GP-PV-190M
SOLAR MODULE
SPECIFICATIONS 190W 59.06 in 26.30 in MC4 Negative
Rated power (Pm) 20.4V 1500 mm 668 mm
Maximum power voltage (Vmp) 9.3A 59.06 in 26.30 in MC4 Positive
Maximum power current (Imp) 24.09V 1500 mm 668 mm MC4 Connectors
Open circuit voltage (Voc)
9.98A 0.34 in Front Profile 1.58 in
Short circuit current (Isc) –0.39% / °C 8.6 mm 25.12 in 40 mm
Power coefficient (x8) 638 mm 1.58 in
Voltage coefficient –0.31% / °C 0.34 in 25.12 in 40 mm
Current coefficient 8.6 mm 638 mm
Max power tolerance 0.045% / °C (x8) 1.18 in
Cell type +/- 5W 36.25 in 11.28 in Back Profile 30 mm
Module efficiency Monocrystalline 920.8 mm 286.5 mm 1.18 in
Series fuse rating 16.4% 36.25 in 11.28 in 30 mm
Maximum system voltage 15A 920.8 mm 286.5 mm
Weight 600VDC (UL / IEC) Side Profile
26.4 lb (12 kg)
Dimensions 59.1 x 26.3 x 1.58 in
1500 x 668 x 40 mm
Frame type / material Clear anodized aluminum
frame
Power Specifications calculated at STC:
• Irradiance: 1000 W/m2
• Cell Temperature: 77 °F (25 °C)
• Air Mass: 1.5
IV CURVE PARAMETERS
Current, A 9
8
7 5 15 1020 1525 2030 2535 3040 35 40
6
5
4
3
2
1
5 0 0 10
Voltage, V Voltage, V
1000 W/m2 1000 W/m2
800 W/m 2 800 W/m 2
600 W/m 2 600 W/m 2
Specifications subject to local environmental conditions. © 2018, Go Power!
Specifications may be subject to change. Document: SPEC_GP-PV-190M_RevA.v4
CarmanahGToechPnoowlogeier!s C(Aorwph.o|lclya-ormwnaendahsu.cbosmidia|ryTeolfeVpahltoenrrea:P1r.o2d5u0c.t3s,8L0L.C0.0) 5|2g|pEemleaicl:[email protected]
GP-PV-20M
SOLAR MODULE
Reliable GP-PV-20M SOLAR MODULE
The GP-PV-20M Solar Module from Go Power! is a Features:
high-efficiency monocrystalline solar module that • Compact and rugged design
provides outstanding performance and cost-effective • Dual positive + negative bare wire connectors
solar power for off-grid and mobile applications. The • Lightweight anodized aluminum frame
Go Power! GP-PV-20M Solar Module is built to last and • High transmissivity tempered glass
features a 10-year limited power output warranty. • 7m cable with built-in fuse
• Junction box with bypass and blocking diodes
Durable • 10 year limited power output warranty
To ensure long life, the high-efficiency solar cells are
encapsulated between a special tempered, low-iron so- REPRESENTED IN YOUR REGION BY:
lar glass and a Tedlar® / polyester backing material. The
mounting frame, manufactured from anodized marine-
grade aluminum, allows the GP-PV-20M to be installed
in extreme conditions.
The GP-PV-20M is ideal for:
• RV/Marine
• 12/24 Volt battery systems
• OEM
• Security Trailers
• Telecommunications
• Water pumping
• Other off-grid applications
Carmanah TeGcohnPoloowgieesr!Co(Arpw. h|oclalyr-mowanneadhs.ucbosmidia|ryTeolfeVpahltoernrea:P1ro.d2u5c0ts.3, L8L0C..0) 0|5g2p|eElemcatilr:[email protected]
GP-PV-20M
SOLAR MODULE
SPECIFICATIONS 20W 13.58 in 4.60 in 0.98 in
Rated power (Pm) 17.5V 345 mm 117 mm 25 mm
Maximum power voltage (Vmp) 1.14A 12.56 in Side profile
Maximum power current (Imp) 21.6V 319 mm 9.25 in
Open circuit voltage (Voc) 235 mm
1.21A 4 - Ø7x11mm 18.50 in
Short circuit current (Isc) Monocrystalline mounting holes 470 mm
Cell type 17.30%
Module efficiency 600VDC Rear profile
Maximum system voltage 3.97 lb (1.8 kg)
Weight
13.58 x 18.50 x 0.98 in
Dimensions 345 x 470 x 25 mm
Clear anodized aluminum
Frame type / material frame
Power Specifications calculated at STC:
• Irradiance: 1000 W/m2
• Cell Temperature: 77 °F (25 °C)
• Air Mass: 1.5
Specifications subject to local environmental conditions. © 2018, Go Power!
Specifications may be subject to change. Document: SPEC_GP-PV-20M_RevA.v1
Carmanah TeGcohnPoloowgieesr!Co(Arpw. h|oclalyr-mowanneadhs.ucbosmidia|ryTeolfeVpahltoernrea:P1ro.d2u5c0ts.3, L8L0C..0) 0|5g2p|eElemcatilr:[email protected]
GP-PV-220M
SOLAR MODULE
Reliable GP-PV-220M SOLAR MODULE
The GP-PV-220M Solar Module from Go Power! is a
Monocrystalline module that provides a cost-effective
solar power for off-grid and mobile applications. The Go
Power! GP-PV-220M Solar Module is built to last and
features a 25-year limited power output warranty.
Durable
To ensure long life, the high-efficiency solar cells are
encapsulated between a special tempered, low-iron solar
glass and a Tedlar®/polyester backing material. The
mounting frame, manufactured from anodized
marine-grade aluminum, allows the GP-PV-220M to be
installed in extreme conditions.
The GP-PV-220M is ideal for:
• 12-Volt battery systems
• Larger RVs
• Cabin kits and off-grid living
• Security Trailers
• Telecommunications
• Stand-alone or grid connected applications
• Signaling systems
• Remote telemetry
• Water pumping
• Other off-grid applications
Features: EXCLUSIVE TO
• Reliable; made to UL and IEC standards
• Lightweight anodized aluminum frame
• High transmissivity tempered glass
• Industry standard quick-connect cables (MC4) work
in series or in parallel
• 25 year limited power output warranty
CCCaaarrmrmmaaannnaaaGhhhoTTeTPeecochchwhnnnoeoolrlo!olog|ggigieeipessesCClCeoocorrptrprp.i.c.||.|cccacoaarmrmrmmaa|annTnaaeahhleh..ccp.ocohommomn|e||T:TeT1eel.le8elep6pph6hho.o2onn4nee7e::.:1611.5.22.25575000.|.33.38E880m00..0a0.00i0l05:552i2n2|f|o|E@EEmmmgaapaiileli::l:ieinnicnfftoforo@i@[email protected]
GP-PV-220M
SOLAR MODULE
SPECIFICATIONS 220W DIMENSIONS Front Profile 1.97 in
Rated power (Pm) 18.36V 53.43 in 39.37 in 50 mm
Maximum power voltage (Vmp) 12.23A 1357 mm 1000 mm
Maximum power current (Imp) 21.91V 0.5 x 0.
Open circuit voltage (Voc) 0.5 x 0.33 in 393.73.799inin 12.7 x 8.
13.3A 12.7 x 8.5 mm 1090605mmmm
Short circuit current (Isc) –0.42% / °C MC4 Negative
Power coefficient CM 35.47 in
Voltage coefficient –0.31% / °C 901 mm
Current coefficient Back Profile
Max power tolerance 0.033% / °C MC4 Positive
Cell type +2% MC4 Connectors
Module efficiency Monocrystalline
Maximum system voltage %
Weight 1000VDC
44.1 lb (20 kg)
Dimensions 53.42 x 39.87 x 1.97“
1357 X 1000 X 50 mm
Frame type / material Anodized aluminum/
Silver
Certifications 39.37 in Tested to1.U97L i1n703 / IEC 1.97 in
1000 mm 61215 / IE50Cm6m1730 CE 50 mm
Power Specifications calculated at STC: 0.5 x 0
• Irradiance: 1000 W/m2 12.7 x 8
• Cell Temperature: 77 °F (25 °C)
• Air Mass: 1.5 35.47 in 53.4234i.n41 in 35.47 in
901 mm 13576m20mmm 901 mm
IV CURVE PARAMETERS
CM 1.18 in
20.0 30 mm
53.43 in Side Profile
1357 mm
15.0
Current, A 10.0
5.0
5 100.0 15 20 25 30 35 40
0.0 Vo5l.t0age, V 10.0 15.0 20.0 25.0 30.0
1000 W/m2 Voltage, V
800 W/m 2
600 W/m 2
Specifications subject to local environmental conditions. © 2018, Go Power!
Specifications may be subject to change. Document: SPEC_GP-PV-220M_RevA
CarmanaGhoTePcohwnoelro!g|igepseCleocrptr.ic| .ccaormma|nTaehle.cpohmon|eT: e1l.e8p6h6o.2n4e7:.16.522570.|38E0m.0a0il5: 2in|foE@mgapile:[email protected]
GP-PV-270M
SOLAR MODULE
Reliable GP-PV-270M SOLAR
The GP-PV-270M Solar Module from Go Power! is a
Monocrystalline module that provides a cost-effective
solar power for off-grid and mobile applications. The Go
Power! GP-PV-270M Solar Module is built to last and
features a 25-year limited power output warranty.
Durable
To ensure long life, the high-efficiency solar cells are
encapsulated between a special tempered, low-iron solar
glass and a Tedlar®/polyester backing material. The
mounting frame, manufactured from anodized
marine-grade aluminum, allows the GP-PV-270M to be
installed in extreme conditions.
The GP-PV-270M is ideal for:
• 24 Volt battery systems
• Cabin kits and off-grid living
• Security Trailers
• Telecommunications
• Stand-alone or grid connected applications
• Signaling systems
• Remote telemetry
• Water pumping
• Other off-grid applications
Features: REPRESENTED IN YOUR REGION BY:
• Canadian made
• Reliable; made to UL and IEC standards
• Plug and play junction box
• Lightweight anodized aluminum frame
• High transmissivity tempered glass
• Industry standard quick-connect cables (MC4) work
in series or in parallel
• 25 year limited power output warranty
CCCaaarrmrmmaaannnaaaGhhhoTTeTPeecochchwhnnnoeoolrlo!olog|ggigieeipessesCClCeoocorrptrprp.i.c.||.|cccacoaarmrmrmmaa|annTnaaeahhleh..ccp.ocohommomn|e||T:TeT1eel.le8elep6pph6hho.o2onn4nee7e::.:1611.5.22.25575000.|.33.38E880m00..0a0.00i0l05:552i2n2|f|o|E@EEmmmgaapaiileli::l:ieinnicnfftoforo@i@[email protected]
GP-PV-270M
SOLAR MODULE
DIMENSIONS
992mm
SPECIFICATIONS 270W 74mm 35mm
Rated power (Pm) 29.75V 251mm
Maximum power voltage (Vmp) 9.07A DRAINAGE
Maximum power current (Imp) 37.20V 70mm HOLES
Open circuit voltage (Voc)
Short circuit current (Isc) 10.25A 820mm 3.5mm X 8mm
Power coefficient –0.42% / °C 250mm
Voltage coefficient MOUNTING
Current coefficient –0.31% / °C HOLES
Max power tolerance
Cell type 0.033% / °C 9mm X 14mm
Module efficiency +/- 3%
Maximum system voltage Monocrystalline GROUND 1640mm
Weight 16.60% HOLES
1000VDC
Dimensions 44.1 lb (20 kg) 5mm
64.57 x 39.05 x 1.37“
Frame type / material 1640 X 992 X 35 mm 1640mm MOUNTING
Anodized aluminum/ HOLES
Certifications Silver 250mm
Tested to UL 1703 / IEC 820mm 9mm X 14mm
Power Specifications calculated at STC: 61215 / IEC 61730 CE
• Irradiance: 1000 W/m2 251mm70mm DRAINAGE
• Cell Temperature: 77 °F (25 °C) 74mm HOLES
• Air Mass: 1.5
3.5mm X 8mm
IV CURVE PARAMETERS
Corner Connection
CONNECTIONS
GMA-270M / I - V CURVES
Current (A) 10 5 °C
9 "25 °C"
8 "45 °C"
7 "65 °C"
6
5 MC4 Negative MC4 Positive
4
3 04 06 0 MC4 Connectors
2 Voltage (V)
1
0
02
Specifications subject to local environmental conditions. © 2018, Go Power!
Specifications may be subject to change. Document: SPEC_GP-PV-270M_RevA
CarmanaGhoTePcohwnoelro!g|igepseCleocrptr.ic| .ccaormma|nTaehle.cpohmon|eT: e1l.e8p6h6o.2n4e7:.16.522570.|38E0m.0a0il5: 2in|foE@mgapile:[email protected]
GP-PV-80M
SOLAR MODULE
Reliable
The GP-PV-80M Solar Module from Go Power! is a
high-efficiency monocrystalline solar module that
provides outstanding performance and cost-effective
solar power for high-end off-grid and mobile application.
The Go Power! GP-PV-80M Solar Module is built to last
and features a 25-year limited power output warranty.
Durable
To ensure long life, the high-efficiency solar cells are
encapsulated between a special tempered, low-iron
solar glass and a Tedlar®/polyester backing material.
The mounting frame, manufactured from anodized
marine-grade aluminum, allows the GP-PV-80M to be
installed in extreme conditions.
GP-PV-80M SOLAR MODULE
The GP-PV-80M is ideal for: The management system governing the manufacture
• RV/Marine of this product is ISO 90001:2008 certified.
• 12/24 Volt battery systems
• OEM REPRESENTED IN YOUR REGION BY:
• Security Trailers
• Telecommunications
• Stand-alone or grid connected applications
• Signaling systems
• Remote telemetry
• Water pumping
• Other off-grid applications
Features:
• Compact and rugged design
• Plug and play junction box
• Lightweight anodized aluminum frame
• High transmissivity tempered glass
• Industry standard quick-connect cables
(MC4) work in series or in parallel
• 25 year limited power output warranty
Carmanah TeGcohnPoloowgieesr!Co(Arpw. h|oclalyr-mowanneadhs.ucbosmidia|ryTeolfeVpahltoernrea:P1ro.d2u5c0ts.3, L8L0C..0) 0|5g2p|eElemcatilr:[email protected]
GP-PV-80M
SOLAR MODULE
SPECIFICATIONS 80W 26.46 in 1.38 in
Rated power (Pm) 18.4V 672 mm 35 mm
Maximum power voltage (Vmp) 4.35A MC4 Negative
Maximum power current (Imp) 22.8V
Open circuit voltage (Voc) 30.71 in
Short circuit current (Isc) 4.60A 780 mm
Max power tolerance ±3%
Cell type Monocrystalline MC4 Positive
Module efficiency 15.9% MC4 Connectors
Series fuse rating 10A
Maximum system voltage 1000VDC Front Profile
Weight 13.2 lb (6 kg)
30.71 x 26.46 x 1.38 in
Dimensions 780 x 672 x 35 mm
Clear anodized aluminum
Frame type / material frame
Power Specifications calculated at STC: 1.38 in 2265..4162inin 1.38 in
• Irradiance: 1000 W/m2 35 mm 667328mmmm 35 mm
• Cell Temperature: 77 °F (25 °C)
• Air Mass: 1.5 .34 in
8.6 mm
26.46 in (x8)
672 mm
IV CURVE PARAMETERS
n 25.31 in 3101..7218iinn
m4 643 mm 278860.5mmmm
Current (A) 3 Back Profile
2 1.38 in
35 mm
1
Side Profile
0 5 10 15 20 25
Voltage (V)
Specifications subject to local environmental conditions. © 2018, Go Power!
Specifications may be subject to change. Document: SPEC_GP-PV-80M_RevA.v1
Carmanah TeGcohnPoloowgieesr!Co(Arpw. h|oclalyr-mowanneadhs.ucbosmidia|ryTeolfeVpahltoernrea:P1ro.d2u5c0ts.3, L8L0C..0) 0|5g2p|eElemcatilr:[email protected]
10 Amp Digital
Solar Controller
INCREASES BATTERY LIFE BY PREVENTING OVERCHARGING
SPECIFICATIONS 12V Provides Superior Battery Protection
Nominal System Voltage 10A
Max Solar Array Current 6V -- 15.5V A Solar Controller is an essential component of your
Battery Voltage Range 25V photovoltaic (PV) system. The Controller maintains the life
Max. Solar panel input voltage -13mV/ºF / - 24mV/ºC of the battery by protecting it from overcharging. When
Temp. Compensation - 13 to 122ºF / - 25 to 50ºC your battery has reached a 100% state of charge, the
Operating Temperature 100% N.C. Controller prevents the overcharging by limiting the current
Humidity 4.02 x 5.12 x 1.08 in; 102 x 130 x 27 mm
Dimensions (H x W x D): 5.34 oz; 151 grams owing into the batteries from your solar array.
Weight #6 AWG
Maximum Wire Gauge: The GP-PWM-10 is a 12 volt wall mounted photovoltaic
Warranty 1 year (PV) charge controller rated for a continuous solar current
input of 10 amps. The GP-PWM-10 uses pulse width
Protection Battery Reverse Polarity, Solar Array Reverse modulation technology and a unique four stage charging
Polarity, Over temperature, Over Current system and optional equalize setting to charge and protect
your battery bank. The GP-PWM-10 features an LCD digital
Charge voltages shown are at 77°F / 25°C. The total rated Maximum Power Current (Imp) display and LED indicators that show solar array charge
of the PV input should not exceed 10 amps. current, system battery voltage and battery capacity.
This charger is ideal for use with our Solar Flex 30 module,
our 20 watt Trickle Charger Module and our SUN lmTM 15
watt Solar Charger.
• Pulse Width Modulation Charging
• 3 Battery Charging pro les: Gel, AGM and
Flooded
• 4 Stage Charging: Bulk, Float, Absorption and
Equalize
• Monthly Equalize option
• LCD display shows Charging Current, Battery
Voltage
• LED indicator shows Battery State of Charge
• Reverse Polarity protected
• Accepts up to 160 watts of solar at 12 volts
AUTHORIZED DEALER:
BATTERY SETTINGS SEALED/ AGM FLOODED
GEL 14.4V 14.7V
Bulk Charge Voltage Set Point 14.1V
Absorption Charge Voltage (30 min / day) 14.4V 14.7V
Automatic boost charge applied for 2hr if 14.1V
battery voltage drops below 12.3V 13.6V 13.6V
Float Charge Voltage 13.6V 15.5V 15.5V
Equalize Charge Voltage 15.5V
(2h / 28 days or after V < 12.1V)
© 2018 Go Power! Doc: SPEC_GP-PWM-10_revF gpelectric.com | 1.866.247.6527 | [email protected]
10 Amp Flush-Mounted
Solar Controller
INCREASES BATTERY LIFE BY PREVENTING OVERCHARGING
Provides Superior Battery Protection
A Solar Controller is an essential component of your
photovoltaic (PV) system. The Controller maintains the
life of the battery by protecting it from overcharging.
When your battery has reached a 100% state of charge,
the Controller prevents overcharging by limiting the
current flowing into the batteries from your solar array.
The GP-PWM-10-FM is a 12 volt flush mounted
photovoltaic (PV) charge controller rated for a continuous
solar current input of 10 amps.
SPECIFICATIONS 12V • Regulates current flow from your solar modules to
Nominal System Voltage 10A your batteries
Max Solar Array Current 6V -- 15.5V
Battery Voltage Range 28V • Temperature compensated pulse width modulation
Max. Solar panel input voltage 6mA (PWM) charging
Operating Consumption 15mA
Display Consumption -13mV/ºF / - 24mV/ºC • 3 Battery charging profiles: Sealed/Gel, AGM and
Temp. Compensation - 40 to 185ºF / - 40 to 85ºC Flooded
Operating Temperature 99% N.C.
Humidity • 4 stage charging: Bulk, Absorption, Float and
5.87 x 3.86 x 1.26 in; 149 x 98 x 32 mm Equalize
Dimensions (H x W x D):
• Automatic Maximum Power Boost Technology™
Weight 9.2 oz; 260 grams • Back lit LCD digital screen displays charging current,
Maximum Wire Gauge: #4 AWG
battery voltage and battery state of charge, and
Warranty 5 year hours since last reset
• Built-in USB charge port
Protection Battery Reverse Polarity, Solar Array Reverse • Heavy-duty terminals for low resistance connections
Polarity, Over temperature, Over Current • Suitable for 12V solar systems up to 170 watts, or 10
amps
Charge voltages shown are at 77°F / 25°C. The total rated Maximum Power Current (Imp) • 5 year warranty
of the PV input should not exceed 10 amps.
AUTHORIZED DEALER:
BATTERY SETTINGS SEALED/ AGM FLOODED
GEL 14.4V 14.4V
Bulk Charge Voltage Set Point 14.1V
Absorption Charge Voltage (30 min / day) 14.4V 14.4V
Automatic boost charge applied for 2hr if 14.1V
battery voltage drops below 12.3V 13.7V 13.7V
Float Charge Voltage 13.7V Disabled 14.9V
Equalize Charge Voltage Disabled
(2h / 28 days or after V < 12.1V)
Specifications may be subject to change. Product may not be exactly as shown. gpelectric.com | 1.866.247.6527 | [email protected]
Specifications subject to local environmental conditions.
© 2017 Go Power! Doc: SPEC_GP-PWM-10_revE
10 Amp Digital
Solar Controller
INCREASES BATTERY LIFE BY PREVENTING OVERCHARGING
Economical Battery Protection
A Solar Controller is an essential component of your
photovoltaic (PV) system. The Controller maintains the
life of the battery by protecting it from overcharging.
When your battery has reached a 100% state of charge,
the Controller prevents overcharging by limiting the
current flowing into the batteries from your solar array.
The GP-PWM-10-SQ is a 12 volt surface mounted
photovoltaic (PV) charge controller rated for a continuous
solar current input of 10 amps.
SPECIFICATIONS 12V • Regulates current flow from your solar modules to
Nominal System Voltage 10A your batteries
Max Solar Array Current 6V -- 15.5V
Battery Voltage Range 25V • Temperature compensated pulse width modulation
Max. Solar panel input voltage 6mA (PWM) charging
Operating Consumption 10mA
Display Consumption -24mV/ºF / cell*K • 3 Battery charging profiles: Sealed/Gel, AGM, and
Temp. Compensation - 13 to 122ºF / - 20 to 50ºC Wet
Operating Temperature 100% N.C.
Humidity • 4 stage charging: Bulk, Absorption, Float and
4.02 x 5.12 x 1.06 in; 102 x 130 x 27 mm Equalize
Dimensions (H x W x D):
• Back lit LCD digital screen displays charging current,
Weight 5.34 oz; 151 grams battery voltage and battery state of charge
Maximum Wire Gauge: #6 AWG
• Suitable for 12V solar systems up to 170 watts, or 10
Warranty 1 year amps
Protection Battery Reverse Polarity, Solar Array Reverse • 1-year warranty
Polarity, Over temperature, Over Current
AUTHORIZED DEALER:
Charge voltages shown are at 77°F / 25°C. The total rated Maximum Power Current (Imp)
of the PV input should not exceed 10 amps.
BATTERY SETTINGS SEALED/ AGM WET
GEL
Absorption Charge Voltage (1-2 hrs / day) 14.4V 14.7V
Automatic boost charge applied for 2hr if 14.1V 13.7V 13.7V
battery voltage drops below 12.3V N/A 15.5V
Float Charge Voltage 13.7V
Equalize Charge Voltage N/A
(2h / 28 days or after V < 12.1V)
Specifications may be subject to change. Product may not be exactly as shown. gpelectric.com | 1.866.247.6527 | [email protected]
Specifications subject to local environmental conditions.
© 2017 Go Power! Doc: SPEC_GP-PWM-10-SQ_revA
30 Amp Digital
Solar Controller
INCREASES BATTERY LIFE BY PREVENTING OVERCHARGING
Provides Superior Battery Protection
A Solar Controller is an essential component of your
photovoltaic (PV) system. The Controller maintains the life
of the battery by protecting it from overcharging. When
your battery has reached a 100% state of charge, the
Controller prevents overcharging by limiting the current
flowing into the batteries from your solar array.
The GP-PWM-30 is a 12 volt flush mounted photovoltaic
(PV) charge controller rated for a continuous solar current
input of 30 amps and is capable of dual bank charging.
SPECIFICATIONS 12V • Regulates current flow from your solar modules to
Nominal System Voltage 30A your batteries
Max Solar Array Current 6V -- 15.5V
Battery Voltage Range 28V • Temperature compensated pulse width modulation
Max. Solar panel input voltage 6mA (PWM) charging
Operating Consumption 10mA
Display Consumption -13mV/ºF / - 24mV/ºC • 3 Battery charging profiles: Sealed/Gel, AGM and
Temp. Compensation - 40 to 185ºF / - 40 to 85ºC Flooded
Operating Temperature 99% N.C.
Humidity • 4 stage charging: Bulk, Absorption, Float and Equalize
4.25 x 7.48 x 1.38 in; 108 x 190 x 35 mm • Maximum Power Boost Technology™ for manual bulk
Dimensions (H x W x D):
charge at any stage of the charge cycle
Weight 10.6 oz; 300 g; • Dual-bank battery charging
Maximum Wire Gauge: #4 AWG • On-off control for the following Go Power! Inverters:
Warranty 5 years GP-ISW700, GP-ISW1000, GP-ISW1500, GP-
ISW2000, GP-ISW3000, and GP-ISW1500TS
Protection Battery Reverse Polarity, Solar Array Reverse • Back lit LCD screen displays charging current, battery
Polarity, Over temperature, Over Current voltage and battery state of charge
• Built-in USB charge port
Charge voltages shown are at 77°F / 25°C. The total rated Maximum Power Current (Imp) • Heavy-duty terminals for low resistance connections
of the PV input should not exceed 30 amps. • Suitable for 12V solar systems up to 30 amps
BATTERY CHARGING PROFILE SEALED/GEL AGM FLOODED AUTHORIZED DEALER:
14.4V
Bulk Charge Voltage Set Point 14.1V 14.4V 14.4V
Absorption Charge Voltage (30 min / day) 14.4V
14.1V 14.4V
Max. Power Boost Charge Voltage: 14.4V
Automatic (2h if V < 12.3V) 14.1V 14.4V 13.7V
Max. Power Boost Charge Voltage: 14.1V 14.4V 14.9V
Manual (2h if activated) 13.7V 13.7V
Float Charge Voltage Disabled Disabled
Equalize Charge Voltage
(2h / 28 days or after V < 12.1V)
Specifications may be subject to change. Product may not be exactly as shown. gpelectric.com | 1.866.247.6527 | [email protected]
Specifications subject to local environmental conditions.
© 2017 Go Power! Doc: SPEC_GP-PWM-30_revG
30 Amp Digital
Solar Controller
INCREASES BATTERY LIFE BY PREVENTING OVERCHARGING
SPECIFICATIONS 12V Economical Battery Protection
Nominal System Voltage 30A
Max Solar Array Current 6V -- 15.5V A Solar Controller is an essential component of your
Battery Voltage Range 25V photovoltaic (PV) system. The Controller maintains the life
Max. Solar panel input voltage 6mA of the battery by protecting it from overcharging. When
Operating Consumption 10mA your battery has reached a 100% state of charge, the
Display Consumption -24mV/ºF / cell*K Controller prevents overcharging by limiting the current
Temp. Compensation - 13 to 122ºF / - 20 to 50ºC flowing into the batteries from your solar array.
Operating Temperature 100% N.C.
Humidity The GP-PWM-30-SQ is a 12 volt flush mounted
6.14 x 4.08 x 1.50 in; 156 x 122 x 38 mm photovoltaic (PV) charge controller rated for a continuous
Dimensions (H x W x D): solar current input of 30 amps and is capable of dual bank
charging.
Weight 5.34 oz; 151 g;
Maximum Wire Gauge: #6 AWG • Regulates current flow from your solar modules to
your batteries
Warranty 1 year
• Temperature compensated pulse width modulation
Protection Battery Reverse Polarity, Solar Array Reverse (PWM) charging
Polarity, Over temperature, Over Current
• 4 Battery charging profiles
Charge voltages shown are at 77°F / 25°C. The total rated Maximum Power Current (Imp) • 4 stage charging: Bulk, Absorption, Float and Equalize
of the PV input should not exceed 30 amps. • Dual-bank battery charging
• On-off control for the following Go Power! Inverters:
BATTERY CHARGING PROFILE SEALED/GEL AGM FLOODED
Bulk Charge Voltage Set Point 14.1V 14.4V 14.7V GP-SW1000, GP-HS-1500, GP-SW2000, GP-SW3000
Absorption Charge Voltage (1-2 hr / day) 14.1V 14.4V 14.4V • Back lit LCD screen displays charging current, battery
Float Charge Voltage 13.6V 13.6V 13.6V
voltage and battery state of charge
Equalize Charge Voltage 15.5V • Suitable for 12V solar systems up to 488 watts
(2h / 28 days or after V < 12.1V) • 1 year warranty
AUTHORIZED DEALER:
Disabled Disabled
Specifications may be subject to change. Product may not be exactly as shown. gpelectric.com | 1.866.247.6527 | [email protected]
Specifications subject to local environmental conditions.
© 2017 Go Power! Doc: SPEC_GP-PWM-30-SQ_revA
® PURE
SINE WAVE
powered by INVERTER
MID-SIZED PURE sine wave inverters (1000 - 1500 watts)
GP-SW1500 GP-SW1000 GP-SW1500 / GP-SW1000 / GP-HS1500
Go Power! Pure Sine Wave Inverters are the ultimate
choice for appliances and devices that demand a clean,
pure source of AC power. The GP-SW1000, SW1500
and HS1500 will run practically everything in your RV,
work truck or cottage and still have pure power for the
sensitive loads. All feature a duplex GFCI receptacle and
full overload protection. The GP-HS1500 is a high surge
inverter, surging at 3000 watts.
• Premium DC pure sine wave power
• Powersave mode
• Innovative, compact design
• Two GFCI-equipped outlets, full overload protection
• Option to hardwire inverter to aload center
• 2 year warranty
GP-HS1500
SPECIFICATIONS* GP-SW1000-12 GP-SW1000-24 GP-SW1500-12 GP-SW1500-24 GP-HS1500 GP-HS1500
(12V) (24V) (12V) (24V) (12V) (24V)
Continuous Output Power 1000W 1000 W 1500 W 1500 W 1500 W 1500 W
Surge Rating
Output Waveform 2000 W 2000 W 2000 W 2000 W 3000 W 3000 W
Output Voltage ± 3%
Input Voltage Pure Sine Wave <3% THD Pure Sine Wave <3% THD Pure Sine Wave <3% THD
Efficiency
No Load Current Draw / 110 VAC RMS 110 VAC RMS 110 VAC RMS
Powersave
Protection 10.5 - 15 VDC 21.0 - 30.0 VDC 11.0 - 16.0 VDC 21.0 - 30.0 VDC 10.5 - 15 VDC 21.0 - 30.0 VDC
Low Battery Alarm ± 2%
85 - 92% 85 - 92 % 85 - 90% 85 - 90% 88 - 91%
1.4 A / 0.25 A 0.75 A / 0.15 A 1.0 A / 0.1 A 0.65 A / 0.05 A 1.45 A / 0.28 A 0.75 A / 0.15 A
Overload, Short Circuit, Reverse Polarity (Fuse), Over/Under Input Voltage, Over Temperature
10.5 V 21.0 V 10.5 V 21.0 V 10.7 V 21.4 V
Low Battery Shut-Down ± 2% 10.0 V 20.0 V 10.0 V 20.0 V 10.3 V 20.6 V
Operating Temp. Range 0 - 40ºC / 32ºF - 104ºF 0 - 40ºC / 32ºF - 104ºF 0 - 40ºC / 32ºF - 104ºF
Storage Temp. Range -30ºC - 70ºC / -22ºF - 158ºF -30ºC - 70ºC / -22ºF - 158ºF -30ºC - 70ºC / -22ºF - 158ºF
Cooling Thermostatically Controlled Fan Thermostatically Controlled Fan Thermostatically Controlled Fan
AC Receptacle
Remote Port Option Dual GFCI Dual GFCI Dual GFCI Dual GFCI Dual GFCI Dual GFCI
(L x W x H) in mm
(L x W x H) in inches Yes Yes Yes Yes Yes Yes
Weight
Warranty 383 x 182 x 89 383 x 182 x 89 419 x 279 x 102 419 x 279 x 102 370 x 191 x 88 370 x 191 x 88
Inverter Install Kits
15.1 x 7.2 x 3.5 15.1 x 7.2 x 3.5 16.3 x 10.9 x 4.1 16.3 x 10.9 x 4.1 14.6 x 7.5 x 3.5 14.6 x 7.5 x 3.5
4.0 kg / 8.8 lbs 4.0 kg / 8.8 lbs 7.7 kg / 17 lbs 7.7 kg / 17 lbs 4.8 kg / 10.6 lbs 4.8 kg / 10.6 lbs
2 Years 2 Years 2 Years 2 Years 2 Years 2 Years
GP-DC-KIT2 GP-DC-KIT2 GP-DC-KIT3 GP-DC-KIT2 GP-DC-KIT3 GP-DC-KIT2
Remotes (Optional) GP-SWR-B-12 / GP-SWR-B-24 / GP-SW-REMOTE GP-SW-REMOTE GP-SWR-A GP-SWR-A
GP-SWR-A GP-SWR-A GP-SWR-B-12 GP-SWR-B-24
*Specifications subject to change without notice
© 2014 Carmanah Technologies Doc: SPEC_GP-SW1000-1500-HS1500_vB gpelectric.com | 866.247.6527 | [email protected]
® PURE
SINE WAVE
INVERTER
powered by
How to determine WHAT SIZE OF INVERTER to use
All inverters are rated in watts and most electrical appliances have a wattage rating.To determine the appropriate
inverter you must first identify your largest load. Use our online Calculator Tool to ensure the wattage rating of
the largest load is within the wattage rating of the inverter you select. This chart illustrates the approximate and
minimum inverter size to run a single appliance.
*B/C
GP-SW150
GP-SW300
GP-SW600
GP-SW1000 (can surge to 3000 watts)
GP-HS1500
GP-SW1500 i
i
GP-SW2000 i
GP-SW3000 Remotely turn your inverter on/off Plea
and SAVE BATTERY POWER. com
*B/C = Battery Charging
Review individual product specs for actual wattage requirements GP-SWR-B
i = Ideal for high voltage alternators
PROTECT yourself and
your equipment.
Inverter DC Install Kits Inverter Remotes
Go Power! DC Installation Kits include everything you need to Remotely power appliances or electronics with Go-Power!
properly connect your Go Power! Inverter to the batteries safely. Inverter Remotes. Four models are available for use with
The DC Installation Kit includes 10’ large gauge battery cables, Modified or Pure sine wave inverters.
tie downs, lugs and the appropriate inverter fuse (class T slow
blow fuse) and mounting block.
12 VOLT Inverter Size 24 VOLT Inverter Size
GP-DC-KIT 2 600-1000 W GP-DC-KIT 2 600-1800 W
GP-DC-KIT 3 1100-1800 W GP-DC-KIT 3 2000-3000 W
GP-DC-KIT 4 2000-2500 W GP-DC-KIT 4 3100-4000 W GP-REMOTE GP-SW-REMOTE GP-SWR-A
GP-DC-KIT 5 2600-3000 W GP-DC-KIT 5 4100-6000 W
© 2014 Carmanah Technologies Doc: SPEC_GP-SW1000-1500-HS1500_vB gpelectric.com | 866.247.6527 | [email protected]
PURE
SINE WAVE
INVERTER
SMALL PURE sine wave inverters (150 - 600 watts)
GP-SW150 GP-SW300 / GP-SW150
Premium mobile power in a sleek, lightweight profile.
Bring reliable power on the road with Go Power!’s most
ecanomical Pure Sine Wave Inverters.
• Two outlets (SW300 features GFCI for overload
protection)
• Innovative, compact design
• Powersave mode
• 2 year warranty
GP-SW300
GP-SW150-12 GP-SW150-24 GP-SW300-12 GP-SW300-24
(12V) (24V) (12V) (24V)
Continuous Output 150 W 150 W 300 W 300 W
Surge Rating
Output Waveform 260 W 260 W 450 W 450 W
Output Voltage ± 3%
Input Voltage Pure Sine Wave <3% THD Pure Sine Wave <3% THD
Efficiency
No Load Current 110 VAC RMS 110 VAC RMS 110 VAC RMS 110 VAC RMS
Protection
Low Battery Alarm 10.5 - 15 VDC 21.0 - 30.0 VDC 10.5 - 15 VDC 21.0 - 30.0 VDC
Low Battery Shut-
80 - 90% 80 - 90% 80 - 90% 80 - 90%
Operating Temp.
Storage Temp. 0.20 A 0.15 A 0.26 A 0.23 A
Cooling
AC Receptacle Overload, Short Circuit, Reverse Polarity (Fuse), Over/Under Input Voltage, Over Temperature -
Remote Port Option
(L x W x H) in mm 10.5 V 21.0 V 10.5 V 21.0 V
(L x W x H) in inches
Weight 10.0 V 20.0 V 10.0 V 20.0 V
Warranty
-20ºC - 40ºC / -4ºF - 104ºF -20ºC - 40ºC / -4ºF - 104ºF
Inverter Install Kits
-30ºC - 70ºC / -22ºF - 158ºF -30ºC - 70ºC / -22ºF - 158ºF
Thermostatically Controlled Fan Thermostatically Controlled Fan
Standard North American Dual GFCI Dual GFCI
Yes Yes Yes Yes
200 x 132 x 72 200 x 132 x 72 237 x 155 x 72 237 x 155 x 72
8 x 5.3 x 2.9 8 x 5.3 x 2.9 9.3 x 6.1 x 2.8 9.3 x 6.1 x 2.8
2.7 kg / 5.9 lbs 2.7 kg / 5.9 lbs 3.5 kg / 7.7 lbs 3.5 kg / 7.7 lbs
2 Years 2 Years 2 Years 2 Years
Auto utility adapter Battery ring terminal Anderson Lug Terminals
connection
*Specifications subject to change without notice
© 2017 Go Power! Doc: SPEC_GP-SW150-300_vB gpelectric.com | 866.247.6527 | [email protected]
PURE
SINE WAVE
INVERTER
How to determine WHAT SIZE OF INVERTER to use
Choosing the right inverter
All inverters are rated in watts and most electrical appliances have a wattage rating.To determine the appropriate inverter you must
first identify your largest load. Use our online Calculator Tool to ensure the wattage rating of the largest load is within the wattage
rating of the inverter you select. This chart illustrates the approximate and minimum inverter size to run a single appliance.
*B/C
GP-SW150
GP-SW300
GP-SW600
GP-SW1000 (can surge to 3000 watts)
GP-HS1500
GP-SW1500 i
i
GP-SW2000 i
GP-SW3000
*B/C = Battery Charging
Review individual product specs for actual wattage requirements
i = Ideal for high voltage alternators
PROTECT yourself and Inverter DC Install Kits
your equipment.
Go Power! DC Installation Kits include everything you need to
properly connect your Go Power! Inverter to the batteries safely.
The DC Installation Kit includes 10’ large gauge battery cables,
tie downs, lugs and the appropriate inverter fuse (class T slow
blow fuse) and mounting block.
12 VOLT Inverter Size 24 VOLT Inverter Size
GP-DC-KIT 2 600-1000 W GP-DC-KIT 2 600-1800 W
GP-DC-KIT 3 1100-1800 W GP-DC-KIT 3 2000-3000 W
GP-DC-KIT 4 2000-2500 W GP-DC-KIT 4 3100-4000 W
GP-DC-KIT 5 2600-3000 W GP-DC-KIT 5 4100-6000 W
© 2017 Go Power! Doc: SPEC_GP-SW150-300_vB gpelectric.com | 866.247.6527 | [email protected]
Smart Battery
Chargers
OUR SMART CONVERTERS CHARGE FASTER THAN CONVENTIONAL CHARGERS
(15-100 AMPS)
Go Power! Smart Battery Chargers
Go Power! Battery Chargers are compact, powerful battery chargers that offer
fast, accurate battery charging at a reasonable cost. Using state-of-the-art,
switch mode technology, Go Power! Battery Chargers are reliable, compact and
lightweight.
All models feature switchable output modes, one for float charging and one for
rapid charging, and a four-stage charger, with an automatic “equalization” stage
to periodically boost charge batteries. This is especially useful for batteries
which often sit idle for long periods.
• 4 stage battery charging built-in
• Additional “intelligent” charge adapter NOT required
• Thermostatically controlled fan
• Easy installation
• Fuse protection
• Lightweight design
• 45/75 amp charger included in the Go Power!
SOLAR ELITE / SOLAR EXTREME charging system
SPECIFICATIONS* GPC-35-MAX GPC-45-MAX GPC-55-MAX GPC-75-MAX GPC-100-MAX GPC-24-15 GPC-24-25
14.4V (DC) 14.4V (DC)
DC Output Voltage (No Load) 14.4V (DC) 14.4V (DC) 14.4V (DC) 27.2 V (DC) 27.2 V (DC)
approx + / - 0.7% + / - 0.7%
32 amps 45 amps + / - 0.7% + / - 0.7% + / - 0.7% + / - 0.5% + / - 0.5%
Output Voltage Tolerance (No
Load) 55 amps 75 amps 100 amps 15 amps 25 amps
Output Amperage, Max
Continuous >13.4V (DC) >13.4V (DC) >13.4V (DC) >27.0 V (DC) >27.0 V (DC)
Output Voltage (Full Load) approx >13.4V (DC) >13.4V (DC) 780 watts 1065 watts 1400 watts 400 watts 675 watts
105-135AC 105-135AC 105-135AC 108-132 AC 108-132 AC
Maximum Power Output, 430 watts 600 watts
Continuous 47-63 47-63 47-63 47-63 47-63
Input Voltage Range 105-135AC 105-135AC 12 amps 12 amps 17 amps 7 amps 12 amps
47-63 47-63 >80%
Input Voltage Frequency >85% >85% >85% 30 amps >80%
40 amps 40 amps 40 amps 40 amps
Maximum AC Current @ 108Vac 10 amps 10 amps Yes
Yes Yes Yes >100% Yes
Typical Efficiency >85% >85% >100% >100% >100% Proportional >100%
Proportional Proportional Proportional Proportional
Max Inrush Current, Single Cycle 40 amps 40 amps Yes
Yes Yes Yes 0 - 40Cº Yes
Short Circuit Protection Yes Yes 0-45C° 0-45C° 0-45C° 9.7 x 6.7 x 3.4” 0 - 40Cº
Overload Protection >100% >100% 12 x 9 x 5” 12 x 9 x 5” 12 x 9 x 5” 5.0lbs 9.7 x 6.7 x 3.4”
Fan Control Proportional Proportional 6.5 lbs 6.5 lbs 6.5 lbs 5.0lbs
Thermal Protection
Yes Yes
Working Temperature Range 0-45C° 0-45C°
Dimensions 12 x 9 x 5” 12 x 9 x 5”
7.0 lbs
Weight 7.0 lbs
* Specifications subject to change without notice
© 2017 Go Power! Doc: SPEC_GP_BATTERY_CHARGER_vD gpelectric.com | 866.247.6527 | [email protected]