Sodium perchlorate | S
tri-Sodium orthophosphate dodecahydrate SLR Sodium perchlorate Certified
Mfr. No
specified reagents for general laboratory work- extra pure for HPLC
S/5966/50
packaging Cat. No Mfr. No packaging Cat. No
<5 ppm
250 g Plastic jar 1007-3263 S/5760/50 250 g Plastic jar 1033-6150
500 g Plastic jar 1024-4160 S/5760/53
1 kg Plastic jar 1025-4160 S/5760/60 NaClO4.H2O EINECS: 231-511-9
5 kg Plastic keg 1021-4210 S/5760/65 CAS: 7791-07-3 UN: 1502
25 kg Plastic keg 1233-8489 S/5760/70 MW: 140.46 GHS: Ox. Sol. 1, Acute Tox. 4
Density at 20°C: 2.02 H271, H302
Na3PO4.12H2O UN: 3262 Melting point: 130 °C P210, P301+P312
CAS: 10101-89-0 GHS: Skin Corr. 1A, Eye Dam. 1 ADR/RID: 5.1, II
MW: 380.13 H314
Density at 20°C: 1.62 P301+P330+P331, Assay: >99%
Melting point: 75 °C P305+P351+P338, P310,
ADR/RID: 8, II P260, P280, P264 Guaranteed analysis <2 ppm Phosphate (PO4)
EINECS: 231-509-8 <2 ppm
Iron (Fe)
Assay: >98% Lead (Pb)
Guaranteed analysis Absorbance specification
Max. Absorbance (1cm cell v HPLC water)
Calcium (Ca)
Copper (Cu) <200 ppm Potassium (K) <200 ppm 254 nm (sol. aqu. 1 M) : <0.02 A.U.
Iron (Fe) <20 ppm n-Butyl formate <0.01%
Lead (Pb) <50 ppm Total silicon (Si) Lot analysis on the label.
Magnesium (Mg) <20 ppm Total sulphur (S) <200 ppm Filtered to 0.2 µm.
Zinc (Zn) <200 ppm
<100 ppm
<50 ppm
Sodium oxalate Cat. No Certified AR Sodium perchlorate Cat. No Certified AR
for analysis 1260-6777 Mfr. No for analysis 1077-5531 Mfr. No
1261-6777 S/5840/50 S/5965/53
packaging S/5840/53 packaging EINECS: 231-511-9
250 g Plastic jar EINECS: 200-550-3 500 g Plastic jar UN: 1502 <10 ppm
500 g Plastic jar GHS: Acute Tox. 4 GHS: Ox. Sol. 1, Acute Tox. 4 <50 ppm
C2Na2O4 H312, H302 NaClO4.H2O H271, H302 <10 ppm
CAS: 62-76-0 P280, P302+P352, P301+P312 CAS: 7791-07-3 P210, P301+P312 <10 ppm
MW: 134.00 MW: 140.46 <20 ppm
Density at 20°C: 2.34 Density at 20°C: 2.02
Melting point: 250 to 270 °C Melting point: 130 °C <5 ppm
ADR/RID: 5.1, II
Assay: >99.9% <2 ppm
: 7 to 8.5 Potassium (K) <50 ppm Assay: >99% 4.5 to 7 Magnesium (Mg) <2 ppm
Guaranteed analysis <0.05% n-Butyl formate <0.001% <20 ppm Potassium (K) <2 ppm
pH (solution aq. 3%) Total nitrogen (N) <50 ppm Guaranteed analysis <0.002% Total phosphorus (P) <2 ppm
Loss on drying <50 ppm Total phosphorus (P) <10 ppm Total silicon (Si) <2 ppm
Calcium (Ca) <5 ppm Total silicon (Si) <10 ppm pH (aqueous solution 5%) <5 ppm Total sulphur (S) <2 ppm
Copper (Cu) Total sulphur (S) <20 ppm Calcium (Ca) <5 ppm Zinc (Zn)
Iron (Fe) <10 ppm Zinc (Zn) <10 ppm Chloride and chlorate <5 ppm
Lead (Pb) <5 ppm Copper (Cu)
Magnesium (Mg) Mfr. No Iron (Fe)
<10 ppm S/5800/48 Lead (Pb)
Lot analysis on the label S/5800/53
Cat. No Typical analysis <2 ppm Molybdenum (Mo)
Sodium oxalate <2 ppm Nickel (Ni)
1149-8842 Aluminium (Al) <2 ppm Silver (Ag)
pure 1017-2300 Cadmium (Cd) <2 ppm Strontium (Sr)
Chromium (Cr) <2 ppm Titanium (Ti)
packaging EINECS: 200-550-3 Cobalt (Co) <2 ppm Vanadium (V)
100 g Plastic jar UN: 2811 Lithium (Li)
500 g Plastic jar GHS: Acute Tox. 4 Manganese (Mn)
C2Na2O4 H312, H302
CAS: 62-76-0 P280, P302+P352, P301+P312 Lot analysis on the label.
MW: 134.00
Density at 20°C: 2.3421 Sodium perchlorate SLR
Melting point: 250 to 270 °C
ADR/RID: 6.1/III specified reagents for general laboratory work- extra pure
Sodium perborate trihydrate SLR packaging Cat. No Mfr. No
S/5960/50
specified reagents for general laboratory work- extra pure Mfr. No 250 g Plastic jar 1031-6150 S/5960/53
S/5880/53 500 g Plastic jar 1077-5341
packaging Cat. No <500 ppm
NaClO4.H2O EINECS: 231-511-9 <100 ppm
500 g Plastic jar 1075-5151 CAS: 7791-07-3 UN: 1502 <100 ppm
MW: 140.46 GHS: Ox. Sol. 1, Acute Tox. 4 <200 ppm
NaBO3.4H2O UN: 1479 Density at 20°C: 2.02 H271, H302
CAS: 10486-00-7 GHS: Repr. 1B, Eye Dam. 1, Melting point: 130 °C P210, P301+P312 <50 ppm
MW: 153.87 STOT SE 3 ADR/RID: 5.1, II
Melting point: 60 °C H360Df, H319, H335
ADR/RID: 5.1/III P280, P305+P351+P338, Assay: >98%
EINECS: 231-556-4 P201, P308+P313, P261
Guaranteed analysis
Guaranteed analysis <200 ppm Potassium (K)
Identity test Calcium (Ca) <0.02% Total phosphorus (P)
Chloride and chlorate Total silicon (Si)
Copper (Cu) <50 ppm Total sulphur (S)
Iron (Fe) <50 ppm Zinc (Zn)
Lead (Pb) <50 ppm
: Pass Magnesium (Mg) <100 ppm
301
S | Sodium periodate
Sodium periodate Certified AR Sodium peroxydisulfate
for analysis See Sodium persulfate, page 302
packaging Cat. No Mfr. No Sodium persulfate SLR
Mfr. No
100 g Plastic jar 1141-8962 S/5980/48 specified reagents for general laboratory work- extra pure S/6080/53
250 g Plastic jar 1144-3423 S/5980/50
5 kg Plastic jar 1141-3753 S/5980/65 <0.005%
SLR
NaIO4 GHS: Ox. Sol. 2, Acute Tox. packaging Cat. No
CAS: 7790-28-5 3, Skin Irrit. 2, Eye Irrit. 2, Mfr. No
MW: 213.89 STOT SE 3 500 g Plastic jar 1079-5531 S/6100/53
Melting point: 300 °C H272, H315, H319, H335, H301
ADR/RID: 5.1, 6.1, II P210, P302+P352, P280, Na2S2O8 4, Skin Irrit. 2, Eye Irrit. 2,
EINECS: 232-197-6 P261, P301+P312, CAS: 7775-27-1 Resp. Sens. 1, Skin Sens. 1,
UN: 3087 P305+P351+P338 MW: 238.09 STOT SE 3
Density at 20°C: 2.6 H272, H315, H302, H317,
Assay: >99% Melting point: 100 °C H334, H319, H335
ADR/RID: 5.1, III P261, P280, P308+P313,
EINECS: 231-892-1 P302+P352, P210,
UN: 1505 P305+P351+P338
GHS: Ox. Sol. 3, Acute Tox.
Guaranteed analysis
pH (aqueous solution 5%) 3.5 to 4.5 Iron (Fe) <5 ppm
Lead (Pb) <5 ppm
Loss on drying <0.05% Magnesium (Mg) <10 ppm Assay: >96%
Potassium (K) <200 ppm
Bromate, bromide, chlorate & chloride : < Total silicon (Si) <20 ppm Guaranteed analysis
Total sulphur (S) <100 ppm Ammonia (NH3)
0.01% Zinc (Zn) <10 ppm <0.2% n-Butyl formate
Calcium (Ca) <20 ppm Molybdenum (Mo) <5 ppm
Nickel (Ni) <5 ppm
Copper (Cu) <5 ppm Silver (Ag) <5 ppm
Titanium (Ti) <5 ppm
Iodide (I) <0.001% Vanadium (V) <5 ppm
Typical analysis <5 ppm Sodium propionate
<5 ppm
Aluminium (Al) <5 ppm specified reagents for general laboratory work- extra pure
Cadmium (Cd) <5 ppm
Chromium (Cr) <5 ppm packaging Cat. No
Cobalt (Co) <5 ppm
Lithium (Li) 500 g Plastic jar 1018-2680
Manganese (Mn)
C3H5NaO2 EINECS: 205-290-4
Lot analysis on the label CAS: 137-40-6 GHS: Acute Tox. 4, Skin Irrit. 2
MW: 96.06 H315, H312
Melting point: 285 to 286 °C P280, P302+P352
Flash point: >250 °C
Sodium peroxide Certified AR
Assay: >99%
for analysis
packaging Cat. No Mfr. No tetra-Sodium pyrophosphate decahydrate Certified AR
S/6041/53
500 g Metal can 1048-8030
for analysis
Na2O2 EINECS: 215-209-4
CAS: 1313-60-6 UN: 1504 packaging Cat. No Mfr. No
MW: 77.98 GHS: Ox. Sol. 1, Skin Corr. 1A S/6140/53
Density at 20°C: 2.8 H271, H314 500 g Plastic jar 1068-5882
Melting point: 460 °C P301+P330+P331, P280, <10 ppm
ADR/RID: 5.1, I P305+P351+P338, P310, P210 Na4P2O7.12H2O GHS: Skin Irrit. 2, Eye Irrit. 2, <50 ppm
CAS: 13472-36-1 STOT SE 3 <0.002%
Assay: >95% MW: 446.05 H315, H319, H335 <50 ppm
Boiling point: 93.8 °C P261, P302+P352, P280, <50 ppm
Guaranteed analysis Melting point: 80 °C P305+P351+P338 <10 ppm
EINECS: 205-290-4
Calcium (Ca) <500 ppm Total chloride (Cl) <0.005% 10.2 to 10.7 Magnesium (Mg) <5 ppm
Copper (Cu) <20 ppm Total phosphorus (P) <20 ppm Assay: 99 to 101% <5 ppm Potassium (K) <5 ppm
Iron (Fe) <20 ppm Total silicon (Si) <100 ppm Total chloride (Cl) <5 ppm
Lead (Pb) <20 ppm Total sulphur (S) <20 ppm Guaranteed analysis <20 ppm Total silicon (Si) <5 ppm
Magnesium (Mg) Zinc (Zn) <50 ppm <2 ppm Total sulphur (S) <5 ppm
<500 ppm pH (aqueous solution 5%) <2 ppm Zinc (Zn) <5 ppm
Typical analysis <5 ppm Cadmium (Cd) <2 ppm
<5 ppm Molybdenum (Mo) <5 ppm Calcium (Ca)
Aluminium (Al) <5 ppm Nickel (Ni) <5 ppm Copper (Cu) <5 ppm Molybdenum (Mo)
Cadmium (Cd) <5 ppm Silver (Ag) <5 ppm Iron (Fe) <5 ppm Nickel (Ni)
Chromium (Cr) <5 ppm Titanium (Ti) <5 ppm Lead (Pb) <5 ppm Silver (Ag)
Cobalt (Co) <5 ppm Vanadium (V) <5 ppm Strontium (Sr)
Lithium (Li) <5 ppm SLR Typical analysis <5 ppm Titanium (Ti)
Manganese (Mn) <5 ppm Vanadium (V)
Aluminium (Al)
Sodium peroxide Barium (Ba)
Chromium (Cr)
extra pure, granulated Cobalt (Co)
Lithium (Li)
Manganese (Mn)
packaging Cat. No Mfr. No
S/6040/53
500 g Metal can 1015-2540
Na2O2 EINECS: 215-209-4
CAS: 1313-60-6 UN: 1504
MW: 77.98 GHS: Ox. Sol. 1, Skin Corr. 1A
Density at 20°C: 2.8 H271, H314
Melting point: 460 °C P301+P330+P331, P280,
ADR/RID: 5.1, I P305+P351+P338, P310, P210
Assay: > 94% <0.005% Magnesium (Mg) <500 ppm
<20 ppm
Guaranteed analysis
Total chloride (Cl)
Lead (Pb)
302
Sodium succinate disodium salt hexahydrate | S
tetra-Sodium pyrophosphate decahydrate SLR Sodium silicate powder
specified reagents for general laboratory work- extra pure Technical
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
S/6120/60
1 kg Plastic jar 1068-5692 1 kg Plastic jar 1007-0470 S/6400/60
25 kg Fibre Keg 1262-6777 S/6400/70
Na4P2O7.12H2O EINECS: 205-290-4
CAS: 13472-36-1 GHS: Skin Irrit. 2, Eye Irrit. 2, CSiAOS2::N6a82O34-92-0 UN: 3253
MW: 446.05 STOT SE 3 MW: 122.06 GHS: Skin Corr. 1B, STOT SE 3
Density at 20°C: 1.82 H315, H319, H335 Melting point: 72 °C H314, H335
Boiling point: 93.8 °C P261, P302+P352, P280, ADR/RID: 8, III P280, P301+P330+P331,
Melting point: 80 °C P305+P351+P338 EINECS: 229-912-9 P310, P305+P351+P338,
P304+P340, P302+P352
Assay: >98%
<100 ppm Potassium (K) <200 ppm Guaranteed analysis : Pass
Guaranteed analysis <10 ppm n-Butyl formate <0.01% Identity test
<10 ppm Total silicon (Si) Wt ratio SiO2: Na2O approx.2:1
Calcium (Ca) <10 ppm Total sulphur (S) <200 ppm
Copper (Cu) <50 ppm Zinc (Zn) <200 ppm
Iron (Fe)
Lead (Pb) <50 ppm
Magnesium (Mg)
Sodium pyrosulfite See Sodium metabisulfite, page 298 Sodium silicate solution d=1.5
Technical
packaging Cat. No Mfr. No
2.5 Ò HDPE Plastic bottle 1006-0470 S/6340/17
25 Ò HDPE Plastic container 1029-2052 S/6340/25
Sodium salicylate SLR CSiAOS2::N1a32O44-09-8 EINECS: 215-687-4
Density at 20°C: 1.4 UN: 1760
specified reagents for general laboratory work- extra pure Mfr. No Boiling point: 100.6 °C GHS: Skin Irrit. 2, Eye Dam.
S/6200/53 Melting point: -0.6 °C 1, STOT SE 3
packaging Cat. No S/6200/70 ADR/RID: 8/II H318, H315, H335
1003-0460 P280, P305+P351+P338
500 g Plastic jar 1193-5091
25 kg Fibre Keg 2, Eye Irrit. 2, STOT SE 3 Guaranteed analysis : Pass
H315, H335, H302, H319 Identity test
C7H5NaO3 P261, P301+P312,
CAS: 54-21-7 P302+P352, P280, Wt ratio SiO2: Na2 O approx. 2:1
MW: 160.11 P305+P351+P338
Melting point: 200 °C <0.1% Sodium succinate disodium salt hexahydrate Certified AR
EINECS: 200-198-0 <1% Sulfate (SO4) <0.04%
GHS: Acute Tox. 4, Skin Irrit. <2 ppm n-Butyl formate for analysis Mfr. No
<10 ppm SLR S/6490/48
Assay: >99.5% Mfr. No packaging Cat. No S/6490/68
S/6280/46
Guaranteed analysis 100 g Plastic jar 1141-8852 <0.001%
10 kg Plastic keg 1063-6272 <20 ppm
Water <20 ppm
Arsenic (As) C4H4Na2O4.6H2O <20 ppm
Lead (Pb) CAS: 6106-21-4 <10 ppm
MW: 270.15
Sodium selenite Melting point: >300 °C
specified reagents for general laboratory work- extra pure Assay: 99.5 to 100.5%
packaging Cat. No Guaranteed analysis <20 ppm n-Butyl formate
1069-5882 Calcium (Ca) <5 ppm Total nitrogen (N)
25 g Plastic jar UN: 2630 Copper (Cu) <5 ppm Total silicon (Si)
GHS: Acute Tox. 2, Skin Iron (Fe) <5 ppm Total sulphur (S)
Na2SeO3 Sens. 1, Aquatic Chronic 2 Lead (Pb) Zinc (Zn)
CAS: 10102-18-8 H317, H331, H411, H300, Magnesium (Mg) <10 ppm
MW: 172.94 EUH031 Potassium (K) <50 ppm
Density at 20°C: 3.121 P301+P310, P304+P340,
Melting point: 350 °C P280, P260, P273 Lot analysis on the label
ADR/RID: 6.1, I
EINECS: 233-267-9 9 to 11 Sodium succinate disodium salt hexahydrate
Assay: >99% specified reagents for general laboratory work- extra pure
Guaranteed analysis
pH (aqueous solution 2%)
Sodium sesquicarbonate dihydrate packaging Cat. No SLR
pure 500 g Plastic jar 1024-4590 Mfr. No
S/6480/53
C4H4Na2O4.6H2O Melting point: >300 °C
CAS: 6106-21-4 EINECS: 205-778-7 <200 ppm
MW: 270.15 <0.005%
packaging Cat. No Mfr. No
3 kg Plastic jar 1060-5892 S/6310/63 Assay: >99% <100 ppm
GHS: Eye Irrit. 2 <100 ppm
Na2CO3.NaHCO3.2H2O H319 Guaranteed analysis <100 ppm Potassium (K)
CAS: 6106-20-3 P280, P305+P351+P338 Calcium (Ca) <20 ppm n-Butyl formate <50 ppm
MW: 226.03 Copper (Cu) <20 ppm Total silicon (Si)
EINECS: 208-580-9 : Pass Iron (Fe) <20 ppm Total sulphur (S)
Lead (Pb) <50 ppm Zinc (Zn)
Guaranteed analysis Magnesium (Mg)
Identity test
303
S | Sodium sulfate anhydrous
Sodium sulfate anhydrous Distol Sodium sulfate anhydrous SLR
for residue and pesticide analysis specified reagents for general laboratory work- extra pure Mfr. No
S/6600/53
packaging Cat. No Mfr. No packaging Cat. No S/6600/60
1 kg Plastic jar 1039-7791 S/6660/60 S/6600/63
Na2SO4 Boiling point: 1700 °C 500 g Plastic jar 1060-6082 S/6600/65
CAS: 7757-82-6 Melting point: 884 to 888 °C <100 ppm 1 kg Plastic jar 1022-4640 S/6600/70
MW: 142.04 EINECS: 231-820-9 3 kg Plastic jar 1014-2780
Certified AR 5 kg Plastic jar 1031-6390 <500 ppm
Assay: > 99.5% <0.2% Potassium (K) 25 kg Plastic keg 1083-1471 <0.01%
Mfr. No
Guaranteed analysis S/6640/53 Na2SO4 Boiling point: 1700 °C <100 ppm
Loss on drying S/6640/60 CAS: 7757-82-6 Melting point: 884 to 888 °C <100 ppm
S/6640/63 MW: 142.04 EINECS: 231-820-9
S/6640/65 Density at 20°C: 2.68 <50 ppm
Sodium sulfate anhydrous S/6640/68 <0.5% Potassium (K)
Assay: >99% <200 ppm n-Butyl formate
for analysis, granular Total phosphorus (P)
Guaranteed analysis <10 ppm Total silicon (Si)
packaging Cat. No <20 ppm Zinc (Zn)
Loss on drying <10 ppm
500 g Plastic jar 1020-4690 Calcium (Ca) <100 ppm
1 kg Plastic jar 1019-2730 Copper (Cu)
3 kg Plastic jar 1063-5892 Iron (Fe)
5 kg Plastic jar 1020-4070 Lead (Pb)
10 kg Plastic keg 1021-4070 Magnesium (Mg)
Na2SO4 Boiling point: 1700 °C
CAS: 7757-82-6 Melting point: 884 to 888 °C
MW: 142.04 EINECS: 231-820-9
Assay: >99.5% 5 to 7 Magnesium (Mg) <20 ppm Sodium sulfate decahydrate Certified AR
<0.2% Potassium (K) <100 ppm
Guaranteed analysis : <0.002% Total chloride (Cl) for analysis Mfr. No
Total nitrogen (N) <0.001% S/6560/53
pH (aqueous solution 5%) Pass Total phosphorus (P) <10 ppm packaging Cat. No S/6560/60
Loss on drying <50 ppm Total silicon (Si) <20 ppm
Reducing substances Zinc (Zn) <20 ppm 500 g Plastic jar 1052-8450 <5 ppm
Oxidizing substance <2 ppm <10 ppm 1 kg Plastic jar 1041-8420 <50 ppm
Calcium (Ca) <5 ppm <0.0005%
Copper (Cu) <2 ppm <1 ppm Na2SO4.10H2O Density at 20°C: 1.46
Iron (Fe) <1 ppm CAS: 7727-73-3 Melting point: 884 °C <5 ppm
Lead (Pb) <1 ppm MW: 322.19 EINECS: 231-820-9 <20 ppm
<1 ppm <20 ppm
Typical analysis <2 ppm Manganese (Mn) <2 ppm Assay: 99 to 101% 6 to 7 Magnesium (Mg)
<2 ppm Molybdenum (Mo) <1 ppm : <0.001% Potassium (K) <5 ppm
Aluminium (Al) <1 ppm Nickel (Ni) <1 ppm Guaranteed analysis Total chloride (Cl)
Arsenic (As) <1 ppm Silver (Ag) Pass Total nitrogen (N) <1 ppm
Barium (Ba) <1 ppm Strontium (Sr) Certified AR pH (aqueous solution 5%) <50 ppm Total phosphorus (P) <1 ppm
Cadmium (Cd) <1 ppm Titanium (Ti) Reducing substances Total silicon (Si) <1 ppm
Chromium (Cr) <1 ppm Vanadium (V) Mfr. No Oxidizing substance <1 ppm Zinc (Zn) <1 ppm
Cobalt (Co) S/6650/53 Calcium (Ca) <2 ppm <2 ppm
Lithium (Li) S/6650/60 Copper (Cu) <1 ppm <1 ppm
S/6650/65 Iron (Fe) <1 ppm
Lot analysis on the label. Lead (Pb)
Sodium sulfate anhydrous Typical analysis <2 ppm Manganese (Mn)
<2 ppm Molybdenum (Mo)
for analysis, fine powder Aluminium (Al) <1 ppm Nickel (Ni)
Arsenic (As) <1 ppm Silver (Ag)
packaging Cat. No Barium (Ba) <1 ppm Strontium (Sr)
Cadmium (Cd) <1 ppm Titanium (Ti)
500 g Plastic jar 1052-0872 Chromium (Cr) <1 ppm Vanadium (V)
1 kg Plastic jar 1074-6292 Cobalt (Co)
5 kg Plastic jar 1018-0182 Lithium (Li)
Na2SO4 Boiling point: 1700 °C Lot analysis on the label.
CAS: 7757-82-6 Melting point: 884 to 888 °C
MW: 142.04 EINECS: 231-820-9
Assay: >99.5% <0.2% Magnesium (Mg) <20 ppm Sodium sulfate decahydrate SLR
: <0.002% Potassium (K) <100 ppm
Guaranteed analysis Total chloride (Cl) specified reagents for general laboratory work- extra pure Mfr. No
Pass Total nitrogen (N) <0.001% S/6520/60
Loss on drying <50 ppm Total phosphorus (P) <10 ppm packaging Cat. No
Reducing substances Total silicon (Si) <20 ppm <200 ppm
Oxidizing substance <2 ppm Zinc (Zn) <20 ppm 1 kg Plastic jar 1016-2780 <0.02%
Calcium (Ca) <5 ppm <10 ppm
Copper (Cu) <2 ppm Na2SO4.10H2O Density at 20°C: 1.46 <50 ppm
Iron (Fe) <1 ppm CAS: 7727-73-3 Melting point: 884 °C <100 ppm
Lead (Pb) <2 ppm Manganese (Mn) <1 ppm MW: 322.19 EINECS: 231-820-9
<2 ppm Molybdenum (Mo) <1 ppm <20 ppm
Typical analysis <1 ppm Nickel (Ni) <1 ppm Assay: >99% <200 ppm Potassium (K)
<1 ppm Silver (Ag) <2 ppm <5 ppm n-Butyl formate
Aluminium (Al) <1 ppm Strontium (Sr) <1 ppm Guaranteed analysis Total phosphorus (P)
Arsenic (As) <1 ppm Titanium (Ti) <1 ppm Calcium (Ca) <10 ppm Total silicon (Si)
Barium (Ba) <1 ppm Vanadium (V) Copper (Cu) <5 ppm Zinc (Zn)
Cadmium (Cd) Iron (Fe)
Chromium (Cr) Lead (Pb) <20 ppm
Cobalt (Co) Magnesium (Mg)
Lithium (Li)
Lot analysis on the label.
304
Sodium tetraborate anhydrous | S
Sodium sulfite anhydrous Certified AR Guaranteed analysis 9.2 to 9.4 Total chloride (Cl) <0.0005%
<0.005% Total phosphorus (P) <10 ppm
for analysis Mfr. No pH (aqueous solution 5%) <20 ppm Total silicon (Si) <50 ppm
S/6850/53 Insoluble matter Total sulphur (S) <50 ppm
packaging Cat. No S/6850/60 Calcium (Ca) <5 ppm Zinc (Zn) <10 ppm
Copper (Cu) <5 ppm Phosphate (PO4) <10 ppm
500 g Plastic jar 1007-0400 <500 ppm Iron (Fe) <5 ppm Sulfate (SO4) <50 ppm
1 kg Plastic jar 1070-4391 <0.05% Lead (Pb) <10 ppm
Magnesium (Mg) <100 ppm <2 ppm
Na2SO3 Density at 20°C: 2.63 <50 ppm Potassium (K) <2 ppm
CAS: 7757-83-7 Melting point: >500 °C <10 ppm <2 ppm
MW: 126.05 EINECS: 231-821-4 Typical analysis <2 ppm
<5 ppm <2 ppm
Assay: >98% <50 ppm Potassium (K) <5 ppm Aluminium (Al) <2 ppm Manganese (Mn) <2 ppm
<10 ppm Total chloride (Cl) <5 ppm Arsenic (As) <2 ppm Molybdenum (Mo) <2 ppm
Guaranteed analysis <10 ppm Total silicon (Si) <5 ppm Barium (Ba) <2 ppm Nickel (Ni)
<10 ppm Zinc (Zn) <5 ppm Cadmium (Cd) <2 ppm Silver (Ag)
Calcium (Ca) <20 ppm <5 ppm Chromium (Cr) <2 ppm Strontium (Sr)
Copper (Cu) <5 ppm Cobalt (Co) <2 ppm Titanium (Ti)
Iron (Fe) Lithium (Li) <2 ppm Vanadium (V)
Lead (Pb)
Magnesium (Mg) Lot analysis on the label.
Typical analysis <5 ppm Manganese (Mn) di-Sodium tetraborate decahydrate SLR
<0.5 ppm Molybdenum (Mo)
Aluminium (Al) Nickel (Ni) extra pure, crystals Mfr. No
Arsenic (As) <5 ppm Silver (Ag) S/7000/60
Barium (Ba) <5 ppm Strontium (Sr) packaging Cat. No S/7000/63
Cadmium (Cd) <5 ppm Titanium (Ti)
Chromium (Cr) <5 ppm Vanadium (V) 1 kg Plastic jar 1145-8852 <500 ppm
Cobalt (Co) <5 ppm 3 kg Plastic jar 1027-4540 <0.02%
Lithium (Li)
Na2B4O7.10H2O EINECS: 215-540-4 <100 ppm
Lot analysis on the label. CAS: 1303-96-4 GHS: Repr. 1B <500 ppm
MW: 381.36 H360FD <100 ppm
Sodium sulfite anhydrous SLR Density at 20°C: 17.3 P201, P308+P313
Melting point: 75 °C
specified reagents for general laboratory work- extra pure Mfr. No
S/6840/53 Assay: >99%
packaging Cat. No S/6840/60 <200 ppm Potassium (K)
S/6840/63 Guaranteed analysis <50 ppm n-Butyl formate
500 g Plastic jar 1023-4400 <50 ppm Total phosphorus (P)
1 kg Plastic jar 1038-6050 <1000 ppm Calcium (Ca) <50 ppm Total sulphur (S)
3 kg Plastic jar 1079-4381 <0.1% Copper (Cu) Zinc (Zn)
Iron (Fe) <100 ppm
Na2SO3 Density at 20°C: 2.63 <200 ppm Lead (Pb)
CAS: 7757-83-7 Melting point: >500 °C <50 ppm Magnesium (Mg)
MW: 126.05 EINECS: 231-821-4
Assay: >97% di-Sodium tetraborate decahydrate SLR, Eur. Ph.
Guaranteed analysis <200 ppm Potassium (K) specified reagents for general laboratory work- extra pure
Calcium (Ca) <50 ppm n-Butyl formate
Copper (Cu) <50 ppm Total silicon (Si) packaging Cat. No Mfr. No
Iron (Fe) <50 ppm Zinc (Zn) S/7010/60
Lead (Pb) 1 kg Plastic jar 1055-8450 S/7010/63
Magnesium (Mg) <100 ppm 3 kg Plastic jar 1028-4540 S/7010/70
25 kg Plastic keg 1142-3893
Sodium tauroglycocholate <500 ppm
Na2B4O7.10H2O EINECS: 215-540-4 <0.02%
technical CAS: 1303-96-4 GHS: Repr. 1B
MW: 381.36 H360FD <100 ppm
Density at 20°C: 17.3 P201, P308+P313 <500 ppm
Melting point: 75 °C <100 ppm
packaging Cat. No Mfr. No <200 ppm Potassium (K)
100 g Plastic jar 1022-4450 S/6960/48 Assay: >99% <50 ppm n-Butyl formate
C28H47N2NaO8S <50 ppm Total phosphorus (P)
CAS: 41945-48-6 Guaranteed analysis <50 ppm Total sulphur (S)
MW: 230.08 Zinc (Zn)
EINECS: 255-596-7 Calcium (Ca) <100 ppm
Copper (Cu)
Guaranteed analysis Iron (Fe)
Identity test Lead (Pb)
Magnesium (Mg)
: Pass
di-Sodium tetraborate anhydrous SLR
extra pure, 99%+ Mfr. No
S/6980/60
di-Sodium tetraborate decahydrate Certified AR packaging Cat. No
<500 ppm
for analysis Mfr. No 1 kg Plastic jar 1144-8852 <0.02%
S/7040/50
packaging Cat. No S/7040/53 B4Na2O7 Melting point: 741 °C <100 ppm
S/7040/60 CAS: 1330-43-4 EINECS: 215-540-4 <500 ppm
250 g Plastic jar 1002-0430 S/7040/65 MW: 201.22 GHS: Repr. 1B <100 ppm
500 g Plastic jar 1047-7650 Density at 20°C: 2.36 H360FD
1 kg Plastic jar 1029-4540 Boiling point: 1575 °C P201, P308+P313
5 kg Plastic keg 1019-2540
Assay: >99%
Na2B4O7.10H2O EINECS: 215-540-4 <200 ppm Potassium (K)
CAS: 1303-96-4 GHS: Repr. 1B Guaranteed analysis <50 ppm n-Butyl formate
MW: 381.36 H360FD <50 ppm Total phosphorus (P)
Density at 20°C: 17.3 P201, P308+P313 Calcium (Ca) <50 ppm Total sulphur (S)
Melting point: 75 °C Copper (Cu) Zinc (Zn)
Iron (Fe) <100 ppm
Assay: 99.5 to 100.5% Lead (Pb)
Magnesium (Mg)
305
S | Sodium tetrahydroborate
Sodium tetrahydroborate Sodium thiosulfate pentahydrate SLR
See Sodium borohydride, page 283 specified reagents for general laboratory work- extra pure Mfr. No
S/7200/53
Sodium thiocyanate, anhydrous SLR packaging Cat. No S/7200/60
S/7200/61
specified reagents for general laboratory work- extra pure Mfr. No 500 g Plastic jar 1148-3723 S/7200/63
S/7120/53 1 kg Plastic jar 1064-5122
2 kg Plastic jar 1143-3693 <500 ppm
3 kg Plastic jar 1008-0350 <0.1%
Na2S2O3.5H2O Density at 20°C: 1.72 <100 ppm
CAS: 10102-17-7 Melting point: 48.5 °C <50 ppm
MW: 248.18 EINECS: 231-867-5
packaging Cat. No Assay: >99% <100 ppm Potassium (K)
<20 ppm n-Butyl formate
500 g Plastic jar 1074-4961 Guaranteed analysis <20 ppm Total silicon (Si)
<20 ppm Zinc (Zn)
NaSCN Chronic 3 Calcium (Ca) <50 ppm
CAS: 540-72-7 H312, H412, H302, H332, Copper (Cu)
MW: 81.07 EUH032 Iron (Fe)
Melting point: 287 °C P280, P302+P352, P273, Lead (Pb)
EINECS: 208-754-4 P233, P301+P312, P304+P340 Magnesium (Mg)
GHS: Acute Tox. 4, Aquatic
<200 ppm Magnesium (Mg) <50 ppm Sodium thiosulfate pentahydrate
Assay: >98% <10 ppm Potassium (K) <500 ppm
<20 ppm n-Butyl formate Technical
Guaranteed analysis <10 ppm Zinc (Zn) <0.05%
<100 ppm packaging Cat. No Mfr. No
Calcium (Ca)
Copper (Cu) SLR 3 kg Plastic jar 1075-4961 S/7160/63
Iron (Fe) 25 kg Plastic keg 1147-8852 S/7160/70
Lead (Pb)
Na2S2O3.5H2O Density at 20°C: 1.72
Sodium thiosulfate anhydrous CAS: 10102-17-7 Melting point: 48.5 °C
MW: 248.18 EINECS: 231-867-5
specified reagents for general laboratory work- extra pure
packaging Cat. No Mfr. No Sodium thiosulfate solution 0.1M (0.1N) Eur.Ph. , USP, BP
1038-5810
500 g Plastic jar 1148-8852 S/7250/53 NIST Standard solution ready to use, For Volumetric analysis
1 kg Plastic jar 1039-5810 S/7250/60
3 kg Plastic jar Boiling point: 100 °C S/7250/63 packaging Cat. No Mfr. No
Melting point: 48 °C
Na2S2O3 EINECS: 231-867-5 1Ò HDPE Plastic bottle 1042-9180 J/7950/15
CAS: 7772-98-7 2.5 Ò HDPE Plastic bottle 1024-3960 J/7950/17
MW: 158.11 : Pass 5Ò HDPE Plastic bottle 1075-3694 J/7950/21
Density at 20°C: 1.66 10 Ò Bag in box 1012-1910 J/7950/24
Guaranteed analysis Density at 20°C: 1.12
Identity test Manufactured to a tolerance of ± 0.1%.
See the full range of Standard Volumetric solution page 323.
Sodium thiosulfate pentahydrate Sodium thiosulfate solution 0.1M (0.1N)
for analysis Certified AR NIST Standard Concentrate, For Volumetric analysis
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
J/7950C/05
500 g Plastic jar 1029-4250 S/7240/53 1 Ampoule 1055-8240 J/7950C/90
1 kg Plastic jar 1009-0350 S/7240/60
3 kg Plastic jar 1019-2250 S/7240/63 6 Ampoule 1067-7412 Mfr. No
5 kg Plastic keg 1072-3811 S/7240/65 J/7951C/05
25 kg Plastic keg 1018-2300 S/7240/70 Each ampoule makes 1 Ò of solution. J/7951C/90
See the full range of Standard Volumetric solution page 323.
Na2S2O3.5H2O Melting point: 48.5 °C
CAS: 10102-17-7 EINECS: 231-867-5 Sodium thiosulfate solution 0.5M (0.5N)
MW: 248.18
NIST Standard Concentrate, For Volumetric analysis
Assay: 99.5 to 100.5%
5.5 to 7.5 Potassium (K) <50 ppm packaging Cat. No
Guaranteed analysis : <0.02% Sulfide (S) <0.0002%
<20 ppm Sulphate and sulphite 1 Ampoule 1019-2392
pH (aqueous solution 5%) Total chloride (Cl) >0.02 % 6 Ampoule 1007-0220
Sulfate & sulfite <5 ppm Total nitrogen (N) <0.02%
Calcium (Ca) <5 ppm Total silicon (Si) <50 ppm Density at 20°C: 1.0 to 1.1
Copper (Cu) <5 ppm Zinc (Zn) <20 ppm
Iron (Fe) <10 ppm <10 ppm Each ampoule makes 500 mÒ of solution.
Lead (Pb) See the full range of Standard Volumetric solution page 323.
Magnesium (Mg)
<2 ppm Molybdenum (Mo) <2 ppm Sodium thiosulfate solution 0.01N Eur.Ph, BP
Typical analysis <2 ppm Nickel (Ni) <2 ppm
<2 ppm Silver (Ag) <2 ppm Nist Standard solution ready to use, For volumetric analysis
Aluminium (Al) <2 ppm Strontium (Sr) <2 ppm
Barium (Ba) <2 ppm Titanium (Ti) <2 ppm packaging Cat. No Mfr. No
Cadmium (Cd) <2 ppm Vanadium (V) <2 ppm J/9011/17
Chromium (Cr) <2 ppm 2.5 Ò HDPE Plastic bottle 1267-6727
Cobalt (Co)
Lithium (Li) Manufactured to a tolerance of ± 0.1%.
Manganese (Mn) See the full range of Standard Volumetric solution page...
Lot analysis on the label.
306
Sodium tungstate dihydrate | S
Sodium tungstate dihydrate SLR
specified reagents for general laboratory work- extra pure Mfr. No
S/7320/48
packaging Cat. No
<500 ppm
100 g Plastic jar 1057-9390 <0.01%
Na2WO4.2H2O GHS: Acute Tox. 4, Eye Irrit. 2 <500 ppm
CAS: 10213-10-2 H319, H302 <500 ppm
MW: 329.86 P301+P312, P280,
Density at 20°C: 4.18 P305+P351+P338 <20 ppm
EINECS: 236-743-4
7 to 10 Potassium (K)
Assay: 98 to 102% <50 ppm n-Butyl formate
<20 ppm Total silicon (Si)
Guaranteed analysis <20 ppm Total sulphur (S)
<20 ppm Zinc (Zn)
pH (aqueous solution 2%) <20 ppm
Calcium (Ca)
Copper (Cu)
Iron (Fe)
Lead (Pb)
Magnesium (Mg)
307
S | Solvents for Chromatography
LC/MS application – including Optima LC/MS Solvents, Blends and Reagents
Solvents tested on LC-MS Thermo Scientific instrument to ensure suitability. Filtered to 0.2µm.
designation packsize package type Cat. No Mfr. No page
Acetic acid 1 mÒ Ampoule 1133-7540 A113-1AMP
Acetonitrile 10x1 mÒ Ampoule 1137-7540 A113-10X1AMP 13
LCMSKIT 50 mÒ HDPE Plastic bottle 1086-0701 A113-50 13
Acetonitrile with 0.1% formic acid (v/v) 500 mÒ Glass bottle 1005-5454 A955-500 13
1Ò Glass bottle 1048-9553 A955-1 18
Acetonitrile with 0.1% trifluoroacetic acid (v/v) 2.5 Ò Glass bottle 1000-1334 A955-212 18
Ammonium acetate 4Ò Glass bottle 1006-1044 A955-4 18
Ammonium formate Glass bottle 1022-4864 LCMSKIT 18
Formic acid Box Glass bottle 1046-8704 LS120-500 18
500 mÒ Glass bottle 1067-8935 LS120-1 21
Isopropanol 1Ò Glass bottle 1011-8464 LS120-212 21
2.5 Ò Glass bottle 1071-3337 LS120-4 21
Methanol 4Ò Glass bottle 1027-0455 LS121-500 21
500 mÒ Glass bottle 1023-0125 LS121-1 22
Trifluoroacetic acid 1Ò Glass bottle 1058-5635 LS121-212 22
2.5 Ò Glass bottle 1068-1046 LS121-4 22
Water 4Ò Glass bottle 1131-7490 A114-50 22
Glass bottle 1137-7490 A115-50 36
Water with 0.1% formic acid (v/v) 50 g Ampoule 1078-0320 A117-05AMP 40
Ampoule 1047-3038 A117-1AMP 132
Water with 0.1% trifluoroacetic acid (v/v) 50 g Ampoule 1006-3427 A117-2AMP 132
0.5 mÒ Ampoule 1079-7488 A117-10X1AMP 132
1 mÒ HDPE Plastic bottle 1059-6814 A117-50 132
2 mÒ Glass bottle 1078-3447 A461-500 132
10x1 mÒ Glass bottle 1009-1304 A461-1 167
50 mÒ Glass bottle 1068-4355 A461-212 167
500 mÒ Glass bottle 1000-1314 A461-4 167
1Ò Glass bottle 1063-6545 A456-500 167
2.5 Ò Glass bottle 1003-1094 A456-1 199
4Ò Glass bottle 1076-7665 A456-212 199
500 mÒ Glass bottle 1040-2824 A456-4 199
1Ò Ampoule 1015-5347 A116-05AMP 199
2.5 Ò Ampoule 1026-6617 A116-1AMP 358
4Ò Ampoule 1037-8747 A116-2AMP 358
0.5 mÒ Ampoule 1012-5637 A116-10X1AMP 358
1 mÒ HDPE bottle 1072-3857 A116-50 358
2 mÒ Glass bottle 1009-5164 W6-500 358
10x1 mÒ Glass bottle 1072-8098 W6-1 367
50 mÒ Glass bottle 1050-5904 W6-212 367
500 mÒ Glass bottle 1008-1494 W6-4 367
1Ò Glass bottle 1042-9474 LS118-500 367
2.5 Ò Glass bottle 1022-9884 LS118-1 369
4Ò Glass bottle 1018-8164 LS118-212 369
500 mÒ Glass bottle 1051-6615 LS118-4 369
1Ò Glass bottle 1036-2055 LS119-500 369
2.5 Ò Glass bottle 1031-1725 LS119-1 370
4Ò Glass bottle 1051-6625 LS119-212 370
500 mÒ Glass bottle 1026-0455 LS119-4 370
1Ò 370
2.5 Ò
4Ò
UHPLC application - UHPLC gradient grade Solvents
Solvents tested on UHPLC Thermo Scientific instrument to ensure suitability.
Filtered to 0.1µm. Lot analysis on the label.
packsize package type Cat. No Mfr. No page
1Ò Coated Glass bottle 1131-7080 A/0650/PB15 18
2.5 Ò Coated Glass bottle 1137-3230 A/0650/PB17 18
Box Coated Glass bottle 1133-2693 UHPLCKIT 19
1Ò Coated Glass bottle 1135-7080 M/4070/PB15 199
2.5 Ò Coated Glass bottle 1131-3240 M/4070/PB17 199
1Ò Coated Glass bottle 1130-7090 W/0120/PB15 367
2.5 Ò Coated Glass bottle 1135-7090 W/0120/PB17 367
308
Solvents for Chromatography | S
HPLC Gradient grade- Solvents, Blends and Reagents
Solvents tested on gradient analysis conditions. Filtered to 0.2µm. Lot analysis on the label.
designation packsize package type Cat. No Mfr. No page
Acetonitrile Advanced gradient grade 1Ò Coated Glass bottle 1039-8233 A/0632/PB15
2.5 Ò Coated Glass bottle 1062-9112 A/0632/PB17 19
Acetonitrile HPLC gradient grade 1Ò Glass bottle 1079-4741 A/0627/15 19
Glass bottle 1066-0131 A/0627/17 19
Acetonitrile HPLC grade 2.5 Ò Coated Glass bottle 1063-0131 A/0627/PB17 19
Acetonitrile with 0.1% formic acid (v/v) Aluminium can 1050-0911 A/0627/21 19
Acetonitrile with 0.1% trifluoroacetic acid (v/v) 5Ò Returnable Drum 1265-6667 A/0627/10RSS 19
Isopropanol HPLC gradient grade 10 Ò Returnable Drum 1266-6667 A/0627/25RSS 19
Methanol Advanced gradient grade 25 Ò Returnable Drum 1134-1842 A/0627/30RSS 19
30 Ò Glass bottle 1023-7233 A/0636/15 19
Methanol HPLC gradient grade 1Ò Glass bottle 1006-3063 A/0636/17 19
2.5 Ò Glass bottle 1232-7123 FE/1100/17 19
Methanol with 0.1% formic acid (v/v) 2.5 Ò Glass bottle 1239-7113 FE/0200/17 22
Water Advanced gradient grade 2.5 Ò Glass bottle 1056-1802 P/7508/17 22
2.5 Ò Coated Glass bottle 1014-4953 M/4060/PB15 167
Water HPLC gradient grade 1Ò Coated Glass bottle 1067-0263 M/4060/PB17 200
2.5 Ò Glass bottle 1001-0280 M/4058/15 200
Water with 0.1% Formic Acid HPLC gradient grade 1Ò Glass bottle 1049-9560 M/4058/17 200
Acetonitrile with 0.1% Formic acid HPLC gradient grade Coated Glass bottle 1000-0280 M/4058/PB17 200
2.5 Ò Aluminium can 1048-7322 M/4058/21 200
Returnable Drum 1266-6737 M/4058/10RSS 200
5Ò Returnable Drum 1267-6737 M/4058/25RSS 200
10 Ò Returnable Drum 1136-1842 M/4058/30RSS 200
25 Ò Glass bottle 1232-7083 FE/1300/17 200
30 Ò Coated Glass bottle 1032-7873 W/0110/PB15 202
2.5 Ò Coated Glass bottle 1022-1712 W/0110/PB17 368
1Ò Glass bottle 1036-7171 W/0106/15 368
2.5 Ò Glass bottle 1044-9380 W/0106/17 368
1Ò Coated Glass bottle 1025-7243 W/0106/PB17 368
Returnable Drum 1260-6797 W/0106/10RSS 368
2.5 Ò Returnable Drum 1261-6797 W/0106/25RSS 368
Returnable Drum 1263-6797 W/0106/30RSS 368
10 Ò Glass bottle 1231-7123 FE/1200/17 368
25 Ò Glass bottle 1238-7113 FE/0100/17 370
30 Ò 370
2.5 Ò
2.5 Ò
HPLC grade- Solvents and Reagents packsize package type Cat. No Mfr. No page
500 mÒ Coated Glass bottle 1036-5020 A/0406/PB08 13
Solvents filtered to 0.2µm. Lot analysis on the label. 1Ò Coated Glass bottle 1006-0000 A/0406/PB15 13
1Ò Glass bottle 1041-7440 A/0606/15 16
designation 2.5 Ò Glass bottle 1013-1560 A/0606/17 16
Acetic acid glacial 10 Ò Returnable Drum 1267-6657 A/0606/10RSS 16
25 Ò Returnable Drum 1260-6667 A/0606/25RSS 16
Acetone 30 Ò Returnable Drum 1261-6667 A/0606/30RSS 16
1Ò Glass bottle 1075-4361 A/0626/15 20
Acetonitrile Glass bottle 1040-7440 A/0626/17 20
2.5 Ò Coated Glass bottle 1001-0010 A/0626/PB17 20
Ammonia solution 35% d=0.88 Aluminium can 1018-1460 A/0626/21 20
Ammonia solution 0.25M 5Ò Returnable Drum 1262-6667 A/0626/10RSS 20
Ammonium acetate 10 Ò Returnable Drum 1263-6667 A/0626/25RSS 20
Ammonium acetate solution 0.25M 25 Ò Returnable Drum 1264-6667 A/0626/30RSS 20
Ammonium carbonate 30 Ò Coated Glass bottle 1050-8610 A/3295/PB05 34
1-Butane sulfonic acid sodium salt 100 mÒ Coated Glass bottle 1014-4483 J/0100/PB08 35
500 mÒ Plastic jar 1059-8410 A/3446/50 36
tert-Butyl methyl ether 250 g HDPE plastic bottle 1064-9633 J/0200/PB08 37
500 mÒ Plastic jar 1078-5511 A/3686/50 38
250 g Plastic jar 1019-1510 B/4791/46 67
25 g Glass bottle 1027-3960 M/4496/17 71
2.5 Ò Returnable Drum 1268-6737 M/4496/10RSS 71
10 Ò Returnable Drum 1260-6747 M/4496/25RSS 71
25 Ò Returnable Drum 1261-6747 M/4496/30RSS 71
30 Ò
309
S | Solvents for Chromatography packsize package type Cat. No Mfr. No page
1Ò Glass bottle 1144-8113 C/4756/15
HPLC grade- Solvents and Reagents 2.5 Ò Glass bottle 1079-5321 C/4756/17 85
1Ò Glass bottle 1005-0090 C/4966/15 85
designation Glass bottle 1061-5492 C/4966/17 85
1-Chlorobutane 2.5 Ò Coated Glass bottle 1042-7060 C/4966/PB17 85
Returnable Drum 1263-6677 C/4966/10RSS 85
Chloroform stabilized with amylene 10 Ò Returnable Drum 1264-6677 C/4966/25RSS 85
25 Ò Returnable Drum 1265-6677 C/4966/30RSS 85
Cyclohexane 30 Ò Glass bottle 1036-5360 C/8936/15 85
Di-n-butylamine 1Ò Glass bottle 1076-6091 C/8936/17 99
Di-n-butylamine phosphate Coated Glass bottle 1003-0060 C/8936/PB17 99
1.2-Dichloroethane 2.5 Ò Returnable Drum 1268-6677 C/8936/10RSS 99
Returnable Drum 1267-6677 C/8936/25RSS 99
Dichloromethane unstabilized 10 Ò Returnable Drum 1269-6677 C/8936/30RSS 99
25 Ò Coated Glass bottle 1041-8790 D/1338/PB07 99
Dichloromethane stabilized with amylene 30 Ò Glass bottle 1028-3180 D/1341/05 103
250 mÒ Glass bottle 1076-4751 D/1756/15 104
Dichloromethane stabilised with methanol 100 mÒ Glass bottle 1076-4941 D/1756/17 105
Diethyl ether stabilized with ethanol 1Ò Glass bottle 1011-0342 D/1857/15 105
2.5 Ò Glass bottle 1034-3602 D/1857/17 106
Dimethylformamide 1Ò Coated Glass bottle 1060-1573 D/1857/PB17 106
Returnable Drum 1263-6687 D/1857/10RSS 106
Dimethyl sulfoxide 2.5 Ò Returnable Drum 1266-6687 D/1857/25RSS 106
Returnable Drum 1267-6687 D/1857/30RSS 106
1.4-Dioxane stabilised with BHT 10 Ò Glass bottle 1046-8210 D/1856/15 106
Ethanol absolute 25 Ò Glass bottle 1062-6642 D/1856/17 106
30 Ò Coated Glass bottle 1001-0120 D/1856/PB17 106
Ethyl acetate 1Ò Aluminium can 1003-0120 D/1856/21 106
Ethyl acetate Returnable Drum 1262-6687 D/1856/10RSS 106
Formic acid solution 0.25M 2.5 Ò Returnable Drum 1264-6687 D/1856/25RSS 106
Heptane (approx. 99% n-Heptane) Returnable Drum 1265-6687 D/1856/30RSS 106
5Ò Glass bottle 1058-0442 D/1859/15 106
310 10 Ò Glass bottle 1037-3082 D/1859/17 106
25 Ò Glass bottle 1040-7830 D/2506/15 106
30 Ò Glass bottle 1057-9950 D/2506/17 109
1Ò Coated Glass bottle 1005-0100 D/2506/PB17 109
2.5 Ò Glass bottle 1034-6180 D/3846/15 109
1Ò Glass bottle 1035-6180 D/3846/17 113
Coated Glass bottle 1016-1660 D/3846/PB17 113
2.5 Ò Returnable Drum 1268-6687 D/3846/10RSS 113
Returnable Drum 1260-6697 D/3846/25RSS 113
1Ò Returnable Drum 1269-6687 D/3846/30RSS 113
Coated Glass bottle 1050-0151 D/4125/PB07 113
2.5 Ò Coated Glass bottle 1012-2140 D/4125/PB08 115
Coated Glass bottle 1038-7791 D/4125/PB17 115
10 Ò Returnable Drum 1261-6697 D/4125/10RSS 115
25 Ò Returnable Drum 1262-6697 D/4125/25RSS 115
30 Ò Returnable Drum 1264-6697 D/4125/30RSS 115
250 mÒ Coated Glass bottle 1054-0721 D/4556/PB15 115
500 mÒ Coated Glass bottle 1011-1520 D/4556/PB17 116
2.5 Ò Glass bottle 1054-2382 E/0665DF/15 116
10 Ò Glass bottle 1042-8671 E/0665DF/17 120
25 Ò Returnable Drum 1267-6697 E/0665DF/10RS 120
30 Ò Returnable Drum 1268-6697 E/0665DF/25RS 120
1Ò Returnable Drum 1269-6697 E/0665DF/30RS 120
2.5 Ò Glass bottle 1072-4181 E/0906/15 120
1Ò Glass bottle 1045-6870 E/0906/17 124
2.5 Ò Coated Glass bottle 1004-0140 E/0906/PB17 124
10 Ò Returnable Drum 1261-6707 E/0906/10RSS 124
25 Ò Returnable Drum 1262-6707 E/0906/25RSS 124
30 Ò Returnable Drum 1263-6707 E/0906/30RSS 124
1Ò Glass bottle 1147-8273 E/0907/17 124
Coated Glass bottle 1000-0112 J/4200/PB08 124
2.5 Ò Glass bottle 1066-4912 H/0106/15 133
Glass bottle 1059-8800 H/0106/17 138
10 Ò Coated Glass bottle 1075-7704 H/0106/PB17 138
25 Ò 138
30 Ò
2.5 Ò
500 mÒ
1Ò
2.5 Ò
Solvents for Chromatography | S
HPLC grade- Solvents and Reagents packsize package type Cat. No Mfr. No page
10 Ò Returnable Drum 1267-6707 H/0106/10RSS 138
designation 25 Ò Returnable Drum 1268-6707 H/0106/25RSS 138
Heptane (approx. 99% n-Heptane) 30 Ò Returnable Drum 1269-6707 H/0106/30RSS 138
1Ò Glass bottle 1049-9170 H/0406/15 142
Hexanes (95% n-Hexane approx.) Glass bottle 1070-3611 H/0406/17 142
2.5 Ò Coated Glass bottle 1010-1910 H/0406/PB17 142
Isohexane (contains <5% n-Hexane) Aluminium can 1023-4150 H/0406/21 142
5Ò Returnable Drum 1266-6717 H/0406/10RSS 142
Isopropanol 10 Ò Returnable Drum 1267-6717 H/0406/25RSS 142
25 Ò Returnable Drum 1268-6717 H/0406/30RSS 142
Methanol 30 Ò Coated Glass bottle 1047-9170 H/0405/PB15 166
1Ò Coated Glass bottle 1021-4150 H/0405/PB17 166
Orthophosphoric acid solution 1M 2.5 Ò Aluminium can 1030-6380 H/0405/21 166
5Ò Returnable Drum 1263-6717 H/0405/10RSS 166
Pentane (mixed isomers ) 10 Ò Aluminium can 1199-4411 H/0405/25 166
Returnable Drum 1264-6717 H/0405/25RSS 166
Perchloric acid 60% 25 Ò Returnable Drum 1265-6717 H/0405/30RSS 166
Potassium dihydrogen orthophosphate Glass bottle 1028-4250 P/7507/15 168
Propan-1-ol 30 Ò Glass bottle 1067-4732 P/7507/17 168
Sodium acetate trihydrate 1Ò Coated Glass bottle 1064-1203 P/7507/PB17 168
Sodium chloride Returnable Drum 1266-6757 P/7507/10RSS 168
Sodium dihydrogen orthophosphate 0.25M solution 2.5 Ò Returnable Drum 1267-6757 P/7507/25RSS 168
Sodium formate Returnable Drum 1268-6757 P/7507/30RSS 168
Sodium hydrogen carbonate 10 Ò Glass bottle 1036-5710 M/4056/15 200
di-Sodium hydrogen orthophosphate 0.25M solution 25 Ò Glass bottle 1067-5112 M/4056/17 200
Sodium perchlorate 30 Ò Coated Glass bottle 1067-4922 M/4056/PB17 200
Tetrabutyl ammonium bromide 1Ò Aluminium can 1053-2503 M/4056/21 200
Tetra-n-butyl ammonium hydroxide Returnable Drum 1264-6737 M/4056/10RSS 200
Tetra-n-butyl ammonium hydroxide 2.5 Ò Returnable Drum 1265-6737 M/4056/25RSS 200
Tetradecyltrimethylammonium bromide Returnable Drum 1265-6217 M/4056/30RSS 200
Tetraethylammonium bromide 5Ò Coated Glass bottle 1007-2583 J/5655/PB08 221
10 Ò Glass bottle 1006-0280 P/1006/15 225
Tetrahydrofuran unstabilized 25 Ò Glass bottle 1034-6000 P/1006/17 225
30 Ò Returnable Drum 1267-6747 P/1006/10RSS 225
Tetramethyl ammonium chloride 500 mÒ Returnable Drum 1268-6747 P/1006/25RSS 225
Tetramethyl ammonium hydrogen sulfate 1Ò Returnable Drum 1269-6747 P/1006/30RSS 225
Toluene 2.5 Ò Coated Glass bottle 1025-4490 P/1290/PB05 228
10 Ò Plastic jar 1042-9570 P/4806/50 252
25 Ò Plastic jar 1058-8250 P/4806/60 252
30 Ò Plastic keg 1195-4291 P/4806/70 252
100 mÒ Glass bottle 1044-9760 P/7486/15 264
250 g Glass bottle 1011-1440 P/7486/17 264
1 kg Plastic jar 1012-2400 S/2046/50 281
25 kg Plastic jar 1073-3704 S/2046/60 281
1Ò Plastic jar 1027-4392 S/3165/53 285
2.5 Ò Coated Glass bottle 1008-2583 J/7600/PB08 289
250 g Plastic jar 1010-2690 S/4086/50 290
1 kg Plastic jar 1058-8820 S/4246/50 291
500 g Coated Glass bottle 1050-3484 J/7650/PB08 293
500 mÒ Plastic jar 1033-6150 S/5966/50 301
250 g Plastic jar 1021-4500 T/0476/46 343
250 g HDPE Plastic bottle 1026-4590 T/0486/07 343
500 mÒ HDPE Plastic bottle 1036-6150 T/0481/07 343
250 g Plastic jar 1074-3811 T/0611/46 345
25 g Plastic jar 1074-4001 T/0621/46 345
250 mÒ Coated Glass bottle 1026-4350 T/0706/PB15 345
250 mÒ Coated Glass bottle 1057-8070 T/0706/PB17 345
25 g Returnable Drum 1266-6777 T/0706/10RSS 345
25 g Returnable Drum 1268-6777 T/0706/25RSS 345
1Ò Returnable Drum 1260-6787 T/0706/30RSS 345
2.5 Ò Plastic jar 1044-7270 T/0931/46 346
10 Ò Glass jar 1009-0410 T/0935/44 347
25 Ò Glass bottle 1015-2830 T/2306/15 353
30 Ò Glass bottle 1004-0500 T/2306/17 353
25 g Returnable Drum 1261-6787 T/2306/10RSS 353
5g Returnable Drum 1263-6787 T/2306/25RSS 353
1Ò
2.5 Ò 311
10 Ò
25 Ò
S | Solvents for Chromatography packsize package type Cat. No Mfr. No page
30 Ò Returnable Drum 1264-6787 T/2306/30RSS
HPLC grade- Solvents and Reagents 250 mÒ Glass bottle 1062-5892 T/3203/07 353
25 mÒ Coated Glass bottle 1011-2740 T/3258/04 357
designation 100 mÒ Coated Glass bottle 1029-4110 T/3258/PB05 358
Toluene 500 mÒ Coated Glass bottle 1010-4953 J/8800/PB08 358
Triethylamine 100 mÒ Coated Glass bottle 1065-6272 T/3296/PB05 359
Trifluoroacetic acid 1Ò Glass bottle 1058-9580 T/3606/15 359
Trifluoroacetic acid solution 1% 2.5 Ò Glass bottle 1025-4210 T/3606/17 360
Tri-n-hexylamine 5Ò Aluminium can 1026-4210 T/3606/21 360
10 Ò Returnable Drum 1265-6787 T/3606/10RSS 360
2.2,4-Trimethylpentane 25 Ò Returnable Drum 1266-6787 T/3606/25RSS 360
30 Ò Returnable Drum 1267-6787 T/3606/30RSS 360
360
Other Applications & Grades- Solvents and Reagents
designation packsize package type Cat. No Mfr. No page
Acetic acid glacial 500 mÒ Coated Glass bottle 1023-3800 A/0407/PB08 13
1Ò Coated Glass bottle 1004-0010 A/0630/PB15 20
Acetonitrile HPLC for fluorescence detection 2.5 Ò Coated Glass bottle 1032-5120 A/0630/PB17 20
1Ò Coated Glass bottle 1142-3503 A/0635/PB15 20
Acetonitrile HPLC for electrochemical detection 2.5 Ò Coated Glass bottle 1042-7630 A/0635/PB17 20
250 g Plastic jar 1039-5210 A/3450/50 36
Ammonium acetate 500 g Plastic jar 1037-5360 C/6230/53 90
Citric acid monohydrate 2.5 Ò Glass bottle 1013-1430 J/3710/17 127
Ethylenediaminetetraacetic acid disodium salt solution 0.2N 1Ò Glass bottle 1068-4912 H/0107/15 139
2.5 Ò Glass bottle 1035-5750 H/0107/17 139
Heptane (approx. 99% n-Heptane) 1Ò Coated Glass bottle 1064-7602 H/0409/PB15 142
2.5 Ò Coated Glass bottle 1040-9370 H/0409/PB17 142
Hexanes (95% n-Hexane approx.) 1Ò Coated Glass bottle 1018-1950 H/0410/PB15 166
2.5 Ò Coated Glass bottle 1071-3801 H/0410/PB17 166
Isohexane (contains <5% n-Hexane) 2.5 Ò Glass bottle 1054-9010 P/7509/17 168
2.5 Ò Coated Glass bottle 1017-2100 M/4057/PB17 200
Isopropanol 2.5 Ò Coated Glass bottle 1071-4191 M/4059/PB17 201
Methanol HPLC for fluorescence detection 500 mÒ Coated Glass bottle 1064-4732 O/0515/PB08 221
Methanol HPLC for electrochemical detection 250 g Plastic jar 1059-8250 P/4810/50 252
Orthophosphoric acid 85% 250 g Plastic jar 1053-9390 S/2052/50 281
Potassium dihydrogen orthophosphate 500 g Plastic jar 1003-0520 S/3380/53 287
Sodium acetate trihydrate 500 g Plastic jar 1001-0340 S/3770/53 289
tri-Sodium citrate dihydrate 500 g Plastic jar 1077-6491 S/4460/53 292
Sodium dihydrogen orthophosphate dihydrate 2.5 Ò HDPE Plastic bottle 1005-0470 S/4940/17 295
di-Sodium hydrogen orthophosphate dihydrate 2.5 Ò Glass bottle 1063-7042 W/0107/17 368
Sodium hydroxide 46-48% solution 2.5 Ò Glass bottle 1070-6501 W/0108/17 368
Water HPLC for fluorescence detection
Water HPLC for electrochemical detection
312
Sorbitol | S
Sorbic acid SLR
specified reagents for general laboratory work- extra pure Mfr. No
S/7390/48
packaging Cat. No
100 g Plastic jar 1010-2260
C6H8O2 EINECS: 203-768-7
CAS: 110-44-1 GHS: Skin Irrit. 2, Eye Irrit. 2,
MW: 112.13 STOT SE 3
Density at 20°C: 1.2 H315, H335, H319
Melting point: 132 to 135 °C P261, P302+P352, P280,
Flash point: 127 °C P305+P351+P338
Assay: >98.5%
Sorbitol SLR, Eur.Ph., USP
specified reagents for general laboratory work- extra pure
packaging Cat. No Mfr. No
1045-9760 S/7400/53
500 g Plastic jar 1036-5860 S/7400/63
3 kg Plastic jar 1145-2934 S/7400/70
25 kg Plastic keg Density at 20°C: 1.489
Melting point: 95 to 99 °C 95 to 100 °C
C6H14O6 EINECS: 200-061-5
CAS: 50-70-4
MW: 182.18 <2% Melting Point tested
<0.1%
Guaranteed analysis
Water
Residue after ignition
313
S | Standard Elemental solution for Trace Metal analysis
Fisher Chemical Standard mono-element solution for AAS
Manufactured to a tolerance of ± 0.5%
See alphabetical entry in the main body of this catalogue for full details
designation matrix packsize package type Cat. No Mfr. No page
Aluminium standard metal solution 1000 ppm HNO3 1 mol/l 100 mÒ HDPE Plastic bottle 1056-2562 J/8000/05 27
Antimony standard metal solution 1000 ppm HNO3 1 mol/l 500 mÒ HDPE Plastic bottle 1008-0220 J/8000/08 27
Arsenic standard metal solution 1000 ppm HCl 1 mol/l 100 mÒ HDPE Plastic bottle 1064-1533 J/8002/05 49
Barium standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1021-4010 J/8002/08 49
Boron standard metal solution 1000 ppm HCl 1 mol/l 100 mÒ HDPE Plastic bottle 1063-0423 J/8003/05 50
Cadmium standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1050-8810 J/8003/08 50
Calcium standard metal solution 1000 ppm HCl 1 mol/l 100 mÒ HDPE Plastic bottle 1062-1003 J/8004/05 52
Chromium standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1010-1960 J/8004/08 52
Cobalt standard metal solution 1000 ppm HCl 1 mol/l 100 mÒ HDPE Plastic bottle 1061-9852 J/8006/05 59
Copper standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1032-6430 J/8006/08 59
Gold standard metal solution 1000 ppm HNO3 1 mol/l 100 mÒ HDPE Plastic bottle 1044-6952 J/8005/05 71
Iron standard metal solution 1000 ppm HNO3 1 mol/l 500 mÒ HDPE Plastic bottle 1046-9560 J/8005/08 71
Lead standard metal solution 1000 ppm H2O 100 mÒ HDPE Plastic bottle 1048-6801 J/8010/05 73
Lithium standard metal solution 1000 ppm H2O 500 mÒ HDPE Plastic bottle 1006-0230 J/8010/08 73
Magnesium standard metal solution 1000 ppm HNO3 1 mol/l 100 mÒ HDPE Plastic bottle 1010-2402 J/8015/05 87
Manganese standard metal solution 1000 ppm HNO3 1 mol/l 500 mÒ HDPE Plastic bottle 1072-4761 J/8015/08 87
Mercury standard metal solution 1000 ppm HNO3 1 mol/l 100 mÒ HDPE Plastic bottle 1077-4593 J/8020/05 91
Molybdenum standard metal solution 1000 ppm HNO3 1 mol/l 500 mÒ HDPE Plastic bottle 1065-6452 J/8020/08 91
Nickel standard metal solution 1000 ppm HNO3 1 mol/l 100 mÒ HDPE Plastic bottle 1074-3173 J/8025/05 94
Potassium standard metal solution 1000 ppm HNO3 1 mol/l 500 mÒ HDPE Plastic bottle 1041-8220 J/8025/08 94
Selenium standard metal solution 1000 ppm HNO3 1 mol/l 500 mÒ HDPE Plastic bottle 1013-1670 J/8028/08 137
Silicon standard metal solution 1000 ppm HNO3 1 mol/l 100 mÒ HDPE Plastic bottle 1053-3142 J/8030/05 162
Silver standard metal solution 1000 ppm HNO3 1 mol/l 500 mÒ HDPE Plastic bottle 1009-0190 J/8030/08 162
Sodium standard metal solution 1000 ppm HNO3 1 mol/l 100 mÒ HDPE Plastic bottle 1016-2442 J/8035/05 177
Strontium standard metal solution 1000 ppm HCl 1 mol/l 500 mÒ HDPE Plastic bottle 1026-4530 J/8035/08 177
Tellurium standard metal solution 1000 ppm 100 mÒ HDPE Plastic bottle 1032-5992 J/8037/05 182
Tin standard metal solution 1000 ppm HNO3 1 mol/l 500 mÒ HDPE Plastic bottle 1033-6140 J/8037/08 182
Titanium standard metal solution 1000 ppm HNO3 1 mol/l 100 mÒ HDPE Plastic bottle 1011-9701 J/8040/05 186
Tungsten standard metal solution 1000 ppm HNO3 1 mol/l 500 mÒ HDPE Plastic bottle 1017-1760 J/8040/08 186
Vanadium standard metal solution 1000 ppm HNO3 1 mol/l 100 mÒ HDPE Plastic bottle 1038-2562 J/8045/05 191
Zinc standard metal solution 1000 ppm HNO3 1 mol/l 500 mÒ HDPE Plastic bottle 1044-8410 J/8045/08 191
Zirconium standard metal solution 1000 ppm HNO3 1 mol/l 100 mÒ HDPE Plastic bottle 1002-0652 J/8047/05 194
HNO3 1 mol/l 500 mÒ HDPE Plastic bottle 1001-0200 J/8047/08 194
HNO3 1 mol/l 100 mÒ HDPE Plastic bottle 1069-1183 J/8050/05 209
HNO3 1 mol/l 500 mÒ HDPE Plastic bottle 1016-1810 J/8050/08 209
HNO3 1 mol/l 100 mÒ HDPE Plastic bottle 1037-9431 J/8055/05 212
HNO3 1 mol/l 500 mÒ HDPE Plastic bottle 1005-0200 J/8055/08 212
HNO3 1 mol/l 100 mÒ HDPE Plastic bottle 1016-9601 J/8060/05 245
HNO3 0.1 mol/l 500 mÒ HDPE Plastic bottle 1044-8600 J/8060/08 245
HNO3 0.1 mol/l 100 mÒ HDPE Plastic bottle 1018-2442 J/8061/05 273
HNO3 1 mol/l 500 mÒ HDPE Plastic bottle 1045-8600 J/8061/08 273
HNO3 1 mol/l 100 mÒ HDPE Plastic bottle 1021-4062 J/8062/05 275
HNO3 1 mol/l 500 mÒ HDPE Plastic bottle 1003-0220 J/8062/08 275
HNO3 1 mol/l 100 mÒ HDPE Plastic bottle 1015-2492 J/8064/05 276
HNO3 1 mol/l 500 mÒ HDPE Plastic bottle 1056-8050 J/8064/08 276
HNO3 1 mol/l 100 mÒ HDPE Plastic bottle 1060-0233 J/8065/05 279
H2O 500 mÒ HDPE Plastic bottle 1048-8980 J/8065/08 279
H2O 500 mÒ HDPE Plastic bottle 1053-8430 J/8166/08 331
HNO3 1 mol/l 100 mÒ HDPE Plastic bottle 1056-9652 J/8100/05 342
HNO3 1 mol/l 500 mÒ HDPE Plastic bottle 1040-9180 J/8100/08 342
HNO3 1 mol/l 100 mÒ HDPE Plastic bottle 1055-9652 J/8067/05 349
HNO3 1 mol/l 500 mÒ HDPE Plastic bottle 1065-7222 J/8067/08 349
HNO3 1 mol/l 100 mÒ HDPE Plastic bottle 1061-1193 J/8110/05 351
HCl 20% 500 mÒ HDPE Plastic bottle 1073-5911 J/8110/08 351
100 mÒ HDPE Plastic bottle 1016-2492 J/8120/05 363
HCl 20% 500 mÒ HDPE Plastic bottle 1066-7412 J/8120/08 363
100 mÒ HDPE Plastic bottle 1073-9814 J/8150/05 366
HCl 1 mol/l 500 mÒ HDPE Plastic bottle 1020-4010 J/8150/08 366
100 mÒ HDPE Plastic bottle 1017-9031 J/8070/05 373
HCl 1 mol/l 500 mÒ HDPE Plastic bottle 1040-8990 J/8070/08 373
500 mÒ HDPE Plastic bottle 1067-7602 J/8200/08 377
HCl 2 mol/l
HCl 2 mol/l
NH3 0.1 mol/l
NH3 0.1 mol/l
HNO3 1 mol/l
HNO3 1 mol/l
HNO3 1 mol/l
HNO3 1 mol/l
HCl 1 mol/l
314
Standard Elemental solution for Trace Metal analysis | S
Fisher Chemical Standard mono-element solution for ICP
Manufactured to a tolerance of ± 0.5% packsize package type Cat. No Mfr. No page
500 mÒ HDPE Plastic bottle 1000-0230 J/8206/08 27
All standards are manufactured from Ultra-pure metals/acids 100 mÒ HDPE Plastic bottle 1033-6380 J/8205/05 27
All standards are guaranteed to contain <10 ppm total metal impurites 500 mÒ HDPE Plastic bottle 1004-0230 J/8215/08 49
See alphabetical entry in the main body of this catalogue for full details 100 mÒ HDPE Plastic bottle 1068-7602 J/8210/05 49
500 mÒ HDPE Plastic bottle 1029-4050 J/8221/08 52
designation 100 mÒ HDPE Plastic bottle 1069-7602 J/8220/05 52
Aluminium standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1018-2000 J/8231/08 59
Aluminium standard metal solution 10 000 ppm 100 mÒ HDPE Plastic bottle 1060-4732 J/8230/05 59
Antimony standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1033-5710 J/8236/08 71
Antimony standard metal solution 10 000 ppm 100 mÒ HDPE Plastic bottle 1076-6101 J/8235/05 72
Barium standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1009-0210 J/8241/08 73
Barium standard metal solution 10 000 ppm 100 mÒ HDPE Plastic bottle 1070-4571 J/8240/05 73
Boron standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1015-1620 J/8246/08 87
Boron standard metal solution 10 000 ppm 100 mÒ HDPE Plastic bottle 1034-6090 J/8245/05 88
Cadmium standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1036-6090 J/8251/08 91
Cadmium standard metal solution 10 000 ppm 100 mÒ HDPE Plastic bottle 1035-6090 J/8250/05 91
Calcium standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1072-4951 J/8256/08 94
Calcium standard metal solution 10 000 ppm 100 mÒ HDPE Plastic bottle 1011-1670 J/8255/05 94
Chromium standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1019-1710 J/8271/08 162
Chromium standard metal solution 10 000 ppm 100 mÒ HDPE Plastic bottle 1058-8610 J/8270/05 162
Cobalt standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1050-8620 J/8276/08 178
Cobalt standard metal solution 10 000 ppm 100 mÒ HDPE Plastic bottle 1059-8610 J/8275/05 178
Copper standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1010-1720 J/8281/08 183
Copper standard metal solution 10 000 ppm 100 mÒ HDPE Plastic bottle 1027-4530 J/8280/05 183
Iron standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1023-4580 J/8286/08 186
Iron standard metal solution 10000 ppm 100 mÒ HDPE Plastic bottle 1067-6452 J/8285/05 186
Lead standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1077-5331 J/8291/08 191
Lead standard metal solution 10 000 ppm 100 mÒ HDPE Plastic bottle 1051-8430 J/8290/05 191
Lithium standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1061-6842 J/8293/08 194
Lithium standard metal solution 10 000 ppm 100 mÒ HDPE Plastic bottle 1078-5331 J/8292/05 194
Magnesium standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1063-7222 J/8296/08 209
Magnesium standard metal solution 10 000 ppm 100 mÒ HDPE Plastic bottle 1047-8790 J/8294/05 209
Manganese standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1023-4630 J/8297/08 212
Manganese standard metal solution 10 000 ppm 100 mÒ HDPE Plastic bottle 1038-6230 J/8295/05 212
Mercury standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1017-1810 J/8299/08 242
Mercury standard metal solution 10 000 ppm 100 mÒ HDPE Plastic bottle 1054-8050 J/8298/05 242
Molybdenum standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1006-0200 J/8301/08 246
Molybdenum standard metal solution 10000 ppm 100 mÒ HDPE Plastic bottle 1024-4580 J/8300/05 246
Nickel standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1042-8410 J/8306/08 273
Nickel standard metal solution 10 000 ppm 100 mÒ HDPE Plastic bottle 1076-5331 J/8305/05 273
Phosphorus standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1000-0200 J/8310/08 276
Phosphorus standard metal solution 10 000 ppm 100 mÒ HDPE Plastic bottle 1018-1760 J/8309/05 276
Potassium standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1021-4630 J/8316/08 279
Potassium standard metal solution 10 000 ppm 100 mÒ HDPE Plastic bottle 1078-5521 J/8315/05 280
Selenium standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1070-5531 J/8321/08 331
Selenium standard metal solution 10 000 ppm 100 mÒ HDPE Plastic bottle 1079-5521 J/8320/05 332
Silver standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1046-7450 J/8324/08 335
Silver standard metal solution 10 000 ppm 100 mÒ HDPE Plastic bottle 1012-1480 J/8323/05 335
Sodium standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1062-5692 J/8327/08 342
Sodium standard metal solution 10 000 ppm 500 mÒ HDPE Plastic bottle 1028-4290 J/8326/08 349
Strontium standard metal solution 1000 ppm 100 mÒ HDPE Plastic bottle 1056-8430 J/8325/05 349
Strontium standard metal solution 10 000 ppm 500 mÒ HDPE Plastic bottle 1062-5882 J/8331/08 352
Sulfur standard standard metal solution 1000 ppm 100 mÒ HDPE Plastic bottle 1034-5950 J/8330/05 352
Sulfur standard standard metal solution 10 000 ppm 500 mÒ HDPE Plastic bottle 1031-6000 J/8336/08 363
Tellurium standard metal solution 1000 ppm 500 mÒ HDPE Plastic bottle 1071-4571 J/8341/08 373
Tin standard metal solution 1000 ppm 100 mÒ HDPE Plastic bottle 1026-4340 J/8340/05 373
Tin standard metal solution 10 000 ppm
Titanium standard metal solution 1000 ppm 315
Titanium standard metal solution 10 000 ppm
Tungsten standard metal solution 1000 ppm
Zinc standard metal solution 1000 ppm
Zinc standard metal solution 10 000 ppm
S | Standard Elemental solution for Trace Metal analysis
SPEX Standard mono-element solution for ICP & ICP-MS
NIST Certified, manufactured to a tolerance of ± 0.5%
All standards are manufactured from Ultra-pure metals/salts
Actual measured impurities of up to 30 elements
See alphabetical entry in the main body of this catalogue for full details
High purity acids for elemental analysis
designation matrix packsize package type Cat. No Mfr. No page
100 mÒ Plastic bottle 1142-8619 SPPLAL22Y 28
Aluminium standard metal so- for ICP solution in HNO3 2% 250 mÒ Plastic bottle 1192-9442 SPPLAL22T 28
lution 1000 ppm for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1193-9442 SPPLAL22X 28
500 mÒ Plastic bottle 1190-9442 SPPLAL12X 28
Aluminium standard metal so- for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1195-9442 SPPLAL23Y 28
lution 1000 ppm for ICP solution in HCL 2% 500 mÒ Plastic bottle 1194-9442 SPPLAL23X 28
500 mÒ Plastic bottle 1191-9442 SPPLAL13X 28
Aluminium standard metal so- for ICP solution in HNO3 5% 100 mÒ Plastic bottle 1149-5968 SPCLAL22Y 28
lution 10 000 ppm for ICP solution in HNO3 5% 100 mÒ Plastic bottle 1148-5998 SPCLSB72Y 49
for ICP solution in HCL 5% 100 mÒ Plastic bottle 1190-3693 SPPLSB72Y 49
Aluminium standard metal so- for ICP-MS solution in HNO3 2% 250 mÒ Plastic bottle 1198-3683 SPPLSB72T 49
lution 10 000 ppm for ICP-MS solution in H2O/0.6% Tartaric Acid/HNO3 trace 500 mÒ Plastic bottle 1199-3683 SPPLSB72X 49
Aluminium standard metal so- 100 mÒ Plastic bottle 1192-3693 SPPLSB73Y 49
lution 1000 ppm 500 mÒ Plastic bottle 1191-3693 SPPLSB73X 49
Antimony standard metal so- 500 mÒ Plastic bottle 1148-8819 PLSB53X 50
lution 1000 ppm 100 mÒ Plastic bottle 1198-9442 SPPLAS22Y 50
250 mÒ Plastic bottle 1146-8619 SPPLAS22T 50
Antimony standard metal so- for ICP solution in H2O/0.6% Tartaric Acid/HNO3 trace 500 mÒ Plastic bottle 1197-9442 SPPLAS22X 50
lution 1000 ppm for ICP solution in H2O/0.6% Tartaric Acid/HNO3 trace 500 mÒ Plastic bottle 1196-9442 SPPLAS12X 51
100 mÒ Plastic bottle 1190-9452 SPPLAS23Y 51
for ICP solution in H2O/0.6% Tartaric Acid/HNO3 trace 500 mÒ Plastic bottle 1199-9442 SPPLAS23X 51
100 mÒ Plastic bottle 1140-5978 SPCLAS22Y 51
Antimony standard metal so- for ICP solution in H2O/0.6% Tartaric Acid/HNO3 trace 100 mÒ Plastic bottle 1196-9452 SPPLBA22Y 52
lution 10 000 ppm for ICP solution in H2O/0.6% Tartaric Acid/HNO3 trace 250 mÒ Plastic bottle 1194-9452 SPPLBA22T 52
for ICP solution in HCL 20% 500 mÒ Plastic bottle 1195-9452 SPPLBA22X 52
Antimony standard metal so- for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1148-8629 PLBA12X 53
lution 10 000 ppm for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1198-9452 SPPLBA23Y 53
for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1197-9452 SPPLBA23X 53
Arsenic standard metal solu- for ICP solution in HCL 2% 100 mÒ Plastic bottle 1142-5978 SPCLBA22Y 53
tion 1000 ppm for ICP solution in HNO3 5% 100 mÒ Plastic bottle 1191-9462 SPPLBE22Y 57
for ICP solution in HNO3 5% 250 mÒ Plastic bottle 1199-9452 SPPLBE22T 57
Arsenic standard metal solu- for ICP-MS solution in HNO3 2% 500 mÒ Plastic bottle 1190-9462 SPPLBE22X 57
tion 1000 ppm for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1193-9462 SPPLBE23Y 57
for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1192-9462 SPPLBE23X 57
Arsenic standard metal solu- for ICP solution in HNO3 2%
tion 10 000 ppm for ICP solution in HCL 2%
for ICP solution in HNO3 5%
Arsenic standard metal solu- for ICP solution in HNO3 5%
tion 1000 ppm for ICP-MS solution in HNO3 2%
for ICP solution in HNO3 2%
Barium standard metal solu- for ICP solution in HNO3 2%
tion 1000 ppm for ICP solution in HNO3 2%
Barium standard metal solu-
tion 1000 ppm
Barium standard metal solu-
tion 10 000 ppm
Barium standard metal solu-
tion 1000 ppm
Beryllium standard metal solu-
tion 1000 ppm
Beryllium standard metal solu- for ICP solution in HNO3 5%
tion 10 000 ppm for ICP solution in HNO3 5%
316
Standard Elemental solution for Trace Metal analysis | S
SPEX Standard mono-element solution for ICP & ICP-MS
designation matrix packsize package type Cat. No Mfr. No page
Beryllium standard metal solution 1000 ppm 100 mÒ Plastic bottle 1143-5978 SPCLBE22Y 57
Bismuth standard metal solution 1000 ppm for ICP-MS solution in HNO3 2% 100 mÒ Plastic bottle 1195-9462 SPPLBI42Y 58
Bismuth standard metal solution 10 ppm for ICP solution in HNO3 10% 500 mÒ Plastic bottle 1194-9462 SPPLBI42X 58
for ICP solution in HNO3 10% 100 mÒ Plastic bottle 1144-5978 SPCLBI21AY 58
Boron standard metal solution 1000 ppm for ICP-MS solution in HNO3 2% 100 mÒ Plastic bottle 1145-8629 SPPLB92Y 59
for ICP solution in H2O 250 mÒ Plastic bottle 1196-9462 SPPLB92T 59
Boron standard metal solution 10 000 ppm for ICP solution in H2O 500 mÒ Plastic bottle 1197-9462 SPPLB92X 59
for ICP solution in H2O 100 mÒ Plastic bottle 1199-9462 SPPLB93Y 60
Cadmium standard metal solution 1000 ppm for ICP solution in H2O 500 mÒ Plastic bottle 1198-9462 SPPLB93X 60
for ICP solution in H2O 100 mÒ Plastic bottle 1190-9482 SPPLCD22Y 72
Cadmium standard metal solution 1000 ppm for ICP solution in HNO3 2% 250 mÒ Plastic bottle 1198-9472 SPPLCD22T 72
Cadmium standard metal solution 10 000 ppm for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1199-9472 SPPLCD22X 72
Cadmium standard metal solution 1000 ppm for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1147-8659 PLCD12X 72
Calcium standard metal solution 1000 ppm for ICP solution in HCL 2% 100 mÒ Plastic bottle 1192-9482 SPPLCD23Y 72
Calcium standard metal solution 1000 ppm 500 mÒ Plastic bottle 1191-9482 SPPLCD23X 72
for ICP solution in HNO3 5% 100 mÒ Plastic bottle 1141-5988 SPCLCD22Y 72
Calcium standard metal solution 10 000 ppm for ICP solution in HNO3 5% 100 mÒ Plastic bottle 1193-9472 SPPLCA22Y 73
for ICP-MS solution in HNO3 2% 250 mÒ Plastic bottle 1192-9472 SPPLCA22T 73
Calcium standard metal solution 10 000 ppm for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1190-9472 SPPLCA12X 74
Calcium standard metal solution 1000 ppm for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1196-9472 SPPLCA23Y 74
Carbon standard solution 1000 ppm for ICP solution in HCL 2% 250 mÒ Plastic bottle 1194-9472 SPPLCA23T 74
500 mÒ Plastic bottle 1195-9472 SPPLCA23X 74
Cerium standard metal solution 1000 ppm for ICP solution in HNO3 5% 500 mÒ Plastic bottle 1191-9472 SPPLCA13X 74
for ICP solution in HNO3 5% 100 mÒ Plastic bottle 1140-5988 SPCLCA22Y 74
Cerium standard metal solution 10 000 ppm for ICP solution in HNO3 5% 100 mÒ Plastic bottle 1193-9512 SPPLC92Y 78
for ICP solution in HCL 5% 500 mÒ Plastic bottle 1192-9512 SPPLC92X 78
Cesium standard metal solution 1000 ppm 100 mÒ Plastic bottle 1194-9482 SPPLCE22Y 80
for ICP-MS solution in HNO3 2% 500 mÒ Plastic bottle 1193-9482 SPPLCE22X 80
Cesium standard metal solution 10 000 ppm for ICP solution in H2O 100 mÒ Plastic bottle 1196-9482 SPPLCE23Y 80
for ICP solution in H2O 500 mÒ Plastic bottle 1195-9482 SPPLCE23X 80
Chromium standard metal solution 1000 ppm for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1192-9502 SPPLCS22Y 81
for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1191-9502 SPPLCS22X 81
Chromium standard metal solution 1000 ppm for ICP solution in HNO3 5% 100 mÒ Plastic bottle 1194-9502 SPPLCS23Y 81
Chromium standard metal solution 1000 ppm for ICP solution in HNO3 5% 500 mÒ Plastic bottle 1193-9502 SPPLCS23X 81
Chromium standard metal solution 10 000 ppm for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1196-9492 SPPLCR22Y 88
Chromium standard metal solution 10 000 ppm for ICP solution in HNO3 2% 250 mÒ Plastic bottle 1194-9492 SPPLCR22T 88
Chromium standard metal solution 10 000 ppm for ICP solution in HNO3 5% 500 mÒ Plastic bottle 1195-9492 SPPLCR22X 88
Chromium standard metal solution 1000 ppm for ICP solution in HNO3 5% 500 mÒ Plastic bottle 1192-9492 SPPLCR12X 88
for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1199-9492 SPPLCR92X 88
Cobalt standard metal solution 1000 ppm for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1198-9492 SPPLCR23Y 88
for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1197-9492 SPPLCR23X 88
Cobalt standard metal solution 1000 ppm for ICP solution in HCL 2% 500 mÒ Plastic bottle 1144-8679 PLCR13X 88
Cobalt standard metal solution 10 000 ppm 500 mÒ Plastic bottle 1190-9502 SPPLCR93X 88
Cobalt standard metal solution 1000 ppm for ICP solution in H2O 100 mÒ Plastic bottle 1143-5988 SPCLCR22Y 88
for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1140-8679 SPPLCO22Y 91
Copper standard metal solution 1000 ppm for ICP solution in HNO3 5% 250 mÒ Plastic bottle 1198-9482 SPPLCO22T 91
for ICP solution in HCL 5% 500 mÒ Plastic bottle 1199-9482 SPPLCO22X 91
Copper standard metal solution 1000 ppm 500 mÒ Plastic bottle 1197-9482 SPPLCO12X 91
Copper standard metal solution 10 000 ppm for ICP solution in H2O 100 mÒ Plastic bottle 1191-9492 SPPLCO23Y 92
Copper standard metal solution 10 000 ppm for ICP-MS solution in HNO3 2% 500 mÒ Plastic bottle 1190-9492 SPPLCO23X 92
Copper standard metal solution 1000 ppm for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1142-5988 SPCLCO22Y 92
Dysprosium standard metal solution 1000 ppm for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1199-9502 SPPLCU22Y 95
for ICP solution in HNO3 2% 250 mÒ Plastic bottle 1197-9502 SPPLCU22T 95
Erbium standard metal solution 1000 ppm for ICP solution in HCL 2% 500 mÒ Plastic bottle 1198-9502 SPPLCU22X 95
500 mÒ Plastic bottle 1195-9502 SPPLCU12X 95
Erbium standard metal solution 10 000 ppm for ICP solution in HNO3 5% 100 mÒ Plastic bottle 1191-9512 SPPLCU23Y 95
for ICP solution in HNO3 5% 500 mÒ Plastic bottle 1190-9512 SPPLCU23X 95
for ICP-MS solution in HNO3 2% 500 mÒ Plastic bottle 1196-9502 SPPLCU13X 95
for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1144-5988 SPCLCU22Y 95
for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1195-9512 SPPLDY22Y 119
for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1194-9512 SPPLDY22X 119
for ICP solution in HCL 2% 100 mÒ Plastic bottle 1197-9512 SPPLER22Y 119
500 mÒ Plastic bottle 1196-9512 SPPLER22X 119
for ICP solution in HNO3 5% 100 mÒ Plastic bottle 1044-6752 SPPLER23Y 119
for ICP solution in HNO3 5% 500 mÒ Plastic bottle 1198-9512 SPPLER23X 119
for ICP solution in HCL 5%
317
for ICP-MS solution in HNO3 2%
for ICP solution in HNO3 2%
for ICP solution in HNO3 2%
for ICP solution in HNO3 2%
for ICP solution in HNO3 2%
for ICP solution in HNO3 5%
for ICP solution in HNO3 5%
S | Standard Elemental solution for Trace Metal analysis
SPEX Standard mono-element solution for ICP & ICP-MS
designation matrix packsize package type Cat. No Mfr. No page
Europium standard metal solution 1000 ppm for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1191-9522 SPPLEU22Y 128
for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1190-9522 SPPLEU22X 128
Gadolinium standard metal solution 1000 ppm for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1190-9532 SPPLGD22Y 134
for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1199-9522 SPPLGD22X 134
Gadolinium standard metal solution 10 000 ppm for ICP solution in HNO3 5% 100 mÒ Plastic bottle 1192-9532 SPPLGD23Y 134
for ICP solution in HNO3 5% 500 mÒ Plastic bottle 1191-9532 SPPLGD23X 134
Gallium standard metal solution 1000 ppm for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1198-9522 SPPLGA22Y 134
for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1197-9522 SPPLGA22X 134
Germanium standard metal solution 1000 ppm for ICP solution in H2O/HF trace 100 mÒ Plastic bottle 1194-9532 SPPLGE92Y 134
Germanium standard metal solution 10 ppm for ICP solution in H2O/HF trace 500 mÒ Plastic bottle 1193-9532 SPPLGE92X 134
Gold standard metal solution 1000 ppm for ICP-MS solution in H2O/HF trace 100 mÒ Plastic bottle 1146-5988 SPCLGE91AY 134
Gold standard metal solution 1000 ppm for ICP solution in HCL 10% 100 mÒ Plastic bottle 1192-9452 SPPLAU32Y 137
Hafnium standard metal solution 1000 ppm 500 mÒ Plastic bottle 1191-9452 SPPLAU32X 137
Hafnium standard metal solution 10 000 ppm for ICP solution in HCL 10% 100 mÒ Plastic bottle 1141-5978 SPCLAU11Y 137
Holmium standard metal solution 1000 ppm 100 mÒ Plastic bottle 1196-9532 SPPLHF12Y 138
for ICP-MS solution in HCl 2% 500 mÒ Plastic bottle 1195-9532 SPPLHF12X 138
Indium standard metal solution 1000 ppm 500 mÒ Plastic bottle 1003-0432 SPPLHF13X
Indium standard metal solution 10 ppm for ICP solution in HCL 2% 100 mÒ Plastic bottle 1196-9542 SPPLHO22Y 144
Iridium standard metal solution 1000 ppm 500 mÒ Plastic bottle 1195-9542 SPPLHO22X 144
for ICP solution in HCL 2% 100 mÒ Plastic bottle 1198-9542 SPPLIN22Y 160
Iron standard metal solution 1000 ppm 500 mÒ Plastic bottle 1197-9542 SPPLIN22X 160
for ICP solution in HCL 5% 100 mÒ Plastic bottle 1192-9432 SPCLIN21AY 160
Iron standard metal solution 1000 ppm 100 mÒ Plastic bottle 1190-9552 SPPLIR32Y 162
Iron standard metal solution 10 000 ppm for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1199-9542 SPPLIR32X 162
Iron standard metal solution 10 000 ppm for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1145-8709 SPPLFE22Y 162
Iron standard metal solution 1000 ppm for ICP solution in HNO3 2% 250 mÒ Plastic bottle 1194-9522 SPPLFE22T 162
Lanthanum standard metal solution 1000 ppm for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1144-8709 SPPLFE22X 162
for ICP-MS solution in HNO3 2% 500 mÒ Plastic bottle 1192-9522 SPPLFE12X 162
Lanthanum standard metal solution 10 000 ppm for ICP solution in HCL 10% 100 mÒ Plastic bottle 1196-9522 SPPLFE23Y 163
500 mÒ Plastic bottle 1195-9522 SPPLFE23X 163
Lead standard metal solution 1000 ppm for ICP solution in HCL 10% 500 mÒ Plastic bottle 1193-9522 SPPLFE13X 163
100 mÒ Plastic bottle 1145-5988 SPCLFE22Y 163
Lead standard metal solution 10 000 ppm for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1199-9552 SPPLLA22Y 176
Lead standard metal solution 1000 ppm for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1198-9552 SPPLLA22X 176
Lithium standard metal solution 1000 ppm for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1191-9562 SPPLLA23Y 177
Lithium standard metal solution 1000 ppm for ICP solution in HCL 2% 500 mÒ Plastic bottle 1190-9562 SPPLLA23X 177
Lithium standard metal solution 10 000 ppm 100 mÒ Plastic bottle 1195-3663 SPPLPB22Y 178
Lithium standard metal solution 10 000 ppm for ICP solution in HNO3 5% 250 mÒ Plastic bottle 1193-3663 SPPLPB22T 178
Lutetium standard metal solution 1000 ppm for ICP solution in HNO3 5% 500 mÒ Plastic bottle 1194-3663 SPPLPB22X 178
for ICP solution in HCL 5% 100 mÒ Plastic bottle 1197-3663 SPPLPB23Y 178
Magnesium standard metal solution 1000 ppm 500 mÒ Plastic bottle 1196-3663 SPPLPB23X 178
Magnesium standard metal solution 1000 ppm for ICP-MS solution in HNO3 2% 100 mÒ Plastic bottle 1146-5998 SPCLPB22Y 178
Magnesium standard metal solution 10 000 ppm for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1195-9562 SPPLLI22Y 183
Magnesium standard metal solution 10 000 ppm for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1194-9562 SPPLLI22X 183
Magnesium standard metal solution 1000 ppm for ICP solution in HNO3 5% 500 mÒ Plastic bottle 1192-9562 SPPLLI12X 183
for ICP solution in HNO3 5% 100 mÒ Plastic bottle 1197-9562 SPPLLI23Y 183
Manganese standard metal solution 1000 ppm for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1196-9562 SPPLLI23X 183
for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1193-9562 SPPLLI13X 183
for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1199-9562 SPPLLU22Y 186
for ICP solution in HNO3 5% 500 mÒ Plastic bottle 1198-9562 SPPLLU22X 186
for ICP solution in HNO3 5% 100 mÒ Plastic bottle 1193-9572 SPPLMG22Y 186
for ICP-MS solution in HNO3 2% 250 mÒ Plastic bottle 1192-9572 SPPLMG22T 186
for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1190-9572 SPPLMG12X 186
for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1195-9572 SPPLMG23Y 186
for ICP solution in HCL 2% 500 mÒ Plastic bottle 1194-9572 SPPLMG23X 186
500 mÒ Plastic bottle 1191-9572 SPPLMG13X 187
for ICP solution in HNO3 5% 100 mÒ Plastic bottle 1141-5998 SPCLMG22Y 187
for ICP solution in HNO3 5% 100 mÒ Plastic bottle 1198-9572 SPPLMN22Y 191
for ICP solution in HCL 5% 250 mÒ Plastic bottle 1196-9572 SPPLMN22T 191
500 mÒ Plastic bottle 1197-9572 SPPLMN22X 191
for ICP solution in HNO3 2%
for ICP solution in HNO3 2%
for ICP solution in HNO3 2%
for ICP solution in HNO3 2%
for ICP solution in HCL 2%
for ICP solution in HNO3 5%
for ICP solution in HNO3 5%
for ICP solution in HCL 5%
for ICP-MS solution in HNO3 2%
for ICP solution in HNO3 2%
for ICP solution in HNO3 2%
for ICP solution in HNO3 2%
318
Standard Elemental solution for Trace Metal analysis | S
SPEX Standard mono-element solution for ICP & ICP-MS
designation matrix packsize package type Cat. No Mfr. No page
Manganese standard metal solution 10 000 ppm for ICP solution in HNO3 5% 100 mÒ Plastic bottle 1190-9582 SPPLMN23Y 191
Manganese standard metal solution 1000 ppm for ICP solution in HNO3 5% 500 mÒ Plastic bottle 1199-9572 SPPLMN23X 191
Mercury standard metal solution 1000 ppm for ICP-MS solution in HNO3 2% 100 mÒ Plastic bottle 1142-5998 SPCLMN22Y 191
for ICP solution in HNO3 10% 100 mÒ Plastic bottle 1192-9542 SPPLHG42Y 194
Mercury standard metal solution 10 ppm for ICP solution in HNO3 10% 250 mÒ Plastic bottle 1190-9542 SPPLHG42T 194
Mercury standard metal solution 100 ppm for ICP solution in HNO3 10% 500 mÒ Plastic bottle 1191-9542 SPPLHG42X 194
Mercury standard metal solution 10 000 ppm for ICP solution in HNO3 5% 100 mÒ Plastic bottle 1198-9532 SPPLHG21AY 194
Mercury standard metal solution 10 ppm for ICP solution in HNO3 5% Plastic bottle 1197-9532 SPPLHG21AX 194
Molybdenum standard metal solution 1000 ppm for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1199-9532 SPPLHG21X 194
for ICP solution in HNO3 10% Plastic bottle 1194-9542 SPPLHG43Y 194
Molybdenum standard metal solution 10 000 ppm for ICP solution in HNO3 10% 100 mÒ Plastic bottle 1193-9542 SPPLHG43X 194
Molybdenum standard metal solution 1000 ppm for ICP-MS solution in HNO3 5% 500 mÒ Plastic bottle 1148-5988 SPCLHG21AY 195
Neodymium standard metal solution 1000 ppm for ICP solution in H2O 100 mÒ Plastic bottle 1193-9582 SPPLMO92Y 209
for ICP solution in H2O 100 mÒ Plastic bottle 1191-9582 SPPLMO92T 209
Nickel standard metal solution 1000 ppm for ICP solution in H2O 250 mÒ Plastic bottle 1192-9582 SPPLMO92X 209
for ICP solution in H2O 500 mÒ Plastic bottle 1195-3643 SPPLMO93Y 209
Nickel standard metal solution 10 000 ppm for ICP solution in H2O 100 mÒ Plastic bottle 1194-9582 SPPLMO93X 209
Nickel standard metal solution 1000 ppm for ICP-MS solution in H2O 500 mÒ Plastic bottle 1143-5998 SPCLMO92Y 209
Niobium standard metal solution 1000 ppm for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1197-3653 SPPLND22Y 211
Niobium standard metal solution 10 000 ppm for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1196-3653 SPPLND22X 211
Palladium standard metal solution 1000 ppm for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1190-3663 SPPLNI22Y 212
Phosphorus standard metal solution 1000 ppm for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1198-3653 SPPLNI22T 212
Phosphorus standard metal solution 10 000 ppm for ICP solution in HNO3 2% 250 mÒ Plastic bottle 1199-3653 SPPLNI22X 212
Platinum standard metal solution 1000 ppm for ICP solution in HNO3 5% 500 mÒ Plastic bottle 1192-3663 SPPLNI23Y 212
for ICP solution in HNO3 5% 100 mÒ Plastic bottle 1191-3663 SPPLNI23X 212
Potassium standard metal solution 1000 ppm for ICP-MS solution in HNO3 2% 500 mÒ Plastic bottle 1145-5998 SPCLNI22Y 212
Potassium standard metal solution 1000 ppm for ICP solution in H2O/HF trace 100 mÒ Plastic bottle 1193-3653 SPPLNB92Y 215
Potassium standard metal solution 10 000 ppm for ICP solution in H2O/HF trace 100 mÒ Plastic bottle 1192-3653 SPPLNB92X 215
Potassium standard metal solution 10 000 ppm for ICP solution in H2O/HF trace 500 mÒ Plastic bottle 1195-3653 SPPLNB93Y 215
Potassium standard metal solution 1000 ppm for ICP solution in H2O/HF trace 100 mÒ Plastic bottle 1194-3653 SPPLNB93X 215
Praseodymium standard metal solution 1000 ppm for ICP solution in HCL 10% 500 mÒ Plastic bottle 1199-3663 SPPLPD32Y 223
Rhenium standard metal solution 1000 ppm 100 mÒ Plastic bottle 1198-3663 SPPLPD32X 223
Rhodium standard metal solution 1000 ppm for ICP solution in HCL 10% 500 mÒ Plastic bottle 1149-8789 SPPLP92Y 243
Rhodium standard metal solution 10 ppm 100 mÒ Plastic bottle 1194-3673 SPPLP92T 243
Rubidium standard metal solution 1000 ppm for ICP solution in H2O 250 mÒ Plastic bottle 1196-3673 SPPLP93Y 243
Rubidium standard metal solution 10 000 ppm for ICP solution in H2O 100 mÒ Plastic bottle 1195-3673 SPPLP93X 243
Ruthenium standard metal solution 1000 ppm for ICP solution in H2O 500 mÒ Plastic bottle 1193-3673 SPPLPT32Y 244
for ICP solution in H2O 100 mÒ Plastic bottle 1192-3673 SPPLPT32X 244
for ICP solution in HCL 10% 500 mÒ Plastic bottle 1195-9552 SPPLK22Y 246
100 mÒ Plastic bottle 1193-9552 SPPLK22T 246
for ICP solution in HCL 10% 250 mÒ Plastic bottle 1194-9552 SPPLK22X 246
500 mÒ Plastic bottle 1191-9552 SPPLK12X 246
for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1197-9552 SPPLK23Y 246
for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1196-9552 SPPLK23X 246
for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1192-9552 SPPLK13X 246
for ICP solution in HCL 2% 500 mÒ Plastic bottle 1140-5998 SPCLK22Y 246
100 mÒ Plastic bottle 1191-3673 SPPLPR22Y 264
for ICP solution in HNO3 5% 100 mÒ Plastic bottle 1190-3673 SPPLPR22X 264
for ICP solution in HNO3 5% 500 mÒ Plastic bottle 1192-3683 SPPLRE92Y 269
for ICP solution in HCL 2% 100 mÒ Plastic bottle 1191-3683 SPPLRE92X 269
500 mÒ Plastic bottle 1194-3683 SPPLRH32Y 269
for ICP-MS solution in HNO3 2% 100 mÒ Plastic bottle 1193-3683 SPPLRH32X 269
for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1147-5998 SPCLRH11AY 269
for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1198-3673 SPPLRB22Y 270
for ICP solution in H2O 100 mÒ Plastic bottle 1197-3673 SPPLRB22X 270
for ICP solution in H2O 500 mÒ Plastic bottle 1145-8809 PLRB23Y 270
for ICP solution in HCL 10% 100 mÒ Plastic bottle 1144-8809 PLRB23X 270
500 mÒ Plastic bottle 1196-3683 SPPLRU32Y 270
for ICP solution in HCL 10% 100 mÒ Plastic bottle 1195-3683 SPPLRU32X 270
500 mÒ
for ICP-MS solution in HCl 2% 319
for ICP solution in HNO3 2%
for ICP solution in HNO3 2%
for ICP solution in HNO3 5%
for ICP solution in HNO3 5%
for ICP solution in HCL 10%
for ICP solution in HCL 10%
S | Standard Elemental solution for Trace Metal analysis
SPEX Standard mono-element solution for ICP & ICP-MS
designation matrix packsize package type Cat. No Mfr. No page
Samarium standard metal solution 1000 ppm 100 mÒ Plastic bottle 1190-3713 SPPLSM22Y 271
for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1199-3703 SPPLSM22X 271
Scandium standard metal solution 1000 ppm for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1195-3693 SPPLSC22Y 272
for ICP solution in HNO3 2% 250 mÒ Plastic bottle 1193-3693 SPPLSC22T 272
Scandium standard metal solution 10 000 ppm for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1194-3693 SPPLSC22X 272
Scandium standard metal solution 10 ppm for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1197-3693 SPPLSC23Y 272
Selenium standard metal solution 1000 ppm for ICP solution in HNO3 5% 500 mÒ Plastic bottle 1196-3693 SPPLSC23X 272
for ICP solution in HNO3 5% 100 mÒ Plastic bottle 1149-5998 SPCLSC21AY 272
Selenium standard metal solution 10 000 ppm for ICP-MS solution in HNO3 2% 100 mÒ Plastic bottle 1190-3703 SPPLSE22Y 273
Selenium standard metal solution 1000 ppm for ICP solution in HNO3 2% 250 mÒ Plastic bottle 1198-3693 SPPLSE22T 273
Silicon standard metal solution 1000 ppm for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1199-3693 SPPLSE22X 273
for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1192-3703 SPPLSE23Y 273
Silicon standard metal solution 10 000 ppm for ICP solution in HNO3 5% 500 mÒ Plastic bottle 1191-3703 SPPLSE23X 273
Silicon standard metal solution 10 000 ppm for ICP solution in HNO3 5% 100 mÒ Plastic bottle 1140-6008 SPCLSE22Y 273
Silver standard metal solution 1000 ppm for ICP-MS solution in HNO3 2% 100 mÒ Plastic bottle 1196-3703 SPPLSI92Y 275
for ICP solution in H2O/HF trace 250 mÒ Plastic bottle 1194-3703 SPPLSI92T 275
Silver standard metal solution 10 000 ppm for ICP solution in H2O/HF trace 500 mÒ Plastic bottle 1195-3703 SPPLSI92X 275
Silver standard metal solution 1000 ppm for ICP solution in H2O/HF trace 100 mÒ Plastic bottle 1198-3703 SPPLSI93Y 275
Sodium standard metal solution 1000 ppm for ICP solution in H2O/HF trace 500 mÒ Plastic bottle 1197-3703 SPPLSI93X 275
Sodium standard metal solution 1000 ppm for ICP solution in H2O/HF trace 500 mÒ Plastic bottle 1193-3703 SPPLSI9A3X 276
Sodium standard metal solution 10 000 ppm for ICP solution in H2O 100 mÒ Plastic bottle 1197-9432 SPPLAG22Y 276
Sodium standard metal solution 10 000 ppm for ICP solution in HNO3 2% 250 mÒ Plastic bottle 1195-9432 SPPLAG22T 276
Sodium standard metal solution 1000 ppm for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1196-9432 SPPLAG22X 276
Strontium standard metal solution 1000 ppm for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1199-9432 SPPLAG23Y 276
Strontium standard metal solution 1000 ppm for ICP solution in HNO3 5% 500 mÒ Plastic bottle 1198-9432 SPPLAG23X 276
Strontium standard metal solution 10 000 ppm for ICP solution in HNO3 5% 100 mÒ Plastic bottle 1148-5968 SPCLAG22Y 276
Strontium standard metal solution 10 000 ppm for ICP-MS solution in HNO3 2% 100 mÒ Plastic bottle 1199-3643 SPPLNA22Y 280
Sulfur standard metal solution 1000 ppm for ICP solution in HNO3 2% 250 mÒ Plastic bottle 1198-3643 SPPLNA22T 280
for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1142-8779 SPPLNA22X 280
Sulfur standard metal solution 10 000 ppm for ICP solution in HCL 10% 500 mÒ Plastic bottle 1196-3643 SPPLNA12X 280
Tantalum standard metal solution 1000 ppm 100 mÒ Plastic bottle 1191-3653 SPPLNA23Y 280
Tantalum standard metal solution 10 000 ppm for ICP solution in HCL 2% 500 mÒ Plastic bottle 1190-3653 SPPLNA23X 280
Tellurium standard metal solution 1000 ppm 500 mÒ Plastic bottle 1197-3643 SPPLNA13X 280
Tellurium standard metal solution 1000 ppm for ICP solution in HNO3 5% 100 mÒ Plastic bottle 1144-5998 SPCLNA22Y 280
Tellurium standard metal solution 10 000 ppm for ICP solution in HNO3 5% 100 mÒ Plastic bottle 1191-3723 SPPLSR22Y 332
Terbium standard metal solution 1000 ppm for ICP solution in HCL 5% 250 mÒ Plastic bottle 1199-3713 SPPLSR22T 332
Terbium standard metal solution 10 000 ppm 500 mÒ Plastic bottle 1190-3723 SPPLSR22X 332
Terbium standard metal solution 10 ppm for ICP-MS solution in HNO3 2% 500 mÒ Plastic bottle 1197-3713 SPPLSR12X 332
Thallium standard metal solution 1000 ppm for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1193-3723 SPPLSR23Y 332
for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1192-3723 SPPLSR23X 332
Thallium standard metal solution 10 000 ppm for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1140-8859 PLSR13X 332
Thallium standard metal solution 1000 ppm for ICP solution in HCL 2% 100 mÒ Plastic bottle 1196-3723 SPPLS92Y 336
250 mÒ Plastic bottle 1194-3723 SPPLS92T 336
for ICP solution in HNO3 5% 500 mÒ Plastic bottle 1195-3723 SPPLS92X 336
for ICP solution in HNO3 5% 100 mÒ Plastic bottle 1198-3723 SPPLS93Y 336
for ICP solution in HCL 5% 500 mÒ Plastic bottle 1197-3723 SPPLS93X 336
100 mÒ Plastic bottle 1190-3733 SPPLTA92Y 341
for ICP solution in H2O 500 mÒ Plastic bottle 1199-3723 SPPLTA92X 341
for ICP solution in H2O 100 mÒ Plastic bottle 1192-3733 SPPLTA93Y 341
for ICP solution in H2O 500 mÒ Plastic bottle 1191-3733 SPPLTA93X 341
for ICP solution in H2O 100 mÒ Plastic bottle 1198-3733 SPPLTE22Y 342
for ICP solution in H2O 500 mÒ Plastic bottle 1197-3733 SPPLTE22X 342
for ICP solution in H2O/HF trace 500 mÒ Plastic bottle 1146-8869 PLTE32X 342
for ICP solution in H2O/HF trace 500 mÒ Plastic bottle 1147-8869 PLTE53X 342
for ICP solution in H2O/HF trace 100 mÒ Plastic bottle 1194-3733 SPPLTB22Y 343
for ICP solution in H2O/HF trace 500 mÒ Plastic bottle 1193-3733 SPPLTB22X 343
for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1143-8869 PLTB23Y 343
for ICP solution in HNO3 5% 500 mÒ Plastic bottle 1142-8869 PLTB23X 343
for ICP solution in HCL 10% 100 mÒ Plastic bottle 1142-6008 SPCLTB21AY 343
100 mÒ Plastic bottle 1149-5828 SPPLTL22Y 347
for ICP solution in HCL 40% 250 mÒ Plastic bottle 1199-3743 SPPLTL22T 347
500 mÒ Plastic bottle 1190-3753 SPPLTL22X 347
for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1141-5838 PLTL23Y 347
for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1140-5838 PLTL23X 347
for ICP solution in HNO3 5% 100 mÒ Plastic bottle 1145-6008 SPCLTL22Y 347
for ICP solution in HNO3 5%
for ICP-MS solution in HNO3 2%
for ICP solution in HNO3 2%
for ICP solution in HNO3 2%
for ICP solution in HNO3 2%
for ICP solution in HNO3 5%
for ICP solution in HNO3 5%
for ICP-MS solution in HNO3 2%
320
Standard Elemental solution for Trace Metal analysis | S
SPEX Standard mono-element solution for ICP & ICP-MS
designation matrix packsize package type Cat. No Mfr. No page
Thorium standard metal solution 1000 ppm for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1192-3743 SPPLTH22Y 348
Thorium standard metal solution 1000 ppm for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1191-3743 SPPLTH22X 348
Thullium standard metal solution 1000 ppm for ICP-MS solution in HNO3 2% 100 mÒ Plastic bottle 1143-6008 SPCLTH22Y 348
Tin standard metal solution 1000 ppm for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1194-3753 SPPLTM22Y 348
for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1193-3753 SPPLTM22X 348
Tin standard metal solution 1000 ppm for ICP solution in HNO3 1%/HF 1% 500 mÒ Plastic bottle 1191-3713 SPPLSN22X 350
for ICP solution in HCL 20% 100 mÒ Plastic bottle 1146-8849 SPPLSN52Y 350
Tin standard metal solution 10 000 ppm 250 mÒ Plastic bottle 1193-3713 SPPLSN52T 350
Tin standard metal solution 10 000 ppm for ICP solution in HCL 20% 500 mÒ Plastic bottle 1194-3713 SPPLSN52X 350
Tin standard metal solution 1000 ppm 500 mÒ Plastic bottle 1192-3713 SPPLSN23X 350
Titanium standard metal solution 1000 ppm for ICP solution in HCL 20% 100 mÒ Plastic bottle 1196-3713 SPPLSN53Y 350
500 mÒ Plastic bottle 1195-3713 SPPLSN53X 350
Titanium standard metal solution 1000 ppm for ICP solution in HNO3 2%/HF 2% 100 mÒ Plastic bottle 1141-6008 SPCLSN22Y 350
for ICP solution in HCL 20% 500 mÒ Plastic bottle 1193-3743 SPPLTI52X 352
Titanium standard metal solution 10 000 ppm 100 mÒ Plastic bottle 1197-3743 SPPLTI92Y 352
Titanium standard metal solution 10 000 ppm for ICP solution in HCL 20% 250 mÒ Plastic bottle 1195-3743 SPPLTI92T 352
Titanium standard metal solution 1000 ppm 500 mÒ Plastic bottle 1196-3743 SPPLTI92X 352
Tungsten standard metal solution 1000 ppm for ICP-MS solution in HNO3 1%/HF 1% 500 mÒ Plastic bottle 1194-3743 SPPLTI53X 352
Tungsten standard metal solution 1000 ppm for ICP solution in HCL 20% 100 mÒ Plastic bottle 1198-3743 SPPLTI93Y 352
Tungsten standard metal solution 10 000 ppm 500 mÒ Plastic bottle 1145-5828 SPPLTI93X 352
Tungsten standard metal solution 10 000 ppm for ICP solution in H2O/HF trace 100 mÒ Plastic bottle 1144-6008 SPCLTI92Y 352
for ICP solution in H2O/HF trace 500 mÒ Plastic bottle 1195-3763 SPPLW22X 363
Uranium standard metal solution 1000 ppm for ICP solution in H2O/HF trace 100 mÒ Plastic bottle 1198-3763 SPPLW92Y 363
for ICP solution in HCL 40% 500 mÒ Plastic bottle 1196-3763 SPPLW23X 363
Uranium standard metal solution 10 000 ppm 100 mÒ Plastic bottle 1190-3773 SPPLW93Y 363
Uranium standard metal solution 1000 ppm for ICP solution in H2O/HF trace 500 mÒ Plastic bottle 1199-3763 SPPLW93X 363
Vanadium standard metal solution 1000 ppm for ICP solution in H2O/HF trace 100 mÒ Plastic bottle 1196-3753 SPPLU22Y 365
Vanadium standard metal solution 1000 ppm for ICP-MS solution in H2O/HF trace 500 mÒ Plastic bottle 1195-3753 SPPLU22X 365
Vanadium standard metal solution 10 000 ppm for ICP solution in HNO3 1%/HF 2% 100 mÒ Plastic bottle 1198-3753 SPPLU23Y 365
Vanadium standard metal solution 10 000 ppm for ICP solution in H2O/HF trace 500 mÒ Plastic bottle 1197-3753 SPPLU23X 365
Vanadium standard metal solution 1000 ppm for ICP solution in HNO3 2%/HF 5% 100 mÒ Plastic bottle 1146-6008 SPCLU22Y 365
Water blank in HCl 5% for ICP solution in H2O/HF trace 100 mÒ Plastic bottle 1191-3763 SPPLV22Y 366
Water blank in HNO3 5% for ICP solution in H2O/HF trace 500 mÒ Plastic bottle 1190-3763 SPPLV22X 366
Water blank in HCl 2% for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1199-3753 SPPLV12X 366
Water blank in HNO3 2% for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1194-3763 SPPLV43Y 366
Water Blank for ICP solution in HNO3 5% 500 mÒ Plastic bottle 1193-3763 SPPLV43X 366
for ICP solution in HNO3 5% 500 mÒ Plastic bottle 1192-3763 SPPLV33X 366
Ytterbium standard metal solution 1000 ppm for ICP-MS solution in HNO3 2% 100 mÒ Plastic bottle 1147-6008 SPCLV22Y 366
for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1145-8649 SPPLBLKHCL 369
Ytterbium standard metal solution 1000 ppm for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1146-8649 SPPLBLKHNO3 369
Ytterbium standard metal solution 10 ppm for ICP solution in HCL 2% 100 mÒ Plastic bottle 1148-5978 SPCLBLKHCL 369
Yttrium standard metal solution 10 000 ppm 100 mÒ Plastic bottle 1149-5978 SPCLBLKHNO3 369
for ICP solution in HNO3 15% 100 mÒ Plastic bottle 1147-5978 SPCLBLKH2O 369
Zinc standard metal solution 1000 ppm for ICP solution in HNO3 15% 100 mÒ Plastic bottle 1195-3773 SPPLY22Y 372
Zinc standard metal solution 1000 ppm for ICP solution in HCL 15% 250 mÒ Plastic bottle 1193-3773 SPPLY22T 372
Zinc standard metal solution 10 000 ppm 500 mÒ Plastic bottle 1194-3773 SPPLY22X 372
Zinc standard metal solution 10 000 ppm for ICP-MS solution in HNO3 2% 100 mÒ Plastic bottle 1192-3773 SPPLYB22Y 372
Zinc standard metal solution 1000 ppm for ICP 500 mÒ Plastic bottle 1191-3773 SPPLYB22X 372
100 mÒ Plastic bottle 1148-6008 SPCLY21AY 372
Zirconium standard metal solution 1000 ppm for ICP 100 mÒ Plastic bottle 1197-3773 SPPLY23Y 372
500 mÒ Plastic bottle 1196-3773 SPPLY23X 372
Zirconium standard metal solution 1000 ppm for ICP-MS 100 mÒ Plastic bottle 1191-3783 SPPLZN22Y 373
Zirconium standard metal solution 10 000 ppm 250 mÒ Plastic bottle 1190-3783 SPPLZN22T 373
for ICP-MS 500 mÒ Plastic bottle 1198-3773 SPPLZN12X 373
100 mÒ Plastic bottle 1193-3783 SPPLZN23Y 373
for ICP-MS 500 mÒ Plastic bottle 1192-3783 SPPLZN23X 373
500 mÒ Plastic bottle 1199-3773 SPPLZN13X 373
for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1149-6008 SPCLZN22Y 373
for ICP solution in HNO3 2% 100 mÒ Plastic bottle 1196-3783 SPPLZR22Y 377
for ICP solution in HNO3 2% 250 mÒ Plastic bottle 1194-3783 SPPLZR22T 377
for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1195-3783 SPPLZR22X 377
for ICP solution in HNO3 2% 500 mÒ Plastic bottle 1199-3783 SPPLZR32X 377
for ICP-MS solution in HNO3 2% 100 mÒ Plastic bottle 1198-3783 SPPLZR23Y 377
for ICP solution in HNO3 5% 500 mÒ Plastic bottle 1197-3783 SPPLZR23X 377
for ICP solution in HNO3 5%
for ICP solution in HNO3 2% 321
for ICP solution in HNO3 2%
for ICP solution in HCL 2%
for ICP solution in HNO3 5%
for ICP solution in HNO3 5%
for ICP solution in HCL 5%
for ICP-MS solution in HNO3 2%
for ICP solution in HNO3 2%
for ICP solution in HNO3 2%
for ICP solution in HNO3 2%
for ICP solution in HCL 10%
for ICP solution in HNO3 5%
for ICP solution in HNO3 5%
S | Standard Elemental solution for Trace Metal analysis
SPEX Standard mono-element solution for ICP & ICP-MS
designation matrix packsize package type Cat. No Mfr. No page
Zirconium standard metal solution 10 000 ppm for ICP solution in HCL 10% 500 mÒ Plastic bottle 1190-3793 SPPLZR33X 377
SPEX Standard Instrument check, Calibration & Multi-element solution for ICP & ICP-MS
NIST Certified packsize package type Cat. No Mfr. No page
100 mÒ Plastic bottle 1192-1666 SPCLCAL1 327
designation 100 mÒ Plastic bottle 1193-1666 SPCLCAL2 327
Standard Instrument Calibration 1 100 mÒ Plastic bottle SPCLCAL3 SPCLCAL3 327
Standard Instrument Calibration 2 100 mÒ Plastic bottle 1198-1626 SPCALMIX3100 327
Standard Instrument Calibration 3 500 mÒ Plastic bottle 1197-1626 SPCALMIX10500 327
Standard Instrument check 3 500 mÒ Plastic bottle 1199-1626 SPCALMIX3500 327
Standard Instrument check 10 100 mÒ Plastic bottle 1190-1636 SPCALMIX4100 327
Standard Instrument check 3 500 mÒ Plastic bottle 1191-1636 SPCALMIX4500 327
Standard Instrument check 4 100 mÒ Plastic bottle 1192-1636 SPCALMIX7100 327
Standard Instrument check 4 500 mÒ Plastic bottle 1193-1636 SPCALMIX7500 327
Standard Instrument check 7 100 mÒ Plastic bottle 1194-1636 SPCALMIX8100 327
Standard Instrument check 7 500 mÒ Plastic bottle 1195-1636 SPCALMIX8500 327
Standard Instrument check 8 100 mÒ Plastic bottle 1196-1626 SPCALMIX10100 328
Standard Instrument check 8 100 mÒ Plastic bottle 1195-1666 SPCLMS1 328
Standard Instrument check 10 100 mÒ Plastic bottle 1193-1676 SPCLMSSETN 328
Standard 1 solution Multi-element 100 mÒ Plastic bottle 1196-1666 SPCLMS2 328
Standard Set of 7 Multi-element solution (no Hg) 100 mÒ Plastic bottle 1197-1666 SPCLMS2A 328
Standard 2 solution Multi-element 100 mÒ Plastic bottle 1196-5557 SPCLMS2AN 328
Standard 2A solution Multi-element 100 mÒ Plastic bottle 1198-1666 SPCLMS2N 328
Standard 2A solution Multi-element (no Hg) 100 mÒ Plastic bottle 1199-1666 SPCLMS3 328
Standard 2 solution Multi-element (no Hg) 100 mÒ Plastic bottle 1190-1676 SPCLMS4 328
Standard 3 solution Multi-element 100 mÒ Plastic bottle 1191-1676 SPCLMS5 328
Standard 4 solution Multi-element 100 mÒ Plastic bottle 1192-1676 SPCLMSSET 328
Standard 5 solution Multi-element 100 mÒ Plastic bottle 1196-1636 SPMIXSTD1100 328
Standard Set of 7 Multi-element solution 500 mÒ Plastic bottle 1195-1646 SPMIXSTD3500 329
Standard 1 Mixed Multi-element calibration 100 mÒ Plastic bottle 1196-1646 SPMIXSTD3A100 329
Standard 3 Mixed Multi-element calibration 500 mÒ Plastic bottle 1197-1646 SPMIXSTD3A500 329
Standard 3A Mixed Multi-element calibration 100 mÒ Plastic bottle 1198-1646 SPMIXSTD4100 329
Standard 3A Mixed Multi-element calibration 500 mÒ Plastic bottle 1199-1646 SPMIXSTD4500 329
Standard 4 Mixed Multi-element calibration 100 mÒ Plastic bottle 1190-1656 SPMIXSTD4A100 329
Standard 4 Mixed Multi-element calibration 500 mÒ Plastic bottle 1191-1656 SPMIXSTD4A500 329
Standard 4A Mixed Multi-element calibration 100 mÒ Plastic bottle 1192-1656 SPMIXSTD5100 329
Standard 4A Mixed Multi-element calibration 500 mÒ Plastic bottle 1193-1656 SPMIXSTD5500 329
Standard 5 Mixed Multi-element calibration 100 mÒ Plastic bottle 1194-1656 SPMIXSTD5A100 329
Standard 5 Mixed Multi-element calibration 500 mÒ Plastic bottle 1197-1636 SPMIXSTD1500 329
Standard 5A Mixed Multi-element calibration 500 mÒ Plastic bottle 1195-1656 SPMIXSTD5A500 329
Standard 1 Mixed Multi-element calibration 100 mÒ Plastic bottle 1198-1636 SPMIXSTD1A100 330
Standard 5A Mixed Multi-element calibration 500 mÒ Plastic bottle 1199-1636 SPMIXSTD1A500 330
Standard 1A Mixed Multi-element calibration 100 mÒ Plastic bottle 1190-1646 SPMIXSTD2100 330
Standard 1A Mixed Multi-element calibration 500 mÒ Plastic bottle 1191-1646 SPMIXSTD2500 330
Standard 2 Mixed Multi-element calibration 100 mÒ Plastic bottle 1192-1646 SPMIXSTD2A100 330
Standard 2 Mixed Multi-element calibration 500 mÒ Plastic bottle 1193-1646 SPMIXSTD2A500 330
Standard 2A Mixed Multi-element calibration 100 mÒ Plastic bottle 1194-1646 SPMIXSTD3100 330
Standard 2A Mixed Multi-element calibration 100 mÒ Plastic bottle 1199-6706 SPICPKIT1 330
Standard 3 Mixed Multi-element calibration 100 mÒ Plastic bottle 1193-1626 SPICPKIT2 330
Standard Plasma emission Kit 1 (38 elements) 100 mÒ Plastic bottle 1194-1626 SPICPKIT3 330
Standard Plasma emission Kit 2 (13 elements) 100 mÒ Plastic bottle 1195-1626 SPICPKIT4 330
Standard Plasma emission Kit 3 (10 elements) 100 mÒ Plastic bottle 1266-9585 SPCLTUNE1 330
Standard Plasma emission Kit 3 (15 elements)
Standard Tuning solution 1
322
Standard volumetric solution | S
Standard solutions Ready to use for volumetric analysis
designation comment NIST tolerance packsize package type Cat. No Mfr. No page
. ± 0.005 1Ò Glass bottle 1006-0180 J/1101/15
Ammonium iron (II) sulfate solution 43
0.1M (0.1N) . ± 0.005 2.5 Ò HDPE Plastic bottle 1037-5732 J/1101/PB17
43
Ammonium iron(II) sulfate solution Eur.Ph. , USP, BP ± 0.005 2.5 Ò Glass bottle 1074-3991 J/1100/17
0.025M 43
Eur.Ph. , USP, BP . ± 0.002 1Ò HDPE Plastic bottle 1063-9672 J/1500/PB15
Ammonium thiocyanate solution 0.1M Eur.Ph. , BP 46
(0.1N) Eur.Ph. , BP . ± 0.002 2.5 Ò HDPE Plastic bottle 1025-4290 J/1500/PB17
. ± 0.002 1Ò 46
Cerium(IV) sulfate solution 0.1M (0.1N) . ± 0.002 2.5 Ò Glass bottle 1024-4340 J/3000/15
. ± 0.003 1Ò Glass bottle 1063-5302 J/3000/17 81
Ethylenediaminetetraacetic acid diso- 81
dium salt solution 0.2N . ± 0.003 2.5 Ò HDPE Plastic bottle 1001-0190 J/3720/PB15
127
Ethylenediaminetetraacetic acid diso- Eur.Ph. , BP . ± 0.001 1Ò HDPE Plastic bottle 1076-4181 J/3720/17
dium salt solution 0.2N Eur.Ph. , BP 127
Eur.Ph. , BP . ± 0.001 2.5 Ò HDPE Plastic bottle 1055-8230 J/3700/15
Hydrochloric acid solution 0.2M (0.2N) 127
Eur.Ph. , BP . ± 0.001 10 Ò HDPE Plastic bottle 1056-8230 J/3700/17
Hydrochloric acid solution 0.1M (0.1N) Eur.Ph. , BP 127
Eur.Ph. , BP . ± 0.001 1Ò Bag in box 1000-0190 J/3700/24
Hydrochloric acid solution 0.5M (0.5N) Eur.Ph. , BP . ± 0.001 2.5 Ò 127
. ± 0.001 1Ò HDPE Plastic bottle 1052-2533 J/4340/15
Hydrochloric acid solution 0.02M Eur.Ph. , USP, BP . ± 0.001 2.5 Ò HDPE Plastic bottle 1067-4722 J/4340/17 150
(0.02N) Eur.Ph. , USP, BP . ± 0.001 5Ò HDPE Plastic bottle 1032-5710 J/4350/15 150
Eur.Ph. , USP, BP . ± 0.001 10 Ò HDPE Plastic bottle 1041-9560 J/4350/17 150
Hydrochloric acid solution 1M (1N) Eur.Ph. , USP, BP . ± 0.001 1Ò HDPE Plastic bottle 1051-0921 J/4350/21 150
. ± 0.001 2.5 Ò Bag in box 1043-9560 J/4350/24 150
Hydrochloric acid solution 5M (5N) Eur.Ph. , BP . ± 0.001 25 Ò HDPE Plastic bottle 1064-6262 J/4330/15 150
Hydrochloric acid solution 2M (2N) Eur.Ph. , BP HDPE Plastic bottle 1008-0210 J/4330/17 150
Iodine solution 0.05M (0.1N) Eur.Ph. , USP, BP . ± 0.003 1Ò HDPE Plastic container 1024-7233 J/4330/25 150
Iodine solution 0.5M (1N) Eur.Ph. , USP, BP 150
Nitric acid solution 2M (2N) Eur.Ph. , BP . ± 0.003 2.5 Ò HDPE Plastic bottle 1073-3991 J/4360/PB15
Nitric acid solution 1M (1N) Eur.Ph. , BP 151
Eur.Ph. , BP . ± 0.001 1Ò HDPE Plastic bottle 1053-8040 J/4360/17
Nitric acid solution 0.1M (0.1N) . ± 0.001 2.5 Ò 151
Perchloric acid solution 0.1M (0.1N) Eur.Ph. , USP, BP . ± 0.001 5Ò HDPE Plastic bottle 1046-7640 J/4320/15
Potassium bromate-bromide solution Eur.Ph. , USP, BP . ± 0.001 10 Ò HDPE Plastic bottle 1048-7830 J/4320/17 151
0.0167 M (0.1N) Eur.Ph. , USP, BP 1Ò HDPE Plastic bottle 1048-8020 J/4320/21 151
± 0.005 2.5 Ò Bag in box 1028-4480 J/4320/24 151
± 0.005 1Ò HDPE Plastic bottle 1060-5882 J/4310/15 151
. ± 0.001 2.5 Ò HDPE Plastic bottle 1061-5882 J/4310/17 151
. ± 0.001 1Ò HDPE Plastic bottle 1021-4440 J/4315/15 151
. ± 0.001 2.5 Ò HDPE Plastic bottle 1002-0210 J/4315/17 151
. ± 0.001 500 mÒ Glass bottle 1062-5112 J/4410/15 151
. ± 0.002 1Ò Glass bottle 1037-5800 J/4410/17 161
. ± 0.002 2.5 Ò Coated Glass bottle 1044-9750 J/4400/PB08 161
. ± 0.002 2.5 Ò Coated Glass bottle 1029-4240 J/4400/PB15 161
. ± 0.005 1Ò Coated Glass bottle 1036-5800 J/4400/PB17 161
. ± 0.001 2.5 Ò HDPE Plastic bottle 1022-4010 J/5545/PB17 161
. ± 0.001 10 Ò HDPE Plastic bottle 1045-9560 J/5550/PB15 218
. ± 0.001 1Ò HDPE Plastic bottle 1001-0230 J/5550/PB17 218
. ± 0.001 2.5 Ò Bag in box 1077-2924 J/5550/24 218
. ± 0.001 10 Ò HDPE Plastic bottle 1075-6101 J/5600/PB15 218
. ± 0.001 1Ò HDPE Plastic bottle 1032-6380 J/5600/17 218
. ± 0.002 2.5 Ò Bag in box 1146-8962 J/5600/24 218
. ± 0.002 HDPE Plastic bottle 1046-9750 J/5820/PB15 218
1Ò HDPE Plastic bottle 1005-0230 J/5820/PB17 229
. ± 0.001 229
2.5 Ò Glass bottle 1047-9750 J/6100/15
. ± 0.001 247
Glass bottle 1061-4732 J/6100/17
Potassium dichromate solution Eur.Ph. , USP, BP . ± 0.001 1Ò 247
0.0167M (0.1N) Eur.Ph. , USP, BP . ± 0.001 2.5 Ò Glass bottle 1070-4761 J/6212/15
Eur.Ph. , BP . ± 0.005 1Ò 251
Potassium hydroxide solution 0.1M Glass bottle 1071-4761 J/6212/17
(0.1N), (in methanol) 251
HDPE Plastic bottle 1036-6112 J/6625/15
256
323
S | Standard volumetric solution
Standard solutions Ready to use for volumetric analysis
designation comment NIST tolerance packsize package type Cat. No Mfr. No page
. ± 0.002 1Ò HDPE Plastic bottle 1011-1720 J/6620/15 256
Potassium hydroxide solution 0.1M
(0.1N), (in ethanol) . ± 0.002 2.5 Ò HDPE Plastic bottle 1068-6642 J/6620/17 256
Potassium hydroxide solution 0.5M . ± 0.002 1Ò HDPE Plastic bottle 1074-4951 J/6612/15 257
(0.5N), (in ethanol) . ± 0.002 2.5 Ò
. ± 0.001 1Ò HDPE Plastic bottle 1067-6642 J/6612/17 257
Potassium hydroxide solution 1M (1N) Eur.Ph. , BP . ± 0.001 2.5 Ò HDPE Plastic bottle 1061-7032 J/6630/PB15 257
Eur.Ph. , BP . ± 0.001 1Ò HDPE Plastic bottle 1002-0200 J/6630/17 257
. ± 0.001 2.5 Ò HDPE Plastic bottle 1008-0190 J/6610/15 257
Potassium hydroxide solution 1M (1N),
(alcoholic) . ± 0.001 2.5 Ò HDPE Plastic bottle 1042-8220 J/6610/17 257
Potassium iodate 0.025M solution sta- Eur.Ph. , USP, BP . ± 0.001 1Ò Glass bottle 1025-4580 J/6700/17 258
bilised with 10 ppm mercury(II) chloride Eur.Ph. , USP, BP . ± 0.001 2.5 Ò
Glass bottle 1019-1760 J/6690/15 258
Potassium iodate 0.05M solution stabi-
lised with 10 ppm mercury(II) chloride Glass bottle 1060-6842 J/6690/17 258
Potassium permanganate solution . ± 0.001 1Ò Glass bottle 1070-5721 J/6900/15 261
0.02M (0.1N) . ± 0.001 2.5 Ò
Coated Glass bottle 1032-6190 J/6900/PB17 261
Potassium thiocyanate solution 0.1M Eur.Ph. , USP, BP . ± 0.002 1Ò
(0.1N) Eur.Ph. , USP, BP Glass bottle 1029-4670 J/7050/15 264
Silver nitrate solution 1M (1N) Eur.Ph. , USP, BP . ± 0.002 2.5 Ò
Eur.Ph. , USP, BP HDPE Plastic bottle 1064-7222 J/7050/PB17 264
Silver nitrate solution 0.1M (0.1N) ± 0.001 1Ò HDPE Plastic bottle 1072-5911 J/7320/PB15 277
± 0.001 2.5 Ò HDPE Plastic bottle 1005-0220 J/7320/PB17 277
Silver nitrate solution 0.05M (0.05N) . ± 0.001 1Ò HDPE Plastic bottle 1006-0220 J/7330/15 277
. ± 0.001 2.5 Ò HDPE Plastic bottle 1011-1910 J/7330/17 277
Silver nitrate solution 0.0282M . ± 0.001 10 Ò Bag in box 1064-0423 J/7330/24 277
(0.0282N) . ± 0.001 25 Ò HDPE Drum 1143-8553 J/7330/25 277
. ± 0.002 1Ò HDPE Plastic bottle 1074-6101 J/7340/15 278
Silver nitrate solution 0.02M (0.02N) . ± 0.002 2.5 Ò HDPE Plastic bottle 1043-9370 J/7340/17 278
Sodium arsenite solution 0.05M (0.1N) Glass bottle 1012-4713 J/7370/07 278
Sodium carbonate solution 0.05M . ± 0.003 250 mÒ
(0.1N) HDPE Plastic bottle 1054-8430 J/7370/15 278
Sodium carbonate solution 0.5M (1N) . ± 0.003 1Ò
HDPE Plastic bottle 1044-9560 J/7370/17 278
. ± 0.003 2.5 Ò HDPE Plastic bottle 1044-9370 J/7350/15 278
HDPE Plastic bottle 1019-1950 J/7350/17 278
. ± 0.003 1Ò HDPE Plastic bottle 1031-6430 J/7510/PB15 282
. ± 0.003 2.5 Ò HDPE Plastic bottle 1017-2000 J/7510/PB17 282
. ± 0.002 1Ò HDPE Plastic bottle 1077-6291 J/7580/PB15 284
. ± 0.002 2.5 Ò
HDPE Plastic bottle 1040-8030 J/7580/17 284
. ± 0.001 1Ò HDPE Plastic bottle 1048-9750 J/7520/PB15 285
HDPE Plastic bottle 1049-6870 J/7520/17 285
. ± 0.001 2.5 Ò HDPE Plastic bottle 1048-8790 J/7800/15 296
. ± 0.001 1Ò HDPE Plastic bottle 1004-0220 J/7800/17 296
. ± 0.001 2.5 Ò
HDPE Plastic bottle 1030-6240 J/7800/21 296
± 0.005 1Ò
Bag in box 1071-5721 J/7800/24 296
Sodium hydroxide solution 10M (10N) ± 0.005 2.5 Ò
ca. 40w/v ± 0.005 5Ò HDPE Plastic container 1049-8980 J/7800/25 296
± 0.005 10 Ò HDPE Plastic bottle 1007-0190 J/7610/PB15 296
HDPE Plastic bottle 1012-1670 J/7610/17 296
Sodium hydroxide solution 2M (2N) BP ± 0.005 25 Ò HDPE Plastic bottle 1073-4951 J/7610/21 296
Sodium hydroxide solution 1M (1N) BP HDPE Plastic bottle 1052-8240 J/7620/15 296
BP . ± 0.001 1Ò HDPE Plastic bottle 1074-5141 J/7620/17 296
Eur.Ph. , USP, BP . ± 0.001 2.5 Ò HDPE Plastic bottle 1075-5141 J/7620/21 296
Eur.Ph. , USP, BP . ± 0.001 5Ò Bag in box 1066-6452 J/7620/24 296
Eur.Ph. , USP, BP . ± 0.001 1Ò
Eur.Ph. , USP, BP . ± 0.001 2.5 Ò
. ± 0.001 5Ò
. ± 0.001 10 Ò
324
Standard volumetric solution | S
Standard solutions Ready to use for volumetric analysis
designation comment NIST tolerance packsize package type Cat. No Mfr. No page
Sodium hydroxide solution methanolic J/7625/PB15 296
1M (1N) Eur.Ph. , BP . ± 0.002 1Ò HDPE Plastic bottle 1076-5141
Eur.Ph. , BP J/7625/17 296
Sodium hydroxide solution 0.5M (0.5N) Eur.Ph. , BP . ± 0.002 2.5 Ò HDPE Plastic bottle 1069-6832 296
Eur.Ph. , BP J/7630/15 296
Sodium hydroxide solution 0.2M (0.2N) Eur.Ph. , USP, BP . ± 0.001 1Ò HDPE Plastic bottle 1043-6602 J/7630/17 296
. ± 0.001 2.5 Ò HDPE Plastic bottle 1050-8430 J/7630/21 296
Sodium hydroxide solution 0.1M (0.1N) . ± 0.001 5Ò HDPE Plastic bottle 1043-8410 J/7630/24 296
Sodium hydroxide solution (0.01M) . ± 0.001 10 Ò Bag in box 1015-1810 J/7630/27 297
0.01N . ± 0.001 200 Ò HDPE Plastic container 1193-8772 J/7640/15 297
Sodium nitrite solution 0.5M (0.5N) . ± 0.001 1Ò HDPE Plastic bottle 1031-6190 J/7640/17 297
. ± 0.001 2.5 Ò HDPE Plastic bottle 1004-0200 J/7640/21 297
. ± 0.001 5Ò HDPE Plastic bottle 1062-7032 J/7640/24 297
. ± 0.001 10 Ò Bag in box 1013-1860 J/7660/15 297
. ± 0.001 1Ò HDPE Plastic bottle 1014-1860 J/7660/17 297
. ± 0.001 2.5 Ò HDPE Plastic bottle 1055-8050 J/7660/21 297
. ± 0.001 5Ò HDPE Plastic bottle 1063-7032 J/7660/24 297
. ± 0.001 10 Ò Bag in box 1022-4630 300
J/9010/17 306
. ± 0.001 2.5 Ò HDPE Plastic bottle 1266-6727
J/7900/15 306
. ± 0.003 1Ò Glass bottle 1015-1860
J/7950/15 306
. ± 0.001 1Ò HDPE Plastic bottle 1042-9180
J/7950/17 306
Sodium thiosulfate solution 0.1M Eur.Ph. , USP, BP . ± 0.001 2.5 Ò HDPE Plastic bottle 1024-3960
(0.1N) Eur.Ph. , USP, BP . ± 0.001 5Ò J/7950/21 306
HDPE Plastic bottle 1075-3694 339
Sodium thiosulfate solution 0.01M Eur.Ph. , USP, BP . ± 0.001 10 Ò J/7950/24 339
(0.01N) Eur.Ph, BP Bag in box 1012-1910 339
Sulfuric acid solution 1M (2N) . ± 0.001 2.5 Ò J/9011/17 339
Eur.Ph. , USP, BP HDPE Plastic bottle 1267-6727 339
Sulfuric acid solution 0.5M (1N) Eur.Ph. , USP, BP . ± 0.001 1Ò J/8420/PB15 339
Sulfuric acid solution 0.25M (0.5N) Eur.Ph. , USP, BP . ± 0.001 2.5 Ò HDPE Plastic bottle 1009-0250 J/8420/17 339
Sulfuric acid solution 0.1M (0.2N) Eur.Ph. , USP, BP . ± 0.001 10 Ò HDPE Plastic bottle 1066-6072 J/8420/24 339
. ± 0.001 25 Ò Bag in box 1149-8962 J/8420/25 339
Sulfuric acid solution 0.05M (0.1N) Eur.Ph. , BP . ± 0.001 1Ò HDPE Drum 1267-8635 J/8430/15 339
Eur.Ph. , BP . ± 0.001 2.5 Ò HDPE Plastic bottle 1073-4761 J/8430/17 339
Sulfuric acid solution 0.01M (0.2N) Eur.Ph. , BP . ± 0.001 10 Ò HDPE Plastic bottle 1041-8030 J/8430/24 339
Eur.Ph. , BP . ± 0.001 25 Ò Bag in box 1052-9000 J/8430/25 339
. ± 0.001 1Ò HDPE Drum 1268-8635 J/8440/PB15 339
. ± 0.001 2.5 Ò HDPE Plastic bottle 1071-3611 J/8440/17 340
. ± 0.001 1Ò HDPE Plastic bottle 1051-8810 J/8450/15 340
. ± 0.001 2.5 Ò HDPE Plastic bottle 1072-3611 J/8450/17 340
. ± 0.001 10 Ò HDPE Plastic bottle 1019-2000 J/8450/24 340
. ± 0.001 25 Ò Bag in box 1027-4100 J/8450/25 340
. ± 0.001 1Ò HDPE Drum 1264-6727 J/8460/15 340
. ± 0.001 2.5 Ò HDPE Plastic bottle 1035-5710 J/8460/17 340
. ± 0.001 10 Ò HDPE Plastic bottle 1015-2050 J/8460/24
. ± 0.001 25 Ò Bag in box 1024-4150 J/8460/25 344
. ± 0.003 1Ò HDPE Drum 1265-6727 J/8470/PB15
. ± 0.003 2.5 Ò HDPE Plastic bottle 1025-4150 J/8470/17 344
. ± 0.003 10 Ò HDPE Plastic bottle 1053-8620 J/8470/24
Bag in box 1063-4922 344
± 0.05 500 mÒ J/8750/08
Glass bottle 1058-8050 344
J/8750/15
Tetra-n-butyl ammonium hydroxide so- ± 0.05 1Ò Glass bottle 1030-5810 353
lution 0.1 M (0.1N) in toluene/metha- ± 0.05 2.5 Ò J/8750/17
nol Glass bottle 1015-2100 325
J/8750/24
Titanium(III) chloride solution 0.2M ± 0.05 10 Ò Bag in box 1140-8972
(0.2N) ± 0.1 2.5 Ò Glass bottle 1064-5112 J/8780/17
S | Standard volumetric solution
Standard solutions concentrated for volumetric analysis
designation each ampoule ma- packsize Cat. No Mfr. No page
kes 1 1059-2333 J/0551C/05 15
6 1060-4922 J/0551C/90 15
Acetic acid solution 0.1M (0.1N) 1Ò 1 1049-7142 J/1500C/05 46
6 1026-4290 J/1500C/90 46
Ammonium thiocyanate solution 0.1M (0.1N) 1Ò 6 1033-5900 J/3010C/90 81
Cerium(IV) sulfate solution 0.05M (0.05N) 1Ò 1 1005-9981 J/3720C/05 127
Ethylenediaminetetraacetic acid disodium salt solution 0.01M (0.02N) 6 1049-7060 J/3720C/90 127
1 1031-7751 J/3700C/05 127
Ethylenediaminetetraacetic acid trisodium salt solution 0.1M (0.2N) 500 mÒ 6 1012-1430 J/3700C/90 127
1 1052-8040 J/4350C/05 150
Hydrochloric acid solution 0.1M (0.1N) 1Ò 6 1030-5760 J/4350C/90 150
1 1059-0721 J/4330C/05 151
Hydrochloric acid solution 0.5M (0.5N) 1Ò 6 1031-5710 J/4330C/90 151
1 1038-6040 J/4320C/05 151
Hydrochloric acid solution 1M (1N) 1Ò 6 1052-8050 J/4320C/90 151
1 1012-2352 J/5550C/05 218
Nitric acid solution 1M (1N) 1Ò 6 1009-0220 J/5550C/90 218
1 1052-2572 J/5650C/05 223
Oxalic acid solution 0.05M (0.1N) 1Ò 6 1011-1960 J/5650C/90 223
1 1047-7492 J/6100C/05 247
Potassium bromate-bromide solution 0.0167 M (0.1N) 1Ò 6 1065-6262 J/6100C/90 247
1 1053-2533 J/6212C/05 252
Potassium dichromate solution 0.0167M (0.1N) 1Ò 6 1040-8220 J/6212C/90 252
1 1018-3711 J/6640C/05 257
Potassium hydroxide solution 0.1M (0.1N) 1Ò 6 1059-8420 J/6640C/90 257
1 1073-6292 J/6630C/05 257
Potassium hydroxide solution 1M (1N) 1Ò 6 1034-6140 J/6630C/90 257
1 1074-5911 J/7330C/05 278
Silver nitrate solution 0.1M (0.1N) 1Ò 6 1036-6330 J/7330C/90 278
Sodium acetate solution 0.1M 1Ò 1 1140-2914 J/7440C/05 281
Sodium carbonate solution 0.05M (0.1N) 1Ò 1 1044-6312 J/7580C/05 285
6 1053-8050 J/7580C/90 285
Sodium chloride solution 0.1M (0.1N) 1Ò 1 1040-7152 J/7590C/05 286
6 1050-8240 J/7590C/90 286
Sodium hydroxide solution 1M (1N) 1Ò 1 1032-6140 J/7620C/05 296
6 1069-6642 J/7620C/90 296
Sodium hydroxide solution 0.5M (0.5N) 1Ò 1 1030-6190 J/7630C/05 296
6 1003-0200 J/7630C/90 296
Sodium hydroxide solution 0.1M (0.1N) 1Ò 1 1046-8790 J/7660C/05 297
6 1007-0200 J/7660C/90 297
Sodium thiosulfate solution 0.1M (0.1N) 1Ò 1 1055-8240 J/7950C/05 306
6 1067-7412 J/7950C/90 306
Sodium thiosulfate solution 0.5M (0.5N) 500 mÒ 1 1019-2392 J/7951C/05 306
6 1007-0220 J/7951C/90 306
Sulfuric acid solution 0.05M (0.1N) 1Ò 1 1032-5760 J/8460C/05 340
6 1052-8620 J/8460C/90 340
Sulfuric acid solution 0.5M (1N) 1Ò 1 1019-1570 J/8430C/05 340
6 1042-8030 J/8430C/90 340
Zinc sulfate solution 0.05M (0.05N) 1Ò 1 1043-6912 J/8490C/05 377
6 1000-0240 J/8490C/90 377
326
Standard Instrument check 8 | S
Standard Instrument Calibration 1 Standard Instrument check 4
for ICP-MS, NIST certified for ICP, NIST certified
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
100 mÒ Plastic bottle 1192-1666 SPCLCAL1 100 mÒ Plastic bottle 1190-1636 SPCALMIX4100
H314
H315, H320
see the complete information (Application, Content & Matrix) in the Standard solu- see the complete information (Application, Content & Matrix) in the Standard solu-
tion section page 322 tion section page 322
Check with your local distributor for availability of Spex product Check with your local distributor for availability of Spex product
Standard Instrument Calibration 2 Standard Instrument check 4
for ICP-MS, NIST certified for ICP, NIST certified
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
100 mÒ Plastic bottle 1193-1666 SPCLCAL2 500 mÒ Plastic bottle 1191-1636 SPCALMIX4500
H314
H315, H320
see the complete information (Application, Content & Matrix) in the Standard solu- see the complete information (Application, Content & Matrix) in the Standard solu-
tion section page 322 tion section page 322
Check with your local distributor for availability of Spex product Check with your local distributor for availability of Spex product
Standard Instrument Calibration 3 Standard Instrument check 7 Cat. No Mfr. No
1192-1636 SPCALMIX7100
for ICP-MS, NIST certified for ICP, NIST certified
packaging Mfr. No packaging
100 mÒ Plastic bottle SPCLCAL3 100 mÒ Plastic bottle
H314
H315, H319
see the complete information (Application, Content & Matrix) in the Standard solu- see the complete information (Application, Content & Matrix) in the Standard solu-
tion section page 322 tion section page 322
Check with your local distributor for availability of Spex product Check with your local distributor for availability of Spex product
Standard Instrument check 3 Cat. No Standard Instrument check 7 Cat. No Mfr. No
1198-1626 1193-1636 SPCALMIX7500
for ICP, NIST certified for ICP, NIST certified
packaging Mfr. No packaging
100 mÒ Plastic bottle SPCALMIX3100 500 mÒ Plastic bottle
H314, H318
H315, H319
see the complete information (Application, Content & Matrix) in the Standard solu- see the complete information (Application, Content & Matrix) in the Standard solu-
tion section page 322 tion section page 322
Check with your local distributor for availability of Spex product Check with your local distributor for availability of Spex product
Standard Instrument check 10 Cat. No Standard Instrument check 8 Cat. No Mfr. No
1197-1626 1194-1636 SPCALMIX8100
for ICP, NIST certified for ICP, NIST certified
packaging Mfr. No packaging
500 mÒ Plastic bottle SPCALMIX10500 100 mÒ Plastic bottle
H315, H319
H315, H320
see the complete information (Application, Content & Matrix) in the Standard solu- see the complete information (Application, Content & Matrix) in the Standard solu-
tion section page 322 tion section page 322
Check with your local distributor for availability of Spex product Check with your local distributor for availability of Spex product
Standard Instrument check 3 Cat. No Standard Instrument check 8 Cat. No Mfr. No
1199-1626 1195-1636 SPCALMIX8500
for ICP, NIST certified for ICP, NIST certified
packaging Mfr. No packaging
500 mÒ Plastic bottle SPCALMIX3500 500 mÒ Plastic bottle
H314, H318
H315, H320
see the complete information (Application, Content & Matrix) in the Standard solu- see the complete information (Application, Content & Matrix) in the Standard solu-
tion section page 322 tion section page 322
Check with your local distributor for availability of Spex product Check with your local distributor for availability of Spex product
327
S | Standard Instrument check 10
Standard Instrument check 10 Standard 2 solution Multi-element (no Hg)
for ICP, NIST certified for ICP-MS, NIST certified
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
100 mÒ Plastic bottle 1196-1626 SPCALMIX10100 100 mÒ Plastic bottle 1198-1666 SPCLMS2N
H315, H319
H314
see the complete information (Application, Content & Matrix) in the Standard solu- see the complete information (Application, Content & Matrix) in the Standard solu-
tion section page 322 tion section page 322
Check with your local distributor for availability of Spex product Check with your local distributor for availability of Spex product
Standard 1 solution Multi-element Standard 3 solution Multi-element
for ICP-MS, NIST certified for ICP-MS, NIST certified
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
100 mÒ Plastic bottle 1195-1666 SPCLMS1 100 mÒ Plastic bottle 1199-1666 SPCLMS3
H314
H315, H319, H335
see the complete information (Application, Content & Matrix) in the Standard solu- see the complete information (Application, Content & Matrix) in the Standard solu-
tion section page 322 tion section page 322
Check with your local distributor for availability of Spex product Check with your local distributor for availability of Spex product
Standard Set of 7 Multi-element solution (no Hg) Standard 4 solution Multi-element
for ICP-MS, NIST certified for ICP-MS, NIST certified
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
100 mÒ Plastic bottle 1190-1676 SPCLMS4
100 mÒ Plastic bottle 1193-1676 SPCLMSSETN H319
see the complete information (Application, Content & Matrix) in the Standard solu-
tion section page 322
Check with your local distributor for availability of Spex product
see the complete information (Application, Content & Matrix) in the Standard solu-
tion section page 322
Check with your local distributor for availability of Spex product
Standard 2 solution Multi-element
for ICP-MS, NIST certified
packaging Cat. No Mfr. No Standard 5 solution Multi-element
100 mÒ Plastic bottle 1196-1666 SPCLMS2
H314 for ICP-MS, NIST certified
packaging Cat. No Mfr. No
100 mÒ Plastic bottle 1191-1676 SPCLMS5
H315, H320
see the complete information (Application, Content & Matrix) in the Standard solu-
tion section page 322
Check with your local distributor for availability of Spex product
see the complete information (Application, Content & Matrix) in the Standard solu-
tion section page 322
Check with your local distributor for availability of Spex product
Standard 2A solution Multi-element
for ICP-MS, NIST certified
packaging Cat. No Mfr. No Standard Set of 7 Multi-element solution
100 mÒ Plastic bottle 1197-1666 SPCLMS2A
H314 for ICP-MS, NIST certified
packaging Cat. No Mfr. No
100 mÒ Plastic bottle 1192-1676 SPCLMSSET
see the complete information (Application, Content & Matrix) in the Standard solu- see the complete information (Application, Content & Matrix) in the Standard solu-
tion section page 322 tion section page 322
Check with your local distributor for availability of Spex product Check with your local distributor for availability of Spex product
Standard 2A solution Multi-element (no Hg) Standard 1 Mixed Multi-element calibration
for ICP-MS, NIST certified for ICP, NIST certified
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
100 mÒ Plastic bottle 1196-5557 SPCLMS2AN 100 mÒ Plastic bottle 1196-1636 SPMIXSTD1100
H314
H315, H319
see the complete information (Application, Content & Matrix) in the Standard solu- see the complete information (Application, Content & Matrix) in the Standard solu-
tion section page 322 tion section page 322
Check with your local distributor for availability of Spex product Check with your local distributor for availability of Spex product
328
Standard 5A Mixed Multi-element calibration | S
Standard 3 Mixed Multi-element calibration Standard 4A Mixed Multi-element calibration
for ICP, NIST certified for ICP, NIST certified
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
500 mÒ Plastic bottle 1195-1646 SPMIXSTD3500 500 mÒ Plastic bottle 1191-1656 SPMIXSTD4A500
H315, H319
H314
see the complete information (Application, Content & Matrix) in the Standard solu- see the complete information (Application, Content & Matrix) in the Standard solu-
tion section page 322 tion section page 322
Check with your local distributor for availability of Spex product Check with your local distributor for availability of Spex product
Standard 3A Mixed Multi-element calibration Standard 5 Mixed Multi-element calibration
for ICP, NIST certified for ICP, NIST certified
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
100 mÒ Plastic bottle 1196-1646 SPMIXSTD3A100 100 mÒ Plastic bottle 1192-1656 SPMIXSTD5100
H314
H314
see the complete information (Application, Content & Matrix) in the Standard solu- see the complete information (Application, Content & Matrix) in the Standard solu-
tion section page 322 tion section page 322
Check with your local distributor for availability of Spex product Check with your local distributor for availability of Spex product
Standard 3A Mixed Multi-element calibration Standard 5 Mixed Multi-element calibration
for ICP, NIST certified for ICP, NIST certified
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
500 mÒ Plastic bottle 1197-1646 SPMIXSTD3A500 500 mÒ Plastic bottle 1193-1656 SPMIXSTD5500
H314
H314
see the complete information (Application, Content & Matrix) in the Standard solu- see the complete information (Application, Content & Matrix) in the Standard solu-
tion section page 322 tion section page 322
Check with your local distributor for availability of Spex product Check with your local distributor for availability of Spex product
Standard 4 Mixed Multi-element calibration Standard 5A Mixed Multi-element calibration
for ICP, NIST certified for ICP, NIST certified
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
100 mÒ Plastic bottle 1198-1646 SPMIXSTD4100 100 mÒ Plastic bottle 1194-1656 SPMIXSTD5A100
H314
H314
see the complete information (Application, Content & Matrix) in the Standard solu- see the complete information (Application, Content & Matrix) in the Standard solu-
tion section page 322 tion section page 322
Check with your local distributor for availability of Spex product Check with your local distributor for availability of Spex product
Standard 4 Mixed Multi-element calibration Standard 1 Mixed Multi-element calibration
for ICP, NIST certified for ICP, NIST certified
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
500 mÒ Plastic bottle 1199-1646 SPMIXSTD4500 500 mÒ Plastic bottle 1197-1636 SPMIXSTD1500
H314
H315, H319
see the complete information (Application, Content & Matrix) in the Standard solu- see the complete information (Application, Content & Matrix) in the Standard solu-
tion section page 322 tion section page 322
Check with your local distributor for availability of Spex product Check with your local distributor for availability of Spex product
Standard 4A Mixed Multi-element calibration Standard 5A Mixed Multi-element calibration
for ICP, NIST certified for ICP, NIST certified
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
100 mÒ Plastic bottle 1190-1656 SPMIXSTD4A100 500 mÒ Plastic bottle 1195-1656 SPMIXSTD5A500
H314
H314
see the complete information (Application, Content & Matrix) in the Standard solu- see the complete information (Application, Content & Matrix) in the Standard solu-
tion section page 322 tion section page 322
Check with your local distributor for availability of Spex product Check with your local distributor for availability of Spex product
329
S | Standard 1A Mixed Multi-element calibration
Standard 1A Mixed Multi-element calibration Standard 3 Mixed Multi-element calibration
for ICP, NIST certified for ICP, NIST certified
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
100 mÒ Plastic bottle 1198-1636 SPMIXSTD1A100 100 mÒ Plastic bottle 1194-1646 SPMIXSTD3100
H314
H315, H319
see the complete information (Application, Content & Matrix) in the Standard solu- see the complete information (Application, Content & Matrix) in the Standard solu-
tion section page 322 tion section page 322
Check with your local distributor for availability of Spex product Check with your local distributor for availability of Spex product
Standard 1A Mixed Multi-element calibration Standard Plasma emission Kit 1 (38 elements)
for ICP, NIST certified for ICP, NIST certified
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
500 mÒ Plastic bottle 1199-1636 SPMIXSTD1A500
H314 100 mÒ Plastic bottle 1199-6706 SPICPKIT1
see the complete information (Application, Content & Matrix) in the Standard solu-
tion section page 322
Check with your local distributor for availability of Spex product
see the complete information (Application, Content & Matrix) in the Standard solu- Standard Plasma emission Kit 2 (13 elements)
tion section page 322
Check with your local distributor for availability of Spex product for ICP, NIST certified
Standard 2 Mixed Multi-element calibration packaging Cat. No Mfr. No
for ICP, NIST certified 100 mÒ Plastic bottle 1193-1626 SPICPKIT2
packaging Cat. No Mfr. No see the complete information (Application, Content & Matrix) in the Standard solu-
100 mÒ Plastic bottle 1190-1646 SPMIXSTD2100 tion section page 322
H314 Check with your local distributor for availability of Spex product
see the complete information (Application, Content & Matrix) in the Standard solu- Standard Plasma emission Kit 3 (10 elements)
tion section page 322
Check with your local distributor for availability of Spex product for ICP, NIST certified
Standard 2 Mixed Multi-element calibration packaging Cat. No Mfr. No
for ICP, NIST certified 100 mÒ Plastic bottle 1194-1626 SPICPKIT3
see the complete information (Application, Content & Matrix) in the Standard solu-
tion section page 322
Check with your local distributor for availability of Spex product
packaging Cat. No Mfr. No Standard Plasma emission Kit 3 (15 elements)
500 mÒ Plastic bottle 1191-1646 SPMIXSTD2500
H314 for ICP, NIST certified
see the complete information (Application, Content & Matrix) in the Standard solu- packaging Cat. No Mfr. No
tion section page 322
Check with your local distributor for availability of Spex product 100 mÒ Plastic bottle 1195-1626 SPICPKIT4
see the complete information (Application, Content & Matrix) in the Standard solu-
tion section page 322
Check with your local distributor for availability of Spex product
Standard 2A Mixed Multi-element calibration Standard Tuning solution 1
for ICP, NIST certified for ICP-MS, NIST certified
packaging Cat. No Mfr. No packaging
100 mÒ Plastic bottle 1192-1646 SPMIXSTD2A100 100 mÒ Plastic bottle
H314 H315, H319
Cat. No Mfr. No
1266-9585 SPCLTUNE1
see the complete information (Application, Content & Matrix) in the Standard solu- see the complete information (Application, Content & Matrix) in the Standard solu-
tion section page 322 tion section page 322
Check with your local distributor for availability of Spex product Check with your local distributor for availability of Spex product
Standard 2A Mixed Multi-element calibration
for ICP, NIST certified
packaging Cat. No Mfr. No
500 mÒ Plastic bottle 1193-1646 SPMIXSTD2A500
H314
see the complete information (Application, Content & Matrix) in the Standard solu-
tion section page 322
Check with your local distributor for availability of Spex product
330
Strontium standard metal solution 1000 ppm | S
Starch Certified AR Stearic acid SLR
for analysis, soluble specified reagents for general laboratory work- extra pure Mfr. No
S/8130/48
packaging Cat. No Mfr. No packaging Cat. No S/8130/53
250 g Plastic jar 1067-7612 S/8000/50
500 g Plastic jar 1042-7270 S/8000/53 100 g Plastic jar 1142-8962
1 kg Plastic jar 1044-7460 S/8000/60 500 g Plastic jar 1069-4732
(C6 H10 O5 )n
CAS: 9005-25-8 <15% Sensitivity to iodine : Pass C18H36O2 EINECS: 200-313-4
Density at 20°C: 1.5 : <0.2% Acidity <0.01 meq/g CAS: 57-11-4 UN: 1325
EINECS: 232-679-6 MW: 284.47 GHS: Flam. Sol. 2, Skin Irrit.
<0.5% Total chloride (Cl) <0.005% Density at 20°C: 0.840 2, Eye Irrit. 2, STOT SE 3
Guaranteed analysis Boiling point: 361 °C H228, H319, H335, H315
Loss on drying Melting point: 67 to 69 °C P261, P302+P352, P280,
Reducing substances Flash point: 196 °C P305+P351+P338, P233, P210
Sulfated ash ADR/RID: 4.1, III
Lot analysis on the label. Assay: >97%
The product may contain other chain length fatty acids.
Starch, soluble Stearic anhydride SLR
specified reagents for general laboratory work- extra pure SLR specified reagents for general laboratory work- extra pure Mfr. No
S/8144/48
packaging Cat. No
packaging Cat. No Mfr. No 100 g Plastic jar 1056-8260
250 g Plastic jar 1141-3673
500 g Plastic jar 1011-2450 S/7960/50 C36H70O3 EINECS: 211-318-6
1 kg Plastic jar 1008-0410 S/7960/53 CAS: 638-08-4 UN: 3261
S/7960/60 MW: 550.95 GHS: Skin Corr. 1B, Eye Dam. 1
(C6 H10 O5 )n : Pass Density at 20°C: 0.840 H314
CAS: 9005-25-8 Melting point: 69 to 71 °C P301+P330+P331, P280,
Density at 20°C: 1.5 ADR/RID: 8, III P305+P351+P338, P310
EINECS: 232-679-6
Assay: >97%
Guaranteed analysis
Identity test In determining the hydroxyl groups in the alcohol and phenols.
Sully, Analyst, 1962.87.
Starch, maize SLR Strontium standard metal solution 1000 ppm
specified reagents for general laboratory work- extra pure Mfr. No for AAS, solution HNO3 1M
S/7880/60
packaging Cat. No packaging Cat. No Mfr. No
1 kg Plastic jar 1041-7080
(C6 H10 O5 )n 100 mÒ HDPE Plastic bottle 1263-6727 J/8166/05
CAS: 9005-25-8 : Pass 500 mÒ HDPE Plastic bottle 1053-8430 J/8166/08
Density at 20°C: 1.5
EINECS: 232-679-6 ADR/RID: 8, II H314
UN: 2031 P280, P305+P351+P338,
Guaranteed analysis GHS: Skin Corr. 1B, Eye Dam. 1 P301+P330+P331, P310
Identity test
Manufactured to a tolerance of ± 0.5%.
See also the full range in the Standard Elemental solution for Trace metal analysis
section see page 314.
Starch, potato SLR Strontium standard metal solution 1000 ppm
Mfr. No
specified reagents for general laboratory work- extra pure S/7920/60 for ICP, solution HNO3 1M
packaging Cat. No <0.5% packaging Cat. No Mfr. No
1 kg Plastic jar 1055-8070 J/8321/08
(C6 H10 O5 )n 500 mÒ HDPE Plastic bottle 1070-5531
CAS: 9005-25-8 <20% Residue after ignition
Density at 20°C: 1.5 ADR/RID: 8, II H314
EINECS: 232-679-6 UN: 2031 P280, P305+P351+P338,
GHS: Skin Corr. 1B, Eye Dam. 1 P301+P330+P331, P310
Guaranteed analysis
Loss on drying Manufactured to a tolerance of ± 0.5%.
All standards are manufactured from acids, metals & metal salts and contain less
than <10 ppm total metal impurites.
See also the full range in the Standard Elemental solution for Trace metal analysis
section see page 314.
All ICP standards are manufactured from acids, metal & metal salts Ultra pure qua-
lity and contain less than <10 ppm total metal impurites.
see also the full range of "Standard solution" in the Standard solution section.
Starch, wheat SLR
specified reagents for general laboratory work- extra pure
packaging Cat. No Mfr. No
1 kg Plastic jar 1077-4191 S/8040/60
(C6 H10 O5 )n
CAS: 9005-25-8 <0.3% Lead (Pb) See page 308 for more information
Density at 20°C: 1.5
EINECS: 232-679-6 <10 ppm
Guaranteed analysis
Residue after ignition
331
S | Strontium standard metal solution 10 000 ppm
Strontium standard metal solution 10 000 ppm Strontium carbonate SLR
Mfr. No
for ICP, solution HNO3 1M specified reagents for general laboratory work- extra pure S/8160/48
S/8160/53
packaging Cat. No Mfr. No packaging Cat. No
J/8320/05 100 g Plastic jar 1143-8962 <0.02%
100 mÒ HDPE Plastic bottle 1079-5521 500 g Plastic jar 1141-8862
SrCO3 Density at 20°C: 3.7
ADR/RID: 8, II H314 CAS: 1633-05-2 EINECS: 216-643-7
UN: 2031 P280, P305+P351+P338, MW: 147.63
GHS: Skin Corr. 1B, Eye Dam. 1 P301+P330+P331, P310 <20 ppm n-Butyl formate
Assay: >98%
Manufactured to a tolerance of ± 0.5%.
All standards are manufactured from acids, metals & metal salts and contain less Guaranteed analysis
than <10 ppm total metal impurites. Iron (Fe)
See also the full range in the Standard Elemental solution for Trace metal analysis
section see page 314.
Strontium standard metal solution 1000 ppm Strontium chloride Certified AR
for ICP solution in HNO3 2%, NIST certified for analysis Cat. No Mfr. No
S/8320/50
packaging Cat. No Mfr. No packaging 1142-3673 S/8320/53
100 mÒ Plastic bottle 250 g Plastic jar 1149-3723
250 mÒ Plastic bottle 1191-3723 SPPLSR22Y 500 g Plastic jar <100 ppm
500 mÒ Plastic bottle 1199-3713 SPPLSR22T GHS: Skin Irrit. 2, Eye Dam. <200 ppm
1190-3723 SPPLSR22X Cl2Sr.6H2O 1, STOT SE 3
H315, H320 CAS: 10025-70-4 H315, H335, H318 <50 ppm
MW: 266.62 P280, P305+P351+P338 <50 ppm
Density at 20°C: 1.9 <20 ppm
Melting point: 115 °C <20 ppm
Manufactured to a tolerance of ± 0.5%. Assay: 99 to 102% <5 ppm
All standards are manufactured from acids, metals & metal salts and contain less <5 ppm
than <10 ppm total metal impurites. Guaranteed analysis <0.0005 meq/g Potassium (K) <5 ppm
See also the full range in the Standard Elemental solution for Trace metal analysis <500 ppm Sodium (Na) <5 ppm
section see page 314. Acidity <2 ppm Total nitrogen (N) <5 ppm
Check with your local distributor for availability of Spex product Calcium (Ca) <5 ppm Total silicon (Si) <5 ppm
Copper (Cu) <2 ppm Total sulphur (S)
Strontium standard metal solution 1000 ppm Iron (Fe) <50 ppm Zinc (Zn)
Lead (Pb)
for ICP solution in HCL 2%, NIST certified Magnesium (Mg) Manganese (Mn)
Molybdenum (Mo)
packaging Cat. No Mfr. No Typical analysis <5 ppm Nickel (Ni)
<0.002% Silver (Ag)
500 mÒ Plastic bottle 1197-3713 SPPLSR12X Aluminium (Al) Titanium (Ti)
Barium (Ba) <5 ppm Vanadium (V)
Manufactured to a tolerance of ± 0.5%. Cadmium (Cd) <5 ppm
All standards are manufactured from acids, metals & metal salts and contain less Chromium (Cr) <5 ppm
than <10 ppm total metal impurites. Cobalt (Co) <5 ppm
See also the full range in the Standard Elemental solution for Trace metal analysis Lithium (Li)
section see page 314.
Check with your local distributor for availability of Spex product Lot analysis on the label
Strontium chloride hexahydrate SLR
specified reagents for general laboratory work- extra pure
Strontium standard metal solution 10 000 ppm packaging Cat. No Mfr. No
for ICP solution in HNO3 5%, NIST certified 250 g Plastic jar 1143-3673 S/8280/50
500 g Plastic jar 1024-4400 S/8280/53
packaging Cat. No Mfr. No Cl2Sr.6H2O EINECS: 233-971-6
100 mÒ Plastic bottle CAS: 10025-70-4 GHS: Skin Irrit. 2, Eye Dam.
500 mÒ Plastic bottle 1193-3723 SPPLSR23Y MW: 266.62 1, STOT SE 3
1192-3723 SPPLSR23X Density at 20°C: 1.92 H315, H335, H318
H314 Melting point: 115 °C P280, P305+P351+P338
Manufactured to a tolerance of ± 0.5%. Assay: >98% <1000 ppm Potassium (K) <200 ppm
All standards are manufactured from acids, metals & metal salts and contain less <10 ppm Sodium (Na) <500 ppm
than <10 ppm total metal impurites. Guaranteed analysis <20 ppm Total silicon (Si) <200 ppm
See also the full range in the Standard Elemental solution for Trace metal analysis <10 ppm Total sulphur (S) <100 ppm
section see page 314. Calcium (Ca) Zinc (Zn) <100 ppm
Check with your local distributor for availability of Spex product Copper (Cu) <200 ppm
Iron (Fe)
Lead (Pb)
Magnesium (Mg)
Strontium standard metal solution 10 000 ppm
for ICP solution in HCL 5%, NIST certified
packaging Cat. No Mfr. No
500 mÒ Plastic bottle 1140-8859 PLSR13X
Manufactured to a tolerance of ± 0.5%. See page 308 for more information
All standards are manufactured from acids, metals & metal salts and contain less
than <10 ppm total metal impurites.
See also the full range in the Standard Elemental solution for Trace metal analysis
section see page 314.
Check with your local distributor for availability of Spex product
332
Sucrose | S
Strontium nitrate anhydrous Certified AR Succinic acid Certified AR
for analysis for analysis
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
S/8402/53 S/8522/50
500 g Plastic jar 1021-4450 250 g Plastic jar 1072-4771 S/8522/53
<5 ppm 500 g Plastic jar 1140-3733 S/8522/68
N2O6Sr UN: 1507 <5 ppm 10 kg Plastic keg 1062-8333
CAS: 10042-76-9 GHS: Ox. Sol. 3, Acute Tox. <5 ppm <2 ppm
MW: 211.63 4, Skin Irrit. 2, Eye Irrit. 2, <54 ppm C4H6O4 EINECS: 203-740-4 <2 ppm
Boiling point: 645 °C STOT SE 3 <5 ppm CAS: 110-15-6 GHS: Skin Irrit. 2, Eye Irrit. 2, <50 ppm
Melting point: 570 °C H272, H315, H335, H319, H302 <50 ppm MW: 118.09 STOT SE 3 <50 ppm
ADR/RID: 5.1, III P220, P261, P280, <5 ppm Density at 20°C: 1.56 H315, H319, H335 <2 ppm
EINECS: 233-131-9 P305+P351+P338 <0.001% Boiling point: 235 °C P261, P302+P352, P280, <0.001%
<50 ppm Melting point: 185 to 190 °C P305+P351+P338 <20 ppm
Assay: >99.5% <50 ppm Flash point: 206 °C <20 ppm
5 to 7 Manganese (Mn) <5 ppm <2 ppm Manganese (Mn) <20 ppm
Guaranteed analysis <5 ppm Molybdenum (Mo) <20 ppm Assay: >99.5% <2 ppm Nickel (Ni) <2 ppm
Nickel (Ni) <2 ppm Potassium (K) <10 ppm
pH (aqueous solution 5%) <0.2% Potassium (K) SLR Guaranteed analysis <50 ppm Sodium (Na)
Aluminium (Al) <5 ppm Propan--1-ol <2 ppm Titanium (Ti) SLR
Barium (Ba) <500 ppm Sodium (Na) Aluminium (Al) <2 ppm n-Butyl formate
Cadmium (Cd) <5 ppm Titanium (Ti) Barium (Ba) <5 ppm Total nitrogen (N) Mfr. No
Calcium (Ca) <5 ppm n-Butyl formate Cadmium (Cd) <5 ppm Total silicon (Si) S/8520/53
Chromium (Cr) <2 ppm Total silicon (Si) Calcium (Ca) <5 ppm Total sulphur (S)
Cobalt (Co) <5 ppm Total sulphur (S) Chromium (Cr) <2 ppm Vanadium (V) <200 ppm
Copper (Cu) <2.4 ppm Vanadium (V) Cobalt (Co) <20 ppm Zinc (Zn) <0.005%
Iron (Fe) <5 ppm Zinc (Zn) Copper (Cu)
Lead (Pb) <10 ppm Iron (Fe) <100 ppm
Lithium (Li) Lead (Pb) <100 ppm
Magnesium (Mg) Lithium (Li)
Magnesium (Mg) <50 ppm
Lot analysis on the label.
Strontium nitrate anhydrous Succinic acid
specified reagents for general laboratory work- extra pure specified reagents for general laboratory work- extra pure
packaging Cat. No Mfr. No packaging Cat. No
S/8400/53
500 g Plastic jar 1025-4400 500 g Plastic jar 1071-4581
<200 ppm
N2O6Sr UN: 1507 <0.01% C4H6O4 EINECS: 203-740-4
CAS: 10042-76-9 GHS: Ox. Sol. 3, Acute Tox. CAS: 110-15-6 GHS: Skin Irrit. 2, Eye Irrit. 2,
MW: 211.63 4, Skin Irrit. 2, Eye Irrit. 2, <200 ppm MW: 118.09 STOT SE 3
Density at 20°C: 2.99 STOT SE 3 <200 ppm Density at 20°C: 1.56 H315, H319, H335
Boiling point: 645 °C H272, H315, H335, H319, H302 <100 ppm Boiling point: 235 °C P261, P302+P352, P280,
Melting point: 570 °C P220, P261, P280, Melting point: 185 to 190 °C P305+P351+P338
ADR/RID: 5.1, III P305+P351+P338 Flash point: 206 °C
EINECS: 233-131-9
Assay: >99%
Assay: >99%
<1000 ppm Sodium (Na) Guaranteed analysis <200 ppm Sodium (Na)
Guaranteed analysis <10 ppm n-Butyl formate <20 ppm n-Butyl formate
<20 ppm Total silicon (Si) Calcium (Ca) <20 ppm Total silicon (Si)
Calcium (Ca) <10 ppm Total sulphur (S) Copper (Cu) <20 ppm Total sulphur (S)
Copper (Cu) <50 ppm Zinc (Zn) Iron (Fe) Zinc (Zn)
Iron (Fe) Lead (Pb) <100 ppm
Lead (Pb) <200 ppm Magnesium (Mg) <200 ppm
Magnesium (Mg) Potassium (K)
Potassium (K)
Styrene stabilized with 10-15 ppm tert-butylcatechol Sucrose
pure for electrophoresis
packaging Cat. No Mfr. No packaging
500 g Plastic jar
250 mÒ Glass bottle 1268-5895 S/8480/07 3 kg Plastic jar Cat. No Mfr. No
1Ò Glass bottle 1045-7460 S/8480/15 C12H22O11 1064-5312 S/P770/53
2.5 Ò Glass bottle 1023-4450 S/8480/17 CAS: 57-50-1 1007-0330 S/P770/63
25 Ò Metal drum 1262-8655 S/8480/25 MW: 342.30 Melting point: 190 to 192 °C
EINECS: 200-334-9 <0.5 ppm
C8H8 EINECS: 202-851-5 Guaranteed analysis <5 ppm
CAS: 100-42-5 UN: 2055 Reducing sugars : <0.005% Lead (Pb)
MW: 104.15 GHS: Flam. Liq. 3, Acute Copper (Cu) <0.5 ppm Total chloride (Cl)
Density at 20°C: 0.906 Tox. 4, Skin Irrit. 2, Eye Irrit. 2 Iron (Fe) <0.5 ppm
Boiling point: 145 to 146 °C H226, H332, H319, H315
Melting point: -31 °C P304+P340, P302+P352,
Flash point: 31 °C P280, P305+P351+P338, P210
ADR/RID: 3, III
See page 308 for more information
333
S | Sucrose
Sucrose Certified AR, Eur.Ph., BP Sudan IV, C.I. 26105
for analysis technical
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
S/8625/46
500 g Plastic jar 1034-6150 S/8600/53 25 g Glass jar 1144-8862
1 kg Plastic jar 1063-4932 S/8600/60
3 kg Plastic jar 1025-4590 S/8600/63 C24H20N4O GHS: Skin Irrit. 2, Eye Irrit. 2,
5 kg Plastic keg 1002-0440 S/8600/65 CAS: 85-83-6 STOT SE 3
10 kg Plastic keg 1003-0440 S/8600/68 MW: 380.45 H319, H315, H335
25 kg Fibre Keg 1034-5892 S/8600/70 Melting point: 181.1 °C P261, P280, P302+P352,
EINECS: 201-635-8 P305+P351+P338
C12H22O11 Melting point: 190 to 192 °C Guaranteed analysis
CAS: 57-50-1 EINECS: 200-334-9 Complies with standard IR spectrum: Pass
MW: 342.30
Guaranteed analysis <0.0008 meq/g Magnesium (Mg) <5 ppm Sulfate standard solution 1000 ppm (1 mg/ml )
<0.03% Potassium (K) <20 ppm
Acidity / Alkalinity Sodium (Na) <50 ppm for Ion pair chromatography, Ready-to-use
Loss on drying 66.4° to 66.6° Total chloride (Cl) <0.001%
Specific rotation : <0.005% Total nitrogen (N) <20 ppm packaging Cat. No Mfr. No
Reducing sugars <0.005% Total phosphorus (P) <20 ppm 100 mÒ HDPE Plastic bottle 1036-6280 J/4564/05
Insoluble matter : <0.05% Total silicon (Si) Manufactured to a tolerance of ± 1%.
Invert sugar <10 ppm Total sulphur (S) <5 ppm
Calcium (Ca) <1 ppm Zinc (Zn) <20 ppm
Copper (Cu) <1 ppm Residue after ignition <10 ppm
Iron (Fe) <1 ppm
Lead (Pb) <0.01%
Typical analysis <2 ppm Lithium (Li) <2 ppm Sulfate standard 1000 ppm
<2 ppm Manganese (Mn) <2 ppm
Aluminium (Al) <2 ppm Nickel (Ni) <2 ppm For Ion chromatography in H2O, NIST certified
Arsenic (As) <2 ppm Titanium (Ti) <2 ppm
Barium (Ba) <2 ppm Vanadium (V) <2 ppm packaging Cat. No Mfr. No
Cadmium (Cd) <2 ppm
Chromium (Cr) SLR SPASSO492Y
Cobalt (Co) SPASSO492X
Lot analysis on the label. 100 mÒ Plastic bottle 1191-9432
500 mÒ Plastic bottle 1190-9432
Sucrose Manufactured to a tolerance of ± 0.3%.
Check with your local distributor for availability of Spex product
specified reagents for general laboratory work- extra pure
packaging Cat. No Mfr. No
S/8560/53
500 g Plastic jar 1000-0430 S/8560/60 Sulfate-sulfur standard 1000 ppm
1 kg Plastic jar 1038-6100 S/8560/63
3 kg Plastic jar 1017-2540 S/8560/65 For Ion chromatography in H2O, NIST certified
5 kg Plastic keg 1074-4771
<200 ppm packaging Cat. No Mfr. No
Melting point: 190 to 192 °C <0.002% SPASSO4S92Y
C12H22O11 EINECS: 200-334-9 100 mÒ Plastic bottle 1199-9422 SPASSO4S92X
CAS: 57-50-1 <100 ppm
MW: 342.30 <20 ppm 500 mÒ Plastic bottle 1198-9422 Certified AR
Guaranteed analysis <100 ppm Manufactured to a tolerance of ± 0.3%.
<500 ppm Check with your local distributor for availability of Spex product
Calcium (Ca)
Copper (Cu) <50 ppm Sodium (Na) Sulfamic acid
Iron (Fe) <5 ppm n-Butyl formate
Lead (Pb) <5 ppm Total phosphorus (P) for analysis
Magnesium (Mg) <5 ppm Total silicon (Si)
Potassium (K) Total sulphur (S)
<20 ppm Zinc (Zn)
<100 ppm
Sudan black B C.I. 26150 packaging Cat. No Mfr. No
S/8641/53
pure 500 g Plastic jar 1065-5312 S/8641/68
10 kg Plastic keg 1044-0394
packaging Cat. No Mfr. No <50 ppm
S/8630/46 H3SO3N UN: 2967 <50 ppm
25 g Glass jar 1065-5122 CAS: 5329-14-6 GHS: Skin Irrit. 2, Eye Irrit. 2,
Mfr. No MW: 97.09 Aquatic Chronic 3 <0.02%
C29H24N6 Melting point: 120 to 124 °C S/8620/46 Density at 20°C: 2.15 H412, H315, H319 <0.001%
CAS: 4197-25-5 EINECS: 224-087-1 Melting point: 200 to 208 °C P280, P305+P351+P338, <20 ppm
MW: 456.54 ADR/RID: 8, III P273, P302+P350 <10 ppm
EINECS: 226-218-8
Guaranteed analysis <5 ppm
Complies with standard IR spectrum: Pass Assay: >99.9% <5 ppm
<5 ppm
Sudan III, C.I. 26100 Cat. No Guaranteed analysis <5 ppm Potassium (K) <5 ppm
1289-7182 <20 ppm Sodium (Na) <5 ppm
technical Cadmium (Cd) Sulfate (SO4) <5 ppm
Calcium (Ca) <5 ppm Total chloride (Cl)
packaging Copper (Cu) <5 ppm Total silicon (Si)
25 g Glass jar Iron (Fe) <5 ppm Zinc (Zn)
C22H16N4O Lead (Pb) <10 ppm
CAS: 85-86-9 Magnesium (Mg)
MW: 352.38 <5 ppm Molybdenum (Mo)
EINECS: 201-638-4 Typical analysis <5 ppm Nickel (Ni)
<5 ppm Silver (Ag)
Guaranteed analysis Aluminium (Al) <5 ppm Strontium (Sr)
Complies with standard IR spectrum: Pass Barium (Ba) <5 ppm Titanium (Ti)
Chromium (Cr) <5 ppm Vanadium (V)
Cobalt (Co)
Lithium (Li)
Manganese (Mn)
Lot analysis on the label.
334
Sulfur standard standard metal solution 10 000 ppm | S
Sulfamic acid SLR Sulfanilic acid SLR
specified reagents for general laboratory work- extra pure specified reagents for general laboratory work- extra pure Mfr. No
S/8680/53
packaging Cat. No Mfr. No packaging Cat. No
S/8640/53 <200 ppm
500 g Plastic jar 1004-0450 S/8640/70 500 g Plastic jar 1043-9380 <0.05%
25 kg Fibre Keg 1199-4111 <0.02%
<200 ppm C6H7NO3S GHS: Skin Irrit. 2, Eye Irrit. 2,
H3SO3N UN: 2967 <200 ppm CAS: 121-57-3 Skin Sens. 1 <100 ppm
CAS: 5329-14-6 GHS: Skin Irrit. 2, Eye Irrit. 2, MW: 173.19 H319, H317, H315 <50 ppm
MW: 97.09 Aquatic Chronic 3 <0.05% Density at 20°C: 1.485 to 250 C P280, P302+P352,
Density at 20°C: 2.15 H412, H315, H319 <100 ppm Melting point: 365 °C P305+P351+P338
Melting point: 200 to 208 °C P280, P305+P351+P338, EINECS: 204-482-5
ADR/RID: 8, III P273, P302+P350 <50 ppm
EINECS: 226-218-8 Assay: >99%
Assay: >99% Guaranteed analysis <100 ppm Sodium (Na)
<20 ppm Sulfate (SO4)
Guaranteed analysis <100 ppm Potassium (K) Calcium (Ca) <20 ppm n-Butyl formate
<20 ppm Sodium (Na) Copper (Cu) <20 ppm Total silicon (Si)
Calcium (Ca) <20 ppm Sulfate (SO4) Iron (Fe) <50 ppm Zinc (Zn)
Copper (Cu) <20 ppm Total silicon (Si) Lead (Pb)
Iron (Fe) <50 ppm Zinc (Zn) Magnesium (Mg) <200 ppm
Lead (Pb) Potassium (K)
Magnesium (Mg)
Sulfanilamide SLR 5-Sulfosalicylic acid dihydrate Certified AR
Mfr. No
specified reagents for general laboratory work- extra pure S/8660/50 for analysis Mfr. No
S/8850/48
packaging Cat. No <40 ppm packaging Cat. No S/8850/53
<10 ppm
250 g Plastic jar 1073-3811 100 g Plastic jar 1043-9570 <50 ppm
<0.04% 500 g Plastic jar 1044-9570 <0.001%
C6H8N2O2S GHS: Skin Irrit. 2, Eye Irrit. 2, <20 ppm
CAS: 63-74-1 STOT SE 3 C7H6O6S.2H2O GHS: Acute Tox. 4, Skin <10 ppm
MW: 172.21 H315, H335, H319 CAS: 5965-83-3 Corr. 1B, Eye Dam. 1
Melting point: 163 to 167 °C P261, P302+P352, P280, MW: 254.21 H314, H302 <0.01%
EINECS: 200-563-4 P305+P351+P338 Melting point: 106 to 110 °C P301+P330+P331, P280,
ADR/RID: 8, III P305+P351+P338, P310,
Assay: >99% EINECS: 202-555-6 P303+P361+P353
UN: 2585
Guaranteed analysis <0.5% Iron (Fe) <50 ppm Sodium (Na)
<0.1% Lead (Pb) Assay: 99.5 to 101.5% <10 ppm n-Butyl formate
Loss on drying 164.5 to 166.5 °C n-Butyl formate <10 ppm Total silicon (Si)
Residue after ignition Guaranteed analysis <10 ppm Zinc (Zn)
Melting Point tested <20 ppm Salicylic acid
Calcium (Ca) <50 ppm
Sulfanilic acid Certified AR Copper (Cu)
Iron (Fe)
for analysis Lead (Pb)
Magnesium (Mg)
Potassium (K)
packaging Cat. No Mfr. No
100 g Plastic jar 1055-9390 S/8720/48 Sulfur standard standard metal solution 1000 ppm
C6H7NO3S GHS: Skin Irrit. 2, Eye Irrit. 2, for ICP, solution aqueous
CAS: 121-57-3 Skin Sens. 1
MW: 173.19 H319, H317, H315 packaging Cat. No Mfr. No
Density at 250°C: 1.485 P280, P302+P352,
Melting point: 365 °C P305+P351+P338 500 mÒ HDPE Plastic bottle 1046-7450 J/8324/08
EINECS: 204-482-5
<20 ppm Potassium (K) <50 ppm Manufactured to a tolerance of ± 0.5%.
Assay: >99% <5 ppm Sodium (Na) <50 ppm All standards are manufactured from acids, metals & metal salts and contain less
<5 ppm Sulfate (SO4) <0.005% than <10 ppm total metal impurites.
Guaranteed analysis <5 ppm n-Butyl formate <0.002% See also the full range in the Standard Elemental solution for Trace metal analysis
Total silicon (Si) <20 ppm section see page 314.
Calcium (Ca) <10 ppm Zinc (Zn) <10 ppm
Copper (Cu) <0.00005% Sulfur standard standard metal solution 10 000 ppm
Iron (Fe)
Lead (Pb) for ICP, solution aqueous
Magnesium (Mg)
Nitrite (NO2) packaging Cat. No Mfr. No
Lot analysis on the label.
100 mÒ HDPE Plastic bottle 1012-1480 J/8323/05
Manufactured to a tolerance of ± 0.5%.
All standards are manufactured from acids, metals & metal salts and contain less
than <10 ppm total metal impurites.
See also the full range in the Standard Elemental solution for Trace metal analysis
section see page 314.
A full range to discover on page 63
335
S | Sulfur standard metal solution 1000 ppm
Sulfur standard metal solution 1000 ppm Sulfuric acid 93-98% Optima
for ICP solution in H2O, NIST certified for ultra trace elemental analysis
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
100 mÒ Plastic bottle 1196-3723 SPPLS92Y 250 mÒ Pre-cleaned Teflon FEP bottle 1193-4091 A468-250
500 mÒ Pre-cleaned Teflon FEP bottle 1194-4091 A468-500
250 mÒ Plastic bottle 1194-3723 SPPLS92T 1 Ò Pre-cleaned Teflon FEP bottle 1192-4091
A468-1
500 mÒ Plastic bottle 1195-3723 SPPLS92X
Manufactured to a tolerance of ± 0.5%. H2SO4 EINECS: 231-639-5
All standards are manufactured from acids, metals & metal salts and contain less CAS: 7664-93-9 UN: 1830
than <10 ppm total metal impurites. MW: 98.07 GHS: Skin Corr. 1A, Eye Dam. 1
See also the full range in the Standard Elemental solution for Trace metal analysis Density at 20°C: 1.84 H314
section see page 314. Boiling point: 290 °C P301+P330+P331,
Check with your local distributor for availability of Spex product Melting point: 10 °C P305+P351+P338, P280
ADR/RID: 8, II
Assay: 93-98%
Sulfur standard metal solution 10 000 ppm Guaranteed analysis <10 ppt Magnesium (Mg) <50 ppt
<10 ppt Manganese (Mn) <10 ppt
for ICP solution in H2O, NIST certified Zirconium (Zr) <10 ppt Mercury (Hg) <100 ppt
Gallium (Ga) <10 ppt Molybdenum (Mo) <10 ppt
packaging Cat. No Mfr. No Terbium (Tb) <10 ppt Neodymium (Nd) <50 ppt
Indium (In) <50 ppt Nickel (Ni) <50 ppt
100 mÒ Plastic bottle 1198-3723 SPPLS93Y Dysprosium (Dy) <50 ppt Potassium (K) <50 ppt
Aluminium (Al) <500 ppt Praseodymium (Pr) <10 ppt
500 mÒ Plastic bottle 1197-3723 SPPLS93X Antimony (Sb) <10 ppt Rhodium (Rh) <50 ppt
Arsenic (As) <10 ppt Samarium (Sm) <10 ppt
Manufactured to a tolerance of ± 0.5%. Barium (Ba) <10 ppt Scandium (Sc) <10 ppt
All standards are manufactured from acids, metals & metal salts and contain less Beryllium (Be) <10 ppt Selenium (Se) <500 ppt
than <10 ppm total metal impurites. Bismuth (Bi) <50 ppt Propan--1-ol <50 ppt
See also the full range in the Standard Elemental solution for Trace metal analysis Cadmium (Cd) <10 ppt Sodium (Na) <50 ppt
section see page 314. Calcium (Ca) <10 ppt Tantalum (Ta) <100 ppt
Check with your local distributor for availability of Spex product Cerium (Ce) <10 ppt Tellurium (Te) <50 ppt
Cesium (Cs) <10 ppt Thallium (Tl) <10 ppt
Sulfur precipitated SLR Chromium (Cr) <10 ppt Thorium (Th) <10 ppt
Mfr. No Cobalt (Co) <10 ppt Thulium (Tm) <10 ppt
specified reagents for general laboratory work- extra pure S/8990/53 Copper (Cu) <10 ppt Tin (Sn) <50 ppt
Erbium (Er) <10 ppt Titanium (Ti) <50 ppt
packaging Cat. No <0.025% Europium (Eu) <100 ppt Uranium (U) <10 ppt
1002-0380 <2 ppm Gadolinium (Gd) <10 ppt Vanadium (V) <10 ppt
500 g Plastic jar ADR/RID: 4.1, III Germanium (Ge) <10 ppt Ytterbium (Yb) <10 ppt
EINECS: 231-722-6 Hafnium (Hf) <50 ppt Yttrium (Y) <10 ppt
S UN: 1350 Holmium (Ho) <10 ppt Zinc (Zn) <50 ppt
CAS: 7704-34-9 GHS: Skin Irrit. 2 Iron (Fe) <10 ppt Platinum (Pt) <50 ppt
MW: 32.05 H315 Lanthanum (La) <10 ppt Rubidium (Rb) <10 ppt
Density at 20°C: 2.07 P280, P302+P352, Lead (Pb) <10 ppt Tungsten (W) <10 ppt
Boiling point: 445 °C P321, P332+P313 Lithium (Li)
Melting point: 113 °C Lutetium (Lu)
Flash point: 168 °C <0.01 meq/g Sulfated ash
<0.2% Arsenic (As) Bottled in class 10 cleanroom conditions.Individually double-bagged in class 100
Guaranteed analysis cleanroom conditions. Each bottle is individually packaged.
Certificate of analysis delivered with each bottle.
Acidity
Water
Sulfur flowers SLR
specified reagents for general laboratory work- extra pure
packaging Cat. No Mfr. No Sulfuric acid 93-98% Trace Metal
1064-7422
1 kg Plastic jar 1046-9760 S/8920/60 for trace metal analysis
3 kg Plastic jar ADR/RID: 4.1, III S/8920/63
EINECS: 231-722-6
S UN: 1350 packaging Cat. No Mfr. No
CAS: 7704-34-9 GHS: Skin Irrit. 2 A510-P500
MW: 32.05 H315 500 mÒ HDPE plastic bottle 1139-5820
Density at 20°C: 2.07 P264, P280, P302+P352, 1 Ò HDPE plastic bottle 1131-5830 A510-P1
Boiling point: 445 °C P321, P332+P313, P362 2.5 Ò HDPE plastic bottle 1134-5830 A510-P212
Melting point: 113 °C
Flash point: 207.2 °C : Pass H2SO4 EINECS: 231-639-5 <0.5 ppm
CAS: 7664-93-9 UN: 1830 <0.5 ppm
Guaranteed analysis MW: 98.07 GHS: Skin Corr. 1A, Eye Dam. 1 <0.1 ppm
Density at 20°C: 1.84 H314 <0.1 ppm
Identity test Boiling point: 290 °C P301+P330+P331, <0.1 ppm
Melting point: 10 °C P305+P351+P338, P280 <0.1 ppm
ADR/RID: 8, II <0.1 ppm
Sulfur roll Cat. No Mfr. No <10 APHA Cobalt (Co)
1054-9580 S/8970/60 Assay: 93-98% <1 ppm Copper (Cu) <1 ppm
pure ADR/RID: 4.1/III <1 ppm Dysprosium (Dy) <0.5 ppb
EINECS: 231-722-6 Guaranteed analysis Erbium (Er) <0.1 ppm
packaging UN: 1350 <0.5 ppm Europium (Eu) <0.1 ppm
1 kg Plastic jar GHS: Skin Irrit. 2 Color <0.1 ppm Gadolinium (Gd)
H315 Aluminium (Al) <0.1 ppm Gallium (Ga)
S P264, P280, P302+P352, Antimony (Sb) <0.1 ppm Germanium (Ge)
CAS: 7704-34-9 P321, P332+P313, P362 Arsenic (As) <0.5 ppm Gold (Au)
MW: 32.05 Barium (Ba) Hafnium (Hf)
Density at 20°C: 2.07 : Pass Beryllium (Be) <1 ppm Holmium (Ho)
Boiling point: 445 °C Bismuth (Bi) <0.1 ppm
Melting point: 113 °C Cadmium (Cd) <0.1 ppm
Flash point: 207.2 °C Calcium (Ca) <0.5 ppm
Cerium (Ce)
Guaranteed analysis Cesium (Cs)
Identity test Chromium (Cr)
336
Sulfuric acid 95% | S
Indium (In) <0.1 ppm Silver (Ag) <1 ppm Guaranteed analysis <10 APHA Manganese (Mn) <0.02 ppm
Iron (Fe) <1 ppm Sodium (Na) <1 ppm Molybdenum (Mo) <0.02 ppm
Lanthanum (La) Strontium (Sr) <0.5 ppm Color <0.0001% Nickel (Ni)
Lead (Pb) <0.1 ppm Substances Substances <0.1 ppm Nitrate (NO3) <0.1 ppm
Lithium (Li) <0.1 ppm reducing KMnO4 <20 ppm reducing KMnO4 <0.05 ppm Potassium (K) <0.00002%
Lutetium (Lu) <0.5 ppm Tellurium (Te) <0.1 ppm Aluminium (Al) <0.02 ppm Sodium (Na)
Magnesium (Mg) <0.1 ppm Terbium (Tb) <0.1 ppm Barium (Ba) Strontium (Sr) <1 ppm
Manganese (Mn) Thallium (Tl) <0.1 ppm Cadmium (Cd) <1 ppm Titanium (Ti) <5 ppm
Mercury (Hg) <1 ppm Thorium (Th) <0.1 ppm Calcium (Ca) <0.1 ppm n-Butyl formate <0.02 ppm
Molybdenum (Mo) <0.5 ppm Thulium (Tm) <0.1 ppm Chromium (Cr) <0.02 ppm Total nitrogen (N) <0.02 ppm
Neodymium (Nd) <0.1 ppm Tin (Sn) Cobalt (Co) <0.1 ppm Total silicon (Si) <0.00002%
Nickel (Ni) <0.5 ppm Titanium (Ti) <1 ppm Copper (Cu) <0.5 ppm Vanadium (V) <5 ppm
Niobium (Nb) <0.1 ppm Total chloride (Cl) <1 ppm Iron (Fe) <0.1 ppm Zinc (Zn) <0.5 ppm
Nitrate (NO3) Total phosphorus (P) <0.7 ppm Lead (Pb) <0.02 ppm <0.02 ppm
Potassium (K) 0.5 Tungsten (W) <0.05 ppm Lithium (Li) <0.5 ppm <0.5 ppm
Praseodymium (Pr) <0.1 ppm Uranium (U) <0.5 ppm Magnesium (Mg)
Rhodium (Rh) <0.2 ppm Vanadium (V) <0.1 ppm
Rubidium (Rb) Ytterbium (Yb) <0.5 ppm Filtered to 10 µm.
Samarium (Sm) <1 ppm Yttrium (Y) <0.1 ppm
Scandium (Sc) <0.1 ppm Zinc (Zn) <0.1 ppm
Selenium (Se) <0.5 ppm <1 ppm
<0.5 ppm
<0.1 ppm
<0.1 ppm
<10 ppm
Bottled in class 10 cleanroom conditions.
Lot analysis on the label.
Sulfuric acid 95% Certified, Eur.Ph.
for analysis with low Cadmium, Lead & Mercury level
Sulfuric acid 95-98% d=1.83 Primar plus packaging Cat. No Mfr. No
S/9220/PB08
for trace metal analysis Mfr. No 500 mÒ HDPE Plastic bottle 1053-9960 S/9220/PB15
S/9231/PB07 1 Ò HDPE Plastic bottle 1261-5177 S/9220/PB17
packaging Cat. No S/9231/PB08 2.5 Ò HDPE Plastic bottle 1262-5177
S/9231/PB15 <0.005 ppm
250 mÒ HDPE Plastic bottle 1146-8932 S/9231/PB17 H2SO4 EINECS: 231-639-5 <0.01 ppm
500 mÒ HDPE Plastic bottle 1062-0714 CAS: 7664-93-9 UN: 1830 <0.05 ppm
1 Ò HDPE Plastic bottle 1046-6463 <0.005 ppm MW: 98.07 GHS: Skin Corr. 1A, Eye Dam. 1 <0.01 ppm
2.5 Ò HDPE Plastic bottle 1070-7263 <0.002 ppm Density at 20°C: 1.84 H314
<0.002 ppm Boiling point: 290 °C P301+P330+P331, <0.005 ppm
H2SO4 EINECS: 231-639-5 Melting point: 10 °C P305+P351+P338, P280 <0.05 ppm
CAS: 7664-93-9 UN: 1830 <0.02 ppm ADR/RID: 8, II <0.02 ppm
MW: 98.07 GHS: Skin Corr. 1A, Eye Dam. 1 <0.005 ppm <10 APHA Lead (Pb) <0.2 ppm
Density at 20°C: 1.84 H314 <0.002 ppm Assay: >95.0% Lithium (Li) <1 ppm
Boiling point: 290 °C P301+P330+P331, <2 ppm Magnesium (Mg) <0.1 ppm
Melting point: 10 °C P305+P351+P338, P280 <0.2 ppm Guaranteed analysis <0.05 ppm Manganese (Mn) <0.02 ppm
ADR/RID: 8, II <0.002 ppm <0.05 ppm Mercury (Hg) <0.05 ppm
<0.02 ppm Mercury (Hg) <0.005 ppm Color <0.01 ppm Molybdenum (Mo) <0.05 ppm
Assay: >95% <0.005 ppm Molybdenum (Mo) <0.005 ppm Substances <0.05 ppm Nickel (Ni) <0.01 ppm
<0.005 ppm Nickel (Ni) <0.002 ppm reducing KMnO4 <0.01 ppm Nitrate (NO3) <0.05 ppm
Guaranteed analysis Potassium (K) <0.00001% Zirconium (Zr) Phosphate (PO4) <5 ppm
<0.02 ppm Selenium (Se) Aluminium (Al) <0.1 ppm Potassium (K)
Aluminium (Al) <0.005 ppm Silver (Ag) <5 ppm Arsenic (As) <0.002 ppm Strontium (Sr)
Antimony (Sb) <0.005 ppm Sodium (Na) <0.05 ppm Barium (Ba) Thallium (Tl)
Arsenic (As) <0.005 ppm Strontium (Sr) <0.002 ppm Beryllium (Be) <0.2 ppm Titanium (Ti)
Barium (Ba) <0.002 ppm Thallium (Tl) <0.01 ppm Bismuth (Bi) <0.1 ppm Vanadium (V)
Beryllium (Be) Tin (Sn) <0.005 ppm Cadmium (Cd) <0.05 ppm Zinc (Zn)
Bismuth (Bi) <0.05 ppm Titanium (Ti) <0.0002% Calcium (Ca) <0.01 ppm Residue after ignition
Boron (B) <0.005 ppm Total chloride (Cl) Chloride (Cl) <0.02 ppm
Cadmium (Cd) <0.002 ppm Total nitrogen (N) Chromium (Cr) <0.05 ppm
Calcium (Ca) <0.005 ppm Total phosphorus (P) Cobalt (Co) <0.2 ppm
Chromium (Cr) <0.005 ppm Vanadium (V) Copper (Cu)
Cobalt (Co) <0.005 ppm Zinc (Zn) Germanium (Ge)
Copper (Cu) <0.005 ppm Zirconium (Zr) Iron (Fe)
Gallium (Ga) Residue after ignition
Germanium (Ge) <0.05 ppm Substances Lot analysis on the label
Indium (In) <0.002 ppm reducing KMnO4
Iron (Fe) <0.002 ppm <0.0001%
Lead (Pb)
Lithium (Li) <0.02 ppm
Magnesium (Mg) <0.002 ppm
Manganese (Mn)
Sulfuric acid min 95%
for electronic use (MOS)
packaging Cat. No Mfr. No
2.5 Ò HDPE Plastic bottle 1017-2350 S/9222/PB17
2.5 Ò Coated Glass bottle 1264-6777 S/9222/PC17
H2SO4 EINECS: 231-639-5
CAS: 7664-93-9 UN: 1830
MW: 98.07 GHS: Skin Corr. 1A, Eye Dam. 1
Density at 20°C: 1.84 H314
Boiling point: 290 °C P301+P330+P331,
Melting point: 10 °C P305+P351+P338, P280
ADR/RID: 8, II
Assay: >95%
337
S | Sulfuric acid min 95%
Sulfuric acid min 95% d=1.83 Certified AR Sulfuric acid min 95% d=1.83 SLR
for analysis specified reagents for general laboratory work- extra pure
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
S/9240/PB15 S/9160/PB15
1 Ò HDPE Plastic bottle 1029-4300 S/9240/PC15 1 Ò HDPE Plastic bottle 1075-4001 S/9160/PB17
1 Ò Coated Glass bottle 1265-6777 2.5 Ò HDPE Plastic bottle 1066-7422 S/9160/PB21
2.5 Ò Glass bottle 1148-2944 S/9240/17 5 Ò HDPE Plastic bottle 1263-6777
2.5 Ò HDPE Plastic bottle 1032-5960 S/9240/PB17 25 Ò HDPE Plastic container 1149-2944 S/9160/25
2.5 Ò Coated Glass bottle 1040-8463 S/9240/PC17 45 Ò Plastic container 1195-4091 S/9160/26
25 Ò HDPE Plastic container 1033-5960
45 Ò Plastic container 1143-3453 S/9240/25 H2SO4 EINECS: 231-639-5 <10 ppm
S/9240/26 CAS: 7664-93-9 UN: 1830 <50 ppm
H2SO4 EINECS: 231-639-5 MW: 98.07 GHS: Skin Corr. 1A, Eye Dam. 1 <0.005%
CAS: 7664-93-9 UN: 1830 <0.01 ppm Density at 20°C: 1.840 H314 <20 ppm
MW: 98.07 GHS: Skin Corr. 1A, Eye Dam. 1 <0.02 ppm Boiling point: 290 °C P301+P330+P331,
Density at 20°C: 1.84 H314 <0.05 ppm Melting point: 10 °C P305+P351+P338, P280 <2 ppm
Boiling point: 290 °C P301+P330+P331, <0.00002% ADR/RID: 8, II
Melting point: 10 °C P305+P351+P338, P280 SLR
ADR/RID: 8, II <0.5 ppm Assay: >95% Mfr. No
<0.5 ppm S/9360/PB17
Assay: >95% Guaranteed analysis <20 APHA Potassium (K)
<1 ppm <10 ppm Sodium (Na) Mfr. No
Guaranteed analysis <10 APHA Manganese (Mn) <0.02 ppm Color n-Butyl formate S/9120/PB17
<0.0005% Molybdenum (Mo) <0.02 ppm Calcium (Ca) <5 ppm Total nitrogen (N)
Color Nickel (Ni) <0.00002% Copper (Cu) <10 ppm Zinc (Zn)
Residue after ignition <0.0001% Nitrate (NO3) Iron (Fe)
Substances <0.05 ppm Potassium (K) <5 ppm Lead (Pb) <5 ppm
reducing KMnO4 <0.01 ppm Selenium (Se) <0.5 ppm Magnesium (Mg) <5 ppm
Aluminium (Al) <0.02 ppm Sodium (Na) <0.01 ppm
Arsenic (As) <0.01 ppm Strontium (Sr) <0.2 ppm Sulfuric acid 95% is equivalent to a strength of 18.0 M (36.80N).
Barium (Ba) Titanium (Ti) <0.05 ppm
Cadmium (Cd) <0.5 ppm Total chloride (Cl) Sulfuric acid min 95% d=1.83
Calcium (Ca) <0.1 ppm Total nitrogen (N) SLR
Chromium (Cr) <0.01 ppm Total silicon (Si) extra pure, for milk testing, (Gerber test)
Cobalt (Co) <0.05 ppm Vanadium (V) Mfr. No
Copper (Cu) <0.5 ppm Zinc (Zn) S/9200/PB08 packaging Cat. No
Iron (Fe) <0.02 ppm Propan--1-ol S/9200/PB17 2.5 Ò HDPE Plastic bottle 1042-7080
Lead (Pb) <0.01 ppm EINECS: 231-639-5
Lithium (Li) <0.2 ppm H2SO4 UN: 1830
Magnesium (Mg) CAS: 7664-93-9 GHS: Skin Corr. 1A, Eye Dam. 1
MW: 98.07 H314
Sulfuric acid 95% is equivalent to a strength of 18.0 M (36.80N). Density at 20°C: 1.840 P301+P330+P331,
Lot analysis on the label. Boiling point: 290 °C P305+P351+P338, P280
Melting point: 10 °C
Sulfuric acid min 95% d=1.83 ADR/RID: 8, II <20 APHA
extra pure , low in nitrogen Assay: 89.5 to 91%
packaging Cat. No Guaranteed analysis
Color
500 mÒ HDPE Plastic bottle 1076-4001
2.5 Ò HDPE Plastic bottle 1076-4191 Sulfuric acid min 95% d=1.83
H2SO4 EINECS: 231-639-5 Technical
CAS: 7664-93-9 UN: 1830
MW: 98.07 GHS: Skin Corr. 1A, Eye Dam. 1
Density at 20°C: 1.840 H314
Boiling point: 290 °C P301+P330+P331,
Melting point: 10 °C P305+P351+P338, P280
ADR/RID: 8, II
Assay: >95% packaging Cat. No
Guaranteed analysis 2.5 Ò HDPE Plastic bottle 1049-6880
Color <20 APHA Nitrate (NO3) <0.00002% H2SO4 EINECS: 231-639-5
Calcium (Ca) <10 ppm Potassium (K) <10 ppm CAS: 7664-93-9 UN: 1830
Copper (Cu) Sodium (Na) <50 ppm MW: 98.07 GHS: Skin Corr. 1A, Eye Dam. 1
Iron (Fe) <5 ppm n-Butyl formate <0.005% Density at 20°C: 1.840 H314
Lead (Pb) <10 ppm Total nitrogen (N) <2 ppm Boiling point: 290 °C P301+P330+P331,
Magnesium (Mg) Zinc (Zn) <2 ppm Melting point: 10 °C P305+P351+P338, P280
<5 ppm ADR/RID: 8, II
<5 ppm
Sulfuric acid 95% is equivalent to a strength of 18.0 M (36.80N). Assay: >95%
Sulfuric acid 95% is equivalent to a strength of 18.0 M (36.80N).
Sulfuric acid 50% w/v
pure, for formaldehyde determination
packaging Cat. No Mfr. No
S/8350/PB17
2.5 Ò HDPE Plastic bottle 1008-0400
Read more page 24
H2SO4 UN: 2796
338 CAS: 7664-93-9 GHS: Skin Corr. 1A
MW: 98.07 H314
Density at 20°C: 1.10 to 1.30 P301+P330+P331, P280,
ADR/RID: 8, II P305+P351+P338, P310
EINECS: 231-639-5
Sulfuric acid solution 0.1M (0.2N) | S
Sulfuric acid 25% w/v Sulfuric acid solution 1M (2N)
pure NIST Standard solution ready to use, For Volumetric analysis
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
H/0564/21
5 Ò HDPE Plastic bottle 1013-1810 1Ò HDPE Plastic bottle 1009-0250 J/8420/PB15
2.5 Ò HDPE Plastic bottle 1066-6072 J/8420/17
H2SO4 UN: 2796 10 Ò Bag in box 1149-8962 J/8420/24
CAS: 7664-93-9 GHS: Skin Corr. 1A 25 Ò HDPE Drum 1267-8635 J/8420/25
MW: 98.07 H314
Density at 20°C: 1.10 to1.30 P301+P330+P331, P280, CAS: 7664-93-9 UN: 2796
ADR/RID: 8, II P305+P351+P338, P310 Density at 20°C: 1.03 to 1.07 GHS: Skin Irrit. 2, Eye Irrit. 2
EINECS: 231-639-5 Boiling point: 100 °C H319, H315
ADR/RID: 8, II P305+P351+P338, P280
EINECS: 231-639-5
Manufactured to a tolerance of ± 0.1%.
See the full range of Standard Volumetric solution page 323.
Sulfuric acid Cat. No Mfr. No Sulfuric acid solution 0.5M (1N) Eur.Ph. , USP, BP
S/9500/PB17
packaging 1054-8260 NIST Standard solution ready to use, For Volumetric analysis
2.5 Ò HDPE Plastic bottle
H2SO4 UN: 2796 packaging Cat. No Mfr. No
CAS: 7664-93-9 GHS: Skin Corr. 1A
MW: 98.07 H314 1Ò HDPE Plastic bottle 1073-4761 J/8430/15
Density at 20°C: 1.10 to 1.30 P301+P330+P331, P280, 2.5 Ò HDPE Plastic bottle 1041-8030 J/8430/17
ADR/RID: 8, II P305+P351+P338, P310 10 Ò Bag in box 1052-9000 J/8430/24
EINECS: 231-639-5 25 Ò HDPE Drum 1268-8635 J/8430/25
Sulfuric acid fuming CAS: 7664-93-9 UN: 2796
Density at 20°C: 1.03 to 1.07 GHS: Skin Irrit. 2, Eye Irrit. 2
pure Boiling point: 100 °C H319, H315
ADR/RID: 8, II P305+P351+P338, P280
packaging EINECS: 231-639-5
500 mÒ Coated Glass bottle
Cat. No Mfr. No Manufactured to a tolerance of ± 0.1%.
H2SO4.SO3 S/9440/PB08 See the full range of Standard Volumetric solution page 323.
CAS: 8014-95-7 1022-2282
MW: 178.14 Sulfuric acid solution 0.25M (0.5N)
Density at 20°C: 1.92 UN: 1831
Boiling point: 138 °C GHS: Skin Corr. 1A, Eye Dam. 1 NIST Standard solution ready to use, For Volumetric analysis
Melting point: 2 °C H314, EUH014
ADR/RID: 8, 6.1, I P301+P330+P331, packaging Cat. No Mfr. No
P305+P351+P338, P310,
Assay: >104.5% P304+P340, P280, P402+P404 1 Ò HDPE Plastic bottle 1071-3611 J/8440/PB15
2.5 Ò HDPE Plastic bottle 1051-8810 J/8440/17
CAS: 7664-93-9 UN: 3264
Density at 20°C: 1.01 to 1.03 GHS: Met. Corr. 1
Boiling point: 100 °C H290
ADR/RID: 8, III P234, P390
EINECS: 231-639-5
Sulfuric acid solution 5M approx. (10N) Manufactured to a tolerance of ± 0.1%.
See the full range of Standard Volumetric solution page 323.
pure
packaging Cat. No Mfr. No Sulfuric acid solution 0.1M (0.2N)
1079-4371
1 Ò HDPE Plastic bottle 1049-7830 J/8400/PB15 NIST Standard solution ready to use, For Volumetric analysis
2.5 Ò HDPE Plastic bottle 1148-8962 J/8400/PB17
10 Ò HDPE Plastic container UN: 2796
GHS: Skin Corr. 1A J/8400/24
H2SO4 H314
CAS: 7664-93-9 P301+P330+P331, P280, packaging Cat. No Mfr. No
MW: 98.07 P305+P351+P338, P310
Density at 20°C: 1.10 to1.30 1Ò HDPE Plastic bottle 1072-3611 J/8450/15
ADR/RID: 8, II 5.3 M 2.5 Ò HDPE Plastic bottle 1019-2000 J/8450/17
EINECS: 231-639-5 10 Ò Bag in box 1027-4100 J/8450/24
25 Ò HDPE Drum 1264-6727 J/8450/25
Guaranteed analysis
CAS: 7664-93-9 UN: 3264
Molarity Density at 20°C: 1.01 to 1.03 GHS: Met. Corr. 1
Boiling point: 100 °C H290
ADR/RID: 8, III P234, P390
EINECS: 231-639-5
Sulfuric acid solution 2M (4N) Manufactured to a tolerance of ± 0.1%.
See the full range of Standard Volumetric solution page 323.
pure, Bench Reagent
packaging Cat. No Mfr. No
J/8410/PB15
1 Ò HDPE Plastic bottle 1055-8620
2.5 Ò HDPE Plastic bottle 1073-4571 J/8410/17
10 Ò Bag in box 1147-8962 J/8410/24
H2SO4 UN: 2796 See page 308 for more information
CAS: 7664-93-9 GHS: Skin Corr. 1A
MW: 98.07 H314
Density at 20°C: 1.10 to1.30 P301+P330+P331, P280,
ADR/RID: 8, II P305+P351+P338, P310
EINECS: 231-639-5
339
S | Sulfuric acid solution 0.05M (0.1N)
Sulfuric acid solution 0.05M (0.1N) Eur.Ph. , BP Sulfuryl chloride
NIST Standard solution ready to use, For Volumetric analysis Technical
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
S/9560/PB08
1Ò HDPE Plastic bottle 1035-5710 J/8460/15 500 mÒ Coated Glass bottle 1027-4350
2.5 Ò HDPE Plastic bottle 1015-2050 J/8460/17
10 Ò Bag in box 1024-4150 J/8460/24 SO2Cl2 EINECS: 232-245-6
25 Ò HDPE Drum 1265-6727 J/8460/25 CAS: 7791-25-5 UN: 1834
MW: 134.97 GHS: Skin Corr. 1B, STOT SE 3
CAS: 7664-93-9 UN: 3264 Density at 20°C: 1.667 H335, H314, EUH014
Density at 20°C: 1.01 to 1.03 GHS: Met. Corr. 1 Boiling point: 69.1 °C P280, P305+P351+P338,
Boiling point: 100 °C H290 Melting point: -54.1 °C P304+P312, P260
ADR/RID: 8, III P234, P390 ADR/RID: 6.1, 8, I
EINECS: 231-639-5
Manufactured to a tolerance of ± 0.1%. Talc fine powder
See the full range of Standard Volumetric solution page 323.
pure
Sulfuric acid solution 0.05M (0.1N) packaging Cat. No Mfr. No
1 kg Plastic jar 1025-4350
NIST Standard Concentrate, For Volumetric analysis 2.5 kg Plastic jar 1043-7270 T/0050/60
10 kg Plastic keg 1197-4061 T/0050/62
packaging Cat. No Mfr. No Density at 20°C: 2.5 to 2.8 T/0050/68
4MgO4SiO2.H2O Melting point: 800 °C
1 Ampoule 1032-5760 J/8460C/05 CAS: 14807-96-6 EINECS: 238-877-9
J/8460C/90 MW: 379.28
6 Ampoule 1052-8620 : Pass
Guaranteed analysis
CAS: 7664-93-9 UN: 2796 Identity test
Density at 20°C: 1.03 to 1.07 GHS: Skin Irrit. 2, Eye Irrit. 2
ADR/RID: 8, II H319, H315
EINECS: 231-639-5 P305+P351+P338, P280
Each ampoule makes 1 Ò of solution. Talc fine powder purified by acids
See the full range of Standard Volumetric solution page 323.
pure
Sulfuric acid solution 0.01M (0.2N) packaging Cat. No Mfr. No
500 g Plastic jar 1068-7612 T/0100/53
NIST Standard solution ready to use, For Volumetric analysis 6MgO4SiO2.H2O Density at 20°C: 2.5 to 2.8
CAS: 14807-96-6 Melting point: 800 °C
packaging Cat. No Mfr. No MW: 379.28 EINECS: 238-877-9
1Ò HDPE Plastic bottle 1025-4150 J/8470/PB15 Guaranteed analysis : Pass
2.5 Ò HDPE Plastic bottle 1053-8620 J/8470/17 Identity test
10 Ò Bag in box 1063-4922 J/8470/24
CAS: 7664-93-9 Tannic acid SLR
Density at 20°C: 1.00 Mfr. No
Boiling point: 100 °C specified reagents for general laboratory work- extra pure T/0150/53
EINECS: 231-639-5
<0.2%
Manufactured to a tolerance of ± 0.3%.
See the full range of Standard Volumetric solution page 323.
Sulfuric acid solution 0.5M (1N) packaging Cat. No
500 g Plastic jar 1012-2450
NIST Standard Concentrate, For Volumetric analysis C76H52O46 Melting point: 218 °C
CAS: 1401-55-4 Flash point: 198 °C
packaging Cat. No Mfr. No MW: 170.22 EINECS: 215-753-2
J/8430C/05 Guaranteed analysis <9% Residue after ignition
J/8430C/90 Loss on drying
1 Ampoule 1019-1570
6 Ampoule 1042-8030
CAS: 7664-93-9 GHS: Skin Corr. 1A (+)-Tartaric acid Certified AR, Eur.Ph.
Density at 20°C: 1.10 to 1.30 H314
ADR/RID: 8, II P301+P330+P331, P280, for analysis
EINECS: 231-639-5 P305+P351+P338, P310
UN: 2796 packaging
Cat. No Mfr. No
Each ampoule makes 1 Ò of solution. 500 g Plastic jar
See the full range of Standard Volumetric solution page 323. 1 kg Plastic jar 1006-0400 T/0250/53
1061-4742 T/0250/60
C4H6O6
Sulfurous Acid CAS: 87-69-4 EINECS: 201-766-0
MW: 150.09 GHS: Skin Irrit. 2, Eye Irrit. 2,
pure, approx.6% w/v SO2 Density at 20°C: 1.76 STOT SE 3
Melting point: 168 to 172 °C H335, H315, H319
packaging Flash point: 210 °C P280, P305+P351+P338,
2.5 Ò Glass bottle P310, P302+P352, P261
Assay: >99.5%
H2SO3 Cat. No Mfr. No <20 ppm Sodium (Na) <50 ppm
CAS: 7782-99-2 J/8500/17 Guaranteed analysis <2 ppm Total chloride (Cl) <0.0005%
MW: 82.07 1039-5800 Calcium (Ca) <2 ppm Total phosphorus (P)
ADR/RID: 8, II Copper (Cu) <2 ppm Total silicon (Si) <20 ppm
EINECS: 231-973-1 GHS: Acute Tox. 4, Skin Corr. 1B Iron (Fe) Total sulphur (S) <20 ppm
UN: 1833 H332, H314 Lead (Pb) <10 ppm Zinc (Zn) <100 ppm
P280, P301+P330+P331, Magnesium (Mg) <0.01% <10 ppm
P305+P351+P338, P310, Oxalate (C2O4)
P302+P352, P304+P340 Potassium (K) <20 ppm
340
Sodium tartrate dihydrate | T
Typical analysis <2 ppm Molybdenum (Mo) <2 ppm (+)-Tartaric acid SLR
<2 ppm Nickel (Ni) <2 ppm
Arsenic (As) <2 ppm Silver (Ag) <2 ppm extra pure, powder Mfr. No
Barium (Ba) <2 ppm Strontium (Sr) <2 ppm T/0210/53
Cadmium (Cd) <2 ppm Titanium (Ti) <2 ppm packaging Cat. No T/0210/60
Chromium (Cr) <2 ppm Vanadium (V) <2 ppm T/0210/65
Cobalt (Co) <2 ppm 500 g Plastic jar 1000-0420
Lithium (Li) SLR 1 kg Plastic jar 1078-4191 <200 ppm
Manganese (Mn) 5 kg Plastic keg 1030-6060 <0.002%
Mfr. No <50 ppm
Lot analysis on the label. T/0200/50 C4H6O6 EINECS: 201-766-0
T/0200/53 CAS: 87-69-4 GHS: Skin Irrit. 2, Eye Irrit. 2, <100 ppm
(+)-Tartaric acid T/0200/60 MW: 150.09 STOT SE 3 <500 ppm
Density at 20°C: 1.76 C H335, H315, H319
extra pure, crystals Melting point: 168 to 172 °C P280, P305+P351+P338, <50 ppm
Flash point: 210 °C P310, P302+P352, P261
Assay: >99%
packaging Cat. No Guaranteed analysis <100 ppm Sodium (Na)
<10 ppm n-Butyl formate
250 g Plastic jar 1148-3653 Calcium (Ca) <10 ppm Total phosphorus (P)
500 g Plastic jar 1030-6010 Copper (Cu) <10 ppm Total silicon (Si)
1 kg Plastic jar 1031-6010 Iron (Fe) <10 ppm Total sulphur (S)
Lead (Pb) Zinc (Zn)
C4H6O6 EINECS: 201-766-0 Magnesium (Mg) <100 ppm
CAS: 87-69-4 GHS: Skin Irrit. 2, Eye Irrit. 2, Potassium (K)
MW: 150.09 STOT SE 3
Density at 20°C: 1.76 C H335, H315, H319 (+)-Tartaric acid diammonium salt SLR
Melting point: 168 to 172 °C P280, P305+P351+P338,
Flash point: 210 °C P310, P302+P352, P261 specified reagents for general laboratory work- extra pure Mfr. No
A/6590/53
Assay: >99%
<100 ppm
Guaranteed analysis <100 ppm Sodium (Na) <200 ppm packaging Cat. No <100 ppm
<10 ppm n-Butyl formate <0.002%
Calcium (Ca) <10 ppm Total phosphorus (P) <50 ppm 500 g Plastic jar 1075-6281 <0.005%
Copper (Cu) <10 ppm Total silicon (Si) <50 ppm
Iron (Fe) <10 ppm Total sulphur (S) <100 ppm (NH4)2C4H4O6 Density at 20°C: 1.6
Lead (Pb) Zinc (Zn) <500 ppm CAS: 3164-29-2 EINECS: 221-618-9
Magnesium (Mg) <100 ppm MW: 184.15
Potassium (K) <50 ppm
Assay: >98%
Tantalum standard metal solution 1000 ppm <50 ppm Potassium (K)
Guaranteed analysis <50 ppm Sodium (Na)
Calcium (Ca) <50 ppm n-Butyl formate
Copper (Cu) <50 ppm Zinc (Zn)
Iron (Fe) <100 ppm
for ICP solution in H2O/HF trace, NIST certified Lead (Pb)
Magnesium (Mg)
packaging Cat. No Mfr. No Sodium tartrate dihydrate Certified AR
100 mÒ Plastic bottle 1190-3733 SPPLTA92Y for analysis
500 mÒ Plastic bottle 1199-3723 SPPLTA92X
H319
Manufactured to a tolerance of ± 0.5%. packaging Cat. No Mfr. No
All standards are manufactured from acids, metals & metal salts and contain less 1062-4932 S/6922/53
than <10 ppm total metal impurites. 500 g Plastic jar
See also the full range in the Standard Elemental solution for Trace metal analysis <5 ppm
section see page 314. C4H4Na2O6.2H2O <5 ppm
Check with your local distributor for availability of Spex product CAS: 6106-24-7 <20 ppm
MW: 230.08 <5 ppm
Tantalum standard metal solution 10 000 ppm EINECS: 212-773-2 7.5 to 8.5 Molybdenum (Mo) <5 ppm
<5 ppm Nickel (Ni) <5 ppm
for ICP solution in H2O/HF trace, NIST certified Assay: 99 to 101% <5 ppm Potassium (K) <0.0005%
<5 ppm Propan--1-ol <20 ppm
packaging Cat. No Mfr. No Guaranteed analysis <5 ppm Strontium (Sr) <50 ppm
100 mÒ Plastic bottle Titanium (Ti) <20 ppm
500 mÒ Plastic bottle 1192-3733 SPPLTA93Y pH (aqueous solution 5%) <50 ppm n-Butyl formate <50 ppm
1191-3733 SPPLTA93X Aluminium (Al) <5 ppm Total nitrogen (N) <5 ppm
H319 Arsenic (As) <5 ppm Total phosphorus (P) <10 ppm
Barium (Ba) <5 ppm Total silicon (Si)
Manufactured to a tolerance of ± 0.5%. Cadmium (Cd) <5 ppm Total sulphur (S)
All standards are manufactured from acids, metals & metal salts and contain less Calcium (Ca) <5 ppm Vanadium (V)
than <10 ppm total metal impurites. Chromium (Cr) <5 ppm Zinc (Zn)
See also the full range in the Standard Elemental solution for Trace metal analysis Cobalt (Co)
section see page 314. Copper (Cu) <20 ppm
Check with your local distributor for availability of Spex product Iron (Fe) <5 ppm
Lead (Pb)
Lithium (Li)
Magnesium (Mg)
Manganese (Mn)
Lot analysis on the label.
Tap, nickel plated brass for 25L metal drum
3/4" BSP, nickel plated brasss body, chrome ball valve PTFE seat
packaging Cat. No Mfr. No
Pack Box 1019-2780 TAP-105-K
341
T | Sodium tartrate dihydrate
Sodium tartrate dihydrate SLR Tellurium standard metal solution 1000 ppm
specified reagents for general laboratory work- extra pure Mfr. No for ICP solution in HNO3 5%, NIST certified
S/6920/53
packaging Cat. No packaging Cat. No Mfr. No
1053-8450 100 mÒ Plastic bottle
500 g Plastic jar 500 mÒ Plastic bottle 1198-3733 SPPLTE22Y
1197-3733 SPPLTE22X
C4H4Na2O6.2H2O H314
CAS: 6106-24-7
MW: 230.08 <200 ppm n-Butyl formate <0.005% Manufactured to a tolerance of ± 0.5%.
EINECS: 212-773-2 <20 ppm Total phosphorus (P) <200 ppm All standards are manufactured from acids, metals & metal salts and contain less
<20 ppm Total silicon (Si) <100 ppm than <10 ppm total metal impurites.
Assay: >99% <20 ppm Total sulphur (S) <200 ppm See also the full range in the Standard Elemental solution for Trace metal analysis
Zinc (Zn) section see page 314.
Guaranteed analysis <100 ppm <50 ppm Check with your local distributor for availability of Spex product
<100 ppm
Calcium (Ca)
Copper (Cu)
Iron (Fe)
Lead (Pb)
Magnesium (Mg)
Potassium (K)
Tellurium standard metal solution 1000 ppm
for ICP solution in HCL 10%, NIST certified
Tartaric acid monopotassium salt packaging Cat. No Mfr. No
500 mÒ Plastic bottle 1146-8869 PLTE32X
See Potassium hydrogen tartrate, page 255 H315, H319, H335
Taurine Manufactured to a tolerance of ± 0.5%.
All standards are manufactured from acids, metals & metal salts and contain less
pure than <10 ppm total metal impurites.
See also the full range in the Standard Elemental solution for Trace metal analysis
packaging section see page 314.
500 g Plastic jar Check with your local distributor for availability of Spex product
C2H7NO3S
CAS: 107-35-7 Cat. No Mfr. No
MW: 125.15 T/0300/53
Melting point: 300 °C 1061-4932
EINECS: 203-483-8 Tellurium standard metal solution 10 000 ppm
GHS: Skin Irrit. 2, Eye Irrit. 2,
Assay: >99% STOT SE 3 for ICP solution in HCL 40%, NIST certified
H319, H335, H315
P261, P302+P352, P280,
P305+P351+P338
packaging Cat. No Mfr. No
500 mÒ Plastic bottle 1147-8869 PLTE53X
H314, H335
Tellurium standard metal solution 1000 ppm
for AAS, solution HCl 20%
packaging Cat. No Mfr. No Manufactured to a tolerance of ± 0.5%.
All standards are manufactured from acids, metals & metal salts and contain less
100 mÒ HDPE Plastic bottle 1056-9652 J/8100/05 than <10 ppm total metal impurites.
500 mÒ HDPE Plastic bottle 1040-9180 J/8100/08 See also the full range in the Standard Elemental solution for Trace metal analysis
section see page 314.
Density at 20°C: 1.03 STOT SE 3 Check with your local distributor for availability of Spex product
ADR/RID: 8, III H319, H335, H315
UN: 3264 P280, P305+P351+P338 TEMED
GHS: Skin Irrit. 2, Eye Irrit. 2,
technical 99+%, (N,N,N’,N’-Tetramethylethylenediamine)
Manufactured to a tolerance of ± 0.5%.
See also the full range in the Standard Elemental solution for Trace metal analysis
section see page 314.
Tellurium standard metal solution 1000 ppm packaging Cat. No Mfr. No
for ICP, solution HCl 20% 25 mÒ Glass bottle 1054-9960 T/P190/04
2.5 Ò Glass bottle 1269-6787 T/P190/17
packaging Cat. No Mfr. No C6H16N2 EINECS: 203-744-6
CAS: 110-18-9 UN: 2372
500 mÒ HDPE Plastic bottle 1062-5692 J/8327/08 MW: 116.21 GHS: Flam. Liq. 2, Acute
Density at 20°C: 0.770 Tox. 4, Skin Corr. 1B, Eye Dam. 1
Density at 20°C: 1.03 STOT SE 3 Boiling point: 120 to 122 °C H225, H314, H302, H332
ADR/RID: 8, III H319, H335, H315 Melting point: -55 °C P301+P330+P331, P280,
UN: 3264 P280, P305+P351+P338 Flash point: 17 °C P305+P351+P338, P310,
GHS: Skin Irrit. 2, Eye Irrit. 2, ADR/RID: 3, II P304+P340, P210, P240
Manufactured to a tolerance of ± 0.5%. Assay (CG): >99%
All standards are manufactured from acids, metals & metal salts and contain less
than <10 ppm total metal impurites. This accelerator, used in the polymerisation of acrylamide gels, enhances the forma-
See also the full range in the Standard Elemental solution for Trace metal analysis tion of oxygen radicals and counters the inhibitory effect of excess ammonium per-
section see page 314. sulfate.
342
Tetra-n-butyl ammonium hydroxide | T
Terbium standard metal solution 1000 ppm Tetrabutyl ammonium bromide Certified
for ICP solution in HNO3 2%, NIST certified for HPLC Mfr. No
T/0476/46
packaging Cat. No Mfr. No packaging Cat. No
100 mÒ Plastic bottle
500 mÒ Plastic bottle 1194-3733 SPPLTB22Y 25 g Plastic jar 1021-4500
1193-3733 SPPLTB22X
H315, H319 C16H36BrN GHS: Skin Irrit. 2, Eye Irrit. 2,
CAS: 1643-19-2 STOT SE 3
Manufactured to a tolerance of ± 0.5%. MW: 322.36 H315, H335, H319
All standards are manufactured from acids, metals & metal salts and contain less Density at 20°C: 1.15 P261, P302+P352, P280,
than <10 ppm total metal impurites. Melting point: 100 to 104 °C P305+P351+P338
See also the full range in the Standard Elemental solution for Trace metal analysis EINECS: 216-699-2
section see page 314.
Check with your local distributor for availability of Spex product Assay: >98%
Absorbance specification
Max. Absorbance (1cm cell v HPLC water)
254 nm (sol. aqu. 0.1 M) : <0.05 A.U.
Lot analysis on the label.
Filtered to 0.2 µm.
Terbium standard metal solution 10 000 ppm
for ICP solution in HNO3 5%, NIST certified
packaging Cat. No Mfr. No Tetrabutylammonium dihydrogen phosphate
PLTB23Y
100 mÒ Plastic bottle 1143-8869
500 mÒ Plastic bottle 1142-8869 PLTB23X See Tetrabutyl ammonium phosphate, page 344
H314
Manufactured to a tolerance of ± 0.5%. Tetrabutylammonium hydrogen sulfate SLR
All standards are manufactured from acids, metals & metal salts and contain less
than <10 ppm total metal impurites. specified reagents for general laboratory work- extra pure Mfr. No
See also the full range in the Standard Elemental solution for Trace metal analysis T/0479/46
section see page 314. packaging Cat. No T/0479/48
Check with your local distributor for availability of Spex product
25 g Plastic jar 1052-8640
Terbium standard metal solution 10 ppm 100 g Plastic jar 1001-0430
for ICP-MS solution in HNO3 2%, NIST certified C16H37NSO4 2, Eye Irrit. 2, STOT SE 3
CAS: 32503-27-8 H315, H319, H335, H302
packaging Cat. No Mfr. No MW: 339.52 P261, P301+P312,
100 mÒ Plastic bottle 1142-6008 SPCLTB21AY Melting point: 168 to 172 °C P302+P352, P280,
EINECS: 251-068-5 P305+P351+P338
GHS: Acute Tox. 4, Skin Irrit.
H315, H320
Manufactured to a tolerance of ± 0.5%. Tetra-n-butyl ammonium hydroxide Certified
All standards are manufactured from acids, metals & metal salts and contain less Mfr. No
than <10 ppm total metal impurites. for HPLC, solution 0.1M ( phosphate buffered)
See also the full range in the Standard Elemental solution for Trace metal analysis T/0486/07
section see page 314. packaging Cat. No
Check with your local distributor for availability of Spex product 250 mÒ HDPE Plastic bottle 1026-4590 : 0.995 to 1.005
Terpineol CAS: 2052-49-5 H315, H319
EINECS: 218-147-6 P280, P302+P352,
pure, Mixed Isomers GHS: Skin Irrit. 2, Eye Irrit. 2 P305+P351+P338
packaging Guaranteed analysis : 7 to 7.5 Factor
500 mÒ Glass bottle pH at 20°C
C10H18O
CAS: 8000-41-7 Cat. No Mfr. No Absorbance specification
MW: 154.25 T/0420/08 Max. Absorbance (1cm cell v HPLC water)
Density at 20°C: 0.925 to 0.935 1010-2500
254 nm (sol. aqu. 0.005 M) : <0.02 A.U.
Boiling point: 214 to 224 °C
Melting point: 31 to 35 °C Filtered to 0.2 µm.
Flash point: 89.4 °C
EINECS: 232-268-1
Tetrabromo (R) fluorescein C.I. 45380 Tetra-n-butyl ammonium hydroxide Certified
pure for HPLC, solution 0.5M
packaging Cat. No Mfr. No
packaging Cat. No Mfr. No 250 mÒ HDPE Plastic bottle 1036-6150 T/0481/07
10 g Glass jar 1072-4581 T/0470/45 CAS: 2052-49-5 GHS: Skin Corr. 1A, Eye Dam. 1
50 g Glass jar 1146-3733 T/0470/47 Flash point: >110 °C H314
ADR/RID: 8, II P301+P330+P331, P280,
C20H6Br4Na2O5 EINECS: 241-409-6 EINECS: 218-147-6 P305+P351+P338, P310
CAS: 17372-87-1 GHS: Eye Irrit. 2 UN: 1760
MW: 691.85 H319
Density at 20°C: 1.018 P280, P305+P351+P338 Guaranteed analysis
Melting point: 300 °C
pH at 20°C : 7 to 7.5 Factor : 0.995 to 1.005
Guaranteed analysis Manufactured to a tolerance of ± 0.2%.
Complies with standard IR spectrum: Pass Filtered to 0.2 µm.
343
T | Tetra-n-butyl ammonium hydroxide solution
Tetra-n-butyl ammonium hydroxide solution SLR Tetrachloroethylene Certified
specified reagents for general laboratory work- extra pure for UV spectroscopy
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
100 mÒ HDPE Plastic bottle 1048-7650 T/0605/PB17
250 mÒ HDPE Plastic bottle 1035-6150 T/0480/05 2.5 Ò Coated Glass bottle 1030-5820
UN: 3267 T/0480/07
C16H37NO GHS: Skin Corr. 1A, Eye Dam. 1 C2Cl4 ADR/RID: 6.1, III
CAS: 2052-49-5 H314 CAS: 127-18-4 EINECS: 204-825-9
MW: 259.46 P280, P301+P330+P331, MW: 165.83 UN: 1897
Density at 20°C: 0.995 P310, P305+P351+P338, Density at 20°C: 1.625 GHS: Carc. 2, Aquatic Chronic 2
Boiling point: >100 °C P303+P361+P353 Boiling point: 120 to 122 °C H351, H411
ADR/RID: 8, II Melting point: -22 °C P281, P273, P260
EINECS: 218-147-6 <0.05% Bromide (Br)
: <0.1% Sulfate (SO4) Assay (CG): >99.9%
Assay: 39.5 to 41%
Guaranteed analysis <0.00006 meq/g Residue after evaporation <5 ppm
Guaranteed analysis
<0.1% Alkalinity <0.01% Acidity <0.0003 meq/g
Residue after ignition <0.02% Water
Bromide
Absorbance specification
Max. Absorbance (1cm cell v HPLC water)
290 nm (sol. aqu. 1%) : <0.125 A.U. 340 nm <0.05 A.U.
310 nm <0.08 A.U. 360 nm <0.05 A.U.
320 nm <0.05 A.U. 400 nm <0.01 A.U.
Tetra-n-butyl ammonium hydroxide solution 0.1 M Tetrachloroethylene Certified AR
(0.1N) in toluene/methanol
for analysis
Standard solution ready to use, For volumetric analysis
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
500 mÒ Glass bottle 1058-8050 J/8750/08 2.5 Ò Glass bottle 1056-9390 T/0601/17
1 Ò Glass bottle 1030-5810 J/8750/15 2.5 Ò Coated Glass bottle 1019-2300 T/0601/PB17
2.5 Ò Glass bottle 1015-2100 J/8750/17 25 Ò Metal drum 1265-8655
10 Ò Bag in box 1140-8972 J/8750/24 T/0601/25
ADR/RID: 6.1, III
CAS: 2052-49-5 Eye Irrit. 2, STOT SE 1, STOT C2Cl4 EINECS: 204-825-9
Density at 20°C: 0.850 RE 2, Asp. Tox. 1 CAS: 127-18-4 UN: 1897
Flash point: 4 °C H225, H331, H311, H301, MW: 165.83 GHS: Carc. 2, Aquatic Chronic 2
ADR/RID: 3, 6.1, II H370, H361d, H304, H373, Density at 20°C: 1.625 H351, H411
EINECS: 218-147-6 H315, H319, H336 Boiling point: 120 to 122 °C P281, P273, P260
UN: 1992 P301+P330+P331, P280, Melting point: -22 °C
GHS: Flam. Liq. 2, Repr. 2, P305+P351+P338, P310,
Acute Tox. 3, Skin Irrit. 2, P210, P240 Assay (CG): >99.5%
Guaranteed analysis
Manufactured to a tolerance of 5%. Acidity / Alkalinity <0.0003 meq/g Iron (Fe) <0.1 ppm
See the full range of Standard Volumetric solution page 323. Lead (Pb) <0.05 ppm
Color <10 APHA Magnesium (Mg)
Potassium (K) <0.2 ppm
Water <0.01% Sodium (Na) <0.5 ppm
Total phosphorus (P) <0.5 ppm
Residue after evaporation <20 ppm Total sulphur (S) <0.1 ppm
Zinc (Zn) <0.5 ppm
Calcium (Ca) <0.5 ppm Acetone <0.1 ppm
Chloride (Cl) <0.0001% Molybdenum (Mo) <0.02%
Nickel (Ni)
Chlorine <0.3 ppm Strontium (Sr) <0.02 ppm
Titanium (Ti) <0.02 ppm
Tetra-n-butylammonium iodide SLR Free Chlorine (Cl2) <0.3 ppm Total silicon (Si) <0.02 ppm
Copper (Cu) <0.05 ppm Vanadium (V) <0.02 ppm
specified reagents for general laboratory work- extra pure Mfr. No <0.02 ppm
T/0490/48 Typical analysis <0.02 ppm <0.02 ppm
packaging Cat. No <0.02 ppm
100 g Plastic jar 1032-6200 Aluminium (Al) <0.02 ppm
C16H36IN GHS: Acute Tox. 4, Skin Irrit. Barium (Ba) <0.02 ppm
CAS: 311-28-4 2, Eye Irrit. 2, STOT SE 3 Cadmium (Cd) <0.02 ppm
MW: 369.38 H302, H335, H315, H319 Chromium (Cr) <0.02 ppm
Melting point: 141 to 150 °C P261, P302+P352, P280, Cobalt (Co) <0.02 ppm
EINECS: 206-220-5 P305+P351+P338 Lithium (Li)
Manganese (Mn)
Assay: >98% <0.05%
Lot analysis on the label.
Guaranteed analysis
Residue after ignition
Tetrachloroethylene SLR
specified reagents for general laboratory work- extra pure
packaging Cat. No Mfr. No
Tetrabutyl ammonium phosphate SLR 2.5 Ò Glass bottle 1058-9200 T/0600/17
T/0600/PB17
specified reagents for general laboratory work- extra pure Mfr. No 2.5 Ò Coated Glass bottle 1022-4210
T/0505/44 T/0600/21
5 Ò Fluorinated HDPE Plastic bottle 1023-4210 T/0600/25
packaging Cat. No 25 Ò Metal drum 1002-0370
5 g Glass jar 1063-5122 C2Cl4 ADR/RID: 6.1, III
CAS: 127-18-4 EINECS: 204-825-9
C16H38NPO4 GHS: Skin Irrit. 2, Eye Irrit. 2 MW: 165.83 UN: 1897
CAS: 5574-97-0 H319, H315 Density at 20°C: 1.625 GHS: Carc. 2, Aquatic Chronic 2
MW: 339.45 P302+P352, P280, Boiling point: 120 to 122 °C H351, H411
Melting point: 148 to 151 °C P305+P351+P338 Melting point: -22 °C P281, P273, P260
EINECS: 226-947-1
Assay (CG): >99%
Assay: >97%
344
Tetrahydrofuran stabilised | T
Guaranteed analysis Tetraethylammonium bromide SLR
Acidity / Alkalinity <0.003 meq/g Magnesium (Mg) <2 ppm specified reagents for general laboratory work- extra pure Mfr. No
Potassium (K) <2 ppm T/0620/48
Color <10 APHA Sodium (Na) <5 ppm
Total phosphorus (P) <2 ppm
Water <0.1% Total silicon (Si) <2 ppm packaging Cat. No
Total sulphur (S) <2 ppm
Residue after evaporation <50 ppm Zinc (Zn) <2 ppm 100 g Plastic jar 1000-0360
Calcium (Ca) <5 ppm C8H20NBr GHS: Skin Irrit. 2, Eye Irrit. 2,
CAS: 71-91-0 STOT SE 3
Copper (Cu) <2 ppm MW: 210.16 H315, H335, H319
Melting point: 285 °C P261, P302+P352, P280,
Iron (Fe) <5 ppm EINECS: 200-769-4 P305+P351+P338
Lead (Pb) <2 ppm Assay: >98%
Tetrachloroethylene Cat. No Mfr. No Tetrahydrofuran unstabilised Certified
T/0550/17
Technical 1004-0440 T/0550/PB17 For HPLC Mfr. No
1027-4590 T/0550/25 T/0706/PB15
packaging 1032-5770 packaging Cat. No T/0706/PB17
2.5 Ò Glass bottle Certified T/0706/10RSS
2.5 Ò Coated Glass bottle ADR/RID: 6.1, III Mfr. No 1 Ò Coated Glass bottle 1026-4350 T/0706/25RSS
25 Ò Metal drum EINECS: 204-825-9 2.5 Ò Coated Glass bottle 1057-8070 T/0706/30RSS
UN: 1897 T/0611/46 10 Ò Returnable Drum 1266-6777
C2Cl4 GHS: Carc. 2, Aquatic Chronic 2 25 Ò Returnable Drum 1268-6777 <0.0002 meq/g
CAS: 127-18-4 H351, H411 30 Ò Returnable Drum 1260-6787 <0.01%
MW: 165.83 P281, P273, P260
Density at 20°C: 1.625 C4H8O EINECS: 203-726-8 <0.04 A.U.
Boiling point: 120 to 122 °C CAS: 109-99-9 UN: 2056 <0.02 A.U.
Melting point: -22 °C MW: 72.11 GHS: Flam. Liq. 2, Eye Irrit.
Density at 20°C: 0.880 2, STOT SE 3 : >0 nM
Tetrachlorosilane See Silicon tetrachloride, page 276 Boiling point: 66 °C H225, H319, H335, EUH019
Melting point: -108.4 °C P261, P233, P280,
Flash point: -21 °C P305+P351+P338, P210, P240
ADR/RID: 3, II
Tetradecyltrimethylammonium bromide Assay (CG): >99.8%
for HPLC Guaranteed analysis
Alkalinity <0.0006 meq/g Acidity
Peroxide
packaging Cat. No Water <0.03%
25 g Plastic jar 1074-3811 Residue after evaporation <2 ppm
C17H38NBr UN: 1759 Absorbance specification
CAS: 1119-97-7 GHS: Skin Corr. 1B, Eye Dam. 1 Max. Absorbance (1cm cell v HPLC water)
MW: 336.39 H314
Melting point: 245 to 250 °C P301+P330+P331, P280, 230 nm <0.5 A.U. 270 nm
ADR/RID: 6.1, II P305+P351+P338, P310 240 nm <0.26 A.U. 280 nm
EINECS: 214-291-9 250 nm Wavelength at 1 A.U.
260 nm <0.1 A.U.
<0.05 A.U.
Assay: >98%
Absorbance specification Tetrahydrofuran stabilised with 0.025% BHT
Max. Absorbance (1cm cell v HPLC water)
for Gel Permeation Chromatography (GPC)
254 nm <0.05 A.U.
Lot analysis on the label. packaging Cat. No Mfr. No
Filtered to 0.2 µm. 1066-7612 T/0709/PB17
2.5 Ò Coated Glass bottle UN: 2056
Tetraethylammonium bromide Certified GHS: Flam. Liq. 2, Eye Irrit. <20 ppm
C4H8O 2, STOT SE 3 <20%
for HPLC Mfr. No CAS: 109-99-9 H225, H335, H319, EUH019
T/0621/46 MW: 72.11 P310, P304+P340, P261,
packaging Cat. No Density at 20°C: 0.880 P273, P233, P302+P352,
Boiling point: 66 °C P280, P305+P351+P338,
25 g Plastic jar 1074-4001 Melting point: -108.4 °C P210, P240
Flash point: -21 °C
C8H20NBr GHS: Skin Irrit. 2, Eye Irrit. 2, ADR/RID: 3, II <10 APHA Residue after evaporation
CAS: 71-91-0 STOT SE 3 EINECS: 203-726-8 <0.03% Residue after ignition
MW: 210.16 H315, H335, H319
Melting point: 285 °C P261, P302+P352, P280, Guaranteed analysis
EINECS: 200-769-4 P305+P351+P338
Color
Assay: >98% Water
Stabilised with 0.025% BHT.
Absorbance specification
Max. Absorbance (1cm cell v HPLC water)
254 nm (sol. aqu. 0.1 M) : <0.05 A.U.
Lot analysis on the label.
Filtered to 0.2 µm.
345
T | Tetrahydrofuran unstabilised
Tetrahydrofuran unstabilised Tetrahydrofuran stabilised with 0.025% BHT SLR
extra dry, for synthesis specified reagents for general laboratory work- extra pure
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
T/0702/PB15 T/0700/08
1 Ò Coated Glass bottle 1036-5910 T/0702/PB17 500 mÒ Glass bottle 1055-9580 T/0700/17
2.5 Ò Coated Glass bottle 1034-5960 2.5 Ò Glass bottle 1038-5860 T/0700/PB17
<2 ppm 2.5 Ò Coated Glass bottle 1004-0380 T/0700/21
C4H8O EINECS: 203-726-8 5 Ò HDPE Plastic bottle 1052-9960 T/0700/PC21
CAS: 109-99-9 UN: 2056 5 Ò HDPE Plastic bottle 1055-0831 T/0700/25
MW: 72.11 GHS: Flam. Liq. 2, Eye Irrit. 25 Ò Metal drum 1015-2350 T/0700/27
Density at 20°C: 0.880 2, STOT SE 3 200 Ò Metal drum 1018-2172
Boiling point: 66 °C H225, H319, H335, EUH019 <2 ppm
Melting point: -108.4 °C P261, P233, P280, C4H8O UN: 2056 <5 ppm
Flash point: -21 °C P305+P351+P338, P210, P240 CAS: 109-99-9 GHS: Flam. Liq. 2, Eye Irrit. <2 ppm
ADR/RID: 3, II MW: 72.11 2, STOT SE 3 <2 ppm
Density at 20°C: 0.880 H225, H335, H319, EUH019 <2 ppm
Assay (CG): >99.8 Boiling point: 66 °C P310, P304+P340, P261, <2 ppm
Melting point: -108.4 °C P273, P233, P302+P352, <0.005%
Guaranteed analysis <0.01% Residue after evaporation Flash point: -21 °C P280, P305+P351+P338, <0.01%
Water ADR/RID: 3, II P210, P240
EINECS: 203-726-8 SLR
Recommended for the synthesis of DNA and peptide sequencing.
Mfr. No
Assay (CG): >99.5% T/0850/08
Tetrahydrofuran stabilised with 0.025% BHT Certified AR Guaranteed analysis <0.0005 meq/g Potassium (K) Certified
<10 APHA Sodium (Na)
for analysis Acidity / Alkalinity <0.05% Total phosphorus (P) Mfr. No
Color <5 ppm Total silicon (Si) T/0931/46
packaging Cat. No Mfr. No Water <2 ppm Total sulphur (S)
T/0701/15 Calcium (Ca) <5 ppm Zinc (Zn)
1 Ò Glass bottle 1016-2350 T/0701/PB15 Copper (Cu) <2 ppm Residue after ignition
1 Ò Coated Glass bottle 1010-2352 T/0701/17 Iron (Fe) <2 ppm Peroxide
T/0701/PB17 Lead (Pb)
2.5 Ò Glass bottle 1055-9770 T/0701/21 Magnesium (Mg)
T/0701/25
2.5 Ò Coated Glass bottle 1021-4260 Stabilised with 0.025% BHT.
5Ò Fluorinated HDPE Plastic bottle 1013-2400 <0.1 ppm
25 Ò Metal drum 1028-4300 <0.5 ppm
C4H8O UN: 2056 <1 ppm Tetrahydronaphthalene
CAS: 109-99-9 GHS: Flam. Liq. 2, Eye Irrit. <0.1 ppm
MW: 72.11 2, STOT SE 3 <0.5 ppm specified reagents for general laboratory work- extra pure
Density at 20°C: 0.880 H225, H335, H319, EUH019 <0.2 ppm
Boiling point: 66 °C P310, P304+P340, P261, packaging Cat. No
Melting point: -108.4 °C P273, P233, P302+P352, <0.1%
Flash point: -21 °C P280, P305+P351+P338, <0.005% 500 mÒ Glass bottle 1040-6890
ADR/RID: 3, II P210, P240
EINECS: 203-726-8 <0.02 ppm C10H12 EINECS: 204-340-2
<0.02 ppm CAS: 119-64-2 UN: 3082
Assay (CG): >99.8% <0.02 ppm MW: 132.21 GHS: Skin Irrit. 2, Eye Irrit. 2,
<0.02 ppm Density at 20°C: 0.973 Aquatic Chronic 2
Guaranteed analysis <0.0002 meq/g Magnesium (Mg) <0.02 ppm Boiling point: 207 °C H319, H411, H315, EUH019
<10 APHA Potassium (K) <0.02 ppm Melting point: -35 °C P273, P233, P302+P352,
Acidity / Alkalinity <0.03% Sodium (Na) Flash point: 77 °C P280, P305+P351+P338
Color <0.002% Total phosphorus (P) ADR/RID: 9, III
Water <0.5 ppm Total sulphur (S)
Residue after ignition <0.05 ppm Zinc (Zn) Assay (CG): >97%
Calcium (Ca) <0.1 ppm Methyl tetrahydrofuran
Copper (Cu) <0.05 ppm Peroxide Tetramethyl ammonium chloride
Iron (Fe)
Lead (Pb) for HPLC
Typical analysis <0.02 ppm Molybdenum (Mo) packaging Cat. No
<0.02 ppm Nickel (Ni)
Aluminium (Al) <0.02 ppm Strontium (Sr) 25 g Plastic jar 1044-7270
Barium (Ba) <0.02 ppm Titanium (Ti)
Cadmium (Cd) <0.02 ppm Total silicon (Si) C4H12NCl GHS: Acute Tox. 3, Skin Irrit.
Chromium (Cr) <0.02 ppm Vanadium (V) CAS: 75-57-0 2, Eye Irrit. 2, STOT SE 3
Cobalt (Co) <0.02 ppm MW: 109.60 H335, H312, H315, H301, H319
Lithium (Li) Melting point: 420 °C P301+P310, P280,
Manganese (Mn) ADR/RID: 6.1, II P302+P352, P261,
EINECS: 200-880-8 P305+P351+P338
Lot analysis on the label. UN: 2811
Stabilised with 0.025% BHT.
Assay: >98%
Absorbance specification
Max. Absorbance (1cm cell v HPLC water)
254 nm (sol. aqu. 0.1 M) : <0.05 A.U.
Lot analysis on the label.
Filtered to 0.2 µm.
A full range to discover on page 63
346
Thermit ignition powder | T
Tetramethyl ammonium hydrogen sulfate Certified Thallium standard metal solution 1000 ppm
for HPLC Mfr. No for ICP solution in HNO3 2%, NIST certified
T/0935/44
packaging Cat. No packaging Cat. No Mfr. No
100 mÒ Plastic bottle
5 g Glass jar 1009-0410 250 mÒ Plastic bottle 1149-5828 SPPLTL22Y
500 mÒ Plastic bottle 1199-3743 SPPLTL22T
C4H13NSO4 GHS: Skin Irrit. 2, Eye Irrit. 2, 1190-3753 SPPLTL22X
CAS: 80526-82-5 STOT SE 3 H315, H319
MW: 171.21 H319, H315, H335
Melting point: 295 to 297 °C P261, P302+P352, P280,
EINECS: 279-490-5 P305+P351+P338
Assay: >99% Manufactured to a tolerance of ± 0.5%.
All standards are manufactured from acids, metals & metal salts and contain less
Guaranteed analysis : <2% than <10 ppm total metal impurites.
Loss on drying 100°C See also the full range in the Standard Elemental solution for Trace metal analysis
section see page 314.
Absorbance specification Check with your local distributor for availability of Spex product
Max. Absorbance (1cm cell v HPLC water)
200 nm <0.3 A.U. 220 nm <0.05 A.U.
Lot analysis on the label.
Filtered to 0.2 µm.
Tetramethyl ammonium hydroxide solution 25% in water SLR Thallium standard metal solution 10 000 ppm
specified reagents for general laboratory work- extra pure for ICP solution in HNO3 5%, NIST certified
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
25 mÒ HDPE Plastic bottle 1055-8260 T/0940/04 100 mÒ Plastic bottle
100 mÒ HDPE Plastic bottle 1013-2450 T/0940/05 500 mÒ Plastic bottle 1141-5838 PLTL23Y
UN: 1835 1140-5838 PLTL23X
C4H13NO GHS: Acute Tox. 3, Skin Corr. 1B <0.2% H302, H314
CAS: 75-59-2 H314, H301, H311 <0.3%
MW: 91.15 P280, P301+P330+P331, Manufactured to a tolerance of ± 0.5%.
Density at 20°C: 1.02 P305+P351+P338, P310, All standards are manufactured from acids, metals & metal salts and contain less
Boiling point: 110 °C P302+P352 than <10 ppm total metal impurites.
ADR/RID: 8, II See also the full range in the Standard Elemental solution for Trace metal analysis
EINECS: 200-882-9 <20 APHA Halogenated compounds section see page 314.
: <0.2% Residue after ignition Check with your local distributor for availability of Spex product
Assay: >24.5%
Guaranteed analysis
Color
Halides (Cl)
Polyethylene glycol mono [4-(1.1,3.3-tetra-
methylbutyl)phenyl] ether
See Triton X-100®, page 363
Thallium standard metal solution 1000 ppm
N,N,N’,N’-Tetramethyl-p-phenylene-diamine dihydrochloride SLR for ICP-MS solution in HNO3 2%, NIST certified
specified reagents for general laboratory work- extra pure packaging Cat. No Mfr. No
100 mÒ Plastic bottle 1145-6008 SPCLTL22Y
packaging Cat. No Mfr. No H315, H320
5 g Plastic jar 1063-6082 T/0960/44 Manufactured to a tolerance of ± 0.5%.
10 g Plastic jar 1032-6440 T/0960/45 All standards are manufactured from acids, metals & metal salts and contain less
than <10 ppm total metal impurites.
C10H16N2.2HCl GHS: Acute Tox. 4, Skin Irrit. See also the full range in the Standard Elemental solution for Trace metal analysis
CAS: 637-01-4 2, Eye Irrit. 2, STOT SE 3 section see page 314.
MW: 237.17 H312, H315, H302, H335, Check with your local distributor for availability of Spex product
Melting point: 220 to 224 °C H319, H332
ADR/RID: 6.1, III P280, P302+P352, P261,
EINECS: 211-274-8 P301+P312, P304+P340,
UN: 2811 P305+P351+P338
Assay: >97%
TFA See Trifluoroacetic acid, page 358 Thermit ignition powder
See page 308 for more information pure
packaging Cat. No Mfr. No
T/0978/50
250 g Glass jar 1051-9210
ADR/RID: 5.1, II react. 2, Ox. Sol. 2, Acute Tox. 4
EINECS: 215-128-4 H228, H261, H272, H302, H332
UN: 1479 P210, P220, P221,
GHS: Flam. Sol. 1, Water- P301+P312, P304+P340, P240
Guaranteed analysis : Pass
Identity test
347
T | Thermit powder
Thermit powder Thiourea SLR
pure specified reagents for general laboratory work- extra pure Mfr. No
T/1150/50
packaging Cat. No Mfr. No packaging Cat. No T/1150/53
500 g Glass jar 1020-4120 T/0977/53 T/1150/68
ADR/RID: 4.1, III H228, H261 250 g Plastic jar 1147-8882
EINECS: 215-168-2 P233, P210, P240, P280, 500 g Plastic jar 1148-8882
UN: 3178 P223, P231+P232 10 kg Plastic keg 1269-6777
GHS: Flam. Sol. 1, Water-react. 2
: Pass CH4N2S UN: 2811
Guaranteed analysis CAS: 62-56-6 GHS: Carc. 2, Repr. 2, Acute
Identity test MW: 76.12 Tox. 4, Aquatic Chronic 2
Density at 20°C: 1.405 H351, H361d, H302, H411
Melting point: 171 to 175 °C P301+P310, P310, P281,
ADR/RID: 6.1, III P304+P340, P273
EINECS: 200-543-5
Thioacetamide SLR
specified reagents for general laboratory work- extra pure
packaging Cat. No Mfr. No Assay: >99% <200 ppm Sodium (Na) <200 ppm
1002-0490 T/0980/46 <20 ppm n-Butyl formate <0.05%
25 g Plastic jar Skin Irrit. 2, Eye Irrit. 2, Guaranteed analysis <20 ppm Total phosphorus (P)
Aquatic Chronic 3 <20 ppm Total silicon (Si) <200 ppm
C2H5NS H315, H350, H412, H319, H302 Calcium (Ca) Zinc (Zn) <100 ppm
CAS: 62-55-5 P201, P308+P313, P273, Copper (Cu) <100 ppm
MW: 75.13 P301+P312, P302+P352, Iron (Fe) <100 ppm <50 ppm
Density at 20°C: 1.37 P280, P305+P351+P338 Lead (Pb)
Melting point: 112 to 114 °C Magnesium (Mg)
EINECS: 200-541-4 <0.05% Potassium (K)
GHS: Carc. 1B, Acute Tox. 4,
Thorium standard metal solution 1000 ppm
Assay: >98%
Guaranteed analysis
Residue after ignition
for ICP solution in HNO3 2%, NIST certified
2.2’-Thiodiethanol packaging Cat. No Mfr. No
100 mÒ Plastic bottle
for amino acid analysis, ( thioglycolic acid) 500 mÒ Plastic bottle 1192-3743 SPPLTH22Y
1191-3743 SPPLTH22X
H315, H319
packaging Cat. No Mfr. No
100 g Coated Glass bottle 1026-4160 T/0998/48 Manufactured to a tolerance of ± 0.5%.
EINECS: 203-874-3 All standards are manufactured from acids, metals & metal salts and contain less
C4H10O2S GHS: Eye Irrit. 2 : Pass than <10 ppm total metal impurites.
CAS: 111-48-8 H319 See also the full range in the Standard Elemental solution for Trace metal analysis
MW: 122.19 P280, P305+P351+P338 section see page 314.
Density at 20°C: 1.18 Check with your local distributor for availability of Spex product
Boiling point: 165 °C <5 APHA Ninhydrin reaction test
Guaranteed analysis
Color
packed under nitrogen
Thorium standard metal solution 1000 ppm
Thioglycolic acid SLR for ICP-MS solution in HNO3 2%, NIST certified
specified reagents for general laboratory work- extra pure Mfr. No packaging Cat. No Mfr. No
T/1000/PB05 100 mÒ Plastic bottle 1143-6008 SPCLTH22Y
packaging Cat. No T/1000/PB07
1002-0500 T/1000/PB17 H315, H319
100 mÒ Coated Glass bottle 1059-9390
250 mÒ Coated Glass bottle 1035-5720 Manufactured to a tolerance of ± 0.5%.
2.5 Ò Coated Glass bottle UN: 1940 All standards are manufactured from acids, metals & metal salts and contain less
GHS: Acute Tox. 3, Skin than <10 ppm total metal impurites.
C2H4O2S Corr. 1B, Eye Dam. 1 See also the full range in the Standard Elemental solution for Trace metal analysis
CAS: 68-11-1 H314, H301, H311, H331 section see page 314.
MW: 92.12 P301+P310, P280, Check with your local distributor for availability of Spex product
Density at 20°C: 1.325 P302+P350,
Boiling point: 220 °C P301+P330+P331, Thullium standard metal solution 1000 ppm
Melting point: -16 °C P305+P351+P338, P304+P340
Flash point: 126 °C for ICP solution in HNO3 2%, NIST certified
ADR/RID: 8, II : Pass
EINECS: 200-677-4
Assay: >97%
Guaranteed analysis
Sensitivity test (iron)
packaging Cat. No Mfr. No
100 mÒ Plastic bottle 1194-3753 SPPLTM22Y
500 mÒ Plastic bottle 1193-3753 SPPLTM22X
H315, H319
Manufactured to a tolerance of ± 0.5%.
All standards are manufactured from acids, metals & metal salts and contain less
than <10 ppm total metal impurites.
See also the full range in the Standard Elemental solution for Trace metal analysis
section see page 314.
Check with your local distributor for availability of Spex product
348
Tin standard metal solution 10 000 ppm | T
Thymol SLR Thymolsulfonephthaleindi-(methyl-iminodiacetic acid) sodium salt
specified reagents for general laboratory work- extra pure pure
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
T/1450/48 1 g Glass jar 1077-6111 T/1500/43
100 g Plastic jar 1059-9580 C37H41N2Na3O13S
CAS: 1945-77-3
C10H14O EINECS: 201-944-8 MW: 822.78
CAS: 89-83-8 UN: 2430 EINECS: 217-743-3
MW: 150.22 GHS: Acute Tox. 4, Skin
Density at 20°C: 0.960 Corr. 1B, Aquatic Chronic 2 Guaranteed analysis
Boiling point: 232 °C H411, H302, H314 Complies with standard IR spectrum: Pass
Freezing point: <49 °C P301+P330+P331, P280,
Melting point: 48 to 52 °C P305+P351+P338, P310,
Flash point: 102 °C P273, P301+P312
ADR/RID: 8, III
Guaranteed analysis Tillman’s reagent See Phenol-indo-2, page 240
Residue after evaporation
<0.05%
Thymol blue solution 0.04% Tin standard metal solution 1000 ppm
pure, indicator grade for AAS, solution HCl 1M
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
500 mÒ Glass bottle 1076-5921 T/1470L/08
GHS: Flam. Liq. 3 100 mÒ HDPE Plastic bottle 1055-9652 J/8067/05
Flash point: 32 °C H226 500 mÒ HDPE Plastic bottle 1065-7222 J/8067/08
ADR/RID: 3, III P210
UN: 1170 GHS: Skin Irrit. 2
: Pass H315
Guaranteed analysis P302+P352
pH colour change test
Manufactured to a tolerance of ± 0.5%.
See also the full range in the Standard Elemental solution for Trace metal analysis
section see page 314.
Thymol blue Tin standard metal solution 1000 ppm
pure, indicator grade for ICP, solution HCl 1M
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
5 g Glass jar T/1470/44 1028-4290 J/8326/08
C27H30O5S 1069-6462 500 mÒ HDPE Plastic bottle
CAS: 76-61-9
MW: 466.58 Melting point: 221 °C GHS: Skin Irrit. 2
EINECS: 200-973-3 H315
Guaranteed analysis P302+P352
pH colour change test
: Pass Complies with standard IR spectrum: Pass Manufactured to a tolerance of ± 0.5%.
pH 1.2-2.8 red to yellow. All standards are manufactured from acids, metals & metal salts and contain less
pH 8.0-9.6 yellow to blue. than <10 ppm total metal impurites.
See also the full range in the Standard Elemental solution for Trace metal analysis
section see page 314.
Thymolphthalein solid Tin standard metal solution 10 000 ppm
pure, indicator grade for ICP, solution HCl 1M
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
1056-8430 J/8325/05
100 mÒ HDPE Plastic bottle
5 g Glass jar 1069-6652 T/1480/44
25 g Glass jar 1076-6111 T/1480/46 GHS: Skin Irrit. 2
H315
C28H30O4 Melting point: 251 to 253 °C P302+P352
CAS: 125-20-2 EINECS: 204-729-7
MW: 430.53 Manufactured to a tolerance of ± 0.5%.
All standards are manufactured from acids, metals & metal salts and contain less
Guaranteed analysis : Pass Complies with standard IR spectrum: Pass than <10 ppm total metal impurites.
pH colour change test See also the full range in the Standard Elemental solution for Trace metal analysis
section see page 314.
pH 9.3-10.5 colorless to blue.
Conforming to the IR spectrum of reference.
Thymolphthalein solution 0.2%
pure, indicator grade
packaging Cat. No Mfr. No
500 mÒ Glass bottle 1043-9190 T/1480L/08
GHS: Flam. Liq. 2
Flash point: 22 °C H225 Read more page 24
ADR/RID: 3, II P210, P240, P241, P280,
EINECS: 200-578-6 P303+P361+P353
UN: 1170
: Pass
Guaranteed analysis
pH colour change test
349
T | Tin standard metal solution 1000 ppm
Tin standard metal solution 1000 ppm Tin standard metal solution 1000 ppm
for ICP solution in HNO3 1%/HF 1%, NIST certified for ICP-MS solution in HNO3 1%/HF 1%, NIST certified
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
500 mÒ Plastic bottle 1191-3713 SPPLSN22X 100 mÒ Plastic bottle 1141-6008 SPCLSN22Y
H311, H319 H311, H319
Manufactured to a tolerance of ± 0.5%. Manufactured to a tolerance of ± 0.5%.
All standards are manufactured from acids, metals & metal salts and contain less All standards are manufactured from acids, metals & metal salts and contain less
than <10 ppm total metal impurites. than <10 ppm total metal impurites.
See also the full range in the Standard Elemental solution for Trace metal analysis See also the full range in the Standard Elemental solution for Trace metal analysis
section see page 314. section see page 314.
Check with your local distributor for availability of Spex product Check with your local distributor for availability of Spex product
Tin (metal) Certified AR
for analysis
packaging Cat. No Mfr. No
T/1640/50
250 g Plastic jar 1024-4640
Tin standard metal solution 1000 ppm
Sn Boiling point: 2270 °C
for ICP solution in HCL 20%, NIST certified CAS: 7440-31-5 Melting point: 231.9 °C
MW: 118.69 EINECS: 231-141-8
Density at 20°C: 7.31
packaging Cat. No Mfr. No
100 mÒ Plastic bottle Assay: >99.5%
250 mÒ Plastic bottle 1146-8849 SPPLSN52Y
500 mÒ Plastic bottle 1193-3713 SPPLSN52T Guaranteed analysis <200 ppm Iron (Fe) <100 ppm
1194-3713 SPPLSN52X <40 ppm Lead (Pb) <50 ppm
H315, H319, H335 Antimony (Sb) <10 ppm Zinc (Zn) <20 ppm
Bismuth (Bi)
Copper (Cu)
The prices applied to the tin and derivatives vary with the price of the raw material.
Manufactured to a tolerance of ± 0.5%. Tin metal powder fine
All standards are manufactured from acids, metals & metal salts and contain less
than <10 ppm total metal impurites. pure
See also the full range in the Standard Elemental solution for Trace metal analysis
section see page 314. packaging Cat. No Mfr. No
Check with your local distributor for availability of Spex product
100 g Plastic jar 1054-8640 T/1650/48
Tin standard metal solution 10 000 ppm Sn Melting point: 231.9 °C
CAS: 7440-31-5 EINECS: 231-141-8
MW: 118.69 GHS: Eye Irrit. 2, STOT SE 3
Density at 20°C: 7.31 H319, H335
Boiling point: 2270 °C P280, P305+P351+P338
for ICP solution in HNO3 2%/HF 2%, NIST certified Guaranteed analysis
Identity test
packaging Cat. No Mfr. No : Pass
500 mÒ Plastic bottle 1192-3713 SPPLSN23X
H311, H314, H333 The prices applied to the tin and derivatives vary with the price of the raw material.
Tin metal foil (0.10 mm )
pure
packaging Cat. No Mfr. No
Manufactured to a tolerance of ± 0.5%. 100 g Plastic jar 1044-9190 T/1560/48
All standards are manufactured from acids, metals & metal salts and contain less 500 g Plastic jar 1066-5312 T/1560/53
than <10 ppm total metal impurites.
See also the full range in the Standard Elemental solution for Trace metal analysis Sn Boiling point: 2270 °C
section see page 314. CAS: 7440-31-5 Melting point: 231.9 °C
Check with your local distributor for availability of Spex product MW: 118.69 EINECS: 231-141-8
Density at 20°C: 7.31
Guaranteed analysis : Pass
Identity test
The prices applied to the tin and derivatives vary with the price of the raw material.
Tin standard metal solution 10 000 ppm Tin metal
for ICP solution in HCL 20%, NIST certified pure
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
100 mÒ Plastic bottle
500 mÒ Plastic bottle 1196-3713 SPPLSN53Y 100 g Plastic jar 1015-2590 T/1600/48
1195-3713 SPPLSN53X 500 g Plastic jar 1023-4640 T/1600/53
H315, H319, H335
Manufactured to a tolerance of ± 0.5%. Sn Boiling point: 2270 °C
All standards are manufactured from acids, metals & metal salts and contain less CAS: 7440-31-5 Melting point: 231.9 °C
than <10 ppm total metal impurites. MW: 118.69 EINECS: 231-141-8
See also the full range in the Standard Elemental solution for Trace metal analysis Density at 20°C: 7.31
section see page 314.
Check with your local distributor for availability of Spex product Guaranteed analysis : Pass
Identity test
The prices applied to the tin and derivatives vary with the price of the raw material.
350
The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.
Reagentes
Discover the best professional documents and content resources in AnyFlip Document Base.
Search
Fisher reagentes
- 1 - 50
- 51 - 100
- 101 - 150
- 151 - 200
- 201 - 250
- 251 - 300
- 301 - 350
- 351 - 400
- 401 - 450
- 451 - 500
- 501 - 501
Pages: