2020 Ben Moore Product Guide Complete Book

Professional Masonry Benjamin Moore®

Moorlastic® Patching Compound

Ideal for repairing interior and exterior cracks in masonry, stucco, brick, glass, wood, wallboard,
as well as non-ferrous and primed ferrous metals—the formulas provide a non-penetrable seal
against wind driven rain.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
Time (± 2%) –
(Sq. Ft.) (Avg.) –
–
0051 Moorlastic® Patching Compound - –– –– – –
Textured Knife Grade

0052 Moorlastic® Patching Compound - –– –– –
Textured Brush Grade

0053 Moorlastic® Patching Compound - –– –– –
Smooth Knife Grade

0054 Moorlastic® Patching Compound - –– –– –
Smooth Brush Grade

Product Description Features/Benefits
• Can be used on a wide variety of surfaces
0051, 0053: Moorlastic® Knife Grade Patching Compound is ideal for repairing larger cracks (1/16" to 1/4") • Provides a non-penetrable seal against wind driven rain

on exterior masonry and stucco surfaces. It is specially formulated for patching and sealing joints between • Can be used on a wide variety of surfaces
masonry, stucco, brick, glass, wood, and wallboard. It may also be used on non-ferrous and primed ferrous • Provides a non-penetrable seal against wind driven rain
metals. The formula provides a non-penetrable seal against wind driven rain.
Available Colors: White

0052, 0054: Moorlastic® Brush Grade Patching Compound is ideal for repairing hairline cracks on exterior

masonry and stucco surfaces. It is specially formulated to bridge hairline cracks in masonry, stucco, brick,
mobile home roof seams, wood, and wallboard. The formula provides a non-penetrable seal against wind
driven rain. This product is not for use below grade or under water.
Available Colors: White

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 49
†For the most up-to-date MPI specifications, visit www.mpi.net

Professional Masonry

Ultra Spec® Masonry Primers & Sealers

Primers and sealers formulated to penetrate, fill, seal, and finish new or previously painted masonry
surfaces in one application, providing the proper foundation for subsequent finish coats.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
Time (± 2%)
(Sq. Ft.) (Avg.)

0452 Ultra Spec® Masonry Acrylic Latex Satin-FIL 2-3 41.0 100-200 5 < 50 VOC Qualifies for LEED® 2009
hours

0571 Ultra Spec® Masonry Int/Ext High Build Block 2-3 53.4 75-100 10 < 50 VOC MPI 4, 4 X-Green™; Eligible for LEED® v4 credit;
Filler hours Health Product Declaration available;
Qualifies for CHPS low emitting credit

0608 Ultra Spec® Masonry Int/Ext 100% Acrylic 4 hours 17.8 200-400 1 < 50 VOC MPI 3; Eligible for LEED® v4 credit;
Sealer Qualifies for CHPS low emitting credit;
Health Product Declaration available;

CDPHv1 Emission certified

0609 Ultra Spec® Masonry Int/Ext Acrylic High Build 4 hours 24.3 350-400 1 < 50 VOC MPI 3; Eligible for LEED® v4 credit;
Masonry Primer Qualifies for CHPS low emitting credit;
Health Product Declaration available;

CDPHv1 Emission certified

Product Description Features/Benefits

0452: Formulated to fill, seal, and finish in an easy one-coat spray application. Ideal for interior and exterior • Beautiful and decorative satin finish
• Withstands washing and scrubbing
cured cinder block, poured/pre-cast concrete, brick, and other masonry structures, and incidental primed metal • Fills cracks and voids for a uniform finish
and wood. May be used on interior wallboard and cured plaster. • Fast-drying
Available Colors: White

0571: A full-bodied and high-build, latex block filler specially formulated for use as a preparatory coating • Fills small cracks and voids in concrete, cinder block, and rough masonry
• Can be used with interior or exterior Benjamin Moore® finishes
to create a less porous and smoother painting surface. This product is easy to brush or spray.

Available Colors: White

0608: Designed to penetrate and seal the surface of new or previously painted masonry surfaces providing • Reduces the porosity of masonry surfaces
• Provides excellent surface adhesion
the proper foundation for subsequent finish coats. The clear can also be used as a decorative sealer on interior • High alkali-resistance - up to pH 13
or exterior masonry surfaces. • Tintable
Available Colors: White, Clear

0609: Designed to penetrate and seal the surface of new or previously painted masonry surfaces providing • Reduces the porosity of masonry surfaces
• Provides excellent surface adhesion
the proper foundation for subsequent finish coats. • High alkali-resistance - up to pH 13
Available Colors: White • Higher-hiding
• Tintable

50 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net

Professional Masonry Benjamin Moore®

Ultra Spec® Masonry Elastomeric Waterproof Coating

Flexible, 100% acrylic elastomeric coatings that provide a waterproof finish to protect masonry
structures from damage due to weathering and moisture.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
Time (± 2%) –
(Sq. Ft.) (Avg.) –

0359 Ultra Spec® Masonry Elastomeric Waterproof 12 hours 38.6 80-100 7.7 < 100 VOC
Coating - Flat

0360 Ultra Spec® Masonry Elastomeric Waterproof 12 hours 45.2 60-80 9 < 100 VOC
Coating - Low Lustre

Product Description Features/Benefits
• Breathable finish allows interior moisture to escape without
0359, 0360: A high-build, elastomeric coating that is designed to beautify and protect masonry structures damage to the film
• Provides a waterproof finish that protects structures from
from damage due to weathering and moisture intrusion. When applied as directed, at up to 20 mils wet film moisture damage
thickness per coat, this product fills pores and bridges minor surface cracks to create a monolithic film that • Provides a mildew-resistant coating
protects masonry from the weather’s deteriorating effects. • 200% elongation (0359); 300% elongation (0360)
Available Colors: White. Tint bases available for all colors. • Bridges cracks up to 1/32"
• Reduces the porosity of masonry surfaces
• Provides excellent surface adhesion
• High alkali resistance - up to pH 13
• Higher-hiding

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 51
†For the most up-to-date MPI specifications, visit www.mpi.net

Applicators

Custom-Crafted Applicators

Premium paints require premium applicators. That’s why our Custom-Crafted Brushes and Rollers feature high-quality
natural and synthetic materials and are designed specifically for Benjamin Moore. They are ideal for the painter who
demands excellent performance and flawless results.

Custom-Crafted Brushes Available In

Product Description Angle Sash: 1½", 2", 2½", 3"
Thin Angle Sash: 1", 1½", 2", 2½", 3"
Nylon & Polyester: Blended to deliver excellent performance. The right amount of flex and taper for even coverage. Exceptional paint Flat Sash: 2", 2½", 3"
Varnish: 2", 2½", 3"
capacity for speedy results. Recommended for latex and acrylic paints, and oil-based enamels. Wall: 3", 4"

Soft Nylon & Polyester: Blended to provide extra flex for smooth application, fewer brush marks, and better paint capacity. The soft Angle Sash: 1½", 2", 2½"

feel of 100% nylon with the durability of a nylon/polyester brush. Recommended for all paints, especially semi-gloss and satin finishes. Angle Sash: 2", 2½", 3"
Flat Sash: 2", 2½", 3"
Extra-Firm Nylon & Polyester: Maintains a sharp edge for controlled painting, even in hot or humid conditions. Exceptional paint Varnish: 2", 2½", 3"
Angle Sash: 2½", 3"
capacity for speedy results. Recommended for all paints, especially thick or heavy coatings.
Angle Sash: 1½", 2", 2½"
Chinex®: Made with DuPont® synthetic bristles to deliver a smooth finish. Low moisture absorption for stiffness retention and easy clean-up. Varnish: 1½", 2", 3"
Angle Sash: 1½", 2", 2½"
Recommended for all paints, especially fast-drying or high-build coatings. Flat Sash: 1½", 2", 2½"
Varnish: 2", 3", 4"
100% Polyester: Made with chemically tipped filaments to virtually eliminate brush marks. Superior smoothness and excellent paint Angle Sash: 1½", 2", 2½"
Flat Sash: 2", 2½", 3"
capacity. Recommended for all paints, especially lighter or thinner coatings. Acrylic & Oil
Stain Brush: 4"
White China Bristle: Made with naturally soft tips to virtually eliminate brush marks. Ideal for interior woodwork, enamels, or marine

applications. Recommended for oil-based paints, especially enamels and varnishes.

Black China Bristle: Offers outstanding paint capacity. Delivers a smooth finish. Especially suited for high-productivity applications.

Recommended for oil-based paints, especially enamels and urethanes.

Exterior Stain: Premium performance from its unique combination of synthetic and natural bristle blend. Holds more stain for less dipping.

Delivers a smooth, even finish on siding, shakes, decks, fences, masonry, and rough wood. Recommended for all stains, sealers, and urethanes.

52 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.

†For the most up-to-date MPI specifications, visit www.mpi.net

Applicators

Custom-Crafted Roller Covers ⅜" nap: Available In Benjamin Moore®
½" nap: 7", 9"
Product Description ¾" nap: 7", 9", 18"
1" nap: 9"
High-Capacity: Features dense, golden yellow fabric that resists matting for complete coverage and minimal spatter. 1¼" nap: 9"
3/16" nap: 9"
Outstanding paint capacity for speedy application. Recommended for exterior flat paints and stains. ⅜" nap: 7", 9"
½" nap: 4", 7", 9", 18"
Shed-Resistant: Dense, white woven fabric resists matting and reduces spatter. Delivers a smooth, lint-free finish. ¾" nap: 9"
5/16" nap: 9"
Recommended for interior paints, enamels, and industrial coatings. 9"

Microfiber: Delivers a spray-like finish. The smoothest finish available from a Benjamin Moore® applicator. Recommended ⅜" nap: 9"
½" nap: 9"
for all paints and enamels. ¾" nap: 9"
½" nap: 9"
Lambswool: Hand-sewn, buff-colored, single-piece shearling pelts without multiple seams or gaps to provide complete ¾" nap: 9"

coverage. Sets the standard for professional-quality finish with all paints, including latex, enamels, and varnishes. Recommended ⅜" nap: 9"
for interior and exterior coatings. ½" nap: 9"

Poly/Wool: Golden yellow fabric blend of 50% lambswool and 50% polyester. Wool provides maximum paint capacity and a 4½" High-Capacity: ⅜" & ½" nap
4½" Shed-Resistant: ⅜" & ½" nap
smooth finish. Polyester resists matting and adds resilience in hot weather or when using latex paints. Recommended for exterior 6½" High-Capacity: ⅜" & ½" nap
lower sheen paints, such as flat and satin, and stains. 6½" Shed-Resistant: ⅜" & ½" nap
4½" Mohair: ¼" nap
All-Purpose: Great choice for fast, smooth results. This shed-resistant fabric works with all paints, enamels, and primers. 4½" Lint-Free Foam: N/A

Recommended for interior coatings. ⅜" nap: 9"
½" nap: 9"
Mini-Roller Refills: Matches full-size Benjamin Moore® roller covers for seamless blending of trim with the wall or ceiling. ⅜" nap: 18"

The open, 3/4" core makes cleaning easy. Refills offer more value because the mechanics are built into the frame instead
of the roller.

Aura® Roller Covers: Specifically designed for Benjamin Moore® super-premium Aura® paints. Optimal balance of surface

smoothness and hide, while also offering shed resistance.
Also available: 3-piece painting kit

The Right Roller Cover for the Right Surface

Nap or pile is the length of fabric that sticks up from the backing. Nap heights vary from 3/16" to 1¼".
Typically, the smoother the surface being coated, the shorter the nap.

Nap Surface

3/16" Smooth: drywall, metal, smooth wood, untextured plaster, wallboard
⅜" to ½" Medium: acoustical tile, lightly textured plaster or wood, paneling, sand finishes
¾" to 1¼" Rough: brick, concrete, corrugated metal, rough wood, Spanish plaster, stucco, textured ceiling or walls

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 53
†For the most up-to-date MPI specifications, visit www.mpi.net

Applicators

Professional Quality Applicators

Professional painters demand applicators with the perfect mix of quality and value.
That’s why our Professional Quality Applicators are designed to deliver the performance
and durability required by professional paint contractors.

Professional Quality Brushes Available In
Product Description
Angle Sash: 1 ½", 2", 2½", 3"
Polyester/Nylon: A blend of tapered nylon and polyester filaments. Flat Sash: 1 ½", 2", 2½", 3"
Extra firm composition for stronger, stiffer touch and chiseled trim. Varnish: 1 ½", 2", 2½", 3"
Sanded and polished hardwood handle and copper ferrule. Wall: 4"

Professional Quality Roller Covers

Product Description Available In
9"
High Capacity: High-quality knitted synthetic fabric. Excellent paint ⅜" nap: 9"
pick-up and release. Resists matting. Ideal for use with any Benjamin Moore® ½" nap: 9"
paint on any type of surface. Heavy-duty polypropylene is resistant to water ¾" nap: 9"
and solvents. ¼" nap: 4", 9"
Shed Resistant: High-quality blend of white woven fabric for maximum ⅜" nap: 4", 9"
protection against shedding. Lint-free finish. Ideal for use with any Benjamin ½" nap:
Moore® paint on any type of surface. Heavy-duty polypropylene core with-
stands water and solvents.

Also available: 6-piece painting kit; 4" and 9" roller frames

54 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.

†For the most up-to-date MPI specifications, visit www.mpi.net

BENJAMIN MOORE® COROTECH®

Alkyd Primers

Universal Metal Primer

A high-performance, one-component, quick-dry, rust-inhibitive metal primer, formulated for
use on ferrous metal substrates.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V131✦ Universal Metal Primer Time (± 2%) –
(Sq. Ft.) (Avg.)

4 hours 60.0 450-500 2 > 250 VOC

Product Description Features/Benefits
• High-solids content
V131: The phenolic alkyd resin formulation allows for a wide variety of intermediate and finish coats. • Can be recoated in just 4 hours
• Ideal for use in metal shops and industrial maintenance
The quick dry and recoat times allow for fast turn-around of production work. The barrier protection and • Can be applied with electrostatic sprayers (once the product is polarized)
rust-inhibitive pigmentation leaves a film that prevents corrosion for many years. This product may be used • Suitable for USDA-inspected facilities
as a tie coat over existing coatings that will be finished with a high performance coating. It provides corrosion
resistance for both interior and exterior steel surfaces.
Available Colors: White, Red, Gray
✦Product available in lower-VOC formulation.

Prep All Universal Metal Primer

An economical, single-component primer engineered to provide corrosion protection
on all ferrous metals.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V132✦ Prep All Universal Metal Primer Time (± 2%) MP 76
(Sq. Ft.) (Avg.)

4 hours 50.0 350-450 2.1 > 250 VOC

Product Description Features/Benefits
• Dry to touch in 30 minutes
V132: This quick-drying formula provides fast production times, and its alkyd resin formulation allows for • Tie coat over many existing coatings
• Corrosion protection on all ferrous metals
application of a wide variety of intermediate and finish coat products. Formulated for air spraying, it can
also be applied by airless and HVLP sprayers, brushes, or rollers.
Available Colors: White, Red, Gray
✦Product available in lower-VOC formulation.

56 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.

†For the most up-to-date MPI specifications, visit www.mpi.net.

Alkyd Primers

Alkyd Shop Coat Primer

A quick-drying formulation that can withstand mild-to-moderate atmospheric conditions. It provides
a protective barrier and can be top coated with a variety of finishes, including hot solvent top coats.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications† Benjamin Moore® Corotech®
V133✦ Alkyd Shop Coat Primer Time (± 2%) –
(Sq. Ft.) (Avg.)

2 hours 53.0 350-450 2.2 > 250 VOC

Product Description Features/Benefits
• Dry to touch in 30 minutes, recoat in 2 hours
V133: Alkyd Shop Coat Primer can be used as a temporary coat for transporting fabricated pieces, • Provides barrier protection in mild-to-moderate corrosive environments
• Meets SSPC Paint 15, Type 1 (V133-20 Red)
which can then be blasted and recoated at the job site. In interior non-corrosive environments, this
primer can be left uncoated.
Available Colors: Red, Gray
✦Product available in lower-VOC formulation.

Alkyd Fabrication Primer

A primer formulated for use in mild-to-moderate exposures, with excellent wetting properties
that allow application to marginally prepared surfaces.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V140 Alkyd Fabrication Primer Time (± 2%) MPI 79
(Sq. Ft.) (Avg.)

8 hours 57.0 430-500 2 > 250 VOC

Product Description Features/Benefits
• Dry to touch in 2 hours, recoat in 8 hours
V140: Formulated to inhibit corrosion, this primer provides years of protection when applied properly. • Excellent wetting properties for maximum penetration
• Designed for structural steel, railings, and shop coat applications
It can be top coated with most finishes that do not contain strong solvents. • Corrosion-inhibiting formula protects against rust
Available Colors: White, Red, Gray • Suitable for use in USDA-inspected facilities

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 57
†For the most up-to-date MPI specifications, visit www.mpi.net.

Alkyd Primers

Shop Primer

An economical steel primer for commercial use in mild-to-moderate exposures.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V142✦ Shop Primer Time (± 2%) –
(Sq. Ft.) (Avg.)

2 hours 53.0 350-400 2.3 > 250 VOC

Product Description Features/Benefits
• Economical protective coat
V142: This product is ideal as a temporary transport coat on fabricated pieces or as an economical barrier • Accepts a wide variety of top coats
• Dry to touch in 30 minutes
primer. This primer may be top coated with a wide variety of finishes. However, finishes containing strong
solvents (Ketones, Xylene, Toluene) may cause wrinkling or lifting of Shop Primer.
Available Colors: Red, Gray
✦Product available in lower-VOC formulation.

58 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.

†For the most up-to-date MPI specifications, visit www.mpi.net.

Waterborne Primers

Clear Acrylic Sealer

A waterborne, fast-drying, clear acrylic coating formulated as an easy-to-apply seal coat
on bare concrete floors and other masonry surfaces.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications† Benjamin Moore® Corotech®
V027 Clear Acrylic Sealer Time (± 2%) –
(Sq. Ft.) (Avg.)

2 hours 11.9 275-350 0.6 < 250 VOC

Product Description Features/Benefits
• Rapid dry
V027: This product is designed to allow for easy sweep up of dust and to reduce water penetration or • Soap and water clean-up
• Can be used over a variety of substrates
erosion, efflorescence, spalling, and chalking without changing the natural appearance of the substrate. • Blister and alkali fume-resistant
Areas exposed to heavy-duty industrial traffic or severe exterior conditions may require multiple coats.
Available Colors: Clear

Acrylic Metal Primer

A water-reducible, rust-inhibitive primer for steel, iron, and non-ferrous metal.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V110 Acrylic Metal Primer Time (± 2%) –
(Sq. Ft.) (Avg.)

4 hours 40.0 160-450 2.6 < 250 VOC

Product Description Features/Benefits
• High-solids content
V110: This primer provides excellent adhesion to a range of hard-to-coat surfaces and can even be applied • Suitable for occupied areas
• Can be recoated in just 4 hours
over tightly adhering rust. Designed for light-to-moderate industrial exposures, this product can be top • Suitable for use in USDA-inspected facilities
coated with a wide variety of coatings.
Available Colors: White, Red

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 59
†For the most up-to-date MPI specifications, visit www.mpi.net.

Waterborne Primers

Water Reducible Epoxy Ester Primer

A water-thinned industrial primer with excellent wetting properties formulated for the
general metal finishing and fabrication market.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V125 Water Reducible Epoxy Ester Primer Time (± 2%) –
(Sq. Ft.) (Avg.)

4 hours 31.0 250-300 1.8 > 250 VOC

Product Description Features/Benefits
• Water-thinned industrial primer with excellent wetting properties
V125: Water Reducible Epoxy Ester Primer is a water-thinned industrial primer offering the application • Formulated with corrosion inhibiting pigments for rust protection
• Application and performance characteristics of a conventional alkyd
and performance characteristics of a conventional alkyd primer. primer without the clean-up normally associated with these products
Available Colors: Red, Gray

Waterborne Bonding Primer

A one-component bonding primer that may also be used as a rust-inhibitive universal primer.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V175 Waterborne Bonding Primer Time (± 2%) Eligible for LEED® v4 credit; Qualifies for CHPS
(Sq. Ft.) (Avg.) low emitting credit; CDPHv1 Emission certified

2 hours 37.0 300-400 1.8 < 100 VOC

Product Description Features/Benefits
• Replaces traditional wash coat primers
V175: This product bonds to various metals creating a solid foundation for finishing coats. This product • Low-VOC, soap and water clean-up
• Bonds to all metal substrates including tough to coat chrome,
may be finish coated with a wide variety of coatings including alkyds, acrylics, epoxies, urethanes, and brass, stainless, and aluminum
moisture cured urethanes. Because of its versatility on all metals, Waterborne Bonding Primer will replace • Suitable for use in USDA-inspected facilities
traditional wash coat primers and offers an easier-to-use alternative for all projects.
Available Colors: Translucent Green

60 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net.

Specialty and Flooring Primers

Polyamide Epoxy Primer

Formulated for use on ferrous and non-ferrous metals in industrial and commercial applications.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications† Benjamin Moore® Corotech®
V150✦ Polyamide Epoxy Primer Time (± 2%) –
(Sq. Ft.) (Avg.)

8 hours 62.0 350-400 2.6 > 250 VOC

Product Description Features/Benefits
• High-solids content
V150: This two-component, rust-inhibitive epoxy primer is an excellent choice for use as a rust-inhibitive • Outstanding protection against corrosion
• Engineered for use in general metal finishing and fabrication
base coat when used as part of a high-performance coating system. With proper top coating, it demonstrates • Appropriate for chemical processing facilities and transportation
excellent resistance to moisture and chemicals, including solvents, acids, and alkalis. Polyamide Epoxy Primer infrastructure finishing
is also suitable for use on concrete substrates in secondary containment and immersion service applications. • Suitable as a high-performance tie coat, especially over existing epoxies
Available Colors: Red, Gray • Suitable for use in USDA-inspected facilities
✦Product available in lower-VOC formulation.

100% Solids Epoxy Pre-Primer

Formulated for use on both steel and masonry and designed to provide an excellent foundation
for a wide range of top coats.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V155 100% Solids Epoxy Pre-Primer Time (± 2%) Eligible for LEED® v4 credit; Qualifies for CHPS
(Sq. Ft.) (Avg.) low emitting credit; CDPHv1 Emission certified

12 hours 98.0 500-1600 2.6 < 50 VOC

Product Description Features/Benefits
• Low viscosity easily fills voids and crevices
V155: This two-component epoxy is ideal for rusted steel where extensive surface preparation is needed • Does not shrink - eliminates craters
• Chemical- and fume-resistant
but not logistically possible. Its penetrating properties and extended dry time (16 hours at 77°F) means better • Extended cure time allows maximum penetration
penetration and seal of crevices and other imperfections, promoting better adhesion for subsequent coats. • Seals previously coated concrete, masonry, and galvanized metal
For prepared masonry surfaces, it provides an excellent foundation for subsequent coats of Corotech epoxy
floor coatings. The unique, 100% solids formula forms a sealed epoxy barrier that inhibits future corrosion.
Available Colors: Clear

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 61
†For the most up-to-date MPI specifications, visit www.mpi.net.

Specialty and Flooring Primers

Moisture Tolerant Quick Set Epoxy Sealer

A two-component, fast-dry, waterborne polyamide hybrid sealer for masonry floors.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V156 Moisture Tolerant Quick Set Epoxy Sealer Time (± 2%) –
(Sq. Ft.) (Avg.)

5 hours 31.0 300-350 1.5 < 250 VOC

Product Description Features/Benefits

V156: This product serves as an excellent primer or base coat for high-performance epoxy floor systems, with • Fast set; recoat in 5 hours
• Can tolerate slightly damp masonry
fast-dry performance. This product can also be used as a stand-alone clear finish on masonry floors (2 coats). • Suitable for use in USDA-inspected facilities
Available Colors: Clear • Water clean-up
• May be used as a stand-alone semi-gloss clear coat (2 coats)

Organic Zinc Rich Primer

A heavy-duty corrosion inhibitor for interior or exterior ferrous metal and weathered
galvanized metal.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V170 Organic Zinc Rich Primer Time (± 2%) MPI 18
(Sq. Ft.) (Avg.)

12-18 43.0 300-400 2 > 250 VOC
hours

Product Description Features/Benefits
• High zinc content delivers cathodic protection
V170: Organic Zinc Rich Primer is made from an organic thermoplastic resin and leaves a finished • Can be top coated or left uncoated
• Thermoplastic resin requires tie coat under certain finishes; check TDS
film that is 83% zinc. Ideal for touching up existing galvanized metal with no top coat. • Cold Galvanizing Project Qualification
Available Colors: Gray • Meets Composition Requirements of TT-P-1046
• Meets Performance Requirements of TT-P-641 & DOD-P-21035
• Meets Performance Requirements of Mil-P-26915 Type I, Class A
• Meets SSPC Paint #5 & SSPC Paint #20, Type II

62 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.

†For the most up-to-date MPI specifications, visit www.mpi.net.

Specialty and Flooring Primers

Acrylic Block Filler

A water reducible, heavy-duty, acrylic block filler formulated for interior or exterior use in
conjunction with high-performance coating systems.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications† Benjamin Moore® Corotech®
V114 Acrylic Block Filler Time (± 2%) –
(Sq. Ft.) (Avg.)

12 hours 50.0 50-100 12 < 50 VOC

Product Description Features/Benefits
• Excellent for all high-performance coatings
V114: This product may be top coated with conventional latex or alkyd finishes as well as with epoxy, • Fills and seals masonry block and concrete
• High-solids
aliphatic urethane, chlorinated rubber, and quick dry enamels. • High moisture resistance
Available Colors: White

Waterborne Epoxy Block Filler

A high-solids epoxy block filler that can be cleaned up with soap and water.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V163 Waterborne Epoxy Block Filler Time (± 2%) –
(Sq. Ft.) (Avg.)

16 hours 46.0 60-90 10.2 < 150 VOC

Product Description Features/Benefits
• Excellent filling on all masonry and cinder block
V163: This product withstands repeated cleanings with high-pressure water and can be top coated • Outstanding water resistance
• Suitable for use in USDA-inspected facilities
with most high performance coatings. • Soap and water clean-up
Available Colors: White • Resists alkalis and acids

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 63
†For the most up-to-date MPI specifications, visit www.mpi.net.

Alkyd Enamels

Alkyd Urethane Enamel

A heavy-duty alkyd enamel intended for use on a wide variety of surfaces,
both interior and exterior.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V200✦ Alkyd Urethane Enamel - Gloss Time (± 2%) MPI 1, 9, 27 & 48
V201✦ Alkyd Urethane Enamel - Semi-Gloss (Sq. Ft.) (Avg.)
–
12 hours 56.0 400-450 2.1 > 250 VOC

12 hours 59.0 400-450 2.3 > 250 VOC

Product Description Features/Benefits

V200, V201: This surface-tolerant formula sticks to surfaces that may be marginally prepared, and the • Urethane modification for maximum durability
• Easy application
exceptional flow and leveling provides a smooth, uniform finish. Made with our toughest alkyd resin, this • For use on all surfaces
paint stands up to mechanical and human abuse, while the urethane fortification adds gloss and color • Hard, scratch- and impact-resistant coating
retention in exterior spaces exposed to sunlight and rain. • High-solids formula

V200: Available Colors: White, Black, Wrought Iron Black, Aluminum, Bronzetone, Silver Gray, Battleship Gray, Safety Colors. Tint bases available for all colors.
V201: Available Colors: White, Black, Bronzetone, Silver Gray, Battleship Gray, Safety Colors. Tint bases available for all colors.

✦Product available in lower-VOC formulation.

Rapid Dry Alkyd Enamel

A high-performance, quick-dry, rust-preventive shop enamel formulated for use on
ferrous metal substrates.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V220 Rapid Dry Alkyd Enamel - High Gloss Time (± 2%) MPI 96
(Sq. Ft.) (Avg.)

2 hours 37.5 350-450 1.5 > 250 VOC

Product Description Features/Benefits
• Tack-free in 10 minutes, recoat in 2 hours (77°F, 50% RH)
V220: This enamel is excellent for use in shop application facilities in the fabrication market and also is ideal • Excellent gloss and color retention
• Spray application only; small areas may be brushed or rolled
for use in the industrial refurbishment market as an implement, dumpster, machinery or construction enamel. • Intended for shop and OEM applications only
Available Colors: White, Black, Aluminum, Safety Colors. Tint bases available for all colors. • Hard, scratch- and impact-resistant coating

64 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net.

Alkyd Enamels

High Solids Rapid Dry Enamel

Designed as a finish coat for metal where a rugged, abrasion-resistant, high-gloss finish is desired.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications† Benjamin Moore® Corotech®
V225 High Solids Rapid Dry Enamel - High Gloss Time (± 2%) MPI 48, 96
(Sq. Ft.) (Avg.)

1 hour 52.0 320-420 2.3 > 250 VOC

Product Description Features/Benefits
• Durable hard finish
V225: This product may be used in field painting applications as well as shop applications. Designed for • Dries quickly for fast production
• Spray application only; small areas may be brushed or rolled
interior or exterior use, the chain stop formulation far surpasses many high-solids enamels on the market • Rust-preventive coating
in gloss and color retention in exterior exposures.
Available Colors: White, Black, Safety Colors. Tint bases available for all colors.

Quick Dry Alkyd Enamel

A high-performance, single-component, quick-dry, rust preventive enamel formulated for
use on ferrous metal substrates.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V230✦ Quick Dry Alkyd Enamel - Gloss Time (± 2%) MPI 96
V231✦ Quick Dry Alkyd Enamel - Semi-Gloss (Sq. Ft.) (Avg.) MPI 81

2 hours 51.0 350-450 2.1 > 250 VOC

2 hours 52.0 350-450 2.1 > 250 VOC

Product Description Features/Benefits

V230, V231: This product provides corrosion resistance for both interior and exterior steel surfaces. • Tack-free dry in just 15 minutes
• Airless or HVLP systems
Not recommended for non-ferrous metals such as galvanized or aluminum unless properly primed, it may • Hard, scratch- and impact-resistant coating
be applied to new or properly prepared, rusted surfaces. • For all ferrous metal surfaces
• Suitable for use in USDA-inspected facilities

V230: Available Colors: White, Black, Light Gray, Battleship Gray, Safety Colors. Tint bases available for all colors.
V231: Available Colors: White, Black, Light Gray, Battleship Gray, Bronzetone.

✦Product available in lower-VOC formulation.

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 65
†For the most up-to-date MPI specifications, visit www.mpi.net.

Alkyd Enamels

Electrostatic Alkyd Enamel

A quick-dry, rust-preventive paint that is applied only via electrostatic spray,
with no need to adjust polarity.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V260✦ Electrostatic Alkyd Enamel - Semi-Gloss Time (± 2%) –
(Sq. Ft.) (Avg.)

1 hour 46.0 350-450 1.9 > 250 VOC

Product Description Features/Benefits
• For metal only
V260: This high-performance formula is engineered for use on ferrous and non-ferrous metal in OEM • Pre-built and optimized solvent polarity requires no on-site adjustments
to produce effective electrostatic wrap during application
and industrial refurbishing. It is also well suited for application to metal surfaces, such as furniture, lockers, • Durable hard finish
machinery, tools, doors, and pipes. • Resists marring and scratching and delivers a lasting finish
Available Colors: Tintable White. Tint bases available for all colors.
✦Product available in lower-VOC formulation.

Silicone Alkyd High Heat Coating

Formulated specifically for industrial use to exhibit excellent weathering and
resist mild industrial chemicals and moisture.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V264 Silicone Alkyd High Heat Coating Time (± 2%) MPI 2
(Sq. Ft.) (Avg.)

4 hours 43.0 350-400 1.9 > 250 VOC

Product Description Features/Benefits
• Can be recoated in just 4 hours
V264: Silicone Alkyd High Heat is designed to protect steel that is exposed to heat ranges up to • High-heat resistance allows for use on industrial machinery,
hot metal ducting, and exhaust vents
800°F (425°C). • Uses include heat stacks, boiler jackets, heat exchangers, drying kilns,
Available Colors: Aluminum and incinerators
• Not for interior residential use

66 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.

†For the most up-to-date MPI specifications, visit www.mpi.net.

Waterborne Enamels

Water Reducible Alkyd Enamel

Designed for use in the general metal-finishing and fabrication markets requiring water-thinned
products with the performance attributes of conventional alkyds.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications† Benjamin Moore® Corotech®
V210 Water Reducible Alkyd Enamel - Gloss Time (± 2%) –
(Sq. Ft.) (Avg.)

2 hours 29.0 350-450 1.2 > 250 VOC

Product Description Features/Benefits
• Ease of application
V210: Water Reducible Alkyd Enamel is a water-thinned industrial enamel offering the application and • Exceptional flow allows for an aesthetically pleasing finish
• Excellent protective qualities when used in interior or exterior applications
performance characteristics of a conventional alkyd enamel.
Available Colors: Tintable White, Black. Tint bases available for all colors.

Quick Dry Acrylic Spray DTM

An extremely durable, UV-resistant, modified-acrylic enamel that provides superior adhesion
and maximum durability.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V300 Quick Dry Acrylic Spray DTM - Gloss Time (± 2%) MPI 114
(Sq. Ft.) (Avg.)

2 hours 40.0 300-400 1.9 < 100 VOC

Product Description Features/Benefits
• Ideal solution for factory jobs requiring minimal dry-to-handle time
V300: Formulated for interior or exterior use on a variety of surfaces, including ferrous and non-ferrous • For wood, metal, and masonry surfaces
• Hard, scratch- and impact-resistant coating
metal, concrete, masonry, wood, and drywall. Quick-Dry Acrylic Spray DTM can also be used in dry fall • Recommended for machinery, tanks, factory equipment, and more
applications. Spray application preferred. • Meets requirements for SSPC Paint Specification #24
Available Colors: White, Black, Bronzetone, Silver Gray, Battleship Gray, Safety Colors,
Clear, Wrought Iron Black (flat). Tint bases available for all colors.

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 67
†For the most up-to-date MPI specifications, visit www.mpi.net.

Waterborne Enamels

Acrylic DTM Enamel

A tough waterborne acrylic enamel that fights rust on metal and provides a smooth,
durable finish on wood, drywall, and masonry substrates.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V330 Acrylic DTM Enamel - Gloss Time (± 2%) MPI 154
V331 Acrylic DTM Enamel - Semi-Gloss (Sq. Ft.) (Avg.) MPI 153

5 hours 40.0 300-350 2 < 250 VOC

4 hours 42.0 300-350 2.1 < 250 VOC

Product Description Features/Benefits
• For light-to-moderate industrial, commercial, and select residential use
V330, V331: Good for both interior and exterior applications, a special inhibitor in the formula prevents • Excellent for metal, as well as wood, masonry, drywall, and other surfaces
• Resists flash rust on metal
flash rust when applied to ferrous metal, and the smooth dry film is UV- and moisture-resistant. • Excellent for all corrugated metal sheeting
Available Colors: White, Black, Bronzetone, Safety Colors. Tint bases available for all colors. • Can be used on galvanized metal and aluminum

Pre-Catalyzed Waterborne Epoxy

A unique product that provides epoxy toughness in a ready-to-use waterborne formula
for walls, ceilings, and trim.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
Time (± 2%)
(Sq. Ft.) (Avg.)

V341 Pre-Catalyzed Waterborne Epoxy - 2 hours 41.5 350-450 1.7 < 100 VOC Eligible for LEED® v4 credit; Qualifies for CHPS
Semi-Gloss low emitting credit; CDPHv1 Emission certified

V342 Pre-Catalyzed Waterborne Epoxy - Eggshell 2 hours 38.0 350-400 1.6 < 100 VOC MPI 151; Eligible for LEED® v4 credit;
Qualifies for CHPS low emitting credit;

CDPHv1 Emission certified

Product Description Features/Benefits
• Single pack - no catalyst
V341, V342: The cured film is scrubbable, resists water and common cleaning chemicals, and stands up • Tints to all colors
• Excellent for retail, commercial, healthcare, schools, and more
to abrasion and marring. Excellent adhesion to many surfaces, including existing paint, drywall, primed • Water clean-up
masonry, and primed metal.
Available Colors: White. Tint bases available for all colors.

68 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.

†For the most up-to-date MPI specifications, visit www.mpi.net.

Epoxies

Coal Tar Epoxy

A high-solids, two-component tar-filled coating formulated to provide excellent film build
in one or two coats.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications† Benjamin Moore® Corotech®
V157 Coal Tar Epoxy - Flat Time (± 2%) MPI 35
(Sq. Ft.) (Avg.)

12 hours 70.0 70-135 12.2 < 250 VOC

Product Description Features/Benefits

V157: The high level of cross-linking of Coal Tar Epoxy provides an excellent barrier coat for immersion service • Formulated for use over properly prepared/primed steel, iron, concrete,
and non-ferrous metal
in fresh water, salt water or waste water. Additionally, this product is resistant to many acids, alkalis, and mild • Provides excellent protection from water, acids, alkalis, and mild solvents
solvents in splash and spill exposures. • Suitable for use in USDA-inspected facilities
Available Colors: Black • Meets Performance Requirements for Army Corps of Engineers C-200
• Meets Performance Requirements for SSPC Paint 16
• Meets Performance Requirements for DOD-P-23236

Epoxy Mastic Coating

A high-solids, rust-inhibitive, surface-tolerant epoxy mastic for professional use in industrial
and commercial applications.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V160 Epoxy Mastic Coating - Semi-Gloss Time (± 2%) MPI 101, 116
(Sq. Ft.) (Avg.)

12 hours 79.0 175-275 5.9 < 250 VOC

Product Description Features/Benefits
• High solids (79%) and high build - excellent for corners, crevices and welds
V160: Ideal for protection of steel and concrete (floor rated). Excellent for use on ferrous and non-ferrous • Surface-tolerant mastic for marginal substrates
• Hard, scratch- and impact-resistant coating
metals, and when properly top coated, exhibits excellent chemical and moisture resistance. Resists solvents, • Excellent for secondary containment
dilute acids and alkali attack. • Suitable for use in USDA-inspected facilities
Available Colors: Tint bases available for all colors.

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 69
†For the most up-to-date MPI specifications, visit www.mpi.net.

Epoxies

Polyamide Epoxy Coating

A multi-use epoxy designed for tanks, machinery, floors, structural members, walls, boats, and
other industrial and commercial substrates requiring a durable coating in severe environments.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V400 GL✦ Polyamide Epoxy Coating - Gloss Time (± 2%) MPI 82
V400 HB✦ Polyamide Epoxy Coating - High Build (Sq. Ft.) (Avg.) MPI 82, 98
V400 SG✦ Polyamide Epoxy Coating - Semi-Gloss
10-12 62.0 400-500 2.3 > 250 VOC MPI 82, 177, 108
hours

10-12 66.0 200-250 4.8 > 250 VOC
hours

10-12 62.0 400-500 2.3 > 250 VOC
hours

Product Description Features/Benefits
• Highly cross-linked film for toughness and durability
V400 GL, V400 HB, V400 SG: Floors: moderate- to heavy-duty performance in commercial/ • Resists many chemicals and solvents
• Suitable for immersion
industrial environments exposed to heavy foot traffic and occasional traffic of lightweight rubber-tired • Suitable for use in USDA-inspected facilities
vehicles, intermittent spillage of mild to heavier chemicals, occasional steam and chemical cleaning.
Metal: excellent for use on ferrous metals, non-ferrous metals, and galvanized metal. Catalyst determines
gloss level.
Available Colors: Tintable White, Black, Silver Gray, Battleship Gray, Safety Colors, Clear. Tint bases
available for all colors.
✦Product available in lower-VOC formulation.

Fast Dry Polyamide Epoxy

A unique satin sheen epoxy that is return to service in 24 hours at 77°F.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V410 Fast Dry Polyamide Epoxy - Satin Time (± 2%) –
(Sq. Ft.) (Avg.)

8 hours 76.0 350-500 2.8 < 250 VOC

Product Description Features/Benefits
• Fast cure time, low-temp application
V410: This product cures in temperatures as low as 35°F in approximately 5 days. May also be used as a • Excellent for all metal and masonry surfaces
• Excellent acid and chemical resistance
highly durable floor finish and is suitable for a variety of other substrates. • Hard, scratch- and impact-resistant coating
Available Colors: Tintable White, Black, Silver Gray, Battleship Gray, Clear. Tint bases available for all colors. • Suitable for use in USDA-inspected facilities

70 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.

†For the most up-to-date MPI specifications, visit www.mpi.net.

Epoxies

100% Solids Epoxy Floor Coating

This two-component epoxy is designed for use on bare or previously coated concrete
for interior floor applications.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications† Benjamin Moore® Corotech®
V430 100% Solids Epoxy Floor Coating - Gloss Time (± 2%) Eligible for LEED® v4 credit; Qualifies for CHPS
(Sq. Ft.) (Avg.) low emitting credit; CDPHv1 Emission certified

24 hours 98.0 100-150 12.5 < 50 VOC

Product Description Features/Benefits
• Self-leveling, high-build 100% solids formula
V430: Heavy-duty protection from a 100% solids epoxy for demanding industrial/commercial environments • Tenacious adhesion to concrete
• Outstanding durability
exposed to heavy vehicular and pedestrian traffic, constant moisture, intermittent strong chemical spills, and • Suitable for use in USDA-inspected facilities
frequent cleaning with chemicals, steam, and power washers. Provides smooth glossy finish.
Available Colors: White, Silver Gray, Battleship Gray, Terra Cotta, Sandstone, and Clear.

Waterborne Amine Epoxy

Formulated to provide good chemical, abrasion and impact resistance on a variety of commercial
and industrial surfaces, including steel, iron, concrete, non-ferrous metals, wood, and drywall.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V440 Waterborne Amine Epoxy - Gloss Time (± 2%) Eligible for LEED® v4 credit; Qualifies for CHPS
(Sq. Ft.) (Avg.) low emitting credit; CDPHv1 Emission certified

8 hours 43.0 375-475 1.7 < 250 VOC

Product Description Features/Benefits
• Water clean-up, fast dry
V440: Particularly suited for use on concrete floors. This product can be applied to many existing generic • Easy application with excellent adhesion
• Very good resistance to water and chemicals
coating types with less risk of lifting or wrinkling. When used on floors, this product provides moderate- • Excellent for use on basement floors
to heavy-duty protection in commercial environments exposed to frequent foot traffic and occasional traffic • Suitable for use in USDA-inspected facilities
of lightweight rubber-tired vehicles, intermittent spillage of mild chemicals, occasional steam cleaning, and
powerwashing.
Available Colors: White, Silver Gray, Battleship Gray, Terra Cotta, Sandstone, and Clear.
Tint bases available for all colors.

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 71
†For the most up-to-date MPI specifications, visit www.mpi.net.

Epoxies

Waterborne Acrylic Epoxy

A two-component epoxy that offers unique features such as application over
slightly damp surfaces.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V450 GL Waterborne Acrylic Epoxy - Gloss Time (± 2%) Eligible for LEED® v4 credit; Qualifies for CHPS
V450 SG Waterborne Acrylic Epoxy - Semi-Gloss (Sq. Ft.) (Avg.) low emitting credit; CDPHv1 Emission certified
Eligible for LEED® v4 credit; Qualifies for CHPS
4 hours 32.0 400-500 1.2 < 250 VOC low emitting credit; CDPHv1 Emission certified

4 hours 32.0 400-500 1.2 < 250 VOC

Product Description Features/Benefits
• Waterborne acrylic epoxy
V450 GL, V450 SG: For use on properly prepared interior and exterior ferrous metal, galvanized metal, • Durability of a traditional epoxy with water clean-up
• Minimal surface prep
wood, plaster, masonry, and drywall surfaces that are subject to moderate abrasion or mild chemical • Scrubbable, abrasion-resistant coating
exposures. Not recommended as a heavy-duty floor finish. • Easy application and clean-up
Available Colors: White, Silver Gray, Battleship Gray, Terra Cotta, Sandstone, Clear. Tint bases available
for all colors.

72 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.

†For the most up-to-date MPI specifications, visit www.mpi.net.

Urethanes

Aliphatic Acrylic Urethane

A multi-use, two-component urethane appropriate for use on both metal and masonry.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications† Benjamin Moore® Corotech®
V500 Aliphatic Acrylic Urethane - Gloss Time (± 2%) MPI 72, 78, 83, 105, 205
V510 Aliphatic Acrylic Urethane - Semi-Gloss (Sq. Ft.) (Avg.)
MPI 83, 174
8 hours 72.0 350-500 2.8 > 250 VOC

8 hours 61.0 350-500 2.4 > 250 VOC

Product Description Features/Benefits
• Resistant to hydraulic fluid
V500, V510: This product provides excellent gloss and color retention when used on exterior surfaces • Outstanding UV protection
• High chemical and abrasion resistance
exposed to sunlight and rain, and the highly cross-linked formula provides superior abrasion, chemical, • Suitable for use in USDA-inspected facilities
and solvent resistance. Due to these outstanding features, urethanes are often used as the final layer in • Meets performance specs of MIL-C-85285
a multi-layer system on steel or masonry. • Excellent anti-graffiti coating
Available Colors: White, Black, Clear

Aliphatic Urethane Coating

A high-performance, two-component aliphatic acrylic polyurethane designed for shop/OEM use.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V515 Aliphatic Urethane Coating - High Gloss Time (± 2%) MPI 83, 105, 205
(Sq. Ft.) (Avg.)

4 hours 55.0 450-550 1.8 > 250 VOC

Product Description Features/Benefits
• Durable film offers excellent gloss and color retention on exterior substrates
V515: This product can also be used as a non-sacrificial anti-graffiti coating. • Excellent abrasion, chemical, and solvent resistance in industrial
applications
Available Colors: Tintable White, Black, Clear. Tint bases available for all colors. • Balance of performance and price in a lower solids urethane
• Good salt fog resistance
• Shop/OEM use only; not OTC-compliant

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 73
†For the most up-to-date MPI specifications, visit www.mpi.net.

Urethanes

Polyester Urethane

A multi-use, two-component urethane appropriate for use on both metal and masonry.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V520 Polyester Urethane - Gloss Time (± 2%) –
(Sq. Ft.) (Avg.)

8 hours 61.0 400-450 2.3 > 250 VOC

Product Description Features/Benefits
• Resistant to discoloration from tires
V520: This urethane may be used anywhere a performance urethane is necessary for interior or exterior • Outstanding UV protection
• Fast dry - 4 hours to touch
applications. Excellent flow and leveling. It is ideal as a floor finish for commercial and industrial applications • High chemical and abrasion resistance
as well as airplane hangars. • Suitable for use in USDA-inspected facilities
Available Colors: Tintable White. Tint bases available for all colors. • Meets performance specs of MIL-C-85285

74 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.

†For the most up-to-date MPI specifications, visit www.mpi.net.

Urethanes

Quick-Cure System Polyurea Basecoat

A quick-dry, 100% solids, low-VOC, two-component, polyurea primer/base coat
for demanding industrial and commercial floors that require fast turnaround time.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications† Benjamin Moore® Corotech®
Time (± 2%) –
(Sq. Ft.) (Avg.)

V530 Quick-Cure System Polyurea Basecoat - Flat 2-8 99.2 225-325 6 < 50 VOC
hours

Product Description Features/Benefits
• Fast dry
V530: With tenacious adhesion to concrete, V530 is the ideal primer/base coat of Quick-Cure System, • Self-leveling, high-build 100% solids formula
• Tenacious adhesion to concrete
which includes V531 Polyaspartic Topcoat. • Easy application
Available Colors: QC Tan, QC Gray • Low-VOC
• Outstanding durability

Quick-Cure System Polyaspartic Topcoat

A fast-cure, high-solids, two-component, polyaspartic resin floor coating designed
as a top coat of the Quick-Cure System.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
Time (± 2%) –
(Sq. Ft.) (Avg.)

V531 Quick-Cure System Polyaspartic Topcoat - 1-2 83.0 160-275 8 < 100 VOC
Gloss hours

Product Description Features/Benefits
• Fast return to service - next day turnaround
V531: With fast, 24-hour full return to service, this product can be used on interior/exterior floor surfaces. • Self-leveling, high-build, high-solids formula
• Superior resistance to abrasions, chemicals, and solvents
And the highly cross-linked formula provides superior abrasion, chemical, and solvent resistance. • High-solids (85%) formula
V531 Polyaspartic Topcoat is recommended to be used with V530 Polyurea Basecoat as a complete • Easy application
quick-cure floor coating system.
Available Colors: Clear

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 75
†For the most up-to-date MPI specifications, visit www.mpi.net.

Urethanes

Waterborne Urethane

An extremely durable, chemical-resistant surface with the benefits of soap and water clean-up.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V540 Waterborne Urethane - Gloss Time (± 2%) MPI 105, 205, 256; Qualifies for LEED® 2009;
(Sq. Ft.) (Avg.) Eligible for LEED® v4 credit; Health Product
Declaration available; Qualifies for CHPS low
3 hours 47.0 350-500 1.8 < 50 VOC emitting credit; CDPHv1 Emission certified

Product Description Features/Benefits
• Outstanding UV protection
V540: Provides outstanding gloss retention and resists scratches and abrasion. • Low-VOC
• Quick return to service time for minimum down time
Available Colors: White, Clear • Excellent for floor applications
• Suitable for use in USDA-inspected facilities
• Meets performance specs of MIL-C-85285

Aromatic Moisture-Cured Urethane

A one-component, high-solids, moisture-cured urethane intended for use on floors
exposed to moderate-to-extreme conditions.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V580 Aromatic Moisture-Cured Urethane - Gloss Time (± 2%) MPI 31
(Sq. Ft.) (Avg.)

16 hours 56.0 300-400 2.6 > 250 VOC

Product Description Features/Benefits
• 2 hours dry to touch
V580: Aromatic Moisture-Cured Urethane provides excellent abrasion, impact resistance and chemical • Uses moisture in the air to produce a hard cross-linked film
• Quick return to light traffic (8 to 12 hours depending on humidity)
resistance. Exposure to sunlight will cause yellowing. • Suitable for use in USDA-inspected facilities
Available Colors: Clear

76 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.

†For the most up-to-date MPI specifications, visit www.mpi.net.

Specialty Products

Epoxy Patch Kit

An epoxy for repairing and patching interior concrete floors.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications† Benjamin Moore® Corotech®
V165 Epoxy Patch Kit Time (± 2%) –
(Sq. Ft.) (Avg.)

8 hours 98.0 – – < 50 VOC

Product Description Features/Benefits
• 3-part system allows on-site mixing to the exact consistency needed
V165: A 100% solids epoxy co-polymer matrix for repairing and patching interior concrete floors. • High Solids with no shrinkage
• For any high-traffic floor
It sets rapidly with extremely high initial strength and is ready for foot traffic in 5-8 hours. • Non-flammable
This easy-to-use 3-part system includes liquid part A, liquid catalyst, and aggregate. • Trowels easily
Available Colors: Concrete Gray

Rust Arrestor

Primer that chemically transforms rust and halts the corrosion process while enabling
the surface to accept a top coat.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V180 Rust Arrestor Time (± 2%) –
(Sq. Ft.) (Avg.)

4-6 23.0 300-400 1.1 < 100 VOC
hours

Product Description Features/Benefits
• Chemically converts rust to inhibit corrosion
V180: A water-based, film-forming primer that chemically transforms rust, halting the corrosion • Forms a tight chemical bond to rusted surfaces
• Penetrates into tight areas
process and enabling the surface to accept a top coat. When applied over tightly adhering rust, • Suitable for use in USDA-inspected facilities
it forms a black, protective film. • Can be top coated with latex, alkyd, urethane, or epoxy finishes
Available Colors: N/A

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 77
†For the most up-to-date MPI specifications, visit www.mpi.net.

Specialty Products

Anti-Slip Aggregate

Anti-slip aggregate designed to elevate the foot or wheel on damp or wet surfaces.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V630 Anti-Slip Aggregate Time (± 2%) –
(Sq. Ft.) (Avg.)

–– –– –

Product Description Features/Benefits
• Compatible with all floor coatings
V630: This specially formulated anti-slip aggregate is designed to elevate the foot or wheel on a damp • Particle Size #16

or wet surface, permitting the water to escape instead of causing the foot or wheel to hydroplane.
Available Colors: N/A

Alkyd Gloss And Hardness Catalyst

Designed to speed up drying while producing a higher gloss and more corrosion resistance.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V705 Alkyd Gloss And Hardness Catalyst Time (± 2%) –
(Sq. Ft.) (Avg.)

– 69.1 – – > 250 VOC

Product Description Features/Benefits
• Speeds drying
V705: Alkyd Gloss and Hardness Catalyst speeds drying while producing a higher gloss and more corrosion • Produces higher gloss
• Increases corrosion, solvent, and chemical resistance
resistance, as well as a harder enamel finish. Other benefits include increased solvent and chemical resistance.
Can be used with the following Corotech® Alkyds: V200 Line, V201 Line, V220 Line, V230 Line, or V231 Line.
Available Colors: N/A

78 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.

†For the most up-to-date MPI specifications, visit www.mpi.net.

Cleaning, Prep & Solvent Products

Cleaning & Prep Products

A collection of products to help clean and prepare multiple surfaces for coating. Products
are easy to use and concentrated for on-site mixing according to surface conditions.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications† Benjamin Moore® Corotech®
V600 Oil & Grease Emulsifier Time (± 2%) –
V610 Citrus Cleaner (Sq. Ft.) (Avg.) –
V620 Concrete & Masonry Etcher –
– – 100 – < 250 VOC

– – 100 – > 250 VOC

– – 100 – –

Product Description Features/Benefits
• Concentrated and must be mixed with water
V600: This product is designed for cleaning walls, floors, and equipment. It is extremely effective in • Biodegradable and phosphate-free
• Use on metal, fiberglass, vinyl, and masonry surfaces
removing oil, grease, fats, blood, and animal by-products. It may also be used for cleaning concrete, asphalt, • Rinses clean with no residue
vinyl, metal, plastic, fiberglass, etc. It is also very effective for cleaning equipment, tools, brushes, rollers,
and spray equipment. • Concentrated for maximum strength
Available Colors: N/A • Excellent cleaner for a wide variety of surfaces
• Biodegradable and phosphate-free
V610: An industrial-strength, biodegradable, phosphate-free, emulsifying cleaner based on a natural citrus • Milder and less corrosive to cleaned surfaces
• Concentrated for maximum strength
by-product. Cleans metals, masonry, painted surfaces, glass, upholstery, carpets, tile, plastics, and more. • Inhibitors protect metal surfaces from corrosion
Available Colors: N/A • May be used to remove rust and scale from steel

V620: Concrete & Masonry Etcher is used for removing laitance and etching concrete. This pre-treatment

includes surfactants that provide better penetration for removing foreign materials and contaminates. It also
contains extenders that give a more even etch over larger areas.
Available Colors: N/A

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 79
†For the most up-to-date MPI specifications, visit www.mpi.net.

Cleaning, Prep & Solvent Products

Solvents

A collection of solvents used to help clean and prepare surfaces.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
V700 Urethane Reducer Time (± 2%) –
V701 Brushing Reducer (Sq. Ft.) (Avg.) –
V703 Xylene –
V704 Epoxy Thinner – – – – > 250 VOC –

– – – – > 250 VOC

– – – – > 250 VOC

– – – – > 250 VOC

Product Description Features/Benefits
• For use with all two-part solvent-based urethane coatings
V700: Urethane Reducer is 100% butyl acetate for use in thinning catalyzed acrylic urethanes. Effective for • Effectively cleans tools and equipment
• May be used to reduce and thin coatings up to the legal limits
cleaning equipment immediately after use as well. Do not use this product for cleaning synthetic brushes or allowed by district
rollers, as it will dissolve them. • For use with all alkyd and oil-modified polyurethane coatings
Available Colors: N/A • Effectively cleans tools and equipment
• May be used to reduce and thin coatings up to the legal limits
V701: Brushing Reducer is a blend of high flash naphtha and mineral spirits. Use this solvent to improve allowed by district
• Modifies evaporation rates
the brushing characteristics of single-component, solvent-based coatings. • Improves drying
Available Colors: N/A • Effectively cleans tools and equipment

V703: Xylene is an aromatic solvent that can be used in numerous industrial coatings systems as a general • Reduces catalyzed epoxy primers and finishes

thinner and clean-up solvent. Use to modify evaporation rates and improve drying. For effective cleaning of
tools and equipment.
Available Colors: N/A

V704: Epoxy Thinner is a carefully balanced combination of the proper solvents for reducing catalyzed

epoxy primers and finish coats.
Available Colors: N/A

80 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net.

CORONADO®

Primers

Coronado® Grip & Seal Latex Stain Blocking Primer

A 100% acrylic latex primer sealer formulated to block stains and provide an excellent
foundation for latex and oil-based paints.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
Time (± 2%) MPI 50; Qualifies for LEED® 2009
(Sq. Ft.) (Avg.)

116 Coronado® Grip & Seal Latex Stain Blocking 1-2 40.5 300-400 1.9 < 50 VOC
Primer hours

Product Description Features/Benefits
• Superior adhesion
116: Grip & Seal Latex Stain Blocking Primer blocks stains from water, fingerprints, smoke, and crayon. It is • Mildew resistant coating
• Seals common stains
formulated from a 100% acrylic resin and provides an excellent foundation for both latex and oil-based paints. • Adheres to glossy surfaces
Available Colors: White • Interior/exterior use
• Creates a durable foundation

Super Kote 5000® Acrylic Latex Primer

Fast-dry primer sealer for interior drywall and plaster designed for fast turnaround
by professional painters.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
40 Super Kote 5000® Acrylic Latex Primer Time (± 2%) MPI 50; Eligible for LEED® v4 credit;
(Sq. Ft.) (Avg.) Qualifies for CHPS low emitting credit;

4 hours 31.9 350-450 1.3 < 50 VOC CDPHv1 Emission Certified

Product Description Features/Benefits
• Excellent holdout
40: Super Kote 5000® Primer is a vinyl-acrylic primer and sealer for interior drywall and plaster. • Quick-drying
• Easy application
It is quick-drying and easy-to-apply. This primer demonstrates excellent holdout, providing a • For use under latex or oil-based finishes
strong foundation for latex or oil-based finishes.
Available Colors: White

82 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.

†For the most up-to-date MPI specifications, visit www.mpi.net

Primers

Super Kote® 3000 Acrylic Latex Primer

An easy-to-apply primer optimized for high-productivity jobs.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
948 Super Kote® 3000 Acrylic Latex Primer Time (± 2%) Qualifies for LEED® 2009
(Sq. Ft.) (Avg.)

4 hours 32.0 300-450 1.3 < 50 VOC

Product Description Features/Benefits

948: Super Kote® 3000 Primer is an easy-to-apply primer optimized for high-productivity jobs. It is ideal • Good hide
• Spatter-resistant
for use in rental properties. This high-hiding, fast-drying primer provides a strong foundation for interior • Low-VOC
drywall and cured plaster, and can be top coated with latex or oil-based paint. • Quick-drying
Available Colors: White

Super Kote® 1000 Latex Primer Coronado®

An economical and fast-drying latex primer sealer.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
88-11 Super Kote® 1000 Latex Primer Time (± 2%) Qualifies for LEED® 2009
(Sq. Ft.) (Avg.)

4 hours 29.4 300-400 1.1 < 50 VOC

Product Description Features/Benefits

88-11: A fast-drying latex primer sealer for interior drywall and thoroughly cured plaster. • Easy-to-apply
• Top coat in 4 hours
Available Colors: White

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 83
†For the most up-to-date MPI specifications, visit www.mpi.net

Interior Paint

Coronado Grand® Acrylic Paint & Primer

An easy-to-apply acrylic paint and primer designed to provide superior washability,
durability, and coverage.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
Time (± 2%) Qualifies for LEED® 2009
(Sq. Ft.) (Avg.) MPI 44; Qualifies for LEED® 2009
MPI 54; Qualifies for LEED® 2009
701 Coronado Grand® Acrylic Paint & Primer - 1-2 38.6 400-450 1.5 < 50 VOC
Matte hours

702 Coronado Grand® Acrylic Paint & Primer - 1-2 34.8 400-450 1.4 < 50 VOC
Eggshell hours

704 Coronado Grand® Acrylic Paint & Primer - 1-2 36.0 400-450 1.4 < 50 VOC
Semi-Gloss hours

Product Description Features/Benefits
• Dries to a smooth finish
701, 702, 704: Coronado Grand® is an acrylic paint and primer designed to provide superior • Withstands frequent cleanings
• Superior durability
washability, durability, and coverage. Easy-to-apply with great flow and leveling for a beautiful finish. • Easy application
Available Colors: White. Tint bases available for all colors. • Low-VOC

84 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.

†For the most up-to-date MPI specifications, visit www.mpi.net

Interior Paint

Tough Walls Acrylic Paint & Primer

A line of interior waterborne acrylic paint & primer that provides easy application with
excellent hide, washability, and stain resistance.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
Time (± 2%) Qualifies for LEED® 2009
(Sq. Ft.) (Avg.) Qualifies for LEED® 2009
Qualifies for LEED® 2009
16 Tough Walls Acrylic Paint & Primer - 4 hours 36.4 300-400 1.7 < 50 VOC Qualifies for LEED® 2009
Ultra-Flat Qualifies for LEED® 2009

24 Tough Walls Acrylic Paint & Primer - Flat 4 hours 34.8 350-450 1.5 < 50 VOC

C34 Tough Walls Acrylic Paint & Primer - Eggshell 4 hours 37.6 350-450 1.5 < 50 VOC

C60 Tough Walls Acrylic Paint & Primer - Satin 4 hours 33.6 400 1.3 < 50 VOC
4 hours 33.2 350-450 1.3 < 50 VOC
C22 Tough Walls Acrylic Paint & Primer -
Semi-Gloss

Product Description Features/Benefits Coronado®
• Exceptional stain resistance
16, 24: Tough Walls is engineered to deliver exceptional stain resistance and washability. The ideal choice for • Durable, washable finish
• Excellent hide
high-traffic areas, it dries to a smooth, long-lasting finish. This paint is easy-to-apply and quick-drying, and it • Easy application
provides excellent hide. • Low-VOC

16: Available Colors: White, Pastel Base, Tint Base. • Exceptional stain resistance
24: Available Colors: White. Tint bases available for all colors. • Durable, washable finish
• Excellent hide
C34, C60, C22: Tough Walls is engineered to deliver exceptional stain resistance and washability. • Easy application
• Scrubbable
The ideal choice for high-traffic areas, it dries to a smooth, long-lasting finish. This paint is easy-to-apply
and quick-drying, and it provides excellent hide.

Available Colors: White. Tint bases available for all colors.

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 85
†For the most up-to-date MPI specifications, visit www.mpi.net

Interior Paint

Tough Walls Alkyd Enamel

Interior solvent-thinned alkyd trim paint that forms a durable, hard finish ideal for kitchens,
trim, bathrooms, and other high-traffic areas.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
23 Tough Walls Alkyd Enamel - Semi-Gloss Time (± 2%) –
(Sq. Ft.) (Avg.)

8 hours 50.5 350-450 2.1 > 250 VOC

Product Description Features/Benefits
• Hard, durable finish
23: Tough Walls Alkyd Semi-Gloss Enamel forms a hard, durable finish that is ideal for trim, kitchens, • Ideal for high-traffic areas
• Highly scrubbable
bathrooms, and other high-traffic areas that require frequent washing. • Suitable for trim, kitchens, and bathrooms
Available Colors: White, Pastel Base.

86 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.

†For the most up-to-date MPI specifications, visit www.mpi.net

Interior Paint

Super Kote 5000® Zero*

High-quality, interior commercial paint with easy application and seamless touch-up,
designed to meet stringent VOC standards.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
501 Super Kote 5000® Zero - Flat Time
502 Super Kote 5000® Zero - Eggshell 2-3 (± 2%) (Sq. Ft.) (Avg.) MPI 53, 53 X-Green™; Eligible for LEED® v4 credit;
503 Super Kote 5000® Zero - Satin hours Qualifies for CHPS low emitting credit;
504 Super Kote 5000® Zero - Semi-Gloss 2-3 39.7 400-450 1.5 0 VOC CDPHv1 Emission certified
hours 34.4
4 hours 33.0 400-450 1.3 0 VOC MPI 44, 44 X-Green™; Eligible for LEED® v4 credit;
32.8 Qualifies for CHPS low emitting credit;
4 hours 400-450 1.3 0 VOC CDPHv1 Emission certified

400-450 1.2 0 VOC MPI 43, 43 X-Green™; Eligible for LEED® v4 credit;
Qualifies for CHPS low emitting credit;
CDPHv1 Emission certified

MPI 54, 54 X-Green™; Eligible for LEED® v4 credit;
Qualifies for CHPS low emitting credit;
CDPHv1 Emission certified

Product Description Features/Benefits Coronado®
• VOC-compliant in all regulated areas
501, 502, 503, 504: Super Kote 5000® Zero is designed to meet the most stringent VOC regulations, • High-quality, durable finish
• Easy application
while still facilitating a smooth, fast production process. • Seamless touch-up
Available Colors: White. Tint bases available for all colors. *Zero-VOC when tinted with Benjamin Moore® • Excellent hide
Color Preview® zero-VOC colorants. Colorants other than Benjamin Moore® Color Preview® added to this base
paint may increase VOC level significantly depending on color choice.

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 87
†For the most up-to-date MPI specifications, visit www.mpi.net

Interior Paint

Super Kote 5000® Interior Paint

Premium commercial paint with low spatter and easy application, designed to
allow professional painters to move quickly.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
Time (± 2%) MPI 53; Qualifies for LEED® 2009
(Sq. Ft.) (Avg.) MPI 44; Qualifies for LEED® 2009
MPI 44; Qualifies for LEED® 2009
28 Super Kote 5000® Interior Paint - Flat 4 hours 32.1 300-400 1.5 < 50 VOC MPI 43; Qualifies for LEED® 2009

1130 Super Kote 5000® Interior Paint - 4 hours 31.9 300-400 1.5 < 100 VOC Qualifies for LEED® 2009
Low-Sheen Eggshell

30 Super Kote 5000® Interior Paint - Eggshell 4 hours 32.0 300-400 1.5 < 50 VOC

1160 Super Kote 5000® Interior Paint - Satin 4 hours 33.0 350-450 1.4 < 100 VOC

32 Super Kote 5000® Interior Paint - Semi-Gloss 4 hours 32.4 300-400 1.5 < 50 VOC

Product Description Features/Benefits

28, 1130, 30, 1160, 32: Super Kote 5000® is designed for commercial projects—when getting the job • Quick-drying
• High hide
done quickly is a priority. With low spatter and easy application, this premium-quality, vinyl-acrylic formula • Low spatter
delivers dependable performance and productivity. • Smooth leveling
• Easy application
28: Available Colors: White, Black, Brite White. Tint bases available for all colors.
1130, 30, 1160, 32: Available Colors: White. Tint bases available for all colors.

88 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.

†For the most up-to-date MPI specifications, visit www.mpi.net

Interior Paint

Super Kote 5000® Waterborne Acrylic-Alkyd

The desired flow and leveling characteristics of conventional alkyd paints in a tough satin or
semi-gloss finish that stands up to repeated washing and cleans up easily with soap and water.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
Time (± 2%) Qualifies for LEED® 2009
(Sq. Ft.) (Avg.) Qualifies for LEED® 2009

203 Super Kote 5000® Waterborne 4 hours 33.0 400-450 1.4 < 50 VOC
Acrylic-Alkyd - Satin

204 Super Kote 5000® Waterborne 4 hours 40.0 400-450 1.5 < 50 VOC
Acrylic-Alkyd - Semi-Gloss

Product Description Features/Benefits
• Smooth, durable finish
203, 204: Super Kote 5000® Waterborne Acrylic-Alkyd delivers the desired flow and leveling characteristics • Exceptional flow and leveling
• Easy application
of conventional alkyd paints while also providing a tough satin or semi-gloss finish that stands up to • Outstanding adhesion
repeated washing. • Excellent hide
Available Colors: White. Tint bases available for all colors. • Withstands repeated washings

Coronado®

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 89
†For the most up-to-date MPI specifications, visit www.mpi.net

Interior Paint

Super Kote® 3000 Interior Paint

Optimal balance between performance and value, delivering exceptional touch-ups and
washability in a low-VOC formula (flat and eggshell).

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
301 Super Kote® 3000 Interior Paint - Flat Time (± 2%) Qualifies for LEED® 2009
(Sq. Ft.) (Avg.) Qualifies for LEED® 2009
Qualifies for LEED® 2009
4 hours 29.1 350-450 1.2 < 50 VOC

302 Super Kote® 3000 Interior Paint - Eggshell 4 hours 30.2 300-400 1.4 < 50 VOC

304 Super Kote® 3000 Interior Paint - Semi-Gloss 4 hours 28.9 300-400 1.4 < 100 VOC

Product Description Features/Benefits
• Exceptional touch-up
301, 302, 304: Super Kote® 3000 is newly improved for undetectable touch-ups and excellent hide. • Durable, washable finish
• Excellent hide
Designed to facilitate getting the job done right, this low-VOC (flat and eggshell) product is ideal for new • High production speed
work or re-paints, including commercial, residential, and new construction projects. • Low-VOC (flat and eggshell)
Available Colors: White. Tint bases available for all colors.

90 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net

Interior Paint

Super Kote® 1000 Interior Paint

An interior latex paint that is value-engineered to deliver good service at a low cost.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
88 Super Kote® 1000 Interior Paint - Flat Time (± 2%) Qualifies for LEED® 2009
(Sq. Ft.) (Avg.)

4 hours 30.0 300-400 1.1 < 50 VOC

Product Description Features/Benefits

88: Super Kote® 1000 is a quality-grade, low-VOC, vinyl-latex paint that provides good dry hide on interior • Good dry hide
• Easy application
wall surfaces. Not intended for areas that require frequent washing, this value-maintenance finish is ideal for • Good touch-up
rental properties and commercial sites. • Low-VOC
Available Colors: White

Coronado® FinalTouch® Wall Paint Coronado®

Formulated to provide perfect touch-up and final finishing for all interior
new construction wall surfaces.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
62 FinalTouch® Wall Paint - Flat Time (± 2%) –
(Sq. Ft.) (Avg.)

4 hours 33.0 300-400 1.6 < 50 VOC

Product Description Features/Benefits

62: FinalTouch® is designed to feather smoothly with a fine nap roller to provide invisible touch-ups. It is an • Excellent touch-up
• Fast-drying
ideal flat coating for new construction, general maintenance, apartments, and budget-minded consumers. • Resists spattering
Available Colors: White. Pastel and tint base available.

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 91
†For the most up-to-date MPI specifications, visit www.mpi.net

Ceiling Paint

Coronado® Optimum Hide® Ceiling White

High touch-up, flat interior ceiling white that is quick-drying.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
4 Optimum Hide® Ceiling White Time (± 2%) –
(Sq. Ft.) (Avg.)

2-3 40.3 300-400 1.8 < 50 VOC
hours

Product Description Features/Benefits
• Uniform flat finish
4: Optimum Hide® Ceiling White is a quick-drying flat finish designed for interior ceilings. It is ideal for areas • High-hiding
• Dries within 30 minutes
that must remain in service while being painted, such as hotels, offices, hospitals, and nursing homes. It dries • Spatter-resistant
to a bright white and minimizes surface imperfections.
Available Colors: White.

92 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.

†For the most up-to-date MPI specifications, visit www.mpi.net

Exterior Paint

Cryli Cote® 100% Acrylic Exterior Paint

A lasting, durable protective finish with good coverage and superb color retention.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
Time (± 2%) MPI 10
(Sq. Ft.) (Avg.) –
–
10 Cryli Cote® 100% Acrylic Exterior Paint - Flat 4 hours 35.0 300-400 1.7 < 50 VOC

C410 Cryli Cote® 100% Acrylic Exterior Paint - Satin 4 hours 40.0 350-450 1.6 < 50 VOC
< 50 VOC
C2 Cryli Cote® 100% Acrylic Exterior Paint - 4 hours 35.0 325-425 1.5
Semi-Gloss

Product Description Features/Benefits
• Durable, anti-fade finish
10, C410, C2: Cryli Cote® combines a durable finish with premium color retention for protection against • Excellent color retention
• Protects against cracking and peeling
the elements. With its 100% acrylic formula, this hard-working paint adheres powerfully and dries quickly. • Self-priming on the majority of surfaces
It’s finish also delivers dependable resistance to mildew and blistering. • Excellent adhesion
Available Colors: White. Tint bases available for all colors.

Coronado®

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 93
†For the most up-to-date MPI specifications, visit www.mpi.net

Exterior Paint

Super Kote 5000® Exterior

Designed to cover fully and dry quickly while leaving lasting protection against weathering.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
801 Super Kote 5000® Exterior - Flat Time (± 2%) MPI 10
803 Super Kote 5000® Exterior - Satin (Sq. Ft.) (Avg.) MPI 214
804 Super Kote 5000® Exterior - Semi-Gloss –
4 hours 32.0 300-400 1.5 < 50 VOC

4 hours 32.5 350-450 1.4 < 100 VOC

4 hours 30.2 300-400 1.4 < 100 VOC

Product Description Features/Benefits
• Proprietary 100% acrylic blend
801, 803, 804: Acrylic exterior paint designed to provide lasting service over new or previously painted • Durable, attractive finish
• Dries dust- and bug-free in 30 minutes
surfaces in good condition. It is formulated for excellent coverage and color retention. • Excellent color retention
Available Colors: White. Tint bases available for all colors. • Blister-resistant

94 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net

Rust-Preventive & Waterborne Enamels

Rust Scat® Waterborne Acrylic Enamels

Waterborne interior/exterior finishes with exceptional adhesion on primed metal,
wood, or masonry surfaces.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
Time (± 2%) MPI 114, 154; Qualifies for LEED® 2009
(Sq. Ft.) (Avg.)
MPI 153
80✦ Rust Scat® Waterborne Acrylic Enamel - 2 hours 36.0 350-450 1.6 < 250 VOC MPI 107; Qualifies for LEED® 2009
Gloss

90✦ Rust Scat® Waterborne Acrylic Enamel - 4 hours 38.0 350-450 1.6 < 150 VOC
Semi-Gloss

36 Rust Scat® Waterborne Acrylic Enamel - 2-4 41.6 250-450 1.7 < 250 VOC
Primer hours

Product Description Features/Benefits

80, 90: Rust Scat® Waterborne Acrylic Enamel is suitable for interior or exterior use. Engineered for metal • Easy application Coronado®
• Tenacious adhesion
surfaces, it also adheres to primed masonry, drywall, and wood. It has tenacious adhesion and provides • Excellent wetting properties
excellent color and gloss retention. Non-concrete surfaces must be primed prior to application. • Cures to a durable, attractive finish
• Recoat in 2 hours
80: Available Colors: White, Black, Terra Cota, Battleship Gray, Sandstone, OSHA Red, OSHA Blue, Mack Green, • Suitable for USDA-inspected facilities

OSHA Orange, International Orange, OSHA Green, National Blue, OSHA Yellow, Oxford Brown, Silver Gray, Walnut,
Duronodic Bronze (satin sheen), Safety Red. Tint bases available for all colors.

90: Available Colors: White, Black. Tint bases available for all colors.

✦Product available in lower-VOC formulation.

36: Rust Scat® Waterborne Acrylic Primer provides protection from rust bleed and flash rusting. • Easy application by brush, roller, or sprayer
• Tenacious adhesion, even to galvanized metal
It is suitable for use over galvanized metal, but is not intended for immersion services. • Can be top coated with conventional alkyd, oil-based, or latex paints
Available Colors: White. • May be used as a tiecoat over zinc-rich primers
• Suitable for USDA-inspected facilities

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 95
†For the most up-to-date MPI specifications, visit www.mpi.net

Rust-Preventive & Waterborne Enamels

Rust Scat® Polyurethane Enamels

Rust-preventive coatings for metal substrates that are easy-to-apply, offer excellent adhesion
and wetting properties, and cure to a durable, attractive finish.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
31✦ Rust Scat® Polyurethane Enamel - Gloss Time (± 2%) MPI 48
(Sq. Ft.) (Avg.) –
–
24 hours 48.7 300-400 2.3 > 250 VOC MPI 23, 79

13 Rust Scat® Polyurethane Enamel - Semi-Gloss 24 hours 49.5 300-400 2.3 > 250 VOC

651 Rust Scat® Polyurethane Enamel - Satin 24 hours 50.7 300-400 2.4 > 250 VOC

35 Rust Scat® Alkyd Metal Primer 24 hours 56.2 400-500 2 > 250 VOC

Product Description Features/Benefits
• Easy application
31, 13, 651: Rust Scat® Polyurethane Enamel is a rust-preventative coating that delivers exceptional • Tenacious adhesion
• Excellent wetting properties
hardness and durability. Formulated with a urethane-modified alkyd resin, it can be applied to interior • Cures to a durable, attractive finish
or exterior ferrous or non-ferrous metals. (Not intended for use over galvanized metal.) • Can be applied over painted surfaces

31: Available Colors: White, Black, Platinum, Terracotta, Battleship Gray, Sandstone, OSHA Red, OSHA Blue, • Easy application
• Tenacious adhesion
Mack Green, OSHA Orange, International Orange, Cat Yellow, OSHA Green, National Blue, OSHA Yellow, Oxford • Excellent wetting properties
Brown, Silver Gray, Walnut, Safety Red. Tint bases available for all colors. • Cures to a durable, attractive finish
• Can be applied over painted surfaces
✦Product available in lower-VOC formulation.

13: Available Colors: White. Tint bases available for all colors.
651: Available Colors: White, Satin Black, Duronodic Bronze. Tint bases available for all colors.

35: Rust Scat® Alkyd Metal Primer is a urethane-based, rust-preventing primer. It can be applied to

ferrous or non-ferrous metals, both indoors and out. (Not intended for use on non-ferrous metals,
such as galvanized metal or aluminum.)

Available Colors: White, Red

96 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.

†For the most up-to-date MPI specifications, visit www.mpi.net

Masonry Coatings

Super Kote 5000® Production Block Filler

Designed specifically for spray application to fill voids and create a smooth, uniform surface on
interior masonry block.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
958-11 Super Kote 5000® Production Block Filler Time (± 2%) MPI 4, 4 X-Green™; Eligible for LEED® v4 credit;
(Sq. Ft.) (Avg.)
Qualifies for CHPS low emitting credit;
8 hours 50.0 75-100 9.2 < 50 VOC CDPHv1 Emission Certified

Product Description Features/Benefits
• Creates a smooth, uniform surface
958-11: Super Kote 5000® Block Filler is designed specifically for spray application to fill voids and create a • Formulated for minimal tip clogging
• For application by airless spray
smooth, uniform surface on interior masonry block. It is packaged at a sprayable viscosity and is formulated • Can also be applied by brush
with raw materials selected to minimize tip clogging.
Available Colors: White.

Coronado®

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 97
†For the most up-to-date MPI specifications, visit www.mpi.net

Masonry Coatings

Coronado® Texcrete® Masonry Coatings

Includes an exterior hardscape waterproofer and exterior silicone-based water-repellent and sealer.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
Time (± 2%) MPI 117
(Sq. Ft.) (Avg.) –
MPI 42
194 Texcrete® Silicone Water Repellent – 13.7 100-200 Minimal < 50 VOC –

3194 Texcrete® WB Acrylic Masonry Waterproofer 4 hours 38.0 90-110 6 < 100 VOC
Smooth Finish

3196 Texcrete® WB Acrylic Masonry Waterproofer 4 hours 53.0 90-110 8.5 < 50 VOC
Medium Finish

3192 Texcrete® WB Acrylic Masonry Waterproofer 4 hours 43.7 90-110 7 < 100 VOC
Sand Finish

Product Description Features/Benefits
• Clear, invisible barrier
194: A clear, water-repellent sealer that produces a breathable barrier on masonry. This barrier prevents • Protects vertical and horizontal surfaces
• Alkali-resistant
chlorine penetration and reduces cracking, dirt pickup, efflorescence, and damage from freezing/thawing • Non-flammable
cycles. Because it is clear, the sealer penetrates deep into substrates without changing their appearance.
Available Colors: Clear • Breathable, high-build film
• Passes ASTM D6904 wind driven rain test and protects against
3194, 3196, 3192: High-build, low-VOC breathable waterproofing coatings designed for application by salt spray, acid rain, and UV light
• Allows moisture to pass through without blistering or loss of adhesion
the professional contractor to above grade concrete and masonry structures. These coatings are specifically • Superior durability
engineered to be applied direct-to-concrete and masonry surfaces without priming. They are designed to • Provides a mildew-resistant coating
resist high pH surfaces and therefore can be applied direct to new concrete without extended curing and
delays. These coatings pass the ASTM D6904 wind driven rain test and are resistant to salt spray, acid rain,
and UV light tested in 1 pinhole-free coat. The breathable, high-build film allows moisture vapor to pass
through without blistering or causing a loss of adhesion. Available in various textures, these products do
not require a primer or filler on smooth masonry surfaces.

3194, 3192: Available Colors: White, Deep Base, Accent Base.
3196: Available Colors: White.

98 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.

†For the most up-to-date MPI specifications, visit www.mpi.net