SUNTEX SS304 repair clamps
code: STR-SRP
band/Lug plate/C-counter/Boltings: SS 304/316, Gasket: EPDM/NBR
size O.D.range: mm Length boltings
45-55 150 M16X2
48-56 200 M16X2
1.5" 45-55 300 M16X3
150 M16X2
191 M16X2
2" 60-67 200 M16X2
250 M16X3
300 M16X3
150 M16X2
191 M16X2
2.5" 70-80 200 M16X2
250 M16X3
300 M16X3
150 M16X2
191 M16X2
88-98 200 M16X2
250 M16X3
300 M16X3
3" 150 M16X2
191 M16X2
95-105 200 M16X2
250 M16X3
300 M16X3
500 M16X5
150 M16X2
191 M16X2
108-118 200 M16X2
250 M16X3
300 M16X3
4" 400 M16X4
150 M16X2
191 M16X2
115-128 200 M16X2
250 M16X3
300 M16X3
400 M16X4
150 M16X2
191 M16X2
130-145 200 M16X2
250 M16X3
5" 300 M16X3
150 M16X2
191 M16X2
140-155 200 M16X2
250 M16X3
300 M16X3
150 M16X2
www.australianminingservices.com.au 191 M16X2 Page 33
200 M16X2
158-172 250 M16X3
300 M16X3
400 M16X4
500 M16X5
6" 600 M16X6
150 M16X2
191 M16X2
200 M16X2
168-182 250 M16X3
300 M16X3
400 M16X4
500 M16X5
600 M16X6
191 M16X2
200 M16X2
180-193 250 M16X3
300 M16X3
7"
191 M16X2
190-203 200 M16X2
300 M16X3
600 M16X6
191 M16X2
200 M16X2
8" 217-229 300 M16X3
400 M16X4
500 M16X5
600 M16X6
200 M16X2
300 M16X3
9" 225-240 400 M16X4
500 M16X5
600 M16X6
191 M16X2
200 M16X2
10" 243-260 300 M16X3
400 M16X4
500 M16X5
600 M16X6
191 M16X2
200 M16X2
11" 270-280 300 M16X3
400 M16X4
500 M16X5
600 M16X6
290-310 500 M16X5
300 M16X3
313-336 400 M16X4
12" 500 M16X5
600 M16X6
300 M16X3
340-360
500 M16X5
* Double band /Triple band available upon request
www.australianminingservices.com.au Page 34
STAINLESS STEEL REPAIR COUPLING
MODEL: ST-R
MODEL: ST-RL
MATERIALS COMPOSITION
SERIAL PART NAME MATERIALS STANDARD
1 SHELL SS304/316
2 LUG BAR SS304/316
3 BOLTINGS SS304/316
4 GASKET EPDM/NBR
APPLICATION INSTRUCTION:
STEP 1 STEP 2 STEP 3
STEP 4 STEP 5 STEP 6
www.australianminingservices.com.au Page 35
STEP 1 REMOVE THE BURS AND CLEAN THE SURFACE NEAR BREAKAGE OR HOLE
STEP 2 OVER WRAP THE PIPE, MAKE SURE THE HOLE OR BREAK IN THE CENTER OF THE COUPLING
STEP 3 MAKE SURE THE BRIDGE PLATE GO INSIDE THE COUPING PROPERLY
STEP 4 SET THE BOLTS TO THE THREAD HOLES OF LUG BAR
STEP 5 STRENGTH THE BOLTING BY SPANNER TO THE SET TORQUE
STEP 6 DON'T ROTATE THE COUPLING AGAIN AFTER READY
DATA CHART
SIZE OD RANGE W.P. L1 L2 C1 C2 D R BOLT(M) N.M.
**Special specification available upon request Ver.2015.01
www.australianminingservices.com.au Page 36
UNIVERSAL COUPLING
MATERIALS COMPOSITION
ITEMS NAME MATERIALS OPTION STANDARD
1 GLAND DUCTILE IRON, EPOXY(FBE) EN1563-JS1040/ASTM A536-65-45-12
2 GASKET EPDM/SBR/NBR EN681-1
3 BARREL DUCTILE IRON/Carbon Steel, EPOXY EN1563-JS1040/ASTM A536-65-45-12
4 BOLTS CARBON STEEL GALV./SS DIN603
5 WASHERS CARBON STEEL GALV./SS DIN125
6 NUTS CARBON STEEL GALV./SS DIN934
7 CAPS NBR/PP
TECHNICAL DATAS
DIMENSIONS BOLTINGS WORKING PRESURE WEIGHT
INCH DN OD RANGE A(mm) B(mm) C(mm) x NUM. Bar PSI Kgs
1.5" 40 48-58 205 170 149 M12X2 10/16 260 2.9
2" 50 59-73 205 170 171 M12X2 10/16 260 3.3
2.5" 65 72-85 205 170 169 M12X4 10/16 260 4.5
3" 80 88-103 205 170 187 M12X4 10/16 260 6.2
4" 100 108-128 205 170 221 M12X4 10/16 260 6.8
5" 125 132-154 205 170 240 M12X4 10/16 260 6.6
6" 150 159-182 205 170 269 M12X4 10/16 260 8.2
8" 200 218-235 205 170 322 M12X4 10/16 260 10.4
10" 250 271-289 245 210 386 M12X6 10/16 260 12.7
12" 300 322-340 245 210 439 M12X6 10/16 260 18.4
12a 300 315-332 245 210 439 M12X6 10/16 260 18.4
14" 350 351-378 245 210 521 M16X8 10/16 260 24**
16a 400 386-414 330 310 570 M16X8 10/16 260 48.0
16" 400 417-437 280 255 570 M16X8 10/16 260 27**
18" 450 445-480 280 260 598 M16X10 10/16 260 32**
20" 500 500-535 280 260 650 M16X10 10/16 260 39**
24" 600 600-635 280 260 752 M16X10 10/16 260 48**
Remarks: Unit weight with ** marks are with carbon steel welded barrel
SUNTEX HOLD THE RIGHT TO MODIFY THE SPECS. WITHOUT PRE-ANNOUNCEMENT
Ver.2018.02
www.australianminingservices.com.au Page 37
UNIVERSAL COUPLING
MATERIALS COMPOSITION
ITEMS NAME MATERIALS OPTION STANDARD
1 BODY DUCTILE IRON, EPOXY(FBE) EN1563-JS1040/ASTM A536-65-45-12
2 BOLTINGS CARBON STEEL GALV. DIN261
3 GASKET EPDM EN681-1
4 GLAND DUCTILE IRON, EPOXY(FBE) EN1563-JS1040/ASTM A536-65-45-12
5 WASHERS CARBON STEEL GALV. DIN125
6 NUTS CARBON STEEL GALV. DIN934
7 CAPS NBR EN681-1
TECHNICAL DATAS
DIMENSIONS BOLTINGS WORKING PRESURE WEIGHT
INCH DN OD RANGE L(mm) FLANGE DRILLING x NUM. Bar PSI Kgs
1.5" 40 48-58 150 PN10/16/CLASS 125/150 M12X2 10/16 260 3.6
2" 50 59-73 150 PN10/16/CLASS 125/150 M12X2 10/16 260 4.3
2.5" 65 72-85 150 PN10/16/CLASS 125/150 M12X4 10/16 260 4.9
3" 80 88-103 150 PN10/16/CLASS 125/150 M12X4 10/16 260 6.0
4" 100 108-128 150 PN10/16/CLASS 125/150 M12X4 10/16 260 6.9
5" 125 132-154 150 PN10/16/CLASS 125/150 M12X4 10/16 260 7.6
6" 150 159-182 150 PN10/16/CLASS 125/150 M12X4 10/16 260 9.5
8" 200 218-235 150 PN10/16/CLASS 125/150 M12X4 10/16 260 10.7
10" 250 271-289 150 PN10/16/CLASS 125/150 M12X6 10/16 260 14.5
12" 300 322-340 150 PN10/16/CLASS 125/150 M12X6 10/16 260 19.1
www.australianminingservices.com.au Page 38
TECHNICAL DATA
PE Pressure Pipe Specifications According to AS/NZS 4130
SDR 41 33 26 21 17
PN for PE80* 3.2 4 - 6.3 8
PN for PE100 4.0 - 6.3 8.0 10
Min Mean Ave Min Mean Ave Min Mean Ave Min Mean Ave Min Mean Ave
OD/DN
Wall ID Mass Wall ID Mass Wall ID Mass Wall ID Mass Wall ID Mass
16 1.6 12.7 0.075 1.6 12.7 0.075 1.6 12.7 0.075 1.6 12.7 0.075 1.6 12.7 0.075
20 1.6 16.7 0.10 1.6 16.7 0.10 1.6 16.7 0.10 1.6 16.7 0.10 1.6 16.7 0.10
25 1.6 21.7 0.12 1.6 21.7 0.12 1.6 21.7 0.12 1.6 21.7 0.12 1.6 21.1 0.12
32 1.6 28.7 0.16 1.6 28.7 0.16 1.6 28.7 0.16 1.6 28.7 0.16 1.9 28.1 0.18
40 1.6 36.7 0.20 1.6 36.7 0.20 1.6 36.7 0.20 1.9 36.1 0.23 2.4 35.0 0.29
50 1.6 46.7 0.25 1.6 46.7 0.25 2.0 45.9 0.31 2.4 45.0 0.37 3.0 43.8 0.45
63 1.6 59.7 0.32 2.0 59.0 0.38 2.4 58.0 0.47 3.0 56.8 0.57 3.8 55.1 0.71
75 1.9 71.2 0.45 2.3 70.3 0.54 2.9 69.1 0.67 3.6 67.6 0.81 4.5 65.7 1.00
90 2.2 85.5 0.63 2.8 84.3 0.78 3.5 82.8 0.97 4.3 81.1 1.17 5.4 78.8 1.44
110 2.7 104.6 0.92 3.4 103.1 1.15 4.3 101.2 1.46 5.3 99.1 1.75 6.6 96.4 2.14
125 3.1 118.9 1.20 3.9 117.2 1.49 4.8 115.3 1.84 6.0 112.8 2.24 7.4 109.8 2.74
140 3.5 133.1 1.58 4.3 131.4 1.85 5.4 129.1 2.33 6.7 126.4 2.81 8.3 123.0 3.44
160 4.0 152.2 1.97 4.9 150.1 2.44 6.2 147.5 3.05 7.7 144.4 3.68 9.5 140.6 4.48
180 4.4 171.4 2.45 5.6 169.0 3.06 6.9 166.2 3.80 8.6 162.6 4.63 10.7 158.2 5.70
200 4.9 190.4 3.01 6.2 187.7 3.77 7.7 184.5 4.71 9.6 180.5 5.73 11.9 175.7 7.00
225 5.5 214.2 3.81 6.9 211.1 4.79 8.6 207.7 5.92 10.8 203.1 7.24 13.4 197.6 8.88
250 6.2 237.8 4.78 7.7 234.6 5.90 9.6 230.7 7.33 11.9 225.9 8.87 14.8 219.8 10.88
280 6.9 266.6 5.92 8.6 262.8 7.41 10.7 258.6 9.15 13.4 252.9 11.19 16.6 246.2 13.67
315 7.7 300.0 7.44 9.7 295.7 9.34 12.1 290.7 11.66 15.0 284.7 14.07 18.7 276.9 17.31
355 8.7 338.1 9.46 10.9 333.3 11.85 13.6 327.8 14.73 16.9 320.9 17.86 21.1 312.0 22.03
400 9.8 380.9 12.00 12.3 375.5 15.02 15.3 369.3 18.68 19.1 361.3 22.77 23.7 351.7 27.84
450 11.0 428.6 15.13 13.8 422.4 19.04 17.2 415.5 23.61 21.5 406.5 28.80 26.7 395.6 35.27
500 12.3 476.0 18.83 15.3 469.3 23.52 19.1 461.7 29.13 23.9 451.7 35.53 29.6 439.7 43.45
560 13.7 533.4 23.45 17.2 525.7 29.49 21.4 517.2 36.51 26.7 506.1 44.47 33.2 492.4 54.60
630 15.4 600.1 29.67 19.3 591.5 37.26 24.1 581.8 46.27 30.0 569.5 56.17 37.2 554.1 68.99
710 17.4 676.3 37.65 21.8 666.6 47.30 27.2 655.6 58.81 33.9 641.6 71.52 42.1 624.3 87.74
800 19.6 761.9 47.87 24.5 751.0 60.09 30.6 738.8 74.48 38.1 723.0 90.65 47.4 703.2 111.57
Note: 1) All dimensions are in millimetres, and mass in kg/m. 2) Nominal Diameter (DN) equals outside diameter.
* PE80 Superceded by PE100.
190 Advanced Piping Systems _ PE Industrial Product Catalogue
TECHNICAL DATA
PE Pressure Pipe Specifications According to AS/NZS 4130
SDR 13.6 11 9 7.4
PN for PE80* 10.0 12.5 16 20
PN for PE100 12.5 16.0 20 25
Min Mean Ave Min Mean Ave Min Mean Ave Min Mean Ave
OD/DN
Wall ID Mass Wall ID Mass Wall ID Mass Wall ID Mass
16 1.6 12.7 0.075 1.6 12.7 0.075 1.8 12.3 0.082 2.2 11.7 0.09
20 1.6 16.7 0.10 1.9 16.1 0.11 2.3 15.2 0.13 2.7 14.6 0.14
25 1.9 21.1 0.14 2.3 20.2 0.17 2.8 19.2 0.20 3.4 18.2 0.23
32 2.4 27.0 0.23 2.9 26.0 0.27 3.6 24.5 0.32 4.3 23.4 0.37
40 3.0 33.8 0.35 3.7 32.3 0.42 4.5 30.6 0.50 5.4 29.2 0.57
50 3.7 42.3 0.54 4.6 40.4 0.66 5.6 38.3 0.78 6.8 36.5 0.90
63 4.7 53.2 0.86 5.8 50.9 1.04 7.1 48.1 1.25 8.5 46.2 1.41
75 5.5 63.6 1.20 6.8 60.9 1.45 8.4 57.5 1.75 10.1 55.0 1.99
90 6.6 76.3 1.73 8.2 72.9 2.10 10.1 68.6 2.55 12.2 66.0 2.87
110 8.1 93.2 2.59 10.0 89.3 3.12 12.3 84.4 3.75 14.9 80.3 4.34
125 9.2 106.0 3.34 11.4 101.4 4.05 14.0 96.0 4.84 16.9 91.2 5.61
140 10.3 118.8 4.19 12.7 113.8 5.05 15.7 107.5 6.08 18.9 102.0 7.06
160 11.8 135.8 5.47 14.6 129.9 6.63 17.9 123.0 7.92 21.6 117.0 9.14
180 13.3 152.7 6.94 16.4 146.2 8.38 20.1 138.4 10.02 24.3 132.0 11.50
200 14.7 169.8 8.51 18.2 162.4 10.33 22.4 153.6 12.39 27.0 146.0 14.34
225 16.6 190.9 10.80 20.5 182.7 13.07 25.1 173.0 15.63 30.4 165.0 17.97
250 18.4 212.2 13.31 22.7 203.2 16.08 27.9 192.3 19.27 33.8 183.0 22.27
280 20.6 237.8 16.68 25.4 227.7 20.16 31.3 215.3 24.23 37.8 205.0 27.93
315 23.2 267.4 21.14 28.6 256.1 25.52 35.2 242.2 30.65 42.6 230.0 35.56
355 26.1 301.5 26.80 32.2 288.7 32.39 39.6 273.2 38.84 48.0 260.0 44.85
400 29.4 339.7 33.98 36.3 325.2 41.12 44.7 307.6 49.37 54.1 293.0 56.92
450 33.1 382.1 43.05 40.9 365.8 52.08 50.3 346.0 62.51 60.8 328.0 72.87
500 36.8 424.6 53.12 45.4 406.5 64.26 55.8 384.7 77.03
560 41.2 475.6 66.64 50.8 455.5 80.50
630 46.3 535.2 84.23 57.2 512.3 102.00
710 52.2 603.1 107.01
800
Note: 1) All dimensions are in millimetres, and mass in kg/m. 2) Nominal Diameter (DN) equals outside diameter.
* PE80 Superceded by PE100.
Phone 1300 362 229 Fax 08 8206 7001 Email [email protected] 191
CARBON STEEL PIPE • Dimensions
Welded & Seamless Carbon Steel Pipe to ASME B36.10M Structural Steel Hollow Sections to AS1163
Nominal size OD
All dimensions are in mm
Chart of Commom Stainless Steel Pipe Grades Grade C350
Chemical Analysis (%) Specified Wall Thickness in mm
Schedule
DN NPS mm
Printed October 2002
10 20 30 40 Std 60 80 XS 100 120 140 160 XXS 4.8 5.5 6.0 6.4 7.1 8.2 9.3 9.5 12.7
6 1 /8 10.3 1.24 1.45 1.73 1.73 2.41 2.41
8 1 /4 13.7 1.65 1.85 2.24 2.24 3.02 3.02
10 3 /8 17.1 1.65 1.85 2.31 2.31 3.20 3.20
15 1 /2 21.3 2.11 2.41 2.77 2.77 3.73 3.73 4.78 7.47
20 3 /4 26.7 2.11 2.41 2.87 2.87 3.91 5.56 7.82
25 1 33.4 2.77 2.90 3.38 3.38 4.55 4.55 6.35 9.09
1
32 1 /4 42.2 2.77 2.97 3.56 3.56 4.85 4.85 6.35 9.70
1
40 1 /2 48.3 2.77 3.18 3.68 3.68 5.08 5.08 7.14 10.15
50 2 60.3 2.77 3.18 3.91 3.91 5.54 5.54 8.74 11.07
1
65 2 /2 73.0 3.05 4.78 5.16 5.16 7.01 7.01 9.53 14.02
80 3 88.9 3.05 4.78 5.49 5.49 7.62 7.62 11.13 15.24 ✓ ✓
1
90 3 /2 101.6 3.05 4.78 5.74 5.74 8.08 8.08
100 4 114.3 3.05 4.78 6.02 6.02 8.56 8.56 11.13 13.49 17.12 ✓ ✓
125 5 141.3 3.40 6.55 6.55 9.53 9.53 12.70 15.88 19.05
150 6 168.3 3.40 7.11 7.11 10.97 10.97 14.27 18.26 21.95 ✓ ✓ ✓
200 8 219.1 3.76 6.35 7.04 8.18 8.18 10.31 12.70 12.70 15.09 18.26 20.62 23.01 22.23 ✓ ✓ ✓ ✓
250 10 273.0 4.19 6.35 7.80 9.27 9.27 12.70 15.09 12.70 18.26 21.44 25.40 28.58 25.40 ✓ ✓ ✓ ✓
300 12 323.8 4.57 6.35 8.38 10.31 9.53 14.27 17.48 12.70 21.44 25.40 28.58 33.32 25.40 ✓ ✓ ✓
350 14 355.6 6.35 7.92 9.53 11.13 9.53 15.09 19.05 12.70 23.83 27.79 31.75 35.71 ✓ ✓ ✓
400 16 406.4 6.35 7.92 9.53 12.70 9.53 16.66 21.44 12.70 26.19 30.96 36.53 40.49 ✓ ✓ ✓
450 18 457 6.35 7.92 11.13 14.27 9.53 19.05 23.83 12.70 29.36 34.93 39.67 45.24 ✓ ✓ ✓
500 20 508 6.35 9.53 12.70 15.09 9.53 20.62 26.19 12.70 32.54 38.10 44.45 50.01
550 22 559 6.35 9.53 12.70 9.53 22.23 28.58 12.70 34.93 41.28 47.63 53.98
600 24 610 6.35 9.53 14.27 17.48 9.53 24.61 30.96 12.70 38.89 46.02 52.37 59.54
650 26 660 7.92 12.70 9.53 12.70
700 28 711 7.92 12.70 15.88 9.53 12.70
750 30 762 7.92 12.70 15.88 9.53 12.70
800 32 813 7.92 12.70 15.88 17.48 9.53 12.70
850 34 864 7.92 12.70 15.88 17.48 9.53 12.70
900 36 914 7.92 12.70 15.88 19.05 9.53 12.70
950 38 965 9.53 12.70
1000 40 1016 9.53 12.70
1050 42 1067 9.53 12.70
1100 44 1118 9.53 12.70
1150 46 1168 9.53 12.70
1200 48 1219 9.53 12.70
Note 1: For dimensional tolerances refer to ASME B36.10M
Equivalent sizes shown in API Specification 5L
www.atlas-steels.com.au
ATLAS STEELS
5
METALS
S10
DISTRIBUTION
CARBON STEEL PIPE • Dimensions
Welded & Seamless Carbon Steel Pipe to ASME B36.10M Structural Steel Hollow Sections to AS1163
Nominal size OD
All dimensions are in mm
Chart of Commom Stainless Steel Pipe Grades Grade C350
Chemical Analysis (%) Specified Wall Thickness in mm
Schedule
DN NPS mm
Printed October 2002
10 20 30 40 Std 60 80 XS 100 120 140 160 XXS 4.8 5.5 6.0 6.4 7.1 8.2 9.3 9.5 12.7
6 1 /8 10.3 1.24 1.45 1.73 1.73 2.41 2.41
8 1 /4 13.7 1.65 1.85 2.24 2.24 3.02 3.02
10 3 /8 17.1 1.65 1.85 2.31 2.31 3.20 3.20
15 1 /2 21.3 2.11 2.41 2.77 2.77 3.73 3.73 4.78 7.47
20 3 /4 26.7 2.11 2.41 2.87 2.87 3.91 5.56 7.82
25 1 33.4 2.77 2.90 3.38 3.38 4.55 4.55 6.35 9.09
1
32 1 /4 42.2 2.77 2.97 3.56 3.56 4.85 4.85 6.35 9.70
1
40 1 /2 48.3 2.77 3.18 3.68 3.68 5.08 5.08 7.14 10.15
50 2 60.3 2.77 3.18 3.91 3.91 5.54 5.54 8.74 11.07
1
65 2 /2 73.0 3.05 4.78 5.16 5.16 7.01 7.01 9.53 14.02
80 3 88.9 3.05 4.78 5.49 5.49 7.62 7.62 11.13 15.24 ✓ ✓
1
90 3 /2 101.6 3.05 4.78 5.74 5.74 8.08 8.08
100 4 114.3 3.05 4.78 6.02 6.02 8.56 8.56 11.13 13.49 17.12 ✓ ✓
125 5 141.3 3.40 6.55 6.55 9.53 9.53 12.70 15.88 19.05
150 6 168.3 3.40 7.11 7.11 10.97 10.97 14.27 18.26 21.95 ✓ ✓ ✓
200 8 219.1 3.76 6.35 7.04 8.18 8.18 10.31 12.70 12.70 15.09 18.26 20.62 23.01 22.23 ✓ ✓ ✓ ✓
250 10 273.0 4.19 6.35 7.80 9.27 9.27 12.70 15.09 12.70 18.26 21.44 25.40 28.58 25.40 ✓ ✓ ✓ ✓
300 12 323.8 4.57 6.35 8.38 10.31 9.53 14.27 17.48 12.70 21.44 25.40 28.58 33.32 25.40 ✓ ✓ ✓
350 14 355.6 6.35 7.92 9.53 11.13 9.53 15.09 19.05 12.70 23.83 27.79 31.75 35.71 ✓ ✓ ✓
400 16 406.4 6.35 7.92 9.53 12.70 9.53 16.66 21.44 12.70 26.19 30.96 36.53 40.49 ✓ ✓ ✓
450 18 457 6.35 7.92 11.13 14.27 9.53 19.05 23.83 12.70 29.36 34.93 39.67 45.24 ✓ ✓ ✓
500 20 508 6.35 9.53 12.70 15.09 9.53 20.62 26.19 12.70 32.54 38.10 44.45 50.01
550 22 559 6.35 9.53 12.70 9.53 22.23 28.58 12.70 34.93 41.28 47.63 53.98
600 24 610 6.35 9.53 14.27 17.48 9.53 24.61 30.96 12.70 38.89 46.02 52.37 59.54
650 26 660 7.92 12.70 9.53 12.70
700 28 711 7.92 12.70 15.88 9.53 12.70
750 30 762 7.92 12.70 15.88 9.53 12.70
800 32 813 7.92 12.70 15.88 17.48 9.53 12.70
850 34 864 7.92 12.70 15.88 17.48 9.53 12.70
900 36 914 7.92 12.70 15.88 19.05 9.53 12.70
950 38 965 9.53 12.70
1000 40 1016 9.53 12.70
1050 42 1067 9.53 12.70
1100 44 1118 9.53 12.70
1150 46 1168 9.53 12.70
1200 48 1219 9.53 12.70
Note 1: For dimensional tolerances refer to ASME B36.10M
Equivalent sizes shown in API Specification 5L
www.atlas-steels.com.au
ATLAS STEELS
5
METALS
S10
DISTRIBUTION
6
S10
CARBON STEEL PIPE • Weights
Welded & Seamless Carbon Steel Pipe to ASME B36.10M Structural Steel Hollow Sections to AS1163
Nominal size OD
All weights are in kg/m
Chart of Commom Stainless Steel Pipe Grades All weights are in kg/m
Chemical Analysis (%) Specified Wall Thickness in mm
Schedule
DN NPS mm
10 20 30 40 Std 60 80 XS 100 120 140 160 XXS 4.8 5.5 6.0 6.4 7.1 8.2 9.3 9.5 12.7
Printed October 2002
6 1 /8 10.3 0.28 0.32 0.37 0.37 0.47 0.47
8 1 /4 13.7 0.49 0.54 0.63 0.63 0.80 0.80
10 3 /8 17.1 0.63 0.70 0.84 0.84 1.10 1.10
15 1 /2 21.3 1.00 1.12 1.27 1.27 1.62 1.62 1.95 2.55
20 3 /4 26.7 1.28 1.44 1.69 1.69 2.20 2.20 2.90 3.64
25 1 33.4 2.09 2.18 2.50 2.50 3.24 3.24 4.24 5.45
1
32 1 /4 42.2 2.70 2.87 3.39 3.39 4.47 4.47 5.61 7.77
1
40 1 /2 48.3 3.11 3.53 4.05 4.05 5.41 5.41 7.25 9.56
50 2 60.3 3.93 4.48 5.44 5.44 7.48 7.48 11.11 13.44
1
65 2 /2 73.0 5.26 8.04 8.63 8.63 11.41 11.41 14.92 20.39
80 3 88.9 6.45 9.92 11.29 11.29 15.27 15.27 21.35 27.67 10.0 11.3
1
90 3 /2 101.6 7.40 11.41 13.57 13.57 18.63 18.63
100 4 114.3 8.36 12.91 16.07 16.07 22.32 22.32 28.32 33.54 41.03 13.0 16.0
125 5 141.3 11.57 21.77 21.77 30.97 30.97 40.28 49.11 57.43
150 6 168.3 13.84 28.26 28.26 42.56 42.56 54.20 67.56 79.22 19.4 25.6 28.2
200 8 219.1 19.96 33.31 36.81 42.55 42.55 53.08 64.64 64.64 75.92 90.44 100.92 111.27 107.92 25.4 33.6 42.6 64.6
250 10 273.0 27.78 41.77 51.03 60.31 60.31 81.55 96.01 81.55 114.75 133.06 155.15 172.33 155.15 31.8 42.1 60.5 81.5
300 12 323.8 36.00 49.73 65.20 79.73 73.88 108.96 132.08 186.97 159.91 186.97 208.14 238.76 186.97 50.1 73.7 97.5
350 14 355.6 54.69 67.90 81.33 94.55 81.33 126.71 158.10 107.39 194.96 224.65 253.56 281.70 55.1 81.1 107.0
400 16 406.4 62.64 77.83 93.27 123.30 93.27 160.12 203.53 123.30 245.56 286.64 333.19 365.35 63.1 93.0 123.0
450 18 457 70.57 87.71 122.38 155.80 105.16 205.74 254.55 139.15 309.62 363.56 408.26 459.37 71.1 105.0 139.0
500 20 508 78.55 117.15 155.12 183.42 117.15 247.83 311.17 155.12 381.53 441.49 508.11 564.81
550 22 559 86.54 129.13 171.09 129.13 294.25 373.83 171.09 451.42 527.02 600.63 672.26
600 24 610 94.53 141.12 209.64 255.41 141.12 355.26 442.08 187.06 547.71 640.03 720.15 808.22
650 26 660 127.36 202.72 152.87 202.72
700 28 711 137.32 218.69 271.21 164.85 218.69
750 30 762 147.28 234.67 292.18 176.84 234.67
800 32 813 157.24 250.64 312.15 342.91 188.82 250.64
850 34 864 167.20 266.61 332.12 364.90 200.31 266.61
Note 1: All weights are theoretical and approximate
900 36 914 176.96 282.27 351.70 420.42 212.56 282.27
Note 2: Formula for circular steel pipe kilograms/metre M = (D-t) t x 0.02466
950 38 965 224.54 298.24
Equivalent sizes shown in API Specification 5L
1000 40 1016 236.53 314.22
1050 42 1067 248.52 330.19
1100 44 1118 260.50 346.16 www.atlas-steels.com.au
ATLAS STEELS
METALS
1150 46 1168 272.25 351.82 DISTRIBUTION
1200 48 1219 284.24 377.79
6
S10
CARBON STEEL PIPE • Weights
Welded & Seamless Carbon Steel Pipe to ASME B36.10M Structural Steel Hollow Sections to AS1163
Nominal size OD
All weights are in kg/m
Chart of Commom Stainless Steel Pipe Grades All weights are in kg/m
Chemical Analysis (%) Specified Wall Thickness in mm
Schedule
DN NPS mm
10 20 30 40 Std 60 80 XS 100 120 140 160 XXS 4.8 5.5 6.0 6.4 7.1 8.2 9.3 9.5 12.7
Printed October 2002
6 1 /8 10.3 0.28 0.32 0.37 0.37 0.47 0.47
8 1 /4 13.7 0.49 0.54 0.63 0.63 0.80 0.80
10 3 /8 17.1 0.63 0.70 0.84 0.84 1.10 1.10
15 1 /2 21.3 1.00 1.12 1.27 1.27 1.62 1.62 1.95 2.55
20 3 /4 26.7 1.28 1.44 1.69 1.69 2.20 2.20 2.90 3.64
25 1 33.4 2.09 2.18 2.50 2.50 3.24 3.24 4.24 5.45
1
32 1 /4 42.2 2.70 2.87 3.39 3.39 4.47 4.47 5.61 7.77
1
40 1 /2 48.3 3.11 3.53 4.05 4.05 5.41 5.41 7.25 9.56
50 2 60.3 3.93 4.48 5.44 5.44 7.48 7.48 11.11 13.44
1
65 2 /2 73.0 5.26 8.04 8.63 8.63 11.41 11.41 14.92 20.39
80 3 88.9 6.45 9.92 11.29 11.29 15.27 15.27 21.35 27.67 10.0 11.3
1
90 3 /2 101.6 7.40 11.41 13.57 13.57 18.63 18.63
100 4 114.3 8.36 12.91 16.07 16.07 22.32 22.32 28.32 33.54 41.03 13.0 16.0
125 5 141.3 11.57 21.77 21.77 30.97 30.97 40.28 49.11 57.43
150 6 168.3 13.84 28.26 28.26 42.56 42.56 54.20 67.56 79.22 19.4 25.6 28.2
200 8 219.1 19.96 33.31 36.81 42.55 42.55 53.08 64.64 64.64 75.92 90.44 100.92 111.27 107.92 25.4 33.6 42.6 64.6
250 10 273.0 27.78 41.77 51.03 60.31 60.31 81.55 96.01 81.55 114.75 133.06 155.15 172.33 155.15 31.8 42.1 60.5 81.5
300 12 323.8 36.00 49.73 65.20 79.73 73.88 108.96 132.08 186.97 159.91 186.97 208.14 238.76 186.97 50.1 73.7 97.5
350 14 355.6 54.69 67.90 81.33 94.55 81.33 126.71 158.10 107.39 194.96 224.65 253.56 281.70 55.1 81.1 107.0
400 16 406.4 62.64 77.83 93.27 123.30 93.27 160.12 203.53 123.30 245.56 286.64 333.19 365.35 63.1 93.0 123.0
450 18 457 70.57 87.71 122.38 155.80 105.16 205.74 254.55 139.15 309.62 363.56 408.26 459.37 71.1 105.0 139.0
500 20 508 78.55 117.15 155.12 183.42 117.15 247.83 311.17 155.12 381.53 441.49 508.11 564.81
550 22 559 86.54 129.13 171.09 129.13 294.25 373.83 171.09 451.42 527.02 600.63 672.26
600 24 610 94.53 141.12 209.64 255.41 141.12 355.26 442.08 187.06 547.71 640.03 720.15 808.22
650 26 660 127.36 202.72 152.87 202.72
700 28 711 137.32 218.69 271.21 164.85 218.69
750 30 762 147.28 234.67 292.18 176.84 234.67
800 32 813 157.24 250.64 312.15 342.91 188.82 250.64
850 34 864 167.20 266.61 332.12 364.90 200.31 266.61
Note 1: All weights are theoretical and approximate
900 36 914 176.96 282.27 351.70 420.42 212.56 282.27
Note 2: Formula for circular steel pipe kilograms/metre M = (D-t) t x 0.02466
950 38 965 224.54 298.24
Equivalent sizes shown in API Specification 5L
1000 40 1016 236.53 314.22
1050 42 1067 248.52 330.19
1100 44 1118 260.50 346.16 www.atlas-steels.com.au
ATLAS STEELS
METALS
1150 46 1168 272.25 351.82 DISTRIBUTION
1200 48 1219 284.24 377.79
Coupling Product Photo Desctiption Size
Flexible Material: Ductile Iron ASTM A-536 grade 65-
45-12
Coupling
Surface: Epoxy Red/ Orange / Hot Galvanized
Approvals: UL/ FM/ CE/ ISO9001/LR
Reducing Material: Ductile Iron ASTM A-536 grade 65-
45-12
Coupling
Surface: Epoxy Red/ Orange / Hot Galvanized
Approvals: UL/ FM/ CE/ ISO9001/LR
Rigid Material: Ductile Iron ASTM A-536 grade 65-
45-12
Coupling
Surface: Epoxy Red/ Orange / Hot Galvanized
Approvals: UL/ FM/ CE/ ISO9001/LR
Angle Material: Ductile Iron ASTM A536 Working
Pad Pressure: 300Psi/2.07Mpa Surface
Rigid
Treatment: Epoxy Powder, Galvanized
Coupling
500 Material: Ductile Iron ASTM A-536 grade 65-
45-12
Psi
Coupling Surface: Epoxy Red/ Orange / Hot Galvanized
Approvals: UL/ FM/ CE/ ISO9001/LR
Shouldered Material: Ductile Iron ASTM A-536 grade 65-
45-12
Flexible
Coupling Surface: Epoxy Red/ Orange / Hot Galvanized
Approvals: UL/ FM/ CE/ ISO9001
www.australianminingservices.com.au Page 1
Coupling Product Photo Desctiption Size
90°Elbow Material: Ductile Iron ASTM A-536 grade 65-
45-12
Surface: Epoxy Red/ Orange / Hot Galvanized
Approvals: UL/ FM/ CE/ ISO9001/LR
45° Elbow Material: Ductile Iron ASTM A-536 grade 65-
45-12
Surface: Epoxy Red/ Orange / Hot Galvanized
Approvals: UL/ FM/ CE/ ISO9001
22.5° Material: Ductile Iron ASTM A-536 grade 65-
45-12
Elbow
Surface: Epoxy Red/ Orange / Hot Galvanized
Approvals: UL/ FM/ CE/ ISO9001
11.25° Material: Ductile Iron ASTM A-536 grade 65-
45-12
Elbow
Surface: Epoxy Red/ Orange / Hot Galvanized
Approvals: UL/ FM/ CE/ ISO9001
Grooved Material: Ductile Iron ASTM A-536 grade 65-
45-12
Equal
Tee Surface: Epoxy Red/ Orange / Hot Galvanized
Approvals: UL/ FM/ CE/ ISO9001/LR
www.australianminingservices.com.au Page 2
Coupling Product Photo Desctiption Size
Grooved Material: Ductile Iron ASTM A-536 grade 65-
45-12
Mechanical
Tee Surface: Epoxy Red/ Orange / Hot Galvanized
Approvals: UL/ FM/ CE/ ISO9001/LR
Threaded Material: Ductile Iron ASTM A-536 grade 65-
45-12
Mechanical
Tee Surface: Epoxy Red/ Orange / Hot Galvanized
Approvals: UL/ FM/ CE/ ISO9001/LR
www.australianminingservices.com.au Page 3
Coupling Product Photo Desctiption Size
U-Bolt Material: Ductile Iron ASTM A-536 grade 65-
45-12
Mechanical
Tee Surface: Epoxy Red/ Orange / Hot Galvanized
Approvals: UL/ FM/ CE/ ISO9001/LR
Grooved Material: Ductile Iron ASTM A-536 grade 65-
45-12
Cross
Surface: Epoxy Red/ Orange / Hot Galvanized
Approvals: UL/ FM/ CE/ ISO9001/LR
www.australianminingservices.com.au Page 4
Coupling Product Photo Desctiption Size
Grooved Grooved Cross Material: Ductile Iron ASTM
A-536 grade 65-45-12
Reducing
Cross Surface: Epoxy Red/ Orange / Hot Galvanized
Approvals: UL/ FM/ CE/ ISO9001/LR
www.australianminingservices.com.au Page 5
Coupling Product Photo Desctiption Size
Threaded Material: Ductile Iron ASTM A-536 grade 65-
45-12
Mechanical
Cross Surface: Epoxy Red/ Orange / Hot Galvanized
Approvals: UL/ FM/ CE/ ISO9001/LR
www.australianminingservices.com.au Page 6
Coupling Product Photo Desctiption Size
Grooved Material: Ductile Iron ASTM A-536 grade 65-
45-12
Reducer
Surface: Epoxy Red/ Orange / Hot Galvanized
Approvals: UL/ FM/ CE/ ISO9001/LR
Thread Material: Ductile Iron ASTM A-536 grade 65-
45-12
Reducer
Surface: Epoxy Red/ Orange / Hot Galvanized
Approvals: UL/ FM/ CE/ ISO9001/LR
Grooved Material: Ductile Iron ASTM A-536 grade 65-
45-12
Flange
Coupling Surface: Epoxy Red/ Orange / Hot Galvanized
PN16 Approvals: UL/ FM/ CE/ ISO9001/LR
Grooved Material: Ductile Iron ASTM A-536 grade 65-
45-12
Flange
Coupling Surface: Epoxy Red/ Orange / Hot Galvanized
Class150 Approvals: UL/ FM/ CE/ ISO9001/LR
www.australianminingservices.com.au Page 7
Coupling Product Photo Desctiption Size
GROOVED Material: Ductile Iron ASTM A-536 grade 65-
45-12
CAP
Surface: Epoxy Red/ Orange / Hot Galvanized
Approvals: UL/ FM/ CE/ ISO9001/LR
FLANGE Material: Ductile Iron ASTM A-536 grade 65-
45-12 Surface: Epoxy Red/ Orange / Hot
ADAPTOR Galvanized Approvals: UL/ FM/ CE/
PN16 ISO9001/LR
www.australianminingservices.com.au Page 8
Coupling Product Photo Desctiption Size
FLANGE Material: Ductile Iron ASTM A-536 grade 65-
45-12
ADAPTOR
CLASS150 Surface: Epoxy Red/ Orange / Hot Galvanized
Approvals: UL/ FM/ CE/ ISO9001/LR
Universal Material: Ductile Iron ASTM A-536 grade 65-
45-12
Flange
Adapter Surface: Epoxy Red/ Orange / Hot Galvanized
Grooved Material: Ductile Iron ASTM A-536 grade 65-
45-12
Reducing
Tee Surface: Epoxy Red/ Orange / Hot Galvanized
Approvals: UL/ FM/ CE/ ISO9001/LR
www.australianminingservices.com.au Page 9
Coupling Product Photo Desctiption Size
THREADED Material: Ductile Iron ASTM A-536 grade 65-
45-12
REDUCING
TEE Surface: Epoxy Red/ Orange / Hot Galvanized
Approvals: UL/ FM/ CE/ ISO9001/LR
www.australianminingservices.com.au Page 10
Australian Mining Product and Services Pty Limited
Axially Restrained Model: GRIP-G The GRIP-G
with Double coupling is
Anchor Rings Size: O.D φ26.9- designed to
Coupling φ273mm replace the need
for flanging,
Sealing: EPDM,
NBR, VITON, welding, pipe
SILICONE grooving and
pipe threading by
SS quality: providing a quick
AISI304, and easy solution
AISI316L, to joining plain-
AISI316TI end pipe. The
GRIP-G has two
anchor rings
which are placed
adjacent to, but
separate from,
the sealing
mechanism.
Suitable for
pipes sizes
from O.D
φ26.9 to-
φ273mm.
Suitable for pipes
material: Carbon
steel, stainless
steel, copper,
conifer, cast and
ductile iron, GRP,
most plastic and
other material.
GRIP-G Axially
restrained with
double anchor
rings coupling is
the most popular
type in GRIP
Coupling series.
Two anchor rings
have progressive
anchoring effect,
it is easy on
pipes, as
pressure
increased, so
1 www.australianminingservices.com.au
Australian Mining Product and Services Pty Limited
does the gripping
effect. GRIP-G
offers high levels
of security by
locking pipes
together under
pressure. GRIP-
G working
pressure up to 46
bar. Temperature
range: -30℃ up to
180℃, material in
SS304, SS316
and SS316TI. It
suitable for most
applications in
shipbuilding,
offshore
industries, water
and waste
treatment,
industrial process
pipe work and
others.
Fireproof Model: GRIP-GF The Grip-GF
Coupling combines with
Size: O.D φ26.9-
φ273mm functional design
with the latest
Sealing: technologies.
EPDM, The GRIP-GF is
NBR, based on the
VITON, and proven coupling
SILICONE. technology,
SS quality: which has been
AISI304; developed for the
AISI316L; shipbuilding
AISI316TI. industry, also is
successfully
used for
tunnelling, fire
hose applications
etc. In the event
of a fire, GRIP-
GF coupling
protectively
encloses the
coupling. During
this process, the
2 www.australianminingservices.com.au
Australian Mining Product and Services Pty Limited
coupling retains
its full
operational
capability without
any damage.
Suitable for pipes
O.D φ26.9-
φ273mm
Suitable for pipes
material: Carbon
steel, stainless
steel, copper,
conifer, GRE,
and other
material
The Model: GRIP-M The Grip-M is flex
multifunctional coupling, has two
coupling— Size: O.D φ26.9- thick sealing lips
φ2032mm
connection and which allow for
compensator in Sealing: EPDM, pipe expansion
one NBR, VITON, and contraction.
SILICONE This type of
coupling not only
SS quality:
AISI304, connects pipes, it
AISI316L, simultaneously
AISI316TI compensates the
axial movement,
giving a
significant added
value to the
coupling.
Multi-function
Pipe Coupling is
suitable for the
pipes with
outside diameter
range of 26.9～
2032mm.
Suitable for pipes
material: Carbon
steel, stainless
steel, copper,
conifer, cast and
3 www.australianminingservices.com.au
Australian Mining Product and Services Pty Limited
ductile iron, GRP,
asbestos cement,
HDPE, MDPE,,
PVC, uPVC, ABS
and other
material.
Repair Coupling Model: GRIP-R The Grip-R is
hinged type
Size: O.D φ26.9-
φ168.3mm repair clamp, it is
ideal for all
Sealing: EPDM, situations where
NBR, you need to
VITON, make a
SILICONE. permanent repair
SS quality: under pressure.
AISI304, Simply open up
AISI316L, the coupling,
AISI316TI wrap it around
the pipe and
fasten- you have
repaired the
pipeline such as
pipe joints,
cracks etc. in
minutes and
avoided the need
for costly
downtime.
Suitable for pipes
O.D φ26.9-
φ168.3mm
Suitable for pipes
material: Carbon
steel, stainless
steel, copper,
conifer, cast and
ductile iron,
GRP, asbestos
cement, HDPE,
MDPE,, PVC,
uPVC, ABS and
other material.
Working
pressure up to
40bar.
4 www.australianminingservices.com.au
Australian Mining Product and Services Pty Limited
The advantage
of GRIP-R repair
clamps is that is
can be fitted to
existing pipes in
situation, without
any need to
remove and
replacing pipes,
GRIP-R pipe
repair clamp can
repair the pipes
that are ageing
and corrosive
and pipe wall has
holes or cracks.
When installing
it, it only needs
pipe clamp to
wrap the leakage
part and tighten
the bolt. Then
the installation is
finished ideally
and reliably.
Outside diameter
of GRIP-R
Folding Pipe
repair clamp is
from 38 to
168.3mm.
Double Lock Pipe Model: GRIP-D Double Lock Pipe
Clamp (Pipe Size: O.D φ180- Clamp (Pipe
repair with a 2 φ2032mm repair with a 2
lock active lock active
sealing system Sealing: EPDM, sealing system
coupling) NBR, VITON, coupling)
SILICONE
SS quality: The Grip-D is
AISI304, two-piece type
AISI316L, repair clamp, can
AISI316TI be fitted to exiting
pipes in situ,
without any need
to remove and
relay the pipes.
5 www.australianminingservices.com.au
Australian Mining Product and Services Pty Limited
This makes it the
ideal solution for
permanent
repairs of pipe
joints, cracks etc.
It suit for large
pipes, two-piece
type repair clamp
can repair pipe
without large
installation
space.
Suitable for pipes
O.D φ180-
φ2032m
Suitable for pipes
material: Carbon
steel, stainless
steel, copper,
conifer, cast and
ductile iron, GRP,
asbestos cement,
HDPE, MDPE,,
PVC, uPVC, ABS
and other
material.
Working pressure
up to 30bar.
The advantage of
GRIP-D repair
clamps is that is
can be fitted to
existing pipes in
situation, without
any need to
remove and
replacing pipes,
GRIP-R pipe
repair clamp can
repair the pipes
that are ageing
and corrosive
and pipe wall has
holes or cracks.
6 www.australianminingservices.com.au
Australian Mining Product and Services Pty Limited
When installing it,
it only needs pipe
clamp to wrap the
leakage part and
tighten the bolt.
Then the
installation is
finished ideally
and reliably.
Outside diameter
of GRIP-D double
lock Pipe repair
clamp is from
180 to 2032mm
Reinforced Model: GRIP-Z The GRIP-Z is a
Axially standard axial
Restrained Size: O.D φ30- restrain coupling
Coupling φ168.3mm with reinforced
Sealing: internal structure
EPDM, so that can bear
NBR, higher pressure.
VITON, The double
SILICONE.
anchoring rings
SS quality: can bite into the
AISI304, two pipes and
AISI316L, prevent them
AISI316TI. from pulling
apart.
Suitable for pipes
O.D φ30-
φ168.3mm
Suitable for pipes
material: Carbon
steel, stainless
steel, copper,
conifer, cast and
ductile iron,
GRP, most
plastic and other
material.
Pressure up to
64bar
GRIP-Z is
Reinforced
7 www.australianminingservices.com.au
Australian Mining Product and Services Pty Limited
coupling of
GRIP-G. Have
the same
performance of
GRIP-G and with
higher pressure.
Two anchor rings
have progressive
anchoring effect,
it is easy on
pipes, as
pressure
increased, so
does the gripping
effect. GRIP-Z
offers high levels
of security by
locking pipes
together under
pressure. GRIP-
Z working
pressure up to
64 bar.
Temperature
range: -30℃ up
to 180℃,
material in
SS304, SS316
and SS316TI. It
suitable for most
applications in
building
construction, civil
engineering,
power,
machinery
component,
shipbuilding,
offshore
industries,
industrial
process pipe
work and others.
8 www.australianminingservices.com.au
Australian Mining Product and Services Pty Limited
Customized Model: GRIP-GS GRIP-GS is
Narrow Coupling narrow type of
Size: O.D.
φ76.1MM-φ377MM GRIP-G. Have
the same
Sealing: EPDM, performance of
NBR, VITON, GRIP-G.
SILICONE
SS quality: It’s suitable for
AISI304, narrow space
AISI316L, and applications
AISI316TI. for low pressure
stages of up to
16bar.
Suitable for pipes
O.D φ76.1mm---
377mm.
Suitable for pipes
material: Carbon
steel, stainless
steel, copper,
conifer, cast and
ductile iron,
GRP, asbestos
cement, HDPE,
MDPE, PVC,
CPVC, ABS and
other material.
Application:
Industrial
sector’s service
and control lines.
Plant
engineering
Process
technology. In
the module of a
water treatment
plant
9 www.australianminingservices.com.au
Australian Mining Product and Services Pty Limited
Axially restrained Model: GRIP-GT The GRIP-GT is
coupling with ideal for various
copper ring Size: O.D φ26.9- non-metal pipes
φ800.0mm
axially restrained
Sealing: connection.
EPDM,
NBR, Unique threaded
VITON, copper anchoring
SILICONE.
ring design
SS quality: enable the
AISI304, coupling connect
AISI316L, the pipes
AISI316TI.
properly without
slight scratch or
damage. The
coupling
connects the
pipe evenly.
Suitable for pipes
O.D φ26.9-
φ800.0mm
Axially restrained Model: GRIP-GTG The GRIP-GTG
coupling for metal is a perfect
and non-metal pipes Size: O.D φ26.9-
connection φ800.0mm solution for pipes
with different
Sealing: EPDM, materials
NBR, typically as metal
VITON, and non-metal
SILICONE.
ones. Suitable
SS quality: for pipes O.D
AISI304, φ26.9-φ800.0mm
AISI316L,
AISI316TI
Pull rod clamps Model: GRIP-LM The GRIP-LM
pipe coupling
Size: O.D φ304-
φ762mm including three to
four pull rods
Sealing: EPDM, which can
NBR, effectively
VITON, reduce the axial
SILICONE.
pull strength of
SS quality: pipes.
AISI304,
AISI316L, The perfect
AISI316TI. combination of
pull rods and
coupling greatly
lessen vibration,
lower noise as
10 www.australianminingservices.com.au
Australian Mining Product and Services Pty Limited
well as provide
ideal
compensation.
Easy and quick
installation make
GRIP-LM a
reliable choice
for you.
Suitable for pipes
O.D φ304-
φ762mm GRIP-
LM only can be
used on metal
pipes.
Double Lock Pipe Model: GRIP-RT The GRIP-RT
Coupling with Size: O.D φ26.9- combines all the
Side Outlet advantages of
φ2032mm
GRIP coupling
Sealing: technologies,
EPDM, with the added
NBR, benefit of a side
VITON,
outlet.
SILICONE.
SS quality: A simple, low-
AISI304, cost solution for
AISI316L, a wide range of
AISI316TI.
applications,
including venting,
sample-taking,
measurement
points and
system
extensions.
Suitable for pipes
O.D φ26.9-
φ2032mm
GRIP-RT can be
customized
according
customers’
requests.
Applicable for
below models:
GRIP-G, GRIP-
M, GRIP-R,
11 www.australianminingservices.com.au
Australian Mining Product and Services Pty Limited
GRIP-D, GRIP-Z
， GRIP-GT,
GRIP-GTG
Couplings for Model: GRIP-S Pneumatic
pneumatic Size: conveying
conveying tubes (diluted
O.D φ38.1-φ300
concentration
Sealing: light particles)
Black SBR Vacuum or
Silicone pressure
Viton
systems
SS quality: Specification of
430, standard
304L couplings:
Outside skin in
stainless steel
430 Black SBR
gasket -
30℃/+80℃ Zin
plated bolts
Stainless steel
304L,
conductivity strip
Suitable for pipes
O.D φ38.1-φ300
An economic
product designed
for low pressure
dust pipes.
Be different from
normal pipe
couplings, it is
professional in
dust pipes which
is constructed
from galvanized
steel and has a
SUS301
conductive sheet
inside.
It is more
economic and
widely used
overseas.
12 www.australianminingservices.com.au
Australian Mining Product and Services Pty Limited
The size now
can be from
DN40 to DN300,
the length is
100/150/200mm,
working pressure
5-10 bar.
Stainless steel It is mainly
Flexible adapter composed of
composed of
corrugated pipe,
net sleeve and
joint. The inner
tube is a thin
walled stainless
steel corrugated
pipe with a spiral
or annular
shape, and the
outer layer of the
corrugated pipe
is made of
stainless steel
wire of steel
tape. The joints
and flanges at
both ends of the
hose are
matched with the
fittings and
flanges of the
customer’s pipe.
Stainless Steel The advantages
Corrugated of metal
Expansion corrugated
expansion joint:
1, the
compensation
can compensate
the
thermal expansio
n: multi direction,
metal
compensator
is much better
than that of only
single
13 www.australianminingservices.com.au
Australian Mining Product and Services Pty Limited
compensation.
2, compensation
for installation
error: as the
system error is
unavoidable in
the process of
pipeline connecti
on, the fibre
compensator is
better compensat
ed for the
installation error.
3, noise
reduction and
vibration
reduction: fibre
fabric and
thermal
insulation cotton
body itself has
the function of
sound absorption
and vibration
isolation.
It can effectively
reduce the noise
and vibration
of boiler and fan
system.
4, no reverse
thrust: because
the main material
is fiber fabric,the
inability to
transfer. The use
of
fibre compensato
r can simplify the
design, avoid the
use of large
support, and
save a lot of
material and
labour.
14 www.australianminingservices.com.au
Australian Mining Product and Services Pty Limited
5, good high
temperature
resistance,
corrosion
resistance: the
selected
fluoroplastics,
organosilicon
materials have
good resistance
to high
temperature and
corrosion
resistance.
6, good sealing
performance: a
better production
and assembly
system, fibre
compensator can
guarantee no
leakage.
7, light body,
simple structure,
convenient
installation and
maintenance.
8, the price is
low, the quality is
excellent.
Metal corrugated
expansion joint
use:
The metal
corrugated
expansion joint
can compensate
for axial, lateral
and angular
directions, and
has
the characteristic
s of no thrust,
simplified
bearing design,
corrosion
15 www.australianminingservices.com.au
Australian Mining Product and Services Pty Limited
resistance, high
temperature
resistance,
noise reduction
and vibration
absorption. It is
especially
suitable for hot
air pipes and
dust pipes.
Stainless steel HOMEPRODUC
Flexible Adapter TS GRIP-FA
Stainless steel
Flexible Adapter
Stainless steel
Flexible Adapter
Stainless steel
Flexible Adapter
Technical
Parameter:
GRIP-FA 【
VIEW】
PRODUCT
DETAILS It is
mainly
composed of
composed of
corrugated pipe,
net sleeve and
joint. The inner
tube is a thin
walled stainless
steel corrugated
pipe with a spiral
or annular
shape, and the
outer layer of the
corrugated pipe
is made of
stainless steel
wire of steel
tape. The joints
and flanges at
both ends of the
hose are
matched with the
fittings and
16 www.australianminingservices.com.au
Australian Mining Product and Services Pty Limited
flanges of the
customers’ pipe.
Stainless Steel The product is
Dismantling suitable for the
connector pipe with flange
connection on
both sides. When
installing, adjust
the installation
length of the two
ends of the
product and the
flange.
Thoroughly tighte
n the gland bolts
diagonally to
make it a whole
and have a
certain
displacement,
which is
convenient
for adjusting
according to the
size of the field
when
installation and
maintenance,
and the axial
thrust can be
transmitted to the
entire pipeline
during operation.
Flexible Rubber Fibber joint flange
joints (flanging Material:
type)
1. Out/inner rubber:
NR, NBR, EPDM
2. Flange: Q235
SS304
SS316
the flange is slotted.
3. Pressure: 10bar,
16bar and 25bar
4. Temperature: -
30℃—+250℃
Suitable media:
Air compressed
air,
17 www.australianminingservices.com.au
Australian Mining Product and Services Pty Limited
water,
sea water,
hot water,
oil, alkali etc.
Stainless Steel Material: SS304/ Stainless steel
Band Repair Galvanized steel band repaired
Clamp s2 clamp is good at
(Double-Lock- repairing pin
Type) holes and breaks
caused by aging
or rusting, which
can seal
under pressure
and no need of
changing pipes.
Have
advantages of
safe, convenient
and efficiency,
can be installed
without any
other tools. It is
highly optimized
for general use.
Stainless Steel The metal corrugated
Corrugated expansion joint can
Expansion compensate for axial,
lateral and angular
Jointing directions, and has the
characteristics of no
thrust, simplified
bearing design,
corrosion resistance,
high temperature
resistance, noise
reduction and vibration
absorption. It is
especially suitable for
hot air pipes and dust
pipes.
Flexible Rubber Material: Flexible rubber
joints (Flexibacter joint, which is
damping type) 1. Out/inner rubber: also called
NR, NBR, EPDM
vibration absorbe
2. Key Frame: Nylon r, pipe vibration
cord fabric absorber, flexible
joint and hose
3. Pressurized ring:
Steel wire strand joint and so on,
is pipe joint with
high
18 www.australianminingservices.com.au
Australian Mining Product and Services Pty Limited
4. Flange： flexibility, high air
Q235/SS304, SS316. tightness and
good medium-
resistance
and weather
resistance.
Features:
1. Small in size,
light in weight,
good in
flexibility, conven
ient for
installation and
maintenance.
2. During
installation,
transverse, axial
and angular
displacement will
occur and it is
not restricted
when the user
pipe is non-
concentric or the
flange is not
paralleled.
3. The structure-
borne noise can
be reduced while
working, and the
vibration
absorption capac
ity is strong.
Dry Break Dry Break
Coupling Couplings are
supplied into a
diverse range of
industries
including ship to
shore transfer,
offshore
exploration
platforms,
chemical
industry,
19 www.australianminingservices.com.au
Australian Mining Product and Services Pty Limited
pharmacy,
aviation and
smelting where
the accidental
spillage of liquids
must be avoided.
Dry break
couplings have
the following
characteristics:
• Quick
coupling/de-
coupling without
significant loss of
media
• Reduce the
possibility of
human error in
transfer
operations
• Couplings
reduce spillage
to virtually zero
• Ease of
handling
• Prevent cross-
contamination
between
products
• Safety of
human health
and the
environment
How it works:
Turning the hose
unit 15°
clockwise locks
the units
together, The
valves are still
closed and are
20 www.australianminingservices.com.au
Australian Mining Product and Services Pty Limited
not opened until
a further rotation
of 90° has been
performed and
then the product
flow is
guaranteed. To
close the valve
and to unlock the
units, reverse the
procedure.
Technical Details
Sizes: 1”(DN19-
DN32) to
4”(DN100).
Materials:
Aluminium,
gunmetal, brass
and stainless
steel, others on
request
Seals:
FKM(Viton),
NBR(nitrile),
EPDM, other
materials on
request.
Working
pressure: PN10-
PN25.
Test pressure:
Working
pressure +50%
Safety factor:
5:1.
End connections:
BSP-and NPT-
threads. and
TTMA-flanges
(available for
both tank and
hose units).
Other threads
21 www.australianminingservices.com.au
Australian Mining Product and Services Pty Limited
and flanges on
request.
Compatibility:
NATO STANAG
3756.
Flexible Rubber Flexible rubber
joints joint, which is
also called
vibration
absorber, pipe
vibration
absorber, flexible
joint and hose
joint and so on,
is pipe joint with
high flexibility,
high air tightness
and good
medium-
resistance and
weather
resistance.
Features:
1. Small in size,
light in weight,
good in flexibility,
convenient for
installation and
maintenance.
2. During
installation,
transverse, axial
and angular
displacement will
occur and it is
not restricted
when the user
pipe is non-
concentric or the
flange is not
paralleled.
22 www.australianminingservices.com.au
Australian Mining Product and Services Pty Limited
3.The structure-
borne noise can
be reduced while
working, and the
vibration
absorption
capacity is
strong.
23 www.australianminingservices.com.au
Product Photo Product Name Product Specification Product Feature
Socket Repair Clamps Connection: Bolts & Emergency Repair Clamps can be
P160, Repair Coupling, Nuts used on most Plastic Pipes, Iron &
Steel and AC Pipe. You can now
Encapsulation Collars, Structure: Universal repair Straight Pipe, Pipe Tee, Pipe
Bends. Pipe Unions, Pipe Joints,
Split Sleeve for PE, PVC Flexible or Rigid: Flexible Reducing Tee and many more Our
Pipe, Leaking Pipe Quick range covers most popular sizes
Repair Material: Iron from DN20mm to DN1600 mm.
Standard: Standard The benefits of repair clamps
including: Limited Downtime Limited
Application: Leaking Water Loss Limited Pressure Loss
Pipe Repair (under most circumstances) Limited
Time Wastage Limited Cutting Costs
Limited Replacement Components
Limited Additional Component
Required Limited Customer Claims
Socket Repair Clamps Connection: Bolts & It can be used on most Plastic Pipes,
H150, Nuts Iron & Steel and AC Pipe.
Repair Coupling, Structure: Universal You can now repair Straight Pipe,
Encapsulation Collars Pipe Tee, Pipe Bends. Pipe Unions,
Flexible or Rigid: Flexible Pipe Joints and many more. Our
range covers most popular sizes
Material: Iron from DN20mm to DN1600mm.
Standard: Standard The benefits of our clamps including:
Limited Downtime Limited Water
Application: Leaking Loss Limited Pressure Loss (under
Pipe Quick Repair most circumstances) Limited Time
Wastage Limited Cutting Costs
Limited Replacement Components
Limited Additional Component
Required Limited Customer Claims
https://www.australianminingservices.com.au/ Page 1
Product Photo Product Name Product Specification Product Feature
Repair Clamp H500, Connection: Bolts & Emergency Repair Clamps can be
Repair Collars, Nuts used on most Plastic Pipes, Iron &
Encapsulation Collars Steel and AC Pipe. You can now
Structure: Universal repair Straight Pipe, Pipe Tee, Pipe
Bends. Pipe Unions, Pipe Joints,
Flexible or Rigid: Flexible Reducing Tee and many more Our
range covers most popular sizes
Material: Iron from DN20mm to DN1600 mm.
Repair Clamp H500, Repair Collars,
Standard: Standard Encapsulation Collars
Application: Leaking The benefits of our brand repair
Pipe Quick Repair clamps including: Limited Downtime
Limited Water Loss Limited Pressure
Loss (under most circumstances)
Limited Time Wastage Limited
Cutting Costs Limited Replacement
Components Limited Additional
Component Required Limited
Customer Claims
Socket Repair Clamps Connection: Bolts & We are the supplier of Leaking Pipe
P315 for PE, PVC Pipe Nuts Repair Clamps for Water and Gas
Supply Pipeline Networks in over 100
Structure: Universal Chinese Cities and some foreign
countries including UK, Australia, Sri
Flexible or Rigid: Flexible Lanka and so on. Socket Repair
Clamps P315 for PE, PVC Pipe.
Material: Iron
of products: - consist of the two half
Standard: Standard cast iron tubes with good quality
rubber seal inside - the most
Application: Leaking economical and efficient way for the
Pipe Quick Repair rush repair of the leak or burst of the
pipeline. - no need disassembly
from the body of pipeline after
repair
https://www.australianminingservices.com.au/ Page 2
Product Photo Product Name Product Specification Product Feature
Pipe Repair Clamp Z200, Connection: Bolts & We are the supplier of Leaking Pipe
Pipe Repair Coupling, Nuts Repair Clamps for Water and Gas
Supply Pipeline Networks in foreign
Repair Pipe Clamp for Structure: Universal countries including UK, Australia, Sri
Concrete Pipe. Leaking Lanka and so on. Pipe Repair Clamp
Pipe Quick Repair. Flexible or Rigid: Flexible Z200, Pipe Repair Coupling, Repair
Pipe Clamp for Concrete Pipe.
Material: Iron Leaking Pipe Quick Repair.
Standard: Standard of products: - consist of the two half
cast iron tubes with good quality
Application: Leaking rubber seal inside - the most
Pipe Quick Repair economical and efficient way for the
rush repair of the leak or burst of the
pipeline. - no need disassembly
from the body of pipeline after
repair
Repair Clamps Connection: Thread
H300X500, Repair We are the supplier of Leaking Pipe
Collars, Encapsulation Application: Leaking Repair Clamps for Water and Gas
Collars. Pipe Quick Repair Supply Pipeline Networks in over 100
Chinese Cities and some foreign
Suitable for: Straight Ci, countries including UK, Australia, Sri
Di Pipe Lanka and so on.
Pipe Od: Dn300 Clamp of products: - consist of the two half
cast iron tubes with good quality
Length: 500mm Body rubber seal inside - the most
economical and efficient way for the
Material: Ductile Iron rush repair of the leak or burst of the
pipeline. - no need disassembly
from the body of pipeline after
repair
https://www.australianminingservices.com.au/ Page 3
Product Photo Product Name Product Specification Product Feature
Repair Collars P200, Connection: Bolts &
Encapsulation Collars, Nuts We are the supplier of Leaking Pipe
Repair Clamps, Pipe Repair Clamps for Water and Gas
Repair Clamps, Repair Structure: Universal Supply Pipeline Networks in over 100
Coupling Chinese Cities and some foreign
Flexible or Rigid: Flexible countries including UK, Australia, Sri
Lanka and so on.
Material: Iron
of products: - consist of the two half
Standard: Standard cast iron tubes with good quality
rubber seal inside - the most
Application: Leaking economical and efficient way for the
Pipe Quick Repair rush repair of the leak or burst of the
pipeline. - no need disassembly
from the body of pipeline after
repair
Repair Clamps Connection: Bolts & Emergency Repair Clamps can be
Dn1000X500 for Carbon Nuts used on most Plastic Pipes, Iron &
Steel Pipe Steel and AC Pipe. You can now
Structure: Universal repair Straight Pipe, Pipe Tee, Pipe
Flexible or Bends. Pipe Unions, Pipe Joints,
Reducing Tee and many more Our
Rigid: Flexible range covers most popular sizes
from DN20mm to DN1600mm
Material: Qt450-10
(Ductile Iron) The benefits of repair clamps
including: Limited Downtime Limited
Standard: Standard Water Loss Limited Pressure Loss
(under most circumstances) Limited
Usage: Water or Gas Time Wastage Limited Cutting Costs
Pipeline Leakage Limited Replacement Components
Stopper Limited Additional Component
Required Limited Customer Claims
https://www.australianminingservices.com.au/ Page 4
Product Photo Product Name Product Specification Product Feature
Socket Repair Clamps Connection: Bolts & Emergency Repair Clamps can be
Used for Leakage Stop Nuts used on most Plastic Pipes, Iron &
or Repair of Broken for Steel and AC Pipe. You can now
Ductile Cast Iron Pipe or Structure: Universal repair Straight Pipe, Pipe Tee, Pipe
Cast Iron Pipe (DI, CI) Bends. Pipe Unions, Pipe Joints and
H80 Flexible or Rigid: Flexible many more. Our range covers most
popular sizes from DN20mm to
Material: Iron DN1600mm
Standard: Standard The benefits of repair clamps
including: Limited Downtime Limited
Application: Leaking Water Loss Limited Pressure Loss
Pipe Quick Repair (under most circumstances) Limited
Time Wastage Limited Cutting Costs
Limited Replacement Components
Limited Additional Component
Required Limited Customer Claims
Reducing Straight Type: Reducing We are the supplier of Leaking Pipe
Clamps P110X90, Repair Repair Clamps for Water and Gas
Clamps Connection: Bolts & Supply Pipeline Networks in foreign
Nuts countries including UK, Australia, Sri
Lanka and so on. Reducing Straight
Material: Iron Clamps P110X90, Repair Clamps
Shape: Reducing Tee of products: - consist of the two half
cast iron tubes with good quality
Lateral: 90°Tee rubber seal inside - the most
economical and efficient way for the
Finish: Epoxy Power rush repair of the leak or burst of the
Coating pipeline. - no need disassembly
from the body of pipeline after
repair
https://www.australianminingservices.com.au/ Page 5
The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.
Discover the best professional documents and content resources in AnyFlip Document Base.
Search