WEB_CP_PUMP CATALOG SHEETS_BINDER

CP6NC-H 30, 36, 48, 60HP
Submersible Non-Clog

MODEL NEMA FULL LOCKED CORD CORD CORD www.championpump.com
HP Hz Volts/Ph RPM START LOAD ROTOR SIZE TYPE O.D.
CP6NC30034H
CP6NC30044H CODE AMPS AMPS 2/3-3G G 1.34
CP6NC36034H 30 60 230/3 1750 E 76.0 364.0 2/3-3G G 1.34
CP6NC36044H 2/3-3G G 1.34
CP6NC48044H 30 60 460/3 1750 E 38.0 182.0 2/3-3G G 1.34
CP6NC60044H 2/3-3G G 1.34
36 60 230/3 1750 E 90.0 434.0 2/3-3G G 1.34

36 60 460/3 1750 E 45.0 217.0

48 60 460/3 1750 E 65.0 290.0

60 60 460/3 1750 E 78.0 363.0

Winding resistance ± 5% at terminal block. Rated operation at ± 10% voltage at motor.
Moisture and Temperature sensor cable for all models is 18/5 SOW, 0.476” O.D. ± .02”

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100

CP6NC-H 30, 36, 48, 60HP www.championpump.com
Submersible Non-Clog

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100

CP8NC 36, 48HP

Submersible Non-Clog

DISCHARGE 8” 125 lb., Flange Horizontal CP8NC36036, www.championpump.com
LIQUID TEMPERATURE CP8NC36046,
MOTOR HOUSING 104°F Continuous CP8NC48046
VOLUTE
Cast Iron, Class 30 1150RPM, 60Hz
IMPELLER
Cast Iron, Class 30 with Bronze
SOLIDS HANDLING wear ring
SHAFT
SEAL PLATE 3 vane, enclosed type with
PAINT pump out vanes on back side,
SQUARE RINGS Dynamically balanced, ISO
HARDWARE G6.3, Cast Iron, Class 30

SEAL 3” spherical

UPPER BEARING Stainless steel
LOWER BEARING
Cast Iron, Class 30
POWER CORD
Air dry enamel
MOTOR
THREE PHASE Buna-N

MOISTURE SENSOR Stainless steel
TEMPERATURE
SENSOR Double mechanical, Oil Filled
pressure equalized reservoir,
inner seal -
Carbon/Ceramic/Buna-N
outer seal -
Silicon Carbide/Buna-N

Single row, ball, oil lubricated

Double row, ball, oil lubricated

25 Ft. Cord. Epoxy sealed
housing with secondary
Pressure grommet for sealing
and strain relief.

Class F Insulation, Oil Filled

230/460 Volt. Dual Voltage.
Requires overload protection
to be included in control panel

Normally open (N/O),
requires relay in control panel

Normally closed (N/C),
requires relay in control panel

Description

Submersible non-clog sewage pump designed for typical
raw sewage applications.

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100

CP8NC 36, 48HP

Submersible Non-Clog

MODEL NEMA FULL LOCKED CORD SIZE CORD CORD www.championpump.com
HP Hz Volts/Ph RPM START LOAD ROTOR TYPE O.D.
AMPS AMPS
CODE 1.34
90.0 434.0 1.34
CP8NC36036 36 60 230/3 1150 E 2/3-3G G 1.34
45.0 217.0 2/3-3G G
CP8NC36046 36 60 460/3 1150 E 2/3-3G G
65.0 290.0
CP8NC48046 48 60 460/3 1150 E

Winding resistance ± 5% at terminal block. Rated operation at ± 10% voltage at motor.
Moisture and Temperature sensor cable for all models is 18/5 SOW, 0.476” O.D. ± .02”

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100

CP8NC 36, 48HP

Submersible Non-Clog

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5 www.championpump.com
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5 www.championpump.com
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100

CPG 3, 5, 7.5HP

Submersible Grinder

DISCHARGE 2” NPT Vertical, Bolt-on Flange

LIQUID 104°F (40°C) Intermittent
TEMPERATURE

VOLUTE Cast Iron, Class 30

MOTOR HOUSING Cast Iron, Class 30

SEAL PLATE Cast Iron, Class 30 www.championpump.com

IMPELLER 12 Vane, Vortex, Bronze

SHREDDING RING Stainless Steel

CUTTER Stainless Steel

SHAFT Stainless Steel

SQUARE RINGS Buna-N

HARDWARE Stainless Steel

PAINT Air dry enamel

SEAL Tandem Double Mechanical, Oil
Filled Reservoir,
Upper - Carbon/Ceramic/Buna-N
Lower -
Silicon Carbide/Silicon Carbide/Viton
Stainless Hardware

UPPER BEARING Single row, Ball, Oil Lubricated

INTERMEDIATE Single row, Ball, Oil Lubricated
BEARING

LOWER BEARING Sleeve, Oil Lubricated

POWER CORD 40 ft. Cord . Pressure grommet CPG3022,
for Sealing and Strain Relief. CPG3062,CPG3032,
CPG3042,CPG5002,
MOTOR Oil Filled, Squirrel Cage CPG5022,CPG5062,
Induction, Class F Insulation CPG5032,CPG5042,
CPG7532,CPG7542
SINGLE PHASE Capacitor Start/Capacitor Run.
Requires overload protection in 3450RPM•60Hz
the control panel, Requires starter
or control panel which includes
capacitors.

THREE PHASE Dual Voltage 230/460. Requires
overload protection in control
panel

MOISTURE SENSOR Normally Open (NO).
Requires relay in control panel

TEMPERATURE SENSOR Normally Closed (NC).
Requires relay in control panel

Description

Designed to reduce domestic, commercial, institutional and
nely ground slurry.

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5 Rev 0318
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100

CPG 3, 5, 7.5HP

Submersible Grinder

MODEL HP Hz Volts/Ph RPM Full Load Locked NEMA Cord Cord Cord www.championpump.com
Amps Rotor Start Code Type Size O.D.
CPG3022 Amps
CPG3062 10/4 .75
CPG3032 3 60 230/1 3450 21.7 75.0 G SOW 10/4 .75
CPG3042 10/4 .75
CPG5002 3 60 200/3 3450 17.0 65.0 J SOW 10/4 .75
CPG5022 12/3 .67
CPG5062 3 60 230/3 3450 14.5 62.0 K SOW 12/3 .67
CPG5032 10/4 .75
CPG5042 3 60 460/3 3450 7.2 31.0 K SOW 10/4 .75
CPG7532 10/4 .75
CPG7542 5 60 200/1 3450 42.0 134.0 F SOW 10/4 .75
10/4 .75
5 60 230/1 3450 39.0 136.0 H SOW

5 60 200/3 3450 25.0 122.0 K SOW

5 60 240/3 3450 21.9 120.0 L SOW

5 60 480/3 3450 11.0 60.0 L SOW

7.5 60 230/3 3450 22.3 136.0 J SOW

7.5 60 460/3 3450 11.2 68.0 J SOW

Moisture & Temperature sensor cable for all other models is 18/5 SOW. 0.47 inches O.D.

IMPORTANT!
These pumps are not approved for use in swimming pools, recreational water parks, or installations where human contact with
pumped media ia a common occurrence.

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5 Rev 1114
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100

CPG 3, 5, 7.5HP

Submersible Grinder

C h a m p i o n P u m p C o m p a n y , I n c • P. O . B o x 5 2 8 • A s h l a n d , O H 4 4 8 0 5 www.championpump.com
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100
Rev 0115

CPG 1HP

GRINDER

Every pump tested in water to ensure pump
meets peformance curve.

FEATURES/BENEFITS CUTTER ASSEMBLY
440 SST (56-60 Rockwell)
PERFORMANCE - 2 4,000 cuts per second and 1.5 million cuts
Heads up to 55’ TDH a minute
Flows up to 42 GPM - D esigned to reduce over loading and
MOTOR clogging
Internal or external capacitor start/capacitor POWER CORD
run 115v or 208-230v, oil filled motors with Sealed entry quick disconnect power cords
upper and lower ball bearings and thermal - Prevents water from entering the motor
over load protection housing through a cut cord
- C onstant bearing lubrication - E asy to replace in the fieldt
- Maximum motor cooling - A vailable in lengths up to 100’
- R uns cooler and lasts longer SWITCH
- I nternal overload protection Piggy-back switch design
- Q uiet operation - Defective switches can be diagnosed over
- Fasteners and shaft made from rugged, the phone
corrosion resistant stainless steel - P ump can be operated manually or
SEAL DESIGN supplied with other piggy-back switches
Single, Type 21 mechanical seal - S witch can be replaced without having to
IMPELLER DESIGN replace the pump
Non-clog style, cast-iron vortex impeller
- D esigned to generate higher heads and APPLICATIONS
reduce clogging by foreign materials Residential developments, commercial
- P rovides non-overloading performance developments and wastewater
applications

1 HP grinder pumps that have a 1 1/4” or
2” vertical discharge that handles up to 3” solids

PERFORMANCE CURVE

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805 REV 1117
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

TECHNICAL DATA

DISCHARGE 1 1/4” NPT. vertical standard with
optional 2” adapter

SOLIDS HANDLING 3”

LIQUID TEMPERATURE 140 Degrees F. (Intermittent)

MOTOR HOUSING Cast Iron

VOLUTE Cast Iron

SEAL PLATE Cast Iron

IMPELLER Cast Iron / Vortex

SHAFT Stainless Steel

SHAFT SEAL (SINGLE SEAL) Single mechanical, carbon rotating
face, ceramic stationary face, Buna-N
elastomer, 300 series stainless steel
hardware

BEARINGS (UPPER &LOWER) Single row, ball, oil lubricated

HARDWARE 300 Series stainless steel

O-RINGS Buna-N

CORD 10’ Length standard. Up to 100’ available.
UL/CSA (SJOW) 14/3 (.375 OD)
Quick disconnect pin terminals *UL/CSA
(SO) Cord 14 Ga. (.60 OD)

MOTOR (SINGLE PHASE) 1 HP 3450 RPM. 60 Hz, Includes overload
protection in the motor, oil filled, class F
permanent split capacitor

WEIGHT 78 lbs. (Manual)

MODEL(S) INFORMATION

MODEL HP VOLTS PHASE AMPS CORD LENGTH SWITCH

CPG1011 1 115 1 13 10' Manual
CPG1012 1 115 1 13 20' Manual
CPG1013 1 115 1 13 30' Manual
CPG1015 1 115 1 13 50' Manual
CPG1011A 1 115 1 13 10' Wide-Angle Float
CPG1012A 1 115 1 13 20' Wide-Angle Float
CPG1013A 1 115 1 13 30' Wide-Angle Float
CPG1011V 1 115 1 13 10' Vertical Float
CPG1012V 1 115 1 13 20' Vertical Float
CPG1013V 1 115 1 13 30' Vertical Float
CPG 1022 1 208-230 1 13 20' Manual
CPG 1022A 1 208-230 1 6.5 20’ Wide-Angle Float
CPG 1023 1 208-230 1 6.5 30’ Manual
CPG 1023A 1 208-230 1 6.5 30’ Wide-Angle Float

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805 REV 1117
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

CPG(H) 2HP

GRINDER

Every pump tested in water to ensure pump
meets peformance curve.

FEATURES/BENEFITS CUTTER ASSEMBLY
440 SST (56-60 Rockwell)
PERFORMANCE - 2 4,000 cuts per second and 1.5 million cuts
Heads up to 133’ TDH a minute
Flows up to 44 GPM - Designed to reduce over loading and
MOTOR clogging
Internal or external capacitor start/capacitor
run 208-230v, oil filled motors with upper POWER CORD
and lower ball bearings and thermal over Sealed entry quick disconnect power cords
load protection - P revents water from entering the motor
- Constant bearing lubrication housing through a cut cord
- M aximum motor cooling - E asy to replace in the field without having
- R uns cooler and lasts longer to run a new power cord
- I nternal overload protection - A vailable in lengths up to 100’
- Quiet operation
- F asteners and shaft made from rugged, SWITCH
corrosion resistant stainless steel Piggy-back switch design
SEAL DESIGN - Defective switches can be diagnosed over
Double seal, oil filled chamber the phone
- Provides added leakage protection - Pump can be operated manually or
- Optional seal failure feature supplied with other piggy-back switches
IMPELLER DESIGN - Switch can be replaced without having to
Non-clog style, cast-iron vortex impeller replace the pump
- D esigned to generate higher heads and
reduce clogging by foreign materials APPLICATIONS
- P rovides non-overloading performance Residential developments, commercial
developments and wastewater
applications
2 HP grinder pumps that have a 1 1/4” or 2” optional

vertical discharge that handles up to 3” solids

PERFORMANCE CURVE

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805 REV 1117
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com

TECHNICAL DATA

DISCHARGE 1 1/4” NPT. vertical standard
or optional 2”

SOLIDS HANDLING 3”

LIQUID TEMPERATURE 150 Degrees F. (Intermittent)

MOTOR HOUSING Cast Iron

VOLUTE Cast Iron

SEAL PLATE Cast Iron

IMPELLER Cast Iron / Vortex

SHAFT Stainless Steel

SHAFT SEAL (DOUBLE SEAL) Tandem double mechanical upper &

with optional seal fail lower, carbon ceramic, Buna-N

elastomer, 300 stainless steel hardware

BEARINGS (UPPER &LOWER) Single row, ball, oil lubricated

HARDWARE 300 Series stainless steel

O-RINGS Buna-N

CORD 20’ Length standard. Up to 100’ available.
UL/CSA (SJOW) 14/3 (.375 OD)
Quick disconnect pin terminals *UL/CSA
(SO) Cord 14 Ga. (.60 OD)

MOTOR (SINGLE PHASE) 2 HP 3450 RPM. 60 Hz, Includes overload
protection in the motor, oil filled, class F
permanent split capacitor

WEIGHT 75 lbs. Single seal (Manual)
85 lbs. Double seal (Manual)

MODEL(S) INFORMATION

MODEL HP VOLTS PHASE AMPS CORD LENGTH SWITCH REQUIRES PANEL

CPG(H) 2022DS(A) 2 208/230 1 15 20’ Manual (Automatic) No
3 11 20'
CPG(H) 2092DSL 2 208 1 15 30’ Manual Yes
3 9 20’
CPG(H) 2023DSL 2 208/230 3 4.5 20’ Manual Yes

CPG(H) 2032DSL 2 230 Manual Yes

*CPG(H) 2042DSL 2 460 Manual Yes

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805 REV 1117
Phone 419-281-4500 • Fax 419-616-1100 • www.championpump.com