Pengajaran Dan Pembelajaran

THIRD EDITION (PRINTED 2016)

Semester 3

Certificate In Automotive Engineering Technology 24

ASSESSMENT INSTRUMENT FORMAT
CVA31064 VEHICLE TECHNOLOGY 3

COURSEWORK FINAL
A3(F)
NO SUBJECT T1(P) A1 A2 (20%)
1 Type of Assessments 20% 30% 30%
• Practical
• Field study • Practical • Practical • KI Assessment
• KI Assessment • KI Assessment • KI Assessment
(KI-1D, KI-3A)
(KI-1A, KI-1C, KI-2A, KI-2B, KI- (KI-4A) (KI-4C)
2C, KI-3A, KI-3B, KI-4A, KI-4C, Skill Work
KI-6A, KI-6B, KI-6C). Skill Work
Individual
2 Type Of Instruments Field Study Assessment Skill Work Grouping
(Written Report, Presentation Skills, 1 Task
3 Tasks Practical
Peer Assessment, Log Book) Practical
& 90%
90% KI Assessment
Document KI-04 KI Assessment
THIRD EDITION (PRINTED 2016) 10%
3 Grouping/IndividualCertificate In Automotive Engineering Technology 25GroupingGrouping 10% 2 hours
6 hours / task Unit 1 – 6
4 Number Of Question/Task 1 Task 3 Tasks
Unit 4 – 6
5 Total Mark Field Study Practical
64 % 90%
6 Duration Of Assesment
7 Contextual Scope KI Assessment KI Assessment
36 % 10%

2 weeks 7 hours / task

Unit 1 – 6 Unit 1 – 3

MQA-P07

COURSE LEARNING OUTCOMES AND ASSESSMENT MATRIX

Name Of Programme : CERTIFICATE IN AUTOMOTIVE ENGINEERING TECHNOLOGY
Code & Name Of Course : CVA31064 VEHICLE TECHNOLOGY 3

ASSESSMENT

NO COURSE LEARNING OUTCOMES UNITS DOMAIN & LEVEL COURSEWORK KI
(CLO)
T1(P) A1 A2 A4(F)

20% 30% 30% 20%

CLO1 Describe the construction and function of 1. Automatic Transmission C2 x
CLO2 automatic transmission, ABS, power steering 2. ABS
CLO3 system, four wheel drive, differential unit and 3. Power Steering System x
CLO4 axle based on passenger vehicle. 4. Four Wheel Drive x
5. Differential Unit and Axle x
Perform troubleshoot on automatic transmission, 6. Road Testing P4
ABS, power steering system, four wheel drive, 1. Automatic Transmission
differential unit and axle according to workshop 2. ABS x
specification. 3. Power Steering System x
4. Four Wheel Drive x
Explain verbally and carry out maintenance 5. Differential Unit and Axle x
service and overhaul procedure of automatic 6. Road Testing x
transmission, ABS, power steering system, four 1. Automatic Transmission x
wheel drive, differential unit and axle according 2. ABS P4 x
to workshop manual. 3. Power Steering System x
4. Four Wheel Drive x
Demonstrate work as a team according to road 5. Differential Unit and Axle x
test and analyze result of road testing. 6. Road Testing x
1. Automatic Transmission x
2. ABS x
3. Power Steering System A3 x
4. Four Wheel Drive x
5. Differential Unit and Axle x
6. Road Testing x
THIRD EDITION (PRINTED 2016)
Keys:Certificate In Automotive Engineering Technology 26

Tx (T) – Theory Test Ax (T) – Practical Test
Tx (N) – Numerical Theory Test Ax (P) – Practical project
Tx (Q) – Quiz Ax – Practical
Tx (A) – Theory Assignment Ax (F) – Final (Practical)
Tx (F) – Final (Theory)

ASSESSMENT INSTRUMENT FORMAT
CVA31073 PETROL ENGINE 2

COURSEWORK FINAL
T2(F)
NO SUBJECT T1(T) A1 A2 A3 (20%)
1 Type of Assessments 10% 20% 20% 30%
2 Type Of Instruments Final (Theory)
Theory Test • Practical • Practical • Practical
• KI Assessment • KI Assessment • KI Assessment Objective &
Subjective
(KI-1B & KI-4C) (KI-1B & KI-4C) (KI-1B, KI-2A, KI-4C)

Objective & Subjective Skill Work Skill Work Skill Work

3 Grouping/Individual Individual Individual Individual Grouping Individual

THIRD EDITION (PRINTED 2016)Part A1 task2 tasksPart A
Certificate In Automotive Engineering Technology 27 20 Questions Objective
20 Questions Objective Practical Practical
90% 90% (Answer all)
4 Number Of Question/Task (Answer all) 1 task Part B
Part B KI Assessment KI Assessment
10% 10% 3 Question Structure
3 Question Subjective (Answer 2)
8 hours 10 hours / task
(Answer 2) Unit 2 Unit 3 & 5 Part A
20 Marks
5 Total Mark Part A Practical Part B
40 Marks 90% 30 Marks

Part B KI Assessment 2 hours
60 Marks 10%
Unit 1 – 5
6 Duration Of Assesment 1 hour 12 hours

7 Contextual Scope Unit 1 – 3 Unit 1

MQA-P07

COURSE LEARNING OUTCOMES AND ASSESSMENT MATRIX

Name Of Programme : CERTIFICATE IN AUTOMOTIVE ENGINEERING TECHNOLOGY
Code & Name Of Course : CVA31073 PETROL ENGINE 2

ASSESSMENT

NO COURSE LEARNING OUTCOMES UNITS DOMAIN & LEVEL COURSEWORK FINAL KI
(CLO) C2 X
T1(P) A1 A2 A3 T2(F)
C2 10%
P4 20% 20% 30% 20%
P4 X
1. Turbocharger A3 X X
2. Supercharger X
CLO1 Understand the principle operation of force 3. Emission control system X
induction system , emission control system and 4. Engine Enhancement
engine enhancement on automobile petrol engine. 5. EFI Engine Diagnostic X
1. Turbocharger
2. Supercharger X
3. Emission control system
4. Engine Enhancement X
5. EFI Engine Diagnostic
1. Turbocharger X
2. Supercharger
Explain precisely construction and function of force 3. Emission control system X
CLO2 induction system , emission control system and 5. EFI Engine Diagnostic
1. Turbocharger X
engine enhancement components. 2. Supercharger
3. Emission control system X
5. EFI Engine Diagnostic
3. Emission control system X
5. EFI Engine Diagnostic
X

Perform inspection on turbocharger, supercharger X
CLO3 and emission control system based on workshop
X
specification.

THIRD EDITION (PRINTED 2016)X
Certificate In Automotive Engineering Technology 28
X

Explain verbally and carry out the engine parameter X
CLO4 test and troubleshooting using diagnostic scan tool
X
and exhaust gas analyzer.

X

CLO5 Demonstrate work as a team according to task X
given.
X

Keys:

Tx (T) – Theory Test Ax (T) – Practical Test
Tx (N) – Numerical Theory Test Ax (P) – Practical project
Tx (Q) – Quiz Ax – Practical
Tx (A) – Theory Assignment Ax (F) – Final (Practical)
Tx (F) – Final (Theory)

ASSESSMENT INSTRUMENT FORMAT
CVV30032 AUTOMOTIVE AIR-CONDITIONING

COURSEWORK FINAL
T2(F)
NO SUBJECT T1(T) A1 A2 A3 20%
1 Type of Assessments 10% 20% 20% 30%
2 Type Of Instruments • Practical Final Theory
Theory Test • Practical • Practical • KI Assessment
• KI Assessment • KI Assessment (KI-2A, KI-3A & Objective &
Objective & KI-5A) Subjective
Subjective (KI-1D & KI-4A) (KI-1D)
Skill Work
Skill Work Skill Work

3 Grouping/Individual Individual Individual Individual Grouping Individual

Part A 1 Task 1 Task 1 Task Part A
THIRD EDITION (PRINTED 2016)20 Questions Objective
Certificate In Automotive Engineering Technology 2920 Questions ObjectivePracticalPracticalPractical
90% 90% 90% (Answer all)
4 Number Of Question/Task (Answer all) Part B
Part B KI Assessment KI Assessment KI Assessment
10% 10% 10% 3 Question Structure
3 Question Subjective (Answer 2)
8 hours 8 hours 12 hours
(Answer 2) Unit 3 Unit 3 Unit 3 – 4 Part A
20 Marks
5 Total Mark Part A
40% Part B
30 marks
Part B
60% 2 hours

6 Duration Of Assesment 1 hour Unit 1 – 4

7 Contextual Scope Unit 1 – 2

MQA-P07

COURSE LEARNING OUTCOMES (CLO) AND ASSESSMENT MATRIX

Name Of Programme : CERTIFICATE IN AUTOMOTIVE ENGINEERING TECHNOLOGY

Code & Name Of Course : CVV30032 AUTOMOTIVE AIR CONDITIONING

NO COURSE LEARNING OUTCOMES UNITS DOMAIN & LEVEL ASSESSMENT FINAL KI
(CLO) COURSEWORK T2(F) X
T1(T) 20%
10% A1 A2 A3
20% 20% 30% X
X X
CLO1 Explain principles operation of air-conditioning 1.Basic Air Conditioning Theory C2 X
system in automobile passenger vehicle. 2.Basic System Components C2 X
3.Service & Repair Air Conditioning X
CLO2 Describe construction and function of automotive System X X
air-conditioning components. 4.Electronic Temperature Control System X
1.Basic Air Conditioning Theory X
2.Basic System Components X
3.Service & Repair Air Conditioning System X
4.Electronic Temperature Control System

Explain verbally and carry out maintenance service 3.Service & Repair Air Conditioning System XXX
CLO3 and troubleshooting of air conditioning system on 4.Electronic Temperature Control System X

passenger vehicle.
THIRD EDITION (PRINTED 2016)P5
Certificate In Automotive Engineering Technology 30
CLO4 Demonstrate work as a team according to task 3.Service & Repair Air Conditioning System A3 X
given. 4.Electronic Temperature Control System X

Keys: Ax(T) – Practical Test
T1(T) – Theory Test Ax(P) – Practical Project
Tx(N) – Numerical Theory Test Ax – Practical
Tx(Q) – Quiz Ax(F) – Final Practical
Tx(A) – Theory Assignment
Tx(F) – Final Theory

ASSESSMENT INSTRUMENT FORMAT
CVA30083 AUTOMOTIVE DIESEL ENGINE

COURSEWORK FINAL

NO SUBJECT T1(T) A1 A2 A3 T2(F)
10% 20% 20% 30% (20%)
1 Type of Assessments
2 Type Of Instruments Theory Test • Practical • Practical • Practical Theory Test
3 Grouping/Individual • KI Assessment • KI Assessment • KI Assessment
4 Number Of Question/Task Objective & Objective &
Subjective (KI-1B, KI-1C, KI- (KI-1B, KI-1C, KI- (KI-1B, KI-1C, KI- Subjective
5 Total Mark 2B, KI-4C) 2B, KI-4C) 2B, KI-4C)
6 Duration Of Assesment Individual Individual
7 Contextual Scope Skill Work Skill Work Skill Work
Part A Part A
20 Questions Objective Grouping Grouping Grouping 20 Questions Objective

THIRD EDITION (PRINTED 2016)(Answer all)1 task2 tasks2 tasks(Answer all)
Certificate In Automotive Engineering Technology 31Part B Part B
Practical Practical Practical
3 Question Subjective 90% 90% 90% 3 Question Structure
(Answer 2) (Answer 2)
Part A KI Assessment KI Assessment KI Assessment Part A
40% 10% 10% 10% 20 Marks
Part B Part B
60% 14 hours 8 hours / task 8 hours / task 30 Marks

1 hour Unit 1 Unit 3 – 4 Unit 5 – 6 2 hours

Unit 1 – 3 Unit 1 – 6

MQA-P07

COURSE LEARNING OUTCOMES (CLO) AND ASSESSMENT MATRIX

Name Of Programme : CERTIFICATE IN AUTOMOTIVE ENGINEERING TECHNOLOGY
Code & Name Of Course : CVA30083 AUTOMOTIVE DIESEL ENGINE

NO COURSE LEARNING OUTCOMES UNITS DOMAIN & T1(T) ASSESSMENT FINAL KI
(CLO) LEVEL 10% COURSEWORK T2(F) x
20%
CLO1 Explain basic principle operation diesel of 1. Diesel Fuel System C2 x A1 A2 A3
automobile engine. 2. Combustion Chambers x 20% 20% 30% x
3. Preheating System x x
4. Diesel Fuel Injection Pump x x
CLO2 Describe the construction and function of 5. Fuel Injection Pump Calibrate Machine x x x
mechanical diesel fuel system , preheating 6. Electronic Diesel Fuel Injection x x x
system and electronic fuel injection system. 1. Diesel Fuel System x x x
2. Combustion Chambers C2 x x
3. Preheating System x
4. Diesel Fuel Injection Pump x x
5. Fuel Injection Pump Calibrate Machine x x
6. Electronic Diesel Fuel Injection x x
1. Diesel Fuel System x x
3. Preheating System x
4. Diesel Fuel Injection Pump
5. Fuel Injection Pump Calibrate Machine
6. Electronic Diesel Fuel Injection
1. Diesel Fuel System
3. Preheating System
4. Diesel Fuel Injection Pump
5. Fuel Injection Pump Calibrate Machine
6. Electronic Diesel Fuel Injection
CLO3 THIRD EDITION (PRINTED 2016)Carry out overhaul and calibration of diesel fuelP4
Certificate In Automotive Engineering Technology 32injection pump according to specification. A3

CLO4 Demonstrate work as a team according to task
given.

Keys:

Tx (T) – Theory Test Ax (T) – Practical Test
Tx (N) – Numerical Theory Test Ax (P) – Practical project
Tx (Q) – Quiz Ax – Practical
Tx (A) – Theory Assignment Ax (F) – Final (Practical)
Tx (F) – Final (Theory)

DETAILED ASSESSMENT
CERTIFICATE IN AUTOMOTIVE ENGINEERING TECHNOLOGY

July 2012
(Third Edition)

Printed 2016
Bahagian Kemahiran Dan Teknikal MARA

Level 20 & 21, MARA Headquarters,
21, Jalan MARA,

50609 Kuala Lumpur.

CONTENTS

1 Assessment Weightage Of Course Page
2 Detailed Assessment: Semester 1
1
CVA10012 Vehicle Technology 1
CVV10012 Engine Fundamental 4
CVV10023 Workshop Practice 6
CVA10023 Automotive Electrical 8
CKV10042 Engineering Drawing 10
12
3 Detailed Assessment: Semester 2
15
CVA21033 Vehicle Technology 2 17
CVA20043 Automotive Control System and
Diagnosis 19
CVA20054 Petrol Engine 1 21
CKV20022 Engineering Science 1
25
4 Detailed Assessment: Semester 3 27
29
CVA31064 Vehicle Technology 3 31
CVA31073 Petrol Engine 2
CVV30032 Automotive Air-Conditioning
CVA30083 Automotive Diesel Engine

ASSESSMENT WEIGHTAGE OF COURSES

CLUSTER : AUTOMOTIVE
PROGRAMME : CERTIFICATE IN AUTOMOTIVE ENGINEERING TECHNOLOGY

Course Code/ CVA10012 CVV10012 CVV10023 CVA10023 CKV10042
Semester
T A T A T A T A TA
1 T1(T) 10% T1(T) 10% T1(T) 10% T1(T) 10% A1(P) 30%
T2(F) 20% A1 20% T2(F) 20% A1 20% A1 20% T2(F) 20% A1 20% A2(T) 20%
A2 20% A2 20% A2 20% A2 20% A3(P) 30%
A3 30% A3 30% A3 20% A3 30% A4(T) 20%
A4 30%
0% 100%
30% 70% 30% 70% 10% 90% 30% 70%

Course Code/ CVA21033 CVA20043 CVA20054 CKV20022
Semester
T A T A T AT A
2 T1(T) 10% T1(T) 10% T1(T) 10% 0%
T2(F) 20% A1 20% T2(F) 20% A1 20% T2(F) 20% A1 20% T1(T) 20%
A2 20% A2 20%
A3 30% A3 30% A2 20% T2(T) 20%

A3 30% T3(Q) 10%

T4(A) 10%

T5(F) 40%

30% 70% 30% 70% 30% 70% 100%

Course Code/ CVA31064 CVA31073 CVV30032 CVA30083
Semester
T A T A T A T A
3 T1(P) 20% A1 30% T1(T) 10% A1 20% T1(T) 10% A1 20% T1(T) 10% A1 20%
A2 30% T2(F) 20% A2 20% T2(F) 20% A2 20% T2(F) 20% A2 20%
A3(F) 20% A3 30% A3 30% A3 30%
THIRD EDITION (PRINTED 2016)
Certificate In Automotive Engineering Technology 120%80%30%70% 30% 70% 30% 70%

Keys : AX ─ Practical (labotary work, drawing, assemble,
TX ─ Listening/Speaking/Reading/Simulation serving, maintenance, computer based assignment,
presentation skill, survey work, field study and oral)
TX(T) ─ Theory Test
TX(N) ─ Numerical Theory Test AX(P) ─ Practical Project (Project, Product, Fabrication,
TX(Q) ─ Quiz Drawing project, computer based project & simuation)
TX(P) ─ Theory Assignment with presentation
TX(A) ─ Theory Assignment & Report Writing AX(T) ─ Practical Test
TX(F) ─ Final Theory or Final Presentation AX(F) ─ Final Practical

AKRONIM WAJARAN

PENTAKSIRAN TEORI Cognitive Domain (Anderson) Affective Domain (Bloom)
TX: Listening/Speaking/Reading/Simulation C1 : Remembering A1 : Receiving
TX(T): Theory Test C2 : Understanding A2 : Responding
TX(N): Numerical Theory Test C3 : Applying A3 : Valuing
TX(Q): Quiz C4 : Analysing A4 : Organization
TX(P): Theory Assignment with presentation C5 : Evaluating A5 : Internalization
TX(A): Theory Assignment & Report Writing C6 : Creating/Designing
TX(F): Final Theory or Final Presentation
Psychomotor Domain (Simpson)
PENTAKSIRAN PRAKTIKAL P1 : Perception
P2 : Set
Ax : Practical (labotary work, drawing, assemble, P3 : Guided Response
serving, maintenance, computer based assignment, P4 : Mechanism
presentation skill, survey work and field study) P5 : Complex Overt Response
P6 : Adaptation
Ax(P) : Practical Project (Project, Product, Fabrication, P7 : Origination
Drawing project, computer based project & simuation)

Ax (T): Practical Test
Ax (F): Final Practical
Ax(O): Oral ( Kluster Elektrik sahaja)
THIRD EDITION (PRINTED 2016)
Certificate In Automotive Engineering Technology 2

THIRD EDITION (PRINTED 2016)

Semester 1

Certificate In Automotive Engineering Technology 3

ASSESSMENT INSTRUMENT FORMAT
CVA10012 VEHICLE TECHNOLOGY 1

COURSEWORK FINAL
T2(F)
NO SUBJECT T1(T) A1 A2 A3 (20%)
1 Type of Assessments 10% 20% 20% 30% Final (Theory)
2 Type Of Instruments
Theory Test • Practical & • Practical & • Practical & Objective
Document KI-04 Document KI-04 Document KI-04 Individual
(KI-1A, KI-1B) (KI-1C) (KI-4C)
40 Questions
Objective & Subjective Skill Work Skill Work Skill Work (Answer all)

3 Grouping/Individual THIRD EDITION (PRINTED 2016)IndividualGroupingGroupingGrouping40 Marks
4 Number Of Question/TaskCertificate In Automotive Engineering Technology 4
Part A 1 Task 1 Task 1 Task 1 hour
5 Total Mark 20 Questions Objective Unit 1 – 5
6 Duration Of Assesment Practical Practical Practical
7 Contextual Scope (Answer all) 90% 90% 90%
Part B
KI Assessment KI Assessment KI Assessment
3 Question Subjective 10% 10% 10%
(Answer 2)
7 hours 20 hours 7 hours
Part A Unit 3 Unit 2 & 4 Unit 5
40%

Part B
60%

1 hour

Unit 1 – 3

MQA-P07

COURSE LEARNING OUTCOMES (CLO) AND ASSESSMENT MATRIX

Name Of Programme : CERTIFICATE IN AUTOMOTIVE ENGINEERING TECHNOLOGY
Code & Name Of Course : CVA10012 VEHICLE TECHNOLOGY 1

NO COURSE LEARNING OUTCOMES UNITS DOMAIN & LEVEL ASSESSMENT FINAL KI
(CLO) C2 COURSEWORK T2(F)
T1(T) 20%
10% A1 A2 A3
20% 20% 30% X
X X
Describe the construction and function of chassis, 1.Chassis X X
CLO1 clutch, manual transmission, tire and wheel based 2.Bearing And Seal X X
3.Clutch X
on passenger vehicle. 4.Manual Transmission
5.Tire And Wheel
Explain the wear and tear of bearing and seal on 1.Chassis X X
CLO2 manual transmission and wheel according to visual 2.Bearing And Seal C2 X
3.Clutch
inspection. 4.Manual Transmission X
5.Tire And Wheel P4 X
2.Bearing And Seal
3.Clutch X
THIRD EDITION (PRINTED 2016)CLO3Perform service on clutch system and overhaul4.Manual Transmission
Certificate In Automotive Engineering Technology 5manual transmission of passenger vehicle.
5.Tire And Wheel
Perform tire and wheel maintenance by using tire P4 X
CLO4 changing machine and wheel balancing machine 2.Bearing And Seal
3.Clutch
according to specification. 4.Manual Transmission
5.Tire And Wheel
X

CLO5 Demonstrate work as a team according to task X X
given. A3

X

X

Keys: Ax(T) – Practical Test
T1(T) – Theory Test Ax(P) – Practical Project
Tx(N) – Numerical Theory Test Ax – Practical
Tx(Q) – Quiz Ax(F) – Final Practical
Tx(A) – Theory Assignment
Tx(F) – Final Theory

ASSESSMENT INSTRUMENT FORMAT
CVV10012 ENGINE FUNDAMENTAL

COURSEWORK FINAL
T2(F)
NO SUBJECT T1(T) A1 A2 A3 (20%)
1 Type of Assessments 10% 20% 20% 30% Final (Theory)
2 Type Of Instruments
Theory Test • Practical & • Practical & • Practical & Objective
Document KI-04 Document KI-04 Document KI-04 Individual
(KI-2A, KI-2C) (KI-3A) (KI-3B, KI-4C)
40 Questions
Objective & Subjective Skill Work Skill Work Skill Work (Answer all)

3 Grouping/Individual Individual Grouping Grouping Grouping 40 Marks

Part A 2 Tasks 2 Tasks 1 Task 1 hour
THIRD EDITION (PRINTED 2016) Unit 1 – 8
Certificate In Automotive Engineering Technology 620 Questions ObjectivePracticalPractical Practical
90% 90% 90%
4 Number Of Question/Task (Answer all)
Part B KI Assessment KI Assessment KI Assessment
10% 10% 10%
3 Question Subjective
3 hours / task 4 hours / task 16 hours
(Answer 2) Unit 4 – 5 Unit 6 – 7
Unit 8
5 Total Mark Part A
40%

Part B
60%

6 Duration Of Assesment 1 hour

7 Contextual Scope Unit 1 – 4

MQA-P07

COURSE LEARNING OUTCOMES (CLO) AND ASSESSMENT MATRIX

Name Of Programme : CERTIFICATE IN AUTOMOTIVE ENGINEERING TECHNOLOGY
Code & Name Of Course : CVV10012 ENGINE FUNDAMENTAL

NO COURSE LEARNING OUTCOMES UNITS DOMAIN & LEVEL T1(T) ASSESSMENT FINAL KI
(CLO) C2 10% COURSE WORK T2(F) X
20%
CLO1 Describe basic principle operation of petrol 1.Basic Engine Princple C2 X A1 A2 A3
engine. P2 20% 20% 30% X
2.Introduction To Internal combustion Engine P2 X X
A3 X X
3.Construction Of petrol And Diesel Engine. X X X
4.Intake And Exhaust System X X
5.Engine Fuel System (Carburation System ) X X
CLO2 Explain the function of the automobile engine 6.Lubrication System X X
components. 7.Engine Cooling System X
8.Cylinder Head Assembly X X
1.Basic Engine Princple X X
X X
THIRD EDITION (PRINTED 2016)2.Introduction To Internal combustion Engine
Certificate In Automotive Engineering Technology 7CLO3Identify and perform maintenance service on X
fuel, lubrication and cooling system Identify and 3.Construction Of petrol And Diesel Engine. X
show maintenance service on fuel, lubrication 4.Intake And Exhaust System
and cooling system according to specification. 5.Engine Fuel System (Carburation System ) X
6.Lubrication System X
CLO4 Explain verbally and carry out top overhaul 7.Engine Cooling System X
automobile petrol engine using standard tools. 4.Intake And Exhaust System
5.Engine Fuel System (Carburation System ) X
CLO5 Demonstrate work as a team according to the X
top overhaul task given. 6.Lubrication System
7.Engine Cooling System X
8.Cylinder Head Assembly
4.Intake And Exhaust System
5.Engine Fuel System (Carburation System )
6.Lubrication System
7.Engine Cooling System
8.Cylinder Head Assembly
4.Intake And Exhaust System
5.Engine Fuel System (Carburation System )
6.Lubrication System
7.Engine Cooling System
8.Cylinder Head Assembly

Keys: Ax(T) – Practical Test
T1(T) – Theory Test Ax(P) – Practical Project
Tx(N) – Numerical Theory Test Ax – Practical
Tx(Q) – Quiz Ax(F) – Final Practical
Tx(A) – Theory Assignment
Tx(F) – Final Theory

ASSESSMENT INSTRUMENT FORMAT
CVV10023 WORKSHOP PRACTICE

NO SUBJECT T1(T) A1 COURSEWORK A3 A4
1 Type of Assessments 10% 20% 20% 30%
2 Type Of Instruments A2
Theory Test • Practical & 20% • Practical & • Practical Project &
Document KI-04 Document KI-04 Document KI-04
Objective & Subjective (KI-1D) • Practical & (KI-4A) (KI-4A, KI-4C)
Document KI-04
(KI-4C)

Skill Work Skill Work Skill Work Skill Work

3 Grouping/Individual Individual Individual Individual Individual Individual

Part A Refer to Job Sheet
THIRD EDITION (PRINTED 2016)
Certificate In Automotive Engineering Technology 820 Questions Objective Practical
90%
4 Number Of Question/Task (Answer all) Refer to Job Sheet Refer to Job Sheet Refer to Job Sheet
Part B KI Assessment
10%
3 Question Subjective
15 hours
(Answer 2) Unit 2 – 3

5 Total Mark Part A Practical Practical Practical
40% 90% 90% 90%

Part B KI Assessment KI Assessment KI Assessment
60% 10% 10% 10%

6 Duration Of Assesment 1 hour 20 hours 5 hours 14 hours

7 Contextual Scope Unit 1 – 4 Unit 2, 4 & 5 Unit 7 Unit 8

MQA-P07

COURSE LEARNING OUTCOMES (CLO) AND ASSESSMENT MATRIX

Name Of Programme : CERTIFICATE IN AUTOMOTIVE ENGINEERING TECHNOLOGY
Code & Name Of Course : CVV10023 WORKSHOP PRACTICE

NO COURSE LEARNING OUTCOMES UNITS DOMAIN & LEVEL ASSESSMENT KI
(CLO) C3 COURSE WORK
T1(T) A1 A2 A3 A4
10% 20% 20% 20% 30%

Apply precisely used of common hand tools and 1.Workshop Safety X
CLO1 workshop equipments for purpose of maintenance 2.Marking Out and Measurement Tool X
3.Hand tool X
and repairing. 4.Thread And Fasteners X
5.Machine Tools
Explain correctly the common hand tools and 6.Fit,Limit And Tolerance X XX
CLO2 workshop equipments according to standard 7.Soldering And Brazing X XX
8.Welding Practices P2
operation procedure. 1.Workshop Safety X
THIRD EDITION (PRINTED 2016)2.Marking Out and Measurement Tool
Certificate In Automotive Engineering Technology 9 3.Hand tool X
4.Thread And Fasteners X
5.Machine Tools
CLO3 Show fitting process to produce products by using 6.Fit,Limit And Tolerance X X
a correct tools based on task given. 7.Soldering And Brazing X X
8.Welding Practices P2
1.Workshop Safety X X
2.Marking Out and Measurement Tool
3.Hand tool X X
4.Thread And Fasteners X
5.Machine Tools
6.Fit,Limit And Tolerance
7.Soldering And Brazing
8.Welding Practices

Keys: Ax(T) – Practical Test
Ax(P) – Practical Project
T1(T) – Theory Test Ax – Practical
Tx(N) – Numerical Theory Test Ax(F) – Final Practical
Tx(Q) – Quiz
Tx(A) – Theory Assignment
Tx(F) – Final Theory

ASSESSMENT INSTRUMENT FORMAT
CVA10023 AUTOMOTIVE ELECTRICAL

NO SUBJECT T1(T) COURSEWORK A2 A3 FINAL
1 Type of Assessments 10% 20% 30% T2(F)
A1 (20%)
Theory Test 20% • Practical & Final (Theory)
Document KI-04
• Practical & • Practical & (KI-4A) Objective
Individual
Document KI-04 Document KI-04
40 Questions
(KI-1A) (KI-2B) (Answer all)

2 Type Of Instruments Objective & Subjective Skill Work Skill Work Skill Work 40 Marks

3 Grouping/Individual Individual Grouping Grouping Grouping 1 hour
Unit 1 – 5
Part A 1 Task 1 Task 1 Task
THIRD EDITION (PRINTED 2016)
Certificate In Automotive Engineering Technology 1020 Questions ObjectivePracticalPracticalPractical
90% 90% 90%
4 Number Of Question/Task (Answer all)
Part B KI Assessment KI Assessment KI Assessment
10% 10% 10%
3 Question Subjective
8 hours 20 hours 14 hours
(Answer 2) Unit 2 – 3 Unit 2 & 4 Unit 2 & 5

5 Total Mark Part A
40%

Part B
60%

6 Duration Of Assesment 1 hour

7 Contextual Scope Unit 1 – 3

MQA-P07

COURSE LEARNING OUTCOMES (CLO) AND ASSESSMENT MATRIX

Name Of Programme : CERTIFICATE IN AUTOMOTIVE ENGINEERING TECHNOLOGY
Code & Name Of Course : CVA10023 AUTOMOTIVE ELECTRICAL

NO COURSE LEARNING OUTCOMES UNITS DOMAIN & LEVEL T1(T) ASSESSMENT FINAL KI
(CLO) C2 10% COURSEWORK T2(F) X
20%
Explain basic principle of electrical, electronics and 1.Basic Electrical X A1 A2 A3
magnetism in automotive application 2.Electric circuit and Test Instrument X 20% 20% 30% X
3.Electrical Components X
CLO1 4.Engine Electrical XXX X
5.Body Electrical 1 X X
CLO2 Describe precisely construction and function of 1.Basic Electrical C2 X X
automobile electrical system and component. 2.Electric circuit and Test Instrument P5 X X
3.Electrical Components A3 X X
4.Engine Electrical X
5.Body Electrical 1 XXX X
2.Electric circuit and Test Instrument X X
3.Electrical Components
4.Engine Electrical X
5.Body Electrical 1 X
2.Electric circuit and Test Instrument
3.Electrical Components
4.Engine Electrical
5.Body Electrical 1
THIRD EDITION (PRINTED 2016)
Certificate In Automotive Engineering Technology 11
Carry out maintenance service and troubleshoot of
CLO3 electrical and electronic system based on

specification.

CLO4 Demonstrate work as a team according to task
given.

Keys: Ax(T) – Practical Test
T1(T) – Theory Test Ax(P) – Practical Project
Tx(N) – Numerical Theory Test Ax – Practical
Tx(Q) – Quiz Ax(F) – Final Practical
Tx(A) – Theory Assignment
Tx(F) – Final Theory

ASSESSMENT INSTRUMENT FORMAT
CKV10042 ENGINEERING DRAWING

COURSEWORK

NO. SUBJECT A1(P) A2(T) A3(P) A4(T)
(30%) (20%) (30%) (20%)
1 Type of Assessments Practical Project
Practical Test • Practical Project • Practical Test
Drawing • KI Assessment • KI Assessment
Individual
(KI-1C and KI-4A) (KI-4A)

2 Type of Instruments Drawing • Drawing • Drawing
3 Grouping/Individual • Document KI-04 • Document KI-04
4 Number of Question / Task
Individual Individual Individual

THIRD EDITION (PRINTED 2016)5 Total MarkMinimum 3 Tasks1 TaskMinimum 3 Tasks1 Task
Certificate In Automotive Engineering Technology 12100%100%
6 Duration of Assessment 4 hours 4 hours Assignment Assignment
90% 90%

KI Assessment KI Assessment
10% 10%

4 hours 4 hours

7 Contextual Scope Unit 1 – 7 Unit 1 – 7 Unit 6 – 11 Unit 6 – 11
(Refer MQA–P07)

MQA-P07

COURSE LEARNING OUTCOMES (CLO) AND ASSESSMENT MATRIX

Name Of Programme : Certificate in Automotive Engineering Technology

Code & Name Of Course : CKV10042 ENGINEERING DRAWING

NO COURSE LEARNING OUTCOMES UNITS DOMAIN & ASSESSMENT FINAL
LEVEL COURSEWORK
1.0 Introduction To Engineering Drawing
2.0 Scales C2 , P3 A1(P) A2(T) A3(P) A4(T) KI
3.0 Line Work 30% 20% 30% 20% x
4.0 Lettering P4
5.0 Geometrical Construction and Application P5, A4 x x
6.0 Dimensioning x
7.0 Orthographic Projection x x
8.0 Pictorial Projection x
Practice engineering drawings and blue print according 9.0 Sectioning x x
to BS and ASME standards and conventions 10.0 Working Drawing x
CLO1 x x
11.0 Development
x

xxx

xxx

CLO2 Produce Isometric and sectioning drawing according to xx
BS and ASME standards
xx

Perform assembly, detail and sectional drawings of xx
CLO3 various engineering products and systems according to
xx
BS and ASME standards

Keys:

TX : Listening/Speaking/Reading/Simulation
TX(T) : Theory Test
TX(N) : Numerical Theory Test
TX(Q) : Quiz
TX(P) : Theory Assignment with presentation
TX(A) : Theory Assignment & Report Writing
TX(F) : Final Theory or Final Presentation
THIRD EDITION (PRINTED 2016)AX: Practical (labotary work, drawing, assemble,Cognitive Domain (Anderson)Psychomotor Domain (Simpson)Affective Domain (Bloom)
Certificate In Automotive Engineering Technology 13 P1 : Perception A1 : Receiving
AX(P) serving, maintenance, computer based assignment, C1 : Remembering
AX(T) P2 : Set A2 : Responding
AX(F) presentation skill, survey work, field study and oral) C2 : Understanding P3 : Guided Response A3 : Valuing
P4 : Mechanism A4 : Organization
: Practical Project (Project, Product, Fabrication, C3 : Applying P5 : Complex Overt Response A5 : Internalization
P6 : Adaptation
Drawing project, computer based project & simuation) C4 : Analysing
P7 : Origination
: Practical Test C5 : Evaluating

: Final Practical C6 : Creating/Designing

THIRD EDITION (PRINTED 2016)

Semester 2

Certificate In Automotive Engineering Technology 14

ASSESSMENT INSTRUMENT FORMAT
CVA21033 VEHICLE TECHNOLOGY 2

COURSEWORK FINAL
T2(F)
NO SUBJECT T1(T) A1 A2 A3 (20%)
1 Type of Assessments 10% 20% 20% 30%
2 Type Of Instruments Final (Theory)
Theory Test Practical Practical • Practical
• KI Assessment Objective & Subjective
Objective & Subjective Skill Work Skill Work
(KI-1D, KI-2A, KI-2B,
KI-4C)

Skill Work

3 Grouping/Individual Individual Individual Individual Grouping Individual

Part A 1 Task 1 Task 3 Tasks Part A
THIRD EDITION (PRINTED 2016)20 Questions Objective
Certificate In Automotive Engineering Technology 1520 Questions ObjectivePracticalPracticalPractical
100% 100% 90% (Answer all)
4 Number Of Question/Task (Answer all) 8 hours 8 hours Part B
Part B Unit 1 Unit 2 KI Assessment
10% 3 Question Structure
3 Question Subjective (Answer 2)
10 hours / task
(Answer 2) Unit 3 – 5 Part A
20 Marks
5 Total Mark Part A
40% Part B
30 Marks
Part B
60% 2 hours

6 Duration Of Assesment 1 hour Unit 1 – 5

7 Contextual Scope Unit 1 – 3

MQA-P07

COURSE LEARNING OUTCOMES (CLO) AND ASSESSMENT MATRIX

Name Of Programme : CERTIFICATE IN AUTOMOTIVE ENGINEERING TECHNOLOGY
Code & Name Of Course : CVA21033 VEHICLE TECHNOLOGY 2

NO COURSE LEARNING OUTCOMES UNITS DOMAIN & LEVEL T1(T) ASSESSMENT FINAL KI
(CLO) C2 10% COURSEWORK T2(F) X
P4 20%
Describe the construction and function of 1.Suspension System P5 X A1 A2 A3
CLO1 suspension, steering, brake, wheel alignment and 2.Steering System A3 X 20% 20% 30% X
3.Brake System X X
manual transaxle based on passenger vehicle. 4.Wheel Alignment X X
5. Manual Transmission X X
Perform the service maintenance for suspension, 1.Suspension System X X
CLO2 steering, brake, wheel alignment and manual 2.Steering System X
3.Brake System X
transaxle system according to procedure. 4.Wheel Alignment
5. Manual Transmission X
Carry out troubleshoot on suspension, steering, 1.Suspension System X
CLO3 brake, wheel alignment and manual transaxle 2.Steering System X
3.Brake System X
system according to workshop manual. 4.Wheel Alignment X
5. Manual Transmission X
Applying work as a team according to brake system 3.Brake System X
CLO4 services, wheel alighment procedure and manual 4.Wheel Alignment X
5. Manual Transmission
transmission services.
THIRD EDITION (PRINTED 2016)
Keys:Certificate In Automotive Engineering Technology 16 Ax(T) – Practical Test
T1(T) – Theory Test Ax(P) – Practical Project
Tx(N) – Numerical Theory Test Ax – Practical
Tx(Q) – Quiz Ax(F) – Final Practical
Tx(A) – Theory Assignment
Tx(F) – Final Theory

ASSESSMENT INSTRUMENT FORMAT
CVA20043 AUTOMOTIVE CONTROL SYSTEM AND DIAGNOSIS

COURSEWORK FINAL
T2(F)
NO SUBJECT T1(T) A1 A2 A3 (20%)
1 Type of Assessments 10% 20% 20% 30%
2 Type Of Instruments Final (Theory)
Theory Test Practical • Practical • Practical
• KI Assessment • KI Assessment Objective & Subjective
Objective & Subjective
(KI-1A, KI-2B) (KI-2C, KI-4C)

Skill Work Skill Work Skill Work

3 Grouping/Individual Individual Individual Grouping Grouping Individual

Part A 1 Task 1 Task 2 Tasks Part A
THIRD EDITION (PRINTED 2016)20 Questions Objective
Certificate In Automotive Engineering Technology 1720 Questions ObjectivePracticalPracticalPractical
100% 90% 90% (Answer all)
4 Number Of Question/Task (Answer all) 6 hours Part B
Part B Unit 1 KI Assessment KI Assessment
10% 10% 3 Question Structure
3 Question Subjective (Answer 2)
6 hours 8 hours / task
(Answer 2) Unit 1 Unit 2 – 3 Part A
20 Marks
5 Total Mark Part A
40% Part B
30 Marks
Part B
60% 2 hours

6 Duration Of Assesment 1 hour Unit 1 – 3

7 Contextual Scope Unit 1 – 2

MQA-P07

COURSE LEARNING OUTCOMES AND ASSESSMENT MATRIX

Name Of Programme : CERTIFICATE IN AUTOMOTIVE ENGINEERING TECHNOLOGY
Code & Name Of Course : CVA20043 AUTOMOTIVE CONTROL SYSTEM & DIAGNOSIS

NO COURSE LEARNING OUTCOMES UNITS DOMAIN & LEVEL T1(T) ASSESSMENT FINAL KI
(CLO) C2 10% COURSEWORK T2(F) X
20%
CLO1 Explain the construction and function of body 1. Body Electrical 2 X A1 A2 A3
CLO2 electrical, airbag system and engine 2. Air Bags System X 20% 20% 30% X
CLO3 management system in automotive control 3. Engine Management System X
CLO 4 systems. 1. Body Electrical 2 X XX X
2. Air Bags System C2 X X X
Describe the principle operation of body 3. Engine Management System X X
electrical, airbag system and engine 1. Body Electrical 2 X
management system. 2. Air Bags System X
3. Engine Management System P4 X
Demonstrate and carry out maintenance service 1. Body Electrical 2 X
and troubleshoot of body electrical, airbag 2. Air Bags System
system and engine management system on 3. Engine Management System
passenger vehicle.

Demonstrate work as a team according to task
given.
THIRD EDITION (PRINTED 2016)A3
Certificate In Automotive Engineering Technology 18
Keys:

Tx (T) – Theory Test Ax (T) – Practical Test
Tx (N) – Numerical Theory Test Ax (P) – Practical project
Tx (Q) – Quiz Ax – Practical
Tx (A) – Theory Assignment Ax (F) – Final (Practical)
Tx (F) – Final (Theory)

ASSESSMENT INSTRUMENT FORMAT
CVA20054 PETROL ENGINE 1

COURSEWORK FINAL
T2(F)
NO SUBJECT T1(T) A1 A2 A3 (20%)
1 Type of Assessments 10% 20% 20% 30%
2 Type Of Instruments Final (Theory)
Theory Test • Practical • Practical • Practical
• KI Assessment • KI Assessment • KI Assessment Objective & Subjective

(KI-1B) (KI-2A, KI-2C) (KI-1C, KI-4C)

Objective & Subjective Skill Work Skill Work Skill Work

3 Grouping/Individual Individual Individual Grouping Individual Individual

Part A 1 Task 1 Task 2 Tasks Part A
THIRD EDITION (PRINTED 2016)20 Questions Objective
Certificate In Automotive Engineering Technology 1920 Questions ObjectivePracticalPracticalPractical
90% 90% 90% (Answer all)
4 Number Of Question/Task (Answer all) Part B
Part B KI Assessment KI Assessment KI Assessment
10% 10% 10% 3 Question Structure
3 Question Subjective (Answer 2)
4 hours 24 hours 10 hours / task
(Answer 2) Unit 1 Unit 2 Unit 3 – 4 Part A
20 Marks
5 Total Mark Part A
40% Part B
30 Marks
Part B
60% 2 hours

6 Duration Of Assesment 1 hour Unit 1 – 4

7 Contextual Scope Unit 1 – 2

MQA-P07

COURSE LEARNING OUTCOMES (CLO) AND ASSESSMENT MATRIX

Name Of Programme : CERTIFICATE IN AUTOMOTIVE ENGINEERING TECHNOLOGY
Code & Name Of Course : CVA20054 PETROL ENGINE 1

NO COURSE LEARNING OUTCOMES UNITS DOMAIN & LEVEL ASSESSMENT FINAL KI
(CLO) C2 COURSEWORK T2(F)
C2 T1(T) 20%
10% A1 A2 A3
20% 20% 30% X
X X
Describe the principles operation of electronic fuel 1.Fuel System ( EFI ) X X
CLO1 injection system and alternative fuel system in 2.Engine General Overhaul X
3.Engine Parameter Test X
automobile petrol engine. 4.Alternative Fuel X
1.Fuel System ( EFI )
CLO2 Explain precisely construction and function of 2.Engine General Overhaul
electronic fuel injection system components. 3.Engine Parameter Test
4.Alternative Fuel
Explain verbally and carry out maintenance service 1.Fuel System ( EFI ) X
CLO3 and general overhaul electronic fuel injection 2.Engine General Overhaul P5 X
3.Engine Parameter Test
engine. X
4.Alternative Fuel P5 X

2.Engine General Overhaul A3 X X
THIRD EDITION (PRINTED 2016)CLO4Perform installation of NGV system on passenger
Certificate In Automotive Engineering Technology 20vehicle.

CLO5 Demonstrate work as a team according to the
engine general overhaul.

Keys: Ax(T) – Practical Test
T1(T) – Theory Test Ax(P) – Practical Project
Tx(N) – Numerical Theory Test Ax – Practical
Tx(Q) – Quiz Ax(F) – Final Practical
Tx(A) – Theory Assignment
Tx(F) – Final Theory

ASSESSMENT INSTRUMENT FORMAT
CKV20022 ENGINEERING SCIENCE 1

COURSEWORK FINAL
T5(F)
NO. SUBJECT T1(T) T2(T) T3(Q) T4(A) (40%)
1 Type of Assessments (20%) (20%) (10%) (10%)
Final Theory
Theory Test Theory Test Quiz Theory Assignment

2 Type of Instruments Objective & Objective & Subjective Report Objective &
3 Grouping/Individual Subjective Subjective Individual Individual Subjective

Individual Individual 1 Quiz / unit Minimum 2 Individual
assignment
Part A Part A 100% Part A
15 minutes Assignment 20 questions Objective
20 questions Objective 20 questions Objective Unit 1 – 6 100%
(Answer all)
4 Number of Question/Task (Answer all) (Answer all) Part B
Part B Part B
5 questions
(Unit 6 is compulsory

and Answer any 2
questions)

• Part A : 40%
• Part B : 60%
THIRD EDITION (PRINTED 2016)
Certificate In Automotive Engineering Technology 21
3 questions Subjective 3 questions Subjective

(Answer all) (Answer all)

5 Total Mark Part A Part A 2 weeks / assign. 2 hours
6 Duration of Assessment 40 % 40 %
Part B Part B
60 % 60 %

1 hour 1 hour

7 Contextual Scope Unit 1 – 2 Unit 3 – 5 Unit 1 – 6 Unit 1 – 6
(Refer MQA-P07)

COURSE LEARNING OUTCOMES (CLO) AND ASSESSMENT MATRIX

Name Of Programme : Certificate in Automotive Engineering Technology
Code & Name Of Course : CKV20022 Engineering Science 1

ASSESSMENT

COURSE LEARNING OUTCOMES UNITS DOMAIN & COURSEWORK FINAL
NO 1.0 Physical Quantities And Basic Units LEVEL
T1(T) T2(T) T3(Q) T4(A) T5(F)
(CLO) 20% 20% 10% 10% 40%

x xxx

CLO1 Apply the international system of unit in C3
engineering discipline.

2.0 Statics x xxx
C3
CLO2 Use the concept of force equilibrium to solve on
force problems act upon a rigid body.

3.0 Friction xxxx
C3
THIRD EDITION (PRINTED 2016)CLO3Solve the problem of friction on two horizontal
Certificate In Automotive Engineering Technology 22surface contacts.

4.0 Work xxxx
xxxx
CLO4 Apply the concept of work, energy and power in 5.0 Power C3

basic application. 6.0 Energy xxx

Keys: Cognitive Domain (Anderson) Psychomotor Domain (Simpson) Affective Domain (Bloom)

TX : Listening/Speaking/Reading/Simulation AX : Practical (labotary work, drawing, assemble, C1 : Remembering P1 : Perception A1 : Receiving
TX(T) : Theory Test P2 : Set A2 : Responding
TX(N) : Numerical Theory Test serving, maintenance, computer based assignment, C2 : Understanding A3 : Valuing
P3 : Guided Response A4 : Organization
TX(Q) : Quiz presentation skill, survey work, field study and oral) C3 : Applying A5 : Internalization
P4 : Mechanism
TX(P) : Theory Assignment with presentation AX(P) : Practical Project (Project, Product, Fabrication, C4 : Analysing
TX(A) : Theory Assignment & Report Writing P5 : Complex Overt Response
TX(F) : Final Theory or Final Presentation Drawing project, computer based project & simuationC)5 : Evaluating P6 : Adaptation
P7 : Origination
AX(T) : Practical Test C6 : Creating/Designing

AX(F) : Final Practical

COURSE LEARNING OUTCOMES (CLO) AND TEST BLUEPRINT MATRIX

Name Of Programme : Certificate in Automotive Engineering Technology

Code & Name Of Course : CKV20022 Engineering Science 1

FINAL THEORY - 40%

NO COURSE LEARNING OUTCOMES UNITS Remembering Understanding Applying Analysing Evaluating Creating/Designing NO OF
(CLO)
QUES.
CLO1 Apply the international system of unit in Objective Subjective Objective Subjective Objective Subjective Objective Subjective Objective Subjective Objective Subjective
engineering discipline.
EMD EMDEMD EMD E MD EMDEMD E M D E M D EMD EMD EMD

1.0 Physical Quantities And Basic Units 2 1 1 4

2.0 Statics 21 3 22 10
211 8
CLO2 Use the concept of force equilibrium to
solve on force problems act upon a rigid
body.

3.0 Friction 11 2

CLO3 Solve the problem of friction on two
horizontal surface contacts.
THIRD EDITION (PRINTED 2016)
Certificate In Automotive Engineering Technology 234.0 Work 11 211 6
1 211 6
CLO4 Apply the concept of work, energy and power 5.0 Power 1 1 112 6
1
in basic application. 6.0 Energy 40

NO. OF QUESTIONS 253000640000000965

Keys: C1 – Remembering E – Easy Level Of Construct (C1:C2:C3:C4:C5:C6) = 10 : 10 : 20 : 0 : 0 : 0
TX : Listening/Speaking/Reading/Simulation C2 – Understanding M – Medium Level Of Difficulty (E : M : D) = 4: 4 : 2
C3 – Applying D – Difficult
TX(T) : Theory Test C4 - Analysing
TX(N) : Numerical Theory Test C5 - Evaluating
TX(Q) : Quiz C6 - Creating/Designing
TX(P) : Theory Assignment with presentation
TX(A) : Theory Assignment & Report Writing
TX(F) : Final Theory or Final Presentation

THIRD EDITION (PRINTED 2016)

Semester 3

Certificate In Automotive Engineering Technology 24

ASSESSMENT INSTRUMENT FORMAT
CVA31064 VEHICLE TECHNOLOGY 3

COURSEWORK FINAL
A3(F)
NO SUBJECT T1(P) A1 A2 (20%)
1 Type of Assessments 20% 30% 30%
• Practical
• Field study • Practical • Practical • KI Assessment
• KI Assessment • KI Assessment • KI Assessment
(KI-1D, KI-3A)
(KI-1A, KI-1C, KI-2A, KI-2B, KI- (KI-4A) (KI-4C)
2C, KI-3A, KI-3B, KI-4A, KI-4C, Skill Work
KI-6A, KI-6B, KI-6C). Skill Work
Individual
2 Type Of Instruments Field Study Assessment Skill Work Grouping
(Written Report, Presentation Skills, 1 Task
3 Tasks Practical
Peer Assessment, Log Book) Practical
& 90%
90% KI Assessment
Document KI-04 KI Assessment
THIRD EDITION (PRINTED 2016) 10%
3 Grouping/IndividualCertificate In Automotive Engineering Technology 25GroupingGrouping 10% 2 hours
6 hours / task Unit 1 – 6
4 Number Of Question/Task 1 Task 3 Tasks
Unit 4 – 6
5 Total Mark Field Study Practical
64 % 90%
6 Duration Of Assesment
7 Contextual Scope KI Assessment KI Assessment
36 % 10%

2 weeks 7 hours / task

Unit 1 – 6 Unit 1 – 3

MQA-P07

COURSE LEARNING OUTCOMES AND ASSESSMENT MATRIX

Name Of Programme : CERTIFICATE IN AUTOMOTIVE ENGINEERING TECHNOLOGY
Code & Name Of Course : CVA31064 VEHICLE TECHNOLOGY 3

ASSESSMENT

NO COURSE LEARNING OUTCOMES UNITS DOMAIN & LEVEL COURSEWORK KI
(CLO)
T1(P) A1 A2 A4(F)

20% 30% 30% 20%

CLO1 Describe the construction and function of 1. Automatic Transmission C2 x
CLO2 automatic transmission, ABS, power steering 2. ABS
CLO3 system, four wheel drive, differential unit and 3. Power Steering System x
CLO4 axle based on passenger vehicle. 4. Four Wheel Drive x
5. Differential Unit and Axle x
Perform troubleshoot on automatic transmission, 6. Road Testing P4
ABS, power steering system, four wheel drive, 1. Automatic Transmission
differential unit and axle according to workshop 2. ABS x
specification. 3. Power Steering System x
4. Four Wheel Drive x
Explain verbally and carry out maintenance 5. Differential Unit and Axle x
service and overhaul procedure of automatic 6. Road Testing x
transmission, ABS, power steering system, four 1. Automatic Transmission x
wheel drive, differential unit and axle according 2. ABS P4 x
to workshop manual. 3. Power Steering System x
4. Four Wheel Drive x
Demonstrate work as a team according to road 5. Differential Unit and Axle x
test and analyze result of road testing. 6. Road Testing x
1. Automatic Transmission x
2. ABS x
3. Power Steering System A3 x
4. Four Wheel Drive x
5. Differential Unit and Axle x
6. Road Testing x
THIRD EDITION (PRINTED 2016)
Keys:Certificate In Automotive Engineering Technology 26

Tx (T) – Theory Test Ax (T) – Practical Test
Tx (N) – Numerical Theory Test Ax (P) – Practical project
Tx (Q) – Quiz Ax – Practical
Tx (A) – Theory Assignment Ax (F) – Final (Practical)
Tx (F) – Final (Theory)

ASSESSMENT INSTRUMENT FORMAT
CVA31073 PETROL ENGINE 2

COURSEWORK FINAL
T2(F)
NO SUBJECT T1(T) A1 A2 A3 (20%)
1 Type of Assessments 10% 20% 20% 30%
2 Type Of Instruments Final (Theory)
Theory Test • Practical • Practical • Practical
• KI Assessment • KI Assessment • KI Assessment Objective &
Subjective
(KI-1B & KI-4C) (KI-1B & KI-4C) (KI-1B, KI-2A, KI-4C)

Objective & Subjective Skill Work Skill Work Skill Work

3 Grouping/Individual Individual Individual Individual Grouping Individual

THIRD EDITION (PRINTED 2016)Part A1 task2 tasksPart A
Certificate In Automotive Engineering Technology 27 20 Questions Objective
20 Questions Objective Practical Practical
90% 90% (Answer all)
4 Number Of Question/Task (Answer all) 1 task Part B
Part B KI Assessment KI Assessment
10% 10% 3 Question Structure
3 Question Subjective (Answer 2)
8 hours 10 hours / task
(Answer 2) Unit 2 Unit 3 & 5 Part A
20 Marks
5 Total Mark Part A Practical Part B
40 Marks 90% 30 Marks

Part B KI Assessment 2 hours
60 Marks 10%
Unit 1 – 5
6 Duration Of Assesment 1 hour 12 hours

7 Contextual Scope Unit 1 – 3 Unit 1

MQA-P07

COURSE LEARNING OUTCOMES AND ASSESSMENT MATRIX

Name Of Programme : CERTIFICATE IN AUTOMOTIVE ENGINEERING TECHNOLOGY
Code & Name Of Course : CVA31073 PETROL ENGINE 2

ASSESSMENT

NO COURSE LEARNING OUTCOMES UNITS DOMAIN & LEVEL COURSEWORK FINAL KI
(CLO) C2 X
T1(P) A1 A2 A3 T2(F)
C2 10%
P4 20% 20% 30% 20%
P4 X
1. Turbocharger A3 X X
2. Supercharger X
CLO1 Understand the principle operation of force 3. Emission control system X
induction system , emission control system and 4. Engine Enhancement
engine enhancement on automobile petrol engine. 5. EFI Engine Diagnostic X
1. Turbocharger
2. Supercharger X
3. Emission control system
4. Engine Enhancement X
5. EFI Engine Diagnostic
1. Turbocharger X
2. Supercharger
Explain precisely construction and function of force 3. Emission control system X
CLO2 induction system , emission control system and 5. EFI Engine Diagnostic
1. Turbocharger X
engine enhancement components. 2. Supercharger
3. Emission control system X
5. EFI Engine Diagnostic
3. Emission control system X
5. EFI Engine Diagnostic
X

Perform inspection on turbocharger, supercharger X
CLO3 and emission control system based on workshop
X
specification.

THIRD EDITION (PRINTED 2016)X
Certificate In Automotive Engineering Technology 28
X

Explain verbally and carry out the engine parameter X
CLO4 test and troubleshooting using diagnostic scan tool
X
and exhaust gas analyzer.

X

CLO5 Demonstrate work as a team according to task X
given.
X

Keys:

Tx (T) – Theory Test Ax (T) – Practical Test
Tx (N) – Numerical Theory Test Ax (P) – Practical project
Tx (Q) – Quiz Ax – Practical
Tx (A) – Theory Assignment Ax (F) – Final (Practical)
Tx (F) – Final (Theory)

ASSESSMENT INSTRUMENT FORMAT
CVV30032 AUTOMOTIVE AIR-CONDITIONING

COURSEWORK FINAL
T2(F)
NO SUBJECT T1(T) A1 A2 A3 20%
1 Type of Assessments 10% 20% 20% 30%
2 Type Of Instruments • Practical Final Theory
Theory Test • Practical • Practical • KI Assessment
• KI Assessment • KI Assessment (KI-2A, KI-3A & Objective &
Objective & KI-5A) Subjective
Subjective (KI-1D & KI-4A) (KI-1D)
Skill Work
Skill Work Skill Work

3 Grouping/Individual Individual Individual Individual Grouping Individual

Part A 1 Task 1 Task 1 Task Part A
THIRD EDITION (PRINTED 2016)20 Questions Objective
Certificate In Automotive Engineering Technology 2920 Questions ObjectivePracticalPracticalPractical
90% 90% 90% (Answer all)
4 Number Of Question/Task (Answer all) Part B
Part B KI Assessment KI Assessment KI Assessment
10% 10% 10% 3 Question Structure
3 Question Subjective (Answer 2)
8 hours 8 hours 12 hours
(Answer 2) Unit 3 Unit 3 Unit 3 – 4 Part A
20 Marks
5 Total Mark Part A
40% Part B
30 marks
Part B
60% 2 hours

6 Duration Of Assesment 1 hour Unit 1 – 4

7 Contextual Scope Unit 1 – 2

MQA-P07

COURSE LEARNING OUTCOMES (CLO) AND ASSESSMENT MATRIX

Name Of Programme : CERTIFICATE IN AUTOMOTIVE ENGINEERING TECHNOLOGY

Code & Name Of Course : CVV30032 AUTOMOTIVE AIR CONDITIONING

NO COURSE LEARNING OUTCOMES UNITS DOMAIN & LEVEL ASSESSMENT FINAL KI
(CLO) COURSEWORK T2(F) X
T1(T) 20%
10% A1 A2 A3
20% 20% 30% X
X X
CLO1 Explain principles operation of air-conditioning 1.Basic Air Conditioning Theory C2 X
system in automobile passenger vehicle. 2.Basic System Components C2 X
3.Service & Repair Air Conditioning X
CLO2 Describe construction and function of automotive System X X
air-conditioning components. 4.Electronic Temperature Control System X
1.Basic Air Conditioning Theory X
2.Basic System Components X
3.Service & Repair Air Conditioning System X
4.Electronic Temperature Control System

Explain verbally and carry out maintenance service 3.Service & Repair Air Conditioning System XXX
CLO3 and troubleshooting of air conditioning system on 4.Electronic Temperature Control System X

passenger vehicle.
THIRD EDITION (PRINTED 2016)P5
Certificate In Automotive Engineering Technology 30
CLO4 Demonstrate work as a team according to task 3.Service & Repair Air Conditioning System A3 X
given. 4.Electronic Temperature Control System X

Keys: Ax(T) – Practical Test
T1(T) – Theory Test Ax(P) – Practical Project
Tx(N) – Numerical Theory Test Ax – Practical
Tx(Q) – Quiz Ax(F) – Final Practical
Tx(A) – Theory Assignment
Tx(F) – Final Theory

ASSESSMENT INSTRUMENT FORMAT
CVA30083 AUTOMOTIVE DIESEL ENGINE

COURSEWORK FINAL

NO SUBJECT T1(T) A1 A2 A3 T2(F)
10% 20% 20% 30% (20%)
1 Type of Assessments
2 Type Of Instruments Theory Test • Practical • Practical • Practical Theory Test
3 Grouping/Individual • KI Assessment • KI Assessment • KI Assessment
4 Number Of Question/Task Objective & Objective &
Subjective (KI-1B, KI-1C, KI- (KI-1B, KI-1C, KI- (KI-1B, KI-1C, KI- Subjective
5 Total Mark 2B, KI-4C) 2B, KI-4C) 2B, KI-4C)
6 Duration Of Assesment Individual Individual
7 Contextual Scope Skill Work Skill Work Skill Work
Part A Part A
20 Questions Objective Grouping Grouping Grouping 20 Questions Objective

THIRD EDITION (PRINTED 2016)(Answer all)1 task2 tasks2 tasks(Answer all)
Certificate In Automotive Engineering Technology 31Part B Part B
Practical Practical Practical
3 Question Subjective 90% 90% 90% 3 Question Structure
(Answer 2) (Answer 2)
Part A KI Assessment KI Assessment KI Assessment Part A
40% 10% 10% 10% 20 Marks
Part B Part B
60% 14 hours 8 hours / task 8 hours / task 30 Marks

1 hour Unit 1 Unit 3 – 4 Unit 5 – 6 2 hours

Unit 1 – 3 Unit 1 – 6

MQA-P07

COURSE LEARNING OUTCOMES (CLO) AND ASSESSMENT MATRIX

Name Of Programme : CERTIFICATE IN AUTOMOTIVE ENGINEERING TECHNOLOGY
Code & Name Of Course : CVA30083 AUTOMOTIVE DIESEL ENGINE

NO COURSE LEARNING OUTCOMES UNITS DOMAIN & T1(T) ASSESSMENT FINAL KI
(CLO) LEVEL 10% COURSEWORK T2(F) x
20%
CLO1 Explain basic principle operation diesel of 1. Diesel Fuel System C2 x A1 A2 A3
automobile engine. 2. Combustion Chambers x 20% 20% 30% x
3. Preheating System x x
4. Diesel Fuel Injection Pump x x
CLO2 Describe the construction and function of 5. Fuel Injection Pump Calibrate Machine x x x
mechanical diesel fuel system , preheating 6. Electronic Diesel Fuel Injection x x x
system and electronic fuel injection system. 1. Diesel Fuel System x x x
2. Combustion Chambers C2 x x
3. Preheating System x
4. Diesel Fuel Injection Pump x x
5. Fuel Injection Pump Calibrate Machine x x
6. Electronic Diesel Fuel Injection x x
1. Diesel Fuel System x x
3. Preheating System x
4. Diesel Fuel Injection Pump
5. Fuel Injection Pump Calibrate Machine
6. Electronic Diesel Fuel Injection
1. Diesel Fuel System
3. Preheating System
4. Diesel Fuel Injection Pump
5. Fuel Injection Pump Calibrate Machine
6. Electronic Diesel Fuel Injection
CLO3 THIRD EDITION (PRINTED 2016)Carry out overhaul and calibration of diesel fuelP4
Certificate In Automotive Engineering Technology 32injection pump according to specification. A3

CLO4 Demonstrate work as a team according to task
given.

Keys:

Tx (T) – Theory Test Ax (T) – Practical Test
Tx (N) – Numerical Theory Test Ax (P) – Practical project
Tx (Q) – Quiz Ax – Practical
Tx (A) – Theory Assignment Ax (F) – Final (Practical)
Tx (F) – Final (Theory)