After Market Product Guide Book

DeLaval Aftermarket Product Guide
Table of Contents
LINERS

TUBES

MQAH

Teat Dips
Concentrates & Dispensing Systems
Acids
Sanitizers
Detergents
Specialty Detergents
Hoofcare & Dispensing Systems

FARM SUPPLY

FEEDTECH

INSERVICE

USA Table of contents

27 R 10 Liner

Product Data

1,200 Milkings

Product Number
27 R 10 mm 94001585
Quantity: Case 100
Recommended Herds
• Average teats (1.85”-2” length)
Required Equipment
• Cluster:

––Nippled 10 mm milk inlets
• Average weight claws
• Original DeLaval 06 Shell
• Clean in place (one of the following):

––830766601 CIP Seal
––830452605 Jetter Cup
––94048981 Jetter Cup
• FDA compliant

Ask your DeLaval Dealer for information about your custom solution.

LINERS

27 R 10 Liner Mouthpiece Bore - 20 mm

Technical Data Lip Thickness - 2.8 mm
Use with average weight claws
TPA Range - 27.5 mm Barrel ID - 21.4 mm
Ideal for herds with
average length teats Touch Point - 3.6 inHg
Designed for fast milking
Barrel Length - 117 mm
For use with Original
DeLaval 06 Shell

SMT length - 149 mm Partial Vacuum Shut-off
Ideal for wide udder herds More complete shut-off when

vacuum reserve is limited

Short Milk Tube ID
over milk tube - 8 mm
For 10mm inlet claws

DeLaval Recommendations
• Claw vacuum range of 11-12.25 inHg at peak flow
• Insure nipples on claws are not sharp when installing new liners

Please note:
Using imitation 06 shells may result in poor teat treatment and massage due to improper length.
Do not use where low flow milking occurs routinely. Proper teat prep must be maintained with no bi-modal milk letdown at the beginning of milking or improper take-off settings at the end
of milking that allow over milking to occur.

is a registered trademark of Tetra Laval Holdings & Finance S.A. and “DeLaval” is a registered trade/servicemark of DeLaval Holding AB
© 2015 DeLaval Inc. DeLaval, 11100 North Congress Avenue, Kansas City, Missouri 64153-1296. www.delaval-us.com.

LINERS

27 S 12 Liner

Product Data

1,200 Milkings

Product Number
27 S 12 mm 94001685
Quantity: Case 100
Recommended Herds
• Small to average teats (1.85”-2” length)
• High production and/or fast milking herds
Required Equipment
• Cluster:

––Nippled 12 mm milk inlets
• Average weight claws
• Original DeLaval 06 Shell
• Clean in place (one of the following):

––830766601 CIP Seal
––830452605 Jetter Cup
––94048981 Jetter Cup
• FDA compliant

Ask your DeLaval Dealer for information about your custom solution.

LINERS

27 S 12 Liner Mouthpiece Bore - 20 mm

Technical Data Lip Thickness - 2.8 mm
Use with average weight claws
TPA Range - 27.5 mm Barrel ID - 21.4 mm
Ideal for herds with small
average length teats Touch Point - 4 inHg
Gentle on teat ends
Barrel Length - 117 mm
For use with Original
DeLaval 06 Shell

SMT length - 149 mm Partial Vacuum Shut-off
For wide udder herds

Short Milk Tube ID
over milk tube - 8 mm
For 12mm inlet claws

DeLaval Recommendations
• Claw vacuum range of 11-12.25 inHg at peak flow
• Insure nipples on claws are not sharp when installing new liners

Please note:
Using imitation 06 shells may result in poor teat treatment and massage due to improper length.
Do not use where low flow milking occurs routinely. Proper teat prep must be maintained with no bi-modal milk letdown at the beginning of milking or improper take-off settings at the end
of milking that allow over milking to occur.

is a registered trademark of Tetra Laval Holdings & Finance S.A. and “DeLaval” is a registered trade/servicemark of DeLaval Holding AB
© 2015 DeLaval Inc. DeLaval, 11100 North Congress Avenue, Kansas City, Missouri 64153-1296. www.delaval-us.com.

LINERS

29 R 10 Liner

Product Data

1,200 Milkings

Product Number
29 R 10 mm 94001885
Quantity: Case 100
Recommended Herds
• Long teats (1.9”-2”+ length)
Required Equipment
• Cluster:

––Nippled 10 mm milk inlets
• Average to heavy weight claws
• Original DeLaval 06 Shell
• Clean in place (one of the following):

––830061401 CIP Seal
––830766603 CIP Seal
––830452605 Jetter Cup
––94048881 Jetter Cup
• FDA compliant

Ask your DeLaval Dealer for information about your custom solution.

LINERS

29 R 10 Liner Mouthpiece Bore - 20.3 mm

Technical Data Lip Thickness - 3.1 mm
Use with average to heavy weight claws
TPA Range - 28.8 mm Barrel ID - 21.8 mm
Ideal for herds with
long teats Touch Point - 3.4 inHg
Designed for fast milking
Barrel Length - 112.4 mm
For use with Original
DeLaval 06 Shell

SMT length - 138 mm Cogwheel Style Partial
Vacuum Shut-off
For average width
udder herds

Short Milk Tube ID
over milk tube - 9 mm
For 10mm inlet claws

DeLaval Recommendations
• Claw vacuum range of 10.5-12 inHg at peak flow

––Herds with risk of over-milking: 10.5-11.25
––Herds with little or no risk: 11.25-12
• Insure nipples on claws are not sharp when installing new liners

Please note:
Using imitation 06 shells may result in poor teat treatment and massage due to improper length.
Do not use where low flow milking occurs routinely. Proper teat prep must be maintained with no bi-modal milk letdown at the beginning of milking or improper take-off settings at the end
of milking that allow over milking to occur.

is a registered trademark of Tetra Laval Holdings & Finance S.A. and “DeLaval” is a registered trade/servicemark of DeLaval Holding AB
© 2015 DeLaval Inc. DeLaval, 11100 North Congress Avenue, Kansas City, Missouri 64153-1296. www.delaval-us.com.

LINERS

tePartohmeoatleths!

DeLaval Clover™ Liner

A Liner Family Proven to Promote Teat Health

2,500 Milkings

Product Numbers Recommended Herds
DeLaval Clover Liner R 10 mm 834174790 • Small to average size teats (1.75"-2" teats)
DeLaval Clover Liner SR 10 mm 834118990
DeLaval Clover Liner R 12 mm 834138990 • Average to Large size Teats (2" and up) -
DeLaval Clover Liner SR 12 mm 834139890 834184690
DeLaval Clover Liner NC 12 mm 834175090
DeLaval Clover Liner R 12 mm L 834184690 Required Equipment
Quantity: Case 100 • Clusters:

Special Characteristics ––Nippled 10 mm milk inlets
• Patented Clover design ––Nippled 12 mm milk inlets
• Helps promote teat end health ––Nipple-less 12 mm (Clover NC)
• Fast, complete milk out
• Low mouth piece vacuum • Works with all claw weights
• Adapts to the teat
• Patented medium reinforced shut-off • Original DeLaval 06 shell

• Cleaning Seals (one of the following):
––87376202 CIP Seal
––830452605 Jetter cup
––830605001 Wash rack
––87047701 CIP Seal Adaptor – GEA
Compatible
––Cleaning seals for Clover L- 834184690
––90995280 CIP seal
––88166201 Jetter Cup

• FDA compliant

• Teat measuring tool 86263780

Ask your DeLaval Dealer for information about your custom solution.

LINERS

DeLaval Clover™ Liner Mouthpiece Bore - 20.3 mm
For average width teats
Technical Data Clover L Mouthpiece Bore - 22 mm
For larger teats
Mouth Piece Depth - 27mm Lip Thickness - 3 mm
(Standard) Use with average
Ideal for herds with short to heavy claws
to average length teats
Clover L Mouth Piece Depth - 37mm Touch Point - 3.5 inHg
(Large) Designed for fast milking
Ideal for herds with larger teats

Barrel Length - 113 mm
For use with Original
DeLaval 06 Shell

SMT length Tapered barrel/concave
10 mm R - 149 mm For improved slip resistance.
10 mm SR - 134 mm
12 mm SR - 134 mm Shut-off style
12 mm NC - 159 mm DeLaval Clover SR Liner complete shut-off
For average to wide DeLaval Clover NC Liner complete shut-off
udder herds DeLaval Clover R Liner partial shut-off

The large, rounded
corners keep the milk
flowing and the thin
side walls optimize
the teat massage.

SR NC R

DeLaval Recommendations
• Emphasis on teat treatment: 10.1"-10.7" Hg claw vacuum at peak milk flow
• Emphasis on fast milking: 11.0"-11.6" Hg claw vacuum at peak milk flow
• Recommended take off setting: 2x 1.2-0.9 lbs/minute, 3X 1.6-1.2 lbs/minute
• Pulsation ratio: 65/35/Beats/minute: 60
• Ensure nipples on claws are not sharp when installing new liners
• Care should be taken when loading or unloading the cluster into sharp/drilled/

or NON-DeLaval CIP candlesticks
• Do not use retract function to remove clusters from wash racks
• Ensure good tube alignment to secure good milking performance
• Ensure correct dosage of detergent according to DeLaval label recommendations
• Replace after 2,500 milkings or 150 washes, whichever comes first

Please note:
Using imitation 06 shells may result in poor teat treatment and massage due to improper length.
Do not use where low flow milking occurs routinely. Proper teat prep must be maintained with no bi-modal milk letdown at the beginning of milking or improper take-off settings at the end
of milking that allow over milking to occur.

is a registered trademark of Tetra Laval Holdings & Finance S.A. and “DeLaval” is a registered trade/servicemark of DeLaval Holding AB
© 2016 DeLaval Inc. DeLaval, 11100 North Congress Avenue, Kansas City, Missouri 64153-1296. www.delaval-us.com.

LINERS





















DeLaval Blue Silicone

Product Data

Milk Tube Special Characteristics
• DeLaval Blue Silicone, our best tubing available!
Product Numbers • Lasts two times longer than rubber milk hose
5/8 in • Superior resistance to tearing
90842380 (82 feet) • Highly resistant to butterfat and discoloration
• Lightweight, flexible tube allows for proper
3/4 in
90843580 (49 feet) unit alignment
• Complies with FDA and BFR regulations

7/8 in
91724981 (32 feet)

Pulsation Tube

Product Number
9/32 in – Twin
90846380 (82 feet)

Ask your DeLaval Dealer for information about your custom solution.

is a registered trademark of Tetra Laval Holdings & Finance S.A. and “DeLaval” is a registered trade/servicemark of DeLaval Holding AB
© 2015 DeLaval Inc. DeLaval, 11100 North Congress Avenue, Kansas City, Missouri 64153-1296. www.delaval-us.com.

TUBES

DeLaval MM Lite Tubing

Product Data

Milk Tube Special Characteristics
• Provides “best fit” connections
Product Numbers
5/8 in • Results in extremely smooth, hygienic
830790901 (108 in) milk surface

3/4 in • Strong, flexible, and lightweight
830790401 (108 in)
• Improved unit alignment, resulting
in fewer liner slips

• FDA compliant

Pulsation Tube

Product Number
9/32 in – Twin
830759101 (108 in)

Ask your DeLaval Dealer for information about your custom solution.

is a registered trademark of Tetra Laval Holdings & Finance S.A. and “DeLaval” is a registered trade/servicemark of DeLaval Holding AB
© 2015 DeLaval Inc. DeLaval, 11100 North Congress Avenue, Kansas City, Missouri 64153-1296. www.delaval-us.com. LIT330204-1114

TUBES

DeLaval Poled Rubber

Product Data

Milk Tube Special Characteristics
• Provides “best fit” connections
Product Numbers
5/8 in • Results in extremely smooth, hygienic
830578303 (60 in) milk surface
830578302 (78 in)
830578301 (108 in) • High resistance to abrasions, cleaners and
cold weather
9/16 in
832224516 (108 in) • Recovers well after compression or kinking

• Strong enough to resist damage from
pinch valves

• FDA compliant

Pulsation Tube

Product Numbers
9/32 in – Twin
832224666 (108 in)

Short Pulse

830350081 (7.5 in)
830350082 (8.5 in)

Ask your DeLaval Dealer for information about your custom solution.

is a registered trademark of Tetra Laval Holdings & Finance S.A. and “DeLaval” is a registered trade/servicemark of DeLaval Holding AB
© 2015 DeLaval Inc. DeLaval, 11100 North Congress Avenue, Kansas City, Missouri 64153-1296. www.delaval-us.com. LIT330203-1114

TUBES

DeLaval Rubber Milk Tube on Coil

Product Data

Milk Tube Special Characteristics
• Superior tear resistance to blue line tubing
Product Numbers
5/8 in and resists splitting on nipples
94022280 (65 feet)
• Ability to cut tubing to exact length needed
3/4 in
834114080 (50 feet) • Resists coiling

Pulsation Tube • Stays on nipples

Product Number • Convenient packaging allows for easy
9/32 in transport and dispensing
834121780 (100 feet)
• Economical tubing solution

• FDA compliant

Ask your DeLaval Dealer for information about your custom solution.

is a registered trademark of Tetra Laval Holdings & Finance S.A. and “DeLaval” is a registered trade/servicemark of DeLaval Holding AB
© 2015 DeLaval Inc. DeLaval, 11100 North Congress Avenue, Kansas City, Missouri 64153-1296. www.delaval-us.com.

TUBES

DeLaval PVC Tubing

Product Data

Milk Tube • An economical alternative to rubber tubing

Product Numbers • Allows for visibility of milk flow and blockages
in twin pulse tube
5/8 in
87569981 (100 feet) • Best used in warm climates or seasons
87569980 (500 feet)
• FDA compliant
9/16 in
87569680 (100 feet)
87569681 (500 feet)

Pulsation Tube

Product Numbers
1/4 in – Twin 87568880 (100 feet)
3/8 in – Twin 87569380 (100 feet)
9/32 in – Twin
87569080 (100 feet)
87569081 (500 feet)
Short pulse 9/32 x 7.5 in 87568983 (Case 100)
Short pulse 9/32 x 9 in 87568980 (Case 100)

Special Characteristics

Ask your DeLaval Dealer for information about your custom solution.

is a registered trademark of Tetra Laval Holdings & Finance S.A. and “DeLaval” is a registered trade/servicemark of DeLaval Holding AB
© 2015 DeLaval Inc. DeLaval, 11100 North Congress Avenue, Kansas City, Missouri 64153-1296. www.delaval-us.com.

TUBES

Barrier Dyne 10™

Conditioning Barrier Teat Dip

Part Numbers Features/Benefits

Barrier Dyne 10 15 gal 7409002 • Formulated with 1% Iodine proven effective
germicide.
Barrier Dyne 10 55 gal 7409001
• Ready to use formula.
Barrier Dyne 10 5 gal 7409008
• Effective in challenging conditions.
Barrier Dyne 10 275 gal 7409275
• Field proven, reliable formula.
Description
• 10% glycerin helps maintain healthy teats.
Barrier-Dyne 10™ is specifically formulated to
provide needed skin conditioning properties • NPE Free.
for your cows’ teats and give added protection
during times of heavy environmental challenges • Barrier film provides protection between
or inclement weather. Barrier-Dyne 10™ is a 1% milkings.
available iodine (10,000 p.p.m titratable iodine)
barrier teat dip. Barrier-Dyne 10™ forms a film on
the teat to prolong protection against mastitis-
causing pathogens. Barrier-Dyne 10™ contains
10% Glycerin to aid in keeping teats soft and to
help prevent chapping in harsh weather.

CHEMTREC EMERGENCY NUMBER: 1-800-424-9300

is a registered trademark of Tetra Laval Holdings & Finance S.A. and “DeLaval” is a registered trade/servicemark of DeLaval Holding AB
© 2015 DeLaval Inc. DeLaval, 11100 North Congress Avenue, Kansas City, Missouri 64153-1296. www.delaval-us.com.

MQAH - teat dips

Blockade™

Premium Barrier Iodine Post-Dip

Part Numbers • Contains Advanced Conditioning Technology™
(ACT), a proven aid in keeping skin tissue
Blockade 15 gal 880142002 healthy.

Blockade 275 gal Tote 880142275 • NMC protocol and field proven to reduce new
intramammary infections.
Blockade 55 gal 880142001
• NPE Free
Blockade 5 gal 880142008
• Increases income by reducing mastitis
Description treatment costs and lost production.

Blockade® is a flexible 1% iodine barrier teat dip • Delivers 1.0% iodine with 12% emollient,
formulated with the high free iodine technology making it the ideal barrier dip for overcoming
I-tech2™ and a 12% emollient system with severe environmental conditions and sanitation
Advanced Conditioning Technology™ (ACT) challenges.
and Allantoin for intensive skin therapy and
conditioning. Blockade is uniquely designed for • Germ-killing activity proven to reactivate
challenging conditions for when a barrier dip whenever barrier is rehydrated by moist
is needed to maintain milk quality programs. bedding, mud and manure or rain.
Blockade has been tested in university and
commercial herd trials in the United States • Provides a 12% cosmetic emollient system,
following recommended National Mastitis making it the ready-to-use barrier teat dip that
Council protocols. is as gentle to teats as it is powerful against
mastitis.
Features/Benefits
• I-tech2 technology provides 14-20 PPM of • I-tech2 and ACT work together to help fight
mastitis pathogens and improve teat health.
Stabilized High Free Iodine.
• University tested using National Mastitis Council
protocols.

is a registered trademark of Tetra Laval Holdings & Finance S.A. and “DeLaval” is a registered trade/servicemark of DeLaval Holding AB
© 2015 DeLaval Inc. DeLaval, 11100 North Congress Avenue, Kansas City, Missouri 64153-1296. www.delaval-us.com.

MQAH - teat dips

























Pre-Post 5000™

Pre and Post Iodine Teat Dip

Part Numbers Features/Benefits

Pre-Post 5000 275 gal Tote 7415275 • Formulated with 0.5% Iodine proven effective
germicide.
Pre-Post 5000 55 gal 7415001
• Ready-to-use formula.
Pre-Post 5000 15 gal 7415002
• Ideal for year round use.
Pre-Post 5000 5 gal 7415008
• 5% glycerin helps maintain healthy teats.
Description
• Field proven, reliable formula.
Pre-Post 5000 is Universal’s premier 0.5% iodine
teat dip. Specially formulated to be gentle to • NPE Free.
milkers’ hands and cows’ teats, combined with
5% glycerin, Pre-Post 5000 delivers superior • Multiple applications: dipped, sprayed or
skin conditioning properties. Pre-Post 5000 is foamed
recommended for farms wanting to use 1 dip.
It is well balanced for effective mastitis control
and skin conditioning to help today’s dairy
producer make quality milk.

CHEMTREC EMERGENCY NUMBER: 1-800-424-9300

is a registered trademark of Tetra Laval Holdings & Finance S.A. and “DeLaval” is a registered trade/servicemark of DeLaval Holding AB
© 2015 DeLaval Inc. DeLaval, 11100 North Congress Avenue, Kansas City, Missouri 64153-1296. www.delaval-us.com.

MQAH - teat dips

Prima™

Pre- and Post-Sanitizing Teat Dip

Part Numbers Features/Benefits
Prima Teat Dip 275 gal 1266275
Prima Teat Dip 15 gal 1266002 • Contains Accelerated Hydrogen Peroxide,
Prima Teat Dip 5 gal 1266008 a stabilized proprietary formula.
Prima Teat Dip 55 gal 1266001
• Reduces incidence of mastitis – saves money.
Description
Prima is pre post dip formulated with Accelerated • Less potential for irritation, and promotes better
Hydrogen Peroxide™ and 5% glycerin for soft, cow comfort.
supple teat conditioning.
• Contains 5% glycerin.

• Excellent disinfecting and cleaning properties.

• Ideal for all year round use.

• NPE Free.

• VMS compatible.

• Multiple applications: dipped, sprayed or
foamed.

• Protocol tested according to NMC guidelines.

CHEMTREC EMERGENCY NUMBER: 1-800-424-9300

is a registered trademark of Tetra Laval Holdings & Finance S.A. and “DeLaval” is a registered trade/servicemark of DeLaval Holding AB
© 2015 DeLaval Inc. DeLaval, 11100 North Congress Avenue, Kansas City, Missouri 64153-1296. www.delaval-us.com.

MQAH - teat dips

Proteat™

Sanitizing Iodine Teat Dip/Spray

Part Numbers Features/Benefits
• Formulated with 1% Iodine proven effective
Proteat Teat Dip 275 gal 9661275
germicide.
Proteat Teat Dip 55 gal 9661001 • Ready-to-use formula.
• Effective in challenging conditions.
Proteat Teat Dip 5 gal 9661008 • Field proven, reliable formula.
• 2% glycerin helps maintain healthy teats.
Proteat Teat Dip 15 gal 9661002 • NPE Free.

Description

Proteat contains an iodophor complex providing
1% available iodine in a solution of glycerin,
buffering and complexing agents. Used as a teat
dip/spray for dairy cows. Recommended for
postmilking, but economical for use as a pre-dip
on farms with heavy environmental challenges.

CHEMTREC EMERGENCY NUMBER: 1-800-424-9300

is a registered trademark of Tetra Laval Holdings & Finance S.A. and “DeLaval” is a registered trade/servicemark of DeLaval Holding AB
© 2015 DeLaval Inc. DeLaval, 11100 North Congress Avenue, Kansas City, Missouri 64153-1296. www.delaval-us.com.

MQAH - teat dips

Proteat™ 2

Sanitizing Iodine Teat Dip/Spray

Part Numbers Features/Benefits
• Formulated with 0.5% Iodine proven
Proteat 2 15 gal 7414002
effective germicide.
Proteat 2 275 gal 7414275 • Ready-to-use formula.
• Effective in challenging conditions.
Proteat 2 300 gal 7414300 • Field proven, reliable formula.
• 2% glycerin helps maintain healthy teats.
Proteat 2 55 gal 7414001 • NPE Free formula.

Description

Proteat 2 contains an iodophor complex
providing 0.5% available iodine in a solution of
2% glycerin, buffering and complexing agents.
Used as a teat dip/spray for dairy cows. Provides
an economical pre and post-milking sanitation
solution.

CHEMTREC EMERGENCY NUMBER: 1-800-424-9300

is a registered trademark of Tetra Laval Holdings & Finance S.A. and “DeLaval” is a registered trade/servicemark of DeLaval Holding AB
© 2015 DeLaval Inc. DeLaval, 11100 North Congress Avenue, Kansas City, Missouri 64153-1296. www.delaval-us.com.

MQAH - teat dips

Quarter Mate Plus

Premium Iodine Pre-Dip

Part Numbers Features/Benefits

Quarter Mate Plus 15 gal 880128002 • IoMaxx®, our exclusive pH adjusted iodine
technology, generates 12-18 ppm of fast-
Quarter Mate Plus 275 gal Tote 880128275 acting, “free” iodine for outstanding broad
spectrum performance.
Quarter Mate Plus 5 gal 880128008
• Contains Advanced Conditioning Technology™
Quarter Mate Plus 55 gal 880128001 (ACT), a proven aid in the healing of chapped
and irritated teat skin.
Description
• In vitro tests showed complete kill of Staph.
Quarter Mate® Plus is a 0.10% iodine teat aureus and E. coli (greater than 7.6 log
dip with 2% glycerin making it an ideal pre- reduction).
dip and a low risk for iodine residues in milk
and has performance proven track record in • Proven reduction in clinical mastitis cases,
milk quality programs in herds of any size. and showed fewer combined clinical and
Quarter Mate Plus is formulated with the subclinical intramammary infections.
IoMaxx® free iodine technology and Advanced
Conditioning Technology™ (ACT) for excellent • NPE free formulation.
teat skin conditioning and teat cleaning. Quarter
Mate Plus has been tested in university and
commercial herd trials in the United States
following recommended National Mastitis
Council protocols. Quarter Mate Plus has been
a key tool in milk quality programs and mastitis
management for dairy producers since 1982.

CHEMTREC EMERGENCY NUMBER: 1-800-424-9300

is a registered trademark of Tetra Laval Holdings & Finance S.A. and “DeLaval” is a registered trade/servicemark of DeLaval Holding AB
© 2015 DeLaval Inc. DeLaval, 11100 North Congress Avenue, Kansas City, Missouri 64153-1296. www.delaval-us.com.

MQAH - teat dips