DRAW-TITE 2017 Catalog

TOOL / TESTER INSTRUCTIONS

INSTRUCTIONS FOR TRAILER TESTER

TRAILER TESTER (PART #8010) CONTROL PANEL BRAKE Load Readout:
• Green LED 1 represents 1 axle
The Trailer Tester (Part #8010) is designed 4. CHARGING THE INTERNAL BATTERY • Green LED 2 represents 2 axles TECHNICAL
to help you quickly identify problems in the CAUTION • Green LED 3 represents 3 axles
wiring of the trailer such as opens, shorts, • Green LED 4 represents 4 axles
incorrect wiring, etc. This is done by test- ONLY USE THE CHARGER (part no. 8008)
ing the Left Turn, Right Turn, Tail/Marker, PROVIDED WITH THE 8010 TESTER NOTE: All current measurements are standard
Brake and Back Up circuits on the trailer, by • When the charger is plugged into the charger
indicating the approximate amount of current socket, Red LED 5 on the Power Row flashes if to RV.
used in each circuit. It will also test the volt- the unit is ON. 7. FAULT INDICATION (See graph below)
age of the external battery connected to the • If the unit is OFF, no LEDs will be lit, but • Red LED(s) 5 flashing on the affected chan-
trailer charge circuit (i.e. trailer battery). the battery will still charge.
• The LED on the charger is RED while nel represents: INTERCHANNEL SHORT OR
NOTE: The above LED light reference num- charging. REVERSED WIRES
• The LED on the charger will turn GREEN when • Red LED 5 solid on the affected channel
bers are used in the following instructions the battery is fully charged. represents: NO LOAD/OPEN CIRCUIT
for all rows. • Green LEDs 1-4 and Red LED 5 all solid on the
NOTE: The trailer tester will not function while affected channel represents: OVERLOAD
READ THIS FIRST: • Green LEDs 1-4 and Red LED 5 flashing on the
the internal battery is being charged. affected channel represents: SHORT CIRCUIT TO
Read and follow all trailer warnings and installa- GROUND
tion instructions before continuing. 5. MANUAL AND AUTO TEST – LEFT/STOP, RIGHT/ 8. EXTERNAL BATTERY (Measures the trailer bat-
1. Check to see that the mating surfaces of the STOP, TAIL, BRAKE, BACKUP CHANNELS tery’s (if present) open circuit voltage)
• Press the EXT BAT button. When pressed,
trailer wiring connector matches the Trailer AUTO TESTING (measuring the amount of load its indicator Red LED will light.
Tester connector. All connector surfaces on each channel): • Voltage will be displayed by lit LEDs in the
should be clean and free of dirt. For proper Power Row only.
operation, make sure the trailer tester battery • Press the AUTO TEST button. When pressed, • Green LED’s 2 and 3 mean that the external
is fully charged. Plug the trailer connector its indicator Green LED begins to flash. battery has normal voltage.
firmly into the Trailer Tester. Be sure that the • Red LED 1 flashing means that the external
connector is fully inserted. • Each channel will be tested from top battery needs to be charged or may need
2. Turn the tester ON by pressing the ON button. to bottom replacement.
All LEDs will cycle in order from top to bottom • Red LED 5 indicates that the battery is faulty or
and left to right and will flash once. The tester • Red LED 5 will flash as its channel is tested overcharged. Battery may need replacement.
is ready for use. • Green LED(s) will remain ON to indicate the
3. INDICATOR “LED” LIGHTS – POWER ROW ONLY NOTE: This test will automatically stop after
(Measuring the internal battery of the tester amount of load. (See Step 6 for LED display
– LED will remain lit after power has been load readouts) a few seconds and the red light will go out.
turned on) • See Step 7 for LED fault indication readouts.
• Green LEDs 2, 3 and 4 mean that the internal MANUAL TESTING (visual test of NOTE: This test does not indicate the amount
battery is OK to perform tests. trailer lighting)
• Red LED 1 flashing means that the internal • Depressing any manual button will cause of charge left in the trailer battery. (Excludes
battery needs to be charged (see “Charging that same channel to flash 11 times. This will breakaway battery)
the Internal Battery” instructions below) or allow you to walk around the trailer and 9. For technical assistance and warranty
may need to be replaced. confirm that lights are functioning properly.
• Red LED 5 indicates that the battery is faulty • The Trailer Tester will automatically shut information call: 1-888-785-5832 or
or overcharged. Battery may need to be down after three minutes to conserve www.tekonsha.com
replaced. the battery.
• See Step 7 for LED fault indication readouts. FAULT INDICATION GRAPH

NOTE: To CLEAR THE DISPLAY or TURN OFF P/N 8007 REV B

AUTO TEST, simply press the auto test button.
Then you are ready to test again.
6. HOW TO READ THE LED DISPLAY

(for approximate load readouts)
LEFT/STOP, RIGHT/STOP and BACKUP Load

Readouts:
• Green LED 1 represents .25 amps
• Green LED 2 represents 2 amps
• Green LED 3 represents 3 amps
• Green LED 4 represents 4 amps
TAIL Load Readout:
• Green LED 1 represents .25 amps
• Green LED 2 represents 4 amps
• Green LED 3 represents 6 amps
• Green LED 4 represents 8 amps

P-36 ©2016 Horizon Global, Inc. P/N 98929-20176 Rev. D. 10/3 for 2017

REESE®
PIONEERING PERFORMANCE

HORIZON GLOBAL
THE HIGHEST QUALITY OF
CUSTOM ENGINEERING

INDEMNIFICATION / WARRANTIES /
NUMERICAL

INDEMNIFICATION PROGRAM 6 / 7-Way Connectors. . . . . . . . . . . . . . . . . . . . . . .34-35

INDEMNIFICATION / WARRANTIES / NUMERICAL Installation Indemnification Program. . . . . . . . . . . . . . . . . . . . .2 Fifth Wheel Rail Kits. . . . . . . . . . . . . . . . . . . . . . .35-37

Elite™ Series Fifth Wheel Rail Kits. . . . . . . . . . . . . . . . .37

WARRANTIES Elite™ Series Gooseneck. . . . . . . . . . . . . . . . . . . . .37
Under-Bed Gooseneck. . . . . . . . . . . . . . . . . . . . .37-38
Limited Lifetime Warranty. . . . . . . . . . . . . . . . . . . . . . . . . .3 Above-Bed Gooseneck. . . . . . . . . . . . . . . . . . . .38
Limited Year Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Roofs Racks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38-43

Truck Bed Racks . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

APPLICATION PRODUCT NUMERICAL

Class I Receiver Hitches. . . . . . . . . . . . . . . . . . . . . . . .4-6 PRODUCT NUMERICAL
Class II Receiver Hitches. . . . . . . . . . . . . . . . . . . . . . . .6-9
Class III/IV Receiver Hitches. . . . . . . . . . . . . . . . . . . .9-16 Product Numerical. . . . . . . . . . . . . . . . . . . . . . . .44-64

Class III/IV Multi-Fit Receiver Hitches. . . . . . . . . . . . .16-17

Class V Receiver Hitches. . . . . . . . . . . . . . . . . . . . . . .17-19

Class V (2-1/2") Receiver Hitches. . . . . . . . . . . . . . . . . .19

Front Mount Receiver Hitches. . . . . . . . . . . . . . . . . .19-21

1-Plug Adapters. . . . . . . . . . . . . . . . . . . . . . .21-22

2-Plug Adapters. . . . . . . . . . . . . . . . . . . . . . .22-24

T-One Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . .24-30

Tow Harnesses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30-31

Fifth Wheel Harnesses. . . . . . . . . . . . . . . . . . . . . . .31-34

Q-1 ©2016 Horizon Global, Inc. P/N 98929-2017 Rev. D. 10/3 for 2017

WARRANTY

How would you like to reduce
the cost of your hitch installation

liability insurance and get

ADDITIONAL PROTECTION FREE?

INSTALLED INFORMED INSURED

Install Cequent Before installation A: Give the copy of the
Performance Products, Inc begins, present the towing signed towing safety form to
branded applicable products safety form to the customer
properly, according to the the customer.
and have them read
instructions included. and sign it. B: Retain the original
signed towing safety form

for your records.

DEALER SUPPORT DEALER BENEFITS WARRANTY

In the interest of safe towing, Draw-Tite®, Hidden Hitch®, and What you receive is the potential of significant cost savings by
Reese® offer this Dealer Installation Indemnification Program. We’re reducing your installation liability coverage for Horizon branded
committed to designing and building the industry’s highest quality products. We design and build safety into everything we produce,
trailer hitches and towing accessories. We also back our equipment so we have the confidence to back Horizon branded products with
with an extraordinary level of support for our customers. Once this comprehensive program. Therefore you’ll be able to serve your
enrolled in the Dealer Installation Indemnification Program, when customers with a new level of confidence, knowing Horizon backs
you sell and properly install complete Draw-Tite®, Hidden Hitch®, or your work. However, Horizon recommends you determine your base
Reese® applicable products according to written instructions and liability coverage requirements with your local insurance professional.
provide your customers with the required information for safe and
proper towing, you are indemnified on any claim over USD $2,000 ELIGIBILITY
arising from your installation of Horizon branded products.
(For conditions and limitation see Dealer Agreement.) To qualify for the Dealer Installation Indemnification Program, you
must be a qualified Draw-Tite® or Reese® Installer. If you install other
INDEPENDENT OF THIS AGREEMENT, THE HORIZON GLOBAL, INC LIMITED manufacturers’ products, you will need to maintain liability insurance
LIFETIME WARRANTY REMAINS IN EFFECT to cover non Horizon branded products.
WITH RESPECT TO PRODUCT CLAIMS.
PROGRAM COST
To enroll in the program, contact your Sales Representative
There is no charge to the participating Dealer.

Q-2 ©2016 Horizon Global, Inc. P/N 98929-2017 Rev. D. 10/3 for 2017

WARRANTY

LIMITED LIFETIME WARRANTY LIMITED 1/3/5/7/10/15 YEAR WARRANTY

• 1. Limited Lifetime Warranty (“Warranty”). Horizon • 1. Limited Warranty. Horizon Global, Inc. (“We” or
Global, Inc. ("We" or “Us”) warrants to the original “Us”) warrants to the original consumer purchaser
consumer purchaser only ("You") that the product only (“You”) that the product will be free from material
will be free from material defects in both material defects in both material and workmanship for a
and workmanship, ordinary wear and tear excepted; specific period*, ordinary wear and tear excepted;
provided that installation and use of the product is in provided that installation and use of the product is in
accordance with product instructions. There are no accordance with product instructions. There are no
other warranties, express or implied, including the other warranties, express or implied, including the
warranty of merchantability or fitness for a particular warranty of merchantability or fitness for a particular
purpose. This warranty is not transferable. purpose. If the product does not comply with this
period specific limited warranty*, Your sole and
• 2. Limitations on the Warranty. This Warranty does exclusive remedy is that We will replace the product
not cover: (a) normal wear and tear; (b) damage without charge to You and within a reasonable time
through abuse, neglect, misuse, or as a result of any or, at our option, refund the purchase price. This
accident or in any other manner; (c) damage from warranty is not transferable.
misapplication, overloading, or improper installation;
(d) improper maintenance and repair; and (e) product • 2. Limitations on the Warranty. This limited warranty
alteration in any manner by anyone other than Us, does not cover: (a) normal wear and tear; (b)
with the sole exception of alterations made pursuant damage through abuse, neglect, misuse, or as
to product instructions and in a workmanlike a result of any accident or in any other manner;
manner. (c) damage from misapplication, overloading, or
improper installation, including welds; (d) improper
• 3. Obligations of Purchaser. To make a Warranty maintenance and repair; and (e) product alteration in
claim, contact Us, at our principal address of any manner by anyone other than Us, with the sole
47912 Halyard Dr. Suite 100, Plymouth, MI 48170, exception of alterations made pursuant to product
1-800-521-0510, identify the product by model instructions and in a workmanlike manner.
number, and follow the claim instructions that
will be provided. Any returned product that is • 3. Obligations of Purchaser. To make a warranty
replaced by Us becomes our property. You will be claim, contact Us, at our principal address of
responsible for return shipping costs. Please retain 47912 Halyard Dr. Suite 100, Plymouth, MI 48170,
your purchase receipt to verify date of purchase and 1-800-521-0510, identify the product by model
that You are the original consumer purchaser. The number, and follow the claim instructions that will be
product and the purchase receipt must be provided provided. Any returned product that is replaced or
to Us in order to process Your Warranty claim. refunded by Us becomes our property. You will be
responsible for return shipping costs. Please retain
• 4. Remedy Limits. Product replacement is Your your purchase receipt to verify date of purchase and
sole remedy under this Warranty. We shall not that You are the original consumer purchaser. The
be liable for service or labor charges incurred in product and the purchase receipt must be provided
removing or replacing a product or any incidental or to Us in order to process Your warranty claim.
consequential damages of any kind.
• 4. Remedy Limits. Repair or replacement is Your
• 5. Assumption of Risk. You acknowledge and sole remedy under this limited warranty or any
agree that any use of the product for any purpose other warranty related to the product. We shall not
other than the specified use(s) stated in the product be liable for service or labor charges incurred in
instructions is at Your own risk. removing or replacing a product or any incidental or
consequential damages of any kind.
• 6. Governing Law. This Warranty gives You specific
legal rights, and You also may have other rights • 5. Assumption of Risk. You acknowledge and
which vary from state to state. This Warranty is agree that any use of the product for any purpose
governed by the laws of the State of Michigan, other than the specified use(s) stated in the product
without regard to rules pertaining to conflicts of instructions is at Your own risk.
law. The state courts located in Oakland County,
Michigan shall have exclusive jurisdiction for any • 6. Governing Law. This limited warranty gives You
disputes relating to this Warranty. specific legal rights, and You also may have other
rights which vary from state to state. This limited
WARRANTY warranty is governed by the laws of the State of
Michigan, without regard to rules pertaining to
conflicts of law. The state courts located in Oakland
County, Michigan shall have exclusive jurisdiction for
any disputes relating to this warranty.

*Visit www.reeseprod.com for a copy of the specific
warranty.

Q-3 ©2016 Horizon Global, Inc. P/N 98929-2017 Rev. D. 10/3 for 2017