CarrLaneCatalog_2019ed-c.pdf

PUSH / PULL TOGGLE CLAMPS




















Sizes marked * are also available
in stainless steel




All Carr Lane Manufacturing toggle clamps are DFARS and RoHS compliant.


Standard SPC Design
pp. 500-505
Most popular series of push/pull clamps.
100 lbs* 300 lbs* 800 lbs 5000 lbs
Plunger advances and locks by moving
the handle forward toward it. Clamp
can also be used for pulling instead of
pushing (handle locks back in downward
position also). Choice of eight sizes.
150 lbs* 300 lbs 2500 lbs 16000 lbs

Horizontal Handle
p. 507
Reverse-action push clamp. Plunger
advances and locks by moving the handle
600 lbs backward into horizontal position.
PC Design
pp. 508-509
Durable push/pull clamps with nodular
iron bases. Plunger advances and locks
by moving the handle forward toward 11
it. Clamp can also be used for pulling
instead of pushing (handle locks back
500 lbs 850 lbs 1500 lbs in downward position also). Choice of
three sizes.

Threaded Body
pp. 510-511
Compact push/pull clamps for mounting
through panels, plates, or angle brackets.
Install in a drilled or tapped hole. Plunger
locks in either extended or retracted
position. Rotate clamp to position handle
200 lbs* 300 lbs* 700 lbs anywhere within 360°. Choice of three
sizes.








www.carrlane.com 8/18 | Carr Lane Manufacturing | 499

PUSH/PULL TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS

(3) HOLES 11/64 DIA
3/8 FOR #8 OR M4 SCREWS


1/4 DIA 5/8 1-1/16
100 lbs
Tapped Plunger 7/16 DIA
5/16 5/8
100 lbs 1-5/16
Externally Threaded
Plunger
TAPPED #8-32 1-25/32
X 1/2 DEEP
1/4
CL-50-SPC (Metric No. CLM-50-SPC) RADIUS 5/8
Miniature plunger clamp, perfect for electronics fixturing TRAVEL
and other light-duty applications. Locks in extended 1-5/16
or retracted position. 5/8" plunger travel. Tapped-
plunger version supplied with #8-32 nylon hex-head 5/8
spindle CL-832203-SA (M4 in metric). Also available with
1/4-20 externally threaded plunger. Shipping weight 0.2 lbs. 3/32 1-9/32 1-7/32
Holding capacity: 100 lbs
2-19/32



Also available Also available
in stainless steel . . . air powered . . .




CL-51-SPC
Externally Threaded CL-50-SPC-S CL-600-PPC
Plunger (INFO+ page 511)


PUSH/PULL TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS




Also available
in stainless steel . . .
11




CL-60-SPC-S
150 lbs
Tapped Plunger



CL-60-SPC (Metric No. CLM-60-SPC)
Heavier-duty version of our smallest plunger clamp
above. This is a powerful clamp in an extremely compact
size. Unique base allows bottom or side mounting. Locks
in extended or retracted position. 5/8” plunger travel.
Plunger is tapped to accept any #8-32 spindle (M4 in metric).
INFO+: See pages 536-539 to order. Shipping weight 0.2 lbs.
Holding capacity: 150 lbs



500 | Carr Lane Manufacturing Co. | 8/18 www.carrlane.com

PUSH/PULL TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS















300 lbs






CL-100-SPC (Metric No. CLM-100-SPC)
Tiny, yet extremely powerful plunger clamp with a forged steel
base. Requires very little mounting space due to its narrow Also available
base and compact low profile. Locks in extended or retracted in stainless steel . . .
position. 5/8” plunger travel. Plunger is tapped to accept any
1/4-20 spindle (M6 in metric). INFO+: See pages 536-539 to
order. Shipping weight 0.5 lbs.
Holding capacity: 300 lbs

CL-100-SPC-S



PUSH/PULL TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS











11

300 lbs
With Safety Lock




CL-100-LSPC (Metric No. CLM-100-LSPC)
Same as the toggle clamp shown above, except with our
unique safety-lock feature. This safety lock automatically Also available
engages when the clamp is closed, then remains locked until in stainless steel . . .
manually disengaged by pressing the lever before opening.
This prevents the clamp from being accidentally opened by
bumping the handle. Shipping weight 0.6 lbs.
Holding capacity: 300 lbs


CL-100-LSPC-S



www.carrlane.com 8/18 | Carr Lane Manufacturing | 501

PUSH/PULL TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS






300 lbs













CL-150-SPC (Metric No. CLM-150-SPC)
Medium-size plunger clamp that locks in extended or retracted
position. 1-1/4” plunger travel. Plunger is tapped to accept any
5/16-18 spindle (M8 in metric). INFO+: See pages 536-539 to
order. Shipping weight 0.7 lbs.
Holding capacity: 300 lbs









Modular Fixturing








• Ideal for temporary fixturing, for
one-time jobs, short or prototype
production runs, trial fixturing or
while permanent fixtures are built or
11
repaired
• Available in mini, standard and heavy
sizes
• Wide range of tooling plates
and blocks, finish ground, with
multipurpose positioning holes
• Order as components, or in handy
starter sets


See Modular Fixturing on pages 407-456







502 | Carr Lane Manufacturing Co. | 8/18 www.carrlane.com

PUSH/PULL TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS











800 lbs






CL-250-SPC (Metric No. CLM-250-SPC)
Heavier clamp with extra plunger height. Locks in extended or
retracted position. 1-5/8” plunger travel. Plunger is tapped to
accept any 3/8-16 spindle (M10 in metric). INFO+: See pages
536-539 to order. Shipping weight 1.9 lbs.
Holding capacity: 800 lbs












PUSH/PULL TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS





(4) HOLES 11/32 DIA
1-27/32
200 lbs 1-1/4 DIA FOR 5/16" OR M8 SCREWS
Self-Adjusting
Spring Force 3/4 DIA 1-5/8
2-1/4
11
5/16 1-5/8 21/32
2-1/4
5-3/4


CL-255-SPC
This toggle clamp is the same size as our CL-250-SPC above, and 1/4 1-5/8 MAX
features our patented self-adjusting spring-loaded plunger. .20" TRAVEL
The self-adjusting version applies a consistent spring clamping CLAMPING 4-9/16
force of 200 lbs (+/- 10%) anywhere within its .20” clamping RANGE
range. 1-5/8” maximum plunger travel. This version locks only
in the “push” direction, and cannot be tapped for a spindle. 1-3/4
Optionally available as reverse-acting with a horizontal handle.
Patent no. 6,905,116. Shipping weight 1.9 lbs.
Spring force (±10%): 200 lbs 1/4 3-7/8 2-9/16
6-3/4





www.carrlane.com 8/18 | Carr Lane Manufacturing | 503

PUSH/PULL TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS













2500 lbs





CL-350-SPC (Metric No. CLM-350-SPC)
Compact heavy-duty plunger clamp with an extremely low
profile. Rugged forged steel base. Locks in extended or
retracted position. 2” plunger travel. Plunger is tapped to
accept any 3/8-16 spindle (M10 in metric). INFO+: See pages
536-539 to order. Shipping weight 2.0 lbs.
Holding capacity: 2500 lbs






PUSH/PULL TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS














11
2500 lbs
With Safety Lock




CL-350-LSPC
Same as the toggle clamp shown above, except with our
unique safety-lock feature. This safety lock automatically
engages when the clamp is closed, then remains locked until
manually disengaged by pressing the lever before opening.
This prevents the clamp from being accidentally opened by
bumping the handle. Shipping weight 2.0 lbs.
Holding capacity: 2500 lbs







504 | Carr Lane Manufacturing Co. | 8/18 www.carrlane.com

PUSH/PULL TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS







(6) HOLES 13/32 DIA
FOR 3/8 OR M10 SCREWS
2-1/8

7/8 DIA 3
5000 lbs
11/16 3-9/16 3-9/16
8-1/2
CL-450-SPC (Metric No. CLM-450-SPC)
Extra-heavy-duty clamp features a full 4” plunger travel! Rugged 1/2-13 THREAD 7-3/4
nodular iron base and a 7/8”-diameter plunger combine to 51 DEEP
handle the toughest clamping jobs. Locks in extended or
retracted position. Plunger is tapped to accept any 1/2-13 4" TRAVEL
11/16
spindle (M12 in metric). INFO+: See pages 536-539 to order. RADIUS 9/16 4-13/16
Shipping weight 7.0 lbs.
Holding capacity: 5000 lbs 1-1/4
3/8
5-5/16 8
12-11/16







PUSH/PULL TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS











11




16000 lbs





CL-650-SPC (Metric No. CLM-650-SPC)
Strongest plunger clamp available. Handle and base are made
of alloy steel. Precision unit with snap-ring pivot pins to allow
removing the plunger even after the clamp is mounted. Locks
in extended or retracted position. 3” plunger travel. Plunger is
tapped to accept any 5/8-11 spindle (M16 in metric). INFO+:
See pages 536-539 to order. Shipping weight 5.7 lbs.
Holding capacity: 16000 lbs





www.carrlane.com 8/18 | Carr Lane Manufacturing | 505

The ONLY TOGGLE CLAMPS


EXCLUSIVELY MADE IN THE USA

























z 60 to 16,000 lbs.

holding capacity
z Horizontal,
vertical,

push/pull,
latch-action,

air-powered





Every stamped
Carr Lane Manufacturing
toggle clamp is proudly
made in the USA
11
— in St. Louis, MO,
by our skilled
Photo from Flying S Inc.
American workforce.




Look for the green handle
and choose Carr Lane Manufacturing!












506 See Pages 457-540

PUSH/PULL TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS



600 lbs














CL-275-SPC (Metric No. CLM-275-SPC)
Similar to CL-250-SPC except with reverse handle action. Plunger
advances and locks by moving handle backward into horizontal
position. 1-3/16” plunger travel. Plunger is tapped to accept any
3/8-16 spindle (M10 in metric). INFO+: See pages 536-539 to
order. Straight-base version supplied with separate base bracket
to allow mounting clamp at an angle. Shipping weight 1.5 lbs.
Holding capacity: 600 lbs




CL-276-SPC
Straight Base
with Bracket
Bracket included with CL-276-SPC

PUSH/PULL TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS

200 lbs Spring Force
Self-Adjusting Plunger
(4) HOLES 11/32 DIA
FOR 5/16" OR M8 SCREWS
1-5/8
1-7/8 2-1/4
3/4 DIA 1/2
11

1-1/16 DIA 1/4
5/16 1-5/8
2-1/4


CL-285-SPC
This reverse-action toggle clamp is the same size as our
CL-275-SPC above, and features our patented self-adjusting spring-
3/4
loaded plunger. Reverse action advances and locks the plunger .20" TRAVEL 7-1/16
by pivoting the handle backward into horizontal position. The CLAMPING 2-1/4
self-adjusting version applies a consistent spring clamping force RANGE
of 200 lbs (+/-10%) anywhere within its .20” clamping range. 1-3/4
1-3/16” maximum plunger travel. This version locks only in the
“push” direction, and cannot be tapped for a spindle. Patent no. 1/4 3-13-16 2-1/2
6,905,116. Shipping weight 1.5 lbs. 12-1/16
Spring force (±10%): 200 lbs




www.carrlane.com 8/18 | Carr Lane Manufacturing | 507

PUSH/PULL TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS







1500 lbs








850 lbs





500 lbs CL-100-PC








Durable plunger clamp with nodular iron base. Locks in either
extended or retracted position. Choice of three sizes.

CL-100-PC (Metric No. CLM-100-PC)
Small-size clamp with 1-3/16” plunger travel. Accepts any
5/16-18 spindle (M8 in metric). INFO+: See pages 536-539 to
order. Shipping weight 0.9 lbs.
Holding capacity: 500 lbs


CL-200-PC (Metric No. CLM-200-PC) CL-200-PC
Medium-size clamp with 1-5/8” plunger travel. Accepts any
3/8-16 spindle (M10 in metric). INFO+: See pages 536-539 to
order. Shipping weight 1.4 lbs.
Holding capacity: 850 lbs

11
CL-300-PC (Metric No. CLM-300-PC)
Large-size clamp with 2-11/32” plunger travel. Accepts any
1/2-13 spindle (M12 in metric). INFO+: See pages 536-539 to
order. Shipping weight 3.2 lbs.
Holding capacity: 1500 lbs



Also available air powered . . .







CL-1500-PPC
850 lbs
CL-300-PC
(INFO+ page 534)



508 | Carr Lane Manufacturing Co. | 8/18 www.carrlane.com

PUSH/PULL TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS





1500 lbs
With Safety Lock






850 lbs
With Safety Lock


CL-100-LPC

500 lbs
With Safety Lock





INFO+: Same as the toggle clamps shown on page 492, except
with our unique safety-lock feature. This safety lock automatically
engages when the clamp is closed, then remains locked until
manually disengaged by pressing the lever before opening. This
prevents the clamp from being accidentally opened by bumping
the handle.
Durable plunger clamp with nodular iron base. Locks in extended
or retracted position (safety lock functions only in extended
position). Choice of three sizes.
CL-100-LPC
Small-size clamp with 1-3/16” plunger travel. Accepts any 5/16-18
spindle. INFO+: See pages 536-539 to order. Shipping weight 0.9 lbs. CL-200-LPC
Holding capacity: 500 lbs

CL-200-LPC
Medium-size clamp with 1-5/8” plunger travel. Accepts any 3/8-16
spindle. INFO+: See pages 536-539 to order. Shipping weight 1.4 lbs.
11
Holding capacity: 850 lbs
CL-300-LPC
Large-size clamp with 2-11/32” plunger travel. Accepts any 1/2-13
spindle. INFO+: See pages 536-539 to order. Shipping weight 3.2 lbs.
Holding capacity: 1500 lbs











CL-300-LPC





www.carrlane.com 8/18 | Carr Lane Manufacturing | 509

PUSH/PULL TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS









700 lbs





300 lbs

CL-150-TPC

200 lbs







Compact plunger clamps for mounting through panels, plates,
or angle brackets. Install in a drilled or tapped hole, securing
with the locknut provided. Plunger locks in either extended or
retracted position. Rotate clamp to position handle anywhere
within 360°. Choice of three sizes.

CL-150-TPC (Metric No. CLM-150-TPC)
Small-size clamp with 3/4” plunger travel. Installs in a CL-250-TPC
5/8”-diameter drilled hole, or a 5/8-18 tapped hole (M16x1.5 in
metric). Accepts any 1/4-20 spindle (M6 in metric). INFO+: See
pages 536-539 to order. Shipping weight 0.4 lbs.
Holding capacity: 200 lbs

CL-250-TPC (Metric No. CLM-250-TPC)
Medium-size clamp with 1-1/2” plunger travel. Installs in a
3/4”-diameter drilled hole, or a 3/4-16 tapped hole (M20x1.5
in metric). Accepts any 5/16-18 spindle (M8 in metric). INFO+:
See pages 536-539 to order. Shipping weight 0.7 lbs.
Holding capacity: 300 lbs
CL-350-TPC (Metric No. CLM-350-TPC)
11
Large-size clamp with 2-5/8” plunger travel. Installs in a
1”-diameter drilled hole, or a 1”-14 (M27x2 in metric) tapped
hole. Accepts any 3/8-16 spindle (M10 in metric). INFO+: See
pages 536-539 to order. Shipping weight 1.5 lbs.
Holding capacity: 700 lbs
CL-350-TPC
Mounting Bracket for CL-250-TPC:

Also available in stainless steel . . .







CL-150-TPC-S CL-250-TPC-S CL-350-TPC-S
CL-250-TPCA 200 lbs 300 lbs 700 lbs



510 | Carr Lane Manufacturing Co. | 8/18 www.carrlane.com

PUSH/PULL TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS





200 lbs Spring Force
Self-Adjusting Plunger









100 lbs Spring Force
Self-Adjusting Plunger





These toggle clamps are the same size as our CL-250-TPC and
CL-350-TPC on the opposite page, and feature our patented self-
adjusting spring-loaded plunger. The self-adjusting version applies
a consistent spring clamping force anywhere within its clamping
range. This version locks only in the “push” direction, and cannot
be tapped for a spindle. Compact plunger clamps for mounting
through panels, plates, or angle brackets. Install in a drilled or
tapped hole, securing with the locknut provided. Rotate clamp
to position handle anywhere within 360°. Patent no. 6,905,116.
Choice of two sizes.
CL-255-TPC
CL-255-TPC
This medium-size self-adjusting clamp applies a consistent
spring clamping force of 100 lbs (+/-10%) anywhere within its
.20” clamping range. 1-1/2” maximum plunger travel. Installs in
a 3/4”-diameter drilled hole, or a 3/4-16 tapped hole. Shipping
weight 0.7 lbs.
Spring force (±10%): 100 lbs

CL-355-TPC
This large-size self-adjusting clamp applies a consistent spring
clamping force of 200 lbs (+/-10%) anywhere within its .20”
clamping range. 2-5/8” maximum plunger travel. Installs in a
1”-diameter drilled hole, or a 1”-14 tapped hole. Shipping weight
1.5 lbs. 11
Spring force (±10%): 200 lbs

Mounting Bracket for CL-255-TPC:





CL-355-TPC







CL-250-TPCA





www.carrlane.com 8/18 | Carr Lane Manufacturing | 511

TOGGLE EDGE CLAMPS













































All Carr Lane Manufacturing toggle clamps are DFARS and RoHS compliant.










Automatically Adjusting
p. 513
11
Unique Toggle Edge Clamp applies force
forward and downward at the same time.
This quick-acting, self-adjusting clamp
automatically compensates for variations
in workpiece size. Clamping force is always
consistent after setting once.

750 lbs
















512 | Carr Lane Manufacturing Co. | 8/18 www.carrlane.com

TOGGLE EDGE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS














750 lbs
Automatic Toggle Clamp Toggle Edge Clamps apply force forward and downward at the
(Self Adjusting) same time.




(4) HOLES 21/64 DIA
CL-550-ATEC FOR 5/16 OR M8 SCREWS
Unique Toggle Edge Clamp applies force forward and
downward at the same time. Automatically adjusts for 2-3/8
different workpiece sizes. Clamps with the same, repeatable 1-5/8 9/16 15/16
force anywhere within its 9/32” automatic-adjustment range.
Easy to use. Simply set desired clamping force once, after
mounting, then operate just like a standard toggle clamp. The 5/16 1-1/4
patented adjusting mechanism does the rest. For mounting 2-1/16
on T-slotted tables, see slotted adapters below.
Hardened clamping nose grips workpiece firmly to apply
downthrust force. Handle moves 80° while nose pivots back
for loading. Patent no. 4,407,493.
Shipping weight 1.8 lbs.
Holding capacity: 750 lbs
ADJUSTMENT
SCREW FOR
SETTING FORCE
VINYL GRIP
8-1/4
1-13/32 MAX
CLEARANCE HEIGHT
3-1/8
1-1/4 1-1/8
MAX MIN 5/8 11
5/16
1-23/32
1-15/16 7-11/16
9/32
9/32 MAX CLAMPING RANGE













9/32” Automatic-Adjustment Range





www.carrlane.com 8/18 | Carr Lane Manufacturing | 513

LATCH-ACTION TOGGLE CLAMPS






















Sizes marked * are also available in
stainless steel


All Carr Lane Manufacturing toggle clamps are DFARS and RoHS compliant.



Adjustable U Bolt
pp. 516-519
Latch-action clamp with a threaded U bolt
for adjustability. Supplied with matching
latch plate (smallest three sizes). Large,
comfortable handle grip. Available in five
sizes.
360 lbs* 700 lbs* 2000 lbs* 4000 lbs 7500 lbs



Right-Angle Adjustable U Bolt
p. 520
Similar to the latch clamp above, except
with its pulling direction perpendicular to
the base. Supplied with matching latch
plate. Large, comfortable handle grip.
Available in three sizes.
500 lbs* 1000 lbs* 2000 lbs*


Adjustable Hook
p. 515
11
Popular hook-type latch clamp. Hook is
threaded at one end for easy adjustment.
Base rotates 90° to allow horizontal or
vertical latching. Available in two sizes.
375 lbs* 1000 lbs


Fixed Length
p. 521
Latch clamp with fixed reach for
installation where no length adjustment is
required. Adjustable stop allows latching
at different heights. Available in two sizes.
375 lbs* 1200 lbs








514 | Carr Lane Manufacturing Co. | 8/18 www.carrlane.com

LATCH-ACTION TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS











1000 lbs






375 lbs







Latch clamp with a versatile hook for grasping a rod or rim. Hook
is threaded at one end to allow adjustment after mounting. Base
pivots to allow horizontal or vertical latching. Choice of two sizes.
Optional latch plate can be mounted as shown in the drawings, or
reversed, for mounting flexibility.
CL-250-PA
Medium-size latch clamp with a 4-inch drawing movement.
Threaded hook allows a 5/16-inch adjustment range. Shipping
weight 0.8 lbs. Order matching latch plate CL-250-PA-L separately CL-250-PA
(CL-250-PA-S-L in stainless).
Holding capacity: 375 lbs

CL-350-PA
Large-capacity latch clamp with 6-1/8-inch drawing movement.
Threaded hook allows a 3/4-inch adjustment range. Shipping
weight 2.5 lbs. Order matching latch plate CL-350-PA-L separately.
Holding capacity: 1000 lbs



11
CL-257-PA

Same as CL-250-PA except with a manual safety lock. Push knob in
to lock, pull knob out to unlock.
Holding capacity: 375 lbs


CL-350-PA
Also available in Extra hooks available . . .
stainless steel . . .




CL-251-PA CL-250-PA-S CL-250-PA-HOOK
Narrow Base CL-250-PA-S-HOOK
375 lbs CL-350-PA-HOOK



www.carrlane.com 8/18 | Carr Lane Manufacturing | 515

LATCH-ACTION TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS









2000 lbs





700 lbs





360 lbs
CL-100-PA


Versatile latch clamp with a threaded U bolt for adjustability.
Supplied with matching latch plate. Large, comfortable handle
grip. Available in three sizes (INFO+: See page 517 for two
larger sizes).
CL-100-PA

Miniature latch clamp with high holding capacity. 1-3/16-inch
drawing movement. Threaded U bolt allows a 25/64-inch
adjustment range. Shipping weight 0.2 lbs.
Holding capacity: 360 lbs
CL-200-PA
Medium-size latch clamp with 2-inch drawing movement.
Threaded U bolt allows a 3/8-inch adjustment range. Shipping
weight 0.4 lbs.
Holding capacity: 700 lbs
CL-300-PA CL-200-PA

Heavy-duty latch clamp. Well-suited for applications such as
plastic molding. 2-1/2-inch drawing movement. Threaded U
bolt allows a 15/16-inch adjustment range. Shipping weight
1.5 lbs.
11
Holding capacity: 2000 lbs








Also available in stainless steel. . .





CL-100-PA-S CL-200-PA-S CL-300-PA-S
360 lbs 700 lbs 2000 lbs


CL-300-PA



516 | Carr Lane Manufacturing Co. | 8/18 www.carrlane.com

LATCH-ACTION TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS
Optional
Latch Plate
CL-500-PAA



4000 lbs












CL-400-PA

INFO+: Heavier-duty version of the latch clamps on page 516.
Strong enough to resist the high expansion forces generated
in polyurethane molds. Rugged alloy steel base and latch plate
(order latch plate separately). Threaded U bolt allows a 3/4-
inch adjustment range. 2-7/16” drawing movement. Shipping
weight 2.8 lbs.
Holding capacity: 4000 lbs






LATCH-ACTION TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS

Optional
Latch Plate
CL-500-PAA
7500 lbs (8) HOLES 13/32 DIA FOR 3/8 OR M10 SCREWS
2-1/4
1-3/8 7/16 2-1/8 U-BOLT SPACING

3-1/8
3-1/8
2-1/4
11

CL-500-PA 9/16 2-1/4 2-1/4 HOLE SPACING
3-3/8
Strongest latch clamp available. Alloy steel handle provides 1-3/8 MIN DRAWING MOVEMENT
even greater strength than the CL-400-PA above, yet with a 1-1/8 1-1/2
ADJUSTMENT
more-compact overall size. Rugged alloy steel base and latch 1
plate (order latch plate separately). Threaded U bolt allows
a 1-1/8-inch adjustment range. 1-3/8” drawing movement. 1/2-13 THREAD 3-3/4
(1/2 DIA U-BOLT)
Ship ping weight 3.3 lbs.
Holding capacity: 7500 lbs
1-1/8
Also available in stainless steel... 7/16
1 MIN
OPTIONAL LATCH 3/8
CL-500-PA-S (Clamp) PLATE (ORDER 7-19/32
SEPARATELY) 8-11/16 MIN

CL-500-PAA-S (Latch Plate)




www.carrlane.com 8/18 | Carr Lane Manufacturing Co. | 517

LATCH-ACTION TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS






2000 lbs




700 lbs




360 lbs
CL-100-LPA





INFO+: Same as our latch clamps on page 514 except with safety-lock
feature. This safety lock automatically engages when the clamp is
closed, then remains locked until manually disengaged by pressing
the lever before opening. This prevents the latch clamp from being
accidentally opened by bumping the handle.
Versatile latch clamp with a threaded U bolt for adjustability.
Supplied with matching latch plate. Large, comfortable handle grip.
Available in two sizes (INFO+: also see page 517 for two larger sizes).


CL-100-LPA
Miniature latch action clamp with high holding capacity. 1-3/16-inch
drawing movement. Threaded U bolt allows a 25/64-inch adjustment
range. Shipping weight 0.2 lbs.
Holding capacity: 360 lbs
CL-200-LPA

CL-200-LPA
Medium-size latch clamp with 2-inch drawing movement. Threaded
U bolt allows a 3/8-inch adjustment range. Shipping weight 0.4 lbs.
Holding capacity: 700 lbs


CL-300-LPA
11
Heavy-duty latch clamp. Well-suited for applications such as plastic
molding. 2-1/2-inch drawing movement. Threaded U bolt allows a
15/16-inch adjustment range. Shipping weight 1.5 lbs.
Holding capacity: 2000 lbs



Also available in stainless steel. . .




CL-100-LPA-S CL-200-LPA-S CL-300-LPA-S
360 lbs 700 lbs 2000 lbs CL-300-LPA









518 | Carr Lane Manufacturing Co. | 8/18 www.carrlane.com

LATCH-ACTION TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS
Optional Safety Lock
Optional (Press lever to unlock)
Latch Plate
CL-500-PAA



4000 lbs
With Safety Lock








CL-400-LPA

INFO+: Same as our latch clamps on page 517 except with
our unique safety-lock feature. This safety lock automatically
engages when the clamp is closed, then remains locked until
manually disengaged by pressing the lever before opening.
This prevents the latch clamp from being accidentally opened
by bumping the handle. Rugged alloy steel base and latch
plate (order latch plate separately). Threaded U bolt allows
a 3/4-inch adjustment range. 2-7/16” drawing movement.
Shipping weight 2.8 lbs.
Holding capacity: 4000 lbs



LATCH-ACTION TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS
Optional
Latch Plate
CL-500-PAA (8) HOLES 13/32 DIA FOR 3/8 OR M10 SCREWS
2-1/4
1-3/8 7/16 2-1/8 U-BOLT
SPACING
3-1/8
3-1/8
2-1/4
7500 lbs
With Safety Lock
2-1/4 HOLE
9/16 2-1/4 SPACING
3-3/8 11
1-3/8 DRAWING MOVEMENT
1-1/8 1-1/2
ADJUSTMENT
1
1/2-13 THREAD
(1/2 DIA U-BOLT) 3-3/4
CL-500-LPA 1-1/8
7/16
INFO+: Same as our latch clamps on page 517 except with OPTIONAL LATCH 1 MIN LOCK
our unique safety-lock feature. This safety lock automatically PLATE (ORDER SEPARATELY) 7-19/32 3/8
engages when the clamp is closed, then remains locked until 8-11/16 MIN
manually disengaged by pressing the lever before opening.
This prevents the latch clamp from being accidentally opened
by bumping the handle. Rugged alloy steel base and latch Also available in stainless steel...
plate (order latch plate separately). Threaded U bolt allows
a 1-1/8-inch adjustment range. 1-3/8” drawing movement. CL-500-LPA-S (Clamp)
Ship ping weight 3.3 lbs.
Holding capacity: 7500 lbs

CL-500-PAA-S (Latch Plate)



www.carrlane.com 8/18 | Carr Lane Manufacturing Co. | 519

LATCH-ACTION TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS




2000 lbs

1000 lbs




500 lbs








CL-110-PA




INFO+: Similar to the adjustable-U-bolt latch clamps on page
516, except with their pulling direction perpendicular to the
base. Supplied with matching latch plate. Large, comfortable
handle grip. Available in three sizes.

CL-110-PA
Miniature latch clamp with high holding capacity. 1-1/2-
inch drawing movement. Threaded U bolt allows a 7/16-inch
adjustment range. Shipping weight 0.3 lbs.
Holding capacity: 500 lbs

CL-210-PA
Medium-size latch clamp with 2-1/16-inch drawing
movement. Threaded U bolt allows an 11/16-inch adjustment CL-210-PA
range. Shipping weight 0.6 lbs.
Holding capacity: 1000 lbs
CL-310-PA

Heavy-duty latch clamp. Well-suited for applications such as
11
plastic molding. 2-1/2-inch drawing movement. Threaded U
bolt allows an 1-1/8-inch adjustment range. Shipping weight
1.4 lbs.
Holding capacity: 2000 lbs




Also available in stainless steel. . .





CL-110-PA-S CL-210-PA-S CL-310-PA-S
500 lbs 1000 lbs 2000 lbs

CL-310-PA




520 | Carr Lane Manufacturing Co. | 8/18 www.carrlane.com

LATCH-ACTION TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS













1200 lbs








375 lbs



Latch clamp with fixed reach for installation where no length
adjustment is required. An adjustable stop allows latching at
different angles. Available in two sizes.


CL-150-PA
Medium-size clamp with 4-inch drawing movement. Shipping
weight 0.8 lbs.
Holding capacity: 375 lbs


CL-170-PA
Larger clamp with 3-3/8-inch drawing movement. Shipping
weight 1.2 lbs. CL-150-PA
Holding capacity: 1200 lbs







Also available in stainless steel...
11





CL-150-PA-S











CL-170-PA






www.carrlane.com 8/18 | Carr Lane Manufacturing Co. | 521

TOGGLE PLIERS






























Sizes marked * are also available in
stainless steel









All Carr Lane Manufacturing toggle clamps are DFARS and RoHS compliant.



Forged Toggle Pliers
pp. 523-525
Powerful forged steel toggle pliers.
Available in five sizes. Larger sizes feature
a quick-release lever for easy opening.
200 lbs 350 lbs 700 lbs 700 lbs 700 lbs





Permanently Attached
11
p. 526
Handy weld-on/bolt-on clamp for holding
down lids, covers etc. Clamping jaw opens
a full 90° for extra clearance.

800 lbs*




Toggle Bar Clamps
p. 526
Multi-purpose bar clamp, with forged steel
clamping jaw. Order with optional lower
jaw, or attach bar by welding.
800 lbs






522 | Carr Lane Manufacturing Co. | 8/18 www.carrlane.com

TOGGLE PLIERS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS





200 lbs






CL-50-PL
Tiny-yet-powerful toggle pliers made of forged steel. 1-inch
jaw width. Supplied with 1/4-20 vinyl-coated hex-head
spindle CL-14208-SA. Optionally available as CL-50-PL-2 with
a bottom-jaw cushion, or as CL-50-PL-3 with (2) vinyl-coated
hex-head spindles, CL-14100-SA. Shipping weight 0.4 lbs.
Holding capacity: 200 lbs








CL-50-PL-2 CL-50-PL-3
Hex-Head Spindle Dual Hex-Head Spindle
and Bottom Cushion



TOGGLE PLIERS

INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS








350 lbs


11



CL-150-PL
Medium-size toggle pliers made of forged steel. 1-1/4-inch jaw
width. Supplied with 5/16-18 hex-head spindle CL-516212-SA.
Shipping weight 0.5 lbs.
Holding capacity: 350 lbs















www.carrlane.com 8/18 | Carr Lane Manufacturing Co. | 523

TOGGLE PLIERS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS

















700 lbs



CL-254-PL

Heavy-duty toggle pliers made of forged steel. 1-3/4 inch jaw
width. Two-way quick-release lever for easy opening. Supplied
with 3/8-16 swivel-foot spindle CL-38314-SF. Optionally
available as CL-250-PL with hex-head spindle CL-38314-SA,
as CL-254-PL-2 with (2) hex-head spindles CL-38314-SA, or as
CL-252-PL with flat-cushion spindle CL-38314-FC. Shipping
weight 1.3 lbs.
Holding capacity: 700 Lbs




















11




CL-250-PL CL-252-PL CL-254-PL-2
Hex-Head Spindle Flat Cushion Spindle Dual Hex-Head Spindle



















524 | Carr Lane Manufacturing Co. | 8/18 www.carrlane.com

TOGGLE PLIERS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS











700 lbs


CL-454-PL

Wide-jaw heavy-duty toggle pliers made of forged
steel. 3-inch jaw width. Two-way quick-release lever
for easy opening. Supplied with 3/8-16 swivel-
foot spindle CL-38314-SF and hex-head spindle
CL-38314-SA. Optionally available as CL-450-PL with single
hex-head spindle CL-38314-SA, or as CL-452-PL with a single
flat-cushion spindle CL-38314-FC. Shipping weight 1.4 lbs.
Holding capacity: 700 lbs






CL-450-PL CL-452-PL
Hex-Head Spindle Flat-Cushion Spindle

TOGGLE PLIERS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS










11



700 lbs





CL-550-PL

Extra-wide-jaw heavy-duty toggle pliers made of forged steel.
4-1/4-inch jaw width. Two-way quick-release lever for easy
opening. Supplied with (2) 3/8-16 hex-head spindles CL-38314-
SA. Shipping weight 1.6 lbs.
Holding capacity: 700 lbs






www.carrlane.com 8/18 | Carr Lane Manufacturing Co. | 525

TOGGLE PLIERS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS















800 lbs
Stainless






CL-325-PL-S

Handy weld-on/bolt-on stainless steel clamp for holding down
lids, covers, etc. Clamping jaw opens a full 90° for extra
clearance, while handle moves 50°. Supplied with 1/2-13
stainless hex-head spindle CL-12234-SA-S. Shipping weight
1.0 lbs.
Holding capacity: 800 lbs


TOGGLE PLIERS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS












11






800 lbs




CL-345-PL
Optional lower jaw . . .
Multi-purpose bar clamp with forged steel clamping jaw. Order
with optional lower jaw CL-345-PLA, or attach bar by welding.
Jaw opens 84° while handle moves 60°. Supplied with 3/8-16
swivel-foot spindle CL-38314-SF. Shipping weight 2.7 lbs.
Holding capacity: 800 lbs

CL-345-PLA


526 | Carr Lane Manufacturing Co. | 8/18 www.carrlane.com

AIR-POWERED CLAMPS









FILTER/REGULATOR/LUBRICATOR - CLR-100-FRL

4-WAY AIR VALVE
SHOP AIR CL-14-PCAV
SUPPLY





(2) SILENCERS
CL-14-PCEM
CHECK VALVE - CLR-224-ACV




All Carr Lane Manufacturing toggle clamps are DFARS and RoHS compliant.

Toggle Hold-Down Clamps
pp. 528-532
Similar to a vertical-handle hold-down
clamp, except linkage is operated by a
double-acting air cylinder instead of by
hand. Toggle linkage provides high holding
capacity and insures positive mechanical
100 lbs 200 lbs 500 lbs 1000 lbs 5000 lbs
locking even if air pressure fails.



Toggle Push Clamps
pp. 533-534
Similar to a manual plunger clamp, except
linkage is operated by a double-acting air
cylinder instead of by hand. Toggle linkage
100 lbs 850 lbs provides high holding capacity and insures
positive mechanical locking even if air
pressure fails.



Swing Clamps 11
pp. 640-641
Hold-down clamp with a clamping arm
that rotates 90° for clear loading. Sturdy
helical-cam mechanism first rotates arm,
then clamps down. Double acting.
14 lbs 25 lbs 66 lbs 100 lbs 165 lbs 277 lbs





Air Accessories
p. 535
Complete selection of accessories including
Clamping Check Exhaust Air clamping valves, check valves, exhaust
mufflers, and air fittings.
Valves Valves Mufflers Fittings






www.carrlane.com 8/18 | Carr Lane Manufacturing Co. | 527

AIR-POWERED TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS





















100 lbs



CL-400-PTC

Super-compact hold-down clamp for applications where space is
at a premium. Open arm allows spindle adjustment. Toggle linkage
provides high holding capacity and insures positive mechanical locking
even if air pressure fails. Arm opens 100°. 3/4”-bore double-acting air
cylinder with #10-32 ports (INFO+: see page 535 to order fittings).
Supplied with #10-32 flat-cushion spindle CL-316112-FC and (2)
CL-3166-TW flanged washers. 100-psi maximum input air pressure.
Shipping weight 0.8 lbs. An optional bracket for side mounting is also
available (CL-400-PCBR).
Holding capacity: 100 lbs
Clamping force at 100 psi, at center of arm: 100 lbs

Also available with position sensing...

(4) HOLES 11/64 DIA
FOR #8 OR M4 SCREWS
15/16 7/32
(2) #10-32
PORTS

11/16
Please see our web catalog for more information. 3/16 29/32
11
5/8
3/8
15/16
1-7/8
(4) HOLES 11/64 DIA
FOR #8 OR M4 SCREWS
5/16
5/8 23/32 7/8
7/8 1-11/16
5/8 3/32 1 1 2-11/32
#10-32 FLAT 1-29/32
CUSHION 3
SPINDLE 4-1/4
OPTIONAL MOUNTING BRACKET
CL-400-PCBR
(ORDER SEPARATELY)








528 | Carr Lane Manufacturing Co. | 8/18 www.carrlane.com

AIR-POWERED TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS



















200 lbs




CL-500-PTC Also available with position sensing:
Small-yet-powerful hold-down clamp with a long open arm.
Toggle linkage provides high holding capacity and insures
positive mechanical locking even if air pressure fails. Arm
opens 100°. 1-1/4”-bore double-acting air cylinder with
1/8-NPT ports. Accepts any 1/4-20 short spindle and (2)
CL-148-TW flanged washers. INFO+: See pages 536-540 to order. Please see our web catalog for more information.
100-psi maximum input air pressure. Shipping weight 2.5 lbs.
Holding capacity: 200 lbs
Clamping force at 100 psi, at center of arm: 200 lbs

















11


























www.carrlane.com 8/18 | Carr Lane Manufacturing Co. | 529

AIR-POWERED TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS




500 lbs
Open Arm







500 lbs
Solid Arm









CL-1000-PTC

CL-1001-PTC
Also available with position sensing:
Popular medium-size hold-down clamp available with a solid arm, or an
open arm for spindle adjustment. Toggle linkage provides high holding
capacity and insures positive mechanical locking even if air pressure
fails. Arm opens 92°. 1-1/4”-bore double-acting air cylinder with 1/8-
NPT ports. Accepts any 5/16-18 short spindle and (2) CL-51610-TW flanged
washers. INFO+: See pages 536-540 to order. Solid-arm version accepts Please see our web catalog for more information.
a CL-518000-BR bolt retainer. 100-psi maximum input air pressure.
Shipping weight 3.0 lbs.
Holding capacity: 500 lbs
Clamping force at 100 psi, at center of arm: 390 lbs







(4) HOLES 9/32 DIA
3-3/8 FOR 1/4" OR M6 SCREWS
1/8
9/32
21/64
11
1-5/16
1-1/4
DIA
1/8 I B P
7/16 3/4 1/8" NPT PORTS
1-3/4
DIA
3-1/16
5/8
2-1/16
1-3/8 I B P 1-3/16
1-5/32 2-1/4
3-5/8 I B P
2-25/32
3-19/32 3-1/8
10-1/4





530 | Carr Lane Manufacturing Co. | 8/18 www.carrlane.com

AIR-POWERED TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS






1000 lbs
Open Arm











1000 lbs
Solid Arm







Also available with position sensing:
CL-2000-PTC Open Arm

CL-2001-PTC Solid Arm
Extra-large hold-down clamp available with a solid arm, or an
open arm for spindle adjustment. Toggle linkage provides high
holding capacity and insures positive mechanical locking even Please see our web catalog for more information.
if air pressure fails. Arm opens 83°. 1-3/4”-bore double-acting
air cylinder with 1/4-NPT ports. Accepts any 1/2-13 spindle and
(2) CL-1213-TW flanged washers. INFO+: See pages 536-540 to
order. Solid-arm version accepts a CL-113000-BR bolt retainer.
100 psi maximum input air pressure. Shipping weight 6.0 lbs.
Holding capacity: 1000 lbs
Clamping force at 100 psi, at center of arm 680 lbs







11


























www.carrlane.com 8/18 | Carr Lane Manufacturing Co. | 531

AIR-POWERED TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS










5000 lbs















CL-3000-PTC

Heavy-duty hold-down clamp with a solid forged steel
clamping arm. Toggle linkage provides high holding capacity
and insures positive mechanical locking even if air pressure
fails. Arm opens 83°. 2-1/2”-bore double-acting air cylinder
with 1/4-NPT ports. 150-psi maximum input air pressure.
Shipping weight 15.0 lbs.
Holding capacity: 5000 lbs
Clamping force at 100 psi, at center of arm: 1600 lbs
















11


























532 | Carr Lane Manufacturing Co. | 8/18 www.carrlane.com

AIR-POWERED TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS







100 lbs


















CL-600-PPC
Super-compact plunger clamp. Toggle linkage provides high
holding capacity and insures positive mechanical locking even
if air pressure fails. 7/16” plunger travel. 3/4”-bore double-
acting air cylinder with #10-32 ports (INFO+: see page 535 to Also available with position sensing...
order fittings). Supplied with #8-32 nylon hex-head spindle
CL-832203-SA. 100-psi maximum input air pressure. Shipping
weight 0.8 lbs. An optional bracket for side mounting is also
available (CL-400-PCBR).
Holding capacity: 100 lbs
Clamping force at 100 psi 100 lbs
Please see our web catalog for more information.





(3) HOLES 11/64 DIA
1/4 1-1/4 FOR #8 OR M4 SCREWS
DIA 3/8

1-5/16 29/32
5/8 5/16 11
8-32 THREAD 5/8
1/2 DEEP #10-32 PORTS
7/16
7/16 TRAVEL
DIA
15/16
15/32 5/16 1-29/32
23/32 15/16
1/2
1-7/32 1-11/16
1-29/32
1-1/4 2-23/32
(3) HOLES 11/64 DIA 3-3/8
FOR #8 OR M4 SCREWS 4-15/16
OPTIONAL MOUNTING BRACKET
CL-400-PCBR
(ORDER SEPARATELY)








www.carrlane.com 8/18 | Carr Lane Manufacturing Co. | 533

AIR-POWERED TOGGLE CLAMPS


INFO+: SEE PAGE 458 FOR MATERIAL SPECIFICATIONS







850 lbs














CL-1500-PPC Also available with position sensing:

Larger-size plunger clamp. Toggle linkage provides high
holding capacity and insures positive mechanical locking
even if air pressure fails. 1” plunger travel. 1-1/4”-bore
double-acting air cylinder with 1/8-NPT ports. Accepts any
3/8-16 spindle. INFO+: See pages 536-539 to order. 100-psi
maximum input air pressure. Shipping weight 3.2 lbs.
Holding capacity: 850 lbs Please see our web catalog for more information.
Clamping force at 100 psi: 430 lbs








(4) HOLES 11/32 DIA
3 FOR 5/16 OR M8 SCREWS
1-5/16 1/8
5/8 29/32
DIA DIA
1-5/16
1-5/8
DIA
I B P
5/16 1/8 NPT PORTS
11
1-5/8
1-3/4
DIA
1 3/8-16 THREAD
TRAVEL 1-1/8 DEEP 3-3/32
2-3/16
1-3/8 1-3/8
I B P
2-1/2 2-5/8
I B P
3 5-1/16 3-1/8
5-3/8
11-9/16









534 | Carr Lane Manufacturing Co. | 8/18 www.carrlane.com

CLAMPING VALVES* CHECK VALVES*













CLR-224-ACV
Allows air to flow in one direction
only. 1/4-NPT male x 2.



EXHAUST MUFFLERS*













CL-14-PCAV
Versatile two-position, four-way valve for simple and CL-14-PCEM
convenient clamp control. Five 1/4-NPT ports. 150 psi Durable, compact, sintered-bronze
maximum pressure. exhaust muffler. 1/4-NPT male.


AIR FITTINGS*




Quick-Disconnect Coupler Adapter Hex Nipple Coupling Tubing Connector





CL-14-PCQD CL-1014-PCA CL-10-PCHN CL-1810-PCTC
Both halves, 1/4-NPT female #10-32 female x 1/4-NPT male #10-32 male x 2 CL-10-PCCP 1/8-OD tube x #10-32 male
CL-14-PCQDS CL-1418-PCA CL-14-PCHN #10-32 female x 2 CL-14-PCTC
Female socket, 1/4-NPT female 1/4-NPT female x 1/8-NPT male 1/4-NPT male x 2 CL-14-PCCP 1/4-OD tube x 1/4-NPT male
CL-14-PCQDP CL-3814-PCA CL-38-PCHN 1/4-NPT female x 2 (Includes compression
11
Male plug, 1/4-NPT female 3/8-NPT female x 1/4-NPT male 3/8-NPT male x 2 sleeve and nut)
(Industrial Interchange) CL-3814-PCHN
3/8-NPT male x 1/4-NPT male
Street Elbow Banjo Elbow Tee Branch Tee Cross








CL-10-PCBE CL-10-PCTE
#10-32 female x #10-32 male #10-32 female x 3 CL-10-PCBT CL-14-PCCR
CL-14-PCTE #10-32 female x 2, 1/4-NPT female x 4
CL-14-PCSE 1/4-NPT female x 3 #10-32 male
1/4-NPT
Female x 1/4-NPT male
* Do not use in high-pressure hydraulic lines.




www.carrlane.com 8/18 | Carr Lane Manufacturing Co. | 535

HEX-HEAD SPINDLES





STEEL (INCH)


PART NO. A B C D
CL-316112-SA #10-32 1-3/8 5/16 1/8
CL-14112-SA 1/4-20 1-11/16 7/16 3/16
CL-14200-SA 2-3/16
CL-516212-SA 5/16-18 2-11/16 1/2 3/16
CL-38314-SA 3/8-16 3-1/4 9/16 1/4
CL-12314-SA 1/2-13 3-5/16 3/4 5/16
CL-58438-SA 5/8-11 4-3/8 15/16 3/8
VINYL-DIPPED STEEL (INCH)
CL-832208-FC #8-32 1-3/16 1/4 1/8
CL-14100-SA 1
1/4-20 7/16 3/16
CL-14208-SA 1-1/2
STAINLESS STEEL (INCH)
CL-83234-SA-S 7/8
#8-32 1/4 1/8
CL-832203-SA-S 1-1/8
CL-316100-SA-S #10-32 1-1/8 5/16 1/8
CL-14112-SA-S 1/4-20 1-11/16 7/16 3/16
CL-516200-SA-S 5/16-18 1-15/16 1/2 3/16
CL-516212-SA-S 2-11/16
CL-38212-SA-S 3/8-16 2-1/2 9/16 1/4
CL-38314-SA-S 3-1/4
CL-12234-SA-S 1/2-13 2-13/16 3/4 5/16
NYLON (INCH)
CL-832203-SA #8-32 7/8 1/4 1/8



Simple spindle design provides maximum STEEL (METRIC)
clamping force. Fully threaded for maximum
adjustment range. Assembly includes two jam
nuts. Available in thread sizes from #8-32 to 5/8-11 PART NO. A B C D
(M4 to M16 in metric). CLM-530-SA M5 1.32 8mm .14
CLM-640-SA 1.75
M6 10mm .18
CLM-650-SA 2.15
CLM-850-SA 2.19
M8 13mm .22
CLM-865-SA 2.78
CLM-1070-SA M10 3.03 17mm .28
CLM-1275-SA M12 3.27 19mm .31
CLM-16100-SA M16 4.33 24mm .39
C HEX.
STAINLESS STEEL (METRIC)
11
A THREAD
CLM-416-SA-S M4 .75 7mm .12
CLM-425-SA-S 1.10
CLM-530-SA-S M5 1.32 8mm .14
D CLM-640-SA-S 1.75
B M6 10mm .18
CLM-650-SA-S 2.15
CLM-850-SA-S 2.19
M8 13mm .22
CLM-865-SA-S 2.78
CLM-1070-SA-S M10 3.03 17mm .28
NYLON (METRIC)
CLM-416-SA M4 .75 7mm .12











536 | Carr Lane Manufacturing Co. | 8/18 www.carrlane.com

FLAT-CUSHION SPINDLES





This is the standard spindle supplied with most clamps.
Molded neoprene tip provides medium clamping force with
some compensation for part-size variation. Also provides STEEL (INCH)
scratchfree clamping. Neoprene cushion has a durometer
hardness of 70 shore A, and an operating temperature range
of -40ºF to 220ºF. Spindle is fully threaded for maximum C
adjustment range. Assembly includes two jam nuts. PART NO. A B DIA D E
CL-316112-FC #10-32 1-3/8 9/16 7/16 7/16
CL-14112-FC 1-5/8
1/4-20 5/8 13/32 5/8
CL-14200-FC 2-1/8
CL-518208-FC 2-1/4
5/16-18 3/4 1/2 3/4
CL-516212-FC 3
CL-38212-FC 3/8-16 2-1/2 13/16 5/8 7/8
CL-38314-FC 3-1/2



FLAT-CUSHION SPINDLES, QUICK ADJUSTING





Same as the Flat-Cushion Spindles above, except with two
knurled nuts, instead of hex jam nuts, for convenient hand
tightening. Use for quick spindle adjustment in applications STEEL (INCH)
where high-torque tightening with a wrench is not required.
C
PART NO. A B DIA D E
CL-316112-FCQA #10-32 1-3/8 9/16 7/16 7/16
CL-14112-FCQA 1-5/8
1/4-20 5/8 13/32 5/8
CL-14200-FCQA 2-1/8
CL-518208-FCQA 2-1/4
5/16-18 3/4 1/2 3/4
CL-516212-FCQA 3
CL-38212-FCQA 3/8-16 2-1/2 13/16 5/8 7/8
CL-38314-FCQA 3-1/2




POLYURETHANE FLAT CUSHIONS

11



STAINLESS (INCH)

A THREAD
B DEEP C G
Polyurethane cushions are tougher and G PART NO. A B DIA D E F DIA
slightly harder than standard neoprene DIA CL-1032-FCP #10-32 .19 .56 .44 .53 .14 .32
cushions. Ideal when greater clamping force CL-1420-FCP 1/4-20 .30 .63 .47 .63 .22 .38
is required while still providing scratchfree F CL-51618-FCP 5/16-18 .33 .75 .50 .75 .21 .46
clamping and some compensation for part- CL-3816-FCP 3/8-16 .38 .81 .63 .88 .21 .52
size variation. Molded-in stainless steel E
insert provides superior thread strength. STAINLESS (METRIC)
Ideal for making custom-length Flat STAINLESS CLM-5-FCP M5 .19 .56 .44 .53 .14 .32
Cushion Spindles by inserting a threaded D STEEL CLM-6-FCP M6 .24 .63 .47 .63 .22 .38
INSERT
stud. Polyurethane cushion has a hardness DIA CLM-8-FCP M8 .30 .75 .50 .75 .21 .46
85 Shore A, operating temperature range C
-90ºF to 200ºF. DIA CLM-10-FCP M10 .35 .81 .63 .88 .21 .52



www.carrlane.com 8/18 | Carr Lane Manufacturing Co. | 537

CONE-CUSHION SPINDLES





Excellent for clamping into drilled holes, slots, or corners. STEEL (INCH)
Molded neoprene tip provides medium clamping force with
some compensation for part-size variation. Also provides C
scratchfree clamping. Neoprene cushion has a durometer PART NO. A B DIA D
hardness of 70 shore A, and an operating temperature range CL-316112-CC #10-32 1-3/8 9/16 7/16
of -40ºF to 220ºF. Spindle is fully threaded for maximum
adjustment range. Assembly includes two jam nuts. CL-14112-CC 1/4-20 1-5/8 5/8 5/8
CL-14200-CC 2-1/8 5/8
A THREAD CL-516212-CC 5/16-18 3 3/4 3/4
C DIA CL-38314-CC 3/8-16 3-1/2 13/16 7/8
70˚

D
B




SWIVEL-FOOT SPINDLES




Swivel foot provides full contact on uneven or sloped surfaces. STEEL (INCH)
Assembly includes two jam nuts.
C
PART NO. A B DIA D
CL-14112-SF 1/4-20 1-3/4 1/2 3/8
CL-14200-SF 2-1/4
CL-516212-SF 5/16-18 2-3/4 9/16 7/16
CL-38314-SF 3/8-16 3-1/2 5/8 1/2











SWIVEL SCREW CLAMPS


STEEL (INCH)
JAM NUT
11
PART NO. D
Screw clamp with patented removable, PART NO. (2 REQD) A B C DIA E
interchangeable swivel foot, available in many sizes CL-23-SSC CL-4-JN 1/4-20 1-19/32 23/64 3/8 1/8
and varieties. Add “N” to part no. for Delrin® foot, CL-27-SSC CL-5-JN 5/16-18 2-3/32 27/64 1/2 5/32
e.g. CL-23-SSCN. INFO+: See pages 118-119 for CL-43-SSC CL-6-JN 3/8-16 3-1/8 1/2 9/16 3/16
additional lengths and foot options. Order two jam CL-44-SSC CL-8-JN 1/2-13 4-1/16 17/32 3/4 3/16
nuts separately.
CL-46-SSC CL-10-JN 5/8-11 5-3/64 21/32 15/16 7/32
STEEL (METRIC)
CLM-23-SSC CLM-6-JN M6 1.67 .36 3/8 1/8
A (THD.)
CLM-27-SSC CLM-8-JN M8 2.06 .42 1/2 5/32
CLM-32-SSC CLM-10-JN M10 3.08 .62 9/16 3/16
D 20˚
SWIVEL CLM-36-SSC CLM-12-JN M12 4.00 .53 3/4 3/16
E CLM-40-SSC CLM-16-JN M16 4.97 .66 15/16 7/32
C
B STAINLESS STEEL (INCH)
CL-23-SSC-S CL-4-JN-S 1/4-20 1-19/32 23/64 3/8 1/8
CL-27-SSC-S CL-5-JN-S 5/16-18 2-3/32 27/64 1/2 5/32
CL-43-SSC-S CL-6-JN-S 3/8-16 3-1/8 1/2 9/16 3/16




538 | Carr Lane Manufacturing Co. | 8/18 www.carrlane.com

SPRING-LOADED SPINDLES




Clamps with strong spring force to compensate for
varying part thicknesses. Excellent for clamping
castings that vary slightly in size. To install, weld bolt
retainer to clamping arm. Assembly includes two jam
nuts, a die spring, and a bolt retainer. STEEL (INCH)
FORCE
D AT “E”
PART NO. A B C MIN MAX E (lbs) F
CL-14200-SL 1/4-20 2-1/4 7/16 1-9/32 1-3/8 1/4 50 5/8
CL-516212-SL 5/16-18 2-3/4 1/2 1-11/16 1-7/8 1/4 100 5/8
CL-38314-SL 3/8-16 3-1/2 9/16 1-3/4 2-9/32 5/16 200 7/8












One-Touch Swing Clamps








Quick Acting, Simple And Cost Effective








• Simply rotate the clamp into position, then
clamp down in one continuous motion

• Available in four sizes each of three styles:
horizontal cam, vertical cam, or hex drive
11




















See Pages 293-295




www.carrlane.com 8/18 | Carr Lane Manufacturing Co. | 539

FLANGED WASHERS


STEEL
C
PART NO. A B DIA
For open-arm clamps. Use two flanged washers to CL-832-TW #8-32 or M4 7/16 15/32
mount spindle, one above the arm and one below. CL-3166-TW #10-32 or M5 1/2 9/16
CL-147-TW 1/4-20 or M6 9/16 5/8
A DIA BOLT CL-148-TW 19/32 11/16
Two flanged washers IBP CL-51610-TW 5/16-18 or M8 3/4 7/8
required per clamp CL-3811-TW 3/8-16 or M10 15/16 1
IBP
CL-1213-TW 1/2-13 or M12 1-5/32 1-1/4
B
CL-5811-TW 5/8-11or M16 1-3/8 1-15/32
STAINLESS STEEL
C DIA CL-832-TW-S #8-32 or M4 7/16 15/32
CL-3166-TW-S #10-32 or M5 1/2 9/16
CL-147-TW-S 9/16 5/8
1/4-20 or M6
CL-148-TW-S 19/32 11/16
CL-51610-TW-S 5/16-18 or M8 3/4 7/8
CL-3811-TW-S 3/8-16 or M10 15/16 1
BOLT RETAINERS




IBP BR (FOR HTC & VTC CLAMPS)
E
SPINDLE A
A DIA PART NO. SIZE DIA B C D E
D CL-142000-BR 1/4-20 or M6 9/32 1-1/4 1/2 3/16 3/32
IBP
CL-518000-BR 5/16-18 or M8 21/64 1-1/4 5/8 1/4 3/32
CL-316000-BR 3/8-16 or M10 17/32 1-1/2 3/4 5/16 1/8
C
CL-113000-BR 1/2-13 or M12 9/16 1-5/8 7/8 3/8 1/8
BR S CL-511000-BR 5/8-11 or M16 11/16 1-7/8 1-1/4 3/8 1/8
For VTC clamps For TC clamps B
S (FOR TC CLAMPS)
IBP
SPINDLE A B
For solid-arm clamps. Weld on bolt retainer at B PART NO. SIZE DIA DIA C
desired arm length and spindle angle. CL-1458-S 1/4-20 or M6 .257 5/8 5/8
CL-51658-S 5/16-18 or M8 .316 5/8 5/8
C
A DIA DRILL
CL-3878-S 3/8-16 or M10 .397 3/4 7/8


MOUNTING BRACKETS

11

(4) HOLES 11/64 DIA
FOR #8 OR M4 SCREWS

5/8
5/16
Downholding Push/Pull
IBP
5/8
IBP
15/16 5/16
15/32
Handy bracket for side-mounting small FITS FITS
clamps. One reversible bracket fits DOWNHOLDING PUSH
several clamps. 1/2 PART NO. CLAMPS CLAMPS
CL-150-VTC CL-50-SPC
CL-400-PCBR
CL-400-PTC CL-600-PPC
(3) HOLES 11/64 DIA
FOR #8 OR M4 SCREWS


540 | Carr Lane Manufacturing Co. | 8/18 www.carrlane.com

STAGE AND FILM





















Glow Wagon Brakes Push/Pull Toggle Clamps Lifting Pins Ball Lock Pins
p. 542 pp. 499-511 pp. 58-59 pp. 42-59
















Hoist Rings Threaded Inserts Hi-Viz Hammers
pp. 73-92 pp. 335-341 p. 333



















12




















www.carrlane.com 8/18 | Carr Lane Manufacturing Co. | 541

GLOW WAGON BRAKES


CLAMP BODY: 12L14, 1008, 1010, AND/OR 1018 STEEL, ZINC PLATED BLACK CHROMATE
RIVETS: 400-SERIES STAINLESS
HANDLE: GLOW-IN-THE-DARK VINYL























Medium-sized clamp locks in
extended or retracted position.


CL-150-SPC-BZ

Wagon Brakes with a black finish and glow-in-the-dark handles are
specifically designed for use on stage-set designs, but can be used
with other mobile jigs and carts. Wagon Brakes provide secure
stabilization of your set designs, the ability to effortlessly re-arrange
sets in an instant, and safety for your crew with special handles that
glow in the dark for at least 8 hours. Glow-in-the-dark handles reduce
the worry of trip hazards for stagehands as they work to set the scene.
Wagon Brakes literally lift your scenery off its movable casters,
securing it in place and preventing any movement until you are ready
to change the scene. A rugged toggle action provides the mechanical
advantage to make lifting easy, and locks “over center” for safety. No
drilling is ever required on your stage floor – just lock these Wagon
Brakes in place to secure your stage set underneath the actors’ feet.
The medium-size plunger clamp shown here (CL-150-SPC-BZ) has
a 1-1/4” plunger travel, is tapped to accept any 5/16-18 threaded
foot and has a 300 lbs holding capacity. CL-250-SPC-BZ has a 1-5/8”
plunger travel, is tapped to accept any 3/8-16 threaded foot and has
an 800 pound holding capacity. Both lock in extended and retracted
position. Made in USA.

CL-250-SPC-BZ

12


PART NO. DESCRIPTION TAPPED HOLE IN PLUNGER HOLDING CAPACITY SHIPPING WEIGHT
CL-150-SPC-BZ Tapped Plunger, Flanged Base 5/16-18 300 lbs. .7 lbs.
CL-250-SPC-BZ Tapped Plunger, Flanged Base 3/8-16 800 lbs. 1.9 lbs.














542 | Carr Lane Manufacturing Co. | 8/18 www.carrlane.com

PRECISION DRILL JIG BUSHINGS




































































13















www.carrlane.com 8/18 | Carr Lane Manufacturing Co. | 543

WHAT MAKES A CARR LANE MANUFACTURING
DRILL BUSHING BETTER?









1 Carr Lane Manufacturing drill
bushings are all precision honed and
ground, the finest quality available.
TOP They exceed all ANSI drill-bushing
standards. Unlike some of our
competitors, we manufacture only
QUALITY first-quality drill bushings, never
“economy grade.”












2 Our nationwide network of stocking
distributors, plus huge inventories at
two warehouse locations, guarantees
same-day shipment for standard
FAST bushings. In addition, our quick-
response manufacturing capabilities
allow us to ship almost all special and
DELIVERY modified bushings in less than 10
days.

Main Factory
Drill Bushing Factory and Warehouse
Austin, Texas St. Louis, Missouri










PRICES $ As you expect with all Carr Lane
3

Manufacturing products, our
drill-bushing prices are the
ECONOMICAL most competitive around. Our
13 production volumes and advanced
manufacturing techniques mean
excellent value for you.













544 | Carr Lane Manufacturing Co. | 8/18 www.carrlane.com

INDEX






Quick-Ship Drill Bushings ............................................................................................................................................................ pp. 552-553
Bushing Selection ......................................................................................................................................................................................................................... pp. 546-547
Installation and Technical Data ................................................................................................................................................................................................ pp. 548-549
Counterbore Data .....................................................................................................................................................................................................................................p. 551


P H SP
Head Serrated
Press Fit Press Fit Press Fit
pp. 554-565
pp. 559-563 pp. 564-565


SF FM L

Slip/Fixed Flat Milled Liner
Renewable Renewable pp. 573-575
pp. 566-570 pp. 571-572



HL UL Lockscrews
Head Locking and Clamps
Liner Liner pp. 580-581
pp. 576-577 p. 578


CH DC Oil

Chip Directed Groove
Breaker Coolant pp. 586-588
pp. 582-583 pp. 584-585


DG SG ULD

Diamond Serrata Diamond Knurl
Groove Groove Locking Liner
pp. 589-590 p. 591 p. 592



EZ TB GD

EZ Cast Template Gun Drill 13
p. 593 pp. 594-597 pp. 598-600


CB A

Circuit Board Air-Feed
Air Feed Accessories
(Please see our
pp. 601-611 pp. 612-614
web catalog)


www.carrlane.com 8/18 | Carr Lane Manufacturing Co. | 545

BUSHING SELECTION




INCH METRIC FLAT MILLED RENEWABLE:
P - 20 - 8 - .1250 PM - 8 - 12 - 4.50
Type OD Length ID as Type OD Length ID
in 64ths in 16ths 4-place in in as 2-place
of an inch of an inch decimal inch mm mm decimal mm
Types FM and FMC (carbide). Replaceable bushing used for extra resistance
PRESS FIT: to rotational forces under harsh conditions. This bushing, generally used
with a liner, has a milled locking flat to allow fastening securely with a flat
clamp. FM bushings also have a standard recess on the other side to allow
using a lockscrew instead.

LINER:

Types P, PC (carbide), and PM (metric). This is the most-popular and least-
expensive drill bushing. P bushings are permanently pressed into the jig
plate, usually flush with the top surface. They are generally used for single-
step drilling or reaming operations when you do not expect to replace
bushings during the tooling’s lifetime. P bushings can be mounted closer
together than headed bushings, but offer less resistance to heavy axial loads. Types L and PM (metric). Liners are permanent bushings used to hold
renewable drill bushings. The liner’s ID has a precise sliding fit with
HEAD PRESS FIT: the renewable bushing’s OD. The hardened liner accurately locates the
renewable bushing and protects the jig plate from wear caused by frequent
bushing replacement. Note: Metric liner bushings are the same as metric
press-fit bushings.
HEAD LINER:

Types H, HC (carbide), and HM (metric). Similar to a P bushing, but with a
head to resist heavy axial loads. H bushings are permanently pressed into
the jig plate. They are generally used for single-step drilling or reaming
operations when you do not expect to replace bushings during the tooling’s
lifetime. The head can be left exposed, or recessed by counterboring the
installation hole. Note: The “length” listed for a inch head-press-fit bushing Types HL and HM (metric). Similar to an L bushing, but with a head to resist
refers to its length under the head, while the metric version’s “length” is its heavy axial loads. Head liners are permanent bushings used to hold renewable
overall length.
drill bushings. The head liner’s ID has a precise sliding fit with the renewable
bushing’s OD. The hardened head liner accurately locates the renewable
SERRATED PRESS FIT: bushing and protects the jig plate from wear caused by frequent bushing
replacement. Note: The “length” listed for a head liner refers to its overall length,
not its length under the head. Metric head-liner bushings are the same as metric
head-press-fit bushings.

™
UN-A-LOK LINER:
Types SP and SPM (metric). Similar to a P bushing, but with top serrations to
prevent rotation in soft materials. Recommended in high-torque situations
for materials such as magnesium, aluminum, masonite, or wood. Finish-
ground OD ensures accurate ID location. Serrations also resist axial force to
prevent pushing the bushing through the jig plate.
Types UL and ULM (metric). Similar to an HL head liner, but incorporating a
SLIP/FIXED RENEWABLE: special locking tab that eliminates the need for a lockscrew. Un-A-Lok liners
are permanent bushings used to hold SF renewable drill bushings (on the
“slip” side only, not the “fixed” side). Although slightly more expensive than a
head liner plus a lock screw, installation time is dramatically reduced.

CHIP BREAKER:
13
Types SF, SFC (carbide), and SFM (metric). Replaceable bushing generally
used with a liner bushing and lockscrew. Use when you expect to replace
bushings during the tooling’s lifetime, or when you want to switch bushings
to perform multi-step operations with the same tooling. SF bushings
combine the benefits of older S-type slip-renewable and F-type fixed-
renewable bushings: One side has a small recess for fixed mounting; the
other has a locking recess that allows the bushing to slip down, then lock Types CH and CHM (metric). Similar to an SF renewable bushing, but with
in place by rotating it. S and F types are now obsolete and combination SF specially designed chip-breaking notches on the drill-exit end. Use to break
bushings will be furnished at no extra charge. up chips from tough, stringy materials, to reduce friction and heat buildup.
Reduces bushing wear at the drill-exit end and reduces the chance of tool or
workpiece damage. A chip-breaker bushing should extend beyond its liner to
allow chips to escape. Chip breakers are also available on other bushing types
such as P, H, and DC.


546 | Carr Lane Manufacturing Co. | 8/18 www.carrlane.com

BUSHING SELEC
BUSHING SELECTIONTION


DIRECTED COOLANT: EZ CAST LINER:






Type EZ. Another liner for cast-in-place or potted installation, used to hold SF
Types DC, DCCH (chip breaker), DCL (liner), and DCHL (head liner). Similar to renewable drill bushings. Unlike diamond-knurl unilock liners, EZ-cast liners
an SF renewable bushing, but with passages to direct coolant to the cutting hold either the “slip” or “fixed” side of an SF bushing, since they include an
area. This design is particularly good for washing away chips, especially integral lockscrew holder. Diamond-knurled OD provides superior holding
when ordered as the combination Directed Coolant Chip Breaker (DCCH). DC strength against both rotational and axial forces. Since the bushing’s OD
bushings require special liners, DCL or DCHL, to direct coolant from a drilled is not ground, keep the ID accurately located during casting or potting to
manifold passage to the holes in the bushing’s OD wall. ensure accuracy in the finished tool.
OIL GROOVE: GUN DRILL:


Drill

Coolant passage
Oil grooves are available on most drill-bushing types, including P, H, and Workpiece
SF. Use when you need complete drill lubrication and cooling, such as Types GD, GDL (liner), and GDI (insert). Drill bushings for gun-drilling machines,
when drilling hardened steel. Oil grooves are specially designed coolant such as Eldorado, Drillmation, DeHoff, and Lahr. Gun drill bushings are similar
passageways in the bushing’s ID wall. Choose from 25 different groove to SF renewable bushings, but with the drill bearing at the bushing’s head end.
styles. End wipers are also available, to keep out dirt and chips. Depending on the gun-drilling machine, bushings are either one-piece or two-
piece (a liner and an insert).
DIAMOND GROOVE:
TEMPLATE: Bushing
Retainer
Ring


Types DG and DGM (metric). A bushing for cast-in-place or potted installation.
Diamond-knurled OD provides superior holding strength against both Type TB. An economical bushing designed for thin template jig plates from
rotational and axial forces. Since the bushing’s OD is not ground, keep the 1/16- to 3/8-inch thick. Bushings are held in place by a retainer ring. The OD
ID accurately located during casting or potting to ensure accuracy in the serrations prevent the bushing from spinning. Bushings can be removed
finished tool. and reused by breaking the aluminum retainer ring (extra retainer rings
available).
SERRATA GROOVE:
CIRCUIT BOARD:





Type SG. Can be cast in place or potted, just as a diamond-groove bushing,
or can also be pressed into an installation hole. Straight knurl provides less Types CB and CBC (carbide). Headless and head-type bushings made
resistance to axial loads than the diamond knurl on a DG bushing. Since the especially for circuit-board drilling machines. Available for Electro-Mechano,
bushing’s OD is not ground, keep the ID accurately located during casting or Excellon, Waco, Digital, Nationwide, Edlund, Tektronix, Leland-Gifford,
potting to ensure accuracy in the finished tool. Palomar, Hughes, Rapidrill, and Reliable drilling machines.
™
DIAMOND-KNURL UN-A-LOK LINER:
AIR-FEED DRILL:

13


Types ULD and ULDM (metric). A liner for cast-in-place or potted installation,
used to hold SF renewable drill bushings. Un-A-Lok™ liners incorporate
a special locking tab that eliminates the need for a lockscrew. Holds only Type A. Drill-bushing shanks, collars, adaptors, and locking accessories for
the “slip” side of an SF bushing, not the “fixed” side. Diamond-knurled OD air-feed drills, tappers, and back-spotfacers. Available for all standard drill
provides superior holding strength against both rotational and axial forces. motors, including Gardner-Denver, Keller, Aro, Buckeye, Quackenbush,
Since the bushing’s OD is not ground, keep the ID accurately located during Desoutter, and Ingersoll-Rand.
casting or potting to ensure accuracy in the finished tool.





www.carrlane.com 8/18 | Carr Lane Manufacturing Co. | 547

INSTALLATION AND TECHNICAL DATA



RECOMMENDED CHIP CLEARANCE: SPECIAL BUSHINGS FOR CLOSE HOLE
SPACING:






1/2 to 1-1/2 times
drill dia




To minimize drill bending and maximize hole accuracy, mount drill
bushings as close to the workpiece as possible while still allowing
adequate chip clearance. The necessary clearance depends on
workpiece material and chip stringiness. For example, cast iron, with
fine chips requires about 1/2 times drill diameter for chip clearance.
Materials that produce long, stringy chips, such as cold-rolled
steel and aluminum, require at least one-drill-diameter clearance.
To reduce clearance even with long, stringy chips, exit-end chip
breakers are available. INFO+: See pages 582-583.





When holes are located close together, special bushings are
sometimes required. Thinwall bushings, where the bushing ID is
larger than the normal ID range for a given OD, are often a good
solution. Holes for thinwall bushings must be very accurate and
round, because these bushings are more easily distorted. For
very-close hole spacing, especially with headed bushings, specify
Direct workpiece contact is usually not recommended. Chips can
escape only up through the drill’s flutes, drill-bearing length is bushings with ground flats.
shortened by the drill point’s length, and drill-withdrawal burrs
can raise the jig plate. Direct contact may be necessary, though, for
maximum bearing length when drilling sloped surfaces (see below). INSTALLATION-HOLE PREPARATION
Also, reamer bushings can be mounted much closer than drill
bushings, due to much finer chips, for more-accurate hole finishing. FOR PRESS-FIT BUSHINGS:

SPECIAL BUSHINGS FOR SLOPED
WORKPIECE SURFACES:





Excessive interference causes bellmouthing


Angled
exit end To avoid jig-plate or bushing distortion, do not use excessive
13 interference fits on press-fit bushings. See tables on opposite
page for recommended hole sizes in unhardened steel or cast iron
jig plates. Always prepare installation holes using a jig borer or
reamer. Standard chucking reamers (with a plus tolerance) usually
produce installation holes to the tolerances shown in the table.
Whenever the drilling axis is not perpendicular to the workpiece Other factors to consider are: (1) headed bushings require less
surface, locate the exit end as close to the part as possible. interference to resist drilling thrust; (2) longer bushings in thick
Otherwise the drill will tend to wander. For maximum drill guiding, plates require less interference; (3) bushings with thinner walls are
we recommend specifying bushings with an angle milled on the more prone to distortion; (4) less-ductile jig-plate materials require
exit end, tangent to the workpiece surface at point of entry. less interference.





548 | Carr Lane Manufacturing Co. | 8/18 www.carrlane.com