TAPETEX 66

ORISSA SILK tapetex wall materials

ORISSA SILK tapetex wall materials
Sustainability
Application
All dyeing, printing, laminating, finishing, etc., is totally water based.
The products do not contain PVC, plasticizers or heavy metals. All wall materials must be installed by an experienced installation
The manufacturing uses renewable energy, wind hydro and Professional who understands wallcovering use and installation
Solar systems. requirements.
A premixed heavy duty, clear vinyl adhesive should be used.
Surface finish Do not dilute.

All qualities are stain repellent finished. This finish prevents oil All qualities are precision trimmed and the drops can be
Or water based splashes penetrating and staining the material. butt jointed.
Any such splash will simply bead up on the surface and then,
Providing it has not yet dried, can easily be removed by gentle To obtain a balanced effect across the wall, it is advisable
Blotting with an absorbent tissue or cloth. To cut and arrange all the drops for one wall, prior hanging.
Take care not to rub the surface as this may push any liquid into Non-reverse hang unless otherwise stated on the roll.
the material and create a stain. Once a stain has been allowed Installation instructions are supplied with every roll.
to dry, it is virtually impossible to remove. These wall materials are decorative products, not technical
Products, and intended for interior use.
Permeability
Caution
A successful installation requires that walls are not subject to
moisture accumulation restricting the escape of moisture and After hanging 3 lengths of material, check for any defects.
Increasing the risk of mold growth. In this respect it is essential If there is a problem contact your supplier immediately. No claims
That the wallcovering has a good moisture permeability. Can be considered if more than 3 lengths have been cut.
Permeability is a measure of the amount of water vapour (moisture)
That can pass through a specified material in a certain amount of time. Maintenance
The degree of permeability is expressed in units referred to as
Perms. Materials with high Perm levels, such as all qualities in this All the designs are stain repellent finished.
book, will allow more moisture to pass through than those with Periodic vacuuming is also recommended to prevent dust from
Lower Perm values. Building up on the materials surface.
A copy of the test report as per ASTM E96-95, standard test for
water vapour transmission of mater, is available on request. Delivery

Fire classification From stock by the full linear meter or linear yard.

ASTM E84 adhered Class A and Euroclass fire rated. Specification Orissa Silk
Reports are available on request. Name
The Fire Rating should not be construed to indicate hazards Width approx 110 cm – 43”
Presented under actual fire conditions. Weight approx
gr/lm : 300
Lightfastness Composition
oz/inyd : 9.7
The test results as per I.S.O. 105B method 1, Heraeus original Repeat
Hanau Xenotest 150S, are minimum 5 on the standard blue scale silk : 90 %
The test report is available on request. Hanging
polyester : 10 %
Variations
height : No
The Silk designs are hand woven from homespun and hand dyed
Silk. As such, there may be stronger impurities and irregularities wide : No
In colour and texture within the roll and between the different rolls
Even if from one lot. This, together with the horizontal weave, random non-reverse straight
will create a pleasant panelling effect on the wall. These variations
are characterisiic of these natural fabric and enhance the nature
Of fabric and cannot be considered a fault.
There can be a variation between the sample material and
The delivered product.

Made in Holland 66/11

ORISSA SILK width 110 cm – 43”
66-1520

tapetex wall materials

66-1521 66-1522 66-1523

66-1524 66-1525 66-1526

66-1527 66-1528 66-1529

PICARDY tapetex wall materials

PICARDY tapetex wall materials

Sustainability Application

All dyeing, printing, laminating, finishing, etc., is totally water based. All wall materials must be installed by an experienced installation
The products do not contain PVC, plasticizers or heavy metals. Professional who understands wallcovering use and installation
The manufacturing uses renewable energy, wind hydro and requirements.
Solar systems. A premixed heavy duty, clear vinyl adhesive should be used.
Do not dilute.
Surface finish
All qualities are precision trimmed and the drops can be
All qualities are stain repellent finished. This finish prevents oil butt jointed.
Or water based splashes penetrating and staining the material.
Any such splash will simply bead up on the surface and then, Installation instructions are supplied with every roll.
Providing it has not yet dried, can easily be removed by gentle
Blotting with an absorbent tissue or cloth. These wall materials are decorative products, not technical
Take care not to rub the surface as this may push any liquid into Products, and intended for interior use.
the material and create a stain. Once a stain has been allowed
to dry, it is virtually impossible to remove. Caution

Permeability After hanging 3 lengths of material, check for any defects.
If there is a problem contact your supplier immediately. No claims
A successful installation requires that walls are not subject to Can be considered if more than 3 lengths have been cut.
moisture accumulation restricting the escape of moisture and
Increasing the risk of mold growth. In this respect it is essential Maintenance
That the wallcovering has a good moisture permeability.
Permeability is a measure of the amount of water vapour (moisture) All the designs are stain repellent finished.
That can pass through a specified material in a certain amount of time. Periodic vacuuming is also recommended to prevent dust from
The degree of permeability is expressed in units referred to as Building up on the materials surface.
Perms. Materials with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with Delivery
Lower Perm values.
A copy of the test report as per ASTM E96-95, standard test for From stock by the full linear meter or linear yard.
water vapour transmission of mater, is available on request.
Specification Picardy : 530
Fire classification Name 137 cm – 54” : 17.1
Width approx gr/lm : 55%
ASTM E84 adhered Class A and Euroclass fire rated. Weight approx oz/lnyd : 45%
Reports are available on request. cotton : no
The Fire Rating should not be construed to indicate hazards Composition viscose : no
Presented under actual fire conditions. height
Repeat wide
Lightfastness random
Hanging
The test results as per I.S.O. 105B method 1, Heraeus original
Hanau Xenotest 150S, are minimum 5 on the standard blue scale
The test report is available on request.

Variations

These fabrics have been manufactured using mainly natural fibres.
Any slubs, impurities and irregularities in texture and colour
Are characteristic of these natural yarns and enhance the nature
Of the fabric and cannot be considered afault.
There can be a variation between the sample material and
The delivered product

Made in Holland 66/14

PICARDY width 137 cm – 54”
66-1550

tapetex wall materials

66-1551 66-1552 66-1553

66-1554 66-1555 66-1556

POWERFULL CONNECTIONS tapetex wall materials

POWERFULL CONNECTIONS tapetex wall materials

Sustainability Application

All dyeing, printing, laminating, finishing, etc., is totally water based. All wall materials must be installed by an experienced installation
The products do not contain PVC, plasticizers or heavy metals. Professional who understands wallcovering use and installation
The manufacturing uses renewable energy, wind hydro and requirements.
Solar systems. A premixed heavy duty, clear vinyl adhesive should be used.
Do not dilute.
Surface finish
All qualities are precision trimmed and the drops can be
All qualities are stain repellent finished. This finish prevents oil butt jointed.
Or water based splashes penetrating and staining the material.
Any such splash will simply bead up on the surface and then, This design requires a flat wall surface. this quality has a nap and
Providing it has not yet dried, can easily be removed by gentle should therefore be hung non-reverse straight or on repeat.
Blotting with an absorbent tissue or cloth. Installation instructions are supplied with every roll.
Take care not to rub the surface as this may push any liquid into
the material and create a stain. Once a stain has been allowed These wall materials are decorative products, not technical
to dry, it is virtually impossible to remove. Products, and intended for interior use.

Permeability Caution

A successful installation requires that walls are not subject to After hanging 3 lengths of material, check for any defects.
moisture accumulation restricting the escape of moisture and If there is a problem contact your supplier immediately. No claims
Increasing the risk of mold growth. In this respect it is essential Can be considered if more than 3 lengths have been cut.
That the wallcovering has a good moisture permeability.
Permeability is a measure of the amount of water vapour (moisture) Maintenance
That can pass through a specified material in a certain amount of time.
The degree of permeability is expressed in units referred to as All the designs are stain repellent finished.
Perms. Materials with high Perm levels, such as all qualities in this Periodic vacuuming is also recommended to prevent dust from
book, will allow more moisture to pass through than those with Building up on the materials surface.
Lower Perm values.
A copy of the test report as per ASTM E96-95, standard test for Delivery
water vapour transmission of mater, is available on request.
From stock by the full linear meter or linear yard.
Fire classification
Specification Powerfull Connections
ASTM E84 adhered Class A and Euroclass fire rated. Name
Reports are available on request. Width approx 137 cm – 54”
The Fire Rating should not be construed to indicate hazards Weight approx
Presented under actual fire conditions. gr/lm : 510
Composition
Lightfastness Repeat oz/lnyd : 16.4

The test results as per I.S.O. 105B method 1, Heraeus original Hanging polyester : 100 %
Hanau Xenotest 150S, are minimum 5 on the standard blue scale
The test report is available on request. height : 6.2cm-2.4”

Variations wide : 6.2cm-2.4”

As with real suede, this quality has a nap which can occasionally non-reverse on repeat
Produce a slight panelling effect.
Handling or touching changes the direction of the nap, but this
Can be eliminated by brushing the nap in the same direction,
With a soft clothes brush.
There can be a variation between the sample material and
The delivered product

Made in Holland 66/21

POWERFULL CONNECTIONS width 137 cm – 54”
66-1630

tapetex wall materials

66-1631 66-1632

66-1633 66-1634

RAFFIA DECOR tapetex wall materials

RAFFIA DECOR tapetex wall materials

Sustainability Application

All dyeing, printing, laminating, finishing, etc., is totally water based. All wall materials must be installed by an experienced installation
The products do not contain PVC, plasticizers or heavy metals. Professional who understands wallcovering use and installation
The manufacturing uses renewable energy, wind hydro and requirements.
Solar systems. A premixed heavy duty, clear vinyl adhesive should be used.
Do not dilute.
Surface finish
All qualities are precision trimmed and the drops can be
All qualities are stain repellent finished. This finish prevents oil butt jointed.
Or water based splashes penetrating and staining the material.
Any such splash will simply bead up on the surface and then, Installation instructions are supplied with every roll.
Providing it has not yet dried, can easily be removed by gentle
Blotting with an absorbent tissue or cloth. These wall materials are decorative products, not technical
Take care not to rub the surface as this may push any liquid into Products, and intended for interior use.
the material and create a stain. Once a stain has been allowed
to dry, it is virtually impossible to remove. Caution

Permeability After hanging 3 lengths of material, check for any defects.
If there is a problem contact your supplier immediately. No claims
A successful installation requires that walls are not subject to Can be considered if more than 3 lengths have been cut.
moisture accumulation restricting the escape of moisture and
Increasing the risk of mold growth. In this respect it is essential Maintenance
That the wallcovering has a good moisture permeability.
Permeability is a measure of the amount of water vapour (moisture) All the designs are stain repellent finished.
That can pass through a specified material in a certain amount of time. Periodic vacuuming is also recommended to prevent dust from
The degree of permeability is expressed in units referred to as Building up on the materials surface.
Perms. Materials with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with Delivery
Lower Perm values.
A copy of the test report as per ASTM E96-95, standard test for From stock by the full linear meter or linear yard.
water vapour transmission of mater, is available on request.
Specification Raffia Decor : 550
Fire classification Name 137 cm – 54” : 17.7
Width approx gr/lm : 45%
ASTM E84 adhered Class A and Euroclass fire rated. Weight approx oz/lnyd : 55%
Reports are available on request. linen : no
The Fire Rating should not be construed to indicate hazards Composition polyester : no
Presented under actual fire conditions. height
Repeat wide
Lightfastness random
Hanging
The test results as per I.S.O. 105B method 1, Heraeus original
Hanau Xenotest 150S, are minimum 5 on the standard blue scale
The test report is available on request.

Variations

These fabrics have been manufactured using mainly natural fibres.
Any slubs, impurities and irregularities in texture and colour
Are characteristic of these natural yarns and enhance the nature
Of the fabric and cannot be considered afault.
There can be a variation between the sample material and
The delivered product

Made in Holland 66/6

RAFFIA DÉCOR width 137 cm – 54”
66-1460

tapetex wall materials

66-1461 66-1462 66-1463

66-1464 66-1465 66-1466

66-1467 66-1468 66-1469

RELIEF REPETITION tapetex wall materials

RELIEF REPETITION tapetex wall materials

Sustainability Application

All dyeing, printing, laminating, finishing, etc., is totally water based. All wall materials must be installed by an experienced installation
The products do not contain PVC, plasticizers or heavy metals. Professional who understands wallcovering use and installation
The manufacturing uses renewable energy, wind hydro and requirements.
Solar systems. A premixed heavy duty, clear vinyl adhesive should be used.
Do not dilute.
Surface finish
All qualities are precision trimmed and the drops can be
All qualities are stain repellent finished. This finish prevents oil butt jointed.
Or water based splashes penetrating and staining the material.
Any such splash will simply bead up on the surface and then, Installation instructions are supplied with every roll.
Providing it has not yet dried, can easily be removed by gentle
Blotting with an absorbent tissue or cloth. These wall materials are decorative products, not technical
Take care not to rub the surface as this may push any liquid into Products, and intended for interior use.
the material and create a stain. Once a stain has been allowed
to dry, it is virtually impossible to remove. Caution

Permeability After hanging 3 lengths of material, check for any defects.
If there is a problem contact your supplier immediately. No claims
A successful installation requires that walls are not subject to Can be considered if more than 3 lengths have been cut.
moisture accumulation restricting the escape of moisture and
Increasing the risk of mold growth. In this respect it is essential Maintenance
That the wallcovering has a good moisture permeability.
Permeability is a measure of the amount of water vapour (moisture) All the designs are stain repellent finished.
That can pass through a specified material in a certain amount of time. Periodic vacuuming is also recommended to prevent dust from
The degree of permeability is expressed in units referred to as Building up on the materials surface.
Perms. Materials with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with Delivery
Lower Perm values.
A copy of the test report as per ASTM E96-95, standard test for From stock by the full linear meter or linear yard.
water vapour transmission of mater, is available on request.
Specification Relief Repetition
Fire classification Name
Width approx 137 cm – 54”
ASTM E84 adhered Class A and Euroclass fire rated. Weight approx
Reports are available on request. gr/lm : 380
The Fire Rating should not be construed to indicate hazards Composition
Presented under actual fire conditions. oz/lnyd : 12.3
Repeat
Lightfastness linen : 95%
Hanging
The test results as per I.S.O. 105B method 1, Heraeus original polyester :5%
Hanau Xenotest 150S, are minimum 5 on the standard blue scale
The test report is available on request. height : 21.4cm-8.4”

Variations wide : 7.6cm-3.0”

These fabrics have been manufactured using mainly natural fibres. non-reverse on repepeat
Any slubs, impurities and irregularities in texture and colour
Are characteristic of these natural yarns and enhance the nature use a rubber roller in stead of spatula
Of the fabric and cannot be considered afault.
There can be a variation between the sample material and
The delivered product

Made in Holland 66/13

RELIEF REPETITION width 137 cm – 54”
66-1540

tapetex wall materials

66-1541 66-1542 66-1543

66-1544 66-1545 66-1546

66-1547 66-1548 66-1549

SMOOTH SHEEN tapetex wall materials

SMOOTH SHEEN tapetex wall materials

Sustainability Application

All dyeing, printing, laminating, finishing, etc., is totally water based. All wall materials must be installed by an experienced installation
The products do not contain PVC, plasticizers or heavy metals. Professional who understands wallcovering use and installation
The manufacturing uses renewable energy, wind hydro and requirements.
Solar systems. A premixed heavy duty, clear vinyl adhesive should be used.
Do not dilute.
Surface finish
All qualities are precision trimmed and the drops can be
All qualities are stain repellent finished. This finish prevents oil butt jointed.
Or water based splashes penetrating and staining the material.
Any such splash will simply bead up on the surface and then, Installation instructions are supplied with every roll.
Providing it has not yet dried, can easily be removed by gentle
Blotting with an absorbent tissue or cloth. These wall materials are decorative products, not technical
Take care not to rub the surface as this may push any liquid into Products, and intended for interior use.
the material and create a stain. Once a stain has been allowed
to dry, it is virtually impossible to remove. Caution

Permeability After hanging 3 lengths of material, check for any defects.
If there is a problem contact your supplier immediately. No claims
A successful installation requires that walls are not subject to Can be considered if more than 3 lengths have been cut.
moisture accumulation restricting the escape of moisture and
Increasing the risk of mold growth. In this respect it is essential Maintenance
That the wallcovering has a good moisture permeability.
Permeability is a measure of the amount of water vapour (moisture) All the designs are stain repellent finished.
That can pass through a specified material in a certain amount of time. Periodic vacuuming is also recommended to prevent dust from
The degree of permeability is expressed in units referred to as Building up on the materials surface.
Perms. Materials with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with Delivery
Lower Perm values.
A copy of the test report as per ASTM E96-95, standard test for From stock by the full linear meter or linear yard.
water vapour transmission of mater, is available on request.
Specification Smooth Sheen : 620
Fire classification Name 137 cm – 54” : 20.0
Width approx gr/lm : 30%
ASTM E84 adhered Class A and Euroclass fire rated. Weight approx oz/lnyd : 70 %
Reports are available on request. cotton : no
The Fire Rating should not be construed to indicate hazards Composition polyester : 17.1cm-6.7”
Presented under actual fire conditions. height
Repeat wide
Lightfastness random
Hanging
The test results as per I.S.O. 105B method 1, Heraeus original
Hanau Xenotest 150S, are minimum 5 on the standard blue scale
The test report is available on request.

Variations

These fabrics have been manufactured using mainly natural fibres.
Any slubs, impurities and irregularities in texture and colour
Are characteristic of these natural yarns and enhance the nature
Of the fabric and cannot be considered afault.
There can be a variation between the sample material and
The delivered product

Made in Holland 66/1

SMOOTH SHEEN width 137 cm – 54”
66-1410

tapetex wall materials

66-1411 66-1412 66-1413

66-1414 66-1415 66-1416

TECH INSPIRATIONS tapetex wall materials

TECH INSPIRATIONS tapetex wall materials

Sustainability Application

All dyeing, printing, laminating, finishing, etc., is totally water based. All wall materials must be installed by an experienced installation
The products do not contain PVC, plasticizers or heavy metals. Professional who understands wallcovering use and installation
The manufacturing uses renewable energy, wind hydro and requirements.
Solar systems. A premixed heavy duty, clear vinyl adhesive should be used.
Do not dilute.
Surface finish
All qualities are precision trimmed and the drops can be
All qualities are stain repellent finished. This finish prevents oil butt jointed.
Or water based splashes penetrating and staining the material.
Any such splash will simply bead up on the surface and then, Installation instructions are supplied with every roll.
Providing it has not yet dried, can easily be removed by gentle
Blotting with an absorbent tissue or cloth. These wall materials are decorative products, not technical
Take care not to rub the surface as this may push any liquid into Products, and intended for interior use.
the material and create a stain. Once a stain has been allowed
to dry, it is virtually impossible to remove. Caution

Permeability After hanging 3 lengths of material, check for any defects.
If there is a problem contact your supplier immediately. No claims
A successful installation requires that walls are not subject to Can be considered if more than 3 lengths have been cut.
moisture accumulation restricting the escape of moisture and
Increasing the risk of mold growth. In this respect it is essential Maintenance
That the wallcovering has a good moisture permeability.
Permeability is a measure of the amount of water vapour (moisture) All the designs are stain repellent finished.
That can pass through a specified material in a certain amount of time. Periodic vacuuming is also recommended to prevent dust from
The degree of permeability is expressed in units referred to as Building up on the materials surface.
Perms. Materials with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with Delivery
Lower Perm values.
A copy of the test report as per ASTM E96-95, standard test for From stock by the full linear meter or linear yard.
water vapour transmission of mater, is available on request.
Specification Tech inspirations
Fire classification Name
Width approx 137 cm – 54”
ASTM E84 adhered Class A and Euroclass fire rated. Weight approx
Reports are available on request. gr/lm : 600
The Fire Rating should not be construed to indicate hazards Composition
Presented under actual fire conditions. Repeat oz/lnyd : 19.3

Lightfastness Hanging linen : 100%

The test results as per I.S.O. 105B method 1, Heraeus original height : 50.0cm-19.7”
Hanau Xenotest 150S, are minimum 5 on the standard blue scale
The test report is available on request. wide : 68.0cm-26.8”

Variations non-reverse on repeat

These fabrics have been manufactured using mainly natural fibres. use a rubber roller in stead of a spatula
Any slubs, impurities and irregularities in texture and colour
Are characteristic of these natural yarns and enhance the nature
Of the fabric and cannot be considered afault.
There can be a variation between the sample material and
The delivered product

Made in Holland 66/18

TECH INSPIRATIONS width 137 cm – 54”
66-1600

tapetex wall materials

66-1601 66-1602 66-1603

66-1604 66-1605 66-1606

VENETIAN HERITAGE tapetex wall materials

VENETIAN HERITAGE tapetex wall materials

Sustainability Application

All dyeing, printing, laminating, finishing, etc., is totally water based. All wall materials must be installed by an experienced installation
The products do not contain PVC, plasticizers or heavy metals. Professional who understands wallcovering use and installation
The manufacturing uses renewable energy, wind hydro and requirements.
Solar systems. A premixed heavy duty, clear vinyl adhesive should be used.
Do not dilute.
Surface finish
All qualities are precision trimmed and the drops can be
All qualities are stain repellent finished. This finish prevents oil butt jointed.
Or water based splashes penetrating and staining the material.
Any such splash will simply bead up on the surface and then, Installation instructions are supplied with every roll.
Providing it has not yet dried, can easily be removed by gentle
Blotting with an absorbent tissue or cloth. These wall materials are decorative products, not technical
Take care not to rub the surface as this may push any liquid into Products, and intended for interior use.
the material and create a stain. Once a stain has been allowed
to dry, it is virtually impossible to remove. Caution

Permeability After hanging 3 lengths of material, check for any defects.
If there is a problem contact your supplier immediately. No claims
A successful installation requires that walls are not subject to Can be considered if more than 3 lengths have been cut.
moisture accumulation restricting the escape of moisture and
Increasing the risk of mold growth. In this respect it is essential Maintenance
That the wallcovering has a good moisture permeability.
Permeability is a measure of the amount of water vapour (moisture) All the designs are stain repellent finished.
That can pass through a specified material in a certain amount of time. Periodic vacuuming is also recommended to prevent dust from
The degree of permeability is expressed in units referred to as Building up on the materials surface.
Perms. Materials with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with Delivery
Lower Perm values.
A copy of the test report as per ASTM E96-95, standard test for From stock by the full linear meter or linear yard.
water vapour transmission of mater, is available on request.
Specification
Fire classification
Name Venetian Heritage
ASTM E84 adhered Class A and Euroclass fire rated.
Reports are available on request. Width approx 137 cm – 54”
The Fire Rating should not be construed to indicate hazards
Presented under actual fire conditions. Weight approx gr/lm : 320

Lightfastness oz/lnyd : 10.3

The test results as per I.S.O. 105B method 1, Heraeus original Composition linen : 75%
Hanau Xenotest 150S, are minimum 5 on the standard blue scale
The test report is available on request. viscose : 10%

Variations polyester : 15%

These fabrics have been manufactured using mainly natural fibres. Repeat height : 50.0cm-19.7”
Any slubs, impurities and irregularities in texture and colour
Are characteristic of these natural yarns and enhance the nature wide : 34.0cm-13.4”
Of the fabric and cannot be considered afault.
There can be a variation between the sample material and Hanging non-reverse on repeat
The delivered product
use a rubber roller in stead of a spatula

direction of hanging is printed on back

of wallcovering

Matching colours in Luxury Composition 66-1470/1476.

Made in Holland 66/15

VENETIAN HERITAGE width 137 cm – 54”
66-1560

tapetex wall materials

66-1561 66-1562 66-1563

66-1564 66-1565 66-1566

VENETO tapetex wall materials

VENETO tapetex wall materials

Sustainability Application

All dyeing, printing, laminating, finishing, etc., is totally water based. All wall materials must be installed by an experienced installation
The products do not contain PVC, plasticizers or heavy metals. Professional who understands wallcovering use and installation
The manufacturing uses renewable energy, wind hydro and requirements.
Solar systems. A premixed heavy duty, clear vinyl adhesive should be used.
Do not dilute.
Surface finish
All qualities are precision trimmed and the drops can be
All qualities are stain repellent finished. This finish prevents oil butt jointed.
Or water based splashes penetrating and staining the material.
Any such splash will simply bead up on the surface and then, This design requires a flat wall surface. this quality has a nap and
Providing it has not yet dried, can easily be removed by gentle should therefore be hung non-reverse straight or on repeat.
Blotting with an absorbent tissue or cloth. Installation instructions are supplied with every roll.
Take care not to rub the surface as this may push any liquid into
the material and create a stain. Once a stain has been allowed These wall materials are decorative products, not technical
to dry, it is virtually impossible to remove. Products, and intended for interior use.

Permeability Caution

A successful installation requires that walls are not subject to After hanging 3 lengths of material, check for any defects.
moisture accumulation restricting the escape of moisture and If there is a problem contact your supplier immediately. No claims
Increasing the risk of mold growth. In this respect it is essential Can be considered if more than 3 lengths have been cut.
That the wallcovering has a good moisture permeability.
Permeability is a measure of the amount of water vapour (moisture) Maintenance
That can pass through a specified material in a certain amount of time.
The degree of permeability is expressed in units referred to as All the designs are stain repellent finished.
Perms. Materials with high Perm levels, such as all qualities in this Periodic vacuuming is also recommended to prevent dust from
book, will allow more moisture to pass through than those with Building up on the materials surface.
Lower Perm values.
A copy of the test report as per ASTM E96-95, standard test for Delivery
water vapour transmission of mater, is available on request.
From stock by the full linear meter or linear yard.
Fire classification
Specification Veneto
ASTM E84 adhered Class A and Euroclass fire rated. Name
Reports are available on request. Width approx 137 cm – 54”
The Fire Rating should not be construed to indicate hazards Weight approx
Presented under actual fire conditions. gr/lm : 470
Composition oz/lnyd : 15.2
Lightfastness Repeat
polyester : 100 %
The test results as per I.S.O. 105B method 1, Heraeus original Hanging
Hanau Xenotest 150S, are minimum 5 on the standard blue scale height : no
The test report is available on request.
wide : no
Variations
random non-reverse straight
As with real suede, this quality has a nap which can occasionally
Produce a slight panelling effect.
Handling or touching changes the direction of the nap, but this
Can be eliminated by brushing the nap in the same direction,
With a soft clothes brush.
There can be a variation between the sample material and
The delivered product

Made in Holland 66/22

VENETO width 137 cm – 54”
66-1640

tapetex wall materials

66-1641 66-1642 66-1643

66-1644 66-1645 66-1646

66-1647 66-1648 66-1649

VENTURA tapetex wall materials

VENTURA tapetex wall materials

Sustainability Application

All dyeing, printing, laminating, finishing, etc., is totally water based. All wall materials must be installed by an experienced installation
The products do not contain PVC, plasticizers or heavy metals. Professional who understands wallcovering use and installation
The manufacturing uses renewable energy, wind hydro and requirements.
Solar systems. A premixed heavy duty, clear vinyl adhesive should be used.
Do not dilute.
Surface finish
All qualities are precision trimmed and the drops can be
All qualities are stain repellent finished. This finish prevents oil butt jointed.
Or water based splashes penetrating and staining the material.
Any such splash will simply bead up on the surface and then, Installation instructions are supplied with every roll.
Providing it has not yet dried, can easily be removed by gentle
Blotting with an absorbent tissue or cloth. These wall materials are decorative products, not technical
Take care not to rub the surface as this may push any liquid into Products, and intended for interior use.
the material and create a stain. Once a stain has been allowed
to dry, it is virtually impossible to remove. Caution

Permeability After hanging 3 lengths of material, check for any defects.
If there is a problem contact your supplier immediately. No claims
A successful installation requires that walls are not subject to Can be considered if more than 3 lengths have been cut.
moisture accumulation restricting the escape of moisture and
Increasing the risk of mold growth. In this respect it is essential Maintenance
That the wallcovering has a good moisture permeability.
Permeability is a measure of the amount of water vapour (moisture) All the designs are stain repellent finished.
That can pass through a specified material in a certain amount of time. Periodic vacuuming is also recommended to prevent dust from
The degree of permeability is expressed in units referred to as Building up on the materials surface.
Perms. Materials with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with Delivery
Lower Perm values.
A copy of the test report as per ASTM E96-95, standard test for From stock by the full linear meter or linear yard.
water vapour transmission of mater, is available on request.
Specification Ventura
Fire classification Name
Width approx 137 cm – 54”
ASTM E84 adhered Class A and Euroclass fire rated. Weight approx
Reports are available on request. gr/lm : 440
The Fire Rating should not be construed to indicate hazards Composition
Presented under actual fire conditions. oz/lnyd : 14.2
Repeat
Lightfastness cotton : 20%
Hanging
The test results as per I.S.O. 105B method 1, Heraeus original viscose : 70%
Hanau Xenotest 150S, are minimum 5 on the standard blue scale
The test report is available on request. polyester : 10%

Variations height : no

These fabrics have been manufactured using mainly natural fibres. wide : no
Any slubs, impurities and irregularities in texture and colour
Are characteristic of these natural yarns and enhance the nature random non-reverse on straight
Of the fabric and cannot be considered afault.
There can be a variation between the sample material and
The delivered product

Made in Holland 66/5

VENTURA width 137 cm – 54”
66-1450

tapetex wall materials

66-1451 66-1452 66-1453

66-1454 66-1455 66-1456

66-1457 66-1458 66-1459