REKA BENTUK PEMBUATAN
PERABOT
VRT3023(A)
UNIVERSITI PENDIDIKAN SULTAN IDRIS
PROFESOR MADYA DR. MOHAMED NOR AZHARI BIN AZMAN
PREPARED BY :
• MIRRAH AYU FARHANA BINTI BAJURI (D20192092073)
• MAYANG SARI BINTI ABDUL WAHAB (D20192092070)
• NAZIRAH BINTI IBRAHIM (D20192091879)
• MUHAMAD AKMAL HAFIZ BIN MUHAMAD DAN (D20192091880)
• MUHAMMAD FIRDAUS BIN MOHD SHORKRI (D20192091884)
• HUZAINIE HADI BIN RAHMAN (D20192091464)
REASSEMBLY OF
WOODEN HANGERS
NAME : MIRRAH AYU FARHANA BINTI BAJURI
NO MATRIC : D20192092073
MAJOR : BACHELOR IN DESIGN AND TECHNOLOGY EDUCATION
FACULTY : TECHNICAL AND VOCATIONAL
INTRODUCTION
◦ Hanger reassembly is very easy to install and
uses light wood furniture. its unique shape
can be made into jewelry and hang various
items for convenience.
TOOLS
screw Screwdriver
SEPARATION PROCESS
UNSCREW THE HANGERS
• Unscrew the hangers should
be with an anti-clockwise
screwdriver
• Each piece is required to be
placed in a safe place
• The process of opening each
piece is the same step
REINSTALLATION PROCESS
• Connecting the pole
with the site using a
screw.
• Tighten the screws to
erect the pole
• This process also
named as a mortise
and tenon joint. They
furnish a strong
outcome and connect
by locking into place
Reinstallation Process
• Screw all the item using
screwdrive.
• Repeat the same step
• Slowly begin to twist
clockwise until is flush
(two hands motion goes
a little bit faster)
Result After
Before
Conclusion
◦ Can be a great experience
◦ Be able to learn to use hand tools correctly
◦ Learn to use tools that are at home using limited tools
◦ Gain new experiences by doing your own work at home
◦ A setter is a type of pin made of wood, plastic or steel which fits into two suitable holes.
This mortise that uses pins is called a setter mortise.
Rujukan
Internet
◦ https://anyflip.com/khjes/lidz/
◦ http://michifayorofo.blogspot.com/p/buletin.html
Name: Mayang Sari binti Abdul Wahab
Matric Number: D20192092070
Faculty: Technology and Design
“LACK” SIDE TABLE ASSEMBLY
INTRODUCTION
The “Lack” Side Table
From IKEA. It’s easy to
assemble, lift and move
around
• Width: 55 cm
• Height: 5 cm Leg: Materials
• Length: 76 cm
• Weight: 4.30 kg Particleboard, Fibreboard, Paper foil
Top:
Particleboard, Honeycomb structure
paper filling (100% recycled),
Fibreboard, Acrylic paint, Clear
acrylic lacquer, Plastic edging
TOOLS & EQUIPMENT 4 TABLE LEGS
TABLE LEG PADS
SCREWS
TABLE TOP SURFACE
Assemble Instructions 1 Attention: The joint holes are prepared by product
manufacturer, please use driller in order to build
Press the table leg pad the new hole if needed
1 down until it fully into
2
the hole,
Each holes is Repeat the sama
made with mortise process for next 3 table
working procedure legs.
Assemble Instructions 2 Attention: The joint holes are prepared by product
manufacturer, please use driller in order to build
1 the new hole if needed.
2
For applying the table legs, match the screw Stand the leg, and slowly begin to twist
with each table leg into the hole clockwise until leg and surface is flush (two
hands motion goes a little faster)
Assemble Instructions 3
3
Repeat process number 2 with exactly This process also named as a mortise and tenon joint,
the same for next 3 legs, because it’s connects two pieces of wood. They furnish a
strong outcome and connect by locking into place
Final Result
Give it a simple makeover for final touches. Simplicity is
the ultimate form of sophistication.
CONCLUSION
• The “Lack” Side Table is a furniture that does not require a complex
installation steps, even if we want to making a new furniture, the
work steps is not terribly difficult but is time-consuming. Mortise and
tenon joints process has been used for making each holes because
they are strong and stable joints that can be used in many projects.
The mortise and tenon joint is considered to be one of the strongest
joints next to the common dovetail joint.
FIX CLOSET DOOR
NAZIRAH BINTI
IBRAHIM
D20192091879
TOOL
Provide screw driver with appropriate
size
INSTRUCTION
Unscrew the bottom screw to see
screw’s size
Disassemble this unwanted shoe Find the suitable screw
rack.
Found the right size
Close the closet door
Insert the screw like this Tighten the screws using screw
driver.
FINAL RESULT
CONCLUSION
• In conclusion, this closet door can be repaired
even if using screws from other furniture. As
long as it has the same size so that it can be
inserted into the existing hole.
CHAIR REPAINT
Name: Muhamad Akmal Hafiz bin Muhamad Dan
No. Matrix: D20192091880
Major: ISMP Reka Bentuk dan Teknologi
Faculty: Technical & Vocational
TOOLS
sander Varnish and paint Screwdriver
brush
2
UNSCREW THE CHAIR
• Unscrew the chair with
screwdriver
• make sure the setter mortise
is removed properly
SANDING PROCESS
• Sand the part of
chair to remove the
old paint.
• Sand it using the sand
and paper sand
REINSTALLATION PROCESS
• Reinstallation the chair for paint
• Reinstallation using the screwdriver
• make sure the setter mortise is
inserted properly
PAINT PROCESS
• Paint the chair using
varnish
• Mix the varnish with tinner
FINAL RESULT
before after
CONCLUSION
• the chair needs to be repaired by repainting the chair. this
is because the chair is made of wood that will be
damaged if exposed to water and air. therefore,
repainting is necessary to extend the life of the chair.
Bookcase
Reinstallation
Name: Muhammad Firdaus Bin Mohd Shorkri
No. Matrix: D20192091884
Major: ISMP Reka Bentuk dan Teknologi
Faculty: Technical & Vocational
Tools
Screw Screwdriver
2
Type of Tanggam used
This installation process
uses Tanggam Sambung
Sendi (Housing Joint)
and used to connect
between pieces of
furniture
3
Separation Process
- The cupboard will be separated
into several parts using a
screwdriver
- While doing the separation, the
furniture can be placed and
separated from the bottom up.
4
Separation Process
- How to unscrew the cupboard
should be with an anti -
clockwise screwdriver
- Each piece is required to be
placed in a safe place
- The process of opening each
piece is the same for
separating these cupboards.
5
Results After Separating Into
Several Parts
Finish separating all the pieces
on the furniture
6
Reinstallation Process
Reassembly process on the sides Then use a screwdriver to connect
and bottom of the cupboard each piece of the cupboard
Installation Process
Make sure the back of the cupboard is
placed in the right place
Reinstallation Process
Next, take the next piece and use a screwdriver to
tighten the screws
9
Reinstallation Process
Repeat the same steps then
tighten the screws using a
screwdriver
10
Results After
Reinstallation
11
Conclusion
In conclusion, disassemble and reassemble
this bookcase does not require many tools to
use. The furniture is very user friendly and
easy to install. The bookcase can be used for
a long time by placing heavy items on the
bottom and light items on top. This
installation process uses Tanggam Sambung
Sendi (Housing Joint) and used to connect
between pieces of furniture
12