ladder webbing brochure

Further Information

Material Safety Data Sheet Silex Silica Fibre Textiles

Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

S-TEX-CFW Silica Webbing Tape 1000°C

• S-TEX-CFW is made by weaving textured twisted continuous filament silica yarn
guaranteeing excellent thermal insulation properties.

• S-TEX-CFW tape causes little irritation and resists continuous temperatures up
to 1000°C.

• S-TEX-CFW does not vitrify and is recommended in substitution of ceramic fibre
webbing.

• S-TEX-CFW exhibits excellent chemical stability resisting attack from organic
agents, water and hot acids (except hydrofluoric acid).

• S-TEX-CFW webbings are produced using yarns manufactured in accordance
with DIN and EN European standards.

• Silica tape is incombustible according to DIN 4102 A2.

Applications

• Can be used to help insulate and therefore control the cooling of castings.
• Excellent insulation of gas and steam turbines.
• Excellent welding curtains.
• Excellent insulation linings.
• Excellent exhaust insulation.
• Excellent radiant heat protection.
• Excellent boiler, furnace and kiln car door seals.

Products

Product Code Thickness (mm) Width (mm) Supplied Unit of Sale
S-TEX-CFW/2/25 2mm 25mm
S-TEX-CFW/2/40 2mm 40mm 25m 1 Metre
S-TEX-CFW/2/50 2mm 50mm
S-TEX-CFW/2/60 2mm 60mm 25m 1 Metre
S-TEX-CFW/2/70 2mm 70mm
S-TEX-CFW/2/75 2mm 75mm 25m 1 Metre
S-TEX-CFW/2/80 2mm 80mm
S-TEX-CFW/2/100 2mm 100mm 25m 1 Metre
S-TEX-CFW/2/150 2mm 150mm
S-TEX-CFW/2/200 2mm 200mm 25m 1 Metre
S-TEX-CFW/2/250 2mm 250mm
S-TEX-CFW/2/300 2mm 300mm 25m 1 Metre
S-TEX-CFW/3/25 3mm 25mm
S-TEX-CFW/3/40 3mm 40mm 25m 1 Metre
S-TEX-CFW/3/50 3mm 50mm
S-TEX-CFW/3/60 3mm 60mm 25m 1 Metre
S-TEX-CFW/3/70 3mm 70mm
S-TEX-CFW/3/75 3mm 75mm 25m 1 Metre
S-TEX-CFW/3/80 3mm 80mm
S-TEX-CFW/3/100 3mm 100mm 25m 1 Metre
S-TEX-CFW/3/150 3mm 150mm
S-TEX-CFW/3/200 3mm 200mm 25m 1 Metre
S-TEX-CFW/3/250 3mm 250mm
S-TEX-CFW/3/300 3mm 300mm 25m 1 Metre

25m 1 Metre

25m 1 Metre

25m 1 Metre

25m 1 Metre

25m 1 Metre

25m 1 Metre

25m 1 Metre

25m 1 Metre

25m 1 Metre

25m 1 Metre

25m 1 Metre

UK Office 25m 1 Metre
Tel: 0161 367 1370
Email: [email protected] Australia Officceontinued on next page ....
Tel: 04 0375 3944
Email: [email protected]

Product Code Thickness (mm) Width (mm) Supplied Unit of Sale
S-TEX-CFW/5/30 5mm 30mm 25m 1 Metre
S-TEX-CFW/5/40 5mm 40mm 25m 1 Metre
S-TEX-CFW/5/50 5mm 50mm 25m 1 Metre
S-TEX-CFW/5/60 5mm 60mm 25m 1 Metre
S-TEX-CFW/5/70 5mm 70mm 25m 1 Metre
S-TEX-CFW/5/75 5mm 75mm 25m 1 Metre
S-TEX-CFW/5/80 5mm 80mm 25m 1 Metre
S-TEX-CFW/5/100 5mm 100mm 25m 1 Metre
S-TEX-CFW/5/150 5mm 150mm 25m 1 Metre
S-TEX-CFW/5/200 5mm 200mm 25m 1 Metre
S-TEX-CFW/5/250 5mm 250mm 25m 1 Metre
S-TEX-CFW/5/300 5mm 300mm 25m 1 Metre

Further Information

Material Safety Data Sheet S-TEX Silica Fibre Textiles

Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

S-TEX-CFW-VC Vermiculite Coated Silica Webbing Tape 1000°C

• S-TEX-CFW is made by weaving textured twisted continuous filament silica yarn
guaranteeing excellent thermal insulation properties.

• S-TEX-CFW tape causes little irritation and resists continuous temperatures up
to 1000°C.

• S-TEX-CFW does not vitrify and is recommended in substitution of ceramic fibre
webbing.

• S-TEX-CFW exhibits excellent chemical stability resisting attack from organic
agents, water and hot acids (except hydrofluoric acid).

• A Vermiculite dispersions has been added to improve resistance to molten
splash and greatly improve abrasion resistance.

• S-TEX-CFW webbings are produced using yarns manufactured in accordance
with DIN and EN European standards.

• Silica tape is incombustible according to DIN 4102 A2.

Applications

• Can be used to help insulate and therefore control the cooling of castings.
• Excellent insulation of gas and steam turbines.
• Excellent welding curtains.
• Excellent insulation linings.
• Excellent radiant heat protection.
• Excellent molten splash protection.
• Excellent exhaust insulation for turbo charged engines.

Products

Product Code Thickness (mm) Width (mm) Supplied Unit of Sale
S-TEX-CFW/2/50/VC 2mm 50mm 25m 1 Metre

Further Information

Material Safety Data Sheet S-TEX Silica Fibre Textiles

Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

S-TEX-CFT Silica Webbing Tape 1000°C

• S-TEX-CFT is made by weaving non-textured twisted continuous filament silica yarn
combining excellent temperature resistance and strength.

• S-TEX-CFT tape causes little irritation and resists continuous temperatures up to
1000°C.

• S-TEX-CFT does not vitrify and is recommended in substitution of ceramic fibre
webbing.

• S-TEX-CFT exhibits excellent chemical stability resisting attack from organic agents,
water and hot acids (except hydrofluoric acid).

• Prevents thermal shocks and micro cracks that may be fatal during bottling operations.
• Abrasion resistant.
• Silica tape is incombustible according to DIN 4102 A2.

Applications

• Excellent exhaust insulation.
• Excellent protection against molten splash.
• Tight weave makes this tape excellent for strapping or hemming on insulation jackets.
• Excellent covering for rollers or pushing devices in the hollow glass industry.
• Can be used for guiding items along automatic production lines when folded.

Products

Product Code Thickness (mm) Width (mm) Supplied Unit of Sale
S-TEX-CFT/0.5/17 0.5mm 17mm 50m 1 Metre
S-TEX-CFT/0.5/25 0.5mm 25mm 50m 1 Metre
S-TEX-CFT/0.5/30 0.5mm 30mm 50m 1 Metre
S-TEX-CFT/0.5/40 0.5mm 40mm 50m 1 Metre
S-TEX-CFT/0.5/50 0.5mm 50mm 50m 1 Metre
S-TEX-CFT/0.5/75 0.5mm 75mm 50m 1 Metre
S-TEX-CFT/0.5/100 0.5mm 100mm 50m 1 Metre
S-TEX-CFT/0.5/150 0.5mm 150mm 50m 1 Metre
S-TEX-CFT/0.5/200 0.5mm 200mm 50m 1 Metre
S-TEX-CFT/0.5/250 0.5mm 250mm 50m 1 Metre
S-TEX-CFT/0.5/300 0.5mm 300mm 50m 1 Metre
S-TEX-CFT/1.5/17 1.5mm 17mm 30m 1 Metre
S-TEX-CFT/1.5/25 1.5mm 25mm 30m 1 Metre
S-TEX-CFT/1.5/30 1.5mm 30mm 30m 1 Metre
S-TEX-CFT/1.5/40 1.5mm 40mm 30m 1 Metre
S-TEX-CFT/1.5/50 1.5mm 50mm 30m 1 Metre
S-TEX-CFT/1.5/75 1.5mm 75mm 30m 1 Metre
S-TEX-CFT1.5/100 1.5mm 100mm 30m 1 Metre
S-TEX-CFT/1.5/150 1.5mm 150mm 30m 1 Metre
S-TEX-CFT/1.5/200 1.5mm 200mm 30m 1 Metre
S-TEX-CFT/1.5/250 1.5mm 250mm 30m 1 Metre
S-TEX-CFT/1.5/300 1.5mm 300mm 30m 1 Metre

continued on next page ....

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

Further Information

Material Safety Data Sheet S-TEX Continuous Filament Silica Fibre Textiles

Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

S-TEX-LT Silica Ladder Tape

• S-TEX-LT is made by weaving textured twisted continuous filament silica yarn 1000°C
guaranteeing excellent thermal insulation properties.

• S-TEX-LT tape causes little irritation and resists continuous temperatures up to
1000°C.

• S-TEX-LT does not vitrify and is recommended in substitution of ceramic fibre
webbing.

• S-TEX-LT exhibits excellent chemical stability resisting attack from organic agents,
water and hot acids (except hydrofluoric acid).

Applications

• Central warp yarns have been removed to create a ladder section to enable application over bolts suitable for boiler,
furnace and kiln car door seals.

Products

Product Code Thickness (mm) Width (mm) Supplied Unit of Sale
S-TEX-LT/2/25 2mm 25mm
S-TEX-LT/2/40 2mm 40mm 25m 1 Metre
S-TEX-LT/2/50 2mm 50mm
S-TEX-LT/2/60 2mm 60mm 25m 1 Metre
S-TEX-LT/2/70 2mm 70mm
S-TEX-LT/2/75 2mm 75mm 25m 1 Metre
S-TEX-LT/2/80 2mm 80mm
S-TEX-LT/2/100 2mm 100mm 25m 1 Metre
S-TEX-LT/2/150 2mm 150mm
S-TEX-LT/2/200 2mm 200mm 25m 1 Metre
S-TEX-LT/2/250 2mm 250mm
S-TEX-LT/2/300 2mm 300mm 25m 1 Metre
S-TEX-LT/3/25 3mm 25mm
S-TEX-LT/3/40 3mm 40mm 25m 1 Metre
S-TEX-LT/3/50 3mm 50mm
S-TEX-LT/3/60 3mm 60mm 25m 1 Metre
S-TEX-LT/3/70 3mm 70mm
S-TEX-LT/3/75 3mm 75mm 25m 1 Metre
S-TEX-LT/3/80 3mm 80mm
S-TEX-LT/3/100 3mm 100mm 25m 1 Metre
S-TEX-LT/3/150 3mm 150mm
S-TEX-LT/3/200 3mm 200mm 25m 1 Metre
S-TEX-LT/3/250 3mm 250mm
S-TEX-LT/3/300 3mm 300mm 25m 1 Metre
S-TEX-LT/5/25 5mm 25mm
S-TEX-LT/5/40 5mm 40mm 25m 1 Metre
S-TEX-LT/5/50 5mm 50mm
S-TEX-LT/5/60 5mm 60mm 25m 1 Metre
S-TEX-LT/5/70 5mm 70mm
25m 1 Metre

25m 1 Metre

25m 1 Metre

25m 1 Metre

25m 1 Metre

25m 1 Metre

25m 1 Metre

25m 1 Metre

25m 1 Metre

25m 1 Metre

25m 1 Metre

25m 1 Metre

25m 1 Metre

25m 1 Metre

25m 1 Metre

continued on next page ....

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

Product Code Thickness (mm) Width (mm) Supplied Unit of Sale
S-TEX-LT/5/75 5mm 75mm 25m 1 Metre
S-TEX-LT/5/80 5mm 80mm 25m 1 Metre
S-TEX-LT/5/100 5mm 100mm 25m 1 Metre
S-TEX-LT/5/150 5mm 150mm 25m 1 Metre
S-TEX-LT/5/200 5mm 200mm 25m 1 Metre
S-TEX-LT/5/250 5mm 250mm 25m 1 Metre
S-TEX-LT/5/300 5mm 300mm 25m 1 Metre

Further Information

Material Safety Data Sheet S-TEX Silica Fibre Textiles

Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

BSW Bio Soluble Webbing Tape (Wire Reinforced)

• Special bio soluble (body soluble) yarns developed as a direct replacement for 1000°C
harmful asbestos and ceramic fibre products.

• The bio soluble fibre insulation is rated to 1000°C in situ.
• The wire reinforcement is rated to 1000°C.

Applications

• Can be used to help insulate and therefore control the cooling of castings.
• Excellent insulation of gas and steam turbines.
• Excellent welding curtains.
• Excellent insulation linings.
• Excellent exhaust insulation.
• Excellent radiant heat protection.
• Excellent boiler, furnace and kiln car door seals.

Products

Product Code Reinforcement Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
BSW/15/2/25 Wire 2mm 15mm 25m 1 Coil
BSW/20/2/25 Wire 2mm 20mm 25m 1 Coil
BSW/25/2/25 Wire 2mm 25mm 25m 1 Coil
BSW/30/2/25 Wire 2mm 30mm 25m 1 Coil
BSW/40/2/25 Wire 2mm 40mm 25m 1 Coil
BSW/50/2/25 Wire 2mm 50mm 25m 1 Coil
BSW/60/2/25 Wire 2mm 60mm 25m 1 Coil
BSW/70/2/25 Wire 2mm 70mm 25m 1 Coil
BSW/75/2/25 Wire 2mm 75mm 25m 1 Coil
BSW/80/2/25 Wire 2mm 80mm 25m 1 Coil
BSW/90/2/25 Wire 2mm 90mm 25m 1 Coil
BSW/100/2/25 Wire 2mm 100mm 25m 1 Coil
BSW/120/2/25 Wire 2mm 120mm 25m 1 Coil
BSW/150/2/25 Wire 2mm 150mm 25m 1 Coil
BSW/200/2/25 Wire 2mm 200mm 25m 1 Coil
BSW/250/2/25 Wire 2mm 250mm 25m 1 Coil
BSW/300/2/25 Wire 2mm 300mm 25m 1 Coil
BSW/15/3/25 Wire 3mm 15mm 25m 1 Coil
BSW/20/3/25 Wire 3mm 20mm 25m 1 Coil
BSW/25/3/25 Wire 3mm 25mm 25m 1 Coil
BSW/30/3/25 Wire 3mm 30mm 25m 1 Coil
BSW/40/3/25 Wire 3mm 40mm 25m 1 Coil
BSW/50/3/25 Wire 3mm 50mm 25m 1 Coil
BSW/60/3/25 Wire 3mm 60mm 25m 1 Coil
BSW/70/3/25 Wire 3mm 70mm 25m 1 Coil
BSW/75/3/25 Wire 3mm 75mm 25m 1 Coil
BSW/80/3/25 Wire 3mm 80mm 25m 1 Coil
BSW/90/3/25 Wire 3mm 90mm 25m 1 Coil

UK Office continued on next page ....
Tel: 0161 367 1370
Email: [email protected] Australia Office
Tel: 04 0375 3944
Email: [email protected]

Product Code Reinforcement Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
BSW/100/3/25 Wire 3mm 100mm 25m 1 Coil
BSW/120/3/25 Wire 3mm 120mm 25m 1 Coil
BSW/150/3/25 Wire 3mm 150mm 25m 1 Coil
BSW/200/3/25 Wire 3mm 200mm 25m 1 Coil
BSW/250/3/25 Wire 3mm 250mm 25m 1 Coil
BSW/300/3/25 Wire 3mm 300mm 25m 1 Coil
BSW/15/5/25 Wire 5mm 15mm 25m 1 Coil
BSW/20/5/25 Wire 5mm 20mm 25m 1 Coil
BSW/25/5/25 Wire 5mm 25mm 25m 1 Coil
BSW/30/5/25 Wire 5mm 30mm 25m 1 Coil
BSW/40/5/25 Wire 5mm 40mm 25m 1 Coil
BSW/50/5/25 Wire 5mm 50mm 25m 1 Coil
BSW/60/5/25 Wire 5mm 60mm 25m 1 Coil
BSW/70/5/25 Wire 5mm 70mm 25m 1 Coil
BSW/75/5/25 Wire 5mm 75mm 25m 1 Coil
BSW/80/5/25 Wire 5mm 80mm 25m 1 Coil
BSW/90/5/25 Wire 5mm 90mm 25m 1 Coil
BSW/100/5/25 Wire 5mm 100mm 25m 1 Coil
BSW/120/5/25 Wire 5mm 120mm 25m 1 Coil
BSW/150/5/25 Wire 5mm 150mm 25m 1 Coil
BSW/200/5/25 Wire 5mm 200mm 25m 1 Coil
BSW/250/5/25 Wire 5mm 250mm 25m 1 Coil
BSW/300/5/25 Wire 5mm 300mm 25m 1 Coil

Further Information

Material Safety Data Sheet Bio Soluble Fibre Textiles

Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

Bio Soluble Ladder Tape (Wire Reinforced) 1000°C

• Special bio soluble (body soluble) yarns developed as a direct replacement
for harmful asbestos and ceramic fibre products.

• The bio soluble fibre insulation is rated to 1000°C in situ.
• The wire reinforcement is rated to 1000°C.

Applications

• Central warp yarns have been removed to create a ladder section to enable
application over bolts suitable for boiler, furnace and kiln car door seals.

Products

Product Code Reinforcement Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
BSL/15/2/25 Wire 2mm 15mm 25m 1 Coil
BSL/20/2/25 Wire 2mm 20mm 25m 1 Coil
BSL/25/2/25 Wire 2mm 25mm 25m 1 Coil
BSL/30/2/25 Wire 2mm 30mm 25m 1 Coil
BSL/40/2/25 Wire 2mm 40mm 25m 1 Coil
BSL/50/2/25 Wire 2mm 50mm 25m 1 Coil
BSL/60/2/25 Wire 2mm 60mm 25m 1 Coil
BSL/70/2/25 Wire 2mm 70mm 25m 1 Coil
BSL/75/2/25 Wire 2mm 75mm 25m 1 Coil
BSL/80/2/25 Wire 2mm 80mm 25m 1 Coil
BSL/90/2/25 Wire 2mm 90mm 25m 1 Coil
BSL/100/2/25 Wire 2mm 100mm 25m 1 Coil
BSL/120/2/25 Wire 2mm 120mm 25m 1 Coil
BSL/150/2/25 Wire 2mm 150mm 25m 1 Coil
BSL/200/2/25 Wire 2mm 200mm 25m 1 Coil
BSL/250/2/25 Wire 2mm 250mm 25m 1 Coil
BSL/300/2/25 Wire 2mm 300mm 25m 1 Coil
BSL/15/3/25 Wire 3mm 15mm 25m 1 Coil
BSL/20/3/25 Wire 3mm 20mm 25m 1 Coil
BSL/25/3/25 Wire 3mm 25mm 25m 1 Coil
BSL/30/3/25 Wire 3mm 30mm 25m 1 Coil
BSL/40/3/25 Wire 3mm 40mm 25m 1 Coil
BSL/50/3/25 Wire 3mm 50mm 25m 1 Coil
BSL/60/3/25 Wire 3mm 60mm 25m 1 Coil
BSL/70/3/25 Wire 3mm 70mm 25m 1 Coil
BSL/75/3/25 Wire 3mm 75mm 25m 1 Coil
BSL/80/3/25 Wire 3mm 80mm 25m 1 Coil
BSL/90/3/25 Wire 3mm 90mm 25m 1 Coil
BSL/100/3/25 Wire 3mm 100mm 25m 1 Coil
BSL/120/3/25 Wire 3mm 120mm 25m 1 Coil
BSL/150/3/25 Wire 3mm 150mm 25m 1 Coil
BSL/200/3/25 Wire 3mm 200mm 25m 1 Coil

UK Office continued on next page ....
Tel: 0161 367 1370
Email: [email protected] Australia Office
Tel: 04 0375 3944
Email: [email protected]

Product Code Reinforcement Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
BSL/250/3/25 Wire 3mm 250mm 25m 1 Coil
BSL/300/3/25 Wire 3mm 300mm 25m 1 Coil
BSL/15/5/25 Wire 3mm 15mm 25m 1 Coil
BSL/20/5/25 Wire 5mm 20mm 25m 1 Coil
BSL/25/5/25 Wire 5mm 25mm 25m 1 Coil
BSL/30/5/25 Wire 5mm 30mm 25m 1 Coil
BSL/40/5/25 Wire 5mm 40mm 25m 1 Coil
BSL/50/5/25 Wire 5mm 50mm 25m 1 Coil
BSL/60/5/25 Wire 5mm 60mm 25m 1 Coil
BSL/70/5/25 Wire 5mm 70mm 25m 1 Coil
BSL/75/5/25 Wire 5mm 75mm 25m 1 Coil
BSL/80/5/25 Wire 5mm 80mm 25m 1 Coil
BSL/90/5/25 Wire 5mm 90mm 25m 1 Coil
BSL/100/5/25 Wire 5mm 100mm 25m 1 Coil
BSL/120/5/25 Wire 5mm 120mm 25m 1 Coil
BSL/150/5/25 Wire 5mm 150mm 25m 1 Coil
BSL/200/5/25 Wire 5mm 200mm 25m 1 Coil
BSL/250/5/25 Wire 5mm 250mm 25m 1 Coil
BSL/300/5/25 Wire 5mm 300mm 25m 1 Coil

Further Information

Material Safety Data Sheet Bio Soluble Fibre Textiles

Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

BSW Bio Soluble Webbing Tape (Glass Reinforced)

• Special bio soluble (body soluble) yarns developed as a direct replacement for 550°C /
harmful asbestos and ceramic fibre products. 1000°C

• The bio soluble fibre insulation is rated to 1000°C in situ.
• The glass reinforcement is rated to 550°C.
•

Applications

• Can be used to help insulate and therefore control the cooling of castings.
• Excellent insulation of gas and steam turbines.
• Excellent welding curtains.
• Excellent insulation linings.
• Excellent exhaust insulation.
• Excellent radiant heat protection.
• Excellent boiler, furnace and kiln car door seals.

Products

Product Code Reinforcement Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
BSW/G/15/2/25 Glass 2mm 15mm 25m 1 Coil
BSW/G/20/2/25 Glass 2mm 20mm 25m 1 Coil
BSW/G/25/2/25 Glass 2mm 25mm 25m 1 Coil
BSW/G/30/2/25 Glass 2mm 30mm 25m 1 Coil
BSW/G/40/2/25 Glass 2mm 40mm 25m 1 Coil
BSW/G/50/2/25 Glass 2mm 50mm 25m 1 Coil
BSW/G/60/2/25 Glass 2mm 60mm 25m 1 Coil
BSW/G/70/2/25 Glass 2mm 70mm 25m 1 Coil
BSW/G/75/2/25 Glass 2mm 75mm 25m 1 Coil
BSW/G/80/2/25 Glass 2mm 80mm 25m 1 Coil
BSW/G/90/2/25 Glass 2mm 90mm 25m 1 Coil
BSW/G/100/2/25 Glass 2mm 100mm 25m 1 Coil
BSW/G/120/2/25 Glass 2mm 120mm 25m 1 Coil
BSW/G/150/2/25 Glass 2mm 150mm 25m 1 Coil
BSW/G/200/2/25 Glass 2mm 200mm 25m 1 Coil
BSW/G/250/2/25 Glass 2mm 250mm 25m 1 Coil
BSW/G/300/2/25 Glass 2mm 300mm 25m 1 Coil
BSW/G/15/3/25 Glass 3mm 15mm 25m 1 Coil
BSW/G/20/3/25 Glass 3mm 20mm 25m 1 Coil
BSW/G/25/3/25 Glass 3mm 25mm 25m 1 Coil
BSW/G/30/3/25 Glass 3mm 30mm 25m 1 Coil
BSW/G/40/3/25 Glass 3mm 40mm 25m 1 Coil
BSW/G/50/3/25 Glass 3mm 50mm 25m 1 Coil
BSW/G/60/3/25 Glass 3mm 60mm 25m 1 Coil
BSW/G/70/3/25 Glass 3mm 70mm 25m 1 Coil
BSW/G/75/3/25 Glass 3mm 75mm 25m 1 Coil
BSW/G/80/3/25 Glass 3mm 80mm 25m 1 Coil
BSW/G/90/3/25 Glass 3mm 90mm 25m 1 Coil

UK Office continued on next page ....
Tel: 0161 367 1370
Email: [email protected] Australia Office
Tel: 04 0375 3944
Email: [email protected]

Product Code Reinforcement Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
BSW/G/100/3/25 Glass 3mm 100mm 25m 1 Coil
BSW/G/120/3/25 Glass 3mm 120mm 25m 1 Coil
BSW/G/150/3/25 Glass 3mm 150mm 25m 1 Coil
BSW/G/200/3/25 Glass 3mm 200mm 25m 1 Coil
BSW/G/250/3/25 Glass 3mm 250mm 25m 1 Coil
BSW/G/300/3/25 Glass 3mm 300mm 25m 1 Coil
BSW/G/15/5/25 Glass 5mm 15mm 25m 1 Coil
BSW/G/20/5/25 Glass 5mm 20mm 25m 1 Coil
BSW/G/25/5/25 Glass 5mm 25mm 25m 1 Coil
BSW/G/30/5/25 Glass 5mm 30mm 25m 1 Coil
BSW/G/40/5/25 Glass 5mm 40mm 25m 1 Coil
BSW/G/50/5/25 Glass 5mm 50mm 25m 1 Coil
BSW/G/60/5/25 Glass 5mm 60mm 25m 1 Coil
BSW/G/70/5/25 Glass 5mm 70mm 25m 1 Coil
BSW/G/75/5/25 Glass 5mm 75mm 25m 1 Coil
BSW/G/80/5/25 Glass 5mm 80mm 25m 1 Coil
BSW/G/90/5/25 Glass 5mm 90mm 25m 1 Coil
BSW/G/100/5/25 Glass 5mm 100mm 25m 1 Coil
BSW/G/120/5/25 Glass 5mm 120mm 25m 1 Coil
BSW/G/150/5/25 Glass 5mm 150mm 25m 1 Coil
BSW/G/200/5/25 Glass 5mm 200mm 25m 1 Coil
BSW/G/250/5/25 Glass 5mm 250mm 25m 1 Coil
BSW/G/300/5/25 Glass 5mm 300mm 25m 1 Coil

Further Information

Material Safety Data Sheet Bio Soluble Fibre Textiles

Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

Bio Soluble Ladder Tape (Glass Reinforced) 550°C /
1000°C
• Special bio soluble (body soluble) yarns developed as a direct replacement
for harmful asbestos and ceramic fibre products.

• The bio soluble fibre insulation is rated to 1000°C in situ.
• The glass reinforcement is rated to 550°C.

Applications

• Central warp yarns have been removed to create a ladder section to enable
application over bolts suitable for boiler, furnace and kiln car door seals.

Products

Product Code Reinforcement Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
BSL/G/15/2/25 Glass 2mm 15mm 25m 1 Coil
BSL/G/20/2/25 Glass 2mm 20mm 25m 1 Coil
BSL/G/25/2/25 Glass 2mm 25mm 25m 1 Coil
BSL/G/30/2/25 Glass 2mm 30mm 25m 1 Coil
BSL/G/40/2/25 Glass 2mm 40mm 25m 1 Coil
BSL/G/50/2/25 Glass 2mm 50mm 25m 1 Coil
BSL/G/60/2/25 Glass 2mm 60mm 25m 1 Coil
BSL/G/70/2/25 Glass 2mm 70mm 25m 1 Coil
BSL/G/75/2/25 Glass 2mm 75mm 25m 1 Coil
BSL/G/80/2/25 Glass 2mm 80mm 25m 1 Coil
BSL/G/90/2/25 Glass 2mm 90mm 25m 1 Coil
BSL/G/100/2/25 Glass 2mm 100mm 25m 1 Coil
BSL/G/120/2/25 Glass 2mm 120mm 25m 1 Coil
BSL/G/150/2/25 Glass 2mm 150mm 25m 1 Coil
BSL/G/200/2/25 Glass 2mm 200mm 25m 1 Coil
BSL/G/250/2/25 Glass 2mm 250mm 25m 1 Coil
BSL/G/300/2/25 Glass 2mm 300mm 25m 1 Coil
BSL/G/15/3/25 Glass 3mm 15mm 25m 1 Coil
BSL/G/20/3/25 Glass 3mm 20mm 25m 1 Coil
BSL/G/25/3/25 Glass 3mm 25mm 25m 1 Coil
BSL/G/30/3/25 Glass 3mm 30mm 25m 1 Coil
BSL/G/40/3/25 Glass 3mm 40mm 25m 1 Coil
BSL/G/50/3/25 Glass 3mm 50mm 25m 1 Coil
BSL/G/60/3/25 Glass 3mm 60mm 25m 1 Coil
BSL/G/70/3/25 Glass 3mm 70mm 25m 1 Coil
BSL/G/75/3/25 Glass 3mm 75mm 25m 1 Coil
BSL/G/80/3/25 Glass 3mm 80mm 25m 1 Coil
BSL/G/90/3/25 Glass 3mm 90mm 25m 1 Coil
BSL/G/100/3/25 Glass 3mm 100mm 25m 1 Coil
BSL/G/120/3/25 Glass 3mm 120mm 25m 1 Coil
BSL/G/150/3/25 Glass 3mm 150mm 25m 1 Coil
BSL/200/3/25 Glass 3mm 200mm 25m 1 Coil

UK Office continued on next page ....
Tel: 0161 367 1370
Email: [email protected] Australia Office
Tel: 04 0375 3944
Email: [email protected]

Product Code Reinforcement Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
BSL/G/250/3/25 Glass 3mm 250mm 25m 1 Coil
BSL/G/300/3/25 Glass 3mm 300mm 25m 1 Coil
BSL/G/15/5/25 Glass 3mm 15mm 25m 1 Coil
BSL/G/20/5/25 Glass 5mm 20mm 25m 1 Coil
BSL/G/25/5/25 Glass 5mm 25mm 25m 1 Coil
BSL/G/30/5/25 Glass 5mm 30mm 25m 1 Coil
BSL/G/40/5/25 Glass 5mm 40mm 25m 1 Coil
BSL/G/50/5/25 Glass 5mm 50mm 25m 1 Coil
BSL/G/60/5/25 Glass 5mm 60mm 25m 1 Coil
BSL/G/70/5/25 Glass 5mm 70mm 25m 1 Coil
BSL/G/75/5/25 Glass 5mm 75mm 25m 1 Coil
BSL/G/80/5/25 Glass 5mm 80mm 25m 1 Coil
BSL/G/90/5/25 Glass 5mm 90mm 25m 1 Coil
BSL/G/100/5/25 Glass 5mm 100mm 25m 1 Coil
BSL/G/120/5/25 Glass 5mm 120mm 25m 1 Coil
BSL/G/150/5/25 Glass 5mm 150mm 25m 1 Coil
BSL/G/200/5/25 Glass 5mm 200mm 25m 1 Coil
BSL/G/250/5/25 Glass 5mm 250mm 25m 1 Coil
BSL/G/300/5/25 Glass 5mm 300mm 25m 1 Coil

Further Information

Material Safety Data Sheet Bio Soluble Fibre Textiles

Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

Ceramic Fibre Webbing Tape (Wire Reinforced) 1000°C /
1260°C
• Refractory ceramic fibre webbings are manufactured from blown alumina-silicate
fibre yarn which has been blended from high purity alumina and silica.

• A combination of physical and refractory properties makes this an outstanding
material for use in high temperature applications.

• They form a direct, asbestos free, substitute for the equivalent asbestos textile
products.

• The ceramic fibre insulation is rated to 1260°C in situ.
• The wire reinforcement is rated to 1000°C.

Applications

• Excellent Insulation of gas and steam turbines.
• Excellent Welding curtains.
• Excellent insulation linings.
• Excellent radiant heat protection.
• Excellent boiler, furnace and kiln car door seals.
N.B. Tape is normally supplied loomstate. In the manufacture of ceramic yarn a certain small percentage of organic binder is
used to aid spinning. This can sometimes cause “flashing” at high temperatures. This can be avoided if the tape is heat cleaned
prior to use or if the organic impurities in the tape can be allowed to burn off in situ on application for the initial period.

In light of health and safety concerns for refractory ceramic fibre we strongly urge our customers to
consider our S-TEX Silica, Silex Silca, HT Modified Glass or Bio Soluble alternatives.

Products

Product Code Reinforcement Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
CT1152/15/30 Wire 2mm 15mm 30m 1 Coil
CT1152/20/30 Wire 2mm 20mm 30m 1 Coil
CT1152/25/30 Wire 2mm 25mm 30m 1 Coil
CT1152/30/30 Wire 2mm 30mm 30m 1 Coil
CT1152/40/30 Wire 2mm 40mm 30m 1 Coil
CT1152/50/30 Wire 2mm 50mm 30m 1 Coil
CT1152/60/30 Wire 2mm 60mm 30m 1 Coil
CT1152/70/30 Wire 2mm 70mm 30m 1 Coil
CT1152/75/30 Wire 2mm 75mm 30m 1 Coil
CT1152/80/30 Wire 2mm 80mm 30m 1 Coil
CT1152/90/30 Wire 2mm 90mm 30m 1 Coil
CT1152/100/30 Wire 2mm 100mm 30m 1 Coil
CT1152/120/30 Wire 2mm 120mm 30m 1 Coil
CT1152/150/30 Wire 2mm 150mm 30m 1 Coil
CT1152/200/30 Wire 2mm 200mm 30m 1 Coil
CT1152/250/30 Wire 2mm 250mm 30m 1 Coil
CT1152/300/30 Wire 2mm 300mm 30m 1 Coil
CT1179/015/30 Wire 3mm 15mm 30m 1 Coil
CT1179/020/30 Wire 3mm 20mm 30m 1 Coil
CT1179/025/30 Wire 3mm 25mm 30m 1 Coil
CT1179/030/30 Wire 3mm 30mm 30m 1 Coil
CT1179/040/30 Wire 3mm 40mm 30m 1 Coil
CT1179/050/30 Wire 3mm 50mm 30m 1 Coil
Australia Officceontinued on next page ....
UK Office Tel: 04 0375 3944
Tel: 0161 367 1370 Email: [email protected]
Email: [email protected]

Product Code Reinforcement Thickness (mm) Width (mm) Coil Length (m) Unit of Sale

CT1179/060/30 Wire 3mm 60mm 30m 1 Coil

CT1179/070/30 Wire 3mm 70mm 30m 1 Coil

CT1179/075/30 Wire 3mm 75mm 30m 1 Coil

CT1179/080/30 Wire 3mm 80mm 30m 1 Coil

CT1179/090/30 Wire 3mm 90mm 30m 1 Coil

CT1179/100/30 Wire 3mm 100mm 30m 1 Coil

CT1179/120/30 Wire 3mm 120mm 30m 1 Coil

CT1179/150/30 Wire 3mm 150mm 30m 1 Coil

CT1179/200/30 Wire 3mm 200mm 30m 1 Coil

CT1179/250/30 Wire 3mm 250mm 30m 1 Coil

CT1179/300/30 Wire 3mm 300mm 30m 1 Coil

CT1191/020/30 Wire 6mm 20mm 30m 1 Coil

CT1191/025/30 Wire 6mm 25mm 30m 1 Coil

CT1191/030/30 Wire 6mm 30mm 30m 1 Coil

CT1191/040/30 Wire 6mm 40mm 30m 1 Coil

CT1191/050/30 Wire 6mm 50mm 30m 1 Coil

CT1191/060/30 Wire 6mm 60mm 30m 1 Coil

CT1191/070/30 Wire 6mm 70mm 30m 1 Coil

CT1191/075/30 Wire 6mm 75mm 30m 1 Coil

CT1191/080/30 Wire 6mm 80mm 30m 1 Coil

CT1191/090/30 Wire 6mm 90mm 30m 1 Coil

CT1191/100/30 Wire 6mm 100mm 30m 1 Coil

CT1191/120/30 Wire 6mm 120mm 30m 1 Coil

CT1191/150/30 Wire 6mm 150mm 30m 1 Coil

CT1191/200/30 Wire 6mm 200mm 30m 1 Coil

CT1191/250/30 Wire 6mm 250mm 30m 1 Coil

CT1191/300/30 Wire 6mm 300mm 30m 1 Coil

Important Note: Refractory ceramic fibre dust has been classified under directive 97/96/ EC among category 2

carcinogens. Please consult MSDS for more information.

Further Information

Material Safety Data Sheet Refractory Ceramic Fibre Textiles

Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

Ceramic Fibre Ladder Tape (Wire Reinforced) 1000°C /
1260°C
• Refractory ceramic fibre webbings are manufactured from blown alumina-
silicate fibre yarn which has been blended from high purity alumina and silica.

• A combination of physical and refractory properties makes this an outstanding
material for use in high temperature applications.

• They form a direct, asbestos free, substitute for the equivalent asbestos textile
products.

• The ceramic fibre insulation is rated to 1260°C in situ.
• The wire reinforcement is rated to 1000°C.

Applications

• Central warp yarns have been removed to create a ladder section to enable application over bolts suitable for boiler,
furnace and kiln car door seals.

N.B. Tape is normally supplied loomstate. In the manufacture of ceramic yarn a certain small percentage of organic binder is
used to aid spinning. This can sometimes cause “flashing” at high temperatures. This can be avoided if the tape is heat cleaned
prior to use or if the organic impurities in the tape can be allowed to burn off in situ on application for the initial period.

In light of health and safety concerns for refractory ceramic fibre we strongly urge our customers to
consider our S-TEX Silica, Silex Silca, HT Modified Glass or Bio Soluble alternatives.

Products

Product Code Reinforcement Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
CL1149/15/30 Wire 2mm 15mm 30m 1 Coil
CL1149/20/30 Wire 2mm 20mm 30m 1 Coil
CL1149/25/30 Wire 2mm 25mm 30m 1 Coil
CL1149/30/30 Wire 2mm 30mm 30m 1 Coil
CL1149/40/30 Wire 2mm 40mm 30m 1 Coil
CL1149/50/30 Wire 2mm 50mm 30m 1 Coil
CL1149/60/30 Wire 2mm 60mm 30m 1 Coil
CL1149/70/30 Wire 2mm 70mm 30m 1 Coil
CL1149/75/30 Wire 2mm 75mm 30m 1 Coil
CL1149/80/30 Wire 2mm 80mm 30m 1 Coil
CL1149/90/30 Wire 2mm 90mm 30m 1 Coil
CL1149/100/30 Wire 2mm 100mm 30m 1 Coil
CL1149/120/30 Wire 2mm 120mm 30m 1 Coil
CL1149/150/30 Wire 2mm 150mm 30m 1 Coil
CL1149/200/30 Wire 2mm 200mm 30m 1 Coil
CL1149/250/30 Wire 2mm 250mm 30m 1 Coil
CL1149/300/30 Wire 2mm 300mm 30m 1 Coil
CL1178/015/30 Wire 3mm 15mm 30m 1 Coil
CL1178/025/30 Wire 3mm 25mm 30m 1 Coil
CL1178/030/30 Wire 3mm 30mm 30m 1 Coil
CL1178/040/30 Wire 3mm 40mm 30m 1 Coil
CL1178/050/30 Wire 3mm 50mm 30m 1 Coil
CL1178/060/30 Wire 3mm 60mm 30m 1 Coil
CL1178/070/30 Wire 3mm 70mm 30m 1 Coil
CL1178/075/30 Wire 3mm 75mm 30m 1 Coil
Australia Officceontinued on next page ....
UK Office Tel: 04 0375 3944
Tel: 0161 367 1370 Email: [email protected]
Email: [email protected]

Product Code Reinforcement Thickness (mm) Width (mm) Coil Length (m) Unit of Sale

CL1178/080/30 Wire 3mm 80mm 30m 1 Coil

CL1178/090/30 Wire 3mm 90mm 30m 1 Coil

CL1178/100/30 Wire 3mm 100mm 30m 1 Coil

CL1178/120/30 Wire 3mm 120mm 30m 1 Coil

CL1178/150/30 Wire 3mm 150mm 30m 1 Coil

CL1178/200/30 Wire 3mm 200mm 30m 1 Coil

CL1178/250/30 Wire 3mm 250mm 30m 1 Coil

CL1178/300/30 Wire 3mm 300mm 30m 1 Coil

CL1285/020/30 Wire 6mm 20mm 30m 1 Coil

CL1285/025/30 Wire 6mm 25mm 30m 1 Coil

CL1285/030/30 Wire 6mm 30mm 30m 1 Coil

CL1285/040/30 Wire 6mm 40mm 30m 1 Coil

CL1285/050/30 Wire 6mm 50mm 30m 1 Coil

CL1285/060/30 Wire 6mm 60mm 30m 1 Coil

CL1285/070/30 Wire 6mm 70mm 30m 1 Coil

CL1285/075/30 Wire 6mm 75mm 30m 1 Coil

CL1285/080/30 Wire 6mm 80mm 30m 1 Coil

CL1285/090/30 Wire 6mm 90mm 30m 1 Coil

CL1285/100/30 Wire 6mm 100mm 30m 1 Coil

CL1285/120/30 Wire 6mm 120mm 30m 1 Coil

CL1285/150/30 Wire 6mm 150mm 30m 1 Coil

CL1285/200/30 Wire 6mm 200mm 30m 1 Coil

CL1285/250/30 Wire 6mm 250mm 30m 1 Coil

CL1285/300/30 Wire 6mm 300mm 30m 1 Coil

Important Note: Refractory ceramic fibre dust has been classified under directive 97/96/ EC among category 2
carcinogens. Please consult MSDS for more information.

Further Information

Material Safety Data Sheet Refractory Ceramic Fibre Textiles

Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

Ceramic Fibre Webbing Tape (Glass Reinforced) 550°C /
1260°C
• Refractory ceramic fibre webbings are manufactured from blown alumina-silicate
fibre yarn which has been blended from high purity alumina and silica.

• A combination of physical and refractory properties makes this an outstanding
material for use in high temperature applications.

• They form a direct, asbestos free, substitute for the equivalent asbestos textile
products.

• The ceramic fibre insulation is rated to 1260°C in situ.
• The glass reinforcement is rated to 550°C.

Applications

• Excellent Insulation of gas and steam turbines.
• Excellent Welding curtains.
• Excellent insulation linings.
• Excellent radiant heat protection.
• Excellent boiler, furnace and kiln car door seals.

N.B. Tape is normally supplied loomstate. In the manufacture of ceramic yarn a certain small percentage of organic binder is
used to aid spinning. This can sometimes cause “flashing” at high temperatures. This can be avoided if the tape is heat cleaned
prior to use or if the organic impurities in the tape can be allowed to burn off in situ on application for the initial period.

In light of health and safety concerns for refractory ceramic fibre we strongly urge our customers to
consider our S-TEX Silica, Silex Silca, HT Modified Glass or Bio Soluble alternatives.

Products

Product Code Reinforcement Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
CT1152/G/15/30 Glass 2mm 15mm 30m 1 Coil
CT1152/G/20/30 Glass 2mm 20mm 30m 1 Coil
CT1152/G/25/30 Glass 2mm 25mm 30m 1 Coil
CT1152/G/30/30 Glass 2mm 30mm 30m 1 Coil
CT1152/G/40/30 Glass 2mm 40mm 30m 1 Coil
CT1152/G/50/30 Glass 2mm 50mm 30m 1 Coil
CT1152/G/60/30 Glass 2mm 60mm 30m 1 Coil
CT1152/G/70/30 Glass 2mm 70mm 30m 1 Coil
CT1152/G/75/30 Glass 2mm 75mm 30m 1 Coil
CT1152/G/80/30 Glass 2mm 80mm 30m 1 Coil
CT1152/G/90/30 Glass 2mm 90mm 30m 1 Coil
CT1152/G/100/30 Glass 2mm 100mm 30m 1 Coil
CT1152/G/120/30 Glass 2mm 120mm 30m 1 Coil
CT1152/G/150/30 Glass 2mm 150mm 30m 1 Coil
CT1152/G/200/30 Glass 2mm 200mm 30m 1 Coil
CT1152/G/250/30 Glass 2mm 250mm 30m 1 Coil
CT1152/G/300/30 Glass 2mm 300mm 30m 1 Coil
CT1179/G/015/30 Glass 3mm 15mm 30m 1 Coil
CT1179/G/025/30 Glass 3mm 25mm 30m 1 Coil
CT1179/G/030/30 Glass 3mm 30mm 30m 1 Coil
CT1179/G/040/30 Glass 3mm 40mm 30m 1 Coil
CT1179/G/050/30 Glass 3mm 50mm 30m 1 Coil

UK Office continued on next page ....
Tel: 0161 367 1370
Email: [email protected] Australia Office
Tel: 04 0375 3944
Email: [email protected]

Product Code Reinforcement Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
CT1179/G/060/30 Glass 3mm 60mm 30m 1 Coil
CT1179/G/075/30 Glass 3mm 75mm 30m 1 Coil
CT1179/G/100/30 Glass 3mm 100mm 30m 1 Coil
CT1179/G/120/30 Glass 3mm 120mm 30m 1 Coil
CT1179/G/150/30 Glass 3mm 150mm 30m 1 Coil
CT1179/G/200/30 Glass 3mm 200mm 30m 1 Coil
CT1179/G/250/30 Glass 3mm 250mm 30m 1 Coil
CT1179/G/300/30 Glass 3mm 300mm 30m 1 Coil
CT1179/G/020/30 Glass 6mm 20mm 30m 1 Coil
CT1191/G/025/30 Glass 6mm 25mm 30m 1 Coil
CT1191/G/030/30 Glass 6mm 30mm 30m 1 Coil
CT1191/G/040/30 Glass 6mm 40mm 30m 1 Coil
CT1191/G/050/30 Glass 6mm 50mm 30m 1 Coil
CT1191/G/060/30 Glass 6mm 60mm 30m 1 Coil
CT1191/G/070/30 Glass 6mm 70mm 30m 1 Coil
CT1191/G/075/30 Glass 6mm 75mm 30m 1 Coil
CT1191/G/080/30 Glass 6mm 80mm 30m 1 Coil
CT1191/G/090/30 Glass 6mm 90mm 30m 1 Coil
CT1191/G/100/30 Glass 6mm 100mm 30m 1 Coil
CT1191/G/120/30 Glass 6mm 120mm 30m 1 Coil
CT1191/G/150/30 Glass 6mm 150mm 30m 1 Coil
CT1191/G/200/30 Glass 6mm 200mm 30m 1 Coil
CT1191/G/250/30 Glass 6mm 250mm 30m 1 Coil
CT1191/G/300/30 Glass 6mm 300mm 30m 1 Coil

Important Note: Refractory ceramic fibre dust has been classified under directive 97/96/ EC among category 2
carcinogens. Please consult MSDS for more information.

Further Information

Material Safety Data Sheet Refractory Ceramic Fibre Textiles

Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

Ceramic Fibre Ladder Tape (Glass Reinforced) 550°C /
1260°C
• Refractory ceramic fibre webbings are manufactured from blown alumina-
silicate fibre yarn which has been blended from high purity alumina and silica.

• A combination of physical and refractory properties makes this an outstanding
material for use in high temperature applications.

• They form a direct, asbestos free, substitute for the equivalent asbestos textile
products.

• The ceramic fibre insulation is rated to 1260°C in situ.
• The glass reinforcement is rated to 550°C. .

Applications

• Central warp yarns have been removed to create a ladder section to enable application over bolts suitable for boiler,
furnace and kiln car door seals.

N.B. Tape is normally supplied loomstate. In the manufacture of ceramic yarn a certain small percentage of organic binder is
used to aid spinning. This can sometimes cause “flashing” at high temperatures. This can be avoided if the tape is heat cleaned
prior to use or if the organic impurities in the tape can be allowed to burn off in situ on application for the initial period.

In light of health and safety concerns for refractory ceramic fibre we strongly urge our customers to
consider our S-TEX Silica, Silex Silca, HT Modified Glass or Bio Soluble alternatives.

Products

Product Code Reinforcement Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
CL1149/G/15/30 Glass 2mm 15mm 30m 1 Coil
CL1149/G/20/30 Glass 2mm 20mm 30m 1 Coil
CL1149/G/25/30 Glass 2mm 25mm 30m 1 Coil
CL1149/G/30/30 Glass 2mm 30mm 30m 1 Coil
CL1149/G/40/30 Glass 2mm 40mm 30m 1 Coil
CL1149/G/50/30 Glass 2mm 50mm 30m 1 Coil
CL1149/G/60/30 Glass 2mm 60mm 30m 1 Coil
CL1149/G/70/30 Glass 2mm 70mm 30m 1 Coil
CL1149/G/75/30 Glass 2mm 75mm 30m 1 Coil
CL1149/G/80/30 Glass 2mm 80mm 30m 1 Coil
CL1149/G/90/30 Glass 2mm 90mm 30m 1 Coil
CL1149/G/100/30 Glass 2mm 100mm 30m 1 Coil
CL1149/G/120/30 Glass 2mm 120mm 30m 1 Coil
CL1149/G/150/30 Glass 2mm 150mm 30m 1 Coil
CL1149/G/200/30 Glass 2mm 200mm 30m 1 Coil
CL1149/G/250/30 Glass 2mm 250mm 30m 1 Coil
CL1149/G/300/30 Glass 2mm 300mm 30m 1 Coil
CL1178/G/015/30 Glass 3mm 15mm 30m 1 Coil
CL1178/G/025/30 Glass 3mm 25mm 30m 1 Coil
CL1178/G/030/30 Glass 3mm 30mm 30m 1 Coil
CL1178/G/040/30 Glass 3mm 40mm 30m 1 Coil
CL1178/G/050/30 Glass 3mm 50mm 30m 1 Coil
CL1178/G/060/30 Glass 3mm 60mm 30m 1 Coil
CL1178/G/070/30 Glass 3mm 70mm 30m 1 Coil

UK Office continued on next page ....
Tel: 0161 367 1370
Email: [email protected] Australia Office
Tel: 04 0375 3944
Email: [email protected]

Product Code Reinforcement Thickness (mm) Width (mm) Roll Length (m) Unit of Sale

CL1178/G/075/30 Glass 3mm 75mm 30m 1 Coil

CL1178/G/080/30 Glass 3mm 80mm 30m 1 Coil

CL1178/G/090/30 Glass 3mm 90mm 30m 1 Coil

CL1178/G/100/30 Glass 3mm 100mm 30m 1 Coil

CL1178/G/120/30 Glass 3mm 120mm 30m 1 Coil

CL1178/G/150/30 Glass 3mm 150mm 30m 1 Coil

CL1178/G/200/30 Glass 3mm 200mm 30m 1 Coil

CL1178/G/250/30 Glass 3mm 250mm 30m 1 Coil

CL1178/G/300/30 Glass 3mm 300mm 30m 1 Coil

CL1285/G/020/30 Glass 6mm 20mm 30m 1 Coil

CL1285/G/025/30 Glass 6mm 25mm 30m 1 Coil

CL1285/G/030/30 Glass 6mm 30mm 30m 1 Coil

CL1285/G/040/30 Glass 6mm 40mm 30m 1 Coil

CL1285/G/050/30 Glass 6mm 50mm 30m 1 Coil

CL1285/G/050/30 Glass 6mm 60mm 30m 1 Coil

CL1285/G/070/30 Glass 6mm 70mm 30m 1 Coil

CL1285/G/075/30 Glass 6mm 75mm 30m 1 Coil

CL1285/G/080/30 Glass 6mm 80mm 30m 1 Coil

CL1285/G/090/30 Glass 6mm 90mm 30m 1 Coil

CL1285/G/100/30 Glass 6mm 100mm 30m 1 Coil

CL1285/G/120/30 Glass 6mm 120mm 30m 1 Coil

CL1285/G/150/30 Glass 6mm 150mm 30m 1 Coil

CL1285/G/200/30 Glass 6mm 200mm 30m 1 Coil

CL1285/G/250/30 Glass 6mm 250mm 30m 1 Coil

CL1285/G/300/30 Glass 6mm 300mm 30m 1 Coil

Important Note: Refractory ceramic fibre dust has been classified under directive 97/96/ EC among category 2
carcinogens. Please consult MSDS for more information.

Further Information

Material Safety Data Sheet Refractory Ceramic Fibre Textiles

Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

Alumina Silica Tape 1395°C

• ASIL-TEX is a composite fibre of 72% alumina and 28% silica and is generically
known as Alumina Silica Fibre. The product/yarns are produced as a 7 micron
diameter filament and are born free.

• ASIL-TEX suffers almost no loss of mechanical strength at temperatures up to
1200°C and can be used for applications approaching 1395°C.

Applications

• Thermal insulation rings.
• Furnace linings.
• Heat-shielding curtains.
• Thermal insulation sealers or packing materials.
• Thermal insulation covering for thermocouples, cables and wires.
• Roller covers for tempered glass plate manufacturing.
• Filters for molten metals.
• Spacers for heat treatment.
• Abrasives for plastic whetstone insulators around generators and aircraft/rocket

engines.
• Catalyst carriers.
• Electrical and thermal insulators for diesel particulate filter (DPF) systems.
• Insulation and structural materials for cryogenic apparatuses.

Products

Product Code Thickness (mm) Width (mm) Supplied Unit of Sale
ASIL-TEX-T/25/0.3 0.3mm 25mm 1 Metre 1 Metre
ASIL-TEX-T/50/0.32P 0.32mm 50mm 1 Metre 1 Metre
ASIL-TEX-T/50/0.32T 0.32mm 50mm 1 Metre 1 Metre
ASIL-TEX-T/25/1.3 1.3mm 25mm 1 Metre 1 Metre

Further Information

Material Safety Data Sheet Alumina Silica Fibre Textiles

Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

High Performance Silicone Adhesive Backed Glass Tape 180°C

• High Performance Silicone Adhesive Backed Glass Tape is tear and abrasion resistant
with very high temperature resistance.

• Temperature range is -80°C to 180°C.
• 300mm wide by 33m length.

Applications

• Plasma spray masking tape.
• Holding and general insulation of coils and transformers.
• Cable harnessing at high temperatures.
• Interphase insulation.
• Heavy coil banding.
• Slot edge reinforcement.

Products

Product Code Thickness (mm) Width (mm) Coil Length (m) Unit of Sale
300mm 33m 1 Coil
HPGFT/WHITE/300/33 0.165mm 300mm 33m 1 Coil

HPGFT2/WHITE/300/33 0.325mm

Further Information

Material Safety Data Sheet HPGFT MSDS

Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

Gold Shield Foil Tape 260°C /
400°C
• The Gold Shield Foil Tape is made from a lightweight aerospace material.
• This 0.15mm thick foil has a fire resistant pressure sensitive adhesive that

incorporates a fiberglass backing for strength and tear resistance.
• The adhesive meets or exceeds the FAA 12-second vertical burn requirement.
• This gold reflective foil reflects up to 400°C of radiant heat and has a continuous

operating temperature of 260°C.
• It will break down at 450°C of continuous radiant heat.
• There is up to a 22°C gradient temperature drop across the 6mm thick foil dur-

ing normal operating temperatures.
• Key benefits: can easily be cut and configured to each chassis style; easy to

repair, install and remove since it adheres to itself.

Applications

• Applications include but are not limited to: fire walls, engine covers, side pods, suspension, under trays/floors, bulk
heads and many more.

Products

Product Code Width (mm) Thickness (mm) Length (mm) Colour Unit of Sale
GOLDST/38/4.5 38mm 0.15mm 4.5mm Gold 1 Coil
GOLDST/38/9.1 38mm 0.15mm 9.1mm Gold 1 Coil
GOLDST/50/4.5 50mm 0.15mm 4.5mm Gold 1 Coil
GOLDST/50/9.1 50mm 0.15mm 9.1mm Gold 1 Coil

Further Information

Material Safety Data Sheet Gold Shield MSDS

Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

Magmashield Tape (Kapton® Basalt Fibre Composite) 150°C /
400°C
• By integrating aerospace grade polyimide technology with our in house
extreme temperature volcanic fibre matrix, Textile Technologies have developed
a product which is not only superior in performance but boasts a carbon fibre
appearance.

• It reflects up to 80% radiant heat; it withstands up to 400°C continuous
temperatures. Short term to 450°C.

• It is lightweight and easy to apply with a special high temp adhesive backing.
• Not to be applied to exhaust system.
• Adhesive backing applied to cold surface is rated to 150°C.

Applications

• Excellent for air intakes, firewalls, motorbike fairings and any component needing protection from heat.

Products Width (mm) Thickness (mm) Length (m) Unit of Sale
40mm 1mm 10m 1 Coil
Product Code 40mm 1mm 2.5m 1 Coil
MST/040/010 40mm 1mm 5m 1 Coil
MST/040/2.5
MST/040/05

Further Information

Material Safety Data Sheet Kapton® Polyimide Film MSDS / Basalt Fibre MSDS

Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.

Product in Application

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

SHIELDTEX780 - Heat Shield Tape (Adhesive Backed) 250°C /

• SHIELDTEX/780AB/100/3 differs from standard reflective heat shield tape in a 550°C

number of ways.

• It has a higher than average 20µ micron aluminium foil face making it extremely

durable and resilient even after repeated manipulation during fabrication.

• The adhesive used to laminate the foil to the glass is a special HT silicone rather

than acrylic, enabling the temperature resistance to increase from 180°C to

250°C. E Glass base cloth resistant to 550°C.

• This in turn greatly reduces the chance of the foil cracking or delaminating from

the glass substrate.

• Furthermore, unlike standard heat shield tape, the base glass fabric is lightly

impregnated with a black flame resistant PU coating to prevent fray when CNC

machine cutting and fabrication.

• This ensures a clean cut and a professional finish.

• Tested to DIN EN ISO 6491 B.

• A high temperature adhesive backing has been applied so the product can be adhered to clean surfaces.

• This must not be adhered to hot surfaces e.g. exhausts as the adhesive would fail or ignite. It is only designed for

“radiant heat” deflection.

Applications

• Manufactured / fabricated products to protect components from the damaging effects of radiant heat.

Products

Product Code Continuous Filament Weave Weight Width Thickness Unit of Sale Coil
SHIELDTEX/780AB/100/3 Or Textured (g/m²) (mm) (mm) Length

Textured Plain 780 100mm 0.8mm 1 Coil 3m

Further Information

Material Safety Data Sheet SHIELDTEX/780AB/100/3 MSDS

Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

Natural Rubber Proofed E Glass Tape 240°C

• Textile Technologies are able to apply natural rubber to a range of different E
glass cloths and slit into tape.

• The natural rubber is supplied uncured and fully interleaved.
• Excellent gasket and sealing solution capable of withstanding continuous

operating temperatures of 240°C in situ as a gasket, however the base fabric
will resist continuous temperatures of 550°C (unstressed), the melting point >
800°C. Note if being used as a flexible material and not as a gasket the tem-
perature rating is lowered to 120°C.
• The product can be produced in multiple layers, i.e 2 Ply (3mm) or 4 Ply
(6mm).

Applications

• Excellent for door seals.
• Excellent for gasketing applications.

Products

• This is available in a range of different widths and thicknesses and is slit to order.

Further Information

Material Safety Data Sheet Natural Rubber Coated E Glass Cloth MSDS

Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

Flameshield Tape (Field Joint Oil and Gas Pipeline Protection)

• Flameshield tape has been designed by Textile Technologies to specifically
protect the anti-corrosion external coating on oil and gas pipelines during field
joint application.

• When the elastomeric ‘heat shrink’ is being shrunk by an industrial flame torch
the flameshield is positioned either side of the heat shrink to serve two purposes.

1. To prevent the extreme heat from the flame destroying the anti-corrosion outer
layer of the pipeline.

2. Allow sufficient heat to pass through the flameshield to pre-heat the pipeline to
allow the heat shrink to adhere to maximum performance.

• The flameshield is supplied in 25m lengths but are pre-cut on site to the correct
pipe circumference with sufficient overlap for a flame retardant Velcro to be sewn
on each end of the tape to hold in situ whilst heat is being applied.

• The flame retardant hook & loop is supplied as per the below.

Applications

• Flame protection of anti corrosion surface layer of oil and gas pipelines during field applied joint sealing applications.

Flameshield Product

Product Code Width (mm) Thickness (mm) Length (m) Unit of Sale
FSHIELD/150/25 150mm 3mm 25 (+/-)10% 1 Metre
FSHIELD/075/25 75mm 3mm 25 (+/-)10% 1 Metre

Flame Retardant Hook & Loop Products

Product Code Length (m) Width (mm) Unit of Sale Sold
FRHLT/GREY/25 25m 25mm 25m Pair Per Paired Coil
FRHLT/GREY/50 25m 50mm 25m Pair Per Paired Coil

Further Information

Material Safety Data Sheet Silicone Coated E Glass Cloth MSDS
Aluminium Foil Laminated E Glass Cloth MSDS
Para Aramid Stainless Steel Sewing Thread MSDS

Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

Fire Poi Wicking Webbing Tape

• Fire poi wicking webbing tape is 100% para-aramid based webbing that is 250°C
specifically designed for use with paraffin solvents.
Supplied
• It is extremely resistant to both heat and friction and capable of absorbing Per 25m Coil
large quantities of fuel. Per 25m Coil
Per 25m Coil
• The weave has been developed to minimise fraying and extend the life time Per 25m Coil
of the tape. If used properly the wick should last you several hundred burns if Per 25m Coil
not more. Per 25m Coil
Per 25m Coil
Applications Per 25m Coil
Per 25m Coil
• Used for wicking in Fire Poi. Per 25m Coil
Per 25m Coil
Products Per 25m Coil
Per 25m Coil
Product Code Thickness (mm) Width (mm) Unit of Sale Per 25m Coil
AM-TEX-SW/10/3 3mm 10mm 1 Metre Per 25m Coil
AM-TEX-SW/15/3 3mm 15mm 1 Metre Per 25m Coil
AM-TEX-SW/20/3 3mm 20mm 1 Metre Per 25m Coil
AM-TEX-SW/25/3 3mm 25mm 1 Metre Per 25m Coil
AM-TEX-SW/40/3 3mm 40mm 1 Metre Per 25m Coil
AM-TEX-SW/50/3 3mm 50mm 1 Metre Per 25m Coil
AM-TEX-SW/75/3 3mm 75mm 1 Metre Per 25m Coil
AM-TEX-SW/100/3 3mm 100mm 1 Metre Per 25m Coil
AM-TEX-SW/150/3 3mm 150mm 1 Metre Per 25m Coil
AM-TEX-SW/200/3 3mm 200mm 1 Metre Per 25m Coil
AM-TEX-SW/250/3 3mm 250mm 1 Metre
AM-TEX-SW/300/3 3mm 300mm 1 Metre
AM-TEX-SW/10/5 5mm 10mm 1 Metre
AM-TEX-SW/15/5 5mm 15mm 1 Metre
AM-TEX-SW/20/5 5mm 20mm 1 Metre
AM-TEX-SW/25/5 5mm 25mm 1 Metre
AM-TEX-SW/40/5 5mm 40mm 1 Metre
AM-TEX-SW/50/5 5mm 50mm 1 Metre
AM-TEX-SW/75/5 5mm 75mm 1 Metre
AM-TEX-SW/100/5 5mm 100mm 1 Metre
AM-TEX-SW/150/5 5mm 150mm 1 Metre
AM-TEX-SW/200/5 5mm 200mm 1 Metre
AM-TEX-SW/250/5 5mm 250mm 1 Metre
AM-TEX-SW/300/5 5mm 300mm 1 Metre

Further Information

Material Safety Data Sheet Spun Para Aramid Fibre Textiles MSDS

Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

Stainless Steel / Para Aramid Fibre Webbing 400°C

• Stainless steel fibres can be blended with para aramid fibres (50/50% composite) to
produce yarns capable of withstanding 400°C+.

• These yarns are then woven in to a tight, dense webbing construction commonly in
3mm or 6mm thicknesses although other thicknesses are available.

• The dense construction ensures a long life of repeated contact with hot glass.

Applications

• Prevents thermal shocks and micro cracks that may be fatal during glass
transformation.

• For glass production applications where temperatures are in excess of 400°C.
• Excellent for cushioning pads / stacker bars for the glass industry.

Products

• Available in 3mm or 6mm thicknesses from 25mm - 200mm wide.

Product Code Thickness (mm) Width (mm) Supplied Unit of Sale
SSPAW/50.50/6/120 6mm 120mm 1 Metre 1 Metre

Further Information

Material Safety Data Sheet Stainless Steel / Para Aramid Fibre Textiles

Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are
intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary
from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein
are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request.

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

Conversion Table

Linear Density

From To Multiply By From To Multiply By
inches millimetres 25.4
millimetres inches 0.0394 kg/m³ lbs./cu.ft 0.06242
inches centimetres 25.4
centimetres inches 0.3937 lbs./cu.ft kg/m³ 16.02
feet metres 0.3048
metres feet 3.281 Pressure

Square To Multiply By From To Multiply By
sq millimetres 6.452
From sq inches 0.155 kp/cm³ lbs./sq.in 25.4
sq inches sq feet 10.76
sq millimetres sq metres 0.0929 kp/cm³ MPa 0.0394
sq metres
sq feet To Multiply By MPa lbs./sq.in 25.4
cubic centimetres 16.39
Cubic cubic inches 0.06102 lbs./sq.in kp/cm³ 0.3937
cubic metres 0.02832
From cubic feet 35.315 MPa kp/cm³ 0.3048
cubic inches
cubic centimetres To Multiply By lbs./sq.in MPa 3.281
cubic feet cubic feet 0.03531
cubic metres UK gallons 0.22 Velocity
US gallons 0.2642
Capacity pints 1.76 From To Multiply By
fluid ounce 0.35
From litres 28.32 metres/second feet/second 3.279
litres litres 4.546
litres litres 3.785 feet/second metres/second 0.305
litres litres 0.5682
litres centilitres 2.857 Energy
centilitres
cubic feet To Multiply By From To Multiply By
UK gallons gross tons 0.9842
short tons 1.102 kilocalories kilojoules 4.184
US gallons hundred weights 0.101968
pints pounds 2.205 kilocalories British thermal units 3.9683
fluid ounce ounces 0.03527
metric tons 1.0161 kilojoules British thermal units 0.9484
Weight metric tons 0.9074
kilograms 50.813 watts BTU/h 3.4128
From kilograms 0.45359
metric tons grams 28.329 kcal/h BTU/h 3.9683
metric tons
kilograms kilojoules kilocalories 0.2369
kilograms
grams British thermal units kilocalories 0.2520
gross tons
short tons British thermal units kilojoules 1.0544
hundred weights
pounds BTU/h watts 0.2930
ounces
BTU/h kcal/hs 0.2520

Heat To Multiply By

From

kcal/m³ BTU/cubic feet 0.11236

kj/m³ BTU/cubic feet 0.0268

kcal/m³ kj/m³ 4.184

kcal/h cubic centimetres 3.968

kcal/h Wh/h 1.1622

Wh/h cubic metres 3.4128

kcal/(kg°C) cubic feet 1.0

kcal/(kg°C) kj/(kg K) 4.184

kj/(kg K) BTU(lb F) 0.2389

kcal/(m²h) BTU(sq.ft h) 0.3686

kcal/(m²h) W/(m K) 1.1622

Wh/(m²h) BTU/(sq.ft h) 0.3171

kcal/(m h °C) BTU/(sq.ft h °F/in) 8.0645

kcal/(m h °C) W/(m K) 1.1628

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

Conversion Table

Heat To Multiply By Temperature Conversion
BTU/(sq.ft h °F/in) 6.9347
From BTU/(ft h °F) 0.5779 °F to °C first deduct 32, multiply by 5 then divide by 9
W/(m K) BTU/(sq.ft °F) 0.1761
W/(m K) kcal/m³ 8.90 °C to °F multiply by 9, divide by 5, add 32
W/(m K) kj/m³ 37.313
BTU/cubic feet kcal/m³ 0.2390
BTU/cubic feet kcal/h 0.252
kj/m³ kcal/h 0.8604
BTU/h Wh/h 0.2930
Wh/h kcal/(kg°C) 1.0
BTU/h kcal/(kg°C) 0.239
BTU(lb F) kj/(kg K) 4.1860
kj/(kg K) kcal/(m²h) 2.713
BTU/(lb F) kcal/(m²h) 0.8604
BTU/(sq.ft h) Wh/(m²h) 3.154
W/(m² K) kcal/(m h °C) 0.124
BTU/(sq.ft h) kcal/(m h °C) 0.860
BTU/(sq.ft h °F/in) W/(m K) 0.1442
W/(m K) W/(m K) 1.7304
BTU/(sq.ft h °F/in) W/(m K) 5.677
BTU/(ft h °F)
BTU/(sq.ft °F)

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

Terms and Conditions For The Sales of Goods

1. INTERPRETATION
1.1 The definitions and rules of interpretation in this condition apply in these conditions.
1.2 Company: TEXTILE TECHNOLOGIES EUROPE LTD.

Conditions: these Terms and Conditions of Sale.
Contract: any contract between the Company and the Customer for the sale of Goods, incorporating these conditions.
Customer: the person, firm or company who purchases the Goods from the Company.
Goods: any goods agreed in the Contract to be supplied by the Company to the Customer (including any part or parts of them).
Sale: the sale of any Goods by the Company to the Customer.
1.3 A reference to a particular law is a reference to it as it is in force for the time being taking account of any amendment, extension, application or re-enactment and includes any subordinate legislation for the
time being in force made under it.
1.4 Words in the singular include the plural and in the plural include the singular.
1.5 A reference to one gender includes a reference to the other gender.
1.6 Condition headings do not affect the interpretation of these Conditions.
1.7 These Conditions apply only to Customers who are business customers and not consumers. A Customer is a business customer if the Customer purchases Goods from the Company for the purposes of
the Customer’s business, trade or profession, rather than for private use. All other Customers are consumers.

2. APPLICATION OF TERMS
2.1 Subject to any variation under Condition 2.3 the Contract shall be on these Conditions to the exclusion of all other terms and conditions (including any terms or conditions which the Customer purports to
apply under any purchase order, confirmation of order, specification or other document).
2.2 No terms or conditions endorsed on, delivered with or contained in the Customer’s purchase order, confirmation of order, specification or other document shall form part of the Contract simply as a result of
such document being referred to in the Contract.
2.3 These Conditions apply to the sale of any and all Goods by the Company and any variation to these Conditions and any representations about any Goods shall have no effect unless expressly agreed in
writing and signed by an authorised signatory of the Company. The Customer acknowledges that it has not relied on any statement, promise or representation made or given by or on behalf of the Company
which is not set out in the Contract. Nothing in this Condition shall exclude or limit the Company’s liability for fraudulent misrepresentation.
2.4 Each order or acceptance of a quotation for Goods by the Customer from the Company shall be deemed to be an offer by the Customer to purchase Goods subject to these Conditions.
2.5 No order placed by the Customer shall be deemed to be accepted by the Company until a written acknowledgement of order is issued and executed by the Company.
2.6 Any quotation is given on the basis that no Contract shall come into existence until the Company despatches a written acknowledgment of order to the Customer. Any quotation is valid for a period of 30
days only from its date (unless stated otherwise on the face of the quotation), provided that the Company has not previously withdrawn it.
2.7 No order which has been accepted by the Company may be cancelled by the Customer except with the agreement in writing of the Company and on terms that the Customer shall indemnify the Company
in full against all loss (including loss of profit), costs (including the cost of all labour and materials used), damages, charges and expenses incurred by the Company as a result of cancellation.

3. DESCRIPTION
3.1 The quantity and description of any Goods shall be as set out in the Company’s quotation or acknowledgement of order.
3.2 All samples, drawings, descriptive matter, specifications and advertising issued by the Company and any descriptions or illustrations contained in the Company’s website, catalogues or brochures are
issued or published for the sole purpose of giving an approximate idea of the Goods described in them. They shall not form part of the Contract and this is not a sale by sample.
3.3 If any Goods are to be produced, designed, built or configured and/or any process is to be applied to any Goods by or on behalf of the Company and/or in accordance with any specification submitted by
the Customer, then the Customer shall hold the Company harmless and shall fully indemnify the Company against any and all loss, damage, costs and expenses awarded against or incurred by the Company
in connection with, or paid or agreed to be paid by, the Company, in settlement of any claim for infringement of any patent, copyright, design, trade mark or any other intellectual property right of any other
person, resulting from the Company’s use of any specification so submitted.
3.4 Without prejudice to Condition 3.1, the Company shall use its reasonable efforts to supply the Goods in accordance with any specification submitted by the Customer and approved by the Company, but
may effect minor modifications to any such specification without the Customer’s approval.
3.5 Subject to the provisions of Condition 9.2 (b), the Customer shall be solely responsible for ensuring the suitability of the Goods for any specific purpose and also for ascertaining the compatibility or
inter-operability of the Goods with any other goods.

4. DELIVERY AND RETURNS

4.1 Delivery of the Goods shall be made by the Customer collecting the Goods at the Company’s premises at any time after the Company has notified the Customer that the Goods are ready for collection or,

if some other place for delivery is agreed by the Company, by the Company delivering the Goods to that place.

4.2 Any dates specified by the Company for delivery of the Goods are intended to be an estimate and time for delivery shall not be made of the essence by notice. If no dates are so specified, delivery shall be

within a reasonable time. Should expedited delivery of any Goods be agreed, the Company reserves the right to levy an expedited delivery charge.

4.3 Subject to the other provisions of these Conditions, the Company shall not be liable for any direct, indirect or consequential loss (all three of which terms include, without limitation, pure economic loss, loss

of profits, loss of business, depletion of goodwill and similar loss), costs, damages, charges or expenses caused directly or indirectly by any delay in the delivery of the Goods (even if caused by the Company’s

negligence), nor shall any delay entitle the Customer to terminate or rescind the Contract unless such delay exceeds 180 days.

4.4 If for any reason the Customer fails to take or accept delivery of any of the Goods, or the Company is unable to deliver the Goods on time because the Customer has not provided appropriate instructions,

documents, licences or authorisations:

(a) Risk in the Goods shall pass to the Customer (including for loss or damage caused by the Company’s negligence);

(b) The Goods shall be deemed to have been delivered; and

(c) The Company may store the Goods until delivery, whereupon the Customer shall be liable for all related costs and expenses (including, without limitation, storage and insurance);or

(d) Sell the Goods at the best price readily obtainable and (after deducting any reasonable costs and expenses in connection with the storage and expedited sale of the Goods), charge the Customer for any

shortfall below the price for the Goods.

4.5 The Company may deliver the Goods by separate instalments. Each separate instalment shall be invoiced and paid for in accordance with the provisions of the Contract.

4.6 Each instalment shall be a separate Contract and no cancellation or termination of any one Contract relating to an instalment shall entitle the Customer to repudiate or cancel any other Contract or instal-

ment.

4.7 With respect to the return of any non-faulty Goods, only stock Goods may be returned to the Company for replacement or refund, up to 14 days from the date of delivery thereof, and at the Company’s sole

discretion. Prior to returning any Goods to the Company, a Customer must complete a Goods Return Form. Goods Return Forms may be downloaded from the Company’s website at www. [ ]. A Goods

Return Number together with details of the address to which the Goods must be returned will be provided to the Customer by return email. Buyers must obtain and attach a Goods Return Number to the Goods

before returning any Goods to the Company. Without limitation, no replacement or refund will be made with respect to any Goods that are (a) returned to the Company without a properly attached Goods Return

Number, or (b) received by the Company more than 14 days after the date of delivery. Goods must be returned in their original packaging (with the inner seal unbroken) and in the condition in which they were

received by the Customer. The Company shall not be responsible for any damage to the Goods or any loss thereof in transit. All returns are subject to a 25% restocking fee. The Customer must also pay the

return carriage charges.

5. NON-DELIVERY
5.1 The Company shall not be liable for any non-delivery of the Goods (even if caused by the Company’s negligence) unless the Customer gives written notice to the Company of the non- delivery within 3
days of the date when the Goods would in the ordinary course of events have been received.
5.2 Any liability of the Company for non-delivery of the Goods shall be limited to replacing the Goods within a reasonable time or issuing a credit note at the pro rata Contract rate against any invoice raised for
such Goods.

6. RISK/TITLE
6.1 Risk of damage to or loss of the Goods shall pass to the Customer:
(a) In the case of Goods to be delivered at the Company’s premises, at the time when the Company notifies the Customer that the Goods are available for collection; or
(b) In the case of Goods to be delivered otherwise than at the Company’s premises, at the time of delivery or, if the Customer wrongfully fails to take delivery of the Goods, the time when the Company has
tendered delivery of the Goods.
6.2 Ownership of the Goods shall not pass to the Customer until the Company has received in full (in cash or cleared funds) all sums due to it in respect of:
(a) The Goods; and
(b) All other sums which are or which become due to the Company from the Customer on any account.
6.3 Until ownership of the Goods has passed to the Customer, the Customer shall:
(a) Hold the Goods on a fiduciary basis as the Company’s bailee;
(b) Store the Goods (at no cost to the Company) separately from all other goods of the Customer or any third party in such a way that they remain readily identifiable as the Company’s property;
(c) Not destroy, deface or obscure any identifying mark or packaging on or relating to the Goods; and
(d) Maintain the Goods in satisfactory condition and keep them insured on the Company’s behalf for their full price against all risks to the reasonable satisfaction of the Company. On request the Customer
shall produce the policy of insurance to the Company.
6.4 The Customer may resell the Goods before ownership has passed to it solely on the following conditions:
(a) Any sale shall be effected in the ordinary course of the Customer’s business at full market value; and
(b) Any such sale shall be a sale of the Company’s property on the Customer’s own behalf and the Customer shall deal as principal when making such a sale; and

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

Terms and Conditions For The Sales of Goods

(c) The proceeds of any such sale shall be held by the Customer as the Company’s bailee and in a fiduciary capacity, and the Customer shall pay the proceeds into a separate bank account opened for that
purpose and approved by the Company and shall ensure that in no circumstances are the proceeds mingled with other money or paid into an overdrawn bank account but are at all times identifiable as the
Company’s money; and
(d) If the Customer has not received the proceeds of any such sale as referred to in and pursuant to Condition 6.4 (c) it will, if called upon to do so by the Company, assign to the Company within seven days
after being required in writing so to do by the Company, all rights against the person or persons by whom the proceeds are owed.
6.5 The Customer’s right to possession of the Goods shall terminate immediately if:
(a) The Customer has a bankruptcy order made against him or makes an arrangement or composition with his creditors, or otherwise takes the benefit of any statutory provision for the time being in force for
the relief of insolvent debtors, or (being a body corporate) convenes a meeting of creditors (whether formal or informal), or enters into liquidation (whether voluntary or compulsory) except a solvent voluntary
liquidation for the purpose only of reconstruction or amalgamation, or has a receiver and/or manager, administrator or administrative receiver appointed over its undertaking or any part thereof, or documents are
filed with the court for the appointment of an administrator of the Customer, or notice of intention to appoint an administrator is given by the Customer or its directors or by a qualifying floating charge holder (as
defined in paragraph 14 of Schedule B1 to the Insolvency Act 1986), or a resolution is passed or a petition presented to any court for the winding-up of the Customer or for the granting of an administration order
in respect of the Customer, or any proceedings are commenced relating to the insolvency or possible insolvency of the Customer; or
(b) The Customer suffers or allows any execution, distress or diligence, whether legal or equitable, to be levied on his/its property or obtained against him/it, or fails to observe or perform any of his/its obli-
gations under the Contract or any other contract between the Company and the Customer, or is unable to pay its debts within the meaning of section 123 of the Insolvency Act 1986, or a secured lender to the
Customer takes any steps to obtain possession of the secured property or otherwise enforce its security, or the Customer ceases to trade; or
(c) The Customer encumbers or in any way charges any of the Goods.
6.6 The Company shall be entitled to recover payment for the Goods notwithstanding that ownership of any of the Goods has not passed from the Company.
6.7 The Customer grants the Company, its agents and employees an irrevocable licence at any time to enter any premises where the Goods are or may be stored or otherwise located, but in any event, and
without limitation, hereby undertakes to secure access at any time to any such premises for the Company, its agents and employees in order to inspect the Goods, or, where the Customer’s right to possession
has terminated, to recover them, and to undertake any work required to remove them, notwithstanding that the Goods may be affixed or attached to any other goods or property.
6.8 The provisions of this Condition 6 shall apply to all Goods notwithstanding the conversion of any Goods by virtue of the admixture of the Goods with any other goods or materials.

7. PRICE
7.1 The price of the Goods shall be the Company’s quoted price subject always to the provisions of Condition 2.5.
7.2 The Company reserves the right, by giving notice to the Customer at any time before delivery, to increase the price of the Goods to reflect any increase in the cost to the Company which is due to any
factor beyond the control of the Company (such as, without limitation, any foreign exchange fluctuation, currency regulation, alteration of duties, significant increase in the costs of labour, materials or other costs
of manufacture), any change in delivery dates, quantities or specifications for the Goods which is requested by the Customer, or any delay caused by any instructions of the Customer or failure of the Customer
to give the Company adequate information or instructions.
7.3 Except as otherwise stated under the terms of any quotation or in any price list of the Company, and unless otherwise agreed in writing between the Customer and the Company, all prices are given by
the Company on an ex works basis and where the Company agrees to deliver the Goods otherwise than at the Company’s premises, the Customer shall be liable to pay the Company’s charges for transport,
packaging and insurance.
7.4 The price is exclusive of any applicable value added tax, which the Customer shall be additionally liable to pay to the Company.

8. PAYMENT
8.1 Subject to any special terms agreed in writing between the Customer and the Company, the Company shall be entitled to invoice the Customer for the price of the Goods on or at any time after delivery of
the Goods, unless the Goods are to be collected by the Customer, in which event the Company shall be entitled to invoice the Customer for the price at any time after the Company has notified the Customer
that the Goods are ready for collection.
8.2 The Customer shall pay the price of the Goods (without any deduction, whether by way of set-off, counterclaim, abatement or otherwise) within 30 days after the end of the month in which the invoice for
the Goods is dated. The time of payment of the price shall be of the essence of the Contract.
8.3 If the Customer fails to make any payment on the due date then, without prejudice to any other right or remedy available to the Company, the Company shall be entitled to:
(a) Cancel the Contract or suspend any further deliveries to the Customer;
(b) Appropriate any payment made by the Customer to such of the Goods (or the goods supplied under any other contract between the Customer and the Company) as the Company may think fit (notwith-
standing any purported appropriation by the Customer); and
(c) Charge the Customer interest (both before and after any judgment) on the amount unpaid, at the rate of 5 per cent per annum above Barclays Bank plc’s base lending rate from time to time calculated on
a daily basis, until payment in full is made (a part of a month being treated as a full month for the purpose of calculating interest). The Company reserves the right to claim interest under the Late Payment of
Commercial Debts (Interest) Act 1998.
8.4 In the event that the Company owes money to the Customer under any contract or other arrangement entered into between the Company and the Customer the Company shall be entitled to set off such
sums owed by the Company to the Customer against any sums which the Customer shall owe to the Company pursuant to this Contract.

9. WARRANTIES
9.1 Where the Company is not the manufacturer of the Goods, the Company shall endeavour to transfer to the Customer the benefit of any warranty or guarantee given to the Company.
9.2 The Company warrants that (subject to the other provisions of these Conditions):
(a) On delivery, the Goods shall be of satisfactory quality within the meaning of the Sale of Goods Act 1979; and
(b) If the Customer has made it expressly known to the Company in the Customer’s order that the Goods shall be suitable for a particular purpose and the Company has expressly stated in the acknowledg-
ment of order that it will supply Goods suitable for that purpose, then the Goods shall, on delivery, be reasonably fit for the purpose so stated.
9.3 The Company shall not be liable for a breach of any of the warranties in Condition 9.2 unless:
(a) The Customer gives written notice of the defect to the Company (and also to the carrier, if the defect is a result of damage to any Goods in transit), within 7 days of the time when the Customer discovers or
ought to have discovered the defect; and
(b) The Company is given a reasonable opportunity after receiving the notice, of examining any Goods which the Customer has alleged to be defective and the Customer (if asked to do so by the Company)
returns such Goods to the Company’s place of business at the Company’s cost for the examination to take place there.
9.4 The Company shall not be liable for a breach of any of the warranties in Condition 9.2 if:
(a) The Customer makes any further use of any Goods which the Customer has alleged to be defective after giving notice of any such defect; or
(b) The Customer alters or repairs the Goods without the prior written consent of the Company; or
(c) The defect arises because the Customer failed to follow any oral or written instructions as to the storage, installation, commissioning, use or maintenance of the Goods or (if there are none) good trade
practice; or
(d) The defect arises from any drawing, design or specification supplied by the Customer, or from fair wear and tear, wilful damage, negligence, abnormal working conditions or from any misuse of the Goods;
or
(e) The full price for the Goods has not been paid by the time for payment stipulated in Condition 8.2; or
(f) The defect is of a type specifically excluded by the Company by notice in writing.
9.5 Subject to Condition 9.3 and Condition 9.4, if any of the Goods do not conform with any of the warranties in Condition 9.2 the Company shall at its option repair or replace any such Goods (or the defective
part) or refund the price of such Goods at the pro rata Contract rate provided that, if the Company so requests, the Customer shall, at the Company’s expense, return the Goods or the part of such Goods which
are defective to the Company. The Company shall, if it opts to replace the defective Goods, then deliver replacement Goods to the Customer at the Customer’s premises (at the Company’s expense), and
ownership of the defective Goods shall, if it has vested in the Customer, re-vest in the Company.
9.6 If the Company complies with Condition 9.5 it shall have no further liability for a breach of any of the warranties in Condition 9.2 in respect of such Goods.

10. LIMITATION OF LIABILITY
10.1 The following provisions set out the entire financial liability of the Company (including any liability for the acts or omissions of its employees, agents and sub-contractors) to the Customer in respect of:
(a) Any breach of these Conditions;
(b) Any use made or resale by the Customer of any of the Goods, or of any product incorporating any of the Goods; and
(c) Any representation, statement or tortious act or omission, including negligence, arising under or in connection with the Contract.
10.2 All warranties, conditions and other terms implied by statute or common law (save for the conditions implied by section 12 of the Sale of Goods Act 1979 are, to the fullest extent permitted by law,
excluded from the Contract.
10.3 Nothing in these Conditions excludes or limits the liability of the Company:
(a) For death or personal injury caused by the Company’s negligence; or
(b) Under section 2(3), Consumer Protection Act 1987; or
(c) For any matter which it would be illegal for the Company to exclude or attempt to exclude its liability; or
(d) For fraud or fraudulent misrepresentation.
10.4 Subject to Condition 10.2 and Condition 10.3:
(a) The Company’s total liability in contract, tort (including negligence or breach of statutory duty), misrepresentation, restitution or otherwise, arising in connection with the performance or contemplated
performance of the Contract shall be limited to the Contract price; and
(b) The Company shall not be liable to the Customer for loss of profit, loss of business, or depletion of goodwill in each case whether direct, indirect or consequential, or any claims for consequential compen-
sation whatsoever or howsoever caused, (including, without limitation, through any loss of data or files) which arise out of or in connection with the Contract.

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

Terms and Conditions For The Sales of Goods

11. EXPORT TERMS
11.1 In these Conditions “Incoterms 2000” means the international rules for the interpretation of trade terms of the International Chamber of Commerce as in force at the date when the Contract is made.
Unless the context otherwise requires, any term or expression which is defined in or given a particular meaning by the provisions of Incoterms 2000 shall have the same meaning in these Conditions, but if there
is any conflict between the provisions of Incoterms 2000 and these Conditions, the latter shall prevail.
11.2 Where the Goods are supplied for export from the United Kingdom, the provisions of this Condition 11 shall (subject to any special terms agreed in writing between the Customer and the Company) apply
notwithstanding any other provision of these Conditions.
11.3 The Customer shall be responsible for complying with any legislation or regulations governing the importation of the Goods into the country of destination and for the payment of any duties on them.
11.4 Unless otherwise agreed in advance in writing between the Customer and the Company, the Goods shall be delivered ex works the Company’s place of business.
11.5 Payment of all amounts due to the Company shall be made by irrevocable letter of credit opened by the Customer at Customer’s expense in favour of the Company and confirmed by a recognised Euro-
pean Bank acceptable to the Company or, if the Company has agreed in writing on or before acceptance of the Customer’s order to waive this requirement, by acceptance by the Customer and delivery to the
Company of a bill of exchange drawn on the Customer payable at sight to the order of the Company at such branch of a nominated British bank in England as may be specified in the bill of exchange.
11.6 The Customer undertakes not to offer the Goods for resale in any country notified by the Company to the Customer at or before the time the Customer’s order is placed, or to sell the Goods to any person
if the Customer knows or has reason to believe that person intends to resell the Goods in any such country.

12. INDEMNITY
The Customer shall hold the Company harmless and keep the Company indemnified in full and shall be liable to pay to the Company, on demand, all reasonable costs, charges, losses or expenses (including
legal and other professional fees and expenses) sustained or incurred by the Company (including, without limitation, any direct, indirect or consequential losses, loss of profit and loss of reputation, loss or
damage to property and those losses arising from injury to or the death of any person and loss of opportunity to deploy resources elsewhere), arising directly or indirectly from the Customer’s fraud, negligence,
failure to perform or delay in the performance of, or breach of, any of its obligations under the Contract, or from any use made or resale by the Customer of any Goods, subject to the Company confirming such
costs, charges and losses to the Customer in writing.

13. TERMINATION
13.1 Without prejudice to any other available rights or remedies, the Contract may be terminated immediately upon written notice from the Company to the Customer if:
(a) The Customer fails to pay any amount due under the Contract on the due date for payment and remains in default not less than 7 days after being notified in writing to make such payment; or
(b) The Customer commits a recurring or material breach of any term of the Contract and (if such breach is remediable) fails to remedy that breach within 14 days of receipt of written notice of the breach from
the Company; or
(c) Any of the events set forth in Condition 6.5 occurs or seems, in the reasonable opinion of the Company, likely to occur; or
(d) The Customer suspends or ceases, or threatens to suspend or cease, to carry on all or a substantial part of its business.
13.2 On termination of the Contract for any reason:
(a) The Customer shall immediately pay to the Company all of the Company’s outstanding unpaid invoices and interest and, in respect of Goods supplied but for which no invoice has been submitted, the
Company may submit an invoice, which shall be payable immediately on receipt; and
(b) The accrued rights and liabilities of the Company as at termination and the continuation of any provision expressly stated to survive or implicitly surviving termination, shall not be affected.
13.3 On termination of the Contract (however arising), Conditions 9-13 shall survive and continue in full force and effect.

14. INTELLECTUAL PROPERTY RIGHTS
The Goods, together with any drawings, documents and other information furnished to the Customer by the Company and all intellectual property rights contained therein are the property of the Company and/
or third party licensors of the Company. Any trademarks displayed on the Goods are the registered and/or unregistered trademarks of the Company and/or third party licensors of the Company. Under no cir-
cumstances may the Customer use, copy, alter, modify, or change these trademarks or any other proprietary markings on the Goods or any other intellectual property right of the Company and/or any third party
licensor of the Company without the Company’s prior written consent. The Customer may not copy, alter, modify or adapt the Goods or reverse engineer, decompile, disassemble, modify or create derivative
works from the Goods. Nothing contained in or on the Goods should be construed as granting, by implication or otherwise, any license or right to use or disclose to others any intellectual property right of the
Company and/or any third party licensor of the Company without the express written permission of the Company. The Customer shall fully indemnify the Company for any loss, damage, cost or expense incurred
by the Company resulting from the Customer’s infringement of, or unauthorised disclosure of, any intellectual property right of the Company and/or any third party licensor of the Company.

15. ASSIGNMENT AND SUBCONTRACTING
The Company, but not the Customer, may assign the Contract or any part of it to any person, firm or company and may subcontract any or all of its obligations under any part of the Contract.

16. FORCE MAJEURE
The Company reserves the right to defer the date of delivery, or to cancel the Contract or reduce the volume of the Goods ordered by the Customer (without liability to the Customer) if it is prevented from, or
delayed in, the carrying on of its business due to circumstances beyond the reasonable control of the Company including, without limitation, acts of God, governmental actions, war or national emergency, acts
of terrorism, protests, riot, civil commotion, fire, explosion, flood, epidemic, lock-outs, strikes or other labour disputes (whether or not relating to either party’s workforce), or restraints or delays affecting carriers
or inability or delay in obtaining supplies of adequate or suitable materials.

17. GENERAL
17.1 Each right or remedy of the Company under the Contract is without prejudice to any other right or remedy of the Company whether under the Contract or not.
17.2 The Contract constitutes the whole agreement between the parties and supersedes all previous agreements between the parties relating to its subject matter.
17.3 If any provision of the Contract is found by any court, tribunal or administrative body of competent jurisdiction to be wholly or partly unenforceable or unreasonable it shall to the extent of such unenforcea-
bility or unreasonableness be deemed severable and the remaining provisions of the Contract and the remainder of such provisions shall continue in full force and effect.
17.4 Any waiver by the Company of any breach of, or any default under, any provision of the Contract by the Customer shall not be deemed a waiver of any subsequent breach or default and shall in no way
affect the other terms of the Contract.
17.5 The parties to the Contract do not intend that any term of the Contract shall be enforceable by virtue of the Contracts (Rights of Third Parties) Act 1999 by any person that is not a party to it.
17.6 The formation, existence, construction, performance, validity and all aspects of the Contract shall be governed by English law and the parties submit to the non-exclusive jurisdiction of the English courts.
In the event of any dispute or difference arising between the parties which cannot be resolved through negotiation, the parties shall attempt to resolve the same in accordance with the Guidelines for Conciliation
and Mediation or the Guidelines for Supervised Settlement Procedure (“Mini Trial”) of the Chartered Institute of Arbitrators. If such dispute or difference is not resolved by one of these procedures within 28 days
of the parties entering into it, or if either party refuses to participate in it, the same shall be referred to a single arbitrator to be agreed upon by the parties pursuant to section 16(3) of the Arbitration Act 1996 (“the
Act”) or in default of agreement, to be appointed by the President or Vice President for the time being of the Chartered Institute of Arbitrators. In this clause 12.5, “dispute or difference” does not include a claim
for the price of the Goods by the Seller from the Buyer. The Arbitration shall be regarded as commenced for the purposes set out in section 14(1) of the Act when one party sends to the other a notice to concur
in the appointment of an Arbitrator. The seat of the arbitration shall be in London. The Arbitrator shall determine the dispute or difference in accordance with the Law of the Contract.

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]

UK Office Australia Office
Tel: 0161 367 1370 Tel: 04 0375 3944
Email: [email protected] Email: [email protected]