AIR CONDITIONING AND REFRIGERATION
Flooded Suction...................................................6,7, 9,10, 83-89
Self-Priming...........................................................8, 10, 80, 81
Refrigeration...................................................................... 10
Ampco.......................................................................... 7, 83
Cal................................................................................... 9
Little Giant......................................................................... 6
March.................................................................... 6, 9,10, 89
MP............................................................................... 8, 81
Oberdorfer.............................................................. 7,8, 80, 84
Price............................................................................ 7, 85
Primetime......................................................................8, 80
Proven.............................................................................. 9
Scot................................................................................. 9
AMPCO GALLEY JOHNSON PRICE TECMA WILO
AMT MAID LITTLE GIANT PRIMETIME TUTHILL WHALE
BARNES MARCH RARITAN ULTRA SAFETY YAMADA
BOSWORTH GENERAL MARCO REVERSO WALBRO
BURKS GIANNESCHI MP PUMPS RULE WANNER
CALPEDA GIANT MTH SCOT WEINMAN
CAT GOULDS WATER OBERDORFER SHERWOOD
CRANE DEMING PACER SHURFLO
DANFOSS TECHNOLOGY PEDROLLO
EDSON GROCO PERKO
FILL-RITE GRUNDFOS
FINISH HAIGHT
HYDRACELL
THOMPSON IWAKI
FLOJET JABSCO
FLOTEC
AMERICA’S MARINE PUMP SPECIALISTS
FOR OVER 50 YEARS!
The largest In-stock Selection of Marine
Pumps and Parts Anywhere!
Yachtyards, Shipyards, Marinas,
Mobile Marines and Marine Equipment
Dealers from across the U.S. depend
on Depco to help them satisfy their
customer’s needs!
WE HAVE
WHAT YOU
NEED WHEN
YOU NEED IT!
RAPID REPAIR AND With over $10,000,000 worth of inventory on the shelf, our
CUSTOM ASSEMBLY! goal is to have what you need before you call!
Our pump technicians will repair, Specialtists
repower or trouble shoot your
pump, providing what you need
when you need it!
Pump Manufacturers • 16 Pump
Inventory • 65
PRODUCT
$10 Million 16 PUMP INFORMATION
SPECIALISTS AT YOUR
READY TO HELP! FINGERTIPS!
There’s no automated attendant at Need performance specs on a pump? Or, maybe a
Depco! When you call a real person will service parts breakdown? Check out our website library
answer and quickly connect you to one at www.depcopump.com or give us a call.
of our experienced pump specialists!
PUMP BRANDS BY TYPE
A/C & Refrigeration 727-446-1656 • 1-800-446-1656 • www.depcopump.com
Bilge & Shower
Engine Cooling
Fire Pumps
Fuel Transfer
Oil Change
Reverse Osmosis
Strainers
Toilets
Washdown & Livewell
Water Systems
Page 4 • Catalog 112
CONTENTS
AIR CONDITIONING AND REFRIGERATION......... 2-14,100,104-111
Self-priming and flooded suction replacement pumps for all manufacturers including Marine
Air, Cruisair, Grunert, Aqua-Air, Mermaid, etc. or your unique custom systems
WATER SYSTEMS.............................................15-26,94,95
Large AC to miniature DC water systems, accumulator tanks, pressure regulators, fittings,
hoses and clamps
WASHDOWN AND LIVEWELL......................... 27-36,48,100-112
High flow/low pressure and high pressure/low flow washdown and livewell pumps in AC, DC,
clutch and hydraulic drive
BILGE AND SHOWER SUMP...................37-48,88,89,100-103,111
Automatic and manually operated submersible and self-priming pumps for bilge and shower
sumps in DC, AC, belt, clutch and pneumatic operation section also includes float and level
switches
OIL CHANGE AND FUEL TRANSFER............... 49-60,93,96-99,111
Reversible and uni-directional oil change and fuel transfer pumps in AC, DC, pneumatic, and
manual operation
MACERATORS AND TOILETS......................61-70,86-88,178-180
Electric and manually operated macerator/solids handling pumps and toilets, service parts
for Jabsco, Groco and Galley Maid toilet systems
ACCESSORIES......................................................... 71-82
Search lights, AC and DC blowers, bronze and plastic strainers, bronze and plastic thru-hulls,
bronze seacocks, bronze and plastic fittings, bilge, water systems and sewage hoses
MEGA YACHT AND SHIP............................................83-112
Large and custom configured pumps to meet the unique requirements and stringent regulations
often required on larger vessels including MCA, Lloyds, ABS, USCG and international motor
voltage requirements
ENGINE COOLING AND PARTS BREAKDOWNS................ 113-182
Extensive engine pump cross-references and parts breakdowns, discontinued and restricted
pump repair information and parts listings for toilets, utility pumps and strainers
IMPELLER CHARTS................................................ 183-190
Impeller silhouette charts for Jabsco, Johnson, Sherwood and Oberdorfer
INDEXES (Pump Brand, Engine Brand And Model Number).......... 191-192
Quick reference by description, pump brand, engine/generator brand, or by specific pump
model number for Jabsco, Oberdorfer, Sherwood or Johnson Pumps
www.depcopump.com • 1-800-446-1656 • 727-446-1656
Catalog 112 • Page 1
OEM TO PUMP MODEL CROSS-REFERENCE
Brand.........Mfg. Number....Pump Brand... Model Number.......... Page Brand.........Mfg. Number....Pump Brand... Model Number..................................Page
Adler-Barbour.D8150..............March............. LC-2CP-MD........................ 4 Marine Air..... P400.................March............. LC-2CP-MD.................................................. 4
Adler-Barbour.D8152..............March............. LC-3CP-MD........................ 4 Marine Air..... P500.................March............. LC-3CP-MD.................................................. 4
Adler-Barbour.E1390..............March............. 893-04............................12 Marine Air..... P510.................Little Giant...... 3-MD-SC...................................................... 9
Aqua-Air....... AQPM-02............March............. LC-2CP-MD........................ 4 Marine Air..... P700.................Scot............... 67 - 3.44" 48 frame or 68 - 3.44" 56 Frame...........7
Aqua-Air....... AQPM-05............March............. LC-3CP-MD........................ 4 Marine Air..... P700 - 380/3PH...Scot............... 72 - 3.75" 380V - 50Hz (47372).......................... 7
Aqua-Air....... AQPM-10............March............. AC-5C-MD.......................... 4 Marine Air..... P700 - 460/3PH...Scot............... 72 - 3.5" 460V (47372).................................... 7
Aqua-Air....... AQPM-15............Oberdorfer...... 104M-F13.......................... 6 Marine Air..... P700Z...............Scot............... 67 - 3.44" 48 Frame........................................ 7
Aqua-Air....... AQPM-30............Oberdorfer...... 109MB-J19........................ 6 Marine Air..... P700Z - 3PH........Scot............... 72 - 3.5" 230V (47372).................................... 7
Aqua-Air....... XT100B-XX-XXX....Price.............. XT100B 1 1/2" x 1" Series....... 8 Marine Air..... P710.................Scot............... 78 - 3.5" 48 Frame or 78 - 3.5" 56 frame (48378)....7
Aqua-Air....... XT150B-XX-XXX....Price.............. XT150B 2" x 1 1/2" Series ...... 8 Marine Air..... P710Z...............Scot............... 78 - 3.5" 48 Frame or 78 - 3.5" 56 frame (48378)....7
Aqua-Air....... XT200B-XX-XXX....Price.............. XT200B 3" x 2" Series ........... 8 Marine Air..... P711.................Scot............... 78 - 4.0" (48378)........................................... 7
Cruisair........ P1200BXT-SP.......Oberdorfer...... 300B-10F36BJ-50/60-316......11 Marine Air..... P711 3PH...........Scot............... 78 - 4.75" 380V - 50Hz (48378).......................... 7
Cruisair........ P1500BXT..........Oberdorfer...... 104M-10F36BJ-50/60-316...... 6 Marine Air..... P711Z...............Scot............... 78 - 4.0" (48378)........................................... 7
Cruisair........ P3000BXT..........Oberdorfer...... 109MB-10J36BJ-50/60-316....11 Marine Air..... P715CW - 4"........Scot............... 17 - 4.0" 230V 3PH (57017)..............................14
Cruisair........ PDS250..............Cal................ MS 320............................10 Marine Air..... P715CW - 4.5".....Scot............... 17 - 4.5" 230/460V (57017).............................14
Cruisair........ PDS500..............Cal................ MS 580B...........................10 Marine Air..... P715CW - 4.75"....Scot............... 121 - 4.75" 380V - 50Hz (57121).................... 8, 14
Cruisair........ PDS900..............Cal................ MS 900B...........................10 Marine Air..... P715CW - 4.75"....Scot............... 17 - 4.75" 380V - 50Hz (57017).........................14
Cruisair........ PH3000BX..........Oberdorfer...... 109MB-J19........................ 6 Marine Air..... P715CW - 5.13"....Scot............... 206 - 5.13" 380V -50Hz (57206).........................14
Cruisair........ PM1000.............March............. AC-5C-MD.......................... 4 Marine Air..... P800.................March............. 893-04-1/2.................................................12
Cruisair........ PM1500BX..........Oberdorfer...... 104M-F13.......................... 6 Marine Air..... P900.................March............. 809BRC-HS-12.............................................12
Cruisair........ PM250...............March............. LC-2CP-MD........................ 4 Marine Air..... PC400...............Cal................ MS 320B.....................................................10
Cruisair........ PM500...............March............. LC-3CP-MD........................ 4 Marine Air..... PC500...............Cal................ MS 580B.....................................................10
Cruisair........ PS1500BX...........Scot............... 67 - 2.5" 48 Frame............... 7 Marine Air..... PDA250.............Cal................ MS 320B.....................................................10
Cruisair........ PS1800BX...........Scot............... 67 - 3.00" 48 Frame.............. 7 Marine Air..... PDA500.............Cal................ MS 580B.....................................................10
Cruisair........ PS2200BX...........Scot............... 67 - 3.44" 48 Frame.............. 7 Marine Air..... PH3000BX-SP......Scot............... 77 - 3/4HP (48377 - with strainer basket)...........11
Grunert........ P500.................March............. LC-3CP-MD........................ 4 Marine Air..... PMA1000............March............. AC-5C-MD.................................................... 4
Grunert........ P800.................March............. 893-04-1/2.......................12 Marine Air..... PMA1000C..........March............. AC-5C-MD 230V............................................. 4
Grunert........ P900.................March............. 809BRC-HS-12...................12 Marine Air..... PMA500.............Little Giant...... 3-MD-SC...................................................... 9
Lunair.......... WPC1000...........March............. AC-5C-MD.......................... 4 Marine Air..... PML1000 ..........March............. LC-5CP-MD.................................................. 4
Lunair.......... WPC250.............March............. LC-2CP-MD........................ 4 Marine Air..... PML1000C..........March............. LC-5CP-MD.................................................. 4
Lunair.......... WPC500.............March............. LC-3CP-MD........................ 4 Marine Air..... PML250.............March............. LC-2CP-MD.................................................. 4
Marine Air..... 336005..............Scot............... 66 - 3.0"........................... 7 Marine Air..... PML250C............April.............. LC-2CP-MD 230V........................................... 4
Marine Air..... 1010017............Scot............... 65 - 2.87".......................... 7 Marine Air..... PML500.............March............. LC-3CP-MD.................................................. 4
Marine Air..... 1010018............Scot............... 65 - 3.12".......................... 7 Marine Air..... PML500CK..........March............. LC-3CP-MD 230V........................................... 4
Marine Air..... 1010019............Scot............... 65 - 3.31".......................... 7 Marine Air..... PML500CL..........March............. LC-3CP-MD 230V........................................... 4
Marine Air..... P100.................Scot............... 67 - 2.5" 48 Frame............... 7 Technicold.... TE-1000.............March............. AC-5C-MD.................................................... 4
Marine Air..... P100Z...............Scot............... 67 - 2.5" 48 Frame............... 7 Technicold.... TE-250..............March............. LC-2CP-MD.................................................. 4
Marine Air..... P110Z - 3PH........Scot............... 72 - 2.75" 230V (47372)......... 7 Technicold.... TE-27................March............. 893-04......................................................12
Marine Air..... P120.................Scot............... 67 - 3.00" 48 Frame.............. 7 Technicold.... TE-500..............March............. LC-3CP-MD.................................................. 4
Marine Air..... P300 ................March............. AC-5C-MD.......................... 4
Marine Air..... P310.................Little Giant...... 5-MD-SC............................ 9 Crusair, Marine Air, Grunert and Adler-Barbour are registered trademarks of the Dometic Group Marine
Division | Aqua Air Marine Air Conditioning Systems is a registered trademark of the James D. Nall
Company Inc. | Dayton is a registered trademark of Dayton Electric Mfg Co. | Sea Recovery is a registered
trademark of Parker-Hannifan Corp.
727-446-1656 • 1-800-446-1656 • www.depcopump.com
Page 2 • Catalog 112
AIR CONDITIONING AND REFRIGERATION
Flooded Suction...................................................... 4-10,104-110
Self-Priming.......................................................... 11,13,100-103
Refrigeration. ................................................................. 12,13
Chilled Water..................................................................... 14
Ampco......................................................................... 8,108
Bell & Gossett.................................................................... 14
Cal.................................................................................. 10
Calpeda............................................................................ 10
Finish Thompson.............................................................. 9,110
Flojet.............................................................................. 13
Gianneschi........................................................... 10,14,101,111
Grundfos.......................................................................... 14
Iwaki................................................................................ 9
Jabsco ............................................................................ 13
Johnson Pump.................................................................... 13
Little Giant......................................................................... 9
March........................................................................4,5,9,12
MP Pump...............................................................6,11,101,107
Oberdorfer........................................................6,11,100,103-105
Price................................................................... 8,14,106,110
Primetime.................................................................11,32,100
Scot......................................................................... 7,8,11,14
Sherwood......................................................................... 10
Shurflo............................................................................. 13
Wilo................................................................................ 14
www.depcopump.com • 1-800-446-1656 • 727-446-1656
Catalog 112 • Page 3
MARCH MAG-DRIVE AIR CONDITIONING PUMPS
MARCH UP TO 250 GPH, UP TO 6,000 BTU, EPOXY ENCAPSULATED MOTOR
LC-2CP-MD P400, PM250, PML250, WPC250, TE-250, D8150, AQPM-02
MARCH The March model LC-2CP-MD is standard equipment on a majority of smaller systems up to
6,000 BTU. The magnetic drive design eliminates the conventional seal found in most pumps,
LC-3CP-MD reducing the chance of leaks. The epoxy encapsulated motor allows the pump to be fully
submerged. Available in 115 or 230 vac 50/60 hz. Pump head (wet end) kits are available and
MARCH easy to replace with only a screwdriver. See page 170 for a complete parts list and breakdown.
LC-5C-MD Model Additional Volts Hz Port Size GPH at Feet of Head Max
Number Description AC FPT/MPT x MPT 3' 5' 12' Head
MARCH
LC-2CP-MD 115V Marine Air PML250 115 50/60 ⅜" x ¼" 260 210 45 13'
AC-5C-MD 13'
LC-2CP-MD 230V Marine Air# PML250C 230 50/60 ⅜" / ¾" x ¼" 260 210 45
Reduced flow will be experienced at 50 hz operation.
UP TO 500 GPH, UP TO 24,000 BTU, EPOXY ENCAPSULATED MOTOR
P500, PM500, PML500, WPC500, TE-500, D8152, AQPM-05
The March model LC-3CP-MD is standard equipment on the majority of systems between
6,000 – 24,000 BTU. The magnetic drive design eliminates the conventional seal found
in most pumps, reducing the chance of leaks. The epoxy encapsulated motor allows the
pump to be fully submerged. Available in 115 or 230 vac 50/60 hz. Pump head (wet end)
kits are available and easy to replace with only a screwdriver. See page 170 for a complete
parts list and breakdown.
Model Additional Volts Hz Port Size GPH at Feet of Head Max
Number Description AC FPT x MPT 3' 5' 12' Head
LC-3CP-MD 115V PM500, PML500 115 50/60 ¾" x ½" 500 480 325 19'
19'
LC-3CP-MD 230V PML500CL, PML500CK 230 50/60 ¾" x ½" 500 480 325
Reduced flow will be experienced at 50 hz operation.
UP TO 900 GPH, UP TO 48,000 BTU, EPOXY ENCAPSULATED MOTOR
PML1000, PML1000C
The March model LC-5C-MD can be found in single or multiple air conditioning systems from
24,000 – 48,000 BTU. The epoxy encapsulated motor allows the pump to be fully submerged.
Available in 115 or 230 vac 50/60 hz. Comes standard with a 6' cord. Pump head (wet end)
kits are available and easy to replace.
Model Additional Volts Hz HP Port Size GPH at Feet of Head Max
Number Description AC FPT x MPT 3' 6' 12' 24' Head
LC-5C-MD 115V PML1000 115 50/60 ⅛ 1" X ½" 900 840 715 340 27'
LC-5C-MD 230V PML1000C 230 50/60 ⅛ 1" X ½" 900 840 715 340 27'
Reduced flow will be experienced at 50 hz operation.
UP TO 1,000 GPH, UP TO 48,000 BTU, ODP MOTOR
P300, PM1000, PMA1000, WPC1000, TE-1000, AQPM-10
The March model AC-5C-MD can be found in single or multiple air conditioning systems from
24,000- 48,000 BTU. Available with an open motor in 115 or 230 vac 50/60 hz. The motor
features built-in overload protection. Comes standard with a 6' cord. Pump head (wet end)
kits are available and easy to replace. See page 170 for a complete parts list and breakdown.
Model Additional Volts Hz HP Port Size GPH at Feet of Head Max
Number Description AC FPT x MPT 3' 6' 12' 24' Head
AC-5C-MD 115V PMA1000 115 50/60 ⅛ 1" X ½" 978 900 750 390 27'
AC-5C-MD 230V PMA1000C 230 50/60 ⅛ 1" X ½" 978 900 750 390 27'
Reduced flow will be experienced at 50 hz operation.
727-446-1656 • 1-800-446-1656 • www.depcopump.com
Page 4 • Catalog 112
MARCH MAG-DRIVE AIR CONDITIONING PUMPS
UP TO 1,950 GPH, UP TO 72,000 BTU, ODP OR TEFC MOTORS MARCH
FOR LARGE MULTI-UNIT AND REMOTE SYSTEMS TE-5.5C-MD
March Pump’s TE-5.5C series magnetically driven centrifugal pumps incorporate March’s own MARCH
sealless technology, eliminating the possibility of seal failure. Delivering up to 1,950 gph,
the TE-5.5C will cool multiple air conditioning units. They are available in 115/230 vac single DP-6T-MD
phase or 230/460 vac three phase, 50/60 hz, and TEFC or ODP enclosure.
MARCH
Model Volts Hz HP Port Size GPH at Feet of Head Max
Number AC FPT x MPT 10' 25' 35' 40' Head TE-7R-MD
TE-5.5C-MD 115/230 50/60 1/3 1" x ¾" 1800 1410 940 510 41' MARCH
TE-5.5C-MD w/AC motor 115/230 50/60 1/5 1" x ¾" 1800 1410 940 510 41'
TE-8C-MD
Reduced flow will be experienced at 50 hz operation.
Shown with AC motor.
UP TO 2,100 GPH, UP TO 128,000 BTU, HIGH HEAD SERIES
FOR LARGE MULTI-UNIT AND REMOTE SYSTEMS
March Pump’s DP-6T-MD and TE-6T-MD magnetically driven centrifugal pump incorporate
March’s own sealless technology, eliminating the possibility of seal failure. Delivering up to
2,100 gph, the DP-6T-MD and TE-6T-MD will cool multiple air conditioning units and provide
enough extra head pressure to reach remote locations. The DP-6T-MD is supplied with an
ODP 115/230 vac 60 hz single phase motor. The TE-6T-MD offers 115/230 or 230/460 vac
three phase, 50/60 hz TEFC motor.
Model Volts Hz HP Port Size GPH at Feet of Head Max
Number AC FPT x MPT 10' 25' 35' 40' Head
DP-6T-MD 115/230 60 ½ 1" x ¾" 2100 1740 1440 1340 49'
TE-6T-MD 115/230 50/60 ½ 1" x ¾" 2100 1740 1440 1340 49'
TE-6T-MD 230/460 50/60 ½ 1" x ¾" 2100 1740 1440 1340 49'
Reduced flow will be experienced at 50 hz operation.
UP TO 3,300 GPH, UP TO 144,000 BTU
FOR LARGE MULTI-UNIT AND REMOTE SYSTEMS
March Pump’s TE-7 series magnetically driven centrifugal pump incorporate March’s own
sealless technology, eliminating the possibility of seal failure. Delivering up to 3,300 gph,
it will cool multiple air conditioning units and provide enough extra head pressure to reach
remote locations. Each pump is supplied with a 115/230 vac single phase or 230/460 vac
three phase, 50/60 TEFC motor and comes with a non-metallic (TE-7R) or 316 stainless steel
(TE-7S) body. A self-priming version is also available.
Model Volts Hz HP Port Size GPH at Feet of Head Max
Number AC FPT x MPT 10' 30' 50' 70' Head
TE-7R-MD 115/230 50/60 ¾ 1½" x 1" 3360 2400 1440 60'
TE-7R-MD 230/460 50/60 ¾ 1½" x 1" 3360 2400 1440 60'
TE-7S-MD 115/230 50/60 1 1½" x 1" 3360 2400 1440 60'
TE-7S-MD 230/460 50/60 1 1½" x 1" 3360 2400 1440 60'
Reduced flow will be experienced at 50 hz operation.
UP TO 7,200 GPH, UP TO 320,000 BTU
FOR LARGE MULTI-UNIT AND REMOTE SYSTEMS
March Pump’s TE-8 series magnetically driven centrifugal pump incorporate March’s own
sealless technology, eliminating the possibility of seal failure. Delivering up to 7,200 gph,
it will cool multiple large air conditioning units and provide enough extra head pressure to
reach remote locations and impressive heights. Each pump is supplied with a 230/460 vac
three phase, 50/60 hz TEFC motor.
Model Volts Hz HP Port Size GPH at Feet of Head Max
Number AC FPT x MPT 10' 30' 50' 70' Head
TE-8C-MD 230/460 50/60 3 2" x 1½" 7260 7200 6900 4800 95'
TE-8S-MD 230/460 50/60 5 2" x 1½" 7260 7020 5760 4320 90'
Reduced flow will be experienced at 50 hz operation.
www.depcopump.com • 1-800-446-1656 • 727-446-1656
Catalog 112 • Page 5
OBERDOFER & MP AIR CONDITIONING PUMPS
OBERDORFER UP TO 1,440 GPH, UP TO 69,000 BTU, MONEL SHAFT OPTION
104M Series CRUISAIR PM1500BX, P1500BXT & AQUA-AIR AQPM-15
OBERDORFER Oberdorfer’s 104M series is standard equipment on Cruisair & Aqua-Air systems. A 316SS
109MB Series shaft or a monel shaft sleeve option is available to increase motor life. Motors available in
OBERDORFER 115 or 230 vac, 50 or 60 hz, 1 or 3 ph. Motors are equipped with top mount capacitor as
107M & 108M shown in picture. See page 170 for a complete parts list and breakdown.
MP PUMP Model Additional Volts Hz HP Port Size GPH at Feet of Head Max
Number Description AC FPT x MPT 0' 10' 20' 30' Head
SWX125/150
104M-F13 PM1500BX, AQPM-15 115/230 60 1/3 ¾" x ¾" 1440 1200 1020 780 51'
1/3 ¾" x ¾" 1440 1200 1020 780 51'
104M-1-10F36BJ-50/60 P1500BXT 115/230 50/60 1/3 ¾" x ¾" 1440 1200 1020 780 51'
1/3 ¾" x ¾" 1440 1200 1020 780 51'
104M-1-F26 Monel Shaft Upgrade 115/230 60
104M-06-10F36BJ-50/60-316 316SS Shaft Upgrade 115/230 50/60
Reduced flow will be experienced at 50 hz operation.
UP TO 4,200 GPH, UP TO 200,000 BTU, MONEL SHAFT OPTION
CRUISAIR PH3000BX, P3000BXT & AQUA-AIR AQPM-30
Oberdorfer’s 109MB series is standard equipment on Cruisair & Aqua-Air systems. A 316SS
shaft or a monel shaft sleeve option is available to increase motor life. Motors available in 115
or 230 vac, 50 or 60 hz, 1 or 3 ph and several frame options. Motors are equipped with top
mount capacitor as shown in picture. See page 170 for a complete parts list and breakdown.
Model Additional Volts Hz HP Port Size GPH at Feet of Head Max
Number Description AC FPT x FPT 0' 10' 20' 30' Head
109MB-J19 PH3000BX, AQPM-30 115/230 60 ½ 1¼" x 1" 4200 3780 2880 1800 44'
1½" x 1" 4200 3780 2880 1800 44'
109MB-1-10J36BJ-50/60 P3000BXT 115/230 50/60 ½ 1½" x 1" 4200 3780 2880 1800 44'
1½" x 1" 4200 3780 2880 1800 44'
109MB-1-J26 Monel Shaft Upgrade 115/230 60 ½
109MB-10J36BJ-50/60-316 316SS Shaft Upgrade 115/230 50/60 ½
Reduced flow will be experienced at 50 hz operation.
UP TO 4,200 GPH, UP TO 200,000 BTU W/56J TEFC MOTORS
MARINE AIR P120, P700 & CRUISAIR PS1800BX, PS2200BX
Oberdorfer’s 107M & 108M series air conditioning pumps were designed specifically as drop-in
replacements for Scot’s popular 68 & 78 series found on many Marine Air and Cruisair sys-
tems. Each of these Oberdorfer pumps utilizes a precision machined and balanced impeller
providing extremely quiet operation and improved service life. They’re also equipped with
a long-lasting TEFC (totally enclosed fan cooled) motor. See below for cross-reference
information.
Model Additional Imp Volts Hz Mtr HP Port Size GPH at Feet Max
Number Description Dia. AC Frame Mtr FPT x FPT of Head Head
1⁄3 1¼" x 1" 2000gph@15' 49'
107MB-F25 P700, P700Z, PS2200BX 3.44" 115/230 50/60 56 1⁄3 1¼" x 1" 1800gph@15' 35'
107MA-F25 P120, PS1800BX 3.0" 115/230 50/60 56 ½ 1½" X 1½" 4200gph@15' 45'
108MB-J14 3.44" 115/230 50/60 56
Reduced flow will be experienced at 50 hz operation.
UP TO 6,000 GPH, UP TO 500,000 BTU, W/ 56J TEFC MOTORS
MARINE AIR
MP’s SWX series of air conditioning pumps are equipped with enclosed balanced impellers
that ensure optimum efficiency and low horsepower requirements. Upgraded Type 16 carbon/
silicon-carbide/Viton® mechanical seals protect the pump's shaft while extending operational
life. They’re also equipped with a long-lasting TEFC (totally enclosed fan cooled) motor.
Model Imp Volts Hz Mtr HP Port Size GPH at Feet Max
Number Dia. AC Frame Mtr FPT x FPT of Head Head
TEFC
50416 3.25" 230/3ph 50/60 TEFC ½ 1¼" x 1" 2820@ 20' 41'
50417 3.25" 115/230 50/60 TEFC ½ 1¼" x 1" 2820@ 20' 41'
50418 2.95/3.25" 115/230 50/60 TEFC 1⁄3 1¼" x 1" 2160@20' 32'
50425/50426 3.35" 115/230/208/460 50/60 TEFC ¾ 1½" x 1½" 3538@ 30' 40
50423/50424 3.75" 115/230/208/460 50/60 TEFC 1 1½" x 1½" 4680@ 30' 50
50421/50422 4.25" 115/230/208/460 50/60 1½ 1½" x 1½" 6000@ 30' 65
Reduced flow will be experienced at 50 hz operation.
727-446-1656 • 1-800-446-1656 • www.depcopump.com
Page 6 • Catalog 112
SCOT AIR CONDITIONING PUMPS
UP TO 2,000 GPH, UP TO 128,000 BTU, 1¼" X 1" PORTS SCOT
MARINE AIR P100, P120, P700 & CRUISAIR PS1500BX, PS1800BX, PS2200BX 67 & 68 Series
Scot’s 67 and 68 bronze centrifugal series was designed specifically for marine air conditioning SCOT
service. They utilize a carbon/ceramic seal and a 1/3 or ½ hp, 50/60 hz, 48 and 56 frame
motor. Consult our sales department for impeller size and motor requirements. See page 78 Series
171 for a complete parts list and breakdown. SCOT
Model Additional Imp. Volts Hz Mtr HP Port Size GPH at Max 65 & 66 Series
Number Description Dia. AC Frame MTR FPT x FPT Feet of Head Head
SCOT
67 35067 P700, P700Z, PS2200BX 3.44" 115/230 50/60 48 ¹/3 ODP 1¼" x 1" 2000gph@15' 49'
67-3.00 35067 P120, PS1800BX 3.0" 115/230 50/60 48 ¹/3 ODP 1¼" x 1" 1800gph@15' 35' 72 Series
67-2.5 35067 P100, P100Z, PS1500BX 2.5" 115/230 50/60 48 ¹/3 ODP 1¼" x 1" 1500gph@10' 22'
68 35068 P700 3.44" 115/230 50/60 56 ¹/2 TEFC 1¼" x 1" 2000gph@15' 49'
Reduced flow will be experienced at 50 hz operation.
UP TO 3,240 GPH, UP TO 155,000 BTU, 1½" X 1½" PORTS
MARINE AIR P710, P710Z, P711, P711Z
Scot’s 78 bronze centrifugal series was designed specifically for marine air conditioning
service. They utilize a semi-open impeller and a carbon/ceramic seal. Each pump comes
equipped with a ½ to 1 horsepower 50/60 hz TEFC or ODP motor in 48 or 56 frame.
Consult our sales department for impeller size and motor requirements. See page 171 for
a complete parts list and breakdown.
Model Additional Imp. Volts Hz Mtr HP Port Size GPH at Max
Number Description Dia. AC Frame MTR FPT x FPT Feet of Head Head
1½" x 1½" 2400gph@32' 44'
78 Series 48451 P710, P710Z 3.5" 115/230 50/60 56 ½ 1½" x 1½" 2402gph@32' 44'
78 Series 48451 P710, P710Z 3.5" 115/230 50/60 56 ¾ 1½" x 1½" 3240gph@42' 60'
78 Series 48451 P711, P711Z 4.0" 115/230 50/60 56 1 1½" x 1½" 3240gph@44' 60'
78 Series 48451 P711/3PH 4.75" 115/230 50 56 1
Reduced flow will be experienced at 50 hz operation.
UP TO 3,800 GPH, UP TO 178,000 BTU, 1" X ¾" OR 1¼" X 1" PORTS
MARINE AIR 336005, 1010017, 1010018, 1010019
Scot’s 65 & 66 series bronze centrifugal pumps were designed specifically for marine air
conditioning service. They utilize a semi-open impeller and a carbon/ceramic mechanical
seal. Each pump comes equipped with a 1/3 to ¾ horsepower 50/60 hz TEFC motor in 48 or
56 frame. Consult our sales department for impeller size and motor requirements.
Model Additional Imp. Volts Hz HP Port Size GPH at Feet of Head Max
Number Description Dia. AC MTR FPT x FPT 3' 10' 20' 25" Head
65 35065 3.44" 115/230 50/60 ¾ 1¼" x 1" 3720 3720 3300 3000 47'
65 35065 Marine Air #1010019 3.31" 115/230 50/60 ½ 1¼" x 1" 3300 3300 2820 2460 42'
65 35065 Marine Air #1010018 3.12" 115/230 50/60 ½ 1¼" x 1" 2820 2820 2220 35'
65 35065 Marine Air #1010017 2.87" 115/230 50/60 1/3 1¼" x 1" 2400 2220 1320 27'
66 35066 Marine Air # 336005 3.44" 115/230 50/60 1/3 1" x ¾" 2400 2250 1920 1260 47'
66 35066 Marine Air # 336005 3.0" 115/230 50/60 1/3 1" x ¾" 2040 1860 1380 33'
66 35066 Marine Air # 336005 2.5" 115/230 50/60 1/3 1" x ¾" 1500 1260 300 21'
Reduced flow will be experienced at 50 hz operation.
UP TO 1,920 GPH, UP TO 92,000 BTU, 1¼" X 1" PORTS
MARINE AIR P110Z-3PH, P700Z-3PH, P700-380/3PH, P700-460/3PH
Scot’s 72 series bronze centrifugal pumps were designed specifically for marine air conditioning
service. They utilized a carbon ceramic mechanical seal and ½ horsepower 50/60 hz 56 frame
motor. Consult our sales department for impeller size and motor requirements.
Model Additional Imp. Volts Hz HP Port Size GPH at Max
Number Description Dia. AC MTR FPT x FPT Feet of Head Head
72 Series 47372 P110Z-3PH 2.75" 230 3ph 50/60 ½ 1¼" x 1" 1200gph@18' 31'
72 Series 47372 P700Z-3PH 3.5" 230 3ph 50/60 ½ 1¼" x 1" 1920gph@32' 49'
72 Series 47372 P700-460/3PH 3.5" 460 3ph 50/60 ½ 1¼" x 1" 1920gph@32' 49'
72 Series 47372 P700-380/3PH 3.75" 380 3ph ½ 1¼" x 1" 1260gph@32' 37'
50
Reduced flow will be experienced at 50 hz operation.
www.depcopump.com • 1-800-446-1656 • 727-446-1656
Catalog 112 • Page 7
N AVA L B R O N Z E & H I G H V O L U M E A C P U M P S
AMPCO UP TO 3,300 GPH, UP TO 158,000 BTU, 1" X ¾" & 1¼" X 1"
KC Series HIGH GRADE NAVAL BRONZE (NICKEL ALUMINUM BRONZE)
PRICE Ampco’s extremely durable nickel aluminum bronze (naval bronze) centrifugal KC series resists
corrosion, electrolysis, and cavitation damage. They come standard with 115 or 230 vac 50/60
CD Series hz ODP motors. Additional models are available in 3 ph, 50/60 hz, TEFC, IEEE-45 and other
custom configurations. Larger capacity models also available.
PRICE
Model Imp. Volts Hz HP Port Size GPH at Feet of Head Max
XT Series Number Dia. Options FPT x FPT 25' 31' 42' 51' Head
SCOT KC2 Series 3.625" 115/230/380/460 50/60 ½ 1" x ¾" 1500 1140 7200 - 48'
KC2 Series 4.25" 115/230/380/460 50/60 ¾ 1" x ¾" - 1740 1560 1260 70'
121 Series KC2 Series 4.75" 115/230/380/460 50/60 1 1" x ¾" - - 2040 1860 88'
KC2 Series 50' 75' 95' 110'
KC2 Series 5.0" 115/230/380/460 50/60 1½ 1¼" x 1" 3180 2400 1200 - 100'
5.5" 115/230/380/460 50/60 2 1¼" x 1" - 3420 2820 2100 125'
Reduced flow will be experienced at 50 hz operation.
UP TO 10,500 GPH, UP TO 460,000 BTU, 1¼" X 1" & 2" X 1½"
HIGH VOLUME IN BRONZE & 316 STAINLESS STEEL
Available in bronze or 316 stainless steel construction, Price Pump’s CD series provide
high flow volumes to meet the requirements for large multi-unit systems or high discharge
head to deliver sufficient flow to remote or elevated installations. Each pump comes
equipped with a stainless steel shaft extension that isolates the motor shaft from direct
contact with seawater. See page 171 for complete parts list.
Model Additional HP Volts Hz Port Size GPH Max
Number Description Range Options FPT x FPT Flow Range Head
CD100 Series ODP, TEFC & IEEE-45 Mtrs ¼ -2 115/230/380/460 50/60 1¼" x 1" 720-4500 95'
CD150 Series ODP, TEFC & IEEE-45 Mtrs ¼ -3 115/230/380/460 50/60 2" x 1½" 1500-10,500 85'
Reduced flow will be experienced at 50 hz operation.
UP TO 24,000 GPH, UP TO 1,150,000 BTU, 1½" X 1" TO 3" X 2"
HIGH VOLUME, HIGH HEAD IN BRONZE & 316 STAINLESS STEEL
Available in bronze or 316 stainless steel construction, Price Pump’s XT series builds on the
performance of the CD series by providing even greater flow volumes to meet the requirements
for larger multi-unit systems and higher discharge heads to deliver ample flow to remote or
elevated instillations. Multiple voltage & motor enclosures are available upon request.
Model Additional HP Volts Hz Port Size GPH Max
Number Description Range Options FPT x FPT Flow Range Head
XT100 Series ODP, TEFC & IEEE-45 Mtrs ½ -5 115/230/380/460 50/60 1½" x 1" 600-7200 148'
XT150 Series ODP, TEFC & IEEE-45 Mtrs 1-10 115/230/380/460 50/60 2" x 1½" 2100-15,000 155'
XT200 Series ODP, TEFC & IEEE-45 Mtrs 3-15 115/230/380/460 50/60 3" x 2" 3000-24,000 135'
Reduced flow will be experienced at 50 hz operation.
UP TO 25,800 GPH, UP TO 1,238,000 BTU, 2½" X 2½"
HIGH VOLUME, HIGH HEAD IN BRONZE
Scot’s 121 series provides high volume flow at high heads to provide the volume and pressures
required for large multi-unit systems or installations with long plumbing runs or high elevation.
Consult our sales department for impeller size and motor requirements.
Model Additional Imp. Volts Hz HP Port Size GPH at Feet of Head Max
Number Description Dia. AC MTR FPT x FPT 20' 40' 60' Head
121 Series 57121 Flow @ 60 hz 5.62" 230 3ph 50/60 10 2½" x 2½" 25,800 22,500 20,100 133'
121 Series 57121 Flow @ 60 hz 5.13" 230 3ph 50/60 7.5 2½" x 2½"
121 Series 57121 Flow @ 60 hz 4.75" 230 3ph 50/60 5 2½" x 2½" 22,800 21,000 16,500 105'
121 Series 57121 Flow @ 60 hz 4.50" 230 3ph 50/60 3 2½" x 2½"
121 Series 57121 Flow @ 60 hz 4.00" 230 3ph 50/60 2 2½" x 2½" 19,800 16,200 12,000 84'
Reduced flow will be experienced at 50 hz operation.
18,000 13,200 7,500 70'
12,600 6,900 47'
727-446-1656 • 1-800-446-1656 • www.depcopump.com
Page 8 • Catalog 112
MAGNETIC DRIVE AIR CONDITIONING PUMPS
UP TO 1,000 GPH, UP TO 48,000 BTU, OPEN PAINTED MOTOR LITTLE GIANT
MARINE AIR P510, PMA500 & P310 3-MD-SC / 5-MD-SC
These Little Giant pumps are most often found on Marine Air systems. The 3-MD-SC will MARCH
cool single and multiple unit systems up to 24,000 BTU. The 5-MD-SC will cool single and
multiple unit systems up to 48,000 BTU. Both pumps feature leak-proof, sealless magnetic
drives. Wingnut screws allow for easy pump head repair. Available in 115 or 230 vac 50/60 hz.
Model Additional Volts Hz Port Size GPH at Feet of Head Max
Number Description AC FPT x MPT 1' 3' 6' Head
3-MD-SC 115V P510, PMA500 115 60 ¾" x ½" 750 710 665 22'
3-MD-SC 230V PMA500C, PMA500CK 230 50/60 ¾" x ½" 750 710 665 22'
5-MD-SC 115V P310 115 50/60 1" x ½" 1050 990 920 27'
5-MD-SC 230V 230V version of P310 230 50/60 1" x ½" 1050 990 920 27'
Reduced flow will be experienced at 50 hz operation.
UP TO 510 GPH, UP TO 24,000 BTU, OPEN PAINTED MOTOR
KING AIR REPLACEMENT PUMP
The March model MDX-3-5/8 is found on a large percentage of the King Air air conditioning
units. The magnetic drive design eliminates the conventional seal found in most pumps,
reducing the chance of leaks. Standard with 115 vac 50/60 hz motor. For an upgraded model
with a waterproof sealed motor, see the March Pump model LC-3CP-MD on page 4.
Model Additional Volts Hz Port Size GPH at Feet of Head Max
Number Description AC Barb x Barb 1' 3' 6' Head
MDX-3-5/8 King Air replacement 115 50/60 ⅝" x ⅝" 510 480 420 19'
Reduced flow will be experienced at 50 hz operation.
MDX-3-5/8
UP TO 5,100 GPH, UP TO 240,000 BTU, HEAVY DUTY INDUSTRIAL IWAKI
FOR LARGE, MULTI-UNIT AND SYSTEMS REQUIRING LONG SUPPLY LINES MX Series
Iwaki’s MX series is a heavy-duty industrial grade magnetic drive centrifugal pump. Available
with TEFC motors in various flow and horsepower configurations. These pumps will meet
the needs of larger multi-unit systems and installations requiring higher head pressures.
They can supply remotely located or elevated systems. The carbon bearing option allows
for periods of running dry.
Model Additional Volts Hz Port Size GPH at Feet of Head Max
Number Description AC MPT x MPT 10' 20' 30' 40' Head
MX 400 Series TEFC Motors 115/230/460 50/60 1½" x 1½" 3900 3500 2700 800 43'
MX 401 Series TEFC Motors 115/230/460 50/60 1½" x 1½" 5100 4800 4320 3720 68'
Reduced flow will be experienced at 50 hz operation.
UP TO 13,260 GPH, UP TO 636,000 BTU, HEAVY DUTY INDUSTRIAL FINISH THOMPSON
FOR LARGE, MULTI-UNIT AND SYSTEMS REQUIRING LONG SUPPLY LINES DB Series
Finish Thompson’s DB series is a heavy duty industrial grade magnetic drive centrifugal pump.
Available with TEFC motors in various flow and horsepower configurations. Features include
durable polypropylene construction, replaceable shaft, run dry capability and more. Pull back
design allows the impeller to be changed without having to replace the inner drive. These
pumps will meet the needs of larger multi-unit, remote or elevated systems and installations
requiring higher head pressures.
Model Volts Options Hz Port Size Max Flow Max Head
DB6 & 6H Series 115/230/380/460 50/60 1" FPT x 1" MPT 2520 gph 54'
DB7-10 Series 115/230/380/460 50/60 1½" FPT x 1½" MPT 5760 gph 51'
DB11 & 15 Series 115/230/380/460 50/60 2" FPT x 1½" MPT 6960 gph 74'
DB22 Series 115/230/380/460 50/60 2" x 2" NPT or Flange 13,260 gph 201'
Reduced flow will be experienced at 50 hz operation.
www.depcopump.com • 1-800-446-1656 • 727-446-1656
Catalog 112 • Page 9
SPECIALTY & EUROPEAN AIR CONDITIONING
CAL UP TO 1,200 GPH, UP TO 57,000 BTU, ¾" X ½" & ¾" X ¼"
MS Series MARINE AIR PC400,500 & PDA250,500 & CRUISAIR PDS250,500,900
GIANNESCHI Cal Marine manufactures a series of pumps used on Marine Air and Cruisair units. Cal’s MS
series utilizes water-tight stainless steel encapsulated oil-filled motors and plastic pump heads.
An optional base with stainless steel strap is available for mounting.
Model Marine Air Cruisair Volts Hz HP Port Size GPH at Feet of Head Max
Number Part# Part# AC MPT x MPT 1' 3' 9' Head
MS-1200 PDS1200 115 or 230 50/60 1/9 ¾" x ½" 1200 980 660 20'
¾" x ½" 900 720 425 17'
MS-900 PDS900 115 or 230 50/60 1/12 ¾" x ½" 580 425 320 15'
¾" x ¼" 320 260 140 12'
MS-580 PC500 & PDA500 PDS500 115 or 230 50/60 1/15
MS-320 PC400 & PDA250 PDS250 115 50/60 1/40
Reduced flow will be experienced at 50 hz operation.
UP TO 2,500 GPH, UP TO 112,000 BTU, 1" X 1"
ITALIAN PUMP BRAND COMMONLY FOUND ON EUROPEAN VESSELS
Gianneschi pumps have been manufactured in Italy since 1969 to serve the European yacht
market. As more European yachts make their way to the Americas the need for these pumps has
grown. Depco is an official distributor for Gianneschi and stocks pumps, parts, and repair kits.
Model Additional Volts Hz HP Port Size GPH at Feet of Head Max
Number Description AC FPT x FPT 20' 30' 40' 50' Head
CB22-95 Flow @ 60 hz 115/230 50/60 ¾ 1" x 1" 1584 1188 528 41'
CB22-110 Flow @ 60 hz 115/230 50/60 1 1" x 1" 2190 1980 1689 1320 59'
CB22-120 Flow @ 60 hz 115/230 50/60 1½ 1" x 1" 2508 2295 2112 1875 68'
CB 20/22 Series Reduced flow will be experienced at 50 hz operation.
CALPEDA UP TO 1,320 GPH, UP TO 63,000 BTU, 1" X 1"
C20/22 Series ITALIAN PUMP BRAND COMMONLY FOUND ON EUROPEAN VESSELS
SHERWOOD Calpeda, a European pump manufacturer, has been manufacturing industrial, domestic, and
marine pumps for over 50 years. Depco specializes in sourcing or crossing-over specialty
COMBBXX Series pumps from around the world. Call us for help identifying, replacing, or repairing your hard
to find marine pump.
Model Additional Volts Hz HP Port Size GPH at Feet of Head Max
Number Description AC FPT x FPT 20' 40' 50' 60' Head
CB20E-60 Also available in 50 hz 230 60 ½ 1" x 1" 1320 600 40'
CB22/1E-60 Also available in 50 hz 230 60 ¾ 1" x 1" 1320 1320 1320 900 62'
CB22E-60 Also available in 50 hz 230 60 ¾ 1" x 1" 1320 1320 1320 1320 73'
Reduced flow will be experienced at 50 hz operation.
UP TO 6,480 GPH, UP TO 311,000 BTU, 1¼" X 1" & 1½" X 1¼"
REPLACES TEEL & DAYTON PUMPS
Sherwood’s bronze centrifugal pumps are often found in the field re-labeled under the
aftermarket names Dayton or Teel. Our sales department can easily cross-reference the
pump from Dayton or Teel to Sherwood. These commercial duty pumps come with a wide
variety of options.
Model Additional Volts Hz HP Port Size GPH at Feet of Head Max
Number Description AC FPT x FPT 10' 20' 30' 40' Head
COMBB22 Replaces Teel/Dayton Pump 115/230 60 ½ 1¼" x 1" 3300 2700 1980 600 42'
COMBB33 Replaces Teel/Dayton Pump 115/230 60 ¾ 1¼" x 1" 4320 3780 3186 2460 55'
COMBB44 Replaces Teel/Dayton Pump 115/230 60 1 1½" x 1¼" 6480 5880 5160 4260 58'
727-446-1656 • 1-800-446-1656 • www.depcopump.com
Page 10 • Catalog 112
SELF-PRIMING AIR CONDITIONING
UP TO 1,300 GPH, UP TO 69,000 BTU, ¾" X ¾" PRIMETIME
COMPACT, IGNITION PROTECTED AND WILL NOT AIR-LOCK! 115 VAC & 230 VAC
The Primetime self-priming pump will not air-lock! It will prime up to 6 feet and is ideal for
installations prone to air-lock. This rugged cast 316 stainless steel pump comes equipped OBERDORFER
with a carbon/ceramic mechanical seal, ¾" x ¾" fpt ports and a 316 stainless steel impeller.
The 115 and 230 vac versions come with a 6' cord. 115 vac version has a plug on the cord. 300B Series
Dimensionally compact, it will fit within an envelope of 9 ½" x 5" x 7". Also available in 12
vdc, 24 vdc, or hydraulic drive. SCOT
Model Additional Volts Hz Port Size GPH at Feet of Head Max 77 Series
Number Description AC FPT x FPT 10' 15' 20' Head
MP PUMP
Primetime 115 vac Flow at 115 vac 115 60 ¾" x ¾" 1260 1020 630 26'
Primetime 230 vac 1260 1020 630 26' FMX100
Primetime 230 vac Flow at 230 vac, 60 hz 230 50/60 ¾" x ¾" 1260 420 16'
Flow at 230 vac, 50 hz 230 50/60 ¾" x ¾"
UP TO 1,200 GPH, UP TO 69,000 BTU, 1" X 1"
CRUISAIR P1200BXT-SP
Oberdorfer’s 300B series is standard equipment on Cruisair systems requiring a self-priming
pump. A 316SS shaft or a monel shaft sleeve option is available to increase motor life. Motors are
available in 115 or 230 vac, 50 or 60 hz, 1 or 3 ph and multiple enclosures. Custom modifications
available usually the same day. See page 170 for a complete parts list and breakdown.
Model Additional Volts Hz HP Port Size GPH at Feet of Head Max
Number Description AC FPT x FPT 5' 10' 20' 30' Head
300B-F13 115/230 60 1/3 1" x 1" 1200 1020 720 270 35'
1" x 1" 1200 1020 720 270 35'
300B-10J36BJ-50/60-316 Cruisair# P1200BXT-SP 115/230 50/60 ½ 1" x 1" 1200 1020 720 270 35'
300B-1-F26 Monel Shaft Upgrade 115/230 60 1/3
Reduced flow will be experienced at 50 hz operation.
UP TO 6,120 GPH, UP TO 294,000 BTU, 1½" X 1½"
HIGH VOLUME CENTRIFUGAL IN BRONZE W/SUCTION STRAINER
Scot’s 77 series is the self-priming version of the Scot 78 bronze flooded suction centrifugal.
Scot’s self-priming chamber includes a suction strainer with transparent cover for viewing. They
utilize a carbon/ceramic seal and a 50/60 hz, 56 frame motor. Consult our sales department
for impeller size and motor requirements.
Model Additional Voltage Hz HP Port Size GPH at Feet of Head Max
Number Description Options Options MTR FPT x FPT 20' 30' 40' 60' Head
77 Series 48377 ODP & TEFC Mtrs 115/230/380/460 50/60 ¾ 1½" x 1½" 3360 2880 2220 50'
77 Series 48377 ODP & TEFC Mtrs 115/230/380/460 50/60 1 1½" x 1½" 4560 4020 3480 2220 66'
77 Series 48377 ODP & TEFC Mtrs 115/230/380/460 50/60 1½ 1½" x 1½" 5400 5100 4440 2820 70'
77 Series 48377 ODP & TEFC Mtrs 115/230/380/460 50/60 2 1½" x 1½" 6120 6120 5520 3950 81'
Reduced flow will be experienced at 50 hz operation.
UP TO 3,300 GPH, UP TO 144,000 BTU, 1" X 1"
ABS APPROVED, AVAILABLE IN HYDRAULIC OR PEDESTAL MOUNT
The FMX100 self-priming centrifugal by MP is constructed of rugged 316 stainless steel and
capable lifting water up to 17 feet! It is available in 115/230 vac 50/60 hz electric drive,
hydraulic drive, or pedestal drive (for pulley or long-coupled mounting). All models include
a carbon/ceramic/Viton® mechanical seal.
Model Additional Voltage Hz HP Port Size GPH at Feet of Head Max
Number Description Options Options MTR FPT x FPT 20' 30' 40' 60' Head
FMX100 Flow at 3450 rpm 115/230 50/60 ¾ 1" x 1" 3300 2940 2700 2400 40'
Reduced flow will be experienced at 50 hz operation.
www.depcopump.com • 1-800-446-1656 • 727-446-1656
Catalog 112 • Page 11
M A R C H M A R I N E R E F R I G E R AT I O N P U M P S
MARCH UP TO 2.7 GPM, EPOXY ENCAPSULATED MOTOR, ½" OUTLET
893-04 ½" GRUNERT P800 REPLACEMENT PUMP
MARCH This quiet, low amp draw March magnetic drive centrifugal is standard equipment on Grunert’s
small to medium size refrigeration systems. The standard 893-04 and 893-06 utilize brush
893 Series ⅜" motors while the 893-09 and 893-10 series utilize a brushless motor upgrade that is built to
last up to 50,000 hours in normal operation.
MARCH
Model Additional Volts Amps Port Size GPM at Feet of Head Max
809BRC-HS Series Number Description DC DC FPT x Barb 1' 3' 6' Head
MARCH 893-04 ½" Grunert# P800 12 1 ⅜ " x ½" 2.7 2.4 1.75 10.5'
893-06 ½" 24 vdc version of P800 24 0.5 ⅜ " x ½" 2.7 2.4 1.75 10.5'
809BR Series 893-09 ½" Brushless version of P800 12 1 ⅜ " x ½" 2.7 2.4 1.75 10.5'
893-10 ½" 24 vdc brushless version of P800 24 0.5 ⅜ " x ½" 2.7 2.4 1.75 10.5'
UP TO 2.7 GPM, EPOXY ENCAPSULATED MOTOR, ⅜" OUTLET
ADLER BARBOUR E1390, TECHNICOLD TE-27 & MANY OTHERS
These quiet, low amp draw March magnetic drive centrifugals are standard equipment on
many small to medium size refrigeration systems. The standard 893-04 and 893-06 utilize brush
motors while the 893-09 and 893-10 series utilize a brushless motor upgrade that is built to
last up to 50,000 hours in normal operation.
Model Additional Volts Amps Port Size GPM at Feet of Head Max
Number Description DC DC FPT x Barb 1' 3' 6' Head
893-04 Adlr Bbr E1390, Technicold TE-27 12 1 ⅜" x ⅜" 2.7 2.4 1.75 10.5'
893-06 24 vdc version of 893-04 24 0.5 ⅜" x ⅜" 2.7 2.4 1.75 10.5'
893-09 Brushless version of 893-04 12 1 ⅜" x ⅜" 2.7 2.4 1.75 10.5'
893-10 24 vdc brushless version of 893-04 24 0.5 ⅜" x ⅜" 2.7 2.4 1.75 10.5'
UP TO 7.5 GPM, BRONZE MAG DRIVE, ¾" X ½" PORTS
GRUNERT P900 REPLACEMENT PUMP
The continuous duty March 809 bronze pump series utilizes a magnetic drive impeller and
a heavy-duty DC motor with long-lasting replaceable brushes. Grunert uses this 809 BRC-HS
high-speed center inlet version on their large refrigeration units. A brushless motor version
is also available.
Model Additional Volts Amps Port Size GPM at Feet of Head Max
Number Description DC DC MPT x MPT 0' 3' 6' Head
809BRC-HS-12 Grunert P900 12 3.5 ¾" x ½" 7.5 5.1 4.7 15.5'
809BRC-HS-24 24 vdc version of P900 24 1.8 ¾" x ½" 7.5 5.1 4.7 15.5'
UP TO 8 GPM, BRONZE MAG DRIVE, ½" X ½" PORTS
HIGH FLOW FOR LARGER REFRIGERATION SYSTEMS
These continuous duty March 809 bronze in-line pumps utilize a magnetic drive impeller and
a heavy-duty DC motor with long-lasting replaceable brushes. They are found on many larger
refrigeration systems. A brushless motor version is also available.
Model Additional Volts Amps Port Size GPM at Feet of Head Max
Number Description DC DC MPT x MPT 1' 3' 6' Head
809BR 12 Low speed motor 12 1.1 ½" x ½" 5 4 2.25 7.1'
809BR 24 Low speed motor 24 0.55 ½" x ½" 5 4 2.25 7.1'
809BR HS 12 High speed motor 12 3.5 ½" x ½" 8 7.25 6.25 15.5'
809BR HS 24 High speed motor 24 1.8 ½" x ½" 8 7.25 6.25 15.5'
727-446-1656 • 1-800-446-1656 • www.depcopump.com
Page 12 • Catalog 112
M A R I N E R E F R I G E R AT I O N P U M P S
UP TO 4.5 GPM, 115 VAC, ½" X ½" PORTS SHURFLO
SELF-PRIMING, DRY RUNNING DIAPHRAGM PUMP
Shurflo’s 4 chamber diaphragm pump delivers smooth continuous flow and will not air-lock.
Its self-priming design will lift fluid up to 6 feet vertically allowing the pump to purge any air
taken in through the suction line during vessel movement. Being a diaphragm pump it will
run dry without damage. This pump features a continuous-duty motor.
Model Additional Volts Hz Port Size GPM at Feet of Head Max
Number Description AC MPT 1' 3' 6' Head
4758-172-A80 Self-priming to 6' 115 60 ½" x ½" 4.5 4.4 4.3 127'
UP TO 1.95 GPM, 12 VDC, ½" X ½" PORTS 4758-172-A80
SELF-PRIMING, DRY RUNNING DIAPHRAGM PUMP SHURFLO
Shurflo’s 3 chamber diaphragm pump, like its big brother above, delivers smooth continuous 3 Chamber Series
flow and will not air-lock. Its self-priming design will lift fluid up to 6 feet vertically allowing
the pump to purge any air taken in through the suction line during vessel movement. Being a FLOJET
diaphragm pump it will run dry without damage. This pump features a continuous-duty motor.
Model Additional Volts Amps Port Size GPM at Feet of Head Max
Number Description DC DC MPT 1' 3' 6' Head
8050-261-105 Self-priming to 6' 12 1.8 ½" x ½" 0.6 0.6 0.6 70'
4728-110-E10 Self-priming to 4' 12 2.9 ½" x ½" 1.95 1.90 1.85 45'
UP TO 2 GPM, 12 & 24 VDC, ½" X ½" PORTS
SELF-PRIMING, DRY RUNNING DIAPHRAGM PUMP
Low flow self-priming diaphragm pumps like these from Flojet eliminate the potential for
air-lock in a system. Their self-priming design will lift water up to 6 feet, run dry without
damage, and smoothly deliver up to 2 gpm.
Model Additional Volts Amps Port Size GPM at Feet of Head Max
Number Description DC DC Barb 1' 3' 6' Head
04105-512 Self-priming to 6' 12 1.2 ½" x ½" 1.5 1.5 1.5 50'
04105-524 Self-priming to 6' 24 1.0 ½" x ½" 2 2 2 50'
4105 Series
UP TO 6.9 GPM, 12 & 24 VDC, ⅝" OR ¾" PORTS JOHNSON PUMP/JABSCO
COMPACT MAGNETIC DRIVE CENTRIFUGALS Centrifugals
These compact magnetic drive centrifugal pumps by Johnson Pump and Jabsco provide
continuous duty operation for marine refrigeration with very low electric consumption.
These models are NOT self-priming and must be mounted below the waterline to provide a
flooded suction.
Model Number Model Number Pump Port Size GPM at Feet of Head
12 VDC 24 VDC Brand Barb 3' 5'
10-24501-03 CM10P7-1 10-24501-04 CM10P7-1 Johnson ⅝" x ⅝" 4 3.2
Johnson ¾" x ¾" 5 3.9
10-24502-03 CM10P7-1 10-24502-04 CM10P7-1 Johnson ⅝" x ⅝" 5.3 4.2
Johnson ¾" x ¾" 6.9 5.2
10-24503-03 CM30P7-1 10-24503-04 CM30P7-1 Jabsco ¾" x ¾" 3.7 2
10-24504-03 CM30P7-1 10-24504-04 CM30P7-1
59510-0012
Higher flow models available
www.depcopump.com • 1-800-446-1656 • 727-446-1656
Catalog 112 • Page 13
C H I L L E D WAT E R R E C I R C U L ATO R S
IN-LINE RECIRCULATORS UP TO 1,980 GPH, FLANGED INLINE PORTS
Bell & Gossett, Grundfos, Wilo IN-LINE RECIRCULATORS—CHOICES BEYOND WHAT’S SHOWN
In-line recirculating pumps position their inlet and outlet ports on opposite sides of the pump
housing. This positioning allows for easy installation, maintenance, and pump replacement.
Call us for help identifying, replacing or repairing these industrial pumps found in marine
applications.
Brand Model Volts Hz HP Max Flow Max Head
Bell & Gossett 100 Series 8'
Grundfos UP15-42F 115 or 230 vac 50 or 60 1/12 33 gpm 15'
Grundfos UP26-96F
Wilo TOP-Z 30/7 115 vac 60 1/25 17 gpm 29.8'
17'
115 vac 60 1/12 28 gpm
230 vac 50 1/12 30 gpm
Reduced flow will be experienced at 50 hz operation.
GIANNESCHI UP TO 2,340 GPH, 1" X 1"
CB Series ITALIAN PUMP BRANDS COMMONLY FOUND ON EUROPEAN VESSELS
SCOT Gianneschi pumps have been manufactured in Italy since 1969 to serve the European yacht
market. As more European yachts make their way to the Americas the need for these pumps
17, 121 & 206 Series has grown. Depco is an official distributor for Gianneschi pumps and stocks pumps, parts,
and repair kits.
PRICE
Model Additional Phase Hz Port Size GPH at Feet of Head Max
XT Series Number Description FPT x FPT 20' 40' 50' 60' Head
CB22-5 Flow at 60 hz 1 or 3 phase 50/60 1" x 1" 1680 1380 780 - 43
CB22-110 Flow at 60 hz 2 or 3 phase 50/60 1" x 1" 2580 2220 2040 1560 77
CB22-120 Flow at 60 hz 3 or 3 phase 50/60 1" x 1" 2820 2640 2340 1980 96
20' 40' 50' 60'
CB40-100 Flow at 60 hz 1 or 3 phase 50/60 1½" x 1½" 4680 3720 2280 - 73
CB40-120 Flow at 60 hz 2 or 3 phase 50/60 1½" x 1½" 5820 4920 3960 2640 88
Reduced flow will be experienced at 50 hz operation.
UP TO 16,500 GPH, 2" X 2" & 2½" X 2½"
MARINE AIR #P715CW
Scot’s heavy-duty bronze centrifugal pumps are used by Marine Air on the majority of
their chilled water system. All sizes carry the same Marine Air model number, P715CW.
By verifying the voltage, horsepower and port sizes our sales department can identify the
correct replacement pump.
Model Additional Imp. Volts Hz HP Post Size GPH at Max
Number Description Dia AC MTR FPT x FPT Feet of Head Head
17 57017 Marine Air#P715CW 4" 230-3ph 60 1½ 2" x 2" 4920 gph @ 40' 50'
17 57017 Marine Air#P715CW 4.5" 230/460-3ph 60 2 2" x 2" 7380 gph @ 40' 71'
17 57017 Marine Air#P715CW 4.75" 380-3ph 50 2 2" x 2" 5580 gph @ 40' 56'
121 57121 Marine Air#P715CW 4.75" 380-3ph 50 3 2½" x 2½" 13,500 gph @ 40' 60'
206 57206 Marine Air#P715CW 5.13" 380-3ph 50 5 2½" x 2½" 16,500 gph @ 40' 70'
UP TO 24,000 GPH, 1½" X 1", 2" X 1½" & 3" X 2"
HIGH VOLUME, HIGH HEAD BRONZE CENTRIFUGALS
Price Pump’s XT series comes in three port configurations providing a wide range of flows
to meet most marine chilled water applications. The JM frame motors utilized by this pump
series are specifically designed for heavy-duty applications. Motor options include ODP, TEFC,
and IEEE-45 in single and three phase voltages.
Model Additional HP Volts Hz Port Size GPH Max
Number Description Range Options Options FPT x FPT Flow Range Head
XT100AB Series ODP, TEFC & IEEE-45 Mtrs 1½-5 115/230/460 50/60 1½" x 1" 600-7200 148'
XT150AB Series ODP, TEFC & IEEE-45 Mtrs 1-10 115/230/460 50/60 2" x 1½" 2100-15,000 155'
XT200AB Series ODP, TEFC & IEEE-45 Mtrs 3-15 115/230/460 50/60 3" x 2" 3000-24,000 135'
Reduced flow will be experienced at 50 hz operation.
727-446-1656 • 1-800-446-1656 • www.depcopump.com
Page 14 • Catalog 112
WATER SYSTEMS
Flow
Variable GPM................................17-19
Under 2 GPM............................... 16,24
Up to 4 GPM.............................16-20,24
Up to 7 GPM............................. 17-23,94
Up to 11 GPM........................ 17-23,94,95
Over 11 GPM......................... 20-23,94,95
Accumulator Tanks.......................... 25,26
Bottled Water Dispenser........................ 24
Manual Operation................................ 24
Flow Control Sensor............................. 26
Reverse Osmosis............................. 90-92
Calpeda........................................ 23,95
Flojet...........................................17,24
Flotec.......................................... 20,26
Galley Maid....................................... 21
Gianneschi................................ 22,94,111
Groco.......................................... 21,25
Grundfos...................................... 23,95
Headhunter....................................... 95
Jabsco............................... 16,17,20,24,25
Johnson Pump................................ 18,24
Marco.............................................. 20
Pearl............................................... 23
Shurflo...................................... 19,24,25
Starite............................................. 20
Whale...........................................19,24
www.depcopump.com • 1-800-446-1656 • 727-446-1656
Catalog 112 • Page 15
J A B S C O WAT E R S Y S T E M S
JABSCO 2 GPM, “PAR-MAX 2”, UP TO 35 PSI WATER SYSTEM PUMP
PAR-Max™ 2 The PAR-Max™ three-chambered diaphragm pump is designed for vessels requiring a smooth
low flow, 12 or 24 vdc, and an attractive low price. The 31295 series 2 gpm pressure switch
JABSCO cuts off at 35 psi. The pump will self-prime to 7 feet and will run dry without damage.
All models are fitted with an integrated by-pass module to reduce cycling and provide a
PAR-Max™ 3 smooth flow. Quick connect ports and inline strainer included for ease of pump installation.
See page 75 for other port fittings. See page 172 for service parts for older PAR-Max™ 2
JABSCO versions.
PAR-Max™ 4 Model Max GPM Max PSI Volts Fuse Size Inlet/Outlet Dimensions (H x W x L)
12 vdc 10 amps ½" Barb 4.2" x 4.2" x 9.1"
JABSCO 31295-3512-3A 2 35 24 vdc 5 amps ½" Barb 4.2" x 4.2" x 9.1"
31295-3524-3A 2 35
3 GPM, “PAR-MAX 3 & 3HD”, UP TO 60 PSI WATER SYSTEM PUMP
The PAR-Max™ 3 and 3HD provides smooth flow while offering 3 psi options from 25-60
psi. The pump will self-prime to 7 feet and can run dry without damage. All models are
fitted with an integrated by-pass module to reduce cycling and provide a smooth flow. HD
versions feature heavy-duty motors for longer-life, even at high pressure. Quick connect
ports and inline strainer included for ease of pump installation. See page 75 for other port
fittings. See page 172 for service parts for older PAR-Max™ 3 versions.
Model Max GPM Max PSI Volts Fuse Size Inlet/Outlet Dimensions (H x W x L)
25 12 vdc 10 amps ½" Barb 4.2" x 4.2" x 9.1
31395-2512-3A 3 25 24 vdc 5 amps ½" Barb 4.2" x 4.2" x 9.1
40 12 vdc 10 amps ½" Barb 4.2" x 4.2" x 9.1
31395-2524-3A 3 40 24 vdc 5 amps ½" Barb 4.2" x 4.2" x 9.1
40 12 vdc 15 amps ½" Barb 3.8" x 4.1" x 8.6"
31395-4012-3A 3 60 12 vdc 15 amps ½" Barb 3.8" x 4.1" x 8.6"
31395-4042-3A 3
Q301J-115S-3A 3
Q301J-118S-3A 3
4 GPM, “PAR-MAX 4HD”, UP TO 60 PSI WATER SYSTEM PUMP
The PAR-Max™ 4HD offers the smooth flow of the series with three psi options from 25-
60 psi. The pump will self-prime to 7 feet and run dry without damage. All models are
fitted with an integrated by-pass module to reduce cycling and provide a smooth flow. HD
versions feature heavy duty-motors for longer-life, even at high pressure. Quick connect
ports and inline strainer included. See page 75 for other port fittings. See page 172 for
service parts for older PAR-Max™ 4 versions.
Model Max GPM Max PSI Volts Fuse Size Inlet/Outlet Dimensions (H x W x L)
25 12 vdc 15 amps ½" Barb 3.8" x 4.1" x 9.4"
Q401J-115S-3A 4 25 24 vdc 10 amps ½" Barb 3.8" x 4.1" x 9.4"
40 12 vdc 15 amps ½" Barb 3.8" x 4.1" x 9.4"
Q402J-115S-3A 4 40 24 vdc 10 amps ½" Barb 3.8" x 4.1" x 9.4"
60 12 vdc 20 amps ½" Barb 3.8" x 4.1" x 9.4"
Q401J-115S-3A 4 60 24 vdc 10 amps ½" Barb 3.8" x 4.1" x 9.4"
Q402J-115S-3A 4
Q401J-118S-3A 4
Q402J-118S-3A 4
5 GPM, “PAR-MAX 5HD”, UP TO 60 PSI WATER SYSTEM PUMP
The PAR-Max™ 5HD offers the smooth flow of the series while offering two psi options 40
or 60 psi. The pump will self-prime to 7 feet and will run dry without damage. All models
are fitted with an integrated by-pass module to reduce cycling and provide a smooth flow.
HD versions feature heavy-duty motors for longer-life, even at high pressure. Quick connect
ports and inline strainer included for ease of pump installation. See page 75 for other port
fittings. See page 173 for service parts for older PAR-Max™ 5 versions.
Model Max GPM Max PSI Volts Fuse Size Inlet/Outlet Dimensions (H x W x L)
40 12 vdc 20 amps ½" and ¾" Barb 4.7" x 5" x 9.6"
P501J-115S-3A 5 60 12 vdc 20 amps ½" and ¾" Barb 4.7" x 5" x 9.6"
P501J-118S-3A 5
PAR-Max™ 5
727-446-1656 • 1-800-446-1656 • www.depcopump.com
Page 16 • Catalog 112
JABSCO AND FLOJET WATER SYSTEMS
6 GPM, “PAR-MAX 6HD”, UP TO 60 PSI WATER SYSTEM PUMP JABSCO
The PAR-Max™ 6HD offers the smooth flow of the series while offering two psi options 40 or PAR-Max 6
60 psi. The pump will self-prime to 7 feet and will run dry without damage. All models are
fitted with an integrated by-pass module to reduce cycling and provide a smooth flow. HD JABSCO
versions feature heavy duty-motors for longer-life, even at high pressure. Quick connect ports
and inline strainer included for ease of pump installation. See page 75 for other port fittings. Single & Double Stack
Model Max Max Volts Fuse Inlet/ Dimensions FLOJET
GPM Size Outlet (H x W x L)
Quad Series
P601J-215S-3A 6 40 12 vdc 25 amps ¾" Barb 4.7" x 5.1" x 10.2"
P602J-215S-3A 6 40 24 vdc 15 amps ¾" Barb 4.7" x 5.1" x 10.2" FLOJET
P601J-218S-3A 6 60 12 vdc 25 amps ¾" Barb 4.7" x 5.1" x 10.2"
P602J-218S-3A 6 60 24 vdc 15 amps ¾" Barb 4.7" x 5.1" x 10.2"
4.8 AND 9 GPM SINGLE AND DOUBLE STACK WATER SYSTEM
Jabsco’s space-saving stacked units come in 3 sizes to handle a variety of outlets, flows, and
pressures. All come fully assembled with 1 or 2 “PAR-MAX” 40 psi 4.0 gpm pumps, strainer,
and a pre-pressurized accumulator tank to smooth flow and prevent pump cycling. The second
pump on the double-stack systems will turn on as demand increases. This series self-primes
to 10 feet and can run dry without damage.
Model Max Outlets Volts Fuse Inlet/Outlet Running Dimensions (H x W x L)
GPM Served Size PSI
9.8" x 9.4" x 12.2"
52520-1000 4.8 up to 4 12 vdc 15 amps ¾" hose 40 13.6" x 12.2" x 13.6"
52530-1000 9 up to 7 12 vdc 25 amps ¾" hose 40 13.6" x 12.2" x 13.6"
52530-1100 9 up to 7 24 vdc 15 amps ¾" hose 40
3.3 - 4.5 GPM FLOJET WATER SYSTEM PUMPS
The Flojet “Quiet Quad” delivers smooth generous flow and does not require an accumulator
tank! Additional models are available for existing systems with accumulator tanks. See page
177 for service parts.
Max Amps at Inlet/ Pressure Requires Dimensions
Model GPM Volts 10 PSI Outlet Switch Accumulator (H x W x L)
04405-143 ½" Barb & ½" Qest 3.75" x 6.3" x 8.3"
04405-343 3.3 12 vdc 3.9 ½" Barb & ½" Qest 35 psi No 3.75" x 6.3" x 8.3"
04405-443 3.3 24 vdc 2.0 ½" Barb & ½" Qest 35 psi No 3.75" x 6.3" x 8.3"
04406-043 3.3 32 vdc 1.3 ½" Barb & ½" Qest 35 psi No 3.75" x 6.3" x 8.3"
04325-143 3.3 115 vac 0.4 ¾" Barb & ¾" GHT 35 psi No 3.75" x 6.3" x 9.9"
04325-343 4.5 12 vdc 6.0 ¾" Barb & ¾" GHT 40 psi Yes 3.75" x 6.3" x 9.9"
04325-443 4.5 24 vdc 2.5 ¾" Barb & ¾" GHT 40 psi Yes 3.75" x 6.3" x 9.9"
04325-043 4.5 32 vdc 2.0 ¾" Barb & ¾" GHT 40 psi Yes 3.75" x 6.3" x 9.9"
4.5 115 vac 0.5 40 psi Yes
4.5 GPM “BASE MOUNTED” PUMP WITH ACCUMULATOR
Flojet’s compact 2840 series water system utilizes the dependable “Quiet Quad” displayed
above. Each system has an accumulator tank, will function at any angle, and will self-prime
to 5 feet dry or 15 feet wet. See page 177, series pump 4325 for service parts.
Model Max GPM Volts Max. Amps Inlet Outlet Dimensions (H x W x L)
02840-100 4.5 12 vdc 10.0 ¾" Barb ½" Barb/Qest 7.50" x 11.25" x 12.875"
02840-300 4.5 24 vdc 5.0 ¾" Barb ½" Barb/Qest 7.50" x 11.25" x 12.875"
02840-400 4.5 32 vdc 3.8 ¾" Barb ½" Barb/Qest 7.50" x 11.25" x 12.875"
02840-000 4.5 115 vac 1.5 ¾" Barb ½" Barb/Qest 7.50" x 11.25" x 12.875"
12, 24 and 32 vdc and 115 vac
www.depcopump.com • 1-800-446-1656 • 727-446-1656
Catalog 112 • Page 17
JOHNSON WATER SYSTEMS
JOHNSON PUMP 2.9 - 5.2 GPM AQUA-JET WATER SYSTEM PUMPS
Aqua-Jet The Aqua-Jet five chambered diaphragm pump operates with lower noise and water pulsation
than traditional pumps. They come standard with a 40 psi switch and are available in 12 and 24
JOHNSON PUMP vdc in flows up to 5.2 gpm. This series self-primes to 8 feet and can run dry without damage.
½" and ⅜" npt and ¾" hose barb fittings are included. An accumulator tank is recommended.
Flow Master See page 25-26 for tank options.
JOHNSON PUMP Model Max GPM Volts Fuse Size Inlet/Outlet Dimensions (H x W x L)
10-13405-103 2.9 12 vdc 10A ½" & ⅜" NPT, ½" & ¾" Barb 4.3" x 4.6" x 8.02"
Pump & Tank Combo 10-13405-104 2.9 24 vdc 5A ½" & ⅜" NPT, ½" & ¾" Barb 4.3" x 4.6" x 8.02"
10-13395-103 3.5 12 vdc 10A ½" & ⅜" NPT, ½" & ¾" Barb 4.6" x 5.14" x 9.3"
JOHNSON PUMP 10-13395-104 3.5 24 vdc 5A ½" & ⅜" NPT, ½" & ¾" Barb 4.6" x 5.14" x 9.3"
10-13406-103 4.0 12 vdc 10A ½" & ⅜" NPT, ½" & ¾" Barb 4.3" x 5.10" x 9.5"
10-13406-104 4.0 24 vdc 5A ½" & ⅜" NPT, ½" & ¾" Barb 4.3" x 5.10" x 9.5"
10-13406-107 5.2 12 vdc 15A ½" & ⅜" NPT, ½" & ¾" Barb 4.3" x 5.10" x 9.5"
10-13406-108 5.2 24 vdc 8A ½" & ⅜" NPT, ½" & ¾" Barb 4.3" x 5.10" x 9.5"
5.0 GPM VARIABLE SPEED AQUA-JET FLOW MASTER
The Flow Master 5.0 is a five-chamber 50 psi positive displacement diaphragm pump. The
digital controller adjusts water flow as the demand is increased or decreased while maintaining
a very smooth flow. The unique variable flow feature allows the pump to be mounted without
an accumulator tank and still maintain an even flow regardless if one or multiple taps are
being used. This series self-primes to 8 feet and can run dry without damage. ½" and ⅜" npt
and ½" and ¾" hose barb fittings are included.
Model Max GPM Volts Fuse Size Max Inlet /Outlet Dimensions
PSI (H x W x L)
10-13329-103 5.0 12 vdc 15A 50 ½" & ⅜" NPT, ½" & ¾" Barb 4.49" x 8.22" x 9.4"
10-13329-104 5.0 24 vdc 8A 50 ½" & ⅜" NPT, ½" & ¾" Barb 4.49" x 8.22" x 9.4"
3.5 – 5.2 GPM AQUA-JET PUMP AND TANK COMBO
Johnson Pump’s medium capacity pump and tank combination utilizes their 5 chamber Aqua-
Jet diaphragm pump (shown above) together with a 2 liter pre-pressurized tank and inline
strainer. The Aqua-Jet 5 chamber diaphragm pump provides smooth flow and pressure as
demand increases and decreases. The unit’s compact design allows for either vertical or
horizontal installation. The 3.5 gpm series will self-prime to 6 feet while the 5.2 gpm series
self-primes to 8 feet. Both series can run dry without damage. ¾" hose barb fittings are included.
Model Max GPM Volts Fuse Size Max PSI Inlet/Outlet Dimensions (H x W x L)
10-13408-01 3.5 12 vdc 10A 41 ¾" Barb 9.8" x 9" x 14.4"
10-13408-02 3.5 24 vdc 5A 41 ¾" Barb 9.8" x 9" x 14.4"
10-13408-03 5.2 12 vdc 15A 41 ¾" Barb 9.7" x 9" x 14.4"
10-13408-04 5.2 24 vdc 8A 41 ¾" Barb 9.7" x 9" x 14.4"
10.4 GPM AQUA-JET DUAL PUMP AND TANK COMBO
Johnson Pump’s high capacity self-priming pump combos deliver up to 10.4 gpm by utilizing
two parcel connected Aqua Jet pumps fixed on a base with inlet strainers and a 2 liter pre-
pressurized accumulator tank. The Aqua-Jet 5 chamber diaphragm pump provides smooth flow
and pressure as demand increases and decreases. Efficient and compact, Aqua-Jet pumps are
particularly suitable where low amperage and sound levels are desired. This series self-primes
to 8 feet and can run dry without damage. ¾" hose barb fittings are included.
Model Max GPM Volts Fuse Size Max PSI Inlet/Outlet Dimensions (H x W x L)
10-13409-01 10.4 12 vdc 25A 41 ¾" Barb 14.5" x 8.5" x 14.4"
10-13409-02 10.4 24 vdc 15A 41 ¾" Barb 14.5" x 8.5" x 14.4"
Dual Pump & Tank Combo
727-446-1656 • 1-800-446-1656 • www.depcopump.com
Page 18 • Catalog 112
SHURFLO AND WHALE WATER SYSTEMS
2 - 3 GPM “AQUA KING” WATER SYSTEMS SHURFLO
Shurflo’s AQUA KING™ II Junior is ideal for less demanding water system applications. The Aqua King™ II Junior
premium fresh-water pumps are designed for up to two fixtures providing “just like home”
water pressure. This series is ignition protected and features heavy-duty, seamless shell SHURFLO
electro-coated motors with o-ring sealed end bells, completely sealed wire entries, and
sealed switch. This series self-primes to 10 feet and can run dry without damage. ½" fpt Aqua King™ II
swivel and ½" hose barb fittings are included. See page 177 for service parts.
SHURFLO
Model Max Volts Fuse Max Inlet/Outlet Dimensions
Number GPM Size PSI (H x W x L) High Flow Systems
4128-110-E04 2.0 12 vdc 5 30 ½" Barb & ½" MPT 4.1" x 4.9" x 8.2" WHALE
4138-111-E65 3.0 12 vdc 7.5 55 ½" Barb & ½" MPT 4.1" x 4.9" x 8.2"
4138-131-E65 3.0 24 vdc 5 55 ½" Barb & ½" MPT 4.1" x 4.9" x 8.2" Watermaster
4 - 5 GPM “AQUA KING” WATER SYSTEMS
Shurflo’s larger AQUA KING™ II premium fresh-water pumps are designed for boats with
multiple fixtures providing “just like home” water pressure. A built-in mechanical bypass
function enables these pumps to operate at lower flow conditions with minimal cycling.
This series is ignition protected and features heavy-duty, seamless shell electro-coated
motors with o-ring sealed end bells completely sealed wire entries, and sealed switch. This
series self-primes to 10 feet and can run dry without damage. ½" fpt swivel and ½" hose
barb fittings are included. See page 177 for service parts.
Model Max Volts Fuse Max Inlet/Outlet Dimensions
Number GPM Size PSI (H x W x L)
4148-153-E75 4.0 12 vdc 15 55 ½" Barb & ½" MPT 4.77" x 5" x 10"
4148-163-E75 4.0 24 vdc 7.5 55 ½" Barb & ½" MPT 4.77" x 5" x 10"
4158-153-E75 5.0 12 vdc 20 55 ½" Barb & ½" MPT 4.77" x 5" x 10"
4158-163-E75 5.0 24 vdc 15 55 ½" Barb & ½" MPT 4.77" x 5" x 10"
10 GPM EXTREME PRO-BLASTER II AND AQUA KING II COMBO
The High Flow System™ is designed specifically for midsize and large yachts. Delivering 10 gpm
and pressure up to 55 psi to give that “just like home” performance. This system is designed
for intermittent duty. The primary pump (located in front) activates when system pressure
drops to 40 psi. The secondary pump activates when flow demand is above 5 gpm. The heavy-
duty motors are electro-coated with fully sealed wires ideal for the marine environment. This
series self-primes to 10 feet and can run dry without damage. ¾" barb fittings are included.
Model Max Volts Fuse Max Inlet/Outlet Dimensions
Number GPM Size PSI (H x W x L)
4558-153-E75 10 12 vdc 30 55 ¾" Barb 6.1" X 10.4" X 20.8"
4558-163-E75 10 24 vdc 15 55 ¾" Barb 6.1" X 10.4" X 20.8"
2 - 3 GPM WHALE WATERMASTER
The Whale Watermaster® comes in two sizes to offer high flow rates to 1-2 or 3-4 outlets. The
pumps feature quiet operation and smooth flow. They are self-priming up to 10 feet and can
run dry without damage. For extra protection and safety, the wires and pressure switch are
housed internally. 15mm quick connections offer plug ‘n’ play easy installation. Inlet strainer
and additional bsp fittings are included with each pump.
Model Max Volts Fuse Max Inlet/Outlet Dimensions
Number GPM Size PSI (H x W x L)
FW0814 2 12 vdc 5 30 ½" Barb/ ½" MPT 5" x 7" x 8.25"
FW1214 3 12 vdc 7.5 30 ½" Barb/ ½" MPT 5" x 7" x 8.25"
FW1215 3 12 vdc 7.5 45 ½" Barb/ ½" MPT 5" x 7" x 8.25"
FW1225 3 24 vdc 5 45 ½" Barb/ ½" MPT 5" x 7" x 8.25"
www.depcopump.com • 1-800-446-1656 • 727-446-1656
Catalog 112 • Page 19
WATER SYSTEMS
MARCO 2.6 - 9.5 GPM ELECTRONIC GEAR PUMP
Gear Pump Marco offers a line of self-priming automatic electric pumps from 2.6 to 9.5 gpm with helical
PTFE gears, integrated check valve, and electronic control. Its variable-speed motor gradually
JABSCO increases in speed to reach the required flow, eliminating the need for an accumulator tank.
Pumps come equipped with a nickel-plated brass body and stainless steel shaft. Control panels
36950/36800/36900 are available. See page 50.
FLOTEC/STARITE Part Model Max Fuse Max Inlet/Outlet Dimensions
Number Number GPM Volts Size PSI (H x W x L)
Thermoplastic
M164-660-15 UP2/E 2.6 12 or 24 vdc 7.5 29 ⅜" NPT 3¼" x 4⅜" x 6⅝"
FLOTEC M164-602-15 UP3/E 4 12 or 24 vdc 15 36 ⅜" NPT 3¾" x 4⅝" x 6⅞"
M164-622-15 UP6/E 6.9 12 or 24 vdc 20 36 ½" NPT 4¼" x 5¾" x 9⅜"
M164-681-15 UP12/E 9.5 12 or 24 vdc 30 43.5 ½" NPT 4⅜" x 5¾" x 9⅞"
3.0 - 4.2 CLASSIC JABSCO “PAR” WATER SYSTEMS
The “PAR” diaphragm pumps have been used for over 60 years by boat manufacturers throughout
the world. These belt-driven pumps are built to last. They are self-priming, can run dry, come
with a built-in check valve, 39 psi pressure switch, and pulsation dampener. See page 175 for
service parts. An accumulator tank is recommended (see page 25-26).
Model Max GPM Volts Amp/Fuse Size Inlet/Outlet Dimensions (H x W x L)
36950-2000 3.0 12 vdc 6/8 ½" or ⅝" Barb 8½" x 5¾" x 7½"
36950-2010 3.0 24 vdc 3/4 ½" or ⅝" Barb 8½" x 5¾" x 7½"
36950-2020 3.0 32 vdc 2/3 ½" or ⅝" Barb 8½" x 5¾" x 7½"
36800-1000 3.3 12 vdc 6/8 ½" or ⅝" Barb 8⅜" x 6½" x 9⅞"
36800-1010 3.3 24 vdc 3/4 ½" or ⅝" Barb 8⅜" x 6½" x 9⅞"
36800-1020 3.3 32 vdc 2/3 ½" or ⅝" Barb 8⅜" x 6½" x 9⅞"
36900-1000 4.2 12 vdc ½" or ⅝" Barb 10⅛" x 6½" x 9⅞"
36900-1010 4.2 24 vdc 7.5/15 ½" or ⅝" Barb 10⅛" x 6½" x 9⅞"
36900-1020 4.2 32 vdc 3.8/5 ½" or ⅝" Barb 10⅛" x 6½" x 9⅞"
3/4
UP TO 18 GPM THERMOPLASTIC WATER SYSTEM
Flotec and Starite manufacture domestic water pumps that are cost-effective ac powered
fresh-water supply pumps for marine vessels. These series comes in 3 versions with heavy-duty
115/230 vac motors from ½ hp to 1 hp and capacities from 8 to 18 gpm. All are self-priming after
the initial fill. A check or foot valve is recommended. Pump bodies are fiberglass reinforced
thermoplastic for corrosion resistance in the marine environment. FP401215H is a ready to install
pump and stainless steel tank combo.
Model HP Volts AC GPM at 40 PSI Inlet/Outlet Max PSI
FP4012-10 77
FP4022-10 ½ 115 8.0 1¼" FPT/1" FPT 78
FP4032 ¾ 115/230 12.0 1¼" FPT/1" FPT 67
PNC-10 1 115/230 18.0 1¼" FPT/1" FPT 77
FP401215H ½ 115/230 8.0 1¼" FPT/1" FPT 77
½ 115 8.0 1¼" FPT/1" FPT
UP TO 18.4 GPM STAINLESS STEEL WATER SYSTEM
Flotec manufactures stainless steel water pumps that are cost-effective ac powered fresh-
water supply pumps for marine vessels. This series comes with a ¾ or 1 hp 115/230 vac motor
and capacities from 9.6 to 18.4 gpm. Both are self-priming after the initial fill. A check or
foot valve is recommended.
Model HP Volts AC GPM at 40 PSI Inlet/Outlet Max PSI
FP4822 52
FP4832 ¾ 115/230 9.6 1¼" FPT/1" FPT 68
1 115/230 18.4 1¼" FPT/1" FPT
Stainless Steel
727-446-1656 • 1-800-446-1656 • www.depcopump.com
Page 20 • Catalog 112
WAT E R S Y S T E M S
11 GPM PARAGON SENIOR FOR VESSELS 45' AND LARGER GROCO
The Paragon Senior is the premier water system for vessels 45 feet or larger. Each pump is
ignition protected, supplied with a 30-50 psi waterproof switch, self-priming to 10 feet and
features NOFLO™ dry run protection. Accessories include a pressure gauge, 1" strainer, and a
solid-state dry tank switch. An accumulator tank is required (see pages 25-26). See page 181
for service parts.
Model Max GPM Volts Breaker Size Inlet & Outlet Dimensions (H x W x L)
PSR-12V 11 12 vdc 50 amps 1" ID Hose 9" x 6.5" x 20.5"
PSR-24V 11 24 vdc 30 amps 1" ID Hose 9" x 6.5" x 20.5"
PSR-115V 11 115 vac 10 amps 1" ID Hose 9" x 6.5" x 20.5"
7 GPM PARAGON JUNIOR FOR UP TO 50' VESSELS Paragon Senior
The Paragon Junior is a high-efficiency bronze water system pump for vessels up to 50 feet. GROCO
This series is ignition protected, self-priming to 6 feet, will handle multiple outlets, and is
equipped with a 20-40 psi pressure switch and run-dry protection. Accessories include a Paragon Junior
pressure gauge, ¾” strainer, and solid-state dry tank switch. The PJR-A models come with
a bladder style accumulator tank. See page 181 for service parts. GROCO
Max Volts Breaker Inlet/Outlet Dimensions
Model GPM Size (H x W x L)
PJR 12V 8.5" x 8.92" x 10.22"
PJR 24V 7 12 vdc 30 amps ¾" ID Hose 8.5" x 8.92" x 10.22"
PJR-A 12V 7 24 vdc 20 amps ¾" ID Hose 8.5" x 8.92" x 10.22"
PJR-A 24V 7 12 vdc 30 amps ¾" ID Hose 8.5" x 8.92" x 10.22"
7 24 vdc 20 amps ¾" ID Hose
7 GPM PARAGON JUNIOR MOUNTED ON TANK
The Paragon Junior above is also available mounted on a two-gallon accumulator tank.
This system is supplied with a 20-40 psi waterproof pressure switch and features patented
NOFLO™ dry run protection. Accessories include a pressure gauge, ¾" strainer, and a solid-
state dry tank switch.
Model Max Volts Breaker Inlet/Outlet Dimensions
GPM Size (H x W x L)
PJR-B 12V 18.15" x 10.50" x 20.95"
PJR-B 24V 7 12 vdc 30 amps ¾" ID Hose 18.15" x 10.50" x 20.95"
7 24 vdc 20 amps ¾" ID Hose
7-12 GPM GALLEY MAID MR-SERIES Paragon Junior with Tank
The Galley Maid water pressure system pump model MR-Series is available as new or factory GALLEY MAID
rebuilt pumps. Depco also stocks repair parts.
MR-Series
Model Max GPM Voltage Breaker Size Inlet & Outlet Dimensions (H x W x L)
MR-12-7 7 12 vdc 40 amps ¾" NPT/ ½" NPT 12.5" x 10" x 21"
MR-24-7 7 24 vdc 30 amps ¾" NPT/ ½" NPT 12.5" x 10" x 21"
MR-32-7 7 32 vdc 25 amps ¾" NPT/ ½" NPT 12.5" x 10" x 21"
MR-AC-7 7 115 vac 15 amps ¾" NPT/ ½" NPT 12.5" x 10" x 21"
MR-12-10 12 12 vdc 40 amps 1" NPT/ ¾" NPT 14.5" x 10" x 21"
MR-24-10 12 24 vdc 30 amps 1" NPT/ ¾" NPT 14.5" x 10" x 21"
MR-32-10 12 32 vdc 25 amps 1" NPT/ ¾" NPT 14.5" x 10" x 21"
MR-AC-10 12 115 vac 15 amps 1" NPT/ ¾" NPT 14.5" x 10" x 21"
www.depcopump.com • 1-800-446-1656 • 727-446-1656
Catalog 112 • Page 21
G I A N N E S C H I WAT E R S Y S T E M S
GIANNESCHI BRONZE LIQUID RING WATER SYSTEM WITH ACCUMULATOR
Gianneschi Idromini ACB series utilizes their self-priming liquid ring pump design to provide
a dependable water supply to multiple fixtures. Each unit comes with a diaphragm actuated
pressure demand switch, pressure gauge, and accumulator tank. They are most commonly
used in 12 or 24 vdc applications. However, ac versions are available.
Model Number Volts DC Max GPM Max PSI Accumulator Tank Size Dimensions HxWxL
Idromini ACB 61G 12 5.8 32 2 Liter 9.5" x 7" x 13.4"
Idromini ACB 61G 24 5.8 32 2 Liter 9.5" x 7" x 13.4"
Idromini ACB 80 E 12 13.2 44 5 Liter 13.8" x 7" x 16.2"
Idromini ACB 80 E 24 13.2 44 5 Liter 13.8" x 7" x 16.2"
Idromini ACB Series STAINLESS STEEL CENTRIFUGAL “JET PUMP” SYSTEM
GIANNESCHI Gianneschi Ecoinox series utilizes a stainless steel self-priming centrifugal “Jet Pump” designed
to provide dependable water supply to multiple fixtures. The “CE” series shown here comes
with a pressure regulator that maintains a constant flow at each fixture up to the pump's
maximum capacity. Standard diaphragm pressure switches combined with accumulator tanks
are available. Available with or without a pressure regulator.
Model Number Voltage Options Max GPM Max PSI
Ecoinox 1/15 CE 12 and 24 vdc, 230 vac 1 ph 12 43
Ecoinox 2/15 CE 24 vdc, 230 vac 1 ph and 3 ph 50/60 hz 14.5 50
Ecoinox 4/15 CE 24 vdc, 230 vac 1 ph and 3 ph 50/60 hz 21.0 58
ECOINOX BRONZE CENTRIFUGAL “JET PUMP” SYSTEM
GIANNESCHI Gianneschi’s Ecojet series utilize a bronze self-priming centrifugal “Jet Pump” designed to
provide dependable water supply to multiple fixtures. The “CE” series shown here comes with
ECOJET a pressure regulator that maintains a constant flow at each fixture up to the pump's maximum
capacity. Standard diaphragm pressure switches combined with accumulator tanks are available.
GIANNESCHI Available with or without a pressure regulator.
Model Number Voltage Options Max GPM Max PSI
Ecojet 1 B C. E. 12 and 24 vdc, 230 vac 1 ph 11.7 43
Ecojet 2 B C. E. 24 vdc, 230 vac 1 ph and 3 ph 50/60 hz 14.3 50
Jet 4 B C. E. 24 vdc, 230 vac 1 ph and 3 ph 50/60 hz 20.8 50
Jet 518 B C. E. 24 vdc, 230 vac 1 ph and 3 ph 50/60 hz 26 67
GIANNESCHI CUSTOM SINGLE AND MULTI-PUMP WATER SYSTEMS
Gianneschi water systems are the pump of choice for most European yacht manufacturers.
Systems are assembled to meet each vessel's unique needs, choosing from dc or ac voltage
drives, two pumping principles (liquid ring and centrifugal “Jet Pump” designs) and three
pressure regulating methods (diaphragm actuated pressure switch used in conjunction with
an accumulator tank, constant pressure regulators which often eliminates the need for
an accumulator tank and variable frequency drives with process controllers and pressure
transducers that take advantage of the latest technical advances). Often duplex/tandem pump
packages are created with pre-piped manifolds and isolation valves to provide redundancy,
reserve capacity, or multiple power source capabilities.
Custom Designed Systems
727-446-1656 • 1-800-446-1656 • www.depcopump.com
Page 22 • Catalog 112
WAT E R S Y S T E M S
7 - 16 GPM STAINLESS STEEL SELF-PRIMING WATER SYSTEMS GRUNDFOS
The Grundfos stainless steel JP Series water system utilizes a self-priming centrifugal pump JP Series
with 50 psi automatic pressure switch and a 115/230 vac motor with built-in thermal overload
protection and TEFC enclosure, providing superior protection in the harsh marine environment. GRUNDFOS
Equipped with a convenient priming fill plug, the JPS will retain enough liquid to self-prime
up to 25 feet vertically again and again! An accumulator tank is recommended for the best Scala2
performance and pump life (see pages 25-26).
PEARL
Dimensions
Model GPM at 40 PSI HP Volts Inlet/Outlet (H x W x L)
JP05S-SS 9 ½ 115/230 1" FPT 8" x 10.4" x 16"
JP10S-SS 16 1 115/230 1" FPT 8.5" x 10.4" x 16.8"
12 GPM THERMOPLASTIC SELF-PRIMING WATER SYSTEM
The Scala2 pump from Grundfos is a fully integrated, self-priming, compact all-in-one water pump
system. It provides perfect water pressure at all times (even with multiple taps and showers
running). The Scala2 comes complete with intelligent controller, integrated speed-control
drive, integrated tank, run-dry protection, sensors, and non-return valve. This combination
increases pump performance as demand increases. Thanks to a water-cooled motor, Scala2
offers one of the lowest noise levels on the market.
Dimensions
Model GPM at 40 PSI HP Volts Inlet/Outlet (H x W x L)
12" x 7.6" x 16"
Scala2 12 ¾ 115 1" FPT 12" x 7.6" x 16"
Scala2 12 ¾ 230 1" FPT
UP TO 42 GPM STAINLESS SELF-PRIMING WATER SYSTEM
The Pearl self-priming continuous duty multi-stage centrifugal pump incorporates a 304SS body,
Noryl impellers, carbon/ceramic NBR mechanical seal, and a single or three phase motor. This
pump greatly reduces its operating noise level by incorporating a water-filled shroud around
its impeller stages. To achieve optimal pump performance add a Best Control or Total Control
electronic pressure switch into your installation (see page 26).
Dimensions
Model GPM at 40 PSI HP Volts Inlet/Outlet (H x W x L)
MXA30 15 35 1½ 230 1½" x 1" FPT 9.5" x 8.4" X 19.25"
22 - 40 GPM HORIZONTAL MULTI-STAGE WATER SYSTEM MXA
Calpeda’s MXH horizontal multi-stage series is self-priming and incorporates a 304SS body, CALPEDA
PVC impellers, carbon/ceramic mechanical seal, and a single or three phase motor. This pump
is easy to maintain and the seals can be checked (viewed) through an observation gap on the MXH Series
side. To achieve optimal pump performance add a Best Control or Total Control electronic
pressure switch into your installation (see page 26).
Dimensions
Model GPM at 40 PSI HP Volts Hz Inlet/Outlet (H x W x L)
7.5" x 6.3" x 14"
MXH 20 05 10 ½ 115/230 60 1¼" X 1" FPT 7.5" x 6.3" x 18"
MXH 30 15 37 1½ 230/460 60 1¼" X 1" FPT
www.depcopump.com • 1-800-446-1656 • 727-446-1656
Catalog 112 • Page 23
WAT E R S Y S T E M S
FLOJET/JABSCO/SHURFLO 1.0 - 2.3 GPM “MINI” WATER SYSTEM PUMPS
“Mini” Water Systems These “mini” water system pumps are extremely compact and energy efficient. They are
ideal for low volume intermittent duty applications and are available with or without a
demand pressure switch. All models will self-prime to 6 feet except for the D3131V5011A,
which will self-prime to 8 feet vertically.
Amps at Pressure Dimensions
Model Max GPM Volts 10 PSI Inlet/Outlet Switch (H x W x L)
40 psi 2.66" x 4" x 6.5"
LFP122-202D 1.0 12 vdc 1.9 ⅜" Barb None 2.66" x 4" x 6.5"
LFP122-002D 1 12 vdc 1.9 ⅜" Barb 35 psi 2.66" x 4" x 6.5"
42630-2992-P 1.1 12 vdc 1.9 ⅜" Barb 60 psi 3.63" X 3.25" X 8"
D3131V5011A 1.1 12 vdc 1.6 ⅜" Barb 30 psi 3.75" x 3.25" x 8.2"
02100-740 2.3 24 vdc 1.5 ⅜" FPT and ½" Barb
JABSCO/JOHNSON PUMP 1 GPM WATER SYSTEM PUMP AND FAUCET COMBO
Pump & Faucet Combo The Jabsco PAR-Max 1 and Johnson Pump faucet combinations are “mini” multi-unit water
systems serving 1-2 outlets. The diaphragm style pumps are quiet and easy to install,
self-priming to 6 feet and able to run dry without damage. Both can be mounted on a tank
and are available with our without faucet kit.
Max Fuse Max Description
Model GPM Volts Size PSI Inlet/Outlet Pump with faucet
42630-3992-P 4A 35 ⅜" NPT
42630-2992-P 1 12 vdc 4A 35 ⅜" Barb Pump only
42630-3994-P 1 12 vdc 3A 35 ⅜" NPT Pump with faucet
42630-2994 1 24 vdc 3A 35 ⅜" Barb
61123 1 24 vdc 3A 35 ⅜" Barb Pump only
10-22020-101 1 12 vdc 3A 35 ⅜" Barb Pump with faucet
1 12 vdc
Pump only
WHALE 1.85 - 4.0 GPM HAND AND FOOT OPERATED PUMPS
The foot-operated Gusher® Galley MK3 (model number GP0550B) is a smoothly operating
double-action diaphragm pump that can mount behind or on a bulkhead or directly on the
floor. The Whale GP1309 mounts neatly into the floor and, when not in use, the plunger locks
down flush with the floor.
Model Max GPM Port Size Description
GP1309 1.85 ½" Barb Flush floor mount foot operated pump
GP0550B 4.0 ½" Barb Foot operated “Gusher® Galley MK3”
Manual Water Systems 115 & 230 VAC AND 12 VDC BOTTLED WATER DISPENSER
FLOJET This compact system by Flojet is ideal for automatically supplying bottled water to a
refrigerator ice/water dispenser and/or a water tap. It comes complete with a demand
Bottled Water Dispenser water pump, 20 feet of ¼" discharge tube, a suction tube with universal cap for a 5-gallon
jug, and float switch for automatic shutoff when the bottle is empty. This series has reduced
noise and longer life compared to previous models.
SINGLE INLET VOLTAGE DESCRIPTION
BW5000-000A 115 vac 6 ft cord with plug
BW5001-000A 230 vac 6 ft cord with no plug
BW5005-000A 12 vdc 12" bare leads
DUAL INLET VOLTAGE DESCRIPTION
BW5020A 115 vac 6 ft cord with plug
727-446-1656 • 1-800-446-1656 • www.depcopump.com
Page 24 • Catalog 112
ACCUMULATOR TANKS
2.1 - 8.5 GALLON ACCUMULATOR TANKS JET RITE
The Jet Rite series accumulator tanks have internal air charged bladders that enable pressure
adjustment through their external tire stem type fitting. Three sizes are available. The JR25-
03S also has a mounting platform that saves space by allowing your pump to be placed on
top. Larger sizes are also available. Call us for assistance.
Model Volume Port Accumulator Construction Dimensions
Number (Gallons) Size Type Material (Length x Diameter)
6-01 2.1 ¾" MPT Bladder Painted Galv. Steel 12" x 8"
15-02 4.5 ¾" MPT Bladder Painted Galv. Steel 14.5" x 11"
25-03S 8.5 ¾" MPT Bladder Painted Galv. Steel 18.9" x 12.5"
2 - 20 GALLON ACCUMULATOR TANKS BY GROCO Bladder Accumulators
Groco accumulator tanks are available with a strap or stand mount (see picture). All models GROCO
utilize an adjustable air bladder, are constructed of painted galvanized steel and can be
mounted in any position. The PST-6 comes with a pump stand to allow the mounting of the Bladder Accumulators
PJR or WSG series Groco water systems.
JABSCO
Model Volume 30/50 Dimensions
Number Mounting (Gallons) Drawdown Threads NPT (Length x Diameter) Bladder Accumulators
PST-1 Straps 2 0.5 gallon ¾" NPT 8" X 13" SHURFLO
PST-2 Straps 4.4 1.4 gallons ¾" NPT 11" X 14"
PST-3A Straps 10.3 3.2 gallons ¾" NPT 15" X 19" Bladder Accumulators
PST-4 Straps 14 4.3 gallons ¾" NPT 15" X 24"
PST-5 Straps 20 6.2 gallons ¾" NPT 15" X 32"
PST-6 Feet 5.3 1.7 gallons ¾" NPT 10" X 17"
1⁄6 - 2 GALLON ACCUMULATOR TANKS BY JABSCO
Jabsco accumulator tanks are available in a variety of styles to fit your system’s requirements.
The 30573 series contains an adjustable air bladder and will accept the Jabsco snap-in fittings
found on page 75. It comes with two ½" hose barbs and two ½" Qest threaded fittings. For
larger systems, Jabsco provides the 18810-0000. This two-gallon accumulator tank utilizes
an adjustable air bladder that allows it to be mounted at any angle (a convenient mounting
bracket is included).
Model Volume Port Mounting Construction Accumulator Dimensions
Number (Gallons) Size Position Material Type (Length x Diameter)
30573-0003
30573-0000 1⁄6 ½" Barb Any Plastic Bladder 4.7" X 8.4"
18810-0000 ¼ ½" Barb Any Plastic Bladder 13.5" X 4.75"
2 ¾" MPT Any Painted Galvanized Steel Bladder 12.75" X 8"
¼ - 2 GALLON ACCUMULATOR TANKS BY SHURFLO
Shurflo’s accumulator tanks are available in two very different configurations. Shurflo’s model
182-200 is a ¼ gallon nylon tank that is capable of operating at any angle and is equipped
with an adjustable air bladder, mounting bracket, and ½" fpt ports. Shurflo’s model 3400-
002 is a two-gallon stainless steel accumulator tank which will also operate in any mounting
position and comes equipped with a convenient pump mounting bracket, adjustable air
bladder, stainless mounting feet, and ¾" mpt ports.
Model Volume Port Mounting Construction Accumulator Dimensions
Number (Gallons) Size Position Material Type (Length x Diameter)
182-200 ¼ ½" FPT Any Nylon Bladder 8.75" x 3.75"
3400-002 2 ¾" MPT Any Stainless Steel Bladder 12" x 9"
www.depcopump.com • 1-800-446-1656 • 727-446-1656
Catalog 112 • Page 25
A C C U M U L ATO R TA N K S & C O N T R O L L E R S
GOULDS WATER TECH 2 - 116 GALLON ACCUMULATOR TANKS
Accumulator Tanks Gould’s HydroPro water system tanks are available in 26 different models. Model types in-
clude stand, mounted pump, buried, in-line and horizontal with bracket. The efficient design
FLOTEC reduces pump on/off cycles, resulting in longer motor and switch life and reducing power
costs. Rugged, impact-resistant exterior coating and steel inner shell ensures long life. New
Bladder Accumulators diaphragm design has improved diaphragm life by reducing abrasive wear.
PEARL Tank Series Volume Range Max Drawdown Connection
Stand models 13.9-115.9 gallons 8.4-70.5 gallons 1" or 1¼" FPT
Mounted pump models 13.9-19.9 gallons 8.4-12.1 gallons ¾" MPT
Buried models 19.9-45.2 gallons 12.1-27.3 gallons
In-line models 1.9-13.9 gallons 1.3-8.4 gallons 1" or 1¼" MPT
Horizontal w/bracket models 8.2-19.9 gallons 3.1-12.1 gallons ¾" or 1" MPT
¾" MPT or 1" MPT/FPT
6 - 82 GALLON ACCUMULATOR TANKS
Flotec’s pre-charged bladder accumulator tanks require 50% less space than conventional
tanks while providing greater water capacity between pump cycles. The 6 and 15 gallon
sizes come with a bottom mount ¾" mpt fitting while the 42 and 82 gallon sizes have
mounting feet, a top jet pump mounting plate and 1" or 1¼" mpt bottom fitting respectively.
Model Rated Size Actual Capacity Port Construction Tank
Number (Gallons) (Gallons) Size Material Height
FP7105 6 2 ¾" Heavy Gauge Painted Steel 13"
FP7100 15 6 ¾" Heavy Gauge Painted Steel 14"
FP7110 42 19 1" Heavy Gauge Painted Steel 21"
FP7120 82 35 1¼" Heavy Gauge Painted Steel 32"
FP7100H 16 6 ¾" Heavy Gauge Painted Steel 32"
ELECTRONIC FLOW CONTROL SWITCH, MAX PRESSURE 145 PSI
The Best Control is an electronic pump controller from Pearl that starts and stops the water
system pump according to the user’s needs. It monitors the water pressure and flow rate
(or lack thereof) as liquid flows through its body, thus protecting the pump against over
pressurization and running dry. The Best Control enables the pump to provide a smooth
even flow and eliminates the need for a pressure tank. Each unit comes complete with a
built-in check valve.
Model Number Voltage Temp Range Connection Max Work Min Work
Pressure Pressure
PCB16F16S-22 115/230 vac 32°-149° 1" NPT 145 psi 22 psi
Best Control ELECTRONIC FLOW CONTROL SWITCH, MAX PRESSURE 174 PSI
PEARL Pearl’s Total Control electronic flow switch includes features not found on its sister unit,
the Best Control switch. These features include a built-in pressure reducing valve (which
helps control water hammer), adjustable downstream discharge pressure, integral check
valve and the ability to maintain constant flow and pressure.
Model Number Voltage Temp Range Connection Max Work Min Work
Pressure Pressure
PCTC16F16S 115/230 vac 32°-149° 1¼" NPT 174 psi 45 psi
Total Control
727-446-1656 • 1-800-446-1656 • www.depcopump.com
Page 26 • Catalog 112
WASHDOWN AND LIVEWELL
High Pressure Washdown.................28-30,111,112
Low Pressure Washdown................. 32-34,100-110
Ballast Pumps.......................................... 31
Clutch Drive.....................................30,48,84
Dockside Baitwell................................. 30,102
Engine Driven.......................................... 102
Hose Coils............................................... 35
Hydraulic Drive......................... 30,32,48,85,102
Panel Switches......................................... 35
Thru-Hull Mount........................................ 33
Fishbox Evacuation.................................33,34
Washdown Nozzle...................................... 35
Accessories. ......................................... 35,36
Ampco.................................................. 108
AMT..................................................... 103
Burks.................................................... 100
Cat....................................................... 30
Finish Thompson...................................... 110
Flojet.................................................28,36
Gianneschi.......................................... 30,111
Goulds G & L........................................... 109
Groco................................................. 29,32
Jabsco................................................28-36
Johnson Pump............................28,30,31,34-36
March................................................... 4,5
Marco................................................. 29,36
MP....................................30,32,48,85,101,107
MTH..................................................... 112
Oberdorfer............................ 30,32,100,103-105
Pacer................................................ 30,102
Price............................................... 106,110
Primetime.......................................... 32,100
Rule...................................................33,35
Scot..................................................... 7,11
Sherwood. ........................................... 32,36
Shurflo........................................ 28,31,34-36
Whale.................................................... 29
www.depcopump.com • 1-800-446-1656 • 727-446-1656
Catalog 112 • Page 27
WASHDOWN AND LIVEWELL
JABSCO 4 & 5 GPM, 50 PSI JABSCO WASHDOWN/LIVEWELL PUMPS
Washdown/Livewell Choose from Jabsco’s 32700 series with an impressive 60 psi max pressure or their 32605
series with 50 psi max pressure. These pumps feature a low amperage motor with special
FLOJET waterproof coating and sealed pressure switch offering maximum corrosion protection in
harsh marine environments. This series is self-priming to 10 feet and is suitable for dual
Washdown washdown/baitwell duty. See page 173 for service parts.
JOHNSON PUMP Model Max Amps at: Dimensions
Number GPM Volts 10 PSI 40 PSI Inlet/Outlet (H x W x L)
32605-0092 4.30″ x 3.56″ x 9″
32605-0094 4 12 vdc 5 9 ½″ MPT and ¾″ Barb 4.30″ x 3.56″ x 9″
32700-0092 4 24 vdc 3 6 ½″ MPT and ¾″ Barb 3.5″ x 4.29″ x 7.73″
5 12 vdc 7 11 ½″ MPT and ¾″ Barb
3.5 & 4.5 GPM, 40 PSI FLOJET WASHDOWN PUMPS
The Flojet automatic high velocity deck and anchor washdown pump self-primes to 10 feet
and delivers up to 4.5 gpm at 40 psi. Models with the “L” suffix include a state of the art
washdown nozzle with swivel disconnect check valve. See page 177 for service parts.
Model Max Amps at Includes Dimensions
Number GPM Volts 10 PSI Inlet/Outlet Nozzle (H x W x L)
04325-143 4.5 12 vdc 3.75" x 6.3" x 10"
04325-143L 4.5 12 vdc 6.0 ¾" Barb and ¾" GHT No 3.75" x 6.3" x 10"
04325-343 4.5 24 vdc 6.0 ¾" Barb and ¾" GHT Yes 3.75" x 6.3" x 10"
04325-443 4.5 32 vdc 2.5 ¾" Barb and ¾" GHT No 3.75" x 6.3" x 10"
04305-144 3.5 12 vdc 2.0 ¾" Barb and ¾" GHT No 3.75" x 6.3" x 8.6"
04305-144L 3.5 12 vdc 5.0 ¾" Barb and ¾" GHT No 3.75" x 6.3" x 8.6"
5.0 ¾" Barb and ¾" GHT Yes
3.5 & 5.2 GPM, 70 PSI JOHNSON WASHDOWN PUMPS
The “Aqua Jet” 5 chambered diaphragm pumps by Johnson Pump deliver up to 5.2 gpm
and 70 psi. They will prime up to 10 feet and come complete with an intake strainer, spray
nozzle and ½" barbed fittings.
Model Number Max GPM Volts Fuse Size Inlet/Outlet Dimensions (H x W x L)
10-13399-03 3.5 12 vdc 10 ½" MPT and ¾" Barb 4.57" x 8.25" x 9.31"
10-13399-04 3.5 24 vdc 5 ½" MPT and ¾" Barb 4.57" x 8.25" x 9.31"
10-13407-07 5.2 12 vdc 20 ½" MPT and ¾" Barb 4.33" x 8.43" x 9.46"
10-13407-08 5.2 24 vdc 10 ½" MPT and ¾" Barb 4.33" x 8.43" x 9.46"
Aqua Jet 3.5 & 5 GPM, 45 & 60 PSI “BLASTER” WASHDOWN PUMPS
SHURFLO The “BlasterTM” and “ProblasterTM” 4 chamber diagram pumps by Shurflo deliver up to 4.0
gpm and 60 psi. For more flow, there is the “ProblasterTM II Ultimate” that delivers up to 5
Blaster and ProBlaster gpm and 60 psi. The “Blaster” pump series is constructed with a corrosion-resistant coated
seamless motor shell and sealed switch to provide protection against harsh marine environ-
ments. All models will lift up to 6 feet vertically and include two straight ¾” hose barb swivel
fittings and a male garden hose adapter. See page 177 for service parts.
Model Number Max GPM Volts Fuse Size Max PSI Inlet/Outlet Dimensions (H x W x L)
45 ½" MPT and ¾" Barb 4.14" x 4.92" x 9"
4238-121-E07 3.5 12 vdc 10 45 ½" MPT and ¾" Barb 4.14" x 4.92" x 9"
4238-141-E07 3.5 24 vdc 5 60 ½" MPT and ¾" Barb 4.82" x 4.92" x 10"
4248-153-E09 4.0 12 vdc 15 60 ½" MPT and ¾" Barb 4.82" x 4.92" x 10"
4248-163-E09 4.0 24 vdc 7.5 60 ½" MPT and ¾" Barb 4.82" x 4.92" x 10"
4258-153-E09 5.0 12 vdc 20 60 ½" MPT and ¾" Barb 4.82" x 4.92" x 10"
4258-163-E09 5.0 24 vdc 10
727-446-1656 • 1-800-446-1656 • www.depcopump.com
Page 28 • Catalog 112
WA S H D O W N P U M P S
4 - 6 GPM, UP TO 70 PSI JABSCO WASHDOWN PUMPS JABSCO
Choose from Jabsco’s new Hotshot HD series with up to 70 psi max pressure. These pumps Hot Shot
feature heavy-duty motors with a plastic housing to protect from corrosion. The integrated
and sealed pressure switch allows for on-demand operation. Pumps can run dry without MARCO
damage. All models will self-priming to 7 feet and include a trigger nozzle, two quick con-
nect ports and vibration dampening mounting feet. Deck Wash
Model Volts Max Max Fuse Inlet/Outlet Dimensions Hose WHALE
GPM PSI Size (H x W x L) Included
Q401J-118N-4A 12 vdc 4 60 20 ½" and ¾" Barb, ¾" GHT 3.8" x 4.1' x 9.4" Yes
Q402J-118N-3A 24 vdc 4 60 10 ½" and ¾" Barb, ¾" GHT 3.8" x 4.1' x 9.4" No
P601J-219N-4A 12 vdc 6 70 25 ¾" Barb, ¾" GHT 4.7" x 5.1" x 10.2" Yes
P602J-219N-3A 24 vdc 6 70 15 ¾" Barb, ¾" GHT 4.7" x 5.1" x 10.2" No
3.2 - 4 GPM, UP TO 72 PSI, MARCO DECK WASHING PUMPS
Marco’s deck washing pumps utilize helical PTFE gears within a nickel plated brass body to
deliver a smooth dependable flow. Equipped with an in-line filter, check valve, discharge
nozzle, 32 foot coil hose, and electronic controls, this series is ready for service in either 12
vdc or 24 vdc installations. All models will prime up to 5 feet vertically while the DP12/E
will prime up to 12 feet!
Part Model Max Volts Max Amps Max Inlet/Outlet Dimensions
Number Number GPM Size PSI (H x W x L)
DP9/E M164-821-15 65.3 ⅜" NPT 4" x 7.4" x 8.8
DP3/E M164-801-15 3.2 12 or 24 vdc 15 43.5 ⅜" NPT 4" x 7.4" x 6.8"
DP12/E M164-841-15 3.7 12 or 24 vdc 15 72.5 ⅜" NPT 4.25" x 7.6" x 9.5"
4.0 12 or 24 vdc 25
4.8 GPM, UP TO 45 PSI, WHALE WASHDOWN PUMP
Whale’s high-pressure diaphragm washdown pump utilizes an internal pressure switch isolating
its electronics from the corrosive marine environment, thus extending pump life. A universal
mounting system eases installations and it’s 10 foot priming capability provides greater
flexibility in pump placement. This series is available with or without a discharge nozzle.
Model Number Max GPM Volts Fuse Size Max PSI Inlet/Outlet Dimensions (H x W x L)
UF1815 4.8 12 vdc 12 45 ¾" MPT 5" x 9" x 9.5"
UF1825 4.8 24 vdc 8 45 ¾" MPT 5" x 9" x 9.5"
6 - 11 GPM, UP TO 50 PSI, GROCO WASHDOWN PUMPS UF Series
The Groco C-60 series utilizes the dependable vane principle to deliver a smooth, high-pressure GROCO
flow of salt or fresh water. Each pump comes with a 40 psi waterproof pressure switch, check
valve, and washdown nozzle. The Groco PJRW and PSRW washdown pumps take advantage Washdown
of the high-pressure lobe design of the popular Paragon water system pump series to deliver
up to 11 gpm and up to 50 psi. This series is typically controlled with a foot or panel switch.
It does not come with a demand pressure switch. (Use the Paragon series on page 21 for
applications where a pressure switch is desired.) See page 181 for service parts.
Model Max Max Fuse Dimensions
Number GPM Volts PSI Size Inlet Outlet (H x W x L)
C-60 12V 3.9" x 10" x 8"
C-60 24V 6.5 12 vdc 40 30 ½" FPT or ¾" GHT ¾" FPT 3.9" x 10" x 8"
PJRW 12V 6.5 24 vdc 40 20 ½" FPT or ¾" GHT ¾" FPT 4.5" x 8.25" x 8.5"
PSRW 12V 7.0 12 vdc 50 30 ¾" FPT ¾" FPT 8.25" x 5.5" x 8.5"
11 12 vdc 50 50 ¾" FPT ¾" FPT
www.depcopump.com • 1-800-446-1656 • 727-446-1656
Catalog 112 • Page 29
WA S H D O W N A N D L I V E W E L L
GIANNESCHI UP TO 26 GPM, UP TO 75 PSI, AC & DC SELF-PRIMING LIVEWELL PUMP
Bronze 24 vdc or 110 vac Gianneschi’s bronze CP series utilizes the durable liquid ring pumping principle which enables
priming up to 26 feet! Designed for fresh or salt water environments, this series comes
PACER standard with a stainless steel shaft and long-lasting mechanical seal. Available in 24 vdc and
110 vac, Gianneschi’s CP series will deliver up to 26 gpm with a max discharge pressure of 75'.
Dockside Livewell
Model GPM at Feet of Head Max
CLUTCH Number Volts Hz HP 10' 20' 30' 40' Head
Electric or Manual CP26A1 110 vac 60 ½ 9.5 17 12 10 55'
CP26A1 24 vdc 60 ¼ 15 12 9 5 39'
HYDRAULIC CP26A2 24 vdc 60 ½ 16 13 10 8 54'
CP30A1 24 vdc 60 ¾ 23 20 15 12 65'
Bronze, Cast Iron or Plastic CP30A2 110 vac 60 1 24 20 18 15 75'
AC SELF-PRIMING DOCKSIDE LIVEWELL PUMP
After the initial prime, these continuous duty Pacer pumps will lift up to 15 feet vertically
and will remain primed even after shutdown. They are ideal for dockside livewells or fishing
pier bait houses. Each pump comes equipped with a basket strainer and a non-clogging open
impeller/shaft sleeve combination which isolates the motor shaft from the liquid. These
pumps come standard with 115/230 vac motors, (3 phase, TEFC, 50 hertz, and explosion-
proof motors are also available). The inlet and outlet of all models are internally threaded
1½" npt and externally threaded 2" npt.
Model Volts Hz HP GPM at Feet of Head Max
Number AC 10' 20' 30' 40' Head
GNOK1 ½ / 2A-10J36BC 115/230 60 ½ 60 51 38 17
GNOK1 ½ / 2C-10N36BC 115/230 60 1 78 71 60 48 45'
GNOK1 ½ / 2E-10W36BC 115/230 60 2 110 105 99 88 60'
74'
MANUAL OR ELECTRIC CLUTCH PUMPS
Clutch pumps allow you to utilize the power of your engine to intermittently drive a washdown,
bilge or livewell pump. They are available in a wide variety of sizes and types (see pages 48
and 84). Jabsco and Johnson manufacture manual or electrically actuated flexible impeller
pumps with capacities to 83 gallons per minute and 30 psi. MP Flomax manufactures a series
of electric or manually actuated high volume centrifugal pumps that will reach up to 320
gallons per minute at open flow. Gianneschi liquid ring pumps come in three different sizes
that will deliver up to 143 gallons per minute at 79 psi.
Pump Type Brands Max GPM Max PSI Pages
Flexible Impeller Jabsco, Johnson, Oberdorfer 83 30 48, 84
Centrifugal 320 40
Plunger MP Flomax 7.5 3500 48
Liquid Ring CAT 143 79 Call
84
Gianneschi
HYDRAULIC DRIVE PUMPS FOR WASHDOWN OR LIVEWELL
Use your existing hydraulic system to power your pump. Below are a few of the standard
pumps available. Depco can mount hydraulic motors to flexible impeller pumps, gear pumps,
centrifugal pumps etc…whatever is required to deliver the performance you desire. The MP
pumps are available in bronze or cast iron while the Pacer models are corrosion resistant
thermoplastic. See pages 171 and 182 for service parts.
Model Brand Port GPM at TDH Max Hydraulic Fluid Required
Number MP Flomax Size 25' 50' 100' Head For Max Flow and Head
FM5 MP Flomax 1½" 130'
FM8 MP Flomax 2" 150 150 70 130' 6.5 gpm / 1800 psi
FM10 MP Flomax 2" 170 150 70 190' 6.5 gpm / 1800 psi
FM15 3" 200 200 200 180' 15 gpm / 1800 psi
SE 1-½ EB Pacer 1½" 315 315 240 15 gpm / 1800 psi
SE 2 BL Pacer 2" 90 50 – 70'
SE 3 BL Pacer 3" 210 185 100 120' 9 gpm / 500 psi
260 190 – 85' 9.5 gpm / 1550 psi
9.2 gpm / 1200 psi
727-446-1656 • 1-800-446-1656 • www.depcopump.com
Page 30 • Catalog 112
BALLAST PUMPS
JABSCO WAKEBOARD AND SKI BOAT BALLAST PUMP JABSCO
Jabsco now offers two wakeboard and ski boat water ballasting pumps that can both fill and Ballast Pump
empty wakeboard and water ski ballasts in minutes. The Ballast Puppy (18220-1127) delivers
72 pounds (9 gallons) of water per minute and the Ballast King (22610-9507) can deliver an JOHNSON PUMP
amazing 125 pounds (15 gallons) of ballast water per minute! They are self-priming, will not
air-lock, and are reversible to both fill and empty a ballast tank. The impeller (6303-0007-P)
is specially designed to reduce the motor load when changing flow direction. These pumps
also feature an exclusive (patent pending) run-dry protection.
Model Number Max GPM Volts Fuse Size Inlet/Outlet Dimensions(H x W x L)
18220-1127 9 gpm 12 vdc 20 ½" FPT/1" Barb 3⅝" x 4¾" x 7⅛"
22610-9507 15 gpm 12 vdc 25 ½" FPT/1" Barb 4" x 4¾" x 8"
JOHNSON PUMP TALULAH BALLAST PUMP
The Johnson Pump Talulah Ballast pump is designed to quickly fill or, when reversed, drain
a ballast tank at a rate of more than 13.5 gpm. Capable of pumping fresh or sea water, the
pump’s robust reversible design is self-priming and comes equipped with a totally enclosed
motor with built-in thermal overload and run dry protection. Replacement polyurethane
impeller - 09-824P-2.
Model Number Max GPM Volts Fuse Size Inlet/Outlet Dimensions (H x W x L)
10-24690-18 13.5 12 vdc 25 ½" NPT/1" Barb 3⅝" x 4¾" x 8"
JOHNSON PUMP TALULAH HF 30 GPM BALLAST PUMP Ballast Pump
Johnson Pump’s NEW Talulah HF Ballast Pump delivers up to 30 gpm making it the most JOHNSON PUMP
powerful ballast pump in the market! Capable of retrofitting most other models, the
Talulah HF will pump fresh or sea water and includes a thermal overload sensor and dry
run protection that will automatically shut the pump down to prevent run-dry damage or
motor overheating.
Model Number Max GPM Volts Amp Draw Amp Draw Fuse Size Inlet/Outlet Dimensions
@ Pumping @ Dry Run (H x W x L)
4" x 6" x 11"
10-24939-18 30 12 25 up to 45 50 1 1/2"
SHURFLO STANDARD AND HIGH FLOW BALLAST PUMPS Talulah HF Ballast Pump
The Shurflo Standard and High Flow ballast pumps were specifically designed for ballast tank SHURFLO
applications in ski and wake boats, providing rapid fill and drain rates in a readily adaptable
configuration. The high-efficiency high-torque motor in combination with a high-modulus Ballast Pump
neoprene compound impeller provides fast priming, long life, and consistent performance.
Model Number Max GPM Volts Fuse Size Inlet/Outlet Dimensions (H x W x L)
3300-101 12 gpm 12 vdc 25 ½" FPT/1" Barb 3⅝" x 4¾" x 6⅝"
3300-001 15 gpm 12 vdc 25 ½" FPT/1" Barb 3⅝" x 4¾" x 7 11/16"
www.depcopump.com • 1-800-446-1656 • 727-446-1656
Catalog 112 • Page 31
LIVEWELL AND LOW PRESSURE WASHDOWN
PRIMETIME ¾" 316SS SELF-PRIMER IN AC AND DC OR HYDRAULIC DRIVE
Stainless Steel Self-Primer The Primetime self-priming pump will not air-lock! It will lift water up to 6 feet and is
ideal for installations prone to air-lock. This rugged cast 316 stainless steel pump comes
MP/OBERDORFER equipped with a carbon/ceramic mechanical seal, ¾" x ¾" fpt ports and a 316 stainless
steel impeller. The 115 vac version comes with a 6' cord and plug. Dimensionally compact,
316SS and Bronze the 115 and 230 vac version dimensions are only 9½" x 5" x 7".
GROCO Model Additional Port GPM at Feet of Head Max
Number Description Size 10' 15' 20' Head
Primetime 115v @ 60 hz ¾" FPT 21 16 10.5 23
Primetime 230v @ 60 hz ¾" FPT 21 16 10.5 23
Primetime 230v @ 50 hz ¾" FPT 13.5 7 18
Primetime 12 vdc ¾" FPT 17.5 11.5 0 23
Primetime 24 vdc ¾" FPT 13 7.5 5.5 19
Hyd-PT ¾" FPT 31 28 0 51
25
*Hydraulic performance varies by hydraulic oil flow and pressure.
¾" 316SS AND BRONZE RECIRCULATORS IN AC AND DC
Oberdorfer and MP recirculators require flooded suction and are available in ac and dc volt-
ages. The MP series is 316 stainless steel and comes standard with a Viton® mechanical seal.
The Oberdorfer series is constructed of bronze and comes with a Buna lip or mechanical
seal. See page 170 for Oberdofer service parts.
Model Brand GPM at Feet of Head Max Seal
Number Oberdorfer Volts Hz 0' 5' 10' Head Type
172B-B26 Oberdorfer 115 vac Mechanical
172B-B27 Oberdorfer 230 vac 50/60 18 15 10 14' Mechanical
172B-Series Oberdorfer 12, 24 or 32 vdc 50/60 18 15 10 14' Mechanical
170M-Series 12, 24 or 32 vdc 20 14 6 14' Lip
CFX50 MP 12, 24 vdc / 115, 230 vac 20 14 6 14' Mechanical
CFX75 MP 12, 24 vdc / 115, 230 vac 13.5 11 8 28' Mechanical
60 28 25 22 16"
60
*Reduced flow will be experienced at 50 hz operation.
¾" SPLASH PROOF RECIRCULATORS IN 12 AND 24 VDC
This unique pump series adds a submersible motor boot to Groco’s successful flanged suction
bronze recirculation pump line, creating a waterproof recirculator for wet or submerged
environments. Groco's original recirculators are also available with their continuous duty
non-submersible motors (listed below). All models come standard with a mechanical seal.
Model Volts Motor GPM at Feet of Head Duty Dimensions
Number DC Enclosure 0' 5' 10' (H x W x L)
Cont.
CP-20 12 or 24 vdc Non-Submersible 17 11.7 7.3 Int. 3.5" x 4.5" x 7.91"
CP-20-S 12 or 24 vdc Submersible 17 11.7 7.3 4.3" x 4.6" x 9.6"
Submersible or Open-Air ¾" STAINLESS STEEL RECIRCULATORS IN 12 AND 24 VDC
CYCLONE/AQUA TIGER These stainless centrifugals combine the corrosion resistance of a stainless steel housing
and the long service life of a mechanical seal. Jabsco’s Cyclone pump series has three
Jabsco/Sherwood variations: high flow (50840 series), high pressure (50860 series) and continuous duty
(50850-series) with npt ports. See page 169 for Jabsco service parts.
Model Volts Fuse GPM at Feet of Head Max Dimensions
Number DC Size 0' 10' 25' Head (H x W x L)
COMSV012D 12 10.5 20 15.5 - 21' 4½" x 4½" x 7⅜"
COMSV024D 24 7.8 20 15.5 - 21' 4½" x 4½" x 7⅜"
50840-0012 12 10 29 15 - 20' 5" x 6½" x 6"
50840-0024 24 7 29 15 - 20' 5" x 6½" x 6"
50860-0012 12 25 21.1 18.5 12 43.5' 5" x 4½" x 9"
50860-0024 24 13 21.1 18.5 12 43.5' 5" x 4½" x 9"
50850-0012 12 5.2 13.7 5.5 - 20' 4¼" x 3½" x 6¼"
727-446-1656 • 1-800-446-1656 • www.depcopump.com
Page 32 • Catalog 112
LIVEWELL AND LOW PRESSURE WASHDOWN
12 VDC DUAL PORT FOR WASHDOWN PUMP ATTACHMENT RULE
Rule utilizes their proven direct drive design to provide a series of dependable and eco-
nomical dual-port livewell pumps. The Rule Tournament series includes a separate ½" fpt
port that allows the user to attach a washdown pump. A removable motor cartridge gives
easy access to the impeller for cleaning or maintenance allowing fittings and hoses to re-
main in place.
Model Replacement Motor Fuse Size
Number GPH Cartridge Suction/Discarge 2.5
45DR ¾" MPT/ ¾" Barb 5
401FC 500 46DR ¾" MPT/ ¾" Barb 6
403FC 800 47DR ¾" MPT / 1⅛" Barb
405FC 1100
12 VDC THRU-HULL MOUNTED LIVEWELL PUMPS Dual Port Livewell Pump
Rule pumps are available in straight or angled thru-hull mounting to fit in the tightest RULE
bilge. Both mounting types are available in Rule’s original or replaceable cartridge type
configuration. The cartridge series allows for quick motor replacement without disturbing
the thru-hull mounting.
Model Number Thru-Hull GPH Replacement Suction/Discharge Fuse
Angle Motor Cartridge Size
401C Angled 500 45DR ¾" MPT / ¾" Barb 2.5
401STC 2.5
403C Straight 500 45DR ¾" MPT / ¾" Barb 5
403STC 5
405C Angled 800 46DR ¾" MPT / ¾" Barb 6
405STC 6
Straight 800 46DR ¾" MPT / ¾" Barb
Angled 1000 47DR ¾" MPT / 1⅛" Barb
Straight 1100 47DR ¾" MPT/ 1⅛" Barb Thru-Hull Livewell Pumps
12 - 32 VDC HIGH CAPACITY BAITWELL/WASHDOWN PUMPS RULE
These Rule pumps offer high flow for large baitwells, commercial livewells, and low-pressure
washdown applications. The 209 series mounts directly on a thru-hull with its 1" mpt suction
port. The 209B model features a bronze base, anti-airlock feature, and a heavy-duty long-life
motor. The 17A - 19A series utilizes 1½" slip-on ports to connect into your system.
Model Number Volts GPH Suction/Discharge Amp Draw 209B 17A
17A 12 vdc 3800 1½" Barb / 1½" Barb 15.5
18A 24 vdc 3700 1½" Barb / 1½" Barb 6.9
19A 32 vdc 3700 1½" Barb / 1½" Barb 5.0
209B 12 vdc 1600 1" MPT / 1⅛" Barb 4.8
209FDP 12 vdc 1600 1" MPT / 1⅛" Barb 4.8
High Capacity Pumps
12 AND 24 VDC FISH BOX EVACUATION PUMP JABSCO
Jabsco’s fish box evacuation pump is perfect for emptying a fish box, easily passing debris
such as bait residue, particles of ice, and fish scales that are often left after a day of fishing.
These pumps will run dry without damage, lift up to 10’ and come standard with a 360
degree rotatable head, allowing it to be mounted in almost any position!
Model Number Volts Max Max Inlet/Outlet Dimensions Amp
GPM Head (H x W x L) Draw
50900-1000 12 vdc 1½" Barb x 1½" Barb
50900-1100 24 vdc 5 10' 1½" Barb x 1½" Barb 5.2" x 6.3" x 10.8" 15
5 10' 5.2" x 6.3" x 10.8" 7
Fish Box Evacuation Pump
www.depcopump.com • 1-800-446-1656 • 727-446-1656
Catalog 112 • Page 33
LIVEWELL AND LOW PRESSURE WASHDOWN
SHURFLO 600-2000 GPH LIVEWELL WITH PORT FOR WASHDOWN PUMP ATTACHMENT
Piranha and Heavy Duty All PIRANHA™ series livewell pumps have a removable cartridge for easy cleaning. The patented
anti-airlock feature allows the pump to clear trapped air in rough water or when the boat is
SHURFLO anchored. The dual port fitting allows for easy washdown pump connections. The 1500 and
2000 gph models are heavy duty and rated for continuous duty.
Bait Sentry
Model Description Max GPH Volts Fuse Replacement Motor Inlet/Outlet
SHURFLO Number Size Cartridge
Piranha 600 12 vdc ¾" MPT / ¾" Barb
357-013-10 Piranha 800 12 vdc 4 94-619-00 ¾" MPT / ¾" Barb
357-113-10 Piranha 1100 12 vdc 6 94-620-00 ¾" MPT / 1⅛" Barb
357-103-10 High Flow 1500 12 vdc 6 94-620-00 1" MPT / 1⅛" Barb
358-001-10 High Flow 1500 24 vdc 10 n/a 1" MPT / 1⅛" Barb
358-101-10 High Flow 2000 12 vdc 6 n/a 1" MPT / 1⅛" Barb
358-011-10 High Flow 2000 24 vdc 15 n/a 1" MPT / 1⅛" Barb
358-111-10 8 n/a
MAGNETIC DRIVE LIVEWELL WITH WASHDOWN PUMP ATTACHMENT
BAIT SENTRY™ is designed with a unique magnetically-driven impeller. The magnetic drive
advantage allows the pump to ingest large amounts of debris without damage to the motor.
Motors are continuous duty and ignition protected. Anti-airlock feature will clear trapped air
even in rough water. All BAIT SENTRY™ pumps include a dual port to make an easy washdown
pump connection.
Model Number Volts Fuse Inlet/Outlet Dimensions
Size Max GPH (HxW)
1700-001-030 12 vdc ¾" MPT / ¾" Barb
1700-011-030 12 vdc 2 500 ¾" MPT / ¾" Barb 7.82" x 4.93"
1700-021-030 12 vdc 5 800 ¾" MPT / 1⅛" Barb 7.82" x 4.93"
6 1100 7.82" x 4.93"
4.0 GPM, 45 PSI SHURFLO WASHDOWN & LIVEWELL PUMPS
The Shurflo “Pro Baitmaster™” is excellent for livewell or washdown applications in harsh marine
environments. Its seamless motor shell and sealed demand switch protect the pump from splashed
liquids. Each pump will run dry without damage, self-priming to 6 feet and rated for continuous
duty. See page 177 for service parts.
Model Number Max Volts Fuse Max Inlet/Outlet Dimensions
GPM Size PSI (H x W x L)
4648-153-E07 12 vdc ½" MPT and ¾" Barb
4648-163-E07 4 24 vdc 15 45 ½" MPT and ¾" Barb 4.77" x 4.92" x 10.0"
4 7.5 45 4.77" x 4.92" x 10.0"
Pro Baitmaster 12 AND 24 VDC, 115 VAC FISHBOX EVACUATION PUMP
FISHBOX EVACUATION Macerator pumps are designed for sanitation waste and fish box evacuation. They will grind
the waste into small particles that can easily pass through the pumps 1" discharge port. For
Jabsco/Johnson/Shurflo more information on macerator pumps see pages 62 and 63.
Model Fuse Max Dimensions
Brand Number Volts Size GPM Inlet Port Outlet Port (H x W x L)
Jabsco 18590-2092 12 vdc 20 12 1½" MPT / 1½" Barb 1" Barb 3½" x 411⁄16" x 119⁄16"
Jabsco 18590-2094 24 vdc 15 12 1½" MPT / 1½" Barb 1" Barb 3½" x 411⁄16" x 119⁄16"
Johnson 10-24453-01 12 vdc 20 10 1½" MPT / 1½" Barb 1" Barb 31⁄3" x 4¼" x 10"
Johnson 10-24453-02 24 vdc 12 10 1½" MPT / 1½" Barb 1" Barb 31⁄3" x 4¼" x 10"
Shurflo 3200-001 12 vdc 25 13 1½" MPT / 1½" Barb 1" Barb 3⅞" x 4½" x 10¾"
Shurflo 3200-011 24 vdc 15 13 1½" MPT / 1½" Barb 1" Barb 3⅞" x 4½" x 10¾"
Jabsco 18690-0000 115 vac 5 14 1½" MPT / 1½" Barb 1" Barb
8" x 71⁄5" x 12½"
727-446-1656 • 1-800-446-1656 • www.depcopump.com
Page 34 • Catalog 112
ACCESSORIES
HIGH PRESSURE SALT WATER WASHDOWN NOZZLE JET STREAM NOZZLE
Most nozzles last only three months in the marine environment. The Jet Stream is guaranteed
to last a minimum of 1 year! It is a true salt water rated gun with stainless spring, swivel
head, quick release hose attachment, locking trigger, built-in check valve, ¾" ght inlet port,
and protected water channel.
Model Number Description
Nozzle Kit Jet Stream nozzle with quick connect swivel check valve
Connector Extra check valve connector
Swivel, Quick Release, Check Valve
25' POLYURETHANE HOSE COIL JOHNSON/SHURFLO
These washdown hoses are constructed of medium/heavy duty polyurethane which is
durable and lightweight. The hoses feature 4" coil and deliver a powerful stream of water
for all your washdown needs. The hoses can stow away when not in use and are available
in black, white, or blue.
Brand Part Number Description
Johnson Pump 10615-00 25' black hose coil
Shurflo 7-071-25 25' white hose coil
Shurflo 7-137-25 25' blue hose coil
RULE AND JOHNSON PUMP PANEL SWITCHES Hose Coils
Rule and Johnson Pump water-resistant panel switches come with a variety of optional PANEL SWITCHES
features from indicator lights to a rocker switch. Manual-off-automatic settings are standard
on all the switches listed below.
Model Volts Fuse Description Dimensions
Brand Number DC Size Lighted 3 way switch (Height x Width)
Rule 12 20 Lighted 3 way switch
Rule 41 24/32 10/6.5 Lighted 3 way rocker switch 3¼" x 2.0"
Rule 42 12 20 Lighted 3 way rocker switch 3¼" x 2.0"
Rule 43 24 10 2⅞" x 2⅜"
Rule 44 12/24/32 20/10/6.5 3 way switch 2⅞" x 2⅜"
Johnson 45 12 10 2 way on/off switch 2¼" x 2.0 "
82024 2⅞" X 2⅜"
FITTINGS BY RULE, JABSCO AND JOHNSON PUMP LIVEWELL ACCESSORIES
These quick connect thru-hull fittings will make cleanups quicker and easier. The high impact
plastic and stainless steel fittings will not rust, corrode or discolor.
Brand Model Number Port Size Description
Jabsco 31911-0000 ½" SS Deck connector for washdown
Jabsco 31911-0002 ¾" Hose fitting adapter
Jabsco 31911-0003 ¾" SS Deck fitting service kit
Johnson 61121 ¾" Single outlet, single flush
Johnson 61122 ¾" Double outlet, 2 way flush
Rule 61S ¾" Barb Plastic (elbow style 61)
Rule 60 1⅛" Barb Plastic construction
Rule 59 1½" Barb Plastic construction
www.depcopump.com • 1-800-446-1656 • 727-446-1656
Catalog 112 • Page 35
ACCESSORIES
IN-LINE CHECK VALVES IN-LINE CHECK VALVES
In-line check valves only allow water to flow in one direction to safeguard against back surge
and maintain a pump’s prime.
Brand Model Number Port Size Brand Model Number Port Size
Jabsco 29295-1011 ¾" Barb Johnson 09-24792 1"/1½" Barb
Jabsco 29295-1000 1" Barb Johnson 09-24818 ¾"/1¼" Barb
Jabsco 29295-1010 1½" Barb Shurflo 340-001
½" Barb
IN-LINE STRAINERS IN-LINE STRAINERS
Many pump manufacturers offer strainers to install with their pumps to keep damage caus-
ing debris from ruining the pump or contaminating the water. Depco stocks all varieties of
strainers. Below are some common models for washdown and livewell. See our whole range
of strainers on pages 76-77 and 79-82.
Brand Model Number Mesh Description Brand Model Number Mesh Description
Jabsco 46200-0000 20 ¾" Barb Johnson 09-24652-04 20 ½" Barb/¾" Barb
Jabsco 46200-0010 09-24653-02 40 Klicktite/ ½" Barb/¾" Barb
Flojet 01740-000 20 ¾" Barb/ plug in 90° Johnson 20 ½" FPT
Flojet 01740-002 ¾" Barb 15935 20 ¾" FPT
40 Sherwood 18001
40 ½" Barb Sherwood
PRESSURE REGULATORS BULKHEAD AND IN-LINE MOUNT PRESSURE REGULATORS
Protect your boat’s water system appliances and pumps from the damaging pressure of
unregulated marina water hookups. These pressure regulators reduce high water pressures
of up to 100 psi down to safe levels. They also include a backflow preventer. The bulkhead
versions come in a variety of colors to compliment your vessel while the in-line will easily
mount between two ¾" garden hose fittings.
Brand NMuomdbeelr Mounting Inlet/Outlet Col or BMroadnedl Number Mounting Inlet/Outlet Color
Jabsco 44411-0045 In-line ¾" x ¾" White Shurflo 183-039-08 In-line ¾" x ¾" White
Jabsco 44411-2045 Bulkhead ¾" x ½" Chrome Shurflo 183-029-14 Bulkhead ¾" x ½" Chrome
Jabsco 44412-1045 Bulkhead ¾" x ½" White Shurflo 183-029-16 Bulkhead ¾" x ½" Black
Jabsco 44412-2045 Bulkhead ½" x ½" Chrome Shurflo 183-029-18 Bulkhead ½" x ½" White
Marco M165-100-00 Bulkhead ¾" x ½" White
ACCESSORIES LIVEWELL ACCESSORIES
Oxygenators and aerator heads spray streams of water back into the livewell tank, enriching
the water with oxygen. Models are available with adjustable heads or varying lengths.
Brand Part Number Description Size
Rule 78 Oxygenator sprayhead ¾" Barb
Rule 75 Variable Flow Control Valve ¾" Barb
Rule 73 ¾" FPT
Johnson Pump 90061 Livewell Debris Strainer
Johnson Pump 90331 Aerator Head 9" ¾"
Johnson Pump 90791 ¾"
Aerator Head 12¾" w/shut off valve ¾"
Aerator Head 6¾" w/shut off valve
727-446-1656 • 1-800-446-1656 • www.depcopump.com
Page 36 • Catalog 112
BILGE AND SHOWER
115 VAC...............38,41,44,47,89,100-102,111
Clutch Driven.............................30,48,84
Engine Driven...........................84,101,102
Float Switches................................... 42
Hand Operated................ 47,56,63,70,88,93
Hydraulic Drive................. 30,32,48,101,102
Self-Priming Bilge..... 43-48,86-88,100-103,111
Shower Sump............................. 38,39,43
Submersible Bilge.................... 40,41,56,89
AMT.............................................. 103
Barmesa.......................................... 89
Bosworth.................................. 47,70,88
Burks............................................. 100
Edson..........................................87,88
Flojet.......................................... 39,43
Flotec............................................. 44
Gianneschi....................... 43,89,93,101,111
Goulds............................................ 89
Jabsco.......................39,42-45,47,48,56,70
Jizar............................................... 89
Johnson Pump........................ 38-42,46,48
Lancaster......................................... 38
Little Giant....................................... 44
Marco............................................. 46
MP............................................ 48,101
Oberdorfer............................. 44,100,103
Pacer......................................... 48,102
Pedrollo.......................................... 89
Primetime....................................... 100
Rule................................ 38,40-42,47,56
Shurflo............................................ 40
Simer.............................................. 44
Tsurumi........................................... 89
Whale.................................. 38-40,47,70
Yamada........................................... 88
www.depcopump.com • 1-800-446-1656 • 727-446-1656
Catalog 112 • Page 37
SHOWER SUMPS WITH PUMPS
RULE 800-1100 GPH, 12 AND 24 VDC SHOWER SUMP
98 Series Rule’s new shower drain pumps utilize a sturdier and easier to install configuration that
includes an upgraded friction fitted pump (eliminating the need for pump mounting screws),
JOHNSON PUMP an enlarged joker valve, an easy clean scoop strainer, an additional rear mounting flange,
impact resistant snap-on lid and multiple port adaptors in various sizes (¾", 1", 1⅛").
Model Volts Max Fuse Inlet Outlet Dimensions
Number 12 vdc GPH Size Port Port (H x W x L)
98B 24 vdc 800 7.5 ¾", 1", 1⅛" ¾" Barb 5" x 9.5" x 9"
98B-24 12 vdc 800 ¾", 1", 1⅛" ¾" Barb 5" x 9.5" x 9"
99B 24 vdc 1100 4 ¾", 1", 1⅛" 1⅛" Barb 5" x 9.5" x 9"
99B-24 1100 7.5 ¾", 1", 1⅛" 1⅛" Barb 5" x 9.5" x 9"
4
1000 GPH, 12 AND 24 VDC SHOWER SUMP
The Johnson Pump marine shower sump is designed to meet the higher demands of today’s
boating industry. Features include a 1000 gph cartridge-style bilge pump, along with the
Ultima bilge switch for dependability and a tight-fitting lid to minimize splashing and odors.
This system is also equipped with a check valve on the outlet port, multiple inlet ports, and
an easy-clean mesh intake strainer.
Model Volts Max Fuse Inlet Outlet Dimensions
Number GPH Size Port Port Options (H x W x L)
12 vdc
57151 24 vdc 1000 5 ¾", 1", 1⅛" and 1½" Barb ¾" Barb 5.75" x 11.5" x 8.25"
57151-24 1000 3 ¾", 1", 1⅛" and 1½" Barb ¾" Barb 5.75" x 11.5" x 8.25"
57151 Series
JOHNSON PUMP/WHALE SHOWER, BILGE AND WASTEWATER PUMP AND TANK COMBOS
Johnson Pump and Whale offer shower sump systems for gray water that include multiple
inlet ports that make them ideal to collect wastewater from showers, sinks, and dishwashers.
Both brands utilize the dry running & self-priming diaphragm style pumps that will easily pass
small solids and air. Tanks and pumps are sold as an assembly or separately.
Model Description Max Inlet Outlet Dimensions
Number Volts GPM Port Port Options (H x W x L)
10-13350-03-003 Pump & Tank Combo 12 vdc 4.2 ¾", 1, & 1½" Barb ¾" Barb 7.25" x 11" x 13.4"
10-13350-04-004 Pump & Tank Combo 24 vdc 4.2 ¾", 1, & 1½" Barb ¾" Barb 7.25" x 11" x 13.4"
1" x 2 7.5" x 9.9" x 23.7"
GT1610B Tank only, pump optional 12/24 vdc 1" X 4, 1½" X 4
GT2010B Tank only, pump optional 12/24 vdc 1" X 4, 1½" X 4 1" x 2 9.1" x 9.9" x 23.7"
Diaphragm Pump Series
LANCASTER UP TO 36 GPM, 115 VAC MULTI-PURPOSE SUMP PUMP
Gray Water Pump The Lancaster models X99A33 and X99A50 gravity fed pumps are designed to remove clean
or wastewater from shower sumps and other applications such as laundry tray, wet bar sink,
lavatory sink, or air conditioning condensate. These 115 vac pumps are available in 1/3 or ½ hp.
The pumps operate automatically. As water is drained into the pump it raises a float switch
to a preset power “on” point. As the water is pumped out the float switch level drops to a
preset power “off” point. A strainer is required. A 230 vac model is also available.
Model Max Inlet Outlet Dimensions
Number Volts HP GPM Port Port Options (H x W x L)
X99A33 1½" NPT Female 1" NPT Female 7" x 6.44" x 11.75"
X99A50 115 or 230 vac 1⁄3 hp 31 1½" NPT Female 1" NPT Female 7" x 6.44" x 11.75"
115 or 230 vac ½ hp 36
727-446-1656 • 1-800-446-1656 • www.depcopump.com
Page 38 • Catalog 112
SELF-PRIMING SHOWER SUMP PUMPS
4.2 GPM JABSCO 50880 SERIES SHOWER PUMP JABSCO
Jabsco’s 50880 series shower and gray water pump features a unique 360° rotating head for
flexible installation. This pump self-primes up to 10 feet and will run dry without damage.
No-clog, filterless design means easy maintenance. Complies with USCG 183.410 and ISO
8846 Marine (Ignition Protection).
Model Fuse Max Inlet/Outlet Dimensions
Number Volts Size GPM Ports (H x W x L)
50880-1000 12 vdc 10 4.2 ¾" Barb 5.2" x 6.2" x 11.7"
50880-1100 24 vdc 5 4.2 ¾" Barb 5.2" x 6.2" x 11.7"
4.2 - 8.5 GPM JOHNSON PUMP VIKING SERIES SHOWER PUMP 50880 Series
Johnson Pump’s Viking Power 16 and 32 are an ideal choice for shower drains, wastewater, JOHNSON PUMP
and bilge pumping. This series incorporates a compact design and 360 degree movable
housing simplifying installation. The Viking series can run dry without damage, requires no Viking
strainers, and will prime up to 8 feet. The upgraded Viking 32 models will prime an additional
2 feet (10 feet total) and come equipped with a hand crank for manual operation and a ball FLOJET
bearing supported transmission for increased motor life.
4125 Series
Model Fuse Max Dimensions
Number Series Volts Size GPM Inlet/Outlet (H x W x L) WHALE
10-13350-03 Viking 16 12 vdc 8 4.2 ¾" or 1" Barb and ½" BSP 8" x 7.1" x 7.3" Gulper®
10-13350-04 Viking 16 24 vdc 8" x 7.1" x 7.3"
10-13373-03 Viking 32 12 vdc 4 4.2 ¾" or 1" Barb and ½" BSP 7.6" x 10.4" x 10.9"
10-13373-04 Viking 32 24 vdc 7.6" x 10.4" x 10.9"
12 8.5 1½" Barb
6 8.5 1½" Barb
5 GPM FLOJET 4125 SERIES SHOWER PUMP
The Flojet 4125 shower and gray water pumps have been steady performers for many years.
It will lift water up to 10 feet and will not be damaged by running dry. It can be operated
with a manual on/off switch or automatic level control (see page 42) and comes standard with
¾" barbed ports and a raw water strainer. Multiple port options (pages 75-76) and suction
strainers are available separately. See page 177 for service parts.
Model Fuse Max Dimensions
Number Volts Size GPM Inlet/Outlet (H x W x L)
04125-502 12 vdc 10 5 ¾" Barb 3.75" x 6.3" x 8.2"
04125-504 24 vdc 5 5 ¾" Barb 3.75" x 6.3" x 8.2"
3.7 - 5.0 GPM WHALE GULPER SHOWER PUMP
The Whale Gulper® 220 and 320 shower and gray water pumps incorporate duckbill valves in
both the inlet and outlet that are specifically designed to pump wastewater without clogging,
thus eliminating the need for a strainer. Pumps can be operated with a manual on/off switch
or automatic level control (see page 42), self-primes to 10 feet, and run dry without damage.
Pump head can be repositioned in any in-line direction by loosening the body ring clamp.
Gulper® 220 repair kit = AK1550, Gulper® 320 repair kit = AK2050
Model Fuse Max Dimensions
Number Series Volts Size GPM Inlet/Outlet (H x W x L)
BP1552 220 12 vdc 5 3.7 ¾" Barb 4.62" x 7" x 10.75"
BP1554 220 24 vdc 2.5 3.7 ¾" Barb 4.62" x 7" x 10.75"
BP2052 320 12 vdc 10 5 ¾" or 1" Barb 4.62" x 7.75" x 11"
BP2054 320 24 vdc 5 5 ¾" or 1" Barb 4.62" x 7.75" x 11"
www.depcopump.com • 1-800-446-1656 • 727-446-1656
Catalog 112 • Page 39
SUBMERSIBLE BILGE PUMPS
JOHNSON PUMP 525 - 2600 GPH PUMPS IN 12 VDC AND 24 VDC
Mayfair Interchange These rugged bilge pumps utilize high-quality material to achieve long operational life.
The 525-1250 gph models have cartridge style motors for easy cleaning. The heavy-
SHURFLO duty 1600-2600 gph pumps feature liquid cooled motors with double ball bearings and
either lip seals (1600) or mechanical shaft seals (2200 and 4000) for extended life.
Cartridge Style
Model Number Mayfair Model GPH at 3 Ft Volts Fuse Hose Dia Dimensions (H x W x L)
WHALE 5 ¾" 4½" x 2¾" x 4"
32503 28552 525 12 5 ¾" 4½" x 2¾" x 4"
Super Sub 32703 28572 700 12 5 ¾" 4½" x 2¾" x 4"
32903 28512 800 12 5 1⅛" 4½" x 2¾" x 4"
RULE 42123 42522 952 12 10 6" x 4¼" x 6½"
16004-00 1550 12 12 1⅛", 1¼" 7" x 4" x 6½"
LoPro 22004 1900 12 6 1⅛", 1¼" 7" x 4" x 6½"
22084 1900 24 25 1⅛", 1¼" 8½" x 4¾" x 6½"
40004 2600 12 15 1½", 2" 8½" x 4¾" x 6½"
40084 2600 24 1½", 2"
CARTRIDGE STYLE BILGE PUMPS 380 - 2000 GPH
This Shurflo bilge pump with anti-airlock design comes with a three year warranty.
Each pump is manufactured with a high density nylon housing, tinned copper wire,
and continuous duty motor. Their removable cartridge design allows easy cleaning
and/or motor cartridge replacement.
Model GPH Fuse Hose Dimensions
Number at 0 Feet Volts Size Dia. (H x W x L)
355-020-10 380 12 vdc 2.5 ¾" 4¼" x 3" x 3¾"
355-010-10 500 12 vdc 2.5 ¾" 4¼" x 3" x 3¾"
355-110-10 700 12 vdc 5 ¾" 4¼" x 3" x 3¾"
355-100-10 1000 12 vdc 6 1⅛" 4¼" x 3" x 3¾"
358-000-10 1500 12 vdc 10 1⅛" 6" x 5" x 7¼"
358-100-10 1500 24 vdc 6 1⅛" 6" x 5" x 7¼"
358-010-10 2000 12 vdc 15 1⅛" 6" x 5" x 7¼"
358-110-10 2000 24 vdc 8 1⅛" 6" x 5" x 7¼"
LOW PROFILE AUTOMATIC BILGE PUMP UP TO 1050 GPH
The Whale Super Sub low profile automatic bilge pump is ideal for tight spaces,
automatically senses bilge water level, and switches on and off. No separate switch
is required because of its built-in electric field sensor technology that contains
no moving parts and is unaffected by wave motion. The pump can be mounted
vertically or horizontally and comes equipped with a simple to remove strainer
that makes cleaning quick and easy. Pump is environmentally friendly. Conforms
to ISO 8849 and ISO 15083.
Model GPH Fuse Hose Dimensions
Number at 0 Feet Volts Size Dia. (H x W x L)
SS5212 650 12 vdc 5 ¾", 1" 2⅛" X 2⅛" X 8⅜"
SS1212 3" X 2⅛" X 9½"
SS1224 1050 12 vdc 5 1⅛" 3" X 2⅛" X 9½"
1050 24 vdc 2.5 1⅛"
LOW PROFILE AUTOMATIC BILGE PUMP UP TO 900 GPH
Designed to bring pumping power to tight spaces, Rule’s LoPro series bilge pumps
are only 2.4" high. The LP900S model features two automated modes. The first
one offers the option of having the pump engage at 1.3" or 2" of water. The second
mode checks for water by briefly turning on the pump every 2 ½ minutes. The
LP900D model uses a traditional float and/or panel switch. Fully rotating body
for easy installation.
Model Type GPH Volts Fuse Hose Dimensions
Number at 0 Feet Size Dia. (H x W x L)
LP900S Automatic 900 12 vdc 7.5 ¾”, 1” 2.4” x 2.4” x 9”
LP900D Standard 900 12 vdc 7.5 ¾”, 1” 2.4” x 2.4” x 7.12”
727-446-1656 • 1-800-446-1656 • www.depcopump.com
Page 40 • Catalog 112
SUBMERSIBLE BILGE PUMPS
360 - 4000 GPH PUMPS IN 12, 24 AND 32 VDC RULE
These traditional bilge pumps by Rule are activated by a panel switch or float Standard Bilge Pumps
switch purchased separately (see page 35 or 42). All models are totally submersible,
ignition protected, and incorporate an anti-air lock feature. RULE
32 VDC 24 VDC 12 VDC GPH at Max 12 vdc Hose Dimensions Computerized Series
Model Model Model 0 Feet Head Amps Dia. (H x W x L)
25DA-24 24DA ¾" 3⅞" x 2⅞" x 2⅞" RULE
11 20DA-24 25DA 360 12' 2.1 ¾" 3⅞" x 2⅞" x 2⅞"
15A 20DA 500 12' 1.6 ¾" 4⅜" X 2⅞" X 2⅞" Rule-Mate Automatic Series
21R 800 12' 3.4 ¾" 3¾" X 2⅜" X 2⅜"
20R 800 12' 5 1⅛" 4" X 2⅜" X 2⅜" JOHNSON PUMP
27DA-24 20F 800 12' 2.8 1⅛" 4" x 2⅞" x 2⅞"
03 20A 1000 12' 2.9 1, 1⅛" 4⅜" X 2⅞" X 2⅞" Heavy Duty
12 27DA 1100 12' 3.7 1⅛" 6" X 4¼" X 4¼"
16A 02 1500 12' 4.8 1⅛" 6" X 4¼" X 4¼"
10 2000 21' 8.4 1½" 7¼" X 4⅞" X 4⅞"
56D-24 14A 3700 25' 15.5 2" 7¼" X 4⅞" X 4⅞"
56D 4000 26' 15.5
COMPUTERIZED PUMPS IN 12, 24 VDC AND 110 VAC
Rule’s computerized bilge pumps operate on the principle of impeller resistance.
Every 2½ minutes the pump operates to check for water. If water is present, amp
draw is higher and the pump remains in operation. Once the pump has evacuated
the water the amp draw drops and the pump shuts off.
Model GPH Max Fuse Hose Dimensions
Number at 0 Feet Head Volts Size Dia. (H x W x L)
25SA
25SA-24 500 12' 12 vdc 2.5 ¾" 4.1" x 2.9" x 2.9"
20SA 500 12' 24 vdc 1.5 ¾" 4.1" x 2.9" x 2.9"
27SA 800 12' 12 vdc 5 ¾" 4.7" x 2.9" x 2.9"
27SA-24 1100 12' 12 vdc 6 1", 1⅛" 4.7" x 2.9" x 2.9"
53S 1100 12' 24 vdc 3 1", 1⅛" 4.7" x 2.9" x 2.9"
55S 2000 21' 12 vdc 15 1⅛" 7.75" x 4.75" x 4.75"
56S 3700 27' 12 vdc 25 1½" 8.25" x 4.9" x 4.9"
A53S 4000 27' 12 vdc 25 2" 9.25" x 4.9" x 4.9"
1800 18' 110 vac 1⅛" 7.75" x 4.75" x 4.75"
RULE-MATE AUTOMATIC PUMPS IN 12 AND 24 VDC
The eco-friendly Rule-Mate bilge pump series feature solid state water sensing
technology that eliminates the need for a separate float switch. When water enters
the bilge and reaches 2¾" a sensor turns the pump on while another sensor shuts
the pump off once the water is evacuated. The sensor’s unique “field effect”
technology is programmed to recognize the dielectric constant of water only. The
removable strainer snaps off for easy cleaning. Comes with both a straight hose
barb fitting and a 90° angled hose barb fitting.
12 vdc 24 vdc GPH Max Fuse Hose Dimensions
Model Model at 0 Feet Head Size Dia. (H x W x L)
RM500B RM500B-24 500 12' 3, 1.5 ¾" 4.38" X 2.85" X 4.38"
RM800B RM800B-24 800 12' 5, 3 ¾" 4.38" X 2.85" X 4.38"
RM1100B RM1100B-24 1100 12' 7.5, 4 1", 1⅛" 4.5" X 3.5" X 3"
RM1500A RM2000A-24 1500 12' 10 1", 1⅛" 6" X 7.25" X 6"
RM2000A 2000 12' 15, 7.5 1", 1⅛" 6" X 7.25" X 6"
HEAVY DUTY HIGH FLOW CARTRIDGE STYLE BILGE PUMPS
Designed to meet and exceed the tough demands of commercial and recreational
duty, these pumps have a liquid-cooled, 12-pole motor with double ball bearings
for extended service life. An automated switch turns the pump on when it detects
water in the bilge and shuts it off when the water is gone. Universal base plate and
choice of 1½" or 2" ports make installation simple. Removable check valve included.
12 VDC 24 VDC GPH Max Fuse Hose Dimensions
Model Model at 3 Feet Head Size Dia. (H x W x L)
16004-00 16084-00 10,6 1⅛" 5.86" x 4.25" x 5.86"
22004 22084 1550 16' 12,6 1⅛" or 1½" 7" x 4.25" x 7"
40004 40084 1900 16' 25,15 1½" or 2" 8.5" x 4.75" x 8.5"
3100 16'
www.depcopump.com • 1-800-446-1656 • 727-446-1656
Catalog 112 • Page 41
A U TO M AT I C B I L G E S W I T C H E S
RULE RULE MERCURY-FREE FLOAT SWITCHES
37A Rule’s family of mercury-free float switches come in a variety of configurations to meet the
needs of your installation. All three models are available with or without an in-line fuse.
35A
40A Model Number Cover Name Fuse Amps Volts Dimensions (H x W x L)
35A Rule-A-Matic No 14 12-24 vdc 2¼" x 1¾" x 5"
35FA Rule-A-Matic Yes 14 12-24 vdc 2¼" x 1¾" x 5"
37A Super Switch No 20 12-24-32 vdc 2¼" x 2" x 5"
37FA Super Switch Yes 20 12-24-32 vdc 2¼" x 2" x 5"
40A Rule-A-Matic Plus No 20 12-24-32 vdc 3" x 2½" x 5⅜"
40FA Rule-A-Matic Plus Yes 20 12-24-32 vdc 3" x 2½" x 5⅜"
SWITCHES BALL BEARING, MERCURY AND ELECTRIC SWITCHES
Sure Bail Sure Bail offers two types of switches, a solid-state electronic float switch or a mercury float
with a protective cover that incorporates a manual test feature. The Johnson Pump 2601
Ball Bearing uses a ball bearing that actuates a micro-switch within the float as the water level rises.
Ultima The Ultima Switch™ by Johnson Pump uses “field effect” technology to sense rising water
without any moving parts and is unaffected by oil, fuels, and debris.
Model Number Brand Type Volts Max Amps On/Off Dimensions (H x W x L)
15 1¾" / ⅞" 3" x 2½" x 5½"
Sure Bail Sure Bail Mercury* 6 - 32 vdc 15 2" / ¾" 2¼" x 3" x 4½"
20 2" / ¾" 2½" x 1¼" x 3½"
26014 Johnson Ball Bearing 6 - 32 vdc
36303 Johnson Electronic 12 - 24 vdc
*NOTE: Mercury switches cannot be sold in certain states including California, Maine and Connecticut.
Check your local laws. Mercury is an environmentally hazardous material and is extremely poisonous. Use
proper hazardous waste disposal practices when replacing a mercury switch.
ULTIMATE THE ULTIMATE SWITCH
Ultimate Junior The Ultimate switch family is the most reliable switch on the market. Tested to over 250,000
Ultimate Senior cycles, they have proven their reliability. Each switch comes with a 5 year warranty. The
Ultimate Junior and Ultimate Mini feature a non-magnetic sensor tube to actuate a pump
JABSCO/GROCO/RULE or alarm. The Ultimate Senior has two switch sensors which allow the operation of a pump
and alarm. Each switch comes with a stainless mounting clamp.
Model Number Volts Max Amps On/Off Height Diameter
Ultimate Senior 12 vdc 15 2½", 3½" / 1¼" 6¼" 2½"
Ultimate Senior 24/32 vdc 10 2½", 3½" / 1¼" 6¼" 2½"
Ultimate Junior 12 vdc 15 6¼" 2½"
Ultimate Junior 24/32 vdc 10 2½"/ 1¼" 6¼" 2½"
Ultimate Mini 12 vdc 20 2½" / 1¼" 4" 1¾"
Ultimate Mini 24/32 vdc 15 1½" / ¾" 4" 1¾"
1½" / ¾"
Ultimate Alarm 2-9V batteries 4¾" High 3⅝" Wide
Panel Mount
JABSCO/GROCO/RULE “AIR PRESSURE” SWITCHES
These remotely mounted switches are ideal for actuating self-priming or submersible pumps
where there is insufficient room in the bilge for a float switch. Both switches include an air
ball, tube (3' with Groco, 10' with Jabsco), and the switch (Jabsco switch is sealed within a
molded enclosure). Their principle of operation is based on the air pressure that develops
when water rises up the tube from the air bell. The compressed air actuates the switch by
pressing up against the enclosed diaphragm.
Model Number Brand Volts Max Amps On/Off Misc. Information
AS-100 Groco 6 - 32 vdc 15 2¾" / 1" 20 amps int. duty
39 Rule 20 2¼" / 1" 10' of tube included
39-24 Rule 12 vdc 10 2¼" / 1" 10' of tube included
59400-0012 Jabsco 24 vdc 20 2¼" / 1" 10' of tube included
59400-0024 Jabsco 12 vdc 10 2¼" / 1" 10' of tube included
24 vdc
727-446-1656 • 1-800-446-1656 • www.depcopump.com
Page 42 • Catalog 112
S E L F - P R I M I N G R U N D RY B I L G E P U M P S
4.3 - 5.0 GPM, 12-24-32 VDC, BILGE AND BAITWELL FLOJET/JABSCO
If compact size and low cost are important, these Jabsco and Flojet diaphragm
bilge pumps are right for you! They will self-prime to 10 feet, run dry without damage,
and come complete with a ¾" suction strainer. Both brands will also function as a
continuous duty baitwell pump. See pages 172 and 177 for service parts.
Volts Fuse Flow Dimensions Port
Model Number Brand Size GPM (H x W x L) Size
¾" Barb
31705-0092 Jabsco 12 vdc 15 4.3 3.5" x 4.19" x 7.73" ¾" Barb
31705-0094 Jabsco 24 vdc 10 4.3 3.5" x 4.19" x 7.73" ¾" Barb
04125-114 Flojet 12 vdc 15 5.0 3.75" x 6.3" x 9.2" ¾" Barb
04125-414 Flojet 32 vdc 5 5.0 3.75" x 6.3" x 9.2"
4 GPM, 12 VDC DRY BILGE PUMP 04125 & 31705 SERIES
Rule now offers an effective method of removing almost all of the water in your RULE
bilge, leaving ⅛” or less, keeping your bilge fresh, clean, and dry. The 4 gpm pump
drains the bilge almost dry. The filter-free design is self-priming to 9.5 feet. It can
run dry without damaging the pump. The backflow protection reduces water coming
back into the bilge. Rotating pump head and ports allow for custom configuration.
Compact and simple design. ¾” hose barbs, 90° thru-hull fitting and, a Dry Bilge
on/off panel switch is included. Meets USCG 183.410 and ISO 15083 specifications.
Model Number Volts Fuse Flow Max Dimensions Port
DB412 12 vdc Size GPM Head (H x W x L) Size
10 4 10’ 5.2” x 6.2” x 11.6” 3.4” Barb
4 - 8 GPM, 12-24-32 VDC BILGE DB412
Jabsco’s classic “PAR” diaphragm pump series is self-priming, dry running, and JABSCO
easily repaired. Each model comes with a built-in pulsation dampener, an in-line
strainer, and permanently lubricated ball bearings. The 36680 series will lift 7
feet vertically while the 36600 series will lift 10 feet.
Model Number Volts Amps/Fuse GPM Dimensions (H x W x L) Port Size
¾” Barb
36960-2000 12 vdc 6/8 ¾" Barb
36960-2010 24 vdc 5/7 4.0 7.31” x 6.31” x 7.5 ¾" Barb
36960-2020 32 vdc 2/3
36960-2000
36680-2000 12 vdc 7/10 36600-0000
36680-2010 24 vdc 5/6 5.5 8.5" x 6.5" x 7.62"
36680-2020 32 vdc 3/4 36680-2000
36600-0000 12 vdc 11/16 8.0 8.25" x 5.87" x 7"
36600-0010 24 vdc 5.5/8
36600-0020 32 vdc 11/15
7.8 - 9.5 GPM, 12 AND 24 VDC BILGE PUMP GIANNESCHI
Designed as a dependable high flow bilge pump, the Gianneschi PM40 and PM50
diaphragm pumps are made of high grade plastic which will not corrode in the
bilge environment. They utilize the diaphragm pumping principle which is dry
running, self-priming, and easy to repair.
Model Number Volts Amps/Fuse GPM Dimensions (H x W x L) Port Size
PM50 24 vdc 1" x 1"
PM40 12 vdc 4.57 7.8 8.9" x 13" x 12" 1" x 1"
PM40 24 vdc 7/10 9.5 7.16" x 12" x 4.6" 1" x 1"
4.5/7 9.5 7.16" x 12" x 4.6"
PM40 & PM50
www.depcopump.com • 1-800-446-1656 • 727-446-1656
Catalog 112 • Page 43
MOTORIZED FLEXIBLE IMPELLER
LITTLE GIANT/SIMER/FLOTEC 5 – 6 GPM, COMPACT SIZES IN AC AND DC VOLTAGES
¾" Bronze or Plastic Series These Little Giant, Simer (Mini-Vac) and Flotec pumps are economical and compact.
They are ideal for waterbed draining, portable self-priming sump, and water transfer.
OBERDORFER The Little Giant models have a chrome-plated bronze pump head while the Simer
and Flotec pumps utilize a non-metallic head with stainless steel wearplates. All
¾" Bronze Series models are self-priming.
Model Brand Volts Port Housing Max
Number Little Giant 115 vac Sizes Material GPM
360-115V Little Giant 12 vdc ¾" GHT Chrome/Bronze
365-12V 115 vac ¾" GHT Chrome/Bronze 6
M-40 Simer 12 vdc ¾" GHT Plastic/Stainless 5
BW85P* Simer 115 vac ¾" GHT Plastic/Stainless 6
FP0F360AC* Flotec ¾" GHT Plastic/Stainless 6
6
* Includes a 6' garden hose and PUD-L-SCOOP suction attachment.
6.5 – 12.5 GPM, 1/10 - 1/3 HP, IN AC AND DC VOLTAGES
The Oberdorfer 201 series bronze rubber impeller pumps are self-priming to 3 feet
when wet and have a choice of neoprene or Nitrile (Buna-N) impeller materials.
They are available in 115 vac, 12, 24, or 32 vdc. Each pump is threaded externally
with ¾" garden hose and internally with ⅜" npt. Below are a few of the pump and
motor combinations available. See page 168 for parts.
Model Volts Port GPM at Feet of Head
Number 115 vac Sizes 0 10 20 30 40
N211D-04-D28 115 vac ¾" GHT
N211M-F34 12/24/32 vdc ¾" GHT 6.5 6.2 6 5.5 4.7
N201D Series ¾" GHT 12.5 12.1 11.5 11 10
7 6.7 5.5 4 .3
JABSCO 8 – 20 GPM, DRY RUNNING IN DC VOLTAGES
¾" Run Dry Series These unique dry-running flexible impeller pumps utilize a liquid chamber that
retains water between uses allowing up to 30 minutes of dry running after their
OBERDORFER initial priming. Even dry, these pumps will lift 4 feet vertically. Each pump comes
equipped with oil-resistant Nitrile impeller, stainless shaft, and bronze pump housing.
305M (¾") and 405M (1") Series
Model Max Port GPM at Feet of Head
Number Volts GPM Sizes 11 23 34
¾" FPT
23920-2423 12 vdc 8 ¾" FPT 85 —
23920-2523 24 vdc 8 ¾" FPT 11 9 8
23920-2213 12 vdc 11 ¾" FPT 85 —
23920-2323 24 vdc 11 1" BSP 11 9 8
53040-2003 230 vac 50 hz 9 1½" BSP 87 6
53080-2003 230 vac 50 hz 20 19.5 17.5 16.5
8 – 25 GPM, 1/3 - 1 HP, IN AC AND DC VOLTAGES
These Oberdorfer bronze rubber impeller pumps are self-priming and have a choice of
neoprene or Nitrile (Buna-N) impellers. They are available in single and three phase,
50 and 60 Hz, 12 and 24 vdc, ODP, TEFC, and explosion-proof. See page 168 for parts.
Model Motor Port GPM at Feet of Head
Number Volts Phase HP Enclosure Sizes 10 20 40 60 80
305M-C81 7.1 6.7 - - -
305M-8-10F18BCT 12 vdc 1 ¼ TENV ¾" FPT 12.9 12.1 8.9 4.2 -
305M-8-30F18BCT 115/230 vac 3 1/3 TEFC ¾" FPT 12.9 12.1 8.9 4.2 -
305M-8-xxF18BCT 230/460 vac 1 1/3 TEFC ¾" FPT 12.9 12.1 8.9 4.2 -
405M-4-M26 12 vdc or 24 vdc 1 1/3 TEFC ¾" FPT 25 24 22 – –
405M-4-N26 115/230 vac 1 ¾ ODP 1" FPT* 25 24 22 17 11
405M-4-10N18BCT 115/230 vac 3 1 ODP 1" FPT* 25 24 22 17 11
405M-4-30N18BCT 115/230 vac 1 TEFC 1" FPT* 25 24 22 17 11
405M-4-xxN18BCT 230/460 vac 1 TEFC 1" FPT* 25 24 22 17 11
12 vdc or 24 vdc 1 TEFC 1" FPT*
*405M Series also has 1½" slip-on ports.
727-446-1656 • 1-800-446-1656 • www.depcopump.com
Page 44 • Catalog 112
MOTORIZED FLEXIBLE IMPELLER
1.5 - 3.4 GPM, COMPACT SIZES, IN AC AND DC VOLTAGES JABSCO
The 236XX series is the latest generation of Jabsco’s self-priming bronze Puppy 12210-0001
pumps utilizing fewer wearing parts. This series comes standard with Nitrile impeller, 23620-4003
ignition protected motor, and can self-prime to 5 feet. The 23620 and 23670 series Bronze (¾", 1") Compact Series
will self-prime to 5'. The 12210-0001 pump can self-prime to 20'! It comes with
a 6 foot cord and is especially compact for a 115 vac pump requiring a mounting JABSCO
envelope of only 3 ⅝” high, 4" wide x 6 ⅞" long.
Bronze (¾") and Plastic (5/8") Series
Model Fuse Max GPM at Feet of Head Port
Number Volts Size GPM 6 13 20 Sizes JABSCO
23620-4003 12 vdc 7.5 1" Barb
23620-4103 24 vdc 1.5 1.5 1.3 1.1 1" Barb
23670-4003 12 vdc 5 1.5 1.5 1.3 1.1 ¾" Barb
23670-4103 24 vdc 15 3.4 3.0 2.5 1.9 ¾" Barb
12210-0001 115 vac 10 3.4 3.0 2.5 1.9 ¾" Barb
- 3.4 3.4 3.2 2.9
5 - 9 GPM, COMPACT SIZES, IN AC AND DC VOLTAGES
These series of Jabsco self-priming pumps have been the workhorses of the industry
for over 40 years. Originally referred to as the Water Puppy (DC bronze series) and
Sturdy Puppy (ac bronze series), these rugged medium flow pumps will lift 4 feet
vertically and maintain a prime of up to 15 feet. See page 169 for service parts.
Model Pump Body Max GPM at Feet of Head Port
Number Construction Volts Amps GPM 10 20 30 Sizes
18660-0121 Bronze 12 vdc 8 6.3 5.4 4.2 2.8 ½" FPT and ¾" GHT
18670-0123 Bronze 12 vdc 11.5 9 8.4 7.7 6.9 ½" FPT and ¾" GHT
18670-0943 Bronze 24 vdc 9 8.4 7.7 6.9 ½" FPT and ¾" GHT
18610-0001 Bronze 115 vac 5 6.5 6.5 6.0 5.3 ½" FPT and ¾" GHT
12560-0001 Plastic 12 vdc – 5.0 4.6 3.7 1.7
12290-0001 Plastic 115 vac 7 5.8 5.8 5.0 3.8 ⅝" Slip-on Hose
– ⅝" Slip-on Hose
9.5 GPM, 1/3 HP, 115 VAC
The Jabsco 11810 series is available in 115 vac, will lift up to 10 feet, and maintain
a prime of up to 20 feet. Their solid brass housing is externally threaded for ¾"
male garden hose thread and internally for ½" fpt. These pumps are often used in
bilge, washdown, and general transfer applications. See page 169 for service parts.
Model Motor Volts Fuse Max GPM at Feet of Head Port
Number Enclosure Size GPM 10 20 30 Sizes
115 vac
11810-0003 Open 115 vac 15 9.5 9.5 8.1 6.8 ½" FPT and ¾" GHT
11810-0013 Enclosed 20 9.5 9.5 8.1 6.8 ½" FPT and ¾" GHT
23 GPM, ¾ HP, IN 115 VOLTS AC 11810 (¾") Series
The 6050 series pumps by Jabsco is their highest volume close-coupled pump JABSCO
moving up to 23 gpm, lifting water up to 10 feet and maintaining a prime of up to
22 feet! They are available with an open drip-proof or totally enclosed fan cooled 6050 (1") Series
motor. An optional vacuum switch can be installed to prevent dry running impeller
damage. See page 169 for service parts.
Model Motor Max GPM at Feet of Head Port
Number Enclosure Volts GPM 10 20 30 60 Sizes
6050-0003 Open 115 vac 23 23.0 22.0 19.5 15.5 1" FPT
6050-0013 Enclosed 115 vac 23 23.0 22.0 19.5 15.5 1" FPT
www.depcopump.com • 1-800-446-1656 • 727-446-1656
Catalog 112 • Page 45
MOTORIZED FLEXIBLE IMPELLER
MARCO 7.4 - 11.9 GPM COMPACT PUMPS IN 12 AND 24 VDC
UP1 / UP1-M / UP1-J Marco manufactures cost-efficient and long-lasting flexible impeller pumps that are ideal
for bilge and salt water transfer/recirculation applications. Self-priming to 5 feet. Available
MARCO in 12 and 24 vdc models, they are compact in size and come equipped with a nickel-plated
brass body, waterproof cable guide, and internal brush holders with an EMI filter.
Type Model Volts Fuse Max Inlet/Outlet Dimensions
Number Size GPM (H x W x L)
UP1-J 10 7.4 ¾" Barb or ⅜" BSP 3.25" x 3.75" x 6"
UP1-J M162-004-12 12 vdc 7.5 7.4 ¾" Barb or ⅜" BSP 3.25" x 3.75" x 6"
UP1 M162-004-13 24 vdc 20 9.2 1" Barb or ½" BSP 3.75" x 4.75" x 7"
UP1 15 9.2 1" Barb or ½" BSP 3.75" x 4.75" x 7"
UP1-M M162-002-12 12 vdc 20 11.9 1" Barb or ½" BSP 3.9" x 4.75" x 7.62"
UP1-M 15 11.9 1" Barb or ½" BSP 3.9" x 4.75" x 7.62"
M162-002-13 24 vdc
M162-006-12 12 vdc
M162-006-13 24 vdc
7.9 - 9.5 GPM COMPACT PUMPS IN 115 AND 230 VAC
Marco manufactures cost-efficient and long-lasting flexible impeller pumps that are ideal
for bilge and salt water transfer/recirculation applications. Self-priming to 9 feet. Available
in 115 vac 60 hz and 230 vac 50 hz, they are compact in size and come equipped with a
nickel-plated brass body and stainless steel shaft making them ideal for the harsh marine
environment.
Type Model Volts Amps Max Inlet/Outlet Dimensions
Number GPM (H x W x L)
UP1/AC 115 vac 8 1" Barb or ½" BSP
UP1/AC M162-001-1B 230 vac/50 hz 4 9.5 1" Barb or ½" BSP 7.5" x 5.6" x 12.5"
M162-001-1C 7.9 7.5" x 5.6" x 12.5"
UP1/AC 5.5 - 9 GPM PUMPS IN 12 AND 24 VDC
JOHNSON PUMP With their high level of flexibility the DC driven pumps from Johnson Pump can be used for
a variety of applications including bilge pumping, deck wash, water circulation, oil, and
F3B-19 / F38B-19 diesel refueling. Impellers are oil-resistant Nitrile. Pumps will self-prime to 10 feet. Motors
are continuous duty up to 7 psi and max 1 hour at 15 psi.
JOHNSON PUMP
Type Model Volts Fuse Max Inlet/Outlet Dimensions
F4B-19 / F5B-1907 Number Size GPM (H x W x L)
F3B-19 12 vdc ⅜" NPT
F3B-19 10-24516-03 24 vdc 20 5.5 ⅜" NPT 3.22" x 4.4" x 6.7"
F38B-19 10-24516-04 12 vdc 10 5.5 1" Barb or ½" NPT 3.22" x 4.4" x 6.7"
F38B-19 10-24727-03 24 vdc 20 9 1" Barb or ½" NPT 4.5" x 4.72" x 7"
10-24727-04 10 9 4.5" x 4.72" x 7"
12.5 - 14.5 GPM PUMPS IN 12 AND 24 VDC
With their high level of flexibility the DC driven pumps from Johnson Pump can be used for
a variety of applications including bilge pumping, deck wash, water circulation, oil, and
diesel refueling. Impellers are oil-resistant Nitrile. Pumps will self-prime to 10 feet. Motors
are continuous duty up to 7 psi and max 1 hour at 15 psi.
Type Model Volts Fuse Max Inlet/Outlet Dimensions
Number Size GPM (H x W x L)
F4B-19 12 vdc 1" Barb or ½" NPT
F4B-19 10-24689-03 24 vdc 25 12.5 1" Barb or ½" NPT 3.54" x 4.72" x 8"
F5B-1907 10-24689-04 12 vdc 15 12.5 3.54" x 4.72" x 8"
F5B-1907 10-24188-4 24 vdc 50 14.5 ¾" NPT 4.72" X 5.15" X 10.15"
10-24188-5 25 14.5 ¾" NPT 4.72" X 5.15" X 10.15"
727-446-1656 • 1-800-446-1656 • www.depcopump.com
Page 46 • Catalog 112
MANUAL AND ELECTRIC BILGE PUMPS
HEAVY DUTY DRY RUNNING DIAPHRAGM PUMP IN AC AND DC BOSWORTH
These Bosworth diaphragm pumps come in bronze or epoxy coated, marine grade aluminum AC and DC Bilge Pumps
construction. Self-priming to 15 feet. The suction and discharge ports come standard in 2"
slip-on hose and are available threaded in 1¼" and 1½" fpt sizes. Motor options include single BOSWORTH/WHALE
and three phase, 50 and 60 hz, IEEE-45 enclosure, and custom configurations that meet MCA,
Lloyds, ABS, and USCG specifications. Below are some examples of the sizes available. See Bronze and Aluminum
pages 87 and 88 for more diaphragm style pump options.
BOSWORTH/JABSCO/WHALE
Bronze Aluminum Port Voltage Hz HP Max
Model Number Model Number Size GPM Plastic
115/230 vac 60 ½
G2800B-10J18CT G2800-10J18CT 2" Slip-on 230/460 vac 60 ½ 20 JABSCO/RULE
G2800B-30J18CT G2800-30J18CT 2" Slip-on ½ 20
G2800B-12J18CT G2800-12J18CT 2" Slip-on 12 vdc ½ 20 Piston Bilge Pumps
G2800B-24J18CT G2800-24J18CT 2" Slip-on 24 vdc 20
MANUAL METALLIC HOUSING BILGE AND SEWAGE PUMPS
These rugged diaphragm pumps will hold up to years of duty. The Bosworth Guzzler series
comes standard with stainless steel hardware and a choice between a bronze or epoxy-coated
aluminum housing. The Whale Gusher 10 comes standard with epoxy coated aluminum housing
and stainless hardware. All models are self-priming to 12 feet and have removable handles. See
pages 70, 88 and 93 for more manual pump options.
Model Max Port Service
Number Brand Series GPM Size Mount Housing Kit
G2600-1¼ F Bosworth Guzzler 25 2600
G2600B-1¼ F Bosworth Guzzler 25 2" Hose & 1¼ FPT Bulkhead Aluminum 2600
BP3740 Whale Gusher 10 17 2" Hose & 1¼ FPT Bulkhead Bronze
1½" Hose Thru Deck/Bulkhead Aluminum AK3706
MANUAL PLASTIC HOUSING BILGE AND SEWAGE PUMPS
Diaphragm bilge pumps are self-priming to 12 feet and will pass solids with ease, making
them ideal as a manual sewage transfer pump. Models are available with a removable handle
and optional bulkhead or thru-deck mounting (see below).
Model Brand Series Max Port Mount Service
Number Bosworth GPM Size Handle Kit
G400H 400
BP9021 Whale Guzzler 10 1" Hose Not Removable Bulkhead
29240-0000 Jabsco Gusher Urchin 11 1½" Hose Not Removable Bulkhead AK9003
29250-0000 Jabsco 12 1" Hose Removable Bulkhead 29246-1000
G500H Bosworth Amazon 13 1" or 1½" Hose Removable Thrudeck 29256-1000
BP0510 Whale Amazon 15 1½" Hose Not Removable Bulkhead
BP4410 Whale Guzzler 20 1½" Hose Removable Thrudeck/Bulkhead 500
29270-0000 Jabsco MK5 Universal 23 1½" Hose Removable Thrudeck/Bulkhead AK8050
Guzzler Titan 25 1½" Hose Removable Bulkhead AK4400
Amazon 29276-1000
BRASS OR PLASTIC PISTON BILGE PUMPS
These piston bilge pumps are compact and easy to store as an emergency back-up pump.
The economical ABS plastic pumps by Rule come in 8 and 10 gallons per minute sizes. The
Jabsco pumps come in 6 and 12 gallons per minute sizes and are constructed of high quality
brass and oil resistant internal rubber parts.
Model Brand Max Hose Construction Additional Information
Number GPM Size
Jabsco Brass Comes w/60" of ½" hose
33760-0000 Rule 6 ½" ABS Plastic Comes w/24" of 1⅛" hose
165 Rule 8 1⅛" ABS Plastic Comes w/48" of 1⅛" hose
168 10 1⅛" Comes w/adj. mtg. bracket
33745-0000 Jabsco 12 1" Brass
www.depcopump.com • 1-800-446-1656 • 727-446-1656
Catalog 112 • Page 47
CLUTCH AND HYDRAULIC DRIVEN
JABSCO JABSCO 1" - 2" CLUTCH DRIVEN
Available in Electric or Manual Jabsco clutch pumps are used throughout the world on commercial and recre-
ational vessels for bilge, washdown, and baitwell application. They come in 1",
1¼", 1½", and 2" ports and are available manually operated or with a 12, 24, or
32 vdc clutch. See page 167 for service parts.
12 VDC Model 24 VDC Model 32 VDC Model Port GPM at 1800 RPM Belt/Pulley
Number Number Number Size Open Flow Size
11860-0005/0045 11860-0006/0046 11860-0007/0047 1" 26 2A/1B 7"
11870-0005/0045 11870-0006/0046 11870-0007/0047 1¼" 62 2A/1B 7"
18330-0000/0040 18330-0001/0041 18330-0002/0042 2" 83 2A/1B 7"
51080-9013 (Manual Clutch Pump) 1" 26 (1) ⅝" / 6"
6590-0005 (Manual Clutch Pump) 1¼" 62 (1) ⅝" / 6"
51200-9013 (Manual Clutch Pump) 1½" 62 (1) ⅝" / 7"
51270-9013 (Manual Clutch Pump) 2" 83 (1) ⅝" / 7"
JOHNSON PUMP JOHNSON 1" - 2" CLUTCH DRIVEN
Available in Electric or Manual Johnson Pump manufactures 4 sizes of 12, 24 and 32 vdc clutch driven pumps with
a double “A” belt or single “B” pulley. See page 165 for 10-13022 service parts.
12 VDC Model 24 VDC Model 32 VDC Model Port GPM at 1800 RPM Belt/Pulley
Number Number Number Size Open Flow Size
1" 25
10-24577-98-1/3 10-24577-98-2/4 10-24577-98-5/6 1¼" 62 2A/1B/7"
10-13022-95-1/3 10-13022-95-2/4 10-13022-95-5/6 1½" 62 2A/1B/7"
10-13022-98-1/3 10-13022-98-2/4 10-13022-98-5/6 2" 83 2A/1B/7"
10-13027-98-1/3 10-13027-98-2/4 10-13027-98-5/6 1" 25 2A/1B/7"
1¼" 58
10-24577-98 Pump w/o Clutch 1½" 62
10-13022-95 Pump w/o Clutch 2" 83
10-13022-98 Pump w/o Clutch
10-13027-98 Pump w/o Clutch
MP FLOMAX MP FLOMAX 1½", 2", AND 3" CLUTCH DRIVEN
Available in Electric or Manual MP Flomax self-priming centrifugals come in 1½", 2", and 3" sizes with optional
manual or electric clutch. Pumps are self-priming to 20 feet. These pumps are
also available in hydraulic, electric, gasoline, and diesel drive. Models shown
are available in bronze and cast iron. See pages 171 and 182 for service parts.
12 VDC Model 24 VDC Model 32 VDC Model Port 3600RPM/GPM at TDH Max Belt/Pulley
Number Number Number Size 20 50 80 100 Head Size
1½" 125 105 55 5 102'
FM5B-12V FM5B-24V FM5B-32V 2" 145 110 53 6 103' (2) ½" / 6"
FM8B-12V FM8B-24V FM8B-32V 2" 222 220 187 135 145' (2) ½" / 6"
FM10B-12V FM10B-24V FM10B-32V 3" 320 300 230 160 147' (2) ½" / 6"
FM 15B-12V FM15B-24V FM15B-32V 1½" 125 105 55 5 102' (2) ½" / 6"
2" 145 110 53 6 103' ½" or ⅝" / 3.5"
FM5B-Manual Clutch 2" 222 220 187 135 145' ½" or ⅝" / 3.5"
FM8B-Manual Clutch 3" 320 300 230 160 147' (2) ½" or ⅝" / 3.5"
FM10B-Manual Clutch (Double groove) (2) ½" or ⅝" / 3.5"
FM15B-Manual Clutch (Double groove)
MP FLOMAX/PACER MP FLOMAX AND PACER HYDRAULIC DRIVE
Hydraulic Drive These hydraulically driven self-priming centrifugals will lift up to 20 feet, move
up to 315 gpm and are available with 1½", 2" or 3" ports. The MP Flomax models
are available in bronze or cast iron construction. The Pacer models come standard
in corrosion-resistant thermoplastic. See pages 171 and 182 for service parts.
Brand Port GPM at TDH Max Hydraulic Fluid Required
Model Flomax Size 25 50 100 Head For Max Flow and Head
FM5 Flomax 1½" 150 150 70 130'
FM8 Flomax 2" 170 150 70 130' 6.5 gpm / 1800 psi
FM10 Flomax 2" 200 200 200 190' 6.5 gpm / 1800 psi
FM15 Pacer 3" 315 315 240 180' 15 gpm / 1800 psi
SE 1-½ EB Pacer 1½" 90 50 – 15 gpm / 1800 psi
SE 2 LB Pacer 2" 210 185 100 70'
SE 3 LB 3" 260 190 – 120' 9 gpm / 500 psi
85' 9.5 gpm / 1550 psi
9.2 gpm / 1200 psi
*Single 5/8" groove, 7" diameter clutch available
727-446-1656 • 1-800-446-1656 • www.depcopump.com
Page 48 • Catalog 112
The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.
Marine Catalog v112
Discover the best professional documents and content resources in AnyFlip Document Base.
Search