Douglas Stamping Company 2016 Catalog

Douglas Stamping Company

2016 Catalog

Shims
Spacers
Washers
Stampings
NAAMS Components
Insulating Components
Laser Cutting and Engraving
Custom Flat Details

Stamping
Laser Cutting & Engraving

14231 W. Eleven Mile Road
Oak Park, MI 48237

248 542-3940 FAX 248 542-6342

http://dougstampco.com [email protected]

Douglas Stamping Company

Family owned and operated since 1947

Two Million Pieces, Ready to Go

Our in-stock inventory includes more than 3000 different types of shims, spacers,
washers, L-blocks, stop blocks and other standard details.

Shim and Spacer Experts

For 65 years, our customers have trusted us to quickly and cost effectively produce
specialty precision shims and spacers to meet a variety of requirements. Our vast
experience and ever-expanding capabilities get the job done on time and in spec.

Custom and Specialty Shims, Spacers, Washers and Details

We will make any shim ring, ring spacer, washer or other flat detail, in any quantity and
size, from any material.

Production Stamping and Laser Cutting

Our presses range from 19 to 80 tons, with automatic feed and roll straightening.
In-house fiber optic laser cutting is available for shorter runs and custom items.

Marking and Identification

We laser engrave and stamp mark a variety of materials, from single piece to
production runs. We can apply part numbers, logos and scale graduations.

Shim Stock

Our standard 1008-1010 full hard #1 temper #2 finish shim stock is available in metric
and standard thickness, in standard widths up to 8 inches. We also carry a variety of
raw shim stock, sold by the foot, to accommodate your specific width and thickness
requirements.

Special Materials and Finishes

Although most of our stampings are made from shim stock, we are experienced with a
wide variety of ferrous, non-ferrous, laminated and composite materials. Our fiber optic
laser can cut just about any metal, including copper, brass and titanium.

NAAMS Standard Components

Most of the standard details defined by the NAAMS Assembly and Stamping standards
are available through us with very short lead times. See pages 58-60 for examples of
these items.

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 2

Table of Contents

Design Considerations............................................................................. 4
Shims...................................................................................................... 5
Spacers................................................................................................... 37
Retainer Plates........................................................................................ 58
Keepers................................................................................................... 59
Insulating Bushings................................................................................. 60
Feeler Gages........................................................................................... 60
Weld ("D") Washers................................................................................. 61
Round Washers....................................................................................... 62
Insulating Washers.................................................................................. 63
NAAMS Components............................................................................... 63
Index........................................................................................................ 66

Ordering Products or Requesting a Quote

We accept orders by phone, fax, post or e-mail.

If you need something that is not in our catalog or the standards we supply, we are
happy to quote to your needs. Send us your specifications or stop in to discuss your
requirements.

Special Note Regarding Shims:

We take all possible precautions to avoid shipping of damaged product. The bulk
nature of manufacturing and shipping shims results in an occasional bent or mis-hit
shim getting past us. We will happily and immediately replace any unusable product.

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 3

Design Considerations

Specials and Custom Items
The shims, spacers and washers in this catalog represent a great deal of Douglas Stamping's product line, but not all of it.
We will make any shim, spacer or washer, in any size, shape and quantity you require. We make shims in a wide variety of
materials, including plastic, brass, copper, stainless steel and laminated stock, using stamping, laser cutting and traditional
machining.

Slots, Holes and Keyholes
Our shims are available with slots, "keyholes," and holes. Slotted shims are generally used in applications where complete
disassembly during adjustment is not practical or desirable. Keyhole shims are designed to pass over a threaded fastener
below the major diameter without falling out once the shim is lying flat. Most spacers are made with holes.

Shim Set Stackup Ratios
The shims we offer are available by the individual piece and in standard set ratios. These ratios are selected to permit
stepping through the entire range of the set in a certain increment. For example, the standard 5mm -M507 set permits
stepping from 0.25mm to 5.00mm in 0.25mm increments.

Set stackups offered are ones commonly ordered. If your requirements differ, all shims are available by the individual piece.
Please note that ordering shims by the set does not mean they will be assembled and packaged as sets! Unless other
arrangements are made in advance, all sets are bulk shipped. We will assemble and package individual sets for an
additional charge.

Part Numbers
This catalog is organized by our own numbering system that is consistant throughout our product lines. Prior to this
numbering system, there were no recognized standards for part numbers or thickness conventions. (Most of the shim and
spacer designs originated from multiple design sources from many different companies over a span of more than six
decades.) We encourage the use of DSC part numbers to help reduce problems arising from the many inconsistencies and
conflicts in the old systems. All original part numbers will continue to be recognized and indexed. If you are having difficulty
identifying a part number, try the index or give us a call for assistance.

Materials and Tolerances
Unless otherwise specified, all of our shims are made from full hard 1010 cold rolled #1 temper #2 finish steel. Spacers are
made from cold drawn 1018, machined or stamped and precision ground to the specified thickness. Critical thickness
tolerances are held within ±0.03mm, unless otherwise specified. (Imperial thicknesses are held within ±.002 inches.)

Weld Washers
"D" shaped weld washers offer a straight edge for easy welding after final locating of fasteners at assembly. These washers
are also used in close clearance locations.

Drawing Conventions
Slots and holes are assumed to be centered unless otherwise noted, in order to reduce clutter in the drawings. Dimensions
for shims and spacers are given in inches and in [millimeters] between the brackets. Drawings may not be to scale.

Additional Notes:
Shims with a thickness of 0.25mm are not black oxided, as they are easily damaged during processing. Shims with a
thickess of 0.50mm that have long, delicate fingers are not black oxided for the same reason.

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 4

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

DSCH001 Series - Individual Shims 0.40 [10.2]

DSC Part No. Description Thickness Other part numbers 0.75 [19.1]
0.38 [9.5]
DSCH001-M025.......... Metric thickness shim..... .25mm............ FSD 34492-54 1.00 [25.4]
DSCH001-M050.......... Metric thickness shim..... .50mm............ FSD 34492-53
DSCH001-M100.......... Metric thickness shim..... 1.00mm.......... FSD 34492-52
DSCH001-M200.......... Metric thickness shim..... 2.00mm..........FSD 34492-51
DSCH001-E015.......... Inch thickness shim........ .015 inch........ FSD 14180-54
DSCH001-E032.......... Inch thickness shim........ .031 Inch........ FSD 14180-52
DSCH001-E062.......... Inch thickness shim........ .062 inch........ FSD 14180-51

DSCH001 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH001-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH001-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH001-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH001-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH001-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH001-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 Inch

DSCH002 Series - Individual Shims 0.40 [10.2]

DSC Part No. Description Thickness Other part numbers

DSCH002-M025.......... Metric thickness shim..... .25mm............ FSD 34493-54, GSD-B-25 1.00 [25.4]
DSCH002-M050.......... Metric thickness shim..... .50mm............ FSD 34493-53, GSD-B-50 0.50 [12.6]
DSCH002-M100.......... Metric thickness shim..... 1.00mm.......... FSD 34493-52, GSD-B-1
DSCH002-M200.......... Metric thickness shim..... 2.00mm..........FSD 34493-51, GSD-B-2
DSCH002-E015.......... Inch thickness shim........ .015 inch........ FSD 14181-54
DSCH002-E032.......... Inch thickness shim........ .031 Inch........ FSD 14181-52
DSCH002-E062.......... Inch thickness shim........ .062 inch........ FSD 14181-51

DSCH002 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH002-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm 1.00 [25.4]
DSCH002-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH002-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH002-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH002-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH002-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 Inch

DSCH003 Series - Individual Shims 0.56 [14.2]
1.24 [31.5]
DSC Part No. Description Thickness Other part numbers

DSCH003-M025.......... Metric thickness shim..... .25mm............ FSD 34494-54 1.00 [25.4]
DSCH003-M050.......... Metric thickness shim..... .50mm............ FSD 34494-53 0.50 [12.7]
DSCH003-M100.......... Metric thickness shim..... 1.00mm.......... FSD 34494-52
DSCH003-M200.......... Metric thickness shim..... 2.00mm..........FSD 34494-51 .32R [8.1]
DSCH003-E015.......... Inch thickness shim........ .015 inch........ FSD 14129-54
DSCH003-E032.......... Inch thickness shim........ .031 Inch........ FSD 14129-52
DSCH003-E062.......... Inch thickness shim........ .062 inch........ FSD 14129-51

DSCH003 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH003-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH003-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH003-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH003-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH003-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH003-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 Inch

DSCH004 Series - Individual Shims 0.37 [9.5]
TYP
DSC Part No. Description Thickness Other part numbers
0.72 [18.3]
DSCH004-M025.......... Metric thickness shim..... .25mm............ FSD 34495-54
DSCH004-M050.......... Metric thickness shim..... .50mm............ FSD 34495-53 0.42 [10.7]
DSCH004-M100.......... Metric thickness shim..... 1.00mm.......... FSD 34495-52
DSCH004-M200.......... Metric thickness shim..... 2.00mm..........FSD 34495-51 .22R [5.6]
DSCH004-E015.......... Inch thickness shim........ .015 inch........ FSD 14050-54 TYP
DSCH004-E032.......... Inch thickness shim........ .031 Inch........ FSD 14050-52
DSCH004-E062.......... Inch thickness shim........ .062 inch........ FSD 14050-51

DSCH004 Series - Shim Sets

DSC Part No. Description Thickness Set includes 0.41 [10.4] 0.90 [22.9]
1.72 [43.7]
DSCH004-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH004-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH004-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH004-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH004-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH004-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 Inch

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 5 2015

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

DSCH005 Series - Individual Shims 0.32 [8.1] TYP

DSC Part No. Description Thickness Other part numbers

DSCH005-M025.......... Metric thickness shim..... .25mm............ FSD 34496-54 0.63 [15.9] 0.40 [10.2]
0.62 [15.7]
DSCH005-M050.......... Metric thickness shim..... .50mm............ FSD 34496-53 0.32 [8.1]
.18R [4.6] TYP
DSCH005-M100.......... Metric thickness shim..... 1.00mm.......... FSD 34496-52
DSCH005-M200.......... Metric thickness shim..... 2.00mm..........FSD 34496-51
DSCH005-E015.......... Inch thickness shim........ .015 inch........ FSD 14107-54
DSCH005-E032.......... Inch thickness shim........ .031 Inch........ FSD 14107-52
DSCH005-E062.......... Inch thickness shim........ .062 inch........ FSD 14107-51

DSCH005 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH005-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm 1.25 [31.8]
DSCH005-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH005-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH005-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH005-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH005-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 Inch

DSCH006 Series - Individual Shims

DSC Part No. Description Thickness Other part numbers 0.38 [9.7] TYP

DSCH006-M025.......... Metric thickness shim..... .25mm............ FSD 34497-54 0.75 [19.1]

DSCH006-M050.......... Metric thickness shim..... .50mm............ FSD 34497-53 0.43 [10.9]
DSCH006-M100.......... Metric thickness shim..... 1.00mm.......... FSD 34497-52 .22R [5.6] TYP

DSCH006-M200.......... Metric thickness shim..... 2.00mm..........FSD 34497-51
DSCH006-E015.......... Inch thickness shim........ .015 inch........ FSD 14066-54
DSCH006-E032.......... Inch thickness shim........ .031 Inch........ FSD 14066-52
DSCH006-E062.......... Inch thickness shim........ .062 inch........ FSD 14066-51

DSCH006 Series - Shim Sets

DSC Part No. Description Thickness Set includes 0.40 [10.2]
0.58 [14.7]
DSCH006-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH006-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm 1.38 [35.1]
DSCH006-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH006-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH006-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH006-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 Inch

DSCH007 Series - Individual Shims

DSC Part No. Description Thickness Other part numbers 0.44 [11.2] TYP
0.49 [12.4]
DSCH007-M025.......... Metric thickness shim..... .25mm............ FSD 34498-54 0.75 [19.1]

DSCH007-M050.......... Metric thickness shim..... .50mm............ FSD 34498-53 .26R [6.6]
TYP
DSCH007-M100.......... Metric thickness shim..... 1.00mm.......... FSD 34498-52
DSCH007-M200.......... Metric thickness shim..... 2.00mm..........FSD 34498-51
DSCH007-E015.......... Inch thickness shim........ .015 inch........ FSD 14067-54
DSCH007-E032.......... Inch thickness shim........ .031 Inch........ FSD 14067-52
DSCH007-E062.......... Inch thickness shim........ .062 inch........ FSD 14067-51

DSCH007 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH007-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm 0.44 [11.2] 0.80 [20.3]
1.68 [42.7]
DSCH007-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm

DSCH007-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm

DSCH007-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH007-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH007-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 Inch

DSCH008 Series - Individual Shims

DSC Part No. Description Thickness Other part numbers 0.44 [11.2] TYP
0.49 [12.4]
DSCH008-M025.......... Metric thickness shim..... .25mm............ FSD 34499-54 0.75 [19.0]

DSCH008-M050.......... Metric thickness shim..... .50mm............ FSD 34499-53 .26R [6.6]
TYP
DSCH008-M100.......... Metric thickness shim..... 1.00mm.......... FSD 34499-52
DSCH008-M200.......... Metric thickness shim..... 2.00mm..........FSD 34499-51
DSCH008-E015.......... Inch thickness shim........ .015 inch........ FSD 14051-54
DSCH008-E032.......... Inch thickness shim........ .031 Inch........ FSD 14051-52
DSCH008-E062.......... Inch thickness shim........ .062 inch........ FSD 14051-51

DSCH008 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH008-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm 0.44 [11.2] 1.12 [28.4]
2.00 [50.8]
DSCH008-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm

DSCH008-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm

DSCH008-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH008-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH008-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 Inch

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 6 2015

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

DSCH009 Series - Individual Shims 0.44 [11.2] 0.52 [13.2]
TYP (2)
DSC Part No. Description Thickness Other part numbers
0.49 [12.4]
DSCH009-M025.......... Metric thickness shim..... .25mm............ FSD 34500-54 0.75 [19.1]

DSCH009-M050.......... Metric thickness shim..... .50mm............ FSD 34500-53 R0.26
TYP
DSCH009-M100.......... Metric thickness shim..... 1.00mm.......... FSD 34500-52
DSCH009-M200.......... Metric thickness shim..... 2.00mm..........FSD 34500-51
DSCH009-E015.......... Inch thickness shim........ .015 inch........ FSD 14056-54
DSCH009-E032.......... Inch thickness shim........ .031 Inch........ FSD 14056-52
DSCH009-E062.......... Inch thickness shim........ .062 inch........ FSD 14056-51

DSCH009 Series - Shim Sets 0.81 [20.6]
TYP
DSC Part No. Description Thickness Set includes 0.44 [11.2]
2.50 [63.5]
DSCH009-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH009-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH009-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH009-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH009-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH009-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 Inch

DSCH010 Series - Individual Shims 0.44 [11.2]
TYP (2)
DSC Part No. Description Thickness Other part numbers 0.52 [13.2]
0.49 [12.4]
DSCH010-M025.......... Metric thickness shim..... .25mm............ FSD 34501-54 0.75 [19.1]

DSCH010-M050.......... Metric thickness shim..... .50mm............ FSD 34501-53

DSCH010-M100.......... Metric thickness shim..... 1.00mm.......... FSD 34501-52
DSCH010-M200.......... Metric thickness shim..... 2.00mm..........FSD 34501-51
DSCH010-E015.......... Inch thickness shim........ .015 inch........ FSD 14058-54
DSCH010-E032.......... Inch thickness shim........ .031 Inch........ FSD 14058-52
DSCH010-E062.......... Inch thickness shim........ .062 inch........ FSD 14058-51

DSCH010 Series - Shim Sets 1.06 [26.9]
TYP
DSC Part No. Description Thickness Set includes 0.44 [11.2]
3.00 [76.2]
DSCH010-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH010-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm R0.26 [6.6]
DSCH010-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm TYP
DSCH010-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH010-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH010-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 Inch

DSCH011 Series - Individual Shims

DSC Part No. Description Thickness Other part numbers 0.44 [11.2] 0.52 [13.2]
TYP (2) TYP (2)
DSCH011-M025.......... Metric thickness shim..... .25mm............ FSD 34502-54
0.75 [19.1]
DSCH011-M050.......... Metric thickness shim..... .50mm............ FSD 34502-53 0.49 [12.4]
DSCH011-M100.......... Metric thickness shim..... 1.00mm.......... FSD 34502-52

DSCH011-M200.......... Metric thickness shim..... 2.00mm..........FSD 34502-51
DSCH011-E015.......... Inch thickness shim........ .015 inch........ FSD 14059-54
DSCH011-E032.......... Inch thickness shim........ .031 Inch........ FSD 14059-52
DSCH011-E062.......... Inch thickness shim........ .062 inch........ FSD 14059-51

DSCH011 Series - Shim Sets

DSC Part No. Description Thickness Set includes 0.44 [11.2] 0.88 [22.4] TYP

DSCH011-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm

DSCH011-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm 3.50 [88.9]

DSCH011-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm

DSCH011-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm .26R [6.6]
TYP
DSCH011-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH011-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 Inch

DSCH012 Series - Individual Shims 0.44 [11.2]
TYP
DSC Part No. Description Thickness Other part numbers

DSCH012-M025.......... Metric thickness shim..... .25mm............ FSD 34503-54 0.94 [23.9]
0.46 [11.7]
DSCH012-M050.......... Metric thickness shim..... .50mm............ FSD 34503-53

DSCH012-M100.......... Metric thickness shim..... 1.00mm.......... FSD 34503-52
DSCH012-M200.......... Metric thickness shim..... 2.00mm..........FSD 34503-51
DSCH012-E015.......... Inch thickness shim........ .015 inch........ FSD 14052-54
DSCH012-E032.......... Inch thickness shim........ .031 Inch........ FSD 14052-52
DSCH012-E062.......... Inch thickness shim........ .062 inch........ FSD 14052-51

DSCH012 Series - Shim Sets 0.54 [13.7]

DSC Part No. Description Thickness Set includes

DSCH012-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm 1.46 [37.1]
DSCH012-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm 2.38 [60.5]
DSCH012-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm .26R [6.6] TYP
DSCH012-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH012-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH012-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 Inch

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 7 2015

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

DSCH013 Series - Individual Shims 0.56 [14.2]
TYP
DSC Part No. Description Thickness Other part numbers
0.54 [13.7]
DSCH013-M025.......... Metric thickness shim..... .25mm............ FSD 34504-54 1.00 [25.4]

DSCH013-M050.......... Metric thickness shim..... .50mm............ FSD 34504-53 .32R [8.1]
TYP
DSCH013-M100.......... Metric thickness shim..... 1.00mm.......... FSD 34504-52
DSCH013-M200.......... Metric thickness shim..... 2.00mm..........FSD 34504-51
DSCH013-E015.......... Inch thickness shim........ .015 inch........ FSD 14053-54
DSCH013-E032.......... Inch thickness shim........ .031 Inch........ FSD 14053-52
DSCH013-E062.......... Inch thickness shim........ .062 inch........ FSD 14053-51

DSCH013 Series - Shim Sets 0.66 [16.8] 1.60 [40.6]
2.92 [74.2]
DSC Part No. Description Thickness Set includes

DSCH013-M454........... Four piece metric shim set...... 4.50mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH013-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH013-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH013-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH013-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH013-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 Inch

DSCH014 Series - Individual Shims 0.56 [14.2]
0.70 [17.8]
DSC Part No. Description Thickness Other part numbers

DSCH014-M025.......... Metric thickness shim..... .25mm............ FSD 34505-54 1.00 [25.4]

DSCH014-M050.......... Metric thickness shim..... .50mm............ FSD 34505-53
DSCH014-M100.......... Metric thickness shim..... 1.00mm.......... FSD 34505-52
DSCH014-M200.......... Metric thickness shim..... 2.00mm..........FSD 34505-51
DSCH014-E015.......... Inch thickness shim........ .015 inch........ FSD 14068-54
DSCH014-E032.......... Inch thickness shim........ .031 Inch........ FSD 14068-52
DSCH014-E062.......... Inch thickness shim........ .062 inch........ FSD 14068-51

DSCH014 Series - Shim Sets

DSC Part No. Description Thickness Set includes 0.58 [14.6] 1.75 [44.5]

DSCH014-M454........... Four piece metric shim set...... 4.50mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm

DSCH014-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm 2.90 [73.7]

DSCH014-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm

DSCH014-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm .32R [8.1] TYP

DSCH014-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH014-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 Inch

DSCH015 Series - Individual Shims 0.56 [14.2] 0.64 [16.3]
TYP (2) TYP (2)
DSC Part No. Description Thickness Other part numbers
0.70 [17.8] 1.00 [25.4]
DSCH015-M025.......... Metric thickness shim..... .25mm............ FSD 34506-54
1.00 [25.4] TYP
DSCH015-M050.......... Metric thickness shim..... .50mm............ FSD 34506-53 4.24 [107.7]

DSCH015-M100.......... Metric thickness shim..... 1.00mm.......... FSD 34506-52 .32R [8.1] TYP
DSCH015-M200.......... Metric thickness shim..... 2.00mm..........FSD 34506-51
DSCH015-E015.......... Inch thickness shim........ .015 inch........ FSD 14202-54
DSCH015-E032.......... Inch thickness shim........ .031 Inch........ FSD 14202-52
DSCH015-E062.......... Inch thickness shim........ .062 inch........ FSD 14202-51

DSCH015 Series - Shim Sets 0.62 [15.6]

DSC Part No. Description Thickness Set includes

DSCH015-M454........... Four piece metric shim set...... 4.50mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH015-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH015-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH015-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH015-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH015-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 Inch

DSCH016 Series - Individual Shims 0.56 [14.2]

DSC Part No. Description Thickness Other part numbers 0.28 [7.1]

DSCH016-M025.......... Metric thickness shim..... .25mm............ FSD 34507-54 0.22 [5.6] 0.88 [22.4] 45°
0.44 [11.2] 0.44 [11.2]
DSCH016-M050.......... Metric thickness shim..... .50mm............ FSD 34507-53

DSCH016-M100.......... Metric thickness shim..... 1.00mm.......... FSD 34507-52
DSCH016-M200.......... Metric thickness shim..... 2.00mm..........FSD 34507-51
DSCH016-E015.......... Inch thickness shim........ .015 inch........ FSD 14190-54
DSCH016-E032.......... Inch thickness shim........ .031 Inch........ FSD 14190-52
DSCH016-E062.......... Inch thickness shim........ .062 inch........ FSD 14190-51

DSCH016 Series - Shim Sets .10R [2.5]
TYP
DSC Part No. Description Thickness Set includes
.14R [3.6]
DSCH016-M454........... Four piece metric shim set...... 4.50mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm TYP 0.50 [12.7]
DSCH016-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm 1.00 [25.4]
DSCH016-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH016-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH016-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH016-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 Inch

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 8 2015

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

DSCH017 Series - Individual Shims 0.74 [18.8]
0.37 [9.4]
DSC Part No. Description Thickness Other part numbers
0.62 [15.7]
DSCH017-M025.......... Metric thickness shim..... .25mm............ FSD 34508-54 0.25 [6.4] 1.24 [31.5] 1.00 [25.4] 45°
0.50 [12.7]
DSCH017-M050.......... Metric thickness shim..... .50mm............ FSD 34508-53
0.50 [12.7]
DSCH017-M100.......... Metric thickness shim..... 1.00mm.......... FSD 34508-52
DSCH017-M200.......... Metric thickness shim..... 2.00mm..........FSD 34508-51
DSCH017-E015.......... Inch thickness shim........ .015 inch........ FSD 14108-54
DSCH017-E032.......... Inch thickness shim........ .031 Inch........ FSD 14108-52
DSCH017-E062.......... Inch thickness shim........ .062 inch........ FSD 14108-51

DSCH017 Series - Shim Sets .14R [3.6]
TYP

DSC Part No. Description Thickness Set includes

DSCH017-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH017-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH017-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH017-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH017-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH017-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 Inch

DSCH018 Series - Individual Shims 0.74 [18.8]

DSC Part No. Description Thickness Other part numbers 0.37 [9.4]

DSCH018-M025.......... Metric thickness shim..... .25mm............ FSD 34509-54 0.37 [9.4] 1.24 [31.5]
0.74 [18.8]
DSCH018-M050.......... Metric thickness shim..... .50mm............ FSD 34509-53 45°
DSCH018-M100.......... Metric thickness shim..... 1.00mm.......... FSD 34509-52

DSCH018-M200.......... Metric thickness shim..... 2.00mm..........FSD 34509-51
DSCH018-E015.......... Inch thickness shim........ .015 inch........ FSD 14109-54
DSCH018-E032.......... Inch thickness shim........ .031 Inch........ FSD 14109-52
DSCH018-E062.......... Inch thickness shim........ .062 inch........ FSD 14109-51

DSCH018 Series - Shim Sets 0.62 [15.7]

DSC Part No. Description Thickness Set includes .13R [3.3]

DSCH018-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm TYP (2)

DSCH018-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm 0.62 [15.7]
DSCH018-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm .18R [4.6] 1.24 [31.5]

DSCH018-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH018-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH018-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 Inch

DSCH019 Series - Individual Shims 0.86 [21.8]

DSC Part No. Description Thickness Other part numbers 0.43 [10.9]

DSCH019-M025.......... Metric thickness shim..... .25mm............ FSD 34510-54 0.43 [10.9] 1.50 [38.1] 45°
0.86 [21.8] 0.75 [19.1]
DSCH019-M050.......... Metric thickness shim..... .50mm............ FSD 34510-53

DSCH019-M100.......... Metric thickness shim..... 1.00mm.......... FSD 34510-52
DSCH019-M200.......... Metric thickness shim..... 2.00mm..........FSD 34510-51
DSCH019-E015.......... Inch thickness shim........ .015 inch........ FSD 14075-54
DSCH019-E032.......... Inch thickness shim........ .031 Inch........ FSD 14075-52
DSCH019-E062.......... Inch thickness shim........ .062 inch........ FSD 14075-51

DSCH019 Series - Shim Sets

DSC Part No. Description Thickness Set includes .16R [4.1]
TYP (2)
DSCH019-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm 0.75 [19.1]
DSCH019-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm .22R [5.6] 1.50 [38.1]
DSCH019-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH019-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH019-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH019-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 Inch

DSCH020 Series - Individual Shims 0.86 [21.8]

DSC Part No. Description Thickness Other part numbers 0.43 [10.9]

DSCH020-M025.......... Metric thickness shim..... .25mm............ FSD 34511-54 0.68 [17.3] 2.00 [50.8] 45°
1.36 [34.5] 1.00 [25.4]
DSCH020-M050.......... Metric thickness shim..... .50mm............ FSD 34511-53

DSCH020-M100.......... Metric thickness shim..... 1.00mm.......... FSD 34511-52
DSCH020-M200.......... Metric thickness shim..... 2.00mm..........FSD 34511-51
DSCH020-E015.......... Inch thickness shim........ .015 inch........ FSD 14076-54
DSCH020-E032.......... Inch thickness shim........ .031 Inch........ FSD 14076-52
DSCH020-E062.......... Inch thickness shim........ .062 inch........ FSD 14076-51

DSCH020 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH020-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm .16R [4.1] 0.75 [19.1]
DSCH020-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm TYP (2) 1.50 [38.1]
DSCH020-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH020-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm .22R [5.6]
DSCH020-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH020-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 Inch

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 9 2015

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

DSCH021 Series - Individual Shims

DSC Part No. Description Thickness Other part numbers

DSCH021-M025.......... Metric thickness shim..... .25mm............ FSD 39558-54 1.25 [31.8] 0.62 [15.7]

DSCH021-M050.......... Metric thickness shim..... .50mm............ FSD 39558-53

DSCH021-M100.......... Metric thickness shim..... 1.00mm.......... FSD 39558-52
DSCH021-M200.......... Metric thickness shim..... 2.00mm..........FSD 39558-51
DSCH021-E015.......... Inch thickness shim........ .015 inch........ FSD 39600-54
DSCH021-E032.......... Inch thickness shim........ .031 Inch........ FSD 39600-52
DSCH021-E062.......... Inch thickness shim........ .062 inch........ FSD 39600-51

DSCH021 Series - Shim Sets 2.75 [69.9]
3.50 [88.9]
DSC Part No. Description Thickness Set includes

DSCH021-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH021-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH021-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH021-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH021-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH021-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 Inch

DSCH022 Series - Individual Shims

DSC Part No. Description Thickness Other part numbers

DSCH022-M025.......... Metric thickness shim..... .25mm............ FSD 39559-54 1.25 [31.8] 0.62 [15.7]

DSCH022-M050.......... Metric thickness shim..... .50mm............ FSD 39559-53

DSCH022-M100.......... Metric thickness shim..... 1.00mm.......... FSD 39559-52

DSCH022-M200.......... Metric thickness shim..... 2.00mm..........FSD 39559-51
DSCH022-E015.......... Inch thickness shim........ .015 inch........ FSD 39601-54
DSCH022-E032.......... Inch thickness shim........ .031 Inch........ FSD 39601-52
DSCH022-E062.......... Inch thickness shim........ .062 inch........ FSD 39601-51

DSCH022 Series - Shim Sets 4.75 [120.7]
5.50 [139.7]
DSC Part No. Description Thickness Set includes

DSCH022-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH022-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH022-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH022-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH022-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH022-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 Inch

DSCH023 Series - Individual Shims

DSC Part No. Description Thickness Other part numbers

DSCH023-M025.......... Metric thickness shim..... .25mm............ DSC-625S-54 1.25 [31.8] 0.62 [15.7]

DSCH023-M050.......... Metric thickness shim..... .50mm............ DSC-625S-53 1.13 [28.7]
1.88 [47.8]
DSCH023-M100.......... Metric thickness shim..... 1.00mm.......... DSC-625S-52
DSCH023-M200.......... Metric thickness shim..... 2.00mm.......... DSC-625S-51
DSCH023-E015.......... Inch thickness shim........ .015 inch........ 125187-54
DSCH023-E032.......... Inch thickness shim........ .031 Inch........ 125187-52
DSCH023-E062.......... Inch thickness shim........ .062 inch........ 125187-51

DSCH023 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH023-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH023-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH023-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH023-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH023-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH023-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 Inch

DSCH024 Series - Individual Shims 0.98 [24.9]

DSC Part No. Description Thickness Other part numbers 0.49 [12.4]

DSCH024-M025.......... Metric thickness shim..... .25mm............ FSD 40800-54
DSCH024-M050.......... Metric thickness shim..... .50mm............ FSD 40800-53
DSCH024-M100.......... Metric thickness shim..... 1.00mm.......... FSD 40800-52
DSCH024-M200.......... Metric thickness shim..... 2.00mm..........FSD 40800-51

0.37 [9.4] 1.24 [31.5] 45°
0.74 [18.8] 0.62 [15.7]

DSCH024 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH024-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm .20R [5.1] TYP

DSCH024-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm 0.75 [19.1]
1.50 [38.1]
DSCH024-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm

DSCH024-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH024-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 10 2015

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

DSCH025 Series - Individual Shims 0.40 [10.2]
TYP

DSC Part No. Description Thickness Other part numbers

DSCH025-M025.......... Metric thickness shim..... .25mm............ FSD 40801-54 0.94 [23.9]
DSCH025-M050.......... Metric thickness shim..... .50mm............ FSD 40801-53
DSCH025-M100.......... Metric thickness shim..... 1.00mm.......... FSD 40801-52
DSCH025-M200.......... Metric thickness shim..... 2.00mm..........FSD 40801-51

0.54 [13.7]

DSCH025 Series - Shim Sets 0.50 [12.7] 1.38 [35.1]
2.38 [60.5]
DSC Part No. Description Thickness Set includes

DSCH025-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH025-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH025-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH025-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH025-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH026 Series - Individual Shims 0.34 [8.7] TYP

DSC Part No. Description Thickness Other part numbers 0.44 [11.2]
0.49 [12.5]
DSCH026-M025.......... Metric thickness shim..... .25mm............ FSD 40827-50 0.75 [19.1]
DSCH026-M050.......... Metric thickness shim..... .50mm............ FSD 40827-51 TYP
DSCH026-M100.......... Metric thickness shim..... 1.00mm.......... FSD 40827-52 1.50 [38.1]
DSCH026-M200.......... Metric thickness shim..... 2.00mm..........FSD 40827-53

DSCH026 Series - Shim Sets

DSC Part No. Description Thickness Set includes 0.26 [6.6]

DSCH026-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm

DSCH026-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm

DSCH026-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm

DSCH026-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH026-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH027 Series - Individual Shims 1.00 [25.4]
0.75 [19.1]
DSC Part No. Description Thickness Other part numbers 0.34 [8.7]
TYP 0.49 [12.5]
DSCH027-M025.......... Metric thickness shim..... .25mm............ FSD 40828-50
DSCH027-M050.......... Metric thickness shim..... .50mm............ FSD 40828-51
DSCH027-M100.......... Metric thickness shim..... 1.00mm.......... FSD 40828-52
DSCH027-M200.......... Metric thickness shim..... 2.00mm..........FSD 40828-53

DSCH027 Series - Shim Sets 0.44 [11.2]
0.26 [6.6]
DSC Part No. Description Thickness Set includes

DSCH027-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH027-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH027-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH027-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH027-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH028 Series - Individual Shims 0.34 [8.7]
TYP
DSC Part No. Description Thickness Other part numbers
0.75 [19.1]
DSCH028-M025.......... Metric thickness shim..... .25mm............ FSD 40829-50
DSCH028-M050.......... Metric thickness shim..... .50mm............ FSD 40829-51 0.55 [14.0]
DSCH028-M100.......... Metric thickness shim..... 1.00mm.......... FSD 40829-52 TYP
DSCH028-M200.......... Metric thickness shim..... 2.00mm..........FSD 40829-53
2.00 [50.8]
0.44 [11.2]

DSCH028 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH028-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm 0.45 [11.4]

DSCH028-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm

DSCH028-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm

DSCH028-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH028-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 11 2015

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

DSCH029 Series - Individual Shims 0.44 [11.2]
0.50 [12.7]
DSC Part No. Description Thickness Other part numbers

DSCH029-M025.......... Metric thickness shim..... .25mm............ FSD 40891-54 1.00 [25.4]
DSCH029-M050.......... Metric thickness shim..... .50mm............ FSD 40891-53
DSCH029-M100.......... Metric thickness shim..... 1.00mm.......... FSD 40891-52
DSCH029-M200.......... Metric thickness shim..... 2.00mm..........FSD 40891-51

DSCH029 Series - Shim Sets

DSC Part No. Description Thickness Set includes 0.50 [12.7]

DSCH029-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm 1.00 [25.4]
DSCH029-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH029-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH029-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH029-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH030 Series - Individual Shims 1.50 [38.1]

DSC Part No. Description Thickness Other part numbers 0.44 [11.2]
TYP
DSCH030-M025.......... Metric thickness shim..... .25mm............ FSD 40892-54
DSCH030-M050.......... Metric thickness shim..... .50mm............ FSD 40892-53
DSCH030-M100.......... Metric thickness shim..... 1.00mm.......... FSD 40892-52
DSCH030-M200.......... Metric thickness shim..... 2.00mm..........FSD 40892-51

DSCH030 Series - Shim Sets 0.50 [12.7] 1.00 [25.4]
0.44 [11.1] 0.63 [15.9]
DSC Part No. Description Thickness Set includes

DSCH030-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH030-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH030-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH030-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH030-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH031 Series - Individual Shims 0.44 [11.2]
TYP
DSC Part No. Description Thickness Other part numbers
1.00 [25.4]
DSCH031-M025.......... Metric thickness shim..... .25mm............ FSD 40893-54
DSCH031-M050.......... Metric thickness shim..... .50mm............ FSD 40893-53 0.63 [15.9]
DSCH031-M100.......... Metric thickness shim..... 1.00mm.......... FSD 40893-52 TYP
DSCH031-M200.......... Metric thickness shim..... 2.00mm..........FSD 40893-51
2.13 [54.0]
DSCH031 Series - Shim Sets 0.50 [12.7]

DSC Part No. Description Thickness Set includes

DSCH031-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm 0.44 [11.1]
DSCH031-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm

DSCH031-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm

DSCH031-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH031-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH032 Series - Individual Shims 0.44 [11.2]
TYP
DSC Part No. Description Thickness Other part numbers
0.63 [15.9]
DSCH032-M025.......... Metric thickness shim..... .25mm............ FSD 40894-54 TYP
DSCH032-M050.......... Metric thickness shim..... .50mm............ FSD 40894-53
DSCH032-M100.......... Metric thickness shim..... 1.00mm.......... FSD 40894-52 2.75 [69.9]
DSCH032-M200.......... Metric thickness shim..... 2.00mm..........FSD 40894-51

1.00 [25.4]

0.50 [12.7]

DSCH032 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH032-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm 0.44 [11.1]

DSCH032-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm

DSCH032-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm

DSCH032-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH032-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 12 2015

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Unless noted, metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

0.44 [11.2] TYP

DSCH033 Series - Individual Shims

DSC Part No. Description Thickness Other part numbers

DSCH033-M025.......... Metric thickness shim..... .25mm............ FSD 40895-54 1.00 [25.4]
DSCH033-M050.......... Metric thickness shim..... .50mm............ FSD 40895-53
DSCH033-M100.......... Metric thickness shim..... 1.00mm.......... FSD 40895-52
DSCH033-M200.......... Metric thickness shim..... 2.00mm..........FSD 40895-51

0.50 [12.7]

DSCH033 Series - Shim Sets 0.44 [11.1] 0.63 [15.9] TYP
3.38 [85.7]
DSC Part No. Description Thickness Set includes

DSCH033-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH033-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH033-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH033-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH033-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH034 Series - Individual Shims .41Ø [10.5Ø]
0.68 [17.3]
DSC Part No. Description Thickness Other part numbers
0.68 [17.3]
DSCH034-M025.......... Metric thickness shim..... .25mm............ FSD 41256-51
DSCH034-M050.......... Metric thickness shim..... .50mm............ FSD 41256-52
DSCH034-M100.......... Metric thickness shim..... 1.00mm.......... FSD 41256-53
DSCH034-M200.......... Metric thickness shim..... 2.00mm..........FSD 41256-54

DSCH034 Series - Shim Sets 0.25mm and 2.00mm unfinished
0.50mm yellow dichromate
1.00mm black oxide

DSC Part No. Description Thickness Set includes

DSCH034-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH034-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH034-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH034-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH034-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH035 Series - Individual Shims

DSC Part No. Description Thickness Other part numbers 0.41 [10.5]

DSCH035-M025.......... Metric thickness shim..... .25mm............ FSD 41257-51
DSCH035-M050.......... Metric thickness shim..... .50mm............ FSD 41257-52
DSCH035-M100.......... Metric thickness shim..... 1.00mm.......... FSD 41257-53
DSCH035-M200.......... Metric thickness shim..... 2.00mm..........FSD 41257-54

0.25mm and 2.00mm unfinished 0.68 [17.3]
0.50mm yellow dichromate
1.00mm black oxide 0.34 [8.5]

DSCH035 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH035-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm 0.68 [17.3]
DSCH035-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH035-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH035-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH035-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH036 Series - Individual Shims

DSC Part No. Description Thickness Other part numbers

DSCH036-M025.......... Metric thickness shim..... .25mm............ ASH102 0.98 [25.0] 0.41 [10.5]
DSCH036-M050.......... Metric thickness shim..... .50mm............ ASH105 2.56 [65.0]
DSCH036-M100.......... Metric thickness shim..... 1.00mm.......... ASH110
DSCH036-M200.......... Metric thickness shim..... 2.00mm.......... ASH120

DSCH036 Series - Shim Sets 0.25mm and 2.00mm unfinished
0.50mm yellow dichromate
1.00mm black oxide

DSC Part No. Description Thickness Set includes 0.39 [10.0]

DSCH036-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm

DSCH036-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm

DSCH036-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm

DSCH036-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH036-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 13 2015

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Unless noted, metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

DSCH037 Series - Individual Shims 0.41 [10.5] 1.34 [34.0]
TYP 0.98 [25.0]
DSC Part No. Description Thickness Other part numbers
0.49 [12.5] 0.59 [15.0]
DSCH037-M025.......... Metric thickness shim..... .25mm............ FSD 41258-51, ASH202 0.37 [9.5]
DSCH037-M050.......... Metric thickness shim..... .50mm............ FSD 41258-52, ASH205
DSCH037-M100.......... Metric thickness shim..... 1.00mm.......... FSD 41258-53, ASH210
DSCH037-M200.......... Metric thickness shim..... 2.00mm..........FSD 41258-54, ASH220

DSCH037 Series - Shim Sets 0.25mm and 2.00mm unfinished
0.50mm yellow dichromate
1.00mm black oxide

DSC Part No. Description Thickness Set includes

DSCH037-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH037-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH037-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH037-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH037-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH038 Series - Individual Shims 0.41 [10.5]
TYP
DSC Part No. Description Thickness Other part numbers

DSCH038-M025.......... Metric thickness shim..... .25mm............ FSD 41259-51, ASH302, 56ZF28682-0

DSCH038-M050.......... Metric thickness shim..... .50mm............ FSD 41259-52, ASH305, 56ZF28682-1
DSCH038-M100.......... Metric thickness shim..... 1.00mm.......... FSD 41259-53, ASH310, 56ZF28682-2
DSCH038-M200.......... Metric thickness shim..... 2.00mm..........FSD 41259-54, ASH320, 56ZF28682-3

0.25mm and 2.00mm unfinished 0.49 [12.5] 0.98 [25.0]
0.50mm yellow dichromate
DSCH038 Series - Shim Sets 1.00mm black oxide 0.59 [15.0]
TYP
DSC Part No. Description Thickness Set includes
1.89 [48.0]
DSCH038-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm 0.35 [9.0]
DSCH038-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm

DSCH038-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH038-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH038-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH039 Series - Individual Shims 0.41 [10.5]
TYP
DSC Part No. Description Thickness Other part numbers
0.59 [15.0]
DSCH039-M025.......... Metric thickness shim..... .25mm............ FSD 41260-51, ASH402, 56ZF28684-0 TYP

DSCH039-M050.......... Metric thickness shim..... .50mm............ FSD 41260-52, ASH405, 56ZF28684-1 2.48 [63.0]
DSCH039-M100.......... Metric thickness shim..... 1.00mm.......... FSD 41260-53, ASH410, 56ZF28684-2
DSCH039-M200.......... Metric thickness shim..... 2.00mm..........FSD 41260-54, ASH420, 56ZF28684-3

0.25mm and 2.00mm unfinished 0.98 [25.0]
0.50mm yellow dichromate
1.00mm black oxide 0.49 [12.5]

DSCH039 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH039-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm 0.35 [9.0]

DSCH039-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm

DSCH039-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm

DSCH039-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH039-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH040 Series - Individual Shims 0.41 [10.5] 0.59 [15.0]
TYP TYP
DSC Part No. Description Thickness Other part numbers
0.35 [9.0] 0.98 [25.0]
DSCH040-M025.......... Metric thickness shim..... .25mm............ ASH502 3.07 [78.0]
DSCH040-M050.......... Metric thickness shim..... .50mm............ ASH505
DSCH040-M100.......... Metric thickness shim..... 1.00mm.......... ASH510
DSCH040-M200.......... Metric thickness shim..... 2.00mm.......... ASH520

0.25mm and 2.00mm unfinished 0.49 [12.5]
0.50mm yellow dichromate
DSCH040 Series - Shim Sets 1.00mm black oxide

DSC Part No. Description Thickness Set includes

DSCH040-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm

DSCH040-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH040-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH040-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH040-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342
http://dougstampco.com [email protected]

Page 14 2015

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

0.41 [10.4] TYP

DSCH041 Series - Individual Shims

DSC Part No. Description Thickness Other part numbers

DSCH041-M025.......... Metric thickness shim..... .25mm............ 56ZF28683-0 0.98 [25.0]
DSCH041-M050.......... Metric thickness shim..... .50mm............ 56ZF28683-1
DSCH041-M100.......... Metric thickness shim..... 1.00mm.......... 56ZF28683-2
DSCH041-M200.......... Metric thickness shim..... 2.00mm.......... 56ZF28683-3

DSCH041 Series - Shim Sets 0.49 [12.5]

DSC Part No. Description Thickness Set includes

DSCH041-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm 0.37 [9.5] 0.98 [25.0]
DSCH041-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm 1.77 [45.0]
DSCH041-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH041-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH041-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH042 Series - Individual Shims 2.76 [70.0]
0.41 [10.4] TYP
DSC Part No. Description Thickness Other part numbers
0.98 [25.0]
DSCH042-M025.......... Metric thickness shim..... .25mm............ 56ZF28685-0 TYP
DSCH042-M050.......... Metric thickness shim..... .50mm............ 56ZF28685-1
DSCH042-M100.......... Metric thickness shim..... 1.00mm.......... 56ZF28685-2
DSCH042-M200.......... Metric thickness shim..... 2.00mm.......... 56ZF28685-3

DSCH042 Series - Shim Sets 0.98 [25.0]
0.49 [12.5]
DSC Part No. Description Thickness Set includes 0.39 [10.0]

DSCH042-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH042-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH042-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH042-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH042-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH043 Series - Individual Shims 2.21 [56.0]
0.41 [10.4] TYP
DSC Part No. Description Thickness Other part numbers

DSCH043-M025.......... Metric thickness shim..... .25mm............ 56ZF28686-0
DSCH043-M050.......... Metric thickness shim..... .50mm............ 56ZF28686-1
DSCH043-M100.......... Metric thickness shim..... 1.00mm.......... 56ZF28686-2
DSCH043-M200.......... Metric thickness shim..... 2.00mm.......... 56ZF28686-3

DSCH043 Series - Shim Sets 0.98 [25.0]
0.49 [12.5]
DSC Part No. Description Thickness Set includes
0.39 [10.0]
DSCH043-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm 0.71 [18.0] TYP
DSCH043-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH043-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH043-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH043-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH044 Series - Individual Shims 4.33 [110.0]
0.42 [10.6] TYP
DSC Part No. Description Thickness Other part numbers

DSCH044-M025.......... Metric thickness shim..... .25mm............ ACH602
DSCH044-M050.......... Metric thickness shim..... .50mm............ ACH605
DSCH044-M100.......... Metric thickness shim..... 1.00mm.......... ACH610
DSCH044-M200.......... Metric thickness shim..... 2.00mm.......... ACH620

DSCH044 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH044-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH044-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH044-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH044-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH044-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

4.33 [110.0]

0.79 [20.0]

0.79 [20.0] 2.76 [70.0]

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 15 2015

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

0.42 [10.6]
TYP

DSCH045 Series - Individual Shims

DSC Part No. Description Thickness Other part numbers

DSCH045-M025.......... Metric thickness shim..... .25mm............ ASH602 1.97 [50.0]
DSCH045-M050.......... Metric thickness shim..... .50mm............ ASH605
DSCH045-M100.......... Metric thickness shim..... 1.00mm.......... ASH610
DSCH045-M200.......... Metric thickness shim..... 2.00mm.......... ASH620

DSCH045 Series - Shim Sets 0.39 [10.0]

DSC Part No. Description Thickness Set includes

DSCH045-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm 0.35 [9.0] 1.77 [45.0]
DSCH045-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm 2.48 [63.0]
DSCH045-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH045-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH045-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH046 Series - Individual Shims

DSC Part No. Description Thickness Other part numbers 1.34 [34.0]
0.34 [8.5]
DSCH046-M025.......... Metric thickness shim..... .25mm............ ASH302S TYP
DSCH046-M050.......... Metric thickness shim..... .50mm............ ASH305S
DSCH046-M100.......... Metric thickness shim..... 1.00mm.......... ASH310S 0.39 [10.0]
DSCH046-M200.......... Metric thickness shim..... 2.00mm.......... ASH320S 0.39 [10.0] TYP

DSCH046 Series - Shim Sets 0.25mm and 2.00mm unfinished
0.50mm yellow dichromate
1.00mm black oxide

0.79 [20.0]

DSC Part No. Description Thickness Set includes

DSCH046-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm 0.28 [7.0]
DSCH046-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH046-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH046-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH046-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH047 Series - Individual Shims

DSC Part No. Description Thickness Other part numbers 1.73 [44.0]
0.34 [8.5]
DSCH047-M025.......... Metric thickness shim..... .25mm............ ASH402S
DSCH047-M050.......... Metric thickness shim..... .50mm............ ASH405S TYP
DSCH047-M100.......... Metric thickness shim..... 1.00mm.......... ASH410S
DSCH047-M200.......... Metric thickness shim..... 2.00mm.......... ASH420S 0.39 [10.0]
0.39 [10.0] TYP
DSCH047 Series - Shim Sets 0.25mm and 2.00mm unfinished 0.28 [7.0]
0.50mm yellow dichromate
1.00mm black oxide 0.34 [8.5]

0.79 [20.0] 1.34 [34.0]

DSC Part No. Description Thickness Set includes

DSCH047-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm

DSCH047-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm

DSCH047-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm

DSCH047-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH047-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm 0.28 [7.0]

DSCH048 Series - Individual Shims

DSC Part No. Description Thickness Other part numbers

DSCH048-M025.......... Metric thickness shim..... .25mm............ DSC302S
DSCH048-M050.......... Metric thickness shim..... .50mm............ DSC305S
DSCH048-M100.......... Metric thickness shim..... 1.00mm.......... DSC310S
DSCH048-M200.......... Metric thickness shim..... 2.00mm..........DSC320S

0.79 [20.0]

DSCH048 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH048-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH048-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH048-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH048-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH048-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 16 2015

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

DSCH049 Series - Individual Shims

DSC Part No. Description Thickness Other part numbers 0.28 [7.0]
1.73 [44.0]
DSCH049-M025.......... Metric thickness shim..... .25mm............ DSC402S, ASH102N
DSCH049-M050.......... Metric thickness shim..... .50mm............ DSC405S, ASH105N
DSCH049-M100.......... Metric thickness shim..... 1.00mm.......... DSC410S, ASH110N
DSCH049-M200.......... Metric thickness shim..... 2.00mm..........DSC420S, ASH120N

0.79 [20.0] 0.34 [8.5]

DSCH049 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH049-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH049-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm

DSCH049-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH049-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH049-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH050 Series - Individual Shims

DSC Part No. Description Thickness Other part numbers 0.35 [9.0]
TYP
DSCH050-M025.......... Metric thickness shim..... .25mm............ ASH302N
DSCH050-M050.......... Metric thickness shim..... .50mm............ ASH305N 0.39 [10.0]
DSCH050-M100.......... Metric thickness shim..... 1.00mm.......... ASH310N
DSCH050-M200.......... Metric thickness shim..... 2.00mm.......... ASH320N 0.59 [15.0]
TYP
0.25mm and 2.00mm unfinished 0.79 [20.0]
0.50mm yellow dichromate 1.81 [46.0]
DSCH050 Series - Shim Sets 1.00mm black oxide

DSC Part No. Description Thickness Set includes

DSCH050-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm 0.31 [8.0]
DSCH050-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH050-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH050-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH050-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH051 Series - Individual Shims

DSC Part No. Description Thickness Other part numbers 0.35 [9.0]
TYP
DSCH051-M025.......... Metric thickness shim..... .25mm............ ASH402N
DSCH051-M050.......... Metric thickness shim..... .50mm............ ASH405N 0.59 [15.0]
DSCH051-M100.......... Metric thickness shim..... 1.00mm.......... ASH410N TYP
DSCH051-M200.......... Metric thickness shim..... 2.00mm.......... ASH420N
2.40 [61.0]
0.25mm and 2.00mm unfinished 0.79 [20.0]
0.50mm yellow dichromate
DSCH051 Series - Shim Sets 1.00mm black oxide 0.39 [10.0]
0.32 [8.0]
DSC Part No. Description Thickness Set includes

DSCH051-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm 0.32 [8.0]

DSCH051-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH051-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH051-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH051-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH052 Series - Individual Shims 0.35 [9.0]
TYP
DSC Part No. Description Thickness Other part numbers
1.57 [40.0]
DSCH052-M025.......... Metric thickness shim..... .25mm............ DSC602S 2.13 [54.0]
DSCH052-M050.......... Metric thickness shim..... .50mm............ DSC605S
DSCH052-M100.......... Metric thickness shim..... 1.00mm.......... DSC610S
DSCH052-M200.......... Metric thickness shim..... 2.00mm..........DSC620S

DSCH052 Series - Shim Sets 1.42 [36.0]
0.28 [7.0]
DSC Part No. Description Thickness Set includes

DSCH052-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH052-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH052-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH052-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH052-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 17 2015

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

DSCH053 Series - Individual Shims 0.43 [11.0]
TYP
DSC Part No. Description Thickness Other part numbers

DSCH053-M100.......... Metric thickness shim..... 1.00mm.......... DSC50081-1
DSCH053-M200.......... Metric thickness shim..... 2.00mm..........DSC50081-2

DSCH053 Series - Shim Sets 0.98 [25.0] 0.51 [13.0]
0.39 [10.0]
DSC Part No. Description Thickness Set includes

DSCH053-M503........... Three piece metric shim set.... 5.00mm.......... (2) 2.00mm, (1) 1.00mm 1.18 [30.0]
1.97 [50.0]

DSCH054 Series - Individual Shims 0.43 [11.0]
TYP
DSC Part No. Description Thickness Other part numbers
1.97 [50.0]
DSCH054-M100.......... Metric thickness shim..... 1.00mm.......... DSC50082-1 2.76 [70.0]
DSCH054-M200.......... Metric thickness shim..... 2.00mm..........DSC50082-2

0.98 [25.0] 0.51 [13.0]
0.39 [10.0]
DSCH054 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH054-M503........... Three piece metric shim set.... 5.00mm.......... (2) 2.00mm, (1) 1.00mm

DSCH055 Series - Individual Shims 0.63 [16.0]

DSC Part No. Description Thickness Other part numbers

DSCH055-M100.......... Metric thickness shim..... 1.00mm.......... DSC50083-1
DSCH055-M200.......... Metric thickness shim..... 2.00mm..........DSC50083-2

1.97 [50.0]

DSCH055 Series - Shim Sets 0.98 [25.0]

DSC Part No. Description Thickness Set includes

DSCH055-M503........... Three piece metric shim set.... 5.00mm.......... (2) 2.00mm, (1) 1.00mm 2.99 [76.0]

DSCH056 Series - Individual Shims

DSC Part No. Description Thickness Other part numbers 0.63 [16.0]
TYP
DSCH056-M100.......... Metric thickness shim..... 1.00mm.......... DSC50084-1
DSCH056-M200.......... Metric thickness shim..... 2.00mm..........DSC50084-2

DSCH056 Series - Shim Sets 1.97 [50.0] 0.98 [25.0]
1.38 [35.0]
DSC Part No. Description Thickness Set includes 2015

DSCH056-M503........... Three piece metric shim set.... 5.00mm.......... (2) 2.00mm, (1) 1.00mm

1.77 [45.0]
4.53 [115.0]

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 18

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

DSCH057 Series - Individual Shims 0.34 [8.6]

DSC Part No. Description Thickness Other part numbers

DSCH057-M025.......... Metric thickness shim..... .25mm............ GSD-A-25
DSCH057-M050.......... Metric thickness shim..... .50mm............ GSD-A-50
DSCH057-M100.......... Metric thickness shim..... 1.00mm.......... GSD-A-1
DSCH057-M200.......... Metric thickness shim..... 2.00mm.......... GSD-A-2

0.75 [19.1]

0.38 [9.5]

DSCH057 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH057-M454........... Four piece metric shim set...... 4.50mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm 0.75 [19.1]
DSCH057-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH057-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH057-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH057-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH058 Series - Individual Shims 0.34 [8.6] TYP

DSC Part No. Description Thickness Other part numbers 0.50 [12.7]
0.75 [19.1]
DSCH058-M025.......... Metric thickness shim..... .25mm............ GSD-C-25
DSCH058-M050.......... Metric thickness shim..... .50mm............ GSD-C-50 1.50 [38.1]
DSCH058-M100.......... Metric thickness shim..... 1.00mm.......... GSD-C-1
DSCH058-M200.......... Metric thickness shim..... 2.00mm.......... GSD-C-2

DSCH058 Series - Shim Sets 1.00 [25.4]
0.38 [9.5]
DSC Part No. Description Thickness Set includes

DSCH058-M454........... Four piece metric shim set...... 4.50mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH058-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH058-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH058-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH058-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH059 Series - Individual Shims 0.41 [10.4]
TYP
DSC Part No. Description Thickness Other part numbers

DSCH059-M025.......... Metric thickness shim..... .25mm............ GSD-E-25
DSCH059-M050.......... Metric thickness shim..... .50mm............ GSD-E-50
DSCH059-M100.......... Metric thickness shim..... 1.00mm.......... GSD-E-1
DSCH059-M200.......... Metric thickness shim..... 2.00mm.......... GSD-E-2

1.00 [25.4]

DSCH059 Series - Shim Sets 0.50 [12.7]
0.50 [12.7]
DSC Part No. Description Thickness Set includes 0.50 [12.7] 0.75 [19.1]
2.50 [63.5] 2015
DSCH059-M454........... Four piece metric shim set...... 4.50mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH059-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH059-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH059-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH059-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH060 Series - Individual Shims

DSC Part No. Description Thickness Other part numbers 0.56 [14.2]
TYP
DSCH060-M025.......... Metric thickness shim..... .25mm............ GSD-F-25
DSCH060-M050.......... Metric thickness shim..... .50mm............ GSD-F-50 1.00 [25.4]
DSCH060-M100.......... Metric thickness shim..... 1.00mm.......... GSD-F-1 TYP
DSCH060-M200.......... Metric thickness shim..... 2.00mm.......... GSD-F-2 3.00 [76.2]

1.00 [25.4]

DSCH060 Series - Shim Sets

DSC Part No. Description Thickness Set includes 0.50 [12.7]

DSCH060-M454........... Four piece metric shim set...... 4.50mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm

DSCH060-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm

DSCH060-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm

DSCH060-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH060-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 19

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

DSCH061 Series - Individual Shims 0.56 [14.2]
TYP
DSC Part No. Description Thickness Other part numbers
1.00 [25.4]
DSCH061-M025.......... Metric thickness shim..... .25mm............ GSD-G-25 1.00 [25.4] TYP
DSCH061-M050.......... Metric thickness shim..... .50mm............ GSD-G-50 4.00 [101.6]
DSCH061-M100.......... Metric thickness shim..... 1.00mm.......... GSD-G-1
DSCH061-M200.......... Metric thickness shim..... 2.00mm.......... GSD-G-2 0.56 [14.2]
TYP
0.50 [12.7]
1.00 [25.4] TYP
DSCH061 Series - Shim Sets 0.50 [12.7] 5.00 [127.0]

DSC Part No. Description Thickness Set includes

DSCH061-M454........... Four piece metric shim set...... 4.50mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH061-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH061-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH061-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH061-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH062 Series - Individual Shims

DSC Part No. Description Thickness Other part numbers

DSCH062-M025.......... Metric thickness shim..... .25mm............ GSD-H-25 1.00 [25.4]
DSCH062-M050.......... Metric thickness shim..... .50mm............ GSD-H-50
DSCH062-M100.......... Metric thickness shim..... 1.00mm.......... GSD-H-1
DSCH062-M200.......... Metric thickness shim..... 2.00mm.......... GSD-H-2

0.50 [12.7]

DSCH062 Series - Shim Sets 0.50 [12.7]

DSC Part No. Description Thickness Set includes

DSCH062-M454........... Four piece metric shim set...... 4.50mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH062-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH062-M506........... Six piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH062-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH062-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

Note regarding NAAMS Standard Components

While Douglas Stamping Company has always specialized in providing high quality shims,
spacers and washers to a wide range of industry and end users, we also provide a variety
of details and components used in automated welding machines and production equipment.

Most of these items are not cataloged, as they are part of readily available industrial
standards. For specific part numbers and engineering information, please visit
http://naamssstandards.org. We provide all of the shims, spacers, washers, L-blocks, stop
blocks, locating pins and retainers listed, most of the stub shafts, and many other
components. Please contact us for price and availablity. Examples of many of these items
can be found on pages 63 and 64.

We also continue to provide obsolete FSD, Ford, Chrysler, GM and other industrial
standard shims, spacers, L-blocks, stop blocks, locating pins, retainers and stub shafts, and
are capable of producing special and custom components to print using traditional stamping
methods and in-house laser cutting.

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 20 2015

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

DSCH063 Series - Individual Shims
DSC Part No.
Description Thickness Other part numbers

DSCH063-M025.......... Metric thickness shim..... .25mm............ M FS 15-AAAA 0.34 [8.6] 0.75 [19.1]

DSCH063-M050.......... Metric thickness shim..... .50mm............ M FS 15-AAA

DSCH063-M100.......... Metric thickness shim..... 1.00mm.......... M FS 15-AA
DSCH063-M200.......... Metric thickness shim..... 2.00mm.......... M FS 15-A
DSCH063-E015.......... Inch thickness shim........ .015 inch........ FS 15-AAA
DSCH063-E032.......... Inch thickness shim........ .031 inch........ FS 15-AA
DSCH063-E062.......... Inch thickness shim........ .062 inch........ FS 15-A

DSCH063 Series - Shim Sets
DSC Part No.
Description Thickness Set includes

DSCH063-M454........... Four piece metric shim set...... 4.50mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH063-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH063-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH063-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH063-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH063-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 inch

DSCH064 Series - Individual Shims 0.34 [8.6] 0.28 [7.1]
DSC Part No. 0.63 [16.0]
Description Thickness Other part numbers 0.31 [7.9]
0.45 [11.4]
DSCH064-M025.......... Metric thickness shim..... .25mm............ M FS 15-BBBB

DSCH064-M050.......... Metric thickness shim..... .50mm............ M FS 15-BBB

DSCH064-M100.......... Metric thickness shim..... 1.00mm.......... M FS 15-BB
DSCH064-M200.......... Metric thickness shim..... 2.00mm.......... M FS 15-B
DSCH064-E015.......... Inch thickness shim........ .015 inch........ FS 15-BBB
DSCH064-E032.......... Inch thickness shim........ .031 inch........ FS 15-BB
DSCH064-E062.......... Inch thickness shim........ .062 inch........ FS 15-B

DSCH064 Series - Shim Sets
DSC Part No.
Description Thickness Set includes

DSCH064-M454........... Four piece metric shim set...... 4.50mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm 0.30 [7.6]

DSCH064-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm 1.00 [25.4]
DSCH064-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH064-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH064-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH064-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 inch

DSCH065 Series - Individual Shims 0.34 [8.6] 0.28 [7.1]
DSC Part No. 1.00 [25.4]
Description Thickness Other part numbers 0.30 [7.6] 0.50 [12.6]
0.45 [11.4]
DSCH065-M025.......... Metric thickness shim..... .25mm............ M FS 15-CCCC 1.00 [25.4]

DSCH065-M050.......... Metric thickness shim..... .50mm............ M FS 15-CCC

DSCH065-M100.......... Metric thickness shim..... 1.00mm.......... M FS 15-CC
DSCH065-M200.......... Metric thickness shim..... 2.00mm.......... M FS 15-C
DSCH065-E015.......... Inch thickness shim........ .015 inch........ FS 15-CCC
DSCH065-E032.......... Inch thickness shim........ .031 inch........ FS 15-CC
DSCH065-E062.......... Inch thickness shim........ .062 inch........ FS 15-C

DSCH065 Series - Shim Sets
DSC Part No.
Description Thickness Set includes

DSCH065-M454........... Four piece metric shim set...... 4.50mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm

DSCH065-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH065-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH065-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH065-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH065-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 inch

DSCH066 Series - Individual Shims 0.34 [8.6] 0.28 [7.1]
DSC Part No. 0.24 [6.0]
Description Thickness Other part numbers 1.00 [25.4]
0.50 [12.6] 0.45 [11.4]
DSCH066-M025.......... Metric thickness shim..... .25mm............ M FS 15-DDDD

DSCH066-M050.......... Metric thickness shim..... .50mm............ M FS 15-DDD

DSCH066-M100.......... Metric thickness shim..... 1.00mm.......... M FS 15-DD
DSCH066-M200.......... Metric thickness shim..... 2.00mm.......... M FS 15-D
DSCH066-E015.......... Inch thickness shim........ .015 inch........ FS 15-DDD
DSCH066-E032.......... Inch thickness shim........ .031 inch........ FS 15-DD
DSCH066-E062.......... Inch thickness shim........ .062 inch........ FS 15-D

DSCH066 Series - Shim Sets
DSC Part No.
Description Thickness Set includes

DSCH066-M454........... Four piece metric shim set...... 4.50mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm 0.30 [7.6]

DSCH066-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm 1.00 [25.4]
DSCH066-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH066-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH066-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH066-E255............ Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 inch

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342
http://dougstampco.com [email protected]

Page 21 2014

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

0.28 [7.1] 0.34 [8.6]

DSCH067 Series - Individual Shims
DSC Part No.
Description Thickness Other part numbers

DSCH067-M025.......... Metric thickness shim..... .25mm............ M FS 15-EEEE 1.00 [25.4] 0.50 [12.6]
0.24 [6.0]
DSCH067-M050.......... Metric thickness shim..... .50mm............ M FS 15-EEE

DSCH067-M100.......... Metric thickness shim..... 1.00mm.......... M FS 15-EE
DSCH067-M200.......... Metric thickness shim..... 2.00mm.......... M FS 15-E
DSCH067-E015.......... Inch thickness shim........ .015 inch........ FS 15-EEE
DSCH067-E032.......... Inch thickness shim........ .031 inch........ FS 15-EE
DSCH067-E062.......... Inch thickness shim........ .062 inch........ FS 15-E

DSCH067 Series - Shim Sets 0.25 [6.4] 0.45 [11.4]
DSC Part No.
Description Thickness Set includes

DSCH067-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm 1.38 [34.9]
DSCH067-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH067-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm

DSCH067-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH067-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH067-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 inch

DSCH068 Series - Individual Shims 0.28 [7.1] TYP (2) 0.34 [8.6]
0.50 [12.7]
DSC Part No. Description Thickness Other part numbers

DSCH068-M025.......... Metric thickness shim..... .25mm............ M FS 15-FFFF 1.00 [25.4]

DSCH068-M050.......... Metric thickness shim..... .50mm............ M FS 15-FFF

DSCH068-M100.......... Metric thickness shim..... 1.00mm.......... M FS 15-FF
DSCH068-M200.......... Metric thickness shim..... 2.00mm.......... M FS 15-F
DSCH068-E015.......... Inch thickness shim........ .015 inch........ FS 15-FFF
DSCH068-E032.......... Inch thickness shim........ .031 inch........ FS 15-FF
DSCH068-E062.......... Inch thickness shim........ .062 inch........ FS 15-F

DSCH068 Series - Shim Sets
DSC Part No.
Description Thickness Set includes 0.45 [11.4]
TYP
DSCH068-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm 0.24 [6.0]
0.34 [8.6]
DSCH068-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm 1.38 [34.9] TYP (2)
DSCH068-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH068-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH068-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH068-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 inch

DSCH069 Series - Individual Shims 0.28 [7.1]
DSC Part No. TYP (2)
Description Thickness Other part numbers
1.00 [25.4]
DSCH069-M025.......... Metric thickness shim..... .25mm............ M FS 15-GGGG
0.50 [12.7]
DSCH069-M050.......... Metric thickness shim..... .50mm............ M FS 15-GGG
0.45 [11.4]
DSCH069-M100.......... Metric thickness shim..... 1.00mm.......... M FS 15-GG TYP
DSCH069-M200.......... Metric thickness shim..... 2.00mm.......... M FS 15-G
DSCH069-E015.......... Inch thickness shim........ .015 inch........ FS 15-GGG 1.88 [47.8]
DSCH069-E032.......... Inch thickness shim........ .031 inch........ FS 15-GG
DSCH069-E062.......... Inch thickness shim........ .062 inch........ FS 15-G 1.88 [47.8]

DSCH069 Series - Shim Sets
DSC Part No.
Description Thickness Set includes

DSCH069-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm 0.24 [6.1]
DSCH069-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm

DSCH069-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm

DSCH069-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH069-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH069-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 inch

DSCH070 Series - Individual Shims
DSC Part No.
Description Thickness Other part numbers 0.34 [8.6] TYP
1.00 [25.4]
DSCH070-M025.......... Metric thickness shim..... .25mm............ M FS 15-HHHH, GSD-D-25

DSCH070-M050.......... Metric thickness shim..... .50mm............ M FS 15-HHH, GSD-D-50

DSCH070-M100.......... Metric thickness shim..... 1.00mm.......... M FS 15-HH, GSD-D-1
DSCH070-M200.......... Metric thickness shim..... 2.00mm.......... M FS 15-H, GSD-D-2
DSCH070-E015.......... Inch thickness shim........ .015 inch........ FS 15-HHH
DSCH070-E032.......... Inch thickness shim........ .031 inch........ FS 15-HH
DSCH070-E062.......... Inch thickness shim........ .062 inch........ FS 15-H

DSCH070 Series - Shim Sets 0.50 [12.7]
DSC Part No.
Description Thickness Set includes 0.50 [12.7]
TYP
DSCH070-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm 0.44 [11.2]
DSCH070-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm

DSCH070-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm

DSCH070-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH070-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH070-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 inch

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342
http://dougstampco.com [email protected]

Page 22 2014

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

0.28 [7.1] TYP (2) 0.34 [8.6]
0.38 [9.7]
DSCH071 Series - Individual Shims
DSC Part No.
Description Thickness Other part numbers

DSCH071-M025.......... Metric thickness shim..... .25mm............ M FS 15-JJJJ 0.75 [19.1]

DSCH071-M050.......... Metric thickness shim..... .50mm............ M FS 15-JJJ

DSCH071-M100.......... Metric thickness shim..... 1.00mm.......... M FS 15-JJ

DSCH071-M200.......... Metric thickness shim..... 2.00mm.......... M FS 15-J
DSCH071-E015.......... Inch thickness shim........ .015 inch........ FS 15-JJJ
DSCH071-E032.......... Inch thickness shim........ .031 inch........ FS 15-JJ
DSCH071-E062.......... Inch thickness shim........ .062 inch........ FS 15-J

DSCH071 Series - Shim Sets 0.45 [11.4]
DSC Part No. TYP
Description Thickness Set includes 0.24 [6.1]

DSCH071-M454........... Four piece metric shim set...... 4.50mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm

DSCH071-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm 1.38 [35.1]

DSCH071-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm

DSCH071-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH071-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH071-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 inch

DSCH072 Series - Individual Shims 0.34 [8.6]
DSC Part No. TYP (2)
Description Thickness Other part numbers 0.28 [7.1] TYP (2)
0.75 [19.1] 0.38 [9.7]
DSCH072-M025.......... Metric thickness shim..... .25mm............ M FS 15-KKKK 0.45 [11.4]

DSCH072-M050.......... Metric thickness shim..... .50mm............ M FS 15-KKK TYP
1.88 [47.8]
DSCH072-M100.......... Metric thickness shim..... 1.00mm.......... M FS 15-KK
DSCH072-M200.......... Metric thickness shim..... 2.00mm.......... M FS 15-K
DSCH072-E015.......... Inch thickness shim........ .015 inch........ FS 15-KKK
DSCH072-E032.......... Inch thickness shim........ .031 inch........ FS 15-KK
DSCH072-E062.......... Inch thickness shim........ .062 inch........ FS 15-K

DSCH072 Series - Shim Sets 0.24 [6.1]
DSC Part No.
Description Thickness Set includes

DSCH072-M454........... Four piece metric shim set...... 4.50mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm

DSCH072-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm

DSCH072-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm

DSCH072-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH072-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH072-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 inch

DSCH073 Series - Individual Shims 0.34 [8.6] 0.28 [7.1]
DSC Part No. TYP (2) 0.75 [19.1]
Description Thickness Other part numbers
0.38 [9.7]
DSCH073-M025.......... Metric thickness shim..... .25mm............ M FS 15-LLLL

DSCH073-M050.......... Metric thickness shim..... .50mm............ M FS 15-LLL

DSCH073-M100.......... Metric thickness shim..... 1.00mm.......... M FS 15-LL
DSCH073-M200.......... Metric thickness shim..... 2.00mm.......... M FS 15-L
DSCH073-E015.......... Inch thickness shim........ .015 inch........ FS 15-LLL
DSCH073-E032.......... Inch thickness shim........ .031 inch........ FS 15-LL
DSCH073-E062.......... Inch thickness shim........ .062 inch........ FS 15-L

DSCH073 Series - Shim Sets
DSC Part No.
Description Thickness Set includes 0.45 [11.4]
TYP
DSCH073-M454........... Four piece metric shim set...... 4.50mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm 0.30 [7.6]
DSCH073-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm

DSCH073-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm 1.50 [38.1]

DSCH073-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH073-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH073-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 inch

DSCH074 Series - Individual Shims 1.50 [38.1] 0.28 [7.1]

DSC Part No. Description Thickness Other part numbers

DSCH074-M025.......... Metric thickness shim..... .25mm............ M FS 15-MMMM 0.34 [8.6]TYP (2)

DSCH074-M050.......... Metric thickness shim..... .50mm............ M FS 15-MMM 1.00 [25.4]

DSCH074-M100.......... Metric thickness shim..... 1.00mm.......... M FS 15-MM 0.45 [11.4]
DSCH074-M200.......... Metric thickness shim..... 2.00mm.......... M FS 15-M TYP
DSCH074-E015.......... Inch thickness shim........ .015 inch........ FS 15-MMM
DSCH074-E032.......... Inch thickness shim........ .031 inch........ FS 15-MM
DSCH074-E062.......... Inch thickness shim........ .062 inch........ FS 15-M

DSCH074 Series - Shim Sets 0.50 [12.7]
DSC Part No.
Description Thickness Set includes

DSCH074-M454........... Four piece metric shim set...... 4.50mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm

DSCH074-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm

DSCH074-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm

DSCH074-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH074-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm 0.30 [7.6]
DSCH074-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 inch

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342
http://dougstampco.com [email protected]

Page 23 2014

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

DSCH075 Series - Individual Shims 0.34 [8.6]
1.38 [35.1]
DSC Part No. Description Thickness Other part numbers

DSCH075-M025.......... Metric thickness shim..... .25mm............ M FS 15-NNNN

DSCH075-M050.......... Metric thickness shim..... .50mm............ M FS 15-NNN

DSCH075-M100.......... Metric thickness shim..... 1.00mm.......... M FS 15-NN
DSCH075-M200.......... Metric thickness shim..... 2.00mm..........M FS 15-N
DSCH075-E015.......... Inch thickness shim........ .015 inch........ FS 15-NNN
DSCH075-E032.......... Inch thickness shim........ .031 inch........ FS 15-NN
DSCH075-E062.......... Inch thickness shim........ .062 inch........ FS 15-N

DSCH075 Series - Shim Sets 0.69 [17.5]

DSC Part No. Description Thickness Set includes 0.75 [19.1]
0.34 [8.6]
DSCH075-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH075-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm TYP

DSCH075-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm 0.50 [12.7]
DSCH075-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm 0.50 [12.7]
DSCH075-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH075-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 inch TYP
2.75 [69.9]
DSCH076 Series - Individual Shims
1.25 [31.8]
DSC Part No. Description Thickness Other part numbers
0.75 [19.1]
DSCH076-M025.......... Metric thickness shim..... .25mm............ M FS 15-PPPP 1.25 [31.8] 1.38 [34.9]

DSCH076-M050.......... Metric thickness shim..... .50mm............ M FS 15-PPP
DSCH076-M100.......... Metric thickness shim..... 1.00mm.......... M FS 15-PP
DSCH076-M200.......... Metric thickness shim..... 2.00mm..........M FS 15-P
DSCH076-E015.......... Inch thickness shim........ .015 inch........ FS 15-PPP
DSCH076-E032.......... Inch thickness shim........ .031 inch........ FS 15-PP
DSCH076-E062.......... Inch thickness shim........ .062 inch........ FS 15-P

DSCH076 Series - Shim Sets 0.38 [9.5]

DSC Part No. Description Thickness Set includes

DSCH076-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH076-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH076-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH076-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH076-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH076-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 inch

DSCH077 Series - Individual Shims 0.34 [8.6]
TYP
DSC Part No. Description Thickness Other part numbers
0.38 [9.5]
DSCH077-M025.......... Metric thickness shim..... .25mm............ M FS 15-RRRR

DSCH077-M050.......... Metric thickness shim..... .50mm............ M FS 15-RRR

DSCH077-M100.......... Metric thickness shim..... 1.00mm.......... M FS 15-RR
DSCH077-M200.......... Metric thickness shim..... 2.00mm..........M FS 15-R
DSCH077-E015.......... Inch thickness shim........ .015 inch........ FS 15-RRR
DSCH077-E032.......... Inch thickness shim........ .031 inch........ FS 15-RR
DSCH077-E062.......... Inch thickness shim........ .062 inch........ FS 15-R

DSCH077 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH077-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm 0.31 [7.9]
DSCH077-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH077-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH077-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH077-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH077-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 inch

DSCH078 Series - Individual Shims 1.75 [44.5]

DSC Part No. Description Thickness Other part numbers 0.34 [8.6] TYP 0.38 [9.5]
1.25 [31.8] 0.50 [12.7] TYP
DSCH078-M025.......... Metric thickness shim..... .25mm............ M FS 15-TTTT

DSCH078-M050.......... Metric thickness shim..... .50mm............ M FS 15-TTT

DSCH078-M100.......... Metric thickness shim..... 1.00mm.......... M FS 15-TT
DSCH078-M200.......... Metric thickness shim..... 2.00mm..........M FS 15-T
DSCH078-E015.......... Inch thickness shim........ .015 inch........ FS 15-TTT
DSCH078-E032.......... Inch thickness shim........ .031 inch........ FS 15-TT
DSCH078-E062.......... Inch thickness shim........ .062 inch........ FS 15-T

DSCH078 Series - Shim Sets

DSC Part No. Description Thickness Set includes 0.38 [9.5]

DSCH078-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH078-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm

DSCH078-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH078-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH078-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH078-E255............ Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 inch

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 24 2015

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

DSCH079 Series - Individual Shims 0.34 [8.6] 1.00 [25.4]
TYP
DSC Part No. Description Thickness Other part numbers 0.28 [7.1]
1.00 [25.4] 0.45 [11.4]
DSCH079-M025.......... Metric thickness shim..... .25mm............ M FS 15-UUUU

DSCH079-M050.......... Metric thickness shim..... .50mm............ M FS 15-UUU

DSCH079-M100.......... Metric thickness shim..... 1.00mm.......... M FS 15-UU
DSCH079-M200.......... Metric thickness shim..... 2.00mm..........M FS 15-U
DSCH079-E015.......... Inch thickness shim........ .015 inch........ FS 15-UUU
DSCH079-E032.......... Inch thickness shim........ .031 inch........ FS 15-UU
DSCH079-E062.......... Inch thickness shim........ .062 inch........ FS 15-U

DSCH079 Series - Shim Sets

DSC Part No. Description Thickness Set includes 0.28 [7.0]

DSCH079-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm

DSCH079-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm

DSCH079-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm

DSCH079-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH079-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH079-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 inch

DSCH080 Series - Individual Shims 0.56 [14.2]
TYP
DSC Part No. Description Thickness Other part numbers
1.00 [25.4] TYP
DSCH080-M025.......... Metric thickness shim..... .25mm............ M FS 15-VVVV, GSD-J-25 6.00 [152.4]

DSCH080-M050.......... Metric thickness shim..... .50mm............ M FS 15-VVV, GSD-J-50

DSCH080-M100.......... Metric thickness shim..... 1.00mm.......... M FS 15-VV, GSD-J-1

DSCH080-M200.......... Metric thickness shim..... 2.00mm..........M FS 15-V, GSD-J-2 1.00 [25.4] 0.50 [12.7]
DSCH080-E015.......... Inch thickness shim........ .015 inch........ FS 15-VVV

DSCH080-E032.......... Inch thickness shim........ .031 inch........ FS 15-VV

DSCH080-E062.......... Inch thickness shim........ .062 inch........ FS 15-V

DSCH080 Series - Shim Sets 0.50 [12.7]

DSC Part No. Description Thickness Set includes

DSCH080-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm
DSCH080-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH080-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm
DSCH080-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
DSCH080-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm
DSCH080-E255............ Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 inch

DSCH081 Series - Individual Shims 3.00 [76.2]

DSC Part No. Description Thickness Other part numbers 0.56 [14.2] TYP
2.00 [50.8]
DSCH081-M025.......... Metric thickness shim..... .25mm............ M FS 15-WWWW, GSD-K-25

DSCH081-M050.......... Metric thickness shim..... .50mm............ M FS 15-WWW, GSD-K-50
DSCH081-M100.......... Metric thickness shim..... 1.00mm.......... M FS 15-WW, GSD-K-1
DSCH081-M200.......... Metric thickness shim..... 2.00mm..........M FS 15-W, GSD-K-2
DSCH081-E015.......... Inch thickness shim........ .015 inch........ FS 15-WWW
DSCH081-E032.......... Inch thickness shim........ .031 inch........ FS 15-WW
DSCH081-E062.......... Inch thickness shim........ .062 inch........ FS 15-W

DSCH081 Series - Shim Sets 0.50 [12.7]
1.00 [25.4] TYP
DSC Part No. Description Thickness Set includes 2.13 [54.0]

DSCH081-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm 0.50 [12.7]
DSCH081-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm

DSCH081-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm

DSCH081-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH081-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm

DSCH081-E255............Five piece inch shim set.......... .250 inch........ (3) .062 inch, (2) .031 inch

DSCH082 Series - Individual Shims 0.35 [9.0] TYP

DSC Part No. Description Thickness Other part numbers

DSCH082-M025.......... Metric thickness shim..... .25mm............ DSC302L
DSCH082-M050.......... Metric thickness shim..... .50mm............ DSC305L
DSCH082-M100.......... Metric thickness shim..... 1.00mm.......... DSC310L
DSCH082-M200.......... Metric thickness shim..... 2.00mm..........DSC320L

2.15 [54.5]

DSCH082 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH082-M454........... Four piece metric shim set...... 4.50mm..........(1) 2.00mm, (2) 1.00mm, (1) .50mm 0.43 [11.0]

DSCH082-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm 0.63 [16.0]
TYP
DSCH082-M506........... Six piece metric shim set......... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (1) .50mm, (2) .25mm

DSCH082-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH082-M605........... Five piece metric shim set....... 6.00mm.......... (2) 2.00mm, (1) 1.00mm, (2) .50mm 0.43 [11.0]

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 25

2015

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

DSCH083 Series - Individual Shims Ø0.56
[14.2]
DSC Part No. Description Thickness Other part numbers

DSCH083-E015.......... Inch thickness shim........ .015 inch........ CSS 33-3
DSCH083-E032.......... Inch thickness shim........ .031 inch........ CSS 33-1
DSCH083-E062.......... Inch thickness shim........ .062 inch........ CSS 33-2

0.75 [19.1]

DSCH083 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH083-E155............Five piece inch shim set.......... .150 inch........ (1) .062 inch, (2) .031 inch, (2) .015 inch 0.75 [19.1]
(This set also known as

42-530-2500)

DSCH084 Series - Individual Shims Ø0.44 [11.2] 1.25 [31.8]
TYP 0.75 [19.1]
DSC Part No. Description Thickness Other part numbers
0.50 [12.7]
DSCH084-E015.......... Inch thickness shim........ .015 inch........ CSS 35-3
DSCH084-E032.......... Inch thickness shim........ .031 inch........ CSS 35-1
DSCH084-E062.......... Inch thickness shim........ .062 inch........ CSS 35-2

DSCH084 Series - Shim Sets 0.38 [9.5]

DSC Part No. Description Thickness Set includes

DSCH084-E155............Five piece inch shim set.......... .150 inch........ (1) .062 inch, (2) .031 inch, (2) .015 inch
(This set also known as

42-530-2525)

DSCH085 Series - Individual Shims Ø0.44 [11.2]
TYP
DSC Part No. Description Thickness Other part numbers 1.75 [44.5]

DSCH085-E015.......... Inch thickness shim........ .015 inch........ CSS 37-3 0.75 [19.1]
DSCH085-E032.......... Inch thickness shim........ .031 inch........ CSS 37-1 0.50 [12.7]
DSCH085-E062.......... Inch thickness shim........ .062 inch........ CSS 37-2
TYP
DSCH085 Series - Shim Sets

DSC Part No. Description Thickness Set includes 0.38 [9.5]

DSCH085-E155............Five piece inch shim set.......... .150 inch........ (1) .062 inch, (2) .031 inch, (2) .015 inch
(This set also known as

42-530-2575)

DSCH086 Series - Individual Shims

DSC Part No. Description Thickness Other part numbers Ø0.44 [11.2]

DSCH086-E015.......... Inch thickness shim........ .015 inch........ CSS 44-3
DSCH086-E032.......... Inch thickness shim........ .031 inch........ CSS 44-1
DSCH086-E062.......... Inch thickness shim........ .062 inch........ CSS 44-2

1.00 [25.4]

DSCH086 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH086-E155............Five piece inch shim set.......... .150 inch........ (1) .062 inch, (2) .031 inch, (2) .015 inch 1.00 [25.4]
(This set also known as

42-530-2600)

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 26 2015

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

DSCH087 Series - Individual Shims Ø0.44 [11.2]
TYP
DSC Part No. Description Thickness Other part numbers

DSCH087-E015.......... Inch thickness shim........ .015 inch........ CSS 46-3 1.50 [38.1]
DSCH087-E032.......... Inch thickness shim........ .031 inch........ CSS 46-1
DSCH087-E062.......... Inch thickness shim........ .062 inch........ CSS 46-2

DSCH087 Series - Shim Sets 1.00 [25.4]
0.50 [12.7]
DSC Part No. Description Thickness Set includes

DSCH087-E155............Five piece inch shim set.......... .150 inch........ (1) .062 inch, (2) .031 inch, (2) .015 inch 0.50 [12.7]
(This set also known as

42-530-2625)

DSCH088 Series - Individual Shims

DSC Part No. Description Thickness Other part numbers 2.00 [50.8]

DSCH088-E015.......... Inch thickness shim........ .015 inch........ CSS 48-3 Ø0.44 [11.2]
DSCH088-E032.......... Inch thickness shim........ .031 inch........ CSS 48-1 TYP
DSCH088-E062.......... Inch thickness shim........ .062 inch........ CSS 48-2

DSCH088 Series - Shim Sets 1.00 [25.4]

DSC Part No. Description Thickness Set includes 0.50 [12.7]
TYP
DSCH088-E155............Five piece inch shim set.......... .150 inch........ (1) .062 inch, (2) .031 inch, (2) .015 inch

(This set also known as

42-530-2650) 0.50 [12.7]

DSCH089 Series - Individual Shims Ø0.44 [11.2] 1.50 [38.1]
TYP
DSC Part No. Description Thickness Other part numbers

DSCH089-E015.......... Inch thickness shim........ .015 inch........ CSS 66-3 0.75 [19.1]
DSCH089-E032.......... Inch thickness shim........ .031 inch........ CSS 66-1
DSCH089-E062.......... Inch thickness shim........ .062 inch........ CSS 66-2

1.50 [38.1]

DSCH089 Series - Shim Sets 0.38 [9.5]
0.75 [19.1]
DSC Part No. Description Thickness Set includes

DSCH089-E155............Five piece inch shim set.......... .150 inch........ (1) .062 inch, (2) .031 inch, (2) .015 inch 0.38 [9.5]
(This set also known as

42-530-2675)

DSCH090 Series - Individual Shims Ø0.44 [11.2] 2.00 [50.8]
TYP
DSC Part No. Description Thickness Other part numbers 2.00 [50.8]
1.24 [31.5]
DSCH090-E015.......... Inch thickness shim........ .015 inch........ CSS 88-3 0.63 [15.9]
DSCH090-E032.......... Inch thickness shim........ .031 inch........ CSS 88-1 TYP
DSCH090-E062.......... Inch thickness shim........ .062 inch........ CSS 88-2

DSCH090 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH090-E155............Five piece inch shim set.......... .150 inch........ (1) .062 inch, (2) .031 inch, (2) .015 inch 0.38 [9.5]
(This set also known as 0.38 [9.5]

42-530-2700)

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 27 2015

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

DSCH091 Series - Individual Shims Ø0.44 [11.2] Ø1.03 [26.2]
TYP (2)
DSC Part No. Description Thickness Other part numbers 0.81 [20.6]
TYP
DSCH091-E015.......... Inch thickness shim........ .015 inch........ CSS 89-3
DSCH091-E032.......... Inch thickness shim........ .031 inch........ CSS 89-1
DSCH091-E062.......... Inch thickness shim........ .062 inch........ CSS 89-2

DSCH091 Series - Shim Sets 2.00 [50.8] 1.00 [25.4]
1.13 [28.6]
DSC Part No. Description Thickness Set includes

DSCH091-E155............Five piece inch shim set.......... .150 inch........ (1) .062 inch, (2) .031 inch, (2) .015 inch
(This set also known as

42-530-2725)

DSCH092 Series - Individual Shims Ø0.56 [14.2] 2.25 [57.2] Ø0.75
TYP [19.1]
2.24 [56.9]
2.24 [56.9]
DSC Part No. Description Thickness Other part numbers 1.50 [38.1]

DSCH092-E015.......... Inch thickness shim........ .015 inch........ CSS 99-3
DSCH092-E032.......... Inch thickness shim........ .031 inch........ CSS 99-1
DSCH092-E062.......... Inch thickness shim........ .062 inch........ CSS 99-2

DSCH092 Series - Shim Sets 1.12 [28.4]
0.37 [9.4]
DSC Part No. Description Thickness Set includes
0.75 [19.1] TYP
DSCH092-E155............Five piece inch shim set.......... .150 inch........ (1) .062 inch, (2) .031 inch, (2) .015 inch 0.37 [9.4]
(This set also known as 2.50 [63.5]

42-530-2750)

1.12 [28.4]

DSCH093 Series - Individual Shims Ø0.44 [11.2]
TYP
DSC Part No. Description Thickness Other part numbers

DSCH093-E015.......... Inch thickness shim........ .015 inch........ CSS 410-3
DSCH093-E032.......... Inch thickness shim........ .031 inch........ CSS 410-1
DSCH093-E062.......... Inch thickness shim........ .062 inch........ CSS 410-2

1.00 [25.4]

DSCH093 Series - Shim Sets 0.50 [12.7]

DSC Part No. Description Thickness Set includes 0.50 [12.7]
TYP
DSCH093-E155............Five piece inch shim set.......... .150 inch........ (1) .062 inch, (2) .031 inch, (2) .015 inch
(This set also known as

42-530-2775)

DSCH094 Series - Individual Shims Ø0.44 [11.2]
TYP
DSC Part No. Description Thickness Other part numbers 3.00 [76.2]

DSCH094-E015.......... Inch thickness shim........ .015 inch........ CSS 412-3 1.00 [25.4]
DSCH094-E032.......... Inch thickness shim........ .031 inch........ CSS 412-1 TYP
DSCH094-E062.......... Inch thickness shim........ .062 inch........ CSS 412-2

1.00 [25.4]

DSCH094 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH094-E155............Five piece inch shim set.......... .150 inch........ (1) .062 inch, (2) .031 inch, (2) .015 inch

(This set also known as

42-530-2800) 0.50 [12.7]

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 28 2015

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

DSCH095 Series - Individual Shims Ø0.44 [11.2] 2.50 [63.5]
TYP
DSC Part No. Description Thickness Other part numbers 1.25 [31.8]

DSCH095-E015.......... Inch thickness shim........ .015 inch........ CSS 510-3 0.88 [22.2]
DSCH095-E032.......... Inch thickness shim........ .031 inch........ CSS 510-1 TYP
DSCH095-E062.......... Inch thickness shim........ .062 inch........ CSS 510-2

DSCH095 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH095-E155............Five piece inch shim set.......... .150 inch........ (1) .062 inch, (2) .031 inch, (2) .015 inch 0.38 [9.5]
(This set also known as

42-530-2825)

DSCH096 Series - Individual Shims Ø0.44 [11.2]
TYP
DSC Part No. Description Thickness Other part numbers 3.00 [76.2]

DSCH096-E015.......... Inch thickness shim........ .015 inch........ CSS 512-3 1.25 [31.8]
DSCH096-E032.......... Inch thickness shim........ .031 inch........ CSS 512-1
DSCH096-E062.......... Inch thickness shim........ .062 inch........ CSS 512-2 1.13 [28.6]
TYP
DSCH096 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH096-E155............Five piece inch shim set.......... .150 inch........ (1) .062 inch, (2) .031 inch, (2) .015 inch

(This set also known as 0.38 [9.5]
42-530-2850)

DSCH097 Series - Individual Shims Ø0.44 [11.2]
TYP
DSC Part No. Description Thickness Other part numbers
HOLE PATTERN IS
DSCH097-E015.......... Inch thickness shim........ .015 inch........ CSS 812-3 SYMMETRICAL ALONG
DSCH097-E032.......... Inch thickness shim........ .031 inch........ CSS 812-1 DIAGONAL
DSCH097-E062.......... Inch thickness shim........ .062 inch........ CSS 812-2
2.00 [50.8]
0.63 [15.9]
DSCH097 Series - Shim Sets 0.63 [15.9]

DSC Part No. Description Thickness Set includes 0.38 [9.5]

DSCH097-E155............Five piece inch shim set.......... .150 inch........ (1) .062 inch, (2) .031 inch, (2) .015 inch 0.63 [15.9] 0.38 [9.5]
(This set also known as 3.00 [76.2]
2.50 [63.5]
42-530-2900)

DSCH098 Series - Individual Shims Ø0.44 [11.2]
TYP
DSC Part No. Description Thickness Other part numbers

DSCH098-E015.......... Inch thickness shim........ .015 inch........ CSS 1010-3
DSCH098-E032.......... Inch thickness shim........ .031 inch........ CSS 1010-1
DSCH098-E062.......... Inch thickness shim........ .062 inch........ CSS 1010-2

DSCH098 Series - Shim Sets 1.74 [44.2] 2.50 [63.5]

DSC Part No. Description Thickness Set includes 0.38 [9.5]

DSCH098-E155............Five piece inch shim set.......... .150 inch........ (1) .062 inch, (2) .031 inch, (2) .015 inch 0.38 [9.5] 0.88 [22.2]
(This set also known as TYP (4)

42-530-2925)

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 29 2015

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

Ø0.44 [11.2]
TYP

DSCH099 Series - Individual Shims 3.00 [76.2]

DSC Part No. Description Thickness Other part numbers

DSCH099-E015.......... Inch thickness shim........ .015 inch........ CSS 1012-3 HOLE PATTERN IS
DSCH099-E032.......... Inch thickness shim........ .031 inch........ CSS 1012-1
DSCH099-E062.......... Inch thickness shim........ .062 inch........ CSS 1012-2 SYMMETRICAL ALONG

DIAGONAL 2.50 [63.5]

DSCH099 Series - Shim Sets 0.63 [15.9]
0.38 [9.5]
DSC Part No. Description Thickness Set includes
0.63 [15.9]
DSCH099-E155............Five piece inch shim set.......... .150 inch........ (1) .062 inch, (2) .031 inch, (2) .015 inch 1.63 [41.3]
(This set also known as
0.38 [9.5]
42-530-2950)

DSCH100 Series - Individual Shims Ø0.44 [11.2] 3.00 [76.2]
TYP
DSC Part No. Description Thickness Other part numbers
HOLE PATTERN IS
DSCH100-E015.......... Inch thickness shim........ .015 inch........ CSS 1212-3 SYMMETRICAL ALONG
DSCH100-E032.......... Inch thickness shim........ .031 inch........ CSS 1212-1 DIAGONAL
DSCH100-E062.......... Inch thickness shim........ .062 inch........ CSS 1212-2
3.00 [76.2]
2.24 [56.9]
DSCH100 Series - Shim Sets 0.38 [9.5]
1.25 [31.8]
DSC Part No. Description Thickness Set includes

DSCH100-E155............Five piece inch shim set.......... .150 inch........ (1) .062 inch, (2) .031 inch, (2) .015 inch 0.38 [9.5]
(This set also known as 1.00 [25.4]

42-530-2975)

DSCH101 Series - Individual Shims Ø0.44 [11.2] 3.00 [76.2]
TYP
DSC Part No. Description Thickness Other part numbers
HOLE PATTERN IS
DSCH101-E015.......... Inch thickness shim........ .015 inch........ CSS 1214-3 SYMMETRICAL ALONG
DSCH101-E032.......... Inch thickness shim........ .031 inch........ CSS 1214-1 DIAGONAL
DSCH101-E062.......... Inch thickness shim........ .062 inch........ CSS 1214-2
3.50 [88.9]

DSCH101 Series - Shim Sets 1.00 [25.4]
0.38 [9.5]
DSC Part No. Description Thickness Set includes
1.00 [25.4]
DSCH101-E155............Five piece inch shim set.......... .150 inch........ (1) .062 inch, (2) .031 inch, (2) .015 inch 0.38 [9.5]
(This set also known as 1.25 [31.8]

42-530-3000)

DSCH102 Series - Individual Shims Ø0.44 [11.2] 3.00 [76.2]
TYP
DSC Part No. Description Thickness Other part numbers 2.75 [69.9]
HOLE PATTERN IS
DSCH102-E015.......... Inch thickness shim........ .015 inch........ CSS 1218-3 SYMMETRICAL ALONG 1.00 [25.4]
DSCH102-E032.......... Inch thickness shim........ .031 inch........ CSS 1218-1 DIAGONAL 0.38 [9.5]
DSCH102-E062.......... Inch thickness shim........ .062 inch........ CSS 1218-2 1.00 [25.4]

DSCH102 Series - Shim Sets 4.50 [114.3]

DSC Part No. Description Thickness Set includes 0.38 [9.5]
1.25 [31.8]
DSCH102-E155............Five piece inch shim set.......... .150 inch........ (1) .062 inch, (2) .031 inch, (2) .015 inch
(This set also known as

42-530-3025)

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 30 2015

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

DSCH103 Series - Individual Shims Ø0.56 [14.2]
TYP
DSC Part No. Description Thickness Other part numbers
3.50 [88.9]
DSCH103-E015.......... Inch thickness shim........ .015 inch........ CSS 1417-3
DSCH103-E032.......... Inch thickness shim........ .031 inch........ CSS 1417-1
DSCH103-E062.......... Inch thickness shim........ .062 inch........ CSS 1417-2

1.25 [31.8]
TYP

DSCH103 Series - Shim Sets

DSC Part No. Description Thickness Set includes 0.50 [12.7]
0.50 [12.7]
DSCH103-E155............Five piece inch shim set.......... .150 inch........ (1) .062 inch, (2) .031 inch, (2) .015 inch 3.25 [82.6]
(This set also known as 4.25 [108.0]

42-530-3050)

DSCH104 Series - Individual Shims 4.00 [101.6]

DSC Part No. Description Thickness Other part numbers

DSCH104-E015.......... Inch thickness shim........ .015 inch........ CSS 1616-3 Ø0.56 [14.2]
DSCH104-E032.......... Inch thickness shim........ .031 inch........ CSS 1616-1 TYP
DSCH104-E062.......... Inch thickness shim........ .062 inch........ CSS 1616-2

DSCH104 Series - Shim Sets 1.50 [38.1] 4.00 [101.6]
TYP
DSC Part No. Description Thickness Set includes 0.50 [12.7]
0.50 [12.7] 1.50 [38.1]
DSCH104-E155............Five piece inch shim set.......... .150 inch........ (1) .062 inch, (2) .031 inch, (2) .015 inch
(This set also known as TYP

42-530-3075)

DSCH105 Series - Individual Shims

DSC Part No. Description Thickness Other part numbers

DSCH105-E015.......... Inch thickness shim........ .015 inch........ CSS 1816-3 Ø0.56 [14.2]
DSCH105-E032.......... Inch thickness shim........ .031 inch........ CSS 1816-1 TYP (8)
DSCH105-E062.......... Inch thickness shim........ .062 inch........ CSS 1816-2

DSCH105 Series - Shim Sets 1.50 [38.1] TYP

DSC Part No. Description Thickness Set includes Ø1.00 [25.4]
0.50 [12.7]
DSCH105-E155............Five piece inch shim set.......... .150 inch........ (1) .062 inch, (2) .031 inch, (2) .015 inch 0.50 [12.7]
(This set also known as
1.75 [44.5]
42-530-4000) TYP

4.50 [114.3]

DSCH106 Series - Individual Shims Ø0.56 [14.2] 4.50 [114.3]
TYP

DSC Part No. Description Thickness Other part numbers

DSCH106-E015.......... Inch thickness shim........ .015 inch........ CSS 1822-3 2.25 [57.2]
DSCH106-E032.......... Inch thickness shim........ .031 inch........ CSS 1822-1 TYP (4)
DSCH106-E062.......... Inch thickness shim........ .062 inch........ CSS 1822-2

DSCH106 Series - Shim Sets 5.50 [139.7]
0.50 [12.7]
DSC Part No. Description Thickness Set includes

DSCH106-E155............Five piece inch shim set.......... .150 inch........ (1) .062 inch, (2) .031 inch, (2) .015 inch 0.50 [12.7]
(This set also known as
1.75 [44.5]
42-530-4025) TYP (4)

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 31 2015

Sets are bulk shipped Order SHIMS by individual piece or set Drawings are not to scale

Metric shims over 0.25mm thick are black oxided Slots and holes are centered unless otherwise noted

4.00 [101.6]
0.56 [14.2]

DSCH107 Series - Individual Shims

DSC Part No. Description Thickness

DSCH107-E059.......... Inch thickness shim........ .059 inch 1.50 [38.1]

0.75 [19.1] 2.50 [63.5] 0.75 [19.1]
4.00 [101.6] 1.50 [38.1]
DSCH107 Series - Shim Sets
0.56 [14.2]
DSC Part No. Description Thickness Set includes Other part numbers TYP

DSCH107-E244............Four piece inch shim set......... .236 inch........ (4) .059 inch..... D113063

DSCH108 Series - Individual Shims

DSC Part No. Description Thickness

DSCH108-E059.......... Inch thickness shim........ .059 inch

0.75 [19.1]

DSCH108 Series - Shim Sets 3.00 [76.2] .75 [19.1]
4.50 [114.3] 0.75 [19.1]
DSC Part No. Description Thickness Set includes Other part numbers
0.56 [14.2]
DSCH108-E244............Four piece inch shim set......... .236 inch........ (4) .059 inch..... D113064 TYP

DSCH109 Series - Individual Shims

DSC Part No. Description Thickness

DSCH109-E059.......... Inch thickness shim........ .059 inch 1.50 [38.1]

DSCH109 Series - Shim Sets 0.75 [19.1] 3.50 [88.9]
5.00 [127.0]
DSC Part No. Description Thickness Set includes Other part numbers

DSCH109-E244............Four piece inch shim set......... .236 inch........ (4) .059 inch..... D113065

9.00 [228.6]
0.56 [14.2] TYP

DSCH110 Series - Individual Shims

DSC Part No. Description Thickness

DSCH110-E059.......... Inch thickness shim........ .059 inch 1.50 [38.1]

0.75 [19.1]

DSCH110 Series - Shim Sets 0.75 [19.1] 7.50 [190.5]

DSC Part No. Description Thickness Set includes Other part numbers

DSCH110-E244............Four piece inch shim set......... .236 inch........ (4) .059 inch..... D113066

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 32 2015

Drawings are not to scale Shims
Sets are bulk shipped Slots and holes are centered unless otherwise noted

Most spacers are etched on the side with thickness

DSCH111 Series Shims 0.65 [16.5]
TYP
DSC Part No. Thickness Other part numbers
0.63 [15.9]
DSCH111-E005.......... .005 inch........ FSD 14195-55 1.25 [31.8]
DSCH111-E010.......... .010 inch........ FSD 14195-54
DSCH111-E015.......... .015 inch........ FSD 14195-53
DSCH111-E030.......... .030 inch........ FSD 14195-52
DSCH111-E060.......... .060 inch........ FSD 14195-51
DSCH111-E125.......... .125 inch........ FSD 14195-50

0.70 [17.8] 1.60 [40.6]
3.00 [76.2]
DSCH111 Series - Shim Sets
0.56 [14.2]
DSC Part No. Description Thickness Set includes TYP

DSCH111-E155............Five piece inch shim set.......... .150 inch........ (1) .060 inch, (2) .030 inch, (2) .015 inch 1.00 [25.4]

DSCH112 Series Shims

DSC Part No. Thickness Other part numbers

DSCH112-E005.......... .005 inch........ FSD 5590-55 1.50 [38.1]
DSCH112-E010.......... .010 inch........ FSD 5590-54
DSCH112-E015.......... .015 inch........ FSD 5590-53
DSCH112-E030.......... .030 inch........ FSD 5590-52
DSCH112-E060.......... .060 inch........ FSD 5590-51
DSCH112-E125.......... .125 inch........ FSD 5590-50

DSCH112 Series - Shim Sets 1.00 [25.4] 2.00 [50.8]
4.00 [101.6]
DSC Part No. Description Thickness Set includes
0.35 [9.0]
DSCH112-E155............Five piece inch shim set.......... .150 inch........ (1) .060 inch, (2) .030 inch, (2) .015 inch

DSCH113 Series Shims

DSC Part No. Thickness Other part numbers

DSCH113-M010..........0.10mm..........11-38D 336 065/6 0.39 [10.0]
DSCH113-M020..........0.20mm..........11-38D 336 065/5
DSCH113-M050..........0.50mm..........11-38D 336 065/4 .79 [20.0]
DSCH113-M100..........1.00mm.......... 11-38D 336 065/3
DSCH113-M200..........2.00mm..........11-38D 336 065/2
DSCh113-M500.......... 5.00mm..........11-38D 336 065/1

0.39 [10.0] .59 [15.0]
2.56 [65.0]
DSCH113 Series - Shim Sets

DSC Part No. Description Thickness Set includes

DSCH113-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm

DSCH114 Series Shims 0.35 [9.0] 0.59 [15.0]
.79 [20.0] 0.39 [10.0]
DSC Part No. Thickness Other part numbers

DSCH114-M010..........0.10mm..........11-38D 336 066/6
DSCH114-M020..........0.20mm..........11-38D 336 066/5
DSCH114-M050..........0.50mm..........11-38D 336 066/4
DSCH114-M100..........1.00mm.......... 11-38D 336 066/3
DSCH114-M200..........2.00mm..........11-38D 336 066/2
DSCH114-M500..........5.00mm..........11-38D 336 066/1

DSCH114 Series - Shim Sets 1.97 [50.0]

DSC Part No. Description Thickness Set includes

DSCH114-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 33 2015

Drawings are not to scale Shims Slots and holes are centered unless otherwise noted
Metric spacers are black oxided

Most spacers are etched on the side with thickness

0.35 [9.0]

DSCH115 Series Shims

DSC Part No. Thickness Other part numbers

DSCH115-M010..........0.10MM..........11-38D 495 551/6, 5 279 665 1.97 [50.0]
DSCH115-M020..........0.20MM..........11-38D 495 551/5
DSCH115-M025..........0.25MM 0.39 [10.0]
DSCH115-M050..........0.50MM..........11-38D 495 551/4, 5 279 666
DSCH115-M100..........1.00MM.......... 11-38D 495 551/3, 5 279 667
DSCH115-M200..........2.00MM..........11-38D 495 551/2, 5 279 668
DSCH115-M500..........5.00MM..........11-38D 495 551/1

DSCH115 Series - Shim Sets 0.39 [10.0]

DSC Part No. Description Thickness Set includes 0.59 [15.0]

DSCH115-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm 1.97 [50.0]
DSCH115-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH116 Series Shims

DSC Part No. Thickness Other part numbers 0.59 [15.0]
0.39 [10.0]
DSCH116-M010..........0.10MM.......... 3 699 426 0.35 [9.0]
DSCH116-M025..........0.25MM 0.79 [20.0]
DSCH116-M050..........0.50MM.......... 3 699 427
DSCH116-M100..........1.00MM.......... 3 699 428
DSCH116-M200..........2.00MM.......... 3 699 429

DSCH116 Series - Shim Sets 0.29 [7.5]

DSC Part No. Description Thickness Set includes 1.18 [30.0]
0.59 [15.0]
DSCH116-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm 0.39 [10.0]
DSCH116-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH117 Series Shims

DSC Part No. Thickness Other part numbers

DSCH117-M010..........0.10MM.......... 3 699 430 0.35 [9.0]
DSCH117-M025......... 0.25MM 0.79 [20.0]
DSCH117-M050..........0.50MM.......... 3 699 431
DSCH117-M100..........1.00MM.......... 3 699 432
DSCH117-M200..........2.00MM.......... 3 699 433

DSCH117 Series - Shim Sets 0.29 [7.5]

DSC Part No. Description Thickness Set includes

DSCH117-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm 1.77 [45.0]
DSCH117-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm 0.59 [15.0]
0.39 [10.0]
DSCH118 Series Shims

DSC Part No. Thickness Other part numbers

DSCH118-M010..........0.10MM.......... 3 699 434 0.35 [9.0]
DSCH118-M025..........0.25MM 0.79 [20.0]
DSCH118-M050..........0.50MM.......... 3 699 435
DSCH118-M100..........1.00MM.......... 3 699 436
DSCH118-M200..........2.00MM.......... 3 699 437

DSCH118 Series - Shim Sets 0.29 [7.5]

DSC Part No. Description Thickness Set includes

DSCH118-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm 2.36 [60.0]
DSCH118-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 34 2015

Drawings are not to scale Shims Slots and holes are centered unless otherwise noted

DSCH119 Series Shims 0.41 [10.5]
0.37 [9.5]
DSC Part No. Thickness Other part numbers

DSCH119-M025..........0.25MM.......... TYPE 1-T025, DSC1918-51
DSCH119-M050..........0.50MM.......... TYPE 1-T050, DSC1918-52
DSCH119-M100..........1.00MM.......... TYPE 1-T100, DSC1918-53
DSCH119-M200.......... 2.00MM.......... TYPE 1-T200, DSC1918-54

.75 [19.0]

DSCH119 Series - Shim Sets 0.71 [18.0]

DSC Part No. Description Thickness Set includes .79 [20.0]
0.41 [10.5]
DSCH119-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH119-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH120 Series Shims 0.34 [9.0]

DSC Part No. Thickness Other part numbers

DSCH120-M025..........0.25MM.......... TYPE 2-T025, DSC1938-51
DSCH120-M050..........0.50MM.......... TYPE 2-T050, DSC1938-52
DSCH120-M100..........1.00MM.......... TYPE 2-T100, DSC1938-53
DSCH120-M200.......... 2.00MM.......... TYPE 2-T200, DSC1938-54

0.37 [9.5]

DSCH120 Series - Shim Sets .75 [19.0]

DSC Part No. Description Thickness Set includes 1.50 [38.0]

DSCH120-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH120-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH121 Series Shims 1.89 [48.0]

DSC Part No. Thickness Other part numbers

DSCH121-M025..........0.25MM.......... TYPE 3-T025, DSC1948-51 .41 [10.5]
DSCH121-M050..........0.50MM.......... TYPE 3-T050, DSC1948-52
DSCH121-M100..........1.00MM.......... TYPE 3-T100, DSC1948-53
DSCH121-M200.......... 2.00MM.......... TYPE 3-T200, DSC1948-54

.75 [19.0]

0.37 [9.5]

DSCH121 Series - Shim Sets 0.34 [9.0] 0.59 [15.0]
TYP
DSC Part No. Description Thickness Set includes
2.48 [63.0]
DSCH121-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH121-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm .37 [9.5]

DSCH122 Series Shims

DSC Part No. Thickness Other part numbers

DSCH122-M025..........0.25MM.......... TYPE 4-T025, DSC1963-51 .41 [10.5]
DSCH122-M050..........0.50MM.......... TYPE 4-T050, DSC1963-52
DSCH122-M100..........1.00MM.......... TYPE 4-T100, DSC1963-53
DSCH122-M200.......... 2.00MM.......... TYPE 4-T200, DSC1963-54

75 [19.0]

DSCH122 Series - Shim Sets 0.34 [9.0] .59 [15.0]
TYP
DSC Part No. Description Thickness Set includes

DSCH122-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH122-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 35 2015

Drawings are not to scale Shims Slots and holes are centered unless otherwise noted

DSCH123 Series Shims 0.30 [7.5] 0.59 [15.0]
0.35 [9.0]
DSC Part No. Thickness Other part numbers

DSCH123-M010..........0.10MM.......... 3 193 188
DSCH123-M025..........0.25MM
DSCH123-M050..........0.50MM.......... 3 193 189
DSCH123-M100..........1.00MM.......... 3 193 190
DSCH123-M200..........2.00MM.......... 3 193 191

DSCH123 Series - Shim Sets 0.59 [15.0] 0.30 [7.5]

DSC Part No. Description Thickness Set includes 1.18 [30.0]
0.59 [15.0]
DSCH123-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm 0.35 [9.0]
DSCH123-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm
0.30 [7.5]
DSCH124 Series Shims 0.30 [7.5]
1.77 [45.0]
DSC Part No. Thickness Other part numbers
0.59 [15.0]
DSCH124-M010..........0.10MM.......... 3 193 192 0.35 [9.0]
DSCH124-M025..........0.25MM
DSCH124-M050..........0.50MM.......... 3 193 193
DSCH124-M100..........1.00MM.......... 3 193 194
DSCH124-M200..........2.00MM.......... 3 193 195

DSCH124 Series - Shim Sets 0.59 [15.0]

DSC Part No. Description Thickness Set includes

DSCH124-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH124-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

DSCH125 Series Shims 0.30 [7.5]

DSC Part No. Thickness Other part numbers

DSCH125-M010..........0.10MM.......... 3 193 196
DSCH125-M025..........0.25MM
DSCH125-M050..........0.50MM.......... 3 193 197
DSCH125-M100..........1.00MM.......... 3 193 198
DSCH125-M200..........2.00MM.......... 3 193 199

0.30 [7.5]

DSCH125Series - Shim Sets 0.59 [15.0]

DSC Part No. Description Thickness Set includes 2.36 [60.0]

DSCH125-M505........... Five piece metric shim set....... 5.00mm.......... (1) 2.00mm, (2) 1.00mm, (2) .50mm
DSCH125-M507........... Seven piece metric shim set... 5.00mm.......... (1) 2.00mm, (1) 1.00mm, (3) .50mm, (2) .25mm

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 36 2015

SPACERS

Drawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted

Most spacers are etched on the side with thickness

Fiber Optic Laser Cutting

Douglas Stamping Company uses a 2 kilowatt diode pumped fiber optic laser cutting system
in addition to our traditional dies and presses. For longer running jobs and those requiring
bending and drawing, hard-tooled dies are still the most economical way to produce a wide
variety of products. For shorter runs and hard or unusual materials, laser cutting offers
greater flexibility and much quicker turn-around.

This state-of-the-art system combines extreme reliability with lower overhead than traditional
laser systems, allowing us to quickly and accurately produce shims, spacers, washers, rings,
gaskets and other specialty and custom items. We can cleanly and accurately cut most any
metal with this system, including copper, brass and titanium.

We are pleased to quote to your drawings. Please send inquiries to us by email at
[email protected], FAX at 248 542-3287, or call 542-3940 to discuss your
requirements.

DSCP001 Series Spacers Ø0.44 [11.2] 1.72 [43.7]
TYP 1.00 [25.4]
DSC Part No. Thickness Other part numbers
Not black oxided 0.90 [22.9]
DSCP001-M200.......... 2.00mm..........FSD 39279-64 1.38 [35.1]
DSCP001-M225.......... 2.25mm..........FSD 39279-65 0.41 [10.4]
DSCP001-M250.......... 2.50mm..........FSD 39279-66 0.75 [19.1]
DSCP001-M275.......... 2.75mm..........FSD 39279-67 0.58 [14.7]
DSCP001-M300.......... 3.00mm.......... FSD 39279-51
DSCP001-M325.......... 3.25mm.......... FSD 39279-52
DSCP001-M350.......... 3.50mm.......... FSD 39279-53
DSCP001-M375.......... 3.75mm.......... FSD 39279-54
DSCP001-M400.......... 4.00mm..........FSD 39279-55
DSCP001-M425.......... 4.25mm..........FSD 39279-56
DSCP001-M450.......... 4.50mm..........FSD 39279-57
DSCP001-M475.......... 4.75mm..........FSD 39279-58
DSCP001-M500.......... 5.00mm.......... FSD 39279-59
DSCP001-M525.......... 5.25mm.......... FSD 39279-60
DSCP001-M550.......... 5.50mm.......... FSD 39279-61
DSCP001-M575.......... 5.75mm.......... FSD 39279-62
DSCP001-M600.......... 6.00mm.......... FSD 39279-63

DSCP002 Series Spacers

DSC Part No. Thickness Other part numbers Ø0.37 [9.4]
TYP
DSCP002-M200.......... 2.00mm..........FSD 39280-64
DSCP002-M225.......... 2.25mm..........FSD 39280-65 Not black oxided
DSCP002-M250.......... 2.50mm..........FSD 39280-66
DSCP002-M275.......... 2.75mm..........FSD 39280-67 0.40 [10.2]
DSCP002-M300.......... 3.00mm.......... FSD 39280-51
DSCP002-M325.......... 3.25mm.......... FSD 39280-52
DSCP002-M350.......... 3.50mm.......... FSD 39280-53
DSCP002-M375.......... 3.75mm.......... FSD 39280-54
DSCP002-M400.......... 4.00mm..........FSD 39280-55
DSCP002-M425.......... 4.25mm..........FSD 39280-56
DSCP002-M450.......... 4.50mm..........FSD 39280-57
DSCP002-M475.......... 4.75mm..........FSD 39280-58
DSCP002-M500.......... 5.00mm.......... FSD 39280-59
DSCP002-M525.......... 5.25mm.......... FSD 39280-60
DSCP002-M550.......... 5.50mm.......... FSD 39280-61
DSCP002-M575.......... 5.75mm.......... FSD 39280-62
DSCP002-M600.......... 6.00mm.......... FSD 39280-63

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 37 2015

SPACERS

Drawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted

Most spacers are etched on the side with thickness

Ø0.44 [11.2] 2.50 [63.5]

DSCP003 Series Spacers TYP 1.00 [25.4]

DSC Part No. Thickness Other part numbers 0.81 [20.6]
TYP
DSCP003-M200.......... 2.00mm..........FSD 39281-64 Not black oxided
DSCP003-M225.......... 2.25mm..........FSD 39281-65
DSCP003-M250.......... 2.50mm..........FSD 39281-66 0.44 [11.2]
DSCP003-M275.......... 2.75mm..........FSD 39281-67
DSCP003-M300.......... 3.00mm.......... FSD 39281-51
DSCP003-M325.......... 3.25mm.......... FSD 39281-52
DSCP003-M350.......... 3.50mm.......... FSD 39281-53
DSCP003-M375.......... 3.75mm.......... FSD 39281-54
DSCP003-M400.......... 4.00mm..........FSD 39281-55
DSCP003-M425.......... 4.25mm..........FSD 39281-56
DSCP003-M450.......... 4.50mm..........FSD 39281-57
DSCP003-M475.......... 4.75mm..........FSD 39281-58
DSCP003-M500.......... 5.00mm.......... FSD 39281-59
DSCP003-M525.......... 5.25mm.......... FSD 39281-60
DSCP003-M550.......... 5.50mm.......... FSD 39281-61
DSCP003-M575.......... 5.75mm.......... FSD 39281-62
DSCP003-M600.......... 6.00mm.......... FSD 39281-63

DSCP004 Series Spacers

DSC Part No. Thickness Other part numbers Ø0.41 [11.2]

DSCP004-M200.......... 2.00mm..........FSD 40221-51 1.00 [25.4] 0.88 [22.2]
DSCP004-M225.......... 2.25mm..........FSD 40221-52 Ø0.41 [10.4]
DSCP004-M250.......... 2.50mm..........FSD 40221-53 1.75 [44.5]
DSCP004-M275.......... 2.75mm..........FSD 40221-54 TYP 0.88 [22.4]
DSCP004-M300.......... 3.00mm.......... FSD 40221-55
DSCP004-M325.......... 3.25mm.......... FSD 40221-56 0.44 [11.2] 0.88 [22.2]
DSCP004-M350.......... 3.50mm.......... FSD 40221-57 2.00 [50.8]
DSCP004-M375.......... 3.75mm.......... FSD 40221-58
DSCP004-M400.......... 4.00mm..........FSD 40221-59 0.88 [22.4]
DSCP004-M425.......... 4.25mm..........FSD 40221-60 1.13 [28.6]
DSCP004-M450.......... 4.50mm..........FSD 40221-61
DSCP004-M475.......... 4.75mm..........FSD 40221-62
DSCP004-M500.......... 5.00mm.......... FSD 40221-63
DSCP004-M525.......... 5.25mm.......... FSD 40221-64
DSCP004-M550.......... 5.50mm.......... FSD 40221-65
DSCP004-M575.......... 5.75mm.......... FSD 40221-66
DSCP004-M600.......... 6.00mm.......... FSD 40221-67

DSCP005 Series Spacers

DSC Part No. Thickness Other part numbers

DSCP005-M200.......... 2.00mm..........FSD 40222-51
DSCP005-M225.......... 2.25mm..........FSD 40222-52
DSCP005-M250.......... 2.50mm..........FSD 40222-53
DSCP005-M275.......... 2.75mm..........FSD 40222-54
DSCP005-M300.......... 3.00mm.......... FSD 40222-55
DSCP005-M325.......... 3.25mm.......... FSD 40222-56
DSCP005-M350.......... 3.50mm.......... FSD 40222-57
DSCP005-M375.......... 3.75mm.......... FSD 40222-58
DSCP005-M400.......... 4.00mm..........FSD 40222-59
DSCP005-M425.......... 4.25mm..........FSD 40222-60
DSCP005-M450.......... 4.50mm..........FSD 40222-61
DSCP005-M475.......... 4.75mm..........FSD 40222-62
DSCP005-M500.......... 5.00mm.......... FSD 40222-63
DSCP005-M525.......... 5.25mm.......... FSD 40222-64
DSCP005-M550.......... 5.50mm.......... FSD 40222-65
DSCP005-M575.......... 5.75mm.......... FSD 40222-66
DSCP005-M600.......... 6.00mm.......... FSD 40222-67

DSCP006 Series Spacers Ø0.41 [10.4]

DSC Part No. Thickness Other part numbers TYP
0.44 [11.2]
DSCP006-M200.......... 2.00mm..........FSD 40223-51
DSCP006-M225.......... 2.25mm..........FSD 40223-52
DSCP006-M250.......... 2.50mm..........FSD 40223-53
DSCP006-M275.......... 2.75mm..........FSD 40223-54
DSCP006-M300.......... 3.00mm.......... FSD 40223-55
DSCP006-M325.......... 3.25mm.......... FSD 40223-56
DSCP006-M350.......... 3.50mm.......... FSD 40223-57
DSCP006-M375.......... 3.75mm.......... FSD 40223-58
DSCP006-M400.......... 4.00mm..........FSD 40223-59
DSCP006-M425.......... 4.25mm..........FSD 40223-60
DSCP006-M450.......... 4.50mm..........FSD 40223-61
DSCP006-M475.......... 4.75mm..........FSD 40223-62
DSCP006-M500.......... 5.00mm.......... FSD 40223-63
DSCP006-M525.......... 5.25mm.......... FSD 40223-64
DSCP006-M550.......... 5.50mm.......... FSD 40223-65
DSCP006-M575.......... 5.75mm.......... FSD 40223-66
DSCP006-M600.......... 6.00mm.......... FSD 40223-67

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 38 2015

SPACERS

Drawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted

Most spacers are etched on the side with thickness

Ø0.41 [10.4] 2.25 [57.2]

DSCP007 Series Spacers TYP 0.88 [22.4]

DSC Part No. Thickness Other part numbers 0.69 [17.5]
TYP
DSCP007-M200.......... 2.00mm..........FSD 40224-51 0.44 [11.2]
DSCP007-M225.......... 2.25mm..........FSD 40224-52
DSCP007-M250.......... 2.50mm..........FSD 40224-53
DSCP007-M275.......... 2.75mm..........FSD 40224-54
DSCP007-M300.......... 3.00mm.......... FSD 40224-55
DSCP007-M325.......... 3.25mm.......... FSD 40224-56
DSCP007-M350.......... 3.50mm.......... FSD 40224-57
DSCP007-M375.......... 3.75mm.......... FSD 40224-58
DSCP007-M400.......... 4.00mm..........FSD 40224-59
DSCP007-M425.......... 4.25mm..........FSD 40224-60
DSCP007-M450.......... 4.50mm..........FSD 40224-61
DSCP007-M475.......... 4.75mm..........FSD 40224-62
DSCP007-M500.......... 5.00mm..........FSD 40224-63
DSCP007-M525.......... 5.25mm..........FSD 40224-64
DSCP007-M550.......... 5.50mm..........FSD 40224-65
DSCP007-M575.......... 5.75mm..........FSD 40224-66
DSCP007-M600.......... 6.00mm..........FSD 40224-67

DSCP008 Series Spacers Ø0.41 [10.4] 2.50 [63.5]

DSC Part No. Thickness Other part numbers TYP 0.88 [22.4]

DSCP008-M200.......... 2.00mm..........FSD 40225-51 0.81 [20.6]
TYP
DSCP008-M225.......... 2.25mm..........FSD 40225-52
3.00 [76.2]
DSCP008-M250.......... 2.50mm..........FSD 40225-53
0.88 [22.4]
DSCP008-M275.......... 2.75mm..........FSD 40225-54
1.06 [27.0]
DSCP008-M300.......... 3.00mm.......... FSD 40225-55 TYP

DSCP008-M325.......... 3.25mm.......... FSD 40225-56

DSCP008-M350.......... 3.50mm.......... FSD 40225-57

DSCP008-M375.......... 3.75mm.......... FSD 40225-58

DSCP008-M400.......... 4.00mm..........FSD 40225-59

DSCP008-M425.......... 4.25mm..........FSD 40225-60

DSCP008-M450.......... 4.50mm..........FSD 40225-61

DSCP008-M475.......... 4.75mm..........FSD 40225-62

DSCP008-M500.......... 5.00mm..........FSD 40225-63

DSCP008-M525.......... 5.25mm..........FSD 40225-64

DSCP008-M550.......... 5.50mm..........FSD 40225-65 0.44 [11.2]
DSCP008-M575.......... 5.75mm..........FSD 40225-66

DSCP008-M600.......... 6.00mm..........FSD 40225-67

DSCP009 Series Spacers Ø0.41 [10.4]

DSC Part No. Thickness Other part numbers TYP
0.44 [11.2]
DSCP009-M200.......... 2.00mm..........FSD 40226-51
DSCP009-M225.......... 2.25mm..........FSD 40226-52
DSCP009-M250.......... 2.50mm..........FSD 40226-53
DSCP009-M275.......... 2.75mm..........FSD 40226-54
DSCP009-M300.......... 3.00mm.......... FSD 40226-55
DSCP009-M325.......... 3.25mm.......... FSD 40226-56
DSCP009-M350.......... 3.50mm.......... FSD 40226-57
DSCP009-M375.......... 3.75mm.......... FSD 40226-58
DSCP009-M400.......... 4.00mm..........FSD 40226-59
DSCP009-M425.......... 4.25mm..........FSD 40226-60
DSCP009-M450.......... 4.50mm..........FSD 40226-61
DSCP009-M475.......... 4.75mm..........FSD 40226-62
DSCP009-M500.......... 5.00mm..........FSD 40226-63
DSCP009-M525.......... 5.25mm..........FSD 40226-64
DSCP009-M550.......... 5.50mm..........FSD 40226-65
DSCP009-M575.......... 5.75mm..........FSD 40226-66
DSCP009-M600.......... 6.00mm..........FSD 40226-67

DSCP010 Series Spacers 3.50 [88.9]

DSC Part No. Thickness Other part numbers

DSCP010-M200.......... 2.00mm..........FSD 40227-51 0.42 [10.7] 0.88 [22.2] 0.88 [22.4]
DSCP010-M225.......... 2.25mm..........FSD 40227-52 TYP
DSCP010-M250.......... 2.50mm..........FSD 40227-53 Ø0.41 [10.4]
DSCP010-M275.......... 2.75mm..........FSD 40227-54 TYP
DSCP010-M300.......... 3.00mm.......... FSD 40227-55
DSCP010-M325.......... 3.25mm.......... FSD 40227-56
DSCP010-M350.......... 3.50mm.......... FSD 40227-57
DSCP010-M375.......... 3.75mm.......... FSD 40227-58
DSCP010-M400.......... 4.00mm..........FSD 40227-59
DSCP010-M425.......... 4.25mm..........FSD 40227-60
DSCP010-M450.......... 4.50mm..........FSD 40227-61
DSCP010-M475.......... 4.75mm..........FSD 40227-62
DSCP010-M500.......... 5.00mm..........FSD 40227-63
DSCP010-M525.......... 5.25mm..........FSD 40227-64
DSCP010-M550.......... 5.50mm..........FSD 40227-65
DSCP010-M575.......... 5.75mm..........FSD 40227-66
DSCP010-M600.......... 6.00mm..........FSD 40227-67

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 39 2015

SPACERS

Drawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted

Ø0.44 [11.2] Most spacers are etched on the side with thickness
TYP

DSCP011 Series Spacers 4.00 [101.6]

DSC Part No. Thickness Other part numbers 1.00 [25.4]
TYP
DSCP011-M200.......... 2.00mm..........FSD 40228-51 0.88 [22.4]
DSCP011-M225.......... 2.25mm..........FSD 40228-52 0.50 [12.7]
DSCP011-M250.......... 2.50mm..........FSD 40228-53
DSCP011-M275.......... 2.75mm..........FSD 40228-54
DSCP011-M300.......... 3.00mm.......... FSD 40228-55
DSCP011-M325.......... 3.25mm.......... FSD 40228-56
DSCP011-M350.......... 3.50mm.......... FSD 40228-57
DSCP011-M375.......... 3.75mm.......... FSD 40228-58
DSCP011-M400.......... 4.00mm..........FSD 40228-59
DSCP011-M425.......... 4.25mm..........FSD 40228-60
DSCP011-M450.......... 4.50mm..........FSD 40228-61
DSCP011-M475.......... 4.75mm..........FSD 40228-62
DSCP011-M500.......... 5.00mm.......... FSD 40228-63
DSCP011-M525.......... 5.25mm.......... FSD 40228-64
DSCP011-M550.......... 5.50mm.......... FSD 40228-65
DSCP011-M575.......... 5.75mm.......... FSD 40228-66
DSCP011-M600.......... 6.00mm.......... FSD 40228-67

DSCP012 Series Spacers 0.37 [9.4] 0.74 [18.8]
1.48 [37.6] Ø0.41 [10.4]
DSC Part No. Thickness Other part numbers
0.49 [12.4] 0.98 [24.9]
DSCP012-M200.......... 2.00mm..........FSD 40229-51
DSCP012-M225.......... 2.25mm..........FSD 40229-52 0.63 [16.0] .16R TYP
DSCP012-M250.......... 2.50mm..........FSD 40229-53
DSCP012-M275.......... 2.75mm..........FSD 40229-54 1.26 [32.0] 0.40 [10.2] TYP
DSCP012-M300.......... 3.00mm.......... FSD 40229-55
DSCP012-M325.......... 3.25mm.......... FSD 40229-56 1.12 [28.4]
DSCP012-M350.......... 3.50mm.......... FSD 40229-57
DSCP012-M375.......... 3.75mm.......... FSD 40229-58
DSCP012-M400.......... 4.00mm..........FSD 40229-59
DSCP012-M425.......... 4.25mm..........FSD 40229-60
DSCP012-M450.......... 4.50mm..........FSD 40229-61
DSCP012-M475.......... 4.75mm..........FSD 40229-62
DSCP012-M500.......... 5.00mm.......... FSD 40229-63
DSCP012-M525.......... 5.25mm.......... FSD 40229-64
DSCP012-M550.......... 5.50mm.......... FSD 40229-65
DSCP012-M575.......... 5.75mm.......... FSD 40229-66
DSCP012-M600.......... 6.00mm.......... FSD 40229-67

DSCP013 Series Spacers

DSC Part No. Thickness Other part numbers

DSCP013-M200.......... 2.00mm..........FSD 40230-51 1.25 [31.8] 0.64 [16.3]
DSCP013-M225.......... 2.25mm..........FSD 40230-52 0.32 [8.1]
DSCP013-M250.......... 2.50mm..........FSD 40230-53
DSCP013-M275.......... 2.75mm..........FSD 40230-54 1.00 [25.4] Ø0.41 [10.4]
DSCP013-M300.......... 3.00mm.......... FSD 40230-55 0.56 [14.2] 0.40 [10.2] TYP
DSCP013-M325.......... 3.25mm.......... FSD 40230-56
DSCP013-M350.......... 3.50mm.......... FSD 40230-57 2.00 [50.8]
DSCP013-M375.......... 3.75mm.......... FSD 40230-58
DSCP013-M400.......... 4.00mm..........FSD 40230-59 1.62 [41.1]
DSCP013-M425.......... 4.25mm..........FSD 40230-60
DSCP013-M450.......... 4.50mm..........FSD 40230-61
DSCP013-M475.......... 4.75mm..........FSD 40230-62
DSCP013-M500.......... 5.00mm.......... FSD 40230-63
DSCP013-M525.......... 5.25mm.......... FSD 40230-64
DSCP013-M550.......... 5.50mm.......... FSD 40230-65
DSCP013-M575.......... 5.75mm.......... FSD 40230-66
DSCP013-M600.......... 6.00mm.......... FSD 40230-67

DSCP014 Series Spacers

DSC Part No. Thickness Other part numbers

DSCP014-M200.......... 2.00mm..........FSD 40231-51 1.25 [31.8] 0.64 [16.3]
DSCP014-M225.......... 2.25mm..........FSD 40231-52 0.32 [8.1]
DSCP014-M250.......... 2.50mm..........FSD 40231-53 1.25 [31.8] 0.81 [20.6]
DSCP014-M275.......... 2.75mm..........FSD 40231-54 Ø0.41 [10.4]
DSCP014-M300.......... 3.00mm.......... FSD 40231-55 2.50 [63.5]
DSCP014-M325.......... 3.25mm.......... FSD 40231-56
DSCP014-M350.......... 3.50mm.......... FSD 40231-57
DSCP014-M375.......... 3.75mm.......... FSD 40231-58
DSCP014-M400.......... 4.00mm..........FSD 40231-59
DSCP014-M425.......... 4.25mm..........FSD 40231-60
DSCP014-M450.......... 4.50mm..........FSD 40231-61
DSCP014-M475.......... 4.75mm..........FSD 40231-62
DSCP014-M500.......... 5.00mm.......... FSD 40231-63
DSCP014-M525.......... 5.25mm.......... FSD 40231-64
DSCP014-M550.......... 5.50mm.......... FSD 40231-65
DSCP014-M575.......... 5.75mm.......... FSD 40231-66
DSCP014-M600.......... 6.00mm.......... FSD 40231-67

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 40 2015

SPACERS

Drawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted

Most spacers are etched on the side with thickness

DSCP015 Series Spacers 1.34 [34.0]
0.35 [9.0]
DSC Part No. Thickness Other part #s DSC Part No. Thickness Other part #s
0.79 [20.0]
DSCP015-M300.......... 3.00mm.......... ASP330S DSCP015-M640.......... 6.40mm.......... ASP364S
DSCP015-M320.......... 3.20mm.......... ASP332S DSCP015-M660.......... 6.60mm.......... ASP366S
DSCP015-M340.......... 3.40mm.......... ASP334S DSCP015-M680.......... 6.80mm.......... ASP368S
DSCP015-M360.......... 3.60mm.......... ASP336S DSCP015-M700.......... 7.00mm.......... ASP370S
DSCP015-M380.......... 3.80mm.......... ASP338S
DSCP015-M400.......... 4.00mm.......... ASP340S 0.79 [20.0]
DSCP015-M420.......... 4.20mm.......... ASP342S
DSCP015-M440.......... 4.40mm.......... ASP344S 0.28 [7.0]
DSCP015-M460.......... 4.60mm.......... ASP346S
DSCP015-M480.......... 4.80mm.......... ASP348S
DSCP015-M500.......... 5.00mm.......... ASP350S
DSCP015-M520.......... 5.20mm.......... ASP352S
DSCP015-M540.......... 5.40mm.......... ASP354S
DSCP015-M560.......... 5.60mm.......... ASP356S
DSCP015-M580.......... 5.80mm.......... ASP358S
DSCP015-M600.......... 6.00mm.......... ASP360S
DSCP015-M620.......... 6.20mm.......... ASP362S

DSCP016 Series Spacers

DSC Part No. Thickness Other part #s DSC Part No. Thickness Other part #s 1.73 [44.0]
0.35 [9.0]
DSCP016-M300.......... 3.00mm.......... ASP430S DSCP016-M640.......... 6.40mm.......... ASP464S 1.18 [30.0]
DSCP016-M320.......... 3.20mm.......... ASP432S DSCP016-M660.......... 6.60mm.......... ASP466S
DSCP016-M340.......... 3.40mm.......... ASP434S DSCP016-M680.......... 6.80mm.......... ASP468S
DSCP016-M360.......... 3.60mm.......... ASP436S DSCP016-M700.......... 7.00mm.......... ASP470S
DSCP016-M380.......... 3.80mm.......... ASP438S
DSCP016-M400.......... 4.00mm.......... ASP440S 0.79 [20.0]
DSCP016-M420.......... 4.20mm.......... ASP442S
DSCP016-M440.......... 4.40mm.......... ASP444S 0.28 [7.0]
DSCP016-M460.......... 4.60mm.......... ASP446S
DSCP016-M480.......... 4.80mm.......... ASP448S
DSCP016-M500.......... 5.00mm.......... ASP450S
DSCP016-M520.......... 5.20mm.......... ASP452S
DSCP016-M540.......... 5.40mm.......... ASP454S
DSCP016-M560.......... 5.60mm.......... ASP456S
DSCP016-M580.......... 5.80mm.......... ASP458S
DSCP016-M600.......... 6.00mm.......... ASP460S
DSCP016-M620.......... 6.20mm.......... ASP462S

DSCP017 Series Spacers 0.28 [7.0] 1.42 [36.0]
0.35 [9.0] TYP
DSC Part No. Thickness Other part #s DSC Part No. Thickness Other part #s
0.79 [20.0]
DSCP017-M300.......... 3.00mm.......... ASP630S DSCP017-M640.......... 6.40mm.......... ASP664S
DSCP017-M320.......... 3.20mm.......... ASP632S DSCP017-M660.......... 6.60mm.......... ASP666S
DSCP017-M340.......... 3.40mm.......... ASP634S DSCP017-M680.......... 6.80mm.......... ASP668S
DSCP017-M360.......... 3.60mm.......... ASP636S DSCP017-M700.......... 7.00mm.......... ASP670S
DSCP017-M380.......... 3.80mm.......... ASP638S
DSCP017-M400.......... 4.00mm.......... ASP640S 1.57 [40.0]
DSCP017-M420.......... 4.20mm.......... ASP642S 2.13 [54.0]
DSCP017-M440.......... 4.40mm.......... ASP644S
DSCP017-M460.......... 4.60mm.......... ASP646S 0.31 [8.0]
DSCP017-M480.......... 4.80mm.......... ASP648S
DSCP017-M500.......... 5.00mm.......... ASP650S
DSCP017-M520.......... 5.20mm.......... ASP652S
DSCP017-M540.......... 5.40mm.......... ASP654S
DSCP017-M560.......... 5.60mm.......... ASP656S
DSCP017-M580.......... 5.80mm.......... ASP658S
DSCP017-M600.......... 6.00mm.......... ASP660S
DSCP017-M620.......... 6.20mm.......... ASP662S

DSCP018 Series Spacers 1.00 [25.4]

DSC Part No. Thickness Other part #s DSC Part No. Thickness Other part #s

DSCP018-M050.......... 0.50mm..........FSD 40774-45 DSCP018-M575.......... 5.75mm.......... FSD 40774-66 0.25 [6.5]

DSCP018-M100..........1.00mm.......... FSD 40774-47 DSCP018-M600.......... 6.00mm.......... FSD 40774-67

DSCP018-M200.......... 2.00mm..........FSD 40774-51

DSCP018-M225.......... 2.25mm..........FSD 40774-52

DSCP018-M250.......... 2.50mm..........FSD 40774-53

DSCP018-M275.......... 2.75mm..........FSD 40774-54

DSCP018-M300.......... 3.00mm..........FSD 40774-55 0.87 [22.2]
0.44 [11.1]
DSCP018-M325.......... 3.25mm..........FSD 40774-56 0.34 [8.7] TYP 0.49 [12.5]
DSCP018-M350.......... 3.50mm..........FSD 40774-57

DSCP018-M375.......... 3.75mm..........FSD 40774-58

DSCP018-M400.......... 4.00mm..........FSD 40774-59

DSCP018-M425.......... 4.25mm..........FSD 40774-60

DSCP018-M450.......... 4.50mm..........FSD 40774-61

DSCP018-M475.......... 4.75mm..........FSD 40774-62

DSCP018-M500.......... 5.00mm..........FSD 40774-63

DSCP018-M525.......... 5.25mm..........FSD 40774-64

DSCP018-M550.......... 5.50mm..........FSD 40774-65

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 41 2015

SPACERS

Drawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted

Most spacers are etched on the side with thickness

DSCP019 Series Spacers 0.99 [25.2] Ø.34 [8.7]
1.50 [38.1]
DSC Part No. Thickness Other part #s DSC Part No. Thickness Other part #s 0.87 [22.2]
0.50 [12.6]DSCP019-M050.......... 0.50mm..........FSD 40775-45 DSCP019-M575.......... 5.75mm..........FSD 40775-66 0.44 [11.1]

DSCP019-M100..........1.00mm.......... FSD 40775-47 DSCP019-M600.......... 6.00mm.......... FSD 40775-67

DSCP019-M200.......... 2.00mm..........FSD 40775-51

DSCP019-M225.......... 2.25mm..........FSD 40775-52

DSCP019-M250.......... 2.50mm..........FSD 40775-53

DSCP019-M275.......... 2.75mm..........FSD 40775-54 0.34 [8.7] TYP
DSCP019-M300.......... 3.00mm..........FSD 40775-55

DSCP019-M325.......... 3.25mm..........FSD 40775-56

DSCP019-M350.......... 3.50mm..........FSD 40775-57

DSCP019-M375.......... 3.75mm..........FSD 40775-58

DSCP019-M400.......... 4.00mm..........FSD 40775-59

DSCP019-M425.......... 4.25mm..........FSD 40775-60

DSCP019-M450.......... 4.50mm..........FSD 40775-61

DSCP019-M475.......... 4.75mm..........FSD 40775-62 0.75 [19.1]
DSCP019-M500.......... 5.00mm..........FSD 40775-63

DSCP019-M525.......... 5.25mm..........FSD 40775-64

DSCP019-M550.......... 5.50mm..........FSD 40775-65

DSCP020 Series Spacers Ø.34 [8.7]
TYP
DSC Part No. Thickness Other part #s DSC Part No. Thickness Other part #s

DSCP020-M050.......... 0.50mm..........FSD 40776-45 DSCP020-M575.......... 5.75mm.......... FSD 40776-66 2.00 [50.8]

DSCP020-M100..........1.00mm.......... FSD 40776-47 DSCP020-M600.......... 6.00mm.......... FSD 40776-67

DSCP020-M200.......... 2.00mm..........FSD 40776-51

DSCP020-M225.......... 2.25mm..........FSD 40776-52

DSCP020-M250.......... 2.50mm..........FSD 40776-53

DSCP020-M275.......... 2.75mm..........FSD 40776-54

DSCP020-M300.......... 3.00mm..........FSD 40776-55 0.87 [22.2]

DSCP020-M325.......... 3.25mm..........FSD 40776-56

DSCP020-M350.......... 3.50mm..........FSD 40776-57

DSCP020-M375.......... 3.75mm..........FSD 40776-58

DSCP020-M400.......... 4.00mm..........FSD 40776-59

DSCP020-M425.......... 4.25mm..........FSD 40776-60

DSCP020-M450.......... 4.50mm..........FSD 40776-61 0.55 [14.0]
TYP
DSCP020-M475.......... 4.75mm..........FSD 40776-62 0.45 [11.4]
DSCP020-M500.......... 5.00mm..........FSD 40776-63

DSCP020-M525.......... 5.25mm..........FSD 40776-64

DSCP020-M550.......... 5.50mm..........FSD 40776-65

DSCP021 Series Spacers Ø0.44 [11.2]
1.00 [25.4]
DSC Part No. Thickness Other part numbers 1.00 [25.4]

DSCP021-M200.......... 2.00mm..........FSD 40873-01
DSCP021-M225.......... 2.25mm..........FSD 40873-02
DSCP021-M250.......... 2.50mm..........FSD 40873-03
DSCP021-M275.......... 2.75mm..........FSD 40873-04
DSCP021-M300.......... 3.00mm..........FSD 40873-05
DSCP021-M325.......... 3.25mm..........FSD 40873-06
DSCP021-M350.......... 3.50mm..........FSD 40873-07
DSCP021-M375.......... 3.75mm..........FSD 40873-08
DSCP021-M400.......... 4.00mm..........FSD 40873-09
DSCP021-M425.......... 4.25mm..........FSD 40873-10
DSCP021-M450.......... 4.50mm..........FSD 40873-11
DSCP021-M475.......... 4.75mm..........FSD 40873-12
DSCP021-M500.......... 5.00mm..........FSD 40873-13
DSCP021-M525.......... 5.25mm..........FSD 40873-14
DSCP021-M550.......... 5.50mm..........FSD 40873-15
DSCP021-M575.......... 5.75mm..........FSD 40873-16
DSCP021-M600.......... 6.00mm..........FSD 40873-17

DSCP022 Series Spacers Ø0.44 [11.2]
TYP
DSC Part No. Thickness Other part numbers 1.50 [38.1]

DSCP022-M200.......... 2.00mm..........FSD 40874-01 0.44 [11.2] 1.00 [25.4]
DSCP022-M225.......... 2.25mm..........FSD 40874-02 0.63 [15.9]
DSCP022-M250.......... 2.50mm..........FSD 40874-03
DSCP022-M275.......... 2.75mm..........FSD 40874-04
DSCP022-M300.......... 3.00mm..........FSD 40874-05
DSCP022-M325.......... 3.25mm..........FSD 40874-06
DSCP022-M350.......... 3.50mm..........FSD 40874-07
DSCP022-M375.......... 3.75mm..........FSD 40874-08
DSCP022-M400.......... 4.00mm..........FSD 40874-09
DSCP022-M425.......... 4.25mm..........FSD 40874-10
DSCP022-M450.......... 4.50mm..........FSD 40874-11
DSCP022-M475.......... 4.75mm..........FSD 40874-12
DSCP022-M500.......... 5.00mm..........FSD 40874-13
DSCP022-M525.......... 5.25mm..........FSD 40874-14
DSCP022-M550.......... 5.50mm..........FSD 40874-15
DSCP022-M575.......... 5.75mm..........FSD 40874-16
DSCP022-M600.......... 6.00mm..........FSD 40874-17

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 42 2015

SPACERS

Drawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted

Most spacers are etched on the side with thickness

DSCP023 Series Spacers Ø0.44 [11.2] 2.13 [54.0]
TYP
DSC Part No. Thickness Other part numbers 1.00 [25.4]
0.44 [11.2]
DSCP023-M200.......... 2.00mm..........FSD 40875-01 0.63 [15.9]
DSCP023-M225.......... 2.25mm..........FSD 40875-02 TYP
DSCP023-M250.......... 2.50mm..........FSD 40875-03
DSCP023-M275.......... 2.75mm..........FSD 40875-04
DSCP023-M300.......... 3.00mm..........FSD 40875-05
DSCP023-M325.......... 3.25mm..........FSD 40875-06
DSCP023-M350.......... 3.50mm..........FSD 40875-07
DSCP023-M375.......... 3.75mm..........FSD 40875-08
DSCP023-M400.......... 4.00mm..........FSD 40875-09
DSCP023-M425.......... 4.25mm..........FSD 40875-10
DSCP023-M450.......... 4.50mm..........FSD 40875-11
DSCP023-M475.......... 4.75mm..........FSD 40875-12
DSCP023-M500.......... 5.00mm..........FSD 40875-13
DSCP023-M525.......... 5.25mm..........FSD 40875-14
DSCP023-M550.......... 5.50mm..........FSD 40875-15
DSCP023-M575.......... 5.75mm..........FSD 40875-16
DSCP023-M600.......... 6.00mm..........FSD 40875-17

DSCP024 Series Spacers Ø0.44 [11.2]
TYP
DSC Part No. Thickness Other part numbers
0.44 [11.2]
DSCP024-M200.......... 2.00mm..........FSD 40876-01 1.00 [25.4]
DSCP024-M225.......... 2.25mm..........FSD 40876-02
DSCP024-M250.......... 2.50mm..........FSD 40876-03 0.63 [15.9]
DSCP024-M275.......... 2.75mm..........FSD 40876-04 TYP
DSCP024-M300.......... 3.00mm..........FSD 40876-05
DSCP024-M325.......... 3.25mm..........FSD 40876-06 2.75 [69.9]
DSCP024-M350.......... 3.50mm..........FSD 40876-07
DSCP024-M375.......... 3.75mm..........FSD 40876-08
DSCP024-M400.......... 4.00mm..........FSD 40876-09
DSCP024-M425.......... 4.25mm..........FSD 40876-10
DSCP024-M450.......... 4.50mm..........FSD 40876-11
DSCP024-M475.......... 4.75mm..........FSD 40876-12
DSCP024-M500.......... 5.00mm..........FSD 40876-13
DSCP024-M525.......... 5.25mm..........FSD 40876-14
DSCP024-M550.......... 5.50mm..........FSD 40876-15
DSCP024-M575.......... 5.75mm..........FSD 40876-16
DSCP024-M600.......... 6.00mm..........FSD 40876-17

DSCP025 Series Spacers Ø0.44 [11.2]
TYP
DSC Part No. Thickness Other part numbers

DSCP025-M200.......... 2.00mm..........FSD 40877-01 1.00 [25.4]
DSCP025-M225.......... 2.25mm..........FSD 40877-02
DSCP025-M250.......... 2.50mm..........FSD 40877-03 1.19 [30.2] 0.63 [15.9]
DSCP025-M275.......... 2.75mm..........FSD 40877-04 TYP
DSCP025-M300.......... 3.00mm..........FSD 40877-05
DSCP025-M325.......... 3.25mm..........FSD 40877-06 3.50 [88.9]
DSCP025-M350.......... 3.50mm..........FSD 40877-07
DSCP025-M375.......... 3.75mm..........FSD 40877-08
DSCP025-M400.......... 4.00mm..........FSD 40877-09
DSCP025-M425.......... 4.25mm..........FSD 40877-10
DSCP025-M450.......... 4.50mm..........FSD 40877-11
DSCP025-M475.......... 4.75mm..........FSD 40877-12
DSCP025-M500.......... 5.00mm..........FSD 40877-13
DSCP025-M525.......... 5.25mm..........FSD 40877-14
DSCP025-M550.......... 5.50mm..........FSD 40877-15
DSCP025-M575.......... 5.75mm..........FSD 40877-16
DSCP025-M600.......... 6.00mm..........FSD 40877-17

DSCP026 Series Spacers

DSC Part No. Thickness Other part numbers Ø0.34 [8.6]

DSCP026-M025.......... 0.25mm..........FSD 41194-51 0.68 [17.1]
DSCP026-M050.......... 0.50mm..........FSD 41194-52
DSCP026-M100..........1.00mm.......... FSD 41194-53
DSCP026-M200.......... 2.00mm..........FSD 41194-54
DSCP026-M300.......... 3.00mm..........FSD 41194-55
DSCP026-M400.......... 4.00mm..........FSD 41194-56
DSCP026-M500.......... 5.00mm..........FSD 41194-57

0.68 [17.1]

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 43 2015

SPACERS

Drawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted

Most spacers are etched on the side with thickness

DSCP027 Series Spacers 0.34 [8.6]
0.68 [17.1]
DSC Part No. Thickness Other part numbers 0.68 [17.1]

DSCP027-M025.......... 0.25mm..........FSD 41238-51 0.34 [8.7]
DSCP027-M050.......... 0.50mm..........FSD 41238-52
DSCP027-M100..........1.00mm.......... FSD 41238-53
DSCP027-M200.......... 2.00mm..........FSD 41238-54
DSCP027-M300.......... 3.00mm..........FSD 41238-55
DSCP027-M400.......... 4.00mm..........FSD 41238-56
DSCP027-M500.......... 5.00mm..........FSD 41238-57

DSCP028 Series Spacers 1.63 [41.3]
0.39 [9.9] TYP
DSC Part No. Thickness Other part numbers 0.13 [3.2] TYP

DSCP028-M050.......... 0.50mm.......... 41-502-1901, SAS 32740-05 Ø0.34 [8.6] 1.06 [26.9]
DSCP028-M100..........1.00mm.......... 41-502-1902, SAS 32740-10 TYP 0.49 [12.4]
DSCP028-M150..........1.50mm.......... 41-502-1903, SAS 32740-15
DSCP028-M200.......... 2.00mm.......... 41-502-1904, SAS 32740-20 0.42 [10.7] 0.45 [11.5]
DSCP028-M250.......... 2.50mm.......... 41-502-1905, SAS 32740-25 TYP
DSCP028-M300.......... 3.00mm.......... 41-502-1906, SAS 32740-30
DSCP028-M350.......... 3.50mm.......... 41-502-1907, SAS 32740-35
DSCP028-M400.......... 4.00mm.......... 41-502-1908, SAS 32740-40
DSCP028-M450.......... 4.50mm.......... 41-502-1909, SAS 32740-45
DSCP028-M500.......... 5.00mm.......... 41-502-1910, SAS 32740-50
DSCP028-M550.......... 5.50mm.......... 41-502-1911, SAS 32740-55
DSCP028-M600.......... 6.00mm.......... 41-502-1912, SAS 32740-60
DSCP028-M650.......... 6.50mm.......... 41-502-1913, SAS 32740-65
DSCP028-M700.......... 7.00mm.......... 41-502-1914, SAS 32740-70
DSCP028-M750.......... 7.50mm.......... 41-502-1915, SAS 32740-75
DSCP028-M800.......... 8.00mm.......... 41-502-1916, SAS 32740-80

DSCP029 Series Spacers Ø0.34 [8.6] 2.00 [50.8]
TYP
DSC Part No. Thickness Other part numbers 1.06 [26.9]
0.34 [8.7] 0.49 [12.4]
DSCP029-M050.......... 0.50mm.......... 41-502-1921, SAS 42751-05 0.45 [11.5]
DSCP029-M100..........1.00mm.......... 41-502-1922, SAS 42751-10 TYP
DSCP029-M150..........1.50mm.......... 41-502-1923, SAS 42751-15
DSCP029-M200.......... 2.00mm.......... 41-502-1924, SAS 42751-20
DSCP029-M250.......... 2.50mm.......... 41-502-1925, SAS 42751-25
DSCP029-M300.......... 3.00mm.......... 41-502-1926, SAS 42751-30
DSCP029-M350.......... 3.50mm.......... 41-502-1927, SAS 42751-35
DSCP029-M400.......... 4.00mm.......... 41-502-1928, SAS 42751-40
DSCP029-M450.......... 4.50mm.......... 41-502-1929, SAS 42751-45
DSCP029-M500.......... 5.00mm.......... 41-502-1930, SAS 42751-50
DSCP029-M550.......... 5.50mm.......... 41-502-1931, SAS 42751-55
DSCP029-M600.......... 6.00mm.......... 41-502-1932, SAS 42751-60
DSCP029-M650.......... 6.50mm.......... 41-502-1933, SAS 42751-65
DSCP029-M700.......... 7.00mm.......... 41-502-1934, SAS 42751-70
DSCP029-M750.......... 7.50mm.......... 41-502-1935, SAS 42751-75
DSCP029-M800.......... 8.00mm.......... 41-502-1936, SAS 42751-80

DSCP030 Series Spacers 1.63 [41.3]

DSC Part No. Thickness Other part numbers Ø0.34 [8.6] 1.50 [38.1]
TYP 0.49 [12.4]
DSCP030-M050.......... 0.50mm.......... 41-502-1941, SAS 33840-05 0.45 [11.5]
DSCP030-M100..........1.00mm.......... 41-502-1942, SAS 33840-10 0.42 [10.7] TYP
DSCP030-M150..........1.50mm.......... 41-502-1943, SAS 33840-15
DSCP030-M200.......... 2.00mm.......... 41-502-1944, SAS 33840-20
DSCP030-M250.......... 2.50mm.......... 41-502-1945, SAS 33840-25
DSCP030-M300.......... 3.00mm.......... 41-502-1946, SAS 33840-30
DSCP030-M350.......... 3.50mm.......... 41-502-1947, SAS 33840-35
DSCP030-M400.......... 4.00mm.......... 41-502-1948, SAS 33840-40
DSCP030-M450.......... 4.50mm.......... 41-502-1949, SAS 33840-45
DSCP030-M500.......... 5.00mm.......... 41-502-1950, SAS 33840-50
DSCP030-M550.......... 5.50mm.......... 41-502-1951, SAS 33840-55
DSCP030-M600.......... 6.00mm.......... 41-502-1952, SAS 33840-60
DSCP030-M650.......... 6.50mm.......... 41-502-1953, SAS 33840-65
DSCP030-M700.......... 7.00mm.......... 41-502-1954, SAS 33840-70
DSCP030-M750.......... 7.50mm.......... 41-502-1955, SAS 33840-75
DSCP030-M800.......... 8.00mm.......... 41-502-1956, SAS 33840-80

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 44 2015

SPACERS

Drawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted

Most spacers are etched on the side with thickness

0.42 [10.7]

TYP

DSCP031 Series Spacers 0.34 [8.6] TYP 0.30 [7.6]

DSC Part No. Thickness Other part numbers

DSCP031-M050.......... 0.50mm.......... 41-502-1960, SAS 65163-05 0.45 [11.4] TYP
DSCP031-M100..........1.00mm.......... 41-502-1961, SAS 65163-10 2.00 [50.8]
DSCP031-M150..........1.50mm.......... 41-502-1962, SAS 65163-15
DSCP031-M200.......... 2.00mm.......... 41-502-1963, SAS 65163-20 0.40 [10.2] 1.66 [42.2]
DSCP031-M250.......... 2.50mm.......... 41-502-1964, SAS 65163-25 2.50 [63.5]
DSCP031-M300.......... 3.00mm.......... 41-502-1965, SAS 65163-30
DSCP031-M350.......... 3.50mm.......... 41-502-1966, SAS 65163-35
DSCP031-M400.......... 4.00mm.......... 41-502-1967, SAS 65163-40
DSCP031-M450.......... 4.50mm.......... 41-502-1968, SAS 65163-45
DSCP031-M500.......... 5.00mm.......... 41-502-1969, SAS 65163-50
DSCP031-M550.......... 5.50mm.......... 41-502-1970, SAS 65163-55
DSCP031-M600.......... 6.00mm.......... 41-502-1971, SAS 65163-60
DSCP031-M650.......... 6.50mm.......... 41-502-1972, SAS 65163-65
DSCP031-M700.......... 7.00mm.......... 41-502-1973, SAS 65163-70
DSCP031-M750.......... 7.50mm.......... 41-502-1974, SAS 65163-75
DSCP031-M800.......... 8.00mm.......... 41-502-1975, SAS 65163-80

DSCP032 Series Spacers 0.40 [10.2]
TYP
DSC Part No. Thickness Other part numbers

DSCP032-M050.......... 0.50mm.......... FS 21-09-0105 1.00 [25.4]
DSCP032-M100..........1.00mm.......... FS 21-09-0110 0.50 [12.7]
DSCP032-M150..........1.50mm.......... FS 21-09-0115
DSCP032-M200.......... 2.00mm..........FS 21-09-0120
DSCP032-M450.......... 4.50mm..........FS 21-09-0145

0.58 [14.6] 1.00 [25.4]

TYP
3.15 [80.0]

DSCP033 Series Spacers 0.40 [10.2]
TYP
DSC Part No. Thickness Other part numbers
0.50 [12.7]
DSCP033-M050.......... 0.50mm.......... FS 21-09-0305
DSCP033-M100..........1.00mm.......... FS 21-09-0310
DSCP033-M150..........1.50mm.......... FS 21-09-0315
DSCP033-M200.......... 2.00mm..........FS 21-09-0320
DSCP033-M450.......... 4.50mm..........FS 21-09-0345

1.00 [25.4]

0.40 [10.2] 0.60
[15.2] TYP

2.00 [50.8]

DSCP034 Series Spacers 4.33 [110.0]
0.41 [10.5] TYP
DSC Part No. Thickness Other part #s DSC Part No. Thickness Other part #s
1.38 [35.0]
DSCP034-M300.......... 3.00mm.......... ACS330S DSCP034-M640.......... 6.40mm.......... ACS364S TYP
DSCP034-M320.......... 3.20mm.......... ACS332S DSCP034-M660.......... 6.60mm.......... ACS366S
DSCP034-M340.......... 3.40mm.......... ACS334S DSCP034-M680.......... 6.80mm.......... ACS368S 4.33 [110.0]
DSCP034-M360.......... 3.60mm.......... ACS336S DSCP034-M700.......... 7.00mm.......... ACS370S
DSCP034-M380.......... 3.80mm.......... ACS338S
DSCP034-M400.......... 4.00mm.......... ACS340S 1.58 [40.0]
DSCP034-M420.......... 4.20mm.......... ACS342S
DSCP034-M440.......... 4.40mm.......... ACS344S 0.79 [20.0] 0.79 [20.0]
DSCP034-M460.......... 4.60mm.......... ACS346S
DSCP034-M480.......... 4.80mm.......... ACS348S 2015
DSCP034-M500.......... 5.00mm.......... ACS350S
DSCP034-M520.......... 5.20mm.......... ACS352S
DSCP034-M540.......... 5.40mm.......... ACS354S
DSCP034-M560.......... 5.60mm.......... ACS356S
DSCP034-M580.......... 5.80mm.......... ACS358S
DSCP034-M600.......... 6.00mm.......... ACS360S
DSCP034-M620.......... 6.20mm.......... ACS362S

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 45

SPACERS

Drawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted

Most spacers are etched on the side with thickness

DSCP035 Series Spacers

DSC Part No. Thickness Other part #s DSC Part No. Thickness Other part #s

DSCP035-M300.......... 3.00mm.......... ACS630 DSCP035-M640.......... 6.40mm.......... ACS664 Ø0.75 [19.0]
DSCP035-M320.......... 3.20mm.......... ACS632 DSCP035-M660.......... 6.60mm.......... ACS666 (4) PLCS
DSCP035-M340.......... 3.40mm.......... ACS634 DSCP035-M680.......... 6.80mm.......... ACS668
DSCP035-M360.......... 3.60mm.......... ACS636 DSCP035-M700.......... 7.00mm.......... ACS670 2.56 [65.0]
DSCP035-M380.......... 3.80mm.......... ACS638
DSCP035-M400.......... 4.00mm.......... ACS640 0.69 [17.5]
DSCP035-M420.......... 4.20mm.......... ACS642
DSCP035-M440.......... 4.40mm.......... ACS644 3.94 [100.0]
DSCP035-M460.......... 4.60mm.......... ACS646
DSCP035-M480.......... 4.80mm.......... ACS648
DSCP035-M500.......... 5.00mm.......... ACS650
DSCP035-M520.......... 5.20mm.......... ACS652
DSCP035-M540.......... 5.40mm.......... ACS654
DSCP035-M560.......... 5.60mm.......... ACS656
DSCP035-M580.......... 5.80mm.......... ACS658
DSCP035-M600.......... 6.00mm.......... ACS660
DSCP035-M620.......... 6.20mm.......... ACS662

2.76 [70.0]

2.56 [65.0]

1.38 [35.0]

0.69 [17.5]

Ø0.41 [10.5]
(4) PLCS

0.79 [20.0] 1.18 [30.0] 1.18 [30.0]
3.94 [100.0]

DSCP036 Series Spacers Ø0.35 [9.0]

DSC Part No. Thickness Other part #s DSC Part No. Thickness Other part #s TYP 1.81 [46.0]

DSCP036-M025.......... 0.25mm.......... DSCP036-M560.......... 5.60mm.......... ASP356N 0.79 [20.0]
DSCP036-M050.......... 0.50mm.......... 0.59 [15.0]
DSCP036-M100..........1.00mm.......... DSCP036-M580.......... 5.80mm.......... ASP358N
DSCP036-M200.......... 2.00mm.......... TYP
DSCP036-M300.......... 3.00mm.......... ASP330N DSCP036-M600.......... 6.00mm.......... ASP360N
DSCP036-M320.......... 3.20mm.......... ASP332N
DSCP036-M340.......... 3.40mm.......... ASP334N DSCP036-M620.......... 6.20mm.......... ASP362N
DSCP036-M360.......... 3.60mm.......... ASP336N
DSCP036-M380.......... 3.80mm.......... ASP338N DSCP036-M640.......... 6.40mm.......... ASP364N
DSCP036-M400.......... 4.00mm.......... ASP340N
DSCP036-M420.......... 4.20mm.......... ASP342N DSCP036-M660.......... 6.60mm.......... ASP366N
DSCP036-M440.......... 4.40mm.......... ASP344N
DSCP036-M460.......... 4.60mm.......... ASP346N DSCP036-M680.......... 6.80mm.......... ASP368N
DSCP036-M480.......... 4.80mm.......... ASP348N
DSCP036-M500.......... 5.00mm.......... ASP350N DSCP036-M700.......... 7.00mm.......... ASP370N
DSCP036-M520.......... 5.20mm.......... ASP352N
DSCP036-M540.......... 5.40mm.......... ASP354N 0.31 [8.0]

DSCP037 Series Spacers Ø0.35 [9.0] TYP

DSC Part No. Thickness Other part #s DSC Part No. Thickness Other part #s

DSCP037-M025.......... 0.25mm.......... DSCP037-M560.......... 5.60mm.......... ASP456N 2.40 [61.0]

DSCP037-M050.......... 0.50mm.......... DSCP037-M580.......... 5.80mm.......... ASP458N

DSCP037-M100..........1.00mm.......... DSCP037-M600.......... 6.00mm.......... ASP460N

DSCP037-M200.......... 2.00mm.......... DSCP037-M620.......... 6.20mm.......... ASP462N

DSCP037-M300.......... 3.00mm.......... ASP430N DSCP037-M640.......... 6.40mm.......... ASP464N

DSCP037-M320.......... 3.20mm.......... ASP432N DSCP037-M660.......... 6.60mm.......... ASP466N

DSCP037-M340.......... 3.40mm.......... ASP434N DSCP037-M680.......... 6.80mm.......... ASP468N

DSCP037-M360.......... 3.60mm.......... ASP436N DSCP037-M700.......... 7.00mm.......... ASP470N 0.79 [20.0]

DSCP037-M380.......... 3.80mm.......... ASP438N 2015

DSCP037-M400.......... 4.00mm.......... ASP440N

DSCP037-M420.......... 4.20mm.......... ASP442N

DSCP037-M440.......... 4.40mm.......... ASP444N

DSCP037-M460.......... 4.60mm.......... ASP446N

DSCP037-M480.......... 4.80mm.......... ASP448N 0.31 [8.0] 0.59 [15.0] TYP
DSCP037-M500.......... 5.00mm.......... ASP450N

DSCP037-M520.......... 5.20mm.......... ASP452N

DSCP037-M540.......... 5.40mm.......... ASP454N

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 46

SPACERS

Drawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted

Most spacers are etched on the side with thickness

Ø0.35 [9.0] 1.97 [50.0]
TYP

DSCP038 Series Spacers

DSC Part No. Thickness Other part #s DSC Part No. Thickness Other part #s

DSCP038-M025.......... 0.25mm.......... DSCP038-M560.......... 5.60mm.......... ASP656N 2.28 [58.0] 1.57 [40.0]
DSCP038-M050.......... 0.50mm.......... DSCP038-M580.......... 5.80mm.......... ASP658N 0.39 [10.0]
DSCP038-M100..........1.00mm.......... DSCP038-M600.......... 6.00mm.......... ASP660N 0.35 [9.0]
DSCP038-M200.......... 2.00mm.......... DSCP038-M620.......... 6.20mm.......... ASP662N 0.59 [15.0]
DSCP038-M300.......... 3.00mm.......... ASP630N DSCP038-M640.......... 6.40mm.......... ASP664N
DSCP038-M320.......... 3.20mm.......... ASP632N DSCP038-M660.......... 6.60mm.......... ASP666N TYP
DSCP038-M340.......... 3.40mm.......... ASP634N DSCP038-M680.......... 6.80mm.......... ASP668N
DSCP038-M360.......... 3.60mm.......... ASP636N DSCP038-M700.......... 7.00mm.......... ASP670N
DSCP038-M380.......... 3.80mm.......... ASP638N
DSCP038-M400.......... 4.00mm.......... ASP640N
DSCP038-M420.......... 4.20mm.......... ASP642N
DSCP038-M440.......... 4.40mm.......... ASP644N
DSCP038-M460.......... 4.60mm.......... ASP646N
DSCP038-M480.......... 4.80mm.......... ASP648N
DSCP038-M500.......... 5.00mm.......... ASP650N
DSCP038-M520.......... 5.20mm.......... ASP652N
DSCP038-M540.......... 5.40mm.......... ASP654N

DSCP039 Series Spacers 1.81 [46.0]

DSC Part No. Thickness Other part numbers Ø0.41 [10.4] 0.98 [25.0]
TYP
DSCP039-M400.......... 4.00mm.......... 56ZF28047-01 0.59 [15.0]
DSCP039-M425.......... 4.25mm.......... 56ZF28047-02 0.32 [8.0] TYP
DSCP039-M450.......... 4.50mm.......... 56ZF28047-03
DSCP039-M475.......... 4.75mm.......... 56ZF28047-04 2.40 [61.0]
DSCP039-M500.......... 5.00mm.......... 56ZF28047-05
DSCP039-M525.......... 5.25mm.......... 56ZF28047-06
DSCP039-M550.......... 5.50mm.......... 56ZF28047-07
DSCP039-M575.......... 5.75mm.......... 56ZF28047-08
DSCP039-M600.......... 6.00mm.......... 56ZF28047-09
DSCP039-M625.......... 6.25mm.......... 56ZF28047-10
DSCP039-M650.......... 6.50mm.......... 56ZF28047-11
DSCP039-M675.......... 6.75mm.......... 56ZF28047-12
DSCP039-M700.......... 7.00mm.......... 56ZF28047-13
DSCP039-M725.......... 7.25mm.......... 56ZF28047-14
DSCP039-M750.......... 7.50mm.......... 56ZF28047-15
DSCP039-M775.......... 7.75mm.......... 56ZF28047-16
DSCP039-M800.......... 8.00mm.......... 56ZF28047-17

DSCP040 Series Spacers Ø0.41 [10.4]
TYP
DSC Part No. Thickness Other part numbers
0.31 [8.0]
DSCP040-M400.......... 4.00mm.......... 56ZF28048-01 0.98 [25.0]
DSCP040-M425.......... 4.25mm.......... 56ZF28048-02
DSCP040-M450.......... 4.50mm.......... 56ZF28048-03 0.59 [15.0]
DSCP040-M475.......... 4.75mm.......... 56ZF28048-04 TYP
DSCP040-M500.......... 5.00mm.......... 56ZF28048-05
DSCP040-M525.......... 5.25mm.......... 56ZF28048-06
DSCP040-M550.......... 5.50mm.......... 56ZF28048-07
DSCP040-M575.......... 5.75mm.......... 56ZF28048-08
DSCP040-M600.......... 6.00mm.......... 56ZF28048-09
DSCP040-M625.......... 6.25mm.......... 56ZF28048-10
DSCP040-M650.......... 6.50mm.......... 56ZF28048-11
DSCP040-M675.......... 6.75mm.......... 56ZF28048-12
DSCP040-M700.......... 7.00mm.......... 56ZF28048-13
DSCP040-M725.......... 7.25mm.......... 56ZF28048-14
DSCP040-M750.......... 7.50mm.......... 56ZF28048-15
DSCP040-M775.......... 7.75mm.......... 56ZF28048-16
DSCP040-M800.......... 8.00mm.......... 56ZF28048-17

DSCP041 Series Spacers Ø0.41 [10.4] 1.77 [45.0]
TYP 1.00 [25.4]
DSC Part No. Thickness Other part numbers
0.38 [9.7] 1.00 [25.4]
DSCP041-M400.......... 4.00mm.......... 56ZF28049-01
DSCP041-M425.......... 4.25mm.......... 56ZF28049-02
DSCP041-M450.......... 4.50mm.......... 56ZF28049-03
DSCP041-M475.......... 4.75mm.......... 56ZF28049-04
DSCP041-M500.......... 5.00mm.......... 56ZF28049-05
DSCP041-M525.......... 5.25mm.......... 56ZF28049-06
DSCP041-M550.......... 5.50mm.......... 56ZF28049-07
DSCP041-M575.......... 5.75mm.......... 56ZF28049-08
DSCP041-M600.......... 6.00mm.......... 56ZF28049-09
DSCP041-M625.......... 6.25mm.......... 56ZF28049-10
DSCP041-M650.......... 6.50mm.......... 56ZF28049-11
DSCP041-M675.......... 6.75mm.......... 56ZF28049-12
DSCP041-M700.......... 7.00mm.......... 56ZF28049-13
DSCP041-M725.......... 7.25mm.......... 56ZF28049-14
DSCP041-M750.......... 7.50mm.......... 56ZF28049-15
DSCP041-M775.......... 7.75mm.......... 56ZF28049-16
DSCP041-M800.......... 8.00mm.......... 56ZF28049-17

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 47 2015

SPACERS

Drawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted

Most spacers are etched on the side with thickness

DSCP042 Series Spacers Ø0.41 [10.4] 2.75 [69.9]
TYP
DSC Part No. Thickness Other part numbers 1.00 [25.4]
0.38 [9.7] 1.00 [25.4]
DSCP042-M400.......... 4.00mm.......... 56ZF28050-01
DSCP042-M425.......... 4.25mm.......... 56ZF28050-02 TYP
DSCP042-M450.......... 4.50mm.......... 56ZF28050-03
DSCP042-M475.......... 4.75mm.......... 56ZF28050-04
DSCP042-M500.......... 5.00mm.......... 56ZF28050-05
DSCP042-M525.......... 5.25mm.......... 56ZF28050-06
DSCP042-M550.......... 5.50mm.......... 56ZF28050-07
DSCP042-M575.......... 5.75mm.......... 56ZF28050-08
DSCP042-M600.......... 6.00mm.......... 56ZF28050-09
DSCP042-M625.......... 6.25mm.......... 56ZF28050-10
DSCP042-M650.......... 6.50mm.......... 56ZF28050-11
DSCP042-M675.......... 6.75mm.......... 56ZF28050-12
DSCP042-M700.......... 7.00mm.......... 56ZF28050-13
DSCP042-M725.......... 7.25mm.......... 56ZF28050-14
DSCP042-M750.......... 7.50mm.......... 56ZF28050-15
DSCP042-M775.......... 7.75mm.......... 56ZF28050-16
DSCP042-M800.......... 8.00mm.......... 56ZF28050-17

DSCP043 Series Spacers 2.48 [63.0]
1.77 [45.0]
DSC Part No. Thickness Other part numbers Ø0.41 [10.4]
TYP
DSCP043-M400.......... 4.00mm.......... 56ZF28466-01 1.96 [49.8] 0.60 [15.2]
DSCP043-M425.......... 4.25mm.......... 56ZF28466-02 0.36 [9.1]
DSCP043-M450.......... 4.50mm.......... 56ZF28466-03 TYP
DSCP043-M475.......... 4.75mm.......... 56ZF28466-04
DSCP043-M500.......... 5.00mm.......... 56ZF28466-05 0.39 [9.9]
DSCP043-M525.......... 5.25mm.......... 56ZF28466-06
DSCP043-M550.......... 5.50mm.......... 56ZF28466-07
DSCP043-M575.......... 5.75mm.......... 56ZF28466-08
DSCP043-M600.......... 6.00mm.......... 56ZF28466-09
DSCP043-M625.......... 6.25mm.......... 56ZF28466-10
DSCP043-M650.......... 6.50mm.......... 56ZF28466-11
DSCP043-M675.......... 6.75mm.......... 56ZF28466-12
DSCP043-M700.......... 7.00mm.......... 56ZF28466-13
DSCP043-M725.......... 7.25mm.......... 56ZF28466-14
DSCP043-M750.......... 7.50mm.......... 56ZF28466-15
DSCP043-M775.......... 7.75mm.......... 56ZF28466-16
DSCP043-M800.......... 8.00mm.......... 56ZF28466-17

DSCP044 Series Spacers 5.00 [127.0] Ø0.41 [10.4]
4.13 [104.9] TYP
DSC Part No. Thickness Other part numbers
0.71 [18.0]
DSCP044-M400.......... 4.00mm.......... 56ZF28467-01 2.25 [57.2] TYP
DSCP044-M425.......... 4.25mm.......... 56ZF28467-02 0.47 [11.9]
DSCP044-M450.......... 4.50mm.......... 56ZF28467-03 0.41 [10.4]
DSCP044-M475.......... 4.75mm.......... 56ZF28467-04
DSCP044-M500.......... 5.00mm.......... 56ZF28467-05
DSCP044-M525.......... 5.25mm.......... 56ZF28467-06
DSCP044-M550.......... 5.50mm.......... 56ZF28467-07
DSCP044-M575.......... 5.75mm.......... 56ZF28467-08
DSCP044-M600.......... 6.00mm.......... 56ZF28467-09
DSCP044-M625.......... 6.25mm.......... 56ZF28467-10
DSCP044-M650.......... 6.50mm.......... 56ZF28467-11
DSCP044-M675.......... 6.75mm.......... 56ZF28467-12
DSCP044-M700.......... 7.00mm.......... 56ZF28467-13
DSCP044-M725.......... 7.25mm.......... 56ZF28467-14
DSCP044-M750.......... 7.50mm.......... 56ZF28467-15
DSCP044-M775.......... 7.75mm.......... 56ZF28467-16
DSCP044-M800.......... 8.00mm.......... 56ZF28467-17

DSCP045 Series Spacers Ø0.34 [8.6] 1.50 [38.1]
TYP
DSC Part No. Thickness Other part numbers 1.00 [25.4]
0.30 [7.6]
DSCP045-M400.......... 4.00mm.......... 56ZF27464-01 0.45 [11.4]
DSCP045-M425.......... 4.25mm.......... 56ZF27464-02 TYP
DSCP045-M450.......... 4.50mm.......... 56ZF27464-03
DSCP045-M475.......... 4.75mm.......... 56ZF27464-04
DSCP045-M500.......... 5.00mm.......... 56ZF27464-05
DSCP045-M525.......... 5.25mm.......... 56ZF27464-06
DSCP045-M550.......... 5.50mm.......... 56ZF27464-07
DSCP045-M575.......... 5.75mm.......... 56ZF27464-08
DSCP045-M600.......... 6.00mm.......... 56ZF27464-09
DSCP045-M625.......... 6.25mm.......... 56ZF27464-10
DSCP045-M650.......... 6.50mm.......... 56ZF27464-11
DSCP045-M675.......... 6.75mm.......... 56ZF27464-12
DSCP045-M700.......... 7.00mm.......... 56ZF27464-13
DSCP045-M725.......... 7.25mm.......... 56ZF27464-14
DSCP045-M750.......... 7.50mm.......... 56ZF27464-15
DSCP045-M775.......... 7.75mm.......... 56ZF27464-16
DSCP045-M800.......... 8.00mm.......... 56ZF27464-17

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 48 2015

SPACERS

Drawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted

Most spacers are etched on the side with thickness

DSCP046 Series Spacers Ø0.34 [8.6] 1.88 [47.8]
TYP
DSC Part No. Thickness Other part numbers 1.00 [25.4]
0.27 [6.9]
DSCP046-M400.......... 4.00mm.......... 56ZF27462-01 0.45 [11.4]
DSCP046-M425.......... 4.25mm.......... 56ZF27462-02 TYP
DSCP046-M450.......... 4.50mm.......... 56ZF27462-03
DSCP046-M475.......... 4.75mm.......... 56ZF27462-04
DSCP046-M500.......... 5.00mm.......... 56ZF27462-05
DSCP046-M525.......... 5.25mm.......... 56ZF27462-06
DSCP046-M550.......... 5.50mm.......... 56ZF27462-07
DSCP046-M575.......... 5.75mm.......... 56ZF27462-08
DSCP046-M600.......... 6.00mm.......... 56ZF27462-09
DSCP046-M625.......... 6.25mm.......... 56ZF27462-10
DSCP046-M650.......... 6.50mm.......... 56ZF27462-11
DSCP046-M675.......... 6.75mm.......... 56ZF27462-12
DSCP046-M700.......... 7.00mm.......... 56ZF27462-13
DSCP046-M725.......... 7.25mm.......... 56ZF27462-14
DSCP046-M750.......... 7.50mm.......... 56ZF27462-15
DSCP046-M775.......... 7.75mm.......... 56ZF27462-16
DSCP046-M800.......... 8.00mm.......... 56ZF27462-17

DSCP047 Series Spacers

DSC Part No. Thickness Other part numbers

DSCP047-M400.......... 4.00mm.......... 56ZF27461-01 0.50 [12.7] 6.00 [152.4] 1.00 [25.4]
DSCP047-M425.......... 4.25mm.......... 56ZF27461-02
DSCP047-M450.......... 4.50mm.......... 56ZF27461-03 1.00 [25.4] Ø0.41 [10.4]
DSCP047-M475.......... 4.75mm.......... 56ZF27461-04 TYP TYP
DSCP047-M500.......... 5.00mm.......... 56ZF27461-05
DSCP047-M525.......... 5.25mm.......... 56ZF27461-06
DSCP047-M550.......... 5.50mm.......... 56ZF27461-07
DSCP047-M575.......... 5.75mm.......... 56ZF27461-08
DSCP047-M600.......... 6.00mm.......... 56ZF27461-09
DSCP047-M625.......... 6.25mm.......... 56ZF27461-10
DSCP047-M650.......... 6.50mm.......... 56ZF27461-11
DSCP047-M675.......... 6.75mm.......... 56ZF27461-12
DSCP047-M700.......... 7.00mm.......... 56ZF27461-13
DSCP047-M725.......... 7.25mm.......... 56ZF27461-14
DSCP047-M750.......... 7.50mm.......... 56ZF27461-15
DSCP047-M775.......... 7.75mm.......... 56ZF27461-16
DSCP047-M800.......... 8.00mm.......... 56ZF27461-17

DSCP048 Series Spacers 5.00 [127.0]

DSC Part No. Thickness Other part numbers 4.00 [101.6]

DSCP048-M400.......... 4.00mm.......... 56ZF27463-01 2.00 [50.8] 2.50 [63.5] Ø0.34 [8.6]
DSCP048-M425.......... 4.25mm.......... 56ZF27463-02 0.50 [12.7] TYP
DSCP048-M450.......... 4.50mm.......... 56ZF27463-03 1.75 [44.5]
DSCP048-M475.......... 4.75mm.......... 56ZF27463-04 0.63 [15.9]
DSCP048-M500.......... 5.00mm.......... 56ZF27463-05 TYP
DSCP048-M525.......... 5.25mm.......... 56ZF27463-06
DSCP048-M550.......... 5.50mm.......... 56ZF27463-07 0.38 [9.5]
DSCP048-M575.......... 5.75mm.......... 56ZF27463-08
DSCP048-M600.......... 6.00mm.......... 56ZF27463-09 0.45 [11.4]
DSCP048-M625.......... 6.25mm.......... 56ZF27463-10 TYP
DSCP048-M650.......... 6.50mm.......... 56ZF27463-11
DSCP048-M675.......... 6.75mm.......... 56ZF27463-12 1.00 [25.4]
DSCP048-M700.......... 7.00mm.......... 56ZF27463-13
DSCP048-M725.......... 7.25mm.......... 56ZF27463-14
DSCP048-M750.......... 7.50mm.......... 56ZF27463-15
DSCP048-M775.......... 7.75mm.......... 56ZF27463-16
DSCP048-M800.......... 8.00mm.......... 56ZF27463-17

DSCP049 Series Spacers Ø0.34 [8.6]

DSC Part No. Thickness Other part numbers TYP
1.75 [44.5]
DSCP049-M400.......... 4.00mm.......... 56ZF27465-01 0.38 [9.5]
DSCP049-M425.......... 4.25mm.......... 56ZF27465-02
DSCP049-M450.......... 4.50mm.......... 56ZF27465-03
DSCP049-M475.......... 4.75mm.......... 56ZF27465-04
DSCP049-M500.......... 5.00mm.......... 56ZF27465-05
DSCP049-M525.......... 5.25mm.......... 56ZF27465-06
DSCP049-M550.......... 5.50mm.......... 56ZF27465-07
DSCP049-M575.......... 5.75mm.......... 56ZF27465-08
DSCP049-M600.......... 6.00mm.......... 56ZF27465-09
DSCP049-M625.......... 6.25mm.......... 56ZF27465-10
DSCP049-M650.......... 6.50mm.......... 56ZF27465-11
DSCP049-M675.......... 6.75mm.......... 56ZF27465-12
DSCP049-M700.......... 7.00mm.......... 56ZF27465-13
DSCP049-M725.......... 7.25mm.......... 56ZF27465-14
DSCP049-M750.......... 7.50mm.......... 56ZF27465-15
DSCP049-M775.......... 7.75mm.......... 56ZF27465-16
DSCP049-M800.......... 8.00mm.......... 56ZF27465-17

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 49 2015

SPACERS

Drawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted

Most spacers are etched on the side with thickness

DSCP050 Series Spacers

DSC Part No. Thickness Other part numbers Ø0.41 [10.5]

DSCP050-M025.......... 0.25mm.......... ASP302

DSCP050-M050.......... 0.50mm.......... ASP305 TYP
DSCP050-M100..........1.00mm.......... ASP310

DSCP050-M200.......... 2.00mm.......... ASP320 1.81 [46.0]

DSCP050-M300.......... 3.00mm.......... ASP330, FSD 41294-51, SP1-30, 41-502-2200, 56ZF28047-101 0.59 [15.0]
TYP
DSCP050-M320.......... 3.20mm.......... ASP332, FSD 41294-52, SP1-32, 41-502-2201, 56ZF28047-102

DSCP050-M340.......... 3.40mm.......... ASP334, FSD 41294-53, SP1-34, 41-502-2202, 56ZF28047-103

DSCP050-M360.......... 3.60mm.......... ASP336, FSD 41294-54, SP1-36, 41-502-2203, 56ZF28047-104

DSCP050-M380.......... 3.80mm.......... ASP338, FSD 41294-55, SP1-38, 41-502-2204, 56ZF28047-105

DSCP050-M400.......... 4.00mm.......... ASP340, FSD 41294-56, SP1-40, 41-502-2205, 56ZF28047-106

DSCP050-M420.......... 4.20mm.......... ASP342, FSD 41294-57, SP1-42, 41-502-2206, 56ZF28047-107

DSCP050-M440.......... 4.40mm.......... ASP344, FSD 41294-58, SP1-44, 41-502-2207, 56ZF28047-108 0.98 [25.0]
DSCP050-M460.......... 4.60mm.......... ASP346, FSD 41294-59, SP1-46, 41-502-2208, 56ZF28047-109

DSCP050-M480.......... 4.80mm.......... ASP348, FSD 41294-60, SP1-48, 41-502-2209, 56ZF28047-110

DSCP050-M500.......... 5.00mm.......... ASP350, FSD 41294-61, SP1-50, 41-502-2210, 56ZF28047-111

DSCP050-M520.......... 5.20mm.......... ASP352, FSD 41294-62, SP1-52, 41-502-2211, 56ZF28047-112

DSCP050-M540.......... 5.40mm.......... ASP354, FSD 41294-63, SP1-54, 41-502-2212, 56ZF28047-113

DSCP050-M560.......... 5.60mm.......... ASP356, FSD 41294-64, SP1-56, 41-502-2213, 56ZF28047-114

DSCP050-M580.......... 5.80mm.......... ASP358, FSD 41294-65, SP1-58, 41-502-2214, 56ZF28047-115 0.32 [8.0]
DSCP050-M600.......... 6.00mm.......... ASP360, FSD 41294-66, SP1-60, 41-502-2215, 56ZF28047-116

DSCP050-M620.......... 6.20mm.......... ASP362, FSD 41294-67, SP1-62, 41-502-2216, 56ZF28047-117

DSCP050-M640.......... 6.40mm.......... ASP364, FSD 41294-68, SP1-64, 41-502-2217, 56ZF28047-118

DSCP050-M660.......... 6.60mm.......... ASP366, FSD 41294-69, SP1-66, 41-502-2218, 56ZF28047-119

DSCP050-M680.......... 6.80mm.......... ASP368, FSD 41294-70, SP1-68, 41-502-2219, 56ZF28047-120

DSCP050-M700.......... 7.00mm.......... ASP370, FSD 41294-71, SP1-70, 41-502-2220, 56ZF28047-121

DSCP051 Series Spacers

DSC Part No. Thickness Other part numbers Ø0.41 [10.5]
TYP
DSCP051-M025.......... 0.25mm.......... ASP402
DSCP051-M050.......... 0.50mm.......... ASP405 0.98 [25.0]
DSCP051-M100..........1.00mm.......... ASP410
DSCP051-M200.......... 2.00mm.......... ASP420 0.59 [15.0] 0.31 [8.0]
DSCP051-M300.......... 3.00mm.......... ASP430, FSD 41295-51, SP2-30, 41-502-2221, 56ZF28048-101 TYP
DSCP051-M320.......... 3.20mm.......... ASP432, FSD 41295-52, SP2-32, 41-502-2222, 56ZF28048-102
DSCP051-M340.......... 3.40mm.......... ASP434, FSD 41295-53, SP2-34, 41-502-2223, 56ZF28048-103 2.40 [61.0]
DSCP051-M360.......... 3.60mm.......... ASP436, FSD 41295-54, SP2-36, 41-502-2224, 56ZF28048-104
DSCP051-M380.......... 3.80mm.......... ASP438, FSD 41295-55, SP2-38, 41-502-2225, 56ZF28048-105
DSCP051-M400.......... 4.00mm.......... ASP440, FSD 41295-56, SP2-40, 41-502-2226, 56ZF28048-106
DSCP051-M420.......... 4.20mm.......... ASP442, FSD 41295-57, SP2-42, 41-502-2227, 56ZF28048-107
DSCP051-M440.......... 4.40mm.......... ASP444, FSD 41295-58, SP2-44, 41-502-2228, 56ZF28048-108
DSCP051-M460.......... 4.60mm.......... ASP446, FSD 41295-59, SP2-46, 41-502-2229, 56ZF28048-109
DSCP051-M480.......... 4.80mm.......... ASP448, FSD 41295-60, SP2-48, 41-502-2230, 56ZF28048-110
DSCP051-M500.......... 5.00mm.......... ASP450, FSD 41295-61, SP2-50, 41-502-2231, 56ZF28048-111
DSCP051-M520.......... 5.20mm.......... ASP452, FSD 41295-62, SP2-52, 41-502-2232, 56ZF28048-112
DSCP051-M540.......... 5.40mm.......... ASP454, FSD 41295-63, SP2-54, 41-502-2233, 56ZF28048-113
DSCP051-M560.......... 5.60mm.......... ASP456, FSD 41295-64, SP2-56, 41-502-2234, 56ZF28048-114
DSCP051-M580.......... 5.80mm.......... ASP458, FSD 41295-65, SP2-58, 41-502-2235, 56ZF28048-115
DSCP051-M600.......... 6.00mm.......... ASP460, FSD 41295-66, SP2-60, 41-502-2236, 56ZF28048-116
DSCP051-M620.......... 6.20mm.......... ASP462, FSD 41295-67, SP2-62, 41-502-2237, 56ZF28048-117
DSCP051-M640.......... 6.40mm.......... ASP464, FSD 41295-68, SP2-64, 41-502-2238, 56ZF28048-118
DSCP051-M660.......... 6.60mm.......... ASP466, FSD 41295-69, SP2-66, 41-502-2239, 56ZF28048-119
DSCP051-M680.......... 6.80mm.......... ASP468, FSD 41295-70, SP2-68, 41-502-2240, 56ZF28048-120
DSCP051-M700.......... 7.00mm.......... ASP470, FSD 41295-71, SP2-70, 41-502-2241, 56ZF28048-121

DSCP052 Series Spacers

DSC Part No. Thickness Other part numbers

DSCP052-M025.......... 0.25mm.......... ASP502, DSC502 0.98 [25.0] Ø0.41 [10.5]
DSCP052-M050.......... 0.50mm.......... ASP505, DSC505 0.31 [8.0] TYP
DSCP052-M100..........1.00mm.......... ASP510, DSC510
DSCP052-M200.......... 2.00mm.......... ASP520, DSC520 0.59 [15.0]
DSCP052-M300.......... 3.00mm.......... ASP530, DSC530 TYP
DSCP052-M320.......... 3.20mm.......... ASP532, DSC532
DSCP052-M340.......... 3.40mm.......... ASP534, DSC534 2.99 [76.0]
DSCP052-M360.......... 3.60mm.......... ASP536, DSC536
DSCP052-M380.......... 3.80mm.......... ASP538, DSC538
DSCP052-M400.......... 4.00mm.......... ASP540, DSC540
DSCP052-M420.......... 4.20mm.......... ASP542, DSC542
DSCP052-M440.......... 4.40mm.......... ASP544, DSC544
DSCP052-M460.......... 4.60mm.......... ASP546, DSC546
DSCP052-M480.......... 4.80mm.......... ASP548, DSC548
DSCP052-M500.......... 5.00mm.......... ASP550, DSC550
DSCP052-M520.......... 5.20mm.......... ASP552, DSC552
DSCP052-M540.......... 5.40mm.......... ASP554, DSC554
DSCP052-M560.......... 5.60mm.......... ASP556, DSC556
DSCP052-M580.......... 5.80mm.......... ASP558, DSC558
DSCP052-M600.......... 6.00mm.......... ASP560, DSC560
DSCP052-M620.......... 6.20mm.......... ASP562, DSC562
DSCP052-M640.......... 6.40mm.......... ASP564, DSC564
DSCP052-M660.......... 6.60mm.......... ASP566, DSC566
DSCP052-M680.......... 6.80mm.......... ASP568, DSC568
DSCP052-M700.......... 7.00mm.......... ASP570, DSC570

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 50 2015