CIRCULAR CONNECTORS
M8 - M40, POWER - SIGNAL - ETHERNET
WWW.SEALCONUSA.COM
TABLE OF CONTENTS
M8 - M12 Cordsets
Molded Cordsets and Panel Mounts.........................................7
M12 Power
Housings, Inserts, Contacts, Accessories...............................13
M16 Connectors
Housings, Inserts, Contacts, Accessories...............................19
M23 PoE Connectors
Housings, Inserts, Contacts, Accessories...............................29
M23 RJ45 Connectors
Connectors, Accessories........................................................32
M23 Signal Connectors
Housings, Inserts, Contacts, Accessories...............................37
M23 Power, Hybrid Connectors
Housings, Inserts, Contacts, Accessories...............................50
M27 Signal Connector
Housings, Inserts, Contacts, Accessories...............................58
M40 Power Connectors
Housings, Contacts, Accessories............................................62
Stainless Steel Connectors
..............................................................................................69
Molded Cordsets
..............................................................................................73
Customization
..............................................................................................77
Technical Information
..............................................................................................78
*Assembly Instructions can be found at www.SealconUSA.com or by calling us at 1-800-456-9012
CIRCULAR CONNECTOR OPTIONS
FOR EVERY APPLICATION!
M8 M23 Signal
M12 Power
M12 Signal M40 Power
M23 Power M23 PoE
M23 RJ45
M16 Signal
M27 Signal
CIRCULAR CONNECTORS (M8-M40)
Other Products
CONNECTOR FEATURES + BENEFITS
Clear and modular structure of all connector series
Patented modular strain relief insert and contact insert
One step cable assembly and shielding
Simple, quick and reliable assembly into the connector housing
Color coding of spacers for
male and female inserts
Cable assembly and shielding is possible in
a single operation
Strain relief insert with four fingers, secured in a
recess, prevents cable rotation
Flexible EMC-O-ring guarantees reliable EMC-
protection for light and heavy braided shields
4
SEALCON CONNECTIVITY
M8 - M40 - POWER, SIGNAL, AND ETHERNET OPTIONS
WHY CHOOSE SEALCON AS YOUR CONNECTIVITY PARTNER?
Sealcon was founded in the winter of 1989 in Englewood, Colorado. Our goal is to provide
customers with the best possible cable management and connectivity solutions. We are proud to
represent a leading German manufacturer of Liquid Tight Strain Relief Fittings, Cord Grips, Cable
Glands, Circular Connectors, Flexible Conduit, and Other Cable & Wire Accessory Products.
Sealcon offers a vast portfolio of circular connectors to meet your requirements. Options are
available in many sizes from M8 - M40 addressing power, signal, ethernet and hybrid varients.
We can usually ship your order within 24 hours from our central warehouse in Colorado. We
replenish our inventory weekly and can respond to changing demands quickly. Our experienced
staff will help to answer any technical questions and are able to recommend the correct product
for your application.
1. HOW TO CONFIGURE A SEALCON CONNECTOR
2. Choose Housing Based on:
3.
1. Signal or Power
2. Style (straight, panel, right angle)
3. Connection System (threaded, Twilock, Twilock-S)
4. Material (Nickel Plated Brass, Stainless Steel)
5. Cable Diameter
Choose Contact Insert Based on:
1. Pinout (with or without contacts)
2. Type Of Contact (Crimp, solder or dip solder)
Choose Contact Based on:
1. Pin or Socket (if crimp)
2. Wire Guage (AWG)
*Solder inserts have integrated contacts.
No separate pins or sockets need to be ordered.
5
Mechanical Data Materials and Technical Data M8 - M12 CORDSETS M8 - M12 Cordsets
Housing Copper-Zinc alloy LOW VOLTAGE DATA TRANSMISSION
Overmold Thermoplastic Elastomer
Inserts (for contacts) Automation in manufacturing is increasing at the speed of
Contacts PA66 / Glass Fiber technology. With IIoT and smart machines, durable and
Contact surface at point of contact Copper-Zinc alloy reliable connectivity solutions are required to maximize output.
Seal / O-Rings Sealcon now offers M12 and M8 cordsets that are ideal for
Temperature Range Nickel and gold plated your application and will meet the demands of today’s industry
Fluorocarbon trends. With straight male and female, right angle and flying lead
Protection -22°F – 158°F (-30°C – 70°C) cordsets available, numerous options are possible. Whether you
static operating temperature are looking for just a few pieces or a few thousand, Sealcon is
23°F – 158°F (-5°C – 70°C) your supplier.
dynamic operating temperature
IP 67
Available in-stock with the following configurations.
Multiple lengths, cable material, and pin-out options available.
Visit www.SealconUSA.com or contact us for a complete list of cordset options and configurations available.
*Note: Cable length includes connector.
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 7
Dimensions & Specifications may be changed without prior notice
M8 - M12 Cordsets M8 - M12 CORDSETS
M8 CORDSETS
M8 CORDSETS -3 POSITIONS
Electrical Data 0.25 (24) 100’s of other configurations are available in addition to what is
listed in this catalog. Additional lead time may apply.
Contact-Ø [mm] (AWG) 2 Contact Sealcon for a complete list
30
Nominal current [A] 1000
> 102
Nominal voltage [V~] degree of protection 3
Test voltage (Breakdown voltage) [V~] <5
Insulation resistance [MΩ]
Max. contact resistance [mΩ]
Female Straight / Male Straight, 3-Position Cable Length Cable Type Part Number
1.30” (33 mm) 5 meter ...................PVC...............SJFFDFMD03M8050D
.94” (24 mm)
.39” (10 mm) .31” (8 mm) 1.30” (33 mm) .31” (8 mm)
M8 x 1 .39” (10 mm) .94” (24 mm)
M8 x 1
Female Straight / Male Straight, 3-Position Cable Length Cable Type Part Number
1.30” (33 mm) 1.30” (33 mm) 2 meter ...................PVC...............SJFFDFMD03M8020D
.94” (24 mm) .94” (24 mm)
.39” (10 mm) .31” (8 mm) .31” (8 mm)
M8 x 1 .39” (10 mm)
M8 x 1
*Note: Cable length includes connector.
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
8 Dimensions & Specifications may be changed without prior notice
M12 CORDSETS -4 POSITIONS, A-CODING M8 - M12 CORDSETS M8 - M12 Cordsets
Electrical Data 0.34 (22) M12 CORDSETS
Contact-Ø [mm] (AWG) 4 100’s of other configurations are available in addition to what is
240 listed in this catalog. Additional lead time may apply.
Nominal current [A] 1000 Contact Sealcon for a complete list
> 109
Nominal voltage [V~] degree of protection 3
Test voltage (Breakdown voltage) [V~] <5
Insulation resistance [MΩ]
Max. contact resistance [mΩ]
Female Straight / Flying Lead, 4-Position Cable Length Cable Type Part Number
1.73” (44 mm) 5 meter ...................PVC...................SJFFD04M12050D
1.10” (28 mm)
.57” (14.5 mm) .52” (13 mm)
M12 x 1
Male Straight / Flying Lead, 4-Position Cable Length Cable Type Part Number
1.77” (45 mm) 5 meter ...................PVC..................SJFMD04M12050D
1.10” (28 mm)
.57” (14.5 mm) .52” (13 mm)
M12 x 1
Female Right Angle / Flying Lead, 4-Position Cable Length Cable Type Part Number
1.46” (37 mm) 1.06” (27 mm) 5 meter ...................PVC...................SJFFC04M12050D
1.06” (27 mm)
.47” (12 mm)
M12 x 1
.57” (14.5 mm) Cable Length Cable Type Part Number
Female Right Angle / Male Straight, 4-Position1.06” (27 mm) 1.06” (27 mm) 1.77” (45 mm) 10 meter .................PVC.............SJFFCFMD04M12100D
.47” (12 mm) .57” (14.5 mm) 1.10” (28 mm) 3 meter ...................PVC.............SJFFCFMD04M12030D
1.46” (37 mm)
M12 x 1 .52” (13 mm)
M12 x 1
.57” (14.5 mm) Cable Length Cable Type Part Number
Male Right Angle / Female Straight, 4-Position1.06” (27 mm) 1.14” (29 mm) 1.73” (44 mm) 10 meter .................PVC.............SJFFDFMC04M12100D
.47” (12 mm) .57” (14.5 mm) 1.10” (28 mm) 3 meter ...................PVC.............SJFFDFMC04M12030D
1.46” (37 mm)
M12 x 1 .52” (13 mm)
M12 x 1
.57” (14.5 mm) Cable Length Cable Type Part Number
Female Straight / Male Straight, 4-Position 10 meter .................PVC.............SJFFDFMD04M12100D
1.73” (44 mm) 1.77” (45 mm) 10 meter .................PUR.............SJFFDFMD04M12100E
1.10” (28 mm) 1.10” (28 mm)
.57” (14.5 mm) .52” (13 mm) .52” (13 mm)
M12 x 1 .57” (14.5 mm)
M12 x 1
*Note: Cable length includes connector.
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 9
Dimensions & Specifications may be changed without prior notice
M8 - M12 Cordsets M8 - M12 CORDSETS
M12 CORDSETS
M12 CORDSETS -5 POSITIONS, A-CODING
Electrical Data 0.34 (22) 100’s of other configurations are available in addition to what is
listed in this catalog. Additional lead time may apply.
Contact-Ø [mm] (AWG) 4 Contact Sealcon for a complete list
60
Nominal current [A] 1000
> 109
Nominal voltage [V~] degree of protection 3
Test voltage (Breakdown voltage) [V~] <5
Insulation resistance [MΩ]
Max. contact resistance [mΩ]
Female Straight / Flying Lead, 5-Position Cable Length Cable Type Part Number
1.73” (44 mm) 10 meter ................PVC....................SJFFD04M12050D
1.10” (28 mm) 2 meter ..................PVC....................SJFFD05M12020D
.57” (14.5 mm)
M12 x 1 .52” (13 mm)
Male Straight / Flying Lead, 5-Position Cable Length Cable Type Part Number
1.77” (45 mm) 10 meter ................PVC...................SJFMD05M12100D
1.10” (28 mm) 2 meter ..................PVC...................SJFMD05M12020D
.57” (14.5 mm) .52” (13 mm)
M12 x 1
Female Right Angle / Flying Lead, 5-Position Cable Length Cable Type Part Number
1.46” (37 mm) 1.06” (27 mm) 10 meter ................PVC.....................SJFFC05M12100D
1.06” (27 mm)
.47” (12 mm)
M12 x 1
.57” (14.5 mm) Cable Length Cable Type Part Number
Female Right Angle / Male Straight, 5-Position 1.06” (27 mm) 1.77” (45 mm) 10 meter ................PVC..............SJFFCFMD05M12100D
.57” (14.5 mm) 1.10” (28 mm)
1.46” (37 mm)
1.06” (27 mm) M12 x 1
.47” (12 mm) .52” (13 mm)
M12 x 1 Cable Length Cable Type Part Number
.57” (14.5 mm)
1.06” (27 mm) 1.14” (29 mm) 10 meter ................PVC..............SJFFDFMC05M12100D
.47” (12 mm)Male Right Angle / Female Straight, 5-Position .57” (14.5 mm)
1.73” (44 mm) .52” (13 mm)
1.46” (37 mm) M12 x 1 1.10” (28 mm)
M12 x 1 Cable Length Cable Type Part Number
.57” (14.5 mm)
10 meter ................PVC..............SJFFDFMD05M12100D
Female Straight / Male Straight, 5-Position
1.77” (45 mm)
1.73” (44 mm) 1.10” (28 mm)
1.10” (28 mm)
.57” (14.5 mm) .52” (13 mm) .52” (13 mm)
M12 x 1 .57” (14.5 mm)
M12 x 1
*Note: Cable length includes connector.
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
10 Dimensions & Specifications may be changed without prior notice
M12 CORDSETS -8 POSITIONS, A-CODING M8 - M12 CORDSETS M8 - M12 Cordsets
Electrical Data 0.25 (24) M12 CORDSETS
Contact-Ø [mm] (AWG) 2 100’s of other configurations are available in addition to what is
30 listed in this catalog. Additional lead time may apply.
Nominal current [A] 1000 Contact Sealcon for a complete list
> 109
Nominal voltage [V~] degree of protection 3
Test voltage (Breakdown voltage) [V~] <5
Insulation resistance [MΩ]
Max. contact resistance [mΩ]
Male Right Angle / Female Straight, 8-Position Cable Length Cable Type Part Number
1.46” (37 mm) 5 meter ..................PVC..............SJFFDFMC08M12100D
M12 x 1
.57” (14.5 mm)
1.06” (27 mm)
.47” (12 mm)
1.14” (29 mm)
.57” (14.5 mm)
M12 x 1
.52” (13 mm)
1.73” (44 mm)
1.10” (28 mm)
M12 PANEL MOUNTS WITH CABLE -4 POSITIONS, A-CODING
Electrical Data 0.25 (24)
Contact-Ø [mm] (AWG) 4
Nominal current [A] 60
1000
Nominal voltage [V~] degree of protection 3 > 109
Test voltage (Breakdown voltage) [V~]
Insulation resistance [MΩ]
Rear Panel Mount - M12 Cable Length Part Number
50 cm .........................................SJEM04M12PG9BM50
.78” (20 mm) 19.68” (50 cm)
.35” (9 mm)
.12” (3 mm)
.60” (15.2 mm)
PG 9
M12 x 1
Front Panel Mount - M12 Cable Length Part Number
50 cm ........................................SJEM04M12PG9FM50
.75” (19 mm) 19.68” (50 cm)
.27” (7 mm)
.12” (3 mm)
M12 x 1 *Note: Cable length includes connector.
PG 9
.60” (15.2 mm)
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 11
Dimensions & Specifications may be changed without prior notice
Mechanical Data Materials and Technical Data M12 POWER
Housing Brass / Die Cast COMPACT AND POWERFUL
INOX AISI 316 L
Housing surface TPU (moulded versions) A major milestone in an age of miniaturization: the M12
Nickel plated Power. Circular connectors in the past have required
Inserts Other Surfaces Upon Request a large footprint in order to carry large currents, but
Contacts PBT Fire protection class V-0 not anymore. With a compact size, large temperature
Contact surface at point of contact Copper alloy / Brass extremes, and the capability of carrying up to 16 Amps,
Minimum mating cycles Gold plated this connector solves space requirement issues required
Seals / O-Rings > 100 in today’s automation industry.
Temperature range
FKM / Buna-N / HNBR M12 Power
Type of contacts -40°F – 257°F (-40°C – 125°C) (K + L)
Protection -40°F – 185°F (-40°C – 85°C) (S + T)
Cable diameter range Crimp K + L, Screw S + T
IP 67/ IP 69K
.11 – .43“ (3 - 11 mm)
Electrical Data S (Screw) T (Screw) K (Crimp) L (Crimp)
Coding black dark grey blue grey
4 (3 + PE) 4 5 (4 + PE) 5 (4 + PE)
Colors 0.5 - 1.5 mm 0.5 - 1.5 mm 0.75 - 2.5 mm 0.75 - 2.5 mm
Number of positions AWG 20 – 16 AWG 20 – 16 AWG 18 – 14 AWG 18 – 14
AWG 12 12 16 16
Nominal current [A] 630 63 630 63
Nominal voltage [V~] degree of protection 3 3310 840 3310 840
Test voltage (Breakdown voltage) [V~] > 102 > 102 > 102 > 102
Insulation resistance [MΩ]
<3 <3 <3 <3
Max. contact resistance [mΩ]
NOMINAL CURRENT: Allowable current (Amp), that can be transmitted by each contact continuously and simultaneously.
NOMINAL VOLTAGE: Allowable voltage (Volt), that can be applied to each contact continuously and simultaneously.
TEST VOLTAGE: Voltage which, under certain conditions, a connector can be exposed to without breakdown.
DEGREE OF PROTECTION: Potential dirt accumulation of a disconnected connector in a certain environment.
Components Needed For A Complete M12 Power Connector: S+T Coding Ferrule Accessories
- HOUSING (pg 14 - 16) For proper assembly, screw terminals should use ferrules for a
- INSERT (pg 17) secure connection. Ferrules are not included in Sealcon Connectors
- CONTACTS (if crimp contact insert is selected) (pg 17) and will need to be sourced from a supplier.
*S+T codings require ferrules for installation
Suggested Ferrules
For 16 AWG.........Panduit #FSD78-8-D or equivalent
For 18 AWG.........Panduit #FSD77-8-D or equivalent
! Do not connect or disconnect Sealcon Connectors under load
*Assembly Instructions can be found at www.SealconUSA.com or by calling us at 1-800-456-9012
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 13
Dimensions & Specifications may be changed without prior notice
M12 POWER Cable-Ø Coding Part Number
HOUSINGS
Straight Connector, Female Thread
2.03” (51.8 mm) ø .77” (19.7 mm) 3 – 6 mm (.11 – .23“)......K, L.....SA712-7.K10.300.000
Screw Crimp 5 – 9 mm (.20 – .35“)......K, L.....SA712-7.K10.400.000
8 – 11 mm (.31 – .43“)....K, L.....SA712-7.K10.500.000
.70” .70” 3 – 6 mm (.11 – .23“)......S, T......SA712-7.S10.300.000
(18 mm) (18 mm) 5 – 9 mm (.20 – .35“)......S, T......SA712-7.S10.400.000
8 – 11 mm (.31 – .43“)....S, T......SA712-7.S10.500.000
M12 Power Straight Connector, Male Thread Cable-Ø Coding Part Number
2.17” (55.3 mm) M12 x 1 3 – 6 mm (.11 – .23“).......K, L.....SA712-7.K20.300.000
ø .77” (19.7 mm) 5 – 9 mm (.20 – .35“).......K, L.....SA712-7.K20.400.000
8 – 11 mm (.31 – .43“).....K, L.....SA712-7.K20.500.000
Screw Crimp
.70” .70” 3 – 6 mm (.11 – .23“).......S, T.....SA712-7.S20.300.000
(18 mm) (18 mm) 5 – 9 mm (.20 – .35“).......S, T.....SA712-7.S20.400.000
8 – 11 mm (.31 – .43“).....S, T.....SA712-7.S20.500.000
Right Angle Connector, Female Thread Cable-Ø Coding Part Number
1.56” (39.8 mm) ø .77” (19.7 mm) 3 – 6 mm (.11 – .23“)......K, L......SA712-7.K30.300.000
Screw Crimp 5 – 9 mm (.20 – .35“)......K, L......SA712-7.K30.400.000
8 – 11 mm (.31 – .43“)....K, L......SA712-7.K30.500.000
1.77” (45 mm) .66” 3 – 6 mm (.11 – .23“)......S, T......SA712-7.S30.300.000
(17 mm) 5 – 9 mm (.20 – .35“)......S, T......SA712-7.S30.400.000
8 – 11 mm (.31 – .43“)....S, T......SA712-7.S30.500.000
.70”
Right Angle Connector, Male Thread (18 mm) Cable-Ø Coding Part Number
1.71” (43.6 mm) M12 x 1 3 – 6 mm (.11 – .23“)......K, L......SA712-7.K31.300.000
ø .77” (19.7 mm) 5 – 9 mm (.20 – .35“)......K, L......SA712-7.K31.400.000
Screw Crimp 8 – 11 mm (.31 – .43“)....K, L......SA712-7.K31.500.000
1.77” (45 mm) .66” 3 – 6 mm (.11 – .23“)......S, T......SA712-7.S31.300.000
(17 mm) 5 – 9 mm (.20 – .35“)......S, T......SA712-7.S31.400.000
8 – 11 mm (.31 – .43“)....S, T......SA712-7.S31.500.000
.70”
(18 mm)
Panel Connector Male Thread, Single Hole Front Mounted1.17” (29.85 mm) .59” (15.2 + 0.1 mm) Type Part Number
.54” (13.9 mm)
M12 x 1 Thread M16 K, L (Crimp)..............SA712-7.K42.000.000
Thread M20 K, L (Crimp)..............SA712-7.K42.100.000
.66” Thread M20 S, T (Screw)..............SA712-7.S42.000.000
(17 mm) with lock nut “rotation protection“
Thread M16 K, L (Crimp)..............SA712-7.K42.000.00G
.63” (16.2 + 0.1 mm) Thread M20 K, L (Crimp)..............SA712-7.K42.100.00G
Panel hole Thread M20 S, T (Screw)..............SA712-7.S42.000.00G
M16 x 1.5 ø .63” (16.2 + 0.1 mm)
M16 x 1.5
S+T codings require ferrules for installation, see page 13 for specifications ! Pin inserts mountable with male thread housings only.
Socket inserts mountable with female thread housings only.
Drawings apply for coding K + L only.
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
14 Dimensions & Specifications may be changed without prior notice
M12 POWER
HOUSINGS
Panel Connector Female Thread, Single Hole Front Mounted Type Part Number
1.05” (26.8 mm) .66” .59” (15.2 + 0.1 mm) Thread M16 K, L (Crimp)..............SA712-7.K44.000.000
.62” (15.8 mm) (17 mm) Thread M20 K, L (Crimp)..............SA712-7.K44.100.000
Thread M20 S, T (Screw)..............SA712-7.S44.000.000
.63” (16.2 + 0.1 mm) with lock nut “rotation protection“
Panel hole Thread M16 K, L (Crimp)..............SA712-7.K44.000.00G
Thread M20 K, L (Crimp)..............SA712-7.K44.100.00G
Thread M20 S, T (Screw)..............SA712-7.S44.000.00G
M16 x 1.5 ø .63” (16.2 + 0.1 mm) M12 Power
Panel Connector Male Thread, Single Hole Rear Mounted .59” (15.2 + 0.1 mm) Type Part Number
M16 x 1.5 Thread M16 K, L (Crimp).............SA712-7.K50.000.000
.52” (13.4 mm) Thread M20 S, T (Screw).............SA712-7.S50.000.000
M12 x 1
1.17” (29.85 mm) .74”.63” (16.2 + 0.1 mm)
1.00” (25 mm) (19 mm)
Panel hole max.
.66” 11 mm
(17 mm)
ø .73”M(1166.x21+.50.1 mm)
Panel Connector Female Thread, Single Hole Rear Mounted Type Part Number
M16 x 1.5 .59” (15.2 + 0.1 mm) Thread M16 K, L (Crimp).............SA712-7.K51.000.000
.52” (13.4 mm) Thread M20 S, T (Screw).............SA712-7.S51.000.000
1.05” (26.8 mm) .74” .63” (16.2 + 0.1 mm)
.87” (22.3 mm) (19 mm) Panel hole max.
.66”
(17 mm) 11 mm
ø .63” (16.2 + 0.1 mm)
M16 x 1.5
Panel Connector Male Thread, Front Mounting Type Part Number
with flange 20 x 20 mm, 4 x 2.7 mm
M12 x 1 .78” (20 mm) K, L (Crimp)................................SA712-7.K40.000.000
.55” (14 mm)
1.12” (28.7 mm) with flange 25 x 25 mm, 4 x 2.7 mm
ø 2.7 mm S, T (Screw)................................SA712-7.S40.000.000
4 x holes 3.2 mm upon request
ø .55” (14 + 0.1 mm)
S+T codings require ferrules for installation, see page 13 for specifications
! Pin inserts mountable with male thread housings only.
Socket inserts mountable with female thread housings only.
Drawings apply for coding K + L only.
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 15
Dimensions & Specifications may be changed without prior notice
1.18” (30.1 mm)M12 POWER Type Part Number
.38” (9.8 mm) Thread M16 K, L (Crimp)...............SA712-7.K42.200.000
HOUSINGS, ACCESSORIES Thread M20 S, T (Screw)...............SA712-7.S42.200.000
Panel Connector Male Thread, Single Hole Front Mounted, Orientable ! Drawing shows coding S + T
M12 x 1 Type Part Number
.90” (23 mm) Thread M16 K, L (Crimp)..............SA712-7.K44.200.000
.90” (23 mm) Thread M20 S, T (Screw)..............SA712-7.S44.200.000
M12 Power M20 x 1.5 M20 x 1.5 ! Drawing shows coding S + T
.79” (20.2 + 0.1 mm)
Panel Connector Female Thread, Single Hole Front Mounted, Orientable
1.07” (27.2 mm) .90” (23 mm)
.33” (8.4 mm) .90” (23 mm)
M20 x 1.5 .79” (20.2 + 0.1 mm)
M20 x 1.5
*Molded cordsets also available - Contact Sealcon for details
Plastic protective cap for connectors Brass protective cap with chain for
with male thread......SA712-7.000.980.161 connectors with female thread
with female thread...SA712-7.000.980.162 Length 70 mm........SA712-7.010.9S0.705*
Brass protective cap for connectors with Brass protective cap with chain
female thread .........SA712-7.010.900.163 for connectors with male thread
Length 70 mm........SA712-7.010.9S0.704*
Brass protective cap for connectors with
male thread...............A712-7.010.900.162 Crimp tool for manual crimping of machined
crimp contacts for signal connectors M12,
Tool Adapter for tightening or loosening M16 and M23....................S7.000.900.908
knurled nuts for M12 Power / M16 ...........
.........................................S7.010.900.191 Screw Tool, adjustable 0.5 - 1.7 Nm .........
..........................................S7.010.900.190
S+T codings require ferrules for installation, see page 13 for specifications *Upon Request
! Pin inserts mountable with male thread housings only.
Socket inserts mountable with female thread housings only.
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
16 Dimensions & Specifications may be changed without prior notice
M12 POWER
INSERTS, CONTACTS
Inserts K-Coding (Crimp) ! Max wire insulation ø 2.9 mm Type Part Number
Crimp insert, pins, 4 + PE
Insert Pin Mating View Insert Socket Mating View without contacts .........................SA712-7.K03.941.101
Required contacts: 4 x pins, 1 x socket PE
Inserts L-Coding (Crimp)
Crimp insert, sockets, 4 + PE
Insert Pin Mating View without contacts .........................SA712-7.K03.941.102
Required contacts: 4 x sockets, 1 x pin
Inserts S-Coding (Screw)
Type Part Number M12 Power
Insert Pin Mating View Crimp insert, pins, 4 + PE
! Max wire insulation ø 2.9 mm without contacts .........................SA712-7.L03.941.101
Inserts T-Coding (Screw) Required contacts: 4 x pins, 1 x socket PE
Insert Socket Mating View
Insert Pin Mating View Crimp insert, sockets, 4 + PE
without contacts .........................SA712-7.L03.941.102
Required contacts: 4 x sockets, 1 x pin
Type Part Number
Insert with pins 3 + PE
contacts with screw termination..SA712-7.S05.931.105
Insert Socket Mating View Insert with sockets 3 + PE
contacts with screw termination..SA712-7.S05.931.106
S+T codings require ferrules for installation, see page 13 for specifications
Type Part Number
Insert with pins 4-pole
contacts with screw termination..SA712-7.T05.904.105
Insert with sockets 4-pole
contacts with screw termination..SA712-7.T05.904.106
Insert Socket Mating View
S+T codings require ferrules for installation, see page 13 for specifications
Contacts Type Crimp Range Part Number
Crimp pin 1.5 mm, machined ....................(18 AWG) 0.75 mm2..........SA712-7.010.901.521*
Crimp pin 1.5 mm, machined .....................(16 AWG) 1.5 mm2.............SA712-7.010.901.531
Crimp pin 1.5 mm, machined .....................(14 AWG) 2.5 mm2.............SA712-7.010.901.541
Crimp socket 1.5 mm PE, machined...........(18 AWG) 0.75 mm2.........SA712-7.010.911.522*
Crimp socket 1.5 mm PE, machined............(16 AWG) 1.5 mm2............SA712-7.010.911.532
Crimp socket 1.5 mm PE, machined............(14 AWG) 2.5 mm2............SA712-7.010.911.542
Crimp socket 1.5 mm, machined................(18 AWG) 0.75 mm2.........SA712-7.010.901.522*
Crimp socket 1.5 mm, machined..................(16 AWG)1.5 mm2............SA712-7.010.901.532
Crimp socket 1.5 mm, machined..................(14 AWG) 2.5 mm2...........SA712-7.010.901.542
These values are only guidelines and actual conductor cross sections depend on manufacturer tolerances.
*Under Development
! Pin inserts mountable with male thread housings only.
Socket inserts mountable with female thread housings only.
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 17
Dimensions & Specifications may be changed without prior notice
M16 CONNECTORS
CIRCULAR CONNECTORS AND TWINTUS
Mechanical Data Materials and Technical Data The M16 connector is a favorite in industry due to the
capabilities and performance that is offered all within
Housing Copper-Zinc alloy , Die Cast a compact housing. This connector is available in
Housing surface Nickel plated, Other surface upon request both signal and power as well as a TWINTUS version.
Inserts The M16 connector is ideal for small drives but is very
Thermoplastic Polyamide PA 6 (Nylon 6/6), diverse in its application potential.
Contacts
Contact surface at point of contact PBT
Minimum mating cycles
Seals / O-Rings Fire protection class V-0
Temperature range
Type of contacts Brass alloy
Protection Nickel and gold plated (0.25 μm)
Cable diameter range > 1000*) *) Sealcon to Sealcon connector
Buna-N standard, optional FKM
-40°F – 257°F (-40°C – 125°C)
Crimp, dip-solder (PCB) (for printed circuit
boards)
IP 67 / IP 69K per EN 60 529 (connected),
NEMA 4x
.08 – .43“ (2 - 11 mm)
Electrical Data 3 (3 x 1 mm) 3 (3 x 2 mm) 4 + 3 + PE / 320 V 4 + 3 + PE / 600 V
Number of positions 3 3 4 4 4 4 M16
1 2 0.8 1.6 0.8 1.25
Number of contacts (26 - 17) (20 - 14) (28 - 22) (22 - 16) (28 - 22) (20 - 16)
Contact-Ø [mm] 0.14 – 1 0.5 – 2.5 0.08 – 0.34 0.34 – 1.5 0.08 – 0.34 0.5 – 1.5
AWG [mm2] 8 20 5 16 5 16
400 400 160 320 300 630
Nominal current [A]
Nominal voltage [V~] degree of 2500 2500 1500 2500 1500 2500
protection 3 > 1010 > 1010 3 > 1010
Test voltage (Breakdown voltage) [V~] > 1010
Insulation resistance [MΩ] 3 3 3
3
Max. contact resistance [mΩ]
Electrical Data 6 + PE 10 12 + 3 18
Number of positions 7 10 12 3 18
1.25 1 0.8 1.25 0.8
Number of contacts (20 - 16) (26 - 18) (28 - 20) (20 - 16) (28 - 22)
Contact-Ø [mm] 0.5 – 1.5 .14 – 0.75 0.08 – 0.34 0.5 – 1.5 0.08 – 0.34
AWG [mm2] 16 8 3 10 3
600 160 24 60 24
Nominal current [A]
Nominal voltage [V~] degree of 2500 1500 1500 > 1010 2500 1500
protection > 1010 > 106 3 3 > 1010
Test voltage (Breakdown voltage) [V~]
Insulation resistance [MΩ] 3 3 3
Max. contact resistance [mΩ]
Components Needed For A Complete M16 Signal Connector: Connection System Types
- HOUSING (pg 20 - 23) THREADED TWILOCK 1/4 Turn
- INSERT (pg 24 - 26)
- CONTACTS (if crimp contact insert is selected) (pg 26)
See Technical Information page 78
*Assembly Instructions can be found at www.SealconUSA.com or by calling us at 1-800-456-9012
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 19
Dimensions & Specifications may be changed without prior notice
M16 CONNECTORS Cable-Ø Part Number
HOUSINGS Elongated 3 – 6 mm (.11 – .23“)..........................S7.810.300.000
2.01” (51.2 mm) 5 – 9 mm (.20 – .35“)..........................S7.810.400.000
Straight Connector, Female Thread / Elongated ø .77” (19.7 mm) 8 – 11 mm (.31 – .43“)........................S7.810.500.000
ø .77” (19.7 mm) *Elongated
1.818” (46.2 mm) 3 – 6 mm (.11 – .23“)..........................S7.811.300.000
5 – 9 mm (.20 – .35“)..........................S7.811.400.000
.70” .70” 8 – 11 mm (.31 – .43“)........................S7.811.500.000
(18 mm) (18 mm)
.70” .70”
(18 mm) (18 mm)
Straight Connector, Female Thread TWILOCK - Quick Connect Cable-Ø Part Number
1.81” (46 mm) 3 – 6 mm (.11 – .23“)..........................S7.816.300.000
5 – 9 mm (.20 – .35“)..........................S7.816.400.000
ø .81” (20.8 mm) 8 – 11 mm (.31 – .43“)........................S7.816.500.000
M16 Straight Connector, Male Thread .70” .70” Cable-Ø Part Number
(18 mm) (18 mm)
3 – 6 mm (.11 – .23“)..........................S7.820.300.000
1.88” (47.8 mm) 5 – 9 mm (.20 – .35“)..........................S7.820.400.000
8 – 11 mm (.31 – .43“)........................S7.820.500.000
M16 x 0.75 *ALSO MATES WITH
TWILOCK SYSTEM*
.70” .70”
(18 mm) (18 mm)
Right Angle Connector With Positioning Cable-Ø Part Number
1.77” (45 mm) 3 – 6 mm (.11 – .23“)..........................S7.831.300.000
5 – 9 mm (.20 – .35“)..........................S7.831.400.000
1.56” (39.6 mm) 8 – 11 mm (.31 – .43“)........................S7.831.500.000
.70” (18 mm) ø .77” (19.7 mm)
.70” (18 mm)
Panel Connector With Built In Cable Strain Relief Cable-Ø Part Number
1.818” (46.2 mm) Rear mounting, single hole mounted
.80” (20.3 mm) 2 – 7 mm (.08 – .27“)..........................S7.852.300.000
5 – 9 mm (.20 – .35“)..........................S7.852.400.000
M16 x 0.75 Including jam nut PG11
.59” .86” .82” Panel hole *ALSO MATES WITH
(15 mm) (22 mm) (21 mm) max. TWILOCK SYSTEM*
10 mm
ø .73” (18.6 + 0.1 mm)
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
20 Dimensions & Specifications may be changed without prior notice
M16 CONNECTORS
HOUSINGS
Panel Connector With Built In Cable Strain Relief Cable-Ø Part Number
1.81” (46 mm) .78” (20 mm) Rear mounting, M2.5 x 4 single hole mounted
1.22” (31 mm) .59” (15 mm) .59” (15 mm) 2 – 7 mm (.08 – .27“)..........................S7.847.300.000
5 – 9 mm (.20 – .35“)..........................S7.847.400.000
.59” .78” M2.5
(15 mm) (20 mm) M16 x 0.75 *ALSO MATES WITH
Panel hole max. TWILOCK SYSTEM*
6 mm
ø .63” (16.2 + 0.1 mm)
Panel Connector, Male Thread, Front Mounting Type Part Number
4 x holes Ø 2.7 mm (.11“) ....................S7.840.000.000
M16 x 0.75 .78” (20 mm) .98” (25 mm) Flange 20 x 20 mm
.59” (15 mm) ø 2.7 mm
4 x holes Ø 2.7 mm (.11“) ....................S7.840.100.000
.92” (23.5 mm) ø 2.7 Flange 25 x 25 mm
mm Optional: Flat gasket....STAD1-7P2510
Panel hole .78” (19.8 mm) *ALSO MATES WITH
ø .59” (15 + 0.1 mm) Panel hole TWILOCK SYSTEM*
ø .78” (20 + 0.1 mm)
Panel Connector, Male Thread, Front Mounting Type Part Number M16
Short version
1.02” (26 mm) M16 x 0.75 .78” (20 mm) 4 x holes Ø 2.7 mm (.11“) ....................S7.840.200.000
.55” (14 mm) .47” (12 mm) Flange 20 x 20 mm
ø 2.7 mm
*ALSO MATES WITH
.78” .59” (15 mm) TWILOCK SYSTEM*
(20 mm) Panel hole
ø .59” (15 mm) Type Part Number
300° rotatable, locking screw at flange
ø .59” (15.2 + 0.1 mm) 4 x holes Ø 2.7 mm (.11“) ....................S7.843.000.000
Flange 20 x 20 mm
Right Angle Panel Connector, Male Thread, Rotatable
4 x holes Ø 2.7 mm (.11“) ....................S7.843.100.000
1.62” (41.2 mm) .78” (20 mm) .98” (25 mm) Flange 25 x 25 mm
1.43” (36.5 mm) .59” (15 mm) ø 2.7 mm Optional: Flat gasket....STAD1-7P2510
1.24” (31.7 mm)
1.12” (28.5 mm) ø 2.7 *ALSO MATES WITH
mm TWILOCK SYSTEM*
M16 x 0.75
Panel hole .78” (19.8 mm)
Panel hole
ø .55” (14 + 0.1 mm) ø .78” (20 + 0.1 mm)
Panel Connector, Male Thread, Front Mounting .59” (15.2 + 0.1 mm) Type Part Number
M16 x 0.75 Front mounting, single hole mounted
Thread M16 x 1.5..................................S7.842.000.000
1.22” (31 mm) .74” *ALSO MATES WITH
.23” (6 mm) .98” (25 mm) (19 mm) .61” (16.2 + 0.1 mm) TWILOCK SYSTEM*
M16 x 1.5 Panel hole
ø .61” (16.2 + 0.1 mm)
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 21
Dimensions & Specifications may be changed without prior notice
M16 CONNECTORS Type Part Number
Rear mounting, single hole mounted
HOUSINGS Including jam nut .................................S7.850.000.000
Panel Connector, Male Thread, Rear Mounting Including jam nut PG11
1.02” (26 mm) M16 x 0.75 *ALSO MATES WITH
.88” (22.5 mm) PG 11 TWILOCK SYSTEM*
.70” (17.8 + 0.1 mm).82” Type Part Number
(21 mm) .73” (18.6 + 0.1 mm) Rear mounting, 4 x thread M2.5
.86” Flange 20 x 20 mm...............................S7.845.000.000
(22 mm) Panel hole max.
*ALSO MATES WITH
.29” (7.5 mm) 11 mm TWILOCK SYSTEM*
ø .73” (18.6 + 0.1 mm) Type Part Number
Flange 20 x 20 mm
Panel Connector, Male Thread, Rear Mounting Uncoated .............................................S7.848.000.000
Surface nickel plated ...........................S7.848.000.001
1.02” (26 mm) M16 x 0.75 .78” (20 mm) Surface black conductive .....................S7.848.000.00B
.43” (11 mm) .59” (15 mm) .59” (15 mm)
*INSERT OPTIONS AVAILABLE
2.5 mm ON PAGE 26*
.78” Panel hole max. *ALSO MATES WITH
(20 mm) 6 mm TWILOCK SYSTEM*
ø .59” (15 mm)
Type Part Number
M16 ø .61” (16.2 + 0.1 mm) Flange 25 x 25 mm
Uncoated ..............................................S7.848.100.000
TWINTUS Surface nickel plated ............................S7.848.100.001
Surface black conductive .....................S7.848.100.00B
1.61” (41 mm) M16 x 0.75
*INSERT OPTIONS AVAILABLE
.78” (20 mm) .70” 1.50” ON PAGE 26*
.59” (15 mm) (18 mm) (38.2 mm)
*ALSO MATES WITH
(15ø .m59m)” 4 x 2.7 mm .86”(22 mm) TWILOCK SYSTEM*
TWINTUS
.98” (25 mm) 1.61” (41 mm) M16 x 0.75
.77” (19.8 mm)
1.50” (18 mm) (38.2 mm)
.70”
(18.ø1.7m1”m) 4 x 2.7 mm .86”(22 mm)
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
22 Dimensions & Specifications may be changed without prior notice
TWINTUS M16 / M12 1.61” (41 mm) M12 x 1 M16 CONNECTORS
TWINTUS M16 / M12 M16 x 0.75
.78” (20 mm) (18 mm) (45 mm) HOUSINGS
.59” (15 mm) 1.77”
Type Part Number
.70” Flange 20 x 20 mm
Uncoated .............................................S7.848.200.000
(15ø .m59m)” 4 x 2.7 mm .86”(22 mm) Surface nickel plated ...........................S7.848.200.001
Surface black conductive .....................S7.848.200.00B
1.61” (41 mm) M12 x 1
M16 x 0.75 *INSERT OPTIONS AVAILABLE
.98” (25 mm) .70” 1.77” ON PAGE 26*
.77” (19.8 mm) (18 mm) (45 mm)
*ALSO MATES WITH
(18.ø1.7m1”m) 4 x 2.7 mm .86” (22 mm) TWILOCK SYSTEM*
Type Part Number
Flange 25 x 25 mm
Uncoated .............................................S7.848.300.000
Surface nickel plated ...........................S7.848.300.001
Surface black conductive .....................S7.848.300.00B
*INSERT OPTIONS AVAILABLE
ON PAGE 26*
*ALSO MATES WITH
TWILOCK SYSTEM*
M16
Plastic protective cap for connectors Brass protective cap with chain for
with male thread............S7.000.980.161 connectors with female thread
with female thread ........S7.000.980.162 Length 70 mm..................S7.010.9S0.705*)
Brass protective cap for connectors with Brass protective cap with chain
female thread ..............S7.010.900.163*) for connectors with male thread
Length 70 mm....................S7.010.9S0.704
Brass protective cap for connectors with
male thread....................S7.010.900.162 Crimp tool for manual crimping of machined
crimp contacts for signal connectors
Adaptor flange M16 and M23....................S7.000.900.904
for Straight Connectors..S7.010.900.135
Plastic protective cap for TWINTUS
Conduit adaptor TWINTUS M16...................S7.000.848.101
Nylon DN 10...................S7.010.900.200 TWINTUS M16 / M12.........S7.000.848.102
Nylon DN 12...................S7.010.900.202
Screw Tool, adjustable 0.5 - 1.7 Nm .........
..........................................S7.010.900.190
Tool Adapter for tightening or loosening Disassembly Tool
knurled nuts for M12 Power / M16 ........... for crimp contacts 1.25 mm...S7.010.900.151
.........................................S7.010.900.191
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 *) No compatibility with TWILOCK
Dimensions & Specifications may be changed without prior notice
23
M16 CONNECTORS Type Part Number Part Number
INSERTS
Inserts 3-pole (3 x 1 mm)
.05” (1.4 mm) Pins Sockets
.11” (2.8 mm) Insert without contacts...............S7.003.903.101 ..............S7.003.903.102
Insert with dip solder contacts
Length 10 mm.............................S7.001.903.127 ..............S7.001.903.108
Insert Pin Mating View Insert Socket Mating View .18” (4.8 mm) Insert with dip solder contacts
.18” (4.8 mm) Length 17 mm.............................S7.001.903.137 ..............S7.001.903.118
Required Contacts
3 x 1 mm ...............................S7.010.901.001...S7.010.901.002/7.010.901.012
Inserts 3-pole (3 x 2 mm) Type Part Number Part Number
.05” (1.4 mm) Pins Sockets
.11” (2.8 mm) Insert without contacts................S7.003.983.101 .............S7.003.983.102
Insert with dip solder contacts
Length 10 mm.............................S7.001.983.127 ..............S7.001.983.108
Insert with dip solder contacts
Length 17 mm.............................S7.001.983.137 ..............S7.001.983.118
Insert Pin Mating View Insert Socket Mating View Required Contacts
3 x 2 mm ....................................S7.010.982.001 ..............S7.010.982.002
M16 Inserts 4+3+PE, 320 V Type Part Number Part Number
Pins Sockets
Insert without contacts...............S7.003.943.101 ..............S7.003.943.102
.29” (7.6 mm) .29” (7.6 mm) Insert RAL 2003 (DESINA orange)
.17” (4.5 mm) .17” (4.5 mm) without contacts ........................S7.053.943.101 ..............S7.053.943.102
Insert with dip solder contacts
Length 10 mm.............................S7.001.943.127 ..............S7.001.943.108
Insert with dip solder contacts
Length 17 mm.............................S7.001.943.137 ..............S7.001.943.118
Insert Pin Mating View Insert Socket Mating View Required Contacts
4 x 0.8 mm .................................S7.010.980.801 .............S7.010.980.802
4 x 1.6 mm .................................S7.010.981.601 ..............S7.010.981.602
Inserts 4+3+PE, 600 V Type Part Number Part Number
Pins Sockets
Insert without contacts...............S7.003.908.101*...........S7.003.908.102*
.29” (7.6 mm) Insert RAL 2003 (DESINA orange)
.17” (4.5 mm) without contacts ........................S7.053.908.101*...........S7.053.908.102*
.29” (7.6 mm) Insert with dip solder contacts - Under Development
.17” (4.5 mm) Length 10 mm.............................S7.001.908.127 ..............S7.001.908.108
Insert with dip solder contacts - Under Development
Length 17 mm.............................S7.001.908.137 ..............S7.001.908.118
Insert Pin Mating View Insert Socket Mating View Required Contacts
4 x 0.8 mm ................................S7.010.980.811 ..............S7.010.980.812
4 x 1.25 mm ..............................S7.010.981.211 ..............S7.010.981.212
*Disassembly tool required for removing 1.25 mm contacts...S7.010.900.151
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
24 Dimensions & Specifications may be changed without prior notice
M16 CONNECTORS
INSERTS
Inserts 6+PE Type Part Number Part Number
Pins Sockets
Insert without contacts..............S7.003.961.101* ..........S7.003.961.102*
Insert RAL 2003 (DESINA orange)
without contacts .......................S7.053.961.101* ..........S7.053.961.102*
ø .29” (7.5 mm)
1 5 5 1 Insert with dip solder contacts - Under Development
6 4 6 2 Length 10 mm ..........................S7.001.961.127 ...............S7.001.961.108
2 4 3 Insert with dip solder contacts - Under Development
3 6 x 60°
Insert Pin Mating View Insert Socket Mating View Length 17 mm ..........................S7.001.961.137 ...............S7.001.961.118
Required Contacts
7 x 1.25 mm .............................S7.010.981.211 ...............S7.010.981.212
*Disassembly tool required for removing 1.25 mm contacts...S7.010.900.151
Inserts 10-pole Type Part Number Part Number
Pins Sockets
Insert without contacts...............S7.003.910.101 ..............S7.003.910.102
.27” (6.9 mm) Insert RAL 2003 (DESINA green)
.11” (2.9 mm) without contacts ........................S7.053.910.101 ..............S7.053.910.102
.27” (6.9 mm) Insert with dip solder contacts
.11” (2.9 mm) Length 10 mm............................S7.001.910.127 ..............S7.001.910.108
Insert with dip solder contacts M16
Length 17 mm............................S7.001.910.137 ..............S7.001.910.118
Insert Pin Mating View Insert Socket Mating View
Required Contacts
10 x 1 mm .................................S7.010.981.001 ..............S7.010.981.002
Inserts 12+3-pole Type Part Number Part Number
Pins Sockets
Insert without contacts..............S7.003.985.101 ..............S7.003.985.102
ø .35” (9 mm)
ø .14” (3.6 mm) Insert with dip solder contacts
Length 10 mm............................S7.001.985.127 .............S7.001.985.108
3 x 120° Insert with dip solder contacts
12 x 30° Length 17 mm............................S7.001.985.137 .............S7.001.985.118
Insert Pin Mating View Insert Socket Mating View Required Contacts
12 x 0.8 mm ..............................S7.010.980.801..............S7.010.980.802
Inserts 18-pole 3 x 1.25 mm ..............................S7.010.981.201..............S7.010.981.202
*Disassembly tool required for removing 1.25 mm contacts...S7.010.900.151
Type Part Number Part Number
.09” (2.3 mm) Pins Sockets
12 x 30° Insert without contacts..............S7.003.988.101 ..............S7.003.988.102
.06” (1.6 mm)
.02” (0.6 mm) Insert RAL 2003 (DESINA green)
without contacts .......................S7.053.988.101 ..............S7.053.988.102
.19” (4.9 mm)
.15” (3.9 mm) Insert with dip solder contacts
.08” (2.2 mm) Length 10 mm............................S7.001.988.127 .............S7.001.988.108
Insert Pin Mating View Insert Socket Mating View ø .35” (9 mm) Insert with dip solder contacts
Length 17 mm............................S7.001.988.137 .............S7.001.988.118
Required Contacts
18 x 0.8 mm ..............................S7.010.980.801 .............S7.010.980.802
*Under Development
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 25
Dimensions & Specifications may be changed without prior notice
M16 CONNECTORS Type Part Number
INSERTS,CONTACTS
Inserts M12 for TWINTUS M16 / M12 (8-pole)
21 Pins
38 Insert with solder contacts.......................................SA712-7.001.908.103
47
Type Part Number
56
Insert Pin Mating View
Inserts M12 for TWINTUS M16 / M12 (12-pole)
21 Pins
3 10 9 Insert with solder contacts.......................................SA712-7.001.912.103
4 11 12 8
5 7
6
Insert Pin Mating View
Contacts Type Crimp Range Part Number
M16 Crimp pin 0.8 mm, machined.......................0.08 – 0.34 mm2 (AWG 28 – 22)...............S7.010.980.801
Crimp socket 0.8 mm, machined.................0.08 – 0.34 mm2 (AWG 28 – 22)...............S7.010.980.802
Crimp pin 0.8 mm, machined.......................0.08 – 0.34 mm2 (AWG 28 – 22)...............S7.010.980.811
Crimp socket 0.8 mm, machined.................0.08 – 0.34 mm2 (AWG 28 – 22)...............S7.010.980.812
Crimp pin 1 mm, machined...........................0.08 – 0.75 mm2 (AWG 28 – 18)...............S7.010.981.001
Crimp socket 1 mm, machined ....................0.08 – 0.75 mm2 (AWG 28 – 18)...............S7.010.981.002
Crimp pin 1 mm, machined..............................0.14 – 1 mm2 (AWG 26 – 17)..................S7.010.901.001
Crimp socket 1 mm, machined.....................0.08 – 0.56 mm2 (AWG 28 – 20)...............S7.010.901.012
Crimp socket 1 mm, machined........................0.34 – 1 mm2 (AWG 22 – 17)..................S7.010.901.002
Crimp pin 1.25 mm, machined.......................0.5 – 1.5 mm2 (AWG 20 – 16)..................S7.010.981.201
Crimp socket 1.25 mm, machined ................0.5 – 1.5 mm2 (AWG 20 – 16)..................S7.010.981.202
Crimp pin 1.25 mm, machined......................0.34 – 1.5 mm2 (AWG 20 – 16).................S7.010.981.211
Crimp socket 1.25 mm, machined................0.34 – 1.5 mm2 (AWG 20 – 16).................S7.010.981.212
Crimp pin 1.6 mm, machined........................0.34 – 1.5 mm2 (AWG 22 – 16).................S7.010.981.601
Crimp socket 1.6 mm, machined..................0.34 – 1.5 mm2 (AWG 22 – 16).................S7.010.981.602
Crimp pin 2 mm, machined............................1.0 – 2.5 mm2 (AWG 17 – 14)...................S7.010.982.001
Crimp socket 2 mm, machined.......................1.0 – 2.5 mm2 (AWG 17 – 14)..................S7.010.982.002
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
26 Dimensions & Specifications may be changed without prior notice
M23 POE CONNECTORS Mechanical Data Materials and Technical Data
POWER OVER ETHERNET Housing Copper-Zinc alloy
Die Cast
The M23 PoE connector is capable of CAT 7 and capable of Housing surface Nickel plated
transmitting up to a gigabit. A hybrid connector with four Twinax Inserts (for contacts) PBT UL-94 V0, PA6
inserts for data transfer all in a single cable solution. Designed Contacts Brass alloy
for use in rough industrial environments, the robust durability Contact surface at point of contact Nickel and gold plated (0.25 μm)
will withstand many applications while also having 5 separate Minimum mating cycles >1000
shieldings to prevent cross talk. Seals / O-Rings Perbunnan NBR (Standard)
Temperature range -40°F – 257°F (-40°C – 125°C)
Type of contacts Crimp, dip-solder (PCB)
Protection IP 67 per EN 60 529 (connected)
Cable diameter range .43 – .67“ (11 - 17 mm)
Electrical Data 20 (4 x 2 + 12) 12
Number of positions 4x2 1
Number of contacts (26 - 16 )
Contact-Ø [mm] 0.6 0.14 - 1/1.5 mm
AWG [mm2] (28 - 22 ) 8
0.8 - 0.34 mm
Nominal current [A] 2 160
Nominal voltage [V~] degree of protection 3 1500
Test voltage (Breakdown voltage) [V~] 60 >106
Insulation resistance [MΩ] 500 3
Max. contact resistance [mΩ] >106
Impedance [Ω] (at 100MHz) 3 -
100
Components Needed For A Complete M23 PoE Connector:
M23 PoE
- HOUSING (pg 29)
- INSERT (pg 30)
- CONTACTS (if crimp contact insert is selected) (pg 30)
See Technical Information page 78
*Assembly Instructions can be found at www.SealconUSA.com or by calling us at 1-800-456-9012
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
28 Dimensions & Specifications may be changed without prior notice
M23 POE CONNECTORS
HOUSINGS
Straight Female Connector Cable-Ø Part Number
11-17 mm (.43 - .66”)............................S7.108.600.000
3.00” (76.3 mm)
ø 1.06” (27 mm)
.94” .94” 1.06”
(24 mm) (24 mm) (27 mm)
Straight Connector, Male Thread Cable-Ø Part Number
11-17 mm (.43 - .66”)............................S7.208.600.000
2.94” (74.9 mm)
M23 x 1
.94” .94”
(24 mm) (24 mm)
Right Angle Connector, Female Thread , Rotatable Cable-Ø Part Number
3.06” (77.8 mm) 11-17 mm (.43 - .66”)............................S7.308.600.000
.94” .98” 2.76” (70.2 mm)
(24 mm) (25 mm)
M23 PoE
Panel Connector, Male Thread, Front Mounting 1.06”
(27 mm)
1.06”
(27 mm)
ø 1.06” (27 mm)
Type Part Number
4 x holes Ø 2.7 mm (.11“)......................S7.408.000.000
Flange 26 x 26 mm
1.11” (28.4 mm) M23 x 1 ø 2.7 mm
1.04” (26.5 mm)
.77” (19.8 mm) Panel hole
ø .88” (22.5 + 0.1 mm)
Panel Connector, Rear Mounting 1.09” (27.7 mm) Type Part Number
1.02” (26 mm) 4 x holes Ø 3.2 mm (.13“).....................S7.468.000.000
M23 x 1 Flange 26 x 26 mm
.80” (20.5 mm)
ø 3.2 mm
ø .90” (23.1 + 0.1 mm) 29
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
Dimensions & Specifications may be changed without prior notice
M23 POE CONNECTORS
INSERTS, CONTACTS, ACCESSORIES
Inserts (4 x 2) + 12 Type Part Number Part Number
Pins Sockets
Insert without contacts.................S7.003.920.101...............S7.003.920.102
Insert with dip solder contacts......S7.001.920.107...............S7.001.920.108
Insert Pin Mating View Insert Socket Mating View Required Contacts
8 x 0.6 .........................................S7.010.980.641...............S7.010.980.602
12 x 1 ..........................................S7.010.901.045...............S7.010.901.002
.....................................................S7.010.901.049...............S7.010.901.012
.............................................................................................S7.010.901.022
.............................................................................................S7.010.901.046
Contacts Type Crimp Range Part Number
Crimp pin 0.6 mm, machined ...........0.08 – 0.34 mm² (AWG 28 - 22)...........S7.010.980.641
Crimp socket 0.6 mm, machined.......0.08 – 0.34 mm² (AWG 28 - 22)..........S7.010.980.602
Crimp pin 1 mm, machined..................0.14 – 1 mm² (AWG 26 - 17).............S7.010.901.049
...........................................................0.75 – 1.5 mm² (AWG 18 - 16)...........S7.010.901.045
Crimp socket 1 mm, machined..........0.08 – 0.56 mm² (AWG 28 - 20)..........S7.010.901.012
............................................................0.34 – 1 mm² (AWG 22 - 17).............S7.010.901.002
...........................................................0.75 – 1.5 mm² (AWG 18 - 16)...........S7.010.901.022
............................................................1 – 1.75 mm² (AWG 17 - 15).............S7.010.901.046
M23 PoE Plastic protective cap for connectors Brass protective cap with chain for
with male thread...........S7.000.900.101 connectors with female thread
with female thread .......S7.000.900.102 Length 70 mm......................S7.010.9S0.783
Length 100 mm....................S7.010.9S1.083
Brass protective cap for connectors with
female thread.................S7.010.900.183 Adaptor flange
for Moulded Connectors........S7.010.900.139
Brass protective cap for connectors with
male thread....................S7.010.908.102 Multi-Bus adapter wired through I:I (excentric)
Adaptor flange Multi-Bus I, Female Thread, Sockets 17pole
for Straight Connectors..S7.010.900.128 Multi-Bus II, Male Thread, Pins........................
..............................................S7.010.900.143
Conduit adaptor
Nylon Conduit DN 12......S7.010.900.205 Multi-Bus I, Female Thread, Pins, 17pole
Nylon Conduit DN 14......S7.010.900.207 Multi-Bus II, Male Thread, Sockets .................
Nylon Conduit DN 17.......S7.010.900.209 ..............................................S7.010.900.144
Control Cabinet adapter Manual Crimp tool for EMC sleeves M23
for Multibus II – AIDA Fast Ethernet .......................S7.000.900.906
Rear Mounting, central locking ............
.......................................S7.010.900.145 Manual Crimp tool
for turned contacts M23 Fast Ethernet .........
I / O adapter module to scan or feed .............................................S7.000.900.907
signals Rear Mounting, central locking ...
.......................................S7.010.900.146
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
30 Dimensions & Specifications may be changed without prior notice
M23 RJ45 CONNECTORS
SAFE DATA TRANSFERS
The M23 RJ45 is built for industrial environments Mechanical Data Materials and Technical Data
with CAT 5, 5e and CAT 6a capabilities. With the
proper patch cable, they can be directly integrated Housing Brass Alloy
into the body of the connector. With a screw lock Die Cast
system, these connectors are also suitable as a Housing surface Nickel plated
maintenance interface and include a built in cable Inserts (for contacts) PBT UL-94 V0, PA 6
gland. The system achieves a IP 67 / IP 69 K Contacts Brass Alloy
protection class. Contact surface at point of contact Depends On RJ45 Type Used
Seals / O-Rings NBR / FKM
Temperature range Depends On RJ45 Type Used
Degree of Protection IP 67 per EN 60 529 (mated)
Cable diameter range 3 – 7 / 7 – 12 / 11 – 17 mm
Number of Positions 4 / 6 / 8 poles, optional 4 + 2 / 6 + 2 / 8 + 2
Nominal Current 1) [A] Depends On RJ45 Type Used
Nominal Voltage 2) [V~] Depends On RJ45 Type Used
Test Voltage [V~] Depends On RJ45 Type Used
Insulation Resistance [MΩ] Depends On RJ45 Type Used
Max. Crossover Resistance [mΩ] Depends On RJ45 Type Used
Max. Data Rate Depends On RJ45 Type Used
Components Needed For A Complete M23 RJ45 Connector:
- HOUSING (pg 33 - 35)
- INSERT Included
M23 RJ45
See Technical Information page 78
*Assembly Instructions can be found at www.SealconUSA.com or by calling us at 1-800-456-9012
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
32 Dimensions & Specifications may be changed without prior notice
M23 RJ45 CONNECTORS
HOUSINGS
Straight Connector Female Thread Cable-Ø Part Number
2.73” (69.5 mm) 3 – 7 mm (.12 - .28”).............................S7.R10.400.000
Connector with insert for patch cable
ø 1.07” (27.2 mm) Suitable patch cable and plugs can be recommended.
.94” .94” *NOTE: MUST USE YAMAICHI
(24 mm) (24 mm) Y-CON SQUARE PLUG -
SEE PAGE 35*
Straight Connector Male Thread Cable-Ø Part Number
3 – 7 mm (.12 - .28”)............................S7.R20.408.000
Incl. 8 poles coupler, fully occupied
3.11” (79 mm)
M23 x 1 *FEMALE / FEMALE COUPLER*
.94” .94”
(24 mm) (24 mm)
Panel Connector Front Mount, dip solder insert Type Part Number
4 holes 2.7 mm, Flange.........................S7.R40.008.000
M23 x 1 Incl. 8 poles dip solder insert
.74” (19 mm) ø 2.7 mm
.98” (25 mm) 4 holes 2.7 mm, Flange.........................S7.R40.082.000
Incl. 8 + 2 poles dip solder insert
.77” (19.8 mm)
Panel hole
ø .90” (23 + 0.1 mm)
Panel Connector, Front Mount Type Part Number
with vibration protection
M23 x 1 4 holes 2.7 mm, Flange.........................S7.R41.008.000
1.35” (34.5 mm) Incl. 8 poles coupler, fully occupied
.98” (25 mm) ø 2.7 mm M23 RJ45
*FEMALE / FEMALE COUPLER*
.77” (19.8 mm) Panel hole
ø .78” (20 + 0.1 mm)
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 33
Dimensions & Specifications may be changed without prior notice
M23 RJ45 CONNECTORS Type Part Number
Front Mount
HOUSINGS M20 x 1.5 thread .................................S7.R42.008.000
Incl. 8 poles coupler, fully occupied
Single Hole Panel Connector - Front Mount Optional: Gasket M20 x 1.5, Locking Nut
M20 x 1.5 *FEMALE / FEMALE COUPLER*
M23 x 1
Type Part Number
.75” Rear Mount
(19.1 + 0.1 mm) M25 x 1.5 thread ................................S7.R50.008.000
1.65” (42 mm) Incl. 8 poles coupler, fully occupied
.23” (6 mm) 1.41” (36 mm) M25 x 1.5 Locking Nut included.
.94” .79” (20.2 + 0.1 mm) *FEMALE / FEMALE COUPLER*
(24 mm) Panel hole
.79” (20.2 + 0.1 mm)
Single Hole Panel Connector - Rear Mount M23 x 1
M25 x 1.5
1.35” (34.5 mm) .94” (24.1 + 0.1 mm)
1.25” (32 mm)
.98” (25 + 0.1 mm)
1.18” 1.14” Panel hole max.
14 mm
(30 mm) (29 mm)
.98” (25 + 0.1 mm)
Right Angle Panel Connector, Male Thread, flange - .77” (19.8 mm) Type Part Number
300° rotatable, locking screw at flange
2.93” (74.5 mm) 4 holes 2.7 mm, Flange.......................S7.R43.108.000
Incl. 8 poles coupler, fully occupied
.98” (25 mm) Optional: Flat gasket....TAD1-7P2510
1.57” (40 mm)
.09” (2.5 mm) Simple installation with M2.5 screws
ø .96” (24.5 mm) .10” (2.75 mm) *FEMALE / FEMALE COUPLER*
.98” (25 mm)
ø .78” (20 + 0.1 mm)
Panel Connector with strain relief - Rear Mount - Dip Solder Insert Type Part Number
with vibration protection
M23 RJ45 .82” (21 mm)M23 x 1 M3 4 x M3 thread, Flange .........................S7.R45.008.000
.74” (19 mm) Incl. 8 poles dip solder insert
.98” (25 mm) Panel hole
.80” (20.5 mm) ø .90” (23 + 0.1 mm) 4 x M3 thread, Flange .........................S7.R45.082.000
Incl. 8 + 2 poles dip solder insert
*)Upon Request
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
34 Dimensions & Specifications may be changed without prior notice
M23 RJ45 CONNECTORS
HOUSINGS, ACCESSORIES
Panel Connector with strain relief - Rear Mount Cable-Ø Part Number
3.11” (79.2 mm) Single Hole, Rear Mount, M25 x 1.5 thread
1.78” (45.4 mm) 1.30” (33.8 mm) 3 – 7 mm (.12 - .28”)...........................S7.R52.408.000
M23 x 1 Incl. 8 poles coupler, fully occupied
M25 x 1.5 M25 x 1.5 Locking Nut included
.94” 1.18” 1.14” Panel hole max.
(24 mm) (30 mm) (29 mm) 14 mm
ø .98” (25 + 0.1 mm)
Panel Connector, Front Mount Cable-Ø Part Number
3.11” (79 mm) M23 x 1 M2.5 4 x M2.5 thread, Flange, Rear Mount
2.12” (54 mm) .98” (25 mm) .98” (25 mm) 3 – 7 mm (.12 - .28”)...........................S7.R47.408.000
.80” (20.5 mm) Incl. 8 poles coupler, fully occupied
.94” Panel hole max.
(24 mm) 7 mm
ø .90” (23 + 0.1 mm)
Plastic protective cap for connectors Brass protective cap with chain for M23 RJ45
with male thread............S7.000.900.101 connectors with female thread
with female thread ........S7.000.900.102 Length 70 mm.....................S7.010.9S0.783
Length 100 mm...................S7.010.9S1.083
Brass protective cap for connectors with
female thread ................S7.010.900.183 Brass protective cap with chain
for connectors with male thread
Brass protective cap for connectors with Length 70 mm.....................S7.010.9S0.702
male thread....................S7.010.900.102 Length 100 mm...................S7.010.9S1.002
Adaptor flange Suitable patch cable....................on request
for Straight Connectors...S7.010.900.128
Field attachable RJ45 Yamaichi Plug
Conduit adaptor 8-pole.......CAT 5....................SA7RJ-081M41
Nylon Conduit DN 12......S7.010.900.205 8-pole.......CAT 6a..................SA7RJ-081M6A
Nylon Conduit DN 14.......S7.010.900.207 8+2-pole.......(PICTURED).......SA7RJ-821M51
Nylon Conduit DN 17.......S7.010.900.209
Screw Tool, adjustable 0.5 - 1.7 Nm .........
Tool Adapter for tightening or loosening ..........................................S7.010.900.190
knurled nuts for M23 ..............................
.......................................S7.010.900.192
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 35
Dimensions & Specifications may be changed without prior notice
M23 SIGNAL CONNECTORS M23 Signal
DESIGNED WITH 6-19 POSITIONS
Mechanical Data Materials and Technical Data The M23 Signal connector is reliable and universally
accepted within the connectivity industry. With
Housing Copper-Zinc alloy many pin-out configurations and housing styles,
Die Cast the M23 signal has an option for your application.
Housing surface Available in many locking styles including screw lock,
Nickel plated Twilock 1/4 turn system, and Twilock-S which mates
Inserts (for contacts) Other surface upon request to Speedtec® by Intercontec / Tyco.
Thermoplastic Polyamide PA 6 (Nylon 6/6), PBT
Contacts Fire protection class V-0
Contact surface at point of contact Brass alloy
Minimum mating cycles Nickel and gold plated (0.25 μm)
Seals / O-Rings > 1000*) *)Sealcon to Sealcon connector
Buena-N standard
Temperature range Optional FKM
Type of contacts -40°F – 257°F (-40°C – 125°C)
Protection Crimp, solder, dip-solder (PCB)
IP 67 / IP 69K per EN 60 529 (connected),
Cable diameter range NEMA 4x
.12 – .67“ (3 - 17 mm)
Electrical Data 6 7 9 (8 + 1) 12 16 17 19 (16 + 3)
Number of positions 6 7 81 12 16 17 16 3
2 2 12 1 1 1 1 1.5
Number of contacts 20 20 8 20 8 8 8 8 10
Contact-Ø [mm] 300 300 200 160 160
Nominal current [A] 200 100
Nominal voltage [V~] degree of 2500 2500 2500 1500 1500
protection 3 > 1010 > 1010 2500 > 1010 > 106 > 106 1500
Test voltage (Breakdown voltage) [V~] > 1010 > 106
Insulation resistance [MΩ] 3 3 3 3 3
3 3
Max. contact resistance [mΩ]
Components Needed For A Complete M23 Signal Connector: Connection System Types
- HOUSING (pg 38 - 43) THREADED TWILOCK 1/4 Turn TWILOCK-S*
- INSERT (pg 44 - 47)
- CONTACTS (if crimp contact insert is selected) (pg 48)
*Intermateable
with Speedtec
See Technical Information page 78
*Assembly Instructions can be found at www.SealconUSA.com or by calling us at 1-800-456-9012
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 37
Dimensions & Specifications may be changed without prior notice
M23 Signal M23 SIGNAL CONNECTORS
HOUSINGS
Straight Connector, Female Thread Cable-Ø Part Number
2.54” (64.7 mm) 3 – 7 mm (.12 – .28“) ...........................S7.106.400.000
7 – 12 mm (.28 – .47“) .........................S7.106.500.000
ø 1.07” (27.2 mm) 11 – 17 mm (.44 – .67“) .......................S7.106.600.000
.94” .94”
(24 mm) (24 mm)
Straight Connector, Female Thread TWILOCK / TWILOCK-S* - Quick Connect Cable-Ø Part Number
2.73” (69.4 mm) 3 – 7 mm (.12 – .28“) ...........................S7.166.400.000
7 – 12 mm (.24 – .47“) .........................S7.166.500.000
ø 1.10” (28 mm) 11 – 17 mm (.43 – .67“) .......................S7.166.600.000
.94” .94” *Intermateable with Speedtec (Twilock-S)
(24 mm) (24 mm) 3 – 7 mm (.12 – .28“) ...........................S7.166.400.00S
7 – 12 mm (.24 – .47“) .........................S7.166.500.00S
11 – 17 mm (.43 – .67“) .......................S7.166.600.00S
Straight Connector, Male Thread TWILOCK / TWILOCK-S* - Quick Connect Cable-Ø Part Number
2.62” (66.7 mm) 3 – 7 mm (.12 – .28“) ...........................S7.206.400.000
7 – 12 mm (.28 – .47“) .........................S7.206.500.000
*ALSO MATES WITH 11 – 17 mm (.44 – .67“) .......................S7.206.600.000
TWILOCK SYSTEM*
Panel Connector, Male Thread, with Strain Relief M23 x 1 *Intermateable with Speedtec (Twilock-S)
3 – 7 mm (.12 – .28“) ...........................S7.266.400.00S
7 – 12 mm (.24 – .47“) .........................S7.266.500.00S
11 – 17 mm (.43 – .67“) .......................S7.266.600.00S
Cable-Ø Part Number
M23 x 1 4 threads M3, rear mounting
ø 1.02” (26 mm) 3 – 7 mm (.12 – .28“) ...........................S7.476.400.000
7 – 12 mm (.28 – .47“) .........................S7.476.500.000
ø 3.2 mm 11 – 17 mm (.44 – .67“) .......................S7.476.600.000
1.72” (43.8 mm) .96” (24.6 mm) 1.11” (28.4 mm) Optional: Flat gasket
2.82” (71.8 mm) 1.37” (35 mm) *ALSO MATES WITH
Panel hole TWILOCK SYSTEM*
1.04” (26.5 + 0.2 mm)
Panel Connector, Male Thread, with Strain Relief TWILOCK / TWILOCK-S* Cable-Ø Part Number
- Quick Connect
Rear mounting, M25 x 1.5 single hole mounted
2.62” (66.7 mm) 3 – 7 mm (.12 – .28“) ...........................S7.486.400.000
1.60” (40.7 mm) 1.02” (26 mm) 7 – 12 mm (.28 – .47“) .........................S7.486.500.000
11 – 17 mm (.44 – .67“) .......................S7.486.600.000
.94” (24 mm)
M23 x 1 Panel hole max. *Intermateable with Speedtec (Twilock-S)
M25 x 1.5 8 mm 3 – 7 mm (.12 – .28“) ...........................S7.486.400.00S
7 – 12 mm (.24 – .47“) .........................S7.486.500.00S
.94” ø .98” (25 + 0.1 mm) 11 – 17 mm (.43 – .67“) .......................S7.486.600.00S
(24 mm) ø 1.18” (30 mm)
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
38 Dimensions & Specifications may be changed without prior notice
M23 SIGNAL CONNECTORS M23 Signal
HOUSINGS
Right Angle Connector, Female Thread with positioning Cable-Ø Part Number
2.68” (68.3 mm) 3 – 7 mm (.12 – .28“) ........................S7.300.300.000
5 – 10 mm (.20 – .39“) ......................S7.300.400.000
.86” 7 – 12 mm (.28 – .47“) ......................S7.300.500.000
(22 mm) .94” 10 – 14 mm (.39 – .55“) ....................S7.300.600.000
(24 mm)
.94” (24 mm)
1.96” (50 mm)
ø 1.07” (27.2 mm) Cable-Ø Part Number
Right Angle Connector, Female Thread, EMC with positioning 7 – 12 mm (.28 – .47“) ......................S7.301.500.000
10 – 14 mm (.39 – .55“) ....................S7.301.600.000
2.89” (73.5 mm)
.94” .94” 2.04” (52 mm)
(24 mm) (24 mm)
.94”
(24 mm)
ø 1.07” (27.2 mm)
Right Angle Connector, EMC, rotatable Cable-Ø Part Number
2.89” (77.7 mm) 7 – 12 mm (.28 – .47“) ......................S7.306.500.000
11 – 17 mm (.43 – .67“) ....................S7.306.600.000
.94” .98” 2.36” (60 mm)
(24 mm) (25 mm)
1.06”
(27 mm)
ø 1.07” (27.2 mm)
Panel Connector, Male Thread, Front Mounting Type Part Number
4 holes Ø 3.2 mm (.13“)....................S7.400.000.000*)
.88” (22.5 mm) M23 x 1 4 threads M3....................................S7.402.000.000*)
.84” (21.5 mm) Optional: Flat gasket....STAD2-7P2510
.98” (25 mm) ø 2.7 / ø 3.2
.77” (19.8 mm) M2.5 / M3 4 holes Ø 2.7 mm (.11“)...................S7.404.000.000*)
4 threads M2.5 ................................S7.406.000.000*)
Panel hole Optional: Flat gasket....STAD1-7P2510
ø .77” (19.8 mm) ø .78” (20 + 0.1 mm)
Panel Connector, Male Thread, Front Mounting TWILOCK / TWILOCK-S* Type Part Number
- Quick Connect With anti-vibration O-Ring
4 holes Ø 3.2 mm (.13“)......................S7.410.000.000
.88” (22.5 mm) M23 x 1 ø 2.7 / ø 3.2 4 threads M3....................................S7.412.000.000*)
.84” (2.1.958” (m2m5) mm)ø .77” (19.8 mm) M2.5 / M3 Optional: Flat gasket....STAD2-7P2510
4 holes Ø 2.7 mm (.11“)......................S7.414.000.000
.77” (19.8 mm) Panel hole 4 threads M2.5 ................................S7.416.000.000*)
Optional: Flat gasket....STA12-7P2510
ø .78” (20 + 0.1 mm)
*Intermateable with Speedtec (Twilock-S)
4 x holes 3.2 mm, Flange 25 x 25 ......S7.410.000.00S
Optional: Flat gasket....STAD2-7P2510
4 x holes 3.2 mm, Flange 28 x 28 ......S7.410.100.00S
*) No compatibility with TWILOCK
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 39
Dimensions & Specifications may be changed without prior notice
M23 Signal M23 SIGNAL CONNECTORS Type Part Number
Without coding option
HOUSINGS 4 holes Ø 3.2 mm (.13“).....................S7.440.000.000
Optional: Flat gasket....STAD2-7P2510
Panel Connector, Female Thread, with knurled Nut
ø 1.07 (27.2 mm)
ø .77 (19.8 mm)
1.16” (29.7 mm) ø 2.7 / ø 3.2
.72” (18.5 mm) M2.5 / M3
.98” (25 mm)
.77” (19.8 mm) Panel hole 4 holes Ø 2.7 mm (.11“).....................S7.444.000.000
Optional: Flat gasket....STAD1-7P2510
ø .78” (20 + 0.1 mm)
Panel Connector, Female Thread, with knurled Nut, positionable Type Part Number
With coding option (8 x 45°)
ø 1.07 (27.2 mm) 4 holes Ø 3.2 mm (.13“).....................S7.448.000.000
1.30” (33.2 mm) Optional: Flat gasket....STAD2-7P2510
.72” (18.5 mm) ø 2.7 / ø 3.2
M2.5 / M3 4 holes Ø 2.7 mm (.11“).....................S7.449.000.000
.98” (25 mm) Optional: Flat gasket....STAD1-7P2510
.77” (19.8 mm) Panel hole
ø .77” (19.8 mm) ø .78” (20 + 0.1 mm)
Panel Connector, Male Thread, Single Hole Mounted .92” (23.5 mm) .75” (19.1 + 0.1 mm) Type Part Number
.75” (19.3 + 0.1 mm) Front mounting for male inserts
M23 x 1 Thread M20 x 1.5.................................S7.420.000.000*)
Thread PG 13.5 ..................................S7.422.000.000*)
.81” (20.6 + 0.1 mm) .79” (20.2 + 0.1 mm) Optional: Flat gasket, jam nut M20 x 1.5 / PG 13.5
.94” Panel hole Panel hole * FOR MALE *
(24 mm) M20 x 1.5 INSERTS ONLY
PG 13.5 M20 x 1.5
PG 13.5 .81” (20.6 + .79” (20.2 +
0.1 mm) 0.1 mm)
Panel Connector, Male Thread, Single Hole Mounted Type Part Number
Front mounting for female inserts
M23 x 1 Thread M20 x 1.5................................S7.421.000.000*)
1.24” (31.5 mm) Thread PG 13.5 .................................S7.423.000.000*)
.75” (19.3 + 0.1 mm) Optional: Flat gasket, jam nut M20 x 1.5 / PG 13.5
.75” (19.1
+ 0.1 mm) * FOR FEMALE *
.94” .8P10an”.1e(2lm0hmo.6l)e+ .79” (20.2 + 0.1 mm) INSERTS ONLY
(24 mm) M20 x 1.5 PG 13.5 Panel hole
.81” (20.6
PG 13.5 + 0.1 mm) M20 x 1.5
.79” (20.2 +
0.1 mm)
Panel Connector, Male Thread, Single Hole Mounted Type Part Number
For insert with pins / sockets
M23 x 11.16” (29.5 mm) Thread M25 x 1.5...............................S7.425.000.000*)
.23” (6 mm) .92” (23.5 mm)
.98” (25 + 0.1 mm) Optional: Flat gasket, jam nut M25 x 1.5
.94” (24.1 +Panel hole
0.1 mm)
1.10” ø .99” (25.2 +
(28 mm) 0.1 mm)
M25 x 1.5
*) No compatibility with TWILOCK
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
40 Dimensions & Specifications may be changed without prior notice
M23 SIGNAL CONNECTORS M23 Signal
HOUSINGS
Right Angle Panel Connector, Male Thread, flange Type Part Number
4 holes 2.7 mm (.11“) .............................S7.435.000.000
2.04” (52 mm) Optional: Flat gasket....STAD1-7P2510
1.33” (34.5 mm) ø 2.7 mm
.19” (5 mm) Easy attachment with M2.5 screws
M23 x 1
.98” (25 mm) *ALSO MATES WITH
.77” (19.8 mm) TWILOCK SYSTEM*
ø .77 (19.8 mm) Panel hole Type Part Number
335° rotatable, hole mounted
ø .78” (20 + 0.1 mm) Thread M20 x 1.5.....................................S7.431.000.000
Right Angle Panel Connector, Male Thread, rotatable
2.04” (52 mm)
1.85” (47.1 mm) *ALSO MATES WITH
.29” (7.6 mm) TWILOCK SYSTEM*
M23 x 1
Panel hole
M20 x 1.5 ø .79” (20.2 + 0.1 mm)
Right Angle Panel Connector, Male Thread, rotatable, flange Type Part Number
TWILOCK / TWILOCK-S 330° rotatable, 1.5 mm locking screw at flange
4 x holes Ø 2.7 mm, Flange 25 x 25 mm..S7.439.000.000
2.28” (58.1 mm) .98” (25 mm) 1.10” (28 mm) Optional: Flat gasket....STAD1-7P2510
.77” (19.8 mm)ø 2.7.88” (22.6 mm) ø 3.2
1.64” (41.8 mm) 4 x holes Ø 3.2 mm, Flange 28 x 28 mm..S7.439.100.000
.17” (4.5 mm) mm mm
M23 x 1
*Intermatable with Speedtec (Twilock-S)
4 x holes Ø 2.7 mm, Flange 25 x 25 mm..S7.439.000.00S
Optional: Flat gasket....STAD1-7P2510
4 x holes Ø 3.2 mm, Flange 28 x 28 mm..S7.439.100.00S
Right Angle Panel Connector, Male Thread, rotatable, flange Type Part Number
300° rotatable, 1.5 mm locking screw at flange
2.04” (52 mm) .98” (25 mm) 1.10” (28 mm) 4 x holes Ø 2.7 mm .................................S7.433.000.000
.77” (19.8 mm)ø 2.7.88” (22.6 mm) ø 3.2 mm Flange 25 x 25 mm
1.61” (41.1 mm) Optional: Flat gasket....STAD1-7P2510
.09” (2.5 mm) mm
Panel hole 4 x holes Ø 3.2 mm..................................S7.433.100.000
ø .78” (20+ 0.1 mm) Flange 28 x 28 mm
Panel Connector, Male Thread, Rear Mounting *ALSO MATES WITH
TWILOCK SYSTEM*
M23 x 1.5.88” (22.5 mm) ø 2.7 / ø 3.2
.98” (25 mm) M 2.5 / M 3 Type Part Number
4 holes Ø 3.2 mm (.13“).........................S7.450.000.000*)
ø.80” (20.5 mm) Panel hole max. 4 threads M3..........................................S7.452.000.000*)
2.5 mm Optional: Flat gasket....STAD4-7P2510
4 holes Ø 2.7 mm (.11“).........................S7.454.000.000*)
ø .90” (23 + 0.1 mm) 4 threads M2.5 .....................................S7.456.000.000*)
Optional: Flat gasket....STAD3-7P2510
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 *) No compatibility with TWILOCK
Dimensions & Specifications may be changed without prior notice
41
M23 Signal M23 SIGNAL CONNECTORS
HOUSINGS
Panel Connector, Male Thread, Rear Mounting TWILOCK / TWILOCK-S* Type Part Number
- Quick Connect With anti-vibration O-Ring
4 holes Ø 3.2 mm (.13“)......................S7.460.000.000
M23 x 1.5 ø 2.7 / ø 3.2 4 threads M3.......................................S7.462.000.000
.88” (22.5 mm) M 2.5 / M 3 Optional: Flat gasket....STAD4-7P2510
ø .98” (25 mm) 4 holes Ø 2.7 mm (.11“)......................S7.464.000.000
Panel hole max. 4 threads M2.5 ..................................S7.466.000.000
.80” (20.5 mm) 2.5 mm Optional: Flat gasket....STAD3-7P2510
*Intermateable with Speedtec (Twilock-S)
ø .90” (23 + 0.1 mm) 4 threads M3......................................S7.462.000.00S
Optional: Flat gasket....STAD4-7P2510
Panel Connector, Male Thread, Single Hole Mounted TWILOCK / TWILOCK-S* ø .94” (24.1 Type Part Number
- Quick Connect + 0.1 mm) Rear mounting
Thread M25 x 1.5.............................S7.458.000.000*)
M25 x 1.5 *Intermateable with Speedtec (Twilock-S)
M23 x 1 Thread M25 x 1.5...............................S7.458.000.00S
1.16” (29.5 mm) Including jam nut M25 x 1.5
ø .98” (25 + 0.1 mm)
Type Part Number
1.18” Panel hole max. With knurled nut, rear mounting
4 threads M3.......................................S7.459.000.000
(30 mm) 8 mm
ø .98” (25 + 0.1 mm)
Panel Connector, Female Thread, Rear Mounting
ø 1.07” (27.2 mm)
1.24” (31.5 mm) 4 x M3
.94” (24 mm)
.96” (24.5 mm)
1.18” (30 mm) Panel hole Max 10 mm
Panel Connector with Radius Flange ø 1.10” (28 + 0.1 mm) Type Part Number
With anti-vibration O-Ring and flat body gasket
M23 x 1 ø 1.33” (34 mm) Ø 58 mm (2.28“) ..............................S7.490.000.000*)
For Counter- 1.02” (28 mm)
sunk head 1.20” (30.5 mm)
.90” (23 mm)
screw M3
51.6 ° .13” (3.5mm)
ø 2.28” (58 mm)
Panel Connector with Radius Flange Type Part Number
With anti-vibration O-Ring and flat body gasket
M23 x 1 ø 1.33” (34 mm) Ø 70 mm (2.76“) ..............................S7.491.000.000*)
1.02” (28 mm)
.13” (3.5 mm) 1.20” (30.5 mm)
For Counter- .90” (23 mm)
sunk head
screw M3
43 °
2.75” (70 mm)
*) No compatibility with TWILOCK
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
42 Dimensions & Specifications may be changed without prior notice
Panel Connector with Radius Flange M23 SIGNAL CONNECTORS M23 Signal
M23 x 1 .13” (3.5 mm) 1.15” (29.3 mm) ø 1.33” (34 mm) HOUSINGS, ACCESSORIES
.90” (23 mm) 1.02” (28 mm)
Type Part Number
With anti-vibration O-Ring and flat body gasket
Ø 90 mm (3.54“) ...................................S7.492.000.000*)
For Counter-
sunk head
screw M3
33.68°
ø 3.54” (90 mm)
Plastic protective cap for connectors Brass protective cap with chain for
with male thread............S7.000.900.101 connectors with female thread
with female thread ........S7.000.900.102 Length 70 mm.................S7.010.9S0.703*)
Length 100 mm...............S7.010.9S1.003*)
Brass protective cap for connectors with
female thread .............S7.010.900.103*) Brass protective cap with chain
for connectors with male thread
Brass protective cap for connectors with Length 70 mm...................S7.010.9S0.702
male thread....................S7.010.900.102 Length 100 mm.................S7.010.9S1.002
Tool Adapter for tightening or loosening
knurled nuts for M23 .............................. Screw Tool, adjustable 0.5 - 1.7 Nm .........
.......................................S7.010.900.192 ..........................................S7.010.900.190
Adaptor flange Crimp tool for manual crimping of
for Straight Connectors..S7.010.900.128*) machined crimp contacts for signal
connectors
Conduit adaptor .........................................S7.000.900.904
Nylon Conduit DN 12.....S7.010.900.205 Positioner for Crimp Tool
Nylon Conduit DN 14......S7.010.900.207 DMC M22520 ..................S7.000.900.DMC
Nylon Conduit DN 17......S7.010.900.209
Assembly tool ................S7.010.900.101 Locator for Crimp Tool DMC M22520 with
Bus End Connector ........S7105.000.000 positioner .......................S7.000.9DM.C03
For Sealcon Contact:
S7.010.901.001, S7.010.901.501,
S7.010.902.001, S7.010.901.031
Locator for Crimp Tool DMC M22520 with
positioner.........................S7.000.9DM.C04
For Sealcon Contact:
S7.010.901.012, S7.010.901.002,
S7.010.901.512, S7.010.901.502,
S7.010.902.002
*) No compatibility with TWILOCK
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 43
Dimensions & Specifications may be changed without prior notice
M23 Signal M23 SIGNAL CONNECTORS Type Part Number Part Number
INSERTS Pinout clockwise Pins Sockets
Inserts 6-pole Insert with solder contacts ..........S7.001.906.103..............S7.001.906.104
.18” (4.75 mm) Insert without contacts................S7.003.906.101................S7.003.906.102
.32” (8.23 mm) Insert with dip solder contacts
Length 3.5 mm.............................S7.001.906.107
Insert with dip solder contacts
Length 10 mm..............................S7.001.906.127...............S7.001.906.108
Insert Pin Mating View Insert Socket Mating View .18” (4.75 mm) Insert with dip solder contacts
Length 17 mm..............................S7.001.906.137...............S7.001.906.118
The correct dimension of a connector with dip solder contacts depends on
the particular type of housing.
Coding possibilities N, S, H, X, Y and Z
Inserts 7-pole Type Part Number Part Number
Insert Pin Mating View Insert Socket Mating View Pinout clockwise Pins Sockets
Insert with solder contacts ..........S7.001.907.103................S7.001.907.104
Insert without contacts.................S7.003.907.101................S7.003.907.102
.32” (8.23 mm) Insert with dip solder contacts
Length 3.5 mm.............................S7.001.907.107
Insert with dip solder contacts
Length 10 mm..............................S7.001.907.127................S7.001.907.108
.18” (4.75 mm) Insert with dip solder contacts
.37” (9.5 mm) Length 17 mm..............................S7.001.907.137................S7.001.907.118
The correct dimension of a connector with dip solder contacts depends on
the particular type of housing.
Coding possibilities N, S, H, X and Y
Inserts 9-pole (8 + 1) Type Part Number Part Number
Pinout clockwise Pins Sockets
Insert with solder contacts ..........S7.001.981.103...............S7.001.981.104
.34” (8.7 mm) Insert without contacts................S7.003.981.101...............S7.003.981.102
.14” (3.6 mm)
Insert with dip solder contacts
.34” (8.7 mm) Length 3.5 mm.............................S7.001.981.107
.14” (3.6 mm)
Insert with dip solder contacts
Length 10 mm..............................S7.001.981.127...............S7.001.981.108
Insert Pin Mating View Insert Socket Mating View Insert with dip solder contacts
Length 17 mm..............................S7.001.981.137...............S7.001.981.118
The correct dimension of a connector with dip solder contacts depends on
the particular type of housing.
Coding possibilities N, S, H, X and Y
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
44 Dimensions & Specifications may be changed without prior notice
M23 SIGNAL CONNECTORS M23 Signal
INSERTS
Inserts 9-pole (8 + 1) Type Part Number Part Number
Pinout clockwise Pins Sockets
.34” (8.7 mm) Insert with solder contacts ..........S7.002.981.103.................S7.002.981.104
.14” (3.6 mm)
Insert without contacts.................S7.004.981.101.................S7.004.981.102
.34” (8.7 mm) Insert with dip solder contacts
.14” (3.6 mm) Length 3.5 mm.............................S7.002.981.107
Insert Pin Mating View Insert Socket Mating View Insert with dip solder contacts
Length 10 mm..............................S7.002.981.127..................S7.002.981.108
Insert with dip solder contacts
Length 17 mm..............................S7.002.981.13....................S7.002.981.118
Coding possibilities N, S, H, X, and Y The correct dimension of a connector with dip solder contacts depends on the particular
type of housing.
Inserts 12-pole
Type Part Number Part Number
Pinout clockwise Pins Sockets
Insert with solder contacts ...........S7.001.912.103.................S7.001.912.104
Insert with solder contacts +PE (Pos.9)..S7.001.912.113........S7.001.912.114
Insert Pin Mating View Insert Socket Mating View Insert without contacts..................S7.003.912.101................S7.003.912.102
.25” (6.5 mm) Insert without contacts +PE (Pos.9)..S7.003.912.111.............S7.003.912.112
.16” (4.3 mm)
Insert with dip solder contacts
.03” (1 mm) Length 3.5 mm..............................S7.001.912.107
.43” (11.1 mm)
Insert with dip solder contacts
.38” (9.8 mm) Length 10 mm...............................S7.001.912.127.................S7.001.912.108
.14” (3.8 mm) Insert with dip solder contacts
.07” (1.9 mm) Length 17 mm .......................................S7.001.912.137..........................S7.001.912.118
.14” (3.6 mm)
.21” (5.55 mm)
Coding possibilities N, S, H, X, Y and Z .17” (4.5 mm) The correct dimension of a connector with dip solder contacts depends on the particular
*Clockwise Layout .27” (7.1 mm) type of housing.
Inserts 12-pole .38” (9.8 mm)
Type Part Number Part Number
Pinout clockwise Pins Sockets
Insert with solder contacts ...........S7.002.912.103................S7.002.912.104
Insert with solder contacts +PE (Pos.9)..S7.002.912.113.......S7.002.912.114
Insert without contacts.................S7.004.912.101.................S7.004.912.102
Insert Pin Mating View Insert Socket Mating View Insert without contacts +PE (Pos.9)..S7.004.912.111.............S7.004.912.112
.25” (6.5 mm)
Insert with dip solder contacts
.16.0” 3(4” .(31mmmm)) Length 3.5 mm..............................S7.002.912.107
.43” (11.1 mm)
.38” (9.8 mm) Insert with dip solder contacts
Length 10 mm...............................S7.002.912.127.................S7.002.912.108
.14” (3.8 mm)
.07” (1.9 mm) Insert with dip solder contacts
Length 17 mm........................................S7.002.912.137 .......................S7.002.912.118
.14” (3.6 mm)
.21” (5.55 mm) The correct dimension of a connector with dip solder contacts depends on the particular
Coding possibilities N, S, H, X, Y and Z .17” (4.5 mm) type of housing.
*Counter Clockwise Layout .27” (7.1 mm)
.38” (9.8 mm)
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 45
Dimensions & Specifications may be changed without prior notice
M23 SIGNAL CONNECTORS
INSERTS
Inserts 16-pole
M23 Signal Type Part Number Part Number
.40” (10.4 mm) Pinout clockwise Pins Sockets
.24” (6.1 mm) Insert with solder contacts ..........S7.001.916.103..............S7.001.916.104
.13” (3.4 mm)
Insert without contacts.................S7.003.916.101..............S7.003.916.102
Insert with dip solder contacts
Length 3.5 mm.............................S7.001.916.107
Insert Pin Mating View Insert Socket Mating View .11” (2.8 mm)
.22” (5.7 mm) .04” (1.1 mm) Insert with dip solder contacts
.02” (0.7 mm) Length 10 mm..............................S7.001.916.127..............S7.001.916.108
.44” (11.4 mm)
Insert with dip solder contacts
.34” (8.8 mm) Length 17 mm..............................S7.001.916.137...............S7.001.916.118
.20” (5.1 mm) The correct dimension of a connector with dip solder contacts depends on
the particular type of housing.
.07” (2 mm)
.18” (4.8 mm) .14” (3.6 mm)
.21” (5.5 mm) Coding possibilities N, S, H, X, Y and Z (see page 81)
.09” (2.5 mm)
Inserts 17-pole Type Part Number Part Number
Pinout clockwise Pins Sockets
Insert with solder contacts ..........S7.001.917.103...............S7.001.917.104
Insert without contacts.................S7.003.917.101..............S7.003.917.102
Insert Pin Mating View Insert Socket Mating View Insert with dip solder contacts
.23” (6 mm) Length 3.5 mm.............................S7.001.917.107
.03.0”4(”0.1.(8815”.2(m53mmm)mm)) Insert with dip solder contacts
.46” (11.9 mm) Length 10 mm..............................S7.001.917.127...............S7.001.917.108
.42” (10.9 mm) Insert with dip solder contacts
.25” (6.5 mm) Length 17 mm..............................S7.001.917.137...............S7.001.917.118
.17” (4.5 mm)
.13” (3.4 mm)
.21” (5.45 mm)
.35” (9.05 mm)
.07” (2 mm) The correct dimension of a connector with dip solder contacts depends on
.42” (.09 mm) the particular type of housing.
.15” (3.94 mm)
.19” (5.04 mm) .22” (5.75 mm) Coding possibilities N, S, H, X, Y and Z
Inserts 17-pole Type Part Number Part Number
Pinout clockwise Pins Sockets
Insert with solder contacts ..........S7.002.917.103...............S7.002.917.104
Insert without contacts.................S7.004.917.101...............S7.004.917.102
Insert with dip solder contacts
Length 3.5 mm.............................S7.002.917.107
Insert Pin Mating View Insert Socket Mating View Insert with dip solder contacts
.23” (6 mm) Length 10 mm..............................S7.002.917.127...............S7.002.917.108
.18” (3 mm) Insert with dip solder contacts
Length 17 mm..............................S7.002.917.137...............S7.002.917.118
.04” (1.25 mm)
.03” (0.85 mm)
.46” (11.9 mm)
.42” (10.9 mm)
.25” (6.5 mm)
.17” (4.5 mm)
.13” (3.4 mm)
.21” (5.45 mm)
.35” (9.05 mm)
.07” (2 mm) The correct dimension of a connector with dip solder contacts depends on the
.42” (.09 mm) particular type of housing.
.19” (5.04 mm) .15” (3.94 mm) Coding possibilities N, S, H, X, Y and Z
.22” (5.75 mm)
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
46 Dimensions & Specifications may be changed without prior notice
M23 SIGNAL CONNECTORS
Type Part Number INSERTS M23 Signal
Inserts 19-pole Part Number
Insert Pin Mating View Insert Socket Mating View Pinout clockwise Pins Sockets
.23” (6 mm)
.11” (3 mm) Insert with solder contacts ...........S7.001.919.103 .................S7.001.919.104
.40” (10.4 mm) Insert with solder contacts +PE (Pos.12)..S7.001.919.113 ......S7.001.919.114
.47” (12 mm)
Insert with solder contacts + PE (Pos.12) 1.5 mm elongated
Contact Arrangement .....................................................S7.001.919.123
Insert without contacts.................S7.003.919.101..................S7.003.919.102
Insert without contacts +PE (Pos.12)..S7.003.919.111............S7.003.919.112
Insert with dip solder contacts
Length 3.5 mm..............................S7.001.919.107
.47” (12 mm) Insert with dip solder contacts
.40” (10.4 mm) Length 10 mm...............................S7.001.919.127..................S7.001.919.108
.20” (5.2 mm)
Insert with dip solder contacts
.23” (6 mm) Length 17 mm...............................S7.001.919.137..................S7.001.919.118
The correct dimension of a connector with dip solder contacts depends on the particular
type of housing.
Coding possibilities N, S, H, X and Y Required Contacts
Number of Poles
6 ....................................................................................6 x 2 mm
7 ....................................................................................7 x 2 mm
9 (8 + 1) .........................................................................8 x 1 mm
........................................................................................1 x 2 mm
12 ................................................................................12 x 1 mm
16 ................................................................................16 x 1 mm
17 .................................................................................17 x 1 mm
19 ................................................................................16 x 1 mm
....................................................................................3 x 1.5 mm
10 .................Housings and contacts 10-pole, see chapter “M23
Power, M23 Hybrid“ Page 56
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 47
Dimensions & Specifications may be changed without prior notice
M23 Signal M23 SIGNAL CONNECTORS
INSERTS, CONTACTS
Coding Number of Poles Coding Possibilities
Female Inserts Male Inserts 6-pole......................................................................................N, S, H, X, Y and Z
Mating View Mating View 7-pole .........................................................................................N, S, H, X and Y
9-pole .........................................................................................N, S, H, X and Y
Contacts 12-pole....................................................................................N, S, H, X, Y and Z
16-pole....................................................................................N, S, H, X, Y and Z
17-pole....................................................................................N, S, H, X, Y and Z
19-pole .......................................................................................N, S, H, X and Y
As standard, coding groove N is opened. To use other codings, please remove the coding
barrier.
Type Crimp Range Part Number
Crimp pin 1 mm, machined........0.08 – 0.56 mm2 (AWG 28 – 20)...............S7.010.901.031
Crimp pin 1 mm, machined...........0.14 – 1 mm2 (AWG 26 – 17)....................7.010.901.001
Crimp pin 1 mm, machined..........0.75 – 1.5 mm2 (AWG 17 – 16)................S7.010.901.021
Crimp socket 1 mm, machined....0.08 – 0.56 mm2 (AWG 28 – 20)..............S7.010.901.012
Crimp socket 1 mm, machined.......0.34 – 1 mm2 (AWG 22 – 17) ...............S7.010.901.002
Crimp socket 1 mm, machined......0.75 – 1.5 mm2 (AWG 17 – 16)..............S7.010.901.022
Crimp pin 1 mm, stamped............0.14 – 0.56 mm2 (AWG 26 – 20)..................upon request
Crimp socket 1 mm, stamped.......0.14 – 0.56 mm2 (AWG 26 – 20).................upon request
Crimp pin 1.5 mm, machined..........0.14 – 1 mm2 (AWG 26 – 17)...............S7.010.901.501
Crimp socket 1.5 mm, machined ..0.14 – 0.56 mm2 (AWG 26 – 20)............S7.010.901.512
Crimp socket 1.5 mm, machined.....0.56 – 1 mm2 (AWG 20 – 17)...............S7.010.901.502
Crimp pin 2 mm, machined.............0.75 – 2.5 mm2 (AWG 18 – 14)............S7.010.902.001
Crimp socket 2 mm, machined........0.75 – 2.5 mm2 (AWG 18 – 14)............S7.010.902.002
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
48 Dimensions & Specifications may be changed without prior notice
M23 POWER, M23 HYBRID CONNECTORS
HIGH POWER AND MANY OPTIONS
The M23 Power connector is diverse with Mechanical Data Materials and Technical Data
many pin-out configurations and housing
styles. Connection styles include screw lock, Housing Copper-Zinc alloy, Die Cast
Twilock 1/4 turn system, and Twilock-S which Housing surface Nickel plated
mates to Speedtec® by Intercontec / Tyco. Other surface upon request
Available in 6, 8, 9, 10 or 12 pole inserts with Inserts Thermoplastic Polyamid PA 6 (Nylon
power transmission up to 28 Amps. 6/6), PBT
Contacts Fire protection class V-0
M23 Power Contact surface at point of contact Brass Alloy
Minimum mating cycles Nickel and gold plated (0.25 μm)
Seals / O-Rings > 1000*)
Temperature range Buna-N standard, optional FKM
Type of contacts -40°F – 257°F (-40°C – 125°C)
Protection Crimp
IP 67 / IP 69K per EN 60 529
Cable diameter range (connected), NEMA 4x
.28 – .67“ (7 - 17 mm)
*Hybrid Insert available on page 56. Insert fits standard M23 Power shell *) Sealcon to Sealcon connector
Electrical Data 5 + PE 4 + 3 + PE 5 + 3 + PE 10
Number of positions 6 4 4 5 4 10
2 1 2 1 2 1
Number of contacts 28 8 28 10 28 10
Contact-Ø [mm] 600 300 600 250 600 160
Nominal current [A] 4000 2500 4000 2500 4000 2500
Nominal voltage [V~] degree of protection > 1013 > 1013
Test voltage (Breakdown voltage) [V~] > 1013 3 > 1013 3
Insulation resistance [MΩ] 3 3 3
Max. contact resistance [mΩ]
M23 Hybrid Electrical Data POWER 4 + 4 + 3 + PE ETHERNET
4 4
Number of positions 2 SIGNAL 0.6
4
Number of contacts (18 - 12) 0.75 – 4 1 (28 - 22) 0.08 – 0.34
Contact-Ø [mm] 28 (26 - 17) 0.14 – 1 2
AWG [mm2] 600 60
Nominal current [A] 4000 8 500
Nominal voltage [V~] degree of protection > 1013 300 > 106
Test voltage (Breakdown voltage) [V~] 2500
Insulation resistance [MΩ] <3 > 1010 <3
Max. contact resistance [mΩ] <3 5e
Hybrid Connector Ethernet Capabilities
Components Needed For A Complete M23 Power Connector: Connection System Types
- HOUSING (pg 51 - 54) THREADED TWILOCK 1/4 Turn TWILOCK-S*
- INSERT (pg 56)
- CONTACTS (pg 56)
*Intermateable
with Speedtec
See Technical Information page 78
*Assembly Instructions can be found at www.SealconUSA.com or by calling us at 1-800-456-9012
www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
50 Dimensions & Specifications may be changed without prior notice