The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.
Discover the best professional documents and content resources in AnyFlip Document Base.
Search
Published by donny, 2018-10-25 04:27:06

HF BOOK

Copyright © 2018 Leader Healthcare
147
2277 Redondo Ave, Signal Hill, CA 90755, USA Phone: (800) 603-4996 (562) 597-0102
Fax: (562) 597-0148 www.edgeforlife.com
Made in the USA


148
Copyright © 2018 Leader Healthcare
P/N: 19695-A Rev. 4/18/2016
ELITETM
User Guide


AH
HYDRAFACIAL MD® ELITETM User Guide
Copyright © 2016 Edge Systems LLC. All rights reserved.
Terms and Conditions of Use:
HydraFacial®, HydraFacial MD®, Nectre®, Vortex-Fusion®, UV Smart®, Britenol®, and HydroPeel® are registered trademarks. HydraFacial MD® EliteTM, Activ-4TM, Beta-HDTM, Antiox-6TM, Antiox+TM, GlySalTM, DermaBuild- erTM, RinseawayTM, CTGFTM, Vortex-ExfoliationTM, Vortex-CleansingTM, Vor- tex-ExtractionTM, Vortex-BoostTM, My Life, My Time, My SkinTM, and Skin Health For LifeTM are trademarks of Edge Systems. This product and its use are covered by one or more U.S. and International patents. Patent info: www.edgeforlife.com/patents. These intellectual property rights (IPR’s) re- main the exclusive property of Edge Systems or its licensors. This product sold is subject to a license to use the IPRs only in conjunction with original Edge Systems products. Use of Edge Systems together with non-original Edge Systems products, including but not lim- ited to treatment media, serums and solutions, is a breach of the license - to only use any Edge Sys- tem device together with original Edge Systems products - and constitutes an infringement of IPRs.
Contact Info:
Edge Systems LLC
2277 Redondo Avenue Signal Hill, CA 90755 USA Ph: 1-562/597-0102 or 800-603-4996
Fax: 1-562-597-0148
Email: [email protected] http://www.edgeforlife.com
Copyright © 2018 Leader Healthcare
2
149


S
CONTENTS
150
Copyright © 2018 Leader Healthcare
3
HYDRAFACIAL MD® ELITETM User Guide
Contents
4 Before You Start
4 Introduction
5 Safety Information
12 Getting Started
13 Package Contents
14 Device Components
15 Installation
15 • Tool Holder
15 • Waste Container
15 • HydraFacial® Handpiece
16 • HydroPeel® Tip
16 • Specialty Vial
17 • Skin Solutions
18 • Optional Components
20 Operating Instructions
20 • On/Off, Standby, and Sleep Modes
21 • Touchscreen
21 • Adjust Fluid Flow
21 • Adjust Vacuum Strength
22 • Activate LED Lights (optional)
22 • Skin Imaging Camera (optional)
23 System Cleaning & Preventive Maintenance
23 • After Each Service
23 • Weekly Cleaning
24 • HydraFacial® Handpiece
26 • Waste Container 26 • Touchscreen
26 • Removable Front Door
27 • Wet Diamond Aggressive Abrasion (Medical Use Only)
28 • Mechanical Lymphatic Drainage Therapy Handpieces (optional)
28 • LED Light Therapy Handpieces (optional) 28 • Skin Imaging Camera (optional)
34 Appendix: Client Questionnaire & Consent Form
29 Troubleshooting 32 Limited Warranty


BEFORE YOU START
AH
Copyright © 2018 Leader Healthcare
151
4
HYDRAFACIAL MD® ELITETM User Guide
INTRODUCTION
Thank you for purchasing the HydraFacial MD® EliteTM System, a revolu- tionary breakthrough in aesthetic technology! The HydraFacial® is the next generation of exfoliation and skin rejuvenation done simultaneous- ly. The process removes dead skin cells and impurities while simultane- ously Vortex-FusingTM the underlying new skin with cleansing, hydrating and moisturizing skin solutions and antioxidants. The procedure is soothing, refreshing, non-irritating and very e ective. You can have the utmost con dence in this leading-edge system manufactured in the USA by Edge Systems LLC.
The HydraFacial MD® EliteTM may include other modes of operation in addition to the HydraFacial® mode. The system, with all of its optional modes, is intended for use in hospitals, clinics, doctor’s o ces, and in aesthetician’s o ces by trained doctors and/or licensed aestheticians (Please consult your state board for regulations). The following is a tech- nical description of the unit purchased and the intended use.
HydraFacial® mode: The HydraFacial MD® EliteTM system is a USA Food and Drug Administration (FDA) listed Class I exempt medical device; Class II medical device in Canada. Its intended use is to abrade the up- per layers of the skin by operator controlled motion, in order to smooth the skin surface and improve the appearance of skin, i.e. ne lines and wrinkles. An additional feature is the capability of introducing topical skin solutions during the procedure.
SYSTEM SPECIFICATIONS (EliteTM P/N 70143-03): 1. UnitSize:4’(H)x18”(W)x16”(D)
2. Unit Weight: 85 lbs.
3. Electrical: 110-120 VAC, 60 Hz, 8 Amp
Environmental Conditions:
Temperature: Normal (10-40o C) Relative Humidty: 30-75% RH Altitude: 700-1060 hPa


S
BEFORE YOU START
HYDRAFACIAL MD® ELITETM User Guide
Type BF Applied Part. De brillation proof.
Type BF. De brillation Beweis.
BF Pièce appliquée de type. Dé brillation preuve.
Direct Current Gleichstrom Courant continu
Alternating Current Wechselstrom Courant alternatif
ON (Power)
EIN (Stromversorgung) ALLUME (Alimentation)
OFF (Power)
AUS (Stromversorgung) ETEINT (Alimentation)
STANDBY (Power)
STANDBY (Stromversorgung) PAUSE (Alimentation)
Operating Instructions Bedienungsanleitung Mode d'emploi
Fuse Sicherung Fusible
Pushing Prohibited Drücken ist untersagt Interdiction de pousser
Certi ed by CSA Group Zerti ziert von der CSA-Gruppe Certi é par CSA Group
Connect to supply mains with protective earth (ground) Zum Versorgungsnetz durch eine Schutzerdung anschließen Connectez au secteur, avec protection mise à la terre
152
Copyright © 2018 Leader Healthcare
SAFETY INFORMATION
PRODUCT MARKING SYMBOLS
Symbol
Description
Attention: Refer to accompanying documentation. Aufmerksamkeit: Beziehen Sie sich begleitend auf Dokumentation. Attention : Consultez la documentation d’accompagnement.
Separate collection for electronic. Trennen Sie Sammlung für elektronisch. Collecte sélective pour l’électronique.
5


BEFORE YOU START
A
Copyright © 2018 Leader Healthcare
153
6
HYDRAFACIAL MD® ELITETM User Guide
CAUTION AND MARKING SYMBOLS
Symbol
Description
Calls attention to a procedure, practice, or condition that could possibly cause bodily injury or death.
Ruft Aufmerksamkeit zu einem Verfahren, Praxis, oder Bedingung, die vielleicht körperliche Verletzung oder Tod verursachen könnte. Une attention particulière doit être portée à une procédure, pratique ou condition qui pourrait causer des blessures corporelles ou la mort.
Calls attention to a procedure, practice, or condition that could possibly cause damage to equipment or permanent loss of data. Ruft Aufmerksamkeit zu einem Verfahren, Praxis, oder Bedingung, die vielleicht Schaden an Ausrüstungen oder permanentem Verlust der Daten verursachen könnte.
Une attention particulière doit être portée à une procédure, pratique ou condition qui pourrait causer des dommages à l’appareil ou la perte permanente de données.
Do Not Re-use
Nicht wieder verwenden Ne pas réutiliser
Manufactured by Hergestellt von Fabriqué par
Keep dry Bleib trocken Garder au sec


RT
APPENDICES
154
Copyright © 2018 Leader Healthcare
35
HYDRAFACIAL MD® ELITETM User Guide
Specify your areas of concern (i.e. eyes, forehead, etc.) _________________ _______________________________________________________________________ _______________________________________________________________________
SECTION 2: CLIENT CONSENT FORM
(Initial each acknowledgement line below)
1. I acknowledge that my skin might experience temporary irritation, tightness, or redness, which usually dissipates within 72 hours de- pending on skin sensitivity. _____(initial here)
2. I acknowledge that if I fail to use a minimal sunscreen (SPF 30) and follow the direction for use, I am more susceptible to sunburn, sun damage & hyperpigmentation. I should avoid excessive sun exposure, especially between 10am - 2pm. _____(initial here)
3. I have disclosed my history of allergies above and I acknowledge that if I am allergic to one or more of the ingredients in the products used, I may experience an allergic reaction. _____(initial here)
4. I hereby agree to have the treatment performed and agree to follow all pre and post treatment instructions. _____(initial here)
5. I acknowledge that I should avoid use of aggressive exfoliation, waxing, and products containing acids that are not part of the rec- ommended take-home regimen in the treated areas for minimum 2 weeks pre and post treatment. _____(initial here)
6. I acknowledge that I should avoid use of Retin-A type products for a period of time recommended by my physician and/or skincare practi- tioner pre and post the treatment. _____(initial here)
7. I acknowledge that I have answered all questions truthfully and completely. _____(initial here)
8. I release Edge Systems, the ______________ (Aesthetician/Doctor), management and sta of_______________ (Clinic/O ce) from any and all liability associated with any injuries and/or current orfuture condi- tions resulting from the skincare procedures or products. _____(initial here)
9. I consent to the use of my before, during and after facial procedure photographs for education, promotion or advertising purposes. My name will not be used to identify these photographs without my writ- ten approval. _____(initial here)
By signing below, I certify that I have read and fully understood the con- tents of this consent form, and that the information I provided above are complete, accurate, and up-to-date to my knowledge.
Client Signature: _________________________________ Date: _______________ Operator Signature: _______________________________Date: _______________


APPENDICES
Copyright © 2018 Leader Healthcare
155
34
HYDRAFACIAL MD® ELITETM User Guide
CLIENT CONSULTATION AND RELEASE FORM
Please read carefully, complete, sign and date this form prior to your procedure.
Name: _______________________________________________________________ Phone: (______)_______________________________________________________ Address: ____________________________________________________________ City: ___________________________ State: ______ Zip: __________________ Email: ______________________________________________________________
HydraFacial® LYMPHATIC/MASSAGE THERAPY MICRODERMABRASION
SECTION 1: MEDICAL INFORMATION
Absolute Contraindications
BLUE/RED LIGHT THERAPY
WET DIAMOND (Medical Use Only)
YES NO
Accutane or other similar medication
Autoimmune disease, HIV, lupus, hepatitis, scleroderma Active infection in the treatment area
Melanoma or lesions suspected of malignancy
Active Sunburn
Pregnancy (medical-legal)
Breastfeeding (medical-legal, may increase skin sensitivity & likelihood of PIH
Epilepsy contraindicated for LED light therapy
Relative Contraindications
Anticoagulants therapy (use lower settings)
Very thin skin
Other Aesthetic Treatments: Botox: wait 5-7 days; Fillers: wait 7-10 days; Peels: wait 30 days
Laser Treatments: wait until lesions heal & swelling & redness is resolved
Other Concerns
Keloids: avoid direct contact
Rosacea, telangiectasia (use lower vacuum) Unrealistic expectations
If you answered YES to any of the above questions, please explain: ________________________________________________________________________ ______________________________________________________________________
Please list any known allergies: ________________________________________________________________________


S
156
Copyright © 2018 Leader Healthcare
7
HYDRAFACIAL MD® ELITETM User Guide
SAFETY GUIDELINES
1. Ensure that all operators of the HydraFacial® System are trained and licensed as required by the state or country. Do not operate the unit before being trained. For any questions regarding training, call your salesperson or Edge Systems.
2. Be sure to read the User Guide thoroughly before setting up the system. If you experience mechanical and/or electrical di culties with your unit, call Edge Systems Service Department at 800-603- 4996.
3. Always use a clean tip for each procedure. The HydroPeel® tips are for single use only. Use for more than one procedure may result in infection.
4. Reusing contaminated skin solution can cause harm to the client and will void all warranties.
5. Skin solutions should not exceed the “Use By” date on the bottle. Should any products (skin solutions) settle, please contact your dis- tributor or Edge Systems.
6. In the event that a client experiences irritation, discontinue the use of the skin solution immediately.
7. Always do a client consultation (see Appendix for example) to determine if the client is a candidate for the procedure. Follow contra- indication list as pre-determination for procedure.
8. Always begin procedure conservatively. Follow recommended protocols and contraindications for skin type. Each client’s skin condi- tions and sensitivity are di erent and suggested settings will vary
for each client. Do a sensitivity test on the neck by the earlobe and increase or decrease the vacuum level as required. Skin conditions re- quiring more aggressive vacuum settings are at operator’s discretion.
9. Do not work on sensitive areas such as the eyelids. Eyelids should be closed at all times during the procedure and covered with protective eyewear or damp cotton pads. Sterile eye rinse solution should be available at all times to rinse the eyes.
10. Removing contact lenses prior to procedure is recommended.


BEFORE YOU START LI
H
W
T D B P C I F O R B E N A ( D O T E T O O L N F I A P L O A
H
T S t a t d e
E 2 S P F
Copyright © 2018 Leader Healthcare
157
8
HYDRAFACIAL MD® ELITETM User Guide
11. The client should have a minimum sunscreen SPF 30 applied after the procedure and should use sunscreen on an ongoing basis. Use of Edge Systems’ UV Smart® Daily sunscreen is highly recommended.
12. Empty the waste container after each service according to your waste handling protocol. Follow the system cleaning instructions in this guide to clean your machine and handpiece after each procedure.
13. Only Edge Systems skin solutions should be suctioned through the HydraFacial® handpiece. Use of other, non-approved skin solutions will void the warranty and clog the machine. Always use solution when performing abrasion.
14. Keep the device in accordance to recommended environmental conditions indicated on page 5 of this manual. Liquid should only be suctioned through the HydraFacial® handpiece.
15. Not recommended for severe acne scarring.
Equipment not suitable for use in the presence of a ammable anesthet- ics mixture with air or with oxygen or Nitrous Oxide.
Ausrüstungen die nicht sind passend für Gebrauch in der Anwesenheit von einer brennbaren Narkosenmischung mit Luft oder mit Sauersto oder Sticksto oxyd.
L’appareil n’est pas destiné à être utilisé en présence d’un mélange anes- thésique in ammable avec de l’air, de l’oxygène ou de l’oxyde nitreux.
Equipment is not intended to be used in an oxygen-rich environment.
Die Geräte sind nicht zum Einsatz in einer sauersto reichen Umgebung bestimmt.
L'équipement ne doit pas être utilisé dans un environnement riche en oxygène.
Unauthorized user modi cations will void warranty. Edge Systems LLC will not be responsible for any injuries sustained due to unauthorized equipment modi cations or use of parts not speci ed by Edge Systems LLC. Equipment returned to Edge Systems LLC with unsafe modi cations will be returned to their original operating condition at the customer’s expense.


RT LIMITED WARRANTY
158
Copyright © 2018 Leader Healthcare
Edge Systems LLC
2277 Redondo Avenue
Signal Hill, CA 90755
Ph: 1-562-597-0102 or 800-603-4996 Fax: 1-562-597-0148
33
HYDRAFACIAL MD® ELITETM User Guide
What is Not Covered:
THIS WARRANTY DOES NOT COVER ANY EQUIPMENT WHICH HAS BEEN DAMAGED BY ACCIDENT, MISUSE, ABUSE, MODIFICATION, WHICH HAS BEEN USED IN VIOLATION OF THE SYSTEM INSTRUCTIONS OR FOR ANY PURPOSE OTHER THAN ONE FOR WHICH IT WAS MANUFACTURED, OR CAUSED BY UNAUTHORIZED REPAIR OR USE OF UNAUTHORIZED PARTS, INCLUDING, WITHOUT LIMITATION, DAMAGE TO THE SYSTEM ARISING FROM USE OF SKIN SOLUTIONS OR TIPS PURCHASED OR OTHERWISE OBTAINED FROM A NONEDGE SYSTEMS APPROVED SUPPLIER. THIS WAR- RANTY DOES NOT COVER FREIGHT DAMAGE; OR ANY DAMAGE CAUSED BY ACTS OF GOD OR THIRD PARTIES NOT WITHIN THE CONTROL OF EDGE SYSTEMS, SUCH AS DAMAGE CAUSED BY POWER SURGES OR LIGHT- NING. THIS WARRANTY DOES NOT COVER THE COSTS OF INSTALLATION, ADJUSTMENT OF USER CONTROLS, INITIAL TECHNICAL ADJUSTMENT (SET-UP) AND ROUTINE USER REQUIRED MAINTENANCE. THIS WARRANTY DOES NOT EXTEND TO ANY MACHINERY, APPLIANCES OR PROPERTY
OF THE CUSTOMER USED IN CONJUNCTION WITH OR CONNECTED TO THE EQUIPMENT. THIS WARRANTY IS THE EXCLUSIVE REMEDY AGAINST EDGE SYSTEMS AND NO OTHER REMEDY (INCLUDING BUT NOT LIMITED TO INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR INJURY TO PERSON OR PROPERTY, LOST PROFITS, LOST SALES OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL LOSS) SHALL BE AVAILABLE. THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ANY REPRESENTATIONS OR PROM- ISES INCONSISTENT WITH OR IN ADDITION TO THIS LIMITED WARRANTY ARE UNAUTHORIZED AND SHALL NOT BE BINDING UPON EDGE SYSTEMS. PLEASE NOTE THAT SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
How to Obtain Service:
To obtain Service under this warranty, the Customer must contact Edge Systems within the warranty period. Edge Systems can be reached by telephone (toll free) at 1 800-603-4996. The Customer is responsible for all arrangements and shipping charges (incoming and outgoing) related to the shipment of a System or parts to a Edge Systems approved and designated repair facility for inspection and diagnosis for potential cov- erage under this warranty.


LIMITED WARRANTY BE
H
V G V o L m O b
D a
c s L n
D o
M K w b
N c ’
T
n d
m m
Copyright © 2018 Leader Healthcare
159
32
l
f
l t
l
r i
HYDRAFACIAL MD® ELITETM User Guide
LIMITED WARRANTY
Form of Product Warranty LIMITED WARRANTY (HydraFacial® SYSTEM)
What is Covered:
The warranty for the HydraFacial® System (the “System”) covers defects in material or workmanship in the System.
Who is Covered:
This limited warranty applies and extends only to the original Customer purchasing the System from Edge Systems in the country where the sale occurred. This limited warranty is non-transferable and non-assignable by the original Customer. Edge Systems shall have no obligations under this limited warranty in the event that an original Customer attempts
an unpermitted assignment of the original Customer’s rights under this limited warranty. Notwithstanding the foregoing, Edge Systems agrees to extend the bene ts of this limited warranty to a leasing company pro- viding nancing to the original Customer for the System, provided the System is leased back to and operated by the original Customer and any such leasing company has no greater rights than the original Customer.
How Long:
The System warranty runs for a period of one (1) year from the date of delivery of the System to the original Customer. We warrant any replace- ment part for the balance of the original warranty period. Extended war- ranties are available.
What Edge Systems Will Do:
For the System, Edge Systems will, within the applicable warranty pe- riod, at Edge Systems ‘s sole option, repair or replace any defects in the System without any costs to the Customer for parts or labor (except as speci cally stated below).
Service Loaner:
During the rst year of warranty Edge Systems, to the extent available, will provide to Customer a loaner System (the “Loaner”) upon determi- nation that the failure is a warrantied event, and following execution of Edge Systems’ Loaner Agreement. Loaner systems are not available outside the United States.


TY BEFORE YOU START
160
Copyright © 2018 Leader Healthcare
9
HYDRAFACIAL MD® ELITETM User Guide
Verbraucheränderungen Unbefugte Verbraucheränderungen werden Garantie aufheben. Edge Systems LLC wird verantwortlich für irgendeine Verletzungen nicht sein, die auf Grund unbefugter Geräteänderungen oder Gebrauchs der Teile gestützt werden, die nicht von Edge Systems LLC angegeben werden. Ausrüstungen sind schieben Systemgesellschaft mit nicht sicheren Änderungen wird zurückgekehrt werden zu ihrem Original zurückgekehrt, das Bedingung an der Ausgabe des Kunden bedient.
Des modi cations non autorisées e ectuées par l’utilisateur annuleront la garantie. Edge Systems LLC ne sera pas responsable de toute blessure causée à la suite de modi cations non autorisées sur l’appareil ou à la suite d’une utilisation de pièces non spéci ées par Edge Systems LLC. L’appareil qui est retourné à Edge Systems LLC avec des modi cations non sécuritaires sera ramené à son état de fonctionnement initial aux frais du client.
DO NOT suction liquids through the dry port for crystal-free procedure located on the side of the unit. This will damage the unit and will void the warranty.
MACHT Saugwirkungs üssigkeiten durch den trockenen Hafen für Kristall frei Behandlung NICHT, die auf der Seite von der Einheit befunden wird. Dies wird die Einheit beschädigen und wird von der Garantie nicht bedeckt.
N’ASPIREZ PAS de liquides par le port de séchage pour le traitement sans cristal situé sur le côté de l’appareil. Ceci entraînera des dommages à l’appareil qui ne sont pas couverts par la garantie.
This equipment has been designed and determined to be compliant with regulatory agency limits for EMI. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference, which can be determined by turning the equip- ment o and on, the interference can be possibly corrected by one or more of the following measures:
- Relocate the equipment with respect to the receiver.
- Move the equipment away from the receiver.
- Plug the equipment into a di erent electrical outlet so that the
equipment and receiver are on di erent branch circuits.


BEFORE YOU START TR
Copyright © 2018 Leader Healthcare
161
10
HYDRAFACIAL MD® ELITETM User Guide
Diese Ausrüstungen sind entworfen worden und sind bestimmt worden, entgegenkommend mit gesetzlichen Agenturengrenzen für EMI zu sein. Jedoch, es gibt keine Garantie, die jene Störung in einer besonderen Installation nicht statt nden wird. Wenn diese Ausrüstungen Störung verursachen, die von Drehen den Ausrüstungen ab und auf bestimmt werden kann, kann die Störung vielleicht von ein oder mehr von den Folgenden Maßnahme korrigiert werden:
- Repositionieren Sie die Ausrüstungen in Bezug auf den Empfänger.
- Bewegen Sie die Ausrüstungen weg vom Empfänger.
- Stöpseln Sie die Ausrüstungen in eine verschiedene Steckdose zu,
damit die Ausrüstungen und der Empfänger auf verschiedenen Zwei genkreisläufen sind.
Cet appareil a été conçu conformément aux limites de l’organisme de réglementation en matière d’interférence électromagnétique. Toutefois, rien ne garantit l’absence d’interférences dans une installation particu- lière. Si cet appareil provoque des interférences, détectables en allumant et en éteignant l’appareil, celles-ci pourront possiblement être corrigées en accomplissant une ou plusieurs des actions suivantes :
-Déplacer l’appareil par rapport au récepteur;
-Éloigner l’appareil du récepteur;
-Brancher l’appareil sur une autre prise de courant pour que l’appareil
et le récepteur soient branchés sur di érents circuits.
To prevent electric shock, do not remove the instrument cover. There are no user serviceable parts inside. Routine maintenance or cleaning of internal parts is not necessary. Avoid the use of cleaning agents or chemicals on the instrument. Some chemicals may damage plastic parts or lettering. Any external cleaning should be done with a clean, dry or slightly damp cloth. Any replacement cables and parts should be ac- quired directly from Edge Systems LLC.
Elektroschock zu verhindern, nimmt die Instrumentdecke nicht heraus. Es gibt keine vom Benutzer haltbaren Teile hinein. Routinewartung oder reinigend von inneren Teilen ist nicht notwendig. Vermeiden Sie den Ge- brauch, um Agenten oder Chemikalien auf dem Instrument zu reinigen. Einige Chemikalien dürfen Kunststo teile oder Beschriftung beschädi- gen. Irgendein äußerlicher Reinigen sollte mit einem sauberen gemacht werden, trocknet oder dämpft etwas Tuch. Irgendeine Ersetzung kabelt und Teile sollten direkt von Edge Systems LLC erlangt werden.


RT TROUBLESHOOTING
162
Copyright © 2018 Leader Healthcare
31
HYDRAFACIAL MD® ELITETM User Guide OPTIONS
Problem
Possible Cause
Solution
Low or No Vacuum Flow for Lymphatic Drainage Handpieces
Kinks or leaks
Check lines for kinks or leaks.
Improper connections
Make sure the dry handpiece tubing assembly and corresponding attach- ments are properly connected.
Occluded lter
If you conduct an excessive number of massage procedures, you may oc- clude lter, which in turn will reduce vacuum performance. Please call your local representative or call Edge Systems to order a replacement part.
LED Light Handpiece Not Working
Improper connection
Make sure the light handpiece is connected to the proper color-coded receptacle.
Unit is not activated
Make sure that you pressed the button for red light or blue light
on the touchscreen to activate the light handpiece. Also make sure you press the button on the back of the handpiece.
LED Light Handpiece Not Working
Refer to LED Light Therapy Handpiece User Guide part number 19692 for troubleshooting solutions.
Camera Not Working
Unit is not on
Check that the cable end connector is securely inserted into the port.
Camera Not Taking Photos
Connection issue
Disconnect the camera, and then reconnect the camera to the unit. Reboot the system.
Unable to Create New Member Pro- le or Store Photos
Out of storage memory
Back up photos on a regular basis with the 32GB USB ash drive pro- vided with the Camera kit option. Go to Settings and select “Photo Backup/Restore.”
Currently Stored Photos Are Erased After Restoring Photos
Restoring photos overrides current photos stored in the system.
Ensure current photos in the system are backed up before restoring previ- ous photos to the system.
Note: Circuit diagrams & component part lists are available upon request for service technicians.


TROUBLESHOOTING BE
H
P l p t c m ê t S
Copyright © 2018 Leader Healthcare
163
30
HYDRAFACIAL MD® ELITETM User Guide
Problem
Possible Cause
Solution
Low or No Fluid Flow
Leak in the line
Check lines for any kinks or leaks. Repuncture bottle if needed.
Too many solu- tion stations are on
Make sure you only have a maximum of two skin solution stations on the “ON” position.
Faulty station
If using only one station at a time, turn current station o and try another station, if this corrects the problem please check on the previ- ous station that internal bottle seal is completely broken and pick up assembly (metal portion) is fully submerged.
Operator technique
Make sure that you are holding the handpiece correctly and not work- ing against gravity or blocking the tubing.
Waste container is full
Do not let the waste container ll above 450ml. If the container becomes overfull, a built-in oat will occlude the vacuum opening and skin solution ow through the hand- piece will cease. Empty the waste container after each service.
Clogging
Flush all stations thoroughly. Make sure the machine is cleaned after each service.
Gray cartridge is loose
Make sure that the gray cartridge is properly inserted into the hand- piece. The arrow on the cartridge should line up with the lock symbol.
Too Much Fluid Flow
Flow control valve is opened too far
Make sure the ow control valve on the handpiece is not open too far. The default setting for
the ow control valve
is 50% open. To de- crease uid ow, turn the ow control valve towards the - sign.


G BEFORE YOU START
164
Copyright © 2018 Leader Healthcare
11
HYDRAFACIAL MD® ELITETM User Guide
Pour prévenir les chocs électriques, n’enlevez pas le couvercle de l’instrument. Ce dernier ne contient aucune pièce pouvant être réparée par l’utilisateur. L’entretien ou le nettoyage périodique des pièces in- ternes n’est pas nécessaire. Évitez l’utilisation de produits nettoyants ou chimiques sur l’instrument. Certains produits chimiques peuvent endom- mager les pièces de plastique ou le lettrage. Tout nettoyage externe doit être fait avec un chi on propre, sec ou légèrement humide. Tout câble et toute pièce de rechange doivent être achetés directement auprès d’Edge Systems LLC.


GETTING STARTED
D
o
u
w u
Copyright © 2018 Leader Healthcare
165
12
HY
TR
Pr
No
To
Lo Fl
HYDRAFACIAL MD® ELITETM User Guide
GETTING STARTED
Packaging & Unpacking Inspection
INSPECT THE SHIPPING CARTON
Your equipment was shipped in a custom foam insulated box that has been tested to UPS standards. If the shipping carton is damaged, inspect the contents for visible damage such as dents, scratches or any other obvious signs of damage. If you see visible damage, make a claim with the carrier immediately. If the equipment is damaged, notify Edge Systems at (800) 603-4996 or (562) 597-0102 and we will assist you in the repair or replacement of your equipment.
Do not return your unit without rst contacting Edge Systems and receiving an RMA (Return Material Authorization) number.
Unpack the unit, accessories and all documents. Retain the original packaging in case you need to ship the unit for any reason. Verify that all appropriate items have been received.
The unit is large & heavy and should not be lifted alone.
Das Gerät ist groß und schwer und sollte nicht ohne Hilfe aufgehoben
werden.
L'appareil est gros et lourd, et ne doit pas être soulevé par une seule personne.


ED
166
Copyright © 2018 Leader Healthcare
29
HYDRAFACIAL MD® ELITETM User Guide
TROUBLESHOOTING
Problem
Possible Cause
Solution
No Power
Power cord
Make sure power cord is properly connected to back of the unit and to a working wall outlet.
Fuses
Unplug unit from main wall out- let prior to this. Use a small at head screwdriver to remove the fuse holder box located in between the ON/OFF switch and power cord, and check that fuses are in good working conditions (not blown).
Touchscreen
Blank screen / No video signal
If the main power is “ON” and the touchscreen is blank, press the power button located on the right hand side of touchscreen. Check video cable connection in the rear.
No image, or inverted image on the screen
Call your local representative or Edge Systems for assistance.
Screen does not respond to touch
Low or No Fluid Flow
Toggle switch
Make sure the switch is on.
Empty bottle
Make sure your skin solution bottle is not empty.
Improper connection
Make sure that your HydraFacial® handpiece is properly connected to the side of the skin solution station block, and to the waste container. Also, make sure that the lid is rmly attached to the waste container.
Tip is improperly installed
Make sure the tip is rmly installed onto the handpiece. Angled tips should face downwards in order to facilitate ow.
Flow control valve is closed
Make sure the ow control valve on the handpiece
is open. To increase uid ow, turn the ow control valve towards
the + sign.


SYSTEM CLEANINGG
Copyright © 2018 Leader Healthcare
167
28
HYDRAFACIAL MD® ELITETM User Guide
MECHANICAL LYMPHATIC DRAINAGE HANDPIECES
1. Wipe o excess treatment lotion after each procedure.
2. Clean the handpiece appropriately using cold sterilization or
autoclave following manufacturer's instructions.
LED LIGHT THERAPY HANDPIECES (Optional)
Refer to LED Light Therapy Handpiece User Guide part number 19692 for details on installation and operation.
SKIN IMAGING CAMERA
Clean the chin rest with an alcohol wipe after each use.


NGGETTING STARTED
168
Copyright © 2018 Leader Healthcare
13
HYDRAFACIAL MD® ELITETM User Guide
Package Contents
Console Unit
Wet (HydraFacial®) Handpiece Assembly Tool Holder
HydroPeel® Tips
Skin Solutions
Puncture Tool
Waste Container Assembly
Cleaning Cap
Pro t Pack
Success Marketing Kit
Options:
Mechanical Lymphatic Drainage Glass Handpiece Cups
Cordless Red LED Light Therapy Handpiece Cordless Blue LED Light Therapy Handpiece LED Light Therapy Handpiece Holder
LED Light Therapy Marketing Kit
Camera Handpiece Camera Holder
Wet Diamond Aggressive Abrasion Pads Smooth Tip
Cleaning Kit


GETTING STARTEDSY
Copyright © 2018 Leader Healthcare
169
14
HYDRAFACIAL MD® ELITETM User Guide
Port for waste container (Rear of the unit)
Accessory Rail
Port for Mechanical Lymphatic Drainage Handpieces
Coupling Fitting for HydraFacial® Handpiece
Manifold Buttons for Solution Bottles
Pick-up Tubes for Skin Solution & System Cleaning Solution Bottles
Touchscreen
Illuminated On/Standby Switch
Side Panel:
Charging USB Ports For Cordless LED Handpieces
Port for Camera
USB Data Transfer Port
Toggle Switches for Solutions
Removable Acrylic Door
Wheels (Front Wheels with Brakes)
Device Components


EDSYSTEM CLEANING
170
Copyright © 2018 Leader Healthcare
27
HYDRAFACIAL MD® ELITETM User Guide
Options
WET DIAMOND AGGRESSIVE ABRASION (MEDICAL USE ONLY)
1. It is always recommended to use gloves for this process.
2. After each use, remove abrasive pads and tip. Drop in hot water and
let them soak for about 10 minutes, softening any debris surrounding both pads and tip.
3. Place abrasive pad under running water and brush away all the debris with the included brush. Rinse away any debris very thoroughly.
4. It is recommended to use an ultrasonic cleaner with a disinfectant solution to thoroughly clean the abrasive pads and tip of any debris that may have been embedded between the diamond grits during use. Please follow the suggested dilution ratio from the manufacturer.
5. For maximum sterility, abrasive pads, tip, and pad holder are autoclavable following manufacturer's instructions.


SYSTEM CLEANING DG
Copyright © 2018 Leader Healthcare
171
26
HYDRAFACIAL MD® ELITETM User Guide
Other
WASTE CONTAINER
1. Wash, dry, and wipe/spray germicide over waste canister and lid. Leave open overnight to air-dry.
Note: Always remove the waste container before transporting the unit.
TOUCHSCREEN
To avoid risk of electric shock, do not disassemble the unit cabinet. The unit is not user serviceable. Remember to shut down system and unplug it from power outlet before cleaning.
Note: Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use thinner or benzene, abrasive cleaners, or com- pressed air.
1. To clean the touchscreen, use window or glass cleaner. Put the cleaner on a micro ber cloth and wipe the touch screen.
Never apply the cleaner directly on the touchscreen.
Note: Avoid getting liquids inside your touchscreen. Do not wipe the screen with a cloth or sponge that could scratch the surface.
REMOVABLE FRONT DOOR
1. To clean door use a plastic cleaner available at your nearest hardware store (for example: Novus plastic clean and shine). Never, under any circumstances use any type of alcohol to clean front door.


NG
DGETTING STARTED
172
Copyright © 2018 Leader Healthcare
15
HYDRAFACIAL MD® ELITETM User Guide
INSTALLATION
TOOL HOLDER
1. Loosen thumbscrews rst.
2. Attach the tool holder, top rst onto the accessory rail.
3. Tighten the thumbscrews to lock the handpiece holder in place.
WASTE CONTAINER
1. Attach the waste container lid and secure the clamps.
2. Insert the tube on the lid into the waste container port on the back
of the unit.
3. Make sure the waste container sits securely on the ledge.
Use a Phillips screwdriver to install the ledge.
Note: Always remove the waste container before transporting the unit.
HydraFacial® HANDPIECE
1. Plug the small tube attached to the HydraFacial® handpiece into coupling tting.
2. Connect the large tube attached to the handpiece into the waste container.
3. Locate the small tubing with the blue end and connect it to the appropriate end on the handpiece. The blue end corresponds with the blue dot. Twist the knob gently clockwise to secure the tubing.


GETTING STARTEDSY
Copyright © 2018 Leader Healthcare
173
16
HYDRAFACIAL MD® ELITETM User Guide
5. Insert the gray cartridge into the handpiece. Align the arrow on the cartridge with the unlock symbol on the handpiece. Push rmly until it snaps into place, then twist the cartridge up until the arrow aligns with the lock symbol.
Note: If the gray cartridge is di cult to insert, drizzle a small amount of water into the cartridge to lubricate it, and try again.
HYDROPEEL® TIP
1. Align the HydroPeel® tip and attach it to the handpiece.
SPECIALTY VIAL:
Single use only
1. To access specialty vials, remove the gray cartridge from the hand- piece by twisting until the arrow aligns with the unlock symbol, then pull the cartridge straight out.
2. Insert the vial into the handpiece. Push rmly until it snaps into place. Note: Keep all the toggle switches o (see below) while using spe- cialty vials.


EDSYSTEM CLEANING
174
Copyright © 2018 Leader Healthcare
25
HYDRAFACIAL MD® ELITETM User Guide
5. When the brush and air cleaning are completed, make sure all the blue toggle switches are in the OFF position. Turn the gray toggle switch “SYSTEM RINSE” up to the ON position and the vacuum set- ting on “26”. Press on the cleaning cap and ush through the hand- piece and tubing for 1 minute.
DURING TREATMENT, USING SPECIALTY VIALS
1. Fill a small bowl with RinseawayTM Solution and place next to treatment station.
2. Make sure to remove GlySalTM cartridge and replace with gray cartridge with no toggles on.
3. Set vacuum to 12 and dip the handpiece with tip attached into the bowl of RinseawayTM for 5 seconds.
4. Throw away bowl after each cleaning.


SYSTEM CLEANING DG
Copyright © 2018 Leader Healthcare
175
24
HYDRAFACIAL MD® ELITETM User Guide
HydraFacial® Handpiece
The HydraFacial® handpiece tubing chambers must be cleaned and dis- infected using the cleaning brush every week to prevent any bacterial contamination.
The HydraFacial® Handpiece
1. Ensure all the blue toggles switches are in the OFF position. Turn gray toggle switch "SYS- TEM RINSE" up to the ON position and vacuum setting on "26". Attach cleaning cap and ush through the handpiece and tubing for 1 minute
2. Detach the handpiece from all tubing. Gently twist the knobs counter-clockwise to detach each tube from the handpiece.
3. Insert the cleaning brush into the vacuum
(smaller opening) on the face of the handpiece. Push it in gently all the way, while rotating in either direction. Repeat with the opening on the back with the blue dot. A few drops of disinfectant may be dropped onto the “face” of the hand piece (held in an upright posi- tion) allowing the disinfectant to run into the handpiece opening before inserting the cleaning brush.
Note: 70% isopropyl alcohol is not suitable as a disinfectant.
4. Wash the brush bristles in soapy water between each handpiece opening insertion to clean o debris.
Vacuum Opening
"Face" of the handpiece


NG
DGETTING STARTED
176
Copyright © 2018 Leader Healthcare
17
HYDRAFACIAL MD® ELITETM User Guide
3. To re-access the skin solution bottles, remove the specialty vial and insert the gray cartridge into the handpiece. Push rmly until it snaps into place, then twist the cartridge up into the locked position.
SKIN SOLUTION BOTTLES
1. Open the front door. Remove the cap of the skin solution bottle and use the puncture tool to pierce the seal inside the bottle.
2. Press and hold each manifold button as you insert each bottle into the manifold, and then release the button.
Note: The RinseawayTM System Cleaning Solution should be installed in the manifold with the gray toggle switch labeled “SYSTEM RINSE”.
3. The toggle switches control which skin solution bottle is being used. When a switch is in the ON position, uid will be drawn from that bottle. When switched to the OFF position, no uid will be drawn from the corresponding bottle.
Note: Always keep the “SYSTEM RINSE” toggle switch (gray) o while performing procedures.


S GETTING STARTEDSY
Copyright © 2018 Leader Healthcare
177
18
HYDRAFACIAL MD® ELITETM User Guide
OPTIONAL
If you have purchased the optional kits, please see below.
WET DIAMOND AGGRESSIVE ABRASION (Medical Use Only)
1. Place the diamond pad inside the tip and push it in.
2. Place the tip on the HydraFacial® handpiece and press-in until it is
fully seated.
LYMPHATIC DRAINAGE THERAPY HANDPIECES
Mechanical Lymphatic Drainage mode (Optional): This accessory
uses vacuum and hollow glass or plastic cups to assist in massage.
1. Plug the metal tube coupling attached to the Dry Handpiece Tubing into the port on the side of the machine.
2. Connect the plastic coupling on the other end of the tubing into the Lymphatic Drainage Therapy handpiece. To connect the tubing, sim- ply press the two halves together until you hear them click into place. To disconnect the coupling halves, press the thumb latch button and gently pull the two halves apart.
3. Place the handpiece(s) in the handpiece holder.
4. Place the tips and accessories on the holder when they are not in use.
diamond tip pad
Never place suction cup over eyes or other body ori ce.


S
EDSYSTEM CLEANING
178
Copyright © 2018 Leader Healthcare
23
HYDRAFACIAL MD® ELITETM User Guide
SYSTEM CLEANING AND PREVENTIVE MAINTENANCE
The HydraFacial MD® EliteTM system needs to be cleaned after each pro- cedure. Cleaning is especially important after the usage of vials.
Skin Solution Stations And Tubing
AFTER EACH SERVICE
1. Wearing gloves is recommended.
2. After each procedure, run the “system cleaning process”. Start
by switching all the blue toggle switches down to the “OFF” position, and switch only the gray toggle switch “SYSTEM RINSE” up to the “ON” position.
3. Make sure that the RinseawayTM system cleaning solution is properly installed. Only use the Edge System RinseawayTM Solution;it is speci cally developed to ush theough the tubing line to remove and prevent any product or impurity build-up. Partially used skin solution bottles must be capped and stored in a cool place.
4. Turntheunitonandsetvacuumsettingto26.
5. Use the cleaning cap (as shown) to occlude the
handpiece. Turn the ow control valve all the way towards the + sign, and let the cleaning process run for 20-30 seconds. Extend to 1 minute after each service day. The cleaning cap can also be used as a protective cap.
6. When completed, be sure to switch the toggle switch to the “OFF” position.
7. Empty the waste on the back of the unit at the end of each service day. Do not let the waste container ll above 450ml.
8. Wash, dry, and wipe/spray germicide over waste canister and lid. Leave open overnight to air-dry.
WEEKLY CLEANING
1. Wearing gloves is recommended.
2. Use the RinseawayTM solution on each individual skin solution station
to prevent/remove any clogging. Follow the above instructions to
clean/ ush your system.
3. When completed, be sure to switch all the toggle switches to OFF
position.
Cleaning
C
c
a
p
c
a
p


OPERATING INSTRUCTIONS DG
Copyright © 2018 Leader Healthcare
179
22
HYDRAFACIAL MD® ELITETM User Guide
ACTIVATE THE LED LIGHTS (OPTIONAL)
Refer to LED Light Therapy Handpiece User Guide part number 19692 for details on installation and operation.
1. To operate the LED Lights, go to the Home screen and select “Modalities.” Then select “LED Light Therapy”.
2. Choose either Red, Blue, or Red & Blue LED Lights.
3. Select 1 Light or 2 Lights, then press Start.
4. An area of the face will light up, guiding you to continue treatment. 5. Follow the instructions on the screen.
ACTIVATE SKIN IMAGING CAMERA
1. To operate the camera, go to the Home screen and select “Camera”.
2. A prompt will appear requesting you to create a new pro le or select a pro le already in the system.
3. In the member screen, either create a new pro le
or search for a member by name, date of birth or telephone number.
4. After creating a new pro le or selecting the
member’s pro le from the system, the “Photo Capture” button should turn from gray to blue.
5. To capture a photo, place the chin rest against the chin. There are three options for capturing a photo:
• In the member pro le screen, select the “Photo Capture” button or
• On the camera, press the red button or
• Use the foot switch to capture a photo. To install the foot switch,
plug the USB cable into one of the USB ports located on the right side of the unit.


NS
DGETTING STARTED
180
Copyright © 2018 Leader Healthcare
19
HYDRAFACIAL MD® ELITETM User Guide
UNIVERSAL TOOL HOLDER
1. Loosen thumbscrews rst.
2. Attach the tool holder, top rst onto the accessory rail.
3. Tighten the thumbscrews to lock the handpiece holder in place.
CORDLESS LED LIGHT THERAPY HANDPIECES (Optional)
1. Refer to LED Light Therapy Handpiece User Guide part number 19692 for details on installation and operation.
2. USB ports for cordless LED Handpieces are located within each of the LED Light holders. Plug the LED handpieces into the appropriate hold- ers in order to recharge.
SKIN IMAGING CAMERA
1. Attach the tool holder, top rst, onto the accessory rail. Tighten the thumbscrews to lock the tool holder in place.
2. Insert the cable end connector from the camera into the port located on the right side of the unit. Push in and twist until it is completely locked.
3. Place the camera on the tool holder when not in use.


OPERATING INSTRUCTIONSOP
Copyright © 2018 Leader Healthcare
181
20
HYDRAFACIAL MD® ELITETM User Guide
OPERATION
TURN ON THE SYSTEM
1. Verify the switch on the power entry module located on the back of the unit is in the OFF ( o ) position. Connect the power cord to the power en- try module and connect the plug into a grounded wall outlet. Switch the power entry module switch to the ON ( I ) position.
2. The Illuminated Power Switch will light up blue. Press the blue Illuminated Power Switch. The machine should begin its boot up cycle at this point. When the HydraFacial® page appears on the screen, select “Here” to go to the main page.
STANDBY / SLEEP MODE
1. Press the Illuminated Power Switch and a “System Cleaning Reminder” will appear on the screen.
2. If you have not cleaned the skin solution stations, press NO and the System Cleaning Protocol screen will appear.
Note: You must clean the skin solution stations before you can turn the system o or switch to the standby mode. Always turn to the standby/ sleep mode at the end of each day.
3. If you have cleaned the skin solution stations, press YES and the system will go into standby mode.
TURN OFF THE SYSTEM
1. Follow the above steps to switch the machine into Stand by/Sleep Mode. Then switch the power entry module switch on the back of the unit to the OFF position, and the machine is completely shut o .


NSOPERATING INSTRUCTIONS
182
Copyright © 2018 Leader Healthcare
21
HYDRAFACIAL MD® ELITETM User Guide
TOUCHSCREEN OPERATION
1. Lightly tap the buttons displayed on the screen with your ngertip (not ngernail). This will cause the unit to perform a variety of functions. If the button does not seem to work, verify that you have actually pressed on the button and did not miss it.
2. There may be a 0.5 second delay when you press the buttons on the touchscreen, so do not press the same button repeatedly if it does not respond immediately.
3. Activate the modality you will be using on the touchscreen by pressing the button.
Note: The touchscreen has been preset for opti- mal performance with the HydraFacial® program. Thus, you cannot and will not need to adjust the monitor.
ADJUST FLUID FLOW
1. Turn the ow control valve towards the + sign to increase uid ow. Turn towards the - sign to decrease uid ow.
ADJUST VACUUM STRENGTH
1. To adjust vacuum settings, simply press the + button to increase the vacuum or – button to decrease the vacuum strength.
2. On the screen, select 'O' to turn vacuum on or o


Light Industrial Unit 1, Unit 18, 19 & 20 Dubai Silicon Oasis,
P.O. Box 341123, Dubai, United Arab Emirates
Tel. No.: +971 4 3263980 Fax No.: +971 4 3263984
www.leaderhealthcaregroup.com [email protected]


Click to View FlipBook Version