Douglas Stamping Company 2016 Catalog

SPACERS

Drawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted

Most spacers are etched on the side with thickness

DSCP053 Series Spacers

DSC Part No. Thickness Other part numbers Ø0.41 [10.5]
TYP
DSCP053-M025.......... 0.25mm.......... ASP602
DSCP053-M050.......... 0.50mm.......... ASP605 0.59 [15.0]
DSCP053-M100..........1.00mm.......... ASP610 TYP
DSCP053-M200.......... 2.00mm.......... ASP620
DSCP053-M300.......... 3.00mm.......... ASP630, FSD 41296-51, SP3-30, 41-502-2242, 56ZF28066-101 1.97 [50.0]
DSCP053-M320.......... 3.20mm.......... ASP632, FSD 41296-52, SP3-32, 41-502-2243, 56ZF28066-102
DSCP053-M340.......... 3.40mm.......... ASP634, FSD 41296-53, SP3-34, 41-502-2244, 56ZF28066-103 0.39 [10.0]
DSCP053-M360.......... 3.60mm.......... ASP636, FSD 41296-54, SP3-36, 41-502-2245, 56ZF28066-104
DSCP053-M380.......... 3.80mm.......... ASP638, FSD 41296-55, SP3-38, 41-502-2246, 56ZF28066-105 0.35 [9.0]
DSCP053-M400.......... 4.00mm.......... ASP640, FSD 41296-56, SP3-40, 41-502-2247, 56ZF28066-106 1.77 [45.0]
DSCP053-M420.......... 4.20mm.......... ASP642, FSD 41296-57, SP3-42, 41-502-2248, 56ZF28066-107 2.48 [63.0]
DSCP053-M440.......... 4.40mm.......... ASP644, FSD 41296-58, SP3-44, 41-502-2249, 56ZF28066-108
DSCP053-M460.......... 4.60mm.......... ASP646, FSD 41296-59, SP3-46, 41-502-2250, 56ZF28066-109
DSCP053-M480.......... 4.80mm.......... ASP648, FSD 41296-60, SP3-48, 41-502-2251, 56ZF28066-110
DSCP053-M500.......... 5.00mm.......... ASP650, FSD 41296-61, SP3-50, 41-502-2252, 56ZF28066-111
DSCP053-M520.......... 5.20mm.......... ASP652, FSD 41296-62, SP3-52, 41-502-2253, 56ZF28066-112
DSCP053-M540.......... 5.40mm.......... ASP654, FSD 41296-63, SP3-54, 41-502-2254, 56ZF28066-113
DSCP053-M560.......... 5.60mm.......... ASP656, FSD 41296-64, SP3-56, 41-502-2255, 56ZF28066-114
DSCP053-M580.......... 5.80mm.......... ASP658, FSD 41296-65, SP3-58, 41-502-2256, 56ZF28066-115
DSCP053-M600.......... 6.00mm.......... ASP660, FSD 41296-66, SP3-60, 41-502-2257, 56ZF28066-116
DSCP053-M620.......... 6.20mm.......... ASP662, FSD 41296-67, SP3-62, 41-502-2258, 56ZF28066-117
DSCP053-M640.......... 6.40mm.......... ASP664, FSD 41296-68, SP3-64, 41-502-2259, 56ZF28066-118
DSCP053-M660.......... 6.60mm.......... ASP666, FSD 41296-69, SP3-66, 41-502-2260, 56ZF28066-119
DSCP053-M680.......... 6.80mm.......... ASP668, FSD 41296-70, SP3-68, 41-502-2261, 56ZF28066-120
DSCP053-M700.......... 7.00mm.......... ASP670, FSD 41296-71, SP3-70, 41-502-2262, 56ZF28066-121

DSCP054 Series Spacers DSCP055 Series Spacers

DSC Part No. Thickness Other part numbers DSC Part No. Thickness Other part numbers

DSCP054-E125.......... .125 inch........ FSD 14237 DSCP055-E125.......... .125 inch........ FSD 14236

0.16 1.10 1.63 Ø0.34
0.90 (2) PLCS

0.14

0.42 0.39 0.84 0.36 0.72
1.95 1.12 1.63 0.94 Ø0.25
0.37
Ø0.39

Ø0.25 0.58 0.32 0.32
2.26
0.58

DSCP056 Series Spacers DSCP057 Series Spacers

DSC Part No. Thickness Other part numbers DSC Part No. Thickness Other part numbers

DSCP056-E125.......... .125 inch........ FSD 14235 DSCP057-E125.......... .125 inch........ FSD 14240

2.88 Ø0.53 1.10
(2) PLCS 0.16
0.34 1.60 0.37

0.50 1.11
1.22
2.13 1.00 1.12
3.06
0.58 0.39 0.84

Ø0.25 1.12 Ø0.25 Ø0.39
0.32 [8.1] 0.58 (2) PLCS

0.32

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 51 2015

Drawings are not to scale SPACERS Slots and holes are centered unless otherwise noted

Metric spacers are black oxided

DSCP058 Series Spacers DSCP059 Series Spacers

DSC Part No. Thickness Other part numbers Ø0.88 [22.3] DSC Part No. Thickness Other part numbers

DSCP058-E062.......... .062 inch........ FSD 14131-51 DSCP059-E062.......... .062 inch........ FSD 14136-51 Ø0.88 [22.3]
DSCP058-E125.......... .125 inch........ FSD 14131-52 DSCP059-E125.......... .125 inch........ FSD 14136-52 0.63 [16.0]

0.63 [16.0]

1.25 [31.8]

1.25 [31.8]

0.62 [15.7] 0.94 [23.9]
Ø0.88 [22.3]
1.86 [47.2] 1.88 [47.8]

DSCP060 Series Spacers DSCP061 Series Spacers

DSC Part No. Thickness Other part numbers Ø0.88 [22.3] DSC Part No. Thickness Other part numbers

DSCP060-E062.......... .062 inch........ FSD 14137-51 DSCP061-E062.......... .062 inch........ FSD 14138-51
DSCP060-E125.......... .125 inch........ FSD 14137-52 DSCP061-E125.......... .125 inch........ FSD 14138-52

0.63 [16.0] 0.63 [16.0]
1.25 [31.8]
1.25 [31.8]

1.12 [28.4] 0.62 [15.7]
2.25 [57.2] 2.62 [66.5]

DSCP062 Series Spacers DSCP063 Series Spacers

DSC Part No. Thickness Other part numbers Ø0.88 [22.3] DSC Part No. Thickness Other part numbers Ø0.88 [22.3]
0.63 [16.0]
DSCP062-E062.......... .062 inch........ FSD 14139-51 DSCP063-E062.......... .062 inch........ FSD 14140-51
DSCP062-E125.......... .125 inch........ FSD 14139-52 DSCP063-E125.......... .125 inch........ FSD 14140-52

1.25 [31.8] 0.63 [16.0]
1.25 [31.8]

1.37 [34.8] 0.62 [15.7]
2.75 [69.9] 2.87 [72.9]

DSCP064 Series Spacers Ø0.88 [22.3] DSCP065 Series Spacers Ø0.88 [22.3]
0.63 [16.0]
DSC Part No. Thickness Other part numbers DSC Part No. Thickness Other part numbers

DSCP064-E062.......... .062 inch........ FSD 14141-51 DSCP065-E062.......... .062 inch........ FSD 14142-51
DSCP064-E125.......... .125 inch........ FSD 14141-52 DSCP065-E125.......... .125 inch........ FSD 14142-52

1.25 [31.8] 0.63 [16.0]
1.25 [31.8]

1.63 [41.4] 1.88 [47.8]
3.25 [82.6] 3.75 [95.3]

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 52 2015

Drawings are not to scale SPACERS Slots and holes are centered unless otherwise noted

Metric spacers are black oxided

DSCP066 Series Spacers DSCP067 Series Spacers Ø0.88 [22.4]
TYP
DSC Part No. Thickness Other part numbers Ø0.88 [22.4] DSC Part No. Thickness Other part numbers

DSCP066-E062.......... .062 inch........ FSD 14143-51 DSCP067-E062.......... .062 inch........ FSD 14144-51
DSCP066-E125.......... .125 inch........ FSD 14143-52 DSCP067-E125.......... .125 inch........ FSD 14144-52

1.25 [31.8] 1.25 [31.8]
0.63 [15.9]
0.63 [15.9]
1.75 [44.5] 0.63 [15.9] 2.24 [56.9] Ø0.88 [22.4]
3.50 [88.9] 3.48 [88.4]

DSCP068 Series Spacers DSCP069 Series Spacers

DSC Part No. Thickness Other part numbers Ø0.88 [22.4] DSC Part No. Thickness Other part numbers
TYP
DSCP068-E062.......... .062 inch........ FSD 14145-51 DSCP069-E062.......... .062 inch........ FSD 14146-51
DSCP068-E125.......... .125 inch........ FSD 14145-52 DSCP069-E125.......... .125 inch........ FSD 14146-52

1.87 [47.5] 2.25 [57.2]

0.63 [15.9]

0.63 [15.9]

2.50 [63.5] 0.63 [15.9] 2.50 [63.5] 0.63 [15.9]
Ø0.88 [22.4]
DSCP070 Series Spacers DSCP071 Series Spacers Ø0.88 [22.4]
TYP
DSC Part No. Thickness Other part numbers DSC Part No. Thickness Other part numbers

DSCP070-E062.......... .062 inch........ FSD 14147-51 DSCP071-E062.......... .062 inch........ FSD 14148-51
DSCP070-E125.......... .125 inch........ FSD 14147-52 DSCP071-E125.......... .125 inch........ FSD 14148-52

2.62 [66.5] 1.25 [31.8] 0.62 [15.7]
0.76 [19.3] 0.68 [17.3]
0.62 [15.7] 2.61 [66.3]
Ø0.88 [22.4] 3.98 [101.1]

3.00 [76.2]

DSCP072 Series Spacers DSCP073 Series Spacers

DSC Part No. Thickness Other part numbers DSC Part No. Thickness Other part numbers Ø0.88 [22.4]
TYP
DSCP072-E062.......... .062 inch........ FSD 14174-51 DSCP073-E062.......... .062 inch........ FSD 14175-51
DSCP072-E125.......... .125 inch........ FSD 14174-52 DSCP073-E125.......... .125 inch........ FSD 14175-52

1.25 [31.8] 1.25 [31.8]
0.63 [15.9]
0.63 [15.9]
2.25 [57.2] 0.75 [19.1]
4.50 [114.3] 3.00 [76.2] 2015
4.50 [114.3]

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 53

Drawings are not to scale SPACERS Slots and holes are centered unless otherwise noted

Metric spacers are black oxided

DSCP074 Series Spacers Ø0.88 [22.4] DSCP075 Series Spacers Ø0.88
TYP
DSC Part No. Thickness Other part numbers DSC Part No. Thickness Other part numbers

DSCP074-E062.......... .062 inch........ FSD 14219-51 DSCP075-E062.......... .062 inch........ FSD 14230-51
DSCP074-E125.......... .125 inch........ FSD 14219-52 DSCP075-E125.......... .125 inch........ FSD 14230-52

1.24 [31.5]

0.63 [15.9] 1.50
0.75
0.56 [14.2] 0.75
3.38 [85.9] 1.50

4.50 [114.3]

DSCP076 Series Spacers Ø1.06 DSCP077 Series Spacers

DSC Part No. Thickness Other part numbers DSC Part No. Thickness Other part numbers Ø0.34
TYP
DSCP076-E180.......... .18 inch.......... FSD 40878 0.12 DSCP077-E180.......... .18 inch.......... FSD 40917
0.78
0.78 Ø1.06 TYP
TYP
Ø0.34
TYP

2.25 2.25

DSCP078 Series Spacers DSCP079 Series Spacers Ø0.34
TYP
DSC Part No. Thickness Other part numbers 0.12 DSC Part No. Thickness Other part numbers
1.00
DSCP078-E250.......... .25 inch.......... FSD 40879 Ø1.44 DSCP079-E250.......... .25 inch.......... FSD 40918 TYP

Ø1.44

Ø0.34 1.00
TYP TYP

2.62 2.62

DSCP080 Series Spacers 0.12 DSCP081 Series Spacers Ø1.94
1.08
DSC Part No. Thickness Other part numbers 1.08
TYP TYP
DSCP080-E320.......... .32 inch.......... FSD 40880 DSC Part No. Thickness Other part numbers

DSCP081-E320.......... .32 inch.......... FSD 40919

Ø1.94

1.25 1.25

0.62

R0.19 0.63
TYP
Ø0.38
3.25 TYP 3.25

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 54 2015

SPACERS

Drawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted

Most spacers are etched on the side with thickness

DSCP082 Series Spacers Ø2.44 DSCP083 Series Spacers Ø0.52
0.12 TYP
DSC Part No. Thickness Other part numbers DSC Part No. Thickness Other part numbers
1.41 TYP 1.41 TYP
DSCP082-E320.......... .32 inch.......... FSD 40881 DSCP083-E320.......... .32 inch.......... FSD 40920
1.63
R0.26 Ø2.44
TYP 0.81
1.63

0.81

4.00 4.00

DSCP084 Series Spacers Ø0.44 [11.2]
TYP
DSC Part No. Thickness Other part #s DSC Part No. Thickness Other part #s
2.25 [57.2]
DSCP084-M200.......... 2.00mm..........D113022, D113085 DSCP084-M562.......... 5.62mm..........D113043
0.50 [12.7]
DSCP084-M220.......... 2.20mm..........D113086 DSCP084-M575.......... 5.75mm..........D113044 1.25 [31.8]

DSCP084-M225.......... 2.25mm..........D113023 DSCP084-M580.......... 5.80mm..........D113104 TYP
3.50 [88.9]
DSCP084-M240.......... 2.40mm..........D113087 DSCP084-M588.......... 5.88mm..........D113045

DSCP084-M250.......... 2.50mm..........D113024 DSCP084-M600.......... 6.00mm..........D113046, D113105

DSCP084-M260.......... 2.60mm..........D113088 DSCP084-M612.......... 6.12mm..........D113047

DSCP084-M275.......... 2.75mm..........D113025 DSCP084-M620.......... 6.20mm..........D113106

DSCP084-M280.......... 2.80mm..........D113089 DSCP084-M625.......... 6.25mm..........D113048

DSCP084-M300.......... 3.00mm.......... D113026, D113090 DSCP084-M638.......... 6.38mm..........D113049

DSCP084-M320.......... 3.20mm.......... D113091 DSCP084-M640.......... 6.40mm..........D113107

DSCP084-M325.......... 3.25mm.......... D113027 DSCP084-M650.......... 6.50mm..........D113050

DSCP084-M340.......... 3.40mm.......... D113092 DSCP084-M660.......... 6.60mm..........D113108

DSCP084-M350.......... 3.50mm.......... D113028 DSCP084-M662.......... 6.62mm..........D113051

DSCP084-M360.......... 3.60mm.......... D113093 DSCP084-M675.......... 6.75mm..........D113052

DSCP084-M375.......... 3.75mm.......... D113029 DSCP084-M680.......... 6.80mm..........D113109

DSCP084-M380.......... 3.80mm.......... D113094 DSCP084-M688.......... 6.88mm..........D113053

DSCP084-M400.......... 4.00mm..........D113030, D113095 DSCP084-M700.......... 7.00mm.......... D113054, D113110

DSCP084-M412.......... 4.12mm..........D113031 DSCP084-M712.......... 7.12mm.......... D113055

DSCP084-M420.......... 4.20mm..........D113096 DSCP084-M720.......... 7.20mm.......... D113111

DSCP084-M425.......... 4.25mm..........D113032 DSCP084-M725.......... 7.25mm.......... D113056 3.25 [82.6]
DSCP084-M438.......... 4.38mm..........D113033 DSCP084-M738.......... 7.38mm.......... D113057

DSCP084-M440.......... 4.40mm..........D113097 DSCP084-M740.......... 7.40mm.......... D113112

DSCP084-M450.......... 4.50mm..........D113034 DSCP084-M750.......... 7.50mm.......... D113058

DSCP084-M460.......... 4.60mm..........D113098 DSCP084-M760.......... 7.60mm.......... D113113

DSCP084-M462.......... 4.62mm..........D113035 DSCP084-M775.......... 7.75mm.......... D113060

DSCP084-M475.......... 4.75mm..........D113036 DSCP084-M780.......... 7.80mm.......... D113114

DSCP084-M480.......... 4.80mm..........D113099 DSCP084-M788.......... 7.88mm.......... D113061

DSCP084-M488.......... 4.88mm..........D113037 DSCP084-M800.......... 8.00mm..........D113062, D113115

DSCP084-M500.......... 5.00mm.......... D113038, D113100

DSCP084-M512.......... 5.12mm.......... D113039

DSCP084-M520.......... 5.20mm.......... D113101 0.50 [12.7]
DSCP084-M525.......... 5.25mm.......... D113040

DSCP084-M538.......... 5.38mm.......... D113041

DSCP084-M540.......... 5.40mm.......... D113102

DSCP084-M550.......... 5.50mm.......... D113042

DSCP084-M560.......... 5.60mm.......... D113103

DSCP085 Series Spacers 3.54 [90.0]

DSC Part No. Thickness Other part #s DSC Part No. Thickness Other part #s 2.36 [60.0]

DSCP085-M300.......... 3.00mm.......... D233007 DSCP085-M640.......... 6.40mm..........D233024 0.45 [11.3]
DSCP085-M320.......... 3.20mm.......... D233008 DSCP085-M660.......... 6.60mm..........D233025 1.18 [30.0]
DSCP085-M340.......... 3.40mm.......... D233009 DSCP085-M680.......... 6.80mm..........D233026
DSCP085-M360.......... 3.60mm.......... D233010 DSCP085-M700.......... 7.00mm.......... D233027 TYP
DSCP085-M380.......... 3.80mm.......... D233011
DSCP085-M400.......... 4.00mm..........D233012 Ø0.41 [10.5] 3.25 [82.6]
DSCP085-M420.......... 4.20mm..........D233013 TYP 0.59 [15.0]
DSCP085-M440.......... 4.40mm..........D233014
DSCP085-M460.......... 4.60mm..........D233015
DSCP085-M480.......... 4.80mm..........D233016
DSCP085-M500.......... 5.00mm.......... D233017
DSCP085-M520.......... 5.20mm.......... D233018
DSCP085-M540.......... 5.40mm.......... D233019
DSCP085-M560.......... 5.60mm.......... D233020
DSCP085-M580.......... 5.80mm.......... D233021
DSCP085-M600.......... 6.00mm.......... D233022
DSCP085-M620.......... 6.20mm.......... D233023

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 55 2015

Drawings are not to scale SPACERS Slots and holes are centered unless otherwise noted

Metric spacers are black oxided

Ø0.41 [10.4] 2.00 [50.8]
TYP

DSCP086 Series Spacers

DSC Part No. Thickness Other part numbers

DSCP086-M300.......... 3.00mm..........D101044 1.00 [25.4]
DSCP086-M400.......... 4.00mm..........D101045
DSCP086-M500.......... 5.00mm..........D101046
DSCP086-M600.......... 6.00mm..........D101047
DSCP086-M700.......... 7.00mm.......... D101048
DSCP086-M800.......... 8.00mm..........D101049

0.50 [12.7]

0.50 [12.7] 1.00 [25.4]

4.33 [110.0]

DSCP087 Series Spacers 0.79 [20.0]
2.76 [70.0]
DSC Part No. Thickness Other part #s DSC Part No. Thickness Other part #s

DSCP087-M300.......... 3.00mm.......... ACS630S DSCP087-M640.......... 6.40mm.......... ACS664S Ø0.41
DSCP087-M320.......... 3.20mm.......... ACS632S DSCP087-M660.......... 6.60mm.......... ACS666S [10.5]
DSCP087-M340.......... 3.40mm.......... ACS634S DSCP087-M680.......... 6.80mm.......... ACS668S TYP
DSCP087-M360.......... 3.60mm.......... ACS636S DSCP087-M700.......... 7.00mm.......... ACS670S
DSCP087-M380.......... 3.80mm.......... ACS638S
DSCP087-M400.......... 4.00mm.......... ACS640S 4.33 [110.0]
DSCP087-M420.......... 4.20mm.......... ACS642S
DSCP087-M440.......... 4.40mm.......... ACS644S 0.79 [20.0] 1.38 [35.0] TYP
DSCP087-M460.......... 4.60mm.......... ACS646S
DSCP087-M480.......... 4.80mm.......... ACS648S
DSCP087-M500.......... 5.00mm.......... ACS650S
DSCP087-M520.......... 5.20mm.......... ACS652S
DSCP087-M540.......... 5.40mm.......... ACS654S
DSCP087-M560.......... 5.60mm.......... ACS656S
DSCP087-M580.......... 5.80mm.......... ACS658S
DSCP087-M600.......... 6.00mm.......... ACS660S
DSCP087-M620.......... 6.20mm.......... ACS662S

DSCP088 Series Spacers Ø0.56 [14.2]
TYP
DSC Part No. Thickness Other part numbers

DSCP088-E250.......... .25 inch.......... D113069

1.50 [38.1]

0.75 [19.1]

0.75 [19.1] 2.50 [63.5]
4.00 [101.6]
Ø0.56 [14.2]
DSCP089 Series Spacers TYP

DSC Part No. Thickness Other part numbers

DSCP089-E250.......... .25 inch.......... D113070

1.50 [38.1]

0.75 [19.1] 3.00 [76.2] 0.75 [19.1]
4.50 [114.3]
2015
Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 56

SPACERS and RETAINERS

Drawings are not to scale Metric spacers are black oxided Slots and holes are centered unless otherwise noted

Ø0.56 [14.2]
TYP

DSCP090 Series Spacers

DSC Part No. Thickness Other part numbers

DSCP090-E250.......... .25 inch.......... D113071

1.50 [38.1]

0.75 [19.1]

0.75 [19.1] 3.50 [88.9]
5.00 [127.0]

DSCP091 Series Spacers

DSC Part No. Thickness Other part numbers Ø0.56 [14.2]
TYP
DSCP091-E250.......... .25 inch.......... D113072

1.50 [38.1] 0.75 [19.1]
0.75 [19.1]
7.50 [190.5]
9.00 [228.6]

DSCP092 Series Spacers 1.18 [30] Ø.41 [10.5]
2.36 [60] 1.97 [50]
DSC Part No. Thickness Other part #s DSC Part No. Thickness Other part #s Ø1.65 [42]
2.24 [57]
DSCP092-M025.......... 0.25mm.......... DSCP092-M560.......... 5.60mm.......... ASP256N 1.18 [30]
DSCP092-M050.......... 0.50mm.......... DSCP092-M580.......... 5.80mm.......... ASP258N .39 [10] 2015
DSCP092-M100..........1.00mm.......... DSCP092-M600.......... 6.00mm.......... ASP260N
DSCP092-M200.......... 2.00mm.......... DSCP092-M620.......... 6.20mm.......... ASP262N
DSCP092-M300.......... 3.00mm.......... ASP230N DSCP092-M640.......... 6.40mm.......... ASP264N
DSCP092-M320.......... 3.20mm.......... ASP232N DSCP092-M660.......... 6.60mm.......... ASP266N
DSCP092-M340.......... 3.40mm.......... ASP234N DSCP092-M680.......... 6.80mm.......... ASP268N
DSCP092-M360.......... 3.60mm.......... ASP236N DSCP092-M700.......... 7.00mm.......... ASP270N
DSCP092-M380.......... 3.80mm.......... ASP238N
DSCP092-M400.......... 4.00mm.......... ASP240N
DSCP092-M420.......... 4.20mm.......... ASP242N
DSCP092-M440.......... 4.40mm.......... ASP244N
DSCP092-M460.......... 4.60mm.......... ASP246N
DSCP092-M480.......... 4.80mm.......... ASP248N
DSCP092-M500.......... 5.00mm.......... ASP250N
DSCP092-M520.......... 5.20mm.......... ASP252N
DSCP092-M540.......... 5.40mm.......... ASP254N

DSCP093 Series Spacers 1.18 [30] 2.36 [60]
1.58 [40]
DSC Part No. Thickness Other part #s DSC Part No. Thickness Other part #s 2.99 [76]
Ø.35 [9]
DSCP093-M025.......... 0.25mm.......... DSCP093-M560.......... 5.60mm.......... ASP756N
DSCP093-M050.......... 0.50mm.......... DSCP093-M580.......... 5.80mm.......... ASP758N
DSCP093-M100..........1.00mm.......... DSCP093-M600.......... 6.00mm.......... ASP760N
DSCP093-M200.......... 2.00mm.......... DSCP093-M620.......... 6.20mm.......... ASP762N
DSCP093-M300.......... 3.00mm.......... ASP730N DSCP093-M640.......... 6.40mm.......... ASP764N
DSCP093-M320.......... 3.20mm.......... ASP732N DSCP093-M660.......... 6.60mm.......... ASP766N
DSCP093-M340.......... 3.40mm.......... ASP734N DSCP093-M680.......... 6.80mm.......... ASP768N
DSCP093-M360.......... 3.60mm.......... ASP736N DSCP093-M700.......... 7.00mm.......... ASP770N
DSCP093-M380.......... 3.80mm.......... ASP738N
DSCP093-M400.......... 4.00mm.......... ASP740N .79 [20]
DSCP093-M420.......... 4.20mm.......... ASP742N
DSCP093-M440.......... 4.40mm.......... ASP744N
DSCP093-M460.......... 4.60mm.......... ASP746N
DSCP093-M480.......... 4.80mm.......... ASP748N
DSCP093-M500.......... 5.00mm.......... ASP750N
DSCP093-M520.......... 5.20mm.......... ASP752N
DSCP093-M540.......... 5.40mm.......... ASP754N

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 57

Drawings are not to scale RETAINERS Slots and holes are centered unless otherwise noted

Metric spacers are black oxided

DSCR001 Series Retainers DSCR002 Series Retainers Ø0.53 [13.5]
TYP
DSC Part No. Thickness Other part numbers Ø0.50 [12.7] DSC Part No. Thickness Other part numbers
0.75 [19.1]
DSCR001-E180.......... .18 inch.......... M 1077 DSCR002-E180.......... .18 inch.......... M 1080

2.00 [50.8] 4.00 [101.6]

Ø0.28 [7.1] 0.38 [9.5]
(2) PLCS 0.38 [9.5]
0.25 [6.4]
1.25 [31.8] 1.50 [38.1]

0.25 [6.4] 1.00 [25.4] 2.00 [50.8]
3.50 [88.9]
0.75 [19.1] 0.75 [19.1]
2.26 [57.4]
DSCR003 Series Retainers

DSC Part No. Thickness Other part numbers

DSCR003-E180.......... .18 inch.......... M 1309

Ø0.56 [14.2] 0.63 [15.9] 1.25 [31.8]
TYP 0.63 [15.9]

R1.00 [25.4] .75 [10.1]

Genuine DSC is Made in USA

The "DSC" prefixing our part numbers stands for Douglas Stamping Company. Genuine
DSC components purchased from us are manufactured in the U.S.A., in the Detroit
Metropolitan region.

We are aware of other companies selling sub-standard and imported shim, spacer and
washer substitutes using our part numbers. You may be assured that DSC components
purchased from us and from our qualified re-sellers are genuine.

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 58 2015

Drawings are not to scale RETAINERS and KEEPERS

Slots and holes are centered unless otherwise noted

DSCR004 Series Serrated Retainer Plates (dimensions in inches)

DSC Part No. A dim B dim C dim D dim E dim F dim Thickness Other part numbers

DSCR004-E250.......... 2.00 ......... 1.50 ......... 1.00 ......... 0.50 ........ 0.75 ........ 0.531 .......... 0.250 ............ FSD 3399
DSCR005-E312.......... 3.25 ......... 2.00 ......... 2.00 ......... 0.62 ........ 1.00 ........ 0.687 .......... 0.312 ............ FSD 3850
DSCR006-E312.......... 2.25 ......... 1.38 ......... 1.12 ......... 0.56 ........ 0.69 ........ 0.687 .......... 0.312 ............ FSD 3851
DSCR007-E312.......... 3.50 ......... 2.00 ......... 2.00 ......... 0.75 ........ 1.00 ........ 0.812 .......... 0.312 ............ FSD 3999
DSCR008-E250.......... 2.50 ......... 1.50 ......... 1.50 ......... 0.50 ........ 0.75 ........ 0.625 .......... 0.250 ............ 56ZM 2359-1
DSCR009-E250.......... 2.25 ......... 1.38 ......... 1.13 ......... 0.56 ........ 0.69 ........ 0.562 .......... 0.250 ............ 56ZM 2359-6

A

B Heat treated to Rockwell C 32-35
E
90°

ØF 0.03
TYP
CD

DSCK001 Series Keeper DSCK002 Series Keeper

DSC Part No. Thickness Other part numbers Ø0.34 DSC Part No. Thickness Other part numbers

DSCK001-E125.......... .125 inch........ FSD 34572-51 DSCK002-E125.......... .125 inch........ FSD 34572-52

1.25

1.00 Ø0.34 1.00
0.50 TYP 0.50

0.50 1.00 0.31 0.63
1.001.25
DSCK003 Series Keeper with 156-18 SHCS DSCK004 Series Keeper

DSC Part No. Thickness Other part numbers DSC Part No. Thickness Other part numbers

DSCK003-E125.......... .125 inch........ 56ZM 2479-1 DSCK004-E125.......... .125 inch....... WG 1969-51

0.31 1.00

Ø0.34

1.00 Ø0.28
0.31 TYP

0.63 1.63
1.25

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 59 2015

KEEPERS, TEST COUPONS, FEELER GAGES

Drawings are not to scale Slots and holes are centered unless otherwise noted

0.28
TYP

DSCK005 Series Keepers (painted)

DSC Part No. Thickness Other part numbers

DSCK005-E125.......... .125 inch........ WG 1969-51 REV '2'

1.38 1.25
0.75

0.31 1.00
1.63

DSCB00X Series Insulating Bushings

DSC Part No. ID mm OD mm Other part numbers

DSCB001-M0XX........ 6.0........ 9.0........ FSD 41404-51-XX
DSCB002-M0XX........ 8.0........ 11.0...... FSD 41404-52-XX
DSCB003-M0XX........ 10.0...... 13.0...... FSD 41404-53-XX
DSCB004-M0XX........ 12.0...... 15.0...... FSD 41404-54-XX
DSCB005-M0XX........ 14.0...... 17.0...... FSD 41404-55-XX

These bushings are made from phenolic tubing, where the XX designates the length in
millimeters. We are also happy to sell the uncut phenolic tubing.

DSCF001 Series Feeler Gages Ø0.22
2.74
DSC Part No. Thickness Other part numbers

DSCF001-M010.......... 0.10mm..........FSD30337-010 0.50 0.24
DSCF001-M020.......... 0.20mm..........FSD30337-020
DSCF001-M025.......... 0.25mm..........FSD30337-025
DSCF001-M050.......... 0.50mm..........FSD30337-050
DSCF001-M100.......... 1.00mm.......... FSD30337-100
DSCF001-M120.......... 1.20mm.......... FSD30337-120
DSCF001-M150.......... 1.50mm.......... FSD30337-150
DSCF001-M200.......... 2.00mm..........FSD30337-200
DSCF001-M300.......... 3.00mm..........FSD30337-300
DSCF001-M400.......... 4.00mm..........FSD30337-400

Feeler Gages can be made to your specifications, as individual blades or assembled onto a
ring or into a case as below. Steel blades are etched with thickness. Stock thickness are
indicated above. Several thicknesses are also available in plastic. Please call to discuss your
specific needs.

DSCF002 Series Feeler Gage Set

DSC Part No. Total thickness Components

DSCF002-M909.......... 9.00mm.......... (1) 0.10mm, (2) 0.20mm, (3) 0.50mm,
(1) 1.00mm, (2) 3.00mm

Legacy Part Number.......... FSD 30337 m .m50

Custom feeler gage stackups and m.5m0 .20 3.0 1.0mm
assemblies are available. mm .20 .10 .50 mm
mm mm mm

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 60 2015

WELD WASHERS, SERRATED WASHERS, LINKS

Drawings are not to scale Slots and holes are centered unless otherwise noted

DSCD Series Weld Washers

DSC Part No. I.D. O.D. Flat to Center Thickness Material/Plating Other part numbers

DSCD001-E125.......... 0.25 inch....... 0.75 inch........ 0.25 inch............ 0.13 inch........... steel...................... DSC-D-14 I.D. O.D.
DSCD002-E125.......... 0.31 inch....... 0.88 inch........ 0.31 inch............ 0.13 inch........... steel...................... DSC-D-516
DSCD003-E250.......... 0.38 inch....... 1.00 inch........ 0.38 inch............ 0.25 inch........... steel...................... 56ZF24981-38 Flat
DSCD004-E140.......... 0.38 inch....... 1.00 inch........ 0.38 inch............ 0.14 inch........... steel...................... 56ZM 2359-2, DSC-D-38 to
DSCD005-E140.......... 0.38 inch....... 1.00 inch........ 0.38 inch............ 0.14 inch........... steel...................... FSD 14102 Center
DSCD006-E140.......... 0.38 inch....... 1.00 inch........ 0.38 inch............ 0.14 inch........... stainless................ FSD 14102SS
DSCD007-E190.......... 0.50 inch....... 1.25 inch........ 0.38 inch............ 0.19 inch........... steel...................... 56ZM 2359-3, DSC-D-12
DSCD008-E190.......... 0.50 inch....... 1.25 inch........ 0.38 inch............ 0.19 inch........... steel...................... FSD 14103
DSCD009-E190.......... 0.50 inch....... 1.25 inch........ 0.50 inch............ 0.19 inch........... stainless................ FSD 14103SS
DSCD010-E190.......... 0.50 inch....... 1.25 inch........ 0.50 inch............ 0.19 inch........... steel/zinc............... FSD 14103Z
DSCD011-E250.......... 0.50 inch....... 1.25 inch........ 0.50 inch............ 0.25 inch........... steel...................... 56ZF24981-12
DSCD018-E310.......... 0.50 inch....... 1.38 inch........ 0.50 inch............ 0.31 inch........... steel...................... P111005
DSCD012-E190.......... 0.63 inch....... 1.38 inch........ 0.50 inch............ 0.19 inch........... steel...................... DSC-D-58
DSCD013-E250.......... 0.63 inch....... 1.50 inch........ 0.50 inch............ 0.25 inch........... steel...................... 56ZF24981-58
DSCD014-E250.......... 0.75 inch....... 1.50 inch........ 0.56 inch............ 0.25 inch........... steel...................... 56ZF24981-34
DSCD015-E250.......... 0.75 inch....... 1.50 inch........ 0.63 inch............ 0.25 inch........... steel...................... FSD 14239, DSC-D-34
DSCD016-E250.......... 0.88 inch....... 1.75 inch........ 0.63 inch............ 0.25 inch........... steel...................... DSC-D-78
DSCD017-E310.......... 1.00 inch....... 2.00 inch........ 0.69 inch............ 0.31 inch........... steel...................... DSC-D-100
DSCD101-M300..........6.4mm........... 19.0mm.......... 6.4mm................ 3.0mm............... steel...................... FSD 41341, DSC-D-M6
DSCD102-M300..........6.4mm........... 19.0mm.......... 6.4mm................ 3.0mm............... phenolic................. DSC-D-M6P
DSCD103-M300..........8.1mm........... 22.4mm.......... 8.0mm................ 3.0mm............... steel...................... FSD 41342, DSC-D-M8
DSCD104-M300..........8.1mm........... 22.4mm.......... 8.0mm................ 3.0mm............... phenolic................. DSC-D-M8P
DSCD105-M300..........10.1mm......... 25.4mm.......... 10.0mm.............. 3.0mm............... steel...................... FSD 41343, DSC-D-M10
DSCD106-M300..........10.1mm......... 25.4mm.......... 10.0mm.............. 3.0mm............... phenolic................. DSC-D-M10P
DSCD107-M400..........12.1mm......... 31.8mm.......... 12.0mm.............. 4.0mm............... steel...................... FSD 41344, DSC-D-M12
DSCD108-M400..........12.1mm......... 31.8mm.......... 12.0mm.............. 4.0mm............... phenolic................. DSC-D-M12P
DSCD109-M480..........16.7mm......... 38.1mm.......... 15.0mm.............. 4.8mm............... steel...................... DSC-D-M16
DSCD110-M635..........20.3mm......... 44.5mm.......... 19.0mm.............. 6.4mm............... steel...................... DSC-D-M20

DSCS Series Serrated Washers (dimensions in inches)

DSC Part No. I.D. O.D. Thickness Material Other part numbers

DSCS001-E160.......... 0.27 ............. 0.62 .............. 0.16 .................. steel......... FSD 14040-3
DSCS002-E160.......... 0.33 ............. 0.75 .............. 0.16 .................. steel......... FSD 14040-4
DSCS003-E160.......... 0.39 ............. 0.88 .............. 0.16 .................. steel......... FSD 14040-5
DSCS004-E160.......... 0.52 ............. 1.00 .............. 0.16 .................. steel......... FSD 14040-1
DSCS005-E160.......... 0.64 ............. 1.25 .............. 0.16 .................. steel......... FSD 14040-2

.16

O.D. 90°

I.D. These serrated washers are heat treated .025
.501 ± .001
Rockwell C 40-44 and black oxided.

DSCY Series Links (dimensions in inches)

DSC Part No. A B length Thickness Material Other part numbers

DSCY001-E250.......... 2.50 ............. 3.38 .............. 0.25 .................. steel......... WG-8357-51
DSCY002-E250.......... 3.00 ............. 3.88 .............. 0.25 .................. steel......... WG-8357-52
DSCY003-E250.......... 1.88 ............. 2.75 .............. 0.25 .................. steel......... WG-8357-53
DSCY004-E250.......... 2.75 ............. 3.62 .............. 0.25 .................. steel......... WG-8357-54
DSCY005-E250.......... 2.38 ............. 3.25 .............. 0.25 .................. steel......... WG-8357-55
DSCY006-E250.......... 3.88 ............. 4.75 .............. 0.25 .................. steel......... WG-8357-56
DSCY007-E250.......... 3.25 ............. 4.12 .............. 0.25 .................. steel......... WG-8357-57
DSCY008-E250.......... 2.12 ............. 3.00 .............. 0.25 .................. steel......... WG-8357-58

.88

A

B

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 61 2015

WASHERS

Drawings are not to scale Slots and holes are centered unless otherwise noted

DSCW Series Inch Steel Washers

DSC Part No. I.D. O.D. Thickness Notes/Other part numbers

DSCW001-E060......... 0.21 ............. 0.50 .............. 0.06 ...................FSD 36577 I.D. O.D.
DSCW002-E100......... 0.21 ............. 0.62 .............. 0.10 ...................FSD 14312
DSCW003-E130......... 0.38 ............. 1.00 .............. 0.13 ...................56ZM 2359-9 DSC Part No. I.D. O.D. Thickness Notes/Other part numbers
DSCW004-E130......... 0.38 ............. 1.00 .............. 0.13 ...................STD 40-4
DSCW005-E190......... 0.39 ............. 0.75 .............. 0.19 ...................WG1104-51 DSCW090-E002......... 1.25 ............. 1.50 .............. 0.002 .................WG 2416-57-A
DSCW006-E100......... 0.41 ............. 0.75 .............. 0.10 ...................FSD 14184 DSCW091-E060......... 1.25 ............. 1.75 .............. 0.06 ...................WT134-57
DSCW007-E100......... 0.41 ............. 0.81 .............. 0.10 ...................FSD 14150 DSCW092-E120......... 1.25 ............. 1.75 .............. 0.12 ...................WG786-51
DSCW008-E130......... 0.42 ............. 1.24 .............. 0.13 ...................FSD 14120 DSCW093-E120......... 1.25 ............. 1.75 .............. 0.12 ...................WG921-51
DSCW009-E130......... 0.44 ............. 1.75 .............. 0.13 ...................FSD 14101-1 DSCW094-E120......... 1.28 ............. 2.00 .............. 0.12 ...................WG1370-51
DSCW010-E190......... 0.47 ............. 1.92 .............. 0.19 ...................1493919 DSCW095-E190......... 1.28 ............. 2.25 .............. 0.19 ...................STD 40-6
DSCW011-E002......... 0.50 ............. 0.88 .............. 0.002 .................WG 521-76-A DSCW096-E120......... 1.31 ............. 2.00 .............. 0.12 ...................WG840-51
DSCW012-E005......... 0.50 ............. 0.88 .............. 0.005 .................WG 521-76-C DSCW097-E120......... 1.38 ............. 2.25 .............. 0.12 ...................WG780-51
DSCW013-E032......... 0.50 ............. 0.88 .............. 0.032 .................WG 521-76-F DSCW098-E040......... 1.40 ............. 1.75 .............. 0.04 ...................WG1064-51
DSCW014-E010......... 0.50 ............. 0.88 .............. 0.010 .................WG 521-76-D DSCW099-E003......... 1.50 ............. 1.82 .............. 0.003 .................WG 2416-61-B
DSCW015-E003......... 0.50 ............. 0.88 .............. 0.003 .................WG 521-76-B DSCW100-E032......... 1.50 ............. 1.82 .............. 0.032 .................WG 2416-61-F
DSCW016-E015......... 0.50 ............. 0.88 .............. 0.015 .................WG 521-76-E DSCW101-E005......... 1.50 ............. 1.82 .............. 0.005 .................WG 2416-61-C
DSCW017-E380......... 0.50 ............. 1.25 .............. 0.38 ...................56ZM 2359-7 DSCW102-E010......... 1.50 ............. 1.82 .............. 0.01 ...................WG 2416-61-D
DSCW019-E380......... 0.50 ............. 2.13 .............. 0.38 ...................FSD 14162 DSCW103-E002......... 1.50 ............. 1.82 .............. 0.002 .................WG 2416-61-A
DSCW020-E190......... 0.51 ............. 1.38 .............. 0.19 ...................STD-40-9 DSCW104-E015......... 1.50 ............. 1.82 .............. 0.015 .................WG 2416-61-E
DSCW021-E100......... 0.53 ............. 0.88 .............. 0.10 ...................FSD 14151 DSCW105-E032......... 1.50 ............. 1.94 .............. 0.032 .................WG 642-51-F
DSCW022-E130......... 0.53 ............. 1.00 .............. 0.13 ...................STD 40-2 DSCW106-E005......... 1.50 ............. 1.94 .............. 0.005 .................WG 642-51-C
DSCW023-E190......... 0.53 ............. 1.25 .............. 0.19 ...................FSD 14128 DSCW107-E015......... 1.50 ............. 1.94 .............. 0.015 .................WG 642-51-E
DSCW024-E380......... 0.53 ............. 1.50 .............. 0.38 ...................FSD 14083 DSCW108-E002......... 1.50 ............. 1.94 .............. 0.002 .................WG 642-51-A
DSCW025-E060......... 0.54 ............. 0.81 .............. 0.06 ...................FSD 14013 DSCW109-E003......... 1.50 ............. 1.94 .............. 0.003 .................WG 642-51-B
DSCW026-E160......... 0.54 ............. 1.18 .............. 0.16 ...................FSD 14010 DSCW110-E010......... 1.50 ............. 1.94 .............. 0.01 ...................WG 642-51-D
DSCW027-E160......... 0.54 ............. 1.18 .............. 0.16 ...................6022899 DSCW111-E120......... 1.54 ............. 2.25 .............. 0.12 ...................WG1511-51
DSCW028-E160......... 0.54 ............. 1.18 .............. 0.16 ...................41-12-839-01 DSCW112-E002......... 1.56 ............. 1.81 .............. 0.002 .................WG 522-54-A
DSCW029-E160......... 0.54 ............. 1.50 .............. 0.13 ...................FSD 14121 DSCW113-E032......... 1.56 ............. 1.81 .............. 0.032 .................WG 522-54-F
DSCW030-E160......... 0.54 ............. 2.00 .............. 0.13 ...................FSD 14121-52 DSCW114-E005......... 1.56 ............. 1.81 .............. 0.005 .................WG 522-54-C
DSCW031-E130......... 0.55 ............. 0.81 .............. 0.12 ...................FSD 14126 DSCW115-E015......... 1.56 ............. 1.81 .............. 0.015 .................WG 522-54-E
DSCW032-E130......... 0.55 ............. 1.06 .............. 0.50 ...................FSD 14125 DSCW116-E150......... 1.56 ............. 1.81 .............. 0.003 .................WG 522-54-B
DSCW033-E120......... 0.55 ............. 1.06 .............. 0.20 ...................FSD 14123 DSCW117-E010......... 1.56 ............. 1.81 .............. 0.01 ...................WG 522-54-D
DSCW034-E500......... 0.56 ............. 1.75 .............. 0.06 ...................FSD 14014 DSCW118-E120......... 1.62 ............. 2.25 .............. 0.12 ...................WG787-51
DSCW035-E200......... 0.56 ............. 1.25 .............. 0.13 ...................FSD 14101-2 DSCW119-E120......... 1.62 ............. 2.75 .............. 0.12 ...................WG922-51
DSCW036-E060......... 0.65 ............. 1.50 .............. 0.09 ...................FSD 14119 DSCW120-E060......... 1.66 ............. 2.38 .............. 0.06 ...................WG577-51
DSCW037-E250......... 0.65 ............. 1.50 .............. 0.25 ...................FSD 14091 DSCW121-E120......... 1.66 ............. 2.75 .............. 0.12 ...................WG929-51
DSCW038-E090......... 0.65 ............. 1.62 .............. 0.09 ...................FSD 32789 DSCW122-E002......... 1.75 ............. 1.94 .............. 0.002 .................WG 2507-54-A
DSCW039-E090......... 0.65 ............. 1.75 .............. 0.09 ...................FSD 32788 DSCW123-E010......... 1.75 ............. 1.94 .............. 0.01 ...................WG 2507-54-D
DSCW040-E090......... 0.65 ............. 2.50 .............. 0.09 ...................CL 145-60 DSCW124-E005......... 1.75 ............. 1.94 .............. 0.005 .................WG 2507-54-C
DSCW041-E090......... 0.65 ............. 1.97 .............. 0.09 ...................CL 146-54 DSCW125-E003......... 1.75 ............. 1.94 .............. 0.003 .................WG 2507-54-B
DSCW042-E130......... 0.66 ............. 1.25 .............. 0.13 ...................STD 40-1 DSCW126-E032......... 1.75 ............. 1.94 .............. 0.032 .................WG 2507-54-F
DSCW043-E120......... 0.66 ............. 2.00 .............. 0.12 ...................WG1442-53 DSCW127-E015......... 1.75 ............. 1.94 .............. 0.015 .................WG 2507-54-E
DSCW044-E120......... 0.66 ............. 2.25 .............. 0.12 ...................WG1211-53 DSCW128-E120......... 1.94 ............. 2.25 .............. 0.12 ...................WG790-51
DSCW045-E200......... 0.67 ............. 1.25 .............. 0.20 ...................FSD 14124 DSCW129-E120......... 1.94 ............. 2.50 .............. 0.12 ...................WG970-51
DSCW046-E120......... 0.76 ............. 1.50 .............. 0.12 ...................CL 127-60 DSCW130-E120......... 1.94 ............. 2.50 .............. 0.12 ...................WG980-51
DSCW047-E130......... 0.78 ............. 1.25 .............. 0.13 ...................STD 40-3 DSCW131-E120......... 1.94 ............. 2.75 .............. 0.12 ...................WG923-51
DSCW048-E190......... 0.78 ............. 1.50 .............. 0.19 ...................STD 40-7 DSCW132-E120......... 1.97 ............. 3.00 .............. 0.12 ...................WG1080-51
DSCW049-E150......... 0.81 ............. 1.00 .............. 0.15 ...................WG 629-59-E DSCW133-E002......... 3.25 ............. 3.94 .............. 0.002 .................WG2416-59-A
DSCW050-E320......... 0.81 ............. 1.00 .............. 0.32 ...................WG 629-59-F DSCW134-E010......... 3.25 ............. 3.94 .............. 0.01 ...................WG2416-59-D
DSCW051-E010......... 0.81 ............. 1.00 .............. 0.01 ...................WG 629-59-D DSCW135-E003......... 3.25 ............. 3.94 .............. 0.003 .................WG2416-59-B
DSCW052-E002......... 0.81 ............. 1.00 .............. 0.002 .................WG 629-59-A DSCW136-E032......... 3.25 ............. 3.94 .............. 0.032 .................WG2416-59-F
DSCW053-E003......... 0.81 ............. 1.00 .............. 0.003 .................WG 629-59-B DSCW137-E005......... 3.25 ............. 3.94 .............. 0.005 .................WG2416-59-C
DSCW054-E005......... 0.81 ............. 1.50 .............. 0.005 .................WG 629-59-C DSCW138-E015......... 3.25 ............. 3.94 .............. 0.015 .................WG2416-59-E
DSCW055-E130......... 0.88 ............. 1.38 .............. 0.13 ...................FSD 14182
DSCW056-E210......... 0.90 ............. 1.50 .............. 0.21 ...................CL 124-51 DSCW Series Metric Steel Washers
DSCW057-E002......... 0.94 ............. 1.38 .............. 0.002 .................WG 2416-53-A
DSCW058-E015......... 0.94 ............. 1.38 .............. 0.015 .................WG 2416-53-E DSC Part No. I.D. O.D. Thickness Notes/Other part numbers
DSCW059-E003......... 0.94 ............. 1.38 .............. 0.003 .................WG 2416-53-B
DSCW060-E032......... 0.94 ............. 1.38 .............. 0.032 .................WG 2416-53-F DSCW301-E060......... 5.6 ............... 14.8 .............. 1.4 .....................F610515
DSCW061-E005......... 0.94 ............. 1.38 .............. 0.005 .................WG 2416-53-C DSCW302-E100......... 6.7 ............... 18.6 .............. 1.4 .....................F610618
DSCW062-E010......... 0.94 ............. 1.25 .............. 0.01 ...................WG 2416-53-D DSCW303-E130......... 9.0 ............... 24.9 .............. 1.9 .....................F610825
DSCW063-E010......... 1.00 ............. 1.25 .............. 0.01 ...................WG 521-75-D DSCW304-E130......... 11.0 ............. 27.7 .............. 2.4 .....................F611028
DSCW064-E015......... 1.00 ............. 1.25 .............. 0.015 .................WG 521-75-E DSCW305-E190......... 13.4 ............. 33.7 .............. 3.0 .....................F611234
DSCW065-E032......... 1.00 ............. 1.25 .............. 0.032 .................WG 521-75-F DSCW306-E100......... 17.3 ............. 43.7 .............. 3.5 .....................F611644
DSCW066-E005......... 1.00 ............. 1.25 .............. 0.005 .................WG 521-75-C DSCW307-E100......... 22.0 ............. 49.7 .............. 4.0 .....................F612050
DSCW067-E003......... 1.00 ............. 1.25 .............. 0.003 .................WG 521-75-B DSCW308-E130......... 25.8 ............. 55.4 .............. 4.5 .....................F612456
DSCW068-E002......... 1.00 ............. 1.25 .............. 0.002 .................WG 521-75-A DSCW309-E130......... 32.7 ............. 70.4 .............. 5.0 .....................F613072
DSCW069-E120......... 1.00 ............. 1.71 .............. 0.12 ...................FSD 14163 DSCW310-E190......... 38.6 ............. 89.3 .............. 5.7 .....................F613690
DSCW070-E060......... 1.01 ............. 1.75 .............. 0.06 ...................WG753-51
DSCW071-E150......... 1.02 ............. 1.38 .............. 0.15 ...................WT140X-56 We will make any washer, in any
DSCW072-E150......... 1.02 ............. 1.38 .............. 0.15 ...................FSD 14170
DSCW073-E190......... 1.03 ............. 1.88 .............. 0.19 ...................WG308-51 quantity and size, from any
DSCW074-E130......... 1.03 ............. 2.00 .............. 0.13 ...................CL 159-58
DSCW075-E190......... 1.03 ............. 2.00 .............. 0.19 ...................STD 40-5 material. Call us with your
DSCW076-E120......... 1.06 ............. 1.50 .............. 0.12 ...................WG802-51
DSCW077-E250......... 1.06 ............. 2.50 .............. 0.25 ...................STD 40-8 requirements!
DSCW078-E040......... 1.21 ............. 1.75 .............. 0.04 ...................WG1064-52
DSCW079-E005......... 1.24 ............. 1.62 .............. 0.005 .................WG 2416-65-C
DSCW080-E010......... 1.24 ............. 1.62 .............. 0.01 ...................WG 2416-65-D
DSCW081-E003......... 1.24 ............. 1.62 .............. 0.003 .................WG 2416-65-B
DSCW082-E002......... 1.24 ............. 1.62 .............. 0.002 .................WG 2416-65-A
DSCW083-E015......... 1.24 ............. 1.62 .............. 0.015 .................WG 2416-65-E
DSCW084-E032......... 1.24 ............. 1.62 .............. 0.032 .................WG 2416-65-F
DSCW085-E032......... 1.25 ............. 1.50 .............. 0.032 .................WG 2416-57-F
DSCW086-E015......... 1.25 ............. 1.50 .............. 0.015 .................WG 2416-57-E
DSCW087-E003......... 1.25 ............. 1.50 .............. 0.003 .................WG 2416-57-B
DSCW088-E005......... 1.25 ............. 1.50 .............. 0.005 .................WG 2416-57-C
DSCW089-E010......... 1.25 ............. 1.50 .............. 0.01 ...................WG 2416-57-D

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 62 2015

INSULATING WASHERS, NAAMS COMPONENTS, MISCELLANEOUS

Drawings are not to scale Slots and holes are centered unless otherwise noted

DSCW Series Insulating Washers

DSC Part No. I.D. O.D. Thickness Mat'l Other part numbers

DSCW501-E060......... 0.38 inch....... 1.00 inch........ 0.06 inch..... phenolic..... WG 6561-51
DSCW502-E130......... 0.42 inch....... 1.00 inch........ 0.13 inch..... phenolic..... WG 9132-51
DSCW503-E125......... 0.51 inch....... 1.25 inch........ 0.13 inch..... nylon.......... 56ZF3102824B
DSCW504-E130......... 0.53 inch....... 1.25 inch........ 0.13 inch..... phenolic..... WG 9134-51
DSCW505-E090......... 0.65 inch....... 1.25 inch........ 0.09 inch..... phenolic..... WG 9237-51
DSCW506-E130......... 0.65 inch....... 1.25 inch........ 0.13 inch..... phenolic..... WG 9053-51
DSCW507-E090......... 0.78 inch....... 1.38 inch........ 0.09 inch..... nylon..........
DSCW508-E130......... 0.89 inch....... 1.50 inch........ 0.13 inch..... nylon.......... CL 63-61
DSCW509-E090......... 0.90 inch....... 1.63 inch........ 0.09 inch..... phenolic..... WG 9239-51
DSCW513-E120......... 1.40 inch....... 4.75 inch........ 0.12 inch..... nylon.......... WG 8412-51
DSCW514-E060......... 1.50 inch....... 2.13 inch........ 0.06 inch..... phenolic..... CL 63-62
DSCW601-M300......... 7.0 mm.......... 20.0 mm......... 3.0 mm........ phenolic..... FSD 41405-51
DSCW602-M300......... 8.0 mm.......... 24.0 mm......... 3.0 mm........ phenolic..... FSD 41405-52
DSCW603-M300.........10.0 mm........ 29.0 mm......... 3.0 mm........ phenolic..... FSD 41405-53
DSCW604-M300.........13.0 mm........ 35.0 mm......... 3.0 mm........ phenolic..... FSD 41405-54

I.D. O.D.

DSCW Series Heat Treated Metric Washers 2015

DSC Part No. I.D. O.D. Thickness Mat'l/HT Other part no's

DSCW701-E060......... 7.0 ............... 13.2 ............. 3.4 ............. steel, Rc 38-45......... F620614
DSCW702-E130......... 9.0 ............... 17.7 ............. 3.4 ............. steel, Rc 38-45......... F620818
DSCW703-E130......... 10.2 ............. 25.0 ............. 4.5 ............. steel, Rc 38-45*........ F621025
DSCW704-E090......... 11.0 ............. 22.4 ............. 3.4 ............. steel, Rc 38-45......... F621022
DSCW705-E130......... 14.0 ............. 26.4 ............. 3.9 ............. steel, ASTM F436M.. F621227
DSCW706-E090......... 18.0 ............. 33.2 ............. 3.9 ............. steel, ASTM F436M.. F621634
DSCW707-E130......... 22.0 ............. 41.2 ............. 3.9 ............. steel, ASTM F436M.. F622042
DSCW708-E090......... 24.0 ............. 43.2 ............. 4.0 ............. steel, ASTM F436M.. F622244
DSCW709-E090......... 26.0 ............. 49.2 ............. 4.0 ............. steel, ASTM F436M.. F622450
DSCW710-E120......... 30.0 ............. 55.2 ............. 4.0 ............. steel, ASTM F436M.. F622756
DSCW711-E015......... 33.0 ............. 59.2 ............. 4.0 ............. steel, ASTM F436M.. F623060
DSCW712-E120......... 39.0 ............. 71.2 ............. 4.0 ............. steel, ASTM F436M.. F623672

*1020 HRS, carb & harden 1.0 deep 38-45 Rc

L-BLOCKS, STOP BLOCKS, PINS, PIN RETAINERS, ROUGH
LOCATORS, STUB SHAFTS and other components are available
from Douglas Stamping Company. We provide these details to
NAAMS, FORD, GM, Chrysler and other current and obsolete
specifications.

Below is a partial listing of the NAAMS part numbers available. Most

of the items are available in either Metric or English (inch) dimensions.

Metric is usually designated by an 'M' suffix. English either uses an 'E'

suffix or no suffix.

AAB100 - AAB401 Riser Angle Bracket

ACA001 - ACA223 Power Clamp Arm

ADP201 - ADP502 Dump Unit Stub Shaft and Spacer

AHB001 - AHB002 Riser Angle Bracket

ALB010 - ALB281 L-Block

APE061 - APE250 Locating Pin

APR010 - APR071 Locating Pin Retainer

APS061 - APS250 Locating Pin

ARA450 - ARA801 Riser Angle Bracket

ARE061 - ARE190 Locating Pin

ARL075 - ARL320 Rough Locators

ARP061 - ARP250 Locating Pin

ASC020 - ASC091 Crowned Stop Block

ASF020 - ASF091 Flat Stop Block

FSD, FS, CSS All stub shafts, stop blocks, L

blocks and washers

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342

http://dougstampco.com [email protected]

Page 63

NAAMS ASSEMBLY and STAMPING COMPONENTS

Drawings are not to scale Slots and holes are centered unless otherwise noted

NAAMS RISER ANGLE BRACKETS NAAMS components are part of the Auto Steel Partnership standard. For
engineering details and specific part numbers, please reference the Global
Series Assembly and Stamping standards:
AAB
ARA http://naamsstandards.org
AHB

English and
Metric

NAAMS DIE LIFT PIN WITH SPRING NAAMS ROUGH LOCATORS
RETAINER RING
Series
Series ARL
ARL P (with UHMW wear plate)
L01

NAAMS STOP BLOCKS NAAMS SCRAP CHUTE CHAIN HOOKS NAAMS and FSD DUMP UNIT
COMPONENTS
Series Series
M03 Series
ASC
ASF ADP Shafts, Bearings, Spacers and Keepers
FSD Shafts

Douglas Stamping Company (248) 542-3940 FAX (248) 542-6342 2015

http://dougstampco.com [email protected]

Page 64