2023 Superior Catalog

RENTAL EQUIPMENT INDEX

Air Handling Equipment...............52-60 Electrical & Mechanical...........163-185 Pulling........................................151-159
Air Compressors...................................52,53 Pipe Threading Machines.................165-169 Electric Winches......................................151
Air Receiving Tanks...................................54 Pipe Tapping...........................................170 Air Tuggers.......................................153-154
Air Receiving Accessories.........................55 Power Pipe Cutters.................................172 Tugger Accessories.................................155
Air Amplifiers.............................................56 Pipe Saw.................................................172 Swivels.............................................156-159
Ventilation.................................................. 56 Roll Groovers...................................170, 171
Jet Fans.....................................................56 Beveling Machines..................172, 175, 176 Pumps ...........................................37-39
De-Icers..................................................... 57 ProPress Tools & Accessories........173, 174 Submersible Pumps..................................37
Air Handling Accessories.....................57-60 Cable Pulling ..................................178, 179 Diaphragm ................................................37
Conduit Bending.............................179, 180 Trash Pumps.............................................38
Air Tools......................................91-102 Bending/Threading Workstation.............181 Pump Accessories..............................38, 39
Chipping Hammers...................................91 Crimpers.................................................. 182 Diesel Pumps............................................39
Rivet Busters.............................................92 Punch Tools............................................182
Pavement Breakers...................................94 Cable Termination...................................182 Rigging......................................128-149
Clay Diggers..............................................96 Clamps.............................................128-131
Roto-Hammers.......................................... 97 HVAC ................................................ 163 Pipe Rollers ............................................131
Rock Drills.................................................97 Construction Heaters..............................161 Beam Trolleys..................................132, 133
Bench Rammers......................................100 Portable Air Conditioners........................161 Motor Pneumatic Trolleys...............134, 135
Non-Sparking Tools................................101 Snatch Blocks.................................136, 137
Hydraulic Equipment................104-117 Shackles...........................................138-141
Bolting...........................................62-88 Hydraulic Pumps.............................104, 105 Nylon, Polyester & Wire Slings.........142-144
Pneumatic Impact Wrenches...............63-67 Cylinders..........................................106-114 Turnbuckles......................................146-148
Sockets................................................68-70 Vertical Lifting Wedges............................115 Ratchet Binders.......................................149
Manual Torque Wrenches.........................72 Pull Cylinders...........................................115 DYNAFOR Load Indicator.......................149
Bolting Accessories...................................74 Hydraulic Punches..................................116
Hydraulic Square Drive Torque Wrenches...76 Hydraulic Accessories.............................117 Specialized Equipment.........................
Hydraulic Low Profile Bearing Heater........................................205
Torque Wrenches...............................77-80 Hydrostatic Test Pumps ................ 203 Holiday Detector......................................206
Hydraulic Torque Wrench Pumps.............81 Hydrostatic Test Pumps .........................203
Flange Spreaders.................................84-87 Welding & Cutting ........................10-31
Hydraulic Nut Cutters and Splitters..........87 Lifting ........................................119-126 Inverters .................................. 10-12, 15-17
Hydraulic Hand Pumps.............................88 Manual Hoist & Accessories....................119 Polarity Reversing.....................................12
Hydraulic Electric Pump............................88 Electric Hoist...........................................119 Inverter Accessories..................................13
On-Site Bolting Service & Calibration.......89 Air Hoists .........................................120,122 Induction Heating System.........................14
Air Hoist Chain Containers......................123 MIG Feeders..............................................19
Communications............................. 201 Lever Hoists............................................124 Guns (MIG)................................................20
2-Way Radios..........................................201 Chain Hoists.....................................125,126 Engine Drives.......................................21-27
Plasma Cutters.....................................26-28
Concrete ............................................ 43 Light Towers...................................... 47 Accessories............................................... 29
Compactors ..............................................41 Electric & Diesel Light Towers...................47 Weld Test Facilities..............................30,31
Concrete Grinders ....................................43
Concrete Vacuums....................................43 Material Handling.....................186-191 SERVICES
Concrete Vibrators....................................45 Lifting Bags.............................................184 StockUp™ On-Site Supply Program...........5
Mortar Mixers............................................45 Skip Pans................................................184 Customer Repair.........................................6
Concrete Saws........................................191 Material Basket........................................184 Warranty Service.........................................7
Core Drills................................................193 Brick Handling.........................................184 Product Demo Trailer..................................8
Machinery Rollers.............................185,186 On-Site Bolting Service & Calibration.......89
Drilling & Cutting .....................193-202 Roust-A-Bouts........................................ 187
Cutting Nibblers......................................191 Duct Hoists..............................................187
Gas Powered Saws.................................191 Lifting Magnets........................................188
Abrasive Blades.......................................191
Rail Saws.................................................191 Power & Distribution.............................
Rail Drills..................................................192 Spider Boxes.............................................35
Magnetic Drill Presses....................194, 196 Splitters..................................................... 33
2Annular Cutters................................197-198 Generators............................................ 49,50
Power Distribution Panels....................33-35

2 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

GET SERIOUS ABOUT YOUR SUPPLIES

Midland Tool & Supply and Superior Tool Rental & Repair work together to provide high quality products, rentals, equipment repair and
several unique services to jobsites across the nation. Our companies are headquartered in Oak Park, Michigan (Greater Detroit), with a
branch office in Calumet City, Illinois (Greater Chicago) and Madison, Illinois (Greater St. Louis). Each of our locations have meeting space
for important conversations with customers and vendors, a dedicated fleet of delivery vehicles, and warehouse space to keep over 10,000
products and rentals in immediate supply.

Greater Detroit Greater Chicago Greater St. Louis

Over 10,000 Products Industrial Tool & Delivery Via Private 24/7 – 365 Emergency StockUp™
& Rentals Equipment Rental Onsite Supply
Fleet or FedEx Service & Delivery

Onsite Product & Rental Onsite Weld Testing Customer Repair & Calibration, Testing
Bolting Services Demo Trailers
Facilities Warranty Service Center & Certification

Product & Rental Demo Trailer LOCATIONS Onsite Bolting Services & Calibration Onsite StockUp Tool Trailers & Connexes
Greater Detroit GO ONLINE GET SOCIAL
Call to Order Greater Chicago www.midlandtool.com
Greater St. Louis www.superiortoolrental.com
877.446.4352

3

PRODUCTS RENTALS

Adhesives, Hydraulic Paint & Painting Lifting & Material Hydraulic
Sealants & Tape Equipment Supplies Rigging Handling Equipment

Abrasives Job-Site Storage Air Handling
Pneumatic Tools Equipment

Drilling &
Cutting

Anchors Sockets, Ratchets Pumps
Cleaning & and Attachments Power Tools
Janitorial
Welding

Hand Tools Pumps
Rigging
Bolting

Concrete &
Masonry

Drilling, Cutting Specialized
Electrical Tools Equipment
Concrete &
Pipe Prep & Air Tools Compaction
Fabrication

Ladders Fasteners

Safety

Fluid & Lubricants Welding & Cutting

Power & Electrical &
Distribution Mechanical

Lighting Heating & Lights

Material Handling Communication

4 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

ONSITE SUPPLY PROGRAM TRAILERS & CONNEXES

The Benefits

How can onsite supply help enhance productivity on your site?
Our StockUp™ program is designed to address specific pain
points around your site and make your job easier.
1
What is StockUp™ Reduce Cost and Downtime

Our StockUp™ Program is designed to be an extension of our StockUp™ puts the products you consistently order
warehouse to stock customized inventory at your location. directly on the jobsite, reducing your downtime and
Check out our website and You Tube video to learn more: delivery costs.

Customizable Inventory 2 Invoice Efficiently
Work with our StockUp™ team to select products and inventory StockUp™ can generate invoices daily or weekly,
levels, based on your scope of work. reducing P.O. processing time.
Various Storage Options 3 Report and Forecast
Based off inventory and location, we utilize trailers, connexes, StockUp™ sofware can generate reports to inform
and tool rooms to efficiently store inventory on your site. management about product by shift, trade or peak
Automated Inventory Control manpower. This information can be used to forecast
Cloud Based software automatically tracks and replinishes needs for future jobs or outages.
inventory based on usage.
Unlimited Access
24/7 access to the StockUp™ program is available for selected
team members.
Nationwide Shipping
Whether you are down the street or across the country, we can
deliver to your jobsite.

Trailer Video

5

CUSTOMER REPAIR

Authorized Repairs:

• 2-Way Radios • Compressors • Hydraulic Pumps • Pressure Gauges
• Air Hoists • Electric Power Tools • Lever Hoists • Regulators
• Air Tuggers/Pneumatic Winches • Generators • Manual Bolting Tools • Small Engines
• Band Saws • Greenlee Electrical Tools • Magnetic Drill Presses • Threading Tools & Equipment
• Battery Power Tools • Hydraulic Bolting Tools • Material Handling Equipment • Torches
• Chain Hoists • Hydraulic Cylinders • Pneumatic Tools • Welders

When it comes to your equipment, you deserve a team of
people that are focused on you. We provide consistent

updates and communication on all your repairs, so that your
needs are met throughout the process.

Superior Tool offers repair on a wide variety of equipment.
If you don’t see your equipment listed above, call today.
Chances are our expert repair technicians have the experience
to service the tools you need fixed.

With multiple locations, we have the resources to service any of
your equipment. Contact one of our Repair Coordinators near you

today.

Oak Park, MI: Brian Hauk
(248) 595-9181

[email protected]

Calumet City, IL: Joe Grenchik
(219) 240-4067

[email protected]

6 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

WARRANTY SERVICE
Authorized Warranty Service Brands

Experience a simple warranty process. We put the emphasis
on you and handle everything on your behalf. No more dealing

with the big companies to file a claim. Let us do the heavy
lifting, so you can get your new tool back when you need it.

Have questions about your warranty? Contact your local Repair
Coordinator. No more waiting on hold or being shuffled around to
different service reps. Superior Tool makes it easy by providing
one contact to get the answers you need.
Looking to just purchase tools for your next job? Check-out
our sister company, Midland Tool and Supply, All purchases
are backed by warranty through Superior Tool and make it
simple to get a replacement or repair.

7

PRODUCT & DEMO TRAILER

ROAD SHOW Vinnie, Product Specialist
“You pick the day and time.
CUSTOMIZE YOUR DEMO DAY We’ll provide breakfast, lunch
or an afternoon snack.”
Vinnie Scurto
Product Specialist

248.727.8482
[email protected]

Our product demo trailer facilitates equipment testing and training
on the job-site, minimizing time spent away from important work.
It’s managed by our Product Specialist, Vinnie, who knows the
“ins and outs” of our retail and rental inventory. Scheduling a visit
with our Product Specialist will:

• Keep you aware of new, safe & efficient equipment
• Allow you to see equipment in action before purchasing
• Help you decide which equipment is right for your application

8 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

WELDING & CUTTING

MILLER INVERTER WELDERS

TESTED & CERTIFIED Welder Repair and Calibration
Equipment
TESTED &
CERTIFIED

Maxstar® 161 Series 120V/240V Portable Stick/TIG Welder
SPECIFICATIONS
Item # 907710
Processes
Phase Stick (SMAW) TIG (GMAW)
1-Phase
Out Connection Tweco®
Weldable Metals Stainless steel, steel
Current Type DC
Weld Output CC
Max. Open Circuit Voltage 48 VDC (12–16 VDC*)
Dim./Weight H 10.3" x W 5.6" x D 13.5" / 13 lbs

TIG & STICK SPECIFICATIONS Amps Input at Rated KVA at KW
Weld Input Welding Rated Output Output, 50/60 Hz Duty Cycle
Mode Power Amperage Range

T IG 112524A00 VV, 55 ––113600 AA 90 A at 13.6 VDC, 100% duty Cycle 14.61 1.75 1.70
S tick 121524A00 VV,, 220 0––19600AA 130 A at 15.2 VDC, 30% dyty Cycle 22.6 2.73 2.70
*S ense Voltage for LiftArc™ TIG 110 A at 14.4 VDC, 100% duty Cycle 9.35 2.24 2.12
160 A at 16.4 VDC, 20% duty Cycle 15.05 3.62 3.49
60 A at 22.4 VDC, 100% duty Cycle 14.68 1.75 1.71
90 A at 23.6 VDC, 30% duty Cycle 23.16 2.78 2.76
110 A at 24.4 VDC, 100% duty Cycle 14.31 3.43 3.30
160 A at 26.4 VDC, 20% duty Cycle 22.55 5.41 5.25

Maxstar® STR 210 Stick/TIG Welder

SPECIFICATIONS
Item # 907682
Processes
Phase Stick (SMAW), TIG (GTAW), TIG DC (GTAW-DC)
1- and 3-Phase
Out Connection Tweco®
Weldable Metals Stainless steel, steel
Current Type DC
Weld Output CC
Dim./Weight H 13.6" W 8.6" D 19.5" / 36 lbs

WELD SPECIFICATIONS Rated Phase Amps Input at Rated Output, 50/60 Hz
Welding Input Welding
Mode Power Amperage Range Output 120 V 208 V 240V 400 V 480 V KVA KW

T (GIGT AW) 2200 88––44 8800 VV 11––221100 A 210 A at 18.4 V, 3-Phase – 14 12 7 6 5.2 4.9
A 60% duty cycle 1-Phase – 24 20 12 10 4.9 4.9
16205%Adautty15cyVc,l e 1-P hase 22 – – – – 2.6 2.6
(SStMickA W) 210280 –V4 80 V 55––211000 A 210 A at 18.4 V, 3-Phase – 15 13 8 6 5.5 5.2
A 60% duty cycle 1-Phase – 26 22 13 11 5.3 5.3
90 A adtu2ty3.c6ycVl,e 1-P hase 23 – – – – 2.8 2.8
60%

10 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

MILLER INVERTER WELDERS
XMT® 350 FieldPro™ Welder w/ ArcReach® Technology

ArcReach® welding technology minimizes time spent walking to and from the power source, and
maximizes arc-on time, weld quality and job-site safety.

SPECIFICATIONS 907703
Item #

See Page 22 Processes Air Carbon Arc Cutting and Gouging (CAC-A), Flux Cored (FCAW),
ArcReach® MIG (GMAW), Pulsed MIG (GMAW-P), RMD®, Stick (SMAW), TIG (GTAW)
Stick /TIG Out Connection Tweco®
Remote Weldable Metals Aluminum, specialty metals, steel, stainless steel
907585 Weld Output CC/CV
907406 Current Type DC
Carbon Diameter 1/4"
907585 (2) Input Power Voltage Auto-Line™, 208-575 V
Input Phase 3-Phase 1-Phase
Voltage Range in CV Mode 10–38 V 10–38 V
Amperage Range in CC Mode 5–425 A 5–425 A
LA omapdsOInuptpuut ta, t6R0aHtezd 3-Phase 208 V 230 V 400 V 460 V 575 V KVA KW
1-Phase 2400.84VA 23360.1VA 42000.6VA 41670.8VA 57145.1V A K1V4A.2 A K1W3.6 A
60.8 A 54.6 A 29.7 A 24.5 A 19.9 A 11.7 A 11.2 A
Max. Open-Circuit Voltage H751V7D" Cx W 12.5" x D 24" / 93 lbs
Dim./Weight

XMT® 350 FieldPro™ Welders w/ ArcReach® Technology, Rack
Configurations

SPECIFICATIONS 907585 907406 907585 (2)
Item #
Item Type
Input Voltage 4 Pack Rack 6 Pack Rack 8 Pack Rack
460/480 V, 575 V 460/480 V, 575 V 460/480 V, 575 V
Input Phase 3-Phase 3-Phase 3-Phase
CInupruret nHtzT ype 50/60 Hz 50/60 Hz 50/60 Hz
DC DC DC
WMaexldOOpuetnpuCti rcuit Voltage CC / CV CC / CV CC / CV
WDiemig. h t 75 VDC 75 VDC 75 VDC
H 66" W 32" D 34.25" H 66" W 43" D 34.25" H 66" W 64" D 34.25"
599 lbs 759 lbs 1198 lbs

5 Pack XMT® 350 FieldPro™ Welders w/ ArcReach® Technology
30 KVA Power Panel

Power Panel SPECIFICATIONS SP-30-5W
Item # 480/3 phase, 200 amp circuit breaker
LISTED Primary Voltage 30 KVA
Transformer Distributes 120 and 208 V, 100 amp, 1 phase power
Secondary Power (10) 120 volt, 20 amp Hubbell duplex receptacles with spring-back,
weather proof covers are provided on each side of the unit, for use
with power tools and portable lighting. All are connected to 20 amp
Duplex Receptacles G.F.C.I. circuit breakers.
(2) 120/208 volt, 50 amp Hubbell twist-lock receptacles with spring-back,
TRwecisetp-Ltaocclke s weather proof covers are included for use with our SPB-6 portable
P ower Center power center. Both are connected to 50 amp G.F.C.I. circuit breakers.
Welders (10) 120 volt, 20 amp, 20A 1-pole G.F.C.I. breakers individually protect
Cart Features each duplex receptacle
Certifications Unit includes (5) Miller XMT® 350 FieldPro™ Welders for remote
Dim. / Weight welding applications
Roof has a 20° pitch for additional weather protection
UL Listed and NEMA 3R certified
H 71-1/2" L 59" W 34" / 1,535 lbs

11

MILLER INVERTER WELDERS
XMT® 350 FieldPro™ Welder w/ Polarity Reversing &
ArcReach® Technology

SPECIFICATIONS
Item # 907731
Applications
Heavy Industrial, Power Generation Plants, Construction, Shipbuilding
Air Carbon Arc Cutting and Gouging (CAC-A), Flux Cored (FCAW),
Processes MIG (GMAW), Pulsed MIG (GMAW-P), RMD®, Stick (SMAW), TIG (GTAW)
P olarity Reversing The 'Quick-Select' technology automatically selects the welding
process, the correct polarity, cable outputs and welding parameters
Out Connection Tweco®
Weldable Metals Aluminum, specialty metals, steel, stainless steel
Weld Output CC/CV
Carbon Diameter 1/4"
Input Phase 1-Phase, 3-Phase
Input Power Requires 1- or 3-phase power, Auto-Line™, 208-575 V
Voltage Range in CV Mode 1-Phase 10-38 V 3-Phase 10-38 V
Amperage Range in CC Mode 1-Phase 5–425 A 3-Phase 5–425 A
Rated Output 1-Phase 300 A at 32 VDC, 60% Duty Cycle
3-Phase 350 A at 34 VDC, 60% Duty Cycle
1-Phase 60.8 A 54.6 A 29.7 A 24.5 A 19.9 A 11.7 A 11.2 A
907742 Amperage Input @ @208 V @230 V @400 V @460 V @575 V @KVA @KW
907741 Rated Output 3-Phase 40.4 A 36.1 A 20.6 A 17.8 A 14.1 A 14.2 A 13.6 A
907742 (2) @208 V @230 V @400 V @460 V @575 V @KVA @KW
CIMnuparxurteOnHptZeT nypCeir cuit Voltage 7D550CV/ D50CHz
LISTED Weld Output HCC17/"CxVW 12.5" x D 24" / 93 lbs
Dim./Weight
12
XMT® 350 FieldPro™ Welders w/ Polarity Reversing &
ArcReach® Technology, Rack Configurations

SPECIFICATIONS 907742 907741 907742 (2)
Item #
Item Type
Input Voltage 4 Pack Rack 6 Pack Rack 8 Pack Rack
460/480 V, 575 V 460/480 V, 575 V 460/480 V, 575 V
Input Phase 3-Phase 3-Phase 3-Phase
ICnupruret nHtzT ype 50/60 Hz 50/60 Hz 50/60 Hz
DC DC DC
WMaexldOOpuetnpuCti rcuit Voltage CC / CV CC / CV CC / CV
75 VDC 75 VDC 75 VDC
Dim. H 66" W 32" D 34.25" H 66" W 43" D 34.25" H 66" W 64" D 34.25"
Weight 599 lbs 759 lbs 1198 lbs

5 Pack XMT® 350 FieldPro™ Welders w/ Polarity Reversing, ArcReach®
Technology & 30 KVA Power Panel

SPECIFICATIONS

Item # SP-30-5W-PR
Primary Voltage
STreacnosnfodramryePr ower 480/3 phase, 200 amp circuit breaker
30 KVA
Distributes 120 and 208 V, 100 amp, 1 phase power
(10) 120 volt, 20 amp Hubbell duplex receptacles with spring-back,
Duplex Receptacles weather proof covers are provided on each side of the unit.
Each are connected to 20 amp G.F.C.I. circuit breakers.
For use with power tools and portable lighting.
Power Panel TR wecisetp-Ltaocclke s (2) 120/208 volt, 50 amp Hubbell twist-lock receptacles with spring-back,
weather proof covers are included for use with our SPB-6 portable
P ower Center power center. Both are connected to 50 amp G.F.C.I. circuit breakers.
(10) 120 volt, 20 amp, 20A 1-pole G.F.C.I. breakers individually protect
each duplex receptacle
Welders (A5r)cMReillaecrhX®MTTe®ch3n5o0loFgieyldPro™ Welders w/ Polarity Reversing &
Cart Features Roof has a 20° pitch for additional weather protection
Certifications UL Listed and NEMA 3R certified
Dim./Weight H 71-1/2" L 59" W 34" / 1,535 lbs

Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

MILLER INVERTER ACCESSORIES
ArcReach® Stick/TIG Remote

Portable and lightweight, the ArcReach stick/TIG remote allows you to change weld settings in your work
area, saving a trip to the power supply.

SPECIFICATIONS
Item # 301325
For Use With
PDrimoc./eWsseeigsh t Dimension, XMT, or compatible engine-driven ArcReach power source
AHir4C" aWrbo7n.1A2r5c" CLut2t1in.7g5a"nd/Go5u.8ginlbgs(CAC-A), Stick (SMAW), TIG DC (GTAW-DC)

ArcReach® power source ArcReach®
Stick/TIG Remote

ArcReach® SuitCase® 12 Wire Feeder

• ArcReach® capabilities eliminate the time spent tracing weld cables hundreds of feet back to the power
source because weld operators can make adjustments at the ArcReach wire feeder or remote.

• Ultra-Low Drag Inlet Guide Pins make loading the wire easy and does not deform the wire on the way
into the drive rolls improving wire feeding performance.

SPECIFICATIONS
Item # 951729
Processes
Input Power Flux Cored (FCAW), MIG (GMAW)
Input Welding Operates on open-circuit voltage and arc voltage: 14-48 VDC/110 max. OCV
Circuit Rating 425 A at 60% Duty Cycle

Wire Feed Speed 50–780 ipm (dependent on arc voltage)
W ire Diameter Solid: .023" - .052"
Flux-Cored: .030" - 5/64"
Maximum Spool Size 12" / 45 lbs
Dim./Weight H 15.5" W 9" D 21" / 35 lbs

ArcReach® Smart Feeder

• Easy process changeover. Simply connect the ArcReach Smart Feeder to your leads and you
• Sayrenerergaidcyptorogcoe.sAsell sc.oRnMtroDlsaanudtopmulasteicdaMllyIGshwifteltdointhgepAerrcmRitesapcrhoScemdaurrteFseeder.

with one wire and one gas to eliminate process switch-over time.

SPECIFICATIONS 951733
Item #

PICInnripprocuucutteiWtPsRsoeeawldstiei nnrgg Flux Cored (FCAW), MIG (GMAW)
Pulsed MIG (GMAW-P), RMD®
Operates on open-circuit voltage and arc voltage: 14-48 VDC/110 max. OCV
275 A at 60% Duty Cycle

DWMWiaiimrrxeei.m/FDWueimaeemidgShepSttope oerl eSdiz e .H5100231-"585"/.05-03".i30pWm4lb5(s1"d3ep"enDde2n1t.o5n" arc voltage)
/ 50 lbs

13

MILLER ARCREACH® HEATER

ArcReach® Heater
Air Cooled Induction Heating System for Preheat & Bakeout

SPECIFICATIONS #301390
Item # OStpoerraagtee:s-o4n–o1p3e1nº -FcircuUitsavoglet:a1g4e:–5100–47º0FV
IAnmpubtiePnotwTeemr perature Range 7H.818k.W6"aWt 11010.%2" dDu2ty6.c7y"cle/ 43 lbs
Rated Output
Dimensions / Weight

ORDERING INFORMATION Item# Description
Equipment
ArcReach® Heater Package #301390
Includes ArcReach® Heater and extension cable
A ir Cooled Quick Wrap # 301452 •• RFoeqr uuiprestop1re0h"edatiainmseutlaetriopnipfoerstemperatures over 392º
Preheat Insulation #301453030 30'
(1/2" x 6" x 120") Air Cooled Cable #301453050 50' Requires preheat insulation
(1/2" x 6" x 240") #301453080 80' for temperatures over 390º
(1/2" x 12" x 120")

AIR COOLED CABLE SPECIFICATIONS Cable Length Required For
Preheat Insulation NPS Pipe Size 3 Turns/Side
w/ Cable Harness 2 Turns/Side 4 Turns/Side
(1/2" x 16" x 120") 30"
Air Cooled Quick Wrap 1/2" 30" 30" 30"
(1-1/2" to 10" diameter) 3/4" 30" 30" 30"
Air-Cooled Cable 1" 30" 30" 30"
w/ Preheat Cable 1-1/4" 30" 30" 30"
Cover (30' 50' 80') 1-1/2" 30" 30" 30"
Series Cable 2" 30" 30" 30"
Adapter (18") 2-1/2" 30" 30" 30"
Temperature 3" 30" 30" 30"
Measurement 3-1/2" 30" 30" 30"
(welded on) 4" 30" 30" 30"
Contact Thermocouple 5" 30" 30" 30"
Sensor (Probe) 6" 30" 30" 50"
8" 30" 30" 50"
10" 30" 30" 50"
12" 30" 50" 50"
14" 30" 50" 50"
16" 30" 50" 50"
18" 30" 50" 80"
20" 50" 50" 80"
22" 50" 50" 80"
24" 50" 50" 80"
26" 50" 80" 80"
28" 50" 80" 80"
30" 50" 80" 80"
32" 50" 80"
34" 50" 80" Two 50" cables
36" 50" 80" Two 50" cables

Compatible ArcReach® Power TIG STICK TIG Preheat Insulation
Sources: STICK Contact
STICK STICK Thermocouple
XMT® 350 FieldPro™ STICK Sensor (Probe)
XMT® 350 FieldPro™ STICK
w/ Polarity Reversing XMT® 350
PipeWorx 350 FieldPro™ FieldPro™
Trailblazer® 325 Air Cooled Cable
Big Blue® 400 Pro w/ Preheat
Big Blue® 400 PipePro® Cable Cover
Big Blue® 500 Pro ArcReach® Heater
Big Blue® 600 Pro
Big Blue® 600 Air Pak™ ArcReach®
Big Blue® 800 Duo Pro Heater Extention Cable
Big Blue® 800 Duo Air Pak™

14 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

LINCOLN INVERTER WELDERS
Invertec® V275-S Welder w/ Tweco® Style Receptacle

• Outstanding AWS E6010 and E7018 performance: Up to 7/32" diameter electrode that enables
both whip and drag techniques

• Touch Start TIG®: Allows the welding arc to be established without high frequency starting
• Air carbon arc cutting and gouging: With up to 3/16" diameter carbon electrode
• Selectable Hot Start: Turn it off for thin material or flip it on for thick, rusty or dirty material
• Variable Arc Force: Dial in the “soft” or “crisp” arc you want

SPECIFICATIONS
Item # K2269-3

Processes Gouging, Stick (SMAW), TIG (GTAW)
Out Connection Tweco®
Phase 3-Phase 1-Phase
220 / 380 / 400 / 415 / 440 / 3 / 50 220 / 380 / 400 / 415 / 440 / 1 / 50
Input Power 250A / 30V / 35% 200A / 28V / 100%
Rated Output 32/20/19/18/17A 25/15/15/14/13A 63/42/40/38/36A 48/32/30/29/27
Weld Output CC, DC

Output Range 5-275 A
Dim./Weight H 13.6" W 9" D 20.25" / 54.5 lbs

Flextec® 350X Multi-Process Welder w/ Crosslinc™

• Streamlined operator panel minimizes setup time
• Components designed to run cool for long life in high temperature environments
• Compatible with across-the-arc, analog, digital or CrossLinc™ feeders
• CrossLinc™ Technology: Full functionality without control cables

SPECIFICATIONS
Item # K4271-1

Processes Arc Gouging, Flux-Cored (FCAW), MIG (GMAW), Stick (SMAW),
Phase 3-Phase
Out Connection Tweco®
Input Power 380 / 460 / 575 / 3 / 50 / 60
Rated Output 300A / 32V / 100% 350A / 34V / 60%
Input Current at
Rated Output 26 / 23 / 18

Output Range 5-425 A Max OCV 80V DC
Weld Output CC/CV, DC
Dim./Weight H 17" W 13" D 23" / 77 lbs

4 Pack Flextec® 350X Multi-Process Welders w/ Crosslinc™

SPECIFICATIONS K3402-1
Item #

Rack Input Power 380 / 460 / 575 / 3 / 50 / 60
Rated Output 350A / 34V / 60% 300A / 32V / 100%
Rack Input Current at Rated Output 74/68/68
Output Range 5-425 A
Dim./Weight H 59.72" W 37.5" D 32.88" / 620 lbs

15

LINCOLN INVERTER WELDERS

5 Pack Flextec® 350X Welders w/ ArcReach® Technology
30 KVA Power Panel

Power Panel SPECIFICATIONS SP-30-5W
Item # 480/3 phase, 200 amp circuit breaker
Primary Voltage 30 KVA
Transformer Distributes 120 and 208 V, 100 amp, 1 phase power
Secondary Power (10) 120 volt, 20 amp Hubbell duplex receptacles with spring-back,
weather proof covers are provided on each side of the unit, for use
with power tools and portable lighting. All are connected to 20 amp
Duplex Receptacles G.F.C.I. circuit breakers.
(2) 120/208 volt, 50 amp Hubbell twist-lock receptacles with spring-back,
RT wecisetp-Ltaocclke s weather proof covers are included for use with our SPB-6 portable
Power Center power center. Both are connected to 50 amp G.F.C.I. circuit breakers.
Welders (10) 120 volt, 20 amp, 20A 1-pole G.F.C.I. breakers individually protect
Cart Features each duplex receptacle
Certifications Unit includes (5) Lincoln Flextec 350X Welders for remote
Dim./Weight welding applications
Roof has a 20° pitch for additional weather protection
UL Listed and NEMA 3R certified
H 71-1/2" L 59" W 34" / 1,535 lbs

LISTED

16 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

LINCOLN INVERTER WELDERS
Flextec® 650X Multi-Process Welder w/ Crosslinc™

• Use with a wide range of available 3-phase input power
• Easy one-knob process selection
• Components designed to run cool for long life in high temperature environments

SPECIFICATIONS
Item # K3425-1

Processes Flux-Cored (FCAW), Gouging, MIG (GMAW), Stick (SMAW),
Submerged Arc (SAW), TIG (GTAW)
Out Connection Tweco®
Input Power 380/460/575/3/50/60
Rated Output 750A/44V/60% 650A/44V/100%
Input Current at 61/50/40 A
Rated Output 57/47/38 A

Output Range 10-815 A
Weld Output CC/CV, DC
Dim./Weight H 21.8" W 16.1" D 29.3" / 165 lbs

4 Pack Flextec® 650X Multi-Process Welders w/ Crosslinc™

SPECIFICATIONS K3516-1 750A / 44V/60%
Item # 380/460/575/3/50/60
Input Power 650A / 44V / 100%
Rated Output
Rack Input Current 202 / 167 / 105 A
at Rated Output 10-815 Amps
Output Range H 70.25" W 37.5" D 33" / 960 lbs
Dim./Weight

Power Wave® S350 Advanced Process Welder

SPECIFICATIONS
Item # K2823-3

Processes Stick, DC TIG, Pulsed DC TIG, MIG, Pulsed MIG, Flux-Cored
Out Connection Tweco®
Weld Output CC/CV, DC
Input Voltage 208/230/380-415/460/575/1/3/50/60
GMAW: 350A/31.5V/40% SMAW: 325A/33V/40% GTAW-DC: 350A/24V/40%
Rated Output GMAW: 300A/29V/100% SMAW: 250A/30V/100% GTAW-DC: 300A/22V/100%

Input Current 3-Ph/40% Duty Cycle: 39/35/19/17/14, 3-Ph/100% Duty Cycle: 31/28/15/14/11
at Rated Output 1 Ph/40% Duty Cycle: 60/67/NA/NA/NA, 1-Ph/100% Duty Cycle: 60/53/NA/NA/NA
Output Range 5-350 A
Dim./Weight H 20.40" W 14" D 24.80" / 85 lbs

4 Pack Power Wave® S350 Advanced Process Welders

SPECIFICATIONS K2823-3-4
Item # 380/460/575/3/50/60
Rack Input Power GMAW: 350A/31.5V/40% SMAW: 325A/33V/40% GTAW-DC: 350A/24V/40%
GMAW: 300A/29V/100% SMAW: 250A/30V/100% GTAW-DC: 300A/22V/100%
Rated Output 3-Ph/40% Duty Cycle: 39/35/19/17/14 3-Ph/100% Duty Cycle: 31/28/15/14/11
1 Ph/40% Duty Cycle: 60/67/NA/NA/NA 1-Ph/100% Duty Cycle: 60/53/NA/NA/NA
Input Current H 71.22" W 36" D 36" / 630 lbs
at Rated Output
Dim./Weight

17

LINCOLN INVERTER ACCESSORIES

Crosslinc™ Remote

SPECIFICATIONS
Item # K4345-1

Processes Stick (SMAW), TIG (GTAW), MIG (GMAW), Flux Cored Arc Welding (FCAW)
Compatibility With CrossLinc equipped Flextec® welders
Rated Output 425 A at 100% Duty Cycle, 550 A at 60% Duty Cycle
Dim./Weight H 7.75" W 10.0" D 4.5" / 10 lbs

Multi-Weld® 350 Multi-Operator Welder

• 350 amp, DC+, 100% duty cycle welder capable of CV-wire, CC-stick or arc gouging
• Connect several DC+ welders to one power supply
• Independent Arcs: Starting or stopping one Multi-Weld doesn’t affect the welding of the others
• The Multi-Weld 350 is capable of continuous operation at 350 amps in 122°F air temperature
• Controls are located close to the operator for quick access

SPECIFICATIONS K1735-1
Item #
PIIRDOWnnraiuppemottuulecpd.tt/deuWOCVstOsouueReultirtagpsrtspenh u nugtt tte a(Ct uRraretendt/VDoCltOaguetp/Duut t(y80CVycDlCe)) Stick, Mig, Flux-Cored, Gouging
CC/CV, DC
80V DC (50-113 Peak Range)
350A / 34V / 100% DC+
165 A
1H51-410.6V" oltWs, 103"0-D35201a.5m"p/s, Max. OCV: 78V
59 lbs

Distribution Box

SPECIFICATIONS
Item # K1736-1
Connectivity Easily connect up to 5 Multi-Weld® 350s
Pig Tails Contains copper bus bar for connecting multiple “pig-tails.” For pig-tails included.
Dim./Weight H 6.5" W 20" D 17" / 11 lbs

Miniflex® Portable Fume Extraction Unit

SPECIFICATIONS K3972-3
Item #

Processes Stick (light duty), TIG, MIG, Flux-Cored (light duty)
Filter Surface Area 118 ft2
Sound Level 80 dBA
Airflow CFM Low: 95 High: 108
Power Rating HP 2.4 (1.2/motor)
Input Power (Voltage/Phase/Hertz) 120/1/50/60
Input Current 12.0 A
Dim./Weight H 29" W 15.6" L 16.8" / 41 lbs

Lincoln 4-Pack Rack Flextec® Distribution Box

Miniflex®

Multi-Weld® 350
LN-25 or LN-25X MIG Feeder

18 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

MIG FEEDERS

LN-25X MIG Feeder w/ Crosslinc™

• Full control of your system with no control cables
• Remotely controls preset voltage without a control cable
• Industry-proven Maxtrac® wire drive system provides reliable feeding and easy changeovers
• Trigger interlock switch provides operator comfort over long welds

SPECIFICATIONS K4267-1
Item #
Processes
MIG, Flux-Cored
CrossLinc Compatible Yes
Input Volts 15-110 VDC
Output Capacity 450 A at 60% Duty Cycle
Flow Meter Yes
Wire Feed Speed 50-700 ipm
Wire Size Range Solid: .023-1/16" Cored: .030-5/64"
Aluminum: .035-1/16"
Dim./Weight H 15" x W 8.7" x L 23.2" / 45 lbs

LN-25 MIG Feeder

• For MIG and flux-cored arc welding processes using up to 44 lb spools
• Designed for solid, cored and aluminum wire sizes
• Selectable dial for setting low or high range wire feed speed
• Includes DC voltmeter, voltmeter polarity switch, arc sensing lead, clip and weld power cable

SPECIFICATIONS
Item # K4101-1
DFOWPWC Inlriruopiimoorrteewuscp./tseFSuWLMVesitzieenoseeCidcelgttaResshCSpr a tpo anemgceeipdt ay t ible UMNHSA15N05olpoouI1l--Gim74d4t,o00:i"nF0.30xuVlu20miDpWx30:Cm--1C.A70/o13.a465rt"e"-1d6xC/01oL%6r"e2dD1:"u.0ty3/ 53C-55y/cl6bl4es"

Power Feed® 25M Plastic Case Push-Pull Wire Feeder

• This compact shop or construction wire feeder is push-pull capable for premium aluminum welding
• Featuring Lincoln MAXTRAC® drive system, full controls and procedural memory presets

SPECIFICATIONS K2536-5
Item #

Processes Flux-Cored (FCAW), Gouging, MIG (GMAW), Pulsed,
STT®, TIG (GTAW), Stick
IRnaptuetdPOouwtepru t 40 VDC
Gearing 500 A at 60% Duty Cycle FGECxMtArAaWW-T: :o33r0q0-u-4e40000ipipmm
Wire Feed Speed Range SFGCtMaAnAWdWa:r:d550S0--8p80e00e0dipip(mfmactory setting) 0.023" - 1/16"
Solid Wire Size Range 0.023" - 1/16"
Cored Wire Size Range 0H.01340.5""- 5W/648".5" D 23.5" 0.030" - 3/32"
Dim./Weight / 35 lbs

19

MIG GUNS

BTB 400A MIG Gun w/ Large Curved Handle

SPECIFICATIONS BTB
Item # MIG (GMAW)
RPraotecdesOs utput 400 A
Duty Cycle 100% CO2 Gas, 60% w/ Mixed Gases
Wire Size Ranges .023" to 1/8"
NCaebckle Length Rotatable, no tools required to change rotatable necks
15 ft industrial grade cable

Magnum® Classic MIG Gun, Semiautomatic

SPECIFICATIONS K126-2 Classic
Item # Flux-Cored Self-Shielded
Process 350 Amps
Rated Amps @ 60% Duty Cycle 15' Industrial Grade
Cable Length .062" to 3/32"
Wire Diameters 62º
Gun Tube Angle

Magnum® PRO Curve™ Welding Gun, Semiautomatic

SPECIFICATIONS K2952-2
Item #
Process
Rated Amps @ 60% Flux-Cored (FCAW), MIG (GMAW), Pulsed MIG (GMAW-P)
Duty Cycle MCOix2e:d4:04000A A @ 50% DC
Wire Diameters .025" to 5/64"
Cable Length 15 ft

Python 225A Air Cooled MIG Push/Pull Gun

SPECIFICATIONS 232-825
Item # Aluminum, flux cored wires, steel
Weldable Metals Air Cooled
Cooling Mechanism 6" Gooseneck, Ez-lock barrel can rotate 360º
Barrel Specs 225 A at 100%
Rated Output 800 ipm
Wire Feed Speed 25 ft
Aluminum and Cored Wire: 0.030" - 1/16" Solid and Hard Wire: 0.030" - 0.045"
Snake Skin Length Miller, Lincoln and Frontius feeders
Wire Type & Diameter
Compatibility

20 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

LINCOLN ENGINE-DRIVES
Classic 300 MP Perkins® Diesel Welder/Generator

SPECIFICATIONS K4263-1
Item #
Processes
Weld Output Flux Cored (FCAW), Gouging, MIG (GMAW), Stick (SMAW), TIG (GTAW)
CC/CV, DC
Description 300 AMP DC arc welder with all copper windings and pure DC power generator
Rated DC Output 300A/32V/60% 250A/30V/100% 90V DC, Max OCV
DC Current Fine Tune 40-350 Amps
Adjustment Range 220 Max, 160-240, 120-190, 80-130, Min-90
3,000 Watts, 60 Hz, Ac
Auxiliary Power 20 Amps at 120 V with sealed GFCI module
13 Amps at 240 V
Engine Model Perkins® 403F-1ST Diesel EPA Tier 4 24.7 HP 3 cylinders
Engine Speeds Full Load: 300A (1800 rpm) High Idle: 1650-1800 rpm Low Idle: 1440 rpm
Trailer Engine Capacities Diesel: 16 gal Oil: 6.3 qts Coolant: 7.8 qts
Mounted Dim./Weight H 37.1" x W 24.3" x L 62.8" / 1364 lbs
Optional
Trailer Vantage® 500 Diesel Welder/Generator
Mounted
Optional SPECIFICATIONS K2686-4
Item # Flux Cored (FCAW), Gouging, Stick (SMAW), TIG (GTAW), MIG (GMAW)
Processes CC/CV, DC, 22kW
Weld Output DC Constant Current: 500A/40V/100%, 525A/38V/100%, 30-525A
DC Pipe Current: 300A/32V/100%, 40-300A
Touch Start TIG Range: 250A/30V/100%, 20-250A
CC Rated Output Arc Gouge: 500A/40V/100%, 30-525A
Single Dial Continuous Control: 60V DC Max OCV @ 1850 rpm
DC Constant Voltage: 500A/40V/100%, 525A/38V/60%
Wire Feeder Power: 120V/60Hz, 42V/60Hz
CV Rated Output Single Dial Continuous Control: 14-40 V
Overview: 22,000 Peak Watts, 60 Hz
Two 120V Duplex Receptacles: Sealed GFCI Modules (20A Per Duplex, 40A Total)
G enerator AC Power 1-Phase Full KVA Receptacle: 50A @ 240V Each Branch Circuit
3-Phase Full KVA Receptacle: 50A @ 240V
Engine Model Perkins 404D-22T FLEX EPA Tier 4i, 4 cylinders, 45 HP @ 1850 rpm
Engine Speeds Weld Speed (500A Load): 1850 rpm High Idle: 1850 rpm Low Idle: 1400 rpm
Engine Capacities Diesel: 20 gal Oil: 11.2 qts Coolant: 11.5 qts
Dim./Weight H 35.9" (46.6" to top of exhaust) W 25.3" L 60" / 1290 lbs

SAE-500® Severe Duty Diesel Welder/Generator

SPECIFICATIONS K4053-1
Item #

Processes Flux Cored (FCAW) with CV Adapters, Gouging, Stick (SMAW), TIG (GTAW)
Weld Output CC, DC
Rated Output at 104º F 400A / 40V / 100%
500A DC Welding / 40V / 60%
Output Range 80-575 A, DC
Generator Output 3000 Watts, 60 Hz, AC
Engine Model Deutz Diesel TD2.9L4 EPA Tier 4 Final Water-Cooled 4 Cylinder
Engine HP and Speeds Horsepower: 64 hp at 1800 rpm
Full Load 500A: 3600 rpm High Idle: 1800 rpm Low Idle: 1180 rpm
Engine Capacities Fuel: 29 gal Oil: 8.9 qts Coolant: 9.5 qts
Dim./Weight H 45.8" W 28" L 83" (54.3" to top of exhaust) / 2111 lbs

21

LINCOLN ENGINE-DRIVES
Lincoln Dual Maverick® 200/200X Engine-Driven Welder/Generator

SPECIFICATIONS K4382-1
Item # Lincoln Electric
Brand 2 Operators
Welder Operator Type Flux-Cored Gas-Shielded (FCAW-G), Flux-Cored Self-Shielded
P rocesses (FCAW-S), Gouging, MIG (GMAW), Stick (SMAW), TIG (GTAW)
S ingle Mode Rated Output IEC Rating: 335A/33.4V/60%, 290A/31.6V/100%,
Dual Mode Rate Output Max Rating: 450A/24.5V/60%
IEC Rating: 200A/28V/60%, 170A/26.8V/100%,
Single Mode Output Range Max Rating: 225A/24.5V/60%
Arc Gouging: 100-450 Amps CC-Stick: 50-450 Amps,
CV-Wire: 13-40 Volts Downhill Pipe (CC): 50-450 Amps,
Dual Mode Output Range Touch Start® TIG: 20-255 Amps
Arc Gouging: 100-250 Amps CC-Stick: 30-225 Amps,
Open Circuit Voltage CV-Wire: 13-40 Volts Downhill Pipe (CC): 30-225 Amps,
AC Generator Aux. Power Touch Start® TIG: 20-250 Amps
Aux. Receptacles 60 Max OCV
ENGINE SPECIFICATIONS Single Phase: 10kW @ 60 Hz
Engine Model NEMA 14-50R (240V/42A/1), NEMA 5-20R (120V/20A/1)
Engine Specs
Displacement Tier 4 Final Compliant, Kubota D902
Engine Displacement 24.8hp @ 3600rpm, Cylinder Water Cooled Diesel Engine
Fuel Capacity High Idle: 3600 Low Idle: 2500
Oil Capacity High Idle: 54.8 cu in Bore x Stroke: 2.83" x 2.9"
Dimensions 20 gal
Weight .98 gal
Machine Only: H 36.1" x W 27.0" x L 65.0"
To Top of Exhaust Pipe: 44.4"
1160 lbs

22 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

MILLER ENGINE-DRIVES
Big Blue® 350 PipePro® Diesel Welder/Generator

• Superior arc performance:
• Adjustable arc control • Adaptive Hot Start™ (stick)
• FCAW/MIG arc performance • Lift-Arc™ TIG with Auto-Stop™

• Auto Remote Sense™ (ARS) detects if a remote control is plugged into the 14-pin receptacle and
eliminates confusion of a remote/panel switch

• Low OCV stick (VRD) reduces the open-circuit voltage to 15 volts when the welding power source is
not in use, increasing operator safety without compromising arc starts

SPECIFICATIONS 907428
Item #

Processes Air Carbon Arc Cutting and Gouging (CAC-A), Flux-Cored (FCAW)
WCW WWaeeeerlllldbdddoaOMOnbuulotDeptdpuiMeaut metRtaReattaelesndr g aet 100% MIG (GMAW), Stick (SMAW), TIG DC (GTAW-DC)
Duty Cycle at 104º F RStaeteeld, :st1a/i4n"less steel
CC/DC (Stick) CC/DC (TIG) CV/DC (FCAW/MIG)
20–400 A 20–400 A 14–40 V

300 A at 32 VDC 350 A at 27 VDC 400 A at 24 VDC

Max. Open-Circuit Voltage 8I1Cd5-olPenVh:tDai6nCs8ue.,7o:1u8d5s4BV:/41D20CW,A0(,0ese01ldn2w:s07ea/22tvt4.s1o0ltdVaPBgAeeCa,fko6:r01s2Ht,ic0zk00anwdatLtisft-Arc™ TIG)
Gen. Power Rated at 104º F Mitsubishi S4L2, four-cylinder, liquid cooled industrial diesel,
Sound Levels EPA Tier 4 Final Compliant
Engine Model W24e.7ldH: P1800 rpm Idle: 1500 rpm
EH nogrsineepoSwpeeer ds Fuel: 11.5 gal Oil: 5.8 qts Coolant: 10 qts
Trailer DEnimgn./eWCeaigphatc ities W 26.25" H 32" D 56" / 1018 lbs
Mounted
Optional Big Blue® 450 Duo CST Diesel Welder/Generator
Trailer
Mounted • Multi-function fuel gauge: Displays fuel level and engine hours, and can be customized to set oil
Optional change interval reminders. In the case of high coolant temperature, low oil pressure, or low fuel level, the
engine will shut down to prevent damage, or make restarting easier.

• Adaptive Hot Start™ for stick arc starts: Automatically increases the output of a weld should the
start require it. Prevents the electrode from sticking and creating an inclusion

• Remote amperage control: Provided through 14-pin receptacle on front of the machine and
permits use of standard and wireless remote amperage control devices

SPECIFICATIONS 907477
Item # Air Carbon Arc Cutting and Gouging (CAC-A), Stick (SMAW),
WPO CWraueeortllcbpddeouiansntbgslMDeeMsoiMa odmedete ea tlesr TIG DC (GTAW-DC)
WMW ROGSoaeuaeetuntxllepddne.durdOOOata,tuLptuo2tee1trpp3vn2uPue2-ftoCtºtls.RwFRiraa ecattruenORdigtaueaVtt tpeo1udlt2t a 2gºeF Stainless Steel, steel
Rated 3/16" carbons (paralleled)
CC/DC (Stick/TIG)
Separate (dual outputs) Paralleled (combined)
5–225 A (each side)
5–280 A (one side only) 10–450 A

175 A, 27 VDC, 100% duty cycle 350 A, 27 VDC, 100% duty cycle
737-Phase:
1-Phase: 12,000 watts, 240 VAC, 60 HZ, continuous
10,000 watts, 120/240 VAC, 60 Hz, continuous

72.2 dB

Engine Model Mitsubishi S4L2, four-cylinder, liquid cooled industrial diesel,
DWHEnoiemgrlsdi.ne/SWpepoeCewieagedphr at cities EPA Tier 4 Final Compliant
24.7 hp
WF18u0e20l6: 1.r2p15m.5"
gaHl Oil: 6L.3 qts Coolant: 10 qts
32" 56" / 1064 lbs (without fuel)

23

MILLER ENGINE-DRIVES

Big Blue® 800 Duo Pro Diesel Welder/Generator

Also available 800 Duo Air Pak™ Welder/Generator w/ Air Compressor on page 27

SPECIFICATIONS 907587
Item #

Air Carbon Arc Cutting and Gouging (CAC-A), Flux-Cored (FCAW),
Processes MIG (GMAW), (GMAW-P), Stick (SMAW), Stud Welding, (13mm)
Weldable Metals Submerged Arc (SAW), TIG DC (GTAW-DC)
Stainless Steel, Steel
Carbon Diameter 1/2"
Weld Mode/Process CC/DC (Stick/TIG) CV/DC (MIG/FCAW)
W OuetlpduOt uMtpoudteR ange Separate Paralleled Separate Paralleled
Also available 800 Duo Air Pak™ Weld Output at 100% (dual outputs) (combined) (dual outputs) (combined)
Wonelpdaegr/eG3e4nerator w/ Air Compressor Duty Cycle Rated 104º F 20–400 A 40–800 A 14–40 V 14–40 V
Trailer MGeanx.eOrapteonr-CPiorcwueitrVOoulttapguet 400 A at 36 V 700 A at 44 V 400 A at 34 V 750 A at 40
Mounted Rated at 104º F (each side) 800 A at 38 V (each side) 800 A at 38 V
Optional Engine Model 83-5PVhDaCse, :1527V,D00C0(sweantstsepveoaltka,g2e0f,o00r 0stwicakttasncdoLnitfitn-Auorcu™s TIG)
HEEnnoggrsiinneeepoSCwpaeepera dcsit ies 1-Phase: 15,000 watts peak, 12,000 watts continuous
Standard Shutdowns Deutz TD 2.9 L4, EPA Tier 4 Compliant, 120V block heater
Dimensions / Weight 6WF5ue.e7lld: h: 2p1580g0al
rpOmil: Idle: 13C5o0orlpanmt: 16 qts
8.5 qts
High coolant temperatures, low fuel level, low oil pressure
W 28.5" H 46" D 69.5" (53.75" to top of exhaust) / 1869 lbs

Trailblazer® 275 Welder/Generator w/ Excel™ Power & GFCI
Receptacles, Liquid Propane

SPECIFICATIONS
Item # 907691

Processes Stick (SMAW), MIG (GMAW), Flux-Cored (FCAW), DC TIG/Pulsed TIG
(GTAW/GTAW-P), Air Carbon Arc (CAC-A) Cutting and Gouging,
WC aerlbdoMnoDdiea/mPerotecre ss RAiartPelda:sm3/a16C"uttCinagpaanbdleG: 1o/u4g"ing*
Amp/Volt Ranges CC/DC (Stick/TIG) CV/DC (MIG/FCAW)
10-275 A 10-35 V
Rated Weld Output at 104° F PE27xe5caekAl:™a1t1P2,0o80wV0,ew1r:0a20tt4%s00dCuwotayntttcisny,cu2loe0uAs:a1t01,25000V,w6a0ttHs z pure
Single-Phase Generator Power
W eld Sound Levels @ 23 11g25en0keAWraLtSootraapdno:dw6a5erdrdaPBtoidwl3ee2rs5:p7Ae3e.Ld5odaanBdd: while welding
Generator Sound Levels @ 2ft3 ft 73E.5xcdeBl Power: 65 dB

E ngine Type Kohler CH730
21 HP at 36 rpm
EDFunimeglienCneasSipopancesiet/dieWss eight HTWFwue2ienl8dl-:"c:1y(A32liun2gtd.o7ae-5lrS,"fpoteoOuerit-dloc:™yp1c.ol5e2f4qoe0vtxs0ehr,ah2ue8as0dt)0v,aW3lv2e20,00in", doDurs3t4r60ia0.l50a"irrp-cm/ool4eId5d9legl:ab2sso4l0in0e engine
Trailer rpm
Mounted
Optional *With Spectrum® Plasma Cutters

Trailblazer® 325 Welder/Generator w/ GFCI Receptacles, Liquid Propane

SPECIFICATIONS
Item # 907775

WPC raeorlcbdeoMsnsoDedsiea /mPerotecre ss Stick (SMAW), MIG (GMAW)*, Flux-Cored (FCAW)*, DC TIG (GTAW),
Amp/Volt Ranges RAiar tCeadr:b3o/n16A"rcC(CapAaCb-lAe): Cutting and Gouging
1/4"
CC/DC (Stick/TIG) CV/DC (MIG/FCAW)
20-305 A 15-40 V
RWSGiaenentgledeledrSa-PWtoohueranlSsddeoOuLGnueedtvnpeLeuelrsatvtea@oltsr 21P@30o42wft3° eFfrt P113520e05akkAAW: aL1St0ot2,aa58dn0:dV06,aw51rd0ad0tPBt%sowdC3eu2ort5y:n7tAci3ny.Lcu5oloedauBds::
10,000 watts
73.5 dB

E ngine Type Kohler CH730LP
23.5 HP at 3600 rpm
DF EunimeglienCneasSipopancesiet/dieWss eight HFWTwue2einl8dl-:":c1(Ay32lui2ngt.od7a-e5lSr",ptfeooOeuitdlro:-™pc1y.o5c2fl4qee0txos0hv,ae2ur8hs0et)0a,dW3v2a20lv00e", ,oarDi3r-46c00o.0o5l"repdm/ind4uI7sd5tlreilab: ls2e4n0g0inrpem
Trailer
Mounted * With wire feeder
Optional
24 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

MILLER ENGINE-DRIVES
Trailblazer® 325 Welder Generator w/ GFCI Receptacles, Gas

SPECIFICATIONS
Item # 907510

Processes Stick (SMAW), MIG (GMAW), Flux-Cored (FCAW), DC TIG/Pulsed TIG
(GTAW/GTAW-P), Air Carbon Arc (CAC-A) Cutting and Gouging,
CW aerlbdoMnoDdiea/mPerotecre ss RAiartPelda:sm3/a16C"uttCinagpaanbdleG: 1o/u4g"inCga*rbons
Amp/Volt Ranges CC/DC (Stick/TIG) CV/DC (MIG/FCAW)
10-325 A 10-35 V
RSGWiaenentgledeledrSa-PWtoohueranlSsddeoOuLGnueedtvnpeLeuelrsatvtea@oltsr 21P@30o42wft3° eFfrt P113522e05akkAAW: aL1St2ot2,aa08dn0:dV06,aw5r1dad0tP0Bts%owC3deo2urn5t:yt7iAnc3uy.L5cooludeasB d::
10,500 watts
73.5 dB

E ngine Type Kohler CH730
23.5 HP at 3600 rpm
DE FunimeglienCneasSipopancesiet/dieWss eight HWFTwue2einl8dl-:"c:1y(A32liun2gtd.o7ae-5lrS,"fpoteoOuerit-dloc:™yp1c.ol5e2f4qoe0vtxs0ehr,ah2ue8as0dt)0v,aW3lv2e20,00in",douDrs3t4r6i0a0.l50a"irr-pcmo/ole4Idd60lel:b2s400 rpm
Trailer
Mounted *With Spectrum® Plasma Cutters
Optional

Trailblazer® 325 Welder/Generator w/ GFCI Receptacles, Diesel

SPECIFICATIONS 907566
Item #
PCWA rmaeorlpcbd/eoVMsnosolDetdsiRea(/amXPn-ergRoteecasrey sQsu ality) Stick (SMAW), MIG (GMAW), Flux-Cored (FCAW), DC TIG/Pulsed TIG
GSRWiaenentgledeledrSa-PWtoohueranlSsddeoOuLGnueedtvnpeLeuelrsatvtea@oltsr 21P@30o42wft3° eFfrt R(GaTtAeWd:/G3/T1A6W" -CPa),pAaibr lCea: r1b/o4n" Arc (CAC-A) Cutting and Gouging
E ngine Type Carbons
FDE unimeglienCneasSipopancesiet/dieWss eight CC/DC (Stick/TIG) CV/DC (MIG/FCAW)
10-325 A 10-35 V
P113522e05akkAAW: aL1St2ot3,aa03dn0:dV07,aw51rd0ad0tPBt%sowdC3eu2ort5y:n8tAci1ny.Lcu5oloedauBds::
10,500 watts
81.5 dB

Kubota D902
24.8 HP at 3600 rpm
FHWThue2reel8dle:":-1(AC32uy4gtl.io3an-7ldS5ep"r,eOtieonidld:t™ou3ps.9t2or4iqaf0tles0lxi,qh2ua8iud0s-0tc),o3oW2le0d20,0, d"oire3sD6e4l050.3rp7m5"
Trailer Idle: 2400 rpm
Mounted / 620 lbs
Optional

25

MILLER ENGINE-DRIVES
Trailblazer® 302 Air Pak™ Welder/Generator w/ Air Compressor

WELDER SPECIFICATIONS
Item # #907549001
SAPRWNaGDtirmaeieenmo1ttnlgpecd0eeWl/de4ienrVnseºa-sWogFsPitigloo ehtM(h4rnlaRdt0osPs aºd OeoCnewug ) *tee psru t CS112008tCi–00c/3%kDA0/CT0adI AGtu 3t Cy2HocVny2 tc8inl"eu Hou3s4CM113:.0305VI1–00G"/31D%(/At5,FCo0CadV0 tPtAuo0 3etWpyw2ao cakVf7yt: te7c1sx1l3e1h, l20ab00uCS112/0s0002tCti0–0w)4c/2%k0AaA2/WCtVT5tad,s IGt2uA120t0 y5"0c/V5yD 0cl5eA9,.660251HcBCC"2rzarha/ata2ntnre4kgkrVeyaa:s css1shi0isas–trt7g5e A

ENGINE SPECIFICATIONS
EHFOTIWdyunoielpleegrlCedsliSn eCaSpeppapeoaBpeecwardeiacetd nyir t dy(H WP)a rranty M23T112w7,,2.674ililh0g50nep00a-rqc l/rat3ypt,li0mn30d,60e0rr,0pfmorpumr-cycle overhead valve, industrial air-cooled. gasoline*
Standard Shutdowns Low oil pressure

* Fuel stabilizer is recommended for gas engines that are used infrequently.

AIR COMPRESSOR SPECIFICATIONS
SAODF FCWerhuouioelauttmreCoyttkudmpaiACnrorpeiagyerwastcsPDci nlcsreiesote Cylsrivso Beumrrraeyp n rCedos nssotarnt M2R83H11120.0oi7igl–0tlcc5hae1%ffrrm6mqyp 0trs(e(0cp0s.rs.8se6i8uwg2r memw3(i31t/h/m6m0einilne)p)castatir)ti3c2,6c,40lu00t0crhprmpfom;r
on/off, oil change intervals 500 hours
28 cfm (0.79 m3/min) at 3,000 rpm;
(idle)

Spectrum® 625 X-TREME™ Plasma Cutting System

SPECIFICATIONS

Item # 907579
Input Power
240 V 120 V (20 A) 120 V (15 A)
Rated Output 40 A at 140 VDC, 27 A at 91 VDC, 20 A at 88 VDC,
60% duty cycle 35% duty cycle 60% duty cycle
Amps Input at Rated
Output, 60 Hz, 1-Phase 27.6 25.0 17.7

KVA 6.6 3.0 2.1
KW 6.5 3.0 2.1
Plasma Gas Air or nitrogen only
Dimensions H 9" (229 mm) W 5.5" (140 mm) D 13.25" (337 mm)
Net Weight with Torch* 12 ft 21 lbs 20 ft 23 lbs
Certified by Canadian Standards Association to both the Canadian and U.S. Standards.
Compatible with Trailblazer®
302 Air Pak™ & with Big Blue® CUTTING SPECIFICATIONS
800 Duo Air Pak™ Mild Steel @ 40 Amps Mild Steel @ 27 Amps

Plate Thickness Approximate Plate Thickness Approximate
Travel Speeds* Travel Speeds*
1/8"
156 ipm 12 ga 115 ipm
1/4" 64 ipm 1/8" 88 ipm
3/8" 36 ipm 3/16" 50 ipm
1/2" 22 ipm 1/4" 28 ipm
5/8" 13 ipm 3/8" 15 ipm
* Travel speed s are appro ximately 80% of maximum 1/2" 8 ipm
5/8" 5 ipm

26 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

MILLER ENGINE-DRIVES
Big Blue® 800 Duo Air Pak™ Welder/Generator w/ Air Compressor

WELDER SPECIFICATIONS #907752
Item #
Weld Mode/Process
OW uetldpuOtuMtpoudteR ange CC/DC (Stick/TIG) CV/DC (MIG/FCAW)
Separate Paralleled Separate Paralleled
(dual outputs) (combined) (dual outputs) (combined)
20–400 A 40–800 A 15–50 V 15–50 V
Weld Output at 100% Duty Cycle 400 A at 36 V* 700 A at 44 V* 400 A at 34 V* 750 A at 40 V*
Rated at 104ºF (40ºC) (each side) 800 A at 38 V (each side) 800 A at 38 V
Max. Open-Circuit Voltage
Generator Power Output 3-Phase: 85 VDC 30 VDC**
Rated at 104º F (40ºC)*** 1-Phase: 27,000 watts peak, 20,000 watts continuous
15,000 watts peak, 12,000 watts continuous
Dimensions H 46" W 28.5" D 69.5"
Net Weight Duo Air Pak: 2,095 lb Add 165 lb when fuel tank is full

ENGINE SPECIFICATIONS
Model Big Blue 800 Duo Air Pak
Engine Brand Deutz TD2.9 L4
THFyePpa etu res ET6u5Pr.Ab7oT-iecrha4rgFeindalfocuorm-cpylliianndte. rI,nlciqluudide-sco1o2l0edV block heater.
Engine Speeds Idle: 1,350 rpm Weld: 1,800 rpm industrial diesel

Sound Levels at 23 ft Idle: 71.3 dB Weld: (800 A load) 78.9 dB
Capacities Fuel: 25 gal Oil 8.5 qt Coolant 16 qt
Automatic Engine Shutdown Low oil pressure, high coolant temperature, low fuel level

AIR COMPRESSOR SPECIFICATIONS
Compressor Brand Ingersoll Rand CE55 G1
Features ORoiltcahryansgcereiwntewrvitahlseloefc5tr0ic0 clutch for on/off
Free Air Delivery Idle: 40 cfm Weld: 60 cfm hours. Life expectancy of 30,000 hours.

Working Pressure Constant 100 psig (7 bar)
Duty Cycle 100%
OAuiltoCmapaaticciCtyompresso r Shutdowns 4 qt
Oil temperature
* Meets NEMA and IEC ratings. ** Sense voltage for stick and Lift-Arc™ TIG.
***Will operate either 60 Hzor 50/60 Hz power tools, lights, etc.

Spectrum® 875 Plasma Cutting System

SPECIFICATIONS #907583
Item # Rated: 7/8"
Cutting Capacity Sever: 1-1/4"
Mild Steel: 7/8"
Material Thickness AStluaminliensusmS: te5/e8l:" 7/8"
208 or 230 V, 1 Phase
Rated Input 1-phase: 60 A at 140 VDC
208 V: 40% duty cycle
Rated Output at 104° F 230 V: 50% dutyKcVyAc:le9.9
Amps Input at Rated Output, 208 V: 47
50/60Hz 230 V: 42 KW: 9.8
Max Open Circuit Voltage 400 VDC
Compatible with Big Blue® Plasma Gas MAirino:r6n.7it5rocgfemn only
800 Duo Air Pak™ R equired Input Pressure/Flow Max: 120 psi at 90 psi

Includes XT60 hand-held torch w/ 20' cable
Dimensions / Weight 10' power cord
HHe1a3v.y5-"dutyWw8o.r7k5c" lamD p18a.n5d" flexible cable with quick connect
/ 49 lbs (with 20’ torch)

CUTTING SPECIFICATIONS
Mild Steel Recommended Cut Speed

Thickness Approximate Travel Speeds* Thickness Approximate Travel Speeds*

1/4" 105 ipm 3/4" 18 ipm
3/8" 54 ipm 7/8" 15 ipm
1/2" 34 ipm 1" 10 ipm
5/8" 27 ipm
* Travel speeds are approximately 80% of maximum

27

PLASMA CUTTERS

Hypertherm® Powermax30® Air Plasma Cutter

SPECIFICATIONS 3/8" @ 10 ipm
CSeuvtteinragnCceapCaacpitayc ity 5/16" @ 20 ipm
Power Supply Type 5/8" @ 5 ipm
Input Voltage Inverter – IGBT
Input Current @ 2.5 KW 120-240 V, 1-PH, 50/60 Hz
ROauttepdutOCuutprruetnVt oltage 120-240 V, 1-PH, 29-15 A
Duty Cycle @ 104° F 15-30 A
OCapbelneCLierncugitthV oltage 83 VDC
Engine Drive Requirements 20%, 120 V
Certifications 35%, 240 V
Dimensions / Weight 256 VDC
10 ft
5.5 kW for full 30 A output
CSA-certified for use in the Americas
16.5" D x 7.7" W x 13.1" H (including handles) / 29.8 lbs (with 15' torch)

Hypertherm® Powermax Plasma Systems

SPECIFICATIONS POWERMAX85 POWERMAX125
Item #

I Kniplouwt aVtotlOtaugtep ut 200-480 V, 1-PH, 50/60 Hz 480/600 V, 3-PH, 50/60 Hz
200-600 V, 3-PH, 50/60 Hz 21.9 kW
12.2 kW
I nput Current @ 12.2 kW 200/208/240/480 V,
1-PH 70/68/58/29 A
POWERMAX85 200/208/240/480/600 V, 480/600 V, 31/24 A
POWERMAX125
O RauttepdutOCuutprruetnVt oltage 3-PH 42/40/35/18/17 A 30-125 A
25-85 A 175 VDC
143 VDC
60% @ 85 A, 230-600 V, 3-PH
Duty Cycle @ 104ºF 60% @ 85 A, 480 V, 1-PH
50% @ 85 A, 240 V, 1-PH
50% @ 85 A, 200-208 V, 3-PH 100% @ 125 A, 480/600 V, 3-PH
40% @ 85 A, 200-208 V, 1-PH
GD ORepiamcesonemSnCumspiireopcnnuldysiet dwVoG/laHtasagInnedle(lOte sC V) 100% @ 66 A, 230-600 V, 1/3-PH
PIFnloopwwuteRPraoStewu/PperprelCsysauTbryleep eL ength D30159V.7D"C W 9.2" H 17.9" D32203V.3D"C W 10.8" H 20.0"
ECWneegritignifheictDawtriiov/en2sR5 eFqtuTiroermchen t CCGuoletutaginning, g:d:4r40y50, 0osicsl-cfhffrh,e,6e7.7.a5sircscfomfrm@n@it8r75o0gpepsnis i CCGuoletutagininng,g: :2d26r10y2,I/Imo/miinli-nf(5r(4e550e0sacscfihrfh)o)@[email protected] r(e8(6n50ppsis)i)
10 ft 10 ft
Inverter - IGBT Inverter - IGBT
20 kW for full 85 A output 40 kW for full 125 A output
CSA-certified for use in the Americas 4C8S0A-Vcer1tif0ie5d.7folrbusse in6t0h0e AVme1r0ic4a.s7 lbs
71 lbs

Capacity Thickness Cut Thickness Cut
Cutting Speed Cutting Speed

Item # POWERMAX85 POWERMAX125
RCeacpoamcimty ended 1-11"/4 " 2100
CSeavpearcaitnyce ipm 1-1/2" 18 ipm
ipm 1-3/4" 10 ipm

1-1/2" 5 ipm 2-1/4" 5 ipm

PCiaeprcaec*ity 3/4" - 1" -

Capacity Metal Removal Groove Metal Removal Groove
Item # Rate Gouging Profile** Rate Gouging Profile**
Typical POWERMAX85 POWERMAX125
Gouge
Capacity 19.5 lbs per hour D 0.23" W 0.28" 27.6 lbs per hour D 0.17-0.31" W 0.24-0.39"

*Pierce rating for handheld use or with automatic torch height control **Actual groove profile varies with torch angle, arc stretch, and technique

28 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

WELDING ACCESSORIES

Fixed Velocity Thickness Gauge

SPECIFICATIONS MX-1
DVVCICDRRPOTtreeeoauaoiipamsllmwnnsmeoonpeg.trccsel/piaa# emWiidrttut y yyuiSeet neco RSiggreueahrTSrtn tectp gimenee gcp ss Aluminum body with nickel plated end caps (gasket sealed)
-20 to 120° F
1 to 10 MHz frequency range, dual-element (transmit and receive)
A(2l)k1a.l5inVeaBlkaatlitneerieosr :18.20VhNouiCradNAiCAacdelBlsatteries: 20 hours
4.5 digital, backlit display with 0.5" numerals
PC software and USB converter cable included
Measures from 0.025 to 19.999" (0.63 to 500 mm)
0.042 to .5511 in/μs (1250 to 14,000 m/sec)
1Wc2u.s5t"omHv4e.lo5c"ityDs1e.t2ti4n"g / 10 oz

Gas/Oxygen Burning Station

SPECIFICATIONS Burning Station
Item # Oxygen/Acetylene, Oxygen/Natural Gas, Oxygen/Propane
Available in 3 Gas Configurations W1-13/04-"3, /14"" H 60" D 19-1/2" / 150 lbs approximate
DInilmet.s/W eight

Argon Manifold

SPECIFICATIONS
Item # Argon Manifold
DPoimrtesn sions W8 54" x H 20" x D 10"

Weld Purge Monitor

SPECIFICATIONS HPP5
Item #
BMreaansdu ring Range Pipe Purge Masters
BHBDDSoaaoiimsuttspttne.eel/adWrrTyyy ye Lpigiefhe t 5 – 999 ppm
7 VDC, 2850 mAh rechargeable batteries
4 hrs
Graphic display screen changes color relative to process and function
Programmable sound function
LLo1w1"pxerWme5a"bxiliHty measuring hose for accurate measurements
2" / 2 lbs

Welder Power Distribution Box

• Provides additional auxiliary power from your welder to the job-site

SPECIFICATIONS 10660
Item # Dependent on welder
Input Capacity Distributes 120 V, 20 amp receptacles
Secondary Power (4) 120 volt, 20 amp receptacles Individually protected
G.F.C.I Receptacles UL Listed
Certifications H 11-1/2" L 16" W 12" / 29 lbs
Dim. / Weight

LISTED

29

ONSITE WELD CONNEX 3 STATION

Save money and time by positioning a Weld Testing Facility directly on your jobsite. Available in two portable configurations – a three
booth shipping container and an eight booth trailer – our fully loaded testing facilities allow quality control personnel to inspect a
welder’s work with a coupon bender to determine if it meet job-site requirements. Contact your sales representative or our customer
service team to learn more.

3 Station Connex

Argon Inlet with Dual Drops for Purging XMT® 350 FieldPro™

Mixed Gas Lines MIG Feeder
LED Lights

Exhaust Fan
300 lb Rod Oven

Coupon Bender Primary Power Inlet
Bench Grinder Compressed Air Line Fume Extractor Grinder Holder (480/3 Phase, 100 Amp)
Tungsten Grinder
Weld Table

30 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

ONSITE WELD TESTING 8 STATION (2) Primary Power Inlet (480/3 Phase, 100 Amp)
Office Area (Quality Control)
8 Station Trailer File Cabnet
Desk
Argon Inlet with Dual Drops for Purging
Mixed Gas Lines
XMT® 350 FieldPro™
LED Lights
Exhaust Fan
Safety Gate

Coupon Portable Air Compressor
Bender Aluminum Steps Generator
Bench Grinder 8 Welding Curtains
Tungsten Grinder
300 lb Rod Oven Grinder Holder
Weld Table MIG Feeder
Compressed Air Line
Fume Extractor

53’ Connex
Video

011

31

POWER DISTRIBUTION

SPLITTER

Heavy Duty Power "Y" Splitter

SPECIFICATIONS 4400-6465-6485
Item #

Splitter Type Style 2 4/4 SOOW "Y" Splitter
Generators
For Use With Inverter Welders
Power Distribution Panels
Amperage 60A
Voltage 600V

POWER DISTRIBUTION

30 KVA Power Distribution Panel, 480/3 Phase

• Circuit breaker is mounted in a stainless steel, weather tight enclosure with a viewing window

SPECIFICATIONS SP-30
Item #

Primary Voltage 100 amp circuit breaker
480/3 phase
Transformer 30 KVA
Secondary Power Distributes 120 and 208 V, 1 phase power

(10) 120 volt, 20 amp Hubbell G.F.C.I. duplex receptacles
Duplex Receptacles All connected to 20 amp Hubbell G.F.C.I. circuit breakers
Spring back, weather proof covers
For use with power tools and portable lighting
(2) 120/208 V, 50 amp Hubbell twist-lock receptacles
Twist-Lock Each connected to 50 amp G.F.C.I. circuit breakers
Receptacles For use with SPB-6 "Spider Box" portable power center
Spring back, weather proof covers
Certifications NEMA 3R certified
UL Listed
Portability Mounted on a (2) wheel cart
Two lifting eyes on the top rear
LISTED Dim. / Weight H 57-1/2" L 33" W 29-1/2" / 435 lbs

30 KVA Power Distribution Panel, 600/3 Phase

• Circuit breaker is mounted in a stainless steel, weather tight enclosure with a viewing window

SPECIFICATIONS SP-35
Item # 100 amp circuit breaker
Primary Voltage 600/3 phase
30 KVA
Transformer Distributes 120 and 208 V, 1 phase power
Secondary Power (10) 120 volt, 20 amp Hubbell G.F.C.I. duplex receptacles
All connected to 20 amp G.F.C.I. circuit breakers
Duplex Receptacles Spring back, weather proof covers
For use with power tools and portable lighting
(2) 120/208 V, 50 amp Hubbell twist-lock receptables
Each connected to 50 amp G.F.C.I. circuit breakers
Twist-Lock For use with SPB-6 "spider Box" portable power center
Receptacles Spring back, weather proof covers
UL Listed and NEMA 3R certified
Certifications Mounted on a (2) wheel cart
Portability Two lifting eyes on the top rear
H 57-1/2" L 33" W 29-1/2" / 435 lbs
Dim. / Weight

LISTED

33

POWER DISTRIBUTION

45 KVA Power Distribution Panel, 480/3 Phase

SPECIFICATIONS
Item # SP-45

Primary Voltage 100 amp circuit breaker
Transformer 480/3 phase
Secondary Power 45 KVA
Distributes 120 and 208 V, 1 phase power
(10) 120 volt, 20 amp Hubbell G.F.C.I. duplex receptacles
D uplex Receptacles All connected to 20 amp G.F.C.I. circuit breakers
Spring back, weather proof covers
For use with power tools and portable lighting
(2) 120/208 V, 50 amp Hubbell twist-lock receptacles
Twist-Lock Each connected to 50 amp G.F.C.I. circuit breakers
Receptacles For use with SPB-6 "Spider Box" portable power center
Spring back, weather proof covers
Certifications UL Listed and NEMA 3R certified
Portability Mounted on a (2) wheel cart, two lifting eyes on the top rear
Dim./Weight H 57-1/2" L 33" W 29-1/2" / 600 lbs
LISTED

75 KVA Power Distribution Panel, 480/3 Phase

SPECIFICATIONS SP-75
Item #

Primary Voltage 100 amp circuit breaker
Transformer 480/3 phase
Secondary Power 75 KVA
Distributes 120 and 208 V, 200 amp, 1 phase power
(4) 120 volt, 20 amp Hubbell G.F.C.I. duplex receptacles
Duplex Receptacles All connected to 20 amp G.F.C.I. circuit breakers
Spring back, weather proof covers
For use with power tools and portable lighting
(6) 120/208 volt, 50 amp Hubbell twist-lock receptacles
Twist-Lock Each connected to 50 amp G.F.C.I. circuit breakers
Receptacles For use with SPB-6 "Spider Box" portable power center
Spring back, weather proof covers
Portability Mounted on a 4-wheel cart, swivel casters, one lifting eye on each corner
Certifications UL Listed and NEMA 3R certified
LISTED Dim./Weight H 52-3/4" L 48-1/2" W 27-1/2" / 1040 lbs

45 KVA Welder Power Distribution Panel, 480/3 Phase

SPECIFICATIONS
Item # SP-45-W

Primary Voltage 480/3 phase, 200 amp circuit breaker
Transformer 45 KVA
Secondary Power Distributes 120 and 208 V, 1 phase power
(10) 120 volt, 20 amp Hubbell G.F.C.I. duplex receptacles
Duplex Receptacles All connected to 20 amp G.F.C.I. circuit breakers
Spring back, weather proof covers
For use with power tools and portable lighting
(2) 120/208 V, 50 amp Hubbell twist-lock receptacles
Twist-Lock Each connected to 50 amp G.F.C.I. circuit breakers
Receptacles For use with SPB-6 "Spider Box" portable power center
Spring back, weather proof covers
Portability Mounted on a 4-wheel cart, swivel casters, one lifting eye on each corner
(8) 480 V, 60 amp 4-pin receptacles
4-Pin Receptacles Each connected to 3-pole, 50 amp circuit breakers
Screw-on weather proof covers
Certifications UL Listed and NEMA 3R certified
LISTED Dim. / Weight H 54" L 53" W 30" / 835 lbs

34 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

POWER DISTRIBUTION

Portable Power Distribution Panel, 480/3 Phase

SPECIFICATIONS SP-480304
Item # 480 volt, 100 amp
Input Power Distributed among (4) 30 amp Hubble receptacles
Main Breaker 30 amp breakers
Circuit Breaker Stainless steel enclosure viewing panel
NEMA 3R Certified and UL Listed
Mounted on a (2) wheel cart
Certifications H 53" L 20" W 30" / 362 lbs
Portability
LISTED Dim./Weight

Portable Generator Distribution Panel, 480/3 Phase

SPECIFICATIONS SP-400-4G
Item #
ICRneapcmuetpLPtooaccwklee sr
480 volt, 3 phase
(5) cam lock receptacles w/ flip covers
color coded in brown, orange, yellow, white, and green
PCH DRoeeiumrcrbtte.bai/fpWebictlilaelaiWtcitgyiloee hnlstd s i ng U(MHEH4aBL)o6cL4uLh448ni"sc10teto0evdn0LodnRol3teSan,0cn21a"tdWe0(d02Nw)Wta-EowemMa13hpt00eAh0He"e3lruapcRbm/rabocrpteo2e,,lfl3r3ttcww4-iofpoielveoble1ddlser0ins"4g8flr0aetcVfeArepCetabwcrhleeeaseklesrs
Can be used w/ diesel generator

Cam Lock receptacles with Can be used with
color coded plugs generators on page 49
CPG 70 T4F & 125KVA

LISTED

“Spider Box” Portable Power Distribution Center

• Provides additional auxiliary power to your power distribution panel

SPECIFICATIONS
Item # SPB-6
Power Supply
Secondary Power (1) 250 V, 50 amp feed through receptacle
Distributes 120 V, 1 phase power
Non-G.F.C.I. Receptacles (1) 125/250 V, 30 amp
G.F.C.I. Receptacles (6) 120 V, 20 amp receptacles
Certifications Each G.F.C.I. receptacle has its own breaker panel
UL Listed
For Use With 100 ft power cord (100PCSPB-6)
50 ft power cord (50PCSPB-6)
H 12-1/4" L 24" W 17-1/4" / 34 lbs
LISTED Dim. / Weight

50' and 100' Cables

• 50' and 100' Portable Power Distribution Center Power Cord
Item # 50PCSPB-6
Item # 100PCSPB-6

35

PUMPS

PUMPS

2" Electric Submersible Dewatering Pump

SPECIFICATIONS LB-480
Item #
Discharge Bore
Max Capacity 2"
62.4 ft
Max Head 39 ft
Max Water Temp
Motor Output 104° F
2/3 HP
Phase Single
Cable Length
32 ft Height: 11-1/4"
Dimensions Diameter: 7-11/16"
Cont. Running Water Level 2"
Weight
28 lbs

ACCESSORIES

1-1/2" Pro Series Metallic Double Diaphragm Pump

SPECIFICATIONS 666150-362-C
Item # 1-1/2"
Inlet/Outlet Size 90 gpm
Flow Rate 150° F
Max Temp 3/32"
Max Suspended Solid Sizes 120 psi
Max Operating Pressure 1/4"
Max Solid Diameter 1/2" FNPT
Air Inlet Single
Manifold Connection 1" a.n.s.i. polypropylene threads (1 piece manifold)
Fluid Connection Dry: 10 ft Wet: 15 ft
Self Priming Ball
Valve Type Diaphragm: Nitrile
Material 52 lbs
Weight

ACCESSORIES

Thermoid AIR POWER™
Jackhammer Air Hose,
3/4" x 5 ft

37

PUMPS 2" & 3" Gas Engine Powered Trash Pump

EPT3-50HA SPECIFICATIONS EPT3-50HA EPT3-80HA
EPT3-80HA Item #
Max Capacity 190 gpm 360 gpm
Max Head 90 ft 96 ft
Impeller Material High Chrome Iron Casting High Chrome Iron Casting
Volute Casting Material Cast Iron Cast Iron
Wear Plate Material Stainless Steel Stainless Steel
Pump Casting Material Cast Aluminum Cast Aluminum
Discharge Connection 2" NPT Coupling 3" NPT Coupling
Suction Connection 2" NftP T Coupling 3" NPT Coupling
Max Suction Lift 26 26 ft
Engine Brand Honda Honda
Engine Model G5.X51h6p0 / 3600 rpm 8G.X02h4p0/ 3600 rpm
Engine Max Output 0.95 gal 1.6 gal
Fuel Tank Capacity 3L.233h-1r/(4c"onWtin1u8o-u1s/4) " H 17-3/4" L3.227h-1r/(2c"onWtin2u0o-u1s/8) " H 25-5/8"
Run Time Per Tank 82 lbs 136 lbs
Dimensions
Weight

Pump Accessories

2" Accessories 3" Accessories
Item # Description Item # Description

Strainer 2 in 2" Strainer Strainer 3 in 3" Strainer
G200-G-BU 2" Cam Loc Gasket G300-G-BU 3" Cam Loc Gasket
G200-A-AL 2" Male Cam Lock x 2" FNPT G300-A-AL 3" Male Cam Lock x 3" FNPT
G200-D-AL 2" FNPT x 2" Female Cam Lock G300-D-AL 3" FNPT x 3" Female Cam Lock

#Strainer 2 in #G200-G-BU #G200-D-AL #G200-A-AL #Strainer 3 in #G300-G-BU #G300-D-AL #G300-A-AL

2" Discharge Hoses 3" Discharge Hoses
Item # Description Item # Description

1148-2000-50-CE 2" x 50' Blue Discharge Hose w/Cam Lock Fittings 1148-3000-50-CE 3" x 50' Blue Discharge Hose w/Cam Lock Fittings
1148-2000-50-NPSH 2" x 50' Blue Discharge Hose w/NPT Fittings 1148-3000-50-NPSH 3" x 50' Blue Discharge Hose w/NPT Fittings
3200-2x50CE 2" x 50' Mill Hose w/Cam Lock Fittings 3200-3x50CE
3" x 50' Mill Hose w/ Cam Lock Fittings

#1148-2000-50-CE #1148-2000-50-NPSH #3200-2x50CE #1148-3000-50-CE #1148-3000-50-NPSH #3200-3x50CE

2" Suction Hoses 3" Suction Hoses
Item # Description Item # Description

SUCTION HOSE 2IN 2" x 20' Suction Hose w/NPT Fittings SUCTION HOSE 3IN 3" x 20' Suction Hose w/NPT Fittings
7901-2X20CN 2" x 20' Suction Hose w/Cam Lock Fittings 7901-3X20CN 3" x 20' Suction Hose w/Cam Lock Fittings

#7901-2X20CN #7901-2X20CN #7901-3X20CN #7901-3X20CN

38 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

PUMPS

Mobile Diesel Surface Pump, 2250 GPM Max Capacity

SPECIFICATIONS CPP 6-74 T4F KD
Item #
WEEMEEE#EEMDFMMUunnFnnnniSEeaaaameFggggggixxxxnE.gliiiiiiegnnnnnnMCCHESnhnieeeeeegtnnooeasa iegRSCSMSliapnxniodidtttas PoeCnonaaasu coMesdrrynEimHltt tlediPmiiynTnTnalpa ogyygdintrswpp idedosVeerelniSois orn lp ntgaes ge de 2E33E74LV2K17L142.4ia2602Ploqe5i,1nr057%0AhcuHVi5a0g08ltif0eTPdbr5atrU"iricllpee/wlKSbhmrWiDsrt4ghIFp72r6ma5"d0i4aHTto7Cr2R"

Pump Accessories

6" Accessories Description
6" Strainer
Item # 6" Cam Loc Gasket
STR-RH600 6" Male Cam Lock x 6" FNPT
600-G-BU 6" FNPT x 6" Female Cam Lock
G600-A-AL
G600-D-AL

#STR-RH600 #600-G-BU #G600-D-AL #G600-A-AL

6" Discharge Hoses
Item # Description

DPX600-50CE 6" x 50' Blue Discharge Hose w/Cam Lock Fittings
DPX600-50MF 6" x 50' Blue Discharge Hose w/NPF Fittings
1131-6000-50-CE 6" x 50' Mill Hose w/Cam Lock Fittings

#DPX600-50CE #DPX600-50MF #1131-6000-50-CE

6" Suction Hoses Description
6" x 20' Suction Hose w/NPT Fittings
Item # 6" x 20' Suction Hose w/Cam Lock Fittings
1240-6000-20
SP600-20CN

#1240-6000-20 #SP600-20CN

39

COMPACTION

TRENCH ROLLER

Radio Controlled Trench Roller

• Superior Compaction: With an operating weight of around 1.6 tons, this multi-purpose compactor achieves
outstanding compaction results on soil compaction in trenches, sewers and on pipeline construction.

• Reliable Radio Control: With radio/cable remote control, problems caused by intense sunlight,
shoring work, or the simultaneous use of other machines are eliminated.

• Built-In Safety: The fully encased exciter housing prevents water and dirt ingress, as well as
abrasion to the hydraulic hoses.

• Safe Response: If the operator enters into the close vicinity of the machine, the travel system is
automatically stopped by BOSS (BOMAG Operator Safety System) to prevent accidents. Nothing
could be safer.

• Quickly Extended: The original BOMAG drum extender allows you to adapt the working width
from 24 to 34 inch in just minutes.

SPECIFICATIONS

Item # BMP 8500
DDDEFVDCSEHAMEEECuinnmnntmreorrorbaauuuieggggnrovrxirpmmmslsiiiiateltnnnnlireCFistinnieeeetSipioSDfWaougoguyorDRNMhpidnngiwasMDwdeaeaeiaotmFsRatlcee tetellhdpreraivemtreTTFtd eldh itatyoqhocli eo ncSrSuierrcqdegcp e pku me enene eceee dydns ts 6122T1E462WHK21FF1"6,.60.59irrluyee563aoo0...dbrci2f564tnnn0mgterot40"/ottrharlt3r::pibsacFlvpp08hstpimaDn,.m00ta1i02cl0200"l5bRf eRaer:a0r:.01464,0"00 lbf
Gradeability With Vibration: 45% Without Vibration: 55%
Ground Clearance 8.7"
Dimensions / Weight H 50" L 62" W 33" / 3517 lbs

Direction Vibratory Plate

These compact, versatile units are indispensable for day-to-day use on the most frequent
applications in repair and maintenance works, earthworks, asphalt and paving.

• Quickly Filled: The removable water tank on the BP series has a larger capacity and is even
equipped with a level indicator.

• Easily Handled: The transport handles guarantee a safe grip on all models for loading.

SPECIFICATIONS BVP 18/45
Item #
Working Width 17.7"
Working Speed 82.0 ft/min
Max Gradeability 30%
Fuel Gas
Fuel Capacity 0.8 gal
Average Fuel Consumption 0.3 gal/hr
Max Dimensions / Weight H 21.1" L 43.9" W 17.7" / 201 lbs

5-1/2" Stroke Rammer/Tamper

SPECIFICATIONS MP-6T
Item #
SSttyrolek e 5F-lo1o/2r "
Blows Per Minute 750
Bore 1-1/2"
ICnFleMt 13/82" NPT
Recommended Hose Size 1/2"
Ternination Size T Taper Butt
Termination Size 2 6" Steel Butt
Length / Weight 49" / 39.5

41

CONCRETE

CONCRETE GRINDERS

Crete-Planer™ 8" Walk-Behind Scarifier, Gas

SPECIFICATIONS CPM-8-9H
Item #
Working Width 8"
Production Rate Scarify: 350-500 sq ft per hour at 1/8" depth per pass
Traffic Line Removal: 800-1000 lineal feet per hour
RAHmPorMpsee rpaogwee r 91291H.58P0
Belts Cgd “V” Belts
Dimensions / Weight L 35" W 20" H 39" / 220 lbs

Magna-Trap® 10" Turbo Concrete Grinder, Electric

SPECIFICATIONS
Item # TG-10-5
Working Width 10"
HProordsuepctoiownerR ate 400-500 sq ft per hour at 1/16" depth per pass w/ segmented diamond disc
5 HP
Phase 3
Amperage 12/6
DBRePimlMtes n sions / Weight S1L5t4d030""V"WBe2lt1s" H 37"
/ 208 lbs

Magna-Trap® 22" Wedge-Less Dual-Disc Floor Grinder, Gas

SPECIFICATIONS
Item # 2GC-NC-11H
Working Width
22"
Production Rate 400 – 500 sq ft per hour at 1/32" depth with EDCO Dyma-Serts
Horsepower 11 HP
RPM 562
Belts
Std "V" Belts
Dimensions / Weight L 46" x W 27" H x 37" / 282 lbs


CONCRETE VACUUM

Vortex 200-CFM Hepa 2.0 Vacuum, 9 Gallon

SPECIFICATIONS ED33125HCONK
Item #
Standard
Capacity Meets and Exceeds OSHA Respiratory Standards
CFM 9 Gallon
Power Source 200
Electric
Horsepower 3.2 HP, Dual Motors
Phase
Amperage Single
Filter Area 16
13 sq ft filter area
Filter Type Micro Clean Filter paired with a HEPA 2.0 Filter
M ILnifcatltuCedroiealudl m n C29C57ao"snfttn,-ec2co"tmodripaomseitteermhaoteserial
Dimensions / Weight L 32" x W 21" x H 35" / 99 lbs

43

CONCRETE GRINDERS Magna-Trap® 22" Wedge-Less
Dual-Disc Floor Grinder, Gas
Magna-Trap® 10" Turbo
Concrete Grinder, Electric Using EDCO’s exclusive Leveling
Equipped with a rounded shroud, this System you can adjust the machine’s
EDCO Grinder allows you to grind within height, use a wide range of accessories,
1/2” of any vertical surface and also and grind level every time. Level grinding
provides better dust control makes your job quick, and increases
accessory production throughout the
grinding process.

44 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

CONCRETE VIBRATORS

1.2 HP Electric Concrete Vibrator

SPECIFICATIONS 1.2 0Z
Item # 1.2 HP electric motor
Motor Type 115 V, 13 amp
Max Head Dia. 1-3/4"
Vibrations Per Minute 10,000

1.5 HP Electric Concrete Vibrator

SPECIFICATIONS 1.5 Style N
Item # 1.5 HP electric motor
M otor Type 115 V, 9 amp
Max Head Dia. 1-3/4"
Vibrations Per Minute 10,000

MORTAR MIXER

Plaster/Mortar Mixer

SPECIFICATIONS WM70SE
Item #
Drive System
Drum Capacity V-Belt
1.5 to 2.5 bags
Dump Type 7 cu ft
Manual
Discharge Height 21"
Drum Type
Drum Thickness Steel
Engine Cover Thickness 10"
Tire Size 14"
B78x13
Frame Size Tubular
Paint Type
Power Source Powder coat
Baldor 1.5 HP single phase, 115/230 V
Electric
Dimensions/Weight L 98" W 50" H 55" / 690 lbs
Overall Height w/ Dump Height: H 73"

45

LIGHT TOWERS

ELECTRIC LIGHT TOWERS
160 Watt x 4 Lamp Electric Light Towers

• Latest LED light technology
• Red Rock PE canopy
• Easily to transport due to compact size
SPECIFICATIONS
Item # CPLT E3 LED
Light Coverage 32,300 ft² (10 lux average)
Flood Lights 4 high efficiency LED flood lights
Flood Light Wattage 160 W x 4 lights
Mast Type Vertical, manual, non-rotating, 4 stabilizers, 51 mph max wind speed,
Enclosure 23 ft max height
Frame Specs Red Rock PE canopy
Spillage free frame
Power Source Electric, powered by CPPG Generator and mains. Can daisy chain
3 units together.
T ransportability Compact (32 units per truck), forklift pockets,
Rated Frequency lifting eye, wheels and handle kit
60 Hz
Rated Voltage 120 VAC
Can daisy chain Dimensions / Weight 48" L x 32" W x 84" H (23 ft with mast fully extended) / 551 lbs
3 units together

DIESEL LIGHT TOWERS

320 Watt x 4 Lamp Diesel Light Towers

SPECIFICATIONS NLPROV-K1005C
Item #
Engine Brand / Model Kubota / D1105
Engine Prime Power (kW)** 7
Fuel Capacity 47 gal
Light Type-LED
LED Wattage (per lamp) (4) Two LED, 5000º K color temperature
320
LED Lumens (per lamp / total) 38,500 / 154,000
Operating Time 155.2 hrs.
Standard 20 A 120 VAC duplex GFCI / 30 A 240
Outlets VAC 4-Wire Twist Lock (NEMA L14-30R) /
30 A 120 VAC RV (NEMA TT-30R)
Weight 2,200 lbs
Dimensions L x 120.3" W x 100.6" H (26.6 ft with mast fully extended)

Reversable Coupler
Adjustable height
2" ball / 3" pintle

47

GENERATORS

MOBILE DIESEL GENERATORS

Mobile Diesel Generators

The CPG generator range was designed to meet the tough demands of the construction industry.

• Battery cut off switch and charger • CAM lock panel
• External fuel connections • Skid mounted
• Synthetic 0W40 oil and block heater • PMS paralleling management system
• Hydraulic brakes for US Dot trailer • CSA approved
• Inlet shutdown valve

CPG 25 T4F SPECIFICATIONS

Model CPG 25 T4F CPG 45 T4F CPG 70 T4F 125KVA
60
Rated Frequency Hz 60 60 60
100 / 125
Rated 3PørimekwPo/ wkVeAr 20 / 25 36 / 45 56 / 70
(RPR) 110 / 138

(REaStPe)d3Søtaknwdb/ ykVPAower 22 / 28 40 / 50 60 / 75 0.8
480Y / 277
3ø Power Factor 0.8 0.8 0.8
240 / 120
(3SøeVrioelstaSgtearSww/itNcheuPtorasli)t ion 480 / 240 -208 V 480 / 2 40-208 V 480 / 240-208 V 73 dB(A)


1ø Voltage Switch Position 240 V / 120 V 240 V / 120 V 240 V / 120 V
(Zig-Zag)

Max. Sound Pressure Level 67 dB(A) 67 dB(A) 67 dB(A)
(LPA) @23', 75% Load
CPG 45 T4F
CPG 70 T4F FUEL CONSUMPTION

Fuel Tank Capacity 72.5 gal 72.5 gal 110 gal 166 gal
1.63 gal/h 2.76 gal/h 3.95 gal/h 7.06 gal/h
Fuel Consumption at Full Load
(PRP)

Fuel Autonomy 75% Load 46 hr 30 hr 34 hr 26.4

ENGINE

Model Isuzu Isuzu Isuzu John Deere
US EPA Family
US EPA Tier ESZXL02.2ZTB ESZXL02.2PXB HSZXL03.0RXB MJDXL0.4.5311
Speed
Tier Final Tier Final Tier Final Tier 4 Final
ALTERNATOR
1800 rpm 1800 rpm 1800 rpm 1800 rpm

Model Leroy Somer Leroy Somer Leroy Somer Leory Somer
40 M5 42.3 S5 43.2 LB 44.3 S5

Excitation System AREP AREP AREP AREP

Automatic Voltage Regulator Leroy Somer Leroy Somer Leroy Somer Leroy Somer
(+/-0.5%) R438 R438 R438 R438

Insulation Class H Class H Class H Class H

DIMENSIONS AND WEIGHT w/ TRAILER

Length 121.5" 121.5" 136" 162"

Width 57" 57" 65" 68"

Height 75.5" 75.5" 75" 86"

Weight w/ Trailer 2,635 lbs 2,785 lbs 3,690 lbs 6,485 lbs

More i1nf2o5oKnVnAext page

125KVA

See Page 35 for
Generator Distribution

Panel SP-40-4G

49

MOBILE DIESEL GENERATORS

• Battery cut off switch and charger • CAM lock panel
• External fuel connections • Skid mounted
• Synthetic 0W40 oil and block heater • PMS paralleling management system
• Hydraulic brakes for US Dot trailer • CSA approved
• Inlet shutdown valve

SPECIFICATIONS 125KVA ENGINE
Model
Model John Deere
Rated Frequency Hz 60 US EPA Family MJDXL0.4.5311
kw 100
100 / 125 US EPA Tier Tier 4 Final
Rated 3PørimekwPo/ wkVeAr Speed
(RPR) 110 / 138 1800 rpm

(REaStPe)d3Søtaknwdb/ ykVPAower 0.8 ALTERNATOR
480Y / 277
3ø Power Factor Model Leory Somer
240 / 120
3(SøeVrioelstaSgtearSww/itNcheuPtorasli)t ion 73 dB(A) 44.3 S5
Excitation System AREP
166 gal Automatic Voltage Regulator Leroy Somer
1ø Voltage Switch Position 7.06 gal/h
(Zig-Zag) (+/-0.5%) R438
Insulation
Max. Sound Pressure Level Class H
(LPA) @23', 75% Load
DIMENSIONS AND WEIGHT w/ TRAILER
FUEL CONSUMPTION
Fuel Tank Capacity Length 162"
Width 68"
Fuel Consumption at Full Load Height 86"
(PRP)

Fuel Autonomy 75% Load 26.4 Weight w/ Trailer 6,485 lbs

Traditionally in prime power applications, you choose a single generator with enough power
output to operate all of the tools and equipment needed on a jobsite. However, operating several
smaller generators in parallel might be a more efficient and versatile solution.

Paralleling is when two or more generators are electrically coupled together using special
equipment to form a larger capacity power source. If the two generators are the same size, it
effectively doubles the power output.

Utility

Paralleling Cable Connections Critical Load Non Critical
Load
Automatic
Transfer
Switch

Manual
Transfer
Switch

Power Distribution
I-line Panel

See Page 35 for
Generator Distribution

Panel SP-40-4G

50 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com