2020 Ben Moore Product Guide Complete Book

Masonry Coatings

Coronado® Elastite® Concrete Coatings

Designed to keep damaging water and moisture vapors out of commercial and residential
structures, and to create a flexible waterproofing membrane that prohibits wind driven rain
from entering through the coating film.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
Time (± 2%) –
(Sq. Ft.) (Avg.) –

160 Elastite® 10 Mil 100% Acrylic Elastomeric 4 hours 53.0 160-175 5.1 < 50 VOC MPI 38, 40
Coating –
–
162 Elastite® 20 Mil 100% Acrylic Elastomeric 6 hours 54.0 75-85 10.8 < 50 VOC
Coating

166 Elastite® SUPER-STRETCH 20 Mil 6 hours 52.0 75-85 10.5 < 50 VOC
100% Acrylic Elastomeric Coating

1066 Elastite® 100% Acrylic Masonry Sealer 2 hours 21.0 280-340 1.1 < 150 VOC

48 Elastite® 100% Acrylic Masonry Sealer 6-8 35.0 225-330 2.1 < 250 VOC
hours

Product Description Features/Benefits Coronado®
• Flexible waterproofing membrane
160, 162, 166: Elastite® 100% Acrylic Elastomeric Coating cures harder than traditional elastomeric • 200% elongation rating (applicable lines: 160, 162)
• 300% elongation rating (applicable lines: 166)
coatings on the outermost surface, giving this product much better resistance to dirt accumulation • Protects against wind driven rain
compared to traditional elastomerics. The coating remains flexible beneath the surface, bridging cracks • Resists dirt pickup
and moving with the building. • Excellent chalk binding sealer
Available Colors: White. • Alkali-resistant
• Protects against wind driven rain
1066: A waterborne, 100% acrylic penetrating surface sealer and chalk binder designed for all types • Resists dirt pickup

of masonry substrates. When applied properly, this product will provide a sound foundation for acrylic • Excellent chalk binding sealer
house paints and elastomeric waterproofing finishes. It may be applied to existing coatings showing a • Alkali-resistant
moderate degree of surface chalking or to new masonry surfaces with a pH up to 13. • Protects against wind driven rain
Available Colors: Clear, White. • Resists dirt pickup

48: Designed to penetrate deeply into the pores of masonry surfaces to stop dusting and to form a

foundation to support the Elastite® Coating System. An excellent chalk binding sealer resistant to the
effects of alkali up to a pH of 13.
Available Colors: White.

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 99
†For the most up-to-date MPI specifications, visit www.mpi.net

Specialty Coatings

Super Kote 5000® Dry Fall Coating

Designed for spray application to interior ceilings, walls, and structural members in commercial
and institutional buildings, as the overspray dries to a dust before reaching the floor.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
Time (± 2%) MPI 55
(Sq. Ft.) (Avg.)
MPI 118; Qualifies for LEED® 2009
105 Super Kote 5000® Dry Fall Coating 4 hours 36.3 300-400 1.7 > 250 VOC MPI 226; Qualifies for LEED® 2009
Alkyd - Flat

N110 Super Kote 5000® Dry Fall Coating 1 hour 40.0 250-425 2 < 50 VOC
Latex - Flat

112 Super Kote 5000® Dry Fall Coating 4 hours 35.8 375-475 1.4 < 100 VOC
Latex - Semi-Gloss

Product Description Features/Benefits
• High-hide
105: Designed for the professional spray applicator for use in airless or conventional spray equipment. • Quick-drying
• Spray dust can be swept up, vacuumed, or blown away
Atomized spray and bounce back flash-dry within an eight-foot fallout. • Reduces the need to cover floors and equipment
Available Colors: White. • High-hide
• Quick-drying
N110, 112: Formulated for spray application to interior ceilings, walls, and structural members in • Spray dust can be swept up, vacuumed, or blown away
• Reduces the need to cover floors and equipment
commercial and institutional buildings. The overspray dries to a dust before reaching the floor.
This feature reduces the cost of masking and covering procedures.

N110: Available Colors: White, Black.
112: Available Colors: White.

100 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net

Specialty Coatings

Super Kote 5000® Acrylic Knock Down

A high-solids knock down coating that yields a durable textured finish for public, commercial,
hospitality or residential use.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
Time (± 2%) Qualifies for LEED® 2009
(Sq. Ft.) (Avg.) Qualifies for LEED® 2009

908 Super Kote 5000® Acrylic Knock Down - Flat 4-6 48.7 100-200 6 < 50 VOC
hours

918 Super Kote 5000® Acrylic Knock Down - Satin 4-6 47.5 100-200 6 < 50 VOC
hours

Product Description Features/Benefits
• Durable, textured finish hides wear-and-tear
908, 918: Super Kote 5000® Acrylic Knock Down is a high-solids coating designed for durable, textured • High-solids formula
• Highly breathable coating
finishes in public, commercial, and residential buildings. Ideal for use in remedial work on a wide variety of • Provides a mildew-resistant finish
substrates to give surfaces a uniform, textured appearance that hides wear-and-tear. • Uniform, textured appearance
Available Colors: White • Ideal for remedial work

Coronado®

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 101
†For the most up-to-date MPI specifications, visit www.mpi.net

Exterior Stains

Coronado® Maxum® Stains and Primer

Formulated to provide a durable, mildew-resistant coating that will enhance the beauty and
appearance of wood substrates.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
B800 Alkyd Deck & Siding Primer Time (± 2%) MPI 5
(Sq. Ft.) (Avg.) –
–
16 hours 54.7 300-400 2.5 > 250 VOC –
MPI 156
B7300✦ Alkyd Translucent Deck & Siding Stain 24-48 31.0 150-400 Minimal > 250 VOC –
hours MPI 16

B7500✦ Alkyd Semi-Transparent Deck & Siding Stain 24-48 30.6 150-400 Minimal > 250 VOC
hours

B7400 Waterborne Alkyd Translucent Deck & Siding 4-6 21.8 150-400 Minimal < 250 VOC
Stain hours

B7600 Waterborne Alkyd Semi-Transparent Deck 4-6 21.8 100-300 Minimal < 250 VOC
& Siding Stain hours

B8500 100% Acrylic Solid Color Deck Stain 4-6 39.0 350-450 1.6 < 250 VOC
hours

B2000 Acrylic Latex Solid Color Siding Stain 4 hours 32.1 300-400 1.5 < 150 VOC

102 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net

Exterior Stains

Coronado® Maxum® Stains and Primer Continued

Product Description Features/Benefits Coronado®
• Prepares wood and promotes even color
B800: An alkyd primer formulated to block tannin, water, rust, and other stains and promote even color • Blocks tannin stains
• Can be top coated with oil or acrylic paint or solid color stain
on new and previously painted exterior woods. It can be top coated with oil or acrylic house paints and solid • Suitable for new or previously painted wood
color stain. • Excellent protection
Available Colors: White. • Resists chalking, peeling, blistering, and cracking
• Provides a fade- and mildew-resistant coating
B7300: An alkyd translucent deck and siding stain traditionally formulated to saturate the wood fibers, and
• Excellent protection
refurbish worn and weathered wood surfaces. It is lightly toned to enrich the appearance and texture of the • Resists chalking, peeling, blistering, and cracking
natural wood grains. • Provides a fade- and mildew-resistant coating
Available Colors: Clear, Natural, New Cedar, Yellow Cedar, Fresh Redwood, Dawn Redwood, Mountain Valley,
Mountain Canyon, Natural Honey, Chestnut Brown. • Excellent protection
✦Product available in lower-VOC formulation. • Resists chalking, peeling, blistering, and cracking
• Provides a fade- and mildew-resistant coating
B7500: An alkyd semi-transparent deck and siding stain traditionally formulated to saturate the wood • Excellent protection
• Easy soap and water clean-up
fibers, and refurbish worn and weathered wood surfaces. It is pigmented to add a shade of transparent color • Provides a fade- and mildew-resistant coating
that enhances the natural characteristics of wood. • Durable finish
Available Colors: Natural, Clear Base. • Scuff-resistant
✦Product available in lower-VOC formulation. • Excellent color retention
• Easy soap and water clean-up
B7400: A waterborne alkyd translucent deck and siding stain formulated for penetrating performance with • Provides a fade- and mildew-resistant coating
• Outstanding protection
easy water clean-up. It is lightly toned to enhance the appearance and texture of the natural wood grain. • Offers extreme hide
Available Colors: Clear, Natural, New Cedar, Yellow Cedar, Fresh Redwood, Dawn Redwood, Mountain Valley, • Generous open time to achieve uniform appearance
Mountain Canyon, Natural Honey, Chestnut Brown. • Easy soap and water clean-up
• Resistant to extremes in temperature, humidity, and constant UV exposure
B7600: A waterborne alkyd semi-transparent deck and siding stain formulated for penetrating

performance with easy water clean-up. It is pigmented to add a shade of transparent color that enhances
the natural textures and grain lines of wood.
Available Colors: Natural, Clear Base.

B8500: A 100% acrylic solid color deck stain formulated to provide a rugged finish that withstands heavy

foot traffic. The solid opaque color masks the grain allowing the texture of the wood to show and provides
a water-resistant coating for new or previously coated exterior decks.
Available Colors: White. Tint bases available for all colors.

B2000: An acrylic latex solid color siding stain formulated to provide a durable, fade-resistant finish.

The solid opaque color masks the grain accentuating the beauty and appearance of the natural texture
of the wood substrate.
Available Colors: Outside White. Tint bases available for all colors.

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 103
†For the most up-to-date MPI specifications, visit www.mpi.net

Notes

INSL-X®

Primers

Prime All® Multi-Surface Latex Primer Sealer

Designed for multiple interior and exterior surfaces with powerful stain blocking
and spatter resistance.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
Time (± 2%) MPI 6, 39, 137; Eligible for LEED® v4 credit;
(Sq. Ft.) (Avg.) Qualifies for CHPS low emitting credit;

AP-1000 Prime All® Multi-Surface Latex Primer Sealer 1 hour 35.0 400-450 1.3 < 50 VOC CDPHv1 Emission certified

Product Description Features/Benefits
• 100% acrylic
AP-1000: Prime All® Multi-Surface Latex Primer Sealer is a high-quality primer with great flow and • Powerful stain blocking
• Low-VOC
leveling. It has strong adhesion and sealing properties while drying to the touch in less than an hour. • Dry to touch in less than 1 hour
Available Colors: White • Spatter-resistant
• Mildew-resistant coating

Aqua Lock® Plus Primer Sealer

A multi-purpose primer sealer for outstanding everyday stain blocking on a variety of surfaces.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
AQ-0XXX Aqua Lock® Plus Primer Sealer Time (± 2%) MPI 39; Qualifies for LEED® 2009
(Sq. Ft.) (Avg.)

1 hour 41.0 300-400 1.9 < 50 VOC

Product Description Features/Benefits
• 100% acrylic
AQ-0XXX: Aqua Lock® Plus is a multi-purpose, 100% acrylic, water-based primer sealer for outstanding • Blocks tough stains
• Provides a mold-resistant coating, including in high-humidity areas
everyday stain blocking on a variety of surfaces. It adheres to interior and exterior surfaces and can be top • Quick-drying
coated with latex or oil-based coatings. • Top coat in 1 hour
Available Colors: White, Black, Deep Base

106 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net

Primers

Stix® Waterborne Bonding Primer

Premium-quality, acrylic-urethane primer with unparalleled adhesion to the most
challenging surfaces.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
SXA-110 Stix® Waterborne Bonding Primer Time (± 2%) Eligible for LEED® v4 credit; Qualifies for CHPS
(Sq. Ft.) (Avg.) low emitting credit; Health Product Declaration

3-4 40.0 300-400 1.9 < 100 VOC available; CDPHv1 Emission certified
hours

Product Description Features/Benefits
• Bonds to hard-to-coat surfaces
SXA-110: Premium-quality, acrylic-urethane primer with unparalleled adhesion to the most challenging • Cures in temperatures as low as 35°F
• Creates an extremely hard film
surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, • Excellent enamel holdout
and galvanized metals. • Can be top coated with almost any product
Available Colors: White

Prime Lock Plus Primer Sealer

A fast-drying alkyd resin coating that primes and seals plaster, wood, drywall, and previously
painted or varnished surfaces.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
PS-8000✦ Prime Lock Plus Primer Sealer Time (± 2%) MPI 69
(Sq. Ft.) (Avg.)

1-2 56.2 300-350 2.8 > 250 VOC
hours
Insl-x®
Product Description Features/Benefits
• High-hiding, multi-purpose alkyd primer sealer
PS-8000: Prime Lock Plus is a fast-drying alkyd resin coating that primes and seals plaster, wood, • Superior adhesion to glossy surfaces
• Fast-drying
drywall, and previously painted or varnished surfaces. It ensures the paint top coat has consistent sheen • Prevents bleed-through
and appearance (excellent enamel holdout), seals even the toughest stains without raising the wood grain, • Excellent enamel holdout
and can be top coated with any latex or alkyd finish coat. For interior use and spot priming exterior surfaces.
Available Colors: White
✦Product available in lower-VOC formulation.

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 107
†For the most up-to-date MPI specifications, visit www.mpi.net

Primers

Block Out® Interior Primer Sealer

A modified synthetic primer sealer carried in a special solvent that dries quickly and is
effective over many different stains.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
NO-4000 Block Out® Interior Primer Sealer Time (± 2%) MPI 45
(Sq. Ft.) (Avg.)

2 hours 56.9 325-425 2.5 > 250 VOC

Product Description Features/Benefits
• Solvent-based sealer
NO-4000: Block Out® is a modified synthetic primer sealer carried in a special solvent that dries quickly • Seals difficult stains
• Quick-dry formula allows for same-day priming and top coating
and is effective over many different stains, including water, tannin, smoke, rust, pencil, ink, nicotine, and • Top coat with alkyd or latex paints of any sheen
coffee. Block Out® primes, seals, protects, and can be used on bare or previously painted surfaces; interior
drywall, plaster, wood, or masonry; and exterior masonry surfaces. Can be used as a spot primer for exterior
wood shingles/composition siding.
Available Colors: White

Seal Lock® Plus Primer Sealer

An alcohol-based interior primer sealer that stops stains from bleeding through on plaster,
wood, metal, and masonry.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
IL-6800 Seal Lock® Plus Primer Sealer Time (± 2%) –
(Sq. Ft.) (Avg.)

2 hours 41.0 300-400 1.9 > 250 VOC

Product Description Features/Benefits
• Alternative to shellac
IL-6800: Seal Lock® Plus is an alcohol-based interior primer sealer that stops stains from bleeding • Seals stains from smoke, grease, and fire damage
• Seals porous surfaces for a uniform finish
through on plaster, wood, metal, and masonry. It helps block and lock down stains from smoke and fire • High alkali resistance
damage, and is an ideal replacement for pigmented shellac. Seal Lock® Plus may be used as a primer for
porous substrates or as a sealer/stain blocker.
Available Colors: White

108 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net

Primers

Block Out® Exterior Tannin Blocking Primer

A multi-purpose latex primer that blocks tannin stains on exterior wood, as well as
primes exterior metal and masonry surfaces.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
TB-1100 Block Out® Exterior Tannin Blocking Primer Time (± 2%) MPI 6
(Sq. Ft.) (Avg.)

4 hours 38.0 300-400 1.8 < 100 VOC

Product Description Features/Benefits
• Acrylic latex
TB-1100: Block Out® Exterior Tannin Blocking Primer is designed for use as a multi-purpose latex exterior • Exceptional tannin-blocking power
• Formulated for exterior wood, metal, and masonry
whole-house primer. Block Out® excels at priming exterior wood and is formulated for use on metal and • Can be used on new or weathered wood
masonry surfaces, siding or most exterior substrates. Its latex formula blocks tannin stains on all new and • Top coat with latex or alkyd paints
weathered wood surfaces and can be top coated with latex or alkyd finish coats.
Available Colors: White

Insl-x®

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 109
†For the most up-to-date MPI specifications, visit www.mpi.net

Floor Coatings

GarageGuard®

A water-based, catalyzed epoxy garage floor coating that delivers superior chemical, abrasion,
and impact resistance.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
EGG-XXX GarageGuard® Time (± 2%) –
(Sq. Ft.) (Avg.)

8 hours 45.0 250-300 2.7 < 250 VOC

Product Description Features/Benefits
• Waterborne 2-part epoxy
EGG-XXX: GarageGuard® is a water-based, catalyzed epoxy that delivers superior chemical, abrasion, and • Durable semi-gloss finish
• Will not lift existing coatings
impact resistance in a durable, semi-gloss coating. Ideal for garage floors, basement floors, and other concrete • Resists hot tire pickup from cars
surfaces. GarageGuard® is cross-linked for outstanding hardness and chemical resistance. • Recoat in 8 hours
Available Colors: Showroom Gray, Desert Sand, Tint Base, Neutral Base • Park vehicles in 3-5 days

Hot Trax®

A high-performance, ready-to-use, epoxy-fortified acrylic concrete and garage floor coating
that resists hot tire pickup and marring.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
HTF-XXX Hot Trax® Time (± 2%) Qualifies for LEED® 2009
(Sq. Ft.) (Avg.)

24 hours 37.0 300-400 1.8 < 50 VOC

Product Description Features/Benefits
• Low-VOC
HTF-XXX: Hot Trax® is a high-performance, ready-to-use, epoxy-fortified acrylic concrete and garage floor • Resists hot tire pickup
• Interior or exterior use
coating that resists hot tire pickup and marring common to driveways and garage floors. Hot Trax® seals and • Recoat in 24 hours
protects concrete from chemicals, water, oil, and grease. This durable, low-satin finish resists cracking and can • Park vehicles in 5-7 days
also be used on exterior concrete, masonry, stucco, cinder block, and brick.
Available Colors: Tintable White, Silver Gray, Light Gray, Accent Base

110 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net

Floor Coatings

Tough Shield® Floor and Patio

A waterborne, acrylic enamel designed to produce a rugged, durable finish for
interior and exterior floors and patios.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
CTS-3XXX Tough Shield® Floor and Patio Time (± 2%) –
(Sq. Ft.) (Avg.)

4-12 40.0 400-500 1.5 < 100 VOC
hours

Product Description Features/Benefits
• Outstanding durability
CTS-3XXX: Tough Shield® Floor and Patio Coating is a waterborne, acrylic enamel designed to produce • 100% acrylic enamel formula
• Good abrasion resistance
a rugged, durable finish with good abrasion resistance. For use on interior and exterior floors and patios, • Excellent wearing qualities
and a variety of other substrates. • For interior or exterior use
Available Colors: Tintable White, Black, Gray Pearl, Light Gray, Tile Red, Desert Sand, Saddle Brown, Tint Base,
Deep Base, Neutral Base

Sure Step® Acrylic Anti-Slip Coating

An acrylic floor coating formulated with a special anti-slip aggregate for a durable,
skid-resistant finish.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
SU-0XXX✦ Sure Step® Acrylic Anti-Slip Coating Time (± 2%) –
(Sq. Ft.) (Avg.)

8 hours 38.0 80-120 7.4 < 150 VOC

Product Description Features/Benefits Insl-x®

SU-0XXX: Sure Step® Acrylic Anti-Slip Coating provides a durable, skid-resistant finish for interior or exterior • High traffic resistance
• Ideal for stairs, walkways, patios, and more
application. Imparts excellent color retention, abrasion resistance, and resistance to ponding water. Sure Step is • Fast-drying
water-reduced, which allows for fast-drying, easy application, and easy clean up. • Durable
Available Colors: Tintable White, Gray Pearl, Light Gray, Tile Red, Pine Green, Desert Sand, Saddle Brown, • Easy application
Accent Base • Interior/exterior use
✦Product available in lower-VOC formulation. • Fills and seals minor surface cracks

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 111
†For the most up-to-date MPI specifications, visit www.mpi.net

Floor Coatings

Insl-x® Decorative Floor Flakes

Transform any concrete floor into a beautiful surface with Insl-x® Decorative Floor Flakes.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
EGF-XXX Decorative Floor Flakes Time (± 2%) –
(Sq. Ft.) (Avg.)

– – 20-150 – –

Product Description Features/Benefits
• Colorfast, UV stable pigments
EGF-XXX: Easy-to-use and available in seven different color combinations, these flakes can disguise surface • Optimal flexibility and strength
• Easy-to-use sprinkle top
imperfections and help hide dirt.
Available Colors: Blue Blend, Red Blend, Brown Blend, Gray Blend, Black, Silver Metallic, Gold Metallic

Colors:

Blue Blend Red Blend Brown Blend Gray Blend
(EGF601099) (EGF700099) (EGF800099) (EGF900099)

Black Silver Metallic Gold Metallic
(EGF701099) (EGF801099) (EGF901099)

112 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net

Masonry Coatings

TuffCrete® Concrete Coatings

A collection of bonding primers, stains, and waterproofers that repel water, add color, and
beautify a variety of masonry surfaces.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
FLB-100 TuffCrete® Acrylic Epoxy Bonding Primer Time (± 2%) Qualifies for LEED® 2009
(Sq. Ft.) (Avg.)
MPI 58
4 hours 17.0 150-350 1.7 < 100 VOC MPI 58, 104

CST-2XXX✦ TuffCrete® Waterborne Acrylic Concrete Stain 4 hours 28.0 450-550 0.9 < 250 VOC

CST-5XXX TuffCrete® Solvent Acrylic Concrete 2 hours 25.0 300-400 1.2 > 250 VOC
Waterproofing Stain

Product Description Features/Benefits Insl-x®
• Clear sealer formulated to penetrate and bond to concrete
FLB-100: TuffCrete® Acrylic Epoxy Bonding Primer is a specially engineered acrylic-epoxy sealer for • Improves top coat adhesion
• Locks down latent residue
masonry floors, designed to lock down latent residue on masonry surfaces and provide enhanced adhesion
and bonding of finish coats. Ideal for application to garage floors and weathered exterior masonry walkways • Waterborne acrylic formula
and patio surfaces. • Color fade resistance
Available Colors: Clear • Fast-drying
• Rugged, durable finish
CST-2XXX: TuffCrete® Waterborne Acrylic Concrete Stain is a water-reduced acrylic concrete coating • Resists detergents, oils, grease, and scrubbing
• For interior or exterior masonry surfaces
designed for application to interior or exterior masonry surfaces. It can be applied in one coat as a stain, • Excellent adhesion
or in two coats for an opaque finish. • Durable low-sheen finish
Available Colors: Tintable White, Clear (High Gloss), Gray Pearl, Light Gray, Tile Red, Desert Sand, Saddle Brown, • Color fade resistance
Deep Base, Neutral Base • Quick-drying
✦Product available in lower-VOC formulation. • Deep concrete penetration
• Superior wear resistance
CST-5XXX: TuffCrete® Solvent Acrylic Concrete Waterproofing Stain is a solvent-borne acrylic concrete

stain designed for deep penetration into concrete surfaces. With excellent adhesion, this product delivers
outstanding durability in a low-sheen finish that helps to hide surface defects. It can be applied in one coat
as a stain, or in two coats for an opaque finish.
Available Colors: Clear (High Gloss), Tintable White, Gray Pearl, Light Gray, Tile Red, Terracotta, Desert Sand,
Saddle Brown, Neutral Base

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 113
†For the most up-to-date MPI specifications, visit www.mpi.net

Masonry Coatings

WaterBlock® Acrylic Masonry Waterproofer

Designed to seal interior and exterior masonry surfaces such as basement walls,
foundations, and retaining walls.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
AMW-1000 WaterBlock® Acrylic Masonry Waterproofer Time (± 2%) –
(Sq. Ft.) (Avg.)

4 hours 45.5 75-100 8.5 < 100 VOC

Product Description Features/Benefits
• Seals vertical masonry surfaces
AMW-1000: WaterBlock® Acrylic Masonry Waterproofer is designed to seal interior and exterior masonry • Withstands up to 12 psi hydrostatic pressure (when used properly)
• Provides a mold- and mildew-resistant coating
surfaces such as basement walls, foundations, and retaining walls. WaterBlock is alkali-resistant and provides • Alkali-resistant
positive sealing and waterproofing over bare concrete block, brick, stucco, or tilt-up concrete walls.
Available Colors: White

114 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net

Pool Paints

Insl-x® Pool Paints

A collection of four pool paint technologies to meet the needs of almost any pool painting situation.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
Time (± 2%) –
(Sq. Ft.) (Avg.) –
–
WR-10XX Waterborne Swimming Pool Paint - 4-6 38.0 300-400 1.8 > 250 VOC –
Semi-Gloss hours

RP-27XX Rubber Based Swimming Pool Paint - Satin 12-24 59.0 400-500 2.2 > 250 VOC
hours

CR-26XX Chlorinated Rubber Swimming Pool Paint 24 hours 33.0 250-300 2 > 250 VOC

IG-40XX Epoxy Pool Paint 3 hours 62.0 350-400 2.7 > 250 VOC

Product Description Features/Benefits Insl-x®
• Acrylic emulsion pool paint
WR-10XX: Waterborne Swimming Pool Paint can be applied to slightly damp surfaces, dries quickly for • Can be applied over most types of properly prepared existing pool paints
• Ideal for bare concrete, marcite, gunite, and other masonry
recoating, and withstands continuous submersion in fresh or salt water. Use Waterborne Swimming Pool Paint • Long-lasting color and protection
over most types of properly prepared existing pool paints, as well as bare concrete or plaster, marcite, gunite, • Quick-drying
and other masonry surfaces in sound condition. • OTC-compliant, solvent-based pool paint
Available Colors: White, Aquamarine, Ocean Blue, Royal Blue, Red, Black • For residential or commercial pools
• Excellent chemical and abrasion resistance
RP-27XX: Rubber Based Swimming Pool Paint provides a durable low-sheen finish for use in residential • For use over existing chlorinated rubber or synthetic rubber-based
pool paints
and commercial concrete pools. It delivers excellent chemical and abrasion resistance and is suitable for use in • Ideal for bare concrete, marcite, gunite, and other masonry
fresh or salt water. Also acceptable for use in chlorinated pools. Use Rubber Based Swimming Pool Paint over • For use in fresh, salt water, or chlorinated pools
previous chlorinated rubber paint or synthetic rubber-based pool paint or over bare concrete, marcite, gunite, • Chlorinated rubber system
or other masonry surfaces in good condition. • For use on new or old in-ground masonry pools
Available Colors: White, Aquamarine, Ocean Blue, Royal Blue, Black • For use in fresh, salt water, or chlorinated pools

CR-26XX: Chlorinated Rubber Swimming Pool Paint is a chlorinated rubber coating for new or old • Two-component polyamide epoxy pool paint
• For use on concrete, marcite, gunite, fiberglass, and steel pools
in-ground masonry pools. It provides excellent chemical resistance and is durable in fresh or salt water, • Can also be used over existing epoxy coatings
and also acceptable for use in chlorinated pools. Use Chlorinated Rubber Swimming Pool Paint over • Extremely durable
existing chlorinated rubber based pool paint or over bare concrete, marcite, gunite, or other masonry • Resistant to common pool chemicals, including chlorine
surfaces in good condition.
Available Colors: White, Aquamarine, Ocean Blue, Royal Blue, Red, Black

IG-40XX: Epoxy Pool Paint is a high solids, two-component polyamide epoxy coating that offers excellent

chemical and abrasion resistance. It is extremely durable in fresh and salt water and is resistant to common
pool chemicals, including chlorine. Use Epoxy Pool Paint over previous epoxy coatings, steel, fiberglass, bare
concrete, marcite, gunite, or other masonry surfaces in sound condition.
Available Colors: White, Ocean Blue, Royal Blue, Red, Black

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 115
†For the most up-to-date MPI specifications, visit www.mpi.net

Traffic Coatings

Insl-x® Traffic Paints

Latex, acrylic fast set, and alkyd traffic and marking paints in a variety of colors.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
TP-22XX Latex Traffic Paint Time 4-inch line: < 100 VOC MPI 97
TP-32XX Latex Traffic Paint - Yellow 4 hours (± 2%) 680-960 linear feet (Avg.) < 50 VOC MPI 97
TP-23XX Acrylic Fast Set Traffic Paint < 50 VOC MPI 97
TP-33XX Acrylic Fast Set Traffic Paint - Yellow 33.9 2.1 < 50 VOC MPI 97
TP-24XX Alkyd Zone Marking Paint > 250 VOC MPI 32
TP-34XX Alkyd Zone Marking Paint - Yellow 3-4 39.0 4-inch line: 5 > 250 VOC MPI 32
hours 328-480 linear feet

1 hour 60.0 4-inch line: 9
320 linear feet

1 hour 60.0 4-inch line: 9
320 linear feet

4 hours 53.5 4-inch line: 8
320 linear feet

4 hours 53.5 4-inch line: 8
320 linear feet

Product Description Features/Benefits
• Acrylic latex traffic paint
TP-22XX, TP-32XX: Latex Traffic Paint is a fast-drying, exterior/interior acrylic latex line marking paint. • Fast dry
• Exterior/interior use
It can be applied with a brush, roller, or hand or automatic line markers.
• Acrylic fast set traffic paint
TP-22XX: Available Colors: White, Red, Black, Handicap Blue • Dries in 20 minutes to touch
TP-32XX: Available Colors: Yellow • Ideal for marking traffic lanes

TP-23XX, TP-33XX: Acrylic Fast Set Traffic Paint is a fast-drying acrylic paint for marking traffic lanes • Alkyd zone marking paint
• Designed for use on concrete or asphalt
on streets, highways, parking lots, warehouses, and other areas where such markings are required. • Resists abrasion, oils, grease, gasoline, and severe weather

TP-23XX: Available Colors: White
TP-33XX: Available Colors: Yellow

TP-24XX, TP-34XX: Alkyd Zone Marking Paint is a fast-drying, exterior/interior zone marking

paint designed for use on concrete and asphalt surfaces. It resists abrasion, oils, grease, gasoline, and
severe weather.

TP-24XX: Available Colors: White
TP-34XX: Available Colors: Yellow

116 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net

Athletic Coatings

Insl-x® Latex Field Marking Paints

Concentrated marking paste and ready-to-use paint for grass and turf fields.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
B0-5500 Latex Field Marking Paste Time < 50 VOC –
FM-65XX Latex Field Marking Paint 1 hour (± 2%) 3-inch line: 400 linear feet (Avg.) < 50 VOC –
4-inch line: 300 linear feet
4 hours 30.0 6-inch line: 200 linear feet Minimal
3-inch line: 350-450 linear feet
27.0 4-inch line: 265-340 linear feet 4.4
6-inch line: 175-225 linear feet

Product Description Features/Benefits
• This is a concentrate to which water must be added for use
B0-5500: Latex Field Marking Paste is specifically designed for use on natural or artificial turf, concrete, • Fast-drying
• For use on natural or artificial turf
and asphalt as a semi-permanent coating for line marking or artistic graphics. • Can also be used on concrete or asphalt
Available Colors: White • Semi-permanent coating
• Ideal for line marking and graphics
FM-65XX: Latex Field Marking Paint is specifically designed for use on natural or artificial turf, concrete, and • Fast-drying
• Ideal for line marking and graphics
asphalt as a semi-permanent coating for line marking or artistic graphics. • For use on natural or artificial turf
Available Colors: White, Yellow • Can also be used on concrete or asphalt
• Semi-permanent coating

Insl-x®

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 117
†For the most up-to-date MPI specifications, visit www.mpi.net

Athletic Coatings

Tru-flex® Recreational Coatings

Specially designed to coat and line a variety of tennis and other outdoor sport courts.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
TRC-007 Tru-flex® Concrete Bond Coat Time (± 2%) –
TRC-035 Tru-flex® Patch N Level (Sq. Ft.) (Avg.) –
TRC-038 Tru-flex® Line Marking Paint –
TRC-040 Tru-flex® Neutral Filler Coat 1-2 44.6 120 Minimal < 100 VOC –
TRC-060 Tru-flex® Cushion Coat hours –
TRC-08X Tru-flex® Smooth Colored Finish Coat –
TRC-28X Tru-flex® Textured Colored Finish Coat – 59.6 – – < 50 VOC –

3-4 38.1 180-225 – < 100 VOC
hours

3-4 61.2 Undiluted: 135 – < 100 VOC
hours Diluted: 90

3-4 43.2 Undiluted: 75 – < 100 VOC
hours Diluted: 65

3-4 26.2 Undiluted: 150 2.8 < 250 VOC
hours Diluted: 75

3-4 31.4 80 – < 100 VOC
hours

118 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net

Athletic Coatings

Tru-flex® Recreational Coatings Continued

Product Description Features/Benefits
• Acrylic bond coat for tennis courts
TRC-007: Tru-flex® Concrete Bond Coat is formulated with acrylic polymers that are specially designed for • Adds years of life to the court surface
• Product is formulated for onsite dilution prior to use
sealing and binding concrete surfaces. It acts as a bonding membrane that allows all Tru-flex® Recreational
Coating Systems to adhere tightly to bare masonry and concrete. • Flexible film is not affected by heat or cold
Available Colors: Clear • Film possesses breathing ability enabling normal moisture to
pass through as vapor
TRC-035: Tru-flex® Patch N Level is a ready-to-use, non-shrinking, non-cracking patching compound for • Non-shrinking patching compound for smoothing small areas
• Used to mark lines on tennis courts and other recreational surfaces
depressions in tennis courts. It is recommended for smoothing and leveling small areas 1-2 ft. in diameter. • High-hiding for clean, clear cut lines
Available Colors: Neutral • Flexible film is not affected by heat or cold
• Film possesses breathing ability enabling normal moisture to pass
TRC-038: Tru-flex® Line Marking Paint is high-hiding and used to mark lines on tennis courts and other through as vapor
• Dries rapidly and allows moisture vapor to pass through the dried film
recreational surfaces. It is designed to give superior lines on all types of asphalt and acrylic surfaces. • Provides a uniform and controlled texture
Available Colors: White • Use over painted or unpainted asphalt and concrete tennis court
surfaces and other play areas
TRC-040: Tru-flex® Neutral Filler Coat consists of 100% acrylic emulsions, special reinforcing pigments, and • Dries rapidly and allows moisture vapor to pass through the dried film
• Provides a uniform and controlled texture
special size pure silica sand that provides a uniform and controlled texture. It protects asphalt courts from the • Use over painted or unpainted asphalt and concrete tennis court
ultra-violet rays of the sun. surfaces and other play areas
Available Colors: Neutral
• High-performance acrylic emulsion coating
TRC-060: Tru-flex® Cushion Coat is a high-performance coating consisting of encapsulated rubber particles • For use on tennis and other athletic courts
• Long-lasting color retention
and fillers, carefully blended with 100% acrylic emulsion to create a shock-absorbing type of color surface
when used as part of the Tru-flex® system. It has a uniform texture and adds resilience to asphalt and concrete • Flexible, fade-resistant, and dries quickly to a tough, durable color surface
court surfaces. • Provides a long-lasting textured finish for tennis and sports courts
Available Colors: Neutral • Use over painted or unpainted asphalt and concrete tennis court
surfaces and other play areas
TRC-08X: Tru-flex® Smooth Colored Finish Coat is a high-performance 100% acrylic emulsion coating,

highly pigmented with prime color and reinforcing pigments that will provide a long-lasting finish for
tennis and athletic courts. It protects asphalt from UV rays to provide unsurpassed durability.
Available Colors: Green, Red, Blue, Dark Green

TRC-28X: Tru-flex® Textured Colored Finish Coat is a 100% acrylic emulsion coating, highly pigmented with

prime color that will provide a long-lasting textured finish for tennis and sports courts. It can be applied over
painted or unpainted asphalt, concrete tennis court surfaces or other play areas, and over Tru-flex® Filler Coat
or Tru-flex® Cushion Coat products.
Available Colors: Green, Red, Blue, Dark Green

Insl-x®

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 119
†For the most up-to-date MPI specifications, visit www.mpi.net

Specialty Coatings

Insl-x® Cabinet Coat

Makes cabinets, shelves, trim or furniture look new again with an ultra-smooth, long-lasting finish.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
CC-55XX Cabinet Coat - Satin Time (± 2%) MPI 140; Qualifies for LEED® 2009
CC-56XX Cabinet Coat - Semi-Gloss (Sq. Ft.) (Avg.) MPI 141; Qualifies for LEED® 2009

6 hours 35.2 350-450 1.4 < 50 VOC

6 hours 35.0 350-450 1.4 < 50 VOC

Product Description Features/Benefits
• Ultra-smooth finish
CC-55XX, CC-56XX: Cabinet Coat refreshes kitchen and bathroom cabinets, shelving, furniture, trim • Urethane-acrylic formula
• Refurbishes worn cabinets
and crown molding, and other interior applications that require an ultra-smooth, factory-like finish with • Adheres to hard-to-coat surfaces without a primer
long-lasting beauty.
Available Colors: White. Tint bases available for all colors.

Insl-x® Color-Changing Ceiling Paint

Goes on pink and dries white to help prevent missed spots, and provides a uniform, flat finish.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
PC-1200 Color-Changing Ceiling Paint Time (± 2%) –
(Sq. Ft.) (Avg.)

2 hours 28.0 300-400 1.3 < 50 VOC

Product Description Features/Benefits
• Disappearing pink color-change technology
PC-1200: Color-Changing Ceiling Paint is applied as a light pink color to indicate painted areas • Uniform, flat finish
• Self-priming
for preventing missed spots. It dries to a uniform, white finish in a flat sheen that helps minimize • For smooth or textured coatings
the appearance of surface imperfections. • Spatter-resistant
Available Colors: White • Low-VOC

120 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net

Specialty Coatings

Insl-x® Fire Retardant Paint

Retards flame spread, minimizes smoke development, and applies like a conventional latex flat paint.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
FR-210 Fire Retardant Paint Time (± 2%) –
(Sq. Ft.) (Avg.)

2 hours 48.5 150 5.2 < 50 VOC

Product Description Features/Benefits
• Slows the spread of fire and smoke
FR-210: Fire Retardant Paint expands and forms a thick cellular char blanket, called intumescence, when • Chemical reaction forms intumescence
• For commercial and residential use
attacked by flame. This latex paint retards flame spread, minimizes smoke development, and applies like a • Low-VOC
conventional latex flat paint. • Dries to a decorative flat finish
Available Colors: White

Lead Block®

A water-based elastomeric acrylic coating with excellent adhesion, elongation,
and tensile strength characteristics.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
EC-3210 Lead Block® Time (± 2%) Qualifies for LEED® 2009
(Sq. Ft.) (Avg.)

4-12 44.0 85-100 7.5 < 100 VOC
hours

Product Description Features/Benefits Insl-x®
• Cost-effective alternative to lead paint remediation
EC-3210: Lead Block® is a water-based elastomeric acrylic coating with excellent adhesion, elongation, • Creates a barrier over lead paints
• For interior or exterior use
and tensile strength characteristics. When applied to surfaces bearing lead-containing paint, this product • Spray application preferred
will seal in the lead paint with a thick, elastic membrane sheathing. • Can be used as a primer or top coat
Available Colors: White

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 121
†For the most up-to-date MPI specifications, visit www.mpi.net

Specialty Coatings

Insl-x® Decorative and Specialty Spray Paints

Provides a beautiful, smooth, durable finish with easy spray-at-any-angle application
that provides even coverage and dries quickly.

Code Product Recoat Wt. Sol. Cov. DFT mils VOC % Specifications†
AC-01XX Decorative Aerosol - Gloss Time (± 1%) –
AC-02XX Decorative Aerosol - Satin (Sq. Ft.) (Avg.) –
AC-03XX Decorative Aerosol - Flat –
AC-04XX Decorative Aerosol - Primer 1 hour 14.6 5-6 1-2 Max. 65% –
AC-05XX Decorative Aerosol - Fluorescent –
AC-06XX Decorative Aerosol - Lacquer 1 hour 16.0 6-8 1-2 Max. 65% –
AC-07XX Decorative Aerosol - High Heat –
AC-08XX Decorative Aerosol - Metallic 1 hour 19.8 6-8 1-3 Max. 60% –
AC-09XX Decorative Aerosol - Epoxy –
1 hour 22.0 7-9 1.5-3 Max. 60%

1 hour 30.1 5-7 2-5 Max. 75%

1 hour 8.1 8-9 1-2 Max. 67%

2 hours 21.7 7-8 1-2 Max. 80%

1 hour 13.9 11-13 1-2 Max. 80%

24 hours 17.4 6-8 1-2 Max. 65%

122 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net

Specialty Coatings

Insl-x® Decorative and Specialty Spray Paints Continued

Product Description Features/Benefits

AC-01XX, AC-02XX, AC-03XX: Decorative Spray Paints are formulated to dry quickly and provide a • Interior/Exterior
• Fast-drying
durable, long-lasting finish. • Long-lasting finish

AC-01XX: Available Colors: White, Black, Clear Acrylic, Navajo White, Ivory, Heirloom White, Almond,

Awareness Pink, Banner Orange, Americana, Royal Blue, Coastal Calm, Sunflower Yellow, Daffodil, Hunter Green,
Autumn Fern, Leather Brown, Slate Gray, Pewter Gray, Shutter Red, Fiesta Red, Hot Red, Calypso, Pumpkin
Orange, Apple Green, Plum Purple

AC-02XX: Available Colors: White, Black, Clear Acrylic, Almond, Wild Rapids, Gale Winds, Burgundy,

Gibraltar, Khaki

AC-03XX: Available Colors: White, Black

AC-04XX: Decorative Primer Spray Paints are formulated to dry quickly and prepare the surface for better • Interior/Exterior
• Fast-drying
top coat adhesion. • Seals the surface for a uniform finish
Available Colors: White, Gray

AC-05XX: Decorative Fluorescent Spray Paints are formulated to dry quickly and provide a durable, • Interior/Exterior
• Fast-drying
long-lasting finish. • Long-lasting finish
Available Colors: Blazing Orange, Hot Red, Bright Yellow, Glo Green, Neon Blue, Red Orange, Electric Pink

AC-06XX: Decorative Lacquer Spray Paints are formulated to dry quickly and provide a durable, • Interior/Exterior
• Fast-drying
long-lasting, high-gloss finish. • Long-lasting finish
Available Colors: White, Black, Clear

AC-07XX: Decorative High Heat Spray Paints are formulated to provide heat resistance up to 1000°F while • Interior/Exterior
• Fast-drying
also providing excellent adhesion and minimal color change. • Long-lasting finish
Available Colors: White, Black, Aluminum

AC-08XX: Decorative Metallic Spray Paints provide a high-gloss metallic sheen and are formulated to dry • Interior/Exterior
• Fast-drying
quickly while providing a durable, long-lasting finish. • Long-lasting finish
Available Colors: Silver, Gold, Copper, Chrome

AC-09XX: Decorative Epoxy Spray Paints are high-gloss and formulated to resist chipping, cracking, • Interior/Exterior
• Fast-drying
and peeling. • Resists chipping
Available Colors: White, Black, Almond

Insl-x®

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 123
†For the most up-to-date MPI specifications, visit www.mpi.net

Specialty Coatings

Insl-x® Rust Preventative Spray Paints

Makes metal look like new and protects against rust.

Code Product Recoat Wt. Sol. Cov. DFT mils VOC % Specifications†
AC-10XX Rust Preventative Aerosol - Primer Time (± 1%) –
AC-11XX Rust Preventative Aerosol - Gloss (Sq. Ft.) (Avg.) –
AC-12XX Rust Preventative Aerosol - Satin –
AC-13XX Rust Preventative Aerosol - Flat 1 hour 22.1 7-9 3-5 Max. 60% –
AC-14XX Rust Preventative Aerosol - Safety Colors –
1 hour 23.5 6-8 1.5-2.5 Max. 65%

1 hour 16.8 7-9 1.5-2.5 Max. 65%

1 hour 16.8 7-9 1.5-2.5 Max. 60%

1 hour 23.5 Varies 1.5-2.5 Max. 65%

Product Description Features/Benefits
• Interior/Exterior
AC-10XX: Rust Preventative Primer Spray Paints are formulated to protect against rust and prepare the • Direct-to-metal
• Protects against rust
surface for better adhesion of the top coat. • Prepares the surface for a uniform finish
• Interior/Exterior
Available Colors: White, Gray, Red Metal • Direct-to-metal
• Excellent adhesion
AC-11XX, AC-12XX, AC-13XX, AC-14XX: Rust Preventative Spray Paints are formulated to protect • Protects against rust
• Durable finish
against rust and resist weathering and fading.

AC-11XX: Available Colors: White, Black, Medium Green, Blue, Aluminum, Hunter Green, Machinery Gray,

Seal Brown, Almond, Light Blue, Pebble, Bronze, Fiesta Red, Shutter Burgundy, Hot Red, Reed, Charleston Green

AC-12XX: Available Colors: White, Black, Destination Bronze
AC-13XX: Available Colors: White, Black
AC-14XX: Available Colors: Safety Yellow, Safety Red, Safety Orange, Safety Purple, Safety Blue,

Safety Green

124 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net

Specialty Coatings

Insl-x® Freezer Kote

A high-gloss, rust-inhibiting coating designed for interior cold storage applications in
sub-freezing temperatures.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
FK-13XX Freezer Kote Time (± 2%) –
(Sq. Ft.) (Avg.)

24 hours 60.0 450-500 2.1 > 250 VOC

Product Description Features/Benefits
• Designed for application in extremely low temperatures (-40°F)
FK-13XX: Freezer Kote is a high-gloss, rust-inhibiting coating designed for application in sub-freezing • Eliminates cold storage shut down while painting
• Alcohol-based formula, dries quickly
temperatures. It is an alcohol-based formula that dries quickly. • High-gloss finish
Available Colors: White, Safety Yellow

Insl-x®

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 125
†For the most up-to-date MPI specifications, visit www.mpi.net

Notes

LENMAR®

® Homeowner Wood Finishes

Spar Varnish

A clear, transparent varnish with exceptional durability for use on wood and metal.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
1V.109 Spar Varnish Time (± 2%) –
(Sq. Ft.) (Avg.)

18 hours 57.0 400-500 1.7 > 250 VOC

Product Description Features/Benefits
• Screens out UV rays
1V.109: A clear, transparent varnish with exceptional durability for use on wood and metal. A special blend • Tough modified oil formula
• Durable finish retains gloss
of tough resins, flexible oil, and UV blockers makes this varnish a great choice for wood and other exterior
surfaces exposed to sun and weather.
Available Colors: Clear

Aqua-Plastic® Waterborne Urethane

A tough protective coating with easy soap and water clean-up and superior hang time.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
1WB.1400✦ Aqua-Plastic® WB Urethane - Gloss Time (± 2%) MPI 121, 130; Qualifies for LEED® 2009;
1WB.1410✦ Aqua-Plastic® WB Urethane - Semi-Gloss (Sq. Ft.) (Avg.) Health Product Declaration available
1WB.1427✦ Aqua-Plastic® WB Urethane - Satin MPI 121, 129; Qualifies for LEED® 2009
1WB.1420✦ Aqua-Plastic® WB Urethane - Dull 2-4 27.5 400-500 1 > 250 VOC MPI 121, 128; Qualifies for LEED® 2009
hours
MPI 121; Qualifies for LEED® 2009
2-4 27.5 400-500 1 > 250 VOC
hours

2-4 27.5 400-500 1 > 250 VOC
hours

2-4 27.5 400-500 1 > 250 VOC
hours

Product Description Features/Benefits
• Clear and non-yellowing finish
1WB.14XX: Once cured, these crystal clear finishes exhibit outstanding hardness, durability, abrasion • Tough acrylic polyurethane formula
• Easy clean-up
resistance, and gloss retention.
Available Colors: Clear
✦Product available in lower-VOC formulation.

128 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net

® Waterborne Wood Floor Finishes

ClearCoat PRO Waterborne Floor Finish

Formulated to provide superior durability and protection for hardwood floors.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
1PR.304 ClearCoat PRO - Satin Time (± 2%) –
1PR.306 ClearCoat PRO - Semi-Gloss (Sq. Ft.) (Avg.) –
1PR.309 ClearCoat PRO - Gloss –
4 hours 30.0 450-550 1.2 < 250 VOC

4 hours 30.0 450-550 1.2 < 250 VOC

4 hours 30.0 450-550 1.2 < 250 VOC

Product Description Features/Benefits

1PR.30X: A single-component urethane system that applies easily and quickly. The self-leveling • Quick-dry
• Single-component
formula dries to a smooth, even finish. Convenient soap and water clean-up makes Lenmar® ClearCoat PRO • Non-yellowing
an ideal choice.
Available Colors: Clear

ClearCoat PRO HT Waterborne Floor Finish

A single-component hardwood floor finishing system that is ideal for high-traffic residential
and commercial floors.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
1PR.504 ClearCoat PRO HT - Satin Time (± 2%) Eligible for LEED® v4 credit; Qualifies for CHPS
1PR.506 ClearCoat PRO HT - Semi-Gloss (Sq. Ft.) (Avg.) low emitting credit; CDPHv1 Emission certified
1PR.509 ClearCoat PRO HT - Gloss
4 hours 29.0 450-550 1.2 < 150 VOC

4 hours 29.0 450-550 1.2 < 150 VOC –

4 hours 29.0 450-550 1.2 < 150 VOC –

Product Description Features/Benefits Lenmar®
• For high-traffic areas
1PR.50X: A single-component floor finishing system that is ideal for high-traffic residential and commercial • Excellent flow and leveling
• Resists black heel marks
wood floors. It is formulated to provide a smooth, clear, and durable finish without the need of a catalyst.
Lenmar® ClearCoat PRO HT applies easily and dries quickly, allowing quick return to service.
Available Colors: Clear

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 129
†For the most up-to-date MPI specifications, visit www.mpi.net

® Waterborne Wood Floor Finishes

ClearCoat PRO XD Waterborne Floor Finish

A two-component hardwood floor finishing system designed for commercial and
residential applications.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
1PR.704 ClearCoat PRO XD - Satin Time (± 2%) –
(Sq. Ft.) (Avg.)

4 hours 29.0 450-550 1.2 < 150 VOC

1PR.706 ClearCoat PRO XD - Semi-Gloss 4 hours 29.0 450-550 1.2 < 150 VOC –

1PR.709 ClearCoat PRO XD - Gloss 4 hours 29.0 450-550 1.2 < 150 VOC –

1PR.7B ClearCoat PRO XD - Cross-Linker –– –– – –

Product Description Features/Benefits
• Extreme durability
1PR.70X: A two-component, non-yellowing floor coating system designed for commercial and residential • Cross-linked film for exceptional hardness
• Stands up to frequent cleaning
applications. It’s formulated to provide exceptional hardness, durability, and mar and scuff resistance. • For use with 1PR.7B catalyst
Lenmar® ClearCoat PRO XD maintains all the benefits of waterborne systems, including quick-dry formula,
easy application, and water clean-up.
Available Colors: Clear

ClearCoat PRO Waterborne Floor Sealer

Designed to provide excellent penetration into the wood fiber and great intercoat adhesion
with any of the Lenmar® ClearCoat PRO Waterborne Floor Finishes.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
1PR.100 ClearCoat PRO Sealer - Clear Time (± 2%) –
1PR.120 ClearCoat PRO Sealer - Amber (Sq. Ft.) (Avg.) –

3-4 27.0 450-550 1 > 250 VOC
hours

3-4 28.0 450 1 < 250 VOC
hours

Product Description Features/Benefits
• Minimizes grain raise
1PR.100, 1PR.120: Waterborne sealers designed to provide excellent penetration into the wood fiber • Prevents dark spots
• Single-component formula
and great intercoat adhesion with any of the Lenmar® ClearCoat PRO Waterborne Floor Finishes. In addition to
minimizing tannin bleed and grain raise, these single-component sealers provide a necessary build layer to
prevent the finish from penetrating while highlighting the wood’s natural color.

1PR.100: Available Colors: Clear
1PR.120: Available Colors: Amber

130 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net

® Interior Wood Floor Cleaning & Prep

Floor Cleaner

Designed to clean hardwood floors easily and without any film or residue left behind.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
1YB.321 Floor Cleaner Time (± 2%) –
(Sq. Ft.) (Avg.)

– 8.5 2000- – –
3000

Product Description Features/Benefits

1YB.321: Designed to clean hardwood floors easily and without any film or residue left behind. • Ready-to-use
• No residue or film
Available Colors: N/A • Zero-VOC

Degreaser Floor Cleaner

Powerful cleaner formulated to remove oil, dirt, and stubborn floor residue.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
1YB.311 Degreaser Floor Cleaner Time (± 2%) –
(Sq. Ft.) (Avg.)

– 14.5 1000- – < 250 VOC
2000

Product Description Features/Benefits
• Cleans tough floor dirt
1YB.311: Powerful cleaner formulated to remove oil, dirt, and stubborn floor residue. This degreasing and • Prepares hardwood floors for top coats

deep cleaning process is vital to obtaining good adhesion before top coating floors.
Available Colors: N/A

Lenmar®

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 131
†For the most up-to-date MPI specifications, visit www.mpi.net

® Interior Wood Flooring

Polyurethane Wood Floor Finish

Durable, self-leveling 100% polyurethane systems recommended for commercial, residential,
and gymnasium floor applications.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
1Y.555 Polyurethane Floor Finish - Gloss Time (± 2%) –
1Y.724 Polyurethane Floor Finish - Semi-Gloss (Sq. Ft.) (Avg.) –
1Y.617 Polyurethane Floor Finish - Satin –
1Y.915 Polyurethane Floor Finish - Dull Rubbed 12-24 37.5 450-500 1.3 > 250 VOC –
hours

12-24 37.5 450-500 1.3 > 250 VOC
hours

12-24 37.5 450-500 1.3 > 250 VOC
hours

12-24 37.5 450-500 1.3 > 250 VOC
hours

Product Description Features/Benefits
• Smooth, self-leveling finish with superior flow
1Y.555, 1Y.724, 1Y.617, 1Y.915: Oil-modified polyurethanes designed for the professional hardwood • High-solids for maximum film build
• Resists household chemicals, marring, and scuffing
floor refinisher for use in commercial and residential applications, as well as gyms.
Available Colors: Clear

350-VOC Polyurethane Wood Floor Finish

Oil-modified, self-leveling polyurethane formulas that provide excellent durability for
the professional hardwood floor finisher.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
Time (± 2%) MPI 56
(Sq. Ft.) (Avg.) –
MPI 57
1Y.359 350-VOC Polyurethane Floor Finish - Gloss 12 hours 50.0 400-550 1.8 > 250 VOC

1Y.356 350-VOC Polyurethane Floor Finish - 12 hours 50.0 400-550 1.8 > 250 VOC
Semi-Gloss

1Y.354 350-VOC Polyurethane Floor Finish - Satin 12 hours 50.0 400-550 1.8 > 250 VOC

Product Description Features/Benefits
• Excellent flow for a smooth final appearance
1Y.35X: These 350-VOC, oil-modified polyurethanes are for the professional hardwood floor refinisher. • High-solids for increased durability
• Resists household chemicals, marring, and scuffing
Benefits include superior flow-out for a smooth self-leveling finish and an exceptional amount of solids for
maximum build.
Available Colors: Clear

132 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net

® Interior Wood Flooring

Court Time Gym Floor Finish

A superior quality system designed specifically for application to sports floors.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
1Y.809 Court Time Gym Floor Finish - Gloss Time (± 2%) –
(Sq. Ft.) (Avg.)

12-24 42.0 450-500 1.3 > 250 VOC
hours

Product Description Features/Benefits
• Ready-to-use formula
1Y.809: Designed specifically for application to sports floors, this product will form an extremely tough, • Tough, durable film resists routine cleaning and perspiration
• Fast recoat time for quick return to service
high-build gloss finish. This high-quality, polyurethane formula is ready-to-use and self-leveling. Although
specially formulated for sports courts, Court Time is also recommended for commercial, residential, and
institutional applications.
Available Colors: Clear

Rapid Seal Dual-Purpose Sealer

A 100% oil-modified sealer that applies easily with a variety of applicators, achieves excellent
adhesion to properly prepared substrates, and works great under Lenmar’s polyurethane
and waterborne floor finishes.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
1Y.519 Rapid Seal Dual-Purpose Sealer Time (± 2%) –
(Sq. Ft.) (Avg.)

2-3 30.0 600-700 1.1 > 250 VOC
hours

Product Description Features/Benefits
• Use under both solvent and waterborne floor finishes
1Y.519: An oil-modified sealer that dries to buff in 2-3 hours. This product is designed to work great under • Resin-solvent combination
• Sands easily
Lenmar® waterborne and polyurethane floor finishes. This sanding sealer allows the finisher to achieve the • Fast-drying
look of an oil-based finish with the speed of a waterborne. Rapid Seal achieves excellent adhesion to properly • Eliminates grain raise
prepared substrates, applies with a variety of applicators, flows well, self-levels, and sands easily.
Available Colors: Clear

Lenmar®

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 133
†For the most up-to-date MPI specifications, visit www.mpi.net

® Interior Wood Flooring

Moisture Cure Urethane

A tough, abrasion-resistant finish with a slightly amber cast that is impervious to household
chemicals, and withstands marring and scuffing once cured.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
1T.992 Moisture Cure Urethane - High Gloss Time –
6-8 (± 2%) (Sq. Ft.) (Avg.)
hours
32.0 513-525 0.8 > 250 VOC

Product Description Features/Benefits
• Tough, abrasion-resistant film
1T.992: A tough, abrasion-resistant, high-gloss finish with a slightly amber cast. It is impervious to • Impervious to household chemicals
• Uses moisture in the air to cure and cross-link
household chemicals, and withstands marring and scuffing when fully cured. It is ideal for high-traffic
commercial and residential floors where maximum performance and durability is desired.
Available Colors: Clear

134 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net

® Clear Conversion Varnishes

MegaVar® Plus High Solids Water White
Conversion Varnish

Designed for the professional woodworker who demands maximum performance in a
high-build clear finish.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
Time (± 2%) –
(Sq. Ft.) (Avg.) –
–
1M.6309 MegaVar® High Solids WW Conv. Varn. - Gloss 30-45 42.0 673-700 1.7 > 250 VOC –
mins. –

1M.6306 MegaVar® High Solids WW Conv. Varn. - 30-45 42.0 673-700 1.7 > 250 VOC
Semi-Gloss mins.

1M.6304 MegaVar® High Solids WW Conv. Varn. - Satin 30-45 42.0 673-700 1.7 > 250 VOC
mins.

1M.6302 MegaVar® High Solids WW Conv. Varn. - 30-45 42.0 673-700 1.7 > 250 VOC
Dull Rubbed mins.

1M.6301 MegaVar® High Solids WW Conv. Varn. - Flat 30-45 42.0 673-700 1.7 > 250 VOC
mins.

Product Description Features/Benefits
• Self-sealing with high-clarity finish
1M.630X: Once catalyzed, these fast-drying, non-yellowing conversion varnishes offer superior protection • Long-lasting durability, protection against moisture and chemicals
• Non-yellowing and fast-drying
against moisture and household chemicals. The high-solids formula builds to a beautiful and exceptionally • VOC- and HAPS-compliant
durable film that will fully cure within 2-3 days after the final coat. These varnishes require the addition of
1A.622 catalyst (see TDS for details) and are recommended as self-sealing finishes over properly prepared
interior wood surfaces.
Available Colors: Clear

Lenmar®

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 135
†For the most up-to-date MPI specifications, visit www.mpi.net

® Clear Conversion Varnishes

MegaVar® Water White Conversion Varnish

Designed for the professional woodworker who demands maximum performance in a clear finish.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
1M.4309 MegaVar® WW Conv. Varn. - Gloss Time –
1M.4306 MegaVar® WW Conv. Varn. - Semi-Gloss 30-60 (± 2%) (Sq. Ft.) (Avg.) –
1M.4304 MegaVar® WW Conv. Varn. - Satin mins. –
1M.4302 MegaVar® WW Conv. Varn. - Dull Rubbed 32.0 513-525 1.3 > 250 VOC –
1M.4301 MegaVar® WW Conv. Varn. - Flat –
30-60 32.0 513-525 1.3 > 250 VOC
mins.

30-60 32.0 513-525 1.3 > 250 VOC
mins.

30-60 32.0 513-525 1.3 > 250 VOC
mins.

30-60 32.0 513-525 1.3 > 250 VOC
mins.

Product Description Features/Benefits
• Self-sealing, long-lasting finish
1M.430X: Once catalyzed, these fast-drying, non-yellowing conversion varnishes offer superior • Protects against moisture and chemicals
• Non-yellowing and fast-drying
protection against moisture and household chemicals. The formula builds to a beautiful and exceptionally • Maximum performance in a water white clear
durable film that will fully cure within 2-5 days after the final coat. These varnishes require the addition
of 1A.622 catalyst (see TDS for details) and are recommended as self-sealing finishes over properly
prepared interior wood surfaces.
Available Colors: Clear

136 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net

® Clear Conversion Varnishes

MegaVar® Water White Conversion Varnish
Catalyzed Vinyl Sealer

A versatile, non-yellowing sanding sealer for the professional woodworker.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
1C.5300 MegaVar® WW Conv. Varn. Vinyl Sealer Time > 250 VOC –
30-35 (± 2%) (Sq. Ft.) (Avg.)
mins.
28.0 320-535 1.1

Product Description Features/Benefits
• Excellent chemical and moisture resistance
1C.5300: A versatile, non-yellowing sanding sealer that offers numerous benefits for the professional • Resists cold checking
• Ready-to-spray viscosity
woodworker. Once catalyzed, this fast-drying sealer offers an exceptional amount of solids for initial build, • Two-component product
seals and fills most porous wood species in a single coat, and sands easily. The high-solids content helps lock
in and protect stained wood from being marred when scuff sanding. This sealer also offers strong resistance
to cold checking and safeguards against cracking.
Available Colors: Clear

Lenmar®

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 137
†For the most up-to-date MPI specifications, visit www.mpi.net

® Clear Precatalyzed Lacquers

UltraMax® Plus Water White Precatalyzed Lacquer

High-solids, water white precatalyzed nitrocellulose lacquers designed for professional woodworkers
who demand performance with the flexibility to post catalyze in a ready-to-spray finish.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
1D.359 UltraMax® Plus WW Precat - Gloss Time (± 2%) –
1D.356 UltraMax® Plus WW Precat - Semi-Gloss (Sq. Ft.) (Avg.) –
1D.354 UltraMax® Plus WW Precat - Satin –
1D.352 UltraMax® Plus WW Precat - Dull Rubbed 30 mins. 25.0 400-425 1 > 250 VOC –
1D.351 UltraMax® Plus WW Precat - Flat –
30 mins. 25.0 400-425 1 > 250 VOC

30 mins. 25.0 400-425 1 > 250 VOC

30 mins. 25.0 400-425 1 > 250 VOC

30 mins. 25.0 400-425 1 > 250 VOC

Product Description Features/Benefits
• 12-month shelf-stable precatalyzed formula
1D.35X: These products are formulated to be shelf-stable precatalyzed systems with 12 months of shelf life. • Ready-to-use with no mixing
• Durability of a catalyzed finish
Use directly on properly prepared wood substrates as a 3-coat self-sealing system, or if a sealer is desired, use
UltraLaq® Precatalyzed Water White Vinyl Sanding Sealer (1C.370), or UltraLaq® Precatalyzed Quick Dry Water
White Vinyl Sanding Sealer (1C.380) for the first coat.
Available Colors: Clear

138 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net

® Clear Precatalyzed Lacquers

UltraLaq® Water White Precatalyzed Lacquer

Precatalyzed nitrocellulose clear lacquers designed for the professional woodworkers who
demand maximum performance in a high-solids, self-sealing, and ready-to-spray finish.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
1D.339 UltraLaq® WW Precat - Gloss Time > 250 VOC –
1D.336 UltraLaq® WW Precat - Semi-Gloss 30-45 (± 2%) (Sq. Ft.) (Avg.) –
1D.334 UltraLaq® WW Precat - Satin mins. –
1D.332 UltraLaq® WW Precat - Dull Rubbed 21.0 337-350 0.8 –
1D.331 UltraLaq® WW Precat - Flat –
30-45 21.0 337-350 0.8 > 250 VOC
mins.

30-45 21.0 337-350 0.8 > 250 VOC
mins.

30-45 21.0 337-350 0.8 > 250 VOC
mins.

30-45 21.0 337-350 0.8 > 250 VOC
mins.

Product Description Features/Benefits
• 12-month shelf-stable precatalyzed formula
1D.33X: These products are formulated to be used as a shelf-stable precat with 12 months of shelf life. • Ready-to-use with no mixing
• Durability of a catalyzed finish
Use directly on properly prepared wood as a 3-coat self-sealing system. If a sealer is desired, use UltraLaq®
Water White Vinyl Sanding Sealer (1C.360), UltraLaq® Precatalyzed Water White Vinyl Sanding Sealer (1C.370),
or UltraLaq® Precatalyzed Quick Dry Water White Vinyl Sanding Sealer (1C.380) for the first coat.
Available Colors: Clear

Lenmar®

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 139
†For the most up-to-date MPI specifications, visit www.mpi.net

® Clear Precatalyzed Lacquers

UltraMax® 550-VOC Water White Precatalyzed Lacquer

Designed for professional woodworkers who demand maximum performance in a
high-solids formula.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
1D.459 UltraMax® 550-VOC WW Precat - Gloss Time (± 2%) –
1D.456 UltraMax® 550-VOC WW Precat - Semi-Gloss (Sq. Ft.) (Avg.) –
1D.454 UltraMax® 550-VOC WW Precat - Satin –
1D.452 UltraMax® 550-VOC WW Precat - Dull Rubbed 30-45 24.0 370-400 1 > 250 VOC –
1D.451 UltraMax® 550-VOC WW Precat - Flat mins. –

30-45 24.0 370-400 1 > 250 VOC
mins.

30-45 24.0 370-400 1 > 250 VOC
mins.

30-45 24.0 370-400 1 > 250 VOC
mins.

30-45 24.0 370-400 1 > 250 VOC
mins.

Product Description Features/Benefits
• Ready-to-spray viscosity
1D.45X: Precatalyzed nitrocellulose lacquers designed for professional woodworkers who demand • Precatalyzed, self-sealing
• Resists moisture and chemicals
maximum performance in a high-solids, ready-to-spray finish. These products are formulated to be
used as a shelf-stable precat with 12 months of shelf life. Use the 1D.45X series directly on properly
prepared wood as a 3-coat self-sealing system.
Available Colors: Clear

140 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net

® Clear Precatalyzed Lacquers

UltraLaq® Sealers

A barrier against moisture that helps control the appearance of unwanted fisheyes.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
Time (± 2%) –
(Sq. Ft.) (Avg.) –
–
1C.360 UltraLaq® WW Vinyl Sanding Sealer 30-40 14.0 225-250 0.6 > 250 VOC
mins.

1C.370 UltraLaq® Precat WW Vinyl Sanding Sealer 30-40 16.0 256-275 0.7 > 250 VOC
mins.

1C.380 UltraLaq® Precat Quick Dry WW Vinyl 30 mins. 20.0 321-325 0.8 > 250 VOC
Sanding Sealer

Product Description Features/Benefits
• Optimal flow and fast-dry
1C.360: A high-performance, clear water white vinyl modified sealer. This sealer serves as a barrier against • Resists cold checking
• High-solids
moisture with excellent penetration, adhesion, and fast-dry in a ready-to-spray viscosity.
Available Colors: Clear • Delivers high-build and depth of finish
• Fast-drying and sands easily
1C.370, 1C.380: These sealers will serve as barriers against moisture, and provide a higher level of • Ready-to-spray formula

protection against the possible existence of imbedded surface contaminants by helping to control the
appearance of unwanted fisheyes. Additional benefits include excellent penetration and adhesion into
properly prepared interior wood surfaces, fast-drying, water white clarity, and a ready-to-spray viscosity.
Available Colors: Clear

Lenmar®

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 141
†For the most up-to-date MPI specifications, visit www.mpi.net

® Pigmented Conversion Varnishes

MegaVar® White Conversion Varnish

Designed for the woodworker who demands maximum performance in a solid pigmented finish.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
1S.758 MegaVar® White Conv. Varn. - Gloss Time –
1S.756 MegaVar® White Conv. Varn. - Semi-Gloss 45-60 (± 2%) (Sq. Ft.) (Avg.) –
1S.754 MegaVar® White Conv. Varn. - Satin mins. –
1S.752 MegaVar® White Conv. Varn. - Dull Rubbed 32.0 513-525 1.3 > 250 VOC –
1S.750 MegaVar® White Conv. Varn. Undercoater –
45-60 32.0 513-525 1.3 > 250 VOC
mins.

45-60 32.0 513-525 1.3 > 250 VOC
mins.

45-60 32.0 513-525 1.3 > 250 VOC
mins.

30-45 40.0 641-650 2 > 250 VOC
mins.

Product Description Features/Benefits
• Self-sealing
1S.75X: Once catalyzed, these fast-drying varnishes offer superior protection against moisture and • Protects against moisture and chemicals
• Non-yellowing
household chemicals. The high-solids formula builds to a beautiful and exceptionally durable film • Fast-drying
when fully cured. The high-solids content makes it possible to achieve a desired end result with just • VOC- and HAPS-compliant
a few coats. These conversion varnishes require the addition of 1A.622 catalyst (see TDS for details). • High-solids for fewer coats
Available Colors: White • High-solids content
• Resists moisture and chemicals
1S.750: Once catalyzed, this fast-drying, VOC- and HAPS-compliant undercoater offers superior • Tintable with industrial colorants

protection against moisture and household chemicals. The high-solids formula builds to a beautiful
and exceptionally durable film once cured. This conversion undercoater requires the addition of
1A.622 catalyst (see TDS for details).
Available Colors: White

142 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net

® Pigmented Precatalyzed Lacquers

UltraLaq® White Precatalyzed Lacquer

Designed for professional woodworkers who demand top-quality performance and durability
in a lacquer finish.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
1M.808 UltraLaq® White Precat - Gloss Time > 250 VOC –
1M.806 UltraLaq® White Precat - Semi-Gloss 30-45 (± 2%) (Sq. Ft.) (Avg.) –
1M.804 UltraLaq® White Precat - Satin mins. –
1M.802 UltraLaq® White Precat - Dull Rubbed 25.0 401-425 1.1 –
1C.800 UltraLaq® White Precat Undercoater –
30-45 25.0 401-425 1.1 > 250 VOC
mins.

30-45 25.0 401-425 1.1 > 250 VOC
mins.

30-45 25.0 401-425 1.1 > 250 VOC
mins.

30 mins. 26.5 385-400 1 > 250 VOC

Product Description Features/Benefits

1M.80X: These white precat lacquers offer superior resistance to moisture, an exceptional amount of • 12-month shelf-stable precatalyzed formula
• Ready-to-use with no mixing
solids for hiding, and resistance to cold checking. No reduction is required but depending on the type of • Durability of a catalyzed finish
spray equipment used, reduction with Lenmar® 1A.406 lacquer thinner might be necessary to achieve good • Easy sanding formula
atomization. These should be used in conjunction with UltraLaq® White Precatalyzed Undercoater (1C.800)
or another approved Lenmar® undercoater.

Available Colors: White

1C.800: UltraLaq® White Precatalyzed Undercoater is designed to serve as a comprehensive undercoater • 12-month shelf-stable precatalyzed formula
• Formulated for easy sanding and quick finishing
for use on cabinets and all fine wood finishing. The high-solid content offers excellent adhesion and sands • Good base coat for premium finish systems
easily to provide an ideal foundation for the UltraLaq® 1M.80X series. Additional benefits include ready-to-spray • Resists moisture and chemicals
viscosity, fast-drying properties, and chemical and moisture resistance.

Available Colors: White

Lenmar®

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 143
†For the most up-to-date MPI specifications, visit www.mpi.net

® CAB Acrylic Finishes

Ultra UniLaq® CAB Acrylic Clear Lacquer

Unique cellulose acetate butyrate (CAB) lacquers designed for woodworkers who
demand ultimate clarity found only in a true non-yellowing solvent-borne lacquer.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
1M.979 Ultra UniLaq® CAB Acrylic Clear - Gloss Time > 250 VOC –
1M.976 Ultra UniLaq® CAB Acrylic Clear - Semi-Gloss 30-45 (± 2%) (Sq. Ft.) (Avg.) –
1M.974 Ultra UniLaq® CAB Acrylic Clear - Satin mins. –
1M.972 Ultra UniLaq® CAB Acrylic Clear - Dull Rubbed 19.0 305-325 0.8 –

30-45 19.0 305-325 0.8 > 250 VOC
mins.

30-45 19.0 305-325 0.8 > 250 VOC
mins.

30-45 19.0 305-325 0.8 > 250 VOC
mins.

Product Description Features/Benefits
• Formulated for clarity, flexibility, adhesion, and build
1M.97X: Ultra UniLaq® products are unlike traditional nitrocellulose lacquers in performance. They offer • High-solids for superior depth of finish
• Ready-to-spray
resistance to moisture and exceptional solids content in a ready-to-spray viscosity. These fast-drying acetate • Resists moisture
butyrate lacquers provide a durable finish that resists cold checking and remains crystal clear over time. These • Self-sealing
products are ideal over pickled white stains, natural finishes, or white systems.
Available Colors: Clear

144 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net

® CAB Acrylic Finishes

Ultra UniLaq® CAB Acrylic White Lacquer

Cellulose Acetate Butyrate (CAB) lacquers designed for woodworkers who demand the ultimate
quality found only in a true high-hiding, non-yellowing solvent-borne acrylic product.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
1M.969 Ultra UniLaq® CAB Acrylic White - Gloss Time (± 2%) –
1M.966 (Sq. Ft.) (Avg.) –
1M.964 –
1M.962 30-45 22.0 353-375 0.9 > 250 VOC –
mins.

Ultra UniLaq® CAB Acrylic White - Semi-Gloss 30-45 22.0 353-375 0.9 > 250 VOC
mins.

Ultra UniLaq® CAB Acrylic White - Satin 30-45 22.0 353-375 0.9 > 250 VOC
mins.

Ultra UniLaq® CAB Acrylic White - Dull Rubbed 30-45 22.0 353-375 0.9 > 250 VOC
mins.

Product Description Features/Benefits
• Formulated for hiding, flexibility, adhesion, and build
1M.96X: Ultra UniLaq® products are unlike traditional nitrocellulose lacquers in performance. They offer • High-solids for superior depth of finish
• Ready-to-spray
resistance to moisture and exceptional solids content in a ready-to-spray viscosity. These fast-drying acetate • Resists moisture
butyrate lacquers provide a durable finish that resists cold checking and will not yellow over time. These
products are ideal over pickled white stains, natural finishes, or white systems.
Available Colors: White

Lenmar®

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 145
†For the most up-to-date MPI specifications, visit www.mpi.net

® CAB Acrylic Finishes

Ultra UniLaq® CAB Acrylic Sealers and Undercoaters

Cellulose Acetate Butyrate (CAB) lacquers designed for woodworkers who demand the
ultimate in quality finishes.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
1C.475 Ultra UniLaq® CAB Acrylic Clear Sanding Sealer Time > 250 VOC –
1C.900 30-60 (± 2%) (Sq. Ft.) (Avg.) –
mins.
12.0 192-200 0.5

Ultra UniLaq® CAB Acrylic White Undercoater 30-60 26.0 417-425 1.1 > 250 VOC
mins.

Product Description Features/Benefits
• Designed as a penetrating sealer for hardwoods
1C.475: Ultra UniLaq® Cellulose Acetate Butyrate (CAB) Acrylic Clear Sanding Sealer is designed as a • Low-solids content offers excellent adhesion
• Recommended over pickle, white, and pastel stains
penetrating sealer into hard, closed-grain species of wood. The low-solids content offers excellent adhesion • Ready-to-spray viscosity
and sands easily.
Available Colors: Clear • Excellent adhesion and sanding
• Non-yellowing
1C.900: Designed to serve as a comprehensive undercoater for use on cabinets and all fine wood finishing. • Ready-to-spray formula

The high-solid content offers excellent adhesion and sands easily to provide an ideal foundation for the
Ultra UniLaq® 1M.96X series top coats. Additional benefits include ready-to-spray viscosity, fast-drying
properties, and non-yellowing formulation.
Available Colors: White

146 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net

® Nitrocellulose Lacquers

DuraLaq® Nitrocellulose Water White Lacquer

High-performance, ready-to-spray, water white nitrocellulose lacquers designed for
interior wood surfaces that require the highest quality lacquer system.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
1LL.210 DuraLaq® WW Lacquer - Gloss Time (± 2%) –
1LL.216 DuraLaq® WW Lacquer - Semi-Gloss (Sq. Ft.) (Avg.) –
1LL.214 DuraLaq® WW Lacquer - Satin –
1LL.212 DuraLaq® WW Lacquer - Dull Rubbed 45-60 18.0 290-300 1 > 250 VOC –
1LL.211 DuraLaq® WW Lacquer - Flat mins. –

45-60 17.3 290-300 1 > 250 VOC
mins.

45-60 18.0 290-300 1 > 250 VOC
mins.

45-60 18.0 290-300 1 > 250 VOC
mins.

45-60 18.0 290-300 1 > 250 VOC
mins.

Product Description Features/Benefits
• High-build for superior flow, leveling, and spray characteristics
1LL.21X: DuraLaq® Nitrocellulose Water White Lacquers are high-performing, ready-to-spray water white • Fast-drying
• Ready-to-spray viscosity saves time and assures consistent performance
nitrocellulose lacquers. The primary benefits include an exceptional amount of solids for build and fast-drying.
The ready-to-spray viscosity saves time and ensures job-to-job consistency and performance. Once dry, these
finishes will resist cold checking for lasting durability.
Available Colors: Clear

Lenmar®

Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection. 147
†For the most up-to-date MPI specifications, visit www.mpi.net

® Nitrocellulose Lacquers

DuraLaq® Nitrocellulose Sanding Sealers

High-performance, ready-to-spray, water white nitrocellulose sealers designed for
interior wood surfaces that require the highest quality lacquer system.

Code Product Recoat Vol. Sol. Cov. DFT mils VOC Range Specifications†
1C.397 DuraLaq® High Solids WW Sanding Sealer Time (± 2%) –
1C.423 DuraLaq® High Build WW Sanding Sealer (Sq. Ft.) (Avg.) –
1C.203 DuraLaq® WW Sanding Sealer –
30 mins. 20.0 321-325 0.8 > 250 VOC

30-60 17.0 272-300 0.7 > 250 VOC
mins.

30 mins. 14.0 225-250 0.5 > 250 VOC

Product Description Features/Benefits

1C.397: A ready-to-spray sealer with an exceptional amount of solids for initial build and sealing, • Formulated for flexibility, sandability, adhesion, and build
• Provides optimal flow while maintaining fast-dry
and superior sanding properties. High-quality resins give this sealer the ability to penetrate and bond • Ideal when high-build and depth of finish are required
with the profile of properly prepared interior wood surfaces.

Available Colors: Clear

1C.423: A ready-to-spray, water white nitrocellulose high-solids sealer designed for interior wood • Exceptional solids for build and sealing
• Superior sanding properties
applications only. It offers high clarity, ease of application, ease of repair, and excellent flow/leveling • Penetrates and bonds with the profile of the wood
characteristics.

Available Colors: Clear

1C.203: A ready-to-spray, water white nitrocellulose sanding sealer designed for interior wood applications • Superior clarity
• Easy-to-apply
only. When properly applied, it offers good initial build and excellent adhesion. This product sands easily and • Excellent flow and leveling
powders nicely to provide a smooth sealed foundation for subsequent coats. This sealer is compatible with any • Easy-to-repair
Lenmar® nitrocellulose lacquer top coat.

Available Colors: Clear

148 Please note that not all Benjamin Moore & Co. products are available in all areas due to VOC regulations. Please check with your local retailer before making your selection.
†For the most up-to-date MPI specifications, visit www.mpi.net