G - Cable Pulling, Handling & Prep

Cable Pulling, Handling & Prep

CABLE PULLING,
HANDLING & PREP

Index G50-G51 Slings G54-G60
G44-G49 Specialty Distribution Tools G15
ACSR Trimmers G2 Swivels G52
Blocks G38-G39 Tension Meters G43
Cable Preparation Examples G40-G43 Tools for Overhead
Capstan Hoists G64 G6-G9
Chain & Rope Hoists G20 Primary Distribution
Conduit Rodders G34 Tools for Secondary G2-G5
Cumalongs G21-G33 G16-G19
Grip Accessories G53 Distribution
Grips G62-G63 Tools for Transmission Cable G10-G15
Muletape G49-G50 Tools for Underground G35-G37
Reels G61 G2
Sag Tools Primary Distribution
Sling Angle Capabilities Wire Mesh Grips
Wire Mike

CABLE PULLING, HANDLING & PREP

G2 Tools for Secondary Distribution

Cable Preparation Examples

Mid-Span Stripping of Tree Wire, RMS, WS 1 Removing Strippable Insulation Shield from URD BP A
Spacer Cables and Riser/Tap Wire WS 2, WSK 2 Cables BP 1A
WS 10, WSK 10 BP 2A
End Striping 600 V Secondary Cables with either WS 55, WS 71 BP 3A
Square or Chamfer Cuts WS 62-U-M WS 15
WS 64-U-M
Jacket Stripping URD Cables WS-MSES, WS 72 Removing Bonded Insulation Shield from URD and WS 9A, WS 9C
Transmission Cables WC 9S, WS 9S-T
Insulation End Stripping URD Cables 4 x 4 PLUS WS 40
2 x 2 PLUS Pencilling URD Cables WS 51
Insulation End Stripping-Transmission Cables WS 68, WS 22 WS 51A
WS 62-U-E WS 57A
WS 68 SNAP
WS 72 WS 7
WS 7A
WS 61 WS 8
WS 64-U WS 8A
WS 73
RCS-114 Pencilling Transmission Cables WS 14A
RCS-158 WS 16
MK01A, MK04 WS 17
WS 37
WS 5, WS 5A
WS 5B, WS 5DA Chamfering Insulation on URD Cables IC 1
WS 6, WS 50 IC 2
WS 50A
CABLE PULLING, WS 58
HANDLING & PREP WS 64-U-E

WS 13B
WS 50
WS 50A
WS 57
WS 70

A. 4 x 4 PLUS Cable End Strippers

• For 600 volt secondary cable.

• Cutting heads for #6 AWG to 500 MCM conductors (concentric,

compressed or compact).

• Strips 45 MIL to 110 LIM XLPE, polyethylene and EPR insulation.

• Choice of square cut or chamfer cut blade.

• Precision stripping with no conductor damage.

A. • Guarded cutting blades ensure safety.
B.
• Bushings change easily and rapidly in the field or in your shop.
C.
• U.S. Design Patent No. 297,910.
www.americansafety.com
• Extension (strips extra 1 1/2”) available.

• Length: 4.45 in.

• Height: 4.953 in.

• Ship. Wt. 13.9 oz.

Cat. No. 4x4

——————————

B. 2 x 2 PLUS Double-Ended End Strippers

Same features as 4 x 4 PLUS, plus:

• Strips quickly, even in cold climates.

• Bushings change easily with hex wrench.

• Length: 5.69 in.

• Ship. Wt. 7.95 oz.

Cat. No. 2x2

——————————

C. Burndy Wire Mike - The wire mike is a useful instrument
designed for measuring ACSR, stranded and solid conductors,
I.P.S. tubing, rigid and thin wall conduit, plus inside and outside
dimensions of tubing and pipe sizes. A ruler is also included.

(Ship. Wt. .1 lbs.)

Cat. No. WM194

24 hour Fax (704) 481-0450

CABLE PULLING, HANDLING & PREP

G3Tools for Secondary Distribution

2 x 2 Plus & 4 x 4 Plus Bushing to Square Cut Insulation

Sizes for Concentric Strand Conductors

Insulation Thickness

Conductor 45 MIL 60 MIL 80 MIL 95 MIL

Size Max. O.D. Part. No. Max. O.D. Part. No. Max. O.D. Part. No. Max. O.D. Part. No.
AWG in mm in mm in mm in mm
10-30030 * 10-40075
6 .290 7.37 10-35030 .315 8.00 10-32540 ** * .390 9.91 *
4 .340 8.64 10-40030 .365 9.27 10-37540 ** 10-47560 * * *
2 .390 9.91 * .440 11.18 10-45040 .465 11.81 10-52560 * * *
1 ** * .465 11.81 10-47540 .515 13.08 10-57560 * * 10-60075
1/0 ** * .515 13.08 10-52540 .565 14.35 10-60060 .590 14.99 10-65075
2/0 ** * .565 14.35 10-57540 .590 14.99 10-67560 .640 16.26 10-70075
3/0 ** * .615 15.62 10-62540 .665 16.89 10-72560 .690 17.53 10-75075
4/0 ** .665 16.89 10-67540 .715 18.16 .740 18.80

MCM in mm in mm in mm in mm

250 * * * ** * .765 19.43 11-77560 .790 20.07 11-80075
350 * * * ** * .865 21.97 11-87560 .890 22.61 11-90075
500 * * * ** * .990 25.15 11-100060 1.040 26.42 11-105075

Sizes for Compressed Strand Conductors

Insulation Thickness

Conductor 45 MIL 60 MIL 80 MIL 95 MIL CABLE PULLING,
HANDLING & PREP
Size Max. O.D. Part. No. Max. O.D. Part. No. Max. O.D. Part. No. Max. O.D. Part. No.
AWG in mm in mm in mm in mm
10-30030 * 10-40075
6 .290 7.37 10-35030 .315 8.00 10-32540 ** * .390 9.91 *
4 .340 8.64 10-40030 .365 9.27 10-37540 ** 10-47560 * * *
2 .390 9.91 * .415 10.54 10-42540 .465 11.81 10-52560 * * *
1 ** * .465 11.81 10-47540 .515 13.08 10-55060 * * 10-60075
1/0 ** * .490 12.45 10-50040 .540 13.72 10-60060 .590 14.99 10-62575
2/0 ** * .540 13.72 10-55040 .590 14.99 10-65060 .615 15.62 10-67575
3/0 ** * .590 14.99 10-60040 .640 16.26 10-70060 .665 16.89 10-75075
4/0 ** .665 16.89 10-67540 .690 17.53 .740 18.80

MCM in mm in mm in mm in mm

250 * * * ** * .740 18.80 11-75060 .765 19.43 11-77575
350 * * * ** * .840 21.34 11-85060 .890 22.61 11-90075
500 * * * ** * .965 24.51 11-97560 1.015 25.78 11-102575

Sizes for Compacted Strand Conductors

Insulation Thickness

Conductor 45 MIL 60 MIL 80 MIL 95 MIL

Size Max. O.D. Part. No. Max. O.D. Part. No. Max. O.D. Part. No. Max. O.D. Part. No.
AWG in mm in mm in mm in mm
10-30030 * 10-40075
6 .290 7.37 10-35030 .315 8.00 10-32540 ** * .390 9.91 *
4 .340 8.64 10-40030 .365 9.27 10-37540 ** 10-47560 * * *
2 .390 9.91 * .415 10.54 10-42540 .465 11.80 10-50060 * * *
1 ** * .440 11.18 10-45040 .490 12.35 10-52560 * * 10-57575
1/0 ** * .465 12.81 10-47540 .515 13.08 10-57560 .565 14.35 10-60075
2/0 ** * .515 13.08 10-52540 .565 14.35 10-62560 .590 14.99 10-65075
3/0 ** * .565 14.35 10-57540 .615 15.62 10-67560 .640 16.26 10-70075
4/0 ** .615 16.62 10-62540 .665 16.89 .690 17.35

MCM in mm in mm in mm in mm

250 * * * ** * .715 18.16 11-72560 .740 18.80 11-75075
350 * * * ** * .790 20.07 11-80060 .840 21.34 11-85075
500 * * * ** * .915 23.24 11-92560 .965 24.15 11-97575

[email protected] Call Toll Free (800) 438-6013

CABLE PULLING, HANDLING & PREP

G4 Tools for Secondary Distribution

A. WS 68 - SNAP Power Driven Stripper

• Adds a bushing quick disconnect feature eliminating need for a
hex wrench

• Ergonomic end stripping tools for 600 volt secondary cable -
designed for use with a low or variable speed power drill

• Designed to reduce working time and effort on repetitive
stripping functions

• Adjustable strip stop with adjustment window allows easy setup
for precise strip lengths from 0.625” (15.9 mm) to 2.5” (63.6 mm)

A. • Use standard 2 x 2 and 4 x 4 bushings: from #6 AWG to 500
MCM (Concentric, compressed or compacted)
• 3/8” and 1/2” square socket adapters available
• Bushing change easily without hex wrench
• Strips quickly, even in cold climates
• Precision stripping with no conductor damage
• Guarded cutting blades ensures safety
• Length without bushings: 7.44 in.
• Available with choice of drill drive or socket drive adapter
• Low speed or variable speed drill
• Ship Wt. without bushings: 1.1 lb.

Cat. No. 37955

——————————

B. WS 22 - Double-Ended End Stripper

CABLE PULLING, • For 600 volt cables, 1/0 AWG to 1000 MCM
HANDLING & PREP
• Square-cuts two specific cable sizes

• Clean strips quickly with no conductor damage

• Made in the USA

• U.S. Patent No: 297,910

B. • Length: 6 in.

• Ship. Wt. 1.0 lb.

ORDERING INFORMATION:
1. Select 2 bushings
2. If uncertain, send cable samples

Cat. No. 12304H

——————————

C. WS 22A - Power Driven End Stripper

• Ergonomic end stripping tool for 600 volt secondary cable, 1/0
AWG to 1000 MCM - designed for use with a low or variable speed
power drill
• Tool designed to reduce working time and effort on repetitive
stripping functions
• Adjustable strip stop with adjustment window allows easy setup for
precise strip lengths from 1 in (25.4 mm) to 5.0 in (127 mm)
• Choice of Drill Drive or Socket Drive adapters available
• Uses standard WS 22 bushings
• Strips quickly, even in cold climates

C. • Precision stripping with no conductor damage
• Guarded cutting blades ensure safety
• Made in USA
• Length without bushings: 7.44 in.
• Ship. Wt. without bushings: 15 oz.

Cat. No. Description
12340 With 3/8” Drill Drive
12340-1 With 1/4” Hex Drive
12340-2 With 3/8” Square Socket Drive
12340-3 With 1/2” Square Socket Drive

www.americansafety.com 24 hour Fax (704) 481-0450

CABLE PULLING, HANDLING & PREP G5

Tools for Secondary Distribution

D. WS 62 - Adjustable Cable Stripper

• “Universal” tool for end stripping or mid span stripping of high D.
density outer jackets or insulating material

• End stripping and mid span stripping with different blades
(interchangeable)

• For cable sizes from 1/2” up to 1 1/2” (12.7 to 38.1 mm) cable OD.
• Adjustable design perfect for contractors working on common

secondary voltage applications
• Removes outer jacket on smaller primary power cables (all major

insulation shields)
• When using mid span stripping version, caution must be used

when end stripping concentric neutral cables
• Versatile design also includes ability to strip secondary and

primary insulations
• Quickly and easily adjusts to cable size with spring loaded

“trigger-action” jaw
• Micro adjustable blade allows accurate setup for a variety of

insulation thicknesses
• Self feeding tool design allows easy and efficient operation with

minimal effort
• Compact design for tighter work space requirements
• Rugged, all metal body design
• U.S. Patent No. D437,766
• Made in USA
• Length: 8 in.
• Weight: 1.7 lb.

AVAILABLE CONFIGURATIONS: Installed CABLE PULLING,
Cat. No. Model No. Function Blade HANDLING & PREP
CB 50K
37291 WS 62-U-E End Stripping Only
37292 • Outer jackets up to 1.5” OD (38.1 mm) CB 236
37290 • Insulation to 1.5” OD, up to 35Kv - 345
CB 242
mils (8.8 mm) maximum thickness CB 236

WS 62-U-M Mid Span E.
• Outer jackets up to 1.5” OD (38.1 mm)
• 175 mil (4.4 mm) maximum insulation/
covering thickness

WS 62-U-EM End Strip and Mid Span Stripping

——————————

E. Cable Insulation Stripper - For secondary cable. Strips F.
insulation off cables ranging from #6 to 1000 MCM conductors.
Adjustable to Cable OD .29” to 1.375” (7.4 mm to 34.9 mm).
Selectable blade depth. No bushing required. Unlimited Stripping
Length.

Cat. No. Description
2750SS Insulation Stripper
2781 Replacement Blade

—————————— Call Toll Free (800) 438-6013

F. Ergonomic Kit - Secondary Cable Stripping

• Can be customized with the WS 22A, or the WS 68 Snap, or both
• Can be customized with bushing in the ranges of 8-500 MCM or

500-1000 MCM
• Can contain spare parts, blades, tube-o-lube, etc
• Includes carrying case
• Call our representative for more information and to place your order

[email protected]

G6 CABLE PULLING, HANDLING & PREP

Tools for Overhead Primary Distribution

A. WS 71 & WS 72 - Adjustable End and Mid-Span Stripper -

• For end (WS 71) and mid-span stripping (WS 72) of 600V

secondary cable

• Cable range of 1/2 to 1.3 in. OD (1/0 to 750 MCM)

• Bright color for easy visibility

• Preset blade positions for 45, 60, 80, 90, and 110 mil insulation thickness

• Quick release adjustment simplifies sizing on cable

• Made of impact resistant and lightweight polymer material

• Mid-Span and End Stripping blades are interchangeable in the

same tool body

• Made in the USA

• Dimensions: 5 x 4 x 2 1/2 in.

A. • Ship Wt. 9.3 oz.

Cat. No. Model. Function Installed
42120 No. Blade
42130 WS 71 End Stripping CB 7
Cable Range .5” to 1.3” OD
WS 72 Mid-Span Stripping CB 272
Cable Range .5” to 1.3” OD

CABLE PULLING, B.
HANDLING & PREP
——————————

B. RMS - Remote Mid-Span Stripper

The Remote Mid-Span Stripper will quickly and safely remove
insulation from tree wire and space cable with cable OD’s of .600
to 1.75” and voltages of 15 KV to 34.5 KV.

FEATURES:
• Tool will mid-span strip any phase without removing conductor

from spacer
• Designed for one-man hand operation from a bucket
• The tool’s head is surrounded by an insulated Delrin housing with an

insulated stick and epoxy shaft connecting the head to the gear box
• Each cable size requires a separate bushing
• Each bushing comes with a wire gauge to ensure the proper bushing is

used on the wire
• The hot stick can be fabricated to a variety of lengths as requested
• Length and weight varies according to customer specifications for a 4’

model. Overall length is 73” (1.85 mm) and weight is 11 lbs. (5 Kg).
Also available in 2’, 5’, 6’, 7’, and 8’ lengths.
• Mid span stripping will now be accomplished in a fraction of the time.

Cat. No. RMS-4FT

www.americansafety.com 24 hour Fax (704) 481-0450

CABLE PULLING, HANDLING & PREP G7

Tools for Overhead Primary Distribution

C. WS-MSES - Mid-Span Tool for Primary Tap Wire

FEATURES:

• Mid-span and end stripping tool for fast and efficient removal of

polyethylene covering on primary voltage top or riser wires

• Designed to easily remove a section of cable jacket at mid-span

for the purpose of clamping a lightning arrestors

• Tool feeds easily and strips any desired length

• Tools are cable sized specific and designed to strip cable with no

conductor damage C.

• Unique spring loaded locking bolt opens the tool body

halves for quick and easy positioning onto the cable

• Convenient pull ring at the end of the locking bolt also

serves as a means of attachment to tool belt/pouch

• Replacement Blade: CB 223

• Common Wire Sizes: #2, #4 and #6 AWG with 110 mil

coverings

• Length: 4.25”

• Ship Wt. 15 oz.

Cat. No. Model No. Description
37388 WS-MSES#2 Mid Span Tool for #2, 110 mil insulation
37380 WS-MSES#4
37384 WS-MSES#6 Mid Span Tool for #4, 110 mil insulation

Mid Span Tool for #6, 110 mil insulation

——————————

D. WS 58 - Adjustable End Stripper CABLE PULLING,
HANDLING & PREP
• For .625 to 1.625 in (15.88 to 41.28 mm) cable OD

• Fast, slide-action adjustment

• Two handle power turning strips easily

• Clean, safe cuts prevent conductor damage

• Adjustable to fit wide range of cable ODs D.
• Made in USA

• Replacement Blade: CB 100

• Length: 16.5” E.
• Ship Wt. 2.1 lbs.

Cat. No. 34360

——————————

E. WS 61 - Adjustable URD Jacket Stripper

• For stripping encapsulated jackets of #2 AWG to 1000 MCM

URD cables

• Cable ODs up to 2.25 in (57.15 mm)

• Blade adjustment feature offers precise positioning

• Designed specifically for removal of tough polyethylene

encapsulates jackets

• Can also be used as an adjustable end stripper

• Two handles permit safe, easy operation

• Prevents damage to underlying concentric conductors

• Made in USA

• Replacement Blade: CB 155K

• Length: 14.5”

• Ship Wt. 2.1 lbs.

Cat. No. 34720

[email protected] Call Toll Free (800) 438-6013

CABLE PULLING, HANDLING & PREP

G8 Tools for Overhead Primary Distribution

A. WS 2 & WSK 2 - Mid-Span Stripper

• For .750 to 1.300” (19.05 to 33.02 mm) cable OD

A. • Operates on all tree wire and spacer cables

Handle Types: • Strips at end of any point along cable length (mid-span)

• Designed for Hot Stick Operation

• Choice of handle styles

• Each tool built for a specific cable size

• Strips to any length in one continuous operation

• WSK models have double-action blades

• U.S. Patent No. 3,204,495

CABLE PULLING, • Length: 11” end-to-end
HANDLING & PREP
• Ship Wt. 2.5 lbs.
Hook/Ring
Plastic ORDERING INFORMATION:
1. Select the type of handle you want
3/4" (19mm) Rings 2. Send American Safety a cable sample and/or a cable
2 1/2" (64mm) Rings
specification sheet identifying cable OD and insulation thickness

Models Plastic 3/4” Cable Insulation Replacement
Cat. No. WSP 2 WSR 2 O.D. Thickness Blade
18500 18200
Hook/Ring WSPK 2 WSRK 2 (in) (mils) CB 2
WS 2 20000 19800 .750 45 to 125 CB 1
18100 1.300 125 to 200 CB 8-2A
WSK 2 .750 ≥ 200 CB 19
19700 1.300

——————————
B. MK10A - Outer Cable Stripper

• Designed for precision stripping of a variety of insulation types
including rubber, PVC, nylon, and cotton

• Also recommended for cutting copper screening of coaxial cables
from 0.31 to 0.98 inches (4.5 mm) depth

B. • Stripping action is both circumferential, then longitudinal for
removal of insulation section at the end or mid span of wires
www.americansafety.com
• Blade depth setting can be locked to assure consistent repetitive
operations

• Roller support of cable for smooth stripping action

• Dimension: 6.7 x 1.6 x 1.1 inches

• Ship Wt. 6.7 oz.

Cat. No. 39380

24 hour Fax (704) 481-0450

CABLE PULLING, HANDLING & PREP G9

Tools for Overhead Primary Distribution

C. WS 64-U - Adjustable Cable Stripper

• Universal tool for end stripping or mid span stripping of outer

jackets or insulating material

• End stripping and mid span stripping with different blades

(interchangeable)

• “Dual position” jaw for cable sizes from 1/2” up to 2 1/2”, cable OD is

versatile for electric utility applications

• Removes outer jacket on primary power cable (all major

insulation shields)

• When using mid span blade stripping version, caution must be

used when end stripping concentric neutral cables

• Versatile design includes ability to strip secondary and primary

insulations

• Quickly and easily adjusts to cable size with spring loaded

“trigger-action” jaw

• Micro adjustable blade allows accurate setup for a variety of

insulation thicknesses

• Self feeding tool design for tighter work space requirements

• Rugged, all metal body design

• Length: 8”

• Ship Wt.: 1.9 lb.

Available Configurations (blades are interchangeable): C.

Cat. No. Model No. Description CABLE PULLING,
37296 WS 64-U-E End Stripping Only; Installed Blade: HANDLING & PREP
CB 242; Outer jackets up to 2.5” OD;
Insulation up to 1.5” OD up to 35Kv -
345 mils thickness
37297 WS 64-U-M Mid Span/End Stripping; Installed
Blade: CB 236; Outer jackets up to 2.5”
OD; 175 mil maximum insulation/
covering thickness (15 Kv)
37295 WS 64-U-EM End Strip and Mid Span Stripping;
CB 242 Installed, CB 236 Included

——————————

D. RCS-114 & RCS-158 - Adjustable Cable Stripper

• Two tools designed for fast, safe, and precise jacket removal of PE, D.
PVC, rubber, and other jackets
Call Toll Free (800) 438-6013
• Fiber Optic cables - excellent tool for precise jacket stripping of
fiber optic multi-fiber cables

• RCS-114 for smaller diameter cables: 0.178 to 1.14”
• RCS-158 for larger diameter cables: 0.75 to 1.58”
• “Tri-Action Strip” capability
• Rotary cut to a longitudinal cut along the cable length for end stripping
• Spiral cut for end stripping
• Spiral cut for mid-span stripping
• Spiral cutting feature provides easier removal of harder jackets
• Spring-loaded cable brace firmly secures cable to the blade for

controlled cutting action
• Comfort and ergonomic design for ease of use and storage
• Long life blade design
• Blade depth can be regulated by simply turning the blade housing
• Blade housing is PTFE coated, for smooth, low effort stripping

Cat. No. Model No. Description CB 231
37140 RCS-144 Replacement Blade: 5.43”
Length: 3.84 oz.
Ship. Wt. CB 231
37145 RCS-158 Replacement Blade: 6.02”
Length: 3.84 oz.
Ship. Wt.

[email protected]

G10 CABLE PULLING, HANDLING & PREP

Tools for Underground Primary Distribution

A. WS 15 - Adjustable Semi-con Scoring Tool

• For ”strippable” semi-con insulation shield for cable ODs up to

1.75 in (44.45 mm)

• Blade can be preset for any shield thickness

• Peelable in one continuous piece

• Scores in helical, spiral pattern approx. 1/2” (12.70 mm) wide

• Guarded cutting blade prevents injury

• Made in the USA

• U.S. Patent No.: 3,535,785

• Japan: 832,776

• Replacement blade: CB 16

• Length: 4”

A. • Ship Wt. 9 oz.

Cat. No. Cable OD Range Score Depth

(inch) (mm) (mils) (mm)

10800 .688 - 1.750 17.48 - 44.45 1 to 125 .025 - 3.175

——————————

B. BPA, BP1A & BP2A - Adjustable Blade Banana Peeler

CABLE PULLING, • Adjustable blade semi-con scoring tool
HANDLING & PREP
• Scoring depth from 1 to 90 mils (.025 to 2.286 mm)

• For “strippable” semi-con URD cable shield

• One hand scoring of circumference and length

B. • Spring-loaded blade for scoring precisely
• Teflon coated cable guide

• Unique cartridge adapts to out-of-round cables

• Semi-con removes cleanly with no damage to underlying insulation

• U.S. Patent No.: 4,955,137

• Replacement blade: 34230

• Length: 9.4”

• Ship Wt. 13 oz.

Cat. No. Model No. Cable O.D. Range
35250 BP A 375 - 750”
34244 BP 1A
34245 BP 2A 750 - 1250”

1250 - 2000”

——————————

C. C. IC1 & IC2 - Insulation Chamfer Tools

www.americansafety.com For .650 to 1.875” (16.51 to 47.63 mm) cable OD Chamfers 15 to
35 KV cable. Creates a 45° bevel, approx. .125” (3.17 mm) long.
XLPE insulations. Works for Okonite and 3728 EP insulations.
Perfect for premolded splices and terminations. Complete
operation 10 seconds or less. Adjusts easily to fit different cable
insulations. Recessed blade prevents injury and blade damage.

Cat. No. Model Cable OD Range Diameter Ship. Wt.
No. (in) (mm) (in) (mm)
34760 10 oz.
34825 IC1 .650-1.260 16.51-32.00 3 1/2 88.9 12.5 oz.
1.250-1.875 31.75-47.63 4 3/16 106.4
IC2

24 hour Fax (704) 481-0450

CABLE PULLING, HANDLING & PREP G11

Tools for Underground Primary Distribution

D. WS 5 - End Strippers D.
• For 600 volt to 35 KV cables
• .260 to 1.265 in (6.60 to 32.13 mm) cable OD
• Strips XLPE, Polyethylene and EPR insulation
• Precision stripping of insulation only or insulation and
semi con simultaneously
• Ideal for primary URD cable
• Guarded cutting blade prevents injury
• WS 5 and WS 5DA permit accurate preset stripping lengths
of up to 4 in (101.60 mm). Bar removable for infinite stripping
• Accepts SW 2 ratchet wrench for leverage
• Stop bar with drill adapter can be purchased separately or
comes with WS 5DA. Metric stop bar is also available
• Bushing insert fits over cable
- Bushing insert presets cutting blade depth
- Bushing can be changed easily and quickly

E. WS 5A - Adjustable End Strippers
• Upgraded model of the WS 5
• Same basic function as the WS 5 Model plus:
- Adjustable strip stop with rotary mechanism eliminates the
need for hex wrench
- Adjustment window, with inch and metric readings allows easy
setting of stop for precise strip length
• Strip lengths from 0.625 in (15.9 mm) up to 2.5 in
maximum (63.5 mm)
• For 600 volt to 35 KV cables
• 0.260 to 1.265 in (6.60 to 32.13 mm) Cable OD
• Strips XLPE, polyethylene, and EPR insulation up to 400 mils thick
• Precision stripping of insulation only or with semi con over insulation
• Ideal for primary URD cable
• Guarded cutting blade prevents injury
• Accepts SW 2 ratchet wrench for leverage
• WS 5A-DA comes with 3/8” drill adapter CABLE PULLING,
• Made in USA HANDLING & PREP
• Length: 8 in.
• Weight: 1.2 lb.

• Replacement Blade CB 7-2

ORDERING INFORMATION: Choose tool and bushing (below)

Cat. No. Model No. Insulation Insulation Thickness Replacement Rotating E.

Materials Max. (mils) Blade Stop Bar

D. 10346 WS 5 XLPE or 400 CB 7-2 10346
10337
E. 10337 WS 5DA EPR

BUSHING SELECTION These tables should only be used as a guide. Cable
TABLE samples should be provided to ASUC to ensure proper
sizing

Cable OD to be shipped Bushing # Cable OD to be stripped Bushing #

(inch) (mm) (inch) (mm)

.260 - .285 6.60 - 7.24 WS 5-.300 .761 - .785 19.33 - 19.94 WS 5-.800
.286 - .310 7.26 - 7.87 WS 5-.325 .786 - .810 19.96 - 20.57 WS 5-.825
.311 - .335 7.90 - 8.51 WS 5-.350 .811 - .835 20.60 - 21.21 WS 5-.850
.336 - .360 8.53 - 9.14 WS 5-.375 .836 - .860 21.23 - 21.84 WS 5-.875

.361 - .385 9.17 - 9.78 WS 5-.400 .861 - .885 21.87 - 22.48 WS 5-.900
.386 - .410 9.80 - 10.41 WS 5-.425 .886 - .910 22.50 - 23.11 WS 5-.925
.411 - .435 10.44 - 11.05 WS 5-.450 .911 - .935 23.14 - 23.75 WS 5-.950
.436 - .460 11.07 - 11.68 WS 5-.475 .936 - .960 23.77 - 24.38 WS 5-.975

.461 - .485 11.71 - 12.32 WS 5-.500 .961 - .985 24.41 - 25.02 WS 5-1.000
.486 - .510 12.34 - 12.95 WS 5-.525 .986 - 1.010 25.04 - 25.65 WS 5-1.025
.511 - .535 12.98 - 13.59 WS 5-.550 1.011 - 1.035 25.67 - 26.29 WS 5-1.050
.536 - .560 13.61 - 14.22 WS 5-.575 1.036 - 1.060 26.31 - 26.92 WS 5-1.075

.561 - .585 14.25 - 14.86 WS 5-.600 1.061 - 1.085 26.95 - 27.56 WS 5-1.100 Stop Bar
.586 - .610 14.88 - 15.49 WS 5-.625 1.086 - 1.110 27.58 - 28.19 WS 5-1.125 with Drill
.611 - .635 15.52 - 16.13 WS 5-.650 1.111 - 1.135 28.22 - 28.83 WS 5-1.150 Adapter
.636 - .660 16.15 - 16.76 WS 5-.675 1.136 - 1.060 28.85 - 29.46 WS 5-1.175
Call Toll Free (800) 438-6013
.661 - .685 16.79 - 17.40 WS 5-.700 1.161 - 1.185 29.49 - 30.10 WS 5-1.200
.686 - .710 17.42 - 18.03 WS 5-.725 1.186 - 1.210 30.12 - 30.73 WS 5-1.225
.711 - .735 18.06 - 18.67 WS 5-.750 1.211 - 1.235 30.76 - 31.37 WS 5-1.250
.736 - .760 18.69 - 19.30 WS 5-.775 1.236 - 1.260 31.39 - 32.00 WS 5-1.275
1.261 - 1.285 32.03 - 32.64 WS 5-1.300

[email protected]

G12 CABLE PULLING, HANDLING & PREP

Tools for Underground Primary Distribution

A. WS 6 - End Strippers

• For 15 to 46 KV cables

• .900 to 2.030 in. cable OD

• Strips XLPE, polyethylene and EPR insulation

• Precision stripping with NO conductor damage

• Guarded cutting blade prevents injury

• Rotating stop bar permits accurate preset stripping lengths of

up to 2-7/16 in. Bar removable for infinite stripping

• WA 1 adapter permits use of SW 2 ratchet wrench

• WA 3 adapter allows strip lengths up to 5 1/2 in

A. and the use of SE 2 ratchet.
• Stop bars with drill adapter can be purchased separately or

standard with WS 6DA, inch and metric versions available

• Bushing insert fits over cable

- Bushing insert presets cutting blade depth

- Bushings can be changed easily and quickly

• Made in USA

• Length: 6.5 in.

• Ship. Wt. 1.5 lb.

ORDERING INFORMATION: Choose tool and bushing (below)

Cat. No. Model No. Strip Length Replacement Rotating
Blade Stop Bar
CABLE PULLING, (inches) (mm)
HANDLING & PREP
12900 WS 6 1/2 - 2 7/16 12.70 - 61.90 12928
12917 WS 6 with WA 1

WA 1 12918 WS 6 with WA 3 1/2 - 5 1/2 12.70 - 139.70 CB 8-2 12931
Wrench 12950 WS 6DA 1/2 - 2 7/16 12.70 - 61.90 12953
Adapter 12951
WS 6DA with WA 1

12952 WS 6DA with WA3 1/2 - 5 1/2 12.70 - 139.70 12954

BUSHING SELECTION TABLE These tables should only be used as a guide. Cable samples
should be provided to ASUC to ensure proper sizing

WA 3 Cable OD to be shipped Bushing # Cable OD to be stripped Bushing #
Wrench
Adapter (inch) (mm) (inch) (mm)

Stop Bars 0.961 - 0.985 24.41 - 25.02 WS 6-1.000 1.436 - 1.460 36.47 - 37.08 WS 6-1.475
with Drill 1.986 - 1.010 25.04 - 25.65 WS 6-1.025 1.461 - 1.485 37.11 - 37.72 WS 6-1.500
Adapter 1.011 - 1.035 25.68 - 26.29 WS 6-1.050 1.486 - 1.510 37.74 - 38.35 WS 6-1.525
1.036 - 1.060 26.31 - 26.92 WS 6-1.075 1.511 - 1.535 38.38 - 38.99 WS 6-1.550
www.americansafety.com
1.061 - 1.085 26.95 - 27.56 WS 6-1.100 1.536 - 1.560 39.01 - 39.62 WS 6-1.575
1.086 - 1.110 27.58 - 28.19 WS 6-1.125 1.561 - 1.585 39.65 - 40.26 WS 6-1.600
1.111 - 1.135 28.22 - 28.83 WS 6-1.150 1.586 - 1.610 40.28 - 40.89 WS 6-1.625
1.136 - 1.160 28.85 - 29.46 WS 6-1.175 1.611 - 1.635 40.92 - 41.53 WS 6-1.650

1.161 - 1.185 29.49 - 30.10 WS 6-1.200 1.636 - 1.660 41.55 - 42.16 WS 6-1.675
1.186 - 1.210 30.12 - 30.73 WS 6-1.225 1.661 - 1.685 42.19 - 42.80 WS 6-1.700
1.211 - 1.235 30.76 - 31.37 WS 6-1.250 1.686 - 1.710 42.82 - 43.43 WS 6-1.725
1.236 - 1.260 31.39 - 32.00 WS 6-1.275 1.711 - 1.735 43.46 - 44.07 WS 6-1.750

1.261 - 1.285 32.03 - 32.64 WS 6-1.300 1.736 - 1.760 44.09 - 44.70 WS 6-1.775
1.286 - 1.310 32.66 - 33.27 WS 6-1.325 1.761 - 1.785 44.73 - 45.34 WS 6-1.800
1.311 - 1.335 33.30 - 33.91 WS 6-1.350 1.786 - 1.810 45.36 - 45.97 WS 6-1.825
1.336 - 1.360 33.93 - 35.54 WS 6-1.375 1.811 - 1.835 46.00 - 46.61 WS 6-1.850

1.361 - 1.385 34.57 - 35.18 WS 6-1.400 1.836 - 1.860 46.63 - 47.24 WS 6-1.875
1.386 - 1.410 35.20 - 35.81 WS 6-1.425 1.861 - 1.885 47.27 - 47.88 WS 6-1.900
1.411 - 1.435 35.84 - 36.45 WS 6-1.450

24 hour Fax (704) 481-0450

CABLE PULLING, HANDLING & PREP

G13Tools for Underground Primary Distribution

B. SW-2 - Wrench - The SW-2 has a ratchet mechanism. SW-2
wrenches can be used for added leverage on all SST and DST

tools. Use with all WS 5 and WS 6 Strippers

Cat. No. 10500 B.
C.
——————————
WS7, WS7A, WS8 & WS8A - URD Pencilling Tools E.
F.
FEATURES:

• For 5 to 35 KV URD cables

• #8 to 1000 MCM Cable OD

• One tool for each cable/conductor size

• For XLPE, polyethylene and some EPR insulations

• Fast, smooth tapers, no conductor damage

• Safety assured with guarded cutting blade

• Accepts SW 1 and SW 2 wrenches for additional turning leverage

• Length: 5”

• Ship Wt.: 1 lb.

C. WS 7A & WS 8A 8 to 1000 MCM
Max. Cable Size: 1 1/2”
Nominal Taper: CB 5A
Replacement Blade: .500-1.900”
Cable OD:

Cat. No. Model No. D. CABLE PULLING,
16610 WS 7A HANDLING & PREP
16620
WS 8A

D. WS 7 8 to 350 MCM
Max. Cable Size: 2 1/2”
Nominal Taper: CB 5
Replacement Blade: .500-1.210”
Cable OD:

Cat. No. 10900

E. WS 8 1/0 to 1000 MCM
Max. Cable Size: 2 1/2”
Nominal Taper: CB 5
Replacement Blade: 1.200-1.900”
Cable OD:

Cat. No. 11100

——————————
F. WS 49 - Airport Lighting Cable End Stripper/Penciller

FEATURES:

• For 0.5” taper cuts of #8, 5KV K-824 Type C airport

lighting cable

• End strip 0.75”, pencils 0.5”

• Long lasting, guarded cutting blades

• Bushings (.395”, .420”, .445”, & .490”) compensate for variation in

cable diameter

• Replacement blades: CB 6667, end strip; CB 94, pencil

• Length: 3.47”

• Ship Wt. 9.94 oz.

Cat. No. 27700

[email protected] Call Toll Free (800) 438-6013

CABLE PULLING, HANDLING & PREP

G14 Tools for Underground Primary Distribution

A. 1700 & 1800 Series - Semi-Con Scorers - Models 1700
and 1800 Semi-Con scorers are designed to score (scribe) the
extruded semi-conductive shield of high voltage cable so that the
semi-con can be removed without nicking or damaging the cable
insulation. Removal of PVC outer jackets can be also be done
with the scorer. for those who prefer to adjust the scorer blade
depth for variations in semi-con thickness, the adjustable blade
scorers have a thumb wheel with a red dial that has a calibrated
A. setting of .001” to .100”. The adjustable blade Semi-Con scorers
B. are available with square cut and spiral cut settings. Once the
square scoring is performed at the correct strip back point, the
C. blade lever is moved to the spiral setting and the tool is rotated
to the end of the cable. Width of spiral cut can be changed with
D. a simple adjustment. Adjustable blade depth, square cut and
spiral cut. Cable OD range 1/2” to 3” for #1800. Scores (scribes)
www.americansafety.com semi-con without damage to insulation. Leaf springs maintain
constant pressure during operation for #1700. Coil springs
maintain constant pressure during operation for #1800. 1 3/4” is
the minimum size cable for OD #1800 will work on.
Cat. No. Description Ship. Wt.
1700 Scorer with square/spiral cut 1.75 lbs.
1700-SS Scorer with locking blade 1.75 lbs.
1800 Scorer with square/spiral cut 1.75 lbs.
1678 Replacement Blade N/A

——————————

B. 1700 & 1800 Series - Semi-Con Scorers - Precise blade
depth adjustment, spiral cut and square adjustment, cable range
1/2” to 1 3/4” (12.7-44.5 mm), maximizes reliability of installation,
provides greater speed and increased safety. No bushing required.
CABLE PULLING, Cat. No. Description Ship Wt.
HANDLING & PREP 1542-2CL Scorer 2.35 lbs.
1562 Replacement Blade - Wedge Cut N/A
1581 Replacement Blade - Straight Cut N/A

——————————

C. TSW-4550 Torque Spanner Wrench - For 600 amp Separable
Connector Systems. Provides quick, easy installation of connector
plugs, reducing tap plugs and reducing tap wells. Prevents
over-tightening which could lead to premature failures or loose
connections. Eliminates the need for an external torque wrench
or wrench length calculations. Long spanner prong torque (50-60
ft-lb) as recommended by the manufacturer.

Length: 14 3/8”
2 lb. 3 oz.
Ship. Wt.
Cat. No. 35925

——————————

D. Secondary Torque Tool -

• Designed with factory preset torque values to ensure accuracy

• Two torque settings

• Torque settings are changed by pushing the handle up and turning

clockwise until tool stops. This sets the maximum torque. Push

the handle up and turn it counterclockwise until it stops to set the

minimum torque.

• Comes with 5/16” hex wrench that snaps in the tool, allowing

proper torque on different types of connectors

• Ratchet head helps tighten connectors in tight locations

• Simply reverse the wrench to loosen connectors

• Available with single torque setting on request

• Length: 9.75”

• Ship. Wt. 2 lbs. 3 oz.

Cat. No. Description
STT2030 20 ft. lbs. & 30 ft. lbs. torque settings
STT2030-INSULATED Insulated; 20 ft. lbs. & 30 ft. lbs. torque
settings
STT3040 30 ft. lbs. & 40 ft. lbs. torque settings
STT3040-INSULATED Insulated; 30 ft. lbs. & 40 ft. lbs. torque
settings

24 hour Fax (704) 481-0450

CABLE PULLING, HANDLING & PREP G15

Underground Primary & Speciality Distribution Tools

dEe. lPivITer1yTsLyosatedmB-reak Probe Insertion Tool with 125’ lb. torque

• For 15 to 35 kV cables

• For quick and easy insertion of the probe inside the elbow

• Prevents load break probe construction

• Prevents load break probe breakage E.

• Provides the proper tightening forces as recommended by the

elbow manufactures

• Multiply torque delivery system: Delivers 125’ lb. torque; Adjustable

and removable ”T” Handle; Moment arm for tight locations 7/8” steel

drive and wrench for ChannelLocks; 3/8” square drive socket

• Load break probe quickly removed by simply reversing the

tightening action

• Available for all load break elbows

• U.S. Patent No. 5,605,082

• Length: 9.375”

• Ship. Wt. 1 lb. 4 oz.

Cat. No. 35105

——————————
F. PIT 2 Load Break Probe Insertion Tool -

• For 35 kV RTE Load Break Elbow

• 1” hex on end of tool

• Prevents probe arc follower contamination

• Prevents probe arc follower breakage

• Available for all load break elbows CABLE PULLING,
HANDLING & PREP
• Length: 10”

• Ship. Wt. 1 lb. F.

Cat. No. 27620 G.
H.
——————————
G. LBIT-1T Load Break Bushing Insertion Tool -

• For 200 amp Bushing Inserts with Internal Hexagon socket drive

• Preset torque setting of 180’ lb.

• Secures bushing insert for positive installation and removal

• Available with hotstick eye (LBIT-1TR)

• Multiple Drive system: Adjustable “T” Handle; 3/8” square socket

drive; 7/8” hexagon for wrench

• Length: 14.12”

• Ship. Wt. 1.3 lbs.

Cat. No. 35900

——————————
H. MBTT-150 Meter Base Torquing Tool -

• Allows proper installation of Landis & Gyr “K” Base 3 Phase or

similar meters without stopping, sparking or flashover

• Tool is insulated and isolated from meter base with composite

shaft which is rated to 1000V

• Prevents over and under tightening with 150’ lb. preset torque

setting accurate to +/- 15’ lb.

• 1/2” square socket drive accepts magnetic installation

socket

• Adjustable T handle

• 3/8” square socket torque test point

• Length: 13.65”

• Ship. Wt.: 1.18 lbs.

Cat. No. 36390

[email protected] Call Toll Free (800) 438-6013

G16 CABLE PULLING, HANDLING & PREP

Tools for Transmission Cable

A. WS 51 - Transmission Cable Semi-con Removal

• For solid dielectric transmission cables

• 1.5 to 4” semi-con diameter

• Cable specific shield removal

• Uses master shaving bushing which holds cutting blade and

adapter sleeve for one cable size

• Easily used by one person

• Cables should be end-stripped to bare the conductor prior to

removal of insulation shield (uses WS 50, WS 57 & WS 13B)

• 115 volts AC

• Length: 27 in.

• Height: 10 in.

• Ship. Wt.: Completed 25 lb.

- Shaving bushing 2 lb.

- Adapter sleeve 1 lb.

Cat. No. 21700

ORDERING INFORMATION: Cable samples required

Master O.D. Over Semi-con Replacement
Shaving Blade Bushing
(in) (mm)
MSBK CB 40X
CABLE PULLING, MSBJ 1515 - 2065 38.48 - 52.45 CB 40X
HANDLING & PREP MSBI 2040 - 2565 51.82 - 65.15 CB 40X-1
MSBG 2565 - 3065 65.15 - 77.85 CB 40X-2
MSBG 3040 - 3290 77.22 - 83.57 CB 40X-3
MSBG 3300 - 3540 83.82 - 89.92 CB 40X-4
MSBH 3550 - 3765 90.17 - 95.63 CB 40X-5
MSBH 3765 - 3890 95.63 - 98.81 CB 40X-6
3900 - 4015 99.06 - 101.98

MSBK MSBJ MSBI MSBG MSBH
Adapter Sleeve # Adapter Sleeve # Adapter Sleeve # Adapter Sleeve # Adapter Sleeve #
21740 - (inch) 21739 - (inch) 21737 - (inch) 21741 - (inch) 21738 - (inch)
Check Ring # Check Ring # Check Ring # Check Ring # Check Ring #
20570 - (incb) 20570 - (inch) 20570 - (inch) 20570 - (inch) 205270 - (inch)

(inch) (mm) (inch) (mm) (inch) (mm) (inch) (mm) (inch) (mm) (inch) (mm)

1.525 38.74 2.050 52.07 2.575 65.41 3.050 77.47 3.475 88.27 3.775 98.89
1.550 39.37 2.075 52.71 2.600 66.04 3.075 78.11 3.500 88.90 3.800 96.52
1.600 40.64 2.125 53.98 2.650 67.31 3.125 79.38 3.525 89.54 3.850 97.16
1.625 41.28 2.150 54.61 2.675 67.95 3.150 80.01 3.550 90.17 3.875 98.43
1.650 41.91 2.175 55.25 2.700 68.58 3.175 80.65 3.575 90.81 3.900 99.06
1.675 42.55 2.200 55.88 2.725 69.22 3.200 81.28 3.600 91.44 3.925 99.70
1.700 43.18 2.225 56.52 2.750 69.85 3.225 81.92 3.575 90.81 3.950 100.33
1.725 43.82 2.250 57.15 2.775 70.49 3.250 82.55 3.600 91.44 3.975 100.97
1.750 44.45 2275 57.97 2.800 71.12 3.275 83.19 3.625 92.08 4.000 101.60
1.775 45.09 2.300 58.42 2.825 71.76 3.300 83.82 3.650 92.71 4.025 102.24
1.800 45.72 2.325 59.06 2.850 72.39 3.325 84.46 3.675 93.35
1.825 46.36 2.350 59.69 2.875 73.03 3.350 85.09 3.700 93.98
1.850 46.99 2.375 60.33 2.900 73.66 3.375 85.73 3.725 94.62
1.875 47.63 2.400 60.96 2.925 74.30 3.400 86.36 3.750 95.25
1.900 48.26 2.425 61.60 2.950 74.93 3.245 87.00 3.775 95.89
1.925 48.90 2.450 62.23 2.975 75.57 3.450 87.63
1.950 49.53 2.475 62.87 3.000 76.20
1.975 50.17 2.500 63.50 3.025 76.84
2.000 50.80 2.525 64.14 3.050 77.47
2.025 51.44 2.550 54.77 3.075 78.11
2.050 52.07 2.575 65.47
2.075 52.71

www.americansafety.com 24 hour Fax (704) 481-0450

CABLE PULLING, HANDLING & PREP

G17Tools for Transmission Cable

B. WS 51A - Adjustable Transmission Cable Semi-con Shield
Removal
• For solid dielectric transmission cables

• Primarily for cable manufacturers’ in-factory use, where different

size cables are being used frequently B.

• Continuously adjustable chuck-like clamp locks over the cable with

two sets of removable jaws

Jaw set A - 1.815 to 3.065” cable OD

Jaw set B - 2.875 to 4.125” cable OD

• Jaws are interchangeable

• Removes semi-con insulation at a rate of 25 inches per minute

• Perfect for preparing long lengths for in-factory cable testing

• 115 volts AC

• Made in the USA

• Replacement Blade: CB 40X-5

• Length: 27”

• Height: 10”

• Ship. Wt. 37 lbs.

Cat. No. Description
22100 WS 51A 115 VAC

——————————

C. WS 37 - Curved Taper High Voltage Pencilling Tool
• For Transmission and Distribution Cables

• Designed and built to specification based on insulation thickness and OD C.
D.
• For Hot Splice™ cable preparation

• Insulation should be stripped with WS 50, WS 57 or WS57A

prior to pencilling

• Semi-con insulation should also be removed prior to pencilling

with WS9A/9C, WS40, WS51, WS51A or 57A CABLE PULLING,
HANDLING & PREP
• U.S. Patent No. 3,566,466

• Replacement Blade: CB 47 3” radius

CB 99 5 1/2” radius

• Length: (Dependent on

specific cable)

• Ship. Wt. (Dependent on

specific cable)

Cat. No. Description E.
21900 WS 37 2 1/2” taper length

21954 with CB 47 blade
WS 37 2 1/2” taper length

with CB 99 blade

——————————

High Voltage Pencilling Tools
• For Transmission and Distribution Cables

- WS 16 for 35 to 69 kV cables, 1/0 to 1000 MCM

- WS 17 for 35 to 46 kV cables, 1/0 to 750 MCM F.

- WS 14A for 69 to 238 kV

cables, 2000 MCM plus

• Complete pencilling operation takes less

than five minutes

• Can expose conductor strand shielding

if required

• One tool for each cable/conductor size Cat. No. Model Operation Replacement Taper Length Tool Length Approx. Weight
• Fast, smooth tapers Blade (inch) (mm) (lb) (Kg)
(inch) (mm) 6 2.70
• Safety assured with guarded cutting blade 8 203.20 3 1.35

• U.S. Patent No. 3,533,313 20432 D. WS 16 Plastic CB 5B 2 50.80 15 6.80
• Made in the USA 20433 Handles
• Insulation on cable end must be stripped Wrench SW 2 CB 5B-4 2 - 4 50.80 - 101.60 Average

prior to pencilling. Use Model WS50, 13400 E. WS 17 Wrench SW 4 CB 15A - 4 4 101.60
CB 15A - 6
WS 57, WS 57A or WS 13B end strippers. 10840 CB 15A - 8 4-6 101.60 - 152.40 330.20
Semi-con shield should also be removed CB 15A - 10 6-8 152.40 - 203.20 13 to 20 to
CB 15A - 12 8 - 10 203.20 - 254.00
prior to pencilling with WS 9A/9C, WS 40, 10841 CB 15A - 14 10 - 12 254.00 - 304.80 506.00
12 - 14 304.80 - 355.60
WS51, WS51A or WS 57A. 10842 F. WS 14A depending on
ORDERING INFORMATION: 10843 taper length

• Cable sample and termination 10844

specification sheet required 10845
• Long tapers are available on request

[email protected] Call Toll Free (800) 438-6013

CABLE PULLING, HANDLING & PREP

G18 Tools for Transmission Cable

A. WS 70 - Adjustable Cable Stripper

• End strips outer jacket or insulating material on 46 to 69KV cable

• 1.9 in (48 mm) to 3.65 in (93 mm) OD cable range

• Fine adjustment feature for blade

• Tool is self-feeding during stripping operation

• Dual handle design gives greater leverage

• Made in the USA

• Replacement Blade CB265

• Length: 17.5 in.

• Ship. Wt.: 3.3 lbs.

Cat. No. 42040

A. ——————————

B. WS 13B - Transmission Cable End Stripper

• For solid dielectric transmission cables to 230 KV

• 3.75 to 5.25 in (95.25 to 133.35 mm) cable OD

• Insulation thickness 100 to 900 mils (2.54 to 22.86 mm)

• Strips tough, high density outer jackets

• Strips polyethylene insulation with insulation shield

• Bushing inserts adapt tool to cable

- One bushing required for jacket removal

- One bushing required for insulation removal

• Bushings fit insert for clean, precise stripping

• Made in the USA

• Replacement Blade: CB13B

B. • Length: 30 in.

CABLE PULLING, • Ship. Wt.: 18 lbs.
HANDLING & PREP
Cat. No. 11700

——————————

C. WS 9D & WS 9E - Transmission Semi-con Shaving Tools

• For shaving bonded semi-con from transmission voltage cables

• Radius or taper cut of semi-con shield

• Shaves in a helical, spiral pattern

• Aluminum Oxide Kit (TK 1) can be used for additional smoothing

• Made in the USA

• Length: 16.2 in.

• Ship. Wt.: 2.74 lbs.

C. Cat. No. Model Cable O.D. Range Style of Cut Replacement
No. Blade
(inch) (mm)

38035 WS9D 1.90 to 48.3 to Radius Cut CB 40X
28215-3 WS9E 3.625 92.1 Taper Cut CB 98

——————————

D. WS 9S Series - Semi-con Shaving Tools

• For shaving bonded semi-con cables

• Radius or taper cut of semi-con shield

• Shaves in a helical, spiral pattern

• Aluminum Oxide Kit (TK 1) can be used for additional smoothing

• Made in the USA

• Length: 8 in.

• Ship. Wt. 1.9 lbs.

Cat. No. Model No. Cable O.D. Range Style of Cut Replacement
Blade
(inch) (mm)

38430 WS9S 0.50 to 12.7 to Radius Cut CB 40X
2.50 63.5

38435 WS9S-T 1.80 to 45.7 to Taper Cut CB 98
2.50 63.5

www.americansafety.com 24 hour Fax (704) 481-0450

CABLE PULLING, HANDLING & PREP G19

Tools for Transmission Cable

E. WS 57 - Adjustable End Stripper/Jacket Stripper

• For 45 to 115 KV cables

• 2.0 to 4.25 in (50.80 to 108.00 mm) cable OD

• Quick-slide adjustment for cable sizing

• Easy setting of blade cutting depth

• For XLPE, polyethylene, and EPR insulations

• Blade angle adjusts easily to control width of end strip cut

• Made in the USA

• Replacement Blade CB144 E.

• Length: 24 in.

• Ship. Wt.: 7 lbs.

Cat. No. 34320

——————————

F. WS 57A - Adjustable End Stripper/Jacket F. CABLE PULLING,
Stripper and Semi-con Shaver H. HANDLING & PREP

• Same features as WS 57 plus

• Adjustable semi-con shaving blade system

• Made in the USA

• Replacement Blades

- CB 40X shaving blade

- CB 144 end stripping blade

• Length: 24 in.

• Ship. Wt.: 7 lbs.

Cat. No. 34735 I.
K.
——————————G.

Ripley Accessories

Cat. No. Model No. Description L. O.
G. 12920 WA 1 Wrench Adapter N. J. M.
H. 36312 URD URD Bag
I. 12930 WA 3 Wrench Adaptor
J. 11000 AR 9 Allen Wrench Set
K. 10700 SW 4 Hand Ratchet Wrench
L. 34687 34687 Super Stripper Tool Case

Size: 13” x 10” x 4.5” (Tools Not Included)

M. 10500 SW-2 Ratchet Wrench
(use with WS 5 & WS 6)

Honing Stone Set
N. 15460 HS 1 Blue Metal Tool Chest

O. 21777 TC 104 Size: 29.5” x 11.5” x 14”



[email protected] Call Toll Free (800) 438-6013

CABLE PULLING, HANDLING & PREP

G20 Kearney Cumalongs

Kearney Cumalongs - The exclusive wedge-grip action provides
a positive, tight grip on the conductor for non-kinking, in-line pull.
Kearney Cumalongs are easily installed and removed with a tie
stick. When the tie stick is removed from the ring, the safety latch
drops over the conductor. For faster, easier operation, right and
left hand styles enable the lineman to always have the conductor
slot facing him. All models except 16847 Series include hardened
steel rollers for easier opening and positive holding. Wedges are
bronze, except 1833-14 (Steel) and 130429 Bodies are Aluminum,
except 1833-2 and -3 (Bronze).
A. Model 16847 & 16847-1

A. Conductor Range: 2-7 str - .292” (Max); 8 sol - . 128” (Min)
B.
C. Maximum Working Load: 2,000 lbs.
Replacement Wedge: 16960
D.
Ship. Wt. 2.8 lbs.

Cat. No. Description
16847 Left Hand Model
16847-1 Right Hand Model

B. & C. Model 1833-2 & 1833-3

Conductor Range: 4/0 ACSR - .563” (Max); 8 sol - .128” (Min)

Max Working Load: 6,000 lbs.

Replacement Wedge: 1833-14

Cat. No. Description
B. 1833-2 Left Hand Model
C. 1833-3 Right Hand Model

CABLE PULLING, Model 1833-4 & 1833-5
HANDLING & PREP
Conductor Range: *795 ACSR - 1.050” (Max);
2 sol - .258” (Min)

*795 ACSR when diameter of specific stranding does not exceed 1.050” (Not for use with guy wire)

Maximum Working Load: 5,500 lbs.
Replacement Wedge: 1833-44

Ship Wt. 9.35 lbs.

Cat. No. Description
1833-4 Left Hand Model
1833-5 Right Hand Model

Model 1833-22 & 1833-21

Conductor Range: 954 Str. - 1.126” (Max); 4/0 ACSR - .563” (Min)

Maximum Working Load: 5,500 lbs.

Replacement Wedge: 1833-24

Cat. No. Description
1833-22 Left Hand Model
1833-21 Right Hand Model

Model 130428

Conductor Range: 1590 ASCR - 1.545” (Max); 266.8 str - .586” (Min)

Maximum Working Load: 15,000 lbs.

Replacement Wedge: 135105-1

Cat. No. Description
130428 Right Hand Model

D. Model 130428-1

Conductor Range: 1590 ASCR - 1.545” (Max);

266.8 str - .586” (Min)

Maximum Working Load: 4,000 lbs.
Replacement Wedge: 130429

Cat. No. Description
130428-1 Right Hand Model

www.americansafety.com 24 hour Fax (704) 481-0450

CABLE PULLING, HANDLING & PREP

G21Klein® Grips

Selecting the Proper Grip - Three basic factors are needed in order to deter- Recommended for: Weatherproof and PVC Steel Strand Wide
ACSR and AAC Covered Copper Cat. No. Range of
mine the proper grip for each specific application: Cat. No. Cat. No. Cables
Cat. No.
1. Type of wire or cable (ACSR, AAC, Copper, Steel Strand).
2. AWG or MCM (Diameter) of wire or cable. 1613-30
3. Maximum safe load required.

• Simple three-point contact jaws.
• Designed for use on small diam-
eter bare wire and cable (solid and
stranded).

Single V

Double V • Four-point contact provides greater 1628-16P SERIES Notched Jaw 1613-40 and 1613-40H, 1671-10
Round gripping pressure and assures proper 1628-30 SERIES, 1628-40 1611-20, 1611-30, 1628-16, 1628-16AT (Bell 1672-10
Eccentric alignment of wire and cable within SERIES, 1628-50 SERIES, 1656- 1611-40, 1611-50 System), 1628-17, 1628-18, 1686-10
the jaws. 20 and 1656-20H, 1656-30 and Serpentine Jaw 1684-5, 1684-5AT (Bell 1686-20
• Designed for high-strength messen- 1656-30H, 1656-40 and 1656-40H, 1659-20, 1659-30, System), 1684-5H, 1692-5,
ger and guy strand and extra-high- 1656-50 and 1656-50H, 1656-60 1659-40, 1659-50 1692-5AT (Bell System), 1685-20
strength cables and conductors, as and 1656-60H, 1678-20, 1678-30, 1684-74 and S1684-74H 1685-31
well as a wide range of cables. 1678-40, 1678-50 (EHS Cable), 1684-5F

• Round jaws provide maximum con- Serpentine Jaw
tact and gripping power to minimize 1659-5AT
conductor deformation. (smooth and
knurled styles) 1604-10, 1604-20, 1604-20L, CABLE PULLING,
• Recommended for us on bare 1625-20 (For Wire Rope), HANDLING & PREP
aluminum, ACSR, AAC and copper 1625-20 1 (For Wire Rope),
conductors as well as a wide range 1625-20 7/8 (For Wire Rope)
of cables.

• Eccentric jaw applies gripping
pressure to 1/4” of cable area.
• Recommended for use when
conductor deformation is not an issue.
• Available only on the Haven’s Grips.

Parallel Jaw Grips

Parallel Jaw Grips - Wide Range of Cables - 1685 Series

• Lightweight, compact grips pull an exceptionally wide range of cable
types and sizes.

• Designed with a round inside-jaw contour for maximum contact to
minimize cable deformation.

• Lower jaw is serrated to firmly grip insulated cables and conductors.
• Design includes a latch that prevents the grip from falling in case of jaw

disengagement from the cable.
• Large-diameter eye accommodates large hooks on hoists, winches, and

tackle blocks.

Cat. No. Min. to Max. Cable Jaw Length Approx. Weight Each 1685-20
Diameter inches(mm)
1685-31
4,500 lbs. (2,041 kg) Maximum Safe Load
1672-10
1685-20 .157” - .875” (4 - 22 mm) 2 1/2” (64 mm) 3 lbs. (1.30 kg)
Call Toll Free (800) 438-6013
7,500 lbs. (3,400 kg) Maximum Safe Load 4 1/2” (114 mm) 5 lbs. (2.27 kg)
1685-31 .625” - 1.250” (16 - 32 mm)

Parallel Jaw Grips - 1686-10, 1686-20, 1671-10 and 1672-10.

• Longer jaws achieve a firm hold, reducing possibility of slippage and
deformation to cable.

• Designed with a Double V jaw contour, a latch, plus a large-diameter eye
that accommodates large hooks on hoists, winches, and tackle blocks.

• When latch is closed, it helps maintain cable position in grip jaws.

Cat. No. Min. to Max. Cable Jaw Length Approx. Weight
Diameter inches(mm) Each

10,000 lbs. (4,536 kg) Maximum Safe Load

1686-10 .20” - .40” (5.08 - 10.16 mm) 4 3/8” (111 mm) 5 lbs. (2.27 kg)

1686-21 .20” - .40” (5.08 - 10.16 mm) 4 3/8” (111 mm) 5 lbs. (2.27 kg)
Knurled Jaw
.37” - .75” (9.40 - 19.05 mm) 4 3/8” (111 mm) 5 lbs. (2.27 kg)
1671-10 .37” - .75” (9.40 - 19.05 mm) 4 3/8” (111 mm) 5 lbs. (2.27 kg)

1672-10
Knurled Jaw

[email protected]

CABLE PULLING, HANDLING & PREP

G22 ACSR (Aluminum Conductor Steel Reinforced)

For Cable Diameter A MAXIMUM SAFE LOAD CD

4 AWG - 636 MCM 4,500 lbs. B 15,000 lbs. 20,000 lbs.
(2041 kg) (6803 kg) (9072 kg)
.250” - .953” (6.35 mm - 24.21 mm) 8,000 lbs. Cat. No. Cat. No.
(3629 kg)

AWG or MCM Diameter No. Alum. & Code Cat. No. Cat. No.
Cable Size Inches (mm) Steel Strands Word

4 .250”(6.35) 6x1 Swan 1626-20, 1656-20H & S1656-20H
Swanate
4 .257”(6.35) 7x1 Sparrow 1656-20, 1656-20H & S1656-20H

2 .316”(8.03) 6x1 Separate 1656-20, 1656-20H, S1656-20H,1656-30, 1628-16PE*
1656-30H & S1656-30H
Robin
2 .325”(8.26) 7x1 1656-20, 1656-20H, S1656-20H,1656-30, 1628-16PE*
Raven 1656-30H & S1656-30H

l .354”(9.02) 6x1 Quail 1656-20, 1656-20H, S1656-20H,1656-30, 1628-16PF*
Pigeon 1656-30H & S1656-30H
Penguin
1/0 .398”(10.11) 6x1 Waxwing 1656-20, 1656-20H, S1656-20H,1656-30, 1628-16PG*
Partridge 1656-30H & S1656-30H
Ostrich
2/0 .447”(11.35) 6x1 Merlin 1656-30, 1656-30H & S1656-30H 1628-16PG*
3/0 .502”(12.75) 6x1 Linnet 1628-16PH*
4/0 .563”(14.30) 6x1 Oriole 1656-30, 1656-30H & S1656-30H 1628-16PI*
266.8 MCM .609”(15.47) 18 x 1 Chickadee 1628-16PJ*
266.8 MCM .642”(16.31) 26 x 7 Brant 1656-40, 1656-40H & S1656-40H 1628-16PK*
300 MCM .680”(17.27) 26 x 7 Ibis 1628-16PK*
336.4 MCM .684”(17.37) 18 x 1 Lark 1656-40, 1656-40H & S1656-40H 1628-16PK*
336.4 MCM .720”(18.31) 26 x 7 Pelican 1628-16PL*
336.4 MCM .741”(18.82) 30 x 7 Flicker 1656-40, 1656-40H & S1656-40H 1629-16PL*
397.5 MCM .743”(18.87) 18 x 1 Hawk 1628-16PL*
397.5 MCM .772”(19.61) 24 x 7 Osprey 1656-40, 1656-40H & S1656-40H 1628-16PM*
397.5 MCM .783”(19.89) 26 x 7 Hen 1628-16PM*
397.5 MCM .806”(20.47) 30 x 7 Parakeet 1656-40, 1656-40H & S1656-40H 1628-16PM*
477 MCM .814”(20.68) 18 x 1 Dove 1628-19PM*
CABLE PULLING, 477 MCM .846”(21.49) 24 x 7 Kingbird 1656-40, 1656-40H & S1656-40H 1628-16PN*
HANDLING & PREP 477 MCM .858”(21.79) 26 x 7 Eagle 1628-16PN*
556.5 MCM .879”(22.33) 18 x 1 Peacock 1656-50, 1656-50H & S1656-50H 1628-16PN* 1628-30N*
477 MCM .883”(22.43) 30 x 7 “S” is for spring 1656-50, 1656-50H & S1656-50H 1628-16PN* 1628-30N*
556.5 MCM .914”(23.22) 24 x 7 “H” is for hot latch 1656-50, 1656-50H & S1656-50H 1628-30N*
556.5 MCM .927”(23.55) 26 x 7 1656-50, 1656-50H & S1656-50H * Special order 1628-30N*
636 MCM .940”(23.88) 18 x 1 1656-50, 1656-50H & S1656-50H only. Please 1628-300*
556.5 MCM .953”(24.21) 30 x 7 1656-50, 1656-50H & S1656-50H Allow 30 days 1628-300*
605 MCM .953”(24.21) 24 x 7 1656-50, 1656-50H & S1656-50H for delivery. 1628-300*
1656-60, 1656-60H & S1656-60H 1628-300*
1656-60, 1656-60H & S1656-60H These are not 1628-300*
1656-60, 1656-60H & S1656-60H returnable.
1656-60, 1656-60H & S1656-60H
1656-60, 1656-60H & S1656-60H
1656-60, 1656-60H & S1656-60H
1656-60, 1656-60H & S1656-60H

Hot-line Latch

The hot-line latch is designed for placing a grip on cable with a hotstick.
The three notches in the hot-line latch adjust the balance of the grip to better
match the direction of the cable sag.

• When stick is removed, latch closes automatically to guard 24 hour Fax (704) 481-0450
against grip accidentally disengaging from wire.

• Standard hot-line grips are not supplied with springs or
lock-open features.

www.americansafety.com

CABLE PULLING, HANDLING & PREP

G23ACSR ( Aluminum Conductor Steel Reinforced)

Chicago® Grips

Chicago® Grip - 1656 Series

• Round, smooth inside jaw contour on this series of grips is 1656-30
recommended for bare ACSR.

• Smooth jaws grip with maximum contact and are less likely to
cause cable deformation.

A 4,500 lbs. (2,041 kg) Maximum Safe Load

Cat. No. Hot Latch Hot Latch/Spring Min. to Max. Min. to Max. Cable Jaw Length Approx. Weight
Each
Model No. Model No. Cable AWG Diameter inches(mm)

1656-20 1656-20H S1656-20H 4 - 1/0 .250” - .398” (6.35 - 10.11 mm) 4” (102 mm) 3 lbs. (1.36 kg)

1656-30 1656-30H S1656-30H 2 - 3/0 .325” - .502” (8.25 - 12.75 mm) 4 3/4” (121 mm) 3.75 lbs. (1.70 kg)

B 8,000 lbs. (3,629 kg) Maximum Safe Load

Cat. No. Hot Latch Hot Latch/Spring Min. to Max. Min. to Max. Cable Jaw Length Approx. Weight
Diameter inches(mm) Each
Model No. Model No. Cable AWG or MCM

1656-40 1656-40H S1656-40H 4/0 - 336.4 MCM .563” - .720” (14.30 - 18.29 mm) 5 1/2”(140 mm) 8.30 lbs. (3.76 kg)

1656-50 1656-50H S1656-50H 3.97.5 MCM - 477 MCM .743” - .858” (18.82 - 21.79 mm) 5 1/2”(140 mm) 8.30 lbs. (3.76 kg)

1656-60 1656-60H S1656-60H 477 MCM - 636 MCM .879” - .953” (22.33 - 24.21 mm) 5 1/2”(140 mm) 8.20 lbs. (3.71 kg)

—————————— CABLE PULLING,
Chicago® Grip - 1628-16P and 1628-30 Series HANDLING & PREP
• Designed for large-diameter ACSR cables.
• Round jaws are shaped to provide maximum contact with the

cable, virtually eliminating cable deformation.

C 15,000 lbs. (6,803 kg) Maximum Safe Load 1656-40H

Cat. No. Min. to Max. Cable Min. to Max. Cable Jaw Length Approx. Weight
AWG or MCM Diameter inches(mm) Each
1628-16PE* 2 .316” - .325” (8.03 - 8.25 mm)
1628-16PF* 1 .354” (8.99 mm) 7 1/4” (184 mm) 17 lbs. (7.73 kg)
1628-16PG* 1/0 - 2/0 .3.98” - .447” (10.11 - 11.35 mm)
1628-16PH* 3/0 .502” (12.75 mm) 7 1/4” (184 mm) 17 lbs. (7.73 kg)
1628-16PI* 4/0 .563” (14.30 mm)
1628-16PJ* 266.8 MCM .609” (15.47 mm) 7 1/4” (184 mm) 17 lbs. (7.73 kg)
1628-16PK* 266.8 MCM - 336.4 MCM .642” - .684” (16.31 - 17.37 mm)
1628-16PL* 336.4 MCM - 397.5 MCM .720” - .743” (18.29 - 18.87 mm) 7 1/4” (184 mm) 17 lbs. (7.73 kg)
1628-16PM* 397.5 MCM - 477 MCM .772” - .814” (19.61 - 20.68 mm)
1628-16PN* 477 MCM - 556.5 MCM .846” - .883” (21.49 - 22.43 mm) 7 1/4” (184 mm) 17 lbs. (7.73 kg)

7 1/4” (184 mm) 17 lbs. (7.73 kg)

7 1/4” (184 mm) 17 lbs. (7.73 kg)

7 1/4” (184 mm) 17 lbs. (7.73 kg)

7 1/4” (184 mm) 17 lbs. (7.73 kg)

7 1/4” (184 mm) 17 lbs. (7.73 kg)

D 20,000 lbs. (9,072 kg) Maximum Safe Load 1628-30

Cat. No. Min. to Max. Cable Min. to Max. Cable Jaw Length Approx. Weight * These grips are special order only.
AWG or MCM Diameter inches(mm) Each Please allow 30 days for delivery.
10 3/4” (273 mm)
1628-30N** 477 MCM - 556.5 MCM .846” - .883” (21.49 - 22.43 mm) 10 3/4” (273 mm) 27 lbs. (12.27 kg) These are not returnable.

1628-30O** 556.5 MCM - 636 MCM .914” - .953” (23.22 - 24.21 mm) 27 lbs. (12.27 kg)

**Maximum safe string tension 12.500 lbs. to minimize cable deformation

[email protected] Call Toll Free (800) 438-6013

CABLE PULLING, HANDLING & PREP

G24 ACSR (Aluminum Conductor Steel Reinforced)

For Cable Diameter MAXIMUM SAFE LOAD

605 - 2515 MCM A B C D E

.966” - 1.88” (24.54 mm - 47.75 mm) 5,500 lbs. 8,000 lbs. 20,000 lbs. 25,000 lbs. 25,000 lbs.
(2,995 kg) (3,636 kg) (9,072 kg) (11,340 kg) with bolt on jaw

MCM Cable Diameter No. Alum. & Cat. No. Cat. No. Cat. No. Cat. No.
Size Inches (mm) Steel Strands Code Word Cat. No.
1678-20 1628-30P* 1628-40U* 1628-50P*
605 MCM .966” (24.54 mm) 26 x 7 Squab 1678-20 1628-30P* 1628-40U* 1628-50P*
1678-20 1628-30P* 1628-40U* 1628-50P*
636 MCM .977” (24.82 mm) 24 x 7 Rook 1678-20 1628-30P* 1628-40W* 1628-50P*
1678-20 1628-30P* 1628-40W* 1628-50P*
636 MCM .991” (25.15 mm) 26 x 7 Grosbeak 1678-20 1628-30P* 1628-40W* 1628-50P*
605 MCM .994” (25.25 mm) 30 x 19 Teal 1628-40X*
1678-20 1628-30P* 1628-40X* 1628-50P*
605 MCM .994” (25.25 mm) 30 x 7 Wood Duck 1678-20 1628-30R* 1628-40X* 1628-50R*
666.6 MCM 1.00” (25.40 mm) 24 x 7 Flamingo 1678-20 1628-30R* 1628-40X* 1628-50R*
1628-30R* 1628-40Y* 1628-50R*
666.6 MCM 1.014” (25.76 mm) 26 x 7 Gannet 1628-30R* 1628-40Y* 1628-50R*
636 MCM 1.019” (25.88 mm) 30 x 19 Egret 1628-30R* 1628-40Z* 1628-50R*
1628-30S* 1628-40Z* 1628-50S*
636 MCM 1.019” (25.88 mm) 30 x 7 Scoter 1628-30S* 1628-40A* 1628-50S*
1628-30S* 1628-50S*
795 MCM 1.040” (26.41 mm) 36 x 1 Coot 1678-30 1628-30S* 1628-50S*
1628-30S* 1628-50S*
715.5 MCM 1.051” (26.70 mm) 26 x 7 Starling 1678-30 1628-30S* 1628-50S*
1628-30T* 1628-50T*
795 MCM 1.063” (27.00 mm) 45 x 7 Tern 1678-30 1628-30T* 1628-50T*
715.5 MCM 1.081” (27.46 mm) 30 x 19 Redwing 1678-40 1628-30T* 1628-50T*
1628-30T* 1628-50T*
795 MCM 1.092” (27.76 mm) 54 x 7 Condor 1678-40 1628-30T* 1628-50T*
795 MCM 1.092” (27.74 mm) 24 x 7 Cuckoo 1678-40 1628-30T* 1628-50T*
1628-30U* 1628-50U*
CABLE PULLING, 795 MCM 1.107” (28.14 mm) 26 x 7 Drake 1678-40 1628-30U* 1628-50U*
HANDLING & PREP 1628-30U* 1628-50U*
900 MCM 1.131” (28.73 mm) 45 x 7 Ruddy 1678-40 1628-50W*
795 MCM 1.140” (28.96 mm) 30 x 19 Mallard 1678-40 1628-50W*
1628-50W*
900 MCM 1.162” (29.51 mm) 54 x 7 Canary 1678-50 1628-50X*
954 MCM 1.165” (29.59 mm) 20 x 7 Corncrake 1678-50 1628-50X*
1628-50X*
954 MCM 1.165” (29.59 mm) 45 x 7 Rail 1678-50 1628-50X*
1628-50Y*
954 MCM 1.175” (29.85 mm) 48 x 7 Towhee 1678-50 1628-50Y*
1628-50Z*
954 MCM 1.196” (30.38 mm) 54 x 7 Cardinal 1678-50 1628-50Z*
1628-50A*
954 MCM 1.196” (30.38 mm) 24 x 7 Redbird 1678-50 1628-50B*
1033.5 MCM 1.212” (30.81 mm) 45 x 7 Ortolan 1628-50C*
1628-50D*
1033.5 MCM 1.245” (31.65 mm) 54 x 7 Curlew 1628-50D*
1113 MCM 1.258” (31.95 mm) 45 x 7 Bluejay 1628-50E*
1628-50F*
1113 MCM 1.292” (32.84 mm) 54 x 19 Finch

1192.5 MCM 1.302” (33.07 mm) 45 x 7 Bunting
1272 MCM 1.317” (33.45 mm) 36 x 1 Skylark

1192.5 MCM 1.337” (33.99 mm) 54 x 19 Grackle
1272 MCM 1.345” (34.16 mm) 45 x 7 Bittern

1272 MCM 1.381” (35.10 mm) 54 x 19 Pheasant

1351.5 MCM 1.386” (35.20 mm) 45 x 7 Dipper

1351.5 MCM 1.424” (36.17 mm) 54 x 19 Martin

1431 MCM 1.427” (36.25 mm) 45 x 7 Bobolink
1431 MCM 1.465” (37.21 mm) 54 x 19 Plover

1590 MCM 1.504” (38.15 mm) 45 x 7 Lapwing
1950 MCM 1.544” (39.24 mm) 54 x 19 Falcon

1780 MCM 1.602” (40.69 mm) 84 x 19 Chukar

2034.5 MCM 1.681” (42.70 mm) 72 x 7 Mockingbird * Special order
only.
2167 MCM 1.735” (44.12 mm) 72 x 7 Kiwi Please allow 30
days for delivery.
2156 MCM 1.762” (44.75 mm) 84 x 19 Bluebird These are not
2312 MCM 1.802” (45.77 mm) 76 x 19 Thrasher returnable.

2515 MCM 1.88” (47.75 mm) 76 x 19 Jorea

www.americansafety.com 24 hour Fax (704) 481-0450

CABLE PULLING, HANDLING & PREP

G25ACSR (Aluminum Conductor Steel Reinforced)

Chicago® Grips Approx. Weight Each

Chicago® Grip - 1678 Series
• Round jaws are shaped to provide maximum contact with the
circumference of cable, less likely to cause cable deformation.
• Supplied with spring and locking loop handles, allowing jaws to
be held in open position for easier placement on cable.

A 5,500 lbs. (2,495 kg) Maximum Safe Load
Cat. No. Min. to Max. Cable MCM Min. to Max. Cable Diameter inches(mm) Jaw Length
1678-30 715.5 MCM - 795 MCM 1.040” - 1.063” (26.42 - 27.00 mm) 5 11/16” (144 mm) 8.20 lbs. (3.71 kg)

1678-30 795 MCM - 900 MCM 1.081” - 1.140” (27.48 - 28.96 mm) 5 11/16” (144 mm) 8.20 lbs. (3.71 kg)

1678-30 900 MCM - 954 MCM 1.162” - 1.196” (29.51 - 30.38 mm) 5 11/16” (144 mm) 8.20 lbs. (3.71 kg)

B 8,000 lbs. (3,629 kg) Maximum Safe Load Approx. Weight Each
Cat. No. Min. to Max. Cable MCM Min. to Max. Cable Diameter inches(mm) Jaw Length
1678-20 605 MCM - 666.6 MCM .966” - 1.019” (24.54 - 25.88 mm) 5 11/16” (144 mm) 8.30 lbs. (3.71 kg)

—————————— 1628-40

Chicago® Grip - 1628 Series 1678-30
• Round jaws are shaped to provide maximum contact with the
cable, virtually eliminating cable deformation. * These grips are special order only.
Please allow 30 days for delivery.
C 20,000 lbs. (9,072 kg) Maximum Safe Load These are not returnable.
Cat. No. Min. to Max. Cable MCM Min. to Max. Cable Diameter inches(mm) Jaw Length Approx. Weight Each
27 lbs. (12.27 kg)
1628-30P* 605 MCM - 666.6 MCM .966” - 1.014” (24.54 - 25.76 mm) 10 3/4” (273 mm) 27 lbs. (12.27 kg)
27 lbs. (12.27 kg)
1628-30R* 636 MCM - 795 MCM 1.019” - 1.063” (25.88 - 27.00 mm) 10 3/4” (273 mm) 27 lbs. (12.27 kg) CABLE PULLING,
27 lbs. (12.27 kg) HANDLING & PREP
1628-30S* 715.5 MCM - 900 MCM 1.081” - 1.140” (27.46 - 28.96 mm) 10 3/4” (273 mm)

1628-30T* 900 MCM - 954 MCM 1.162” - 1.196” (29.51 - 30.38 mm) 10 3/4” (273 mm)

1628-30U* 1033.5 MCM - 1113 MCM 1.212” - 1.258” (30.75 - 31.95 mm) 10 3/4” (273 mm)

D 25,000 lbs. (11,340 kg) Maximum Safe Load
Cat. No. Min. to Max. Cable MCM Min. to Max. Cable Diameter inches(mm) Jaw Length Approx. Weight Each

1628-40U* 1033.5 MCM - 1113 MCM 1.212” - 1.258” (30.75 - 31.95 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1628-40W* 1113 MCM - 1272 MCM 1.292” - 1.317” (32.82 - 33.45 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1628-40X* 1192.5 MCM - 1351.5 MCM 1.337” - 1.386” (33.96 - 35.20 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1628-40Y* 1351.5 MCM - 1431 MCM 1.424” - 1.427” (36.17 - 36.25 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1628-40Z* 1431 MCM - 1590 MCM 1.465” - 1.504” (37.21 - 38.20 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1628-40A* 1590 MCM 1.544” (39.22 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

E 25,000 lbs. (11,340 kg) Maximum Safe Load with bolt on jaw
Cat. No. Min. to Max. Cable MCM Min. to Max. Cable Diameter inches(mm) Jaw Length Approx. Weight Each

1628-50P* 605 MCM - 666.6 MCM .966” - 1.014” (24.54 - 25.76 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1628-50R* 636 MCM - 795 MCM 1.019” - 1.063” (25.88 - 27.00 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1628-50S* 715.5 MCM - 900 MCM 1.081” - 1.140” (27.46 - 28.96 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1628-50T* 900 MCM - 954 MCM 1.162” - 1.196” (29.51 - 30.38 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1628-50U* 1033.5 MCM - 1113 MCM 1.212” - 1.258” (30.75 - 31.95 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1628-50W* 1113 MCM - 1272 MCM 1.292” - 1.317” (32.82 - 33.45 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1628-50X* 1192.5 MCM - 1351.5 MCM 1.337” - 1.386” (33.96 - 35.20 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1628-50Y* 1351.5 MCM - 1431 MCM 1.424” - 1.427” (36.17 - 36.25 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1628-50Z* 1431 MCM - 1590 MCM 1.465” - 1.504” (37.21 - 38.20 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1628-50A* 1590 MCM 1.544” (39.22 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1628-50B* 1780 MCM 1.602” (40.69 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1628-50C* 2034.5 MCM 1.681” (42.70 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1628-50D* 2156 MCM - 2167 MCM 1.730” - 1.762” (44.12 - 44.75 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1629-50E* 2312 MCM 1.802” (45.77 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1629-50F* 2515 MCM 1.88” (47.75 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

[email protected] Call Toll Free (800) 438-6013

CABLE PULLING, HANDLING & PREP

G26 AAC (All Aluminum Conductor)

For Cable Diameter A MAXIMUM SAFE LOAD CD

4 AWG - 650 MCM 4,500 lbs. B 15,000 lbs. 20,000 lbs.
(2,041 kg) (6,803 kg) (9,072 kg)
.231” - .928” (5.78 mm - 23.57 mm) Cat. No. 8,000 lbs.
(3,629 kg)
AWG or MCM Diameter No. Alum. & 1656-20, 1656-20H & S1656-20H
Cable Size Inches (mm) Steel Strands Code 1656-20, 1656-20H & S1656-20H Cat. No. Cat. No. Cat. No.
Word 165-20, 1656-20H, S1656-20H,
4 .231” (5.87 mm) 7 1656-30, 1656-30H & S1656-30H 1628-16PF*
2 .292” (7.42 mm) 7 Rose 165-20, 1656-20H, S1656-20H,
1 .328” (8.33 mm) 7 Iris 1656-30, 1656-30H & S1656-30H
Pansy 1656-30, 1656-30H & S1656-30H
1/0 .369” (9.36 mm) 7 1656-30, 1656-30H & S1656-30H 1628-16PF*
Poppy 1656-30, 1656-30H & S1656-30H
CABLE PULLING, 2/0 .414” (10.51 mm) 7 1656-40, 1656-40H & S1656-40H 1628-16PG* 1628-30N*
HANDLING & PREP 3/0 .465” (11.81 mm) 7 Aster “S” is for spring. 1656-40, 1656-40H & S1656-40H 1628-16PH* 1628-30N*
4/0 .522” (13.25 mm) 7 Phlox “H” is for hot latch. 1656-40, 1656-40H & S1656-40H 1628-16PI* 1628-30O*
250 MCM .567” (14.40 mm) 7 Oxlip * Special order only. 1656-40, 1656-40H & S1656-40H 1628-16PI* 1628-30O*
250 MCM .574” (14.58 mm) 19 Sneezewort Please allow 30 days for 1656-40, 1656-40H & S1656-40H 1628-16PI* 1628-30O*
266.8 MCM .586” (14.88 mm) 7 Valerian delivery. 1656-40, 1656-40H & S1656-40H 1628-16PJ*
266.8 MCM .593” (15.05 mm) 19 Daisy These are not returnable. 1656-40, 1656-40H & S1656-40H 1628-16PJ*
300 MCM .628” (15.95 mm) 19 Laurel 1656-40, 1656-40H & S1656-40H 1628-16PJ*
266.4 MCM .665” (16.90 mm) 19 Peony 1656-50, 1656-50H & S1656-50H 1628-16PK*
350 MCM .678” (17.22 mm) 19 Tulip 1656-50, 1656-50H & S1656-50H 1628-16PK*
397.5 MCM .724” (18.38 mm) 19 Daffodil 1656-50, 1656-50H & S1656-50H 1628-16PL*
450 MCM .769” (19.53 mm) 19 Canna 1656-50, 1656-50H & S1656-50H 1628-16PM*
477 MCM .792” (20.12 mm) 19 Goldentuft 1656-50, 1656-50H & S1656-50H 1628-16PM*
477 MCM .794” (20.18 mm) 37 Cosmos 1656-50, 1656-50H & S1656-50H 1628-16PM*
500 MCM .811” (20.60 mm) 19 Syringa 1656-50, 1656-50H & S1656-50H 1628-16PM*
500 MCM .813” (20.65 mm) 37 Zinnia 1656-60, 1656-60H & S1656-60H 1628-16PM*
556.5 MCM .856” (21.73 mm) 19 Hyacinth 1656-60, 1656-60H & S1656-60H 1628-16PN*
556.5 MCM .858” (21.80 mm) 37 Dahlia 1656-60, 1656-60H & S1656-60H 1628-16PN*
600 MCM .891” (22.63 mm) 37 Mistletoe
636 MCM .918” (23.31 mm) 37 Meadowsweet
650 MCM .928” (23.57 mm) 37 Orchid
Heuchera

Hot-line Latch

The hot-line latch is designed for placing a grip on cable with a hotstick.
The three notches in the hot-line latch adjust the balance of the grip to better
match the direction of the cable sag.

• When stick is removed, latch closes automatically to guard
against grip accidentally disengaging from wire.

• Standard hot-line grips are not supplied with springs or
lock-open features.

www.americansafety.com 24 hour Fax (704) 481-0450

CABLE PULLING, HANDLING & PREP

G27AAC (All Aluminum Conductor)

Chicago® Grips

Chicago® Grip - 1678 Series

• Round, smooth inside jaw contour on this series of grips is 1656-30
recommended for bare AAC.

• Smooth jaws grip with maximum contact and are less likely to
cause cable deformation.

A 4,500 lbs. (2,041 kg) Maximum Safe Load

Cat. No. Hot Latch Hot Latch/Spring Min. to Max. Min. to Max. Cable Jaw Length Approx. Weight
Each
Model No. Model No. Cable AWG Diameter inches(mm)

1656-20 1656-20H S1656-20H 4 - 1/0 .231” - .369” (5.87 - 9.37 mm) 4” (102 mm) 3 lbs. (1.36 kg)

1656-30 156-30H S1656-30H 1 - 4/0 .328” - .522” (8.33 - 13.26 mm) 4 3/4” (121 mm) 3.75 lbs. (1.70 kg)

B 8,000 lbs. (3,629 kg) Maximum Safe Load

Cat. No. Hot Latch Hot Latch/Spring Min. to Max. Min. to Max. Cable Jaw Length Approx. Weight
Diameter inches(mm) Each
Model No. Model No. Cable AWG 5 1/2”(140 mm)
5 1/2”(140 mm) 8.30 lbs. (3.76 kg)
1656-40 1656-40H S1656-40H 250 MCM - 397.5 MCM .567” - .724” (14.40 - 18.39 mm) 5 1/2”(140 mm)
8.30 lbs. (3.76 kg)
1656-50 1656-50H S1656-50H 450 MCM - 556.5 MCM .769” - .858” (19.53 - 21.79 mm)
8.20 lbs. (3.71 kg)
1656-60 1656-60H S1656-60H 600 MCM - 650 MCM .891” - .928” (22.63 - 23.57 mm)

—————————— CABLE PULLING,
Chicago® Grip - 1628-16P and 1628-30 Series HANDLING & PREP

• Designed for large-diameter AAC cables. 1656-40H
• Round jaws are shaped to provide maximum contact with the 1628-30

cable, virtually eliminating cable deformation.

C 15,000 lbs. (6,803 kg) Maximum Safe Load

Cat. No. Min. to Max. Cable Min. to Max. Cable Jaw Length Approx. Weight
AWG or MCM Diameter inches(mm) Each
1628-16PE* 1 .328” (8.33 mm) 7 1/4” (184 mm) 17 lbs. (7.73 kg)
1628-16PF* 1/0 .369” (9.37 mm) 7 1/4” (184 mm) 17 lbs. (7.73 kg)
1628-16PG* 2/0 .414” (10.52 mm) 7 1/4” (184 mm) 17 lbs. (7.73 kg)
1628-16PH* 3/0 .465” (11.81 mm) 7 1/4” (184 mm) 17 lbs. (7.73 kg)
1628-16PI* 250 MCM .567” - .574” (14.40 - 14.58 mm) 7 1/4” (184 mm) 17 lbs. (7.73 kg)
1628-16PJ* 266.8 MCM - 300 MCM .586” - .628” (14.88 - 15.95 mm) 7 1/4” (184 mm) 17 lbs. (7.73 kg)
1628-16PK* 336.4 MCM - 350 MCM .665” - .678” (16.89 - 17.22 mm) 7 1/4” (184 mm) 17 lbs. (7.73 kg)
1628-16PL* 397.5 MCM .724” (18.39 mm) 7 1/4” (184 mm) 17 lbs. (7.73 kg)
1628-16PM* 450 MCM - 500 MCM .769” - .813” (19.53 - 20.65 mm) 7 1/4” (184 mm) 17 lbs. (7.73 kg)
1628-16PN* 556.5 MCM .856” - .858” (21.72 - 21.79 mm) 7 1/4” (184 mm) 17 lbs. (7.73 kg)

D 20,000 lbs. (9,072 kg) Maximum Safe Load

Cat. No. Min. to Max. Cable Min. to Max. Cable Jaw Length Approx. Weight * These grips are special order only.
Each Please allow 30 days for delivery.
AWG or MCM Diameter inches(mm) 10 3/4” (273 mm)
10 3/4” (273 mm) 27 lbs. (12.27 kg) These are not returnable.
1628-30N** 55.65 MCM .856” - .858” (21.74 - 21.79 mm)
27 lbs. (12.27 kg)
1628-30O** 600 MCM - 650 MCM .891” - .928” (22.63 - 23.57 mm)

**Maximum safe string tension 12.500 lbs. to minimize cable deformation

[email protected] Call Toll Free (800) 438-6013

CABLE PULLING, HANDLING & PREP

G28 AAC (All Aluminum Conductor)

For Cable Diameter MAXIMUM SAFE LOAD

700 - 2500 MCM A B C D E

.963” - 1.823” (24.46 mm - 46.30 mm) 5,500 lbs. 8,000 lbs. 20,000 lbs. 25,000 lbs. 25,000 lbs.
(2,268 kg) (3,629 kg) (9,072 kg) (11,340 kg) with bolt on jaw
Cat. No.
MCM Cable Diameter No. Alum. & Code Word Cat. No. Cat. No. Cat. No. Cat. No.
Size Inches (mm) Steel Strands Verbena 1678-30 1678-20 1628-30P* 1628-50P*
Flag 1678-30 1678-20 1628-30P* 1628-50P*
700 MCM .963” (24.46) 37 Violet 1678-30 1678-20 1628-30* 1628-50P*
Nastrutium 1678-30 1678-20 1628-30P* 1628-50P*
700 MCM .964” (24.49) 61 Petunia 1678-30 1678-20 1628-30P* 1628-50P*
Cattail 1678-30 1678-20 1628-30P* 1628-50P*
715.5 MCM .974” (24.73) 37 Arbutus 1678-40 1628-50R*
Lilac 1678-40 1628-50R*
715.5 MCM .975” (24.76) 61 Fuchsia 1678-40 1628-50R*
Heliotrope 1678-50 1628-50R*
750 MCM .997” (25.32) 37 Anemone 1678-50 1628-50R*
Crocus 1678-50 1628-50R*
750 MCM .998” (25.35) 61 Cockscomb 1678-50 1628-50S*
Magnolia 1628-50S*
795 MCM 1.026” (26.07) 37 Goldenrod 1628-30R* 1628-50S*
Camellia 1628-30R* 1628-50T
795 MCM 1.028” (26.11) 61 Hawkweed 1628-30R* 1628-50T*
Bluebell 1628-30R* 1628-50T*
800 MCM 1.029” (26.14) 37 Larkspur 1628-30R* 1628-50T*
Marigold 1628-30R* 1628-50U*
800 MCM 1.031” (26.19) 61 Hawthorn 1628-30S* 1628-50U*
Narcissus 1628-30S* 1628-50W*
874.5 MCM 1.076” (27.37) 37 Columbine 1628-30S* 1628-50X*
Carnation 1628-30T* 1628-50X*
874.5 MCM 1.077” (27.36) 61 Gladiolus 1628-30T* 1628-50Y*
Coreopsis 1628-30T* 1628-50Z*
900 MCM 1.092” (27.74) 37 Jessamine 1628-30T* 1628-50A*
Cowslip 1628-30U* 1628-50B*
954 MCM 1.124” (28.55) 37 Sagebrush 1628-30U* 1628-50D*
Lupine 1628-50E*
954 MCM 1.126” (28.60) 61 * Special order
only.
CABLE PULLING, 1000 MCM 1.152” (29.26) 61 Please allow 30
HANDLING & PREP days for delivery.
1000 MCM 1.152” (29.26) 37

1033.5 MCM 1.170” (29.71) 37

1033.5 MCM 1.172” (29.76) 61

1113 MCM 1.216” (30.88) 61 1628-40U*
1628-40U*
1192.5 MCM 1.258” (31.96) 61 1628-40W*
1628-40X*
1272 MCM 1.297” (32.94) 61 1628-40X*
1628-40Y*
1351.5 MCM 1.339” (34.02) 61 1628-40Z*
1628-40A*
1431 MCM 1.379” (35.02) 61

1510.5 MCM 1.417” (35.98) 61

1590 MCM 1.454” (36.93) 61

1750 MCM 1.524” (38.72) 61

2000 MCM 1.630” (41.41) 91

2250 MCM 1.729” (43.92) 91 These are not
returnable.
2500 MCM 1.823” (46.30) 91

1678-30 Chicago® Grip

Chicago® Grip - 1678 Series - 5,500 lbs (2,495 kg) Maximum
Safe Load

• Round jaws shaped to provide maximum contact with

A circumference of cable, less likely to cause cable deformation.
• Supplied with spring and locking loop handles, allowing jaws to
be held in open position for easier placement on cable.

Cat. No. Min. to Max. Cable MCM Min. to Max. Cable Diameter inches (mm) Jaw Length Approx. Weight Each
1678-30 8.20 lbs. (3.71 kg)
1678-40 795 MCM - 874.5 MCM 1.026” - 1.077” (26.06 - 27.36) 5 11/16” (144mm) 8.20 lbs. (3.71 kg)
1678-50 7.90 lbs. (3.58 kg)
900 MCM - 954 MCM 1.092” 1.126” (27.74 - 28.60) 511/16” (144mm)
5 11/16” (14mm)
1000 MCM - 1033.5 MCM 1.152” - 1.172” (29.26 - 29.77)

www.americansafety.com 24 hour Fax (704) 481-0450

CABLE PULLING, HANDLING & PREP

G29AAC (All Aluminum Conductor)

Chicago® Grips

B 8,000 lbs. (3,629 kg) Maximum Safe Load

Cat. No. Min. to Max. Min. to Max. Cable Jaw Length Approx. Weight
Cable MCM Diameter inches(mm) 5 11/16” (144 mm) Each

1678-20 700 MCM - 750 MCM .963” - .998” (24.46 - 25.35 mm) 8.30 lbs. (3.71 kg)

——————————

Chicago® Grip - 1628 Series

• Round jaws are shaped to provide maximum contact with the 1678-20
cable, virtually eliminating cable deformation.
* These grips are special order only.
C 20,000 lbs. (9,072 kg) Maximum Safe Load Please allow 30 days for delivery.
These are not returnable
Cat. No. Min. to Max. Min. to Max. Cable Jaw Length Approx. Weight
Cable MCM Diameter inches(mm) Each
27 lbs. (12.27 kg)
1628-30P* 700 MCM - 750 MCM .963” - .998” (24.46 - 25.35 mm) 10 3/4” (273 mm) 27 lbs. (12.27 kg)
27 lbs. (12.27 kg)
1628-30R* 795 MCM - 874.5 MCM 1.026” - 1.077” (26.06 - 27.36 mm) 10 3/4” (273 mm) 27 lbs. (12.27 kg)
27 lbs. (12.27 kg)
1628-30S* 900 MCM - 954 MCM 1.092” - 1.126” (17.74 - 28.60 mm) 10 3/4” (273 mm)

1628-30T* 1000 MCM - 1033.5 MCM 1.152” - 1.172” (29.26 - 29.77 mm) 10 3/4” (273 mm)

1628-30U* 1113 MCM - 1192.5 MCM 1.216” - 1.258” (30.89 - 31.95 mm) 10 3/4” (273 mm)

D 25,000 lbs. (11,340 kg) Maximum Safe Load CABLE PULLING,
HANDLING & PREP
Cat. No. Min. to Max. Min. to Max. Cable Jaw Length Approx. Weight
Cable MCM Diameter inches(mm) Each
34 lbs. (15.45 kg) 1628-30
34 lbs. (15.45 kg)
1628-40U* 1113 MCM - 1192.5 MCM 1.216” - 1.258” (30.89 - 31.95 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)
34 lbs. (15.45 kg)
1628-40W* 1272 MCM 1.297” (32.94 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)
34 lbs. (15.45 kg)
1628-40X* 1351.5 MCM - 1435 MCM 1.339” - 1.379” (34.01 -35.03 mm) 10 3/4” (273 mm)

1628-40Y* 1510.5 MCM 1.417” (35.99 mm) 10 3/4” (273 mm)

1628-40Z* 1590 MCM 1.524” (36.93 mm) 10 3/4” (273 mm)

1628-40A* 1750 MCM 1.524” (38.71 mm) 10 3/4” (273 mm)

E 25,000 lbs. (11,340 kg) Maximum Safe Load with bolt on jaw

Cat. No. Min. to Max. Min. to Max. Cable Jaw Length Approx. Weight
Cable MCM Diameter inches(mm) Each

1628-50P* 700 MCM - 750 MCM .963” - .998” (24.46 - 25.35 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1628-50R* 795 MCM - 874.5 MCM 1.026” - 1.077” (26.06 - 27.36 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1628-50S* 900 MCM - 954 MCM 1.092” - 1.126” (27.74 - 28.60 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1628-50T* 1000 MCM - 1033.5 MCM 1.152” - 1.172” (29.26 - 29.77 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1628-50U* 1113 MCM - 1192.5 MCM 1.216” - 1.258” (30.89 - 31.95 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1628-50W* 1272 MCM 1.297” (32.94 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg) Removable bolt on
floating jaw, secured by a
1628-50X* 1351.5 MCM - 1431 MCM 1.339” - 1.379” (34.01 - 35.03 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg) slotted nut and cotter pin.
Jaw provides increased
1628-50Y* 1510.5 MCM 1.417” (35.99 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg) cable coverage.

1628-50Z* 1590 MCM 1.454” (36.93 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg) Note: Jaw must be removed to
insert cable.
1628-50A* 1750 MCM 1.524” (38.71 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1628-50B* 2000 MCM 1.630” (41.40 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1628-50D* 2250 MCM 1.729” (43.92 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

1628-50E* 2500 MCM 1.823” (46.30 mm) 10 3/4” (273 mm) 34 lbs. (15.45 kg)

[email protected] Call Toll Free (800) 438-6013

CABLE PULLING, HANDLING & PREP

G30 Copper

Chicago® Grips

Bare Stranded Chicago® Grips - 1656 Series

• Round, smooth inside jaw contour on this series of grips is ideal
for stranded-copper cables.

• Smooth jaws grip with maximum contact and are less likely to
cause cable deformation.

Cat. No. Hot Latch Hot Latch/Spring Min. to Max. Cable Jaw Length Approx. Weight
Model No. Model No. Diameter inches(mm) Each

4,500 lbs. (2,041 kg) Maximum Safe Load

1656-20 1656-20H S1656-20H .20” - .40” (5.08 - 10.16 mm) 4” (102 mm) 3 lbs. (1.36 kg)
.31” - .53” (7.87 - 13.46 mm) 4 3/4” (121 mm) 3.75 lbs. (1.70 kg)
1656-30 1656-30H S1656-30H

8,000 lbs. (3,629 kg) Maximum Safe Load

1656-40 NA NA .31” - .62” (7.87 - 15.75 mm) 7 1/4” (184 mm) 15.30 lbs. (7.00 kg)
.50” - .75” (12.70 - 19.05 mm) 7 1/4” (184 mm) 16.30 lbs. (7.40 kg)
1656-50 NA NA .75” - 1.00” (19.05 - 25.40 mm) 7 1/4” (184 mm) 15.70 lbs. (7.10 kg)

1656-60 NA NA

CABLE PULLING, ——————————
HANDLING & PREP Weatherproof Stranded and Solid Chicago® Grips - 1611
Series

• Round, smooth inside jaw contour for weatherproof coated wire.
• Notches in jaw provide firm grip on insulation.

1656-30 Cat. No. Min. to Max. Cable Jaw Length Approx. Weight
1611-30 Diameter inches(mm) Each

1659-30 4,500 lbs. (2,041 kg) Maximum Safe Load 3 lbs. (1.36 kg)
3.75 lbs. (1.70 kg)
www.americansafety.com 1611-20 .20” - .40” (5.08 - 10.16 mm) 4” (102 mm)
7.75 lbs. (3.52 kg)
1611-30 .31” - .53” (7.87 - 13.46 mm) 4 3/4” (121 mm) 7.75 lbs. (3.52 kg)

8,000 lbs. (3,629 kg) Maximum Safe Load

1611-40 .53” - .72” (13.46 - 18.80 mm) 5 11/16” (144 mm)

1611-50 .74” - .86” (18.80 - 21.84 mm) 5 11/16” (144 mm)

Note: Due to various types of weatherproof coatings available, selection of proper grips is deter-
mined by outside diameter of cable.

——————————
PVC-Covered Chicago® Grips - 1659 Series

• Specially machined serpentine jaws allow insulated conductor to
be inserted through jaws.

• Eliminates necessity of stripping insulation from conductor.
• Round inside-jaw contour.

Cat. No. Min. to Max. Cable Jaw Length Approx. Weight
Diameter inches(mm) Each
4 3/16” (106 mm)
4,500 lbs. (2,041 kg) Maximum Safe Load 4 3/4” (121 mm) 3 lbs. (1.36 kg)
1659-20 .20” - .42” (5.08 - 10.67 mm) 3.75 lbs. (1.70 kg)
1659-30 .31” - .50” (7.87 - 12.70 mm) 5 11/16” (144 mm)
8,000 lbs. (3,629 kg) Maximum Safe Load 5 11/16” (144 mm) 7.75 lbs. (3.52 kg)
1659-40 .49” - .79” (12.45 - 20.07 mm) 7.75 lbs. (3.52 kg)
1659-50 .79” - 1.01” (20.07 - 25.56 mm)

24 hour Fax (704) 481-0450

CABLE PULLING, HANDLING & PREP

G31Steel Strand

Chicago® Grips

Aircraft Cable, EHS (Extra-High-Strength, Messenger, and
Guy Strand Chicago® Grips - 1613, 1628, 1684 and 1692
Series

• A family of grips designed for cable sizes from .12” (3.10 mm) to
1” (25.4 mm).

• Double V grooves provide four-point contact, reducing chance
of slipping and providing proper alignment of wire and cable.
(1684-5F is a Single V with file insert.)

Cat. No. Hot Latch Hot Latch/Spring Min. to Max. Cable Jaw Length Approx. Weight
Model No. Model No. Diameter inches(mm) Each

4,500 lbs. (2,041 kg) Maximum Safe Load .12” - .37” (3.05 - 9.40 mm)

1613-40 1613-40H S1613-40H .16” - .550” (4.06 - 13.97 mm) 4 3/16” (106 mm) 3 lbs. (1.36 kg)
.218” - .550” (5.54 - 13.97 mm)
8,000 lbs. (3,629 kg) Maximum Safe Load .218” - .550” (5.54 - 13.97 mm)

1684-5F (includes replacement file) NA NA .218” - .550” (5.54 - 13.97 mm) 5” (127 mm) 6.25 lbs. (2.84 kg)
5” (127 mm) 6.25 lbs. (2.84 kg)
1684-5 1684-5H S1684-5H .31” - .62” (7.87 - 15.75 mm) 5” (127 mm) 6.40 lbs. (2.84 kg)
.50” - .75” (12.70 - 19.05 mm)
1692-5 (large clamping force than 1684-5) NA NA .75” - 1.00” (19.05 - 25.40 mm)

8,000 lbs. (3,629 kg) Maximum Safe Load - EHS Specific

1684-74 (includes curved jaw) NA S1684-74H 5” (127 mm) 6.30 lbs. (2.85 kg)

15,000 lbs. (6,803 kg) Maximum Safe Load

1628-16 NA NA 7 1/4” (184 mm) 15.30 lbs. (7.00 kg)
7 1/4” (184 mm) 16.30 lbs. (7.40 kg)
1628-17 NA NA 7 1/4” (184 mm) 15.70 lbs. (7.10 kg) CABLE PULLING,
HANDLING & PREP
1628-18 NA NA

1613-40

[email protected] 1684-74

Call Toll Free (800) 438-6013



CABLE PULLING, HANDLING & PREP

G33Little Mule Wire Grips

Little Mule Wire Grips Get the Job Done - Efficiently and
Economically!

Easy to Use A.

• Versatility - All models are rated for a variety of wire sizes Modified
and types, so fewer grip changes are required. Bulldog Jaw

• No Lock-Ups - Grips open easily and release instantly to
quickly insert or remove wire

• Large Handle Eye Opening - Accepts standard hooks and
easily attaches to tackle blocks.

• Choice of Design - Spring loaded or non-spring loaded
models available

Rugged and Portable B.

• Forged Steel Construction - Durable yet lightweight Parallel Jaw
• Yellow Chromate Finish - Protects components from rust
CABLE PULLING,
and corrosion HANDLING & PREP

Hot Line Models

• Spring Loaded Gate - Standard on all hot line models.
Lineman can use a holding stick to open the gate and place
the grip on the wire. When released, the gate closes over
the wire and prevents the grip from falling off the wire.

• Locking Mechanism - Notched handle on spring loaded
models locks grip in open position for placement on or
removal from wire, then releases instantly.

Jaw Options

• Replacement Jaw - Machined with large, aggressive teeth.
Available on 5,000 and 10,000 models - suited for applications
requiring exclusive use on EHS cable or guy strand.

Specifications: C. Hot Line
Standard & Hotline Models • 1,000-20,000 lbs. Safety Gate

Cat. No. Type Capacity Net. Weight Min. Wire Size Max. Wire Size Handle Eye Opening
(lbs) (lbs) (in) (gague) (in) (gague) (in)
A. LMG1000* Standard Grip
A. LMG2000* Modified Bulldog Jaw 1000 1/2 .04 18 AWG .394 1/0 AWG .625 dia.
B. LMG4500 Spring Loaded 2000 1 .109 8 AWG .594 4/0 AWG 1 x 1 1/2
B. LMG4600 5,000 3 1/4 .18 6 AWG .60 4/0 AWG 1 1/4 x 1 3/4
B. LMG4800 Hot Line Grip 10,000 4 1/2 .30 1 AWG .80 450 MCM 1 1/4 x 1 3/4
B. LMG4700 Spring Loaded 12,000 8 .70 397 MCM 1.25 1130 MCM 1 1/4 x 1 3/4
C. LMG4501 Notched Handle 20,000 21 .70 397 MCM 1.25 1130 MCM 2 1/2 x 3 1/2
C. LMG4601 Hot Line Grip 5,000 3 1/4 .18 6 AWG .60 4/0 AWG 1 1/4 x 1 3/4
C. LMG4801 No Spring 10,000 4 1/4 .30 1 AWG .80 450 MCM 1 1/4 x 1 3/4
C. LMG4701 Non-Notched Handle 12,000 8 .70 397 MCM 1.25 1130 MCM 1 1/4 x 1 3/4
C. LMG4502 20,000 21 .70 397 MCM 1.25 1130 MCM 2 1/2 x 3 1/2
C. LMG4602 5,000 3 1/4 .18 6 AWG .60 4/0 AWG 1 1/4 x 1 3/4
C. LMG4802 10,000 4 1/2 .30 1 AWG .80 450 MCM 1 1/4 x 1 3/4
C. LMG4702 12,000 8 .70 397 MCM 1.25 1130 MCM 1 1/4 x 1 3/4
20,000 21 .70 397 MCM 1.25 1130 MCM 2 1/2 x 3 1/2

*NOTE: 1000 and 2000 lb. Models have bulldog-type jaw. All other
models have parallel jaw.
Warning: Overloading and improper use can result in injury.

[email protected] Call Toll Free (800) 438-6013

G34 CABLE PULLING, HANDLING & PREP

Klein® Cable Grip Accessories

A. Grip-Cleaning Brush Set

• Set of four wire-bristle brushes designed for cleaning Klein wire
and cable-pulling grips.

• Brushes have stiff wire bristles.
• Available in round and square shapes and two lengths for

efficient cleaning of different jaw configurations.
• Semi-flexible steel shafts set the comfortable wooden handles

provide the necessary reach into grip jaws.
• Set Ship. Wt. 1 lb.

BRUSH DESCRIPTIONS:

Description Bristle Diameter and Length Overall Length

round-bristle 3/8” x 3” 12”

A. square-bristle 3/8” x 3” 12”
round-bristle 1 9/16” x 5” 14”

square-bristle 1 9/16” x 5” 14”

Cat. No. 25450

——————————

CABLE PULLING, B. Howe Wire Tool
HANDLING & PREP
• Strap is made of tough Klein-Kord®

• Swivel hook is forged steel with large opening.

• Shank of hook is lengthened to reach under insulator.

• Other end has cam-lock to hold the load at any distance.

• All metal parts are galvanized.

B. • Max. safe parts are galvanized.

• Length: 1” x 7’

• Ship. Wt. 1.95 lbs.

Cat. No. 1702-20N

——————————

C.

C. Klein Tools Grip Selection Guide - a handy slide chart to help
navigate through the selection process. (Ship. Wt. .1 lb.)

Cat. No. 98404

www.americansafety.com 24 hour Fax (704) 481-0450

CABLE PULLING, HANDLING & PREP G35

Flexcor® Wire Mesh Grips

Flexcor® Wire Mesh Grips - Standard closed mesh support grips D.
are designed for loads up to 600 lbs. and vertical runs of no more
than 100 ft. They are available in a variety of eye styles and cable
ranges for supporting electrical and fiber optic cable, metal rods,
and tubing. Closed mesh support grips are used when the end
of the cable is accessible. Support grips are woven of corrosion-
resistant thinned-bronze wire.

Cat No.* Cable Diameter Bale Length Mesh Length Approximate Break
Range Strength**

D. Standard-Duty, Closed Mesh, Single Eye Grips

FC050U 0.500”-0.610” 7” 11” 770 lbs.
FC062U
FC075U 0.620”-0.740” 8” 11” 960 lbs.
0.750”-0.990”
FC100U 1.000”-1.240” 8” 14” 1300 lbs.
9”
FC125U 1.250”-1.490” 10” 15” 1680 lbs
16” 1680 lbs.
FC150U 1.500”-1.740” 12” 18”
FC175U 1680 lbs.
1.750”-1.990” 14” 20” 2640 lbs.
FC200U 2.000”-2.490” E.
FC250U 16” 22” 3760 lbs F.
2.500”-2.990” 18” G.
FC300U 3.000”-3.490” 24” 3760 lbs.
21” 26”
FC350U 3.500”-3.990” 24” 5040 lbs.
28” 5040 lbs.

E. Standard Duty, Closed Mesh, Double Eye Grips

FC050UU 0.500”-0.610” 4” 11” 770 lbs. CABLE PULLING,
FC062UU 0.620”-0.740” 4” 11” 1150 lbs. HANDLING & PREP
FC075UU 0.750”-0.990” 4” 14” 1320 lbs.
FC100UU 1.000”-1.240” 5” 15” 1920 lbs.
FC125UU 1.250”-1.490” 5” 16” 1920 lbs.
FC150UU 1.500”-1.740” 6” 18” 1920 lbs.
FC175UU 1.750”-1.990” 6” 20” 3150 lbs.
FC200UU 2.000”-2.490” 6” 22” 3360 lbs.
FC250UU 2.500”-2.990” 6” 24” 3360 lbs.
FC300UU 3.000”-3.490” 8” 26” 5280 lbs.
FC350UU 3.500”-3.990” 8” 28” 5280 lbs.

F. Standard-Duty, Closed Mesh, Offset Eye Grips

FC050OF 0.500”-0.610” 4” 11” 770 lbs.
FC062OF 0.620”-0.740” 4” 11” 960 lbs.
FC075OF 0.750”-0.990” 4” 14” 960 lbs.
FC100OF 1.000”-1.240” 5” 15” 1680 lbs.
FC125OF 1.250”-1.490” 5” 16” 1680 lbs.
FC150OF 1.500”-1.740” 5” 18” 1680 lbs.
FC175OF 1.750”-1.990” 6” 20” 2640 lbs.
FC200OF 2.000”-2.490” 6” 22” 3760 lbs.
FC250OF 2.500”-2.990” 8” 24” 3760 lbs.
FC300OF 3.000”-3.490” 9” 26” 5040 lbs.
FC350OF 3.500”-3.990” 9” 28” 5040 lbs.

G. Standard-Duty, Closed Mesh, Locking Bale Grips (Universal Eye)

FC050LB 0.500”-0.610” 18” 11” 770 lbs.
FC062LB
FC075LB 0.620”-0.740” 18” 11” 1150 lbs.
0.750”-0.990”
FC100LB 1.000”-1.240” 18” 14” 1320 lbs.
18”
FC125LB 1.250”-1.490” 18” 15” 1920 lbs.
16”
FC150LB 1.500”-1.740” 18” 18” 1920 lbs.
1920 lbs.
FC175LB 1.750”-1.990” 18” 20” 3150 lbs.
FC200LB
FC250LB 2.000”-2.490” 18” 22” 3360 lbs.
2.500”-2.990”
FC300LB 3.000”-3.490” 18” 24” 3360 lbs.
18”
FC350LB 3.500”-3.990” 18” 26” 5280 lbs.
28”
5280 lbs.

* For stainless steel support grips, add “SS” suffix to the catalog no.; For example, FC050UU becomes
FC050UUSS. Consult factory for price and appealability.

** To determine workload safety factor, divide approximate break strength by 10
All devices listed on the page conform to NEMA WD-1 and WD-6. UL Listed and CSA
Certified.

[email protected] Call Toll Free (800) 438-6013

CABLE PULLING, HANDLING & PREP

G36 Lewis Multi-Purpose Pulling Grips

X-Series Multi-Purpose Pulling Grips
Overhead, Underground Cable, Irrigation Pipe,
Wire Rope & Conduit

CABLE PULLING, Cable Class Cable Rating Conductor Size Nominal O.D. Recommended GRIP Size Range Work Load
HANDLING & PREP Primary 15kV (175 mil insul.) AWG (KC miL) (inches) Cat. No. (inches) (lbs)
Primary 15kV (220 mil insul.) 1.00 .75 - 1.25 2000
Primary 15kV (175 mil insul.) #2 1.09 XS-A-DW-24 .75 - 1.25 2000
Primary 15kV (220 mil insul.) #2 1.07 XS-A-DW-24 .75 - 1.25 2000
Primary 25kV (260 mil insul.) 1/0 1.17 XS-A-DW-24 .75 - 1.25 2000
Primary 35kV (345 mil insul.) 1/0 1.25 XS-A-DW-24 1.25 - 2.0 2500
Primary 15kV (175 mil insul.) 1/0 1.45 XS-B-TW-26 1.25 - 2.0 2500
Primary 15kV (220 mil insul.) 1/0 1.15 XS-B-TW-26 .75 - 1.25 2000
Primary 25kV (260 mil insul.) 2/0 1.24 XS-A-DW-24 .75 - 1.25 2000
Primary 35kV (345 mil insul.) 2/0 1.33 XS-A-DW-24 1.25 - 2.0 2500
Primary 15kV (175 mil insul.) 2/0 1.52 XS-B-TW-26 1.25 - 2.0 2500
Primary 15kV (220 mil insul.) 2/0 1.23 XS-B-TW-26 .75 - 1.25 2000
Primary 25kV (260 mil insul.) 4/0 1.32 XS-A-DW-24 1.25 - 2.0 2500
Primary 35kV (345 mil insul.) 4/0 1.43 XS-B-TW-26 1.25 - 2.0 2500
Primary 15kV (175 mil insul.) 4/0 1.60 XS-B-TW-26 1.25 - 2.0 2500
Primary 15kV (220 mil insul.) 4/0 1.57 XS-B-TW-26 1.25 - 2.0 2500
Primary 25kV (260 mil insul.) 500 1.73 XS-B-TW-26 1.25 - 2.0 2500
Primary 35kV (345 mil insul.) 500 1.81 XS-B-TW-26 1.25 - 2.0 2500
Primary 15kV (175 mil insul.) 500 2.02 XS-B-TW-26 2.0 - 2.75 3500
Primary 15kV (220 mil insul.) 500 1.87 XS-C-TW-32 1.25 - 2.0 2500
Primary 25kV (260 mil insul.) 750 1.96 XS-B-TW-26 1.25 - 2.0 2500
Primary 35kV (345 mil insul.) 750 2.08 XS-B-TW-26 2.0 - 2.75 3500
Primary 15kV (175 mil insul.) 750 2.25 XS-C-TW-32 2.0 - 2.75 3500
Primary 15kV (220 mil insul.) 750 2.06 XS-C-TW-32 2.0 - 2.75 3500
Primary 25kV (260 mil insul.) 1000 2.15 XS-C-TW-32 2.0 - 2.75 3500
Primary 35kV (345 mil insul.) 1000 2.23 XS-C-TW-32 2.0 - 2.75 3500
600kV (60 mil insul.) 1000 2.40 XS-C-TW-32 2.0 - 2.75 3500
Secondary 600kV (60 mil insul.) 1000 0.84 XS-C-TW-32 .75 - 1.25 2000
Secondary 600kV (60 mil insul.) #2 (#4 neutral) 0.88 XS-A-DW-24 .75 - 1.25 2000
Secondary 600kV (60 mil insul.) #2 1.06 XS-A-DW-24 .75 - 1.25 2000
Secondary 600kV (60 mil insul.) 1/0 (#2 neutral) 1.14 XS-A-DW-24 .75 - 1.25 2000
Secondary 600kV (60 mil insul.) 1/0 1.23 XS-A-DW-24 .75 - 1.25 2000
Secondary 600kV (60 mil insul.) 1/0 1.38 XS-A-DW-24 1.25 - 2.0 2500
Secondary 600kV (60 mil insul.) 4/0 (2/0 neutral) 1.46 XS-B-TW-26 1.25 - 2.0 2500
Secondary 600 kV (60 mil insul.) 4/0 1.72 XS-B-TW-26 1.25 - 2.0 2500
Secondary 350 (4/0 neutral) 2.03 XS-B-TW-26 2.0 - 2.75 3500
500 (350 neutral) XS-C-TW-32

www.americansafety.com 24 hour Fax (704) 481-0450

CABLE PULLING, HANDLING & PREP

G37Overhead Pulling Grips

Overhead Pulling Grips
For Cable & Rope Pulling

Cable Class Conductor Size Stranding Nominal O.D. Recommended Size Range Work Load CABLE PULLING,
Primary AWG (KC miL) ACSR (6/1) (inches) GRIP (inches) (lbs) HANDLING & PREP
Primary 0.316 .25-.5 1500
Primary #2 AAC (7) 0.292 Cat. No. .25-.5 1200
Primary #2 ACSR(6/1) 0.398 OH-DW-1/4”-1/2” .25-.5 1200
Primary 1/0 0.368 OH-DW-1/4”-1/2” .25-.5 1200
Primary 1/0 AAC (7) 0.447 OH-DW-1/4”-1/2” .25-.5 1200
Primary 2/0 ACSR (6/1) 0.414 OH-DW-1/4”-1/2” .25-.5 1200
Primary 2/0 0.563 OH-DW-1/4”-1/2” .5-.875 3200
Primary 4/0 AAC (7) 0.522 OH-DW-1/4”-1/2” .5-.875 3200
Primary 4/0 ACSR (6/1) 0.609 OH-TW-1/2”-7/8” .5-.875 3200
Primary 266.8 0.642 OH-TW-1/2”-7/8” .5-.875 3200
Primary 266.8 ACC (7) 0.721 OH-TW-1/2”-7/8” .5-.875 3200
Primary 336.4 ACSR (18/1) 0.741 OH-TW-1/2”-7/8” .5-.875 3200
Primary 336.4 ACSR (26/7) 0.783 OH-TW-1/2”-7/8” .5-.875 3200
Primary 397.5 ACSR (26/7) 0.814 OH-TW-1/2”-7/8” .875-1.25 4100
Primary 477 ACSR (30/7) 0.858 OH-TW-1/2”-7/8” .875-1.25 4100
Primary 477 ACSR (26/7) 0.879 OH-TW-7/8”-1 1/4” .875-1.25 4100
Primary 556.5 ACSR (18/1) 0.927 OH-TW-7/8”-1 1/4” .875-1.25 4100
Primary 556.5 ACSR (26/7) 0.966 OH-TW-7/8”-1 1/4” .875-1.25 4100
Primary 605 ACSR (18/1) 0.990 OH-TW-7/8”-1 1/4” .875-1.25 4100
Primary 636 ACSR (26/7) 1.019 OH-TW-7/8”-1 1/4” .875-1.25 4100
Primary 636 ACSR (26/7) 1.014 OH-TW-7/8”-1 1/4” .875-1.25 4100
Primary 666 ACSR (26/7) 1.051 OH-TW-7/8”-1 1/4” .875-1.25 4100
Primary 715 ACSR (30/19) 1.108 OH-TW-7/8”-1 1/4” .875-1.25 4100
Primary 795 ACSR (26/7) 1.140 OH-TW-7/8”-1 1/4” .875-1.25 4100
Primary 795 ACSR (26/7) 1.165 OH-TW-7/8”-1 1/4” .875-1.375 5700
954 ACSR (26/7) 1.196 OH-TW-7/8”-1 1/4” .875-1.375 5700
Secondary 954 ACSR (30/19) 0.760 X-HDFE-7/8”-1 3/8” .75-1.25 2000
Secondary #2 (#4 neutral) ACSR (45/7) 0.770 X-HDFE-7/8”-1 3/8” .75-1.25 2000
Secondary #2 ACSR (54/7) 0.970 .75-1.25 2000
Secondary 1/0 (#2 neutral) 600V (45 mil insul.) 0.980 XS-A-SW-24 .75-1.25 2000
Secondary 1/0 600V (45 mil insul.) 1.080 XS-A-SW-24 .75-1.25 2000
Secondary 2/0 600V (60 mil insul.) 1.160 XS-A-SW-24 .75-1.25 2000
Secondary 3/0 (1/0 neutral) 600V (60 mil insul.) 1.190 XS-A-SW-24 .75-1.25 2000
Secondary 3/0 600V (60 mil insul.) 1.270 XS-A-SW-24 1.25-2.0 2500
Secondary 4/0 (2/0 neutral) 600V (60 mil insul.) 1.310 XS-A-SW-24 1.25-2.0 2500
4/0 600V (60 mil insul.) XS-A-SW-24
600V (60 mil insul.) XS-B-TW-26
600V (60 mil insul.) XS-B-TW-26

[email protected] Call Toll Free (800) 438-6013

G38 CABLE PULLING, HANDLING & PREP

Chance® Capstan Hoists 1,000 Lb. Load Rated

A. 1,000 lb. load-rating 12V, 115V, Hydraulic, Gasoline Capstan
Hoists (3,000 lb. Models Available - Contact Customer Service)
Powerful new design for tough jobs - Improved design features
a multiple-planetary drive/back-stop-clutch assembled on the
center shaft of a steel gear case with full-length internal teeth.
This design handles more rugged jobs, extends service life
and reduces maintenance. Versatile to various applications
- Lightweight yet powerful, these portable hoists move many
heavyweight tasks and can get into remote or difficult access
sites. Examples: Setting utility poles, pulling wheeled equipment
over obstacles, raising transformers (even over fences in back
lots), hoisting heavy insulators, stringing and tension conductors,
pulling cable (indoors and underground).

A.

Cat. No. Rope Speed for Source Min. Ship. Wt
1,000 lb. load

Electric Drive 12-Volt DC - Power Hoist with 25’ #2 Cu Cable, 4 Terminals,
Relay, Foot Switch

C308-1172 22’ per minute 90 amp motor current 35 lbs.

Electric Drive 115 - Volt AC - Power Hoist and Foot Control Switch Only

C308-1170 40’ per minute 14 amps 35 lbs.

Hydraulic Drive - Power Hoist only; Foot Control Switch Sold Separately

CABLE PULLING, Optional C308-1180 93’ per minute 8 gal per min & 1,000 psi 25 lbs.
HANDLING & PREP Rope Lock
Gasoline Drive - Power Hoist and Foot Throttle Control only.
Recommended bracket: C308-0925

C308-1190 40’ per minute Engine Speed 8,000 rpm 34 1/4 lbs.

Simple technique eases all loads - Options and Components:
Graph and diagram below show capstan
principle in action. Operator effort Cat. No. Description Ship. Wt.
remains low for typical loads simply by 1.5 lbs
adding wraps on the capstan drum. So C308-0856 Optional Rope Lock - Views at left: Automatically supports load when fall
little effort is required, any crew member line is released, until operator resumes hoisting. At right: The release lanyard 5 lbs
can run the hoist. Control is so accurate, permits lowering or lifting load with precise control over speed and distance.
loads can be moved fractions of an inch. Rope Lock Device - Includes mounting bolts and washers.

C417-6145 Foot Control for 12-Volt DC Drive

Mechanical Advantage of Series 90 Hoists C417-0337 Foot Control for 115-Volt DC Drive 5 lbs.
5 C308-0685 17 lbs.
4.5 C308-1335 Foot Control for Hydraulic Drive 23 lbs.
4
All Purpose Bracket - Includes 2 chain clamps for poles, angles, beams.
Recommended Universal Bracket below for Gasoline Hoist.

3.5 E308-1321P Bolt-Down Bracket - Same as above, except does not include chain clamps. 8 lbs.

3

E308-1327 Capstan Drum - Replacement, does not include mounting bolt or washer. 3 lbs.

2.5

2 C308-0925 Universal Bracket Recommended for Gasoline - 1,000 lb. hoist. Also fits 8 lbs.
1.5 other 1,000 lb. Series 90 and earlier 750 lb. Chance hoists. Bolt down or uses
1 two C417-0346 Chain Clamps below for mounting on poles, angles, beams

T1 C417-0346 Chain Clamp for Universal Bracket only - One per Cat. No.; two required 7 1/8 lbs.
(Load Line) C308-0903 for C308-0925 Bracket 18 lbs.

Swivel Bracket only for truck bed mounting 15° interval at 360°

T2 Example: Only 12V, 115V and Hydraulic 1,000 lb. - Rated hoists are
(Fall Line) 4 wraps of rope - 1:44 ratio. recommended for truck mount. Recommended rope for capstan
That is, 1 lb. pull on Fall Line hoists: Poly-Dacron or Composite Fiber Braided (consist of
develops 44 lb. on Load Line polyester fibers)
Therefore, 20 lb. of pull
developes 880 lb of lift

www.americansafety.com 24 hour Fax (704) 481-0450

CABLE PULLING, HANDLING & PREP

G39Chance® Capstan Hoists 3,000 Lb. Load Rated

B. Electric Drive - 115 VAC, Includes Power Hoists & Foot control

switch only. (Ship. Wt. 53 lbs.)

Cat. No. C308-1370

C. Hydraulic Drive - Includes Power Hoist Only. (Ship. Wt. 39 lbs.) B.
Cat. No. C308-1380

Hydraulic Drive w/ Bayonet for Collapsible Reel - Includes Power

Hoist Only. (Ship. Wt. 39 lbs.) C.
E.
Cat. No. C308-0900
G.
D. Gasoline Drive - Includes power hoist and foot throttle control only. I.

(Ship. Wt. 53 3/4 lbs.) C308-1390 L.
M.
Cat. No.

For 40cm³ gas unit, use premium 2 cycle engine oil. Obtain from D.
local source.

3,000 lb. Hoist Rope Speed 3,000 lb load Source Min.
115 Volt AC 12 feet per minute 14 amperes motor current
Hydraulic 30 feet per minute 8 gal. per min & 1,000 psi
Gasoline 11 feet per minute Engine speed: 8,000 rpm

4 1/2” mounting bolts with each unit. Mounting flange provides 8 - F.
12” tapped holes on 5 5/8” bolt circle. Recommended rope for use H.
with capstan hoists are Poly Dacron or Composite Fiber Braided
(consists of polyester fibers). J.

Options and Components for only 3,000 lb. rated hoists: K.

Cat. No. Description Ship. Wt. CABLE PULLING,
HANDLING & PREP
E. C308-1443 All purpose bracket - Includes 2 chain clamps for poles, angles 30 lbs.
and beams.

F. E308-1434P Bolt-Down Bracket - Same as above, except with out chain 15 lbs.
clamps.

G. E308-1362P Replacement Capstan Drum - Does not include mounting bolt or 5 lbs.
washer.

C308-0820 Bayonet Adapter - Hydraulic hoist for collapsible reel for C417- 7 lbs.
0341.

H. C417-0341 Removable Capstan Drum - For 3,000 lb. hoist with bayonet: 8 12 lbs.
1/2” diameter x 8 1/2” length, on and off without tools.

I. C316-0760 Material Handler Special-Application Mount - For AC, Hydraulic, 37 lbs.
& Gas 1,000 lb., Series 90 Capstan Hoists. Where large vehicle-
mounted equipment is impractical or cannot go, portable system
sets up fast. Lifts tools, apparatus, sets poles and angle-member
structures with 1 bracket and 2 chain clamps. Can keep all activity
in view while controlling lift with tension-adjustment knob and hoist’s
foot control.

Must Order Separately. C308-0925 Bracketed for poles, beams, or angles, 2 C417-0346 Chain
Clamps, Poly-Dacron or polyester braided rope and reel.

J. C417-0343H Steel Reel with handle only 20 lbs.

Swivel Base Truck Mount - For 12V, 115C, Hydraulic 1,000 lb. Series 90 Capstan Hoists. Sets at
angles for variety of jobs. Turnable design permits proper alignment without repositioning service
vehicle. Heavy-gauge steel base bolts direct to truck body wherever convenient. Bracket can be
pinned at every 13 degree interval around circular base for stringing, tension, sagging conductors;
pulling in cable; hoisting equipment; setting poles; pulling vehicles. Warning: This is not a personnel
lifting device. A label on the unit warns against lifting people or loads directly above people. To
store hoist on C-bracket, simply remove four bolts. The C-bracket also can be bolted down for fixed
angle. Utilize truck as portable power source. Only 12V, 115V, and Hydraulic 1,000 lb. rated hoists
are recommended for truck mounting.

K. C308-0903 Swivel Bracket Only 18 lbs.

L. C308-0890 C-Bracket Only - Complete with mounting bolts 5 lbs.

M. C308-0909 Weather Shield for 12-volt DC hoist only - Complete with band 1 lb.
clamp. For transport - can remain mounted.

[email protected] Call Toll Free (800) 438-6013

CABLE PULLING, HANDLING & PREP

G40 Little Mule Hoists

Exclusive Features from A. Little Mule Hoists an Extra Measure of Reliability:
the reliable leader:
• Fiberglass Handle with Polyester Webbing - Provides added
Cast Aluminum Frame non-conductive material when using proper hot line handling techniques.

A. • Overload Feature - Solid fiberglass handle, with replaceable tips,
bends to alert the operator of a possible overload.

• Hooks and Gate Latches - All hooks swivel 360 degrees and are
equipped with latches. Optional hooks with gate latches can also
be added.

• Positive Load holding in All Environments - Double interlocking
pawls assure one pawl is engaged at all times. Dual pawl spring
provides unsurpassed reliability.

• Meets or exceeds minimum 4:1 deign factor and all requirements of
ASME/ANSI Standard B-30.21. All units tested at 125% of rated load.

Insulated Non- LIGHTWEIGHT AND RUGGED:
Fiberglass Conductive • Durable and Portable - Special cast aluminum frames.
Handle Winding • Corrosion Resistant - Stainless steel springs, drum & plated roller shafts.
Rubber Wheel • Reduced Wear - All rotating shafts are mounted on bronze bushings.
Handle Polyester
Grip Web Strap EASY TO OPERATE:
• Self-Storing Web Drum - Provides compact operation.
CABLE PULLING, 360° Forged Quick • Fast Webbing Take-up - Non-conductive winding wheel provided for
HANDLING & PREP Steel Hooks Disconnect quick take-up or positioning of slack webbing.
Design • Open Construction - Allows for easy cleaning and inspection.
• Easily Removed Sheave Block - Utilizing a quick disconnect design.
Choice of Hooks: CB-Hook DHB-Hook Converts hoist for single line use.
B-Hook DB-Hook
Choice of Hooks, Make Your Application Efficient and
Effective:
Standard Hook
Forged steel hooks provide lasting strength and durability. Will
bend open under extreme overload situations. Latches are
standard.
B - Standard Hook
Hot Stick Hook
Hot stick hooks have welded ring for use with holding sticks.
Latches standard.
DB - Includes Hot Stick Rings on all hooks and control surfaces.
Swivel Gate Hook
Bullard-type, swivel gate latch provides positive locking action for
secure load holding in all environments.
CB - Includes Swivel-type gate on all hooks.
Hot Stick Hook & Gate Latch
Rings on the latch and the hook for use on energized lines.
Holding sticks easily maneuver the latch and hooks.
DHB - Includes Hot Stick-Type Gate Latch on all hooks as well as
Hot Stick Rings on all hooks and control surfaces.

Lineman’s Hoists - Single & Double Line - 1500-4000 lbs.

Single - Line Double - Line

Cat. No. Capacity Lift Hook to Hook Capacity Lift Hook to Hook Web Strap Handle Ship. Wt.
300 (in) (lbs.)
322B (lbs.) (ft) (min/in) (lbs.) (ft) (min/in) (ft) 20 11 1/2
322DB 24 12 1/2
322CB 1500 9 21 3000 4 1/2 25 10 24 13
322DHB 1500 14 20 3000 7 23 15 24 12 1/2
344B 1500 14 20 3000 7 23 15 24 13
344DB 1500 14 23 3000 7 27 1/2 15 30 12 1/2
344CB 1500 14 22 3000 7 26 15 30 13
344DHB 2000 11 20 4000 5 1/2 23 12 30 12 1/2
2000 11 20 4000 5 1/2 23 12 30 13
2000 11 23 4000 5 1/2 27 1/2 12
2000 11 22 4000 5 1/2 26 12

www.americansafety.com 24 hour Fax (704) 481-0450

CABLE PULLING, HANDLING & PREP G41

Strap Hoists

B. Hubbell 3/4-Ton Convertible Strap Hoist - Take-up wheel
cogs for hand operation and holes for extension hot sticks. Easy-
access shifts and release key operate by hot sticks or by hand,
even with gloves. Lifetime-lubricated (oil impregnated) bronze-
sleeve bearings in hook swivels. (Ship. Wt. 14.1 lbs.)

Cat. No. PSC309-0451 B.

——————————

C. American Hotline 1-ton Nylon-Strap Hoist with RITZGLAS®
Handle - This 1-ton Nylon-Strap Manual Ratchet Hoist is used for
lifting or pulling applications in construction and maintenance of
utility installations. The ratchet handle is designed to operate from
either side of the hoist in a pushing or pulling motion. All hooks
and safety latches have hotstick eyes. The hoist handle comes
with plastic end cap suitable for rubber glove work. Hook-hook
distance is minimum or 27” and maximum of 8’.

Capacity: 1-ton
Ship. Wt. 13.9 lbs.

Cat. No. RC309-0323 CABLE PULLING,
HANDLING & PREP
——————————

D. Little Mule Series 6000 - Strongest Web Strap Puller C.
Available - D.

• Durable and Rugged - Extra large superior grade webbing with Call Toll Free (800) 438-6013
double side plate housing design.

• Positive Load Holding in all environments - provided by double
interlocking pawl mechanism.

• Extremely low handle effort - provided by special 4:1 gear reduction.

Extra Measure of Reliability
• Gate Latches - See models below.
• Added Webbing Protection - Wire from strap guide and special

bottom block roller guide web smoothly onto drum.
• Meets or exceeds minimum 4:1 design factor and all requirements of
ASME/ANSI Standard B-30.21. All units tested a 125% of rated load.

Series 6000 Lineman’s Hoist

Cat. No. Capacity Double - Line Web Handle Ship.
6000A (lbs) Lift Hook to Hook Strap (in) Wt. (lbs.)
6000DA* 6000 (ft) (min)(in) (ft) 30 26 1/2
6000CA**
27 12
5

31 1/2

* Includes Hot Stick Rings on all hooks, control surfaces, and quick
disconnect shaft.
** Includes Swivel-Type Gate on all hooks.

[email protected]

CABLE PULLING, HANDLING & PREP

G42 Lugall Strap Hoists & Chain Link Hoists

Standard These Lugall Strap Hoists are available with 1/2, 1 and 2-Ton
capacity with 3 different hook models to choose from.

Standard Latching Hook
Heat treated, forged steel hooks for lasting strength and durability.
Designed to open under overload, but they will not break. Latches
are standard.

B Model Hot Stick Hook (B Models)
U Model Hot stick hooks have welded 1” diameter ring for use with
approved hot stick tools where remote rigging is required. Hot
stick hooks, operating levers and fiberglass handles all have
operating rings and are supplied on hot stick hoist models.

A. Gate Type Hook (U Models)
Hook latch revolves on hook shank and locks under spring tension
in open or closed position.

A. 1-ton Capacity; Small Frame - Shown with standard latching
hooks. Hot Stick Rings available. Choice of safety hooks.

Single Line Capacity: 1,000 lbs.; Lift: 8’

Double Line Capacity: 2,000 lbs.; Lift: 4’

Strap Length: 8’

Handle Length: 30”

Cat. No. Description Ship. Wt.
2A Latching Hooks 10.25 lbs.
2B Hot Stick Rings & Latching Hooks 10.25 lbs.
B. 2U Gate Type Hooks 12 lbs.
C.
CABLE PULLING, B. 1 1/2-Ton Capacity; Medium Frame - Shown with standard
HANDLING & PREP D. latching hooks. Hot Stick Rings available. Choice of safety hooks.

Single Line Capacity: 1,500 lbs.; Lift: 10’

Double Line Capacity: 3,000 lbs.; Lift: 5’

Strap Length: 10’

Handle Length: 30”

Cat. No. Description Ship. Wt.
3A Latching Hooks 13 lbs.
3B Hot Stick Rings & Latching Hooks 13 lbs.
3U Gate Type Hooks
14.75 lbs.

C. 2-Ton Capacity; Medium Frame - Shown with standard
latching hooks. Hot Stick Rings available. Choice of safety hooks.

Single Line Capacity: 2,000 lbs.; Lift: 8’

Double Line Capacity: 4,000 lbs.; Lift: 4’

Strap Length: 8’

Handle Length: 36”

Cat. No. Description Ship. Wt.
4A Latching Hooks 14.75 lbs.
4B Hot Stick Rings & Latching Hooks 14.75 lbs.
4U Gate Type Hooks 16.50 lbs.

——————————

D. RA Models Link Chain Hoists - Rated load 3/4 ton. Dual
ratchet and pawl design provides easy operation and freedom from
maintenance. Body and handle built of high strength aluminum alloy
for lightweight corrosion resistance. Handle will not ratchet when
lowering a load, or accidental free chain. Link chain. Standard 5’.
Longer lifts available.

Capacity: 3/4 ton
Ship. Wt. 14.7 lbs.

Cat. No. RA-15

www.americansafety.com 24 hour Fax (704) 481-0450

CABLE PULLING, HANDLING & PREP

G43Hoists, Rope Pullers & Tension Meters

E. Chance Link Chain Hoist - High strength alloy steel, polished
for smooth action and low wear with spring loaded latch hooks.
Both top and bottom hooks swivel 360° to allow for unwinding
action of rope or cable.

Capacity: 1-ton F. E.

Ship. Wt. 14.7 lbs. G.
H.
Cat. No. 3011S
Call Toll Free (800) 438-6013
——————————

F. Hoists G Models Roller Chain - Rated loads from 3/4 to 1 1/2
tons. Standard lift is 5 feet. Single or double locking pawl models
available. Can be used to lift or pull. Easy operation from either
side. Malleable iron housing.

Cat. No. Capacity Ship. Wt.
AG 3/4 ton 18.2 lbs.
ATG 1 1/2 ton 22.5 lbs.
RA-30 1 1/2 ton
26 lbs.

——————————

G. Long Haul Rope Puller Made by Maasdam - When Safety and
Dependability Matter Most! This Long Haul Rope Puller features a
lifetime warranty. High Use Approved, 1/2” Diameter Wear Resistant
Dacron™ Polyester Rope - twisted or braided. Can Accommodate
an Unlimited Length of Rope. Rated at 3/4 ton when using Maasdam
Rope feature below. Puller and Rope sold separately.

Some Suggested Applications

• Excellent for pulling lines. Unlimited length of rope

• Recovering Vehicles CABLE PULLING,
HANDLING & PREP
• Securing materials to trucks

• Handling logs, trees, and stumps

• Moving boats and trailers

• Transporting furniture

• Clearing Debris

Description: 10:1 Leverage rope puller w/o rope

Ship. Wt. 7 lbs.

Cat. No. Description
A-0 Rope Puller
7968AX Replacement Leaf Spring

MAASDAM ROPE Description Ship. Wt.
Cat. No. 20 ft. / 1/2” 1 lb. 13 oz.
3973 50 ft. / 1/2” 4 lbs. 4 oz.
3973-50 75 ft. / 1/2” 5 lbs. 10 oz.
3973-75 100 ft. / 1/2” 7 lbs. 6 oz.
3975-100

——————————

H. Tension Meters - Its analog mechanical design accepts harsh
field conditions associated with line work. It is designed for both
harsh winter and desert conditions.
Lightweight - The A-10S weighs only 4 lbs. This includes the standard
Cable Cam Alloy link and Gunnebo-Johnson grade alloy sling hook.

Protected Face - A protective lens and stainless steel cover protect the
tension meter face from accidental contact with rigging or tools used in

line work.

Ready For Hook-Up - Its ready to use. Comes with Cambell Cam Alloy
link and Gunnebo-Johnson grade 80 alloy sling hook on A-10S and A-20S,

as shown. Alloy shackle and Gunnebo-Johnson grade 80 alloy sling hook

is standard on A-30S and A-50. Tension meter eye swivels 360°.

Cat. No. Capacity Graduation a b Wt. 1 Wt. 2
(lbs.) (lbs.) (lbs.) (lbs.)

A-10S 2,000 50 5 5/16” 5/8” 1 3/4 4
A-20S 4,000 100 5 5/16” 5/8” 2 3/4 4
A-30S 6,000 100 5 30/32” 1 3/32 5 10 1/4
A-50S 10,000 200 10 1/4” 1 3/32” 7 3/4 16 3/4

[email protected]

CABLE PULLING, HANDLING & PREP

G44 Cooper/Kearney Blocks

303 B2 Blockmaster 303 and 404 Series Handline Blocks - 303
303 B2 PJ lightweight aluminum alloy blocks are available in two basic
404 B2 PJ** designs with a choice of three types of bearings; and four hooks
in addition to swiveling top ring. 1,000 pounds Safe Working
606 B2 YW Load (SWL), 3 to 1 breaking point safety factor. Free running 3”
606 B2 H diameter sheave has a line capacity of 5/8”. 404 blocks have the
same lightweight aluminum alloy as the 303 blocks. It is available
www.americansafety.com with bronze Oilite® bearings only. 2,500 pounds Safe Working
Load. All are individually tested to four times the SWL. Free
running sheave has a 7/8” line capacity.

How to estabilsh a catalog number: The numbers after “303”
and “404” will determine features of your block. Bearing code,
head style and hook style are suffixes to the base number.

Ex. A - 303 with bronze Oilte® bearings, snatch block head, and forged
steel safety sliphook: 303B2PJ.
Ex. B - 404 with bronze Olite® bearings, snatch block head, with pull pin
only: 404B2P.

CABLE PULLING, 303 Series and Options 404 Series and Options
HANDLING & PREP Cat. No. Description Cat. No. Description
303 Basic block with closed head 404 Basic block with closed head

swivel ring swivel ring
1. Add bearing type 1. Add bearing type
B2 Bronze Oilite® bearings B2 Bronze Oilite® bearings

(standard) (standard)
B4 Sealed ball bearings 2. Add for opening head
2. Add for opening head. Exclude if not P Quick opening snatch block
required
P Quick opening snatch block head with pull pin

head with pull pin 3. Add hook type. Exclude if not
3. Add hook type. Exclude if not required
required J Forged steel safety sliphook
J Forged steel safety sliphook 4. Add if SS sheave required
K Klein-Model K443A steel S Stainless steel sheave

snap hook
M Steel meat hook

Blockmaster 606 Series Rope Snatch Block - Aluminum alloy
blocks are provided in six-inch (606 Series) for 1” and 1 1/4”
manila synthetic rope. 606 Series is rated at 5,000 pounds Safe
Working Load (SWL). All are individually tested to four times SWL.

How to establish a catalog number: The numbers after “606”
will determine features of your block. Bearing code, head style and
hook style are suffixes to the “606” number.

Ex. A - 606 with bronze Oilite® bearing and forged steel yoke: 606B2Y.
Ex. B - 606 with bronze Oilite® bearings, and forged steel safety swivel
hook with pull-pin crosshead opening: 606B2P.

606 Series and Options
Cat. No. Description
606 Basic 6” with heat treated aluminum alloy sheave for use with manila or

synthetic rope.
1. Add bearing type
B2 Bronze Oilite® bearings (standard)
B5 Timken® roller bearings with grease fittings
2. Add for opening head and hook type
H Forged steel safety swivel hook with closed crosshead opening
P Forged steel safety swivel hook with pull pin snatch block head opening
Y Forged steel yoke

24 hour Fax (704) 481-0450

CABLE PULLING, HANDLING & PREP G45

Stringing Blocks

A. Cooper 303 Model Handline Blocks - Basic block with
closed swivel ring. Sealed ball bearings. Lightweight aluminum
alloy. 1,000 lb. safe working load. 3 to 1 breaking point safety
factor. Free running 3” diameter sheave has a line capacity of
5/8”. (Ship. Wt. 2.45 lbs.)

Cat. No. 303B4PJ A. B.
D.
——————————
B. Cooper 404 Model - Bronze oilite bearings. 2,500 lb. safe work F.
load 7/8” capacity. (Ship. Wt. 6.2 lbs.) H.

Cat. No. 404B2PJ

——————————

C. Cooper Utility Handline Block’s top ring is made of forged C.
steel and can swivel. Sheave has free running 3” diameter of
rugged aluminum alloy. Bronze oilite standard bearings. 1,000 lb.
load capacity. 5/8” diameter rope capacity. 6” long, 3 1/2” wide, 2
1/2” deep. Safety slip hook has forged steel 4 3/8” long. (Ship. Wt.

2.4 lbs.)

Cat. No. 3500-BK

——————————

D. Cooper 3505 Model Block is the same as the 3500-BK but E. CABLE PULLING,
with a meat hook. Top ring is made of forged steel and can swivel. HANDLING & PREP
Sheave has free running 3” diameter of rugged aluminum alloy.
Bronze oilite standard bearings. 1,000 lb. load capacity. 5/8”
diameter rope capacity. 6” long, 3 1/2” wide, 2 1/2” deep. Steel
meat hook 5 1/2” long. (Ship. Wt. 2.45 lbs.)

Cat. No. 3505-BK

——————————

Cooper Regular Wood Shell Blocks for Manilla Rope - Hard
wood shells, Drop forged fittings, Available with bronze self-
lubricating bushings & galvanized metal parts.

Hook Type: Swivel hook with latch G.
Block Size: 4”
Rope Diameter: 1/2”
Sheave: (2 1/4” O.D., 5/8” Rim., 3/8” Pin Dia.)

Cat. No. Block Work Load Ship. Wt.
E. 720-5434 Single 1,000 lbs. 2 lbs.
F. 720-6934 Double 1,400 lbs. 3 lbs.
G. 720-8534 Triple 1,800 lbs. 4 lbs.

——————————
Cooper B&L Star Metal Blocks for Manila or Fiber Rope - Steel
shells, bronze self-lubricating bushings & galvanized finish.

Block: 4” I.
Rope Diameter: 1/2”
Sheave: (2 1/4” O.D., 5/8” Rim., 3/8” Pin Dia.)

Cat. No. Block/Hook Type Work Load Ship. Wt.
H. 724-5434 2.5 lbs.
I. 724-5436 Single/Swivel Hook w/latch 1,100 lbs. 2.5 lbs.

Single/Screw Pin Shackle 1,100 lbs.

[email protected] Call Toll Free (800) 438-6013

CABLE PULLING, HANDLING & PREP

G46 Stringing Blocks

A. Cooper Nylon Blocks for Manilla Rope - Nylon shells and sheaves,
C. fittings are drop-forged, plated strap and connections. Block: 2”; Rope Dia.:
E.
G. 3/8” - 1/2”; Sheave: (2” O.D., 5/8” Rim., 3/8” Pin Dia.)

B. Cat. No. Hook Type Block Work Load Ship. Wt.
D.
A. 722-0214 Swivel w/latch Single 500 lbs. 7 oz.
F. B. 722-2214 Swivel w/latch Double 1,000 lbs. 12 oz.
H.
——————————
I.
Cooper Drop Link Snatch Blocks for Manilla Rope - Double,

cross bolted shell of wood or steel. Bronze self-lubricating bushings.

Fittings drop forged & metal parts are painted or galvanized. Note: Drop

link snatch blocks are primarily used as lead blocks. Not recommended for

hoisting. Hook Type: Stiff swivel hook with latch.

Block Size (in): 4 6 8 10

Diameter Rope (in): 3/4 7/8 1 1 1/4

Sheave O.D.: (in) 2 3 4 1/2 5 3/4

Rim Size (in): 7/8 1 1/8 1 3/8 1 7/8

Bearing Diameter Size (in): 5/8 3/4 7/8 1

Center Pin Diameter (in): 3/8 1/2 5/8 3/4

Cat. No. Shell Block Rope Diam. Work Load Ship. Wt.

C. 726-5486 Wood 4” 3/4” 750 lbs. 2 lbs.
C. 726-5686 Wood 6” 7/8” 2,400 lbs. 9 lbs.
C. 726-5886 Wood 8” 1” 4,800 lbs. 12 1/2 lbs
D. 726-5696 Steel 6” 7/8” 2,400 lbs. 6 lbs.
D. 726-5896 Steel 8” 1” 4,800 lbs. 13 lbs.

——————————

CABLE PULLING, Cooper Safety Locking Snatch Blocks for Manila Rope -
HANDLING & PREP
Bronze self-lubricating bushings. Fittings drop forged with galvanized

finish. Hook Type: Stiff swivel hook with latch

Block Size (in): 4 6 8

Diameter Rope (in): 3/4 7/8 1

Sheave O.D.: (in) 2 3 4 1/2

Rim Size (in): 7/8 1 1/8 1 3/8

Bearing Diameter Size (in): 5/8 3/4 7/8

Center Pin Diameter (in): 3/8 1/2 5/8

Cat. No. Shell Block Rope Diam. Work Load Ship. Wt.

E. 726-7186 Wood 6” 7/8” 3,000 lbs. 9 lbs.
F. 726-7196 Steel 6” 7/8” 3,000 lbs. 6 lbs.
F. 726-7396 Steel 8” 1” 5,000 lbs. 13 lbs.

——————————

Cooper Lineman’s Snatch Block - Galvanized block used for

stringing light conductor wire. Fits around insulator pin or in insulator hole

& can readily be driven into pole or crossarm. With or without hook, bronze

self lubricating bushings or ball bearing bushings.

Bronze Bush, SL Roller Bush

Cat. No. Cat. No. Description Ship. Wt.

G. 738-0602 738-0601 w/hook 2 1/2 lbs.

H. 738-0603 738-0604 w/o hook 2 1/4 lbs.

——————————

I. Cooper Insulated Tackle Blocks -Designed for all types of hoisting

related jobs. They are especially ideal for hot line use. Bodies are made

from high impact, dielectric thermoplastic material, all hooks have full swivel

capabilities. Sheaves are made with fiberglass reinforced nylon material,

shafts are stainless steel and hooks have hot eye for hot stick applications.

Blocks only-No rope.

Cat. No. Upper Lower Ship. Wt.

11361 2 Sheave 2 Sheave 6 1/2 lbs.

11367 3 Sheave 2 Sheave 6 3/4 lbs.

www.americansafety.com 24 hour Fax (704) 481-0450

CABLE PULLING, HANDLING & PREP

G47Stringing Blocks

J. The Universal Stringing Blocks from Campbell Speciality
are a truly universal model that may be used as a suspension
block on an insulator, pole bracket, crossarm bracket or many
accessories. Attaches to a crossarm bracket or accessories in any
five of the positions shown in the illustration below without extra
fittings by a single non-lockable safety locking pin. Made from high
strength aluminum alloy cast in permanent molds for uniformity.

Any of five positions, vertical, -67 1/2,̊ - 45°, - 27 1/2̊ and right J.
angle are possible without extra attachments.

Cat. No. Sheave Dia. Work Load Ship. Wt.
A5053 5” 2,000 lbs. 7 lbs.
A5072 7” 2,500 lbs.
10 lbs.

Conductor Capacity: Without Liners: 2”
1 3/4”
With Liners:

Choose One Type of Bearing:

• Self Lube: SLB

• Roller Bearing: RB

Extra for Neoprene Liners: NL

Extra for Urethane Liners: UL

No. 2A bracket for use with No. A5072 Block, No. 2B bracket for
use with No. A5053 Block
Accessories for use with Blocks A5053 & A5072

To order accessories, use the block number followed by the CABLE PULLING,
accessory number. Example: A50724 to order the A5072 HANDLING & PREP
block with accessory 4.

K. 5 - Will adapt to most vertical and horizontal line post
insulators. Unique in design, it has an adjustable slide
section that enables the lineman to adjust it to fit the
clamp receptacle in the insulator.
LC. 1a2t. -NPoo. le br acket 5
attaches to pole with chain and
tightening device. Fabricated from steel plate.
Cat. No. 12
M. 4B - Universal brackets may be clamped to either a
crossarm or a pole and the block may be used vertically or
four angle positions.
NC. a9t-. No. 4B M.
Clamps to round arms with rubber pads and screws. Unit K. L. P.
complete. Block not included. O.
Cat. No. 9
O. 10 - Insulator clamping bracket. Clamps to tie-top insulators
with adjusting screws. Block attaches to bracket with locking pin
and may be used vertically or in any of four angles.
P.C8at-. No. 10
Standard A5072 block fitted with 3” or 7” uplift roller
assembly A50723 with 3” uplift roller shown. (See below)
Cat. No. 8

Blocks with 3” & 7” Uplift Rollers (see accessory #8 above)
Cat. No. Ship. Wt.
A50723 13 lbs.
A50727 16 lbs. N.

Sheave Diameter: 7”

Conductor Capacity: Without Liners: 2”

With Liners: 1 3/4”

Choose One Type of Bearing:

• Self Lube: SLB

• Roller Bearing: RB

Extra for Neoprene Liners: NL

Extra for Urethane Liners: UL

Working Load Pounds: 2,500

[email protected] Call Toll Free (800) 438-6013

CABLE PULLING, HANDLING & PREP

G48 Stringing Blocks

A. B. 7” Universal Stringing Block - A high-strength alloy gives this
block a 2,500 lb. safe working load. The throat opening is 3 3/4”
high and 3 1/8” wide. The 3” wide sheave runs on heavy duty
sealed ball bearings. The socket eye accepts the optional fittings
to suspend the block. The spring loaded latch automatically closes
and locks. It can be operated easily with a hotstick.

Cat. No. Description Ship. Wt.
A. CB-1 Not Lined 8 lbs.
B. CB-1L
With Urethane Lined Sheave 8 lbs.

C. Universal Crossarm Bracket - Its unique design allows the
CB-1 blocks to be mounted to a crossarm at almost any angle. Fits

crossarms from 4” x 4” to 4” x 6”.

Cat. No. AB-1

C. ——————————

CABLE PULLING, D. Wide Throat Aluminum Stringing Blocks -
HANDLING & PREP
D. These are a larger version of our standard stringing
blocks. The deep “V-Groove” of the 4” wide sheave was
designed to accept T2 wire up to 795. The sheaves are
urethane lined to help protect the conductor.

Drop a handline hook between the top bar and frame. Attach the
hook to the middle bar to help lift the block into position.

Tie a line to the bottom bar and secure the block at an angle when
pulling around a corner.

Cat. No. A B C D Working Load Limit Ship. Wt.

W28U 28” 4” 5 1/2” 38 3/4” 12,000 lbs. 68 lbs.

——————————

B

C E. Grounded Aluminum Stringing Blocks - These are our

E. standard large throat and wide throat stringing blocks with a
unique grounding attachment mounted to the frame. The 3/4” x 4
1/2” stud accepts virtually any grounding clamp. The 5” aluminum
roller is kept in constant contact with the conductor by dual heavy-
duty springs.
AD

Cat. No. A B C D Working Load Ship Wt.
Limit
Large Throat Grounded Stringing Blocks 64 lbs.
SB22U-G 22” 3 1/8” 5 11/16” 31 9/16” 12,000 lbs. 75 lbs.
SB28U-G 28” 3 1/4” 5 13/16” 37 9/16” 12,000 lbs. 83 lbs.
Wide Throat Grounded Stringing Blocks
W28U-G 28” 4” 5 1/2” 38 3/4” 12,000 lbs.

www.americansafety.com 24 hour Fax (704) 481-0450

CABLE PULLING, HANDLING & PREP G49

Radius Blocks & Sagwatch

Radius Blocks are used in lieu of full diameter blocks. Lightweight F.
and durable, they rotate freely from a vertical to horizontal
position when used in a corner structure. Designed to help ease
the installation of overhead fiber optic cable (OPGW) as well as
static wire. Block # TERB5324C has two adjustable top rollers
that capture and the pulling line and conductor keeping them from
rolling out.

F. 3 Roller, 22” Radius Block -

• 4,000 lb. safe working load

• Accepts wire up to 2” in diameter

• Three 7” diameter hi-dentisty polymer sheaves

• 16” high x 23 1/2” long

Ship. Wt. 28 lbs.

Cat. No. TERB3222

G. 5 Roller, 24” Radius Block - G.

• 4,000 lb. safe working load

• Accepts wire up to 3” in diameter

• Adjustable top rollers keep wire from “rolling out”

• Seven 5” diameter hi-density polymer rollers

• 19” high x 40” long CABLE PULLING,
HANDLING & PREP
Ship. Wt. 48 lbs.

Cat. No. TERB5324C K.

Suspension Attachments - These attachments can be used to J.
hang any of our stringing blocks.

Cat. No. Description I.
H. 15 Y-Ball Clevis
I. T12 Safety Hook
J. 14 Ball Clevis
K. 14A Ball Clevis w/Captive Pin

——————————

H.

L. Sagwatch - Used to accurately determine sag
simply and rapidly. Water and shock resistant, it is

antimagnetic and housed in a stainless steel case.

Scale Capacity Graduations
3rd Return Sag up to 36 Feet Feet & Decimals
5th Return Sag up to 100 Feet Feet & Decimals
Seconds Seconds up to 30 Tenth of a second

Cat. No. SW-E

[email protected] Call Toll Free (800) 438-6013

CABLE PULLING, HANDLING & PREP

G50 Cable Sag Tools & ACSR Trimmers

A. Clipping Hook - 6,500 lb. capacity.

Cat. No. S22-771

A. ——————————
B. B. Sag Scope - The “Double Bubble” feature allows for vertical
and horizontal leveling. The 3 x 9 power scope with cross hairs
mounts easily to either wooden poles or steel structures. The
complete kit includes a padded, high-impact storage case.

Cat. No. 724

——————————
C. Sagometer - An accurate thermometer encased in a section of
aluminum conductor. This helps determine the temperature of the
conductor being sagged, Range is -40̊ to 160̊ F.

Cat. No. CT40-160

——————————
D. Pulling Eye - Adjusts from 1/2” to 1” with a 6,000 lb. capacity.

Cat. No. TEPE-1

CABLE PULLING, ——————————
HANDLING & PREP ACSR Trimmer - Quickly and accurately removes the aluminum
stranding from around the steel core. Made of an aluminum alloy,
this tool is lightweight and durable. The cutter, bushing holder and
storage case are sold as one unit. The case has slots to store 11
bushings while the 12th bushing is stored in the bushing holder.

Common Bushings for PSC-1 and PSC-2 on next page.

Cat. No. Description
E. PSC-1 Regular ACSR Trimmer
F. PSC-2 Large ACSR Trimmer, for conductor sizes

2034500 and larger

PARTS FOR PSC-1 & PSC-2 TRIMMERS
Item Cat. No. Description
C. 1 TE54140 Plastic Carrying Case
D. 2 TE54145 Cutter Frame, PSC-1 & PSC-2
3 TE54160 Bushing Holder Assembly
4 TE54165 Bar & Feed Screw Assembly
5 TE54625 Knob Assembly
6 TE54280 Pin Screw & Wing Nut Assembly
7 TE54285 Roller & Roll Pins(2)
8 TE54305 Cutter Wheel Axle
9 TE54270 Cutter Wheel for PSC-1
9 TE54170 Cutter Wheel for PSC-2

2

7

E. 6 9

8
3

F.

4

www.americansafety.com 24 hour Fax (704) 481-0450