Circular connector catalog

M23 POWER, M23 HYBRID CONNECTORS

HOUSINGS

Straight Connector, Female Thread Cable-Ø Part Number

3.05” (77.5 mm) 7 – 12 mm (.27 – .47“) ........................S7.550.500.000
11 – 17 mm (.43 – .67“) ......................S7.550.600.000

1.07” (27.2 mm)

.94” (24 mm) .94” (24 mm)

Straight Connector, Female Thread TWILOCK / TWILOCK-S * - Quick Connect Cable-Ø Part Number M23 Power

3.00” (76.4 mm) 7 – 12 mm (.24 – .47“).........................S7.556.500.000
11 – 17 mm (.43 – .67“) ......................S7.556.600.000

ø 1.10” (28 mm) *Intermateable with Speedtec (Twilock-S)
7 – 12 mm (.24 – .47“).........................S7.556.500.00S
11 – 17 mm (.43 – .67“).......................S7.556.600.00S

.94” (24 mm) .94” (24 mm)

Straight Connector, Male Thread TWILOCK / TWILOCK-S * - Quick Connect Cable-Ø Part Number

2.82” (71.8 mm) 7 – 12 mm (.27 – .47“).........................S7.560.500.000
11 – 17 mm (.43 – .67“).......................S7.560.600.000

M23 x 1 *Intermateable with Speedtec (Twilock-S)
7 – 12 mm (.24 – .47“).........................S7.566.500.00S
11 – 17 mm (.43 – .67“).......................S7.566.600.00S

.94” (24 mm) .94” (24 mm)

*ALSO MATES WITH
TWILOCK SYSTEM*

Panel Connector, Male Thread, with Strain Relief Cable-Ø Part Number

M23 x 1 4 holes Ø 3.2 mm (.13“), front or rear mounting
ø 1.02” (26 mm) 7 – 12 mm (.27 – .47“).........................S7.683.500.000
3.2 mm 11 – 17 mm (.43 – .67“).......................S7.683.600.000

.94” (24 mm) 1.72” .96” 1.11” (28.4 mm)
(43.8 mm) (24.6 mm) 1.37”(35 mm)
2.82” (71.8 mm) Panel hole

1.04” (26.5 + 0.2 mm)

Panel Connector, Female Thread, with Strain Relief Cable-Ø Part Number

3.07” (78 mm) 1.37” (35 mm) 4 holes Ø 3.2 mm (.13“), front or rear mounting
7 – 12 mm (.27 – .47“).........................S7.681.500.000
1.83”(46.5 mm) 1.10”(28 mm) 1.11” (28.4 mm) 11 – 17 mm (.43 – .67“).......................S7.681.600.000

1.07” (27.2
mm)
.94” (24 mm)
ø 3.2 mm
Panel hole
1.07” (27.2 + 0.2 mm)

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 51
Dimensions & Specifications may be changed without prior notice

M23 POWER, M23 HYBRID CONNECTORS

HOUSINGS

Panel Connector, Male Thread, with Strain Relief, TWILOCK / TWILOCK-S Cable-Ø Part Number

2.81” (71.5 mm) Single hole mounted, rear mounting, thread M25 x 1.5
1.33” (33.8 mm) 7 – 12 mm (.27 – .47“)........................S7.653.500.000
M23 x 1 11 – 17 mm (.43 – .67“)......................S7.653.600.000
M25 x 1.5
*Intermateable with Speedtec (Twilock-S)
.94” (24.1 + 7 – 12 mm (.24 – .47“).........................S7.653.500.00S
0.1 mm) 11 – 17 mm (.43 – .67“).......................S7.653.600.00S
.98” (25 + 0.1 mm)

.94” 1.18” 1.14” Panel hole max. Including jam nut M25 x 1.5
(24 mm) (30 mm) (29 mm) 14 mm
ø .98” (25 + 0.1 mm)

M23 Power Right Angle Connector, Female Thread, rotatable Cable-Ø Part Number

3.07” (78 mm) 7 – 12 mm (.27 – .47“)........................S7.576.500.000
.98” (25 mm) 11 – 17 mm (.43 – .67“) .....................S7.576.600.000

1.06” 2.85” (72.5 mm)
.94” (27 mm)
(24 mm)

Right Angle Connector, Male Thread, rotatable ø 1.07 (27.2 mm) Cable-Ø Part Number

2.67” (68 mm) 7 – 12 mm (.27 – .47“)........................S7.580.500.000
.86” (22 mm) 10 – 14 mm (.39 – .55“)......................S7.580.600.000

.94” 2.85” (72.5 mm) *No Compatibility with Twilock
(24 mm)
.94”
(24 mm)

M23 x 1 Cable-Ø Part Number

Panel Connectors, Male Thread, Front Mounting TWILOCK / TWILOCK-S * - 4 holes Ø 3.2 mm (.13“).......................S7.601.000.000
Quick Connect 4 holes Ø 2.7 mm (.11”).......................S7.605.000.000

1.22” (31 mm)M23 x 1 ø 2.7 /ø 3.2 mm *Intermateable with Speedtec (Twilock-S)
1.02” (26 mm) 4 x holes 3.2 mm, Flange 25 x 25........S7.601.000.00S
4 x holes 3.2 mm, Flange 28 x 28........S7.601.100.00S
.77” (19.8 mm)
Panel hole
Panel Connector with knurled Nut, Front Mounting ø .78” (20+ 0.1 mm) Cable-Ø Part Number

ø 1.07”(27.2 mm) ø 2.7 /ø 3.2 mm 4 holes Ø 3.2 mm (.13“).......................S7.641.000.000
1.55 (39.5 mm) Optional: Flat gasket....STAD2-7P2510
.98” (25 mm) 4 holes Ø 2.7 mm (.11“).......................S7.645.000.000
.77” (19.8 mm) Optional: Flat gasket....STAD1-7P2510

Panel hole
ø .78” (20+ 0.1 mm)

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
52 Dimensions & Specifications may be changed without prior notice

M23 POWER, M23 HYBRID CONNECTORS

HOUSINGS

Panel Connector, Male Thread, Rear Mounting Cable-Ø Part Number

1.35” (34.5 mm)M23 x 1 ø 3.2 mm With anti-vibration O-Ring
1.27” (32.5 mm) 4 holes Ø 3.2 mm (.13“)......................S7.661.000.000*)
.98” (25 mm)
.80” (20.5 mm) *ALSO MATES WITH
TWILOCK SYSTEM*

Panel hole max.

ø .90” (23.1+ 0.1 m1m2)mm

Panel Connector, Male Thread, Single Hole Mounted M20 Cable-Ø Part Number M23 Power

M23 x 1 .75” (19.1 + 0.1 mm) Front mounting
1.61” (41 mm) Thread M20 x 1.5................................S7.621.000.000*)

Options: Flat gasket, jam nut M20 x 1.5

.23” (6 mm) .94” .79” (20.2 + 0.1 mm)
(26 mm) Panel hole

M20 x 1.5 ø .79” (20.2 + 0.1 mm) *) No compatibility with TWILOCK

Panel Connector, Male Thread, Single Hole Mounted PG 13 Cable-Ø Part Number

M23 x 1 .75” (19.3 + 0.1 mm) Front mounting
Thread PG 13.5 ..................................S7.623.000.000*)

Options: Flat gasket, jam nut PG 13.5

1.61” (41 mm) 1.02” .81” (20.6 + 0.1 mm)
(26 mm) Panel hole
(6.2m3m” ) PG 13.5
ø .81” (20.6 + 0.1 mm)

Panel Connector, Male Thread, Single Hole Mounted M25 Cable-Ø Part Number

M23 x 1 .94” (24.1 + 0.1 mm) Front mounting
Thread M25x1.5....................................S7.626.000.000

1.27” (32.5 mm) Options: Flat gasket, jam nut M 25 x 1.5

1.10” .99” (25.2 + 0.1 mm) *ALSO MATES WITH
(7.2m7m” ) M25 x 1.5 (28 mm) Panel hole TWILOCK SYSTEM*

ø .99” (25.2 + 0.1 mm)

Panel Connector, Male Thread, Single Hole Mounted Cable-Ø Part Number

M25 x 1.5 .94” (24.1 + 0.1 mm) Rear mounting
M23 x 1 Thread M25 x 1.5...................................S7.651.000.000

1.46 “(37.3 mm) Including jam nut M25 x 1.5
1.33 (33.8 mm)
1.14” .98” (25 + 0.1 mm) *ALSO MATES WITH
(29 mm) Panel hole TWILOCK SYSTEM*
max.
8 mm

1.18” ø .98” (25 + 0.1 mm)
(30 mm)

*) No compatibility with TWILOCK

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 53
Dimensions & Specifications may be changed without prior notice

M23 POWER, M23 HYBRID CONNECTORS

HOUSINGS

Right Angle Panel Connector, Male Thread, flange Cable-Ø Part Number

2.15” (54.7 mm) 4 holes Ø 2.7 mm (.11“)........................S7.635.000.000
Optional: Flat gasket....STAD1-7P2510
(5.1m9m” )
1.35” (34.5 mm) ø 2.7 mm Easy fastening with M2.5 x 10 mm
.98” (25 mm) or 4 x .39“ long screws
.77” (19.8 mm)
*No Compatibility with Twilock

M23 Power Panel hole
ø .79” (20.1 + 0.1 mm)

Right Angle Panel Connector, Male Thread, rotatable Cable-Ø Part Number

2.15” (54.7 mm) 335° rotatable, single hole mounted
Thread M20 x 1.5..................................S7.636.000.000

1.85” (47.1 mm) *ALSO MATES WITH
M23 x 1 TWILOCK SYSTEM*

.29” Panel hole
(7.6 mm) M20 x 1.5 ø .79” (20.2 + 0.1 mm)

Right Angle Panel Connector, Male Thread, rotatable, flange, Cable-Ø Part Number
TWILOCK, TWILOCK-S
330° rotatable, 1.5 mm locking screw at flange
2.25” (57.3 mm) 4 x holes Ø 3.2 mm,
1.64” (41.8 mm) 1.00” (25.6 mm) Flange 25 x 25 mm...............................S7.639.000.000
.17” (4.5 mm) .77” (19.8 mmø) 2.7 Optional: Flat gasket....STAD1-7P2510
mm
M23 x 1 4 x holes Ø 3.2 mm,
ø .79” (20.1 + 0.1 mm) Flange 28 x 28 mm...............................S7.639.100.000
* Compatible with Speedtec (Twilock-S)
4 x holes Ø 3.2 mm,
Flange 25 x 25 mm...............................S7.639.000.00S
Optional: Flat gasket....STAD1-7P2510

4 x holes Ø 3.2 mm,
Flange 28 x 28 mm...............................S7.639.100.00S

Right Angle Panel Connector, Male Thread, rotatable, flange Cable-Ø Part Number

2.15” (54.7 mm) .98” (25 mm) 1.10” (28 mm) 300° rotatable, locking screw at flange
.77” (19.8 mm) .88” (22.6 mm) 4 x holes Ø 2.7 mm (.11“).....................S7.638.000.000
øm2m.7 ø 3.2 Flange 25 x 25 mm
1.62” (41.2 mm) mm Optional: Flat gasket....STAD1-7P2510

(2..509m”m) Panel hole 4 x holes Ø 3.2 mm (.13“).....................S7.638.100.000
ø .79” (20.1 + 0.1 mm) Flange 28 x 28 mm

*ALSO MATES WITH
TWILOCK SYSTEM*

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
54 Dimensions & Specifications may be changed without prior notice

M23 POWER, M23 HYBRID CONNECTORS

ACCESSORIES

Plastic protective cap for connectors Brass protective cap with chain for M23 Power
with male thread.............S7.000.900.101 connectors with female thread
with female thread .........S7.000.900.102 Length 70 mm..................S7.010.9S0.783*)
Length 100 mm................S7.010.9S1.083*)
Brass protective cap for connectors with Brass protective cap with chain
female thread ..............S7.010.900.183*) for connectors with male thread
Length 70 mm....................S7.010.9S0.702
Brass protective cap for connectors with Length 100 mm..................S7.010.9S1.002
male thread.....................S7.010.900.102 Crimp tool for manual crimping of machined
crimp contacts
Adaptor flange Works with contacts for power or signal
for Straight Connectors..S7.010.900.128*) ..........................................S7.000.900.901
Positioner for Crimp Tool
Conduit adaptor DMC M22520 ..................S7.000.900.DMC
Nylon Conduit DN 12......S7.010.900.205
Nylon Conduit DN 14.......S7.010.900.207 Screw Tool, adjustable 0.5 - 1.7 Nm .........
Nylon Conduit DN 17.......S7.010.900.209 ..........................................S7.010.900.190

Tool Adapter for tightening or loosening Locator for Crimp Tool DMC M22520 with
knurled nuts for M23 .............................. positioner .......................S7.000.9DM.C06
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S 7. 010 . 9 0 0 .1 9 2 For Sealcon Contact:
S7.010.941.001, S7.010.942.001,
Disassembly Tool S7.010.942.011,
for crimp contacts...........S7.010.900.531 Locator for Crimp Tool DMC M22520 with
positioner.........................S7.000.9DM.C07
For Sealcon Contact:
S7.010.941.002, S7.010.942.002,
S7.010.942.012,

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 *) No compatibility with TWILOCK
Dimensions & Specifications may be changed without prior notice
55

M23 POWER, M23 HYBRID CONNECTORS

INSERTS, CONTACTS

Contact Arrangement, Mating View Number of Poles Required Contacts

24 6 - pole 42 SNAP-IN SOLUTION
15 51 6 x crimp pins 2 mm...............................................................S7.084.951.121
6 x crimp sockets 2 mm.........................................................S7.084.951.122
EUROCLIP
6 x crimp pins 2 mm................................................................S7.084.951.101
6 x crimp sockets 2 mm..........................................................S7.084.951.102

31 8 - pole 13 SNAP-IN SOLUTION
4 x crimp pins 1 mm, 4 x crimp pins 2 mm..............................S7.084.943.121
M23 Power D 4A AD 4 x crimp sockets 1 mm, 4 x crimp sockets 2 mm...................S7.084.943.122
CB 4 EUROCLIP
4 x crimp pins 1 mm, 4 x crimp pins 2 mm..............................S7.084.943.101
BC 4 x crimp sockets 1 mm, 4 x crimp sockets 2 mm...................S7.084.943.102

9 - pole 5 x crimp pins 1 mm, 4 x crimp pins 2 mm..............................S7.084.953.101
5 x crimp sockets 1 mm, 4 x crimp sockets 2 mm..................S.7.084.953.102

9 - pole 5 x crimp pins 1 mm, 4 x crimp pins 2 mm..............................S7.084.909.101
5 x crimp sockets 1 mm, 4 x crimp sockets 2 mm...................S7.084.909.102

10 - pole 10 x crimp pins 1 mm..............................................................S7.084.910.101
10 x crimp sockets 1 mm........................................................S7.084.910.102

W U HYBRID INSERT - Power, Signal, and Ethernet
U W
4 each crimp pins 1 mm, 2 mm, 0.6 mm.................................S7.084.944.101
DV A 12 - pole A VD 4 each crimp sockets 1 mm, 2 mm, 0.6 mm...........................S7.084.944.102
B
4 1 1 4 *Fits Any M23 Connector Shell
2
C3 B 3C Crimp Range
2

Contacts Type Part Number

Crimp pin 0.6 mm, machined.......0.08 – 0.34 mm² (AWG28 – AWG 22) ........S7.010.980.641

Crimp socket 0.6 mm, machined..0.08 – 0.34 mm² (AWG28 – AWG 22) ........S7.010.980.602

Crimp pin 1 mm, machined...............0.14 – 1 mm2 (AWG 26 – 17) .................S7.010.941.001
Crimp pin 1 mm, machined..............0.75 – 1.5 mm2 (AWG 18 – 16)...............S7.010.941.021
Crimp socket 1 mm, machined..........0.14 – 1 mm2 (AWG 26 – 17) ................S7.010.941.002
Crimp socket 1 mm, machined........0.75 – 1.5 mm2 (AWG 18 – 16)................S7.010.941.022
Crimp pin 2 mm, machined.............0.75 – 2.5 mm2 (AWG 18 – 14)................S7.010.942.001
Crimp pin 2 mm, machined................2.5 – 4 mm2 (AWG 14 – 12) .................S7.010.942.011
Crimp socket 2 mm, machined........0.75 – 2.5 mm2 (AWG 18 – 14)...............S7.010.942.002
Crimp socket 2 mm, machined...........2.5 – 4 mm2 (AWG 14 – 12) .................S7.010.942.012

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
56 Dimensions & Specifications may be changed without prior notice



M27 SIGNAL CONNECTORS

RELIABLE DATA TRANSMISSION

The M27 Signal connector is available in 26 and 28 Mechanical Data Materials and Technical Data
pole versions. The design of this connector allows it
to be IP67 / IP 69K with an operating temperature Housing Copper-Zinc alloy
of up to 257°F. Available in male and female thread Die Cast
connectors as well as panel connectors.
Housing surface Nickel plated
Other surface upon request

Inserts Thermoplastic Polyamide PA 6 (Nylon 6/6), PBT
Fire protection class V-0

Contacts Brass Alloy

Contact surface at point of contact Nickel and gold plated (0.25 μm)

Minimum mating cycles 50

Seals / O-Rings Buna-N standard, optional FKM
Temperature range -40°F – 257°F (-40°C – 125°C)
Type of contacts Crimp, solder, dip-solder (PCB)
Protection IP 67 / IP 69K per EN 60529 (connected),
NEMA 4x
Cable diameter range .28 – .67“ (7 - 17 mm)

M27 Signal Electrical Data 26 28

Number of positions 26 28
Number of contacts 1 1
Contact-Ø [mm] 8 8
Nominal current [A] 150 150
Nominal voltage [V~] 1500 1500
Test voltage (Breakdown voltage) [V~] > 1012 > 1012
Insulation resistance [MΩ] 3 3
Max. contact resistance [mΩ]
Degree of Protection 3 3

Components Needed For A Complete M27 Signal Connector:

- HOUSING (pg 59)
- INSERT (pg 60)
- CONTACTS (if crimp contact insert is selected) (pg 60)

See Technical Information page 78
*Assembly Instructions can be found at www.SealconUSA.com or by calling us at 1-800-456-9012

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
58 Dimensions & Specifications may be changed without prior notice

M27 SIGNAL CONNECTORS

HOUSINGS, ACCESSORIES

Straight Connector, Female Thread Cable-Ø Part Number

2.91” (74 mm) 7 – 12 mm (.28 – .47”) ....................................S7.110.500.000
11 – 17 mm (.43 – .67”) ..................................S7.110.600.000

ø 1.18” (30 mm)

1.06” 0.98”
(27 mm) (25 mm)

Straight Connector, Male Thread Cable-Ø Part Number

3.07” (78 mm) 7 – 12 mm (.28 – .47”) ....................................S7.210.500.000
11 – 17 mm (.43 – .67”) ..................................S7.210.600.000

M27 x 1

1.06” 0.98” 1.06” (27 mm) M27 Signal
(27 mm) (25 mm)

Panel Connector, Male Thread, front mounting Type Part Number
4 x holes 3.2 mm...............................................S7.410.700.000
M27 x 1 ø 3.2 mm
1.02” (26 mm)
.98” (25 mm)
1.18” (30 mm)
.90” (23 mm)

ø .89” (22.8 mm) Brass protective cap with chain for
Panel hole connectors with female thread
Length 70 mm.............................S7.010.9S0.707
ø .90” (23 + 0.1 mm) Brass protective cap with chain
Plastic protective cap for connectors for connectors with male thread
with male thread....................S7.000.980.167 Length 70 mm.............................S7.010.9S0.708
with female thread.................S7.000.980.168 Crimp tool for manual crimping of machined
Brass protective cap for connectors with crimp contacts
female thread..........................S7.010.900.169 Works with contacts for power or signal
Brass protective cap for connectors with ..........................................S7.000.900.901 / 904
male thread.............................S7.010.900.170

Assembly Tool.........................S7.010.900.110

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 59
Dimensions & Specifications may be changed without prior notice

M27 SIGNAL CONNECTORS Type Part Number Part Number

INSERTS, PINS

Inserts 26-pole

Pinout clockwise Pins Sockets

Insert with solder contacts...........S7.001.926.103..................S7.001.926.104

15 1 15 Insert without contacts.................S7.003.926.101..................S7.003.926.102
16 16
13 14 12 3 3 2 14 13
24 17 17 24
12 23 25 18 4 4 18 25 2312 Insert with dip solder contacts
PO 19 SO 22 Length 10 mm...............................S7.001.926.127
11102221 26 20 5 5 19 26 21 11
6 20 10
6
987 789

Insert Pin Mating View Insert Socket Mating View The correct dimension of a connector with dip solder contacts depends on the
particular type of housing.

Inserts 28-pole Type Part Number Part Number

Pinout clockwise Pins Sockets

Insert with solder contacts...........S7.001.928.103 .................S7.001.928.104

13 14 15 12 3 3 2 1 15 14 13
24 16 17 17 16 24

11121203222218P22O65 227019186 4 4 618192207S22O65 22812221301112
5 5

987 789

M27 Signal Insert Pin Mating View Insert Socket Mating View

Contact Arrangement Number of Poles Required Contacts

13 14 15 12 3 26..........................................................................26 x 1 mm
24 16 17

12 23 25 18 4
PO 19
11102221 26 20 5
987 6

13 14 15 12 3
24 16 17

11121203222218P22O65 227019186 4 28..........................................................................28 x 1 mm
5

987

Contacts Type Crimp Range Part Number

Crimp pin 1 mm, machined ...........0.14 – 0.56 mm² (AWG26 – AWG 17) .........S7.010.971.001

Crimp socket 1 mm, machined ......0.14 – 0.56 mm² (AWG26 – AWG 17) .........S7.010.971.002

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
60 Dimensions & Specifications may be changed without prior notice



M40 POWER CONNECTORS

HIGH POWER AND CURRENT

The M40 Power connector is built for high power Mechanical Data Materials and Technical Data
transmission with capabilities up to 55 Amps. By having Housing Copper-Zinc alloy
a specially designed housing, safe electromagnetic Die Cast
compatibility protection is achieved. The durable nickel Housing surface Nickel plated
plated brass housing is perfect for rough industrial Other Surface upon request
environments and for uses such as heavy drive Inserts (for contacts) Thermoplastic Polyamide PA 6 (Nylon
applications. 6/6), PBT
Contacts Fire protection class V-0
Contact surface at point of contact Brass alloy
Minimum mating cycles Nickel and gold plated (0.25 μm)
Seals / O-Rings > 500
Temperature range Buena-N Standard, Optional FKM
Type of contacts -40°F – 257°F (-40°C – 125°C)
Protection Crimp
IP 67 / IP 69K per EN 60 529
Cable diameter range (connected), NEMA 4x
.51 -1.10“ (13 - 28 mm)

Electrical Data 2 + 3 + PE 4 + 3 + PE
Number of positions
2 4 4 4
Number of contacts 2 3.6 2 3.6
Contact-Ø [mm] 28 55 28 55
Nominal current [A] 300 600 300 600
Nominal voltage [V~] degree of protection 3 2500 4000 2500 4000
Test voltage (Breakdown voltage) [V~]
Insulation resistance [MΩ] > 1013 > 1013

M40 Power Max. contact resistance [mΩ] 31 31

Components Needed For A Complete M40 Power Connector:

- HOUSING (pg 63 - 66)
- INSERT Included
- CONTACTS (pg 67)

! Standard delivery of M40 (size 1.5) Power Connector include Contact Insert.

See Technical Information page 78
*Assembly Instructions can be found at www.SealconUSA.com

or by calling us at 1-800-456-9012

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
62 Dimensions & Specifications may be changed without prior notice

M40 POWER CONNECTORS

HOUSINGS

Straight 6 Position Connector, Female Thread Cable-Ø Part Number

4.37” (111.2 mm) 2 + 3 + PE, insert for sockets
13 – 18 mm (.51 – .71“).......................S7.710.623.000
ø 1.81” (46 mm) 17 – 24 mm (.67 – .97“).......................S7.710.723.000
21 – 28 mm (.83 – 1.10“).....................S7.710.823.000

(410.5m7m” ) (318.4m9m” ) *INSERT INCLUDED
CONTACTS ORDERED

SEPARATELY*

Straight 8 Position Connector, Female Thread Cable-Ø Part Number

4.37” (111.2 mm) 4 + 3 + PE, insert for sockets
13 – 18 mm (.51 – .71“).......................S7.710.643.000
17 – 24 mm (.67 – .97“)........................S7.710.743.000
21 – 28 mm (.83 – 1.10“).....................S7.710.843.000

ø 1.81” (46 mm) *INSERT INCLUDED
CONTACTS ORDERED
(410.5m7m” ) (318.4m9m” )
SEPARATELY*

Straight 6 Position Connector, Female Thread TWILOCK-S Cable-Ø Part Number

4.52” (115 mm) 2 + 3 + PE, insert for sockets
*Intermateable with Speedtec (Twilock-S)
ø 1.81” (46 mm) 13 – 18 mm (.51 – .71“).....................S7.716.623.00S*) M40 Power
17 – 24 mm (.67 – .97“).....................S7.716.723.00S*)
21 – 28 mm (.83 – 1.10“)...................S7.716.823.00S*)

(410.5m7m” ) (318.4m9m” ) *INSERT INCLUDED
CONTACTS ORDERED

SEPARATELY*

Straight 8 Position Connector, Female Thread TWILOCK-S Cable-Ø Part Number

4.52” (115 mm) 4 + 3 + PE, insert for sockets
*Intermateable with Speedtec (Twilock-S)
ø 1.81” (46 mm) 13 – 18 mm (.51 – .71“).....................S7.716.643.00S*)
17 – 24 mm (.67 – .97“).....................S7.716.743.00S*)
21 – 28 mm (.83 – 1.10“)...................S7.716.843.00S*)

*INSERT INCLUDED
CONTACTS ORDERED

SEPARATELY*

(410.5m7m” ) (318.4m9m” )

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 *) Under Development
Dimensions & Specifications may be changed without prior notice
63

M40 POWER CONNECTORS Cable-Ø Part Number

HOUSINGS 2 + 3 + PE, insert for pins
13 – 18 mm (.51 – .71“).......................S7.720.623.000
Straight 6 position Connector, Male Thread, Threaded and TWILOCK-S 17 – 24 mm (.67 – .97“).......................S7.720.723.000
21 – 28 mm (.83 – 1.10“).....................S7.720.823.000
4.64” (118 mm)

M40 x 1.5 *Intermateable with Speedtec (Twilock-S)
13 – 18 mm (.51 – .71“).....................S7.720.623.00S*)
17 – 24 mm (.67 – .97“).....................S7.720.723.00S*)
21 – 28 mm (.83 – 1.10“)..................S7.720.823.00S*)

(410.5m7m” ) (318.4m9m” )

*INSERT INCLUDED
CONTACTS ORDERED

SEPARATELY*

Straight 8 Position Connector, Male Thread, Threaded and TWILOCK-S Cable-Ø Part Number

4 + 3 + PE, insert for pins
13 – 18 mm (.51 – .71“).......................S7.720.643.000
17 – 24 mm (.67 – .97“).......................S7.720.743.000
21 – 28 mm (.83 – 1.10“).....................S7.720.843.000

4.64” (118 mm) *Intermateable with Speedtec (Twilock-S)
13 – 18 mm (.51 – .71“).....................S7.720.643.00S*)
M40 x 1.5 17 – 24 mm (.67 – .97“).....................S7.720.743.00S*)
21 – 28 mm (.83 – 1.10“)..................S7.720.843.00S*)

1.57” 1.49”
(40 mm) (38 mm)

Panel 6 Position Connector, Male Thread, Front Mounting, *INSERT INCLUDED
Threaded and TWILOCK-S CONTACTS ORDERED

M40 Power M40 x 1.5 1.18” ø(340.5mmmm) SEPARATELY*

2.01” (51 mm) Type Part Number
2 + 3 + PE, insert for pins
4 holes Ø 4.5 mm (.18“)........................S7.740.023.000
*Intermateable with Speedtec (Twilock-S)
4 holes Ø 4.5 mm (.18“).....................S7.740.023.00S*)

Panel hole *INSERT INCLUDED
1.57” (40 mm) ø 1.25” (32 + 0.1 mm) CONTACTS ORDERED

SEPARATELY*

Panel 8 Position Connector, Male Thread, Front Mounting, Type Part Number
Threaded and TWILOCK-S 4 + 3 + PE, insert for pins
4 holes Ø 4.5 mm (.18“)........................S7.740.043.000
M40 x 1.5 1.18” (30 mm) *Intermateable with Speedtec (Twilock-S)
ø 4.5 mm 4 holes Ø 4.5 mm (.18“).....................S7.740.043.00S*)
2.01” (51 mm)
Panel hole * INSERT INCLUDED
1.57” (40 mm) 1.25” (32 + 0.1 mm) CONTACTS ORDERED

SEPARATELY*

*) Under Development

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
64 Dimensions & Specifications may be changed without prior notice

M40 POWER CONNECTORS

HOUSINGS

Panel 6 Position Connector with knurled nut, Front Mounting Type Part Number
2 + 3 + PE, insert for sockets
ø 1.79” (45.6 mm) 1.18” (30 mm) 4 holes Ø 4.5 mm (.18“)........................S7.744.023.000

1.74” (44.2 mm) (410.5m7m” ) øm4m.5 *INSERT INCLUDED
CONTACTS ORDERED
1.57” (40 mm)
Panel hole SEPARATELY*

ø 1.25” (32 + 0.1 mm)

Panel 8 Position Connector with knurled nut, Front Mounting Type Part Number
4 + 3 + PE, insert for sockets
ø 1.79” (45.6 mm) 1.18” (30 mm) 4 holes Ø 4.5 mm (.18“).......................S7.744.043.000

1.74” (44.2 mm) 1.57” ø 4.5 mm *INSERT INCLUDED
(40 mm) CONTACTS ORDERED

1.57” (40 mm) SEPARATELY*

Panel hole

ø 1.25” (32 + 0.1 mm)

Right Angle Panel 6 Position Connector, Male Thread, rotatable TWILOCK-S Type Part Number
2 + 3 + PE, insert for pins
4.05” (103 mm) 1.18” (30 mm) *Intermateable with Speedtec M40 Power
4 holes Ø 4.5 mm (.18“)......................S7.749.023.00S*)

2.59” (66 mm) ø 4.5 mm *INSERT INCLUDED
CONTACTS ORDERED
1.57” (40 mm)
Panel hole SEPARATELY*

ø 1.00” (25.5 mm) ø 1.25” (32 + 0.1 mm)

V

Right Angle Panel 8 Panel Connector, Male Thread, rotatable TWILOCK-S Type- + Part Number
2+3+PE 4 + W3 + PE, inUser t for pins
*Intermateable with Speedtec
4 holes Ø 4.5 mm (.18“).......................S7.749.043.00S*)
4.05” (103 mm) 1.18” (30 mm)

2.59” (66 mm) ø 4.5 mm V + *INSERT INCLUDED
- CONTACTS ORDERED
4+3+PE U
W 1 SEPARATELY*
1.57” (40 mm) 2 *) Under Development
Panel hole
ø 1.00” (25.5 mm)
ø 1.25” (32 + 0.1 mm)

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 65
Dimensions & Specifications may be changed without prior notice

M40 POWER CONNECTORS

HOUSINGS, ACCESSORIES

Right Angle Panel 6 Position Connector, Male Thread, rotatable Type Part Number
2 + 3 + PE, insert for pins
3.77” (96 mm) 1.18” (30 mm) 4 holes Ø 4.5 mm (.18“)........................S7.743.023.000

2.71” (69 mm) ø 4.5 mm *INSERT INCLUDED
M40 x 1.5 1.57” (40 mm) CONTACTS ORDERED

SEPARATELY*

Panel hole

0.90” (23 mm) ø 1.25” (32+ 0.1 mm) V
-+

Right Angle Panel 8 Panel Connector, Male Thread, rotatable 2+3+PE TypeW U Part Number

3.77” (96 mm) 1.18” (30 mm) 4 + 3 + PE, insert for pins
4 holes Ø 4.5 mm (.18“).........................S7.743.043.000

2.71” (69 mm) ø 4.5 mm V *INSERT INCLUDED
M40 x 1.5 - CONTACTS ORDERED
1.57” (40 mm) 4+3+PE +
W SEPARATELY*
2 U
1

Panel hole

0.90” (23 mm) ø 1.25” (32 + 0.1 mm)

Straight 6 Position Front Mount Connector, Female Thread Type Part Number
Front mounting, 2 + 3 + PE, insert for pins
M40 x 1.5 Thread M40 x 1.5..................................S7.742.023.000

2.46” (62.5 mm) (218.1m0”m) Panel hole *INSERT INCLUDED
1.98” (50.5 mm) CONTACTS ORDERED

(102.4m7m” ) M40 x 1.5 ø 1.58” (40.2 + 0.1 mm) SEPARATELY*

Straight 8 Position Front Mount Connector, Female Thread Type Part Number
Front mounting, 4 + 3 + PE, insert for pins
2.46” (62.5 mm) M40 x 1.5 Thread M40 x 1.5..................................S7.742.043.000
1.98” (50.5 mm)
M40 Power (218.1m0”m) Panel hole V + *INSERT INCLUDED
- CONTACTS ORDERED
U
W 1 SEPARATELY*
2

(102.4m7m” ) M40 x 1.5 ø 1.58” (40.2 + 0.1 mm)

Plastic protective cap for connectors Crimp tool for manual crimping of machined
with female thread.........S7.000.900.152 crimp contacts up to 10 mm2 (AWG 8)
for power connectors ...................................
Plastic protective cap for connectors ...........................................S7.000.900.902
with male thread............S7.000.900.151 Crimp tool for manual crimping of machined
crimp contacts 16 mm2 (AWG 6) ..................
Brass protective cap for connectors with ...........................................S7.000.900.903
female thread.................S7.015.900.103

Brass protective cap for connectors with Brass protective cap with rope for
male thread....................S7.015.900.102 connectors with female thread ....................
Adaptor flange ...........................................S7.015.9S1.003
for Straight Connectors...S7.010.900.129 Brass protective cap with rope for
Conduit adaptor connectors with male thread ......................
Nylon Conduit DN 23.......S7.010.900.215 ...........................................S7.015.9S1.002
Nylon Conduit DN 29.......S7.010.900.217

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
66 Dimensions & Specifications may be changed without prior notice

M40 POWER CONNECTORS

INSERTS, CONTACTS

Contact Arrangement, Mating View Number of Poles Required Contacts

Insert for pins 2 + 3 + PE...............................................2 x crimp pins 2 mm
....................................................................................4 x crimp pins 3.6 mm

Insert for sockets 2 + 3 + PE.....................................2 x crimp sockets 2 mm
..............................................................................4 x crimp sockets 3.6 mm

V + Insert for pins 4 + 3 + PE...............................................4 x crimp pins 2 mm
- ...................................................................................4 x crimp pins 3.6 mm
U
W 1
2

Insert for sockets 4 + 3 + PE....................................4 x crimp sockets 2 mm
..............................................................................4 x crimp sockets 3.6 mm

* INSERT INCLUDED, CONTACTS ORDERED SEPARATELY*

Contacts Type Crimp Range Part Number

Crimp pin 2 mm, machined..............0.25 – 1 mm2 (AWG 24 – 17) ............S7.015.952.003*)
Crimp pin 2 mm, machined............0.75 – 4 mm2 (AWG 18 – 12) ...............S7.015.952.001

Crimp Socket 2 mm, machined........0.25 – 1 mm2 (AWG 24 – 17) ............S7.015.952.004*) M40 Power
Crimp socket 2 mm, machined......0.75 – 4 mm2 (AWG 18 – 12) ...............S7.015.952.002

Crimp pin 3.6 mm, machined.............1.5 – 4 mm2 (AWG 16 – 12)..............S7.015.953.601

Crimp socket 3.6 mm, machined .......1.5 – 4 mm2 (AWG 16 – 12)..............S7.015.953.602

Crimp pin 3.6 mm, machined........................6 mm2 (AWG 10).....................S7.015.953.611
Crimp socket 3.6 mm, machined ..................6 mm2 (AWG 10).....................S7.015.953.612

Crimp pin 3.6 mm, machined...............................AWG 8.............................S7.015.953.621
Crimp pin 3.6 mm, machined..............................10 mm2............................S7.015.953.623
Crimp socket 3.6 mm, machined ........................AWG 8..............................S7.015.953.622
Crimp socket 3.6 mm, machined .......................10 mm2.............................S7.015.953.624
Crimp pin 3.6 mm, machined........................16 mm2 (AWG 6).....................S7.015.953.631
Crimp socket 3.6 mm, machined...................16 mm2 (AWG 6).....................S7.015.953.632

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 67
Dimensions & Specifications may be changed without prior notice



STAINLESS STEEL CONNECTORS

FOR EXTREMELY ROUGH OR HYGIENIC USES

Mechanical Data Materials and Technical Data Special applications require special solutions. When
Housing extremely rough or hazardous environments are a
Stainless Steel V4A concern, Stainless Steel options are available. Offered
Housing surface 1.4404 (AISI 316 L) in the same pin-out configurations as the standard
Inserts Clear connectors, stainless steel housings will exceed your
Thermoplastic Polyamide PA 6 (Nylon 6/6), PBT demands. Available in M16, and M23 sizes. Other
Contacts Fire protection class V-0 sizes available by special order.
Contact surface at point of contact Brass Alloy
Minimum mating cycles Nickel and gold plated (0.25 μm)
Seals / O-Rings > 1000
Temperature range FKM, optional EPDM
Type of contacts signal M23 -40°F – 257°F (-40°C – 125°C)
Type of contacts power M23 Crimp, solder, dip-solder (PCB)
Type of contacts M16 Crimp
Protection Crimp, dip-solder (PCB)
IP 67 / IP 69K per EN 60529 (connected),
NEMA 4x

Additional Information page 19 Inserts and contacts see standard product page 24 - 26
Electrical data see standard product page 37 page 44 - 48
page 50 M16 Connectors page 56
M16 Connectors M23 Signal Connectors
M23 Signal Connectors M23 Power Connectors
M23 Power Connectors

*Stainless Steel Housings do not include inserts and contacts. Refer to INOX - Stainless Steel
applicable connector size and type sections for configuration options

! We do not recommend disconnecting or connecting Sealcon Connectors under load.

*Assembly Instructions can be found at www.SealconUSA.com or by calling us at 1-800-456-9012

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 69
Dimensions & Specifications may be changed without prior notice

STAINLESS STEEL CONNECTORS

HOUSINGS

M16 Straight Connector, Female Thread Cable-Ø Part Number

1.82” (46.3 mm) 3 – 6 mm (.12“ – .24“)..........................S7.814.300.000
5 – 9 mm (.20“ – .35“)..........................S7.814.400.000
ø 0.77” (19.7 mm) 8 – 11 mm (.31“ – .43“)........................S7.814.500.000

.70” (18.7m0”m)
(18 mm)

M16 Straight Connector, Male Thread Cable-Ø Part Number

1.88” (47.9 mm) 3 – 6 mm (.12“ – .24“)..........................S7.824.300.000
5 – 9 mm (.20“ – .35“)..........................S7.824.400.000
8 – 11 mm (.31“ – .43“)........................S7.824.500.000

M16 x 0.75

M16 Panel Connector, Male Thread (18.7m0”m) (18.7m0”m) Type Part Number
M16 x 0.75 4 x holes Ø 2.7 mm (.11“).....................S7.840.400.000
.78” (20 mm) Flange 20 x 20 mm
.59” (15 mm)
.92” (23.5 mm)
ø 2.7 mm

Panel hole

ø .59” (15 + 0.1 mm) Cable-Ø Part Part Number
Number EMC
M23 Signal Straight Connector, Female Thread
3 – 7 mm (.12 – .28“)......S7.140.300.000.........S7.141.300.000
2.32” (59 mm) 5 – 10 mm (.20 – .39“)....S7.140.400.000.........S7.141.400.000
7 – 12 mm (.27 – .47“)....S7.140.500.000.........S7.141.500.000
ø 1.03” (26.2 mm) 10 – 14 mm (.39 – .55“)...S7.140.600.000........S7.141.600.000

Assembly tool S7.010.900.127 is required

INOX - Stainless Steel (24.9m4”m) (22.8m6”m)

M23 Signal Straight Connector, Male Thread Cable-Ø Part Part Number
Number EMC
2.42” (61.5 mm)
.94” (24 mm) 3 – 7 mm (.12 – .28“) .....S7.240.300.000........S7.241.300.000
M23 x 1 5 – 10 mm (.20 – .39“)...S7.240.400.000..........S7.241.400.000
7 – 12 mm (.27 – .47“)...S7.240.500.000..........S7.241.500.000
10 – 14 mm (.39 – .55“)..S7.240.600.000........S7.241.600.000

(22.8m6”m)
*Stainless Steel Housings do not include inserts and contacts. Refer to
applicable connector size and type sections for configuration options

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
70 Dimensions & Specifications may be changed without prior notice

STAINLESS STEEL CONNECTORS

HOUSINGS

M23 Signal Panel Connector, Male Thread, Single Hole Mounted Type Part Number
Front mounting for male inserts
M23 x 1.5 .23” (6 mm) .92” (23.5 mm) .75” (19.1 + 0.1 mm) Thread M20 x 1.5...................................S7.420.400.000

(24.9m4”m) .79” (20.2 + 0.1) Panel hole * FOR MALE *
M 20 x 1.5: INSERTS ONLY
M20 x 1.5 /
PG 13.5 20.2 + 0.1 mm Type Part Number
Front mounting for female inserts
M23 Signal Panel Connector, Male Thread, Single Hole Mounted Thread M20 x 1.5...................................S7.421.400.000

M23 x 1.5 .75” (19.1 + 0.1 mm)

1.24” (31.5 mm) .94” (24 mm) .79” (20.2 + 0.1) * FOR FEMALE *
Panel hole INSERTS ONLY
.23” (6mm)
M20 x 1.5 / PG M 20 x 1.5: Type Part Number
13.5 20.2 + 0.1 mm With anti-vibration O-Ring
4 holes Ø 3.2 mm (.13“).........................S7.410.400.000
M23 Signal Panel Connector, Male Thread

.88” (22.5 mm)M23 x 1
.84” (21.5 mm)
ø 3.2
.98” (25 mm) mm
.77” (19.8 mm)
Panel hole
ø.77” (19.8 mm) ø.79” (20.1 + 0.1 mm)

M23 Signal Right Angle Panel Connector, Male Thread Type Part Number
4 holes Ø 2.7 mm (.11”).........................S7.430.400.000
1.96” (50 mm)
1.58” (40.2 mm) ø 2.7 mm
M23 x 1
.98” (25 mm) INOX - Stainless Steel
.77” (19.8 mm)
Panel hole
ø .77” (19.8 mm) ø .79” (20.1 + 0.1 mm)

M23 Power Straight Connector, Female Thread Type Part Number
7 – 12 mm (.27 – .47“)...........................S7.554.500.000
2.94” (74.8 mm) 11 – 17 mm (.43 – .67“).........................S7.554.600.000

ø 1.02” (26 mm)

*Stainless Steel Housings do not include inserts and contacts. Refer to
applicable connector size and type sections for configuration options

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 71
Dimensions & Specifications may be changed without prior notice

STAINLESS STEEL CONNECTORS Type Part Number
7 – 12 mm (.27 – .47“)........................S7.564.500.000
HOUSINGS 11 – 17 mm (.43 – .67“)......................S7.564.600.000

M23 Power Straight Connector, Female Thread

2.74” (69.6 mm)

M23 x 1

M23 Power Panel Connector, Male Thread, Single Hole Mounted .75” (19.1 + 0.1 mm) Type Part Number
Front mounting
M23 x 1 Thread M20 x 1.5................................S7.621.400.000

1.47” (37.5 mm) (216.0m2m” ) .79” (20.2 + 0.1 mm)
Panel hole
(6.2m3m” ) M20 x 1.5
ø .79” (20.2 + 0.1 mm)

M23 Power Panel Connector, Male Thread Type Part Number
For front mounting
M23 x 1 4 holes Ø 3.2 mm (.13“)......................S7.601.400.000
1.27” (32.5 mm) Optional: Flat gasket
.98” (25 mm) ø 3.2 mm
.77” (19.8 mm)
Panel hole
ø .78” (20 + 0.1 mm)

M23 Power Right Angle Panel Connector, Male Thread Type Part Number
4 holes Ø 2.7 mm (.11“)......................S7.630.400.000
1.96” (50 mm)
1.58” (40.2 mm) ø 2.7 mm
INOX - Stainless Steel M23 x 1
.98” (25 mm)
.77” (19.8 mm)

ø .77” (19.8 mm) Panel hole
ø .78” (20 + 0.1 mm)

*Stainless Steel Housings do not include inserts and contacts. Refer to applicable connector size and type sections for configuration options

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
72 Dimensions & Specifications may be changed without prior notice

STAINLESS STEEL CONNECTORS

ACCESSORIES

Plastic protective cap Assembly Tool....................S7.010.900.127
for connectors M16 with male thread .........
..........................................S7.000.980.161 Stainless Steel protective cap with rope
for connectors M16 with female thread ...... for connectors M16 with female thread
..........................................S7.000.980.162 70 mm .............................S7.010.9S4.163
for connectors M23 with male thread ......... Stainless Steel protective cap with rope for
..........................................S7.000.900.101 M23 Signal connectors with female thread
for connectors M23 with female thread ...... 100 mm ............................S7.010.9S4.103
..........................................S7.000.900.102 Stainless Steel protective cap with rope for
M23 Power connectors with female thread
Stainless Steel protective cap 100 mm ............................S7.010.9S4.183
for connectors M16 with female thread ......
..........................................S7.010.904.163 Stainless Steel protective cap with rope for
for connectors M23 Signal with female M16 connectors with male thread
thread ...............................S7.010.904.103 70mm ...............................S7.010.9S4.162
for connectors M23 Power with female Stainless Steel protective cap with rope for
thread ...............................S7.010.904.183 M23 connectors with male thread
100mm .............................S7.010.9S4.102
Stainless Steel protective cap
for connectors M16 with male thread ......... Crimp tool for manual crimping of
..........................................S7.010.904.162 machined crimp contacts for power and
for connectors M23 with male thread ......... signal connectors..............S7.000.900.901
..........................................S7.010.904.102

Crimp tool for manual crimping of
machined crimp contacts for signal
connectors M16 and M23............................
..........................................S7.000.900.904

INOX - Stainless Steel

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 73
Dimensions & Specifications may be changed without prior notice



Mechanical Data Materials and Technical Data MOLDED CORDSETS Molded Cordsets
Housing
Copper-Zinc alloy CUSTOM MOLDED CORDSETS
Molded strain relief Die Casting
Housing surface All cable and coupling connectors in the standard
Inserts Polyurethane PUR field - attachable series are also available as
overmolded variants. This includes M12 and M16
Contacts Nickel plated brass, black strain relief connectors, as well as M23 signal - and M23
Contact surface at point of contact power connectors. Sealcon also has the capability
Seals / O-Rings Thermoplastic Polyamide PA 6 (Nylon 6/6), PBT Fire of building custom configurations to your exacting
protection class V-0 specifications. Whether you are looking for a
Temperature range certain cable, connector material, or color, we can
Type of contacts Brass alloy source and provide you a complete solution to
Protection save you time and overhead.
Cable stlye Nickel and gold plated (0.25 μm)
Labeling
Buena-N standard
Optional FKM

-40°F – 257°F (-40°C – 125°C)

Crimp

IP 67 / IP 69K per EN 60529 (connected), NEMA 4x

Cable specifications available upon request

HUMMEL logo as standard, other options available
upon request

Additional Information page 19 Inserts and contacts see standard product page 24 - 26
Electrical data see standard product page 37 page 44 - 48
page 50 M16 Connectors page 56
M16 Connectors M23 Signal Connectors
M23 Signal Connectors M23 Power Connectors
M23 Power Connectors

*Custom solutions may require longer lead times and minimum quantities

! We do not recommend disconnecting or connecting Sealcon Connectors under load.
! Molded connector cordsets are also available as Stainless-Steel (INOX)-Versions.

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 75
Dimensions & Specifications may be changed without prior notice

Molded Cordsets MOLDED CORDSETS

CUSTOM MOLDED CORDSETS

M12 Power Molded Cordset
Molded connector cordsets

Inserts 13
76
AD
4

BC

4 2 1 5
5 1 6 4

2

3

*Please contact Sealcon for more information on specifications, configurations, and custom products

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
Dimensions & Specifications may be changed without prior notice

CUSTOM SOLUTIONS

DESIGN AND MANUFACTURING CAPABILITIES

Whether you are looking for a custom configuration or a
specialty product, we have options available. With a vertically
integrated, design, manufacturing, and distribution system, we
can manufacture what you are needing. Contact us today for
information.

Custom Solutions

In addition to the integrated strain relief, the flex nut adds Distribution-boxes are known as important components
kink protection to a cable – available for all connector for applications in automation. Robust and fully wired
sizes. they are done according to customers specification.
The connection achieves the protection class IP 67.

An integrated metalized EMI clamping insert grounds to Sealcon offers custom adapters for ANACONDA conduit
the braid significantly simplifying the assembly of the systems in hazardous locations.
elbow connector. The connection achieves the protection
class IP 67.

With the multi-insert, it is possible to set a ethernet and a power cable or multiple cables into one connector. The connection achieves
the protection class IP 67.

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 77
Dimensions & Specifications may be changed without prior notice

TECHNICAL INFORMATION

Technical Information Nominal Current Additional remarks (pollution level)
Allowable current (Amp), that can be transmitted by If connectors being defined for pollution degree
each contact continuously and simultaneously. 1 and overvoltage category 1 are applied for
other conditions (higher pollution degree and
Nominal Voltage higher overvoltage category) voltages level reduce
Allowable voltage (Volt), that can be applied to each correspondingly. But the connectors can be used
contact continuously and simultaneously. without any problems at reduced maximum voltages.

Test Voltage Mating cycles
Voltage which, under certain conditions, a connector Mating cycles are the number of insertion and
can be exposed to without breakdown. extraction cycles a connector can withstand before
the electrical or mechanical failure in relationship to
Degree of Protection the connector’s design specification.
Potential dirt accumulation of a disconnected
connector in a certain environment. Air gap
The minimum gap of air between two conducting
Degree of Protection 2 surfaces permissible at given voltage.
No permanent conductive dirt accumulation will
occur. Temporary conductive dirt accumulation, such Creep distance
as condensation, is possible. Typical for households, The minimum dimension along the surface of an
offices, laboratories and test labs. insulating material between two conducting surfaces.

Degree of Protection 3 PE
Conductive, as well as dry non-conductive dirt The PE-Contact is a ground contact for security reasons.
accumulation can occur. It can be temporarily
conductive due to condensation. Typical for industrial Safety Guidelines
and factory environments. When Sealcon connectors are used for voltages greater
than 50 Volts with conductive shell components they must
Derating M12 Power K+ L Coding be used in accordance with the safety regulations DIN
VDE Part 410; IEC 60364-4-41. This regulation basically
AWG 16 Straight connectors dictates that the power source should be turned off before
male + female M12 Power mating and unmating connector. This regulation does not
K- / L-Coding, wires 4 x provide protection against electrical shock when mating and
AWG 16 unmating connectors in the field.

! Do not connect or disconnect Sealcon Connectors
under load.

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
78 Dimensions & Specifications may be changed without prior notice

TECHNICAL INFORMATION

Derating M12 Power S+T Coding Derating M23 Signal

Straight connectors male + I [A]
female M12 Power
Straight Connectors male + 9
S- / T-Coding, wires 4 x 8
AWG 16 female M23 7

wires 12 x AWG 17 6
5
4

3

2

1

0 79
20 30 40 50 60 70 80 90 100 110 120 T [°C]

Derating M16 Derating M23 Power

Straight connectors male + I [A] Straight connectors male + I [A]
female M16 9 30
8
10 pole, wires 10 x AWG 7 female M23 25
18 6
5 20 Technical Information
4
3 5 + PE, wires 5 x AWG 12
2 15
1
0 10
20 30 40 50 60 70 80 90 100 110 120 T [°C]
5

0
20 30 40 50 60 70 80 90 100 110 120 T [°C]

Derating TWINTUS Derating M40 (Size 1.5)

TWINTUS and straight I [A] Straight connectors male + I [A]
connector female M16 18 female M40 60
16
4+3+PE, wires AWG 14 14 50
(Power) 12
10 pole, wires AWG 26 10 wires 3 x AWG 6 40
8 30
6
4 20
2
0 10
20 30 40 50 60 70 80 90 100 110 120 T [C]
0
20 30 40 50 60 70 80 90 100 110 120 T [°C]

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 79
Dimensions & Specifications may be changed without prior notice

INDEX

Part Number Page Part Number Page Part Number Page

Index S 7. 0 0 0 . 8 4 8 .101 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3 S7.003.920............................................30 S7.010.982.........................................24, 26
S 7. 0 0 0 . 8 4 8 .10 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3 S7.003.926............................................60 S7.010.9S0.702............................35, 43, 55
S7.000.900.101..................30,35,43,55,73 S7.003.943............................................24 S7.010.9S0.703.......................................43
S7.000.900.102..................30,35,43,55,73 S7.003.961............................................25 S7.010.9S0.704.......................................23
S7.000.900.151.......................................66 S7.003.981.........................................25,44 S7.010.9S0.705.......................................23
S7.000.900.152.......................................66 S7.003.983............................................24 S7.010.9S0.707......................................59
S7.000.900.901............................55,59,73 S7.003.985............................................25 S7.010.9S0.708.......................................59
S7.000.900.902.....................................66 S7.003.988............................................25 S7.010.9S0.783............................30, 35, 55
S7.000.900.903.......................................66 S7.004.912............................................45 S7.010.9S1.002............................35, 43, 55
S7.000.900.904.....................23,43,59,73 S7.004.917............................................46 S7.010.9S1.003.......................................43
S7.000.900.906.....................................30 S7.004.981............................................45 S7.010.9S1.083............................30, 35, 55
S7.000.900.907.......................................30 S7.010.900.101.......................................43 S7.010.9S4.102.....................................73
S7.000.900.908.....................................16 S7.010.900.102..................................35, 55 S7.010.9S4.103.....................................73
S7.000.900.DMC................................43, 55 S7.010.900.103.......................................43 S7.010.9S4.162.....................................73
S7.000.980.161................................23,73 S7.010.900.110.......................................59 S7.010.9S4.163.....................................73
S7.000.980.162................................23,73 S7.010.900.127.......................................73 S7.101.9S4.183.....................................73
S7.000.980.167.......................................59 S7.010.900.128.......................30, 35, 43, 55 S7.015.900.102.......................................66
S7.000.980.168.......................................59 S7.010.900.129 .......................................66 S7.015.900.103.......................................66
S7.000.9DM.C03....................................43 S7.010.900.135.....................................23 S7.015.9S1.002.....................................66
S7.000.9DM.C04....................................43 S7.010.900.139.....................................30 S7.015.9S1.003.....................................66
S7.000.9DM.C06....................................55 S7.010.900.14.......................................30 S7.015.95..............................................67
S7.000.9DM.C07....................................55 S7.010.900.151..................................23, 25 S7.053.9.............................................24, 25
S7.001.903............................................24 S7.010.900.162.......................................23 S 7. 0 8 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 6
S 7. 0 01 . 9 0 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4 S7.010.900.163.......................................23 S7.105....................................................43
S 7. 0 01 . 9 07. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4 S7.010.900.169.....................................59 S7.106...................................................38
S7.001.908............................................24 S7.010.900.170.......................................59 S7.108......................................................29
S7.001.910............................................25 S7.010.900.183.............................30, 35, 55 S7.110...................................................59
S7.001.912............................................45 S7.010.900.190.................16, 23, 35, 43, 55 S7.140...................................................70
S7.001.916............................................46 S7.010.900.191..................................16,23 S7.141....................................................70
S7.001.917............................................46 S7.010.900.192.............................35, 43, 55 S7.166...................................................38
S7.001.919............................................47 S7.010.900.200.....................................23 S7.206...................................................38
S7.001.920............................................30 S7.010.900.202.....................................23 S7.208...................................................29
S7.001.926............................................60 S7.010.900.205......................30, 35, 43, 55 S7.210...................................................59
S7.001.928............................................60 S7.010.900.207.......................30, 35, 43, 55 S7.240...................................................70
S7.001.943............................................24 S7.010.900.209......................30, 35, 43, 55 S7.241...................................................70
S7.001.961............................................25 S7.010.900.215.......................................66 S7.300...................................................39
S7.000.980............................................59 S7.010.900.217.......................................66 S7.301...................................................39
S 7. 0 01 . 9 81 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4 S7.010.900.531.....................................55 S7.306...................................................39
S7.001.983............................................24 S7.010.901.001.............................24, 26, 48 S7.308...................................................29
S7.001.985............................................25 S7.010.901.002.......................24, 26, 30, 48 S7.400...................................................39
S7.001.988............................................25 S7.010.901.012........................24, 26, 30, 48 S7.402...................................................39
S7.002.912............................................45 S7.010.901.021.......................................48 S7.404...................................................39
S7.002.917............................................46 S7.010.901.022 ..................................30, 48 S7.406...................................................39
S7.002.981............................................45 S7.010.901.031 .......................................48 S7.408...................................................29
S7.003.903............................................24 S7.010.901.04.......................................30 S7.410.0.............................................39, 59
S 7. 0 0 3 . 9 0 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4 S7.010.901.5.........................................48 S7.410.4................................................71
S 7. 0 0 3 . 9 07. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4 S7.010.902.001 ....................................48 S7.410.7................................................59
S7.003.908............................................24 S7.010.902.002 ....................................48 S7.412...................................................39
S7.003.910............................................24 S7.010.904.102 ....................................73 S7.414...................................................39
S7.003.912............................................45 S7.010.904.103 ....................................73 S7.416...................................................39
S7.003.916............................................46 S7.010.904.162.....................................73 S7.420.0................................................40
S7.003.917............................................46 S7.010.904.163.....................................73 S7.420.4................................................71
S7.003.919............................................47 S7.010.904.183.....................................73 S7.421.0................................................40
S7.010.908.102.....................................30 S7.421.4................................................71
S7.010.94..............................................56 S7.422...................................................40
S7.010.971............................................60
S7.010.980.6.................................24, 30, 56
S7.010.980.8.................................24, 25, 26
S7.010.981 ....................................24, 25, 26

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
80 Dimensions & Specifications may be changed without prior notice

INDEX

Part Number Page Part Number Page Part Number Page

S7.423...................................................40 S 7. 74 0 . 0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 SA712-7.L03...........................................17 Index
S7.425...................................................40 S7.742...................................................66 SA712-7.S10.............................................14
S7.430.4................................................71 S7.743......................................................66 SA712-7.S20.............................................14
S7.431...................................................41 S 7. 74 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5 SA712-7.S30.............................................14
S7.430...................................................41 S7.749...................................................65 SA712-7.S31 .............................................14
S7.435...................................................41 S7.810...................................................20 SA712-7.S40.............................................15
S7.439...................................................41 S7.811...................................................20 SA712-7.S42.0..........................................14
S 7. 4 4 0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 0 S7.814...................................................70 SA712-7.S42.2..........................................16
S 7. 4 4 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 0 S7.816...................................................20 SA712-7.S44.0..........................................14
S 7. 4 4 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 0 S7.820...................................................20 SA712-7.S44.2..........................................16
S 7. 4 4 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 0 S7.824...................................................70 SA712-7.S50.............................................15
S7.450...................................................41 S7.831...................................................20 SA712-7.S51.............................................15
S7.452...................................................41 S 7. 8 4 0 . 0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 SA712-7.S05.............................................17
S7.454...................................................41 S 7. 8 4 0 .1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 SA712-7.T05...........................................17
S7.456...................................................41 S 7. 8 4 0 . 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 SA7RJ-081M41.........................................35
S7.458...................................................42 S 7. 8 4 0 . 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 0 SA7RJ-081M6A.........................................35
S7.459...................................................42 S 7. 8 4 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 SA7RJ-821M51.........................................35
S7.460...................................................42 S 7. 8 4 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 SJEM04M12PG9BM50.............................11
S7.462...................................................42 S 7. 8 4 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 SJEM04M12PG9FM50..............................11
S 7. 4 6 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2 S 7. 8 47. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 SJFFC04M12050D.....................................9
S7.466...................................................42 S 7. 8 4 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 SJFFC05M12100D....................................10
S7.468...................................................29 S7.850...................................................22 SJFFCFMD04M12030D..............................9
S7.476...................................................38 S7.852...................................................20 SJFFCFMD04M12100D...............................9
S7.486...................................................38 S7.R10.4................................................33 SJFFCFMD05M12100D.............................10
S7.490...................................................42 S7.R20.4................................................33 SJFFD04M12050D.....................................9
S7.491...................................................42 S7.R40.0................................................33 SJFFD04M12050D...................................10
S7.492...................................................43 S7.R41.0................................................33 SJFFD05M12020D...................................10
S7.550...................................................51 S7.R42.0................................................34 SJFFDFMC04M12030D..............................9
S7.554...................................................71 S7.R43.1................................................34 SJFFDFMC04M12100D...............................9
S7.556...................................................51 S7.R45.0................................................34 SJFFDFMC05M12100D.............................10
S7.560...................................................51 S7.R47.4................................................35 SJFFDFMC08M12100D.............................11
S 7. 5 6 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2 S7.R50.0................................................34 SJFFDFMD03M8020D................................8
S7.566...................................................51 S7.R52.4................................................35 SJFFDFMD03M8050D................................8
S7.576....................................................52 SA712-7.000.............................................16 SJFFDFMD04M12100D..............................9
S7.580...................................................52 SA712-7.001.908...................................26 SJFFDFMD04M12100E...............................9
S7.601.0................................................52 SA712-7.001.912...................................26 SJFFDFMD05M12100D............................10
S7.601.4................................................72 SA712-7.010.900...................................16 SJFMD04M12050D....................................9
S7.605...................................................52 SA712-7.010.901...................................17 SJFMD05M12020D..................................10
S7.621.0................................................53 S A 71 2 - 7. 01 0 . 91 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 SJFMD05M12100D..................................10
S7.621.4................................................72 SA712-7.010.9S0......................................16 STAD1-7P2510..............21, 34, 39, 40, 41, 54
S7.623...................................................53 SA712-7.K03.............................................17 STAD2-7P2510.................................... 39, 40
S7.626...................................................53 SA712-7.K10.............................................14 STAD3-7P2510....................................41, 42
S7.630.4................................................72 SA712-7.K20............................................14 STAD4-7P2510....................................41, 42
S7.635...................................................54 SA712-7.K30............................................14
S7.636...................................................54 SA712-7.K31 .............................................14
S7.638...................................................54 SA712-7.K40............................................15
S7.639....................................................54 SA712-7.K42.0.........................................14
S 7. 6 41 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2 SA712-7.K42.1.........................................14
S 7. 6 4 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2 SA712-7.K42.2.........................................16
S7.651...................................................53 SA712-7.K44.0.........................................15
S7.653...................................................52 SA712-7.K44.1.........................................15
S7.661...................................................53 SA712-7.K44.2.........................................16
S7.681...................................................51 SA712-7.K50............................................15
S7.683...................................................51 SA712-7.K51 .............................................15
S7.710...................................................63
S7.716...................................................63
S 7. 7 2 0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 81
Dimensions & Specifications may be changed without prior notice

HAZARDOUS ENVIRONMENT CONNECTORS

VISIT WWW.SEALCONEX.COM FOR DETAILS AND OPTIONS AVAILABLE

Intrinsically Safe Products

Ex-i
RJ45 Ethernet
Connectors

RJ45 Approvals:
BVS 11 Atex E 177
II M1 Ex ia I Ma
II 1 G Ex ia IIC Ta Ga

HAZARDOUS ENVIRONMENT CABLE GLANDS

VISIT WWW.SEALCONEX.COM FOR DETAILS AND OPTIONS AVAILABLE

Many of Sealcon’s strain relief fittings and circular connectors are available
with EX / ATEX approvals. For more information, please visit our Sealcon EX
website: www.SealconEX.com

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012
82 Dimensions & Specifications may be changed without prior notice

www.SealconUSA.com | (303) 699-1135 | (800) 456-9012 Sealcon has a large assortment of cable
Dimensions & Specifications may be changed without prior notice management solutions available including:

• Cable Glands / Cord Grips
• Conduit Systems
• Adapters, Reducers, and Enlargers
• Locking Nuts
• Enclosures

Further information on the products presented here and everything else Sealcon has to offer
can be found on our website:
www.SealconUSA.com
Our website is consistently updated with new information. Sealcon catalogs, product
announcements, videos and reference guides are also available for download online.

Leading Provider of Cable Management Solutions

CC0818 7374 S. Eagle Street Centennial, CO 80112 USA linkedin.com/company/sealcon CONC19.1
800-456-9012 / 303-699-1135 facebook.com/SealconLLC
[email protected] twitter.com/Sealcon
www.SealconUSA.com vimeo.com/sealcon