TAPETEX 67

67

nonwoven



BORA tapetex wall materials

BORA TAPETEX wall materials

Sustainability Application
All nonwovens are made out FSC certified woodpulp, FSC A000531, reinforced All wallcoverings must be installed by experienced installation professionals who
with polyester for dimensional stability. In production all energy sources are understand wallcovering use and installation requirements for textile wallcovering.
green, solar, wind or hydro based, and all processes are water based. The
products do not contain PVC, chlorine, plasticizers, heavy metals or harmfull ALL qualities are precision trimmed and the drops must be butt jointed.
dyes. An undiluted premixed heavy duty clear vinyl adhesive, suitable for textile
wallcovering, or Tapetex PRO-1 must be used. Installation advice is supplied with
Surface finish every roll.
A stain repellent finish prevents water based splashes penetrating and staining
the material. Such a splash will simply bead up on the surface and then, by Caution
gentle blotting with an absorbent tissue. Take care not to rub the surface as this After hanging 3 lengths, check for any defects. If there is a problem contact your
may push the liquid into the material and create a stain. Once a stain has been supplier immediately. We cannot accept any claims on labour or material after more
allowed to dry, it is virtually impossible to remove. Periodic vacuuming is than three lengths have been cut and applied.
recommended to prevent dust from building up on the products surface.
These wall materials are decorative products, not technical products, and intended for
Permeability / Breathability interior use. Do not apply in wet spaces, such as bathrooms.
Walls must not by subject to moisture accumulation restricting the escape of
moisture and increasing the risk of mold growth. Permeability is a measure of Delivery
the amount of water vapour (moisture) that can pass through the wallcovering in From stock by the full linear meter or linear yard.
a certain amount of time. with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with lower Perm Specification Bora
levels. a copy of the test report as per ASTM E96-12, is available on reguest. Name 137 cm – 54”
Width approx.
Indoor air quality Weight approx. gr / lm : 220
A copy of the UL Environment test report as per ASTM D5116, D6196 and oz / inyd : 7.1
D5197 is available on request. The data indicate the Level of emissions from the Composition woodpulp : 70%
designated product and how they compare to the emission criteria of the polyester : 30%
Gruinard IAQ standard. Repeat sisal : -

Fire rating Hanging height : -
ASTM E84 Class A and Euroclass fire rated. Reports. are available on request. width : -
The fire rating should not be construed to indicate hazards presented under random
actual fire conditions.
Forest Stewardship Council
Lightfastness and LRV rating
All qualities are tested for lightfastness as per I.S.O. 105-B02: 2014, Heraeus The woodpulp used in this collection is made of wood
original Hanau Xenotest 150S.The lightfastness and the LRV rating (Light from FSC-certified forests.
Reflectance Value) per individual item are published on our website.

Variations
There can be a variation between the samplematerial and the delivered product.
Stock cuttings are available for approval.

Made in the Netherlands. 67-5/24

BORA with 137 cm – 54”
67-1690

tapetex wall materials

67-1691 67-1692 67-1693

67-1694 67-1695 67-1696

67-1697 67-1698 67-1699

CANVASA tapetex wall materials

CANVASA TAPETEX wall materials

Sustainability Application
All nonwovens are made out FSC certified woodpulp, FSC A000531, reinforced All wallcoverings must be installed by experienced installation professionals who
with polyester for dimensional stability. In production all energy sources are understand wallcovering use and installation requirements for textile wallcovering.
green, solar, wind or hydro based, and all processes are water based. The
products do not contain PVC, chlorine, plasticizers, heavy metals or harmfull ALL qualities are precision trimmed and the drops must be butt jointed.
dyes. An undiluted premixed heavy duty clear vinyl adhesive, suitable for textile
wallcovering, or Tapetex PRO-1 must be used. Installation advice is supplied with
Surface finish every roll.
A stain repellent finish prevents water based splashes penetrating and staining
the material. Such a splash will simply bead up on the surface and then, by Caution
gentle blotting with an absorbent tissue. Take care not to rub the surface as this After hanging 3 lengths, check for any defects. If there is a problem contact your
may push the liquid into the material and create a stain. Once a stain has been supplier immediately. We cannot accept any claims on labour or material after more
allowed to dry, it is virtually impossible to remove. Periodic vacuuming is than three lengths have been cut and applied.
recommended to prevent dust from building up on the products surface.
These wall materials are decorative products, not technical products, and intended for
Permeability / Breathability interior use. Do not apply in wet spaces, such as bathrooms.
Walls must not by subject to moisture accumulation restricting the escape of
moisture and increasing the risk of mold growth. Permeability is a measure of Delivery
the amount of water vapour (moisture) that can pass through the wallcovering in From stock by the full linear meter or linear yard.
a certain amount of time. with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with lower Perm Specification Canvasa
levels. a copy of the test report as per ASTM E96-12, is available on reguest. Name 137 cm – 54”
Width approx.
Indoor air quality Weight approx. gr / lm : 360
A copy of the UL Environment test report as per ASTM D5116, D6196 and oz / inyd : 11.6
D5197 is available on request. The data indicate the Level of emissions from the Composition woodpulp : 70%
designated product and how they compare to the emission criteria of the polyester : 30%
Gruinard IAQ standard. Repeat sisal : -

Fire rating Hanging height : -
ASTM E84 Class A and Euroclass fire rated. Reports. are available on request. width : -
The fire rating should not be construed to indicate hazards presented under random
actual fire conditions.
Forest Stewardship Council
Lightfastness and LRV rating
All qualities are tested for lightfastness as per I.S.O. 105-B02: 2014, Heraeus The woodpulp used in this collection is made of wood
original Hanau Xenotest 150S.The lightfastness and the LRV rating (Light from FSC-certified forests.
Reflectance Value) per individual item are published on our website.

Variations
There can be a variation between the samplematerial and the delivered product.
Stock cuttings are available for approval.

Made in the Netherlands. 67-24/24

CANVASA with 137 cm – 54”
67-1880

tapetex wall materials

67-1881 67-1882 67-1883

67-1884 67-1885 67-1886

67-1887 67-1888 67-1889

CHAMBORD tapetex wall materials

CHAMBORD TAPETEX wall materials

Sustainability Application
All nonwovens are made out FSC certified woodpulp, FSC A000531, reinforced All wallcoverings must be installed by experienced installation professionals who
with polyester for dimensional stability. In production all energy sources are understand wallcovering use and installation requirements for textile wallcovering.
green, solar, wind or hydro based, and all processes are water based. The
products do not contain PVC, chlorine, plasticizers, heavy metals or harmfull ALL qualities are precision trimmed and the drops must be butt jointed.
dyes. An undiluted premixed heavy duty clear vinyl adhesive, suitable for textile
wallcovering, or Tapetex PRO-1 must be used. Installation advice is supplied with
Surface finish every roll.
A stain repellent finish prevents water based splashes penetrating and staining
the material. Such a splash will simply bead up on the surface and then, by Caution
gentle blotting with an absorbent tissue. Take care not to rub the surface as this After hanging 3 lengths, check for any defects. If there is a problem contact your
may push the liquid into the material and create a stain. Once a stain has been supplier immediately. We cannot accept any claims on labour or material after more
allowed to dry, it is virtually impossible to remove. Periodic vacuuming is than three lengths have been cut and applied.
recommended to prevent dust from building up on the products surface.
These wall materials are decorative products, not technical products, and intended for
Permeability / Breathability interior use. Do not apply in wet spaces, such as bathrooms.
Walls must not by subject to moisture accumulation restricting the escape of
moisture and increasing the risk of mold growth. Permeability is a measure of Delivery
the amount of water vapour (moisture) that can pass through the wallcovering in From stock by the full linear meter or linear yard.
a certain amount of time. with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with lower Perm Specification CHAMBORD
levels. a copy of the test report as per ASTM E96-12, is available on reguest. Name 137 cm – 54”
Width approx.
Indoor air quality Weight approx. gr / lm : 300
A copy of the UL Environment test report as per ASTM D5116, D6196 and oz / inyd : 9.7
D5197 is available on request. The data indicate the Level of emissions from the Composition woodpulp : 70%
designated product and how they compare to the emission criteria of the polyester : 30%
Gruinard IAQ standard. Repeat sisal : -

Fire rating Hanging height : -
ASTM E84 Class A and Euroclass fire rated. Reports. are available on request. width : -
The fire rating should not be construed to indicate hazards presented under random
actual fire conditions.

Lightfastness and LRV rating Forest Stewardship Council
All qualities are tested for lightfastness as per I.S.O. 105-B02: 2014, Heraeus
original Hanau Xenotest 150S.The lightfastness and the LRV rating (Light The woodpulp used in this collection is made of wood
Reflectance Value) per individual item are published on our website. from FSC-certified forests.

Variations
There can be a variation between the samplematerial and the delivered product.
Stock cuttings are available for approval.

Made in the Netherlands. 67-14/24

CHAMBORD with 137 cm – 54”

67-1780

tapetex wall materials

67-1781 67-1782 67-1783

67-1784 67-1785 67-1786

67-1787 67-1788 67-1789

CORONA tapetex wall materials

CORONA TAPETEX wall materials

Sustainability Application
All nonwovens are made out FSC certified woodpulp, FSC A000531, reinforced All wallcoverings must be installed by experienced installation professionals who
with polyester for dimensional stability. In production all energy sources are understand wallcovering use and installation requirements for textile wallcovering.
green, solar, wind or hydro based, and all processes are water based. The
products do not contain PVC, chlorine, plasticizers, heavy metals or harmfull ALL qualities are precision trimmed and the drops must be butt jointed.
dyes. An undiluted premixed heavy duty clear vinyl adhesive, suitable for textile
wallcovering, or Tapetex PRO-1 must be used. Installation advice is supplied with
Surface finish every roll.
A stain repellent finish prevents water based splashes penetrating and staining
the material. Such a splash will simply bead up on the surface and then, by Caution
gentle blotting with an absorbent tissue. Take care not to rub the surface as this After hanging 3 lengths, check for any defects. If there is a problem contact your
may push the liquid into the material and create a stain. Once a stain has been supplier immediately. We cannot accept any claims on labour or material after more
allowed to dry, it is virtually impossible to remove. Periodic vacuuming is than three lengths have been cut and applied.
recommended to prevent dust from building up on the products surface.
These wall materials are decorative products, not technical products, and intended for
Permeability / Breathability interior use. Do not apply in wet spaces, such as bathrooms.
Walls must not by subject to moisture accumulation restricting the escape of
moisture and increasing the risk of mold growth. Permeability is a measure of Delivery
the amount of water vapour (moisture) that can pass through the wallcovering in From stock by the full linear meter or linear yard.
a certain amount of time. with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with lower Perm Specification Corona
levels. a copy of the test report as per ASTM E96-12, is available on reguest. Name 137 cm – 54”
Width approx.
Indoor air quality Weight approx. gr / lm : 300
A copy of the UL Environment test report as per ASTM D5116, D6196 and oz / inyd : 9.7
D5197 is available on request. The data indicate the Level of emissions from the Composition woodpulp : 60%
designated product and how they compare to the emission criteria of the polyester : 40%
Gruinard IAQ standard. Repeat sisal : -

Fire rating Hanging height : -
ASTM E84 Class A and Euroclass fire rated. Reports. are available on request. width : -
The fire rating should not be construed to indicate hazards presented under random
actual fire conditions.

Lightfastness and LRV rating Forest Stewardship Council
All qualities are tested for lightfastness as per I.S.O. 105-B02: 2014, Heraeus
original Hanau Xenotest 150S.The lightfastness and the LRV rating (Light The woodpulp used in this collection is made of wood
Reflectance Value) per individual item are published on our website. from FSC-certified forests.

Variations
There can be a variation between the samplematerial and the delivered product.
Stock cuttings are available for approval.

Made in the Netherlands. 67-17/24

CORONA with 137 cm – 54”
67-1810

tapetex wall materials

67-1811 67-1812 67-1813

67-1814 67-1815 67-1816

67-1817 67-1818 67-1819

DEAUVILLE tapetex wall materials

DEAUVILLE TAPETEX wall materials

Sustainability Application
All nonwovens are made out FSC certified woodpulp, FSC A000531, reinforced All wallcoverings must be installed by experienced installation professionals who
with polyester for dimensional stability. In production all energy sources are understand wallcovering use and installation requirements for textile wallcovering.
green, solar, wind or hydro based, and all processes are water based. The
products do not contain PVC, chlorine, plasticizers, heavy metals or harmfull ALL qualities are precision trimmed and the drops must be butt jointed.
dyes. An undiluted premixed heavy duty clear vinyl adhesive, suitable for textile
wallcovering, or Tapetex PRO-1 must be used. Installation advice is supplied with
Surface finish every roll.
A stain repellent finish prevents water based splashes penetrating and staining
the material. Such a splash will simply bead up on the surface and then, by Caution
gentle blotting with an absorbent tissue. Take care not to rub the surface as this After hanging 3 lengths, check for any defects. If there is a problem contact your
may push the liquid into the material and create a stain. Once a stain has been supplier immediately. We cannot accept any claims on labour or material after more
allowed to dry, it is virtually impossible to remove. Periodic vacuuming is than three lengths have been cut and applied.
recommended to prevent dust from building up on the products surface.
These wall materials are decorative products, not technical products, and intended for
Permeability / Breathability interior use. Do not apply in wet spaces, such as bathrooms.
Walls must not by subject to moisture accumulation restricting the escape of
moisture and increasing the risk of mold growth. Permeability is a measure of Delivery
the amount of water vapour (moisture) that can pass through the wallcovering in From stock by the full linear meter or linear yard.
a certain amount of time. with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with lower Perm Specification Deauville
levels. a copy of the test report as per ASTM E96-12, is available on reguest. Name 137 cm – 54”
Width approx.
Indoor air quality Weight approx. gr / lm : 260
A copy of the UL Environment test report as per ASTM D5116, D6196 and oz / inyd : 8.4
D5197 is available on request. The data indicate the Level of emissions from the Composition woodpulp : 70%
designated product and how they compare to the emission criteria of the polyester : 30%
Gruinard IAQ standard. Repeat sisal : -

Fire rating Hanging height : -
ASTM E84 Class A and Euroclass fire rated. Reports. are available on request. width : 0.7 cm – 0.3”
The fire rating should not be construed to indicate hazards presented under on repeat
actual fire conditions.

Lightfastness and LRV rating Forest Stewardship Council
All qualities are tested for lightfastness as per I.S.O. 105-B02: 2014, Heraeus
original Hanau Xenotest 150S.The lightfastness and the LRV rating (Light The woodpulp used in this collection is made of wood
Reflectance Value) per individual item are published on our website. from FSC-certified forests.

Variations
There can be a variation between the samplematerial and the delivered product.
Stock cuttings are available for approval.

Made in the Netherlands. 67-6/24

DEAUVILLE with 137 cm – 54”
67-1700

tapetex wall materials

67-1701 67-1702 67-1703

67-1704 67-1705 67-1706

67-1707 67-1708 67-1709

FENDA tapetex wall materials

FENDA TAPETEX wall materials

Sustainability Application
All nonwovens are made out FSC certified woodpulp, FSC A000531, reinforced All wallcoverings must be installed by experienced installation professionals who
with polyester for dimensional stability. In production all energy sources are understand wallcovering use and installation requirements for textile wallcovering.
green, solar, wind or hydro based, and all processes are water based. The
products do not contain PVC, chlorine, plasticizers, heavy metals or harmfull ALL qualities are precision trimmed and the drops must be butt jointed.
dyes. An undiluted premixed heavy duty clear vinyl adhesive, suitable for textile
wallcovering, or Tapetex PRO-1 must be used. Installation advice is supplied with
Surface finish every roll.
A stain repellent finish prevents water based splashes penetrating and staining
the material. Such a splash will simply bead up on the surface and then, by Caution
gentle blotting with an absorbent tissue. Take care not to rub the surface as this After hanging 3 lengths, check for any defects. If there is a problem contact your
may push the liquid into the material and create a stain. Once a stain has been supplier immediately. We cannot accept any claims on labour or material after more
allowed to dry, it is virtually impossible to remove. Periodic vacuuming is than three lengths have been cut and applied.
recommended to prevent dust from building up on the products surface.
These wall materials are decorative products, not technical products, and intended for
Permeability / Breathability interior use. Do not apply in wet spaces, such as bathrooms.
Walls must not by subject to moisture accumulation restricting the escape of
moisture and increasing the risk of mold growth. Permeability is a measure of Delivery
the amount of water vapour (moisture) that can pass through the wallcovering in From stock by the full linear meter or linear yard.
a certain amount of time. with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with lower Perm Specification Fenda
levels. a copy of the test report as per ASTM E96-12, is available on reguest. Name
Width approx. 137 cm – 54”
Indoor air quality Weight approx. gr / lm : 220
A copy of the UL Environment test report as per ASTM D5116, D6196 and oz / inyd : 7.1
D5197 is available on request. The data indicate the Level of emissions from the Composition woodpulp : 70%
designated product and how they compare to the emission criteria of the polyester : 30%
Gruinard IAQ standard. Repeat sisal : -
height : -
Fire rating Hanging width : -
ASTM E84 Class A and Euroclass fire rated. Reports. are available on request. random
The fire rating should not be construed to indicate hazards presented under See kai 67-1680/1684
actual fire conditions.
Forest Stewardship Council
Lightfastness and LRV rating
All qualities are tested for lightfastness as per I.S.O. 105-B02: 2014, Heraeus The woodpulp used in this collection is made of wood
original Hanau Xenotest 150S.The lightfastness and the LRV rating (Light from FSC-certified forests.
Reflectance Value) per individual item are published on our website.

Variations
There can be a variation between the samplematerial and the delivered product.
Stock cuttings are available for approval.

Made in the Netherlands. 67-16/24

FENDA with 137 cm – 54”
67-1800

tapetex wall materials

67-1801 67-1802 67-1803

67-1804 67-1805 67-1806

67-1807 67-1808 67-1809

GRANDESSA tapetex wall materials

GRANDESSA TAPETEX wall materials

Sustainability Application
All nonwovens are made out FSC certified woodpulp, FSC A000531, reinforced All wallcoverings must be installed by experienced installation professionals who
with polyester for dimensional stability. In production all energy sources are understand wallcovering use and installation requirements for textile wallcovering.
green, solar, wind or hydro based, and all processes are water based. The
products do not contain PVC, chlorine, plasticizers, heavy metals or harmfull ALL qualities are precision trimmed and the drops must be butt jointed.
dyes. An undiluted premixed heavy duty clear vinyl adhesive, suitable for textile
wallcovering, or Tapetex PRO-1 must be used. Installation advice is supplied with
Surface finish every roll.
A stain repellent finish prevents water based splashes penetrating and staining
the material. Such a splash will simply bead up on the surface and then, by Caution
gentle blotting with an absorbent tissue. Take care not to rub the surface as this After hanging 3 lengths, check for any defects. If there is a problem contact your
may push the liquid into the material and create a stain. Once a stain has been supplier immediately. We cannot accept any claims on labour or material after more
allowed to dry, it is virtually impossible to remove. Periodic vacuuming is than three lengths have been cut and applied.
recommended to prevent dust from building up on the products surface.
These wall materials are decorative products, not technical products, and intended for
Permeability / Breathability interior use. Do not apply in wet spaces, such as bathrooms.
Walls must not by subject to moisture accumulation restricting the escape of
moisture and increasing the risk of mold growth. Permeability is a measure of Delivery
the amount of water vapour (moisture) that can pass through the wallcovering in From stock by the full linear meter or linear yard.
a certain amount of time. with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with lower Perm Specification GRANDESSA
levels. a copy of the test report as per ASTM E96-12, is available on reguest. Name 137 cm – 54”
Width approx.
Indoor air quality Weight approx. gr / lm : 300
A copy of the UL Environment test report as per ASTM D5116, D6196 and oz / inyd : 9.7
D5197 is available on request. The data indicate the Level of emissions from the Composition woodpulp : 70%
designated product and how they compare to the emission criteria of the polyester : 30%
Gruinard IAQ standard. Repeat sisal : -

Fire rating Hanging height : -
ASTM E84 Class A and Euroclass fire rated. Reports. are available on request. width : -
The fire rating should not be construed to indicate hazards presented under random
actual fire conditions.
Forest Stewardship Council
Lightfastness and LRV rating
All qualities are tested for lightfastness as per I.S.O. 105-B02: 2014, Heraeus The woodpulp used in this collection is made of wood
original Hanau Xenotest 150S.The lightfastness and the LRV rating (Light from FSC-certified forests.
Reflectance Value) per individual item are published on our website.

Variations
There can be a variation between the samplematerial and the delivered product.
Stock cuttings are available for approval.

Made in the Netherlands. 67-13/24

GRANDESSA with 137 cm – 54”
67-1770

tapetex wall materials

67-1771 67-1772 67-1773

67-1774 67-1775 67-1776

67-1777 67-1778 67-1779

KAI tapetex wall materials

KAI TAPETEX wall materials

Sustainability Application
All nonwovens are made out FSC certified woodpulp, FSC A000531, reinforced All wallcoverings must be installed by experienced installation professionals who
with polyester for dimensional stability. In production all energy sources are understand wallcovering use and installation requirements for textile wallcovering.
green, solar, wind or hydro based, and all processes are water based. The
products do not contain PVC, chlorine, plasticizers, heavy metals or harmfull ALL qualities are precision trimmed and the drops must be butt jointed.
dyes. An undiluted premixed heavy duty clear vinyl adhesive, suitable for textile
wallcovering, or Tapetex PRO-1 must be used. Installation advice is supplied with
Surface finish every roll.
A stain repellent finish prevents water based splashes penetrating and staining
the material. Such a splash will simply bead up on the surface and then, by Caution
gentle blotting with an absorbent tissue. Take care not to rub the surface as this After hanging 3 lengths, check for any defects. If there is a problem contact your
may push the liquid into the material and create a stain. Once a stain has been supplier immediately. We cannot accept any claims on labour or material after more
allowed to dry, it is virtually impossible to remove. Periodic vacuuming is than three lengths have been cut and applied.
recommended to prevent dust from building up on the products surface.
These wall materials are decorative products, not technical products, and intended for
Permeability / Breathability interior use. Do not apply in wet spaces, such as bathrooms.
Walls must not by subject to moisture accumulation restricting the escape of
moisture and increasing the risk of mold growth. Permeability is a measure of Delivery
the amount of water vapour (moisture) that can pass through the wallcovering in From stock by the full linear meter or linear yard.
a certain amount of time. with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with lower Perm Specification Kai
levels. a copy of the test report as per ASTM E96-12, is available on reguest. Name 137 cm – 54”
Width approx.
Indoor air quality Weight approx. gr / lm : 220
A copy of the UL Environment test report as per ASTM D5116, D6196 and oz / inyd : 7.1
D5197 is available on request. The data indicate the Level of emissions from the Composition woodpulp : 70%
designated product and how they compare to the emission criteria of the polyester : 30%
Gruinard IAQ standard. Repeat sisal : -

Fire rating Hanging height : 2.9 cm – 1.1”
ASTM E84 Class A and Euroclass fire rated. Reports. are available on request. width : 2.9 cm – 1.1”
The fire rating should not be construed to indicate hazards presented under on repeat
actual fire conditions. use a rubber roller instead of a spatula
Solid colours see Fenda 67-1800/1809
Lightfastness and LRV rating
All qualities are tested for lightfastness as per I.S.O. 105-B02: 2014, Heraeus Forest Stewardship Council
original Hanau Xenotest 150S.The lightfastness and the LRV rating (Light
Reflectance Value) per individual item are published on our website. The woodpulp used in this collection is made of wood
from FSC-certified forests.
Variations
There can be a variation between the samplematerial and the delivered product.
Stock cuttings are available for approval.

Made in the Netherlands. 67-4/24

KAI with 137 cm – 54”
67-1680

tapetex wall materials

67-1681 67-1682

67-1683 67-1684

LINO tapetex wall materials

LINO TAPETEX wall materials

Sustainability Application
All nonwovens are made out FSC certified woodpulp, FSC A000531, reinforced All wallcoverings must be installed by experienced installation professionals who
with polyester for dimensional stability. In production all energy sources are understand wallcovering use and installation requirements for textile wallcovering.
green, solar, wind or hydro based, and all processes are water based. The
products do not contain PVC, chlorine, plasticizers, heavy metals or harmfull ALL qualities are precision trimmed and the drops must be butt jointed.
dyes. An undiluted premixed heavy duty clear vinyl adhesive, suitable for textile
wallcovering, or Tapetex PRO-1 must be used. Installation advice is supplied with
Surface finish every roll.
A stain repellent finish prevents water based splashes penetrating and staining
the material. Such a splash will simply bead up on the surface and then, by Caution
gentle blotting with an absorbent tissue. Take care not to rub the surface as this After hanging 3 lengths, check for any defects. If there is a problem contact your
may push the liquid into the material and create a stain. Once a stain has been supplier immediately. We cannot accept any claims on labour or material after more
allowed to dry, it is virtually impossible to remove. Periodic vacuuming is than three lengths have been cut and applied.
recommended to prevent dust from building up on the products surface.
These wall materials are decorative products, not technical products, and intended for
Permeability / Breathability interior use. Do not apply in wet spaces, such as bathrooms.
Walls must not by subject to moisture accumulation restricting the escape of
moisture and increasing the risk of mold growth. Permeability is a measure of Delivery
the amount of water vapour (moisture) that can pass through the wallcovering in From stock by the full linear meter or linear yard.
a certain amount of time. with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with lower Perm Specification Lino
levels. a copy of the test report as per ASTM E96-12, is available on reguest. Name 137 cm – 54”
Width approx.
Indoor air quality Weight approx. gr / lm : 220
A copy of the UL Environment test report as per ASTM D5116, D6196 and oz / inyd : 7.1
D5197 is available on request. The data indicate the Level of emissions from the Composition woodpulp : 70%
designated product and how they compare to the emission criteria of the polyester : 30%
Gruinard IAQ standard. Repeat sisal : -

Fire rating Hanging height : -
ASTM E84 Class A and Euroclass fire rated. Reports. are available on request. width : -
The fire rating should not be construed to indicate hazards presented under random
actual fire conditions.
Forest Stewardship Council
Lightfastness and LRV rating
All qualities are tested for lightfastness as per I.S.O. 105-B02: 2014, Heraeus The woodpulp used in this collection is made of wood
original Hanau Xenotest 150S.The lightfastness and the LRV rating (Light from FSC-certified forests.
Reflectance Value) per individual item are published on our website.

Variations
There can be a variation between the samplematerial and the delivered product.
Stock cuttings are available for approval.

Made in the Netherlands. 67-21/24

LINO with 137 cm – 54”
67-1850

tapetex wall materials

67-1851 67-1852 67-1853

67-1854 67-1855 67-1856

67-1857 67-1858 67-1859

MAESTRO tapetex wall materials

MAESTRO TAPETEX wall materials

Sustainability Application
All nonwovens are made out FSC certified woodpulp, FSC A000531, reinforced All wallcoverings must be installed by experienced installation professionals who
with polyester for dimensional stability. In production all energy sources are understand wallcovering use and installation requirements for textile wallcovering.
green, solar, wind or hydro based, and all processes are water based. The
products do not contain PVC, chlorine, plasticizers, heavy metals or harmfull ALL qualities are precision trimmed and the drops must be butt jointed.
dyes. An undiluted premixed heavy duty clear vinyl adhesive, suitable for textile
wallcovering, or Tapetex PRO-1 must be used. Installation advice is supplied with
Surface finish every roll.
A stain repellent finish prevents water based splashes penetrating and staining
the material. Such a splash will simply bead up on the surface and then, by Caution
gentle blotting with an absorbent tissue. Take care not to rub the surface as this After hanging 3 lengths, check for any defects. If there is a problem contact your
may push the liquid into the material and create a stain. Once a stain has been supplier immediately. We cannot accept any claims on labour or material after more
allowed to dry, it is virtually impossible to remove. Periodic vacuuming is than three lengths have been cut and applied.
recommended to prevent dust from building up on the products surface.
These wall materials are decorative products, not technical products, and intended for
Permeability / Breathability interior use. Do not apply in wet spaces, such as bathrooms.
Walls must not by subject to moisture accumulation restricting the escape of
moisture and increasing the risk of mold growth. Permeability is a measure of Delivery
the amount of water vapour (moisture) that can pass through the wallcovering in From stock by the full linear meter or linear yard.
a certain amount of time. with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with lower Perm Specification Maestro
levels. a copy of the test report as per ASTM E96-12, is available on reguest. Name 137 cm – 54”
Width approx.
Indoor air quality Weight approx. gr / lm : 470
A copy of the UL Environment test report as per ASTM D5116, D6196 and oz / inyd : 15.2
D5197 is available on request. The data indicate the Level of emissions from the Composition woodpulp : 60%
designated product and how they compare to the emission criteria of the polyester : 40%
Gruinard IAQ standard. Repeat sisal : -

Fire rating Hanging height : -
ASTM E84 Class A and Euroclass fire rated. Reports. are available on request. width : -
The fire rating should not be construed to indicate hazards presented under random
actual fire conditions. use a rubber roller instead of a spatula

Lightfastness and LRV rating Forest Stewardship Council
All qualities are tested for lightfastness as per I.S.O. 105-B02: 2014, Heraeus
original Hanau Xenotest 150S.The lightfastness and the LRV rating (Light The woodpulp used in this collection is made of wood
Reflectance Value) per individual item are published on our website. from FSC-certified forests.

Variations
There can be a variation between the samplematerial and the delivered product.
Stock cuttings are available for approval.

Made in the Netherlands. 67-1/24

MAESTRO with 137 cm – 54”
67-1650

tapetex wall materials

67-1651 67-1652 67-1653

67-1654 67-1655 67-1656

67-1657 67-1658 67-1659

MIRABEL tapetex wall materials

MIRABEL TAPETEX wall materials

Sustainability Application
All nonwovens are made out FSC certified woodpulp, FSC A000531, reinforced All wallcoverings must be installed by experienced installation professionals who
with polyester for dimensional stability. In production all energy sources are understand wallcovering use and installation requirements for textile wallcovering.
green, solar, wind or hydro based, and all processes are water based. The
products do not contain PVC, chlorine, plasticizers, heavy metals or harmfull ALL qualities are precision trimmed and the drops must be butt jointed.
dyes. An undiluted premixed heavy duty clear vinyl adhesive, suitable for textile
wallcovering, or Tapetex PRO-1 must be used. Installation advice is supplied with
Surface finish every roll.
A stain repellent finish prevents water based splashes penetrating and staining
the material. Such a splash will simply bead up on the surface and then, by Caution
gentle blotting with an absorbent tissue. Take care not to rub the surface as this After hanging 3 lengths, check for any defects. If there is a problem contact your
may push the liquid into the material and create a stain. Once a stain has been supplier immediately. We cannot accept any claims on labour or material after more
allowed to dry, it is virtually impossible to remove. Periodic vacuuming is than three lengths have been cut and applied.
recommended to prevent dust from building up on the products surface.
These wall materials are decorative products, not technical products, and intended for
Permeability / Breathability interior use. Do not apply in wet spaces, such as bathrooms.
Walls must not by subject to moisture accumulation restricting the escape of
moisture and increasing the risk of mold growth. Permeability is a measure of Delivery
the amount of water vapour (moisture) that can pass through the wallcovering in From stock by the full linear meter or linear yard.
a certain amount of time. with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with lower Perm Specification Mirabel
levels. a copy of the test report as per ASTM E96-12, is available on reguest. Name
Width approx. 137 cm – 54”
Indoor air quality Weight approx. gr / lm : 360
A copy of the UL Environment test report as per ASTM D5116, D6196 and oz / inyd : 11.6
D5197 is available on request. The data indicate the Level of emissions from the Composition woodpulp : 60%
designated product and how they compare to the emission criteria of the polyester : 40%
Gruinard IAQ standard. Repeat
sisal : -
Fire rating Hanging height : -
ASTM E84 Class A and Euroclass fire rated. Reports. are available on request. width : -
The fire rating should not be construed to indicate hazards presented under random
actual fire conditions.
Forest Stewardship Council
Lightfastness and LRV rating
All qualities are tested for lightfastness as per I.S.O. 105-B02: 2014, Heraeus The woodpulp used in this collection is made of wood
original Hanau Xenotest 150S.The lightfastness and the LRV rating (Light from FSC-certified forests.
Reflectance Value) per individual item are published on our website.

Variations
There can be a variation between the samplematerial and the delivered product.
Stock cuttings are available for approval.

Made in the Netherlands. 67-19/24

MIRABEL with 137 cm – 54”
67-1830

tapetex wall materials

67-1831 67-1832 67-1833

67-1834 67-1835 67-1836

67-1837 67-1838 67-1839

MONTADO tapetex wall materials

MONTADO TAPETEX wall materials

Sustainability Application
All nonwovens are made out FSC certified woodpulp, FSC A000531, reinforced All wallcoverings must be installed by experienced installation professionals who
with polyester for dimensional stability. In production all energy sources are understand wallcovering use and installation requirements for textile wallcovering.
green, solar, wind or hydro based, and all processes are water based. The
products do not contain PVC, chlorine, plasticizers, heavy metals or harmfull ALL qualities are precision trimmed and the drops must be butt jointed.
dyes. An undiluted premixed heavy duty clear vinyl adhesive, suitable for textile
wallcovering, or Tapetex PRO-1 must be used. Installation advice is supplied with
Surface finish every roll.
A stain repellent finish prevents water based splashes penetrating and staining
the material. Such a splash will simply bead up on the surface and then, by Caution
gentle blotting with an absorbent tissue. Take care not to rub the surface as this After hanging 3 lengths, check for any defects. If there is a problem contact your
may push the liquid into the material and create a stain. Once a stain has been supplier immediately. We cannot accept any claims on labour or material after more
allowed to dry, it is virtually impossible to remove. Periodic vacuuming is than three lengths have been cut and applied.
recommended to prevent dust from building up on the products surface.
These wall materials are decorative products, not technical products, and intended for
Permeability / Breathability interior use. Do not apply in wet spaces, such as bathrooms.
Walls must not by subject to moisture accumulation restricting the escape of
moisture and increasing the risk of mold growth. Permeability is a measure of Delivery
the amount of water vapour (moisture) that can pass through the wallcovering in From stock by the full linear meter or linear yard.
a certain amount of time. with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with lower Perm Specification Montado
levels. a copy of the test report as per ASTM E96-12, is available on reguest. Name 137 cm – 54”
Width approx.
Indoor air quality Weight approx. gr / lm : 540
A copy of the UL Environment test report as per ASTM D5116, D6196 and oz / inyd : 17.4
D5197 is available on request. The data indicate the Level of emissions from the Composition woodpulp : 60%
designated product and how they compare to the emission criteria of the polyester : 40%
Gruinard IAQ standard. Repeat sisal : -

Fire rating Hanging height : -
ASTM E84 Class A and Euroclass fire rated. Reports. are available on request. width : -
The fire rating should not be construed to indicate hazards presented under random
actual fire conditions. use a rubber roller instead of a spatula

Lightfastness and LRV rating Forest Stewardship Council
All qualities are tested for lightfastness as per I.S.O. 105-B02: 2014, Heraeus
original Hanau Xenotest 150S.The lightfastness and the LRV rating (Light The woodpulp used in this collection is made of wood
Reflectance Value) per individual item are published on our website. from FSC-certified forests.

Variations
There can be a variation between the samplematerial and the delivered product.
Stock cuttings are available for approval.

Made in the Netherlands. 67-8/24

MONTADO with 137 cm – 54”
67-1720

tapetex wall materials

67-1721 67-1722 67-1723

67-1724 67-1725 67-1726

67-1727 67-1728 67-1729