MBS_Standoffs-2016_Catalog

C A T A L O GC ATA LO G
2016

-standoffs.com ALUMINUM STANDOFFS
STAINLESS STEEL STANDOFFS
QUICK SNAP STANDOFFS
EDGE GRIPS
WIRE SUSPENSION
CABLE SYSTEMS
HANGING SYSTEMS
ROD SYSTEMS
SIGNAGE
GLASS
HARDWARE

-standoffs.com [email protected]
M B S - S TA N D O F F S . C O M

For you, for us, the new Mbs Standoffs catalog is always an important event!
Crafted by experts for the experts, it is a complete interactive tool guide to
facilitate your job, and to help you be a step ahead at all times!

We are hoping to answer your questions even more precisely, as well as to enable
you to take full advantage of this offer.

Either by phone, email, fax, or directly onto our e-commerce website, our experts
truly value the opportunity to help you and provide you with expertise all
throughout your needs and job requirements.

Our experts are always by your side to advise you.

At Mbs, we put our heart, passion, and professionalism at your service to always
offer you the best!

Constantly in the market, always exhibiting on tradeshows, we are continually
innovating, and testing new products to offer you the best quality you are looking
for.

Our valuable specialists are trained all through out the year.

At Mbs, we assure you that we truly understand our products, and market and will
provide you with the best technical guidance.

For Bulk Quantity, Special Design, Special Requests,

Please Call Us! 1-813-938-6025

A Very Professional Product Specialist Will Assist You!

GET ALL PRICES
THROUGH OUR
ONLINE SHOP!

1 LOG ON to 2 Search, using filter
www.mbs-standoffs.com selection and find the
Select the line of products right product!
you are looking for!

3 Use all product tabs to 4 Shipping calculation
find: and payment
n Description completed in
n Pictures 3 easy steps!
n Datasheets
n Videos

99.99% OF ORDERS
SHIP SAME DAY!

Daily Pick-up.

We have a daily pick-up, so that all of our customers can take
advantage of same day shipping.

Blind Shipping & Drop Shipping Available Upon Request

Don’t forget we can always ship on your account, so no
upfront payment for shipping is needed. Wait for it on your
next bill.

If you are local you can pick up your order within 30 minutes
of placing your order

3 5/16" 5
1 7.6mm 2
25 11/16" 2"
652mm - recommended width 51mm 6 DETAIL K
3 3/16" SCALE 1 : 2
80.8mm - recommended heightDETAIL L
panel from floorSCALE 1 : 25

2 3/8" 4
60.3mm
3/8"DETAIL M
9.5mm -overlappedSCALE 1 : 2

ITEM NO. PART NUMBER DESCRIPTION QTY.
1 Panelll 1
DETAIL R 14 1/2" 2 ZCP1 12
SCALE 2 : 13 369 -recommended distance 3 Wallll 1
4 M5x25 Plastic Anchor 38
5 C 3,5x19 - C 60
6 ZCP1 - 3ft 4

Title : ZCP1-3ft Scale : 1:13 Mbs R&D
Sizes : Letter Landscape Customer:
depends on the panel Mbs Standoffs Material: Finish Qty : Rep :
6420 Benjamin Rd N°programme laser
Tampa, FL 33634 N°prog. Mécanum. N° Plan : ZCP1-3ft
USA
813-938-6025

This document and the product mentioned in Reference are the exclusive property of MBS-Standoffs, they can not be used, reproduced, disclosed or disclosed without prior authorization

Monday thru Friday: 5:30pm Monday - Thursday: 6:30pm, Friday: 5:45pm

Can Ship to Canada with Fedex, UPS & USPS, and anywhere in the world with DHL

INDEX

STANDOFFS 2 Z-CLIP PANEL 60
4
Inexpensive Stainless Steel 6 Z-Clip Panel 62
Tamper Proof Stainless Steel 8
Inexpensive Aluminum 11 QUICK SNAP LETTER 65
Inexpensive Aluminum Tamper Proof 12 66
Hardware For Standoffs 16 Quick Snap Standoffs 69
Special Satin Stainless Steel Standoffs 18 71
Stainless Steel Square Standoffs CABLE SYSTEMS 72
Desktop Standoffs 75
8.5" x 11" Acrylic Sign Holders 79
CUSTOMIZABLE STANDOFFS 8.5" x 11" Acrylic Sign Holder Kit 80
Caps Standoffs 20 LED Poster Holder 81
LED Poster Holder kit
Barrels 22 Cable Kits 82
Panel Grips for Cable Kits 86
Aluminum Square Caps and Barrels 24 Horizontal Shelf Cable Supports 89
Shelf Supports for Cable Kits 90
Hardware for Customizable Standoffs 26 Suspended Aluminum Cable Kits 92
93
Tools for Customizable Standoffs 31 ROD SYSTEMS
94
EDGE GRIP STANDOFFS 32 Rod Kits
34 Panel Grips for Rod Kits
Adjustable Edge Grip Standoffs Suspended Aluminum Rod Kit
Stainless Steel Edge Grip Standoffs Shelf Supports for Rod Kits
Rod Accessories
SCREW COVER KNOBS 36 Aluminum Track and accessories

Stainless Steel Screw Covers HANGING SYSTEMS

PROJECTING & SUSPENDED 38 Hanging System
39
Stainless Steel Projecting Wall Mount 40
AluminumProjecting Wall Mount 41
Stainless Steel Projecting 42
Stainless Steel Flag Sign 44
Suspended System
Hooks for Stainless Steel and Nylon Cable

SIGNAGE & GLASSES
Full Set Flat Glass Desk Standoffs Kit 48

Flat Square Glass With 4 Holes 50

Flat Glass with 2 Holes 51

Rectangular Glass With 4 or 8 Holes 52

Sign Glass Paper Holder 53

Flat Glass Without Holes 54

Curved Glass 56

Stainless Steel Standoffsfor Curved Glass 57 -standoffs.com

Hardware 58

INEXPENSIVE STAINLESS STEEL

2 Finishes

• Wall Mounted Standoffs

• Designed from High Quality Solid
Stainless Steel for Indoor Use

• Satin Brushed and Polished

• 6 Different Diameters
• 5 Different Heights: ½", ¾", 1", 1¾"

and 2½" for each Diameter

• Protective Washers Included

Polished Satin Brushed

Barrel Washers 1. Insert Anchor in wall
Head Cap 2. Add the screw through the barrel and into
Anchor
Your Material the anchor
Screw 3. Place washer on top of barrel
4. Align material on top of washer and add
Wall
top washer
See Screw and Anchor page: 6 5. Take cap/stud, go through washers, material

2 and screw into barrel

Aluminum line available pages 6 - 8

1-813-938-6025 -standoffs.com

INEXPENSIVE STAINLESS STEEL STANDOFFS

2 Finishes — For Indoor Use

Standoff Material Thickness Stainless Steel

Brushed Polished

½" Diameter – 3/8" Hole Diameter (to be drilled in material)

½" (12.7 mm) ¼" (6.35 mm) SBLS12-12 SBLP12-12 M8 Thread 0.55in
5/16’’ 14mm
¾" (19 mm) 3/16" (4 mm) to ½" (12.7 mm) SBLS12-25 SBLP12-25 8mm Maximum
Thickness
1" (25.4 mm) 3/16" (4 mm) to ½" (12.7 mm) SBLS12-30 SBLP12-30 Thickness
From 3/16’’ 4mm It
1¾" (45 mm) 3/16" (4 mm) to ½" (12.7 mm) SBLS12-50 SBLP12-50

2½" (65 mm) 3/16" (4 mm) to ½" (12.7 mm) SBLS12-70 SBLP12-70 To 1/2’’ 12mm

5/8" Diameter – 7/16" Hole Diameter (to be drilled in material) 1/2’’ (12.7 mm)

½" (12.7 mm) ¼" (6.35 mm) SBLS16-12 SBLP16-12 3/4’’ (20 mm)

¾" (19 mm) 3/16" (4 mm) to ½" (12.7 mm) SBLS16-25 SBLP16-25 1’’ (25 mm)
1 3/4’’ (45 mm)
2 1/2’’ (65 mm)

1" (25.4 mm) 3/16" (4 mm) to ½" (12.7 mm) SBLS16-30 SBLP16-30 3/16’’
4.50mm
1¾" (45 mm) 3/16" (4 mm) to ½" (12.7 mm) SBLS16-50 SBLP16-50

2½" (65 mm) 3/16" (4 mm) to ½" (12.7 mm) SBLS16-70 SBLP16-70 1/2’’
12mm
For Drywall Use: Screw 2208 and Anchor ANC5, ANC5Z. For Concrete Use: Screw 2208 and Anchor ANC1

¾" Diameter – 7/16" Hole Diameter (to be drilled in material)

½" (12.7 mm) ¼" (6.35 mm) SBLS19-12 SBLP19-12 M10 Thread
3/8’’Title :
¾" (19 mm) 3/16" (4 mm) to ½" (12.7 mm) SBLS19-25 SBLP19-25 SBL12-50
10mm
Thickness
1" (25.4 mm) 3/16" (4 mm) to ½" (12.7 mm) SBLS19-30 SBLP19-30 From 3/16’’ 4mm MBS Sign USA Material:
Tel.: 352-593-4151 N°programme laser
1¾" (45 mm) 3/16" (4 mm) to ½" (12.7 mm) SBLS19-50 SBLP19-50 To 1/2’’ 12mm Fax: 352-796-4437
Brooksville, FL

2½" (65 mm) 3/16" (4 mm) to ½" (12.7 mm) SBLS19-70 SBLP19-70 Ce document et le produit cité en réference sont la propriété exclusive de MBS S

Extended Head 1" (25.4 mm) S19SSS S19SSP 1/2’’ (12.7 mm)
3/4’’ (20 mm)
7/8" Diameter – 7/16" Hole Diameter (to be drilled in material)
1’’ (25 mm)
½" (12.7 mm) ¼" (6.35 mm) SBLS22-12 SBLP22-12 1 3/4’’ (45 mm)
2 1/2’’ (65 mm)

¾" (19 mm) 3/16" (4 mm) to ½" (12.7 mm) SBLS22-25 SBLP22-25 3/16’’
4.50mm
1" (25.4 mm) 3/16" (4 mm) to ½" (12.7 mm) SBLS22-30 SBLP22-30

1¾" (45 mm) 3/16" (4 mm) to ½" (12.7 mm) SBLS22-50 SBLP22-50 1’’
25mm
2½" (65 mm) 3/16" (4 mm) to ½" (12.7 mm) SBLS22-70 SBLP22-70

Extended Head 1" (25.4 mm) S22SSS S22SSP

1" Diameter – 7/16" Hole Diameter (to be drilled in material)

½" (12.7 mm) ¼" (6.35 mm) SBLS25-12 SBLP25-12

¾" (19 mm) 3/16" (4 mm) to ½" (12.7 mm) SBLS25-25 SBLP25-25

1" (25.4 mm) 3/16" (4 mm) to ½" (12.7 mm) SBLS25-30 SBLP25-30

1¾" (45 mm) 3/16" (4 mm) to ½" (12.7 mm) SBLS25-50 SBLP25-50

2½" (65 mm) 3/16" (4 mm) to ½" (12.7 mm) SBLS25-70 SBLP25-70

Extended Head 1" (25.4 mm) S25SSS S25SSP Thick Material

1¼" Diameter – 7/16" Hole Diameter (to be drilled in material) Extended Head alloItwe1ms forQU1typ. tSoB1L"25-50 Description
Body (25x45)
½" (12.7 mm) ¼" (6.35 mm) SBLS30-12 SBLP30-12
Available in: ¾", 732/8", 1"1diSaBmL2e5tHeerad
¾" (19 mm) 3/16" (4 mm) to ½" (12.7 mm) SBLS30-25 SBLP30-25 2 SBL25 Washer

1" (25.4 mm) 3/16" (4 mm) to ½" (12.7 mm) SBLS30-30 SSBBLLTPPit33le00--:5300SBL25-50 Scale : 1:1 Mbs R&D
1¾" (45 mm) 3/16" (4 mm) to ½" (12.7 mm) SBLS30-50 Sizes :Letter Landscape Customer:

2½" (65 mm) 3/16" (4 mm) to ½" (12.7 mm) SBLS30-70 SBLP30-70 MBS Sign USA Material: Finish Qty : Rep :
Tel.: 352-593-4151 N°programme laser N°prog. Mécanum.

For Drywall Use: Screw 2216 and Anchor ANC6, ANC6Z. For Concrete Use: Screw 2216 and Anchor ANC2Fax: 352-796-4437 N° Plan : SBL25-50
Brooksville, FL

Ce document et le produit cité en réference sont la propriété exclusive de MBS Sign, ils ne peuventêtre utilisé, reproduits, communiqués ou divulgués sans autorisation préalable

m b s - s t a n d o f f s . c o m-standoffs.com 3

STANDOFFS TAMPER PROOF STAINLESS STEEL

Standoffs (2 Finishes) — For Indoor and Outdoor Use

• Wall Mounted Standoffs Polished Satin Brushed

• Designed from High Quality Solid
Stainless Steel for Indoor and
Outdoor use

• Satin Brushed and Polished

• Set Screw to lock head in place

• 6 Different Diameters

• 5 Different Heights ½", ¾", 1",1¾"
and 2½" For Each Diameter

• Protective Washers

Set Screw locks head in place!

Barrel Washers 1. Insert Anchor in wall
Head Cap 2. Add the screw through the barrel and into
Anchor Screw
Set Screw Your Material the anchor
3. Place washer on top of barrel
4. Align material on top of washer and add

top washer
5. Take cap/stud, go through washers, material

and screw into barrel

Your Material 1-813-938-6025 -standoffs.com

See Screw and Anchor page: 11

4

TAMPER PROOF STAINLESS STEEL STANDOFFS

Standoffs (2 Finishes) — For Indoor and Outdoor Use

Standoff Material Thickness Stainless Steel

Brushed Polished

½" Diameter – 3/8" Hole Diameter (to be drilled in material)

½" (12.7 mm) ¼" (6.35 mm) LBLS12-12 LBLP12-12 M8 Thread 0.55in
5/16’’ 14mm
¾" (19 mm) 3/16" (4 mm) to ½" (12.7 mm) LBLS12-25 LBLP12-25 Thickness 8mm Maximum
From 3/16’’ 4mm Thickness
1" (25.4 mm) 3/16" (4 mm) to ½" (12.7 mm) LBLS12-30 LBLP12-30
It
1¾" (45 mm) 3/16" (4 mm) to ½" (12.7 mm) LBLS12-50 LBLP12-50 To 1/2’’ 12mm

2½" (65 mm) 3/16" (4 mm) to ½" (12.7 mm) LBLS12-70 SBLP12-70 1/2’’ (12.7 mm)

For Drywall Use: Screw 2208 and Anchor ANC5, ANC5Z. For Concrete Use: Screw 2208 and Anchor ANC1 3/4’’ (20 mm)

5/8" Diameter – 7/16" Hole Diameter (to be drilled in material) 1’’ (25 mm)
1 3/4’’ (45 mm)
½" (12.7 mm) ¼" (6.35 mm) LBLS16-12 LBLP16-12 2 1/2’’ (65 mm)

¾" (19 mm) 3/16" (4 mm) to ½" (12.7 mm) LBLS16-25 LBLP16-25 3/16’’
4.50mm
1" (25.4 mm) 3/16" (4 mm) to ½" (12.7 mm) LBLS16-30 LBLP16-30
1/2’’
1¾" (45 mm) 3/16" (4 mm) to ½" (12.7 mm) LBLS16-50 LBLP16-50 12mm

2½" (65 mm) 3/16" (4 mm) to ½" (12.7 mm) LBLS16-70 LBLP16-70

Both ½" diameter and 5/8" diameter use the 2208, ANC5, ANC5Z, & ANC1

¾" Diameter – 7/16" Hole Diameter (to be drilled in material) M10 Thread SBL12-50
3/8’’Title :
½" (12.7 mm) ¼" (6.35 mm) LBLS19-12 LBLP19-12 Thickness
From 3/16’’ 4mm 10mm

¾" (19 mm) 3/16" (4 mm) to ½" (12.7 mm) LBLS19-25 LBLP19-25 To 1/2’’ 12mm MBS Sign USA Material:
Tel.: 352-593-4151 N°programme laser
1" (25.4 mm) 3/16" (4 mm) to ½" (12.7 mm) LBLS19-30 LBLP19-30 Fax: 352-796-4437
Brooksville, FL

1¾" (45 mm) 3/16" (4 mm) to ½" (12.7 mm) LBLS19-50 LBLP19-50 Ce document et le produit cité en réference sont la propriété exclusive de MBS S

2½" (65 mm) 3/16" (4 mm) to ½" (12.7 mm) LBLS19-70 LBLP19-70 1/2’’ (12.7 mm)
3/4’’ (20 mm)
Extended Head 1" (25.4 mm) S19SS304 S19SSP
1’’ (25 mm)
7/8" Diameter – 7/16" Hole Diameter (to be drilled in material) 1 3/4’’ (45 mm)
2 1/2’’ (65 mm)

½" (12.7 mm) ¼" (6.35 mm) LBLS22-12 LBLP22-12 3/16’’
4.50mm
¾" (19 mm) 3/16" (4 mm) to ½" (12.7 mm) LBLS22-25 LBLP22-25

1" (25.4 mm) 3/16" (4 mm) to ½" (12.7 mm) LBLS22-30 LBLP22-30 1’’
25mm
1¾" (45 mm) 3/16" (4 mm) to ½" (12.7 mm) LBLS22-50 LBLP22-50

2½" (65 mm) 3/16" (4 mm) to ½" (12.7 mm) LBLS22-70 LBLP22-70

Extended Head 1" (25.4 mm) S22SS304 S22SSP

1" Diameter – 7/16" Hole Diameter (to be drilled in material)

½" (12.7 mm) ¼" (6.35 mm) LBLS25-12 LBLP25-12

¾" (19 mm) 3/16" (4 mm) to ½" (12.7 mm) LBLS25-25 LBLP25-25

1" (25.4 mm) 3/16" (4 mm) to ½" (12.7 mm) LBLS25-30 LBLP25-30

1¾" (45 mm) 3/16" (4 mm) to ½" (12.7 mm) LBLS25-50 LBLP25-50

2½" (65 mm) 3/16" (4 mm) to ½" (12.7 mm) LBLS25-70 LBLP25-70

Extended Head 1" (25.4 mm) S25SS304 S25SSP

1¼" Diameter – 7/16" Hole Diameter (to be drilled in material) Item Qty. Description
1
1 SBL25-50 Body (25x45)

½" (12.7 mm) ¼" (6.35 mm) LBLS30-12 LBLP30-12 Thick Material 2 1 SBL25 Head
¾" (19 mm) 3/16" (4 mm) to ½" (12.7 mm) LBLS30-25 LBLP30-25 3 2 SBL25 Washer

Extended Head Saclalloe w: 1:s1 for Up toM1b"s R&D
1" (25.4 mm) 3/16" (4 mm) to ½" (12.7 mm) LBLS30-30 LBLTPit3le0-:30
1¾" (45 mm) 3/16" (4 mm) to ½" (12.7 mm) LBLS30-50
2½" (65 mm) 3/16" (4 mm) to ½" (12.7 mm) LBLS30-70 SBL25-50LBLP30-50
Available in: ¾", 7/8", 1" DiamterLBLP30-70
Sizes :Letter Landscape Customer:

MBS Sign USA Material: Finish Qty : Rep :
Tel.: 352-593-4151 N°programme laser N°prog. Mécanum.
Fax: 352-796-4437

For Drywall Use: Screw 2216 and Anchor ANC6, ANC6Z. For Concrete Use: Screw 2216 and Anchor ANC2Brooksville, FL N° Plan : SBL25-50

Ce document et le produit cité en réference sont la propriété exclusive de MBS Sign, ils ne peuventêtre utilisé, reproduits, communiqués ou divulgués sans autorisation préalable

m b s - s t a n d o f f s . c o m-standoffs.com 5

STANDOFFS INEXPENSIVE ALUMINUM

Standoffs (5 Finishes) — For Indoor and Outdoor Use

• Wall Mounted Standoffs
• Designed from High Quality Solid

Aluminum for Indoor & Outdoor
• 5 Different Finishes
• 6 Different Diameters
• 5 Different Heights
• Protective Washers

AluDm(Auin)llum AluS(mhAiiSnn)yum

AluBm(laBicn)kum AluGm(oGiln)dum AlBur(mAonBinz)uem

SCREW AND ANCHOR  3 Easy Steps...

1 Screw 2 Mount Head 3 Done Deal!

See Screw and Anchor page: 11 1-813-938-6025 -standoffs.com

6

INEXPENSIVE ALUMINUM STANDOFFS

Standoffs (5 Finishes) — For Indoor and Outdoor Use

Standoff Material Thickness Dull Shiny Aluminum Gold Bronze
Black
N/A
½" Diameter — 3/8" Hole Diameter (to be drilled in material) AL12-25AB
AL12-30AB
½" (12.7 mm) ¼" (6.35 mm) AL12-12A AL12-12AS AL12-12B AL12-12G
¾" (19 mm) AL12-25G N/A
1" (25.4 mm) 3/16" (4 mm) to ½" (12.7 mm) AL12-25A AL12-25AS AL12-25B AL12-30G N/A
1¾" (45 mm) AL12-50G
2½" (65 mm) 3/16" (4 mm) to ½" (12.7 mm) AL12-30A AL12-30AS AL12-30B AL12-70G N/A
AL16-25AB
3/16" (4 mm) to ½" (12.7 mm) AL12-50A AL12-50AS AL12-50B AL16-30AB

3/16" (4 mm) to ½" (12.7 mm) AL12-70A AL12-70AS AL12-70B N/A
N/A
5/8" Diameter — 7/16" Hole Diameter (to be drilled in material)
N/A
½" (12.7 mm) ¼" (6.35 mm) AL16-12A AL16-12AS AL16-12B AL16-12G AL19-25AB
AL16-25G AL19-30AB
¾" (19 mm) 3/16" (4 mm) to ½" (12.7 mm) AL16-25A AL16-25AS AL16-25B AL16-30G
AL16-50G N/A
1" (25.4 mm) 3/16" (4 mm) to ½" (12.7 mm) AL16-30A AL16-30AS AL16-30B AL16-70G N/A

1¾" (45 mm) 3/16" (4 mm) to ½" (12.7 mm) AL16-50A AL16-50AS AL16-50B N/A
AL22-25AB
2½" (65 mm) 3/16" (4 mm) to ½" (12.7 mm) AL16-70A AL16-70AS AL16-70B AL22-30AB

For Drywall Use: Screw 2208 and Anchor ANC5, ANC5Z. For Concrete Use: Screw 2208 and Anchor ANC1 N/A
N/A
¾" Diameter — 7/16" Hole Diameter (to be drilled in material)
N/A
½" (12.7 mm) ¼" (6.35 mm) AL19-12A AL19-12AS AL19-12B AL19-12G AL25-25AB
¾" (19 mm) AL19-25G AL25-30AB
1" (25.4 mm) 3/16" (4 mm) to ½" (12.7 mm) AL19-25A AL19-25AS AL19-25B AL19-30G
1¾" (45 mm) AL19-50G N/A
2½" (65 mm) 3/16" (4 mm) to ½" (12.7 mm) AL19-30A AL19-30AS AL19-30B AL19-70G N/A

3/16" (4 mm) to ½" (12.7 mm) AL19-50A AL12-50AS AL19-50B N/A
N/A
3/16" (4 mm) to ½" (12.7 mm) AL19-70A AL19-70AS AL19-70B N/A
N/A
7/8" Diameter — 7/16" Hole Diameter (to be drilled in material) N/A

½" (12.7 mm) ¼" (6.35 mm) AL22-12A AL22-12AS AL22-12B AL22-12G
¾" (19 mm) AL22-25G
1" (25.4 mm) 3/16" (4 mm) to ½" (12.7 mm) AL22-25A AL22-25AS AL22-25B AL22-30G
1¾" (45 mm) AL22-50G
2½" (65 mm) 3/16" (4 mm) to ½" (12.7 mm) AL22-30A AL22-30AS AL22-30B AL22-70G

3/16" (4 mm) to ½" (12.7 mm) AL22-50A AL22-50AS AL22-50B

3/16" (4 mm) to ½" (12.7 mm) AL22-70A AL22-70AS AL22-70B

1" Diameter — 7/16" Hole Diameter (to be drilled in material)

½" (12.7 mm) ¼" (6.35 mm) AL25-12A AL25-12AS AL25-12B AL25-12G
¾" (19 mm) AL25-25G
1" (25.4 mm) 3/16" (4 mm) to ½" (12.7 mm) AL25-25A AL25-25AS AL25-25B AL25-30G
1¾" (45 mm) AL25-50G
2½" (65 mm) 3/16" (4 mm) to ½" (12.7 mm) AL25-30A AL25-30AS AL25-30B AL25-70G

3/16" (4 mm) to ½" (12.7 mm) AL25-50A AL25-50AS AL25-50B

3/16" (4 mm) to ½" (12.7 mm) AL25-70A AL25-70AS AL25-70B

1¼" Diameter — 7/16" Hole Diameter (to be drilled in material)

½" (12.7 mm) ¼" (6.35 mm) AL30-12A AL30-12AS AL30-12B AL30-12G
AL30-25G
¾" (19 mm) 3/16" (4 mm) to ½" (12.7 mm) AL30-25A AL30-25AS AL30-25B AL30-30G
AL30-50G
1" (25.4 mm) 3/16" (4 mm) to ½" (12.7 mm) AL30-30A AL30-30AS AL30-30B AL30-70G

1¾" (45 mm) 3/16" (4 mm) to ½" (12.7 mm) AL30-50A AL30-50AS AL30-50B

2½" (65 mm) 3/16" (4 mm) to ½" (12.7 mm) AL30-70A AL30-70AS AL30-70B

For Drywall Use: Screw 2216 and Anchor ANC6, ANC6Z. For Concrete Use: Screw 2216 and Anchor ANC2

m b s - s t a n d o f f s . c o m-standoffs.com 7

STANDOFFS INEXPENSIVE ALUMINUM TAMPER PROOF

Tamper Proof Standoffs engineered with a reverse thread-for indoor and outdoor use

• Wall Mounted Standoffs NEW
• Designed from High Quality Solid

Aluminum for Indoor & Outdoor
• 5 Different Finishes
• 6 Different Diameters
• 5 Different Heights
• Protective Washers

See Screw and Anchor page: 11

Aof#Ao1nvmralCyseithlraaaiotcbniaMlcde'esoBfSfs, ! AluS(mhAiiSnn)yum AluBm(laBicn)kum AluGm(oGiln)dum AlBur(mAonBinz)uem
AluDm(Auin)llum

Cable kits section on page 72 1-813-938-6025 -standoffs.com

8

INEXPENSIVE ALUMINUM TAMPER PROOF STANDOFFS

Tamper Proof Standoffs engineered with a reverse thread-for indoor and outdoor use

Standoff Material Thickness Dull Shiny Aluminum Gold Bronze
Black
N/A
½" Diameter — 3/8" Hole Diameter (to be drilled in material) FAH12-25AB
FAH12-30AB
½" (12.7 mm) ¼" (6.35 mm) FAH12-12A FAH12-12AS FAH12-12B FAH12-12G
¾" (19 mm) FAH12-25G N/A
1" (25.4 mm) 3/16" (4 mm) to ½" (12.7 mm) FAH12-25A FAH12-25AS FAH12-25B FAH12-30G N/A
1¾" (45 mm) FAH12-50G
2½" (65 mm) 3/16" (4 mm) to ½" (12.7 mm) FAH12-30A FAH12-30AS FAH12-30B FAH12-70G N/A
FAH16-25AB
3/16" (4 mm) to ½" (12.7 mm) FAH12-50A FAH12-50AS FAH12-50B FAH16-30AB

3/16" (4 mm) to ½" (12.7 mm) FAH12-70A FAH12-70AS FAH12-70B N/A
N/A
5/8" Diameter — 7/16" Hole Diameter (to be drilled in material)

½" (12.7 mm) ¼" (6.35 mm) FAH16-12A FAH16-12AS FAH16-12B FAH16-12G
FAH16-25G
¾" (19 mm) 3/16" (4 mm) to ½" (12.7 mm) FAH16-25A FAH16-25AS FAH16-25B FAH16-30G
FAH16-50G
1" (25.4 mm) 3/16" (4 mm) to ½" (12.7 mm) FAH16-30A FAH16-30AS FAH16-30B FAH16-70G

1¾" (45 mm) 3/16" (4 mm) to ½" (12.7 mm) FAH16-50A FAH16-50AS FAH16-50B

2½" (65 mm) 3/16" (4 mm) to ½" (12.7 mm) FAH16-70A FAH16-70AS FAH16-70B

For Drywall Use: Screw 2208 and Anchor ANC5, ANC5Z. For Concrete Use: Screw 2208 and Anchor ANC1

¾" Diameter — 7/16" Hole Diameter (to be drilled in material)

½" (12.7 mm) ¼" (6.35 mm) FAH19-12A FAH19-12AS AL19-12B FAH19-12G N/A
¾" (19 mm) FAH19-25G FAH19-25AB
1" (25.4 mm) 3/16" (4 mm) to ½" (12.7 mm) FAH19-25A FAH19-25AS AL19-25B FAH19-30G FAH19-30AB
1¾" (45 mm) FAH19-50G
2½" (65 mm) 3/16" (4 mm) to ½" (12.7 mm) FAH19-30A FAH19-30AS AL19-30B FAH19-70G N/A
N/A
3/16" (4 mm) to ½" (12.7 mm) FAH19-50A FAH12-50AS AL19-50B
N/A
3/16" (4 mm) to ½" (12.7 mm) FAH19-70A FAH19-70AS AL19-70B FAH22-25AB
FAH22-30AB
7/8" Diameter — 7/16" Hole Diameter (to be drilled in material)
N/A
½" (12.7 mm) ¼" (6.35 mm) FAH22-12A FAH22-12AS AL22-12B FAH22-12G N/A
¾" (19 mm) FAH22-25G
1" (25.4 mm) 3/16" (4 mm) to ½" (12.7 mm) FAH22-25A FAH22-25AS AL22-25B FAH22-30G N/A
1¾" (45 mm) FAH22-50G FAHz25-25AB
2½" (65 mm) 3/16" (4 mm) to ½" (12.7 mm) FAH22-30A FAH22-30AS AL22-30B FAH22-70G FAH25-30AB

3/16" (4 mm) to ½" (12.7 mm) FAH22-50A FAH22-50AS AL22-50B N/A
N/A
3/16" (4 mm) to ½" (12.7 mm) FAH22-70A FAH22-70AS AL22-70B
N/A
1" Diameter — 7/16" Hole Diameter (to be drilled in material) N/A
N/A
½" (12.7 mm) ¼" (6.35 mm) FAH25-12A FAH25-12AS AL25-12B FAH25-12G N/A
¾" (19 mm) FAH25-25G N/A
1" (25.4 mm) 3/16" (4 mm) to ½" (12.7 mm) FAH25-25A FAH25-25AS AL25-25B FAH25-30G
1¾" (45 mm) FAH25-50G
2½" (65 mm) 3/16" (4 mm) to ½" (12.7 mm) FAH25-30A FAH25-30AS AL25-30B FAH25-70G

3/16" (4 mm) to ½" (12.7 mm) FAH25-50A FAH25-50AS AL25-50B

3/16" (4 mm) to ½" (12.7 mm) FAH25-70A FAH25-70AS AL25-70B

1¼" Diameter — 7/16" Hole Diameter (to be drilled in material)

½" (12.7 mm) ¼" (6.35 mm) FAH30-12A FAH30-12AS AL30-12B FAH30-12G

¾" (19 mm) 3/16" (4 mm) to ½" (12.7 mm) FAH30-25A FAH30-25AS AL30-25B FAH30-25G

1" (25.4 mm) 3/16" (4 mm) to ½" (12.7 mm) FAH30-30A FAH30-30AS AL30-30B FAH30-30G

1¾" (45 mm) 3/16" (4 mm) to ½" (12.7 mm) FAH30-50A FAH30-50AS AL30-50B FAH30-50G

2½" (65 mm) 3/16" (4 mm) to ½" (12.7 mm) FAH30-70A FAH30-70AS AL30-70B FAH30-70G

For Drywall Use: Screw 2216 and Anchor ANC6, ANC6Z. For Concrete Use: Screw 2216 and Anchor ANC2

m b s - s t a n d o f f s . c o m-standoffs.com 9

STANDOFFS Solid Steel Powder
Coated Panel Stand

NEW

Sold Without Panel Why limit yourself to walls and ceilings?
Use this beautifully designed Standing Sign Base to
10 create an incredible and portable sign display!

Item #: PS370

Maximum Thickness Panel Accepted: 3/4''
Sizes: 14'' x 14'' x 10''
Weight: 3.6lb

INSTALLATION

Unscrew the caps from the base and remove the steel retaining
panel. Place your material against the sign base and thread
your screws through your material.

Place the steel retaining panel on the other side of your
material, slide the screws through, and tighten the caps until
snug. Take a step back and admire your gorgeous display!

1-813-938-6025 -standoffs.com

HARDWARE FOR STANDOFFS STANDOFFS

For Drywall and Concrete

Item # Description Diameter Length

ANC5 Plastic Anchor #6

Barrel Washers

ANC5Z Zinc Anchor #6 Anchor Screw Head
ANC1 Plastic Anchor #6 Set Screw Cap
2208 #6 1½" (40 mm) Your Material
Drill size ¼" Your Material
Phillips Flat Head Screw

ANC6 Plastic Anchor #8 1. Insert Anchor in wall
2. Add the screw through the barrel
ANC6Z Zinc Anchor #8
#8 and into the anchor
ANC2 Plastic Anchor #8 1½" (40 mm) 3. Place washer on top of barrel
Drill size ¼" 4. Align material on top of washer

2216 Phillips Flat Head Screw and add top washer
5. Take cap/stud, go through washers,
Screw and Anchor for stronger resistance (Select Products only)
material and screw into barrel

ANC3 Plastic Anchor #10
Drill size 5/16" #10 1¼" (32 mm)

2225 Phillips Flat Head Screw

Screw and Anchor for stronger resistance (Select Products only)

ANC4 Plastic Anchor #12
2234 Drill size 3/8" #12 1¼" (32 mm)

Phillips Flat Head Screw

TBW9 Nylon Toggle Wings #8 Pre-drill 9/16"
TBW9K Nylon Toggle Tool #8 1½" (32 mm)
2216 Phillips Flat Head Screw

TBW6 Spring Toggle Wings #6 Anchor Datasheet weight
2200Z Phillips Flat Head Screw #6 2½" (63 mm) limits available on our website
TBW8 #8
2300 Spring Toggle Wings #8 2½" (63 mm) or upon request to Certified Sales
Phillips Flat Head Screw Reps

-standoffs.com mbs-standoffs.com 11

STANDOFFS SPECIAL SATIN STAINLESS STEEL
STANDOFFS

For Indoor and Outdoor Use

• Wall Mounted Standoffs 3 Different Heads
• Designed from High Quality Stainless Steel 2 Different Heights
• With Set Screw to Lock in Place
• Satin Brushed Finish
• Grooved Cap for Security
• 3 Different Heads
• 2 Different Heights
• Protective Washers Included

See Screw and Anchor page: 11 1. Insert Anchor in wall 4. Align material on top of washer
2. Add the screw through the barrel and add top washer
12
and into the anchor 5. Take cap/stud, go through washers,
3. Place washer on top of barrel material and screw into barrel

1-813-938-6025 -standoffs.com

SPECIAL SATIN STAINLESS STEEL STANDOFFS
STANDOFFS

For Indoor and Outdoor Use

9/16" (14 mm) DIAMETER
9/16" (14 mm) STANDOFF

Item # Item # Head
for Indoor for Outdoor
Flat
PFI14.15 PFI14.15S Rounded Flat Head Rounded Head Conical Head
Conical
PFI14.15R None

PFI14.15C None

Use for Drywall: 2208 Screw and 3/8’’ 1/16’’
Anchor ANC5, ANC5Z 9mm 1.70mm

Use for Concrete: 2208 Screw and From 3/16’’4mm 3/16’’
Anchor ANC1 To 1/4’’ 6mm 5mm

Thickness of material accepted: 9/16’’ 9/16’’
Minimum 3/16" (4 mm) Maximum ¼" (6 mm) 14mm 14mm

Hole Diameter to be drilled for your
Material: 3/8"

Title : PFI14.15 Item
1
9/16" (14 mm) DIAMETER MBS Sign USA Material: 2
1" (25.4 mm) STANDOFF Tel.: 352-593-4151 N°programme laser 3
Fax: 352-796-4437 4
Brooksville, FL
Scale

Sizes

Finish

N°prog.

Ce document et le produit cité en réference sont la propriété exclusive de MBS Sign, ils ne p

Item # Item # Head
for Indoor for Outdoor
Flat
PFI14.25 PFI14.25S Rounded Flat Head Rounded Head Conical Head
Conical
PFI14.25R None

PFI14.25C None

Use for Drywall: 2208 Screw and From 3/16’’4mm 3/8’’ 1/16’’
Anchor ANC5, ANC5Z To 9/16’’15mm 9mm 1.70mm

Use for Concrete: 2208 Screw and 1’’ 9/16’’ 3/16’’
Anchor ANC1 25mm 14mm 5mm

Thickness of material accepted:
Minimum 3/16 (4 mm)
Maximum 9/16 (15 mm)

Hole Diameter to be drilled for
your Material: 3/8"

m b s - s t a n d o f f s . c o m-standoffs.com Item Qty.

131 1 CPFI14.

2 1 CPFI14.
3 2 PFI14.15

STANDOFFS SPECIAL SATIN STAINLESS STEEL
STANDOFFS

For Indoor and Outdoor Use

• Wall Mounted Standoffs 2 Different Head
• Designed from High Quality Stainless Steel Thicknesses
• Set Screw to Lock in Place
• 2 Different Head Thicknesses

See Screw and Anchor page: 11 1-813-938-6025 -standoffs.com

14

SPECIAL SATIN STAINLESS STEEL STANDOFFS
STANDOFFS

For Indoor and Outdoor Use

0.205imn m 2
3
¾" (19 mm) DIAMETER — 1" (25.4 mm) STANDOFF
4
0.20in
Item # Item # Head 3/8’’ 0.35in B 5mm
9mm 9mm
for Indoor for Outdoor 3/16’’ 0.63in
From 3/16’’4mm or 5mm A 16mm
PFI19.25ST PFI19.25SST 3/16" Thick To 5/8’’ 16mm
1/16’’ Maximum
1.70mm Thickness

PFI19.25FL None 1/16" Thick

Use for Drywall: 2216 Screw and 1’’ M4 Set Screw
Anchor ANC6, ANC6Z 25mm
A
Use for Concrete: 2216 Screw and 3/16’’
Anchor ANC2 5mm 0.75in
19mm
Thickness of material accepted: 3/4’’ B
Minimum 3/16" (4 mm) 19mm
Maximum 5/8" (16 mm)
Item Qty. Description
Hole Diameter to be drilled for your
Material: 3/8" 1 1 PFI19.25ST Body

StHanedaadrd 2 1 FlPaFtI1H9.2e5aSdT Head
3
2 PFI19.19ST and PFI19.25ST Nylon W

4 1 M4x4mm Set Screw

Title : PFI19.25ST Scale : 1:1 Mbs R&D

Sizes : Letter Landscape Customer:

MBS Sign USA Material: Finish Qty : Rep :
Tel.: 352-593-4151 N°programme laser
Fax: 352-796-4437 N°prog. Mécanum. N° Plan : PFI19.25ST
Brooksville, FL

Ce document et le produit cité en réference sont la propriété exclusive de MBS Sign, ils ne peuventêtre utilisé, reproduits, communiqués ou divulgués sans autorisation préalab

1" (25.4 mm) DIAMETER — 1" (25.4 mm) STANDOFF

Item # Item # Head B 0.20in
for Indoor for Outdoor 3/8’’ 5mm
9mm 0.35in
3/16’’ 9mm 0.63in
16mm
PFI25.25ST PFI25.25SST 3/16" Thick From 3/16’’4mm or 5mm A
To 5/8’’ 16mm 1/16’’ Maximum
Thickness
PFI25.25FL None 1/16" Thick 1.70mm

Use for Drywall: 2216 Screw and 1’’ M4 Set Screw
Anchor ANC6, ANC6Z 25mm
A
Use for Concrete: 2216 Screw and 3/16’’
Anchor ANC2 5mm 0.75in
19mm
Thickness of material accepted: 1’’ B
Minimum 3/16" (4 mm) 25mm
Maximum 5/8" (16 mm)
Item Qty. Description
Hole Diameter to be drilled for your
Material: 3/8" StHanedaadrd 1 Flat Head1 PFI19.25ST Body
2
3 1 PFI19.25ST Head
2 PFI19.19ST and PFI19.25ST Nylon W

4 1 M4x4mm Set Screw

Title : PFI19.25ST Scale : 1:1 Mbs R&D

Sizes : Letter Landscape Customer:

MBS Sign USA Material: Finish Qty : Rep :
Tel.: 352-593-4151 N°programme laser
Fax: 352-796-4437 N°prog. Mécanum. N° Plan : PFI19.25ST
Brooksville, FL

Ce document et le produit cité en réference sont la propriété exclusive de MBS Sign, ils ne peuventêtre utilisé, reproduits, communiqués ou divulgués sans autorisation préalabl

m b s - s t a n d o f f s . c o m-standoffs.com 15

STANDOFFS STAINLESS STEEL SQUARE STANDOFFS

For Indoor and Outdoor Use

• Wall Mounted Standoffs 3 Different Square Sizes
• Designed from High Quality Stainless Steel 3 Different Heights
• Has a Set Screw to Lock in Place
• Satin Brushed Finish
• Has a Grooved Cap for Security
• 3 Different Square Sizes
• 3 Different Heights
• Protective Washers

Anchor

Screw

Barrel Your Material
Locked Screw Washer
Wall
Head

1. Insert Anchor in wall 4. Align material on top of washer and add top washer
5. Take cap/stud, go through washers, material and
2. Add the screw through the barrel and into the
anchor screw into barrel

3. Place washer on top of barrel 1-813-938-6025 -standoffs.com
See Screw and Anchor page: 11

16

STAINLESS STEEL SQUARE STANDOFFS STANDOFFS

For Indoor and Outdoor Use

9/16" (14 mm) SQUARE STANDOFF

Item # 0.1S2qin Size Standoff 3/8’’ 1/16’’
For Indoor 9mm 1.70mm
3mm A9/16" (14 mm)
CPFI14.14 From 1/8’’ 3mm
TMhiinc9i/k1m6n"ue(1ms4s mm) To 3/16’’ 5mm

Use for Drywall: 2208 Screw and Anchor ANC5, ANC5Z 9/16’’ 3/16’’
14mm 5mm
Use for Concrete: 2208 Screw and Anchor ANC1M4 Set Screw
9/16’’
AMThaixcikmn0ue.52msm0simn3o/1f6"m(5atmermia)l accepted: Minimum 1/8" (3 mm) 14mm

Hole DSiEamCeTtIeOr tNo bAe-Adrilled for your Material: 3/8"

2

50m.2m0in Item Qty. Description
1
7/8" (22 mm) SQUARE STANDOFF 2 1 C3PFI14.14 Body
3
4 1 CPFI14.14 Head

2 CPFI14.14 Foam Washer

1 M4x5mm Set Screw

CPFI14.140.16inTitle : Scale : 1:1 Mbs R&D

Item # Item #4mmCPFI22.22S MBS Sign USA Material: Sizes : Letter Lands2cape Custo93mm/8em’r’: 1/16’’
For Indoor For Outdoor StandoffMinimum FFinrisohm 1/8’’ 3mm Qty : 1.70mm
Rep :
Thickness To 3/4’’ 20mm

ACPFI22.22
Tel.: 352-593-4151

Fax: 352-796-4437 N°programme laser N°prog. Mécanum.

7/8"Brooksville, FL (22 mm) N° Plan : CPFI14.14

Ce document et le produit cité en réference sont la propriété exclusive de MBS Sign, ils ne peuventêtre utilisé, reproduits, communiqués ou divulgués sans autorisation préalable

Use for Drywall: 2216 Screw and Anchor ANMC46,SAeNt SCc6reZw 3 7/8’’
Use for Concrete: 2216 Screw and Anchor ANC2 22mm

AThickness of0m.20aitnerial accepted: Minimum 1/8" (3 mm) 3/16’’
5mm
Maximum ½" (51m2m.7 mm)
HSoEleCDTiaIOmNeteAr-tAo be drilled for your Material: 3/8" 4 7/8’’
22mm

05.m20min Item Qty. Description 1
1
2 1 CPFI22.22 Body

1 CPFI22.22 Head

3 2 CPFI22.22 Foam Washer

13/16" (30 mm) STQitleU: CAPRFEI2S2T.2A2NDOFF Scale : 1:1 4 1 M4x5mm Set Screw
Mbs R&D

Sizes : Letter Landscape Customer:

Item # For Sq Size0.24inMBS Sign USA SMattearianl: doff Finish Qty : 93m/8Rm’’ ep :
Indoor Tel.: 352-593-4151
Fax: 352-796-4437 N°programme laser N°proFg. rMoécmanum1./8’’ 3mmN° Plan : CPFI22.22 1/16’’
CPFI30.30 1.70mm
6mm Brooksville, FL

M1in3i/1m6"u(m30 mm) 13/16" (30 mm) To 3/4’’ 20mmCe document et le produit cité en réference sont la propriété exclusive de MBS Sign, ils ne peuventêtre utilisé, reproduits, communiqués ou divulgués sans autorisation préalable
Thickness

Use for Drywall: 2216 Screw and Anchor ANC6, ANC6Z

Use for Concrete: 2216 Screw and Anchor ANC2 1 3/16’’ 3/16’’
Thickness of material accepted: Minimum 1/8" (3 mm) 30mm 5mm
Maximum ¾" (20 mm)
Hole Diameter to 0b.2e0dinrilled for your Material: 3/8" 1 3/16’’
30mm
5mm

SECTION A-A

-standoffs.com mbs-standoffs.com 17
05.m20in

STANDOFFS

60°
DESKTOP STANDOFFS

• Desk standoffs 0.36in
• Designed from High Quality Stainless Steel 9.20mm
• Set Screw to Lock in Place
• Felted Pad Base / Bottom Set Screw

½" (12.7 mm) DIAMETER DESKTOP STANDOFFS 1.38in
35mm
0.08in
2.10mm

0.51in SE
13mm

Item # Mounting Ø Head Item
1
100.008 3/8" (10 mm) Flat 2
3
Thickness of material accepted 2 x 3/16" or 1 x 3/8" (2 x 4 mm or 9.53 mm) 4
5
Title : 100.008
Scale : 1:1
½" (12.7 mm) DIAMETER DESKTOP STANDOFFS MBS Sign USA Material:
Sizes : Letter Portrait
0.36inTel.: 352-593-4151 Finish

Fax: 352-796-4437 N°prog. Mécanum.
N°programme laser
Brooksville, FL 9.20mm

Ce document et le produit cité en réference sont la propriété exclusive de MBS Sign, ils ne peuventêtre utilisé, reproduits, co

0.08in Set Screw
2.10mm

0.98in 30°
25mm

0.51in SECT
13mm

Item # Mounting Ø Head

100.002 3/8" (10 mm) Flat

Thickness of material accepted: 2 x 3/16" or 1 x 3/8" (2 x 4 mm or 9.53 mm) Item Q
1
½" (12.7 mm) DIAMETER DOUBLE SIDED STAINLESS TSitlTe :EE10L0S.0C0R2EW 2 M
3 C
Item # Mounting Ø MBS Sign USA Material: 4 Q
Tel.: 352-593-4151 5 N
Fax: 352-796-4437 HeadN°programme laser
Brooksville, FL Scale : 1:1

Sizes : Letter Portrait
Finish

N°prog. Mécanum.

Ce document et le produit cité en réference sont la propriété exclusive de MBS Sign, ils ne peuventêtre utilisé, reproduits, comm

100.020 3/8" (10 mm) Flat

Thickness of material accepted: 2 x 3/16" or 1 x 3/8" (2 x 4 mm or 9.53 mm)

18 1 - 8 1 3 - 9 3 8 - 6 0 2 5 -standoffs.com

DESKTOP STANDOFFS STANDOFFS

5/16" (8 mm) DIAMETER DESKTOP STANDOFFS

1 3 M4 Thread 0.63in Description 1 102.005 Screw (M4 Thread)
2 16.10mm

Item # Mounting Ø Head 0.31in 0.16in 1 102.005 Body
8mm 4mm
Thickness
1020.0.8035in 3/16" (5 mm) Flat 3/16’’ to
3/8’’
21.03mm

Thickness of material accepted 3/16" to 3/8" (4 mm to 10 mm) Qty.

SECTION A-A

A 5/16" (8 mm) DIAMAETER DESKTOP STANDOFFS 0.98in Item
25mm 1
2

0.31in
7.80mm
0.26in Threaded 10-24
6.50mm

2.00in 10-24 Threaded A 1.38in A
50.70mm 35.05mm
0.31in
7.80mm

0.31in 0.28in SECTION A-A
7.94mm 7mm
0.63in 0.31in 0.371.9in4mm
Tapped 16mm 8mm

102.001

Title :102.001 Scale : 1:1 Mbs R&D

MBS USA Sizes : Letter Landscape Customer: A A

Material: SS201 Finish: Brushed Qty : Rep : 0.31in
N°programme laser 8mm
N°prog. Mécanum. N° Plan : 102.001

Ce document et le produit cité en réference sont la propriété exclusive de MBS Sign, ils ne peuventêtre utilisé, reproduits, communiqués ou divulgués sans autorisation préalable SS Sewt Screw 10-24 x 3/4'' (20 mm)

Title :102.004 Scale : 2:1 Mbs R&D

Sizes : Letter Landscape Customer:

MBS USA Material: SS201 Finish: Brushed Qty : Rep :

102.003N°programme laser
N°prog. Mécanum. N° Plan : 102.003

Ce document et le produit cité en réference sont la propriété exclusive de MBS Sign, ils ne peuventêtre utilisé, reproduits, communiqués ou divulgués sans auto

102.004

Description Length Thick. Material Stainless Aluminum
Accepted Steel
Dull Shiny Black Gold
102.003
Material Connector ¼" (6.35 mm) 5/16" (8 mm) 102.004 102.003A 102.003AS 102.003B 102.003G
5/16" (8 mm) 102.002 102.004A 102.004G
Conical Desktop Standoffs 2½" (63.5 mm) 5/16" (8 mm) 102.001 102.002A 102.004AS 102.004B 102.002G
5/16" (8 mm) 102.001A 102.001G
2½" (63.5 mm) 102.002AS 102.002B
Cylinder Desktop Standoffs
102.001AS 102.001B
2" (50.8 mm)

m b s - s t a n d o f f s . c o m-standoffs.com 19

CUSTOMIZABLE CAPS STANDOFFS
STANDOFFS
5 Finishes

• Wall mounted Standoffs 5 Different Finishes
• Designed from High Quality 3 Different Caps
• Stainless Steel and Aluminum For Indoor and Outdoor Use

Anchor Wall

PoSlitsSahtineeledels(SsP) BSrutSasthineeledels(sS) AAnlouCdmlieziaenrdum(A) Hanger bolt

Barrel

Washer Your
Stud Material

AAnlouBdmliazicenkdum(B) AAnlouGdmiozilenddum(G) Tubing
Washer
IDEAL FOR MULTI-MOUNT PROJECTS!
Cap
Customize your very own standoff!
Mix and match between: Finish, Color, and Sizes 1. Insert Anchor in wall
2. Add the combination screw to
• Choose your cap
anchor
• Choose your barrel 3. Screw barrel onto combination

• Determine stud lenght Standard Locking Rounded screw
• Add your washers 4. Screw stud in barrel and add one

• Don’t forget your combination screws and anchors (pages: 26-29) washer
5. Place your material on the studs

and add another washer
6. Screw cap onto stud
7. Take cap/stud, go through washers,

material and screw into barrel

20 1 - 8 1 3 - 9 3 8 - 6 0 2 5 -standoffs.com

CAPS STANDOFFS CUSTOMIZABLE
STANDOFFS
5 Finishes — Indoor - Outdoor

Cap Height Type Tapped Aluminum Stainless Steel

6-32 Dull Black Gold Brushed Polished

10-24 ¼" (6.35 mm) Diameter CAP025G

5/32" (4 mm) Standard 10-24 CAP025A CAP025B CAP038G CAP025SS CAP025SP

¼-20 3/8" (9.52 mm) Diameter CAP050G
5/16-18
¼" (6.35 mm) Standard ¼-20 CAP038A CAP038B CAP058025G CAP038SS CAP038SP
5/16-18 CAP058G
½" (12.7 mm) Diameter
¼-20 CAP058025LG
¼" (6.35 mm) Standard 5/16-18 CAP050A CAP050B CAP058LG CAP050SS CAP050SP
¼-20
5/16-18 5/8" (15.87 mm) Diameter CAP075025G

¼" (6.35 mm) Standard ¼-20 CAP058025A CAP058025B CAP058025SS CAP058025SP
¼" (6.35 mm) Standard 5/16-18 CAP058SS CAP058SP
¼" (6.35 mm) Locking ¼-20 CAP058A CAP058B
¼" (6.35 mm) Locking 5/16-18 CAP058025LSS CAP058025LSP
CAP058025LA CAP058025LB CAP058LSS CAP058LSP
¼-20
5/16-18 CAP058LA CAP058LB
¼-20
5/16-18 ¾" (19.05 mm) Diameter
¼-20
¼-20 = ¼" (6.35 mm)  Standard 5/16-18 CAP075025A CAP075025B CAP075025SS CAP075025SP
5/16-18 = 3/8" (9.52 mm) Standard
¼-20 = ¼" (6.35 mm)  Locking 5/16-18 CAP075A CAP075B CAP075G CAP075SS CAP075SP
5/16-18 = 3/8" (9.52 mm) Locking 5/16-18
¼-20 = ¼" (6.35 mm)  5/16-18 CAP075025LA CAP075025LB CAP075025LG CAP075025LSS CAP075025LSP
5/16-18 = 3/8" (9.52 mm)
¼-20 = ¼" (6.35 mm)  5/16-18 CAP075LA CAP075LB CAP075LG CAP075LSS CAP075LSP
5/16-18 = 3/8" (9.52 mm) 5/16-18
5/16-18
¼-20 = ¼" (6.35 mm)  Standard 7/8" (22.22 mm) Diameter CAP078025SS CAP078025SP
5/16-18 = 3/8" (9.52 mm) Standard 5/16-18 N/A N/A
¼-20 = ¼" (6.35 mm)  Locking 5/16-18 CAP078025A CAP078025B CAP078025G
5/16-18 = 3/8" (9.52 mm) Locking CAP078025LSS CAP078025LSP
¼-20 = ¼" (6.35 mm)  N/A N/A N/A N/A N/A
5/16-18 = 3/8" (9.52 mm)
¼-20 = ¼" (6.35 mm)  CAP078025LA CAP078025LB CAP078025LG
5/16-18 = 3/8" (9.52 mm)
N/A N/A N/A

1" (25.4 mm) Diameter

3/8" (9.52 mm) Standard CAP100025A CAP100025B CAP100025G CAP100025SS CAP100025SP
3/8" (9.52 mm) Standard CAP100G CAP100SS CAP100SP
5/16" (8 mm) Locking CAP100A CAP100B
5/16" (8 mm) Locking CAP100025LG CAP100025LSS CAP100025LSP
1/8" (3.2 mm) Rounded CAP100025LA CAP100025LB CAP100LG CAP100LSS CAP100LSP
1/8" (3.2 mm) Rounded N/A N/A N/A
CAP100LA CAP100LB CAP100RG CAP100RSS CAP100RSP

N/A N/A

CAP100RA CAP100RB

1¼" (31.75 mm) Diameter

½" (12.7 mm) Standard CAP125A CAP125B CAP125G CAP125SS CAP125SP
5/16" (8 mm) Locking CAP125LG CAP125LSS CAP125LSP
1/8" (3.2 mm) Rounded CAP125LA CAP125LB CAP125RG CAP125RSS CAP125RSP

CAP125RA CAP125RB

1½" (38.10 mm) Diameter

½" (12.7 mm) Standard CAP150A CAP150B CAP150G CAP150SS CAP150SP
5/16" (8 mm) Locking CAP150LG CAP150LSS CAP150LSP
1/8" (3.2 mm) Rounded CAP150LA CAP150LB CAP150RG CAP150RSS CAP150RSP

CAP150RA CAP150RB

2" (50.80 mm) Diameter

½" (12.7 mm) Standard CAP200A CAP200B CAP200G CAP200SS CAP200SP
½" (12.7 mm) Locking CAP200LG CAP200LSS CAP200LSP
CAP200LA CAP200LB

m b s - s t a n d o f f s . c o m-standoffs.com 21

BARRELS Ideal For Multi-Mount
Projects!
5 Finishes — Indoor - Outdoor
CUSTOMIZABLE
STANDOFFS Barrel Tapped Tapped Aluminum Stainless Steel
Height Length Dull Black Brushed Polished
6-32 Gold
¼" 6-32 Thru ¼" Diameter
½" Thru S025-025G
10-24 S025-025A S025-025B S025-050G S025-025S S025-025SP
¼" 10-24 Thru S025-050S S025-050SP
½" 10-24 Thru S025-050A S025-050B N/A
¾" 10-24 Thru S038-050G
1" Thru 3/8" Diameter S038-075G
10-24 S038-100G
½" 10-24 Thru S038-025A S038-025B S038-025S N/A
¾" 10-24 Thru S038-050A S038-050B S050-050G S038-050S S038-050SP
1" 10-24 Thru S038-075A S038-075B S050-075G S038-075S S038-075SP
1½" 10-24 ¾" Both S038-100A S038-100B S050-100G S038-100S S038-100SP
2" 1" Both Ends S050-150G
¼-20 ½" Diameter S050-200G
½" 5/16-18 Thru
½" ¼-20 Thru S050-050A S050-050B S058-05025G S050-050S N/A
¾" 5/16-18 Thru S058-050G S050-075S N/A
¾" ¼-20 Thru S050-075A S050-075B S058-07525G S050-100S N/A
1" 5/16-18 Thru S058-075G S050-150S N/A
1" ¼-20 Thru S050-100A S050-100B S058-10025G S050-200S N/A
1½" 5/16-18 ¾" Both Ends S058-100G
1½" ¼-20 ¾" Both Ends S050-150A S050-150B S058-15025G
2" 5/16-18 1" Both Ends S058-150G
2" ¼-20 1" Both Ends S050-200A S050-200B S058-20025G
3" 5/16-18 1" Both Ends S058-200G
3" 1" Both Ends 5/8" Diameter S058-30025G
¼-20 S058-300G
½" 5/16-18 Thru S058-05025A S058-05025B S058-05025S S058-05025SP
½" ¼-20 Thru S075-05025G S058-050S S058-050SP
¾" 5/16-18 Thru S058-050A S058-050B S075-050G S058-07525S S058-07525SP
¾" ¼-20 Thru S075-07525G S058-075S S058-075SP
1" 5/16-18 Thru S058-07525A S058-07525B S075-075G S058-10025S S058-10025SP
1" ¼-20 Thru S075-10025G S058-100S S058-100SP
1½" 5/16-18 ¾" Both Ends S058-075A S058-075B S075-100G S058-15025S S058-15025SP
1½" ¼-20 ¾" Both Ends S075-15025G S058-150S S058-150SP
2" 5/16-18 1" Both Ends S058-10025A S058-10025B S075-150G S058-20025S S058-20025SP
2" ¼-20 1" Both Ends S075-20025G S058-200S S058-200SP
3" 5/16-18 1" Both Ends S058-100A S058-100B S075-200G S058-30025S S058-30025SP
3" 1" Both Ends S075-30025G S058-300S S058-300SP
S058-15025A S058-15025B S075-300G

S058-150A S058-150B

S058-20025A S058-20025B

S058-200A S058-200B

S058-30025A S058-30025B

S058-300A S058-300B

¾" Diameter

S075-05025A S075-05025B S075-05025S S075-05025SP
S075-050S S075-050SP
S075-050A S075-050B S075-07525S S075-07525SP
S075-075S S075-075SP
S075-07525A S075-07525B S075-10025S S075-10025SP
S075-100S S075-100SP
S075-075A S075-075B S075-15025S S075-15025SP
S075-150S S075-150SP
S075-10025A S075-10025B S075-20025S S075-20025SP
S075-200S S075-200SP
S075-100A S075-100B S075-30025S S075-30025SP
S075-300S
S075-15025A S075-15025B N/A

S075-150A S075-150B

S075-20025A S075-20025B

S075-200A S075-200B

S075-30025A S075-30025B

S075-300A S075-300B

22 1 - 8 1 3 - 9 3 8 - 6 0 2 5 -standoffs.com

BARRELS CUSTOMIZABLE
STANDOFFS
5 Finishes — Indoor - Outdoor

Barrel Tapped Tapped Aluminum Stainless Steel
Height Length Dull Black
¼-20 Gold Brushed Polished
½" ¼-20 Thru
1" ¼-20 Thru 7/8" Diameter S078-05025G S078-05025SS S078-05025SP
1½" ¼-20 ¾" Both S078-10025G S078-10025SS S078-10025SP
2" ¼-20 1" Both Ends S078-05025A S078-05025B S078-15025G S078-15025SS S078-15025SP
3" 1" Both Ends S078-10025A S078-10025B S078-20025G S078-20025SS S078-20025SP
¼-20 S078-15025A S078-15025B S078-30025G S078-30025SS S078-30025SP
½" 5/16-18 Thru S078-20025A S078-20025B
½" ¼-20 Thru S078-30025A S078-30025B S100-05025G
¾" 5/16-18 Thru S100-050G
¾" ¼-20 Thru 1" Diameter
1" 5/16-18 Thru N/A
1" ¼-20 Thru S100-05025A S100-05025B S100-075G S100-05025SS S100-05025SP
1½’ 5/16-18 ¾" Both Ends S100-10025G S100-050SS S100-050SP
1½’ ¼-20 ¾" Both Ends S100-050A S100-050B S100-100G
2" 5/16-18 1" Both Ends S100-15025G N/A N/A
2" ¼-20 1" Both Ends N/A N/A S100-150G S100-075S S100-075SP
3" 5/16-18 1" Both Ends S100-20025G S100-10025SS S100-10025SP
3" 1" Both Ends S100-075A S100-075B S100-200G S100-100SS S100-100SP
5/16-18 S100-30025G S100-15025SS S100-15025SP
¼" 5/16-18 Thru S100-10025A S100-10025B S100-300G S100-150SS S100-1050SP
½" 5/16-18 Thru S100-20025SS S100-20025SP
5/8" 5/16-18 Thru S100-100A S100-100B S125-025G S100-200SS S100-200SP
1" 5/16-18 1" Both Ends S125-050G S100-30025SS S100-30025SP
1½" 5/16-18 1" Both Ends S100-15025A S100-15025B S125-058G S100-300SS S100-300SP
2" 5/16-18 1" Both Ends S125-100G
3" 1" Both Ends S100-150A S100-150B S125-150G
5/16-18 S125-200G
¼" 5/16-18 Thru S100-20025A S100-20025B S125-300G
½" 5/16-18 Thru
1" 5/16-18 Thru S100-200A S100-200B N/A
2" 5/16-18 1" Both Ends S150-050G
3" 1" Both Ends S100-30025A S100-30025B S150-100G
5/16-18 S150-200G
½" 5/16-18 Thru S100-300A S100-300B S150-300G
1" 5/16-18 Thru
2’ 5/16-18 1" Both Ends 1¼" Diameter S200-050G
3" 1" Both Ends S200-100G
S125-025A S125-025B S200-200G S125-025S S125-025SP
S200-300G S125-050S S125-050SP
S125-050A S125-050B S125-058S S125-058SP
S125-100S S125-100SP
S125-058A S125-058B S125-150S S125-150SP
S125-200S S125-200SP
S125-100A S125-100B S125-300SS S125-300SP

S125-150A S125-150B

S125-200A S125-200B

S125-300A S125-300B

1½" Diameter

N/A N/A S150-025S N/A
S150-050S S150-050SP
S150-050A S150-050B S150-100S S150-100SP
S150-200S S150-200SP
S150-100A S150-100B S150-300S S150-300SP

S150-200A S150-200B

S150-300A S150-300B

2" Diameter

S200-050A S200-050B S200-050S S200-050SP
S200-100S S200-100SP
S200-100A S200-100B S200-200S S200-200SP

S200-200A S200-200B N/A N/A

S200-300A S200-300B 23

m b s - s t a n d o f f s . c o m-standoffs.com

CUSTOMIZABLE ALUMINUM SQUARE CAPS AND BARRELS
STANDOFFS
3 Finishes

• Wall Mounted standoffs ALUMINUM FINISHES

• Designed from High Quality of Aluminum Available for all diameters in:

• Caps need your choice of stud

• Don’t forget your combination screws and
anchors (pages: 26-29)

AnCo(lAdeai)zred AnBo(ladBci)zked AnGo(oGdli)dzed

Ideal For Multi-Mount Projects!

24 1 - 8 1 3 - 9 3 8 - 6 0 2 5 -standoffs.com

ALUMINUM SQUARE CAPS AND BARRELS CUSTOMIZABLE
STANDOFFS
3 Finishes

SQUARE CAPS 5/16-18 THREADED

Item # Square Tapped

CAP075SQ ¾" (19 mm) Thru
CAP100SQ 1" (25.4 mm) Thru

Use for Drywall: HB5/16-125 Screw and Anchor ANC6, ANC6Z
Use for Concrete: HB5/16-125 Screw and Anchor ANC2
Hole Diameter to be drilled for your Material: 3/8"

SQUARE BARRELS 5/16-18 THREADED

Item # Square Length Tapped

S075-075SQ ¾" (19 mm) ¾" (19 mm) Thru
S075-100SQ ¾" (19 mm) 1" (25.4 mm) Thru
S100-075SQ 1" (25.4 mm) ¾" (19 mm) Thru
S100-100SQ 1" (25.4 mm) 1" (25.4 mm) Thru

Use for Drywall: HB5/16-125 Screw and Anchor ANC6, ANC6Z
Use for Concrete: HB5/16-125 Screw and Anchor ANC2
Hole Diameter to be drilled for your Material: 3/8"

m b s - s t a n d o f f s . c o m-standoffs.com 25

CUSTOMIZABLE HARDWARE FOR
STANDOFFS CUSTOMIZABLE STANDOFFS

SET SCREW STUDS

Item # Length

#6-32 Thread Size — 1/8" Hole Diameter — 1/16" Allen Key Size

SC6/32-01 ¼"
3/8"
SC6/32-02 ½"
¾"
SC6/32-03 1"

For Caps & Barrels ¼" Diameter SC6/32-04 5/32"
SC6/32-05 ¼"
3/8"
#10-24 Thread Size — 7/32" Hole Diameter— 3/32" Allen Key Size ½"
5/8"
SC10/24-01 ¾"
1"
SC10/24-02 1½"

SC10/24-03 5/16"
3/8"
SC10/24-04 ½"
5/8"
SC10/24-05 ¾"
1"
For Caps & Barrels 3/8", ½" Diameter SC10/24-09 1¼"
SC10/24-06 1½"’
2"
SC10/24-07
5/32"
¼-20 Thread Size — 5/16" Hole Diameter— 1/8" Allen Key Size ¼"
3/8"
SC1/420-03 ½"
5/8"
SC1/420-04 ¾"
7/8"
SC1/420-05 1"
11/8"
SC1/420-06 1¼"
1½"
SC1/420-07 1¾"
2"
SC1/420-08

For Caps & Barrels 5/8", ¾" , 7/8", 1" Diameter SC1/420-09
SC1/420-10

SC1/420-11

5/16-18 Thread Size — 3/8" Hole Diameter— 5/32" Allen Key Size

SC5/16-01

SC5/16-02

SC5/16-03

SC5/16-04

SC5/16-05

SC5/16-06

SC5/16-07

SC5/16-08

SC5/16-09

For Caps & Barrels 5/8", ¾" 1", 1¼", SC5/16-10
1½", 2" Diameter SC5/16-11
SC5/16-12

SC5/16-13

26 1 - 8 1 3 - 9 3 8 - 6 0 2 5 -standoffs.com

HARDWARE FOR CUSTOMIZABLE
CUSTOMIZABLE STANDOFFS STANDOFFS

NYLON WASHERS Item # Inside Outside Thickness
Diameter Diameter
Nylon Washers NW038 0.031"
NW0501024 3/16" 3/8"
NW058025 3/16" ½"
NW075025 ¼" 5/8"
NW078025 ¼" ¾"
NW100025 ¼" 7/8"
¼" 1"
NW050 5/16" ½"
NW058 5/16" 5/8"
NW075 5/16" ¾"
NW078 5/16" 7/8"
NW100 5/16" 1"
NW125 5/16" 1¼"
NW150 5/16" 1½"
NW200 5/16" 2"
NW200 5/16" 2"

PLASTIC TUBING Use plastic tubing to protect your material

For ¼-20 Stud Item # Inside Outside Length
For 5/16-18 Stud Diameter Diameter
PT025250 ¼"
PT025375 ¼" 3/8" 3/8"
PT025500 ¼" 3/8" ½"
PT025750 ¼" 3/8" ¾"
¼" 3/8"
PT250 ¼"
PT375 5/16" 7/16" 3/8"
PT500 5/16" 7/16" ½"
PT750 5/16" 7/16" ¾"
5/16" 7/16"

m b s - s t a n d o f f s . c o m-standoffs.com 27

CUSTOMIZABLE HARDWARE FOR
STANDOFFS CUSTOMIZABLE STANDOFFS

Item # Description Diameter Length For

HB632-05 Zinc Combination Screw #6-32
#6-32
HB632-1 Zinc Combination Screw #6-32 Anchor: ANC1
#6-32 ANC1, ANC5
HB632-12 Zinc Combination Screw 10-24
10-24 ANC5Z
16766 Bit Driv er 10-24
10-24 Combination Screw
HB1024 Zinc Combination Screw 10-24 1"
¼-20
HB1024-1 Zinc Combination Screw ¼-20 Anchor: ANC1
¼-20 1½" ANC1, ANC5
HB1024-2 Zinc Combination Screw ¼-20
ANC5Z1024S Anchor with combination ANC5Z
#6 2"
400.424 screw #6
Bit Driv er #8 Combination Screw
#8
HB1/4-100 Zinc Combination Screw 5/16-18 1"

HB1/4-150 Zinc Combination Screw 5/16-18 1½" Anchor: ANC2,
ANC6, ANC6Z

HB1/4-200 Zinc Combination Screw 2"

16769 Bit Driv er Combination Screw
HB5/16-100 Stainless Steel Combination
HB5/16-100Z 1" (25.4 mm) Anchor: ANC1,
HB5/16-125 Screw 1" (25.4 mm) ANC5, ANC5Z
HB5/16-125Z Zinc Combination Screw 1¼" (32 mm) Anchor: ANC1,
Stainless Steel Combination 1¼" (32 mm) ANC5, ANC5Z
ANC5ZS Anchor: ANC2,
HEXBIT5/32 Screw ANC6, ANC6Z
Zinc Combination Screw Anchor: ANC2,
ANC6ZS Zinc Anchor with Combina- ANC6, ANC6Z
HEXBIT1/8 tion Screw HB5/16-100
Combination Screw
Hex head Insert Bit 1/8"
Zinc Anchor with Combina- Combination Screw

tion Screw HB5/16-125
Hex head Insert Bit 1/8"

28 1 - 8 1 3 - 9 3 8 - 6 0 2 5 -standoffs.com

HARDWARE FOR CUSTOMIZABLE
CUSTOMIZABLE STANDOFFS STANDOFFS

For Drywall and Concrete

Item # Description Diameter Length For

ANC1 Plastic Anchor for concrete #6 For screw: #6
ANC2 Drill size ¼" #8 For screw: #8
ANC5 #6 For screw: #6
ANC5Z Plastic Anchor for concrete #6 For screw: #6
ANC6 Drill size ¼" #8 For screw: #8
ANC6Z #8 For screw: #8
TBW9 Plastic Anchor Pre-drill
TBW9K for Drywall 9/16" Anchor: TBW9
HB5/16-200 Zinc Anchor Anchor: TBW8
TBW8 for Drywall
For screw:
Plastic Anchor HB5/16-200
for Drywall
Zinc Anchor
for Drywall

Nylon Toggle Wings

Nylon Toggle Tool

Combination Screw 5/16-18 to #8-32 2" (50.40 mm)
Spring Toggle Wings Pre-drill
9/16"

Anchor Wall 1. Insert Anchor in wall
Your Material 2. Add the combination screw to
Hanger
bolt anchor
3. Screw barrel onto combination
Barrel
Washer screw
4. Screw stud in barrel and add one
Stud
Tubing washer
Washer 5. Place your material on the studs

Cap and add another washer
6. Screw cap onto stud
7. Take cap/stud, go through

washers, material and screw into
barrel

Anchor Datasheet weight
limits available on our website

or upon request to Certified Sales
Reps

m b s - s t a n d o f f s . c o m-standoffs.com 29

CUSTOMIZABLE HARDWARE FOR
STANDOFFS CUSTOMIZABLE STANDOFFS

MACHINE SCREWS Length

Item #

10/24 Thread Phillips Pan Head Machine Screw

9241 ¼"

9242 5/16"

1561 3/8"

1562 ½"

1563 5/8"

1564 ¾"

1565 1"

1566 1 ½"

1567 1 ½"

¼-20 Thread Phillips Pan Head Machine Screw

1584 ½"

1586 ¾"

1587 1"

5/16-18 Thread Phillips Pan Head Machine Screw

9284 ¾"

9285 7/8"

9286 1"

9287 1¼"

9288 1½"

30 1 - 8 1 3 - 9 3 8 - 6 0 2 5 -standoffs.com

TOOLS FOR CUSTOMIZABLE STANDOFFS CUSTOMIZABLE
STANDOFFS

Anchor Wall 1. Insert Anchor in wall
Your Material 2. Add the combination screw to
Hanger
bolt anchor
3. Screw barrel onto combination
Barrel
Washer screw
4. Screw stud in barrel and add one
Stud
Tubing washer
Washer 5. Place your material on the studs

Cap and add another washer
6. Screw cap onto stud
7. Take cap/stud, go threw washers,

material and screw into barrel

TOOLS

Item # Description For

400.430 M4 Hex Screw Driver For all standoffs with M4 Set
ALLENK5/32 Special for Standoffs Screw
ALLENK1/8
Allen Key 5/32’’ All of 5/16 Stud
16766 Allen Key 1/8’’ Hanger Bolt HB5/16-100,
400.424 HB5/16-100Z, HB5/16-125,
16769 Bit Driver
HEXBIT1/8 HB5/16-125Z
HEXBIT5/32 HB632 Screws

LS01 Bit Driver HB1024 Screws
TG01
Bit Driver HB1/4-100 & HB1/4-150
Hex Head Insert Bit 1/8’’ Hanger bolt HB5/16-100,
Hex Head Insert Bit 5/32’’
HB5/16-100Z,
Locking Cap Tool Hanger bolt HB5/16-125,
Thread Glue
HB5/16-125Z
For aluminum and Stainless

Steel locking Caps
All of the stud to lock in place

m b s - s t a n d o f f s . c o m-standoffs.com 31

EDGE GRIP ADJUSTABLE EDGE GRIP STANDOFFS
STANDOFFS
6 Finishes — For Indoor Use for Stainless Steel, Indoor and Outdoor for Aluminum

No Material Drilling
Needed!

4 Edge 3 Edge 2 Edge
Grip Grip Grip

4 Edge 3 Edge 2 Edge
Grip Grip Grip

See Screw and Anchor pages: 58 - 59 1-813-938-6025 -standoffs.com

32

ADJUSTABLE EDGE GRIP STANDOFFS

6 Finishes

Standoff Thick. Material Item # Alum(Ain) um AShluinmyin(AuSm) EDGE GRIP
STANDOFFS
½" (12.7 mm) ½" Diameter EG050-050
¾" (19 mm) EG050-075 AnoBdliazcekd (B) AnoGdiozledd (G)
1" (25.4 mm) ¼" EG050-100
1½" (38 mm) 3/8" EG050-150 SSSaBtriuns(hSe)d SS Po(Pli)shed
2" (50.8 mm) 3/8" EG050-200
½" Use for Drywall:
½" (12.7 mm) ½" EG058-050 For ½" & 5/8" diameter 2208 Screw and
¾" (19 mm) EG058-075 Anchor ANC1
1" (25.4 mm) 5/8" Diameter EG058-100 For ¾", 7/8", 1", 1¼" & 1½" 2216 diameter
1½" (38 mm) EG058-150 2216 Screw and Anchor ANC2
2" (50.8 mm) ¼" EG058-200
3/8" Use for Concrete:
½" (12.7 mm) 3/8" EG075-050 For ½" & 5/8" diameter 2208 Screw and
¾" (19 mm) ½" EG075-075 Anchor ANC1
1" (25.4 mm) ½" EG075-100 For ¾", 7/8", 1", 1¼" & 1½" 2216 diameter
1½" (38 mm) EG075-150 2216 Screw and Anchor ANC2
2" (50.8 mm) ¾" Diameter EG075-200

½" (12.7 mm) ¼" EG087-050
¾" (19 mm) 3/8" EG087-075
1" (25.4 mm) ½" EG087-100
1½" (38 mm) ½" EG087-150
2" (50.8 mm) ½" EG087-200

½" (12.7 mm) 7/8" Diameter EG100-050
¾" (19 mm) EG100-075
1" (25.4 mm) ¼" EG100-100
1½" (38 mm) 3/8" EG100-150
2" (50.8 mm) ½" EG100-200
½"
½" (12.7 mm) ½" EG125-050
¾" (19 mm) EG125-075
1" (25.4 mm) 1" Diameter EG125-100
1½" (38 mm) EG125-150
2" (50.8 mm) ¼" EG125-200
3/8"
½" (12.7 mm) ½" EG150-050
¾" (19 mm) ½" EG150-075
1" (25.4 mm) ½" EG150-100
1½" (38 mm) EG150-150
2" (50.8 mm) 1¼" Diameter EG150-200

¼"
3/8"
½"
½"
½"

1½" Diameter

¼"
3/8"
½"
½"
½"

m b s - s t a n d o f f s . c o m-standoffs.com 33

STAINLESS STEEL EDGE GRIP STANDOFFS

For Indoor Use

EDGE GRIP
STANDOFFS

4 x 105.025 4 x 105.025
and and

4 x 105.026 6 x 105.026

No Material Drilling 4 x 105.015 3 x 105.015 2 x 105.015
Needed! or or or

• Wall mounted Edge Grip Standoffs. 4 x 105.025 3 x 105.025 2 x 105.025
• Designed from high quality

Stainless Steel.
• Designed for flat material signs.
• No drilling needed!

4x 105.015 3 x 105.015 2 x 105.015
or or or

4 x 105.025 3 x 105.025 2 x 105.025

See Screw and Anchor pages: 58 - 59 1-813-938-6025 -standoffs.com

* Glass not included. Images for example only

34

STAINLESS STEEL EDGE GRIP STANDOFFS
1

For Indoor Use

3

3

9/16" (15 mm) DIAMETER 2 EDGE GRIP
STANDOFFS
Item # Standoff Mounting A 0.33in 0.30in
Diameter 8.50mm 7.50mm
105.015 9/16" (15 mm) 0.98in Glass Thickness
None 25mm 2 x 4mm or 1
1 x 8mm
Use for Drywall: 2208 Screw and Anchor ANC5, ANC5Z A
M4 Set Screw
Use for Concrete: 2208 Screw and Anchor ANC1 0.59in
15mm M4 Set Screw 0.16in
Thickness of material accepted 2 @ 3/16" or 1 @ 6/16" 3 4.10mm
(2 @ 4 mm or 8 mm)

2SECTION A-A

1" (25.4 mm) DIAMETER 0.16in 0.40in
4.10mm
Mounting Item10.0Q5tmy.m Description
Diameter A
Item # Standoff 1 1 105.015 Body

105.025 9/16" (15 mm) NonTeitle 0.98in 0.33in 2 1 105.015 Support
8.50mm 3 3 M4x4mm Set Screw
2:5m1m05.015 Mbs R&D
Scale : 1:1

Use for Drywall: 2216 Screw and Anchor ANC6, ANC6Z Material: Sizes : Letter Portrait Customer: 0.24in
Use for Concrete: 2216 Screw and Anchor ANC2 N°programme laser Finish
MBS Sign USA Qty : R6.e1p0m: m
N°prog. Mécanum.
ATel.: 352-593-4151 N° Plan : 105.0151

Fax: 352-796-4437
Brooksville, FL

Thickness of material accepted 2 @ 3/16" or 1 @ 5/16" 0.98inCe document et le produit cité en réference sont la propriété exclusive de MBS Sign, ils ne peuventêtre utilisé, reproduits, communiqués ou divulgués sans autorisation préalable
(2 @ 4 mm or 8 mm) 25mm

3

2

1" (25.4 mm) DIAMETER 0.24in Item Qty. Description
DOUBLE CHANNEL 6.10mm

1 1 105.025 Body

AMoTuitlent: in1g05.025 2 1 0.4100i5n.025 Support
3 210.0M54mxm4mm Set Screw

Scale : 1:1 Mbs R&D

Item # Standoff Diameter Sizes : Letter Portrait Customer:

105.026 9/16" (15 mm) MBS Sign USA Material: Finish 0.33in Qty : Rep :
8.50mm
None 0.98inTel.: 352-593-4151 N°programme laser N°prog. Mécanum.
N° Plan : 105.025
Fax: 352-796-4437

25mmBrooksville, FL

Ce document et le produit cité en réference sont la propriété exclusive de MBS Sign, ils ne peuventêtre utilisé, reproduits, communiqués ou divulgués sans autorisation préalable

Use for Drywall: 2216 Screw and Anchor ANC6, ANC6Z A 0.24in
6.10mm
Use for Concrete: 2216 Screw and Anchor ANC2 0.98in
25mm
Thickness of material accepted 2 @ 3/16" or 1 @ 5/16"
(2 @ 4 mm or 8 mm)

0.24in Item Qty. Description
6.10mm 1
2
m b s - s t a n d o f f s . c o m-standoffs.com 3 1 105.026 Body 35
1 105.026 Support

2 M4x4mm Set Screw

STAINLESS STEEL SCREW COVERS

SCREW COVER
KNOBS

• Designed from High Quality Stainless Steel & Aluminum.
• Designed for Flat Material Signs.

SET OF 4 SCREW COVERS 1-813-938-6025 -standoffs.com

• 6 Different Diameters
• 6 Different Finishes
• High Quality Aluminum & Stainless Steel
• For Indoor or Outdoor
• Includes: Threaded Brass Insert,
• Easy To Use
• Flush Mount
See Screw and Anchor pages: 58 - 59

36

STAINLESS STEEL SCREW COVERS

Set of 4 Screw Covers

SC12SSS ½" Diameter Alum(Ain) um
SC12SS304 AShluinmyin(AuSm)
SC12A Stainless Steel Brushed (indoor) AnoBdliazcekd (B)
SC12AS Stainless Steel Brushed (indoor/outdoor) AnoGdiozledd (G)
SC12B SSSaBtriuns(hSe)d
SC12G Aluminum Brushed (indoor/outdoor)
Aluminum Shiny (indoor/outdoor)
Aluminum Black (indoor/outdoor)
Aluminum Gold (indoor/outdoor)

SC16SSS 5/8" Diameter SCREW COVER
SC16SS304 KNOBS
SC16A Stainless Steel Brushed (indoor)
SC16AS Stainless Steel Brushed (indoor/outdoor)
SC16B
SC16G Aluminum Brushed (indoor/outdoor)
Aluminum Shiny (indoor/outdoor)
Aluminum Black (indoor/outdoor)
Aluminum Gold (indoor/outdoor)

SC18SSS ¾" Diameter
SC18SS304
SC18A Stainless Steel Brushed (indoor)
SC18AS Stainless Steel Brushed (outdoor)
SC18B Aluminum Brushed (indoor/outdoor)
SC18G Aluminum Shiny (indoor/outdoor)
Aluminum Black (indoor/outdoor)
Aluminum Gold (indoor/outdoor)

SC20SSS 13/16" Diameter
SC20SS304
SC20A Stainless Steel Brushed (indoor)
SC20AS Stainless Steel Brushed (indoor/outdoor)
SC20B
SC20G Aluminum Brushed (indoor/outdoor)
Aluminum Shiny (indoor/outdoor)
Aluminum Black (indoor/outdoor)
Aluminum Gold (indoor/outdoor)

SC22SSS 7/8" Diameter
SC22SS304
SC22A Stainless Steel Brushed (indoor)
SC22AS Stainless Steel Brushed (indoor/outdoor)
SC22B
SC22G Aluminum Brushed (indoor/outdoor)
Aluminum Shiny (indoor/outdoor)
Aluminum Black (indoor/outdoor)
Aluminum Gold (indoor/outdoor)

SC25SSS 1" Diameter
SC25SS304
SC25A Stainless Steel Brushed (indoor)
SC25AS Stainless Steel Brushed (indoor/outdoor)
SC25B
SC25G Aluminum Brushed (indoor/outdoor)
Aluminum Shiny (indoor/outdoor)
Aluminum Black (indoor/outdoor)
Aluminum Gold (indoor/outdoor)

Use for Drywall: 2208 Screw and Anchor ANC5
Use for Concrete: 2208 Screw and Anchor ANC1

m b s - s t a n d o f f s . c o m-standoffs.com 37

STAINLESS STEEL 6
PROJECTING WALL MOUNT
1

¾" (20 mm) DIAMETER M4 Thread 0.24in 0.67in 0.95in
6mm 16.97mm 24.10mm

B

Item # Mounting Diameter 0.81in
20.50mm

PROJECTING 100.322 3/8" (10 mm)
GRIPPERS
Designed from high quality Stainless M4 Set Screw B 0.59in
Steel. 15mm
0.71in
Designed for flat material signs. 18mm

Use for Drywall: 2216 Screw and 0.18in
Anchor ANC6, ANC6Z 4.60mm

Use for Concrete: 2216 Screw and
Anchor ANC2

Thickness of material accepted
¼" (6 mm)

Item Qty. Descr

1 1 100.322 Body

2 1 100.322 Head A

0.65in 3 1 100.322 Head B
16.48mm
¾" (20 mm) DIAMETER Material 4 2 100.322 Gasket
A Thickness 5 1 M4x5mm Set Screw
6 1 M4x14mm Allen Key
1.38in 0.39in
35mm Scale : 1:1 Mbs R&D
Title : 101m0m0.322
Mounting A Sizes :Letter Landscape Customer:
Item # Diameter Holds
MBS Sign USA Material: Finish Qty :
100.206 Tel.: 352-593-4151 N°programme laser N°prog. Mécanum. N° Plan : 10
Fax: 352-796-4437
3/8" (10 mm) 3/8" (10 mm) Brooksville, FL

0.37in 1.77inCe document et le produit cité en réference sont la propriété exclusive de MBS Sign, ils ne peuventêtre utilisé, reproduits, communiqués ou divulgué
9.40mm 45mm

Use for Drywall: 2216 Screw and 0.17in
Anchor ANC6, ANC6Z 4.20mm

Use for Concrete: 2216 Screw and 0.79in
Anchor ANC2 20mm

Thickness of material accepted
3/8" (10 mm)

Item Qty. Description
1
2 1 100.206 Body
3
2 100.206 Washer
Scale : 1:1
1 M4x16mm Set Screw
Sizes : Letter Portrait
Title : 100.206 Finish Mbs R&D

MBS Sign USA N°prog. Mécanum. Customer:
Tel.: 352-593-4151
Fax: 352-796-4437 Material: Qty : Rep :
Brooksville, FL N°programme laser
N° Plan : 100.206

Ce document et le produit cité en réference sont la propriété exclusive de MBS Sign, ils ne peuventêtre utilisé, reproduits, communiqués ou divulgués sans autorisation préalable

See Screw and Anchor pages: 58 - 59

38 1 - 8 1 3 - 9 3 8 - 6 0 2 5 -standoffs.com

ALUMINUM
PROJECTING WALL MOUNT

7/8" & 1" DIAMETER (22 & 25.4 mm)

Set Screw

Alum(Ain) um AShluinmyin(AuSm) J Black AnoGdiozledd (G)K Material
Accepted
Item # Mounting Anodized (B) Diameter
Diameter Set Screw

Set Screw

Thickness
Material Accepted
0.98in 0.98in
PS250 None 24.98mm¼" (6.35 mm) 7/8" (22 mm) 25mm 0.55in
14.04mm
PS375 None 1.38in Set Screw
35mm

PROJECTING &
SUSPENDED
3/8" (9.52 mm) 7/8" (22 mm) K

PS500 None ½5"/1(162-1.78 mm) 1" (25.4 mm) 5/16-18
PSW100 Washer 1" (25.4 mm) Threaded
J Threaded
Washer PSW100

Use for Drywall: HB5/16-100 Hanger Bolt andSAEnCcThIoOrNANJC-J5, ANC5Z or Set SECTION K-K
ANC5ZS

Use for Concrete: HB5/16-100 Hanger Bolt and AncThiotler:A10N2C.1004 Scale : 1:1 Mbs R&D

Sizes : Letter Landscape Customer:

Mbs USA Material: SS201 Finish: Brushed Qty : Rep :

6420 Benjamin Rd

¾", 7/8", 1" & 1¼" DIAMETER (19, 22, 25.4 & 31 mm)Tampa,FL33634
T: 813-938-6025
N°programme laser N°prog. Mécanum. N° Plan : PS375 for catalog

Ce document et le produit cité en réference sont la propriété exclusive de MBS Sign, ils ne peuventêtre utilisé, reproduits, communiqués ou divulgués sans autorisation préalable

Alum(Ain) um AShluinmyin(AuSm) AnoBdliazcekd (B) AnoGdiozledd (G)

Item # Mounting Thickness J Material
Diameter Material Accepted Set Screw Accepted
Diameter

PGS250 3/16" (4.7 mm) ¼" (6.35 mm) ¾" (9.52 mm)

PGS375 3/16" (4.7 mm) 3/8" (9.52 mm) ¾" (9.52 mm) 0.98in
24.98mm
PGS500 3/16" (4.7 mm) ½" (12.7 mm) 1" (25.4 mm)
1.38in
35mm

PGS750 3/16" (4.7 mm) ¾" (19.05 mm) 1¼" (31.70 mm)

PSW100 Washer Washer 1" (25.4 mm) 5/16-18
J Threaded
Use for Drywall: HB5/16-100 Hanger Bolt and Anchor ANC5, ANC5Z or Set ANC5ZS
SECTION J-J
Use for Concrete: HB5/16-100 Hanger Bolt and Anchor ANC1

See Screw and Anchor pages: 58 - 59

mbs-standoffs.com Title :102.004 Scale : 1:1 Mbs R&D 39

-standoffs.com Mbs USA Sizes : Letter Landscape Customer:
6420 Benjamin Rd
Tampa, FL 33634 Material: SS201 Finish: Brushed Qty : Rep :
T: 813-938-6025 N°programme laser
N°prog. Mécanum. N° Plan : PGS250 for catalog

STAINLESS STEEL PROJECTING

Item # Mounting
100.320 Diameter

3/8" (10 mm)

• Wall mounted Side Standoffs.
• Designed from high quality Stainless Steel.
• Designed for flat material signs.
Use for Drywall: 2216 Screw and Anchor ANC6, ANC6Z
Use for Concrete: 2216 Screw and Anchor ANC2
Thickness of material accepted 2 @ 3/16" or 1 @ 5/16" (2 @ 4 mm or 8 mm)

PROJECTING &
SUSPENDED

0.59in
15mm
0.92in
23.44mm
STAINLESS STEEL PROJECTING WALL MOUNT ROUNDED

• Wall mounted Side Standoffs. 0.34in
• Designed from high quality Stainless Steel. 8.52mm
• Designed for flat material signs.
Use for Drywall: 2216 Screw and Anchor ANC6, ANC6Z M4 Set Screw
Use for Concrete: 2216 Screw and Anchor ANC2
Thickness of material accepted Up to 5/16" (Up to 8.5 mm)

Item # Diameter 0.18in
4.60mm
100.154 13/16" (30 mm)

Title : 100.154

See Screw and Anchor pages: 58 - 59 MBS Sign USA Material: SS304
Tel.: 352-593-4151 N°programme laser
40 Fax: 352-796-4437
Brooksville, FL

Ce document et le produit cité en réference sont la propriété exclusive

1-813-938-6025 -standoffs.com

STAINLESS STEEL FLAG SIGN

For Indoor Use

• Flag Sign Includes:
• 2 Glasses 7 1/16" (180 mm) x 7 1/16" (180 mm) x 3/16" (4 mm)
• High Grade Stainless Steel Round Bar
• 2 point with wall Attachement
• Art and Harware Not Included
• For Indoor Use
Use for Drywall: 2216 Screw and Anchor ANC6, ANC6Z
Use for Concrete: 2216 Screw and Anchor ANC2

Item # 160.304

PROJECTING &
SUSPENDED

½ " (12 mm) DIAMETER DOUBLE SIDED
STAINLESS STEEL SCREW

Item # Mounting Head
Diameter
100.020 Flat
3/8" (10 mm)

Thickness of material accepted 2 @ 3/16" or 1 @ 5/16"
(2 @ 4 mm or 8 mm)

m b s - s t a n d o f f s . c o m-standoffs.com 41

SUSPENDED SYSTEM

ANC1

Alum(Ain) um 2208
100.268
100.269 100.383
100.385
PROJECTING & • Ceiling Mounted glass holder AluS(mhAiiSnn)yum 100.267
SUSPENDED • Designed from high quality 100.287
• Stainless steel for hanging signs AluBm(laBicn)kum 100.207
• Socket head cap screw to attach cable StSa(tinSe)leelss 2
• Maximum Width between each cable 24" 3 AluGm(oGiln)dum
Use for Drywall: 2208 Screw and Anchor ANC5, ANC5Z
Use for Concrete: 2208 Screw and Anchor ANC1

5/8" (16 mm) DIAMETER, 1
"Ceilling Mounting"
1
0.10in
2.55mm 3

Item # 100.268

5/8" (16 mm) DIAMETER 0.10in 5/8" (16 mm) Diameter
"Hangin0.6g3inFork" 2.55mm ‘Hang0.5i6nin g Fork Link"

16mm 14.25mm

A A 0.25in
6mm

1.77in 1.06in 0.37in 1.00in
45mm 27mm 9.40mm 25mm

A 0.25in 2.26in 1.00in
6mm 57.50mm 25mm
0.56in Material
14.21mm Thickness A 0.63in
16mm

Item # Mounting Thickness of Item # Mounting Thickness of
Diameter material accepted Diameter Item mQattye. rial accDeepstceridption

100.267 3/8" (10 mmIt)em Qty. ¼" (6 Dmemsc) ription 100.269 3/8" (10 mm) 1 1 ¼1"0(06.2m6m9 )Body
11/16" (18 mm)21
¾" (20 mm) 3 1 2 4 100.206 Washer

Scale : 1:1 2
Sizes : Letter Portrait
100.2692
100.287 Finish 1M100345/008/1x"6..1"22(1006(80m67mmmWBmomaSd)s)TeyhittelSerc:rew 3 2 M4x10mm Set Screw
Mbs R&D
100.207 N°prog. Mécanum. Scale : 1:1

Title : 14020.267 Material: Mbs R&D Sizes : Letter Portrait Customer:
N°programme laser Finish
MBS Sign USA 1 - 8 1 3 - 9 3 8 - 6 0 2 5Customer:
Tel.: 352-593-4151 MBS Sign USA Material: Qty : Rep :
Fax: 352-796-4437 Tel.: 352-593-4151 -standoffs.com

Fax: 352-796-4437 N°programme laser N°prog. Mécanum. N° Plan : 100.269
Brooksville, FL
Qty : Rep :

Ce document et le produit cité en réference sont la propriété exclusive de MBS Sign, ils ne peuventêtre utilisé, reproduits, communiqués ou divulgués sans autorisation préalable

SUSPENDED SYSTEM

SUSPENDED KIT

Kit Includes: 2 Ceiling mounting, 2 Cable and 2 Forks
Use for Drywall: 2208 Screw and Anchor ANC5, ANC5Z
Use for Concrete: 2208 Screw and Anchor ANC1
Thickness of material accepted ¼" (7 mm)
Item # SUSKIT1

Automatic PROJECTING &
cable SUSPENDED

Mechanism

CABLE Stainless Steel Cable

Item # Stainless Steel Cable Diameter: 1/16" (2 mm) Length 9’ (3 m) Maximum weight supported: 55 lbs (25 kg)
Stainless Steel Cable Diameter: 1/16" (2 mm) Length 16’ (5 m) Maximum weight supported: 55 lbs (25 kg)
100.383
100.385

ACCESSORIES

For use with Use tclamp to attach to drop
Drop Ceilling ceiling. Then flip hanging fork
upside down to attach to tclamp.
Item # tclamp
Item # CABLECUTTER

See Screw and Anchor pages: 58 - 59

m b s - s t a n d o f f s . c o m-standoffs.com 43

HOOKS FOR STAINLESS STEEL
AND NYLON CABLE

SELF-GRIPPING 3/8’’

Brass φ10

For use with: Ball End, Cobra Cable, “J” Hook Cable, 36 1 7/16’’
“P” Hook Cable

For Cable Diameter: 3/64’’ (1.2 mm) to 1/16’’ (1.5 mm)

Rated Strength: 15 Lbs (6 Kg)

For: Classic Rail, Ceiling Rail

H104-NK Nickel Plating 5
H104-CP Polished 4
1
SELF-GRIPPING M4 Thread 1 1
3/16" 2
Brass 4mm
6
1/16"
PROJECTING & 3/16" 2mm 3
SUSPENDED 4mm
For use with: Ball End, Cobra Cable, “J” Hook Cable, “
P” Hook Cable 1 1/2" 1/4" 7/8"
38,4mm 6,3mm 22mm
For Cable Diameter: 3/64’’ (1.2 mm) to 1/16’’ (1.5 mm) 15/16" 1/4"
24mm 6mm
Rated Strength: 15 Lbs (6 Kg) 7/16"
11mm
For: Classic Rail, Ceiling Rail
3/16" M8 Thread ITEM PART NUMBER DESCRIPTION QTY.
4mm NO.
1/2" 5/16" 3
12mm 1 HK-0007-CP ball 2mm 1
1
8mm 2 HK-0007-CP bodu
3 HK-0007-CP front cap 1
13/16" 1
H105-NK Nickel Plating 20mm 4 HK-0007-CP middle 1
H105-CP Polished
5 HK-0007-CP nut
6 HK-0007-CP spring

Scale : 1.5:1

Sizes :

N° Plan : HK-0007-CP
This document and the product mentioned in Reference are the exclusive property of MBS-Standoffs, they can not be used, reproduced, disclosed or disclosed without prior authorization

SELF-GRIPPING 1/4" 7/16" M10 Thread 3 4
6mm 10,5mm 2 2
Zinc 3/8" 2
3/16" 10,1mm 1/16" 5
For use with: Ball End, Cobra Cable, “J” Hook Cable, 4mm
“P” Hook Cable 2mm
For Cable Diameter: 3/64’’ (1.2 mm) to 1/16’’ (1.5 mm)
Rated Strength: 15 Lbs (6 Kg) 1
For: Classic Rail, Ceiling Rail
9/16" 1/8" 3/8"
14mm 3mm 10mm
3/4"
19mm

ITEM PART NUMBER DESCRIPTION QTY.
NO.
R21m/1m6" 1
H103-NK Nickel Plating 1 HK-0005-CP body
H103-CP Polished 3
3R/98m" m 2 HK-0005-CP ball 1
1
3 HK-0005-CP middle 1

4 HK-0005-CP screw

5 HK-0005-CP spring

Scale : 1.5:1

Sizes :

Mbs Standoffs

SELF-GRIPPING N° Plan : HK-005-CP
This document and the product mentioned in Reference are the exclusive property of MBS-Standoffs, they can not be used, reproduced, disclosed or disclosed without prior authorization
Brass
1/2’’
Finish: Nickel Plating φ12
For use with: Ball End, Cobra Cable, “J” Hook Cable,
“P” Hook Cable 60 2 3/8’’
For Cable Diameter: 3/64’’ (1.2 mm) to 1/16’’ (1.5 mm)
Rated Strength: 15 Lbs (6 Kg)
For: Classic Rail, Ceiling Rail

Item #: SGH100

44 1 - 8 1 3 - 9 3 8 - 6 0 2 5 -standoffs.com

HOOKS FOR STAINLESS STEEL
AND NYLON CABLE

SELF-GRIPPING

Brass

Finish: Nickel Plating
For use with: Ball End, Cobra Cable, “J” Hook Cable,
“P” Hook Cable
For Cable Diameter: 3/64’’ (1.2 mm) to 1/16’’ (1.5 mm)
Rated Strength: 15 Lbs (6 Kg)
For: Classic Rail, Ceiling Rail

Item#: GH0012

SELF-GRIPPING PROJECTING &
SUSPENDED
Brass

Finish: Nickel Plating

For use with: Ball End, Cobra Cable, “J” Hook Cable,
“P” Hook Cable

For Cable Diameter: 3/64’’ (1.2 mm) to 1/16’’ (1.5 mm) N° Plan : AL12-12

Rated Strength: 15 Lbs (6 Kg) This document and the product mentioned in Reference are the exclusive property of MBS-Standoffs, they can not be used, reproduced, disclosed or disclosed without prior authorization

For: Classic Rail, Ceiling Rail

Item#: GH0013

SELF-GRIPPING

Brass

Finish: Nickel Plating

For use with: Ball End, Cobra Cable, “J” Hook Cable,

“P” Hook Cable N° Plan : AL12-12

For Cable Diameter: 3/64’’ (1.2 mm) to 1/16’’ (1.5 mm)
This document and the product mentioned in Reference are the exclusive property of MBS-Standoffs, they can not be used, reproduced, disclosed or disclosed without prior authorization

Rated Strength: 15 Lbs (6 Kg)

For: Classic Rail, Ceiling Rail

Item#: GH0014

SELF-GRIPPING

Brass

Finish: Nickel Plating

For use with: Ball End, Cobra Cable, “J” Hook Cable,
“P” Hook Cable

For Cable Diameter: 3/64’’ (1.2 mm) to 1/16’’ (1.5 mm)

Rated Strength: 15 Lbs (6 Kg) N° Plan : AL12-12
For: Classic Rail, Ceiling Rail
This document and the product mentioned in Reference are the exclusive property of MBS-Standoffs, they can not be used, reproduced, disclosed or disclosed without prior authorization

SKU: GH0015

m b s - s t a n d o f f s . c o m-standoffs.com 45

HOOKS FOR STAINLESS STEEL 2
AND NYLON CABLE

SCREW GRIPPING 1/4" 1/4" 1
6mm 6mm 1/8"
Brass
3,5mm
Finish: Nickel Plating
For use with: Ball End, Cobra Cable, “J” Hook Cable, 1 1/4" 7/8" M4 Thread
“P” Hook Cable 32mm 22,7mm 3/16"
For Cable Diameter: 3/64’’ (1.2 mm) to 1/16’’ (1.5 mm) 5/8" 4mm
Rated Strength: 15 Lbs (6 Kg) 15,6mm 5/8"
For: Classic Rail, Ceiling Rail 16mm
R1,51/m16m"
Item#: H100 7/16"
11,5mm
SCREW GRIPPING
R3,81/m8"m 3/8" 1/8" ITEM PART NUMBER DESCRIPTION QTY.
Aluminum 9,8mm 2,7mm NO.
1
Finish: Nickel Plating 1 HK-0001-CP body 1
For use with: Ball End, Cobra Cable, “J” Hook Cable,
“P” Hook Cable 2 HK-0001-CP screw
For Cable Diameter: 3/64’’ (1.2 mm) to 1/16’’ (1.5 mm)
Rated Strength: 15 Lbs (6 Kg) Scale : 2:1
For: Classic Rail, Ceiling Rail
Sizes :
Item#: H101
Mbs Standoffs

N° Plan : HK-0001-CP
This document and the product mentioned in Reference are the exclusive property of MBS-Standoffs, they can not be used, reproduced, disclosed or disclosed without prior authorization

PROJECTING & 20 3/4’’
SUSPENDED 5/81.56’’

LOOPER FOR NYLON CABLE 3/4’’
18.8
Locking Looper — Aluminum
17.5 11/16’’
Finish: Clear Anodized
For Cable Diameter: 1/16’’ (2 mm)
Rated Strength: 15 Lbs (6 Kg)

Item#: DG005

CABLE TENSIONER 5/16’’
φ8.3
Spring 7/8’’22

Application: Cable Tensioner 2 3/16’’ 55
Item#: TSS100 1φ/11.56’’

46 1 - 8 1 3 - 9 3 8 - 6 0 2 5 -standoffs.com