WEB_CP_PUMP CATALOG SHEETS_BINDER

CPACE 1/2HP
UTILITY

FEATURES/BENEFITS www.championpump.com

• 1/2HP Air Cooled Motor
• Cast Iron Motor & Pump Housing
• Glass Reinforced Plastic Impeller
• 10’ Power Cord
• 1/2” Brass Garden Hose Connectors

SPECIFICATIONS

• 1/2HP
• 115V
• 60Hz
• 8.1 FLA

APPLICATIONS

• Water Transfer
• Draining Hot Water Heaters
• Boost Water Pressure

Total Head, TDHCHAMPION PUMP - PUMP PERFORMANCCEPCAUCREVEPerformance

140 30

120

100

80

60

40

20

0
0 5 10 15 20 25

Gallons Per Minute, GPM
Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805
Phone 419-281-4500 • Toll Free 800-659-4491 • Fax 419-616-1100

CPES5 1/2HP

EFFLUENT/SUMP

Every pump tested in water to ensure pump
meets peformance curve.

FEATURES/BENEFITS POWER CORD

PERFORMANCE Sealed entry quick disconnect power cords
Heads up to 37’ TDH - Prevents water from entering the motor
Flows up to 72 GPM housing through a cut cord
- Easy to replace in the field
- Available in lengths up to 100’
MOTOR
High efficient, 115v, oil filled, permanent split
capacitor motor with upper and lower ball SWITCH
bearings and thermal overload protection Piggy-back switch design
- Constant bearing lubrication - Defective switches can be diagnosed over
- Maximum motor cooling the phone
- Runs cooler and lasts longer - Pump can be operated manually or
- Internal overload protection supplied with other piggy-back switches
- Quiet operation - Switch can be replaced without having to
- Fasteners and shaft made from rugged, replace the pump

corrosion resistant stainless steel APPLICATIONS

SEAL DESIGN Basements, dewatering, septic systems,
Mechanical with secondary dynamic lip seal residential and commercial
developments and elevator pits
- Provides added leakage protection

IMPELLER DESIGN
Non-clog style vortex impeller
- Designed to help reduce clogging by foreign
material

Wide-Angle Float Vertical Float

1/2 HP submersible pumps that handle up to 3/4”
solids with 2’’ discharge with 1 1/2” adapter

PERFORMANCE CURVE

Total Head, TDH

CPES5

Gallons per Minute, GPM REV 0817

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

TECHNICAL DATA

DISCHARGE 2” NPT. with 1-1/2” adapter included

SOLIDS HANDLING 3/4”

LIQUID TEMPERATURE 140 Degrees F. (Intermittent)

MOTOR HOUSING Cast Iron

VOLUTE Engineered glass filled thermoplastic

SEAL PLATE Cast Iron

IMPELLER Engineered glass filled thermoplastic/
Vortex

SHAFT Stainless Steel

SHAFT SEAL (SINGLE SEAL) Mechanical with secondary dynamic
lip seal, carbon rotating face, ceramic
stationary face, Buna-N elastomer,
300 series stainless steel hardware

BEARINGS (UPPER & LOWER) Single row, ball, oil lubricated

HARDWARE 300 Series stainless steel

O-RINGS Buna-N

CORD 10’ Length standard. Up to 100’ available.
(UL/CUL) Listed 16 AWG, Type SJTW

MOTOR (SINGLE PHASE) 1/2 HP 3450 RPM, 60 Hz, NEMA L
Includes overload protection in the
motor, oil filled, class B permanent split
capacitor

WEIGHT 25 lbs. (Manual)

MODEL(S) INFORMATION

MODEL HP VOLTS PHASE AMPS CORD LENGTH SWITCH

CPES5-11 1/2 115 1 8.9 10' Manual
1 8.9 20' Manual
CPES5-12 1/2 115 1 8.9 30' Manual
CPES5-13 1/2 115 1 8.9 50' Manual
CPES5-15 1/2 115 1 8.9 10' Wide-Angle Float
CPES5A-11 1/2 115 1 8.9 20' Wide-Angle Float
CPES5A-12 1/2 115 1 8.9 30' Wide-Angle Float
1 8.9 10' Vertical Float
CPES5A-13 1/2 115 1 8.9 20' Vertical Float
CPES5V-11 1/2 115 1 8.9 30' Vertical Float
CPES5V-12 1/2 115
CPES5V-13 1/2 115

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805 REV 0817
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

CPS3 1/3HP

SUMP/EFFLUENT

Every pump tested in water to ensure pump
meets peformance curve.

FEATURES/BENEFITS POWER CORD
Sealed entry quick disconnect power cords
PERFORMANCE - Prevents water from entering the motor
Heads up to 20’ TDH housing through a cut cord
Flows up to 42 GPM - Available in lengths up to 100’

MOTOR SWITCH
High efficient, 115v, oil filled, permanent split Piggy-back switch design
capacitor motor with upper and lower ball - Defective switches can be diagnosed over
bearings and thermal overload protection the phone
- Constant bearing lubrication - Pump can be operated manually or
- Maximum motor cooling supplied with other piggy-back switches
- Runs cooler and lasts longer - Switch can be replaced without having to
- Internal overload protection replace the pump
- Quiet operation
- Fasteners and shaft made from rugged,
corrosion resistant stainless steel APPLICATIONS
Basements, dewatering, and septic
systems
SEAL DESIGN
Mechanical with secondary dynamic lip seal
- P rovides added leakage protection

IMPELLER DESIGN
Non-clog style vortex impeller
- Designed to help reduce clogging by foreign
material

Wide-Angle Float Vertical Float

1/3 HP submersible pumps, built for reliability,
handle up to 1/4” solids with 1 1/2” discharge

PERFORMANCE CURVE

Total Head, TDH

CPS3

Gallons per Minute, GPM REV 0817

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

TECHNICAL DATA

DISCHARGE 1-1/2” NPT. vertical standard

SOLIDS HANDLING 1/4”

LIQUID TEMPERATURE 140 Degrees F. (Intermittent)

MOTOR HOUSING Cast Iron

VOLUTE Cast Iron

SEAL PLATE Cast Iron

IMPELLER Engineered glass filled thermoplastic/
Vortex

SHAFT Nickel plated steel

SHAFT SEAL (SINGLE SEAL) Mechanical with secondary dynamic
lip seal, carbon rotating face, ceramic
stationary face, Buna-N elastomer,
300 series stainless steel hardware

BEARINGS (UPPER & LOWER) Single row, ball, oil lubricated

HARDWARE 300 Series stainless steel

O-RINGS Buna-N

CORD 10’ Length standard. Up to 100’ available.
(UL/CUL) Listed 16 AWG, Type SJTW

MOTOR (SINGLE PHASE) 1/3 HP 1750 RPM, 60 Hz, NEMA L
Includes overload protection in the
motor, oil filled, class B permanent split
capacitor

WEIGHT 25 lbs. (Manual)

MODEL(S) INFORMATION

MODEL HP VOLTS PHASE AMPS CORD LENGTH SWITCH

CPS3-11 1/3 115 1 4 10' Manual
CPS3-12 1/3 115 1 4 20' Manual
CPS3-13 1/3 115 1 4 30' Manual
CPS3-15 1/3 115 1 4 50' Manual
CPS3A-11 1/3 115 1 4 10' Wide-Angle Float
CPS3A-12 1/3 115 1 4 20' Wide-Angle Float
CPS3A-13 1/3 115 1 4 30' Wide-Angle Float
CPS3V-11 1/3 115 1 4 10' Vertical Float
CPS3V-12 1/3 115 1 4 20' Vertical Float
CPS3V-13 1/3 115 1 4 30' Vertical Float

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805 REV 0817
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

CPS3VLT 1/3HP www.championpump.com
LAUNDRY TRAY

FEATURES/BENEFITS

• High Efficient Motor With Upper & Lower Ball Bearings/Runs
Cooler & Last Longer

• Vortex Impeller/ Helps Prevent Clogging
• Sealed Entry-Replaceable Power Cord/ Easy To Replace In The

Field, Prevents Water From Entering The Motor Housing Through
A Cut Power Cord
• Piggy-Back Switch Design/Defective Switches Can Be Diagnosed
By Phone; Pump Can Be Operated Manually by Overriding The
Switch
• Every Pump Is Tested In Water/Ensures That The Pump Meets
Head & Flow Requirements

APPLICATIONS

• Laundry Trays, Wet Bars, Utility Sinks,
Dehumidifying/Air Conditioning Units

CHAMPION PUMP - PUMP PERFORMANCECCPUSR3VPE erformance

25

20

Total Head, TDH 15

10

5

0
0 5 10 15 20 25 30 35 40 45

Gallons Per Minute, GPM

Model HP Volts Phase Amps Cord Length Switch

CPS3V-11 1/3 115 1 4.0 10 Vertical Float
CPS3V-12
1/3 115 1 4.0 20 Vertical Float

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805
Phone 419-281-4500 • Toll Free 800-659-4491 • Fax 419-616-1100

CPS5 1/2HP

FEATURES/BENEFITS IMPELLER DESIGN SUMP/EFFLUENT
Non-clog style, cast-iron vortex impeller
PERFORMANCE - Designed to help reduce clogging by foreign Every pump tested in water to ensure pump
Heads up to 28’ TDH material meets peformance curve.
Flows up to 85 GPM
1/2 HP submersible pumps that handle up to
MOTOR POWER CORD 1 1/4” solids with 2” discharge
High efficient, 115v or 230v, oil filled, Sealed entry quick disconnect power cords
permanent split capacitor motor with upper - Prevents water from entering the motor
and lower ball bearings and thermal overload housing through a cut cord
protection - Easy to replace in the field
- Constant bearing lubrication - Available in lengths up to 100’

- Maximum motor cooling SWITCH
- Runs cooler and lasts longer Piggy-back switch design
- Internal overload protection - Defective switches can be diagnosed over
- Quiet operation the phone
- Fasteners and shaft made from rugged, - Pump can be operated manually or
corrosion resistant stainless steel supplied with other piggy-back switches

SEAL DESIGN - Switch can be replaced without having to
Type 21 inboard seal design with secondary replace the pump

exclusion seal APPLICATIONS
- Rotating components of seal are in the Basements, dewatering, septic systems
motor housing, being lubricated by the
motor oil preventing foreign matter from and truck docks

wrapping around the seal components
- Seal will last longer if the pump runs dry
- Secondary exclusion seal keeps debris from
entering the seal cavity

PERFORMANCE CURVE

Total Head, TDH

CPS5

Gallons per Minute, GPM REV 0817

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

TECHNICAL DATA

DISCHARGE 2” NPT. vertical standard

SOLIDS HANDLING 1 1/4”

LIQUID TEMPERATURE 140 Degrees F. (Intermittent)

MOTOR HOUSING Cast Iron

VOLUTE Cast Iron

SEAL PLATE Cast Iron

IMPELLER Cast Iron / Vortex

SOLIDS HANDLING 1 1/4”

SHAFT Stainless Steel

SHAFT SEAL (SINGLE SEAL) Inboard mechanical with secondary
exclusion V-Seal, carbon rotating
face, ceramic stationary face, Buna-N
elastomer, 300 series stainless steel
hardware

BEARINGS (UPPER & LOWER) Single row, ball, oil lubricated

HARDWARE 300 Series stainless steel

O-RINGS Buna-N

CORD 10’ Length standard. Up to 100’ available.
(UL/CUL) Listed 16 AWG, Type SJTW

MOTOR (SINGLE PHASE) 1/2 HP 3450 RPM, 60 Hz, NEMA L
Includes overload protection in the
motor, oil filled, class B permanent split
capacitor

WEIGHT 39 lbs. (Manual)

MODEL(S) INFORMATION

MODEL HP VOLTS PHASE AMPS CORD LENGTH SWITCH

CPS5-11 1/2 115 1 8 10' Manual
CPS5-12
CPS5-13 1/2 115 1 8 20' Manual
CPS5-15
CPS5A-11 1/2 115 1 8 30' Manual
CPS5A-12
CPS5A-13 1/2 115 1 8 50' Manual
CPS5V-11
CPS5V-12 1/2 115 1 8 10' Wide-Angle Float
CPS5V-13
CPS5-22 1/2 115 1 8 20' Wide-Angle Float
CPS5A-22
CPS5V-22 1/2 115 1 8 30' Wide-Angle Float

1/2 115 1 8 10' Vertical Float

1/2 115 1 8 20' Vertical Float

1/2 115 1 8 30' Vertical Float

1/2 230 1 4 20' Manual

1/2 230 1 4 20' Wide-Angle Float

1/2 230 1 4 20' Vertical Float

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805 REV 0817
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

CPS5HT 1/2HP

HIGH TEMPERATURE

Every pump tested in water to ensure pump
meets peformance curve.

FEATURES/BENEFITS IMPELLER DESIGN
Non-clog style, cast-iron vortex impeller
PERFORMANCE - Designed to help reduce clogging by foreign
Heads up to 28’ TDH material
Flows up to 45 GPM

MOTOR POWER CORD
High efficient, 115v or 230v, oil filled, Sealed entry quick disconnect power cords
permanent split capacitor motor with upper - Prevents water from entering the motor
and lower ball bearings and thermal overload housing through a cut cord
protection - Easy to replace in the field
- Constant bearing lubrication - Available in lengths up to 30’
- Maximum motor cooling SWITCH
- Runs cooler and lasts longer Piggy-back switch design
- Internal overload protection - Defective switches can be diagnosed over
- Quiet operation the phone
- Designed for hot water applications up to - Pump can be operated manually or
185° supplied with other piggy-back switches
- Fasteners and shaft made from rugged, - Switch can be replaced without having to
corrosion resistant stainless steel replace the pump

SEAL DESIGN APPLICATIONS
Type 21 inboard seal design with secondary Boiler blow down, condensate pits and
exclusion seal hot water transfer
- Rotating components of seal are in the
motor housing, being lubricated by the 1/2 HP submersible high temperature pumps that
motor oil preventing foreign matter from handle up to 3/4” solids with 2” discharge
wrapping around the seal components
- Seal will last longer if the pump runs dry
- Secondary exclusion seal keeps debris from
entering the seal cavity

PERFORMANCE CURVE

Total Head, TDH

CPS5HT

Performance @ 185º

Gallons per Minute, GPM REV 0817

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

TECHNICAL DATA

DISCHARGE 2” NPT. vertical standard
SOLIDS HANDLING
LIQUID TEMPERATURE 3/4”
MOTOR HOUSING
VOLUTE 185 Degrees F. (Intermittent)
SEAL PLATE
IMPELLER Cast Iron
SHAFT
SHAFT SEAL (SINGLE SEAL) Cast Iron

BEARINGS (UPPER & LOWER) Cast Iron
HARDWARE
O-RINGS Cast Iron / Vortex
CORD
Stainless Steel
MOTOR (SINGLE PHASE)
Inboard mechanical with secondary
WEIGHT exclusion V-Seal, carbon rotating
face, ceramic stationary face, Buna-N
elastomer, 300 series stainless steel
hardware

Single row, ball, oil lubricated

300 Series stainless steel

Buna-N

20’ Length standard. Up to 30’ available.
(UL/CUL) Listed 16 AWG, Type SJTW

1/2 HP 3450 RPM, 60 Hz, NEMA L
Includes overload protection in the
motor, oil filled, class B permanent split
capacitor

39 lbs. (Manual)

MODEL(S) INFORMATION

MODEL HP VOLTS PHASE AMPS CORD LENGTH SWITCH

CPS5HT-11 1/2 115 1 5.8 10' Manual
1 5.8 20' Manual
CPS5HT-12 1/2 115 1 5.8 30' Manual
CPS5HT-13 1/2 115 1 5.8 10' Wide-Angle Float
CPS5HTA-11 1/2 115 1 5.8 20' Wide-Angle Float
CPS5HTA-12 1/2 115 1 5.8 30' Wide-Angle Float
CPS5HTA-13 1/2 115

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805 REV 0817
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

CPS33 1/3HP

SUMP/EFFLUENT

FEATURES/BENEFITS POWER CORD Every pump tested in water to ensure pump
Sealed entry quick disconnect power cords meets peformance curve.
PERFORMANCE - P revents water from entering the motor
Heads up to 20’ TDH housing through a cut cord Wide-Angle Float
Flows up to 42 GPM - A vailable in lengths up to 100’

MOTOR SWITCH
High efficient, 115v, oil filled, permanent split Integrated quick disconnect switch design
capacitor motor with upper and lower ball - Switch can be replaced without having to
bearings and thermal overload protection replace the pump
- Constant bearing lubrication
- M aximum motor cooling
- Runs cooler and lasts longer APPLICATIONS
- Internal overload protection Basements, dewatering, and septic
systems
- Quiet operation
- F asteners and shaft made from rugged,
corrosion resistant stainless steel

SEAL DESIGN
Mechanical with secondary dynamic lip seal
- P rovides added leakage protection

IMPELLER DESIGN
Non-clog style vortex impeller
- D esigned to help reduce clogging by foreign
material

Vertical Float

1/3 HP submersible pumps, built for reliability,
handle up to 1/4” solids with 1 1/2” discharge

PERFORMANCE CURVE

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805 REV 1017
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

TECHNICAL DATA

DISCHARGE 1-1/2” NPT. vertical standard

SOLIDS HANDLING 1/4”

LIQUID TEMPERATURE 140 Degrees F. (Intermittent)

MOTOR HOUSING Cast Iron

VOLUTE Cast Iron

SEAL PLATE Cast Iron

IMPELLER Engineered glass filled thermoplastic/
Vortex

SHAFT Nickel plated steel

SHAFT SEAL (SINGLE SEAL) Mechanical with secondary dynamic
lip seal, carbon rotating face, ceramic
stationary face, Buna-N elastomer,
300 series stainless steel hardware

BEARINGS (UPPER & LOWER) Single row, ball, oil lubricated

HARDWARE 300 Series stainless steel

O-RINGS Buna-N

CORD 10’ Length standard. Up to 100’ available.
(UL/CUL) Listed 16 AWG, Type SJTW

MOTOR (SINGLE PHASE) 1/3 HP 1750 RPM, 60 Hz, NEMA L
Includes overload protection in the
motor, oil filled, class B permanent split
capacitor

WEIGHT 25 lbs. (Manual)

MODEL(S) INFORMATION

MODEL HP VOLTS PHASE AMPS CORD LENGTH SWITCH

CPS33-11 1/3 115 1 4 10' Manual
CPS33-12 1/3 115 1 4 20' Manual
CPS33-13 1/3 115 1 4 30' Manual
CPS33-15 1/3 115 1 4 50' Manual
CPS33A-11 1/3 115 1 4 10' Wide-Angle Float
CPS33A-12 1/3 115 1 4 20' Wide-Angle Float
CPS33A-13 1/3 115 1 4 30' Wide-Angle Float
CPS33V-11 1/3 115 1 4 10' Vertical Float
CPS33V-12 1/3 115 1 4 20' Vertical Float
CPS33V-13 1/3 115 1 4 30' Vertical Float

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805 REV 1017
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

CPU16 1/6HP
UTILITY

FEATURES/BENEFITS

• 1/6HP PSC Motor
• Upper & Lower Ball Bearings
• Plastic Corrosion Resistant Housing
• Secondary Screen
• Pumps Down To 1/8” Without Secondary Screen

SPECIFICATIONS 3/4” GHT www.championpump.com
140 Degrees F. (Intermittent)
DISCHARGE Nylon + 30% Fiber Glass
LIQUID TEMPERATURE 10’ Length
IMPELLER
CORD

CHAMPION PUMP - PUMP PERFORMANCCEPCUUR1V6EPerformance

30

25

Total Head, TDH 20

15

10

5

0
0 5 10 15 20

Gallons Per Minute, GPM

Model HP Volts Phase Amps Cord Length Switch

CPU16-11 1/6 115 1 2.0 10 Manual

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805
Phone 419-281-4500 • Toll Free 800-659-4491 • Fax 419-616-1100

CPE 4/10 - 1/2HP

EFFLUENT

Every pump tested in water to ensure pump
meets peformance curve.

FEATURES/BENEFITS IMPELLER DESIGN
Non-clog style, cast-iron vortex impeller
PERFORMANCE (CPEH Thermoplastic Vortex)
Heads up to 65’ TDH - Designed to help reduce clogging by foreign
Flows up to 86 GPM material

MOTOR POWER CORD
High efficient, 115v or 230v, oil filled, Sealed entry quick disconnect power cords
permanent split capacitor motor with upper - Prevents water from entering the motor
and lower ball bearings and thermal overload housing through a cut cord
protection - Easy to replace in the field
- C onstant bearing lubrication - A vailable in lengths up to 100’
- M aximum motor cooling
- R uns cooler and lasts longer
- Internal overload protection SWITCH
- Q uiet operation Piggy-back switch design
- F asteners and shaft made from rugged, - D efective switches can be diagnosed over
corrosion resistant stainless steel the phone
- Pump can be operated manually or
supplied with other piggy-back switches
SEAL DESIGN - Switch can be replaced without having to
Type 21 inboard seal design with secondary replace the pump
exclusion seal
- R otating components of seal are in the
motor housing, being lubricated by the APPLICATIONS
motor oil preventing foreign matter from Dewatering, septic systems, residential
and commercial developments, elevator
wrapping around the seal components pits and STEP systems
- Seal will last longer if the pump runs dry
- Secondary exclusion seal keeps debris from Vertical Float Wide-Angle Float

entering the seal cavity 4/10-1/2 HP submersible pumps that handle up to

3/4” solids with 2” discharge

PERFORMANCE CURVE

Total Head, TDH

CPEH5

CPE4 CPE5 CPE55

Gallons per Minute, GPM REV 1017

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

TECHNICAL DATA

DISCHARGE 2” NPT. vertical standard

LIQUID TEMPERATURE 140 Degrees F. (Intermittent)

MOTOR HOUSING Cast Iron

VOLUTE Cast Iron

SEAL PLATE Cast Iron

IMPELLER Cast Iron / Vortex (CPEH thermoplastic
vortex)

SOLIDS HANDLING 3/4”

SHAFT Stainless Steel

SHAFT SEAL (SINGLE SEAL) Inboard mechanical with secondary
exclusion V-Seal, carbon rotating face,
ceramic stationary face, Buna-N elastomer,
300 series stainless steel hardware

BEARINGS (UPPER & LOWER) Single row, ball, oil lubricated

HARDWARE 300 Series stainless steel

O-RINGS Buna-N

CORD 20’ Length standard. Up to 100’ available.
(UL/CUL) Listed 16 AWG, Type SJTW

MOTOR (SINGLE PHASE) 4/10-1/2 HP 3450 RPM, 60 Hz, NEMA L
Includes Overload Protection in the motor,
oil filled, class B permanent split capacitor

WEIGHT 37 lbs. (Manual)

MODEL(S) INFORMATION HP VOLTS PHASE AMPS CORD SWITCH
6.6 / 8.5 / 10.5 / 11.5 LENGTH Manual
MODEL 4/10 - 1/2 115 1 6.6 / 8.5 / 10.5 / 11.5 Manual
CPE4-12 / CPE5-12 / CPE55-12 /CPEH5-12 6.6 / 8.5 / 10.5 / 11.5 20' Manual
CPE4-13 / CPE5-13 / CPE55-13 / CPEH5-13 4/10 - 1/2 115 1 6.6 / 8.5 / 10.5 / 11.5 30' Wide-Angle Float
CPE4-15 / CPE5-15 / CPE55-15 / CPEH5-15 6.6 / 8.5 / 10.5 / 11.5 50' Wide-Angle Float
CPE4A-12 / CPE5A-12 / CPE55A-12 / CPEH5A-12 4/10 - 1/2 115 1 6.6 / 8.5 / 10.5 / 11.5 20' Vertical Float
CPE4A-13 / CPE5A-13 / CPE55A-13 / CPEH5A-13 6.6 / 8.5 / 10.5 / 11.5 30' Vertical Float
CPE4V-12 / CPE5V-12 / CPE55V-12 / CPEH5V-12 4/10 - 1/2 115 1 3.3 / 4.3 / 5.75 / 5.75 20' Manual
CPE4V-13 / CPE5V-13 / CPE55V-13 / CPEH5V-13 3.3 / 4.3 / 5.75 / 5.75 30' Wide-Angle Float
CPE4-22 / CPE5-22 / CPE55-22 / CPEH5-22 4/10 - 1/2 115 1 3.3 / 4.3 / 5.75 / 5.75 20' Vertical Float
CPE4A-22 / CPE5A-22 / CPE55A-22 / CPEH5A-22 20'
CPE4V-22 / CPE5V-22 / CPE55V-22 / CPEH5V-22 4/10 - 1/2 115 1 20'

4/10 - 1/2 115 1

4/10 - 1/2 230 1

4/10 - 1/2 230 1

4/10 - 1/2 230 1

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805 REV 1017
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

CPES5 1/2HP

EFFLUENT/SUMP

Every pump tested in water to ensure pump
meets peformance curve.

FEATURES/BENEFITS POWER CORD

PERFORMANCE Sealed entry quick disconnect power cords
Heads up to 37’ TDH - Prevents water from entering the motor
Flows up to 72 GPM housing through a cut cord
- Easy to replace in the field
- Available in lengths up to 100’
MOTOR
High efficient, 115v, oil filled, permanent split
capacitor motor with upper and lower ball SWITCH
bearings and thermal overload protection Piggy-back switch design
- Constant bearing lubrication - Defective switches can be diagnosed over
- Maximum motor cooling the phone
- Runs cooler and lasts longer - Pump can be operated manually or
- Internal overload protection supplied with other piggy-back switches
- Quiet operation - Switch can be replaced without having to
- Fasteners and shaft made from rugged, replace the pump

corrosion resistant stainless steel APPLICATIONS

SEAL DESIGN Basements, dewatering, septic systems,
Mechanical with secondary dynamic lip seal residential and commercial
developments and elevator pits
- Provides added leakage protection

IMPELLER DESIGN
Non-clog style vortex impeller
- Designed to help reduce clogging by foreign
material

Wide-Angle Float Vertical Float

1/2 HP submersible pumps that handle up to 3/4”
solids with 2’’ discharge with 1 1/2” adapter

PERFORMANCE CURVE

Total Head, TDH

CPES5

Gallons per Minute, GPM REV 0817

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

TECHNICAL DATA

DISCHARGE 2” NPT. with 1-1/2” adapter included

SOLIDS HANDLING 3/4”

LIQUID TEMPERATURE 140 Degrees F. (Intermittent)

MOTOR HOUSING Cast Iron

VOLUTE Engineered glass filled thermoplastic

SEAL PLATE Cast Iron

IMPELLER Engineered glass filled thermoplastic/
Vortex

SHAFT Stainless Steel

SHAFT SEAL (SINGLE SEAL) Mechanical with secondary dynamic
lip seal, carbon rotating face, ceramic
stationary face, Buna-N elastomer,
300 series stainless steel hardware

BEARINGS (UPPER & LOWER) Single row, ball, oil lubricated

HARDWARE 300 Series stainless steel

O-RINGS Buna-N

CORD 10’ Length standard. Up to 100’ available.
(UL/CUL) Listed 16 AWG, Type SJTW

MOTOR (SINGLE PHASE) 1/2 HP 3450 RPM, 60 Hz, NEMA L
Includes overload protection in the
motor, oil filled, class B permanent split
capacitor

WEIGHT 25 lbs. (Manual)

MODEL(S) INFORMATION

MODEL HP VOLTS PHASE AMPS CORD LENGTH SWITCH

CPES5-11 1/2 115 1 8.9 10' Manual
1 8.9 20' Manual
CPES5-12 1/2 115 1 8.9 30' Manual
CPES5-13 1/2 115 1 8.9 50' Manual
CPES5-15 1/2 115 1 8.9 10' Wide-Angle Float
CPES5A-11 1/2 115 1 8.9 20' Wide-Angle Float
CPES5A-12 1/2 115 1 8.9 30' Wide-Angle Float
1 8.9 10' Vertical Float
CPES5A-13 1/2 115 1 8.9 20' Vertical Float
CPES5V-11 1/2 115 1 8.9 30' Vertical Float
CPES5V-12 1/2 115
CPES5V-13 1/2 115

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805 REV 0817
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

CPS3 1/3HP

SUMP/EFFLUENT

Every pump tested in water to ensure pump
meets peformance curve.

FEATURES/BENEFITS POWER CORD
Sealed entry quick disconnect power cords
PERFORMANCE - Prevents water from entering the motor
Heads up to 20’ TDH housing through a cut cord
Flows up to 42 GPM - Available in lengths up to 100’

MOTOR SWITCH
High efficient, 115v, oil filled, permanent split Piggy-back switch design
capacitor motor with upper and lower ball - Defective switches can be diagnosed over
bearings and thermal overload protection the phone
- Constant bearing lubrication - Pump can be operated manually or
- Maximum motor cooling supplied with other piggy-back switches
- Runs cooler and lasts longer - Switch can be replaced without having to
- Internal overload protection replace the pump
- Quiet operation
- Fasteners and shaft made from rugged,
corrosion resistant stainless steel APPLICATIONS
Basements, dewatering, and septic
systems
SEAL DESIGN
Mechanical with secondary dynamic lip seal
- P rovides added leakage protection

IMPELLER DESIGN
Non-clog style vortex impeller
- Designed to help reduce clogging by foreign
material

Wide-Angle Float Vertical Float

1/3 HP submersible pumps, built for reliability,
handle up to 1/4” solids with 1 1/2” discharge

PERFORMANCE CURVE

Total Head, TDH

CPS3

Gallons per Minute, GPM REV 0817

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

TECHNICAL DATA

DISCHARGE 1-1/2” NPT. vertical standard

SOLIDS HANDLING 1/4”

LIQUID TEMPERATURE 140 Degrees F. (Intermittent)

MOTOR HOUSING Cast Iron

VOLUTE Cast Iron

SEAL PLATE Cast Iron

IMPELLER Engineered glass filled thermoplastic/
Vortex

SHAFT Nickel plated steel

SHAFT SEAL (SINGLE SEAL) Mechanical with secondary dynamic
lip seal, carbon rotating face, ceramic
stationary face, Buna-N elastomer,
300 series stainless steel hardware

BEARINGS (UPPER & LOWER) Single row, ball, oil lubricated

HARDWARE 300 Series stainless steel

O-RINGS Buna-N

CORD 10’ Length standard. Up to 100’ available.
(UL/CUL) Listed 16 AWG, Type SJTW

MOTOR (SINGLE PHASE) 1/3 HP 1750 RPM, 60 Hz, NEMA L
Includes overload protection in the
motor, oil filled, class B permanent split
capacitor

WEIGHT 25 lbs. (Manual)

MODEL(S) INFORMATION

MODEL HP VOLTS PHASE AMPS CORD LENGTH SWITCH

CPS3-11 1/3 115 1 4 10' Manual
CPS3-12 1/3 115 1 4 20' Manual
CPS3-13 1/3 115 1 4 30' Manual
CPS3-15 1/3 115 1 4 50' Manual
CPS3A-11 1/3 115 1 4 10' Wide-Angle Float
CPS3A-12 1/3 115 1 4 20' Wide-Angle Float
CPS3A-13 1/3 115 1 4 30' Wide-Angle Float
CPS3V-11 1/3 115 1 4 10' Vertical Float
CPS3V-12 1/3 115 1 4 20' Vertical Float
CPS3V-13 1/3 115 1 4 30' Vertical Float

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805 REV 0817
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

CPS5 1/2HP

FEATURES/BENEFITS IMPELLER DESIGN SUMP/EFFLUENT
Non-clog style, cast-iron vortex impeller
PERFORMANCE - Designed to help reduce clogging by foreign Every pump tested in water to ensure pump
Heads up to 28’ TDH material meets peformance curve.
Flows up to 85 GPM
1/2 HP submersible pumps that handle up to
MOTOR POWER CORD 1 1/4” solids with 2” discharge
High efficient, 115v or 230v, oil filled, Sealed entry quick disconnect power cords
permanent split capacitor motor with upper - Prevents water from entering the motor
and lower ball bearings and thermal overload housing through a cut cord
protection - Easy to replace in the field
- Constant bearing lubrication - Available in lengths up to 100’

- Maximum motor cooling SWITCH
- Runs cooler and lasts longer Piggy-back switch design
- Internal overload protection - Defective switches can be diagnosed over
- Quiet operation the phone
- Fasteners and shaft made from rugged, - Pump can be operated manually or
corrosion resistant stainless steel supplied with other piggy-back switches

SEAL DESIGN - Switch can be replaced without having to
Type 21 inboard seal design with secondary replace the pump

exclusion seal APPLICATIONS
- Rotating components of seal are in the Basements, dewatering, septic systems
motor housing, being lubricated by the
motor oil preventing foreign matter from and truck docks

wrapping around the seal components
- Seal will last longer if the pump runs dry
- Secondary exclusion seal keeps debris from
entering the seal cavity

PERFORMANCE CURVE

Total Head, TDH

CPS5

Gallons per Minute, GPM REV 0817

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

TECHNICAL DATA

DISCHARGE 2” NPT. vertical standard

SOLIDS HANDLING 1 1/4”

LIQUID TEMPERATURE 140 Degrees F. (Intermittent)

MOTOR HOUSING Cast Iron

VOLUTE Cast Iron

SEAL PLATE Cast Iron

IMPELLER Cast Iron / Vortex

SOLIDS HANDLING 1 1/4”

SHAFT Stainless Steel

SHAFT SEAL (SINGLE SEAL) Inboard mechanical with secondary
exclusion V-Seal, carbon rotating
face, ceramic stationary face, Buna-N
elastomer, 300 series stainless steel
hardware

BEARINGS (UPPER & LOWER) Single row, ball, oil lubricated

HARDWARE 300 Series stainless steel

O-RINGS Buna-N

CORD 10’ Length standard. Up to 100’ available.
(UL/CUL) Listed 16 AWG, Type SJTW

MOTOR (SINGLE PHASE) 1/2 HP 3450 RPM, 60 Hz, NEMA L
Includes overload protection in the
motor, oil filled, class B permanent split
capacitor

WEIGHT 39 lbs. (Manual)

MODEL(S) INFORMATION

MODEL HP VOLTS PHASE AMPS CORD LENGTH SWITCH

CPS5-11 1/2 115 1 8 10' Manual
CPS5-12
CPS5-13 1/2 115 1 8 20' Manual
CPS5-15
CPS5A-11 1/2 115 1 8 30' Manual
CPS5A-12
CPS5A-13 1/2 115 1 8 50' Manual
CPS5V-11
CPS5V-12 1/2 115 1 8 10' Wide-Angle Float
CPS5V-13
CPS5-22 1/2 115 1 8 20' Wide-Angle Float
CPS5A-22
CPS5V-22 1/2 115 1 8 30' Wide-Angle Float

1/2 115 1 8 10' Vertical Float

1/2 115 1 8 20' Vertical Float

1/2 115 1 8 30' Vertical Float

1/2 230 1 4 20' Manual

1/2 230 1 4 20' Wide-Angle Float

1/2 230 1 4 20' Vertical Float

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805 REV 0817
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

CPS33 1/3HP

SUMP/EFFLUENT

FEATURES/BENEFITS POWER CORD Every pump tested in water to ensure pump
Sealed entry quick disconnect power cords meets peformance curve.
PERFORMANCE - P revents water from entering the motor
Heads up to 20’ TDH housing through a cut cord Wide-Angle Float
Flows up to 42 GPM - A vailable in lengths up to 100’

MOTOR SWITCH
High efficient, 115v, oil filled, permanent split Integrated quick disconnect switch design
capacitor motor with upper and lower ball - Switch can be replaced without having to
bearings and thermal overload protection replace the pump
- Constant bearing lubrication
- M aximum motor cooling
- Runs cooler and lasts longer APPLICATIONS
- Internal overload protection Basements, dewatering, and septic
systems
- Quiet operation
- F asteners and shaft made from rugged,
corrosion resistant stainless steel

SEAL DESIGN
Mechanical with secondary dynamic lip seal
- P rovides added leakage protection

IMPELLER DESIGN
Non-clog style vortex impeller
- D esigned to help reduce clogging by foreign
material

Vertical Float

1/3 HP submersible pumps, built for reliability,
handle up to 1/4” solids with 1 1/2” discharge

PERFORMANCE CURVE

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805 REV 1017
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

TECHNICAL DATA

DISCHARGE 1-1/2” NPT. vertical standard

SOLIDS HANDLING 1/4”

LIQUID TEMPERATURE 140 Degrees F. (Intermittent)

MOTOR HOUSING Cast Iron

VOLUTE Cast Iron

SEAL PLATE Cast Iron

IMPELLER Engineered glass filled thermoplastic/
Vortex

SHAFT Nickel plated steel

SHAFT SEAL (SINGLE SEAL) Mechanical with secondary dynamic
lip seal, carbon rotating face, ceramic
stationary face, Buna-N elastomer,
300 series stainless steel hardware

BEARINGS (UPPER & LOWER) Single row, ball, oil lubricated

HARDWARE 300 Series stainless steel

O-RINGS Buna-N

CORD 10’ Length standard. Up to 100’ available.
(UL/CUL) Listed 16 AWG, Type SJTW

MOTOR (SINGLE PHASE) 1/3 HP 1750 RPM, 60 Hz, NEMA L
Includes overload protection in the
motor, oil filled, class B permanent split
capacitor

WEIGHT 25 lbs. (Manual)

MODEL(S) INFORMATION

MODEL HP VOLTS PHASE AMPS CORD LENGTH SWITCH

CPS33-11 1/3 115 1 4 10' Manual
CPS33-12 1/3 115 1 4 20' Manual
CPS33-13 1/3 115 1 4 30' Manual
CPS33-15 1/3 115 1 4 50' Manual
CPS33A-11 1/3 115 1 4 10' Wide-Angle Float
CPS33A-12 1/3 115 1 4 20' Wide-Angle Float
CPS33A-13 1/3 115 1 4 30' Wide-Angle Float
CPS33V-11 1/3 115 1 4 10' Vertical Float
CPS33V-12 1/3 115 1 4 20' Vertical Float
CPS33V-13 1/3 115 1 4 30' Vertical Float

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805 REV 1017
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

CPSTEP 1/2 - 2HP

EFFLUENT

Every pump tested in water to ensure pump
meets peformance curve.

FEATURES/BENEFITS IMPELLER DESIGN
1 or 2 vane cast iron impeller
PERFORMANCE - Designed to help reduce clogging by foreign
Heads up to 124’ TDH material
Flows up to 122 GPM

MOTOR (Single Phase) POWER CORD
High efficient, 115v or 230v, oil filled, Sealed entry quick disconnect power cords
permanent split capacitor motor with upper - Prevents water from entering the motor
and lower ball bearings and thermal overload housing through a cut cord
protection - Easy to replace in the field
- Constant bearing lubrication - Available in lengths up to 100’

- Maximum motor cooling SWITCH
- Runs cooler and lasts longer Piggy-back switch design (Single Phase)
- Internal overload protection - Defective switches can be diagnosed over
- Quiet operation the phone
- Fasteners and shaft made from rugged, - Pump can be operated manually or
corrosion resistant stainless steel supplied with other piggy-back switches

SEAL DESIGN - Switch can be replaced without having to
Single, mechanical, oil filled chamber replace the pump

- Optional double seal series models

APPLICATIONSavailable that provides additional protection
and moisture sensing capabilities Dewatering, septic systems, residential
and commercial developments, elevator
- Optional seal failure feature that will alert pits and STEP systems
you when the seal has failed

1/2-2 HP high head effluent pumps that handle
up to 3/4” solids with 2” discharge

PERFORMANCE CURVE

Total Head, TDH

CPSTEP5 CPSTEP10 CPSTEP15 CPSTEP20

Gallons per Minute, GPM REV 0817

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

TECHNICAL DATA

DISCHARGE 2” NPT. vertical standard SINGLE SEAL
SOLIDS HANDLING DOUBLE SEAL
LIQUID TEMPERATURE 3/4”
MOTOR HOUSING
VOLUTE 140 Degrees F. (Intermittent)
SEAL PLATE
IMPELLER Cast Iron
SHAFT
SHAFT SEAL (SINGLE SEAL) Cast Iron

SHAFT SEAL (DOUBLE SEAL) Cast Iron

BEARINGS (UPPER & LOWER) Cast Iron / 1 or 2 Vane
HARDWARE
O-RINGS Stainless Steel
CORD
Single mechanical, carbon rotating
MOTOR (SINGLE PHASE) face, ceramic stationary face, Buna-N
elastomer, 300 series stainless steel
MOTOR (THREE PHASE) hardware

WEIGHT Tandem double mechanical upper &
lower, carbon ceramic, Buna-N
elastomer, 300 stainless steel hardware

Single row, ball, oil lubricated

300 Series stainless steel

Buna-N

20’ Length standard. Up to 100’ available.
UL/CSA (SJOW) 14/3 (.375 OD)
Quick disconnect pin terminals *UL/CSA
(SO) Cord 14 Ga. (.60 OD)

1/2-2 HP 3450 RPM. 60 Hz,
Includes overload protection in the
motor, oil filled, class F permanent split
capacitor

1/2-2 HP 3450 RPM. 60 Hz, oil filled,
requires overload protection to be
included in control panel

72 lbs. (Manual)

MODEL(S) INFORMATION

MODEL HP VOLTS PHASE AMPS CORD LENGTH SWITCH REQUIRES PANEL

CPSTEP512(A) 1/2 115 1 13.8 20' M (Wide-Angle Float) No
CPSTEP522(A) 1/2 230 1 6.9 20' M (Wide-Angle Float) No
CPSTEP532 1/2 230 3 4.6 20' Yes
CPSTEP542 1/2 460 3 2.3 20' Manual Yes
CPSTEP1022(A) 1 230 1 10.4 20' Manual No
CPSTEP1032 1 230 3 7.6 20' M (Wide-Angle Float) Yes
CPSTEP1042 1 460 3 3.8 20' Manual Yes
CPSTEP1522(A) 1-1/2 230 1 12 20' Manual No
CPSTEP1532 1-1/2 230 3 8.4 20' M (Wide-Angle Float) Yes
CPSTEP1542 1-1/2 460 3 4.2 20' Manual Yes
CPSTEP2022(A) 2 230 1 14.8 20' Manual No
CPSTEP2032 2 230 3 11 20' M (Wide-Angle Float) Yes
CPSTEP2042 2 460 3 5.5 20' Manual Yes
Manual

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805 REV 0817
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

CPEW 1/2HP

SEWAGE

Every pump tested in water to ensure pump
meets peformance curve.

FEATURES/BENEFITS POWER CORD

PERFORMANCE Sealed entry quick disconnect power cords
Heads up to 23’ TDH - Prevents water from entering the motor
Flows up to 90 GPM housing through a cut cord
- E asy to replace in the field
- A vailable in lengths up to 100’
MOTOR
High efficient, 115v, oil filled, permanent split
capacitor motor with upper and lower ball SWITCH
bearings and thermal overload protection Piggy-back switch design
- C onstant bearing lubrication - D efective switches can be diagnosed over
- Maximum motor cooling the phone
- Runs cooler and lasts longer - P ump can be operated manually or
- I nternal overload protection supplied with other piggy-back switches
- Quiet operation - S witch can be replaced without having to
- F asteners and shaft made from rugged, replace the pump

corrosion resistant stainless steel APPLICATIONS

SEAL DESIGN Basements, dewatering, septic systems,
Mechanical with secondary dynamic lip seal sewage lift stations, add-a-baths and
truck docks
- Provides added leakage protection

IMPELLER DESIGN
Non-clog style vortex impeller
- D esigned to help reduce clogging by foreign
material

Wide-Angle Float Vertical Float

1/2 HP submersible pumps that handle up to
2” solids with 2’’ discharge

PERFORMANCE CURVE

Total Head, TDH

CPEW5 REV 1117

Gallons per Minute, GPM

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

TECHNICAL DATA

DISCHARGE 2” NPT. vertical standard

SOLIDS HANDLING 2”

LIQUID TEMPERATURE 140 Degrees F. (Intermittent)

MOTOR HOUSING Cast Iron

VOLUTE Engineered glass filled thermoplastic

SEAL PLATE Cast Iron

IMPELLER Engineered glass filled thermoplastic/
Vortex

SHAFT Stainless Steel

SHAFT SEAL (SINGLE SEAL) Mechanical with secondary dynamic
lip seal, carbon rotating face, ceramic
stationary face, Buna-N elastomer,
300 series stainless steel hardware

BEARINGS (UPPER & LOWER) Single row, ball, oil lubricated

HARDWARE 300 Series stainless steel

O-RINGS Buna-N

CORD 10’ Length standard. Up to 100’ available.
(UL/CUL) Listed 16 AWG, Type SJTW

MOTOR (SINGLE PHASE) 1/2 HP 3450 RPM, 60 Hz, NEMA L
Includes overload protection in the
motor, oil filled, class B permanent split
capacitor

WEIGHT 25 lbs. (Manual)

MODEL(S) INFORMATION

MODEL HP VOLTS PHASE AMPS CORD LENGTH SWITCH

CPEW5-11 1/2 115 1 9.5 10' Manual
CPEW5-12 1/2 115 1 9.5 20' Manual
CPEW5-13 1/2 115 1 9.5 30' Manual
CPEW5-15 1/2 115 1 9.5 50' Manual
CPEW5A-11 1/2 115 1 9.5 10' Wide-Angle Float
CPEW5A-12 1/2 115 1 9.5 20' Wide-Angle Float
CPEW5A-13 1/2 115 1 9.5 30' Wide-Angle Float
CPEW5V-11 1/2 115 1 9.5 10' Vertical Float
CPEW5V-12 1/2 115 1 9.5 20' Vertical Float
CPEW5V-13 1/2 115 1 9.5 30' Vertical Float

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805 REV 1117
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

CPSE(F) 1/2 - 2HP

SEWAGE

Every pump tested in water to ensure pump
meets peformance curve.

FEATURES/BENEFITS IMPELLER DESIGN
2 vane, cast iron impeller
PERFORMANCE - Designed to help reduce clogging by foreign
Heads up to 80’ TDH material
Flows up to 222 GPM

MOTOR (Single Phase) POWER CORD
High efficient, 115v or 230v, oil filled, Sealed entry quick disconnect power cords
permanent split capacitor motor with upper - Prevents water from entering the motor
and lower ball bearings and thermal overload housing through a cut cord
protection - Easy to replace in the field
- Constant bearing lubrication - Available in lengths up to 100’

- Maximum motor cooling SWITCH
- Runs cooler and lasts longer Piggy-back switch design (Single Phase)
- Internal overload protection - Defective switches can be diagnosed over
- Quiet operation the phone
- Fasteners and shaft made from rugged, - Pump can be operated manually or
corrosion resistant stainless steel supplied with other piggy-back switches

SEAL DESIGN - Switch can be replaced without having to
Single, mechanical, oil filled chamber replace the pump

- Optional double series models available APPLICATIONS
that provides additional protection and Residential developments, commercial
optional moisture sensing capabilities
- Optional seal failure feature that will alert developments and wastewater
applications
you when the seal has failed

1/2-2 HP cast iron sewage pumps that handle up
to 2” solids with 2” or 3” discharge

PERFORMANCE CURVE

Total Head, TDH CPSE20

CPSE15
CPSE10

CPSE5

CPSEF20

CPSEF7 CPSEF10

Gallons per Minute, GPM REV 0817

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

TECHNICAL DATA

DISCHARGE 2” NPT. vertical standard, 3” optional

SOLIDS HANDLING 2”

LIQUID TEMPERATURE 140 Degrees F. (Intermittent)

MOTOR HOUSING Cast Iron

VOLUTE Cast Iron

SEAL PLATE Cast Iron SINGLE SEAL
DOUBLE SEAL
IMPELLER Cast Iron / 2 Vane

SHAFT Stainless Steel

SHAFT SEAL (SINGLE SEAL) Single mechanical, carbon rotating
face, ceramic stationary face, Buna-N
elastomer, 300 series stainless steel
hardware

SHAFT SEAL (DOUBLE SEAL) Tandem double mechanical upper &
lower, carbon ceramic, Buna-N
elastomer, 300 stainless steel hardware

BEARINGS (UPPER &LOWER) Single row, ball, oil lubricated

HARDWARE 300 Series stainless steel

O-RINGS Buna-N

CORD 20’ Length standard. Up to 100’ available.
UL/CSA (SJOW) 14/3 (.375 OD)
Quick disconnect pin terminals *UL/CSA
(SO) Cord 14 Ga. (.60 OD)

MOTOR (SINGLE PHASE) 1/2-2 HP 3450 RPM. 60 Hz, Includes
Overload Protection in the Motor. Oil
Filled, Class F Permanent Split Capacitor

MOTOR (THREE PHASE) 1/2-2 HP 3450 RPM. 60 Hz, oil filled,
requires overload protection to be
included in control panel

WEIGHT 80 lbs. (Manual)

MODEL(S) INFORMATION

MODEL HP VOLTS PHASE AMPS CORD LENGTH SWITCH REQUIRES PANEL
CPSE512(A) 1/2 115 1 14.5 20' M(Wide-Angle Float) No
CPSE522(A) 1/2 230 1 7.3 20' M(Wide-Angle Float) No
CPSE532 1/2 230 3 5.3 20' Yes
CPSE542 1/2 460 3 2.7 20' Manual Yes
CPSEF712(A) 3/4 115 1 12 20' Manual No
CPSEF722(A) 3/4 230 1 20' M(Wide-Angle Float) No
CPSEF732 3/4 230 3 6 20' M(Wide-Angle Float) Yes
CPSEF742 3/4 460 3 5 20' Manual Yes
CPSE1022(A) / CPSEF1022(A) 230 1 2.5 20' Manual No
CPSE1032 / CPSEF1032 1 230 3 10.4 / 11 20' M(Wide-Angle Float) Yes
CPSE1042 / CPSEF1042 1 460 3 7.6 / 8 20' Manual Yes
CPSE1522(A) 1 230 1 3.8 / 4 20' Manual No
CPSE1532 1-1/2 230 3 13.3 20' M(Wide-Angle Float) Yes
CPSE1542 1-1/2 460 3 9.5 20' Manual Yes
CPSE2022(A) / CPSEF2022(A) 1-1/2 230 1 4.8 20' Manual No
CPSE2032 / CPSEF2032 2 230 3 14.8 20' M(Wide-Angle Float) Yes
CPSE2042 / CPSEF2042 2 460 3 11 20' Manual Yes
2 5.5 Manual

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805 REV 0817
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

CPSE 1.5, 2, 3HP

Submersible Sewage

DISCHARGE 3” NPT Female, Vertical bolt on CPSE1524, CPSE1594 www.championpump.com
LIQUID flange CPSE1544, CPSE2024,
TEMPERATURE CPSE2094, CPSE2044
MOTOR HOUSING 104°F Continuous CPSE3024, CPSE3094
VOLUTE
IMPELLER Cast Iron, Class 30 CPSE3044
SOLIDS HANDLING Cast Iron, Class 30
SHAFT 2 vane open type, Cast Iron, Class 30 1750 RPM • 60 Hz
SEALPLATE 2-1/2” spherical
SQUARE RINGS Stainless steel
HARDWARE Cast Iron, Class 30
SEAL Buna-N
UPPER BEARING Stainless steel
LOWER BEARING Inboard, Single mechanical, Oil Filled
POWER CORD Silicon Carbide
Single row, ball, oil lubricated
MOTOR Single row, ball, oil lubricated
25 Ft. Cord. Pressure grommet for
SINGLE PHASE sealing and strain relief
Class B Insulation, Oil Filled
THREE PHASE Squirrel cage induction
Permanent Split Capacitor (PSC),
Includes Overload Protection in Motor
240/480 Volt. Requires overload
protection to be included in control
panel.

Description

Submersible non-clog sewage pumps are designed for typical

raw sewage application.

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100

CPSE 1.5, 2, 3HP

Submersible Sewage

For Models: CPSE1594, 1544, 2094 & 2044 www.championpump.com

MODEL HP Volt/PH Hz RPM NEMA Full Load Locked Cord Cord Cord
(Nom) Start Code Amps Rotor Amps Size Type O.D
CPSE1594 SOW 0.750
CPSE1544 1.5 200-230/3 60 1750 H/L 8.7/8.0 30.3/36.0 10/4
CPSE2094 SOW 0.750
CPSE2044 1.5 460/3 60 1750 L 4.0 17.4 10/4
SOW 0.750
2.0 200-230/3 60 1750 J/M 15.3/14.0 44.0/50.8 10/4
SOW 0.750
2.0 460/3 60 1750 M 7.1 25.4 10/4

Winding resistance ± 5% at terminal block. Rated operation at ± 10% voltage at motor

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100

CPSE 1.5, 2, 3HP

Submersible Sewage

For Models: CPSE1524, 2024, 3024, 3094, 3044 www.championpump.com

MODEL HP Volt/PH Hz RPM NEMA Full Load Locked Cord Cord Cord
CPSE1524 1.5 230/1 (Nom) Start Amps Rotor Amps Size Type O.D
Code
60 1750 12.5 23.1 10/3 SOW 0.690
B SOW 0.690
SOW 0.690
CPSE2024 2.0 230/1 60 1750 B 14.4 29.1 10/3 SOW 0.750
SOW 0.750
CPSE3024 3.0 230/1 60 1750 A 28.1 59.1 10/3

CPSE3094 3.0 200-230/3 60 1750 D 19.2 56.0 10/4

CPSE3044 3.0 460/3 60 1750 D 9.0 28.1 10/4

Winding resistance ± 5% at terminal block. Rated operation at ± 10% voltage at motor

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100

CPSE 1.5, 2, 3HP

Submersible Sewage

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5 www.championpump.com
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100

CPW 1/2HP

SEWAGE

Every pump tested in water to ensure pump
meets peformance curve.

FEATURES/BENEFITS IMPELLER DESIGN
Non-clog style, cast-iron vortex impeller
PERFORMANCE - Designed to help reduce clogging by foreign
Heads up to 34’ TDH material
Flows up to 109 GPM

MOTOR POWER CORD
High efficient, 115v or 230v, oil filled, Sealed entry quick disconnect power cords
permanent split capacitor motor with upper - Prevents water from entering the motor
and lower ball bearings and thermal overload housing through a cut cord
protection - Easy to replace in the field
- Constant bearing lubrication - Available in lengths up to 100’

- Maximum motor cooling SWITCH
- Runs cooler and lasts longer Piggy-back switch design
- Internal overload protection - Defective switches can be diagnosed over
- Quiet operation the phone
- Fasteners and shaft made from rugged, - Pump can be operated manually or
corrosion resistant stainless steel supplied with other piggy-back switches

SEAL DESIGN - Switch can be replaced without having to
Type 21 inboard seal design with secondary replace the pump

exclusion seal APPLICATIONS
- Rotating components of seal are in the Basements, dewatering, septic systems,
motor housing, being lubricated by the
motor oil preventing foreign matter from sewage lift stations, add-a-baths and
truck docks
wrapping around the seal components
- Seal will last longer if the pump runs dry
- Secondary exclusion seal keeps debris from Wide-angle Float Vertical Float

entering the seal cavity 1/2 HP submersible pumps that handle up to
2” solids with 2’’ discharge

PERFORMANCE CURVE

Total Head, TDH

CPWH5 CPW5

Gallons per Minute, GPM REV 0817

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

TECHNICAL DATA

DISCHARGE 2” NPT. vertical standard

SOLIDS HANDLING 2” CPW, 1-1/2” CPWH

LIQUID TEMPERATURE 140 Degrees F. (Intermittent)

MOTOR HOUSING Cast Iron

VOLUTE Cast Iron

SEAL PLATE Cast Iron

IMPELLER Cast Iron / Vortex

SHAFT Stainless Steel

SHAFT SEAL (SINGLE SEAL) Inboard mechanical with secondary
exclusion V-Seal, carbon rotating
face, ceramic stationary face, Buna-N
elastomer, 300 series stainless steel
hardware

BEARINGS (UPPER & LOWER) Single row, ball, oil lubricated

HARDWARE 300 Series stainless steel

O-RINGS Buna-N

CORD 10’ Length standard. Up to 100’ available.
(UL/CUL) Listed 16 AWG, Type SJTW

MOTOR (SINGLE PHASE) 1/2 HP 3450 RPM, 60 Hz, NEMA L
Includes overload protection in the
motor, oil filled, class B permanent split
capacitor

WEIGHT 37 lbs. (Manual)

MODEL(S) INFORMATION HP VOLTS PHASE AMPS CORD LENGTH SWITCH

MODEL 1/2 115 1 11.5 10' Manual
CPW5-11 / CPWH5-11 1/2 115 1 11.5 20' Manual
CPW5-12 / CPWH5-12 1/2 115 1 11.5 30' Manual
CPW5-13 / CPWH5-13 1/2 115 1 11.5 50' Manual
CPW5-15 / CPWH5-15 1/2 115 1 11.5 10' Wide-Angle Float
CPWA5-11 / CPWH5A-11 1/2 115 1 11.5 20' Wide-Angle Float
CPW5A-12 / CPWH5A-12 1/2 115 1 11.5 30' Wide-Angle Float
CPW5A-13 / CPWH5A-13 1/2 115 1 11.5 10' Vertical Float
CPW5V-11 / CPWH5V-11 1/2 115 1 11.5 20' Vertical Float
CPW5V-12 / CPWH5V-12 1/2 115 1 11.5 30' Vertical Float
CPW5V-13 / CPWH5V-13 1/2 230 1 5.75 20' Manual
CPW5-22 / CPWH5-22 1/2 230 1 5.75 20' Wide-Angle Float
CPW5A-22 / CPWH5A-22 1/2 230 1 5.75 20' Vertical Float
CPW5V-22 / CPWH5V-22

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805 REV 0817
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

CP4NC 4.5, 7.5, 11.3, 15HP
Submersible Non-Clog

DISCHARGE 4” 125 lb., Flange Horizontal CP4NC4524, CP4NC4534, www.championpump.com
LIQUID TEMPERATURE CP4NC4544, CP4NC4564,
MOTOR HOUSING 104°F Continuous CP4NC4564, CP4NC7524,
VOLUTE CP4NC7534, CP4NC7544,
Cast Iron, Class 30 CP4NC7564, CP4NC11334,
IMPELLER CP4NC11344, CP4NC11364,
Cast Iron, Class 30 CP4NC15034, CP4NC15044
SOLIDS HANDLING
SHAFT 2 vane open type with pump 1750RPM, 60Hz
SEALPLATE out vanes on back side,
SQUARE RINGS Dynamically balanced, ISO G6.3,
HARDWARE Cast Iron, Class 30
PAINT
3” spherical
SEAL
Stainless steel
UPPER BEARING
LOWER BEARING Cast Iron, Class 30

POWER CORD Buna-N

MOTOR Stainless steel

SINGLE PHASE Air dry enamel

THREE PHASE Double mechanical, Oil Filled
pressure equalized reservoir,
MOISTURE SENSOR Silicon Carbide outer seal
TEMPERATURE
SENSOR Single row, ball, oil lubricated

Double row, ball, oil lubricated

25 Ft. Cord. Epoxy sealed
housing with secondary
Pressure grommet for sealing
and strain relief.

Class F Insulation, Oil Filled

Capacitor Start/Capacitor Run.
Requires Starter/Panel which
includes capacitors and
overload protection.

230/460 Volt. Dual Voltage.
Requires overload protection to
be included in control panel.

Normally open (N/O),
requires relay in control panel

Normally closed (N/C),
requires relay in control panel

Description

Submersible non-clog sewage pump designed for typical raw
sewage applications.

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100

CP4NC 4.5, 7.5, 11.3, 15HP
Submersible Non-Clog

MODEL HP Volt/PH Hz RPM NEMA Full Load Locked Cord Cord Cord www.championpump.com
(Nom) Start Amps Rotor Size Type O.D
Code Amps inch
10/4 SOW
CP4NC4524 4.5 230/1 60 1750 A 26.0 59.0 10/4 SOW 0.750
56.0 10/4 SOW 0.750
CP4NC4534 4.5 230/3 60 1750 E 18.2 28.0 10/4 SOW 0.750
48.6 6/4 SOW 0.750
CP4NC4544 4.5 460/3 60 1750 E 9.1 96.0 8/4 SOW 1.060
80.0 8/4 SOW 0.830
CP4NC4564 4.5 200/3 60 1750 C 20.9 40.0 8/4 SOW 0.830
69.5 8/4 SOW 0.830
CP4NC7524 7.5 230/1 60 1750 A 39.0 126.0 8/4 SOW 0.830
63.0 8/4 SOW 0.830
CP4NC7534 7.5 230/3 60 1750 D 26.8 109.5 6/4 SOW 0.830
160.0 6/4 SOW 1.060
CP4NC7544 7.5 460/3 60 1750 D 13.4 80.0 1.060

CP4NC7564 7.5 200/3 60 1750 B 30.8

CP4NC11334 11.3 230/3 60 1750 D 28.0

CP4NC11344 11.3 460/3 60 1750 D 14.0

CP4NC11364 11.3 200/3 60 1750 B 32.2

CP4NC15034 15 230/3 60 1750 D 38.0

CP4NC15044 15 460/3 60 1750 D 19.0

Winding resistance ± 5% at terminal block. Rated operation at ± 10% voltage at motor.
Moisture/Temperature sensor cable for all models is 18/5 SOW, 0.476 inch O.D.

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100

CP4NC 4.5, 7.5, 11.3, 15HP www.championpump.com
Submersible Non-Clog

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100

CP4NC-SS 2.8, 3.7 & 5HP
Submersible Non-Clog

DISCHARGE 4” 125 lb., Flange Horizontal CP4NC2824SS, www.championpump.com
LIQUID TEMPERATURE CP4NC2834SS, CP4NC2844SS
MOTOR HOUSING 104°F CP4NC3724SS, CP4NC3734SS,
VOLUTE CP4NC3744SS, CP4NC3764SS
Cast Iron, Class 30 CP4NC5024SS, CP4NC5034SS,
IMPELLER CP4NC5044SS, CP4NC5064SS
Cast Iron, Class 30
SOLIDS HANDLING 1750RPM, 60Hz
SHAFT 2 vane open type with pump out
SEAL PLATE vanes on back side, Dynamically
PAINT balanced, ISO G6.3, Cast Iron,
SQUARE RINGS Class 30
HARDWARE
3” spherical
SEAL
Stainless steel
UPPER BEARING
LOWER BEARING Cast Iron, Class 30

POWER CORD Air dry enamel

MOTOR Buna-N
SINGLE PHASE
Stainless steel
THREE PHASE
Single mechanical, Inboard, Oil
Filled reservoir, with Secondary
Exclusion seal
Silicon Carbide/Buna-N

Single row, ball, oil lubricated

Single row, ball, oil lubricated

All Others - 25 Ft. Cord. Epoxy
sealed housing with secondary
Pressure grommet for sealing and
strain relief.

On 2.8 3Ph - 25 Ft. Cord, Pressure
Grommet for Ealing and Strain
Relief

Class B Insulation, Oil Filled

Permanent Split Capacitor (PSC)
Includes overload protection in
motor

230/460 Volt. Dual Voltage.
Requires overload protection to
be included in control panel.

Description

Submersible non-clog sewage pump designed for typical raw
sewage applications.

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100

CP4NC-SS 2.8, 3.7 & 5HP
Submersible Non-Clog

CP4NC2834SS, CP4NC2844SS

MODEL HP Hz Volts/Ph RPM NEMA FULL LOCKED CORD CORD CORD www.championpump.com
START LOAD ROTOR SIZE TYPE O.D.
CP4NC2834SS 2.8 60 230/3 1750 CODE AMPS AMPS
CP4NC2844SS 2.8 60 460/3 1750 10/4 SOW 0.75
E 8.0 35.0 10/4 SOW 0.75

E 4.0 17.5

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100

CP4NC-SS 2.8, 3.7 & 5HP
Submersible Non-Clog

CP4NC2824SS, CP4NC3724SS, CP4NC3734SS, CP4NC3744SS,
CP4NC3764SS, CP4NC5024SS, CP4NC5034SS, CP4NC5044SS,
CP4NC5064SS

MODEL HP NEMA FULL LOCKED CORD CORD CORD www.championpump.com
Hz Volts/Ph RPM START LOAD ROTOR SIZE TYPE O.D.
AMPS AMPS
CODE

CP4NC2824SS 2.8 60 230/1 1750 A 12.6 23.0 10/3 SOW 0.69

CP4NC3724SS 3.7 60 230/1 1750 A 18.5 29.0 10/3 SOW 0.69

CP4NC3734SS 3.7 60 230/3 1750 F 14.0 50.8 10/4 SOW 0.75

CP4NC3744SS 3.7 60 460/3 1750 F 7.0 25.4 10/4 SOW 0.75

CP4NC3764SS 3.7 60 208/3 1750 D 15.4 44.1 10/4 SOW 0.75

CP4NC5024SS 5.0 60 230/1 1750 A 28.0 59.0 10/3 SOW 0.69

CP4NC5034SS 5.0 60 230/3 1750 D 19.0 56.0 10/4 SOW 0.75

CP4NC5044SS 5.0 60 460/3 1750 D 9.0 28.0 10/4 SOW 0.75

CP4NC5064SS 5.0 60 208/3 1750 B 20.9 48.6 10/4 SOW 0.75

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100

CP4NC-SS 2.8, 3.7 & 5HP www.championpump.com
Submersible Non-Clog

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100

CP6NC 9, 12, 18, 24, 30HP
Submersible Non-Clog

DISCHARGE 6” 125 lb., Flange Horizontal CP6NC9096, CP6NC9046, www.championpump.com
LIQUID TEMPERATURE CP6NC12096, CP6NC12046,
MOTOR HOUSING 104°F Continuous CP6NC18096, CP6NC18046,
VOLUTE CP6NC24096, CP6NC24046,
Cast Iron, Class 30 CP6NC30096, CP6NC30046
IMPELLER
Cast Iron, Class 30 1150RPM, 60Hz
SOLIDS HANDLING
SHAFT Single vane, enclosed type with
SEAL PLATE pump out vanes on back side,
PAINT Dynamically balanced, ISO G6.3,
SQUARE RINGS Cast Iron, Class 30
HARDWARE
3” spherical
SEAL
Stainless steel
UPPER BEARING
LOWER BEARING Cast Iron, Class 30

POWER CORD Air dry enamel

MOTOR Buna-N

THREE PHASE Stainless steel

MOISTURE SENSOR Double mechanical, Oil Filled
TEMPERATURE pressure equalized reservoir,
SENSOR Silicon Carbide outer seal

Single row, ball, oil lubricated

Double row, ball, oil lubricated

25 Ft. Cord. Epoxy sealed
housing with secondary
Pressure grommet for sealing
and strain relief.

Class F Insulation, Oil Filled

230/460 Volt. Dual Voltage.
Requires overload protection to
be included in control panel

Normally open (N/O),
requires relay in control panel

Normally closed (N/C),
requires relay in control panel

Description

Submersible non-clog sewage pump designed for typical raw
sewage applications.

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100

CP6NC 9, 12, 18, 24, 30HP
Submersible Non-Clog

MODEL HP Hz Volts/ RPM NEMA FULL LOCKED CORD CORD CORD www.championpump.com
Ph START LOAD ROTOR SIZE TYPE O.D.
CP6NC9096 CODE AMPS AMPS inch
CP6NC9046 26.0 162.0 6/3-3G G 1.01
CP6NC12096 9 60 230/3 1150 F 13.0 6/3-3G G 1.01
CP6NC12046 36.0 81.0 6/3-3G G 1.01
CP6NC18096 9 60 460/3 1150 J 18.0 162.0 6/3-3G G 1.01
CP6NC18046 50.0 81.0 6/3-3G G 1.01
CP6NC24096 12 60 230/3 1150 D 25.0 232.0 6/3-3G G 1.01
CP6NC24046 64.0 116.0 6/3-3G G 1.01
CP6NC30096 12 60 460/3 1150 F 32.0 290.0 6/3-3G G 1.01
CP6NC30046 82.0 145.0 2/3-3G G 1.34
18 60 230/3 1150 C 41.0 364.0 2/3-3G G 1.34
182.0
18 60 460/3 1150 F

24 60 230/3 1150 C

24 60 460/3 1150 E

30 60 230/3 1150 C

30 60 460/3 1150 E

Winding resistance ± 5% at terminal block. Rated operation at ± 10% voltage at motor.
Moisture/Temperature sensor cable for all models is 18/5 SOW, 0.476 inch O.D.

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100

CP6NC 9, 12, 18, 24, 30HP www.championpump.com
Submersible Non-Clog

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100

CP6NC 18, 24, 30, 36, 48, 60HP
Submersible Non-Clog

DISCHARGE 6” 125 lb., Flange Horizontal CP6NC18034, CP6NC18044 www.championpump.com
LIQUID TEMPERATURE CP6NC24034, CP6NC24044
MOTOR HOUSING 104°F Continuous CP6NC30034, CP6NC30044
VOLUTE CP6NC36034, CP6NC36044
Cast Iron, Class 30 CP6NC48044, CP6NC60044
IMPELLER
Cast Iron, Class 30 1750RPM, 60Hz
SOLIDS HANDLING
SHAFT Single vane, enclosed type with
SEAL PLATE pump out vanes on back side,
PAINT Dynamically balanced, ISO G6.3,
SQUARE RINGS Cast Iron, Class 30
HARDWARE
3” spherical
SEAL
Stainless steel
UPPER BEARING
LOWER BEARING Cast Iron, Class 30

POWER CORD Air dry enamel

MOTOR Buna-N

THREE PHASE Stainless steel

MOISTURE SENSOR Double mechanical, Oil Filled
TEMPERATURE pressure equalized reservoir,
SENSOR Silicon Carbide outer seal

Single row, ball, oil lubricated

Double row, ball, oil lubricated

25 Ft. Cord. Epoxy sealed housing
with secondary Pressure grommet
for sealing and strain relief.

Class F Insulation, Oil Filled

230/460 Volt. Dual Voltage.
Requires overload protection to
be included in control panel

Normally open (N/O),
requires relay in control panel

Normally closed (N/C),
requires relay in control panel

Description

Submersible non-clog sewage pump designed for typical raw
sewage applications.

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100

CP6NC 18, 24, 30, 36, 48, 60HP
Submersible Non-Clog

MODEL HP Hz Volts/ RPM NEMA FULL LOCKED CORD CORD CORD www.championpump.com
Ph START LOAD ROTOR SIZE TYPE O.D.
CP6NC18034 1750 CODE AMPS AMPS inch
CP6NC18044 18 60 230/3 1750 6/3-3G G
CP6NC24034 18 60 460/3 1750 F 50.6 232.0 6/3-3G G 1.01
CP6NC24044 24 60 230/3 1750 F 25.3 116.0 6/3-3G G 1.01
CP6NC30034 24 60 460/3 1750 E 62.8 290.0 6/3-3G G 1.01
CP6NC30044 30 60 230/3 1750 E 31.4 145.0 2/3-3G G 1.01
CP6NC36034 30 60 460/3 1750 E 75.8 364.0 2/3-3G G 1.34
CP6NC36044 36 60 230/3 1750 E 37.9 182.0 2/3-3G G 1.34
CP6NC48044 36 60 460/3 1750 E 90.0 434.0 2/3-3G G 1.34
CP6NC60044 48 60 460/3 1750 E 45.0 217.0 2/3-3G G 1.34
60 60 460/3 E 65.0 290.0 2/3-3G G 1.34
E 78.0 363.0 1.34

Winding resistance ± 5% at terminal block. Rated operation at ± 10% voltage at motor.
Moisture/Temperature sensor cable for all models is 18/5 SOW, 0.476 inch O.D.

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100

CP6NC 18, 24, 30, 36, 48, 60HP www.championpump.com
Submersible Non-Clog

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100

CP6NC 18, 24, 30, 36, 48, 60HP www.championpump.com
Submersible Non-Clog

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100

CP6NC-H 30, 36, 48, 60HP
Submersible Non-Clog

DISCHARGE 6” 125 lb., Flange Horizontal CP6NC30034H, www.championpump.com
LIQUID TEMPERATURE CP6NC30044H,
MOTOR HOUSING 104°F Continuous CP6NC36034H,
VOLUTE CP6NC36044H,
Cast Iron, Class 30 CP6NC48044H,
IMPELLER CP6NC60044H
Cast Iron, Class 30 with Bronze
SOLIDS HANDLING wear ring 1750RPM, 60Hz
SHAFT
SEAL PLATE 3 vane, enclosed type with
PAINT pump out vanes on back side,
SQUARE RINGS Dynamically balanced, ISO G6.3,
HARDWARE Cast Iron, Class 30

SEAL 3” spherical

UPPER BEARING Stainless steel
LOWER BEARING
Cast Iron, Class 30
POWER CORD
Air dry enamel
MOTOR
Buna-N
THREE PHASE
Stainless steel
MOISTURE SENSOR
TEMPERATURE Double mechanical, Oil Filled
SENSOR pressure equalized reservoir,
Silicon Carbide outer seal

Single row, ball, oil lubricated

Double row, ball, oil lubricated

25 Ft. Cord. Epoxy sealed housing
with secondary Pressure grommet
for sealing and strain relief.

Class F Insulation, Oil Filled

230/460 Volt. Dual Voltage.
Requires overload protection to
be included in control panel

Normally open (N/O),
requires relay in control panel

Normally closed (N/C),
requires relay in control panel

Description

Submersible non-clog sewage pump designed for typical raw
sewage applications.

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100