, fans and other DC
solar modules appliances. Solar will help to ensure a healthy battery
with MC4 charge and extend the life up to 50%! Save the cost of
connectors and shore power and battery replacements.
tempered glass
to withstand • The OVERLANDER is our largest, most popular single
hail or light panel 12 volt kit, providing 190 watts and 9.3 amps of
debris. solar power.

Digital pulse width modulated (PWM) Includes everything for • The RETREAT is our most efficient solar panel providing
solar controller regulates the battery a simple installation: 100 watts and 5.43 amps – best square ft / watt
charging system and prevents all mounting hardware
over-charging and damage to the and 50' of MC4 quick- • Maintenance free and designed to provide
battery. Simple push button operation. connect cables. decades of uninterrupted power
5 year warranty
• 25-year limited solar panel output power warranty

• Easy to install, flush mountable 30 amp digital controller

• Expandable (allows for 570 watts of solar with
the same controller)

EXPANSION KITS: 25
OVERLANDER-E / RETREAT-E
YEAR
Expand your solar as your power needs grow!
Our GP-PWM-30 solar controller can accept approximately limited power
480 watts (30 amps) of solar power. output
warranty
• Includes 1 solar module, mounting hardware and
MC4 branch connectors AUTHORIZED DEALER:

.

MC4 branch connectors

© 2018 Go Power! Doc: SPEC_GP_OVERLANDER-RETREAT_RevF gpelectric.com | 866.247.6527 | [email protected]

LARGE SOLAR KIT SPECIFICATIONS

Solar Panel

SPECIFICATIONS RETREAT / RETREAT-E OVERLANDER / OVERLANDER-E

Rated Power (Pm) 100W 190 W
Maximum Power Voltage (Vmp) 18.4V 19.11V
Maximum Power Current (Imp) 5.43A 9.3A
Open Circuit Voltage (Voc) 22.6V 22.78A
Short Circuit Current (Isc) 5.75A 9.32A
Cell type Monocrystalline Monocrystalline
Max System Voltage
Weight 17.6 lb (8kg) 1000VDC
Dimensions 47.09 x 21.46 x 1.38 in
1196 x 545 x 35 mm 26.4 lb (12 kg)
Frame type / material 59.1 x 26.3 x 1.58 in
Warranty (Limited Power Output)* 1500 x 668 x 40 mm
Clear anodized aluminum frame
*see website for full warranty details 25 year

Digital Solar Controller OPTIONAL
CABLE ENTRY PLATE
SPECIFICATIONS GP-PWM-30
Use our Cable Entry Plate with a
Nominal System Voltage 12V 26.30 in Go Power! Solar Kit to run your
Max Solar Array Current 30A 668 mm wire where you want and reduce
Battery Voltage Range 6V -- 15.5V exposed cables on the roof.
Max. Solar panel input voltage
Operating Consumption 28V Built for easy expansion
Display Consumption 6mA Cuts installation time
Temp. Compensation Protects cable connections
Operating Temperature 10mA Clean and tidy wire configuration
Humidity DD Eliminates possibility of leaks
Dimensions (H x W x D) -13mV/ºF (- 24mV/ºC) Connects with industry standard
Weight MC4 cables (included in Go
Maximum Wire Gauge - 40 to 185ºF (-40 to 85ºC) Power! kits)
Warranty 5 year warranty
99% N.C. 59.06 in
Protection 4.25 x 7.48 x 1.38 in (101850x01m9m0 x 35 mm)
GP-CEP

10.6 oz (300 g)

#4 AWG

5 years

Battery Reverse Polarity, Solar Array Reverse
Polarity, Over temperature, Over Current

25.12 in 1.58 in 1.38 in
638 mm 50 mm 35 mm

0.34 in
8.6 mm
(x8)

36.25 in 11.28 in 23.46 in 2φ- 4
920.8 mm 286.5 mm 596 mm Grounding holes

4-9×14
Mounting holes

1.18 in
30 mm

Specifications may be subject to change. 190 watt panel 100 watt panel
Specifications subject to local environmental conditions.
“Go Power!” and Go Power! logo are trademarks. gpelectric.com | 866.247.6527 | [email protected]

© 2018 Go Power! Doc: SPEC_GP_OVERLANDER-RETREAT_RevF

Smart Battery
Chargers

OUR SMART CONVERTERS CHARGE FASTER THAN CONVENTIONAL CHARGERS

(10 AMPS)

Features:

• Advanced 8-bit microprocessor control circuit, reverse
battery protected by fuse, ignition protection

• Output short circuit protection and overpower protection
• Switch mode technology
• Easy-to-read LED for system status
• Compact size and lightweight
• Power factor corrected to 0.98 = efficient charge
• Uses less AC power than conventional chargers of

similar output
• Ideal for sealed or flooded batteries
• Small, lightweight and quiet

The Go Power! 10 Amp Smart Charger is designed SPECIFICATIONS* GPSC-12-10A
specifically to extend the life of deep-cycle battery banks. Current 10A
With a unique microprocessor controlled electronic design, Voltage 12V
the Go Power! Smart Charger offers multi-stage charging Power Watt 160W
to accurately recharge and maintain your battery banks
without electrolyte loss. Input Voltage 120-240 VAC / 50~60 Hz (Automatic Switching)
Power Factor 0.98
The Smart Charger has a high frequency switching mode Bulk Voltage 14.4 VDC
and is equipped with a micro-controller and a PFC circuit. Float Voltage 13.65 VDC
This design allows this Battery Charger to perform with Banks 1
intelligent battery management and reliable operation. Safety UL 1236 Pending, CE, TUV

The Smart Charger features a three stage charging pro- Battery Type Wet Acid or Bulk Rating > 14,3 (usually non sealed)
cess that provides more sophisticated and faster charging
than conventional transformer type chargers. The charging FCC Class A EN55022: 1994/A1: 1995/A5: 1997
stages are: EMC EN61000-3-2: 2000, EN61000-3-3: 1995 &

1. Bulk Stage: Constant current charging at a high EN55024: 1998
voltage level at maximum amperage
Dimensions 51 x 84 x 208 mm
2. Absorption Stage: Tapering current for the last 10-20%
of charge Weight 0.9 kg / 2 lbs

3. Float Stage: Lower voltage float mode to prevent Warranty 1 Year
electrolyte loss
*Specifications subject to change without notice
It also features an LED display, reporting charging state,
short circuit protection and over-temperature protection.
The high efficiency electronic design makes the
GPSC-12-10A the ideal choice for use with generators and
for backup charger applications.

© 2017 Go Power! Doc: SPEC_GP_SmartCharger_10_amp_vD gpelectric.com | 866.247.6527 | [email protected]

MODIFIED SINE WAVE

INVERTER

Large, Heavy Duty Modified Sine Wave Inverters (1750 - 5000 watts)

GP-1750 GP-3000 GP-1750HD / GP-3000HD / GP-5000HD

GP-5000 Run standard AC devices wherever you go. Go Power!’s
new Heavy Duty Modified Sine Wave Inverters bring
reliable power to your RV, boat, truck, or even your
home if the power goes out.

• Produces an adequate replica of AC power for
optimal performance

• Runs most devices in wattage range without
interference

• USB connectivity
• Digital display
• Heavy-duty steel case
• Wide voltage range
• Full overload protection
• 1 year warranty

SPECIFICATIONS* GP-1750HD GP-3000HD GP-5000HD

Continuous Output Power 1750 W (VA) 3000 W (VA) 5000 W (VA)
Maximum Surge Rating 3500 W (VA)
Output Waveform 6000 W (VA) 10000 W (VA)
Output Voltage Range ≥80%
Input Voltage ≤1 A Modified Sine Wave
Efficiency
No Load Current Draw 100 - 120 VAC RMS +5/-15
USB Output
10.5 - 16 VDC

≥85% ≥80%

≤1.2 A ≤1.2 A

Protection 4.75 - 5.25 VDC / 2.1 A

Low Battery Alarm ± 0.5 V Overload, Over Temperature,
Over/Under Voltage, Short Circuit

10.5 V

Low Battery Shutdown ± 0.5 V 10 V

Operating Temperature Range 32˚F - 104˚F (0˚C - 40˚C)

Storage Temperature Range 14˚F - 122˚F (-10˚C - 50˚C)

Cooling Thermostatically Controlled Fan

AC Output Connections 3 Standard North American Outlets 4 Standard North American Outlets

Remote Power Option Yes

Dimensions (L x W x H) 8.07” x 8.86” x 3.50” 11.41” x 9.92” x 4.13” 18.50” x 9.92” x 4.13”
(205 mm x 225 mm x 89 mm) (290 mm x 252 mm x 105 mm) (470 mm x 252 mm x 105 mm)

Weight 6.42 lbs (2.91 kg) 10.54 lbs (4.78 kg) 15.65 lbs (7.10 kg)

Warranty 1 Year

Inverter Install Kits (sold separately) GP-DC-KIT3 GP-DC-KIT5

Remotes (sold separately) GP-REMOTE

*Specifications subject to change without notice

© 2018 Go Power!, Document: SPEC_GP-1750-3000-5000-HD_RevE gpelectric.com | 866.247.6527 | [email protected]

MODIFIED SINE WAVE

INVERTER

How to determine WHAT SIZE OF INVERTER to use

Your inverter charger is rated in watts. Most of your electrical appliances also have a wattage rating. This value helps you select the
right size of inverter. The chosen model of inverter should meet the largest load you wish to run.
The chart below estimates the wattage required to run a single appliance. To run multiple appliances simultaneously, choose an
inverter that matches the wattage of the combined items.

*B/C

150 - 300 W 400 - 1000 W 1100 - 5000 W

GP-225HD i
GP-400HD i
GP-800HD i
GP-1000HD
GP-1750HD Remotely turn your inverter on/off
GP-3000HD and SAVE BATTERY POWER.
GP-5000HD

*B/C = Battery Charging
Review individual product specs for actual wattage requirements

i = Ideal for high voltage alternators

PROTECT yourself and
your equipment.

Fuse and Cable Kits GP-HD-R

Go Power! DC installation kits include everything you need to Inverter Remote
properly connect your Go Power! inverter to the batteries safely.
The kit includes 10’ large gauge battery cables, tie downs, lugs Remotely power appliances or electronics with the
and the appropriate inverter fuse (class T fuse) and mounting compact Go Power! inverter remote. The remote
block. features an LED indicator showing inverter status, an
ON/OFF switch and 25’ of cable.
DC Install Kit Inverter Size
gpelectric.com | 866.247.6527 | [email protected]
GP-DC-KIT2 600-1000 W
GP-DC-KIT3 1100-1800 W
GP-DC-KIT4 2000-2500 W
GP-DC-KIT5 2600-3000 W

© 2018 Go Power!, Document: SPEC_GP-1750-3000-5000-HD_RevE

MODIFIED
SINE WAVE
INVERTER

SMALL MODIFIED sine wave inverters (175 - 600 watts)

GP-600 GP-600 / GP-300 / GP-175

GP-175 Run standard AC appliances wherever you travel. Silent,
lightweight and easy to use, Go Power! Inverters bring
GP-300 GP-300 and GP-175 models electricity to your RV, boat, truck or even your home in the
simply plugs into any 12 volt event of a power failure. With an inverter, your AC loads
Simply plug the item you accessory socket. run off your batteries and they can be used any time of day
wish to run into one of or night - without a generator.
the AC receptacles.
• Powerful and economical
• Light-weight and compact
• Thermal and overload protection
• Low voltage alarm shutdown
• Retail ready packaging
• 1 year warranty

SPECIFICATIONS* GP-175 GP-300 GP-600

Continuous Wattage 175W 300W 600W
Surge Rating
Output Waveform 210W 400W 860W
Output Voltage
Output Frequency +-1% Modified Sine Wave *B/C
Input Voltage
Efficiency 110 VAC RMS +5% / -10% GP-175
No Load Current Draw
Protection 60 Hz

Low Battery Alarm +-2% 10.5 -15 VDC GP-300

Low Battery Shut-down +-2% 80-90%
Operating Temp.Range
Storage Temp.Range 0.2 A GP-600
Cooling
AC Receptacle Overload, over-temperature, over-voltage and low voltage
(LxWxH) mm
10.5 V *B/C = battery charging
inches Review individual product specs for actual wattage requirements
Weight (kg/lbs)
Warranty 10.0 V
Inverter Install Kit
0 – 40 C / 32 – 104 F

-30 – 70 C / -22 – 158 F

Passive Continuous fan Continuous fan

122

135 x 53 x 46 165 x 89 x 51 229 x 86 x 51

5.3 x 2.1 x 1.8 6.5 x 3.5 x 2 9 x 3.4 x 2

0.5 / 1.1 0.8 / 1.8 2.1 / 4.6

1 year

Auto utility adaptor Auto utility adaptor Spring clamp

*Specifications subject to change without notice

© 2018 Go Power! Doc: SPEC_GP-175-300-600_vB gpelectric.com | 866.247.6527 | [email protected]

MODIFIED SINE WAVE

INVERTER

Small, Heavy Duty Modified Sine Wave Inverters (225 - 1000 watts)

GP-225 GP-800 GP-225HD / GP-400HD / GP-800HD /
GP-400 GP-1000
GP-1000HD

Run standard AC devices wherever you go. Go Power!’s
new Heavy Duty Modified Sine Wave Inverters bring
reliable power to your RV, boat, truck, or even your
home if the power goes out.

• Produces an adequate replica of AC power for
optimal performance

• Runs most devices in wattage range without
interference

• USB connectivity
• Heavy-duty steel case
• Wide voltage range
• Full overload protection
• 1 year warranty

SPECIFICATIONS* GP-225HD GP-400HD GP-800HD GP-1000HD

Continuous Output Power 225 W (VA) 400 W (VA) 800 W (VA) 1000 W (VA)

Maximum Surge Rating 450 W (VA) 800 W (VA) 1600 W (VA) 2000 W (VA)

Output Waveform Modified Sine Wave

Output Voltage Range 100 - 120 VAC RMS +5/-15

Input Voltage 10.5 - 16 VDC

Efficiency ≥80% ≥80% ≥80% ≥80%

No Load Current Draw ≤0.7 A ≤0.7 A ≤0.8 A ≤0.8 A

USB Output 4.75 - 5.25 VDC / 2.1 A
Protection
Low Battery Alarm ± 0.5 V Overload, Over Temperature,
Over/Under Voltage, Short Circuit

10.5 V

Low Battery Shutdown ± 0.5 V 10 V

Operating Temperature Range 32˚F - 104˚F (0˚C - 40˚C)

Storage Temperature Range 14˚F - 122˚F (-10˚C - 50˚C)

Cooling Thermostatically Controlled Fan

AC Output Connections 2 Standard North American Outlets

Remote Power Option No Yes

Dimensions (L x W x H) 5.27” x 3.86” x 2.05” 6.30” x 4.25” x 2.64” 7.48” x 4.88” x 2.95” 9.44” x 4.88” x 2.95”
(134 mm x 98 mm x 52 mm) (160 mm x 108 mm x 66 mm) (190 mm x 124 mm x 75 mm) (240 mm x 124 mm x 75 mm)

Weight 1.01 lbs (0.46 kg) 1.54 lbs (0.70 kg) 2.31 lbs (1.05 kg) 3.11 lbs (1.41 kg)

Warranty 1 Year

Inverter Install Kits (sold separately) Auto Utility Adapter GP-DC-KIT-2

Remotes (sold separately) No Remote Power Option GP-REMOTE

*Specifications subject to change without notice

© 2018 Go Power!, Document: SPEC_GP-225-400-800-1000-HD_RevC gpelectric.com | 866.247.6527 | [email protected]

MODIFIED SINE WAVE

INVERTER

How to determine WHAT SIZE OF INVERTER to use

Your inverter charger is rated in watts. Most of your electrical appliances also have a wattage rating. This value helps you select the
right size of inverter. The chosen model of inverter should meet the largest load you wish to run.
The chart below estimates the wattage required to run a single appliance. To run multiple appliances simultaneously, choose an
inverter that matches the wattage of the combined items.

*B/C

150 - 300 W 400 - 1000 W 1100 - 5000 W

GP-225HD i
GP-400HD i
GP-800HD i
GP-1000HD
GP-1750HD Remotely turn your inverter on/off
GP-3000HD and SAVE BATTERY POWER.
GP-5000HD

*B/C = Battery Charging
Review individual product specs for actual wattage requirements

i = Ideal for high voltage alternators

PROTECT yourself and
your equipment.

Fuse and Cable Kits GP-HD-R

Go Power! DC installation kits include everything you need to Inverter Remote
properly connect your Go Power! inverter to the batteries safely.
The kit includes 10’ large gauge battery cables, tie downs, lugs Remotely power appliances or electronics with the
and the appropriate inverter fuse (class T fuse) and mounting compact Go Power! inverter remote. The remote
block. features an LED indicator showing inverter status, an
ON/OFF switch and 25’ of cable.
DC Install Kit Inverter Size
gpelectric.com | 866.247.6527 | [email protected]
GP-DC-KIT 2 600-1000 W
GP-DC-KIT 3 1100-1800 W
GP-DC-KIT 4 2000-2500 W
GP-DC-KIT 5 2600-3000 W

© 2018 Go Power!, Document: SPEC_GP-225-400-800-1000-HD_RevC

GP-AGM-224-6V
DEEP CYCLE SOLAR BATTERY

Features:

• 6 volt AGM deep cycle battery
• Ideal for solar applications and

inverter systems
• Maintenance-free, sealed construction
• Spill proof / leak proof (VRLA)
• ABS case and cover
• UL recognized
• 100% recyclable
• 2-year warranty

SPECIFICATIONS AGM, VRLA deep cycle battery MATERIALS ABS
Technology 6V Case and Cover Absorbent Glass Mat (AGM)
Nominal Voltage 224 Ah Separator PbO2 + Pb
Nominal Capacity 224 Ah/11.2A (20hr, 5.25V/cell) Active Diluted Sulfuric Acid
194 Ah/19.4A (10hr, 5.25V/cell) Electrolyte Rubber, opening pressure 8-20kPa
Rated Capacity (25oC) 179 Ah/35.9A (5hr, 5.1V/cell) Venting Valve
77 ±5 °F (25 ±3 °C)
Nominal Operating MECHANICAL 10.24 in / 260 mm
Temperature Discharge, Storage: -4~140°F (-20~60°C) Length 7.09 in / 180 mm
Operating Charge: -4~122°F (-20~50°C) Width 9.72 in / 247 mm
Temperature Range 104°F (40°C) 102% Height
Capacity Correction 77°F (25°C) 100% Total Height 9.96 in / 253 mm
for Temperature 32°F (0°C) 85% (including terminals)
Variations BCI Group # 27
Maximum Discharge 2000 A (5s) Weight 67.25 lbs / 30.5 kg
Current Carrying Nylon Strap
Internal Resistance Approx. 1.4mΩ
Terminals T11 REPRESENTED IN YOUR REGION BY:
Brass Insert
Cycle Use Initial Charging Current less than 30.0 A
Voltage: 7.2 V~7.4 V at 77°F (25°C)
Standby Use No limit on Initial Charging Current
Certifications Voltage: 6.8 V~6.9 V at 77°F (25°C)
UL; CE; IEC60896-21 & 22
Self Discharge Batteries can be stored for up to 6 months
before a freshening charge is required.
Cycle Life *Batteries stored at temperatures greater than
77oF (25oC) 77°F (25°C) will require a recharge sooner.
100% Depth of Discharge ~ 300 cycles

50% Depth of Discharge ~ 700 cycles
30% Depth of Discharge ~ 1575 cycles

CarmanaGhoTPeocwhneorl!o|ggiepselCeocrtpri.c|.ccoamrma| nTealhe.pchoomne|:T1e.l8e6p6h.o2n4e7:.615.22570|.3E8m0.a0i0l:5s2a|leEs@magipl:[email protected]

GP-AGM-224-6V
DEEP CYCLE SOLAR BATTERY

Battery Self-Discharge Over Temperature Battery Cycle Life

100 77oF (25oC)

Rated Capacity Available (%) 75 Extracted Capacity (%) 100
90
50 30°C 20°C 8°C 80
86°F 68°F 46°F 70
40°C 60
104°F 9 12 15 18 21 24 27 50 500 1000 1500 2000 2500 3000 3500 4000
40
25 Storage Time (months) 30 Cycles
03 6 20

0

0.2306. i2n36[ i6n [m6m]mm]TERMINAL DIMENSIONS
0.236 in [6 mm]
0.787 in [20 mm]
00..37018.578iinn7 [[i8n20m[2mm0 m]m]m]

0.301.351in5 [i8n [m8 mm]m]

9.729i.n72[ i2n47[24m7m]mm] 7.09 in [180 mm] [ 933..055[4493m i.i0n5mn]4m i nm ]
99..97629i.in9n6[[ i22n543[725mm3mm]]mm] 7.097i.[n0990[ i1n8m0[m1]8m0m]mm]
9.96 in [253 mm] 107.2.0479.i0nin9[2[in1680[10m8m0mmm] ]m] 7.09 in [180 mm]
10.1204.2in4 [in26[206m0 mm]m]

UL Recognized LEAD RETURN

Component

MH29024

RECYCLE Pb

© 2017, Go Power! US and International patents apply. “Go
Power!” and the Go Power! logo are registered trademarks
Specifications subject to local environmental conditions.
Specifications may be subject to change. Document: SPEC_GP-AGM-224-6V_RevA

CarmanaGhoTPeocwhneorl!o|ggiepselCeocrtpri.c|.ccoamrma| nTealhe.pchoomne|:T1e.l8e6p6h.o2n4e7:.615.22570|.3E8m0.a0i0l:5s2a|leEs@magipl:[email protected]

3-IN-1 Inverter, charger and automatic transfer switch (2000 watt inverter)

GP-IC-2000 - 12 VOLT (DC INPUT)

The Go Power! 2000 watt Inverter Charger 2000 delivers top
features and performance at an economical price. It is a
3-in-1 system that expertly combines an inverter, battery charger
and automatic transfer switch into one powerful and lightweight
unit. The GP-IC-2000 has a compact footprint that saves space

cables to install!

Model # GP-IC-2000-12 The two 50 amp legs set its performance apart from common 50

• 2000W pure sine wave inverter; 4000W surge (100 milliseconds) full use of a 100 amp shore power service (240V) by passing
• through up to 12,000 watts of power! It is also compatible with all
• 100A battery converter/charger, power factor corrected 30 amp services.
• Automatic transfer switch, 2 legs at 50A each (240VAC split-phase)
• The inverter charger also includes a battery temperature sensor
• Industry standard protection features helping extend battery life.
• Meets UL 458 with marine supplement
• 3 year warranty PURE UL 458 CSA 22.2 Part 15,
SINE UL 1741 #107.1 Class B
WAVE

INVERTER SPECIFICATIONS 2000W CHARGER SPECIFICATIONS 120 VAC
Output Power (up to 40ºC) 4000W Input Voltage Nominal 80 - 140VAC
Surge Power (100 milliseconds) 3400W Input Voltage Range 15A
Surge Power (5 seconds) 35A Input Current 0.97 typical
Peak Output Current 17A Input Power Factor Correction > 85%
Continuous Output Current 115 VAC 3 stage with manual equalize
Output Voltage 60 Hz ±0.1Hz Charge Control 5 - 16VDC
Output Frequency Pure Sine Wave Output Voltage 100 ADC
Output Waveform 90% Output Current Remote Battery Sensor
9 - 17 VDC Change Temperature Compensation
DC Input Voltage Range 283 ADC -20˚C to 60˚C
Maximum Continuous DC Input Current Normal Mode:25W, ADDITIONAL SPECIFICATIONS (Over 40˚C output derates)
Sleep Mode: 5W 0 to 95% RH non condensing
No Load Power Consumption Split Phase In/Dual Out, Temperature 13.7” x 12.6” x 8.07” (14.9” with
Dual In/ Dual Out Humidity terminals)
AC Connections 349 x 321 x 205 mm (378 mm with
16ms Dimensions (L x W x H) terminals)
TRANFER RELAY SPECIFICATIONS 2 legs at 50A each (240V split-phase) 38.71 lbs (17.6 kg)
Transfer Time Net Weight
Transfer Relay Rating

© 2017 Go Power! Doc: SPEC_GP-IC-2000_RevE Marine Supplement) and to CSA
22.2 No. 107.1-01 FCC Path 15,
Class B

gpelectric.com | 866.247.6527 | [email protected]

THE POWER OF AN INVERTER

Your inverter charger is rated in watts. Most of your electrical appliances also have a wattage rating. This value helps you select
the right size of inverter. The chosen model of inverter should meet the largest load you wish to run.
The chart below estimates the wattage required to run a single appliance. To run multiple appliances simultaneously, choose an
inverter that matches the wattage of the combined items.

*B/C

150 - 300W 400-1000W 1100 - 3000W

GP-SW150

GP-SW300

GP-SW600

GP-SW1000

GP-HS1500 (can surge to 4000 watts)

GP-SW1500 i
i
GP-SW2000 i
i
GP-IC-2000 (can surge to 3400 watts)
GP-SW3000 MONITOR and CONTROL your
inverter charger.
*B/C = Battery Charging
Review individual product specs for actual wattage requirements

i = Ideal for high voltage alternators

PROTECT yourself and
your equipment.

Fuse and Cable Kits Inverter Charger Remote Model # GP-ICR-50

Go Power! Fuse and cable kits include everything you need simple operation, while providing detailed operational data
to safely connect the Go Power! Inverter Charger to your about your inverter charger.
batteries. The Installation kit includes 10’ large gauge battery
cables, tie downs, lugs and the appropriate inverter fuse • Easy-to-read, 4 line digital display panel
(class T fuse) and mounting block. • Change settings and modes of operation
• View real-time status of battery charging activity,
12 VOLT Inverter Size
GP-DC-KIT 4 2000-2500W inverter AC input and inverter status
GP-DC-KIT 5 2600-3000W • Monitor inverter/charger health and temperature
• 50 ft cable included
© 2017 Go Power! Doc: SPEC_GP-IC-2000_RevE • 3 year warranty

gpelectric.com | 866.247.6527 | [email protected]

3-IN-1 Inverter, charger and automatic transfer switch (3000-watt inverter)

GP-IC-3000 - 12 VOLT (DC INPUT)

The Go Power! 3000-watt Inverter Charger 3000 delivers top
features and performance at an economical price. It is a
3-in-1 system that expertly combines an inverter, battery charger
and automatic transfer switch into one powerful and lightweight
unit. The GP-IC-3000 has a compact footprint that saves space
and simplifies installation - there are fewer components and
cables to install!

Model # GP-IC-3000-12 The two 50 amp legs set its performance apart from common 50
amp inverter chargers. The configuration allows users to make
• 3000W pure sine wave inverter; 4800W surge (5 seconds) full use of a 100 amp shore power service (240V) by passing
• High inverter efficiency - >90% through up to 12,000 watts of power! It is also compatible with all
• 125A battery converter/charger, power factor corrected 30 amp services.
• Automatic transfer switch, 2 legs at 50A each (240VAC split-phase)
• Built-in handles offers easier handling during installation The inverter charger also includes a battery temperature sensor
• Industry standard protection features helping extend battery life.
• Meets UL 458 with marine supplement
• 3 year warranty PURE UL 458 CSA 22.2 Part 15,
SINE UL 1741 #107.1 Class B
WAVE
INVERTER SPECIFICATIONS 3000W 120 VAC
6000W CHARGER SPECIFICATIONS 80 - 140VAC
Output Power (up to 40ºC) 4800W 18A
Surge Power (100 milliseconds) 52A Input Voltage Nominal 0.97 typical
Surge Power (5 seconds) 25A Input Voltage Range >85%
Peak Output Current 115 VAC Input Current
Continuous Output Current 60 Hz ±0.1Hz Input Power Factor Correction 3 stage with manual equalize
Output Voltage Pure Sine Wave Optimal Efficiency
Output Frequency 90% Charge Control 5-16 VDC
Output Waveform 9-17 VDC Output Voltage 125A
Efficiency (Peak) 400 ADC Output Current Remote Battery Sensor
DC Input Voltage Range Normal Mode:25W, Change Temperature Compensation
Maximum Continuous DC Input Current Sleep Mode: <5W
Split Phase In/Dual Out, ADDITIONAL SPECIFICATIONS -20˚C to 60˚C
No Load Power Consumption Dual In/ Dual Out Temperature (Over 60˚C output derates)
Humidity
AC Connections 16ms 0 to 95% RH non condensing
2 legs at 50A each (240V split-phase)
TRANFER RELAY SPECIFICATIONS Dimensions (L x W x H) 12.6” x 8.07” x 13.7”
321 x 205 x 349 mm
Transfer Time
Transfer Relay Rating Net Weight 49.8 lbs (22.6 kg)
Regulatory and Safety Specifications
UL certified to 458 & 1741 (with
Specifications subject to change without notice. Marine Supplement) and to CSA
© 2018 Go Power! Doc: SPEC_GP-IC-3000_RevB 22.2 No. 107.1-01 FCC Path 15,
Class B

gpelectric.com | 866.247.6527 | [email protected]

THE POWER OF AN INVERTER

Your inverter charger is rated in watts. Most of your electrical appliances also have a wattage rating. This value helps you select
the right size of inverter. The chosen model of inverter should meet the largest load you wish to run.
The chart below estimates the wattage required to run a single appliance. To run multiple appliances simultaneously, choose an
inverter that matches the wattage of the combined items.

*B/C

150 - 300W 400-1000W 1100 - 3000W

GP-SW150
GP-SW300
GP-SW600

GP-SW1000 (can surge to 3000 watts) i
GP-HS1500 (can surge to 6000 watts) i
GP-SW1500 i
GP-SW2000 i
GP-IC-3000
GP-SW3000 MONITOR and CONTROL your
inverter charger.
*B/C = Battery Charging
Review individual product specs for actual wattage requirements

i = Ideal for high voltage alternators

PROTECT yourself and
your equipment.

Fuse and Cable Kits Inverter Charger Remote Model # GP-ICR-50

Go Power! Fuse and cable kits include everything you need The remote features a digital display and menu that offers
to safely connect the Go Power! Inverter Charger to your simple operation, while providing detailed operational data
batteries. The Installation kit includes 10’ large gauge battery about your inverter charger.
cables, tie downs, lugs and the appropriate inverter fuse
(class T fuse) and mounting block. • Easy-to-read, 4 line digital display panel
• Change settings and modes of operation
12 VOLT Inverter Size • View real-time status of battery charging activity,
GP-DC-KIT 4 2000-2500W
GP-DC-KIT 5 2600-3000W inverter AC input and inverter status
• Monitor inverter/charger health and temperature
• 50 ft cable included
• 3 year warranty

© 2018 Go Power! Doc: SPEC_GP-IC-3000_RevB gpelectric.com | 866.247.6527 | [email protected]

INVERTER REMOTES

REMOTELY POWER APPLICANCES OR ELECTRONICS

GP-HD-R GP-HD-R
GP-SWR-A
The Go Power! Remote can be used for the modified GP-1750HD and GP-3000HD
inverters. It features an LED indicator showing inverter status, ON/OFF switch and
25’ of cable that plugs into the inverter.The GP-HD-R can be used with our 800w,
1000w, 1750w, 3000w, and 5000w HD Inverters.

GP-SWR-A

The compact and economical GP-SWR-A remote features an LED indicator showing
inverter status, ON/OFF switch and 25’ of cable. This remote can be used with our
12-volt GP-ISW700, GP-ISW1000, GP-ISW1500, GPISW2000 and GP-ISW3000
inverters.

GP-ISW-R-12

The new GP-ISW-R remote includes LED indicator, ON/OFF switch and 25’ of cable,
with the additional Power Save feature. This remote can be used with our 12-volt GP-
ISW700, GP-ISW1000, GP-ISW1500, GPISW2000 and GP-ISW3000 inverters.

GP-ISW-R-24

The new compact GP-SWR-A remote features an LED indicator showing inverter
status, ON/OFF switch and 25’ of cable. This remote can be used with our 24-volt
GP-ISW700, GP-ISW1000, GP-ISW1500, GPISW2000 and GP-ISW3000 inverters.

GP-ISW-R

SPECIFICATIONS* GP-HD-R GP-SWR-A GP-ISW-R-12 (12V) GP-ISW-R-24 (24V)
55 x 28 x 73 98 x 85 x 25.6 98 x 85 x 25.6
Dimension (LxWxH) mm 50 x 14 x 80 2.2 x 1.1 x 2.9
0.1 / 0.05 3.58 x 3.34 x 1.01 3.58 x 3.34 x 1.01
inches 2 x 0.5 x 3.2 0.8 / 0.36 0.8 / 0.36
2 years 2 years 2 years
Weight (kg/lbs) 0.55 / 0.25

Warranty 2 years

*Specifications subject to change without notice

© 2017 Go Power! Doc: SPEC_GP-INVERTER-REMOTES_vD gpelectric.com | 866.247.6527 | [email protected]

INDUSTRIAL

PURE SINE WAVE
INVERTER

Premium Certified Pure Sine Wave Inverters (2000 - 3000 watts)

GP-ISW3000 GP-ISW2000 / GP-ISW3000

Premium mobile power in a sleek, lightweight profile.
Bring reliable, cUL-certified power on the road with
Go Power!’s Industrial Pure Sine Wave Inverter.

• Premium DC to AC pure sine wave power
• Wide voltage range
• Durable, low profile design
• Powersave mode
• Two GFCI-equipped outlets (2000W model only)
• Hardwire connection (3000W model only)
• Full overload protection
• 2 year warranty

GP-ISW2000

UL 458 Part 15, Note: both 12 V and 24 V inverter specifications are listed below.
Class A
SPECIFICATIONS*
GP-ISW2000 GP-ISW3000

Continuous Output Power 2000 W (VA) 3000 W (VA) AC Output Side
Maximum Surge Rating
Output Waveform 3500 W (VA) 6000 W (VA) B
Output Voltage Range ± 3% E
Pure Sine Wave
Input Voltage C
100 - 120 VAC (Dip Switch Selectable) A
Efficiency
12 V: 10.5 - 16.5 VDC
No Load Current Draw / Powersave
24 V: 21 - 33 VDC
Input Protection
Output Protection 12 V: 92% 12 V: 90%
Low Battery Alarm ± 0.3V
(± 0.5 V for 24 V inverters) 24 V: 93% 24 V: 91%
Low Battery Shutdown ± 0.3V
(± 0.5 V for 24 V inverters) 12 V: ≤ 1.8 A / < 0.1 A 12 V: ≤ 3.8 A / < 0.4 A
Operating Temperature Range
Storage Temperature Range 24 V: ≤ 1.0 A / < 0.05 A 24 V: ≤ 2.0 A / < 0.2 A
Cooling
AC Output Connections Over/Under Voltage, Reverse Polarity (Fused)
Remote Power Option
Short Circuit, Overload, Over/Under Temperature

12 V: 10.5 V
24 V: 21 V
12 V: 10.5 V
24 V: 21 V

-4˚F - 104˚F (-20˚C - 40˚C)

-22˚F - 158˚F (-30˚C - 40˚C)

Temperature and Load Controller Cooling Fan

Dual GFCI Outlet Hardwire

Yes DC Input Side

Dimensions (L x W x H) 17.45” x 9.76” x 3.27” 17.40” x 10.04” x 6.22” D
(443mm x 248mm x 83mm) (442mm x 255mm x 158mm)

Weight 11.55 lbs (5.24 kg) 18.08 lbs (8.2 kg) MODEL ABCDE
Warranty
2 Years
Inverter Install Kits
12 V: GP-DC-KIT4 12 V: GP-DC-KIT5 GP-ISW2000 17.44” 4.06” 7.72” 9.76” 0.28”
Remotes (Optional) 24 V: GP-DC-KIT3 24 V: GP-DC-KIT3 (443mm) (103mm) (196mm) (248mm) (7.0mm)
Regulations and Safety
GP-ISW-R / GP-SWR-A
*Specifications subject to change without notice
UL 458, FCC Part 15 Class A GP-ISW3000 17.40” 4.06” 7.72” 10.04” 0.28”
(442mm) (103mm) (196mm) (255mm) (7.0mm)

© 2018 Go Power! Doc: SPEC_GP-ISW2000_3000_RevC gpelectric.com | 866.247.6527 | [email protected]

INDUSTRIAL

PURE SINE WAVE
INVERTER

How to determine WHAT SIZE OF INVERTER to use

Your inverter charger is rated in watts. Most of your electrical appliances also have a wattage rating. This value helps you select the
right size of inverter. The chosen model of inverter should meet the largest load you wish to run.
The chart below estimates the wattage required to run a single appliance. To run multiple appliances simultaneously, choose an
inverter that matches the wattage of the combined items.

*B/C

150 - 300 W 400 - 1000 W 1100 - 3000 W

GP-SW150 i
GP-SW300 i
GP-ISW700 i
GP-ISW1000
GP-ISW1500 Remotely turn your inverter on/off
GP-ISW2000 and SAVE BATTERY POWER.
GP-ISW3000

*B/C = Battery Charging
Review individual product specs for actual wattage requirements

i = Ideal for high voltage alternators

PROTECT yourself and
your equipment.

Fuse and Cable Kits

Go Power! DC installation kits include everything you need to GP-ISW-R-12/24 GP-SWR-A
properly connect your Go Power! inverter to the batteries safely.
The kit includes 10’ large gauge battery cables, tie downs, lugs
and the appropriate inverter fuse (class T fuse) and mounting

block.

12 VOLT Inverter Size 24 VOLT Inverter Size Inverter Remote

GP-DC-KIT 2 600-1000 W GP-DC-KIT 2 600-1800 W Remotely power appliances or electronics with the
compact Go Power! inverter remote. The remote
GP-DC-KIT 3 1100-1800 W GP-DC-KIT 3 2000-3000 W features an LED indicator showing inverter status, an
ON/OFF switch and 25’ of cable.
GP-DC-KIT 4 2000-2500 W GP-DC-KIT 4 3100-4000 W

GP-DC-KIT 5 2600-3000 W GP-DC-KIT 5 4100-6000 W

© 2018 Go Power! Doc: SPEC_GP-ISW2000_3000_RevC gpelectric.com | 866.247.6527 | [email protected]

INDUSTRIAL

PURE SINE WAVE
INVERTER

Premium Certified Pure Sine Wave Inverters (700 - 1500 watts)

GP-ISW700 / GP-ISW1000 / GP-ISW1500

Premium mobile power in a sleek, lightweight
profile. Bring reliable, cUL-certified power on the
road with Go Power!’s Industrial Pure Sine Wave
Inverter.

GP-ISW700 • Produces an exact replica of AC power for
GP-ISW1000 optimal performance

• Runs any device in wattage range without
interference

• Durable, low profile design
• Powersave mode
• Dual GFCI outlets
• Wide voltage range
• Full overload protection
• 2 year warranty

UL 458 Part 15, GP-ISW1500
Class B

Note: both 12 V and 24 V inverter specifications are listed below.

SPECIFICATIONS* GP-ISW700 GP-ISW1000 GP-ISW1500

Continuous Output Power 700 W (VA) 1000 W (VA) 1500 W (VA) GP-ISW1500
Maximum Surge Rating 1230 W (VA) 1750 W (VA) 2650 W (VA)
Output Waveform Pure Sine Wave AC Output Side
AC Output Side

Output Voltage Range ± 3% 100 - 120 VAC (Dip Switch Selectable) B GP-ISW700/1000

Input Voltage 12 V: 10.5 - 16.5 VDC AC Output Side E B AC Output Side
24 V: 21 - 33 VDC
Efficiency 12 V: 91% 12 V: 91% B E
24 V: 93% 12 V: 92% 24 V: 92% E
No Load Current Draw / Powersave 24 V: 93% CB
12 V: ≤ 1.5 A / < 0.1 A 12 V: ≤ 1.8 A / < 0.1 A A AC
Input Protection 24 V: ≤ 0.8 A / < 0.06 A 12 V: ≤ 1.5 A / < 0.1 A 24 V: ≤ 1.0 A / < 0.05 A
Output Protection 24 V: ≤ 0.8 A / < 0.06 A AC E
Low Battery Alarm ± 0.3 V
(± 0.5 V for 24 V inverters) Over/Under Voltage, Reverse Polarity (Fused) C
Low Battery Shutdown ± 0.3 V A
(± 0.5 V for 24 V inverters) Short Circuit, Overload, Over/Under Temperature
DC Input Side
12 V: 10.5 V
24 V: 21 V D

12 V: 10.5 V
24 V: 21 V

Operating Temperature Range -4˚ F - 104˚ F (-20˚ C - 40˚ C) DC Input Side DC Input Side
Storage Temperature Range -22˚ F - 158˚ F (-30˚ C - 40˚ C)
Cooling Temperature and Load Controller Cooling Fan D D

AC Output Connections Dual GFCI Outlet MODEL A B C D EDC Input Side
Remote Power Option Yes 13.00” 3.15” 5.20” 7.87”D 0.28”

Dimensions (L x W x H) 13.00” x 7.87” x 3.27” 14.65” x 7.87” x 3.27” 16.59” x 9.76” x 3.27” GP-ISW700 (330 mm) (80 mm) (132 mm) (200 mm) (7 mm)

(330 mm x 200 mm x 83 mm) (372 mm x 200 mm x 83 mm) (421 mm x 248 mm x 83 mm)

Weight 5.73 lbs (2.6 kg) 7.19 lbs (3.26 kg) 9.13 lbs (4.14 kg) GP-ISW1000 14.65” 2.72” 7.72” 7.87” 0.28”
Warranty 2 Years GP-ISW1500 (372 mm) (69 mm) (196 mm) (200 mm) (7 mm)
12 V: GP-DC-KIT3
Inverter Install Kits GP-DC-KIT2 24 V: GP-DC-KIT2 16.57” 3.62” 7.72” 9.76” 0.28”
(421 mm) (92 mm) (196 mm) (248 mm) (7 mm)
Remotes (Optional) GP-ISW-R / GP-SWR-A
Regulations and Safety UL 458, FCC Part 15 Class B
*Specifications subject to change without notice

© 2018 Go Power! Doc: SPEC_GP-ISW700-1000-1500_RevB gpelectric.com | 866.247.6527 | [email protected]

INDUSTRIAL

PURE SINE WAVE
INVERTER

How to determine WHAT SIZE OF INVERTER to use

Your inverter is rated in watts. Most of your electrical appliances also have a wattage rating. This value helps you select the right size
of inverter. The chosen model of inverter should meet the largest load you wish to run.
The chart below estimates the wattage required to run a single appliance. To run multiple appliances simultaneously, choose an
inverter that matches the wattage of the combined items.

*B/C

150 - 300 W 400 - 1000 W 1100 - 3000 W

GP-SW150 i
GP-SW300 i
GP-ISW700 i
GP-ISW1000
GP-ISW1500 Remotely turn your inverter on/off
GP-ISW2000 and SAVE BATTERY POWER.
GP-ISW3000

*B/C = Battery Charging
Review individual product specs for actual wattage requirements

i = Ideal for high voltage alternators

PROTECT yourself and
your equipment.

Fuse and Cable Kits

Go Power! DC installation kits include everything you need to GP-ISW-R-12/24 GP-SWR-A
properly connect your Go Power! inverter to the batteries safely.
The kit includes 10’ large gauge battery cables, tie downs, lugs,
and the appropriate inverter fuse (class T fuse) and mounting

block.

12 VOLT Inverter Size 24 VOLT Inverter Size Inverter Remote

GP-DC-KIT 2 600-1000 W GP-DC-KIT 2 600-1800 W Remotely power appliances or electronics with the
GP-DC-KIT 3 1100-1800 W GP-DC-KIT 3 2000-3000 W compact Go Power! inverter remote. The remote
features an LED indicator showing inverter status, an
GP-DC-KIT 4 2000-2500 W GP-DC-KIT 4 3100-4000 W ON/OFF switch, and 25’ of cable.
GP-DC-KIT 5 2600-3000 W GP-DC-KIT 5 4100-6000 W

© 2018 Go Power! Doc: SPEC_GP-ISW700-1000-1500_RevB gpelectric.com | 866.247.6527 | [email protected]

10 Amp MPPT
Solar Controller

INCREASES BATTERY LIFE BY PREVENTING OVERCHARGING

SPECIFICATIONS 12/24V (auto detection) Provides Superior Battery Protection
Nominal System Voltage 10A
Max. Solar Array Current A Solar Controller is an essential component of your
photovoltaic (PV) system. The Controller maintains the
Battery Voltage Range 9V - 15.5V life of the battery by protecting it from overcharging.
When your battery has reached a 100% state of charge,
Max. Solar panel Input Voltage 30V (12V systems), 50V (24V systems) the Controller prevents overcharging by limiting the
Operating Consumption <10mA
The GP-MPPT-50/10 is a 12/24 volt surface mounted
Temp. Compensation -4.2mV/K per 2V cell photovoltaic (PV) charge controller rated for a continuous
solar current input of 10 amps.
Operating Temperature -40 to 122ºF (-40 to 50ºC)
•
Dimensions (H x W x D) 4.96 x 5.00 x 1.50 in (126 x 127 x 38 mm) your batteries

Weight 11.2 oz (320 grams) • 3-stage I/U curve sweep algorithm increases battery
lifespan
Max. Wire Gauge #6 AWG
• Maximum Power Point Tracking technology can
Warranty 2 years contribute up to a 30% boost in energy output from
solar modules
Protection PV Short Circuit, PV Reverse Current (at
night), PV Over Voltage, Over temperature, • Temperature-compensated charging for Sealed/Gel,
Over Current AGM and Flooded batteries

Charge voltages shown are at 77°F / 25°C. The total rated Maximum Power Current (Imp) • Built-in USB charge port
of the PV input should not exceed 10 amps. • Heavy-duty terminals for low resistance connections
• 2-year warranty
BATTERY SETTINGS
Float Charge AUTHORIZED DEALER:
Main Charge (30 minutes per day)
13.8V / 27.6V
Boost Charge (2 hours, when battery 14.4V / 28.8V
voltage < 12.3/24.6V) 14.4V / 28.8V

Equalize Charge Voltage 14.8V / 29.6V
(at least every 30 days or after battery
voltage < 12.1V)

“Go Power!” and the Go Power! logo are trademarks gpelectric.com | 866.247.6527 | [email protected]

© 2017 Go Power!, Document: SPEC_GP-MPPT-50-10_RevB

20 Amp MPPT
Solar Controller

INCREASES BATTERY LIFE BY PREVENTING OVERCHARGING

Maximum efficiency solar charge controller
built for harsh industrial environments

The GP-MPPT-85/20 ensures maximum performance
and yield from all types of PV systems year-round and
in any environment.

The GP-MPPT-85/20 is an industrial Maximum Power
Point Tracking (MPPT) charge controller featuring a robust,
fully-sealed (IP68) housing that resists vibration as well as
dust-, insect- and water ingress.

SPECIFICATIONS 12V/24V • IP68 rated waterproof protection with MC4 solar
Nominal System Voltage 20A connections and Delphi battery connections
Max Solar Array Current 9V – 15.5V (12V system), 18 – 31V (24V system)
Battery Voltage Range 85V • Up to 98% power conversion efficiency
Max. Solar panel input voltage <10 mA • 3-stage I/U curve sweep algorithm increases
Operating Consumption -25mV / K (12V systems), -50mV/K (24V
Temp. Compensation -40 to 60ºC battery lifespan
Operating Temperature 99% N.C. • Anodized aluminum extrusion with built-in
Humidity 88.5 x 112 x 41.4 mm
Dimensions (H x W x D): 360g (1.38 lbs) heat dissipation
Weight 5 years • Fully encapsulated design prevents damage from
Warranty
Battery Reverse Polarity, Solar Array Reverse water, corrosion, insects and/or dust
Protection Polarity, Over temperature, Over Current, PV • Works with 12 or 24V battery systems (automatic
Short Circuit,Battery Short Circuit,Over Current
battery voltage detection)
• Compatible with 60-cell modules
• Converts excess array voltage into additional

charging current
• Allows up to 50% oversized array power for adding

additional capacity in low-insolation months
• 5 year warranty

BATTERY CHARGING PROFILE SEALED/GEL AGM FLOODED
14.4V
Bulk Charge Voltage Set Point 14.1V 14.4V 14.4V AUTHORIZED DEALER:
Absorption Charge Voltage (30 min /
14.1V 14.4V 14.4V
Max. Power Boost Charge Voltage:
Automatic (2h if V < 12.3V) 14.1V 14.4V

Max. Power Boost Charge Voltage: 14.4V 14.4V 14.4V
Manual (2h if activated) 13.8V 13.8V 13.8V
Float Charge Voltage Disabled
Disabled 14.8V
Equalize Charge Voltage
(2h / 28 days or after V < 12.1V)

Specifications may be subject to change. Product may not be exactly as shown. gpelectric.com | 1.866.247.6527 | [email protected]
Specifications subject to local environmental conditions.

© 2018 Go Power! Doc: SPEC_GP-MPPT-85-20_revA

40 Amp MPPT
Solar Controller

INCREASES BATTERY LIFE BY PREVENTING OVERCHARGING

Provides Superior Battery Protection

A Solar Controller is an essential component of your
photovoltaic (PV) system. The Controller maintains the life
of the battery by protecting it from overcharging. When
your battery has reached a 100% state of charge, the
Controller prevents overcharging by limiting the current
flowing into the batteries from your solar array.

The GP-PWM-40 optimizes solar charging capacity in
mobile systems in all sun and tilt conditions while allowing
the use of simpler series wiring configurations up to 150V
(Voc @ STC).

SPECIFICATIONS 12V/24V • Stack up to two MPPT-40 controllers for twice the
Nominal System Voltage 40A array capacity and even more flexibility
Max Solar Array Current 9V -- 31V
Battery Voltage Range 28V • Charges 12/24V Batteries with higher voltage arrays
Max. Solar panel input voltage 6mA • Accepts Series wired PV inputs up to 150 Voc (STC)
Operating Consumption 15mA • Easier to wire arrays in series configurations
Display Consumption -24mV/K (12V systems), - 48mV/K (24V systems) • Heavy-duty terminals for low resistance connections
Temp. Compensation 14 to 131ºF / - 10 to 55ºC • Maximizes energy yield in any insolation/array tilt
Operating Temperature 99% N.C.
Humidity 149 x 98 x 33 mm 5.87 x 3.86 x 1.30 conditions
Dimensions (H x W x D): 7.76 oz; 220 g; • Innovative current-mode control reacts faster to
#2 AWG
Weight changes in sun conditions than competition
Maximum Wire Gauge: 5 years • Increases charge output on flat mounted arrays

Warranty compared to PMW controllers
• Inverter on/off control for select Go Power! inverters
Protection Battery Reverse Polarity, Solar Array Reverse • RoHS compliant, environmentally safe
Polarity, Over temperature, Over Current, PV • Three battery charging profiles
Short Circuit,Battery Short Circuit,Over Current • Up to 98% power conversion efficiency
• 5 year warranty
Use a non-inverting Ethernet cable. GP-MPPT-R is intended for use with non-inverting Ethernet
cables. Use the one provided, or be sure to purchase a non-inverting type. Use with GP- AUTHORIZED DEALER:
MPPT-40 Solar Controller

BATTERY CHARGING PROFILE SEALED/GEL AGM FLOODED
14.4V
Bulk Charge Voltage Set Point 14.1V 14.4V 14.4V
Absorption Charge Voltage (30 min / 14.4V
14.1V 14.4V
Max. Power Boost Charge Voltage: 14.4V
Automatic (2h if V < 12.3V) 14.1V 14.4V 13.7V

Max. Power Boost Charge Voltage: 14.1V 14.4V
Manual (2h if activated) 13.7V 13.7V
Float Charge Voltage

Equalize Charge Voltage Disabled Disabled 14.9V
(2h / 28 days or after V < 12.1V)

Specifications may be subject to change. Product may not be exactly as shown.
Specifications subject to local environmental conditions.

© 2018 Go Power! Doc: SPEC_GP-MPPT-40_revA gpelectric.com | 1.866.247.6527 | [email protected]

GP-PC-10/20 Amp

Potted Solar Controller

AN ECONOMICAL, INDUSTRIAL SOLAR CONTROLLER

*GP-PC-20 shown above Provides Superior Battery Protection

SPECIFICATIONS GP-PC-10-IP68 GP-PC-20-IP68 A Solar Controller is an essential component of your
Nominal System Voltage photovoltaic (PV) system. The Controller maintains the
Max Solar Array Current 12/24V (Auto Detection) life of the battery by protecting it from overcharging.
When your battery has reached a 100% state of charge,
Battery Voltage Range 10A 20A the Controller prevents overcharging by limiting the
current flowing into the batteries from your solar array.
Max. Solar Panel Input Voltage 12V System: 10.5- 15.5 The GP-PC Series potted controllers feature a weather
24V System: 21V - 31V resistant enclosure and provide an economical solution
Max Peak Solar Panel Wattage for industrial applications. These controllers are available
12V System: 30V in a 10A or 20A version and automatically detect
Operating Consumption 24V System: 50V between 12 and 24 volt battery banks.

Temp. Compensation 12V System: 175W 12V System: 350W • Regulates current flow from your solar modules
24V System: 350W 24V System: 700W to your batteries
Operating Temperature
Humidity 4mA • Temperature compensated pulse width
Dimensions (H x W x D): modulation (PWM) charging
Weight 12V System: -13mV/ºF (-24mV/ºC)
Maximum Wire Gauge: 24V System: -26mV/ºF (-48mV/ºC) • Works with the following lead acid batteries:
Warranty Gel, AGM and Flooded
Protection - 40 to 140ºF (- 40 to 60ºC)
Certifications 99% N.C. • 3 stage charging: Main, Boost and Float
• Easy to read LED status indicators which report:
Safety Features 3.94 x 2.4 x 0.79 in (100 x 61 x 20 mm)
5.6 oz (160 grams) Charge Status, Battery SOC and Load Status
#8 AWG • Industrial IP68 rated potted enclosure with
5 year
IP21terminals
IP68 (Enclosure), IP21 (Terminals) • Meets UL 1741, CSA 22.2 NO. 107.1-01
CE, RoHS, UL1741, CSA 22.2 No. 107.1-01 • 5 year warranty

Battery Reverse Polarity, Solar Array Reverse AUTHORIZED DEALER:
Polarity, Over Temperature, Over Current
gpelectric.com | 1.866.247.6527 | [email protected]
Charge voltages shown are at 77°F / 25°C. The total rated Maximum Power Current (Imp)
of the PV input should not exceed 10 amps for the GP-PC-10 or 20 amps for the GP-PC-20.
Specifications may be subject to change. Product may not be exactly as shown.
Specifications subject to local environmental conditions.

© 2017 Go Power! Doc: SPEC_GP-PC-Series_revD

PORT BLE

SOLAR KITS

A GREAT SOLAR SUPPLEMENT TO ANY EXISTING SOLAR KIT / SYSTEM OR AS AN
INDIVIDUAL, INSTALLATION-FREE BATTERY CHARGER.

GP-PSK-200 GP-PSK-200 / GP-PSK-130 / GP-PSK-90

Adjustable The rugged durability of our solar panels guarantee you’ll
folding legs generate solar power everywhere you go. Our Portable
Solar Kits allow you to park in the shade while your kit sits
in the sun to charge your batteries.

The Portable Solar Kits are ideal for campers, pop-up trail-
ers and boats and will connect to a SAE-style solar port
pre-wired on a RV.

Each kit features adjustable folding legs, 15’ of cable,
battery clamps, quick connect cable and a heavy duty
carrying case.

• Sets up in minutes - simply unfold and connect battery
clamps to battery

• Place in the sun, park in the shade, includes 12‘ of
cable

• Built-in 10A PWM solar controller prevents batteries
from overcharging

• Maintenance free and no installation or mounting
required

• Folds into carrying case for easy transport
• 25 year solar panel warranty

GP-PSK-130 GP-PSK-90 Carrying case

Accessories included:

.

Solar controller Battery clamps Ring terminals Quick-connect SAE solar XLR-style
cables plug adapter solar plug

© 2018 Go Power! Doc: SPEC_GP-PSK_Series_RevF gpelectric.com | 866.247.6527 | [email protected]

PORTABLE SOLAR KIT SPECIFICATIONS

SPECIFICATIONS* GP-PSK-200 GP-PSK-130 GP-PSK-90

Output Power 200W 130W 90W
6.7A 4.6A
Rated Current 11.4A 19.7V 19.8V
32.48 x 19.88 x 2.76 21.65 x 19.88 x 2.36
Rated Voltage 21.1V 32.48 x 39.76 x 1.38 21.65 x 39.76 x 1.18
Dimensions of panel folded closed (inches) 39 x 26.4 x 5.6 15 kg (33 lbs) 9 kg (19.8 lbs)

Dimensions of panel open (inches) 39 x 52.8 x 2.8

Weight of kit 18 kg (40 lbs)

*Specifications subject to change without notice

Accessories (sold separately): Connectivity: Compatible with pre-wired RVs

GP-PSK-X30 GP-PSK-7PIN .
(30’ extension cable) (7 pin trailer adapter)

SAE solar Connects to SAE solar ports.
plug adapter

Kits include 12' XLR-style Connects to XLR-style solar
solar cable with solar plug ports.
anderson-style
connector gpelectric.com | 866.247.6527 | [email protected]

© 2018 Go Power! Doc: SPEC_GP-PSK_Series_RevF

GP-PV-100M

SOLAR MODULE

Reliable GP-PV-100M SOLAR MODULE

The GP-PV-100M Solar Module from Go Power! is a
high-efficiency monocrystalline solar module that
provides outstanding performance and cost-effective
solar power for high-end off-grid and mobile applications.
The Go Power! GP-PV-100M Solar Module is built to last
and features a 25-year limited power output warranty.

Durable

To ensure long life, the high-efficiency solar cells are
encapsulated between a special tempered, low-iron solar
glass and a Tedlar®/polyester backing material. The
mounting frame, manufactured from anodized
marine-grade aluminum, allows the GP-PV-100M to be
installed in extreme conditions.



The GP-PV-100M is ideal for:
• RV/Marine
• 12/24 Volt battery systems
• OEM
• Security Trailers
• Telecommunications
• Stand-alone or grid connected applications
• Signaling systems
• Remote telemetry
• Water pumping
• Other off-grid applications

Features: REPRESENTED IN YOUR REGION BY:

• Compact and rugged design
• Plug and play junction box
• Lightweight anodized aluminum frame
• High transmissivity tempered glass
• Industry standard quick-connect cables (MC4) work

in series or in parallel
• 25 year limited power output warranty

CCCaaarrmrmmaaannnaaaGhhhoTTeTPeecochchwhnnnoeoolrlo!olog|ggigieeipessesCClCeoocorrptrprp.i.c.||.|cccacoaarmrmrmmaa|annTnaaeahhleh..ccp.ocohommomn|e||T:TeT1eel.le8elep6pph6hho.o2onn4nee7e::.:1611.5.22.25575000.|.33.38E880m00..0a0.00i0l05:552i2n2|f|o|E@EEmmmgaapaiileli::l:ieinnicnfftoforo@i@[email protected]

GP-PV-100M

SOLAR MODULE

21.46 in
545 mm

SPECIFICATIONS 100W MC4 Negative
Rated power (Pm) 18.4V
Maximum power voltage (Vmp) 5.43A 47.09 in
Maximum power current (Imp) 22.6V 1196 mm
Open circuit voltage (Voc)
Short circuit current (Isc) 5.75A MC4 Positive
Power coefficient –0.43% / °C MC4 Connectors
Voltage coefficient
Current coefficient –0.33% / °C Front Profile
Max power tolerance
Cell type 0.045% / °C 1.38 in
Module efficiency +/- 3% 35 mm
Series fuse rating Monocrystalline
Maximum system voltage 15.34%
Weight 10A
1000VDC
Dimensions 17.6 lb (8 kg)
47.09 x 21.46 x 1.30 in
Frame type / material 1196 x 545 x 33 mm
Clear anodized aluminum
Power Specifications calculated at STC: frame
• Irradiance: 1000 W/m2
• Cell Temperature: 77 °F (25 °C)
• Air Mass: 1.5

IV CURVE PARAMETERS

23.46 in 2φ- 4
596 mm Grounding holes

4-9×14
Mounting holes

Back Profile Side Profile

Specifications subject to local environmental conditions. © 2017, Go Power! by Valterra Power
Specifications may be subject to change. Document: SPEC_GP-PV-100M_RevA-v2

Go PowerC!a(Armwhaonllya-ohwnTeedcshubnsoidliaorygoief VsalCteorrarpPr.o|duccatsr,mLLCa.)n|aghp.ceolemctr|icT.ecloempho|nTee:le1p.2h5o0n.e3:810..806065.224|7E.6m5a2i7l:|inEfom@aicl:[email protected]

GP-PV-10M

SOLAR MODULE

Reliable GP-PV-10M SOLAR MODULE
The GP-PV-10M Solar Module from Go Power! is a Features:
high-efficiency monocrystalline solar module that • Compact and rugged design
provides outstanding performance and cost-effective • Dual positive + negative bare wire connectors
solar power for off-grid and mobile applications. The • Lightweight anodized aluminum frame
Go Power! GP-PV-10M Solar Module is built to last and • High transmissivity tempered glass
features a 10-year limited power output warranty. • 7m cable with built-in fuse
• Junction box with bypass and blocking diodes
Durable • 10 year limited power output warranty
To ensure long life, the high-efficiency solar cells are
encapsulated between a special tempered, low-iron so- REPRESENTED IN YOUR REGION BY:
lar glass and a Tedlar® / polyester backing material. The
mounting frame, manufactured from anodized marine-
grade aluminum, allows the GP-PV-10M to be installed
in extreme conditions.



The GP-PV-10M is ideal for:
• RV/Marine
• 12/24 Volt battery systems
• OEM
• Security Trailers
• Telecommunications
• Water pumping
• Other off-grid applications

Carmanah TeGcohnPoloowgieesr!Co(Arpw. h|oclalyr-mowanneadhs.ucbosmidia|ryTeolfeVpahltoernrea:P1ro.d2u5c0ts.3, L8L0C..0) 0|5g2p|eElemcatilr:[email protected]

GP-PV-10M

SOLAR MODULE

SPECIFICATIONS 10W 9.25 in 3.31 in 0.98 in
Rated power (Pm) 17.5V 235 mm 84 mm 25 mm
Maximum power voltage (Vmp) 0.57A 8.15 in Side profile
Maximum power current (Imp) 21V 207 mm 6.50 in
Open circuit voltage (Voc) 165 mm
0.62A 4 - Ø7x11mm 13.19 in
Short circuit current (Isc) Monocrystalline mounting holes 335 mm
Cell type 17.30%
Module efficiency 600VDC Rear profile
Maximum system voltage 1.76 lb (0.8 kg)
Weight
13.19 x 9.25 x 0.98 in
Dimensions 335 x 235 x 25 mm
Clear anodized aluminum
Frame type / material frame

Power Specifications calculated at STC:
• Irradiance: 1000 W/m2
• Cell Temperature: 77 °F (25 °C)
• Air Mass: 1.5

Specifications subject to local environmental conditions. © 2018, Go Power!
Specifications may be subject to change. Document: SPEC_GP-PV-10M_RevA.v1

Carmanah TeGcohnPoloowgieesr!Co(Arpw. h|oclalyr-mowanneadhs.ucbosmidia|ryTeolfeVpahltoernrea:P1ro.d2u5c0ts.3, L8L0C..0) 0|5g2p|eElemcatilr:[email protected]

GP-PV-170M

SOLAR MODULE

Reliable GP-PV-170M SOLAR MODULE
The GP-PV-170M Solar Module from Go Power!
is a high-efficiency monocrystalline solar module The management system governing the manufacture
that provides outstanding performance and cost- of this product is ISO 90001:2008 certified.
effective solar power for high-end off-grid and mobile
applications. The Go Power! GP-PV-170M solar module REPRESENTED IN YOUR REGION BY:
is built to last and features a 25-year limited power
output warranty.

Durable
To ensure long life, the high-efficiency solar cells are
encapsulated between a special tempered, low-iron
solar glass and a Tedlar®/polyester backing material. The
mounting frame, manufactured from anodized marine-
grade aluminum, allows the GP-PV-170M to be installed
in extreme conditions.



The GP-PV-170M is ideal for:
• RV/Marine
• 12/24 Volt battery systems
• OEM
• Security Trailers
• Telecommunications
• Stand-alone or grid connected applications
• Signaling systems
• Remote telemetry
• Water pumping
• Other off-grid applications

Features:
• Compact and rugged design
• Plug and play junction box
• Lightweight anodized aluminum frame
• High transmissivity tempered glass
• Industry standard quick-connect cables

(MC4) work in series or in parallel
• 25 year limited power output warranty

Go PowerC!a(Armwhaonllya-ohwnTeedcshubnsoidliaorygoief VsalCteorrarpPr.o|duccatsr,mLLCa.)n|aghp.ceolemctr|icT.ecloempho|nTee:le1p.2h5o0n.e3:810..806065.224|7E.6m5a2i7l:|inEfom@aicl:[email protected]

GP-PV-170M

SOLAR MODULE

SPECIFICATIONS 170W 59.06 in 26.30 in MC4 Negative
Rated power (Pm) 19.35V 1500 mm 668 mm
Maximum power voltage (Vmp) 8.79A 59.06 in 26.30 in MC4 Positive
Maximum power current (Imp) 22.78V 1500 mm 668 mm MC4 Connectors
Open circuit voltage (Voc)
9.32A 0.34 in Front Profile 1.58 in
Short circuit current (Isc) –0.39% / °C 8.6 mm 25.12 in 40 mm
Power coefficient (x8) 638 mm 1.58 in
Voltage coefficient –0.31% / °C 0.34 in 25.12 in 40 mm
Current coefficient 8.6 mm 638 mm
Max power tolerance 0.045% / °C (x8) 1.18 in
Cell type +/- 5W 36.25 in 11.28 in Back Profile 30 mm
Module efficiency Monocrystalline 920.8 mm 286.5 mm 1.18 in
Series fuse rating 16.4% 36.25 in 11.28 in 30 mm
Maximum system voltage 15A 920.8 mm 286.5 mm
Weight 1000VDC (UL / IEC) Side Profile
26.4 lb (12 kg)
Dimensions 59.1 x 26.3 x 1.58 in
1500 x 668 x 40 mm
Frame type / material Clear anodized aluminum
frame
Power Specifications calculated at STC:
• Irradiance: 1000 W/m2
• Cell Temperature: 77 °F (25 °C)
• Air Mass: 1.5

IV CURVE PARAMETERS

Current, A 9
8
7 5 15 1020 1525 2030 2535 3040 35 40
6
5
4
3
2
1
5 0 0 10

Voltage, V Voltage, V

1000 W/m2 1000 W/m2

800 W/m 2 800 W/m 2
600 W/m 2 600 W/m 2

Specifications subject to local environmental conditions. © 2017, Go Power!
Specifications may be subject to change. Document: SPEC_GP-PV-170M_RevA

Go PowerC!a(Armwhaonllya-ohwnTeedcshubnsoidliaorygoief VsalCteorrarpPr.o|duccatsr,mLLCa.)n|aghp.ceolemctr|icT.ecloempho|nTee:le1p.2h5o0n.e3:810..806065.224|7E.6m5a2i7l:|inEfom@aicl:[email protected]

GP-PV-190M

SOLAR MODULE

Reliable
The GP-PV-190M Solar Module from Go Power!
is a high-efficiency monocrystalline solar module
that provides outstanding performance and cost-
effective solar power for high-end off-grid and mobile
applications. The Go Power! GP-PV-190M solar module
is built to last and features a 25-year limited power
output warranty.

Durable GP-PV-190M SOLAR MODULE
To ensure long life, the high-efficiency solar cells are
encapsulated between a special tempered, low-iron The management system governing the manufacture
solar glass and a Tedlar®/polyester backing material. The of this product is ISO 90001:2008 certified.
mounting frame, manufactured from anodized marine-
grade aluminum, allows the GP-PV-190M to be installed REPRESENTED IN YOUR REGION BY:
in extreme conditions.



The GP-PV-190M is ideal for:
• RV/Marine
• 12/24 Volt battery systems
• OEM
• Security Trailers
• Telecommunications
• Stand-alone or grid connected applications
• Signaling systems
• Remote telemetry
• Water pumping
• Other off-grid applications

Features:
• Compact and rugged design
• Plug and play junction box
• Lightweight anodized aluminum frame
• High transmissivity tempered glass
• Industry standard quick-connect cables

(MC4) work in series or in parallel
• 25 year limited power output warranty

CarmanahGToechPnoowlogeier!s C(Aorwph.o|lclya-ormwnaendahsu.cbosmidia|ryTeolfeVpahltoenrrea:P1r.o2d5u0c.t3s,8L0L.C0.0) 5|2g|pEemleaicl:[email protected]