P-115-123

STANDARD KEMAHIRAN PEKERJAAN KEBANGSAAN

(NATIONAL OCCUPATIONAL SKILL STANDARD)

P-115-1
MEKANIK KENDERAAN MOTOR

(MOTOR VEHICLE MECHANIC)
P-115-2

MEKANIK KENDERAAN MOTOR
(MOTOR VEHICLE MECHANIC)
P-115-3

JURUTEKNIK KENDERAAN MOTOR
(MOTOR VEHICLE TECHNICIAN)

Kementerian Sumber Manusia, Malaysia

5.

JAWATANKUASA PROFIL TUGASAN

6.

PROFIL TUGASAN

PENDAHULUAN

1. Pembentukan Standard Kemahiran Kebangsaan (SKK)

1.1 Standard Kemahiran Pekerjaan Kebangsaan (SKPK) [National Occupational
Skill Standard (NOSS) adalah satu dokumen yang menggariskan perkara-
perkara yang perlu diperolehi oleh seseorang pekerja di dalam sesuatu bidang
kemahiran. Semua perkara yang terkandung di dalam SKPK akan dinilai
berasaskan ketrampilan untuk memastikan setiap pekerja berkebolehan
melakukan perkara-perkara berkenaan pada tahap yang boleh diterima.

1.2 Pembentukan Standard Kemahiran Pekerjaan Kebangsaan dilakukan dengan
melibatkan pakar-pakar dari industri (awam dan swasta) dan personel dari
agensi/institusi latihan, mengikut bidang masing-masing. Pembentukannya
dilakukan dalam dua peringkat:

• Peringkat pertama dinamakan “Job Analysis” melibatkan antara lapan
hingga sepuluh orang personel industri yang dijemput mengambil
bahagian dalam pembentukan standard berkenaan. Mereka bersidang
antara dua hingga tiga hari untuk menghasilkan rangka standard, yang
disusun dalam bentuk carta. Carta ini mengandungi dua komponen
penting iaitu Duti (Duty) dan Tugasan (Task) yang dinamakan carta profil
pekerjaan. Carta ini kemudiannya diedarkan kepada industri yang terlibat
untuk mendapatkan komen.

• Peringkat kedua dinamakan “Task Analysis” dilakukan dengan
melibatkan ahli-ahli jawatankuasa peringkat pertama tadi dan ditambah
dengan beberapa orang personel dari agensi/institusi latihan. Mereka
bersidang empat hingga lima hari. Pada peringkat ini, carta profil
pekerjaan yang mengandungi duti dan tugasan itu dikupas secara
terperinci. Sesuatu tugasan itu disediakan dengan “Performance
Standard” (PS), langkah-langkah kerja, keperluan memboleh (Enabling
Requirement) dan peralatan dan perkakas. Produk “Task Analysis” ini
dinamakan “Task Profile”.

2. Format Standard Kemahiran Pekerjaan Kebangsaan

2.1 Dokumen standard adalah mengandungi perkara-perkara berikut:
• Tajuk
• Takrif Pekerjaan
• Task Profile yang merupakan jadual-jadual yang mengandungi
“Performance Standard”, langkah-langkah kerja, keperluan memboleh
“Enabling Requirement” dan peralatan dan perkakas.

2.2 Tiap-tiap dokumen standard yang dibentuk, disediakan dengan Takrif
Pekerjaan (Occupational Defination) mengikut tajuk standard berkenaan.
Seboleh mungkin, takrif pekerjaan ini akan berlandaskan kepada “Dictionary
of Classification” (DOC) yang dikeluarkan oleh Jabatan Tenaga Manusia
Kementerian Sumber Manusia. Terdapat dua kategori takrif pekerjaan iaitu:

• Takrif pekerjaan tahap 1 dan 2 merangkumi kemahiran pengetahuan di
peringkat operasi/pengeluaran.

• Takrif pekerjaan 3 merangkumi kemahiran dan pengetahuan diperingkat
penyelia / juruteknik.

2.3 Sesuatu standard mengandungi sekumpulan duti yang merupakan unit-unit
kemahiran dalam standard berkenaan, dan duti-duti tersebut adalah tidak
bergantungan di antara satu sama lain. Tiap-tiap duti mengandungi
sekumpulan tugasan. Pengrekodan tugasan-tugasan adalah mengikut ciri
berikut:

• Ia mengandungi kata perbuatan (action verb) dan objek yang
menerima perbuatan tersebut.

• Ia mestilah jelas dan tepat.

• Ia boleh mengandungi satu atau lebih “qualifier”

3. Tahap-tahap dalam Standard Kemahiran Pekerjaan Kebangsaan

3.1 Dokumen standard ini mengandungi tiga tahap iaitu 1.2 dan 3. Tahap-tahap
tersebut adalah berkait rapat dengan sistem Persijilan Kemahiran Kebangsaan.
Dalam erti kata lain, seseorang individu yang telah mencapai kemahiran
dalam tahap 1akan diberi Sijil Kemahiran Malaysia Tahap 1 dan seterusnya

.
3.2 Penjelasan bagi ketiga-tiga tahap adalah seperti berikut:

Tahap 1
Trampil dalam melakukan sekumpulan duti pada tahap ini bagi bidang
pekerjaan berkaitan. Ketrampilan yang terkandung dalam tajap ini
kebanyakannya adalah “routine” dan “predictable”.

Tahap 2
Trampil dalam melakukan sekumpulan duti pada tahap ini. Ketrampilan yang
terkandung dalam tahap ini sesetengahnya adalah bukan “routine” dan
dilakukan dalam pelbagai konteks yang memerlukan tanggungjawab
persendirian dan autonomi.

Tahap 3

Trampil dalam melakukan sekumpulan duti pada tahap ini. Ketrampilan yang
terkandung dalam tahap ini merangkumi sekumpulan duti yang luas dalam
pelbagai konteks dan bukan “routine” dan autonomi serta perlu memberi
kawalan dan panduan kepada yang lain.

3.3 Khusus bagi Tahap 3, kandungan kemahiran yang terdapat dalam dokumen ini
adalah meliputi kemahiran teknikal sahaja dan tidak meliputi kemahiran
penyeliaan. Untuk kemahiran penyeliaan perlu menggunakan dokumen
tambahan bidang penyeliaan tahap 3.

4. Kelulusan Jawatan Standard dan Persijilan (JSP)

4.1 Dokumen ini telah diluluskan oleh Jawatankuasa Standard dan Persijilan
(JSP) Majlis Latihan Vokasional Kebangsaan pada 16 Julai 1998. NOSS asal
yang bertajuk Mekanik Kenderaan Motor telah diwujudkan pada 7 Julai
1993.

Ketua Pengarah
Majlis Latihan Vokasional Kebangsaan
Kementerian Sumber Manusia Malaysia
KUALA LUMPUR

TAKRIF PEKERJAAN

(OCCUPATIONAL DEFINITION)

LEVEL 1

Occupational Definition of A Motor Vehicle Mechanic

A Motor Vehicle Mechanic is designated to perform activities such as servicing,
overhauling and replacing of defective components including recommending to customer
the life span of parts and their durability.

In particulars he/she:

1. Performs vehicle maintenance.
2. Services carburetion system, diesel fuel system, and vehicle electrical system.
3. Performs engine repair by service cooling and lubricating system and carry out

top overhaul.
4. Repairs manual drive train by checking transaxle, transmission and rear axle.
5. Repairs brake system by bleeding brake system.
6. Repairs steering and suspension system.

TAKRIF

LEVEL 2

OCCUPATIONAL Definition of A Motor Vehicle Mechanic

A Motor Vehicle Mechanic is designated to perform activities such as servicing,
overhauling and replacing of defective components including recommending to customer
the life span of part and their durability.

In particular he/she:
1. Services carburetion system
2. Services diesel system
3. Services vehicle electrical system
4. Performs engine repair by carrying out engine overhaul
5. Services electronic fuel injection system
6. Repairs clutch system
7. Repairs manual drive train
8. Repairs brake system
9. Repairs steering system
10. Services turbocharger

LEVEL 3

OCCUPATIONAL Definition of A Motor Vehicle Technician

A Motor Vehicle Technician is designated to perform activities that involves analysis,
synopsis and performs diagnostics testing for the whole motor vehicle system. He also
determines the serviceability and the life spans of component including recommending
suitable components for charges. He also responsible for supervising, training and
guiding mechanics under his supervision in arranging out normal duties.

In particular he/she:

1. Performs road test and analyze test results.
2. Services diesel duel system by overhaul fuel injection pump.
3. Repairs manual drive train by overhaul transfer box.
4. Repairs automatic transmission by conducting pressure and stall test, test drive,

gear shift pattern and overhaul automatic transmission.
5. Overhaul turbocharger.
6. Performs supervisory function.

AHLI JAWATANKUASA ANALISIS
PERKERJAAN

BAGI BIDANG MEKANIK KENDERAAN
BERMOTOR

EN. LEONG CHOK FONG
Tractor’s Malaysia Sdn. Bhd.

EN. CHEAH WING YEW
Cycle & Carriage Bintang Bhd.

EN. VINCENT CHONG
Perunding Kemahiran Penyeliaan & Pengurusan Sdn. Bhd.

EN. MOHD YUNUS BIN AHMAD
IKM- Lumut

EN. MOHD NOR BIN BORHAN
IKM- Lumut

EN. MOHD EFFENDI OOI ABDULLAH
MPT-Cheras

EN. MOHD AINI BIN MAHNI
PPKK, Jab. Kebajikan Masyarakat, Malaysia.

EN. WANG ANUAR FOOT HIANG
Tractor’s Malaysia Sdn. Bhd.

EN. ANUAR BIN OTHMAN
Tan Chong Motor & Sons

EN. AHMAD ZAMRI BIN SAID
IJED, Port Dickson

EN. ISMAIL BIN IBRAHIM
IJED, Port Dickson

EN. P. PERIASAMY
Sek. Men. Teknik, Port Dickson

URUSETIA
EN ZAHARUDIN BIN ABDUL LATIF

MLVK

JOB PROFILE FOR A⋅
1) MOTOR VEHICLE MECHANIC - LE
2) MOTOR VEHICLE MECHANIC - LE
3) MOTOR VEHICLE TECHNICIAN - LE

DUTY Carry out service on Carry out check Carry out corrective Carry out road test
vehicle according to vehicle measures
PERFORM VEHICLE maintenance charts
MAINTENANCE AND
ROAD TEST 01.01 L1 01.02 L1 01.03 L2 01.04 L3

01

SERVICE Check fuel system Check air and fuel Replace fuel pump Tune up carburetor
CARBURETOR for proper function filters 02.03 L1 02.04 L1
SYSTEM
02.01 L1 02.02 L1
02

SERVICE DIESEL FUEL Check diesel fuel Change diesel fuel Test diesel fuel Time diesel fuel
SYSTEM system for proper filter injectors injection pump to
functioning engine
03
03.01 L1 03.02 L1 03.03 L1 03.04 L2

SERVICE VEHICLE Check charging Check starting Check ignition Check lighting
ELECTRICAL SYSTEM system system system system

04 04.01 L1 04.02 L1 04.03 L1 04.04 L1

Check dashboard Check power
instruments windows

04.10 L2 04.11 L3

PERFORM ENGINE Service cooling Service lubricating Determine engine Carry out top
REPAIR system system condition overhaul

05 05.01 L1 05.02 L1 05.03 L1 05.04 L1

⋅

P-010-1/2/3 (JSP 2/98)16 Julai 98

EVEL 1
EVEL 2
EVEL 3

TASK

Analyse road test
result

01.05 L3

Replace fuel tank Overhaul carburetor

02.05 L2 02.06 L2

Overhaul diesel fuel
injection pump

03.05 L3

Adjust alignment of Check wiper system Overhaul starter Overhaul distributor Overhaul alternator
head lamp motor 04.08 L2 04.09 L2

04.05 L1 04.06 L1 04.07 L2

Carry out engine
overhaul

05.05 L2

DUTY

SERVICE ELECTRONIC Check electronic fuel Replace electrical Replace fuel injectors Replace air flow
FUEL INJECTION injection electronic fuel pump meter
SYSTEM fuel injection (EFI)
system pressure 06.03 L2 06.04 L2

06 06.01 L2 06.02 L2

REPAIR CLUTCH Check condition of Replace clutch cable Bleed clutch Overhaul clutch
SYSTEM clutch system hydraulic system master pump/slave
cylinder
07 07.02 L2 07.03 L2
07.01 L1 07.04 L2

REPAIR MANUAL DRIVE Check transaxle Check transmission Check rear axle Overhaul
TRAIN 08.02 L1 08.03 L1 transmission

08 08.01 L1 08.04 L2

REPAIR AUTOMATIC Service automatic Replace torque Conduct pressure Test drive gear shift
TRANSMISSION transmission converter and stall test pattern

09 09.01 L2 09.02 L2 09.03 L3 09.04 L3

REPAIR BRAKING Replace brake pad Replace brake disc Replace brake Bleed brake system
SYSTEM and lining and drums booster

10 10.01 L1 10.02 L1 10.03 L1 10.04 L1

REPAIR STEERING Service manual Replace manual Carry out wheel Overhaul manual
SYSTEM steering system steering system alignment steering box
component
11
11.01 L1 11.02 L1 11.03 L2 11.04 L2

REPAIR SUSPENSION Replace ball joints Replace suspension Replace shock Remove tyres from
SYSTEM bushes absorbers/bump rims
stoppers

12 12.01 L1 12.02 L1 12.03 L1 12.04 L1

Task

Replace electronic Replace electronic Check electronic fuel Replace electronic Check function of
fuel injection (EFI) fuel injection (EFI) injection (EFI) wiring control unit (ECU) emission control
sensors relay system devices

06.05 L2 06.06 L2 06.07 L2 06.08 L3 06.09 L3

Replace clutch
pressure plate, disc
and bearing

07.05 L2

Overhaul rear axle Overhaul transaxle Overhaul transfer
box

08.05 L2 08.06 L2 08.07 L3

Check electronic Overhaul automatic

transmission sensors transmission

09.05 L3 09.06 L3

Overhaul master Overhaul brake Test brake system Test anti-lock brake
pump calipers and wheel performance on the system
cyclinders road

10.05 L2 10.06 L2 10.07 L3 10.08 L3

Service power Overhaul power
steering system steering system

11.05 L2 11.06 L2

Remove coil Service suspension

springs/leaf springs components

12.05 L2 12.06 L2

SERVICE AIR Check air- Check air Check air Service air
CONDITIONING conditioning belt and conditioning system conditioning system conditioning gas
SYSTEM tension cooling capacity for gas leak system

13 13.01 L1 13.02 L2 13.03 L2 13.04 L2

SERVICE TURBO Carry out check on Test turbocharger Check turbocharger Replace
CHARGER turbocharger boost pressure lubrication pressure turbocharger

14 14.01 L3 14.02 L3 14.03 L3 14.04 L3

Install air Install evaporator coil
conditioning hoses, and blower
receiver drier,
compressor and
condenser

13.05 L2 13.06 L2

Overhaul
turbocharger

14.05 L3

OCCUPATION: MOTOR VEHICLE MECHANIC

DUTY NO. 01 DUTY: PERFORM VEHICLE MAINTENANC

TASK NO: 01 TASK: CARRY OUT SERVICE ON VEHICL

LEVEL: L1 PERFORMANCE STANDARD :

CARRY OUT SERVICE ON VEHICLE GIVEN
CAN OPERATE AT OPTIMUM CONDITION.

SUB-TASK / STEP ENABLING RE
(Knowledge, Skill, A

1. Change lubrication oil and oil filter Knowledge of :
1.1 Function of lubrication system
1.2 Types of oil filter
1.3 Grade of lubrication oil
1.4 Service intervals chart

Ability to :
1.1 Interpret service chart
1.2 Drain out lubrication oil
1.3 Remove oil filter
1.4 Install new oil filter
1.5 Fill in lubrication oil

1

CE AND ROAD TEST
LE

SERVICE MANUALS USING HAND TOOLS ETC. SO THAT THE VEHICLE

EQUIREMENTS TOOLS / EQUIPMENT
Attitude And Safety) / MATERIALS

1. Service manual
2. Maintenance chart
3. Hand tolls
4. Lubrication oil
5. Grease
6. Vacuum cleaner
7. High water pressure pump
8. Air filter
9. Oil filter

1

SUB-TASK / STEP ENABLING RE
2. Replace air filter (Knowledge, Skill, A
3. Wash vehicle
Attitude :
1.1 No spilling on the floor
1.2 Good house keeping
1.3 Fender cover
1.4 Handle lubrication and oil filter w
1.5 Use funnel

Safety :
1.1 Remove battery terminals
1.2 Use parking brake
1.3 Use wheel stopper
1.4 Ensure no leakage at drain plug

Knowledge of :
2.1 Purpose of air filter
2.2 Types of air filter

Ability to :
2.1 Remove air filter
2.2 Identify correct air filter
2.3 Install new air filter and tighten a

Attitude/safety :
2.1 Ensure air filter properly installed
2.2 Handle air filter with care

Knowledge of :
3.1 Area prohibited to spray with hig
3.2 Types of cleaning detergent
3.3 Types of degreaser

1

EQUIREMENTS TOOLS / EQUIPMENT
Attitude And Safety) / MATERIALS

with care

and oil filter

according to specification
d
gh water pressure

2

SUB-TASK / STEP ENABLING RE
(Knowledge, Skill, A

4. Vacuum interior of vehicle Ability to :
5. Lubricate door hinges and cable 3.1 Use suitable cloth for washing an

Safety :
3.1 Ensure the water hose do not sc
3.2 Use suitable cleaning detergent

Knowledge of :
4.1 Operation of vacuum machine

Ability to :
4.1 Vacuum the interior compartmen

Attitude :
4.1 Cleanliness

Knowledge of :
5.1 Types of lubrication
5.2 Types of grease

Ability to :
5.1 Lubricate the cable
5.2 Grease the door hinges

Attitude :
5.1 Good house keeping
5.2 Do not slam the door

Safety :
5.1 Do not spill oil on the floor

1

EQUIREMENTS TOOLS / EQUIPMENT
Attitude And Safety) / MATERIALS
nd drying
cratch paint work

nt

3

OCCUPATION: MOTOR VEHICLE MECHANIC

DUTY NO. 01 DUTY: PERFORM VEHICLE MAINTENANC

TASK NO: 02 TASK: CARRY OUT CHECK ACCORDING

LEVEL: L1 PERFORMANCE STANDARD
CARRY OUT CHECK ACCORDING TO VEHIC
TOOLS ETC. SO THAT VEHICLE CAN FUNC

SUB-TASK / STEP ENABLING REQUIRE
(Knowledge, Skill, Attitude

1. Determine the maintenance Knowledge of :
schedule of vehicle 1.1 Maintenance chart list

2. Carry out vehicle maintenance Ability to :
1.1 Select correct maintenance char

Knowledge of :
2.1 Read maintenance chart

Ability to :
2.1 Interpret maintenance chart

1

CE AND ROAD TEST
G TO VEHICLE MAINTENANCE CHARTS

CLE MAINTENANCE CHARTS GIVEN SERVICE MANUAL USING HAND
CTION ACCORDING TO MANUFACTURER'S SPECIFICATION.

EMENTS TOOLS / EQUIPMENT
And Safety) / MATERIALS

1. Maintenance chart
2. Hand tools
3. Floor jack
4. Special tools
rts 5. Hoist
6. Sand paper
7. Service manual
8. Replacement part

4

SUB-TASK / STEP ENABLING REQUIRE
(Knowledge, Skill, Attitude

Attitude
2.1 Good working habit
2.2 Cleanliness
2.3 Good house keeping
2.4 Use fender/seat/steering wheel

Safety :
2.1 Remove battery terminal

1

EMENTS TOOLS / EQUIPMENT
And Safety) / MATERIALS

l cover

5

OCCUPATION: MOTOR VEHICLE MECHANIC

DUTY NO. 01 DUTY: PERFORM VEHICLE MAINTENANC

TASK NO: 03 TASK: CARRY OUT CORRECTIVE MEAS

LEVEL: L2 PERFORMANCE STANDARD :

CARRY OUT CORRECTIVE MEASURES GIV
VEHICLE CAN OPERATE WITH OPTIMUM P

SUB-TASK / STEP ENABLING RE
(Knowledge, Skill, A

1. Follow vehicle maintenance check Knowledge of :

list, diagnose all faults 1.1 Basic principle of automobile

Ability to :
1.1 Diagnose the faults
1.2 Interprete the service manual

Attitude :
1.1 Use fender cover
1.2 Good house keeping

Safety :
1.1 Remove battery terminal

1

CE AND ROAD TEST
SURES

VEN SERVICE MANUAL AND USING MAINTENANCE CHECK LIST SO THAT
PERFORMANCE ACCORDING TO MANUFACTURER’S SPECIFICATION.

EQUIREMENTS TOOLS / EQUIPMENT
Attitude And Safety) / MATERIALS

1. Service manual
2. Fender cover
3. Hand tools
4. Special tools
5. Replacement part

6

SUB-TASK / STEP ENABLING RE
2. Removal of faulty parts (Knowledge, Skill, A

3. Inspect faulty parts Knowledge of :
2.1 Serviceable parts

Ability to :
2.1 Remove faulty parts
2.2 Interprete workshop manual

Attitude :
2.1 Handle the parts with care
2.2 Good house keeping
2.3 Use fender cover

Safety :
2.1 Remove battery terminal

Knowledge of :
3.1 Condition of serviceable faulty pa

Ability to :
3.1 Differentiate serviceable faulty pa

Attitude :
3.1 Handle parts with care
3.2 Good house keeping

1

EQUIREMENTS TOOLS / EQUIPMENT
Attitude And Safety) / MATERIALS

arts
arts

7

SUB-TASK / STEP ENABLING RE
4. Install new parts (Knowledge, Skill, A

Knowledge of :
4.1 Serviceable parts condition

Ability to :
4.1 Select the serviceable parts
4.2 Install the parts in systematic pro
4.3 Carry out adjustment (if necessa

Attitude/safety :
4.1 Use fender cover
4.2 Good house keeping
4.3 Handle the parts with care

1

EQUIREMENTS TOOLS / EQUIPMENT
Attitude And Safety) / MATERIALS

ocedure
ary) according to specification

8

OCCUPATION : MOTOR VEHICLE MECHANIC

DUTY NO. 01 DUTY: PERFORM VEHICLE MAINTENANC

TASK NO: 04 TASK: CARRY OUT ROAD TEST

LEVEL: L3 PERFORMANCE STANDARD
CARRY OUT ROAD TEST GIVEN SERVICE M
MALFUNCTION OF VEHICLE SYSTEM CAN

SUB-TASK / STEP ENABLING RE
(Knowledge, Skill, A

1. Check vehicle before road test Knowledge of :
1.1 Basic principle of automobile

Ability to :
1.1 Check the vehicle condition

2. Drive vehicle for road test Knowledge of :
2.1 Basic principle of automobile
2.2 Road safety sign

Ability to :
2.1 Select all gears during driving
2.2 Handle vehicle on various road

1

CE AND ROAD TEST

MANUAL USING VEHICLE STETHOSCOPE ETC. SO THAT ANY DEFECT OR
BE DETECTED

EQUIREMENTS TOOLS / EQUIPMENT
Attitude And Safety) / MATERIALS

1. Service manual
2. Job card
3. Vehicle
4. Stethoscope

d condition
9

SUB-TASK / STEP ENABLING RE
(Knowledge, Skill, A

Attitude :
2.1 Road courtesy
2.2 Safe driving

Safety :
2.1 Use seat belt
2.2 Possess a valid driving license
2.3 Obey road signs

3. Identify and locate noise source/ Knowledge of :
defects 3.1 Various types of noise

Ability to :
3.1 Differentiate the types of noise

a) rattle
b) humming
c) vibration
d) engine sound
3.2 Locate abnormal noise of vehic

Attitude :
3.1 Road courtesy
3.2 Safe driving

Safety :
3.1 Use seat belt
3.2 Possess a valid driving license

2

EQUIREMENTS TOOLS / EQUIPMENT
Attitude And Safety) / MATERIALS

;
cle

0

SUB-TASK / STEP ENABLING RE
4. Record test result (Knowledge, Skill, A

Knowledge of :
4.1 Test report job card

Ability to :
4.1 Write the job card

2

EQUIREMENTS TOOLS / EQUIPMENT
Attitude And Safety) / MATERIALS

1

OCCUPATION: MOTOR VEHICLE TECHNICIAN

DUTY NO. 01 DUTY: PERFORM VEHICLE MAINTENANC

TASK NO: 05 TASK: ANALYZE ROAD TEST RESULT

LEVEL: L3 PERFORMANCE STANDARD
ANALYZE ROAD TEST RESULT GIVEN SER
THAT THE VEHICLE PERFORMANCE MEET

SUB-TASK / STEP ENABLING RE
(Knowledge, Skill, A

1. Analyze the road test result report Knowledge of :
1.1 Various types of noise

Ability to :
1.1 Differentiate the types of noise

a) rattle
b) humming
c) vibration
d) engine sound

2

CE AND ROAD TEST

RVICE MANUAL USING TECHNICAL REPORT, EVALUATION FORM ETC. SO
T THE MANUFACTURER’S SPECIFICATION.

EQUIREMENTS TOOLS / EQUIPMENT
Attitude And Safety) / MATERIALS

1. Service manual
2. Vehicle
3. Road test report form

;

2

SUB-TASK / STEP ENABLING RE
(Knowledge, Skill, A

2.Report job that not meet the Knowledge of :
specification 2.1 Basic principle of automobile
2.2 Test report

Ability to :
2.1 Locate abnormal noise from ve

3. Send the vehicle to workshop for Knowledge of :
rework 3.1 Basic principle of automobile

Ability to :
3.1 Rectify the defect
3.2 Follow service manual

Attitude :
3.1 Use fender cover
3.2 Good house keeping

Safety :
3.1 Disconnect battery terminals

4. Retest the vehicle Knowledge of :
4.1 Basic principle of automobile
4.2 Road safety sign

2

EQUIREMENTS TOOLS / EQUIPMENT
Attitude And Safety) / MATERIALS

ehicle

3

SUB-TASK / STEP ENABLING RE
(Knowledge, Skill, A

Ability to :
4.1 Select all gears during driving
4.2 Handle vehicle on various road

Attitude :
4.1 Road courtesy
4.2 Safe driving

Safety :
4.1 Use seat belt
4.2 Possess a valid driving license

2

EQUIREMENTS TOOLS / EQUIPMENT
Attitude And Safety) / MATERIALS

d condition

4

OCCUPATION: MOTOR VEHICLE MECHANIC

DUTY NO. 02 DUTY: SERVICE CARBURATION SYSTEM

TASK NO: 01 TASK: CHECK FUEL SYSTEM FOR PROP

LEVEL: L1 PERFORMANCE STANDARD
CHECK FUEL SYSTEM FOR PROPER FUNC
EQUIPMENT SO THAT THE FUEL SYSTEM F

SUB-TASK / STEP ENABLING RE
(Knowledge, Skill, A

1. Inspect fuel system components Knowledge of :
for damage and fuel leaks 1.1 Fuel system layout
1.2 Fuel system component

Ability to :
1.1 Visual check for damaged comp
1.2 Visual check fuel leaks
1.3 Check and tighten connecting c

Safety :
1.1 No smoking
1.2 Keep away from spark or fire
1.3 Perform task in well ventilated a

2

M
PER FUNCTION

CTION GIVEN WORKSHOP SERVICE MANUAL USING HAND TOOLS AND
FUNCTION ACCORDING TO MANUFACTURER’S STANDARD

EQUIREMENTS TOOLS / EQUIPMENT
Attitude And Safety) / MATERIALS

1. Service manual
2. Hand tools
3. Fuel pressure gauge

ponents
clips on fuel hoses

area

5

SUB-TASK / STEP ENABLING RE
(Knowledge, Skill, A

2. Install fuel pressure gauge to the Knowledge of :
fuel system 2.1 Basic operation of fuel system
2.2 Follow service manual

Ability to :
2.1 Connect fuel pressure gauge

Safety :
2.1 No smoking
2.2 Keep away from spark or fire

3. Start engine and observe fuel Knowledge of :
pressure when engine running 3.1 Basic operation of fuel system
3.2 Pressure gauge

Ability to :
3.1 Read fuel pressure gauge
3.2 Read service manual

Safety :
3.1 Handle with care

4. Remove fuel pressure gauge from Knowledge of :
fuel system 4.1 Fuel system layout

2

EQUIREMENTS TOOLS / EQUIPMENT
Attitude And Safety) / MATERIALS

6

SUB-TASK / STEP ENABLING RE
(Knowledge, Skill, A

Ability to :
4.1 Disconnect fuel pressure gauge
4.2 Install fuel system pipe line
4.3 Check fuel system in proper fixi

Safety :
4.1 Take care for fuel leakage

2

EQUIREMENTS TOOLS / EQUIPMENT
Attitude And Safety) / MATERIALS

e
xing

7