Solutions for
Energy Generation
and Grid Management
Ready for the Energy Challenges
GPTech
GPTech
Ready for the Energy Challenges
Ready for the Energy Challenges
GPTech
2
Corporate Social Responsability
RELIANCE PROFIT CAPACITY
GPTech GPTech GPTech
GPTech,
GPTech
3
Sustainable future depends on ethical commitments
GPTech
•
•
•
•
4
5
UTILITY-SCALE SOLUTIONS
6
••
••
••
••
••
•
•
••
••
•
7
SmartPV
GPTech SmartPV
SmartPV
8
PV installations
•
9
GPTech SmartPV+
SmartPV+
PV installations Restrictive grid
codes
Islanding
conditions Control
requirements
•
•
•
•
11
EnergyReserve
•
•
•
EnergyReserve
••
••
••
+ ESS integration System operators
- requirement
Islanding €
conditions
+ Producers
• - Aggregator
•
• + Power Plant
-
•
generators needs
13
GPTech HybridSystem
HybridSystem
HybridSystem
+ PV+ESS System operators
- requirement
integration
Islanding €
conditions
+ Producers
- Aggregator
Control + Power Plant
requirements -
generators needs
•
•
•
•
15
PVI www
PCS www
+
-
AMPS www
+
-
16
EMSystems www
•
•
•
•
•
•
STATCOM www
•
•
•
•
•
€ SCADA www
+!
-
17
MAIN
FEATURES
MODULAR
DESIGN
HEAD POWER
MODULE MODULES
18 DIMENSIONS
OPTIONALS
19
Single Master&Slave MPPT Multi-MPPT
DC input DC input #1 DC Input #2 DC Input #3
AC side
AC side
Prepared to pick and place Front & Rear Access door with High quality busbar for
in the final destination with a direct ac- cess in AC and DC
Plug&Play transformer
minimum pre-installation sides to >90% of critical
elements. Optimize the routine connection. Simple, fast and
maintenance of the equipment,
with less tooling requirements.
making it easier and faster
20
•
•
•
•
•
TOP-BOTTOM
Dust >1000 Salty-Air IP54 / IP65
protected m.a.s.l. Ready
Sealing elements and
Filters and protections Able to work with the Internal electronics and standard IP54 enclosure
to avoid dust entrance best conditions in components are coated Protection for rain and
to resist corrosive salty
combined with top- remote high-altitude humidity.
bottom cooling system mountain region conditions
• PPC
•
Local control
21
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
22
Application # DC/AC PM DC/AC Tech WD3 - V AC VOLTAGE
IS/PCS/SVC
[a] [DCAC] [YYY]
o
o
o
o
o
1650 mm.
1050 mm.
2460 mm.
2000 mm.
2973 m.
1650 mm.
1050 mm.
2460 mm.
2000 mm.
4273 m.
1650 mm.
1050 mm.
2460 mm.
2000 mm.
5573 m.
23
Notes (6) Self-consumption is not considered in the efficiency measurement
(7) At rated AC power @PF=1 @ 35ºC (95 ºF)
(1) At 100% Uac_nom, full power and cos ϕ = 1 (8) An extended operating temperature range is possible under request
(2) DC load break switch per power module (9) IP65 under request
(3) Dual DC load break switch per power module
(4) Different DC fuse sizes are available. Optionals for BPCS
(5) Other voltage configurations are possible under request
24
Notes (6) Self-consumption is not considered in the efficiency measurement
(7) At rated AC power @PF=1 @ 35ºC (95 ºF)
(1) At 100% Uac_nom, full power and cos ϕ = 1 (8) An extended operating temperature range is possible under request
(2) DC load break switch per power module (9) IP65 under request
(3) Dual DC load break switch per power module
(4) Different DC fuse sizes are available. Optionals for BPCS 25
(5) Other voltage configurations are possible under request
26
••
••
••
•
••
•
•• •
•
• •
• •
• •
•
••
•
•
Single master&slave MPPT MMuultlit-iMMPPPTT
AC side D DCDiCnpInuptu1t DDCCinInppuutt 2#2 DDCCinInppuutt 3
AC#s1ide
AC DCC input #3
Input
Single MPPT for centralised inverter function, AC Multi-MPPT optimises the
joining and optimizing conversion with Output connection of several PV fields
Master&Slave Configuration with independent DC inputs.
•
•
•
•
•
•
•
•
•
POWER POWER HEAD MV MV
MODULE MODULE MODULE TRANSFORMER SG
2 1
POWER POWER POWER POWER HEAD MV MV
MODULE MODULE MODULE MODULE MODULE TRANSFORMER SG
4 3 2 1
31
•
•
•
AMPS UTILITY AMPS MV Switch UTILITY
ACCESS ACCESS
UTILITY UTILITY
SCADA PLANT SCADA
/ EMS / EMS
MV Switch AMPS
Controller
AMPS
Controller
AC Sensors AC Sensors
DC Measurements DC Measurements
Monitoring AC Monitoring
Von DC
Von DC DC DC Up to
DC DC DC 3xDC/DCi
AC AC
V1n DC AC/DCn AC DC AC/DCn
DC V1n
DC DC DC Up to
DC DC DC 3xDC/DCi
V2n V2n
+ - DC inputs + - DC inputs
examples examples
PVs
ESSs
Electrolyzers
PVs
ESSs
Electrolyzers
32
33
2460 mm. 1650 mm.
2000 mm. 1050 mm.
2973 m.
34
# PS PM DC/AC tech # DC/DC % DC/DC DC/DC topology AC
PM
PM B/BB
[b]
[c] [DCAC] [a]
. WD3 VMP - VOLTAGE GROUNDING
[YYY] [N,P,F]
•
•
o
o
•
•
•
•
35
Notes (6) Self-consumption is not considered in the efficiency measurement
(7) At rated AC power @PF=1 @ 35ºC (95 ºF)
(1) At 100% Uac_nom, full power and cos ϕ = 1 (8) An extended operating temperature range is possible under request
(2) DC load break switch per power module (9) IP65 under request
(3) Dual DC load break switch per power module
(4) Different DC fuse sizes are available. Optionals for BPCS
(5) Other voltage configurations are possible under request
36
Notes
(1) Operation DC input voltage has to be lower than operation DC output voltage for a correct behavior.
37
Notes (6) Self-consumption is not considered in the efficiency measurement
(7) At rated AC power @PF=1 @ 35ºC (95 ºF)
(1) At 100% Uac_nom, full power and cos ϕ = 1 (8) An extended operating temperature range is possible under request
(2) DC load break switch per power module (9) IP65 under request
(3) Dual DC load break switch per power module
(4) Different DC fuse sizes are available. Optionals for BPCS 38
(5) Other voltage configurations are possible under request
Notes
(1) Operation DC input voltage has to be lower than operation DC output voltage for a correct behavior.
39
Power Plant – Characteristics supported by the PPC
Communications
41
Controls at the Point of Interconnection
Service/Maintenance System
42
Power Supply
Power analyzers
Wired Input/Output signals
Ambient Conditions (standard)
Mechanical Characteristics
43
▪
▪
▪
▪
▪
▪
▪
Iout@35ºC, 1250Vdc Technical details [A]
Iinput@35ºC, 1250Vdc 1600 [A]
1600
Vdc max 1500 [Vdc]
Efficiency @35ºC, 1250Vdc, 1600A
Breaking Capacity @35ºC, 1250Vdc >99.5 [%]
Opening time
Input Inductance 8400 [A]
Losses
Application <10 [us]
Programmable tripping properties
Constant load current monitoring <100 [uH]
Altitude
Certifications <3000 [W]
Renewable Energy, Battery Storage
Projects over 4000m
IEC 61439; UL 508:
44
▪ Shrot circuit
Shrot circuit
▪
▪ 45
▪
▪
▪
▪
46
47
→ +4 GW
installed &
+ 426 MW Installed +1500 MWh ESS
+ 426 MW under Warranty integrated
*Commited : + 600 MW *+2000 MWh
commited for
SMART PROGRAM, USA – 80 MW/ 105 MWh 2021/2022
KEKAHA, HAWAII – 21 MW/ 87 MWh
NEW ORLEANS – 1,5 MW / 0,5 MWh
LAWAI, HAWAII – 28 MW / 116 MWh
ORIANA, PR – 22 MW / 4,2 MWh
SALINAS, PR – 5,5 MW / 1,26 MWh
LA PAZ, MX – 10 MW / 5,6 MWh
WAIKOLOA, HAWAII – 30 MW / 150 MWh
MAUI, HAWAII – 60 MW /300 MWh
OAHU, HAWAII – 12,5 MW / 62,5 MWh
*Commited : + 350 MW/ 1500 MWh
+ 746 MW Installed
+ 305 MW under Warranty
ANDES 2B – 116 MW / 580 MWh
COPIHUE – 2,5 MW / 2,5 MWh
BALZAY MICROGRID, ECU – 0,25MW / 0,25MWh
CIUDADE INTELIGENTE BUZIOS,BR -0,1MW / 0,2 MWh
PETROBRAS –1 MW / 0,5 MWh
*Commited : + 130 MW/ 650 MWh
48
→ +4 GW
installed &
+1795 MW Installed +1500 MWh ESS
+110MW under Warranty integrated
*+2000 MWh
SPAIN – 2 MW / 0,11 MWh commited for
BAILESTI, RU – 1 MW / 1 MWh 2021/2022
PORTUGAL – 0,11 MW/ 0,16 MWh
*Commited : + 1,26 MW/ 6,31 MWh
+343 MW Installed +241 MW Installed
+240 MW under Warranty +205 MW under Warranty
KOREA - LA PAZ - 0,75MW / 0,75MWh
AUSTRALIA - KATHERINE SOLAR FARM
6MW / 3,5 MWh
49
CASE Ratings Power
LOCATION
PV ESS converter EMSystem STATCOM SCADA
SMART Program
Massachusetts USA Samsung:
75 MW 75 MW / GPTech GPTech NO GPTech
105 MWh AMPS PPC
KATHERINE SOLAR FARM GPTech PCS
AUSTRALIA +
6 MW Narada: PV inverter GPTech NO NO
6 MW / SMA PPC
3,5 MWh
KEKAHA
HAWAII USA
Samsung: GPTech GPTech NO GPTech
21 MW 21 MW / AMPS PPC
87 MWh
AURA GPTech PCS
LA PAZ-MEXICO +
25 MW LG: PV inverter GPTech NO NO
10 MW / HUAWEI PPC
5.605 kWh
50