TAPETEX 66

tapetex

wall materials

66

textiles variety



tapetex wall materials

BANDOL SOLID / BANDOL METALLIC tapetex wall materials

BANDOL SOLID / BANDOL METALLIC tapetex wall materials

Sustainability Application

All dyeing, printing, laminating, finishing, etc., is totally water based. All wall materials must be installed by an experienced installation
The products do not contain PVC, plasticizers or heavy metals. Professional who understands wallcovering use and installation
The manufacturing uses renewable energy, wind hydro and Requirements.
Solar systems. A premixed heavy duty, clear vinyl adhesive should be used.
Do not dilute.
Surface finish
All qualities are precision trimmed and the drops can be
All qualities are stain repellent finished. This finish prevents oil Butt jointed.
Or water based splashes penetrating and staining the material.
Any such splash will simply bead up on the surface and then, Installation instructions are supplied with every roll.
Providing it has not yet dried, can easily be removed by gentle
Blotting with an absorbent tissue or cloth. These wall materials are decorative products, not technical
Take care not to rub the surface as this may push any liquid into Products, and intended for interior use.
The material and create a stain. Once a stain has been allowed
To dry, it is virtually impossible to remove. Caution

Permeability After hanging 3 lengths of material, check, for any defects.
If there is a problem contact your supplier immediately.
A successful installation requires that walls are not subject to No claims can be considered if more then 3 lengths have been cut.
Moisture accumulation restricting the escape of moisture and
Increasing the risk of mold growth. In this respect it is essential Maintenance
That the wallcovering has a good moisture permeability.
Permeability is a measure of the amount of water vapour moisture All the designs are stain repellent finished.
That can pass through a specified material in a certain amount of time. Periodic vacuuming is also recommended to prevent dust
The degree of permeability is expressed in units referred to as From building up on the materials surface.
Perms. Materials with high perm levels, such as all qualities in this
Book, will allow more moisture to pass through than those with Delivery
Lower perm values.
A copy of the test report as per ASTM E96-95, standard test for From stock by the full linear meter or linear yard.
Water vapour transmission of materials, is available on request.
Specification Bandol Solid : 300
Fire classification Name 137 cm – 54” : 9.7
Width approx gr / lm : 100%
ASTM E84 adhered Class A and Euroclass fire rated. Weight approx oz / lnyd
Reports are available on request. linen : no
The Fire Rating should not be construed to indicate hazards Composition height : no
Presented under actual fire conditions. Repeat wide
random
Lightfastness Hanging

The test results as per I.S.O 105B method 1, Heraeus original Name Bandol Metallic : 360
Hanau Xenotest 150S, are minimum 5 on the standard blue scale. Width approx 137 cm – 54” : 11.6
The test report is available on request. Weight approx gr / lm : 100%
oz / lnyd
Variations Composition linen : no
Repeat height : no
These fabrics have been manufactured using mainly natural fibres. wide
Any slubs, impurities and irregularities in texture and colour Hanging random
Are characteristic of these natural yarns and enhance the nature
Of the fabric and cannot be considered a fault.
There can be a variation between the sample material and
The delivered product.

Made in Holland 66/16

BANDOL SOLID / BANDOL METALLIC width 137 cm – 54”

66-1570 BANDOL SOLID

tapetex wall materials

66-1571 BANDOL SOLID 66-1572 BANDOL SOLID 66-1573 BANDOL SOLID

66-1574 BANDOL SOLID 66-1575 BANDOL SOLID 66-1576 BANDOL SOLID

66-1577 BANDOL METALLIC 66-1578 BANDOL METALLIC 66-1579 BANDOL METALLIC

BANDRA WILD SILK tapetex wall materials

BANDRA WILD SILK tapetex wall materials

Sustainability Application

All dyeing, printing, laminating, finishing, etc., is totally water based. All wall materials must be installed by an experienced installation
The products do not contain PVC, plasticizers or heavy metals. Professional who understands wallcovering use and installation
The manufacturing uses renewable energy, wind hydro and requirements.
Solar systems. A premixed heavy duty, clear vinyl adhesive should be used.
Do not dilute.
Surface finish
All qualities are precision trimmed and the drops can be
All qualities are stain repellent finished. This finish prevents oil butt jointed.
Or water based splashes penetrating and staining the material.
Any such splash will simply bead up on the surface and then, To obtain a balanced effect across the wall, it is advisable
Providing it has not yet dried, can easily be removed by gentle To cut and arrange all the drops for one wall, prior hanging.
Blotting with an absorbent tissue or cloth. Non-reverse hang unless otherwise stated on the roll.
Take care not to rub the surface as this may push any liquid into Installation instructions are supplied with every roll.
the material and create a stain. Once a stain has been allowed These wall materials are decorative products, not technical
to dry, it is virtually impossible to remove. Products, and intended for interior use.

Permeability Caution

A successful installation requires that walls are not subject to After hanging 3 lengths of material, check for any defects.
moisture accumulation restricting the escape of moisture and If there is a problem contact your supplier immediately. No claims
Increasing the risk of mold growth. In this respect it is essential Can be considered if more than 3 lengths have been cut.
That the wallcovering has a good moisture permeability.
Permeability is a measure of the amount of water vapour (moisture) Maintenance
That can pass through a specified material in a certain amount of time.
The degree of permeability is expressed in units referred to as All the designs are stain repellent finished.
Perms. Materials with high Perm levels, such as all qualities in this Periodic vacuuming is also recommended to prevent dust from
book, will allow more moisture to pass through than those with Building up on the materials surface.
Lower Perm values.
A copy of the test report as per ASTM E96-95, standard test for Delivery
water vapour transmission of mater, is available on request.
From stock by the full linear meter or linear yard.
Fire classification
Specification Bandra Wild Silk
ASTM E84 adhered Class A and Euroclass fire rated. Name
Reports are available on request. Width approx 137 cm – 54”
The Fire Rating should not be construed to indicate hazards Weight approx
Presented under actual fire conditions. gr/lm : 300
Composition
Lightfastness oz/inyd : 9.7
Repeat
The test results as per I.S.O. 105B method 1, Heraeus original silk : 90 %
Hanau Xenotest 150S, are minimum 5 on the standard blue scale Hanging
The test report is available on request. polyester : 10 %

Variations height : No

The Silk designs are hand woven from homespun and hand dyed wide : No
Silk. As such, there may be stronger impurities and irregularities
In colour and texture within the roll and between the different rolls random non-reverse straight
Even if from one lot. This, together with the horizontal weave,
will create a pleasant panelling effect on the wall. These variations
are characterisiic of these natural fabric and enhance the nature
Of fabric and cannot be considered a fault.
There can be a variation between the sample material and
The delivered product.

Made in Holland 66/4

BANDRA WILD SILK width 137 cm – 54”
66-1440

tapetex wall materials

66-1441 66-1442 66-1443

66-1444 66-1445 66-1446

66-1447 66-1448 66-1449

BELLE EPOQUE tapetex wall materials

BELLE EPOQUE tapetex wall materials

Sustainability Application

All dyeing, printing, laminating, finishing, etc., is totally water based. All wall materials must be installed by an experienced installation
The products do not contain PVC, plasticizers or heavy metals. Professional who understands wallcovering use and installation
The manufacturing uses renewable energy, wind hydro and requirements.
Solar systems. A premixed heavy duty, clear vinyl adhesive should be used.
Do not dilute.
Surface finish
All qualities are precision trimmed and the drops can be
All qualities are stain repellent finished. This finish prevents oil butt jointed.
Or water based splashes penetrating and staining the material.
Any such splash will simply bead up on the surface and then, This design requires a flat wall surface. this quality has a nap and
Providing it has not yet dried, can easily be removed by gentle should therefore be hung non-reverse straight or on repeat.
Blotting with an absorbent tissue or cloth. Installation instructions are supplied with every roll.
Take care not to rub the surface as this may push any liquid into
the material and create a stain. Once a stain has been allowed These wall materials are decorative products, not technical
to dry, it is virtually impossible to remove. Products, and intended for interior use.

Permeability Caution

A successful installation requires that walls are not subject to After hanging 3 lengths of material, check for any defects.
moisture accumulation restricting the escape of moisture and If there is a problem contact your supplier immediately. No claims
Increasing the risk of mold growth. In this respect it is essential Can be considered if more than 3 lengths have been cut.
That the wallcovering has a good moisture permeability.
Permeability is a measure of the amount of water vapour (moisture) Maintenance
That can pass through a specified material in a certain amount of time.
The degree of permeability is expressed in units referred to as All the designs are stain repellent finished.
Perms. Materials with high Perm levels, such as all qualities in this Periodic vacuuming is also recommended to prevent dust from
book, will allow more moisture to pass through than those with Building up on the materials surface.
Lower Perm values.
A copy of the test report as per ASTM E96-95, standard test for Delivery
water vapour transmission of mater, is available on request.
From stock by the full linear meter or linear yard.
Fire classification
Specification Bell Epoque
ASTM E84 adhered Class A and Euroclass fire rated. Name
Reports are available on request. Width approx 137 cm – 54”
The Fire Rating should not be construed to indicate hazards Weight approx
Presented under actual fire conditions. gr/lm : 510
Composition
Lightfastness oz/lnyd : 16.4
Repeat
The test results as per I.S.O. 105B method 1, Heraeus original silk : 90 %
Hanau Xenotest 150S, are minimum 5 on the standard blue scale Hanging
The test report is available on request. polyester : 100 %

Variations height : 3.9cm-1.5”

As with real suede, this quality has a nap which can occasionally wide : 8.3cm-3.3”
Produce a slight panelling effect.
Handling or touching changes the direction of the nap, but this non-reverse on repeat
Can be eliminated by brushing the nap in the same direction,
With a soft clothes brush.
There can be a variation between the sample material and
The delivered product

Made in Holland 66/20

BELLE EPOQUE width 137 cm – 54”

66-1620

tapetex wall materials

66-1621 66-1622

66-1623 66-1624

BRADFORD WOOL tapetex wall materials

BRADFORD WOOL tapetex wall materials

Sustainability Application

All dyeing, printing, laminating, finishing, etc., is totally water based. All wall materials must be installed by an experienced installation
The products do not contain PVC, plasticizers or heavy metals. Professional who understands wallcovering use and installation
The manufacturing uses renewable energy, wind hydro and requirements.
Solar systems. A premixed heavy duty, clear vinyl adhesive should be used.
Do not dilute.
Surface finish
All qualities are precision trimmed and the drops can be
All qualities are stain repellent finished. This finish prevents oil butt jointed.
Or water based splashes penetrating and staining the material.
Any such splash will simply bead up on the surface and then, Installation instructions are supplied with every roll.
Providing it has not yet dried, can easily be removed by gentle
Blotting with an absorbent tissue or cloth. These wall materials are decorative products, not technical
Take care not to rub the surface as this may push any liquid into Products, and intended for interior use.
the material and create a stain. Once a stain has been allowed
to dry, it is virtually impossible to remove. Caution

Permeability After hanging 3 lengths of material, check for any defects.
If there is a problem contact your supplier immediately. No claims
A successful installation requires that walls are not subject to Can be considered if more than 3 lengths have been cut.
moisture accumulation restricting the escape of moisture and
Increasing the risk of mold growth. In this respect it is essential Maintenance
That the wallcovering has a good moisture permeability.
Permeability is a measure of the amount of water vapour (moisture) All the designs are stain repellent finished.
That can pass through a specified material in a certain amount of time. Periodic vacuuming is also recommended to prevent dust from
The degree of permeability is expressed in units referred to as Building up on the materials surface.
Perms. Materials with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with Delivery
Lower Perm values.
A copy of the test report as per ASTM E96-95, standard test for From stock by the full linear meter or linear yard.
water vapour transmission of mater, is available on request.
Specification Bradford Wool : 520
Fire classification Name 137 cm – 54” : 16.8
Width approx gr/lm : 65 %
ASTM E84 adhered Class A and Euroclass fire rated. Weight approx oz/lnyd : 35 %
Reports are available on request. wool : no
The Fire Rating should not be construed to indicate hazards Composition polyester : no
Presented under actual fire conditions. height
Repeat wide
Lightfastness random
Hanging
The test results as per I.S.O. 105B method 1, Heraeus original
Hanau Xenotest 150S, are minimum 5 on the standard blue scale
The test report is available on request.

Variations

These fabrics have been manufactured using mainly natural fibres.
Any slubs, impurities and irregularities in texture and colour
Are characteristic of these natural yarns and enhance the nature
Of the fabric and cannot be considered afault.
There can be a variation between the sample material and
The delivered product

Made in Holland 66/3

BRADFORD WOOL width 137 cm – 54”
66-1430

tapetex wall materials

66-1431 66-1432 66-1433

66-1434 66-1435 66-1436

66-1437 66-1438 66-1439

BRITTANY tapetex wall materials

BRITTANY tapetex wall materials

Sustainability Application

All dyeing, printing, laminating, finishing, etc., is totally water based. All wall materials must be installed by an experienced installation
The products do not contain PVC, plasticizers or heavy metals. Professional who understands wallcovering use and installation
The manufacturing uses renewable energy, wind hydro and requirements.
Solar systems. A premixed heavy duty, clear vinyl adhesive should be used.
Do not dilute.
Surface finish
All qualities are precision trimmed and the drops can be
All qualities are stain repellent finished. This finish prevents oil butt jointed.
Or water based splashes penetrating and staining the material.
Any such splash will simply bead up on the surface and then, Installation instructions are supplied with every roll.
Providing it has not yet dried, can easily be removed by gentle
Blotting with an absorbent tissue or cloth. These wall materials are decorative products, not technical
Take care not to rub the surface as this may push any liquid into Products, and intended for interior use.
the material and create a stain. Once a stain has been allowed
to dry, it is virtually impossible to remove. Caution

Permeability After hanging 3 lengths of material, check for any defects.
If there is a problem contact your supplier immediately. No claims
A successful installation requires that walls are not subject to Can be considered if more than 3 lengths have been cut.
moisture accumulation restricting the escape of moisture and
Increasing the risk of mold growth. In this respect it is essential Maintenance
That the wallcovering has a good moisture permeability.
Permeability is a measure of the amount of water vapour (moisture) All the designs are stain repellent finished.
That can pass through a specified material in a certain amount of time. Periodic vacuuming is also recommended to prevent dust from
The degree of permeability is expressed in units referred to as Building up on the materials surface.
Perms. Materials with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with Delivery
Lower Perm values.
A copy of the test report as per ASTM E96-95, standard test for From stock by the full linear meter or linear yard.
water vapour transmission of mater, is available on request.
Specification Brittany : 560
Fire classification Name 137 cm – 54” : 18.1
Width approx gr/lm : 35 %
ASTM E84 adhered Class A and Euroclass fire rated. Weight approx oz/lnyd : 65 %
Reports are available on request. linen : no
The Fire Rating should not be construed to indicate hazards Composition viscose : no
Presented under actual fire conditions. height
Repeat wide
Lightfastness random
Hanging
The test results as per I.S.O. 105B method 1, Heraeus original
Hanau Xenotest 150S, are minimum 5 on the standard blue scale
The test report is available on request.

Variations

These fabrics have been manufactured using mainly natural fibres.
Any slubs, impurities and irregularities in texture and colour
Are characteristic of these natural yarns and enhance the nature
Of the fabric and cannot be considered afault.
There can be a variation between the sample material and
The delivered product

Made in Holland 66/12

BRITTANY width 137 cm – 54”
66-1530

tapetex wall materials

66-1531 66-1532 66-1533

66-1534 66-1535 66-1536

66-1537 66-1538 66-1539

CRAFTY DEFORMATION tapetex wall materials

CRAFTY DEFORMATION tapetex wall materials

Sustainability Application

All dyeing, printing, laminating, finishing, etc., is totally water based. All wall materials must be installed by an experienced installation
The products do not contain PVC, plasticizers or heavy metals. Professional who understands wallcovering use and installation
The manufacturing uses renewable energy, wind hydro and requirements.
Solar systems. A premixed heavy duty, clear vinyl adhesive should be used.
Do not dilute.
Surface finish
All qualities are precision trimmed and the drops can be
All qualities are stain repellent finished. This finish prevents oil butt jointed.
Or water based splashes penetrating and staining the material.
Any such splash will simply bead up on the surface and then, Installation instructions are supplied with every roll.
Providing it has not yet dried, can easily be removed by gentle
Blotting with an absorbent tissue or cloth. These wall materials are decorative products, not technical
Take care not to rub the surface as this may push any liquid into Products, and intended for interior use.
the material and create a stain. Once a stain has been allowed
to dry, it is virtually impossible to remove. Caution

Permeability After hanging 3 lengths of material, check for any defects.
If there is a problem contact your supplier immediately. No claims
A successful installation requires that walls are not subject to Can be considered if more than 3 lengths have been cut.
moisture accumulation restricting the escape of moisture and
Increasing the risk of mold growth. In this respect it is essential Maintenance
That the wallcovering has a good moisture permeability.
Permeability is a measure of the amount of water vapour (moisture) All the designs are stain repellent finished.
That can pass through a specified material in a certain amount of time. Periodic vacuuming is also recommended to prevent dust from
The degree of permeability is expressed in units referred to as Building up on the materials surface.
Perms. Materials with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with Delivery
Lower Perm values.
A copy of the test report as per ASTM E96-95, standard test for From stock by the full linear meter or linear yard.
water vapour transmission of mater, is available on request.
Specification Crafty Deformation
Fire classification Name
Width approx 137 cm – 54”
ASTM E84 adhered Class A and Euroclass fire rated. Weight approx
Reports are available on request. gr/lm : 400
The Fire Rating should not be construed to indicate hazards Composition
Presented under actual fire conditions. oz/lnyd : 12.9
Repeat
Lightfastness linen : 90 %
Hanging
The test results as per I.S.O. 105B method 1, Heraeus original polyester : 10 %
Hanau Xenotest 150S, are minimum 5 on the standard blue scale
The test report is available on request. height : no

Variations wide : no

These fabrics have been manufactured using mainly natural fibres. random
Any slubs, impurities and irregularities in texture and colour
Are characteristic of these natural yarns and enhance the nature use a rubber roller in stead of
Of the fabric and cannot be considered afault.
There can be a variation between the sample material and a spatula
The delivered product

Made in Holland 66/9

CRAFTY DEFORMATION width 137 cm – 54”
66-1500

tapetex wall materials

66-1501 66-1502 66-1503

66-1504 66-1505 66-1506

66-1507 66-1508 66-1509

EVIAN LINEN tapetex wall materials

EVIAN LINEN tapetex wall materials

Sustainability Application

All dyeing, printing, laminating, finishing, etc., is totally water based. All wall materials must be installed by an experienced installation
The products do not contain PVC, plasticizers or heavy metals. Professional who understands wallcovering use and installation
The manufacturing uses renewable energy, wind hydro and requirements.
Solar systems. A premixed heavy duty, clear vinyl adhesive should be used.
Do not dilute.
Surface finish
All qualities are precision trimmed and the drops can be
All qualities are stain repellent finished. This finish prevents oil butt jointed.
Or water based splashes penetrating and staining the material.
Any such splash will simply bead up on the surface and then, Installation instructions are supplied with every roll.
Providing it has not yet dried, can easily be removed by gentle
Blotting with an absorbent tissue or cloth. These wall materials are decorative products, not technical
Take care not to rub the surface as this may push any liquid into Products, and intended for interior use.
the material and create a stain. Once a stain has been allowed
to dry, it is virtually impossible to remove. Caution

Permeability After hanging 3 lengths of material, check for any defects.
If there is a problem contact your supplier immediately. No claims
A successful installation requires that walls are not subject to Can be considered if more than 3 lengths have been cut.
moisture accumulation restricting the escape of moisture and
Increasing the risk of mold growth. In this respect it is essential Maintenance
That the wallcovering has a good moisture permeability.
Permeability is a measure of the amount of water vapour (moisture) All the designs are stain repellent finished.
That can pass through a specified material in a certain amount of time. Periodic vacuuming is also recommended to prevent dust from
The degree of permeability is expressed in units referred to as Building up on the materials surface.
Perms. Materials with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with Delivery
Lower Perm values.
A copy of the test report as per ASTM E96-95, standard test for From stock by the full linear meter or linear yard.
water vapour transmission of mater, is available on request.
Specification Evian Linen
Fire classification Name
Width approx 137 cm – 54”
ASTM E84 adhered Class A and Euroclass fire rated. Weight approx
Reports are available on request. gr/lm : 620
The Fire Rating should not be construed to indicate hazards Composition
Presented under actual fire conditions. Repeat oz/lnyd : 20.0

Lightfastness Hanging linen : 100 %

The test results as per I.S.O. 105B method 1, Heraeus original height : no
Hanau Xenotest 150S, are minimum 5 on the standard blue scale wide : no
The test report is available on request.
random
Variations
random non-reverse straight
These fabrics have been manufactured using mainly natural fibres.
Any slubs, impurities and irregularities in texture and colour
Are characteristic of these natural yarns and enhance the nature
Of the fabric and cannot be considered afault.
There can be a variation between the sample material and
The delivered product

Made in Holland 66/17

EVIAN LINEN width 137 cm – 54”
66-1580

tapetex wall materials

66-1581 66-1582

66-1583 66-1584

GRAPHIC SPIRIT tapetex wall materials

GRAPHIC SPIRIT tapetex wall materials

Sustainability Application

All dyeing, printing, laminating, finishing, etc., is totally water based. All wall materials must be installed by an experienced installation
The products do not contain PVC, plasticizers or heavy metals. Professional who understands wallcovering use and installation
The manufacturing uses renewable energy, wind hydro and requirements.
Solar systems. A premixed heavy duty, clear vinyl adhesive should be used.
Do not dilute.
Surface finish
All qualities are precision trimmed and the drops can be
All qualities are stain repellent finished. This finish prevents oil butt jointed.
Or water based splashes penetrating and staining the material.
Any such splash will simply bead up on the surface and then, This design requires a flat wall surface. this quality has a nap and
Providing it has not yet dried, can easily be removed by gentle should therefore be hung non-reverse straight or on repeat.
Blotting with an absorbent tissue or cloth. Installation instructions are supplied with every roll.
Take care not to rub the surface as this may push any liquid into
the material and create a stain. Once a stain has been allowed These wall materials are decorative products, not technical
to dry, it is virtually impossible to remove. Products, and intended for interior use.

Permeability Caution

A successful installation requires that walls are not subject to After hanging 3 lengths of material, check for any defects.
moisture accumulation restricting the escape of moisture and If there is a problem contact your supplier immediately. No claims
Increasing the risk of mold growth. In this respect it is essential Can be considered if more than 3 lengths have been cut.
That the wallcovering has a good moisture permeability.
Permeability is a measure of the amount of water vapour (moisture) Maintenance
That can pass through a specified material in a certain amount of time.
The degree of permeability is expressed in units referred to as All the designs are stain repellent finished.
Perms. Materials with high Perm levels, such as all qualities in this Periodic vacuuming is also recommended to prevent dust from
book, will allow more moisture to pass through than those with Building up on the materials surface.
Lower Perm values.
A copy of the test report as per ASTM E96-95, standard test for Delivery
water vapour transmission of mater, is available on request.
From stock by the full linear meter or linear yard.
Fire classification
Specification Graphic Spirit
ASTM E84 adhered Class A and Euroclass fire rated. Name
Reports are available on request. Width approx 137 cm – 54”
The Fire Rating should not be construed to indicate hazards Weight approx
Presented under actual fire conditions. gr/lm : 510
Composition
Lightfastness Repeat oz/lnyd : 16.4

The test results as per I.S.O. 105B method 1, Heraeus original Hanging polyester : 100 %
Hanau Xenotest 150S, are minimum 5 on the standard blue scale
The test report is available on request. height : 7.4cm-2.9”

Variations wide : 17.1cm-6.7”

As with real suede, this quality has a nap which can occasionally non-reverse on repeat
Produce a slight panelling effect.
Handling or touching changes the direction of the nap, but this
Can be eliminated by brushing the nap in the same direction,
With a soft clothes brush.
There can be a variation between the sample material and
The delivered product

Made in Holland 66/19

GRAPHIC SPIRIT width 137 cm – 54”
66-1610

tapetex wall materials

66-1611 66-1612

66-1613 66-1614

HEXAGON INSPIRATION tapetex wall materials

HEXAGON INSPIRATION tapetex wall materials

Sustainability Application

All dyeing, printing, laminating, finishing, etc., is totally water based. All wall materials must be installed by an experienced installation
The products do not contain PVC, plasticizers or heavy metals. Professional who understands wallcovering use and installation
The manufacturing uses renewable energy, wind hydro and requirements.
Solar systems. A premixed heavy duty, clear vinyl adhesive should be used.
Do not dilute.
Surface finish
All qualities are precision trimmed and the drops can be
All qualities are stain repellent finished. This finish prevents oil butt jointed.
Or water based splashes penetrating and staining the material.
Any such splash will simply bead up on the surface and then, Installation instructions are supplied with every roll.
Providing it has not yet dried, can easily be removed by gentle
Blotting with an absorbent tissue or cloth. These wall materials are decorative products, not technical
Take care not to rub the surface as this may push any liquid into Products, and intended for interior use.
the material and create a stain. Once a stain has been allowed
to dry, it is virtually impossible to remove. Caution

Permeability After hanging 3 lengths of material, check for any defects.
If there is a problem contact your supplier immediately. No claims
A successful installation requires that walls are not subject to Can be considered if more than 3 lengths have been cut.
moisture accumulation restricting the escape of moisture and
Increasing the risk of mold growth. In this respect it is essential Maintenance
That the wallcovering has a good moisture permeability.
Permeability is a measure of the amount of water vapour (moisture) All the designs are stain repellent finished.
That can pass through a specified material in a certain amount of time. Periodic vacuuming is also recommended to prevent dust from
The degree of permeability is expressed in units referred to as Building up on the materials surface.
Perms. Materials with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with Delivery
Lower Perm values.
A copy of the test report as per ASTM E96-95, standard test for From stock by the full linear meter or linear yard.
water vapour transmission of mater, is available on request.
Specification Hexagon inspiration
Fire classification Name
Width approx 137 cm – 54”
ASTM E84 adhered Class A and Euroclass fire rated. Weight approx
Reports are available on request. gr/lm : 460
The Fire Rating should not be construed to indicate hazards Composition
Presented under actual fire conditions. oz/lnyd : 14.8
Repeat
Lightfastness viscose : 90%
Hanging
The test results as per I.S.O. 105B method 1, Heraeus original polyester : 10%
Hanau Xenotest 150S, are minimum 5 on the standard blue scale
The test report is available on request. height : 21.1cm-8.3”

Variations wide : 19.5cm-7.7”

These fabrics have been manufactured using mainly natural fibres. random non-reverse
Any slubs, impurities and irregularities in texture and colour
Are characteristic of these natural yarns and enhance the nature direction of hanging is printed on back
Of the fabric and cannot be considered afault.
There can be a variation between the sample material and of wallcovering
The delivered product

Made in Holland 66/2

HEXAGON INSPIRATION width 137 cm – 54”
66-1420

tapetex wall materials

66-1421 66-1422 66-1423

66-1424 66-1425 66-1426

LUXURY COMPOSITION tapetex wall materials

LUXURY COMPOSITION tapetex wall materials

Sustainability Application

All dyeing, printing, laminating, finishing, etc., is totally water based. All wall materials must be installed by an experienced installation
The products do not contain PVC, plasticizers or heavy metals. Professional who understands wallcovering use and installation
The manufacturing uses renewable energy, wind hydro and requirements.
Solar systems. A premixed heavy duty, clear vinyl adhesive should be used.
Do not dilute.
Surface finish
All qualities are precision trimmed and the drops can be
All qualities are stain repellent finished. This finish prevents oil butt jointed.
Or water based splashes penetrating and staining the material.
Any such splash will simply bead up on the surface and then, Installation instructions are supplied with every roll.
Providing it has not yet dried, can easily be removed by gentle
Blotting with an absorbent tissue or cloth. These wall materials are decorative products, not technical
Take care not to rub the surface as this may push any liquid into Products, and intended for interior use.
the material and create a stain. Once a stain has been allowed
to dry, it is virtually impossible to remove. Caution

Permeability After hanging 3 lengths of material, check for any defects.
If there is a problem contact your supplier immediately. No claims
A successful installation requires that walls are not subject to Can be considered if more than 3 lengths have been cut.
moisture accumulation restricting the escape of moisture and
Increasing the risk of mold growth. In this respect it is essential Maintenance
That the wallcovering has a good moisture permeability.
Permeability is a measure of the amount of water vapour (moisture) All the designs are stain repellent finished.
That can pass through a specified material in a certain amount of time. Periodic vacuuming is also recommended to prevent dust from
The degree of permeability is expressed in units referred to as Building up on the materials surface.
Perms. Materials with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with Delivery
Lower Perm values.
A copy of the test report as per ASTM E96-95, standard test for From stock by the full linear meter or linear yard.
water vapour transmission of mater, is available on request.
Specification
Fire classification
Name Luxury Composition
ASTM E84 adhered Class A and Euroclass fire rated.
Reports are available on request. Width approx 137 cm – 54”
The Fire Rating should not be construed to indicate hazards
Presented under actual fire conditions. Weight approx gr/lm : 320

Lightfastness oz/lnyd : 10.3

The test results as per I.S.O. 105B method 1, Heraeus original Composition linen : 75%
Hanau Xenotest 150S, are minimum 5 on the standard blue scale
The test report is available on request. viscose : 10%

Variations polyester : 15%

These fabrics have been manufactured using mainly natural fibres. Repeat height : 13.3cm-5.2”
Any slubs, impurities and irregularities in texture and colour
Are characteristic of these natural yarns and enhance the nature wide : no
Of the fabric and cannot be considered afault.
There can be a variation between the sample material and Hanging random non-reverse straight
The delivered product
use a rubber roller in stead of
Made in Holland 66/7
a spatula

Matching colours in Venetian Heritage 66-1560/1566

LUXURY COMPOSITION width 137 cm – 54”
66-1470

tapetex wall materials

66-1471 66-1472 66-1473

66-1474 66-1475 66-1476

MECHANICAL WORKMANSHIP tapetex wall materials

MECHANICAL WORKMANSHIP tapetex wall materials

Sustainability Application

All dyeing, printing, laminating, finishing, etc., is totally water based. All wall materials must be installed by an experienced installation
The products do not contain PVC, plasticizers or heavy metals. Professional who understands wallcovering use and installation
The manufacturing uses renewable energy, wind hydro and requirements.
Solar systems. A premixed heavy duty, clear vinyl adhesive should be used.
Do not dilute.
Surface finish
All qualities are precision trimmed and the drops can be
All qualities are stain repellent finished. This finish prevents oil butt jointed.
Or water based splashes penetrating and staining the material.
Any such splash will simply bead up on the surface and then, Installation instructions are supplied with every roll.
Providing it has not yet dried, can easily be removed by gentle
Blotting with an absorbent tissue or cloth. These wall materials are decorative products, not technical
Take care not to rub the surface as this may push any liquid into Products, and intended for interior use.
the material and create a stain. Once a stain has been allowed
to dry, it is virtually impossible to remove. Caution

Permeability After hanging 3 lengths of material, check for any defects.
If there is a problem contact your supplier immediately. No claims
A successful installation requires that walls are not subject to Can be considered if more than 3 lengths have been cut.
moisture accumulation restricting the escape of moisture and
Increasing the risk of mold growth. In this respect it is essential Maintenance
That the wallcovering has a good moisture permeability.
Permeability is a measure of the amount of water vapour (moisture) All the designs are stain repellent finished.
That can pass through a specified material in a certain amount of time. Periodic vacuuming is also recommended to prevent dust from
The degree of permeability is expressed in units referred to as Building up on the materials surface.
Perms. Materials with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with Delivery
Lower Perm values.
A copy of the test report as per ASTM E96-95, standard test for From stock by the full linear meter or linear yard.
water vapour transmission of mater, is available on request.
Specification Mechanical Workmanship
Fire classification Name
Width approx 137 cm – 54”
ASTM E84 adhered Class A and Euroclass fire rated. Weight approx
Reports are available on request. gr/lm : 400
The Fire Rating should not be construed to indicate hazards Composition
Presented under actual fire conditions. Repeat oz/lnyd : 12.9

Lightfastness Hanging linen : 100%

The test results as per I.S.O. 105B method 1, Heraeus original height : 16.0cm-6.3”
Hanau Xenotest 150S, are minimum 5 on the standard blue scale
The test report is available on request. wide : 34.0cm-13.4”

Variations non-reverse on repeat

These fabrics have been manufactured using mainly natural fibres. use a rubber roller in stead of
Any slubs, impurities and irregularities in texture and colour
Are characteristic of these natural yarns and enhance the nature a spatula
Of the fabric and cannot be considered afault.
There can be a variation between the sample material and
The delivered product

Made in Holland 66/10

MECHANICAL WORKMANSHIP width 137 cm – 54”
661510

tapetex wall materials

661511 661512 661513

661514 661515 661516

661517 661518 661519

NORMANDY tapetex wall materials

NORMANDY tapetex wall materials

Sustainability Application

All dyeing, printing, laminating, finishing, etc., is totally water based. All wall materials must be installed by an experienced installation
The products do not contain PVC, plasticizers or heavy metals. Professional who understands wallcovering use and installation
The manufacturing uses renewable energy, wind hydro and requirements.
Solar systems. A premixed heavy duty, clear vinyl adhesive should be used.
Do not dilute.
Surface finish
All qualities are precision trimmed and the drops can be
All qualities are stain repellent finished. This finish prevents oil butt jointed.
Or water based splashes penetrating and staining the material.
Any such splash will simply bead up on the surface and then, Installation instructions are supplied with every roll.
Providing it has not yet dried, can easily be removed by gentle
Blotting with an absorbent tissue or cloth. These wall materials are decorative products, not technical
Take care not to rub the surface as this may push any liquid into Products, and intended for interior use.
the material and create a stain. Once a stain has been allowed
to dry, it is virtually impossible to remove. Caution

Permeability After hanging 3 lengths of material, check for any defects.
If there is a problem contact your supplier immediately. No claims
A successful installation requires that walls are not subject to Can be considered if more than 3 lengths have been cut.
moisture accumulation restricting the escape of moisture and
Increasing the risk of mold growth. In this respect it is essential Maintenance
That the wallcovering has a good moisture permeability.
Permeability is a measure of the amount of water vapour (moisture) All the designs are stain repellent finished.
That can pass through a specified material in a certain amount of time. Periodic vacuuming is also recommended to prevent dust from
The degree of permeability is expressed in units referred to as Building up on the materials surface.
Perms. Materials with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with Delivery
Lower Perm values.
A copy of the test report as per ASTM E96-95, standard test for From stock by the full linear meter or linear yard.
water vapour transmission of mater, is available on request.
Specification Normandy : 560
Fire classification Name 137 cm – 54” : 18.1
Width approx gr/lm : 35%
ASTM E84 adhered Class A and Euroclass fire rated. Weight approx oz/lnyd : 65%
Reports are available on request. linen : no
The Fire Rating should not be construed to indicate hazards Composition viscose : no
Presented under actual fire conditions. height
Repeat wide
Lightfastness random
Hanging
The test results as per I.S.O. 105B method 1, Heraeus original
Hanau Xenotest 150S, are minimum 5 on the standard blue scale
The test report is available on request.

Variations

These fabrics have been manufactured using mainly natural fibres.
Any slubs, impurities and irregularities in texture and colour
Are characteristic of these natural yarns and enhance the nature
Of the fabric and cannot be considered afault.
There can be a variation between the sample material and
The delivered product

Made in Holland 66/8

NORMANDY width 137 cm – 54”
66-1480

tapetex wall materials

66-1481 66-1482 66-1483

66-1484 66-1485 66-1486