Книга Калибры патронов и оружия в Таблицах ПМК

ПРИЛОЖЕНИЕ Е17

Таблица IX (первая часть)

698

TABLE IX

C.I.P. Dust shot cartridges DATE 94-06-01

REV. 00-06-07

Calibres of weapons for dust shot cartridges.

The classification is in growing and in alphabetical order according to the designation of the calibre.

Transducer method

________________________________________________________________________________________

Calibre Country of origin Date Rev. Bore M PTmax PK PE

‡ (mm)

________________________________________________________________________________________

35 GR DE 93-05-28 94-06-01 4,3 8,5 800 920 1040
35 R GR DE 93-05-28 94-03-01 4,3 8,5 800 920 1040
8 mm GR DE 93-05-28 94-03-01 4,3 7,0 1200 1380 1560
380 GR/9 mm R GR IT/DE 93-05-28 94-03-01
44 Mag. GR IT 93-05-28 00-06-07 17,5 400 460 520
45 L GR IT 93-05-28 93-10-20

__________________________________________________________________________________________________

PTmax = maximum average pressure (bar)
PK = 1,15 Pmax = maximum statistical individual pressure (bar)
PE = 1,30 Pmax = mean proof pressure (bar)
M = location of the pressure take (mm)
__________________________________________________________________________________________________

2011 Reproduction forbidden as well as in the form of extracts without approval of C.I.P. 1

ПРИЛОЖЕНИЕ Е18

Таблица IX (вторая часть)

700

C.I.P. 35 GR TAB. IX
Date 93-05-28
H2 Country of Origin: DE Revision 94-06-01

G CARTRIDGE MAXI CHAMBER MINI
E1
R1 Lengths = 25.50 Lengths = 24.00
L1 = 25.30 L1 =
i L2 = L2 =
F G1 L3 1) = L3 1)
L4 =
H2 L5 =
D L6

Scale 1.5:1 Case Head 1.30 Breech =
Dimensions in << mm >> R 1) = 9.75 R =
R1 = R1 =
Dimensions and Tolerances for Proof Barrels R3 = 3.20 R2 =
see Appendix CR 6. E= 8.20 R3 =
E1 = 1.00 r
e min = 40°
P1 G= 0.40
L6 f= 45°
L3 E=

Powder Chamber Powder Chamber

E=

P1 1) = 9.85 -0.05 P1 1) = 9.90
P2 =
E P2 =
e min
E Junction Cone Junction Cone
R D= D=
f S= S=

r1 min = r1 max =
r2 = r2 =

Collar = 9.75 Collar = 9.80
H1 = H1 =
H2 1) H2 1)

h Projectile Commencement of Rifling
s G1 =
G G2 = G1 1)* = 6.00
F=
L3+G = G 1)* = 11.85

D = 90°

h = 1.90

s * = 11.00

Pressures (Energies) i 1) = 45°

Method Transducer w=

Pmax = 800 bar Barrel
F 1)*
PK = 920 bar Z 1) = 4.30
= 4.30
PE = 1040 bar

P1 M = 8.50
L3
Grooves =
b = 14.52 mm²
N =
u =
Q

Miscellaneous Dimensions
Fe =
delta L =

Notes: 1) Check for safety reasons
* Basic dimensions

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

C.I.P. 35 R GR TAB. IX
Date 93-05-28
H2 Country of Origin: DE Revision 94-06-01

R1 CARTRIDGE MAXI CHAMBER MINI

i Lengths = 25.80 Lengths = 26.00
F G1 L1 = 25.30 L1 =
L2 = L2 =
H2 L3 1) = L3 1)
D L4 =
R1 L5 =
L6
Scale 1:1
Dimensions in << mm >> Case Head 1.90 Breech = 1.90
R 1) = 11.30 -0.10 R 1) = 11.40
Dimensions and Tolerances for Proof Barrels R1 = =
see Appendix CR 6. R3 = R1 =
E= R2 =
E1 = R3
e min = r
G=
P1 f= 0.40
L6 E= 45°
L3

Powder Chamber Powder Chamber

E=

P1 1) = 9.50 P1 1) = 9.55
P2 =
E P2 =

R
f

Junction Cone Junction Cone
D= D=
S= S=

r1 min = r1 max =
r2 = r2 =

Collar = 9.50 Collar = 9.55
H1 = H1 =
H2 1) H2 1)

Projectile Commencement of Rifling
G1 =
G2 = G1 1)* = 6.00
F=
L3+G = G 1)* = 11.85

D = 90°

h h = 1.78
s
G s * = 11.00

Pressures (Energies) i 1) = 45°

Method Transducer w=

Pmax = 800 bar Barrel
F 1)*
PK = 920 bar Z 1) = 4.30
= 4.30
PE = 1040 bar

M = 8.50

P1 Grooves =
L3 b =
N =
u = 14.52 mm²
Q

R Miscellaneous Dimensions
Fe =
delta L =

Notes: 1) Check for safety reasons
* Basic dimensions

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

C.I.P. 8 mm GR TAB. IX
Date 93-05-28
H2 Country of Origin: DE Revision 94-06-01
G
CARTRIDGE MAXI CHAMBER MINI
E1
R1 Lengths = 20.30 Lengths = 19.20
L1 = 19.90 L1 =
i L2 = L2 =
F G1 L3 1) = L3 1)
L4 =
H2 L5 =
D L6

Scale 1.5:1 Case Head 1.27 Breech =
Dimensions in << mm >> R 1) = 8.40 R =
R1 = R1 =
Dimensions and Tolerances for Proof Barrels R3 = 3.33 R2 =
see Appendix CR 6. E= 6.55 R3 =
E1 = 0.80 r
e min = 30°
P1 G= 0.20
L6 f= 45°
L3 E=

Powder Chamber Powder Chamber

E=

E P1 1) = 8.40 -0.05 P1 1) = 8.45
e min P2 =
E P2 =
R
f

Junction Cone Junction Cone
D= D=
S= S=

r1 min = r1 max =
r2 = r2 =

Collar = 8.40 Collar = 8.45
H1 = H1 =
H2 1) H2 1)

Projectile Commencement of Rifling
G1 =
G2 = G1 1)* = 6.00
F=
h L3+G = G 1)* = 10.85
s
G D = 90°

h = 1.23

s * = 10.00

Pressures (Energies) i 1) = 45°

Method Transducer w=

Pmax = 1200 bar Barrel
F 1)*
PK = 1380 bar Z 1) = 4.30
= 4.30
PE = 1560 bar

P1 M = 7.00
L3
Grooves =
b = 14.52 mm²
N =
u =
Q

Miscellaneous Dimensions
Fe =
delta L =

Notes: 1) Check for safety reasons
* Basic dimensions

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

C.I.P. 380 GR / 9 mm R GR TAB. IX
Date 93-05-28
Country of Origin: IT/DE Revision 94-03-01

CARTRIDGE MAXI CHAMBER MINI

Lengths = 18.00 Lengths = 18.50
L1 = 17.00 L1 =
L2 = L2 =
L3 1) = L3 1)
L4 =
L5 =
L6

Case Head Breech

R 1) = 2.00 -0.10 R 1) = 2.00

R1 = 11.50 R1 = 11.60

R3 = R2 =

H2 E= R3 =

E1 = r=

e min =

R G=
f
f = 0.38
E P1
L6 E = 45°
L3
Powder Chamber Powder Chamber

R1 E =
P1 1) = 9.58 P1 1) = 9.60

P2 = P2 =

Junction Cone Junction Cone
D= D=
S= S=

r1 min = r1 max =
r2 = r2 =

Collar = 9.57 Collar = 9.60
H1 = H1 =
H2 1) H2 1)

i Projectile Commencement of Rifling
G1 =
F G1 h G2 = G1 1)* = 8.00
H2 s F=
G L3+G = G 1)* = 8.00

D = 90°

h = 0.80

s * = 6.80

Pressures (Energies) i 1) = 45°

w=

Barrel
D F 1)* = 5.60

Z 1) = 5.60
P1
L3

R R1 Grooves = 24.63 mm²
b =
Scale 1.5:1 N =
Dimensions in << mm >> u =
Q
Dimensions and Tolerances for Proof Barrels
see Appendix CR 6. Miscellaneous Dimensions
Fe =
delta L =

Notes: 1) Check for safety reasons
* Basic dimensions

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

C.I.P. 44 Mag. GR TAB. IX
Date 93-05-28
Country of Origin: IT Revision 00-06-07

CARTRIDGE MAXI CHAMBER MINI

Lengths = 32.50 Lengths = 33.00
L1 = 32.00 L1 =
L2 = L2 =
L3 1) = L3 1)
L4 =
L5 =
L6

Case Head 1.42 Breech = 1.45
R 1) = 12.88 R 1) = 13.00
R1 = R1 =
H2 R3 = 2.06 R2 =
E= 11.30 R3 =
G E1 = r
E1 e min = 0.50
R1 P1 G= 45°
L6 f= 0.40
L3 E= 45°

Powder Chamber Powder Chamber

E=

P1 1) = 11.57 P1 1) = 11.60
P2 =
E E P2 =
R e min
f

Junction Cone Junction Cone
D= D=
S= S=

r1 min = r1 max =
r2 = r2 =

Collar = 11.50 Collar = 11.53
H1 = H1 =
H2 1) H2 1)

Projectile Commencement of Rifling
G1 =
i G2 = G1 1)* = 8.00
F=
L3+G = G 1)* = 9.00

h D = 90°
s
F G1 G h = 1.76
H2
s * = 7.80

Pressures (Energies) i 1) = 45°

Method Transducer w=

D Pmax = 400 bar Barrel
F 1)*
PK = 460 bar Z 1) = 5.60
= 5.60
PE = 520 bar

P1 M = 17.50
L3
Grooves =
R1 b = 24.63 mm²
N =
Scale 1:1 u =
Dimensions in << mm >> Q

Dimensions and Tolerances for Proof BarrelsR Miscellaneous Dimensions
see Appendix CR 6. Fe =
delta L =

Notes: 1) Check for safety reasons
* Basic dimensions

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

C.I.P. 45 L GR TAB. IX
Date 93-05-28
Country of Origin: IT Revision 93-10-20

CARTRIDGE MAXI CHAMBER MINI

Lengths = 31.10 Lengths = 31.50
L1 = 29.40 L1 =
L2 = L2 =
L3 1) = L3 1)
L4 =
L5 =
L6

Case Head 1.20 Breech = 1.20
R 1) = 12.90 R 1) = 13.00
R1 = R1 =
H2 R3 = 0.30 R2 =
R1 E= 45° R3 =
E1 = r
e min =
P1 G=
L6 f=
L3 E=

Powder Chamber Powder Chamber

E=

P1 1) = 12.00 P1 1) = 12.03
P2 =
E P2 =

R
f

Junction Cone Junction Cone
D= D=
S= S=

r1 min = r1 max =
r2 = r2 =

Collar = 12.00 Collar = 12.03
H1 = H1 =
H2 1) H2 1)

Projectile Commencement of Rifling
G1 =
i G2 = G1 1)* = 8.00
F=
L3+G = G * = 9.25

h D = 90°
s
G h = 2.01

F G1 s * = 8.05
H2
Pressures (Energies) i 1) = 45°

w=

D Barrel
F 1)*
P1 Z 1) = 5.60
L3 = 5.60

R1 Grooves = 24.63 mm²
b =
Scale 1:1 N =
Dimensions in << mm >> u =
Q
Dimensions and Tolerances for Proof Barrels
see Appendix CR 6.R Miscellaneous Dimensions
Fe =
delta L =

Notes: 1) Check for safety reasons
* Basic dimensions

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

ПРИЛОЖЕНИЕ Е19

Таблица X (первая часть)

707

TABLE X

C.I.P. Cartridges for other weapons DATE 94-06-01

REV. 09-05-05

Calibres of cartridges for other weapons.

The metric calibres are classed before the calibres originally designated in inches.
The classification is in growing and in alphabetical order according to the designation of the calibre.

Transducer method

________________________________________________________________________________________

Calibre Country of origin Date Rev. M PTmax/Emax PK/EK PE/EE

________________________________________________________________________________________

4 mm M 20 DE 07-05-14 02-05-15 10,50 7,7 J 8,0 J 8,3 J
6,2/7 FR 01-04-24 04-05-18 60 J 64 J 66 J
8,8 x 10 S.A.P.L. FR 96-03-05 82,25 6,4 J 6,6 J
10 x 23 T RU 05-05-25 99-04-20 25,0 6J 633 715
11,6 SAFEGOM FR 96-03-19 98-06-09 17 550 40 J 45 J
12 mm x 39 FR 98-01-27 04-09-27 12,5 35 J 107 J 110 J
14 mm Piexon DE 02-05-02 12,5 100 J 203 J 209 J
00-06-07 10,5 190 J 85 J 87 J
18 x 45 RU 09-05-05 10,5 79 J 4083 4615
02-05-15 3550 100 J 102 J
18 x 81 CZ 99-02-22 98-06-09 12,5 93 J 4945 5590
98-06-09 4300 160 J 165 J
18,5 x 55 RU 09-05-05 98-06-09 150 J 125 J 130 J
02-05-15 115 J 125 J 130 J
20 mm x 67,5 (6,3/14) DE 00-03-13 02-05-15 115 J 345 330
08-04-15 300 345 390
MR35 Punch cal.12-28,5 CZ 96-03-19 94-06-01 300 176 J
02-05-15 160 J 321 J
MR35 Punch cal.12-35 FR 96-02-21 690 330 J
300 J 780
MR35 Punch cal.15-35 FR 96-02-21 600 500

380 Alfa CZ 01-05-17 475 J

380 ME Gum IT 99-08-04
40 x 46 US 07-05-14
44/83 FR 94-03-01
44/83 SP FR 00-03-02
45 Rubber RU 09-05-05
56 Cougar FR 07-05-14

__________________________________________________________________________________________________

PTmax = maximum average pressure (bar)
PK = 1,15 Pmax = maximum statistical individual pressure (bar)
PE = 1,30 Pmax = mean proof pressure (bar)
Emax = maximum average energy (J = Joule)
EK = 1,07 Emax = maximum statistical individual energy (J = Joule)
EE = 1,10 Emax = mean proof energy (J = Joule)
M = location of the pressure take (mm)
Notice: For conformal or tangential transducers the location (M) is that defined by the manufacturer.
__________________________________________________________________________________________________

2011 Reproduction forbidden as well as in the form of extracts without approval of C.I.P. 1

ПРИЛОЖЕНИЕ Е20

Таблица X (вторая часть)

709

C.I.P. 4mm M 20 TAB. X
Date 07-05-14
Revision
Country of Origin: DE

CARTRIDGE MAXI CHAMBER MINI

Lengths = 2.08 Lengths = 2.03
L1 = 3.55 L1 = 3.50
L2 = 7.20 L2 = 7.40
L3 = L3
L4 = 9.50
L5 =
L6

Case Head 5.73 Breech = 5.73
R= R =
P1 G1 R1 = R1 =
L1 R3 = R2 =
E= R3 =
L2 r
L3 E1 =
H2 L6 e min =
G=
H1 f=
P2 E=

Powder Chamber Powder Chamber
E=
R1 P1 = 5.73 P1 = 5.73
P2 = 5.60 P2 = 5.60

Junction Cone 5.00 Junction Cone 23°
D= 4.87 D=
S= 4.33 S=

r1 min = r1 max =

r2 = r2 =

Collar = Collar = 5.00
H1 = H1 = 4.90
H2 H2

Projectile Commencement of Rifling
G1 = G1 = 4.90
G2 = G = 0.48
F= D =
L3+G = h=
s=
i Pressures (Energies) i = 40°
w=
G1 P1 Energy
G
Emax = 7.5 Joule Barrel
L1 F
F H2 L2 EK = 8.0 Joule Z = 4.10
L3 = 4.28
H1 EE = 8.3 Joule
P2
Grooves =
R1 b =
N =
u = mm²
Q

Scale 2.41:1 Miscellaneous Dimensions
Dimensions in << mm >> Fe =
delta L =
Dimensions and Tolerances for Proof Barrels
see Appendix . Notes:

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

C.I.P. 6,2/7 TAB. X
Date 01-04-24
H2 Country of Origin: FR Revision 02-05-15
R1
CARTRIDGE MAXI CHAMBER MINI
H2 F
R1 Lengths = 7.40 Lengths = 7.50 +0.10
L1 = 7.25 L1 =
Scale 2:1 L2 = L2 =
Dimensions in << mm >> L3 1) = L3 1)
L4 =
Dimensions and Tolerances for Proof Barrels L5 =
see Appendix CR 5. L6 1)

Case Head 0.55 Breech = 0.60
R= 7.80 R 1) = 7.90
R1 = R1 =
R R3 = R2 = 0.30
P1 E= R3 =
E1 = r
L6 e min =
L3 G=
f=
E=

Powder Chamber Powder Chamber

E=

P1 = 6.20 P1 1) = 6.25
P2 = 6.20
P2 =

Junction Cone Junction Cone
D= D=
S= S=

r1 min = r1 max =
r2 = r2 =

Collar = Collar = 6.25
H1 = H1 =
H2 1) H2 1)

G1 r Projectile Commencement of Rifling
G1 = G1 * = 6.30
G2 = G=
F= D =
L3+G = h=
s=
R Pressures (Energies) i=
P1 w=
Energy
L3
Emax = 60.0 Joule Barrel
F*
EK = 64.0 Joule Z = 6.30
=
EE = 66.0 Joule

Grooves = mm²
b =
N =
u =
Q

Other Indications
Fe =
delta L =

Notes: 1) Check for safety reasons
* Basic dimensions

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

C.I.P. 8,8 x 10 S.A.P.L. TAB. X
Date 96-03-05
Country of Origin: FR Revision 04-05-18

CARTRIDGE MAXI CHAMBER MINI

Lengths = Lengths = 8.90
= L11)* =
L1 = 10.85 L2 =
L2 = 15.80 L3
L31) =
L4 =
L5
L6

Case Head 1.50 Breech =
R= 11.18 R =
R1 = R1 =
R3 = 0.38 R2 =
E= 35° R3 =
E1 = r
e min =

G=
f=

E=

Powder Chamber Powder Chamber

P1 = 9.63 E = 9.63
P2 = P11) =

P2 =

Junction Cone Junction Cone

D= D=
S= S=
r1 min = r1 max =
r2 = r2 =

Collar = Collar =
H1 = H1 =
H2 H2

Projectile 8.80 Commencement of Rifling
G1 = 8.43 G1 =
G2 = 8.49 G=
G3 =
D1 =
Height of Projectile h=
s=
L7 = 8.10 i=
w=

Energy = 6.0 Joule Barrel =
Emax = 6.4 Joule F =
EK = 6.6 Joule Z
EE

Scale 2:1 Notes : 1) Check for safety reasons
* Basic dimensions
Dimensions in « mm »
Dimensions and tolerances for Proof Barrels

see appendix: CR 2

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

C.I.P. 10 x 23 T TAB. X
Date 05-05-25
H2 Country of Origin: RU Revision
G
CARTRIDGE MAXI CHAMBER MINI
E1
R1 Lengths = 22.70 Lengths = 21.20
L1 = 23.00 L1 =
i L2 = L2 =
F G1 L3 1) = 23.30 L3 1)
L4 =
H2 L5 =
D L6 1)
R1
Case Head 1.27 Breech = 10.00
Scale 1:1 R= 9.96 R =
Dimensions in << mm >> R1 =
R1 = 2.98 R2 =
Dimensions and Tolerances for Proof Barrels R3 = 8.79 R3 =
see Appendix CR 1. E= 0.90 r
E1 = 35°
E e min = 0.30
R 45°
f G=
f=
E E=
e min P1
Powder Chamber Powder Chamber
L3
L6 E = 2.98

P1 = 9.93 P1 1) = 9.98
P2 =
P2 =

Junction Cone Junction Cone
D= D=
S= S=

r1 min = r1 max =

r2 = r2 =

Collar = 9.62 Collar = 9.65
H1 = H1 =

H2 1) H2 1)

E Projectile 43.00 Commencement of Rifling
P1 h G1 = G1 = 8.00
L3 s G2 =
G F= G = 20.00
L3+G 1) = D = 90°
h = 0.82
Pressures (Energies) s = 19.25

Method Transducer i = 45°

w=

Pmax = 550 bar Barrel
F
PK = 633 bar Z = 6.50
=
PE = 715 bar

M = 10.50

Grooves 33.17 mm²
b=
N=
u=
Q=

Miscellaneous Dimensions
Fe =

delta L =

Notes: 1) Check for safety reasons

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.



C.I.P. 11,6 SAFEGOM TAB. X
Date 96-03-19
Country of Origin: FR Revision 99-04-20

CARTRIDGE MAXIMALE

Dimens. Value Toler.

t = 1.80 - 0.10

e = 14.20 - 0.20

d = 36.50 - 0.10

h = 37.80 - 0.05

l1 = 41.55 - 0.20

l2 = 42.55 - 0.10

f = 9.55 - 0.05

number of cells 6

CHAMBER MINIMALE

Dimens. Value Toler.

T = 1.50 + 0.05
D = 38.20 + 0.10
L1 = 41.70 + 0.10
L2 = 42.60 + 0.05
B = 11.60 + 0.03

Energy EE
Emax EK 45

Joule
35 40

Scale 1:1 Notes :

Dimensions in « mm »
Dimensions and tolerances for Proof Barrels:

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

C.I.P. 12 mm x 39 TAB. X
Date 98-01-27
Country of Origin: FR Revision 98-06-09

CARTRIDGE MAXIMALE

Dimens. Value Toler.
d 1) = 12.00 - 0.11
g = 13.60 - 0.40
t 1) = 1.55 - 0.35
h = 11.75 - 0.38
l = 39.00 - 2.50

CHAMBER MINIMALE Energy EE
Emax EK 110
Dimens. Value Toler.
D1) = 12.05 + 0.10 Joule
G1) = 13.70 + 0.10 100 107
T1) = 1.55 + 0.10
H1) = 11.80 + 0.10
B1) = 10.20 + 0.50
D11) = 10°30’ max
L1) = 39.00 + 2.00

Headspace Proof Barrel
Fe = 0.10 with bascule
Fe1) = 0.20 automatic
Fe1) = 0.35

Scale 1:1

Dimensions in « mm » Notes : 1) Check for safety reasons
Dimensions and tolerances for Proof Barrels:

See Appendix CR 4.

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

C.I.P. 14 mm Piexon TAB. X
Date 02-05-02
Country of Origin: DE Revision 04-09-27

CARTRIDGE MAXI CHAMBER MINI

Lengths = 11.70 Lengths = 11.80
L1* = 18.30 L1 * = 18.50
L2 = L2 =
L3 1) = 16.50 L3 1)
L4 =
L5 =
L6

Case Head 4.05 Breech = 4.05
R= 16.25 R = 16.35
R1 = R1 =
R3 = R2 =
E= R3 =
E1 = r
e min =

G=
f=

E=

Powder Chamber Powder Chamber
E=
P1 = 13.41 P11) = 13.43
P2* = 13.41 P2 * = 13.43

Junction cone 9.58 Junction cone

D= D=
S= S=
r1 min = r1 max =
r2 = r2 =

Collar = Collar = 9.60
H1 * = H1 * = 9.60
H21) H2 1)

Projectile Commencement of Rifling
G1 = G1 1) * =
G2 = 9.00
G3 =
G=

D1 =

h=

s=

i=

w=

Energies 190 Joule Barrel = 9.00
Emax = 203 Joule F 1) * =
EK = 209 Joule Z
EE =

Scale 2:1 Note: 1 Check for safety reasons
* Basic dimensions
Dimensions in « mm »
Dimensions et tolerances for Proof Barrels:

See Appendix CR 1.

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

C.I.P. 18 x 45 TAB. X
Date 09-05-05
H2 Revision
Country of Origin: RU
E1
R1 CARTRIDGE MAXI CHAMBER MINI

H2 Lengths = 45.00 Lengths = 45.00 +0.39
L1 = L1 =
R1 L2 = L2 =
L3 1) = L3 2)
Scale 1.18:1 L4 =
Dimensions in << mm >> L5 =
L6
Dimensions and Tolerances for Proof Barrels
see Appendix . P1 Case Head 1.50 Breech = 18.00
L3 R= 18.00 R =
R1 = R1 =
EG R3 = 5.50 R2 =
R E= 15.00 R3 =
r
E1 = 2.50
e min = 45°
G=
f=
E=

Powder Chamber Powder Chamber
E=
e min P1 1) = 18.00 P1 = 18.00
P2 = 18.00 P2 =

Junction Cone Junction Cone
D= D=
S= S=

r1 min = r1 max =

r2 = r2 =

Collar = Collar = 18.00 +0.18
H1 = H1 =
H2 1) H2 2)

Projectile Commencement of Rifling
G1 = G1 =
G2 = G=
F= D =
L3+G = h=
s=
P1 Pressures (Energies) i=
L3 w=
Energy

Emax = 79.0 Joule Barrel
F
EK = 85.0 Joule Z =
=
EE = 87.0 Joule

Grooves = mm²
b =
N =
u =
Q

Miscellaneous Dimensions
Fe =
delta L =

Notes: 1) Check for safety reasons
2) Valid only for Proof barrels

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

C.I.P. 18 x 81 TAB. X
Date 99-02-22
G2 Country of Origin: CZ Revision 00-06-07

H2 CARTRIDGE MAXI CHAMBER MINI

G Lengths = 81.00 Lengths = 80.80
E1 L1 = 148.50 L1 =
R1 L2 = L2 =
L3 1) = 164.50 L3 1)
i L4 =
F H2 L5 =
L6
R1
Case Head Breech
Scale 1:2 R
Dimensions in << mm >> R = 2.00 R1 =
R2 =
Dimensions and Tolerances for Proof Barrels G1 R1 = 21.80 R3 = 21.95
see Appendix CR 1. L4 r =
R3 = =
L6
E = 6.24

E1 = 18.00

e min = 1.90

G = 39°30'55"

f = 0.80

P1 E = 45°
L3
Powder Chamber Powder Chamber

E = 6.24

P1 = 21.85 P1 1) = 21.95
P2 =
P2 =

E E Junction Cone Junction Cone
R e min D= D=
f S= S=

r1 min = r1 max =
r2 = r2 =

Collar = 19.10 Collar = 19.20
H1 = H1 =
H2 1) H2 1)

Projectile Commencement of Rifling
G1 =
G1 1) = 16.30 G 1)* = 1.85
17.95 D =
G2 = h=
82.85 s=
F= i 1) = 17°58'09"
w=
L3+G 1) =

E Pressures (Energies)
P1
G Method Transducer
L3
Pmax = 3550 bar Barrel
F 1)*
PK = 4083 bar Z = 18.00
=
PE = 4615 bar

M = 82.25

Grooves = 254.47 mm²
b =
N =
u =
Q

Other Indications
Fe =
delta L =

Notes: 1) Check for safety reasons
* Basic dimensions

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

C.I.P. 18,5 x 55 TAB. X
Date 09-05-05
H2 Revision
Country of Origin: RU
E1
R1 CARTRIDGE MAXI CHAMBER MINI
H2
Lengths = 55.00 Lengths = 55.00 +0.46
R1 L1 = L1 =
L2 = L2 =
Scale 1.15:1 L3 1) = L3 2)
Dimensions in << mm >> L4 =
L5 =
Dimensions and Tolerances for Proof Barrels L6
see Appendix .
P1 Case Head 1.50 Breech = 18.50
L3 R= 18.50 R =
R1 = R1 =
R3 = 5.75 R2 =
E= 15.00 R3 =
r
E1 = 2.50
EG e min = 45°
R G=
f=
E=

Powder Chamber Powder Chamber
E=
e min P1 1) = 18.50 P1 = 18.50
P2 = 18.50 P2 =

Junction Cone Junction Cone
D= D=
S= S=

r1 min = r1 max =

r2 = r2 =

Collar = Collar = 18.50 +0.21
H1 = H1 =
H2 1) H2 2)

P1 Projectile Commencement of Rifling
L3 G1 = G1 =
G2 = G=
F= D =
L3+G = h=
s=
Pressures (Energies) i=
w=
Energy

Emax = 93.0 Joule Barrel
F
EK = 100.0 Joule Z =
=
EE = 102.0 Joule

Grooves = mm²
b =
N =
u =
Q

Miscellaneous Dimensions
Fe =
delta L =

Notes: 1) Check for safety reasons
2) Valid only for Proof barrels

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

C.I.P. 20 mm x 67,5 (6,3/14) TAB. X
Date 00-03-13
Country of Origin: DE Revision 02-05-15

CARTRIDGE MAXI CHAMBER MINI

Lengths = 67.50 Lengths = 74.90
L1 = L1 =
L2 = L2 =
L3 1) = -2.50 L3 1)
L4 =
L5 = 65.00 -2.50
L6 1)

Case Head Breech
H2 R 1) = 2.80 -0.20 R 1) = 2.40 +0.10

R1 1) = 22.45 -0.20 R1 1) = 22.55 +0.10

R3 = R2 =

E= R3 =

E1 = r=

R e min =
P1
L6 G=
L3
f=

E=

Powder Chamber Powder Chamber

E=

R1 P1 1) = 20.60 -0.10 P1 1) = 20.65 +0.10

P2 = P2 =

Junction Cone Junction Cone
D= D=
S= S=

r1 min = r1 max =
r2 = r2 =

Collar = 20.20 Collar = 20.35 +0.10
H1 = H1 =
H2 1) -0.25 H2 1)

F H2 Projectile Commencement of Rifling
G1 = G1 =
R1 G2 = G=
Scale 1:1.5 F= D = 180°
L3+G = h=
Dimensions in << mm >> s=
Dimensions and Tolerances for Proof Barrels Pressures (Energies) i=
w=
see Appendix CR 1. Method Transducer

R Pmax = 4300 bar Barrel
P1 F 1)*
L3 PK = 4945 bar Z = 12.00 +0.10
=
PE = 5590 bar

M = 25.00

Grooves = mm²
b =
N =
u =
Q

Other Indications
Fe =
delta L =

Notes: 1) Check for safety reasons
* Basic dimensions

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

C.I.P. MR 35 Punch cal. 12-28,5 TAB. X
Date 96-03-19
Country of Origin: CZ Revision 98-06-09

CARTRIDGE MAXIMALE

Dimens. Value Toler.

d 1) = 20.60 - 0.15
g = 22.45 - 0.25
t 1) = 1.88 - 0.25
h = 20.20 - 0.25
l = 25.00 - 2.50

CHAMBER MINIMALE

Dimens. Value Toler.

D1) = H = 20.20 H9
G1) = 23.07
T1) = 1.85 + 0.10
D11) = 35.00 H11
B1) = 44.20 + 0.70
D1)
D11) = D2 = 55°
L1)
L11) = 120°
L21) = 25.00 ± 0.10
= 31.00 ± 0.10
= 60.20 - 0.10

Energy

Emax EK EE
Joule

150 160 165

Scale 1:1 Notes : 1) Check for safety reasons

Dimensions in « mm »
Dimensions and tolerances for Proof Barrels:

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

C.I.P. MR 35 Punch cal. 12-35 TAB. X
Date 96-02-21
Country of Origin: FR Revision 98-06-09

CARTRIDGE MAXIMALE

Dimens. Value Toler.

d 1) = 20.60 - 0.28
g = 22.45 - 0.48
t 1) = 1.85 - 0.35
h = 20.20 - 0.47
l = 25.00 - 2.50

CHAMBER MINIMALE

Dimens. Value Toler.

D11) = 20.60
L11) = 27.00
G mini 1) = 25.80
T mini1) = 1.70
B1) = 33°10’42’’
D2 mini 1) = 35.00

L2 1) = 60.05 - 0.30
V 1) = 0.95 - 0.70
H 1) =
F mini1) = 36.00
D11)
= 60°

Energy

Emax EK EE
Joule

115 125 130

Scale 1:1 Notes : 1) Check for Safety reasons

Dimensions in « mm »
Dimensions and tolerances for Proof Barrels:

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

C.I.P. MR 35 Punch cal. 15-35 TAB. X
Date 96-02-21
Country of Origin: FR Revision 98-06-09

CARTRIDGE MAXIMALE

Ammunition ejectable:

reloaded from producer and therefore don’t use
any case.

CHAMBER MINIMALE

Dimens. Value Toler.

D11) = 15.00
L11) = 19.00
G 1) = 8.00

T = 0.95 +0.10

D3 = 5.85 +0.10

L3 = 6.50
D2 mini 1) = 35.00

L2 1) = 60.05 - 0.30
V 1) = 0.95 - 0.70
H 1) =
F mini1) = 36.00
D11)
= 60°

Energy

Emax EK EE
Joule

115 125 130

Scale 1:1 Notes : 1) Check for safety reasons

Dimensions in « mm »
Dimensions and tolerances for Proof Barrels

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

C.I.P. 380 Alfa TAB. X
Date 01-05-17
H2 Country of Origin: CZ Revision 02-05-15
R1
CARTRIDGE MAXI CHAMBER MINI

Lengths = 19.40 Lengths = 19.50
L1 = 19.50 L1 =
L2 * = L2 =
L3 1) = 22.50 L3 1)
L4 =
L5 =
L6

Case Head 1.25 Breech = 1.35
R= 11.00 R 1) = 11.05
R1 = R1 =
P1 R3 = 0.38 R2 =
L3 E= 45° R3 =
L6 E1 = r
e min =
G=
f=
E=

E Powder Chamber Powder Chamber

R E=
f

P1 = 9.58 P1 1) = 9.60
P2 = 9.57
P2 =

Junction Cone Junction Cone
D= D=
S= S=

r1 min = r1 max =
r2 = r2 =

Collar = Collar = 9.60
H1 = H1 =
H2 1) H2 1)

R G1 Projectile Commencement of Rifling
P1 h G1 = G1 * = 8.00
L3F H2 G2 = G=
F= D = 90°
L3+G = h * = 0.80
s=
D Pressures (Energies) i=
w=
Method Transducer

Pmax = 300 bar Barrel
F 1)*
PK = 345 bar Z 1) = 8.00
= 8.00
PE = 390 bar

M = 10.50

R1 Grooves =
b =
N = 50.27 mm²
u =
Q

Other Indications
Fe =
delta L =

Scale 1.5:1 Notes: 1) Check for safety reasons
* Basic dimensions
Dimensions in << mm >>
Dimensions and Tolerances for Proof Barrels

see Appendix CR 1.

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

C.I.P. 380 ME Gum TAB. X
Date 99-08-04
H2 Country of Origin: IT Revision 02-05-15
R1
CARTRIDGE MAXI CHAMBER MINI

Lengths = 22.00 Lengths = 23.00
L1 = 22.00 L1 =
L2 = L2 =
L3 = 22.50 L3 1)
L4 =
L5 =
L6

Case Head 1.20 Breech = 1.30
R 1) = 11.00 -0.10 R 1) = 11.10
R1 = =
P1 R3 = R1 =
L3 E= R2 =
L6 E1 = R3
e min = r
G=
f= 0.40
E= 45°

Powder Chamber Powder Chamber

E P1 = 9.50 E=
P2 =
R P1 1) = 9.55
f

P2 =

Junction Cone Junction Cone
D= D=
S= S=

r1 min = r1 max =
r2 = r2 =

Collar = 9.50 Collar = 9.55
H1 = H1 =
H2 1) H2 1)

Projectile Commencement of Rifling
G1 =
R G1 G2 = G1 1)* = 7.51
P1 h F=
L3 L3+G = G=

F H2 D = 90°

h * = 1.02

s=

D Pressures (Energies) i=

Method Transducer w=

Pmax = 300 bar Barrel
F 1)*
PK = 345 bar Z = 7.50
=
PE = 390 bar

M = 10.50

R1 Grooves = 44.18 mm²
b =
Scale 1.5:1 N =
Dimensions in << mm >> u =
Q
Dimensions and Tolerances for Proof Barrels
see Appendix CR 1. Other Indications
Fe =
delta L =

Notes: 1) Check for safety reasons
* Basic dimensions

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

C.I.P. 40 x 46 TAB. X
Date 07- 05 - 14
Country of Origin : US Revision 08- 04 - 15

CARTRIDGE MAXIMALE

Culot Maxi Mini (1)
Bourrelet dia. d = 41.15 mm 40.90 mm (1)
Bourrelet dia. g = 43.61 mm 43.35 mm
ép. t = 1.93 mm 1.77 mm
Tube
dia. h = 40.51 mm 40.26 mm

Length : = 110 mm Tolerance : -0.50 mm
L max

CHAMBER MINIMALE

Culot dia. D mini = 41.50 + 0.1 mm (1)
Drageoir dia. G mini = 44.20 + 0.2 mm (1)
Drageoir pro. T mini = 1.90 ± 0.05 mm (1)
Chamber dia. H mini = 41.30 ± 0.05 mm (1)
Barrel dia. B mini = 40.86 + 0.05 mm (1)
Barrel angle Į1 mini = 10°
(1)
Length :
(1)
l max = 49.10 mm Tolerance : +0.50 mm (1)
E max = 160 Joules (1)
EK
EE = 176 Joules
Headspace = 0.10 mm (Proof barrel)
= 0.20 mm (with bascule)
= 0.35 mm (automatic)

Dimensions in « mm » Notes : 1) Check for safety reasons
Dimensions and tolerances for Proof Barrels :

Annexe CR4

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.



C.I.P. 44/83 TAB. X
Date 94-03-01
Country of Origin: FR Revision 94-06-01

CARTRIDGE MAXIMALE

Dimens. Value Toler.
d 1) = 47.55 - 0.10
g = 51.50 - 0.15
t 1) = 2.05 - 0.10
h = 47.05 - 0.10
l = 83.50 - 0.50

CHAMBER MINIMALE Energy
Emax EK EE
Dimens. Value Toler.
D1) = 48.00 + 0.30 Joule
G = 51.50 + 0.50
T1) = 2.10 + 0.05
H1) = 47.80 + 0.30
B1) = 44.20 + 0.20
D11) = 22°04’ max
L1) = 83.50 + 0.50

Headspace Proof Barrel
Fe = 0.10 with bascule
Fe1) = 0.20 automatic
Fe1) = 0.35

Scale 1:2 Notes : 1) Check for safety reasons

Dimensions in « mm »
Dimensions and tolerances for Proof Barrels :

See Appendix CR 4.

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

C.I.P. 44/83 SP TAB. X
Date 00-03-02
Country of Origin: FR Revision 02-05-15

CARTRIDGE MAXIMALE

Dimens. Value Toler.
d 1) = 47.60 - 0.25
g = 51.35 - 0.45
t 1) = 2.10 - 0.40
h = 47.60 - 0.45
l = 83.50 - 2.50

CHAMBER MINIMALE Energy EE
Emax EK 330
Dimens. Value Toler.
D1) = 47.70 + 0.10 Joule
G = 51.40 + 0.10 300 321
T1) = 2.25 + 0.10
H1) = 47.70 + 0.10
B1) = 44.20 + 0.70
D11) = 30° max
L1) = 83.50 + 2.00

Headspace Proof Barrel
Fe = 0.10 with bascule
Fe1) = 0.20 automatic
Fe1) = 0.35

Scale 1:2 Notes : 1) Check for safety reasons

Dimensions in « mm »
Dimensions and tolerances for Proof Barrels:

See Appendix CR 4.

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.





C.I.P. 56 Cougar TAB. X
Date 07- 05 - 14
Country of Origin : FR Revision

CARTRIDGE MAXIMALE

Dimension Value Tolerance
g 60 -0,1
d* 56,3 -0,3
t* 3,5 -0,1
l -1,0
210,5
h -1,0
55,5

CHAMBER MINIMALE

Dimension Value Tolerance
G* 60 +0,2
D* 56,8 +0,1
T* 3,6 +0,05
L* 291 +2,0

H* 56,7 +0,1

Energie (Joules) E nominale E max (+10%)
475 500

Headspace Fe = 0,15 max (manomètre à bascule automatique)

Dimensions in « mm » Notes : 1) Check for safety reasons
Dimensions and tolerances for Proof Barrels :

Annexe CR4

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

ПРИЛОЖЕНИЕ Е21

Таблица XI (первая часть)

734

TABLE XI

C.I.P. Caseless cartridges DATE 94-06-01

REV. 96-06-06

Calibres of weapons for caseless cartridges.

The metric calibres are classed before the calibres originally designated in inches.
The classification is in growing and in alphabetical order according to the designation of the calibre.

Transducer method

________________________________________________________________________________________

Calibre Country of origin Date Rev. M PTmax PK PE

________________________________________________________________________________________

5,7 mm UCC Voere AT 94-05-25 96-06-06 15,5 4100 4715 5330

__________________________________________________________________________________________________

PTmax = maximum average pressure (bar)
PK = 1,15 Pmax = maximum statistical individual pressure (bar)
PE = 1,30 Pmax = mean proof pressure (bar)
M = location of the pressure take (mm)
Notice: For conformal or tangential transducers the location (M) is that defined by the manufacturer.
__________________________________________________________________________________________________

2011 Reproduction forbidden as well as in the form of extracts without approval of C.I.P. 1

ПРИЛОЖЕНИЕ Е22

Таблица XI (вторая часть)

736

C.I.P. 5,7 mm UCC Voere TAB. XI
Date 94-05-25
Country of Origin: AT Revision 96-06-06

CARTRIDGE MAXI CHAMBER MINI

Lengths Lengths

L1 = L1 =

L2 = L2 =

P1 G1 L3 1) = 26.10 L3 1) = 25.75
L3
L6 L4 =

L5 =
H2 L6 = 38.00

Case Head 2.60 Breech = 2.10
R= 9.00 R = 9.00
R1 = R1 =
R3 = 7.55 R2 =
E= 3.40 R3 =
E1 = r
e min = 0.50
G= 45°
f=
E=

Powder Chamber Powder Chamber

E1 E =
E P1 = 9.00 P1 1) = 10.95
R1 e min
R P2 = P2 =
Rf
Junction Cone Junction Cone 180°
D= D 1) =
S= S= 1.00
0.40
r1 min = r1 max =
r2 = r2 =

i Collar Collar

H1 = H1 =

G1 h H2 1) = 9.00 H2 1) = 8.95
G

F Projectile Commencement of Rifling
H2
G1 1) = 5.70 G1 1)* = 5.69
27.57
G2 = G 1)* = 1.47

D F= D = 90°

L3+G 1) = h * = 0.30

s=

Pressures (Energies) i 1) = 3°10'47"

Method Transducer w=

P1 Pmax = 4100 bar Barrel
L3 F 1)*
PK = 4715 bar Z 1) = 5.56
= 5.69
PE = 5330 bar

M = 15.50

R1 Grooves = 1.88 mm²
b = 6
Scale 2:1 N =
Dimensions in << mm >> u = 305.00
Q 25.03
Dimensions and Tolerances for Proof Barrels
see Appendix CR 1. Miscellaneous Dimensions
Fe =
delta L =

Notes: 1) Check for safety reasons
* Basic dimensions

Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

ПРИЛОЖЕНИЕ Ж1

Перечень контрольных калибров для контроля размеров патронников

738

Reference gauges ANNEXE I
Chamber
C.I.P. DATE 84-06-14

REV. 00-06-06

List of reference gauges for the dimensions to test
from the point of view of safety

CHAMBER

TAB. I - BR/1 - Form (P1, L3, H2)
TAB. I - BR/2 - Length (L3) at diameter (H2) mini and headspace maxi
TAB. I - BR/3 - Junction cone (L1/P2, L2/H1) and headspace maxi
TAB. I - BR/4 - Commencement of rifling (G1, s, G, L3+G)
TAB. I - BR/5 - Junction cone headspace SAAMI
TAB. I - BR/6 - Length (L3) headspace SAAMI
TAB. I - BR/7 - Grooves (F, Z)

TAB. II - BR/2 - Breech depth and headspace (R) mini and maxi

TAB. III - BR/2 - Breech depth and headspace (E) mini and maxi

TAB. V - B/7 - Headspace (Fe) maxi
TAB. V - B/8 - Breech depth (R) mini

TAB. VI - BR/7 - Breech depth (R) mini
TAB. VI - B/1 - Diameter at chamber mouth (P1) mini (8 Gauge)
TAB. VI - B/2 - Diameter H2 and length mini (8 Gauge)

TAB. VI - B/4 - Junction cone (D1) maxi (8Gauge)
TAB. VI - B/5 - Breech depth (R) mini (8 Gauge)
TAB. VI - B/7 - Breech depth (R) mini, ENTER, (8 Gauge)
TAB. VI - B/8 - Headspace (a) maxi (8 Gauge)

TAB. VII - BR/1 - Diameter (D) at the chamber
TAB. VII - BR/2 - Diameter before (H) and length (L) mini
TAB. VII - BR/3 - Diameter before (H) and length (L) maxi

TAB. VII - BR/4 - Junction cone (D1)
TAB. VII - AB/7 - Breech depth (T) page 01 and 02
TAB. VII - AB/8 - Headspace (a) maxi

2003 Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

739

ПРИЛОЖЕНИЕ Ж2

Чертежи контрольных калибров для контроля размеров патронников

740

C.I.P. Testing of safety TAB. I BR/1
Rifled weapons DATE 83-02-03
REV. 90-06-13
Reference gauge
Chamber mini

Testing of dimensions P1, L3 and H2
GO

rimless (P1) P1 P1 P2 x2
L1 E

rimmed (P1) P1 P1 P2 x2
L1 R

Magnum (P1) P1 P1 P2 x2
L1 E

Tolerances = ISO 286-2: 1986 (F)

2003 Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

741

C.I.P. Testing of safety TAB. I BR/2
Rifled weapons DATE 83-02-03
REV. 90-06-13

Reference gauge
Chamber for rimless cartridges without cone
Testing of minimal length L3 and diameter H2

GO
Testing of maximal headspace

NO GO

L min = L3
L max = L min + headspace

Tolerances = ISO 286-2: 1986 (F)

2003 Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

742

C.I.P. Testing of safety TAB. I BR/3
Rifled weapons DATE 83-02-03
REV. 90-06-13
Reference gauge
Junction cone

Testing of L1/P2 and L2/H1
GO

Testing of maximal headspace
NO GO

L min = L (calculated)

L max = L min + headspace

(P1) P1 P1 P2 x2 D P2 H1
L1 E 2

(P2) P2 2r1(1 cos D ) L L1 L2
2 2

(L1) L1 r1 tan g D
4

D 2 arctan g D tan g D P2 H1
2 2 2(L2 L1)

Note: The nominal value of D may vary between the values P2 and H1, what is followed by the
change of length L, rounded in the third digit after the decimal point.

Tolerances = ISO 286-2: 1986 (F)

2003 Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

743

C.I.P. Testing of safety TAB. I BR/4
Rifled weapons DATE 83-02-03
REV. 90-06-13
Reference gauge
Commencement of rifling
Testing of G1, s, G and L3+G

GO

D G1 F L (L3 s) G s or (L3 h) G h
2 2 2

rimless (P1) P1 P1 P2 x2
rimmed L1 E
Magnum
(P1) P1 P1 P2 x2
L1 R

(P1) P1 P1 P2 x2
L1 E

Note: The nominal value of D may vary between the values P2 and H1, what is followed by the
change of length L, rounded in the third digit after the decimal point.

Tolerances = ISO 286-2: 1986 (F)

2003 Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

744

C.I.P. Testing of safety TAB. I BR/5
Rifled weapons DATE 83-02-04
REV. 90-06-13
Origin U.S.

Reference gauge
Chamber for conical ammunition

Testing of minimal and maximal headspace

(L1) = L1 – 2,5 „MINI“
GO

Į = exact

„MAXI“
NO GO

(P2) P2 2r1(1 cos D )
2

(L1) L1 r1 tan g D
4

Note: The headspace of weapons of American origin may be tested with a
gauge of SAAMI design.
For the test of value “MAXI” the tolerances of C.I.P. are to be used.

Tolerances = ISO 286-2: 1986 (F)

2003 Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

745

C.I.P. Testing of safety TAB. I BR/6
Rifled weapons DATE 83-02-03
REV. 94-10-25
Origin U.S.

Reference gauge
Chamber for rimless cartridges without cone

Testing of minimal and maximal headspace

„MINI“
GO

(P1) = (reference dimension)

(P1) P1 P1 H2 (5,08 R) or (P1) P1 P1 H2 (5,08 E)
L3 R L3 E

„MAXI“
NO GO

L min = L3
L max = L min + headspace

Note: The headspace of weapons of American origin may be tested with a
gauge of SAAMI design.
For the test of value „MAXI“ the tolerances of C.I.P. are to be used.

Tolerances = ISO 286-2: 1986 (F)

2003 Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

746

C.I.P. Testing of safety TAB. I BR/7
Rifled weapons DATE 83-02-03
REV. 94-10-18
Reference gauge
Grooves

Testing of F and Z
GO

a = 0,7 x b For grooves in odd number

LF • 2,5 x F ” 20 mm

Lz u
50

c ” 0,6 F

Note: The gauges are not to be used in case they equal the reference value.

Tolerances = ISO 286-2: 1986 (F)

2003 Reproduction forbidden as well as in the form of extracts without approval of C.I.P.

747