2018 Superior Tool Rental & Repair Catalog

TURNBUCKLES
HG-226 Eye & Eye Turnbuckles

DIMENSIONS (in.)

Thread Die. & HG-226 Working Load Weight JK M N R S X BB
Take Up Stock No. Limit (lbs)* Each (lbs) A Open Closed Open Closed .81 .34 Closed 4.07
12.38 .95 .44 4.58
† 1/4 x 4 1031252 500 .29 .25 11.94 7.94 14.48 8.38 1.13 .53 1.76 6.10
† 5/16 x 4-1/2 1031270 800 .48 18.24 9.98 1.41 .71 2.20 6.03
1031298 1200 .75 .31 13.92 9.42 20.82 12.24 1.41 .71 2.48 12.36
† 3/8 x 6 1031314 2200 1.72 33.11 14.82 1.80 .88 3.56 6.03
1/2 x 6 1031350 .38 17.56 11.56 22.72 21.11 1.80 .88 3.54 12.39
1/2 x 12 1031378 35.06 16.72 2.09 1.00 4.35 6.13
5/8 x 6 1031412 .50 19.94 13.94 24.50 23.06 2.09 1.00 4.34 12.59
5/8 x 12 1031430 36.90 18.50 2.09 1.00 5.12 18.53
3/4 x 6 1031476 2200 2.63 .50 32.23 20.23 48.90 24.90 2.38 1.25 5.09 12.16
3/4 x 12 1031494 3500 2.75 38.20 30.90 2.38 1.25 5.12 18.63
3/4 x 18 1031519 3500 4.12 .63 21.72 15.72 50.67 26.20 3.00 1.43 5.79 6.18
7/8 x 12 1031537 5200 4.22 28.00 32.67 3.00 1.43 5.79 12.18
7/8 x 18 1031555 .63 34.06 22.06 40.00 22.00 3.00 1.43 6.50 18.18
1x6 1031573 52.00 28.00 3.00 1.43 6.50 24.84
1 x 12 1031591 .75 23.24 17.24 64.60 34.00 3.59 1.82 6.50 12.06
1 x 18 1031617 44.38 40.60 3.59 1.82 6.47 18.06
1 x 24 1031635 5200 6.12 .75 35.64 23.64 56.38 32.38 3.59 1.82 8.49 24.62
1-1/4 x 12 1031653 5200 7.83 68.94 38.38 4.09 2.12 8.49 12.32
1-1/4 x 18 1031671 7200 8.83 .75 47.64 29.64 46.74 44.94 4.09 2.12 8.49 18.32
1-1/4 x 24 1031699 7200 11.5 58.74 34.74 4.09 2.12 9.46 24.94
1-1/2 x 12 1031715 .88 36.70 24.70 71.36 40.74 4.65 2.38 9.46 18.37
1-1/2 x 18 1031733 60.38 47.36 4.65 2.38 9.46 24.37
1-1/2 x 24 1031779 .88 49.17 31.17 72.38 42.38 5.81 2.69 9.97 24.48
1-3/4 x 18 1031797 79.18 48.38 6.49 3.12 9.97 24.60
1-3/4 x 24 1031813 10000 9.62 1.00 26.24 20.24 83.18 55.18 7.00 3.25 13.03 24.65
2 x 24 1031831 10000 13.0 85.84 59.18 13.76
2-1/2 x 24 1031859 10000 16.3 1.00 38.24 26.24 61.84 15.09
2-3/4 x 24 10000 20.2
1.00 50.24 32.24

1.00 62.84 38.84

15200 19.9 1.25 42.14 30.14
15200 23.8
15200 27.8 1.25 54.14 36.14
21400 28.7
1.25 66.70 42.70

1.50 44.24 32.24

21400 34.1 1.50 56.24 38.24
21400 39.6
28000 50.7 1.50 68.86 44.86
28000 58.2
1.75 57.38 39.38

1.75 69.38 45.38

37000 83.5 2.00 75.68 51.68
60000 149
75000 174 2.50 79.18 55.18

2.75 81.34 57.34

*Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit. † Mechanical Galvanized

HG-227 Jaw & Eye Turnbuckles

DIMENSIONS (in.)

Thread Die. & HG-227 Working Load Weight E J KM N X
Take Up Stock No. Limit (lbs)* Each (lbs) A B Closed G Open Closed Open Closed R S Closed BB

† 1/4 x 4 1031877 500 .33 .25 .45 1.66 .64 11.57 7.57 12.28 8.28 .81 .34 1.76 4.07

† 5/16 x 4-1/2 1031895 800 .52 .31 .50 2.02 .87 13.50 9.00 14.30 9.80 .95 .44 2.20 4.58

† 3/8 x 6 1031911 1200 .80 .38 .53 2.11 .85 16.91 10.91 17.87 11.87 1.13 .53 2.48 6.10

1/2 x 6 1031939 2200 1.77 .50 .64 3.22 1.07 19.30 13.30 20.48 14.48 1.41 .71 3.56 6.03

1/2 x 9 1031957 2200 2.25 .50 .64 3.20 1.07 25.59 16.59 26.77 17.77 1.41 .71 3.54 9.36

1/2 x 12 1031975 2200 2.67 .50 .64 3.20 1.07 31.59 19.59 32.77 20.77 1.41 .71 3.54 12.36

5/8 x 6 1031993 3500 2.98 .63 .79 3.90 1.32 20.73 14.73 22.27 16.27 1.80 .88 4.35 6.03

5/8 x 9 1032019 3500 3.72 .63 .79 3.89 1.32 27.07 18.07 28.67 19.61 1.80 .88 4.34 9.39

5/8 x 12 1032037 3500 4.35 .63 .79 3.89 1.32 33.07 21.07 34.61 22.61 1.80 .88 4.34 12.39

3/4 x 6 1032055 5200 4.51 .75 .97 4.71 1.52 22.17 16.17 24.09 18.09 2.09 1.00 5.12 6.13

3/4 x 9 1032073 5200 5.56 .75 .97 4.68 1.52 28.57 19.57 30.49 21.49 2.09 1.00 5.09 9.59

3/4 x 12 1032091 5200 6.42 .75 .97 4.68 1.52 34.57 22.57 36.49 24.49 2.09 1.00 5.09 12.59

3/4 x 18 1032117 5200 8.14 .75 .97 4.71 1.52 46.57 28.57 48.49 30.49 2.09 1.00 5.12 18.53

7/8 x 12 1032135 7200 9.10 .88 1.16 5.50 1.77 35.68 23.68 37.91 25.91 2.38 1.25 5.79 12.16

7/8 x 18 1032153 7200 11.6 .88 1.16 5.50 1.77 48.15 30.15 50.38 32.38 2.38 1.25 5.79 18.63

1x6 1032171 10000 10.0 1.00 1.34 6.09 2.05 25.03 19.03 27.59 21.59 3.00 1.43 6.50 6.18

1 x 12 1032199 10000 13.4 1.00 1.34 6.09 2.05 37.03 25.03 39.59 27.59 3.00 1.43 6.50 12.18

1 x 18 1032215 10000 16.7 1.00 1.34 6.09 2.05 49.03 31.03 51.59 33.59 3.00 1.43 6.50 18.18

1 x 24 1032233 10000 20.6 1.00 1.34 6.09 2.05 61.63 37.63 64.19 40.19 3.00 1.43 6.47 24.84

1-1/4 x 12 1032251 15200 20.9 1.25 1.84 8.09 2.82 40.76 28.76 43.98 31.98 3.59 1.82 8.49 12.06

1-1/4 x 18 1032279 15200 24.8 1.25 1.84 8.09 2.82 52.76 34.76 55.98 37.98 3.59 1.82 8.49 18.06

1-1/4 x 24 1032297 15200 28.8 1.25 1.84 8.09 2.82 65.32 41.32 68.54 44.54 3.59 1.82 8.49 24.62

1-1/2 x 12 1032313 21400 30.6 1.50 2.06 8.93 2.81 42.50 30.50 46.21 34.21 4.09 2.12 9.46 12.32

1-1/2 x 18 1032331 21400 36.0 1.50 2.06 8.93 2.81 54.50 36.50 58.21 40.21 4.09 2.12 9.46 18.32

1-1/2 x 24 1032359 21400 41.5 1.50 2.06 8.93 2.81 67.12 43.12 70.83 46.83 4.09 2.12 9.46 24.94

1-3/4 x 18 1032395 28000 52.1 1.75 2.60 9.36 3.35 55.37 37.37 59.77 41.77 4.65 2.38 9.97 18.37

1-3/4 x 24 1032411 28000 59.7 1.75 2.60 9.36 3.35 67.37 43.37 71.77 47.77 4.65 2.38 9.97 24.37

2 x 24 1032439 37000 89.9 2.00 2.62 11.80 3.74 72.66 48.66 77.95 53.95 5.81 2.69 13.03 24.48

2-1/2 x 24 1032457 60000 158 2.50 3.06 13.26 4.44 76.08 52.08 82.68 58.68 6.49 3.12 13.76 24.60

2-3/4 x 24 1032475 75000 187 2.75 3.69 14.92 4.19 78.05 54.05 85.67 61.67 7.00 3.25 15.09 24.65

*Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit. www.SuperiorToolRental.com 877-446-4352 101
† Mechanical Galvanized

RATCHET BINDERS & DYNAMOMETER 1-3/8"

Ratchet Binders

1-3/4" 2"

DYNAFOR - LLXh

Model LLXh Technical Data

Maximum Capacity 25 Ton
Test Load 50 Ton
Safety Coeifficient Minimum 4
0.2 % according to ISO 376. 69.8ºF
Precision 50 daN
10 daN
Increment 27500 daN
From 300 to 1000 h depending of functions
Dimensions (in.) Max. Display 262.47 (in open field) (I.P. 219.82 = 196.85)
A 14.17 2.4 Ghz
B 10.91 Autonomy 14.55
ØC 2.2 I.P. 65 (option: I.P. 67)
D 5.28 Radio Scope ft. From -4º to 104ºF
E 2.68 0.05% per 50ºF
F 2.28 RF Technology Aluminum

Weight lb.

IP Protection

Usage

Sensitivity to Tº

Sensor Material

102

Bearing Heater

TIH L44 Series Bearing Heater

• Advanced power electronics, with accurate electric current control, help control the temperature
rate increase

• Using just 20 kVA of electric power, the TIH L series can heat large bearings weighing up to 2.600 lb
• Automatic demagnetization reduces the risk of ferrous debris contamination after heating
• Thermal overheating protection reduces the risk of damage to the induction coil and the electronics,

enhancing reliability and safety
• Bearings can be heated vertically or horizontally
• Compact design allows the TIH L44 series to be easily transported by forklift

Technical Data TIH L44
Designation
Max. bearing weight 2.600 lb. (1.200 kg)
Bore diameter range
Operating area (w x h) 5.9" – 31.5" (150-180 mm)
Coil diameter
Standard yokes (included) to suit 16.7" x 19.4" (425 x 492 mm)
bearing minimum bore diameter
Optional yokes to suit bearing 6.9" (175 mm)
minimum bore diameter
5.9" (150 mm)
Max. power consumption
3.9" (100 mm)
Voltage 1
TIH L44/MV: 20–23 kVA
Temperature control
Demagnetisation according to SKF norms TIH L44/LV: 20–24 kVA
Max. heating temperature 2
Dimensions TIH L44/LV

Total weight (incl. yokes) TIH L44/MV

68º to 482ºF (20 to 250ºC)

›2 A/cm

482ºF (250ºC)

w 47.3" x d 23.6" x h 33.5"

w 1,200 x d 600 x h 850 mm

714 lbs. (324 kg)

The SKF m20 concept represents the weight (kg) of the heaviest
SKF spherical roller bearing of series 231 which can be heated
from (20 to 110ºC) 68 to 230ºF in 20 minutes. This defines the
heater’s there is a clear indication of how long it takes to heat a
bearing, rather than just the maximum bearing weight possible.

www.SuperiorToolRental.com 877-446-4352 103

Lever Hoist / Chain Hoist

3/4 Ton 1-1/2 Ton 2-3/4 Ton 3 Ton 6 Ton 9 Ton

The LB Series of lever hoists offer a low headroom,
compact design that is perfect for use in tight quarters.
Regarded as the best lever hoists in the industry, our LB Series is recommended for
use in heavy-duty construction work, mining, manufacturing, shipbuilding and
day-to-day maintenance and repair.

Lever Hoist Dimensions & Specifications

Load Net Shipping Weight
Chain Weight Weight for
Cap Model Headroom C Pull to Lift a b D e f g Diameter at 5 ft. Approx. Add’l
(Tons) No. (in) Load (in) (in) (in) (in) (in) (in) (mm) x Lift (lbs.)
One Foot
3/4 LB008 11.0 (lbs.) Load Chain (lbs.) 13 of Lift
1 LB010 11.8 Strands 13 (lbs.)
13.2 18
1-1/2 LB015 14.8 54 5.7 4.7 9.6 3.8 1.6 0.9 5.6 x 1 13 0.5
2 LB020 26
15.6 72 1.1 13 0.7
2-3/4 LB028 21.3 35
3 LB030 26.8 64 6.3 5.0 3.9 1.6 1.3 7.1 x 1 18 60 1.1
6 LB060 93
9 LB090 59 10.4 1.5
3.2
6.8 5.9 4.0 1.4 8.8 x 1 25 4.7

81 1.8

69 6.3 1.5 10.0 x 1 33

72 7.5 8.5 16.3 4.4 2.3 2.0 10.0 x 2 57

78 12.0 4.1 2.9 10.0 x 3 88

104

LEVER HOISTS - MANUAL 3 Ton

Lever Hoist Dimensions
3/4 - 2-3/4 Ton

6 Ton 9 Ton

Don’t see what you’re looking for, just call us. Maybe it wasn’t featured or it was just recently added.
www.SuperiorToolRental.com 877-446-4352 105

CHAIN HOISTS - MANUAL

Harrington CF hand chain hoists give you a practical alternative 1 Ton 1-1/2 Ton 2 Ton S.S.
thanks to an economical design using fewer parts for trouble-
free service. Outstanding durability is due to a die-cast aluminum
body and high-strength, heat-treated main pinion shaft and load
gear. Pre-lubricated ball bearings, precision machined gears,
and a Weston-style load brake make lifting smooth and easy,
while allowing long service and low maintenance.

CF Hand Chain Hoist Dimensions
LHH Hand Chain Hoist Dimensions

Cap Model Headroom Pull to Lift Overhaul Load Chain Net Weight for
(Tons) No. C Load Ratio Diameter Weight Add’l
(mm) x at 10 ft. One Foot
(in) (lbs.) Load Chain Lift of Lift
Strands (lbs.) (lbs.)

1/2 CF005 12.8 60 19 5.0 x 1 24 1.0
1 CF010 14.6 72 31 6.3 x 1 29 1.2
1-1/2 CF015 17.3 84 41 7.1 x 1 40 1.4

2 S.S. LHH-2B 15 88 75 7.9 x 1 46 1.8

2 CF020 20.1 80 63 6.3 x 2 47 1.8

3 S.S. LHH-3B 17.1 84 95 10 x 1 67 2.1 1/2 - 1-1/2 Ton 2 Ton LHH S.S.

3 CF030 23.2 92 81 7.1 x 2 62 2.1

5 CF050 24.4 92 134 7.1 x 3 82 2.9

CB Hand Chain Hoist Dimensions
& Specifications

10 CB100 29.9 72 396 9.0 x 4 186 5.5
15 CB150 40.2 74 594 9.0 x 6 346 7.9
20 CB200 46.5 72 x 2 396 x 2 9.0 x 8 524 10.9

CF Hand Chain Hoist Dimensions
LHH Hand Chain Hoist Dimensions

Cap Model a b d e f g x
(Tons) No. (in) (in) (ft) (in) (in) (in) (in)

1/2 CF005 5.4 5.9 2.0 2.4 1.1 -
-
1 CF010 5.8 6.9 10 2.3 2.9 1.4 -
1.65 -
1-1/2 CF015 6.0 8.0 2.3 2.3 1.4
1.89 -
2 S.S. LHH-2B 7.25 8.5 8.5 3.5 - 1.7 -
1.8 -
2 CF020 5.8 8.0 10 2.3 2.3 -

3 S.S. LHH-3B 7.80 10 3.75 –

3 CF030 6.0 9.4 10 2.4 2.7

5 CF050 6.0 13.5 2.4 4.5

CB Hand Chain Hoist Dimensions 2.9 11.6
3.1 12.6
10 CB100 7.6 17.2 14.9 4.4 12.1 3.2 13.8
15 CB150 10.6 19.4 15.9 4.7 13.3
20 CB200 14.7 29.4 16.3 7.4 14.7

106

CHAIN HOISTS - MANUAL

2 Ton 3 Ton S.S. 3 Ton 5 Ton 10 Ton

2 - 3 Ton 3 Ton LHH S.S. 5 Ton 10 Ton

15 Ton 20 Ton

www.SuperiorToolRental.com 877-446-4352 107

Refinery or Non-Spark
Air Tools and Accessories

All accessories FOR PURCHASE ONLY

Hacksaw Blades - 8" up to 37" long

Part No. Dimensions Steel and Max. Dia.

Length Teeth/Inch Nonferrous Metal of Cut

Z22-9 HSS 8" 8 Steel/Aluminum 3-1/8"

Z22-10 HSS 8" 16 Steel 3-1/8"

Z22-11 HSS 8" 24 Sheet Metal 3-1/8"

Z22-6 HSS 12" 16 Steel 6-5/8"

Z22-6 HSS-SL* 12" 16 Stainless Steel 6-5/8"

Z22-31 HSS 12" 12 Steel 6-5/8"

Z22-7 HSS 16" 16 Steel 10-5/8"

Z22-29 HSS 16" 8 Steel/Aluminum 10-5/8"

Z22-72 HSS 20" 14 Steel 14-5/8"

Z22-30 HSS 21" 12 Steel 15-5/8"

Z22-30 HSS-SL* 21" 12 Stainless Steel 15-5/8"

Z22-73 HSS 24" 14 Steel 18-1/2"

Z22-74 HSS 24" 8 Steel/Aluminum 18-1/2"

Z22-75 HSS 30" 12 Steel 24-7/8"

Z22-75 HSS-SL* 30" 12 Stainless Steel 24-7/8"

Z22-37 HSS 37" 12 Steel 31-7/8"

108

REFINERY OR NON-SPARK AIR TOOLS AND ACCESSORIES 46 CFM

Reciprocating Saw - Pneumatic
Model No. 5 1217 0020
• Cuts steel pipe and channel 1/2" to 4" dia., plastic pipe to 8" dia.
• Ideal for the toughest use in refineries, chemical plants, gas utilities,

construction, offshore oil, mining, marine and demolition industries
• Can be mounted on a pipe clamp to make 90º cuts
• Accepts universal saw blades or thicker, double-tang heavy-duty saw blades

Portaband Saw - Pneumatic

Model No. 5 6003 0010 4-3/4" OD cutting capacity
• Fast, on-site cutting
• Safer in hazardous atmospheres than electric saws

Pneumatic Portable Band Saws

Model No. Motor Power Blade Speed Capacity Blade Housing Overall Air Weight
and Specs. (RPM) Round Regular Size Length Connection (lbs.)

AirBand 21-1/2" 1/4" NPT 14
(ID)
5 6003 0010 0.7 HP, 90 PSI, Variable 4-3/4" 4-1/2" x 4-3/4" 44-7/8" Aluminum 28-3/4" 28
20 CFM 130-220 x 1/2" 1/2" NPT
(ID)
Deep Throat AirBand

5 6031 0010 1.3 HP, 90 PSI, Variable 7" 7" x 7" 66" x 5/8" Stainless

43 CFM 240-295 Steel

Portable Power Hacksaw 51 CFM Pipe Clamps
Model No. 5 1202 9960
Model No. 5 1212 0050 up to 12-3/4" OD pipe clamp

• Cut pipe up to 24" OD in one pass Model No. 5 1201 9030 39-3/8" chain extension
(allows pipe clamp No. 5 1202 9960
• Chain clamps and profile clamps to fit 24" OD. pipe)

available for accurate 90º Model No. 5 1202 9960-SS Stainless Steel
up to 12-3/4" OD pipe clamp
cutting of pipe and
Model No. 5 1201 9030-SS Stainless Steel
structural steel 39-3/8" chain extension (allows pipe clamp No. 5
1202 9960-SS Stainless Steel to fit 24" OD. pipe)
• Accommodate Hacksaw blade chart
heavy-duty blades on previous page Up to 6" Pipe Diameter
up to 37" long Model No. 5 1207 9910
Power 1.5 HP 6" OD pipe clamp

• Optional saw Throttle Lever
blade guides
to increase Air pressure 90 PSI

Air consumption 51 cfm

Strokes per Min. 100-350

blade stability Blade Stroke 2-3/8"

Hose 1/2" ID

Weight (lbs.) 15.4

Blade Guide (Bow)

Model No. 5 1207 9970
for pipes up to 13" OD
(20" min. blade length required)

Model No. 5 1207 8910
for pipes up to 21" OD

(30" min. blade length required)

Don’t see what you’re looking for, just call us. Maybe it wasn’t featured or it was just recently added.

www.SuperiorToolRental.com 877-446-4352 109

Concrete/Steel Saws

110

CONCRETE/STEEL SAWS

Air Concrete Chain Saw

Cut with ease, speed and portability through Reinforced Concrete, Brick,
Block, Concrete Pipe and Natural Stone. The powerful CS 536163-3 air
saw is designed to cut through walls, floors and columns in a single pass.

FEATURES AirFORCE Premium Chains
• Safety operating trigger prevents accidental starting For concrete cutting with steel reinforcement
• No gas or engine fumes to deal with 20" – Part No. CC 05-5080
• Pays for itself every time you use it with faster
cutting and completion of most jobs in a fraction
of the time other saws would take.

TECHNICAL SPECIFICATIONS

Model No. Power No Load Max. Depth Motor Weight w/ No Load Noise Level
(HP) Speed (RPM) of Cut Specifications*
Bar & Chain Torque (in.-lbs.) at 3 ft.

CS 536163-3 6.5 5700 20" 124 CFM @ 90 PSI (6 bar) 34 104 88 dB

* When operating a compressor with pressure greater than 90 PSI, it is recommended to use a “service” unit with pressure regulator” in-line to prevent
over-speeding the saw.

18" Hand-Held Air-Powered Concrete Saw

Heavy duty pneumatic saws are designed for construction,
industrial and municipal cutting applications. Low maintenance.
No carburetors or fuel lines to maintain. Cut wet or dry.

SAWS INDOORS...OUTDOORS
There are no gas or engine fumes to deal with.

WET SAW CUTTING
A 3/4" water connection port is built in for wet
cutting or dust suppression.

TECHNICAL DATA RPM Max. Depth Max. Blade CFM@ Drive Weight
Saw Type Model No. Power H.P. (No Load) 28 lbs.

3200 of Cut Capacity 100 psi

Hand-held CSH 150 9.5 7" 18" 92 Gearbox

14" Gas Powered Saw

Gas operated 14" Chop Saw is ideal for any outdoor application
when cutting concrete, steel or metal decking, ductile pipe, brick,
block and asphalt. 12" and 14" abrasive and diamond blades are
available to match the material in which you are cutting.

TECHNICAL DATA

Saw Type Model No. Weight Fuel Max. Spindle Arbor Maximum Maximum

Capacity Speed Size Wheel Size Cutting Depth

Hand-held TS 420 21.2 lbs. 24 oz. 5,350 rpm 20 mm 14" 4.9"

Don’t see what you’re looking for, just call us. Maybe it wasn’t featured or it was just recently added.

www.SuperiorToolRental.com 877-446-4352 111

112

www.SuperiorToolRental.com 877-446-4352 113

Air Handling & Accessories

TX-JF20 Jet Fan Venturi Type Air Movers

Why is it called a Jet Fan? Air movers, or air horns, are used wherever there is a need to
This four-bladed vaneaxial fan is called a Jet Fan because a high- disperse fumes, move air into confined spaces, cool men working
velocity jet of compressed air is ejected from the trailing edge of in elevated temperature conditions, or cool machinery or products
the blade. This results in the forward rotation of the fan wheel, just with a blast of directed air. Common applications are found in
like a jet plane is pushed forward by the high-velocity jet of air refineries, chemical plants, utilities and co-generation units, metal
ejected from the rear of the jet engine. fabrication plants, paper and pulp plants, shipyards, the marine
industry and the steel industry.
• Operates on compressed air.
• Use for general ventilation in any location where • Operates on compressed air or steam. • No moving parts.
• Used for venting hazardous areas. • Connection for ground wire.
compressed air is available. • Can be used as a blower or exhauster. • Maintenance is minimal.
• Suited for ventilation of tanks, process vessels, or other
Total Air Flow /Output Air Consumption
confined areas for the removal of hazardous fumes or
contaminated air from welding, sandblasting and other operations. Model No. CFM @60 PSI CFM @80 PSI 60 PSI 80 PSI
• Rated operating pressure 40-110 PSI.
• Design allows for lower RPMs while still moving more air.
• Use as blower or exhauster.
• Heaviest-duty fan in the industry.

Specifications TX3AMS 981 1182 50 CFM 62 CFM

Net Weight 95 LBS TX3AM 1231 1462 45 CFM 62 CFM
Mounting Slot Diameter 1”
Bolt Circle Diameter TX6AM 2885 3347 98 CFM 124 CFM
Inlet 20" *API
Max PSI 3/4" NPT TX8AM 4152 4929 152 CFM 193 CFM
AT 80 PSI Air Usage is 110 PSI
186 CFM TX10AM 6182 7304 209 CFM 274 CFM

Capacity / Output Model No. Overall Diameter Diameter NPT Bolt Circle Base Slot Net
Length of Base Top of horn Size Diameter Diameter Weight
The CFM’s will decrease @ 60 PSI average CFM 7600 TX3AMS
TX3AM 16.75" 7.31" 6.0" 1/2" 6.56" 0.4 5.5 lb.
against static pressure @ 80 PSI average CFM 9100 TX6AM 30.5" 7.31" 7.0" 1/2" 6.56" 0.4 8.5 lb.
TX8AM 44.25" 11.25" 12.5" 1" 10.5" 0.4 22.3 lb.
* FLANGES: Matches 20” American Petroleum Institute tank opening. TX10AM 46.06" 14.37" 14.25" 1" 13.62" 0.5 36.0 lb.
48.0" 17.0" 16.75" 1" 15.5" 1.0 42.1 lb.

COPPUS Portable Ventilators

Rugged, durable design with outstanding performance makes the VANO ideal for
ventilating tanks, process vessels, tank cars, manholes and other confined space areas.
• Accepts ducting on inlet and outlet ends.
• Heavy gauge, powder coated steel and cast aluminum construction
• Spark resistant fan blades.

Performance cfm (m3/hr) Air Flow Through Duct (Straight Runs)

MODEL 250CV: 1 HP, 115 Volt 3,000 cfm Model No. 10 ft. 20 ft. 30 ft. 50 ft.

114 cfm m3/hr cfm m3/hr cfm m3/hr cfm m3/hr

250CV 2940 5098 2620 4452 2480 4214 2300 3908

Air Manifolds, Regulators & Filters

In-Line Regulators 15 Gallon Air Manifold Tank
Oiler / Filter / Regulator / Cage
Specifications

Number of 3/4" Outlets 8

Capacity 15 gal

Working Pressure 200 psi

Test Pressure 300 psi

Inlet Size 2"

Tank Diameter 12"

Width with Fittings 22-1/2"

Height 16-1/2"

Length 44"

Weight 72 lbs HV-15G-8P

30 Gallon Air Manifold Tank

Specifications

3/4" (2)

Outlet Size (Qty) 1" (4)

2" (2)

Capacity 30 gal

Working Pressure 200 psi

Test Pressure 260 psi

Inlet Size 3"

Tank Diameter 16"

Width with Fittings 36"

Height 27"

Length 44"

HV-TWIN-PAK Weight 115 lbs TX-4AMF
TX-5AMF
The HiVis Twin-PAK is an air delivery 60 Gallon Air Manifold Tank
system that allows two operators to run
tools simultaneously from one air supply. SPECIFICATIONS
The portable design delivers clean and
lubricated air in the most confined 3/4" (2)
spaces. The built in S7F filter is unique
because it removes 100% of visible Outlet Size (Qty) 1" (4)
moisture from your air supply and
automatically purges water before tool 2" (2)
operation is affected. The internal oiler
has an 11oz capacity to make this unit Capacity 60 gal
virtually maintenance free. An overflow
safety valve will shut air off to both tools Working Pressure 200 psi
in the event of a hose breaking or being
severed. Test Pressure 260 psi

Inlet Size 3"

Tank Diameter 20"

Width with Fittings 39"

Height 31"

Length 54"

Dimensions Weight 193 lbs

Height 15"
Length 28-1/2"
Depth
Weight 10"
31 lbs

www.SuperiorToolRental.com 877-446-4352 115

MISC. AIR HANDLING & ACCESSORIES

Tanner’s® Compact Dispensers

Dimensions (in.)

Model No. T-90 T-83 T-85 T-87 T-89*

Air Line Size 3/4 1 1 2 2

Overall Height 10-1/4 12 19 19 26-1/2

T-90 Overall Depth 5-1/2 7-1/2 11-1/2 11-1/2 16-1/2

T-83 Weight (lbs.) 7 16 25 25 60

T-85 T-87 Reservoir Capacity (gal.) 0.25 0.5 2 2 5

Air Lines Up to 2" Min. CFM Ratings 3–5 3–5 3–5 27.5 27.5
at 100 PSIG
Big De-Icers in Small Packages.
(7.5 cm2/m3 min.)
These Tanner Dispensers are designed for
Max. CFM Ratings
use in air lines up to two inches and require no electricity. 180 350 350 1120 1120
at 100 PSIG
They are of all-metal construction, adjustable to set the (7.5 cm2/m3 min.)

de-icant feed rate and are fillable under pressure. Initial Purchase
of Tannergas (gal.)
• Engineered for use with air lines up to two inches. 5 5 10 15 30
• Compact design for easy installation.
• Low Maintenance. • Durable, safe & dependable * T-89 Tanner not shown

• Stationary or portable applications. • Equally effective with electric or engine-powered services.

Center Punch Band Clamp Steel 3500 Male Nipple

Part Part Part No. Male Thread Size Hose Size
No. Material No. Material Size Width 1/4"
F3 Galv. Steel FS3 S.S. 13/16" 3/8" 3501 1/8" 1/4"
F4 Galv. Steel FS4 S.S. 1" 5/8" 1/4"
F5 Galv. Steel FS5 S.S. 1-1/4" 5/8" 3502 1/4" 3/8"
F311 Galv. Steel FS311 S.S. 1-3/8" 3/8" 3/8"
F6 Galv. Steel FS6 S.S. 1-1/2" 5/8" 3504 3/8" 3/8"
F7 Galv. Steel FS7 S.S. 1-3/4" 5/8" 1/2"
F8 Galv. Steel FS8 S.S. 2" 5/8" 3505 1/4" 1/2"
F9 Galv. Steel FS9 S.S. 2-1/4" 5/8" 1/2"
F10 Galv. Steel FS10 S.S. 2-1/2" 5/8" 3506 3/8" 1/2"
F11 Galv. Steel FS11 S.S. 2-3/4" 5/8" 3/4"
F12 Galv. Steel FS12 S.S. 3" 5/8" 3508 1/2" 3/4"
F14 Galv. Steel FS14 S.S. 3-1/2" 5/8" 3/4"
F16 Galv. Steel FS16 S.S. 4" 5/8" 3509 1/4" 1"
F18 Galv. Steel FS18 S.S. 2-1/2" 5/8" 1"
F20 Galv. Steel FS20 S.S. 5" 5/8" 3510 3/8"
F24 Galv. Steel FS24 S.S. 6" 5/8" Hose Size
F28 Galv. Steel FS28 S.S. 7" 5/8" 3511 3/4" 1/4"
F32 Galv. Steel FS32 S.S. 8" 5/8" 3/8"
3512 1/2" 3/8"
1/2"
3513 1/2" 1/2"
3/4"
3514 3/4"
Hose Size
3515 1"
3/8"
3516 3/4" 1/2"
5/8"
3518 1" 3/4"

Air King Female NPT End Steel 3500 Female Nipple Hose Size

Part No. Material Size Part No. Female Thread Size 1/2"
1/4"
AMC1 Iron 3/8" 3542 1/4" 1/2"
1/2"
AMC Iron 3/4" 3545 1/4"
1"
AM3 Iron 3546 3/8"
Size 3550 3/8"
AM8 Iron 1/4"
3/8"
AM13 Iron 1/2" 3552 1/2"
3/4"
Air King Male NPT End 1" 3554 3/4"

Part No. Material Size Spray Hose Male Coupling
3/8" ( Garden Hose Fitting )
AMB1 Iron 1/2"
5/8" Part No.
AMB Iron 3/4" Male
1" SS317 Thread Size
AM2 Iron SS417 3/4" GHT
SS517 3/4" GHT
AM7 Iron SS617 3/4" GHT
3/4" GHT
AM12 Iron

Air King Hose End

Part No. Material Swivel Hose Male Coupling

AMH Iron Part No. Male
Thread Size
AM1 Iron

AM5 Iron L-3 1/2" NPT

AM6 Iron L-1 7/8"-24

AM11 Iron

116

MISC. AIR HANDLING & ACCESSORIES MADE IN
THE USA

Boss Hose Mender Boss Clamp 4 Bolt 4 Finger

Part No. Material Size Part No. Hose ID Hose OD From Hose OD To
M6 Plated Iron 3/4"
M11 Plated Iron 1" 225 1-1/2" 2-4/64" 2-16/64"
M16 Plated Iron 1-1/4" 275 2" 2-32/64" 2-48/64"
M21 Plated Iron 1-1/2" 375 3" 3-32/64" 3-48/64"
M26 Plated Iron 2"
M31 Plated Iron 2-1/2" Boss Clamp 4 Bolt 2 Finger
M36 Plated Iron 3"
Part No. Material Hose ID Hose OD From Hose OD To

BU29 Zink 2" 2-32/64" 2-50/64"
Plated Iron

Quick Couplers Boss Wing Nut

Part No. Material Size Part No. Material Size
CB Plated Iron 3/8"
VHN600 (V6F6) Male Zinc 3/4" B2 Plated Iron 1/2"
B12 Plated Iron 3/4" and 1"
VHC600 (6VF6) Female Plated Steel 3/4" B17 Plated Iron 1-1/4" and 1-1/2"
B27 Plated Iron 2"
Portable Air Line Lubricators B32 Plated Iron 2-1/2"
B37 Plated Iron 3"
Designed to supply oil to air tools where it is B47 Plated Iron 4"
not practical to use stationary lubricators. B67 Zink Plated Iron 6"

Model Oil Pipe Rec’d Air Max. Length Height Weight Size
1-1/4"
No. Capacity Size Flow@70PSI PSI 1-1/2"

0-R 1.4 oz. 1/2" 30 cfm 500 4-1/4" 2-1/4" 0.88 lbs. Boss Ground Joint Stem 2"
1-R 3.7 oz. 3/4" 70 cfm 260 6" 2-3/4" 1.50 lbs. 2-1/2"
2-R 11.0 oz. 3/4" 70 cfm 300 7" 3-1/2" 2.00 lbs. Part No. Material
2A-R 11.0 oz. 1" 70 cfm 300 7" 3-1/2" 2.00 lbs. GB16 Plated Iron 3"
3-R 16.0 oz. 1" 150 cfm 250 10" 3-3/4" 4.25 lbs. GB21 Plated Iron 4"
GB26 Plated Iron 6"
In-Line Lubricator w/Integral Filter GB31 Plated Iron
GB36 Plated Iron
Model No. Oil Cap. Pipe Size Rec’d Air Flow @ 70 PSI Max. PSI Height GB46 Plated Iron
GB66 Plated Iron

TX-0L-F 1.4 oz. 1/2" 30 cfm 500 2-1/4"

TX-1L-F 3.7 oz. 3/4" 70 cfm 2600 2-3/4" Boss Ground Joint Double Spud

Hoses in Stock, Custom Made Per Request Part No. Material Thread Size Seat
–
Heavy Duty Impact Wrench Hose. GDB23 Plated Iron 1-1/4" and 1-1/2" –
GDB28 Plated Iron 2" –
GDB33 Plated Iron –
GDB38 Plated Iron 2-1/2"
3" Seat
Polymer
Boss Ground Joint Female Spud Polymer
Polymer
Part No. Material Thread Size Polymer
Polymer
Hose I.D. 3/8" 1/2" 3/4" GB18 Plated Iron 1-1/4" Polymer
Working PSI 500 500 500 GB23 Plated Iron 1-1/2" Polymer
Heavy Duty Rivet Buster & Chipping GB28 Plated Iron
Hammer Hose. GB33 Plated Iron 2" Seat
GB38 Plated Iron 2-1/2" Polymer
Hose I.D. 3/8" 1/2" 3/4" GB48 Plated Iron Polymer
Working PSI 500 500 500 3" Polymer
Standard Air Tool Whip Hose. 4" Polymer
Polymer
Hose I.D. 3/8" 1/2" 3/4" GB68 Plated Iron 6"
Working PSI 300 300 300
Boss Ground Joint Male Spud

Part No. Material Thread Size
GM18 Plated Iron 1-1/4"

GM23 Plated Iron 1-1/2"

GM28 Plated Iron 2"
GM33 Plated Iron 2-1/2"
GM38 Plated Iron
3"

Air King 4-Lug Hose End Material Size
Iron 1-1/4"
Part No. Iron 1-1/2"
AM16 Iron
AM21 2"
AM26

www.SuperiorToolRental.com 877-446-4352 117

Pipe Threading Machines

118

#700 POWER DRIVE & ACCESSORIES 12-R

ALL ACCESSORIES FOR PURCHASE ONLY
Die Heads, Manual Threaders North American Standards

Catalog No. Nominal Pipe Size (In.)

Model No. 12-R 1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2

(NPT) National Pipe Taper 37390 37395 37400 37405 37410 37415
37435 37440 37445 37450 37455 37460
Catalog No. 41935 Alloy RH 37375 37380 37385 37480 37485 37490 37495 37500 37505
Model No. 700 37525 37530 37535 37540 37545 37550
Description 115V 50/60 Hz Only High-Speed LH 83460 83465 83470 83475 83480 83485
Pipe Threading Capacity 1/8"-2" 51857 51862 51867 51872 51877 51882
Rod Threading Capacity 1/4"-1" High-Speed RH 37465 37470 37475 92690 92695 92700 92705 92710 92715
Max. Geared Threader Cap. 6
Weight 31 lbs. High-SpeedforStainlessSteelRH 37510 37515 37520 37570 37575 37580 37585 37590 37595

High-Speed for PVC RH 83450 83455

High-SpeedforPlasticCoatedPipe

Alloy for IMC RH

Catalog No. Model No. Accessories (NPSM)

Alloy RH 37555 37560 37565

42600 770 Adapter for 00-R and 00-RB Pipe Dies, 00-R, 11-R, 12-R, 0-R, Ratchet Threaders
42620 774 Square Dr. Adapter -15/16"
42625 775 Support Arm for No.700

10883 418 Oiler w/1 Gal. Nu-Clear
Thread Cutting Oil

Catalog No. Nominal Pipe Size – Threads Per Inch

Die Material or Type 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14 1-11-1/2 1-1/4-111/2 1-1/4-111/4 2 -111/2

(NPT) National Pipe Taper

Alloy RH 37810 37815 37820 37825 37830 37835 37840 37845 37850

High-Speed RH 37855 37860 37865 37870 37875 37880 37885 37890 37895

High-Speed LH 37050 37055 38060 37065 37070 38075 38080 38085

H.S. For Stainless Steel RH 37900 37905 37910 37915 37920 37925 37930 37935 37940

When using the 00-RB die head, H.S. For PVC RH 70685 70690 70695 70700 70705 70710 70715
in the #700 power drive the, #770
adapter must also be used in HS Reversible RH 49707 49712 49717 49722 49727
conjunction.
(NPSM) National Pipe Straight Mechanical

Alloy RH 37945 37950 37955 37960 37965 37970 37975 37980 37985

Die Heads, Manual Threaders, North American Standards 00-RB

Catalog No. Nominal Pipe Size (In.)

Model No. 00-RB 1/4 15/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1
(UNC) 20 TPI 18 TPI 16 TPI 14 TPI 13 TPI 12 TPI 11 TPI 10 TPI 9 TPI 8 TPI
Alloy RH 37610 37615 37620 37625 37630 37635 37640 37645 37650 37655
Alloy LH 37675 37695
(UNF) 28 TPI 24 TPI 24 TPI 20 TPI 20 TPI 18 TPI 18 TPI 16 TPI 14 TPI 14 TPI
Alloy RH 37710 37715 37720 37725 37730 37735 37740 37745 37755
Alloy LH 37775 37780 37785 37790 37795 37800 37805

Bolt Threaders Button Dies, 00-RB Ratchet Bolt Threaders

Die Material or Type Catalog No. Rod Diameter – Threads Per Inch

(UNC) Unified National Course 1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 9/16-12 5/8-11 3/4-10 7/8-9 1-8
Alloy RH 38335 38340 38345 38350 38355 38360 38365 38370 38375 38380
(UNF) Unified National Fine 1/4-28 5/16-24 3/8-24 7/16-20 1/2-20 9/16-18 5/8-18 3/4-16 7/8-14 1-12
Alloy RH 38385 38390 38395 38400 38405 38410 38415 38420 38425 15317

www.SuperiorToolRental.com 877-446-4352 119

#535 THREADING MACHINE & ACCESSORIES

#535 Threading Machine

Capacities
• Pipe: 1/8"- 2" ( 4"- 6" with #141 and #161 geared threaders )
• Bolt: 1/4"- 2"

Features
• Generous top cover for keeping tools and fittings handy
• Speed chuck with rocker-action jaws centers and grips work piece instantly
• Can be used with geared threader Models #141 and #161
• Uses Model 816/817 semiautomatic, Model 815A self-opening, Model 811A

quick-opening die heads

Optional Die Heads

Catalog Model Die Head How Thread Oil Thru Dies Pipe Bolt Used Weight
No. No. Description Opened Direction Head Used Cap. Cap. On lbs.

Machine NPT Die Heads

97065 811A Universal Q.O RH Yes Univ. 1/8"-2" 1/4"-2" * 12-1/2

97075 815A Universal S.O RH Yes Univ. 1/8"-2" 1/4"-2" * 13

84537 816 Universal S.A RH Yes Univ. 1/8"-3/4" * 13

84532 817 Universal S.A RH Yes Univ. 1"-2" * 13
23282 842 Universal Q.O LH Yes Univ. 1/8"-2" * 12-1/2

10491 555 555 Q.O RH Yes Dual/Bolt 1/8"-3/4" *8

Machine Bolt Die Heads

97045 531 Bolt Q.O RH/LH Yes 500B 1/4"-1" * 7-1/2
97050 532 Bolt Q.O RH/LH Yes 500B 1-1/8"-2" * 9

Machine Mono Die Heads

42047 500A Mono Q.O RH Yes Mono 1/8" * 6-3/4"
42052 500A Mono Q.O
42057 500A Mono Q.O RH Yes Mono 1/4" * 7"
42062 500A Mono Q.O
42067 500A Mono Q.O RH Yes Mono 3/8" * 7"
42072 500A Mono Q.O RH Yes Mono 1/2" * 7-1/4"
42077 500A Mono Q.O RH Yes Mono 3/4" * 7-1/4"
42082 500A Mono Q.O
42087 500A Mono Q.O RH Yes Mono 1" * 8"

RH Yes Mono 1-1/4" * 8"

RH Yes Mono 1-1/2" * 8-1/2"

RH Yes Mono 2" * 8-1/2"

S.O - Self-Opening * 535-535A-1822 Machines and 300, 300 Compact and 300-A w/carriage.
Q.O - Quick-Opening
S.A - Semi-Automatic

120

#535 THREADING MACHINE ACCESSORIES

ALL ACCESSORIES FOR PURCHASE ONLY

Pipe Dies for use in Universal Die Heads
(Nos. 504A, 711, 713, 811A, 815A, 816, 817, and 842)

(NPT) (NPSM)

Nominal Pipe Size - Threads Per Inch Nominal Pipe Size - Threads Per Inch
1/8"-27 1/4"-3/8"-18 1/2"-3/4"-14 1"-2"-11-1/2"
Die Material or Type 1/8"-27 1/4"-3/8"-18 1/2"-3/4"-14 1"-2"-11-1/2
Alloy RH 47735
High-Speed RH 47755 47740 47745 47750
High-Speed LH 39587
H.S. For Stainless Steel RH 47775 47760 47765 47770 47845 47850 47855 47860
H.S. For Cast Iron
H.S. For PVC RH 47810 47815 47820
H.S. For Plastic Coated Pipe RH
47780 47785 47790

70740

70745 70750

47785 47790

Pipe Dies for use in 500A Mono Die Heads

Nominal Pipe Size - Threads Per Inch

Die Material or Type 1/8"-27 1/4"-18 3/8"-18 1/2"-14 3/4"-14 1"-11-1/2" 1-1/4"-11-1/2 1-1/2"-11-1/2 2"-11-1/2"
50740
High-Speed RH 50700 50705 50710 50715 50720 50725 50730 50735 50785
H.S. For Stainless Steel RH 50745 50750 50755 50760 50765 50770 50775 50780
(NPSM) 50920
High-Speed RH 50895 50900 50905 50910 50915

Conduit Dies for Universal Die Heads

(ISO) (BEC)

Nominal Conduit Size – Pitch in mm Nominal Conduit Size – Threads Per Inch

Die Material or Type 16-32 mm-1.5 40-63 mm-1.5 1/2"-5/8"-18 3/4"-1-1/4"-16 1-1/2"-2-1/2"-14
Alloy RH
50645 50650 66700 66705 66710

www.SuperiorToolRental.com 877-446-4352 121

#535 THREADING MACHINE ACCESSORIES

ALL ACCESSORIES FOR PURCHASE ONLY

Bolt Dies for Machine Die Heads Bolt Dies for 500B and 531, 532, 541
and 542 Die Heads
Bolt Dies for Universal Die Heads (Nos. 504A,
711, 811A, 816, 817 and 911 Die Heads) (UNC) (UNF)

Rod Size – RH LH Rod Size – RH
TPI High-Speed High-Speed TPI High-Speed
(UNC) (UNF)
1/4"-20 48605 1/4"-28 48690
Rod Size – TPI RH High-Speed Rod Size – TPI RH High-Speed
48295 5/16"-18 48610 48915 5/16"-24 48695
1/4"-20 48215 1/4"-28
48305 3/8"-16 48615 48920 3/8"-24 48700
5/16"-18 48220 48310
48315 7/16"-14 48620 48925 7/16"-20 48705
3/8"-16 48225 3/8"-24 48320
48325 1/2"-13 48625 48930 1/2"-20 48710
48330
7/16"-14 48230 7/16"-20 48335 9/16"-12 48630 48935 9/16"-18 48715
48340
1/2"-13 48235 1/2"-20 48375 5/8"-11 48635 48940 5/8"-18 48720
48345
9/16"-12 48240 9/16"-18 48350 3/4"-10 48640 48945 3/4"-16 48725
48355
5/8"-11 48245 5/8"-18 48360 7/8"-9 48645 48950 7/8"-14 48730

3/4"-10 48250 3/4"-16 1"-8 48650 48955 1"-12 48735

7/8"-9 48255 7/8"-14 1-1/8"-7 48655 48960 1"-14NS 49305

1"-8 48260 1"-14NS * 1-1/4"-7 48660 48965 1-1/8"-12 48740

1-7/8"-7 48265 1"-12 1-3/8"-6 48665 48970 1-1/4"-12 48745

1-1/4"-7 48270 1-1/8"-12 1-1/2"-6 48670 48975 1-3/8"-12

1-3/8"-6 48275 1-1/4"-12 1-3/4"-5 48675 1-1/2"-12 48755

1-1/2"-6 48280 1-3/8"-12 2"-4-1/2 48680 48985

1-3/4"-5 48285 1-1/2"-12 For use with 531, 541 and For use with 532, 542 and
500B 1/4”-1” Die Heads 500B 1-1/8”-2” Die Heads
2"-4-1/2 48290

*NS = Non Standard Dies for Rebar, for use in 500B,
531, 532, and 542 Die Heads
Bolt Dies for 500B, 532 and 542 Die Heads

(8 UN)

Rod Size – TPI RH High-Speed Cat No. Cat No.
1-1/8"-8 49215
1-1/4"-8 49220 (UNC) (UNF)
1-3/8"-8 49225
1-1/2"-8 49230 RH Rebar Size – RH Rebar Size –
1-3/4"-8 49240
1-7/8"-8 49245 High-Speed TPI High-Speed TPI
2"-8 49250
(12UN) 34077 3/8"-16 85850 1"-8
2"-12 49345
34082 1/2"-13 79120 1-1/8"-7

34087 5/8"-11 85855 1-3/8"-6

34092 3/4"-10

Beveling Dies For beveling pipe prior to welding. Set of beveling dies.
Consists of three guide segments and one cutting segment.

Catalog No. Description Pipe Size Used in Die Head
in. in. Universal

52192 37-1/2º Bevel Die Set 1/2-3/4 12-20

50960 37-1/2º Bevel Die Set 1-2 25-50 Universal

52202 45º Bevel Die Set 1/2-3/4 12-20 Universal

52965 45º Bevel Die Set 1-2 25-50 Universal

Cut Grooving Dies For cut groove pipe for mechanical type couplings,
consult chart for sizes and die heads information.

Catalog No. Description Pipe Size Used in Die Head
in. in.

52217 Grooving Die Set 1/2-3/4 12-20 Universal

50985 Grooving Die Set 1-2 25-50 Universal

122

#1224 THREADING MACHINE & ACCESSORIES

#1224 Threading Machine

Capacities
• Pipe: 1/4"- 4" ( 4"- 6" with #141 and #161 Geared Threader )
• Bolt: 1/4"- 2"

Features
• Threads 1/4"-2" pipe at 36 RPM and 2-1/2"- 4" at 12 RPM
• The 1224 threads a wide range of pipe including black, galvanized and

plastic-coated pipe, together with stainless steel, IMC and heavy-wall
conduit, as well as rod up to 30 Rockwell C.
• 1/4"- 2" universal die head; 2-1/2"- 4" receding die head allows cutting of
tapered or straight NPT/NPSM or BSPT/BSPP threads
• Constant and proper lubrication of dies and workpiece with through-head
oiling

Die Heads for Model 1224

Catalog Model Description Capacity
No. No. in.

26132 711 Universal Self-Opening R.H., NPT 1/4-2

26142 713 Universal Quick-Opening L.H., NPT 1/4-2

26152 714 Receding Self-Opening R.H., NPT 2-1/2-4

26162 541 Quick-Opening Bolt L.H./R.H. 1/4-1

26167 542 Quick-Opening Bolt L.H./R.H. 1-1/8-2

55447 725 Cut-Grooving Die Head 2-1/4-4

57497 2-1/2"-3-1/2" Grooving Die Set 2-1/2–3-1/2

57507 2-1/2"-3-1/2" Grooving Bit Only

57492 4" Grooving Die Set 4

57502 4" Grooving Bit Only

55452 766 Blade Type Cutter 3/4–4

58712 Cut-Off Tool Bit

Note: Die Heads do not include dies. All Die Heads are through-head oiling

Accessories for 1224 Pipe Machine

Catalog Model Description
No. No.

26212 764 1/4"-4" Wheel-Type Cutter
26217 744 1/4"-4" Blade-Type Reamer
34577 1/4"-4" Reamer Blade
26187 819 Jaw Insert and Roll Set for PE-Coated Pipe
51005 419 Nipple Chuck 1/2" - 2" NPT
34157 419 Nipple Chuck 2-1/2” NPT
34162 419 Nipple Chuck 3" NPT
34167 840A Nipple Chuck 4" NPT
61122 Universal Drive Shaft
26707 Gear Grease (1224 & 1822)

www.SuperiorToolRental.com 877-446-4352 123

#1224 THREADING MACHINE ACCESSORIES

Pipe Dies for use in UniversaI Die Heads

(Nos. 504A, 711, 713, 811A, 815A, 816, 817, and 842)

Nominal Pipe Size - Threads Per Inch (NPT)

Die Material or Type 1/8"-27 1/4"-3/8"-18 1/2"-3/4"-14 1"-2"-11-1/2

High-Speed RH 47755 47760 47765 47770

H.S. For Stainless Steel RH 47775 47780 47785 47790

Pipe Dies 2-1/2"- 4" for 1224 Pipe Machine

Catalog Description Capacity in.
No.

26192 1224 H.S. Dies NPT 2-1/2"- 4

31827 1224 H.S. NPT Dies for Plastic-Coated Pipe 2-1/2"- 4

32237 1224 H.S. Dies NPT for PVC 2-1/2"- 4

33057 1224 H.S. Dies NPT for Stainless Steel 2-1/2"- 4

33072 1224 45º Beveling Dies 2-1/2"- 4

33077 1224 37-1/2º Beveling Dies 2-1/2"- 4

44992 1224 Bevel Guide Set 2-1/2"- 4

44997 1224 37-1/2º Bevel Bit Only

45002 1224 45º Bevel Bit Only

Note: NPSM threads are made with NPT dies by adjusting the die head.

124

#300 POWER THREADING MACHINE & ACCESSORIES

300 Power Threading Machine

Specifications
• Capacity–1/8" - 2" Pipe, 2-1/2" - 4" with #141, and 4" - 6" with #161 Geared Threaders, 1/4" - 2" Rod.
• Motor – 1/2 HP, universal, reversible motor, single-phase, 50/60 Hz, 115V.
• Switch – Heavy-duty FOR/OFF/REV and Integral Foot Switch.
• Chuck – RIDGID speed chuck with replaceable rocker-action jaws.
• Spindle Speed – 38 RPM (57 RPM available).
• Rear Centering Device – Cam-action turns with chuck.
• Support Bar – Heavy-duty (2).

Catalog Model Description Spindle Speed Pipe Threading Rod Threading Max. Geared Threader Weight

No. No. 300 Power Drive, (rpm) Capacity (in.) Capacity (in.) Threader Capacity (in.) lb.

41855 300 Only 115V 50/60Hz 38 1/8 - 2 1/4 - 2 6 94

300 Accessories

Catalog No. Model No. Description Weight lbs.

10883 418 Oiler with 1 Gallon Premium Thread Cutting Oil 20.5

51005 819 Nipple Chuck Complete,1/2" - 2" NPT 10.5

97065 811A 811A 1/8" - 2" NPT Die Head, Self-Operating, RH 13

97075 815A Oiler with 1 Gallon of Nu-Clear Thread Cutting Oil 13

42360 1206 1206 Stand 31

42365 341 Reamer 6.75

42370 360 Model 360 1/8" - 2" Full Floating, Self Centering Cutter 8.5

42385 312 Carriage Feed Lever 3

42575 32 #32 Transporter (for Power Drives and Tristand Vises) 14.25

46660 E-863 LH/RH Reamer Cone 7

68815 311 Carriage with No. 312 Lever 15

97365 - Jaw Inserts for Coated Pipe 0.5

22638 1452 Clip-On Tool Tray 6

68160 819 Nipple Chuck 1/2" - 2" BSPT 10.5

97070 811A BSPT Die Head Quick-Open R.H. 12.5

97080 815A 815A 1/8" - 2" BSPT Self-Opening Die Head 13

Model 418 Oiler

Specifications Catalog No. Model No. Description Weight lb.
• Chip pan diameter – 14-1/4" 20.5
• Chip pan depth – 8-3/8" 10883 Oiler w/1 Gal.
• Hose length – 55" 418 Premium Thread Cutting Oil
• Capacity – 1 gallon

300 Complete Power Threading Machine

Specifications
• Motor - 1/2 HP, Universal reversible motor, single-phase, 25-60 HZ
• Switch - Heavy-duty FOR/OFF/REV and Integral Foot Switch.
• Chuck - RIDGID speed chuck with replaceable rocker-action jaws.
• Spindle Speed - 38 RPM (57 RPM available).
• Rear Centering Device – Cam-action turns with chuck.
• Support Bar – Heavy-duty (2).

Catalog Model Description Spindle Speed Pipe Threading Rod Threading Max. Geared Threader Weight
No. No.
115V, 25-60 (rpm) Capacity (in.) Capacity (in.) Threader Capacity (in.) lb.

15682 300 Complete Hz (NPT) 38 1/8 - 2 1/4 - 2 6 218

300 Complete Accessories

Catalog No. Model No. Description Weight lbs.

42360 1206 Stand for 300 Power Drive 31

42575 32 Transporter (for Power Drives and Tri-stand Vises) 14-1/4

68815 311 Carriage with No. 312 Lever 15

10883 418 Oiler with 1 Gallon of Nu-Clear Thread Cutting Oil 20-1/2

42365 341 Reamer for N0. 311 Carriage 7

42370 360 Cutter for N0. 311 Carriage 8-1/2

97065 811A Universal Q.O. Die Head Only, Right Hand Only 12-1/2

97075 815A Self Opening Die Head Only, Right Hand Only 13-1/2

51005 819 Nipple Chuck Complete, 1/2" - 2" NPT 10-1/2

22638 1452 Removable Tool Tray 6

46660 E-863 LH/RH Reamer Cone 7

www.SuperiorToolRental.com 877-446-4352 125

ROLL GROOVER & ACCESSORIES Standard Equipment Specifications
• 36642 – Footswitch, ASM. • Capacity
918-I Roll Groover • 48405 – Roll Set for 8"-12" Sch 10
– 1" - 12" Sch 10 Steel
920 Roll Groover (8" Sch 40) With Carry Case. – 1" -8" Sch 40 Steel
• 49217 – Groove Roll 2" - 6". – 2" - 6" Copper (types K, L, M & DWV)
• 51432 – Drive Roll 2" - 6". – 1-1/2", 2-1/2" - 4" Sch 80 PVC
• 59992 – 1" -12" Stabilizer for • Motor – Universal 1/2 HP
• Motor Control – On/Off Heavy-Duty
Grooving Nipples. w/ Foot Switch
• 64192 – Stand, ASM 918-I. • Speed: 45 RPM (No Load)
• 49087 – T-Handle Hex Key, 1/8".
• 54317 – Box Wrench.
• 67192 – Spanner Wrench.
• 67197 – Hex Key 3/8".
• 53987 – Roll Storage Case.

918-I Roll Groover Accessories

Catalog No. Model No. Description Voltage Weight (lb.)
185
64977 918-I Roll Grooving Machine Complete 115

Accessories

Catalog No. Description Weight (lb.
48405 Roll Set for 8"-12" Sch 10 (8" Sch 40) With Carry Case 18
48407 Roll Set for 1-1/4"-1-1/2" Sch10/40 With Carry Case 10
48412 Roll Set for 1" Sch 10/40 and 1-1/4"-1-1/2" Sch 10/40 w/Carry Case 20
48417 Roll Set for 2"-6" Copper 10
59992 Roll Set for 1"-12" Stabilizer for Grooving Nipples 11
76822 Inch Diameter Tape 0.5
76827 Metric Diameter Tape 0.5

Standard Equipment Specifications
• 42575 – #32 Transporter • Capacity

(for Power Drives and – 2"-12" Sch 5, 10, & 40 Steel, Stainless Steel, Aluminum
Tristand Vises). – 14"-16" Sch 5 &10 Steel, Stainless Steel, Aluminum
• 920 Training Video & User Manual. – 18"-24" .250 Wall Steel, Stainless Steel, Aluminum
• 10843 – Set of Rolls 2-6" 920. – 2"-8" Sch 40 PVC
• 10848 – Set of Rolls 8-12" 920. – 2-1/2"-4 Sch 80 PVC
• 10853 – Set of Rolls 14-16" 920. – 2"-8" Copper (K, L, & M)
– 3"-8" Copper (DWV)

920 Roll Groover Accessories

Catalog No. Model No. Description Voltage Weight (lb.)

95782 920 920 Roll Groover with 2"-6" Sch. 115 199

40.8"-12" Sch. 40 and 14"-16" Std.

Accessories

Catalog Model Description Weight
No. No. lb

42575 32 #32 Transporter (for Power Drives and Tristand VIses) 14.25

76822 - Inch Diameter Tape 0.5

76827 - Metric Diameter Tape 0.5

96372 RJ624 RJ624 Large Diameter Pipe Stand 167

96982 - Drive & Groove Roll Set for 2"-8" Copper Tube Type K,L,M, & DMV 20

96987 - Drive & Groove Roll Set for 18"-20" Sch. 10 Steel or Stainless Steel 21

96992 - Drive & Groove Roll Set for 22"-24" Sch. 10 Steel or Stainless Steel 22

96997 - Drive & Groove Roll Set for 4"-6" Sch. 40 Steel or Stainless Steel 20

126

POWER PIPE CUTTER & ACCESSORIES Model 258-XL

Model 258

Specifications 258 Specifications 258-XL

• Cutting Capacity – 2-1/2" to 8" schedule 10*/40 steel pipe • Cutting Capacity – 8" to 12"
• Powered by a model 700 Power Drive (not included) schedule 10*/40 steel pipe
• Power Drive RPM – 26-30 (no load)
• Weight –105 lbs. (excludes Power Drive) • Powered by a model 700 Power Drive
(not included)
Model 258
• Power Drive RPM – 26-30 (no load)
Catalog No. 50767 • Weight –140 lbs. (excludes N0. 700 Power Drive)
Model No. 258
Description Pipe Cutter Model 258-XL
Weight (lb.) 105
Catalog No. 50227
Model No. 258-XL
Description Pipe Cutter
Weight (lb.)
145

Accessories for 258 and 258-XL

Standard Equipment 258 & 258XL Catalog Model Description Weight
No. No. (lb.)
• 42620 – Square Drive Adapter -15/16" 8-1/2" H-D Cutter Wheel Assembly
• 60002 – 2 Ball Transfer Pipe Supports 2-1/2" to 12" 66687 - (includes HD Cutter Wheel, hub w/pins, cover plate) 13
• 66687 – 8-1/2" H-D Cutter Wheel Assembly 8-1/2" H-D Cutter Wheel only
50812 E-258 8-1/2" Thin Wall Cutter Wheel Only (PVC and Steel) 2
(includes HD Cutter Wheel, hub w/pins, 58222 E258-T Transport Cart 2
cover plate) 54397 Ball Transfer Pipe Support 2-1/2" to 12" 24
– Pump, HF32 Hydraulic Foot 60002 - Pipe Roller for Beveling (for Model 258 only) 21
– RAM, Hydraulic 258 61757 258PS 13

-

*Use the thin wall cutter wheel for best results.
Note: Model 258 is not recommended to cut cast iron pipe.
For Optimum wheel life always properly support the work piece with ball transfer pipe supports.

www.SuperiorToolRental.com 877-446-4352 127

ProPress® TOOL

Item #RP 340 Press Tool

• 30% smaller tool increases maneuverability
• 17% lighter tool reduces operator fatigue
• 31% longer service interval (up to 42,000 cycles) maximizes uptime
• More than 400 presses per charge (with advanced lithium 4 battery)
• Ultimate flexibility with the ability to switch between battery and AC power on the same tool

SPECIFICATIONS
• Capacity: 1/2" – 4" (copper and stainless steel), 1/2"–2" (PEX)
• 270º barrel/jaw swivel
• Hydraulic ram output: 7,200 lbs.
• Weight: 8.5 lbs. (w/battery), 9.5 lbs. (w/AC power adapter)
• Operating temperature range: 15ºF to 122ºF
• Approximate cycle time: 4 seconds
• LED-light for continued operations in no or low-light environments
• Longest service interval in the industry: 42,000 cycles
• Compatible with all standard series pressing jaws and attachments from RIDGID®
• For use with copper and stainless steel tubing, steel pipe, PEX and cutting soil pipe
• Battery tool kit includes: RP 340 Press Tool, (2) 18V advanced lithium 2 batteries, 120V

advanced lithium battery charger, and carrying case
• Corded tool kit includes: RP 340 Press Tool, AC power adapter and carrying case

STANDARD PRESS JAWS AND ACCESSORIES

Standard Jaws for ProPress®

For use with standard Series Press Tools (CT400, 320-E, RP 330-B, RP 330-C, RP 340).
• Designed in conjunction with the ProPress System fittings. ensuring total system compatibility.
• Capacity – ProPress (copper) 1/2" - 2"

Catalog No. Description Weight (lbs.)
76652 1/2" Jaw for ProPress 4
76657 1/2" Jaw for ProPress
76662 1" Jaw for ProPress 4-1/4"
76667 1-1/4" Jaw for ProPress 4-1/2"
76672 1-1/2" Jaw for ProPress 4-3/4"
76677 2" Jaw for ProPress 6-1/2"

10"

ProPress XL-C® Rings

For use with ProPress XL-C (copper fittings) and XL-S (stainless steel fittings.)
• Designed in conjunction with the ProPress XL-C fittings, ensuring total system compatibility.
• Capacity – 2-1/2" - 4" copper or stainless steel tubing

Catalog No. Model No. Description Weight (lbs.)

20483 XL-C 2-1/2" to 4" Rings, 40.25
Actuator & Case Complete
20543
20548 XL-C 2-1/2" Press Ring 6"
20553
21878 XL-C 3" Press Ring 9-3/4"
21103
XL-C 4" Press Ring 11-3/4"

V2 V2" Press Ring Actuator 6-3/4"

XL-C XL-C Carrying Case Only 7-3/4"

MegaPress® Jaws and Rings

MegaPress jaws and rings join 1/2" to 2" commercially available black iron pipe schedules 5 through 40 when used with RIDGID®
Standard Press Tools (CT-400, 320-E, RP 330-B, RP 330-C or RP 340)
• Capacity – 1/2" to 2" commercially available black iron pipe

Catalog No. Description
37958 1/2" MegaPress Jaw
37963 3/4" MegaPress Jaw
37968 1" MegaPress Jaw
37973 1-1/4" MegaPress Ring
37978 1-1/2" MegaPress Ring
37983 2" MegaPress Ring
48563 MegaPress Carrying Case

128

TORCH BEVELING MACHINE

Standard Torch Beveling Machine

Every ring gear and saddle are precisely machined and calibrated to ±
.025 in concentricity and ± .015 in squareness. The standard rear-mounted
short saddle aids cutting and beveling in tight locations, while allowing
precise back-beveling operations.

H&M’s unique “split horseshoe” design permits easy placement over pipe
sections. A quick-operating boomer assembly securely locks the machine
to the pipe for an entire 360-degree rotation. No repositioning is ever
needed! H&M’s Cuboid Spacer System keeps the spacers on the
machine to minimize downtime.

H&M Pipe Beveling Machines save weld prep time and money compared
to hand cutting. With easy-to-follow manuals and a few minutes of
instruction, any operator can easily make accurate cuts and bevels.

HOW FAST? For example when using the No. 3 Standard Beveling
Machine, a 20" pipe can be cut and beveled in about four minutes!

Torch Beveling Machine Specifications Storage Box Specifications

Model No. Standard Pipe Sizes Weight (lbs) Box Model No. Part No. Weight (lbs)

No. 0 2", 2.5", 3" and 4" 9.50 0 Storage Box BOX00 7
No. 1 3", 4", 6" and 8" 18 1 Storage Box BOX01 11
No. 2 6", 7", 8" and 12" 27 2 Storage Box BOX02 18
No. 3 12", 14", 16" and 18" 55 3 Storage Box BOX03 32
No. 4 20", 22", 24" and 26" 81 4 Storage Box BOX04 39
No. 30 24", 26", 28" and 30" 92 30 Storage Box BOX30 42
No. 5 30", 32", 34" and 36" 145 5 Storage Box BOX05 73

www.SuperiorToolRental.com 877-446-4352 129

130

Electrical Construction Tools

Greenlee on-site demonstrations and trainings are available.
Contact your sales or rental representative for more information and/or scheduling.

www.SuperiorToolRental.com 877-446-4352 131

ELECTRICAL, UTILITY COMMUNICATIONS & MECHANICAL

Bending

Item #555C Item #28008
555C Series Electric Bender Shoe Guide
Classic Electric Bender for Conduit & Pipe
Rigid/IMC Shoe Group, 1/2" to 2"
VERSATILE
• Bend 1/2" to 2" RIGID/IMC/EMT

on 2 shoes

MOBILE Item #238035
• Lightweight, compact design for
EMT Shoe Group, 1/2" to 2"
easy jobsite portability
• No loose pieces
RELIABLE • One time setup
• Greenlee’s classic “triple-nickel” • Bend 1/2" to 2" on one shoe
• Works with 555C electric conduit benders
electric bender, features simple • Less lifting reduces operator fatigue
relay controls for easy field repairs

Item #854DX

Electric Bender

VERSATILE
• 1 shoe bends 1/2" to 2" EMT, IMC and Rigid conduit
• Simple switching between vertical and horizontal

bending configurations

ACCURATE
• Absolute encoder stops bending at precise angles
• Digital pendant sets angle and monitors process

RELIABLE
• Solid state electronics rated for 1,000,000+ bends
• Solid state system eliminates arcing and prevents damage

from temporary power loss

Item #881-MBT

Mobile Bending Table

EFFICIENT
• Save one hour with every move
• All components pin to the table, reducing component

loss allowing convenient transport from site to site

MOBILE
• Minimize material handling and repetitive lifting with

on-board storage
• Fits through standard height doors 36" wide

ERGONOMIC
• Waist-height bending for operator comfort

FASTER. SAFER. EASIER®.

132

ELECTRICAL, UTILITY COMMUNICATIONS & MECHANICAL

Cable Pulling

Item #G3 Item #G6

G3 Tugger® Cable Puller (G3) Cable Puller: 2,000 lb. G6 Turbo™ (G6) Cable Puller: 6000 lb.

• 3X faster set-up than • Up to 60% Faster compared to competition
competition - no loose pieces • Setup in less than 60 seconds
• No loose pieces, allowing quick
• 20% faster than competition
• 25% stronger than competition changeover for easy transport
• Clamp easily adjusts for different • No adapter needed - easily clamp conduit

sizes of conduit in seconds
• Right angle sheave safely keeps • Dual capstans increase pulling speeds

operators out of direct line of pulls and maximize efficiency
• Portable handle and wheels for • Two speed motor specially designed

increased mobility around jobsites for 6,000 lb loads
• Change tail length, pull direction, • circuit breaker monitor for safe auto

and angle of pull with ease shutoff and extend motor life
• Can hook on the back of a truck hitch • Force indicator prevents damage
• Customized motor with circuit breaker
to puller
specifically designed for cable pulling • Built-in dolly for fast and easy transport
• Ergonomic design eliminates heavy lifting during setup
• Right-angle sheave allows the operator to stand out of

the direct line of force

Available with pulling rope when requested Pulling Rope 1/2" x 600 ft pulling rope Item #456
7/8" x 1200 ft pulling rope Item #34138

Item #6806 Item #6906

Ultra Tugger® 8 (UT8) Cable Puller: 8000 lb. Ultra Tugger® 10 (UT10) Cable Puller: 10,000 lb.

SPEED SPEED
• 8,000 lbs. pulling force to • 2-Speed gear-motor enable 20% faster

handle most pulling jobs. pulling time
• Shift from high-speed/low-load
VERSATILE
• Available with Mobile pulling to low-speed/high-load pulling
with a simple double-tap motion on
VersiBoom for less than the foot-pedal
2 minute, one person
set-up, & 20' tall VERSATILE
• Available with floor mount • Available with Mobile VersiBoom
& chain mount for tighter
spaces for less than 2 minute, one
person set-up, & 20' tall
• Available with floor mount & chain
mount for tighter spaces

HEAVY DUTY
• Customized gear motor

specifically for heavy-duty
cable pulling application
and meet UL & cUL
safety requirements

www.SuperiorToolRental.com 877-446-4352 133

CABLE PULLING - TERMINATION - KNOCKOUT SETS

Smart Pull Specifications

What happens when cable is over stressed during a pull? • Application: Used for measuring pulling force,
• Diminished transmission capabilities distance 5and speed during cable pull
• Potential fire hazard
• Rework and liability for the contractor • Power Supply: Up to 5aH Makita battery
The G-Series Smart pull offers • Pulling Force: Up to 10,000 lbs.
• FASTER: Instant early warning alerts allows contractor to take • Pulling Rope: Up to 7/8" Diameter Double braided rope
• Voltage Rating: 18V
timely action, avoiding rework. • Onboard Memory: 128MB
• SAFER: Reduce liability by recording information with accuracy • Weight:

ensuring a healthy pull and peace of mind for the contractor • 34.2 lbs without Carrying Case
• EASIER: Wirelessly monitor force, speed and distance through • 52.2 lbs with Carrying Case
• Accuracy: +/- 2%
the entire pull • Length: 25.5"
• Height: 9.5"
• Width: 8" (including back knob)

Item #EK6FTLX11 6 Ton Crimper Quad Flip Item #EK12IDLX11 12 Ton Crimper Indent

• Sub Brand: Gator • Sub Brand: Gator
• Type: Dieless style crimper • Type: Dieless style crimper
• Application: 6 Ton crimping • Application: 12 Ton crimping
• Standard: C/US UL Listed • Standard: C/US UL Listed
• Wire Size: 6 AWG - 750 kcmil Cu & AI • Wire Size: 4 AWG - 1000 kcmil Cu,
• Length: 14.875"
• Crimping Force: 12,400 lbs. 6 AWG -1000 kcmil AI
• Crimping Capacity: 750 Kcmil • Length: 16.5"
• Connector Type: Color-coded lugs and splices • Crimping Force: 24,000 lbs.
• Hendle Type: Pistol style with over molded rubber grip • Crimping Capacity: 1000 Kcmil
• Connector Type: Color-coded lugs and splices
Item #ESG50LX11 Cable Cutter • Hendle Type: Pistol style with over molded rubber grip

• Sub Brand: Gator Item #LS100XB 11 Ton INTELLI-Punch with Case
• Type: Gillotine style cutter
• Application: Copper, aluminum • Application: Punch conduit size holes in mild steel, stainless steel,
• Cutting Edge: Hard metal, steel aluminum, fiberglass & plastic
• Cutting Range: 2.000" Diameter
• Capacity: 11 Ton
aluminum or copper cable • Capacity Mild Steel:
• Jaw Size: 1.97"
• Length: 15.75" • 4" conduit up to 10 guage
• Hendle Type: Pistol style with over molded rubber grip • 6" conduit up to 14 guage
• Finish: Chrome • Capacity Stainless Steel:
• 4" conduit up to 10 guage
• Minimum Pilot Hole: 1/2", 7/8", 1-1/8"
• Operation: Single-Trigger
• Operation Type: Battery-Hydraulic
• Conduit & Pipe Size: 1/2", to 6" • Weight: 15.11 lbs.

134

ALL IN-ONE BENDING / THREADING STATION

Workhorse Bending Threading Cart

Description

• Pre-drilled holes for mounting bender, threader, and chain vise
• Pass-through holes for electrical cords
• Document holder
• Pipe supports
• Lockable storage
• Open storage
• Cord wrap
• Fork pockets on 2 sides
• Ergonomic handle height reduces lower back strain

Specifications

• Capacity: 2000 lbs
• Dimensions: 74" L x 32" W x 28.5" H

#555®CX Electric Bender Model #300 Compact Threading Machine

• Decrease down time with solid state SPECIFICATIONS
electronics • Pipe Capacity – 1/8" - 2"
• Bolt Capacity – 1/4" - 2"
• 555®CX is a completely reengineered • Motor Control – Heavy-duty rotary forward/off/reverse and integral foot switch
555®C with a more rugged exterior • Chuck – Hammer-type with replaceable, rocker-action jaw inserts
• Oiling System – Through-the-head, with integral oil reservoir with self-priming,
CAPABILITY
• Bend 1/2" to 2" RIGID/IMC/EMT on constant-flow, gerotor pump

2 shoes Machine NPT Die Heads

Catalog Model Description How Thread Oil Thru Dies Pipe Weight

No. No. Opened Direction Head Used Capacity (lbs.)

42047 500A Mono Q.O RH Yes Mono 1/8" 6.75

42052 500A Mono Q.O RH Yes Mono 1/6" 7

42057 500A Mono Q.O RH Yes Mono 3/8" 7

42062 500A Mono Q.O RH Yes Mono 1/2" 7.25

42067 500A Mono Q.O RH Yes Mono 3/4" 7.25

42072 500A Mono Q.O RH Yes Mono 1" 8

42077 500A Mono Q.O RH Yes Mono 1-1/4" 8

42082 500A Mono Q.O RH Yes Mono 1-1/2" 8.5

42087 500A Mono Q.O RH Yes Mono 2" 8.5

Die Heads Description Weight
(lbs)
Catalog Model 1/8" - 3/4" semi-Automatic Die Head 13
No. No. Bolt Die Head Quick-Open R.H./L.H. 1/4" -1" 7.5
Bolt Die Head Quick-Open R.H./L.H. 1-1/8" -2" 9
84537 816 NPT Die Head Quick-Open R.H. 13
97045 531 815A 1/8" - 2" NPT Die Head, Self-Opening, RH 13
97050 532 1/2" - 2" Semi-Automatic Die Head 13
97065 811A 815A 1/8" - 2" NPT Die Head, Self-Opening, RH 12.5
97075 815A 815A 1/8" - 2" BSPT Self-Opening Die Head 13
84532 817
97070 811A
97080 815A

Accessories Description Weight
(lbs.)
Catalog Model Nipple Chuck Complete, 1/2" - 2" NPT 10.5
No. No. Adapter Bracket for 300 Compact 30
Nipple Chuck 1/2" - 2" BSPT 10.5
51005 819
67662 -
68160 819

www.SuperiorToolRental.com 877-446-4352 135

ROUST-A-BOUT & DUCT HOIST DUCT HOIST 16'

ROUST-A-BOUT
C D #780301 - 15' Top Height

#780303 - 25' Top Height

B
A

Options Options

Tee-Head Extension Bar Lift wider loads with the Cable Stay Brake (#784755) Each mast and carriage can have
Sumner Roust-A-Bout a factory installed, gravity actuated safety brake which holds
• Expands the Roust-A-Bout for handling loads in place in the event the cable should go slack.
Fork Extension (#784695) With the push of a button, forks
bulky loads up to 1,000 lb. may be extended from 23.3" to 29.8". When using the fork
• Takes only minutes to attach or detach extensions the weight capacity reduces to 200 lb as is clearly
marked on the extended forks. A second button returns the
TEE-HEAD EXTENSION BAR extension for storage inside forks.
Pipe Cradle (#783705) Great for air ducts or other HVAC
Model No. 781062 applications. Slides over forks. Packaged two per set.
Tray (#784320) 24 x 28" steel tray slides onto forks.
Description R-250 Tee-HeadExtension Bar

Weight 33 lb.

A 37"

B 73"

C 68" SERIES 2416 CONTRACTOR LIFT DIMENSIONS

DIMENSIONS Height Max. (forks up) 16'-11-3/8"
Height Max. (forks down) 15'-11-5/8"
Model No. 780301 780303 Lift Capacity
Height Stowed 450 lb.
Description R-150 Roust-A-Bout R-250 Roust-A-Bout Length Stowed 62.8"
Length Operating 23"
Weight 15' Top Height 25' Top Height Width Stowed 48"
A Width Operating 26.4"
B 336lb. 493 lb. Winch Cranks per Foot 55.25"
C/D Basic Weight
Base 79" 119" 8
Max Height 243 lb.
20" 30"

12" 17.5"

40" x 40" 60" x 60"

15'-1/2" 25'-3/8"

136

Power Distribution Panels

LISTED

SP-30 – Distribution Panel shown with
SPB-6 Portable Power Distribution Center
and (2) 50PCSPB-6 50' supply cords.

www.SuperiorToolRental.com 877-446-4352 137

POWER DISTRIBUTION PANELS

SP-30, 30 KVA Phase Power Distribution Panel

Features

• Distributes 120 and 208 volt 1-phase power
• Completely portable
• Mounted on a 2-wheel cart for effortless mobility, which includes 2 eyes on the top rear
• Primary voltage is 480/3 phase 100 amp main circuit breaker, which is stepped down with the 30 KVA

transformer
• Secondary power is 120/208 volt 100 amp,which is mounted in a stainless steel, weather-tight

enclosure with a circuit breaker viewing window
• (10) 120 volt – 20 amp G.F.C.I. duplex receptacles are provided on

each side of the unit, for use with power tools and portable lighting.
• (2) 120/208 volt – 50 amp twist-lock receptacles are also included for

use with our SPB-6 in remote areas
• UL listed and NEMA 3R certified

Specifications

(10) 120 volt - 20 amp Hubbell G.F.C.I. duplex receptacles with spring-back
weatherproof covers, all connected to 20 amp G.F.C.I. circuit breakers

(2) 120/208 volt - 50 amp Hubbell twist-lock receptacles with

spring-back weatherproof covers, both are connected to 50 amp

LISTED G.F.C.I. circuit breakers

SP-35, 30 KVA Phase Power Distribution Panel

Features

• Distributes 120 and 208 volt 1-phase power

• Completely portable
• Mounted on a 2-wheel cart for effortless mobility around the job-site, which has 2 lifting eyes on the

top rear
• Primary voltage is 600/3 phase 100 amp main circuit breaker, which is stepped down with the 30 KVA

transformer
• The secondary power is 120/208 volt – 100 amp which is mounted in

stainless steel weather-tight enclosure panel with a circuit breaker
viewing window
• (10) 120 volt – 20 amp G.F.C.I. duplex receptacles are provided on each
side of the unit, for use with power tools and portable lighting
• (2) 120/208 volt – 50 amp twist-lock receptacles are also included for
use with our SPB-6 in remote areas
• UL listed and NEMA 3R certified

Specifications

LISTED (10) 120 volt - 20 amp Hubbell G.F.C.I. duplex receptacles with spring-back weatherproof covers, all connected
to 20 amp G.F.C.I. circuit breakers.

(2) 120/208 volt - 50 amp Hubbell twist-lock receptacles with spring-back weatherproof covers, both
are connected to 50 amp G.F.C.I. circuit breakers.

138

POWER DISTRIBUTION PANELS

SP-45, 45 KVA Power Distribution Panel
Features
• Distributes 120 and 208 volt 1-phase power
• Completely portable
• Mounted on a 2-wheel cart with rear swivel casters for effortless
mobility around the job-site
• Includes 2 lifting eyes on top rear of cart
• Primary voltage is 480/3 phase 100 amp main circuit breaker,
which is stepped down with the 45 KVA transformer
• Secondary power is 120/208 volt – 100 amp power panel
which is mounted in stainless steel weather-tight enclosure
with circuit breaker viewing window
• (10) 120 volt – 20 amp G.F.C.I. duplex receptacles are provided on
each side of the unit,for use of power tools and portable lighting

LISTED • (2) 120/208 volt – 50 amp twist-lock receptacles are also included for use with our SPB-6 in remote areas
• UL listed and NEMA 3R certified

Specifications
(10) 120 volt -20 amp Hubbell G.F.C.I. duplex receptacles with spring back weatherproof covers, all
connected to 20 amp G.F.C.I. circuit breakers
(2) 120/280 volt - 50 amp Hubbell twist-lock receptacles with spring-back weatherproof covers,
both are connected to 50 amp G.F.C.I. circuit breakers

SP-75, 75 KVA Power Distribution Panel
Features
• Distributes 120 and 208 volt 1-phase power
• Portable
• Mounted on 4–wheel cart with 4 lifting brackets, located on each corner
• Primary voltage is 480/3 phase 100 amp main circuit breaker, fed a 75 KVA transformer
• Secondary power is 120/208 volt – 200 amp mounted in stainless steel, weather-tight enclosure
panel with a circuit breaker viewing window
• (4) 120 volt – 20 amp G.F.C.I. duplex receptacles are provided on each side of the unit, for use
power tools and portable lighting
• (6) 120/208 volt – 50 amp twist-lock receptacles are
included for use with our SPB-6 in more remote areas
(50' or 100' span)
• UL listed and NEMA 3R certified

LISTED

Specifications
(4) 120 volt - 20 amp Hubbell G.F.C.I. duplex receptacles with spring-back weatherproof covers,
all connected to 20 amp G.F.C.I. circuit breakers
(6) 120/208 volt - 50 amp Hubbell twist-lock receptacles with spring-back weatherproof
covers, both are connected to 50 amp G.F.C.I. circuit breakers

www.SuperiorToolRental.com 877-446-4352 139

POWER DISTRIBUTION PANELS

SP-45-W, 45 KVA Welder/Power Distribution Panel

Features

• Distributes 120 and 208 volt 1-phase power
• Mounted on a 4-wheel cart with fork pockets and (4) lifting lugs mounted to the top

corners of the cart
• Primary voltage is 480/3 phase 100 amp, with a 60 amp 3 pole breaker to feed a 45 KVA

transformer
• Secondary power is 120/208 volt – 200 amp, mounted in a stainless steel weather-tight

enclosure panel with a circuit breaker viewing window
• (10) 120 volt – 20 amp G.F.C.I. duplex receptacles are

provided on each side of the power unit, for use with
power tools and portable lighting
• (2) 120/208 volt – 50 amp twist-lock receptacles are also
included for use with our SPB-6 in more remote areas
• (8) 480 volt – 60 amp 4-pin receptacles with screw-on
weatherproof covers, each connected to a 2-pole 50 amp
circuit breakers
• UL listed and NEMA 3R certified.

LISTED

Specifications
• (10) 120 volt – 20 amp Hubbell G.F.C.I. duplex receptacles with spring-back weatherproof covers, all

connected to 20 amp G.F.C.I. circuit breakers.

• (2) 120/208 volt – 50 amp Hubbell twist-lock receptacles with spring-back weatherproof covers, both are
connected to 50 amp G.F.C.I. circuit breakers.

• (8) 480 volt – 60 amp 4-pin receptacles with screw-on weatherproof covers, both are connected to 2-pole
60 amp circuit breakers.

SPB-6 “Spider” Portable Power Distribution Center Cable Coiling Machine

LISTED 50' & 100' Portable Power
Distribution Center Power Cord
Features
• Distributes 120 Volt 1-phase power 50PCSPB-6 100PCSPB-6
• The SPB-6 is the most portable power distribution

unit available in the market today
• Can be set on the ground or hung from scaffolding

for use right at the job-site
• Roll cage design for the protection and ease of

hanging the unit
• (1) 120/250 volt – 50 amp feed through receptacle for

providing power to the unit
• (1) 250 volt –30 amp non-G.F.C.I. receptacle
• (6)120 volt - 20 amp G.F.C.I. individually protected

receptacles along with its own breaker panel
• UL listed.

140

POWER DISTRIBUTION / GENERATOR PANELS

SP-480304, 480 Volt, 100 amp Portable Power Distribution Panel

Features
• Distributes 480 volt
• 100 amp primary inlet power with main breaker distributed among (4) 30 amp

4-pin Hubbell receptacles
• Mounted on a mobile 2-wheel cart for job-site transportation
• Stainless steel enclosed breaker panel with 30 amp breakers and a circuit breaker

viewing window
• UL listed and NEMA 3R certified.

LISTED

SP-400-4G, 480 Volt, Portable Generator Distribution Panel

Cam Lock receptacles color coded plug

Features LISTED

• Distributes 400A 277/480V power

• Completely portable

• Mounted on a 2-wheel welded cart with 10" Flat Free Wheels, which includes 2 lifting eyes

• Primary voltage is 277/480 3 Phase Cam Lock Receptacles (Brown, Orange, Yellow, White, and Green). Includes flip covers

• Secondary power is 480V MLO 3 Phase Power. NEMA 3R Enclosure

• (4) 100A 480V Pin/Sleeve Welding Receptacles – HBL4100RS2W

• (4) 100A 3-Pole Breakers 480VAC

Specifications
• (4) 480 volt - 100 amp Hubble Welding Receptacles. HBL4100RS2W weatherproof covers, all connected to 100 amp 3-Pole

480VAC Breakers

www.SuperiorToolRental.com 877-446-4352 141

POWER DISTRIBUTION PANELS

5 Pack Welder & 30 KVA Power Pack SP-30-5W

Features
• Distributes 120 and 208 volt 1-phase power
• Completely portable
• Mounted on a 4-wheel cart with casters and Fork Lift Pockets for

effortless mobility, which includes 4 lifting eyes on all 4 corners
• Primary voltage is 480/3 phase 100 amp main circuit breaker,

which is stepped down with the 30 KVA transformer
• Secondary power is 120/208 volt 100 amp, which is mounted in

a stainless steel, weather-tight enclosure with a circuit breaker
viewing window
• (10) 120 volt – 20 amp duplex receptacles are provided on each
side of the unit, for use with power tools and portable lifting
• (2) 120/208 volt – 50 amp twist-lock receptacles are also included
for use with our SPB-6 in remote areas
• Power center which includes (6) 120 volt– 20 amp
• 20A 1-Pole G.F.C.I. Breakers Individually protect each duplex receptacles
• Unit includes 5 functional XMT 350 Miller Welders for your Remote
Welding Applications
• Includes a Roof with a 20 Degree Pitch for Additional Weather Protection
• UL listed and NEMA 3R certified

Specifications:
(10) 120 volt - 20 amp Hubble duplex receptacles with spring-back
weatherproof covers, all connected to 20 amp G.F.C.I. circuit
breakers(2) 120/208 volt 50 amp Hubble twist-lock
receptacles with spring-back weatherproof
covers, both are connected to 50 amp
G.F.C.I. circuit breakers

SP-30-5W

142

Hydrostatic Test Pumps

Hydrostatic Test Pumps

Hydrostatic Test Pump for testing boilers and pressure
vessels with up to 9700 psi maximum pressure.

Model No. PERFORMANCE DATA Maximum Air Required
Maximum Pressure Volume At 100 CPM Pressure Ratio Maximum CFM Required*
100 PSI
PDQC-10000 9700 PSI 1.00 GPM 97 to 1 56 CFM 100 PSI
HP-30/25 2500 PSI 3.0 GPM – –

* Total required CFM to produce rated at maximum pump pressure.

Middle Weight Hydrostatic Test Pumps

Introducing our newest version, the “Middle Weight” test pump.
Re-designed with your safety in mind, while reducing costly repairs
and extending the life of the pump.

• Safety First - All ports located on the back panel
for safe operation. Also included is a chart
recorder port

• Built-in pressure relief valve to avoid over
pressurizing the system

• Built-in block valve to isolate your test and
extend the pump life

PERFORMANCE DATA

Model No. Maximum Pressure Volume At 100 CPM Pressure Ratio Maximum CFM Required * Maximum Air Required

TPMW-10000 9700 PSI 1.00 GPM 97 to 1 56 CFM 100 PSI

* Total required CFM to produce rated at maximum pump pressure.

www.SuperiorToolRental.com 877-446-4352 143

Magnetic Drill Presses

HMD130 HMD904-NEW

HMD905 HMD914

HMD917 HMD505

144

MAGNETIC DRILL PRESSES

HMD915 HMD933
MAB825 MAB-1300 OUR LARGEST MAGNETIC DRILL PRESS

www.SuperiorToolRental.com 877-446-4352 145

MAGNETIC DRILL PRESSES

Magnet Drill Press SPECIFICATIONS

Model No. Electrical System Motor Diameter Depth of Cutter/Mount Net. Base Magnet 3/8” Plate
HMD130 of Cutter Cutter Weight 1”Plate
HMD904
HMD904-NEW RotaLoc Dead Lift
HMD905 with push & turn 23.8 lb.
HMD914 115V, 50/60 Hz -9A, 8A 7/16" - 1-3/8" 1" 4" W 2165 lb. 1200 lb.
HMD917 1035W (120V) X
HMD505 style shank 9" L Drillpoint Breakaway
MAG28LTX32
HMD915 735 lb. 500 lb.
HMD933
MAB825 Rotabroach® or 3-1/8" W Dead Lift
MAB-1300 Copperhead 27.5 lb. X
115V, 50/60 Hz - 9A, 8A 7/16" - 1-1/2" 2" 3/4" Shank 1750 lb. 1310 lb.
6-9/16" L
1035W (115V) Drillpoint Breakaway

995 lb. 710 lb.

Rotabroach® or 3-1/8" W Dead Lift
Copperhead 27.5 lb. X
115V, 50/60 Hz - 9A, 8A 7/16" - 1-1/2" 2" 3/4" Shank 1750 lb. 1310 lb.
1035W (115V) 6-9/16" L Drillpoint Breakaway

995 lb. 710 lb.

Rotabroach® or Dead Lift
Copperhead
115V, 50/60 Hz - 10A, 9A 7/16" - 1-1/2" 2" 3/4" Shank 3-1/8" W 1750 lb. 1310 lb.
1035W (115V) 35 lb. X
Drillpoint Breakaway
6-9/16" L
995 lb. 710 lb.

11.2A 3" Rotabroach® or 3-1/2" W Dead Lift
115V, 50/60 Hz - 12.2A, (115V) 7/16"- 2-1/16" Copperhead 41 lb. X 2230 lb. 1245 lb.
3/4" Shank
1403W 7-3/4" L Drillpoint Breakaway
12000 Series 3-1/2" W
Copperhead 46 lb. X 1180 lb. 795 lb.
7-3/4" L
or Fusion Dead Lift
3/4" Shank
115V, 50/60 Hz - 13.5A, 12.5A 7/16" - 2-3/8" 3" 2385 lb. 1635 lb.
1553W (115V) Drillpoint Breakaway

1290 lb. 825 lb.

Rotabroach® or Dead Lift
Copperhead 45 lb.
115V, 50/60 Hz - 15A, 20A 7/16" - 2-3/8" 3" 3/4" Shank 4W 2560 lb. 1550 lb.
1725W (110V) X Drillpoint Breakaway

8" L 1080 lb. 820 lb.

Cutter/Mount 2-3/4" W Dead Lift

Battery Battery 7/16" - 1-1/4" 2" Morse Tapper 35 lb. X 2500 lb.

MT2, Weldon 3/4" 7-1/2" L Drillpoint Breakaway

Rotabroach® 5W Dead Lift

120V, 50/60 Hz - 11A, 10A 3/4" - 3-1/16" 3" 42/43,000-Series 69 lb. X 2565 lb. 1080 lb.
1265W (120V) Drillpoint Breakaway
1-1/4" Shank 7" L

1390 lb. 470 lb.

5W Dead Lift
X
12.5A 3" 42/43000 Series 2565 lb. 1080 lb.
115V, 50/60 Hz - 13.5A, (115V) 3/4" - 3-1/16" 1-1/4" Shank 72 lb. 7" L Drillpoint Breakaway

1553W 1390 lb. 470 lb.

4-1/3 W Dead Lift
55 lb. X
110V, 50/60 Hz -8A, 16A 7/16" - 4" 4" 3/4" & 1-1/4" 6600 lb.
1800W (110V)
Shank 8-5/8" L Drillpoint Breakaway

110V, 50/60 Hz -8A, 20A 7/16" - 5-1/8" 4" 1-1/4" Shank 112 lb. 4-3/4 W Dead Lift
2200W (110V) X 23,600 lb.

14" L Drillpoint Breakaway
12,100 lb.

146

ANNULAR CUTTERS

ROTABROACH® “12,000-Series” Annular Cutters ROTABROACH® “42/43,000-Series” Annular Cutters

Cutter Diameter 1" D.O.C. Part No. 3" D.O.C. Cutter Diameter Part No.
(inches) 2" D.O.C. (inches) M2 M2 Tin Coated

Use with Pilot 10531 10532 3/4" WELDON SHANK - 2" DEPTH OF CUT

7/16 12114 12214 – 3/4 42024 22024

1/2 12116 12216 – 13/16 42026 22026

9/16 12118 12218 – 7/8 42028 22028

Use with Pilot 10527 10528 24131 15/16 42030 22030
5/8 12120 12220 –
11/16 12122 12222 – 1 42032 22032
3/4 12124 12224
13/16 12126 12226 3-12224 1-1/16 42034 22034
7/8 12128 12228 3-12226
15/16 12130 12230 3-12228 1-1/8 42036 22036
1 12132 12232 3-12230
1-1/16 12134 12234 3-12232 1-3/16 42038 22038
1-1/8 12136 12236 3-12234
1-3/16 12138 12238 3-12236 1-1/4 42040 22040
1-1/4 12140 12240 3-12238
1-5/16 12142 12242 3-12240 1-5/16 42042 22042
1-3/8 12144 12244 3-12242
1-7/16 12146 12246 3-12244 1-3/8 42044 22044
1-1/2 12148 12248 3-12246
1-9/16 12150 12250 3-12248 1-7/16 42046 22046
1-5/8 12152 12252 3-12250
1-11/16 12154 12254 3-12252 1-1/4" WELDON SHANK - 2" DEPTH OF CUT
1-3/4 12156 12256 3-12254
1-13/16 12158 12258 3-12256 1-1/2 42048 22048
1-7/8 12160 12260 3-12258
1-15/16 12162 12262 3-12260 1-9/16 42050 22050
2 12164 12264 3-12262
2-1/16 12266 3-12264 1-5/8 42052 22052
2-1/8 – 12268 3-12266
2-3/16 – 12270 3-12268 1-11/16 42054 22054
2-1/4 – 12272 3-12270
2-5/16 – 12274 3-12272 1-3/4 42056 22056
2-3/8 – 12276 3-12274
– 3-12276 1-13/16 42058 22058

1-7/8 42060 22060

1-15/1 42062 22062

2 42064 22064

1-1/4" WELDON SHANK - 3" DEPTH OF CUT

PILOTS - “12,000-SERIES” 2-1/16 43066 23066
2-1/8 43068 23068
Part No. Description 2-3/16 43070 23070
2-1/4 43072 23072
10531 1" D.O.C. Pilot ( 7/16" - 9/16" ) 2-5/16 43074 23074
10532 2" D.O.C. Pilot ( 7/16" - 9/16" ) 2-3/8 43076 23076
10527 1" D.O.C. Pilot ( 5/8" - 2" ) 2-7/16 43078 23078
10528 2" D.O.C. Pilot ( 5/8" - 2-3/8" ) 2-1/2 43080 23080
24131 3" D.O.C. Pilot ( 3/4" - 2-3/8" ) 2-9/16 43082 23082
4-10528 4" Pilot for Extended Reach “12.000-Series” 2-5/8 43084 23084
6-10528 6" Pilot for Extended Reach “12.000-Series” 2-11/16 43086 23086
2-3/4 43088 23088
2-13/16 43090 23090
2-7/8 43092 23092
2-15/16 43094 23094
3 43096 23096
3-1/16 43098 23098

For use with Hougen®
HMD915 & HMD933 only

www.SuperiorToolRental.com 877-446-4352 147

ANNULAR CUTTERS

ROTALOC PLUS™Annular Cutters
M2 HSS - 1" D.O.C. - (For HMD150)

Cutter Diameter (in.) Part No.
Use with Pilot 17470

7/16 17214 High Speed Annular Cutters - (w/PIN)
1/2 17216
17/32 17217 Cutter Part No.
9/16 17218
5/8 17220 Diameter (in.) 2" Depth of Cut 3" Depth of Cut Type Shank Size (in.)
11/16 17222
3/4 17224 2-7/16 6-1-278 6-1-378 HSS 3/4
13/16 17226
7/8 17228 2-1/2 6-1-280 6-1-380 HSS 3/4
15/16 17230
1 17232 2-9/16 6-1-282 6-1-382 HSS 3/4
1-1/16 17234
1-1/8 17236 2-5/8 6-1-284 6-1-384 HSS 3/4
1-3/16 17238
1-1/4 17240 2-11/16 6-1-286 6-1-386 HSS 3/4
1-5/16 17242
1-3/8 17244 2-3/4 6-1-288 6-1-388 HSS 3/4

2-13/16 6-1-290 6-1-390 HSS 3/4

2-7/8 6-1-292 6-1-392 HSS 3/4

2-15/16 6-1-294 6-1-394 HSS 3/4

3 6-1-296 6-1-396 HSS 3/4

3-1/16 6-1-298 6-1-398 HSS 1-1/4

3-1/8 6-1-2100 6-1-3100 HSS 1-1/4

3-3/16 6-1-2102 6-1-3102 HSS 1-1/4

ROTALOC PLUS™ PILOTS 3-1/4 6-1-2104 6-1-3104 HSS 1-1/4

3-5/16 6-1-2106 6-1-3106 HSS 1-1/4

3-3/8 6-1-2108 6-1-3108 HSS 1-1/4

3-7/16 6-1-2110 6-1-3110 HSS 1-1/4

3-1/2 6-1-2112 6-1-3112 HSS 1-1/4

3-9/16 6-1-2114 6-1-3114 HSS 1-1/4

Part No. Description 3-5/8 6-1-2116 6-1-3116 HSS 1-1/4
17470 For use with HMD150
3-11/16 6-1-2118 6-1-3118 HSS 1-1/4

3-3/4 6-1-2120 6-1-3120 HSS 1-1/4

3-13/16 6-1-2122 6-1-3122 HSS 1-1/4

EXTENDED REACH CUTTERS 3-7/8 6-1-2124 6-1-3124 HSS 1-1/4

Choose this select series of cutters to give 3-15/16 6-1-2126 6-1-3126 HSS 1-1/4

you extra reach in deep hole drilling applications. 4 6-1-2128 6-1-3128 HSS 1-1/4

4-1/16 9-1-2130 C 9-1-3130 C CARBIDE 1-1/4

Each cutter features the same cutting geometry 4-1/8 9-1-2132 C 9-1-3132 C CARBIDE 1-1/4

and action as the standard depth Rotabroach® 4-3/16 9-1-2134 C 9-1-3134 C CARBIDE 1-1/4

cutters, but in the extended 4" and 6" depth 4-1/4 9-1-2136 C 9-1-3136 C CARBIDE 1-1/4

of cut. Also available with stack-cut geometry, 4-5/16 9-1-2138 C 9-1-3138 C CARBIDE 1-1/4

Made in the USA. 4-3/8 9-1-2140 C 9-1-3140 C CARBIDE 1-1/4

Part No. 4-7/16 9-1-2142 C 9-1-3142 C CARBIDE 1-1/4

Cutter Diameter 4" D.O.C. 6" D.O.C. 4-1/2 9-1-2144 C 9-1-3144 C CARBIDE 1-1/4
(in.)
(102mm) (106mm) 4-9/16 9-1-2146 C 9-1-3146 C CARBIDE 1-1/4

Use with Pilot 4-10528 6-10528 4-5/8 9-1-2148 C 9-1-3148 C CARBIDE 1-1/4

13/16 4-12226 6-12226 4-11/16 9-1-2150 C 9-1-3150 C CARBIDE 1-1/4
15/16 4-12230 6-12230
1-1/16 4-12234 6-12234 4-3/4 9-1-2152 C 9-1-3152 C CARBIDE 1-1/4
1-3/16 4-12238 6-12238
4-13/16 9-1-2154 C 9-1-3154 C CARBIDE 1-1/4

4-7/8 9-1-2156 C 9-1-3156 C CARBIDE 1-1/4

4-15/16 9-1-2158 C 9-1-3158 C CARBIDE 1-1/4

5 9-1-2160 C 9-1-3160 C CARBIDE 1-1/4

5-1/8 9-1-2162 C 9-1-3162 C CARBIDE 1-1/4

148

MAGNETIC DRILL ACCESSORIES

Arbor Extenders Swivel Base Upgrade Kit

Part No. Description Part No. Description
05757 Swivel Base Upgrade Kit -
10100 1" Arbor Extender Assembly 05968 10904/HMD904/HMD925 (115V)
07042 Swivel Base Upgrade Kit for
10200 2" Arbor Extender Assembly 07043 HMD904/HMD925/HMD908/HMD928 - (230V)
Swivel Base Upgrade Kit for HMD914 (115V)
When extended reach is necessary, Hougen® offers 1" (New style housing only)
(25mm) and 2" (50mm) Arbor Extenders with a 1.310" Swivel Base Upgrade Kit for HMD914 (230V)
(33.3mm) outside diameter that fit arbors using (New style housing only)
Rotabroach® “12,000-Series” Cutters. Contact Superior
Tool Rental Service Department for more information.

ROTALOC™ Spindle Adapter Upgrade your current drill to gain the benefits of the swivel
base. Swivel base has 1-3/8" (34.9mm) forward and 1-1/8"
Part No. Description (28.5mm) side to side movement. Upgrade limits your
depth of cut to 1-1/4" (32mm) for 10904, HMD904 &
17680 RotaLoc™ Adapter Assembly HMD925 machines. Upgrade limits your depth of cut to
2-1/4" (57mm) for HMD914 machines.
04778 Replacement Adapter

04780 Replacement Pilot

With the RotaLoc™ Spindle Adapter you can take VAC-PAD™

advantage of the fast change out of RotaLoc™ or Part No. Description
RotaLoc Plus™ Annular Cutters in virtually all Hougen®
05000 Vacuum Base Attachment
Portable Magnetic Drills or any other drill that also accepts
Rotabroach® “12,000-Series” Cutters.

Ratchet Drives Vac-Pad™ use with HMD904 on non-ferrous materials,
diamond plate and materials with surface imperfections
Part No. Description up to 3mm deep. Standard shop air provides 761 lbs.
surface holding power at 85 kpa. Safety switch shuts off
02449 For use with Model HMD904 drill motor if air pressure drops.

24154 For use with Models HMD505 &

HMD508 (requires 1" socket)

With the feed handles removed the Ratchet Drive is easily Spindle Adapters
installed, allowing use of a standard ratchet handle for
drilling in confined areas. Ratchet Drive may be operated Part No. Description
from either side of drill. (Ratchet not included)
01829 HDM904 Chuck Adapter (Old Style Threaded)

02386 HMD915 3/4" Shank Adapter

05536 HMD904 & HMD925 Chuck Adapter (Hex Drive)

PIPE ADAPTER KIT 07339 HMD904 & HMD925 Tapping Adapter (Hex Drive)

Part No. Description 10851 1/2" Shank Adapter

Chain Mount for use with 40040 HMD915 3/4" Weldon Adapter
HMD904, HMD014, HMD505/508
02564 40341 HMD914 Chuck Adapter

10726 Bracket Mount for use with HMD915 Spindle adapters are required for some Hougen®
mag drill accessories.
These kits let you drill pipe and tubing with a minimum 3"
(76mm) diameter and some convex surfaces. Kits quickly Drill Chucks
attach to your Hougen® Magnetic Drill and positive
non-slip positioning assures centered hole location. Part No. Description

“Minimum 3" dia. schedule 160, 10731 1/2" Hougen® Chuck with Key
maximum 12" dia. schedule 160. 10737
10732 (HMD904, HMD914 & HMD925)
DRILL HANDLE 10738 5/8" Hougen® Chuck with Key (HMD914)
1/2" Jacobs® Chuck with Key
Part No. Description
07021 Handle to fit Hougen® Motors (HMD904, HMD914 & HMD925)
5/8" Jacobs® Chuck with Key (HMD914)

Convient handle helps you carry and/or move your drill 07930 Replacement key for 1/2" Chucks
around. Fits HMD115, HMD150, HMD904’s & HMD925’s
07931 Replacement key for 5/8" Chucks

For Models HMD904/HMD925 1/2" Chuck requires 05536
Hex Spindle Adapter (01829 adapter for old style threaded
motor spindles). Model HMD914 requires Spindle Adapter
40341 for either chuck size.

www.SuperiorToolRental.com 877-446-4352 149

MACHINERY ROLLERS

Light Duty Series – Riggers Kits and Sets Capacities: 3 and 8 Tons

Kit / Set Roller Capacity Kit Product Set Product Kit / Set Includes (All Kits include steel cases) Weight
lbs.
Capacity (Tons) (Tons) Number Number Steel Case Kit Box KB-D1: 16" x 12.375" x 4.44" 55
52
3 0.75 KRS-3-4S - (4) 0.75-SP Rollers, (2) 3-KH Handles 55
52
3 0.75 - RS-3-45 (4) 0.75-SP Rollers, (2) 3-KH Handles 85
76
3 0.75 KRS-3-2S/2R - (2) 0.75-SP Rollers, (2) 0.75-RP Rollers, (2) 3-KH Handles 85
76
3 0.75 KRS-3-4S RS-3-2S/2R (2) 0.75-SP Rollers, (2) 0.75-RP Rollers, (2) 3-KH Handles
Weight
8 2 KRS-8-4S - (4) 2-SP Rollers, (2) 8-KH Handles lbs.
203
8 2 - RS-8-4S (4) 2-SP Rollers, (2) 8-KH Handles 156
203
8 2 KRS-8-2S/2R - (2) 2-SP Rollers, (2) 2-RP Rollers, (2) 8-KH Handles 156
215
8 2 - RS-8-2S/2R (2) 2-SP Rollers, (2) 2-RP Rollers, (2) 8-KH Handles 172
215
FT Series – Deluxe Kit Capacites: 15-60 Tons – Complete Set Capacities: 15-200 Tons 172
219
Kit / Set Roller Capacity Kit Product Set Product Kit / Set Includes (All Kits include steel cases) 176
219
Capacity (Tons) (Tons) Number Number Steel Case Kit Box KD-D2: 27.75" x 14.75" x 9.63" 176
255
15 3.75 KRS-15-SLP - (4) 3.75-SLP Rollers, (2) KDH48F Handles 212
259
15 3.75 - RS-15-SLP (4) 3.75-SLP Rollers, (2) H36F 36" Handles 216
542
15 3.75 KRS-15-SLD - (4) 3.75-SLD Rollers, (4) P-1 Preload Pads, (2) KDH48F Handles 540
834
15 3.75 - RS-15-SLD 4) 3.75-SLD Rollers, (4) P-1 Preload Pads, (2) H36F 36" Handles 848

30 7.5 KRS-30-SLP - (4) 7.5-SLP Rollers, (2) KDH48F Handles

30 7.5 - RS-30-SLP (4) 7.5-SLP Rollers, (2) H48F 48" Handles

30 7.5 KRS-30-SLD - (4) 7.5-SLD Rollers, (4) P-1 Preload Pads, (2) KDH48F Handles

30 7.5 - RS-30-SLD (4) 7.5-SLD Rollers, (4) P-1 Preload Pads, (2) H48F 48" Handles

40 10 KRS-40-SLP - (4) 10-SLP Rollers, (2) KDH48F Kit Size Handles

40 10 - RS-40-SLP (4) 10-SLP Rollers, (2) H48F 48" Handles

40 10 KRS-40-SLD - (4) 10-SLD Rollers, (4) P-1 Preload Pads, (2) KDH48F Handles

40 10 - RS-40-SLD (4) 10-SLD Rollers, (4) P-1 Preload Pads, (2) H48F 48" Handles

60 15 KRS-60-SLP - (4) 15-SLP Rollers, (2) KDH48F Kit Size Handles

60 15 - RS-60-SLP (4) 15-SLP Rollers, (2) H48F 48" Handles

60 15 KRS-60-SLD - (4) 15-SLD Rollers, (4) P-1 Preload Pads, (2) KDH48F Handles

60 15 - RS-60-SLD (4) 15-SLD Rollers, (4) P-1 Preload Pads, (2) H48F 48" Handles

120 30 KRS-60-SLP RS-120-SLP (4) 30-SLP Rollers, (2) H60F 60" Handles

120 30 - RS-120-SLD (4) 30-SLD Rollers, (2) P-2 Preload Pads, (2) H60F 60" Handles

200 50 KRS-60-SLD RS-200-SLP (4) 50-SLP Rollers, (2) H60F 60" Handles

200 50 - RS-200-SLD (4) 50-SLD Rollers, (4) P-2 Preload Pads, (2) H60F 60" Handles

150