2023 Superior Catalog

ELECTRIC WINCHES

1,000 LB Standard Electric Winch-Hoist

SPECIFICATIONS 100AB
Item #
 TOP VIEW
Long lift applications FRONT VIEW
Applications Multiple story construction site work SIDE VIEW

Pull rolling loads up to 25,000 lbs  TOP VIEW
Tower erection and maintenance FRONT VIEW
Capacity SDionugbleleLLininee: :12,1,00000lblbss SIDE VIEW
Storage 113///481""6 " 1,000 ft
Drum 450 ft 151
250 ft
5/16" 150 ft
P ower •• URenviveerrssiballe118.,25500hprpbmrake motor
Power Source 15 ft power cord plugs into any
115 V AC grounded outlet
No Load 6 amp
Full Load 11,400am0 lpbs 1-2 layers of cable


(39 ft of 1/4" cable)
850 lbs 3 layers of cable

Lifting Capacity 6(6050ftlbosf 1/4" cable) cable
full drum of
(250 ft of 1/4" cable)
Incline Max Load Weight

RP uolllliinngg CLoaap da city 1240000%%%%––––(0(((162) 1º2)ºº )) 25,000 lbs
60% – (31º) 8,000 lbs
80% – (39º) 4,000 lbs
100% – (45º) 2,100 lbs
Weight 76 lbs 1,500 lbs
1,300 lbs
1,100 lbs

3,000 LB Max Electric Winch-Hoist

SPECIFICATIONS
Item # AC36B

Ideal for in-plant use
Applications Installation of elevator equipment

Lifting motors and heavy apparatus
Moving equipment
Capacity SDionugbleleLLininee: :36,0,00000lblbss
315///481""6 " 250 ft
Drum Storage 160 ft
110 ft

Power •• RUenviveerrssiballe118.,25500HrPpmbrake motor
Power Source 15 ft power cord plugs into any
No Load 115 V AC grounded outlet
Full Load 6 amp
14 amp
3,000 lbs 2 layers of cable
2(5,465ft0olbf s5/316la"ycearsbloef) cable
Lifting Capac ity (100 ft of 5/16" cable)
2,150 lbs full drum of cable
I(1n6c0linfteo f 5/16" caMbalex) Load Weight

PR uolllliinngg CLoaap da city 2140000%%%%––––(0(((162) 1º2)ºº )) 75,000 lbs
60% – (31º) 24,000 lbs
80% – (39º) 12,200 lbs
W eigh t 100% – (45º) 6,400 lbs
132 lbs 4,600 lbs
3,800 lbs
3,300 lbs

151

AIR TUGGERS

SPECIFICATIONS 1,100 LB 2,500 LB 2,500 LB 3,000 LB
Item # 4,400 LB

Drum Short Short Long Long Long
Brake Manual Brake Auto Brake Auto Brake Manual Brake Auto Brake
Line Speed
at Capacity 62 ft/min 150 ft/min 150 ft/min 150 ft/min 62 ft/min

213 ft of 1/4" 737 ft of 3/8" 1,520 ft of 3/8" 1,445 ft of 3/8" 952 ft of 7/16"
Cable Capacity 147 ft of 5/16" 411 ft of 1/2" 852 ft of 1/2" 813 ft of 1/2" 768 ft of 1/2"
253 ft of 5/8" 524 ft of 5/8"
Air Inlet Thread 3/4" 1" 1" 1-1/4" 1"

Hose Size 1" 1" 1" 1" 1"

Average Air 71 cfm 175 cfm 175 cfm 191 cfm 191 cfm

Cons. @ 90 psi 654 lbs
Weight w/o Rope 97 lbs 490 lbs 562 lbs 598 lbs

DIMENSIONS 1,100 LB 2,500 LB 2,500 LB 3,000 LB 4,400 LB

Item # 21.10" 32-7/8" 40-15/16" 40-15/16" 40.55"
A 4.49" 7-1/8" 15-3/16" 15-3/16" 14.02 "
B 12.68" 22-5/16" 30-3/8" 30-3/8" 28.03"
C 3/4" 1-1/4" 1-1/4" 1-1/4" 1"
D Air Inlet Pipe Tap 3/4" 1-1/2" 1-1/2" 1-1/2" 1-1/2"
E Exhaust Pipe Tap 9.6" 18-1/4" 18-1/4" 18-1/4" 23.35"
F

ALL TUGGERS ARE EQUIPPED WITH SAFETY GUARDS

153

AIR TUGGERS

SPECIFICATIONS 5,000 LB 6,600 LB 10,000 LB 11,000 LB 22,000 LB
Item #
Drum Short Long Long Long Long
Brake Auto Brake Auto Brake Manual Brake Auto Brake Auto Brake
Line Speed
at Capacity 62 ft/min 62 ft/min 55 ft/min 62 ft/min 27.9 ft/min

851 ft of 7/16" 820 ft of 3/4" 820 ft of 73//84"" 1,460 ft of 7/8"
Cable Capacity 755 ft of 7/8" 755 ft of 1,455 ft of 1"
715 ft of 1/2" 1,050 ft of 5/8"
904 ft of 1-1/8"
457 ft of 5/8" 700 ft of 1-1/4"
Air Inlet Thread
1-1/4" 1-1/4" 1-1/4" 1-1/4" 2"
Hose Size 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2"

Average Air 318 cfm 318 cfm 318 cfm 318 cfm 600 cfm

Cons. @ 90 psi
Weight w/o Rope 890 lbs 1,161 lbs 1,550 lbs 1,923 lbs 5,071 lbs

DIMENSIONS 5,000 LB 6,600 LB 10,000 LB 11,000 LB 22,000 LB

Item # 39" 50.43" 58-1/2" 57.44" 74.22"
A 10" 18.19" 24" 23.62" 19.69"
B 25-3/4" 30.32" 31.04" 40.99" 42.19"
C 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4"
D Air Inlet Pipe Tap 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2 min"
E Exhaust Pipe Tap 21-3/4" 28.62" 25.98" 34.72" 41.34"
F

ALL TUGGERS ARE EQUIPPED WITH SAFETY GUARDS

Double, Long Drum Air Tugger Skid Unit with Auto Brake

• (2) 11,000 LB Long Drum Air Tuggers with Auto Brake, which can be used together or independently
• Mounted on a Michigan Pneumatic Tool, Inc. Mounting Skid (MP-W100DD), which places one

tugger at a higher level than the other. The higher tugger allows the operator to pay in or pay
out cable from each tugger without entanglement.

SPECIFICATIONS
SABHAfDSItoeiiiirronnrrraumsggCISkmenlleioee#lnSe nTgTTtisyzluuTeupegghme Tggr ueeepgarrtigdCCoe naarpp aaatcc9ii0ttyypsi MMainx DoublMeM1Da4i1n,x11r,4LAu0--130o11u0m910n//t01428oglAb""lcbcisfrfsmmTugger
MWD ieomiugenhnttsSoioafnfSeskt yidF eatures Protective screen for operator to sit behind
wWhil7e0t"uxggLe9rs5"arxeHin9u3s"e
1,200 lbs

DIMENSIONS Double Drum Air Tugger

Item # 93"
Height 95"
Length 70"
Width 15"
Seat

154 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

WEDGE SOCKETS

S-421T Wedge Sockets

• Wedge sockets assembly includes socket, wedge, pin and wire rope clip

SPECIFICATIONS
Wire Rope Diameter
S-421T Item # 3/8" 1/2" 5/8" 3/4" 1073/580"3 6 10315"0 45 110-315/085"4 110-315/046"3
S-421 TW Item # 1035000 1035009 1035018 1035027
Wedge Only
1035555 1035564 1035573 1035582 1035591 1035600 1035609 1035618

ONuptti&onCaul tGte-4r0It8e2mB#o lt 1092 227 1092236 1092254 1092281 1092307 1092325 1092343 1092372

DIMENSIONS
SI t- e4m21#T DiRaWmoipreeeter Dimensions (in)
A B C D G H J K L P R S T U V

1035000 3/8" 5.69 2.72 81 .81 1.38 3.06 7.80 1.88 .88 1.56 .44 2.13 .44 1.25 1.38
1 035009 1/2" 6.88 3.47 1.00 1.00 1.62 3.76 8.91 1.26 1.06 1.94 .50 2.56 .53 1.75 1.88
1035018 PAT.PEND
GOCUPLIVE5/8" 8.25 4.30 1.25 1.19 2.12 4.47 10.75 1.99 1.22 2.25 .56 3.25 .69 2.00 2.19
BASE
3/4
1035027 3/4" 9.88 5.12 1.50 1.38 2.44 5.28 12.36 2.41 1.40 2.63 .66 3.63 .78 2.34 2.56
GO 1035036 7/8" 11.25 5.85 1.75 1.63 2.69 6.16 14.37 2.48 1.67 3.13 .75 4.31 .88 2.69 2.94
1035045 1" 12.81 6.32 2.00 2.00 2.94 6.96 16.29 3.04 2.00 3.75 .88 4.70 1.03 2.88 3.28
3/4 1035054 1-1/8" 14.38 6.92 2.25 2.25 3.31 7.62 18.34 2.56 2.25 4.25 1.00 5.44 1.10 3.25 3.56
1035063 1-1/4" 16.34 8.73 2.62 2.50 3.56 9.39 20.48 2.94 2.34 4.50 1.06 6.13 1.19 4.62 4.94
GO NOTE: For intermediate wire rope sizes, use next larger size socket.
PAT. PEND
3/4
CUP LIVE
BASE

OVERHAUL BALL ASSEMBLY
PAT. PEND
Overhaul Ball Assembly
CUP LIVE
BASE

SPECIFICATIONS Weight
UB500 “E” Working Load 58 lbs UB500 “E” Working Load Weight
Eye Hook Limit 102 lbs Eye Hook Limit
Item # 162 lbs Item #
201 lbs
1036000* 4 tons 109 lbs 1036144* 12 tons 216 lbs
1036009* 4 tons 170 lbs 1036153* 12 tons 258 lbs
1036027* 4 tons 210 lbs 1036171* 12 tons 365 lbs
1036036* 4 tons 321 lbs 1036180* 12 tons 403 lbs
1036045* 7 tons 216 lbs 1036189* 12 tons 718 lbs
1036054* 7 tons 260 lbs 1036198* 15 tons 298 lbs
1036072* 7 tons 365 lbs 1036207* 15 tons 456 lbs
1036081* 7 tons 403 lbs 1036216* 15 tons 753 lbs
1036090* 10 tons 718 lbs 1036225* 15 tons 1311 lbs
1036099* 10 tons 1036234* 20 tons 298 lbs
1036117* 10 tons 1036243* 20 tons 456 lbs
1036126* 10 tons 1036252* 20 tons 753 lbs
1036135* 10 tons 1036261* 20 tons 1311 lbs
1036270* 25 tons 533 lbs
* Utilizes Crosby “N” style hooks with integrated latch. Replacement 1036279* 25 tons 865 lbs
latch kit is S-4055 latch will not fit. Standard Crosby S-5 Thrust Style 1036288* 25 tons 1421 lbs
Swivels cannot be used with UB500 Overhaul Balls for replacement 1036297* 30 tons 865 lbs
swivels, contact Our Customer Service.

1036306* 30 tons 1421 lbs

SPLIT OVERHAUL BALLS

Split Overhaul Balls

SPECIFICATIONS
Item # 2003822 2003830 2003831 2003832
Wire Rope Sizes
Weight 1/4"-5/16" 3/8" 1/2"-5/8" 5/8" - 3/4" - 7/8"
15 lbs 20 lbs 50 lbs 100 lbs
Ball Diameter 5.06" 5.38" 7.12" 9.19"

155

SWIVELS

S-1 Jaw & Hook

SPECIFICATIONS
Item # Sw#ivel WLLooirmkaidint g RWSoiizpreee Weight
(lbs) Dimensions (in)

(ton s*) (in) A F G H J K L M N O P V
297011 3-S-1 3 1/2 9.81 11.44 4.84 2.75 .75 .88 1.62 1.53 1.41 1.31 1.00 1.44 1.12
2 97217 5-S-1 5 5/8 15.51 13.34 6.28 3.00 .88 1.00 2.25 1.94 1.62 1.12 1.00 1.81 1.44
2 97413 8-S-1 8-1/2 3/4 29.42 16.45 7.54 4.00 1.00 1.56 2.81 2.46 2.22 2.12 1.38 2.25 1.62
297618 10-S-1 10 7/8 46.75 19.75 8.34 4.50 1.50 1.75 3.38 2.59 2.41 3.50 1.75 2.59 1.94
297814 15-S-1 15 1 73.75 22.24 10.34 5.00 1.50 1.75 3.38 2.81 3.19 3.50 1.75 3.00 2.38
298118 25-S-1 25 - 140.00 26.78 13.62 6.00 2.00 2.00 4.62 3.44 3.62 3.69 2.38 3.66 3.00
2 98216 35-S-1 35 - 220.00 29.94 14.06 6.50 2.00 2.00 4.62 3.88 3.75 3.69 2.38 4.56 3.19
2 98314 45-S-1 45 - 251.00 35.06 15.44 7.00 2.25 2.50 5.00 4.75 4.25 4.00 3.00 5.06 3.25

S-2 Jaw & Jaw

SPECIFICATIONS
Item # Sw#ivel Working Wire Rope Weight
Load Limit Size (in ) (lbs) Dimensions (in)
29702 0 3- S-2 (to3n *) B G H J K N O
2.75 .75 .88 1.62 1.31 1.00
1/2 9.63 9.28
297226 5-S-2 5 5/8 13.69 10.31 3.00 .88 1.00 2.25 1.62 1.12
297422 8-S-2 8.5 3/4 26.16 12.62 4.00 1.00 1.56 2.81 2.12 1.38
2 97627 10-S-2 10 7/8 45.75 16.75 4.50 1.50 1.75 3.38 3.50 1.75
2 97823 15-S-2 15 1 62.75 17.12 5.00 1.50 1.75 3.38 3.50 1.75
298127 25-S-2 25 - 140.00 20.75 6.00 2.00 2.00 4.62 3.69 2.38
298225 35-S-2 35 - 155.00 20.75 6.50 2.00 2.00 4.62 3.69 2.38
2 98323 45-S-2 45 - 235.00 25.25 7.00 2.25 2.50 5.00 4.00 3.00

S-3 Jaw & Eye

SPECIFICATIONS
Item # Sw #ivel W(LLtoooirmnkasidi*nt)g RWS(oiinizpr e)ee W e(lbigs)ht
C G H Dimensions (in) R S T
J K N O Q
297039 3-S-3 3 1/2 9.12 9.34 2.75 .75 .88 1.62 1.31 1.00 .75 1.03 1.12 1.25
2 97235 5-S-3 5 5/8 13.50 10.06 3.00 .88 1.00 2.25 1.62 1.12 1.00 1.28 1.25 1.25
297431 8-S-3 8-1/2 3/4 24.90 12.25 4.00 1.00 1.56 2.81 2.12 1.38 1.25 1.41 1.62 1.50
297636 1 0-S-3 10 7/8 43.50 16.12 4.50 1.50 1.75 3.38 3.50 1.75 1.69 1.69 2.75 1.88
2 97832 1 5-S-3 15 1 61.00 16.75 5.00 1.50 1.75 3.38 3.50 1.75 1.94 2.03 2.75 2.12
2 98136 2 5-S-3 25 - 135.00 21.50 6.00 2.00 2.00 4.62 3.69 2.38 2.25 2.31 3.88 2.38
298234 3 5-S-3 35 - 150.00 21.50 6.50 2.00 2.00 4.62 3.69 2.38 2.25 2.31 3.88 2.38
298332 4 5-S-3 45 - 225.00 25.88 7.00 2.25 2.50 5.00 4.00 3.00 2.50 2.53 4.00 3.00

IMPORTANT Contact the wire rope manufacturer for the proper wire rope to be used with Crosby Swivels.

156 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

SWIVELS

S-4 Eye & Jaw

SPECIFICATIONS
Sw#ivel WLLooirmkaiidnt g RWSoiizpreee Weight
Item # (lbs) Dimensions (in)

(to ns*) (in) C G H J K N O Q R S T
2 97048 3-S-4 3
2 97244 5-S-4 5 1/2 9.00 9.34 2.75 .75 .88 1.62 1.31 1.00 .75 1.03 1.12 1.25
2 97440 8-S-4 8-1/2 5/8 12.33 10.06 3.00 .88 1.00 2.25 1.62 1.12 1.00 1.28 1.25 1.25
2 97645 10-S-4 10 3/4 29.00 12.25 4.00 1.00 1.56 2.81 2.12 1.38 1.25 1.41 1.62 1.50
2 97841 15-S-4 15 7/8 44.00 16.12 4.50 1.50 1.75 3.38 3.50 1.75 1.69 1.69 2.75 1.88
2 98145 25-S-4 25 1 61.00 16.75 5.00 1.50 1.75 3.38 3.50 1.75 1.94 2.03 2.75 2.12
2 98243 35-S-4 35 - 135.00 21.50 6.00 2.00 2.00 4.62 3.69 2.38 2.25 2.31 3.88 2.38
2 98341 45-S-4 45 - 150.00 21.50 6.50 2.00 2.00 4.62 3.69 2.38 2.25 2.31 3.88 2.38
- 225.00 25.88 7.00 2.25 2.50 5.00 4.00 3.00 2.50 2.53 4.00 3.00

S-5 Eye & Eye

SPECIFICATIONS RWSoiizpreee
Item # Sw#ivel WLLooirmkaiidnt g Weight
(lbs) Dimensions (in)

(tons* ) (in) D G Q R S T
297057 3-S-5 3 1/2 8.50 9.41 2.75 .75 1.03 1.12 1.25
297253 5-S-5 5 5/8 11.30 9.81 3.00 1.00 1.28 1.25 1.25
2 97459 8-S-5 8-1/2 3/4 29.25 11.88 4.00 1.25 1.41 1.62 1.50
2 97654 10-S-5 10 7/8 42.00 15.50 4.50 1.69 1.69 2.75 1.88
2 97850 15-S-5 15 1 49.00 16.38 5.00 1.94 2.03 2.75 2.12
2 98154 25-S-5 25 - 130.00 22.25 6.00 2.25 2.31 3.88 2.38
2 98252 35-S-5 35 - 145.00 22.25 6.50 2.25 2.31 3.88 2.38
2 98350 45-S-5 45 - 215.00 26.50 7.00 2.50 2.53 4.00 3.00

S-6 Eye & Hook

SPECIFICATIONS
Item # Sw#ivel WLLooirmkaiidntg RWSoiizpreee Weight
(lbs) Dimensions (in)

(tons*) (in) E F G L M P Q R S T V
297066 3-S-6 3 1/2 9.32 11.50 4.84 2.75 1.53 1.41 1.44 .75 1.03 1.12 1.25 1.12
2 97262 5-S-6 5 5/8 14.24 13.09 6.28 3.00 1.94 1.69 1.81 1.00 1.28 1.25 1.25 1.44
297468 8-S-6 8-1/2 3/4 32.00 16.07 7.54 4.00 2.46 2.22 2.25 1.25 1.41 1.62 1.50 1.62
2 97663 10-S-6 10 7/8 45.50 19.12 8.34 4.50 2.59 2.41 2.59 1.69 1.69 2.75 1.88 1.94
297869 5-S-6 15 1 68.00 21.24 10.34 5.00 2.81 3.19 3.00 1.94 2.03 2.75 2.12 2.38
298163 25-S-6 25 - 135.00 27.53 13.62 6.00 3.44 3.62 3.66 2.25 2.31 3.88 2.38 3.00
2 98261 35-S-6 35 - 215.00 30.69 14.06 6.50 3.88 3.75 4.56 2.25 2.31 3.88 2.38 3.19
298369 45-S-6 45 - 270.00 35.69 15.44 7.00 4.75 4.25 5.06 2.50 2.53 4.00 3.00 3.25

* Individually Proof Tested to 2 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit.

ANGULAR CONTACT BEARING SWIVELS

AS-1 Jaw & Hook

SPECIFICATIONS
Item # W(LLtoooirmnka sidin*t)g RWS(oiiniz pre)ee W(elbi gsh) t A B C DDi menEsi ons (Fin ) G H I
Deformation ReLpSaltatoccchekmK#ietnt
Indicator
AA

1 11 1 000011116666000020126510 .45 1/8 .7 .88 .25 .25 .38 .41 4.32 2.86 .93 .73 1.50 1096325
11 11 1 000001111166666000006445756054 .75 1/4 1.5 1.31 .38 .31 .44 .56 5.44 3.16 .97 .84 1.50 1096374
1.5 3/8 2.3 1.63 .50 .50 .69 .78 6.35 4.00 1.16 1.14 1.50 1096374
3.0 1/2 6.5 2.00 .75 .75 .94 1.19 8.69 4.84 1.41 1.44 2.50 1096374
5.0 5/8 12.9 2.50 .88 1.00 1.13 1.53 10.71 6.28 1.69 1.82 3.00 1096562
8.5 3/4 26.4 3.00 1.19 1.56 1.34 2.09 13.65 8.34 2.41 2.60 4.00 1096657
10 7/8 53.0 4.00 1.50 1.75 1.75 3.50 17.95 10.34 3.19 3.00 5.00 1096704
15 1 53.0 4.00 1.50 1.75 1.75 3.50 17.95 10.34 3.19 3.00 5.00 1096704
25 1-1/4 97.0 5.00 2.00 2.00 2.38 3.69 20.88 13.62 3.25 3.62 6.50 1090161
1 016082 35 1-1/2 140.0 5.00 2.00 2.00 2.38 3.69 24.00 14.06 3.00 4.56 7.00 1090189

157

ANGULAR CONTACT BEARING SWIVELS

AS-2 Jaw & Jaw

SPECIFICATIONS
Item # LoWa(otdorknLi*ni)mg it RoWp(einir)Sei ze W(elbigs )ht A B C DiDm ensionsE( in) F G H
1016103
1016114 .45 1/8 .4 .88 2.38 3.13 .38 .25 .25 .19 .41
1016122 .75 1/4 .9 1.31 3.56 4.44 .44 .31 .38 .22 .56
1016131 1.5 3/8 2.0 1.63 4.06 5.44 .69 .50 .50 .28 .78
1 016139 3.0 1/2 4.9 2.00 6.25 8.13 .94 .75 .75 .38 1.19
1016148 5.0 5/8 9.6 2.50 7.75 10.63 1.13 1.00 .88 .53 1.53
1 016157 8.5 3/4 15.8 3.00 9.63 12.31 1.34 1.56 1.19 .56 2.09
1 016166 10 7/8 40.0 4.00 14.00 17.50 1.75 1.75 1.50 .81 3.50
1016175 15 1 40.0 4.00 14.00 17.50 1.75 1.75 1.50 .81 3.50
1016184 25 1-1/4 78.0 5.00 15.94 20.69 2.38 2.00 2.00 1.13 3.69
35 1-1/2 78.0 5.00 15.94 20.69 2.38 2.00 2.00 1.13 3.69

AS-3 Jaw & Eye

SPECIFICATIONS
Item # W(LtLo ooirmnkasidint*)g R WS(oiinizpre)ee W (elbigsh) t Dimensions (in)
A B C D E F G H I J K L
1016205 .45 1/8 .3 .88 2.50 3.25 .25 .19 .25 .38 .41 .25 .25 .38 .84
1016216 .75 1/4 .9 1.31 3.69 4.56 .31 .22 .38 .44 .56 .31 .38 .44 .88
1016224 1.5 3/8 1.9 1.63 4.19 5.44 .50 .28 .50 .69 .78 .50 .66 .63 1.38
1016232 3.0 1/2 4.6 2.00 6.19 8.13 .75 .38 .75 .94 1.19 .75 .91 1.00 2.00
1016243 5.0 5/8 9.1 2.50 7.88 10.19 1.00 .53 .88 1.13 1.50 1.00 1.25 1.19 2.63
1016250 8.5 3/4 15.6 3.00 9.50 12.25 1.56 .56 1.25 1.34 2.09 1.25 1.41 1.50 3.13
1016259 10 7/8 39.0 4.00 13.75 17.31 1.75 .81 1.50 1.75 3.50 1.72 1.63 1.81 4.69
1016268 15 1 40.0 4.00 13.44 17.31 1.75 .81 1.50 1.75 3.50 2.00 2.00 2.13 4.69
1016277 25 1-1/4 78.0 5.00 16.00 20.75 2.00 1.13 2.00 2.38 3.69 2.25 2.31 2.38 5.25
1016286 35 1-1/2 78.0 5.00 16.00 20.75 2.00 1.13 2.00 2.38 3.69 2.25 2.31 2.38 5.2

AS-4 Eye & Jaw

SPECIFICATIONS
Item # LWo(taoodr nkLsiin*m)git R oWp(ienirS)eiz e W(elbigsh) t A
1016306 .45 B Dimensions (in) I J K L
1016314 .75 C D E F G H
1016325 1.5
1016332 3.0 1/8 .3 .88 2.50 3.25 .25 .19 .25 .38 .41 .25 .25 .38 .81
1 016343 5.0 1/4 .9 1.31 3.63 4.56 .31 .22 .38 .44 .56 .31 .38 .44 .88
1 016352 8.5 3/8 1.9 1.63 4.19 5.50 .50 .28 .50 .69 .78 .50 .66 .63 1.34
1 016361 10 1/2 4.6 2.00 6.19 8.13 .75 .38 .75 .94 1.19 .75 .91 1.00 2.00
1 016370 15 5/8 9.1 2.50 7.88 10.19 1.00 .53 .88 1.13 1.44 1.00 1.25 1.19 2.6
1 016375 25 3/4 15.7 3.00 9.44 12.25 1.56 .56 1.19 1.34 2.09 1.25 1.41 1.50 3.13
1 016379 35 7/8 39.0 4.00 14.13 17.75 1.75 .81 1.50 1.75 3.50 1.72 1.66 1.81 4.69
1 40.0 4.00 13.81 17.75 1.75 .81 1.50 1.75 3.50 2.00 2.03 2.13 4.69
1-1/4 75.0 5.00 15.94 20.75 2.00 1.13 2.00 2.38 3.69 2.25 2.31 2.38 5.25
1-1/2 75.0 5.00 15.94 20.75 2.00 1.13 2.00 2.38 3.69 2.25 2.31 2.38 5.25

* Ultimate Load is 5 times the Working Load Limit. Individually Proof Tested to 2 times the Working Load Limit.

AS-5 Eye & Eye

SPECIFICATIONS Dimensions (in)

Item # Working Load WireRope Weight A B C D E F G
Limit (to ns*) Siz e (in) (lbs) .88 2.6 3.38 .38 .25 .25 .81
1016409 .45 1.31 3.75 4.63 .44 .31 .38 .88
11001166441287 1/8 .3 1.63 4.31 5.56 .63 .50 .66 1.34
.75 1/4 .9 2.00 6.13 8.13 1.00 .75 .91 2.00
1.5 3/8 1.8 2.50 7.75 10.63 1.19 1.00 1.25 2.63
1016436 3.0 1/2 4.3 3.00 9.31 12.31 1.50 1.25 1.41 3.13
1016445 5.0 5/8 8.6 4.00 13.88 17.50 1.81 1.72 1.63 4.69
1016454 8.5 3/4 15.4 4.00 13.25 17.5 2.13 2.00 2.13 4.69
11001166446732 10 7/8 37.0 5.00 16.00 20.75 2.38 2.25 2.31 5.25
11001166448901 15 1 39.0 5.00 18.00 20.75 2.38 2.25 2.31 5.25
25 1-1/4 72.
35 1-1/2 72.0

158 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

ANGULAR CONTACT BEARING SWIVELS

AS-6 Eye & Hook

SPECIFICATIONS
Item # Working Wire Weight DIenfdoircmaattoiorn Replacement
Lo(atodn Lsi*m) it SR izoep(ein) (lbs) Dimensions (in) AA Latch Kit
A B C D E F G H Stock #

1111111111000000000011111111116666666666555555555521367250483927306485 .45 1/8 .7 .88 4.36 2.86 .93 .25 .25 .73 .93 1.50 1096325
.75 1/4 1.5 1.31 5.56 3.16 .97 .38 .31 .84 .97 1.50 1096374
1.5 3/8 2.9 1.63 6.22 4.00 1.16 .66 .50 1.14 1.16 1.50 1096374
3.0 1/2 6.2 2.00 8.63 4.84 1.41 .91 .75 1.44 1.41 2.50 1096374
5.0 5/8 12.4 2.50 10.77 6.28 1.69 1.25 1.00 1.82 1.69 3.00 1096562
8.5 3/4 23.5 3.00 13.52 8.34 2.41 1.40 1.25 2.60 2.41 4.00 1096657
10 7/8 52.0 4.00 18.08 10.34 3.19 1.66 1.72 3.00 3.19 5.00 1096704
15 1 53.0 4.00 17.64 10.34 3.19 2.03 2.00 3.00 3.19 5.00 1096704
25 1-1/4 94.0 5.00 20.88 13.62 2.25 2.34 2.25 3.62 3.25 6.50 1090161
35 1-1/2 138.0 5.00 24.00 14.06 3.00" 2.34 2.25 4.56 3.00 7.00 1090189

AS-7 Bullet Style Jaw & Jaw

SPECIFICATIONS Dimensions (in)
Item # WLoimrki itn(gtoLnos*a)d WSiriezeR(oinp ) e W(elbigs)ht A B C D E F G
1111111111000000000011111111116666666666666666666652643516044782912021 ..1385132174....5550550505 .88 2.38 3.13 .38 .25 .31 .40
1/8 .4 1.31 3.56 4.44 .44 .31 .38 .56
1/4 1.1 1.63 4.06 5.19 .56 .50 .44 .81
3/8 1.8 2.00 5.44 7.06 .81 .75 .63 .94
1/2 3.8 2.50 7.75 10.06 1.13 1.00 .88 1.56
5/8 8.0 3.00 9.88 12.38 1.25 1.31 1.00 2.13
3/4 14.5 4.00 13.13 16.75 1.75 1.75 1.50 3.25
7/8 40.0 4.00 13.13 16.75 1.75 1.75 1.50 3.25
1 40.0 5.00 15.94 20.75 2.38 2.00 2.00 3.69
1-1/4 84.0 5.00 15.94 20.75 2.38 2.00 2.00 3.69
1-1/2 84.0

AS-11 Thimble & Jaw

SPECIFICATIONS
Item # WLoimrkiitn(gtoLnos *a)d WSiriezeR(o inp) e W(elbigs)h t A B DCim ensionDs (in) E F G
1017020
1017029 8.5 3/4 18.0 3.00 8.66 13.00 1.34 1.56 1.19 2.09
15 1 42.0 4.00 11.66 17.53 1.75 1.78 1.50 3.50

AS-14 Thimble & Bullet
SPECIFICATIONS
Item # Working Load Wire Rope Weight Dimensions (in)
Limit (ton s*) Size (in) (lbs) A B C D E F G
111000111777222256158 3.00 9.00 13.25 1.25 1.31 1.00 2.13
8.5 t 3/4 20.0 4.00 11.50 17.38 1.75 1.75 1.50 3.25
15 1 40.0 4.00 14.31 21.19 2.38 2.00 2.00 3.69
25 1-1/4 81.0

AS-17 Bullet Style Jaw & Jaw Slurry Swivel

SPECIFICATIONS Dimensions (in)
Item # Working Load Wire Rope Weight A B C D E F G
Limit (to ns*) Siz e (in) (lbs) 3.00 10.13 12.63 1.25 1.31 1.00 2.13
88888000001111133333333334844742635 4.00 13.50 17.00 1.75 1.75 1.50 3.25
8.5 3/4 14.5 5.00 16.16 20.92 2.38 2.00 2.00 3.69
15 1 40.0 5.00 16.16 20.92 2.38 2.00 2.00 2.75
25 1-1/4 84.0 6.00 20.25 26.25 3.00 2.53 2.25 2.75
35 1-1/2 84.0
45 - 150.0

* Ultimate Load is 5 times the Working Load Limit. Individually Proof Tested to 2 times the Working Load Limit.

159

HVAC

CONSTRUCTION HEATERS

Construction Heater

• Engineered for easy operation and minimal servicing
• Electronic direct spark ignition control
• Equipped with 100% flame safeguard system
• Designed for commercial applications
• Just turn the fuel selector valve to change the fuel supply
• Environmentally friendly with minimal combustion impurities
• Temporary heat for construction and maintenance

SPECIFICATIONS
Item # F-1000T
T AHFRIFAPFIDgnuuahoiieeilnrrmeneeewqaiOCttllrt.u MeimCoPiu/iCrrrontcraoeWalRe tuepsdposeetltaaa sraEqic gtcutuqiihiotrCituyertyni e o p mnmtereonnlt t Y1712NSHNTLND1,6yeeiaiaa0H6rg5"psctett01uPhuuicoD0Vc"rrrtnaFiaaaWac/SldilllmfrG6pmHeGGS20eaa:oaa9ttrs1aHesk"ss,,gre::z0HIPeg110/Arn0,03oR01si",8pt00seiP"oaW0e0gnHn0mu.CeCl/bbaF.t/2tlHuyMo0:hri:nAS3Bm5544p6128Rlb0PqPLs-orr 2.oo2w0pp51aa,F-nni11reee/-::41: 1"1/N410x/"".A91NW25P’.GCTP. HMax

PORTABLE AIR CONDITIONERS

Flexible Cooling Solutions – 3.5 Ton 1200 to 1600 sq. ft.

• The ExtraCooler® unit is the ideal solution for almost any cooling crises or need.
• HVAC systems fail creating a need for emergency cooling
• Temporary cooling is needed when primary systems require maintenance.
• Supplemental or after-hours cooling is needed for IT, or key areas.
• Cooling is needed in factories to increase productivity.
• As a portable military grade air conditioning unit, the versatility of the ExtraCooler® is

indispensable.
• Our portable A/C units are easily disconnected and moved to other areas, with no

alteration to your building

SPECIFICATIONS
Item # SCT42CB
Cooling Capacity, BTU/Hr1
41,000
Power Supply2 Volts/Phase/Amps 208-230/1/30
Thermostat Control Digital
Metering Device TX Value
Power Consumption - Cooling, Watts 4,500
Current Consumption - Cooling, Amps 19.7
Recommended Circuit Amps 30
NEMA Plug Type 6-30P
Evaporator CFM, Free Discharge 1,200
Condenser CFM 1,500
Maximum ESP, in WC 0.10
Hot Air Duct Diameter (inches) 14"
Maximum Duct Length, ft. 40
Condensate Removal 5 gal. tank
Condensate-Pump Head, ft. 15
Operating Limits, (min-max) ºF 65-105
Sound level, dB 67
R-410-A Charge oz. 70
Dim. / Weight L 30" W 28" H 51" / 336 lbs

161

PIPE THREADING & FABRICATION

700 POWER DRIVE & ACCESSORIES
Model 700 Hand-Held Power Drive

SPECIFICATIONS
Item # 41935
Model #
700
Pipe Capacity 1/8"-2"
Bolt Capacity 1/4" – 1" (using OO-RB Die Heads)
S witch Double-throw reversible
Switch has spring return to OFF position
Die cast aluminum
G ear Head Hardened steel spindle gear
Spring-loaded adapter pawls
Material Spur gear reduction face gear drive
Dimensions Cast aluminum
Weight L 28-1/4" W 6-1/16" H 7-13/16"
25 lbs

Machine Accessories

ACCESSORIES Description
Item # Model #

418 42620 774 Square Dr. Adapter (15/16")
42625 775 Support Arm for Model 700 Hand-Held Power Drive
10883 418 Oiler with 1 Gallion Premium Thread Cutting Oil
42600 770 Adapter for OO-R and OO-RB

When using the OO-RB die head in the #700 power drive, the #770 adapter must also be used in conjunction.

Model 12-R Die Heads

SPECIFICATIONS Nominal Pipe Size

1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1 -1/2" 2"
National Pipe Taper (NPT )

Alloy RH 37375 37380 37385 37390 37395 37400 37405 37410 37415

High-Speed LH 37435 37440 37445 37450 37455 37460
High-Speed RH 37465 37470 37475 37480 37485 37490 37495 37500 37505

High-Speed for Stainless Steel RH 37510 37515 37520 37525 37530 37535 37540 37545 37550
High-Speed for PVC RH 83450 83455 83460 83465 83470 83475 83480 83485
High-Speed for Plastic Coated Pipe 51857 51862 51867 51872 51877 51882
Alloy for IMC RH 92690 92695 92700 92705 92710 92715
National Pipe Straight Mechanical (NPSM)

Alloy RH 37555 37560 37565 37570 37575 37580 37585 37590 37595

Pipe Dies for Models OO-R, 11-R, 12-R, or O-R Die Heads

SPECIFICATIONS Nominal Pipe Size (Threads Per Inch)
1/8"-27 1/4"-18 3/8"-18 1/2"-14 3/4"-14 1"-11-1/2 1-1/4"-11-1/2 1-1/2"-11-1/2 2"-11-1/2

National Pipe Taper (NPT)

Alloy RH 37810 37815 37820 37825 37830 37835 37840 37845 37850
High-Speed RH 37855 37860 37865 37870 37875 37880 37885 37890 37895
High-Speed LH 37050 37055 38060 37065 37070 38075 38080 38085
H.S. For Stainless Steel RH 37900 37905 37910 37915 37920 37925 37930 37935 37940
H.S. For PVC RH 70685 70690 70695 70700 70705 70710 70715
HS Reversible RH 49707 49712 49717 49722 49727
National Pipe Straight Mechanical (NPSM)

Alloy RH 37945 37950 37955 37960 37965 37970 37975 37980 37985

163

700 POWER DRIVE & ACCESSORIES

Model OO-RB Die Heads

SPECIFICATIONS Nominal Pipe Size

1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 3/4" 7/8" 1"
Unified National Course

20 TPI 18 TPI 16 TPI 14 TPI 13 TP 12 TP 11 TPI 10 TPI 9 TPI 8 TPI
Alloy RH 37610 37615 37620 37625 37630 37635 37640 37645 37650 37655
Alloy LH 37675 37695

Unified National Fine

28 TPI 24 TPI 24 TPI 20 TPI 20 TPI  18 TPI 18 TPI 16 TPI 14 TPI 14 TPI
Alloy RH 37710 37715 37720 37725 37730 37735 37740 37745 37755
Alloy LH 37775 37780 37785 37790 37795 37800 37805

Bolt Threaders Button Dies for Model OO-RB Ratchet Bolt
Threaders

SPECIFICATIONS Rod Diameter (Threads Per Inch)
Unified National Course (UNC)

Alloy RH 1/4"-20 5/16"-18 3/8"-16 7/16"-14 1/2"-13 9/16"-12 5/8"-11 3/4"-10 7/8"-9 1"- 8
38335 38340 38345 38350 38355 38360 38365 38370 38375 38380

Unified National Fine (UNF)

1/4"-28 5/16"-24 3/8"-24 7/16"-20 1/2"-20 9/16"-18 5/8"-18 3/4"-16 7/8"-14 1"-12
Alloy RH 38385 38390 38395 38400 38405 38410 38415 38420 38425 15317

164 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

300 POWER THREADING MACHINES & ACCESSORIES

Model 300 Power Drive

SPECIFICATIONS
Item # 41855
Model # 300 Only
1/4" – 2" Rod
C apacity 1/8" - 2" Pipe
RPM 2-1/2" - 4" with #141
Voltage 4" - 6" with #161 Geared Threaders
Frequency 38
PMPhooawtsoeerr Type 115 V
Switch 50-60 Hz
Chuck 1
Rear Centering Device Universal
Support Bar 1/2 HP
Weight Heavy-duty forward / off / reverse and integral foot switch
RIDGID speed chuck with replaceable rocker-action jaws
Cam-action, turns with chuck
Two heavy-duty
94 lbs

ACCESSORIES Description Weight
Item # Model # 20.5 lbs
10883 10.5 lbs
51005 418 Oiler with 1 Gallon Premium Thread Cutting Oil 13 lbs
819 Nipple Chuck Complete,1/2" - 2" NPT 13 lbs
97065 811A 1/8" – 2" NPT Die Head, Quick-Open RH 31 lbs
97075 815A 1/8" - 2" BSPT Die Head, Self-Opening RH 6.75 lbs
42360 1206 Stand 8.5 lbs
42365 Reamer Assembly
42370 341 Cutter Assembly 3 lbs
360 Lever Carriage Feed Kit 14.25 lbs
42385 312 Transport Cart
42575 32 Reamer Cone LH & RH 7 lbs
46660 E-863 Carriage with Lever 15 lbs
68815 Jaw Insert Set for Plastic Coated Pipe (Pack of 3) 0.5 lbs
97365 311 Clip-On Tool Tray 6 lbs
- Nipple Chuck 1/2" - 2" BSPT 10.5 lbs
418 22638 1452 1/8" - 2" NPT Die Head, Self-Opening RH 12.5 lbs
68160 819 1/8" - 2" BSPT Die Head, Self-Opening RH 13 lbs
97070 811A
97080 815A

Model 300 Power Drive Complete

SPECIFICATIONS 15682
Item #
MDeosdcerlip#t ion
Spindle Speed 300 Complete
115V, 25-60 Hz NPT
38 rpm
Pipe Threading Capacity 1/8" – 2"
RGMoeodatorTerhdTryTephaerde inagdeCraCpaapcaitcyi ty R61"/e4v"e–rs2ib"le 1/2 HP universal motor
Switch Heavy-duty forward / off / reverse and integral foot switch
Chuck RIDGID speed chuck with replaceable rocker-action jaws
SRuepapr oCretnBtearri ng Device HCeaamv-ya-cdtuiotyn, turns with chuck
Weight 218 lbs

ACCESSORIES Description Weight
Item # Model # Stand for 300 Power Drive 31 lbs
42360 Transporter (for Power Drives and Tri-stand Vises) 14.5 lbs
42575 1206 Carriage with No. 312 Lever 15 lbs
68815 32 Oiler with 1 Gallon of Nu-Clear Thread Cutting Oil 20.5 lbs
311 Reamer for No. 311 Carriage 7 lbs
10883 418 Cutter for No. 311 Carriage 8.5 lbs
42365 341 Universal Q.O. Die Head Only, Right Hand Only 12.5 lbs
42370 360 Self Opening Die Head Only, Right Hand Only 13.5 lbs
97065 811A Nipple Chuck Complete, 1/2" - 2" 10.5 lbs
418 97075 815A Removable Tool Tray 6 lbs
LH/RH Reamer Cone 7 lbs
51005 819
22638 1452
46660 E-863

165

535 THREADING MACHINE & ACCESSORIES

Model 535 Threading Machine

SPECIFICATIONS 535
MIteomde#l # 96497
Description Hammer Chuck Machine Only (No Die Heads or Dies)
Pipe Capacity 1/8" – 2", 2-1/2" – 4", 4" – 6" with 141 and 161 geared threaders
Bolt Capacity 1/4" – 2"
RPM 36
Voltage 115 V
Frequency 50-60 Hz
Phase 1
Motor Type Universal
Amperage Draw 15A
Power 1/2 HP
Weight 111.1 lbs

ACCESSORIES
Item # Model # Die Head How Thread Oil Thru Dies Pipe Bolt Used Weight

Description Opened Direction Head Used Cap. Cap. On

Machine NPT Die Heads

97065 811A Universal Q.O RH Yes Univ. 1/8"-2" 1/4"-2" ****** 11111228333..55lblllbbbllsbbsssss
97075 815A Universal S.O RH Yes Univ. 1/8"-2" 1/4"-2"
84537 816 Universal S.A RH Yes Univ. 1/8"-3/4"
84532 817 Universal S.A RH Yes Univ. 1"-2"
23282 842 Universal Q.O LH Yes Univ. 1/8"-2"
10491 555 555 Q.O RH Yes Dual/Bolt 1/8"-3/4"

S.O - Self-Opening
Q.O - Quick-Opening
S.A - Semi-Automatic

Machine Bolt Die Heads

SPECIFICATIONS How Bolt Used Weight
Model # Die Head Opened Thread Oil Thru Dies Pipe Cap. On
Item # Description Direction Head Used Cap.

97045 531 Bolt Q.O RH/LH Yes 500B 1/4"-1" ** 79.5lblbss
97050 532 Bolt Q.O RH/LH Yes 500B 1-1/8"-2"

S.O - Self-Opening
Q.O - Quick-Opening
S.A - Semi-Automatic

Machine Mono Die Heads

SPECIFICATIONS Bolt Used Weight
Item # Model # Die Head How Thread Oil Thru Dies Pipe Cap. On

Description Opened Direction Head Used Cap.

42047 500A Mono Q.O RH Yes Mono 1/8" * 6-3/4 lbs
42052 500A Mono Q.O RH Yes Mono 1/4" * 7 lbs
42057 500A Mono Q.O RH Yes Mono 3/8" * 7 lbs
42062 500A Mono Q.O RH Yes Mono 1/2" * 7-1/4 lbs
42067 500A Mono Q.O RH Yes Mono 3/4" * 7-1/4 lbs
42072 500A Mono Q.O RH Yes Mono 1" * 8 lbs
42077 500A Mono Q.O RH Yes Mono 1-1/4" * 8 lbs
42082 500A Mono Q.O RH Yes Mono 1-1/2" * 8-1/2 lbs
42087 500A Mono Q.O RH Yes Mono 2" * 8-1/2 lbs

S.O - Self-Opening * 535-535A-1822 Machines and 300, 300 Compact and 300-A w/carriage.
Q.O - Quick-Opening
S.A - Semi-Automatic

166 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

535 THREADING MACHINE ACCESSORIES

Pipe Dies for Universal Die Heads

SPECIFICATIONS

Nominal Pipe Size (Threads Per Inch)
1/8"- 1/4"-3/8"- 1/2"-3/4"- 1"-2"- 1/8"- 1/4"-3/8" 1/2"-3/4" 1"-2"-
27 18 14 11-1/2 27 -18 -14 11-1/2
National Pipe Taper (NPT) National Pipe Straight Mechanical (NPSM)

HHHHAHH.l..i.iSlSgSgSo..hh..yFF--FFoRSSoroorpHpPrrSele aCPetesaVatddiiscCnLtRCl eRHIHorsHao s tn eS dtePeipleRRHH 4434777977753587 5575 4444 7777 778746810000 454474770707 077778641148552555 34447471777700787778752729540200000 47845 47850 47855 47860






Pipe Dies for 500A Mono Die Heads
SPECIFICATIONS
Nominal Pipe Size (Threads Per Inch)

1/8" - 27 1/4" - 18 3/8" - 18 1/2" - 14 3/4" - 14 1" - 11-12 1-1/4"- 1-1/2" - 2" -
N ational Pip e Taper (NP1T1)-1/2 11-1/2 11-1/2
HH.iSg.hF-oSrpSeteadinRleHss 50700 50705 50710 50715 50720 50725 50730 5500778305 505704708 5
Steel RH 50745 50750 50755 50760 50765 50770 50775

National Pipe Straight Mechanical (NPSM)
High-Speed RH 50895 50900 50905 50910 50915 50920

Conduit Dies for Universal Die Heads

SPECIFICATIONS
Nominal Conduit Size (ISO) (Pitch in mm)
A lloy RH Nominal Conduit Size (BEC) (Threads Per Inch)

16-32 mm - 1.5 40-63 mm - 1.5 1/2"-5/8" - 18 3/4"-1-1/4" - 16 1-1/2"-6627-11/02" - 14
50645 50650 66700 66705

Bolt Dies for Universal Die Heads

SPECIFICATIONS Unified National Fine (UNF)

Unified National Course (UNC)

High-Speed RH Rod Size TPI High-Speed RH Rod Size TPI
48215 48295 1/4" - 28
48220 1/4" - 20
48225 759111113315///7-----////111117313/82846668"/////""""28484""""-----"""""----81111-----1119 316075667482 44444444444448888888888888333333333333356371523142400500005550555
48230 3/8" - 24
48235 7/16" - 20
48240 1/2" - 20
48245 9/16" - 18
48250 5/8" - 18
48255 3/4" - 16
48260 7/8" - 14
48265 1" - 14NS *
48270
48275 1" - 12
48280 1-1/8" - 12
48285 1-1/4" - 12
48290 1-3/8" - 12
1-1/2" - 12
2" - 4-1/2

*NS = Non Standard
Bolt Dies for 500B, 532 & 542 Die Heads

SPECIFICATIONS

8 UN 12 UN

High-Speed RH Rod Size TPI High-Speed RH Rod Size TPI High-Speed RH Rod Size TPI
49215 1-1/8" - 8 49240 1-3/4" - 8 49345
1-1/4" - 8 49245 1-7/8" - 8 2" - 12
49220 1-3/8" - 8 49250
49225 1-1/2" - 8 2" - 8

49230

167

535 THREADING MACHINE ACCESSORIES

Bolt Dies for 500B, 531, 532, 541 & 542 Die Heads

SPECIFICATIONS

Unified National Corse (UNC) Unified National Fine (UNF)

High-Speed RH H igh-Speed LH Rod Size (TPI) High-Speed RH Rod Size (TPI)

44444444444444448888888888888888666666666666666606532644187735210500550550005505 4444444444444488888888888888999999999999995413726867245350550505550050 1/4" - 20 444888766909005 1/4" - 28
5/16" - 18 48705 5/16" - 24
3/8" - 16 48710 3/8" - 24
7/16" - 14 48715 7/16" - 20
1/2" - 13 48720 1/2" - 20
9/16" - 12 48725 9/16" - 18
5/8" - 11 48730 5/8" - 18
3/4" - 10 48735 3/4" - 16
49305 7/8" - 14
7/8" - 9 48740
1" - 8 48745 1" - 12
1-1/8" - 7 1" - 14NS
1-1/4" - 7 1-1/8" - 12
1-3/8" - 6 1-1/4" - 12
1-1/2" - 56 48755 1-3/8" - 12
1-3/4" - 1-1/2" - 12
2" - 4-1/2
2" - 4-1/2

For use with 531, 541 and For use with 532, 542 and
500B 1/4"-1" Die Heads 500B 1-1/8"-2" Die Heads

Rebar Dies for 500B, 531 & 532, & 542 Die Heads

SPECIFICATIONS Unified National Fine (UNF)
Unified National Corse (UNC)

High-Speed RH Rebar Size (TPI) High-Speed RH Rebar Size (TPI)
33334444000098872277 3/8" - 16 887955188255005 1" - 8
1/2" - 13
5/8" - 11 1-1/8" - 7
3/4" - 10 1-3/8" - 6


Beveling Dies

• For beveling pipe prior to welding
• A set of beveling dies consists of three guide segments and one cutting segment

SPECIFICATIONS

Item # Description Pipe Size Used in Die Head
52192 Universal
50960 37-1/2º Bevel Die Set 1/2" - 3/4" 12-20 mm Universal
52202 37-1/2º Bevel Die Set 1" - 2" 25-50 mm Universal
52965 12-20 mm Universal
45º Bevel Die Set 1/2" - 3/4" 25-50 mm
45º Bevel Die Set 1" - 2"

Cut Grooving Dies

• To cut groove pipe for mechanical type couplings

SPECIFICATIONS Description Pipe Size Used in Die Head
Item # Grooving Die Set 1/2" - 3/4" 12-20 mm Universal
52217 Grooving Die Set Universal
50985 1" - 2" 25-50 mm

168 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

1224 THREADING MACHINE & ACCESSORIES

Model 1224 Threading Machine

SPECIFICATIONS
ICteamtal#o g # 1224
Pipe Capacity 26092
Bolt Capacity 1/4" – 2" @ 36 rpm 2-1/2" - 4" @ 12 rpm 4" - 6" with 161 Geared Threader
Description 1/4" – 2"
Die Heads 1/2" - 4" NPT Hammer Chuck Machine
RPM 711 / 714
Voltage 36 / 12
Frequency 120 V
Phase 60 Hz
Motor Type 1
Amp Draw Induction
Motor Control 151
Power Reverse / off / forward, heavy-duty rotary type and integral foot switch
Chuck 1-1/2" hp
Rear Centering Hammer-type with replaceable rocker-action jaw inserts
Device
Cam action

Oiling Pump Self-priming, gerator-type, automatic-reversing, constant-flow
Oiling Method Thru die head
Weight 509 lbs

Accessories

SPECIFICATIONS
Item # Model # Description
1/4"-4" Wheel-Type Cutter
53223232634466164641071251121158011607627775727722 847484741416110949949A 1/4"-4" Blade-Type Reamer
1/4"-4" Blade-Type Reamer
Jaw Insert and Roll Set for PE-Coated Pipe
Nipple Chuck Complete, 1/2" - 2" NPT
Nipple Chuck 2-1/2" NPT
Nipple Chuck 3" NPT
Nipple Chuck 4" NPT
Universal Drive Shaft
Transmission Grease, 1 lbs

Die Heads for Model 1224
SPECIFICATIONS
Item # Model # Description Capacity Weight

252225255555776776665687441141115547406304565991222722772272 577757744612112361415 1121224UB4RT/--/-""-oeln44a1111ociGGd""/v///le8222eerr--Bd"oo"""rs12Tiioo-n---ta""y vvg2433lpiiNB"nn"--HeH11ggoPBCaa//ClTot22BDnnuul""d1ditti1tet2GG21tGDODe2S22rrrri4inoo2e4oe el4oostosyDD*,vv,v* Di iiiSeiSennnieeegggHHllfHfeDB-De-OaeOaiiiteeaddppdO,,SeHe,QnnQeneQlituiyaunn*ui* digcgc ic ,k, kk-R-R-OOHOHpp p eeenn niininnggg,,, RLR HHH/ /LLHH 2-12211131 ---/2111////4444"///842""""- """----3---2142-2441"""" """/2 " 11722932322....010.52.2222lllllllbbbbbbbllbbsssssssss

Note: Die Heads do not include dies. All Die Heads are through-head oiling.

Pipe Dies for Use in Universal Die Heads (Models 504A, 811A,
815A, 816, 817, 865, 911 & 913)
SPECIFICATIONS
Nominal Pipe Size (Threads Per Inch)

Size 1/487"7-552 7 1/4" 4-737/680" - 18 1/2" 4-737/645" - 14 1" - 24"77-7101-1/2
HH.iSgh. F-SopreSetdainRleHs s Steel RH 47775 47780 47785 47790

Pipe Dies for Model 1224 Threading Machine

SPECIFICATIONS Description
Item # Capacity
233443334633431425100092089920397579772722277
High-Speed NPT Dies 2-1/2"- 4
High-Speed NPT Dies for Plastic Pipe 2-1/2"- 4
High-Speed NPT Dies for PVC 2-1/2"- 4
High-Speed NPT Dies for Stainless Steel 2-1/2"- 4
1224 45º Beveling Dies 2-1/2"- 4
1224 37-1/2º Beveling Dies 2-1/2"- 4
1224 Bevel Guide Set 2-1/2"- 4
1224 37-1/2º Bevel Bit Only
1224 45º Bevel Bit Only

169

TAPPING TOOL Tapping Tool
ROLL GROOVERS
• Easy to use: At only 21", this lightweight and compact tool is great for tight quarters and
awkward locations.

• Heavy-duty design: Sturdy machined, corrosion-resistant materials for dependable lifelong
benefits.

• Built-in bleed valve allows for easy purge of chips.
• Independent cutter feed gives the operator total independent control of the cutter feed

rotation for optimal saw life.
• Taps a variety of materials including steel, cast iron, ductile iron and plastic pipe.
• Versatility: The RT3422 is capable of tapping mains of water up to 500 psig and steam, air

and natural gas up to 150 psig.
• Coupon retaining bits: Exclusive pilot bits give you the confidence that the coupon will not

be dropped in the pipe, preventing medium contamination or possible damage of down
stream equipment.

SPECIFICATIONS RT3422
Item #
Capacity
3/4" – 2"
Saddle
M ounting TWherleda-do--ole-tl®et
Welded Nipple
Cutter Travel 14"
Air ratchet
Activation Hand ratchet
Right angle drill
Cutter Feed Rotation of sleeve around an Acme threaded barrel
P ressure Steam, air and natural Gas: 150 psig @ 370°F
Water: 500 psig @ 100°F

RIDGID® 915 Manual Roll Groover

SPECIFICATIONS 915
Item #

1-1/2", 2-1/2" – 3" Sch. 80 PVC
1-1/4" – 12" Sch. 10 Steel and Stainless Steel Pipe
Capacity 1-1/4" – 6" Sch. 40 PVC
1-1/4" – 6" Sch. 40 Steel and Stainless Steel Pipe
2" – 8" K, L, M, DWV Cooper
1-1/4" – 1-1/2" Sch. 10 or 40 Steel or Stainless Steel
Optional 2" – 8" Cooper Tube Type K, L, M, and DWV
Groove Sets 4" – 6" Sch. 40 Steel or Stainless Steel
8" – 12" Sch. 10 Steel or Stainless Steel
Actuation Feed screw with 1/2" ratchet wrench (included)
Handle Cast-in carrying handle makes it easy to transport or lock up to prevent theft
Included 2" – 6" Sch. 10 (2" – 3-1/2" Sch. 40) Roll Set, Ratchet
Weight 23 lbs

RIDGID® 975 Combo Roll Groover

SPECIFICATIONS 975
Item #

1-1/2" – 4" Schedule 80 PVC Pipe
C apacity 1-1/4" – 2" Schedule 40 Stainless Steel Pipe
1-1/4" – 6" Schedule 10
1-1/4" – 6" Schedule 10 and Schedule 40 Steel, Aluminum, and PVC Pipe
D AcetputahtiAodnj ustment With Roll Change 2" – 8" Copper Tube (Type K, L, M, and DWV)
Adjusting screw and integral, index depth gauge
Feed screw with 1/2" ratchet wrench (included) or any 15/16" hex
Power Drive Mounting RIDGID 300 Compact with Adapter 67662
I Wnecilgudhte d R2R6aIDtlcbGhsIeDt 300 Power Drive 38/57 rpm

170 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

ROLL GROOVERS

918-I Roll Groover

SPECIFICATIONS
Item # 918-1
Catalog # 64977
DeVsoclrtaipgteio n R11o5ll Grooving Machine Complete
Weight 185 lbs

1"- 12" Sch 10 Steel
C apacity 1"- 8" Sch 40 Steel
2"- 6" Copper (types K, L, M & DWV)

1-1/2", 2-1/2" - 4" Sch 80 PVC
Motor Universal 1/2 HP
Motor Control On/Off Heavy-Duty w/ Foot Switch
Speed 45 rpm No Load

STANDARD EQUIPMENT
Item# Description
3486460425
49217 Footswitch, ASM.
51432 Roll Set for 8"-12" Sch 10 (8" Sch 40) with Carry Case
Groove Roll 2" - 6"
6594199922 Drive Roll 2" - 6"
49087 1" - 12" Stabilizer for Grooving Nipples
54317 Stand, ASM 918-I
67192 T-Handle Hex Key, 1/8"
5637198977 Box Wrench
Spanner Wrench
Hex Key 3/8"
Roll Storage Case

ACCESSORIES Weight
Item # Description 18 lbs
48405 10 lbs
Roll Set for 8"-12" Sch 10 (8" Sch 40) with Carry Case 20 lbs
4488441027 RRoollll Set for 1-1/4"-1-1/2" Sch10/40 with Carry Case 10 lbs
48417 Set for 1" Sch 10/40 and 1-1/4"-1-1/2" Sch 10/40 w/Carry Case 11 lbs
Roll Set for 2"-6" Copper 0.5 lbs
59992 Roll Set for 1"-12" Stabilizer for Grooving Nipples 0.5 lbs
76822 Inch Diameter Tape
76827 Metric Diameter Tape

920 Roll Groover
SPECIFICATIONS
Item # 920
Catalog #
Description 95782
Voltage 920 Roll Groover with 2" - 6" Sch. 40.8" - 12" Sch. 40 and 14" - 16" Std.
115
C apacity 2" Wall Steel, Stainless Steel, Aluminum
2"-8" Sch 40 PVC
2-1/2"-4 Sch 80 PVC
2"-8" Copper (K, L, & M)
3"-8" Copper (DWV)
Weight 199 lbs

STANDARD EQUIPMENT
Item # Description
49225075
10843 #32 Transporter (for Power Drives and Tristand Vises)
Training Video & User Manual
Set of Rolls 2-6" 920
10848 Set of Rolls 8-12" 920
10853 Set of Rolls 14-16" 920

ACCESSORIES Description Weight
Item # Model # 14.25 lbs
42575 32 0.5 lbs
76822 #32 Transporter (for Power Drives and Tristand Vises) 0.5 lbs
- Inch Diameter Tape 167 lbs
7966832727 RJ6- 24 Metric Diameter Tape
RJ624 Large Diameter Pipe Stand 20 lbs
96982 - Drive & Groove Roll Set for 2"-8" Copper Tube Type K,L,M, & DMV 21 lbs
96987 - Drive & Groove Roll Set for 18"-20" Sch. 10 Steel or Stainless Steel
96992 - Drive & Groove Roll Set for 22"-24" Sch. 10 Steel or Stainless Steel 22 lbs
96997 - Drive & Groove Roll Set for 4"-6" Sch. 40 Steel or Stainless Steel 20 lbs

171

PIPE BEVELER B-500 Pipe Beveler
PIPE CUTTERS
SPECIFICATIONS 49298
Item #
Capacity
4" Pipe and Larger, Flat Plate
Pipe Wall/Plate Thickness Min 0.188" Max 0.50"
Bevel Angles 37.5º (Standard - Included) 30º and 45º (with Optional Cutter Heads)
SWCiuezteitg ehrt Head R5125a..t58e"dlbLfsoxrTo1Mo1ol.5sW"teSWigtehxet1l &3.3S"taHinless Steel*
Land Width 0"- 3/16" in approximately 1/32" increments
Motor Type Universal Single Phase
Motor Rating 1.2 HP, 115V, 50/60Hz
Amps 13A (115V)
Operating Speed (No Load): 950 RPM (115V)
Body Steel Frame
Standard Equipment Beveller, Manual Crank Handle, 37-1/2º Cutter Head, 6 – 4 Edged Inserts,
Torque Driver, and Screws

* Beveller cutting head and inserts are optimized for standard A53 mild steel pipe. Reduced insert life can be expected on other materials.

258 & 258-XL Power Pipe Cutters
SPECIFICATIONS
Item # 258 258-XL
Catalog #
DCuesttcinrigptCioanp acity 2-1/2" 50767 50227
Pipe Cutter Pipe Cutter
258 258-XL Powered to 8" schedule 10*/40 steel pipe 8" to 12" schedule 10*/40 steel pipe
Model 700 Power Drive (not included) Model 700 Power Drive (not included)
Power Drive RPM 26-30 (no load) 26-30 (no load)
Weight 105 lbs (excludes Power Drive) 140 lbs (excludes No. 700 Power Drive)
STANDARD EQUIPMENT

Accessories for 258 and 258-XL

SPECIFICATIONS Description Weight
Item # Catalog #

- 66687 8-1/2" H-D Cutter Wheel Assembly 13 lbs
E-258 (includes HD Cutter Wheel, hub w/ pins, cover plate) 2 lbs
E258-T 50812 8-1/2" H-D Cutter Wheel only 2 lbs
- 58222 8-1/2" Thin Wall Cutter Wheel Only (PVC and Steel) 24 lbs
258PS 54397 Transport Cart 21 lbs
- 60002 Ball Transfer Pipe Support 2-1/2" to 12" 13 lbs
61757 Pipe Roller for Beveling (for Model 258 only)

*Use the thin wall cutter wheel for best results.
Note: Model 258 is not recommended to cut cast iron pipe.
For Optimum wheel life always properly support the work piece with ball transfer pipe supports.

PIPE SAW

RIDGID® Pipe Saw Kit w/ 2 Clamps, 1" – 12" Capacity

SPECIFICATIONS
Item # 66398
Nominal Cutting Capacity Large Clamp: 6" to 12" Small Clamp: 1" to 6"
MCPiuipnteiQmOuuuamtlsitiCydue(MtD-aOixaff.mOLeeftfnesgre tth) L01."a0r(5Pg0eip"eClSaamwpN: 6o.t5F"otor F1a2c.7in5g" Small Clamp: 1.26" to 6.625"
Pipe End)

Cast Iron: Diamond Abrasive and 1/2" Max Wall Thickness
P ipe Material & Blade Guide Plastic: Carbide Tipped Blade and 0.070" Max Wall Thickness
Steel, Stainless Steel and Most Metal: Cermet-Tipped Blade and
1/2" Max Wall Thickness
Saw Blade Type 8" Outside Diameter with 5/8" Round Arbor
Motor Current: 15 Amp Power: 1800 W Voltage: 110V – 120V AC
CNoonLtoroalds Speed 3900 RPM
On/Off (I/O) Switch
Includes Model PC-106 1" – 6" Pipe Saw Clamp
Model PC-612 6" – 12" Pipe Saw Clamp
Model PCS-500 Pipe Saw
Accessories Saw Blade for SIrotenePl aipned(S69ta9i8n8le)s, sSaSwteeBlla(6d6e4f1o3r)Plastic Pipe (69053),
Saw Blade for

172 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

PROPRESS® TOOLS

RIDGID® RP 340 Battery Press Tool Kit with ProPress® JAWS,
1/2" – 2" Capacity

• More than 400 presses per charge using Advanced Lithium 4 Battery
• Ability to switch between battery and AC power on the same tool
• LED-light for continued operations in no or low-light environments
• The only standard sized tool that offers a full line of jaws and rings compatible with:

• 1/2" - 4" ProPress for cu & ss • 1/2" – 2" PureFlow for PEX • 1/2" – 2" MegaPress for steel

SPECIFICATIONS RP 340
Item #
Capacity
1/2" – 4" copper, steel and stainless steel 1/2" – 2" PEX
Connection Flameless system connects pipe by press in less than
SHH CeeyyrdcavlrdeiacRuTeloiimIctnateRte iarovmna lO utput 5 seconds. Works wet or dry.
7,200 lbs
~4 seconds
270° Barrel/Jaw Swivel
42,000 cycles
Power 18V Advanced Lithium Ion Battery
Operating (400+ crimps per charge using)
Lighting Temp 15° F to 122° F
Built-in LED light
1" Jaw for ProPress (76662)
I ncludes 1/2" Jaw for ProPress (76652)
18V Advanced Lithium Ion Battery and Charger
3To/4o"l JwOwaniiwttlhhyf:oBB7raa.P3ttttreelobrrPsyyr:ea8sn.s3d(l71b6/s26"57J)aws:
Weight Tool
Tool 12.3 lbs

PROPRESS® TOOL ACCESSORIES

RIDGID® Standard Series Jaws for ProPress System,
1/2" – 2" Capacity

• Compatible only with RIDGID® Standard Series pressing tools, including the
RP 340 Press Tool and ProPress System fittings.

SPECIFICATIONS

Item # 76652 76657 76662 76667 76672 76677
Size
for PorPress® 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"

Weight 4 lbs 4.25 lbs 4.5 lbs 4.75 lbs 6.5 lbs 10 lbs

RIDGID® MegaPress® Standard Jaw and Ring
Kit for Black Iron Pipe, 1/2" – 2" Capacity

SPECIFICATIONS 48553
Item #
Capacity
1/2" to 2" black iron pipe
For Use With RIDGID® Standard Press Tools (including our RP 340 Rental)
Fitting Compatibility Viega MegaPress and MegaPress fittings
Connection Pressed (can be made on a wet system)
1" MegaPress Jaw (37968)
1/2" MegaPress Jaw (37958)
Includes 1-1/2" MegaPress Ring (37978)
1-1/4" MegaPress Ring (37973)
2" MegaPress Ring (37983)
3/4" MegaPress Jaw (37963)
Weight 48.5 lbs

173

PROPRESS® TOOL ACCESSORIES
RIDGID® Standard Series ProPress® XL-C™ Ring and Actuator
Kit for Copper and Stainless Steel, 2-1/2" – 4" Capacity

SPECIFICATIONS

Item # 20483
Capacity
2-1/2" to 4" copper or stainless steel tube
For Use With RIDGID® Standard Press Tools (including our RP 340 Rental)
Fitting Compatibility ProPress XL-C Fittings
Connection Pressed
2-1/2" XL-C Press Ring (20543)
Includes 3" XL-C Press Ring (20548)
Weight 4" XL-C Press Ring (20553)
V2 Press Ring Actuator (21878)
40.5 lbs

RIDGID® Press Booster Kit for Use with Viega Megapress®
XL Fittings, 2-1/2" – 4" Capacity

SPECIFICATIONS

Item # 60638
For Use With RIDGID® Standard Press Tools with Press Booster (RP 340, RP 330)
Fitting Compatibility For use with MegaPress® XL and MegaPress® XL Stainless Fittings
Capacity 2-1/2" to 4" Steel
Connection Flameless system connects pipe in less than 25 seconds
2-1/2" Ring for MegaPress XL (60643)
Includes 3" Ring for MegaPress XL (60648)
4" Ring for MegaPress XL (60653)
Weight 52.5 lbs

RIDGID® Press Snap™ Soil Pipe Cutter Kit

SPECIFICATIONS

Item # 34403

CC oapmapcaittya bility Works with all RIDGID standard press tools
(CT-400,320-E, RP 330-B and RP 330-C)
1-1/2" to 4" No Hub & Service Weight Soil Pipe
I ncludes OCapseerator's Manual
Press Snap Cutter

RIDGID® STRUTSLAYR® Strut Shear Head

SPECIFICATIONS

Item # 64058
For Use With
RIDGID 32kN press tools, including the RP 340
Material Compatability Strut Channel (Not for use with stainless steel strut)
Cutting Capability Up to 12 ga 1-5/8" x 1-5/8" strut channel to the MFMA-4 Standard
Cut Squareness Up to 12 ga 1-5/8" x 13/16" strut channel to the MFMA-4 Standard
+/- 2° (strut must extend past strut support)
1-5/8" Die Shear
Includes C13a/s1e6" Die Shear
Strutslayr Head

174 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

BEVELING BAND Manual Beveling Crawler and 6" - 60" Beveling Bands

#206A The SMC Crawlers and Bands from Sawyer set the industry standard for large diameter
pipe cutting and beveling. Ideal for cutting in tight spaces, the unique right angle drive
attachment for this pipe beveling machine allows you to cut with only 6 inches of clearance
in the bell hole, and the flexible stainless steel beveling bands on this pipe cutter adapt to
any situation and permit the crawler to smoothly and consistently cut and bevel pipe.

• Available for pipe sizes 6" and larger
• Allow single-operator setup on pipes as large as 48 inches in diameter
• Smooth, accurate cuts and bevels
• Lightweight and adaptable to any beveling requirement

SPECIFICATIONS Description Dimensions Weight
Item #

206A-9 Beveling Crawler 23" x 23" x 12" 30 lbs
220066CC--68 with 9 ft Shaft 12" x 9" x 6" 6 lbs
206C-10 8 lbs
206D-12 6" Beveling Band 14" x 10" x 10" 10 lbs
206D-14 8" Beveling Band 14" x 10" x 10" 12 lbs
220066DD--1186 10" Beveling Band 18" x 18" x 10" 14 lbs
206D-20 12" Beveling Band 18" x 18" x 10" 16 lbs
206D-22 14" Beveling Band 18" x 18" x 10" 18 lbs
220066DD--2246 16" Beveling Band 18" x 18" x 10" 20 lbs
206D-28 18" Beveling Band 23" x 23" x 10" 22 lbs
206D-30 20" Beveling Band 23" x 23" x 10" 24 lbs
206D-32 22" Beveling Band 23" x 23" x 10" 26 lbs
220066DD--3364 24" Beveling Band 25" x 25" x 10" 28 lbs
206D-38 26" Beveling Band 31" x 31"x 10" 30 lbs
206D-40 28" Beveling Band 31" x 31"x 10" 32 lbs
220066DD--4442 30" Beveling Band 31" x 31"x 10" 34 lbs
206D-46 32" Beveling Band 31" x 31"x 10" 36 lbs
206D-48 34" Beveling Band 37" x 37" x 10" 38 lbs
206D-50 36" Beveling Band 37" x 37" x 10" 40 lbs
220066DD--5524 38" Beveling Band 37" x 37" x 10" 42 lbs
206D-56 40" Beveling Band 43" x 43" x 10" 44 lbs
206D-58 42" Beveling Band 43" x 43" x 10" 46 lbs
206D-60 44" Beveling Band 43" x 43" x 10" 48 lbs
46" Beveling Band 49" x 49" x 10" 50 lbs
48" Beveling Band 49" x 49" x 10" 52 lbs
50" Beveling Band 49" x 49" x 10" 54 lbs
52" Beveling Band 52" x 54" x 10" 56 lbs
54" Beveling Band 54" x 56" x 10" 58 lbs
56" Beveling Band 58" x 60" x 10" 60 lbs
58" Beveling Band 62" x 64" x 10"
60" Beveling Band

A Whip
B Crank Handle
C Latch Handle
D Set Screw Assembly
E Torch Holder
F Drive Wheels
G 7/16" Cap Screws
H Legs

175

BEVELING BAND

Standard Torch Beveling Machine

Each H & M machine is constructed of durable, lightweight, hard-anodized aluminum for easy transportation
to any job-site. It is used for cutting and beveling 2" to 36" pipe precisely, quickly and economically, even
under the toughest conditions.
• Ring gear and saddle are precisely machined and calibrated to ± .025 in concentricity and ± .015 in

squareness.
• H & M’s unique “split horseshoe” design permits easy placement over pipe sections.
• A quick-operating boomer assembly securely locks the machine to the pipe for an entire 360-degree
rotation. No re-positioning is ever needed! H & M’s Cuboid Spacer System keeps the spacers on the
machine to minimize downtime.

• H & M Pipe Beveling Machines save weld prep time and money compared to hand cutting.
• With easy-to-follow manuals and a few minutes of instruction, any operator can easily make accurate
cuts and bevels.
• HOW FAST? For example, when using the No. 3 Standard Beveling Machine, a 20" pipe can be cut

and beveled in about four minutes!

SPECIFICATIONS
Item # Standard Pipe Sizes Weight
No. 2450331 0
Includes Torch No. 2", 2.5", 3" and 4" 9.5 lbs
No. 3", 4", 6" and 8" 18 lbs
No. 27 lbs
No. 6", 7", 8", 10" and 12" 55 lbs
No. 12", 14", 16", 18" and 20" 81 lbs
No. 92 lbs
20", 22", 24" and 26" 145 lbs
24", 26", 28" and 30"
30", 32", 34" and 36"

DOUBLE CHAIN CLAMP

D251 Double Chain Clamp

The Mathey Dearman Double Chain Clamp is a heavy-duty vessel clamp designed for aligning
and reforming pipes and vessels up to 20' (6 m) in diameter with Schedule 80 wall thickness.
• Numerous jackbars provide clamping pressure exactly where needed for perfect alignment
• Reforms and aligns pipe with Schedule 80 wall thickness
• Fits extremely large range of pipe diameters
• Jackbar pads pivot independently to handle uneven pipe and fitting surfaces
• Joints on large pipe or tube shells up to 20' (6096 mm) in diameter can be aligned, reformed

and welded without removing the clamp, saving time and improving weld quality.

SPECIFICATIONS

INPNteiuupmmme bbR#ee arrnoogffeMJ aaciknbBalrosc ks D19102"5–1-4180"48 are based on pipe with a tensile strength of
MP iapteeTrieanl sTiylepeS trength 11425(C,0a0l0culblastipoenrs square inch)

• (2) Nickel plated or stainless steel high-strength leaf chains
• Extra heavy-duty stainless steel Jackbars
(quantity as listed inspecifications)
Includes • Double chain Main block with (2) Fine Adjustments
• Level and Support Device (D251-1060 model and larger
supplied with cable hoist)
• Jackscrew Wrench
W eight • Parts and Operating Manual
278 lbs

176 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

ELECTRICIAN'S TOOLS

CABLE PULLERS

G3 Tugger® Cable Puller, 2,000 LB Capacity

SPECIFICATIONS
Item # G3
Applications Pulling 4/0 to 1,000 KCMIL cable
Cable Type ECloencttriincuaol CusabRleating: 1,200 lbs Intermittent: 2,000 lbs
Load High Speed: No Load @ 97 ft/min, 500 lb @ 59 ft/min, 1000 lb @ 36 ft/min
Low Speed: No Load @ 41 ft/min, 1,000 lb @ 21 ft/min, 2,000 lb
Capacity 5 minutes on, off) @ 13 ft/min
S Vopletaegde Rating P1(I2un0ltleiVnrmg iRtteonpte–: 1/2" Polyester 20 minutes Minimum Breaking
Mounting Boom (10,000 LB Strength)

Prime Mover Specification 1/2" double-braided composite rope (10,000 LB Average Breaking Strength)

G6 Turbo™ Cable Puller 6,000 LB Capacity

SPECIFICATIONS G6
Item # Continuous: 4,000 lbs (17.800 KN)
Intermittent: 5,000 lbs (22.200 KN)
Pulling Force
Momentary: 6,000 lbs (26.700 KN)
NRMoooptLoeorSa dizeM ain H31/2i4g0"hVDSAopCueb, el5ed0-:B/62r0a8idHftez/dm, 1Cin2omampopssite, Rated at 26,000 lbs (115.600 kN)
Capstan Speed Low Speed: 11 ft/min
No Load 2nd High Speed: 90 ft/min
ICnacplusdtaens Speed Low Speed: 35 ft/min
Foot Switch, Force Indicator
Standard Boom Extension 7.5 ft
Weight 252 lbs

UT8 Ultra Tugger® Puller w/ Mobile Versa Boom, 8,000 LB Capacity

SPECIFICATIONS 6806
Item #
Cable Type Electrical Cable
Load 8,000 (35.8 kN) lbs pulling force
Capacity 2,000 lbs @ 9 ft/min 8,000 lbs @ 6 ft/min
PSpriemceifiMcaotvioenr ARveeqruaigreedBRreoapkei:n7g/8S"trdeianmgteht:e1r,4d3okuNble(3-2b,r0a0id0eldb,) minimum
Voltage Rating 115 V polyester composite
Amperage Rating
Mounting 20 Amp
Mobile Versi Boom

UT10 Ultra Tugger® Cable Puller, 10,000 LB Capacity

SPECIFICATIONS 6906
AItepmpli#c ations C15abMleinPuutlelisngOann/1d5LMowinLuoteasd OPuffl:li6n,g500-8,000 lbs (28.9-35.6 kN)
Continuous Operation: 0-6,500 lbs (0-28.9 kN)
Capacity Momentary: 8,000-10,000 lbs (35.6-44.5 kN)

Cable Puller, 25,000 LB Capacity

SPECIFICATIONS 6810
Item # 8 x 250 MCM, 6 x 500 MCM, 5 x 750 MCM
Cable Sizes ASilnl CglaebCleasb:l8e0: 020lb0slbs
M aximum Traction Force 4 ft/min to 36 ft/min
Speed 115V
Voltage Rating L 41" H 27.5" W 37.5" / 285 lbs
Dimensions / Weight

178 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

CABLE PULLING ACCESSORIES

G-Series Smart Pull Force Gauge

• The Greenlee FG01 G-Series Smart Pull is a cable puller accessory intended to monitor the
force developed when cable is pulled into conduit.

• Includes provisions for mounting of the Ultra Tugger® Cable Puller and the Ultra Tugger®
boom and G6 Turbo® Puller.

SPECIFICATIONS Smart Pull FG01
Item # Up to 5aH Makita Battery
Power Supply Up to 10,000 lbs
Pulling Force Up to 7/8" Diameter Double Braided
Pulling Rope 18 V
Voltage Rating 128 MB
Onboard Memory +/- 2%
Accuracy L 25.5" x H 9.5" x W 8"
Dimensions 34.2 lbs without case, 52.2 lbs with case
Weight

Pulling Rope Available When Requested

SPECIFICATIONS
Item # 916600PR 9161200PR 34600PR 341200PR 78600PR 781200PR
Size 9/16" 9/16" 3/4" 3/4" 7/8" 7/8"
Length 600 ft 1200 ft 600 ft 1200 ft 600 ft 1200 ft

CONDUIT BENDERS

Single Shoe Electric Conduit Bender, Includes 1/2" to 2" Rigid,
EMT & IMC Shoes

• Simple switching between vertical and horizontal bending configurations
• Digital pendant sets angle and monitors process
• Solid state system eliminates arcing and prevents damage from temporary power
• Absolute encoder stops bending at precise angles
SPECIFICATIONS
Item # 854DX
CWBBVCASInotmeeooecalnnnntilnpguadddddedhgeuuRrateeriiarttasTdgR TSdy eyaiipuzptReeisena gti ng
Electric Conduit Bender
120 VAC
EMT, IMC, PVC Coated Rigid w/ Optional Accessory, Rigid
1/2" to 2" Rigid, EMT and IMC
4.25" – 9" EMT, IMC Rigid for 1/2" – 2" Shoe Size
1/2" – 2" Rigid, EMT and IMC Shoes, Digital Pendant, Roller Support
20 AMP GFCI Protected Receptacle
C/US UL Listed
550 lbs

Mobile Bending Table

• Locking swivel wheels for maneuverability
• Fork pockets to conveniently move the unit with a fork truck
• Ram positioner to ease the setup of the ram to accommodate different size shoes
• Steel pegs with hitch pins for storage of shoes and saddles
• Carriage assembly to mount the 881 Bender unit directly to the MBT
• Vice-chain to hold conduit securely for accurate bends, prevents conduit from twisting or

turning during bend
• Pump basket holds the hydraulic pump for the 881 bender unit

SPECIFICATIONS 881-MBT
Item # 4 Shoe Groups
Includes 2-1/2" One Shot 90° EMT, IMC, Rigid Shoe Group (27554)
3-1/2" One Shot 90° EMT, IMC, Rigid Shoe Group (31281)
Shoe Groups 3" One Shot 90° EMT, IMC, Rigid Shoe Group (27555)
L4"6O7"nex SWho3t19.50"°xEHMT4,1I"MC, HReigiigdhSt hWoiethGoruotuPpu(3m1p2:7345) "
WD iemigehnts ions 1,326 lbs

179

CONDUIT BENDERS

Classic Bender Power Unit, 1/2" to 2" Conduit & Pipe

• Simple relay controls for easy field repairs, and compact handle design to prevent interference
with conduit when bending.

• Lightweight, compact design for easy job-site mobility.
• Bending shoe groups are available to accommodate the following types:

• Electrical Metallic Tubing
• Intermediate Metallic Conduit
• Rigid Conduit
• PVC-Coated Rigid Conduit
• Schedule 40 Pipe

SPECIFICATIONS
Item # 555C
BROCVCoeeooplnlnnetaadddrtagieuuvteriieittnTRSTHgyyaipuzTptemeieen m gid piteyr ature -011EE5-2/lMe2°90c"T8tto,V%troIAiMc1C22CC"0o,°RnPFidgVuiCdit,CBEoMeanTtde, edIMrRCig, iPdV, RCigCidoated Rigid
S hoe Groups 1/2" – 1-1/4" Rigid PVC Bending Shoe (00573)
WS teaingdhat rd 1/2" – 2" EMT Single Shoe (23803)
1/2" – 2" Rigid Single Shoe (28008)
C/US UL Listed
260 lbs

1/2" to 2" EMT Shoe Group

SPECIFICATIONS 23803
Item #
Application
Conduit Bending
For Use With Greenlee® 555C Electric Conduit Bender
Conduit Capacity 1/2" – 2" EMT
1/2": 4-1/4"
3/4": 5-7/16"
Centerline Bend 1": 6-15/16"
Radius 1-1/4": 8-3/4"
1-1/2": 8-1/4"
2": 9"

1/2" to 2" Rigid/IMC Shoe Group

SPECIFICATIONS
Item # 28008
Application
Conduit Bending
For Use With Greenlee® 555CX, 555DX and 555C Electric Conduit Benders
Conduit Capacity 1/2" – 2" Rigid
1/2": 4-1/4"
3/4": 5-7/16"
Centerline Bend 1": 6-15/16"
Radius 1-1/4": 8-3/4"
1-1/2": 8-1/4"
2": 9"

1/2" to 1-1/4" PVC-Coated Rigid Shoe Unit

SPECIFICATIONS 00573
Item # Greenlee® 555CX, 555DX and 555C Electric Conduit Benders
For Use With 1/2" – 1-1/4" Rigid PVC Conduit
Conduit Type

180 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

BENDING AND THREADING STATION
Workhorse™ All-In-One Bending and Threading Workstation

OVERALL WORKHORSE™ SPECIFICATIONS
Item # WK100
SCtaosrtaegrse
(2) 8" locking casters, (2) 8" swivel casters
F eatures Lockable, Open
Bend check to measure conduit and verify 90-degree bends, cord wrap,
document holder, fork pockets on 3 sides, pass-through holes for electrical
H andle cords, and stow-able pipe supports for use with bend check tray.
Ergonomic handle height reduces lower back strain
(1) Mounted 467 Chain Vise
I ncludes (1) Mounted Greenlee® 555CX Electric Bender
(1) Mounted RIGID #300 Compact Threading Machine
W Diemigehnts ions L(3)7S4"hoxeHg6ro9u"pxsDfo3r 2u"se with 555CX Electric Bender
1,120 lbs

555X® ELECTRIC BENDER SPECIFICATIONS
Conduit Size & Type
Voltage Rating 1/2" to 2" Rigid, EMT, IMC, PVC Coated
120 VAC
Amperage Rating 20 AMP GFCI-protected receptable
OInpcelurdaetisn g Temp Standard pendant
-5° to 120° F
Relative Humidity 0-98%

1/2" to 2" EMT SHOE GROUP SPECIFICATIONS
Item # 23803
CCeonntdeuriltinCea pacity 11//22"":–42-1"/E4M" T 3/4": 5-7/16" 1": 6-15/16"
Bend Radius 1-1/4": 8-3/4" 1-1/2": 8-1/4" 2": 9"

1/2" to 2" RIGID SHOE GROUP SPECIFICATIONS
Item # 28008
Mounted Chain Vise Conduit Capacity
CBeenndteRrliandei us 111/-/221""/4:–":24"-18R/-i43g"/i4d"
13-/14/"2:":5-87-/11/64"" 21"":: 6-15/16"
9"

1/2" to 1-1/4" PVC-COATED RIGID SHOE UNIT SPECIFICATIONS
Item # 00573
Conduit Type
1/2" – 1-1/4" Rigid PVC Conduit

#300 COMPACT THREADING MACHINE SPECIFICATIONS
Pipe Capacity
Bolt Capacity 1/8" – 2"
Motor Control 1/4" – 2"
Chuck Heavy-duty rotary forward/off/reverse and integral foot switch
Oiling System Hammer-type with replaceable, rocker-action jaw inserts
Though-the-head with integral oil reservoir and self-priming, constant-flow,
gerotor pump

#300 COMPACT NPT DIE HEADS
Item # Catalog # Description How Opened Thread Direction Oil Thru Head Dies Used Pipe Capacity Weight
42047 Mono Q.O. RH Yes Mono 1/8" 6.75 lbs
42052 Mono Q.O. RH Yes Mono 1/6" 7 lbs
42057 Mono Q.O. RH Yes Mono 3/8" 7 lbs
5 00A 42062 Mono Q.O. RH Yes Mono 1/2" 7.25 lbs
42067 Mono Q.O. RH Yes Mono 3/4" 7.25 lbs
42072 Mono Q.O. RH Yes Mono 1" 8 lbs
42077 Mono Q.O. RH Yes Mono 1-1/4" 8 lbs
42082 Mono Q.O. RH Yes Mono 1-1/2" 8.5 lbs
42087 Mono Q.O. RH Yes Mono 2" 8.5 lbs

#300 COMPACT DIE HEADS
Item # Catalog # Description Weight
888885851111113311557126AAAA 13 lbs
84537 1/8" - 3/4" Semi-Automatic Die Head 7.5 lbs
97045 1/4" -1" Bolt Die Head Quick-Open R.H./L.H. 9 lbs
97050 1-1/8" -2" Bolt Die Head Quick-Open R.H./L.H. 13 lbs
97065 NPT Die Head Quick-Open R.H. 13 lbs
97075 815A 1/8" - 2" NPT Die Head, Self-Opening, R.H. 13 lbs
84532 1/2" - 2" Semi-Automatic Die Head 12.5 lbs
97070 815A 1/8" - 2” NPT Die Head, Self-Opening, R.H. 13 lbs
97080 815A 1/8" - 2" BSPT Self-Opening Die Head

#300 COMPACT ACCESSORIES
Item # Catalog # Description Weight
10.5 lbs
819 51005 Nipple Chuck Complete, 1/2" - 2" NPT 30 lbs
10.5 lbs
- 67662 Adapter Bracket for 300 Compact
819
68160 Nipple Chuck, 1/2" - 2" BSPT

181

CRIMPERS

Gator® 6 Ton Battery Powered Quad Point Crimper

SPECIFICATIONS
CIterimmp#e r EK6FTLX11
Type Dieless
Applications 6 Ton Crimping
Crimping Capacity 750 Kcmil (MCM) Cu & AI
WCriirme pSiinzge Force 6 AWG – 750 Kcmil Cu & AI
Handle 12,400 lbs (55 kN)
Pistol Style
Battery 18V 4.0Ah Li-ion
SLRetoantnagdttihaorn/d W eight Crimping Head Rotates 350°
C/US UL Listed
14.875" / 11 lbs

Gator® 12 Ton Battery Powered Indent Crimper

SPECIFICATIONS EK12IDLX11
Item #
Crimper Type Dieless
Applications 12 Ton Crimping
Crimping Capacity 1000 Kcmil (MCM) Cu & Al
Crimping Force 24,000 lbs (106kN)
Handle Pistol Style
Battery 18V 4.0Ah Li-ion
Rotation Crimping Head Rotates 350°
Standard C/US UL Listed
Dim./Weight 16-1/2" L x 14-1/2" H / 15 lbs

CABLE CUTTER

Gator® Battery Powered 50mm Cable Cutter

SPECIFICATIONS
Item # ESG50LX11
Cutter Type Guillotine
Applications Aluminum, Copper
Cutting Edge Hard Metal, Aluminum
Cutting Range 2" (50mm) Diameter Aluminum or Copper Cable
Jaw Size 1.97"
Handle Pistol Style
Battery 18 V lithium ion (Li-ion)
Rotation Cutting Head Rotates 350°
Length 15.75"

KNOCKOUT TOOL

Gator® Inteli-PUNCH™ Battery Powered Hydraulic Knockout
Driver and Case, 11 Ton Capacity

SPECIFICATIONS LS100XB
Item #

Applications For punching holes in mild steel, stainless steel, aluminum,
Capacity brass, copper, fiberglass and plastics
4" conduit up to 10 ga mild steel
Max Cycle Time 4" conduit up to 10 ga stainless steel
8 seconds
Rotation 360° rotating head to easily punch at any angle
Battery Makita® 18V Li-Ion (30 minute charge time)
Includes Driver and case

182 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

MATERIAL HANDLING

SKIP PANS, BRICK HANDLING BIN & MATERIAL BASKET
Skip Pans

A Skip pans are designed as specialized material baskets with solid steel sides and a slope at on
end. Skip pans are most commonly used for holding construction materials.
B Four top lift points and forklift pockets allow for ease of movement.
• Two dump lugs opposite the sloped side
C • Stainless Steel data plate with individual serial numbers with RFID tracking
D • Meets or exceeds ASME B30.20 “Below-the-Hook Lifting Devices”
• Design & Fabricated to ASME BTH-1 design standard
• Proof Tested to 125%

SPECIFICATIONS
Item # SP-7939 SP-7250
CWD iaempigeahnctsit iyons CDBA 180284600'''" l bs 6,000 lbs 2012148000''"'lbs

Brick Handling Bin

C • Designed to transport pallets of bricks safely to a work location via overhead crane with 4
B point lifting lugs

SPECIFICATIONS BSC
Item #
Capacity
Inside Bin 4,409 lbs
Outside Bin
A Dimensions AB 5500"" 555-21"/2 "
C 54" 62"
Weight 331 lbs

B Material Basket

C • Expanded metal sides
• Stainless steel data plate with individual serial numbers with RFID tracking
• Meets or exceeds ASME B30.20 “Below-the-Hook Lifting Devices”
A • Painted yellow with durable enamel paint

• Design and fabricated to ASME BTH-1 design standard
• Proof tested to 125%

SPECIFICATIONS

Item # MB-3579
Capacity
6,000 lbs
D im ensions BA 144''
C 2'
Weight
1,972 lbs

184 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

LIGHT DUTY MACHINERY ROLLERS

Light Duty Series Machinery Rollers, 3 – 8 Tons

• Riggers Kits and Sets Capacities: 3 and 8 Tons

SPECIFICATIONS
Kit Set Kit / Set Roller SKtitee/ lSCeat sInecKluitdBesox(AKllBK-iDts1:In1c6l"udxe12S.t3e7e5l"Cxas4e.4s4) " Weight
Capacity Capacity
Item # Item #

K RS-3-4S - 3 tons 0.75 tons (4) 0.75-SP Rollers, (2) 3-KH Handles 55 lbs

- RS-3-45 3 tons 0.75 tons (4) 0.75-SP Rollers, (2) 3-KH Handles 52 lbs

K RS-3-2S/2R - 3 tons 0.75 tons (2) 0.75-SP Rollers, (2) 0.75-RP Rollers, (2) 3-KH Handles 55 lbs

K RS-3-4S RS-3-2S/2R 3 tons 0.75 tons (2) 0.75-SP Rollers, (2) 0.75-RP Rollers, (2) 3-KH Handles 52 lbs

K RS-8-4S - 8 tons 2 tons (4) 2-SP Rollers, (2) 8-KH Handles 85 lbs

- RS-8-4S 8 tons 2 tons (4) 2-SP Rollers, (2) 8-KH Handles 76 lbs

K RS-8-2S/2R - 8 tons 2 tons (2) 2-SP Rollers, (2) 2-RP Rollers, (2) 8-KH Handles 85 lbs

- RS-8-2S/2R 8 tons 2 tons (2) 2-SP Rollers, (2) 2-RP Rollers, (2) 8-KH Handles 76 lbs

HEAVY DUTY MACHINERY ROLLERS

Heavy Duty Machinery Rollers, 15 – 200 Tons

• Deluxe Kit Capacities: 15-60 Tons

• Complete Set Capacities: 15-200 Tons

SPECIFICATIONS Kit/Set Roller KStite/eSleCt aInsceluKditesBo(AxllKKDi-tsD2In:c2l7u.d7e5"Sxte1e4l.C75a"sexs9) .63" Wgt
Kit Set Capacity Capacity (lbs)
Item # Item #
203
K RS-15-SLP - 15 tons 3.75 tons (4) 3.75-SLP Rollers, (2) KDH48F Handles

- RS-15-SLP 15 tons 3.75 tons (4) 3.75-SLP Rollers, (2) H36F 36" Handles 156

K RS-15-SLD - 15 tons 3.75 tons (4) 3.75-SLD Rollers, (4) P-1 Preload Pads, (2) KDH48F Handles 203

- RS-15-SLD 15 tons 3.75 tons 4) 3.75-SLD Rollers, (4) P-1 Preload Pads, (2) H36F 36" Handles 156

K RS-30-SLP - 30 tons 7.5 tons (4) 7.5-SLP Rollers, (2) KDH48F Handles 215

- RS-30-SLP 30 tons 7.5 tons (4) 7.5-SLP Rollers, (2) H48F 48" Handles 172

K RS-30-SLD - 30 tons 7.5 tons (4) 7.5-SLD Rollers, (4) P-1 Preload Pads, (2) KDH48F Handles 215

- RS-30-SLD 30 tons 7.5 tons (4) 7.5-SLD Rollers, (4) P-1 Preload Pads, (2) H48F 48" Handles 172

K RS-40-SLP - 40 tons 10 tons (4) 10-SLP Rollers, (2) KDH48F Kit Size Handles 219

- RS-40-SLP 40 tons 10 tons (4) 10-SLP Rollers, (2) H48F 48" Handles 176

K RS-40-SLD - 40 tons 10 tons (4) 10-SLD Rollers, (4) P-1 Preload Pads, (2) KDH48F Handles 219

- RS-40-SLD 40 tons 10 tons (4) 10-SLD Rollers, (4) P-1 Preload Pads, (2) H48F 48" Handles 176

K RS-60-SLP - 60 tons 15 tons (4) 15-SLP Rollers, (2) KDH48F Kit Size Handles 255

- RS-60-SLP 60 tons 15 tons (4) 15-SLP Rollers, (2) H48F 48" Handles 212

K RS-60-SLD - 60 tons 15 tons (4) 15-SLD Rollers, (4) P-1 Preload Pads, (2) KDH48F Handles 259

- RS-60-SLD 60 tons 15 tons (4) 15-SLD Rollers, (4) P-1 Preload Pads, (2) H48F 48" Handles 216

K RS-60-SLP RS-120-SLP 120 tons 30 tons (4) 30-SLP Rollers, (2) H60F 60" Handles 542

- RS-120-SLD 120 tons 30 tons (4) 30-SLD Rollers, (2) P-2 Preload Pads, (2) H60F 60" Handles 540

K RS-60-SLD RS-200-SLP 200 tons 50 tons (4) 50-SLP Rollers, (2) H60F 60" Handles 834

- RS-200-SLD 200 tons 50 tons (4) 50-SLD Rollers, (4) P-2 Preload Pads, (2) H60F 60" Handles 848

185

HEAVY DUTY MACHINERY ROLLERS

Heavy Duty Series Machinery Rollers, 0.75 – 50 Tons

SPECIFICATIONS

Item # Capacity Top Height Width Length Weight Contact
Style Rolls

SLP 31315 .770005.5----5SSSS--SSLLLLLLPPPPPP 3.75 tons* 5" 5-3/4" 10-1/2" 34 lbs 5
SLD 7.5 tons* Swivel 5-1/4" 5-3/4" 10-1/2" 38 lbs 4
SLS 10 tons* Locking  5-1/4" 5-3/4" 10-1/2" 38 lbs 4
15 tons Padded 5-1/8" 6-3/8" 12-3/4" 49 lbs 5
30 tons* 122 lbs 5
50 tons* 8" 8" 15" 193 lbs 7
8-15/16" 8" 21"

3.75-SLD 371.531.7050055tttttotooooonnnnnnssssss** * DLSioSaGwwcm triekitivodheinenlgld  4-3/4" 5-3/4" 10-1/2" 34 lbs 5
11375 .05005-----SSSSSLLLLLDDDDD 5" 5-3/4" 10-1/2" 37 lbs 4
5" 5-3/4" 10-1/2" 37 lbs 4
6-3/8" 12-3/4" 49 lbs 5
4-7/8" 118 lbs 5
7-3/32" 8" 15" 189 lbs 7
8-1/16" 8" 21"

3 31175.7000.555-----SSSS-SSLLLLLLSSSSSS 371.351.7050505tttttotooooonnnnnnssssss** * LSSoSmwwctoiekitvoheinetlghl   4-5/8" 6" 10-1/2 35 lbs 5
4-7/8" 6" 10-1/2" 38 lbs 4
4-7/8" 6" 10-1/2" 38 lbs 4
4-3/4" 6-3/8" 12-3/4" 50 lbs 5
6-31/32" 8" 119 lbs 5
7-15/16" 8" 15" 191 lbs 7
20-7/8"

SP

.725-S-SPP 0.75 ton Swivel 3-7/16" 3-5/8" 6-1/2" 9 lbs 5
2 tons Padded 3-15/16" 4-1/8" 6-1/2" 15 lbs 4

SS

.725-S-SSS 02.7t5ontosn SSmwoivoethl 3-1/16" 3-5/8" 6-1/2" 9 lbs 5
3-9/16" 4-1/8" 6-1/2" 15 lbs 4 

RP 3 7.513172..0500755-----5R--RRRRRR-PRPPPPPP P 0.75 ton 3-1/8" 3-5/8" 6-1/2" 9 lbs 5
2 tons 3-5/8" 4-1/8" 6-1/2" 15 lbs 4
371..7055ttotoonnnsss** * PRadigdided 4-3/16" 5-3/4" 10-1/2" 29 lbs 5
15 tons* 4-7-16" 5-3/4" 10-1/2" 33 lbs 4
30 tons* 4-7/16" 5-3/4" 10-1/2" 33 lbs 4
50 tons* 4-5/16" 6-3/8" 12-3/4" 42 lbs 5  
6-3/4" 107 lbs 5
7-3/4" 8" 15" 179 lbs 7
8" 21" 5
4
RD 3 71135..005075----5-RRRRR-RDDDDDD 3731.1.700555ttttootooonnnnnsssss*** * SRSwptiigiektiheedls 4-1/16"** 5-5/8" 10-1/2" 29 lbs 4
50 tons* 4-5-16"** 5-5/8" 10-1/2" 32 lbs 5  
4-5/16"** 5-5/8" 10-1/2" 32 lbs 5
4-3/32"** 6-3/8" 12-3/4" 38 lbs 7
6-1/8"** 105 lbs 5
7-1/8"** 8" 15" 176 lbs 4
8" 21" 5
4
RS 3.7.275-5R-R-SRS S 0.75 ton 3-3/4" 3-5/8" 6-1/2" 8 lbs 4
75113.00505-----RRRRRSSSSS 371.1.720555ttttootooonnnnnssss s** * SRSmwtiogietoihedtlh 3-1/4" 4-1/8" 6-1/2" 15 lbs 5  
30 tons* 3-11/16" 5-5/8" 10-1/2" 29 lbs 5
50 tons* 3-15-16" 5-5/8" 10-1/2" 32 lbs 7               
3-15/16" 5-5/8" 10-1/2" 32 lbs
3-13/16" 6-3/8" 12-3/4" 43 lbs Weight
5-3/4" 105 lbs 3 lbs
6-3/4" 8" 15" 176 lbs 6 lbs
8" 21" 12 lbs
10 lbs
* Width dimension of top exceeds roller trame width **Height to topof spike 12 lbs
25 lbs
ACCESSORIES

Steering Handles with Safety Grips
SPECIFICATIONS
Item # Fits Fits Description Length
One Part Handle 15"
3-KH FT 3 Ton Kits Nylon 2 Ton Kits One Part Handle 30"
8-KH FT 8 Ton Kits Nylon 4 Ton Kits One Part Handle 48"
KDH48F FT 15 - 60 Ton Kits Nylon 8 - 24 Ton Kits One Part Handle 36"
H36F FT 3.75 - 15 Ton Rollers Nylon 2 - 6 Ton Rollers One Part Handle 48"
H48F FT 3.75 - 30 Ton Rollers Nylon 2 - 10 Ton Rollers One Part Handle 60"
H60F FT 3.75 - 50 Ton Rollers Nylon 2 - 10 Ton Rollers

186 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

ROUST-A-BOUT & DUCT HOIST

C D 15' & 25' Roust-A-Bouts

SPECIFICATIONS 780301 780303
Item #
Description
Capacity R-150 Roust-A-Bout R-250 Roust-A-Bout
R-150 1,500 lbs R-250 1,500 lbs
B Max Height 15' 2-1/2" 25'-3/8"
Weight 336 lbs 493 lbs
A A 79"

B 20" 119"
30"
C/D 12" 17.5"
Base Dimension 40 x 40" 60 x 60"
Accessories None R-250 Tee-Head Extension Bar

R-250 TEE-HEAD EXTENSION BAR
Item # 781062
For Use With
Description R-250 25 ft Roust-A-Bout
CEaaspeacoiftyU se Allows the R-250 Roust-A-Bout to lift wider loads
Dimensions / Weight 1,000 lbs
Takes minutes to attach and detach
A 37" B 73" C (Length) 68" / 33 lbs

16' Duct Hoist

SPECIFICATIONS 2416
Item #
Height Max. (Forks Up)
Height Max. (Forks Down) 16' 11-3/8"
Lift Capacity 15' 11-5/8"
Height Stowed 450 lbs
Length Stowed 62.8"
Length Operating 23"
Width Stowed 48"
Width Operating 26.4"
Winch Cranks Per Foot 55.25"
Weight 8
243 lbs

CABLE STAY BRAKE SPECIFICATIONS
Item # 784755

Description Each mast and carriage can have a factory installed
gravity actuated brake, which holds loads in place should the cable go slack.

16' FORK EXTENSION SPECIFICATIONS
Item # 784695
Description Button operated fork extender and retractor
WFoerikghEtxCteanpsaiocnityRRanegdeu ction 23.3" to 29.8"
200 lbs (marked on extender)

PIPE CRADLE SPECIFICATIONS 783705
Item #
Description Slide over forks for air hoist and other HVAC applications
Quantity Packaged two per set

TRAY SPECIFICATIONS 784320
Item # Steel tray slides onto forks
Description 24" x 28"
Dimensions

187

MAGSWITCH

Lifting Magnet

SPECIFICATIONS

Item # 8100364
Nominal Max Breakaway Force 1*2* 2217 lbs
Nominal Max Shear Force 1*2* 441 lbs
Full Saturation Thickness 3* 0.750"
Min. Thickness for De-Stack 1*2* 0.374"
Magnetic Pole Footprint 8.78" x 2.80"
Weight 20.5 lbs
Material Thickness Chart for material thickness / maximum force in Product Rsources tab

MATERIAL THICKNESS

MDeapxtimh um 1.5" 1.9" 2.7" 3.0" 3.5" 4.76" 6.35" 9.53" 12.7" 19.05"
Force 1*2*5* 231 lbs 324 lbs 474 lbs 563 lbs 684 lbs 957 lbs 1305 lbs 1769 lbs 2079 lbs 2217 lbs

1* Determined in laboratory environment on SAE1018 Steel with surface roughness 63 micro inches. Many factors contrribute to the actual breakaway force and safe working
load in each application. Consult a Magswitch Applications Engineer and test the Magswitch in each application before deployment.

2* All data applies to unit with flat pole shoes.
3* Determined with SAE1018 Steel L = 0.750"
5* Maximum forces listed above are not safe lifting forces. Designer must take into account safety factor when specifying tool. Magswitch recommends SWL = 5: 1 for most

applicatoins

188 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

LIFTING BAGS

Air Lifting Bags, 1.1 to 77 Ton Lifting Capacity

• Operate on standard shop air, up to 116 psi
• All models feature 2-ply Kevlar® with neoprene
• Light weight for easy set up
• B22A - B77A items feature side holes for attaching bags together
B22A
22 Ton Air Bag 22" x 22"
BHB16A
16' Blue Hose

B22A BC1A
Air Regulator

BC3A
Deadman Controller
BHY16A
16' Yellow Hose

SPECIFICATIONS
Item # Capacity Maximum Length Width Thick Air Required Max Weight
Lifting @116 psi Burst
Pressure
(tons) (A) (B) (C) (cu/ft) (psi) (lbs)

B1A 1.1 2.7" 6" 6" 1.1" 0.18 464 1.38

22-888110G2 1.5 3.0" 6" 6" 3/4" - - 1.2

B3A 3.1 5.1" 9" 9" 1.1" 1.53 464 2.8

22-888120G2 3.5 3.5" 6" 12" 3/4" - - 2.3

22-888130G2 5.4 5.4" 10" 10" 3/4" - - 3.1

B6A 6.4 5.9" 12" 12" 1.1" 1.48 464 5.3

22-888135G2 8.2 6.4" 12" 12" 7/8" - - 5.5

B11A 10.8 7.0" 15" 15" 1.1" 3.04 464 8.8

22-888138G2 12.9 7.1" 12" 18" 7/8" - - 8.3

22-888140G2 13.7 8.1" 15" 15" 7/8" - - 8.8

B14A 14.2 8.6" 18" 18" 1.1" 5.37 464 11.6

22-888150G2 19.0 9.0" 15" 21" 7/8" - - 12.0

B22A 22.7 10.6" 22" 22" 1.1" 10.45 464 17.8

22-888160G2 25.6 10.8" 20" 20" 7/8" - - 15.9

B28A 27.7 11.8" 24" 24" 1.2" 14.7 464 24.6

22-888165G2 34.0 11.8" 20" 26" 7/8" - - 20.1

B35A 35.3 14.1" 27" 27" 1.2" 21.9 464 29.9

22-888170G2 38.0 13.0" 24" 24" 7/8" - - 22.0

22-888180G2 39.5 9.5" 15" 42" 7/8" - - 24.5

B46A 46.4 16.5" 31" 31" 1.2" 32.5 464 40.1

22-888190G2 52.7 15.3" 28" 28" 7/8" - - 30.0

B59A 58.8 17.7" 35" 35" 1.2" 46.8 464 49.6

22-888195G2 69.7 17.0" 32" 32" 1" -- - 45.2

B77A 77 20.5" 38" 38" 1.2" 53.1 464 55.8

22-888200G2 89.2 20.0" 37" 37" 1" - - 58.0

189

DRILLING & CUTTING

SAWS

20" Pneumatic Concrete Chain Saw

SPECIFICATIONS CS 536163-3
Item # 6.5 hp
Power 5700 rpm
No Load Speed 20"
Max. Depth of Cut 124 cfm @ 90 psi 6 bar
Motor Specifications* 104 in/lbs
No Load Torque 88 dB(A)
Noise Level at 3 ft 34 lbs
Weight w/ Bar & Chain

* When operating a compressor with pressure greater than 90 PSI, it is recommended to use a “service”
unit with pressure regulator” in-line to prevent over-speeding the saw.

18" Pneumatic Hand-Held Concrete Saw

SPECIFICATIONS CSH 150
Item # Hand-Held
Saw Type 9.5
Power H.P. 3200 rpm
No Load Speed 7"
Max Depth Cut 18"
Max. Blade Capacity 92
CFM @ 100 psi Gearbox
Drive 28 lbs
Weight

14" Gas Powered Chop Saw

SPECIFICATIONS TS 420
Item # Hand-Held
Saw Type 24 oz
Fuel Capacity 5,350 rpm
Max. Spindle Speed 20 mm
Arbor Size 14"
Maximum Wheel Size 4.9"
Maximum Cutting Depth 21.2 lbs
Weight

Super Heavy-Duty Cutting Nibbler

SPECIFICATIONS N1000-0
Item #
CCMMWuueionttitttgiomiinnhr ggut mSCpaRepaeaddci iut sies 132MG62-eiS"laldpbresS1et:dee3l.:250.f3t/7m5i"n Stainless: 0.276" Aluminum:
Gear 2: 5.25 ft/min .05"

Gas Rail Saw See Associated Rail Drill
on Next Page
SPECIFICATIONS
MWRADWIteirPomhebmMtieo.goerh#r l t SS izi zee 4HXK11476"6-1T10".2o7807r.ql05bm "7sa.W8x H9P.577.2"5Lin292.c7y2c"le gas
ACCESSORIES

Item # 0127601 0127611 04420 04415 04419

Description K1270 K1270 Trak-Blade™ Trak-Blade™ Trak-Blade™
Gas Powered Rail Saw 16" Hi-Performance 16" Cut-Off 14" Cut-Off
Rail Saw w/ Large Clamp Zirconia Wheel Wheel

191

DRILLS RailBoss™ Gas Powered Bonding Drill

See Associated Rail Saw SPECIFICATIONS
on Previous Page

Item # RB30
Motor
2.5 HP Honda 4-Stroke with Oil Alert, No Mixing Gas
RPM 150
Diameter Drills holes up to 11/16" diameter
Capacity 70-155 LB rail
Drill Speed No bog down drilling 7/8" to 1-1/2" diameters in fully heat-treated rail
under 15 seconds using Trak-Star Twister™ Bits
Handle Quill feed spindle and single stroke feed handle allows operator to stand
Weight when drilling
45 lbs

ACCESSORIES
Black TiAIN Coated Carbide Tip
Cutter Item # Cutter Item # Cutter Size Decimal Equivalent
15324 18-15224 .7500
15328 18-15228 3/4" .8750
15330 18-15230 7/8" .9375
15332 18-15232 15/16" 1.0000
15334 18-15234 1" 1.0625
15336 18-15236 1-1/16" 1.1250
15338 18-15238 1-1/8" 1.3125
15340 18-15240 1-3/16" 1.2500
15342 18-15242 1-1/4" 1.3125
15344 18-15244 1-5/16" 1.3750
15346 18-15246 1-3/8" 1.4375
15348 18-15248 1-7/16" 1.5000
15352 18-15252 1-1/2" 1.6250
15354 18-15254 1-5/8" 1.6875
1-11/16"

Lackmond® Beast/B+BTec Hand Held Core Drill

SPECIFICATIONS

Item # BCR 150/5MG
MApoptolicr ations
Ideal for horizontal drilling
115 V, 3-Speed Gearing, 60 Hz
Motor PHoowuseirn g A2.l6umHiPn,u2m000 W
Motor
Wet/Dry Drilling Yes
3/8" – 5-1/8"
Dry MHaonudnhteedldDDrrilillilninggininCMoanscorentrey:: 3/4" – 6-1/2"
Bit Range Rig 3/8" – 5-1/8"

Wet Handheld Drilling in Concrete: 3/8" – 1-1/2"
No Load Speed 900 / 2180 / 4290 rpm
1-1/4" - 7 & 1/2" thread combo spindle
SDpiainmdeleteTr hreading 5/8" -11 thread adapter included
5" Capacity
Gear Selection 21nstdGGeeaarr::21-"1/–42"-–3/58-"7/8"
3rd Gear: 3/8" – 1-3/8"
LED Overload Indicator Yes
Digital Read-Out Option Yes
WGraipteTryFpleo w Indicator YMeisd-Handle
Water VWalevieghPtr otection Y1e7s-1/2"
Dim. / x 12" x 4-1/2" / 16 lbs

192 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

DRILLS

Lackmond® Beast/B+BTec Professional Mast Mounted Core
Drill Rig

SPECIFICATIONS
Item # BCR300/12
BMMioot ttRooarr nPgoew er
Spindle Threading 115 V, 3-speed gearing, 60 Hz, motor house protection
3.2 HP, 2400 W
1" – 12"
1-1/4" – 7
D TWDDDQDSLeitiiiroulamagatidwiltmniclFeti.Onndkaor/egflvrtRSFeWReeADelpeorreednlel ewioeagcgpSaadhsltIsdep-hn tOe idDnIInuniSdrcdtdillalieiOlidcitc noeapag rttt oi ioorn n LSYYYYYQ2F5eeeee3/otu28isssss"rci6"ckhs-k–eot3arsl1/en8n1sd"atupxwhprWrietethaov1det1r2raas2"nde"xsadppHootewr3tr6ani"tfnieocenlud/ wdse6hpd6eineldblslse

Makinex® Hose To Go Constant Water Supply Unit

An easy to use dust suppression tool and portable water supply.
• Provides a constant flow of water to suppress dust when cutting, core drilling, and grinding concrete.
• 3.7 gallon capacity and up to 30 minutes of constant flowing water
• No pump means greater reliability
• No need to manually pump to get the water pressure you need
• No complicated electrics
• No battery to go flat
• No need to drag hoses around the job-site
• Handle with two easy carrying positions

SPECIFICATIONS H2GO-14
ICteampa#c ity P3.l6a5cegdalHloonrsiz&o3n0tamllyin: uLte3s1.o5f"cxonWst5a.n7t", fxloHw1in2g.8w"ater
Dimensions Placed Upright: L 12.8" x W 5.7" x H 31.5"
Weight Dry: 12.6 lbs Wet: 43 lbs
Continuous Output Pressure 7-10 psi

193

MAGNETIC DRILL PRESSES

Ultra Low Profile Portable Mag Drill, 1-3/8" x 1"
SPECIFICATIONS
Item # HMD130
Electrical System 115V, 50/60A Hz –9A, 1035W
Motor
Diameter 187/A"1 6(1"2–0V1)-3/8"
Depth of Cutter
Cutter/Mount
Weight RotaLoc Plus™ Cutters with push & turn style shank
B23a.s8e lbs
13/"8P"laPtlea te Dead Lift W 4" x L 9"
Magnet
2165 lbs D rillpoint Breakaway 735 lbs
1200 lbs 500 lbs

Portable Mag Drill (Optional Swivel Base), 1-1/2" x 2"
SPECIFICATIONS
Item # HMD904
Electrical System 115V, 50/60A Hz –9A, 1035W
Motor
Diameter 728/"A1 6(1"1–5V1)-1/2"
Depth of Cutter
Cutter/Mount
Weight 12,000 Series Annular Cutters, Copperhead™ Carbide Cutters, 3/4" Shank
B27a.s5e lbs
13/"8P"laPtlea te Dead Lift W 3-1/8" x L 6-9/16 "
Magnet
1750 llbbss Dr illpoint Breakaway 995 lbs
1310 710 lbs

Portable Two Speed Mag Drill with Swivel Base, 2" x 2"
SPECIFICATIONS
Item # HMD905
Electrical System 115V, 50/60A Hz –10A, 1150W
Motor
Diameter 279"/A1 6(1"1–5V1)-1/2"
Depth of Cutter
Cutter/Mount
Weight 12,000 Series Annular Cutters, Copperhead™ Carbide Cutters, 3/4" Shank
3B5asleb s
13"/8P"laPtlea te Dead Lift 113715W00 llbb3-ss1 /8" x L 6-9/16"
Magnet D rillp oint Breakaway
995 lbs
710 lbs

Portable Magnetic Drill, 2-1/16" x 3"
SPECIFICATIONS
Item # HMD914
Electrical System 115V,50/60A Hz –12.2A, 1403W
Motor
Diameter 115V, –112.-21A/1, 63"5 0 rpm
73/"1 6"
Depth of Cutter
Cutter/Mount
Weight 12,000 Series Annular Cutters, Copperhead™ Carbide Cutters, 3/4" Shank
B41asleb s
13/"8P"laPtlea te Dead Lift W 3-1/8" x L 6-9/16"
Magnet
2230 llbbss D rill point Breakaway 1180 lbs
1245 795 lbs

Two Speed Portable Magnetic Drill w/ Swivel Base, 2-3/8" x 3"

SPECIFICATIONS
Item # HMD917
Electrical System 115 V, 50/60A Hz –13.5A, 1553W
Motor
Diameter 12.5A –(121-53V/8) "
Depth of Cutter 73/"1 6"
Cutter/Mount
Weight 12,000 Series Annular Cutters, Copperhead™ Carbide Cutters, 3/4" shank
B46asleb s
13/"8P"laPtlea te Dead Lift W 3-1/2" x L 7-3/4"
Magnet
2230 llbbss Dr illpoint Breakaway 1290 lbs
1245 825 lbs

Two Speed Portable Magnetic Drill w/Swivel Base, 2" x 6"

SPECIFICATIONS HMD918
Item #
Electrical System 115V,50/60A Hz –13.5A, 1553W
Motor
Diameter 12.5A (115V), 250/450 rpm
Depth of Cutter 7/16" – 2-3/8"
Cutter/Mount Up to 3", 4" to 6"
12,000 Series Annular Cutters, Copperhead™ Carbide Cutters, 3/4" Shank
Weight 44.2 lbs
Base W 3-1/2" x L 7-3/4"
Magnet 31/"8P"laPtlea te Dead Lift 2385 lbs
1635 lbs D rillpoint Breakaway 1195 lbs
765 lbs

194 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

MAGNETIC DRILL PRESSES

Two Speed Portable Magnetic Drill, 2-3/8" x 3"

SPECIFICATIONS HMD505
Item #
Electrical System 115V,50/60A Hz –15A, 1725W
Motor
Diameter 174/1A6,"2–502/-435/80"r pm
Depth of Cutter 3"
Cutter/Mount
Weight 12,000 Series Annular Cutters, Copperhead™ Carbide Cutters, 3/4" Shank
45 lbs
Base Wlbs4 " x L 8"
Magnet 13/"8P"laPtlea te Dead Lift lbs D rillpoint
2560 Breakaway 1080 lbs
1550 820 lbs

28V Cordless Magnetic Core Drill, 3-1/4" x 2"

SPECIFICATIONS
Item # MAG28LTX32
Electrical System Metabo 25.2V Lithium-Ion Battery, 3.0 Ah
Motor
Diameter Metabo LTX
Depth of Cutter 21-"1 /2" – 1-1/4"
Cutter/Mount
Weight Morse Tapper MT2, 3/4" Weldon Shank
35 lbs
Base W 2-3/4" x L 7-1/2"
Magnet 31/"8P"laPtela te De ad Lift 2500 lbs
D rillpoint Breakaway –
–

Two Speed Portable Magnetic Drill, 3-1/16" x 3"

SPECIFICATIONS
Item # HMD915
Electrical System 120V,50/60A Hz –11A, 1265W
Motor
Diameter 714/1A6,"25–02/4-35/08"rp m
Depth of Cutter 3"
Cutter/Mount
Weight 42/43,000 Series Annular Cutters, Can Use "12,000-Series" Cutters w/ adapter, 1-1/4" Shank
B69aslbes
31/"8P"laPtlea te Dead Lift W 5" x L 7"
Magnet lbs D rillpoint
2565 lbs Breakaway 1390 lbs
1080 470 lbs

Four Speed Portable Magnetic Drill, 3-1/16" x 3"

SPECIFICATIONS HMD933
Item #
Electrical System 115 V, 50/60A Hz –13.5A, 1553W
Motor
Diameter 12A (115V), 70/120/220/200/332 rpm
Depth of Cutter 5/8" – 3-1/16"
Cutter/Mount 3"
42/43,000 Series Annular Cutters, Can Use "12,000-Series" Cutters w/ adapter, 1-1/4" Shank
Weight 72 lbs
Base W 5" x L 7"
Magnet 31/"8P"laPtlea te Dead Lift llbbss D rillpoint Breakaway
2565 1390 lbs
1080 470 lbs

Four Speed Portable Magnetic Drill, 4-1/16"

SPECIFICATIONS MAB825
Item #
Motor H41-2oG.l5eeAaCr(1aV1pa5arVcia)i,tby7l:0e4/1S-12p/0e1/e62d"00CT/3oa3np2tprironplg:m4C 0a-1p1a0c,it6y5: -11-715/8, "14T0w-3i6st0,D2r0il0l -C6a0p0arcpimty: 1-1/4"
Speeds 10"
Diameter
Depth of Cutter
Cutter/Mount
Weight 3/4" & 1-1/4" Weldon Shank
B68asleb s
Magnet 31/"8P"laPtlea e Dead Lift lbWs 4-1/2" x L 8-5/8" –
Dril lpoint –
6 600 Breakaway

195

MAGNETIC DRILL PRESSES

Four Speed Portable Magnetic Drill, 3-1/16"
SPECIFICATIONS
Item # MAB850
Motor 16A 110V
Speeds
Diameter H3 ole Capacity: Tapping Capacity: Twist Drill Capacity: 1-1/4"
Depth of Cutter 4" 3-1/16" * 1-1/8"

Cutter/Mount 3/4" arbor bore
Weight
B53asleb s W 4-1/3" x L 8-58"
Magnet 13"/8P"laPtlea te D ead Lift 6,000 Drillpoint Breakaway –
lbs

* 3-1/16" cutters have 1-1/4" Weldon shank. ZIA 30/32 arbor is required.

Four Speed Portable Magnetic Drill, 5-1/8"
SPECIFICATIONS
Item # MAB1300
Motor 20A 110V
Speeds
Diameter H320"o-wl8e/0C,R5ae0pta-a1inc2ei0try,,:1513-001-w/38/5"o0,RT2ae1pta0pi-ni5ne5gr"0 Crappmacity: 1-5/8" Twist Drill Capacity: 1-3/4"
Depth of Cutter
Cutter/Mount
Weight 1-1/4" arbor bore (3/4" adapter included)
B11a2sel bs
31"/8P"laPtlea te D ead Lift 23,600 W 4-3/4" x L 14"
Magnet lbs Drillpoint
Breakaway 21,100 lbs

AIRBOR™ ATEX-Certified Portable Pneumatic Magnetic Drill, 2-1/16"

SPECIFICATIONS
Item # AS-4300
Certifications
Motor Power
Air Cons. @ 90 (psi) 16A (110V)
Diameter 64 CRM 1/2" NPT Air Connection
Depth of Cutter 2-1/16"
3"
Cutter Mount 3/4" Weldon Shank
Weight
38 lbs W 8-3/4" x L 3-1/2"
Base
Magnet 31/"8P"laPtlea te De ad Lift 16,000 lbs D rillpoint Breakaway
–

TAPPING KIT

Hougen Tapmatic Tapping Kit, #10 – 1/2" Tap Capacity

• The 08180 Kit is used to install a Tapping Attachment onto the HMD917/918 “Slot Drive” spindle.
• Lightweight, easy to install design incorporates a planetary gear reverse with a 1:1 ratio.
• Reversing speed is equal to spindle speed, so in-feed and out-feed of the unit can be employed without
reversing motor direction.
• Tapping Kits are not recommended for use with swivel base drills.
• When using a two speed drill always tap in low gear (250 RPM).
SPECIFICATIONS
Item # 20483
For Use With
Hougen HMD917 and HMD918 Magnetic Drills
Includes Adapter: 08179 Tapping Kit: 08180
Collet 10807
Tap Capacity #10 – 1/2"

196 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

ANNULAR CUTTERS

ROTABROACH® ROTABROACH®
12,000-Series Annular Cutters 42/43,000-Series Annular Cutters

SPECIFICATIONS Item # SPECIFICATIONS Item #
Cutter Diameter 1" D. O.C. 2" D.O.C. M2 Tin Coated
Use with Pilot 10532 3" D.O.C. C u tter Diameter M2
10531 – 3/4" WELDON SHANK - 2" Depth of Cut
12114 12214 – 3/4" 42024 22024
7/16" 12116 12216 – 13/16" 42026 22026
1/2" 12118 12218 – 7/8" 42028 22028
9/16" 10527 10528 24131 15/16" 42030 22030
12120 12220 – 1" 42032 22032
Use with Pilot 12122 12222 –
12124 12224 3-12224
5/8" 12126 12226 3-12226 1-1/16" 42034 22034
11/16" 12128 12228 3-12228 42036 22036
3/4" 12130 12230 3-12230 1-1/8" 42038 22038
13/16" 12132 12232 3-12232 1-3/16"
7/8" 12134 12234 3-12234 1-1/4" 42040 22040
15/16" 12136 12236 3-12236 42042 22042
1" 12138 12238 3-12238 1-5/16" 42044 22044
1-1/16" 12140 12240 3-12240 1-3/8"
1-1/8" 12142 12242 3-12242 1-7/16" 42046 22046
1-3/16" 12144 12244 3-12244 1-1/4" WELDON SHANK - 2" Depth of Cut
1-1/4" 12146 12246 3-12246 42048 22048
1-5/16" 12148 12248 3-12248 1-1/2" 42050 22050
1-3/8" 12150 12250 3-12250 1-9/16"
1-7/16" 12152 12252 3-12252 1-5/8" 42052 22052
1-1/2" 12154 12254 3-12254 42054 22054
1-9/16" 12156 12256 3-12256 1-11/16" 42056 22056
1-5/8" 12158 12258 3-12258 1-3/4"
1-11/16" 12160 12260 3-12260 1-13/16" 42058 22058
1-3/4" 12162 12262 3-12262 42060 22060
1-13/16" 12164 12264 3-12264 1-7/8" 42062 22062
1-7/8" 1-15/1"
1-15/16" – 12266 3-12266 2 " 42064 22064
2" – 12268 3-12268 1-1/4" WELDON SHANK - 3" Depth of Cut
2-1/16" – 12270 3-12270 43066 23066
2-1/8" – 12272 3-12272 2-1/16" 43068 23068
2-3/16" – 12274 3-12274 2-1/8" 43070 23070
2-1/4" – 12276 3-12276 2-3/16" 43072 23072
2-5/16" 2-1/4" 43074 23074
2-3/8" 2-5/16" 43076 23076
2-3/8" 43078 23078
PILOTS - "12,000-Series 2-7/16" 43080 23080
2-1/2" 43082 23082
SPECIFICATIONS 2-9/16" 43084 23084
2-5/8" 43086 23086
Item # Description 2-11/16" 43088 23088
2-3/4" 43090 23090
10531 1" D.O.C. Pilot 7/16" - 9/16" 2-13/16" 43092 23092
10532 2" D.O.C. Pilot 7/16" - 9/16" 2-7/8" 43094 23094
10527 1" D.O.C. Pilot 5/8" - 2" 2-15/16" 43096 23096
10528 2" D.O.C. Pilot 5/8" - 2-3/8" 3" 43098 23098
24131 3" D.O.C. Pilot 3/4" - 2-3/8" 3-1/16"
4-10528 4" Pilot for Extended Reach “12.000-Series”
6-10528 6" Pilot for Extended Reach “12.000-Series” Only for use with
Hougen®

HMD915 & HMD933

197

ANNULAR CUTTERS

ROTABROACH® PLUS™ Annular Cutters M2 HSS 1" D.O.C.
(For HMD150)

SPECIFICATIONS Cutter Diameter
Item # 7/16"
1/2"
(Use with Pilot 17470) 17/32"
17814** 9/16"
17816 5/8"
17817 11/16"
17818 3/4"
17820 13/16"
17822 7/8"
17824 15/16"
17826 1"
17828 1-1/16"
17830 1-1/8"
17832 1-3/16"
17834 1-1/4"
17836 1-5/16"
17838 1-3/8"
17840
17842
17844

ROTALOC PLUS™ Pilots

SPECIFICATIONS Description
I tem # For use with HMD150

17470

Extended Reach Cutters

• Extra reach in deep hole drilling applications
• Each cutter features the same cutting geometry and action as the standard depth Rotabroach®
cutters, but in the extended 4" and 6" depth of cut
• Also available with stack-cut geometry
• Made in the USA

SPECIFICATIONS
Item #
4" D.O.C. Cutter Diameter
6" D.O.C.

4-12226 6-12226 13/16"
4-12230 6-12230 15/16"
4-12234 6-12234 1-1/16"
4-12238 6-12238 1-3/16"

Extended Reach Pilots

SPECIFICATIONS Item # Description
6-10528 For use with Extended Reach Cutters

4-10528

198 Greater Detroit, Greater Chicago, Greater St. Louis • 877.446.4352 www.superiortoolrental.com

MAGNETIC DRILL ACCESSORIES ROTALOC™ Spindle Adapters
High Speed Annular Cutters w/ Pin

SPECIFICATIONS
Item # Description
1074678708 RReoptalaLcoecm™enAtdAapdtaeprteArssembly
04780 Replacement Pilot

MADE INTHE USA

SPECIFICATIONS Ratchet Drives

Cutter Item 3#" Depth of Cut Type Shank SPECIFICATIONS
D iameter Cut Size Item # Description
2" Depth of 02449 For use with Model HMD904
99999999999999999666666666666666-----------------6666666666611111111111111111--------------------------111111111111111-----------------1111111111122222222222222222--------------------------222222222222222111111111111111112222222222211111111111111134635635335445445899997988881020021101021228646024482200682008842662408444026828280066 CCCCCCCCCCCCCCCCC 99999999999999999666666666666666-----------------6666666666611111111111111111--------------------------111111111111111-----------------1111111111133333333333333333--------------------------333333333333333111111111111111113333333333311111111111111135553433455634464989798989881220211011200026084202882060426402604642888442626280468800 CCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCAAAAAAAAAAAAAAAAAHHHHHHHHHHHHHHHHHHHHHHHHHHRRRRRRRRRRRRRRRRRSSSSSSSSSSSSSSSSSSSSSSSSSSBBBBBBBBBBBBBBBBBSSSSSSSSSSSSSSSSSSSSSSSSSSIIIIIIIIIIIIIIIIIDDDDDDDDDDDDDDDDD EEEEEEEEEEEEEEEEE 1111111111111111111111111111111113333333333---------------------------------/11111111111111111111111111111111/////////14444444444/////////////////////////////////44444444444444444444444444444444"""""""""4""""""""""""""""""""""""""""""""" For use with Models HMD505 &
2-7/16" 24 154 HMD508 (requires 1" socket)
2-1/2"
2-9/16"
2-5/8" Pipe Adapter Kits
2-11/16"
2-3/4" SPECIFICATIONS Description
2-13/16" Item # Chain Mount for use with
2-7/8" 02564 HMD904, HMD014, HMD505/508
2-15/16" Bracket Mount for use with HMD915
3"
3-1/16" 10726
3-1/8"
3-3/16" Drill Handle Description
3-1/4" Handle to fit Hougen® Motors
3-5/16" SPECIFICATIONS
3-3/8" Item #
3-7/16" 07021
3-1/2"
3-9/16" Swivel Base Upgrade Kits
3-5/8"
3-11/16" SPECIFICATIONS
3-3/4" Item # Description
3-13/16" 05 757
3-7/8" 05 968 Swivel Base Upgrade Kit - 10904/HMD904/HMD925 (115V)
3-15/16" 00 77004423 Swivel Base Upgrade Kit for HMD904/HMD925/HMD908/HMD928 - (230V)
4" Swivel Base Upgrade Kit for HMD914 (115V) (New style housing only)
4-1/16" Swivel Base Upgrade Kit for HMD914 (230V) (New style housing only
4-1/8"
4-3/16" VAC-PAD™ Description
4-1/4" Vacuum Base Attachment
4-5/16" SPECIFICATIONS
4-3/8" Item #
4-7/16" 05000
4-1/2"
4-9/16" Spindle Adapters
4-5/8"
4-11/16" SPECIFICATIONS
4-3/4" Item # Description
4-13/16" 00400417015200533308834534821609169
4-7/8" HDM904 Chuck Adapter (Old Style Threaded)
4-15/16" HMD915 3/4" Shank Adapter
5" HMD904 & HMD925 Chuck Adapter (Hex Drive)
5-1/8" HMD904 & HMD925 Tapping Adapter (Hex Drive)
1/2" Shank Adapter
HMD915 3/4" Weldon Adapter
HMD914 Chuck Adapter

Drill Chucks

Arbor Extenders SPECIFICATIONS Description

SPECIFICATIONS Item #
10731
Item # Description 10737 1/2" Hougen® Chuck with Key (HMD904, HMD914 & HMD925)
10100 1" Arbor Extender Assembly 10732 5/8" Hougen® Chuck with Key (HMD914)
10200 2" Arbor Extender Assembly 10738 1/2" Jacobs® Chuck with Key (HMD904, HMD914 & HMD925)
07930 5/8" Jacobs® Chuck with Key (HMD914)
07931 Replacement key for 1/2" Chucks
Replacement key for 5/8" Chucks

199

COMMUNICATIONS