Kohler Catalogue 2022/2023

Intelligent Toilets kohler.co.nz 049

TOILETS Intelligent Toilets 050 KOHLER Toilets 533 438 1027 215 Finished wall Finished floor 675 208 308 Finished floor 150 1265±4 254±3 35±2 100±3 438±3 478±3 10~230 Feet height is adjustable Factory pre-set height: 55 Pan fixing holes From finished floor to pan fixing hole centres Finished wall Finished floor 675 208 308 F1265±4 254±3 35±2 100±3 438±3 478±3 10~230 Feet height is adjustable Factory pre-set height: 55 Pan fixing holes From finished floor to pan fixing hole centres Finished wFinished floor 675 1265±4 254±3 35±2 100±3 438±3 478±3 10~230 Feet height is adjustable Factory pre-set height: 55 Pan fixing holes In Wall View Veil Wall Faced Intelligent Toilet Side View Front View Toilet Features • WELS 4 star, dual flush 4.5/3L • Touchless or manual flush button panel • Ergonomic French curve seat with antibacterial material • Sensor activated auto open and close function for seat lid • Insulated in-wall cistern – fully framed • Build in LED night-light • Deodoriser function • Rimless pan design • Vitreous china • S-trap only Bidet Features • Instantly heated water with stainless steel wand • Spray wand features adjustable water pressure and temperature. • Select massage/spiral spray pattern • Air blower and heated seat with adjustable temperature • Self-cleaning and UV sanitising nozzle Code: 8423A-0 One Touch Remote Please Note: Maximum weight limit for the seat is 136kg and 400kg limit for the fixing of wall hung toilet. Veil must be installed in accordance with AS/NZS 3500.1, which will require the installation of a high hazard backflow prevention device (not supplied). Please consult with your registered Plumber or Hydraulic Consultant. Rated voltage: 220–240V, 50/60Hz. Rated power: 1100W. Max instant power: 1600W.

Intelligent Toilets kohler.co.nz 051 1265±4 254±3 35±2 100±3 438±3 478±3 10~230 435 438 1027 (* adjustable) 215 Finished wall Finished floor 675 208 308 Finished floor Pan fixing holes 150 398 (*adjustable) From finished floor to pan fixing hole centres Feet height is adjustable Factory pre-set height: 55 1265±4 254±3 35±2 100±3 438±3 478±3 10~230 Finished wall Finished floor 675 208 308 Pan fixing holes 398 (*adjustable) From finished floor to pan fixing hole centres Feet height is adjustable Factory pre-set height: 55 1265±4 254±3 35±2 100±3 438±3 478±3 10~230 Finished wFinished floor 675 Pan fixing holes Feet height is adjustable Factory pre-set height: 55 In Wall View Side View Front View Toilet Features • WELS 4 star, dual flush 4.5/3L • Touchless or manual flush button panel • Ergonomic French curve seat with antibacterial material • Sensor activated auto open and close function for seat lid • Insulated in-wall cistern – fully framed • Build in LED night-light • Deodoriser function • Rimless pan design • Vitreous china Bidet Features • Instantly heated water with stainless steel wand • Spray wand features adjustable water pressure and temperature. • Select massage/spiral spray pattern • Air blower and heated seat with adjustable temperature • Self-cleaning and UV sanitising nozzle Code: 5402A-0 Veil Wall Hung Intelligent Toilet One Touch Remote Please Note: Maximum weight limit for the seat is 136kg. Veil must be installed in accordance with AS/NZS 3500.1, which will require the installation of a high hazard backflow prevention device (not supplied). Please consult with your registered Plumber or Hydraulic Consultant. Rated voltage: 220–240V, 50/60Hz. Rated power: 1100W. Max instant power: 1600W.

Bathing KOHLER engineers our baths so that nothing comes between you, your bathing preferences and all-encompasing comfort. Our baths are ergonomically crafted to gently support the natural curves and angles of the body. Discover the perfect design to complement your ideal bathing experience and the look you’re aspiring to for your bathroom. Whether you want to make a statement or are after a more subtle look, KOHLER baths will add that extra special feel of quality.

053

KOHLER Bathing bathing freestanding 054 70 408 758 612 1705 50 70 408 758 612 1705 50 Evok D-Shape Freestanding Bath Features • Back-to-wall acrylic freestanding bath • 40mm chrome pop-up waste and overflow • Fitted upstand for tiling available L 1705 x W 758 x D 612 Internal Measurements Seating Width: 465mm Base Length: 1050mm Depth: 423mm Capacity to Overflow: 228L Dry Weight: 37kg Freestanding Bath Code: 22161A-0 Freestanding Bath with Upstand Code: 22161A-1UP-0 Top View Side View

freestanding kohler.co.nz 055 ø1500 750 610 5 1128 1700 850 750 1700 1450 850 750 610 5 1600 800 750 25163A-0 25164A-0 25165A-0 25166A-0 ø1500 750 610 5 1128 1700 850 750 610 5 1377 622 1700 1450 850 750 610 5 1600 1350 800 750 610 5 1500 1250 750 750 610 5 25163A-0 25164A-0 25165A-0 25166A-0 25167A-0 610 5 1377 622 1350 610 5 1500 1250 750 750 610 5 25167A-0 ø1500 750 610 5 1128 1700 850 1700 1450 850 750 610 5 1600 800 25163A-0 25164A-0 25165A-0 25166A-0 ø1500 750 610 5 1128 1700 850 750 610 5 1377 622 1700 1450 850 750 610 5 1600 1350 800 750 610 5 1500 1250 750 750 610 5 25163A-0 25164A-0 25165A-0 25166A-0 25167A-0 610 5 1377 622 1350 610 5 1500 1250 750 750 610 5 25167A-0 1700mm 1500mm Side View 1700mm Side View 1600mm Side View Evok 2.0 Seamless Oval Freestanding Bath Features • Available in three sizes • Seamless, smooth gloss finish, Slimline acrylic freestanding bath • Extra slim 25mm rim • Ergonomically designed • 40mm chrome pop-up waste and overflow 1500mm L 1500 x W 750 x D 610 Internal Measurements Seating Width: 564mm Base Length: 927mm Depth: 410mm Capacity to Overflow: 228L Dry Weight: 42kg Code: 25167A-0 1600mm L 1600 x W 750 x D 610 Internal Measurements Seating Width: 564mm Base Length: 1027mm Depth: 410mm Capacity to Overflow: 256L Dry Weight: 49kg Code: 25166A-0 1700mm L 1700 x W 750 x D 610 Internal Measurements Seating Width: 564mm Base Length: 1127mm Depth: 410mm Capacity to Overflow: 284L Dry Weight: 53kg Code: 25165A-0 1500mm Top View 1700mm Top View 1600mm Top View Pictured: Evok 2.0 Seamless Oval Freestanding Bath

KOHLER Bathing bathing freestanding 056 ø1500 750 610 5 1128 1700 850 750 610 5 1377 625163A-0 25164A-0 ø1500 750 610 5 1128 1700 850 750 610 5 1377 625163A-0 25164A-0 762 610 1352 1675 837.5 762 610 1352 1675 837.5 Features • Seamless, smooth gloss finish, Slimline acrylic freestanding bath • Extra slim 25mm rim • Ergonomically designed • 40mm chrome pop-up waste and overflow L 1500 x W 1500 x D 610 Internal Measurements Seating Width: 908mm Base Length: 1128mm Depth: 410mm Capacity to Overflow 390L Dry Weight 58kg Code: 25163A-0 Top View Side View Evok 2.0 Seamless Round Freestanding Bath Evok 2.0 Seamless Rectangular Freestanding Bath Features • Seamless, smooth gloss finish, Slimline acrylic freestanding bath • Extra slim 25mm rim • Ergonomically designed • 40mm chrome pop-up waste and overflow L 1675 x W 762 x D 610 Internal Measurements Seating Width: 432mm Base Length: 1352mm Depth: 410mm Capacity to Overflow 235L Dry Weight 53kg Code: 25164A-0 Top View Side View Pictured: Veil Lithocast Gloss Freestanding Bath

bathing lithocast kohler.co.nz 057 1649 411 494 954 619 419 1649 411 494 954 619 419 Veil Lithocast Gloss Freestanding Bath Features • 400mm soaking bath • Sloped lumbar support • 40mm chrome pop-up waste and overflow L 1676 x W 954 x D 619 Internal Measurements Seating Width: 730mm Base Length: 1130mm Depth: 419mm Capacity to Overflow 312L Dry Weight 108kg Code: 8331A-0 Top View Side View

058 KOHLER Bathing bathing drop-in Odeon Drop-In Baths Features • Drop in acrylic bath (fully reinforced) • Upstand/tiling bead 1520mm L 1520 x W 760 x D 482 Internal Measurements Seating Width: 480mm Base Length: 1065mm Depth: 465mm Capacity to Overflow 230L Dry Weight 15kg Code: 18221A-0 1670mm L 1670 x W 760 x D 482 Internal Measurements Seating Width: 480mm Base Length: 1215mm Depth: 465mm Capacity to Overflow 260L Dry Weight 20kg Code: 18223A-0 Top View Side View Patio Drop-in Baths Features • Available in two sizes • Drop in acrylic bath (fully reinforced) 1675mm L 1675 x W 820 x D 520 Internal Measurements Seating Width: 510mm Base Length: 1245mm Depth: 492mm Capacity to Overflow 300L Dry Weight 20kg Code: 18227A-0 1800mm L 1800 x W 820 x D 538 Internal Measurements Seating Width: 510mm Base Length: 1170mm Depth: 510mm Capacity to Overflow 330L Dry Weight 25kg Code: 18225A-0 1675mm Top View 1800mm Top View For side views, please refer to technical drawings on the website. 1800mm Pictured: Regatta Drop-in Bath

kohler.co.nz 059 drop-in 1675mm Regatta Drop-In Baths Features • Chrome rail • Rail fixing kit • Available in two sizes • Bath pillow in charcoal included 1675mm L 1675 x W 760 x D 520 Internal Measurements Seating Width: 460mm Base Length: 1145mm Depth: 510mm Capacity to Overflow 230L Dry Weight 20kg Code: 11301A-0 1800mm L 1800 x W 760 x D 520 Internal Measurements Seating Width: 460mm Base Length: 1280mm Depth: 510mm Capacity to Overflow 300L Dry Weight 25kg Code: 11300A-0 Top View Side View

Tapware & Accessories The simple act of drawing water is elemental to our well-being, our rituals and how we define ourselves as human beings. KOHLER tapware celebrates that relationship – with beautiful design inside and out, effortless water delivery and water-saving efficiency. In fact, each and every KOHLER tap has a design intent, written to fulfil the rapidly changing requirements of water delivery in the 21st century.

061

KOHLER Tapware & Accessories tapware & accessories 062 149 Ø51 120 123 151 191 135 Ø51 123 151 191 135 Ø51 149 120 Avid Duo Deck Mount Sensor Tap & Soap Dispenser Composed Deck Mount Sensor Tap Features • AC power only (adaptor included) • TOF (time of flight) sensor is more accurate than an infra red sensor • 1.5L soap bottle capacity installed under-bench • WELS Rating: 6 Star, 1.6 litres/min Code: EX29936A-N-CP Sensor Taps Experience the latest in technology and hygiene with this touchless tapware range. Upgrade your bathroom or powder room with versatile sprays, touchless technology, and on-trend designs. Front View Front View Side View Side View Notes: Sensor activates under the spout which may not suit all project requirements. Supplied as cold only option: Hot & Cold is achieved via a tempering valve (an off the shelf component installed by a plumber). Notes: Sensor activates under the spout which may not suit all project requirements. Supplied as cold only option: Hot & Cold is achieved via a tempering valve (an off the shelf component installed by a plumber). Features • AC & DC power options – sold separately • TOF (time of flight) sensor is more accurate than an infra red sensor • WELS Rating: 6 Star Tap only: Polished Chrome 1.2 L/min Code: ex20257a-nwS5-CP Polished Chrome 1.3 L/min Code: ex20257a-nwS3-CP Polished Chrome 1.7 L/min Code: ex20257a-nw-CP Brushed Nickel 1.7 L/min Code: ex20257a-nw-BN AC/DC power options sold separately: AC Power Unit, 6V Code: 26845A-NA DC Power Unit, 6V Code: 26844T-NA Polished Chrome (CP) Brushed Nickel (BN) Matte Black* (BL) French Gold (AF)

kohler.co.nz 063 Avid Duo deck mount sensor tap and soap dispenser Cutting-edge technology with two-in-one design (water flow & soap dispenser) provides Avid Duo a completely touchless hand-washing experience. Add more brilliance to your bathroom space. Whether design, colour or performance, KOHLER always offers discerning choices for bathroom spaces. Multiple washing options combine with unique automatic sensors to provide a convenient, hygienic system. Invisible sensor technology A hidden sensor inside the spout brings a consistent and precise experience. Water saving technology Saving water without sacrificing performance, 30% less water usage than LEED standard. Water Wave for Soap Soap Dispensing Wash and Rinse

KOHLER Tapware & Accessories tapware & accessories 064 Ø60 2° 7 215 234 36 15 2° 7 215 234 15 Composed Wall Mount Sensor Tap Features • AC & DC power options – sold separately • TOF (time of flight) sensor is more accurate than an infra red sensor • WELS Rating: 6 Star Tap only: Polished Chrome 1.3 L/min Code: ex25998a-nwS5-CP Polished Chrome 1.4 L/min Code: ex25998a-nwS3-CP Polished Chrome 1.6 L/min Code: ex25998a-nw-CP Brushed Nickel 1.9 L/min Code: ex25998a-nw-BN AC/DC power options sold separately: AC Power Unit, 6V Code: 26845A-NA DC Power Unit, 6V Code: 26844T-NA Front View Side View Notes: Sensor activates under the spout which may not suit all project requirements. Supplied as cold only option: Hot & Cold is achieved via a tempering valve (an off the shelf component installed by a plumber).

kohler.co.nz 065 Pictured: Components Deck Mount Sensor Tap, French Gold Finish 100° 255 240 Ø60 Ø30 197 100° 255 240 30 Ø60 Ø60 Ø30 Ø29 197 174 206 Front View Front View Side View Side View Components Wall Mount Sensor Tap Components Deck Mount Sensor Tap Notes: Sensor activates under the spout which may not suit all project requirements. Supplied as cold only option: Hot & Cold is achieved via a tempering valve (an off the shelf component installed by a plumber). Notes: Sensor activates under the spout which may not suit all project requirements. Supplied as cold only option: Hot & Cold is achieved via a tempering valve (an off the shelf component installed by a plumber). Features • AC & DC power options – sold separately • TOF (time of flight) sensor is more accurate than an infra red sensor • WELS Rating: 6 Star Tap only: Polished Chrome 1.3 L/min Code: EX27462A-nwS3-CP Polished Chrome 1.6 L/min Code: EX27462A-nw-CP Brushed Nickel 1.6 L/min Code: EX27462A-nw-BN Matt Black 1.6 L/min Code: EX27462A-nw-BL French Gold 1.6 L/min Code: EX27462A-nw-AF AC/DC power options sold separately: AC Power Unit, 6V Code: 26845A-NA DC Power Unit, 6V Code: 26844T-NA Features • AC & DC power options – sold separately • TOF (time of flight) sensor is more accurate than an infra red sensor • WELS Rating: 6 Star Tap only: Polished Chrome 1.3 L/min Code: EX27460A-nwS3-CP Polished Chrome 1.6 L/min Code: EX27460A-nw-CP Brushed Nickel 1.6 L/min Code: EX27460A-nw-BN Matt Black 1.6 L/min Code: EX27460A-nw-BL French Gold 1.6 L/min Code: EX27460A-nw-AF AC/DC power options sold separately: AC Power Unit, 6V Code: 26845A-NA DC Power Unit, 6V Code: 26844T-NA

KOHLER Tapware & Accessories tapware & accessories 066 1. Choose your spout. 2. Choose your handle. 3. Choose your finish. Mix and match with the Components™ Collection. Every spout, handle and finish of the Components™ collection is designed to be freely combined with one another to create a signature modern look in the bath. It is a versatile collection that was designed to be designed.

kohler.co.nz 067 Designed to be Designed Components™ is a full collection for the contemporary bathroom that speaks to the many facets of modern design. Every element, from spouts and handles to the accessories that complete the space, is designed to feel like a minimalist piece of modern sculpture. The collection invites you to design your own signature look by combining a faucet spout with your style of handles. The different spout and handle combinations within this curated collection allow you to bring a touch of personality into the room. Once you have found a style that speaks to your taste, select your finish and bring the entire room together with Components™ showering designs and accessories. With different combinations creating distinct looks, Components™ is a versatile collection that was designed to be designed. By you. Modern Form Designers paid meticulous attention to every line and angle to create the controlled forms and stark precision of the Components™ collection’s spouts. Modern Function Each handle within the Components™ collection is distinct and features a unique activation with intuitive control.

KOHLER Tapware & Accessories tapware & accessories 068 basin mixer Ø41.5 Ø48Ø25 5 178 138 129 93 45° tall basin mixer Ø41.5 Ø48 Ø25 285 187 178 200 5 45° super tall basin mixer 270 Ø25 355 187 178 45° Ø41.5 Ø48 5 Components Create your own signature look by combining a basin or bath spout with your style of handles. Available in four finishes: Polished Chrome, Moderne Brushed Brass, Brushed Nickel and Matte Black*. Brushed Nickel Moderne Brushed Brass Matte Black Components Super Tall Basin Mixer Features • Single pin handle allows for both volume and temperature control • Temperature memory allows mixer to be turned on and off at the temperature set during prior usage • WELS Rating: 5 Star, 6 litres/min Polished Chrome Code: 77960T-4AND-CP Brushed Nickel Code: 77960T-4AND-BN Brushed Brass Code: 77960T-4AND-2MB Matte Black Code: 77960T-4AND-BL Side View Side View Side View Components Basin Mixer Components Tall Basin Mixer Features • Single pin handle allows for both volume and temperature control • Temperature memory allows mixer to be turned on and off at the temperature set during prior usage • WELS Rating: 5 Star, 6 litres/min Polished Chrome Code: 77958T-4AND-CP Brushed Nickel Code: 77958T-4AND-BN Brushed Brass Code: 77958T-4AND-2MB Matte Black Code: 77958T-4AND-BL Features • Single pin handle allows for both volume and temperature control • Temperature memory allows mixer to be turned on and off at the temperature set during prior usage • WELS Rating: 5 Star, 6 litres/min Polished Chrome Code: 77959T-4AND-CP Brushed Nickel Code: 77959T-4AND-BN Brushed Brass Code: 77959T-4AND-2MB Matte Black Code: 77959T-4AND-BL Polished Chrome (CP) Brushed Nickel (BN) Moderne Brushed Brass (2MB) Matte Black* (BL)

kohler.com.au 069 tube basin spout Ø25 160 10º 271 170 Ø60 ribbonbasin spout 32 11 Ø60 160 263 170 10º tube basin spout Ø25 160 10271 170 Ø60 ribbonbasin spout 32 11 Ø60 160 263 170 tube bath spout Ø60 Ø27 191 319 199 10º tube bath spout Ø60 Ø27 191 319 199 10º ribbon bath spout Ø60 41 16 203 333 10º 211 ribbon bath spout Ø60 41 16 203 333 10º 211 Polished Chrome Components Hob Mount Ribbon Basin Spout Moderne Brushed Brass *Spout only *Spout only Components Hob Mount Tube Basin Spout Features • Premium metal construction • A range of interchangeable Components handles available • WELS Rating: 5 Star, 6 litres/min Polished Chrome Code: 77967T-ND-CP Brushed Nickel Code: 77967T-ND-BN Brushed Brass Code: 77967T-ND-2MB Matte Black Code: 77967T-ND-BL Features • Premium metal construction • A range of interchangeable Components handles available • WELS Rating: 5 Star, 6 litres/min Polished Chrome Code: 77968T-ND-CP Brushed Nickel Code: 77968T-ND-BN Brushed Brass Code: 77968T-ND-2MB Matte Black Code: 77968T-ND-BL Front View Front View Side View Side View Brushed Nickel *Spout only Front View Side View Components Hob Mount Tube Bath Spout Features • Premium metal construction • A range of interchangeable Components handles available Polished Chrome Code: 22959T-CP Brushed Nickel Code: 22959T-BN Brushed Brass Code: 22959T-2MB Matte Black Code: 22959T-BL Polished Chrome *Spout only Components Hob Mount Ribbon Bath Spout Features • Premium metal construction • A range of interchangeable Components handles available Polished Chrome Code: 26151T-CP Brushed Nickel Code: 26151T-BN Brushed Brass Code: 26151T-2MB Matte Black Code: 26151T-BL Front View Side View

KOHLER Tapware & Accessories tapware & accessories 070 industrial handles Ø60 Ø70 44 203 100-300 Ø60 31 lever handles 71.5 40 203 oyl handles Ø61 38 203 Components Hob Mount Rocker Handle Features • Premium metal construction • A range of interchangeable Components spouts available • Valves included Polished Chrome Code: 77963T-8ADR-CP Brushed Nickel Code: 77963T-8ADR-BN Brushed Brass Code: 77963T-8ADR-2MB Matte Black Code: 77963T-8ADR-BL Brushed Nickel Components Hob Mount Industrial Handles • Premium metal construction • A range of interchangeable Components spouts available • Valves included Polished Chrome Code: 77990T-9DR-CP Brushed Nickel Code: 77990T-9DR-BN Brushed Brass Code: 77990T-9DR-2MB Matte Black Code: 77990T-9DR-BL Moderne Brushed Brass Front View Front View Pictured: Components Hob Rocker Handles Front View Components Hob Mount Lever Handles Features • Premium metal construction • A range of interchangeable Components spouts available • Valves included Polished Chrome Code: 77990T-4DR-CP Brushed Nickel Code: 77990T-4DR-BN Brushed Brass Code: 77990T-4DR-2MB Matte Black Code: 77990T-4DR-BL Matte Black Front View Polished Chrome Components Hob Mount Oyl Handles Features • Premium metal construction • A range of interchangeable Components spouts available • Valves included Polished Chrome Code: 77990T-8DR-CP Brushed Nickel Code: 77990T-8DR-BN Brushed Brass Code: 77990T-8DR-2MB Matte Black Code: 77990T-8DR-BL

kohler.co.nz 071 58 Ø27 Ø60 M28×1 41 57 lever handle Ø60 M28×1 41 57 5Ø60 M28×1 41 57 leveFront View Side View Components Wall Mount Lever Handles Features • Premium metal construction • A range of interchangeable Components spouts available Polished Chrome Code: 77981T-4-CP Brushed Nickel Code: 77981T-4-BN Brushed Brass Code: 77981T-4-2MB Matte Black Code: 77981T-ZZ-BL Add Valve* – Valve Code: 28139T-DR-NA Moderne Brushed Brass *Handles only *Note: Valve must be purchased in addition to handles.

KOHLER Tapware & Accessories tapware & accessories 072 38º Ø60 32 11 235~245 296 The finished wall ribbon basin spout Ø60 45º 278Ø25 235~245 The finished wall tube basin spout Ø70 Ø60 M28×1 44.5 61 industrial handle Ø60 M28×1 44.5 61 inØ60 M28×1 44.5 61 indØ61 M28×1 5438 oyl handle Ø61 M28×1 5438 oyØ61 M28×1 5438 oyØ61 M28×1 5438 oyl hComponents Wall Mount Ribbon Basin Spout Features • Premium metal construction • A range of interchangeable Components handles available • WELS Rating: 5 Star, 6 litres/min Polished Chrome Code: 23888T-ND-CP Brushed Nickel Code: 23888T-ND-BN Brushed Brass Code: 23888T-ND-2MB Matte Black Code: 23888T-ND-BL Polished Chrome Side View *Spout only Components Wall Mount Tube Basin Spout Features • Premium metal construction • A range of interchangeable Components handles available • WELS Rating: 5 Star, 6 litres/min Polished Chrome Code: 23890T-ND-CP Brushed Nickel Code: 23890T-ND-BN Brushed Brass Code: 23890T-ND-2MB Matte Black Code: 23890T-ND-BL Brushed Nickel Side View *Spout only Front View Side View Components Wall Mount Industrial Handles Features • Premium metal construction • A range of interchangeable Components spouts available Polished Chrome Code: 77981T-9-CP Brushed Nickel Code: 77981T-9-BN Brushed Brass Code: 77981T-9-2MB Matte Black Code: 77981T-ZX-BL Add Valve* – Valve Code: 28139T-DR-NA Polished Chrome *Handles only Components Wall Mount Oyl Handles Features • Premium metal construction • A range of interchangeable Components spouts available Polished Chrome Code: 77981T-8-CP Brushed Nickel Code: 77981T-8-BN Brushed Brass Code: 77981T-8-2MB Matte Black Code: 77981T-ZY-BL Add Valve* – Valve Code: 28139T-DR-NA Front View Side View Polished Chrome *Handles only *Note: Valve must be purchased in addition to handles. *Note: Valve must be purchased in addition to handles.

kohler.co.nz 073 Ø60 Ø27 10º 27817 235~245 The finished wall row basin spout 17 Ø42 8 71 6 Ø60 single lever handle 17 Ø42 8 71 6 Ø60 single lever handle Ø5 91 8 6 Ø42 Ø60 single pin lever handle Ø5 91 8 6 Ø42 Ø60 single pin lever handle 240 Fringe of bath The finished wall 45º G1/2˝ Ø60 Ø27 45 Recommended 162 tube bath spout Side View Moderne Brushed Brass Components Wall Mount Row Basin Spout Features • Premium metal construction • A range of interchangeable Components handles available • WELS Rating: 5 Star, 6 litres/min Polished Chrome Code: 23889T-ND-CP Brushed Nickel Code: 23889T-ND-BN Brushed Brass Code: 23889T-ND-2MB Matte Black Code: 23889T-ND-BL *Spout only Front View Side View Components Wall Mount Lever Mixer Polished Chrome Mixer – Polished Chrome Code: 77980T-4-CP Add Valve* – Polished Chrome Code: 28138T-DR-CP Mixer – Brushed Nickel Code: 77980T-4-BN Add Valve* – Brushed Nickel Code: 28138T-DR-BN Mixer – Brushed Brass Code: 77980T-4-2MB Add Valve* – Brushed Brass Code: 28138T-DR-2MB Mixer – Matte Black Code: 77980T-ZZ-BL Add Valve* – Matte Black Code: 28138T-DR-BL Front View Side View Components Wall Mount Pin Lever Mixer Polished Chrome Mixer – Polished Chrome Code: 77980T-4A-CP Add Valve* – Polished Chrome Code: 28138T-DR-CP Mixer – Brushed Nickel Code: 77980T-4A-BN Add Valve* – Brushed Nickel Code: 28138T-DR-BN Mixer – Brushed Brass Code: 77980T-4A-2MB Add Valve* – Brushed Brass Code: 28138T-DR-2MB Mixer – Matte Black Code: 77980T-ZY-BL Add Valve* – Matte Black Code: 28138T-DR-BL Moderne Brushed Brass *Spout only Components Wall Mount Tube Bath Spout Features • Premium metal construction • A range of interchangeable Components handles available Polished Chrome Code: 77999T-CP Brushed Nickel Code: 77999T-BN Brushed Brass Code: 77999T-2MB Matte Black Code: 77999T-BL Side View *Note: Valve must be purchased in addition to handle. *Note: Valve must be purchased in addition to handle.

KOHLER Tapware & Accessories tapware & accessories 074 Ø100 KOHLER 32~52 3.5 14 110 85 pin lever S/B mixer Ø100 KOHLER 32~52 3.5 14 110 85 pin lever S/B mixer Ø100 KOHLER 32~52 3.5 14 100 75 lever S/B mixer Ø100 KOHLER 32~52 3.5 14 100 75 lever S/B mixer KOHLER 110 8565 Ø160 32~52 3.5 14 pin lever S/B mixer (diverter) KOHLER 110 8565 Ø160 32~52 3.5 14 pin lever S/B mixer (diverter) KOHLER 100 7565 Ø160 32~52 3.5 14 lever S/B mixer (diverter) KOHLER 100 7565 Ø160 32~52 3.5 14 lever S/B mixer (diverter) Polished Chrome Matte Black Brushed Nickel Polished Chrome Components Shower or Bath Mixer (Pin Lever) Features • Premium metal construction Polished Chrome Code: 21398T-4A-CP Brushed Nickel Code: 21398T-4A-BN Brushed Brass Code: 21398T-4A-2MB Matte Black Code: 21398T-4A-BL Add Valve* – Valve Code: 78981T-DR-NA Front View Side View Components Shower or Bath Mixer Features • Premium metal construction Polished Chrome Code: 21398T-4-CP Brushed Nickel Code: 21398T-4-BN Brushed Brass Code: 21398T-4-2MB Matte Black Code: 21398T-4-BL Add Valve* – Valve Code: 78981T-DR-NA Front View Side View Components Shower and Bath Mixer with Diverter (Pin Lever) Mixer – Polished Chrome Front View Side View Code: 21397T-4A-CP Add Valve* – Polished Chrome Code: 78980T-DR-CP Mixer – Brushed Nickel Code: 21397T-4A-BN Add Valve* – Brushed Nickel Code: 78980T-DR-BN Mixer – Matte Black Code: 21397T-4A-BL Add Valve* – Matte Black Code: 78980T-DR-BL Front View Side View Components Shower and Bath Mixer with Diverter Features • Premium metal construction Mixer – Polished Chrome Code: 21397T-4-CP Add Valve* – Polished Chrome Code: 78980T-DR-CP Mixer – Brushed Nickel Code: 21397T-4-BN Add Valve* – Brushed Nickel Code: 78980T-ZZ-BN Mixer – Matte Black Code: 21397T-4-BL Add Valve* – Matte Black Code: 78980T-DR-BL Pictured: Components Tall Basin Mixer *Note: Valve must be purchased in addition to mixer. *Note: Valve must be purchased in addition to mixer. *Note: Valve must be purchased in addition to mixer. *Note: Valve must be purchased in addition to mixer.

kohler.co.nz 075 Ø100 KOHLER 32~52 3.5 14 oyl S/B mixer Ø100 KOHLER 32~52 3.5 14 oyl S/B mixer Moderne Brushed Brass Front View Side View Components Shower or Bath Mixer (Oyl) Features • Premium metal construction Polished Chrome Code: 21398T-8-CP Brushed Nickel Code: 21398T-8-BN Brushed Brass Code: 21398T-8-2MB Matte Black Code: 21398T-8-BL Add Valve* – Valve Code: 78981T-DR-NA *Note: Valve must be purchased in addition to mixer.

KOHLER Tapware & Accessories tapware & accessories 076 Front View Front View Side View Side View Front View Side View Front View Side View KOHLER Ø160 32~52 3.5 14 90 65 65 industrial S/B mixer (diverter) KOHLER Ø160 32~52 3.5 14 90 65 65 industrial S/B mixer (diverter) Ø100 32~52 3.5 14 KOHLER 90 65 industrial S/B mixer Ø100 32~52 3.5 14 KOHLER 90 65 industrial S/B mixer KOHLER Ø160 32~52 3.5 14 65 oyl S/B mixer (diverter) KOHLER Ø160 32~52 3.5 14 65 oyl S/B mixer (diverter) *Please purchase the appropriate bathtub according to948±10 630 Max. 70 Min* Ø160 10º 244* Bathtub Ø48 Ø29 Ø120 13218 47 G1/2˝B *Please purchase the appropriate bathtub according to the dimension. 240 250 Ø28 G1/2˝B 948±10 630 Max. 70 Min* Ø160 10º 244* Bathtub Ø48 Ø29 650±10844±101093±10 95Ø70 Ø120 Ø26 135 218 47 G1/2˝B G1/2˝ G1/2˝ 1500 *Please purchase the appropriate bathtub according to the dimension. 240 250 Ø28 G1/2˝B 948±10 630 Max. 70 Min* Ø160 10º 244* Bathtub Ø48 Ø29 650±10844±101093±10 95Ø70 Ø120 Ø26 135 218 47 G1/2˝B G1/2˝ G1/2˝ 1500 Components Shower and Bath Mixer with Diverter (Industrial) Brushed Nickel Features • Premium metal construction Mixer – Polished Chrome Code: 21397T-9-CP Add Valve* – Polished Chrome Code: 78980T-DR-CP Mixer – Brushed Nickel Code: 21397T-9-BN Add Valve* – Brushed Nickel Code: 78980T-DR-BN Mixer – Matte Black Code: 21397T-9-BL Add Valve* – Matte Black Code: 78980T-DR-BL Components Shower or Bath Mixer (Industrial) Components Floor Mount Bath Filler with Hand Shower Features • Premium metal construction Polished Chrome Code: 21398T-9-CP Brushed Nickel Code: 21398T-9-BN Brushed Brass Code: 21398T-9-2MB Matte Black Code: 21398T-9-BL Add Valve* – Valve Code: 78981T-DR-NA Features • Premium metal construction • Industrial handle • WELS Rating: 3 Star, 8 litres/min Polished Chrome Code: 25821A-CP Brushed Nickel Code: 25821A-BN Brushed Brass Code: 25821A-2MB Matte Black Code: 25821A-BL Polished Chrome Components Shower and Bath Mixer with Diverter (Oyl) Features • Premium metal construction Mixer – Polished Chrome Code: 21397T-8-CP Add Valve* – Polished Chrome Code: 78980T-DR-CP Mixer – Brushed Nickel Code: 21397T-8-BN Add Valve* – Brushed Nickel Code: 78980T-DR-BN Mixer – Matte Black Code: 21397T-8-BL Add Valve* – Matte Black Code: 78980T-DR-BL Pictured: Components Hob Mount Tube Basin Spout and Hob Mount Industrial Handles in Brushed Brass PVD Finish *Note: Valve must be purchased in addition to mixer. *Note: Valve must be purchased in addition to mixer. *Note: Valve must be purchased in addition to mixer. Matte Black

kohler.com.au 077

KOHLER Tapware & Accessories tapware & accessories 078 avid TAPW® Single Lever Basin Mixer - Super Tall Included Components • Braided stainless steel hoses Features • Polished Chrome or PVD Titaniu• Metal construction • Ceramic disc cartridge • Suitable for mains pressure • KOHLER finishes resist tarnishin and corrosion Finish Options (Colour swatches indicaTechnical Details Product • Avid® single lever basin mixer - super tall Related Products • Avid accessories • Avid tapware Installation Notes: • Optimum working pressure 300-500 kPa. • Maximum hydrostatic pressure 800 kPa (This pressure may be exceeded only under test conditions• Maximum temperature 80°C. • Maximum bench thickness is 45mm. • Where normal working pressure exceeds the maximum, pressure limiting valves should be installedG½” is equal to BSSide View 97348T-4ND-TT - PVD97348T-4ND-CP - Polis NOTE: Polished Chrome version shown 9138 897347T-4ND 452 204 253 Ø32~Ø38 45 Max. Ø51 173 148 3.5° G1/2˝ 97348T-4ND 393 263 312 Ø32~Ø38 45 Max. Ø51 173 148 3.5° G1/2˝ 2º 1483°252 Australia www.kohler.com.au New Zealand www.kohler.co.nz Sizes are approximate. All measurements shown are in millimetres. May 2016 1288480-AIncluded Components • Braided stainless steel hoFeatures • Polished Chrome or PVD• Metal construction • Ceramic disc cartridge • Suitable for mains pressu• KOHLER finishes resist ta and corrosion Finish Options (Colour swatcTechnical Details Product • Avid® single lever basin mixer Related Products • Avid accessories • Avid tapware Installation Notes: • Optimum working pressure 300-500 kPa. • Maximum hydrostatic pressure 800 kPa (This pressure may be exceeded only under test con• Maximum temperature 80°C. • Maximum bench thickness is 45mm. • Where normal working pressure exceeds the maximum, pressure limiting valves should be in• Inline filters should be used to protect tapware from debris that may be present within the pluG½” is equSide View 97345T-4ND-TT97345T-4ND-CPNOTE: Polished Chrome version shown 97345T-4ND 567 89 138 Ø32~Ø38 45 Max. Ø51 173 148 3.5° G1/2˝ 97352T-4ND Ø32~Ø38 40Max. Ø53 76 39 203 Ø23~ Ø37 Ø53 97358T-4ND Ø58 100 46~56 5° 209 Rc 155 102 125 1/2˝ 70 Rc1/2˝ Hot Cold G 1/2’’ female G 1/2’’ female Australia www.kohler.com.au New Zealand www.kohler.co.nz Sizes are approximate. All measurements shown are in millimetres. May 2016 1288481-A0Avid TA® Single Lever Basin Mixer - Tall Included Components • Braided stainless steel hosFeatures • Polished Chrome or PVD T• Metal construction • Ceramic disc cartridge • Suitable for mains pressure• KOHLER finishes resist tar and corrosion Finish Options (Colour swatcheTechnical Details Product • Avid® single lever basin mixer - tall Related Products • Avid accessories • Avid tapware Installation Notes: • Optimum working pressure 300-500 kPa. • Maximum hydrostatic pressure 800 kPa (This pressure may be exceeded only under test cond• Maximum temperature 80°C. • Maximum bench thickness is 45mm. • Where normal working pressure exceeds the maximum, pressure limiting valves should be inst• Inline filters should be used to protect tapware from debris that may be present within the plumG½” is equaSide View 97347T-4ND-TT -97347T-4ND-CP NOTE: Polished Chrome version shown 97345T-4ND 567 89 138 Ø32~Ø38 45 Max. Ø51 173 148 3.5° G1/2˝ 97347T-4ND 452 204 253 Ø32~Ø38 45 Max. Ø51 173 148 3.5° G1/2˝ 97352T-4ND 2º 148 108 127 Ø32~Ø38 40Max. Ø53 76 39 203 Ø23~ Ø37 Ø53 Ø58 100 4° 155 70Ø65 Ø65 104 87 50 MAX 35 Ø22~ Ø35 203 Ø180 G 1/2’’ female G 1/2’’ female G 1/2’’ female Avid Basin Mixer Avid Tall Basin Mixer Avid Super Tall Basin Mixer Features • Ceramic disc cartridge • Adjustable directional aerator • WELS Rating: 5 Star, 6 litres/min Polished Chrome Code: 97345T-4ND-CP Titanium Code: 97345T-4ND-TT Features • Ceramic disc cartridge • Adjustable directional aerator • WELS Rating: 5 Star, 6 litres/min Polished Chrome Code: 97347T-4ND-CP Titanium Code: 97347T-4ND-TT Features • Ceramic disc cartridge • Adjustable directional aerator • WELS Rating: 5 Star, 6 litres/min Polished Chrome Code: 97348T-4ND-CP Titanium Code: 97348T-4ND-TT Side View Side View Side View Avid Avid delivers sensuous simplicity to the everyday bathroom and transforms it into a purposeful exercise in purity of form. No harsh edges or unnecessary embellishment. Available in Polished Chrome and Titanium PVD finish. Polished Chrome Polished Chrome Titanium Polished Chrome (CP) Titanium (TT)

kohler.co.nz 079 Australia www.kohler.com.au New Zealand www.kohler.co.nz Sizes are approximate. All measurements shown are in millimetres. May 2016 1288485-A04-A avid TAPWARE / BATH a - b® bath Set with Lever handles Included Components • Concealed breech piece Features • Polished Chrome of PVD Titanium finish • Metal construction • 1/4 turn ceramic disc cartridges • Suitable for mains pressure • KOHLER finishes resist tarnishing and corrosion Finish Options (Colour swatches indicative only) Technical Details Product • Avid® bath set with lever handles Related Products • Avid accessories • Avid tapware Kohler Code 97363T-4E* Side View Installation Notes: • G1/2” female inlets. • Optimum working pressure 300-500 kPa. • Maximum hydrostatic pressure 800 kPa (This pressure may be exceeded only under test conditions). • Maximum temperature 80°C. • Maximum bench thickness is 35mm. • Where normal working pressure exceeds the maximum, pressure limiting valves should be installed. • Inline filters should be used to protect tapware from debris that may be present within the plumbing. G½” is equal to BSP½” Front View 97363T-4E-TT - PVD Titanium 97363T-4E-CP - Polished Chrome NOTE: Polished Chrome version shown 97345T-4ND 567 89 138 Ø32~Ø38 45 Max. Ø51 173 148 3.5° G1/2˝ 97347T-4ND 452 204 253 Ø32~Ø38 45 Max. Ø51 173 148 3.5° G1/2˝ 97348T-4ND 393 263 312 Ø32~Ø38 45 Max. Ø51 173 148 3.5° G1/2˝ 97352T-4ND 2º 148 108 127 Ø32~Ø38 40Max. Ø53 76 39 203 Ø23~ Ø37 Ø53 97358T-4ND Ø58 100 46~56 5° 209 4° c155 102 125 1/2˝ 70 Rc1/2˝ Ø65 Ø65 Ø65 104 87 50 MAX 35 3° 198 159 183 252 Ø22~ Ø33~Ø38 Ø35 203 97487T-4 Ø180 65 85 97488T-4 Ø180 85 14 34~50 ot Cold Ø180 Ø180 34~50 G 1/2’’ female G 1/2’’ female G 1/2’’ female G 1/2’’ female Australia www.kohler.com.au New Zealand www.kohler.co.nz Sizes are approximate. All measurements shown are in millimetres. May 2016 1288485-A04-A avid TAPWARE / BATH a - bth ® bath Set with Lever handles Included Components • Concealed breech piece Features • Polished Chrome of PVD Titanium finish • Metal construction • 1/4 turn ceramic disc cartridges • Suitable for mains pressure • KOHLER finishes resist tarnishing and corrosion Finish Options (Colour swatches indicative only) Technical Details Product • Avid® bath set with lever handles Related Products • Avid accessories • Avid tapware Kohler Code 97363T-4E* Side View Installation Notes: • G1/2” female inlets. • Optimum working pressure 300-500 kPa. • Maximum hydrostatic pressure 800 kPa (This pressure may be exceeded only under test conditions). • Maximum temperature 80°C. • Maximum bench thickness is 35mm. • Where normal working pressure exceeds the maximum, pressure limiting valves should be installed. • Inline filters should be used to protect tapware from debris that may be present within the plumbing. G½” is equal to BSP½” Front View 97363T-4E-TT - PVD Titanium 97363T-4E-CP - Polished Chrome NOTE: Polished Chrome version shown 97345T-4ND 567 89 138 Ø32~Ø38 45 Max. Ø51 173 148 3.5° G1/2˝ 97347T-4ND 452 204 253 Ø32~Ø38 45 Max. Ø51 173 148 3.5° G1/2˝ 97348T-4ND 393 263 312 Ø32~Ø38 45 Max. Ø51 173 148 3.5° G1/2˝ 97352T-4ND 2º 148 108 127 Ø32~Ø38 40Max. Ø53 76 39 203 Ø23~ Ø37 Ø53 97358T-4ND Ø58 100 46~56 5° 209 4° 155 102 125 70 Rc1/2˝ Ø65 Ø65 Ø65 104 87 50 MAX 35 3° 198 159 183 252 Ø22~ Ø33~Ø38 Ø35 203 97487T-4 Ø180 65 85 97488T-4 Ø180 85 14 34~50 Cold Ø180 Ø180 34~50 G 1/2’’ female G 1/2’’ female G 1/2’’ female G 1/2’’ female Australia www.kohler.com.au New Zealand www.kohler.co.nz Sizes are approximate. All measurements shown are in millimetres. May 2016 1288483-A04-A Avid TAPWARE / BASIN A ® Dual Control Basin Set with Lever Handles Included Components • Concealed breech piece Features • Polished Chrome or PVD Titanium finish • Metal construction • 1/4 turn ceramic disc cartridges • Suitable for mains pressure • KOHLER finishes resist tarnishing and corrosion Finish Options (Colour swatches indicative only) Technical Details Product • Avid® dual control basin set with lever handles Related Products • Avid accessories • Avid tapware Kohler Cod97352T-4NDSide View The more stars the more 0164 WELS RATING (5 Star 6.0 Litres /Installation Notes: • G1/2” female inlets. • Optimum working pressure 300-500 kPa. • Maximum hydrostatic pressure 800 kPa (This pressure may be exceeded only under test conditions). • Maximum temperature 80°C. • Maximum bench thickness is 40mm. • Where normal working pressure exceeds the maximum, pressure limiting valves should be installed. • Inline filters should be used to protect tapware from debris that may be present within the plumbing. G½” is equal to BSP½” Front View 97352T-4ND-TT - PVD Titanium 97352T-4ND-CP - Polished Chrome NOTE: Polished Chrome version shown 97345T-4ND 567 89 138 Ø32~Ø38 45 Max. Ø51 173 148 3.5° G1/2˝ 97352T-4ND 2º 148 108 127 Ø32~Ø38 40Max. Ø53 76 39 203 Ø23~ Ø37 Ø53 97358T-4ND Ø58 100 46~56 5° 209 4° Rc 155 102 125 1/2˝ 70 Rc1/2˝ Hot Cold G 1/2’’ female G 1/2’’ female Australia www.kohler.com.au New Zealand www.kohler.co.nz Sizes are approximate. All measurements shown are in millimetres. May 2016 1288483-A04-A Avid TAPWARE / BASIN A - BSN ® Dual Control Basin Set with Lever Handles Included Components • Concealed breech piece Features • Polished Chrome or PVD Titanium finish • Metal construction • 1/4 turn ceramic disc cartridges • Suitable for mains pressure • KOHLER finishes resist tarnishing and corrosion Finish Options (Colour swatches indicative only) Technical Details Product • Avid® dual control basin set with lever handles Related Products • Avid accessories • Avid tapware Kohler Code 97352T-4ND* Side View The more stars the more 0164 WELS RATING (5 Star 6.0 Litres / min) Installation Notes: • G1/2” female inlets. • Optimum working pressure 300-500 kPa. • Maximum hydrostatic pressure 800 kPa (This pressure may be exceeded only under test conditions). • Maximum temperature 80°C. • Maximum bench thickness is 40mm. • Where normal working pressure exceeds the maximum, pressure limiting valves should be installed. • Inline filters should be used to protect tapware from debris that may be present within the plumbing. G½” is equal to BSP½” Front View 97352T-4ND-TT - PVD Titanium 97352T-4ND-CP - Polished Chrome NOTE: Polished Chrome version shown 97345T-4ND 567 89 138 Ø32~Ø38 45 Max. Ø51 173 148 3.5° G1/2˝ 973452 45 Max. 97352T-4ND 2º 148 108 127 Ø32~Ø38 40Max. Ø53 76 39 203 Ø23~ Ø37 Ø53 97358T-4ND Ø58 100 46~56 5° 209 4° Rc 155 102 125 1/2˝ 70 Rc1/2˝ Hot Cold G 1/2’’ female G 1/2’’ female Australia www.kohler.com.au New Zealand www.kohler.co.nz Sizes are approximate. All measurements shown are in millimetres. May 2016 1288484-A04-A Technical Details Related Products • Avid accessories • Avid tapware Side View Installation Notes: • Rc 1/2’’ female inlets. • Optimum working pressure 300-500 kPa. • Maximum hydrostatic pressure 800 kPa (This pressure may be exceeded only under test conditions). • Maximum temperature 80°C. • Where normal working pressure exceeds the maximum, pressure limiting valves should be installed. • Inline filters should be used to protect tapware from debris that may be present within the plumbing. Front View NOTE: Polished Chrome version shown 97352T-4ND Ø32~Ø38 40Max. 203 Ø23~ Ø37 97358T-4ND Ø58 100 46~56 5° 209 4° Rc 155 102 125 1/2˝ 70 Rc1/2˝ Hot Cold G 1/2’’ female G 1/2’’ female Australia www.kohler.com.au New Zealand www.kohler.co.nz Sizes are approximate. All measurements shown are in millimetres. May 2016 1288484-A04-A Technical Details Related Products • Avid accessories • Avid tapware Side View Installation Notes: • Rc 1/2’’ female inlets. • Optimum working pressure 300-500 kPa. • Maximum hydrostatic pressure 800 kPa (This pressure may be exceeded only under test conditions). • Maximum temperature 80°C. • Where normal working pressure exceeds the maximum, pressure limiting valves should be installed. • Inline filters should be used to protect tapware from debris that may be present within the plumbing. Front View NOTE: Polished Chrome version shown 97352T-4ND Ø32~Ø38 40Max. 203 Ø23~ Ø37 97358T-4ND Ø58 100 46~56 5° 209 4° Rc 155 102 125 1/2˝ 70 Rc1/2˝ Hot Cold G 1/2’’ female G 1/2’’ female Avid TAPWARE / SHOWER AND BATH A - S&B ® Shower and Bath Mixer - 40mm Included Components • In wall valve • Trim kit Features • Diverter version allows water to be delivered through a bath spout or shower • Polished Chrome or PVD Titanium finish • Metal construction • Ceramic disc cartridge • Suitable for mains pressure • KOHLER finishes resist tarnishing and corrosion Finish Options (Colour swatches indicative only) Technical Details Product • Avid® shower or bath mixer only - 40mm • Avid® shower and bath mixer with diverter - 40mm Related Products • Avid accessories • Avid tapware Kohler Code 97488T-4* 97487T-4* Installation Notes: • Rc 1/2’’ female inlets. • Optimum working pressure 300-500 kPa. • Maximum hydrostatic pressure 800kPa. (This pressure may be exceeded only under test conditions). • Maximum temperature 80°C. • Where normal working pressure exceeds the maximum, pressure limiting valves should be installed. • For optimum installation it is important that the valve is installed plumb on both horizontal and vertical planes. •Inlinefiltersshouldbeusedtoprotecttapwarefromdebristhatmaybepresentwithintheplumbing97488T-4-TT - PVD Titanium 97487T-4-TT - PVD Titanium 97488T-4-CP - Polished Chrome 97487T-4-CP - Polished Chrome NOTE: Polished Chrome versions shown Front View (No Diverter) Side View (No Diverter) Front View (With Diverter) Side View (With Diverter) 97347T-4ND 452 204 253 Ø32~Ø38 45 Max. Ø51 173 148 3.5° G1/2˝ 97348T-4ND 393 263 312 Ø32~Ø38 45 Max. Ø51 173 148 3.5° G1/2˝ 2º 108 127 4° 97363T-4E Ø65 Ø65 Ø65 104 87 50 MAX 35 3° 198 159 183 252 Ø22~ Ø33~Ø38 Ø35 203 97487T-4 97488T-4 Ø180 85 14 34~50 Ø180 85 14 34~50 65 G 1/2’’ female G 1/2’’ female Finished wall Finished wall Avid TAPWARE / SHOWER AND BATH A - S&B ® Shower and Bath Mixer - 40mm Included Components • In wall valve • Trim kit Features • Diverter version allows water to be delivered through a bath spout or shower • Polished Chrome or PVD Titanium finish • Metal construction • Ceramic disc cartridge • Suitable for mains pressure • KOHLER finishes resist tarnishing and corrosion Finish Options (Colour swatches indicative only) Technical Details Product • Avid® shower or bath mixer only - 40mm • Avid® shower and bath mixer with diverter - 40mm Related Products • Avid accessories • Avid tapware Kohler Code 97488T-4* 97487T-4* Installation Notes: • Rc 1/2’’ female inlets. • Optimum working pressure 300-500 kPa. • Maximum hydrostatic pressure 800kPa. (This pressure may be exceeded only under test conditions). • Maximum temperature 80°C. • Where normal working pressure exceeds the maximum, pressure limiting valves should be installed. • For optimum installation it is important that the valve is installed plumb on both horizontal and vertical planes. •Inlinefiltersshouldbeusedtoprotecttapwarefromdebristhatmaybepresentwithintheplumbing97488T-4-TT - PVD Titanium 97487T-4-TT - PVD Titanium 97488T-4-CP - Polished Chrome 97487T-4-CP - Polished Chrome NOTE: Polished Chrome versions shown Front View (No Diverter) Side View (No Diverter) Front View (With Diverter) Side View (With Diverter) 97347T-4ND 452 204 253 Ø32~Ø38 45 Max. Ø51 173 148 3.5° G1/2˝ 97348T-4ND 393 263 312 Ø32~Ø38 45 Max. Ø51 173 148 3.5° G1/2˝ 2º 148 108 127 209 4° 97363T-4E Ø65 Ø65 Ø65 104 87 50 MAX 35 3° 198 159 183 252 Ø22~ Ø33~Ø38 Ø35 203 97487T-4 97488T-4 Ø180 85 14 34~50 Ø180 85 14 34~50 65 G 1/2’’ female G 1/2’’ female Finished wall Finished wall Avid Hob Mount Bath Filler Set Avid Hob Mount Basin Set Avid Wall Mount Basin Mixer Features • ¼ turn ceramic disc cartridges • Adjustable directional aerator Polished Chrome Code: 97363T-4E-CP Titanium Code: 97363T-4E-TT Features • ¼ turn ceramic disc cartridges • Adjustable directional aerator • WELS Rating: 5 Star, 6 litres/min Polished Chrome Code: 97352T-4ND-CP Titanium Code: 97352T-4ND-TT Features • Ceramic disc cartridge • Adjustable directional aerator • WELS Rating: 5 Star, 6 litres/min Polished Chrome Code: 97358T-4ND-CP Titanium Code: 97358T-4ND-TT Front View Front View Front View Side View Side View Side View Polished Chrome Titanium Titanium Avid Bath and Shower Mixer with Diverter Features • 40mm ceramic disc cartridge • Suitable for mains pressure Includes • Trim kit • In-wall valve with diverter Polished Chrome Code: 77919A-CP Titanium Code: 77919A-TT Front View Side View Titanium

KOHLER Tapware & Accessories tapware & accessories 080 Australia www.kohler.com au. New Zealand www.kohler.co.nz Sizes are approximate. All measurements shown are in millimetres. Nov 2016 1304265-A0Avid ACC® Range - Technical Drawings Installation Notes: • In an effort to make installation quick and easy, Kohler accessories are shipped with a hexpre-assembled parts. • While it is possible to mount them to any surface, a stud mounted product will yield the beIncluded Components Features • Installation hardware • Polished chrome (-cp) or titanium (-TT) • Metal construction 45 70 68 45 45 48 130 45 45 148 132 82 142 45 260 68 45 121 68 48 24 642 71 610 610 45 655 70 45 457 132 45 502 70 • Robe hook Kohler: 97499T • Toilet tissue holder with cover Kohler: 97503T • Towel bar - 610mm Kohler: 97495T • Towel bar - 457mm Kohler: 97494T • Double robe hook Kohler: 97500T • Vertical toilet tissue holder Kohler: 97502T Avid ACCESSORIES / AVID ACC - A ® Range - Technical Drawings Included Components Features • Installation hardware • Polished chrome (-cp) or titanium (-TT) • Metal construction • Durability • No visible fixings 45 252 26 70 68 45 45 48 130 45 45 148 132 82 142 610 45 655 260 68 45 121 68 48 24 642 71 610 610 45 655 70 610 45 655 457 132 45 502 70 • Robe hook Kohler: 97499T • Toilet tissue holder with cover Kohler: 97503T • Hotelier Kohler: 97497T • Towel bar - 610mm Kohler: 97495T • Towel bar - 457mm Kohler: 97494T • Towel ring Kohler: 97498T • Double robe hook Kohler: 97500T • Vertical toilet tissue holder Kohler: 97502T • Double towel bar - 610mm Kohler: 97496T Australia www.kohler.com au. New Zealand www.kohler.co.nz Sizes are approximate. All measurements shown are in millimetres. Nov 2016 1304265-A04-B Avid ACCESSOR® Range - Technical Drawings Installation Notes: • In an effort to make installation quick and easy, Kohler accessories are shipped with a hex key wrepre-assembled parts. • While it is possible to mount them to any surface, a stud mounted product will yield the best resultIncluded Components Features • Installation hardware • Polished chrome (-cp) or titanium (-TT) • Metal construction • Durab45 270 68 45 45 48 130 45 45 148 132 82 142 45 655 260 68 45 121 68 48 24 642 71 610 610 45 655 70 45 457 132 45 502 70 • Robe hook Kohler: 97499T • Toilet tissue holder with cover Kohler: 97503T • Hote Kohl• Towel bar - 610mm Kohler: 97495T • Towel bar - 457mm Kohler: 97494T • Towe Kohle• Double robe hook Kohler: 97500T • Vertical toilet tissue holder Kohler: 97502T • Doub Kohl* Please purchase the appropriate bathtub according to the dimension. Handshower Hose G1/2˝ G1/2˝ 678~698 915~935 G1/2˝ 3º *226 50 255 *70 Min. 780~810 860~880 630 Max. Ø120 Bathtub G1/2″ 24 28 220 9 97367T-4E 1500 Australia www.kohler.com.au New Zealand www.kohler.co.nz Sizes are approximate. All measurements shown are in millimetres. May128Technical Details • Avid tapware Installation Notes: • Rc 1/2’’ female inlets. • Optimum working pressure 300-500 kPa. • Maximum hydrostatic pressure 800kPa. (This pressure may be exceeded only under te• Maximum temperature 80°C. • Where normal working pressure exceeds the maximum, pressure limiting valves should• For optimum installation it is important that the valve is installed plumb on both horizont• Inline filters should be used to protect tapware from debris that may be present within t Front View (No Diverter) Side View (No Diverter) Front View (With Div52T-4ND 203 97358T-4ND Ø58 100 46~56 5° 209 4° 70 Rc1/2˝ 203 97487T-4 Ø180 65 85 14 34~50 Ø180 85 14 34~50 Cold 97487T-4 BACKUP Ø180 G 1/2’’ female G 1/2’’ female G 1/2’’ female Finished wall Australia www.kohler.com.au New Zealand www.kohler.co.nz Sizes are approximate. All measurements shown are in millimetTechnical Details • Avid tapware Installation Notes: • Rc 1/2’’ female inlets. • Optimum working pressure 300-500 kPa. • Maximum hydrostatic pressure 800kPa. (This pressure may be exceeded on• Maximum temperature 80°C. • Where normal working pressure exceeds the maximum, pressure limiting va• For optimum installation it is important that the valve is installed plumb on bo• Inline filters should be used to protect tapware from debris that may be pres Front View (No Diverter) Side View (No Diverter) Front V97352T-4ND 203 97358T-4ND Ø58 100 46~56 5° 209 4° 155 02 125 70 Rc1/2˝ 203 97487T-4 Ø180 65 85 14 34~50 Ø180 85 14 34~50 Cold 97487T-4 BACKUP G 1/2’’ female G 1/2’’ female G 1/2’’ female Finished wall Avid Floor Standing Bath Filler Avid Towel Bars Avid Double Towel Bar Features • Integrated multifunction hand shower with diverter • Adjustable directional aerator • Suitable for mains pressure • WELS Rating: 3 Star, 9 litres/min Polished Chrome Code: 21359A-CP Titanium Code: 21359A-TT 457mm Polished Chrome Code: 97494T-CP 457mm Titanium Code: 97494T-TT 610mm Polished Chrome Code: 97495T-CP 610mm Titanium Code: 97495T-TT Polished Chrome Code: 97496T-CP Titanium Code: 97496T-TT Isometric View Isometric View Isometric View 610mm Titanium 457mm Polished Chrome Polished Chrome Polished Chrome Side View Avid Bath or Shower Mixer Features • 40mm ceramic disc cartridge • Suitable for mains pressure Includes • Trim kit • In-wall valve Polished Chrome Code: 77921A-CP Titanium Code: 77921A-TT Front View Side View Polished Chrome

kohler.co.nz 081 Australia www.kohler.com au. New Zealand www.kohler.co.nz Sizes are approximate. All measurements shown are in millimetres. Nov 2016 1304265-A04-B Avid ACCESSORIES / AVID ACC - A ® Range - Technical Drawings Installation Notes: • In an effort to make installation quick and easy, Kohler accessories are shipped with a hex key wrench, anchors and pre-assembled parts. • While it is possible to mount them to any surface, a stud mounted product will yield the best results. Included Components Features • Installation hardware • Polished chrome (-cp) or titanium (-TT) • Metal construction • Durability • No visible fixings 45 252 26 70 68 45 45 48 130 45 45 148 132 82 142 610 45 655 260 68 45 121 68 48 24 642 71 610 610 45 655 70 610 45 655 457 132 45 502 70 • Robe hook Kohler: 97499T • Toilet tissue holder with cover Kohler: 97503T • Hotelier Kohler: 97497T • Towel bar - 610mm Kohler: 97495T • Towel bar - 457mm Kohler: 97494T • Towel ring Kohler: 97498T • Double robe hook Kohler: 97500T • Vertical toilet tissue holder Kohler: 97502T • Double towel bar - 610mm Kohler: 97496T Avid A® Range - Technical Drawings Included Components Features • Installation hardware • Polished chrome (-cp) or titanium (-TT) • Metal construc68 45 45 48 130 45 45 148 132 82 142 45 260 68 45 121 68 48 24 642 71 610 610 45 655 70 45 457 45 502 70 • Robe hook Kohler: 97499T • Toilet tissue holder with cover Kohler: 97503T • Towel bar - 610mm Kohler: 97495T • Towel bar - 457mm Kohler: 97494T • Double robe hook Kohler: 97500T • Vertical toilet tissue holder Kohler: 97502T Avid A® Range - Technical Drawings Included Components Features • Installation hardware • Polished chrome (-cp) or titanium (-TT) • Metal construct468 45 45 48 130 45 45 148 132 82 142 45 260 68 45 121 68 48 642 71 610 610 45 655 70 45 457 1345 502 70 • Robe hook Kohler: 97499T • Toilet tissue holder with cover Kohler: 97503T • Towel bar - 610mm Kohler: 97495T • Towel bar - 457mm Kohler: 97494T • Double robe hook Kohler: 97500T • Vertical toilet tissue holder Kohler: 97502T Avid ACCES® Range - Technical Drawings Included Components Features • Installation hardware • Polished chrome (-cp) or titanium (-TT) • Metal construction • D45 70 68 45 45 48 130 45 45 148 132 82 142 45 260 68 45 121 68 48 24 642 71 610 610 45 655 70 45 457 132 45 502 70 • Robe hook Kohler: 97499T • Toilet tissue holder with cover Kohler: 97503T • Towel bar - 610mm Kohler: 97495T • Towel bar - 457mm Kohler: 97494T • Double robe hook Kohler: 97500T • Vertical toilet tissue holder Kohler: 97502T Avid ® Range - Technical Drawings Included Components Features • Installation hardware • Polished chrome (-cp) or titanium (-TT) • Metal c68 45 45 48 130 45 45 148 132 82 142 68 45 121 68 48 24 642 7610 610 45 655 70 457 45 502 70 • Robe hook Kohler: 97499T • Toilet tissue holder with cover Kohler: 97503T • Towel bar - 610mm Kohler: 97495T • Towel bar - 457mm Kohler: 97494T • Double robe hook Kohler: 97500T • Vertical toilet tissue holder Kohler: 97502T Australia www.kohler.com au. New Zealand www.kohler.co.nz Sizes are approximate. All measurements shown are in millimetres. Nov 2016 1304265-A04-B Installation Notes: • In an effort to make installation quick and easy, Kohler accessories are shipped with a hex key wrench, anchors and pre-assembled parts. • While it is possible to mount them to any surface, a stud mounted product will yield the best results. 70 48 130 45 45 148 132 82 142 610 45 655 260 68 45 48 24 642 71 610 610 45 655 70 610 45 655 457 132 45 502 70 • Toilet tissue holder with cover Kohler: 97503T • Hotelier Kohler: 97497T • Towel bar - 610mm Kohler: 97495T • Towel bar - 457mm Kohler: 97494T • Vertical toilet tissue holder Kohler: 97502T • Double towel bar - 610mm Kohler: 97496T Isometric View Isometric View Isometric View Isometric View Avid Toilet Tissue Holders Avid Robe Hooks Avid Towel Ring Single Robe Hook, Polished Chrome Code: 97499T-CP Single Robe Hook, Titanium Code: 97499T-TT Double Robe Hook, Polished Chrome Code: 97500T-CP Double Robe Hook, Titanium Code: 97500T-TT Vertical Holder, Titanium Single, Titanium Polished Chrome Covered Holder, Polished Chrome Double, Polished Chrome Polished Chrome Code: 97498T-CP Titanium Code: 97498T-TT Vertical Toilet Tissue Holder, Polished Chrome Code: 97502T-CP Vertical Toilet Tissue Holder, Titanium Code: 97502T-TT Toilet Tissue Holder With Cover, Polished Chrome Code: 97503T-CP Toilet Tissue Holder With Cover, Titanium Code: 97503T-TT Isometric View Avid Hotelier Polished Chrome Code: 97497T-CP Titanium Code: 97497T-TT Isometric View Titanium

Front View Side View 35o 66 140 177 35 50 (MAX) 360 Bench 198 G1/2" 35o 165 159 196 35 40 (MAX) 350 Bench 308 G1/2" Side View Side View Side View Purist Purist tapware and accessories combine simple architectural forms with sensual design lines and careful detailing. Now available in four finishes: Rose Gold, Brushed Nickel, Brushed Bronze and Polished Chrome. Purist Hob Mount Basin Set and Lever Handles Purist Basin Mixer Purist Tall Basin Mixer Rose Gold Rose Gold Polished Chrome Features • ¼ turn ceramic disc cartridges • Suitable for mains pressure • WELS Rating: 5 Star, 6 litres/min Polished Chrome Code: 14406A-B4-CP Rose Gold Code: 14406A-B4-RGD Brushed Nickel Code: 14406A-B4-BN Brushed Bronze Code: 14406A-B4-BV Features • Ceramic disc cartridge • Suitable for mains pressure • WELS Rating: 5 Star, 6 litres/min Polished Chrome Code: 14402A-4AND-CP Rose Gold Code: 14402A-4AND-RGD Brushed Nickel Code: 14402A-4AND-BN Brushed Bronze Code: 14402A-4AND-BV Features • Ceramic disc cartridge • Suitable for mains pressure • WELS Rating: 5 Star, 6 litres/min Polished Chrome Code: 14404A-4AND-CP Rose Gold Code: 14404A-4AND-RGD Brushed Nickel Code: 14404A-4AND-BN Brushed Bronze Code: 14404A-4AND-BV Polished Chrome (CP) Brushed Bronze (BV) Rose Gold (RGD) Brushed Nickel (BN) KOHLER Tapware & Accessories tapware & accessories 082 Pictured: Purist Hob Mount Basin Set and Lever Handles

kohler.co.nz 083 Front View Side View Front View Side View Front View Side View Front View Side View Front View Side View Front View Side View Features • ¼ turn ceramic disc cartridges • Suitable for mains pressure • WELS Rating: 5 Star, 6 litres/min Polished Chrome Code: 14410A-B4-CP Rose Gold Code: 14410A-B4-RGD Brushed Nickel Code: 14410A-B4-BN Brushed Bronze Code: 14410A-B4-BV Features • ¼ turn ceramic disc cartridges • Suitable for mains pressure • WELS Rating: 5 Star, 6 litres/min Polished Chrome Code: 14415A-B4-CP Rose Gold Code: 14415A-B4-RGD Brushed Nickel Code: 14415A-B4-BN Brushed Bronze Code: 14415A-B4-BV Purist Basin Set with Low Spout and Lever Handles Purist Wall Mount Basin Set with Lever handles Rose Gold Polished Chrome Front View Front View Side View Side View

KOHLER Tapware & Accessories tapware & accessories 084 Australia www.kohler.com.au New Zealand www.kohler.co.nz Sizes are approximate. All measurements shown are in millimetres. TAPWPurist ® Shower and Bath Mixer - 40mm Included Com• In wall valve • Trim kit Features • Diverter versio a bath spout • Polished Chro• Metal constru• Ceramic disc • Suitable for m• KOHLER finisFinish OptionsTechnical Details Product • Purist® shower or bath mixer only - 40mm • Purist® shower and bath mixer with diverter - 40mm Related Products • Purist accessories • Purist tapware Installation Notes: • Rc 1/2’’ female inlets. • Optimum working pressure 300-500 kPa. • Maximum hydrostatic pressure 800kPa. (This pressure may be exceeded only un• Maximum temperature 80°C. • Where normal working pressure exceeds the maximum, pressure limiting valves s• For optimum installation it is important that the valve is installed plumb on both ho• Inline filters should be used to protect tapware from debris that may be present w7792779277927792779277927792779277927792 NOTE: Polished Chrome versions shown Front View (No Diverter) Side View (No Diverter) Front View (WAll information is based on the latest product information available at threserves the right to make changes in product characteristics, packagiPlease leave these instructions for the consumer. They contain im1. Flush the water supply pipes thoroughly to remove any debris. 2. An in line water filter must be used with this product. 3. Inspect the supply pipes for damage. Replace as necessary. 4. Observe local plumbing codes. 5. If possible, install this basin set before installing the basin. 6. Recommended working pressure: 100KPa to 500KPa. 7. Maximum working pressure: 800KPa. 8. All installations should comply with the relevant requirements of AS/1155383-AN2-A 18/03/16 Shower/BBEFORE YOU BEGIN INSTALLATION INSTRUCTIONS ROUGH-IN DIMENSIONS 15578A 1 Φ177 Φ17738~50 6567101 45 45 Hot Cold OClRc 1/2” inlet & outlet ports 77926A* 77927A* TAPWARE / SHOWER AND BATH Purist P - S&B ® Shower and Bath Mixer - 40mm Included Components • In wall valve • Trim kit Features • Diverter version allows water to be delivered through a bath spout or shower • Polished Chrome or Vibrant Rose Gold finish • Metal construction • Ceramic disc cartridge • Suitable for mains pressure • KOHLER finishes resist tarnishing and corrosion Finish Options (Colour swatches indicative only) Technical Details Product • Purist® shower or bath mixer only - 40mm • Purist® shower and bath mixer with diverter - 40mm Related Products • Purist accessories • Purist tapware Kohler Code 77927A* 77926A* Installation Notes: • Rc 1/2’’ female inlets. • Optimum working pressure 300-500 kPa. 77926A-BV - Vibrant Brushed Bronze 77927A-BV - Vibrant Brushed Bronze 77926A-BN - Vibrant Brushed Nickel 77927A-BN - Vibrant Brushed Nickel 77926A-PGD - Vibrant Moderne Polished Gold 77927A-PGD - Vibrant Moderne Polished Gold 77926A-RGD - Vibrant Rose Gold 77927A-RGD - Vibrant Rose Gold 77926A-CP - Polished Chrome 77927A-CP - Polished Chrome NOTE: Polished Chrome versions shown Front View (No Diverter) Side View (No Diverter) Front View (With Diverter) Side View (With Diverter) All information is based on the latest product information available at the time of publication. Kohler Co. reserves the right to make changes in product characteristics, packaging, or availability at any time without Please leave these instructions for the consumer. They contain important information. 1. Flush the water supply pipes thoroughly to remove any debris. 2. An in line water filter must be used with this product. 3. Inspect the supply pipes for damage. Replace as necessary. 4. Observe local plumbing codes. 5. If possible, install this basin set before installing the basin. 6. Recommended working pressure: 100KPa to 500KPa. 7. Maximum working pressure: 800KPa. 8. All installations should comply with the relevant requirements of AS/NZS 3500. Shower/Bath Mixer: 15578A Shower/Bath Mixer with diverter: 15577A BEFORE YOU BEGIN INSTALLATION INSTRUCTIONS ROUGH-IN DIMENSIONS 15578A 15577A Shower / bath Mixers - 40mm PURIST SHOWER / BATH TAPWARE Φ177 Φ177 38~50 6567101 38~50 6567101 OpenRc 1/2” inlet & outlet ports Rc 1/2” inlet & outlet ports 77926A* 77927A* Australia www.kohler.com.au New Zealand www.kohler.co.nz Sizes are approximate. All measurements shown are in Purist ® Shower and Bath Mixer - 40mm Inclu• In w• TrimFeat• Div a b• Po• Me• Ce• Su• KOFinisTechnical Details Product • Purist® shower or bath mixer only - 40mm • Purist® shower and bath mixer with diverter - 40mm Related Products • Purist accessories • Purist tapware Installation Notes: • Rc 1/2’’ female inlets. • Optimum working pressure 300-500 kPa. • Maximum hydrostatic pressure 800kPa. (This pressure may be exceed• Maximum temperature 80°C. • Where normal working pressure exceeds the maximum, pressure limit• For optimum installation it is important that the valve is installed plumb• Inline filters should be used to protect tapware from debris that may be NOTE: Polished Chrome versions shown Front View (No Diverter) Side View (No Diverter) All information is based on the latest product information avareserves the right to make changes in product characteristicsPlease leave these instructions for the consumer. They c1. Flush the water supply pipes thoroughly to remove any deb2. An in line water filter must be used with this product. 3. Inspect the supply pipes for damage. Replace as necessar4. Observe local plumbing codes. 5. If possible, install this basin set before installing the basin. 6. Recommended working pressure: 100KPa to 500KPa. 7. Maximum working pressure: 800KPa. 8. All installations should comply with the relevant requiremen1155383-AN2-A 18/03/16 SBEFORE YOU BEGIN INSTALLATION INSTRUCTIONS ROUGH-IN DIMENSIONS 15578A 1 Φ177 38~50 6567101 45 45 Hot Rc 1/2” inlet & outlet ports 77926A* 77927A* Australia www.kohler.com.au New Zealand www.kohler.co.nz Sizes are approximate. All measurements shown are in Purist ® Shower and Bath Mixer - 40mm Inc• In• TrFea• D a • P• M• C• S• KFinTechnical Details Product • Purist® shower or bath mixer only - 40mm • Purist® shower and bath mixer with diverter - 40mm Related Products • Purist accessories • Purist tapware Installation Notes: • Rc 1/2’’ female inlets. • Optimum working pressure 300-500 kPa. • Maximum hydrostatic pressure 800kPa. (This pressure may be excee• Maximum temperature 80°C. • Where normal working pressure exceeds the maximum, pressure limi• For optimum installation it is important that the valve is installed plum• Inline filters should be used to protect tapware from debris that may b NOTE: Polished Chrome versions shown Front View (No Diverter) Side View (No Diverter) All information is based on the latest product information avareserves the right to make changes in product characteristicPlease leave these instructions for the consumer. They 1. Flush the water supply pipes thoroughly to remove any de2. An in line water filter must be used with this product. 3. Inspect the supply pipes for damage. Replace as necessa4. Observe local plumbing codes. 5. If possible, install this basin set before installing the basin6. Recommended working pressure: 100KPa to 500KPa. 7. Maximum working pressure: 800KPa. 8. All installations should comply with the relevant requireme1155383-AN2-A 18/03/16 BEFORE YOU BEGIN INSTALLATION INSTRUCTIONS ROUGH-IN DIMENSIONS 15578A 1 Φ177 38~50 6567101 45 45 Hot Rc 1/2” inlet & outlet ports 77926A* 77927A* TAPWARE / SHOWER AND BATH Purist P - S&B ® Shower and Bath Mixer - 40mm Included Components • In wall valve • Trim kit Features • Diverter version allows water to be delivered through a bath spout or shower • Polished Chrome or Vibrant Rose Gold finish • Metal construction • Ceramic disc cartridge • Suitable for mains pressure • KOHLER finishes resist tarnishing and corrosion Finish Options (Colour swatches indicative only) Technical Details Product • Purist® shower or bath mixer only - 40mm • Purist® shower and bath mixer with diverter - 40mm Related Products • Purist accessories • Purist tapware Kohler Code 77927A* 77926A* Installation Notes: • Rc 1/2’’ female inlets. • Optimum working pressure 300-500 kPa. 77926A-BV - Vibrant Brushed Bronze 77927A-BV - Vibrant Brushed Bronze 77926A-BN - Vibrant Brushed Nickel 77927A-BN - Vibrant Brushed Nickel 77926A-PGD - Vibrant Moderne Polished Gold 77927A-PGD - Vibrant Moderne Polished Gold 77926A-RGD - Vibrant Rose Gold 77927A-RGD - Vibrant Rose Gold 77926A-CP - Polished Chrome 77927A-CP - Polished Chrome NOTE: Polished Chrome versions shown Front View (No Diverter) Side View (No Diverter) Front View (With Diverter) Side View (With Diverter) All information is based on the latest product information available at the time of publication. Kohler Co. reserves the right to make changes in product characteristics, packaging, or availability at any time without Please leave these instructions for the consumer. They contain important information. 1. Flush the water supply pipes thoroughly to remove any debris. 2. An in line water filter must be used with this product. 3. Inspect the supply pipes for damage. Replace as necessary. 4. Observe local plumbing codes. 5. If possible, install this basin set before installing the basin. 6. Recommended working pressure: 100KPa to 500KPa. 7. Maximum working pressure: 800KPa. 8. All installations should comply with the relevant requirements of AS/NZS 3500. Shower/Bath Mixer: 15578A Shower/Bath Mixer with diverter: 15577A BEFORE YOU BEGIN INSTALLATION INSTRUCTIONS ROUGH-IN DIMENSIONS 15578A 15577A Shower / bath Mixers - 40mm PURIST SHOWER / BATH TAPWARE Φ177 Φ177 38~50 6567101 38~50 6567101 OpenRc 1/2” inlet & outlet ports Rc 1/2” inlet & outlet ports 77926A* 77927A* TAPWARE / SHOWER AND BATH Purist P - S&B ® Shower and Bath Mixer - 40mm Included Components • In wall valve • Trim kit Features • Diverter version allows water to be delivered through a bath spout or shower • Polished Chrome or Vibrant Rose Gold finish • Metal construction • Ceramic disc cartridge • Suitable for mains pressure • KOHLER finishes resist tarnishing and corrosion Finish Options (Colour swatches indicative only) Technical Details Product • Purist® shower or bath mixer only - 40mm • Purist® shower and bath mixer with diverter - 40mm Related Products • Purist accessories • Purist tapware Kohler Code 77927A* 77926A* Installation Notes: • Rc 1/2’’ female inlets. 77926A-BV - Vibrant Brushed Bronze 77927A-BV - Vibrant Brushed Bronze 77926A-BN - Vibrant Brushed Nickel 77927A-BN - Vibrant Brushed Nickel 77926A-PGD - Vibrant Moderne Polished Gold 77927A-PGD - Vibrant Moderne Polished Gold 77926A-RGD - Vibrant Rose Gold 77927A-RGD - Vibrant Rose Gold 77926A-CP - Polished Chrome 77927A-CP - Polished Chrome NOTE: Polished Chrome versions shown Front View (No Diverter) Side View (No Diverter) Front View (With Diverter) Side View (With Diverter) All information is based on the latest product information available at the time of publication. Kohler Co. reserves the right to make changes in product characteristics, packaging, or availability at any time without Please leave these instructions for the consumer. They contain important information. 1. Flush the water supply pipes thoroughly to remove any debris. 2. An in line water filter must be used with this product. 3. Inspect the supply pipes for damage. Replace as necessary. 4. Observe local plumbing codes. 5. If possible, install this basin set before installing the basin. 6. Recommended working pressure: 100KPa to 500KPa. 7. Maximum working pressure: 800KPa. 8. All installations should comply with the relevant requirements of AS/NZS 3500. Shower/Bath Mixer: 15578A Shower/Bath Mixer with diverter: 15577A BEFORE YOU BEGIN INSTALLATION INSTRUCTIONS ROUGH-IN DIMENSIONS 15578A 15577A Shower / bath Mixers - 40mm PURIST SHOWER / BATH TAPWARE Φ177 Φ177 38~50 6567101 38~50 6567101 Rc 1/2” inlet & outlet ports Rc 1/2” inlet & outlet ports 77926A* 77927A* Front View Side View Australia www.kohler.com.au New Zealand www.kohler.co.nz Sizes are approximate. All measurements shown are in millimetres. Technical Details Installation Notes: • G½” female thread. • Optimum working pressure 300-500 kPa. • Inline filters should be used to protect tapware from debris that may be presenRelated Products • Purist tapware Side View G½” is equ5. Check for leaks before covering the pipes, repair as needed. 6. All installations should comply with the relevant requirements of AS/NZS 3500. ROUGH-IN DIMENSIONS 1221392-AN2-A 27/05/2016 1 G1/2˝ 204 Ø102 Ø32 Fringe of bath 162 Front View Side View Features • 40mm ceramic disc cartridge • Suitable for mains pressure Includes • Trim kit, In-wall valve Polished Chrome Code: 77927A-CP Rose Gold Code: 77927A-RGD Brushed Nickel Code: 77927A-BN Brushed Bronze Code: 77927A-BV Features • 40mm ceramic disc cartridge • Suitable for mains pressure Includes • Trim kit, In-wall valve with diverter Polished Chrome Code: 77926A-CP Rose Gold Code: 77926A-RGD Brushed Nickel Code: 77926A-BN Brushed Bronze Code: 77926A-BV Purist Bath or Shower Mixer Purist Bath and Shower Mixer with Diverter Rose Gold Polished Chrome Side View Side View Front View Front View Features • ¼ turn ceramic disc cartridges • Suitable for mains pressure Polished Chrome Code: 14428A-4-CP Rose Gold Code: 14428A-4-RGD Brushed Nickel Code: 14428A-4-BN Brushed Bronze Code: 14428A-4-BV Purist Hob Mount Bath Set with Lever handles Features • Suitable for mains pressure Polished Chrome Code: 14426A-CP Rose Gold Code: 14426A-RGD Brushed Nickel Code: 14426A-BN Brushed Bronze Code: 14426A-BV Purist Wall Mount Bath Spout Rose Gold Polished Chrome Side View Front View Side View *Note: Mixer must be purchased in addition to spout.

kohler.co.nz 085 Rc1/2” x 3 Ø100 Finished wall Ø160 32~52 3.5 14 Rc1/2” x 3 Rc1/2” x 4 Ø100 Finished wall Ø160 Finished wall 3.5 32~52 65 67 101 14 32~52 3.5 14 Rc1/2” x 3 Ø100 Finished wall 32~52 3.5 14 Rc1/2” x 3 Rc1/2” x 4 Ø100 Finished wall Ø160 Finished wall 3.5 32~52 65 67 101 14 32~52 3.5 14 Australia www.kohler.com.au New Zealand www.kohler.co.nz Sizes are approximate. All measurements shown are in millimetres. Purist TAPWARE /® Floor Mount Bath Filler November 2016 1182971-A04-H 202 221 920-940 801-821 670-690 148 307 120 10 44 45 13~33 307 20M85 Floor Joist 20 G1/2” G1/2” Technical Details Installation Notes: • Adequate floor support is required. The wood support must be a minimum of 2” (51mm) thick by 6” (152m 2x6 (38mm x 140mm) lumber is NOT adequate for this application. • Optimum working pressure 300-500 kPa. • Maximum hydrostatic pressure 800 kPa (This pressure may be exceeded only under test conditions). • Maximum temperature 80°C. • Inline filters should be used to protect tapware from debris that may be present within the plumbing. Product • Purist floor mount bath filler Included Components • 10129A-B4 Hand shower with 1.5m hos• 97905T-DR Floor mount fixing kit • Escutcheon Features • Integrated handshower with diverter • Single handle for on/off and temperature control • Metal construction • Ceramic disc valve • Polished chrome or Vibrant Rose Gold fi• Suitable for mains pressure • KOHLER finishes resist tarnishing and coFront View Side View G½” is equal to BSP½” Bath filler installation Related Products • Purist basins • Purist tapware NOTE: Polished Chrome version shown 78404A-BV - Vibrant Brushed B78404A-BN - Vibrant Brushed 78404A-PGD - Vibrant Modern78404A-CP - Polished Chrome 78404A-RGD - Vibrant Rose GPVD Colour Options (Colour swatches indica48 48 44 Features • 40mm ceramic disc cartridge • Suitable for mains pressure Includes • Trim kit, In-wall valve Polished Chrome Code: 25552A-CP Please note: No other finishes are available for this product. Features • 40mm ceramic disc cartridge • Suitable for mains pressure Includes • Trim kit, In-wall valve with diverter Polished Chrome Code: 25553A-CP Please note: No other finishes are available for this product. Purist Bath or Shower Mixer (Slim Trim) Purist Bath and Shower Mixer with Diverter (Slim Trim) Polished Chrome Polished Chrome Polished Chrome Side View Side View Front View Front View Features • Integrated multifunction hand shower with diverter • Suitable for mains pressure • WELS Rating: 3 Star, 9 litres/min Polished Chrome Code: 78404A-CP Rose Gold Code: 78404A-RGD Brushed Nickel Code: 78404A-BN Brushed Bronze Code: 78404A-BV Purist Floor Mount Bath Filler Side View Purist Robe Hook Polished Chrome Code: 14443-CP Rose Gold Code: 14443-RGD Brushed Nickel Code: 14443-BN Brushed Bronze Code: 14443-BV Isometric View Rose Gold For Purist Kitchen Mixer, see page 108.

KOHLER Tapware & Accessories tapware & accessories 086 160 48 111 76 225 64 152 48 Purist Toilet Tissue Holder Polished Chrome Code: 14441-CP Rose Gold Code: 14441-RGD Brushed Nickel Code: 14441-BN Brushed Bronze Code: 14441-BV Polished Chrome Code: 14444-CP Rose Gold Code: 14444-RGD Brushed Nickel Code: 14444-BN Brushed Bronze Code: 14444-BV Isometric View Isometric View Purist Towel Ring Polished Chrome Polished Chrome Polished Chrome Features • Sizes available: 457mm, 610mm, 762mm 457mm bar Code: 14435-CP 610mm bar Polished Chrome Code: 14436-CP 610mm bar Rose Gold Code: 14436-RGD 610mm bar Brushed Nickel Code: 14436-BN 610mm bar Brushed Bronze Code: 14436-BV 762mm bar Code: 14437-CP Purist Towel Bars Isometric Views 457mm 762mm 610mm Pictured: Purist Towel Ring, Towel Bar and Robe Hook

087

KOHLER Tapware & Accessories tapware & accessories 088 160 91 440 40 Max. 18º Ø33~Ø36 G1/2˝ 100 273 32740 Max. 205 120 G1/2˝ Ø33~Ø36 20º Taut Basin Mixer Taut Tall Basin Mixer Features • Ceramic disc cartridge • Suitable for mains pressure • WELS Rating: 5 Star, 6 litres/min Polished Chrome Code: 74013T-B4ND-CP Matte Black Code: 74013T-B4ND-BL Features • Ceramic disc cartridge • Metal construction • Suitable for mains pressure • WELS Rating: 5 Star, 6 litres/min Polished Chrome Code: 74026T-B4ND-CP Matte Black Code: 74026T-B4ND-BL Side View Side View Taut Melding thoughtful design with reliable performance, the Taut Tapware Collection brings elegant and affordable functionality to your bathroom. Available in polished chrome and matte black finishes. Polished Chrome (CP) Matte Black (BL)

kohler.co.nz 089 102 80 Ø64 170 70 G1/2” Hot Cold G1/2” Ø64 55~65 14 200 18o Rim of bath Recommend 102mm The finished wall 200 18º Ø64 G1/2˝ Finished Wall Rc1/2” x 4 Rc1/2” x 3 100 160 14 100 100 14 32~52 3.5 Finished Wall Finished Wall Rc1/2” x 4 Rc1/2” x 3 100 160 3.5 32~52 65 79 103 14 100 100 14 32~52 3.5 Finished Wall Rc1/2” x 3 10160 100 100 14 32~52 3.5 Finished Wall Finished Wall Rc1/2” x 4 Rc1/2” x 3 100 160 3.5 32~52 65 79 103 14 100 100 14 32~52 3.5 Taut Bath and Shower Mixer with Diverter (Slim Trim) Features • 40mm ceramic disc cartridge • Metal construction • Suitable for mains pressure Includes • In-wall valve with diverter • Trim kit Polished Chrome Code: 27915A-CP Matte Black Code: 27915A-BL Front View Side View Taut Bath or Shower Mixer (Slim Trim) Taut Wall Mount Bath Spout Taut Wall Mount Basin Mixer Features • 40mm ceramic disc cartridge • Metal construction • Suitable for mains pressure Includes • In-wall valve • Trim kit Polished Chrome Code: 27914A-CP Matte Black Code: 27914A-BL Features • Metal construction • Suitable for mains pressure Polished Chrome Code: 74046T-CP Matte Black Code: 74046T-BL Features • Metal construction • Suitable for mains pressure • WELS Rating: 5 Star, 6 litres/min Includes • In-wall valve • Trim kit Polished Chrome Code: 74027T-4ND-CP Matte Black Code: 74027T-4ND-BL Front View Front View Side View Side View Side View For Taut Kitchen Mixers, see page 108. Pictured: Taut Basin Mixer *Note: Mixer must be purchased in addition to spout.

KOHLER Tapware & Accessories tapware & accessories 090 G 1/2” Ø31~Ø37 100 18º 142 88 40Max. 450 Ø31~Ø37 159 14º G1/2˝ 323 268 40Max. 360 Finished wall 102 200 G1/2˝ Hot 13º 55~65 200 14 G1/2˝ Cold 70 170 80 92 Front View Side View Finished wall 102 200 G1/2˝ Hot 13º 55~65 200 14 G1/2˝ Cold 70 170 80 92 Front View Side View Aleo Basin Mixer Aleo Tall Basin Mixer Features • Ceramic disc cartridge • Metal construction • Suitable for mains pressure • WELS Rating: 5 Star, 6 litres/min Code: 72275T-4ND-CP Features • Ceramic disc cartridge • Metal construction • Suitable for mains pressure • WELS Rating: 5 Star, 6 litres/min Code: 98868T-4ND-CP Side View Side View Aleo State-of-the-art products inspired the Aleo tapware range – striking the perfect balance of minimalist design and intuitive function. Aleo Wall Mount Basin Mixer Features • Ceramic disc cartridge • WELS Rating: 5 Star, 6 litres/min Code: 79018T-4ND-CP Front View Side View Pictured: Aleo Basin Mixer

kohler.co.nz 091 100 100 Rc1/2” x 3 Finished wall 160 14 32~52 3.5 92 116 100 100 Rc1/2” x 3 Rc1/2” x 4 Finished wall 100 160 14 14 32~52 3.5 92 116 100 100 Rc1/2” x 3 Rc1/2” x 4 Finished wall 100 160 Finished wall 3.5 32~52 65 92 116 14 14 32~52 3.5 92 116 100 100 Rc1/2” x 3 Rc1/2” x 4 Finished wall 100 160 Finished wall 3.5 32~52 65 92 116 14 14 32~52 3.5 92 116 Finished wall 102 200 G1/2˝ Hot 13º 55~65 200 14 G1/2˝ Cold 70 170 80 92 Front View Side View Finished wall 102 200 G1/2˝ Hot 13º 55~65 200 14 G1/2˝ Cold 70 170 80 92 Front View Side View Aleo Bath or Shower Mixer (Slim Trim) Aleo Bath and Shower Mixer with Diverter (Slim Trim) Front View Front View Side View Side View Features • 40mm ceramic disc cartridge • Metal construction • Suitable for mains pressure Includes • In-wall valve • Trim kit Code: 25558A-CP Features • 40mm ceramic disc cartridge • Metal construction • Suitable for mains pressure Includes • In-wall valve with diverter • Trim kit Code: 25559A-CP Aleo Wall Mount Bath Mixer Features • Ceramic disc cartridge • WELS Rating: 5 Star, 6 litres/min Code: 21089T-4E-CP Front View Side View

KOHLER Tapware & Accessories tapware & accessories 092 32 71 32 32 67 102 114 121 210 32 103 457 103 32 610 32 148 610 610 32 315 83 32 83 212 83 177 32 610 32 71 32 32 67 114 121 32 103 457 103 32 610 32 148 610 32 179 610 85 360 32 315 83 32 83 212 83 177 32 149 610 32 32 71 32 32 103 457 103 32 610 32 179 610 32 315 83 32 83 83 177 32 149 32 July/Viteo With its gentle, flowing lines, the July/Viteo accessories collection evokes a clean, modern aesthetic, creating a sense of serenity in your bathroom. Code: 45397T-CP Isometric View July/Viteo Double Towel Bar 610mm Code: 45396T-CP Code: 9314T-CP Isometric View Isometric View July/Viteo Towel Bar 610mm July/Viteo Towel Bar 457mm

kohler.co.nz 093 114 121 32 103 457 103 32 610 32 148 610 32 179 610 85 360 32 315 32 83 212 149 610 32 32 103 103 32 32 179 610 149 632 32 71 32 32 67 11432 315 83 32 21283 177 32 32 71 32 32 67 114 121 32 103 457 103 32 610 32 148 632 179 610 85360 32 315 83 32 83 212 83 177 32 149 610 32 Code: 45400T-CP Isometric View July/Viteo Hotelier 610mm Code: 45401T-CP Isometric View July/Viteo Towel Ring 212mm Code: 9315T-CP Isometric View July/Viteo Glass Shelf 610mm Code: 45394T-CP Isometric View July/Viteo Robe Hook

KOHLER Tapware & Accessories tapware & accessories 094 32 71 32 32 103 457 103 32 6132 179 610 32 315 83 32 83 83 177 32 32 32 71 32 32 67 102 114 121 210 32 103 457 103 32 610 32 148 610 32 179 610 85 360 32 315 83 32 83 212 83 177 32 149 610 32 32 32 103 457 103 32 32 179 610 32 315 83 83 83 177 32 149 32 Code: 72901T-S Isometric View July/Viteo Toilet Brush Holder July/Viteo Double Toilet Tissue Holder Code: 9316T-CP Code: 45402T-CP Isometric View Isometric View July/Viteo Toilet Tissue Holder

kohler.co.nz 095 24 489 71 457 38 38 60 84 42 32 60 24 162 90 90 137 162 Pictured: July/Viteo Robe Hook and Toilet Tissue Holder Strayt The streamlined appearance and minimalist design of the Strayt range reflects a contemporary design that adds charm and character to modern bathrooms. Features • Sizes available: 457mm Code: 98419T-CP Isometric View Strayt Towel Bar 457mm Strayt Robe Hook / Double Robe Hook Robe hook Code: 37345T-CP Robe hook Double robe hook Code: 37346T-CP Double robe hook Isometric View Isometric View Strayt Horizontal / Covered Toilet Tissue Holder Horizontal toilet tissue holder Covered toilet tissue holder Horizontal toilet tissue holder Isometric View Isometric View Code: 37350T-CP Covered toilet tissue holder Code: 37351T-CP

KOHLER Tapware & Accessories tapware & accessories 096 660 78 50 610 78 50 10 254 507 50 78 457 355 78 50 305 Square Contemporary, square-looking range of accessories to compliment your chosen KOHLER tapware. Available in four finishes: Polished Chrome, Moderne Brushed Brass, Brushed Nickel and Matte Black. Brushed Nickel Square Towel Arm Features • Open-ended design for easy access • Premium metal construction for durability and reliability • KOHLER finishes resist corrosion and tarnishing Polished Chrome Code: 23291-CP Matte Black Code: 23291-BL Brushed Nickel Code: 23291-BN Brushed Brass Code: 23291-2MB Isometric View Square Towel Bars Features • Sizes available: 305mm, 457mm, 610mm • Premium metal construction for durability and reliability • KOHLER finishes resist corrosion and tarnishing 305mm bar Polished Chrome Code: 23286-CP Matte Black Code: 23286-BL Brushed Nickel Code: 23286-BN Moderne Brushed Brass Code: 23286-2MB 457mm bar Polished Chrome Code: 23284-CP Matte Black Code: 23284-BL Brushed Nickel Code: 23284-BN Moderne Brushed Brass Code: 23284-2MB 610mm bar Polished Chrome Code: 23285-CP Matte Black Code: 23285-BL Brushed Nickel Code: 23285-BN Moderne Brushed Brass Code: 23285-2MB Polished Chrome (CP) Brushed Nickel (BN) Moderne Brushed Brass (2MB) Matte Black (BL) Isometric Views 305mm, Brushed Nickel 610mm, Matte Black 457mm, Polished Chrome

kohler.co.nz 097 90 50 23 159 268 94 50 23 50 100 50 145 90 50 50 Polished Chrome Square Double Toilet Paper Holder Matte Black Square Toilet Paper Holder Features • Open-ended design for easy access • Premium metal construction for durability and reliability • KOHLER finishes resist corrosion and tarnishing Polished Chrome Code: 23292-CP Matte Black Code: 23292-BL Brushed Nickel Code: 23292-BN Brushed Brass Code: 23292-2MB Features • Holds two rolls of toilet paper • Premium metal construction for durability and reliability • KOHLER finishes resist corrosion and tarnishing Polished Chrome Code: 23288-CP Matte Black Code: 23288-BL Brushed Nickel Code: 23288-BN Brushed Brass Code: 23288-2MB Isometric View Isometric View Isometric View Square Vertical Toilet Paper Holder Features • Open-ended design for easy access • Premium metal construction for durability and reliability • KOHLER finishes resist corrosion and tarnishing Polished Chrome Code: 23289-CP Matte Black Code: 23289-BL Brushed Nickel Code: 23289-BN Brushed Brass Code: 23289-2MB Polished Chrome Isometric View Brushed Nickel Square Robe Hook Features • Open-ended design for easy access • Premium metal construction for durability and reliability • KOHLER finishes resist corrosion and tarnishing Polished Chrome Code: 23290-CP Matte Black Code: 23290-BL Brushed Nickel Code: 23290-BN Brushed Brass Code: 23290-2MB