High Temperature Webbings, Ladders and Tapes
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Contents Australia Office
Tel: 04 0375 3944
About Us, Contact Us and Disclaimer Email: sales@textiletechnologies.com.au
Map
Webbing, Ladder and Tapes By Application
Temperature Resistance Comparison By Fibre Type
Product Range
High Temperature Glass Fixing Tape (130°C)
High Temperature Glass Fixing Tape (180°C)
Reflective Heat Shield Tape
Para Aramid (Kevlar®) Webbing Tape
Supersil Silicone Coated E Glass Knitted Tape
Spun Para Aramid (Kevlar®) Webbing Tape (Continuous Filament)
Technora® Webbing Tape
Electrical Insulation Glass Tape
Thermolastic® Exhaust Insulation Kits (by Culimeta Saveguard Ltd)
E Glass Webbing Tape
Adhesive Backed E Glass Webbing Tape
Graphite Impregnated E Glass Webbing Tape
Heat Cleaned E Glass Webbing Tape
E Glass Wicking Tape
E Glass Wicking Tape (Caramelised)
E Glass Ladder Tape
E Glass Knitted Tape (NT)
Adhesive Backed E Glass Knitted Tape (NT)
E Glass Knitted Tape (Black)
Adhesive Backed E Glass Knitted Tape (Black)
E Glass Knitted Ladder Tape (NT)
Adhesive Backed E Glass Knitted Ladder Tape (NT)
E Glass Knitted Ladder Tape (Black)
Adhesive Backed E Glass Knitted Ladder Tape (Black)
Stainless Steel Fibre Tape
PBO Zylon® Webbing Tape
Basalt Webbing Tape (Twill Weave)
Basalt Webbing Tape (Plain Weave)
HT750 Glass Webbing Tape
HT750 Glass Ladder Tape
Vermiculite Coated E Glass Webbing Tape
Silex Silica Webbing Tape
Silex Silica Ladder Tape
S-TEX-CFW Silica Webbing Tape
S-TEX-CFW-VC Vermiculite Coated Silica Webbing Tape
S-TEX-CFT Silica Webbing Tape
S-TEX-LT Silica Ladder Tape
BSW Bio Soluble Webbing (Wire Reinforced) Tape
BSL Bio Soluble Ladder (Wire Reinforced) Tape
BSW Bio Soluble Webbing (Glass Reinforced) Tape
BSL Bio Soluble Ladder (Glass Reinforced) Tape
Ceramic Fibre Webbing (Wire Reinforced) Tape
Ceramic Fibre Ladder (Wire Reinforced) Tape
Ceramic Fibre Webbing (Glass Reinforced) Tape
Ceramic Fibre Ladder (Glass Reinforced) Tape
Alumina Silica Tape
High Performance Silicone Adhesive Backed Tape
Goldshield Foil Tape
Magma Shield Tape (Kapton® / Basalt Fibre Composite)
Shieldtex 780 - Heat Shield Tape (Adhesive Backed)
Natural Rubber Proofed E Glass Tape
Flameshield Tape (Field Joint Oil and Gas Pipeline Protection)
Fire Poi Wicking Webbing Tape
Stainless Steel / Para Aramid Webbing
UK Office
Tel: 0161 367 1370
Email: sales@textiletechnologies.co.uk
About Us
What we do
Our most important product is knowledge. The knowledge of high temperature thermal insulation textiles and relevant
applications. Whether we weave, braid or coating in house or partner with other leading manufacturers, we can make or
supply the worlds largest range of heat resistant and high performance textiles. Textile Technologies Europe Ltd, formally
known as Cheshire Ribbon Manufacturing began production of trilby hat band ribbons in 1900’s. Over the past decades,
we have accumulated a tremendous amount of knowledge and experience in thermal insulation and heat resistant textiles.
We perceive ourselves to be a “knowledge centre for all things heat related”.
How we think
At Textile Technologies Europe Ltd, we operate on the basis of a simple philosophy: ‘Treat others as you want to be
treated’. This philosophy is reflected in the relationships between the company and all of its employees, how the employees
treat each other, how we treat our customers, how we treat our suppliers, and, we hope, in our personal lives.
The philosophy is simple in statement, but has a tremendous effect. It forces each of us to think about putting ourselves in
the other person’s shoes, and then treating that person as we would want to be treated in the same position.
How we work
Knowledge of high temperature insulation textiles is the essence of what we offer to our customers. Consequently, our
advisors are all people with a technical background. This ensures clear communication. From our sales perspective,
our philosophy enables us to put ourselves in the position of our customer. If we are the customer, we want service,
knowledgeable sales advice, good-quality products at a fair price, and on-time delivery. Therefore, we want to give our
customers exactly what we would want and treat them how we would want to be treated.
Contact Us Textile Technologies Pty Ltd
Sydney
Textile Technologies Europe Ltd NSW
Unit 6a 2092
Kingston Mills Australia
Manchester Road
Hyde Tel: 04 0375 3944
Cheshire Fax: 02 9948 0085
SK14 2BZ Email: sales@textiletechnologies.com.au
Web:
Tel: 0161 367 1370
Fax: 0161 367 1371
Email: sales@textiletechnologies.co.uk
Web: www.textiletechnologies.co.uk
Company Registration Number: 556653
VAT Registration Number: 982 0580 10
Disclaimer
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are
typical values that vary according to application conditions. The values are intended only as a source of information and are
given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic
and actual results may vary from those given above. Purchasers should independently determine prior to use the suitability
of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein are sold subject to
Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Textile Technologies Europe Ltd
Unit 6a
Kingston Mills
Manchester Road
Hyde
Cheshire
SK14 2BZ
Tel: 0161 367 1370
Fax: 0161 367 1371
Email: sales@textiletechnologies.co.uk
Web: www.textiletechnologies.co.uk
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Webbing, Ladder Sections, Tapes and Other By Application
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Temperature Resistance Comparison By Fibre Type
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
High Temperature Glass Fixing Tape (130°C) 130°C
• A glass based adhesive tape designed for long term performance .
• Resistance to continuous high temperature exposure.
• Excellent mechanical and dialelectric strength.
• Excellent abrasion resistance and resistant to tearing.
• Self-adhesive (thermosetting rubber) one side for ease of application.
• Rated to 130ºC (Class B) continuous operation.
• Adhesion to steel 13.7N/25mm.
• Storage: keep dry.
• Excellent solvent and moisture resistance.
• Available in black or white.
Applications
• Excellent for O ring joins, coil end fixing.
• Excellent motor phase insulation.
• Excellent for outer wrap of coil windings.
• Excellent transformer outer insulation.
• Excellent heated conductor and resistance insulation.
• Other technical insulation applications.
Products
Product Code Colour Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
HTGFT/BLACK/25 Black 0.18mm 25mm 55m 1 Coil
HTGFT/BLACK/50 Black 0.18mm 50mm 55m 1 Coil
HTGFT/WHITE/25 White 0.18mm 25mm 50m 1 Coil
HTGFT/WHITE/50 White 0.18mm 50mm 50m 1 Coil
Further Information
Material Safety Data Sheet E Glass Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
High Temperature Glass Fixing Tape (180°C)
• A glass based adhesive tape designed for long term performance and 180°C
resistance to continuous high temperature exposure.
Unit of Sale
• Excellent mechanical and dialelectric strength. 1 Coil
• Self-adhesive one side with backing tape for ease of application. 1 Coil
• Rated to 180ºC
• Excellent solvent and moisture resistance.
Applications
• Excellent for O ring joins, coil end fixing.
• Excellent motor phase insulation.
Products
Product Code Thickness (mm) Width (mm) Coil Length (m)
TT/TAGT-02 0.18mm 25mm 10m
TT/TAGT-01 0.18mm 25mm 33m
Further Information
Material Safety Data Sheet E Glass Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Reflective Heat Shield Tape 160°C /
300°C
• Manufactured from weavelocked continuous filament E glass cloth.
• One side is laminated to a high micron reflective aluminium foil to face the heat
source.
• The other side to a special high temperature modified acrylate high tack self-
adhesive.
• The aluminium foil and weavelock prevent fray when slitting the tape.
• The hot face can cope with radiant ambient ( non contact) temperatures up to
300ºC depending on location of heat source.
• Excellent high tack self-adhesive resistant to 160ºC*.
Applications
• Excellent for covering automotive firewalls.
• Excellent for protecting engine components.
• Excellent for protecting air intakes and filter boxes.
• Excellent general protection against radiant heat.
Products
Product Code Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
HST/040/10 0.5mm 40mm 10m 1 Coil
* These products are designed to reflect ‘radiant’ heat and not designed to be in direct contact with the heat source. Whilst the aluminium foil is
rated up to 400°C it can be limited by the underlying adhesive used to laminate the foil to the glass. If the product is used in very close proximity to
the heat source then Shieldtex780 or MET-TEX should be considered.
Further Information
Material Safety Data Sheet E Glass Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
Example of Product around Cool Air Intake
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Para Aramid Webbing Tape (Spun Yarn) 250°C
• Para Aramid tapes are woven from yarns that are spun from 100%
recycled staple para-aramid fibres.
• Excellent abrasion resistance and high mechanical strength.
• Suitable for temperatures up to 250°C.
• As the fibres are recycled these webbings are more economical but have a
slightly lower temperature rating than virgin continuous filament para-aramid
webbing.
Applications
• Used for wicking in Fire Poi.
• Used as a protective lining of sliding rollers in tempering furnaces for the flat glass industry.
Products
Product Code Thickness (mm) Width (mm) Unit of Sale Supplied
AM-TEX-SW/10/3 3mm 10mm 1 Metre Per 25m Coil
AM-TEX-SW/15/3 3mm 15mm 1 Metre Per 25m Coil
AM-TEX-SW/20/3 3mm 20mm 1 Metre Per 25m Coil
AM-TEX-SW/25/3 3mm 25mm 1 Metre Per 25m Coil
AM-TEX-SW/40/3 3mm 40mm 1 Metre Per 25m Coil
AM-TEX-SW/50/3 3mm 50mm 1 Metre Per 25m Coil
AM-TEX-SW/75/3 3mm 75mm 1 Metre Per 25m Coil
AM-TEX-SW/100/3 3mm 100mm 1 Metre Per 25m Coil
AM-TEX-SW/150/3 3mm 150mm 1 Metre Per 25m Coil
AM-TEX-SW/200/3 3mm 200mm 1 Metre Per 25m Coil
AM-TEX-SW/250/3 3mm 250mm 1 Metre Per 25m Coil
AM-TEX-SW/300/3 3mm 300mm 1 Metre Per 25m Coil
AM-TEX-SW/10/5 5mm 10mm 1 Metre Per 25m Coil
AM-TEX-SW/15/5 5mm 15mm 1 Metre Per 25m Coil
AM-TEX-SW/20/5 5mm 20mm 1 Metre Per 25m Coil
AM-TEX-SW/25/5 5mm 25mm 1 Metre Per 25m Coil
AM-TEX-SW/40/5 5mm 40mm 1 Metre Per 25m Coil
AM-TEX-SW/50/5 5mm 50mm 1 Metre Per 25m Coil
AM-TEX-SW/75/5 5mm 75mm 1 Metre Per 25m Coil
AM-TEX-SW/100/5 5mm 100mm 1 Metre Per 25m Coil
AM-TEX-SW/150/5 5mm 150mm 1 Metre Per 25m Coil
AM-TEX-SW/200/5 5mm 200mm 1 Metre Per 25m Coil
AM-TEX-SW/250/5 5mm 250mm 1 Metre Per 25m Coil
AM-TEX-SW/300/5 5mm 300mm 1 Metre Per 25m Coil
Further Information
Material Safety Data Sheet Aramid Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Supersil Silicone Coated E Glass Knitted Tape 250°C
• E Glass knitted tape covered with a thick layer of high grade red silicone
elastomer rubber.
• It will offer continuous operating temperatures if 250°C and can withstand a
molten metal splash at 1200°C.
• Resistant to most oils, hydraulic fluids, most fuels, acids and alkalis.
• The red colour is due to the high content of iron oxide.
Applications
• Used as taping for high pressure applications in the aluminium, iron metallurgy and naval industries.
• Molten splash protection in industrial furnaces, aluminium, iron metallurgy, foundry and automotive applications.
Products
Product Code Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
SUPERSIL-T/3/25/30 3mm-4mm 25mm 30m 1 Coil
SUPERSIL-T/3/50/30 3mm-4mm 50mm 30m 1 Coil
SUPERSIL-T/3/75/30 3mm-4mm 75mm 30m 1 Coil
SUPERSIL-T/3/100/30 3mm-4mm 100mm 30m 1 Coil
SUPERSIL-T/3/125/30 3mm-4mm 125mm 30m 1 Coil
Further Information
Material Safety Data Sheet Silicone Coated E Glass Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Kevlar® Webbing Tape (Continuous Filament Yarn) 300°C
• Woven from 100% virgin continuous filament para-aramid yarn (commonly
known as Kevlar® if made by Dupont®; or Twaron® if made by Teijin).
• Excellent abrasion resistance and high mechanical strength.
• Suitable for temperatures up to 300°C.
Applications
• Used as a protective lining of sliding rollers in tempering furnaces for the flat glass industry.
Products
Product Code Thickness (mm) Width (mm) Unit of Sale Supplied
AM-TEX-CFW/8/4 4mm 8mm 1 Metre 25m
AM-TEX-CFW/10/2 2mm 10mm 1 Metre 25m
AM-TEX-CFW/12/3 3mm 12mm 1 Metre 25m
AM-TEX-CFW/12/3.5 3.5mm 12mm 1 Metre 25m
AM-TEX-CFW/12/4 4mm 12mm 1 Metre 25m
AM-TEX-CFW/10/5 5mm 10mm 1 Metre 25m
AM-TEX-CFW/12/5 5mm 12mm 1 Metre 25m
Further Information
Material Safety Data Sheet Aramid Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Technora® Webbing Tape
• Manufactured from virgin Technora® para aramid yarn produced exclusively by the 350°C
Teijin® chemical company.
• The main characteristics of this fibre include high tensile strength, a high modulus of
elasticity and excellent resistance to heat and chemical agents, especially acids and
alkalis.
• Technora yarns are very fine ensuring the tapes have a homogenous and regular
resting surface making it an excellent product that will not mark hot sheets of glass.
• Technora tapes have excellent mechanical characteristics (excellent resistance to
cutting, abrasion, tearing and compression) while maintaining the same heat resist-
ance characteristics (up to 350°C).
Applications
• Technora tapes are used for many industrial applications and especially as protective covering for sliding rollers in
hardening furnaces in the flat glass industry.
Products
Product Code Thickness (mm) Width (mm) Unit of Sale Supplied
TECHNORA-CFW/8/4 4mm 8mm 1 Metre 25m
TECHNORA-CFW/10/2 2mm 10mm 1 Metre 25m
TECHNORA-CFW/12/3 3mm 12mm 1 Metre 25m
TECHNORA-CFW/12/3.5 3.5mm 12mm 1 Metre 25m
TECHNORA-CFW/12/4 4mm 12mm 1 Metre 25m
TECHNORA-CFW/12/5 5mm 12mm 1 Metre 25m
Further Information
Material Safety Data Sheet Technora® Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Electrical Insulation Glass Tape 500°C
• EGT is woven from E glass yarns.
• High tensile strength and a good resistance to chemicals.
• Compliant to the requirements for the directive RoHS directive 2011/65/EU.
• Maximum temperature resistance 500°C.
• Thermal Class 220°C according to IEC 60085.
Applications
• Used in all types of electrical equipment as finishing and consolidating tapes.
• Used in low voltage machines as a major insulation layer.
• Used on power and communication cables as a fire barrier.
Products
Product Code Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
EGT9/13/50 0.09mm 13mm 50m 1 Coil
EGT9/20/50 0.09mm 20mm 50m 1 Coil
EGT9/25/50 0.09mm 25mm 50m 1 Coil
EGT9/30/50 0.09mm 30mm 50m 1 Coil
EGT9/38/50 0.09mm 38mm 50m 1 Coil
EGT9/50/50 0.09mm 50mm 50m 1 Coil
EGT13/13/50 0.13mm 13mm 50m 1 Coil
EGT13/20/50 0.13mm 20mm 50m 1 Coil
EGT13/25/50 0.13mm 25mm 50m 1 Coil
EGT13/30/50 0.13mm 30mm 50m 1 Coil
EGT13/38/50 0.13mm 38mm 50m 1 Coil
EGT13/50/50 0.13mm 50mm 50m 1 Coil
EGT23/13/50 0.23mm 13mm 50m 1 Coil
EGT23/20/50 0.23mm 20mm 50m 1 Coil
EGT23/25/50 0.23mm 25mm 50m 1 Coil
EGT23/30/50 0.23mm 30mm 50m 1 Coil
EGT23/38/50 0.23mm 38mm 50m 1 Coil
EGT23/50/50 0.23mm 50mm 50m 1 Coil
Further Information
Material Safety Data Sheet E Glass Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Thermolastic® Exhaust Insulation Kits 550°C
Thermal Insulation of wide bore diesel exhausts
• Can be installed on the vehicle without removing exhaust.
• Efficient, high density insulation acts as heat store, reduces temperature fluctuation
and heat loss.
• Fits any bore size.
• Long life, cost effective.
• Will not slip, bonds together on initial heating.
• Oil and water resistant coating.
• Each layer individually protected from water ingress.
• No special tools required.
• Insulation thickness can easily be varied along the pipe.
• Stays permanently flexible, can accommodate expansion joints.
• Tough outer layer resist frost, stone chips etc.
• Outer layer can be easily repaired or replaced in the event of physical damage.
• Clean to work with using only non toxic materials.
Products
Product Code Description Width (mm) Roll Length (m) Unit of Sale
TSK/01 THERMOLASTIC® Starker Kit contains:
1 roll reflective termination tape Per Kit
2 rolls reflective insulation layer
1 roll protective outer layer red 50mm 3m
1 HT adhesive tape for fixing
1 HT adhesive for TPLR outer layer 50mm 5.5m
75mm 5m
25mm 10m
Tube 82ml
Product Code Description Width (mm) Roll Length (m) Unit of Sale
TCK/01 THERMOLASTIC® Continuation Kit contains:
1 roll reflective termination tape Per Kit
2 rolls reflective insulation layer
1 roll protective outer layer red 50mm 3m
50mm 5.5m
75mm 5m
Guideline to Length of Pipe covered by 1 Kit
Pipe 3 layers of insulation + 1 layer of outer Length covered by 1 kit
75mm 4 layers of insulation + 1 layer of outer = 800mm
75mm 3 layers of insulation + 1 layer of outer = 600mm
100mm 4 layers of insulation + 1 layer of outer = 625mm
100mm 3 layers of insulation + 1 layer of outer = 475mm
125mm = 550mm
Further Information
Material Safety Data Sheet Thermolastic® Exhaust Insulation
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
E Glass Webbing Tape 550°C
• Manufactured from uniform textured filaments of high bulk ‘E’ type glass fibre
yarns resistant to 550°C.
• Inorganic, sterile and incombustible.
• Resistant to oils, solvents and most chemicals.
• Low thermal conductivity typically 0.05W/mk.
Applications
• Is suitable for use as thermal insulation to pipes, exhausts and vessels to
protect personnel and to minimise heat loss.
• Can be easily fabricated into seals and gaskets.
• Can also be used in welding applications for stress relieving and for pre-heat insulation.
• Industrial boiler, furnace, kiln car door seals
• Can be used as oven and furnace fillings and linings.
Products
Product Code Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
GT1076/010/30 1.5mm/2mm 10mm 30m 1 Coil
GT1076/012/30 1.5mm/2mm 12mm 30m 1 Coil
GT1076/015/30 1.5mm/2mm 15mm 30m 1 Coil
GT1076/020/30 1.5mm/2mm 20mm 30m 1 Coil
GT1076/025/30 1.5mm/2mm 25mm 30m 1 Coil
GT1076/030/30 1.5mm/2mm 30mm 30m 1 Coil
GT1076/040/30 1.5mm/2mm 40mm 30m 1 Coil
GT1076/050/30 1.5mm/2mm 50mm 30m 1 Coil
GT1076/060/30 1.5mm/2mm 60mm 30m 1 Coil
GT1076/065/30 1.5mm/2mm 65mm 30m 1 Coil
GT1076/070/30 1.5mm/2mm 70mm 30m 1 Coil
GT1076/075/30 1.5mm/2mm 75mm 30m 1 Coil
GT1076/080/30 1.5mm/2mm 80mm 30m 1 Coil
GT1076/090/30 1.5mm/2mm 90mm 30m 1 Coil
GT1076/100/30 1.5mm/2mm 100mm 30m 1 Coil
GT1076/120/30 1.5mm/2mm 120mm 30m 1 Coil
GT1076/150/30 1.5mm/2mm 150mm 30m 1 Coil
GT1076/200/30 1.5mm/2mm 200mm 30m 1 Coil
GT1076/250/30 1.5mm/2mm 250mm 30m 1 Coil
GT1076/300/30 1.5mm/2mm 300mm 30m 1 Coil
GT1360/010/30 3mm 10mm 30m 1 Coil
GT1360/012/30 3mm 12mm 30m 1 Coil
GT1360/015/30 3mm 15mm 30m 1 Coil
GT1360/020/30 3mm 20mm 30m 1 Coil
GT1360/025/30 3mm 25mm 30m 1 Coil
GT1360/030/30 3mm 30mm 30m 1 Coil
GT1360/040/30 3mm 40mm 30m 1 Coil
GT1360/050/30 3mm 50mm 30m 1 Coil
UK Office continued on next page ....
Tel: 0161 367 1370
Email: sales@textiletechnologies.co.uk Australia Office
Tel: 04 0375 3944
Email: sales@textiletechnologies.com.au
Product Code Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
GT1360/060/30 3mm 60mm 30m 1 Coil
GT1360/065/30 3mm 65mm 30m 1 Coil
GT1360/070/30 3mm 70mm 30m 1 Coil
GT1360/075/30 3mm 75mm 30m 1 Coil
GT1360/080/30 3mm 80mm 30m 1 Coil
GT1360/090/30 3mm 90mm 30m 1 Coil
GT1360/100/30 3mm 100mm 30m 1 Coil
GT1360/120/30 3mm 120mm 30m 1 Coil
GT1360/150/30 3mm 150mm 30m 1 Coil
GT1360/200/30 3mm 200mm 30m 1 Coil
GT1360/250/30 3mm 250mm 30m 1 Coil
GT1360/300/30 3mm 300mm 30m 1 Coil
GT1046/020/30 3mm 20mm 30m 1 Coil
GT1046/025/30 3mm 25mm 30m 1 Coil
GT1046/030/30 3mm 40mm 30m 1 Coil
GT1046/040/30 6mm 40mm 30m 1 Coil
GT1046/050/30 6mm 50mm 30m 1 Coil
GT1046/060/30 6mm 60mm 30m 1 Coil
GT1046/065/30 6mm 65mm 30m 1 Coil
GT1046/075/30 6mm 75mm 30m 1 Coil
GT1046/080/30 6mm 80mm 30m 1 Coil
GT1056/090/30 6mm 90mm 30m 1 Coil
GT1046/100/30 6mm 100mm 30m 1 Coil
GT1046/120/30 6mm 120mm 30m 1 Coil
GT1046/150/30 6mm 150mm 30m 1 Coil
GT1046/200/30 6mm 200mm 30m 1 Coil
GT1046/250/30 6mm 250mm 30m 1 Coil
GT1046/300/30 6mm 300mm 30m 1 Coil
Further Information
Material Safety Data Sheet E Glass Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Adhesive Backed E Glass Webbing Tape 550°C
• Manufactured from uniform textured filaments of high bulk ‘E’ type glass fibre
yarns resistant to 550°C.
• Inorganic, sterile and incombustible.
• Resistant to oils, solvents and most chemicals.
• Low thermal conductivity typically 0.05W/mk.
• Adhesive backing applied for ease of application.
Applications
• Is suitable for use as thermal insulation to pipes, exhausts and vessels to
protect personnel and to minimise heat loss.
• Can be easily fabricated into seals and gaskets.
• Can also be used in welding applications for stress relieving and for pre-heat insulation.
• Industrial boiler, furnace, kiln car door seals
• Can be used as oven and furnace fillings and linings.
Products
Product Code Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
GT1076/010/30AB 1.5mm/2mm 10mm 30m 1 Coil
GT1076/012/30AB 1.5mm/2mm 12mm 30m 1 Coil
GT1076/015/30AB 1.5mm/2mm 15mm 30m 1 Coil
GT1076/020/30AB 1.5mm/2mm 20mm 30m 1 Coil
GT1076/025/30AB 1.5mm/2mm 25mm 30m 1 Coil
GT1076/030/30AB 1.5mm/2mm 30mm 30m 1 Coil
GT1076/040/30AB 1.5mm/2mm 40mm 30m 1 Coil
GT1076/050/30AB 1.5mm/2mm 50mm 30m 1 Coil
GT1360/010/30AB 3mm 10mm 30m 1 Coil
GT1360/012/30AB 3mm 12mm 30m 1 Coil
GT1360/015/30AB 3mm 15mm 30m 1 Coil
GT1360/020/30AB 3mm 20mm 30m 1 Coil
GT1360/025/30AB 3mm 25mm 30m 1 Coil
GT1360/030/30AB 3mm 30mm 30m 1 Coil
GT1360/040/30AB 3mm 40mm 30m 1 Coil
GT1360/050/30AB 3mm 50mm 30m 1 Coil
GT1046/010/30AB 6mm 10mm 30m 1 Coil
GT1046/012/30AB 6mm 12mm 30m 1 Coil
GT1046/015/30AB 6mm 15mm 90m 1 Coil
GT1046/020/30AB 6mm 20mm 30m 1 Coil
GT1046/025/15AB 6mm 25mm 15m 1 Coil
GT1046/025/30AB 6mm 25mm 30m 1 Coil
GT1046/040/30AB 6mm 40mm 30m 1 Coil
GT1046/050/30AB 6mm 50mm 30m 1 Coil
Further Information
Material Safety Data Sheet E Glass Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
UK Officeare sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Graphite Impregnated E Glass Webbing Tape 550°C
• Woven from uniform textured filaments of high bulk ‘E’ type glass fibre yarns
resistant to 550°C, then coated with graphite aqueous dispersions.
• Inorganic, sterile and incombustible.
• Resistant to oils, solvents and most chemicals.
• Low thermal conductivity typically 0.05W/mk.
Applications
• Is suitable for use as thermal insulation to pipes, exhausts and vessels to
protect personnel and to minimise heat loss.
• Can be easily fabricated into seals and gaskets.
• Can also be used in welding applications for stress relieving and for pre-heat insulation.
• Industrial boiler, furnace, kiln car door seals
• Can be used as oven and furnace fillings and linings.
Products
Product Code Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
GT1076/050/10GC 1.5mm 50mm 10m 1 Coil
GT1076/050/20GC 1.5mm 50mm 20m 1 Coil
GT1076/050/30GC 1.5mm 50mm 30m 1 Coil
GT1360/050/30GC 3mm 50mm 30m 1 Coil
Further Information
Material Safety Data Sheet E Glass Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
Example of Product in Application
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Heat Cleaned (Caramelised) E Glass Webbing Tape
• Manufactured from uniform textured filaments of high bulk ‘E’ type glass fibre 550°C
yarns resistant to 550°C.
Unit of Sale
• Inorganic, sterile and incombustible. 1 Coil
• Resistant to oils, solvents and most chemicals. 1 Coil
• Low thermal conductivity typically 0.05W/mk. 1 Coil
• This product has been partially heat cleaned (caramelised) to reduce smoke 1 Coil
and remove starch and other volatiles.
Applications
• Is suitable for use as thermal insulation to pipes, exhausts and vessels to
protect personnel and to minimise heat loss.
• Can be easily fabricated into seals and gaskets.
• Can also be used in welding applications for stress relieving and for pre-heat insulation.
• Industrial boiler, furnace, kiln car door seals
• Can be used as oven and furnace fillings and linings.
Products
Product Code Thickness (mm) Width (mm) Coil Length (m)
GT1076/040/50HC 1.5/2mm 40mm 50m
GT1076/050/10HC 1.5mm 50mm 10m
GT1076/050/20HC 1.5mm 50mm 20m
GT1076/050/30HC 1.5mm 50mm 30m
Further Information
Material Safety Data Sheet E Glass Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
E Glass Wicking Tape 550°C
• Manufactured from uniform textured filaments of high bulk ‘E’ type glass fibre
yarns resistant to 550°C.
• Reinforced with stainless steel wire to create excellent capillary action required
for wicking or strength got strapping.
• Inorganic, sterile and incombustible.
• Resistant to oils, solvents and most chemicals.
Applications
• Wicking.
• Strapping for Insulation Jackets.
Products
Product Code Thickness (mm) Width (mm) Unit of Sale Supplied
GT1076/16/1/WK 1.5mm 16mm 1 Metre 25m Coil
GT1076/25/1/WK 1.5mm 25mm 1 Metre 25m Coil
GT1076/32/1/WK 1.5mm 32mm 1 Metre 25m Coil
GT1076/33/1/WK 1.5mm 33mm 1 Metre 25m Coil
GT1076/35/1/WK 1.5mm 35mm 1 Metre 25m Coil
Further Information
Material Safety Data Sheet E Glass Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
E Glass Wicking Tape (Caramelised) 550°C
• Manufactured from uniform textured filaments of high bulk ‘E’ type glass fibre
yarns resistant to 550°C.
• Reinforced with stainless steel wire to create excellent capillary action required
for wicking or strength got strapping.
• Inorganic, sterile and incombustible.
• Resistant to oils, solvents and most chemicals.
• This product has been partially heat cleaned (caramelised) to reduce smoke
and remove starch and other volatiles.
Applications
• Wicking.
• Strapping for Insulation Jackets.
Products
Product Code Thickness (mm) Width (mm) Unit of Sale Supplied
GT1076/16/1/WKHC 1.5mm 16mm 1 Metre 25m Coil
GT1076/25/1/WKHC 1.5mm 25mm 1 Metre 25m Coil
GT1076/32/1/WKHC 1.5mm 32mm 1 Metre 25m Coil
GT1076/33/1/WKHC 1.5mm 33mm 1 Metre 25m Coil
GT1076/35/1/WKHC 1.5mm 35mm 1 Metre 25m Coil
Further Information
Material Safety Data Sheet E Glass Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
E Glass Ladder Tape 550°C
• Manufactured from uniformed textured filaments of high bulk ‘E’ type glass
fibre yarns resistant to 550°C.
• Inorganic, sterile and incombustible.
• Resistant to oils, solvents and most chemicals.
• Low thermal conductivity typically 0.05W/mk.
Applications
• Warp yarns have been removed to enable the seals to fit over bolt holes /
flanges on boiler, furnace and kiln car doors.
Products
Product Code Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
GL1163/025/30 2mm 25mm 30m 1 Coil
GL1163/030/30 2mm 30mm 30m 1 Coil
GL1163/040/30 2mm 40mm 30m 1 Coil
GL1163/050/30 2mm 50mm 30m 1 Coil
GL1163/075/30 2mm 75mm 30m 1 Coil
GL1163/100/30 2mm 100mm 30m 1 Coil
GL1163/150/30 2mm 150mm 30m 1 Coil
GL1361/025/30 3mm 25mm 30m 1 Coil
GL1361/030/30 3mm 30mm 30m 1 Coil
GL1361/040/30 3mm 40mm 30m 1 Coil
GL1361/050/30 3mm 50mm 30m 1 Coil
GL1361/065/30 3mm 65mm 30m 1 Coil
GL1361/075/30 3mm 75mm 30m 1 Coil
GL1361/100/30 3mm 100mm 30m 1 Coil
GL1361/150/30 3mm 150mm 30m 1 Coil
GL1048/025/30 6mm 25mm 30m 1 Coil
GL1048/030/30 6mm 30mm 30m 1 Coil
GL1048/040/30 6mm 40mm 30m 1 Coil
GL1048/050/30 6mm 50mm 30m 1 Coil
GL1048/065/30 6mm 65mm 30m 1 Coil
GL1048/075/30 6mm 75mm 30m 1 Coil
GL1048/085/30 6mm 85mm 30m 1 Coil
GL1048/100/30 6mm 100mm 30m 1 Coil
GL1048/150/30 6mm 150mm 30m 1 Coil
Further Information
Material Safety Data Sheet E Glass Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
E Glass Knitted Tape (NT) 550°C
• Manufactured from mechanically bulked E Type glass fibre yarn and has been
developed as an ideal medium for thermal insulation and heat sealing applications.
• Knitted constructions tend to be softer, have more loft and more stretch than woven
constructions.
• The basic fibres are lightweight, resilient, incombustible and suitable to 550°C.
• The tape is resistant to oils, most chemicals and solvents, will not rot, and is
unaffected by bacterial growth.
Applications
• Excellent wood burner door seals.
• Excellent for stove door seals.
• Other high temperature door seals.
Products
Product Code Thickness (mm) Width (mm) Supplied Unit of Sale
GKT2/NT/06 2mm 6mm
GKT2/NT/08 2mm 8mm 100m 1 Metre
GKT2/NT/10 2mm 10mm
GKT2/NT/12 2mm 12mm 100m 1 Metre
GKT2/NT/15 2mm 15mm
GKT2/NT/20 2mm 20mm 100m 1 Metre
GKT2/NT/25 2mm 25mm
GKT2/NT/30 2mm 30mm 100m 1 Metre
GKT2/NT/40 2mm 40mm
GKT2/NT/50 2mm 50mm 100m 1 Metre
GKT3/NT/06 3mm 6mm
GKT3/NT/08 3mm 8mm 100m 1 Metre
GKT3/NT/10 3mm 10mm
GKT3/NT/12 3mm 12mm 100m 1 Metre
GKT3/NT/15 3mm 15mm
GKT3/NT/20 3mm 20mm 50m 1 Metre
GKT3/NT/25 3mm 25mm
GKT3/NT/30 3mm 30mm 50m 1 Metre
GKT3/NT/40 3mm 40mm
GKT3/NT/50 3mm 50mm 50m 1 Metre
GKT6/NT/06 6mm 6mm
GKT6/NT/08 6mm 8mm 100m 1 Metre
GKT6/NT/10 6mm 10mm
GKT6/NT/12 6mm 12mm 100m 1 Metre
GKT6/NT/15 6mm 15mm
GKT6/NT/20 6mm 20mm 100m 1 Metre
GKT6/NT/25 6mm 25mm
GKT6/NT/30 6mm 30mm 100m 1 Metre
GKT6/NT/40 6mm 40mm
GKT6/NT/50 6mm 50mm 100m 1 Metre
100m 1 Metre
100m 1 Metre
50m 1 Metre
50m 1 Metre
50m 1 Metre
100m 1 Metre
100m 1 Metre
100m 1 Metre
100m 1 Metre
100m 1 Metre
100m 1 Metre
100m 1 Metre
50m 1 Metre
50m 1 Metre
UK Office 50m 1 Metre
Tel: 0161 367 1370
Email: sales@textiletechnologies.co.uk Australia Officceontinued on next page ....
Tel: 04 0375 3944
Email: sales@textiletechnologies.com.au
Further Information
Material Safety Data Sheet E Glass Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Adhesive Backed E Glass Knitted Tape (NT) 550°C
• Manufactured from mechanically bulked E Type glass fibre yarn and has been developed
as an ideal medium for thermal insulation and heat sealing applications.
• Knitted constructions tend to be softer, have more loft and more stretch than woven
constructions.
• The basic fibres are lightweight, resilient, incombustible and suitable to 550°C.
• The tape is resistant to oils, most chemicals and solvents, will not rot, and is unaffected
by bacterial growth.
• An adhesive backing has been applied to aid with applying the product in situ.
Applications
• Excellent wood burner door seals.
• Excellent for stove door seals.
• Other high temperature door seals.
Products
Product Code Thickness (mm) Width (mm) Supplied Unit of Sale
GKT2AB/NT/06 2mm 6mm
GKT2AB/NT/08 2mm 8mm 100m 1 Metre
GKT2AB/NT/10 2mm 10mm
GKT2AB/NT/12 2mm 12mm 100m 1 Metre
GKT2AB/NT/15 2mm 15mm
GKT2AB/NT/20 2mm 20mm 100m 1 Metre
GKT2AB/NT/25 2mm 25mm
GKT2AB/NT/30 2mm 30mm 100m 1 Metre
GKT2AB/NT/40 2mm 40mm
GKT2AB/NT/50 2mm 50mm 100m 1 Metre
GKT3AB/NT/06 3mm 6mm
GKT3AB/NT/08 3mm 8mm 100m 1 Metre
GKT3AB/NT/10 3mm 10mm
GKT3AB/NT/12 3mm 12mm 100m 1 Metre
GKT3AB/NT/15 3mm 15mm
GKT3AB/NT/20 3mm 20mm 50m 1 Metre
GKT3AB/NT/25 3mm 25mm
GKT3AB/NT/30 3mm 30mm 50m 1 Metre
GKT3AB/NT/40 3mm 40mm
GKT3AB/NT/50 3mm 50mm 50m 1 Metre
GKT6AB/NT/06 6mm 6mm
GKT6AB/NT/08 6mm 8mm 100m 1 Metre
GKT6AB/NT/10 6mm 10mm
GKT6AB/NT/12 6mm 12mm 100m 1 Metre
GKT6AB/NT/15 6mm 15mm
GKT6AB/NT/20 6mm 20mm 100m 1 Metre
GKT6AB/NT/25 6mm 25mm
GKT6AB/NT/30 6mm 30mm 100m 1 Metre
GKT6AB/NT/40 6mm 40mm
GKT6AB/NT/50 6mm 50mm 100m 1 Metre
100m 1 Metre
100m 1 Metre
50m 1 Metre
50m 1 Metre
50m 1 Metre
100m 1 Metre
100m 1 Metre
100m 1 Metre
100m 1 Metre
100m 1 Metre
100m 1 Metre
100m 1 Metre
50m 1 Metre
50m 1 Metre
UK Office 50m 1 Metre
Tel: 0161 367 1370
Email: sales@textiletechnologies.co.uk continued on next page ....
Australia Office
Tel: 04 0375 3944
Email: sales@textiletechnologies.com.au
Further Information
Material Safety Data Sheet E Glass Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
E Glass Knitted Tape (Black) 550°C
• Manufactured from mechanically bulked E Type glass fibre yarn and has been
developed as an ideal medium for thermal insulation and heat sealing applications.
• Knitted constructions tend to be softer, have more loft and more stretch than woven
constructions.
• The basic fibres are lightweight, resilient, incombustible and suitable to 550°C.
• The tape is resistant to oils, most chemicals and solvents, will not rot, and is
unaffected by bacterial growth.
Applications
• Excellent wood burner door seals.
• Excellent for stove door seals.
• Other high temperature door seals.
Products
Product Code Thickness (mm) Width (mm) Supplied Unit of Sale
GKT2/BLACK/06 2mm 6mm
GKT2/BLACK/08 2mm 8mm 100m 1 Metre
GKT2/BLACK/10 2mm 10mm
GKT2/BLACK/12 2mm 12mm 100m 1 Metre
GKT2/BLACK/15 2mm 15mm
GKT2/BLACK/20 2mm 20mm 100m 1 Metre
GKT2/BLACK/25 2mm 25mm
GKT2/BLACK/30 2mm 30mm 100m 1 Metre
GKT2/BLACK/40 2mm 40mm
GKT2/BLACK/50 2mm 50mm 100m 1 Metre
GKT3/BLACK/06 3mm 6mm
GKT3/BLACK/08 3mm 8mm 100m 1 Metre
GKT3/BLACK/10 3mm 10mm
GKT3/BLACK/12 3mm 12mm 100m 1 Metre
GKT3/BLACK/15 3mm 15mm
GKT3/BLACK/20 3mm 20mm 50m 1 Metre
GKT3/BLACK/25 3mm 25mm
GKT3/BLACK/30 3mm 30mm 50m 1 Metre
GKT3/BLACK/40 3mm 40mm
GKT3/BLACK/50 3mm 50mm 50m 1 Metre
GKT6/BLACK/06 6mm 6mm
GKT6/BLACK/08 6mm 8mm 100m 1 Metre
GKT6/BLACK/10 6mm 10mm
GKT6/BLACK/12 6mm 12mm 100m 1 Metre
GKT6/BLACK/15 6mm 15mm
GKT6/BLACK/20 6mm 20mm 100m 1 Metre
GKT6/BLACK/25 6mm 25mm
GKT6/BLACK/30 6mm 30mm 100m 1 Metre
GKT6/BLACK/40 6mm 40mm
GKT6/BLACK/50 6mm 50mm 100m 1 Metre
100m 1 Metre
100m 1 Metre
50m 1 Metre
50m 1 Metre
50m 1 Metre
100m 1 Metre
100m 1 Metre
100m 1 Metre
100m 1 Metre
100m 1 Metre
100m 1 Metre
100m 1 Metre
50m 1 Metre
50m 1 Metre
50m 1 Metre
UK Office Australia Office continued on next page ....
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Further Information
Material Safety Data Sheet E Glass Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Adhesive Backed E Glass Knitted Tape (Black) 550°C
• Manufactured from mechanically bulked E Type glass fibre yarn and has been
developed as an ideal medium for thermal insulation and heat sealing applications.
• Knitted constructions tend to be softer, have more loft and more stretch than woven
constructions.
• The basic fibres are lightweight, resilient, incombustible and suitable to 550°C.
• The tape is resistant to oils, most chemicals and solvents, will not rot, and is
unaffected by bacterial growth.
• An adhesive backing has been applied to aid with applying the product in situ.
Applications
• Excellent wood burner door seals.
• Excellent for stove door seals.
• Other high temperature door seals.
Products
Product Code Thickness (mm) Width (mm) Supplied Unit of Sale
6mm
GKT2AB/BLACK/06 2mm 8mm 100m 1 Metre
GKT2AB/BLACK/08 2mm 10mm
GKT2AB/BLACK/10 2mm 12mm 100m 1 Metre
GKT2AB/BLACK/12 2mm 15mm
GKT2AB/BLACK/15 2mm 20mm 100m 1 Metre
GKT2AB/ BLACK/20 2mm 25mm
30mm 100m 1 Metre
40mm
50mm 100m 1 Metre
6mm
8mm 100m 1 Metre
10mm
GKT2AB/BLACK/25 2mm 12mm 100m 1 Metre
15mm
GKT2AB/BLACK/30 2mm 20mm 50m 1 Metre
25mm
GKT2AB/BLACK40 2mm 30mm 50m 1 Metre
40mm
GKT2AB/BLACK/50 2mm 50mm 50m 1 Metre
6mm
GKT3AB/BLACK/06 3mm 8mm 100m 1 Metre
10mm
GKT3AB/BLACK/08 3mm 12mm 100m 1 Metre
15mm
GKT3AB/BLACK/10 3mm 20mm 100m 1 Metre
25mm
GKT3AB/BLACK/12 3mm 30mm 100m 1 Metre
40mm
GKT3AB/BLACK/15 3mm 50mm 100m 1 Metre
GKT3AB/BLACK/20 3mm 100m 1 Metre
GKT3AB/BLACK/25 3mm 100m 1 Metre
GKT3AB/BLACK/30 3mm 50m 1 Metre
GKT3AB/BLACK/40 3mm 50m 1 Metre
GKT3AB/BLACK/50 3mm 50m 1 Metre
GKT6AB/BLACK/06 6mm
GKT6AB/BLACK/08 6mm 100m 1 Metre
GKT6AB/BLACK/10 6mm
GKT6AB/BLACK/12 6mm 100m 1 Metre
100m 1 Metre
100m 1 Metre
GKT6AB/BLACK/15 6mm 100m 1 Metre
GKT6AB/BLACK/20 6mm
GKT6AB/BLACK/25 6mm 100m 1 Metre
GKT6AB/BLACK/30 6mm
GKT6AB/BLACK/40 6mm 100m 1 Metre
50m 1 Metre
50m 1 Metre
GKT6AB/BLACK/50 6mm 50m 1 Metre
UK Office Australia Officceontinued on next page ....
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Further Information
Material Safety Data Sheet E Glass Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
E Glass Knitted Ladder Tape (NT) 550°C
• Manufactured from mechanically bulked E Type glass fibre yarn and has been developed
as an ideal medium for thermal insulation and heat sealing applications.
• Knitted constructions tend to be softer, have more loft and more stretch than woven
constructions.
• The basic fibres are lightweight, resilient, incombustible and suitable to 550°C.
• The tape is resistant to oils, most chemicals and solvents, will not rot, and is unaffected
by bacterial growth.
• Central warp yarns have been removed to create a ladder effect for bolt holes.
Applications
• Excellent wood burner door seals.
• Excellent for stove door seals.
• Other high temperature door seals.
Products
Product Code Thickness (mm) Width (mm) Supplied Unit of Sale
GKLT3/NT/06 3mm 6mm 100m 1 Metre
GKLT3/NT/08 3mm 8mm 100m 1 Metre
GKLT3/NT/10 3mm 10mm 100m 1 Metre
GKLT3/NT/12 3mm 12mm 100m 1 Metre
GKLT3/NT/15 3mm 15mm 100m 1 Metre
GKLT3/NT/20 3mm 20mm 100m 1 Metre
GKLT3/NT/25 3mm 25mm 100m 1 Metre
GKLT3/NT/30 3mm 30mm 50m 1 Metre
GKLT3/NT/40 3mm 40mm 50m 1 Metre
GKLT3/NT/50 3mm 50mm 50m 1 Metre
GKLT6/NT/06 6mm 6mm 100m 1 Metre
GKLT6/NT/08 6mm 8mm 100m 1 Metre
GKLT6/NT/10 6mm 10mm 100m 1 Metre
GKLT6/NT/12 6mm 12mm 100m 1 Metre
GKLT6/NT/15 6mm 15mm 100m 1 Metre
GKLT6/NT/20 6mm 20mm 100m 1 Metre
GKLT6/NT/25 6mm 25mm 100m 1 Metre
GKLT6/NT/30 6mm 30mm 50m 1 Metre
GKLT6/NT/40 6mm 40mm 50m 1 Metre
GKLT6/NT/50 6mm 50mm 50m 1 Metre
Further Information
Material Safety Data Sheet E Glass Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Adhesive Backed E Glass Knitted Ladder Tape (NT) 550°C
• Manufactured from mechanically bulked E Type glass fibre yarn and has been developed
as an ideal medium for thermal insulation and heat sealing applications.
• Knitted constructions tend to be softer, have more loft and more stretch than woven
constructions.
• The basic fibres are lightweight, resilient, incombustible and suitable to 550°C.
• The tape is resistant to oils, most chemicals and solvents, will not rot, and is unaffected
by bacterial growth.
• Central warp yarns have been removed to create a ladder effect for bolt holes.
• An adhesive backing has been applied to aid with applying the product in situ.
Applications
• Excellent wood burner door seals.
• Excellent for stove door seals.
• Other high temperature door seals
Products
Product Code Thickness (mm) Width (mm) Supplied Unit of Sale
GKLT3AB/NT/06 3mm 6mm 100m 1 Metre
GKLT3AB/NT/08 3mm 8mm 100m 1 Metre
GKLT3AB/NT/10 3mm 10mm 100m 1 Metre
GKLT3AB/NT/12 3mm 12mm 100m 1 Metre
GKLT3AB/NT/15 3mm 15mm 100m 1 Metre
GKLT3AB/NT/20 3mm 20mm 100m 1 Metre
GKLT3AB/NT/25 3mm 25mm 100m 1 Metre
GKLT3AB/NT/30 3mm 30mm 50m 1 Metre
GKLT3AB/NT/40 3mm 40mm 50m 1 Metre
GKLT3AB/NT/50 3mm 50mm 50m 1 Metre
GKLT6AB/NT/06 6mm 6mm 100m 1 Metre
GKLT6AB/NT/08 6mm 8mm 100m 1 Metre
GKLT6AB/NT/10 6mm 10mm 100m 1 Metre
GKLT6AB/NT/12 6mm 12mm 100m 1 Metre
GKLT6AB/NT/15 6mm 15mm 100m 1 Metre
GKLT6AB/NT/20 6mm 20mm 100m 1 Metre
GKLT6AB/NT/25 6mm 25mm 100m 1 Metre
GKLT6AB/NT/30 6mm 30mm 50m 1 Metre
GKLT6AB/NT/40 6mm 40mm 50m 1 Metre
GKLT6AB/NT/50 6mm 50mm 50m 1 Metre
Further Information
Material Safety Data Sheet E Glass Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
E Glass Knitted Ladder Tape (Black)
550°C
• Manufactured from mechanically bulked E Type glass fibre yarn and has been developed
as an ideal medium for thermal insulation and heat sealing applications.
• Knitted constructions tend to be softer, have more loft and more stretch than woven
constructions.
• The basic fibres are lightweight, resilient, incombustible and suitable to 550°C.
• The tape is resistant to oils, most chemicals and solvents, will not rot, and is unaffected
by bacterial growth.
• Central warp yarns have been removed to create a ladder effect for bolt holes.
Applications
• Excellent wood burner door seals.
• Excellent for stove door seals.
• Other high temperature door seals.
Products
Product Code Thickness (mm) Width (mm) Supplied Unit of Sale
GKLT3/BLACK/06 3mm 6mm 100m 1 Metre
GKLT3/BLACK/08 3mm 8mm 100m 1 Metre
GKLT3/BLACK/10 3mm 10mm 100m 1 Metre
GKLT3/BLACK/12 3mm 12mm 100m 1 Metre
GKLT3/BLACK/15 3mm 15mm 100m 1 Metre
GKLT3/BLACK/20 3mm 20mm 100m 1 Metre
GKLT3/BLACK/25 3mm 25mm 100m 1 Metre
GKLT3/BLACK/30 3mm 30mm 50m 1 Metre
GKLT3/BLACK/40 3mm 40mm 50m 1 Metre
GKLT3/BLACK/50 3mm 50mm 50m 1 Metre
GKLT6/BLACK/06 6mm 6mm 100m 1 Metre
GKLT6/BLACK/08 6mm 8mm 100m 1 Metre
GKLT6/BLACK/10 6mm 10mm 100m 1 Metre
GKLT6/BLACK/12 6mm 12mm 100m 1 Metre
GKLT6/BLACK/15 6mm 15mm 100m 1 Metre
GKLT6/BLACK/20 6mm 20mm 100m 1 Metre
GKLT6/BLACK/25 6mm 25mm 100m 1 Metre
GKLT6/BLACK/30 6mm 30mm 50m 1 Metre
GKLT6/BLACK/40 6mm 40mm 50m 1 Metre
GKLT6/BLACK/50 6mm 50mm 50m 1 Metre
Further Information
Material Safety Data Sheet E Glass Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Adhesive Backed E Glass Knitted Ladder Tape (Black)
• Manufactured from mechanically bulked E Type glass fibre yarn and has 550°C
been developed as an ideal medium for thermal insulation and heat sealing
applications. Unit of Sale
1 Metre
• Knitted constructions tend to be softer, have more loft and more stretch than 1 Metre
woven constructions. 1 Metre
1 Metre
• The basic fibres are lightweight, resilient, incombustible and suitable to 550°C. 1 Metre
• The tape is resistant to oils, most chemicals and solvents, will not rot, and is 1 Metre
1 Metre
unaffected by bacterial growth. 1 Metre
• Central warp yarns have been removed to create a ladder effect for bolt holes. 1 Metre
• An adhesive backing has been applied to aid with applying the product in situ. 1 Metre
1 Metre
Applications 1 Metre
1 Metre
• Excellent wood burner door seals. 1 Metre
• Excellent for stove door seals. 1 Metre
• Other high temperature door seals. 1 Metre
• An adhesive backing has been applied to aid with applying the product in situ. 1 Metre
1 Metre
Products 1 Metre
1 Metre
Product Code Thickness (mm) Width (mm) Supplied
GKLT3AB/BLACK/06 3mm 6mm 100m
GKLT3AB/BLACK/08 3mm 8mm 100m
GKLT3AB/BLACK/10 3mm 10mm 100m
GKLT3AB/BLACK/12 3mm 12mm 100m
GKLT3AB/BLACK/15 3mm 15mm 100m
GKLT3AB/BLACK/20 3mm 20mm 100m
GKLT3AB/BLACK/25 3mm 25mm 100m
GKLT3AB/BLACK/30 3mm 30mm 50m
GKLT3AB/BLACK/40 3mm 40mm 50m
GKLT3AB/BLACK/50 3mm 50mm 50m
GKLT6AB/BLACK/06 6mm 6mm 100m
GKLT6AB/BLACK/08 6mm 8mm 100m
GKLT6AB/BLACK/10 6mm 10mm 100m
GKLT6AB/BLACK/12 6mm 12mm 100m
GKLT6AB/BLACK/15 6mm 15mm 100m
GKLT6AB/BLACK/20 6mm 20mm 100m
GKLT6AB/BLACK/25 6mm 25mm 100m
GKLT6AB/BLACK/30 6mm 30mm 50m
GKLT6AB/BLACK/40 6mm 40mm 50m
GKLT6AB/BLACK/50 6mm 50mm 50m
Further Information
Material Safety Data Sheet E Glass Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Stainless Steel Fibre Tape 650°C
• Stainless Steel tapes are made by weaving or knitting one or more layers of AISI
316 L stainless steel yarn in to tape.
• Withstand temperatures up to 650°C.
• Abrasion resistant.
Applications
• Prevents thermal shocks and micro cracks that may be fatal during glass
transformation e.g. bottling operations, glass blowing.
• Can be used for guiding glass items along automatic production lines when folded.
Products
Product Code Thickness (mm) Width (mm) Supplied Unit of Sale
SST/0.4/17 0.4mm 17mm 1 Metre 1 Metre
SST/0.4/25 0.4mm 25mm 1 Metre 1 Metre
SST/0.4/40 0.4mm 40mm 1 Metre 1 Metre
SST/0.6/50 0.6mm 50mm 1 Metre 1 Metre
SST/0.6/85 0.6mm 85mm 1 Metre 1 Metre
SST/0.6/100 0.6mm 100mm 1 Metre 1 Metre
Further Information
Material Safety Data Sheet Stainless Steel Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
PBO Zylon® Webbing Tape 650°C
• Manufactured from 100% PBO yarn. This is truly a ‘high tech’ yarn with better heat and
abrasion resistance than any other high performance yarn yet maintaining a very soft
feel.
• It has superior tensile strength and modulus to aramid fibres (such as Kevlar®’).
• It also offers excellent chemical, creep, and cut/abrasion resistance.
• The tensile strength and impact energy absorption of PBO is more than twice that of
aramid yarns.
• Rated to 650°C.
Applications
• Excellent covering for rollers or pushing devices in the hollow glass and aluminium
processing industries.
• Prevents thermal shocks and micro cracks that may be fatal during bottling operations.
• Can be used for guiding items along automatic production lines when folded.
Products
Product Code Thickness (mm) Width (mm) Supplied Unit of Sale
ZY-TEX-WT/1.5/25 1.5mm 25mm 1 Metre 1 Metre
ZY-TEX-WT/1.5/40 1.5mm 40mm 1 Metre 1 Metre
ZY-TEX-WT/1.5/50 1.5mm 50mm 1 Metre 1 Metre
ZY-TEX-WT/1.5/75 1.5mm 75mm 1 Metre 1 Metre
ZY-TEX-WT/1.5/100 1.5mm 100mm 1 Metre 1 Metre
ZY-TEX-WT/3/25 3mm 25mm 1 Metre 1 Metre
ZY-TEX-WT/3/40 3mm 40mm 1 Metre 1 Metre
ZY-TEX-WT/3/50 3mm 50mm 1 Metre 1 Metre
ZY-TEX-WT/3/75 3mm 75mm 1 Metre 1 Metre
ZY-TEX-WT/3/100 3mm 100mm 1 Metre 1 Metre
ZY-TEX-WT/6/25 6mm 25mm 1 Metre 1 Metre
ZY-TEX-WT/6/40 6mm 40mm 1 Metre 1 Metre
ZY-TEX-WT/6/50 6mm 50mm 1 Metre 1 Metre
ZY-TEX-WT/6/75 6mm 75mm 1 Metre 1 Metre
ZY-TEX-WT/6/100 6mm 100mm 1 Metre 1 Metre
Further Information
Material Safety Data Sheet Zylon® Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Basalt Webbing Tape (Twill Weave)
• Excellent exhaust insulation wrap. 700°C
• Higher tensile strength than E glass.
• Maintains integrity at temperatures up to 560°C. Basalt fibre exhibits
superior temperature resistance compared to E glass fibres in the range
300°- 560°C.
• Short periods to 700°C.
• Resistant to electromagnetic radiation.
• Excellent resistance to chemicals.
Applications
• Excellent Exhaust Wrap.
• Excellent heat insulation of pipes in nuclear plants as basalt is known to resist degradation caused by radiation.
• Basalt also functions in very low temperatures down to – 260°C so are useful for insulating liquid nitrogen tanks and pipes.
Products
Product Code Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
MAGWRAP/30/10 1.5mm 30mm 10m 1 Coil
MAGWRAP/30/15 1.5mm 30mm 15m 1 Coil
MAGWRAP/30/20 1.5mm 30mm 20m 1 Coil
MAGWRAP/30/30 1.5mm 30mm 30m 1 Coil
MAGWRAP/50/10 1.5mm 50mm 10m 1 Coil
MAGWRAP/50/15 1.5mm 50mm 15m 1 Coil
MAGWRAP/50/20 1.5mm 50mm 20m 1 Coil
MAGWRAP/50/30 1.5mm 50mm 30m 1 Coil
MAGWRAP/75/10 1.5mm 75mm 10m 1 Coil
MAGWRAP/75/20 1.5mm 75mm 20m 1 Coil
MAGWRAP/75/30 1.5mm 75mm 30m 1 Coil
MAGWRAP/100/30 1.5mm 100mm 30m 1 Coil
Further Information
Material Safety Data Sheet Basalt Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
Example of Product in Application
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Basalt Webbing Tape (Plain Weave)
• Excellent exhaust insulation wrap. 700°C
• Higher tensile strength than E glass.
• Maintains integrity at temperatures up to 560°C. Basalt fibre exhibits
superior temperature resistance compared to E glass fibres in the range
300°- 560°C.
• Short periods to 700°C.
• Resistant to electromagnetic radiation.
• Excellent resistance to chemicals.
Applications
• Excellent Exhaust Wrap.
• Excellent heat insulation of pipes in nuclear plants as basalt is known to resist degradation caused by radiation.
• Basalt also functions in very low temperatures down to – 260°C so are useful for insulating liquid nitrogen tanks and pipes.
Products
Product Code Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
BWT/25/2/1 2mm 25mm 30m 1 Coil
BWT/40/2/1 1.5mm - 2mm 40mm 30m 1 Coil
BWT/50/2/30 2mm 50mm 30m 1 Coil
Further Information
Material Safety Data Sheet Basalt Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
HT750 Glass Webbing Tape 750°C
• HT750 glass webbing tapes are made by weaving chemically modified E glass yarns
rated to 700°C continuous 750°C short term.
• HT self-adhesive backings (for ease of application) and / or vermiculite dispersions (to
increase temperature resistance to 1000°C) can also be applied. HT750+
Applications
• Is suitable for use as thermal insulation to pipes, exhausts and vessels to protect
personnel and to minimise heat loss.
• Can be easily fabricated into seals and gaskets.
• Can also be used in welding applications for stress relieving and for pre-heat insulation.
• Industrial boiler, furnace, kiln car door seals
• Can be used as oven and furnace fillings and linings.
Products
Product Code Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
HT750-W/2/20/25 2mm 20mm 25m 1 Coil
HT750-W/2/25/25 2mm 25mm 25m 1 Coil
HT750-W/2/30/25 2mm 30mm 25m 1 Coil
HT750-W/2/40/25 2mm 40mm 25m 1 Coil
HT750-W/2/50/25 2mm 50mm 25m 1 Coil
HT750-W/2/60/25 2mm 60mm 25m 1 Coil
HT750-W/2/70/25 2mm 70mm 25m 1 Coil
HT750-W/2/80/25 2mm 80mm 25m 1 Coil
HT750-W/2/100/25 2mm 100mm 25m 1 Coil
HT750-W/2/120/25 2mm 120mm 25m 1 Coil
HT750-W/2/150/25 2mm 150mm 25m 1 Coil
HT750-W/2/200/25 2mm 200mm 25m 1 Coil
HT750-W/2/250/25 2mm 250mm 25m 1 Coil
HT750-W/2/300/25 2mm 300mm 25m 1 Coil
HT750-W/3/20/25 3mm 20mm 25m 1 Coil
HT750-W/3/25/25 3mm 25mm 25m 1 Coil
HT750-W/3/40/25 3mm 40mm 25m 1 Coil
HT750-W/3/50/25 5mm 50mm 25m 1 Coil
HT750-W/3/60/25 3mm 60mm 25m 1 Coil
HT750-W/3/70/25 3mm 70mm 25m 1 Coil
HT750-W/3/80/25 3mm 80mm 25m 1 Coil
HT750-W/3/100/25 3mm 100mm 25m 1 Coil
HT750-W/3/120/25 3mm 120mm 25m 1 Coil
HT750-W/3/150/25 3mm 150mm 25m 1 Coil
HT750-W/3/200/25 3mm 200mm 25m 1 Coil
HT750-W/3/250/25 3mm 250mm 25m 1 Coil
HT750-W/3/300/25 3mm 300mm 25m 1 Coil
HT750-W/5/20/25 5mm 20mm 25m 1 Coil
HT750-W/5/25/25 5mm 25mm 25m 1 Coil
UK Office continued on next page ....
Tel: 0161 367 1370
Email: sales@textiletechnologies.co.uk Australia Office
Tel: 04 0375 3944
Email: sales@textiletechnologies.com.au
Product Code Thickness (mm) Width (mm) Roll Length (m) Unit of Sale
HT750-W/5/30/25 5mm 30mm 25m 1 Coil
HT750-W/5/40/25 5mm 40mm 25m 1 Coil
HT750-W/5/50/25 5mm 50mm 25m 1 Coil
HT750-W/5/60/25 5mm 60mm 25m 1 Coil
HT750-W/5/70/25 5mm 70mm 25m 1 Coil
HT750-W/5/80/25 5mm 80mm 25m 1 Coil
HT750-W/5/100/25 5mm 100mm 25m 1 Coil
HT750-W/5/120/25 5mm 120mm 25m 1 Coil
HT750-W/5/150/25 5mm 150mm 25m 1 Coil
HT750-W/5/200/25 5mm 200mm 25m 1 Coil
HT750-W/5/250/25 5mm 250mm 25m 1 Coil
HT750-W/5/300/25 5mm 300mm 25m 1 Coil
Further Information
Material Safety Data Sheet HT750 Glass Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
HT750 Glass Ladder Tape
• HT750 glass ladder tapes are made by weaving chemically modified E glass yarns 750°C
rated to 700°C continuous 750°C short term.
• HT self-adhesive backings (for ease of application) and / or vermiculite dispersions (to
increase temperature resistance to 1000°C) can also be applied. HT750+
• Central warp yarns have been removed to create a ladder section to enable
application over bolts suitable for boiler, furnace and kiln car door seals.
Applications
• Warp yarns removed to enable the seals to fit over bolt holes / flanges on boiler, furnace and kiln car doors.
Products
Product Code Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
HT750-LT/2/20/25 2mm 20mm
HT750-LT/2/25/25 2mm 25mm 25m 1 Coil
HT750-LT/2/40/25 2mm 40mm
HT750-LT/2/50/25 2mm 50mm 25m 1 Coil
HT750-LT/2/60/25 2mm 60mm
HT750-LT/2/70/25 2mm 70mm 25m 1 Coil
HT750-LT/2/75/25 2mm 75mm
HT750-LT/2/80/25 2mm 80mm 25m 1 Coil
HT750-LT/2/100/25 2mm 100mm
HT750-LT/2/120/25 2mm 120mm 25m 1 Coil
HT750-LT/2/150/25 2mm 150mm
HT750-LT/2/200/25 2mm 200mm 25m 1 Coil
HT750-LT/2/250/25 2mm 250mm
HT750-LT/2/300/25 2mm 300mm 25m 1 Coil
HT750-LT/3/20/25 3mm 20mm
HT750-LT/3/25/25 3mm 25mm 25m 1 Coil
HT750-LT/3/40/25 3mm 40mm
HT750-LT/3/50/25 3mm 50mm 25m 1 Coil
HT750-LT/3/60/25 3mm 60mm
HT750-LT/3/70/25 3mm 70mm 25m 1 Coil
HT750-LT/3/75/25 3mm 75mm
HT750-LT/3/80/25 3mm 80mm 25m 1 Coil
HT750-LT/3/100/25 3mm 100mm
HT750-LT/3/120/25 3mm 120mm 25m 1 Coil
HT750-LT/3/150/25 3mm 150mm
HT750-LT/3/200/25 3mm 200mm 25m 1 Coil
HT750-LT/3/250/25 3mm 250mm
HT750-LT/3/300/25 3mm 300mm 25m 1 Coil
HT750-LT/5/20/25 5mm 20mm
HT750-LT/5/25/25 5mm 25mm 25m 1 Coil
HT750-LT/5/30/25 5mm 30mm
25m 1 Coil
25m 1 Coil
25m 1 Coil
25m 1 Coil
25m 1 Coil
25m 1 Coil
25m 1 Coil
25m 1 Coil
25m 1 Coil
25m 1 Coil
25m 1 Coil
25m 1 Coil
25m 1 Coil
25m 1 Coil
25m 1 Coil
25m 1 Coil
continued on next page ....
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Product Code Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
HT750-LT/5/40/25 5mm 40mm 25m 1 Coil
HT750-LT/5/50/25 5mm 50mm 25m 1 Coil
HT750-LT/5/60/25 5mm 60mm 25m 1 Coil
HT750-LT/5/70/25 5mm 70mm 25m 1 Coil
HT750-LT/5/80/25 5mm 80mm 25m 1 Coil
HT750-LT/5/100/25 5mm 100mm 25m 1 Coil
HT750-LT/5/120/25 5mm 120mm 25m 1 Coil
HT750-LT/5/150/25 5mm 150mm 25m 1 Coil
HT750-LT/5/200/25 5mm 200mm 25m 1 Coil
HT750-LT/5/250/25 5mm 250mm 25m 1 Coil
HT750-LT/5/300/25 5mm 300mm 25m 1 Coil
Further Information
Material Safety Data Sheet HT750 Glass Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Vermiculite Coated E Glass Webbing Tape
• Manufactured from uniform textured filaments of high bulk ‘E’ type glass fibre 550°C /
yarns resistant to 550°C. 1000°C
• Inorganic, sterile and incombustible.
• Resistant to oils, solvents and most chemicals.
• Low thermal conductivity typically 0.05W/mk.
• Coated with a vermiculite dispersion to increase temperature resistance to
1000°C.
Applications
• Is suitable for use as thermal insulation to pipes, exhausts and vessels to protect personnel and to minimise heat loss.
• Can be easily fabricated into seals and gaskets.
• Can also be used in welding applications for stress relieving and for pre-heat insulation.
• Can be used as oven and furnace fillings and linings.
• Excellent molten splash protection.
Products
Product Code Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
GT1076/050/15VC 1.5mm 50mm 15m 1 Coil
GT1076/050/30VC 1.5mm 50mm 30m 1 Coil
GT1360/025/25VC 3mm 25mm 25m 1 Coil
GT1360/050/25VC 3mm 50mm 25m 1 Coil
GT1360/075/25VC 3mm 75mm 25m 1 Coil
GT1360/100/25VC 3mm 100mm 25m 1 Coil
Further Information
Material Safety Data Sheet E Glass Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Silex Silica Webbing Tape 1000°C
• SXWT is made by weaving yarns made from 9 micron staple (short) silica fibre
guaranteeing excellent thermal insulation properties.
• SXWT tape causes little irritation and resists continuous temperatures up to
1000°C.
• SXWT does not vitrify and is recommended in substitution of ceramic fibre
webbing.
• SXWT exhibits excellent chemical stability resisting attack from organic agents,
water and hot acids (except hydrofluoric acid).
Applications
• Can be used to help insulate and therefore control the cooling of castings.
• Excellent insulation of gas and steam turbines.
• Excellent for welding curtains.
• Excellent insulation linings.
• Excellent exhaust insulation.
• Excellent radiant heat protection.
• Excellent boiler, furnace and kiln car door seals.
Products
Product Code Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
SXWT/25/2/25 2mm 25mm
SXWT/40/2/25 2mm 40mm 25m 1 Coil
SXWT/50/2/25 2mm 50mm
SXWT/75/2/25 2mm 75mm 25m 1 Coil
SXWT/100/2/25 2mm 100mm
SXWT/150/2/25 2mm 150mm 25m 1 Coil
SXWT/200/2/25 2mm 200mm
SXWT/250/2/25 2mm 250mm 25m 1 Coil
SXWT/300/2/25 2mm 300mm
SXWT/25/3/25 3mm 25mm 25m 1 Coil
SXWT/40/3/25 3mm 40mm
SXWT/50/3/25 3mm 50mm 25m 1 Coil
SXWT/75/3/25 3mm 75mm
SXWT/100/3/25 3mm 100mm 25m 1 Coil
SXWT/150/3/25 3mm 150mm
SXWT/200/3/25 3mm 200mm 25m 1 Coil
SXWT/250/3/25 3mm 250mm
SXWT/300/3/25 3mm 300mm 25m 1 Coil
SXWT/25/5/25 5mm 25mm
SXWT/40/5/25 5mm 40mm 25m 1 Coil
SXWT/50/5/25 5mm 50mm
SXWT/75/5/25 5mm 75mm 25m 1 Coil
SXWT/100/5/25 5mm 100mm
SXWT/150/5/25 5mm 150mm 25m 1 Coil
SXWT/200/5/25 5mm 200mm
25m 1 Coil
25m 1 Coil
25m 1 Coil
25m 1 Coil
25m 1 Coil
25m 1 Coil
25m 1 Coil
25m 1 Coil
25m 1 Coil
25m 1 Coil
25m 1 Coil
25m 1 Coil
25m 1 Coil
continued on next page ....
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Product Code Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
SXWT/250/5/25 5mm 250mm 25m 1 Coil
SXWT/300/5/25 5mm 300mm 25m 1 Coil
Further Information
Material Safety Data Sheet Silex Silica Fibre Textiles
Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
Silex Silica Ladder Tape 1000°C
• SXLT is made by weaving yarns made from 9 micron staple (short) silica fibre
guaranteeing excellent thermal insulation properties.
• SXLT tape causes little irritation and resists continuous temperatures up to
1000°C.
• SXLT does not vitrify and is recommended in substitution of ceramic fibre
webbing.
• SXLT exhibits excellent chemical stability resisting attack from organic agents,
water and hot acids (except hydrofluoric acid).
Applications
• Central warp yarns have been removed to create a ladder section to enable application over bolts suitable for boiler,
furnace and kiln car door seals.
Products
Product Code Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
25mm
SXLT/25/2/25 2mm 30mm 25m 1 Coil
40mm
SXLT/30/2/25 2mm 50mm 25m 1 Coil
75mm
SXLT/40/2/25 2mm 100mm 25m 1 Coil
150mm
SXLT/50/2/25 2mm 200mm 25m 1 Coil
250mm
SXLT/75/2/25 2mm 300mm 25m 1 Coil
25mm
SXLT/100/2/25 2mm 30mm 25m 1 Coil
40mm
SXLT/150/2/25 2mm 50mm 25m 1 Coil
75mm
SXLT/200/2/25 2mm 100mm 25m 1 Coil
150mm
SXLT/250/2/25 2mm 200mm 25m 1 Coil
250mm
SXLT/300/2/25 2mm 300mm 25m 1 Coil
25mm
SXLT/25/3/25 3mm 30mm 25m 1 Coil
40mm
SXLT/30/3/25 3mm 50mm 25m 1 Coil
75mm
SXLT/40/3/25 3mm 100mm 25m 1 Coil
150mm
SXLT/50/3/25 3mm 200mm 25m 1 Coil
250mm
SXLT/75/3/25 3mm 300mm 25m 1 Coil
SXLT/100/3/25 3mm 25m 1 Coil
SXLT/150/3/25 3mm 25m 1 Coil
SXLT/200/3/25 3mm 25m 1 Coil
SXLT/250/3/25 3mm 25m 1 Coil
SXLT/300/3/25 3mm 25m 1 Coil
SXLT/25/5/25 5mm 25m 1 Coil
SXLT/30/5/25 5mm 25m 1 Coil
SXLT/40/5/25 5mm 25m 1 Coil
SXLT/50/5/25 5mm 25m 1 Coil
SXLT/75/5/25 5mm 25m 1 Coil
SXLT/100/5/25 5mm 25m 1 Coil
SXLT/150/5/25 5mm 25m 1 Coil
SXLT/200/5/25 5mm 25m 1 Coil
SXLT/250/5/25 5mm 25m 1 Coil
SXLT/300/5/25 5mm 25m 1 Coil
UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: sales@textiletechnologies.co.uk Email: sales@textiletechnologies.com.au
The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.
ladder webbing brochure
Discover the best professional documents and content resources in AnyFlip Document Base.
Search