2018 Superior Tool Rental & Repair Catalog

HYDRAULIC CYLINDERS RAC-Series, Single-Acting Aluminum Cylinders
RR-Series, Double-Acting Cylinders

RR-506 to RR-50048 models

Cylinder Stroke Ext. Outside Collap. Model Cylinder Stroke Collap. Ext. Outside Weight Model
Capacity Height Diam. Height No. Height Diam. No.
(in) Capacity Height
(ton) (in) RR-506 BD RAC-202
6.13 BD RR-5013 (ton) A (in) (in) (lbs) RAC-204
50 13.13 (in) (in) 13.06 RR-5020 (maximum) (in) (in) RAC-206
75 20.13 20.06 RR-756 8.82 3.35 7.9 RAC-502
100 6.13 19.19 5.00 28.88 RR-7513 20 1.97 6.85 12.76 3.35 9.0 RAC-504
150 13.13 33.19 5.00 13.69 RR-1006 (24.1) 3.94 8.82 16.69 3.35 10.1 RAC-506
6.63 49.00 5.00 20.69 RR-10013 9.29 5.12 18.7 RAC-1004
200 13.13 19.81 5.75 14.06 RR-10018 5.91 10.79 13.23 5.12 21.6 RAC-1006
18.13 33.81 5.75 20.63 RR-1502 17.17 5.12 24.5 RAC-1008
300 2.25 20.69 7.00 27.06 RR-1506 50 1.97 7.32 14.61 7.09 43.2
6.13 33.75 7.00 7.72 RR-15013 (54.9) 3.94 9.29 18.54 7.09 48.3
400 13.13 45.19 7.00 15.19 RR-15032 5.91 11.26 22.48 7.09 53.4
32.13 9.44 8.00 22.20 RR-2006
500 6.00 21.31 8.00 43.94 RR-20013 100 3.94 10.67
13.00 35.31 8.00 16.94 RR-20018 (110.9) 5.91 12.64
18.00 76.06 8.00 23.94 RR-20024 7.87 14.61
24.00 22.94 9.75 30.13 RR-20036
36.00 36.94 9.75 36.13 RR-20048 RACL-Series, Aluminum Lock Nut Cylinders
48.00 48.13 9.75 48.13 RR-3006
6.00 60.13 9.75 60.13 RR-30012 Cylinder Stroke Collap. Ext. Outside Weight Model
12.00 84.13 9.75 19.13 RR-30018 Height Height Diam. No.
18.00 108.13 9.75 25.13 RR-30024 Capacity (lbs)
24.00 25.13 12.25 31.13 RR-30036 A B D 11.9 RACL-302
36.00 37.13 12.25 37.13 RR-30048 (ton) (in) (in) (in) 13.4 RACL-304
48.00 49.13 12.25 49.13 RR-4006 (maximum) (in) 14.9 RACL-306
6.00 61.13 12.25 61.13 RR-40012 9.10 11.07 3.94 20.5 RACL-502
12.00 85.13 12.25 21.19 RR-40018 30 1.97 11.07 15.01 3.94 23.4 RACL-504
18.00 109.13 12.25 27.19 RR-40024 (34.2) 3.94 13.04 18.95 3.94 26.2 RACL-506
24.00 27.19 14.13 33.19 RR-40036 5.91 9.29 11.26 5.12 48.2 RACL-1002
36.00 39.19 14.13 39.19 RR-40048 50 1.97 11.26 15.20 5.12 53.3 RACL-1004
48.00 51.19 14.13 51.19 RR-5006 (54.9) 3.94 13.23 19.13 5.12 58.4 RACL-1006
6.00 63.19 14.13 63.19 RR-50012 5.91 11.65 13.62 7.09 71.0 RACL-1502
12.00 87.19 14.13 22.75 RR-50018 100 1.97 13.62 17.56 7.09 79.8 RACL-1504
18.00 119.19 14.13 28.75 RR-50024 (110.9) 3.94 15.59 21.50 7.09 88.6 RACL-1506
24.00 28.75 15.63 34.75 RR-50036 5.91 12.72 14.69 9.06
36.00 40.75 15.63 40.75 RR-50048 14.69 18.62 9.06
48.00 52.75 15.63 52.75 16.65 22.56 9.06
64.75 15.63 64.75
88.75 15.63
112.75 15.63

150 1.97
(175.9) 3.94
5.91

www.SuperiorToolRental.com 877-446-4352 51

HYDRAULIC CYLINDERS CULP-Series, Ultra Flat Cylinder, Stop Ring

CLP-Series, Pancake Lock Nut Cylinders
Single-Acting

Cylinder Stroke Collapsed Extended Outside Oil Wt. Model
Capacity (in.) Height Height Dia. Cap. (lbs) No.

@ (in.) (in.) (in.) (in.) CULP10*
10,150 psi CULP20*
CULP30*
ton (max) CULP50*

Cylinder Stroke Collap. Ext. Outside Weight Model 10 (10.9) 0.24 1.08 1.32 2.83 0.51 2
20 (22.2) 0.24 1.26 1.50 3.54 1.04 4
Capacity Height Height Diam. No. 30 (34.8) 0.24 1.38 1.61 4.31 1.62 6
50 (61.8) 0.24 1.75 1.99 5.12 2.88 10

(ton) A B D * Coupler AR630 including dustcap: Use HB7206 hose including AH630 coupler
[max] (in) (in) (in) (in) (lbs) to connect to your pump.

60 CUSP-Series, High Tonage Ultra Flat Cylinder, Tilting Plunger
[67.1] 1.97 4.92 6.89 5.51 33 CLP-602

100
[113.7] 1.97 5.39 7.36 6.89 57 CLP-1002

160 1.77 5.83 7.60 8.66 97 CLP-1602
[179.2]

200 1.77 6.10 7.87 9.65 125 CLP-2002
[221.3]

250 1.77 6.26 8.03 10.83 163 CLP-2502
[284.2]

400 1.77 7.01 8.78 13.78 295 CLP-4002
[433.6]

500 Cylinder Tilted Straight Tilting Collapsed Extended Outside Oil Wt. Model
[566.2] 1.77 7.56 9.33 15.75 416 CLP-5002 No.
Capacity Stroke Stroke +/- Height Height Dia. Cap.
RAR - Series, Aluminum Cylinders @
Double-Acting
10,150 psi

ton (max) (in.) (in.) (deg.) (in.) (in.) (lbs) (in3) (lbs)

10 (10.9) 0.24 0.26 2 1.40 1.66 2.83 0.57 2.6 CUSP101)
20 (22.2) 0.24 0.28 2 1.59 1.87 3.54 1.21 4.2 CUSP201)
30 (34.8) 0.24 0.29 2 1.67 1.96 4.13 1.97 6.0 CUSP301)
50 (61.8) 0.39 0.52 4 2.24 2.77 5.12 6.38 12.3 CUSP501)
75 (89.0) 0.39 0.55 4 2.38 2.93 5.91 9.66 17.6 CUSP751)
100 (121.1) 0.39 0.58 4 2.50 3.08 6.69 13.81 23.8 CUSP1002)
150 (178.6) 0.39 0.58 3 2.56 3.12 7.87 19.81 33.7 CUSP1502)
200 (235.0) 0.39 0.59 3 2.72 3.30 9.02 27.15 47.4 CUSP2002)
250 (285.6) 0.39 0.61 3 2.85 3.46 9.92 34.34 60.2 CUSP2502)
300 (355.9) 0.39 0.56 2 2.85 3.41 11.10 38.93 75.08 CUSP3002)
400 (450.5) 0.39 0.57 2 3.05 3.63 12.44 51.01 101.09 CUSP4002)
500 (450.5) 0.39 0.60 2 3.25 3.85 14.02 67.77 138.2 CUSP5002)
600 (6729) 0.39 0.61 2 3.44 4.06 15.20 81.42 172.8 CUSP6002)
750 (846.0) 0.39 0.64 2 3.68 4.32 17.01 106.95 231.9 CUSP7502)

1000 (1142.6) 0.39 0.69 2 4.06 4.74 19.76 154.20 346.1 CUSP10006)

Cylinder Stroke Collap. Ext. Outside Weight Model 1) Coupler AR630 including dustcap: Use HB7206 hose including AH630 coupler to connect to your pump.
No. 2) Coupler CR400 including dustcap: Use HC-Series hose including CH604 coupler to connect to your pump.
Capacity Height Height Diam.

(ton) A B D
(in) (in) (in) (in) (lbs)

1.97 7.91 9.88 5.71 24.5 RAR-502
50 3.94 9.88 13.82 5.71 28.0 RAR-504

5.91 11.85 17.76 5.71 31.5 RAR-506

3.94 11.85 15.79 7.28 42.6 RAR-1004

100 5.91 13.82 19.72 7.28 48.9 RAR-1006

7.87 15.79 23.66 7.28 55.3 RAR-1008

150 5.91 13.71 19.66 9.06 73.2 RAR-1506

52

HYDRAULIC CYLINDERS CLRG-Series, High Tonage Cylinders
CLSG-Series, High Tonage Cylinders
Double-Acting CLRG-50 to 150 CLRG-200 to 1000
Single-Acting

CLSG CLRG

Cylinder Stroke Collap. Ext. Outside Weight Model No. Cylinder Stroke Collap. Ext. Outside Weight Model No.
Capacity Height Height Diam. Capacity Height Height Diam.
AB D CLSG AB D CLRG
(ton) (ton)
[max] (in) (in) (in) (in) (lbs) Single-Acting [max] (in) (in) (in) (in) (lbs) Double-Acting

1.97 6.38 8.35 5.12 37 CLSG-502 1.97 6.38 8.35 5.12 37 CLRG-502
8.35 12.28 5.12 44 CLSG-504 8.35 12.28 5.12 44 CLRG-504
50 3.94 10.31 16.22 5.12 51 CLSG-506 50 3.94 10.31 16.22 5.12 51 CLRG-506
5.91 12.28 20.16 5.12 60 CLSG-508 5.91 12.28 20.16 5.12 60 CLRG-508
[59.1] 7.87 14.25 24.09 5.12 68 CLSG-5010 [59.1] 7.87 14.25 24.09 5.12 68 CLRG-5010
16.22 28.03 5.12 75 CLSG-5012 16.22 28.03 5.12 75 CLRG-5012
9.84 7.16 9.13 6.50 42 CLSG-1002 9.84 7.16 9.13 6.50 42 CLRG-1002
9.13 13.06 6.50 64 CLSG-1004 9.13 13.06 6.50 64 CLRG-1004
11.81 11.09 17.00 6.50 88 CLSG-1006 11.81 11.09 17.00 6.50 88 CLRG-1006
13.06 20.94 6.50 110 CLSG-1008 13.06 20.94 6.50 110 CLRG-1008
1.97 15.03 24.87 6.50 134 CLSG-10010 1.97 15.03 24.87 6.50 134 CLRG-10010
17.00 28.81 6.50 157 CLSG-10012 17.00 28.81 6.50 157 CLRG-10012
100 3.94 7.72 9.69 8.07 86 CLSG-1502 100 3.94 7.72 9.69 8.07 86 CLRG-1502
[102.9] 5.91 9.69 13.62 8.07 115 CLSG-1504 [102.9] 5.91 9.69 13.62 8.07 115 CLRG-1504
7.87 11.65 17.56 8.07 143 CLSG-1506 7.87 11.65 17.56 8.07 143 CLRG-1506
13.62 21.50 8.07 172 CLSG-1508 13.62 21.50 8.07 172 CLRG-1508
9.84 15.59 25.43 8.07 203 CLSG-15010 9.84 15.59 25.43 8.07 203 CLRG-15010
17.56 29.37 8.07 231 CLSG-15012 17.56 29.37 8.07 231 CLRG-15012
11.81 8.50 10.47 9.25 121 CLSG-2002 11.81 8.50 10.47 9.25 121 CLRG-2002
12.44 18.35 9.25 201 CLSG-2006 12.44 18.35 9.25 201 CLRG-2006
1.97 18.35 30.16 9.25 322 CLSG-20012 1.97 18.35 30.16 9.25 322 CLRG-20012
9.25 11.22 10.83 196 CLSG-2502 9.25 11.22 10.83 196 CLRG-2502
3.94 13.19 19.09 10.83 300 CLSG-2506 3.94 13.19 19.09 10.83 300 CLRG-2506
19.09 30.91 10.83 456 CLSG-25012 19.09 30.91 10.83 456 CLRG-25012
150 5.91 12.28 14.25 12.20 406 CLSG-3002 150 5.91 12.28 14.25 12.20 406 CLRG-3002
[153.9] 7.87 16.22 22.13 12.20 511 CLSG-3006 [153.9] 7.87 16.22 22.13 12.20 511 CLRG-3006
22.13 33.94 12.20 668 CLSG-30012 22.13 33.94 12.20 668 CLRG-30012
9.84 14.74 16.71 13.78 595 CLSG-4002 9.84 14.74 16.71 13.78 595 CLRG-4002
18.86 24.59 13.78 728 CLSG-4006 18.86 24.59 13.78 728 CLRG-4006
11.81 24.59 36.40 13.78 928 CLSG-40012 11.81 24.59 36.40 13.78 928 CLRG-40012
16.50 18.46 15.75 884 CLSG-5002 16.50 18.46 15.75 884 CLRG-5002
200 1.97 20.43 26.34 15.75 1058 CLSG-5006 200 1.97 20.43 26.34 15.75 1058 CLRG-5006
5.91 26.34 38.15 15.75 1321 CLSG-50012 5.91 26.34 38.15 15.75 1321 CLRG-50012
[206.1] 11.81 16.89 18.86 16.93 1045 CLSG-6002 [206.1] 11.81 16.89 18.86 16.93 1045 CLRG-6002
20.83 26.73 16.93 1246 CLSG-6006 20.83 26.73 16.93 1246 CLRG-6006
250 1.97 26.73 38.54 16.93 1545 CLSG-60012 250 1.97 26.73 38.54 16.93 1545 CLRG-60012
5.91 18.66 20.63 19.88 1634 CLSG-8002 5.91 18.66 20.63 19.88 1634 CLRG-8002
[284.0] 11.81 22.60 28.50 19.88 1941 CLSG-8006 [284.0] 11.81 22.60 28.50 19.88 1941 CLRG-8006
28.50 40.31 19.88 2332 CLSG-80012 28.50 40.31 19.88 2332 CLRG-80012
300 1.97 22.20 24.17 22.05 2341 CLSG-10002 300 1.97 22.20 24.17 22.05 2341 CLRG-10002
26.14 32.05 22.05 2674 CLSG-10006 26.14 32.05 22.05 2674 CLRG-10006
[353.6] 5.91 32.05 43.86 22.05 3172 CLSG-100012 [353.6] 5.91 32.05 43.86 22.05 3172 CLRG-100012

11.81 11.81

400 1.97 400 1.97

[433.9] 5.91 [433.9] 5.91

11.81 11.81

500 1.97 500 1.97

[566.3] 5.91 [566.3] 5.91

11.81 11.81

600 1.97 600 1.97

[662.9] 5.91 [662.9] 5.91

11.81 11.81

800 1.97 800 1.97
5.91 5.91
[911.6] 11.81 [911.6] 11.81

1000 1.97 1000 1.97
5.91 5.91
[1136] 11.81 [1136] 11.81

www.SuperiorToolRental.com 877-446-4352 53

HYDRAULIC CYLINDERS
HCG, HCR & HCL Series, High Tonage Cylinders

QUICK SELSCTION HCG-Series HCR-Series HCL-Series

Cyliner Stroke Max Model No. Collapsed Model No. Collapsed Model No. Collapsed
Capacity Cylinder Single-Acting Height Double-Acting Height Single-Acting Height
Capacity wIth Lock Nut
(Ton) HCG-502
at 10,150 psi HCG-504 (in.) (in.) (in.)
(in.) (Ton) HCG-506
HCG-508 7.20 7.20 6.46
50 1.97 62 HCG-5010 9.17 HCR-502 9.17 HCL-502 8.43
100 3.94 113 HCG-5012 11.14 HCR-504 11.14 HCL-504 10.39
150 5.91 168 HCG-1002 13.62 HCR-506 13.62 HCL-506 12.36
200 7.87 223 HCG-1004 15.59 HCR-508 15.59 HCL-508 14.33
250 9.84 286 HCG-1006 17.56 HCR-5010 17.56 HCL-5010 16.30
300 11.87 341 HCG-1008 7.95 HCR-5012 7.95 HCL-5012 7.36
1.97 HCG-10010 9.92 HCR-1002 9.92 HCL-1002 9.33
3.94 HCG-10012 11.89 HCR-1004 11.89 HCL-1004 11.30
5.91 HCG-1502 14.92 HCR-1006 14.92 HCL-1006 13.27
7.87 HCG-1504 16.89 HCR-1008 16.89 HCL-1008 15.24
9.84 HCG-1506 18.86 HCR-10010 18.86 HCL-10010 17.20
11.87 HCG-1508 8.66 HCR-10012 8.66 HCL-10012 8.23
1.97 HCG-15010 10.63 HCR-1502 10.63 HCL-1502 10.20
3.94 HCG-15012 12.60 HCR-1504 12.60 HCL-1504 12.17
5.91 HCG-2002 15.63 HCR-1506 15.63 HCL-1506 14.13
7.87 HCG-2004 17.60 HCR-1508 17.60 HCL-1508 16.10
9.84 HCG-2006 19.57 HCR-15010 19.57 HCL-15010 18.07
11.87 HCG-2008 9.09 HCR-15012 9.09 HCL-15012 9.37
1.97 HCG-20010 11.06 HCR-2002 11.06 HCL-2002 11.34
3.94 HCG-20012 13.03 HCR-2004 13.03 HCL-2004 13.31
5.91 HCG-2502 16.06 HCR-2006 16.06 HCL-2006 15.28
7.87 HCG-2504 18.03 HCR-2008 18.03 HCL-2008 17.24
9.84 HCG-2506 20.00 HCR-20010 20.00 HCL-20010 19.21
11.87 HCG-2508 9.49 HCR-20012 9.49 HCL-20012 9.80
1.97 HCG-25010 11.46 HCR-2502 11.46 HCL-2502 11.71
3.94 HCG-25012 13.43 HCR-2504 13.43 HCL-2504 13.74
5.91 HCG-3002 16.97 HCR-2506 16.97 HCL-2506 15.71
7.87 HCG-3004 18.94 HCR-2508 18.94 HCL-2508 17.68
9.84 HCG-3006 20.91 HCR-25010 20.91 HCL-25010 19.65
11.87 HCG-3008 11.65 HCR-25012 11.65 HCL-25012 10.94
1.97 HCG-30010 13.62 HCR-3002 13.62 HCL-3002 12.91
3.94 HCG-30012 15.59 HCR-3004 15.59 HCL-3004 14.88
5.91 17.56 HCR-3006 17.56 HCL-3006 16.85
7.87 19.53 HCR-3008 19.53 HCL-3008 18.82
9.84 21.50 HCR-30010 21.50 HCL-30010 20.79
11.87 HCR-30012 HCL-30012

54

HYDRAULIC CYLINDERS
HCG, HCR & HCL Series, High Tonage Cylinders

QUICK SELSCTION HCG-Series HCR-Series HCL-Series

Cyliner Stroke Max Model No. Collapsed Model No. Collapsed Model No. Collapsed
Capacity Cylinder Single-Acting Height Double-Acting Height Single-Acting Height
Capacity wIth Lock Nut
(Ton) HCG-4002
at 10,150 psi HCG-4004 (in.) (in.) (in.)
(in.) (Ton) HCG-4006
HCG-4008 12.64 12.64 12.48
400 1.97 450 HCG-40010 14.61 HCR-4002 14.61 HCL-4002 14.45
500 3.94 575 HCG-40012 16.57 HCR-4004 16.57 HCL-4004 16.42
600 5.91 637 HCG-5002 18.54 HCR-4006 18.54 HCL-4006 18.39
800 7.87 916 HCG-5004 20.51 HCR-4008 20.51 HCL-4008 20.35
1000 9.84 1196 HCG-5006 22.48 HCR-40010 22.48 HCL-40010 22.32
11.87 HCG-5008 13.54 HCR-40012 13.54 HCL-40012 14.06
1.97 HCG-50010 15.51 HCR-5002 15.51 HCL-5002 16.02
3.94 HCG-50012 17.48 HCR-5004 17.48 HCL-5004 17.99
5.91 HCG-6002 19.45 HCR-5006 19.45 HCL-5006 19.96
7.87 HCG-6004 21.42 HCR-5008 21.42 HCL-5008 21.93
9.84 HCG-6006 23.39 HCR-50010 23.39 HCL-50010 2390
11.87 HCG-6008 13.86 HCR-50012 13.86 HCL-50012 14.96
1.97 HCG-60010 15.83 HCR-6002 15.83 HCL-6002 16.93
3.94 HCG-60012 17.80 HCR-6004 17.80 HCL-6004 18.90
5.91 HCG-8002 19.76 HCR-6006 19.76 HCL-6006 20.87
7.87 HCG-8004 21.73 HCR-6008 21.73 HCL-6008 22.83
9.84 HCG-8006 23.70 HCR-60010 23.70 HCL-60010 24.80
11.87 HCG-8008 15.91 HCR-60012 15.91 HCL-60012 16.93
1.97 HCG-80010 17.87 HCR-8002 17.87 HCL-8002 18.90
3.94 HCG-80012 19.84 HCR-8004 19.84 HCL-8004 20.87
5.91 HCG-10002 21.81 HCR-8006 21.81 HCL-8006 22.83
7.87 HCG-10004 23.78 HCR-8008 23.78 HCL-8008 24.80
9.84 HCG-10006 25.75 HCR-80010 25.75 HCL-80010 26.77
11.87 HCG-10008 17.40 HCR-80012 17.40 HCL-80012 19.06
1.97 HCG-100010 19.37 HCR-10002 19.37 HCL-10002 21.02
3.94 HCG-100012 21.34 HCR-10004 21.34 HCL-10004 22.99
5.91 23.31 HCR-10006 23.31 HCL-10006 24.96
7.87 25.28 HCR-10008 25.28 HCL-10008 26.93
9.84 27.24 HCR-100010 27.24 HCL-100010 28.90
11.87 HCR-100012 HCL-100012

www.SuperiorToolRental.com 877-446-4352 55

HYDRAULIC CYLINDERS RCH-202 to RCH-1003 models

RCH-Series, Hollow Plunger Cylinders - Single Acting

RCH-120 to RCH-123 models

Cylinder Stroke Collap. Ext. Outside Thread Plunger Thread Center Hole Weight Model
Capacity Height Height Diam. No.
(ton max) (in.) O Length Diameter (lbs.)
A B D (in.) RCH-120
12 (13.8) 0.31 (in.) (in.) (in.) PY 3.2 RCH-121
1.63 6.2 RCH-1211
20 (23.6) 1.63 2.19 2.50 2.75 (in.) (in.) 6.2 RCH-123
30 (36.1) 3.00 4.75 6.38 2.75 9.8 RCH-202
60 (63.6) 2.00 4.75 6.38 2.75 3/4-16 un .63 .77 17 RCH-206
100 (103.1) 6.10 7.25 10.25 2.75 - - .77 31 RCH-302
2.50 6.38 8.38 3.88 .63 .77 24 RCH-306
6.13 12.05 18.11 3.88 3/4-16 un - .77 48 RCH-603
3.00 7.03 9.53 4.50 - .75 1.06 62 RCH-606
6.00 13.00 19.13 4.50 .75 1.06 78 RCH-1003
3.00 9.75 12.75 6.25 1-9/16-16 un .88 1.31 132
12.75 18.75 6.25 1-9/16-16 un .88 1.31
10.00 13.00 8.38 1-13/16-16 un .75 2.12
1-13/16-16 un .75 2.12
2-3/4-16 un 1.00 3.11
2-3/4-16 un

4-16 un

RRH-Series, Hollow Plunger Cylinders - Double Acting

Cylinder Stroke Collap. Ext. Outside Thread Plunger Thread Center Hole Weight Model
Capacity Height Height Diam. Length Diameter No.
O P Y (lbs.)
(ton) (in.) A B D (in.) (in.) (in.) RRH-307
30 (in.) (in.) (in.) 48 RRH-3010
60 7.00 1-13/16-16 .88 1.31 60 RRH-603
10.13 13.00 20.00 4.50 1-13/16-16 .88 1.31 62 RRH-606
100 3.50 17.00 27.13 4.50 .75 2.13 78 RRH-6010
150 6.50 9.75 13.25 6.25 2-3/4-16 .75 2.13 101 RRH-1001
10.12 12.75 19.25 6.25 2-3/4-16 .75 2.13 85 RRH-1003
1.50 17.25 27.38 6.25 2-3/4-16 1.00 3.13 135 RRH-1006
3.00 6.50 8.00 8.38 1.00 3.13 175 RRH-10010
6.00 10.00 13.00 8.38 4-16 1.00 3.13 235 RRH-1508
10.13 13.50 19.50 8.38 4-16 1.00 3.13 245
8.00 18.13 28.25 8.38 4-16 1.00 3.13
13.75 21.75 9.75 4-16
4-1/4"-12

RACH-Series, Hollow Aluminum Cylinders - Single Acting

Cylinder Stroke Collap. Ext. Outside Center Weight Model
Capacity Height Height Diam. Hole Diam. No.
A
(ton max) B DY
(in.) (in.) (in.) (in.) (in.) (lbs.)

20 (25.3) 1.97 7.41 9.37 3.94 1.06 11.5 RACH-202
30 (39.6) 5.91 12.41 18.32 3.94 1.06 15.7 RACH-206
60 (65.6) 1.97 8.20 10.17 5.12 1.34 17.6 RACH-302
100 (127.5) 5.91 13.12 19.02 5.12 1.34 24.7 RACH-306
3.94 12.41 16.34 7.09 2.13 43.0 RACH-604
5.91 14.97 20.87 7.09 2.13 50.3 RACH-606
5.91 15.39 21.31 9.84 3.11 101.9 RACH-1006

56

HYDRAULICS Vertical Lifting Wedge
BRP-Series, Pull Cylinders

Cylinder Stroke Collap. Ext. Outside Link Link Link Link Weight Model No.

Capacity Height Height Diam. Height Opening Thickness Width

(ton) A B D J L M N

[max] (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (lbs.)

10 6 23.11 29.06 3.35 4.72 2.44 1.19 1.38 35 BRP-106C
22.24 28.19 3.35 2.64 4.53 0.88 1.19 24 BRP-106L
[11.6] 6 Max. Model Min. Max. Lift Max. Max. Lifting Height Oil Weight
42.74 48.82 5.39 4.49 5.71 1.38 1.57 106 BRP-306 Lifting No. Clearance Per Lifting Using Stepped Capacity
30 6 Force Gap Stage Height Block
[36.1] (ton) (in.) (in.) (in.) (in.) (in3) (lbs)

60 6 28.34 34.32 5.51 5.13 5.90 1.5 1.97 118 BRP-606 16 LW16 .39 .83 2.02 2.72 4.75 15.4
[58.8]

35 Ton Hydraulic Punch

STANDARD PUNCH AND DIE SETS SELECTION CHART Steel Qualities (see Table):

Imperial* Maximum Allowable Material Thickness Standard 1. Mild A-7
Hole Hole Bolt To Be Punched Punch & 2. Boiler Plate
Shape Size Size Die Set 3. Structural A-36
(in) 4. Struct Corten (ASTM A242
(in) (in) 5. Cold Rolled C-1018
6. Hot Rolled C-1050
(in) (in) 1 2 3 4 5 6 7 8 9 10 11 Model No. 7. Hot Rolled C-1095
8. Hot Rolled C-1095 Annealed
.31 1/4 .31 .31 .25 .25 .25 .25 .13 .19 .25 .25 .25 SPD-313 9. Stainless Annealed
.38 5/16 .38 .38 .31 .31 .31 .31 .19 .25 .31 .31 .31 SPD-375 10. Stainless 304 Hot Rolled
.44 3/8 .44 .44 .38 .38 .38 .31 .19 .31 .31 .31 .31 SPD-438 11. Stainless 316 Cold Rolled
.53 7/16 .50 .50 .44 .44 .44 .38 .25 .31 .38 .38 .38 SPD-531
.56 1/2 .50 .50 .50 .44 .50 .44 .25 .38 .44 .44 .44 SPD-563
.69 5/8 .50 .50 .50 .44 .50 .40 .25 .31 .40 .40 .40 SPD-688
.78 - .50 .50 .50 .44 .50 .38 .25 .31 .38 .39 .38 SPD-781
.81 3/4 .50 .50 .50 .44 .50 .31 .19 .31 .31 .31 .31 SPD-813

* Material thickness should not exceed hole diameter
35 ton hydraulic steel punch for holes up to 1/2" thick mild steel
holes, matched with hydraulic electric pump. 35 lbs.

50 Ton Hydraulic Punch

STANDARD PUNCH AND DIE SETS SELECTION CHART Steel Qualities (see Table):

Imperial* Maximum Allowable Material Thickness Standard 1. Mild A-7
Hole Hole Bolt To Be Punched Punch & 2. Boiler Plate
Shape Size Size Die Set 3. Structural A-36
(in) 4. Struct Corten (ASTM A242
(in) (in) 5. Cold Rolled C-1018
6. Hot Rolled C-1050
(in) (in) 1 2 3 4 5 6 7 8 9 10 11 Model No. 7. Hot Rolled C-1095
8. Hot Rolled C-1095 Annealed
.53 1/2 .53 .53 .53 .53 .53 .49 .32 .40 .49 .49 .49 SP-150 9. Stainless Annealed
.66 5/8 .56 .56 .56 .50 .56 .51 .32 .40 .51 .51 .51 SP-170 10. Stainless 304 Hot Rolled
.78 3/4 .56 .56 .56 .50 .56 .49 .32 .40 .49 .50 .49 SP-190 11. Stainless 316 Cold Rolled
.91 7/8 .56 .56 .56 .50 .56 .35 .22 .35 .35 .35 .35 SP-21
1.03 1 .56 .56 .56 .44 .56 .31 .19 .31 .31 .31 .31 SP-123

* Material thickness should not exceed hole diameter
• Available as a complete set including electric pump & hoses
• Double-acting cylinder design for fast cycle times
• Punch and die changeover tools included
• Lifting handle for easy carrying
• Adjustable power stripper prevents movement of the

metal during stripping
• CR-400 female couplers included

www.SuperiorToolRental.com 877-446-4352 57

HYDRAULICS
58

Air Hoists

®

J.D. Neuhaus Profi air hoists are king in the rental business. They are the
most durable, reliable and maintenance-free air hoists on the market today.
Our fleet ranges from 1/4 ton to 60 ton IN STOCK with a variety of load chain lengths. The heavy-duty
cast construction provides the protection required on tough job sites. Call with your NEXT requirement
and we will be happy to supply you with the proper tonnage and length. All Profi hoists are rented with a
short whip hose and in-line oiler/filter to ensure the hoist receives the proper lubrication while in the field.

Chain Tumbler is a must for any high quality hoist
rental facility. All of our chain passes through the
Superior hoist chain tumbler after each rental to relieve
any dirt and grime.

www.SuperiorToolRental.com 877-446-4352 59

AIR HOISTS

1/4 - 2 Ton Air Hoists

Type Technical Data 1/4 - 2 Ton EVERY UNIT COMES STANDARD

1/4 1 1 WITH AIR PENDANT CONTROL
MINI 2

Air Pressure PSI 85 85 85 85 Includes
Bar 6 6 6 6
Oiler/
Capacity mt 1/4 1 1 2 Filter

Capacity lbs. 550 2,200 2,200 4,400 Regulator
Available
Number of chain strands 1 1 12
Upon
Lifting speed without load ft/min. 137.8 32.8 36.1 18 Request

Lifting speed at full load ft/min. 65.6 16.4 18 8.9 2 Ton

Lowering speed at full load ft/min. 124.7 32.8 36.1 18

Lowering speed without load ft/min. - 19.7 - -

Max air consumption cfm 53 56.5 53 53

Air connection G1/2 G1/2 G1/2 G1/2

Hose dimension (ø inside) inch. 1/2 1/2 1/2 1/2

Weight at standard 10 ft. lift lbs. 59.5 51 61.7 75

Chain dimension mm. 7 x 21 7 x 21 7 x 21 7 x 21

Weight of 3.28 ft. (1m) chain lbs. 2.2 2.2 2.2 2.2

Sound level Lifting 74 77 76 76
at full load1 dB(A) Lowering 78 83 78 78

1 Measured at 1m distance acc. to DIN 45635 part 20 G British Straight Thread 1 Ton Mini 1 Ton

Dimensions 1/4 - 2 Ton

Type 1/4 1 2 Type 1
MINI

A min. headroom inch. 17.7 17.7 19.6 A inch. 18.0

B inch. 11.3 11.3 13.2 B inch. 12.4

C inch. 5.7 5.7 5.7 C inch. 19.9

D inch. 11.7 11.7 13.7 D inch. 4.8

E1 inch. 1.1 1.1 1.1 E inch. 11.5

E2 inch. 1.1 1.1 1.1 F inch. 5.8

F up to hook center inch. 5.4 5.4 5.4 G inch. 5.7

G maximum width inch. 6.9 6.9 7.2 H inch. 9.2

J inch. 7.6

K inch. 4.7

L inch. 1.6

M inch. 1.1

DOUBLE
CLAMPED
CABLE
CONTROL

60

AIR HOISTS

2 and 3 Ton Air Hoists

Technical Data 2 and 3 Ton Includes Regulator
Available
Type 2 3 Oiler/
Single Filter Upon
85 Request
6
Air Pressure PSI 85 3mt
Bar 6 6,600
2
Capacity t/mt 2t 16.4
9.8
Capacity lbs. 4,000 18.0
127
Number of chain strands 1 G 3/4
3/4
Lifting speed without load ft/min. 32.8 146
9 x 27
Lifting speed at full load ft/min. 19.7 1.2
77
Lowering speed at full load ft/min. 39.4 80

Max air consumption cfm 127

Air connection G 3/4

Hose dimension (ø inside) inch. 3/4

Weight at standard 10 ft. lift lbs. 123

Chain dimension mm. 9 x 27

Weight of 3.28 ft. (1m) chain lbs. 1.2

Sound level at full Lifting 77
at full load1 dB(A) Lowering 80

1 Measured at 1 m distance acc. to KIN 45635 part 20

G British Straight Thread

Dimensions 2 and 3 Ton

Type 2 3
Single
21.4
A min. headroom1 inch. 18.9 14.0 2 Ton S.S. 3 Ton
7.9
B inch. 11.5 16.2
1.1
C inch. 7.9 1.1
5.5
D inch. 16.2 8.5

E1 inch. 1.1

E2 inch. 1.0

F up to hook center inch. 6.7

G maximum width inch. 8.5

• With overload protection
1 Chain containers increase the headroom

DOUBLE
CLAMPED
CABLE
CONTROL

www.SuperiorToolRental.com 877-446-4352 61

AIR HOISTS
3 - 20 Ton Air Hoists

3 Ton S.S. 4 Ton 6 Ton 8 Ton 6 Ton S.S. 10 Ton 12 Ton

Regulator Includes
Available
Oiler/
Upon Filter
Request

Dimensions 3 – 20 Ton

Type 3 Single 6 6 10 16 20
48 Single 12
35.4 40.6
A min. headroom1 inch. 23.3 26.5 27 32 23.5 26.4
15 15
B inch. 14.7 17.9 16.6 21.6 27.2 27.2
2.1 3
C inch. 9.2 9.2 12.1 12.1 2.1 3
7.8 7.1
D inch. 19 19 22.6 22.6 12.1 12.4

E1 inch. 1.6 1.6 1.7 1.7

E2 inch. 1.2 1.6 1.5 1.7

F up to hook center inch. 7.4 6.1 5 7.8

G maximum width inch. 9.2 9.2 10.75 12

1 Chain containers increase the headroom

DOUBLE
CLAMPED
CABLE
CONTROL

62

AIR HOISTS
16 and 20 Ton Air Hoists

16 Ton Air Hoist 20 Ton Air Hoist

Technical Data 3 – 20 Ton

Type 3 Single 6 6 10 16 20
4 8 Single 12

Air Pressure PSI 85 85 85 85 85 85
Capacity Bar 6 666 66
mt 3.2 6.3 6 10 16 20

Capacity lbs. 3T-7,040 6T-13,860 13,200 10T-22,000 35,200 44,000
4T-8,800 8T-17,600 12T-26,400

Number of chain strands ft/min. 1 2 1 2 3 4 DOUBLE
Lifting speed without load ft/min. 32.8 16.4 21 10.5 6.6 4.6 CLAMPED
Lifting speed at full load ft/min. 16.4 8.2 10.4 5.2 3.3 2.3 CABLE
Lowering speed at full load 35.4 17.7 22.4 11.2 6.9 5.3 CONTROL
Max air consumption cfm 195 195 195 195 195 195
Air connection G 3/4 G 3/4 G 3/4 G 3/4 G 3/4 G 3/4
Hose dimension (ø inside) inch. 3/4 3/4 3/4 3/4 3/4 3/4
Weight at standard 10 ft. lift lbs. 189 242.5 304.9 343.9 529.1 627
Chain dimension mm. 13 x 36 13 x 36 16 x 45 16 x 45 16 x 45 16 x 45
Weight of 3.28 ft. (1m) chain lbs./ft 2.6 2.6 3.9 3.9 3.9 3.9
Sound Level Lifting 78 78 78 78 78 78
at full load1 dB(A) Lowering
80 80 80 80 80 80

• With overload protection 1 Measured at 1 m distance acc. to KIN 45635 part 20 G British Straight Thread

www.SuperiorToolRental.com 877-446-4352 63

AIR HOISTS
25 - 60 Ton Air Hoists

25 Ton Air Hoist 50 Ton Air Hoist

Technical Data 25 – 60 Ton Dimensions 25 - 60 Ton

Type 25 - 30 37.5 - 40 50 - 60 Type 25 - 30 37.5 - 40 50 - 60

Air Pressure PSI 85 85 85 A min. headroom1 inch. 49.6 57.9 58.5
Capacity Bar 6 6 6 36.8 37.4
mt 25/30 37.5/40 50/60 B inch. 32.6 21.3 21.3
25T-55,000 37.5T-82,500 50T-110,000 42.5 42.5
30T-66,000 40T-88,000 60T-132,000 C inch. 17.7 3.9 3.9
2 3 4 3.9 3.9
Capacity lbs. D inch. 35.4 11.2 9.8
7.9 5.6 4.3 16.9 16.9
Number of chain strands E1 inch. 3.0
4.1/3.3 2.5/2.3 1.8/1.5
E2 inch. 3.0
9.2 6.6 5.3
Lifting speed ft/min. F inch. 10.6
without load 230 230 230
G 1-1/2 G 1-1/2 G 1-1/2 G inch. 17.5
Lifting speed
at full load ft/min. 1.38 1.38 1.38 1 Chain containers increase the headroom

Lowering speed ft/min. 1,213 1,874 2,072
at full load 23.5 x 66 23.5 x 66 23.5 x 66

Max air consumption cfm 8.2 8.2 8.2
78 78 78
Air connection 82 82 82

Hose dimension inch.
(ø inside)

Weight at lbs.
standard 10 ft. lift

Chain dimension mm.

Weight of chain lbs./ft

Sound level at Lifting
full load1 dB(A) Lowering

• With overload protection 60 Gallon Oiler, Regulator
Manifold Tank and Filter
1 Measured at 1 m distance acc. Combination

to KIN 45635 part 20

G British Straight Thread

DOUBLE
CLAMPED
CABLE
CONTROL

64

AIR HOISTS Variable Sizes and Lengths of Chain

Hoist with Air Pendant

Hoist with Chain Air Trolleys
Container

Protective Wrap for Air Pendant Control

Ready for Shipment

Right Angle Fitting

AVAILABLE ON OUR
1/4 TON THRU 20 TON UNITS

Don’t see what you’re looking for, just call us. Maybe it wasn’t featured or it was just recently added.
www.SuperiorToolRental.com 877-446-4352 65

CHAIN CONTAINERS 1 & 2 Ton 1.9 & 3 Ton Specifications Redundant
Support
0.25 - 2 Ton System
Required
Hoist CC CC Max Lift
–
Capacity Model No. Material Capacity –
–
3 & 6 Ton 10 Ton 0.25 - 14307 Polyurethane 10 ft –
1 Ton 14308 Polyurethane 20 ft –
16 & 20 TON 25 & 30 TON 14309 Polyurethane 40 ft Yes
2 Ton 14300 40 ft Yes
Double 14301 Steel 66 ft Yes
14302 Steel 100 ft –
2 Ton 14303 Steel 165 ft –
S.S. 14304 Steel 216 ft –
14305 Steel 43 ft –
3 Ton 14306 Fabric 76 ft –
S.S. 14308 Fabric 10 ft –
14309 Polyurethane 20 ft Yes
3 Ton 14300 Polyurethane 20 ft Yes
Double 14301 Steel 33 ft Yes
14302 Steel 50 ft –
6 Ton 14303 Steel 82 ft –
S.S. 14304 Steel 108 ft –
14305 Steel 22 ft –
6 Ton 14306 Fabric 38 ft –
Double 16644 Fabric 15 ft Yes
16650 Fabric 26 ft Yes
10 & 12 16651 Steel 43 ft Yes
Ton 16652 Steel 62 ft –
16653 Steel 98 ft –
16 Ton 16654 Steel 131 ft –
13738 Steel 13 ft –
20 Ton 13739 Steel 20 ft Yes
25 & 30 13740 Steel 33 ft Yes
13741 Steel 52 ft Yes
Ton 13742 Steel 75 ft Yes
13743 Steel 128 ft Yes
13744 Steel 181 ft –
13745 Steel 255 ft –
13746 Steel 376 ft Yes
16650 Steel 13 ft Yes
16651 Steel 21 ft Yes
16652 Steel 31 ft –
16653 Steel 46 ft –
16654 Steel 65 ft –
13747 Steel 20 ft Yes
13748 Steel 32 ft Yes
13749 Steel 50 ft Yes
13750 Steel 82 ft Yes
13751 Steel 116 ft Yes
13752 Steel 168 ft –
13753 Steel 242 ft –
13762 Steel 336 ft –
13739 Steel 10 ft Yes
13740 Steel 16 ft Yes
13741 Steel 26 ft Yes
13742 Steel 37 ft Yes
13743 Steel 64 ft Yes
13744 Steel 90 ft –
13745 Steel 125 ft –
13746 Steel 188 ft –
13747 Steel 10 ft Yes
13748 Steel 16 ft Yes
13749 Steel 25 ft Yes
13750 Steel 41 ft Yes
13751 Steel 58 ft Yes
13752 Steel 84 ft –
13753 Steel 121 ft –
13762 Steel 168 ft –
13754 Steel 6 ft Yes
13755 Steel 10 ft Yes
13756 Steel 16 ft Yes
13757 Steel 26 ft Yes
13758 Steel 39 ft Yes
13759 Steel 56 ft Yes
13760 Steel 81 ft Yes
14524 Steel 12 ft Yes
14525 Steel 21 ft Yes
14526 Steel 29 ft Yes
14527 Steel 42 ft Yes
TBD Steel 20 ft Yes
TBD Steel 30 ft
14945 Steel 43 ft
TBD Steel 61 ft
Steel

66

www.SuperiorToolRental.com 877-446-4352 67

68

Motor Pneumatic Trolleys
Beam Trolleys & Clamps

www.SuperiorToolRental.com 877-446-4352 69

MOTOR PNEUMATIC TROLLEYS Dimensions (in)

3 Ton Hoist (Ton) 1/4 1/2 1 2 S.S. 2 3 3 S.S. 4 6 8 6 S.S. 10 12 16 20 25
Trolley (Ton)
Shown as suspended A 2 3 6 6 10 6 10 - 16 20 25
Bmax.
6 Ton C 9.8 11.5 19.7 19.3 19.7 19.3 23.6 N/A
d
Shown as suspended D 5.1 4.4 5.6 5.2 N/A
E
10 / 16 Ton F b + 1.4 b + 2.4 b + 2.8 b+2.7 N/A
G
H 2.8 3.3 6.5 7.3 N/A
J* (mounted)
J* (suspended) 7.2 7.3 7.2 7.5 8.1 12.9 8.1 12.9 N/A
K
L 5.4 6.7 5.4 5.5 7.4 6.1 5 7.8 7.1 N/A
M
N 1.5 1.7 1.8 3.0 1.8 3.1 3.5 4.3 5.3 N/A

5.7 7.9 5.7 7.9 9.2 12.1 1.5 N/A

6 3.3 6 3.3 9.8 10.5 12.2 N/A

- - - - - 24.1 25 24.1 30 - 34.2 37 39 44.3 N/A

22.2 23.7 24.1 - 31.4 - 36.2 41.6 44.2 46.3 46.1 58.1 N/A

3.7 4.2 7.4 8.6 N/A

1.1 1.0 1.1 1.2 1.6 1.7 2.1 2.9 N/A

1.7 1.6 1.7 2 2.4 2.6 3.2 3.4 N/A

4.6 5.4 9.3 9.43 10.8 N/A

* Chain containers increase the hoist headroom

Shown as suspended

70

MOTOR TROLLEY ACCESSORIES

Accessory Part Numbers

Hoist Load Eyes:

Ton Part No. (for use in 3 Ton Trolley)
1/4 & 1/2 11179 & 11180 (for use in 3 Ton Trolley)
11179 & 11180 (for use in 3 Ton Trolley)
1&2 16569 & 16664
2 S.S. & 3 D.S. –
13457 –
3 13458 –
6 13459 –
10 13460 –
16 13589 –
20 J14939 & 02269
25

Trolley Load Suspension

2 Ton Trolley Range Part No.
13505
PIN I 1.96 - 7.87 in. 13672

PIN II 7.87 - 11.02 in. 70294
70295
3 Ton Trolley 70296
70297
PIN I 2.16 - 4.64 in.
55675
PIN II 4.68 - 6.93 in.
70431
PIN III 6.96 - 9.68 in. 70432
70433
PIN IV 9.72 - 12.20 in.
55676
Suspension Link Kit 3t
(joins a hook mount hoist to trolley) 70406
70407
6 Ton Trolley 70408
70409
PIN I 4.92 - 7.40 in.
55677
PIN II 7.48 - 9.68 in.
73271
PIN III 9.72 - 12.20 in. 73680
74410
Suspension Link Kit 6t
(joins a hook mount hoist to trolley) 70406 2 req.
70407 2 req.
16 Ton Trolley 70408 2 req.

PIN I 4.92 - 7.40 in.

PIN II 7.48 - 9.68 in.

PIN III 9.72 - 12.20 in.

PIN IV 12.87 - 16.61 in.

Suspension Link Kit 16t
(joins a hook mount hoist to trolley)

20 Ton Trolley

PIN I 4.92 - 7.40 in.

PIN II 7.48 - 9.68 in.

PIN III 9.72 - 12.20 in.

25 Ton Trolley

PIN I 4.92 - 7.40 in.

PIN II 7.48 - 9.68 in.

PIN III 9.72 - 12.20 in.

www.SuperiorToolRental.com 877-446-4352 71

BEAM TROLLEYS FOR RENT ONLY

1 Ton 1T, 3T, 6T & 10T

3 Ton Model No. T101 V2 Dimensions (in) T106 V2 T101 V2
6 Ton Capacity** 1T T103 V2 6T 10T
10 Ton 3 3T 4 4
A Min 8.5 4 10 11
A Max 13.1 8 17.6 21
8.3 13.3 12.6 13
B 4.6 10 7.5 8.2
C 3.9 6 6.3 12.5
D 1.2 5.1 1.2 2.1
E 19.8 1 180.4
F 44 101.2
Weight (lbs)

** Capacity expressed in metric tons

72

BEAM TROLLEYS

FOR PURCHASE OR RENT
Autolock Runway Beam Trolleys with Anti-Drop Plates

DIMENSIONS (in.)

To Accom. To Inside
Width Beam Accom.
Model WLL at Adjustment Flange Flange Shackle Headroom Average
No. 0° Thickness Thickness Crown at Weight
min-max max. max. to Spacer (lbs.)
Vertical min-max

(lbs.)

A B C D min max

A1 6720 3 - 8 5-1/8 1 5-1/4 -9 46
3/4 1-1/4 5-5/8 - 17 73
A2 13440 4 - 12 3/4 1-1/4 5-1/2 - 19 105

A3 22400 4 - 12

Adjustable Runway Beam Trolleys with Anti-Drop Plates

DIMENSIONS (in.)

Model WLL at 0° Width To Accom. Inside Shackle Headroom at Average Weight
No. Vertical Adjustment Beam Crown min-max (lbs.)

(lbs.) min-max Thickness to Spacer
max.
A C min max
B
BA1 2240 2-1/2 - 8 4 9-3/4 8 14
BA2 3360 3-8 1
BA3 4480 3-8 1 4 9-3/4 8 15
1
4 9-3/4 8 15

Adjustable Runway Beam Trolleys

DIMENSIONS (in.)

Model WLL at 0° Width To Accom. Inside Shackle Headroom at Average Weight
No. Vertical Adjustment Beam Flange Width min-max (lbs.)

(lbs.) min-max Thickness
max.
B1 6720 A C min max 52
B2 13440 B 110
B3 22400 3-8 4-3/4 11 9-1/2 164
4-12 1-1/8 3-7/8 14 12
4-12 1-1/4 5-1/8 15 12
1-1/4

Geared Runway Beam Trolleys with Anti-Drop Plates

DIMENSIONS (in.)

Model WLL at 0° Width To Accom. Inside Shackle Headroom at Average
No. Vertical Adjustment Beam Flange Crown to min-max Weight
Spacer (lbs.)
(lbs.) min-max Thickness
max. 68
A C min max 127
B 183
GBT1 6720 3- 8 4 11 9-1/2 354
GBT2 13440 4 - 12 1-1/8 4 14 12 440
GBT3 22400 6 - 12 1-1/4 5-1/8 15-3/4 13-3/4
GBT4 33600 8 - 18 1-1/2 8 23 19-1/2
GBT5 44800 8 - 18 8-3/4 --
3
3

www.SuperiorToolRental.com 877-446-4352 73

BEAM CLAMPS

FOR PURCHASE OR RENT
Universal Superclamp

Adjustable Double Ended Monorail * WLL at 0° Adjustment To Accommodate Average
Construction Clamps Model No. Vertical Min-Max (in.) Beam Flange Weight
(lbs.)
(lbs.) A Thickness Max. (in.)
6-8 B 30
USC3A 6720 6 - 12 1 52
USC4 8960 6 - 12 1 63
USC5 11200 6 - 12 1 63
USC5A 11200 6 - 12 74
USC5D 22400 9 - 16 1-1/2 95
USC5D400 22400 1
1

* Approved for Personnel tie-off use

Permanently Fixed Adjustable Girder Clamps

*WLL at Jaw Grip Jaw Max. Height Headroom Avg.
Model 0° Vertical Adjustment Aperture Adjustment at min-max Weight
No. (lbs.) (in.) (lbs.)
(in.) (in.) (in.)
min max
AB

S7 6720 3 - 7-1/2 7/8 - 8-1/2 7-1/2 20

S7A 6720 3 - 7-1/2 7/8 1-1/4 32 8-1/2 7-1/2 23

S8 8960 6 - 10 7/8 - 10-1/2 9-3/4 41

S8A 8960 6 - 10 7/8 1-1/4 32 10-1/2 9-3/4 44

* Approved for Personnel tie-off use

Swivel Jaw Adjustable Girder Clamps

Model WLL at 0° Jaw Grip Jaw Inside Shackle Headroom Avg.
No. Vertical Adjustment Aperture Crown to Spacer at min-max Weight
(lbs.)
PFC1 (lbs.) Min-Max (in.) (in.) (in.) (in.)
PFC2 A B C min max 4
PFC3 7/8 1-1/2 5-1/2 4-1/2 6
2240 3 - 7-1/2 7/8 1-1/2 5-1/2 4-1/2 7
4480 3 - 7-1/2 7/8 1-1/2 --
6720 3 - 7-1/2

Fixed Jaw Adjustable Girder Clamps

WLL at 0° Jaw Grip Jaw Inside Shackle Headroom Avg.
Model Vertical Adjustment Aperture Crown to Spacer at min-max Weight
No. (lbs.) Min-Max (in.) (in.) (in.) (lbs.)
(in.)

A B C min max

S5 6720 3-1/2 - 12 1 3-3/4 11-3/4 8-3/4 22

S5A 6720 3-1/2 - 12 1 4-1/2 12-1/4 9-1/4 31

S6 11200 3-1/2 - 12 1 4-1/2 12-1/4 9-1/4 31

S6A 11200 3-1/2 - 12 1 4-1/2 12-1/2 9-1/2 34

S11 22400 3-1/2 - 12 1 4-1/2 13-1/2 11-1/2 47

Fixed Adjustable Girder Dog * WLL at 0° Jaw Grip Jaw Inside Shackle Headroom Avg.
Aperture Crown to Spacer at min-max Weight
Model Vertical Adjustment (lbs.)
No. (lbs.) (in.) (in.) (in.) (in.)
9
AB C min max 11
18
S1 4480 3 - 7-1/2 7/8 3-3/4 8-1/4 6-1/4 24
22
S2 6720 3 - 7-1/2 7/8 3-3/4 8-1/2 7-1/2 33
41
S2A 6720 3 - 7-1/2 7/8 3-3/4 9 8-1/2 60
109
S3 8960 6 - 10 7/8 3-7/8 10-1/2 9-3/4 129

S3X 11200 3 - 7-1/2 7/8 4-1/8 9-1/2 8-3/4

S3A 11200 6 - 12 1-5/8 4-1/8 11-1/2 10-1/2

S4S 13440 8 - 18 1-5/8 4-1/8 16 3-3/4

S4A 22400 8 - 18 1-5/8 4-1/2 16 3-3/4

Inside S12 33601 8 - 18 2 5-7/8 19-1/2 16-3/4

Model WLL at 0° Jaw Grip Jaw Shakle Inside Headroom Avg. S14 33601 16 - 24 2-1/2 5-7/8 22-1/4 19
No. Vertical Adjustment Aperture Crown to Shakle at min-max Weight
(lbs.) Spacer Width (lbs.) * Approved for Personnel tie-off use
(in.) (in.) (in.)
(in.) (in.)

A BC D min max

S15 44800 8 - 18 2 8-1/8 4-9/16 20-1/2 18-1/2 144
S16 44800 16 - 24 2-1/2 8-1/8 4-9/16 22-1/2 19-1/4 170

S17 56000 8 - 18 2 8-1/8 5-1/8 20-1/4 17 166

S18 56000 16 - 24 2-1/2 8-1/8 5-1/8 22-3/4 19-3/4 198

S19 67200 8 - 18 2-1/2 8-1/8 5-1/8 20-1/4 17 203

S20 67200 16 - 24 3 8-1/8 5-1/8 22-3/4 20-1/4 236

74

CLAMPS

FOR PURCHASE OR RENT

Pipe Lifting Clamps DIMENSIONS (in.)

WLL Adjustable to Fit Inside Shackle Inside Average
Model at 0° Outside Diameter Crown to Spacer Shackle Width Weight
No. Vertical (in.) (lbs.)
(in.) (in.)
(lbs.) A B C 15
3-7/8 2-7/8 28
P1 2240 2-1/2 - 4-1/2 3-7/8 2-7/8 36
3-7/8 2-7/8 58
P2 3360 4-7 4 3-3/4 69
4 3-3/4 79
P3 4480 5-9 4 3-3/4 110
4 3-3/4 140
P4 6720 7 - 11 4-3/4 4-5/8 169
4-3/4 4-5/8
P5 6720 8 - 13

P6 6720 9 - 15

P7 6720 10 - 17

P8 8960 12 - 19

P9 8960 16 - 24

Adjustable Angle Section Clamps

DIMENSIONS (in.)

Model WLL To Fit Angle Jaw Inside Shackle Inside Average
No. at 0° Sections Aperture Crown to Spacer Shackle Width Weight
Vertical (lbs.)
AC1 lbs. A B C D
AC2 1-1/2 - 4 9/16 4 2-3/4 10
AC3 1120 1-1/2 - 4 9/16 3-3/4 2-3/4 10
AC4 2240 7/8 2-7/8 3-1/2 24
3360 2-6 4 47
Model BC Locking Type Clamps 6720 4-8 1 4

Adjustabl Universal Rail Lifting Clamps

Dimensions (in.)

Model * WLL at 0° Jaw Grip Inside Shackle Average
No. Vertical Adjustment Crown to Spacer Weight
(lbs.) (lbs.)
R1 A B
R2 6720 STD AREA Rail 3-3/8 13
R1-59 11200 4-1/4 21
11200 & Crane Rail 33

Trolley Rail 4-1/4

Working Flange Flange Dimensions (in.) Weight
Load Limit at Width Thickness (lbs.)
C D E F G H
0°- 20° A B 9-1/2
Vertical Tons 3-7-1/2 1/4 - 5/8 11-7/8 11-3/4 3 1/2 5 5-3/4 13-1/2
3-7-1/2 1/4 - 5/8 11-7/8 12 3 5/8 5-3/16 6-3/4 22-1/2
1-1/2 6 - 10 1/2 - 7/8 3-1/4 3/4 6-5/16 6-3/4
3 1/2 - 1-1/4 17 14-7/8 4 1-1/2 7-1/8 53
5 6-12 21-1/4 19-1/8 4-1/2 1-3/4 8-3/8 9 120
10 8-18 7/8 - 2 26-1/2 5 12 450
15 18-40 2-3 32 40-1/2 2 15 15
25 61

(Screw-Adjusted Cam) Plate Clamps

Cam position Cam under load.
under no load. The heavier the
load, the greater
the bite.

Model Grip Range Working Load Weight Dimensions (in.)
No. (in.) Limit (Metric Tons) (lbs.)
A B C D E FH J O P
SAC-1 0 to 1" 1t 6.25 5-1/4 7-3/4 4 1-3/4 2-1/4 6-1/4 1-23/64
SAC-3 0 to 2" 3t 17 7-3/4 10-1/2 6-1/2 1-7/8 2-7/8 1/2 1-1/2 3-3/4 9-1/4 1-13/16
SAC-6 0 to 3" 6t 39 14-1/4 8-1/4 3-1/4 4-1/2
10 3-3/8 3/4 2-3/8 12 2-1/4

4-1/2 1-1/8 3

www.SuperiorToolRental.com 877-446-4352 75

BEAM CLAMPS & TROLLEYS FOR PURCHASE ONLY

CORSO Overhead Push Trolleys

Push Trolleys - Flange Adjustment with Crank Dimensions (in.) Mini.
curve
Model No. Size (ton) Flange Size (in.) Weight (lbs) Model No. A B C D E F G H I R FF radius
35.4
23309 1/2 Ton 2 - 8.66 18.7 23309 8.86 12.76 3.46 0.63 0.98 0.63 1.06 2.09 0.43 4.33 1.97 – 8.66 39.37
23319 1 Ton 2.28 - 8.66 23.2 23319 9.92 13.15 4.06 0.67 1.18 0.67 1.18 2.44 0.59 4.33 2.28 – 8.66 47.24
23329 2 Ton 39.7 23329 11.81 13.46 5 0.83 1.57 0.83 1.50 3.15 0.71 4.33 3 – 8.66 51.18
23379 3 Ton 3 - 8.66 70.5 23379 14.17 14.09 6.97 0.83 1.89 0.83 1.77 3.82 0.59 4.33 2.91 – 8.66 55.12
23389 5 Ton 2.91 - 8.66 106.9 23389 15.75 14.65 7.56 1.22 3.28 1.22 2.05 4.33 0.79 4.33 3.5 – 8.66 N/A
056279 10 Ton 3.5 - 8.66 220 056279 18.50 21.65 11.02 N/A N/A N/A N/A N/A N/A N/A N/A
4.9 - 12.6

CORSO Beam Clamps

Dimensions (in.)

Model No. Size (ton) Flange Size Weight (lbs.) Model No. A max. B min. B max. C D E F max. F min. GxH
10-5/8 5/32 8-17/64 6-7/8 4-7/8 1-3/16 x 1-3/4
CC07009 1 Ton 3 - 9.3 11 CC07009 10-5/8 7-3/32 15 3 15/64 8-17/64 7-1/8 5-1/8 1-3/16 x 1-5/8
CC07019 2 Ton 3-9 12 CC07019 14-11/64 5/16 10-7/8 9-7/8 6-7/8 1-3/4 x 2-5/8
CC07029 3 Ton 3.7 - 13.2 24 CC07029 13-15/16 7-11/64 15 3-5/16 25/64 1-3/4 x 1-3/8
CC07039 5 Ton 3.7 - 13 27 CC07039 12-19/32 15/32 9-3/4 8-21/32 5-1/2 2-3/8 x 3-1/2
CC07049 10 Ton 3.5 - 13.8 46 CC07049 9-1/4 19-19/64 4-17/32 10-7/8 11-13/16 9-7/8

9-61/64 19-19/64 5-7/16

10-3/64 18-57/64 6-19/64

VESTIL Trolleys

DIMDEiNmSeInOsNioSns(i(nin.).)

Model No. Fits Beam Capacity (tons) Weight (lbs) Model No. A (min - max) B C D E (min - max) F (min - max) G HI
Flange Width 1/2 15 QIT-1 3-3/8 - 6-3/4 10-1/4 8-1/2 6-3/4 3-3/8 - 6-3/4 3-1/4 - 5 2-3/8 3/8 2-3/4
QIT-1 1 20 QIT-2 4 - 7 12 10-5/8 5/8 2-3/4
QIT-2 3 to 5 2 25 QIT-4 3 - 7 12 10-1/2 7 4-7 3-1/8 - 4-5/8 3 5/8 3
QIT-4 3 to 5 3 45 QIT-6 3 - 9-1/4 14-9/16 12-3/8 6-3/4 4-9/16 - 8-9/16 3-9/16 - 5-9/16 3-1/4 1 4-1/4
QIT-6 3 to 7-1/2 4 70 QIT-8 4 - 11-3/4 20-3/8 17-1/4 5-3/4 - 10-11/16 3-11/16 - 6-3/16 7-5/8 1 5-1/4
QIT-8 3 to 7-1/2 5 75 QIT-10 4 - 11-3/4 20-3/8 17-1/4 11 2-11/16 - 5-3/16 4-1/4 1 5-1/4
QIT-10 4 to 11-3/4 6 80 QIT-12 4 - 11-3/4 20-3/8 17-1/4 13-5/8 10 - 15 2-11/16 - 5-3/16 4-1/4 1 5-1/4
QIT-12 4 to 11-3/4 13-5/8 10 - 15 2-11/16 - 5-3/16 4-1/4
4 to 11-3/4 13-5/8 10 - 15

VESTIL Beam Clamps Dimensions (in.)
76
Model Beam Flange Width Capacity (tons) Weight (lbs.)
No.
A 1 18
BC-2 2-1/2 - 8-1/2 2 20
BC-4 2-1/2 - 8-1/2 3 28
BC-6 4-1/2 - 8-1/2 4 40
BC-8 4-1/2 - 8-1/2

Tuggers-Air

www.SuperiorToolRental.com 877-446-4352 77

TUGGERS-AIR

Air Tugger Specifications

Capacity Drum Line Speed Cable Capacity Weight w/o Rope Air Inlet Thread Hose Size Avg. Air
at Capacity (lbs.) (in.) (in.) Consumption
1,100 lbs. Short 213 ft. of 1/4"
62 ft./min. 147 ft. of 5/16" 97 3/4 1 @ 90 psi
2,500 lbs. Short 71 cfm
150 ft./min. 737 ft. of 3/8" 490 1 1
2,500 lbs. Long 411 ft. of 1/2" 175 cfm
3,000 lbs. Long 150 ft./min. 253 ft. of 5/8" 562 1 1
4,400 lbs. Long 150 ft./min. 598 1-1/4 1 175 cfm
62 ft./min. 1,520 ft. of 3/8" 654 1
5,000 lbs. Long 852 ft. of 1/2" 1 191 cfm
115 ft./min. 524 ft. of 5/8" 890 1-1/2 191 cfm
62 ft./min. 1-1/4 1-1/2
55 ft./min. 1,445 ft. of 3/8" 1-1/4 1-1/2 420 cfm
36 ft./min. 813 ft. of 1/2" 1-1/4 1-1/2 318 cfm
952 ft. of 7/16" 1-1/4 600 cfm
27.9 ft./min. 768 ft. of 1/2" 1-1/2 min 318 cfm
2
851 ft. of 7/16" 600 cfm
715 ft. of 1/2"
457 ft. of 5/8"

6,600 lbs. Long 1,050 ft. of 5/8" 1,161

10,000 lbs. Long 820 ft. of 3/4" 1,550
11,000 lbs. Long 755 ft. of 7/8"

22,000 lbs. Long 820 ft. of 3/4" 1,923
755 ft. of 7/8" 5,071

1,460 ft. of 7/8"
1455 ft. of 1"

904 ft. of 1-1/8"
700 ft. of 1-1/4"

ALL TUGGERS ARE EQUIPPED WITH SAFETY GUARDS Tugger with Cable & 100 lb. Ball

Tuggers from 1,100 lbs. up to 22,000 lbs.

22,000 lbs.

20 lb. 50 lb. 113 lb.

1,100 lbs.

78

TUGGERS-AIR

1,100 lb. Short Drum Tugger with Manual Brake

AIR TUGGER SPECIFICATIONS (at Half Drum) Dimensions (in.)

Capacity Drum Line Speed Cable Weight Air Inlet Hose Avg. Air
at Capacity Capacity w/o Rope Thread Size Consumption

@ 90 psi

1,100 lbs. Short 62 ft./min. 213 ft. of 1/4 97 lbs. 3/4 1 71 cfm
147 ft. of 5/16

Dimensions (in.) refer to chart below

A D Air Inlet E Exhaust F
21.10 B C Pipe Tap Pipe Tap 9.6

4.49 12.68 0.75 0.75

2,500 lb. Short Drum Tuggger with Auto Brake

AIR TUGGER SPECIFICATIONS (at Half Drum) Dimensions (in.)

Capacity Drum Line Speed Cable Weight Air Inlet Hose Avg. Air
at Capacity Capacity w/o Rope Thread Size Consumption

@ 90 psi

737 ft. of 3/8
2,500 lbs. Short 150 ft./min. 411 ft. of 1/2 490 lbs. 1 1 175 cfm

253 ft. of 5/8

Dimensions (in.) refer to chart below

A D Air Inlet E Exhaust F
32-7/8 B C Pipe Tap Pipe Tap 18.25
7-1/8 22-5/16 1-1/4 1-1/2

2,500 lb. Long Drum Tugger with Auto Brake

AIR TUGGER SPECIFICATIONS (at Half Drum) Dimensions (in.)

Capacity Drum Line Speed Cable Weight Air Inlet Hose Avg. Air
at Capacity Capacity w/o Rope Thread Size Consumption

@ 90 psi

1,520 ft. of 3/8 1 175 cfm
2,500 lbs. Long 150 ft./min. 852 ft. of 1/2 562 lbs. 1

524 ft. of 5/8

Dimensions (in.) refer to chart below

D Air Inlet E Exhaust F
A B C Pipe Tap Pipe Tap 18.25
40-15/16 15-3/16 30-3/8 1-1/4
1-1/2

ALL TUGGERS ARE EQUIPPED WITH SAFETY GUARDS

Tugger Dimensions (in.)

Bottom of Tugger

www.SuperiorToolRental.com 877-446-4352 79

TUGGERS-AIR

3,000 lb. Long Drum Tugger with Manual Brake

AIR TUGGER SPECIFICATIONS (at Half Drum) Dimensions (in.)

Capacity Drum Line Speed Cable Weight Air Inlet Hose Avg. Air
at Capacity Capacity w/o Rope Thread Size Consumption

@ 90 psi

3,000 lbs. Long 150 ft./min. 1,445 ft. of 1/4 598 lbs. 1-1/4 1 191 cfm
813 ft. of 1/2

Dimensions (in.) refer to chart below

D Air Inlet E Exhaust F
A B C Pipe Tap Pipe Tap 18-1/4
40-15/16 15-3/16 30-3/8 1-1/4 1-1/2

4,400 lb. Long Drum with Auto Brake

AIR TUGGER SPECIFICATIONS (at Half Drum) Dimensions (in.)

Capacity Drum Line Speed Cable Weight Air Inlet Hose Avg. Air
at Capacity Capacity w/o Rope Thread Size Consumption

@ 90 psi

4,400 lbs. Long 62 ft./min. 952 ft. of 7/16 654 lbs. 1 1 191 cfm
768 ft. of 1/2

Dimensions (in.) refer to chart below

A D Air Inlet E Exhaust F
40.55 B C Pipe Tap Pipe Tap 23.35

14.02 28.03 1 1-1/2

5,000 lb. Short Drum Tugger with Auto Brake

AIR TUGGER SPECIFICATIONS (at Half Drum) Dimensions (in.)

Capacity Drum Line Speed Cable Weight Air Inlet Hose Avg. Air
at Capacity Capacity w/o Rope Thread Size Consumption

@ 90 psi

851 ft. of 7/16
5,999 lbs. Short 115 ft./min. 715 ft. of 1/2 890 lbs. 1-1/4 1-1/2 420 cfm

457 ft. of 5/8

Dimensions (in.) refer to chart below

A D Air Inlet E Exhaust F
B C Pipe Tap Pipe Tap

39 10 25.75 1-1/4 1-1/2 21.75

ALL TUGGERS ARE EQUIPPED WITH SAFETY GUARDS

Tugger Dimensions (in.)

Bottom of Tugger

80

TUGGERS-AIR

6,600 lb. Long Drum Tugger with Auto Brake

AIR TUGGER SPECIFICATIONS (at Half Drum) Dimensions (in.)

Capacity Drum Line Speed Cable Weight Air Inlet Hose Avg. Air
at Capacity Capacity w/o Rope Thread Size Consumption

@ 90 psi

6,600 lbs. Long 62 ft./min. 1,050 ft. of 5/8 1,61 lbs. 1-1/4 1-1/2 318 cfm

Dimensions (in.) refer to chart on previous page

A D Air Inlet E Exhaust F
50.43 B C Pipe Tap Pipe Tap 28.62

18.9 30.32 1-1/4 1-1/2

10,000 lb. Long Drum Tugger with Manual Brake

AIR TUGGER SPECIFICATIONS (at Half Drum) Dimensions (in.)

Capacity Drum Line Speed Cable Weight Air Inlet Hose Avg. Air
at Capacity Capacity w/o Rope Thread Size Consumption

@ 90 psi

10,000 lbs. Long 62 ft./min. 820 ft. of 3/4 1,550 lbs. 1-1/4 1-1/2 600 cfm
755 ft. of 7/8

Dimensions (in.) refer to chart on previous page

D Air Inlet E Exhaust
A B C Pipe Tap Pipe Tap F

58.5 24 31.04 1-1/4 1-1/2 25.98

11,000 lb. Long Drum Tugger with Auto Brake

AIR TUGGER SPECIFICATIONS (at Half Drum) Dimensions (in.)

Capacity Drum Line Speed Cable Weight Air Inlet Hose Avg. Air
at Capacity Capacity w/o Rope Thread Size Consumption

@ 90 psi

11,000 lbs. Long 36 ft./min. 820 ft. of 3/4 1,923 lbs. 1-1/4 1-1/2 318 cfm
755 ft. of 7/8

Dimensions (in.) refer to chart on previous page

A B D Air Inlet E Exhaust F
57.44 23.62 C Pipe Tap Pipe Tap 34.72
40.99 1-1/4
1-1/2

22,000 lb. Long Drum Tugger with Auto Brake

AIR TUGGER SPECIFICATIONS (at Half Drum) Dimensions (in.)

Capacity Drum Line Speed Cable Weight Air Inlet Hose Avg. Air
at Capacity Capacity w/o Rope Thread Size Consumption

@ 90 psi

1,460 ft. of 7/8
22,000 lbs. Long 27.9 ft./min. 1,455 ft. of 1 5,071 lbs. 1-1/4 1-1/2 600 cfm
904 ft. of 1-1/8 min
700 ft. of 1-1/4

Dimensions (in.) refer to chart on previous page

D Air Inlet E Exhaust
A B C Pipe Tap Pipe Tap F
74.92 10 19.69 1-1/4 1-1/2 min 41.34

ALL TUGGERS ARE EQUIPPED WITH SAFETY GUARDS 81

www.SuperiorToolRental.com 877-446-4352

ELECTRIC WINCHES 1,000-LB SINGLE-LINE or
2,000-LB DOUBLE-LINE LIFT
Electric Winch
FRONT VIEW
Model No. 100AB
FEATURES TOP VIEW
• Worm gear reduction for positive load holding
• 115 Volt brake motor 3,000-LB SINGLE-LINE or
• Dynamic braking for instant stopping 6,000-LB DOUBLE-LINE LIFT
• Compact, heavy-duty construction
• Low voltage 10' pendant control FRONT VIEW
• Cable tensioner for better cable tracking
TOP VIEW
SPECIFICATIONS SIDE VIEW
Power
• Universal 18,500 RPM reversible

1.25 HP brake motor (no-load speed)
• 15' power cord plugs into any

115 Volt AC grounded outlet
• 6 amp - No load
• 14 amp - Full load

Lifting Capacity
• 1,000 lbs – 1-2 layers of cable

(39' of 1/4" cable)
• 850 lbs – 3 layers of cable (65' of 1/4" cable)
• 600 lbs – full drum of cable (250' of 1/4" cable)

Drum Storage Shipping Weight
• 1/8" - 1,000' 76 lbs
• 3/16" - 450'
• 1/4" - 250'
• 5/16" - 150'

Electric Winch

Model No. AC36B
FEATURES
• Worm gear reduction for positive load holding
• 115 Volt brake motor
• Dynamic braking for instant stopping
• Compact, heavy-duty construction
• Low voltage 10' pendant control
• Cable tensioner for better cable tracking

SPECIFICATIONS SIDE VIEW
Power
• Universal 18,500 RPM reversible

1.25 HP brake motor
(no-load speed)
• 15' power cord plugs into any
115 Volt AC grounded outlet
• 6 amp - No load
• 14 amp - Full load

Lifting Capacity
• 3,000 lbs – 1-2 layers of cable (54' of 5/16" cable)
• 2,650 lbs – 3 layers of cable (100' of 5/16" cable)
• 2,150 lbs – full drum of cable (160' of 5/16" cable)

Drum Storage Shipping Weight
• 1/4" - 250' 132 lbs
• 5/16" - 160'
• 3/8" - 110'

82

GRIPHOIST - MANUAL / ELECTRIC HOIST

Griphoist / Tirfor® - Wire Rope Hoist

Model No. TU-32

MULTIPLE OPERATION
• Works in any position, horizontal, vertical or angled
• Unlimited length of wire rope

SIMPLE
• Fast and easy installation and use
• Simple to install or remove the wire rope
• Continuous operation without jerking
• Changeover from forward to reverse operation by

transferring the operating handle from one lever to another

Normal capacity 8,000* / 6,000**
Machine weight 59.5 lbs.
Machine dimensions
Handle ext./closed 27" x 13" x 6-1/8"
Wire rope diameter 45” / 26”
Min. W.R. breaking strain 5/8"
40,000 lbs.

* capacity for material handling ** capacity for manriding

Portable Electric Hoist Model No. TR50 Blocstop® Safety
Device for Wire Rope
Model No. TR50 Dimensions L x W x D in. 19 x 9 x 17
• Portable and powerful Model No. BS 35.30
Weight without wire rope 71 lbs. The Blocstop® may be used:
for unlimited heights • Mounted on a separate safety wire
of lift WLL lbs. Direct 1,000
• Pendant control Sheaved 2,000 rope if required by safety regulations
for suspended scaffolding and
Speed rpm Direct 23 platforms. The Blocstop® holds the
Sheaved 11.5 load safely should there be any
defect in the suspension wire rope
Power Supply 115 V or malfunction of the lifting machine.
• Mounted on the suspension or
tensioned wire rope, the Blocstop®
protects the load against malfunction
of the lifting / tensioning device.

Capacity 6,000 lbs.
Weight 20 lbs.
Wire rope dia. 5/8"

www.SuperiorToolRental.com 877-446-4352 83

Snatch Blocks, Swivels, Wedge Sockets

4 Ton 8 Ton 8 Ton 12 Ton 12 Ton

15 Ton 20 Ton 20 Ton

84

SNATCH BLOCKS – SINGLE SHEAVE

419 With Shackle 419 Snatch Blocks 421 With Shackle 421 Snatch Blocks

Model Wire Working Model Wire Working
Rope Load
Sheave No. Rope Load Sheave No. Size Limit
(in.) (ton)*
Dia. Bearing 419 with Size Limit Dia. Bearing 421 with

(in.) Code Shackle (in.) (ton)* (in.) Code Shackle

**3 BB 109091 5/16 - 3/8 2 6 BB 169481 3/4 - 7/8 12
6 RB 204120 3/4 - 7/8 12
**3 BB 109037• 5/16 - 3/8 2 8 BB 169515 3/4 - 7/8 15
**4-1/2 BB 109064 3/8 - 1/2 4 8 RB 204193 3/4 - 7/8 15
BB 109126 5/8 - 3/4 8 10 BB 110720 3/4 - 7/8 15
6 10 RB 110757 3/4 - 7/8 15

6 RB 109153 5/8 - 3/4 8 * Ultimate Load is 4 times the Working Load Limit.
8 BB 109224 5/8 - 3/4 8 Bearing Code: RB = Roller Bearing BB = Bronze Bearing
8 RB 109251 5/8 - 3/4 8

10 BB 109322 5/8 - 3/4 8

10 RB 109359 5/8 - 3/4 8

12 BB 202961 5/8 8 431 With Shackle 431 Snatch Blocks

12 RB 169347 5/8 8 Model Wire Working
12 BB 109420 3/4 8 Load
12 RB 109457 3/4 8 Sheave No. Rope Limit
(ton)*
Dia. Bearing 431 with Size

14 BB 169356 5/8 8 (in.) Code Shackle (in.)
14 RB 167857 5/8 8
14 BB 109527 3/4 8 8 BB 121022 1- 1-1/8 20

14 RB 109545 3/4 8 8 RB 121040 1- 1-1/8 20
16 BB 203041 3/4 15
16 RB 203087 3/4 15 10 BB 121095 1- 1-1/8 20

10 RB 121111 1- 1-1/8 20

12 BB 169917 1 20

16 BB 109607 7/8 15 12 RB 209303 1 20
16 RB 109625 7/8 15
18 BB 203130 7/8 15 12 BB 121175 1-1/8 20

12 RB 121193 1-1/8 20

18 RB 203176 7/8 15 14 BB 209321 1 20
18 BB 109643 1 15
18 RB 109661 1 15 14 RB 170424 1 20

14 BB 121255 1-1/8 20

14 RB 121273 1-1/8 20

* Ultimate Load is 4 times the Working Load Limit. 18 BB 209410 1 25
** Available in Bronze Brushed only. 3" and 4-1/2" have self
18 RB 249465 1 25
lubricating Bronze Bushing.
• Fitted with 1-1/4" ID Swivel Eye. 18 BB 119561 1-1/8 25
Bearing Code: RB = Roller Bearing BB = Bronze Bearing
18 RB 119570 1-1/8 25

20 BB 209483 1-1/8 30

20 RB 169864 1-1/8 30

20 BB 119589 1-1/4 30

20 RB 119598 1-1/4 30

24 BB 209526 1-1/8 30

24 RB 209553 1-1/8 30

24 BB 119605 1-1/4 30

24 RB 119614 1-1/4 30

* Ultimate Load is 4 times the Working Load Limit.
Bearing Code: RB = Roller Bearing BB = Bronze Bearing

SNATCH BLOCKS – DOUBLE SHEAVE

409 With Shackle 409 Double Sheave with Shackle Double Sheave with Shackle

Model Wire Working Sheave Model Wire Rope Working
Dia. No.
Sheave No. Rope Load (in.) Size Load Limit

Diameter Bearing 409 with Size Limit (in.) (ton)

(in.) Code Shackle (in.) (ton) 15 MT

•4-1/2 BB 105022 3/8 - 1/2 4 6 DB 15D 6BS 5/8 - 3/4 15
6 BB 105102 5/8 - 3/4 12 6 DB 15D 6RS 5/8 - 3/4 15
6 RB 105120 5/8 - 3/4 12 8 DB 15D 8BS 3/4 - 7/8 15
8 BB 105184 5/8 - 3/4 12 8 DB 15D 8RS 3/4 - 7/8 15
8 RB 105200 5/8 - 3/4 12 10 DB 15D 10BS 3/4 - 7/8 15
10 BB 105264 5/8 - 3/4 12 10 DB 15D 10RS 3/4 - 7/8 15
10 RB 105282 5/8 - 3/4 12 12 DB 15D 12BS 3/4 - 7/8 15
12 BB 195185 5/8 12 12 DB 15D 12RS 3/4 - 7/8 15
12 RB 195229 5/8 12 14 DB 15D 14BS 3/4 - 7/8 15
12 BB 105344 3/4 12 14 DB 15D 14RS 3/4 - 7/8 15
12 RB 105362 3/4 12
14 BB 195247 5/8 12 20 MT
14 RB 195265 5/8 12
14 BB 105424 3/4 12 8 DB 20D 8BS 1 – 1-1/8 20
14 RB 105442 3/4 12 8 DB 20D 8RS 1 – 1-1/8 20
10 DB 20D 10BS 1 – 1-1/8 20
• Available in Bronze Brushed only 10 DB 20D 10RS 1 – 1-1/8 20
12 DB 20D 12BS 1 – 1-1/8 20
Bearing Code: RB = Roller Bearing 12 DB 20D 12RS 1 – 1-1/8 20
14 DB 20D 14BS 1 – 1-1/8 20
BB = Bronze Bearing 14 DB 20D 14RS 1 – 1-1/8 20

www.SuperiorToolRental.com 877-446-4352 85

SWIVELS EQUIPPED WITH TAPERED ROLLER THRUST BEARING
86 • Suitable for frequent rotation under load.
• All swivels individually proof tested with certification.
• All Hooks furnished with latches assembled.
• All jaws complete with bolts, nuts and cotter pins.
• Pressure lube fitting provided.
• NOT TO BE USED ON DEMOLITION (WRECKING) BALLS.

• IMPORTANT - Crosby Swivels should only be used with the recommended wire rope.
Contact the wire rope manufacturer for the proper wire rope to be used with Crosby Swivels.

S-1 Jaw & Hook

S-1 Working Wire Weight Dimensions (in.)
Stock Load Rope Each
Swivel Limit Size
No. No. (t*) (in.) (lbs.)
A F G H J K L M N O P V
4.84 2.75 .75 .88 1.62 1.53 1.41 1.31 1.00 1.44 1.12
3-S-1 297011 3 1/2 9.81 11.44 6.28 3.00 .88 1.00 2.25 1.94 1.62 1.12 1.00 1.81 1.44
5-S-1 297217 5 7.54 4.00 1.00 1.56 2.81 2.46 2.22 2.12 1.38 2.25 1.62
8-S-1 297413 8-1/2 5/8 15.51 13.34 8.34 4.50 1.50 1.75 3.38 2.59 2.41 3.50 1.75 2.59 1.94
10-S-1 297618 10 10.34 5.00 1.50 1.75 3.38 2.81 3.19 3.50 1.75 3.00 2.38
15-S-1 297814 15 3/4 29.42 16.45 13.62 6.00 2.00 2.00 4.62 3.44 3.62 3.69 2.38 3.66 3.00
25-S-1 298118 25 14.06 6.50 2.00 2.00 4.62 3.88 3.75 3.69 2.38 4.56 3.19
35-S-1 298216 35 7/8 46.75 19.75 15.44 7.00 2.25 2.50 5.00 4.75 4.25 4.00 3.00 5.06 3.25
45-S-1 298314 45
1 73.75 22.24

- 140.00 26.78

- 220.00 29.94

- 251.00 35.06

S-2 Jaw & Jaw

S-2 Working Wire Weight Dimensions (in.)
Stock Load Rope Each
Swivel Limit Size
No. No. (t)* (in.) (lbs.)
B G H J K N O
3-S-2 297020 3 1/2 9.63 9.28 2.75 .75 .88 1.62 1.31 1.00
5-S-2 297226 5 10.31 3.00 .88 1.00 2.25 1.62 1.12
8-S-2 297422 8-1/2 5/8 13.69 12.62 4.00 1.00 1.56 2.81 2.12 1.38
10-S-2 297627 10 16.75 4.50 1.50 1.75 3.38 3.50 1.75
15-S-2 297823 15 3/4 26.16 17.12 5.00 1.50 1.75 3.38 3.50 1.75
25-S-2 298127 25 20.75 6.00 2.00 2.00 4.62 3.69 2.38
35-S-2 298225 35 7/8 45.75 20.75 6.50 2.00 2.00 4.62 3.69 2.38
45-S-2 298323 45 25.25 7.00 2.25 2.50 5.00 4.00 3.00
1 62.75

- 140.00

- 155.00

- 235.00

S-3 Jaw & Eye

S-3 Working Wire Weight Dimensions (in.)
Stock Load Limit Rope Each
Swivel Size
No. No. (t)* (in.) (lbs.)
C G H J K N O Q R S T
3-S-3 2.75 .75 .88 1.62 1.31 1.00 .75 1.03 1.12 1.25
5-S-3 297039 3 1/2 9.12 9.34 3.00 .88 1.00 2.25 1.62 1.12 1.00 1.28 1.25 1.25
8-S-3 4.00 1.00 1.56 2.81 2.12 1.38 1.25 1.41 1.62 1.50
10-S-3 297235 5 5/8 13.50 10.06 4.50 1.50 1.75 3.38 3.50 1.75 1.69 1.69 2.75 1.88
15-S-3 5.00 1.50 1.75 3.38 3.50 1.75 1.94 2.03 2.75 2.12
25-S-3 297431 8-1/2 3/4 24.90 12.25 6.00 2.00 2.00 4.62 3.69 2.38 2.25 2.31 3.88 2.38
35-S-3 6.50 2.00 2.00 4.62 3.69 2.38 2.25 2.31 3.88 2.38
45-S-3 297636 10 7/8 43.50 16.12 7.00 2.25 2.50 5.00 4.00 3.00 2.50 2.53 4.00 3.00

297832 15 1 61.00 16.75

298136 25 - 135.00 21.50

298234 35 - 150.00 21.50

298332 45 - 225.00 25.88

S-4 Eye & Jaw

S-4 Working Wire Weight Dimensions (in.)
Stock Load Limit Rope Each
Swivel Size
No. No.
(t*) (in.) (lbs.) C G H J K N O Q R S T
2.75 .75 .88 1.62 1.31 1.00 .75 1.03 1.12 1.25
3-S-4 297048 3 1/2 9.00 9.34 3.00 .88 1.00 2.25 1.62 1.12 1.00 1.28 1.25 1.25
5-S-4 297244 5 4.00 1.00 1.56 2.81 2.12 1.38 1.25 1.41 1.62 1.50
8-S-4 297440 8-1/2 5/8 12.33 10.06 4.50 1.50 1.75 3.38 3.50 1.75 1.69 1.69 2.75 1.88
10-S-4 297645 10 5.00 1.50 1.75 3.38 3.50 1.75 1.94 2.03 2.75 2.12
15-S-4 297841 15 3/4 29.00 12.25 6.00 2.00 2.00 4.62 3.69 2.38 2.25 2.31 3.88 2.38
25-S-4 298145 25 6.50 2.00 2.00 4.62 3.69 2.38 2.25 2.31 3.88 2.38
35-S-4 298243 35 7/8 44.00 16.12 7.00 2.25 2.50 5.00 4.00 3.00 2.50 2.53 4.00 3.00
45-S-4 298341 45
1 61.00 16.75

- 135.00 21.50

- 150.00 21.50

- 225.00 25.88

S-5 Eye & Eye

S-5 Working Wire Weight Dimensions (in.)
Stock Load Limit Rope Each
Swivel Size
No. No.
(t*) (in.) (lbs.) D G Q R S T

3-S-5 297057 3 1/2 8.50 9.41 2.75 .75 1.03 1.12 1.25
5-S-5 297253 5 5/8 11.30 9.81 3.00 1.00 1.28 1.25 1.25
8-S-5 297459 8-1/2 3/4 29.25 11.88 4.00 1.25 1.41 1.62 1.50
10-S-5 297654 10 7/8 42.00 15.50 4.50 1.69 1.69 2.75 1.88
15-S-5 297850 15 16.38 5.00 1.94 2.03 2.75 2.12
25-S-5 298154 25 1 49.00 22.25 6.00 2.25 2.31 3.88 2.38
35-S-5 298252 35 - 130.00 22.25 6.50 2.25 2.31 3.88 2.38
45-S-5 298350 45 - 145.00 26.50 7.00 2.50 2.53 4.00 3.00
- 215.00

S-6 Eye & Hook

S-6 Working Wire Weight Dimensions (in.)
Stock Load Limit Rope Each
Swivel Size
No. No.
(t*) (in.) (lbs.) E F G L M P Q R S T V
11.50 4.84 2.75 1.53 1.41 1.44 .75 1.03 1.12 1.25 1.12
3-S-6 297066 3 1/2 9.32 13.09 6.28 3.00 1.94 1.69 1.81 1.00 1.28 1.25 1.25 1.44
5-S-6 297262 5 5/8 14.24 16.07 7.54 4.00 2.46 2.22 2.25 1.25 1.41 1.62 1.50 1.62
8-S-6 297468 8-1/2 3/4 32.00 19.12 8.34 4.50 2.59 2.41 2.59 1.69 1.69 2.75 1.88 1.94
10-S-6 297663 10 7/8 45.50 21.24 10.34 5.00 2.81 3.19 3.00 1.94 2.03 2.75 2.12 2.38
15-S-6 297869 15 27.53 13.62 6.00 3.44 3.62 3.66 2.25 2.31 3.88 2.38 3.00
25-S-6 298163 25 1 68.00 30.69 14.06 6.50 3.88 3.75 4.56 2.25 2.31 3.88 2.38 3.19
35-S-6 298261 35 - 135.00 35.69 15.44 7.00 4.75 4.25 5.06 2.50 2.53 4.00 3.00 3.25
45-S-6 298369 45 - 215.00
- 270.00

* Individually Proof Tested to 2 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit.

ANGULAR CONTACT BEARING SWIVELS • Designed for high rotation speed: Lower torque
required to initiate rotation.
• Wide range of product available.
• Capacity: 0.45 through 35 tons • Hook models utilize genuine Crosby hooks which
• Wire Rope Sizes: 1/8" through 1-1/2" are forged alloy steel, Quenched and Tempered and
contain patented QUIC-CHECK® markings.
• Individually Proof Tested to 2 times the Working Load
Limit with certification. • Each swivel, 8.5 tons and larger is furnished with a
pressure lubrication fitting.
• Design Factor of 5 to 1.
• Entire swivel is Zink plated to resist corrosion.
• Angular contact bearings maximize efficiency, reliability and

service life of swivel and extend the life of the wire rope.

AS-20 Thimble Insert Wire Rope Size AS-20
(in.)
• When terminating with wire rope clips, 1038200
we recommend the use of the Thimble Insert. 1/2 1038209
The result will be extended wire rope life. 5/8 1038218
3/4 1038227
• Allows standard swivel to be used in 7/8 1038236
application requiring a thimble fitting. 1-1/8 - 1-1/4 1038245
1-1/2
• For use with our Bullet Style (AS-7) and
Jaw Style (AS-1, AS-2, AS-3 & AS-4) swivels.

• Machined from carbon steel. Zink plated.

AS-1 Jaw & Hook

Working Wire AS-1 Weight Dimensions (in.) Deformation Replacement
Load Rope Stock Each Indicator Latch Kit
Limit Size (lbs.) A B C D E F GH I AA Stock No.
(tons*) (in.) No. .88 .25 .25 .38 .41 4.32 2.86 .93 .73
.7 1.31 .38 .31 .44 .56 5.44 3.16 .97 .84
.45 1/8 1016001 1.5 1.63 .50 .50 .69 .78 6.35 4.00 1.16 1.14 1.50 1096325
2.3 2.00 .75 .75 .94 1.19 8.69 4.84 1.41 1.44 1.50 1096374
.75 1/4 1016010 6.5 2.50 .88 1.00 1.13 1.53 10.71 6.28 1.69 1.82 1.50 1096374
12.9 3.00 1.19 1.56 1.34 2.09 13.65 8.34 2.41 2.60 2.50 1096374
1.5 3/8 1016025 26.4 4.00 1.50 1.75 1.75 3.50 17.95 10.34 3.19 3.00 3.00 1096562
53.0 4.00 1.50 1.75 1.75 3.50 17.95 10.34 3.19 3.00 4.00 1096656
3.0 1/2 1016026 53.0 5.00 2.00 2.00 2.38 3.69 20.88 13.62 3.25 3.62 5.00 1096704
97.0 5.00 2.00 2.00 2.38 3.69 24.00 14.06 3.00 4.56 5.00 1096704
5.0 5/8 1016040 140.0 6.50 1090161
7.00 1090189
8.5 3/4 1016045

10 7/8 1016056

15 1 1016064

25 1-1/4 1016075

35 1-1/2 1016082

AS-2 Jaw & Jaw

Working Wire AS-2 Weight Dimensions (in.)
Load Rope Stock Each
Limit Size (lbs.) A B C D E F G H
(tons*) (in.) No. .88 2.38 3.13 .38 .25 .25 .19 .41
.4 1.31 3.56 4.44 .44 .31 .38 .22 .56
.45 1/8 1016103 .9 1.63 4.06 5.44 .69 .50 .50 .28 .78
2.0 2.00 6.25 8.13 .94 .75 .75 .38 1.19
.75 1/4 1016114 4.9 2.50 7.75 10.63 1.13 1.00 .88 .53 1.53
9.6 3.00 9.63 12.31 1.34 1.56 1.19 .56 2.09
1.5 3/8 1016122 15.8 4.00 14.00 17.50 1.75 1.75 1.50 .81 3.50
40.0 4.00 14.00 17.50 1.75 1.75 1.50 .81 3.50
3.0 1/2 1016131 40.0 5.00 15.94 20.69 2.38 2.00 2.00 1.13 3.69
78.0 5.00 15.94 20.69 2.38 2.00 2.00 1.13 3.69
5.0 5/8 1016139 78.0

8.5 3/4 1016148

10 7/8 1016157

15 1 1016166

25 1-1/4 1016175

35 1-1/2 1016184

AS-3 Jaw & Eye

Working Wire AS-3 Weight Dimensions (in.)
Load Rope Stock Each
Limit Size (lbs.) A BC D E F G H I J K L
(tons*) (in.) No. .88 2.50 3.25 .25 .19 .25 .38 .41 .25 .25 .38 .84
.3 1.31 3.69 4.56 .31 .22 .38 .44 .56 .31 .38 .44 .88
.45 1/8 1016205 .9 1.63 4.19 5.44 .50 .28 .50 .69 .78 .50 .66 .63 1.38
1.9 2.00 6.19 8.13 .75 .38 .75 .94 1.19 .75 .91 1.00 2.00
.75 1/4 1016216 4.6 2.50 7.88 10.19 1.00 .53 .88 1.13 1.50 1.00 1.25 1.19 2.63
9.1 3.00 9.50 12.25 1.56 .56 1.25 1.34 2.09 1.25 1.41 1.50 3.13
1.5 3/8 1016224 15.6 4.00 13.75 17.31 1.75 .81 1.50 1.75 3.50 1.72 1.63 1.81 4.69
39.0 4.00 13.44 17.31 1.75 .81 1.50 1.75 3.50 2.00 2.00 2.13 4.69
3.0 1/2 1016232 40.0 5.00 16.00 20.75 2.00 1.13 2.00 2.38 3.69 2.25 2.31 2.38 5.25
78.0 5.00 16.00 20.75 2.00 1.13 2.00 2.38 3.69 2.25 2.31 2.38 5.2
5.0 5/8 1016243 78.0

8.5 3/4 1016250

10 7/8 1016259

15 1 1016268

25 1-1/4 1016277

35 1-1/2 1016286

AS-4 Eye & Jaw

Working Wire AS-4 Weight Dimensions (in.)
Load Rope Stock Each
Limit Size (lbs.) A BC D E F G H I J K L
(tons*) (in.) No. .88 2.50 3.25 .25 .19 .25 .38 .41 .25 .25 .38 .81
.3 1.31 3.63 4.56 .31 .22 .38 .44 .56 .31 .38 .44 .88
.45 1/8 1016306 .9 1.63 4.19 5.50 .50 .28 .50 .69 .78 .50 .66 .63 1.34
1.9 2.00 6.19 8.13 .75 .38 .75 .94 1.19 .75 .91 1.00 2.00
.75 1/4 1016314 4.6 2.50 7.88 10.19 1.00 .53 .88 1.13 1.44 1.00 1.25 1.19 2.63
9.1 3.00 9.44 12.25 1.56 .56 1.19 1.34 2.09 1.25 1.41 1.50 3.13
1.5 3/8 1016325 15.7 4.00 14.13 17.75 1.75 .81 1.50 1.75 3.50 1.72 1.66 1.81 4.69
39.0 4.00 13.81 17.75 1.75 .81 1.50 1.75 3.50 2.00 2.03 2.13 4.69
3.0 1/2 1016332 40.0 5.00 15.94 20.75 2.00 1.13 2.00 2.38 3.69 2.25 2.31 2.38 5.25
75.0 5.00 15.94 20.75 2.00 1.13 2.00 2.38 3.69 2.25 2.31 2.38 5.25
5.0 5/8 1016343 75.0
87
8.5 3/4 1016352

10 7/8 1016361

15 1 1016370

25 1-1/4 1016375

35 1-1/2 1016379

* Ultimate Load is 5 times the Working Load Limit. Individually Proof Tested to 2 times the Working Load Limit.

www.SuperiorToolRental.com 877-446-4352

ANGULAR CONTACT BEARING SWIVELS

AS-5 Eye & Eye

Working Wire AS-5 Weight Dimensions (in.)
Load Rope Stock Each
Limit Size (lbs.) A B C D E F G
(tons*) (in.) No. .88 2.63 3.38 .38 .25 .25 .81
.3 1.31 3.75 4.63 .44 .31 .38 .88
.45 1/8 1016409 .9 1.63 4.31 5.56 .63 .50 .66 1.34
1.8 2.00 6.13 8.13 1.00 .75 .91 2.00
.75 1/4 1016418 4.3 2.50 7.75 10.63 1.19 1.00 1.25 2.63
8.6 3.00 9.31 12.31 1.50 1.25 1.41 3.13
1.5 3/8 1016427 15.4 4.00 13.88 17.50 1.81 1.72 1.63 4.69
37.0 4.00 13.25 17.50 2.13 2.00 2.13 4.69
3.0 1/2 1016436 39.0 5.00 16.00 20.75 2.38 2.25 2.31 5.25
72.0 5.00 18.00 20.75 2.38 2.25 2.31 5.25
5.0 5/8 1016445 72.0

8.5 3/4 1016454

10 7/8 1016463

15 1 1016472

25 1-1/4 1016481

35 1-1/2 1016490

AS-6 Eye & Hook

Working Wire AS-6 Weight Dimensions (in.) Deformation Replacement
Load Rope Stock Each Indicator Latch Kit
Limit Size (lbs.) A B C D E F G H AA Stock No.
(tons*) (in.) No. .88 4.36 2.86 .93 .25 .25 .73 .93
.7 1.31 5.56 3.16 .97 .38 .31 .84 .97
.45 1/8 1016502 1.5 1.63 6.22 4.00 1.16 .66 .50 1.14 1.16 1.50 1096325
2.9 2.00 8.63 4.84 1.41 .91 .75 1.44 1.41 1.50 1096374
.75 1/4 1016513 6.2 2.50 10.77 6.28 1.69 1.25 1.00 1.82 1.69 1.50 1096374
12.4 3.00 13.52 8.34 2.41 1.40 1.25 2.60 2.41 2.50 1096374
1.5 3/8 1016520 23.5 4.00 18.08 10.34 3.19 1.66 1.72 3.00 3.19 3.00 1096562
52.0 4.00 17.64 10.34 3.19 2.03 2.00 3.00 3.19 4.00 1096657
3.0 1/2 1016529 53.0 5.00 20.88 13.62 2.25 2.34 2.25 3.62 3.25 5.00 1096704
94.0 5.00 24.00 14.06 3.00 2.34 2.25 4.56 3.00 5.00 1096704
5.0 5/8 1016538 138.0 6.50 1090161
7.00 1090189
8.5 3/4 1016547

10 7/8 1016556

15 1 1016565

25 1-1/4 1016574

35 1-1/2 1016583

AS-7 Bullet Style Jaw & Jaw

Working Wire AS-7 Weight Dimensions (in.)
Load Rope Stock Each
Limit Size (lbs.) A B C D E F G
(tons*) (in.) No. 2.38 3.13 .38 .25 .31 .40
3.56 4.44 .44 .31 .38 .56
.45 1/8 1016604 .4 .88 4.06 5.19 .56 .50 .44 .81
5.44 7.06 .81 .75 .63 .94
.75 1/4 1016611 1.1 1.31 7.75 10.06 1.13 1.00 .88 1.56
9.88 12.38 1.25 1.31 1.00 2.13
1.5 3/8 1016622 1.8 1.63 13.13 16.75 1.75 1.75 1.50 3.25
13.13 16.75 1.75 1.75 1.50 3.25
3.0 1/2 1016631 3.8 2.00 15.94 20.75 2.38 2.00 2.00 3.69
15.94 20.75 2.38 2.00 2.00 3.69
5.0 5/8 1016640 8.0 2.50

8.5 3/4 1016649 14.5 3.00

10 7/8 1016652 40.0 4.00

15 1 1016658 40.0 4.00

25 1-1/4 1016662 84.0 5.00

35 1-1/2 1016667 84.0 5.00

AS-11 Thimble & Jaw

Working Wire AS-11 Weight Dimensions (in.)
Load Rope Stock Each
Limit Size (lbs.) A B C D E F G
(tons*) (in.) No. 3.00 8.66 13.00 1.34 1.56 1.19 2.09
4.00 11.66 17.53 1.75 1.78 1.50 3.50
8.5 3/4 1017020 18.0

15 1 1017029 42.0

AS-14 Thimble & Bullet

Working Wire AS-14 Weight Dimensions (in.)
Load Rope Stock Each
Limit Size (lbs.) A B C D E F G
(tons*) (in.) No. 3.00 9.00 13.25 1.25 1.31 1.00 2.13
4.00 11.50 17.38 1.75 1.75 1.50 3.25
8.5 3/4 1017225 20.0 4.00 14.31 21.19 2.38 2.00 2.00 3.69

15 1 1017258 40.0

25 1-1/4 1017261 81.0

AS-17 Bullet Style Jaw & Jaw Slurry Swivel

Working Wire AS-17 Weight Dimensions (in.)
Load Rope Stock Each
Limit Size
(tons*) (in.) No. (lbs.)
A BC DE F G

8.5 3/4 8013342 14.5 3.00 10.13 12.63 1.25 1.31 1.00 2.13

15 1 8013343 40.0 4.00 13.50 17.00 1.75 1.75 1.50 3.25

25 1-1/4 8013376 84.0 5.00 16.16 20.92 2.38 2.00 2.00 3.69

35 1-1/2 8013344 84.0 5.00 16.16 20.92 2.38 2.00 2.00 3.69

45 - 8013585 150.0 6.00 20.25 26.25 3.00 2.53 2.25 2.75

• The Crosby AS-17 Slurry Swivel is a zinc plated Bullet Type Swivel (AS-7), designed with two

rubber lip style seals about the shaft. The threaded cap is sealed with a silicone sealant and

secured with a set screw. The wwivels are provided with an Alemite grease fitting for easy lubrication.

* Ultimate Load is 5 times the Working Load Limit. Individually Proof Tested to 2 times the Working Load Limit.

88

WEDGE SOCKETS & WIRE ROPE

• Wedge socket terminations have an efficiency rating of 80% based on the
catalog strength of XXIP wire rope.

• Pin diameter and jaw opening allows wedge and socket to be used in conjunction
with closed swage and spelter sockets.

• Secures the tail or “dead end” of the wire rope to the wedge, thus eliminates
loss or “Punch out” of the wedge.

• Incorporates Crosby’s patented QUIC-CHECK® “Go” and “No-Go” feature
cast into the wedge. The proper size rope is determined when the following
criteria are met:
• 1) The wire rope should pass thru the “Go” hole in the wedge.
• 2) The wire rope should NOT pass thru the “No-Go” hole in the wedge.

• Utilizes standard Crosby Red-U-Bolt® wire rope clip.

S-421T Wedge Sockets Assembly
Includes Socket, Wedge, Pin and Wire
Rope Clip

Wire Rope S-421T S-421 TW Optional
Dia. Stock Stock No. G-4082
(in.) Wedge Only Bolt, Nut & Cotter
3/8 No.
1/2 1035000 1035555 1092227
5/8 1035009 1035564 1092236
3/4 1035018 1035573 1092254
7/8 1035027 1035582 1092281
1 1035036 1035591 1092307
1-1/8 1035045 1035600 1092325
1-1/4 1035054 1035609 1092343
1035063 1035618 1092372

WIre S-421T Dimensions (in.)
Rope Dia. Stock
A B C D G H J K L P R S T U V
(in.) No. 5.69 2.72 81 .81 1.38 3.06 7.80 1.88 .88 1.56 .44 2.13 .44 1.25 1.38
6.88 3.47 1.00 1.00 1.62 3.76 8.91 1.26 1.06 1.94 .50 2.56 .53 1.75 1.88
3/8 1035000 8.25 4.30 1.25 1.19 2.12 4.47 10.75 1.99 1.22 2.25 .56 3.25 .69 2.00 2.19
1/2 1035009 9.88 5.12 1.50 1.38 2.44 5.28 12.36 2.41 1.40 2.63 .66 3.63 .78 2.34 2.56
5/8 1035018 11.25 5.85 1.75 1.63 2.69 6.16 14.37 2.48 1.67 3.13 .75 4.31 .88 2.69 2.94
3/4 1035027 12.81 6.32 2.00 2.00 2.94 6.96 16.29 3.04 2.00 3.75 .88 4.70 1.03 2.88 3.28
7/8 1035036 14.38 6.92 2.25 2.25 3.31 7.62 18.34 2.56 2.25 4.25 1.00 5.44 1.10 3.25 3.56
1035045 16.34 8.73 2.62 2.50 3.56 9.39 20.48 2.94 2.34 4.50 1.06 6.13 1.19 4.62 4.94
1 1035054
1-1/8 1035063
1-1/4

NOTE: For intermediate wire rope sizes, use next larger size socket.

Minimum breaking force of standard wire rope used on Superior’s pneumatic tuggers.

6 x 19 IWRC (XIP) Strength and Weights Chart

Diameter Weight Minimum Diameter Weight Minimum Diameter Weight Minimum
(in.) (lb/ft) Breaking Force (in.) (lb/ft) Breaking Force (in.) (lb/ft) Breaking Force

1/4 0.116 (lbs.) (lbs.) 3.50 (lbs.)
5/16 0.18 4.16
3/8 0.26 6,800 5/8 0.72 41,200 1-3/8 4.88 192,000
7/16 0.35 10,540 3/4 1.04 58,800 1-1/2 5.67 228,000
1/2 0.46 15,540 7/8 1.42 79,600 1-5/8 6.50 264,400
9/16 0.59 20,400 1.85 103,400 1-3/4 7.39 306,000
26,600 1 2.34 130,000 1-7/8 348,000
33,600 1-1/8 2.89 159,800 396,000
1-1/4 2

Overhaul Ball Assembly Split Overhaul Balls

UB500 Working Weight UB500 Working Weight • Attaches easily to Wire Rope.
“E” Load Limit Each “E” Load Limit Each
(lbs.) (lbs.) Part No. Wire Weight Ball
Eye Hook (tons) Eye Hook (tons) Rope Each Dia.
Part No. 58 Part No. 216 2003822 Sizes (lbs.)
1036000* 4 102 1036144* 12 258 2003830 (in.) (in.)
1036009* 4 162 1036153* 12 365 2003831 15 5.06
1036027* 4 201 1036171* 12 403 2003832 1/4 - 5/16 20 5.38
1036036* 4 109 1036180* 12 718 50 7.12
1036045* 7 170 1036189* 12 298 3/8 100 9.19
1036054* 7 210 1036198* 15 456
1036072* 7 321 1036207* 15 753 1/2 - 5/8
1036081* 7 216 1036216* 15 1311
1036090* 10 260 1036225* 15 298 5/8 - 3/4 - 7/8
1036099* 10 365 1036234* 20 456
1036117* 10 403 1036243* 20 753
1036126* 10 718 1036252* 20 1311
1036135* 10 1036261* 20 533
1036270* 25 865
* Utilizes Crosby “N” style hooks with integrated latch. Replacement latch 1036279* 25 1421
kit is S-4055 latch will not fit. Standard Crosby S-5 Thrust style swivels can 1036288* 25 865
not be used with UB500 Overhaul Balls For replacement swivels, contact 1036297* 30 1421
Crosby Customer Service. 1036306* 30

www.SuperiorToolRental.com 877-446-4352 89

Shackles, Turnbuckles
& Ratchet Binders

90

SCREW PIN SHACKLES

PURCHASE or RENT

Screw Pin Shackles

• G-209 is Galvanized
• S-209 is Self Colored

Screw Pin Anchor Shackles

Nominal Working Stock Weight B C D Dimensions (in.) Tolerance +/–
Size Load No. Each
(in.) Limit E FG H L M PC A
(tons) G-209 S-209 (lbs.) A

3/16 1/3 1018357 - .06 .38 .25 .88 .19 .60 .56 .98 1.47 .16 1.14 .19 .06 .06

1/4 1/2 1018375 1018384 .10 .47 .31 1.13 .25 .78 .61 1.28 1.84 .19 1.43 .25 .06 .06

5/16 3/4 1018393 1018400 .18 .53 .38 1.22 .31 .84 .75 1.47 2.09 .22 1.71 .31 .06 .06

3/8 1 1018419 1018428 .31 .66 .44 1.44 .38 1.03 .91 1.78 2.49 .25 2.02 .38 .13 .06

7/16 1-1/2 1018437 1018446 .38 .75 .50 1.69 .44 1.16 1.06 2.03 2.91 .31 2.37 .44 .13 .06

1/2 2 1018455 1018464 .72 .81 .63 1.88 .50 1.31 1.19 2.31 3.28 .38 2.69 .50 .13 .06

5/8 3-1/4 1018473 1018482 1.37 1.06 .75 2.38 .63 1.69 1.50 2.94 4.19 .44 3.34 .69 .13 .06

3/4 4-3/4 1018491 1018507 2.35 1.25 .88 2.81 .75 2.00 1.81 3.50 4.97 .50 3.97 .81 .25 .06

7/8 6-1/2 1018516 1018525 3.62 1.44 1.00 3.31 .88 2.28 2.09 4.03 5.83 .50 4.50 .97 .25 .06

1 8-1/2 1018534 1018543 5.03 1.69 1.13 3.75 1.00 2.69 2.38 4.69 6.56 .56 5.13 1.06 .25 .06

1-1/8 9-1/2 1018552 1018561 7.41 1.81 1.25 4.25 1.16 2.91 2.69 5.16 7.47 .63 5.71 1.25 .25 .06

1-1/4 12 1018570 1018589 9.50 2.03 1.38 4.69 1.29 3.25 3.00 5.75 8.25 .69 6.25 1.38 .25 .06

1-3/8 13-1/2 1018598 1018605 13.53 2.25 1.50 5.25 1.42 3.63 3.31 6.38 9.16 .75 6.83 1.50 .25 .13

1-1/2 17 1018614 1018623 17.20 2.38 1.63 5.75 1.54 3.88 3.63 6.88 10.00 .81 7.33 1.62 .25 .13

1-3/4 25 1018632 1018641 27.78 2.88 2.00 7.00 1.84 5.00 4.19 8.86 12.34 1.00 9.06 2.25 .25 .13

2 35 1018650 1018669 45.00 3.25 2.25 7.75 2.08 5.75 4.81 9.97 13.68 1.22 10.35 2.40 .25 .13

2-1/2 55 1018678 1018687 85.75 4.13 2.75 10.50 2.71 7.25 5.69 12.87 17.84 1.38 13.00 3.13 .25 .25

BOLT TYPE SHACKLES

Bolt Type Anchor Shackles

• G-209 is Galvanized
• S-209 is Self Colored

Bolt Type Shackles

Nominal Working Stock Weight A B C Dimensions (in.) H L Tolerance +/–
Size Load No. Each
(in.) Limit (lbs.) DEF NCA
(tons) G-2130 S-2130

3/16 1/3 1019464 - .06 .38 .25 .88 .19 .60 .56 1.47 .98 .19 .06 .06

1/4 1/2 1019466 - .11 .47 .31 1.13 .25 .78 .61 1.84 1.28 .25 .06 .06

5/16 3/4 1019468 - .22 .53 .38 1.22 .31 .84 .75 2.09 1.47 .31 .06 .06

3/8 1 1019470 - .33 .66 .44 1.44 .38 1.03 .91 2.49 1.78 .38 .13 .06

7/16 1-1/2 1019471 - .49 .75 .50 1.69 .44 1.16 1.06 2.91 2.03 .44 .13 .06

1/2 2 1019472 1019481 .79 .81 .64 1.88 .50 1.31 1.19 3.28 2.31 .50 .13 .06

5/8 3-1/4 1019490 1019506 1.68 1.06 .77 2.38 .63 1.69 1.50 4.19 2.94 .69 .13 .06

3/4 4-3/4 1019515 1019524 2.72 1.25 .89 2.81 .75 2.00 1.81 4.97 3.50 .81 .25 .06

7/8 6-1/2 1019533 1019542 3.95 1.44 1.02 3.31 .88 2.28 2.09 5.83 4.03 .97 .25 .06

1 8-1/2 1019551 1019560 5.66 1.69 1.15 3.75 1.00 2.69 2.38 6.56 4.69 1.06 .25 .06

1-1/8 9-1/2 1019579 1019588 8.27 1.81 1.25 4.25 1.13 2.91 2.69 7.47 5.16 1.25 .25 .06

1-1/4 12 1019597 1019604 11.71 2.03 1.40 4.69 1.29 3.25 3.00 8.25 5.75 1.38 .25 .06

1-3/8 13-1/2 1019613 1019622 15.83 2.25 1.53 5.25 1.42 3.63 3.31 9.16 6.38 1.50 .25 .13

1-1/2 17 1019631 1019640 19.00 2.38 1.66 5.75 1.53 3.88 3.63 10.00 6.88 1.62 .25 .13

1-3/4 25 1019659 1019668 33.91 2.88 2.04 7.00 1.84 5.00 4.19 12.34 8.80 2.25 .25 .13

2 35 1019677 1019686 52.25 3.25 2.30 7.75 2.08 5.75 4.81 13.68 10.15 2.40 .25 .13

2-1/2 55 1019695 1019702 98.25 4.13 2.80 10.50 2.71 7.25 5.69 17.90 12.75 3.13 .25 .25

3 85 1019711 - 154.00 5.00 3.30 13.00 3.12 7.88 6.50 21.50 14.62 3.62 .25 .25

3-1/2 120 1019739 - 265.00 5.25 3.76 14.63 3.62 9.00 8.00 24.88 17.02 4.38 .25 .25

4 150 1019757 338.00 5.50 4.26 14.50 4.00 10.00 9.00 25.68 18.00 4.56 .25 .25

www.SuperiorToolRental.com 877-446-4352 91

ALLOY SCREW PIN SHACKLES PURCHASE or RENT

Alloy Screw Pin Shackles

• G-209 is Galvanized

Alloy Screw Pin Shackles

Nominal Working Stock Weight Dimensions (in.) Tolerance +/–
Size Load No. Each
(in.) Limit (lbs.)
(tons)* G-209A A B C D E F G H L M P CA

3/8 2 1017450 .31 .66 .44 1.44 .38 1.03 .91 1.78 2.49 .25 2.03 .38 .13 .06

7-1/6 2-2/3 1017472 .38 .75 .50 1.69 .44 1.16 1.06 2.03 2.91 .31 2.38 .44 .13 .06

1/2 3-1/3 1017494 .63 .81 .63 1.88 .50 1.31 1.19 2.31 3.28 .38 2.69 .50 .13 .06

5/8 5 1017516 1.38 1.06 .75 2.38 .63 1.69 1.50 2.94 4.19 .44 3.34 .69 .13 .06

3/4 7 1017538 2.35 1.25 .88 2.81 .75 2.00 1.81 3.50 4.97 .50 3.97 .81 .25 .06

7/8 9-1/2 1017560 3.61 1.44 1.00 3.31 .88 2.28 2.09 4.03 5.83 .50 4.50 .97 .25 .06

1 12-1/2 1017582 5.32 1.69 1.13 3.75 1.00 2.69 2.38 4.69 6.56 .56 5.07 1.06 .25 .06

1-1/8 15 1017604 7.25 1.81 1.25 4.25 1.16 2.91 2.69 5.16 7.47 .63 5.59 1.25 .25 .06

1-1/4 18 1017626 9.88 2.03 1.38 4.69 1.29 3.25 3.00 5.75 8.25 .69 6.16 1.38 .25 .06

1-3/8 21 1017648 13.25 2.25 1.50 5.25 1.42 3.63 3.31 6.38 9.16 .75 6.84 1.50 .25 .13

*Maximum Proof Load is 2 times the Working Load Limit (metric tons) and 2.2 times the Working Load Limit (short
tons). Minimum Ultimate Strenght is 4.5 times the Working Load Limit for metric tons, and 5 times the Working Load
Limit for short tons.

ALLOY BOLT TYPE SHACKLES

Alloy Bolt Type Anchor Shackles

• G-209 is Galvanized
• S-209 is Self Colored

Alloy Bolt Type Anchor Shackles

Nominal Working Stock Weight Dimensions (in.) Tolerance +/–
Size Load No. Each
(in.) Limit (lbs.) DE F G
(tons)* G-2140 S-2140 A B C 1.63 5.75 1.39 6.88 HJK LA E
2.00 7.00 1.75 8.81 7.73 10.00 3.88 1.53 .13 .25
1-1/2 30 1021110 1021129 18.8 2.38 3.62 1.62 2.25 7.75 2.00 10.16 9.33 12.34 5.00 1.84 .13 .25
2.75 10.50 2.62 12.75 10.41 13.68 5.75 2.08 .13 .25
1-3/4 40 1021138 1021147 33.8 2.88 4.19 2.25 3.25 13.00 3.00 14.62 13.58 17.90 7.25 2.71 .25 .25
3.75 14.63 3.75 17.02 15.13 21.50 7.88 3.12 .25 .25
2 55 1021156 1021165 49.9 3.25 4.81 2.40 4.25 14.50 4.00 18.00 17.62 24.88 9.00 3.62 .25 .25
4.75 15.19 4.58 20.84 20.37 25.68 10.00 4.00 .25 .25
2-1/2 85 1021174 1021183 103 4.12 5.81 3.12 5.00 18.50 4.48 23.63 23.11 27.81 11.00 4.75 .25 .25
6.00 18.72 4.89 24.76 24.28 32.63 13.00 5.00 .25 .25
3 120 1021192 - 162 5.00 6.50 3.63 7.00 22.50 6.50 26.00 25.45 34.28 13.00 5.88 .25 .25
28.68 40.25 13.00 6.00 .25 .25
3-1/2 •150 1021218 - 268 5.25 8.00 4.38

4 •175 1021236 - 332 5.50 9.00 4.56

4-3/4** •200 1021422 - 452 7.25 10.50 5.00

5 ** •250 1021442 - 594 8.50 12.00 5.63

6 •300 1021460 - 791 8.38 13.00 6.06

7 ** •400 1021478 - 1200 8.25 14.00 7.25

*Note: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Load is 4 times the Working
Load Limit on 200 thru 400 metric Tons. For sizes 30 thru 175 metric Tons, Minimum Ultimate Load is 5.4 times the
Working Load Limit. **Cast Alloy Steel.
•Furnished with round head bolts with an eyebolt for handling.

92

SCREW PIN SHACKLES

PURCHASE or RENT

Bow Shackles with Screw Collar Pin

• G-209 is Galvanized

Bow Shackles with Screw Collar Pin

Working Dimensions (in.) Weight
Width Each
Load Limit Diameter Diameter Diameter Width Width Length Width Length Length
Bow Pin Eye Eye Inside Inside Bow Bolt (lbs.)
(tons) B C D H
1/4 1/2 3/16 G 1-13/32
A 5/16 21/32 9/32 EF 5/8 1-29/32 IJ
3/8 25/32 11/32 25/32 2-7/32
0.33 3/16 7/16 7/8 13/32 3/8 7/8 7/8 1-5/32 1-1/32 0.05
1/2 7/16 1-1/32 2-1/2
0.5 1/4 5/8 1-1/32 1/2 15/32 1-5/32 1-5/32 2-29/32 1-1/2 1-11/32 0.11
3/4 1-11/32 5/8 1-1/4
0.75 5/16 7/8 1-9/16 3/4 17/32 1-1/4 1-11/16 3-1/2 1-27/32 1-9/16 0.22
1 1-13/16 7/8 2 4-11/32
1 3/8 1-1/8 2-1/16 31/32 21/32 1-7/16 2-9/32 5-3/32 2-1/8 1-13/16 0.3
1-1/4 2-5/16 1-3/32 2-11/16 5-21/32
1.5 7/16 1-3/8 2-19/32 1-1/4 3/4 1-11/16 2-15/16 6-15/32 2-11/32 2 0.42
1-1/2 2-27/32 1-3/8 3-9/32 7-9/32
2 1/2 1-5/8 3-5/32 1-1/2 7/8 2 3-5/8 7-29/32 2-7/8 2-9/32 0.79
2 3-15/32 1-25/32 3-29/32 8-15/16
3.25 5/8 2-1/4 4-1/16 1-31/32 1-1/16 2-17/32 4-31/32 9-13/16 3-1/2 2-15/16 1.38
2-1/4 5-7/16 11-13/16
4.5 3/4 2-9/16 4-3/8 2-9/16 1-7/32 3 6-5/16 13-1/32 4-1/16 3-1/2 2.22
2-3/4 5-1/8 7-3/32 14-27/32
6.5 7/8 5-23/32 1-13/32 3-9/32 17-1/16 4-11/16 4-1/32 3.31

8.5 1 1-11/16 3-3/4 5-13/32 4-21/32 4.86

9.5 1-1/8 1-27/32 4-1/4 6-1/32 5-5/32 6.97

12 1-1/4 2 4-17/32 6-11/16 5-25/32 9.49

13.5 1-3/8 2-1/4 5-1/4 7-5/16 6-3/8 12.24

17 1-1/2 2-3/8 5-3/4 8 6-7/8 16.37

25 1-3/4 2-29/32 7 9-9/16 8-1/2 28.31

35 2 3-9/32 7-3/4 10-23/32 9-3/8 40.01

42.5 2-1/4 3-3/4 8-3/4 12-7/32 10-25/32 57.96

55 2-1/2 4-1/8 10-1/4 13-17/32 12-7/32 82.89

BOLT TYPE SHACKLES
Bow Shackles with Safety Bolt

• G-209 is Galvanized

Bow Shackles with Safety Bolt

Working Dimensions (in.) Weight
Width Thickness Each
Load Diameter Diameter Diameter Width Width Length Width Length Length
Limit Bow Pin Eye Inside Inside Bow Bolt Nut (lbs.)
(tons) Eye D H I JK
9/32 1-29/32 1-11/32 5/32 0.13
A B C 11/32 EF G 2-7/32 1-21/32 1-9/16 3/16 0.25
13/32 2-1/2 1-31/32 1-13/16 5/16 0.34
0.5 1/4 5/16 21/32 7/16 15/32 1-5/32 25/32 2-29/32 2-3/8 2 7/16 0.48
1/2 3-1/2 2-5/8 2-9/32 1/2 0.92
0.75 5/16 3/8 25/32 5/8 17/32 1-1/4 7/8 4-11/32 3-7/32 2-15/16 21/32 1.62
3/4 5-3/32 3-27/32 3-1/2 3/4 2.59
1 3/8 7/16 7/8 7/8 21/32 1-7/16 1-1/32 5-21/32 4-1/2 4-1/32 7/8 3.9
31/32 6-15/32 5-1/8 4-21/32 31/32 5.69
1.5 7/16 1/2 1-1/32 1-3/32 3/4 1-11/16 1-5/32 7-9/32 5-29/32 5-5/32 1-1/16 8.06
1-1/4 7-29/32 6-17/32 5-25/32 1-3/16 10.81
2 1/2 5/8 1-11/32 1-3/8 7/8 2 1-1/4 8-15/16 6-3/8 1-5/8 14.42
1-1/2 9-13/16 7 6-7/8 3/4 18.06
3.25 5/8 3/4 1-9/16 1-25/32 1-1/16 2-17/32 1-11/16 11-13/16 7-3/4 8-1/2 29/32 31.34
1-31/32 13-1/32 7-15/16 9-3/8 1-1/32 43.77
4.75 3/4 7/8 1-13/16 2-1/4 1-7/32 3 2 14-27/32 9-13/16 10-23/32 1-5/32 62.46
2-9/16 17-1/16 10-19/32 12-7/32 1-1/4 87.27
6.5 7/8 1 2-1/16 2-7/8 1-13/32 3-9/32 2-9/32 20-3/4 11-27/32 13-3/8 1-17/32 136.69

8.5 1 1-1/8 2-5/16 1-11/16 3-3/4 2-11/16 13
14-31/32
9.5 1-1/8 1-1/4 2-19/32 1-27/32 4-1/4 2-15/16

12 1-1/4 1-3/8 2-27/32 2 4-17/32 3-9/32

13.5 1-3/8 1-1/2 3-5/32 2-1/4 5-1/4 3-5/8

17 1-1/2 1-5/8 3-15/32 2-3/8 5-3/4 3-29/32

25 1-3/4 2 4-1/16 2-29/32 7 4-31/32

35 2 2-1/4 4-3/8 3-9/32 7-3/4 5-7/16

42.5 2-1/4 2-9/16 5-1/8 3-3/4 8-3/4 6-5/16

55 2-1/2 2-3/4 5-23/32 4-1/8 10-1/4 7-3/32

85 3 3-1/4 6-3/8 5 12-15/16 7-15/32

www.SuperiorToolRental.com 877-446-4352 93

ALLOY BOLT TYPE SHACKLES PURCHASE or RENT

Bow Shackles with Safety Bolt

• G-209 is Galvanized

Bow Shackles with Safety Bolt

Working Dimensions (in.) Weight
Width Thickness Each
Load Diameter Diameter Diameter Width Width Length Width Length Length
Limit Bow Pin Eye Inside Inside Bow Bolt Nut (lbs.)
(tons) Eye D H I JK
1/2 3-1/2 2-9/32 1/2 0.97
A B C 5/8 EF G 4-11/32 3-7/32 2-15/16 21/32 1.74
3/4 5-3/32 3-27/32 3-1/2 3/4 2.78
3.3 1/2 5/8 1-11/32 7/8 7/8 2 1-1/4 5-21/32 4-1/2 4-1/32 7/8 4.14
31/32 6-15/32 4-21/32 31/32 6.13
5 5/8 3/4 1-9/16 1-3/32 1-1/16 2-17/32 1-11/16 7-9/32 5-1/8 5-5/32 1-1/16 8.53
1-1/4 7-29/32 5-29/32 5-25/32 1-3/16 11.6
7 3/4 7/8 1-13/16 1-3/8 1-7/32 3 2 8-15/16 6-17/32 6-3/8 1-5/16 15.3
1-1/2 9-13/16 6-7/8 3/4 19.38
9.5 7/8 1 2-1/16 1-25/32 1-13/32 3-9/32 2-9/32 11-13/16 7 8-1/2 29/32 33.07
2-1/4 13-7/16 7-3/4 9-29/32 1-1/32 48.50
12.5 1 1-1/8 2-5/16 2-3/4 1-11/16 3-3/4 2-11/16 17-7/32 7-15/16 12-19/32 1-1/4 92.59
3-9/32 21-1/16 9-13/16 14-1/32 1-9/16 154.32
15 1-1/8 1-1/4 2-19/32 3-19/32 1-27/32 4-1/4 2-15/16 25-15/32 11-1/4 16-27/32 1-31/32 246.92
4-1/32 27-3/32 13-17/32 19-3/32 2-3/8 352.74
18 1-1/4 1-3/8 2-27/32 2 4-17/32 3-9/32 15-7/8
20-1/8
21 1-3/8 1-1/2 3-5/32 2-1/4 5-1/4 3-5/8 22-3/32

30 1-1/2 1-5/8 3-15/32 2-3/8 5-3/4 3-29/32

40 1-3/4 2 4-1/16 2-29/32 7 4-31/32

55 2 2-1/4 4-19/32 3-9/32 7-3/4 5-7/16

85 2-1/2 2-3/4 5-5/8 4-1/8 10-1/4 7-3/32

120 3 3-1/4 6-3/8 5 12-15/16 7-15/32

150* 3-3/4 3-3/4 8-3/16 5-25/32 15-3/4 9-3/8

175* 4 4-1/4 9-3/8 6-21/32 16-5/32 10-13/16

* = round headed bolt

94

Slings, Turnbuckles,
Ratchet Binders & Dynamometer

www.SuperiorToolRental.com 877-446-4352 95

SLINGS - NYLON/POLYESTER Eye & Eye Slings

Sling to Load HEAVY DUTY (900 WEBBING)
Angle Efficiency
TYPE 3 - FLAT EYE

RATED CAPACITY IN POUNDS

WIDTH ID CODE PLY VERTICAL CHOKER BASKET INSIDE WEIGHT IN LBS.

EYE SIZE 5' base add/ft
LAYING

FLAT

1" 91EE2 2 3200 2600 6400 9" .68 .112
2" 92EE2 2 6400 5100 12800 9" 1.30 .220
3" 93EE2 2 8900 7200 17800 12" 2.16 .350
4" 94EE2 2 11500 9200 23000 12" 2.45 .444
5" 95EE2 2 13600 10900 27200 15" 3.28 .548
6" 96EE2 2 16300 13000 32600 15" 3.78 .662
8" 98EE2 2 22000 17600 44000 18" 5.47 .960
10" 910EE2 2 24000 19200 48000 18" 7.05 1.190
12" 912EE2 2 26900 21500 53800 24" 8.67 1.470

Endless Web Slings

HEAVY DUTY (900 WEBBING)

Sling working load limits whether nylon, wire rope TYPE 5 - ENDLESS
or chain slings are rated with their respective
vertical, choker, and basket capacities. When RATED CAPACITY IN POUNDS
selecting these slings, careful consideration must
be made for the proper sling to load horizontal WIDTH ID CODE PLY VERTICAL CHOKER BASKET WEIGHT IN LBS.
lifting angle. The greater angle to sling configuration
will result in a reduction of sling efficiency and a 5' base add/ft
loss of rated work load limits!
SEE ILLUSTRATION ABOVE:

1" 91EN2 2 6400 5100 12800 1.24 .22
1-3/4" 9175EN2
(A) at a 90º sling to load angle the sling is at 2 10000 8000 20000 1.73 .31
100% of the WLL. 2" 92EN2
3" 93EN2 2 12800 10200 25600 2.60 .44
(B) at a 60º sling to load angle a loss of 14% 4" 94EN2
efficiency occurs and the sling is capable 6" 96EN2 2 17500 14000 35000 4.06 .70
of lifting only 8,600 lbs.
2 23500 18000 47000 5.00 .88
(C) at a 45º sling to load angle a loss of 30%
efficiency occurs and the sling is capable 2 32500 26100 65000 7.50 1.29
of lifting only 7,000 lbs.
Viking ShieldTM
(D) at a 30º sling to load angle the working
load limit is reduced by 50% and the (SEAMLESS)
sling is capable of lifting only 5,000 lbs.

Load Angle Efficiency

Horizontal Efficiency Loss of
Lift Angle Rating Rating

90º 100% 0% ID CODE SLING APPROX. VERTICAL CHOKER BASKET APPROX.
COLOR DIAMETER WEIGHT
80º 98% 2% PER FEET
INCHES
70º 94% 6%

60º 86% 14%

50º 76% 24%

45º 70% 30%

40º 64% 36% VRS1 Purple .60 2600 2080 5200 .20
VRS2 Green .80 5300 4240 10600 .30
30º 50% 50% VRS3 Yellow 1.00 8400 6720 16800 .46
VRS4 1.20 10600 8500 21200 .54
VRS5 Tan 1.30 13200 10560 26400 .78
VRS6 Red 1.40 16800 13440 33600 .87
VRS7 White 1.55 21200 17000 42400 1.12
VRS8 Blue 1.75 25000 20000 50000 1.51
VRS9 Orange 1.95 31000 24800 62000 2.06
Orange

96

SLINGS - NYLON/POLYESTER

VikingTM ! Observe rated capacity.
WARNING!
(SEAMED)
Work load limits will be reduced when less than 90º from
ID CODE SLING APPROX. VERTICAL CHOKER BASKET APPROX. horizontal (See Efficiency Chart) Angles of less than 30º
COLOR DIAMETER WEIGHT are not to be used. Inspect before use. Additional
PER FEET requirements and safe operating practices are outlined in
INCHES current OSHA, Federal Register Part 29, 1910.184 and
ASME B30.9 c-2000. Death or injury can occur from
improper use or maintenance!

VR1 Purple .60 2600 2080 5200 .20
VR2 Green .80 5300 4240 10600 .30
VR3 Yellow 1.00 8400 6720 16800 .46
VR4 1.20 10600 8500 21200 .54
VR5 Tan 1.30 13200 10560 26400 .78
VR6 Red 1.40 16800 13440 33600 .87
VR7 Orange 1.55 21200 17000 42400 1.12
VR8 Blue 1.75 25000 20000 50000 1.51
VR9 Orange 1.95 31000 24800 62000 2.06
VR10 Orange 2.35 40000 32000 80000 2.86
VR11 Orange 3.15 52900 42320 105800 3.59
VR12 Orange 3.95 66100 52880 132200 4.58
VR13 Orange 4.80 90000 72000 180000 6.14
Orange

Eye & Eye Roundslings

RATED CAPACITY IN POUNDS

ID CODE COLOR VERTICAL CHOKER BASKET EYE APPROX. WEIGHT
OF LENGTH PER FOOT

EYES (in.)

VEE1 Purple 2600 2100 5200 10 .26
VEE2 Green 5300 4200 10600 10 .37
VEE3 Yellow 8400 6700 16800 12 .52
VEE4 10600 8500 21200 12 .62
VEE5 Tan 13200 10600 26400 14 .83
VEE6 Red 16800 13400 33600 16 .98
VEE7 Orange 21200 17000 42400 16 1.50
Blue

Rough N’ Tough

RATED CAPACITY IN POUNDS

ID CODE WIDTH VERTICAL CHOKER BASKET EYE WEIGHT IN LBS.
LENGTH 8' base add/ft

(in.)

862RNT 2" 5000 4000 10000 10 1.6 .18
892RNT 2" 7000 6000 14000 10 1.9 .22
864RNT 4" 10000 8000 20000 12 3.2 .36
894RNT 4" 14000 11200 28000 12 3.8 .44

www.SuperiorToolRental.com 877-446-4352 97

SLINGS - WIRE ROPE One Leg Eye & Eye Wire Rope Slings

Sling to Load ROPE EYE TYPE 10 (6x26) TYPE 33 (7x7x19) TYPE 30 (6x26)
Angle Effifiency DIAMETER SIZE
(in.)
(in.) “Tough-Lock™” Mechanical Sling “Cable-Flex™” Mechanical Sling RIggers Hand Splice
(AXB)
* RATED CAPACITY (TONS) * RATED CAPACITY (TONS) * RATED CAPACITY (TONS)

VERTICAL CHOKER BASKET ** VERTICAL CHOKER BASKET ** VERTICAL CHOKER BASKET **

1/4 2x4 .65 .48 1.3 .5 .34 1 .49 .38 .99

3/8 4x8 1.4 1.1 2.9 1.1 .74 2.2 1.1 .85 2.1

1/2 4x8 2.5 1.9 5.1 1.9 1.3 3.7 1.8 1.5 3.7

5/8 5x10 3.9 2.9 7.8 2.8 1.9 5.5 2.8 2.3 5.6

3/4 6x12 5.6 4.1 11 4.1 2.8 8.1 3.9 3.3 7.8

7/8 7x14 7.6 5.6 15 5.4 3.7 11 5.2 4.5 10

1 8x16 9.8 7.2 20 6.9 4.7 14 6.7 5.9 13

1-1/8 9x18 12 9.1 24 8.3 5.8 17 -- -

1-1/4 10x20 15 11 30 9.9 7 20 -- -

1-3/8 11x22 18 13 36 - -- -- -

1-1/2 12x24 21 16 42 - -- -- -

*1 ton = 2000 lbs. ** Ratings based on a minimum D/d ratio of 25 (D =curvature around which the body is bent; d=diameter of wire rope)

Wire Rope/Aircraft Cable*

BREAKING STRENGTHS AND APPROXIMATE WEIGHTS

DIAMETER WIRE ROPE AIRCRAFT AIRCRAFT WEIGHT
(in.) IN LBS PER FOOT
6x25 & 6x37** CABLE* CABLE*

(EIPS) 7x19 7x7 SS A/C
IWRC FC GALV SS GALV IWRC FC
Sling working load limits whether nylon, wire rope
or chain slings are rated with their respective 1/16 - - - - .24 .24 - - .008
vertical, choker, and basket capacities. When
selecting these slings, careful consideration must 3/32 - - - .46 .50 .46 - - .016
be made for the proper sling to load horizontal
lifting angle. The greater angle to sling configuration 1/8 - - 1.00 .88 .85 .88 - - .029
will result in a reduction of sling efficiency and a
loss of rated work load limits! 5/32 - - 1.40 1.20 - 1.20 - - .045
SEE ILLUSTRATION ABOVE:
3/16 - - 2.10 1.85 1.85 - - - .065

7/32 - - 2.80 2.50 - - - - .086

1/4 3.40 3.02 3.50 3.20 3.10 - .12 .11 .110

5/16 5.27 4.69 4.90 4.50 - - .18 .16 .173

3/8 7.55 6.72 7.20 6.00 - - .26 .24 .243

7/16 10.20 9.10 - - - - .35 .32 -

1/2 13.30 11.80 - - - - .46 .42 -

9/16 16.80 14.90 - - - - .59 .53 -

(A) at a 90º sling to load angle the sling is at 5/8 20.60 18.30 - - - - .72 .66 -
100% of the WLL.
3/4 29.40 26.20 - - - - 1.04 .95 -
(B) at a 60º sling to load angle a loss of 14%
efficiency occurs and the sling is capable 7/8 39.80 35.40 - - - - 1.42 1.29 -
of lifting only 8,600 lbs.
1 51.70 46.00 - - - - 1.85 1.68 -
(C) at a 45º sling to load angle a loss of 30%
efficiency occurs and the sling is capable 1-1/8 65.00 57.80 - - - - 2.34 2.13 -
of lifting only 7,000 lbs.
1-1/4 79.90 71.10 - - - - 2.89 2.63 -
(D) at a 30º sling to load angle the working
load limit is reduced by 50% and the 1-3/8 96.00 85.50 - - - - 3.50 3.18 -
sling is capable of lifting only 5,000 lbs.
1-1/2 114.00 101.00 - - - - 4.16 3.78 -

* Not intended for aircraft use. Designed for industrial and marine applications. ** 6x25 and 6x37 breaking strengths are the same.

Load Angle Efficiency ! Observe rated capacity.
WARNING!
Horizontal Efficiency Loss of
Lift Angle Rating Rating Work load limits will be reduced when less than 90º
from horizontal (See Efficiency Chart) Angles of less
90º 100% 0% than 30º are not to be used. Inspect before use.
Additional requirements and safe operating practices
are outlined in current OSHA, Federal Register Part
29, 1910.184 and ASME B30.9 c-2000. Death or
injury can occur from improper use or maintenance!

80º 98% 2%

70º 94% 6%

60º 86% 14%

50º 76% 24%

45º 70% 30%

40º 64% 36%

30º 50% 50%

98

TURNBUCKLES
HG-228 Jaw & Jaw Turnbuckles with Cotter Pin

GREEN PIN® Jaw & Jaw Turnbuckles with Cotter Pin DIMENSIONS (in.)

Working Diameter Take Length Length Length Opening Length Diameter Thickness Diameter Weight ea.
Load Limit Jaw Eye (lbs)
Thread Up Closed Position Open Position Closed Position Jaw Inside Pin Jaw Eye
t i
a b c d ef g h
2.36 1.61 5.9
2.36 3/4 6 14.48 19.17 17.24 .94 1.49 .62 .62 1.61 6.68
2.36 3/4 9 17.40 25.15 20.15 1.61 7.25
2.36 3/4 12 20.39 31.14 20.78 .94 1.49 .62 .62 1.61 8.04
3.27 3/4 18 24.29 43.11 29.13 1.88 10.8
3.27 7/8 12 32.48 25.03 .94 1.49 .62 .62 1.88 13.11
4.54 7/8 18 22 44.52 31.06 2.16 11.48
4.54 1 6 28.03 21.85 21.06 .94 1.49 .62 .62 2.16 15.34
4.54 1 12 17.59 33.81 26.88 2.16 18.51
4.54 1 18 35.35 48.82 32.87 1.06 1.65 .74 .74 2.16 19.62
6.9 1 24 29.52 57.83 38.85 2.67 26.23
6.9 1-1/4 12 35.51 36.06 29.44 1.06 1.65 .74 .74 2.67 29.98
6.9 1-1/4 18 25.23 47.95 35.43 2.67 31.3
9.71 1-1/4 24 31.22 60.55 42.08 1.18 1.96 .86 .78 3.14 37.25
9.71 1-1/2 12 37.83 37.04 31.73 3.14 42.55
9.71 1-1/2 18 26.57 48.97 37.63 1.18 1.96 .86 .78 3.14 45.63
12.7 1-1/2 24 32.48 61.02 43.74 3.54 55.11
12.7 1-3/4 18 38.58 51.57 43.11 1.18 1.96 .86 .78 3.54 63.27
16.8 1-3/4 24 36.73 63.54 49.05 4.25 100.08
27.2 2 24 42.67 65.82 52.67 1.18 1.96 .86 .78 5.62 194
34 2-1/2 24 45.39 72.04 58.22 6.22 216.05
2-3/4 24 49.37 73.93 61.45 1.73 2.79 1.14 1.02
51.37
1.73 2.79 1.14 1.02

1.73 2.79 1.14 1.02

2.04 2.79 1.37 1.1

2.04 2.79 1.37 1.1

2.04 2.79 1.37 1.1

2.32 3.38 1.65 1.29

2.32 3.38 1.65 1.29

2.48 3.66 2 1.61

2.95 4.48 2.24 1.61

3.54 4.33 2.75 1.61

TURNBUCKLES

Green Pin® Eye & Eye Turnbuckles

Green Pin® Eye & Eye Turnbuckles DIMENSIONS (in.)

Working Diameter Take Length Length Length Diameter Width Length Length Weight
Load Limit Thread Inside Inside Closed Position Ea. (lbs)
Up Closed Position Open
t a ef gh 1.03
.54 3/8 b cd .39 .51 1.14 1.92 1.85
1/2 .47 .7 1.41 2.28 2.31
1 1/2 6 11.49 16.85 7.2 .47 .7 1.41 2.24 2.77
1 1/2 .47 .7 1.41 2.24 2.97
1 5/8 6 12.79 17.91 7.59 .55 .82 1.73 3.11 3.52
1.59 5/8 .55 .82 1.73 3.07 4.23
1.59 5/8 9 15.74 23.89 10.59 .55 .82 1.73 3.07 4.47
1.59 3/4 .66 .98 2.12 3.54 5.48
2.36 3/4 12 18.74 29.92 13.62 .66 .98 2.12 3.5 5.84
2.36 3/4 .66 .98 2.12 3.5 6.74
2.36 3/4 6 15 19.8 7.99 .66 .98 2.12 3.5 8.77
2.36 7/8 .78 1.25 2.4 3.93 11.28
2.27 7/8 9 17.91 25.78 10.98 .78 1.25 2.4 3.97 9.59
3.27 1 .94 1.41 2.95 4.64 13.05
4.54 1 12 20.91 31.81 14.01 .94 1.41 2.95 4.6 15.8
4.54 1 .94 1.41 2.95 4.6 16.57
4.54 1 6 16.29 20.94 8.38 .94 1.41 2.95 4.56 21.6
4.54 1-1/4 1.18 1.81 3.54 5.7 24.93
6.9 1-1/4 9 19.21 26.92 11.37 1.18 1.81 3.54 5.66 26.67
6.9 1-1/4 1.18 1.81 3.54 5.66 31.3
6.9 1-1/2 12 22.2 32.95 14.4 1.25 2.12 4.13 6.14 36.37
9.71 1-1/2 1.25 2.12 4.13 6.29 37.69
9.71 1-1/2 18 28.22 44.96 20.39 1.25 2.12 4.13 6.22 50.92
9.71 1-3/4 1.49 2.36 4.68 7.75 57.98
12.7 1-3/4 12 23.66 34.21 14.8 1.49 2.36 4.68 7.71 89.72
12.7 2 1.81 2.71 5.78 9.09 141.09
16.8 2-1/2 18 29.68 46.22 20.78 2 3.14 6.49 10.78 194
27.2 2-3/4 2.24 3.3
34 6 19.56 23.77 9.17 7 12.24

12 25.47 35.78 15.19

18 31.41 47.79 21.18

24 37.4 59.72 27.16

12 27.99 38.74 15.15

18 33.89 50.62 21.14

24 39.92 62.59 27.12

12 29.76 40.27 15.78

18 36.06 52.55 21.77

24 41.92 64.37 27.75

18 40.11 54.96 22.71

24 46.1 66.96 28.7

24 49.76 70.19 29.37

24 56.25 77.36 31.49

24 59.17 80.23 31.49

www.SuperiorToolRental.com 877-446-4352 99

TURNBUCKLES
Green Pin® Eye & Jaw Turnbuckles with Cotter Pin

GREEN PIN® EYE & JAW TURNBUCKLES WITH COTTER PIN DIMENSIONS (in.)

Working Dia. Take Length Closed Length Open Opening Length Dia. Thickness Dia. Dia. Width Length Length Weight ea.

Load Limit Thread Up Position Position Jaw Inside Jaw Pin Jaw Eye Jaw Eye Jaw Eye Inside Inside Closed (lbs)

ta b c d e f g hi j k l

.54 3/8 6 11.14 16.45 .47 .82 .31 .35 .82 .39 .51 1.49 1.92 1.12

1 1/2 6 12.4 17.51 .62 1.02 .39 .43 1.02 .47 .70 1.41 2.28 1.96

1 1/2 9 15.31 23.5 .62 1.02 .39 .43 1.02 .47 .70 1.41 2.24 2.42

1 1/2 12 18.3 29.48 .62 1.02 .39 .43 1.02 .47 .70 1.41 2.24 2.88

1.59 5/8 6 14.29 19.13 .7 1.25 .51 .55 1.29 .55 .82 1.73 3.11 3.48

1.59 5/8 9 17.24 25.11 .7 1.25 .51 .55 1.29 .55 .82 1.73 3.07 4.05

1.59 5/8 12 20.23 31.10 .7 1.25 .51 .55 1.29 .55 .82 1.73 3.07 4.89

2.36 3/4 6 15.39 20.03 .94 1.49 .62 .62 1.61 .66 .98 2.12 3.54 5.15

2.36 3/4 9 18.3 26.02 .94 1.49 .62 .62 1.61 .66 .98 2.12 3.5 5.99

2.36 3/4 12 21.29 32.04 .94 1.49 .62 .62 1.61 .66 .98 2.12 3.5 6.5

2.36 3/4 18 27.32 44.01 .94 1.49 .62 .62 1.61 .66 .98 2.12 3.5 7.27

3.27 7/8 12 22.83 33.34 1.06 1.65 .74 .74 1.88 .78 1.25 2.40 3.93 9.59

3.27 7/8 18 28.85 45.35 1.06 1.65 .74 .74 1.88 .78 1.25 2.40 3.97 12.03

4.54 1 6 18.58 22.79 1.18 1.96 .86 .78 2.16 .94 1.41 2.95 4.64 10.27

4.54 1 12 24.52 34.8 1.18 1.96 .86 .78 2.16 .94 1.41 2.95 4.6 13.99

4.54 1 18 30.51 46.81 1.18 1.96 .86 .78 2.16 .94 1.41 2.95 4.6 17.59

4.54 1 24 36.45 58.77 1.18 1.96 .86 .78 2.16 .94 1.41 2.95 4.56 18.49

6.9 1-1/4 12 26.61 37.36 1.73 2.79 1.14 1.02 2.67 1.18 1.81 3.54 5.7 24.07

6.9 1-1/4 18 32.75 49.48 1.73 2.79 1.14 1.02 2.67 1.18 1.81 3.54 5.66 24.25

6.9 1-1/4 24 38.89 61.57 1.73 2.79 1.14 1.02 2.67 1.18 1.81 3.54 5.66 28.43

9.71 1-1/2 12 28.18 38.66 2.04 2.79 1.37 1.1 3.14 1.25 2.12 4.13 6.14 28.88

9.71 1-1/2 18 34.29 50.74 2.04 2.79 1.37 1.1 3.14 1.25 2.12 4.13 6.29 32.40

9.71 1-1/2 24 40.23 62.71 2.04 2.79 1.37 1.1 3.14 1.25 2.12 4.13 6.22 39.24

12.7 1-3/4 18 38.58 53.38 2.32 3.38 1.65 1.29 3.54 1.49 2.36 4.68 7.75 49.16

12.7 1-3/4 24 44.52 65.39 2.32 3.38 1.65 1.29 3.54 1.49 2.36 4.68 7.71 60.62

16.8 2 24 47.55 68.03 2.48 3.66 2 1.61 4.25 1.81 2.71 5.78 9.09 94.57

27.2 2-1/2 24 52.79 73.46 2.95 4.48 2.24 1.61 5.62 2 3.14 6.49 10.78 149.91

34 2-3/4 24 55.27 75.7 3.54 4.33 2.75 1.61 6.22 2.24 3.3 7 112.24 200.62

HG-228 Jaw & Jaw Turnbuckles with Cotter Pin

HG-228 JAW & JAW TURNBUCKLES WITH COTTER PIN DIMENSIONS (in.)

Thread Die. HG-228 Working Load Weight A E J KM N BB
& Take Up Stock No. Limit (lbs)* Ea. (lbs) B Closed G Open Closed Open Closed
4.07
† 1/4 x 4 1032493 500 .37 .25 .45 1.66 .64 11.19 7.19 12.18 8.18 4.58
† 5/16 x 4-1/2 1032518 800 9.62 6.10
1032536 1200 .56 .31 .50 2.02 .87 13.07 8.57 14.12 11.50 6.03
† 3/8 x 6 1032554 2200 14.14 9.36
1/2 x 6 1032572 2200 .85 .38 .53 2.11 .85 16.25 10.25 17.50 17.43 12.36
1/2 x 9 1032590 2200 20.43 6.03
1/2 x 12 1032616 3500 1.82 .50 .64 3.22 1.07 18.65 12.65 20.14 15.18 9.39
5/8 x 6 1032634 3500 19.16 12.39
5/8 x 9 1032652 3500 2.29 .50 .64 3.20 1.07 24.94 15.94 26.43 22.16 6.13
5/8 x 12 1032670 5200 17.68 9.59
3/4 x 6 1032698 5200 2.71 .50 .64 3.20 1.07 30.94 18.94 32.43 21.08 12.59
3/4 x 9 1032714 5200 24.08 18.53
3/4 x 12 1032732 5200 3.21 .63 .79 3.90 1.32 19.74 13.74 21.82 30.08 12.16
3/4 x 18 1032750 7200 25.62 18.63
7/8 x 12 1032778 7200 3.95 .63 .79 3.89 1.32 26.08 17.08 28.16 32.09 6.18
7/8 x 18 1032796 10000 21.18 12.18
1x6 1032812 10000 4.58 .63 .79 3.89 1.32 32.08 20.08 34.16 27.18 18.18
1 x 12 1032830 10000 33.18 24.84
1 x 18 1032858 10000 4.80 .75 .97 4.71 1.52 21.09 15.09 23.68 39.78 12.06
1 x 24 1032876 15200 31.58 18.06
1-1/4 x 12 1032894 15200 5.85 .75 .97 4.68 1.52 27.49 18.49 30.08 37.58 24.62
1-1/4 x 18 1032910 15200 44.14 12.32
1-1/4 x 24 1032938 21400 6.72 .75 .97 4.68 1.52 33.49 21.49 36.08 33.68 18.32
1-1/2 x 12 1032956 21400 39.68 24.94
1-1/2 x 18 1032974 21400 8.45 .75 .97 4.71 1.52 45.49 27.49 48.08 46.30 18.37
1-1/2 x 24 1033018 28000 41.16 24.37
1-3/4 x 18 1033036 28000 9.37 .88 1.16 5.50 1.77 34.65 22.65 37.62 47.16 24.48
1-3/4 x 24 1033054 37000 52.72 24.60
2 x 24 1033072 60000 11.8 .88 1.16 5.50 1.77 47.12 29.12 50.09 58.18 24.65
2-1/2 x 24 1033090 75000 61.50
2-3/4 x 24 10.4 1.00 1.34 6.09 2.05 23.82 17.82 27.18

13.8 1.00 1.34 6.09 2.05 35.82 23.82 39.18

17.1 1.00 1.34 6.09 2.05 47.82 29.82 51.18

21.0 1.00 1.34 6.09 2.05 60.42 36.42 63.78

21.9 1.25 1.84 8.09 2.82 39.37 27.37 43.58

25.9 1.25 1.84 8.09 2.82 51.37 33.37 55.58

29.8 1.25 1.84 8.09 2.82 63.93 39.93 68.14

32.6 1.50 2.06 8.93 2.81 40.76 28.76 45.68

38.0 1.50 2.06 8.93 2.81 52.76 34.76 57.68

43.5 1.50 2.06 8.93 2.81 65.38 41.38 70.30

53.5 1.75 2.60 9.36 3.35 53.35 35.35 59.16

61.1 1.75 2.60 9.36 3.35 65.35 41.35 71.16

96.3 2.00 2.62 11.80 3.74 69.64 45.64 76.72

167 2.50 3.06 13.26 4.44 72.97 48.97 82.18

199 2.75 3.69 14.92 4.19 74.75 50.75 85.50

*Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit. † Mechanical Galvanized

100