TAPETEX 67

MONTRESOR tapetex wall materials

MONTRESOR TAPETEX wall materials

Sustainability Application
All nonwovens are made out FSC certified woodpulp, FSC A000531, reinforced All wallcoverings must be installed by experienced installation professionals who
with polyester for dimensional stability. In production all energy sources are understand wallcovering use and installation requirements for textile wallcovering.
green, solar, wind or hydro based, and all processes are water based. The
products do not contain PVC, chlorine, plasticizers, heavy metals or harmfull ALL qualities are precision trimmed and the drops must be butt jointed.
dyes. An undiluted premixed heavy duty clear vinyl adhesive, suitable for textile
wallcovering, or Tapetex PRO-1 must be used. Installation advice is supplied with
Surface finish every roll.
A stain repellent finish prevents water based splashes penetrating and staining
the material. Such a splash will simply bead up on the surface and then, by Caution
gentle blotting with an absorbent tissue. Take care not to rub the surface as this After hanging 3 lengths, check for any defects. If there is a problem contact your
may push the liquid into the material and create a stain. Once a stain has been supplier immediately. We cannot accept any claims on labour or material after more
allowed to dry, it is virtually impossible to remove. Periodic vacuuming is than three lengths have been cut and applied.
recommended to prevent dust from building up on the products surface.
These wall materials are decorative products, not technical products, and intended for
Permeability / Breathability interior use. Do not apply in wet spaces, such as bathrooms.
Walls must not by subject to moisture accumulation restricting the escape of
moisture and increasing the risk of mold growth. Permeability is a measure of Delivery
the amount of water vapour (moisture) that can pass through the wallcovering in From stock by the full linear meter or linear yard.
a certain amount of time. with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with lower Perm Specification Montresor
levels. a copy of the test report as per ASTM E96-12, is available on reguest. Name 137 cm – 54”
Width approx.
Indoor air quality Weight approx. gr / lm : 440
A copy of the UL Environment test report as per ASTM D5116, D6196 and oz / inyd : 14.2
D5197 is available on request. The data indicate the Level of emissions from the Composition woodpulp : 60%
designated product and how they compare to the emission criteria of the polyester : 40%
Gruinard IAQ standard. Repeat sisal : -

Fire rating Hanging height : -
ASTM E84 Class A and Euroclass fire rated. Reports. are available on request. width : 6.5 cm – 2.6”
The fire rating should not be construed to indicate hazards presented under on repeat
actual fire conditions. use a rubber roller instead of a spatula

Lightfastness and LRV rating Forest Stewardship Council
All qualities are tested for lightfastness as per I.S.O. 105-B02: 2014, Heraeus
original Hanau Xenotest 150S.The lightfastness and the LRV rating (Light The woodpulp used in this collection is made of wood
Reflectance Value) per individual item are published on our website. from FSC-certified forests.

Variations
There can be a variation between the samplematerial and the delivered product.
Stock cuttings are available for approval.

Made in the Netherlands. 67-3/24

MONTRESOR with 137 cm – 54”
67-1670

tapetex wall materials

67-1671 67-1672

67-1673 67-1674

ORIENTA tapetex wall materials

ORIENTA TAPETEX wall materials

Sustainability Application
All nonwovens are made out FSC certified woodpulp, FSC A000531, reinforced All wallcoverings must be installed by experienced installation professionals who
with polyester for dimensional stability. In production all energy sources are understand wallcovering use and installation requirements for textile wallcovering.
green, solar, wind or hydro based, and all processes are water based. The
products do not contain PVC, chlorine, plasticizers, heavy metals or harmfull ALL qualities are precision trimmed and the drops must be butt jointed.
dyes. An undiluted premixed heavy duty clear vinyl adhesive, suitable for textile
wallcovering, or Tapetex PRO-1 must be used. Installation advice is supplied with
Surface finish every roll.
A stain repellent finish prevents water based splashes penetrating and staining
the material. Such a splash will simply bead up on the surface and then, by Caution
gentle blotting with an absorbent tissue. Take care not to rub the surface as this After hanging 3 lengths, check for any defects. If there is a problem contact your
may push the liquid into the material and create a stain. Once a stain has been supplier immediately. We cannot accept any claims on labour or material after more
allowed to dry, it is virtually impossible to remove. Periodic vacuuming is than three lengths have been cut and applied.
recommended to prevent dust from building up on the products surface.
These wall materials are decorative products, not technical products, and intended for
Permeability / Breathability interior use. Do not apply in wet spaces, such as bathrooms.
Walls must not by subject to moisture accumulation restricting the escape of
moisture and increasing the risk of mold growth. Permeability is a measure of Delivery
the amount of water vapour (moisture) that can pass through the wallcovering in From stock by the full linear meter or linear yard.
a certain amount of time. with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with lower Perm Specification Orienta
levels. a copy of the test report as per ASTM E96-12, is available on reguest. Name 137 cm – 54”
Width approx.
Indoor air quality Weight approx. gr / lm : 220
A copy of the UL Environment test report as per ASTM D5116, D6196 and oz / inyd : 7.1
D5197 is available on request. The data indicate the Level of emissions from the Composition woodpulp : 70%
designated product and how they compare to the emission criteria of the polyester : 30%
Gruinard IAQ standard. Repeat sisal : -

Fire rating Hanging height : -
ASTM E84 Class A and Euroclass fire rated. Reports. are available on request. width : -
The fire rating should not be construed to indicate hazards presented under random
actual fire conditions. See Venetian 67-1730/1734

Lightfastness and LRV rating Forest Stewardship Council
All qualities are tested for lightfastness as per I.S.O. 105-B02: 2014, Heraeus
original Hanau Xenotest 150S.The lightfastness and the LRV rating (Light The woodpulp used in this collection is made of wood
Reflectance Value) per individual item are published on our website. from FSC-certified forests.

Variations
There can be a variation between the samplematerial and the delivered product.
Stock cuttings are available for approval.

Made in the Netherlands. 67-7/24

ORIENTA with 137 cm – 54”
67-1710

tapetex wall materials

67-1711 67-1712 67-1713

67-1714 67-1715 67-1716

67-1717 67-1718 67-1719

PRIMAVERA tapetex wall materials

PRIMAVERA TAPETEX wall materials

Sustainability Application
All nonwovens are made out FSC certified woodpulp, FSC A000531, reinforced All wallcoverings must be installed by experienced installation professionals who
with polyester for dimensional stability. In production all energy sources are understand wallcovering use and installation requirements for textile wallcovering.
green, solar, wind or hydro based, and all processes are water based. The
products do not contain PVC, chlorine, plasticizers, heavy metals or harmfull ALL qualities are precision trimmed and the drops must be butt jointed.
dyes. An undiluted premixed heavy duty clear vinyl adhesive, suitable for textile
wallcovering, or Tapetex PRO-1 must be used. Installation advice is supplied with
Surface finish every roll.
A stain repellent finish prevents water based splashes penetrating and staining
the material. Such a splash will simply bead up on the surface and then, by Caution
gentle blotting with an absorbent tissue. Take care not to rub the surface as this After hanging 3 lengths, check for any defects. If there is a problem contact your
may push the liquid into the material and create a stain. Once a stain has been supplier immediately. We cannot accept any claims on labour or material after more
allowed to dry, it is virtually impossible to remove. Periodic vacuuming is than three lengths have been cut and applied.
recommended to prevent dust from building up on the products surface.
These wall materials are decorative products, not technical products, and intended for
Permeability / Breathability interior use. Do not apply in wet spaces, such as bathrooms.
Walls must not by subject to moisture accumulation restricting the escape of
moisture and increasing the risk of mold growth. Permeability is a measure of Delivery
the amount of water vapour (moisture) that can pass through the wallcovering in From stock by the full linear meter or linear yard.
a certain amount of time. with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with lower Perm Specification Primavera
levels. a copy of the test report as per ASTM E96-12, is available on reguest. Name 137 cm – 54”
Width approx.
Indoor air quality Weight approx. gr / lm : 360
A copy of the UL Environment test report as per ASTM D5116, D6196 and oz / inyd : 11.6
D5197 is available on request. The data indicate the Level of emissions from the Composition woodpulp : 70%
designated product and how they compare to the emission criteria of the polyester : 30%
Gruinard IAQ standard. Repeat sisal : -

Fire rating Hanging height : 22.8 cm – 9.0”
ASTM E84 Class A and Euroclass fire rated. Reports. are available on request. width : 45.7 cm – 18.0”
The fire rating should not be construed to indicate hazards presented under on repeat
actual fire conditions. use a rubber roller instead of a spatula

Lightfastness and LRV rating Forest Stewardship Council
All qualities are tested for lightfastness as per I.S.O. 105-B02: 2014, Heraeus
original Hanau Xenotest 150S.The lightfastness and the LRV rating (Light The woodpulp used in this collection is made of wood
Reflectance Value) per individual item are published on our website. from FSC-certified forests.

Variations
There can be a variation between the samplematerial and the delivered product.
Stock cuttings are available for approval.

Made in the Netherlands. 67-18/24

PRIMAVERA with 137 cm – 54”
67-1820

tapetex wall materials

67-1821 67-1822

67-1823 67-1824

RONDO tapetex wall materials

RONDO TAPETEX wall materials

Sustainability Application
All nonwovens are made out FSC certified woodpulp, FSC A000531, reinforced All wallcoverings must be installed by experienced installation professionals who
with polyester for dimensional stability. In production all energy sources are understand wallcovering use and installation requirements for textile wallcovering.
green, solar, wind or hydro based, and all processes are water based. The
products do not contain PVC, chlorine, plasticizers, heavy metals or harmfull ALL qualities are precision trimmed and the drops must be butt jointed.
dyes. An undiluted premixed heavy duty clear vinyl adhesive, suitable for textile
wallcovering, or Tapetex PRO-1 must be used. Installation advice is supplied with
Surface finish every roll.
A stain repellent finish prevents water based splashes penetrating and staining
the material. Such a splash will simply bead up on the surface and then, by Caution
gentle blotting with an absorbent tissue. Take care not to rub the surface as this After hanging 3 lengths, check for any defects. If there is a problem contact your
may push the liquid into the material and create a stain. Once a stain has been supplier immediately. We cannot accept any claims on labour or material after more
allowed to dry, it is virtually impossible to remove. Periodic vacuuming is than three lengths have been cut and applied.
recommended to prevent dust from building up on the products surface.
These wall materials are decorative products, not technical products, and intended for
Permeability / Breathability interior use. Do not apply in wet spaces, such as bathrooms.
Walls must not by subject to moisture accumulation restricting the escape of
moisture and increasing the risk of mold growth. Permeability is a measure of Delivery
the amount of water vapour (moisture) that can pass through the wallcovering in From stock by the full linear meter or linear yard.
a certain amount of time. with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with lower Perm Specification Rondo
levels. a copy of the test report as per ASTM E96-12, is available on reguest. Name 137 cm – 54”
Width approx.
Indoor air quality Weight approx. gr / lm : 470
A copy of the UL Environment test report as per ASTM D5116, D6196 and oz / inyd : 15.2
D5197 is available on request. The data indicate the Level of emissions from the Composition woodpulp : 60%
designated product and how they compare to the emission criteria of the polyester : 40%
Gruinard IAQ standard. Repeat sisal : -

Fire rating Hanging height : 8.0 cm – 3.1”
ASTM E84 Class A and Euroclass fire rated. Reports. are available on request. width : 4.0 cm – 1.6”
The fire rating should not be construed to indicate hazards presented under on repeat
actual fire conditions. use a rubber instead of a spatula

Lightfastness and LRV rating Forest Stewardship Council
All qualities are tested for lightfastness as per I.S.O. 105-B02: 2014, Heraeus
original Hanau Xenotest 150S.The lightfastness and the LRV rating (Light The woodpulp used in this collection is made of wood
Reflectance Value) per individual item are published on our website. from FSC-certified forests.

Variations
There can be a variation between the samplematerial and the delivered product.
Stock cuttings are available for approval.

Made in the Netherlands. 67-12/24

RONDO with 137 cm – 54”
67-1760

tapetex wall materials

67-1761 67-1762

67-1763 67-1764

SAMSARA tapetex wall materials

SAMSARA TAPETEX wall materials

Sustainability Application
All nonwovens are made out FSC certified woodpulp, FSC A000531, reinforced All wallcoverings must be installed by experienced installation professionals who
with polyester for dimensional stability. In production all energy sources are understand wallcovering use and installation requirements for textile wallcovering.
green, solar, wind or hydro based, and all processes are water based. The
products do not contain PVC, chlorine, plasticizers, heavy metals or harmfull ALL qualities are precision trimmed and the drops must be butt jointed.
dyes. An undiluted premixed heavy duty clear vinyl adhesive, suitable for textile
wallcovering, or Tapetex PRO-1 must be used. Installation advice is supplied with
Surface finish every roll.
A stain repellent finish prevents water based splashes penetrating and staining
the material. Such a splash will simply bead up on the surface and then, by Caution
gentle blotting with an absorbent tissue. Take care not to rub the surface as this After hanging 3 lengths, check for any defects. If there is a problem contact your
may push the liquid into the material and create a stain. Once a stain has been supplier immediately. We cannot accept any claims on labour or material after more
allowed to dry, it is virtually impossible to remove. Periodic vacuuming is than three lengths have been cut and applied.
recommended to prevent dust from building up on the products surface.
These wall materials are decorative products, not technical products, and intended for
Permeability / Breathability interior use. Do not apply in wet spaces, such as bathrooms.
Walls must not by subject to moisture accumulation restricting the escape of
moisture and increasing the risk of mold growth. Permeability is a measure of Delivery
the amount of water vapour (moisture) that can pass through the wallcovering in From stock by the full linear meter or linear yard.
a certain amount of time. with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with lower Perm Specification Samsara
levels. a copy of the test report as per ASTM E96-12, is available on reguest. Name 137 cm – 54”
Width approx.
Indoor air quality Weight approx. gr / lm : 300
A copy of the UL Environment test report as per ASTM D5116, D6196 and oz / inyd : 9.7
D5197 is available on request. The data indicate the Level of emissions from the Composition woodpulp : 70%
designated product and how they compare to the emission criteria of the polyester : 30%
Gruinard IAQ standard. Repeat sisal : -

Fire rating Hanging height : 5.4 cm -2.1”
ASTM E84 Class A and Euroclass fire rated. Reports. are available on request. width : 5.7 cm – 2.2”
The fire rating should not be construed to indicate hazards presented under on repeat
actual fire conditions. use a rubber roller instead of a spatula

Lightfastness and LRV rating Forest Stewardship Council
All qualities are tested for lightfastness as per I.S.O. 105-B02: 2014, Heraeus
original Hanau Xenotest 150S.The lightfastness and the LRV rating (Light The woodpulp used in this collection is made of wood
Reflectance Value) per individual item are published on our website. from FSC-certified forests.

Variations
There can be a variation between the samplematerial and the delivered product.
Stock cuttings are available for approval.

Made in the Netherlands. 67-11/24

SAMSARA with 137 cm – 54”
67-1750

tapetex wall materials

67-1751 67-1752

67-1753 67-1754

SASHIKO tapetex wall materials

SASHIKO TAPETEX wall materials

Sustainability Application
All nonwovens are made out FSC certified woodpulp, FSC A000531, reinforced All wallcoverings must be installed by experienced installation professionals who
with polyester for dimensional stability. In production all energy sources are understand wallcovering use and installation requirements for textile wallcovering.
green, solar, wind or hydro based, and all processes are water based. The
products do not contain PVC, chlorine, plasticizers, heavy metals or harmfull ALL qualities are precision trimmed and the drops must be butt jointed.
dyes. An undiluted premixed heavy duty clear vinyl adhesive, suitable for textile
wallcovering, or Tapetex PRO-1 must be used. Installation advice is supplied with
Surface finish every roll.
A stain repellent finish prevents water based splashes penetrating and staining
the material. Such a splash will simply bead up on the surface and then, by Caution
gentle blotting with an absorbent tissue. Take care not to rub the surface as this After hanging 3 lengths, check for any defects. If there is a problem contact your
may push the liquid into the material and create a stain. Once a stain has been supplier immediately. We cannot accept any claims on labour or material after more
allowed to dry, it is virtually impossible to remove. Periodic vacuuming is than three lengths have been cut and applied.
recommended to prevent dust from building up on the products surface.
These wall materials are decorative products, not technical products, and intended for
Permeability / Breathability interior use. Do not apply in wet spaces, such as bathrooms.
Walls must not by subject to moisture accumulation restricting the escape of
moisture and increasing the risk of mold growth. Permeability is a measure of Delivery
the amount of water vapour (moisture) that can pass through the wallcovering in From stock by the full linear meter or linear yard.
a certain amount of time. with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with lower Perm Specification Sashiko
levels. a copy of the test report as per ASTM E96-12, is available on reguest. Name 137 cm – 54”
Width approx.
Indoor air quality Weight approx. gr / lm : 540
A copy of the UL Environment test report as per ASTM D5116, D6196 and oz / inyd : 17.4
D5197 is available on request. The data indicate the Level of emissions from the Composition woodpulp : 60%
designated product and how they compare to the emission criteria of the polyester : 40%
Gruinard IAQ standard. Repeat sisal : -

Fire rating Hanging height : 20.0 cm – 7.9”
ASTM E84 Class A and Euroclass fire rated. Reports. are available on request. width : -
The fire rating should not be construed to indicate hazards presented under on repeat
actual fire conditions. use a rubber roller instead of a spatula

Lightfastness and LRV rating Forest Stewardship Council
All qualities are tested for lightfastness as per I.S.O. 105-B02: 2014, Heraeus
original Hanau Xenotest 150S.The lightfastness and the LRV rating (Light The woodpulp used in this collection is made of wood
Reflectance Value) per individual item are published on our website. from FSC-certified forests.

Variations
There can be a variation between the samplematerial and the delivered product.
Stock cuttings are available for approval.

Made in the Netherlands. 67-23/24

SASHIKO with 137 cm – 54”
67-1870

tapetex wall materials

67-1871 67-1872

67-1873 67-1874

TARTANO tapetex wall materials

TARTANO TAPETEX wall materials

Sustainability Application
All nonwovens are made out FSC certified woodpulp, FSC A000531, reinforced All wallcoverings must be installed by experienced installation professionals who
with polyester for dimensional stability. In production all energy sources are understand wallcovering use and installation requirements for textile wallcovering.
green, solar, wind or hydro based, and all processes are water based. The
products do not contain PVC, chlorine, plasticizers, heavy metals or harmfull ALL qualities are precision trimmed and the drops must be butt jointed.
dyes. An undiluted premixed heavy duty clear vinyl adhesive, suitable for textile
wallcovering, or Tapetex PRO-1 must be used. Installation advice is supplied with
Surface finish every roll.
A stain repellent finish prevents water based splashes penetrating and staining
the material. Such a splash will simply bead up on the surface and then, by Caution
gentle blotting with an absorbent tissue. Take care not to rub the surface as this After hanging 3 lengths, check for any defects. If there is a problem contact your
may push the liquid into the material and create a stain. Once a stain has been supplier immediately. We cannot accept any claims on labour or material after more
allowed to dry, it is virtually impossible to remove. Periodic vacuuming is than three lengths have been cut and applied.
recommended to prevent dust from building up on the products surface.
These wall materials are decorative products, not technical products, and intended for
Permeability / Breathability interior use. Do not apply in wet spaces, such as bathrooms.
Walls must not by subject to moisture accumulation restricting the escape of
moisture and increasing the risk of mold growth. Permeability is a measure of Delivery
the amount of water vapour (moisture) that can pass through the wallcovering in From stock by the full linear meter or linear yard.
a certain amount of time. with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with lower Perm Specification Tartano
levels. a copy of the test report as per ASTM E96-12, is available on reguest. Name 137 cm – 54”
Width approx.
Indoor air quality Weight approx. gr / lm : 360
A copy of the UL Environment test report as per ASTM D5116, D6196 and oz / inyd : 11.6
D5197 is available on request. The data indicate the Level of emissions from the Composition woodpulp : 60%
designated product and how they compare to the emission criteria of the polyester : 40%
Gruinard IAQ standard. Repeat sisal : -

Fire rating Hanging height : 17.1 cm -6.7”
ASTM E84 Class A and Euroclass fire rated. Reports. are available on request. width : 34.2 cm – 13.5”
The fire rating should not be construed to indicate hazards presented under repeat
actual fire conditions. use a rubber roller instead of a spatula

Lightfastness and LRV rating Forest Stewardship Council
All qualities are tested for lightfastness as per I.S.O. 105-B02: 2014, Heraeus
original Hanau Xenotest 150S.The lightfastness and the LRV rating (Light The woodpulp used in this collection is made of wood
Reflectance Value) per individual item are published on our website. from FSC-certified forests.

Variations
There can be a variation between the samplematerial and the delivered product.
Stock cuttings are available for approval.

Made in the Netherlands. 67-20/24

TARTANO with 137 cm – 54”
67-1840

tapetex wall materials

67-1841 67-1842

67-1843 67-1844

TERRAL tapetex wall materials

TERRAL TAPETEX wall materials

Sustainability Application
All nonwovens are made out FSC certified woodpulp, FSC A000531, reinforced All wallcoverings must be installed by experienced installation professionals who
with polyester for dimensional stability. In production all energy sources are understand wallcovering use and installation requirements for textile wallcovering.
green, solar, wind or hydro based, and all processes are water based. The
products do not contain PVC, chlorine, plasticizers, heavy metals or harmfull ALL qualities are precision trimmed and the drops must be butt jointed.
dyes. An undiluted premixed heavy duty clear vinyl adhesive, suitable for textile
wallcovering, or Tapetex PRO-1 must be used. Installation advice is supplied with
Surface finish every roll.
A stain repellent finish prevents water based splashes penetrating and staining
the material. Such a splash will simply bead up on the surface and then, by Caution
gentle blotting with an absorbent tissue. Take care not to rub the surface as this After hanging 3 lengths, check for any defects. If there is a problem contact your
may push the liquid into the material and create a stain. Once a stain has been supplier immediately. We cannot accept any claims on labour or material after more
allowed to dry, it is virtually impossible to remove. Periodic vacuuming is than three lengths have been cut and applied.
recommended to prevent dust from building up on the products surface.
These wall materials are decorative products, not technical products, and intended for
Permeability / Breathability interior use. Do not apply in wet spaces, such as bathrooms.
Walls must not by subject to moisture accumulation restricting the escape of
moisture and increasing the risk of mold growth. Permeability is a measure of Delivery
the amount of water vapour (moisture) that can pass through the wallcovering in From stock by the full linear meter or linear yard.
a certain amount of time. with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with lower Perm Specification Terral
levels. a copy of the test report as per ASTM E96-12, is available on reguest. Name 137 cm – 54”
Width approx.
Indoor air quality Weight approx. gr / lm : 360
A copy of the UL Environment test report as per ASTM D5116, D6196 and oz / inyd : 11.6
D5197 is available on request. The data indicate the Level of emissions from the Composition woodpulp : 70%
designated product and how they compare to the emission criteria of the polyester : 20%
Gruinard IAQ standard. Repeat sisal : 10%

Fire rating Hanging height : -
ASTM E84 Class A and Euroclass fire rated. Reports. are available on request. width : -
The fire rating should not be construed to indicate hazards presented under random
actual fire conditions.
Forest Stewardship Council
Lightfastness and LRV rating
All qualities are tested for lightfastness as per I.S.O. 105-B02: 2014, Heraeus The woodpulp used in this collection is made of wood
original Hanau Xenotest 150S.The lightfastness and the LRV rating (Light from FSC-certified forests.
Reflectance Value) per individual item are published on our website.

Variations
There can be a variation between the samplematerial and the delivered product.
Stock cuttings are available for approval.

Made in the Netherlands. 67-10/24

TERRAL with 137 cm – 54”
67-1740

tapetex wall materials

67-1741 67-1742 67-1743

67-1744 67-1745 67-1746

67-1747 67-1748 67-1749

TIFFANY tapetex wall materials

TIFFANY TAPETEX wall materials

Sustainability Application
All nonwovens are made out FSC certified woodpulp, FSC A000531, reinforced All wallcoverings must be installed by experienced installation professionals who
with polyester for dimensional stability. In production all energy sources are understand wallcovering use and installation requirements for textile wallcovering.
green, solar, wind or hydro based, and all processes are water based. The
products do not contain PVC, chlorine, plasticizers, heavy metals or harmfull ALL qualities are precision trimmed and the drops must be butt jointed.
dyes. An undiluted premixed heavy duty clear vinyl adhesive, suitable for textile
wallcovering, or Tapetex PRO-1 must be used. Installation advice is supplied with
Surface finish every roll.
A stain repellent finish prevents water based splashes penetrating and staining
the material. Such a splash will simply bead up on the surface and then, by Caution
gentle blotting with an absorbent tissue. Take care not to rub the surface as this After hanging 3 lengths, check for any defects. If there is a problem contact your
may push the liquid into the material and create a stain. Once a stain has been supplier immediately. We cannot accept any claims on labour or material after more
allowed to dry, it is virtually impossible to remove. Periodic vacuuming is than three lengths have been cut and applied.
recommended to prevent dust from building up on the products surface.
These wall materials are decorative products, not technical products, and intended for
Permeability / Breathability interior use. Do not apply in wet spaces, such as bathrooms.
Walls must not by subject to moisture accumulation restricting the escape of
moisture and increasing the risk of mold growth. Permeability is a measure of Delivery
the amount of water vapour (moisture) that can pass through the wallcovering in From stock by the full linear meter or linear yard.
a certain amount of time. with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with lower Perm Specification Tiffany
levels. a copy of the test report as per ASTM E96-12, is available on reguest. Name 137 cm – 54”
Width approx. gr / lm : 470
Indoor air quality Weight approx. oz / inyd : 15.2
A copy of the UL Environment test report as per ASTM D5116, D6196 and woodpulp : 70%
D5197 is available on request. The data indicate the Level of emissions from the Composition polyester : 30%
designated product and how they compare to the emission criteria of the sisal : -
Gruinard IAQ standard. Repeat height : 42.6 cm – 168”
width : -
Fire rating Hanging on repeat
ASTM E84 Class A and Euroclass fire rated. Reports. are available on request.
The fire rating should not be construed to indicate hazards presented under use a rubber roller instead of a spatula
actual fire conditions.
Forest Stewardship Council
Lightfastness and LRV rating
All qualities are tested for lightfastness as per I.S.O. 105-B02: 2014, Heraeus The woodpulp used in this collection is made of wood
original Hanau Xenotest 150S.The lightfastness and the LRV rating (Light from FSC-certified forests.
Reflectance Value) per individual item are published on our website.

Variations
There can be a variation between the samplematerial and the delivered product.
Stock cuttings are available for approval.

Made in the Netherlands. 67-15/24

TIFFANY with 137 cm – 54”
67-1790

tapetex wall materials

67-1791 67-1792

67-1793 67-1794

TUSCANY tapetex wall materials

TUSCANY TAPETEX wall materials

Sustainability Application
All nonwovens are made out FSC certified woodpulp, FSC A000531, reinforced All wallcoverings must be installed by experienced installation professionals who
with polyester for dimensional stability. In production all energy sources are understand wallcovering use and installation requirements for textile wallcovering.
green, solar, wind or hydro based, and all processes are water based. The
products do not contain PVC, chlorine, plasticizers, heavy metals or harmfull ALL qualities are precision trimmed and the drops must be butt jointed.
dyes. An undiluted premixed heavy duty clear vinyl adhesive, suitable for textile
wallcovering, or Tapetex PRO-1 must be used. Installation advice is supplied with
Surface finish every roll.
A stain repellent finish prevents water based splashes penetrating and staining
the material. Such a splash will simply bead up on the surface and then, by Caution
gentle blotting with an absorbent tissue. Take care not to rub the surface as this After hanging 3 lengths, check for any defects. If there is a problem contact your
may push the liquid into the material and create a stain. Once a stain has been supplier immediately. We cannot accept any claims on labour or material after more
allowed to dry, it is virtually impossible to remove. Periodic vacuuming is than three lengths have been cut and applied.
recommended to prevent dust from building up on the products surface.
These wall materials are decorative products, not technical products, and intended for
Permeability / Breathability interior use. Do not apply in wet spaces, such as bathrooms.
Walls must not by subject to moisture accumulation restricting the escape of
moisture and increasing the risk of mold growth. Permeability is a measure of Delivery
the amount of water vapour (moisture) that can pass through the wallcovering in From stock by the full linear meter or linear yard.
a certain amount of time. with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with lower Perm Specification Tuscany
levels. a copy of the test report as per ASTM E96-12, is available on reguest. Name
Width approx. 137 cm – 54”
Indoor air quality Weight approx. gr / lm : 220
A copy of the UL Environment test report as per ASTM D5116, D6196 and oz / inyd : 7.1
D5197 is available on request. The data indicate the Level of emissions from the Composition woodpulp : 70%
designated product and how they compare to the emission criteria of the polyester : 30%
Gruinard IAQ standard. Repeat
sisal : -
Fire rating Hanging height : -
ASTM E84 Class A and Euroclass fire rated. Reports. are available on request. width : -
The fire rating should not be construed to indicate hazards presented under random
actual fire conditions.
Forest Stewardship Council
Lightfastness and LRV rating
All qualities are tested for lightfastness as per I.S.O. 105-B02: 2014, Heraeus The woodpulp used in this collection is made of wood
original Hanau Xenotest 150S.The lightfastness and the LRV rating (Light from FSC-certified forests.
Reflectance Value) per individual item are published on our website.

Variations
There can be a variation between the samplematerial and the delivered product.
Stock cuttings are available for approval.

Made in the Netherlands. 67-2/24

TUSCANY with 137 cm – 54”
67-1660

tapetex wall materials

67-1661 67-1662 67-1663

67-1664 67-1665 67-1666

67-1667 67-1668 67-1669

VENETIAN tapetex wall materials

VENETIAN TAPETEX wall materials

Sustainability Application
All nonwovens are made out FSC certified woodpulp, FSC A000531, reinforced All wallcoverings must be installed by experienced installation professionals who
with polyester for dimensional stability. In production all energy sources are understand wallcovering use and installation requirements for textile wallcovering.
green, solar, wind or hydro based, and all processes are water based. The
products do not contain PVC, chlorine, plasticizers, heavy metals or harmfull ALL qualities are precision trimmed and the drops must be butt jointed.
dyes. An undiluted premixed heavy duty clear vinyl adhesive, suitable for textile
wallcovering, or Tapetex PRO-1 must be used. Installation advice is supplied with
Surface finish every roll.
A stain repellent finish prevents water based splashes penetrating and staining
the material. Such a splash will simply bead up on the surface and then, by Caution
gentle blotting with an absorbent tissue. Take care not to rub the surface as this After hanging 3 lengths, check for any defects. If there is a problem contact your
may push the liquid into the material and create a stain. Once a stain has been supplier immediately. We cannot accept any claims on labour or material after more
allowed to dry, it is virtually impossible to remove. Periodic vacuuming is than three lengths have been cut and applied.
recommended to prevent dust from building up on the products surface.
These wall materials are decorative products, not technical products, and intended for
Permeability / Breathability interior use. Do not apply in wet spaces, such as bathrooms.
Walls must not by subject to moisture accumulation restricting the escape of
moisture and increasing the risk of mold growth. Permeability is a measure of Delivery
the amount of water vapour (moisture) that can pass through the wallcovering in From stock by the full linear meter or linear yard.
a certain amount of time. with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with lower Perm Specification Venetian
levels. a copy of the test report as per ASTM E96-12, is available on reguest. Name
Width approx. 137 cm – 54”
Indoor air quality Weight approx. gr / lm : 440
A copy of the UL Environment test report as per ASTM D5116, D6196 and oz / inyd : 14.2
D5197 is available on request. The data indicate the Level of emissions from the Composition woodpulp : 70%
designated product and how they compare to the emission criteria of the polyester : 30%
Gruinard IAQ standard. Repeat
sisal : -
Fire rating Hanging height : 25.6 cm – 10.1”
ASTM E84 Class A and Euroclass fire rated. Reports. are available on request. width : 23.0 cm – 9.1”
The fire rating should not be construed to indicate hazards presented under on repeat
actual fire conditions.
use a rubber roller instead of a spatula
Lightfastness and LRV rating Solid colours see Orienta 67-1710/1719
All qualities are tested for lightfastness as per I.S.O. 105-B02: 2014, Heraeus
original Hanau Xenotest 150S.The lightfastness and the LRV rating (Light Forest Stewardship Council
Reflectance Value) per individual item are published on our website.
The woodpulp used in this collection is made of wood
Variations from FSC-certified forests.
There can be a variation between the samplematerial and the delivered product.
Stock cuttings are available for approval.

Made in the Netherlands. 67-9/24

VENETIAN with 137 cm – 54”
67-1730

tapetex wall materials

67-1731 67-1732

67-1733 67-1734

ZAGARA tapetex wall materials

ZAGARA TAPETEX wall materials

Sustainability Application
All nonwovens are made out FSC certified woodpulp, FSC A000531, reinforced All wallcoverings must be installed by experienced installation professionals who
with polyester for dimensional stability. In production all energy sources are understand wallcovering use and installation requirements for textile wallcovering.
green, solar, wind or hydro based, and all processes are water based. The
products do not contain PVC, chlorine, plasticizers, heavy metals or harmfull ALL qualities are precision trimmed and the drops must be butt jointed.
dyes. An undiluted premixed heavy duty clear vinyl adhesive, suitable for textile
wallcovering, or Tapetex PRO-1 must be used. Installation advice is supplied with
Surface finish every roll.
A stain repellent finish prevents water based splashes penetrating and staining
the material. Such a splash will simply bead up on the surface and then, by Caution
gentle blotting with an absorbent tissue. Take care not to rub the surface as this After hanging 3 lengths, check for any defects. If there is a problem contact your
may push the liquid into the material and create a stain. Once a stain has been supplier immediately. We cannot accept any claims on labour or material after more
allowed to dry, it is virtually impossible to remove. Periodic vacuuming is than three lengths have been cut and applied.
recommended to prevent dust from building up on the products surface.
These wall materials are decorative products, not technical products, and intended for
Permeability / Breathability interior use. Do not apply in wet spaces, such as bathrooms.
Walls must not by subject to moisture accumulation restricting the escape of
moisture and increasing the risk of mold growth. Permeability is a measure of Delivery
the amount of water vapour (moisture) that can pass through the wallcovering in From stock by the full linear meter or linear yard.
a certain amount of time. with high Perm levels, such as all qualities in this
book, will allow more moisture to pass through than those with lower Perm Specification Zagara
levels. a copy of the test report as per ASTM E96-12, is available on reguest. Name
Width approx. 137 cm – 54”
Indoor air quality Weight approx. gr / lm : 260
A copy of the UL Environment test report as per ASTM D5116, D6196 and oz / inyd : 8.4
D5197 is available on request. The data indicate the Level of emissions from the Composition woodpulp : 70%
designated product and how they compare to the emission criteria of the polyester : 30%
Gruinard IAQ standard. Repeat
sisal : -
Fire rating Hanging height : -
ASTM E84 Class A and Euroclass fire rated. Reports. are available on request. width : -
The fire rating should not be construed to indicate hazards presented under random
actual fire conditions.
Forest Stewardship Council
Lightfastness and LRV rating
All qualities are tested for lightfastness as per I.S.O. 105-B02: 2014, Heraeus The woodpulp used in this collection is made of wood
original Hanau Xenotest 150S.The lightfastness and the LRV rating (Light from FSC-certified forests.
Reflectance Value) per individual item are published on our website.

Variations
There can be a variation between the samplematerial and the delivered product.
Stock cuttings are available for approval.

Made in the Netherlands. 67-22/24

ZAGARA with 137 cm – 54”
67-1860

tapetex wall materials

67-1861 67-1862 67-1863

67-1864 67-1865 67-1866

67-1867 67-1868 67-1869