DRAW-TITE 2017 Catalog

WEIGHT DISTRIBUTION ACCESSORIES

LOAD-MASTER TRAILER TONGUE WEIGHT SCALE

• Load-Master is a hydraulic pressure gauge for measuring trailer tongue weights
from 0 to 2,000 lbs.

5780 Part No. Description

5780 Load-Master Trailer Tongue Weight Scale

POLE TONGUE ADAPTER

A Pole Tongue Adapter is used as a mounting platform for the Lift Brackets of a
Weight Distributing Hitch System when a trailer has a pole or straight tongue rather
than an A-Frame tongue.
• Fits all lift units regardless of manufacturer
• Fits tongue widths from 1-5⁄8” to 5”
• Fits tongue heights from 3” to 6”

3280 Part No. Description Gross Trailer Wt. Tongue Wt.

3280 Pole Tongue Adapter and Fastener Kit 7,500 lbs. 750 lbs.
14,000 lbs.* 1400 lbs.*
58393 Pole Tongue Adapter and Fastener Kit 12,000 lbs.** 1200 lbs.**

Note: Not for use with light duty weight distributing hitch
* When mounted on top of the tongue
** When mounted below the tongue

WEIGHT DISTRIBUTING CHAIN HANGERS

For trailers with tongue interference (gas bottles, batteries, covered frames, etc,)
where snap up brackets (#21501) won’t install easily, we offer two easy-to-install
options.

58305

58306 • Black powder coat finish over A-coat WEIGHT DISTRIBUTION SYSTEMS
• Installs quickly! (approximately 15 minutes)
21501 • Includes hardware
www.reeseprod.com
Part No. Description Gross Trailer Wt. Tongue Wt.

58305 Chain Hanger, Bolt On 14,000 lbs. 1400 lbs.
58306 Chain Hanger, Clamp On 14,000 lbs. 1400 lbs.

WEIGHT DISTRIBUTING SNAP UP BRACKETS

• Rugged positive locking design
• Unit locks using safety pin (#55180)
• Narrower, for increased frame clearance
• One-piece cast chain hook
• Black powder coat finish over A-coat

Part No. Description

6637 Snap Up Bracket Assembly Kit w/handle (2- piece)
58162 Snap Up Handle
21501 Snap Up Bracket w/Set Screw & Safety Pin
Snap Up Bracket w/Set Screw & Safety Pin (for use w/Weight Distribution Systems w/
58392 Tongue Weights 800 lbs. and Over)

©2016 Horizon Global, Inc. P/N 98929-2017 Rev. D. 10/3 for 2017 E-16

REESE®
REVOLUTIONIZING
THE 5TH WHEEL

FIFTH WHEEL HITCHES

REESE® ELITE™ FIFTH WHEEL HITCHES 20K Fifth Wheel with Square Tube Slider. . . . . . . . . . . . . . .13

Reese® Elite™ 26.5K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 16K Fifth Wheel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Reese® Elite™ 25K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 16K Fifth Wheel with Square Tube Slider. . . . . . . . . . . . . . .14
Reese® Elite™ 18K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 16K Fifth Wheel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Reese® Elite™ Rail Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 16K Fifth Wheel with Square Tube Slider. . . . . . . . . . . . . . .15
Reese® Elite™ Rail Kit Application Guide. . . . . . . . . . . . . . . .4 Fifth Wheel Hitch Service Kits. . . . . . . . . . . . . . . . .15

Reese® Elite™ Above-Bed Gooseneck. . . . . . . . . . . . . . . . . .5 FIFTH WHEEL ACCESSORIES

Reese® Elite™ 20K Drop-In For Ram 2500/3500 HD. . . . . .5 Lube Plates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Reese® Elite™ Rail Kit Mounting Adapters. . . . . . . . . . . . . . .6 Locks & Chain Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

REESE® FIFTH WHEEL HITCHES Capture Plates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Reese® 20K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Rails & Installation Kits. . . . . . . . . . . . . . . . . . . . . . . . . . .19

FIFTH WHEEL HITCHES Reese® 16K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 FIFTH WHEEL HITCH DIMENSIONS

Reese® Round Tube Sliders. . . . . . . . . . . . . . . . . . . .8 Fifth Wheel Height Dimensions. . . . . . . . . . . . . . . . . . . . .16
Reese® Outboard Mounting Rails. . . . . . . . . . . . . . .8 Mounting Rail Height Dimensions. . . . . . . . . . . . . . . . . . .16
Reese® Outboard Installation Brackets & Kits. . . . 8-9 Mounting Adapter Height Dimensions. . . . . . . . . . . . . . . .16

REESE® SELECT SERIES FIFTH WHEELS FIFTH WHEEL HITCH APPLICATION GUIDES

Reese® Select 20K. . . . . . . . . . . . . . . . . . . . . . . . . . .10 Elite™ Fifth Wheel Rail Kits. . . . . . . . . . . . . . . . . . . . . . . . . .4
Reese® Select Low Profile 30K. . . . . . . . . . . . . . . . . .11 Custom Quick Install Bracket & Complete Outboard Kit. . .9
Reese® Select 22K. . . . . . . . . . . . . . . . . . . . . . . . . . .11 Fifth Wheel 10 Bolt Rail Kits. . . . . . . . . . . . . . . . . . . . . . . . . .20
Reese® Select 16K. . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Fifth Wheel Universal Rail Kits. . . . . . . . . . . . . . . . . . .21

FIFTH WHEEL HITCHES

25K Fifth Wheel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

20K Fifth Wheel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

F-1 www.reeseprod.com ©2016 Horizon Global, Inc. P/N 98929-2017 Rev. D. 10/3 for 2017

NEW PRODUCTS

Series 560xx Series 500xx

OUTBOARD FIFTH WHEEL BRACKETS CUSTOM QUICK INSTALL BRACKETS

• Vehicle specific outboard fifth wheel custom quick • Vehicle specific fifth wheel custom quick install
install brackets brackets

• Kits also available that include mounting rails

FEATURED PRODUCTS

30845

30047

REESE® ELITE™ ABOVE-BED GOOSENECK REESE® SELECT SERIES FIFTH WHEELS

• Specifically designed for the Professional tower who • Two-jaw locking system
employes both fifth wheel and gooseneck trailers • Side-to-side pivot action

30871 30160 FIFTH WHEEL HITCHES

REESE® ELITE™ FIFTH WHEELS REESE® RAM DROP-IN FIFTH WHEEL

• Increased king pin/jaw contact design, king pin • Direct fit for RAM trucks with OE tow package
indicator and self latch system

www.reeseprod.com ©2016 Horizon Global, Inc. P/N 98929-2017 Rev. D. 10/3 for 2017 F-2

ELITE™ FIFTH WHEEL HITCHES

PRE ASSEMBLED 26.5K ELITE™

30871 • 26,500 lbs. capacity / • Wider 9” (vs 6”) king pin • Saves approximately one
6,625 lbs. pin funnel area on head hour of assembly time
Includes 90°Wire weigh capacity
Harness 50-97-410 • Vehicle specific under • Foot assembly is
• Improved 4 way bed mounting kits hand tightened
head pivot
• Lockable handle (Pad • Includes wrench to
• 4˚ side to side pivot lock sold separately) tighten foot assembly
for better control
• 1/4” turn handle “quick • Shipped in one
• Forged single jaw lock” mount system convenient carton
• Increased king pin/jaw
• Non-pin mounting • SAE J2638 Compliant
contact design reduces slop • Limited Lifetime Warranty
• Self latching jaw design
• King pin indicator • Contemporary 21st
• Wider footprint for century appearance

increased stability • Extended length handle
• Stamped rounded head • Pre-assembled fifth

wheel units

Part No. Description Vertical Adjustment

30871 26.5K Elite™ - pre assembled 15” to 17-1/2”

Note: Will not fit trucks with beds shorter than 6’ in length unless used with Sidewinder™.
Will not fit trucks with flareside/stepside.

REPLACEMENT PARTS

Part No. Description

58541 26.5K Elite Series Fifth Wheel Center Section
58542 26.5K Elite Series Fifth Wheel Center Section Bolt Kit
58543 26.5K Elite Series Fifth Wheel Base Arches

30143† PRE ASSEMBLED 25K ELITE™

Includes 90°Wire All 26.5K features other than gross and pin weight capacity.
Harness 50-97-410
• 25,000 lbs. capacity / 6,250 lbs. pin weight capacity
• SAE J2638 Compliant

Part No. Description Vertical Adjustment

30143† 25K Elite™ - pre assembled 14-1/2” – 17”

Note: Will not fit trucks with beds shorter than 6’ in length unless used with Sidewinder™.
Will not fit trucks with flareside/stepside.

FIFTH WHEEL HITCHES 30142 PRE ASSEMBLED 18K ELITE™

Includes 90°Wire All 25K features other than gross and pin weight capacity.
Harness 50-97-410
• 18,000 lbs. capacity / 4,500 lbs. pin weight capacity
• SAE J2638 Compliant

Part No. Description Vertical Adjustment

30142 18K Elite™ - pre assembled 14-1/2” – 18-1/4”
30144 18K Elite™ with Silder - pre assembled 16-1/2” – 19”

Note: Will not fit trucks with beds shorter than 6’ in length unless used with Sidewinder™.
Will not fit trucks with flareside/stepside.

30144 † = Available while supplies last.

F-3 www.reeseprod.com ©2016 Horizon Global, Inc. P/N 98929-2017 Rev. D. 10/3 for 2017

ELITE™ FIFTH WHEEL RAIL KITS

ELITE™ RAIL KITS

Elite™ Rail Kits are designed for use with the Elite™ Systems only.
• “Power Puck” mounting system provides uninhibited use of truck bed when fifth

wheel or gooseneck is dismounted
• Wider platform/mounting footprint (increased stability)
• Custom-fit under-bed mounting system
• Black powder coat finish
• SAE J2638 Compliant

30868 30852 30126
GM Applications Dodge Applications Ford Applications

REESE® ELITE™ FIFTH WHEEL RAIL KITS APPLICATION GUIDE

Make/Model Style Years Bracket# NoDrill FN

Chevrolet/GMC Except 8 ft. Bed(Classic) 99-07 30061 Ø SW
Silverado/Sierra 1500 (Classic) 01-07 30061 Ø
Silverado/Sierra 1500 HD Ø

Silverado/Sierra 2500 Except 8 ft. Bed 99-04 30061

Silverado/Sierra 2500 HD Except 8 ft. Bed 01-10 30061

Silverado/Sierra 2500 HD 11-16 30868 Ø

Silverado/Sierra 3500 HD Except 8 ft. Bed 07-10 30061

Silverado/Sierra 3500 HD 11-16 30868 Ø

Dodge/Ram

Ram 1500 Except Mega Cab 02-08 30067

Ram 1500 02-08 30074 Ø

Ram 2500 Except Mega Cab 03-12 30067

Ram 2500 03-13 30074

Ram 2500 10-12 30852

Ram 3500 Except Mega Cab 03-12 30067

Ram 3500 03-12 30074

Ram 3500 10-12 30852

Ford

F-150 Except Cab & Chassis 04-14 30064 SW
F-250/350 Super Duty 99-10 30073 Ø
Ø
F-250/350 Super Duty Except Cab & Chassis 11-16 30126

F-450 Super Duty Except Cab & Chassis 08-10 30073

F-450 Super Duty Except Cab & Chassis 11-16 30126

SW - Do not install on a truck with less than a 6’ long bed unless the trailer is equipped with a Sidewinder pin box coupler #SW16K or #SW19K. FIFTH WHEEL HITCHES

30061 30067 30074 30073
GM Applications Dodge Applications Dodge Applications Ford Applications

www.reeseprod.com ©2016 Horizon Global, Inc. P/N 98929-2017 Rev. D. 10/3 for 2017 F-4

ELITE™ GOOSENECK & FIFTH WHEEL HITCHES

30845 ELITE™ SERIES ABOVE-BED GOOSENECK
For use with Elite™ rail kits only
• Rated for 25,000 lbs. capacity
30149 • 2-5⁄16” high strength zinc plated ball
58419 • Specifically designed for the Professional tower who employs both fifth wheel

30863 and gooseneck trailers
• Utilizes the same vehicle specific under-bed rail kit system as the

Elite™ fifth wheel
• Above-Bed Gooseneck can be easily removed for unobstructed use of the

truck bed
• Weather resistant plastic covering provides protection from the elements and

aesthetic appeal
• Built-in chain bracket to accommodate safety chain
• Limited Lifetime Warranty

Part No. Description

30845 25K Elite™ Series Gooseneck

Note: Will not fit trucks with beds shorter than 6’ in length. Will not fit trucks with flareside/stepside.

ACCESSORY/REPLACEMENT PARTS

Part No. Description

30149 Elite™ Rail Kit Accessory, Plastic Bedliner Puck Adapter Kit (includes: (4) Pucks & (4)
Spacers)
58419 Service kit adapter for Signature Series Fifth Wheels & Goosenecks when used on Elite™
58458 Rail Kits (#30126 & #30868) & Ford OEM rail kits
Replacement Part, Trim Rings (4) for GM and Dodge Elite™ Rail Kits

REESE® 20K FIFTH WHEEL, DROP-IN FOR RAM 2500
HD/3500 HD

• 20,000 lbs. capacity / 5,000 lbs. pin weight capacity
• 14-1/4” – 18” vertical adjustment
• Direct fit for RAM trucks with OE tow package
• Built-in handles for easy, safe installation and removal
• Built with Elite™ series fifth wheel head
• SAE J2638 Compliant
• Limited Lifetime Warranty

Part No. Description

30160 Reese® 20K Fifth Wheel, Drop-In for RAM 2500 HD/3500 HD w/Factory Installed
OE Rail System

REPLACEMENT PARTS

FIFTH WHEEL HITCHES Part No. Description

30863 Center Section, Drop-In for Ram Drop In #30160
30864 Fifth Wheel Base Arches, Drop-In for Ram #30160
117300 Elite™ Fifth Wheel Head Kit

30864 117300

F-5 www.reeseprod.com ©2016 Horizon Global, Inc. P/N 98929-2017 Rev. D. 10/3 for 2017

FIFTH WHEEL HITCHES

RAIL KIT MOUNTING ADAPTER

30156 • 20,000 lbs. gross / 5,000 lbs. pin weight capacity
30154 • SAE J2638 Compliant
• The robust Reese adapter will not touch or scratch the truck bed
• Works with any 15K, 16K, or 20K standard fifth wheel hitch
• Uses the fast and secure Reese® patented latching system
• Built-in handles for safe, easy installation and removal
• Limited Lifetime Warranty

Part No. Description

30156 Rail Kit Mounting Adapter, for Ford OEM and Elite™ Series Under-Bed Rail Kits

• 25,000 lbs. gross / 6,250 lbs. pin weight capacity
• SAE J2638 Compliant
• Use with RAM OEM under-bed rail kit
• The robust Reese adapter will not touch or scratch the truck bed
• Works with any standard fifth wheel hitch up to 25k
• Uses the fast and secure Reese® patented latching system
• Limited Lifetime Warranty

Part No. Description FIFTH WHEEL HITCHES

30154 Rail Kit Mounting Adapter, Drop-In for RAM 2500 HD/3500 HD w/Factory Installed OE
Rail System

www.reeseprod.com ©2016 Horizon Global, Inc. P/N 98929-2017 Rev. D. 10/3 for 2017 F-6

TITAN® FIFTH WHEEL HITCHES

REESE® 16K FIFTH WHEEL

Reese®, the brand that started the towing industry once again
revolutionizes the fifth wheel hitch with the introduction of the Titan® 16K.
Reese® remains unmatched in safety, reliability and performance.

30866† • 16,000 lbs. capacity / 4,000 lbs. pin weight capacity
• CONTOURED HANDLE
CONTOURED HANDLE - Customized grip includes universal control instructions
CAST HEAD & JAW - New control handle eliminates separate latch and high visibility for system
CAST PIVOT BEAM
30867† lock and load
30870† • PREMIUM REESE ARCH
- Updated pin mounting holes better align with current rail kits, reducing looseness
F-7 www.reeseprod.com • SAE J2638 COMPLIANT
- Based on heavy duty, accelerated life cycle criteria developed by SAE for

fifth wheels
- Fatigue and static tested to pass 900,000 cycles
• SIDEWINDER COMPATIBLE
- Premium choice for short bed trucks
• CAST HEAD
- Commercial durability and strength
- Improved head funneling for king pin to latch
- Patent pending king pin indicator is highly visible
• CAST JAW SYSTEM
- Double jaw mechanism, heavier for longer wear, improved tolerances,

eliminating chucking in jaw system
- Improved life and wear with added grease points
• CAST PIVOT BEAM
- Incorporates a dual vibration isolator system for vertical and longitudinal

vibration dampening and improved ride
- Wider mounting for better stability and reduced wear
- Easier assembly of cast pivot beam to cross member
- Head and pivot beam can be offset 1” front or rear to maximize performance
• Requires rails & installation kit (sold separately)
• Optional slider available for additional turning clearance
• Limited Lifetime Warranty

Part No. Description Vertical Adjustment

30866† 16K Fifth Wheel Hitch 13-3/4” to 17-3/4”
30869† 16K Fifth Wheel Hitch and Round Tube Slider 16-1/4” to 19”
83003† 16K Fifth Wheel Lube Plate ­—
83004† 16K Fifth Wheel 12” Thin Round Lube Plate, 1/8” Thick ­—

FIFTH WHEEL HITCHES Note: Will not fit trucks with beds shorter than 6’ in length unless used with Sidewinder™.
Will not fit trucks with flareside/stepside.

REESE® 20K FIFTH WHEEL

• 20,000 lbs. capacity / 5,000 lbs. pin weight capacity
• All Titan® 16K features PLUS quadruple vibration isolator system for vertical and

longitudinal vibration dampening and improved ride
• Custom lube plate included
• Limited Lifetime Warranty

Part No. Description Vertical Adjustment

30867† 20K Fifth Wheel Hitch 14-1/4” – 18-1/4”
30870† 20K Fifth Wheel Hitch and Round Tube Slider 16-3/4” – 19-1/2”

Note: Will not fit trucks with beds shorter than 6’ in length unless used with Sidewinder™.
Will not fit trucks with flareside/stepside.

† = Available while supplies last.

©2016 Horizon Global, Inc. P/N 98929-2017 Rev. D. 10/3 for 2017

FIFTH WHEEL HITCHES

50024 REESE® ROUND TUBE SLIDER
58493
• Up to 20,000 lbs
• 10” travel fore-and-aft
• Slider system re-engineered to be the best in the industry
• Current slider systems expanded to give true ease and precision
• Contoured rollers float from side to side to accommodate mounting systems

that may not be fully square
• Embossed roller supports for low friction and longer wear
• Forged mounting feet for wide consistent attachment to rails
• Updated pin mounting holes to better align with the current rail kits and

reduce play
• Plated rails hold up longer for extended wear
• SAE J2638 COMPLIANT
- Based on heavy duty, accelerated life cycle criteria developed by SAE for

fifth wheel and gooseneck
- SAE J2638 is a fatigue and static requirements of new European style test

of 900,000 cycles
- New customized grip
• Limited lifetime warranty

Part No. Description

50024 Round Tube Slider

REPLACEMENT PARTS

Part No. Description

58493 Titan® Round Tube Slider Handle, Grip, Roll Pin & Cotter Pins

30153 REESE® OUTBOARD MOUNTING RAILS
58467
• SAE J2638 COMPLIANT
- Based on heavy duty, accelerated life cycle criteria developed by SAE for

fifth wheels
- J2638 are fatigue and static requirements based on the European style test

of 900,000 cycles
• HARDWARE
- Grade 8 hardware, meets all Canadian requirements
• FAST CUSTOM MOUNT SYSTEM
- Rails are wider (48”) for faster install, because the mounting points are

outside the truck frame, allowing the installer to avoid under-bed components
• Limited lifetime warranty

Part No. Description

30153 Reese® Outboard Fifth Wheel Mounting Rails Only (10 bolt design)

ACCESSORY PARTS FIFTH WHEEL HITCHES

58467 4 Hole Style Pins (Qty. 4) & Clips (Qty. 4) for Reese Outboard Fifth Wheel Mounting Rails
#30153

Vehicle Specific Brackets - REESE® OUTBOARD INSTALLATION BRACKETS AND KITS F-8
Kits with Vehicle Specific
Brackets and Mounting Rails • Vehicle specific Reese Outboard Fifth Wheel Custom Quick Install Brackets
www.reeseprod.com available

• Kits also available that include Reese Outboard Fifth Wheel Mounting Rails
and Vehicle Specific Brackets

SEE APPLICATION GUIDE OR WWW.REESEPROD.COM FOR VEHICLE APPLICATIONS

©2016 Horizon Global, Inc. P/N 98929-2017 Rev. D. 10/3 for 2017