Decahydronaphthalene | D
Cyclohexanone SLR L-Cysteine hydrochloride monohydrate
specified reagents for general laboratory work- extra pure pure
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
C/9040/PB08 C/9152/48
500 mÒ Coated Glass bottle 1043-9360 C/9040/PB17 100 g Plastic jar 1049-9740
2.5 Ò Coated Glass bottle 1044-9360 <30 ppm
5Ò Fluorinated HDPE Plastic bottle 1023-3520 C/9040/21 C3H7NO2S.HCl.H2O GHS: Skin Irrit. 2, Eye Irrit. 2, <10 ppm
25 Ò Metal drum 1058-8990 C/9040/25 CAS: 7048-04-6 STOT SE 3
MW: 175.63 H315, H319, H335 <0.02%
C6H10O ADR/RID: 3, III <2 ppm Melting point: 175 to 177.8 °C P280, P305+P351+P338
CAS: 108-94-1 EINECS: 203-631-1 <50 ppm EINECS: 200-157-7 Mfr. No
MW: 98.15 UN: 1915 <10 ppm C/9160/46
Density at 20°C: 0.947 GHS: Flam. Liq. 3, Acute Tox. 4 Assay: >98.5%
Boiling point: 155 °C H226, H332 <1 ppm <20 ppm
Melting point: -47 °C P280, P302+P350, <20 ppm Guaranteed analysis 5.5° to 7° Iron (Fe) <10 ppm
Flash point: 43 °C P304+P340, P210 <0.1% Lead (Pb)
<1 ppm Specific rotation Sulfate (SO4) SLR
Assay (CG): >99% Residue after ignition <0.03% Mfr. No
SLR Ammonium (NH4) <1 ppm D/0008/44
Arsenic (As)
Mfr. No Mfr. No
Guaranteed analysis <0.03 meq/g Potassium (K) C/9080/07 L-Cystine Cat. No D/0050/17
<20 APHA Sodium (Na) C/9080/08 1001-0070
Acidity / Alkalinity <5 ppm Total phosphorus (P) pure 2, Eye Irrit. 2, STOT SE 3
Color <1 ppm Total silicon (Si) H315, H319, H302, H335
Calcium (Ca) <2 ppm Total sulphur (S) packaging P261, P301+P312,
Copper (Cu) <1 ppm Zinc (Zn) 25 g Plastic jar P302+P352, P280,
Iron (Fe) <1 ppm C6H12N2O4S2 P305+P351+P338
Lead (Pb) CAS: 56-89-3
Magnesium (Mg) MW: 240.29 <-210° Iron (Fe)
Melting point: 260 to 261 °C <0.5% Lead (Pb)
Cyclohexene EINECS: 200-296-3
GHS: Acute Tox. 4, Skin Irrit.
specified reagents for general laboratory work- extra pure
Assay: >99%
packaging Cat. No
Guaranteed analysis
250 mÒ Glass bottle 1144-8153 Specific rotation
500 mÒ Glass bottle 1047-9550 Residue after ignition
C6H10 EINECS: 203-807-8 Dansyl chloride
CAS: 110-83-8 UN: 2256
MW: 82.15 GHS: Flam. Liq. 2, Acute specified reagents for general laboratory work- extra pure
Density at 20°C: 0.810 Tox. 4, Asp. Tox. 1, Aquatic
Boiling point: 83 °C Chronic 2 packaging Cat. No
Melting point: -104 °C H225, H304, H312, H302, H411
Flash point: -20 °C P280, P302+P352, 5 g Plastic jar 1064-5872
ADR/RID: 3, II P301+P310, P331, P210, P240
C12H12ClNO2S GHS: Acute Tox. 4, Skin
Assay (CG): >99% CAS: 605-65-2 Corr. 1B, Eye Dam. 1
MW: 269.75 H302, H314, EUH029
L-Cysteine Melting point: 71 to 74 °C P301+P330+P331, P280,
ADR/RID: 8, II P305+P351+P338, P310,
pure EINECS: 210-092-6 P402+P404, P301+P312
UN: 3261
Assay: >99%
packaging Cat. No Mfr. No Decahydronaphthalene
1032-5460
25 g Plastic jar 2, Eye Irrit. 2, STOT SE 3 C/9150/46 Technical
H302, H319, H315, H335
C3H7NO2S P261, P301+P312, <10 ppm packaging Cat. No
CAS: 52-90-4 P302+P352, P280, <10 ppm
MW: 121.16 P305+P351+P338 2.5 Ò Glass bottle 1041-9170
Melting point: 220 °C
EINECS: 200-158-2 6.5° to 8° Iron (Fe) C10H18 UN: 1147
GHS: Acute Tox. 4, Skin Irrit. <0.1% Lead (Pb) CAS: 91-17-8 GHS: Flam. Liq. 3, Acute
MW: 138.25 Tox. 3, Skin Irrit. 2, Eye Irrit.
Assay: >98% Density at 20°C: 0.890 2, STOT SE 3
Boiling point: 187 °C H226, H319, H331, H335, H315
Guaranteed analysis Melting point: -31 °C P304+P340, P261,
Specific rotation Flash point: 58 °C P302+P352, P280,
Residue after ignition ADR/RID: 3, III P305+P351+P338, P210
EINECS: 202-046-9
See page 308 for more information
101
D | n-Decane
n-Decane Devarda’s alloy
Technical pure, Silylation reagent
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
100 mÒ Glass bottle 1233-7143 D/0100/50
500 mÒ Glass bottle 1079-4171 D/0020/05 250 g Plastic jar UN: 3089
1070-4181 D/0020/08 GHS: Flam. Sol. 2 Mfr. No
C10H22 CAS: 8049-11-4 H228 D/0122/48
CAS: 124-18-5 ADR/RID: 3, III Density at 20°C: 5.8 P210, P240, P241, P280
MW: 142.29 EINECS: 204-686-4 Melting point: 550 °C Mfr. No
Density at 20°C: 0.735 UN: 2247 ADR/RID: 4.1, II : Pass D/0124/48
Boiling point: 174 °C GHS: Flam. Liq. 3, Asp. Tox. 1
Melting point: -30 °C H226, H304, EUH066 Guaranteed analysis Mfr. No
Flash point: 46 °C P301+P310, P331, P210 Identity test D/0130/48
Assay (CG): >98%
Dextran 150
pure, M.W. 100.000-200.000
1-Decanesulfonic acid sodium salt Certified packaging Cat. No
100 g Plastic jar 1055-8800
for Ion pair chromatography with electrochemical detection CAS: 9004-54-0
EINECS: 232-677-5 Cat. No
packaging Cat. No Mfr. No : Pass 1004-0060
D/0035/44 Guaranteed analysis
5 g Glass jar 1071-1974 Identity test
C10H21NaO3S Melting point: >300 °C
CAS: 13419-61-9 EINECS: 236-525-9
MW: 244.31
Assay: >98%
Guaranteed analysis Pass Dextran 70
Electrochemical test
pure, M.W. 60.000-80.000
Absorbance specification
Max. Absorbance (1cm cell v HPLC water) packaging
100 g Plastic jar
254 nm (sol. aqu. 0.005 M) : <0.05 A.U. CAS: 9004-54-0
EINECS: 232-677-5
Lot analysis on the label.
Guaranteed analysis
EC Specification: Complies with standard IR spectrum: Pass
Tested by HPLC-EC to ensure low electrochemical response.
Detector - ESA Coulochem II
Mode-Oxidative
Electrode graphite
Dextrin
Technical
1-Decanesulfonic acid sodium salt Certified packaging Cat. No
100 g Plastic jar 1056-8990
for Ion pair chromatography Mfr. No C6H10O5
D/0030/46 CAS: 9004-53-9
packaging Cat. No MW: 162.07
EINECS: 232-675-4
25 g Glass jar 1040-8980
Guaranteed analysis
C10H21NaO3S Melting point: >300 °C Complies with standard IR spectrum: Pass
CAS: 13419-61-9 EINECS: 236-525-9
MW: 244.31 Conforming to the IR spectrum of reference.
Assay: >98%
Absorbance specification
Max. Absorbance (1cm cell v HPLC water)
254 nm (sol. aqu. 0.005 M) : <0.05 A.U.
Lot analysis on the label. Dextrose See D(+)-Glucose anhydrous, page 135
Dekalin Diacetone alcohol SLR
Mfr. No
pure specified reagents for general laboratory work- extra pure D/0150/08
packaging Cat. No Mfr. No packaging Cat. No <200 ppm
2.5 Ò Glass bottle D/0052/17 1061-4722
C10H18 1140-8163 500 mÒ Glass bottle ADR/RID: 3, III
CAS: 91-17-8 EINECS: 204-626-7
MW: 138.25 UN: 1147 C6H12O2 UN: 1148
Density at 20°C: 0.890 GHS: Flam. Liq. 3, Acute CAS: 123-42-2 GHS: Eye Irrit. 2
Boiling point: 187 °C Tox. 3, Skin Irrit. 2, Eye Irrit. MW: 116.16 H319
Melting point: -31 °C 2, STOT SE 3 Density at 20°C: 0.939 P264, P280,
Flash point: 58 °C H226, H319, H331, H335, H315 Boiling point: 166 °C P305+P351+P338, P337+P313
ADR/RID: 3, III P304+P340, P261, Melting point: -42.8 °C
EINECS: 202-046-9 P302+P352, P280, Flash point: 58 °C <0.2% Residue after evaporation
P305+P351+P338, P210 : <1.425
Assay (CG): >98% Guaranteed analysis
102 Water
Refractive index at 20°C
Di-n-butylamine | D
Diacetyl SLR L(+)-2.6-Diaminohexanoic acid hydrochloride
specified reagents for general laboratory work- extra pure See L-Lysine monohydrochloride, page 186
packaging Cat. No Mfr. No
D/0250/05
100 mÒ Glass bottle 1005-0060
3.7-Diamino-5-phenylphenazinium chloride
C4H6O2 EINECS: 207-069-8
CAS: 431-03-8 UN: 2346 See Phenosafranine, page 241
MW: 86.09 GHS: Flam. Liq. 2, Acute
Density at 20°C: 0.985 Tox. 3, Skin Irrit. 2, Eye Irrit. 2
Boiling point: 88 °C H225, H302, H315, H319, H331
Melting point: -4 to-2 °C P280, P302+P352, P261,
Flash point: 7 °C P310, P305+P351+P338, P210
ADR/RID: 3, II
Diastase
Assay (CG): >98%
pure, from malt, mixed alpha and beta amylase
1.2-Diaminoethane anhydrous SLR packaging Cat. No Mfr. No
100 g Plastic jar 1020-3190 D/0800/48
specified reagents for general laboratory work- extra pure Mfr. No H334
D/0370/PB08 CAS: 9000-92-4 P261, P304+P341, P342+P311 Pass
packaging Cat. No D/0370/PB17 EINECS: 232-567-7
GHS: Resp. Sens. 1 <4 EU/mg Reducing sugar SLR
500 mÒ Coated Glass bottle 1045-9360 D/0370/25 Mfr. No
2.5 Ò Coated Glass bottle 1063-4722 Guaranteed analysis D/1250/PB08
25 Ò Metal drum 1245-7600 Activity
C2H8N2 GHS: Flam. Liq. 3, Acute 1.2-Dibromoethane
CAS: 107-15-3 Tox. 3, Skin Corr. 1B, Eye
MW: 60.10 Dam. 1, Resp. Sens. 1, Skin specified reagents for general laboratory work- extra pure
Density at 20°C: 0.898 Sens. 1
Boiling point: 117 to 118 °C H226, H314, H302, H311, packaging Cat. No
Melting point: 11 °C H334, H317
Flash point: 38 °C P280, P301+P330+P331, 500 mÒ Coated Glass bottle 1038-6080
ADR/RID: 8, 3, II P310, P305+P351+P338,
EINECS: 203-468-6 P303+P361+P353, P210 C2H4Br2 UN: 1605
UN: 1604 CAS: 106-93-4 GHS: Carc. 1B, Acute Tox. 3,
MW: 187.88 Skin Irrit. 2, Eye Irrit. 2,
Assay: >98% Density at 20°C: 2.173 STOT SE 3, Aquatic Chronic 2
Boiling point: 131 to 132 °C H319, H315, H350, H411,
Melting point: 9 to 10 °C H311, H331, H335, H301
Flash point: >104 °C P280, P302+P350,
ADR/RID: 6.1, I P308+P313, P304+P340,
EINECS: 203-444-5 P261, P273, P305+P351+P338
1.2-Di(2-aminoethoxy)ethane-N,N,N,N-tetraacetic acid Assay (CG): >98% <200 ppm
pure Guaranteed analysis
Residue after evaporation
packaging Cat. No Mfr. No
25 g Plastic jar D/0755/46
C14H24N2O10 1032-5990
CAS: 67-42-5 5’,5’’-Dibromophenolsulfonphthalein
MW: 380.35 Melting point: 240 to 245 °C
Flash point: >200 °C See Bromophenol red, page 62
Assay: >98% EINECS: 200-651-2
1.6-Diaminohexane 3’,3’’-Dibromothymolsulfonephthalein
specified reagents for general laboratory work- extra pure SLR See Bromothymol blue, page 62
packaging Cat. No Mfr. No Di-n-butylamine Certified
25 g Glass jar 1027-3900 D/0760/46
C6H16N2 UN: 2280 for HPLC
CAS: 124-09-4 GHS: Acute Tox. 4, Skin
MW: 116.21 Corr. 1B, Eye Dam. 1, STOT SE 3 packaging Cat. No Mfr. No
Boiling point: 204 to 205 °C H312, H314, H335, H302 D/1338/PB07
Melting point: 38 to 41 °C P280, P301+P330+P331, 250 mÒ Coated Glass bottle 1041-8790
Flash point: 81 °C P305+P351+P338, P310,
ADR/RID: 8, III P302+P352, P261 C8H19N UN: 2248
EINECS: 204-679-6 CAS: 111-92-2 GHS: Flam. Liq. 3, Acute
Assay: 99 to 101% Cat. No MW: 129.25 Tox. 2, Skin Corr. 1B, Eye Dam. 1
1033-5990 Density at 20°C: 0.760 H226, H311, H314, H330, H301
1.6-Diaminohexane H314 Boiling point: 159 °C P280, P312, P302+P350,
P301+P330+P331, P280, Melting point: -62 °C P301+P330+P331,
pure, solution 5% in water P305+P351+P338, P310 Flash point: 39 °C P305+P351+P338, P310,
ADR/RID: 8, 3, II P304+P340, P210
packaging EINECS: 203-921-8
250 mÒ Coated Glass bottle
ADR/RID: 8, III Mfr. No Assay (CG): >99%
UN: 3267 D/0765/PB07
GHS: Skin Corr. 1B, Eye Dam. 1 Absorbance specification
Max. Absorbance (1cm cell v HPLC water)
254 nm (sol. aqu. 0.02 M) : <0.01 A.U.
Lot analysis on the label.
Filtered to 0.2 µm.
103
D | Di-n-butylamine
Di-n-butylamine Di-n-butyl phthalate SLR
Mfr. No
pure specified reagents for general laboratory work- extra pure D/1500/08
D/1500/17
packaging Cat. No Mfr. No packaging Cat. No D/1500/27
500 mÒ Coated Glass bottle D/1340/PB08 500 mÒ Glass bottle 1010-1570
C8H19N 1034-5940 2.5 Ò Glass bottle 1006-0110 <0.01%
CAS: 111-92-2 200 Ò Metal drum 1191-7493
MW: 129.25 UN: 2248 ADR/RID: 9, III
Density at 20°C: 0.760 GHS: Flam. Liq. 3, Acute C16H22O4 EINECS: 201-557-4
Boiling point: 159 °C Tox. 2, Skin Corr. 1B, Eye Dam. 1 CAS: 84-74-2 UN: 3082
Melting point: -62 °C H226, H311, H314, H330, H301 MW: 278.35 GHS: Repr. 1B, Aquatic Acute 1
Flash point: 39 °C P280, P312, P302+P350, Density at 20°C: 1.043 H360Df, H400
ADR/RID: 8, 3, II P301+P330+P331, Boiling point: 340 °C P201, P308+P313,
EINECS: 203-921-8 P305+P351+P338, P310, Melting point: -35 °C P273, P304+P340
P304+P340, P210 Flash point: 188 °C
Assay (CG): >98% <0.003 meq/g Residue after ignition
Assay (CG): >99%
Guaranteed analysis
Acidity
Di-n-butylamine phosphate Certified
for HPLC, solution 1.0 M Dichloroacetic acid SLR
packaging Cat. No Mfr. No specified reagents for general laboratory work- extra pure Mfr. No
100 mÒ Glass bottle 1028-3180 D/1341/05 D/1550/PB05
(CH3(CH2)3)2NH.H3PO4 packaging Cat. No D/1550/PB15
Density at 20°C: 1.06 Mfr. No 100 mÒ Coated Glass bottle 1028-3230
D/1345/53 1 Ò Coated Glass bottle 1027-4342
Absorbance specification EINECS: 201-207-0
Max. Absorbance (1cm cell v HPLC water) C2H2Cl2O2 UN: 1764
CAS: 79-43-6 GHS: Skin Corr. 1A, Aquatic
254 nm <0.05 A.U. MW: 128.94 Acute 1
Density at 20°C: 1.56 H314, H400
Filtered to 0.2 µm. Boiling point: 194 °C P280, P312, P302+P350,
Freezing point: 11 to 13 °C P301+P330+P331,
2.6-Di-tert-butyl-p-cresol Melting point: 9 to 11 °C P305+P351+P338, P273
Flash point: >112 °C
pure ADR/RID: 8, II <0.001%
packaging Cat. No Assay: >99%
500 g Plastic jar 1055-0721 Guaranteed analysis
C15H24O UN: 3077 Sulfate (SO4)
CAS: 128-37-0 GHS: Acute Tox. 4, Skin Irrit.
MW: 220.36 2, Eye Irrit. 2, STOT SE 3, Suitable for DNA synthesis.
Boiling point: 265 °C Aquatic Acute 1, Aquatic
Melting point: 69 to 71 °C Chronic 1 1.2-Dichlorobenzene Certified AR
Flash point: 127 °C H315, H335, H410, H319, H302
ADR/RID: 9, III P261, P273, P302+P352, for analysis
EINECS: 204-881-4 P280, P305+P351+P338
Guaranteed analysis packaging Cat. No Mfr. No
Complies with standard IR spectrum: Pass D/1610/08
500 mÒ Glass bottle 1007-0110
Di-n-butyl ether <0.2 ppm
C6H4Cl2 GHS: Acute Tox. 4, Skin Irrit. <1 ppm
pure CAS: 95-50-1 2, Eye Irrit. 2, STOT SE 3,
MW: 147.01 Aquatic Acute 1, Aquatic <0.2 ppm
packaging Cat. No Mfr. No Boiling point: 179 to 180 °C Chronic 1 <0.2 ppm
Melting point: -15 °C H319, H302, H335, H410, H315 <0.5 ppm
2.5 Ò Glass bottle 1035-5940 D/1350/17 Flash point: 67 °C P261, P273, P301+P312, <0.5 ppm
25 Ò Metal drum 1267-8625 D/1350/25 ADR/RID: 6.1, III P302+P352, P280,
200 Ò Metal drum 1198-7483 D/1350/27 EINECS: 202-425-9 P305+P351+P338 <0.1%
UN: 1591 <0.1%
EINECS: 205-575-3
UN: 1149 Assay (CG): >99.5%
GHS: Flam. Liq. 3, Skin Irrit.
C8H18O 2, Eye Irrit. 2, STOT SE 3, Guaranteed analysis
CAS: 142-96-1 Aquatic Chronic 3
MW: 130.23 H226, H319, H412, H335, H315 Acidity / Alkalinity <0.0005 meq/g Potassium (K)
Density at 20°C: 0.768 P261, P273, P302+P352, Sodium (Na)
Boiling point: 141 °C P280, P305+P351+P338, P210 Color <10 APHA Total phosphorus (P)
Melting point: -95 °C Total silicon (Si)
Flash point: 25 °C Water <0.02% Total sulphur (S)
ADR/RID: 3, III Zinc (Zn)
Residue after evaporation <20 ppm 1.4-Dichlorobenzene
1.3-Dichlorobenzene
Calcium (Ca) <1 ppm
Copper (Cu) <0.05 ppm
Iron (Fe) <0.5 ppm
Assay (CG): >99% Lead (Pb) <0.05 ppm
Magnesium (Mg) <0.2 ppm
Lot analysis on the label.
See page 308 for more information A full range to discover on page 63
104
Dichloro (R) fluorescein | D
1.2-Dichlorobenzene SLR Guaranteed analysis
specified reagents for general laboratory work- extra pure Acidity / Alkalinity <0.0005 meq/g Magnesium (Mg) <0.1 ppm
Potassium (K) <0.2 ppm
Color <10 APHA Sodium (Na) <0.5 ppm
Substances <0.001%
packaging Cat. No Mfr. No Water <0.03% reducing KMnO4 <0.2 ppm
D/1600/15 Total phosphorus (P) <0.05 ppm
1 Ò Glass bottle 1043-8980 D/1600/17 Residue after evaporation <20 ppm Total silicon (Si) <0.5 ppm
2.5 Ò Glass bottle 1019-1610 D/1600/PB17 Total sulphur (S) <0.2 ppm
2.5 Ò Coated Glass bottle 1076-5901 Calcium (Ca) <0.5 ppm Zinc (Zn)
<1 ppm <0.02 ppm
<1 ppm Free Chlorine (Cl2) <1 ppm Manganese (Mn) <0.02 ppm
<5 ppm Copper (Cu) <0.05 ppm Molybdenum (Mo) <0.02 ppm
<1 ppm Nickel (Ni) <0.01 ppm
C6H4Cl2 UN: 1591 <1 ppm Iron (Fe) <1 ppm Strontium (Sr) <0.01 ppm
CAS: 95-50-1 GHS: Acute Tox. 4, Skin Irrit. <2 ppm Titanium (Ti) <0.01 ppm
MW: 147.01 2, Eye Irrit. 2, STOT SE 3, <2 ppm Lead (Pb) <0.02 ppm Vanadium (V)
Density at 20°C: 1.30 Aquatic Acute 1, Aquatic SLR
Boiling point: 180 °C Chronic 1 <2% Typical analysis <0.02 ppm
Melting point: -15 °C H319, H302, H335, H410, H315 <0.02 ppm Mfr. No
Flash point: 67 °C P261, P273, P301+P312, Aluminium (Al) <0.02 ppm D/1750/08
ADR/RID: 6.1, III P302+P352, P280, Barium (Ba) <0.02 ppm D/1750/17
EINECS: 202-425-9 P305+P351+P338 Cadmium (Cd) <0.02 ppm D/1750/21
Chromium (Cr) <0.01 ppm D/1750/25
Cobalt (Co)
Lithium (Li) <2 ppm
<1 ppm
Assay (CG): >98% Lot analysis on the label. <0.5 ppm
<1 ppm
Guaranteed analysis <2 ppm
<1 ppm
Acidity / Alkalinity <0.005 meq/g Magnesium (Mg) <0.2 ppm
Potassium (K) <2 ppm
Color <20 APHA Sodium (Na) <1 ppm
Total phosphorus (P)
Water <0.1% Total silicon (Si) 1.2-Dichloroethane Mfr. No
Total sulphur (S) D/1820/44
Residue after evaporation <200 ppm Zinc (Zn) specified reagents for general laboratory work- extra pure
Other isomers
Calcium (Ca) <5 ppm
Copper (Cu) <1 ppm packaging Cat. No
Iron (Fe) <2 ppm 500 mÒ Glass bottle 1075-4751
Lead (Pb) <1 ppm
2.5 Ò Glass bottle 1037-4930
5 Ò Fluorinated HDPE Plastic bottle 1073-4561
25 Ò Metal drum 1056-9950
1.2-Dichloroethane Cat. No Certified C2H4Cl2 UN: 1184
Mfr. No CAS: 107-06-2 GHS: Flam. Liq. 2, Carc. 1B,
for HPLC 1076-4751 MW: 98.96 Acute Tox. 4, Skin Irrit. 2,
1076-4941 D/1756/15 Density at 20°C: 1.25 Eye Irrit. 2, STOT SE 3
packaging D/1756/17 Boiling point: 81 to 85 °C H225, H350, H319, H335,
UN: 1184 Melting point: -35 °C H315, H302
1 Ò Glass bottle GHS: Flam. Liq. 2, Carc. 1B, <2 ppm Flash point: 13 °C P308+P313, P261,
2.5 Ò Glass bottle Acute Tox. 4, Skin Irrit. 2, <0.005 A.U. ADR/RID: 3, 6.1, II P302+P352, P280,
Eye Irrit. 2, STOT SE 3 <0.005 A.U. EINECS: 203-458-1 P305+P351+P338, P210
C2H4Cl2 H225, H350, H319, H335,
CAS: 107-06-2 H315, H302 Assay (CG): >99%
MW: 98.96 P308+P313, P261,
Density at 20°C: 1.25 P302+P352, P280, Guaranteed analysis
Boiling point: 81 to 85 °C P305+P351+P338, P210
Melting point: -35 °C Acidity / Alkalinity <0.0005 meq/g Iron (Fe)
Flash point: 13 °C Lead (Pb)
ADR/RID: 3, 6.1, II Color <20 APHA Magnesium (Mg)
EINECS: 203-458-1 Potassium (K)
Water <0.1% Sodium (Na)
Total phosphorus (P)
Residue after evaporation <50 ppm Total silicon (Si)
Total sulphur (S)
Free Chlorine (Cl2) <10 ppm Zinc (Zn)
Substances
Assay (CG): >99.5% reducing KMnO4 <0.01%
Calcium (Ca) <2 ppm
Guaranteed analysis Copper (Cu) <1 ppm
Acidity / Alkalinity <0.0015 meq/g Residue after evaporation
Water <0.02%
Absorbance specification Dichloro (R) fluorescein
Max. Absorbance (1cm cell v HPLC water)
Technical
240 nm <0.15 A.U. 260 nm
250 nm <0.05 A.U. 270 nm
Lot analysis on the label. packaging Cat. No
Filtered to 0.2 µm.
5 g Glass jar 1007-0080
C20H10Cl2O5 GHS: Skin Irrit. 2, Eye Irrit. 2,
CAS: 76-54-0 STOT SE 3
MW: 401.20 H315, H319, H335
Density at 20°C: 0.790 P261, P302+P352, P280,
Melting point: 280 °C P305+P351+P338
EINECS: 200-968-6
1.2-Dichloroethane Certified AR
Guaranteed analysis
for analysis Mfr. No Complies with standard IR spectrum: Pass
D/1751/15
packaging Cat. No D/1751/17
D/1751/27
1 Ò Glass bottle 1065-6062
2.5 Ò Glass bottle 1035-4980 Find out more on page 308
200 Ò Metal drum 1191-7503
C2H4Cl2 UN: 1184
CAS: 107-06-2 GHS: Flam. Liq. 2, Carc. 1B,
MW: 98.96 Acute Tox. 4, Skin Irrit. 2,
Density at 20°C: 1.25 Eye Irrit. 2, STOT SE 3
Boiling point: 81 to 85 °C H225, H350, H319, H335,
Melting point: -35 °C H315, H302
Flash point: 13 °C P308+P313, P261,
ADR/RID: 3, 6.1, II P302+P352, P280,
EINECS: 203-458-1 P305+P351+P338, P210
Assay (CG): >99.5%
105
D | Dichloromethane unstabilized
Dichloromethane unstabilised Certified Absorbance specification
Max. Absorbance (1cm cell v HPLC water)
for HPLC
240 nm <0.2 A.U. 270 nm <0.005 A.U.
packaging Cat. No Mfr. No 250 nm <0.02 A.U. 280 nm <0.005 A.U.
D/1857/15 260 nm <0.005 A.U.
1 Ò Glass bottle 1011-0342 D/1857/17 Certified
2.5 Ò Glass bottle 1034-3602 D/1857/PB17 Lot analysis on the label.
2.5 Ò Coated Glass bottle 1060-1573 D/1857/10RSS Filtered to 0.2 µm. Mfr. No
10 Ò Returnable Drum 1263-6687 D/1857/25RSS D/1861/PB17
25 Ò Returnable Drum 1266-6687 D/1857/30RSS Dichloromethane stabilised with amylene
30 Ò Returnable Drum 1267-6687 <2 ppm
<2 ppm for Gel Permeation Chromatography (GPC)
CH2Cl2 ADR/RID: 6.1, III <5 ppm Primar
CAS: 75-09-2 EINECS: 200-838-9 packaging Cat. No
MW: 84.93 UN: 1593 <0.005 A.U. 1071-5331 Mfr. No
Density at 20°C: 1.325 GHS: Carc. 2 <0.005 A.U. 2.5 Ò Coated Glass bottle ADR/RID: 6.1, III D/1855/17
Boiling point: 39 to 40 °C H351 EINECS: 200-838-9
Melting point: -97 °C P281 : >0 nM CH2Cl2 UN: 1593 <0.005 ppm
CAS: 75-09-2 GHS: Carc. 2 <0.005 ppm
Assay (CG): >99.8% MW: 84.93 H351 <0.005 ppm
Density at 20°C: 1.325 P281
Guaranteed analysis <0.0001 meq/g Residue after evaporation Boiling point: 39 to 40 °C <0.05 ppm
<0.02% Free Chlorine (Cl2) Melting point: -97 °C <5 APHA Residue after evaporation <0.005 ppm
Acidity / Alkalinity <0.02%
Water Guaranteed analysis <0.2 ppm
<0.005 ppm
Absorbance specification Color <0.005 ppm
Max. Absorbance (1cm cell v HPLC water) Water
<0.02 ppm
240 nm <0.2 A.U. 270 nm <0.02 ppm
250 nm <0.02 A.U. 280 nm
260 nm <0.005 A.U. Wavelength at 1 A.U. <0.1 ppm
<0.005 ppm
Lot analysis on the label. Dichloromethane stabilised with amylene
Filtered to 0.2 µm. <0.01 ppm
for trace metal analysis <5 APHA
<0.002%
Dichloromethane stabilised with amylene Certified packaging Cat. No <0.002%
2.5 Ò Glass bottle 1038-5840
for HPLC
CH2Cl2 ADR/RID: 6.1, III
packaging Cat. No Mfr. No CAS: 75-09-2 EINECS: 200-838-9
MW: 84.93 UN: 1593
1 Ò Glass bottle 1046-8210 D/1856/15 Density at 20°C: 1.325 GHS: Carc. 2
2.5 Ò Glass bottle 1062-6642 D/1856/17 Boiling point: 39 to 40 °C H351
2.5 Ò Coated Glass bottle 1001-0120 D/1856/PB17 Melting point: -97 °C P281
5 Ò Aluminium can 1003-0120 D/1856/21
10 Ò Returnable Drum 1262-6687 D/1856/10RSS Assay (CG): >99.9%
25 Ò Returnable Drum 1264-6687 D/1856/25RSS
30 Ò Returnable Drum 1265-6687 D/1856/30RSS Guaranteed analysis
CH2Cl2 ADR/RID: 6.1, III Acidity / Alkalinity <0.0002 meq/g Manganese (Mn)
CAS: 75-09-2 EINECS: 200-838-9 Molybdenum (Mo)
MW: 84.93 UN: 1593 Color <5 APHA Nickel (Ni)
Density at 20°C: 1.325 GHS: Carc. 2 Potassium (K)
Boiling point: 39 to 40 °C H351 Water <0.01% Propan--1-ol
Melting point: -97 °C P281 Sodium (Na)
Residue after evaporation <2 ppm Strontium (Sr)
Titanium (Ti)
Chloroform stabilized with amylene < Total phosphorus (P)
Total silicon (Si)
0.002% Total sulphur (S)
Vanadium (V)
Free Chlorine (Cl2) <100 ppm Zinc (Zn)
Aluminium (Al) <0.02 ppm Substances darkened
by H2SO4
Assay (CG): >99.8% Barium (Ba) <0.005 ppm Carbon tetrachloride
1.1-Dichloroethane
Guaranteed analysis Cadmium (Cd) <0.005 ppm
Acidity / Alkalinity <0.0001 meq/g Residue after evaporation <2 ppm Calcium (Ca) <0.05 ppm
Water <0.02% Free Chlorine (Cl2) <5 ppm
Chromium (Cr) <0.005 ppm
Cobalt (Co) <0.005 ppm
Absorbance specification Copper (Cu) <0.01 ppm
Max. Absorbance (1cm cell v HPLC water)
Iron (Fe) <0.05 ppm
233 nm <1 A.U. 260 nm <0.005 A.U. Lead (Pb) <0.005 ppm
240 nm <0.2 A.U. 270 nm <0.005 A.U.
250 nm <0.02 A.U. 280 nm <0.005 A.U. Lithium (Li) <0.005 ppm
Magnesium (Mg) <0.02 ppm
Lot analysis on the label.
Filtered to 0.2 µm.
Dichloromethane stabilised with methanol Certified
for HPLC
packaging Cat. No Mfr. No
D/1859/15
1 Ò Glass bottle 1058-0442 D/1859/17
2.5 Ò Glass bottle 1037-3082
<2 ppm
CH2Cl2 ADR/RID: 6.1, III <5 ppm
CAS: 75-09-2 EINECS: 200-838-9
MW: 84.93 UN: 1593
Density at 20°C: 1.325 GHS: Carc. 2
Boiling point: 39 to 40 °C H351
Melting point: -97 °C P281
Assay (CG): >99.8%
Guaranteed analysis <0.0001 meq/g Residue after evaporation
<0.02% Free Chlorine (Cl2)
Acidity / Alkalinity
Water
106
Dichloromethane | D
Dichloromethane stabilised with amylene Distol Dichloromethane stabilised with amylene Certified AR
for residue and pesticide analysis for analysis
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
D/1852/15
1 Ò Glass bottle 1013-2140 D/1853/15 1 Ò Glass bottle 1016-0292 D/1852/PB15
2.5 Ò Glass bottle 1050-0341 D/1853/17 D/1852/17
1 Ò Coated Glass bottle 1020-3810 D/1852/PB17
D/1852/21
CH2Cl2 ADR/RID: 6.1, III 2.5 Ò Glass bottle 1078-4941 D/1852/24
CAS: 75-09-2 EINECS: 200-838-9 D/1852/25
MW: 84.93 UN: 1593 2.5 Ò Coated Glass bottle 1067-6062 D/1852/27
Density at 20°C: 1.325 GHS: Carc. 2
Boiling point: 39 to 39 to 40 °C H351 5 Ò Fluorinated HDPE Plastic bottle 1038-6272 <0.1 ppm
Melting point: -97 °C P281 <0.05 ppm
10 Ò Metal can 1045-9973 <0.05 ppm
25 Ò Metal drum 1061-6642 <0.5 ppm
<0.5 ppm
Guaranteed analysis 200 Ò Metal drum 1072-2454 <0.2 ppm
<0.05 ppm
Water <0.02% GC (FID) Analysis Pass CH2Cl2 ADR/RID: 6.1, III <0.5 ppm
Residue after evaporation <2 ppm GC (NPD) analysis Pass CAS: 75-09-2 EINECS: 200-838-9 <0.1 ppm
GC (ECD) Analysis MW: 84.93 UN: 1593
Pass Density at 20°C: 1.325 GHS: Carc. 2 <0.01%
Boiling point: 39 to 40 to 40 °C H351 <0.005%
GC Analysis Melting point: -97 °C P281
<0.02 ppm
Analysis of pesticides: from the retention time of Lindane, after concentration of Assay (CG): >99.8% <0.02 ppm
2500 times, no impurity peak higher than that obtained with 10 pg / mÒ héptachlo- <0.02 ppm
réoxide (ECD) and 5 pg / mÒ Parathion (NPD). Guaranteed analysis <0.01 ppm
<0.01 ppm
Analysis of hydrocarbons: no impurity chain longer than the dodecane is present at Acidity / Alkalinity <0.0003 meq/g Iron (Fe) <0.01 ppm
Lead (Pb)
a concentration greater than 0.01 ppm (FID). Color <5 APHA Magnesium (Mg)
Potassium (K)
Conditions : Water <0.02% Sodium (Na)
Total phosphorus (P)
Column: J&W DB 5: 30m x 0.32mm x 0.1µm df. Residue after evaporation <10 ppm Total silicon (Si)
Total sulphur (S)
Temperature profile: Substances darkened Zinc (Zn)
Carbon tetrachloride
(1) 50°C for 2 min by (H2SO4) <5 APHA 1.1-Dichloroethane
(2) 40°C / min until 320°C Chloroform stabilized with amylene <0.01
(3) 320°C for 30 min %
Injection: 5µÒ cold on the column.
Calcium (Ca) <0.5 ppm
Free Chlorine (Cl2) <0.3 ppm
Copper (Cu) <0.02 ppm
Dichloromethane stabilised with amylene Typical analysis <0.2 ppm Manganese (Mn)
<0.01 ppm Molybdenum (Mo)
for nucleotide and peptide synthesis Aluminium (Al) <0.02 ppm Nickel (Ni)
Barium (Ba) <0.02 ppm Strontium (Sr)
Cadmium (Cd) <0.02 ppm Titanium (Ti)
Chromium (Cr) <0.01 ppm Vanadium (V)
Cobalt (Co)
Lithium (Li)
Lot analysis on the label.
packaging Cat. No Mfr. No
1 Ò Glass bottle 1052-0531 D/1858/15
2.5 Ò Glass bottle 1053-0531 D/1858/17
2.5 Ò Coated Glass bottle 1046-8400 D/1858/PB17
CH2Cl2 ADR/RID: 6.1, III
CAS: 75-09-2 EINECS: 200-838-9
MW: 84.93 UN: 1593
Density at 20°C: 1.325 GHS: Carc. 2
Boiling point: 39 to 40 °C H351
Melting point: -97 °C P281
Assay (CG): >99.9% Dichloromethane stabilised with amylene SLR
Guaranteed analysis specified reagents for general laboratory work- extra pure
Acidity / Alkalinity <0.0001 meq/g Residue after evaporation <2 ppm packaging Cat. No Mfr. No
Water <0.01% Free Chlorine (Cl2) <5 ppm D/1850/08
<0.005 A.U. 500 mÒ Glass bottle 1058-0141 D/1850/15
Absorbance specification 260 nm <0.005 A.U. 1Ò Glass bottle 1012-7611 D/1850/MC15
Max. Absorbance (1cm cell v HPLC water) 270 nm 1Ò Metal can 1260-6687 D/1850/17
Mfr. No 2.5 Ò Glass bottle 1045-8210 D/1850/PB17
240 nm <0.1 A.U. D/1854/PB15 2.5 Ò Coated Glass bottle 1077-4941 D/1850/21
250 nm <0.01 A.U. 5Ò HDPE Plastic bottle 1027-3850 D/1850/PC21
<2 ppm 5Ò HDPE Plastic bottle 1055-0641 D/1850/25
25 Ò Metal drum 1059-0141 D/1850/27
200 Ò Metal drum 1236-1463
<1 ppm
Dichloromethane stabilised with amylene CH2Cl2 ADR/RID: 6.1, III <0.2 ppm
CAS: 75-09-2 EINECS: 200-838-9
extra dry, for synthesis MW: 84.93 UN: 1593 <2 ppm
Density at 20°C: 1.325 GHS: Carc. 2 <2 ppm
Boiling point: 39 to 40 °C H351 <1 ppm
Melting point: -97 °C P281 <0.2 ppm
<2 ppm
packaging Cat. No Assay (CG): >99% <0.5 ppm
1 Ò Coated Glass bottle 1037-5890
ADR/RID: 6.1, III Guaranteed analysis
CH2Cl2 EINECS: 200-838-9
CAS: 75-09-2 UN: 1593 Acidity / Alkalinity <0.001 meq/g Lead (Pb)
MW: 84.93 GHS: Carc. 2 Magnesium (Mg)
Density at 20°C: 1.325 H351 Color <10 APHA Potassium (K)
Boiling point: 39 to 40 °C P281 Sodium (Na)
Melting point: -97 °C Water <0.05% Total phosphorus (P)
<0.01% Residue after evaporation Total silicon (Si)
Guaranteed analysis Residue after evaporation <500 ppm Total sulphur (S)
Zinc (Zn)
Water Substances darkened
by (H2SO4) <25 APHA
Calcium (Ca) <2 ppm
Copper (Cu) <1 ppm
Iron (Fe) <2 ppm
107
D | Dichloromethane
Dichloromethane stabilised with ethanol SLR Diethylamine SLR
specified reagents for general laboratory work- extra pure specified reagents for general laboratory work- extra pure Mfr. No
D/2100/08
packaging Cat. No Mfr. No packaging Cat. No D/2100/17
D/1860/PC21
5 Ò Fluorinated HDPE Plastic bottle 1014-3070 500 mÒ Glass bottle 1025-3900
<500 ppm 2.5 Ò Glass bottle 1040-8600
CH2Cl2 ADR/RID: 6.1, III
CAS: 75-09-2 EINECS: 200-838-9 C4H11N EINECS: 203-716-3
MW: 84.93 UN: 1593 CAS: 109-89-7 UN: 1154
Density at 20°C: 1.325 H351 MW: 73.14 GHS: Flam. Liq. 2, Acute
Boiling point: 39 to 40 °C P281 Density at 20°C: 0.710 Tox. 3, Skin Corr. 1A, Eye Dam. 1
Melting point: -97 °C Boiling point: 55 to 58 °C H225, H314, H332, H302, H311
Melting point: -50 °C P280, P305+P351+P338,
Assay (CG): > 99% Flash point: -23 °C P210, P260, P302+P352, P310
ADR/RID: 3, 8, II
Guaranteed analysis <0.05% Residue after evaporation
Water
Diethanolamine SLR Assay (CG): >99% <20 APHA Potassium (K) <5 ppm
<500 ppm Sodium (Na) <10 ppm
specified reagents for general laboratory work- extra pure Mfr. No Guaranteed analysis Total phosphorus (P)
D/2050/08 <5 ppm Total silicon (Si) <2 ppm
packaging Cat. No D/2050/17 Color <1 ppm Total sulphur (S) <2 ppm
Residue after evaporation <2 ppm Zinc (Zn) <5 ppm
500 mÒ Glass bottle 1013-1470 Calcium (Ca) <1 ppm <5 ppm
2.5 Ò Glass bottle 1072-5521 Copper (Cu) <2 ppm
Iron (Fe) Mfr. No
C4H11NO2 EINECS: 203-868-0 Lead (Pb) D/2250/48
CAS: 111-42-2 UN: 3259 Magnesium (Mg)
MW: 105.14 GHS: Acute Tox. 4, Skin Irrit. Certified AR
Density at 20°C: 1.096 2, Eye Dam. 1, STOT RE 2 Diethylammonium diethyldithiocarbamate
Boiling point: 268 °C H318, H302, H373, H315 Mfr. No
Melting point: 27 to 30 °C P280, P305+P351+P338, pure D/2951/08
Flash point: 179 °C P310, P260, D/2951/17
ADR/RID: 8, III P301+P312, P302+P352 packaging Cat. No
<1 ppm
100 g Plastic jar 1008-0100 <1 ppm
<5 ppm
Assay (CG): >99% <20 APHA Potassium (K) <20 ppm C5H11NS2.C4H11N GHS: Skin Irrit. 2, Eye Irrit. 2, <0.5 ppm
<0.5% Sodium (Na) <50 ppm CAS: 1518-58-7 STOT SE 3 <0.1 ppm
Guaranteed analysis Total phosphorus (P) MW: 222.42 H319, H315, H335 <1 ppm
<20 ppm Total silicon (Si) <2 ppm Melting point: 8185 °C P261, P280, P302+P352, <0.5 ppm
Color <5 ppm Total sulphur (S) <2 ppm EINECS: 216-175-3 P305+P351+P338, P304+P341
Water <5 ppm Zinc (Zn) <5 ppm
Calcium (Ca) <2 ppm <20 ppm Guaranteed analysis
Copper (Cu) <5 ppm
Iron (Fe) Complies with standard IR spectrum: Pass
Lead (Pb)
Magnesium (Mg) Diethylene glycol
for analysis
Diethylamine Certified AR packaging Cat. No
500 mÒ Glass bottle
for analysis Cat. No Mfr. No 2.5 Ò Glass bottle 1032-8090
1044-8020
packaging 1034-5990 D/2110/08 C4H10O3
500 mÒ Glass bottle 1040-8790 D/2110/17 CAS: 111-46-6 Flash point: 143 °C
2.5 Ò Glass bottle MW: 106.12 EINECS: 203-872-2
C4H11N EINECS: 203-716-3 Density at 20°C: 1.11 GHS: Acute Tox. 4, STOT RE 2
CAS: 109-89-7 UN: 1154 Boiling point: 245 °C H302, H373
MW: 73.14 GHS: Flam. Liq. 2, Acute Melting point: -10 °C P280, P301+P310
Density at 20°C: 0.710 Tox. 3, Skin Corr. 1A, Eye Dam. 1
Boiling point: 55 to 58 °C H225, H314, H332, H302, H311 Assay (CG): >99.5% <10 APHA Magnesium (Mg)
Melting point: -50 °C P280, P305+P351+P338, <0.2% Potassium (K)
Flash point: -23 °C P210, P260, P302+P352, P310 Guaranteed analysis Sodium (Na)
ADR/RID: 3, 8, II <0.01% Total phosphorus (P)
Color <2 ppm Total silicon (Si)
Assay (CG): >99.5% Water <0.5 ppm Total sulphur (S)
Residue after ignition <1 ppm Zinc (Zn)
Guaranteed analysis Calcium (Ca) <0.5 ppm
Color Copper (Cu)
Residue after evaporation Iron (Fe)
Calcium (Ca) Lead (Pb)
Copper (Cu)
Iron (Fe) Lot analysis on the label.
Lead (Pb)
Magnesium (Mg) <10 APHA Potassium (K) <0.2 ppm
<100 ppm Sodium (Na) <1 ppm
Typical analysis Total phosphorus (P)
Aluminium (Al) <1 ppm Total silicon (Si) <0.2 ppm
Barium (Ba) <0.05 ppm Total sulphur (S) <0.05 ppm
Cadmium (Cd) Zinc (Zn)
Chromium (Cr) <0.5 ppm <0.5 ppm
Cobalt (Co) <0.05 ppm <0.5 ppm
Lithium (Li)
<0.5 ppm
Lot analysis on the label.
<0.1 ppm Manganese (Mn) <0.05 ppm Read more on page 234
<0.05 ppm Molybdenum (Mo) <0.05 ppm
<0.05 ppm Nickel (Ni) <0.05 ppm
<0.05 ppm Strontium (Sr) <0.05 ppm
<0.05 ppm Titanium (Ti) <0.05 ppm
<0.02 ppm Vanadium (V) <0.05 ppm
108
Diethyl ether | D
Diethylene glycol SLR Absorbance specification
Max. Absorbance (1cm cell v HPLC water)
specified reagents for general laboratory work- extra pure Mfr. No
D/2950/08 205 nm <1 A.U. 250 nm <0.05 A.U.
packaging Cat. No D/2950/17 210 nm <0.3 A.U. 260 nm <0.025 A.U.
D/2950/25 220 nm <0.2 A.U. 270 nm
500 mÒ Glass bottle 1042-8020 230 nm <0.125 A.U. 280 nm <0.01 A.U.
2.5 Ò Glass bottle 1043-8020 240 nm <0.075 A.U. Wavelength at 1 A.U. <0.005 A.U.
25 Ò HDPE Plastic container 1268-8625
Lot analysis on the label. : <205 nM
C4H10O3 Flash point: 143 °C Filtered to 0.2 µm.
CAS: 111-46-6 EINECS: 203-872-2 Primar
MW: 106.12 GHS: Acute Tox. 4, STOT RE 2 Diethyl ether
Density at 20°C: 1.11 H302, H373 Mfr. No
Boiling point: 245 °C P280, P301+P310 for trace metal analysis, stabilised with copper gauze D/2455/17
Melting point: -10 °C
<0.005 ppm
Assay (CG): >99% <30 APHA Potassium (K) <5 ppm packaging Cat. No <0.005 ppm
<0.5% Sodium (Na) <20 ppm
Guaranteed analysis Total phosphorus (P) 2.5 Ò Glass bottle 1061-6452 <0.05 ppm
<10 ppm Total silicon (Si) <2 ppm <0.005 ppm
Color <2 ppm Total sulphur (S) <1 ppm C4H10O EINECS: 200-467-2
Water <5 ppm Zinc (Zn) <5 ppm CAS: 60-29-7 UN: 1155 <0.2 ppm
Calcium (Ca) <2 ppm Residue after ignition <5 ppm MW: 74.12 GHS: Flam. Liq. 1, Acute <0.005 ppm
Copper (Cu) <5 ppm <0.05% Density at 20°C: 0.714 Tox. 4, STOT SE 3 <0.005 ppm
Iron (Fe) Boiling point: 34.6 °C H224, H336, H302,
Lead (Pb) Mfr. No Melting point: -116 °C EUH019, EUH066 <0.02 ppm
Magnesium (Mg) E/1300/17 Flash point: -45 °C P261, P233, P301+P312, <0.02 ppm
ADR/RID: 3, I P210, P240, P243, P403+P235
<0.1 ppm
Assay (CG): >99.9% <0.005 ppm
Guaranteed analysis <0.01 ppm
<5 APHA
Diethylene glycol monoethyl ether Acidity / Alkalinity <0.0002 meq/g Molybdenum (Mo) <0.002%
Nickel (Ni) <1 ppm
pure Color <5 APHA Potassium (K) <0.005%
Propan--1-ol
Water <0.01% Sodium (Na)
Strontium (Sr)
packaging Cat. No Residue after evaporation <2 ppm Titanium (Ti)
2.5 Ò Glass bottle 1036-6420 Total phosphorus (P)
Flash point: 94 °C Acetone <0.002% Total silicon (Si)
C6H14O3 EINECS: 203-919-7 Total sulphur (S)
CAS: 111-90-0 GHS: Acute Tox. 4, Eye Irrit. 2 Aluminium (Al) <0.02 ppm Vanadium (V)
MW: 134.18 H319, H302 Zinc (Zn)
Density at 20°C: 0.990 P301+P312, P280, Barium (Ba) <0.005 ppm Substances darkened
Boiling point: 197 °C P305+P351+P338 by H2SO4
Melting point: -80 °C Cadmium (Cd) <0.005 ppm Ethanol 90 % v/v
<0.05% Ether peroxide
Guaranteed analysis Calcium (Ca) <0.05 ppm Methanol
Water Chromium (Cr) <0.005 ppm
Cobalt (Co) <0.005 ppm
Copper (Cu) <0.01 ppm
Iron (Fe) <0.05 ppm
Lead (Pb) <0.005 ppm
Lithium (Li) <0.005 ppm
Magnesium (Mg) <0.02 ppm
Manganese (Mn) <0.005 ppm
Diethylenetriaminepenta-acetic acid sodium salt Diethyl ether Distol
pure, solution about 40% w/w for residue and pesticide analysis, stabilised with copper gauze
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
D/2350/08 1143-8193 D/2503/15
500 mÒ Glass bottle 1003-0110 1 Ò Glass bottle 1034-4980 D/2503/17
2.5 Ò Glass bottle EINECS: 200-467-2
GHS: Skin Irrit. 2, Eye Irrit. 2, STOT SE 3 UN: 1155 Pass
H315, H319, H335 C4H10O GHS: Flam. Liq. 1, Acute Pass
P280, P302+P352, P304+P341, P305+P351+P338, P261 CAS: 60-29-7 Tox. 4, STOT SE 3
MW: 74.12 H224, H336, H302,
Diethyl ether stabilised with ethanol Certified Density at 20°C: 0.714 EUH019, EUH066
Boiling point: 34.6 °C P261, P233, P301+P312,
for HPLC Melting point: -116 °C P210, P240, P243, P403+P235
Flash point: -45 °C
ADR/RID: 3, I <0.02% GC (FID) Analysis
<2 ppm GC (NPD) analysis
Guaranteed analysis
Pass
Water
Residue after evaporation
GC (ECD) Analysis
packaging Cat. No Mfr. No
D/2506/15
1 Ò Glass bottle 1040-7830 D/2506/17
2.5 Ò Glass bottle 1057-9950 D/2506/PB17
2.5 Ò Coated Glass bottle 1005-0100
<2 ppm
C4H10O EINECS: 200-467-2
CAS: 60-29-7 UN: 1155
MW: 74.12 GHS: Flam. Liq. 1, Acute
Density at 20°C: 0.714 Tox. 4, STOT SE 3
Boiling point: 34.6 °C H224, H336, H302,
Melting point: -116 °C EUH019, EUH066
Flash point: -45 °C P261, P233, P301+P312,
ADR/RID: 3, I P210, P240, P243, P403+P235
Assay (CG): >99%
Guaranteed analysis <0.0002 meq/g Residue after evaporation
<0.02%
Acidity / Alkalinity
Water
109
D | Diethyl ether stabilised with ethanol
Diethyl ether stabilised with ethanol Diethyl ether stabilised with BHT SLR
extra dry, for synthesis specified reagents for general laboratory work- extra pure
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
1004-0100 D/2502/15 D/2400/PB08
1 Ò Glass bottle 1038-4930 D/2502/17 500 mÒ Coated Glass bottle 1056-0721
2.5 Ò Glass bottle EINECS: 200-467-2 2.5 Ò Glass bottle 1026-3230 D/2400/17
UN: 1155 <0.00005% 2.5 Ò Coated Glass bottle 1039-6080 D/2400/PB17
C4H10O GHS: Flam. Liq. 1, Acute 5 Ò Mild steel drum 1232-5203 D/2400/MS21
CAS: 60-29-7 Tox. 4, STOT SE 3 25 Ò Metal drum 1013-1520
MW: 74.12 H224, H336, H302, 200 Ò Metal drum 1036-7214 D/2400/25
Density at 20°C: 0.714 EUH019, EUH066 D/2400/27
Boiling point: 34.6 °C P261, P233, P301+P312, C4H10O EINECS: 200-467-2
Melting point: -116 °C P210, P240, P243, P403+P235 CAS: 60-29-7 UN: 1155 <1 ppm
Flash point: -45 °C MW: 74.12 GHS: Flam. Liq. 1, Acute <2 ppm
ADR/RID: 3, I <0.01% Peroxide Density at 20°C: 0.714 Tox. 4, STOT SE 3 <2 ppm
<2 ppm Boiling point: 34.6 °C H224, H336, H302, <5 ppm
Guaranteed analysis Melting point: -116 °C EUH019, EUH066 <1 ppm
Flash point: -45 °C P261, P233, P301+P312, <1 ppm
Water ADR/RID: 3, I P210, P240, P243, P403+P235 <1 ppm
Residue after evaporation <1 ppm
<10 ppm
Assay (CG): >99%
Guaranteed analysis
Diethyl ether stabilised with BHT Certified AR, Eur.Ph. Acidity / Alkalinity <0.001 meq/g Lead (Pb)
Magnesium (Mg)
for analysis Color <10 APHA Potassium (K)
Sodium (Na)
Water <0.2% Total phosphorus (P)
Total silicon (Si)
packaging Cat. No Mfr. No Residue after evaporation <20 ppm Total sulphur (S)
D/2450/PB08 Zinc (Zn)
500 mÒ Coated Glass bottle 1069-6442 Substances Ether peroxide
1 Ò Glass bottle 1030-6040 D/2450/15
1 Ò Coated Glass bottle 1011-1570 D/2450/PB15 reducing KMnO4 <0.005%
2.5 Ò Glass bottle 1078-5901 Calcium (Ca) <5 ppm
2.5 Ò Coated Glass bottle 1017-1610 D/2450/17
5 Ò Mild steel drum 1198-4691 D/2450/PB17 Copper (Cu) <1 ppm
25 Ò Metal drum 1132-3440 D/2450/MS21
200 Ò Metal drum 1198-7543 Iron (Fe) <2 ppm
D/2450/25
C4H10O EINECS: 200-467-2 D/2450/27 Diethyl ether stabilised with pyrogallol
CAS: 60-29-7 UN: 1155
MW: 74.12 GHS: Flam. Liq. 1, Acute <0.001% pure, for synthesis
Density at 20°C: 0.714 Tox. 4, STOT SE 3 <0.1 ppm
Boiling point: 34.6 °C H224, H336, H302, <0.05 ppm packaging Cat. No Mfr. No
Melting point: -116 °C EUH019, EUH066 <0.2 ppm 1140-8193 D/2500/08
Flash point: -45 °C P261, P233, P301+P312, <0.05 ppm 500 mÒ Glass bottle 1018-2040 D/2500/15
ADR/RID: 3, I P210, P240, P243, P403+P235 <0.002% 1 Ò Glass bottle 1063-5682 D/2500/17
2.5 Ò Glass bottle 1148-3623 D/2500/PB17
Assay (CG): >99.5% <0.01% 2.5 Ò Coated Glass bottle EINECS: 200-467-2
<1 ppm UN: 1155 <0.00005%
Guaranteed analysis <0.01% C4H10O GHS: Flam. Liq. 1, Acute
CAS: 60-29-7 Tox. 4, STOT SE 3
Acidity / Alkalinity <0.0002 meq/g Substances <10 APHA MW: 74.12 H224, H336, H302,
reducing KMnO4 Density at 20°C: 0.714 EUH019, EUH066
Color <5 APHA Total phosphorus (P) <0.01 ppm Boiling point: 34.6 °C P261, P233, P301+P312,
Total silicon (Si) <0.01 ppm Melting point: -116 °C P210, P240, P243, P403+P235
Water <0.03% Total sulphur (S) <0.01 ppm Flash point: -45 °C
Zinc (Zn) <0.05 ppm ADR/RID: 3, I <0.02% Peroxide
Residue after evaporation <10 ppm Acetone <0.01 ppm <20 ppm
Ethanol 90 % v/v <0.01 ppm Guaranteed analysis
Carbonyl compounds : <0.001% Ether peroxide
Methanol Water
Calcium (Ca) <0.2 ppm Substances darkened Residue after evaporation
by H2SO4
Copper (Cu) <0.05 ppm
Manganese (Mn)
Iron (Fe) <0.1 ppm Molybdenum (Mo)
Nickel (Ni)
Lead (Pb) <0.05 ppm Strontium (Sr)
Titanium (Ti)
Magnesium (Mg) <0.05 ppm Vanadium (V)
Potassium (K) <0.5 ppm
Sodium (Na) <0.5 ppm 1.2-Dihydroxyanthraquinone
Typical analysis <0.05 ppm See Alizarin, page 27
<0.01 ppm
Aluminium (Al) <0.01 ppm (3.4-Dihydroxy-2-anthraquinonyl)methylimino-
Barium (Ba) <0.01 ppm diacetic acid dihydrate
Cadmium (Cd) <0.01 ppm
Chromium (Cr) <0.01 ppm See 3-Aminomethylalizarin-NN-diacetic acid, page 32
Cobalt (Co)
Lithium (Li)
Lot analysis on the label.
1.3-Dihydroxybenzene See Resorcinol, page 269
See page 308 for more information
110
1.2-Dimethoxyethane | D
1.2-Dihydroxybenzene-3.5-disulfonic acid, disodium salt Guaranteed analysis
pure, Metal indicator ( Tiron) for Iron and Titanium. Acidity / Alkalinity <0.002 meq/g Magnesium (Mg) <0.2 ppm
Potassium (K) <0.5 ppm
Color <10 APHA Sodium (Na)
Total phosphorus (P) <1 ppm
packaging Cat. No Mfr. No Water <0.1% Total silicon (Si) <0.05 ppm
D/3000/46 Total sulphur (S) <0.05 ppm
25 g Plastic jar 1044-8210 Residue after evaporation <20 ppm Zinc (Zn)
Peroxide <0.2 ppm
Calcium (Ca) <0.5 ppm <0.2 ppm
<0.001%
(OH)2C6H2(SO3Na)2.H2O GHS: Skin Irrit. 2, Eye Irrit. 2, Copper (Cu) <0.05 ppm
CAS: 149-45-1 STOT SE 3 SLR
MW: 332.22 H319, H315, H335 Iron (Fe) <0.1 ppm
Melting point: >300 °C P261, P302+P352, P280,
EINECS: 205-741-5 P305+P351+P338 Lead (Pb) <0.02 ppm
Guaranteed analysis Di-iso-propyl ether stabilised with BHT
Complies with standard IR spectrum: Pass
specified reagents for general laboratory work- extra pure
packaging Cat. No Mfr. No
D/5000/15
1.8-Dihydroxynaphthalene-3.6-disulfonic acid, 1 Ò Glass bottle 1018-1610 D/5000/17
disodium salt dihydrate D/5000/PB17
2.5 Ò Glass bottle 1031-6040 D/5000/21
See Chromotropic acid sodium salt dihydrate formaldehyde determination, page 90 2.5 Ò Coated Glass bottle 1076-7894 D/5000/FP21
5 Ò Fluorinated HDPE Plastic bottle 1032-6040
5 Ò Fluorinated HDPE square Drum 1027-6349 <2 ppm
<5 ppm
di-(2-Hydroxyphenylimino)ethane C6H14O ADR/RID: 3, II <10 ppm
CAS: 108-20-3 EINECS: 203-560-6 <1 ppm
pure, for calcium determination MW: 102.18 UN: 1159 <1 ppm
Density at 20°C: 0.720 GHS: Flam. Liq. 2, STOT SE 3 <2 ppm
Boiling point: 68 °C H225, H336, EUH019, EUH066 <2 ppm
Melting point: -85.5 °C P261, P233, P210, P240
Flash point: -29 °C
packaging Cat. No Mfr. No Assay (CG): >99%
D/3100/45
10 g Plastic jar 1033-8090 Guaranteed analysis
C14H12N2O2 GHS: Skin Irrit. 2, Eye Irrit. 2, Acidity / Alkalinity <0.002 meq/g Magnesium (Mg)
CAS: 1149-16-2 STOT SE 3 Potassium (K)
MW: 240.26 H335, H319, H315 Color <20 APHA Sodium (Na)
Melting point: 201 to 205 °C P261, P302+P352, P280, Total phosphorus (P)
EINECS: 214-560-0 P305+P351+P338 Water <0.2% Total silicon (Si)
Total sulphur (S)
Residue after evaporation <100 ppm Zinc (Zn)
Calcium (Ca) <5 ppm
Guaranteed analysis Copper (Cu) <1 ppm
Complies with standard IR spectrum: Pass
Iron (Fe) <2 ppm
Lead (Pb) <1 ppm
L(+)-Dihydroxysuccinic acid Di-iso-propylnaphthalene SLR
Mfr. No
See (+)-Tartaric acid, page 341 extra pure, mixed isomers D/5010/17
packaging Cat. No Mfr. No
D/3220/46
2.5 Ò Glass bottle 1066-7022
Di-iodomethane SLR C16H20 Boiling point: 290 to 299 °C
CAS: 38640-62-9 Melting point: -47 °C
specified reagents for general laboratory work- extra pure MW: 212.33 EINECS: 254-052-6
packaging Cat. No Mfr. No Dimedone
D/3200/04
25 mÒ Glass bottle 1034-8090 pure
CH2I2 UN: 2810 packaging Cat. No
CAS: 75-11-6 GHS: Acute Tox. 4, Skin Irrit. 25 g Plastic jar 1235-7143
MW: 267.84 2, Eye Irrit. 2, STOT SE 3 C8H12O2 Melting point: 147 to 150 °C
Density at 20°C: 3.32 H302, H312, H319, H332, CAS: 126-81-8 EINECS: 204-804-4
Boiling point: 181 °C H315, H335 MW: 140.18
Melting point: 6 °C P302+P352, P280, P261, : Pass
Flash point: >110 °C P301+P312, P304+P340, Guaranteed analysis
ADR/RID: 6.1, III P305+P351+P338 Identity test
EINECS: 200-841-5
Di-iso-propyl ether stabilised with BHT Certified AR 1.2-Dimethoxyethane SLR
for analysis Mfr. No specified reagents for general laboratory work- extra pure Mfr. No
D/5002/15 D/3280/PB08
packaging Cat. No D/5002/17 packaging Cat. No
D/5002/21
1 Ò Glass bottle 1065-7022 D/5002/25 500 mÒ Coated Glass bottle 1236-7143
2.5 Ò Glass bottle 1036-6180
5 Ò Fluorinated HDPE Plastic bottle 1069-9103 C4H10O2 EINECS: 203-794-9
25 Ò Metal drum 1008-2923 CAS: 110-71-4 UN: 2252
MW: 90.12 GHS: Flam. Liq. 2, Repr. 1B,
C6H14O ADR/RID: 3, II Density at 20°C: 0.867 Acute Tox. 4
CAS: 108-20-3 EINECS: 203-560-6 Boiling point: 84 to 86 °C H225, H332, H360, EUH019
MW: 102.18 UN: 1159 Melting point: -69 °C P201, P308+P313, P233,
Density at 20°C: 0.720 GHS: Flam. Liq. 2, STOT SE 3 Flash point: -6 °C P304+P340, P210
Boiling point: 68 °C H225, H336, EUH019, EUH066 ADR/RID: 3, II
Melting point: -85.5 °C P261, P233, P210, P240
Flash point: -29 °C
Assay (CG): >99% Assay (CG): >99%
111
D | Dimethoxymethane
Dimethoxymethane Dimethylamine
pure pure, solution 40% w/v
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
500 mÒ Glass bottle D/3400/08 D/3450/08
1032-5800 500 mÒ Glass bottle 1237-7143
C3H8O2
CAS: 109-87-5 EINECS: 203-714-2 C2H7N EINECS: 204-697-4
MW: 76.09 UN: 1234 CAS: 124-40-3 UN: 1160
Density at 20°C: 0.859 to 0.862 GHS: Flam. Liq. 2, Skin Irrit. MW: 45.09 GHS: Flam. Liq. 2, Acute
Boiling point: 41 to 42 °C 2, Eye Irrit. 2, STOT SE 3 Density at 20°C: 0.890 Tox. 4, Skin Corr. 1B
Melting point: -105 °C H225, H319, H315, H335 Boiling point: 54 °C H225, H332, H315
Flash point: -18 °C P261, P302+P352, P280, Melting point: -37 °C P210, P280,
ADR/RID: 3, II P305+P351+P338, P210, P240 Flash point: -18 °C P305+P351+P338, P310
ADR/RID: 3, 8, II
N,N-Dimethylacetamide Certified AR
for analysis
packaging Cat. No Mfr. No 4-Dimethylaminobenzaldehyde Certified AR
D/3411/08
500 mÒ Glass bottle 1014-2140 D/3411/17 for analysis Mfr. No
2.5 Ò Glass bottle 1045-7502 D/3411/PB17 D/3600/46
2.5 Ò Coated Glass bottle 1051-0341 packaging Cat. No D/3600/48
<0.5 ppm
C4H9NO ADR/RID: 6.1/III <1 ppm 25 g Plastic jar 1079-5131 <0.005%
CAS: 127-19-5 EINECS: 204-826-4 <5 ppm 100 g Plastic jar 1030-5850 <20 ppm
MW: 87.12 UN: 2810 <2 ppm <20 ppm
Density at 20°C: 0.937 GHS: Repr. 1B, Acute Tox. 4 C9H11NO EINECS: 202-819-0 <50 ppm
Boiling point: 164 to 166 °C H312, H332, H360D <0.05 ppm CAS: 100-10-7 GHS: Acute Tox. 4, Aquatic <10 ppm
Melting point: -20 °C P280, P201, P308+P313, <5 ppm MW: 149.19 Chronic 3
Flash point: 70 °C P304+P340, P302+P352 Boiling point: 176 to 177 °C H412, H302 <0.01%
<0.5 ppm Melting point: 70 to 75 °C P273, P301+P312 Pass
Flash point: 164 °C
Assay (CG): >99.5% SLR
Assay: >99%
Guaranteed analysis <0.02 meq/g Magnesium (Mg) : <0.01% Total chloride (Cl) Mfr. No
<10 APHA Potassium (K) Guaranteed analysis <20 ppm Total phosphorus (P) D/3550/46
Acidity / Alkalinity <0.1% Sodium (Na) Total silicon (Si) D/3550/48
Color <100 ppm Total phosphorus (P) Insoluble in alcohol <5 ppm Total sulphur (S)
Water <2 ppm Total silicon (Si) Calcium (Ca) <5 ppm Zinc (Zn) <500 ppm
Residue after evaporation <1 ppm Total sulphur (S) Copper (Cu) <5 ppm Insoluble Acids <0.02%
Calcium (Ca) <2 ppm Zinc (Zn) Iron (Fe) <10 ppm Bases of indole type
Copper (Cu) <1 ppm Lead (Pb) <50 ppm <100 ppm
Iron (Fe) Magnesium (Mg) <100 ppm <100 ppm
Lead (Pb) Potassium (K) <200 ppm
Sodium (Na)
Lot analysis on the label. <50 ppm
Lot analysis on the label.
N,N-Dimethylacetamide SLR
specified reagents for general laboratory work- extra pure 4-Dimethylaminobenzaldehyde
packaging Cat. No Mfr. No extra pure, Ehrlich’s reagent
D/3410/08
500 mÒ Glass bottle 1038-5890 D/3410/17 packaging Cat. No
2.5 Ò Glass bottle 1078-5131
<2 ppm 25 g Plastic jar 1052-0341
C4H9NO ADR/RID: 6.1/III <5 ppm 100 g Plastic jar 1039-5840
CAS: 127-19-5 EINECS: 204-826-4 <20 ppm
MW: 87.12 UN: 2810 <10 ppm C9H11NO EINECS: 202-819-0
Density at 20°C: 0.937 GHS: Repr. 1B, Acute Tox. 4 <1 ppm CAS: 100-10-7 GHS: Acute Tox. 4, Aquatic
Boiling point: 164 to 166 °C H312, H332, H360D <20 ppm MW: 149.19 Chronic 3
Melting point: -20 °C P280, P201, P308+P313, <5 ppm Boiling point: 176 to 177 °C H412, H302
Flash point: 70 °C P304+P340, P302+P352 Melting point: 70 to 75 °C P273, P301+P312
Flash point: 164 °C
Assay (CG): >99%
Assay: >98%
Guaranteed analysis <0.05 meq/g Magnesium (Mg) <100 ppm Sodium (Na)
<20 APHA Potassium (K) Guaranteed analysis <20 ppm n-Butyl formate
Acidity / Alkalinity <0.5% Sodium (Na) <20 ppm Total phosphorus (P)
Color <500 ppm Total phosphorus (P) Calcium (Ca) <20 ppm Total silicon (Si)
Water <10 ppm Total silicon (Si) Copper (Cu) <50 ppm Total sulphur (S)
Residue after evaporation <5 ppm Total sulphur (S) Iron (Fe) Zinc (Zn)
Calcium (Ca) <10 ppm Zinc (Zn) Lead (Pb) <200 ppm
Copper (Cu) <5 ppm Magnesium (Mg)
Iron (Fe) Potassium (K)
Lead (Pb)
4-Dimethylaminobenzylidenerhodanine
technical
packaging Cat. No Mfr. No
D/3650/44
5 g Glass jar 1005-0120
C12H12N2OS2 Melting point: 285 to 288 °C
CAS: 536-17-4 EINECS: 208-625-2
MW: 264.37
Guaranteed analysis
Complies with standard IR spectrum: Pass
112
Dimethylformamide | D
4-[4-(Dimethylamino)phenylazo]benzene- Dimethyl digol SLR
sulfonic acid, sodium salt
specified reagents for general laboratory work- extra pure
See Methyl orange, page 206
packaging Cat. No Mfr. No
500 mÒ Coated Glass bottle 1002-0110 D/3830/PB08
2-[4-(Dimethylamino)phenylazo]benzoic C6H14O3 ADR/RID: 3, III
acid See Methyl red, page 207 CAS: 111-96-6 EINECS: 203-924-4
MW: 134.18 UN: 3271
Density at 20°C: 0.937 GHS: Flam. Liq. 3, Repr. 1B
Boiling point: 162 °C H226, H360, EUH019
Melting point: -64 °C P201, P308+P313, P233, P210
Flash point: 51 °C
Absorbance specification
Max. Absorbance (1cm cell v HPLC water)
N,N-Dimethylaniline Certified AR Refractive index 1.407 to 1.4085
for analysis
packaging Cat. No Mfr. No Dimethylformamide Cat. No Certified
D/3802/PB05
100 mÒ Coated Glass bottle 1073-5521 D/3802/PB08 for HPLC 1034-6180 Mfr. No
500 mÒ Coated Glass bottle 1026-3900 1035-6180 D/3846/15
<5 ppm packaging 1016-1660 D/3846/17
C8H11N EINECS: 204-493-5 <2 ppm 1268-6687 D/3846/PB17
CAS: 121-69-7 UN: 2253 <0.05 ppm 1 Ò Glass bottle 1260-6697 D/3846/10RSS
MW: 121.18 GHS: Carc. 2, Acute Tox. 3, <5 ppm 2.5 Ò Glass bottle 1269-6687 D/3846/25RSS
Density at 20°C: 0.950 Aquatic Chronic 2 <0.5 ppm 2.5 Ò Coated Glass bottle D/3846/30RSS
Boiling point: 193 to 194 °C H411, H311, H351, H331, H301 10 Ò Returnable Drum UN: 2265
Melting point: 1.5 to 2.5 °C P280, P312, P302+P350, <0.1% 25 Ò Returnable Drum GHS: Repr. 1B, Acute Tox. 4,
Flash point: 63 °C P304+P340, P301+P310, P273 30 Ò Returnable Drum Eye Irrit. 2
ADR/RID: 6.1, II H319, H312, H332, H360D,
C3H7NO H226
Assay (CG): >99% : <0.005% Sodium (Na) CAS: 68-12-2 P301+P310, P302+P352,
<2 ppm Total phosphorus (P) MW: 73.09 P304+P340, P280,
Guaranteed analysis <1 ppm Total silicon (Si) Density at 20°C: 0.945 P305+P351+P338, P210
<2 ppm Total sulphur (S) Boiling point: 153 °C
Insoluble in HCl <1 ppm Zinc (Zn) Melting point: -61 °C
Calcium (Ca) Aniline Flash point: 58 °C
Copper (Cu) <0.5 ppm ADR/RID: 3, III
Iron (Fe) <1 ppm EINECS: 200-679-5
Lead (Pb)
Magnesium (Mg) Guaranteed analysis
Potassium (K)
Acidity / Alkalinity <0.001 meq/g Residue after evaporation <10 ppm
Water <0.05%
320 nm <0.02 A.U.
Absorbance specification 340 nm <0.015 A.U.
Max. Absorbance (1cm cell v HPLC water) 350 nm <0.005 A.U.
1.4-Dimethylbenzene See p-Xylene, page 371 270 nm <0.5 A.U.
280 nm <0.15 A.U.
290 nm (sol. aqu. 1%) : <0.05 A.U.
Lot analysis on the label.
Filtered to 0.2 µm.
1.3-Dimethylbenzene See m-Xylene, page 371
Dimethylformamide Certified
for Gel Permeation Chromatography (GPC)
1.2-Dimethylbenzene See o-Xylene, page 371 packaging Cat. No Mfr. No
D/3847/PB17
5.5-Dimethyl-1.3-cyclohexanedione 2.5 Ò Coated Glass bottle 1074-4561
See Dimedone, page 111 C3H7NO UN: 2265
CAS: 68-12-2 GHS: Repr. 1B, Acute Tox. 4,
MW: 73.09 Eye Irrit. 2
Density at 20°C: 0.945 H319, H312, H332, H360D,
Boiling point: 153 °C H226
Melting point: -61 °C P301+P310, P302+P352,
Flash point: 58 °C P304+P340, P280,
ADR/RID: 3, III P305+P351+P338, P210
EINECS: 200-679-5
Dimethyldichlorosilane Guaranteed analysis <10 APHA Residue after evaporation <10 ppm
Color <0.05%
pure Water
packaging Cat. No Mfr. No
D/3820/PB05
100 mÒ Coated Glass bottle 1049-8590 D/3820/PB07
250 mÒ Coated Glass bottle 1063-6642
C2H6Cl2Si EINECS: 200-901-0
CAS: 75-78-5 UN: 1162
MW: 129.06 GHS: Flam. Liq. 2, Skin Irrit.
Density at 20°C: 1.06 2, Eye Irrit. 2, STOT SE 3
Boiling point: 70 °C H225, H335, H315, H319
Melting point: -76 °C P304+P340, P261,
Flash point: -9 °C P302+P352, P280,
ADR/RID: 3, 8, II P305+P351+P338, P210, P240
113
D | Dimethylformamide
Dimethylformamide Cat. No Mfr. No Typical analysis <0.2 ppm Manganese (Mn) <0.05 ppm
D/3848/PB17 <0.1 ppm Molybdenum (Mo) <0.05 ppm
for peptide synthesis 1074-4751 Aluminium (Al) <0.05 ppm Nickel (Ni) <0.05 ppm
Barium (Ba) <0.05 ppm Strontium (Sr) <0.05 ppm
packaging UN: 2265 Cadmium (Cd) <0.05 ppm Titanium (Ti) <0.05 ppm
2.5 Ò Coated Glass bottle GHS: Repr. 1B, Acute Tox. 4, Chromium (Cr) <0.05 ppm Vanadium (V) <0.05 ppm
Eye Irrit. 2 Cobalt (Co)
C3H7NO H319, H312, H332, H360D, Lithium (Li)
CAS: 68-12-2 H226
MW: 73.09 P301+P310, P302+P352, Lot analysis on the label.
Density at 20°C: 0.945 P304+P340, P280,
Boiling point: 153 °C P305+P351+P338, P210 Dimethylformamide SLR
Melting point: -61 °C
Flash point: 58 °C specified reagents for general laboratory work- extra pure
ADR/RID: 3, III
EINECS: 200-679-5
Assay (CG): >99.8% <0.0003 meq/g Dimethylamine : <10 ppm packaging Cat. No Mfr. No
<0.03% D/3840/08
Guaranteed analysis Mfr. No 500 mÒ Glass bottle 1005-0110 D/3840/15
Acidity / Alkalinity D/3842/15 1 Ò Glass bottle 1075-7894 D/3840/17
Water D/3842/17 2.5 Ò Glass bottle 1074-5521 D/3840/PB17
D/3842/PB17 2.5 Ò HDPE Plastic bottle 1004-0110 D/3840/21
packed under nitrogen 5 Ò HDPE Plastic bottle 1012-1520 D/3840/25
25 Ò HDPE Plastic container 1042-8790 D/3840/27
Dimethylformamide Cat. No 200 Ò HDPE Plastic container 1193-7583
<2 ppm
extra dry, for synthesis 1042-8980 C3H7NO UN: 2265 <5 ppm
1044-8980 CAS: 68-12-2 GHS: Repr. 1B, Acute Tox. 4, <50 ppm
packaging 1077-5901 MW: 73.09 Eye Irrit. 2 <2 ppm
Density at 20°C: 0.945 H319, H312, H332, H360D, <1 ppm
1 Ò Glass bottle UN: 2265 Boiling point: 153 °C H226 <5 ppm
2.5 Ò Glass bottle GHS: Repr. 1B, Acute Tox. 4, Melting point: -61 °C P301+P310, P302+P352, <2 ppm
2.5 Ò Coated Glass bottle Eye Irrit. 2 Flash point: 58 °C P304+P340, P280,
H319, H312, H332, H360D, ADR/RID: 3, III P305+P351+P338, P210
C3H7NO H226 EINECS: 200-679-5
CAS: 68-12-2 P301+P310, P302+P352,
MW: 73.09 P304+P340, P280, Assay (CG): >99%
Density at 20°C: 0.945 P305+P351+P338, P210
Boiling point: 153 °C Guaranteed analysis
Melting point: -61 °C
Flash point: 58 °C Acidity / Alkalinity <0.005 meq/g Magnesium (Mg)
ADR/RID: 3, III Potassium (K)
EINECS: 200-679-5 Color <20 APHA Sodium (Na)
Total phosphorus (P)
Water <0.2% Total silicon (Si)
Total sulphur (S)
Residue after evaporation <50 ppm Zinc (Zn)
Calcium (Ca) <5 ppm
Copper (Cu) <2 ppm
Iron (Fe) <5 ppm
Lead (Pb) <2 ppm
Guaranteed analysis <0.02% Residue after evaporation <20 ppm
Water
Dimethylglyoxime
Certified AR
for analysis
Dimethylformamide Cat. No Certified AR packaging Cat. No Mfr. No
100 g Plastic jar D/3900/48
for analysis 1019-1560 Mfr. No 1068-6252
1056-0911 D/3841/08 C4H8N2O2 <20 ppm
packaging 1028-4140 D/3841/15 CAS: 95-45-4 UN: 1325 <50 ppm
1027-3230 D/3841/17 MW: 116.12 GHS: Flam. Sol. 2, Acute Tox. 4 <20 ppm
500 mÒ Glass bottle 1148-3883 D/3841/PB17 Melting point: 239 to 241 °C H228, H332, H302, H312 <10 ppm
1 Ò Glass bottle 1263-3356 D/3841/21 ADR/RID: 4.1, III P280, P302+P352, <50 ppm
2.5 Ò Glass bottle 1029-4140 D/3841/24 EINECS: 202-420-1 P301+P312, P304+P340,
2.5 Ò Coated Glass bottle 1241-7760 D/3841/25 P233, P210 <5 ppm
5 Ò HDPE Plastic bottle D/3841/27 Assay: >98%
10 Ò HDPE Plastic container UN: 2265 : <0.01% Potassium (K)
25 Ò HDPE Plastic container GHS: Repr. 1B, Acute Tox. 4, Guaranteed analysis <10 ppm Sodium (Na)
200 Ò HDPE Plastic container Eye Irrit. 2 Insoluble in alcohol Total phosphorus (P)
H319, H312, H332, H360D, Calcium (Ca) <5 ppm Total silicon (Si)
C3H7NO H226 Copper (Cu) <5 ppm Total sulphur (S)
CAS: 68-12-2 P301+P310, P302+P352, Iron (Fe) <2 ppm Zinc (Zn)
MW: 73.09 P304+P340, P280, Lead (Pb) <5 ppm
Density at 20°C: 0.945 P305+P351+P338, P210 Magnesium (Mg)
Boiling point: 153 °C
Melting point: -61 °C Lot analysis on the label.
Flash point: 58 °C
ADR/RID: 3, III
EINECS: 200-679-5
Assay (CG): >99.5%
Guaranteed analysis A full list of our products can
be found on page 323.
Acidity / Alkalinity <0.0005 meq/g Magnesium (Mg) <0.5 ppm
Potassium (K) <0.5 ppm
Color <10 APHA Sodium (Na)
Total phosphorus (P) <2 ppm
Water <0.05% Total silicon (Si) <0.5 ppm
Total sulphur (S) <0.05 ppm
Residue after evaporation <20 ppm Zinc (Zn)
<1 ppm
Calcium (Ca) <1 ppm <0.5 ppm
Copper (Cu) <0.5 ppm
Iron (Fe) <1 ppm
Lead (Pb) <0.5 ppm
114
Dimethyl sulfoxide | D
Dimethylglyoxime Dimethyl sulfoxide
pure for Gel Permeation Chromatography (GPC)
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
2.5 Ò Coated Glass bottle D/4127/PB17
25 g Plastic jar 1140-8213 D/3898/46 1000-0120
100 g Plastic jar 1023-3760 D/3898/48 (CH3)2SO
CAS: 67-68-5 Boiling point: 189 °C
C4H8N2O2 UN: 1325 MW: 78.13 Melting point: 18.4 °C
CAS: 95-45-4 GHS: Flam. Sol. 2, Acute Tox. 4 Density at 20°C: 1.1 Flash point: 87 °C
MW: 116.12 H228, H332, H302, H312 EINECS: 200-664-3
Melting point: 239 to 241 °C P280, P302+P352, Guaranteed analysis
ADR/RID: 4.1, III P301+P312, P304+P340, Color <10 APHA Residue after evaporation <10 ppm
EINECS: 202-420-1 P233, P210 Water <0.05%
Guaranteed analysis
Complies with standard IR spectrum: Pass
Dimethyl sulfoxide
for amino acid analysis
Dimethylglyoxime sodium salt packaging Cat. No Mfr. No
2.5 Ò Coated Glass bottle D/4128/PB17
pure (CH3)2SO 1036-5890
CAS: 67-68-5
packaging Cat. No Mfr. No MW: 78.13 Boiling point: 189 °C
D/3950/50 Density at 20°C: 1.1 Melting point: 18.4 °C
250 g Plastic jar 1041-7830 Flash point: 87 °C
Assay (CG): >99.5% EINECS: 200-664-3
C4H6N2Na2O2.8H2O GHS: Skin Irrit. 2, Eye Irrit. 2 Guaranteed analysis <5 APHA Transmission to 550 nm : >98%
CAS: 75006-64-3 H315, H319 Color : >98%
MW: 304.22 P302+P352, P280, Transmission to 400 nm
EINECS: 262-523-2 P305+P351+P338
Guaranteed analysis
Complies with standard IR spectrum: Pass
Dimethyl sulfoxide Certified AR
for analysis
packaging Cat. No Mfr. No
D/4121/PB08
Dimethyl phthalate SLR 500 mÒ HDPE Plastic bottle 1021-3810 D/4121/PB15
Mfr. No 1Ò HDPE Plastic bottle 1020-6581 D/4121/PB17
specified reagents for general laboratory work- extra pure D/4050/08 2.5 Ò HDPE Plastic bottle 1016-2090
D/4050/17 5Ò HDPE Plastic bottle 1140-3893 D/4121/21
packaging Cat. No 10 Ò HDPE Plastic container 1019-4423 D/4121/24
500 mÒ Glass bottle 1036-4980 <0.02% 25 Ò HDPE Plastic container 1031-8153 D/4121/25
2.5 Ò Glass bottle 1141-8213
Boiling point: 282 °C (CH3)2SO Boiling point: 189 °C <0.02 ppm
C10H10O4 Melting point: 2 °C CAS: 67-68-5 Melting point: 18.4 °C <0.05 ppm
CAS: 131-11-3 Flash point: 150 °C MW: 78.13 Flash point: 87 °C
MW: 194.19 EINECS: 205-011-6 Density at 20°C: 1.1 EINECS: 200-664-3 <0.5 ppm
Density at 20°C: 1.19 <2 ppm
<0.001 meq/g Residue after ignition Assay (CG): >99.9%
Guaranteed analysis <0.15% <0.1 ppm
Guaranteed analysis <0.02 ppm
Acidity
Water Acidity / Alkalinity <0.0002 meq/g Lead (Pb) <0.2 ppm
Magnesium (Mg)
Color <10 APHA Potassium (K) <0.02 ppm
Sodium (Na) <0.02 ppm
Water <0.05% Total phosphorus (P)
Total silicon (Si) <0.1 ppm
Residue after evaporation <50 ppm Zinc (Zn) <0.02 ppm
<0.02 ppm
Calcium (Ca) <1 ppm <0.02 ppm
Copper (Cu) <0.05 ppm
Dimethyl sulfoxide Certified Iron (Fe) <0.5 ppm
for HPLC Typical analysis <0.1 ppm Manganese (Mn)
<0.02 ppm Molybdenum (Mo)
packaging Cat. No Mfr. No Aluminium (Al) <0.02 ppm Nickel (Ni)
Barium (Ba) <0.05 ppm Strontium (Sr)
250 mÒ Coated Glass bottle 1050-0151 D/4125/PB07 Cadmium (Cd) <0.02 ppm Titanium (Ti)
500 mÒ Coated Glass bottle 1012-2140 D/4125/PB08 Chromium (Cr) <0.02 ppm Vanadium (V)
2.5 Ò Coated Glass bottle 1038-7791 D/4125/PB17 Cobalt (Co)
10 Ò Returnable Drum 1261-6697 D/4125/10RSS Lithium (Li)
25 Ò Returnable Drum 1262-6697 D/4125/25RSS
30 Ò Returnable Drum 1264-6697 D/4125/30RSS Lot analysis on the label.
(CH3)2SO Boiling point: 189 °C
CAS: 67-68-5 Melting point: 18.4 °C
MW: 78.13 Flash point: 87 °C
Density at 20°C: 1.1 EINECS: 200-664-3
Assay (CG): >99%
Guaranteed analysis <0.0008 meq/g Residue after evaporation <10 ppm
<0.05%
Acidity / Alkalinity
Water
Absorbance specification
Max. Absorbance (1cm cell v HPLC water)
270 nm <0.5 A.U. 290 nm (sol. aqu. 1%) : <0.1 A.U. Read more page 24
280 nm <0.3 A.U. 320 nm <0.05 A.U.
290 nm <0.2 A.U. 360 nm <0.01 A.U.
Lot analysis on the label.
Filtered to 0.2 µm.
115
D | Dimethyl sulfoxide
Dimethyl sulfoxide SLR 1.4-Dioxane stabilised with BHT
specified reagents for general laboratory work- extra pure extra dry, for synthesis
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
500 mÒ HDPE Plastic bottle 1008-0110 D/4120/PB08 1 Ò Coated Glass bottle 1054-0531 D/4551/PB15
2.5 Ò HDPE Plastic bottle 1029-3800 D/4120/PB17 2.5 Ò Coated Glass bottle 1015-1470 D/4551/PB17
5Ò HDPE Plastic bottle 1030-5800
25 Ò HDPE Plastic container 1058-9950 D/4120/21 C4H8O2 EINECS: 204-661-8
D/4120/25 CAS: 123-91-1 UN: 1165
Boiling point: 189 °C MW: 88.11 GHS: Flam. Liq. 2, Carc. 2,
(CH3)2SO Melting point: 18.4 °C Density at 20°C: 1.034 Eye Irrit. 2, STOT SE 3
CAS: 67-68-5 Flash point: 87 °C Boiling point: 101 °C H225, H319, H351, H335,
MW: 78.13 EINECS: 200-664-3 Melting point: 12 °C EUH019, EUH066
Density at 20°C: 1.1 Flash point: 12 °C P281, P261, P233, P280,
ADR/RID: 3, II P305+P351+P338, P210
Assay (CG): >99%
Guaranteed analysis
Acidity / Alkalinity <0.0005 meq/g Lead (Pb) <1 ppm
Magnesium (Mg) <1 ppm
Color <20 APHA Potassium (K) <2 ppm Guaranteed analysis
Sodium (Na) <10 ppm Water
Water <0.2% Total phosphorus (P) <1 ppm <0.01% Residue after evaporation <2 ppm
Total silicon (Si) <1 ppm
Residue after evaporation <200 ppm Zinc (Zn) <1 ppm
Calcium (Ca) <5 ppm
Copper (Cu) <1 ppm
Iron (Fe) <5 ppm 1.4-Dioxane stabilised with BHT Certified AR
for analysis
packaging Cat. No Mfr. No
Dimidium bromide-disulfine Cat. No SLR 500 mÒ Glass bottle 1141-3733 D/4550/08
1028-3850 1Ò Glass bottle 1014-1470 D/4550/15
extra pure, indicator stock solution Mfr. No 1Ò Coated Glass bottle 1000-0712 D/4550/PB15
D/4140/05 2.5 Ò Coated Glass bottle 1008-0120 D/4550/PB17
packaging 25 Ò Metal drum 1065-1711 D/4550/25
100 mÒ Glass bottle
Density at 20°C: 1.0 C4H8O2 EINECS: 204-661-8
Boiling point: 100 °C CAS: 123-91-1 UN: 1165
Melting point: 0 °C MW: 88.11 GHS: Flam. Liq. 2, Carc. 2,
Density at 20°C: 1.034 Eye Irrit. 2, STOT SE 3
Herring DE, Lab.Practice 1962.11.113 Boiling point: 101 °C H225, H319, H351, H335,
Melting point: 12 °C EUH019, EUH066
Flash point: 12 °C P281, P261, P233, P280,
ADR/RID: 3, II P305+P351+P338, P210
Dioctyl sulfosuccinate sodium salt, Aerosol® OT-100 Assay (CG): >99.8%
pure Guaranteed analysis
packaging Cat. No Mfr. No Acidity / Alkalinity <0.002 meq/g Magnesium (Mg) <0.05 ppm
A/1040/53 Potassium (K) <0.1 ppm
500 g Plastic jar 1001-0000 Color <10 APHA Sodium (Na) <0.5 ppm
Total phosphorus (P) <0.1 ppm
C20H37O7SNa GHS: Skin Irrit. 2, Eye Dam. 1 Water <0.05% Total silicon (Si)
CAS: 577-11-7 H315, H318 Total sulphur (S) <0.05 ppm
MW: 444.55 P261, P301+P312, Residue after evaporation <20 ppm Zinc (Zn) <0.2 ppm
Melting point: 153 to 157 °C P302+P352, P280, Acetal <0.2 ppm
EINECS: 209-406-4 P305+P351+P338 Calcium (Ca) <0.5 ppm <0.005%
Copper (Cu) <0.02 ppm <0.02 ppm
<0.02 ppm
Iron (Fe) <0.2 ppm <0.02 ppm
Lead (Pb) <0.05 ppm <0.1 ppm
<0.02 ppm
1.4-Dioxane stabilised with BHT Certified Typical analysis <0.1 ppm Manganese (Mn) <0.02 ppm
<0.02 ppm Molybdenum (Mo) <0.02 ppm
for HPLC Mfr. No Aluminium (Al) <0.05 ppm Nickel (Ni)
D/4556/PB15 Barium (Ba) <0.02 ppm Selenium (Se) SLR
packaging Cat. No D/4556/PB17 Cadmium (Cd) <0.02 ppm Strontium (Sr)
Chromium (Cr) <0.02 ppm Titanium (Ti) Mfr. No
1 Ò Coated Glass bottle 1054-0721 Cobalt (Co) <0.02 ppm Vanadium (V) D/4500/08
2.5 Ò Coated Glass bottle 1011-1520 Tin (Sn) D/4500/PB17
Lithium (Li) D/4500/21
C4H8O2 EINECS: 204-661-8 D/4500/25
CAS: 123-91-1 UN: 1165 Slow moving peroxide content depending on the length of storage D/4500/27
MW: 88.11 GHS: Flam. Liq. 2, Carc. 2, Lot analysis on the label.
Density at 20°C: 1.034 Eye Irrit. 2, STOT SE 3
Boiling point: 101 °C H225, H319, H351, H335, 1.4-Dioxane stabilised with BHT
Melting point: 12 °C EUH019, EUH066
Flash point: 12 °C P281, P261, P233, P280, specified reagents for general laboratory work- extra pure
ADR/RID: 3, II P305+P351+P338, P210
packaging Cat. No
Assay (CG): >99.5% 500 mÒ Glass bottle 1006-0120
2.5 Ò Coated Glass bottle 1047-8400
Guaranteed analysis 5Ò Fluorinated HDPE Plastic bottle 1011-2190
Water 25 Ò Metal drum 1007-0120
200 Ò Metal drum 1263-6697
<0.025% Residue after evaporation <2 ppm C4H8O2 EINECS: 204-661-8
CAS: 123-91-1 UN: 1165
Absorbance specification 250 nm <0.075 A.U. MW: 88.11 GHS: Flam. Liq. 2, Carc. 2,
Max. Absorbance (1cm cell v HPLC water) 260 nm <0.05 A.U. Density at 20°C: 1.034 Eye Irrit. 2, STOT SE 3
270 nm <0.03 A.U. Boiling point: 101 °C H225, H319, H351, H335,
218 nm <1 A.U. Wavelength at 1 A.U. : <218 nM Melting point: 12 °C EUH019, EUH066
220 nm <0.4 A.U. Flash point: 12 °C P281, P261, P233, P280,
230 nm <0.22 A.U. ADR/RID: 3, II P305+P351+P338, P210
240 nm <0.125 A.U.
Lot analysis on the label.
Filtered to 0.2 µm.
116
Dithio-oxamide | D
Assay (CG): >99% 1.5-Diphenylcarbazone SLR
Guaranteed analysis specified reagents for general laboratory work- extra pure Mfr. No
D/4850/45
Acidity / Alkalinity <0.005 meq/g Magnesium (Mg) <1 ppm
Potassium (K) <1 ppm
Color <20 APHA Sodium (Na) <5 ppm packaging Cat. No
Total phosphorus (P) <1 ppm
Water <0.2% Total silicon (Si) <1 ppm 10 g Glass jar 1057-0911
Total sulphur (S) <2 ppm
Residue after evaporation <200 ppm Zinc (Zn) <2 ppm C13H12N4O GHS: Flam. Sol. 2, Acute
CAS: 538-62-5 Tox. 4, Skin Irrit. 2, Eye Irrit.
Calcium (Ca) <2 ppm Certified AR MW: 240.27 2, STOT SE 3
Melting point: 153 to 157 °C H228, H319, H335, H315, H302
Copper (Cu) <1 ppm ADR/RID: 4.1, III P261, P301+P312,
EINECS: 208-698-0 P302+P352, P280,
Iron (Fe) <2 ppm UN: 1325 P305+P351+P338, P233
Lead (Pb) <1 ppm
Guaranteed analysis
Complies with standard IR spectrum: Pass
Diphenylamine Conforming to the IR spectrum of reference.
Reagent for the analysis of mercury.
for analysis
packaging Cat. No Mfr. No
100 g Glass jar 1029-3180 D/4700/48 2.5-Diphenyloxazole
250 g Glass jar 1075-5711
D/4700/50 pure, Scintillation counting
C12H11N UN: 2811
CAS: 122-39-4 GHS: Acute Tox. 3, STOT RE packaging Cat. No Mfr. No
MW: 169.23 2, Aquatic Acute 1, Aquatic
Boiling point: 302 °C Chronic 1 100 g Plastic jar 1030-6090 D/4865/48
Melting point: 52 to 54 °C H331, H311, H373, H410, H301 5 kg Plastic keg 1269-8625 D/4865/65
Flash point: 152 °C P280, P302+P350, 25 kg Plastic keg 1265-6697 D/4865/70
ADR/RID: 6.1, III P304+P340, P301+P312,
EINECS: 204-539-4 P260, P273 C15H11NO Boiling point: 360 °C
CAS: 92-71-7 Melting point: 70 to 72 °C
MW: 221.26 EINECS: 202-181-3
Density at 20°C: 1.06 P262
Assay (CG): >99%
Guaranteed analysis
Minimum sensitivity to nitrates test : Pass Potassium (K) <20 ppm 2.2’-Dipyridyl Certified AR
Sodium (Na) <50 ppm
Calcium (Ca) <10 ppm Total phosphorus (P) <10 ppm for analysis
Total silicon (Si) <10 ppm
Copper (Cu) <2 ppm Total sulphur (S) <20 ppm packaging
Zinc (Zn) <10 ppm 5 g Plastic jar
Iron (Fe) <5 ppm Aniline Cat. No Mfr. No
<0.01% C10H8N2 D/5051/44
Lead (Pb) <2 ppm CAS: 366-18-7 1044-9170
Mfr. No MW: 156.19
Magnesium (Mg) <5 ppm D/4600/48 Boiling point: 272 to 273 °C UN: 2811
Melting point: 69 to 72 °C GHS: Acute Tox. 3, Skin Irrit.
Nitrate (NO3) Pass Flash point: 121 °C 2, Eye Irrit. 2, STOT SE 3
ADR/RID: 6.1, II H335, H312, H319, H315,
Diphenylamine EINECS: 206-674-4 H332, H301
P301+P310, P280,
pure, redox indicator Assay: >99.5% P302+P352, P261,
P304+P340, P305+P351+P338
packaging Lot analysis on the label.
Cat. No
100 g Glass jar Dithio-oxamide
1074-5711
C12H11N pure
CAS: 122-39-4 UN: 2811
MW: 169.23 GHS: Acute Tox. 3, STOT RE packaging Cat. No Mfr. No
Boiling point: 302 °C 2, Aquatic Acute 1, Aquatic D/5150/46
Melting point: 52 to 54 °C Chronic 1 25 g Plastic jar 1036-4930
Flash point: 152 °C H331, H311, H373, H410, H301
ADR/RID: 6.1, III P280, P302+P350, (CS.NH2)2 2, Eye Irrit. 2, STOT SE 3
EINECS: 204-539-4 P304+P340, P301+P312, CAS: 79-40-3 H302, H315, H335, H319
P260, P273 MW: 120.20 P261, P301+P312,
Melting point: 170 °C P302+P352, P280,
EINECS: 201-203-9 P305+P351+P338
GHS: Acute Tox. 4, Skin Irrit.
Guaranteed analysis
Complies with standard IR spectrum: Pass
1.5-Diphenylcarbazide SLR
specified reagents for general laboratory work- extra pure
packaging Cat. No Mfr. No
D/4750/46
25 g Plastic jar 1036-5940
Find out more on page 308
C13H14N4O 2, Eye Irrit. 2, STOT SE 3
CAS: 140-22-7 H335, H315, H319, H302
MW: 242.28 P261, P301+P312,
Melting point: 173 to 176 °C P302+P352, P280,
EINECS: 205-403-7 P305+P351+P338
GHS: Acute Tox. 4, Skin Irrit.
Guaranteed analysis
Complies with standard IR spectrum: Pass
Suitable for the determination of Chromium.
117
D | Dithiothreitol
Dithiothreitol 1-Dodecanesulfonic acid sodium salt Certified
for peptide sequencing. Cleland’s reagent. for Ion pair chromatography Mfr. No
D/5296/44
packaging Cat. No Mfr. No packaging Cat. No
1 g Vial 1063-5872 D/P351/43 5 g Plastic jar 1067-6252
5 g Plastic jar 1037-5600 D/P351/44
C12H25NaO3S Melting point: >300 °C
C4H10O2S2 GHS: Acute Tox. 4, Skin Irrit. CAS: 2386-53-0 EINECS: 219-200-6
CAS: 3483-12-3 2, Eye Irrit. 2, STOT SE 3 MW: 272.38
MW: 154.24 H302, H335, H319, H315
Boiling point: 125 to 130 °C P261, P301+P312, Assay: >98%
Melting point: 38 to 43 °C P302+P352, P280,
Flash point: >110 °C P305+P351+P338 Absorbance specification
EINECS: 222-468-7 Max. Absorbance (1cm cell v HPLC water)
254 nm (sol. aqu. 0.005 M) : <0.05 A.U.
Absorbance specification Lot analysis on the label.
Max. Absorbance (1cm cell v HPLC water)
283 nm (sol. aqu. 0.02 M) : <0.04 A.U.
Use to disrupt disulfide bridge in order to maximise protein denaturation and facili-
tate deterging binding.
Dodecanoic acid See Lauric acid, page 177
DMF See Dimethylformamide, page 113
DMSO See Dimethyl sulfoxide, page 116 Dodecanoyl peroxide See di-Lauroyl peroxide, page 177
n-Dodecane SLR Dodecyl Sodium Sulfate
Mfr. No
specified reagents for general laboratory work- extra pure D/5290/05 See Sodium dodecyl sulfate, page 290
D/5290/17
packaging Cat. No Dodecyl trimethyl ammonium bromide Certified
Certified Mfr. No
100 mÒ Glass bottle 1014-2090 Mfr. No for Ion pair chromatography
2.5 Ò Glass bottle 1031-8393 D/5311/46
D/5297/44 packaging Cat. No
C12H26 ADR/RID: 6.1, III Mfr. No
CAS: 112-40-3 EINECS: 203-967-9 25 g Plastic jar 1069-6252 D/5319/05
MW: 170.34 UN: 2810
Density at 20°C: 0.753 GHS: Acute Tox. 4, Asp. Tox. 1 C15H34BrN 2, Eye Irrit. 2, STOT SE 3
Boiling point: 215 to 217 °C H304, H332, EUH066 CAS: 1119-94-4 H335, H315, H302, H319
Melting point: -12 °C P310, P304+P340, MW: 308.35 P261, P301+P312,
Flash point: 71 °C P301+P310, P331 Melting point: 246 °C P302+P352, P280,
EINECS: 214-290-3 P305+P351+P338
Assay (CG): >95% GHS: Acute Tox. 4, Skin Irrit.
1-Dodecanesulfonic acid sodium salt
for Ion pair chromatography for electrochemical detection.
packaging Cat. No Assay: >98%
5 g Plastic jar 1065-9803 Absorbance specification
Max. Absorbance (1cm cell v HPLC water)
C12H25NaO3S Melting point: >300 °C
CAS: 2386-53-0 EINECS: 219-200-6 254 nm <0.05 A.U.
MW: 272.38
Assay: >98% Lot analysis on the label.
Guaranteed analysis Pass
Electrochemical test
Absorbance specification DPX mounting medium
Max. Absorbance (1cm cell v HPLC water)
For microscopy
254 nm (sol. aqu. 0.005 M) : <0.05 A.U.
Lot analysis on the label. packaging Cat. No
EC Specification: 100 mÒ Glass bottle 1005-0080
tested by HPLC-EC to ensure low electrochemical response.
Detector - ESA Coulochem II Flash point: 24 °C Aquatic Acute 1
Mode-Oxidative ADR/RID: 3, III H226, H312, H332, H315,
Electrode graphite UN: 1307 H400, H360Df
GHS: Flam. Liq. 3, Repr. 1B, P280, P302+P350,
Acute Tox. 4, Skin Irrit. 2, P304+P340, P210, P201, P273
See page 308 for more information Guaranteed analysis : Pass
Identity test
118
Ethanal | E
Dysprosium standard metal solution 1000 ppm Erbium standard metal solution 10 000 ppm
for ICP solution in HNO3 2%, NIST certified for ICP solution in HNO3 5%, NIST certified
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
100 mÒ Plastic bottle 100 mÒ Plastic bottle
500 mÒ Plastic bottle 1195-9512 SPPLDY22Y 500 mÒ Plastic bottle 1044-6752 SPPLER23Y
1194-9512 SPPLDY22X 1198-9512 SPPLER23X
H315, H319 H314
Manufactured to a tolerance of ± 0.5%. Manufactured to a tolerance of ± 0.5%.
All standards are manufactured from acids, metals & metal salts and contain less All standards are manufactured from acids, metals & metal salts and contain less
than <10 ppm total metal impurites. than <10 ppm total metal impurites.
See also the full range in the Standard Elemental solution for Trace metal analysis See also the full range in the Standard Elemental solution for Trace metal analysis
section see page 314. section see page 314.
Check with your local distributor for availability of Spex product Check with your local distributor for availability of Spex product
EDTA, Tris-Borate See Tris-Borate-EDTA buffer, page 361 Eriochrome black T C.I. 14645
EGTA See 1, page 103 pure, Metal indicator
Ehrlich’s Reagent packaging Cat. No Mfr. No
E/0100/46
See 4-Dimethylaminobenzaldehyde, page 112 25 g Glass jar 1079-3981 E/0100/48
100 g Glass jar 1046-7060
Mfr. No
C20H12N3NaO7S GHS: Eye Irrit. 2 E/0200/46
CAS: 1787-61-7 H319
MW: 461.38 P280, P305+P351+P338 Mfr. No
EINECS: 217-250-3 E/0250/46
Guaranteed analysis Certified AR
Complies with standard IR spectrum: Pass Mfr. No
1.2-Epoxypropane SLR Eriochrome blue-black R C.I. 15705 E/0300/53
<50 ppm
specified reagents for general laboratory work- extra pure Mfr. No pure, Metal indicator <20 ppm
E/0050/PB08 <50 ppm
packaging Cat. No E/0050/PB17 packaging Cat. No <50 ppm
<50 ppm
500 mÒ Coated Glass bottle 1023-4290 25 g Glass jar 1035-6420
2.5 Ò Coated Glass bottle 1006-0140 33-35%
CAS: 2538-85-4 H315, H335, H319
C3H6O GHS: Flam. Liq. 1, Carc. 1B, EINECS: 219-810-2 P261, P302+P352, P280,
CAS: 75-56-9 Muta. 1B, Acute Tox. 4, Skin GHS: Skin Irrit. 2, Eye Irrit. 2, P305+P351+P338
MW: 58.08 Irrit. 2, Eye Irrit. 2, STOT SE 3 STOT SE 3
Density at 20°C: 0.830 H224, H302, H319, H312,
Boiling point: 34 °C H332, H340, H350, H315, H335 Guaranteed analysis
Melting point: -112 °C P280, P201, P308+P313,
Flash point: -37 °C P302+P352, P261, Complies with standard IR spectrum: Pass
ADR/RID: 3, I P301+P312, P304+P340,
EINECS: 200-879-2 P305+P351+P338, P210,
UN: 1280 P240, P243, P403+P235
Assay (CG): >99% Eriochrome cyanine R C.I. 43820
pure, Metal indicator
Erbium standard metal solution 1000 ppm packaging Cat. No
25 g Glass jar 1075-4561
for ICP solution in HNO3 2%, NIST certified C23H15Na3O9S
CAS: 3564-18-9
packaging Cat. No Mfr. No MW: 536.39
100 mÒ Plastic bottle EINECS: 222-641-7
500 mÒ Plastic bottle 1197-9512 SPPLER22Y
1196-9512 SPPLER22X Guaranteed analysis
H315, H319 Complies with standard IR spectrum: Pass
Manufactured to a tolerance of ± 0.5%. Eschka’s mixture Cat. No
All standards are manufactured from acids, metals & metal salts and contain less 1000-0150
than <10 ppm total metal impurites. for analysis
See also the full range in the Standard Elemental solution for Trace metal analysis : <0.005% Potassium (K)
section see page 314. packaging <500 ppm Total phosphorus (P)
Check with your local distributor for availability of Spex product 500 g Plastic jar Total silicon (Si)
Guaranteed analysis <10 ppm Total sulphur (S)
Read more on page 234 Insoluble in HCl <100 ppm Zinc (Zn)
Calcium (Ca)
Copper (Cu) <10 ppm
Iron (Fe)
Lead (Pb) 65-67% Sodium carbonate
Typical analysis
Magnesium oxide
Ethanal See Acetaldehyde, page 13
119
E | Ethanediol
Ethanediol Certified AR Ethanol absolute Primar
for analysis Trace metal analysis
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
E/0352/08 E/0655DF/17
500 mÒ Glass bottle 1033-5800 E/0352/17 2.5 Ò Glass bottle 1247-8750
2.5 Ò Glass bottle 1004-0160 E/0352/PB17
2.5 Ò Coated Glass bottle 1028-4430 E/0352/25 C2H5OH ADR/RID: 3, II
25 Ò HDPE Plastic container 1075-4371 E/0352/27 CAS: 64-17-5 EINECS: 200-578-6
200 Ò Metal drum 1197-7653 MW: 46.06 UN: 1170
<1 ppm Density at 20°C: 0.790 GHS: Flam. Liq. 2
C2H6O2 Flash point: 116 °C <0.5 ppm Boiling point: 78 °C H225
CAS: 107-21-1 EINECS: 203-473-3 <0.5 ppm Melting point: -114 °C P210, P240
MW: 62.07 GHS: Acute Tox. 4 Flash point: 13 to 17 °C
Density at 20°C: 1.113 H302 <2 ppm
Boiling point: 196 to 198 °C P280, P301+P310 <1 ppm Assay (CG): >99.8%
Melting point: -13 °C <0.2 ppm
<10 ppm Guaranteed analysis
<0.5 ppm
Acidity / Alkalinity <0.0001 meq/g Molybdenum (Mo) <0.01 ppm
<0.05 ppm Nickel (Ni) <0.01 ppm
Assay (CG): >99.5% <0.05 ppm Color <10 APHA Potassium (K)
<0.05 ppm Sodium (Na) <0.5 ppm
Guaranteed analysis <0.05 ppm Residue after evaporation <10 ppm Strontium (Sr) <2 ppm
<0.05 ppm Titanium (Ti)
Acidity / Alkalinity <0.0002 meq/g Lead (Pb) <0.05 ppm Other organics : <0.02% Total phosphorus (P) <0.01 ppm
Color <10 APHA Magnesium (Mg) Total silicon (Si) <0.01 ppm
Water <0.1% Potassium (K) Substances Total sulphur (S)
Residue after ignition <0.003% Sodium (Na) Vanadium (V) <0.5 ppm
Calcium (Ca) <1 ppm Total phosphorus (P) reducing KMnO4 <0.0005% Zinc (Zn) <0.05 ppm
Free Chlorine (Cl2) <0.2 ppm Total silicon (Si) Aluminium (Al) <0.1 ppm Acetone
Copper (Cu) <1 ppm Total sulphur (S) Furfuraldehyde <1 ppm
Iron (Fe) <2 ppm Zinc (Zn) Barium (Ba) <0.01 ppm Substances darkened <0.01 ppm
by H2SO4
Cadmium (Cd) <0.01 ppm Propan--2-ol <0.2 ppm
Methanol <0.001%
Calcium (Ca) <0.5 ppm <0.001%
Chromium (Cr) <0.01 ppm <10 APHA
<0.003%
Typical analysis Cobalt (Co) <0.01 ppm <0.002%
Aluminium (Al) Copper (Cu) <0.05 ppm
Barium (Ba)
Cadmium (Cd) <0.2 ppm Manganese (Mn) Iron (Fe) <0.2 ppm
Chromium (Cr) <0.1 ppm Molybdenum (Mo)
Cobalt (Co) <0.05 ppm Nickel (Ni) Lead (Pb) <0.05 ppm
Lithium (Li) <0.05 ppm Strontium (Sr)
<0.05 ppm Titanium (Ti) Lithium (Li) <0.01 ppm
<0.02 ppm Vanadium (V)
Magnesium (Mg) <0.05 ppm
Manganese (Mn) <0.01 ppm
For the glycerol determination. The trade of absolute ethanol is subject to European excise legislation and the distri-
Lot analysis on the label. butor will need a European registered excise authorisation number to purchase the
following codes: E/0655DF/17.
The following codes are duty-paid items that are available in the UK market only:
E/0655/17.
Lot analysis on the label.
Ethanedionic acid See Oxalic acid dihydrated, page 222
Ethanol absolute
for the determination of 17-ketosteroids
packaging Cat. No Mfr. No
E/0660/08
500 mÒ Glass bottle 1248-8750
Ethanol absolute Certified C2H5OH ADR/RID: 3, II
CAS: 64-17-5 EINECS: 200-578-6
for HPLC MW: 46.06 UN: 1170
Density at 20°C: 0.790 GHS: Flam. Liq. 2
packaging Cat. No Mfr. No Boiling point: 78 °C H225
Melting point: -114 °C P210, P240
1 Ò Glass bottle 1054-2382 E/0665DF/15 Flash point: 13 to 17 °C
2.5 Ò Glass bottle 1042-8671 E/0665DF/17
10 Ò Returnable Drum 1267-6697 E/0665DF/10RS This is a duty-paid item that is available in the UK market only
25 Ò Returnable Drum 1268-6697 E/0665DF/25RS
30 Ò Returnable Drum 1269-6697 E/0665DF/30RS
C2H5OH ADR/RID: 3, II Ethanol absolute Certified AR, Eur.Ph., BP, USP
CAS: 64-17-5 EINECS: 200-578-6
MW: 46.06 UN: 1170 for analysis
Density at 20°C: 0.790 GHS: Flam. Liq. 2
Boiling point: 78 °C H225 packaging Cat. No Mfr. No
Melting point: -114 °C P210, P240
Flash point: 13 to 17 °C E/0650DF/08
500 mÒ Glass bottle 1249-8740 E/0650DF/15
Guaranteed analysis : >99.8% Water <0.3% 1Ò Glass bottle 1034-2652 E/0650DF/17
<0.0002 meq/g Residue after evaporation <10 ppm 2.5 Ò Glass bottle 1043-7341 E/0650DF/C17
Assay (GC) 2.5 Ò HDPE Plastic bottle 1000-0652 E/0650DF/P17
Acidity / Alkalinity E/0650DF/21
E/0650DF/24
Absorbance specification 2.5 Ò Coated Glass bottle 1246-8750 E/0650DF/25
Max. Absorbance (1cm cell v HPLC water)
5 Ò Fluorinated HDPE Plastic bottle 1000-7731
210 nm <0.6 A.U. 250 nm <0.05 A.U. 10 Ò HDPE Plastic container 1062-2133
220 nm <0.3 A.U. 270 nm <0.025 A.U. 25 Ò Metal drum 1010-0332
230 nm <0.125 A.U. 290 nm <0.015 A.U.
C2H5OH ADR/RID: 3, II
The trade of absolute ethanol is subject to local regulation and additional excise du- CAS: 64-17-5 EINECS: 200-578-6
ties apply (only applicable in the UK market) to the following code: E/0665/15, MW: 46.06 UN: 1170
E/0665/17. Density at 20°C: 0.790 GHS: Flam. Liq. 2
Lot analysis on the label. Boiling point: 78 °C H225
Filtered to 0.2µm. Melting point: -114 °C P210, P240
Trade in alcohol is regulated, for more information see Sales conditions page. Flash point: 13 to 17 °C
120
Ethanol 95% | E
Guaranteed analysis Ethanol 95% v/v Certified AR, USP
Assay (GC) : >99.8% Iron (Fe) <0.2 ppm for analysis
Lead (Pb) <0.05 ppm
Acidity (acetic acid) <0.002% Magnesium (Mg) <0.05 ppm
Potassium (K)
Acidity / Alkalinity <0.0001 meq/g Sodium (Na) <0.5 ppm packaging Cat. No Mfr. No
Total phosphorus (P) <2 ppm
Color <10 APHA Total silicon (Si) 500 mÒ Glass bottle 1240-8720 E/0550/08
Total sulphur (S) <0.5 ppm 1 Ò Glass bottle 1009-0100 E/0550DF/15
Water <0.2% Zinc (Zn) <0.05 ppm 2.5 Ò Glass bottle 1241-8720
Aldehydes 2.5 Ò Glass bottle 1031-5752 E/0550/17
Residue after evaporation <10 ppm Furfuraldehyde <1 ppm 5 Ò Fluorinated HDPE Plastic bottle 1041-7322 E/0550DF/17
Methanol <0.2 ppm 25 Ò Metal drum 1027-3862 E/0550DF/21
Substances darkened Propan--2-ol <0.002% E/0550DF/25
<0.001%
by (H2SO4) <10 APHA <0.002%
Substances <0.003%
reducing KMnO4 <0.0005% C2H5OH ADR/RID: 3, II
Acetone <0.001% CAS: 64-17-5 EINECS: 200-578-6
MW: 46.06 UN: 1170
Other organics : <0.02% Density at 20°C: 0.790 GHS: Flam. Liq. 2
Boiling point: 78 °C H225
Calcium (Ca) <0.5 ppm Melting point: -114 °C P210, P240
Flash point: 13 to 17 °C
Copper (Cu) <0.05 ppm
Typical analysis <0.1 ppm Manganese (Mn) <0.01 ppm Guaranteed analysis
<0.01 ppm Molybdenum (Mo) <0.01 ppm
Aluminium (Al) <0.01 ppm Nickel (Ni) <0.01 ppm Acidity / Alkalinity <0.0005 meq/g Sodium (Na) <2 ppm
Barium (Ba) <0.01 ppm Strontium (Sr) <0.01 ppm Substances
Cadmium (Cd) <0.01 ppm Titanium (Ti) <0.01 ppm Color <10 APHA reducing KMnO4 <0.0005%
Chromium (Cr) <0.01 ppm Vanadium (V) <0.01 ppm Total phosphorus (P) <0.2 ppm
Cobalt (Co) Density at 15.5°C : 0.812 to 0.816 Total silicon (Si) <0.5 ppm
Lithium (Li) Total sulphur (S)
Zinc (Zn) <2 ppm
Trade in alcohol is regulated, for more information see Sales conditions page. Water insoluble substances test : Pass Furfuraldehyde <0.2 ppm
The trade of absolute ethanol is subjected to the European excise legislation and the Methanol <0.001%
distributor will need an European registered excise authorisation number to the follo- Residue after evaporation <10 ppm Others impurities
wing codes: E/0650DF/08, E/0650DF/15, E/0650DF/17, E/0650DF/C17, Propan--2-ol <0.02%
E/0650DF/P17, E/0650DF/21, E/0650DF/24, E/0650DF/25. Acetone <0.002% Substances darkened <0.2%
by H2SO4
Amyl alcohol and non volatile carbonisa- <0.02%
ble substances test : Pass <10 APHA
The trade of absolute ethanol is subject to local regulation and additional excise du- Calcium (Ca) <1 ppm
ties apply (only applicable in the UK market) to the following codes: E/0650/05,
E/0650/08, E/0650/15, E/0650/17, E/0650/PC17, E/0650/25. Copper (Cu) <0.05 ppm
Iron (Fe) <0.2 ppm
Lead (Pb) <0.05 ppm
Lot analysis on the label. Magnesium (Mg) <0.2 ppm
Potassium (K) <0.1 ppm
Typical analysis
Aluminium (Al) <0.1 ppm Manganese (Mn) <0.02 ppm
Barium (Ba) <0.02 ppm Molybdenum (Mo) <0.02 ppm
Cadmium (Cd) <0.05 ppm Nickel (Ni) <0.02 ppm
Chromium (Cr) <0.02 ppm Strontium (Sr) <0.02 ppm
Cobalt (Co) <0.02 ppm Titanium (Ti) <0.02 ppm
Lithium (Li) <0.02 ppm Vanadium (V) <0.02 ppm
Ethanol absolute SLR The trade of absolute ethanol is subjected to the European excise legislation and the
distributor will need an European registered excise authorisation number to the follo-
specified reagents for general laboratory work- extra pure wing codes: E/0550DF/15, E/0550DF/17, E/0550DF/21, E/0550DF/25 .
The trade of absolute ethanol is subject to local regulation and additional excise du-
ties apply (only applicable in the UK market) to the following codes: E/0550/08,
E/0550/17, E/0550/PC17 .
Lot analysis on the label
packaging Cat. No Mfr. No
1 Ò Glass bottle 1068-0993 E/0600DF/15
2.5 Ò Glass bottle 1004-8291 E/0600DF/17
2.5 Ò HDPE Plastic bottle 1061-0813 E/0600DF/C17
5 Ò Fluorinated HDPE Plastic bottle 1037-5842 E/0600DF/21
5 Ò Fluorinated HDPE square Drum 1080-7140 E/0600DF/F21
25 Ò Metal drum 1023-3962 E/0600DF/25
25 Ò HDPE Plastic container 1038-5842 E/0600DF/P25
C2H5OH ADR/RID: 3, II
CAS: 64-17-5 EINECS: 200-578-6
MW: 46.06 UN: 1170
Density at 20°C: 0.790 GHS: Flam. Liq. 2
Boiling point: 78 °C H225
Melting point: -114 °C P210, P240
Flash point: 13 to 17 °C
Guaranteed analysis
Assay (GC) : >99% reducing KMnO4 <0.001%
Acidity / Alkalinity <0.005 meq/g Zinc (Zn) <2 ppm
Color <20 APHA Copper (Cu) <1 ppm
Water <0.5% Iron (Fe) <2 ppm
Residue after evaporation <50 ppm Lead (Pb) <1 ppm
Substances Magnesium (Mg) <2 ppm
reducing KMnO4 <0.001% Total phosphorus (P) <2 ppm
Calcium (Ca) <5 ppm Total silicon (Si) <1 ppm
Potassium (K) <2 ppm Total sulphur (S) <5 ppm
Sodium (Na) <10 ppm Substances darkened
Substances by H2SO4 <20 APHA
The trade of absolute ethanol is subjected to the European excise legislation and the
distributor will need an European registered excise authorisation number to the follo-
wing codes: E/0600DF/15, E/0600DF/17, E/0600DF/C17, E/0600DF/21,
E/0600DF/F21, E/0600DF/P25.
The trade of absolute ethanol is subject to local regulation and additional excise du-
ties apply (only applicable in the UK market) to the following codes: E/0600/05,
E/0600/08, E/0600/17, E/0600/PC17.
121
E | Ethanol 96% v/v
Ethanol 96% v/v Certified AR, Eur.Ph., BP, USP Ethanol 95% v/v SLR
for analysis specified reagents for general laboratory work- extra pure
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
2.5 Ò Glass bottle 1241-8730 E/0555/17 500 mÒ Glass bottle 1289-7172 E/0500/08
2.5 Ò HDPE Plastic bottle 1243-8730 E/0555/PC17 500 mÒ Glass bottle 1051-0153 E/0500DF/08
2.5 Ò Glass bottle 1033-2562 E/0555DF/17 1 Ò Glass bottle 1068-1533 E/0500DF/15
5 Ò Fluorinated HDPE Plastic bottle 1070-3753 E/0555DF/21 2.5 Ò Glass bottle 1280-7182
25 Ò Metal drum 1060-8932 E/0555DF/25 2.5 Ò HDPE Plastic bottle 1281-7182 E/0500/17
2.5 Ò Glass bottle 1004-0602 E/0500/PC17
C2H5OH ADR/RID: 3, II 2.5 Ò HDPE Plastic bottle 1057-2143 E/0500DF/17
CAS: 64-17-5 EINECS: 200-578-6 2.5 Ò Coated Glass bottle 1266-6697 E/0500DF/C17
MW: 46.06 UN: 1170 5 Ò HDPE Plastic bottle 1030-5752 E/0500DF/P17
Density at 20°C: 0.790 GHS: Flam. Liq. 2 10 Ò HDPE Plastic container 1044-7492 E/0500DF/P21
Boiling point: 78 °C H225 25 Ò Plastic container 1282-7182 E/0500DF/P24
Melting point: -114 °C P210, P240 E/0500DF/P25
Flash point: 13 to 17 °C
C2H5OH ADR/RID: 3, II
Guaranteed analysis CAS: 64-17-5 EINECS: 200-578-6
MW: 46.06 UN: 1170
Acidity / Alkalinity <0.0005 meq/g Potassium (K) <0.1 ppm Density at 20°C: 0.790 GHS: Flam. Liq. 2
Sodium (Na) <2 ppm Boiling point: 78 °C H225
Color <10 APHA Substances Melting point: -114 °C P210, P240
reducing KMnO4 <0.0005% Flash point: 13 to 17 °C
Water insoluble substances test : Pass Total phosphorus (P) <0.2 ppm
Total silicon (Si) <0.05 ppm
Residue after evaporation <10 ppm Zinc (Zn) <0.2 ppm
Furfuraldehyde <0.001%
Substances darkened Methanol
Others impurities <0.02%
by (H2SO4) <10 APHA Propan--2-ol <0.02% Guaranteed analysis
Acetone <0.002% Substances darkened <0.02%
by H2SO4 Acidity / Alkalinity <0.005 meq/g Zinc (Zn) <2 ppm
Amyl alcohol and non volatile carbonisa- Total sulphur (S) <10 APHA Copper (Cu) <1 ppm
<2 ppm Color <20 APHA Iron (Fe) <2 ppm
ble substances test : Pass Lead (Pb) <1 ppm
Residue after evaporation <100 ppm Magnesium (Mg) <2 ppm
Calcium (Ca) <1 ppm Total phosphorus (P) <2 ppm
Substances Total silicon (Si) <1 ppm
Copper (Cu) <0.05 ppm Total sulphur (S) <5 ppm
reducing KMnO4 <0.001%
Iron (Fe) <0.2 ppm Calcium (Ca) <5 ppm
Lead (Pb) <0.05 ppm Potassium (K) <2 ppm
Magnesium (Mg) <0.2 ppm Sodium (Na) <10 ppm
Typical analysis <0.1 ppm Manganese (Mn) <0.02 ppm The trade of absolute ethanol is subjected to the European excise legislation and the
<0.02 ppm Molybdenum (Mo) <0.02 ppm distributor will need an European registered excise authorisation number to the follo-
Aluminium (Al) <0.05 ppm Nickel (Ni) <0.02 ppm wing codes:E/0500DF/08, E/0500DF/15, E/0500DF/C17, E/0500DF/P17,
Barium (Ba) <0.02 ppm Strontium (Sr) <0.02 ppm E/0500DF/P21, E/0500DF/P24, E/0500DF/P25 .
Cadmium (Cd) <0.02 ppm Titanium (Ti) <0.02 ppm The trade of absolute ethanol is subject to local regulation and additional excise du-
Chromium (Cr) <0.02 ppm Vanadium (V) <0.02 ppm ties apply (only applicable in the UK market) to the following codes:
Cobalt (Co) E/0500/08,E/0500/17, E/0500/PC17 .
Lithium (Li)
The trade of absolute ethanol is subject to local regulation and additional excise du- Ethanol 90 % v/v SLR
ties apply (only applicable in the UK market) to the following codes: E/0555/17,
E/0555/PC17, E/0555/25. specified reagents for general laboratory work- extra pure
Trade in alcohol is regulated, for more information see Sales conditions page. The
trade of absolute ethanol is subjected to the European excise legislation and the dis-
tributor will need an European registered excise authorisation number to the follo-
wing codes: E/0555DF/17, E/0555DF/21, E/0555DF/25.
Lot analysis on the label
packaging Cat. No Mfr. No
E/0400/08
500 mÒ Glass bottle 1245-8710 E/0400/17
2.5 Ò Glass bottle 1246-8710
<0.1%
Ethanol 96 % v/v SLR C2H5OH ADR/RID: 3, II
CAS: 64-17-5 EINECS: 200-578-6
specified reagents for general laboratory work- extra pure MW: 46.06 UN: 1170
Density at 20°C: 0.790 GHS: Flam. Liq. 2
Boiling point: 78 °C H225
Melting point: -114.1 °C P210, P240
Flash point: 16.66 °C
Guaranteed analysis
packaging Cat. No Mfr. No Residue after evaporation <100 ppm Methanol
2.5 Ò Glass bottle 1016-2252 E/0551DF/17 These are duty-paid items that are available in the UK market only
2.5 Ò HDPE Plastic bottle 1025-3912 E/0551DF/C17
C2H5OH ADR/RID: 3, II Ethanol, denatured with 2% MEK SLR
CAS: 64-17-5 EINECS: 200-578-6
MW: 46.06 UN: 1170 specified reagents for general laboratory work- extra pure
Density at 20°C: 0.790 GHS: Flam. Liq. 2
Boiling point: 78 °C H225
Melting point: -114 °C P210, P240
Flash point: 13 to 17 °C
Guaranteed analysis packaging Cat. No Mfr. No
E/0580/FP21
Acidity / Alkalinity <0.005 meq/g Lead (Pb) <1 ppm 5 Ò Fluorinated HDPE square Drum 1042-9949
Magnesium (Mg) <2 ppm
Color <20 APHA Potassium (K) <2 ppm C2H5OH ADR/RID: 3, II
Sodium (Na) <10 ppm CAS: 64-17-5 EINECS: 200-578-6
Residue after evaporation <100 ppm Total phosphorus (P) <2 ppm MW: 46.06 UN: 1170
Total silicon (Si) <1 ppm Density at 20°C: 0.790 GHS: Flam. Liq. 2
Substances Total sulphur (S) <5 ppm Boiling point: 78 °C H225
Zinc (Zn) <2 ppm Melting point: -114 °C P210, P240
reducing KMnO4 <0.001% Flash point: 13 to 17 °C
Calcium (Ca) <5 ppm
Copper (Cu) <1 ppm
Iron (Fe) <2 ppm
The trade of absolute ethanol is subject to European excise legislation and the distri- Assay (CG): >95%
butor will need a European registered excise authorisation number to purchase the
following codes: E/0551DF/17, E/0551DF/C17 . Guaranteed analysis : 0.788 to 0.791 Refractive index at 20°C : 1.360 to 1.363
The following codes are duty-paid items that are available in the UK market only: <0.3%
E/0551/17, E/0551/PC17 . Density at 20°C
Water
122
2-Ethoxyethanol | E
Ethanolamine Certified AR Ethidium® bromide solution
for analysis for electrophoresis
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
E/0701/08
500 mÒ Glass bottle 1073-6481 E/0701/17 10 mÒ Glass bottle 1071-4181 E/P800/03
2.5 Ò Glass bottle 1026-4190 50 mÒ Glass bottle 1037-5700 E/P800/10
<0.5 ppm
C2H7NO EINECS: 205-483-3 <5 ppm C21H20BrN3 UN: 2810
CAS: 141-43-5 UN: 2491 CAS: 1239-45-8 GHS: Muta. 2, Acute Tox. 3
MW: 61.08 GHS: Acute Tox. 4, Skin <0.5 ppm MW: 394.30 H331, H341
Density at 20°C: 1.012 Corr. 1B, STOT SE 3 <0.2 ppm ADR/RID: 6.1, III P310, P281, P304+P340
Boiling point: 170 °C H335, H314, H302, H332, H312 EINECS: 214-984-6
Melting point: 10.3 °C P280, P305+P351+P338, <1 ppm
Flash point: 85 °C P261, P308+P313 <1 ppm
ADR/RID: 8, III
<10 APHA Potassium (K) SLR 2-Ethoxyethanol Certified AR
Assay (CG): >99.5% <0.005% Sodium (Na)
Total phosphorus (P) Mfr. No for analysis Cat. No Mfr. No
Guaranteed analysis <2 ppm Total silicon (Si) E/0700/08 E/0751/08
<1 ppm Total sulphur (S) E/0700/17 packaging 1149-8233
Color <2 ppm Zinc (Zn) E/0700/PB17 500 mÒ Glass bottle
Residue after ignition <1 ppm E/0700/25 EINECS: 203-804-1
Calcium (Ca) <0.5 ppm C4H10O3 UN: 1171
Copper (Cu) <20 ppm CAS: 110-80-5 GHS: Flam. Liq. 3, Repr. 1B,
Iron (Fe) <2 ppm MW: 90.12 Acute Tox. 4
Lead (Pb) <1 ppm Density at 20°C: 0.930 H226, H360FD, H332,
Magnesium (Mg) <5 ppm Boiling point: 135 °C H312, H302
<2 ppm Melting point: -100 °C P280, P201, P308+P313,
Lot analysis on the label. <0.02% Flash point: 44 °C P302+P352, P304+P340, P210
ADR/RID: 3, III
Ethanolamine
Assay (CG): >99.5%
specified reagents for general laboratory work- extra pure
packaging Cat. No Guaranteed analysis
500 mÒ Glass bottle 1050-8040 Acidity / Alkalinity <0.001 meq/g Magnesium (Mg) <0.2 ppm
2.5 Ò Glass bottle 1034-6230 Potassium (K) <0.5 ppm
2.5 Ò Coated Glass bottle 1028-7233 Color <10 APHA Sodium (Na)
25 Ò Metal drum 1261-8635 Total phosphorus (P) <2 ppm
Water <0.1% Total silicon (Si) <0.5 ppm
C2H7NO EINECS: 205-483-3 Total sulphur (S) <0.05 ppm
CAS: 141-43-5 UN: 2491 Residue after evaporation <50 ppm Zinc (Zn)
MW: 61.08 GHS: Acute Tox. 4, Skin <2 ppm
Density at 20°C: 1.012 Corr. 1B, STOT SE 3 Calcium (Ca) <1 ppm Manganese (Mn) <1 ppm
Boiling point: 170 °C H335, H314, H302, H332, H312 Molybdenum (Mo)
Melting point: 10.3 °C P280, P305+P351+P338, Copper (Cu) <0.05 ppm Nickel (Ni) <0.02 ppm
Flash point: 85 °C P261, P308+P313 Strontium (Sr) <0.02 ppm
ADR/RID: 8, III Iron (Fe) <0.5 ppm Titanium (Ti) <0.05 ppm
Vanadium (V) <0.02 ppm
Assay (CG): >99% Lead (Pb) <0.05 ppm <0.02 ppm
<0.02 ppm
Guaranteed analysis <20 APHA Sodium (Na) Typical analysis <0.1 ppm
<10 ppm Total phosphorus (P) <0.02 ppm
Color Total silicon (Si) Aluminium (Al) <0.05 ppm
Calcium (Ca) <5 ppm Total sulphur (S) Barium (Ba) <0.02 ppm
Copper (Cu) <10 ppm Zinc (Zn) Cadmium (Cd) <0.02 ppm
Iron (Fe) Residue after ignition Chromium (Cr) <0.02 ppm
Lead (Pb) <5 ppm Cobalt (Co)
Magnesium (Mg) <2 ppm Lithium (Li)
Potassium (K) <2 ppm
Lot analysis on the label
2-Ethoxyethanol SLR
specified reagents for general laboratory work- extra pure
Ethenylbenzene See Styrene, page 333 packaging Cat. No Mfr. No
Ethidium® bromide 1 Ò Glass bottle 1019-1800 E/0750/15
2.5 Ò Glass bottle 1051-8040 E/0750/17
for electrophoresis 25 Ò Metal drum 1011-1760 E/0750/25
C4H10O2 EINECS: 203-804-1
CAS: 110-80-5 UN: 1171
MW: 90.12 GHS: Flam. Liq. 3, Repr. 1B,
Density at 20°C: 0.930 Acute Tox. 4
Boiling point: 135 °C H226, H360FD, H332,
Melting point: -100 °C H312, H302
Flash point: 44 °C P280, P201, P308+P313,
ADR/RID: 3, III P302+P352, P304+P340, P210
packaging Cat. No Mfr. No Assay (CG): >99%
E/P700/44
5 g Glass jar 1077-3601
Guaranteed analysis
C21H20BrN3 EINECS: 214-984-6
CAS: 1239-45-8 UN: 2811 Acidity / Alkalinity <0.005 meq/g Magnesium (Mg) <2 ppm
MW: 394.30 GHS: Muta. 2, Acute Tox. 2 Potassium (K) <2 ppm
Melting point: 260 to 262 °C H341, H330, H302 Color <20 APHA Sodium (Na) <10 ppm
Flash point: >100 °C P310, P281, P304+P340 Total phosphorus (P) <1 ppm
ADR/RID: 6.1, I Water <0.2% Total silicon (Si) <1 ppm
Total sulphur (S) <5 ppm
Residue after evaporation <100 ppm Zinc (Zn) <2 ppm
Calcium (Ca) <5 ppm
Assay: > 95% Copper (Cu) <2 ppm
Fluorescent dye for DNA/RNA in density gradients and electrophoresis gels.
Iron (Fe) <5 ppm
Lead (Pb) <2 ppm
123
E | 2-Ethoxyethyl acetate
2-Ethoxyethyl acetate Ethyl acetate Distol
pure for residue and pesticide analysis
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
2.5 Ò Coated Glass bottle E/0800/PB17
1011-1810 1 Ò Glass bottle 1078-3791 E/0903/15
C6H12O3 Certified 2.5 Ò Glass bottle 1079-3791 E/0903/17
CAS: 111-15-9 UN: 1172 Mfr. No
MW: 132.16 GHS: Flam. Liq. 3, Repr. 1B, C4H8O2 EINECS: 205-500-4
Density at 20°C: 0.970 Acute Tox. 4 E/0906/15 CAS: 141-78-6 UN: 1173
Boiling point: 156 °C H226, H312, H360FD, E/0906/17 MW: 88.11 GHS: Flam. Liq. 2, Eye Irrit.
Melting point: -61 °C H302, H332 E/0906/PB17 Density at 20°C: 0.902 2, STOT SE 3
Flash point: 51 °C P280, P308+P313, E/0906/10RSS Boiling point: 75 to 78 °C H225, H319, H336, EUH066
ADR/RID: 3, III P304+P340, P302+P352, E/0906/25RSS Melting point: -83.5 °C P261, P280,
EINECS: 203-839-2 P301+P312, P210 E/0906/30RSS Flash point: -4 °C P305+P351+P338, P210, P240
ADR/RID: 3, II
Assay (CG): >98% <2 ppm
<0.025 A.U. Guaranteed analysis <0.05% GC (FID) Analysis Pass
<0.005 A.U. <2 ppm GC (NPD) analysis Pass
Water
Residue after evaporation Pass
GC (ECD) Analysis
Ethyl acetate GC Analysis
for HPLC Analysis of pesticides: from the retention time of Lindane, after concentration of
2500 times, no impurity peak higher than that obtained with 10 pg / mÒ héptachlo-
packaging Cat. No réoxide (ECD) and 5 pg / mÒ Parathion (NPD).
1 Ò Glass bottle 1072-4181 Analysis of hydrocarbons: no impurity chain longer than the dodecane is present at
2.5 Ò Glass bottle 1045-6870
2.5 Ò Coated Glass bottle 1004-0140 a concentration greater than 0.01 ppm (FID).
10 Ò Returnable Drum 1261-6707
25 Ò Returnable Drum 1262-6707 Conditions :
30 Ò Returnable Drum 1263-6707
Column: J&W DB 5: 30m x 0.32mm x 0.1µm df.
C4H8O2 EINECS: 205-500-4
CAS: 141-78-6 UN: 1173 Temperature profile: (1) 50°C, 2 min
MW: 88.11 GHS: Flam. Liq. 2, Eye Irrit.
Density at 20°C: 0.902 2, STOT SE 3 (2) 40°C / min until 320°C
Boiling point: 75 to 78 °C H225, H319, H336, EUH066
Melting point: -83.5 °C P261, P280, (3) 320°C for 30 min
Flash point: -4 °C P305+P351+P338, P210, P240 Injection: 5µÒ cold on the column.
ADR/RID: 3, II
Ethyl acetate
for peptide sequencing
Assay (CG): >99.5% packaging Cat. No Mfr. No
E/0908/17
Guaranteed analysis <0.0015 meq/g Residue after evaporation 2.5 Ò Glass bottle 1022-4290
<0.03% <0.0015 meq/g
Acidity / Alkalinity C4H8O2 EINECS: 205-500-4 : <0.005 A.U.
Water CAS: 141-78-6 UN: 1173
MW: 88.11 GHS: Flam. Liq. 2, Eye Irrit.
Absorbance specification Density at 20°C: 0.902 2, STOT SE 3
Max. Absorbance (1cm cell v HPLC water) Boiling point: 75 to 78 °C H225, H319, H336, EUH066
Melting point: -83.5 °C P261, P280,
Flash point: -4 °C P305+P351+P338, P210, P240
ADR/RID: 3, II
255 nm : <1 A.U. 270 nm Assay (CG): >99.5%
260 nm <0.12 A.U. 280 nm
Guaranteed analysis
Lot analysis on the label. <0.03% Acidity
Filtered to 0.2 µm. Water <2 ppm
Residue after evaporation
Absorbance specification
Max. Absorbance (1cm cell v HPLC water)
256 nm : <1 A.U. 325 nm
275 nm : <0.025 A.U.
Ethyl acetate Certified
for HPLC, dried with water content <100pm Ethyl acetate
packaging Cat. No Mfr. No for analysis Certified AR
E/0907/17
2.5 Ò Glass bottle 1147-8273 packaging Cat. No Mfr. No
<2 ppm E/0900/15
C4H8O2 EINECS: 205-500-4 <0.025 A.U. 1Ò Glass bottle 1069-7212 E/0900/17
CAS: 141-78-6 UN: 1173 <0.005 A.U. 2.5 Ò Glass bottle 1038-6320 E/0900/PB17
MW: 88.11 GHS: Flam. Liq. 2, Eye Irrit. 2.5 Ò Coated Glass bottle 1042-9750 E/0900/PC17
Density at 20°C: 0.902 2, STOT SE 3 2.5 Ò HDPE Plastic bottle 1038-8003 E/0900/21
Boiling point: 75 to 78 °C H225, H319, H336, EUH066 5Ò Fluorinated HDPE Plastic bottle 1018-2392 E/0900/FP21
Melting point: -83.5 °C P261, P280, 5Ò Fluorinated HDPE square Drum 1205-8598 E/0900/25
Flash point: -4 °C P305+P351+P338, P210, P240 25 Ò Metal drum 1039-6320 E/0900/27
ADR/RID: 3, II 200 Ò Metal drum 1023-8583
Assay (CG): >99.5%
Guaranteed analysis <0.0015 meq/g Residue after evaporation C4H8O2 EINECS: 205-500-4
<0.01% CAS: 141-78-6 UN: 1173
Acidity / Alkalinity MW: 88.11 GHS: Flam. Liq. 2, Eye Irrit.
Water Density at 20°C: 0.902 2, STOT SE 3
Boiling point: 75 to 78 °C H225, H319, H336, EUH066
Absorbance specification Melting point: -83.5 °C P261, P280,
Max. Absorbance (1cm cell v HPLC water) Flash point: -4 °C P305+P351+P338, P210, P240
ADR/RID: 3, II
255 nm : <1 A.U. 270 nm
260 nm <0.12 A.U. 280 nm
Lot analysis on the label. Assay (CG): >99.8%
Filtered to 0.2µm.
124
Ethylenecarboxamide | E
Guaranteed analysis Ethylamine
Acidity / Alkalinity <0.0005 meq/g Substances pure, solution 70% w/w in water
reducing KMnO4
Color <5 APHA Total phosphorus (P) <0.0005%
Total silicon (Si) <0.1 ppm
Water <0.03% Total sulphur (S) <0.05 ppm packaging Cat. No Mfr. No
Zinc (Zn) <0.2 ppm E/1000/08
Residue after evaporation <10 ppm Ethanol 90 % v/v <0.1 ppm 500 mÒ Glass bottle 1063-7602
Ethyl propanoate SLR
iso-Propyl acetate : <0.05% Methanol <0.1% C2H7N GHS: Flam. Liq. 2, Acute Mfr. No
Methyl acetate <0.1% CAS: 75-04-7 Tox. 3, Skin Corr. 1A, Eye E/1100/08
n-Propyle acetate : <0.05% Substances darkened <0.02% MW: 45.90 Dam. 1, STOT SE 3
by H2SO4 <0.02% Density at 20°C: 0.800 H225, H314, H332, H335, Mfr. No
Copper (Cu) <0.02 ppm Boiling point: 39 °C H302, H311 E/1250/04
Manganese (Mn) <10 APHA Melting point: -81.1 °C P301+P330+P331, P280,
Iron (Fe) <0.1 ppm Molybdenum (Mo) Flash point: -17 °C P305+P351+P338, P310,
Nickel (Ni) <0.01 ppm ADR/RID: 3, 8, II P261, P301+P312,
Lead (Pb) <0.02 ppm Strontium (Sr) <0.01 ppm EINECS: 200-834-7 P304+P340, P210, P240
Titanium (Ti) <0.01 ppm UN: 2270
Magnesium (Mg) <0.05 ppm Vanadium (V) <0.01 ppm
<0.01 ppm
Potassium (K) <0.5 ppm <0.01 ppm
Sodium (Na) <0.5 ppm
Typical analysis
Aluminium (Al) <0.1 ppm Ethyl benzoate
Barium (Ba) <0.01 ppm
Cadmium (Cd) <0.01 ppm specified reagents for general laboratory work- extra pure
Calcium (Ca) <0.01 ppm
Chromium (Cr) <0.01 ppm
Cobalt (Co) <0.01 ppm
Lithium (Li) <0.01 ppm
Lot analysis on the label.
Ethyl acetate SLR packaging Cat. No
500 mÒ Glass bottle
specified reagents for general laboratory work- extra pure 1008-0140
C9H10O2
CAS: 93-89-0 Flash point: 84 °C
MW: 150.18 EINECS: 202-284-3
Density at 20°C: 1.045 GHS: Skin Irrit. 2, Eye Irrit. 2
Boiling point: 212 °C H315, H319
Melting point: -34 °C P302+P352, P280,
P305+P351+P338
Assay (CG): >99%
packaging Cat. No Mfr. No
E/0850/08
500 mÒ Glass bottle 1141-8243 E/0850/15 Ethyl bromide See Bromoethane, page 61
1Ò Glass bottle 1020-4340 E/0850/MC15
1Ò Metal can 1260-6707 E/0850/17
2.5 Ò Glass bottle 1008-0130 E/0850/PB17
2.5 Ò Coated Glass bottle 1040-9750 E/0850/PC17
2.5 Ò HDPE Plastic bottle 1144-8243 E/0850/21
E/0850/FP21
5 Ò Fluorinated HDPE Plastic bottle 1038-6370 E/0850/24
E/0850/25
5Ò Fluorinated HDPE square Drum 1040-9169 E/0850/27 Ethyl cinnamate Cat. No
10 Ò Metal can 1054-2334
25 Ò Metal drum 1061-7412 <1 ppm technical 1142-8253
200 Ò Metal drum 1077-3524 <1 ppm
<2 ppm packaging Density at 20°C: 1.045
C4H8O2 EINECS: 205-500-4 <1 ppm 25 mÒ Glass bottle EINECS: 203-104-6
CAS: 141-78-6 UN: 1173 <1 ppm C11H12O2
MW: 88.11 GHS: Flam. Liq. 2, Eye Irrit. <1 ppm CAS: 103-36-6
Density at 20°C: 0.902 2, STOT SE 3 <1 ppm MW: 176.22
Boiling point: 75 to 78 °C H225, H319, H336, EUH066
Melting point: -83.5 °C P261, P280, <20 APHA
Flash point: -4 °C P305+P351+P338, P210, P240
ADR/RID: 3, II
Assay (CG): >99% Ethyl digol See Diethylene glycol monoethyl ether, page 109
Guaranteed analysis
Acidity / Alkalinity <0.001 meq/g Magnesium (Mg)
Potassium (K)
Color <10 APHA Sodium (Na)
Total phosphorus (P)
Water <0.05% Total silicon (Si)
Total sulphur (S)
Residue after evaporation <50 ppm Zinc (Zn) Ethylenecarboxamide See Acrylamide, page 26
Substances darkened
Substances by H2SO4
reducing KMnO4 <0.001%
Calcium (Ca) <2 ppm
Copper (Cu) <1 ppm
Iron (Fe) <2 ppm
Lead (Pb) <1 ppm
Ethyl acetoacetate SLR
specified reagents for general laboratory work- extra pure Mfr. No
E/0950/08
packaging Cat. No E/0950/17
500 mÒ Glass bottle
2.5 Ò Glass bottle 1066-4722
1038-5700
C6H10O3
CAS: 141-97-9 Boiling point: 180 °C
MW: 130.15 Melting point: -45 °C
Density at 20°C: 1.03 Flash point: 70 °C
EINECS: 205-516-1
Assay (CG): >99%
125
E | Ethylenediaminetetraacetic acid
Ethylenediaminetetraacetic acid Certified AR Ethylenediaminetetraacetic acid disodium salt dihydrate
for analysis, EDTA for electrophoresis
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
100 g Plastic jar 1078-6281 D/0452/48 100 g Plastic jar 1002-0140 E/P140/48
250 g Plastic jar 1047-9740 D/0452/50 500 g Plastic jar 1003-0140 E/P140/53
5 kg Plastic keg 1057-8610 E/P140/65
C10H16N2O8 EINECS: 200-449-4
CAS: 60-00-4 GHS: Acute Tox. 4, Eye Irrit. 2 C10H14N2Na2O8.2H2O GHS: Acute Tox. 4
MW: 292.25 H319, H332 CAS: 6381-92-6 H332
Density at 20°C: 0.86 P264, P280, MW: 372.23 P304+P312
Melting point: 220 °C P305+P351+P338, P337+P313 Melting point: 252 °C
Flash point: >100 °C
Assay: > 99.5%
Assay: >99%
<0.1% Sodium (Na) <200 ppm Ethylenediaminetetraacetic acid disodium salt dihydrate
Guaranteed analysis <50 ppm Total chloride (Cl) <0.02%
Total phosphorus (P) Certified AR, Eur.Ph., BP
Loss on drying <5 ppm Total silicon (Si) <50 ppm for analysis
Calcium (Ca) <5 ppm Total sulphur (S) <50 ppm
Copper (Cu) <5 ppm Zinc (Zn) <50 ppm
Iron (Fe) <20 ppm <20 ppm
Lead (Pb) <50 ppm
Magnesium (Mg)
Potassium (K) <2 ppm Lithium (Li) <1 ppm packaging Cat. No Mfr. No
<1 ppm Manganese (Mn) <1 ppm D/0700/48
Typical analysis <2 ppm Molybdenum (Mo) <1 ppm 100 g Plastic jar 1033-5460 D/0700/50
<2 ppm Nickel (Ni) <1 ppm 250 g Plastic jar 1020-3570 D/0700/53
Aluminium (Al) <1 ppm Strontium (Sr) <2 ppm 500 g Plastic jar 1021-3570 D/0700/60
Silver (Ag) <1 ppm Titanium (Ti) <1 ppm 1 kg Plastic jar 1052-6383 D/0700/65
Arsenic (As) <1 ppm Vanadium (V) <1 ppm 5 kg Plastic keg 1147-3743 D/0700/68
Barium (Ba) 10 kg Plastic keg 1078-2544 D/0700/70
Cadmium (Cd) SLR 25 kg Fibre Keg 1076-7964
Chromium (Cr) <10 ppm
Cobalt (Co) Mfr. No C10H14N2Na2O8.2H2O EINECS: 205-358-3 <0.005%
D/0450/50 CAS: 6381-92-6 GHS: Acute Tox. 4 <50 ppm
Lot analysis on the label. D/0450/53 MW: 372.23 H332 <50 ppm
D/0450/68 Melting point: 252 °C P304+P312 <200 ppm
Ethylenediaminetetraacetic acid <20 ppm
<1000 ppm Assay: >99%
extra pure, EDTA <0.1% <1 ppm
Guaranteed analysis <1 ppm
packaging Cat. No <200 ppm 4 to 5 Potassium (K) <1 ppm
<200 ppm pH (aqueous solution 5%) <20 ppm Total chloride (Cl) <1 ppm
250 g Plastic jar 1033-5410 <200 ppm Calcium (Ca) Total phosphorus (P) <2 ppm
500 g Plastic jar 1008-0060 <100 ppm Copper (Cu) <2 ppm Total silicon (Si) <1 ppm
10 kg Plastic keg 1019-4613 Iron (Fe) <5 ppm Total sulphur (S) <1 ppm
Lead (Pb) <2 ppm Zinc (Zn)
C10H16N2O8 EINECS: 200-449-4 Magnesium (Mg) <10 ppm
CAS: 60-00-4 GHS: Acute Tox. 4, Eye Irrit. 2
MW: 292.25 H319, H332 Typical analysis <2 ppm Lithium (Li)
Density at 20°C: 0.86 P264, P280, <1 ppm Manganese (Mn)
Melting point: 220 °C P305+P351+P338, P337+P313 Aluminium (Al) <2 ppm Molybdenum (Mo)
Flash point: >100 °C Silver (Ag) <2 ppm Nickel (Ni)
<200 ppm Sodium (Na) Arsenic (As) <1 ppm Strontium (Sr)
Assay: >99% <20 ppm n-Butyl formate Barium (Ba) <1 ppm Titanium (Ti)
<20 ppm Total phosphorus (P) Cadmium (Cd) <1 ppm Vanadium (V)
Guaranteed analysis <20 ppm Total silicon (Si) Chromium (Cr)
Total sulphur (S) Cobalt (Co)
Calcium (Ca) <100 ppm Zinc (Zn)
Copper (Cu) <200 ppm Lot analysis on the label.
Iron (Fe)
Lead (Pb)
Magnesium (Mg)
Potassium (K)
Ethylenediaminetetraacetic acid diammonium salt SLR Ethylenediaminetetraacetic acid disodium salt dihydrate
specified reagents for general laboratory work- extra pure SLR
specified reagents for general laboratory work- extra pure
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
D/0650/48
100 g Plastic jar 1031-5510 D/0500/48 100 g Plastic jar 1067-5102 D/0650/50
25 kg Plastic keg 1193-5401 D/0500/70 250 g Plastic jar 1035-5410 D/0650/53
500 g Plastic jar 1070-6481 D/0650/60
(CH2.N(CH2.COOH).CH2 MW: 326.18 1 kg Plastic jar 1071-6481 D/0650/65
.COONH4)2+aq. Melting point: 215 to 217 °C 5 kg Plastic keg 1015-4663 D/0650/68
CAS: 20824-56-0 EINECS: 244-063-4 10 kg Plastic keg 1241-7620 D/0650/70
25 kg Fibre Keg 1191-6961
Guaranteed analysis <50 ppm
Complies with standard IR spectrum: Pass C10H14N2Na2O8.2H2O EINECS: 205-358-3 <0.05%
CAS: 6381-92-6 GHS: Acute Tox. 4
MW: 372.23 H332 <200 ppm
Melting point: 252 °C P304+P312 <200 ppm
<1000 ppm
Assay: >98% <100 ppm Potassium (K)
<10 ppm n-Butyl formate
Guaranteed analysis <20 ppm Total phosphorus (P)
<10 ppm Total silicon (Si)
Calcium (Ca) <50 ppm Total sulphur (S)
Copper (Cu)
Iron (Fe)
Lead (Pb)
Magnesium (Mg)
126
Ethanediol | E
Ethylenediaminetetraacetic acid disodium salt solution 0.2N Certified Ethylenediaminetetraacetic acid dipotassium salt dihydrate SLR
HPLC for electrochemical detection specified reagents for general laboratory work- extra pure
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
2.5 Ò Glass bottle 1013-1430 J/3710/17 D/0600/53
500 g Plastic jar 1073-6671 D/0600/70
C10H14N2Na2O8 Melting point: 237 to 245 °C 25 kg Fibre Keg 1194-5401
CAS: 139-33-3 EINECS: 205-358-3 <0.02%
MW: 336.21 C10H14K2N2O8.2H2O GHS: Skin Irrit. 2, Eye Irrit. 2, <200 ppm
CAS: 25102-12-9 STOT SE 3 <200 ppm
Guaranteed analysis Pass MW: 404.47 H319, H315, H335 <1000 ppm
Electrochemical test Melting point: 272 °C P261, P302+P352, P280, <100 ppm
EINECS: 217-895-0 P305+P351+P338
Tested by HPLC-EC to ensure low electrochemical response.
Detector - ESA Coulochem II Assay: >99% <100 ppm n-Butyl formate
Mode-oxidative <10 ppm Total phosphorus (P)
Graphite Electrode. Guaranteed analysis <20 ppm Total silicon (Si)
Lot analysis on the label. <10 ppm Total sulphur (S)
Filtered to 0.2 µm. Calcium (Ca) <50 ppm Zinc (Zn)
Copper (Cu)
Iron (Fe) <2000 ppm
Lead (Pb)
Magnesium (Mg)
Sodium (Na)
Ethylenediaminetetraacetic acid disodium salt solution 0.01M (0.02N) Ethylenediaminetetraacetic acid tetrasodium salt SLR
NIST Standard solution ready to use, For Volumetric analysis specified reagents for general laboratory work- extra pure
packaging Cat. No Mfr. No
1Ò HDPE Plastic bottle 1001-0190 J/3720/PB15 packaging Cat. No Mfr. No
2.5 Ò HDPE Plastic bottle 1076-4181 J/3720/17 D/0750/50
10 Ò Bag in box 1145-2714 J/3720/24 250 g Plastic jar 1007-0100
C10H14N2Na2O8 Melting point: 237 to 245 °C C10H12N2O8.4Na GHS: Acute Tox. 4, Eye Dam. 1
CAS: 139-33-3 EINECS: 205-358-3 CAS: 13235-36-4 H302, H318, H332
MW: 336.21 MW: 452.24 P301+P330+P331, P280,
Melting point: >300 °C P305+P351+P338, P310,
Manufactured to a tolerance of ± 0.3%. Flash point: >100 °C P301+P312
See the full range of Standard Volumetric solution page 323. EINECS: 200-573-9
Ethylenediaminetetraacetic acid disodium salt solution 0.01M (0.02N) Assay: >98% 10 to 11.5 Lead (Pb) <20 ppm
<20 ppm n-Butyl formate <0.1%
NIST Standard Concentrate, For Volumetric analysis Guaranteed analysis
pH (aqueous solution 5%)
Iron (Fe)
packaging Cat. No Mfr. No
1 Ampoule 1005-9981 J/3720C/05 Ethylene dibromide See 1, page 103
6 Ampoule 1049-7060
J/3720C/90
C10H14N2Na2O8 Melting point: 237 to 245 °C
CAS: 139-33-3 EINECS: 205-358-3 Ethylene dichloride See 1, page 105
MW: 336.21
Each ampoule makes 1 Ò of solution.
See the full range of Standard Volumetric solution page 323.
Ethylenediaminetetraacetic acid disodium salt solution (Ethylenedinitrilo)tetraacetic acid, disodium salt
See Ethylenediaminetetraacetic acid disodium salt solution, page 127
0.1M (0.2N) Eur.Ph. , BP
NIST Standard solution ready to use, For Volumetric analysis Ethanediol
packaging Cat. No Mfr. No specified reagents for general laboratory work- extra pure SLR
1Ò HDPE Plastic bottle 1055-8230 J/3700/15 packaging Cat. No Mfr. No
2.5 Ò HDPE Plastic bottle 1056-8230 J/3700/17 E/0350/PB08
10 Ò Bag in box 1000-0190 J/3700/24 500 mÒ HDPE Plastic bottle 1039-5700
1 Ò Glass bottle 1012-2000 E/0350/15
C10H14N2Na2O8 Melting point: 237 to 245 °C 2.5 Ò Glass bottle 1027-4430 E/0350/17
CAS: 139-33-3 EINECS: 205-358-3 2.5 Ò HDPE Plastic bottle 1034-6420 E/0350/PB17
MW: 336.21 25 Ò HDPE Plastic container 1000-0130 E/0350/25
Manufactured to a tolerance of ± 0.1%. C2H6O2 Flash point: 116 °C <2 ppm
See the full range of Standard Volumetric solution page 323. CAS: 107-21-1 EINECS: 203-473-3 <2 ppm
MW: 62.07 GHS: Acute Tox. 4 <10 ppm
Ethylenediaminetetraacetic acid trisodium salt solution 0.1M (0.2N) Density at 20°C: 1.113 H302 <5 ppm
Boiling point: 196 to 198 °C P280, P301+P310 <1 ppm
NIST Standard Concentrate, For Volumetric analysis Melting point: -13 °C <50 ppm
<2 ppm
Assay (CG): >99%
packaging Cat. No Mfr. No Guaranteed analysis <0.0005 meq/g Magnesium (Mg)
<20 APHA Potassium (K)
1 Ampoule 1031-7751 J/3700C/05 Acidity / Alkalinity <0.5% Sodium (Na)
6 Ampoule 1012-1430 J/3700C/90 Color <0.01% Total phosphorus (P)
Water <5 ppm Total silicon (Si)
C10H14N2Na3O8 Density at 20°C: 1.0 Residue after ignition <5 ppm Total sulphur (S)
CAS: 150-38-9 Melting point: 237 to 245 °C Calcium (Ca) <10 ppm Zinc (Zn)
MW: 358.19 EINECS: 205-758-8 Copper (Cu) <5 ppm
Iron (Fe)
Each ampoule makes 500 mÒ of solution. Lead (Pb)
See the full range of Standard Volumetric solution page 323.
127
E | Ethylene glycol ethyl ether Typical analysis <0.1 ppm Manganese (Mn) <0.01 ppm
<0.01 ppm Molybdenum (Mo) <0.01 ppm
Ethylene glycol ethyl ether Aluminium (Al) <0.01 ppm Nickel (Ni) <0.01 ppm
Barium (Ba) <0.01 ppm Strontium (Sr) <0.01 ppm
See 2-Ethoxyethanol, page 123 Cadmium (Cd) <0.01 ppm Titanium (Ti) <0.01 ppm
Chromium (Cr) <0.01 ppm Vanadium (V) <0.01 ppm
Ethylene glycol monobutyl ether Cobalt (Co)
Lithium (Li)
See 2-n-Butoxyethanol, page 69
Lot analysis on the label.
Ethylene glycol monoethyl ether acetate Ethyl methyl ketone SLR
See 2-Ethoxyethyl acetate, page 124 specified reagents for general laboratory work- extra pure
packaging Cat. No Mfr. No
E/1450/08
Ethylene glycol monomethyl ether 500 mÒ Glass bottle 1146-8253 E/1450/15
E/1450/17
See 2-Methoxyethanol, page 203 1 Ò Glass bottle 1005-0160 E/1450/PB17
E/1450/21
2.5 Ò Glass bottle 1035-5800 E/1450/25
E/1450/27
2.5 Ò Coated Glass bottle 1001-0130
<1 ppm
5 Ò Fluorinated HDPE Plastic bottle 1048-7250 <1 ppm
<2 ppm
Ethyl iodide See Iodoethane, page 161 25 Ò Metal drum 1010-2050 <1 ppm
<1 ppm
200 Ò Metal drum 1197-7693 <2 ppm
<1 ppm
Ethyl lactate SLR C4H8O EINECS: 201-159-0
CAS: 78-93-3 UN: 1193
specified reagents for general laboratory work- extra pure Mfr. No MW: 72.11 GHS: Flam. Liq. 2, Eye Irrit.
E/1400/17 Density at 20°C: 0.806 2, STOT SE 3
packaging Cat. No Boiling point: 80 °C H225, H319, H336, EUH066
Melting point: -87 °C P261, P280,
2.5 Ò Glass bottle 1019-2040 Flash point: -7 °C P305+P351+P338, P210, P240
ADR/RID: 3, II
CH3CH(OH).COO.C2H5 UN: 1192
CAS: 97-64-3 GHS: Flam. Liq. 3, Eye Dam. Assay (CG): >99%
MW: 118.14 1, STOT SE 3
Density at 25°C: 1.03 H226, H318, H335 Guaranteed analysis
Boiling point: 154 °C P261, P280,
Melting point: -23 °C P303+P361+P353, Acidity / Alkalinity <0.001 meq/g Magnesium (Mg)
Flash point: 46 °C P305+P351+P338, Potassium (K)
ADR/RID: 3, III P304+P340, P210 Color <20 APHA Sodium (Na)
EINECS: 202-598-0 Total phosphorus (P)
Water <0.2% Total silicon (Si)
Total sulphur (S)
Residue after evaporation <50 ppm Zinc (Zn)
Calcium (Ca) <2 ppm
Copper (Cu) <2 ppm
Iron (Fe) <5 ppm
Lead (Pb) <2 ppm
Assay (CG): >98% <100 ppm
Guaranteed analysis
Residue after evaporation
Ethyl methyl ketone Ethyl oleate
for analysis Certified AR pure, for saponification
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
500 mÒ Glass bottle 1078-6091 E/1460/08
1Ò Glass bottle 1037-6130 E/1455/15 C20H38O2 Boiling point: 190 to 210 °C
1Ò Coated Glass bottle 1145-3623 E/1455/PB15 CAS: 111-62-6 Flash point: 160 °C
2.5 Ò Glass bottle 1020-4100 MW: 310.52 EINECS: 203-889-5
2.5 Ò Coated Glass bottle 1000-0110 E/1455/17
25 Ò Metal drum 1062-0813 E/1455/PB17 Assay: 98 to 103% 75 to 84
200 Ò Metal drum 1191-7703
E/1455/25 Guaranteed analysis
EINECS: 201-159-0 E/1455/27 Iodine value
UN: 1193
C4H8O GHS: Flam. Liq. 2, Eye Irrit. Europium standard metal solution 1000 ppm
CAS: 78-93-3 2, STOT SE 3
MW: 72.11 H225, H319, H336, EUH066
Density at 20°C: 0.806 P261, P280,
Boiling point: 80 °C P305+P351+P338, P210, P240
Melting point: -87 °C
Flash point: -7 °C
ADR/RID: 3, II
Assay (CG): >99.5% for ICP solution in HNO3 2%, NIST certified
Guaranteed analysis packaging Cat. No Mfr. No
Acidity / Alkalinity <0.0005 meq/g Sodium (Na) <0.5 ppm 100 mÒ Plastic bottle 1191-9522 SPPLEU22Y
Total phosphorus (P) <0.1 ppm 500 mÒ Plastic bottle 1190-9522 SPPLEU22X
Color <20 APHA Total silicon (Si) <0.02 ppm
Total sulphur (S) <0.2 ppm
Water <0.1% Zinc (Zn) <0.1 ppm H315, H319
Acetone
Residue after evaporation <10 ppm Butan -2-ol <0.2%
Butyl acetate <0.02%
Butanedione : <1000 ppm Di-n-butyl ether <0.05%
Ethyl acetate <0.05%
2-Methylpropan-2-ol : <0.1% Methanol <0.05%
<0.05%
Calcium (Ca) <0.2 ppm Manufactured to a tolerance of ± 0.5%.
All standards are manufactured from acids, metals & metal salts and contain less
Copper (Cu) <0.02 ppm than <10 ppm total metal impurites.
See also the full range in the Standard Elemental solution for Trace metal analysis
Iron (Fe) <0.1 ppm section see page 314.
Check with your local distributor for availability of Spex product
Lead (Pb) <0.02 ppm
Magnesium (Mg) <0.05 ppm
Potassium (K) <0.5 ppm
128
Florisil | F
Fast Green FCF C.I. 42053 Ficodox® mixed COD reagent
pure, indicator grade pure
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
F/P025/46 J/4000/PB17
25 g Glass jar 1028-4670 2.5 Ò Coated Glass bottle 1057-8420
C37H34N2Na2O10S3 EINECS: 219-091-5 Boiling point: 280 °C H314, H340, H350
CAS: 2353-45-9 GHS: Muta. 2 ADR/RID: 8, II P280, P301+P330+P331,
MW: 808.85 H341 UN: 1830 P305+P351+P338,
Melting point: 290 °C P281 GHS: Carc. 1B, Muta. 1B, P302+P350, P201, P308+P313
Skin Corr. 1A
Guaranteed analysis
Complies with standard IR spectrum: Pass
Fehling’s solution No. 1 Guaranteed analysis
pure, to B.P. 1988 Dichromate demand (mÒ FeSO4) <2 mÒ
COD Test Reagents
Ficodox meets the DOE/NWC Standing Committee ot Analyst publication "Method
for the Examination of Waters and Associated Materials"- Chemical Oxygen De-
mand ( Dichromate value) of Polluted and Waste Waters- HMSO 1977.
packaging Cat. No Mfr. No
1 Ò HDPE Plastic bottle 1059-8040 J/3800/15
2.5 Ò HDPE Plastic bottle 1019-1470 J/3800/17
ADR/RID: 9, III H411 Ficodox® Plus mixed COD reagent
UN: 3082 P273
GHS: Aquatic Chronic 2 pure
Assay: 6.85 to 7.05% packaging Cat. No Mfr. No
Fehling’s solution 1 and 2 are to be mixed in equal volumes before use. 1 Ò Glass bottle 1043-7450 J/4010/15
1 mÒ is equivalent to 5 mg glucose. 2.5 Ò Coated Glass bottle 1018-1520 J/4010/PB17
ADR/RID: 8, II H314, H340, H350
UN: 1830 P280, P301+P330+P331,
GHS: Carc. 1B, Muta. 1B, P305+P351+P338,
Skin Corr. 1A P302+P350, P201, P308+P313
Fehling’s solution No. 2 Guaranteed analysis
pure, to B.P. 1988 Dichromate demand (mÒ FeSO4) <2 mÒ
packaging Cat. No Mfr. No COD Test reagents. Avoids the use of Mercury salt.
"Ficodox Plus "meets the DOE/NWC Standing Committee ot Analyst publication
1 Ò HDPE Plastic bottle 1010-1480 J/3900/15 "Method for the Examination of Waters and Associated Materials"- Chemical Oxy-
2.5 Ò HDPE Plastic bottle 1056-8420 J/3900/17 gen Demand ( Dichromate value) of Polluted and Waste Waters 1986( Second Edi-
tion) available from HMSO for the estimation of COD without the use of mercury
Density at 20°C: 1.24 H314 salts.
ADR/RID: 8, II P301+P330+P331, P280,
UN: 1719 P305+P351+P338, P310
GHS: Skin Corr. 1A, Eye Dam. 1
Fehling’s solution 1 and 2 are to be mixed in equal volumes before use.
1 mÒ is equivalent to 5 mg glucose.
Florisil®
For chromatography, about 100-200 U.S. Mesh
Fehling’s solution No. 1 packaging Cat. No Mfr. No
1018-2090 F/1173/50
pure, to Lane and Eynon modification 250 g Plastic jar
packaging Cat. No Mfr. No MgO3Si
CAS: 1343-88-0
1 Ò HDPE Plastic bottle 1045-0354 J/3910/PB15 MW: 100.39
2.5 Ò Glass bottle 1031-5950 J/3910/17 EINECS: 215-681-1
ADR/RID: 9, III H411 Guaranteed analysis : Pass
UN: 3082 P273 Identity test
GHS: Aquatic Chronic 2
Florisil® is a registered trade name of Floridin company.
Assay: 6.85 to 7.1%
Fehling’s solution 1 and 2 are to be mixed in equal volumes before use.
Fehling’s solution No. 2 Florisil®
pure, to Lane and Eynon modification For chromatography, about 60-100 U.S. Mesh
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
1020-4390 F/1170/50
250 g Plastic jar
1 Ò HDPE Plastic bottle 1060-9093 J/3920/PB15 129
2.5 Ò HDPE Plastic bottle 1011-1480 J/3920/17 MgO3Si
CAS: 1343-88-0
Density at 20°C: 1.24 H314 MW: 100.39
ADR/RID: 8, II P301+P330+P331, P280, EINECS: 215-681-1
UN: 1719 P305+P351+P338, P310
GHS: Skin Corr. 1A, Eye Dam. 1 Guaranteed analysis
Identity test : Pass
Fehling’s solution 1 and 2 are to be mixed in equal volumes before use. Florisil® is a registered trade name of Floridin company.
F | Fluorescein C.I. 45350
Fluorescein C.I. 45350 Fluoride standard 1000 ppm
pure For Ion chromatography in H2O, NIST certified
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
SPASF92Y
25 g Glass jar 1049-7250 F/1200/46 100 mÒ Plastic bottle 1196-9412 SPASF92X
100 g Glass jar 1059-8990 F/1200/48
500 mÒ Plastic bottle 1146-6108 Mfr. No
F/1350/08
C20H12O5 EINECS: 219-031-8 Manufactured to a tolerance of ± 0.3%.
CAS: 2321-07-5 GHS: Eye Irrit. 2, Skin Sens. 1 Check with your local distributor for availability of Spex product Mfr. No
MW: 332.31 H317, H319 F/1400/08
Melting point: 314 to 316 °C P280, P305+P351+P338
Mfr. No
Guaranteed analysis J/4100/08
Complies with standard IR spectrum: Pass
Fluoroboric acid 50% solution in HBF4
Technical
Fluorescein sodium packaging Cat. No
pure 500 mÒ HDPE Plastic bottle 1001-0170
packaging Cat. No Mfr. No HBF4 EINECS: 240-898-3
CAS: 16872-11-0 UN: 1775
100 g Glass jar 1009-0160 F/1300/48 MW: 87.81 GHS: Skin Corr. 1B, Eye Dam. 1
500 g Glass jar 1071-4951 F/1300/53 Density at 20°C: 1.41 H314
Boiling point: 130 °C P280, P301+P330+P331,
C20H10Na2O5 EINECS: 208-253-0 Melting point: -90 °C P310, P305+P351+P338,
CAS: 518-47-8 GHS: Eye Irrit. 2 ADR/RID: 8, II P303+P361+P353
MW: 376.28 H319
Melting point: 320 °C P280, P305+P351+P338
Guaranteed analysis
Complies with standard IR spectrum: Pass
Fluorescein di-(methylimino diacetic acid) sodium salt Fluorosilicic acid Cat. No
pure, Metal indicator ( Calcein ) Technical 1051-9000
packaging Cat. No Mfr. No packaging UN: 1778
F/1250/44 500 mÒ HDPE Plastic bottle GHS: Skin Corr. 1B, Eye Dam. 1
5 g Glass jar 1015-2140 H314
H2F6Si P280, P260, P264,
C30H26N2O13 2, Eye Irrit. 2, STOT SE 3 CAS: 16961-83-4 P301+P330+P331,
CAS: 1461-15-0 H312, H332, H335, H315, MW: 144.09 P305+P351+P338, P310
MW: 622.54 H302, H319 Density at 20°C: 1.27
Melting point: 200 °C P280, P261, P302+P352, ADR/RID: 8, II
EINECS: 215-957-1 P301+P312, P304+P340, EINECS: 241-034-8
GHS: Acute Tox. 4, Skin Irrit. P305+P351+P338
Guaranteed analysis Folin & Ciocalteu’s phenol reagent
Complies with standard IR spectrum: Pass
pure
Fluoride standard 10 ppm packaging Cat. No
For Ion chromatography in H2O, NIST certified 500 mÒ Glass bottle 1019-1520
packaging Cat. No Mfr. No ADR/RID: 8, II H314
UN: 1760 P280, P305+P351+P338
SPASF91AY GHS: Skin Corr. 1B, Eye Dam. 1
SPASF91AX
100 mÒ Plastic bottle 1193-9412 Contains 10% v / v HCl and 5% V / V H 3 PO 4.
500 mÒ Plastic bottle 1192-9412
Manufactured to a tolerance of ± 0.3%.
Check with your local distributor for availability of Spex product
Fluoride standard 100 ppm Formaldehyde solution 37-41% SLR
For Ion chromatography in H2O, NIST certified specified reagents for general laboratory work- extra pure Mfr. No
F/1501/PB08
packaging Cat. No Mfr. No packaging Cat. No F/1501/PB15
SPASF91Y F/1501/PB17
100 mÒ Plastic bottle 1195-9412 SPASF91X 500 mÒ HDPE Plastic bottle 1063-0813
1 Ò HDPE Plastic bottle 1023-1622 F/1501/25
500 mÒ Plastic bottle 1194-9412 Mfr. No 2.5 Ò HDPE Plastic bottle 1016-0052
J/4548/05 25 Ò HDPE Plastic container 1017-0052
Manufactured to a tolerance of ± 0.3%. J/4548/08
Check with your local distributor for availability of Spex product CH2O GHS: Flam. Liq. 3, Carc. 2,
CAS: 50-00-0 Acute Tox. 3, Skin Corr. 1B,
Fluoride standard solution 1000 ppm (1 mg/ml) MW: 30.03 Skin Sens. 1, STOT SE 1
Density at 20°C: 1.083 H226, H314, H317, H370,
for Ion pair chromatography, Ready-to-use Boiling point: 97 °C H311, H331, H301, H351
Melting point: -15 °C P280, P301+P330+P331,
packaging Cat. No Flash point: 50 °C P305+P351+P338,
100 mÒ HDPE Plastic bottle ADR/RID: 3, 8, III P304+P340, P302+P352,
500 mÒ HDPE Plastic bottle 1056-8040 EINECS: 200-001-8 P301+P312, P210
Density at 20°C: 1.0 1248-6400 UN: 1198
Manufactured to a tolerance of ± 1%. Assay: 37 to 41%
130
Formamide | F
Guaranteed analysis <0.05 meq/g Potassium (K) <5 ppm Formaldehyde solution
<20 APHA n-Butyl formate <0.005%
Acidity / Alkalinity <50 ppm Total silicon (Si) <10 ppm pure, 10% w/v in 0.9% sodium chloride solution
Color <2 ppm Total sulphur (S) <100 ppm
Calcium (Ca) <5 ppm Zinc (Zn) <10 ppm packaging Cat. No Mfr. No
Copper (Cu) <2 ppm Methanol 9 to 14% 1053-9190 F/1510/21
Iron (Fe) <20 ppm 5 Ò HDPE Plastic bottle
Lead (Pb)
Magnesium (Mg) GHS: Carc. 2, Skin Sens. 1
H317, H351
P280, P201, P302+P352, P262, P260, P308+P313
Formaldehyde solution (stabilised in methanol)
Technical
packaging Cat. No Mfr. No
2.5 Ò HDPE Plastic bottle 1059-1873 F/1451/PB17 Formamide
25 Ò HDPE Plastic container 1005-2142
F/1451/25 for electrophoresis
H.CHO Acute Tox. 3, Skin Corr. 1B,
CAS: 50-00-0 Skin Sens. 1, STOT SE 1 packaging Cat. No Mfr. No
MW: 30.03 H226, H314, H317, H370,
Boiling point: 97 °C H311, H331, H301, H351 100 mÒ Coated Glass bottle 1039-6180 F/P565/PB05
ADR/RID: 3, 8, III P280, P301+P330+P331, 500 mÒ Coated Glass bottle 1070-4951 F/P565/PB08
EINECS: 200-001-8 P305+P351+P338,
UN: 1198 P304+P340, P302+P352, CH3NO Flash point: 175 °C
GHS: Flam. Liq. 3, Carc. 2, P301+P312, P210 CAS: 75-12-7 EINECS: 200-842-0
MW: 45.04 GHS: Repr. 1B
Density at 20°C: 1.133 H360D
Boiling point: 210 °C P201, P308+P313
Melting point: 2 to 3 °C
Assay (CG): >99.5%
Assay: >37 to 41 %% Guaranteed analysis <0.1 ppm Lead (Pb) <0.5 ppm
<1 ppm Zinc (Zn) <0.5 ppm
Guaranteed analysis Copper (Cu)
Acidity / Alkalinity Iron (Fe)
<0.05 meq/g Suitable for denaturing nucleic acids for sequencing and hybridisation.
Formaldehyde dimethyl acetal Formamide Certified AR
See Dimethoxymethane, page 112 for analysis Mfr. No
F/1551/PB08
packaging Cat. No F/1551/PB17
Formaldehyde solution 500 mÒ Coated Glass bottle 1028-4620 F/1551/25
2.5 Ò Coated Glass bottle 1018-1470 F/1551/27
pure, 10% phosphate buffered 25 Ò HDPE Plastic container 1264-6707
200 Ò HDPE Plastic container 1199-1784 <5 ppm
packaging <5 ppm
5 Ò HDPE Plastic bottle Cat. No Mfr. No CH3NO Flash point: 175 °C <2 ppm
GHS: Carc. 2, Skin Sens. 1 1001-0150 F/1520/21 CAS: 75-12-7 EINECS: 200-842-0 <0.5 ppm
H351, H317 MW: 45.04 GHS: Repr. 1B <0.5 ppm
P201, P261, P281, P308+P313, P302+P352 Mfr. No Density at 20°C: 1.133 H360D <1 ppm
F/1515/25 Boiling point: 210 °C P201, P308+P313 <2 ppm
Melting point: 2 to 3 °C
<0.5%
Assay (CG): >99.5%
<0.1 ppm
Guaranteed analysis <0.1 ppm
<0.1 ppm
Color <10 APHA Magnesium (Mg) <0.1 ppm
Potassium (K) <0.1 ppm
Guaranteed analysis Water <0.1% Sodium (Na) <0.1 ppm
pH at 20°C Total phosphorus (P)
: 7.2 to 7.4 Ammonium formate (H.COO.NH4) : <0.1 Total silicon (Si)
% Total sulphur (S)
Zinc (Zn)
Formic acid (H. COOH) : <0.02% Residue after ignition
Calcium (Ca) <10 ppm
Formaldehyde solution saline Copper (Cu) <1 ppm
pure, phosphate buffered pH 7.3 Iron (Fe) <2 ppm
Lead (Pb) <0.5 ppm
packaging Cat. No Typical analysis <0.02 % Manganese (Mn)
<0.2 ppm Molybdenum (Mo)
25 Ò HDPE Plastic container 1004-0170 Formic acid (H. COOH) <0.2 ppm Nickel (Ni)
Aluminium (Al) <0.1 ppm Strontium (Sr)
GHS: Carc. 2, Skin Irrit. 2, Eye Irrit. 2, Skin Sens. 1, STOT SE 3 Barium (Ba) <0.2 ppm Titanium (Ti)
H317, H351, H315, H319, H335 Cadmium (Cd) <0.1 ppm Vanadium (V)
P280, P305+P351+P338, P260 Chromium (Cr) <0.1 ppm
Cobalt (Co)
Lithium (Li)
Lot analysis on the label.
A full range to discover on page 63
131
F | Formamide
Formamide SLR Assay: >98% <10 APHA Potassium (K) <0.5 ppm
<2 ppm Sodium (Na) <1 ppm
specified reagents for general laboratory work- extra pure Mfr. No Guaranteed analysis Total chloride (Cl)
F/1550/PB08 <0.05 ppm Total nitrogen (N) <0.0005%
packaging Cat. No F/1550/PB17 Color <0.05 ppm Total phosphorus (P) <20 ppm
Calcium (Ca) Total silicon (Si) <5 ppm
500 mÒ Coated Glass bottle 1016-1470 <20 ppm Chromium (Cr) <0.5 ppm Total sulphur (S) <2 ppm
2.5 Ò Coated Glass bottle 1017-1470 <50 ppm Copper (Cu) <0.05 ppm Zinc (Zn) <10 ppm
Iron (Fe) <0.1 ppm
CH3NO Flash point: 175 °C <2 ppm Lead (Pb) <0.1 ppm
CAS: 75-12-7 EINECS: 200-842-0 <2 ppm Magnesium (Mg) <0.05 ppm <0.02 ppm
MW: 45.04 GHS: Repr. 1B <5 ppm Nickel (Ni) <0.02 ppm
Density at 20°C: 1.133 H360D <10 ppm <0.1 ppm Manganese (Mn) <0.02 ppm
Boiling point: 210 °C P201, P308+P313 <1000% Typical analysis <0.02 ppm Molybdenum (Mo) <0.02 ppm
Melting point: 2 to 3 °C <0.05 ppm Strontium (Sr) <0.02 ppm
<20 APHA Potassium (K) Aluminium (Al) <0.05 ppm Titanium (Ti)
Assay (CG): >99% <0.5% Sodium (Na) Silver (Ag) <0.02 ppm Vanadium (V)
Total phosphorus (P) Barium (Ba) <0.02 ppm
Guaranteed analysis <50 ppm Total silicon (Si) Cadmium (Cd)
<5 ppm Total sulphur (S) Cobalt (Co)
Color Zinc (Zn) Lithium (Li)
Water <10 ppm Residue after ignition
Calcium (Ca) <2 ppm Lot analysis on the label.
Copper (Cu)
Iron (Fe) <20 ppm
Lead (Pb)
Magnesium (Mg)
Formic acid Optima Formic acid 90% Certified AR
for LC/MS analysis for analysis Mfr. No
F/1820/PB08
packaging Cat. No Mfr. No packaging Cat. No F/1820/PB17
0.5 mÒ Ampoule 1078-0320 A117-05AMP 500 mÒ HDPE Plastic bottle 1077-5711 <0.5 ppm
1 mÒ Ampoule 1047-3038 A117-1AMP 2.5 Ò HDPE Plastic bottle 1012-1570 <2 ppm
2 mÒ Ampoule 1006-3427 A117-2AMP
10x1 mÒ Ampoule 1079-7488 CH2O2 UN: 1779 <0.0005%
50 mÒ HDPE Plastic bottle 1059-6814 A117-10X1AMP CAS: 64-18-6 GHS: Flam. Liq. 3, Skin Corr. <200 ppm
A117-50 MW: 46.03 1A, Eye Dam. 1
CH2O2 UN: 1779 Density at 20°C: 1.22 H226, H314 <5 ppm
CAS: 64-18-6 GHS: Flam. Liq. 3, Skin Corr. Boiling point: 101 °C P280, P260, <2 ppm
MW: 46.02 1A, Eye Dam. 1 Melting point: 8 °C P301+P330+P331, <10 ppm
Density at 20°C: 1.22 H226, H314 Flash point: 50 °C P305+P351+P338, <0.1 ppm
Boiling point: 101 °C P280, P260, ADR/RID: 8, 3, II P302+P352, P210
Melting point: 8 °C P301+P330+P331, EINECS: 200-579-1 <0.02 ppm
Flash point: 50 °C P305+P351+P338, <0.02 ppm
ADR/RID: 8, 3, II P302+P352, P210 Assay: 89 to 91% <0.02 ppm
EINECS: 200-579-1 <0.02 ppm
Guaranteed analysis <10 APHA Potassium (K) <0.02 ppm
Assay: <99.5% <2 ppm Sodium (Na)
Color Total chloride (Cl)
Guaranteed analysis Calcium (Ca) <0.05 ppm Total nitrogen (N)
Chromium (Cr) <0.1 ppm Total phosphorus (P)
Color <10 APHA Lead (Pb) <10 ppb Copper (Cu) <0.5 ppm Total silicon (Si)
Magnesium (Mg) <10 ppb Iron (Fe) Total sulphur (S)
Reside after evaporation (at 0.1% Manganese (Mn) <10 ppb Lead (Pb) <0.05 ppm Zinc (Zn)
Nickel (Ni) <10 ppb Magnesium (Mg) <0.1 ppm
aqueous) : <1 ppm Potassium (K) <20 ppb Nickel (Ni)
Propan--1-ol <10 ppb <0.05 ppm
Sulfite (SO3) : <20 ppm Sodium (Na) <50 ppb Typical analysis
Aluminium (Al) <20 ppb Sulfate (SO4) <50 ppm
Zinc (Zn) <20 ppb Aluminium (Al)
Calcium (Ca) <50 ppb Silver (Ag) <0.1 ppm Manganese (Mn)
Barium (Ba) <0.02 ppm Molybdenum (Mo)
Chloride (Cl) <5 ppm Cadmium (Cd) <0.05 ppm Strontium (Sr)
Cobalt (Co) <0.05 ppm Titanium (Ti)
Copper (Cu) <10 ppb Lithium (Li) <0.05 ppm Vanadium (V)
<0.02 ppm
Iron (Fe) <10 ppb Lot analysis on the label.
Absorbance specification
Max. Absorbance (1cm cell v HPLC water)
210 nm <1.25 A.U. 254 nm <0.01 A.U.
220 nm
230 nm <0.85 A.U. LC/MS Gradient Suitability (at 0.1%
<0.55 A.U. aqueous) : Pass test
This product has been tested on an LC-MS Thermo Scientific instrument to ensure
suitability.
Formic acid Certified AR Formic acid SLR
for analysis extra pure, min.98% Mfr. No
F/1850/PB08
packaging Cat. No Mfr. No packaging Cat. No F/1850/PB17
500 mÒ Coated Glass bottle
1 Ò Coated Glass bottle 1055-9570 F/1900/PB08 500 mÒ Coated Glass bottle 1037-5990 F/1850/27
2.5 Ò Coated Glass bottle 1078-5711 F/1900/PB15 2.5 Ò Coated Glass bottle 1047-8020
25 Ò HDPE Plastic container 1014-1570 F/1900/PB17 200 Ò HDPE Plastic container 1198-1794
CH2O2 1079-2354
CAS: 64-18-6 F/1900/25 CH2O2 UN: 1779
MW: 46.02 UN: 1779 CAS: 64-18-6 GHS: Flam. Liq. 3, Skin Corr.
Density at 20°C: 1.22 GHS: Flam. Liq. 3, Skin Corr. MW: 46.02 1A, Eye Dam. 1
Boiling point: 101 °C 1A, Eye Dam. 1 Density at 20°C: 1.22 H226, H314
Melting point: 8 °C H226, H314 Boiling point: 101 °C P280, P260,
Flash point: 50 °C P280, P260, Melting point: 8 °C P301+P330+P331,
ADR/RID: 8, 3, II P301+P330+P331, Flash point: 50 °C P305+P351+P338,
EINECS: 200-579-1 P305+P351+P338, ADR/RID: 8, 3, II P302+P352, P210
P302+P352, P210 EINECS: 200-579-1
132
Assay: >98%
Fumaric acid | F
Guaranteed analysis <20 APHA Potassium (K) <2 ppm D(-)-Fructose Certified AR
<10 ppm Sodium (Na) <10 ppm
Color <0.5 ppm n-Butyl formate <0.002% for analysis Mfr. No
Calcium (Ca) Total phosphorus (P) <20 ppm F/1952/48
Chromium (Cr) <2 ppm Total silicon (Si) <10 ppm packaging Cat. No F/1952/53
Copper (Cu) <5 ppm Total sulphur (S) <50 ppm F/1952/60
Iron (Fe) <2 ppm Zinc (Zn) <0.5 ppm 100 g Plastic jar 1011-1620
Lead (Pb) <1 ppm 500 g Plastic jar 1048-8210 <10 ppm
Magnesium (Mg) <0.5 ppm SLR 1 kg Plastic jar 1057-9760 <50 ppm
Nickel (Ni) <0.001%
Mfr. No C6H12O6 Melting point: 103 to 105 °C <20 ppm
F/1800/PB08 CAS: 57-48-7 EINECS: 200-333-3
F/1800/PB17 MW: 180.16 <5 ppm
<50 ppm
F/1800/27 Guaranteed analysis
<2 ppm
Formic acid <2 ppm Loss on drying <0.5% Potassium (K) <0.025%
<10 ppm Sodium (Na)
specified reagents for general laboratory work- extra pure <0.002% Specific rotation -93.5° to -91° Total chloride (Cl) <0.5%
<20 ppm Total phosphorus (P)
<10 ppm Heavy metals <5 ppm Total silicon (Si) <1 ppm
<50 ppm Total sulphur (S) <1 ppm
<0.5 ppm Limit of Hydroxymethylfurfural test : Pass Zinc (Zn) <1 ppm
Sulfate (SO4) <1 ppm
packaging Cat. No Mfr. No Acidity Pass Residue after ignition <1 ppm
F/1750/PB15
500 mÒ HDPE Plastic bottle 1045-7830 F/1750/PB17 Calcium (Ca) <10 ppm Mfr. No
2.5 Ò HDPE Plastic bottle 1045-8020 F/1950/48
200 Ò HDPE Plastic container 1193-1794 F/1750/25 Copper (Cu) <1 ppm F/1950/50
CH2O2 UN: 1779 Iron (Fe) <1 ppm Mfr. No
CAS: 64-18-6 GHS: Flam. Liq. 3, Skin Corr. F/P770/46
MW: 46.02 1A, Eye Dam. 1 Lead (Pb) <1 ppm
Density at 20°C: 1.22 H226, H314
Boiling point: 101 °C P280, P260, Magnesium (Mg) <5 ppm
Melting point: 8 °C P301+P330+P331,
Flash point: 50 °C P305+P351+P338, Typical analysis <2 ppm Lithium (Li)
ADR/RID: 8, 3, II P302+P352, P210 <1 ppm Manganese (Mn)
EINECS: 200-579-1 Aluminium (Al) <1 ppm Nickel (Ni)
Arsenic (As) <1 ppm Titanium (Ti)
Assay: 89 to 91% Barium (Ba) <1 ppm Vanadium (V)
Cadmium (Cd) <1 ppm
Guaranteed analysis Chromium (Cr)
Cobalt (Co)
Color
Calcium (Ca) Lot analysis on the label.
Chromium (Cr)
Copper (Cu) <20 APHA Potassium (K) D(-)-Fructose
Iron (Fe) <10 ppm Sodium (Na)
Lead (Pb) <0.5 ppm n-Butyl formate pure
Magnesium (Mg) Total phosphorus (P)
Nickel (Ni) <2 ppm Total silicon (Si)
<5 ppm Total sulphur (S)
<2 ppm Zinc (Zn)
<1 ppm
<0.5 ppm packaging Cat. No
100 g Plastic jar 1148-2614
250 g Plastic jar 1034-6040
Formic acid C6H12O6 Melting point: 103 to 105 °C
CAS: 57-48-7 EINECS: 200-333-3
pure,about 85% MW: 180.16
packaging Guaranteed analysis
1 Ò HDPE Plastic bottle
2.5 Ò HDPE Plastic bottle Cat. No Complies with standard IR spectrum: Pass
25 Ò HDPE Plastic container
1011-4433 Fuchsin basic Cat. No
CH2O2 1015-1520
CAS: 64-18-6 1060-8153 technical 1007-0160
MW: 46.02
Density at 20°C: 1.22 UN: 1779 packaging EINECS: 211-189-6
Boiling point: 101 °C GHS: Flam. Liq. 3, Skin Corr. 25 g Glass jar UN: 3143
Melting point: 8 °C 1B, Eye Dam. 1 GHS: Carc. 2, Acute Tox. 4
Flash point: 50 °C H226, H314 C20H19N3.HCl H351, H302
ADR/RID: 8, 3, II P280, P260, CAS: 632-99-5 P281, P301+P312
EINECS: 200-579-1 P305+P351+P338, MW: 337.84
P301+P330+P331, Melting point: 250 °C
Assay: 84 to 86% P302+P352, P210 Flash point: 200 °C
ADR/RID: 6.1, III
Formic acid solution 0.25M Certified Pararosaniline
for HPLC
packaging Cat. No Mfr. No
500 mÒ Coated Glass bottle 1000-0112 J/4200/PB08
EINECS: 200-579-1
Fumaric acid SLR
Absorbance specification
Max. Absorbance (1cm cell v HPLC water) specified reagents for general laboratory work- extra pure Mfr. No
F/2070/53
Drift in gradient baseline <40 mA.U. packaging Cat. No
Absorbance of the largest eluted peak: <1.5 mA.U. 500 g Plastic jar 1077-5521
Molarity between 0.24 and 0.25 mol / Ò
C4H4O4 Flash point: 230 °C
Formol See Formaldehyde solution 37-41%, page 130 CAS: 110-17-8 EINECS: 203-743-0
MW: 116.07 GHS: Eye Irrit. 2
Density at 20°C: 1.62 H319
Melting point: 295 to 300 °C P280, P305+P351+P338
Assay: >99%
133
F | Furfuraldehyde
Furfuraldehyde D(+)Galactose anhydrous SLR
technical specified reagents for general laboratory work- extra pure Mfr. No
G/0050/48
packaging Cat. No Mfr. No packaging Cat. No
2.5 Ò Coated Glass bottle F/2080/PB17 100 g Plastic jar 1043-7830
1059-9760 C6H12O6 Melting point: 165 to 170 °C
C5H4O2 CAS: 59-23-4 EINECS: 200-416-4
CAS: 98-01-1 UN: 1199 MW: 180.16
MW: 96.09 GHS: Carc. 2, Acute Tox. 3, <0.5%
Density at 20°C: 1.16 Skin Irrit. 2, Eye Irrit. 2, Guaranteed analysis
Boiling point: 159 to 161 °C STOT SE 3 Loss on drying
Melting point: -36 °C H319, H331, H312, H315,
Flash point: 60 °C H335, H351, H301
ADR/RID: 6.1, 3, II P260, P280, P301+P310,
EINECS: 202-627-7 P304+P340, P302+P352,
P305+P351+P338
Gallium standard metal solution 1000 ppm
2.5-Furandione See Maleic anhydride, page 190 for ICP solution in HNO3 2%, NIST certified
packaging Cat. No Mfr. No
100 mÒ Plastic bottle 1198-9522 SPPLGA22Y
500 mÒ Plastic bottle 1197-9522 SPPLGA22X
Furfural See Furfuraldehyde , page 134 H315, H319
Fusion mixture Certified AR Manufactured to a tolerance of ± 0.5%.
All standards are manufactured from acids, metals & metal salts and contain less
for analysis Mfr. No than <10 ppm total metal impurites.
F/2250/53 See also the full range in the Standard Elemental solution for Trace metal analysis
F/2250/60 section see page 314.
Check with your local distributor for availability of Spex product
packaging Cat. No Gelatine SLR, Eur. Ph.
500 g Plastic jar 1031-6140 specified reagents for general laboratory work - extra pure, granular
1 kg Plastic jar 1061-6262
powder
K2CO3.Na2CO3 STOT SE 3
MW: 122.10 H315, H319, H335
EINECS: 207-838-8 P261, P280, P301+P312,
GHS: Skin Irrit. 2, Eye Irrit. 2, P302+P352, P305+P351+P338
Guaranteed analysis : <1% Total chloride (Cl) <0.002% packaging Cat. No Mfr. No
<100 ppm Total nitrogen (N) <20 ppm
Loss on drying 300°C Total phosphorus (P) <10 ppm 250 g Plastic jar 1144-2624 G/0150/50
Calcium (Ca) <5 ppm Total silicon (Si) <20 ppm 500 g Plastic jar 1077-4751 G/0150/53
Copper (Cu) <5 ppm Total sulphur (S) <10 ppm
Iron (Fe) <5 ppm Zinc (Zn) CAS: 9000-70-8
Lead (Pb) <10 ppm <5 ppm Density at 20°C: 0.68
Magnesium (Mg) EINECS: 232-554-6
Gadolinium standard metal solution 1000 ppm Gentian Violet See Methyl violet, page 208
for ICP solution in HNO3 2%, NIST certified
packaging Cat. No Mfr. No
100 mÒ Plastic bottle 1190-9532 SPPLGD22Y
500 mÒ Plastic bottle 1199-9522 SPPLGD22X
H315, H319 Germanium standard metal solution 1000 ppm
for ICP solution in H2O/HF trace, NIST certified
Manufactured to a tolerance of ± 0.5%. packaging Cat. No Mfr. No
All standards are manufactured from acids, metals & metal salts and contain less
than <10 ppm total metal impurites. 100 mÒ Plastic bottle 1194-9532 SPPLGE92Y
See also the full range in the Standard Elemental solution for Trace metal analysis
section see page 314. 500 mÒ Plastic bottle 1193-9532 SPPLGE92X
Check with your local distributor for availability of Spex product
Manufactured to a tolerance of ± 0.5%.
Gadolinium standard metal solution 10 000 ppm All standards are manufactured from acids, metals & metal salts and contain less
than <10 ppm total metal impurites.
See also the full range in the Standard Elemental solution for Trace metal analysis
section see page 314.
Check with your local distributor for availability of Spex product
for ICP solution in HNO3 5%, NIST certified
packaging Cat. No Mfr. No Germanium standard metal solution 10 ppm
100 mÒ Plastic bottle 1192-9532 SPPLGD23Y for ICP-MS solution in H2O/HF trace, NIST certified
500 mÒ Plastic bottle 1191-9532 SPPLGD23X
H314 packaging Cat. No Mfr. No
100 mÒ Plastic bottle 1146-5988 SPCLGE91AY
Manufactured to a tolerance of ± 0.5%. Manufactured to a tolerance of ± 0.5%.
All standards are manufactured from acids, metals & metal salts and contain less All standards are manufactured from acids, metals & metal salts and contain less
than <10 ppm total metal impurites. than <10 ppm total metal impurites.
See also the full range in the Standard Elemental solution for Trace metal analysis See also the full range in the Standard Elemental solution for Trace metal analysis
section see page 314. section see page 314.
Check with your local distributor for availability of Spex product Check with your local distributor for availability of Spex product
134
L(+)-Glutamic acid-5-amide | G
Gibberellic acid D(+)-Glucose anhydrous SLR
pure specified reagents for general laboratory work- extra pure
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
G/0200/43 G/0450/53
1 g Vial 1050-9000 500 g Plastic jar 1033-5850 G/0450/60
1 kg Plastic jar 1039-5890 G/0450/61
C19H22O6 GHS: Skin Corr. 1B, Eye Dam. 1 2 kg Plastic jar 1025-4480 G/0450/65
CAS: 77-06-5 H314 5 kg Plastic keg 1053-9380
MW: 346.38 P301+P330+P331, P280, <100 ppm
Melting point: 227 °C P305+P351+P338, P310 C6H12O6 Density at 20°C: 15.4 <200 ppm
EINECS: 201-001-0 CAS: 50-99-7 Melting point: 146 °C
MW: 180.16 EINECS: 200-075-1 <0.02%
Guaranteed analysis <50 ppm
Complies with standard IR spectrum: Pass Guaranteed analysis <20 ppm
<100 ppm
Giemsa stain Cat. No Mfr. No Loss on drying <1% Potassium (K) <20 ppm
1024-4530 G/0275/46 Specific rotation 52° to 54° Sodium (Na)
pure Calcium (Ca) <50 ppm n-Butyl formate
Copper (Cu) Total phosphorus (P)
packaging Iron (Fe) <5 ppm Total silicon (Si)
25 g Glass jar Lead (Pb) <10 ppm Total sulphur (S)
CAS: 51811-82-6 Magnesium (Mg) Zinc (Zn)
Melting point: 300 °C <2 ppm
EINECS: 257-438-2 <20 ppm
Guaranteed analysis D(+)-Glucose monohydrate SLR, Eur.Ph.,BP
Complies with standard IR spectrum: Pass
specified reagents for general laboratory work- extra pure
packaging Cat. No Mfr. No
G/0400/60
Glass balls 1 kg Plastic jar 1052-9190 G/0400/65
5 kg Plastic keg 1146-3743
pure, 3.7-4.1 mm undrilled <1 ppm
C6H12O6.H2O Density at 20°C: 1.54 <200 ppm
CAS: 5996-10-1 EINECS: 200-075-1 <125 ppm
MW: 198.18 <0.5 ppm
packaging Cat. No Mfr. No <200 ppm
250 g Plastic jar Guaranteed analysis
500 g Plastic jar 1037-5750 G/0300/50 <0.1%
Guaranteed analysis 1073-5331 G/0300/53 Acidity / Alkalinity Pass Barium (Ba)
Identity test Calcium (Ca)
Loss on drying 7 to 9.5% Chloride (Cl)
Lead (Pb)
: Pass Specific rotation 52° to 53° Sulfate (SO4)
Residue after ignition
Foreign sugars/Starch/Dextrins (test) :
Pass
D(+)-Glucose anhydrous Certified AR, Eur.Ph.,BP,USP Sulfite (SO3) : <15 ppm
Arsenic (As) <1 ppm
for analysis
packaging Cat. No Mfr. No
500 g Plastic jar 1014-1520 G/0500/53 Glucose-1-phosphoric acid dipotassium salt dihydrate
1 kg Plastic jar 1037-3242 G/0500/60
2 kg Plastic jar 1038-5940 G/0500/61 technical
5 kg Plastic keg 1039-5940 G/0500/65
25 kg Fibre Keg 1026-4392 G/0500/70 packaging Cat. No Mfr. No
1145-2624 G/0505/55
2 g Vial
C6H12O6 Density at 20°C: 15.4
CAS: 50-99-7 Melting point: 146 °C C6H11K2O9P.2H2O
MW: 180.16 EINECS: 200-075-1 CAS: 5996-14-5
MW: 372.35
Guaranteed analysis Melting point: 209 °C
pH (aqueous solution 5%) >6 Magnesium (Mg) <5 ppm Guaranteed analysis
Potassium (K) <20 ppm Complies with standard IR spectrum: Pass
Loss on drying <0.1% Sodium (Na) <50 ppm
Total chloride (Cl) <0.005% L-Glutamic acid
Specific rotation 52.5° to 53.5° Total phosphorus (P) <10 ppm
Total silicon (Si) specified reagents for general laboratory work- extra pure
Insoluble in alcohol : <0.005% Total sulphur (S) <5 ppm
Zinc (Zn) <20 ppm
Calcium (Ca) <10 ppm
<5 ppm
Copper (Cu) <1 ppm
Iron (Fe) <2 ppm SLR
Lead (Pb) <0.5 ppm
Typical analysis <2 ppm Lithium (Li) <0.2 ppm packaging Cat. No Mfr. No
<1 ppm Manganese (Mn) <0.2 ppm 1146-2624 G/0515/48
Aluminium (Al) <1 ppm Nickel (Ni) <0.5 ppm 100 g Plastic jar
Arsenic (As) <1 ppm Titanium (Ti) <0.5 ppm
Barium (Ba) <0.5 ppm Vanadium (V) <0.5 ppm C5H9NO5
Cadmium (Cd) <0.5 ppm CAS: 56-86-0
Chromium (Cr) MW: 147.13
Cobalt (Co) Melting point: 205 °C
Lot analysis on the label. Assay: >98.5%
Guaranteed analysis <0.5% Lead (Pb) <10 ppm
Water 30° to 33° Residue after ignition <0.5%
Specific rotation <20 ppm
Iron (Fe)
L(+)-Glutamic acid-5-amide
See L-Glutamine, page 136
135
G | L-Glutamic acid monosodium salt monohydrate
L-Glutamic acid monosodium salt monohydrate Glycerol Certified AR
pure for analysis
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
250 g Plastic jar 1066-5682 G/0513/50 G/0650/08
C5H8NO4Na.H2O 500 mÒ HDPE Plastic bottle 1057-9570 G/0650/15
CAS: 142-47-2 1Ò HDPE Plastic bottle 1265-6707 G/0650/17
MW: 187.14 2.5 Ò HDPE Plastic bottle 1079-5711 G/0650/21
EINECS: 205-538-1 5Ò Fluorinated HDPE Plastic bottle 1266-6707 G/0650/25
25 Ò HDPE Plastic container 1021-4580 G/0650/27
Assay: >98% 200 Ò HDPE Plastic container 1191-1834
<2 ppm
L-Glutamine SLR HOCH2CH(OH)CH2OH Boiling point: 290 °C <5 ppm
CAS: 56-81-5 Melting point: 18 °C <20 ppm
specified reagents for general laboratory work- extra pure Mfr. No MW: 92.09 Flash point: 160 °C <2 ppm
G/0514/50 Density at 20°C: 1.261 EINECS: 200-289-5 <2 ppm
<5 ppm
Assay: >99% <2 ppm
packaging Cat. No Guaranteed analysis <10 APHA Magnesium (Mg) Pass
250 g Plastic jar <0.5% Potassium (K) <0.08%
C5H10N2O3 1003-0150 Color : 6 to 8 Sodium (Na)
CAS: 56-85-9 Water Total phosphorus (P) Pass
MW: 146.15 Melting point: 185 °C pH (10% aq. soln.) <0.005% Total silicon (Si)
EINECS: 200-292-1 Residue after ignition : Pass Total sulphur (S) <0.5 ppm
Assay: >99% Identity IR test Zinc (Zn) <0.5 ppm
Calcium (Ca) <5 ppm Reducing substance <0.5 ppm
Glutaraldehyde 50% solution SLR Chloride (Cl) <0.0005% Esters of fatty acids <0.5 ppm
Copper (Cu) <0.5 ppm Fatty acids <0.5 ppm
specified reagents for general laboratory work- extra pure Iron (Fe)
Lead (Pb) <1 ppm SLR
<0.5 ppm
Mfr. No
packaging Cat. No Mfr. No Typical analysis <0.5 ppm Lithium (Li) G/0600/08
G/0518/PB08 <0.5 ppm Manganese (Mn) G/0600/17
500 mÒ Coated Glass bottle 1020-4630 Aluminium (Al) <0.5 ppm Nickel (Ni) G/0600/25
Arsenic (As) <0.5 ppm Titanium (Ti)
C5H8O2 GHS: Acute Tox. 3, Skin Barium (Ba) <0.5 ppm Vanadium (V) <10 ppm
CAS: 111-30-8 Corr. 1B, Eye Dam. 1, Resp. Cadmium (Cd) <0.5 ppm <20 ppm
MW: 100.12 Sens. 1, Skin Sens. 1, STOT Chromium (Cr) <100 ppm
Density at 20°C: 1.13 SE 3, Aquatic Acute 1 Cobalt (Co) <10 ppm
Boiling point: >100 °C H317, H335, H314, H334, <10 ppm
Melting point: -15 °C H301, H331, H400 Glycerol <10 ppm
ADR/RID: 6.1, 8, II P280, P305+P351+P338, <10 ppm
EINECS: 203-856-5 P270, P260, P273, P308+P313 specified reagents for general laboratory work- extra pure
UN: 2927 Mfr. No
G/P460/53
Assay: 47 to 53% packaging Cat. No
Glycerine See Glycerol, page 136 500 mÒ HDPE Plastic bottle 1067-5872
2.5 Ò HDPE Plastic bottle 1033-6040
25 Ò HDPE Plastic container 1068-5872
HOCH2CH(OH)CH2OH Boiling point: 290 °C
CAS: 56-81-5 Melting point: 18 °C
MW: 92.09 Flash point: 160 °C
Density at 20°C: 1.261 EINECS: 200-289-5
Glycerol Assay (CG): >98% : 6 to 8 Magnesium (Mg)
<0.01% Potassium (K)
for electrophoresis Guaranteed analysis <20 ppm Sodium (Na)
<0.001% Total phosphorus (P)
packaging Cat. No Mfr. No pH (10% aq. soln.) <2 ppm Total silicon (Si)
Residue after ignition <5 ppm Total sulphur (S)
100 mÒ Glass bottle 1049-7440 G/P450/05 Calcium (Ca) <2 ppm Zinc (Zn)
500 mÒ Glass bottle 1040-7450 G/P450/08 Chloride (Cl)
Copper (Cu)
Iron (Fe)
Lead (Pb)
HOCH2CH(OH)CH2OH Boiling point: 290 °C Glycine, Buffer component
CAS: 56-81-5 Melting point: 18 °C
MW: 92.09 Flash point: 160 °C for electrophoresis and blotting
Density at 20°C: 1.261 EINECS: 200-289-5
For use in electrophoresis buffers and for stabilising enzyme preparations before free- packaging Cat. No
zing. 500 g Plastic jar
NH2CH2COOH 1008-0160
CAS: 56-40-6
MW: 75.07 Density at 20°C: 1.595
Melting point: 182 to 236 °C
Assay: > 99.5% EINECS: 200-272-2
Read more page 24 A full range to discover on page 63
136
Guaiacol | G
Glycine Certified AR Gold standard metal solution 1000 ppm
for analysis for ICP-MS solution in HCl 2%, NIST certified
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
100 g Plastic jar 1010-1620 G/0800/48 100 mÒ Plastic bottle 1141-5978 SPCLAU11Y
250 g Plastic jar 1058-9760 G/0800/50
1 kg Plastic jar 1007-0150 G/0800/60 Manufactured to a tolerance of ± 0.5%.
All standards are manufactured from acids, metals & metal salts and contain less
NH2CH2COOH Boiling point: 233 °C than <10 ppm total metal impurites.
CAS: 56-40-6 Melting point: 182 to 236 °C See also the full range in the Standard Elemental solution for Trace metal analysis
MW: 75.07 EINECS: 200-272-2 section see page 314.
Density at 20°C: 1.595 Check with your local distributor for availability of Spex product
Assay: >99% 5.5 to 6.5 Potassium (K) <20 ppm Gold metal Cat. No Mfr. No
<0.02% Sodium (Na) <50 ppm 1147-2624 G/0850/90
Guaranteed analysis Total chloride (Cl) <0.001% technical Boiling point: 2700 °C
<10 ppm Total phosphorus (P) <10 ppm Melting point: 1064.8 °C
pH (aqueous solution 5%) <2 ppm Total silicon (Si) packaging EINECS: 231-165-9
Ammonium (NH4) <5 ppm Total sulphur (S) <5 ppm 25 Plastic jar
Calcium (Ca) <1 ppm Zinc (Zn) <50 ppm Au : Pass
Copper (Cu) <5 ppm CAS: 7440-57-5
Iron (Fe) <2 ppm MW: 196.97
Lead (Pb) <2 ppm Lithium (Li) Guaranteed analysis
Magnesium (Mg) <2 ppm Manganese (Mn) <1 ppm Identity test
<1 ppm Nickel (Ni) <1 ppm
Typical analysis <1 ppm Titanium (Ti) <1 ppm Gram’s iodine
<1 ppm Vanadium (V) <1 ppm
Aluminium (Al) <1 ppm pure
Barium (Ba)
Cadmium (Cd)
Chromium (Cr)
Cobalt (Co)
Lot analysis on the label.
Glycolic acid SLR packaging Cat. No Mfr. No
250 mÒ Glass bottle 1018-1660 G/0910/07
specified reagents for general laboratory work- extra pure Mfr. No CAS: 7553-56-2
G/0803/48 EINECS: 231-442-4 : Pass Mfr. No
packaging Cat. No G/0900/60
1035-6040 Guaranteed analysis Cat. No
100 g Plastic jar EINECS: 201-180-5 Identity test 1033-6090
UN: 3261 H319, H335
C2H4O3 GHS: Acute Tox. 3, Skin Graphite powder P261, P280, P305+P351+P338
CAS: 79-14-1 Corr. 1B, Eye Dam. 1
MW: 76.05 H302, H314, H331 pure : Pass
Density at 260°C: 1.36 P301+P330+P331, P280,
Boiling point: 100 °C P305+P351+P338, P310, packaging
Melting point: 72 to 80 °C P304+P340, P301+P312 1 kg Plastic jar
Flash point: >300 °C CAS: 7782-42-5
ADR/RID: 8, II <1% EINECS: 231-955-3
GHS: Eye Irrit. 2, STOT SE 3
Assay: >99%
Guaranteed analysis
Guaranteed analysis Identity test
Water
Gold standard metal solution 1000 ppm Guaiacol SLR
for AAS, solution HCl 1M specified reagents for general laboratory work- extra pure Mfr. No
G/0950/48
packaging Cat. No Mfr. No packaging Cat. No
1013-1670 J/8028/08
500 mÒ HDPE Plastic bottle
100 g Glass bottle 1072-6101
GHS: Skin Irrit. 2
H315 C7H8O2 EINECS: 201-964-7
P302+P352 CAS: 90-05-1 GHS: Acute Tox. 4, Skin Irrit.
MW: 124.14 2, Eye Irrit. 2
Manufactured to a tolerance of ± 0.5%. Density at 20°C: 1.12 H302, H315, H319
See also the full range in the Standard Elemental solution for Trace metal analysis Boiling point: 205 °C P301+P312, P302+P352,
section see page 314. Melting point: 27 to 29 °C P280, P305+P351+P338
Flash point: 82 °C
Gold standard metal solution 1000 ppm Guaranteed analysis
Complies with standard IR spectrum: Pass
for ICP solution in HCL 10%, NIST certified
Conforming to the IR spectrum of reference.
packaging Cat. No Mfr. No
100 mÒ Plastic bottle
500 mÒ Plastic bottle 1192-9452 SPPLAU32Y
1191-9452 SPPLAU32X
H315, H319, H335
Manufactured to a tolerance of ± 0.5%. See page 308 for more information
All standards are manufactured from acids, metals & metal salts and contain less
than <10 ppm total metal impurites.
See also the full range in the Standard Elemental solution for Trace metal analysis
section see page 314.
Check with your local distributor for availability of Spex product
137
G | Guanidine thiocyanate
Guanidine thiocyanate Haematoxylin
technical, strong protein denaturant pure
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
G/P771/48 H/0010/46
100 g Plastic jar 1043-7640 25 g Glass jar 1018-1710
CH5N3.CHNS Corr. 1C, Eye Dam. 1, Aqua- C16H14O6.xH2O Melting point: 100 to 120 °C
CAS: 593-84-0 tic Chronic 3 CAS: 517-28-2 EINECS: 208-237-3
MW: 118.16 H312, H332, H302, H412, MW: 302.27
Melting point: 118 to 122 °C H314, EUH032
ADR/RID: 8, III P280, P301+P330+P331, Guaranteed analysis
EINECS: 209-812-1 P305+P351+P338, P310, Complies with standard IR spectrum: Pass
UN: 3261 P302+P352, P273, P233
GHS: Acute Tox. 4, Skin
Assay: >97%
N-Heptafluorobutyryl-imidazole
pure
Gum acacia Cat. No Mfr. No packaging Cat. No Mfr. No
1062-6262 G/1050/53 H/0095/45
pure, powder H335, H315, H317, H319, H334 5 g Glass bottle 1079-4941
P304+P341, P342+P311, Certified
packaging P261, P302+P352, P280, C7H3F7N2O STOT SE 3
500 g Plastic jar P305+P351+P338 CAS: 32477-35-3 H319, H335, H315
Density at 20°C: 1.35 MW: 264.10 P280, P261, P302+P352,
EINECS: 232-519-5 : Pass EINECS: 251-063-8 P304+P340,
GHS: Skin Irrit. 2, Eye Irrit. 2, GHS: Skin Irrit. 2, Eye Irrit. 2, P305+P351+P338, P312
Resp. Sens. 1, Skin Sens. 1,
STOT SE 3 Assay (CG): >98%
Guaranteed analysis Heptane (approx. 99% n-Heptane)
Identity test
for HPLC
Gum tragacanth Cat. No Mfr. No packaging Cat. No Mfr. No
1037-6180 G/1100/48
pure, powder 1 Ò Glass bottle 1066-4912 H/0106/15
2.5 Ò Glass bottle 1059-8800 H/0106/17
packaging 2.5 Ò Coated Glass bottle 1075-7704 H/0106/PB17
100 g Plastic jar 10 Ò Returnable Drum 1267-6707 H/0106/10RSS
Guaranteed analysis 25 Ò Returnable Drum 1268-6707 H/0106/25RSS
Identity test 30 Ò Returnable Drum 1269-6707 H/0106/30RSS
: Pass C7H16 UN: 1206
CAS: 142-82-5 GHS: Flam. Liq. 2, Skin Irrit.
Hafnium standard metal solution 1000 ppm MW: 100.21 2, STOT SE 3, Asp. Tox. 1,
Density at 20°C: 0.683 Aquatic Acute 1, Aquatic
for ICP solution in HCL 2%, NIST certified Boiling point: 98 °C Chronic 1
Melting point: -91 °C H225, H315, H336, H304,
Flash point: -4 °C H400, H410
ADR/RID: 3, II P261, P301+P310, P331,
EINECS: 205-563-8 P273, P302+P352, P210
packaging Cat. No Mfr. No
100 mÒ Plastic bottle 1196-9532 SPPLHF12Y Guaranteed analysis
500 mÒ Plastic bottle 1195-9532 SPPLHF12X Acidity / Alkalinity <0.00015 meq/g Residue after evaporation <5 ppm
Water <0.01%
Manufactured to a tolerance of ± 0.5%. 230 nm <0.02 A.U.
All standards are manufactured from acids, metals & metal salts and contain less Absorbance specification 240 nm <0.01 A.U.
than <10 ppm total metal impurites. Max. Absorbance (1cm cell v HPLC water) 250 nm <0.005 A.U.
See also the full range in the Standard Elemental solution for Trace metal analysis
section see page 314. 200 nm <0.25 A.U.
Check with your local distributor for availability of Spex product 210 nm <0.1 A.U.
220 nm
<0.05 A.U.
Lot analysis on the label.
Filtered to 0.2 µm.
Heat sensitive liquid
technical, contains methylated spirit
packaging Cat. No Mfr. No
H/0050/PB15
1 Ò Coated Glass bottle 1040-8410
Density at 20°C: 0.8 Tox. 4, Resp. Sens. 1, Skin
Boiling point: 63.9 °C Sens. 1, STOT SE 2, Aquatic
Melting point: -97.8 °C Chronic 2
Flash point: 11.1 °C H225, H302, H371, H411,
ADR/RID: 3, II H341, H350, H334, H317,
EINECS: 200-578-6 H332, H350i, H360F
UN: 1170 P261, P280, P308+P313,
GHS: Flam. Liq. 2, Carc. 1B, P301+P312, P210, P273
Muta. 2, Repr. 1B, Acute
Guaranteed analysis : Pass
Identity test
138
n-Heptane | H
Heptane (approx. 99% n-Heptane) Certified n-Heptane Certified AR
HPLC for fluorescence detection for analysis
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
H/0160/08
1 Ò Glass bottle 1068-4912 H/0107/15 500 mÒ Glass bottle 1044-7830 H/0160/15
2.5 Ò Glass bottle 1035-5750 H/0107/17 1Ò Glass bottle 1000-0170 H/0160/17
2.5 Ò Glass bottle 1078-4751 H/0160/21
C7H16 UN: 1206 5Ò Fluorinated HDPE Plastic bottle 1079-4751 H/0160/FP21
CAS: 142-82-5 GHS: Flam. Liq. 2, Skin Irrit. 5Ò Fluorinated HDPE square Drum 1051-4389 H/0160/27
MW: 100.21 2, STOT SE 3, Asp. Tox. 1, 200 Ò Metal drum 1038-2542
Density at 20°C: 0.683 Aquatic Acute 1, Aquatic <0.05 ppm
Boiling point: 98 °C Chronic 1 C7H16 UN: 1206 <0.1 ppm
Melting point: -91 °C H225, H315, H336, H304, CAS: 142-82-5 GHS: Flam. Liq. 2, Skin Irrit. <0.5 ppm
Flash point: -4 °C H400, H410 MW: 100.21 2, STOT SE 3, Asp. Tox. 1, <0.1 ppm
ADR/RID: 3, II P261, P301+P310, P331, Density at 20°C: 0.683 Aquatic Acute 1, Aquatic
EINECS: 205-563-8 P273, P302+P352, P210 Boiling point: 98 °C Chronic 1 <0.05 ppm
Melting point: -91 °C H225, H315, H336, H304, <10 ppm
Flash point: -4 °C H400, H410 <0.2 ppm
ADR/RID: 3, II P261, P301+P310, P331, <10 APHA
EINECS: 205-563-8 P273, P302+P352, P210
<0.02 ppm
Assay (CG): >99% <0.02 ppm
<0.02 ppm
Guaranteed analysis <0.01% Residue after evaporation <5 ppm <0.02 ppm
Water <0.02 ppm
<0.02 ppm
Absorbance specification Assay (CG): >99.5%
Max. Absorbance (1cm cell v HPLC water) SLR
200 nm <0.25 A.U. 240 nm <0.01 A.U. Guaranteed analysis Mfr. No
210 nm <0.1 A.U. 250 nm <0.005 A.U. H/0155/08
220 nm Fluorescence Acidity <0.0001 meq/g Magnesium (Mg) H/0155/15
230 nm <0.05 A.U. Pass Potassium (K) H/0155/17
<0.02 A.U. Color <10 APHA Sodium (Na) H/0155/PB17
Total phosphorus (P) H/0155/21
Water <0.02% Total silicon (Si) H/0155/FP21
Total sulphur (S) H/0155/25
Fluorescence Residue after evaporation <10 ppm Zinc (Zn) H/0155/27
Excitation in the range 250-270nm produces no fluorescence emission greater than Substances darkened
the solvents natural Raman signal at 350nm excitation. Bromine number <0.5 by H2SO4
Thi sis equivalent to the emission maximum of approximately 1 ppb quinine sulfate.
Lot analysis on the label ( Excluding fluorescence scan). Calcium (Ca) <0.5 ppm Manganese (Mn)
Filtered to 0.2 µm. Molybdenum (Mo)
Copper (Cu) <0.02 ppm Nickel (Ni)
Strontium (Sr)
Iron (Fe) <0.1 ppm Titanium (Ti)
Vanadium (V)
Lead (Pb) <0.02 ppm
Heptane Typical analysis <0.1 ppm
<0.02 ppm
For peptide sequencing, (approx 99% n-Heptane) Aluminium (Al) <0.02 ppm
Barium (Ba) <0.02 ppm
packaging Cat. No Mfr. No Cadmium (Cd) <0.02 ppm
H/0110/17 Chromium (Cr) <0.02 ppm
2.5 Ò Glass bottle 1068-5102 Cobalt (Co)
Lithium (Li)
C7H16 UN: 1206
CAS: 142-82-5 GHS: Flam. Liq. 2, Skin Irrit. Lot analysis on the label.
MW: 100.21 2, STOT SE 3, Asp. Tox. 1,
Density at 20°C: 0.683 Aquatic Acute 1, Aquatic n-Heptane
Boiling point: 98 °C Chronic 1
Melting point: -91 °C H225, H315, H336, H304, specified reagents for general laboratory work- extra pure
Flash point: -4 °C H400, H410
ADR/RID: 3, II P261, P301+P310, P331, packaging Cat. No
EINECS: 205-563-8 P273, P302+P352, P210
500 mÒ Glass bottle 1041-7450
1 Ò Glass bottle 1260-6717
2.5 Ò Glass bottle 1023-4530
2.5 Ò Coated Glass bottle 1261-6717
5 Ò Fluorinated HDPE Plastic bottle 1041-7640
5 Ò Fluorinated HDPE square Drum 1023-2790
Guaranteed analysis 25 Ò Metal drum 1036-5750
Acidity / Alkalinity <0.0002 meq/g Residue after evaporation <2 ppm 200 Ò Metal drum 1202-5440
Water <0.02% 250 nm <0.005 A.U.
C7H16 UN: 1206
Absorbance specification CAS: 142-82-5 GHS: Flam. Liq. 2, Skin Irrit.
Max. Absorbance (1cm cell v HPLC water) MW: 100.21 2, STOT SE 3, Asp. Tox. 1,
Density at 20°C: 0.683 Aquatic Acute 1, Aquatic
200 nm <1 A.U. Boiling point: 98 °C Chronic 1
220 nm <0.05 A.U. Melting point: -91 °C H225, H315, H336, H304,
Flash point: -4 °C H400, H410
ADR/RID: 3, II P261, P301+P310, P331,
EINECS: 205-563-8 P273, P302+P352, P210
Assay (CG): >99%
Guaranteed analysis
Acidity <0.003 meq/g Magnesium (Mg) <1 ppm
Potassium (K) <1 ppm
Color <10 APHA Sodium (Na) <2 ppm
Total phosphorus (P) <1 ppm
Water <0.05% Total silicon (Si) <1 ppm
Total sulphur (S) <50 ppm
Residue after evaporation <20 ppm Zinc (Zn) <2 ppm
Substances darkened
Acidity <0.003 meq/g by H2SO4 <20 APHA
Calcium (Ca) <2 ppm 139
Copper (Cu) <1 ppm
Iron (Fe) <5 ppm
Lead (Pb) <1 ppm
H | Heptane fraction
Heptane fraction SLR 1-Heptane sulfonic acid sodium salt solution 0.1M Certified
specified reagents for general laboratory work- extra pure for Ion pair chromatography
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
250 mÒ Glass bottle 1024-4480 H/0166/07
500 mÒ Glass bottle 1011-2050 H/0100/08 EINECS: 245-210-5
1Ò Glass bottle 1014-2492 H/0100/15
2.5 Ò Glass bottle 1006-0160 H/0100/17 Absorbance specification
200 Ò Metal drum 1149-8323 H/0100/27 Max. Absorbance (1cm cell v HPLC water)
254 nm (sol. aqu. 0.005 M) : <0.02 A.U.
C7H16 UN: 1206
CAS: 142-82-5 GHS: Flam. Liq. 2, Skin Irrit. Lot analysis on the label.
MW: 100.21 2, STOT SE 3, Asp. Tox. 1,
Density at 20°C: 0.683 Aquatic Acute 1, Aquatic Heptan-1-ol
Boiling point: 98 °C Chronic 1
Melting point: -91 °C H225, H315, H336, H304, pure
Flash point: -4 °C H400, H410
ADR/RID: 3, II P261, P301+P310, P331, packaging
EINECS: 205-563-8 P273, P302+P352, P210 100 mÒ Glass bottle
C7H16O Cat. No Mfr. No
CAS: 111-70-6 H/0250/05
MW: 116.21 1074-5331
Density at 20°C: 0.822
Boiling point: 176 °C EINECS: 203-897-9
Melting point: -35 °C UN: 2810
Flash point: 73 °C GHS: Acute Tox. 4, Eye Irrit. 2
ADR/RID: 6.1/III H312, H319, H332
P302+P352, P301+P312,
Assay (CG): >98% P304+P340, P280,
P305+P351+P338
1-Heptane sulfonic acid sodium salt Certified
Mfr. No
for Ion pair chromatography for electrochemical detection
H/0169/46
packaging Cat. No Hexachloroplatinic(IV) acid hydrate SLR
: <0.02 A.U.
25 g Plastic jar 1002-0170 : <0.02 A.U. specified reagents for general laboratory work- extra pure Mfr. No
: <0.02 A.U. H/0262/43
C7H15NaO3S GHS: Skin Irrit. 2, Eye Irrit. 2, packaging Cat. No H/0262/44
CAS: 22767-50-6 STOT SE 3
MW: 202.27 H315, H335, H319 1 g Vial 1018-1420
Melting point: >300 °C P261, P302+P352, P280, 5 g Vial 1063-5492
EINECS: 245-210-5 P305+P351+P338
H2Cl6Pt.6H2O Corr. 1B, Eye Dam. 1, Resp.
Assay: >98% CAS: 26023-84-7 Sens. 1, Skin Sens. 1
MW: 517.92 H314, H301, H334, H317
Guaranteed analysis Pass Melting point: 60 °C P301+P310,
Electrochemical test ADR/RID: 8, III P301+P330+P331,
EINECS: 241-010-7 P305+P351+P338, P310,
Absorbance specification 240 nm (sol. aqu. 0.25 M) UN: 2507 P261, P304+P341,
Max. Absorbance (1cm cell v HPLC water) 250 nm (sol. aqu. 0.25 M) GHS: Acute Tox. 3, Skin P342+P311, P280
260 nm (sol. aqu. 0.25 M)
200 nm (sol. aqu. 0.25 M) : <0.1 A.U. Assay: 39 to 41%
210 nm (sol. aqu. 0.25 M) : <0.05 A.U.
220 nm (sol. aqu. 0.25 M) : <0.03 A.U. The price charged for this item is subject to alteration and will be that ruling at time
of despatch.
Tested by HPLC-EC to show low electrochemical response.
Detector - ESA Coulochem II.
Mode-oxidative.
Electrode graphite.
Lot analysis on the label.
Hexadecane SLR
specified reagents for general laboratory work- extra pure
packaging Cat. No Mfr. No
100 mÒ Glass bottle H/0270/05
1020-4580
1-Heptane sulfonic acid sodium salt Certified C16H34
CAS: 544-76-3 Flash point: 135 °C
for Ion pair chromatography Mfr. No MW: 226.45 EINECS: 208-878-9
H/0168/46 Density at 20°C: 0.773 GHS: Asp. Tox. 1
H/0168/48 Boiling point: 287 °C H304, EUH066
H/0168/65 Melting point: 18 °C P301+P310, P331, P280
packaging Cat. No : <0.02 A.U. Assay (CG): >98%
: <0.02 A.U.
25 g Plastic jar 1031-5850 : <0.02 A.U.
100 g Plastic jar 1060-5302
5 kg Plastic keg 1148-3743
C7H15NaO3S GHS: Skin Irrit. 2, Eye Irrit. 2,
CAS: 22767-50-6 STOT SE 3
MW: 202.25 H315, H335, H319
Melting point: >300 °C P261, P302+P352, P280,
EINECS: 245-210-5 P305+P351+P338
Assay: >98%
Absorbance specification
Max. Absorbance (1cm cell v HPLC water)
200 nm (sol. aqu. 0.25 M) : <0.1 A.U. 240 nm (sol. aqu. 0.25 M)
210 nm (sol. aqu. 0.25 M) : <0.05 A.U. 250 nm (sol. aqu. 0.25 M)
220 nm (sol. aqu. 0.25 M) : <0.03 A.U. 260 nm (sol. aqu. 0.25 M)
Lot analysis on the label.
140
n-Hexane | H
1.1,1.3,3.3-Hexafluoropropan-2-ol Guaranteed analysis <50 ppm n-Butyl formate <0.01%
<5 ppm Total phosphorus (P) <100 ppm
for gas chromatography Calcium (Ca) Total silicon (Si)
Copper (Cu) <10 ppm Total sulphur (S) <20 ppm
packaging Cat. No Mfr. No Iron (Fe) <5 ppm Zinc (Zn) <200 ppm
H/0285/04 Lead (Pb)
25 mÒ Glass bottle 1016-1520 Magnesium (Mg) <20 ppm <20 ppm
Sodium (Na) <100 ppm
C3H2F6O EINECS: 213-059-4
CAS: 920-66-1 UN: 3265
MW: 168.04 GHS: Acute Tox. 4, Skin
Density at 20°C: 1.596 Corr. 1B, Eye Dam. 1
Boiling point: 59 °C H302, H314, H332
Melting point: -4 °C P280, P260, P264,
Flash point: >100 °C P301+P330+P331,
ADR/RID: 8, II P305+P351+P338, P310
Assay (CG): >99% n-Hexane Certified AR
Hexafluorosilicic acid for analysis Cat. No Mfr. No
See Fluorosilicic acid 35%, page 130 packaging 1036-6230 H/0421/PB08
1071-5911 H/0421/PB17
500 mÒ Coated Glass bottle 1032-8203
2.5 Ò Coated Glass bottle 1202-5470 H/0421/25
25 Ò Metal drum H/0421/27
200 Ò Metal drum UN: 1208
Hexamethylenediamine See 1, page 103 GHS: Flam. Liq. 2, Repr. 2,
C6H14 Skin Irrit. 2, STOT SE 3,
Hexamine CAS: 110-54-3 STOT RE 2, Asp. Tox. 1,
MW: 86.18 Aquatic Chronic 2
for analysis Density at 20°C: 0.659 H225, H304, H336, H315,
Boiling point: 69 °C H373, H411, H361f
packaging Melting point: -95 °C P281, P260, P301+P310,
500 g Plastic jar Flash point: -22 °C P331, P273, P302+P352, P210
1 kg Plastic jar ADR/RID: 3, II
5 kg Plastic keg EINECS: 203-777-6
C6H12N4 Certified AR
CAS: 100-97-0
MW: 140.19 Cat. No Mfr. No Assay (CG): >99%
Density at 20°C: 1.33 H/0320/53
Melting point: 280 °C 1075-5331 H/0320/60 Guaranteed analysis
Flash point: 250 °C 1031-5900 H/0320/65
1064-5682 Acidity / Alkalinity <0.00008 meq/g Lead (Pb) <0.02 ppm
Assay: >99.5% <20 ppm Magnesium (Mg) <0.05 ppm
ADR/RID: 4.1, III <0.002% Color <10 APHA Potassium (K)
Guaranteed analysis EINECS: 202-905-8 <20 ppm Sodium (Na) <0.1 ppm
pH (10% aq. soln.) UN: 1328 <10 ppm Water <0.02% Total phosphorus (P) <0.1 ppm
Ammonium (NH4) GHS: Flam. Sol. 2, Skin Sens. 1 <50 ppm Total silicon (Si) <0.1 ppm
Calcium (Ca) H228, H317 Residue after evaporation <20 ppm Total sulphur (S) <0.05 ppm
Copper (Cu) P280, P210, P233 <5 ppm Zinc (Zn) <10 ppm
Iron (Fe) Substances darkened Aromatic Hydrocarbons <0.1 ppm
Lead (Pb) <1 ppm
Magnesium (Mg) <1 ppm by (H2SO4) Pass Manganese (Mn) <0.01%
<1 ppm Bromine number <0.5 Molybdenum (Mo)
Typical analysis <1 ppm Nickel (Ni) <0.02 ppm
Aluminium (Al) <1 ppm Calcium (Ca) <0.2 ppm Strontium (Sr) <0.02 ppm
Arsenic (As) Titanium (Ti) <0.02 ppm
Barium (Ba) Copper (Cu) <0.02 ppm Vanadium (V) <0.02 ppm
Cadmium (Cd) <0.02 ppm
Chromium (Cr) Iron (Fe) <0.1 ppm <0.02 ppm
Cobalt (Co)
: 8.5 to 9.5 Sodium (Na) Typical analysis <0.1 ppm
Lot analysis on the label. <0.005% Total chloride (Cl) <0.02 ppm
<10 ppm Total phosphorus (P) Aluminium (Al) <0.02 ppm
<1 ppm Total silicon (Si) Barium (Ba) <0.02 ppm
<2 ppm Total sulphur (S) Cadmium (Cd) <0.02 ppm
<1 ppm Zinc (Zn) Chromium (Cr) <0.02 ppm
<5 ppm Cobalt (Co)
Lithium (Li)
<1 ppm Lithium (Li) Lot analysis on the label.
<1 ppm Manganese (Mn)
<1 ppm Nickel (Ni)
<1 ppm Titanium (Ti)
<1 ppm Vanadium (V)
<1 ppm
Hexamine SLR
specified reagents for general laboratory work- extra pure Mfr. No
H/0300/53
packaging Cat. No H/0300/60
H/0300/65
500 g Plastic jar 1036-5990 H/0300/70
1 kg Plastic jar 1030-5900
5 kg Plastic keg 1010-1430
25 kg Fibre Keg 1199-6571
C6H12N4 ADR/RID: 4.1, III
CAS: 100-97-0 EINECS: 202-905-8
MW: 140.19 UN: 1328
Density at 20°C: 1.33 GHS: Flam. Sol. 2, Skin Sens. 1
Melting point: 280 °C H228, H317
Flash point: 250 °C P280, P210, P233
Assay: >99%
141
H | n-Hexane
n-Hexane SLR Hexanes (95% n-Hexane approx.) Certified
specified reagents for general laboratory work- extra pure HPLC for fluorescence detection Mfr. No
H/0409/PB15
packaging Cat. No Mfr. No packaging Cat. No H/0409/PB17
500 mÒ Coated Glass bottle 1142-2644 H/0420/PB08 1 Ò Coated Glass bottle 1064-7602
2.5 Ò Coated Glass bottle 1075-6481 H/0420/PB17 2.5 Ò Coated Glass bottle 1040-9370
5Ò Fluorinated HDPE Plastic bottle 1066-6832
25 Ò Metal drum 1051-9960 H/0420/21 C6H14 GHS: Flam. Liq. 2, Repr. 2,
H/0420/25 CAS: 92112-69-1 Skin Irrit. 2, STOT SE 3,
MW: 86.18 STOT RE 2, Asp. Tox. 1,
C6H14 UN: 1208 Density at 20°C: 0.659 Aquatic Chronic 2
CAS: 110-54-3 GHS: Flam. Liq. 2, Repr. 2, Boiling point: 69 °C H225, H304, H411, H315,
MW: 86.18 Skin Irrit. 2, STOT SE 3, Melting point: -95 °C H373, H336, H361f
Density at 20°C: 0.659 STOT RE 2, Asp. Tox. 1, Flash point: -22 °C P280, P281, P302+P352,
Boiling point: 69 °C Aquatic Chronic 2 ADR/RID: 3, II P261, P260, P301+P310,
Melting point: -95 °C H225, H304, H336, H315, EINECS: 295-570-2 P331, P273, P210, P240
Flash point: -22 °C H373, H411, H361f UN: 1208
ADR/RID: 3, II P281, P260, P301+P310,
EINECS: 203-777-6 P331, P273, P302+P352, P210
Assay (CG): >95%
Assay (CG): >99% Guaranteed analysis <0.00015 meq/g Residue after evaporation <2 ppm
<0.01%
Guaranteed analysis Acidity / Alkalinity
Water
Acidity / Alkalinity <0.0002 meq/g Lead (Pb) <1 ppm Absorbance specification
Magnesium (Mg) <1 ppm Max. Absorbance (1cm cell v HPLC water)
Color <20 APHA Potassium (K) <1 ppm
Sodium (Na) <2 ppm
Water <0.05% Total phosphorus (P) <1 ppm 200 nm <0.3 A.U. 240 nm <0.005 A.U.
Total silicon (Si) <1 ppm 210 nm <0.1 A.U. 250 nm <0.005 A.U.
Residue after evaporation <50 ppm Total sulphur (S) <50 ppm 220 nm <0.025 A.U. Fluorescence
Zinc (Zn) <2 ppm 230 nm <0.01 A.U. Pass
Bromine number <0.5
Certified
Calcium (Ca) <2 ppm
Copper (Cu) <1 ppm Fluorescence
Excitation in the range 250-750nm produces no fluorescence emission greater than
Iron (Fe) <5 ppm the solvents natural Raman signal at 350nm excittation.This is equivalent to the
emission maximum of approximately 1ppb quinine sulfate.
Hexanes (95% n-Hexane approx.) Lot analysis on the label ( excluding fluorescence scan).
Filtered to 0.2 µm.
for HPLC
packaging Cat. No Mfr. No
1 Ò Glass bottle 1049-9170 H/0406/15
2.5 Ò Glass bottle 1070-3611 H/0406/17
2.5 Ò Coated Glass bottle 1010-1910 H/0406/PB17
5 Ò Aluminium can 1023-4150 H/0406/21
10 Ò Returnable Drum 1266-6717 H/0406/10RSS
25 Ò Returnable Drum 1267-6717 H/0406/25RSS
30 Ò Returnable Drum 1268-6717 H/0406/30RSS
C6H14 GHS: Flam. Liq. 2, Repr. 2, Hexanes (95% n-Hexane approx. ) Distol
CAS: 110-54-3 Skin Irrit. 2, STOT SE 3,
MW: 86.18 STOT RE 2, Asp. Tox. 1, for residue and pesticide analysis Mfr. No
Density at 20°C: 0.659 Aquatic Chronic 2 H/0403/15
Boiling point: 69 °C H225, H304, H411, H315, packaging Cat. No H/0403/17
Melting point: -95 °C H373, H336, H361f
Flash point: -22 °C P280, P281, P302+P352, 1 Ò Glass bottle 1062-7412
ADR/RID: 3, II P261, P260, P301+P310, 2.5 Ò Glass bottle 1001-0180
EINECS: 295-570-2 P331, P273, P210, P240
UN: 1208 C6H14 GHS: Flam. Liq. 2, Repr. 2,
CAS: 92112-69-1 Skin Irrit. 2, STOT SE 3,
Guaranteed analysis MW: 86.18 STOT RE 2, Asp. Tox. 1,
Density at 20°C: 0.659 Aquatic Chronic 2
Acidity / Alkalinity <0.00015 meq/g Residue after evaporation <2 ppm Boiling point: 69 °C H225, H304, H411, H315,
Water <0.01% Melting point: -95 °C H373, H336, H361f
230 nm <0.01 A.U. Flash point: -22 °C P280, P281, P302+P352,
Absorbance specification 240 nm <0.005 A.U. ADR/RID: 3, II P261, P260, P301+P310,
Max. Absorbance (1cm cell v HPLC water) 250 nm <0.005 A.U. EINECS: 295-570-2 P331, P273, P210, P240
UN: 1208
200 nm <0.2 A.U. Guaranteed analysis
210 nm <0.05 A.U.
220 nm <0.02 A.U. Water
Residue after evaporation
Lot analysis on the label. GC (ECD) Analysis <0.01% GC (FID) Analysis Pass
Filtered to 0.2 µm. <2 ppm GC (NPD) analysis Pass
Pass
See page 308 for more information GC Analysis
Analysis of pesticides: from the retention time of Lindane, after concentration of
2500 times, no impurity peak higher than that obtained with 10 pg / mÒ héptachlo-
réoxyde (ECD) and 5 pg / mÒ Parathion (NPD).
Analysis of hydrocarbons: no impurity chain longer than the dodecane is present at
a concentration greater than 0.01 ppm (FID).
Conditions :
Column: J&W DB 5: 30m x 0.32mm x 0.1µm df.
Temperature profile: (1) 50°C, 2 min
(2) 40°C / min until 320°C
(3) 320°C for 30 min
Injection: 5µÒ cold on the column.
142
Hexanedioic acid | H
Hexanes (95% n-Hexane approx.) Hexanes fraction SLR
extra dry, for synthesis specified reagents for general laboratory work- extra pure
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
H/0402/PB15
1 Ò Coated Glass bottle 1079-3601 H/0402/PB17 500 mÒ Glass bottle 1054-9380 H/0350/08
2.5 Ò Coated Glass bottle 1047-8980 H/0350/15
<2 ppm 1 Ò Glass bottle 1065-5682 H/0350/17
C6H14 GHS: Flam. Liq. 2, Repr. 2, H/0350/PB17
CAS: 92112-69-1 Skin Irrit. 2, STOT SE 3, 2.5 Ò Glass bottle 1073-5141 H/0350/21
MW: 86.18 STOT RE 2, Asp. Tox. 1, H/0350/FP21
Density at 20°C: 0.659 Aquatic Chronic 2 2.5 Ò Coated Glass bottle 1075-3124 H/0350/25
Boiling point: 69 °C H225, H304, H411, H315, H/0350/27
Melting point: -95 °C H373, H336, H361f 5 Ò Fluorinated HDPE Plastic bottle 1040-7070
Flash point: -22 °C P280, P281, P302+P352,
ADR/RID: 3, II P261, P260, P301+P310, 5 Ò Fluorinated HDPE square Drum 1036-9899
EINECS: 295-570-2 P331, P273, P210, P240
UN: 1208 25 Ò Metal drum 1005-0190
200 Ò Metal drum 1238-1453
Guaranteed analysis <0.005% Residue after evaporation C6H14 GHS: Flam. Liq. 2, Repr. 2,
Water CAS: 92112-69-1 Skin Irrit. 2, STOT SE 3,
MW: 86.18 STOT RE 2, Asp. Tox. 1,
Density at 20°C: 0.659 Aquatic Chronic 2
Boiling point: 69 °C H225, H304, H411, H315,
Melting point: -95 °C H373, H336, H361f
Flash point: -22 °C P280, P281, P302+P352,
ADR/RID: 3, II P261, P260, P301+P310,
EINECS: 295-570-2 P331, P273, P210, P240
UN: 1208
Hexanes (95% n-Hexane approx ) Certified AR Guaranteed analysis
Residue after evaporation
for analysis Mfr. No
H/0355/15
packaging Cat. No H/0355/17 <20 ppm
H/0355/21
1 Ò Glass bottle 1076-4371 H/0355/25
H/0355/27
2.5 Ò Glass bottle 1078-3601 Hexanes fraction SLR
5Ò Fluorinated HDPE Plastic bottle 1056-0531 <0.1 ppm Mfr. No
25 Ò Metal drum 1003-2463 <0.02 ppm extra pure, low in aromatic hydrocarbons H/0400/08
200 Ò Metal drum 1262-6717 <0.05 ppm H/0400/17
C6H14 GHS: Flam. Liq. 2, Repr. 2, <0.1 ppm packaging Cat. No <0.1%
CAS: 92112-69-1 Skin Irrit. 2, STOT SE 3, <0.1 ppm
MW: 86.18 STOT RE 2, Asp. Tox. 1, <0.1 ppm 500 mÒ Glass bottle 1029-4000
Density at 20°C: 0.659 Aquatic Chronic 2 <0.05 ppm 2.5 Ò Glass bottle 1031-6330
Boiling point: 69 °C H225, H304, H411, H315, <10 ppm
Melting point: -95 °C H373, H336, H361f <0.1 ppm C6H14 GHS: Flam. Liq. 2, Repr. 2,
Flash point: -22 °C P280, P281, P302+P352, CAS: 92112-69-1 Skin Irrit. 2, STOT SE 3,
ADR/RID: 3, II P261, P260, P301+P310, <0.1% MW: 86.18 STOT RE 2, Asp. Tox. 1,
EINECS: 295-570-2 P331, P273, P210, P240 Density at 20°C: 0.659 Aquatic Chronic 2
UN: 1208 <0.02 ppm Boiling point: 69 °C H225, H304, H411, H315,
<0.02 ppm Melting point: -95 °C H373, H336, H361f
<0.02 ppm Flash point: -22 °C P280, P281, P302+P352,
<0.02 ppm ADR/RID: 3, II P261, P260, P301+P310,
<0.02 ppm EINECS: 295-570-2 P331, P273, P210, P240
<0.02 ppm UN: 1208
Assay (CG): >95%
Guaranteed analysis
Acidity / Alkalinity <0.00008 meq/g Iron (Fe)
Lead (Pb)
Color <10 APHA Magnesium (Mg)
Potassium (K)
Water <0.02% Sodium (Na) Guaranteed analysis
Total phosphorus (P) Residue after evaporation
Residue after evaporation <20 ppm Total silicon (Si) <20 ppm Aromatic Hydrocarbons
Total sulphur (S)
Substances darkened Zinc (Zn)
Aromatic Hydrocarbons
by (H2SO4) Pass
Bromine number <0.5 Manganese (Mn)
Molybdenum (Mo)
Hexane Fractions : >98.5% Nickel (Ni)
Strontium (Sr)
Thiophene test : Pass Titanium (Ti) Hexanedioic acid See Adipic acid, page 26
Vanadium (V)
Calcium (Ca) <0.2 ppm
Copper (Cu) <0.02 ppm
Typical analysis <0.1 ppm
<0.02 ppm
Aluminium (Al) <0.02 ppm
Barium (Ba) <0.02 ppm
Cadmium (Cd) <0.02 ppm
Chromium (Cr) <0.02 ppm
Cobalt (Co)
Lithium (Li)
Lot analysis on the label.
Find out more on page 308
143
H | 1-Hexane sulfonic acid sodium salt
1-Hexane sulfonic acid sodium salt Certified Hexan-1-ol SLR
for Ion pair chromatography for electrochemical detection specified reagents for general laboratory work- extra pure
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
H/0439/46
25 g Plastic jar 1051-0151 500 mÒ Coated Glass bottle 1042-8600 H/0450/PB08
: <0.02 A.U. 2.5 Ò Coated Glass bottle 1076-6481 H/0450/PB17
C6H13NaO3S.xH2O GHS: Skin Irrit. 2, Eye Irrit. 2, : <0.02 A.U. 25 Ò Metal drum 1262-8635
CAS: 2832-45-3 STOT SE 3 : <0.02 A.U. 200 Ò Metal drum 1191-1874 H/0450/25
MW: 188.22 H335, H315, H319 H/0450/27
Melting point: >300 °C P261, P302+P352, P280, Certified C6H14O ADR/RID: 3, III
EINECS: 220-601-3 P305+P351+P338 Mfr. No CAS: 111-27-3 EINECS: 203-852-3
MW: 102.18 UN: 2282
Assay: >98% H/0438/46 Density at 20°C: 0.814 GHS: Acute Tox. 4
H/0438/48 Boiling point: 156 to 157 °C H302
Guaranteed analysis Pass Melting point: -52 °C P280, P301+P312, P210
Electrochemical test : <0.02 A.U. Flash point: 59 °C
: <0.02 A.U.
Absorbance specification : <0.02 A.U. Assay (CG): >99%
Max. Absorbance (1cm cell v HPLC water)
SLR
200 nm (sol. aqu. 0.25 M) : <0.1 A.U. 240 nm (sol. aqu. 0.25 M) Mfr. No
210 nm (sol. aqu. 0.25 M) : <0.05 A.U. 250 nm (sol. aqu. 0.25 M) H/0440/07
220 nm (sol. aqu. 0.25 M) : <0.03 A.U. 260 nm (sol. aqu. 0.25 M)
Tested by HPLC-EC to show low electrochemical response. Hex-1-ene SLR
Detector - ESA Coulochem II
Mode-oxidative specified reagents for general laboratory work- extra pure Mfr. No
Graphite Electrode. H/0460/05
Lot analysis on the label. packaging Cat. No
1-Hexane sulfonic acid sodium salt 100 mÒ Glass bottle 1037-6230
for Ion pair chromatography C6H12 EINECS: 209-753-1
CAS: 592-41-6 UN: 2370
packaging Cat. No MW: 84.16 GHS: Flam. Liq. 2, STOT SE
Density at 20°C: 0.678 3, Asp. Tox. 1, Aquatic Chronic 2
25 g Plastic jar 1066-6642 Boiling point: 62 to 65 °C H225, H304, H411, H336,
100 g Plastic jar 1035-6230 Melting point: -140 °C EUH066
Flash point: -26 °C P261, P301+P310, P331,
C6H13NaO3S.xH2O GHS: Skin Irrit. 2, Eye Irrit. 2, ADR/RID: 3, II P273, P210, P240
CAS: 2832-45-3 STOT SE 3
MW: 188.22 H335, H315, H319 Guaranteed analysis
Melting point: >300 °C P261, P302+P352, P280, Complies with standard IR spectrum: Pass
EINECS: 220-601-3 P305+P351+P338
Assay: >98%
Absorbance specification
Max. Absorbance (1cm cell v HPLC water)
200 nm (sol. aqu. 0.25 M) : <0.1 A.U. 240 nm (sol. aqu. 0.25 M) L-Histidine
210 nm (sol. aqu. 0.25 M) : <0.05 A.U. 250 nm (sol. aqu. 0.25 M)
220 nm (sol. aqu. 0.25 M) : <0.03 A.U. 260 nm (sol. aqu. 0.25 M) pure
Lot analysis on the label. packaging Cat. No Mfr. No
100 g Plastic jar
3 kg Plastic jar 1016-1760 H/0467/48
C6H9N3O2 1269-6717 H/0467/63
CAS: 71-00-1
n-Hexanoic acid MW: 155.16 Melting point: 282 °C
EINECS: 200-745-3
specified reagents for general laboratory work- extra pure Assay: >98%
packaging Cat. No
250 mÒ Glass bottle 1015-1760
C6H12O2 UN: 2829 Holmium standard metal solution 1000 ppm
CAS: 142-62-1 GHS: Acute Tox. 4, Skin
MW: 116.16 Corr. 1B, Eye Dam. 1 for ICP solution in HNO3 2%, NIST certified
Density at 20°C: 0.920 H314, H332, H302, H312
Boiling point: 202 to 203 °C P280, P301+P330+P331, packaging Cat. No Mfr. No
Melting point: -3 °C P305+P351+P338, P310, 100 mÒ Plastic bottle
Flash point: 104 °C P302+P352, P301+P312, 500 mÒ Plastic bottle 1196-9542 SPPLHO22Y
ADR/RID: 8, III P304+P340 1195-9542 SPPLHO22X
EINECS: 205-550-7 H315, H319
Guaranteed analysis
Complies with standard IR spectrum: Pass
Manufactured to a tolerance of ± 0.5%.
All standards are manufactured from acids, metals & metal salts and contain less
than <10 ppm total metal impurites.
See also the full range in the Standard Elemental solution for Trace metal analysis
section see page 314.
Check with your local distributor for availability of Spex product
A full list of our products can Hyamine® 1622
be found on page 323.
For microscopy, solution 0.004M
144
packaging Cat. No Mfr. No
2.5 Ò Glass bottle 1027-4000 H/0480/17
Guaranteed analysis
Factor : 0.97 to 1.03
Hydrazinium chloride | H
Hyamine solution 5 % w/v SLR Assay: >99% <20 APHA Sodium (Na) <500 ppm
Mfr. No <50 ppm n-Butyl formate <0.02%
specified reagents for general laboratory work- extra pure J/9016/15 Guaranteed analysis Total phosphorus (P)
<5 ppm Total silicon (Si) <100 ppm
packaging Cat. No SLR Color <10 ppm Total sulphur (S) <200 ppm
1 Ò Glass bottle 1287-7182 Calcium (Ca) Zinc (Zn) <200 ppm
Copper (Cu) <5 ppm
Iron (Fe) <20 ppm <20 ppm
Lead (Pb) <20 ppm
Hyamine solution 0.05 M Magnesium (Mg)
Potassium (K)
specified reagents for general laboratory work- extra pure
packaging Cat. No Mfr. No
2.5 Ò Glass bottle 1288-7182 J/9019/17
Hyamine solution 0.004 M SLR Hydrazine hydrate solution 60 % SLR
specified reagents for general laboratory work- extra pure Mfr. No specified reagents for general laboratory work- extra pure Mfr. No
J/9018/17 H/0500/PB08
packaging Cat. No packaging Cat. No
2.5 Ò Glass bottle 1260-6737
500 mÒ HDPE Plastic bottle 1014-1810
Hydrazine hydrate Cat. No Certified AR
N2H4.H2O Skin Sens. 1, Aquatic Acute
for analysis 1148-2644 Mfr. No CAS: 7803-57-8 1, Aquatic Chronic 1
1052-0151 H/0560/PB05 MW: 50.06 H311, H350, H301, H314,
packaging H/0560/PB08 Boiling point: 118 °C H331, H317, H410
Skin Sens. 1, Aquatic Acute Melting point: -51.7 °C P301+P310, P280, P312,
100 mÒ Coated Glass bottle 1, Aquatic Chronic 1 Flash point: 75 °C P302+P350,
500 mÒ HDPE Plastic bottle H311, H350, H301, H314, ADR/RID: 8, 6.1, II P301+P330+P331,
H331, H317, H410 UN: 2030 P305+P351+P338, P310,
N2H4.H2O P301+P310, P280, P312, GHS: Carc. 1B, Acute Tox. 3, P201, P308+P313,
CAS: 7803-57-8 P302+P350, Skin Corr. 1B, Eye Dam. 1, P304+P340, P273
MW: 50.06 P301+P330+P331,
Boiling point: 118 °C P305+P351+P338, P310, Assay: 58 to 64% <0.03%
Melting point: -51.7 °C P201, P308+P313,
Flash point: 75 °C P304+P340, P273 Guaranteed analysis
ADR/RID: 8, 6.1, II n-Butyl formate
UN: 2030
GHS: Carc. 1B, Acute Tox. 3,
Skin Corr. 1B, Eye Dam. 1,
Assay: >99% Hydrazinium chloride SLR
Guaranteed analysis specified reagents for general laboratory work- extra pure Mfr. No
H/0600/50
Color <10 APHA Sodium (Na) <100 ppm packaging Cat. No
Calcium (Ca) <10 ppm Total chloride (Cl) <0.005% 250 g Plastic jar
Copper (Cu) Total phosphorus (P) <20 ppm 1053-0151
Iron (Fe) <1 ppm Total silicon (Si) <50 ppm NH2NH2.2HCl
Lead (Pb) <2 ppm Total sulphur (S) <50 ppm CAS: 5341-61-7 GHS: Carc. 1B, Acute Tox. 3,
Magnesium (Mg) <1 ppm Zinc (Zn) <5 ppm MW: 104.97 Skin Sens. 1, Aquatic Acute
Potassium (K) <5 ppm Density at 20°C: 1.42 1, Aquatic Chronic 1
<5 ppm <1 ppm Boiling point: 200 °C H311, H331, H350, H410,
Typical analysis <1 ppm Melting point: 198 °C H301, H317
<1 ppm Manganese (Mn) <1 ppm ADR/RID: 6.1, III P301+P310, P280,
Aluminium (Al) <1 ppm Molybdenum (Mo) <1 ppm EINECS: 226-283-2 P302+P350, P201,
Barium (Ba) <1 ppm Nickel (Ni) <1 ppm UN: 2811 P308+P313, P304+P340, P273
Cadmium (Cd) <1 ppm Selenium (Se) <1 ppm
Chromium (Cr) <1 ppm Strontium (Sr) <1 ppm Assay: >98%
Cobalt (Co) <1 ppm Titanium (Ti)
Tin (Sn) <1 ppm Vanadium (V)
Lithium (Li)
Hydrazine hydrate SLR
specified reagents for general laboratory work- extra pure
packaging Cat. No Mfr. No
250 mÒ Coated Glass bottle 1060-7032 H/0550/PB07
2.5 Ò HDPE Plastic bottle 1043-8600 H/0550/PB17
N2H4.H2O Skin Sens. 1, Aquatic Acute
CAS: 7803-57-8 1, Aquatic Chronic 1
MW: 50.06 H311, H350, H301, H314,
Boiling point: 118 °C H331, H317, H410
Melting point: -51.7 °C P301+P310, P280, P312,
Flash point: 75 °C P302+P350,
ADR/RID: 8, 6.1, II P301+P330+P331,
UN: 2030 P305+P351+P338, P310,
GHS: Carc. 1B, Acute Tox. 3, P201, P308+P313,
Skin Corr. 1B, Eye Dam. 1, P304+P340, P273
145
H | Hydrazinium sulfate
Hydrazinium sulfate Certified AR Hydriodic acid 54-56% SLR
for analysis extra pure, 1.7 specific gravity Mfr. No
H/0750/05
packaging Cat. No Mfr. No packaging Cat. No
H/0700/48 <2 ppm
100 g Plastic jar 1034-6280 H/0700/50 100 mÒ Glass bottle 1149-2644 <50 ppm
250 g Plastic jar 1011-1860 <50 ppm
<10 ppm HI UN: 1787 <100 ppm
H4N2.H2SO4 Skin Sens. 1, Aquatic Acute <20 ppm CAS: 10034-85-2 GHS: Skin Corr. 1A, Eye <200 ppm
CAS: 10034-93-2 1, Aquatic Chronic 1 <0.002% MW: 127.91 Dam. 1, STOT SE 3 <10 ppm
MW: 130.12 H350, H331, H311, H301, <20 ppm Density at 20°C: 1.7 H335, H314
Melting point: 254 °C H317, H410 Boiling point: 127 °C P264, P280,
ADR/RID: 6.1, III P280, P301+P310, <5 ppm Melting point: -51 °C P301+P330+P331,
EINECS: 233-110-4 P302+P352, P304+P340, ADR/RID: 8, II P305+P351+P338, P310, P260
UN: 3288 P308+P313, P273 EINECS: 233-109-9
GHS: Carc. 1B, Acute Tox. 3,
Assay: 54 to 56%
Assay: >99% <10 ppm Potassium (K) <50 ppm Nickel (Ni)
<5 ppm Sodium (Na) Guaranteed analysis <0.1% Potassium (K)
Guaranteed analysis Total chloride (Cl) Sodium (Na)
<10 ppm Total silicon (Si) Calcium (Ca) <2 ppm Total silicon (Si)
Calcium (Ca) <5 ppm Zinc (Zn) Chloride and Bromide <5 ppm Total sulphur (S)
Copper (Cu) <5 ppm Chromium (Cr) <10 ppm Zinc (Zn)
Iron (Fe) Copper (Cu) <5 ppm
Lead (Pb) Iron (Fe) <20 ppm
Magnesium (Mg) Lead (Pb)
Magnesium (Mg)
Typical analysis
<1 ppm Cobalt (Co) <1 ppm
Manganese (Mn) <1 ppm Lithium (Li) <1 ppm
Aluminium (Al) <1 ppm Nickel (Ni) <1 ppm
Barium (Ba) <1 ppm Titanium (Ti) <1 ppm
Cadmium (Cd) <1 ppm Vanadium (V) <1 ppm
Chromium (Cr)
Lot analysis on the label.
Hydrazinium sulfate SLR
specified reagents for general laboratory work- extra pure Mfr. No
H/0650/53
packaging Cat. No H/0650/70 Hydrobromic acid 44-49% Optima
500 g Plastic jar 1043-8790 for ultra trace elemental analysis
25 kg Plastic keg 1146-8333
packaging Cat. No Mfr. No
H4N2.H2SO4 Skin Sens. 1, Aquatic Acute A471-500
CAS: 10034-93-2 1, Aquatic Chronic 1 500 mÒ Pre-cleaned Teflon FEP bottle 1197-4101
MW: 130.12 H350, H331, H311, H301,
Melting point: 254 °C H317, H410 HBr UN: 1788
ADR/RID: 6.1, III P280, P301+P310, CAS: 10035-10-6 GHS: Skin Corr. 1B, Eye
EINECS: 233-110-4 P302+P352, P304+P340, MW: 80.92 Dam. 1, STOT SE 3
UN: 3288 P308+P313, P273 Density at 20°C: 1.48 H314, H335
GHS: Carc. 1B, Acute Tox. 3, Boiling point: 128 °C P301+P330+P331, P280,
Melting point: -11 °C P305+P351+P338, P261,
ADR/RID: 8, II P304+P340
EINECS: 233-113-0
Assay: >99% Assay: 44-49%
Guaranteed analysis <50 ppm Potassium (K) <20 ppm Guaranteed analysis <10 ppt Molybdenum (Mo) <100 ppt
<20 ppm Sodium (Na) <100 ppm <100 ppt Neodymium (Nd) <10 ppt
Calcium (Ca) <50 ppm n-Butyl formate Zirconium (Zr) Nickel (Ni)
Copper (Cu) <20 ppm Total silicon (Si) <0.01% Gallium (Ga) <10 ppt Niobium (Nb) <100 ppt
Iron (Fe) <20 ppm Zinc (Zn) <100 ppm Terbium (Tb) <10 ppt Palladium (Pd) <10 ppt
Lead (Pb) Indium (In) <10 ppt Potassium (K)
Magnesium (Mg) <20 ppm Dysprosium (Dy) <100 ppt Praseodymium (Pr) <100 ppt
Aluminium (Al) <100 ppt Rhenium (Re) <100 ppt
Hydriodic acid 64-68% Certified AR Barium (Ba) <100 ppt Rhodium (Rh)
Beryllium (Be) <100 ppt Ruthenium (Ru) <10 ppt
for analysis Mfr. No Bismuth (Bi) <100 ppt Samarium (Sm) <100 ppt
H/0850/07 Cadmium (Cd) <100 ppt Scandium (Sc) <100 ppt
packaging Cat. No Calcium (Ca) <10 ppt Propan--1-ol <100 ppt
<0.5 ppm Cerium (Ce) <10 ppt Sodium (Na)
250 mÒ Glass bottle 1044-8790 <10 ppm Cesium (Cs) <100 ppt Strontium (Sr) <10 ppt
<10 ppm Chromium (Cr) <100 ppt Tellurium (Te) <100 ppt
HI UN: 1787 <20 ppm Cobalt (Co) <100 ppt Thallium (Tl) <100 ppt
CAS: 10034-85-2 GHS: Skin Corr. 1A, Eye <50 ppm Copper (Cu) <10 ppt Thorium (Th) <100 ppt
MW: 127.91 Dam. 1, STOT SE 3 Erbium (Er) <10 ppt Thulium (Tm) <100 ppt
Density at 20°C: 1.7 H335, H314 <2 ppm Europium (Eu) <10 ppt Tin (Sn)
Boiling point: 127 °C P264, P280, Gadolinium (Gd) <100 ppt Titanium (Ti) <10 ppt
Melting point: -51 °C P301+P330+P331, Gold (Au) <10 ppt Uranium (U) <10 ppt
ADR/RID: 8, II P305+P351+P338, P310, P260 Hafnium (Hf) <10 ppt Vanadium (V)
EINECS: 233-109-9 Holmium (Ho) <100 ppt Ytterbium (Yb) <1 ppt
<10 ppm Nickel (Ni) Iron (Fe) <10 ppt Yttrium (Y) <10 ppt
Assay: 64 to 68% <0.02% Potassium (K) Lanthanum (La) Zinc (Zn) <100 ppt
Sodium (Na) Lead (Pb) <1 ppt Platinum (Pt) <100 ppt
Guaranteed analysis <0.5 ppm Total silicon (Si) Lithium (Li) <100 ppt Rubidium (Rb)
<1 ppm Total sulphur (S) Lutetium (Lu) Tungsten (W) <1 ppt
Calcium (Ca) <5 ppm Zinc (Zn) Magnesium (Mg) <10 ppt <100 ppt
Chloride and Bromide <1 ppm Manganese (Mn) <100 ppt
Chromium (Cr) <5 ppm <100 ppt <10 ppt
Copper (Cu) <10 ppt
Iron (Fe) <100 ppt
Lead (Pb) <100 ppt
Magnesium (Mg) <100 ppt
<100 ppt
Lot analysis on the label.
Bottled in class 10 cleanroom conditions.Individually double-bagged in class 100
cleanroom conditions. Each bottle is individually packaged.
Certificate of analysis delivered with each bottle.
146
Hydrochloric acid 34-37% | H
Hydrobromic acid 48% Certified AR Calcium (Ca) <10 ppt Niobium (Nb) <1 ppt
Cerium (Ce) <10 ppt Potassium (K) <10 ppt
for analysis Mfr. No Cesium (Cs) <10 ppt Praseodymium (Pr)
H/0950/PB08 Chromium (Cr) <10 ppt Rhenium (Re) <1 ppt
packaging Cat. No H/0950/PB17 Cobalt (Co) <10 ppt Rhodium (Rh) <10 ppt
Copper (Cu) <10 ppt Ruthenium (Ru) <10 ppt
500 mÒ HDPE Plastic bottle 1055-0531 <0.5 ppm Erbium (Er) Samarium (Sm) <10 ppt
2.5 Ò HDPE Plastic bottle 1075-6291 <10 ppm Europium (Eu) <1 ppt Scandium (Sc)
Gadolinium (Gd) <1 ppt Propan--1-ol <1 ppt
HBr UN: 1788 <0.05% Gold (Au) <1 ppt Sodium (Na) <10 ppt
CAS: 10035-10-6 GHS: Skin Corr. 1B, Eye <2 ppm Hafnium (Hf) <20 ppt Strontium (Sr) <10 ppt
MW: 80.92 Dam. 1, STOT SE 3 <5 ppm Holmium (Ho) <10 ppt Tellurium (Te) <10 ppt
Density at 20°C: 1.48 H314, H335 <20 ppm Iron (Fe) <1 ppt Thallium (Tl) <10 ppt
Boiling point: 126 to 128 °C P301+P330+P331, P280, <0.5 ppm Lanthanum (La) <10 ppt Thorium (Th)
Melting point: -11 °C P305+P351+P338, P261, Lead (Pb) <1 ppt Thulium (Tm) <1 ppt
ADR/RID: 8, II P304+P340 Lithium (Li) <10 ppt Tin (Sn) <10 ppt
EINECS: 233-113-0 Lutetium (Lu) <10 ppt Titanium (Ti)
<2 ppm Potassium (K) Magnesium (Mg) <10 ppt Uranium (U) <1 ppt
Assay: 47 to 49% <0.5 ppm Sodium (Na) Manganese (Mn) <10 ppt Vanadium (V) <1 ppt
<0.1 ppm n-Butyl formate Mercury (Hg) <10 ppt Ytterbium (Yb) <20 ppt
Guaranteed analysis <0.0002% Total phosphorus (P) Molybdenum (Mo) <50 ppt Yttrium (Y) <10 ppt
<0.5 ppm Total silicon (Si) Neodymium (Nd) <10 ppt Zinc (Zn) <1 ppt
Calcium (Ca) <0.1 ppm Total sulphur (S) Nickel (Ni) <1 ppt Rubidium (Rb) <10 ppt
Chromium (Cr) <0.5 ppm Zinc (Zn) <20 ppt <1 ppt
Copper (Cu) <0.5 ppm <1 ppt
Iodide (I) <10 ppt
Iron (Fe) <10 ppt
Lead (Pb)
Magnesium (Mg) Bottled in class 10 cleanroom conditions.Individually double-bagged in class 100
Nickel (Ni) cleanroom conditions. Each bottle is individually packaged.
Certificate of analysis delivered with each bottle.
Hydrobromic acid 48% SLR Hydrochloric acid 34-37% Trace Metal
specified reagents for general laboratory work- extra pure Mfr. No for trace metal analysis Mfr. No
H/0900/PB08 A508-P500
packaging Cat. No H/0900/PB17 packaging Cat. No
A508-P1
500 mÒ HDPE Plastic bottle 1012-1860 H/0950/25 500 mÒ HDPE plastic bottle 1136-5830 A508-P212
2.5 Ò HDPE Plastic bottle 1055-0341 H/0900/27 1 Ò HDPE plastic bottle 1132-5870
25 Ò HDPE Plastic container 1260-6727 2.5 Ò HDPE plastic bottle 1135-5890 <0.1 ppb
200 Ò HDPE Plastic container 1197-1884 <10 ppm <0.5 ppb
<50 ppm HCl ADR/RID: 8, II <0.1 ppb
HBr UN: 1788 CAS: 7647-01-0 EINECS: 231-595-7 <0.5 ppb
CAS: 10034-85-2 GHS: Skin Corr. 1B, Eye <0.2% MW: 36.46 UN: 1789 <0.5 ppb
MW: 80.92 Dam. 1, STOT SE 3 <20 ppm Density at 20°C: 1.18 GHS: Skin Corr. 1B, STOT SE 3
Density at 20°C: 1.48 H314, H335 <20 ppm Boiling point: 57 °C H335, H314 <1 ppb
Boiling point: 126 to 128 °C P301+P330+P331, P280, <100 ppm Melting point: -35 °C P305+P351+P338, P310, P280 <0.1 ppb
Melting point: -11 °C P305+P351+P338, P261, <0.1 ppb
ADR/RID: 8, II P304+P340 <5 ppm <0.1 ppb
EINECS: 233-113-0 <0.1 ppb
Optima Assay: 34-37% <0.1 ppb
Assay: 47 to 49% <0.1 ppb
<20 ppm Potassium (K) Mfr. No Guaranteed analysis <10 APHA Neodymium (Nd) <0.1 ppb
Guaranteed analysis <2 ppm Sodium (Na) A466-250 <1 ppb Nickel (Ni)
<2 ppm n-Butyl formate A466-500 Color Niobium (Nb) <1 ppb
Calcium (Ca) Total phosphorus (P) Aluminium (Al) <0.5 ppb Palladium (Pd) <1 ppb
Chromium (Cr) <0.001% Total silicon (Si) A466-1 Antimony (Sb) <0.5 ppb Platinum (Pt) <1 ppb
Copper (Cu) <5 ppm Total sulphur (S) Arsenic (As) <0.1 ppb Potassium (K) <0.1 ppb
Iodide (I) <2 ppm Zinc (Zn) <50 ppt Barium (Ba) <0.1 ppb Praseodymium (Pr) <1 ppb
Iron (Fe) <10 ppt Beryllium (Be) <0.1 ppb Rhenium (Re) <0.1 ppb
Lead (Pb) <10 ppm <10 ppt Bismuth (Bi) Rhodium (Rh) <0.1 ppb
Magnesium (Mg) <2 ppm <10 ppt Boron (B) <1 ppb Rubidium (Rb) <0.1 ppb
Nickel (Ni) <100 ppt Bromide (Br) <10 ppm Ruthenium (Ru) <0.1 ppb
<10 ppt Cadmium (Cd) <0.1 ppb Samarium (Sm) <0.1 ppb
Hydrochloric acid 32-35% Calcium (Ca) Scandium (Sc) <0.5 ppb
Cerium (Ce) <1 ppb Selenium (Se) <0.5 ppb
for ultra trace elemental analysis Cesium (Cs) <0.1 ppb Silver (Ag) <0.01 ppm
Free Chlorine (Cl2) <0.1 ppb Sodium (Na) <0.3 ppm
packaging Cat. No Chromium (Cr) <0.5 ppm Strontium (Sr) <0.1 ppb
Cobalt (Co) <0.5 ppb Tantalum (Ta) <0.1 ppb
250 mÒ Teflon PFA bottle 1197-4081 Copper (Cu) <0.1 ppb Tellurium (Te) <0.5 ppb
Dysprosium (Dy) <0.5 ppb Terbium (Tb) <0.1 ppb
500 mÒ Pre-cleaned Teflon PFA bottle 1198-4081 Erbium (Er) <0.1 ppb Thallium (Tl) <0.1 ppb
Europium (Eu) <0.1 ppb Thorium (Th) <1 ppb
1 Ò Pre-cleaned Teflon PFA bottle 1195-4081 Gadolinium (Gd) <0.1 ppb Thulium (Tm) <0.1 ppb
Gallium (Ga) <0.1 ppb Tin (Sn)
HCl ADR/RID: 8, II Gold (Au) <0.1 ppb Titanium (Ti)
CAS: 7647-01-0 EINECS: 231-595-7 Hafnium (Hf) <0.5 ppb Total phosphorus (P)
MW: 36.46 g/mol UN: 1789 Holmium (Ho) <0.1 ppb Total sulphur (S)
Density at 20°C: 1.18 GHS: Skin Corr. 1B, STOT SE 3 Indium (In) <0.1 ppb Tungsten (W)
Boiling point: 57 °C H335, H314 Iron (Fe) <0.1 ppb Uranium (U)
Melting point: -35 °C P305+P351+P338, P310, P280 Lanthanum (La) Vanadium (V)
Lead (Pb) <1 ppb Ytterbium (Yb)
Assay: 32-35% <10 ppt Arsenic (As) Lithium (Li) <0.1 ppb Yttrium (Y)
<10 ppt Barium (Ba) Lutetium (Lu) <0.1 ppb Zinc (Zn)
Guaranteed analysis Beryllium (Be) Magnesium (Mg) <0.1 ppb Zirconium (Zr)
<1 ppt Bismuth (Bi) Manganese (Mn) <0.1 ppb
Zirconium (Zr) <1 ppt Boron (B) Mercury (Hg) <0.5 ppb
Gallium (Ga) <1 ppt Cadmium (Cd) Molybdenum (Mo) <0.1 ppb
Terbium (Tb) <20 ppt <0.1 ppb
Indium (In) <20 ppt <0.1 ppb
Dysprosium (Dy)
Aluminium (Al) Bottled in class 10 cleanroom conditions.
Antimony (Sb) Lot analysis on the label.
147
H | Hydrochloric acid 37%
Hydrochloric acid 37% d=1.18 Primar Plus Hydrochloric acid 37% d=1.18
for trace metal analysis for electronic use (MOS)
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
250 mÒ HDPE Plastic bottle 1071-6913 H/1196/PB07 2.5 Ò HDPE Plastic bottle 1023-4100 H/1111/PB17
500 mÒ HDPE Plastic bottle 1019-9832 H/1196/PB08 25 Ò HDPE Plastic container 1264-8635 H/1111/25
1 Ò HDPE Plastic bottle 1062-3014 H/1196/PB15
2.5 Ò HDPE Plastic bottle 1049-6253 H/1196/PB17 HCl ADR/RID: 8, II
CAS: 7647-01-0 EINECS: 231-595-7
HCl ADR/RID: 8, II MW: 36.46 UN: 1789
CAS: 7647-01-0 EINECS: 231-595-7 Density at 20°C: 1.18 GHS: Skin Corr. 1B, STOT SE 3
MW: 36.46 UN: 1789 Boiling point: 57 °C H335, H314
Density at 20°C: 1.18 GHS: Skin Corr. 1B, STOT SE 3 Melting point: -35 °C P305+P351+P338, P310, P280
Boiling point: 57 °C H335, H314
Melting point: -35 °C P305+P351+P338, P310, P280 Assay: 35.5 to 37.5%
Assay: 35 to 38% <0.02 ppm Magnesium (Mg) <0.02 ppm Guaranteed analysis <10 APHA Manganese (Mn) <0.02 ppm
<0.005 ppm Manganese (Mn) <0.002 ppm <2 ppm Molybdenum (Mo) <0.02 ppm
Guaranteed analysis Mercury (Hg) <0.005 ppm Color Nickel (Ni) <0.01 ppm
<0.01 ppm Molybdenum (Mo) <0.002 ppm Free Chlorine (Cl2) <0.5 ppm Potassium (K)
Aluminium (Al) <0.02 ppm Nickel (Ni) <0.005 ppm Aluminium (Al) <0.1 ppm Sodium (Na) <0.5 ppm
Antimony (Sb) <0.005 ppm Potassium (K) Barium (Ba) <0.05 ppm Strontium (Sr) <2 ppm
Arsenic (As) <0.005 ppm Silver (Ag) <0.05 ppm Cadmium (Cd) Titanium (Ti)
Barium (Ba) <0.005 ppm Sodium (Na) <0.002 ppm Calcium (Ca) <1 ppm Total phosphorus (P) <0.02 ppm
Beryllium (Be) <0.002 ppm Strontium (Sr) Chromium (Cr) <0.1 ppm Total silicon (Si) <0.02 ppm
Bismuth (Bi) Thallium (Tl) <0.2 ppm Cobalt (Co) <0.02 ppm Total sulphur (S)
Boron (B) <0.1 ppm Tin (Sn) <0.002 ppm Copper (Cu) <0.1 ppm Vanadium (V) <1 ppm
Cadmium (Cd) <1 ppm Titanium (Ti) <0.005 ppm Iron (Fe) <0.5 ppm Zinc (Zn) <0.5 ppm
Calcium (Ca) Total nitrogen (N) <0.005 ppm Lead (Pb) <0.1 ppm
Free Chlorine (Cl2) <0.005 ppm Total phosphorus (P) <0.005 ppm Lithium (Li) <0.02 ppm <5 ppm
Chromium (Cr) <0.002 ppm Vanadium (V) Magnesium (Mg) <0.5 ppm <0.02 ppm
Cobalt (Co) <0.005 ppm Zinc (Zn) <5 ppm
Copper (Cu) <0.005 ppm Residue after ignition <0.2 ppm Filtered to 0.2 µm. <0.2 ppm
Gallium (Ga) <0.005 ppm Sulfate (SO4) <0.002 ppm
Germanium (Ge) <0.005 ppm <0.01 ppm Hydrochloric acid 37% Certified, Eur.Ph.
Indium (In) <0.0002%
Iron (Fe) <0.1 ppm for analysis with low Cadmium, Lead & Mercury level
Lead (Pb) <0.002 ppm <1 ppm
Lithium (Li) <0.002 ppm
Hydrochloric acid 37% d=1.18 packaging Cat. No Mfr. No
for AAS 500 mÒ HDPE Plastic bottle 1025-4100 H/1180/PB08
1 Ò HDPE Plastic bottle 1262-5167 H/1180/PB15
2.5 Ò HDPE Plastic bottle 1263-5167 H/1180/PB17
packaging Cat. No Mfr. No HCl ADR/RID: 8, II
H/1185/PB17 CAS: 7647-01-0 EINECS: 231-595-7
2.5 Ò Coated Glass bottle 1049-9360 MW: 36.46 UN: 1789
Density at 20°C: 1.18 GHS: Skin Corr. 1B, STOT SE 3
HCl ADR/RID: 8, II Boiling point: 57 °C H335, H314
CAS: 7647-01-0 EINECS: 231-595-7 Melting point: -35 °C P305+P351+P338, P310, P280
MW: 36.46 UN: 1789
Density at 20°C: 1.18 GHS: Skin Corr. 1B, STOT SE 3 Assay: 35.5 to 38% <10 APHA Lithium (Li) <0.01 ppm
Boiling point: 57 °C H335, H314 <1 ppm Magnesium (Mg) <0.1 ppm
Melting point: -35 °C P305+P351+P338, P310, P280 Guaranteed analysis Manganese (Mn)
<0.02 ppm Mercury (Hg) <0.01 ppm
Assay: 35 to 38% Color <0.02 ppm Molybdenum (Mo) <0.005 ppm
Free Chlorine (Cl2) <0.05 ppm Nickel (Ni)
Guaranteed analysis <0.02 ppm Magnesium (Mg) <0.2 ppm Zirconium (Zr) <0.01 ppm Phosphate (PO4) <0.02 ppm
<0.5 ppm Manganese (Mn) <0.02 ppm Gallium (Ga) <0.02 ppm Potassium (K) <0.02 ppm
Cadmium (Cd) Nickel (Ni) <0.02 ppm Aluminium (Al) <0.01 ppm Sodium (Na)
Calcium (Ca) <0.02 ppm Potassium (K) Arsenic (As) <0.02 ppm Strontium (Sr) <0.5 ppm
Cobalt (Co) <0.05 ppm Sodium (Na) <0.2 ppm Barium (Ba) <0.01 ppm Sulfate (SO4) <0.1 ppm
Copper (Cu) Zinc (Zn) <1 ppm Beryllium (Be) Thallium (Tl) <0.5 ppm
Iron (Fe) <0.2 ppm Bismuth (Bi) <0.5 ppm Titanium (Ti) <0.01 ppm
Lead (Pb) <0.05 ppm <0.2 ppm Cadmium (Cd) <0.02 ppm Vanadium (V)
Calcium (Ca) <0.01 ppm Zinc (Zn) <1 ppm
Hydrochloric acid has a concentration of 11.65 M (11.65 N). Chromium (Cr) <0.02 ppm Residue after ignition <0.02 ppm
Cobalt (Co) <0.02 ppm <0.02 ppm
Copper (Cu) <0.02 ppm
Germanium (Ge) <0.2 ppm <0.05 ppm
Iron (Fe) <0.01 ppm
Lead (Pb) <5 ppm
Lot analysis on the label
Read more on page 234
148
Hydrochloric acid 32% | H
Hydrochloric acid 37% d=1.18 Certified AR Assay: 31.5 to 33%
for analysis Mfr. No Guaranteed analysis <10 APHA Nickel (Ni) <0.05 ppm
H/1200/PB08 <1 ppm Potassium (K) <0.5 ppm
packaging Cat. No H/1200/PB15 Color <2 ppm Sodium (Na) <2 ppm
H/1200/PC15 Calcium (Ca) Total phosphorus (P) <1 ppm
500 mÒ HDPE Plastic bottle 1005-3023 H/1200/PB17 Free Chlorine (Cl2) <0.05 ppm Total silicon (Si) <0.5 ppm
1Ò HDPE Plastic bottle 1029-4190 H/1200/PC17 Chromium (Cr) <0.05 ppm Total sulphur (S) <5 ppm
1Ò Coated Glass bottle 1266-6846 Copper (Cu) Zinc (Zn) <0.2 ppm
2.5 Ò HDPE Plastic bottle 1031-6380 H/1200/25 Iron (Fe) <0.5 ppm
2.5 Ò Coated Glass bottle 1018-4763 Lead (Pb) <0.05 ppm <0.02 ppm
25 Ò HDPE Plastic container 1065-7602 <0.05 ppm Magnesium (Mg) <0.02 ppm
<0.02 ppm <0.5 ppm <0.02 ppm
ADR/RID: 8, II <0.02 ppm
HCl EINECS: 231-595-7 <0.1 ppm Typical analysis <0.5 ppm Lithium (Li) <0.02 ppm
CAS: 7647-01-0 UN: 1789 <0.5 ppm <0.02 ppm Manganese (Mn) <0.02 ppm
MW: 36.4536.46 g/mol GHS: Skin Corr. 1B, STOT SE 3 <0.02 ppm Aluminium (Al) <0.05 ppm Molybdenum (Mo)
Density at 20°C: 1.18 H335, H314 Silver (Ag) Strontium (Sr) SLR
Boiling point: 57 °C P305+P351+P338, P310, P280 <2 ppm Arsenic (As) <0.1 ppm Titanium (Ti)
Melting point: -35 °C <0.02 ppm Barium (Ba) <0.05 ppm Vanadium (V) Mfr. No
Cadmium (Cd) <0.02 ppm H/1050/PB17
<5 ppm Cobalt (Co)
<0.1 ppm H/1050/26
Assay: 35 to 38% <0.05 ppm Hydrochloric acid is equivalent to a strength of 10.2M (10.2N).
Lot analysis on the label. <1 ppm
Guaranteed analysis <1 ppm <5 ppm
<10 APHA Mercury (Hg) <0.01 ppm Hydrochloric acid 32% d=1.16 <10 ppm
Color <0.0005% Molybdenum (Mo) <10 ppm
Residue after ignition <0.5 ppm Nickel (Ni) <0.5 ppm specified reagents for general laboratory work- extra pure <2 ppm
Aluminium (Al) <0.01 ppm Potassium (K) <0.1 ppm <20 ppm
Arsenic (As) <0.1 ppm Silver (Ag) packaging Cat. No <2 ppm
Barium (Ba) <0.02 ppm Sodium (Na)
Cadmium (Cd) Strontium (Sr) 2.5 Ò HDPE Plastic bottle 1045-8790 Mfr. No
Calcium (Ca) <1 ppm Sulfate (SO4) 45 Ò Plastic container 1032-6330 H/1000/PB17
Free Chlorine (Cl2) <1 ppm Tin (Sn)
Cobalt (Co) <0.02 ppm Titanium (Ti) HCl UN: 1789
Copper (Cu) <0.1 ppm Total phosphorus (P) CAS: 7647-01-0 GHS: Skin Corr. 1B, Eye
Iron (Fe) <0.5 ppm Vanadium (V) MW: 36.46 Dam. 1, STOT SE 3
Lead (Pb) <0.1 ppm Zinc (Zn) Density at 20°C: 1.16 H335, H314
Lithium (Li) <0.02 ppm Chromium (Cr) Boiling point: 57 °C P301+P330+P331, P280,
Magnesium (Mg) <0.5 ppm Melting point: -35 °C P305+P351+P338, P261,
Manganese (Mn) <0.02 ppm ADR/RID: 8, II P301+P312, P304+P340
EINECS: 231-595-7
Lot analysis on the label.
Hydrochloric acid is equivalent to a strength of 11.65M (11.65N).
Assay: 31 to 33%
Hydrochloric acid 37% d=1.18 SLR Guaranteed analysis <20 APHA Nickel (Ni)
<10 ppm Potassium (K)
specified reagents for general laboratory work- extra pure Color <10 ppm Sodium (Na)
Free Chlorine (Cl2) Total phosphorus (P)
packaging Cat. No Mfr. No Calcium (Ca) <1 ppm Total silicon (Si)
Chromium (Cr) <2 ppm Total sulphur (S)
1 Ò HDPE Plastic bottle 1024-4100 H/1150/PB15 Copper (Cu) <5 ppm Zinc (Zn)
2.5 Ò HDPE Plastic bottle 1000-0180 H/1150/PB17 Iron (Fe) <2 ppm
5 Ò HDPE Plastic bottle 1076-3124 Lead (Pb) <5 ppm
25 Ò HDPE Plastic container 1048-9170 H/1150/21 Magnesium (Mg)
45 Ò Plastic container 1149-3703 H/1150/25
H/1150/26 Hydrochloric acid is equivalent to a strength of 10.2M (10.2N).
HCl ADR/RID: 8, II
CAS: 7647-01-0 EINECS: 231-595-7 Hydrochloric acid 32% d=1.16
MW: 36.46 UN: 1789
Density at 20°C: 1.18 GHS: Skin Corr. 1B, STOT SE 3 Technical, d=1.16
Boiling point: 57 °C H335, H314
Melting point: -35 °C P305+P351+P338, P310, P280
Assay: 35 to 38% packaging Cat. No
1009-0170
Guaranteed analysis <20 APHA Magnesium (Mg) <5 ppm 2.5 Ò HDPE Plastic bottle UN: 1789
<10 ppm Potassium (K) <5 ppm GHS: Skin Corr. 1B, Eye
Color <10 ppm Sodium (Na) <10 ppm HCl Dam. 1, STOT SE 3
Free Chlorine (Cl2) Total phosphorus (P) <10 ppm CAS: 7647-01-0 H335, H314
Calcium (Ca) <2 ppm Total sulphur (S) <20 ppm MW: 36.46 P301+P330+P331, P280,
Copper (Cu) <5 ppm Zinc (Zn) <2 ppm Density at 20°C: 1.16 P305+P351+P338, P261,
Iron (Fe) <2 ppm Boiling point: 57 °C P301+P312, P304+P340
Lead (Pb) Melting point: -35 °C
ADR/RID: 8, II : Pass
Hydrochloric acid is equivalent to a strength of 11.65M (11.65N). EINECS: 231-595-7
Guaranteed analysis
Identity test
Hydrochloric acid 32% d=1.16 Certified AR
for analysis
packaging Cat. No Mfr. No
1 Ò HDPE Plastic bottle 1026-4582 H/1100/PB15
2.5 Ò HDPE Plastic bottle 1045-8980 H/1100/PB17
45 Ò Plastic container 1148-3703
H/1100/26
HCl UN: 1789
CAS: 7647-01-0 GHS: Skin Corr. 1B, Eye
MW: 36.46 Dam. 1, STOT SE 3
Density at 20°C: 1.16 H335, H314
Boiling point: 57 °C P301+P330+P331, P280,
Melting point: -35 °C P305+P351+P338, P261,
ADR/RID: 8, II P301+P312, P304+P340
EINECS: 231-595-7
149
H | Hydrochloric acid 25%
Hydrochloric acid 25% Certified AR, Eur.Ph. Hydrochloric acid solution 5M
for analysis with low Cadmium, Lead & Mercury level pure, Bench Reagent
packaging Cat. No Mfr. No packaging Cat. No Mfr. No
1 Ò HDPE Plastic bottle 1260-5167 H/1020/PB15 2.5 Ò HDPE Plastic bottle 1069-5872 J/4270/17
2.5 Ò HDPE Plastic bottle 1230-7223 H/1020/PB17 25 Ò HDPE Plastic container 1050-1754 J/4270/25
HCl UN: 1789 CAS: 7647-01-0 UN: 1789
CAS: 7647-01-0 GHS: Skin Corr. 1B, Eye Density at 20°C: 1.0 to 1.2 GHS: Skin Irrit. 2, Eye Irrit. 2,
MW: 36.46 Dam. 1, STOT SE 3 Boiling point: 81.5 to 110 °C STOT SE 3
Density at 20°C: 1.12 H335, H314 Melting point: -74 °C H315, H319, H335
Boiling point: 107 °C P280, P301+P330+P331, ADR/RID: 8, II P280, P305+P351+P338
Melting point: -70 °C P310, P305+P351+P338, EINECS: 231-595-7
ADR/RID: 8, II P303+P361+P353, P304+P340
EINECS: 231-595-7 Manufactured to a tolerance of ±2.5%.
Assay: >25.0% <10 APHA Lead (Pb) <0.02 ppm Hydrochloric acid solution 0.2M (0.2N)
<1 ppm Lithium (Li) <0.01 ppm
Guaranteed analysis Magnesium (Mg) NIST Standard solution ready to use, For Volumetric analysis
<0.05 ppm Manganese (Mn) <0.2 ppm
Color <0.2 ppm Mercury (Hg) <0.01 ppm packaging Cat. No Mfr. No
Free Chlorine (Cl2) Molybdenum (Mo) <0.01 ppm
Zirconium (Zr) <0.01 ppm Nickel (Ni) <0.02 ppm 1 Ò HDPE Plastic bottle 1052-2533 J/4340/15
Aluminium (Al) <0.05 ppm Potassium (K) <0.02 ppm 2.5 Ò HDPE Plastic bottle 1067-4722 J/4340/17
Arsenic (As) <0.02 ppm Sodium (Na)
Barium (Ba) <0.05 ppm Strontium (Sr) <0.1 ppm CAS: 7647-01-0
Beryllium (Be) <0.01 ppm Sulfate (SO4) <0.5 ppm Density at 20°C: 1
Bismuth (Bi) Thallium (Tl) <0.01 ppm Boiling point: 100 °C
Cadmium (Cd) <1 ppm Titanium (Ti) EINECS: 231-595-7
Calcium (Ca) <0.02 ppm Vanadium (V) <1 ppm
Chromium (Cr) <0.01 ppm Zinc (Zn) <0.05 ppm Manufactured to a tolerance of ± 0.1%.
Cobalt (Co) <0.02 ppm <0.05 ppm See the full range of Standard Volumetric solution page 323.
Copper (Cu) <0.05 ppm <0.01 ppm
Germanium (Ge) <0.05 ppm
Iron (Fe) <0.2 ppm
Lot analysis on the label Hydrochloric acid solution 0.1M (0.1N) Eur.Ph. , BP
NIST Standard solution ready to use, For Volumetric analysis
Hydrochloric acid 20% d=1.1 Primar packaging Cat. No Mfr. No
J/4350/15
for trace metal analysis Mfr. No 1 Ò HDPE Plastic bottle 1032-5710 J/4350/17
H/1190/PB08 2.5 Ò HDPE Plastic bottle 1041-9560 J/4350/21
packaging Cat. No H/1190/PB17 5 Ò HDPE Plastic bottle 1051-0921 J/4350/24
10 Ò Bag in box 1043-9560 J/4350/25
500 mÒ HDPE Plastic bottle 1022-4150 25 Ò HDPE Plastic container 1261-6727
2.5 Ò HDPE Plastic bottle 1016-1950 Mfr. No
CAS: 7647-01-0 J/4350C/05
HCl EINECS: 231-595-7 Density at 20°C: 1 J/4350C/90
CAS: 7647-01-0 UN: 1789 Boiling point: 100 °C
MW: 36.46 GHS: Skin Irrit. 2, Eye Irrit. 2, EINECS: 231-595-7
Density at 20°C: 1.05 to 1.12 STOT SE 3
Boiling point: 110 °C H315, H319, H335 Manufactured to a tolerance of ± 0.1%.
ADR/RID: 8, II P280, P305+P351+P338 See the full range of Standard Volumetric solution page 323.
Assay: >20% Hydrochloric acid solution 0.1M (0.1N)
Guaranteed analysis NIST Standard Concentrate, For Volumetric analysis
Aluminium (Al) <0.05 ppm Mercury (Hg) <0.002 ppm packaging Cat. No
Arsenic (As) <0.02 ppm Molybdenum (Mo) <0.005 ppm
Barium (Ba) <0.05 ppm Nickel (Ni) <0.005 ppm 1 Ampoule 1052-8040
Cadmium (Cd) <0.005 ppm Potassium (K) 6 Ampoule 1030-5760
Calcium (Ca) Propan--1-ol <0.2 ppm
Chromium (Cr) <0.2 ppm Sodium (Na) <0.005 ppm CAS: 7647-01-0 UN: 1789
Cobalt (Co) <0.005 ppm Strontium (Sr) Density at 20°C: 1.00 to 1.05 GHS: Met. Corr. 1
Copper (Cu) <0.005 ppm Titanium (Ti) <1 ppm Boiling point: 100 to 103 °C H290
Iron (Fe) Total phosphorus (P) <0.005 ppm ADR/RID: 8, III P234, P390
Lead (Pb) <0.01 ppm Total silicon (Si) <0.005 ppm EINECS: 231-595-7
Lithium (Li) <0.1 ppm Total sulphur (S)
Magnesium (Mg) Vanadium (V) <0.2 ppm Stabilised with 10 ppm of Mercury(II) chloride.
Manganese (Mn) <0.001 ppm Zinc (Zn) <0.5 ppm Each ampoule makes 1 Ò of solution.
<0.002 ppm <0.5 ppm
<0.005 ppm See the full range of Standard Volumetric solution page 323.
<0.02 ppm <0.02 ppm
<0.005 ppm
Hydrochloric acid solution 0.5M (0.5N)
NIST Standard solution ready to use, For Volumetric analysis
Hydrochloric acid solution 2M (2N) packaging Cat. No Mfr. No
pure, Bench Reagent 1Ò HDPE Plastic bottle 1064-6262 J/4330/15
2.5 Ò HDPE Plastic bottle 1008-0210 J/4330/17
packaging Cat. No Mfr. No 25 Ò HDPE Plastic container 1024-7233 J/4330/25
J/4250/17
2.5 Ò HDPE Plastic bottle 1044-7450 CAS: 7647-01-0 UN: 1789
Density at 20°C: 1.00 to 1.05 GHS: Met. Corr. 1
Density at 20°C: 1.0 to 1.2 UN: 1789 Boiling point: 100 to 103 °C H290
Boiling point: 100 °C GHS: Skin Corr. 1B ADR/RID: 8, III P234, P390
Melting point: 0 °C H314 EINECS: 231-595-7
ADR/RID: 8, III P280, P305+P351+P338,
EINECS: 231-595-7 P301+P330+P331, P310 Manufactured to a tolerance of ± 0.1%.
See the full range of Standard Volumetric solution page 323.
Manufactured to a tolerance of ±5%.
150
The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.
Reagentes
Discover the best professional documents and content resources in AnyFlip Document Base.
Search
Fisher reagentes
- 1 - 50
- 51 - 100
- 101 - 150
- 151 - 200
- 201 - 250
- 251 - 300
- 301 - 350
- 351 - 400
- 401 - 450
- 451 - 500
- 501 - 501
Pages: