QHDC Blickle Australia 2019

CASTORWHEELS

RUBBER TREAD

The rubbers used in making the tyres for our castor wheels include Thermoplastic elastomer
(TPE) and hi-res blue rubber. Rubbers, as the name suggests, are softer bouncier materials
that incorporate additives and properties to improve wear, reduce flat spotting and make
them non-marking. Softer tyred wheels are quiet rolling over rough and uneven surfaces,
however their ability to carry heavier loads is reduced somewhat according to the hardness
and resilience.

TPP

THERMOPLASTIC ELASTOMER
TPE tyres with plain bore normally only used for lighter loads that are moved less often over short
distances.

TPB / TPSB

THERMOPLASTIC ELASTOMER
TPE tyres combined with precision ball bearings (including stainless steel options) for lighter
applications where loads are moved frequently and over longer distances. The 125 x 32mm
wheel is most commonly used on shopping trolleys which can travel up to 1,500 km per year.

BPB

BLUE RUBBER
A bouncy high resilience rubber compound that is quiet, impact absorbing and non-marking that
also returns some of the energy (bounce) that help lower the rolling resistance when loaded to its
correct capacity.

BP BLUE HI RES TREAD, POLYPROPYLENE CENTRE

WHEEL TREAD WHEEL CODE MAX LOAD BORE BORE HUB BEARING TYPE AXLE CASTOR SERIES
DIAMETER WIDTH (KG) DIAMETER DIAMETER LENGTH SPACER TYPE
(mm) (mm) (no spacer mm) (spacer mm)
(mm)

75 32 BP07532B 80 8 N/A 38 PRECISION BEARINGS NILL M
12 SLEEVE D
80 35 BP08035R 100 8 10 40 ROLLER M
12 NILL D
100 32 BP10032B 100 17 N/A 38 SLEEVE H, S
8 SLEEVE M
100 36 BP10036B(F) 150 12 10 40 PRECISION BEARINGS D
17 NILL H, S
100 50 BP10050B 150 20 1/2" 60 SLEEVE H, S
20 SLEEVE H, S
125 32 BP12532B 110 N/A 38 TOP HAT
TOP HAT
125 36 BP12536B(F) 160 10 40 PRECISION BEARINGS

125 50 BP12550B 200 1/2" 60

150 50 BP15050B(20) 250 12 60 PRECISION BEARINGS

200 50 BP20050B(20) 300 12 60 PRECISION BEARINGS

l 47 l

FOR LIGHT, MEDIUM
AND HEAVY DUTY
CASTORS ONLY
FOR PREMIUM WHEELS REFER TO PAGE 73

TP THERMOPLASTIC ELASTOMER TREAD, POLYPROPYLENE CENTRE LIGHT

WHEEL TREAD WHEEL CODE MAX BORE BORE HUB BEARING TYPE AXLE CASTOR
DIAMETER WIDTH LOAD DIAMETER DIAMETER LENGTH SPACER TYPE SERIES
(mm) (KG) (no spacer (spacer mm)
(mm) (mm)
mm)
MEDIUM

50 20 TP05020P 40 6 N/A 20 PLAIN BORE N/A L
N/A K
75 25 TP07525B 40 8 N/A 30 PRECISION BEARINGS N/A M HEAVY
N/A MS
75 32 TP07532B 80 8 N/A 38 PRECISION BEARINGS N/A K
N/A M
75 32 TP07532SB 80 8 N/A 38 STAINLESS STEEL PRECISION BEARINGS N/A MS
N/A S, H, HS
100 25 TP10025B 50 8 N/A 30 PRECISION BEARINGS N/A M WHEELS
N/A MS
100 32 TP10032B 100 8 N/A 38 PRECISION BEARINGS N/A S, H, HS
N/A M
100 32 TP10032SB 100 8 N/A 38 STAINLESS STEEL PRECISION BEARINGS N/A MS
N/A H, HS, S
100 50 TP10050B 250 12.7 N/A 60 QUAD-PLUS PRECISION BEARINGS N/A H, HS, S
N/A M
125 32 TP12532B 110 8 1/2” 38 PRECISION BEARINGS N/A H, LE
1/2” H, LE
125 32 TP12532SB 110 8 38 STAINLESS STEEL PRECISION BEARINGS N/A

125 50 TP12550B 300 12.7 60 QUAD-PLUS PRECISION BEARINGS N/A

150 32 TP15032B 150 8 38 PRECISION BEARINGS N/A

150 32 TP15032SB 150 8 38 STAINLESS STEEL PRECISION BEARINGS N/A

150 50 TP15050B 350 12.7 60 QUAD-PLUS PRECISION BEARINGS N/A

200 50 TP20050B 400 12.7 60 QUAD-PLUS PRECISION BEARINGS N/A

200 32 TP20032B 150 8 40 PRECISION BEARINGS N/A

200 50 VPP200/20R 205 20 60 ROLLER BEARING SLEEVE

200 50 VPP200/20R-SG 205 20 60 ROLLER BEARING SLEEVE

l 48 l

CASTORWHEELS

POLYURETHANE UPB / UPSB

Thermoplastic polyurethane used in our wheel range is injection molded STANDARD URETHANE
on to both polypropylene and nylon centres. PU is a resilient material that These wheels have flat and semi-round profile treads, and all come with
is highly abrasion resistant, non-marking, shock absorbing and won’t flat precision or precision stainless steel bearings. Please note however, our
spot. It is mostly resistant to petroleum based chemicals, some acids and S and H Series Castor wheels incorporate a North American Quad-Plus
water. The key feature of PU is its ability to absorb impacts, resist wear, bearing system that includes 2 x precision ball bearings and 2 acetal journal
cutting, tearing and flat spotting bearings. These bearings are maintenance free for the life of the wheel. For
the patented Quad-Plus bearing system, please see page 41 for more details
and cut-away drawings .

UPRB

ROUND PROFILE URETHANE
Only available in 150mm size in H & S series heavy duty).The round profile
tyres produces an oval footprint that reduces friction and combined with
precision bearings makes it easier to roll and manoeuvre when heavily
loaded.

ALTH UPB UPRB UENR

ELASTIC URETHANE
Elastic polyurethane has higher resilience and therefore absorbs impacts and
rolls more easily over obstacles. Combined with a roller bearing for smooth,
quiet performance.

UCNR

CUSHION URETHANE
Cushion polyurethane – specifically designed for use on road and flight cases
and to move delicate electronic equipment. Incorporates needle roller bearing
for easy rolling.

UCIR

PU ON CI
Economic polyurethane on cast iron centre with roller bearing.

UENR UCNR UCIR ALTH

UEN ELASTIC URETHANE, NYLON CENTRE EXTRATHANE POLYURETHANE TREAD
Made of high-quality polyurethane-elastomer Blickle Extrathane ®.Wheel
centre made of die-cast aluminum. Casted tread.

WHEEL TREAD WHEEL CODE MAX LOAD BORE BORE HUB LENGTH BEARING TYPE AXLE CASTOR SERIES
DIAMETER WIDTH (KG) DIAMETER DIAMETER (mm) SPACER TYPE
(mm) (no spacer mm) (spacer mm)
(mm)

100 35 UEN10035R 220 12 8 45 ROLLER SLEEVE J
12 8 45 SS ROLLER SLEEVE JS
100 35 UEN10035SR 220 15 10 60 SLEEVE J
15 10 38 ROLLER SLEEVE JS
125 35 UEN12540R 300 SS ROLLER
BORE HUB LENGTH
125 35 UEN12540SR 300 DIAMETER (mm) BEARING TYPE
(spacer mm)
ALTH EXTRATHANE POLYURETHANE TREAD

WHEEL TREAD WHEEL CODE MAX LOAD BORE AXLE CASTOR SERIES
DIAMETER WIDTH (KG) DIAMETER SPACER TYPE
(mm) (no spacer mm)
(mm)

150 50 ALTH150/20K 500 20 12 60 PRECISION BEARING TOP HATS H
200 50 ALTH200/20K 800 20
l 49 l 12 60 PRECISION BEARING TOP HATS H

UP URETHANE, POLYPROPYLENE CENTRE FOR LIGHT, MEDIUM
AND HEAVY DUTY
CASTORS ONLY
FOR PREMIUM WHEELS REFER TO PAGE 73

WHEEL TREAD WHEEL CODE MAX LOAD BORE BORE HUB BEARING TYPE AXLE CASTOR SERIES LIGHT
DIAMETER WIDTH (KG) DIAMETER DIAMETER LENGTH SPACER TYPE
(mm) (mm) (no spacer mm)
(spacer (mm)
mm)

75 32 UP07532B 80 8 N/A 38 PRECISION BEARINGS NILL M MEDIUM
75 32 UP07532SB 80 8 N/A MS
100 32 UP10032B 100 8 N/A 38 SS PRECISION BEARINGS NILL M
100 32 UP10032SB 100 8 N/A MS
100 50 UP10050B 350 1/2" 1/2" 38 PRECISION BEARINGS NILL H, HS, S
125 32 UP12532B 110 8 N/A M
125 32 UP12532SB 110 8 N/A 38 SS PRECISION BEARINGS NILL MS HEAVY
125 50 UP12550B 400 1/2” 1/2" H, HS, S
150 32 UP15032B 125 8 N/A 60 QUAD-PLUS PRECISION BEARINGS NILL M
150 32 UP15032SB 150 8 N/A MS
150 50 UP15050B 500 1/2” 1/2" 38 PRECISION BEARINGS NILL H, HS, S
150 50 UPR15050B 450 17 1/2" H, S
200 50 UP20050B 550 1/2” 1/2" 38 SS PRECISION NILL H, HS, S WHEELS
200 50 UPR20050B 450 17 1/2” M
60 QUAD-PLUS PRECISION BEARINGS NILL

38 PRECISION BEARINGS NILL

38 SS PRECISION N/A

60 QUAD-PLUS PRECISION BEARINGS NILL

60 PRECISION BEARINGS TOP HATS

60 QUAD-PLUS PRECISION BEARINGS NILL

60 PRECISION BEARINGS TOP HATS

UCN CUSHION URETHANE TREAD, NYLON CENTRE

WHEEL TREAD WHEEL CODE MAX LOAD BORE BORE HUB BEARING TYPE AXLE CASTOR SERIES
DIAMETER WIDTH (KG) DIAMETER DIAMETER LENGTH SPACER TYPE
(mm) (mm) (no spacer mm) (spacer mm)
(mm)

100 35 UCN10035R 180 12 8 45 ROLLER SLEEVE J
125 40 UCN12540R 210 15 10 45 SS ROLLER SLEEVE J

UCIR POLYURETHANE TREAD, CAST IRON CENTRE BEARING TYPE

WHEEL TREAD WHEEL CODE MAX LOAD BORE BORE HUB AXLE CASTOR SERIES
DIAMETER WIDTH (KG) DIAMETER DIAMETER LENGTH SPACER TYPE
(mm) (mm) (no spacer mm) (spacer mm)
(mm)

150 50 UCI15050R 560 20 1/2" 60 ROLLER BEARING SLEEVE H
l 50 l

CASTORWHEELS

NYLON 6

Nylon 6 is a structural plastic that is injection molded to form different wheel sizes and
shapes. Because it is a hard material it has a low rolling resistance (low push effort)
however it does not absorb impact so it is noisier over rough surfaces.
Nylon generally has good chemical resistance to petroleum-based chemicals, cleaners and
some acids. Being hydroscopic it is not ideal for water immersion and low temperatures
but it is suitable for intermittent wetting where it can dry out. Nylon has excellent load
bearing qualities and abrasion resistance.

NNP

PLAIN BORE -
Plain bore that will run easily on a smooth axle – nylon has self-lubricating properties

NNI

DELRIN BUSHINGS
Inserted POM (polyoxymethylene) bushing also known as Delrin is an acetal resin that
combines toughness and creep, fatigue, wear, and abrasion resistance with stiffness and
strength to replace metal.

NNR

ROLLER BEARINGS
Roller bearings in both carbon steel and stainless steel reducing the rolling resistance and
providing longer life to hard wearing wheels.

NNB

PRECISION BEARINGS
Precision ball bearings in steel and stainless steel – the ultimate option for low/no
maintenance, smooth rolling, long life.

l 51 l

NYLON 6 NYLON TREAD, NYLON CENTRE FOR LIGHT, MEDIUM
AND HEAVY DUTY
CASTORS ONLY
FOR PREMIUM WHEELS REFER TO PAGE 73

WHEEL TREAD WHEEL CODE MAX LOAD BORE BORE HUB BEARING TYPE AXLE CASTOR SERIES LIGHT
DIAMETER WIDTH (KG DIAMETER DIAMETER LENGTH SPACER TYPE
(no spacer mm)
(mm) (mm) (spacer (mm)
mm) 23

50 20 NN05020P(F) 60 6 N/A PLAIN BORE N/A L
PLAIN BORE N/A N/A
50 20 NN05020P10 60 10 N/A 23 PLAIN BORE N/A MEDIUM
PLAIN BORE SS SLEEVE L
50 20 NN05020P 60 6 N/A 20 PLAIN BORE POM TUBE KS
PLAIN BORE SLEEVE M,MS
75 25 NN07525P(6) 75 8 6 29.5 PRECISION BEARINGS TOP HAT D
PLAIN BORE SS SLEEVE D
75 32 NN07532I 130 15 8 38 PLAIN BORE N/A JS
PLAIN BORE POM TUBE K
80 30 NN08030P 150 12 10 40 PLAIN BORE SLEEVE M,MS HEAVY
PLAIN BORE SS SLEEVE D
80 30 NN08030B 150 15 10 40 ROLLER BEARING SLEEVE JS
SS ROLLER BEARING SLEEVE J
80 35 NN08035P 250 12 8 45 DELRIN BUSHINGS POM TUBE JS
PRECISION BEARINGS TOP HAT H, S
100 25 NN10025P 80 8 30 PRECISION BEARINGS TOP HAT H, S WHEELS
PRECISION BEARINGS TOP HAT D
100 32 NN10032I 140 15 8 38 PLAIN BORE POM TUBE N/A
PLAIN BORE SLEEVE M,MS
100 32 NN10032P(F) 180 12 10 40 ROLLER BEARING SLEEVE D
SS ROLLER BEARING SLEEVE J
100 35 NN10035P 300 12 8 40 DELRIN BUSHINGS POM TUBE JS
PRECISION BEARINGS TOP HAT H, S
100 35 NN10035R 220 12 8 45 PRECISION BEARINGS TOP HAT H, S
PRECISION BEARINGS TOP HAT N/A
100 35 NN10035SR 220 12 8 45 PLAIN BORE POM TUBE D
PRECISION BEARINGS TOP HAT H, S
100 50 NN10050I 350 19 1/2" 60 SS PRECISION SS SLEEVE H, S
PLAIN BORE POM TUBE HS
100 50 NN10050B 400 20 1/2" 60 PRECISION BEARINGS TOP HAT H, S
H, S
100 32 NN10032B(F) 180 15 10 40
l 52 l
100 35 NN10035B 250 15 10 45

125 32 NN12532I 150 15 8 38

125 32 NN12532P(F) 200 15 10 40

125 40 NN12540R 250 15 10 45

125 40 NN12540SR 250 15 10 45

125 50 NN12550I 400 19 1/2" 60

125 50 PO127/20K* 400 20 1/2" 60

125 40 NN12540B 320 15 10 45

125 32 NN12532B(F) 200 15 10 40

150 50 PO150/20G* 400 19 1/2" 60

150 50 PO150/20K* 400 20 1/2" 60

150 50 NN15050SB 550 20 1/2" 60

200 50 PO200/20G* 600 19 1/2" 60

200 50 PO200/20G* 600 20 1/2" 60
*BLICKLE CODE

CASTORWHEELS

MISCELLANEOUS RUBBER/PVC

PLASTIC, ALUMINIUM & STEEL HUB

WHEEL TREAD WHEEL CODE MAX LOAD BORE BORE HUB LENGTH BEARING TYPE AXLE DESCRIPTION
DIAMETER WIDTH (KG) DIAMETER DIAMETER (mm) SPACER
(mm) (mm) (no spacer mm)
(spacer TYPE
mm)

100 30 VPP100/12G* 70 12 8 45 PLAIN BUSH SLEEVE BLACK RUBBER

100 30 VPP100/12R* 70 12 8 45 ROLLER BEARING SLEEVE BLACK RUBBER

100 30 VPP100/12R-SG* 70 12 8 45 ROLLER BEARING SLEEVE GREY RUBBER

125 38 PVP12538P 100 1/2" N/A 38 X 10 OFFSET PLAIN BUSH N/A GENERAL PURPOSE

125 37.5 VPP125/12G* 100 12 8 45 PLAIN BUSH SLEEVE BLACK RUBBER

125 37.5 VPP125/12R* 100 12 8 45 ROLLER BEARING SLEEVE BLACK RUBBER

125 37.5 VPP125/12R-SG* 100 12 8 45 ROLLER BEARING SLEEVE GREY RUBBER

150 40 PVP15040P 100 1/2" N/A 38 X 10 OFFSET PLAIN BUSH N/A

GENERAL PURPOSE

150 40 PVP15040B 100 1/2" N/A 40 X 10 OFFSET BALL BEARINGS N/A

150 40 VPP150/20G* 135 20 12 60 PLAIN BUSH SLEEVE BLACK RUBBER

150 40 VPP150/20R* 135 20 12 60 ROLLER BEARING SLEEVE BLACK RUBBER

150 40 VPP150/20R-SG* 135 20 12 60 ROLLER BEARING SLEEVE GREY RUBBER

160 40 LWPH160SW 130 20 10.5 46 ROLLER BEARING SLEEVE

175 40 PVP17540P 100 1/2" N/A 38 X 10 OFFSET PLAIN BUSH N/A

175 40 PVP17540B 100 1/2" N/A 40 X 10 OFFSET BALL BEARINGS N/A GENERAL PURPOSE

200 40 PVP20040P 100 1/2" N/A 38 X 10 OFFSET PLAIN BUSH N/A

200 40 PVP20040B 100 1/2" N/A 40 X 10 OFFSET BALL BEARINGS N/A

200 50 VPP200/20G* 205 20 12 60 PLAIN BUSH SLEEVE BLACK RUBBER

200 50 VPP200/20R* 205 20 12 60 ROLLER BEARING SLEEVE BLACK RUBBER

200 50 VPP200/20R-SG* 205 20 12 60 ROLLER BEARING SLEEVE GREY RUBBER

250 50 BKS25050R 180 20 1/2" 56 ROLLER BEARING SLEEVE MISC RUBBER

250 50 BKA25050B(25) 600 25 1/2" 60 PRECISION BEARINGS SLEEVE MISC RUBBER

280 70 BKS28070F* 300 5/8", 3/4", 20, 1" N/A 60 FLANGE BALL N/A MISC RUBBER

280 70 BKS28070P* 300 20, 25 N/A 60 PRECISION BEARINGS N/A MISC RUBBER
*BLICKLE CODE

PVP20040B PVP20040P BKS25050R BKS28070P VPP200/20R VPP200/20R-SG
BKS28070F

l 53 l

FOR LIGHT, MEDIUM
AND HEAVY DUTY
CASTORS ONLY

HEAT RESISTANT RHT FOR PREMIUM WHEELS REFER TO PAGE 73
EEB
BLACK HIGH TEMP RUBBER
PHENOLIC - QUAD PLUS BEARING
Compression molded thermoset phenolic material. Continuous Black elastic high temperature rubber with a ditherm compound centre. LIGHT
temperature rating: 260 °C Intermittent temperature rating: 290°C. Maximum temperature 260°C- Continuous. Resists thermal shock from
Not to be used in steam applications. -40°C to 300°C deg in 60 seconds

RXT MTW/LTW MEDIUM

WHITE HIGH TEMP RUBBER DITHERM
Continuous 280 deg C, Peaks of 300 deg C. Great in freezers to -40 deg
White elastic high temperature rubber tread with a ditherm compound C. Resistant to water, most solvents, oils, acids and chemicals.
centre. Temperature ranges from - 40 to 300°C- Continuous
POHI HEAVY
G150/G200
HEAT & IMPACT RESISTANT NYLON
RUGGED GREY CAST IRON Operating temperature from -25°C to +250°C. Suitable for autoclaves.
Heat and impact resistant nylon. Low rolling resistance. Plain bore and Available with HT Ball bearings or Plain Bore.
ball bearing options. Temperature ranges from - 25°C to 300°Continuous
? NOTE: Please ask us about other heat resistant wheel options.

WHEEL TREAD WHEEL CODE MAX LOAD BORE BORE HUB BEARING TYPE AXLE CASTOR SERIES WHEELS
DIAMETER WIDTH (KG) DIAMETER DIAMETER LENGTH SPACER TYPE
(mm) (mm) (no spacer mm)
(spacer (mm)
mm)

100 35 MTW10035T 170 10 8 45 PLAIN BORE DITHERM SS SLEEVE M HEATMASTER
100 40 EE10040B 150 8 N/A
100 50 EE10050B 250 1/2” N/A 45 QUAD-PLUS BEARING SYSTEM N/A M HEATMASTER
100 35 RXT10035T 120 10 45
100 35 RHT10035T 120 10 45 60 QUAD-PLUS BEARING SYSTEM N/A H HEATMASTER
125 50 EE12550B 300 1/2” N/A
150 50 EE15050B 400 1/2” N/A 45 HT PLAIN BORE SS SLEEVE M HEATMASTER
150 45 LTW15045 250 12 15
150 50 G150/20G* 900 20 1/2” 45 HT PLAIN BORE SS SLEEVE M HEATMASTER
150 50 POHI150/20G* 300 20 1/2”
150 50 POHI150/20K* 300 20 1/2” 60 QUAD-PLUS BEARING SYSTEM N/A H HEATMASTER
200 50 G200/20G* 1100 20 1/2”
200 50 POHI200/20G* 600 20 1/2” 60 QUAD-PLUS BEARING SYSTEM N/A H HEATMASTER
*BLICKLE CODE
45 HT PLAIN BORE SELF LUBE N/A

60 PLAIN BORE - CAST IRON SS SLEEVE H HEATMASTER

60 HT NYLON SS SLEEVE H HEATMASTER

50 (60 W/ HT BALL BEARINGS MILD STEEL H HEATMASTER

60 PLAIN BORE - CAST IRON SS SLEEVE H HEATMASTER

60 HT NYLON SS SLEEVE HEATMASTER

EEB RXT RHT MTW POHI

l 54 l

ACCESSORIES

EXPANDING ADAPTORS

»» Adaptors have an expansion range of 2.0mm TO 2.5mm. They are
recommended for tubes with 1.6 wall or greater.
»» It is recommended that adaptors are rechecked for tightness up to four
weeks after initial installation
»» Adaptors can be purchased separately or assembled into bolt hole style
castors
»» Pintle bolts can be purchased separately or assembled into bolt hole
style castors

ADAPTORS SOLID STEM

OUTER AND INNER SET ALL THREADED M12 TO SUIT BOLT HOLE CASTORS

ITEM CODE MOUNTING TYPE THREADED ITEM CODE STEM OD X LENGTH CROSS HOLE & POSITION SHAPE
EXP-R19M10 ROUND M10 3PR18SET
EXP-R22M10 ROUND M10 2PR28SET 18mm X 62mm M8 TAPPED @ 19mm ROUND
EXP-R27M10 ROUND M10
EXP-Q20M10 SQUARE M10 28mm X 45mm M8 TAPPED @ 19mm ROUND
EXP-Q22M10 SQUARE M10
EXP-Q25M10 SQUARE M10 SOLID STEM + FIXING SCREW
EXP-R19M12 ROUND M12
EXP-R22M12 ROUND M12 STAINLESS STEEL TO SUIT SS CASTORS WITH M12 BOLT HOLE
EXP-R27M12 ROUND M12
EXP-Q27M12 SQUARE M12 ITEM CODE STEM OD X LENGTH CROSS HOLE & POSITION SHAPE
EXP-Q20M12 SQUARE M12 ZAX51
EXP-Q22M12 SQUARE M12 18mm X 62mm M6 TAPPED @ 30mm ROUND
EXP-Q25M12 SQUARE M12
EXP-Q27M12 SQUARE M12

SC11.012X025-A2 M12 x 25mm SS

l 55 l

DFAFCOUONARTSRDYLTICLHOGAIHERSGTASTHOVATRONY,SDNDMOLMUNYEELTDDYYII UUMM

ADAPTORS ADAPTORS LIGHT
OUTER AND INNER PLUS PINTLE BOLT - ZINC OUTER AND INNER PLUS PINTLE BOLT - STAINLESS

ITEM CODE MOUNTING TYPE BOLT SIZE ITEM CODE MOUNTING TYPE BOLT SIZE
EXP-R19M10KIT ROUND M10 M10
EXP-R22M10KIT ROUND M10 EXP-R19M10KITSS ROUND M10 MEDIUM
EXP-R27M10KIT ROUND M10 M10
EXP-Q20M10KIT SQUARE M10 EXP-R22M10KITSS ROUND M10
EXP-Q22M10KIT SQUARE M10 M10
EXP-Q25M10KIT SQUARE M10 EXP-R27M10KITSS ROUND M10
EXP-Q27M12-KIT SQUARE M12 M12
EXP-R19M12KIT ROUND M12 EXP-Q20M10KITSS SQUARE M12 HEAVY
EXP-R22M12KIT ROUND M12 M12
EXP-R27M12KIT ROUND M12 EXP-Q22M10KITSS SQUARE M12
EXP-Q20M12KIT SQUARE M12 M12
EXP-Q22M12KIT SQUARE M12 EXP-Q25M10KITSS SQUARE M12
EXP-Q25M12KIT SQUARE M12 M12
EXP-Q27M12KIT SQUARE M12 EXP-R19M12KITSS ROUND

EXP-R22M12KITSS ROUND

EXP-R27M12KITSS ROUND ACCESSORIES

EXP-Q20M12KITSS SQUARE

EXP-Q22M12KITSS SQUARE

EXP-Q25M12KITSS SQUARE

EXP-Q27M12KITSS SQUARE

PINTLE BOLTS NYLON SLEEVE

FOR USE WITH 3PR18SET AND ZAX51

ITEM CODE DESCRIPTION ITEM CODE SLEEVE OD X LENGTH SHAPE
KPINTLEBOLT M10 X 75 ZINC COATED PINTLE BOLT
KPINTLEBOLTSS M10 X 75 STAINLESS STEEL PINTLE BOLT NRS221862 22MM X 62MM SQUARE
MPINTLEBOLT M12 X 75 ZINC COATED PINTLE BOLT
MPINTLEBOLTSS M12 X 75 STAINLESS STEEL PINTLE BOLT NRR221862 22MM X 62MM ROUND

l 56 l

ACCESSORIES

TROLLEY LOCKS

TO STOP TROLLEY MOVEMENT

FLOOR LOCKS - LIFT UP & HOLD

ITEM CODE FOR CASTOR MOUNT HEIGHT H1 (mm) H2 (mm) S (mm) L (mm) H (mm) UNIT WEIGHT LOAD RATING
(mm) (KGS) (KGS)
SIZE 155 125 30 142 1.5
211 168 36 142 1.5
FL900 - 2 4" / 100 148 255 212 36 142 3.5 1.5 200

FL900 - 4 6" / 150 204 1.75 300

FL900 - 6 8" / 200 248 1.9 300

110 L
85 h

110 11 mm H1 H2 80
85 SLOTED
HOLES S
7º
70 50

TRUCK LOCKS - FRICTION HOLD

ITEM CODE FULLY EXTENDED RETRACTED TOP PLATE BOLT HOLE CENTRES ATTACHING BOLT
HEIGHT (mm) HEIGHT (mm) (mm) (mm) SIZE (mm)

LTL- SW - L 381 346 165 X 114 TO BE DRILLED ON SITE N/A
165 X 114
LTL-SW-R 381 346 100 X 85 TO BE DRILLED ON SITE N/A
140 X 110
FF100-1 138 108 80 X 60 9

FF150 208 170 105 X 75-80 12.3

l 57 l

FOR LIGHT, MEDIUM
AND HEAVY DUTY
CASTORS ONLY

BUMPERS LIGHT

NON-MARKING ROUND LEG MEDIUM
»» Made from hard wearing thermoplastic elastomer
»» Solid non marking TPR material
»» Shock / impact absorbing

ITEM CODE DESCRIPTION/ MOUNTING DIAMETER X BORE HEAVY
TDC225-RD TPE CASTOR DRESS CAP BUMPER / ROUND WIDTH (mm) (mm)
94 X 15 / 9 22.5 RD
25.5 RD
TDC255-RD TPE CASTOR DRESS CAP BUMPER / ROUND 94 X 15 / 9 32.5 RD
25.5 SQ
TDC325-RD TPE CASTOR DRESS CAP BUMPER / ROUND 94 X 15 / 9 25 SQ
26 RD
TDC255-SQ TPE CASTOR DRESS CAP BUMPER / SQUARE 94 X 15 / 9 26 RD

AG125/V25 POLYETHYLENE BUMPER/SQUARE 125 X 17.5

ARG100/R26 SOLID RUBBER BUMPER / ROUND 100 X 23 ACCESSORIES

ARG125/R26 SOLID RUBBER BUMPER / ROUND 125 X 23

BUMPERS

NON-MARKING CORNER
»» Non marking grey reinforced polyurethane
»» Internal steel support
»» External dimension 100 x 100 x 25 mm
»» Hole dimension 4
ITEM CODE - PCB10010020

ITEM CODE DESCRIPTION EXTERNAL INTERNAL MOUNTING
DIMENSIONS (mm) DIMENSIONS (MM) DIMENSIONS (mm)

PCB10010020 GREY TPU, STEEL REINFORCED 100X100X25 80X80 15X50/6mm

l 58 l

ACCESSORIES

ADJUSTABLE & FIXED FEET
STANDARD ADJUSTABLE FEET

»» Strong fibreglass reinforced nylon pad
»» Rubber insert for stability / floor portection
»» Steel ball joint provides strength
»» Zinc plated & stainless steel threaded stem & nut
»» Huge 400kgs - 750kgs max capacity

BOLT DOWN ADJUSTABLE FEET

»» Strong fibreglass reinforced nylon pad
»» Rubber insert for stability / floor protection
»» Steel ball joint provides strength
»» Stainless steel threaded stem & nut
»» 700Kgs - 1200kgs max capacity
»» Bolt-down prevents vibration movement

l 59 l

FFOORR LELVIEGLLHINT G, MMAECHDINI UERMY,
ASNHEDLVHINEG ARVACYKIDNGU ATNYD
CSATASTITCODRISSPL AOYNS L Y

ZINC THREAD LIGHT

PRODUCT A M L1 B L D H MAX STATIC MEDIUM
CODE VERTICAL LOAD
40 MM M10 X 1.5 64mm 32mm 19mm 15.3mm 17mm
AFT1064-40Z 60mm M12 X 1.75 64mm 40mm 25mm 15.3mm 17mm 400KG
AFT1264-60Z 80 mm M16 X 2.00 64mm 42mm 25mm 23.5mm 24mm 650KG
AFT1664-80Z 750KG

STAINLESS STEEL THREAD (304 GRADE) HEAVY

PRODUCT A M L1 B L D H MAX STATIC ACCESSORIES
CODE VERTICAL LOAD
40mm M10 X 1.5 64mm 32mm 19mm 15.3mm 17mm
AFT1064-40S 60mm M12 X 1.75 64mm 40mm 25mm 15.3mm 17mm 400KG
AFT1264-60S 80mm M16 X 2.00 64mm 42mm 25mm 23.5mm 24mm 650KG
AFT1664-80S 750KG

STAINLESS STEEL THREAD (304 GRADE)

PRODUCT CODE A M L1 B L D H C MAX STATIC
VERTICAL LOAD
AFBD10100-80S 80mm M10 X 1.5 100mm 32mm 19mm 15.3mm 17mm 56mm
AFBD12100-80S 80mm M12 X 1.75 100mm 35mm 19mm 15.3mm 17mm 56mm 700KG
AFBD16150-100S 100mm M16 X 2.00 150mm 46mm 30mm 23.5mm 24mm 75mm 750KG
AFBD20150-100S 100mm M20 X 2.5 150mm 46mm 30mm 23.5mm 24mm 75mm 900KG
1200KG

l 60 l

ACCESSORIES

ADJUSTABLE & FIXED FEET
STANDARD FIXED FEET

»» Economical model for lighter applications
»» Zinc plated threaded stem & nut
»» Fibreglass reinforced nylon pad

TAPERED NYLON FOOT

»» Zinc plated threaded stem & nut
»» Fibreglass reinforced nylon pad
»» Thicker pad with lugs for easy hand adjustment

HEAVY NYLON FOOT

»» Zinc plated threaded stem, nut & pad cover
»» Rubber insert reduces vibration

STEEL COVERED

ZINC PLATED

l 61 l

FFOORR LELVIEGLLHINTG, MMAECHDINI UERMY,
ASNHEDLVIHNEG ARVACYKIDNGU ATNYD
CSATASTITCODRISSPL AOYNS L Y

TAPERED NYLON LIGHT

PRODUCT A M L1 L MAX STATIC MEDIUM
CODE VERTICAL LOAD
40mm M8 X 1.25 50mm 13mm
AFF850-40Z 50mm M10 X 1.5 50mm 13mm 100KG
AFF1050-50Z 60mm M12 X 1.75 50mm 13mm 150KG
AFF1250-60Z 200KG

HEAVY NYLON HEAVY

PRODUCT A M L1 L MAX STATIC ACCESSORIES
CODE VERTICAL LOAD
38mm M8 X 1.25 50mm 10mm
AFFH850-38Z 50mm M10 X 1.5 50mm 10mm 200KG
AFFH1050-50Z 63mm M12 X 1.75 50mm 10mm 250KG
AFFH1250-63Z 250KG

STEEL COVERED

ZINC PLATED

PRODUCT CODE A M L1 L L2 MAX STATIC
VERTICAL LOAD
AFFM850-40Z 40mm M8 X 1.25 50mm 17mm 4mm
AFFM1050-50Z 50mm M10 X 1.5 50mm 17mm 4mm 300KG
AFFM1250-60Z 60mm M12 X 1.75 50mm 20mm 6mm 450KG
AFFHD1050-50Z 50mm M10 X 1.5 50mm 17mm 4MM 600KG
450KG

l 62 l

ACCESSORIES

TUBE INSERTS

THREADED KNOCK IN TUBE INSERTS
»» Square & round inserts available in sizes to fit
»» Most shelving tube sizes
»» Fibreglass reinforced nylon for strength / stability
»» Maintenance free zinc plated & stainless steel internal thread
»» Extended thread length

ROUND INSERTS

THREADED KNOCK IN TUBE INSERTS

ROUND INSERTS

STAINLESS STEEL THREAD

PRODUCT CODE M B C H S TUBE ID MAX LOAD
TTIR25-M10S M10 X 1.5 X 24 25mm 23mm 46mm 38mm 22mm - 23mm 120KG
TTIR25-M12S M12 X 1.75 X 24 25mm 23mm 46mm 38mm 22mm - 23mm 160KG
TTIR32-M10S M10 X 1.5 X 24 32mm 29mm 42mm 36mm 28mm - 29mm 300KG
TTIR32-M12S M12 X 1.75 X 24 32mm 29mm 42mm 36mm 28mm - 29mm 400KG
TTIR38-M10S M10 X 1.5 X 24 38mm 35mm 45mm 38mm 35mm - 36mm 300KG
TTIR38-M12S M12 X 1.75 X 24 38mm 35mm 45mm 38mm 35mm - 36mm 500KG
TTIR51-M12S M12 X 1.75 X 24 51mm 48mm 45mm 38mm 47mm - 48mm 800KG

l 63 l

FFOORRLELVEI GLLHINTG, MMACEHDINIEURMY,
SAHNEDLVINHGE RAAVCYKINDGUATNYD
SCTAATSICT ODIRSPSL AOYSN L Y

SQUARE INSERTS LIGHT

STAINLESS STEEL THREAD

PRODUCT CODE M B C H S TUBE ID MAX LOAD MEDIUM
TTIS25-M10S M10 X 1.5 X 24 25mm 23.3mm 45mm 39mm 22mm - 23mm 100KG
TTIS25-M12S M12 X 1.75 X 24 25mm 23.3mm 45mm 39mm 22mm - 23mm 100KG HEAVY
TTIS30-M10S M10 X 1.5 X 24 30mm 27.6mm 45mm 37mm 26mm - 27mm 160KG
TTIS30-M12S M12 X 1.75 X 24 30mm 27.6mm 45mm 37mm 26mm - 27mm 160KG ACCESSORIES
TTIS32-M10S M10 X 1.5 X 24 32mm 30mm 46mm 39mm 28mm - 29mm 180KG
TTIS32-M12S M12 X 1.75 X 24 32mm 30mm 46mm 39mm 28mm - 29mm 180KG
TTIS35-M12S M12 X 1.75 X 24 35mm 32mm 46mm 39mm 31mm - 32mm 400KG
TTIS38-M10S M10 X 1.5 X 24 38mm 35.8mm 45mm 37mm 35mm - 36mm 300KG
TTIS38-M12S M12 X 1.75 X 24 38mm 35.8mm 45mm 37mm 35mm - 36mm 400KG
TTIS40-M10S M10 X 1.5 X 24 40mm 37mm 45mm 40mm 36mm - 37mm 200KG
TTIS40-M12S M12 X 1.75 X 24 40mm 37mm 45mm 40mm 36mm - 37mm 400KG
TTIS40-M16S M16 X 2 X 31 40mm 37mm 45mm 40mm 36mm - 37mm 500KG
TTIS51-M10S M10 X 1.5 X 24 51mm 48.5mm 50mm 35mm 47mm - 48mm 680KG
TTIS51-M12S M12 X 1.75 X 24 51mm 48.5mm 49mm 39mm 47mm - 48mm 800KG
TTIS51-M16S M16 X 2 X 31 51mm 48.5mm 49mm 39mm 47mm - 48mm 800KG

SQUARE INSERTS

ZINC THREAD

PRODUCT CODE M B C H S TUBE ID MAX LOAD
TTIS25-M10Z M10 X 1.5 X 24 25mm 23.3mm 45mm 39mm 22mm - 23mm 100KG
TTIS25-M12Z M12 X 1.75 X 24 25mm 23.3mm 45mm 39mm 22mm - 23mm 100KG
TTIS30-M10Z M10 X 1.5 X 24 30mm 27.6mm 45mm 37mm 26mm - 27mm 160KG
TTIS30-M12Z M12 X 1.75 X 24 30mm 27.6mm 45mm 37mm 26mm - 27mm 160KG
TTIS32-M10Z M10 X 1.5 X 24 32mm 30mm 45mm 37mm 28mm - 29mm 180KG
TTIS32-M12Z M12 X 1.75 X 24 32mm 30mm 46mm 39mm 28mm - 29mm 180KG
TTIS38-M10Z M10 X 1.5 X 24 38mm 35.8mm 46mm 39mm 35mm - 36mm 300KG
TTIS38-M12Z M12 X 1.75 X 24 38mm 35.8mm 47mm 39mm 35mm - 36mm 400KG
TTIS40-M10Z M10 X 1.5 X 24 40mm 37mm 45mm 40mm 36mm - 37mm 200KG
TTIS40-M12Z M12 X 1.75 X 24 40mm 37mm 45mm 40mm 36mm - 37mm 400KG
TTIS40-M16Z M16 X 2 X 31 40mm 37mm 45mm 40mm 36mm - 37mm 500KG
TTIS51-M10Z M10 X 1.5 X 24 51mm 48.5mm 49mm 39mm 47mm - 48mm 680KG
TTIS51-M12Z M12 X 1.75 X 24 51mm 48.5mm 49mm 39mm 47mm - 48mm 800KG
TTIS51-M16Z M16 X 2 X 31 51mm 48.5mm 49mm 39mm 47mm - 48mm 800KG

l 64 l

PREMIUMCASTORS

HIGH IMPACT Brackets: LH/BH series - Made of heavy pressed steel, swivel bracket with
NYLON WHEEL heavy fork and top plate, very strong bolted and secured central kingpin,
double ball bearing in the swivel head, additionally reinforced by the
HIGH CAPACITY LOW WEIGHT | SOLID NYLON TREAD AND CENTRE integration of four specially shaped and hardened bearing seats resulting
in a very high resistance to shock and impact loads.

Bolted wheel axle.

Zinc-plated, blue-passivated, Cr6-free.

Wheels: GSPO series - Made of high-quality, impact resistant, hard and
tough, highly compressed cast nylon, 80° shore D, natural beige.

Bearing type: Two pressed-in ball bearings.

SWIVEL CASTORS FIXED CASTORS SWIVEL CASTORS MAX WHEEL WHEEL OVERALL OFFSET PLATE HOLE CENTRES &
WITH BRAKE LOAD DIAMETER BEARING TYPE HEIGHT SWIVEL SIZE (mm) HOLE SIZE (mm)
(KG) x WIDTH (mm) CASTOR
(mm)
(mm)

LH-GSPO80K BH-GSPO80K LH-GSPO80K-FI 700 80 x 40 BALL BEARING 120 45 100 X 85 80 x 60
LH-GSPO100K-1 BH-GSPO100K-1 LH-GSPO100K-1-FI 700 100 x 40 BALL BEARING 140
LH-GSPO125K BH-GSPO125K LH-GSPO125K-FI 900 125 x 55 BALL BEARING 170 45 100 X 85 80 x 60

55 140 x 110 105 x 75/80(11)

CAST IRON WHEEL Brackets: LH/BH series - Made of heavy pressed steel, swivel bracket with
heavy fork and top plate, very strong bolted and secured central kingpin,
SOLID CAST IRON TREAD AND CENTRE double ball bearing in the swivel head, additionally reinforced by the
integration of four specially shaped and hardened bearing seats resulting
in a very high resistance to shock and impact loads.

Bolted wheel axle.

Zinc-plated, blue-passivated, Cr6-free.

Wheels: G series - Made of grey cast iron, with grease nipple, lacquered,
silver.

Bearing types: Plain bore or two pressed-in ball bearings.

SWIVEL CASTORS FIXED CASTORS SWIVEL CASTORS MAX WHEEL WHEEL OVERALL OFFSET PLATE SIZE HOLE CENTRES
WITH BRAKE LOAD DIAMETER BEARING TYPE HEIGHT SWIVEL (mm) & HOLE SIZE
(KG) x WIDTH (mm) CASTOR (mm)
(mm)
(mm)

LH-G100K-3 BH-G100K-3 LH-G100K-3-FI 400 100 x 35 BALL BEARING 140 45 140 x 110 105 x 75/80(11)
LH-G150K BH-G150K LH-G150K-FI 65 140 x 110 105 x 75/80(11)
LH-G200K BH-G200K LH-G200K-FI 900 150 x 50 BALL BEARING 197 70 140 x 110 105 x 75/80(11)

900 200 x 50 BALL BEARING 245

l 65 l

CHECK OUT THE FULL BLICKLE RANGE IN THE BLICKLE G15 CATALOGUE

EXTRATHANE PU WHEEL LIGHT

EXTRATHANE POLYURETHANE TREAD | CAST IRON CENTRE Pressed steel castors, heavy duty brackets, with top plate fitting,
wheel with Blickle Extrathane® polyurethane tread
MEDIUM
Brackets: LH/BH series - Made of heavy pressed steel, swivel bracket with
heavy fork and top plate, very strong bolted and secured central kingpin, HEAVY
double ball bearing in the swivel head, additionally reinforced by the
integration of four specially shaped and hardened bearing seats resulting
in a very high resistance to shock and impact loads.

Bolted wheel axle.

Zinc-plated, blue-passivated, Cr6-free.

Wheels: GTH series - Tread: Made of high-quality polyurethane-elastomer
Blickle Extrathane®, 92° shore A, light brown, non-marking, non-staining.

Wheel centre: Made of rugged grey cast iron, wheel Ø 150 mm or larger
with grease nipple, lacquered, silver.

Bearing type: Two pressed-in ball bearings.

SWIVEL CASTORS FIXED CASTORS SWIVEL CASTORS MAX WHEEL WHEEL OVERALL OFFSET PLATE SIZE HOLE CENTRES
WITH BRAKE LOAD DIAMETER BEARING TYPE HEIGHT SWIVEL (mm) & HOLE SIZE
(KG) x WIDTH (mm) CASTOR (mm)
(mm)
(mm)

LH-GTH125K-3 BH-GTH125K-3 LH-GTH125K-3-FI 500 125 x 40 BALL BEARING 165 45 140 x 110 105 x 75/80(11)
LH-GTH150K BH-GTH150K LH-GTH150K-FI 750 150 x 50 BALL BEARING 197 65 140 x 110 105 x 75/80(11)
LH-GTH200K BH-GTH200K LH-GTH200K-FI 900 200 x 50 BALL BEARING 245 70 140 x 110 105 x 75/80(11)

PREMIUM
HEAVY

EXTRATHANE PU WHEEL Wheels: ALTH series - Tread: Made of high-quality polyurethane-elastomer
Blickle Extrathane®, 92° shore A, light brown, non-marking, non-staining.
EXTRATHANE POLYURETHANE TREAD | ALUMINIUM CENTRE
Wheel centre: Made of die-cast aluminium.

Bearing type: Two pressed-in ball bearings.

SWIVEL CASTORS FIXED CASTORS SWIVEL CASTORS MAX WHEEL WHEEL OVERALL OFFSET PLATE SIZE HOLE CENTRES
WITH BRAKE LOAD DIAMETER BEARING TYPE HEIGHT SWIVEL (mm) & HOLE SIZE
(KG) x WIDTH (mm) CASTOR (mm)
(mm)
(mm)

LH-ALTH101K-1 BH-ALTH101K-1 LH-ALTH101K-1-FI 350 100 x 40 BALL BEARING 140 45 100 x 85 80 x 60
LH-ALTH101K-3 BH-ALTH101K-3 LH-ALTH101K-3-FI 350 100 x 40 BALL BEARING 140
45 140 x 110 105 x 75/80(11)

l 66 l

PREMIUMCASTORS

COMPACT CASTORS - The special Blickle dynamic riveting process of the swivel head results in minimal
EXTRATHANE & NYLON swivel head play and smooth rolling characteristics with an increased service life
WHEELS achieved by the work hardening of the ball race grooves.

HIGH CAPACITY LOW HEIGHT VSTH-wheel series:

EXTRATHANE POLYURETHANE TREAD I STEEL CENTRE I Tread: Made of high-quality polyurethane-elastomer Blickle Extrathane®, 92° shore
BLACK IMPACT RESISTANT NYLON A, light brown, non-marking, non-staining.
Heavy pressed steel parts, double ball bearing in the swivel head,
with strong central kingpin Wheel centre: Made of steel, with two pressed-in ball bearings.

POA Wheel Series: Tread wheel centre. Made of high quality, impact resistant nylon,
70 Shore D, with plain bore

SWIVEL CASTORS MOUNT TYPE LOAD CAPACITY (KG) WHEEL WHEEL BEARING OVERALL OFFSET SWIVEL | RIGID HOLE CENTRES &
LRA-VSTH35K BOLT HOLE (11MM) DIAMETER x TYPE HEIGHT SWIVEL PLATE SIZE HOLE SIZE (mm)
WIDTH (mm) (mm) CASTOR (mm)
BALL BEARING (mm)
50
100 35 X 27 15 N/A N/A

LPA-VSTH35K PLATE 100 35 X 27 BALL BEARING 52 15 60 X 60 38 X 38/48 X 48

LKRA-VSTH50K BOLT HOLE (13MM) 150 50 X 33 BALL BEARING 70 29 N/A N/A

LKPA-VSTH50K PLATE 150 50 X 33 BALL BEARING 73 29 90 X 66 75 X 45/61 X 51

LK-VSTH65K PLATE 250 65 x 40 BALL BEARING 90 40 100 x 85 80 x 60 (9)

LRA-POA35G BOLT HOLE (11MM) 75 35 X 25 PLAIN BORE 50 15 N/A N/A

LPA - POA35G PLATE 75 35 X 25 PLAIN BORE 52 15 60 X 60 38 X 38/48 X 48

LKRA-POA52G BOLT HOLE (13MM) 120 50 X 29 PLAIN BORE 70 29 N/A N/A

LKPA-POA52G PLATE 120 50 X 29 PLAIN BORE 73 29 90 X 66 75 X 45/61 X 51

BESTHANE The special Blickle dynamic riveting process of the swivel head
POLYURETHANE WHEEL results in minimal swivel head play and smooth rolling characteristics
with an increased service life achieved by the work hardening of the
BESTHANE POLYURETHANE TREAD|ALUMINIUM CENTRE ball race grooves.

Pressed steel castors, medium heavy duty brackets, with top plate
fitting, wheel with Blickle Besthane® polyurethane tread

SWIVEL FIXED SWIVEL CASTORS LOAD WHEEL WHEEL OVERALL OFFSET SWIVEL | RIGID HOLE CENTRES &
CASTORS CASTORS WITH WHEEL CAPACITY DIAM x BEARING TYPE HEIGHT SWIVEL PLATE SIZE HOLE SIZE (mm)
LK-ALB101K-1 BRAKE WIDTH (mm) CASTOR (mm)
(KG) (mm) (mm)

BK-ALB101-1 LK-ALB101K-1-FI 350 100 x 40 BALL BEARING 130 45 100 x 85 80 x 60 (9)

LK-ALB101K-3 BK-ALB101-3 LK-ALB101K-3-FI 350 100 x 40 BALL BEARING 130 45 140 x 110 105 x 75-80(11)

LK-ALB125K-1 BK-ALB125-1 LK-ALB125K-1-FI 350 125 x 40 BALL BEARING 155 48 100 x 85 80 x 60 (9)

LK-ALB125K-3 BK-ALB125-3 LK-ALB125K-3-FI 350 125 x 40 BALL BEARING 155 48 140 x 110 105 x 75-80 (11)

LK-ALB160K BH-ALB160K LK-ALB160K-FI 550 160 x 50 BALL BEARING 202 63 140 x 110 105 x 75/80(11)

LK-ALB200K BH-ALB200K LK-ALB200K-FI 600 200 x 50 BALL BEARING 245 65 140 x 110 105 x 75/80(11)

l 67 l

CHECK OUT THE FULL BLICKLE RANGE IN THE BLICKLE G15 CATALOGUE

HIGH IMPACT Welded steel extra heavy duty castors, extra strong swivel head LIGHT
NYLON WHEEL design, with heavy duty cast nylon wheel

SOLID NYLON TREAD AND CENTRE Brackets: LS/BS series - Particularly rugged welded steel construction,
swivel bracket with axial grooved ball bearing DIN 711 and tapered roller
bearing DIN 720 in the swivel head, dust and splash-proof, fitted grease MEDIUM
nipple, bolted and secured with a welded very strong central kingpin.
HEAVY
Bolted wheel axle.

Wheel Ø 100 - 300x80 mm: Zinc-plated, yellow-passivated, Cr6-free.

Wheel Ø 300x110 - 400 mm: Lacquered, red.

Wheels: GSPO series - Made of high-quality, impact resistant, hard and
tough, highly compressed cast nylon, 80° shore D, natural beige.

Bearing type: Two pressed-in ball bearings.

SWIVEL CASTORS FIXED CASTORS SWIVEL CASTORS SWIVEL CASTORS WITH MAX WHEEL OVERALL OFFSET PLATE SIZE HOLE CENTRES
WITH WHEEL BRAKE 2 WAY DIRECTIONAL LOAD DIAMETER HEIGHT SWIVEL (mm) & HOLE SIZE
LOCK (KG) x WIDTH (mm) CASTOR (mm)
(mm)
(mm)

LS-GSPO101K BS-GSPO101K LS-GSPO101K-ST N/A 1500 100 x 55 145 50 140 x 110 105 x 75/80(11)
170 50 140 x 110 105 x 75/80(11)
LS-GSPO125K BS-GSPO125K LS-GSPO125K-ST N/A 1750 125 x 55 205 65 175 x 140 140 x 105(14)
205 65 175 x 140 140 x 105(14)
LS-GSPO150K-35 BS-GSPO150K-35 LS-GSPO150K-35-ST LS-GSPO150K-35-R12* 2500 150 x 55 255 65 175 x 140 140 x 105(14)
280 75 255 x 200 210 x 160(18)
LS-GSPO152K-35 BS-GSPO152K-35 LS-GSPO152K-35-ST LS-GSPO152K-35-R12* 3000 150 x 80 330 80 255 x 200 210 x 160(18)
380 90 255 x 200 210 x 160(18)
LS-GSPO200K-35 BS-GSPO200K-35 LS-GSPO200K-35-ST LS-GSPO200K-35-R12* 3000 200 x 55

LS-GSPO202K BS-GSPO202K LS-GSPO202K-RAH N/A 4500 200 x 80 PREMIUM
HEAVY
LS-GSPO252K BS-GSPO252K LS-GSPO252K-RAH N/A 6000 250 x 80

LS-GSPO300K BS-GSPO300K LS-GSPO300K-RAH N/A 6000 300 x 80

* 4 way directional lock available

l 68 l

PREMIUMCASTORS

EXTRATHANE PU WHEEL Welded steel heavy duty castors, strong swivel head design, wheel
with Blickle Extrathane® polyurethane tread
EXTRATHANE POLYURETHANE TREAD | CAST IRON CENTRE
Brackets: LS/BS series - Particularly rugged welded steel construction,
swivel bracket with axial grooved ball bearing DIN 711 and tapered roller
bearing DIN 720 in the swivel head, dust and splash-proof, fitted grease
nipple, bolted and secured with a welded very strong central kingpin.

Bolted wheel axle.

Wheel Ø 125-400 mm: Zinc-plated, yellow-passivated, Cr6-free.

Wheel Ø 500-600 mm: Lacquered, red.

Wheels: GTH series - Tread: Made of high-quality polyurethane-elastomer
Blickle Extrathane®, 92° shore A, light brown, non-marking, non-staining.

Wheel centre: Made of rugged grey cast iron, wheel Ø 150 mm or larger
with grease nipple, lacquered, silver.

Bearing type: Two pressed-in ball bearings.

SWIVEL FIXED SWIVEL SWIVEL CASTOR SWIVEL CASTORS MAX WHEEL OVERALL OFFSET PLATE SIZE HOLE CENTRES
CASTORS CASTORS CASTOR WITH WITH WHEEL WITH 2 OR 4 WAY LOAD DIAMETER HEIGHT SWIVEL (mm) & HOLE SIZE
BRAKE (KG) x WIDTH (mm) CASTOR (mm)
BRAKE DIRECTIONAL (mm)
LOCK (mm)

LS-GTH202K BS-GTH202K LS-GTH202K- N/A LS-GTH202K-RI2 1600 200 x 80 255 65 175 x 140 140 x 105(14)
LS-GTH252K BS-GTH252K ST 1800 250 x 80 305 75 175 x 140 140 x 105(14)
LS-GTH302K BS-GTH302K LS-GTH252K- N/A LS-GTH252K-RI2 2400 300 x 80 355 85 175 x 140 140 x 105(14)
LS-GTH304K ST 3000 300 x 100 370 85 200 x 160 160 x 120(14)
LS-GTH302K- N/A LS-GTH302K-RI2
ST

BS-GTH304K N/A LS-GTH304K-RAH N/A

LS-GTH364K BS-GTH364K N/A LS-GTH364K-RAH N/A 3800 360 x 120 430 100 255 x 200 210 x 160(18)

LS-GTH406K BS-GTH406K N/A N/A N/A 5000 400 x 125 480 125 255 x 200 210 x 160(18)

EXTRATHANE PU WHEEL Welded steel heavy duty twin wheel castors, strong swivel head design,
wheels with Blickle Extrathane® polyurethane tread
EXTRATHANE POLYURETHANE TREAD | CAST IRON CENTRE
*NOTE: Fixed castors - long plate is parallel to axle. Brackets: LSD/BSD series - Particularly rugged welded steel construction,
swivel bracket with axial grooved ball bearing DIN 711 and tapered roller
bearing DIN 720 in the swivel head, dust and splash-proof, fitted grease
nipple, bolted and secured with a welded very strong central kingpin.

Bolted wheel axle.

Wheel Ø 80-360 mm: Zinc-plated, yellow-passivated, Cr6-free.

Wheel Ø 400-500 mm: Lacquered, red.

GTH series: Made of rugged grey cast iron, wheel Ø 150 mm or larger with
grease nipple, lacquered, silver.

Bearing type: Two pressed-in ball bearings.

SWIVEL CASTORS FIXED CASTORS LOAD CAPACITY WHEEL DIAM x WHEEL OVERALL OFFSET SWIVEL | RIGID PLATE HOLE CENTRES &
(KG) WIDTH (mm) BEARING TYPE HEIGHT SWIVEL SIZE (mm) HOLE SIZE (mm)
BALL BEARING (mm) CASTOR
LSD-GTH304K BSD-GTH304K* 5400 300 x 100 ( x 2 ) (mm) 200 x 255 / 200 x 160 x 210(18)
LSD-GTH504K BSD-GTH504K* 10000 500 x 150 ( x 2 ) 390 300
80

BALL BEARING 630 125 300 x 400 240 x 340(26)

l 69 l

CHECK OUT THE FULL BLICKLE RANGE IN THE BLICKLE G15 CATALOGUE

HEAVY DUTY PNEUMATIC LIGHT
CASTORS
Welded steel heavy duty castors, strong swivel head design, heavy MEDIUM
EXTRATHANE BLACK RUBBER TREAD I STEEL CENTRE duty wheel with pneumatic tyre

Brackets: LS/BS series - Particularly rugged welded steel construction, HEAVY
swivel bracket with axial grooved ball bearing DIN 711 and tapered roller
bearing DIN 720 in the swivel head, dust and splash-proof, fitted grease
nipple, bolted and secured with a welded very strong central kingpin.

Bolted wheel axle. Zinc-plated, yellow-passivated, Cr6-free.

Wheels: P/PS series - Tyres: P series: Pneumatic tyres with ribbed or
zig-zag profile, 4 ply rating, black. PS series: Pneumatic tyres with zig-zag
profile, 6, 8 or 10 ply rating, black.

Rims: P series: Made of pressed steel, with tubular steel hub, lacquered,
silver.

PS series: Made of heavy pressed steel, bolted (flat based rim), with
tubular steel hub, zinc-plated, blue-passivated, Cr6-free.

Bearing type: Two pressed-in ball bearings.

Braking capacity is reduced with insufficient tyre pressure.

SWIVEL CASTORS FIXED CASTORS SWIVEL CASTORS MAX LOAD WHEEL OVERALL OFFSET PLATE SIZE HOLE CENTRES & TREAD
WITH WHEEL BRAKE (KG) DIAMETER HEIGHT SWIVEL (mm) HOLE SIZE (mm) PATTERN
x WIDTH (mm) CASTOR (mm) HIGHWAY

(mm)

LS-P-420K BS-P-420K LS-P-420K-RA 525 415 x 115 478 100 200 x 160 160 x 120(14)

SUPER ELASTIC BLACK Welded steel heavy duty castors, strong swivel head design, heavy PREMIUM
RUBBER CASTORS duty wheel with super-elastic solid rubber tyre HEAVY

EXTRATHANE ELASTIC BLACK RUBBER TREAD I STEEL CENTRE Brackets: LS/BS series - Particularly rugged welded steel construction,
swivel bracket with axial grooved ball bearing DIN 711 and tapered roller
bearing DIN 720 in the swivel head, dust and splash-proof, fitted grease
nipple, bolted and secured with a welded very strong central kingpin.

Bolted wheel axle.

Zinc-plated, yellow-passivated, Cr6-free.

Wheels: VLE series - Tyres: With hard rubber core, black.

Wheel Ø 250-306 mm: 2-component tyres, super-elastic, abrasion-
resistant tread.

Wheel Ø 405-525 mm: 3-component tyres, super-elastic cushion layer,
abrasion-resistant tread.

Rims: Made of heavy pressed steel, bolted (flat based rim), with tubular
steel hub or reinforced rim version, zinc-plated, blue-passivated, Cr6-free.

Bearing type: Two pressed-in ball bearings.

SWIVEL FIXED SWIVEL CASTORS SWIVEL CASTORS MAX LOAD WHEEL OVERALL OFFSET PLATE SIZE HOLE CENTRES TREAD
CASTORS CASTORS WITH WHEEL WITH 2 OR 4 WAY (KG) DIAMETER HEIGHT SWIVEL (mm) & HOLE SIZE PATTERN
BRAKE DIRECTIONAL LOCK x WIDTH (mm) CASTOR (mm)
(mm)
(mm)

LS-VLE312K BS-VLE312K LS-VLE312K-RA LS-VLE312K-R14 700 306 x 105 358 85 200 x 160 160 x 120(14) LUG

LS-VLE410K BS-VLE410K LS-VLE410K-RA LS-VLE410K-R14 950 405 x 105 473 100 200 x 160 160 x 120(14) LUG

l 70 l

WHEELS&ROLLERS

CAST IRON WHEEL

CAST IRON TREAD I CAST IRON CENTRE

Made of rugged grey cast iron, machined tread and tread edges, with grease nipple, exceptionally low
rolling and swivel resistance, outstanding wear resistance, lacquered, colour silver.

Bearing types:

»» Plain bore
»» Ball bearing: Two pressed-in ball bearings lubricated with long life grease
Operating temperature:

»» Plain bore version: -100°C to +600°C
»» Ball bearing version: -25°C to +120°C
For plain bore versions, a temperature specific grease must be regularly applied.

The relatively high floor pressure should be considered for pressure-sensitive floors.

WHEEL CODE LOAD WHEEL DIAM WHEEL BEARING HUB LENGTH BORE BORE
CAPACITY x WIDTH TYPE (mm) DIAMETER DIAMETER
G80/12G (mm) WITH SPACER
G100/15G (KG) (mm)
G125/15G 250 8
G127/20G 400 80 x 25 PLAIN BORE 35 12 8 OR 10
G150/20G 450 100 x 35 PLAIN BORE 45 15 8 OR 10
G200/20G 750 125 x 35 PLAIN BORE 45 15
900 125 x 50 PLAIN BORE 60 20 1/2"
1100 150 x 50 PLAIN BORE 60 20 1/2"
200 x 50 PLAIN BORE 60 20 1/2'

WHEEL CODE LOAD WHEEL DIAM WHEEL BEARING HUB LENGTH BORE BORE
CAPACITY x WIDTH TYPE (mm) DIAMETER DIAMETER
G100/15K (mm) WITH SPACER
G125/15K (KG) (mm)
G127/20K 10 TOP HAT
G150/20K 400 100 x 35 BALL BEARING 40 15 8 OR 10
G200/20K 450 125 x 35 BALL BEARING 45 15 1/2'
750 125 x 50 BALL BEARING 60 20 1/2'
900 150 x 50 BALL BEARING 60 20 1/2'
1100 200 x 50 BALL BEARING 60 20

l 71 l

FOR PREMIUM HEAVY
DUTY OR MOUNT ON
STUB AXLE

EXTRATHANE POLYURETHANE WHEEL LIGHT

EXTRATHANE POLYURETHANE TREAD I ALUMINIUM CENTRE MEDIUM

Heavy duty wheel with Blickle Extrathane® polyurethane tread, with aluminum wheel centre HEAVY

Wheels: Made of high-quality, reaction-injected polyurethane-elastomer Blickle Extrathane®, low-noise
operation, low rolling resistance, good floor preservation, very high abrasion resistance, high cut and tear
propagation resistance, very good chemical connection with the wheel centre.

Tread: Made of high-quality polyurethane-elastomer Blickle Extrathane®.

Wheel centre/rim: Made of die-cast aluminum. Casted tread.

WHEEL CODE LOAD WHEEL DIAM WHEEL HUB BORE BORE
CAPACITY x WIDTH BEARING TYPE LENGTH DIAMETER DIAMETER
ALTH101/15K (mm) WITH SPACER
ALTH150/20K (KG) BALL BEARING (mm) (mm)
ALTH200/20K 100 x 40 BALL BEARING 10
350 150 x 50 BALL BEARING 40 15 1/2"
500 200 x 50 60 20 1/2"
800 60 20

EXTRATHANE POLYURETHANE WHEEL

EXTRATHANE POLYURETHANE TREAD I CAST IRON CENTRE (GTH) OR STEEL CENTRE (VSTH)

Heavy duty wheel with Blickle Extrathane® polyurethane tread, with cast iron wheel centre

Wheels: Made of high-quality, reaction-injected polyurethane-elastomer Blickle Extrathane®, low-noise
operation, low rolling resistance, good floor preservation, very high abrasion resistance, high cut and tear
propagation resistance, very good chemical connection with the wheel centre.

Tread/tyre: Made of high-quality polyurethane-elastomer Blickle Extrathane®.

Wheel centre/rim: Made of gray cast iron, lacquered (GTH) or steel centre (VSTH)

LOAD WHEEL DIAM HUB BORE BORE PREMIUM
CAPACITY x WIDTH LENGTH DIAMETER DIAMETER WHEELS
(mm) WITH SPACER
WHEEL CODE (KG) WHEEL (mm) (mm)
35 x 27 BEARING TYPE N/A
VSTH35/6K 100 50 X 33 30 6 N/A
VSTH50/8K 150 65 X 40 BALL BEARING 35 8 N/A
VSTH65/15K 250 100 x 50 BALL BEARING 40 15 1/2"
GTH101/20K 500 125 x 40 BALL BEARING 60 20 10 TOP HAT
GTH125/15K 500 125 x 50 BALL BEARING 45 15 1/2"
GTH127/20K 600 150 x 50 BALL BEARING 60 20 1/2"
GTH150/20K 750 200 x 50 BALL BEARING 60 20 1/2"
GTH200/20K 1000 200 x 80 BALL BEARING 60 20 16 TOP HAT
GTH202/25K 1600 250 x 80 BALL BEARING 90 25 20 TOP HAT
GTH252/30K 1800 300 x 100 BALL BEARING 90 30 24 TOP HAT
GTH304/35K 3000 360 x 120 BALL BEARING 120 35 24 TOP HAT
GTH364/40K 3800 400 x 125 BALL BEARING 120 40 24 TOP HAT
GTH406/50K 5000 BALL BEARING 125 50
BALL BEARING

l 72 l

WHEELS&ROLLERS

IMPACT RESISTANT CAST NYLON

IMPACT RESISTANT NYLON TREAD I IMPACT RESISTANT NYLON CENTRE

Made of high-quality, impact-resistant, hard and tough, highly compressed cast nylon with extremely
high load capacity, 80° shore D hardness, very low rolling and swivel resistance, smooth running
performance on even floors, high abrasion resistance, colour natural beige.

Bearing types:

• Ball bearing: Two pressed-in ball bearings, lubricated with long-life grease.

• Spherical roller bearing: Two pressed-in spherical roller bearings, sealed, extremely rugged, very
durable, lubricated with long-life grease.

Other features:

High chemical resistance to many aggressive substances.

Operating temperature: -25° C to +80° C. At ambient temperatures above +35° C the load capacity
is reduced. The relatively high floor pressure should be considered for pressure-sensitive floors.

Maintenance-free under standard conditions.

WHEEL CODE LOAD WHEEL DIAM WHEEL BEARING HUB BORE BORE
CAPACITY x WIDTH TYPE LENGTH DIAMETER DIAMETER
GSPO35/8K (mm) WITH SPACER
GSPO80/20K (KG) (mm) (mm)
GSPO100/20K 6
GSPO125/25K 100 35 x 28 BALL BEARING 28 8 10 TOP HAT
GSPO150/30K 1000 80 x 40 BALL BEARING 45 20 10 TOP HAT
GSPO200/35K 1250 100 x 40 BALL BEARING 45 20 12 TOP HAT
GSPO202/45K 2000 125 x 55 BALL BEARING 60 25 16 TOP HAT
GSPO250/45K 2500 150 x 55 BALL BEARING 60 30 16 TOP HAT
GSPO252/50K 3000 200 x 55 BALL BEARING 60 35 24 TOP HAT
GSPO300/55K 4500 200 x 80 BALL BEARING 90 45 24 TOP HAT
5000 250 x 65 BALL BEARING 70 45 24 TOP HAT
6000 250 x 80 BALL BEARING 90 50 24 TOP HAT
7000 300 x 80 BALL BEARING 90 55

l 73 l

FOR PREMIUM HEAVY
DUTY OR MOUNT ON
STUB AXLE

BESTHANE POLYURETHANE WHEEL LIGHT

BESTHANE POLYURETHANE TREAD I ALUMINIUM CENTRE MEDIUM

Heavy duty wheel with Blickle Besthane® polyurethane tread, with aluminum wheel centre HEAVY

Wheels: Made of high-quality, reaction-injected polyurethane-elastomer Blickle Besthane®, low-noise
operation, very low rolling resistance, high dynamic load capacity, good floor preservation, very high
abrasion resistance, high cut and tear propagation resistance, very good chemical connection with the
wheel centre.

Tread/tyre: Made of high-quality polyurethane-elastomer Blickle Besthane®, high dynamic load
capacity.

Wheel centre/rim: Made of die-cast aluminum. Casted tread.

WHEEL CODE LOAD WHEEL DIAM WHEEL HUB BORE BORE
CAPACITY x WIDTH BEARING TYPE LENGTH DIAMETER DIAMETER
ALB101/15K (mm) WITH SPACER
ALB125/15K (KG) BALL BEARING (mm) (mm)
ALB160/20K 100 x 40 BALL BEARING 10
ALB200/20K 350 125 x 40 BALL BEARING 40 15 10
350 160 x 50 BALL BEARING 45 15 1/2”
550 200 x 50 60 20 1/2"
800 60 20

BESTHANE POLYURETHANE WHEEL PREMIUM
WHEELS
BESTHANE POLYURETHANE TREAD I CAST IRON CENTRE

Heavy duty wheel with Blickle Besthane® polyurethane tread, with cast iron wheel centre

Wheels: Made of high-quality, reaction-injected polyurethane-elastomer Blickle Besthane®, low-noise
operation, very low rolling resistance, high dynamic load capacity, good floor preservation, very high
abrasion resistance, high cut and tear propagation resistance, very good chemical connection with the
wheel centre.

Tread/tyre: Made of high-quality polyurethane-elastomer Blickle Besthane®, high dynamic load
capacity.

Wheel centre/rim: Made of gray cast iron, with grease nipple, lacquered. Casted tread.

WHEEL CODE LOAD WHEEL DIAM WHEEL BEARING HUB BORE BORE
GB154/25K CAPACITY x WIDTH TYPE LENGTH DIAMETER DIAMETER
(mm) WITH SPACER
(KG) 150 x 80 BALL BEARING 80 25 16 TOP HAT
1050

l 74 l

WHEELS&ROLLERS

SUPER ELASTIC BLACK
RUBBER WHEEL

ELASTIC BLACK RUBBER TREAD I STEEL CENTRE

Heavy duty wheel with super-elastic solid rubber tyre.

Wheels: Made of super-elastic solid rubber, tough and hard rubber core, steel-wire reinforced, very high
operational comfort, good floor preservation.

Tread/tyre: 3-component tyres with highly elastic damping ring, abrasion-resistant tread.

Wheel centre/rim: Pressed steel rim, pressed and bolted, with welded tubular steel hub, zinc-plated, blue-
passivated, Cr6-free.

WHEEL CODE LOAD WHEEL DIAM HUB BORE BORE TREAD
CAPACITY x WIDTH WHEEL BEARING TYPE LENGTH DIAMETER DIAMETER PATTERN
(mm) (mm) WITH SPACER
(KG) (mm)

VLE307/25-75K 700 306 X 105 BALL BEARING 75 25 16 TOP HAT R50

VLE312/25-75K 700 306 X 105 BALL BEARING 75 25 16 TOP HAT B50
VLE405/25-90K 950 405 X 105 BALL BEARING 90 25 16 TOP HAT R50

*LOAD CAPACITIES ARE SUITABLE FOR SPEEDS UP TO 6KPH. PLEASE CHECK FOR CAPACITIES WHERE SPEEDS EXCEED 6KPH

R50 B50

PNEUMATIC WHEEL

PNEUMATIC TREAD I STEEL CENTRE

Heavy duty wheel with super-elastic solid rubber tyre.

Wheels: Pneumatic tyre with tube, outstandingly high operational comfort, exceptionally high floor
preservation, PAH conform acc. to EU directive 2005/69/EC.

Tread/tyre: Pneumatic tyre with ribbed profile.

Wheel centre/rim: Made of pressed steel, with tubular steel hub, zinc-plated, blue-passivated, Cr6-free.
Tyre mounted on rim.

WHEEL CODE LOAD WHEEL DIAM WHEEL BEARING TYPE HUB BORE BORE TREAD
CAPACITY x WIDTH (mm) LENGTH DIAMETER DIAMETER PATTERN
WITH SPACER
(KG) (mm) (mm)

P420/25-90K 525 415 X 115 BALL BEARING 90 25 16 TOP HAT R01

*LOAD CAPACITIES ARE SUITABLE FOR SPEEDS UP TO 4KPH. PLEASE CHECK FOR CAPACITIES WHERE SPEEDS EXCEED 4KPH

l 75 l

FOR PREMIUM HEAVY
DUTY OR MOUNT ON
STUB AXLE

BESTHANE POLYURETHANE LIGHT
DRIVE WHEEL
MEDIUM
BESTHANE POLYURETHANE TREAD I CAST IRON CENTRE

Heavy duty drive wheels with hub keyway, with Blickle Besthane® polyurethane tread and cast HEAVY
iron wheel centre

Wheels: Made of high-quality, reaction-injected polyurethane-elastomer Blickle Besthane®, low-
noise operation, very low rolling resistance, high dynamic load capacity, good floor preservation,
very high abrasion resistance, high cut and tear propagation resistance, very good chemical
connection with the wheel centre.

Tread/tyre: Made of high-quality polyurethane-elastomer Blickle Besthane®, high dynamic load
capacity.

Wheel centre/rim: Made of gray cast iron, plain bore keywayed acc. to DIN 6885, lacquered.

WHEEL CODE LOAD WHEEL DIAM WHEEL BEARING HUB BORE KEYWAY
GBN304/50H7 CAPACITY x WIDTH TYPE LENGTH DIAMETER WIDTH X
(mm) HEIGHT
(KG) 50 H7 14 JS9 X 53.8
2700 300 X 100 KEY WAY PLAIN BORE 100

EXTRATHANE POLYURETHANE PREMIUM
DRIVE WHEEL WHEELS

EXTRATHANE POLYURETHANE TREAD I CAST IRON CENTRE

Heavy duty drive wheels with hub keyway, with Blickle Extrathane® polyurethane tread and cast iron
wheel centre

Wheels: Made of high-quality, reaction-injected polyurethane-elastomer Blickle Extrathane®, low-noise
operation, low rolling resistance, good floor preservation, very high abrasion resistance, high cut and
tear propagation resistance, very good chemical connection with the wheel centre.

Tread/tyre: Made of high-quality polyurethane-elastomer Blickle Extrathane®.

Wheel centre/rim: Made of gray cast iron, plain bore keywayed acc. to DIN 6885, lacquered.

LOAD WHEEL DIAM HUB BORE KEYWAY
WHEEL CODE CAPACITY x WIDTH WHEEL BEARING TYPE LENGTH DIAMETER WIDTH x
(mm) (mm) HEIGHT
GTHN150/25H7 (KG) 25 H7
GTHN200/25H7 150 x 50 KEY WAY PLAIN BORE 60 25 H7 8 JS9 x 28.3
GTHN202/35H7 650 200 x 50 KEY WAY PLAIN BORE 60 35 H7 8 JS9 x 28.3
GTHN252/40H7 900 200 x 80 KEY WAY PLAIN BORE 80 40 H7 10 JS9 x 28.3
GTHN302/40H7 1400 250 x 80 KEY WAY PLAIN BORE 80 40 H7 12 JS9 x 43.3
GTHN302/50H7 1600 300 x 80 KEY WAY PLAIN BORE 80 50 H7 12 JS9 x 43.3
2100 300 x 80 KEY WAY PLAIN BORE 80 14 JS9 x 53.8
2100

l 76 l

WHEELS&ROLLERS

EXTRATHANE POLYURETHANE
PALLET JACK ROLLER

EXTRATHANE POLYURETHANE TREAD I STEEL CENTRE
Rollers for pallet trucks with Blickle Extrathane® polyurethane tread, with steel wheel centre

Wheels: Made of high-quality, reaction-injected polyurethane-elastomer Blickle Extrathane®, low-
noise operation, low rolling resistance, good floor preservation, very high abrasion resistance, high
cut and tear propagation resistance, very good chemical connection with the wheel centre.

Tread/tyre: Made of high-quality polyurethane-elastomer Blickle Extrathane®.

Wheel centre/rim: Made of steel

WHEEL CODE LOAD WHEEL DIAM WHEEL BEARING TYPE HUB BORE
CAPACITY x WIDTH LENGTH DIAMETER
HTH75X40/20-40K (mm)
HTH80X54/20-54K (KG) 20
HTH82X50/20-52K 75 X 40 BALL BEARING 40 20
HTH82X70/20-70K 270 80 X 54 BALL BEARING 54 20
HTH82X98/20-98K 380 82 X 50 BALL BEARING 52 20
HTH85X75/20-75K 360 82 X 70 BALL BEARING 70 20
510 82 X 98 BALL BEARING 98 20
720 85 X 75 BALL BEARING 75
570

l 77 l

FOR PREMIUM HEAVY
DUTY OR MOUNT ON
STUB AXLE

EXTRATHANE POLYURETHANE LIGHT
PALLET JACK ROLLER -
SPLASH PROOF MEDIUM

EXTRATHANE POLYURETHANE TREAD I STEEL CENTRE HEAVY

Rollers for pallet trucks with Blickle Extrathane® polyurethane tread, with steel wheel centre, splash and
washproof version

Wheels: Made of high-quality, reaction-injected polyurethane-elastomer Blickle Extrathane®, low-noise
operation, low rolling resistance, good floor preservation, very high abrasion resistance, high cut and tear
propagation resistance, very good chemical connection with the wheel centre.

Tread/tyre: Made of high-quality polyurethane-elastomer Blickle Extrathane®.

Wheel centre/rim: Made of steel

WHEEL CODE LOAD WHEEL DIAM WHEEL BEARING TYPE HUB BORE
CAPACITY x WIDTH LENGTH DIAMETER
HTHW82X60/20-64K (mm)
HTHW85X95/20-100K (KG) 20
440 82 x 60 BALL BEARING 64 20
720 85 x 95 BALL BEARING 100

NYLON PALLET JACK ROLLER

NYLON TREAD I STEEL CENTRE

Nylon roller for pallet trucks

Wheels: Made of high-quality, impact-resistant nylon, very low rolling resistance, smooth running
performance on even floors, very high abrasion resistance.

Tread/tyre: Made of high-quality, impact-resistant nylon.

WHEEL CODE LOAD WHEEL DIAM WHEEL BEARING TYPE HUB BORE PREMIUM
CAPACITY x WIDTH LENGTH DIAMETER WHEELS
HPO82X100/20-100K (mm)
HPO85X100/20-100K (KG) 20
1000 82 x 100 BALL BEARING 100 20
1100 85 x 100 BALL BEARING 100

l 78 l

SCAFFOLDING 700KGM A X LO A D R AT I N G

»» Wheel diameter - 200mm +OPTIONS
»» Threaded stem - 38 x 300 | 400 | 500mm long
»» TPU tread, nylon centre wheel
»» Meets EN1004 & AS/NZS 1576.2.2009

NYLON STOPPER ADJUSTABLE NUT
SLEEVE

WHEEL FRAME CODE MAX LOAD WHEEL TREAD WHEEL CENTRE OVERALL SWIVEL STEM DIAMETER STEM HEIGHT
DIAMETER (KG) MATERIAL MATERIAL HEIGHT (mm) RADIUS (mm) (mm) (mm)

(mm)

SC200200D-T300/38B4 38 300
200 SC200200D-T400/38B4 700 POLYURETHANE NYLON 241 140 400
500
SC200200D-T500/38B4

SCAFFOLDING ACCESSORIES

PRODUCT CODE DESCRIPTION
SCADJNUTJ2 Scaffolding adjustable nut, suits 38mm threaded stem, 76mm spigot
SCADJNUTJ3 Scaffolding adjustable nut, suits 38mm threaded stem,76mm spigot, 44mm machined collar
SCBUSH41.5X100 Plastic sleeve suit 38mm threaded stem 41.5 ODx 100 long
SCBUSH44.5X100 Plastic sleeve suit 38mm threaded stem 44.5 OD x 100 long
SCSTOP42.5X50.5 Plastic stopper suit 38mm threaded stem 42.5 OD
SCSTOP45.5X50.5 Plastic stopper suit 38mm threaded stem 45.5 OD

l 79 l

JACKINGCASTORS 1000KGM A X L O A D R A T I N G

JC-SW-SAS-6 JA-SAS-8 LIGHT

»» Side winding »» Top winding MEDIUM
»» Side mounting »» Side mounting
»» Up to 200 mm lift travel »» Up to 85mm lift travel
»» Robust all steel construction »» Premium heavy duty model
»» Zinc coated finish »» Black polymer finish
»» Includes premium polyurethane castor (150mm standard) »» Includes polyurethane on cast iron wheel (200mm standard)

HEAVY

WHEEL MOUNTING TYPE FRAME CODE TREAD MATERIAL MAX LOAD HEIGHT FULLY HEIGHT FULLY SWIVEL
DIAMETER (mm) (KG) RETRACTED EXTENDED (mm) RADIUS (mm)

(mm)

150 JC-SW-SAS-6 POLYURETHANE 750 820 620 135

SIDE PLATE

200 JA-SAS-8 POLYURETHANE 1000 620 535 160

SAS SPECIALISED
CASTORS
»» Premium polyurethane compound 93 Shore A (+/- 3)

»» Firmly bonded to machined cast iron core

»» Low rolling resistance, smooth non marking

l 80 l

STAIRCLIMBINGCASTOR 130KGMAX LOAD RATING

FEATURES

»» Stairclimbing function suitable for specialised handtruck
»» Wheels, frame and spacers can be sold separately
»» PRODUCT CODE SPACER LWPHSPACER10.5
»» PRODUCT CODE WHEEL LWPH160SW
»» PRODUCT CODE FRAME ONLY+AXLE BOLTS LWPHFRAME

COMMON USES

»» Handtrucks

AXLE SIZE LWPH160

»» Mounts on axle using 20mm roller bearing.

»» Overall swept diameter of assembled
carriage is 367mm.

WHEEL MOUNTING TYPE COMPLETE WHEEL TYPE MAX LOAD
DIAMETER (mm) ASSEMBLY CODE (KG)

160 3 WHL CARRIAGE, LWPH160 BLACK 130
AXLE MOUNTED RUBBER

LWPH160SW LWPHSPACER10.5

l 81 l

P SERIESCASTORS 200KGM A X LOA D R ATI NG

PNEUMATIC CASTORS FOAM FILLED CASTORS LIGHT

»» Great for external use over rough, uneven & soft surfaces »» Great for external use over rough, uneven & soft surfaces MEDIUM

»» Rugged robust wheels for tough applications »» Rugged robust wheels for tough applications HEAVY

»» Good shock / impact absorbency »» Good shock / impact absorbency

PLEASE NOTE: The air pressure supports the load - under-inflated tyres »» No more punctures
can result in damage to the tyres/tube/rim and potential injury to the
operator or bystanders. Tyres pressures and load ratings stated in this PLEASE NOTE - Foam filled tyres can flat spot under load and when left
catalogue are the maximum recommended for all usage conditions with stationary in hot conditions. The PU foam has a memory and will return to
speeds up to 12kph. shape.
Please consult with our representative for loads/speeds in excess of
those stated or where operating conditions are of an extreme nature.

RIGID SWIVEL WHEEL LOCKING PLATE SIZE
»» 115mm x 100mm.
»» Hole Centres: 85mm x 72mm.

WHEEL MOUNTING TYPE FRAME CODE WHEEL TYPE MAX LOAD OVERALL HEIGHT SWIVEL
DIAMETER (mm) (KG) (mm) RADIUS (mm)

220 PZF250X4-PS PNEUMATIC 120 257 N/A

265 PZF350X4-PS PNEUMATIC 160 320 N/A

220 PZN250X4-PS PNEUMATIC 120 257 157

265 PZN350X4-PS PNEUMATIC 160 320 187

220 PZNW250X4-PS PNEUMATIC 120 257 157

265 PZNW350X4-PS PNEUMATIC 160 320 187 SPECIALISED
CASTORS
220 PZF250X4-FS FOAM FILLED 75 257 N/A

265 PZF350X4-FS FOAM FILLED 100 320 N/A

220 PZN250X4-FS FOAM FILLED 75 257 157

265 PZN350X4-FS FOAM FILLED 100 320 187 PNEUMATIC
& FOAM
220 PZNW250X4-FS FOAM FILLED 75 257 157

265 PZNW350X4-FS FOAM FILLED 100 320 187

l 82 l

PNEUMATIC WHEELS

GENERAL INFORMATION

Pneumatic wheels are ideal for moving loads over rough and uneven surfaces.
The tyres tread provides the wearing surface and grip, the tyres carcass and
tube contain the compressed air and are flexible allowing for impact absorption
and the wheel rim supports the whole assembly.

THINGS TO REMEMBER WHEN USING PNEUMATIC WHEELS:
»» Check and maintain the correct air pressure (recommended pressure is
normally branded on the side of the tyres)

»» Under-inflated tyres can cause a load to become unstable and will damage
the tyres and tube- it’s the air pressure that supports the load

»» Ply rating is a “strength” rating – it does not mean that there are 4 layers of
ply in a 4 ply tyres for example. The higher the ply rating - the greater the load
capacity

QHDC pneumatic wheels are chosen for their quality and suitability for
tough Australian conditions

ONE PIECE STEEL RIM -Heavy gauge steel RIB LUG UNIVERSAL
construction with high quality powder coat STUD KNOBBY
finish.

TWO PIECE STEEL RIM - Heavy gauge steel
construction, high quality powder coat finish.

DIAMOND

ONE PIECE POLYPROPYLENE RIM

TURF

l 83 l

STEEL RIM 360KGM AFXO RLROIASNDCDRUOASOTTITRNEIGARLS, , LIGHT
MG AORBDIELNI ,T AY T VD E&V I C E S
ONE AND TWO PIECE &G EWN EHREAELL PCUHRAPIORSSE

* When ordering wheels with alternative bearings the code ends in, for example: F34 for 3/4” MEDIUM
flange bearing, P34 for 3/4” 2RS, or N34 for 3/4 nylon bush.
NOTE: Codes starting PS2 are a two piece steel rim.

HEAVY

PRODUCT CODE TYRE SIZE/PLY TREAD TYRE DIAMETER x HUB x BORE STANDARD ALTERNATIVE ALTERNATIVE LOAD
RATING PATTERN PRESSURE WIDTH BEARING BEARING BUSHING RATING
SIZES SIZES (KG @
(PSI) 8 KMH)

xx SEE ABOVE FOR CODE
VARIATIONS WHEN ORDERING
ALTERNATIVE BEARINGS AND

BUSHING*

PSLUG250X4F20 2.50-4 4PR LUG 35 220 X 60 60 X 20 FLANGED BALL 120
35 220 X 60 60 X 20 FLANGED BALL 120
PSUNI250X4F20 2.50-4 4PR UNIVERSAL 50 260 X 80 60 X 20 FLANGED BALL 140
50 265 X 85 60 X 20 FLANGED BALL 160
PSDMD300X4F20 3.00-4 4PR DIAMOND 35 365 X 83 80 X 3/4 FLANGED BALL 1/2" ID, 1/2" ID, 220
PSSTUD350X4F20 4.10/3.50-4 STUD 50 5/8"ID, 5/8"ID, 3/4" 160
PSUNI300X8F34 35 3/4" ID, ID, 20mm, 140
PSKNO350X4F20 4PR UNIVERSAL 35 20mm 200
PSUNI250X6F01 3.00-8-4PR KNOBBY 30 1" ID 220
PSSTUD350X6F01 4.10/3.50-4 35 220
PSTUR13X500-6F01 UNIVERSAL 35 265 X 85 60 X 20 FLANGED BALL 220
PSSTUD400X8F01 4PR STUD 72 275 X 60 360
PSKNO400X8F01 2.50-6 4PR TURF 30 60 X 25.4 (1") FLANGED BALL 230
PSHWY400X8F01 4.10/3.50-6 STUD 35 120
PSTUR16X650-8F01 35 320 X 85 60 X 25.4 (1") FLANGED BALL FLANGE N/A 120
4PR KNOBBY 50 325 X 120 60 X 25.4 (1") FLANGED BALL 5/8", 3/4", 140
13X5.00-6 4PR HIGHWAY 50 400 X 100 80 X 25.4 (1") FLANGED BALL 160
50 400 X 100 80 X 25.4 (1") FLANGED BALL 20MM, 160
4.80/4.00-8 TURF 35 400 X 100 80 X 25.4 (1") FLANGED BALL 25.4MM. 140
4PR 35 200
35 2RS 220
4.80/4.00-8 35 20MM, 220
4PR 25MM,
25.4MM l 84 l
4.80/4.00-8-
6PR 410 X 160 150 X 25.4 (1") FLANGED BALL
220 X 60
16X6.50-8 4PR 220 X 60
260 X 80
PS2LUG250X4F20 2.50-4 4PR LUG 60 X 20 FLANGED BALL

PS2UNI250X4F20 2.50-4 4PR UNI 60 X 20 FLANGED BALL

PS2DMD300X4F20 3.00-4 4PR DIAMOND 60 X 20 FLANGED BALL 1/2" ID, 1/2" ID, PNEUMATIC
PS2STUD350X4F20 STUD 5/8"ID, 5/8"ID, & FOAM
PS2KNO350X4F20 4.10/3.50-4 265 X 85 60 X 20 FLANGED BALL 3/4" ID, 3/4" ID,
PS2UNI250X6F20 4PR KNOBBY 20MM 20MM, 1" ID
PS2STUD350X6F01 UNIVERSAL
PS2STUD400X8F20 4.10/3.50-4 265 X 85 60 X 20 FLANGED BALL
PS2KNO400X8F01 4PR STUD 275 X 60
STUD 320 X 85 60 X 25.4 (1") FLANGED BALL FLANGE N/A
2.50-6 4PR KNOBBY 400 X 100 60 X 25.4 (1") FLANGED BALL 5/8", 3/4",
400 X 100 80 X 25.4 (1") FLANGED BALL
4.10/3.50-6 80 X 25.4 (1") FLANGED BALL 20MM,
4PR 25.4MM.

4.80/4.00-8 2RS
4PR 20MM,
25MM,
4.80/4.00-8 25.4MM
4PR

PNEUMATICWHEELS 150KGMA X LOAD R ATING

POLYPROPYLENE RIM

ONE AND TWO PIECE
* When ordering wheels with alternative bearings the code
ends in, for example: F34 for 3/4” flange bearing, P34 for
3/4”, 2RS, or N34 for 3/4 nylon bush.
These rims contain UV inhibitors to combat the harsh
Australian sun.

PRODUCT CODE TYRE SIZE/PLY TREAD TYRE DIAMETER x HUB x BORE STANDARD ALTERNATIVE ALTERNATIVE LOAD
RATING PATTERN PRESSURE WIDTH BEARING BEARING BUSHING RATING
PPRIB200-50P08 x SIZES SIZES
PPLUG250X4F20 200 X 50 (PSI) x SEALED 80
PPUNI250X4F20 2.50-4 4PR 50 X 8 PRECISION 100
PPDMD300X4F20 2.50-4 4PR 200 X 50 60 X 20 FLANGED BALL SEE ABOVE FOR CODE 100
PPSTUD350X4F20 3.00-4 4PR 220 X 60 VARIATIONS WHEN ORDERING 120
PPKNO350X4F20 4.10/3.50-4 4PR 220 X 60 ALTERNATIVE BEARINGS AND 140
PPSTUD350X6F20 4.10/3.50-4 4PR 260 X 80 140
PPSTUD400X8F01(P) 4.10/3.50-6 4PR 265 X 85 BUSHING* 150
PPKNO400X8F01(P) 4.80/4.00-8 4PR 265 X 85 150
PPTUR650X8F01 4.80/4.00-8 4PR RIB 35 320 X 85 N/A N/A 150
16X6.50-8 4PR LUG 35 400 X 100 150
UNIVERSAL 35 400 X 100 N/A
DIAMOND 50 410 X 160
STUD 50 60 X 20 FLANGED BALL 1/2" ID, N/A
KNOBBY 50 60 X 20 FLANGED BALL 5/8"ID, N/A
STUD 35 60 X 20 FLANGED BALL 3/4" ID, N/A
STUD 35 60 X 20 FLANGED BALL 20MM N/A
KNOBBY 35
TURF 30 70 X 20 FLANGED BALL N/A

80 X 25.4 FLANGED BALL FLANGE 5/8", 3/4", 1"
80 X 25.4 FLANGED BALL 3/4", 20MM
104 X 25.4 FLANGED BALL
2RS
25MM

l 85 l

FOAM FILLEDWHEELS 220KGM AFXO RLOIANDD RUASTTIRNIGA L ,
GARDEN, ATV &
GENERAL PURPOSE

STEEL RIM LIGHT

TWO PIECE MEDIUM

Puncture-free foam filled wheels are ideal for moving loads over rough and HEAVY
uneven surfaces where there is potential for sharp objects to penetrate
the tyres, or where regular maintenance checks are not easy. The tyres
tread provides the wearing surface and grip, the tyres carcass contains
the polyurethane foam fill with combined flexibility to absorb impacts. The
2-piece wheel rim supports the whole assembly.

THINGS TO NOTE WHEN USING FOAM FILLED WHEELS:

»» Do not load these wheels beyond recommended load capacities

»» Remove nails and objects penetrating the tyres when visible to avoid
further damage – the tyres won’t go flat

»» Where possible avoid leaving under heavy load for longer periods – these
tyres will flat spot for a while until the foam fill recovers it’s shape – PU foam
does have a memory

QHDC Puncture-Free foam filled-wheels are chosen for their quality and
suitability for tough Australian conditions

PRODUCT CODE TYRE SIZE/ TREAD TYRE DIAMETER x HUB x BORE STANDARD ALTERNATIVE ALTERNATIVE LOAD RATING
PLY RATING PATTERN PRESSURE WIDTH BEARING BEARING BUSHING
x SIZES SIZES 50
(PSI) x FLANGED BALL 75
60 X 20 FLANGED BALL 100
191 X 60 60 X 20 FLANGED BALL SEE BELOW FOR CODE 90
220 X 60 60 X 20 FLANGED BALL VARIATIONS WHEN ORDERING 100
265 X 85 60 X 25.4 (1") FLANGED BALL ALTERNATIVE BEARINGS AND 120
275 X 60 60 X 25.4 (1") FLANGED BALL
320 X 85 80 X 25.4 (1") BUSHING*
400 X 100
FSRIB200-50GF20 200-50 RIB N/A 1/2", 5/8", N/A
N/A 3/4", 20mm N/A
FSLUG250X4F20 2.50-4 LUG N/A 1/2", 5/8", N/A
FSSTUD350X4F20 N/A 3/4", 20mm
FSUNI250X6F01 4.10/3.50- STUD N/A 1/2", 5/8",
FSSTUD350X6F01 4 N/A 3/4", 20mm
FSKNO400X8F01
2.50-6 UNIVERSAL FLANGE 5/8”,
3/4”, 20mm
3.50-6 STUD N/A
4.80/4.00- KNOBBY 2RS
20mm,
8 25mm,
25.4mm

* When ordering wheels with alternative bearings the code ends in, for
example: F34 for 3/4” flange bearing, P34 for 3/4” precision bearing.

PNEUMATIC
& FOAM

l 86 l

GENERAL TYRES

BLACK PNEUMATIC TYRES

ITEM CODE TREAD PATTERN TYRE SIZE PLY A good range of small pneumatic tyres is available for a wide range
RATING of applications.

2.50-4-4PR-LUG LUG 2.50-4 4 50 Recommended loads and tyres pressures are branded on the
50 side wall of each tyres - Please check with a member of our
50 sales team for more details.
50
2.50-4-4PR-UNI UNIVERSAL 2.50-4 4 50
30
2.50-6-4PR-IND INDUSTRIAL 2.50-6 4 50
35
2.50-6-4PR-UNI UNIVERSAL 2.50-6 4 50
50
2.50-8-4PR-UNI UNIVERSAL 2.50-8 4 50
50
3.00/3.50-8-4PR-IND INDUSTRIAL 3.00/3.50-8 4 35 ABILITY BLACK DIAMOND HIGHWAY
50
3.00-4-4PR-DMD DIAMOND 3.00-4 4 50
50
3.00-8-4PR-UNI UNIVERSAL 3.00-8 4 35
50
4.10/3.50-4-4PR-KNO KNOBBY 4.10/3.50-4 4 72
50
4.10/3.50-4-4PR-SAW SAW 4.10/3.50-4 4 22 INDUSTRIAL KNOBBY LUG
46
4.10/3.50-4-4PR-SLICK SLICK 4.10/3 4 40
35
4.10/3.50-4-4PR-STUD STUD 4.10/3.50-4 4 35
28
4.10/3.50-6-4PR-KNO-B ABILITY BLACK 4.10/3.50-6 4 28 RIB SAW SSLICKCK
28
4.10/3.50-6 4PR-STUD STUD 4.10/3.50-6 4 30

4.80/4.00-8-4PR-IND INDUSTRIAL 4.80/4.00-8 4

4.80/4.00-8-4PR-KNO KNOBBY 4.80/4.00-8 4

4.80/4.00-8-4PR-STUD STUD 4.80/4.00-8 4 STUD UNIVERSAL

4.80/4.00-8-6PR-DMD DIAMOND 4.80/4.00-8 6

4.80/4.00-8-6PR-HWY-HS HIGHWAY 4.80/4.00-8 6 RECOMMENDED TYRE PRESSURE

9X3.50-4-4PR-TUR TURF 9X3.50-4 4

11X4.00-4-2PRT-TURF TURF 11X4.00-4 2

11X4.00-5-4PR-RIB RIB 11X4.00 4

12-1/2X2-1/4-UN UNIVERSAL 12-1/2X2-1/4 2

13X5.00-6-4PRT-TUR TURF 13X5.00-6 4

13X5.00-6-4PR-TUR TURF 13X5.00-6 4

13X6.50-6-4PRT-SLICK SLICK 13X6.50 4

13X6.50-6-4PRT-TUR TURF 13X6.50-6 4

13X6.50-6-4PR-TURFSAVER TURF 13X6.50-6 4

15X6.00-6-4PRT-TUR TURF 15X6.00-6 4

l 87 l

FOR INDUSTRIAL,
GARDEN, ATV &
GENERAL PURPOSE

BLACK PNEUMATIC TYRES LIGHT

ITEM CODE TREAD PATTERN TYRE SIZE PLY A good range of small pneumatic tyres is available for a wide
RATING range of applications. These tyres are all known brands from
manufacturers who supply markets all around the world. MEDIUM
16X6.50-8-4PR-TUR TURF 16X6.50-8 4 35
24 Recommended loads and tyres pressures are branded on the
16X7.50-8-4PR-K500 K500 16X7.50 4 24 side wall of each tyres - Please check with a member of our
50 sales team for more details.
28
16X7.50-8-4PRT-TUR TURF 16X7.50-8 4 24
22
18.5X8.50-8-6PR-HWY HIGHWAY 18.5X8 6 22 HEAVY
34
18X6.50-8-4PRT-K500TURF SUPER TURF 18X6.50-8 4 5
34
18X7.50-8-4PRT-TURF TURF 18X7.50 4 36
5
18X8.50-10-4PRT-K513 K513 18X8.50 4 24 BEAR KLAW DOMINATOR GOLF CART
22
18X8.50-8-4PRT-GC GOLF CART 18X8.50-8 4 22
5
18X8.50-8-6PRT-TUR SUPER TURF 18X8.50-8 6 32
32
18X9.50-8-2PR-SCORP SCORPION 18.9.50-8 2 7 HIGHWAY K300 K500
34
20X10.00-8-6PR-K500 K500 20X10.00 6 24
7
20X11.00-10-6PRT-KLAW KLAW 20X11.00-10 6 22
7
20X11.00-8-4PR-DOMINAT DOMINATOR 20X11.00-8 4 7
20
20X8.00-10-4PRT-K513 K513 20X8.00 4 35 K513 KLAW MUD CRUSHER
30
20X8.00-8-4PRT-K500 K500 20X8.00 4 70

22X11.00-10-4PR-TURF TURF 22X11.00 4

22X11.00-8-4PRT-K300 K300 22X11.00-8 4

23X10.50-12-6PRT-K500 K500 23X10.50 6 RIB SCORPION SUPER TURF

23X10.50-12-6PRT-LUG TRACTOR LUG 23X10.50-12 6

23X8.00-11-6PLY-MUD MUD CRUSHER 23X8.00-11 6

23X8.50-12-6PRT-K500 K500 23X8.50 6 TERRA TRAC TRACTOR LUG TURF

23X9.50-12-4PRT-K500 K500 23X9.50 4

25X10.00-12-6PLY-MUD MUD CRUSHER 25X10.00-12 6

25X11.00-12-4PR-TERRA TERRA TRAC 25X11.00-12 4 RECOMMENDED TYRE PRESSURE

25X12.50-12-6PLY-BEAR BEAR KLAW 25X12.50-12 6 PNEUMATIC
& FOAM

25X8.00-12-6PR-MUD MUD CRUSHER 25X8.00-12 6

29X12.00-15-TUR TURF 29X12.00 N/A

200-50-4PR-RIB RIB 200-50 4

205/50-10-4PRT-K399 HIGHWAY 205/50-10 4

205/65-10-8PRT-K399 HIGHWAY 205/65-10 8

l 88 l

GENERAL TYRES

NON-MARKING
PNEUMATICS TYRES

ITEM CODE TREAD PATTERN TYRE SIZE PLY
RATING

200-50-4PR-RIB-G SPIRIT (GREY) 200-50 4 36
36
200-50-4PR-RIB-BNM SPIRIT (BLACK) 200-50 4 36 C623 DUROTRAP POWER EDGE
35 SPIRIT
2.50-8-2PR-PLANT-G POWER PLANT 2.50-8 2 36
35 STUD
2.50-8-2PR-TRAP-G DUROTRAP 2.50-8 2 35 UNIVERSAL
55
2.50-8-4PR-PLANT-G POWER PLANT 2.50-8 4 36
36
2.50-8-4PR-TRAP-G DUROTRAP 2.50-8 4 36 POWER EXPRESS POWER PLANT
40
2.80/2.50-4-4PR-RIB-G SPIRIT 2.80/2.50-4 4

2.80/2.50-4-4PR-ZZ-G POWER EDGE 2.80/2.50-4 4

7X1-3/4-4PR-C179-G SPIRIT 7X1-3/4 4 SPIRIT BLACK
RECOMMENDED TYRE PRESSURE
7X1-3/4-4PR-C179-BNM SPIRIT (BLACK) 7X1-3/4 4

12-1/2X2-1/4-KNO-G C623 12-1/2X2-1/4 N/A

12-1/2X2-1/4-PE-G POWER EXPRESS 12-1/2X2-1/4 N/A

BLACK FOAM FILLED

ITEM CODE TREAD TYRE SIZE PLY TYRE TYRE TYRE
PATTERN RATING BEAD DIAMETER WIDTH
WIDTH (mm)
(mm)
2.50-4-4PR-LUG-FOAM LUG 2.50-4-4PR 4 50 60 KNOBBY
2.50-6-UNI-FOAM UNIVERSAL 2.50-6 N/A 50 220 60 LUG
4.10/3.50-4-STUD-FOAM STUD N/A 85 275 85
4.10/3.50-6-STUD-FOAM STUD 4.10/3.50-4 N/A 85 265 85
4.80/4.00-8-KNO-FOAM KNOBBY 4.10/3.50-6 N/A 100 320 100
4.80/4.00-8 400

NON-MARKING FOAM FILLED SPIRIT BLACK
SPIRIT
ITEM CODE TREAD PATTERN TYRE SIZE PLY TYRE TYRE TYRE
RATING BEAD DIAMETER WIDTH
WIDTH (mm)
(mm)

200-50-FF-RIB-G SPIRIT FF 200-50 N/A 31 190 47
4 37 175 44
7X1-3/4-FF-RIB-G(FT37) SPIRIT FF 7X1-3/4 4 37 175 44
46 320 64
7X1-3/4-FF-RIB-BNM(FT37) SPIRIT (BLACK) 7X1-3/4 N/A POWER EXPRESS

12-1/2X2-1/4-FF-PE-G POWER EXPRESS FF 12-1/2X2-1/4

l 89 l

GENERAL TUBES FOR INDUSTRIAL,
GARDEN, ATV &
GENERAL PURPOSE

LIGHT

ITEM CODE TYRE SIZE VALVE TYPE ITEM CODE TYRE SIZE VALVE TYPE

2.50/3.00-4-DIN7777 2.50/3.00-4 BENT METAL VALVE 14X2.75-TR6 14X2.75 STRAIGHT VALVE MEDIUM
2.50/3.00-4-TR13 2.50/3.00-4 STRAIGHT VALVE 15X6.00-6-JS87
2.50-6-JS87 2.50-6 BENT METAL VALVE 15X6.00-6-TR13 15X6.00-6 BENT METAL VALVE
2.50-6-TR13 2.50-6 STRAIGHT VALVE 16X6.50-8-JS87
3.00-10-TR87 3.00-10 BENT METAL VALVE 16X6.50-8-TR13 15X6.00-6 STRAIGHT VALVE
3.00-8-JS87 3.00-8 BENT METAL VALVE 18X6.50-8-TR13
3.00-8-TR13 3.00-8 STRAIGHT RUBBER VALVE 18X8.50/9.50-8-JS87 16X6.50-8 BENT METAL VALVE HEAVY
3.00-8-TR87 3.00-8 BENT METAL VALVE 18X8.50/9.50-8-TR13
3.50/4.00-8-TR13 3.50/4.00-8 STRAIGHT VALVE 18X8.50-8-TR13 16X6.50 STRAIGHT RUBBER VALVE
4.00-5-TR87 4.00-5 BENT METAL VALVE 19X8.00-10-TR13
4.00-8-JS87 4.00-8 BENT METAL VALVE 20X8.00-8-TR13 18X6.50 STRAIGHT RUBBER VALVE
4.10/3.50-4-DIN7777 4.10/3.50-4 BENT METAL VALVE 23X10.50-12-TR13
4.10/3.50-4-TR13 4.10/3.50-4 STRAIGHT VALVE 26X12.00-12-TR13 18X8.50/9.50-8 BENT METAL VALVE
4.10/3.50-5-TR87 4.10/3.50-5 BENT METAL VALVE 200-50-JS87
4.10/3.50-6-JS87 4.10/3.50-6 BENT METAL VALVE 18X8.50/9.50-8 STRAIGHT VALVE
4.10/3.50-6-TR13 4.10/3.50-6 STRAIGHT VALVE
4.10/3.50-6-TR87 4.10/3.50-6 BENT METAL VALVE 18X8.50-8 STRAIGHT VALVE
6X1-1/4-WH767 6X1-1/4 BENT METAL VALVE
8X1-1/4-WH767 8X1-1/4 BENT METAL VALVE 19X8.00-10 STRAIGHT VALVE
9X3.50-4-JS87 9X3.50 BENT METAL VALVE
11X4.00-5-JS87 11X4.00-5 BENT METAL VALVE 20X8.00-8 STRAIGHT VALVE
12-1/2X2-1/4-DIN7777 12-1/2X2-1/4 BENT METAL VALVE
12-1/2X2-1/4-SV 12-1/2X2-1/4 SHRADER VALVE 23X10.50-12 STRAIGHT VALVE
13X5.00-6-JS87 13X5.00-6 BENT METAL VALVE
13X5.00-6-TR13 13X5.00 STRAIGHT RUBBER VALVE 26X12.00-12 STRAIGHT VALVE
13X6.50-6-TR13 13X6.50-6 STRAIGHT VALVE
200-50 BENT METAL VALVE

Tubes are available to suit most of our pneumatic wheel and tyres range
and these have valve types to suit common rim styles. In general 2 piece
bolt-together rims require tubes with bent brass valves and one-piece rims
with a centre well require tubes with off-set rubber valves. There are some
exceptions especially in smaller tyres and rim sizes. Below are some of the
more common valve types – Please contact a member of our sales team
for further assistance.

DIN7777 SV WH767 TR87

TR13

PNEUMATIC
& FOAM

l 90 l

NON-MARKING MOBILITY TYRES
PNEUMATICS
BLACK PNEUMATIC
GENERAL INFORMATION
SCOOTER TYRES
Non-marking tyres for scooters, wheelchairs and mobility
devices are intended for both indoor and outdoor use on ITEM CODE TREAD PATTERN TYRE SIZE PLY RATING
most surfaces. They perform in a similar manner to their
black coloured equivalents except that they are non-marking 4.10/3.50-4-4PR-SAW SAW 4.10/3.50-4 4 50
so can be used on light coloured flooring and tiles without 4.10/3.50-6 4 35
leaving marks. 4.10/3.50-6-4PR-KNO-B ABILITY BLACK 12-1/2X2-1/4 2 40
4 35
THINGS TO NOTE ABOUT MOBILITY TYRES & TUBES: 12-1/2X2-1/4-UN UNIVERSAL 200-50

»» Just like a motor vehicle, worn treads will mean that the 200-50-4PR-RIB RIB
tyres lose their grip – tyres should be replaced before the
tread wears down significantly. ABILITY BLACK RIB SAW

»» Tubes are available to suit most of our pneumatic wheel
and tyres range and these have valve types to suit common
rim styles.

»» Correct tyres pressures should be checked and
maintained (recommended pressure is normally branded on
the side of the tyres)

»» Under-inflated tyres can cause an appliance/vehicle to
become unstable with the potential to cause damage and
injury

QHDC pneumatic wheels are chosen for their quality and
suitability for tough Australian conditions

UNIVERSAL

PLEASE NOTE: Most non marking tyres are also available with
puncture free foam fill option, please see page 98 for stocked
sizes. Other sizes of tyres are also available on indent however
minimum order quantities apply.

l 91 l

FOR SCOOTERS,
MOBILITY DEVICES

NON-MARKING PNEUMATIC LIGHT

SCOOTER TYRES

ITEM CODE TREAD PATTERN TYRE SIZE PLY MEDIUM
200-50-4PR-RIB-BNM SPIRIT (BLACK) 200-50 RATING
36
4 36
36
200-50-4PR-RIB-G SPIRIT 200-50 4 36 ABILITY BAJA C166
36 C189
2.50-8-2PR-PLANT-G POWER PLANT 2.50-8 2 35 DUROTRAP HEAVY
35 POWER EDGE
2.50-8-2PR-PLANT-G POWER PLANT 2.50-8 2 35 POWER PLAY
55 SPIRIT
2.50-8-4PR-PLANT-G POWER PLANT 2.50-8 4 35
35
2.50-8-2PR-TRAP-G DUROTRAP 2.50-8 2 35 C623 DIAMOND
35
2.50-8-4PR-TRAP-G DUROTRAP 2.50-8 4 35
50
2.80/2.50-4-4PR-RIB-G SPIRIT 2.80/2.50-4 4 35
50
2.80/2.50-4-4PR-ZZ-G POWER EDGE 2.80/2.50-4 4 50
50
50 GRANDE NIMBLE
50
3.00-10-4PR-TRAP-G DUROTRAP 3.00-10 4 50
50
3.00-4-4PR-PLAY-G POWER PLAY 3.00-4 4 50
50
3.00-4-4PR-RIB-G SPIRIT 3.00-4 4 50
36
3.00-4-4PR-TRAP-G DUROTRAP 3.00-4 4 POWER EXPRESS POWER PLANT

3.00-4-4PR-TRAX-G POWERTRAX 3.00-4 4

3.00-8-4PR-TRAP-G DUROTRAP 3.00-8 4

3.00-8-4PR-TRAX-BNM POWERTRAX(BLACK) 3.00-8 4

3.00-8-4PR-TRAX-G POWERTRAX 3.00-8 4 POWERTRAX RIB (SPIRIT)

4.00-5-4PR-DIA-G DIAMOND 4.00-5 4

4.00-6-4PR-C166G C166 4.00-6 4

4.10/3.50-4-4PR-C189-G C189 4.10/3.50-4 4

4.10/3.50-4-4PR-STUD-G NIMBLE 4.10/3.50-4 4

4.10/3.50-5-4PR-BA-G BAJA 4.10/3.50-5 4

4.10/3.50-5-4PR-STUD-G NIMBLE 4.10/3.50-5 4 PNEUMATIC
& FOAM
4.10/3.50-6-4PR-KNO-G ABILITY 4.10/3.50-6 4

4.10/3.50-6-4PR-STUD-G NIMBLE 4.10/3.50-6 4

9X3.50-4-4PR-TUR-G GRANDE 9X3.50-4 4

7X1-3/4-4PR-C179-BNM SPIRIT (BLACK) 7X1-3/4 4 MOBILITY

l 92 l

MOBILITYTYRES

NON-MARKING PNEUMATIC

WHEELCHAIR TYRES

ITEM CODE TREAD PATTERN TYRE SIZE

16X1.75-C-97-G C97 PRIMO 16X1.75 50-75
100
20X1(25-451)-C1836-BNM C1836 PRIMO SENTINEL 20X1(25-451) 65
110
20X1-3/8-ORION-G ORION C62 PRIMO 20X1-3/8 65
85-145
22X1(25-501)-G PRIMO V-TRAK PRIMO 22X1(25-501) 110 C1090 PRIMO C1836 PRIMO C740 PRIMO
85-115 CHAMPION SENTINEL
22X1-3/8-ORION-G ORION C62 PRIMO 22X1-3/8 100
65
23-559(26X7/8)RR,GREY RIGHTRUN GRY SCHWALBE 23-559(26X7/8) 65
35-70
24X1(25-540)-C1025-G PRIMO V-TRACK 24X1(25-540) 115
85-115
24X1(25-540)-C1157-G PRIMO COURT 24X1(25-540) 85-145
85-145
24X1(25-540)-C1836 C1836 PRIMO SENTINEL 24X1(25-540) 85-145 C763 PRIMO MARATHON BLACK ORION PRIMO
85-145 SCHWALBE
85-115
24X1-3/8-C763-G C763 PRIMO 24X1-3/8 85-145
85-145
24X1-3/8-ORION-G ORION C63 PRIMO 24X1-3/8 110
110
24X2(50-590)-BIGAP BIG APPLE SCHWALBE 24X2(50-590) 100
110
25-489(22X1)RR,GRY RIGHTRUN GRY SCHWALBE 25-489(22X1) 55-80 RIGHTRUN GRY RIGHTRUN V-TRAK PRIMO
110 SCHWABLE SCHWABLE
100
25-489(22X1)M/THONBLK MARATHON BLACK SCHWALBE 25-489(22X1) 36
36
25-540(24X1)M/THONBLK MARATHON BLACK SCHWALBE 25-540(24X1) 36
36
25-540(24X1)RR,BLUE RIGHTRUN SCHWALBE 25-540(24X1) 36
40
25-540(24X1)RR,GREY RIGHTRUN GRY SCHWALBE 25-540(24X1) V-TRAK-BLU PRIMO RACER C1083 BIG APPLE
PRIMO SCHWALBE
25-559(26X1)M/THONBLK MARATHON BLACK SCHWALBE 25-559(26X1)

25-559(26X1)ONE-HS462A SCHWALBE ONE - HS462A 25-559(26X1)

25-590(26X1)M/THONBLK MARATHON BLACK SCHWALBE 25-590(26X1)

25-590(26X1)RR,GREY RIGHTRUN GRY SCHWALBE 25-590(26X1)

25X1(20-559)-C1083-G RACER C1083 PRIMO 25X1(20-559) C97 PRIMO PRIMO COURT ONE SCHWALBE

26X1(25-590)-C1025-B PRIMO V-TRAK-BLU 26X1(25-590)

26X1(25-559)-C1836 C1836 PRIMO SENTINEL 26X1(25-559)

26X1(25-590)-C1025-G PRIMO V-TRACK-GREY 26X1(25-590)

37-540(24X1-3/8)MTHONBK MARATHON BLACK SCHWALBE 37-540(24X1-3/8)

700X19(19-622)C1090-BLK C1090 PRIMO CHAMPION 700X19(19-622)

700X28-C740-G C740 PRIMO 700X28

6X1-1/4-2PR-RIB-G SPIRIT PRIMO 6X1-1/4

7X1-3/4-4PR-C179-G RIB (SPIRIT) PRIMO 7X1-3/4

7X1-3/4-4PR-C179-BNM SPIRIT (BLACK) 7X1-3/4

8X1-1/4-2PR-RIB-G SPIRIT PRIMO 8X1-1/4

12-1/2X2-1/4-KNO-G C623 PRIMO 12-1/2X2-1/4

12-1/2X2-1/4-PE-G POWER EXPRESS PRIMO 12-1/2X2-1/4

l 93 l

MOBILITYTUBES

ITEM CODE TYRE SIZE VALVE TYPE Tubes are available to suit most of our pneumatic wheel and tyres range LIGHT
and these have valve types to suit common rim styles. In general 2 piece
200-50-JS87 200-50 BENT METAL VALVE bolt-together rims require tubes with bent brass valves and one-piece rims
200-50-WH767P-A30 200-50 WH767 with a centre well require tubes with off-set rubber valves. There are some
2.50/3.00-4-TR13 2.50/3.00-4 STRAIGHT VALVE exceptions especially in smaller tyres and rim sizes. Below are some of the
2.50-6-JS87 2.50-6 BENT METAL VALVE more common valve types – Please contact a member of our sales team
2.50-6-TR13 2.50-6 STRAIGHT VALVE for further assistance.
3.00-10-TR87 3.00-10 BENT METAL VALVE
3.00-8-TR13 3.00-8 STRAIGHT RUBBER VALVE MEDIUM
3.00-8-TR87 3.00-8 BENT METAL VALVE
3.50/4.00-8-TR13 3.50/4.00-8 STRAIGHT VALVE DIN7777 SV WH767 TR87
4.00-5-TR87 4.00-5 BENT METAL VALVE
4.00-8-JS87 4.00-8 BENT METAL VALVE TR13 HEAVY
4.10/3.50-4-DIN7777 4.10/3.50-4 BENT METAL VALVE
4.10/3.50-4-TR13 4.10/3.50-4 STRAIGHT VALVE PNEUMATIC
4.10/3.50-5-TR87 4.10/3.50-5 BENT METAL VALVE & FOAM
4.10/3.50-6-TR13 4.10/3.50-6 STRAIGHT VALVE
4.10/3.50-6-TR87 4.10/3.50-6 BENT METAL VALVE MOBILITY
6X1-1/4-WH767 6X1-1/4 BENT METAL VALVE
7X1-3/4-BV 7X1-3 SCHRADER VALVE
7X1-3/4 WH767P-A30 7X1-3/4 WH767
8X1-1/4-WH767 8X1-1/4 BENT METAL VALVE
12-1/2X2-1/4-DIN7777 12-1/2X2-1/4 BENT METAL VALVE
12-1/2X2-1/4-SV 12-1/2X2-1/4 SCHRADER VALVE
16X1.50/1.75-SV 16X1.75 SCHRADER VALVE
20X1(19-451)-SV 20X1(19-451) SCHRADER VALVE
20X1-3/8-SV 20X1-3/8 SCHRADER VALVE
22X1-3/8-SV 22X1-3/8 SCHRADER VALVE
22X1-SV 22X1 SCHRADER VALVE
24X1(25-540)-SV 24X1(25-540) SCHRADERVALVE
24X1-3/8-SV 24X1-3/8 SCHRADER VALVE
24X2(50-590)-AV 24X2(50-590) AUTO
26X1(25-559)-SV 26X1(25-559) SCHRADER VALVE
26X1(25-590)-SV 26X1(25-590) SCHRADER VALVE
700X19/23C-PV 700X19 PRESTA VALVE
700X23C-AV 700X23C CAR VALVE

l 94 l

MOBILITYTYRES

NON-MARKING SOLID PU

WHEELCHAIR TYRES

PRODUCT CODE TYRE SIZE TREAD PATTERN BEAD WIDTH (mm) TYRE DIAMETER TYRE WIDTH
(mm) (mm)

20X1-3/8-PU-P173 20X1-3/8 P173 BLACK 19.8 505 30 P154 BLACK
20X1-3/8-PU-P173-G 20X1-3/8 P173 GREY
22X1-3/8-PU-P173 22X1-3/8 P173 BLACK 19.8 505 30
22X1-3/8-PU-P173-G 22X1-3/8 P173 GREY
24X1-PU-P154 24X1 P154 BLACK 19.8 555 30
24X1-3/8-PU-EXPRESS-B 24X1-3/8 P173 BLACK
24X1-3/8-PU-ORION-G 24X1-3/8 ORION 19.8 555 30
25X1(25-559)-PU-P154 25X1(25-559) P154 BLACK
20 565 25 P173 BLACK

19.8 580 30

19.8 580 30

20 580 25

P173 GREY

FOAM FILLED & SOLID

NON-MARKING MOBILITY TYRES

Foam-filled and solid PU tyres for scooters, wheelchairs and mobility devices
are intended for both indoor and outdoor use on most surfaces. They perform
in a similar way to the equivalent size pneumatic tyres but have the benefit of
being Puncture-Free – they won’t go flat.

THINGS TO NOTE ABOUT NON MARKING FOAM-FILLED AND SOLID PU TYRES:

»» Grey foam-filled tyres are simply pneumatic tyres with a polyurethane foam
filling that replicates the performance of the equivalent pneumatic tyres when
inflated to its recommended pressure.
»» Solid PU tyres are manufactured using MCP – micro-cellular polyurethane -
that is molded with a “skin” that forms the tread and smooth sidewalls of the
tyres. Polyurethane is resilient, abrasion resisting and hard wearing material for
long life, low maintenance service. It is also non marking.
»» These tyres are normally heavier than their pneumatic counterparts.
»» Just like a motor vehicle, worn treads will mean that the tyres lose their grip –
tyres should be replaced before the tread wears down significantly
QHDC is proud to supply Primo brand non-marking tyres and tubes – a
globally recognised, quality brand manufactured by CST (Cheng Shin Tyres)

l 95 l

FOR SCOOTERS,
MOBILITY DEVICES
& WHEELCHAIRS

NON-MARKING FOAM FILLED LIGHT

SCOOTER TYRES *GRN denotes green colour foam

PRODUCT CODE TYRE SIZE TREAD PATTERN BEAD WIDTH TYRE DIAMETER TYRE WIDTH MEDIUM
(mm) (mm) (mm)

200-50-FF-RIB-G 200-50 SPIRIT FF 31 190 47 HEAVY
200-50-GREY-RIB-FOAM 200-50 RIB 31 200 50
200-50-FF-RIB-BNM(FT37) 200-50 RIB (BLACK) 31 200 50
2.50-8-FF-C177G-F48 2.50-8 POWER PLANT FF 48 325 66
2.80/2.50-4-FF-RIB-G-47 2.80/2.50-4 SPIRIT 47 218 65
2.80/2.50-4-FF-RIB-G-68 2.80/2.50-4 SPIRIT 68 218 65
2.80/2.50-4-FF-ZZ-G 2.80/2.50-4 POWER EDGE FF 47 220 63
3.00-4-FF-PLAY-G 3.00-4 POWERPLAY FF 64 245 90
3.00-4-FF-TRAP-G 3.00-4 DUROTRAP FF 65 254 88
3.00-8-FF-C248BNM-C55 3.00-8 POWERTRAX CASTELLATED 55 356 76
3.00-8-FF-C248G(C55) 3.00-8 POWERTRAX CASTELLATED 55 344 76
3.00-8-FF-TRAP-G 3.00-8 DUROTRAP FF 55 346 76
3.00-8-FF-TRAX-BNM(F55) 3.00-8 POWERTRAX (BLACK) 55 356 76
3.00-8-FF-TRAX-BNM-DD(F 3.00-8 POWERTRAX (BLACK) DUAL DENSITY 42 356 76
3.00-8-FF-TRAX-G (F42) 3.00-8 POWERTRAX FF *GRN 37 342 76
3.00-8-FF-TRAX-G (F48) 3.00-8 POWERTRAX FF *GRN 51 342 76
3.00-8-FF-TRAX-G-DD(F42 3.00-8 POWERTRAX DUAL DENSITY 42 352 76
4.00-5-FF-DIA-G 4.00-5 PRIMO DIAMOND 63 315 92
4.00-6-FF-C165G85 4.00-6 C166 KNO 85 340 114
4.10/3.50-6-FF-KNO-G 4.10/3.50-6 ABILITY 82 310 100
7X1-3/4-FF-RIB-G(FT37) 7X1-3/4 SPIRIT FF 37 175 46
7X1-3/4-FF-RIB-BNM(FT37) 7X1-3/4 SPIRIT (BLACK) FF 37 175 46
12-1/2X2-1/4-FF-PE-G 12-1/2X2-1/4 POWER EXPRESS FF 46 320 64
12-1/2X2-1/4-FF-PE-GF42 12-1/2X2-1/4 POWER EXPRESS FF 42 320 64

PNEUMATIC
& FOAM

ABILITY DUROTRAP FF POWER EDGE POWER EXPRESS POWER PLANT FF POWERPLAY

MOBILITY

POWERTRAX POWERTRAX PRIMO DIAMOND RIB SPIRIT C166 KNO
CASTELLATED
l 96 l