LED WALL / CEILING MOUNT - W44
PRODUCT HIGHLIGHTS INTERIOR/AMBIENT
• Designed for either wall, ceiling or pendant mounting.
• Versatile linear choice. The cross-section dimensions allow this efficient luminaire to fit
into most architectural spaces conveniently and unobtrusively.
• The entire series is a singular cross-section, allowing for long row composition
• Acrylic diffuser incorporates a well-defined linear prism design.
LEDs - Use of closely-spaced medium-power, high-brightness chips minimizes pixelation and
provides uniform lens luminance. Available in Cool White (5000K), Neutral White (4000K)
and Warm White (3500K) color temperatures. CRI >= 80 (CW > 70). LM-80 reports
available.
CONSTRUCTION - The housing and end plates are die-formed code gauge cold-rolled steel.
LENS - One-piece frosted extruded wrap around acrylic prismatic lens standard. DIMENSIONS
ELECTRICAL - Universal voltage (120-277 Vac) input, 50/60 Hz. Power factor > 0.9, THD <
20%, in-rush current < 15 Amps.
DRIVER – High-performance isolated driver features over-voltage, over-current and short- A B
circuit (with auto-recovery) protection. Driver module is sealed to IP66 protection levels,
with a Class A sound rating. 0-10V dimming standard. (B)
4-3/8” (109mm)
FINISH - All reflective surfaces are finished with a high reflectance, lighting fixture white B 4-3/8” (109mm) A
polyester powder. 4-3/8” (109mm) WALL
MOUNT
WARRANTY - Limited 5-year warranty. CEILING
LISTING - UL Listed to U.S. and Canadian safety standards. Suitable for damp locations. MOUNT LENGTH
24-3/16” (614mm)
IBEW Union made in the U.S.A Fixture (A) 48-3/16” (1223mm)
96-3/16” (2442mm)
W44-2’ 4-11/16” (119mm)
W44-4’ 4-11/16” (119mm)
This product, or selected versions of this product, meet the standards listed below. Please consult factory W44-8’ 4-11/16” (119mm)
for your specific requirements.
ARRA LIGHT OUTPUT - LED W442, W444
Funding Compliant W442 W444
Lumens Watts LPW Watts
damp location 35
Lumens 43 LPW
93
Neutral White SS 2780 29 96 3250
106
HO - - - 4540
LED Chips are frequently updated therefore values may increase.
ORDERING INFORMATION
W444TYPICAL ORDER EXAMPLE: LED SS CW UE EM
Prefix Light Drive Current Color Temperature Voltage Options
W442 - 2-foot Source SS -Super Saver CW - Cool White UE - EM - Emergency Pack
W444 - 4-foot LED HO - High Output NW - Neutral White PM - Prewired Plug-in (See options page)
W448 - 8-foot WW - Warm White Universal SD50 - Step Dimmong to 50%
Electronic
(120-277V)
347 - 347V
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
Description Order Number
Joiner Band JBW44
Pendant Mount Kit (3/8” IP Stems) PMK
LED
Project Name Fixture Type © 2015
Catalog # LSI INDUSTRIES INC.
149
INTERIOR/AMBIENT LED STRIP - S
DIMENSIONS 4-3/8” PRODUCT HIGHLIGHTS
(111mm) • Accepts optional plug-in wiring feature for continuous row installation
2” • Alignment couplers furnished for continuous row instatallation
(52mm) • Channel cover equipped with quarter-turn, captive fasteners for easy access to ballast
compartment
48”
(1221mm) EXPECTED LIFE - Projected life of at least 60,000 hours. Contact factory for TM-21 detail.
LEDS - Use of closely-spaced medium-power, high-brightness chips minimizes pixelation and
LIGHT OUTPUT - S STRIP
provides uniform lens luminance. Available in Cool White (5000K), Neutral White (4000K)
Lumens (Nominal) and Warm White (3500K) color temperatures. CRI >= 80 (CW > 70). LM-80 reports
available.
S 2 LW - 2FT WW NW CW Watts CONSTRUCTION - Fixture housing, end sections, and channel cover constructed of code-guage,
S 2 SS - 2FT 1455 1498 1777 14 die-formed steel.
S 4 LW - 4FT 2584 3076 3063 28 FINISH - All metal parts are painted after fabrication following treatment with phosphate rust
S 4 SS - 4FT 3061 3184 3741 29 inhibitor. Finish coating of housing reflecting surfaces is with high-reflectance (minimum 92%)
S 4 HO - 4FT 3514 3690 4294 34 polyester powder.
S 4 VHO - 4FT 4955 5120 5988 44 ELECTRICAL - Universal voltage (120-277 Vac) input, 50/60Hz, 347VAC. Power factor > 0.9, THD <
S 8 LW - 8FT 6059 6354 7404 57 20%, in-rush current < 15 Amps.
S 8 SS - 8FT 6122 6369 7481 58 DRIVER - High-performance isolated driver features over-voltage, over-current and short-circuit
S 8 HO - 8FT 7029 7379 8588 68 (with auto-recovery) protection. Driver module is sealed to IP66 protection levels, with a Class A
S 8 VHO - 8FT 9910 10240 11875 88 sound rating. 0-10 volt dimming standard.
12118 12707 14809 114 WARRANTY - Limited 5-year warranty.
PHOTOMETRICS - Please visit our we site at www.lsi-industries.com for detailed photometric data.
LISTING - Listed to UL 1598 and UL 8750. Suitable for damp locations.
This product, or selected versions of this product, meet the standards listed below. Please consult factory
for your specific requirements.
ARRA
Funding Compliant damp location
LED Chips are frequently updated therefore values may increase.
ORDERING INFORMATION
STYPICAL ORDER EXAMPLE: 4 LED HO CW UE
Prefix Length Light Lumen Color Line Voltage Options
S - Strip 2 - 2 foot Source Output Temperature UE - Universal EM - 1100 Lumen Emergency Battery Pack1
4 - 4 foot LW - Low Watt CW - Cool White SD50 - Step Dimmong to 50%
8 - 8 foot LED SS - Super saver WW - Warm White Electronic PM - Pre-wired Plug-in Assembly (specify circuitry.
HO - High Output3 NW - Neutral White (120-277V)
VHO - Very High Output3 347-347V See Options/Accessories Section)
ACCESSORY ORDERING INFORMATION (Accessories are field installed) 1- Emergency Battery Pack not available on 2ft fixture.
2- 8ft fixture requires (2) wire guards.
Description Order Number 3- HO and VHO for 4 ft. & 8ft. fixtures only.
LED Wire Guard - 4 foot WG2402
Grid Hanger GH
Chain Hanger Set (36" length) CHS3
T-bar Kits
(includes junction box, wire collar, & grid hangers) TBKT
Project Name Fixture Type © 2015
LSI INDUSTRIES INC.
150 Catalog #
LED LENSED STRIP - SDL
PRODUCT HIGHLIGHTS INTERIOR/AMBIENT
• Accepts optional plug-in wiring feature for continuous row installation
• Alignment couplers furnished for continuous row instatallation
• Channel cover equipped with quarter-turn, captive fasteners for easy access to ballast
compartment
EXPECTED LIFE - Projected life of at least 60,000 hours. Contact factory for TM-21 detail. DIMENSIONS 4-3/8”
LEDS - Use of closely-spaced medium-power, high-brightness chips minimizes pixelation and (111mm)
provides uniform lens luminance. Available in Cool White (5000K), Neutral White (4000K) 4-1/8”
and Warm White (3500K) color temperatures. CRI >= 80 (CW > 70). LM-80 reports (104mm)
available.
CONSTRUCTION - Fixture housing, end sections, and channel cover constructed of code-guage, 48”
die-formed steel. (1221mm)
LENS - Specially designed frosted extruded lens with micro prisms for maximum source diffusion
and soft, even illumination. LIGHT OUTPUT - SDL LENSED STRIP
FINISH - All metal parts are painted after fabrication following treatment with phosphate rust
inhibitor. Finish coating of housing reflecting surfaces is with high-reflectance (minimum 92%) Lumens (Nominal)
polyester powder.
ELECTRICAL - Universal voltage (120-277 Vac) input, 50/60Hz, 347 VAC. Power factor > 0.9, THD WW NW CW Watts
< 20%, in-rush current < 15 Amps. SDL 2 LW - 2FT 1378 1368 1581 14
DRIVER - High-performance isolated driver features over-voltage, over-current and short-circuit SDL 2 SS - 2FT 2253 2887 2740 28
(with auto-recovery) protection. Driver module is sealed to IP66 protection levels, with a Class A SDL 4 LW - 4FT 2777 2875 3426 29
sound rating. 0-10 volt dimming standard. SDL 4 SS - 4FT 3216 3365 4056 34
WARRANTY - Limited 5-year warranty. SDL 4 HO - 4FT 4424 4620 5441 44
PHOTOMETRICS - Please visit our we site at www.lsi-industries.com for detailed photometric data. SDL 4 VHO - 4FT 5263 5524 6689 57
LISTING - Listed to UL 1598 and UL 8750. Suitable for damp locations. For a list of the specific SDL 8 LW - 8FT 5553 5750 6852 58
products in this series that are DLC listed, please consult the LED Lighting section of our SDL 8 SS - 8FT 6432 6730 8112 68
website or the Design Lights website at www.designlights.org. SDL 8 HO - 8FT 8847 9240 10882 88
SDL 8 VHO - 8FT 10526 11048 13378 114
This product, or selected versions of this product, meet the standards listed below. Please consult factory
for your specific requirements.
ARRA damp location
Funding Compliant
LED Chips are frequently updated therefore values may increase.
ORDERING INFORMATION
SDLTYPICAL ORDER EXAMPLE: 4 LED HO CW UE
Prefix Length Light Lumen Color Line Voltage Options
Source Output Temperature UE - Universal EM - Emergency Battery Pack1
SDL - Strip With 2 - 2 foot LW - Low Watt CW - Cool White SD50 - Step Dimmong to 50%
Diffused Lens 4 - 4 foot LED SS - Super saver WW - Warm White Electronic PM - Pre-wired Plug-in Assembly (specify circuitry
8 - 8 foot HO - High Output3 NW - Neutral White (120-277V)
VHO - Very High Output3 347-347V See Options/Accessories Section)
ACCESSORY ORDERING INFORMATION (Accessories are field installed) 1- Emergency Battery Pack not available on 2ft fixture.
2- 8ft fixture requires (2) wire guards.
Description Order Number 3- HO and VHO for 4 ft. & 8ft. fixtures only.
Grid Hanger GH Fixture Type
Chain Hanger Set (36" length) CHS3
Chain Hanger Set (60" length) CHS5
Wire Guard - 4 foot WG2402
T-bar Kits
(includes junction box, wire collar, & grid hangers) TBKT LED
Project Name © 2015 151
Catalog # LSI INDUSTRIES INC.
INTERIOR/AMBIENT LED INTERIOR RETAIL CEILING LIGHT (CIRUS)
US patents 8382334, 8215799, 7952293 and US & Int’l. patents pending.
SMARTTEC™ ENERGY SAVING FEATURES
THERMAL CONTROL - LSI drivers feature integral sensor which reduces drive current, when
ambient temperatures exceeds rated temperature.
HOUSING - Low profile, durable die-cast, aluminum construction, providing a reliable
weather-tight seal.
LEDS - Features a choice of two arrays of select, mid-power, high brightness, high efficiency
LED chips; CW - 5000K color temperature, 70 CRI (nominal) or NW - 4000K color
temperature, 80 CRI (nominal).
DRIVE CURRENT - Choice of Low Wattage (LW) or Super Saver (SS)
OPTICS / DISTRIBUTION - Available with (SC) standard ceiling distribution, which directs
light through a clear tempered glass lens, to provide a uniform distribution of light to
vertical and horizontal surfaces.
DOE LIGHTING FACTS OPTICAL UNIT - Features an ultra-slim 3/4” profile die cast housing, with a clear tempered
Department of Energy has verified representative product test glass lens. Unit is water-resistant, sealed to an IP67 rating. Integral designed heat sink
data and results in accordance with its Lighting Facts Program. does not trap dirt and grime, ensuring cool running performance over the life of the fixture.
Visit www.lightingfacts.com for specific catalog strings.
PRESSURE STABILIZING VENT - Luminaire assembly incorporates a pressure stabilizing vent
LIGHT OUTPUT - CIRUS breather to prevent seal fatigue and failure.
Lumens Watts LPW DRIVER - State-of-the-art driver technology superior energy-efficiency and optimum light
output. LSI driver components are fully encased in potting for IP65 moisture resistance.
Clear Diffused Clear Diffused Clear Diffused Complies with IEC and FCC standards.
Cool SS - Super Saver 13,550 11,709 114 114 119 103 DRIVER HOUSING - Fabricated aluminum, driver/electrical enclosure is mounted to back of
White optical assembly to provide easy “knock-out” connection of primary wiring.
LW - Low Watt 10,870 9,344 87 87 124 107
OPERATING TEMPERATURE - -40°C to 40°C (-40°F to +104°F)
Neutral SS - Super Saver 11,646 10,087 114 114 103 89 ELECTRICAL - Voltage specific power supply, 120-277 VAC, 50/60 HZ input. LSI drivers
White LW - Low Watt 9,314 7,985 87 87 107 92
meets IEEE C62.41.2-2002, Scenario 1, Location Category C.
LED Chips are frequently updated therefore values may increase. FINISH - Standard color is white and is finished with LSI’s DuraGrip polyester powder coat
process. DuraGrip withstands extreme weather changes without cracking or peeling.
INSTALLATION - Pre-assembled standard unit installs in interior T-bar grid ceiling
applications via a choice of 2x2 mounting pan or flange kit. Mounting pan includes
earthquake clips to secure fixture in grid ceiling. Accessory flange kit available for installing
in drywall or plaster. Low profile design requires only 12” minimum clearance.
SHIPPING WEIGHT - 20 pounds.
EXPECTED LIFE - Minimum 60,000 to 100,000 hours depending upon the ambient
temperature of the installation location. See LSI web site for specific guidance.
WARRANTY - Limited 5-year warranty.
LISTING - UL listed to UL 1598, UL 8750 and other U.S. and International safety standards.
Suitable for damp locations. For a list of the specific products in this series that are DLC
listed, please consult the LED Lighting section of our website or the Design Lights website
at www.designlights.org.
PHOTOMETRICS - Applications layouts are available upon request
This product, or selected versions of this product, meet the standards listed below. Please consult factory
for your specific requirements.
IP65
damp location
LED
Project Name Fixture Type © 2015
LSI INDUSTRIES INC.
152 Catalog #
LED INTERIOR RETAIL CEILING LIGHT (CIRUS) 2x2 WHT DFL INTERIOR/AMBIENT
LUMINAIRE ORDERING INFORMATION
CIRUSTYPICAL ORDER EXAMPLE: SC LED SS NW 120
Prefix Distribution Light Source Drive Current Color Line Mounting Finish Options
LW - Low Watt Temperature Voltage 2x2 - 2x2 T-bar WHT - White DIM - 0-10v Dimming
CIRUS- SC - Standard LED SS - Super Saver CW - Cool White 120 - 120V Grid Ceiling DFL - Diffused Lens
Crossover Interior NW - Neutral 208 - 208V
Retail Ceiling White 240 - 240V
277 - 277V
347 - 347V
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
Description Order Number
2x2 Flange Kit FK221
FOOTNOTES:
1 - FK22 is used for mounting to Sheetrock or Drywall ceilings. It requires attaching via framing members or suspending from structure.
DIMENSIONS 23 3/4”
(604 mm)
10 3/8” 3 1/2” 6 1/8”
(265 mm) (88 mm) (157 mm)
7/8”
15 7/8” 23 3/4” 7 1/8” (22 mm)
(404 mm) (604 mm) (180 mm)
3/4” 2 3/4”
(19 mm) (70 mm)
Requires minimum 12” clearance above ceiling for installation.
Flange Kit LED
Project Name Fixture Type © 2015
Catalog # LSI INDUSTRIES INC.
153
INTERIOR/AMBIENT LED INTERIOR RETAIL CEILING LIGHT (CIRU)
US patents 8382334, 8215799, 7952293 and US & Int’l. patents pending.
SMARTTEC™ ENERGY SAVING FEATURES
THERMAL CONTROL - LSI drivers feature integral sensor which reduces drive current, when
ambient temperatures exceeds rated temperature.
HOUSING - Low profile, durable die-cast, aluminum construction, providing a reliable
weather-tight seal.
LEDS - Features a choice of two arrays of select, mid-power, high brightness, high efficiency
LED chips; CW - 5000K color temperature, 70 CRI (nominal) or NW - 4000K color
temperature, 80 CRI (nominal).
DRIVE CURRENT - Choice of High Output (HO) or Very High Output (VHO).
OPTICS / DISTRIBUTION - Available with (SC) standard ceiling distribution, which directs
light through a clear tempered glass lens, to provide a uniform distribution of light to
vertical and horizontal surfaces.
DOE LIGHTING FACTS OPTICAL UNIT - Features an ultra-slim 3/4” profile die cast housing, with a clear tempered
Department of Energy has verified representative product test glass lens. Unit is water-resistant, sealed to an IP67 rating. Integral designed heat sink
data and results in accordance with its Lighting Facts Program. does not trap dirt and grime, ensuring cool running performance over the life of the fixture.
Visit www.lightingfacts.com for specific catalog strings.
PRESSURE STABILIZING VENT - Luminaire assembly incorporates a pressure stabilizing vent
breather to prevent seal fatigue and failure.
LIGHT OUTPUT - CIRU DRIVER - State-of-the-art driver technology superior energy-efficiency and optimum light
output. LSI driver components are fully encased in potting for IP65 moisture resistance.
Lumens Watts LPW Complies with IEC and FCC standards.
Clear Diffused Clear Diffused Clear Diffused DRIVER HOUSING - Fabricated aluminum, driver/electrical enclosure is mounted to back of
optical assembly to provide easy “knock-out” connection of primary wiring.
Cool VHO - Very High Output 23,523 20,619 196 196 120 105
White OPERATING TEMPERATURE - -40°C to 40°C (-40°F to +104°F)
HO - High Output 19,630 17,078 150 153 131 112 ELECTRICAL - Voltage specific power supply, 120-277 VAC, 50/60 HZ input. LSI drivers
Neutral VHO - Very High Output 20,190 17,458 197 197 102 89 meets IEEE C62.41.2-2002, Scenario 1, Location Category C.
White FINISH - Standard color is white and is finished with LSI’s DuraGrip polyester powder coat
HO - High Output 16,705 14,872 151 151 111 98
process. DuraGrip withstands extreme weather changes without cracking or peeling.
LED Chips are frequently updated therefore values may increase.
INSTALLATION - Pre-assembled standard unit installs in interior T-bar grid ceiling
applications via a choice of 2x2 mounting pan or flange kit. Mounting pan includes
earthquake clips to secure fixture in grid ceiling. Accessory flange kit available for installing
in drywall or plaster. Low profile design requires only 12” minimum clearance.
SHIPPING WEIGHT - 20 pounds.
EXPECTED LIFE - Minimum 60,000 to 100,000 hours depending upon the ambient
temperature of the installation location. See LSI web site for specific guidance.
WARRANTY - Limited 5-year warranty.
LISTING - UL listed to UL 1598, UL 8750 and other U.S. and International safety standards.
Suitable for damp locations. For a list of the specific products in this series that are DLC
listed, please consult the LED Lighting section of our website or the Design Lights website
at www.designlights.org.
PHOTOMETRICS - Applications layouts are available upon request.
This product, or selected versions of this product, meet the standards listed below. Please consult factory
for your specific requirements.
IP65
damp location
LED
Project Name Fixture Type © 2015
LSI INDUSTRIES INC.
154 Catalog #
LED INTERIOR RETAIL CEILING LIGHT (CIRU) 2x2 WHT DFL INTERIOR/AMBIENT
LUMINAIRE ORDERING INFORMATION
CIRUTYPICAL ORDER EXAMPLE: SC LED HO NW 120
Prefix Distribution Light Source Drive Current Color Line Mounting Finish Options
Temperature Voltage 2x2 - 2x2 T-bar WHT - White DIM - 0-10v Dimming
CIRU- SC - Standard LED HO - High Output CW - Cool White 120 - 120V Grid Ceiling DFL - Diffused Lens
Crossover Interior VHO - Very High Output NW - Neutral 208 - 208V
Retail Ceiling White 240 - 240V
277 - 277V
347 - 347V
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
Description Order Number
2x2 Flange Kit FK221
FOOTNOTES:
1 - FK22 is used for mounting to Sheetrock or Drywall ceilings. It requires attaching via framing members or suspending from structure.
DIMENSIONS 23 3/4” 10 3/8”
(604 mm) (262 mm)
6”
20 3/4” 23 3/4” 7” (155 mm) 3/4”
(528 mm) (604 mm) (177 mm) (19 mm)
3/4”
3/4” (19 mm)
(19 mm)
3 1/2” (88 mm)
2 3/4” (70 mm)
Requires minimum 12” clearance above ceiling for installation.
Flange Kit LED
Project Name Fixture Type © 2015
Catalog # LSI INDUSTRIES INC.
155
INTERIOR/AMBIENT LED AUGUSTA® (AUD, AUP)
DOE LIGHTING FACTS ENERGY SAVING CONTROL OPTION - DIM - 0-10 volt dimming enabled with controls by
Department of Energy has verified representative product test others.
data and results in accordance with its Lighting Facts Program.
Visit www.lightingfacts.com for specific catalog strings. EXPECTED LIFE - Minimum 60,000 to 100,000 hours depending upon the ambient
temperature of installation location.
LIGHT OUTPUT - LED AUGUSTA (Clear Refractor)
LEDS - Select high-brightness LEDs in Cool White (5000K nominal), Neutral White (4000K
Lumens (Nominal) Watts LPW nominal) or Warm White (3500K nominal) color temperature, CRI > 80 (CW > 70)
Sag Lens Flat Lens Open (nominal) (Open) nominal.
Warm Neutral Cool SS 6460 6600 7000 59 119 DISTRIBUTION PATTERN - Symmetrical distribution with vertically tower-mounted LEDs.
White White White HO 9410 9420 9860 84 117 HOUSING - Round one-piece die-cast aluminum with powder coated galvannealed ballast
SS 5750 5860 6200 59 105
HO 8270 8300 8700 84 104 cover.
SS 5630 5750 6090 59 103 REFRACTOR/LENS/GASKET - 16” diameter injection molded acrylic prismatic refractors
HO 8150 8160 8560 84 102
are available (clear or frosted), and with a choice of no bottom lens (open) or with sag
LIGHT OUTPUT - LED AUGUSTA (Frosted Refractor) clear acrylic lens or flat clear acrylic lens. A silicon gasket seals the refractor to the ballast
cover. Refractor is permanently secured to the ballast housing while bottom lens is
Lumens (Nominal) Watts LPW attached with a spring loaded clamp band.
Sag Lens Flat Lens Open (nominal) (Open) MOUNTING - Direct: Includes a hinged galvanized mounting plate with keyholes and captive
screw for easy installation to a 4” square or octagonal junction box. An EPDM gasket seals
Warm Neutral Cool SS 7070 7110 7340 59 124 the plate to the housing.
White White White HO 9350 9480 9720 84 116 Pendant: Includes a powder coated, die-cast aluminum, hinged pendant mount box that is
SS 6300 6320 6540 59 111 provided with an adjustable conduit hub for hang-straight applications. For use with 3/4”
HO 8780 8820 9120 84 109 rigid conduit.
SS 6200 6210 6420 59 109 ELECTRICAL - Two-stage surge protection (including separate surge protection built into
HO 8610 8630 8930 84 106 electronic driver) meets Location Category B. Available with universal voltage power supply
120-277VAC (UE - 50/60Hz input) and 347-480VAC.
LED Chips are frequently updated therefore values may increase. DRIVERS - Available in Super Saver (SS) and High Output (HO) drive currents. Components
are fully encased in potting material for moisture resistance. Driver complies with FCC 47
CFR part 15 RFI/EMI standard.
FINISH - Each fixture is finished with a polyester powder coat finishing process. Standard
finish is gloss white. Also available in textured black, bronze, metallic silver and graphite
(consult factory).
WARRANTY - LSI LED fixtures carry a limited 5-year warranty.
PHOTOMETRICS - Please visit our web site at www.lsi-industries.com for detailed
photometric data.
SHIPPING WEIGHT (IN CARTON) - 21 lbs. (9.5 kg.)
LISTINGS - UL listed to U.S. and Canadian safety standards. Suitable for damp locations.
This product, or selected versions of this product, meet the standards listed below. Please consult factory
for your specific requirements.
ARRA
Funding Compliant damp location
LED
Project Name Fixture Type © 2015
LSI INDUSTRIES INC.
156 Catalog #
LED AUGUSTA® (AUD, AUP) INTERIOR/AMBIENT
PRODUCT ORDERING INFORMATION
TYPICAL ORDER EXAMPLE: AUP S LED HO CW UE AC16 GWT
Prefix Light Drive Color Temp Input Voltage Refractor Finish Options
AUD Distribution Source Current CW - Cool White UE - Universal AC16 - 16" Clear Acrylic - Open GWT - Gloss White1 DIM - 0-10V Dimming
Direct Mount NW - Neutral White ACF16 - 16" Frosted Acrylic - Open BRZ - Bronze (from external signal)
AUP S - Symmetric LED SS - Super Saver WW - Warm White Electronic AC16FA - 16" Clear Acrylic with BLK - Black
Pendant (120-277V) GPT - Graphite
Mount HO - High Output Clear Acrylic Flat Lens MSV - Metallic Silver
ACF16FA - 16" Frosted Acrylic with
347-480
Universal Voltage Clear Acrylic Flat Lens
AC16SA - 16" Clear Acrylic with
(347-480V)
Clear Acrylic Sag Lens
ACF16SA - 16" Frosted Acrylic with
Clear Acrylic Sag Lens
1 - Standard finish. MOUNTING OPTIONS
DIMENSIONS
11"
5" DIRECT MOUNT HINGE PLATE AUD -Direct Mount AUP -Pendant Mount
(127mm) 5"
16” (127mm)
(406mm) 8 15/16"
17-1/2" (227mm)
(445mm)
16-1/2"
(419mm)
Pendant Mount – add 1" (25mm) height.
LED
Project Name Fixture Type © 2015
Catalog # LSI INDUSTRIES INC.
157
INTERIOR/AMBIENT LINIARC® HORIZON LED
DIMENSIONS US & Int'l. patents pending
PRODUCT HIGHLIGHTS
1.59" • LEDs - Use of closely-spaced medium power, high-brightness chips minimizes pixilation
7.35" and provides uniform luminance. Available in Neutral White (4000K), Warm White
FL - Frosted Acrylic Lens (3500K), and Soft White (3000K) color temperatures. CRI >=80. LM-80 reports available.
• Multiple Shielding Options - Louvers are available in semi-specular or white aluminum and
1.59" can be recessed (Standard) or protruding. A frosted acrylic lens is also available
• 4-Foot Incremental On-Grid Mounting - Fixtures are available in 4 and 8 foot lengths to
7.35" match handling capabilities on job site. 4-foot increments allow the fixtures to be mounted
RPL - Recessed Parabolic Louver on standard ceiling grids, no matter how long the row.
• Easy Cable Attachment - No locking plugs are needed with LiniArc fixtures. Hanging
1.59" connections are secured by the end cap or the adjoining fixture.
• Less Installation Labor - Fixtures come with the connecting hardware pre-installed.
7.35" Keyhole slots capture the joining screws and hold the fixture while the screws are
PL - Parabolic Louver tightened.
• Easy Two-Way Adjustment - Finger-action cable grippers on yoke mount allows simple
LIGHT OUTPUT - LED HRZ height and side-to-side adjustment, and lock in place with a set screw. This allows the
hangers to be pre-set to length on the ground prior to hanging the fixture.
HO - High Output SW - 30K WW - 35K NW - 40K Watts EXPECTED LIFE - Projected life of at least 60,000 hours. Contact factory for TM-21 detail.
50 HOUSING - Die Formed 20-gauge steel. Textured white polyester powder coat finish
PL - Parbolic Louver 3865 3984 4120 50 REFLECTOR - Die formed steel, high-reflectance white polyester powder coat finish.
50 LENS - Frosted Acrylic lens available
RPL - Recessed Parbolic Louver 3907 4028 4165 DRIVER - Solid-state Electronic. Universal voltage (120-277 VAC), 347 VAC. Dimming also
available.
FL - Frosted Acrylic lens 4220 4350 4499 PHOTOMETRICS - Please visit our web site at www.lsi-industries.com for detailed
photometric data.
LED Chips are frequently updated therefore values may increase. WARRANTY - Limited 5-year warranty.
LISTING - U.L. listed to U.S. and Canadian safety standards.
This product, or selected versions of this product, meet the standards listed below. Please consult factory
for your specific requirements.
ARRA
Funding Compliant
damp location
ACCESSORIES - See Accessories page for End Cap,
Hanging and Feed Options
LUMINAIRE ORDERING INFORMATION
HRZTYPICAL ORDER EXAMPLE: LED 8 PL HO SW S UE
Prefix Light Length Shielding Drive Current Color Circuiting Emer Circuiting Options Voltage
HRZ - Source 4 PL - Parabolic Louver HO - High Output Temperature S-Single
Horizon 8 (Standard) SW - Soft White Blank - None RAL - Custom Color (Specify - ex. RAL829) UE -
LED EF - Separate EC - Emergency Circuit Feed Universal
F - Fuse Electronic
WPL - White Parabolic Louver WW - Warm White Individual GMF - Slow-blow Fuse (120-277V)
Emergency Feed EM - Emergency Battery Pack
NW - Neutral White EH - Dedicated
Emergency DIM - 0-10V Dimming
RPL - Recessed Parabolic Thru-Wire Harness 347 - 347V
Louver
ES - Emergency Feed
Through Main Single
WRPL - White Recessed Circuit Harness
Parabolic Louver
LED FL - Frosted Acrylic lens
Project Name Fixture Type © 2015
LSI INDUSTRIES INC.
158 Catalog #
LED MICRO WALL WASH (MWW)
PRODUCT HIGHLIGHTS
• Recessed installation hides source while providing uniform illumination of vertical
surfaces / displays
• Narrow design for design specific applications
• Accent finish options for brightness control and aesthetics
• Very high efficiency
EXPECTED LIFE - Projected life of at least 60,000 hours. Contact factory for TM-21 detail.
LEDs - Use of closely-spaced medium-power, high-brightness chips minimizes pixelation and ACCENT/SIGN /WALL WASH
provides uniform lens luminance. Available in Cool White (5000K), Neutral White (4000K)
and Warm White (3500K) color temperatures. CRI >= 80 (CW > 70). LM-80 reports
available.
HOUSING - Housing, brackets and end sections are constructed from code gauge, die formed
steel. All metal parts are painted after fabrication following a treatment with a phosphate
rust inhibitor.
SHIELDING/LENS: High Performance 95% reflective white reflector is standard for precision 3-1/2”
directed wall wash use. Optional accent trim and kicker reflector trim finishes available for (89 mm)
many decorative applications.
ACCENT TRIM REFLEKCITCOKR 5/8”
MOUNTING: Designed for either grid or hard ceiling installations where ceiling access my DIFFUSER (15 mm)
be limited or completely restricted. All internal components are accessible from below the 5-3/4’
ceiling. (146 mm)
ELECTRICAL - Universal voltage (120-277 Vac) input, 50/60 Hz. Power factor > 0.9, THD < LIGHT OUTPUT - MWW LED HO - High Output Watts
20%, in-rush current < 15 Amps. SS - Super Saver WW NW CW SS HO
DRIVER - High-performance isolated driver features over-voltage, over-current and short- Description WW NW CW 2070 2410 2650 28 35
circuit (with auto-recovery) protection. Driver module is sealed to IP66 protection levels, 2’ 1760 2060 2200 3000 3200 3690 28 45
with a Class A sound rating. 0-10 volt dimming standard. 4’ 1970 2110 2370
FINISH - All metal parts painted after fabrication following treatment with phosphate rust LED Chips are frequently updated therefore values may increase.
inhibitor. Finish coating of housing reflecting surfaces is with high-reflectance (minimum
92%) polyester powder.
WARRANTY - Limited 5-year warranty.
PHOTOMETRICS - Please visit our web site at www.lsi-industries.com for detailed
photometric data.
LISTING - Listed to UL1598 and other U.S. and Canadian safety standards
This product, or selected versions of this product, meet the standards listed below. Please consult factory
for your specific requirements.
ARRA
Funding Compliant
dry location
ORDERING INFORMATION
TYPICAL ORDER EXAMPLE: MWW 4 LED HO NW WHT BLK UE CPL
Prefix Length Light Lumen Color Accent Trim Kick Reflector Line Voltage Options
MWW - 2 - 2’ Source Output Temperature Finish Finish UE - Universal EM - Emergency Battery Pack 1
LED Wall 4 - 4’ HO - High Output CW - Cool White CPL - CCEA Chicago Approved
Wash LED SS - Super Saver WW - Warm White BLK - Black BLK - Black Electronic SD50 - Step Dimming to 50%
NW - Neutral White WHT - White SLVR - Silver (120-277V)
WHT - White
1- EM ballast available only with a remote test switch (Accessories are field installed) Description Order Number LED
ACCESSORY ORDERING INFORMATION Order Number Flange Kit - 4 Foot FKMWW4
Description FKMWW2
Flange Kit - 2 Foot
Project Name Fixture Type © 2015
Catalog # LSI INDUSTRIES INC.
159
LED DUETTO® (DUT 201)
ACCENT/SIGN /WALL WASH DOE LIGHTING FACTS PRODUCT HIGHLIGHTS
Department of Energy has verified representative product test • Powerful accent lighting product provides the flexibility of track lighting and the power of
data and results in accordance with its Lighting Facts Program. a pair of adjustable LED lighting fixtures
Visit www.lightingfacts.com for specific catalog strings. • Adjustability of the lampholders plus the availability of a wide range of distributions
DIMENSIONS provide the ability to create just the right accent lighting
24” (610mm) LAMPS - Dimmable LED reflector lamps with high brightness LEDs. Two sizes: PAR30 and
PAR38. Available in a wide range of outputs and distributions (spot or flood). Contact
2-1/2” factory for details.
(65mm)
HOUSING COMPONENTS - Pre-painted die-formed 22 gauge CRS
9-1/2” DOOR - Die-formed cold rolled steel, polyester powder coated finish
(239mm) ADJUSTABLE LAMPHOLDERS - Gimbal ring constructed of 16 gauge CRS, white polyester
24” (610mm) powder coated finish. Rotation 0° - 358° , vertical 0° - 90°. Two locking knobs included.
YOKE - Cold rolled steel, polyester powder coated finish
SOCKET - Medium base, pulse rated for 4kv
MOUNTING - Supplied with T-bar clips
FINISH - All metal parts painted after fabrication following treatment with phosphate rust
inhibitor. Finish coating of housing reflecting surfaces is with high-reflectance (minimum
92%) polyester powder.
WARRANTY - Limited 5-year warranty
PHOTOMETRICS- Consult factory.
LISTING - UL listed to U.S. and Canadian safety standards. Suitable for damp location
This product, or selected versions of this product, meet the standards listed below. Please consult factory
for your specific requirements.
ARRA
Funding Compliant
dry location
8” 2-1/2”
(205mm) (65mm)
9-3/4”
(248mm)
ORDERING INFORMATION
DUT 201TYPICAL ORDER EXAMPLE: G 20W 38LED NW SP 120
Prefix Mounting Wattage Light Source Color Temperature Distribution Voltage
DUT 201 G - Grid 20 30LED - PAR 30 120 - 120 VAC
38LED - PAR 38 (blank) - Less Lamp (blank) - Less Lamp
LL - Less Lamp NW - Neutral White SP - Spot (15o)
FL - Flood (40o)
Contact factory for other currently available color
temperatures, distributions and wattages
LED
Project Name Fixture Type © 2015
LSI INDUSTRIES INC.
160 Catalog #
LED TRACK-IN-THE-BOX (111) DIMENSIONS ACCENT/SIGN /WALL WASH
APPLICATION - Track in the Box is a recessed multiple adjustable accent light with continu-
ous track for lateral adjustment.
LAMPS - Dimmable LED reflector lamps with high brightness LEDs. Two sizes: PAR30 and
PAR38, available in a wide range of outputs and distributions (spot or flood). Contact
factory for details.
HOUSING - Die formed cold rolled steel, white or black polyester powder coated finish.
TRACK - Extruded aluminum, single circuit with continuous copper conductors. Finish to be
white or black.
TRACK ADAPTER - Single circuit, injection molded plastic
INSULATION DETECTOR - A self resetting insulation detector is provided as standard.
YOKE - Die formed CRS, with 360° rotation and 55° angular adjustment.
SOCKET - Medium base.
PHOTOMETRICS - Please visit our web site at www.lsi-industries.com for detailed
photometric data.
LISTING - UL listed to U.S. and Canadian safety standards. IBEW Union made in the U.S.A.
B
This product, or selected versions of this product, meet the standards listed below. Please consult factory A
for your specific requirements.
ARRA
Funding Compliant
damp location
Gimbal Ring Dia.
Fixture W x L (A) Height (B) Par 38 Par 30
1x2 11-3/4” x 23-3/4” 9-1/2”
(298mm) x (603mm) (241mm) 5" 4"
1x4 11-3/4” x 47-3/4”
(298mm) x (1215mm)
ORDERING INFORMATION
TYPICAL ORDER EXAMPLE: 111 G 2 20W NW FL 38LED 3 120 BK
Prefix Mounting Length Wattage Color Temperature Distribution Source # of Lamps Input Voltage Options
111 G - Grid 2 - 2 Foot 120 - 120 Vac F -Fusing
20W - 20 watt (blank) - Less Lamp (blank) - Less Lamp 30LED - PAR30 2 BK - Black Housing
4 - 4 Foot LL - Less Lamp CW - Cool White SP - Spot (15o) 38LED - PAR38 3
NW - Neutral White FL - Flood (40o) 4
WW - Warm White 5
6
Contact factory for other currently available color
temperatures, distributions and wattages
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
Description Order Number
Flange Kit - 2 x 2 FK12
Flange Kit - 1 x 4 FK14
LED
Project Name Fixture Type © 2015
Catalog # LSI INDUSTRIES INC.
161
LED 6 INCH WET-LISTED DOWNLIGHT (PDL6K)
ACCENT/SIGN /WALL WASH module only shown COMPLETE KIT - PDL6K comes complete with high-efficiency LED modules, recessed
DOE LIGHTING FACTS housing and built-in trim.
Department of Energy has verified representative product test
data and results in accordance with its Lighting Facts Program. LEDs - Select high-brightness LEDs. Color temperature 4000K (NW, nominal). CRI = 90
Visit www.lightingfacts.com for specific catalog strings. (nominal)
DIMENSIONS LED MODULE ASSEMBLY - Durable plastic housing integrates LED module, white trim and
white baffle reflector. Frosted lens eliminates direct view of LEDs. Torsion springs safely
4-7/16” secure LED module in housing. Other trims available, consult factory.
(113mm)
ROUGH-IN HOUSING - Non-IC housing must be kept at least 3” away from insulation.
16-gauge galvanized steel housing includes frame with bar hangers with nails for wood
joist. Adjustable 14” to 25” for precise placement. Bar hangers include T-bar notch for
T-grid ceilings
DIMMING - PDL6K is dimmable to 10% with standard 120V electronic dimmers. Contact
factory for use with incandescent or magnetic low-voltage dimmers.
DELIVERED LUMENS - 900 (HO Output) or 700 (SS)
INPUT POWER - 13 watts (HO); 10 watts (SS)
EXPECTED LIFE - Minimum 50,000 hours.
WARRANTY - Limited 5-year warranty.
LISTING - Wet location. ETL listed to U.S. and Canadian safety standards.
PHOTOMETRICS - LM-79 and LM-80 reports, as well as application layout assistance are
available on request. Contact LSI Applications Group or [email protected].
This product, or selected versions of this product, meet the standards listed below. Please consult factory
for your specific requirements.
ARRA
Funding Compliant
Suitable for wet locations
7-3/8”
(187mm)
Module Only
7-1/2” 7-1/4”
6-3/8” 11”
Assembled in Housing
ORDERING INFORMATION
PDL6KTYPICAL ORDER EXAMPLE: LED HO NW 120
Prefix Light Source Lumen Output Color Temp Line Voltage
HO - High Output NW - Neutral White (4000K) 120 - 120 VAC
PDL6K - 6" Downlight LED SS - Super Saver
(Module & housing)
LED
Project Name Fixture Type © 2015
Catalog # LSI INDUSTRIES INC.
162
LED LINEAR HIGH OUTPUT LIGHT (LXW2) 0.405" (10 mm) OD Stem ACCENT/SIGN /WALL WASH
APPLICATIONS - Sign Lighting, Wall Washing, Accent Lighting; Interior. CATALOG# A 1 1/4"
PRODUCT HIGHLIGHTS LXW2 24 B (32 mm)
LXW2 36
• Long Lasting Sparkle - LED light beam contains no heat, and no UV, which means no LXW2 48 A B
degradation in color or quality of the product under display. LXW2 60 26.15" (664 mm) 26.8" (681 mm)
38.15" (969 mm) 38.8" (985 mm)
• Color Consistency - Exceptional color binning +/- 5%, no visible difference from LED to 50.15" (1274 mm) 50.8" (1290 mm)
LED 62.15" (1579 mm) 62.8" (1595 mm)
• Aimable - Fixture adjusts from 0° to 350° to put the light where you want it.
• “Green” Energy-Saving - Reduces gas emissions, slashes operating costs and
eliminates costly lamp disposal involving mercury waste.
• Dramatically Lower Maintenance Costs - Over 100,000-hour LED source extends life 3 to
5 times as compared to conventional fluorescent.
• Easy Installation, New or Retrofit - Mounts to either ceiling or wall.
• Separate Power Supply - Fixtures are connected easily to a universal voltage power
supply (ordered separately).
LEDS - Select high-brightness LEDs. Expected life: over 100,000 hours depending upon the
ambient temperature of the installation location. See LSI web site for specific guidance.
Available in neutral white (NW - 4000K, CRI > 85) and warm white (WW - 3500K CRI >
85). (All values nominal).
DRIVER - State-of-the-art driver technology designed specifically for the application is
integrated on-board, providing unsurpassed system efficiency. Complies with IEC and FCC
standards.
ELECTRICAL - Fixtures operate on intrinsically-safe 24 VDC, which means no risk to
customer or associates. Separate power supply operates on 120-277 VAC, 50/60 Hz. See
accessory page.
BEAM SPREAD- 120° symmetrical distribution.
LIGHT OUTPUT - 760 lumens per foot (NW) and 740 lumens per foot (WW), with an input
power of 7 watts per foot.
LENS- Supplied with protective clear plastic lens.
HOUSING- Available in black, white and metallic silver.
WIRING- Intrinsically-safe 24 VDC system makes it simple to connect the fixtures to
the power supply. Fixtures can be spaced apart as needed using appropriately sized
2-conductor to minimize voltage drop on long feeds from power.
OPERATING TEMPERATURE- -40°C to +50°C (-40°F to +122°F).
WARRANTY - LSI LED fixtures carry a limited 5-year warranty.
LISTING- Listed to U.S. and International safety standards. Suitable for damp locations.
This product, or selected versions of this product, meet the standards listed below. Please consult factory
for your specific requirements.
ARRA
Funding Compliant damp location
LUMINAIRE ORDERING INFORMATION
LXW2TYPICAL ORDER EXAMPLE: 36 LED WW 24 MSV 12STC
Prefix Length Light Source Color Temperature Input Voltage Finish Mandatory Mounting Options
24 - 24 VDC MSV - Silver 12STC - 12" Stem & Canopy
LXW2 24 - 24” LED WW - Warm White BKS - Black 24STC - 24" Stem & Canopy
36 - 36" NW- Neutral White WHS - White 48STC - 48" Stem & Canopy
48 - 48"
60 - 60" LED
Note: Power supply is required, please see LED Linear Accessories page.
Project Name Fixture Type © 2015
Catalog # LSI INDUSTRIES INC.
163
LED LINEAR HIGH OUTPUT LIGHT (LXC2)
LI N EAR DISPLAY & ACCENT 1-1/4” APPLICATIONS - Display Case Lighting, Cove Lighting, Accent Lighting, Shelf Lighting, and
(32mm) Under Cabinet Lighting; Interior.
15/16” 1-3/16” PRODUCT HIGHLIGHTS
(24mm) (30mm) • Long Lasting Sparkle - LED light beam contains no heat, and no UV, which means no
degradation in color or quality of the product under display.
B C • Color Consistency - Exceptional color binning +/- 5%, no visible difference from LED to
A LED
• Aimable - Fixture adjusts from 0° to 90° to put the light where you want it.
CATALOG# A B C • “Green” Energy-Saving - Reduces gas emissions, slashes operating costs and
LXC2 12 12” (305mm) 12.75“ (324mm) 13.125” (333mm) eliminates costly lamp disposal involving mercury waste.
LXC2 18 18” (457mm) 18.75“ (476mm) 19.125” (486mm)
LXC2 24 21” (533mm) 21.75“ (552mm) 22.15” (562mm) • Dramatically Lower Maintenance Costs - Over 100,000-hour LED source extends life 3 to
LXC2 30 27” (686mm) 27.75“ (705mm) 28.125” (714mm) 5 times as compared to conventional fluorescent.
LXC2 36 33” (838mm) 33.75“ (857mm) 34.125” (867mm)
LXC2 42 39” (991mm) 39.75“ (1089mm) 40.125” (1019mm) • Easy Installation, New or Retrofit - Mounts with available brackets or customer adhesive.
LXC2 46 45” (1143mm) 45.75“ (1162mm) 46.125” (1172mm) Lightweight (< 0.5 lb. per foot).
LXC2 48 48” (1219mm) 48.75“ (1238mm) 49.125” (1247mm)
LXC2 96 96” (2438mm) 96.75” (2457mm) 97.125” (2467mm) • Separate Power Supply - Fixtures are connected easily to a universal voltage power
supply (ordered separately).
LEDS - Select high-brightness LEDs. Expected life: over 100,000 hours depending upon the
ambient temperature of the installation location. See LSI web site for specific guidance.
Available in cool white (CW - 5000K, CRI > 70), neutral white (NW - 4000K, CRI > 85) and
warm white (WW - 3500K CRI > 85). (All values nominal).
DRIVER - State-of-the-art driver technology designed specifically for the application is
integrated on-board, providing unsurpassed system efficiency. Complies with IEC and FCC
standards.
ELECTRICAL - Fixtures operate on intrinsically-safe 24 VDC, which means no risk to
customer or associates. Separate power supply operates on 120-277 VAC, 50/60 Hz. See
accessory page.
BEAM SPREAD- 120° symmetrical distribution.
LIGHT OUTPUT - 875 lumens per foot (CW), 800 lumens per foot (NW), and 780 lumens
per foot (WW), with an input power of 7 watts per foot.
LENS- Supplied with protective clear plastic lens.
HOUSING- Anodized aluminum extrusion
WIRING- Integrated connection system makes it simple to create continuous lines of LED
lighting. The fixtures can be connected directly together or spaced apart as needed, using
the optional jumper cables. Use appropriately sized 2-conductor to minimize voltage drop
on long feeds from power.
OPERATING TEMPERATURE- -40°C to +50°C (-40°F to +122°F).
WARRANTY - LSI LED fixtures carry a limited 5-year warranty.
LISTING- Listed to U.S. and International safety standards. Suitable for damp locations.
This product, or selected versions of this product, meet the standards listed below. Please consult factory
for your specific requirements.
LUMINAIRE ORDERING INFORMATION ARRA
LXC2 36TYPICAL ORDER EXAMPLE: Funding Compliant damp location
LED CW 24
Prefix Length Light Source Color Temperature Input Voltage
LXC2 LED CW - Cool White 24 - 24 VDC
12 - 12” 30 - 30” 46 - 46” NW - Neutral White
18 - 18” 36 - 36” 48 - 48” WW - Warm White
24 - 24” 42 - 42” 96 - 96”
Note: Power supply is required, please see LED Linear Accessories page.
LED
Project Name Fixture Type © 2015
LSI INDUSTRIES INC.
164 Catalog #
LED LINEAR DISPLAY LIGHT (LDL3)
APPLICATIONS - Display Case Lighting, Cove Lighting, Accent Lighting, Shelf Lighting, and 3/4” 13/16” LI N EAR DISPLAY & ACCENT
Under Cabinet Lighting; Interior. (19mm) (20mm)
PRODUCT HIGHLIGHTS (156/m8”m)
• Long Lasting Sparkle - LED light beam contains no heat, and no UV, which means no
degradation in color or quality of the product under display. C
• Color Consistency - Exceptional color binning +/- 5%, no visible difference from LED to B
LED A
• Aimable - Fixture adjusts from 0° to 90° to put the light where you want it.
• “Green” Energy-Saving - Reduces gas emissions, slashes operating costs and CATALOG# A B C
eliminates costly lamp disposal involving mercury waste. LDL3 12 11” (279mm) 11.75” (298mm) 12.125” (308mm)
LDL3 18 17” (432mm) 17.75” (451mm) 18.125” (460mm)
• Dramatically Lower Maintenance Costs - Over 100,000-hour LED source extends life 3 to LDL3 24 22.5” (572mm) 23.25” (591mm) 23.625” (600mm)
5 times as compared to conventional fluorescent. LDL3 30 28.5” (724mm) 29.25” (743mm) 29.625” (752mm)
LDL3 36 33” (838mm) 33.75” (857mm) 34.125” (867mm)
• Easy Installation, New or Retrofit - Mounts with available brackets or customer adhesive. LDL3 42 39” (991mm) 39.75” (1089mm) 40.125” (1019mm)
Lightweight (< 0.5 lb. per foot). LDL3 48 45” (1219mm) 45.75” (1162mm) 46.125” (1172mm)
• Separate Power Supply - Fixtures are connected easily to a universal voltage power
supply (ordered separately).
LEDS - Select high-brightness LEDs. Expected life: over 100,000 hours depending upon the
ambient temperature of the installation location. See LSI web site for specific guidance.
Available in cool white (CW - 5000K, CRI > 70), neutral white (NW - 4000K, CRI > 85) and
warm white (WW - 3500K CRI > 85). (All values nominal).
DRIVER - State-of-the-art driver technology designed specifically for the application is
integrated on-board, providing unsurpassed system efficiency. Complies with IEC and FCC
standards.
ELECTRICAL - Fixtures operate on intrinsically-safe 24 VDC, which means no risk to
customer or associates. Separate power supply operates on 120-277 VAC, 50/60 Hz. See
accessory page.
BEAM SPREAD- 120° symmetrical distribution.
LIGHT OUTPUT - 470 lumens per foot (CW), 430 lumens per foot (NW), 420 lumens per
foot (WW), with an input power of less than 5 watts per foot.
LENS- Supplied with protective clear plastic lens. Optional diffusing lens available.
HOUSING- Anodized aluminum extrusion
WIRING- Integrated connection system makes it simple to create continuous lines of LED
lighting. The fixtures can be connected directly together or spaced apart as needed, using
the optional jumper cables. Use appropriately sized 2-conductor to minimize voltage drop
on long feeds from power.
OPERATING TEMPERATURE- -40°C to +50°C (-40°F to +122°F).
WARRANTY - LSI LED fixtures carry a limited 5-year warranty.
LISTING- Listed to U.S. and International safety standards. Suitable for dry locations.
This product, or selected versions of this product, meet the standards listed below. Please consult factory
for your specific requirements.
ARRA
Funding Compliant
damp location
LUMINAIRE ORDERING INFORMATION LED CW 24
LDL3 36TYPICAL ORDER EXAMPLE:
Prefix 12 - 12” Length Light Source Color Temperature Input Voltage Options
LDL3 18 - 18” 36 - 36” LED CW - Cool White 24 - 24 VDC DL - Diffusing Lens
24 - 24” 42 - 42” NW - Neutral White
30 - 30” 48 - 48” WW - Warm White
Note: Power supply is required, please see LED Linear Accessories page.
LED
Project Name Fixture Type © 2015
Catalog # LSI INDUSTRIES INC.
165
LED LINEAR STRIP LIGHT (LSL2)
LI N EAR DISPLAY & ACCENT 1-1/8” APPLICATIONS - Shelf Lighting, Cove Lighting, Accent Lighting, Under Cabinet Lighting and
(27mm) Handrail Lighting; Interior or Exterior.
1/8” 1/2” PRODUCT HIGHLIGHTS
(3mm) (13mm) • Up-Close Illumination - Closely spaced LEDs uniformly illuminate items positioned close
7/8” to the strip, allowing shelves to be spaced closer together.
(22mm) R 3/8” • Aimable - Fixture adjusts from 0° to +/- 90° to put the light where you want it.
(10mm) • “Green” Energy-Saving - Reduces greenhouse gas emissions, and eliminates costly
lamp disposal involving mercury waste.
C • Long Lasting Sparkle - LED light beam contains no heat, and no UV, which means
B degradation in color or quality of the product under display is minimized.
• Dramatically Lower Maintenance Costs - 60,000+ hour LED source extends life 3 to 5
A times as compared to conventional fluorescent.
• Easy Installation, New or Retrofit - Mounts with available brackets or customer adhesive.
Catalog# A B C Lightweight (< 0.25 lb. per foot).
LSL2 12 11.125 (282mm) 11.75 (295mm) 12.188 (305 mm) • Separate Power Supply - Fixtures are easily connected to a universal voltage power
LSL2 18 17.125 (434mm) 17.75 (447 mm) 18.188 (457 mm) supply (ordered separately).
LSL2 24 23.125 (587mm) 23.75 (600 mm) 24.188 (610 mm)
LSL2 30 29.125 (739 mm) 29.75 (752 mm) 30.188 (762 mm) LEDS - Select high-brightness LEDs. Expected life: minimum 60,000 hours to 100,000 hours
LSL2 36 35.125 (892 mm) 35.75 (904 mm) 36.188 (914 mm) depending upon the ambient temperature of the installation location. See LSI web site for
LSL2 48 47.125 (1196 mm) 47.75 (1209 mm) 48.188 (1219 mm) specific guidance. Available in 3500K, 4000K and 5000K color temperature (nominal).
DRIVER - State-of-the-art driver technology designed specifically for the application is
integrated on-board, providing unsurpassed system efficiency. Complies with IEC and FCC
standards.
ELECTRICAL - Fixtures operate on intrinsically-safe 24 VDC, which means no risk to
customers or associates. Separate power supplies operate on 120-277 VAC, 50/60 Hz.
See accessory page.
BEAM SPREAD - 120° symmetrical distribution.
LIGHT OUTPUT - Input power is 3 watts per foot. Cool White (CW) lumens per foot is 180.
Neutral White (NW) and Warm White (WW) lumens per foot is 150.
LENS - Optional clear lens available.
HOUSINGS - Anodized aluminum extrusion
WIRING - Feed wires on both ends make it simple to create continuous lines of LED lighting.
Fixtures can be connected either directly together or spaced up to 4' apart with provided
feed wires. Use appropriately sized 2-conductor cable (not supplied) to minimize voltage
drop on long feeds for power.
OPERATING TEMPERATURE - -40°C to +50°C (-40°F to +122°F).
WARRANTY - LSI LED fixtures carry a limited 5-year warranty.
LISTING - Listed to U.S. and Canadian safety standards for wet locations.
This product, or selected versions of this product, meet the standards listed below. Please consult factory
for your specific requirements.
damp location
LUMINAIRE ORDERING INFORMATION LED CW 24
LSL2 48TYPICAL ORDER EXAMPLE:
Prefix Length Light Source Color Temperature Input Voltage Options
LSL2 LED CW - Cool 24 - 24 VDC CL - Clear Lens
12 - 12” 30 - 30” NW - Neutral
18 - 18” 36 - 36” WW - Warm White
24 - 24” 48 - 48”
Note: Power supply is required, please see LED Linear Accessories page.
LED
Project Name Fixture Type © 2015
LSI INDUSTRIES INC.
166 Catalog #
LED LINEAR ACCESSORIES
ACCESSORY ORDERING INFORMATION (Accessories are field installed and damp location listed)
Description Max Output1 Order Number LXC2/LDL3 only Order Number
Description
Non-Encased 100 Watt Power Supply with 120-277 VAC; 50/60 Hz Input; 24 100 W PS 100 LED UE HRNSS 6” Jumper Cable with Male/Female connectors 35148301
VDC Output (Fig. 1) HRNSS 1ft Jumper Cable with Male/Female connectors 35148302
Encased 40 Watt Power Supply with 120 VAC; 50/60 Hz Input; 24 VDC 40 W PSE 40 LED 120 HRNSS 3ft Jumper Cable with Male/Female connectors 35148304
Output. (Fig. 2) HRNSS 5ft Jumper Cable with Male/Female connectors 35148305
Encased 100 Watt Power Supply with 120-277 VAC; 50/60 Hz Input; 24 VDC 100 W PSE 100 LED UE HRNSS 10 ft Jumper Cable with Male/Female connectors 35148303
Output. UL listed (Fig. 3)
Encased 100 Watt Power Supply with 120-277 VAC; 50/60 Hz Input; 24 VDC 100 W EUR PSE 100 LED UE LXW2 only Order Number
Output. CE listed (Fig. 3) 200 W 354875
Encased 200 Watt Power Supply with 120-277 VAC; 50/60 Hz Input; 24 VDC (100x2) RB3 200 LED UE Description
Output. UL listed (Fig. 4)2 300 W HRNSS 10ft Jumper Cable for LXW2
Encased 300 Watt Power Supply with 120-277 VAC; 50/60 Hz Input; 24 VDC (100x3) RB3 300 LED UE
Output. UL listed (Fig. 5)3 400 W IMPORTANT POWER SUPPLY NOTE: LI N EAR DISPLAY & ACCENT
Encased 400 Watt Power Supply with 120-277 VAC; 50/60 Hz Input; 24 VDC (100x4) RB3 400 LED UE The power supplies are designed to work with the quick connects supplied with
Output. UL listed (Fig. 5)4 the LXC2/LDL3 series or they can be hard wired with the LSL2 and LXW2.
Thermally Protected, Recessed Rated Encased 40 Watt Power Supply with 40 W RPSE 40 LED 120 Depending on the mounting requirements, you may need additional cable length
120 VAC; 50/60 Hz Input; 24 VDC Output. UL listed (Fig. 6) between fixtures/power supplies. Optional length harnesses (HRNSS) shown
Thermally Protected, Recessed Rated Encased 100 Watt Power Supply with 100 W RPSE 100 LED 120 above are designed for use with the LXC2/LDL3 series to connect fixtures to the
120 VAC; 50/60 Hz Input; 24 VDC Output. UL listed (Fig. 7) enclosed power supplies. If additional cable is needed with the LSL2 and
Thermally Protected, Recessed Rated Encased 100 Watt Power Supply with 100 W RPSE 100 LED 208 LXLW2 it will be customer supplied.
208 VAC; 50/60 Hz Input; 24 VDC Output. UL listed (Fig. 7)
Thermally Protected, Recessed Rated Encased 100 Watt Power Supply with 100 W RPSE 100 LED 240 FOOTNOTES:
240 VAC; 50/60 Hz Input; 24 VDC Output. UL listed (Fig. 7) 1- Damage to the power supply and unpredictable lighting can result from exceeding max
Thermally Protected, Recessed Rated Encased 100 Watt Power Supply with 100 W RPSE 100 LED 277
277 VAC; 50/60 Hz Input; 24 VDC Output. UL listed (Fig. 7) output. It is good design practice to limit loading to 80% of maximum.
2- Operates (2) 100 Watt Class II power supplies
3- Operates (3) 100 Watt Class II power supplies
4- Operates (4) 100 Watt Class II power supplies
FIG. 1 - PS100 (POWER SUPPLY ONLY) FIG. 2 - PSE40 8-7/8”
9-1/2” 6” (226 mm)
(241 mm) (152 mm) 2-13/16”
1-3/16” (140-51/m8”m) (71 mm)
(30 mm) 4-1/8”
3” (105 mm)
1-3/4” 8-15/16” (76 mm)
(44 mm) (228 mm)
8-5/16”
(226 mm)
FIG. 3 - PSE100 FIG. 4 - RB3 200 FIG. 5 - RB3 300/400
13-7/8” 12 13/16” 23-5/16”
(353 mm) (326 mm) (592 mm)
(27191m” m) 12 1/8” 22-5/8”
(308 mm) (575 mm)
4” 3” 11” 21-1/2”
(102 mm) (76 mm) (279 mm) (546 mm)
4-1/16”
(102 mm) 2-13/16” 8-1/4” 8-1/4”
(71 mm) (210 mm) (210 mm)
3-1/8” (80 mm) 3-13/16” 3-13/16”
(96 mm) (96 mm)
4-1/8”
(105 mm) FIG. 6 - RPSE40 4-1/16” FIG. 7 - RPSE100 2-13/16”
8-7/8” (102 mm) 13-7/8” (71 mm)
(76 3m”m) (226 mm) (353 mm)
(76 3m”m)
6” 11”
(152 mm) (279 mm)
2-13/16”
(71 mm)
4-1/8” 4-1/16” ARRA
(105 mm) (102 mm)
Funding Compliant
LED
Project Name Fixture Type © 2015
Catalog # LSI INDUSTRIES INC.
167
LED LINEAR ACCESSORIES
LXC2/LDL3 - LED LINEAR DISPLAY LIGHT TYPICAL WIRING 6” OR 12” DIRECTLY
HRNSS CABLE CONNECTED
To connect the PSE or RB3 to the fixture, use the HRNSS 10 ft. Jumper Cable
LXC2 / LDL3
Can be connected together 3 ways:
1- Directly using supplied quick connect plugs 6” OR 12” EXAMPLE CASE CONFIGURATION
HRNSS CABLE POWER
2- HRNSS 6” jumper cable - provides up to 10” between fixtures 10’ HRNSS CABLE SUPPLY
3- HRNSS 10’ jumper cable - provides up to 124” between fixtures
LI N EAR DISPLAY & ACCENT LSL2 - LED LINEAR STRIP LIGHT TYPICAL WIRING
L Power In L Power Out
NOTE: Use gel filled wire nuts when
LXW2 - LED LINEAR SIGN/WALL WASHER TYPICAL WIRING
connecting fixtures outdoors.
POWER SUPPLY 10' HRNSS CABLE
P/N 354875
LED ARRA
Project Name Fixture Type Funding Compliant
© 2015
168 Catalog #
LSI INDUSTRIES INC.
LED THIS PAGE LEFT INTENTIONALLY BLANK
169
LED LINEAR HIGH BAY - PMX
INDUSTRIAL PRODUCT HIGHLIGHTS
• Long life, high brightness LEDs virtually eliminate maintenance.
DIMENSIONS • Unit may be pendant, chain or surface mounted
• Hub mounting option allows single-point mount for direct replacement of HID High
13-3/8” Bays
(339mm) • Minimum fixture weight - less load on building structure
• Available in 4 ft length.
11”
(280mm) EXPECTED LIFE - Projected life of at least 60,000 hours. Contact factory for TM-21 detail.
LEDS - Use of closely-spaced medium-power, high-brightness chips minimizes pixelation
4-3/4” 4”
(121mm) (100mm) and provides uniform lens luminance. Available in Cool White (5000K), Neutral White
(4000K) and Warm White (3500K) color temperatures. CRI >= 80 (CW > 70). LM-80
15-11/16” x 48” reports available.
(398mm x 1219mm) CONSTRUCTION - Fixture housing, end sections, and lampholders of code gauge die
formed steel, standard reflector of code gauge die formed aluminum, white finish.
LIGHT OUTPUT - PMX ELECTRICAL - Universal voltage (120-277 Vac) input, 50/60 Hz. Power factor > 0.9, THD <
20%, in-rush current < 15 Amps.
Lumens (Nominal) FINISH - All metal parts painted after fabrication following treatment with phosphate rust
inhibitor. Finish coating of housing reflecting surfaces is with white, high reflectance
CW NW WW W (minimum 92%) polyester powder.
HO 11,640 9,950 9,570 86 DRIVER – High-performance isolated driver features over-voltage, over-current and short-
VHO 15,190 12,970 12,480 111 circuit (with auto-recovery) protection. Driver module is sealed to IP66 protection levels,
with a Class A sound rating. 0-10V dimming standard.
LENS - Available with clear (PMX-C) or pattern 12 (PMX-A) prismed lens.
OPERATING TEMPERATURE – -30°C to +60°C (-22°F to +140°F)
WARRANTY - Limited 5-year warranty.
PHOTOMETRICS - Please visit our web site at www.lsi-industries.com for detailed
photometric data.
LISTING - Listed to UL1598 and UL 8750. Suitable for damp locations. For a list of the
specific products in this series that are DLC listed, please consult the LED Lighting section
of our website or the Design Lights website at www.designlights.org.
LED Chips are frequently updated therefore values may increase.
This product, or selected versions of this product, meet the standards listed below. Please consult factory
for your specific requirements.
ARRA damp location
Funding Compliant
LUMINAIRE ORDERING INFORMATION VHO NW UE PMX-A
PMX LEDTYPICAL ORDER EXAMPLE:
Prefix Light Source Drive Current Color Temperature Input Voltage Options
PMX LED HO - High Output CW - Cool White 347 - 347V EM - Emergency Pack
VHO - Very High Output NW - Neutral White OCS - Occupancy Sensor (specify type)
WW - Warm White 480 - 480V HUB - Hub Mounting Hardware 3/4” NPS
SD50 - Step Dimming to 50%
UE - Universal Input Voltage PMX-A Prismatic Acrylic Lens Door Assembly*
(120-277V) PMX-C Clear Acrylic Lens Door Assembly*
*Can also be ordered as an accessory
LED ACCESSORY ORDERING INFORMATION (Accessories are field installed)
Description Order Number
Wire Guard
Wire Guard Door WGPMX
V hook Chain Set WGDPMX
Prismatic Acrylic Lens Door Assembly CHS IMX
Clear Acrylic Lens Door Assembly
PMX-A
Project Name PMX-C
Catalog # Fixture Type © 2015
LSI INDUSTRIES INC.
170
LED NARROW AISLE HIGH BAY - IMXNB
PRODUCT HIGHLIGHTS INDUSTRIAL
• High efficiency LEDs for significant energy savings over HID high bays.
• Deep reflectors yield narrow concentrated pattern.
• Unit may be pendant, chain, aircraft
• Monopoint mounting option (MMS) allows single-point mount for direct replacement of
HID High Bays.
• Shallow fixture depth
• Minimum fixture weight - less load on building structure
EXPECTED LIFE - Projected life of at least 60,000 hours. Contact factory for TM-21 detail.
LEDS - Use of closely-spaced medium-power, high-brightness chips minimizes pixelation DIMENSIONS
and provides uniform lens luminance. Available in Cool White (5000K), Neutral White
(4000K) and Warm White (3500K) color temperatures. CRI >= 80 (CW>70). LM-80 reports
available.
CONSTRUCTION - Fixture housing, end sections, and lampholders of code gauge die formed 3-7/8”
steel, standard reflector of code gauge die formed aluminum, white finish. (98mm)
ELECTRICAL - Universal voltage (120-277 Vac) input, 50/60 Hz. Power factor > 0.9, THD 23-3/8” x 46-1/2”
< 20%, in-rush current < 15 Amps. (592mm x 1180mm)
OPERATING TEMPERATURE - -40°C - +40°C (-40°F - 104°F).
FINISH - All metal parts painted after fabrication following treatment with phosphate rust
inhibitor. Finish coating of housing reflecting surfaces is with white, high reflectance
(minimum 92%) polyester powder.
DRIVER – High-performance isolated driver features over-voltage, over-current and short-
circuit (with auto-recovery) protection. Driver module is sealed to IP66 protection levels,
with a Class A sound rating. 0-10V dimming standard.
PHOTOMETRICS - Please visit our web site at www.lsi-industries.com for detailed
photometric data.
WARRANTY - Limited 5-year warranty.
LISTING - Listed to UL1598 and other U.S. and Canadian safety standards. LIGHT OUTPUT - IMXNB
This product, or selected versions of this product, meet the standards listed
below. Please consult factory for your specific requirements. Lumens (Nominal)
CW NW WW W
HO 11,620 9910 9470 88
LED Chips are frequently updated therefore values may increase.
ARRA
Funding Compliant
LUMINAIRE ORDERING INFORMATION HO NW UE EM
IMXNB LEDTYPICAL ORDER EXAMPLE: Color Temperature
CW - Cool White
Prefix Light Source Drive Current NW - Neutral White Input Voltage Options
IMXNB LED HO - High Output WW - Warm White 347 - 347V EM - Emergency Pack
OCS - Occupancy Sensor (specify type)
UE - Universal Input Voltage HUB - Hub Mounting Hardware 3/4” NPS
(120-277V) CHS IMX - V hook Chain Set
MMS - Monopoint Mounting System
SD50 - Step Dimming to 50%
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
Description Order Number
WGXNB
Wire Guard PAXNB
Clear Acrylic Lens Door Assembly
LED
Project Name Fixture Type © 2015
Catalog # LSI INDUSTRIES INC.
171
LED LINEAR HIGH BAY (XLHB)
INDUSTRIAL US & Int'l. patents pending
DIMENSIONS 14” INTEGRAL MOTION SENSOR (IMS) - Choice of 2 optional internal passive infrared motion
(356mm) sensor activated switching of luminaire light levels, either 0 or 30% of power. High level light is
TOP VIEW 2, 4 LAMP activated when activity is sensed in target zone. High light level is increased to full bright in 1-2
22.6” seconds upon detection. Low light level (0 or 30% of power) is activated when target zone is
TOP VIEW 6, 8 LAMP (575mm) absent of motion activity for ~ 2 minutes. Upon inactivity, light level is gradually ramped down
(10-15 sec.) to low level to allow eyes time to adjust.
SIDE VIEW
47.6” (1208mm) DIMMING (DIM) - Optional 0-10 volt dimming enabled, with controls by others.
BI-LEVEL SWITCHING (BLS) - Optional bi-level switching responds to external line voltage
END VIEW
signal from separate controller or sensor (by others), with low light level decreased to
4.1” 30% maximum drive current.
(103mm) EXPECTED LIFE - Minimum 60,000 to 100,000 hours depending upon the ambient temperature of
the installation location.
LIGHT OUTPUT - Linear High Bay Clear Lens* LEDS - Features an array of closely spaced medium power LED chips; Cool White (5000K) color
temperature, 70 CRI (nominal) or Neutral White (4000K) color temperature, 80 CRI (nominal).
Standard Lumens Watts LPW HOUSING - Housing is die-formed steel. Designed vertical fins serve as heat sink and resist
Distribution SDFL S accumulation of dust and debris. Access panel provides single-screw access to driver and
AL SDFL S AL SDFL S AL wiring connections.
OPTICAL UNIT - Featuring a slim 4” profile, housing is die-formed steel with a clear polycarbonate
XLHB - 2 - SS 8,012 9,232 9,213 76 76 76 105 121 121 lens. An optional diffused polycarbonate lens is available.
OPTICS / DISTRIBUTION - Choice of 3 high performance distributions; Symmetric (S), Symmetric
XLHB - 2 - HO 10,929 12,557 12,581 109 109 109 100 115 116 with Diffused Lens (SDFL) or Aisle Lighter (AL).
MOUNTING - Mounting options include Hook Cable Hangers (HCH10), Pendant Mount (PM), or
Cool White XLHB - 4 - SS 15,277 17,953 18,337 145 143 145 106 126 127 Single Hub/Cable Mount (SHC).
DRIVER - State-of-the-art driver technology delivers superior energy efficiency and optimum
XLHB - 4 - HO 19,951 23,326 23,931 200 200 200 100 117 120 light output. LSI driver components are fully encased in potting for IP65 moisture resistance.
Complies with IEC and FCC standards. Optional 0-10V dimming driver available, with controls
XLHB - 6 - SS 24,747 27,860 27,834 217 217 219 114 128 127 by others.
ELECTRICAL - Universal voltage power supply, 120-277 VAC, 50/60 HZ input. LSI drivers feature
XLHB - 6 - HO 33,979 38,228 38,132 320 320 320 106 119 119 two-stage surge protection (including separate surge protection built into electronic driver)
meets IEEE C62.41.2-2002, Scenario 1, Location Category C, 10KV.
XLHB - 8 - SS 32,915 37,179 36,678 286 288 286 115 129 128 OPERATING TEMPERATURE - -40°C to 50°C (-40°F to +122°F) SS max = 55°C, HO max = 40°C
FINISH - Fixtures are finished with LSI’s DuraGrip® polyester powder coat finishing process.
XLHB - 8 - HO 43,110 48,561 48,204 400 400 400 108 121 120 DuraGrip withstands extreme weather changes without cracking or peeling. Standard color is
white.
XLHB - 2 - SS 7,509 8,837 8,853 77 75 75 98 118 118 DRIVE CURRENT - Choice of Super Saver (SS) or High Output (HO).
WARRANTY - Limited 5-year warranty.
PHOTOMETRICS - Please visit our web site at www.lsi-industries.com for detailed
photometric data.
SHIPPING WEIGHT - 2/4 Row = 23 lbs. 6/8 Row = 34 lbs.
LISTING - UL listed to UL 1598, UL8750 and other U.S. and International safety standards.
Suitable for damp locations. For a list of the specific products in this series that are DLC
listed, please consult the LED Lighting section of our website or the Design Lights website
at www.designlights.org.
XLHB - 2 - HO 10,262 12,119 12,133 110 110 110 93 110 110 This product, or selected versions of this product, meet the standards listed below. Please consult factory
for your specific requirements.
Neutral White XLHB - 4 - SS 14,426 16,951 16,836 141 141 143 102 120 118
XLHB - 4 - HO 19,167 21,970 22,037 197 197 200 97 111 110
XLHB - 6 - SS 23,222 26,362 26,124 220 221 221 106 119 118 ARRA
XLHB - 6 - HO 31,812 36,169 35,852 321 322 322 99 112 111 Funding Compliant damp location
XLHB - 8 - SS 30,715 34,903 34,457 286 286 289 107 122 119
XLHB - 8 - HO 40,113 45,753 45,079 399 399 400 101 115 113
LED * Note: SDFL - Symmetric Diffused Lens, S - Symmetric Clear Lens, AL - Aisle Lighter
Diffused Lens Only
LED Chips are frequently updated therefore values may increase.
Project Name Fixture Type © 2015
LSI INDUSTRIES INC.
172 Catalog #
LED LINEAR HIGH BAY (XLHB)
LUMINAIRE ORDERING INFORMATION S LED SS CW UE E6C L715P INDUSTRIAL
XLHB 4TYPICAL ORDER EXAMPLE:
Prefix Rows1 Distribution Light Drive Color Input Voltage Wiring Options
Source Current Temperature Location
XLHB - Linear High Bay 2 S - Type S LED SS - Super Saver3 CW - Cool White UE - Universal CLDS - Center Leads EM - Emergency Battery Back Up
10 - 20k Lumens 4 Symmetric HO - High Output3 NW -Neutral White Voltage ELDS - End Leads IMS0 - Integral Motion Sensor (0% Power)
E6C - End 6' Cord IMS30 - Integral Motion Sensor (30% Power)
(120-277v)
DIM - 0-10v Dimming4 (Controls by Others)
XLHB - Linear High Bay 6 AL - Aisle Lighter2 347/480 - 347v BLS - Bi-Level Switching
30 -40k Lumens 8 SDFL - Type S or 480v
Symmetric Wiring Plug Options8
Diffused Lens 515P - 5-15P plug only (120 Volt)
L515P - 5-15PTwistlock Plug only (125 Volt)
L615P - 6-15PTwistlock Plug only (250 Volt)
L715P - 7-15P Twistlock Plug only (277 Volt)
L820P - 8-20P Twistlock Plug only (480 Volt)
L2420P - 24-20P Twistlock Plug only (347 Volt)
*See High Bay accessories page for more options.
Accessories
PM - Pendant Mount6 - 572484
SHC - Single Hub / Chain Mount7 - 572488
XLHB -2/4 WG - Wire Guard - TBD
XLHB - 6/8 WG - Wire Guard - TBD
HCH10 - 10' Hook Cable Hanger (Pair) - 460149
TMK - Tandem Mounting Kit8 - 574554
Notes:
1 - 2 rows ~ 10k lms; 4 rows ~ 20k lms; 6 rows ~ 30k lms; 8 rows ~ 40k lms. See lumen output chart for specific outputs.
2 - Aisle Lighter not available in diffused lens.
3 - Maximum operating temperature may be limited by drive current selections & mounting method. (HO = 40° C, SS = 55° C).
4 - 0-10V Dimming supplies extending leads outside of fixture. Controls by others.
5 - Standard fixture wiring will extend leads outside of fixture. If customer wants wiring by factory, a selection of desired options must be specified from available electrical items. Otherwise, customer may use
electrical accessories "by others".
6 - Pendant mount option supplies wiring box with 3/4" threaded hub for housing connections and attaching stem. Stem must be ordered as separate line item accessory.
7 - Single Hub Chain mounting supplies center hub with chains extended to each corner of fixture for ease of leveling.
8 - Tandem Mounting Kit consists of 2 end panels; 6' jumper cord, 10' cord, wire connectors, pair of HCH10 Cables & hardware. TMK not compatible with 2 row or 4 row fixtures.
LED
Project Name Fixture Type © 2015
Catalog # LSI INDUSTRIES INC.
173
LED LINEAR HIGH BAY (XLHB) WITH UPLIGHT
INDUSTRIAL US & Int'l. patents pending
INTEGRAL MOTION SENSOR (IMS) - Choice of 2 optional internal passive infrared motion
sensor activated switching of luminaire light levels, either 0 or 30% of power. High level light is
activated when activity is sensed in target zone. High light level is increased to full bright in 1-2
seconds upon detection. Low light level (0 or 30% of power) is activated when target zone is
absent of motion activity for ~ 2 minutes. Upon inactivity, light level is gradually ramped down
(10-15 sec.) to low level to allow eyes time to adjust.
DIMMING (DIM) - Optional 0-10 volt dimming enabled, with controls by others.
BI-LEVEL SWITCHING (BLS) - Optional bi-level switching responds to external line voltage
signal from separate controller or sensor (by others), with low light level decreased to
30% maximum drive current.
EXPECTED LIFE - Minimum 60,000 to 100,000 hours depending upon the ambient temperature of
the installation location.
DIMENSIONS LEDS - Features an array of closely spaced medium power LED chips; Cool White (5000K) color
temperature, 70 CRI (nominal) or Neutral White (4000K) color temperature, 80 CRI (nominal).
TOP VIEW 2, 4 LAMP
HOUSING - Housing is die-formed steel. Designed vertical fins serve as heat sink and resist
14” accumulation of dust and debris. Access panel provides single-screw access to driver and
(356mm) wiring connections.
OPTICAL UNIT - Featuring a slim 5.7” profile, housing is die-formed steel with a diffused
polycarbonate lens.
TOP VIEW 6, 8 LAMP OPTICS / DISTRIBUTION - High performance Symmetric (SU) distribution with Uplight. 8%
uplight reduces cave effect.
22.7” MOUNTING - Mounting options include Hook Cable Hangers (HCH10), Pendant Mount (PM), or
(577mm) Single Hub/Cable Mount (SHC).
SIDE VIEW DRIVER - State-of-the-art driver technology delivers superior energy efficiency and optimum
47.6” (1208mm) light output. LSI driver components are fully encased in potting for IP65 moisture resistance.
Complies with IEC and FCC standards. Optional 0-10V dimming driver available, with controls
by others.
ELECTRICAL - Universal voltage power supply, 120-277 VAC, 50/60 HZ input. LSI drivers feature
two-stage surge protection (including separate surge protection built into electronic driver)
meets IEEE C62.41.2-2002, Scenario 1, Location Category C, 10KV.
END VIEW OPERATING TEMPERATURE - -40°C to 50°C (-40°F to +122°F) SS max = 55°C, HO max = 40°C
FINISH - Fixtures are finished with LSI’s DuraGrip® polyester powder coat finishing process.
5.7”
(144mm) DuraGrip withstands extreme weather changes without cracking or peeling. Standard color is
white.
LIGHT OUTPUT - Linear High Bay Diffused Lens* DRIVE CURRENT - Choice of Super Saver (SS) or High Output (HO).
WARRANTY - Limited 5-year warranty.
Uplight Lumens Watts LPW PHOTOMETRICS - Please visit our web site at www.lsi-industries.com for detailed
Distribution photometric data.
SU AL SU AL SU AL SHIPPING WEIGHT - 2/4 Row = 23 lbs. 6/8 Row = 34 lbs.
LISTING - UL listed to UL 1598, UL8750 and other U.S. and International safety standards.
XLHB - 2 - SS 8,090 N/A 76 N/A 106 N/A Suitable for damp locations. For a list of the specific products in this series that are DLC
109 N/A 102 N/A listed, please consult the LED Lighting section of our website or the Design Lights website
XLHB - 2 - HO 11,111 N/A 148 N/A 106 N/A at www.designlights.org.
200 N/A 103 N/A
Cool White XLHB - 4 - SS 15,745 N/A 218 N/A 114 N/A
320 N/A 107 N/A
XLHB - 4 - HO 20,599 N/A 288 N/A 114 N/A
400 N/A 108 N/A
XLHB - 6 - SS 24,906 N/A 77 N/A 101 N/A
110 N/A 96 N/A
XLHB - 6 - HO 34,222 N/A 145 N/A 106 N/A
200 N/A 101 N/A
XLHB - 8 - SS 32,751 N/A 221 N/A 106 N/A
322 N/A 100 N/A
XLHB - 8 - HO 43,114 N/A 288 N/A 108 N/A
400 N/A 101 N/A
XLHB - 2 - SS 7,745 N/A
XLHB - 2 - HO 10,556 N/A This product, or selected versions of this product, meet the standards listed below. Please consult factory
for your specific requirements.
Neutral White XLHB - 4 - SS 15,420 N/A
XLHB - 4 - HO 20,253 N/A ARRA
XLHB - 6 - SS 23,467 N/A Funding Compliant damp location
XLHB - 6 - HO 32,299 N/A
XLHB - 8 - SS 31,057 N/A
XLHB - 8 - HO 40,612 N/A
LED *Uplight not available with Clear Lens or AL distribution.
LED Chips are frequently updated therefore values may increase.
Project Name Fixture Type © 2015
LSI INDUSTRIES INC.
174 Catalog #
LED LINEAR HIGH BAY (XLHB) WITH UPLIGHT
LUMINAIRE ORDERING INFORMATION SU LED SS CW UE CLDS IMSO SHC INDUSTRIAL
XLHB 4TYPICAL ORDER EXAMPLE:
Prefix Rows1 Distribution Light Drive Color Input Voltage Wiring Options
Source Current Temperature Location
XLHB - Linear High Bay 2 SU - Type S2 LED SS - Super Saver3 CW - Cool White UE - Universal CLDS - Center Leads EM - Emergency Battery Back Up
10 -20k Lumens 4 Symmetric HO - High Output3 NW -Neutral White Voltage ELDS - End Leads IMS0 - Integral Motion Sensor (0% Power)
E6C - End 6' Cord IMS30 - Integral Motion Sensor (30% Power)
Uplight (120-277v)
DIM - 0-10v Dimming4 (Controls by Others)
XLHB - Linear High Bay 6 347/480 - 347v BLS - Bi-Level Switching
30 -40k Lumens 8 or 480v
Wiring Plug Options5
515P - 5-15P Plug only (120 Volt)
L515P - 5-15PTwistlock Plug only (125 Volt)
L615P - 6-15PTwistlock Plug only (250 Volt)
L715P - 7-15P Twistlock Plug only (277 Volt)
L820P - 8-20P Twistlock Plug only (480 Volt)
L2420P - 24-20P Twistlock Plug only (347 Volt)
*See High Bay accessories page for more options.
Accessories
PM - Pendant Mount6 - 572484
SHC - Single Hub / Chain Mount7 - 572488
XLHB - 2/4 WG - Wire Guard - TBD
XLHB - 6/8 WG - Wire Guard - TBD
HCH10 - 10' Hook Cable Hanger (Pair) - TBD
TMK - Tandem Mounting Kit8 - 574554
Notes:
1 - 2 rows ~ 10k lms; 4 rows ~ 20k lms; 6 rows ~ 30k lms; 8 rows ~ 40k lms. See lumen output chart for specific outputs.
2 - Uplight not available in clear lens.
3 - Maximum operating temperature may be limited by drive current selections & mounting method. (HO = 40° C, SS = 55° C).
4 - 0-10V Dimming supplies extending leads outside of fixture. Controls by others.
5 - Standard fixture wiring will extend leads outside of fixture. If customer wants wiring by factory, a selection of desired options must be specified from available electrical items. Otherwise, customer
may use electrical accessories "by others".
6 - Pendant mount option supplies wiring box with 3/4" threaded hub for housing connections and attaching stem. Stem must be ordered as separate line item accessory.
7 - Single Hub Chain mounting supplies center hub with chains extended to each corner of fixture for ease of leveling.
8 - Tandem Mounting Kit consists of 2 end panels, 6' jumper cord, 10' cord, wire connectors, pair of HCH10 Cables & hardware. TMK not compatible with 2 row or 4 row fixtures.
LED
Project Name Fixture Type © 2015
Catalog # LSI INDUSTRIES INC.
175
LED HIGH BAY (XHB3) 128
INDUSTRIAL US patent 7,828,456 and US & Int'l. patents pending
DOE LIGHTING FACTS SMARTTEC™ ENERGY SAVING FEATURES:
Department of Energy has verified representative product test THERMAL CONTROL - Sensors in the driver enclosure and optical unit reduce drive current when
data and results in accordance with its Lighting Facts Program.
Visit www.lightingfacts.com for specific catalog strings. elevated ambient temperatures increase LED temperatures above design limits.
INTEGRAL MOTION SENSOR (IMS) - Choice of 2 optional internal passive infrared motion
LIGHT OUTPUT - XHB3 128
sensor activated switching of luminaire light levels, either 0 or 30% of power. High level light is
# of LEDS Lumens (Nominal) Watts activated when activity is sensed in target zone. High light level is increased to full bright in 1-2
S AL seconds upon detection. Low light level (0 or 30% of power) is activated when target zone is
145 absent of motion activity for ~ 2 minutes. Upon inactivity, light level is gradually ramped down
Neutral White Cool White 350 mA 128 16497 15849 192 (10-15 sec.) to low level to allow eyes time to adjust.
450 mA 128 19073 19298 DIMMING (DIM) - Optional 0-10 volt dimming enabled, with controls by others.
BI-LEVEL SWITCHING (BLS) - Optional bi-level switching responds to external line voltage
350 mA 128 14131 14453 145 signal from separate controller or sensor (by others), with low light level decreased to 30%
450 mA 128 17021 17741 192 maximum drive current.
EXPECTED LIFE - Up to 100,000 hours. See LSI web site for specific guidance.
LED Chips are frequently updated therefore values may increase. LEDS - An array with 128 LEDs, which feature select high-brightness LEDs in Cool White
(5000K) or Neutral White (4000K) color temperature, 70 CRI (nominal).
SHIPPING WEIGHTS - XHB3 DRIVE CURRENT - Available in 350mA and 450 mA.
DISTRIBUTION/PERFORMANCE - Symmetric or asymmetric distribution – high efficiency
UE 347 480 reflectors provide exceptional uniformity and vertical illumination without glare. Optional
25.6 30.2 30.2 diffused lens available to reduce visibility of diodes.
HOUSING - Housing is die-formed aluminum. Designed to resist birds and accumulation of dust
and debris. Access panel provides one-screw access to driver and wiring connections.
OPTICAL UNIT - Featuring an ultra-slim 1” profile, housing is die-formed aluminum with a clear
tempered glass lens. Unit is water-resistant, sealed to an IP67 rating. Patented integral single
blade heat sink does not trap dirt and grime, ensuring cool running performance over the life of
the fixture.
THE INDUSTRY'S ONLY BREATHABLE SEAL - Teflon® breather allows super-tight IP67 protection
while preventing temperature cycling from building up internal pressures and vacuums that can
stress optical unit seals and components.
MOUNTING - HoK and 6' cord (plug not included) or 3/4” pendant mount are available. Fixture
weight less than 30 lbs.
ELECTRICAL - Available with universal voltage power supply (120-277 VAC, 50/60 Hz input), 347
VAC and 480 VAC. Two-stage surge protection (including separate surge protection built into
electronic driver) meets IEEE C62.41.2-2002, Scenario 1, Location Category C.
DRIVER - Proprietary, state-of-the-art SmartTec™ driver technology provides unsurpassed
system efficiency, control and protection. LSI components are fully encased in potting for IP65
moisture resistance. Complies with IEC and FCC standards.
OPERATING TEMPERATURE - -40°C to +40°C (-40°F to 104°F).
FINISH - Standard color is white. Finished with LSI's DuraGrip® polyester powder coat process.
WARRANTY - Limited 5-year warranty.
LISTING - ETL listed to UL1598, UL8750 and other U.S. and international safety standards.
Suitable for damp locations. For a list of the specific products in this series that are DLC
listed, please consult the LED Lighting section of our website or the Design Lights website
at www.designlights.org.
PHOTOMETRICS - Application layouts are available upon request. Contact lighting.apps@lsi-
industries.com.
This product, or selected versions of this product, meet the standards listed below. Please consult factory
for your specific requirements.
ARRA IP67
Funding Compliant damp location
LED
Project Name Fixture Type © 2015
LSI INDUSTRIES INC.
176 Catalog #
LED HIGH BAY (XHB3) 128
LUMINAIRE ORDERING INFORMATION WHT INDUSTRIAL
TYPICAL ORDER EXAMPLE: XHB3 S LED 128 450 CW UE HM6
Prefix Distribution Light # of Drive Color Input Voltage Mounting Finish Optional Controls Sensor/Options
Source LEDs Current Temperature
LED 128 350 - 350mA
XHB3 S - Type S CW - Cool White UE - Universal HM6 - Hook WHT - White Virtinet Wireless Network Sensor
Symmetric 450 - 450mA NW - Neutral White Voltage and 6' Cord (requires a Ventura controller/Malibu ES2 - External Sensor
link) IMS03 - Integral Motion
AL - Asymmetric (120-277v) (blank) - None
VCM - Standard (revenue grade) Sensor (Turns Off)
347-480 - Univ. PM - Pendant VCMH - Standard (Host) IMS303 - Integral Motion
Voltage Mount (3/4”) DIM - 0-10 volt dimming
(required for satellite fixtures) Sensor (Dims to 30%)
(347-480v)
Options
DFL - Diffused Lens4
Stand-Alone Control
(blank) - None
DIM1 - 0-10V Dimming
(from external signal)
BLS1 - Bi-level Switching
(from external signal)
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
Description Order Number Description Order Number
Cast Mounting Hook EM01825 ROSB120 - WL Remote Box with 120V Occupancy Sensor C/F6
XHB3 Polycarb Shield 128 Kit 495844 C/F6
XHB3 Wire Guard 128 Kit 507510 ROSB277 - WL Remote Box with 277V Occupancy Sensor C/F6
C/F6
FOOTNOTES: RPSB120 - WL Remote Box with 120V External Photocell
1 - DIM and BLS cannot be ordered together.
2 - Do not specify for satellite units. RPSB208-277 - WL Remote Box with 208-277V External Photocell
3 - Not compatible with Virtinet wireless systems
4 - Diffused lens reduces light output. Consult factory.
5 - Cast mounting hook compatible with pendant option only. Must be ordered separately.
6 - Includes VCM. To be used in conjunction with VCM options in fixture. Consult factory.
DIMENSIONS
11 1/2” 2 1/8” 15-7/8” 9/16” 1”
(292mm) (54mm) (403mm) (14mm)(25mm)
9 7/8” 12 1/2” 21 7/8” 15-7/8”
(251mm) (317mm) (556mm) (403mm)
21-9/16”
(548mm)
21 7/8”
(556mm)
12-3/8”
(314mm)
POLYCARB SHEILD
Cast Mounting Hook LED
Fixture Type
Project Name © 2015
Catalog # LSI INDUSTRIES INC. 177
LED HIGH BAY (XHB3) 176
INDUSTRIAL US patent 7,828,456 and US & Int'l. patents pending
DOE LIGHTING FACTS SMARTTEC™ ENERGY SAVING FEATURES:
Department of Energy has verified representative product test THERMAL CONTROL - Sensors in the driver enclosure and optical unit reduce drive current when
data and results in accordance with its Lighting Facts Program.
Visit www.lightingfacts.com for specific catalog strings. elevated ambient temperatures increase LED temperatures above design limits.
INTEGRAL MOTION SENSOR (IMS) - Choice of 2 optional internal passive infrared motion
LIGHT OUTPUT - XHB3 176
sensor activated switching of luminaire light levels, either 0 or 30% of power. High level light is
# of LEDS Lumens (Nominal) Watts activated when activity is sensed in target zone. High light level is increased to full bright in 1-2
S AL seconds upon detection. Low light level (0 or 30% of power) is activated when target zone is
197 absent of motion activity for ~ 2 minutes. Upon inactivity, light level is gradually ramped down
Neutral White Cool White 350 mA 176 21686 21464 259 (10-15 sec.) to low level to allow eyes time to adjust.
450 mA 176 26219 26663 DIMMING (DIM) - Optional 0-10 volt dimming enabled, with controls by others.
BI-LEVEL SWITCHING (BLS) - Optional bi-level switching responds to external line voltage
350 mA 176 18197 18130 197 signal from separate controller or sensor (by others), with low light level decreased to
450 mA 176 22346 21669 259 30% maximum drive current.
EXPECTED LIFE - Up to 100,000 hours. See LSI web site for specific guidance.
LED Chips are frequently updated therefore values may increase. LEDS - An array with 176 high brightness LEDs; Cool White (5000K) or Neutral White (4000K)
color temperature, 70 CRI (nominal).
SHIPPING WEIGHTS 480 DRIVE CURRENT - Available in 350mA and 450 mA.
UE 347 35.2 DISTRIBUTION/PERFORMANCE - Symmetric or asymmetric distribution – high efficiency
30.6 35.2 reflectors provide exceptional uniformity and vertical illumination without glare. Optional
diffused lens available to reduce visibility of diodes.
HOUSING - Housing is die-formed aluminum. Designed to resist birds and accumulation of dust
and debris. Access panel provides one-screw access to driver and wiring connections.
OPTICAL UNIT - Featuring an ultra-slim 1” profile, housing is die-formed aluminum with a clear
tempered glass lens. Unit is water-resistant, sealed to an IP67 rating. Patented integral single
blade heat sink does not trap dirt and grime, ensuring cool running performance over the life of
the fixture.
THE INDUSTRY'S ONLY BREATHABLE SEAL - Teflon® breather allows super-tight IP67 protection
while preventing temperature cycling from building up internal pressures and vacuums that can
stress optical unit seals and components.
MOUNTING - HoK and 6' cord (plug not included) or 3/4” pendant mount are available. Fixture
weight less than 35 lbs.
ELECTRICAL - Available with universal voltage power supply (120-277 VAC, 50/60 Hz input), 347
VAC and 480 VAC. Two-stage surge protection (including separate surge protection built into
electronic driver) meets IEEE C62.41.2-2002, Scenario 1, Location Category C.
DRIVER - Proprietary, state-of-the-art SmartTec™ driver technology provides unsurpassed
system efficiency, control and protection. LSI components are fully encased in potting for IP65
moisture resistance. Complies with IEC and FCC standards.
OPERATING TEMPERATURE - -40°C to +40°C (-40°F to 104°F).
FINISH - Standard color is white. Finished with LSI's DuraGrip® polyester powder coat process.
WARRANTY - Limited 5-year warranty.
LISTING - ETL listed to UL1598, UL8750 and other U.S. and international safety standards.
Suitable for damp locations. For a list of the specific products in this series that are DLC
listed, please consult the LED Lighting section of our website or the Design Lights website
at www.designlights.org.
PHOTOMETRICS - Application layouts are available upon request. Contact lighting.apps@lsi-
industries.com.
This product, or selected versions of this product, meet the standards listed below. Please consult factory
for your specific requirements.
ARRA IP67
Funding Compliant damp location
LED
Project Name Fixture Type © 2015
LSI INDUSTRIES INC.
178 Catalog #
LED HIGH BAY (XHB3) 176
LUMINAIRE ORDERING INFORMATION WHT INDUSTRIAL
TYPICAL ORDER EXAMPLE: XHB3 S LED 176 450 CW UE HM6
Prefix Distribution Light # of Drive Color Input Voltage Mounting Finish Optional Controls
XHB3- S - Type S Source LEDs Current Temperature
High LED 176 350 - 350mA
Bay Symmetric CW - Cool White UE - Universal HM6 - Hook WHT - White Virtinet Wireless Network Sensor
AL - Asymmetric1 450 - 450mA NW - Neutral White Voltage and 6' Cord (requires a Ventura controller/Malibu ES3 - External Sensor
link) IMS04 - Integral Motion
(120-277v) (blank) - None
VCM - Standard (revenue grade) Sensor (Turns Off)
347-480 - Univ. PM - Pendant VCMH - Standard (Host) IMS304 - Integral Motion
Voltage Mount (3/4”) DIM - 0-10 volt dimming
(required for satellite fixtures) Sensor (Dims to 30%)
(347-480v)
Options
DFL - Diffused Lens5
Stand-Alone Control
(blank) - None
DIM2 - 0-10V Dimming
(from external signal)
BLS2 - Bi-level Switching
(from external signal)
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
Description Order Number Description Order Number
Cast Mounting Hook ROSB277 - WL Remote Box with 277V Occupancy Sensor C/F7
XHB3 Wire Guard 176 Kit EM01826
XHB3 Polycarb Sheild 176 Kit 509676 RPSB120 - WL Remote Box with 120V External Photocell C/F7
ROSB120 - WL Remote Box with 120V Occupancy Sensor 527787WHT
RPSB208-277 - WL Remote Box with 208-277V External Photocell C/F7
FOOTNOTES: C/F7
1 - Consult factory for availability.
2 - DIM and BLS cannot be ordered together. 5 - Diffused lens reduces light output. Consult factory.
3 - Do not specify for satellite units. 6 - Cast mounting hook compatible with pendant option only. Must be ordered separately.
4 - Not compatible with Virtinet wireless systems 7 - Includes VCM. To be used in conjunction with VCM options in fixture. Consult factory.
DIMENSIONS
12 1/4 [312 mm] 2 1/8 [53 mm]
10 7/8 [277 mm] 13 1/2 [341 mm] 23.10 23.53
24 1/8 [613 mm] 24 1/8 [612 mm] 14.01
23.13
4.08
176 LED XHB3 Wire Guard
Cast Mounting Hook LED
Fixture Type
Project Name © 2015
Catalog # LSI INDUSTRIES INC. 179
LED ENCLOSED & GASKETED - ANGLED LENS (EG3)
INDUSTRIAL PRODUCT HIGHLIGHTS
• Vaportight design
DIMENSIONS • High-impact resistant, reinforced fiberglass housing.
• Lens secured to housing with (8) polycarbonate latches. Optional stainless steel latches
4 1/4" are securely spring clipped to the housing, eliminating latch fall off during servicing.
(108mm) • Gasket is a continuously poured non-toxic, fire resistant, uniform width and thickness for
a tight seal.
6 13/16" (170mm) Shown with • National Sanitation Foundation and Canadian Standards Association approved and listed.
EG345MB
Accessory EXPECTED LIFE - Projected life of at least 60,000 hours. Contact factory for TM-21 detail.
LEDs - Use of closely-spaced medium-power, high-brightness chips minimizes pixelation and
MOUNTING (2) 1/4" X 5/8" SLOTS
provides uniform lens luminance. Available in Cool White (5000K), Neutral White (4000K)
ADJUSTABLE MTG. BRACKET and Warm White (3500K) color temperatures. CRI >= 80 (CW > 70). LM-80 reports
51 5/8" available.
DISTRIBUTION- Proprietary lens provides high lumen output with soft, reduced brightness.
LIGHT OUTPUT - EG3 - 4 foot CONSTRUCTION - Inner tray of .06” thick aluminum. Outer housing molded of high-impact,
polyester/UL5VA fiberglass with inner lip bonded with continuous, compressible, closed-
OPTIONAL Lumens Watts cell neoprene gasketing.
Cool WhiteTAMPERPROOF 7146 60 LENS - Injection molded high impact lens acrylic with lineal ribbing as standard.
Neutral White SCREWS 6260 60 MOUNTING - (2) stainless steel mounting brackets are furnished with each fixture, and can be
Warm White 6024 60 mounted to surface where required. Housing snaps into bracket easing installation. Brackets
accept V-hoKs or snap-on steel bail for cable suspension.
LED Chips are freSqTuAenINtlyLuEpSdSatSedTEthEeLreLfoAreTCvaHluEeSs OmPayTIiOncNreAaLse. ELECTRIAL- Universal voltage (120-277 Vac) input, 50/60 Hz (347 Vac). Power factor > 0.9,
THD < 20%, in-rush current < 15 Amps.
This product, or selected versions of this product, meet the standards DRIVER - High-performance isolated driver features over-voltage, over-current and short-
listed below. Please consult factory for your specific requirements. circuit (with auto-recovery) protection. Driver module is sealed to IP66 protection levels,
with a Class A sound rating. 0-10 volt dimming standard.
ARRA wet location OPERATING TEMPERATURE - -20°C - 35°C (-4°F - 95°F).
FINISH - All metal parts painted after fabrication following treatment with phosphate rust
Funding Compliant inhibitor. Finish coating of housing reflecting surfaces is with high-reflectance (minimum
92%) polyester powder.
WARRANTY - Limited 5-year warranty.
PHOTOMETRICS - Please visit our web site at www.lsi-industries.com for detailed
photometric data.
LIGHT OUTPUT - 7146 lumens @ 60 watts (4 foot); 14,293 lumens @118 watts (8 foot)
LISTING - Wet listed to UL1598 and other U.S. and Canadian safety standards. For a list of
the specific products in this series that are DLC listed, please consult the LED Lighting
section of our website or the Design Lights website at www.designlights.org.
ORDERING INFORMATION HO CW UE
EG3 4 S LEDTYPICAL ORDER EXAMPLE: Lumen Output Color Temp
HO - High Output CW - Cool White
Prefix Length Distribution Light Source NW - Neutral White Line Voltage Options
EG3 - LED 4 - 4 foot S - Symmetric LED WW - Warm White UE- Universal Voltage TP - Tamper resistant latches and screws
Enclosed 8 - 8 foot SL - Stainless Steel latches
& Gasketed (120-277V) 6CNP - 6' foot white cord, no plug
EM - 1100 Lm Emergency
347 - 347V SD50 - Step Dimming to 50%
LED ACCESSORY ORDERING INFORMATION Order Number
EG34AC
Description EGCHS
(2) snap-on bails & (2) 10’ aircraft cables EGCHS5
(2) snap-on bails & (2) 3’ jack chains EG45MB
(2) snap-on bails & (2) 5’ jack chains
Stainless Steel 45o mounting bracket
Project Name Fixture Type © 2015
LSI INDUSTRIES INC.
180 Catalog #
LED WIDE ENCLOSED & GASKETED - EGW
PRODUCT HIGHLIGHTS INDUSTRIAL
• Vaportight design
• IP67 Certified (comparable to NEMA 6) 5.95"
• NEMA 4X rated / NEMA 250-2003 (151mm)
• NSF / ANSI Standard 2
• UL50E: standards for safety enclosures of electrical equipment 14.61"
• 12 Point stainless steel latching and stainless hardware (371mm)
• Sloped housing design promotes water displacement
• Optional stainless steel “V” bracket or “SB” surface bracket accessory LIGHT OUTPUT - LED EGW
• RoHS Compliant
Lumens (Nominal)
EXPECTED LIFE - Projected life of at least 60,000 hours. Contact factory for TM-21 detail.
LEDs - Use of closely-spaced medium-power, high-brightness chips minimizes pixelation and CW NW WW W
HO 6350 5670 5760 57
provides uniform lens luminance. Available in Cool White (5000K), Neutral White (4000K) VHO 10120 9310 9150 88
and Warm White (3500K) color temperatures. CRI >= 80 (CW > 70). LM-80 reports
available. LED Chips are frequently updated therefore values may increase.
LENS - Frosted, injection molded, high impact acrylic is standard. An optional clear lens is
also available. This product, or selected versions of this product, meet the standards
HOUSING - The inner gear tray is constructed of code gauge steel. The outer housing is listed below. Please consult factory for your specific requirements.
constructed of fiberglass reinforced polyester. Gasketing in the housing is constructed of
closed cell polyurethane. Conduit entrance is provided at one end. All external hardware ARRA
and hanging components are constructed of stainless steel.
ELECTRICAL - Universal voltage (120-277 Vac) input, 50/60Hz. Power factor > 0.9, THD Funding Compliant wet location
< 20%, in-rush current < 15 Amps.
DRIVER - High-performance isolated driver features over-voltage, over-current and short-
circuit (with auto-recovery) protection. Driver module is sealed to IP66 protection levels,
with a Class A sound rating. 0-10 volt dimming standard.
OPERATING TEMPERATURE - -30°C to 45°C (-22°F to 113°F).
FINISH - All metal parts are painted after fabrication following treatment with phosphate rust
inhibitor. Finish coating of housing reflecting surfaces is with high-reflectance (minimum
92%) polyester powder.
WARRANTY - Limited 5-year warranty
PHOTOMETRICS - Please visit our website at www.lsi-industries.com for detailed
photometric data.
LISTING - Listed to UL 1598 and UL 8750
ORDERING INFORMATION
EGW 4TYPICAL ORDER EXAMPLE: S LED HO CW UE
Prefix Length Distribution Light Drive Color Temperature Line Voltage Options
EGW - LED Wide 4 S - Symmetric Source Current
LED HO - High Output CW - Cool White UE - Universal CL - Clear Lens
Enclosed & VHO - Very High NW - Neutral White Voltage (120-277V) W6C1631 - 6-foot, 16 gauge, 3 conductor cord with Wet Location fitting
Gasketed Output WW - Warm White W6C1641 - 6-foot, 16 gauge, 4 conductor cord with Wet Location fitting
347 - 347V W6C1651 - 6-foot, 16 gauge, 5 conductor cord with Wet Location fitting
HUB - 3/4" N.P.T. HUB IN BACK / TOP (Damp Location Rated Only)
LT - Lens Safety Teather
EM - 1100 Lumen Emergency Battery Pack
SD50 - Step Dimming to 50%
ACCESSORY ORDERING INFORMATION 1- Specific voltage must be specified. Cord feed entrance available on housing end only.
Description Order Number LED
Stainless Suspension Hangers ("V" Hook) (Pair) EGWVB
Cable Hanging Set with Loop 10 ft. (pair) LCH10
Cable Hanging Set with Loop 20 ft. (pair) LCH20
Stainless Steel Surface Bracket EGWSB
Project Name Fixture Type © 2015
LSI INDUSTRIES INC.
Catalog # 181
THERMOPLASTIC LED COMBO EXIT/EMERGENCY (LEPC)
HOUSING BATTERY
• NiCad Battery Standard
• Contractor Oriented Snap Together • 15 Yr. Life Expectancy within 0°-40°C
Design Operating Temps
• Universal Chevron Selection MOUNTING
• Universal Mount with Canopy
• Damp Location Rated • CODE CONFORMANCE & STANDARDS
• UL 924
• High Impact Thermoplastic • N.E.C.
• N.F.P.A. Life Safety Code 101
• UL 94-5VA flame rating• • UL 90 Minute Run Time, 24Hr Recharge
Time
ILLUMINATION
damp location
• L.E.D. source - available in Long Life,
High Output Red or Green
• Low Energy consumption (2.8 Watts)
LIFE SAFETY • Fully Illuminated 6 Inch Letter with ¾”
StrKe
1.8” 13.8” • 3.5 watt LED Lightbar with Adjustable
Lamps
ELECTRONICS
• 120/277 60Hz Dual Voltage
• Self Test and Diagnostics Option
Available
9.5” • Low voltage Disconnect Protection
• Solid State Charger
• Automatic Brown out protection
• Momentary Test switch with LED Charge
Indicator
• Overload and Short-circuit Protection
Wire guard available. Order separately.
See wire guard chart in Accessories section.
ORDERING INFORMATION
LEPCTYPICAL ORDER EXAMPLE: R U W SD2
Prefix Letter Color Number of Faces Housing Options Accessories
LEPC R - Red U - Universal (Includes 2 W - White
G - Green SD2-Self test / self diagnostics VL - Vandal Lens (backmount)
Face Plates, Back Plate, BK - Black WVL - Wet Location Vandal Lens (backmount)
And Mounting Canopy)
LED
Project Name Fixture Type © 2015
LSI INDUSTRIES INC.
182 Catalog #
THERMOPLASTIC LED COMBO EXIT / EMERGENCY (LPRX)
HOUSING BATTERY
• Contractor Oriented Snap Together • 6 volt NiCad Battery Standard
Design • 15 Yr. Life Expectancy within 0°-40°C
• Universal Chevron and Face Selection Operating Temps
• Field-selectable Top or Side mounting of • Optional Remote Capacity Available - Up
Emergency Lamps to 2 PRLED Remote Heads
• High Impact Thermoplastic (UL94-5VA) • 90 minute UL Listed Emergency Runtime,
24Hr Recharge Time
ILLUMINATION
• L.E.D. source - available in long life, high ELECTRONICS DIMENSIONS LIFE SAFETY
output red or green • 120/277 Dual Voltage, 60Hz
• Low Energy consumption • Low voltage Disconnect Protection
• Fully Illuminated 6 Inch Letter with ¾” • Solid State Charger
StrKe • Automatic Brown out protection
• Two 6 volt 1.1 Watt LED Heads • Momentary Test Switch with LED
Indicator
• Overcharge Protection
damp location MOUNTING
• Universal J-Box Mount with Canopy
(ceiling, wall or end mount)
CODE CONFORMANCE & STANDARDS SPACING GUIDES
• UL 924
• N.E.C Using multiple units mounted at a typical
• N.F.P.A. Life Safety Code 101 7.5’ delivers 18’ center-to-center
• Damp Location Rated 18' spacing on a 3’ wide
egress path.
Wire guard available. Order separately. 1fc Average
See wire guard chart in Accessories section. 14'
3'
Using 1fc Average
multiple units
mounted at a typical 7.5’
delivers 14’ center-to-center
spacing on a 6’ wide egress path.
6'
ORDERING INFORMATION
LPRX R UTLYUPIMCAILNOARIDREREEOXARMDPELER: ING INFORMATION WH LD11 R
TYPICAL ORDER EXAMPLE: PEC24 LPW LED SS WW UE
Prefix Letter Color # of Faces Housing Lamp Heads Options
LPRRXePc-reesCfsoiexmdbDoirect/Indirect L-- PGRWWreedhe-intLeoSuSvheiheriUeleddlIPd-PnlUecartlnfueoisdvra,eetrsBesda2aclkFLaPicgleahLtteES,Dource BWKH--BWlaHShcDSOiktre-i-vSHeuigpCheurOrSrueatpvneutrt LD1L1E-D1H.1eCaNCWodWWlsoatr--tTCNeoemoultprWaelhrWaitethRSuitDre-e22-.S2eWlf taUetnstsitvUe/RIrEnsespeam-lul1foIt2ndtV0peia-ou2Cgtl7tnaVa7poogVasletctaiigcteys1 Options
PEC22 - (2x2) R FC-1 - 6’ 3/8” (3) #18 leads
G EM - 1100 LM Emergency
CPL - Chicago Plenum
PEC24 - (2x4) RAD - Round Acarynldic Mounting Canopy WW - Warm White Accessories
Diffuser
VL - Vandal Lens (backmount)
1 - For use with single or double PRLED remote lamps only LED
Project Name Fixture Type © 2015
Catalog # LSI INDUSTRIES INC.
183
LED WET LOCATION EM UNIT (LSWL)
LIFE SAFETY DIMENSIONS HOUSING BATTERY
57/8” • Impact Resistant 94-5VA polycarbonate • Maintenance Free 6 Volt NiCad Battery
• Gasketed and Sealed Hinged Cover Standard
123/16” • Cold Weather (-20°C) Standard • Remote Capable up to 3.7 Watt in
• Gray Finish Standard temperatures ranging from 0°-50°C -
Powers up to (2) PRLED Remote Heads
ILLUMINATION • 90 Minute Run Time, 24Hr Recharge
• Fully Adjustable 1.9watt LED Nema Rated Time
Lamp Heads
ELECTRONICS
wet location • Charge Rate/Power On LED Indicator
Light with Test Button
• Overload and Short-circuit Protection
• Low voltage Disconnect
• Brown-out Protection
• 120-277 Volt Rated, 60Hz Input
CODE CONFORMANCE & STANDARDS
• UL 924 N.E.C, N.F.P.A. 101
• IP65 Rated
35/8”
65/10”
Wire guard available. Order separately.
See wire guard chart in Accessories section.
8”
ORDERING INFORMATION
LSWL GYTYPICAL ORDER EXAMPLE:
Prefix Finish Accessories
LSWL BK - Black VL - Vandal Guard (back mount)
GY - Gray
LED
Project Name Fixture Type © 2015
LSI INDUSTRIES INC.
184 Catalog #
THERMOPLASTIC LED EMERGENCY UNIT (LTEM)
HOUSING BATTERY
• Impact Resistant Thermoplastic Housing • NiCad Battery Standard
(UL94-5VA) • 15 Yr. Life Expectancy within 0°-40°C
• Universal J-box Mounting
• Completely Self Contained Operating Temps
• Stylish Low Profile Contemporary Design • 2.2 Watts of Remote Battery Power is
• Damp Location Rated
Optional
ILLUMINATION
• Fully Adjustable 1 watt LED Heads ELECTRONICS
• Low voltage Disconnect
• AC Lockout DIMENSIONS LIFE SAFETY
• Brown-out Protection
• 120-277 Volt Rated, 60Hz
• SD2 Self Test/Self Diagnostics Option
Available
damp location CODE CONFORMANCE & STANDARDS 3-1/4”
• UL 924 N.E.C, N.F.P.A. 101 (83mm)
• ETL Listed 90 min. Run Time / 24 Hr
Recharge Time 4-1/4”
(108mm)
8”
(203mm)
10-1/5”
(267mm)
Wire guard available. Order separately. 3-1/2”
See wire guard chart in Accessories section. (89mm)
2”
(51mm)
SPACING GUIDES
Using multiple units mounted at a typical
7.5’ delivers 18’ center-to-center
spacing on a 3’ wide
18' egress path.
1fc Average 3'
14'
ORDERING INFORMATION WH SD2 Using 1fc Average
multiple units
LTEMTYPICAL ORDER EXAMPLE:
Prefix Housing Options mounted at a typical 7.5’
delivers 14’ center-to-center
spacing on a 6’ wide egress path. 6'
LTEM - (2) 1 Watt LED Heads WH-White SD2-Self Test / Self Diagnostics
BK-Black R - 2.2 Watts Remote Capacity1
1 - For use with single or double TMLED remote lamps only
LED
Project Name Fixture Type © 2015
Catalog # LSI INDUSTRIES INC.
185
LIFE SAFETY UNIVERSAL LED REMOTE HEAD The LUVR LED Remote Lamp is the first remote head of its kind to offer outstanding light
output that is also compatible with ANY 6 volt or 12 volt battery system. The options are
DIMENSIONS endless for applications, including mounting to existing back up units for LED retrofit
opportunities.
damp location
FEATURES
SPACING GUIDES • Designed to operate from any 6V or 12V power source, no need to specify
• Each fully-adjustable, high-intensity lamp head contains 3 LEDs with individual,
engineered refractors for maximum distribution - Total wattage 3.6W per head.
• Uniform lighting pattern provides optimal illumination over required path of egress,
typical two lamp fixture provides 60 foot center-to-center spacing
• Rugged, injection-molded, high-temperature thermoplastic housing
• Available as remote or alternate head for traditional battery units
• Standard finish: White
CONSTRUCTION
The LUVR LED housing is constructed of rugged, injection-molded, high-temperature
thermoplastic housing in white.
ILLUMINATION
High-intensity lamp head contains 3 LEDs with individual, engineered refractors for
maximum distribution.
ELECTRONICS
Compatible with any 6 volt or 12 volt battery system (sold separately), that provides a
minimum of 3.6 watts per lamp. Utilizes 3 bright white LEDs with a total output of 120
lumens.
CONFORMANCE TO CODES & STANDARDS
The LUVR Series meets or exceeds the following: UL924, NEC requirements and NFPA 101.
60'
Two (2) 1fc Average
LUVR LED
lamps installed on a
typical battery pack/charging
unit. Using multiple units mounted at a
typical 8.5’ delivers 60’ center-to-center 6'
spacing on a 6’ wide egress path.
ORDERING INFORMATION WH
LUVRTYPICAL ORDER EXAMPLE:
Prefix Watts Finish
LUVR1 WH - White Housing w/White Face
2 - 3.6 Watts BK - Black Housing w/White Black
LED 1 - Mounting Plate not included
Project Name Fixture Type © 2015
Catalog # LSI INDUSTRIES INC.
186
REMOTE HEADS
PRLED - REMOTE LAMPS FOR LPRX & LSWL LED COMBO UNIT Single Lamp with LIFE SAFETY
Weatherproof (WP) Option
FEATURES
• Available for use with EX with R6 option and LPRX combo unit only Double Lamp with
• Each lamp head contains 8 long lasting, efficient, ultra-bright white LEDs No Options
• Rugged, injection-molded UL94 V-0 flame retardant, high-temperature thermoplastic
housing damp location
• Low cost - easy installation
• Single and double head configurations available
• Optional Self Test/Self Diagnostics (SD2) available
• Suitable for damp location
• Optional wet location rating (WL) available
ORDERING INFORMATION
PRLED SD2TYPICAL ORDER EXAMPLE:
Prefix Options
PRLED - Single Remote Lamp SD2-Self Test / Self Diagnostics1
2PRLED - Double Remote Lamp WL- Wet Location
1 - Remote Lamps with SD2 option are compatible with LED units with SD2 option only
TMLED - REMOTE LAMPS FOR LTEM EMERGENCY LIGHTING UNIT
FEATURES
• Available for use with LTEM emergency unit only
• Each lamp head contains 8 long lasting, efficient, ultra-bright white LEDs
• Rugged, injection-molded UL94 V-0 flame retardant, high-temperature thermoplastic
housing
• Low cost - easy installation
• Single and double head configurations available
• Optional Self Test/Self Diagnostics (SD2) available
• Suitable for damp location
• Optional wet location rating (WL) available
ORDERING INFORMATION SD2
TMLEDTYPICAL ORDER EXAMPLE:
Prefix Options
TMLED - Single Remote Lamp SD2-Self Test / Self Diagnostics1
2TMLED - Double Remote Lamp Wl- Wet Location
1 - Remote Lamps with SD2 option are compatible with LED units with SD2 option only
CONFORMANCE TO CODES & STANDARDS
U.L. listed and meets or exceeds the following: U.L. 924, N.E.C. requirements and N.F.P.A. 101.
LED
Project Name Fixture Type © 2015
Catalog # LSI INDUSTRIES INC.
187
LED TERMS & CONDITIONS
ALL ORDERS MUST INCLUDE A WRITTEN PURCHASE ORDER
TERMS - Net 30 days after the date of Invoice. Invoices that are past due are subject to a 1 ½ percent per month service
charge.
PRICES - Prices are subject to change without notice. All orders are subject to a minimum of $150. The order minimum may
be adjusted at time of order entry commensurate with the products and parts ordered and to accommodate order handling
costs. Parts only orders are subject to a $50 minimum charge.
COST OF COLLECTION - If Buyer defaults with respect to any payment due the Seller, the Buyer shall pay Seller for all costs
and expenses, including legal expenses and attorney fees, incurred by Seller in exercising any of its rights or remedies.
TRANSPORTATION AND DELIVERY – Prices are F.O.B. shipping point, shipping and handling allowed on orders with a selling
price of $2,000 or more, per order, per destination in the continental United States. Orders that fail to qualify for the
allowance will be charged Seller’s actual shipping and handling costs. Shipments to Alaska and Hawaii will deviate from
Seller’s standard terms and condition and Buyer will be charged Seller’s actual shipping and handling costs, regardless of
order size. On all shipments, LSI freight policy is the best way, less than truckload commercial carrier.
SCHEDULED SHIP DATE- The scheduled ship date is an estimate only. Seller is not responsible for missed ship dates and late
deliveries caused by the carrier. Seller will not accept any back charges for late deliveries.
CHOICE OF CARRIER- LSI reserves the right to ship goods via the most economical routing and to consolidate shipments
to the most economical groupings per schedule date. If alternative shipping means are requested by the buyer, the buyer
assumes the additional transportation cost.
SPECIAL SHIPPING REQUEST- Special shipping requests will be accommodated when possible. Buyer’s request for a
particular carrier and/or special shipping will require the Buyer to pay the difference in the rate of transportation and may
incur additional handling charges. Buyer may be charged extra for optional packaging, for the costs for advance notification
by carrier, residential delivery, and for special equipment needs such as lift gates, flat beds or for inside delivery. City
delivery or special services requested such as redelivery, expedited surface delivery or delayed delivery charges will be
charged to the Buyer at Seller’s actual cost.
C.O.D. ORDERS- Seller will not ship orders C.O.D. If Buyer does not have an active credit account with Seller, Buyer must pay
cash in advance at order entry.
DAMAGE- Title to any goods sold and the risk of loss of such goods passes to Buyer upon delivery by Seller or Seller’s
vendors to the carrier, and any claims or losses or damage in transit shall be filed by Buyer directly with the carrier. Buyer
shall inspect all goods immediately upon delivery for concealed damage. Buyer must notate any damage/shortage on
carrier’s delivery receipt. Buyer must report all damage to goods to the carrier within 10 days of delivery of the goods. UPS
and FedEx damaged shipments must be reported to Seller within 10 days and must be in the original cartons at the original
delivery point for inspection.
CANCELLATION OR SUSPENSION OF ORDERS - Cancellation or suspension of orders will be accepted by Seller only upon
terms that will indemnify the Seller for liabilities and expenses incurred and for commitments made by Seller and which will
provide for profit on work in process and for the contract value of goods completed and ready for shipment. Postponement
of deliveries at Buyer’s request, if for a period of more than thirty (30) days, will not be made without Seller’s approval first
being obtained. All postponements are subject to storage and handling charges.
RETURNS - No returns will be accepted without prior approval. All requests must be made within 30 days of the invoice date.
POLES- Poles will not be accepted unless the return is due to warranty or Seller’s error.
ELIGIBILITY- Requests to return custom built products or modified standard products with options will not be accepted.
Requests to return products that are unique to a customer or program will not be accepted. All returns must arrive back
to the Seller in good working and resalable condition. Items must be returned in the original packaging. Any damage to
returned goods will be the responsibility of the buyer. Products not manufactured by the Seller may be subject to the
original supplier’s return or cancellation policy.
188
TERMS & CONDITIONS LED
FEES – Authorized returns will be charged for both inbound and outbound freight and a minimum service charge of thirty-five
percent (35%) of the product value.
REPLACEMENTS- Seller has the option of either replacing defective goods or crediting Buyer for the purchase price of such
goods. A new Purchase Order is required for replacement orders.
TAXES - All prices, quotations, orders, and agreements are subject to all Federal, State, and Local taxes. These taxes will be
added to the invoice unless legal proof of exemption is provided. LSI reserves the right to invoice separately for the taxes
should it be necessary to make payment where they were not included at the time of invoicing.
WARRANTY – All requests for warranty assistance must be submitted to LSI and direction must be given from LSI prior to
any action being taken. No claims for cost of material or repair will be accepted without prior written approval. For product
warranty see LSI’s published Limited Warranty.
CHANGES - LSI reserves the right to make modifications or changes to any of its products, pricing, Limited Warranty and Terms
and Conditions without prior notice.
1/22/2013
189
LED WARRANTY
LIMITED WARRANTY – LED Light Fixtures:
LSI Lighting Solutions warrants cataloged LED Light Fixtures and LED components manufactured by LSI against defects in
materials and workmanship for a maximum period of 5 years from date of original shipment from LSI as follow:
• Year 1 - LSI will replace, reimburse or credit 100% of the original purchase price of the defective components or light
fixtures. LSI will pay directly or reimburse established labor costs or will utilize our network of certified contractors
involved with the replacement or repair of defective LED components or complete light fixtures.
• Years 2 – 5 – LSI will replace, reimburse or credit 100% of the original purchase price of the defective components
or light fixtures. LSI will not reimburse or pay labor costs associated with replacement or repair of defective LED
components and light fixtures.
At LSI’s option, any product proven to be defective within the warranty periods described above will either be repaired, replaced,
or credited. LSI reserves the right to replace defective fixtures or components utilizing the same or functionally similar products
that are new, repaired or reconditioned. LSI WILL NOT HONOR ANY WARRANTY CLAIM WITHIN THE 5 YEAR WARRANTY PERIOD
WITHOUT PRIOR WRITTEN APPROVAL. Contact our field service department at 1-800-436-7800 (ext. 3300) in order to obtain
approval.
This warranty only covers items manufactured by LSI. This includes LED luminaires, Power Supplies and Modules. The above
warranty does not include components or fixtures not manufactured by LSI. These items carry the warranty of their respective
manufacturers. The paint finish warranty on LED light fixtures is listed below.
LED MODULES – Failure is defined as having 10% or more LEDs not illuminated in a light fixture. LEDs that fail within the
manufacturer’s warranty period will be exchanged. LSI will not honor a cash reimbursement claim to cover material charges
for replacement material outside the first year from date of shipment. No charges for rental of equipment, travel time or
labor will be accepted. LED modules are warranted for a period of 5 years; however the Warranty does not cover failures due
to abnormal conditions. These abnormal conditions include, but are not limited to, under/over voltage, under/over current,
excessive switching and excessive ambient temperatures. LSI reserves the right to determine what conditions are considered
abnormal as a result of product failure.
LIMITED WARRANTY – HID and Fluorescent Light Fixtures and Poles:
LSI Lighting Solutions warrants cataloged HID and Fluorescent Light Fixtures and Poles manufactured by LSI against defects in
materials and workmanship for a period of 2 years from date of shipment. LSI will replace, reimburse or credit 100% of the original
purchase price of the defective HID and Fluorescent light fixtures or poles. At LSI’s option, any product proven to be defective
within the 2 year warranty period will either be repaired or replaced utilizing the same or functionally similar product that is new,
repaired or reconditioned. Replacement part warranty starts from the original order ship date. LSI will not reimburse or pay labor
costs associated with replacing or repairing defective HID or Fluorescent light fixtures or poles.
BALLASTS - Ballasts, capacitors, and ignitors are warranted by the ballast manufacturers. Please check the manufacturer’s published warranty for the
ballast in question. Ballasts that fail within the manufacturer’s warranty period will be exchanged by the local ballast manufacturers’ authorized distributor
or by LSI, acting as their agent. The ballast manufacturer or its agents will honor a cash reimbursement claim to cover material charges for replacement
ballasts, capacitors, or ignitors.
LAMPS - Lamps are not manufactured by LSI and are specifically excluded from this warranty. No claims for replacement of defective lamps or labor
associated with such replacement will be accepted. Contact the lamp manufacturer for warranty assistance.
POLES - All LSI poles are guaranteed to meet the EPA requirements listed. LSI is not responsible if a pole order has a lower EPA rating than the indicated
wind-loading zone where the poles will be located. EPA ratings are for locations 100 miles away from hurricane ocean lines. Note: Hurricane ocean lines
are the Atlantic and Gulf of Mexico coastal areas. For locations within the Hurricane zone, or areas outside the United States contact LSI for the pole EPA
for your location. This warranty does not apply to fatigue damage or failure resulting from induced vibration and/or harmonic vibration caused by the
movement of air currents around the product or by any other local condition.
BANNERS, FLAGS, STREAMERS, SIGNS AND OTHER EXTRANEOUS ITEMS ATTACHED TO POLES VOIDS ALL POLE WARRANTIES
AND MAY CREATE SEVERELY HAZARDOUS CONDITIONS. LSI accepts no responsibility for harm or damage caused in these
situations.
190
WARRANTY LED
LIMITED WARRANTY – Light Fixture and Pole Paint Finishes
POLE FINISHES - LSI poles feature the Dura Grip® baked-on polyester-powder finishing process. The Pole finish is warranted for
5 years from date of shipment against cracking, peeling, chalking or fading. Dura Grip® Plus coated poles are warranted for a
period of 7 years from the date of shipment.
OUTDOOR FIXTURE FINISHES - LSI fixtures feature the Dura Grip® baked-on polyester-powder finishing process. The fixture finish
is warranted for a period of 5 years from date of shipment against cracking, peeling, chalking or fading.
INDOOR FIXTURE FINISH – The indoor fixture finish is warranted for normal indoor use for a period of 2 years from date of
shipment.
COMPOSITE FIXTURES – Composite fixtures are warranted for a period of 5 year from date of shipment against corrosion
CAUSTIC OR CORROSIVE ENVIRONMENTS -Fixtures and Poles manufactured and painted by LSI may be damaged by highly
caustic or corrosive environments. Such environments may include, but are not limited to, seashore and marine applications,
chemical processing facilities, highly watered or fertilized environments and car washes. While many of LSI’s products can be
safely applied in these locations, their useful life, including the painted surfaces, may be reduced due to the conditions found
in these harsh environments. LSI warrants its products against these severe conditions.
FIXTURE AND POLE PAINT FINISH WARRANTY CLAIMS - If during the warranty period the exterior coating shows signs of failure,
the Buyer must notify LSI in writing and furnish proof of purchase within 60 days of such failure or deterioration becoming
evident. Components will be repaired or replaced at the discretion of LSI. LSI will, at its option, reimburse the customer for
the cost to repair the components or will make replacement components available from LSI’s factory. Transportation, removal,
and installation costs are not included in the replacement.
TERMS AND CONDITION OF LIMITED WARRANTY:
PROPER INSTALLATION - LSI will warrant Light fixtures, components or poles provided products are properly installed following
the directions in the product’s installation instructions, in their intended application and used in compliance with all applicable
local, state and national safety regulations and codes. LSI will not warrant products damaged due to installer connections
and/or assembly errors.
EXCLUDED FROM LSI LIMITED WARRANTY - Both limited warranties only cover items manufactured by LSI. The above limited
warranties also do not include equipment and components not manufactured by LSI (See above limited warranties). These
items carry the warranty of their respective manufacturers. The Limited Warranty also excludes damage or failure caused
by acts of God, falling objects, explosion, fire, misuse or abuse in application (see product spec sheets for application
guidelines), or any other such occurrences beyond LSI’s control are also not warranted. No charges for rental of equipment,
travel time or labor will be accepted.
ELIGIBILITY - The limited warranty may be transferred to subsequent purchasers of the product, provided that the product is
resold in new condition and in its original packaging.
MAINTENANCE – Poles and Light Fixtures must be inspected and maintained at least annually. Repair of the finish along with
structural and electrical components must be conducted on a regular basis to ensure a safe and attractive product.
PROPER HANDLING AND STORAGE - LSI shall claim the warranty to be null and void if the coating fails due to circumstances
beyond its control including damage during shipping, handling, unpacking, or installation; damage caused by moisture
or other contaminants entrapped between protective packaging materials and coated surface, thus constituting improper
storage, prior to placement in service; damage or failure caused by acts of God, falling objects, external forces, explosion,
fire, misuse or abuse in application, or any other such occurrences beyond LSI’s control.
RIGHT TO EXAMINE- LSI Industries reserves the right to examine all products and/or any associated component to determine the
cause of failure and pattern of usage. LSI may require the material be returned to LSI, as part of the evaluation process. LSI
Industries reserves the right to be the sole judge as to whether any items and components are defective and or covered under
this warranty.
CHANGES - LSI reserves the right to make modifications or changes to any of its products, pricing, Limited Warranty and Terms
and Conditions without prior notice.
This warranty is exclusive in lieu of all other warranties whether written, oral, expressed or implied and shall constitute the sole
and exclusive remedy of Buyer and liability of LSI. LSI is not liable nor warrants the installers and their installation LSI’s products
are not sold as a “consumer product” under 15U.S.C. 2301.
Effective Date: 12/15/2014 191
INDEX LTEM........................................................ 185 XGBWM3................................................... 72
LUVR....................................................... 186 XHB3 128................................................. 176
FIXTURES LXC2........................................................ 164 XHB3 176................................................. 178
111.......................................................... 161 LXW2....................................................... 163 XHYP3..................................................... 106
882.......................................................... 147 MWW....................................................... 159 XIG........................................................... 104
884.......................................................... 147 PASU.......................................................... 24 XLCM........................................................... 8
888.......................................................... 147 PDL6K...................................................... 162 XLCS............................................................ 6
2TMLED................................................... 187 PEC14...................................................... 139 XLHB........................................................ 172
AD 100..................................................... 124 PEC22...................................................... 139 XLHB SU.................................................. 174
AD 150..................................................... 124 PEC24...................................................... 139 XLM........................................................... 34
AD 200..................................................... 124 PFLM....................................................... 102 XLPG........................................................ 114
ASC14...................................................... 136 PMX......................................................... 170 XLPGK..................................................... 116
ASC22...................................................... 136 PRSU......................................................... 30 XLS............................................................ 32
ASC24...................................................... 136 PWM.......................................................... 76 XLXM3....................................................... 40
AUD......................................................... 156 RD 100..................................................... 130 XNPG....................................................... 110
AUP.......................................................... 156 RD 150..................................................... 130 XPG3........................................................ 112
BD 200..................................................... 126 RD 200..................................................... 130 XPT3.......................................................... 20
BD 300..................................................... 126 RD 300..................................................... 130 XPTS3........................................................ 18
CIRU........................................................ 154 RWD 200................................................. 128 XPWS3...................................................... 74
CIRUS...................................................... 152 S.............................................................. 150 XRMU........................................................ 28
CRU SM................................................... 118 SBAM......................................................... 96 XRSU......................................................... 26
CRUS SM................................................. 120 SBAS.......................................................... 98 XRT14...................................................... 143
DUT 201................................................... 160 SDL.......................................................... 151 XRT22...................................................... 143
DW........................................................... 148 SHPEC22................................................. 140 XRT24...................................................... 143
EG3.......................................................... 180 SHPEC24................................................. 140 XSB............................................................ 10
EGW......................................................... 181 SLI22....................................................... 138 XSL2........................................................ 122
FLRK22.................................................... 145 SLI24....................................................... 138
FLRK24.................................................... 145 SWM.......................................................... 79 POLES/BRACKETS
GA14........................................................ 141 SWS........................................................... 78 ABOLITE NOSTALGIC POLES..................... 58
GA22................................................ 141, 142 TMLED..................................................... 187 ABOLITE POLE BRACKETS........................ 68
GA24................................................ 141, 142 W442....................................................... 149 ABOLITE POLES......................................... 59
HRZ.......................................................... 158 W444....................................................... 149 ALUMINUM FLUTED ROUND W/
IMXNB..................................................... 171 W448....................................................... 149 DECORATED BASE POLES......................... 48
LEL24...................................................... 144 WNA10..................................................... 146 ALUMINUM ROUND HINGED BASE
LEPC........................................................ 182 WNA14.. ................................................... 146 POLES........................................................ 52
LPASC 14................................................. 137 XALV AL............................................... 90, 92 ALUMINUM ROUND POLES...................... 50
LPASC 22................................................. 137 XALV SL............................................... 86, 88 ALUMINUM ROUND TAPERED POLES...... 54
LPASC 24................................................. 137 XALV WC.............................................. 82, 84 ALUMINUM SQUARE POLES
LPEC14.................................................... 132 XAMU........................................................ 14 (SOFT CORNER)........................................ 56
LPEC22.................................................... 132 XASU......................................................... 12 AREA LIGHTING BRACKETS - 3”
LPEC22 SM ............................................. 133 XAWMU..................................................... 80 REDUCED DRILL PATTERN........................ 62
LPEC24.................................................... 132 XAWSU...................................................... 80 AREA LIGHTING BRACKETS - BOLT-ON.... 64
LPEC24 SM.............................................. 133 XBAL.......................................................... 94 AREA LIGHTING BRACKETS -
LPRT14.................................................... 134 XBVRD..................................................... 108 TENON MOUNT.......................................... 66
LPRT22.................................................... 134 XCHM3...................................................... 16 FLOOD LIGHTING BRACKETS.................... 67
LPRT22 SM.............................................. 135 XCHWM3................................................... 70 POLE BRACKETS/ACCESSORIES............... 69
LPRT24.................................................... 134 XCN3.......................................................... 36 SELECTION GUIDE FOR ROUND &
LPRT24 SM.............................................. 135 XENM3....................................................... 38 SQUARE POLES......................................... 60
LPRX........................................................ 183 XFLM....................................................... 100 STEEL ROUND POLES............................... 42
LSL2........................................................ 166 XGBM........................................................ 22 STEEL ROUND TAPERED POLES............... 46
LSL3........................................................ 165 STEEL SQUARE POLES.............................. 44
LSWL....................................................... 184 WINDSPEED MAP...................................... 61
The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.
LED Catalog Edition 3
Discover the best professional documents and content resources in AnyFlip Document Base.
Search