All prices shown are RRP inc. GST. Kits & Toys 199
Audio
Classic-D Amp Module Kit Kemo® Amplifier Modules
(SC November ’12) Class-D amps These German designed pre-built amplifier modules are a quick cost effective solution
are commonplace amongst consumer for custom audio projects. All you need to do is connect a power supply, speaker and
equipment, yet have been hard to re- an input. Each module is encapsulated in epoxy resin, offering excellent durability
produce reliably in kit form, until now! and reliability.
This rugged and reliable Class-D audio
amplifier produces up to 250W into Kemo® 3.5W Mono Amplifier Module
4 . Its high efficiency, high power de-
sign is ideal for building into a larger Includes heatsink Power: 3.5W Max
audio amplifier design. Low distortion dc volts: 4.5 - 12V
<0.01%. Based on the IRS2092 audio Impedance: 4 - 16
amplifier chip. Frequency response: 40Hz - 20KHz
Input sensitivity:
SPECIFICATIONS Up to 150W into 8 and 250W into 4 Connections: <80mV
Power output: Typically 90% at full power for 8 and 83% for 4 Dimensions: 60mm flying leads
Efficiency: 40W x 40D x 12Hmm
Signal to noise ratio: 103dB
Total harmonic distortion: Typically <0.01% Price Each RRP 4+ 10+
Frequency response: A 0700
Power requirements: 10Hz-20kHz 22.00 21.00 20.00
±40-60V dc, 50-55V nominal
Kemo® 12W Mono Amplifier Module
Price Each RRP 4+ Power: 12W Max
dc volts: 6 - 16V
K 5181 69.95 62.95 Impedance: 4 - 16
M 5535 Transformer to suit 86.95 72.00 Frequency response:
K 5182 Speaker protection module kit 19.95 17.95 Input sensitivity: 40Hz - 20KHz
Connections: <80mV
20 Watt Amp Module Kit Dimensions:
60mm flying leads
(SC Dec ’04) If you are looking for a 62W x 36D x 23Hmm
low cost audio amplifier module that
is easy to assemble then you can't go Price Each RRP 4+ 10+
past this kit. It utilises the National A 0702
Semiconductor LM1875T single chip 29.95 28.50 27.00
audio amplifier IC which is capable of
delivering 20W RMS into 8 ohms and Kemo® 40W Mono Amplifier Module
25W into 4 ohms. Includes heatsink.
Power supply not included. Power: 40W Max
SPECIFICATIONS dc volts: 6 - 16V
Power supply rails:
Power rating: Impedance: 4-8
Signal to noise ratio:
Total harmonic distortion: Frequency response: 20Hz - 20kHz Kits & Toys
Frequency range:
Includes heatsink Input sensitivity: <500mV
Price Each
K 5116 Connections: 60mm flying leads
K 5117 Power Supply to suit
M 5118 Transformer to suit Dimensions: 70W x 45D x 29Hmm
20V to 50V dc or ±10V to ±25V Must be bolted to a suitable heatsink.
4W into 8 ohms 20V, 20W into 8 50 V
Price Each RRP 4+ 10+
110dB A 0705
0.025% (1kHz at 20W) 54.95 50.50 44.50
14Hz to 100kHz (1W RMS)
8
RRP 5+ Kemo® Pre-Amplifier Module
29.95 26.50 Operating voltage: 9-24V dc
14.95 13.75 Frequency range: 20Hz to 20kHz
42.00 Input voltage:
Output voltage: 2-50mV
Ultra LD Mk.3 135W Class AB Audio Amplifier Kit Input impedance: 0.2-5V
Output impedance: 50k
Amplifications: < 1k
Dimensions: 40dB
30W x 25D x 15Hmm
Price Each RRP 4+ 10+
A 0708
24.95 22.50 19.95
Kemo® 12W ‘Plug And Play’ Mono Amplifier Module
Fitted with RCA input, dc jack and volume control.
Power: 12W Max
dc volts: 6 - 16V
Impedance: 4 - 16
(SC July ‘11) An improved version of the K 5151 Mk. 2 edition. It features less than Frequency response: 40Hz - 20kHz
half as much distortion at frequencies of 2kHz or above. It also boasts much im-
proved thermal stability & flatter frequency response. Produces incredibly low levels Input sensitivity: <80mV
of distortion even at high power outputs. The class AB design runs much cooler than
genuine class A amplifiers, yet performance has not been sacrificed. It produces Speaker connection: 280mm Flying lead
135W into 8 or 200W into 4 with distortion levels around 0.006%. Heatsink is not
supplied. We suggest the H 0545 diecast heatsink for a professional finish when Dimensions: 72W x 50D x 42Hmm
mounted in a case.
Price Each RRP 4+ 10+
A 0720
49.95 47.50 45.00
Kemo® 3W Stereo Amplifier Module
SPECIFICATIONS 123dB (un-weighted) Distortion: < 0.004% from 20Hz to 20kHz. Power: 2 x 1.5W Max
SNR: 135W RMS into 8 0.0006% typical dc volts: 3 - 10V
Power: Impedance: 8 - 32
Freq. response:+0, -0.3 (8 ), 10Hz - 20kHz Frequency response:
Input sensitivity: 20Hz - 20kHz
Price Each RRP 4+ Speaker connection: <100mV
Dimensions:
K 5154 85.00 80.00 60mm Flying lead
31.45 60W x 44D x 20Hmm
K 5153 Power supply module to suit 34.95 79.95
MC5540 Transformer to suit (1 per channel) 99.95 Price Each RRP 4+ 10+
H 0536 Heatsink to suit 25.95 A 0710
27.50 25.20 22.20
Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au
200 Kits & Toys All prices shown are RRP inc. GST.
Audio
Balanced Input Mic Pre-Amp Kit SPECIFICATIONS 59.5dB Champ 0.5 Watt Amp Kit RRP 5+
Mic gain -74dB
(SC April ’95) Designed by Altronics. Mic S / N ratio (SC Feb ’94) Physically about the same size 9.50 7.50
This kit will amplify a microphone (low Mic freq. resp. 180Hz to 20kHz as a standard 9V battery, this compact little
level signal) to a line level to connect Aux gain 13.5dB amplifier delivers 0.5W of power into 8 ohms RRP 4+
into an amplifier. It features high Aux S /N ratio -99 dBA from a 9V battery. Ideal for beginners, exper-
performance with a balanced mic input Freq. resp. imenting and small audio projects. Designed 14.50 13.05
as well as two auxiliary inputs which 30Hz to 20kHz around the LM386 audio amplifier IC, it uses
are all mixed. It can be configured to RRP 5+ only a handful of components and works RRP 5+
operate from either a single ended from 4 to 12V dc.
power supply (12V to 30V dc), or a split 24.95 21.50 17.95 15.95
rail power supply (±15V to ±30V dc), Price Each
making it ideal to build into any existing RRP 4+ K 2115 RRP 4+
amplifier.
45.00 40.00 Champion 7 Watt Amp Kit 27.95 24.50
Price Each
K 5531 RRP 5+ (SC January 2013) A fully upgraded and
redesigned version of the ‘Champ Amp’
Mini Microphone Pre-Amp Kit 9.50 7.50 (above). Delivers up to 7 watts of peak
power with lower noise and distortion levels.
(SC Sept 2010) This compact pre-amp RRP 4+ It also offers muting and standby control,
boosts signal levels enabling better volume out plus two mixed inputs. All on one tiny board!
of an unpowered mic when used with a mixer, 14.50 13.05 Based on the AN7511 amplifier IC. Operates
PC sound card or amplifier. Suits balanced or from 4 to 13.5V dc.
unbalanced mics. Increases dynamic range
and audio performance. Low noise and distor- Price Each
tion design. Line level output for easy connec- K 6066
tion. Kit includes case and colour front panel
label. Bridge Adaptor Kit For Stereo Amplifiers
Kits & Toys Price Each (SC July ‘08) With this simple circuit
K 5514 it is possible to make any stereo ampli-
fier deliver double its single channel
Pre-Champ Pre-Amplifier Kit power rating into a single load. It uses
just one economy integrated circuit
(SC July ’94) Designed to complement the and a few other components. Full con-
nection details supplied with the kit.
K 2115 champ amplifier. When it comes to sim- Connects direct to amplifier
power rail.
plistic but effective circuit design, you can't beat
Price Each
8 the pre-champ. It has been designed to comple- K 5566
ment the CHAMP kit, which when combined,
boosts the overall gain. Ideal for electret micro-
phone pre-amplification. Requires 6 to 12 Volts Balanced To Unbalanced Converter Kit
dc. PCB size 46 x 36 mm. (SC June 2008) If you need to send
audio over long distances this kit can con-
Price Each vert unbalanced line level signals to bal-
K 2112 anced. Perfect for preventing hum and
noise. The kit can also convert balanced
Champion Pre-Amplifier Kit signals to unbalanced.
(SC January 2013) Designed to complement SPECIFICATIONS:
the K 6066 Champion Amp kit. Utilises a low
voltage op-amp IC with considerably better per- Signal to noise: -100dB (1V output, 4.7k load)
formance than the ‘Pre-Champ’ above. Pro-
vides added gain to your signal when used with Freq. response: -3dB @ 2Hz to 200kHz
general audio circuits, microphones or instru-
ments. Requires 4-13.5V dc to operate. Power supply: 9V to 30V dc or +/-9V to +/-15V ac
Price Each Price Each
K 6044 K 5522
2 Way Active Crossover Kit
Guitar Pre Amplifier Kit (EA May ‘92) Simply connects be-
tween the audio source and the amp
(SC November ‘00) This preamp has the standard bass, mid, treble controls as allowing customised audio output. It Features • Adjustable frequency crossover point
well as an effects input. It will allow you to connect to a standard line input on an am- features dual output, one for bass and • Compact design fits
plifier. 6.35mm input and output. Ideal addition to any guitar amplifier design. Re- the other for mid/treble. Because no easily into cabinets • Requires 15V dc
quires 15-0-15V ac power supply. passive crossover is required there are
no losses involved. One kit per channel
required. Adjustable between 1.8kHz
and 3.6kHz. Requires ±15V dc power
supply or may be powered off amplifier
power rail.
Price Each RRP 5+ Price Each RRP 5+
K 5340 K 5570
54.95 46.95 25.00 23.00
www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999
All prices shown are RRP inc. GST. Kits & Toys 201
Guitar Jammer Kit Audio
(SC October ‘00) Ever wanted to 4 Channel Versatile Mixer Kit
play your guitar through your head-
phones along with your favourite RRP 5+ (SC June '07) This easy to build four channel mixer can be configured to suit a vari-
music at the same time? Well now you ety of input sources such as microphone, guitar pickup, CD player etc. It utilises low
can with the guitar jammer. Just plug 39.95 35.00 noise op-amps, housed on a single board, which means there’s no wiring required! All
the CD and guitar into this kit and you 17.95 inputs are via 6.35mm jacks. Each channel has a dedicated level control (plus mas-
can play along with the best of them. 1.60 ter), in addition to bass, midrange and treble adjustments. A headphone output is
CD and guitar volume controls. Can provided for monitoring. Ideal for bands, general announcing and background music
be operated on either a 9V battery or systems. Dimensions: 225W x 205D x 40H mm.
plugpack.
Price Each RRP 5+
Price Each
K 5536 K 5353 110.00 100.00
M 9237B 9V dc 670mA plugpack to suit M 8934A 12V dc 2A plugpack to suit 21.95
M 9191 2.5mm dc tip to suit M 9191 2.5mm dc tip to suit 1.60
Filter Capacitor Power Supply PCBs Sub-Woofer Controller Kit
Blank PCB only. Accepts 2 or 4 snap K 3015
in electrolytic capacitors. Ideal for use
in power amps and power supplies. RRP
Configurable for single ended or split
rail power. Accepts screw terminal 9.50
blocks for input and output. Note: no 12.50
components or connectors supplied.
(SC Dec ’95) Designed by Altronics This fantastic design includes an active filter Kits & Toys
Price Each for adjustable frequency cut off, volume control, preamplifier and phase shifter allow-
K 3010 2 Way ≈65 x 65mm ing the driving of amplifiers in either bridge or single configuration. It also features
K 3015 4 Way ≈65 x 95mm compressor limiting which means no harsh clipping if over-driven and an automatic
power up/power down in response to the audio input. For maximum compatibility it
Mono Speaker Protection Kit can be driven from either speaker or line level. The PCB can be housed remotely
within the sub-woofer cabinet with its amplifier or at the main equipment rack with a
(ETI Oct ‘82) Protect your valuable separate sub-woofer amplifier. Requires 12V ac plugpack M 9265A (Not included).
speaker system with this easy to build
kit. Provides both dc and overpower SPECIFICATIONS 0.005% Max output voltage: 6V RMS 8
protection up to 1500 watts. Discon- Harmonic distortion: -84dB @ 300mV
nects speakers within 1/10th of a sec- Signal to noise ratio: Cut off frequency range:60Hz to 130 Hz
ond of a fault occurring. Connects into Input impedance: 10k
the speaker line, installs in minutes. Output impedance: <1k Filter slope: 12dB /octave
One kit per speaker box. Requires no
external power! RRP 5+ Dimensions(mm): 163 x 90 x 32
Price Each 17.50 15.75 Price Each RRP 5+
K 5051 K 5562
M 9265A 12V ac 500mA plugpack to suit 39.95 37.95
Stereo Digital To Analog Converter Kit 18.95
240V Headphone Amplifier Kit
(SC Sept-Nov ‘09) This 24-bit, 96kHz-capable stereo DAC provides sound quality (SC April 2011) This battery powered head- RRP 4+
equal to high-end CD players. It has one coaxial S/PDIF input and two TOSLINK (opti- phone amplifier offers a significant improve-
cal) inputs, to which you can connect a DVD player, set-top box, PVR, computer or ment in performance over plugging straight 53.95 46.95
any other source of linear PCM digital audio. It’s also fitted with RCAs for connection into your smartphone or MP3 player. Particu-
to a stereo amp or receiver. This kit is ideal for improving the audio quality of your larly with larger enclosed type headphones
DVD player, especially when using it to playback CDs. It also reduces buzz, hum and which are not as efficient as their earbud coun-
signal noise, ensuring your listening experience is top notch. terparts. Provides substantial gain in signal-to-
noise, distortion, dynamic range and overall
volume. Plus a great deal more listening pleas-
ure. Kit comes complete with handheld case
and panel sticker. Requires a 2 xAA batteries.
Price Each
K 5508
Features • Connects between a DVD, set top box, PVR and your amplifier • S/PDIF coaxial Kit Difficulty Ratings.
input • Dual TOSLINK inputs • Stereo RCA output • Kit includes case, transformer, all
modules & components • Remote control volume & input selection (Uses Phillips RC5 code - Simple PCB, typically requires no soldering.
See A 1012)
Soldering with some drilling & wiring.
SPECIFICATIONS Linearity: within 1dB @ -90dB
SNR: -108dB (unweighted, 22Hz-22kHz); Slightly complex - winding inductors, heatsinking.
Frequency Response: 20Hz-20kHz
-114dB (A-weighed), 2V RMS Complex - kit requires chassis wiring & case construction.
THD: <0.0018% @ 1kHz and 2V RMS Supported Sample Rates: 28-108kHz
Channel Separation: -105dB @ 100Hz & 1kHz For experienced constructors - extensive wiring and
Supported bit depths: 16-bit, 20-bit & 24-bit advanced construction techniques.
Price Each
K 5332 Supported Channel Formats: stereo PCM
RRP 4+
299.00 269.00
Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au
202 Kits & Toys All prices shown are RRP inc. GST.
Audio
3 Band Parametric Equaliser Kit Mini Voice Operated Switch (VOX) Kit
(SC July ‘96) Traditional graphic SPECIFICATIONS 99dB Unweighted (SC Sept. ’94) Compact miniature de- RRP 5+
equalisers have fixed centre frequen- Signal to noise ratio: ±10dB sign uses only one IC to switch a relay.
cies and bandwidths, allowing for Maximum boost: 9.3V This versatile Vox circuit is triggered 12.95 10.50
level adjustments only. But, with this Maximum output: whenever a noise or sound is made (via
3-band parametric equaliser you can Range of Q: 0.45 to 5 the microphone) causing a relay to close
select a centre frequency in low, for a preset time. The circuit features an
mid, and high regions, and apply cut RRP 5+ almost instant turn on time with a 3 sec-
or boost over a selectable bandwidth ond delay before release. Requires 12V
in each band. It gives you incredible 49.50 45.00 dc supply.
flexibility to tailor the sound of your
system! Requires ±15V dc supply Price Each
(see our K 3215). Two modules are K 5544
required for a stereo equaliser.
Price Each Voice Operated Switch (VOX) Kit
K 5330
(SC July ‘11) This versatile Vox circuit is
FM Radio Microphone Kit triggered whenever a noise or sound is
made causing a relay to close for a pre-
This simple FM microphone kit can be set time. Requires 12V dc supply and
built in next to no time and only requires microphone. Reaction sensitivity and on
an ordinary FM radio for reception. Works time are fully variable. Optional manual
in the standard FM range 88-108MHz over-ride.
(adjustable). Runs from a single 9V bat-
tery. High sensitivity microphone insert Suggested uses • Controlling tape recorders • Slide projectors • Eliminate the need for a
supplied. Range is approx. 30M in ideal press to talk button on transmitters • Turn on external porch lights • Paging systems
conditions. • Hands free intercom switch
Price Each RRP 5+ Price Each RRP 5+
K 1106 12.95 11.00 K 5542
19.95 16.95
Kits & Toys Stereo Compressor Remote Volume Controller Kit
8 (SC June ‘02) Add a remote control vol-
ume to your latest audio project or ampli-
fier. Ideal for building into amp or RRP 5+
pre-amps. It features a precision motorised 39.95 37.95
pot so the knob will move when you adjust
the volume! It even mutes the volume at
the press of a button. The A 1009 remote
control suits this kit. Requires 12V dc.
Price Each
K 5026
(SC January ‘12) Do you hate the way the sound level on your TV suddenly jumps 5 Band Graphic Equaliser Kit
during the advert breaks? Or do you find that the sound levels vary widely when
switching between digital TV stations? Are the soft parts too soft and the loud parts (SC Dec '95) Vastly improve the
too loud? This stereo compressor solves that problem. It reduces the dynamic range versatility of your keyboard, guitar or
of the signal while still maintaining clean, low distortion sound. The unit is also ideal hi-fi system with this 5 band
for use with PA systems. equaliser. Ideal add-on to a pre-amp
or as a stand-alone unit. Band cen-
Price Each RRP tres at 63Hz, 250Hz, 1kHz, 4kHz
K 5526 and 16kHz with a ±12dB boost/cut
54.95 adjustable level on each band.
Touchscreen Digital Audio Recorder Price Each RRP 5+
K 5305
(SC Jun-July 2014) Record CD quality sound M 2855L 30V CT 150mA transformer to suit 29.95 27.95
directly to an SD card with this touchscreen 8.90
recorder. It offers hours of recording and play- Toslink - S/PDIF Converters
back time from an internal rechargeable Li-Ion
AA battery and may be recharged via USB. A K 5174 K 5175
stereo line input and mono mic input are pro-
vided via 3.5mm jacks, plus an internal micro- new (SC October '10) Got a coaxial output but only an optical input? Or perhaps the
phone for instant handheld recordings. A other way around? No problem! These converter kits are the solution - plus they min-
standard stereo 3.5mm audio output, plus RRP 2+ imise hum on coax connections. Requires 6-15V ac or 9-20V dc plugpack.
3.5mm headphone output are also included. All
adjustments and recording options are made via 139.00 125.00 Price Each RRP 4+
the backlit colour touchscreen. Supplied in a K 5174 Toslink to S/PDIF converter
durable handheld case. Ideal for journalists, K 5175 S/PDIF to Toslink converter 14.95 13.40
podcasting, education professionals and more! 14.95 13.40
Price Each
K 5530
www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999
All prices shown are RRP inc. GST. Kits & Toys 203
Audio & Development
RIAA Magnetic Cartridge Pre-Amplifier Kit Colour Maximite BASIC SD Card Computer Kit
(SC August ‘06) Resurrect Your Old
LPs and 78s! Adds a RIAA phono input
to any amplifier and allows easy line
level recording to CD or MP3. Prevent
the deterioration of your favourite vinyl
and revisit those golden oldies and clas-
sics by converting them to MP3. This
compact device allows easy connection
from turntable to PC.
Features • Can be equalised to suit various types of 45s, 78s and LPs • Low signal to (SC September '12) Fully upgraded Maximite design, see below for list of up-
noise • RCA input & output • Power supply to suit M 9265A. grades. Ideal for datalogging, monitoring and switching relays. Utilising the new Mi-
crochip PIC32 processor, this powerful embedded computer can read/save programs
Price Each RRP 5+ on an SD card. A keyboard input and video output is provided, plus 20 digital/analog
inputs and outputs. Utilises BASIC programming language allowing a massive scope
K 5513 37.50 34.50 of applications. For ease of construction, the main chip is been pre-soldered. Re-
M 9265A 12V 500mA plugpack to suit 18.95 quires 9V dc plugpack (fitted with 2.5mm tip). SD card sold separately.
M 9191 2.5mm dc tip to suit 1.60
Upgrades over K 9550 • Colour VGA output 480x432 pixels with 8 colours • Stereo
audio synthesiser • Battery backed real-time clock • Arduino compatible connector with
an additional 20 independent I/O lines • 2-channel audio/analog/PWM analog output
• Special commands for animated games
LED Bargraph Display/VU Meter Kit Price Each RRP 4+
K 9555
(ETI Oct ‘83) This easy to build universal 94.95 85.45
level meter displays a peak reading from -
21dB to 6dB in either dot or bar mode. RRP 5+ Mini-Maximite BASIC Computer Kit RRP Kits & Toys
Great for the car, home Hi Fi, disco con-
sole, mixers, audio monitoring. Operates 25.95 23.35 (SC Nov '11) The idea behind the 49.95
from 7 to 15V dc. miniMaximite is simple: to shrink the
RRP 4+ Maximite down to the size of a large
Price Each postage stamp while keeping it 100%
K 5412 39.95 35.95 compatible with the larger version in its
external I/O capabilities and programming
Hearing Loop Receiver Kit language. Ideal way to embed maximite
functionality into a project design.
(SC Sept 2010) Improve your hearing without
expensive aids! This pocket receiver kit picks up Price Each
signals from a hearing loop (or T-coil), com- K 9552
monly installed in commercial PA systems in
places of worship, halls and function centres. Web Server In A Box (WIB) 8
You could even install your own hearing loop at
home to work with your telly! Works with normal (SC November ‘09) Host and update
stereo headphones. Requires 9V battery. your own website without the need for
a computer! This compact box houses
Price Each a chip based server that may be
K 5547 accessed anywhere in the world - even
from a mobile phone. Beyond just
Multi-Station Headset Intercom Kit serving web pages it may also be used
to monitor and log four analog inputs,
240V or control four digital outputs for
remote activation of devices.
Features • Fully customisable settings, IP numbers, ports etc • MMC/SD/SDHC slot for
storage of web pages & images • SMTP email client • FTP client for remote uploading •
Dynamic DNS client • SNTP client • 4 analog inputs • 4 digital outputs • RS-232 serial port
for remote control • System logging
Price Each RRP 4+
K 6210
89.95 80.95
(SC Jun ‘92) This multi-station headset intercom is designed to provide clear com- Kemo® Pre-Built Tank Level Meter
munication in high noise environments such as race tracks and rock concerts. It is
compatible with many commercial systems and features low noise circuitry. For every Pre-built. This compact module measures the
headset to be used, you require a sub-station. Up to 12 sub-stations can be used level of liquid in a tank when connected to bare
from the one power supply. Sub-stations are connected on a loop-in, loop-out basis ie. end cables. The cables can be attached to the
daisy chained together. Power supply unit is 240V ac and delivers about 36V dc to side of the tank at different levels and when the
each sub-station. This allows for low noise, hands free communication over several button is pressed the current level is indicated
hundred metres of cable. Pre-punched and silk screened panels. XLR connections. by the LEDs. Suitable for inert liquids such as
water, waste water, slurry and acids (with suit-
Price Each RRP 5+ able corrosion resistant sensors). Requires 2 x RRP 3+ 5+
K 5250 Sub-station AA batteries. Max 100m cable length.
K 5255 Power supply unit 105.00 95.00 Size: 120 x 70 x 20mm 49.95 46.00 42.00
85.00 80.00 Cannot be used with combustible liquids.
Price Each
Q 4000
Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au
204 Kits & Toys All prices shown are RRP inc. GST.
Security
Portable PIC Programmer Kit Remote Control High Security ‘Rolling Code’ UHF Kit
K 9506 (SC Aug-Sep 2009) Ideal keyless
entry system for home or business.
K 9507 Control garage doors, door strikes,
lighting and more. ‘Rolling code’
(SC September ‘03) Totally portable design, powered by either a 9V battery or plug- ensures each time you operate the
pack. It’s capable of programming many chips such as 8 and 18 pin versions of remote control a different code is
PIC16F and PIC12F, 28 and 40 pin PIC16F87X series and 24CXX EEPROMS. used ensuring signals cannot be
28 Pin and 40 Pin Adaptor boards: If you need to program 28 pin or 40 pin chips intercepted. Three individual
then we recommend using these Adaptor boards. Exclusive to Altronics, the kit in- outputs. Up to 16 transmitters can
cludes 1 PIC chip, cable to connect to the K 9505 and a ZIF socket. Beware of be used in one system.
cheaper kits which do not include ZIF socket, data cable and 18 pin PIC16F84A chip. Kits include cases.
Price Each RRP 5+ Features • Three function buttons • Rolling code randomisation • Keyfob case
• Registering ability • Acknowledge LED indication • 12V dc operation (receiver) • Up to 16
K 9505 Portable programmer kit 49.95 44.95 transmitters • 3 x 230V ac relay outputs • Door strike output • Momentary or toggle output
K 9506 Adaptor board 28 pin includes PIC16F873-04 30.00 28.00 • Adjustable duration (0.26s - 4.4 min) • Transmitter lockout
K 9507 Adaptor board 40 pin includes PIC16F877-04 30.00 28.00
Price Each RRP 4+
K 1957 Keyfob Transmitter Kit
K 1958 Receiver Control Box Kit 39.95 35.95
84.95 76.45
Infra Red Rolling Code Remote Control Kit 433MHz UHF Remote Control Transmitter & Receiver
(SC October ‘07) Ideal for keyless (SC January ‘09) This easy to build trans- K 1955
entry for doors in cars, homes and mitter and receiver unit can remote activate K 1956
industry, this Keyless Entry System just about anything you want over a range
features a rolling code to ensure high of 30m! Up to 5 receivers may be used in
security. It also has two door-strike one area and each can drive a 12V relay.
outputs, an alarm system and provision Ideal way to activate pool pumps, garden
to use up to 16 separate keyfob lighting, motorised blinds and more. Mo-
transmitters with the same receiver. mentary or alternate. 9V battery powered.
Kits & Toys Features • Rolling code infrared transmission • Small keyfob style case • Dual function Price Each RRP 4+
buttons • Up to 16 separate transmitters can be synchronised • Two alarm inputs with exit K 1955 Transmitter
and entry delays • Two door strike outputs • Alarm output • Arm/disarm output and LED K 1956 Receiver 22.95 20.65
indicator • IR acknowledge LED • Strike 1 operates on arm, disarm or both • Strike 2 22.95 20.65
operates with momentary or toggle output • Transmitter lockout • Requires 12V dc supply
Price Each RRP 2+ Solar Powered Alarm Kit
8 K 1940 64.95 60.00 (SC March ‘10). This battery
powered alarm is perfect for
4 Channel Audio/Video Switcher Kit RRP 5+ sheds, boats, remote buildings, RRP 4+
caravans etc. It is solar powered
(SC June ‘01) If your home or 79.95 75.00 with 3 trigger inputs for instant 89.00 80.00
business has more than one or delayed operation. The PIR 29.95 23.70
CCTV security camera you will sensor has very low current
want an automatic scanner that draw. Other sensors such as
switches between the cameras so reed switches or pressure mats
you can see what’s happening, all may also be used. Inbuilt siren
on a single monitor. Adjustable and strobe output. SLA battery
scan rate. RCA inputs and out- and solar panel sold separately.
puts. Pause function and LED in-
dicators. Requires 12V dc. Price Each
K 6026
Price Each N 0700 Solar panel trickle charger
K 5842
RFID Security Module Kit USB Sensing Mains Power Switch Kit
(SC June ’04) Tired of fumbling in the (SC January ‘09)
dark for your keys? Perhaps you’re just irri- Do you have to manually
tated by having to enter a bunch of num- switch your PC’s peripherals
bers on a security panel. This RFID solves on (and later off again) each
all those problems by allowing entry, sim- time you boot your PC? If so,
ply by waving an encoded tag in front of this project will make life a lot
the receiver. easier. It monitors your PC’s
USB port and automatically
Features • Contactless operation • 90-100 mm detection range • No batteries in tag to go turns all that other gear on and 240V
flat • Stores up to 24 ID tags • Easy tag addition / removal • Works through any non off as required. Saves you
metallic object e.g. Wallet • Audible acknowledgment from on board beeper • Tamper power, plus the effort of crawl- RRP
detection • Arm & alarm outputs • Electronic door strike output • Suitable for car or home ing under the desk.
or office • Requires 12V dc @ 40mA 85.00
Price Each
Price Each RRP 5+ K 2920 4+
K 9300 RFID security module kit
89.95 79.95 80.00
www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999
All prices shown are RRP inc. GST. Kits & Toys 205
Motor Speed Control
Low Power Car/Bike USB Charger Kit RRP 4+ 1.5kW Induction Motor Speed Controller Kit new
(SC May 2010) Ultra efficient charging module 32.50 30.00 (SC April-May ‘13) This Induction 240V
suitable for permanent connection to your vehi- Motor Speed Controller is suitable for
cle. Operates at 89% efficiency, with a very low motors up to 1.5kW (2HP) and can be RRP 2+
quiescent current when not in use so it won’t used to control speed over a wide
flatten your battery! 12V input, 5V 525mA out- range. It will save big dollars with 249.00 226.00
put. Ideal for MP3 players, GPS devices and swimming pool pumps and will be
game consoles. Dimensions: 62 x 49mm. great for running machinery at differ-
ent speeds. Even better, it will control
Price Each 3-phase motors as well! Runs from a
K 1681 single-phase 230VAC, 10A power
point. Over-current, over-temperature,
USB Power Injector Kit under-voltage, over-voltage and short
circuit protection.
(SC October ’04) Do you have a new
USB-powered peripheral like a scanner Price Each
that needs more power than can be drawn
from the socket on your PC or USB hub? K 6032
This kit allows you to feed extra power into
the USB line, controlled automatically by RRP 5+ 12V/24V 20A Motor Speed Controller Kit
the PC so your new peripheral will be
turned on and off just as if it was power by 14.95 13.95 (SC June ‘11) This gutsy little speed con-
the PC. Requires 9V ac/dc. 22.90 troller has a wide range of applications
1.60 and is simple to build and use. There are
Price Each no software settings to fiddle with but it
K 2910 does have some really useful features RRP 4+ Kits & Toys
M 8925A 9V plugpack to suit such as low-battery protection, soft start
M 9191 2.5mm dc tip to suit RRP 2+ and adjustable pulse frequency. It can run 39.95 35.95
from 12V or 24V batteries at currents up
40A Motor Speed Controller Kit 75.00 70.00 to 20A. 8
This dc motor speed controller with digital dis- Price Each RRP 5+
play can handle up to a massive 40A continu- K 6007
ous whether it be a 12V or 24V motor. Great for 19.95 17.95
that electric bike or big robotics project! 4 digit Radio Control Servos Driver Kits (Pair)
display board for quick setup and monitoring of 240V
speed. (SC May ’94) This kit provides a con- RRP 4+
tinuous stream of pulses suitable for
Features • Auto soft-start and fast switch off • controlling servo motors. This kit pro- 49.95 45.50
Eight memory settings • 4 digit display of setup and vides two circuits on two separate
speed • Variable frequency for PWM • Battery level PCBs with all components. Essentially, 240V
meter • Low battery alarm • 40A @ 12V or 24V dc this kit gives you control over a servo RRP 4+
motor with a pot as your controller.
Price Each Each kit requires 5V dc. Dimensions : 29.95 27.25
K 6005 41x 35 x 12 mm & 40 x 50 x 13 mm.
Super Smooth Full Range Motor Speed Controller Kit Price Each
K 6050
(SC Feb-Mar ‘14) A completely up- new
dated design with super smooth control Power Tool Soft Starter Kit
for appliances rated up to 10A. Speed 240V
can be controlled from zero to maxi- (SC July ‘12) This handy kit pre-
mum with excellent speed regulation vents your electric saw, router or
under load. Suits brush-type universal other large mains-powered hand tool
motors such as those in small lathes, from kicking when you squeeze the
electric drills, grass trimmers, circular trigger. A great way to ensure a
saws, routers, nibblers and jigsaws. Its clean accurate cut every time when
even suitable for appliances such as using circular saws or plunge
lathes and food processors! Kit includes routers. Minimum load power 100W.
diecast case for excellent protection and Maximum load current 10A.
heat dissipation.
Price Each
Price Each RRP 4+ K 6043
K 6036
149.00 135.00 Soft Starter Power Kit
12V Motor Speed / Light Dimmer Controller Kit RRP 4+ (SC April ‘12) Prevents those nasty surge
currents when appliances switch on,
(SC November ‘08) This small circuit 12.95 11.60 preventing breakers from tripping due to the
can be used as a speed controller for a temporary high load level. This is a common
12V motor rated up to 5A (continuous) problem when switching on multiple
or as a dimmer for a 12V halogen or switchmode appliances from the same
standard incandescent lamp up to 50W. power circuit. Limits inrush current to
It varies the power to the motor or lamp appliances, without affecting performance.
using pulse width modulation.
Price Each
Price Each K 6042
K 6008
Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au
206 Kits & Toys All prices shown are RRP inc. GST.
Battery Chargers & Power Supplies Dual Tracking 0-19V Power Supply Kit
Lead Acid Battery Condition Checker Kit
(SC Aug ‘09) Checks the condition of 6, 12 and 24V
cells with a series of high current pulses. This is a
more accurate method of measuring battery condi-
tion compared to simply testing voltage output with a
multimeter. Suits lead acid and sealed lead acid
(SLA) batteries. It lets you know almost instantly if
your battery needs to be replaced. Requires no
power to operate.
240V
Price Each RRP 4+ (SC June 2010) This linear bench supply can deliver up to 1.6A from positive & neg-
K 1688 ative outputs with a range of ±0-19V. It has adjustable current limiting for both out-
79.95 71.95 puts and can display the voltage or current for either rail. Plus a fixed 5V 750mA
output for powering digital logic ICs and microcontrollers. Low noise and ripple. Preci-
sion LCD readout. Load regulation 0.1%. Dimensions: 200W x 155D x 65Hmm.
12V SLA Battery Float Charger Kit Price Each RRP 4+
K 3218
(SC March’03) This simple circuit was ini- 199.00 179.00
tially designed as part of a portable PA kit,
however it can be utilised as a stand alone Shortform Case Kit For Silicon Chip Hybrid Power Supply
charging circuit. Unlike similar designs this
unit feeds your batteries with pure dc and RRP 5+ new
automatically disconnects the battery when
power is removed from the charger. Charges 29.95 26.50 (SC Apr/May 2014) Pre-cut case, meters and power switch for the 0-40V, 5A hybrid
a 12V 7.2Ah battery to full capacity in 14 24.95 power supply published in Silicon Chip magazine. No PCB or parts included.
hours. Requires 16V ac.
Price Each
K 1695
M 9332A 16V ac plugpack to suit
Kits & Toys 12V Battery Charge Controller Kit Price Each RRP
K 3205
59.50
(SC April ‘08) Works in tandem with a
power supply or standard battery charger
to provide staged float charging for Universal Regulator Kit
sealed and non-sealed lead acid batter- (EA Aug ’97) A flexible circuit that provides pre-
set voltage output of 3, 5, 6, 9 or 12V dc. Suit-
ies. This prolongs battery life and pre- able for powering a wide range of dc low power
circuits, such as running a personal CD/radio
vents overcharging damage that cheap from a car cigarette lighter or powering external
peripherals from a PC. Delivers up to 1.5A de-
8 battery chargers can cause. It includes pending on heatsinking.
temperature compensation and LED indi-
Price Each
cation. All parameters are adjustable. K 3220
Price Each RRP 4+ RRP 5+
K 1677
64.95 58.45 6.95 6.25
6 & 12V Intelligent Gell Cell Charger Kit RRP 5+ Mini Switching Regulator Kit RRP
(SC July ‘89) These simple circuits will recharge your 6 25.95 22.50 (SC Feb ‘12) This tiny regulator board 12.95
or 12V gell cells correctly, considerably increasing their outputs 1.2-20V from a higher voltage DC
life span. Kit consists of one IC and a handful of exter- RRP 5+ supply at currents up to 1.5A. It’s small,
nal components plus the PCB. Charging current and efficient and cheap to build, with many
voltage is controlled and over-charging is avoided by the 14.95 13.50 handy features such as a very low drop-out
IC switching off when the cell is fully charged. voltage, little heat generation and electronic
shut-down.
Features • Supplied with components to build either 6V or
12V version • Automatic charge rate • 12V input 15 to 24V Price Each
dc • 6V input 9 to 24V dc • Supplied with chip details to allow K 6340
expansion of this kit
Price Each
K 1685
±15Volt, 1 Amp, DC Power Supply Kit 3V To 9V DC-DC Converter Kit
(SC August ’88) This great little design will (SC March ’04) Bought a 9V battery
give you +15V, -15V or ±15V. Requires lately? They’re horribly expensive and they
12-0-12 V or 15-0-15 V input (transformer don’t last very long if you want more than a
not supplied). M 2854L or M 2855L trans- few milliamps out of them. The solution is
formers are suitable. Can be used for ex- this little dc-dc converter so you can use
perimenting or powering pre-amplifiers or AA,C or D size cells instead.
op-amp circuits. Size: 75 x 55 x 30 mm
Features • Includes batt holder for 2 AA • Up to 90mA @ 9V • Can be set for 4.5V to 20V
Price Each output • Optional trickle charge for NiCd & NiMH batteries.
K 3215
Price Each RRP 5+
K 6330
15.95 13.50
www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999
All prices shown are RRP inc. GST. Kits & Toys 207
Automotive
Expanded Scale LED Voltmeter Kit High Energy Electronic Ignition Kit
(ETI September ’80) Brilliant single (SC November ‘12) A revised design of
chip design by ETI. Ten segment dis- Silicon Chips popular ignition replace-
play indicates exact voltage in 0.5V in- ment kits for cars. It can be used to re-
crements from 10.5V to 15V. place a failed ignition module in an older
Dimensions: 70 x 40 x 30 mm car, or to upgrade a mechanical ignition
system when restoring a vehicle. Will
Features • Invaluable where voltage monitoring is essential, i.e. battery charging circuit work with virtually any single coil ignition RRP 4+
• Great as a car battery voltmeter to allow you to diagnose an electrical problem • Ideal as system.
a deep-cycle battery monitor for inverter applications. 52.95 47.50
Price Each
Price Each RRP 5+ K 4030
K 4326
19.55 17.60
USB Datalogging Vehicle Instrument Display Kit Capacitor Discharge Ignition (CDI) Kit
(SC Dec ‘08) A do-it-all digital readout for your (SC May 2008) If the CDI module in your
car’s dashboard. Monitors up to six signals and motorbike, outboard, ride-on mower or other
displays up to 10 computed values in a scrolling small petrol motor fails, you could be in for
or static readout. Measure values such as fuel a shock. Depending on the brand or model,
injector duty cycle, air/fuel ratio, cabin/engine they can cost up to $400. You can build this
temp, fuel tank level, battery voltage etc or a one for less than $20 and it will do the
plethora of car ECU signals. Board dimensions: same job for most engines.
134 x 86mm.
Please note that this kit will not replace units that generate their own high voltage from an in-
Price Each verter requiring a 12V battery supply.
K 4352
RRP 2+ Price Each RRP 2+
The Screecher Car Alarm MK II K 4025
78.95 70.95 21.95 19.95
(EA Jan ‘99) A very simple, yet effective deter-
rent to car thieves. Controlled by a hidden RRP 5+ Multifunction GPS Boat Computer Kit Kits & Toys
switch inside your car, this alarm will sound an
ear-piercing 110dB piezo siren inside your vehi- 23.95 21.95 (SC October ‘10) Find your favourite RRP 4+ 8
cle when tripped. Features exit and entry delay, fishing spot with ease. Super accurate
with a three second pre-warn in case you forget RRP 5+ realtime laptop navigation via USB - never 198.00 179.00
to deactivate it, LED warning lamp and two trig- get lost or disoriented on the water again!
ger inputs. Dimensions: 57 x 93 x 20 mm. 34.50 31.50 Shares many of the features of the car
version above. Includes GPS module and
Price Each waterproof case. Displays: • Speed
K 4362 • Heading • Fuel consumption • Engine
run time • GPS Coordinates • Clock.
Low Voltage Cutout Kit for Cars and Boats
Price Each
(SC Jan ’92) Avoid getting caught out K 1143
with a flat battery! Simply connects
into a 12V accessories power line, and Turbo “Cool Down” Timer Kit
shuts off the flow if the battery voltage
drops to a low level. Ideal for battery (SC Nov ‘98) Turbo charged engines
powered camping fridges etc. Ad- must be run at idle for a few minutes to
justable 10.9-11.9V cutout. Max current cool down after a long journey to avoid
output 5A. damage. Allows your car to be run for a
few minutes at idle speed so you can lock
Price Each the car and leave it to turn off by itself.
K 4328
Features • 90 second time-out • Under
OBDII Automotive Interpreter Kit temp. disable • Reset switch • Simulated
ignition cutout for immobiliser • No battery
drain once shutdown RRP 5+
Price Each 29.95 26.95
K 4060
(SC February '10) When coupled with a laptop computer, this OBDII interface unit Motor Boat Twin Engine Speed Matching Kit
allows you to access all the information in your vehicle’s on-board computer. This in-
formation can be vital in diagnosing engine and electrical system problems. Plus it (SC November ‘09) This easy to build mod-
can help you maintain your cars efficiency to minimise emissions. OBDII interface ule can dramatically reduce vibration and
powers are found on many 90’s model vehicles and are virtually standard on cars noise by ensuring the RPM of each engine is
sold in Australia after 2006. This interface unit can be built for far less than the pro- matched. Engine speed mismatches can
fessional units used by mechanics. also reduce efficiency and increase engine
wear and tear. The kit reads the frequency
Price Each RRP 4+ signals from each engine tachometer and RRP 4+
K 4065 displays a readout on an analog gauge. This
149.00 134.00 shows RPM difference up to 200RPM on 35.00 31.50
port or starboard engines.
Price Each
K 6220
Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au
208 Kits & Toys All prices shown are RRP inc. GST.
Test Equipment AC/DC Clamp Meter Adaptor Kit
3-State Logic Probe MKII Kit (SC September ‘03) Perfect add on for your mul-
timeter. It can measure ac and dc currents simply
(SC August ’04) Need to test a logic circuit, then go no further. Designed in house by clipping onto the wire you wish to measure.
by Altronics. Perfect school project or beginners kit. Invaluable tool for everyone in the There is no need to expose the wire cores. This is
electronics industry. New ergonomic design plus input protection and on board power very handy when dealing with high currents or
supply. dangerous mains wiring. Includes UB5 jiffy box.
Requires 9V battery.
Price Each RRP 3+
K 2586 Features • Output 1A=1mV for ac and dc ranges
12.50 11.00 • 150A dc current max • 630A ac current max
• Low current consumption
PIC Probe SMD Kit Price Each RRP 5+
K 2582
(SC September ‘07) Indicates 28.50 26.00
3 conditions when testing circuits
and devices. This kit is a great intro- RRP 5+ Handheld TV Pattern Generator Kit
duction to working with SMD compo-
nents. 16.95 14.50 (SC June ’06) Ideal for video servicing and trouble
Note: supplied without pen case & needle shooting in the field! This compact, portable generator
point shown. creates 9 commonly used test patterns which are eas-
ily displayed on any device with a composite video
Price Each input, ie: projectors, LCD televisions etc. The standard
K 2587 patterns (shown below) allow easy diagnosis of com-
monly found video image distortion problems. In addi-
High Voltage DMM Adaptor Kit tion, two more RCA sockets provide stereo channels of
approximately 1.5kHz audio, with the right channel
clearly identifiable to assist in cable troubleshooting It
fits right in your hand, is easy to build, and is powered
by a 9V battery! Great for working on ceiling mounted
projectors. Includes programmed PIC chip.
Kits & Toys (SC April ‘10). Measuring high voltages on a standard DMM is usually limited to Price Each RRP 4+
750V ac - 1000V dc. This probe allows measurements up to 23-25kV dc, as found in
CRT based scopes, computer monitors and TVs. High voltages are also commonly K 2725 129.00 120.00
found in laser printers, photocopiers and microwave overs. Note: case not supplied.
ESR Capacitor Test Meter Kit (MKII) RRP 5+
Price Each RRP 4+
(SC April 2004) Identifies defective electrolytic ca- 89.95 80.95
8 K 2559 45.00 40.00 pacitors instantly, without the need to remove it
from the PC board. Capacitors can often show very RRP 5+
Ultra-Low Milliohm DMM Adaptor Kit high ESR levels whilst displaying the correct capaci-
tance on a multimeter. In devices such as switch- 79.95 68.75
(SC February ‘10). This compact Features • Connects to any standard DMM mode power supplies, high ESR in capacitors can
adaptor allows resistance measure- • Two ranges; 0-1 and 0-10 • Powered by inter- cause such issues as loss of regulation, excessive
ment between 0 and 10 in two nal 9V battery (not supplied) high frequency noise etc. This compact ESR meter
ranges. Far below most ‘off-the- is an invaluable tool for the service technician.
shelf’ digital multimeters. It is ideal Supplied with punched and screened case.
for matching resistors used in am- Requires 6 x AAA batteries.
plifier output stages to ensure equal
current sharing. Also used for meas- Price Each
uring panel meter current shunts. K 2574
Connects to your DMM via banana
plugs. Binding post test points. USB SD Card Datalogger Kit
Price Each RRP 4+ (SC December '10 - March 11) Based on a PIC
K 2531 micro, this simple project can log lots of data to a
55.00 50.00 memory card. It can read from many types of digital
and analog sensors and features a real-time clock
Ultra-Low Capacitance DMM Adaptor Kit and calendar to time-stamp the data. It has a USB
port and comes with a PC host program, allowing
(SC March ‘10). This compact Features • Connects to standard DMM with input you to configure the sensors, change settings and
adaptor allows capacitance meas- resistance of 10 or 20M • Three ranges; 0.3pF- charge the battery. This low-power USB Data Logger
urement between 0.3pF and 10nF. 100pF, 1pF-1nF, 10pF-10nF is useful for a myriad of applications, especially
Far below most ‘off-the-shelf’ digital • Powered by internal 9V battery (not supplied) where you need to log data over a long time period.
multimeters. It is ideal for measur- Requires 2 x AAA batteries
ing tiny capacitors or stray capaci-
tance in switches, connectors and Price Each
wiring. Connects to your DMM via K 2572
banana plugs. Binding post test
points.
Price Each RRP 4+
K 2576
34.95 31.45
www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999
All prices shown are RRP inc. GST. Kits & Toys 209
Test Equipment
Digital Capacitance Leakage Meter Kit RRP 4+ Digital Megohm Meter Kit RRP 4+
(SC December ‘09) This kit can perform a 84.95 76.95 (SC October ‘09). New updated digital 85.00 80.00
leakage current test on almost any type of ca- version of a kit favourite! Insulation
pacitor, including ceramic, mica, monolithic, breakdown can be determined by the use of this
metallised polyester or paper, polystyrene, digital megohm meter. This meter is ideally
solid tantalum and aluminium electrolytics. suited for checking breakdown in electrical
Seven standard test voltages from 10V to wiring, transformers, automotive generators and
100V are provided, allowing most capacitors alternators. Breakdown may be measured at
to be checked at or close to their rated volt- 500V or 1000V. Reads resistance up to 999M
age. Leakage currents may also be measured, and leakage currents to below 1µA. Requires
from 10mA down to less than 100nA. Re- 4xAA batteries.
quires 6 x AA batteries.
Price Each
Price Each K 2556
K 2558
LED Strobe & Tachometer Kit Digital Audio Oscillator Kit
(SC August ‘08) Allows you to measure the RPM of (SC June ‘09) Designed by Altronics. Provides an
fans, rotating shafts, propellers or anything that rotates! adjustable 10Hz to 30kHz output in sine, square, trian-
Readout displays RPM and frequency simultaneously. gle and sawtooth waveforms for testing amplifiers,
1RPM resolution for excellent accuracy. Measures up to speakers and other audio devices. Three output ranges:
65000 RPM. Adjustable flash period and divider options. 20mV, 200mV and 1V RMS. Requires 9V battery.
Requires M 9272A 12V dc plugpack and M 9191 tip.
Features • 10-200Hz in 10Hz steps, 200Hz-1kHz in 100Hz
Features • RPM and frequency readout on LCD • Generator steps, 1-30kHz in 500Hz steps. • 0-20mV, 0-200mV and 0-
or triggered strobe • Can be triggered via slotted disk or 1V RMS • ±4% accuracy • 2 x RCA parallel mono outputs
reflective light • Adjustable flash period • Fine frequency • 9V powered • Sine, square, triangle and sawtooth waves.
adjustment in generator mode • Wide frequency range
• 1 RPM resolution • Divider options when triggering Price Each RRP 4+
• Triggering indicator • Readout averaging K 2543
95.00 90.00
Price Each
K 2510 RRP 4+ Pocket Audio Oscillator Kit Kits & Toys
99.00 95.00 (EA Dec ‘96) Here's a high performance audio
oscillator that is small enough to actually fit in
LC Meter Kit your pocket! It produces sine or square waves
from 41Hz to 18kHz with low distortion (0.16% @
(SC May ‘08) Here's a handy piece of test gear you 1kHz), and has a maximum output level of 8
can build yourself – a simple yet very accurate Digital around 1V rms. Ideal for testing speakers, amps
LC meter. Great for testing unknown capacitors and or mixers. Just the thing for on-site testing of
inductors. With a stylish handheld case with front audio systems! It can even be used to clock logic
panel screen it makes for a professional finish that is circuits on square wave. Powered by 9V battery.
rugged enough for the tool box. Requires 9V battery
or 12V dc plugpack. Price Each RRP 5+
K 2544
SPECIFICATIONS 29.50 27.00
Inductance range: Approx10nH to 70mH Resistor/Capacitor Decade Box
Capacitance range: Approx 0.1pF to 800nF RRP 2+
Range selection: Designed by Altronics. (SC Aug. 2014).
Sample rate: Automatic A decade box is a really handy device for trying 119.95 110.00
Accuracy: Approx 5 per second capacitor and resistor values in-circuit before
you select the final value to solder down. This RRP 5+
+/-1% box offers a 1 to 999,999 resistance range
and 100pF to 9.99999µF capacitance range. 22.50 19.50
Price Each RRP 4+ The circuit has a residual resistance of 1 and
residual capacitance of 20pF. Output can be set
K 2533 95.00 90.00 up to be used in series or parallel. Easy thumb-
M 9272A 12V dc 0.5A Plugpack to suit 17.95 wheel value selection.
M 9191 2.5mm dc tip to suit 1.60
Price Each
S/PDIF Digital Audio Signal Generator Kit new
K 7520
(SC March ‘10) Features a S/PDIF coax-
ial and optical output, plus 2 analogue 3 Digit Counter Kit
audio outputs. Incredibly low harmonic
distortion, typically <0.06%. Produces (EA Jan ’98) This flexible 3 digit counter module
sine, square, triangle and sawtooth wave- is ideal for adding a digital readout to a project. It
forms, plus waveform mixing, pulse and can be expanded up to 30 digits by adding more
sweep modes. Typical applications include modules. It features blanking inputs, latching
RMS and music power testing of amps, input (display freeze), and up/down count select.
speakers; crossover optimisation, testing The display increments every time it receives a
DACs or speaker placement optimisation. rising edge pulse from an input source eg: PIR,
Digital output is ideal for testing modern light beam relay etc. Size: 46 x 71 x 33 mm.
AV devices. Requires 4 x AA batteries or Requires 5V dc.
9V plugpack.
Price Each
Price Each RRP 4+ K 2505
K 2553
149.00 134.00
Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au
210 Kits & Toys All prices shown are RRP inc. GST.
Timers & Miscellaneous
GPS Synchronised Clock Kit Mains Timer Kit For Fans & Lighting 240V
(SC March 2009) Tired of correcting (SC August ‘12) This small module is
the time on your wall clock? This GPS easy to build and can help save power by
circuit will convert a standard battery wall switching off fans or lighting after a set
clock into a precision timekeeper that period between 5s and 1 hour. It can also
never needs to be corrected. It will even be hooked up to a mains rated push button
automatically adjust for daylight saving for a timed manual activation of corridor
time. Ideal as a workplace time clock. lights etc. 5A/1250VA max rating.
Requires 2 x AA batteries. Note: must be installed by a licenced electrician
in most states.
Price Each RRP 4+ RRP
K 1129 Price Each
K 1131 GPS module to suit 48.95 44.00 K 6047 29.95
84.95
12V PIC Alarm Clock RRP 4+
Programmable ‘Versatimer’ Switch Kit
(SC July ’01) A simple to build alarm clock 45.95 40.00
with all the bells and whistles. Featuring a 4 (SC June ‘11) The ‘Versatimer’ drives a 12V
digit 12 hour display with AM/PM indicator. latching relay suitable for switching applica- RRP 4+
A melody alarm sounds at the set time to tions requiring a very low current drain. It
provide a wake up call / reminder. Conven- also provides a battery discharge protection 47.95 42.95
ient push buttons allow the unit to be set up. feature for use in designs with lead acid bat-
teries. Plus an in-built adjustable timer (1s to new
Price Each RRP 4+ 5 hours) which is triggered from external
K 8510 contacts. RRP 4+
M 9272B 12V dc plugpack to suit 29.95 27.95
17.95 Price Each 37.95 34.50
K 6125
Barking Dog Blaster Kit
Intelligent Fan Controller Kit
Kits & Toys (SC August ‘12) Are barking dogs
keeping you up to all hours? The (SC July 2010) This compact module will regu-
dog blaster hooks up to high late the speed of up to eight 12V fans. It meas-
power piezo tweeters (included) ures up to 4 temperature points and uses this
and outputs an ultra high fre- data to smoothly control the speed of the fans.
quency sound to deter dogs from Windows software allows monitoring of both fan
barking constantly. Features an ad- speed and temperature sensors. Can also be
justable timer and frequency. used in a stand alone fashion to spin up fans
Requires 12V dc power source. when temperature dictates. Ideal for green-
houses, home breweries, amplifier cooling etc.
Note: Please use this device responsibly. Excessive use may actually make barking Size: 100 x 80mm.
worse if the dog gets used to the noise.
Price Each
8 Price Each RRP 4+ K 6120
K 4500
73.95 67.95 Threshold Voltage Switch Kit
Programmable Remote Control Digital Timer Kit RRP 4+ (SC July 2014) A simple but versatile de-
vice to switch a relay when an input crosses
(SC August 2010) Switches low volt- 87.95 79.00 a preset threshold. It takes the output of an
age devices on or off after set peri- analogue sensor, battery voltage or other
ods. Can be configured to count up or varying voltage and switches power to a fan,
down, and is adjustable between 1s warning light or similar when a preset volt-
to 100hrs. A trigger input is provided age is reached. Suitable for use with 5, 12
to automatically start or stop timing or 24V power supply. Ideal for preventing
when events occur (such as a door overcharging in batteries. Trigger can be on
closing or motion detector). Program- high or low voltage. Includes S 4190D 5A
mable with an ordinary universal re- relay. 107 x 61mm.
mote (included). DPDT relay output
30V dc/24V ac - not suitable for Price Each
mains switching. K 4005
Requires 9V dc plugpack.
High Power Ultrasonic Cleaner Kit
Price Each
K 6145
Versatile Special Function Timer Kit (SC August ‘10) Build this large, heavy duty ultrasonic cleaner and blast away grime
from virtually anything, using just water & a little household detergent. Sensor can be
(SC November ‘08) This multi-purpose timer oper- dunked into a bucket of water for cleaning large objects. Great for cleaning car parts,
ates from a 12V supply and offers accurate timing pe- bric-a-brac and more! Requires 12V dc 2.5A plugpack (fitted with 2.5mm tip). Main
riods ranging from 0.1s to 16.5 minutes. Ideal for use unit size: 125Lx85Wx55Hmm.
in cars ie: to run cooling fans, security features etc.
RRP 4+ Price Each RRP 4+
Features • Triggered on rising or falling voltage (user K 6021
selectable) • One-shot or alternating (pulse) operation 29.95 26.95 99.00 89.00
• Pulse mode can be set for variable on/off periods • 0.1s
to 16.5-min timing period • Relay output with dual double-
throw contacts rated at 5A • LED indicator for timing
Price Each
K 6140
www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999
All prices shown are RRP inc. GST. Kits & Toys 211
Music Triggered Christmas/Lighting Controller Lighting
K 5885 LCD Thermometer/Thermostat Kit
240V (Designed by Altronics) Incorporating the new super accurate DS18B20 digital
temperature sensor, this thermometer/thermostat kit provides an accurate reading to
K 5886 1 decimal point. The LCD shows current, min and max temperatures. An internal
buzzer sounds whenever over temperature or under temperature limits are exceeded.
(SC October ‘10) Brings your Christmas light show to life! Lights will flash, dim up Ideally suited for monitoring air conditioners, cool rooms, wine cellars. Or activating
and down in time with your favourite Christmas carols. Power up to 32 channels of fans, heating/cooling equipment. With onboard programming socket and free down-
lights from a master unit and 4 slaves. Music input via SD card. Also great for shop loadable software (BASCOM) changes can easily be made to the program if required.
displays, promotional events and interactive exhibits. Master and slave units connect (see web site for firmware and software).
together using standard Cat5e data cable. Master requires 9V ac plugpack (fitted with
2.5mm tip). Master size: 155W x 90D x 28Hmm. Features • Sensor can be wired up to 300m away • Measures from -55°C to +125°C
• 0.5°C accuracy from -10°C to +85°C • N/O or N/C contacts, plus buzzer alert for over
K 5886 Standard Lighting Slave: Each slave can run up to 2300W of incandes- and under alarms • Adjustable hysteresis to stop output oscillation • Requires M 9272A 12V
cent/standard lighting. Powered by 240V ac. Size: 250W x 190D x 80Hmm. dc plugpack
K 5887 LED Lighting Slave: This new LED light slave controller kit will operate with Price Each RRP 2+
the K 5885 master unit. Drive up to eight strings of LEDs, each string with individual K 6115
control. Up to four slaves can be used per system - thats 32 channels of lights! 79.95 74.50
Price Each RRP 4+ MPPT Solar Charge Controller Kit
K 5885 Master unit
K 5886 Standard Lighting Slave unit 68.95 62.05 (SC March ‘12) Delivers optimum
K 5887 LED Lighting Slave unit 199.00 179.00 charge current to your connected batter-
89.95 79.95 ies via an in-built 3 stage charging sys-
tem (bulk, absorption, float). A handy
LED Musicolour Lighting Controller Kit equalisation feature allows you to ensure Kits & Toys
all cells in a bank are equally charged.
Suitable for charging 12V batteries from 8
nominal 12V panels up to 120W (can be
(SC Oct-Nov ‘12) An updated music driven lighting controller designed for LED modified to suit 24V systems with some
lights. Provides a continuously changing kaleidoscope of colour, changing in time to component changes). MPPT circuitry en-
the music. Controls up to 16 strings of LEDs, each tuned to individual frequency sures you get the absolute best perform-
bands.Great for Christmas lighting, DJ’s and parties. Accepts a 3.5mm line input ance from your solar panels.
from a CD/MP3 player, or use SD card slot as your music source. 12-24V dc output.
10A max total load. SD card not included.` Note: this is MKII version of this kit published in the March 2012 issue of Silicon Chip.
Features • Daylight bulk charge option • Low battery bulk charge option • Temperature
compensation • Automatic maximum power point tracking (MPPT)
Price Each RRP 4+ Price Each RRP 4+
K 5804 K 6029
89.95 80.95 81.95 76.90
Railpower Model Railway Controller Kit
MPPT Solar Lighting Controller Kit
(SC May-Jun ‘10) When coupled with a 5W solar panel (N 0005C) and 3.3Ah bat- 240V
tery (S 5080) this kit allows you to power up to 10W of LED lamps for 2.5 hours a
day - without any mains power! It accepts inputs from a remote switch, PIR move- (SC Sep-Oct ‘08) The ultimate D-I-Y model railway controller. Latest design offers IR
ment detector or ambient light sensor (automatic dusk switching). Includes Maximum remote control, pulse power for realistic low speed train movement, speed bargraph,
Power Point Tracking (MPPT) to ensure you get every last watt from your solar panel! adjustable braking inertia and more! 16-17V output up to 6A.
Direct LED drive makes connection easy. The battery is protected from over charging
& discharging. Features • Pulse power for extra smooth low speed operation • Back-EMF detection for
speed regulation • Front panel speed control • Speed setting displayed as bargraph and %
value • Speed bargraph • Adjustable simulated inertia with on/off • Adjustable braking iner-
tia • Forward and reverse lock • Indication of stop, direction, inertia & lockout • Overload
protection with visual and audible indication • Remote control (see A 1012 for remote to suit)
Price Each RRP 4+ Price Each RRP 4+
K 6028 K 6015
109.00 100.00 175.00 165.00
Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au
212 Kits & Toys All prices shown are RRP inc. GST.
Motors & Educational
Model Railway “Track In Use” Indicator Kit RRP 4+ PC Birdy Sounds Kit new
(SC Dec ‘09) A ‘track-in-use’ indicator for 23.95 21.95 (SC Aug ’13) A simple educational kit designed RRP 5+
model railway enthusiasts. This switch num- to mimic the noises of a tweeting Canary at
ber indicator may be used with any track se- K 6009 random intervals. Light dependent resistor 24.90 21.90
lector switch with up to 9 positions. It can (LDR) turns off sound in darkness and low light
operate with a bank of reed switches as may conditions. Includes four sound settings, new
be used in locomotive turntables etc. Func- Canary, Fife Canary, various phrases and
tions with any normally open contacts such as medley mode. Kit contains all parts required, RRP 5+ 10+
a reed switch, to indicate operation of a par- including a battery, speakers and a case.
ticular circuit. 3.95 3.45 3.15
Price Each
Price Each K 1117 new
K 6013
High Torque F260 Hobby Motor RRP 5+ 10+
Time Delay Flash Photography Trigger Kit
10,000RM rated hobby motor commonly 2.95 2.60 2.30
(SC January ‘09) Want to try your K 6011 found in robotics kits, toys and much more! 2.95 2.60 2.30
hand at ‘stop motion’ photography? 3-12VDC operation. 4.5V constant nominal
This camera shutter/flash controller operating voltage. 22.42gcm torque @ max
allows you to take a picture at a pre- efficiency.
cise moment between 1ms and
9.99s after a trigger. Triggering can Price Each
be from the included electret mic (to J 0026
pick up sound ‘events’), the K 6011
infra-red beam break kit or other sen- Low Torque F130 Hobby Motor
sors like a PIR detector or custom
sensor switches (not included). A 13,500RPM flat top & bottom hobby
Powered by 9V battery. motor commonly found in slot cars, robotics
kits, toys and much more! 8.64gcm torque
Price Each RRP 4+ @ max efficiency.
K 6009
K 6011 Beam Break Trigger Kit 68.50 64.00 Price Each
29.95 26.95 J 0022 1.5V
J 0024 3V
Kits & Toys “Knight Rider” LED Chaser Kit
Parallel Drive 120:1 Motorised Gearbox
(SC May ’02) This little LED chaser kit is
A 120:1 ratio reduction motorised gear-
super easy to build and provides a bright box, powered by 3 to 6V dc. Fitted with a
“keyed” output stub shaft with 2mm di-
addition to any shop display or vehicle. It ameter hole.
features 32 LEDs which glow bright red.
Built into its PIC micro controller are 12
8 selectable patterns. Speed is adjustable
via an on board trimpot. 12V dc opera-
tion.
Price Each RRP 2+ Price Each RRP 4+ 10+
K 5815 J 0015
44.95 40.85 14.95 14.20 13.50
Simple LED Chaser Kit High-Torque Worm-Drive Motorised Gearbox RRP 4+ 10+
(SC March ’94) Here is a project that A high-torque motor with a 42:1 ratio worm 19.95 18.95 17.95
will really catch your eye. It uses 10 drive and double ended output. Fitted to an
LEDs and flashes them two at a time in aluminium sub-chassis for simple installa-
a clockwise direction. A simple kit to tion. The 125mm x 3mm axle is fitted with
construct and provides an effective plastic bushings. Great for toy car projects
display. The rate of the chase can be or for powering a small robotics experiment.
varied by the potentiometer mounted on Powered by 3 to 6V dc.
the PCB. Requires external 6V dc.
Price Each
Price Each J 0020
K 5812
RRP 5+ Driveshafts
19.50 17.55 Metal driveshafts for making customised
drive designs in robots, etc.
Bellbird Sounds LED Chaser Kit
new Price Each RRP 4+ 10+
(SC Dec ’13) This delightful little kit is ideal for
beginners and combines the whimsical tones of J 0005 Steel driveshaft 75 x 2mm 0.75 0.60 0.50
a bellbird with an LED chaser all contained on a J 0007 Aluminium driveshaft 300 x 3.2mm 1.00 0.90 0.80
bell shaped PCB. Makes a great Christmas tree
decoration! Light dependent resistor (LDR) RRP 5+ New Items
turns off sound in darkness and low light
conditions. Kit contains all parts required, 29.95 27.95 Please note that many items marked as “new” may not be
including a battery.
available when the catalogue is released. For these items, we
Price Each
K 1128 suggest you contact us for stock availability before ordering
www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999
All prices shown are RRP inc. GST. Kits & Toys 213
Robot Builders Gearbox Base Educational
Provides an excellent foundation for your RRP 5+ Robotic Bug Kit RRP
own robot design. Contains 2 motors and all
necessary parts required for a robot gear- 15.50 14.10 A fun and educational introduction to electron- 34.95
box. Wheels and feet are provided depending ics. It uses three infra red emitting diodes to
on how you want your robot to get around! navigate around objects, through mazes etc.
Comprehensive instructions are provided so A microprocessor enables it to “think” on its
just about anyone can build it. Great for cus- own as it processes information about the its
tom PICAXE or Atmel designs. Perfect for en- environment. Supplied with all components,
thusiasts, designers, inventors and students. plus two sets of legs for different movements.
Requires 4 x AAA batteries (not included).
Price Each
K 1102 Price Each
K 1103
Robot Builders Motorised Base Kit
All-Terrain 3 In 1 Robot Kit
Gripper
new Forklift
K 1092 Rover
Available in either 2WD or 4WD configuration this robotic vehicle chassis features in- Great fun for the kids and students to build and play with! This single kit can be built
dividual motors for each wheel, fitted with encoding wheels for integration with control (and re-built) three ways to create a forklift, all-terrain rover or gripping ‘pick up’ ma-
sensors. It’s the ideal base for your own Arduino powered robo-car design. The acrylic chine. Tank like tracks allow it to roam over any type of surface. The wired remote
perspex chassis is pre-drilled with a variety of holes for mounting sensors, control control can command the unit to move forward, backward, turn, grip and lift. Lifting
boards etc. Includes 4xAA battery holder. capacity 100g. Includes wired remote control.
Price Each RRP 3+ 6+ Price Each RRP 4+ Kits & Toys
K 1090 2WD K 1095
K 1092 4WD 54.95 49.95 44.95 49.95 44.90
59.95 54.00 48.00
Infra Red Remote Control Battle Tank Kit Robotic Arm Kit 8
Turn your lounge room into a virtual battle- RRP A great introduction to robotics -
field! Up to 4 tanks can be used at once, each ideal project for students! This robot
taking pot shots at each other. This do-it-your- 39.00 arm features five motors enabling
self kit comes supplied with all the parts to base rotation, shoulder, elbow and
build a 6 wheel drive tank and controller (even wrist motion with a functional claw
camouflage stickers!). Battle sounds make the gripper. Includes a wired remote
experience complete. Suitable for ages 6 and control for complete control of all
up, and can be constructed in an hour or two. movements. With the addition of
Requires 4 x AAA and 4 x AA batteries. the USB interface kit, the robot arm
may be controlled by your Windows
Price Each PC. The included software allows
K 1080 you to record and replay move-
ments. 100gm lifting capacity.
Infra Red Remote Control Robo Soccer Kit RRP 4+
Price Each
Turn your table or floor into a soccer pitch K 1107 Robot Arm Kit 49.95 44.90
with these fantastic robots. Supplied with K 1108 USB Interface & Software Kit 34.95 31.45
all parts to build one robot soccer player,
ball and controller. The player can run after RRP Line Tracking Mouse Kit RRP 2+ 4+
the ball, and features a powerful spin kick
for spectacular long range goals. Play with 42.00 Great fun for the kids! An educational electron- 34.95 33.00 32.00
up to 4 robots at once. Suitable for kids age ics kit which, when constructed, is designed to
13 and up, and can be built in two hours. track along black lines on a tabletop. Simply
Requires 6 x AA batteries and a 9V battery. lay out a path of electrical tape, and watch it
follow the path! It includes easy to follow in-
Price Each structions, and takes approximately 1 hour to
K 1082 assemble for the average child. Ages 14 and
up. Requires 4 x AA batteries (not included).
Price Each
K 1105
i Education & Government Accounts
Universities, Colleges, Secondary Schools, TAFE Colleges & Government Departments qualify for 30 day credit accounts.
For more information call 1300 797 007.
Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au
214 Kits & Toys All prices shown are RRP inc. GST.
Educational
Crazy Cricket Kit RRP 5+ Crystal Radio Spring Terminal Kit new
(SC June 2012) Have some fun with this update 19.95 17.95 Build your own AM radio - no soldering re- RRP 6+ 10+
of a classic old kit. Hide him in a drawer and he quired. A crystal set was one of the first educa-
starts chirping away madly. As soon as he picks RRP 5+ tional kits available in the 60’s and is still 23.95 21.55 19.35
up loud noise or light he shuts up. Can also be going strong today! In fact, it was one of the
converted into a croaking frog - different sound 24.95 22.50 first designs that inspired Altronics founder new
but just as annoying! Very easy to build, an ideal Jack O’Donnell to start an electronics com-
starter kit for kids and electronics beginners. RRP 4+ 10+ pany. A great intro to electronics with a bit of RRP 6+ 10+
nostalgia too. No power required.
Price Each 24.95 23.90 22.50 24.95 22.45 19.95
K 1109 Price Each
RRP 4+ 10+ K 2216 new
PIC - Based LED Fun Kit
34.95 32.95 31.20 10 In 1 Spring Terminal Kit RRP 3+ 6+
(Designed by eLabtronics) A PIC - based
multi-function kit which uses a small micro 10 exciting projects including a morse code 39.95 35.95 32.35
controller to activate LEDs and a buzzer. Can generator, burglar alarm and a radio. A great
be configured to one of 8 different LED proj- introductory project lab for beginners in the new
ects ranging from an electronic dice to a world of electronics. No special tools or sol-
LED chaser. Great for beginners or introduc- dering required. Includes an easy to follow in- RRP 3+ 6+
tory class project. Requires 3 x AA batteries. struction guide for each project. A great way to
get kids excited about working with electronics. 69.95 62.95 56.95
Price Each Requires 9V battery. Ages 10 and up.
K 1100
Price Each
Kits & Toys Line Tracking Robot Kit K 2200
Great fun for the kids! An educational electron- 30 In 1 Spring Terminal Kit
ics kit which, when constructed, is designed to
track along black lines on a tabletop. Simply lay Build a radio, burglar alarm, water
out a path of electrical tape, and watch it follow detector, Morse code practice circuit,
the path! It includes easy to follow instructions, simple computer circuits, and much more!
and takes approximately 1 hour to assemble for No special tools or soldering required.
the average child. Ages 6 and up. Requires 2 x Includes a comprehensive 68 page manual
AA batteries (not included). with individual circuit explanations,
schematic and assembly diagrams.
Price Each Requires 9V battery. Ages 10 and up.
K 1085
Price Each
8 ‘Follow Me’ Robot Kit K 2204
This wheeled robot uses four inbuilt mi- 60 In 1 Spring Terminal Kit
crophones to detect sound direction and
moves toward it. Simply clap and the A great package to teach kids about the
robot will turn and move toward you. fundamentals of electronics. Build a
Clap a second time in a different spot compass, rain detector, invisible power
and the robot will switch and move in radio, electro magnet and more! No
that direction instead. No soldering re- special tools or soldering required.
quired. Requires 4 x AAA batteries (not Comprehensive manual included.
included). Ages 8 and up. Requires 9V battery and 2xAA batteries.
Ages 10 and up.
Price Each
K 1115 Price Each
K 2206
130 In 1 Spring Terminal Kit
AM/FM Radio Spring Terminal Kit new
A make-it-yourself AM/FM band radio which new The 130 in 1 Electronic Projects Lab Kit will start you on the road to a great hobby or
requires no soldering or special tools. career in electronics. It contains all the parts and instructions to assemble 130 edu-
This educational kit tunes into your favourite RRP 6+ 10+ cational and fun experiments and circuits. Build a radio, AM broadcast station, elec-
AM-FM radio stations and teaches kids the tronic organ, kitchen timer, logic circuits and more. Comes with built-in speaker, LED
principles behind radio. Includes earphone. 23.95 21.55 19.35 display, two fully integrated circuits and rotary controls. Requires 6 x AA batteries.
Requires 9V battery. Ages 8 and up.
Price Each
K 2212
Exclusive Savings Direct To Your In Box The 130 projects cover 11 categories of electronics and include: • Electronic compo-
nents • Basic / fun electronic circuits • Semiconductors • Display Circuits •Transistors
Subscribe to our email newsletter to receive the latest info on • Digital technology • Oscillators • Operational amplifiers • Radio communications • Test
and measurement circuits.
new kits, special stock offers & flyer sales. Subscribe online at
Price Each RRP 3+ 6+
www.altronics.com.au K 2208
99.95 89.95 80.95
www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999
All prices shown are RRP inc. GST. Kits & Toys 215
200 In 1 Spring Terminal Kit Educational
500 In 1 Spring Terminal Kit
new
Learn about the fundamentals of electronics in a safe environment. This electronics new
lab lets kids learn about transistors, diodes, capacitors, oscillators, electronic circuits
and schematic symbols. A must have for the engineer of tomorrow! A huge array of
fun projects to build with the comprehensive easy to read manual and included parts.
Requires 6 x AA batteries. Ages 10 and up.
Just a few of the projects you can build: • Radio broadcast station • Electronic games The ‘Rolls-Royce’ electronic lab kit with enough kit projects to keep you busy for possi-
• Telegraph • Sound effect generator • Wheel of fortune game • Strobe light • Liquid con- bly years! Includes comprehensive educational instructions to help you assemble all
ductivity tester • Electronic organ • Octave generator • Audio oscillator • Voltage level detec- 500 projects. Build up from the fundamentals to more complex projects. All with no
tor • Audio signal generator • Diode tester • Night light • Electronic bird, and many more! special tools or soldering required! Over 27 categories of projects which build your
knowledge up and allow you to tackle more complex designs and experiments. Ages
Price Each RRP 3+ 6+ 10 and up. Requires 6 x AA batteries.
K 2209
139.00 129.00 115.00
300 In 1 Spring Terminal Kit Kit Features: • In-built breadboard • Built-in speaker, LED display, integrated circuits, rotary
controls, transistors, transformers, diodes, resistors, capacitors, LEDs, phototransistors, ear-
phone and many more components • Advanced hardware course • Microprocessor based
software programming course • Amazing value at under a dollar per experiment! • Provides
a core understanding of microprocessors and programming • Learn how to read schematic
diagrams, basic component theory, work with digital hardware circuits and much more!
Price Each RRP 3+ 6+ Kits & Toys
K 2210
449.00 419.00 399.00
Electronic Digital Recording Lab Kit
new 8
This electronic science lab will teach you about electronics from A to Z. You will learn new
about electronic parts, how to read schematics, and wiring diagrams. All this, while
building up to 300 different projects. This kit uses two quick and easy hook-up meth-
ods via spring terminals or breadboards (just like the professionals use!). No special
tools required, supplied with an excellent quality manual. Requires 6 x AA batteries.
Kit Features: • Everything you need to build 300 exciting projects • Put your knowledge to This kit is a great introduction to the world of advanced electronic digital recording
work creating 300 different electronic experiments, special lighting effects, radio transmitter technology. It contains all the parts and instructions to build over 50 educational and
and receivers, amazing electronic sound effects, cool games • Includes built-in breadboard for fun experiments. The fully illustrated 60-page manual gives step-by-step project in-
easy wiring •LCD indicates the information during the experiments in process • Explore am- structions. It starts with an introduction to basic electronic principles before moving
plifiers, analog and digital circuits plus how to read schematic diagrams • Includes transis- on to explain how various components used in the lab work. You can then get stuck
tors, transformers, diodes, resistors, capacitors, phototransistors, CDs, integrated circuits, into learning about digital sound and voice recording and modulation. No soldering,
speaker, earphone, LEDs, LED digit display • Fact-filled illustrated manual included. tools or previous knowledge needed. Requires 3 x AA batteries. Ages 12 and up.
Price Each RRP 2+ 4+ Price Each RRP 4+ 6+
K 2222 K 2220
179.00 165.00 145.00 59.95 53.95 47.95
Kit Difficulty Ratings. i Semiconductor Teaching Chips
Simple PCB, typically requires no soldering. A valuable teaching aid developed by the Edin-
burgh University. This pack includes four ‘see-
Soldering with some drilling or wiring. through’ ICs mounted on a prototyping board,
plus a comprehensive booklet which outlines
Slightly complex - winding inductors, heatsinking. in simple language how ICs operate. Several
lessons are provided which teach students
Complex - kit requires chassis wiring & case construction. about resistor networks, transistor MOSFETS,
optoelectronics, oscillators and more.
For experienced constructors - extensive wiring and A great way to learn about ICs! RRP
advanced construction techniques.
Price Each 27.95
K 1400
Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au
216 Kits & Toys All prices shown are RRP inc. GST.
Educational
Motorised 4 In 1 Robotics Kit 7 In 1 Solar Space Fleet Kit
Includes detailed instructions to Beast A fun and educational kit
assemble all the included parts designed to assemble 7 different
into one of four different Truck space themed kit designs for kids
designs. Each design shows to learn about solar power and
different methods of robotic Cricket new Robot electronics. Includes parts to
movement, teaching kids about build space station, robot, rover,
geared movements in a practical RRP 4+ vehicle, astronaut, shuttle, and
and fun way. Powered by 1xAA dog! All versions use the
battery (not included). No 21.95 19.75 included solar panel or micro
soldering required. Ages 8 and rechargeable battery which power
up. different movements. No
soldering or special tools required
Price Each 10+ for assembly. Ages 10 and up.
K 1126
17.75
6 In 1 Super Solar Recycler Kit Price Each RRP 4+ 10+
K 1114
This educational kit uses Steamroller 24.95 22.50 20.00
common household items like Bottle Yacht 14 In 1 Solar Robotics Kit
soft drink cans and DVDs to CD Racer new Dog
create fun and interesting solar A fun and educational kit Row Boat
powered designs. The kit can be Robot designed to assemble 14 different
built (and rebuilt) up to 6 ways to inspire and challenge Roly-poly
different ways. Build a drumming your kids to learn about solar and many more...
robot, a CD racer, a steam roller, power and electronics. Includes RRP 4+ 10+
bottle yacht and more! No parts to build a snake, dog, crab, 29.95 27.00 24.00
soldering required. Ages 8 and boxer, turtle, row boat, beetle and
up. more! All versions use the Scorpion
included solar panel which will
Price Each RRP 3+ 6+ perform different movements Tank
K 1132 when placed in the sun. No RRP 4+ 10+
21.95 19.75 17.75 soldering or special tools required 31.95 28.95 25.95
for assembly. Ages 10 and up.
Kits & Toys 7 In 1 Solar Rechargeable Station
Price Each
An innovative solar kit that can be K 1113
assembled into a motorised toy,
plus a transforming solar pow-
ered recharging station. No glue
or soldering required. Provides T3 Solar Powered 3 In 1 Robotics Kit
8 hours of fun playing and trans- Build this kit into not one but 3
forming vehicles into different solar-powered robots! Includes
detailed instructions to assemble
configurations. Build a concept all the included parts which can
then be rearranged into a robot,
car, racer, dump truck, bulldozer scorpion or tank. All versions use
the included solar panel which
or solar car! Recharge station will perform different movements
when placed in the sun. A great
can also be powered by 2xAAA introduction to solar power and
electronics. No soldering
batteries (not included) to provide required. Ages 10 and up.
super fast recharging of your car
(5s vs 120s via solar power).
Each charge provides up to 90
seconds of play time.
Price Each RRP 3+ 6+ Robot
K 1121
21.95 19.80 18.40
T4 Solar Powered 4 In 1 Robotics Kit Price Each
K 1118
Build this kit into not one but T-Rex new Salt Water Fuel Cell Buggy Kit
4 different projects. Includes Drill Vehicle
detailed instructions to Rhino Beetle A V8 powered buggy that runs on salt
assemble all the included water! No batteries required. This kit fea-
parts which can then be Robot tures a detailed engine with moving
rearranged into a robot, t-rex RRP 3+ 6+ cylinders and crank shaft. Adjustable
dinosaur, drill vehicle and 19.95 17.95 15.70 height suspension twists as it navigates
rhino beetle. All versions use its way over obstacles. Learn about alter-
the included solar panel native energies that may power the cars
which will perform different of the future. Includes 3 fuel cell sheets.
movements when placed in Can be assembled in a few hours. Ages
the sun. A great introduction 8 and up.
to solar power and
electronics. No soldering Price Each
required. Ages 8 and up. K 1122
K 1142 Spare Fuel Cells 5 pack
Price Each RRP 2+ 4+
K 1123
20.95 18.90 16.80
5.95 5.40 4.80
www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999
All prices shown are RRP inc. GST. Kits & Toys 217
6 In 1 Robotic Solar Education Kit Educational & Toys
Hours of fun for the kids! A great way to learn 6 Axis Gyro Mini Quadcopter
about electronics and solar power. Each kit can be
assembled into one of 6 educational (and fun!) Fun for kids and
devices - windmill, hover craft, airboat, revolving big kids alike!
plane, car and puppy (pictured). And because it’s
solar powered, there are no batteries to worry new
about! Includes easy to follow instructions and all
parts. No soldering required.
Price Each RRP 4+ 10+ The best flying mini quadcopter we have evaluated. Lots of fun for kids (and big kids!)
K 1104 to fly around the house or in the back yard. Effortless hovering, flips and turns are
13.95 12.60 11.20 possible using the 2.4GHz 4 channel controller (30m range). Copter size 180W x
Solar Powered Grasshopper Kit 180D x 50Hmm. Recharges via USB with a 1 hour recharge time for about 7
minutes of flying time. Controller requires 4 x AA batteries (not included).
A life size grasshopper with a solar panel
on its back. When he’s placed in the sun, Price Each RRP
his body vibrates back and forth. Demon- X 3074
strates the principles of solar power in an 79.95
easy to build kit, suitable for kids ages 8
and up. No tools, soldering or batteries RRP 4+ 10+ UFO Sphere Copter
required!
9.95 8.75 7.75 This unique sphere copter provides
Price Each excellent flying experience with
K 1110 added protection from walls and RRP Kits & Toys
objects. 3 channel operation. In-
Salt Water Fuel Cell Motorcycle Kit built rechargeable Li-Polymer 49.95
battery provides up to 8 minutes of
An environmentally friendly motorcycle flying. USB charging lead included.
powered by a salt water fuel cell. A great Unit requires 30-40 minutes for a
way to learn about alternative energy full recharge. Typical flying range
ideas. No batteries required! Includes 3 10m. Controller requires 6 x AA
fuel cell sheets. Approx length 130mm. batteries (not included).
Can be assembled in under an hour.
Ages 8 and up. Price Each
X 3068A
Price Each
K 1111 new Spin-FX Magnetic Levitation Desk Toy 8
K 1140 Spare Fuel Cells 5 pack
RRP 3+ 6+ The latest in desktop distraction RRP 2+ 4+
Salt Water Fuel Cell Spider Kit technology has arrived at Altronics!
24.95 22.35 19.70 Procrastinate with the best of them 9.95 8.95 7.95
This creepy crawly spider uses a salt 4.95 4.45 3.90 with the new Spin-FX. Utilises the
water reactive fuel cell to power its legs. power of magnetism to minimise
Just by adding some salt water to the cell productivity in your workday. A great
plate, the spider will begin to creep distraction for anyones desk,
around. A great way to learn about alter- including the boss!
native energy ideas. No batteries required!
Includes 3 fuel cell sheets. Can be assem- Price Each
bled in under an hour. Ages 8 and up. X 3100
Price Each Remote Control Wall Climbing Car
K 1116
K 1140 Spare Fuel Cells 5 pack RRP 3+ 6+
Salt Water Fuel Cell Car Kit 16.95 15.50 13.95
4.95 4.45 3.90
An environmentally friendly mini car
powered by a salt water fuel cell. A great This remote control race car drives along any smooth surface, whether it be the floor,
way to learn about alternative energy wall or ceiling! IR control distance: 10-12m. Races along for up to 10 minutes per
ideas. No batteries required! Includes 3 charge. 30-40min charge time. Size: 150 x 80 x 45mm.
fuel cell sheets. Approx length 75mm.
Can be assembled in under an hour. Price Each RRP
Ages 10 and up. X 3080
29.95
Price Each
K 1120 RRP 3+ 6+ Got an electronics question?
K 1140 Spare Fuel Cells 5 pack
14.95 13.50 12.50 Try the reference section at the back of this catalogue. Packed
4.95 4.45 3.90
with plenty of handy formulae, books, tips and answers.
Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au
218 Green Energy & Lighting All prices shown are RRP inc. GST.
Solar Panels 15W 12V Solar Battery Charger
High Performance Monocrystalline Solar Panels
A 15W amorphous solar panel with 1A charge current output designed for keeping
your car, caravan or 4WD batteries topped up. Ideal for portable situations where
temporary charging might be required at campsites. Easy connection directly to
battery via croc clips or via car accessory socket. Includes hardware for permanent
mounting on the roof of a caravan or boat. Also suitable for remote power
installations such as water pumping stations, electric fences, remote lighting etc.
Bypass diode prevents battery discharge. Dimensions: 977L x 342W x 22D mm.
Price Each RRP 2+ 4+
N 0706
89.95 82.00 78.00
new 5W 12V Solar Battery Charger
Green Energy & Lighting These monocrystalline* silicon solar panels are designed for long life (up to 25 years) Sturdy all-weather construction with
and high efficiency output. They may be wired in series or parallel arrays. Lower anodised aluminium frame and tempered
wattage models are an excellent solution for remote or mobile power applications, glass amorphous panel. In ideal
electric fence battery banks, inverter systems, RVs, caravans, boats etc. Higher conditions, the unit produces up to
powered modules are fitted with bypass diodes which help to maintain panel output 400mA charge current which would be
current during partial shading of the panel. Low wattage models fitted with 500mm sufficient to charge and maintain a 12V
fly leads. Panels 60W and over are fitted with MC-4 solar connectors. lead-acid battery. Suitable for use in small,
self-contained 12V remote power systems
Features • 5 Year Workmanship Warranty • 10 years warranty, 90% power output such as water pumping stations, electric
• 25 years warranty, 80% power output • Aluminium frames • 3.2mm Tempered fences, remote lighting, boating or marine
glass panelling • Waterproof junction box • Bypass diodes fitted for 60W and above applications etc. It includes a bypass
diode to prevent the battery from
• -40°C to +85°C operating temperature discharging back though the charger.
Fitted with 2m lead and alligator clips.
N 0005D Power Connection Nom. V Vmp Voc Max A Dimensions: 465W x 320H x 25D mm. RRP 2+ 5+
N 0010D 5W 2.5mm2 Fly lead 12V 17.5V 22V 0.31A
N 0020D 10W 2.5mm2 Fly lead 12V 19.2V 23V 0.5A Price Each 59.00 55.00 52.00
20W 2.5mm2 Fly lead 12V 19.2V 23V 1.1A N 0704
9 N 0040D 40W 4mm2 Fly lead 12V 17.5V 22V 2.46A
N 0065D 65W 12V 18V 22.2V 3.9A 12V Solar Battery Trickle Charger
N 0080D 80W 4mm2 MC-4 12V 17.5V 22V 4.91A
N 0124 120W 4mm2 MC-4 24V 36V 44V 3.33A
N 0150D 150W 4mm2 MC-4 12V 17.5V 22.5V 9.21A
N 0190D 190W 4mm2 MC-4 24V 37V 45.3V 5.3A
4mm2 MC-4
Price Each Wattage Nom. V Dimensions Weight Diodes RRP 2+ 4+ Lead acid batteries self-discharge, even when disconnected, if they are not re-charged
N 0005D 5W 12V 330x175x18 0.8kg 1 regularly eg: when a car is not driven for long periods or a boat which is used
N 0010D 10W 12V 294x294x18 0.8kg 1 27.95 26.75 25.95 infrequently. This may permanently damage the battery’s capacity, requiring it to be
N 0020D 20W 12V 554x300x18 2.6kg 1 34.95 32.95 31.45 replaced prematurely. This charger is a great solution for battery maintenance, and
N 0040D 40W 12V 600x536x25 4.3kg 1 69.95 66.50 62.95 will keep batteries trickle charged. Bypass diode prevents the battery from
N 0065D 65W 12V 550x840x35 5.9kg 2 129.00 122.95 115.95 discharging back though the charger. Includes suction cups for mounting to inside car
N 0080D 80W 12V 1185x545x35 7.5kg 2 189.00 179.00 169.00 windows, alligator clips and cigarette lighter adaptor lead. Dimensions:
N 0124 120W 24V 978x808x35 11kg 2 229.00 219.00 209.00 355W x 125H x 13D mm. Note: Maintains charged batteries, will not charge flat batteries.
N 0150D 150W 12V 1480x680x35 12kg 1 399.00 360.00 320.00
N 0190D 190W 24V 1580x808x35 15kg 3 359.00 352.00 346.00 Price Each RRP 2+ 4+
445.00 435.00 425.00 N 0700
29.95 26.90 23.70
Solar Panel Mounting Brackets RRP 4+ 10+ Mini 0.75W 1.5V Solar Project Panel new
These ‘rust-free’ aluminium brackets provide 17.95 16.50 15.00 A small hobby solar panel designed for RRP 2+ 4+
an easy way of mounting the Altronics solar 35.95 33.50 30.50 use in solar powered projects such as
panel range to a flat surface. Ideally suited battery chargers, robots, science 19.95 18.00 17.00
for portable installations in 4WDs, caravans, learning etc. Epoxy encapsulated for
boats etc. added protection. Fitted with 100mm
bare end flyleads. 500mAh, 1.5V
Price Each output. 120 x 62mm.
N 0206 Pk 4 suit 18-28mm thick panels
N 0210 Pk 6 suit 35mm thick panels Price Each
N 0720
www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999
All prices shown are RRP inc. GST. Green Energy & Lighting 219
10W Solar Fold Out Portable Charger Solar Battery Chargers
12/24V Solar Charge Controllers
new
This compact carry case houses a 10W mono crystalline solar panel for charging A basic solar charge controller for permanent installations of lead acid or gel battery
your devices in remote locations where mains power is not available. A 5V USB 1.5A solar panel systems. It features a 3 stage charging sequence (boost, float and
output is provided for direct charging connection to your smartphone, tablet or GPS. equalise). LEDs are provided to indicate working status - normal, fault, overload and
A typical smartphone will take between 2 and 4 hours to charge with sufficient low battery. Suitable for 12V or 24V systems, the charger automatically detects the
sunlight. A tablet may take much longer (10-12 hours) as these are generally fitted connected battery voltage. Ideally suited to simple remote power systems such as
with far higher capacity batteries. A 6V and 15V output are also provided which can water pumping stations, electric fences, remote lighting, marine applications etc.
be connected to the included car accessory socket adaptor. Multiple units can also be
daisy-chained together for faster charging (lead included). Features • Suits lead acid or gel battery systems • Automatic fuse protection • Battery
Dimensions, closed: 210 x 290 x 50mm open: 720 x 290 x 30mm overload & deep discharge protection • Automatic 12/24V voltage selection • Reverse polar-
ity protection • Short circuit protection • Status LEDs • Diode protection
Price Each RRP 2+ 5+ SPECIFICATIONS N 2010 N 2012 N 2014
N 0710 Max charge/load current 10A 20A 30A
110.00 99.00 88.00 12V low voltage dis/reconnect 11.1V 11.1V 11.1V
24V low voltage dis/reconnect 23.4V 23.4V 23.4V
Max solar input voltage 47V 47V 47V
Terminal wire size 4AWG 4AWG 4AWG
Dimensions (mm)
177 x 96 x 43 177 x 96 x 43 177 x 96 x 43
Manson® Solar Charge Controller N 2077 Price Each RRP 2+ 4+ Green Energy & Lighting
N 2010 10A
A simple and effective charge controller. N 2012 20A 69.00 65.00 60.00
It is suitable for sealed or wet cell batter- N 2014 30A 99.00 90.00 80.00
ies and utilises the latest in solid state 129.00 120.00 110.00
MOSFET switching for reliable operation.
Rated charge current 6A. Manson® Solar Charge Controllers
Features • Simple to install & use SPECIFICATIONS 12V
• 6A charging current • Reverse current Battery voltage 6A
protection • Epoxy encapsulated Charge/load current 97 x 46 x 25.5
Dimensions (mm)
Price Each 3+ 5+
N 2077 RRP 35.00 34.00
37.95
Manson® Solar Charge Controllers With Night Load This versatile unit suits all types of photovoltaic panels and wet or sealed lead acid 9
batteries. A microprocessor provides optimal charging current and voltage according
N 2075 N 2076 to the actual state of charge and type of battery. The 3-stage (bulk, absorption & float)
charger ensures proper maintenance of batteries, maximising their service life. For
wet cells, an equalisation function automatically cycles the battery once a month for
two hours. The battery will disconnect if the terminal voltage drops below a preset
level and then reconnects once charged. N 2073 temperature sensor may be fitted
to automatically disconnect the circuit if the batteries overheat.
These units operate solely as a solar charger by day & switch the batteries to a load Features • 3 stage charge algorithms • Over-charge & over temp protection • Low voltage
at night via an auto-dusk detection circuit. Both are suitable for sealed or wet cell bat- disconnect • Over-discharge & reverse polarity protection • Back-current protection from bat-
teries and utilise the latest in solid state MOSFET switching for reliable operation. In- tery to panel • Auto dusk-detection • Display of battery voltage, panel voltage & mode
cludes low battery shutdown to prevent excessive discharge of connected cells. Useful
for night lighting applications such as garden or security lighting. SPECIFICATIONS 20A Models 30A Model
Max charge/load current 25A 35A
Features • Simple to use • Reverse current protection • Epoxy encapsulated • Low voltage Continuous load 20A 30A
disconnect • Overvoltage protection • Dusk detection & night switching • Compact & efficient 12V low voltage dis/reconnect 8-16V (adjustable) 8-16V (adjustable)
24V low voltage dis/reconnect 6-32V (adjustable) -
SPECIFICATIONS N 2075 N 2076 Voltage across terminal (PV to batt.) 0.8V 1.2V
Battery voltage 12V 24V Voltage across terminal (batt. to load) 0.4V 0.6V
Charge/load current 6A 8A Terminal wire size 12AWG 10AWG
Low voltage disconnect 10.5V 23V Dimensions (mm) 150 x 85 x 45 150 x 85 x 50
Dimensions (mm) 97 x 46 x 25.5 97 x 46 x 26
Price Each RRP 2+ 4+
Price Each RRP 3+ 5+
N 2075 12V 6A N 2071A 20A 12V 149.00 134.00 119.00
39.95 36.50 35.00 179.00 160.00 142.00
N 2076 24V 8A 49.95 46.00 43.00 N 2072 30A 12V 179.00 160.00 142.00
N 2067 20A 24V 29.95 26.75 23.50
N 2073 Temperature sensor lead
Important Note For Wholesale Customers !
All prices listed in this catalogue are RRP “retail” prices. To access our competitive wholesale pricing scheme
apply for an account via www.altronics.com.au or phone 1300 780 999.
Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au
220 Green Energy & Lighting All prices shown are RRP inc. GST.
GSL® Solar Chargers
GSL® MPPT Solar Chargers - Made in Australia. Manson® Digital Power Meters N 2081
These revolutionary maximum power point tracker N 2080
(MPPT) chargers are specialised switchmode converters
that maximise the electrical power attainable from a N 2086
solar panel, while optimising the battery charging
process. MPPTs can provide 20% more charging current N 2084
than conventional regulators. They automatically detect
battery voltage and are designed to operate with panel input voltages much
higher than the battery voltage. Panel voltage must be about 5V above the
battery absorption voltage. That is, a 12V lead acid battery has a max charging
voltage of about 14.4V, and for best efficiency will require a panel input voltage
of at least 18V. GSL MPPTs are an ideal upgrade from conventional regulators.
GSL® Compact 10A MPPT Solar Chargers
Australian Up to 20% more These digital power meters are ideal for measuring and monitoring the output of a
Made charge energy than portable PV solar power system. They simply connect inline between any DC power
source and a load. Up to 3 days worth of readings (amp hours, watt hours, voltage &
conventional current) can be logged by the internal memory. These can be monitored on a PC via
regulators the optional USB interface & software (N 2081). Requires no power (unless voltage
readings under 5V, external input provided.)
These compact 10A regulators are specialised switchmode converters that maximise
the electrical power attainable from a solar panel, while optimising the battery charg- Features • N 2080 fitted with internal shunt for easy connection • N 2084 can be used
ing process. They can provide 20% more charging current than conventional regula- with a shunt for 100A max current • In-line connection • Logs Amp hours, Watt hours, cur-
tors. Each model is equipped with absorption and float charging stages, plus pre-sets rent, min & max voltage • 3 min logging intervals • Up to 1500 measurements recorded
for charging vented or sealed lead acid batteries. Auto detects battery voltage and se- • Magnetic bracket • Optional USB PC datalogging adaptor & software
lects the appropriate charge regime. Easy 4 wire in-line connection between panels
Green Energy & Lighting and batteries. N 2028 has internal presets for dawn to dusk, low voltage disconnect, SPECIFICATIONS N 2080 N 2084
remote alarm, surge & PV short circuit protections. Current range: 0-20A continuous 0-100A continuous
Max current: 30A (30 minutes max)
PV Float Absorption Peak No Load Dimensions Resolution: -
Output Output Output Current (mm) Power: 0.01V, 0.01A 0.01V, 0.02A
Efficiency Input 13.5V/27V 250W 0.04A Voltage range: 0-3600W (0.1W res.) 0-10000W (0.1W res.)
N 2026 96% 15.5V-54V 13.5V/27V 14.5V/29V 250W 0.04A 35x75x100 Datalogging period:
N 2028 96% 15.5-54V 14.5V/29V 35x75x100 Datalogging interval: 5-60V 5-60V
Operating temperature: 75 hours 75 hours
Dimensions: 3 minutes 3 minutes
0-50°C 0-50°C
75L x 45W x 23Dmm 75L x 45W x 23Dmm
Price Each RRP 2+ Price Each RRP 3+ 5+
N 2026 MPPT 10A N 2080 5-60V 20A
N 2028 MPPT 10A Programmable 120.00 110.00 N 2084 5-60V 100A 75.00 68.00 62.00
130.00 120.00 N 2086 100A/50mV shunt to suit N 2084 79.95 74.0 68.00
N 2081 USB Interface & Software 51.95 46.95 41.95
GSL® MPPT Solar Chargers 84.95 76.50 68.00
9
Voltage & Current Wallplate With Shunt Box
Australian Australian
Made Made
new
N 2050
These MPPT solar chargers offer excellent performance and reliability for any high A wallplate designed for installation in caravans, RVs and off-grid remote power in-
output solar install. Their high efficiency switchmode design maximises the electrical stalls. It displays the voltage and current of the connected battery. Ideal for monitor-
power from your panels. Each model is equipped with absorption and float charging ing the output of a portable PV solar power system. Included with the wallplate is a
stages, plus pre-sets for charging vented or sealed lead acid batteries. Automatic de- shunt box which connects directly between the battery and the load. The internal
tection of battery voltage and charging regime makes setup incredibly simple. Easy 4 shunt is rated to 100A current and maximum voltage is 16V (suits 12V battery sys-
wire in-line connection between panels and batteries. tems only). Shunt box size: 125W x 62H x 82Dmm.
N 2032 Programmable: Offer the flexibility of programmable output and battery
disconnect voltages. Plus full datalogging PC software suite via the N 2050/2 MCM Price Each RRP 2+ 4+
remote panel. The remote panel displays instantaneous battery charge current, bat- L 1045 0-16V 100A
tery charging ampere hours, instantaneous load current , load ampere hours usage, 155.00 140.00 125.00
PV voltage, and MPPT temperature.
PV Float Absorption Peak No Load Dimensions
Input
Efficiency 15-95V Output Output Output Current (mm) !
N 2032 96% 15-95V
N 2030 97% 15-95V 13.5/27/54V 14.2/28.4/56.8V 1700W 0.05A 170x145x67
N 2036 97% 15-95V
N 2038 96% 13.5/27/54V 14.2/28.4/56.8V 1700W 0.05A 170x145x67
13.5/27/54V 14.2/28.4/56.8V 3400W 0.05A 260x145x67 Pre order online & pick up in store.
13.5/27/54V 14.2/28.4/56.8V 3400W 0.05A 260x145x67
Price Each RRP 2+ Our website offers convenient 24/7 online shopping - even if you
N 2030 MPPT 30A 309.00 299.00 don’t need your order delivered. Simply select “pick-up” when
405.00 390.00
N 2032 MPPT 30A Programmable 430.00 410.00 ordering and your goods will be ready to go when you arrive at
525.00 500.00
N 2036 MPPT 60A 185.00 175.00 the store. Conditions apply.
185.00 175.00
N 2038 MPPT 60A Programmable
N 2050 MCM Remote panel for N 2032
N 2052 MCM Remote panel for N 2038
www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999
All prices shown are RRP inc. GST. Green Energy & Lighting 221
Solar System Accessories
Solar Photovoltaic Cable Heavy Duty Battery Crimp Terminals Battery Isolator Key Switch
Designed for use in solar ROHS Heavy duty crimp termi- Battery isolate switch with
panel systems. UV sta- nal for connecting bat- removeable key. Rubber
bilised all weather, halo- TUV certified. tery banks. Suits cap prevents dust & debris
gen free, double insulated W 4206 & W 4208 buildup. M10 terminal.
construction. Super tough cable. For crimper to 100A 12V dc continuous.
outer sheath impervious suit, see T 1533 below. 150A 12V dc intermittent.
to oils & grease. 57.5Ø x 68mm (exc. key).
Price Each Stud (mm) RRP 4+ 10+
ALTRONICS W 7015 Solar Price Each RRP 4+ 10+
H 1763 6 3.95 3.50 3.00 14.40 12.80
H 1764 8 3.95 3.50 3.00 S 2690 15.95
H 1765 10 3.95 3.50 3.00 S 2691 Spare Key 10.00
Model W 7015 W 7016
1 x 84/0.30
Size: 1 x 56/0.30 High Current Installation Leads Rotary Dual Bank Battery Isolator Switch
70A
Rating: 42A 7.1mm Bare Ends
6.0mm2 ( 9AWG)
Outside diameter: 6.6mm -40 to 90°C Four way rotary battery
bank selector. Switch se-
Conductor: 4.0mm2 ( 11AWG) lections are, bank 1,
bank 2, bank 1 & 2,
Temperature rating: -40 to 90°C OFF. Dimensions:
69 x 69 x 73.5mm.
Price Per RRP (m) 1 Roll Lug To Lug M8 terminal connection.
W 7015 100m 3.50 295.00
W 7016 100m new 5.50 460.00
IP67 MC4 Solar Panel Connectors Heavy duty link leads for use in large remote power Continuous rating: 200A 12-50V dc
systems with battery banks. Lug size listed is diame- Intermittent rating: 300A
ter of stud hole. Cranking rating: 1000A
Insulation resistance:
P 8600 new Price Each RRP 4+ 10+ Dielectric strength: 100M min
P 8610 2000V dc 1 minute
P 8612 160A Bare Ends To Bare Ends 7.95 7.70 7.55 Price Each
W 8000 300mm Red 7.95 7.70 7.55 S 2695 RRP 4+ 10+
W 8001 300mm Black 29.95 28.25 26.50
19.95 19.35 18.80
160A 6mm Lug To 6mm Lug 19.95 19.35 18.80 IP67 Waterproof Circuit Breakers Green Energy & Lighting
W 8020 300mm Red
W 8021 300mm Black 47.00 44.50 41.00 High current weatherproof
47.00 44.50 41.00 circuit breakers with man-
160A 10mm Lug To 10mm Lug ual reset switch. Terminal
W 8044 3m Red size M6. UL94V-0 material.
W 8045 3m Black 3000A @ 30V dc interrupt
rating. Max voltage 42V dc.
Water & dust proof - IP67 rated. Commonly used ANL Type Fuse Block & Fuses
on photovoltaic solar panel arrays. Fully sealed design Price Each RRP 4+ 10+
is suitable for use in exposed installations. Rated 30A Fuse not
@ 1000V dc (70°C). Cable entry 6.5mm. Suits included. S 5885 50A 25.00 23.00 21.00
4mm2 solar cable, see W 7015. Ratchet crimper to S 5890 100A 25.00 23.00 21.00
suit T 1535. S 5893 150A 25.00 23.00 21.00
S 5894 200A 29.50 26.95 24.50
Price Each RRP 4+ 10+
This high current fuse block uses ANL type fuses. Heavy Duty Lug Crimpers 9
P 8600 Plug and socket 8.95 8.00 7.15 Suits 4-2G cable. Gold plated connections. 32V dc
P 8610 Dual line plug adaptor 16.95 15.90 14.90 rated fuses. Size: 124Wx38.5Hx37Wmm.
P 8612 Dual line skt adaptor 16.95 15.90 14.90
MC-4 IP67 Solar Leads Price Each RRP 4+ 10+ T 1531 new
S 6020 Fuse block 28.95 26.60 23.80 T 1533
S 5865 80A fuse 8.95 7.95 6.95
S 5866 100A fuse 8.95 7.95 6.95
S 5868 150A fuse 8.95 7.95 6.95
S 5870 200A fuse 8.95 7.95 6.95
new
Price Each RRP 4+ 10+ 2V 200Ah SLA Battery See tools section for full information.
P 8615A 2m 19.95 17.95 15.95 Commonly used in solar & Price Each RRP 2+ 4+
P 8618A 5m 29.95 26.95 23.95 communication battery
backup banks. Fully sealed T 1531 For Lugs 3-25mm2 99.95 89.95 79.95
design. Multiple cells can be T 1533 For Lugs 10-120mm2 165.00 155.00 145.00
linked to form one large bat-
Power Cable 160A 287/0.30 tery. Link terminals provided Solar Connector (MC-4) Crimping Tool
with each cell.
ROHS SA5059: 300mm battery link
cable with 10mm lugs.
High current capacity suitable for connection between Dimensions: 171Lx106Wx330Hmm.
battery banks and inverters. Weight: 14kg.
Terminal: B3, suit M10 bolt.
Size: 287/0.30 n W 4206 Red Heavy duty, all metal ratchet crimp
n W 4208 Black SA5059 tool designed specifically for terminating industry
Max current rating: 160A standard solar connectors for 4mm2 (11AWG) cable.
Adjustable crimp tension. Suitable for Altronics range
Outside diameter: 8.15mm of solar connectors. Essential for solar installers.
Conductor: 20.25mm2 ( 4AWG)
OFHC Max dc Res. at 20°C: 0.92m /m
Weight: 6.8kg per 30m Price Each RRP 2+ 4+
209.00 189.00
Price Per RRP (m) Roll S 5059 2V 200Ah 229.00 Price Each RRP 2+ 4+
30m Roll SA5059 300mm Link 14.95 T 1535 124.00 118.00 110.00
11.95 297.00
Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au
222 Green Energy & Lighting All prices shown are RRP inc. GST.
Inverters
About Powerhouse Inverters
• Sturdy construction for use in rugged environments • Soft starting • High efficiency • Reverse polarity
protection • Output overload protection • Over temperature protection • High and low battery voltage
shutdown • Output short circuit protection • Standard ac mains outlet for 240V connection.
Please Read Before Selecting An Inverter 600 Watt (1500W Surge) Inverter
Due to the complex range of electrical and electronic products available, care Thise 600W inverter provids up
must be taken when selecting the correct inverter. Many inverters will not start to 1500W surge capacity. It may
electric motors, compressors or fluorescent lighting. Powerhouse inverters will be used for portable TVs,
power these types of appliances. Please note however that electronic laptops, printers, battery
appliances with switchmode power supplies may require a surge rating of 4 to chargers, portable Hi-Fis, power
6 times the stated rated power of the appliance. Therefore you must consider drills, power tools, angle grinder,
the instantaneous start up current or surge of the appliance to be powered. The small pumps etc.
soft start feature of our inverters overcomes the majority of start up problems
SPECIFICATIONS 600W / 1500W Low battery alarm 10.5 ±0.5V
Output / surge power 230V ac @ 50Hz
Output voltage Modified sine wave Battery shutdown 10V Low / 15.5V High
Output wave form
Powerhouse® 150 Watt (450W Surge) Can Shaped Inverter DC input voltage 12V dc nominal Alarm & thermal shutdown 60 ±0.5°C
Efficiency (typical) >90%
No-load current draw <0.3A Dimensions (mm) 242L x 91W x 58H
Designed in the shape of a soft drink Net weight 1.7kg
can, this compact inverter mounts
snugly in your vehicle’s cup holder. new Price Each RRP 2+ 4+
Ideal for powering laptops, phone M 8084 12V 600W modified sine wave
chargers, small tools etc. Includes 149.00 135.00 120.00
USB socket with 2.1A output. Fitted
with car accessory plug and 0.7m 1000 Watt (2500W Surge) Inverter
lead for easy connection.
This compact rugged inverter is
Green Energy & Lighting SPECIFICATIONS 150W / 450W No-load current draw <0.5A ideal for a portable TV, laptop,
Output / surge power 230V ac @ 50Hz printer, battery charger,
Output voltage Modified sine wave Battery shutdown 10V Low / 15.5V High portable Hi-Fi, power drill/tool,
Output wave form small pump, lighting, etc.
dc input voltage 12V dc nominal Alarm & thermal shutdown 60 ± 0.5°C Massive 2500W surge rating.
Efficiency (typical) 90% Includes integral mounting
Dimensions (mm) 135L x 60W x 60H base plate for securing to a
vehicle.
Net weight 0.4kg
Price Each RRP 2+ 4+
M 8070A 12V 150W modified sine wave
46.00 43.00 39.00
SPECIFICATIONS No-load current draw <0.8A
Output / surge power
Powerhouse® 150 Watt (450W Surge) Inverter Output voltage 1000W / 2500W Low battery alarm 10.5 ± 0.5V
Output wave form 230V ac @ 50Hz
Compact and robust, this unit is dc input voltage Modified sine wave Battery shutdown 10V Low / 15.5V High
ideal for powering portable Efficiency (typical)
appliances directly from your 12V dc nominal Alarm & thermal shutdown 60 ± 0.5°C
>90%
9 car cigarette lighter socket. Dimensions (mm) 310L x 205W x 75H
Suitable for portable TVs, laptop Net weight 5kg
computers, printers, battery
chargers, portable Hi-Fis, etc. Price Each RRP 2+ 4+
M 8090 12V 1000W modified sine wave
249.00 225.00 199.00
150 Watt (300W Surge) Pure Sine Wave Inverter
SPECIFICATIONS No-load current draw <0.3A Pure ac output delivering stable
Output / surge power power to difficult loads. Designed for
Output voltage 150W / 450W Low battery alarm 10.5 ± 0.5V sensitive devices requiring low power
Output wave form 230V ac @ 50Hz input such as laptops, switchmode
dc input voltage Modified sine wave Battery shutdown 10V Low / 15.5V High plugpacks, game consoles etc. Input
Efficiency (typical) and output galvanically isolated for
12V dc nominal Alarm & thermal shutdown 60 ± 0.5°C added safety. Fitted with car acces-
>90% sory plug and 0.7m lead. USB 2.0A
Dimensions (mm) 165L x 91W x 58H 5V DC output included.
Net weight 0.85kg
Price Each RRP 2+ 4+ new
M 8072 12V 150W modified sine wave
49.95 44.95 39.90
300 Watt (1000W Surge) Inverter SPECIFICATIONS No-load current draw <0.5A
Output / surge power
Compact and robust, this unit is ideal Output voltage 150W / 300W Low battery alarm 10.5V ±0.5V
for powering portable appliances Output wave form 240V ac @ 50Hz
directly from your car battery (via dc input voltage Battery shutdown 10V Low / 15.5V High
croc clips). USB port is ideal for Efficiency (typical) Pure sine wave
charging devices on the move 11-15V dc nominal Alarm & thermal shutdown >60°
(500mA max output). Suitable for
portable TVs, laptops, printers, 85% Dimensions (mm) 177L x 108W x 60H
battery chargers, portable Hi-Fis, etc.
Net weight 0.7kg
Price Each RRP 2+ 4+
M 8010A 12V 150W pure sine wave
169.00 152.50 135.50
SPECIFICATIONS No-load current draw <0.3A i
Output / surge power
Output voltage 300W / 1000W Low battery alarm 10.5 ± 0.5V Education & Government Accounts
Output wave form 230V ac @ 50Hz
dc input voltage Modified sine wave Battery shutdown 10V Low / 15.5V High
Efficiency (typical)
12V dc nominal Alarm & thermal shutdown 60 ± 0.5°C Universities, Colleges, Secondary Schools, TAFE Colleges &
>90%
Dimensions (mm) 190L x 91W x 58H Government Departments qualify for 30 day credit accounts.
Net weight 1.1kg
Price Each RRP 2+ 4+ For more information call 1300 797 007.
M 8076A 12V 300W modified sine wave
69.95 62.95 55.95
www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999
All prices shown are RRP inc. GST. Green Energy & Lighting 223
Remote Power Inverters
Genius Power® Pure Sine Wave 3 In 1 UPS/Inverters
For home or business 240V mains backup power applications.
These state of the art pure sine wave UPS/inverters utilise sophisticated circuitry that includes a battery charger,
inverter, solar regulator and an automatic bypass switch suitable for a variety of power backup installations. They
are designed to be connected to 240V mains grid power or 240V generator, a solar array and suitably sized battery
bank. Under normal conditions the load is direct fed from the 240V source. Under 240V mains failure the inverter
powers the load from the battery bank. The automatic bypass switch seamlessly changes over from 240V mains
power to inverter power within 8ms. The control panel with LCD provides adjustments for mains output voltage,
output frequency. Essential battery parameters can be monitored including capacity remaining, current and volt-
age. The control panel may be removed and located remotely via Cat 5 UTP cable up to 50m from the main unit.
Inverter: Produces a clean and smooth sine wave ac output with very low distortion (<3%) and precise frequency
control. The soft-start circuitry and large surge capacity enable the units to power heavy inductive loads. The over-
load and short circuit protection system ensures safe and reliable operation. A bypass switch enables the unit to
operate as an automatic backup power supply whilst connected to the mains grid.
Battery Charger: Charges and maintains either gel cells or lead-acid battery banks up to 500Ah. The micro-
processor circuitry ensures batteries are charged to their optimum capacity using a 3 step process. This max-
imises battery capacity and life. Charging parameters are user-configurable depending on battery size. This allows
the charger to be matched precisely to the kinds of batteries being employed.
Solar Regulator: The internal solar regulator allows direct connection of solar panels, integrating them into a re-
mote power system. The connected batteries are charged and maintained automatically from the solar panels. If
the unit is connected to mains power or a generator, battery charge is automatically balanced between mains and
solar panels.
Features • Pure sine wave output with low distortion • Auto-switching between 240V mains and inverter output when new 5KVA model!
mains fails • Suitable for fixed backup power systems • Suitable for use in generator systems • Internal solar regulator
• Built-in 5 stage battery charger • User programmable charge parameters for optimum battery charging • Gel cell or
lead-acid battery compatible • Front panel can be remote mounted • Low battery alarm • Low battery shutdown
• Thermal shutdown • Short circuit protection
SPECIFICATIONS Green Energy & Lighting
Model M 8139 M 8144 M 8145 M 8148 Price Each RRP 2+ 4+ 9
Capacity 1KVA, 800W 2.4KVA, 1600W 3.6KVA, 2400W 5KVA, 4000W M 8139 800W 12V input UPS inverter
Battery input voltage 12V dc 24V dc 24V dc 24V dc M 8144 1600W 24V input UPS inverter 999.00 899.00 799.00
Efficiency (typical) >80% >80% >80% >80% M 8145 2400W 24V input UPS inverter 1349.00 1215.00 1080.00
Max charging current >40A >50A >50A >60A M 8148 4000W 24V input UPS inverter 1799.00 1620.00 1440.00
Output voltage 220-240V ac @ 50Hz 220-240V ac @ 50Hz 220-240V ac @ 50Hz 220-240V ac @ 50Hz 2699.00 2450.00 2160.00
No load consumption 3.8A 2.8A 3.3A 4.0A
Max output voltage 275V ac @ 50Hz 275V ac @ 50Hz 275V ac @ 50Hz 275V ac @ 50Hz
Power factor 0.67 0.8 0.8 0.8
Frequency regulation ±0.1Hz ±0.1Hz ±0.1Hz ±0.1Hz
Voltage regulation <3% RMS <3% RMS <3% RMS <3% RMS
Operation temperature 0-40°C 0-40°C 0-40°C 0-40°C
Weight 14kg 24kg 32kg 49kg
Dimensions (mm)
400 x 300 x 150 450 x 300 x 190 450 x 300 x 190 600 x 415 x 260
400 Watt (800W Surge) Pure Sine Wave Inverter 1000 Watt (3000W Surge) Pure Sine Wave Inverter
new
Pure sine wave inverter delivering efficient, clean ac power for sensitive devices such Pure sine wave inverter with high 1000W output. Delivers efficient, clean ac power for
as clocks, microwaves, laptops, medical equipment etc. Some items can only be sensitive devices such as clocks, microwaves, laptops, medical equipment etc. Some
powered using a pure sine wave inverter such as difficult switchmode loads. USB items can only be powered using a pure sine wave inverter such as difficult
output allows easy connection for charging your devices such as tablets and switchmode loads.
smartphones (2.1A max output).
SPECIFICATIONS
SPECIFICATIONS No-load consumption <4W Output / surge power 1000W / 3000W M 8017A low battery alarm 10.5V ± 0.5V
Output / surge power Output voltage 240V ac @ 50Hz
Output voltage 400W / 800W Low battery alarm 10.5 ± 0.5V Output wave form M 8018A low battery alarm 21V ± 1V
Output wave form 240V ac @ 50Hz M 8017A dc input voltage Pure sine wave
dc input voltage Battery shutdown 10V Low / 15.5V High M 8018A dc input voltage 11-15V dc nominal M 8017A low battery shutdown 10V
Efficiency (full load) Pure sine wave Efficiency (typical) 22-30V dc nominal
11-15V dc nominal Alarm & thermal shutdown 60 ± 0.5°C No-load current draw M 8018A low battery shutdown 20V
82%
85% Dimensions (mm) 200L x 108W x 60H < 1A Alarm & thermal shutdown 60° ± 0.5°C
Net weight 1kg Dimensions (mm) 274L x 131W x 83Hmm
Net weight 1.7kg
Price Each RRP 2+ 4+ Price Each RRP 2+ 4+
M 8012A 12V 400W pure sine wave M 8017A 12V 1000W pure sine wave
239.00 219.00 209.00 M 8018A 24V 1000W pure sine wave 499.00 450.00 400.00
599.00 540.00 480.00
Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au
224 Green Energy & Lighting All prices shown are RRP inc. GST.
Solar Installation Diagrams
12V DC Solar Power System For Boats / Mobile Homes
White P 8600 System Parts List
Description
Green 80A Fuse + Qty
- N 0150D 150W 12V Solar Panels 2
Black N 2030 30A MPPT Solar Charger 1
NEGATIVE P 2156 12W 60A Terminal Block 2
Red 3 x P 0225 S 6020 ANL Fuse Block 2
Bus Links S 5865 80A ANL Fuse 2
+- S 5893 150A Circuit Breaker 1
P 0225 Terminal Bus Links 6
Series - P 8600 MC4 Line Plug & Socket 1
Configuration - W 8000 300mm Bare End Lead Red 2
W 8001 300mm Bare End Lead Black 1
- W 8020 300mm 6mm Lug Lead Red 2
Green Energy & Lighting SDC225 W 8044 3m 10mm Lug Lead Red 1
++80A Fuse W 8045 3m 10mm Lug Lead Black 1
++ W 7015 Solar Cable 4mm2 100m
N 2030 MPPT Solar Charger POSITIVE
Active3 x P 0225
S 5893 Bus Links
Neutral 150A
Active N 0150D 150W 12V (Nominal) Solar Panels
Earth Breaker
150A - 13.8V DC LOADS
+ • Fridge/Freezer
• Water pumps
P 2156 12 Way 60A • Other low voltage
Extra HD Terminal Block
appliances
12V Battery
24V DC Solar Power System For Boats / Mobile Homes
White P 2156 12 Way 60A P 8600 System Parts List Qty
Green Extra HD Terminal Block Description 2
Black 80A Fuse 1
Red 80A Fuse + N 0190D 190W 24V Solar Panels 1
M 8145 2400W 24V Input UPS Inverter 1
+- - N 2036 60A MPPT Solar Charger 2
M 8168 24V to 13.8V 20A DC Converter 2
9 NEGATIVE Series P 2156 12W 60A Terminal Block 1
3 x P 0225 Configuration 2
Bus Links - HPM HL RCD 30-225 Breaker 2
- - HPM HC 04S Housing 1
S 6020 ANL Fuse Block 6
N 2036 MPPT Solar Charger POSITIVE N 0190 24V (Nominal) 190W Solar Panels S 5865 80A ANL Fuse 1
M 8145 3.6KVA Inverter 3 x P 0225 S 5893 150A Circuit Breaker 2
Bus Links P 0225 Terminal Bus Links 2
P 8600 MC4 Line Plug & Socket 3
S 5893 12V DC LOADS W 8000 300mm Bare End Lead Red 2
150A W 8001 300mm Bare End Lead Black 2
(20A Max.) W 8020 300mm 6mm Lug Lead Red 3m
Breaker W 8044 3m 10mm Lug Lead Red 100m
• LED Lighting W 8045 3m 10mm Lug Lead Black
150A • Low voltage appliances W 2130 Bare End Fig ‘8’ Lead
W 7015 Solar Cable 4mm2
-
+ In addition to the parts listed, the following
cable is also available from Altronics:
- 24V DC LOADS W 0587 3 Core TPS 15A 240V AC Lighting
Cable (for mains GPO & lighting), page 360
+ • Fridge/Freezer W 4052 Ultra Heavy Duty 37/0.25 Figure ‘8’
• Water pumps Cable (for connection of DC loads, max 17A),
2 Way Terminal Block • Other low voltage page 359
appliances Important notes:
1. Cables between batteries, inverter and MPPT
M 8168 24V to 13.8V charger must be kept as short as possible to
Converter minimise losses
2. If located in cyclone or flood prone areas, battery
-+ RCD RCD terminals must be 600mm above ground level.
3. Inverter must be 900mm above ground level.
Red GPO’s
Black
HPM Earth
24V Battery Lighting Leakage
Circuit
Earth Stake Neutral Breakers
ALL 240V MAINS WIRING TO BE INSTALLED BY QUALIFIED & LICENCED ELECTRICIAN.
NOTE: Using more than 2 x 24V nominal panels will require a “series parallel” configuration to ensure nominal panel voltage is 48V. Total panel open
circuit voltage (Voc) must be less than MPPT max input voltage of 95V (see panel specifications). For an example of “series-parallel” see next page.
www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999
All prices shown are RRP inc. GST. Green Energy & Lighting 225
Solar Installation Diagrams
Remote Solar Power System With Battery Backup
24V in2p4uVt4w.8itKhW24W0itVh 2A4C0,V2A4CV, D24CV&DC12&V1D2VCDoCutOpuuttpsu.ts
P 2156 12 Way
60A Extra HD
Terminal Block
White +
-
Green 80A Fuse
Black
Red
+- M 8168 24V to 13.8V
Converter
NEGATIVE
3 x P 0225 12V DC LOADS
Bus Links (20A Max.)
80A Fuse • LED Lighting SDC225
• Low voltage appliances
N 2036 MPPT Solar Charger POSITIVE
M 8145 3.6KVA Inverter 3 x P 0225
Bus Links
S 5893 -
150A +
Breaker -
+
150A
2 Way Terminal Block
24V DC LOADS P 8600
• Fridge/Freezer P 8612 P 8610 Green Energy & Lighting
• Water pumps
• Other low voltage
appliances
Earth -+ -- + P 8615 lead
Active + P 8615 lead
Neutral Red
Black
-
HPM Earth
RCD RCD Leakage Circuit + 9
Breakers Series
Parallel
Configuration
Earth Stake
240V
AC GPO’s
-
240V AC Lighting Link Link +
ALL 240V MAINS WIRING TO BE INSTALLED BY Bank of 12 An optional second N 0190D 24V (Nominal) 190W Solar Panels
QUALIFIED & LICENCED ELECTRICIAN. S 5059 2V 200Ah battery bank may
be used for a
9.6KW system.
System Parts List Qty Description Qty In addition to the parts listed, the following cable is also available from Altronics:
Description 4 P 8610 MC4 Dual Line Plug Adaptor 1 W 0587 3 Core TPS 15A 240V AC Lighting Cable (for mains GPO & lighting
1 P 8612 MC4 Dual Line Socket Adaptor 1 connection), page 360
N 0190D 190W 24V Solar Panels 1 P 8600 MC4 Line Plug & Socket 1 W 4052 Ultra Heavy Duty 37/0.25 Figure ‘8’ Cable (for connection of DC loads,
M 8145 2400W 24V Input UPS Inverter 12 max 17A), page 359
N 2036 60A MPPT Solar Charger 1 P 8615 MC4 Socket to Plug Lead 2m 2
S 5059 2V 200Ah SLA Battery 2 2 Important notes:
M 8168 24V to 13.8V 20A DC Converter 2 W 8000 300mm Bare End Lead Red
P 2156 12W 60A Terminal Block 1
2 W 8001 300mm Bare End Lead Black 2 1. Cables between batteries, inverter and MPPT charger must be kept as short as possible
- HPM HL RCD 30-225 Breaker 2 W 8020 300mm 6mm Lug Lead Red to minimise losses
- HPM HC 04S Housing 1 W 8044 3m 10mm Lug Lead Red 3 2. If located in cyclone or flood prone areas, battery terminals must be 600mm above
S 6020 ANL Fuse Block 6
S 5865 80A ANL Fuse 2 ground level.
S 5893 150A Circuit Breaker
P 0225 Terminal Bus Links W 8045 3m 10mm Lug Lead Black 2 3. Inverter must be 900mm above ground level.
W 2130 3m Bare End Fig ‘8’ Lead 1 PLEASE NOTE: THIS INFORMATION IS PUBLISHED AS A GUIDE FOR SYSTEM
W 7015 Solar Cable 4mm2 100m DESIGN. IF IN DOUBT, CONSULT A PROFESSIONAL. SOLAR SYSTEMS CAN
DELIVER LETHAL VOLTAGES IF NOT INSTALLED CORRECTLY.
Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au
226 Green Energy & Lighting All prices shown are RRP inc. GST.
Battery Accessories & Solar Books
Solar Projects For The Evil Genius Kemo® Low Battery Cut Off Module (12V)
Increase your understanding of powerful and This battery saver protects your 12V car bat-
environmentally friendly solar energy. Contains 30 tery from discharge by disconnecting loads to
exciting projects from solar robots to converting your prevent voltage dropping below a preset limit
home to run on solar energy. Pretested projects with (10.4 to 13.3V). The module automatically re-
clear schematics and diagrams assume no prior connects the loads once the battery
experience with alternative energy. A fantastic way to recharges, typically 0.8V above cut-off limit.
reduce conventional power usage in your home. 220
pages. Cut off point: 10.4 to 13.3V
Gavin D J Harper. Dimensions: 87W x 60D x 33Hmm
Price Each RRP 3+ 6+
A 0712
42.00 39.00 37.00
Price Each RRP 24V DC To 13.8V DC Converters
B 2482
29.95
Solar Success: Getting It Right Every Time M 8162
A comprehensive guide to installing home and busi-
ness solar systems including chapters on; appliance
compatibility, system configurations and design, safety,
cabling & costing. The most comprehensive solar book
released by the author. It will help reduce your carbon
footprint and energy usage - reducing environmental
impact. 112 pages.
Collyn Rivers
M 8168
Green Energy & Lighting Price Each RRP Ideal for powering 12V automotive appliances from a 24V battery bank. These devices
B 2330 convert 24V dc to 13.8V dc. Suitable for use with stereos, CB radios, lighting etc in
47.50 trucks, buses, cars or boats. 24V input wiring connects via screw terminals, 13.8V
Solar That Really Works output connects via binding posts.
RRP
Now in full colour & fully revised! SPECIFICATIONS M 8162 M 8168 Features • Overload & over current
An in depth guide to powering caravan & motorhome 42.50 13.8V dc protection • Fused • Extremely compact
amenities via solar energy. Includes chapters on Output voltage: 13.8V dc and rugged • High efficiency
lighting, refrigerators, generators, 240V appliances and 25A
more. Also provided are selection guides for panels, Current max: 10A 20A RRP 2+ 4+
batteries and equipment as well as easy wiring & <20mV
installation diagrams to follow. 74 pages. Current continuous: 8A >89% 59.95 55.00 48.00
Collyn Rivers <20mV p-p 135.00 125.00 115.00
Line regulation: <15mV
9
Price Each Efficiency: >88%
B 2325
Ripple: <12mV p-p
Manson® Heavy Duty Electronic 12V Battery Isolator
Price Each
M 8162 10A
M 8168 25A
Low Battery Cut Off Module (12V/24V)
Features • Solid state - no moving Compatible with both 12 and 24V batteries, 12V cut off point: 9-10V
parts • Low standby current and this cut off module prevents deep discharge of 24V cut off point: 19.2-20.3V
voltage drop • Suits most lead acid SLA backup batteries in security & UPS Dimensions: 60W x 45D x 22Hmm
batteries • Over temperature, over backup systems. This ensures longer battery
voltage, over current and low voltage service life. Simple in-line connection between
protection • Single or dual battery battery and control panel. Cut off point is
use • Manual override option adjustable between 9-10V in a 12V system or
19.2-20.3V in a 24V system. A master on/off
switch is also provided for disconnecting the
battery from the control panel.
Designed for use in dual battery systems eg. a main battery and an auxiliary battery. Price Each RRP 2+ 4+
The auxiliary battery can be connected to a load, such as a camping fridge, while the M 8550
main battery is isolated and not subject to any current draw. This allows you to start 32.95 31.50 30.00
your vehicle using the main battery if the auxiliary battery is flattened by the load. Au-
tomatically connects the auxiliary battery for charging once the main battery reaches Important Note For All Customers !
the selected cut in voltage and disconnects it from charging when the main battery
falls below the selected cut off voltage. May also be used with a single battery, operat- Our electronic enthusiast staff are generally able to offer valuable
ing as a low voltage cutout to prevent over discharge.
advice as to applications of our products and components.
SPECIFICATIONS Cut in: Adjustable 12.9-13.8V dc However we cannot be held responsible for any errors, or
Max output current:
Continuous output current: 110A Cut out: Adjustable 10.5-13.0V dc misunderstandings which may arise from such advice. We are
Voltage drop (main to aux batt.): 100A
300mV Operating temperature: -40 to +60°C not chartered engineers and do not charge for any technical
Dimensions (mm) 222 x 75 x 50
Price Each RRP 2+ 4+ opinions offered. We invite customers to seek independent
N 2104
119.00 109.00 95.00 professional assistance on complex circuits or applications.
www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999
All prices shown are RRP inc. GST. Green Energy & Lighting 227
About Our Floodlight Range LED Floodlights
Beware of cheap inferior look-a-like products! After evaluating many High Power LED IP65 Rechargeable Weatherproof Floodlights
different models of floodlight from a dozen suppliers, we settled on this range.
They all offer true weatherproof casings, industrial strength powdercoating, new
stainless steel fasteners and glass facias. They have been extensively used by
commercial property developers and signage companies throughout Australia.
This range is sure to provide not only long service life, but excellent energy
savings compared to traditional floodlights.
High Power LED IP65 Weatherproof Floodlights
X 2320 X 2321
X 2310 10W X 2316 20W X 2318 50W These high power portable worklights are powered by a high capacity rechargeable
lithium battery, offering up to 6 hours use from a single charge. Each unit offers
These high power LED floodlights are ideal for domestic and superb light levels with very low power consumption and heat output. The circuit Green Energy & Lighting
commercial lighting applications. They offer superb light design employed ensures nearly full brightness for the full 6 hour run time period.
output with the very low power consumption and little heat Other cheaper models on the market gradually dim as battery capacity decreases.
output. Each floodlight is housed in a diecast metal IP65 They have a weatherproof casing with tough industrial powdercoating and stainless
weatherproof casing with tough industrial powdercoating steel hardware for rust free use outdoors. A glass facia protects the longlife, 50,000
and stainless steel hardware for rust free performance hour LED from the elements. They are ideal for worksites, construction, mechanics
outdoors. A glass facia protects the long life 50,000 hour and anywhere a lightweight, portable high powered light source is needed. Supplied
LED from the elements. 240V ac models are fitted with 3 with both a mains and car charger.
pin 1m mains lead, whilst the 12V/24V dc models have 1m
bare end fly leads. They are ideal for any outdoor lighting Beware of cheaper versions which we have found to be of poor quality light
purpose such as patios, sheds and car ports. output, far shorter run times and in some cases even leaked when placed in a
light rain shower!
SAA approved. Be wary of non-approved versions as our
testing showed cheaper models were poor quality, failed X 2328 X 2326 SPECIFICATIONS X 2320 X 2321
water resistant tests and produced lower light output. Voltage input: 12/24V dc 12/24V dc
Height 0.9m Battery: Li-Ion 7.4V 4400mAH Li-Ion 7.4V 8800mAH
For trades & renovators each floodlight may be fitted to the to 1.64m. Operating time: 6 hours 6 hours
X 2328 floorstand or X 2326 tripod making an excellent Charging time: 5 hours 4 hours
work lamp. Each include hardware for mounting lamp to the 490mm wide. Dimensions (mm): 146W x 176H x 233D 215W x 263H x 186D
stand. Note: Workstands do not suit 50W or 120W models. Weight: 1.32kg 2.1kg
Price Each RRP 3+ 6+
X 2320 10W 12/24V dc
X 2321 20W 12/24V dc 99.00 89.00 79.00
139.00 125.00 115.00
High Power LED IP54 PIR Weatherproof Floodlights 9
new
Model Watts Power Colour Dimensions (mm) Weight
X 2310 10W 12V dc Natural White 4000-4500K 115W x 135H x 84D 600g
X 2360 10W 24V dc Natural White 4000-4500K 115W x 135H x 84D 600g
X 2312 10W 240V ac Natural White 4000-4500K 115W x 135H x 84D 600g
X 2313 10W 240V ac Warm White 3000-3500K 115W x 135H x 84D 600g
X 2316 20W 12V dc Natural White 4000-4500K 182W x 158H x 105D 1kg
X 2362 20W 24V dc Natural White 4000-4500K 182W x 158H x 105D 1kg
X 2314 20W 240V ac Natural White 4000-4500K 182W x 158H x 105D 1kg
X 2315 20W 240V ac Warm White 3000-3500K 182W x 158H x 105D 1kg
X 2365 50W 24V dc Natural White 4000-4500K 288W x 140H x 109D 2kg
X 2317 50W 240V ac Warm White 3000-3500K 288W x 140H x 109D 2kg
X 2318 50W 240V ac Natural White 4000-4500K 288W x 140H x 109D 2kg
X 2319 120W 240V ac Natural White 4000-4500K 427W x 327H x 250D 7.5kg
Price Each RRP 3+ 6+ These high power LED floodlights are ideal for domestic and commercial security
Natural White 4000-4500K lighting applications. They offer superb light output with very low power consumption
and heat output. Housed in a diecast metal IP54 case with tough industrial
X 2310 10W 12V dc new 34.95 31.50 27.95 powdercoating and stainless steel hardware for rust free performance outdoors. A
X 2360 10W 24V dc 44.95 40.45 36.40 glass facia protects the long life 35,000 hour LED from the elements. The PIR is
42.50 38.50 34.15 mounted on an adjustable bracket which has 340 degrees of horizontal movement
X 2312 10W 240V ac new 59.95 53.95 48.50 and 90 degrees of vertical movement. Adjustments are provided for sensitivity and
X 2316 20W 12V dc new 59.95 53.95 48.50 time interval. Fitted with a 1m bare end mains lead. SAA approved.
X 2362 20W 24V dc 78.95 69.10 61.50 Note: Installation of this lighting should only be performed by a licensed electrician.
179.00 162.00 152.00
X 2314 20W 240V ac 179.00 162.00 152.00 MODEL X 2340 X 2344 X 2346
X 2365 449.00 405.00 360.00 Voltage input: 240V ac 240V ac 240V ac
X 2318 50W 24V dc new Colour: 4000-4500K 4000-4500K 4000-4500K
X 2319 50W 240V ac new Dimensions (mm): 115W x 135H x 84D 182W x 158H x 105D 288W x 140H x 109D
120W 240V ac new PIR range:
Weight: 12m 12m 12m
Warm White 3000-3500K 42.50 38.50 34.15 600g 1kg 2.9kg
78.95 69.10 61.50
X 2313 10W 240V ac new 179.00 162.00 152.00 Price Each RRP 3+ 6+
X 2315 20W 240V ac new 17.50 15.50 13.75 X 2340 10W 240V ac
X 2317 50W 240V ac new 50.50 45.50 40.50 X 2344 20W 240V ac 52.95 47.95 42.50
X 2346 50W 240V ac 86.95 78.25 69.50
X 2328 Floor stand 189.00 170.00 155.00
X 2326 Tripod work stand
Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au
228 Green Energy & Lighting All prices shown are RRP inc. GST.
Commercial Lighting 100 Watt High Bay Light & Reflectors
LED IP65 RGB Weatherproof Floodlights Shown fitted with
60° reflector.
new Plug and play! Upgrade to LED and
Fitted with 3 pin slash 80% off your
mains lead, no power & electrical
maintenance bills!
need for an
electrician.
Designed for permanent installation in areas where colourful feature lighting is X 2408 120°
required such as garden features, fountains, pool areas, retail shops etc. Each is
supplied with the same tough powdercoated all metal casing as our commercial
floodlight range with stainless steel hardware for rust free use outdoors. Includes an
infra-red remote control which allows brightness adjustment, colour choice and flash,
strobe and colour fade selection. Size: 115W x 87H x 81Dmm.
Price Each RRP 3+ 6+ new X 2406 60°
X 2350 10W 240V ac 54.95 49.50 44.00
X 2352 20W 240V ac 99.00 90.00 80.00
T8 (1200mm) 1800 Lumen LED Replacement Tubes A high power industrial high bay light designed for use in warehouses, exhibition
centres, workshops, indoor stadiums and gymnasiums. They use up to 80% less
Green Energy & Lighting This LED replacement for the popular T8 1200mm fluorescent electricity than traditional high bay lighting, offering venues a significant annual saving
light uses up to 80% less electricity, plus they offer added on their operating costs. The long LED element lifetime of >35,000 hours also
environmental benefits. Used primarily in offices & factories eliminates costly electrician call out fees for lamp replacements. This could equate to
these LED tubes can drastically cut your electricity bill in the thousands of dollars in savings over the life on an LED lamp. Making the switch to LED
long term. Not only are they far superior in power consumption to fluorescent lighting, is a cost effective decision for commercial buildings, retail outlets and strata
they also eliminate the need for costly electrician call out fees for lamp replacements. companies. The 100W LED driver produces a cool white light output and may be
This could equate to thousands of dollars in savings over the life of an LED lamp. paired with either 60° or 120° reflectors depending on the ceiling height.
Making the switch to LED is a cost effective decision for commercial buildings, retail
outlets and strata companies. Safety type tube to meet Australian Standards. SPECIFICATIONS Cool White (6000K) Input voltage: 100-277V ac
Includes LED starter (this must be installed in place of the fluoro starter in the light Colour: 100 Watts
fitting prior to installation). Rated power: >75 Weight: 6.35kg
CRI: 9000lm
Note: Designed for use with popular iron core ballasts (fittings with starters). Not for use Lumens: Dimensions (60° ref.): 610H x 420Ømm
9 with electronic ballasts. These will need to be bypassed. Dimensions (120° ref.): 610H x 488Ømm
Features • Flicker free performance • Instantaneous start-up • 1800 lumens output Price Each RRP 2+ 4+
• Quality Epistar® LEDs • In excess of 30,000 hours life • Direct replacement for standard X 2405 LED Driver Unit
fluorescent tubes • DIY no electrician required • Includes LED starter. X 2406 60° Reflector 649.00 585.00 519.00
X 2408 120° Reflector 39.95 35.95 31.95
39.95 35.95 31.95
Marine Grade Stainless Steel IP65 GU-10 Up/Down Light Fittings
Price Each RRP 4+ 10+ 10 year
warranty
X 2066 Cool White 5800-6800K 39.95 37.50 33.95
39.95 37.50 33.95 X 2330 X 2332
X 2068 Natural White 3750-4500K new
40 Watt LED Wall Washer Light
X 2335
new These popular outdoor wall lights are seen in many of todays modern designer homes.
Ideal for effect lighting around driveways, entrances and courtyards. Adjustable model
These offer is equipped with a ball joint stem, ideal for garden feature lighting. IP65 weatherproof
significant power design constructed from marine grade 316 stainless steel. Each fitting suits GU-10
savings over older lamps, allowing you to choose a suitable beam width and lamp wattage to suit your
style power guzzling, installation. Each unit is supplied with GU-10 halogen globe(s), they can be easily
heat generating wall switched out for LED versions if required. 59mmØ casing with 78mmØ base. 240V ac
input. Note: Installation of this lighting should only be performed by a licensed electrician.
washers.
Commonly used in retail stores and reception areas this powerful 4000 lumen LED Features • Marine grade 316 stainless steel • IP65 weatherproof rated • Heavy duty 4mm
produces a cool white light. It features integral spring loaded clips which clamp to the wall thickness • Includes GU-10 halogen globe(s) • Easy wire base junction design • Glass
ceiling tile surface for a neat flush mount finish. Angle can be adjusted after globe facias • 10 year warranty (fitting only).
installation. Fitted with 1.5m flylead and 3 pin plug for direct connection to GPO.
Dimensions: 240W x 153L x 105Dmm. SAA approved. Price Each RRP 4+ 6+
X 2330 Dual up/down light
Price Each RRP 4+ 10+ X 2332 Single down light 129.00 115.00 105.00
X 2370 5500K Colour X 2335 Adjustable 109.00 99.00 89.00
199.00 179.00 159.00 119.00 109.00 95.00
www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999
All prices shown are RRP inc. GST. Green Energy & Lighting 229
LED Downlights
Genlamp® LED Lamp Range Genlamp® GU-10 6 Watt 240V AC LED Lights
TM
Incorporating the very latest in LED technology Genlamp® represents a new Suitable for GU-10 light fittings with 240V ac input
standard of excellence with their range of lighting. With colour rendering index voltage. MR-16 globe size. Not suitable for
(CRI) greater than 80, increased brightness efficiency and linear beam disper- dimmers. No transformer required.
sion, the resultant lighting fidelity is very natural and compares favourably with
both solar and incandescent illumination. We believe they will provide an emi- GENERAL SPECIFICATIONS GU-10
nently suitable substitute for energy hungry halogen lighting. The savings pos- Fitting: < 60mA
sible with power consumption and the ultra long lamp life will be considerable. Current draw: >20,000hrs
Life span:
Key benefits: Mounting depth (to terminals): 47mm
• Lower power consumption - Up to 80% reduction compared with halogen.
• Up to 50,000 hour minimum lifetime for lower electrcial maintenance bills. Model Input Colour Temp Power Luminous Flux Beam
• Less heat - Reduce airconditioning costs in your home or business. X 2260 100-240V ac 5300 - 7000K 6W 350 lumens 30°
• Less landfill due to extended operating life. X 2261 100-240V ac 2600 - 3300K 6W 320 lumens 30°
X 2264 100-240V ac 5300 - 7000K 6W 330 lumens 45°
X 2265 100-240V ac 2600 - 3300K 6W 270 lumens 45°
Genlamp® GU-5.3/MR-16 LED ‘Dimmable’ 8W Globes Price Each 30° Cool white RRP 4+ 10+
X 2260 30° Warm white
X 2261 45° Cool white 19.95 18.95 17.50
X 2264 45° Warm white 19.95 18.95 17.50
X 2265 19.95 18.95 17.50
19.95 18.95 17.50
Model: X 2290 X 2292 MR16 Light Fittings
Input voltage: 12V 12V
Current draw: new
Colour temperature: < 700mA < 700mA
Luminous flux: 3000K 3000K
Beam angle:
Life span: 530 lumens 438 lumens
36° 60º
50,000hrs 50,000hrs
Features premium quality Japanese Nichia® LEDs for excellent light output X 2000C X 2001 X 2002A Green Energy & Lighting
and reliability.
These high quality aluminium diecast frame fittings incorporate a floating lamp holder
An economical MR-16 LED downlight designed to produce the equivalent light output with a quick release front for easy globe replacement. Adjustable gimbal directs the
to a 50W halogen. These latest design LED globes offer savings of up to 80% over tra- light to a desired area. ie. paintings, planter boxes, statues etc. They are very easy to
ditional halogen lighting. For a $25 investment you could save up to $600 on your install with the integral spring steel clips. LED lamps shown for illustration purposes -
power bill per globe changed over its long life time. fitting only. Note: Installation of this lighting should only be performed by a licensed electrician.
IMPORTANT: If using with a dimmer only an electronic transformer with a trailing edge or univer-
sal dimmer will be suitable. Iron core (magnetic) transformer can only be used without a dimmer.
Price Each 36º Warm White RRP 4+ 10+
X 2290 60º Warm White
X 2292 24.95 22.40 19.90
24.95 22.40 19.90
Price Each Hole Cutout RRP 4+ 10+
X 2000C 72mm
Genlamp® GU-5.3/MR-16 LED ‘Dimmable’ 5W Globes X 2001 Fixed light fitting white 90mm 6.95 6.60 6.30
X 2002A Gimbal light fitting silver 95mm
Suitable for use with leading edge light dimmers. Gimbal light fitting white 7.95 7.65 7.00 9
7.95 7.65 7.00
GENERAL SPECIFICATIONS Genlamp® Bayonet & Screw Fitting 240V AC LED Lights
Fitting:
Current draw: MR-16 Suitable for use in standard household light fittings,
Life span: 500mA table and reading lamps. No transformer required. Not
Colour rendering index: >40,000hrs suitable for use with lighting dimmers. Warm white.
>80
Model Input Colour Temp Power Luminous Flux Beam Model 7 Watt 10 Watt
X 2206E 10-15V ac/dc 2850 - 3050K 5W 320 lumens 60° 60W
X 2230A 10-15V ac/dc 5000 - 5650K 5W 400 lumens 40° Incandescent equivalent: 40W
90-260V ac
Input voltage: 220-240V ac 10W
Power consumption: 7W 2800-3200K
650 lumens
Price Each RRP 4+ 10+ Colour temperature: 2800-3200K
X 2206E 90°
X 2230A 19.95 18.95 18.15 Luminous flux: 385 lumens > 40,000hrs
19.95 18.95 18.15
5W 60° Warm white Beam angle: 90°
5W 40° Cool white
Life span: > 40,000hrs
12 Volt DC GU5.3/MR-16 LED 1W Globe Price Each 7W Edison Screw warm white RRP
X 2271 10W Edison Screw warm white
Fitting: MR-16 X 2273 7W Bayonet warm white 12.50
Input voltage: 10.5-15.8V X 2281 10W Bayonet warm white 14.95
Current draw: X 2283 12.50
Colour temperature: < 125mA 14.95
Luminous flux: 9500K
Beam angle: Great for caravan !Important Note For Wholesale Customers
Life span: 55 lumens & boat lighting
35° All prices listed in this catalogue are RRP “retail” prices. To
100,000hrs access our competitive wholesale pricing scheme apply for an
Price Each Cool White RRP 4+ 10+ account via www.altronics.com.au or phone 1300 780 999.
X 2150
11.95 10.75 9.60
Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au
230 Green Energy & Lighting All prices shown are RRP inc. GST.
X 2007
Downlights
Dimmable Gymbal LED Lighting Kits GU-10 Light Fittings
X 2089 X 2086
Quality Sharp® COB LED module for long service life. X 2006
9 Watt models provide equivalent output to a 50W halogen globe but at 1/8th
Suits GU-10 lamps for direct connection to 240V ac power source. No transformer
the power consumption. required. These high quality aluminium diecast frame fittings incorporate a floating
lamp holder with a quick release front for easy globe replacement. Adjustable gimbal
Thousands sold to Australia’s premier home builders! Complete All include directs the light to a desired area. ie. paintings, planter boxes, statues etc. They are
LED downlight kits featuring an adjustable gymbal fitting with transformer and very easy to install with the integral steel spring clips. LED’s shown for illustration
high efficiency, 35,000 hour rated, Sharp® COB LED. Also purposes - fitting only.
includes high efficiency mains transformer with 1.8m lead. Ideal mains lead. Note: Installation of this lighting should only be performed by a licensed electrician.
high efficiency replacement for halogen lighting or as part of a
new installation. 70mmØ ceiling cutout. SAA approved. Price Each Gimbal light fitting silver Hole Cutout RRP
Note: installation should only be performed by a licensed electrician. X 2006 Gimbal light fitting white 90mm
X 2007 90mm 12.95
Price Each RRP 4+ 10+ 12.95
White Housing
X 2084 Warm White 5W 60° (310 lumens) new 39.95 35.95 31.95 Electronic Halogen Lighting Transformers
X 2086 Warm White 9W 60° (550 lumens) 49.95 44.95 39.95
X 2088 Natural White 9W 60° (550 lumens) 49.95 44.95 39.95
Silver Housing
X 2089 Warm White 9W 60° (550 lumens) new 49.95 44.95 39.95
Green Energy & Lighting 10 Watt Dimmable Low Profile LED Lighting Kit
new Includes Suitable for use with lighting up to a total of 60W (X 2104A) or 105W (X 2123A) these
transformer and ultra compact electronic lighting transformers are suitable for halogen lighting instal-
lations. Their compact design fits through the ceiling hole, making for easy termina-
mains lead. tion. Screw terminals for input and output. Moulded covers ensure safe cable
terminations. Suitable for use with leading & trailing edge dimmers. 1.8m mains lead.
9 This low profile dimmable LED features a fully sealed design for installations requiring
X 2142: This downlight connection lead allows you to connect multiple lights to a
energy efficiency or Green Star rating. The 10W multi LED module offers superb single transformer.
clarity and light output and is compatible with most leading and trailing edge dimmers. Note: Installation of this product should only be performed by a licensed electrician.
The low profile design features a recessed surround and is ideal for use in ceilings with
limited internal space. Includes mains transformer with 1.8m lead. Ideal replacement Please Note: Electronic transformers have a distinct advantage over standard transformers in
for halogen lighting or as part of a new installation. 82-100mmØ ceiling cutout. 42mm that the halogen lighting can be controlled by the use of conventional dimmers thus making it
deep. SAA approved. Note: installation should only be performed by a licensed electrician. the best choice for use in installations of boardrooms, entertaining areas, displays, etc.
Price Each RRP 4+ 10+ Price Each RRP 4+ 10+
X 2092 Warm White 10W 60° (750 lumens) X 2104A 20-60 Watt electronic
39.95 35.95 31.95 11.95 10.75 9.55
X 2123A 35-105 Watt electronic 15.95 14.35 12.75
X 2142 Downlight connection lead 2m
4.95 4.50 4.00
Energy Saving 35W Halogen Lighting Kit
Electronic 12 Watt LED Lighting Transformer
SAA Approved This ultra compact LED lighting new
transformer provides a constant voltage
A complete halogen downlight kit featuring a white gymbal fitting. Supplied with an output suitable for powering 12V high Note: Installation of this product should only
energy saving 35 Watt halogen globe (which is equivalent to a regular 50W globe) and power LED globes. High efficiency be performed by a licensed electrician.
high efficiency mains transformer with 1.8m lead. 60° beam. 92mmØ ceiling cutout. circuitry ensures low power usage in
Note: Installation of this lighting should only be performed by a licensed electrician. both home and commercial
installations. Supplied with 1.8m 2 pin
mains lead. Size: 42W x 116L x
27Hmm. Not suitable for use with
dimmers.
X 2142: This downlight connection lead
allows you to connect multiple LEDs to
a single transformer (LED rating should
not exceed 5W).
Price Each RRP 4+ 10+ Price Each RRP 4+ 10+
X 2082 X 2125A 12 Watt electronic
16.95 15.30 13.60 X 2142 Downlight connection lead 2m 18.95 17.10 15.20
4.95 4.50 4.00
www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999
All prices shown are RRP inc. GST. Green Energy & Lighting 231
12 Volt LED Adhesive Strip Lighting On Reels Strip Lighting
12 Volt RGB LED Adhesive Strip Lighting Kits
IP28 Indoor Type IP65 Outdoor Type
SPECIFICATIONS 5050 type
Input voltage: 12V dc
Current per m: 420mA*
LEDs per m: 60
This LED strip lighting on reels is remarkably easy to install in virtually any length you X 3218 *Maximum rating - current draw is lower
desire. The strips can be cut every 3 LED’s (or 50mm). Great for feature lighting
around cabinetry, walkways and alcoves. Backed with 3M adhesive tape for easy in- depending on colour displayed at the time.
stallation. IP65 models are encapsulated in a flexible plastic coating. All reels sup-
plied with fly lead connections. For lengths longer than 5m, strips can be soldered LED strip lighting with red, green, blue variable colours. Kits available in indoor or
together. 60 LED’s per metre. Sold per 5m roll. weatherproof outdoor versions. A controller & remote are available separately for
varying timing of the colour change. Each strip features connectors at both ends for
Note: Care should be taken when cutting waterproof LED strips to ensure the protective casing daisychaining multiple strips together. Remote control offers 16 selectable colours,
does not let moisture in. We recommend the use of X 3224/X 3225 protective end caps with sili- adjustable brightness, speed of colour change, and 4 effects (flash, strobe, fade and
cone sealant to prevent moisture ingress. smooth transition). Controller is rated at 6A max output, this means you can connect
up to 14m of lighting per controller. Backed with 3M adhesive tape for easy
SPECIFICATIONS 3528 type 5050 type installation. IP65 model is encapsulated in a flexible plastic coating. 4-pin connection
Input voltage: 12V dc 12V dc lead and protective end capping sold separately. 5050 chip size. Sold per 5m roll.
Current per m: 1.2A
350-420mA Note: Care should be taken when cutting waterproof IP65 LED strips to ensure the protective
casing does not let moisture in. We recommend the use of X 3221A waterproof connection lead
Indoor (Open Frame) Type and end caps with silicone sealant to prevent moisture ingress.
Price Per 5m Roll RRP 3 Rolls 5 Rolls Price Per 5m Roll RRP 3 Rolls 5 Rolls
X 3213A IP30 Indoor RGB (10mm wide) 54.95 49.50 44.00
3528 Chip Size - 8mm wide 23.95 21.60 19.20 X 3214A IP65 Outdoor RGB (12mm wide) 64.95 58.50 52.00
X 3200A IP30 Warm White 23.95 21.60 19.20
X 3202A IP30 White Price Each RRP 2+ 4+
44.95 40.50 36.00 X 3220A Connection lead & end cap to suit IP28 strips 5.95 5.25 4.65 Green Energy & Lighting
5050 Chip Size - 10mm wide 44.95 40.50 36.00 X 3221A Connection lead & end cap to suit IP65 strips 7.95 7.25 6.75
X 3208A IP30 Warm White X 3218 Controller Unit & IR Remote 14.95 13.50 12.00
X 3210A IP30 White
Outdoor (Waterproof) Type
Price Per 5m Roll RRP 3 Rolls 5 Rolls Stainless Steel LED Deck Lighting Kit
3528 Chip Size - 8mm wide 33.95 30.60 27.20
X 3204A IP65 Warm White 33.95 30.60 27.20
X 3206A IP65 White
54.95 49.50 44.00
5050 Chip Size - 10mm wide 54.95 49.50 44.00
X 3211A IP65 Warm White
X 3212A IP65 White
Price Each RRP 2+ 4+
X 3224A End caps (2) to suit 5050 IP65 strips 2.50 2.25 2.20
X 3225A End caps (2) to suit 3528 IP65 strips 2.50 2.25 2.20
9
12 Volt Magic Colour LED Adhesive Strip Lighting Kits Designed to accent your outdoor entertaining area, this 6 pack of weatherproof LED
deck lights are supplied with a weatherproof 240V ac transformer, power distribution
bar and 6m of cabling per LED. The mains transformer is fully sealed and IP68 rated,
whilst the power distributor has sealed screw fit connectors for a reliable weatherproof
connection. Each deck light requires a 28mm hole and measures 33Øx19D mm.
new Price Each RRP 4+ 6+
X 2336 White (Pack of 6) 149.00 135.00 120.00
Weatherproof IP67 LED Step / Courtesy Light
SPECIFICATIONS 5050 type A completely waterproof LED designed to be
flush mounted into steps, decking, flooring and
Input voltage: 12V dc cabinetry. The LED housing is constructed
from tough clear plastic and can be safely
Current per m: 500mA* stepped on without damage. Max material
thickness 15mm. Requires 22mm hole.
LEDs per m: 30 12V dc nominal rating. Power consumption
less than 1W. Size: 37Ø x 26Dmm.
*Maximum rating - current draw is lower depending on
colour displayed at the time. new
This LED strip features 5050 size LEDs which can produce a huge array of colours Price Each RRP 4+ 10+
and visual effects with adjustable chaser effects, speed and brightness - far more X 2404 Warm White
than the standard RGB strips shown above (check out the YouTube video on our 12.95 11.65 10.35
website to see it in action!). Stripping is housed in 15 x 4mm rectangular plastic
tubing which is rated at IP65 (tubing can be removed if required). Each roll is Got an electronics question?
supplied with a controller and IR remote control which allows adjustment of all effects
and colours. Sold per 5m roll. Try the reference section at the back of this catalogue. Packed
Price Per 5m Roll RRP 2 Rolls 3 Rolls with plenty of handy formulae, books, tips and answers.
X 3216 IP65 Outdoor RGB (15mm wide) 89.00 80.00 71.00
Price Each RRP
X 3228 Rubber fixing clips & screws Pk 10 5.95
Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au
232 Green Energy & Lighting All prices shown are RRP inc. GST.
4WD & Vehicle Lighting
4WD Lighting Range With CREE® LEDs 25 Watt IP67 LED Marine Light
Every model in the Altronics vehicle lighting range uses CREE® LEDs for This stylish LED flood beam light is the perfect
superior performance and long life. Each LED enclosure is completely addition to your boat to light up the water at night
weatherproof and is coated in industrial strength powdercoating & fitted with when fishing or cruising. The 1800 lumen CREE®
stainless steel hardware to ensure they look good on your vehicle for many LED employed is housed in a heavy duty diecast
years to come. case coated in tough industrial white powdercoat.
Rated for an amazing 50,000+ hours use! The front
60 Watt IP67 LED Automotive/Marine Bar Light lens is made from toughened glass and is a flood new
beam type. Fitted with 450mm flylead with durable
UV stabilised outer sheath. Includes 304 rated RRP 3+ 5+
stainless steel bracket & mounting bolts. 9-32V dc
operation, 2A current draw. Size: 106Ø x 91D mm. 139.00 125.00 115.00
Price Each
X 2900 Flood Beam
new 10 Watt IP67 LED Mini Automotive Work Light
A great low profile lighting solution for 4WDs, utes and boats.
With six in-built CREE® pencil beam LED modules, this compact bar light will shed light A handy miniature 10W work light housed in a new
wherever you need it. Great for mounting on utility bars, roof racks etc on 4WDs and weatherproof IP67 rated diecast housing. Features a
boats. The 50,000+ hour rated LED module produces over 4080 lumens of light, and CREE® 50,000 hour LED element with low power
travels a distance up to 800m. Fitted with UV stabilised 450mm flylead and 2 pin consumption and excellent light performance - over
weatherproof Deutsch® connector for easy integration into your vehicles wiring system. 750 lumen output! Fitted with 400mm flylead with
Includes 304 rated stainless steel bolts and adjustable aluminium mounting brackets. durable UV stabilised outer sheath. Prism lens offers
9-48V dc operation, 5A current draw (12V). Size: 281W x 64H x 92D mm. a wide beam spread. A great addition to the 4WD for
beach fishing or exterior lighting for caravans, heavy
Price Each RRP 2+ 4+ machinery and trucks. 55Ø x 65D x 86Hmm.
X 2912 Spot/Pencil Beam Includes bracket & 304 grade stainless steel
X 2913 Flood Beam 249.00 225.00 200.00 hardware. 9-60V dc operation, 750mA current draw.
249.00 225.00 200.00
Green Energy & Lighting 100 Watt IP67 LED Automotive/Marine Bar Light Price Each RRP 2+ 4+
X 2908 Flood Beam
44.95 39.95 35.95
A great low profile lighting solution for 4WDs, utes and boats. new 12V MR-11 Bulkhead Caravan / Boat Light
With ten in-built CREE® LED modules, these compact bar lights will shed light A compact 12V halogen light fitting with
wherever you need it. Great for mounting on utility bars, roof racks etc on 4WDs and on/off switch. Perfect for adding extra lighting
boats. The 50,000+ hour rated LED module produces over 8600 lumens of light, in your caravan or boat cabin. Excellent for
the equivalent of turning on 28 of our X 0215 LED security torches at once! Fitted with bedside or overhead light for reading or
UV stabilised 450mm flylead and 2 pin weatherproof Deutsch® connector for easy lighting pantry and cooking areas. Also ideal
for 4WDs, recreational vehicles, service vans
9 integration into your vehicles wiring system. Includes 304 rated stainless steel bolts etc. Includes a 10W MR11 halogen globe.
Supplied with bare wire leads.
and adjustable aluminium mounting brackets. 9-48V dc operation, 6.25A current draw
(12V). Size: 440W x 64H x 92D mm. Features • MR11 10W Halogen globe • 12V operation • Inbuilt on/off switch • Adjustable
light angle • Dimensions: 80Ø x 45H mm
Price Each RRP 2+ 4+
X 2906 Spot/Pencil Beam Price Each RRP 4+ 10+
X 2907 Flood Beam 399.00 359.00 319.00 X 2400
399.00 359.00 319.00 X 2020A Replacement globe to suit 10.95 10.45 9.95
9.95 9.45 8.95
40 Watt IP67 LED Automotive Lights
X 2902 X 2904 new Flush Mount Low Profile 3W LED Lamp
Tough high intensity LED lights for mounting on 4WD bars, roofracks and bumpers. A 12 to 24V dc LED lamp designed for flush RRP 4+ 10+
These CREE® 50,000+ hour rated LED modules are housed in a weatherproof IP67 mounting in cabinets. Ideal for portable
rated diecast housing, painted in a matt black industrial powdercoat. Both models installations such as caravans and RV’s but will 25.95 23.35 20.75
output 4000 lumens of light and are fitted with either a pencil beam spot lens or also suit low voltage domestic situations such
fresnel flood lens, which is constructed from toughened glass. All hardware used is as in kitchen cupboards & shelving. IP55
304 grade stainless steel, suitable for use outside in the elements. Fitted with 450mm rated. Max 200mA current draw. Requires
flylead with durable UV stabilised outer sheath. Includes bracket & mounting bolts. 9- 62mmØ mounting hole - press fit.
40V dc, 3A current draw. Size: 125Wx160Hx99D mm. Dimensions: 80Ø x 28Dmm
Price Each
X 2402 3W 40° Warm White
Price Each RRP 3+ 5+ Pre order online & pick up in store.
X 2902 Flood Beam
X 2904 Spot Beam 129.00 119.00 105.00 Our website offers convenient 24/7 online shopping - even if you
129.00 119.00 105.00 don’t need your order delivered. Simply select “pick-up” when
ordering and your goods will be ready to go when you arrive at
the store. Conditions apply
www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999
All prices shown are RRP inc. GST. Green Energy & Lighting 233
Magnifiers & Desk Lamps
Inspect-A-Gadget® LED Desktop Illuminated Magnifier Inspect-A-Gadget® Floor Stand
Inspect-A-Gadget® Jr. 2 year Adds mobility to your Inspect-A-Gadget®. Fitted
warranty with 5 castor wheels for added stability. Great for
ILLUMINATED MAGNIFIER beauty therapists, health professionals, work-
shops etc. Adds 78cm in height to your Inspect-
A-Gadget.
Suits LED models X 4200, X 4201 and our
old Fluoro models A 0970A, A 0971.
High luminance Ball joint head. Price Each RRP 2+ 4+
LED lamp A 0974 Floor stand with castors
89.95 84.95 79.00
Close up view 12x inset on 7 Watt LED Desk/Table Lamp
X 4204
This stylish LED table lamp provides light
The Inspect-A-Gadget Junior has been upgraded to LED. Now featuring 48 high wherever you need it with an adjustable new
brightness LEDs with 3500-4500K colour temperature for a natural light output. Two boom arm. Great as a reading lamp in the
models are available, both with 95mm magnifiers. A 3 dioptre with 12 dioptre inset or study or office. The touch power button RRP 4+
5 dioptre model for fine work. An essential addition to the workshop or study! Not provides three levels of brightness up to a
only is it extremely useful for reading tiny component markings or looking for dry maximum of 450 lumen. High efficiency, 44.95 40.50
joints or broken PCB tracks, but it’s perfect for stamp or coin collectors, model long life LED design produces very little heat
makers, jewellers and more! The adjustable arm and balljoint can be set to virtually for added comfort when working. LED colour new
any position and the magnifying head is equipped with a cover to prevent lens temperature has been carefully selected to 9RRP 2+ 4+
damage or dust build up. replicate daylight.
Dimensions: 354D x 275H x 140Wmm 36.50 32.85 29.20
Price Each RRP 2+ 6+ Green Energy & Lighting
X 4204 3 dioptre plus 12 dioptre inset Price Each
X 4205 5 dioptre 49.95 46.50 43.00 X 4225
55.95 52.00 48.00
8 Watt LED Desk/Table Lamp
Inspect-A-Gadget® LED Desk Mount Illuminated Magnifier
This stylish LED table lamp provides light wherever
Inspect-A-Gadget® LED you need it with an adjustable boom arm. Great as
a reading lamp in the study or office. The one
ILLUMINATED MAGNIFIER touch buttons provide three levels of brightness up
to a maximum of 357 lumen. High efficiency, long
2 year life LED design produces very little heat for added
warranty comfort when working. LED colour temperature
has been carefully selected to replicate daylight.
Dimensions: 300D x 350H x 100Wmm
Price Each
X 4220A
5W Adjustable Beam LED Security Torch
Tough all aluminium
construction
Great for PCB inspection Read fine print with ease! This heavy duty and powerful torch employs a 5 watt super bright white LED and has
adjustable beam focus. To adjust, simply twist the front bezel of the torch. The
New LED high brightness models provide a clear view with low power anodised aluminium case offers excellent protection. IP67 waterproof. Includes glass
consumption, less heat & longer life. Possibly the most useful device you could break bead on rear. Requires 3 x ‘D’ cell batteries. Up to 300 Lumens light output.
have in your workshop! They help to reduce eye strain when working on complex 335mm long.
PCBs etc. Manufactured for Altronics utilising 56 high brightness, white LEDs (colour
temperature 3,5000 - 4,500k). This enables the lamp to maintain the colours of Price Each RRP 3+ 5+
various objects as if illuminated by a natural light source. Uses are not only limited to X 0215
electronics, of course. They are also suitable for stamp and coin collectors, model 49.95 44.90 39.90
makers, embroiderers, jewellers and the like. The 130mmØ magnifying head is easily
set to virtually any desired position on its spring-loaded arm assembly. Simply clamps Exclusive Savings Direct To Your In Box
to your workbench or desk (up to 60mm thick). To add mobility to your lamp, simply
add an A 0974 wheeled floor stand (above right). Subscribe to our email newsletter to receive the latest info on
new kits, special stock offers & flyer sales. Subscribe online at
Price Each RRP 2+ 4+ www.altronics.com.au
X 4200 3 dioptre standard magnification
X 4201 5 dioptre for ultra fine work 95.00 85.50 76.00
99.00 89.00 79.00
Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au
234 Green Energy & Lighting All prices shown are RRP inc. GST.
Torches LED Torch Bluetooth Speaker Combo
Rechargeable Car Accessory LED Torch 1W LED Plus 4 LED Headband Torch
new
This tiny torch employs 7 high brightness LEDs and is Incorporates a powerful 1W white LED torch light, plus A powerful 1W LED torch and Bluetooth 3.0 streaming
recharged by your vehicles accessory socket. Great for a lower output 4 LED lamp. 3 Mode operation: bright speaker. Perfect for the comuting cyclist. Features an
map reading at night or shedding light on areas your 1 Watt torch, 4 LED lamp on, 4 LED lamp flashing in-built battery and charges via USB. 6-8hrs play time.
interior light doesn’t reach! Includes battery. (ideal for cyclists). Excellent for working in dimly lit Includes strap for handlebar mounting.
areas such as roofspaces, behind racks, equipment
Price Each RRP 2+ 4+ cupboards, or leisure activities such as bushwalking, Price Each RRP 2+ 4+
X 0205 12.95 11.70 10.40 fishing, cycling etc. Adjustable headband. Requires 3 X 5100 79.95 72.00 64.00
x 1.5V AAA batteries.
10 LED USB Gooseneck Lamp
9V Battery Blocklite® Torch
Price Each RRP 3+ 6+ new
X 0199 24.95 22.50 19.95
new 4 LED Weatherproof Headband Torch Features 10 high brightness white LEDs with a
graduated dimmer function. One touch on/off setting
A nifty LED torch that snaps onto any 9V battery to or touch and hold to dim up and down. Plug it into
provide light whenever you need it. Stash one in the your laptop or run it off a USB adaptor in your car.
glovebox or kitchen drawer. 6 high brightness LEDs. Ideal for DJ’s as an alternative to a mixing desk lamp.
Includes battery.
Price Each RRP 2+ 4+
D 0385 19.95 17.95 16.15
Price Each RRP 2+ 4+ Incorporates 4 high brightness white LEDs with an USB Gooseneck Lamp
X 0218 7.95 7.20 6.40 adjustable elastic headband. Light assembly features
a metal reinforced bracket and tilts down to direct A handy USB powered LED
Green Energy & Lighting 3W CREE® LED Adjustable Hand Torch light where you need it. Ideal for working in dimly lit lamp for working in the
areas such as equipment cupboards or leisure dark. Plug it into your
activities such as night fishing, hiking, cycling etc. laptop or run it off a USB
Includes two brightness settings and flashing mode. adaptor in your car. Ideal
Requires 2 x AAA batteries. IP68 rated. 152g weight. for DJ’s as a alternative to
Typical lighting distance, 70m. a mixing desk lamp. All
metal construction. 9mmØ
Price Each RRP 3+ 6+ LED
X 0202 19.95 18.00 16.00
Price Each RRP 2+ 4+
This compact yet powerful torch employs a 3 watt D 0384 9.95 8.95 7.95
super bright white CREE® LED and has adjustable 2 In 1 LED Torch & Lamp Combo
9 beam focus. To adjust, simply twist and push the front Movement Activated Night Light
of the torch forward. The anodised aluminium case
offers excellent protection in the toolbox. Requires 3 x This compact plug in light is
ideal for illuminating
AAA batteries. Includes belt pouch. Up to 100 Lumens hallways, stairs and
bathrooms at night. No
light output. 120mm long. need to flick on the lights
and disturb others in your
Price Each RRP 4+ 10+ house. Permanent on or
X 0209A 32.95 31.50 29.95 automatic movement
activated operation (light
Operates as a standard LED hand torch switches off after 2
or slide out the 16 LED work lamp. minutes).
Solar Powered / Wind Up Dynamo Torch Ideal for camping, hiking or just working on the car!
This hand torch features a slide out head which
reveals a high brightness 16 LED work lamp which Price Each RRP 2+ 4+
can be suspended for hands free working. Features a X 0252 14.95 13.45 12.10
rubberised non-slip finish. Requires 3 x AAA batteries
(not included). Top of the case is fitted with hanging
hook and magnets. Size: 40D x 66W x 104Lmm.
Price Each RRP 2+ 4+ Night Light With Rechargeable Torch
X 0207 13.95 12.50 11.15
A night light and recharge-
This compact light weight torch does not require bat- Keyring Laser Pointer able torch combination de-
teries. The torch is recharged by the solar panel or by signed for use in power
turning the dynamo handle. Great for the glovebox for blackouts. When power fails,
road side emergencies, the meterbox during blackouts the torch lights up automati-
and for hiking, fishing and camping trips. cally so you can quickly find
your way. When mains
Price Each RRP 4+ 10+ new power is available, the night
X 0211 9.95 9.00 8.00 light automatically switches
on when it’s dark. No batter-
www.altronics.com.au Intense beam - travels up to 50m! This compact key- ies required.
chain laser pointer is ideal for lectures, seminars &
Online ordering, 24/7, 365 days a year. building sites. Includes batteries. <1mW output.
Price Each RRP 4+ 8+ Price Each RRP 2+ 4+
A 0205A 14.95 12.95 11.50 X 0250 19.95 18.00 16.00
www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999
All prices shown are RRP inc. GST. Power 235
Powertran® Plugpacks
Powertran® Fixed Voltage Regulated DC Plugpacks Plugpack Accessories
Interchangeable Tips
All Powertran® plugpacks are energy authority &
MEPS green energy approved. The efficiency of
plugpacks has increased dramatically in recent
years offering excellent reduced operating costs
and lower carbon footprint.
1 2 3 4
Price Each Voltage Current Input Tip Tip Polarity Case RRP 2+ 4+ •• •
M 8903 5V dc 1A 100 - 240V ac Fixed 2.1mm + 1 15.95 14.50 13.00 SH IJ
M 8904 5V dc 2A 100 - 240V ac Fixed 2.1mm + 2 18.95 17.50 16.00
M 8909A 5V dc 3A 100 - 240V ac 4 22.90 20.90 18.50 ••
M 8911A 5V dc 4A 100 - 240V ac 2.1mm +/- 3 23.95 21.90 20.50 E E (90°) G A
M 8916 6V dc 1A 100 - 240V ac Fixed 2.1mm + 1 17.95 16.50 15.00
M 9237B 9V dc 100 - 240V ac 1 17.95 16.50 15.00 • U
M 8925A 9V dc 0.67A 2.1mm +/- 4 22.90 20.90 18.50 M DN
M 9260A 10V dc 2A 240V ac 2.1mm +/- 1 21.95 19.95 18.00
M 9272B 12V dc 1.1A 90 - 264V ac 2.1mm +/- 1 17.95 16.50 15.00 • Supplied with multi-voltage
M 9273A 12V dc 0.5A 100 - 240V ac 2.1mm +/- 1 16.95 15.50 14.00 plugpacks. DC plugs size shows
M 8931A 12V dc 0.5A 100 - 240V ac 2.1mm +/- 2 19.95 18.00 16.00
M 8932A 12V dc 1A 100 - 240V ac Fixed 2.1mm 2 19.50 17.50 15.50 inside Ø x outside Ø.
M 8934A 12V dc 1A 100 - 240V ac 2.1mm + 4 21.95 19.75 17.50
M 8936 12V dc 2A 100 - 240V ac Fixed 2.1mm +/- 4 21.50 19.35 17.20 Please note our range of tips are
M 8937 12V dc 2A 100 - 240V ac 2.1mm 3 29.95 26.90 24.90 designed to suit the Powertran
M 9357A 18V dc 3A 100 - 240V ac Fixed 2.1mm + 4 25.90 23.90 21.90 range, other brands may differ in
M 9391A 24V dc 2.1mm +/- 4 24.95 22.50 19.95 design and may not be compatible.
M 9393 24V dc 1.33A 240V ac 2.1mm 27.95 25.20 22.40
1A 240V ac 2.1mm + 3 new
1.5A 240V ac 2.1mm +/-
+/-
+/-
+/-
Powertran® Fixed Voltage AC Plugpacks P/No Plug Size
M 9186 Type 0.75 x 2.35
Supplied with interchangeable 2.1mm dc jack where noted. M 9187 1.35 x 3.5
Energy authority & MEPS approved. M 9188 S• 1.7 x 4.0
M 9189 H• 1.75 x 4.75
Price Each Voltage Current Input Tip Tip Polarity 1 2 2+ 4+ M 9190 I• 2.1 x 5.5
M 9233 9V ac 1.33A 240V ac 2.1mm +/- 20.50 18.50 M 9171 J 2.1 x 5.5 (90°)
0.5A 230 - 240V ac 2.1mm +/- Case RRP 17.50 16.50 M 9191 E• 2.5 x 5.5
M 9265A 12V ac 230 - 240V ac 2.1mm +/- 2 21.95 21.50 20.00 M 9192 E 2.5
1A 230 - 240V ac Bare ends +/- 1 18.95 22.45 20.20 M 9194 G• 3.4 x 5.5 (1.0 pin)
M 9267A 12V ac 1.83A 240V ac Bare ends na 1 22.95 21.50 19.15 M 9195 A 1.5 x 5.0
1.38A 240V ac Bare ends na 24.95 22.50 19.95 M 9197 U 2.1 x 5.0
M 9268 12V ac 1.38A 240V ac Bare ends na 2 new 23.95 19.80 17.60 M 9198 M• 1.5 x 5.5
0.9A 240V ac Bare ends na 1 24.95 28.50 26.00 D
M 9325A 16V ac 1.87A 2 21.95 N Power
1 29.95
M 9332A* 16V ac 1
M 9379A 24V ac Price Each RRP 10+ 25+
All
M 9381 24V ac 1.60 1.40 1.20
*Earthed plugpack
DC Multi-Voltage 12V & 24V DC Powerpacks 10
Provides regulated multi-voltage output of 12
5, 6 7.5, 9, 12, 13.5 and 15V dc. Sup-
plied with 6 reversible tips to suit a multi- Super-compact regulated power supplies. 100-240V ac input. Energy authority ap-
tude of appliances. Energy authority proved & MEPS approved. All models except M 8942 are supplied with interchange-
approved. MEPS approved. Includes fig- able 2.1mm dc jack. M 8942 is supplied with a fixed 2.1mm dc jack.
ure ‘8’ to 2 pin mains lead. 100-240V ac
input. Dimensions: 136 x 70 x 37mm. Case 1 models: Require P 8404D fig ‘8’ lead. Dimensions: 99 x 44 x 31mm.
5V 6V 7.5V 9V 12V 13.5V 15V Case 2 models: Require P 8438 IEC lead. Dimensions: 167 x 65 x 40mm.
3A 3A 3A 3A 3A 2.4A 2.4A
Price Each Tips RRP 2+ 4+
M 8987A 3A E,G,H,I,M,S 42.95 40.90 38.00
Price Each Voltage Current Input Case RRP 2+ 4+
1 59.95 53.50 47.50
Multi Voltage AC To DC Plugpacks M 8939A 12V dc 5A 100-240V ac 2 79.00 72.00 64.00
1 49.00 44.00 42.00
Multi-voltage plug packs with front mounted M 8942 12V dc 9A 100-240V ac 2 89.00 82.00 75.00
adjustment switch. This prevents accidental change
of output voltage. Energy authority & MEPS M 8970B 24V dc 2A 100-240V ac 5.70
approved. M 9449A: 100-240V ac input. M 8980A 7.50
240V ac input only. M 8973 24V dc 5A 100-240V ac
3V 4.5V 6V 7.5V 9V 12V P 8404D Fig ‘8’ Power lead to suit
M 8980A 1.6A 1.6A 1.5A 1.2A 1A 0.8A
P 8438 IEC Power lead to suit
1 2 new Energy Authority Approved
Price Each Voltage Current Tips Case RRP 2+ 4+ All Powertran® power supplies carry approvals for electrical safety and MEPS
M 9449A 3, 4.5, 5, 6, 7.5, 9, 12V 1 19.95 18.50 17.00 efficiency standards for sale in Australia.
M 8980A 3, 4.5, 6, 7.5, 9, 12V 2 29.95 27.90 25.90
0.6A E,G,H,I,M,S
1.6A E,G,H,I,M,S
Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au
236 Power All prices shown are RRP inc. GST.
Mains Leads & Accessories 2 Pin 90° To IEC C7 Fig ‘8’ Appliance Lead 3 Pin Socket To IEC C14 Appliance Lead
Piggyback Mains Extension Leads
new
Low profile 2 pin plug for use behind flat screen TVs. Price Each RRP 10+ 50+
P 8420 10A 15cm 9.95 8.75 7.75
Heavy duty models feature thicker sheathing and Price Each RRP 10+ 50+
larger conductors. Ideal for tradespeople & installers. P 8423 2.5A 2m 7.95 6.95 5.95
Price Each RRP 4+ 10+ 3 Pin To IEC C19 Appliance Lead
P 8271A 2m new 7.50 6.75 6.00 3 Pin 90° To IEC C13 Appliance Lead
P 8272A 5m 11.95 10.90 9.90
P 8277A 10m 19.95 18.50 17.00
P 8279 Heavy Duty 10m 29.95 26.95 23.95
P 8282 Heavy Duty 25m 69.95 62.95 55.95
Piggyback to IEC C13 Mains Leads new Price Each RRP 4+ 10+
P 8442A 15A 2m 12.95 11.35 10.35
Low profile 3 pin plug for use behind flat screen TVs.
Price Each RRP 10+ 50+ IEC C20 To IEC C19 Appliance Lead
P 8427 7.5A 2m 8.95 7.95 6.20
Features a piggyback 3 pin mains plug to IEC plug. 3 Pin To IEC C13 Appliance Lead
Energy authority approved. Typically used to
daisychain power in lighting rigs etc. Price Each RRP 4+ 10+
P 8450A 15A 2m 23.95 21.95 19.50
Price Each RRP 10+ 50+ 10A 3 x 1.00mm2 conductor. 7.5A 3 x 1.00mm2 conductor. Powertran® Stepdown Transformers
P 8424 10A 2m 9.95 8.90 7.90
P 8425 10A 5m 11.95 10.90 9.90
P 8426 10A 10m 15.50 14.35 13.00
OEM Mains Leads With Bare Ends Price Each RRP 10+ 50+
P 8399 P 8417 10A 0.5m 6.95 5.90 4.90
P 8419 10A 0.75m 7.50 6.75 6.00
P 8410C 10A 2m 8.95 7.95 6.20
P 8438 7.5A 2m 7.50 6.75 6.00
P 8411 10A 5m 11.95 10.50 10.00
P 8400C 3 Pin To IEC C13 Appliance Lead
P 8405C
Converts 240V to 120V for powering US appliances on
P 8401C Australian mains. Fitted with US mains socket.
Power Price Each RRP 10+ 50+ Price Each RRP 4+
P 8412 10A 2m (clear plug) 8.95 7.95 5.50
M 8181 75VA 1.6A 49.95 46.95
10 P 8403C 3 Pin To 90° IEC C13 Appliance Lead M 8182 100VA 1.2A 75.00 70.00
M 8185 250W 2A 129.00 116.00
M 8187 500W 4.1A 229.00 209.00
M 8190 1000W 8.3A 369.00 335.00
Energy authority approved. All 2 metres long with bare 6 Way Surge Protection Board
ends. *P 8399: Ring earth terminal (5mm stud) with
bare active & neutral.
Price Each RRP 10+ 50+ Price Each RRP 10+ 50+
9.90 8.75 7.05
P 8399 7.5A 3 Pin* 5.20 4.65 3.80 P 8413 7.5A 2m 11.95 10.50 10.00
P 8400C 7.5A 3 Pin black 4.80 4.35 3.25 P 8414 10A 5m
P 8401C 7.5A 3 Pin white 4.15 3.75 2.80
P 8403C 7.5A 2 Pin black 3.70 3.30 2.20 Offers cheap insurance for your valuable appliances!
P 8405C 10A 3 Pin black 6.00 5.45 4.30 Includes surge and spike protection for 6 mains power
outlets up to 13,500 amps! Plus protection for a
2 Pin To IEC C7 Fig ‘8’ Appliance Lead IEC C13 To IEC C14 Appliance Lead telephone outlet. Includes combo on/off switch and
circuit breaker. 450 joules of energy absorption.
Price Each RRP 4+ 10+
P 8151 23.95 21.50 19.00
Price Each RRP 10+ 50+ Price Each RRP 10+ 50+ 8 Way Surge Protection Board
5.70 5.15 4.30 4.50 3.90 3.20
P 8404D 2.5A 1.8m 11.50 10.50 9.50 P 8422 7.5A 0.75m 7.80 6.80 5.40
P 8430 2.5A 5m P 8415A 7.5A 2m
3 Pin To IEC C5 Appliance Lead 3 Pin To Dual IEC C13 Appliance Lead
Offers cheap insurance for your valuable appliances!
Includes surge and spike protection for 8 outlets up to
13,500 amps! 450 joules of energy absorption.
Price Each RRP 10+ 50+ Price Each RRP 10+ 50+ Price Each RRP 4+ 10+
P 8406 2.5A 1.8m 6.35 5.60 4.85 P 8418 10A 2m (2 x IEC) 15.95 14.25 12.60 P 8266 19.95 18.90 17.90
www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999
All prices shown are RRP inc. GST. Power 237
Double Adaptors Energy Monitors & Power Boards
Energy Meter Surge Power Board Wireless Mains Power Monitor
P 8250 Provides three functions. Firstly an in-built energy
meter calculates running costs for your appliances.
P 8251 P 8102 Secondly, it saves energy by cutting standby power New low
usage to ‘slave’ devices when a ‘master’ appliance is price!
Price Each RRP 4+ 10+ turned off. Finally all outlets are surge protected up to
4.95 4.70 4.50 30,000 amps! 1050 joules of energy absorption. Monitor the running costs of up to three electrical
P 8250 Horizontal 4.50 4.30 3.95 appliances with this mains power meter. Consists of a
P 8251 Vertical 9.50 9.00 8.50 master base station which receives RF signals from
P 8102 Vertical surge protected remote mains socket senders up to 30m away. The
senders plug inline between your appliance and the
Mains Power Boards Features • Can operate as a standard power board ie; GPO. The master unit is programmed with the local
all outlets on • Calculates energy usage in kWh, dollars price per unit of electricity which then displays
and CO2 • One ‘constant’ power outlet for PVRs, DVD running costs. In-built memory for storing cumulative
recorder, telephone etc. • Surge protected costs. Includes clock with alarm function. Includes
base station and one GPO transmitter, 2 additional
Price Each RRP transmitters may be added. Requires 3 x AA batteries.
P 8134 29.95
P 8267 Mains Power Consumption Meter/Monitor
P 8264 By simply plugging this compact Price Each RRP
meter into a standard power
All feature 10A overload breaker and 0.9m lead. point (GPO), you are able to P 8137 23.95
calculate the running costs P 8138 Ch. 2 GPO Transmitter 11.50
(in $ or kW/H) of any connected P 8139 Ch. 3 GPO Transmitter 11.50
appliance. Can also display
Price Each RRP 4+ 10+ voltage and current draw. Mains Timer Switches
Internal batteries maintain data
P 8267 4 Way Switched 19.95 17.50 16.50 during mains failure.
P 8261 4 Way 6.35 6.05 5.65
P 8264 6 Way 8.25 7.50 6.90
Price Each RRP 3+ 6+
P 8133 14.50 13.05 11.60
PowerShield® ZapGuard Remote Control Mains Switch
X 8010 X 8018
5 year X 8010: Standard 24 hour mains timer. Allows easy
warranty selection of ON and OFF times at any 15 minute inter-
val in a 24 hour period. Power down office appliances
A professional surge protector for your home theatre, Allows remote control of just about any appliance! when you don't need them, eg the coffee machine or Power
computer & security equipment. Includes surge and This 8 channel RF mains switch package is suitable photocopier after 5pm.
spike protection for 8 mains power outlets up to for loads up to 1000W. Up to 8 mains switches can 10
110,000 amps! Plus protection for your TV aerial and be controlled. RF signal means line-of-sight to the out- X 8018: This 7 day digital timer can switch on and
satellite dish (via PAL and F type connection). 4090 let is not required. Remote includes 1 x 23A 12V alka- off up to 10 times per day. Has a “random” function
joules of energy absorption outperforms most line battery. Operating range 20m. Frequency which turns appliances on and off at non-specified
standard surge protection boards. Offers a $95,000 433.92MHz. Please check power consumption of your ap- times between the hours of 6pm and 6am (great for
warranty, redeemable if connected equipment is pliances before making your purchase. when you are on holiday). Also features a countdown
damaged as a result of a surge or spike. timer which may be used to turn appliances on or off.
Price Each RRP 4+ Price Each RRP 4+ 10+ Price Each RRP 4+ 10+
P 8155 69.00 65.00 19.95 18.75 17.95 9.50 9.20 8.80
A 0340 Switch & remote 15.50 14.80 13.80 X 8010 24 Hour Timer 22.95 20.00 18.50
A 0342 Extra mains switch X 8018 7 Day Digital Timer
10 Way Surge Power Board Powertran® 4 Port USB Travel Adaptor
Remote Control Power Board
new
Offers surge and spike protection for your mains A four outlet surge protected power board with RF re- A four outlet USB adaptor with high current output
powered appliances, TV aerial & telephone lines. Up mote control & on/off switching for individual outlets. (2.1A) for faster charging than standard USB adap-
to 2400W of equipment can be connected to this Great for reducing power consumption around the tors. Max 2.1A current shared between all USB out-
power board with protection up to 52,000 amps! home or office. Switch devices on and off at the touch puts. Suitable for powering or charging portable
1550 joules of energy absorption. Dual USB sockets of a button, up to 50m away (less if used through devices including smartphones, tablets & MP3 play-
provide handy charging outputs for your smartphone walls or floors). Frequency 433.92MHz. Maximum ers. USB A type output connector. Includes ‘clip on’
or tablet (2A max). PAL or F type aerial connection, total load 2400W (10A). Remote includes 1 x 23A 12V adaptors to suit Australian, US, UK and European
RJ12/45 connection for your phone line. 1.8m lead. alkaline battery. Please check power consumption of your mains sockets. 100-240V ac input.
appliances before making your purchase.
Price Each RRP 4+ 10+ Price Each RRP 2+ 4+ Price Each RRP 2+ 4+
P 8268 10 Way 49.95 44.90 39.90 P 8119 49.95 47.50 44.90 A 0309A 2.1A 28.50 25.65 22.80
Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au
238 Power All prices shown are RRP inc. GST.
Travel Adaptors & Laptop Power Supplies
Korjo® Travel Adaptors 6A (100W) Laptop Power Supply High Current Mains USB Double Adaptor
A 0305 A 0306 A 0307 A dual outlet USB
adaptor with dual
Allows Australian appliances to be plugged into inter- Designed specifically for powering laptops. 240V ac 240V GPOs with high new
national sockets (does not convert voltage). input voltage. Dual auxiliary USB outputs (5V 1.5A current output (3.5A)
See www.korjo.com.au for list of countries. max). Supplied with 8 dc adaptors to suit HP/Com- for faster charging RRP 2+ 4+
paq, Dell, Toshiba, IBM, Asus, Fujitsu, Sharp, NEC and than standard USB 29.50 26.95 23.50
Price Each RRP Acer. Size: 130 x 56 x 31mm. Energy authority ap- adaptors. Max 3.5A
proved. 100W continuous, 120W short term use. current shared
A 0305 North America to Aus Socket 9.95 between both USB
A 0306 European to Aus Socket 9.95 outputs.
A 0307 UK to Aus Socket 9.95
Price Each
M 8894 3.5A
Korjo® International Appliance Adaptors 15V 16V 18V 19V 20V 24V High Current Mains USB Double Adaptor
M 8996 6A 6A 5A 5A 5A 4.2A
A 0308 A dual outlet USB adaptor
with 240V GPO with high
Price Each RRP 2+ 4+ current output (3.5A) for
M 8996 79.95 72.00 64.00 faster charging than standard
USB adaptors. Max 3.5A
A 0300 new 6A Car Laptop Power Supply current shared between both
USB outputs. Suitable for
Allows international appliances to be plugged into Aus- charging two smartphones or
tralian mains sockets. Does not convert voltage. tablets at once.
A 0300: Suits appliances for all over the world (ex-
cept India & South Africa). Price Each RRP 2+ 4+
A 0308: Suits 2 & 3 pin European, US and Japanese M 8893 3A 24.50 22.50 19.75
plugs for use in Australia & New Zealand.
Price Each RRP HPM® 4.2A USB Charger
A 0300 12.50
A 0308 Compact version 10.50
5.4A (75W) Laptop Power Supply A compact switchmode power adaptor designed
specifically for powering laptop computers from a car
accessory socket (cigarette lighter socket). 12V-14V dc new
input. Selectable output voltages 15, 16, 18.5, 19,
Power 19.5, 20 and 24V dc, fully regulated at up to 120W. High current USB charging with two 2.1A outlets en-
Supplied with 8 dc adaptors to suit: Compaq, Dell, abling two tablets to be charged simultaneously. Per-
Toshiba, IBM, Gateway, Sharp, Acer, Asus, NEC, fect for the bedside table or desk. Includes 1.5m
Philips, Samsung, HP, Sony, Fujitsu, Panasonic. mains lead. 4.2A total output.
Designed specifically for powering laptops. 240V ac Price Each RRP 2+ 4+ Price Each RRP
M 8627A 55.00 49.00 44.30 M 8885 4.2A 29.95
10 input voltage. Fitted with auxiliary USB output (5V Universal 3 Coil Wireless Qi Charging Pad
1.5A max). Includes 6 dc adaptors to suit HP/Com-
paq, Dell, Toshiba, IBM, Asus, Fujitsu, Sharp, NEC and 6A (90W) Car/240V Laptop Power Supply
Acer. Size: 130 x 56 x 31mm. Energy authority ap-
proved. 75W continuous, 90W short term use.
12V 15V 16V 18V 19V 20V
M 8992 5.4A 4.7A 4.4A 3.9A 3.7A 3.5A
Price Each RRP 2+ 4+ new
M 8992 57.95 53.00 48.00
8.5A (144W) Laptop Power Supply Utilises 3 charging coils for superior charging
performance (some models on the market only use
LCD readout indicates one coil, which reduces the reliability of connection).
voltage selected. Transfers 5V, 1.5A charge current without the need to
plug in your phone - simply place it on the charging
pad. Operates with smartphones fitted with QI
charging cases or newer phones with wireless
charging on board (See www.qinside.biz for full list.)
A laptop power supply designed for both 240V mains Price Each RRP 2+ 4+
and portable 12V use. Includes car power adaptor, D 2325 69.95 63.00 56.00
mains lead and 12 tips to suit popular models of lap-
Designed for powering laptops. 240V ac input voltage. top. These include HP/Compaq, Sony, Dell, Toshiba, Can’t get to a store?
Auxiliary USB output 5V 500mA max. Supplied with 9 IBM, Lenovo, Samsung, Fujitsu and Acer. Voltage out-
dc adaptors to suit HP/Compaq, Dell, Toshiba, IBM, put is set automatically when different tips are plugged We provide same day delivery for metro
Asus, Fujitsu, Sharp, NEC and Acer. Dimensions: 180 in. Size: 130 x 56 x 31mm. Energy authority ap- Sydney, Melbourne & Perth. PLUS
x 63 x 40mm. Energy authority approved. proved. Voltages available: 14.5, 15, 16, 16.5, 18.5, overnight delivery Australia wide! Ask
19, 19.5, 20, 24V output at maximum of 90W. about our affordable freight rates.
12-16V 18V 18.5-19V 19.5-20V 22V 24V
M 8998 8.5A 7.7A 7.25A 7A 6.5A 6A
Price Each RRP 2+ 4+ Price Each RRP 2+ 4+
M 8998 109.00 99.00 89.00 M 8990 99.95 89.95 79.95
www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999
All prices shown are RRP inc. GST. Power 239
Car 4.8A 5V DC Dual USB Adaptor USB & Power Accessories
Screw Terminal Line DC Plugs In-line 2 Pin Bullet Connector
new
new Price Each RRP 10+ 50+ Supplied pre-terminated in a 30cm loop with mating
connectors on each end. 18AWG cable ( 7.5A rated).
P 0608 2.1mm Plug 5.95 5.50 4.95
Huge 4.8A current output is ideal for charging two P 0610 2.1mm Socket 5.95 5.50 4.95 Price Each RRP 10+ 40+
tablets simultaneously. 12-24V input. Inbuilt LED M 8610 3.45 3.05 2.75
power indicator.
DC Power Splitter Leads
Price Each RRP 3+ 6+ Merit DC to Car Accessory Plug Lead
M 8625 19.95 17.70 15.70
Car 3.1A 5V DC Triple USB Adaptor
P 6716 new
new LED readout Split a single power supply between multiple devices. A 10A fused adaptor from car accessory plug to Merit
displays battery Ideally used with a high current plugpack to distribute DC socket. Suits portable appliances fitted with Merit
voltage & charge power to multiple cameras. 2.1mm dc connectors. connectors.
current. RRP 2+ 4+
12.50 11.95 11.25
Allows you to charge up USB devices in your car. Price Each RRP 4+ 10+ Price Each
Great for iPads & smartphones. Max current 3.1A. M 8615 300mm
12-24V input. Inbuilt LED car battery level readout. P 6715 2 Way 7.50 6.75 6.00
P 6716 4 Way 8.95 7.65 7.20 Inline 2.1mm DC Switch Lead
P 6718 5 Way 9.95 9.00 8.00
Price Each RRP 3+ 6+ P 6721 8 Way new 14.95 13.50 12.00 A quick and easy
M 8624 19.95 17.70 15.70 way to switch
plugpack pow-
Car 2.1A 5V DC Dual USB Adaptor DC Power Lead ered devices on
and off. 2.1mm
DC jacks. new
2.1mm dc plug to 2.1mm dc plug. 50cm. Price Each RRP 4+ 8+
P 8225 5.95 5.35 4.75
Allows you to power up two USB devices in your car. Price Each RRP 4+ 10+ Car Accessory to Croc Clips DC Lead
Great for iPods, iPads, MP3 players etc. Max current P 6717 6.50 5.65 4.85
output 2.1A. 12-24V Input Ideal for
Polarity Sensing LED DC Plug connecting
Price Each RRP 2+ 4+ a portable
M 8623A 9.95 9.25 8.70 device to a
car battery.
Dual Car Power Adaptor With USB A 2.1mm dc plug featuring LEDs which sense polarity Price Each RRP 2+ 4+ Power
of the power connection. Blue for tip positive, red for M 8095 8.00 7.20 6.40
This dual car accessory tip negative, purple for ac voltage. Ideal for connecting
socket with USB outlets is power to cameras at the end of cable runs. 5-30V Alligator Clip Lead 10
designed to fit into your ac/dc range. 1m length.
cars cup holder. Provides
power outlets for additional Price Each RRP 4+ 10+ Reversible design fits into plugpack tip socket.
devices such as GPS, plus P 0606 4.95 4.15 4.00
two USB charging outlets
for your phone, iPod or Dual Cigarette Lighter Adaptor Price Each RRP 10+ 25+
portable gaming device. M 9480 2.95 2.65 2.25
5V 0.7A USB output.
Price Each RRP 2+ 4+ ROHS
M 8622 17.95 16.50 15.00
2A Car Accessory DC Lead
Car Power Adaptor With USB Includes
2.1mm dc
plug
Price Each RRP 4+ 10+ Interchangeable tips. Powers 12V devices in your car.
P 0650 2 x socket to plug 11.95 11.25 10.50
new Price Each RRP 10+ 40+
M 8617 2m Lead 3.95 3.50 2.95
Plugs into your car cigarette lighter socket for New Items 3A Car Accessory DC Lead
powering portable appliances. Just the shot for
portable radios, digital cameras, TVs, CD players, Please note that many items marked Fixed 2.1mm tip. Powers 12V devices in your car.
iPods, electronic games etc. Includes seven reversible as “new” may not be available when Curly cord keeps your cabling tidy. Max length 2.5m
tips to suit most common appliances plus USB Type the catalogue is released. For these
A. Regulated voltage settings 3, 4.5, 5, 6, 7.5, 8.4, 9V items, we suggest you contact us for
and 12V dc. 1.8A regulated. stock availability before ordering
Price Each RRP 2+ 4+ Price Each RRP 10+ 40+
M 8620B 26.95 24.90 22.90 M 8618 Curly cord lead 5.95 5.50 5.00
Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au
240 Power All prices shown are RRP inc. GST.
Batteries Mallory® 6V Torch Battery
NiMH Rechargeables Panasonic® Alkaline High quality 6V lantern
battery as used in
popular torches.
Price Per Size Pk Qty RRP 4+ 10+ Price Per Size Pk Qty new new
AAA 2
S 4742D AAA 850mAh 2 6.95 6.00 4.95 S 4951A AA 4 RRP 10+ 40+
S 4746F AA 2500mAh 4 21.80 20.60 19.00 S 4956A 2.00 1.90 1.80
S 4748C C 5000mAh 1 14.95 14.40 13.70 3.00 2.80 2.70
S 4753B D 8000mAh 1 27.95 25.00 22.00
S 4740C 9V 250mAh 1 12.95 11.65 10.40 Panasonic® Alkaline Bulk Packs Price Each RRP 4+ 10+
S 4800A 4.95 4.65 4.25
Panasonic® Lithium Camera batteries
Low Discharge NiMH Batteries
new Price Per Pk RRP 4+ S 4990A S 4992A
S 4941A AAA Pk 20 11.95 11.25
Low discharge Ni-MH batteries ready for use straight S 4943A AA Pk 20 11.95 11.25 Price Each RRP 4+ 10+
out of the pack and rechargeable in a normal AA or S 4990A 3V CR2 8.95 8.50
AAA charger (not suitable for fast chargers). Recharge Duracell® Ultra Alkaline S 4992A 3V CR123A 7.95 7.65 8.10
up to 1000 times. Hold up to 85% capacity even when 7.25
unused for 12 months.
Price Per Pk RRP 4+ 10+ 6 & 12V GP® Alkaline Batteries
11.95 10.85 9.95
S 4704A AAA Pk 4 900mAh 19.95 17.75 15.50
S 4708A AA Pk 4 2300mAh
NiMH Sub C With Tags
Bulk versions are Duracell® ‘Procell’ type S 5020 S 5021 S 5022 S 5023
- not available to retail or mailorder customers.
As used in many car alarm key ring remote controls,
Price Per Size Pk Qty RRP 10+ 40+ remote garage door openers etc.
Ideal for replacing battery packs in power tools. S 4911 AAA 2 5.75 5.60 5.45
4.65
Price Each RRP 4+ 10+ S 4916 AA 2 4.90 4.75 6.60 Price Each RRP 10+ 40+
S 4750A Sub C 3300mAH Pk 1 9.95 8.95 7.95 6.80
S 4921 C 2 6.95 6.75 6.95 S 5020 GP23AE 12V 2.65 2.35 2.10
S 5021 GP27A 12V 2.65 2.35 2.10
S 4926 D 2 7.15 6.95 S 5022 GP11A 6V 2.85 2.60 2.35
S 5023 GP476A 6V 4.95 4.45 3.95
S 4931 9V 1 7.25 7.05
Power Sony® Heavy Duty (Mercury Free) Bulk Models - No Packaging (Wholesale only)
new
S 4810 AAA 1 Boxes of 24pcs
S 4815 AA 1 Boxes of 24pcs Button Batteries
S 4820 C 1 Boxes of 12pcs
S 4825 D 1 Boxes of 12pcs
10 S 4830 9V 1 Boxes of 12pcs
Bulk models not available to retail/mailorder customers Powerhouse® Long Life Lithium
and are Powercell® brand.
Silver Oxide 1.55V
Price Per Size Pk Qty RRP 10+ 40+ Price Each SR44 GP357 RRP 10+ 25+
SR60 GP364 3.95 3.60 3.25
S 4949A AAA 4 2.00 1.85 1.70 S 5000 SR69 GP371 3.15 2.80 2.50
1.70 S 5001 SR44 GPS76E 2.90 2.60 2.30
S 4955A AA 4 2.00 1.85 1.70 S 5004 SR41 GP392 2.90 2.60 2.30
2.25 S 5006 SR48 GP393 2.05 1.85 1.65
S 4960A C 2 2.00 1.85 2.00 Ready to use long life lithium batteries with 10 year S 5010 SR54 GP389 3.95 3.60 3.25
shelf life. Ideal for high power devices such as digital S 5011 SR66 GP377 2.90 2.60 2.30
S 4965A D 2 2.65 2.45 cameras, MP3 players, game consoles etc. Not S 5018 2.05 1.85 1.65
rechargeable. S 5019
S 4970A 9V 1 2.50 2.25 RRP 10+ 25+
2.05 1.85 1.65
Bulk Powercell® Models - No Packaging (Wholesale only) 2.05 1.85 1.65
2.05 1.85 1.65
S 4850 AAA 1 Boxes of 40pcs
RRP 10+ 25+
S 4855 AA 1 Boxes of 40pcs Price Per Pk RRP 4+ 10+ Alkaline 1.5V 3.95 3.65 3.30
7.95 7.20 6.40 4.95 4.45 3.95
S 4860 C 1 Boxes of 24pcs S 4904 AAA Pk 2 8.95 8.10 7.20 3.95 3.65 3.30
S 4906 AA Pk 2 3.95 3.65 3.30
S 4865 D 1 Boxes of 24pcs Price Each 3.95 3.65 3.30
3.95 3.65 3.30
S 4870 9V 1 Boxes of 10pcs S 5014 LR44 GPA76 2.95 2.75 2.50
S 5015 LR54 GP189 2.95 2.75 2.50
AA Battery Adaptors Ultralife® Lithium 9V Battery S 5016 LR43 GP186 2.95 2.75 2.50
Converts a AA size battery Lithium 3V
to fit into a C or D size bat-
tery powered appliance. Price Each new CR1632
Pack of 4. CR2450
S 4988 CR1616
Price Per Pk RRP 4+ 10+ Lasts up to 5 times longer than a normal alkaline! S 4989 CR1620
Due to the extra capacity these batteries are 1mm wider than S 4993A CR2430
S 4607 AA to C Cell (4 Pack) 3.95 3.50 3.00 a regular 9V 216 cell and may not fit into some devices. S 4994A CR1220
S 4609 AA to D Cell (4 Pack) 5.70 5.20 4.60 S 4995 CR2016
Price Each RRP 6+ 12+ S 4996A CR2025
S 4908 9V 1200mAh 16.95 16.50 16.00 S 4997A CR2032
S 4998A
S 4999A
www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999
All prices shown are RRP inc. GST. Power 241
SLA Batteries & Holders
2V 200Ah SLA Battery Battery Snaps & Clips PCB Mount Battery Holders ROHS
Commonly used in solar & 57
communication battery
backup banks. Fully sealed 12.5 32
design. Multiple cells can be
linked to form one large bat- P 0455 ROHS S 5050 15.5 S 5027
tery. Link terminals provided
with each cell. Price Each RRP 10+ 40+
SA5059: 300mm battery P 0455 Snap 0.40 0.35 0.30
link with 10mm lugs. S 5050 9V Clip 0.45 0.40 0.35
Battery Holders With On/Off Switch 56 14
51.25 16
Dimensions: 171Lx106Wx330Hmm. With on/off switch & 55 S 5029
Weight: 14kg. Terminal connection: screw for battery cover. 12.5 31 S 5048
B3, suit M10 bolt. 150mm fly lead con-
nection. 14 20
Price Each RRP 2+ 4+ ROHS
209.00 189.00 Price Each
S 5059 2V 200Ah 229.00 S 5042 2 x AA RRP 10+ 40+
SA5059 300mm Link 14.95 S 5041 3 x AA 1.90 1.70 1.55
S 5043 4 x AA 2.15 2.05 1.85
Henda® Sealed Lead Acid Batteries S 5055 2 x AAA 2.30 2.10 1.90
1.90 1.70 1.60
Flush Mount 9V Battery Holder 50 12
13
42.8
34.5 S 5054
24 28 88
20
12 3.2Ø 5 3.5 6
5 6.25 14
Fits into similar dimen- 3.5
sions as an IEC power
socket. Slide in battery ROHS 23
drawer locks into place.
Mounting depth 55mm. RRP 10+ 40+ S 5056
3.50 3.20 3.05
Price Ø 1.5
S 5049 11 Pin Ø 0.7
Battery Holders 22.50 6.40 1.50 5.00
3.40
Premium commercial grade, long life and 5.40 10.00 3xØ1.30
maintenance free sealed lead acid batteries. Cells are 18.10 13.10 HOLES
fully sealed to prevent leakage of electrolyte. 6.40
Applications include security systems, medical 13.10 0.40 S 5058
equipment, computers, and UPS. Excessive Power10.00
temperatures over 60°C can affect the ABS battery 10+ 40+
casing. SLA batteries should be used in well ventilated Price Each RRP 0.75 0.65
conditions. Not for use in engine bays. 0.60 0.50
S 5124 is a deep cycle battery. S 5027 2 x AA Flat 0.85 0.70 0.65
S 5029 Single AA 0.70 0.60 0.50
6V Models Single S 5048 9V 0.80 1.85 1.65
S 5054 Single AAA 0.70 2.30 2.10
S 5056 20mm Button cell 2.05
S 5058 20mm Button cell vertical 2.50
Dimensions (mm) Dual Square
Part No. H L W Connections Weight ROHS
S 5062 57 97 25 4.8mm spade 0.30kg Battery Terminal Covers
S 5063 66 134 34 4.8mm spade 0.68kg 10
S 5064 101 70 48 4.8mm spade 0.76kg
S 5073 100 151 51 4.8mm spade 1.94kg
12V Models Long Flat
Part No. H L W Connections Weight AAA Size * Supplied with fly leads
S 5075B 57 97 43 4.8mm spade 0.58kg Made from flexible PVC these covers protect and insu-
late battery terminals on SLA and automotive batter-
S 5078 106 56 78 4.8mm spade 1.24kg Price Each RRP 10+ 40+ ies. Prevents buildup of dirt on terminals and helps to
reduce the possibility of accidental short circuits.
S 5080 66 134 67 4.8mm spade 1.30kg S 5051* AAA Single 0.70 0.60 0.55
S 5052* AAA Dual 0.85 0.75 0.65
S 5084 109 90 70 4.8mm spade 1.7kg S 5053* 4 x AAA Flat 1.65 1.50 1.35
S 5090B 101 151 65 4.8mm spade 2.55kg
S 5098 101 151 99 4.8mm spade 3.94kg Price Each Cable Entry RRP 4+ 10+
S 5100 167 181 77 M5 bolt & nut 6.4kg AA Size S 5138 13mm Red 8 2.50 2.25 2.00
S 5104A 182 166 127 M5 bolt & nut 8.15kg Price Each RRP 10+ 40+ S 5139 13mm Black 8 2.50 2.25 2.00
S 5113 170 197 166 M5 bolt & nut 13kg S 5026 AA Single 0.70 0.60 0.50
S 5025A AA Dual 0.85 0.75 0.65
S 5124 234 169 306 M6 bolt & nut 28kg S 5057* AA Dual 0.85 0.75 0.65 S 5140 20mm Red 12 2.95 2.70 2.40
S 5033 3 x AA Flat 1.00 0.90 0.80
All dimensions ±2mm and include connection points S 5028 4 x AA Long 1.20 1.10 1.00 S 5141 20mm Black 12 2.95 2.70 2.40
S 5030 4 x AA Flat 1.20 1.10 1.00
Price Each RRP 4+ 10+ S 5031 4 x AA Square 1.20 1.10 1.00 S 5142 42mm Red 15 3.95 3.60 3.20
S 5032 6 x AA Square 1.40 1.25 1.15
S 5062 6V 1.3Ah 12.95 11.90 10.90 S 5034 8 x AA Square 1.70 1.55 1.40 S 5143 42mm Black 15 3.95 3.60 3.20
S 5063 6V 3.3Ah 14.50 13.00 11.60 S 5035 10 x AA Square 2.30 2.10 1.90
S 5064 6V 4.5Ah new 19.95 18.00 16.00 Education
S 5073 6V 12Ah 29.95 26.90 23.70 C Size 4 x C Long RRP 10+ 40+ & Government Accounts
S 5075B 12V 1.3Ah 19.95 17.50 15.50 1.90 1.70 1.55
S 5078 12V 2.9Ah 27.95 25.15 22.35 Price Each Universities, Colleges, Secondary
S 5080 12V 3.3Ah 29.80 28.20 26.45 S 5036 Schools, TAFE Colleges & Government
S 5084 12V 4.5Ah 27.95 24.90 22.00 Departments qualify for 30 day credit
S 5090B 12V 7.2Ah 29.95 26.75 23.50 D Size D Single RRP 10+ 40+ accounts. For more information call
S 5098 12V 12Ah 56.50 50.85 45.20 4 x D Long 1300 797 007.
S 5100 12V 20Ah 95.00 85.50 76.00 Price Each 1.00 0.90 0.80
S 5104A 12V 26Ah 119.00 109.00 99.00 S 5046 2.00 1.80 1.60
S 5113 12V 40Ah 179.00 165.00 150.00 S 5038
S 5124 12V 90Ah* 335.00 298.00 265.00
* Deep cycle
Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au
242 Power All prices shown are RRP inc. GST.
Battery Chargers 6/12V 4.5A Automotive Battery Charger
new
NiMH AAA/AA/9V Battery Charger NiMH AAA/AA Battery Charger
Accepts up to 10 x AA or AAA and 2 x 9V batteries for Recharges high capacity NiMH batteries in under 2 Suitable for all lead acid type batteries, this compact
overnight charging. Includes discharge function for hours! This compact microprocessor controlled charger will charge 6V and 12V cells using a 7 stage
optimum battery performance. Only suitable for charger features an LCD indicating battery charge charging circuit. It incorporates summer & winter
charging same size and make of battery at one time. status. Includes mains power supply and 12V dc car charging modes for use in cold climates. The circuitry
Great for home or in-car use. May be used with low power lead. Note: not suitable for use with low automatically diagnoses the battery state and delivers
discharge NiMH “Combo” batteries. discharge NiMH “Combo” batteries. the appropriate charge current to maintain optimum
performance. The charger may be permanently con-
Features • Suitable for AA, AAA or 9V batteries Features • Charges 2 or 4 x AA or AAA batteries at once nected without overcharging or damaging the battery.
• Discharge function • Includes power supply and car ac- • LCD bargraph readout • Thermal cutout Ideal for seldom used vehicles such as boats, vintage
cessory plug adaptor • LED charge indicators • Timer/capacity cutout to prevent overcharging • Short cars, motorbikes etc. Size: 203 x 48 x 67mm.
circuit & polarity protected • Bad cell detection
Price Each RRP 2+ 4+
A 0276 49.95 44.90 39.90
Mains Alkaline AAA/AA Battery Charger Price Each RRP 2+ 4+ Features • Short circuit and reverse polarity protected
A 0283 29.95 26.90 23.70 • Overheating protection • Includes car accessory plug
New Low lead, croc clip lead and ring terminal lead • Suits 6V and
Price! Portable AAA/AA NiMH Battery Charger 12V cells • Winter & summer charge modes • Defective
cell detection • Trickle charge function • IP65 rated
Price Each RRP 2+ 4+
M 8534 95.00 85.00 75.00
Batteries 12V 10A Automotive Battery Charger
not included. new
Power Connects directly mains power, no plugpack Super fast NiCad and NiMH battery charger, powered
required. This latest generation, microprocessor directly from your car accessory socket! Suitable for
controlled battery charger allows you to recharge up to four AAA or AA cells. Great for keeping batteries
standard alkaline batteries up to 20 times. In turn, it charged when you are away from a mains socket. In-
helps to reduce the money you spend on batteries cludes 12V dc car power lead.
and the environmental impact from disposed batteries
in landfills. It’s also suitable for NiMH cells, making it Price Each RRP
a true “do-it-all” charging solution for AA or AAA size A 0284 30 Minute Charger 24.95
batteries. 240V operation.
Sealed Lead Acid Battery Chargers Suitable for all lead acid type batteries, this compact
Features • Recharge standard alkaline cells up to 20 charger will charge 12V cells using a 10 stage charg-
M 8520 ing circuit. It incorporates summer & winter charging
10 times • Also suits NiMH cells • Charges 2 or 4 x AA or modes for use in cold climates. Plus, a smart battery
AAA batteries at once • Automatic cut-off after 4 hours or maintenance mode can recover deeply discharged
charge completion • Over temperature protected • LED cells. The circuitry automatically diagnoses the battery
indicators • Includes mains lead state and delivers the appropriate charge current to
maintain optimum performance. The charger may be
Price Each RRP permanently connected without overcharging or dam-
A 0280 19.95 aging the battery. Ideal for seldom used vehicles such
as boats, vintage cars, motorbikes etc.
NiCad & NiMH Mains Battery Charger Size: 245 x 62 x 102mm.
M 8528 Features • Short circuit and reverse polarity protected
• Overheating protection • Suits 12V lead acid & calcium
Batteries Quality “plugpack style” SLA battery chargers with cells • Includes car accessory plug lead, croc clip lead
not included. auto switching between boost and trickle modes. and ring terminal lead • Winter & summer charge modes
Featuring an LED indicator showing charging status • Defective cell detection • Boost charge function
and quick connection to the battery. Ideal for use in • Trickle charge function • IP65 rated
security systems, fire alarms & monitoring systems.
Price Each RRP 2+ 4+
M 8536 189.00 175.00 155.00
Home battery charger designed for AAA, AA, C, D and Charge Charge Suitable Got an electronics
9V NiMH/NiCD cells. Charges 4 batteries at a time Voltage Current Batteries question?
(or 2 x 9V batteries at a time) Automatic trickle charge 300mA 1.2Ah - 7.2Ah
mode ensures cells are not overcharged. 12V Try the reference section at the back of
2.7A 9Ah - 60Ah
Features • Suitable for AAA, AA, C, D or 9V batteries M 8520 6 or 12V this catalogue. Packed with plenty of
• Trickle charge mode • LED indicators • Typical charge M 8528
time for 4 x AA NiMH cells - 8 hours handy formulae, tips and answers.
Price Each RRP 2+ 4+
Price Each RRP 2+ 4+
A 0288A 28.95 26.95 24.70 M 8520 12V @ 300mA 19.95 18.00 16.50
M 8528 6 or 12V @ 2.7A 74.95 67.50 60.00
www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999
All prices shown are RRP inc. GST. Power 243
Multi-Voltage Power Supply / Chargers Battery Backup & Switchmode Supplies
M 8572 Powertran® Switchmode Power Supplies
M 8585
M 8587 ROHS
These modules are a complete regulated power supply and a battery charger in one Switchmode power supplies offer several significant advantages over traditional linear
compact package. With the appropriate transformer they can be configured to deliver transformer power supplies. They are far more efficient than their linear counterparts.
either 6V, 12V or 24V dc. Voltage selection is via an on board DIP switch. All models As they do not use power or mains transformers the equivalent power supply weighs
incorporate short circuit protection and LED power status indicator. Designed for considerably less than traditional types. Physical size is also reduced. Though the
systems requiring battery backup in the event of mains failure. Under normal mains power supplies are supplied in a vented steel cabinet they must be installed within a
conditions the module would power the connected load and charge the battery. With secondary earthed cabinet as the 240V input terminals are exposed.
mains failure, the load is powered by the battery. Ideal for security applications,
access control, fire alarm systems etc. Features • Screw terminals for inputs and outputs • Wide operating input voltage 90 – 264V
ac, 47 – 63Hz • Excellent output regulation from no load to full load • High efficiency 65-80%
Features • Compact design Suggested Powertran transformers: 24V at full load • Overload and short circuit protection • Line regulation ±0.5% • Low ripple and
• Up to 10A output • Short circuit 6V 12V M 6674L noise ±1% max • Inbuilt EMI filter to reduce noise radiation • EMC approved • M 8737 &
protection • Current limiting M 5312 M 8776 include phase correction circuit • Note: minimum load requirements may apply.
• Fused output • 6V, 12V or 24V M 8572 M 2156L M 2170L M 5725
output • LED indicator M 8585 M 2170L M 2170L
M 8587 M 2170L M 5371
Price Each RRP 2+ 4+ M 8730 Power Output In Rush Current Dimensions
M 8572 2A M 8769 25W 2.08A @ 12V dc 25A typical cold start 99W x 97D x 35H
M 8585 5A 45.95 41.40 37.40 M 8732 25W 1.04A @ 24V dc 25A typical cold start 99W x 97D x 35H
M 8587 10A 95.00 85.00 77.00 M 8771 40W 3.33A @ 12V dc 30A typical cold start 129W x 98D x 38H
149.00 142.00 135.00 M 8734 40W 1.66A @ 24V dc 30A typical cold start 129W x 98D x 38H
M 8773 60W 30A typical cold start 159W x 97D x 38H
12V DC UPS Battery Backup Power Supply M 8735 60W 5A @ 12V dc 30A typical cold start 159W x 97D x 38H
M 8774 100W 2.5A @ 24V dc 38A typical cold start 199W x 98D x 38H
M 8737 100W 8.33A @ 12V dc 38A typical cold start 199W x 98D x 38H
M 8776 150W 4.17A @ 24V dc 38A typical cold start 199W x 99D x 50H
150W 12.5A @ 12V dc 38A typical cold start 199W x 99D x 50H
12.5A @ 24V dc
Price Each RRP 2+ 4+ Power
M 8730 25W 12V dc 44.95 40.50 36.00
M 8769 25W 24V dc 44.95 40.50 36.00
M 8732 40W 12V dc 54.95 49.50 44.00
M 8771 40W 24V dc 54.95 49.50 44.00
M 8734 60W 12V dc 59.95 54.00 48.00
M 8773 60W 24V dc 59.95 54.00 48.00
M 8735 100W 12V dc 69.95 63.00 56.00
M 8774 100W 24V dc 69.95 63.00 56.00
M 8737 150W 12V dc 115.00 105.00 95.00
M 8776 150W 24V dc 115.00 105.00 95.00
A complete 12V dc power supply and battery backup in one compact enclosure. Manson® DIN Rail Mount Power Supplies
When operating from 240V, it charges the internal battery (available separately) and
powers the connected load (max 5A). When mains fails, the load is powered from the 10
battery. Features output short circuit protection, current limiting and over voltage
protection. Standby battery low voltage cutoff (10.8V). Ideal for alarm backup use.
Indoor use only. Includes power lead.
Price Each RRP 3+ 6+
M 8561
S 5090B 7.2Ah battery to suit 129.00 119.00 109.00
29.95
8 Way 24V DC Power Distribution Box
These highly efficient, MODEL 60W 120W
super compact DIN rail Input range: 90-264V ac 90-264V ac
power supplies are ideal Frequency:
for industrial applications. In rush current: 47-63Hz 47-63Hz
Spring loaded bracket Efficiency: 40A @ 240V ac 55A @ 240V ac
suitable for mounting to Line regulation:
asymmetrical “G” or Output voltage: 85% 85%
35mm top hat type DIN 0.2% 0.2%
rails. See page 262 for Output current: 10.5-14V (12V) 10.5-14V (12V)
DIN rail & accessories to 22.5-28V (24V) 22.5-28V (24V)
suit. Ripple/noise: 44.5-53V (48V) 44.5-53V (48V)
Dimensions: 5A (12V) 10A (12V)
Provides 24V DC power to each of 8 outputs. Maximum current across all outputs is 2.5A (24V) 5A (24V)
5A (600mA per output). Each output is fitted with screw terminals and a resettable 1.25A (48V) 2.5A (48V)
fuse. The design includes output current limiting, over voltage protection, reverse 50mv 50mv
polarity and short circuit protection. Cable conduit cutouts are provided, plus a key 45W x 115D x 100H 61W x 126D x 125H
lock for tamper prevention. Indoor use only. Includes power lead.
Price Each RRP 2+ 4+
Price Each RRP 2+ 5+
M 9760 M 8405 60W 12V dc 89.95 85.45 80.95
149.00 135.00 120.00 M 8409 60W 24V dc 89.95 85.45 80.95
M 8413 60W 48V dc 89.95 85.45 80.95
M 8406 120W 12V dc 129.00 123.00 117.00
M 8410 120W 24V dc 129.00 123.00 117.00
M 8414 120W 48V dc 129.00 123.00 117.00
Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au
244 Power All prices shown are RRP inc. GST.
Power Distribution & Battery Protectors
Automotive/SLA Battery Desulfators 9 Way 12V DC CCTV Power Distribution Box
new Extends battery Designed for powering up to a maxi-
life & reduces mum of 9 12V dc powered CCTV cam-
eras. Each output is individually fused
waste! and can be set on or off via internal
jumpers. Each output is protected to
Sulfation is a prime cause of vehicle and SLA batteries prematurely dying. This prevent spikes and surges damaging
occurs for a variety of reasons, such as deep discharging or lack of regular use, and connected cameras. Screw terminals
can dramatically shorten the life you will get from your battery. Fortunately, sulphation are provided for each circuit. Output
can be minimised and partially reversed. These compact desulphation units connect current limiting and over voltage protec-
between the positive and negative terminals of your battery and provide high tion included. Overall total max load is
frequency pulses to break down sulfation on battery plates and provide additional 7.5A (max 1.5A per output). Includes
service life. They are suitable for use with all types of automotive batteries as well as power lead. Indoor use only.
sealed lead acid batteries commonly found in UPS equipment and security systems.
These cheap devices could easily save you hundreds in replacement batteries over Price Each RRP 2+ 5+
their operating life. Adhesive backed for permanent mounting. S 9753B
129.00 115.95 109.95
16 Way Rack Mount CCTV Power Supplies
Important Note: These desulfators transmit a high frequency digital signal to the battery and
do not alter voltage or current within your cars electrical system. They do not damage your
car equipment, connected devices or engine ECU. They are suitable for permanent connec-
tion, however if your vehicle will be idle for more than 3 months, the desulfator should be dis-
connected to prevent battery drain.
Price Each RRP 2+ 4+ A compact 1RU 19” rack mount power supply delivering 500mA current Australian
M 8540 12V under 70Ah to 15 outputs, plus a dedicated full current 8A output. Each output is Made
M 8542 12V over 70Ah 49.95 44.95 39.95
M 8544 24V (all battery capacities) 59.95 53.95 47.95 overload protected via PTC. LEDs provide visual indication of normal or
69.95 62.95 55.95
fault conditions for each zone. Engineered for use in large security
installations requiring power for cameras, pan & tilt units, speed domes
etc. 240V ac input with rear panel mounted circuit breaker.
Low Battery Cut Off Module (12V/24V) Price Each RRP 2+ 4+
Compatible with both 12 and 24V batteries, S 9751B 24V ac 8A max 470.00 445.00 400.00
this cut off module prevents deep discharge of S 9756 12V dc 8A max 470.00 445.00 400.00
SLA backup batteries in security & UPS backup
Power systems. This ensures longer battery service Compuguard™ Home/Office 650VA UPS
life. Simple in-line connection between battery
and control panel. Cut off point is adjustable RRP 2+ 4+ Designed to support small applications 2 year
between 9-10V in a 12V system or 19.2-20.3V such as stand alone or networked PCs warranty
in a 24V system. A master on/off switch is 32.95 31.50 30.00 and point of sale computers. Supplied
also provided for disconnecting the battery. with monitoring and shutdown soft-
Size: 60W x 45D x 22Hmm. RRP 3+ 6+ ware. In the event of a power outage
the UPS will allow continued operation
Price Each 42.00 39.00 37.00 of the PC so that the system can be
M 8550 shutdown safely. It features automatic
voltage regulation, discharge, over-
10 charge and overload protection. Backup
time for one PC @ 100W: 25 min.
Kemo® Low Battery Cut Off Module (12V)
Mains Connections Input Dimensions Weight
This battery saver protects your 12V car battery 3 Aust (2 UPS) 180-270V ac @ 50-60Hz 83W x 200H x 232D 3.6kg
from discharge by disconnecting loads to prevent
voltage dropping below a preset limit (10.4 to Price Each PowerShield Model RRP
13.3V). The module automatically reconnects D 0877A 650VA PSCG650
the loads once the battery recharges, typically 105.00
0.8V above cut-off limit.
Size: 87W x 60D x 33Hmm. SafeGuard™ Home/Office 750VA UPS
Price Each Perfect for a home/office power
A 0712 backup solution. It includes three
battery backup and surge protected
Get a VIP-Trade card. Australian sockets, three dedicated LINE INTERACTIVE
Australian outlets with surge protec-
VIP-Trade customers are entitled to the purple price listed in this tion and RJ45 phone line surge pro- 2 year
catalogue, regardless of quantity purchased. In many cases this tection. Provides modified sinewave warranty
discount can be up to 40% off the RRP. To become a VIP-Trade output and has an audible alarm
customer you must provide use with your ABN and register for when activated. USB PC connection
an account. for software monitoring. Includes
Download an application form at www.altronics.com.au management software to suit most
operating systems.
Mains Connections Input Dimensions Weight
6 Aust (3 UPS) 177-290V ac @ 50-60Hz 292W x 91H x 199D 7kg
Price Each PowerShield Model RRP
D 0873 750VA PSG750
169.00
www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999
All prices shown are RRP inc. GST. Power 245
Powershield® UPS
PowerShield® Uninterruptable Power Supplies (UPS)
UPS systems provide backup power during a mains power blackout allowing devices to be shutdown safely. In addition, the PowerShield
range include protection against surges, sags, brownouts, spikes, radio and electrical interferences. UPS systems are now being widely
employed in computers, telephone systems, medical equipment, home theatre installs and security installations. All backup times listed below will vary with battery capacity
& connected load, consult the PowerShield UPS calculator for more information. Altronics carries two types of PowerShield UPS:
Line Interactive UPS: Regulates the power as it falls and surges. They offer protection against surges, sags, brownouts, spikes, radio and electrical interferences. If the
spike or sag is severe (over 24V above or below nominal 240V output), the UPS will transfer the load to the batteries. The reason why it is called a Line Interactive UPS is
because it only interacts when there are fluctuations in the power line.
True Online Double Conversion UPS: With this UPS, the mains are converted to dc and back to ac to feed the connected equipment with a perfect 240V 50Hz supply. The
double conversion eliminates all noise and interference when delivering perfect power to the equipment while being Voltage and Frequency independent. This means that
unlike the other UPS, the Online UPS will give perfect power even if there is damage to the primary stage because the batteries convert to ac for continuous power.
Defender™ AVR UPS Centurion™ Series True Online Double Conversion UPS
Designed to support multiple computers and 2 year
peripherals, networked PC's and point of sale warranty
systems. Front panel LCD providing real time
battery management, showing battery and TRUE ONLINE DOUBLE CONVERSION
equipment load levels. It includes three battery
backup and surge protected Australian sockets, 2 year
plus three dedicated Australian outlets with warranty
surge protection. Includes PC software.
LINE INTERACTIVE
new
Mains Connections Input Dimensions Weight For critical loads the Centurion offers the best protection against all potential power
6 Aust (3 UPS) 180-300V ac @ 50/60Hz disruptions and anomalies. Ideal for use if you rely on a power generator or live in a
6 Aust (3 UPS) 180-300V ac @ 50/60Hz 146W x 205H x 397D 12kg remote locality. Programmable outlets are provided for load shedding and emergency
power off connection. Includes PC software which communicates to the UPS via USB
Price Each 146W x 205H x 397D 13kg or RS-232. Typical backup time for connected appliances: 8 min full load, 22 min half
D 0882A 1200VA load. All outlets are battery backup and surge protected. *Special order only.
D 0883 1600VA PowerShield Model RRP
PSD1200 Mains Connections Input Dimensions Weight
PSD1600 275.00 D 0892 2 Aust, 2 IEC-C13 175-300V ac @ 47.5-52.5Hz 145W x 220H x 338D 14kg
375.00 D 0893 4 Aust, 2 IEC-C13 175-300V ac @ 47.5-52.5Hz 190W x 335H x 425D 26kg
D 0894 4 Aust, 1 IEC-C13 175-300V ac @ 47.5-52.5Hz 190W x 335H x 425D 28kg
Commander™ Series Pure Sine Wave UPS DA0901 3 Aust, 2 IEC-C13 175-300V ac @ 47.5-52.5Hz 438W x 88H x 480D 18kg
DA0902 3 Aust, 2 IEC-C13 175-300V ac @ 47.5-52.5Hz 438W x 88H x 600D 29.6kg
2 year DA0903 3 Aust, 2 IEC-C13 175-300V ac @ 47.5-52.5Hz 438W x 88H x 600D 29.6kg
warranty
Price Each 1000VA PowerShield Model RRP
LINE INTERACTIVE 2000VA
D 0892 3000VA PSCE1000 880.00
D 0893 1000VA rack mount PSCE2000 1695.00 Power
D 0894* 2000VA rack mount PSCE3000 2395.00
DA0901 3000VA rack mount PSCERT1000 970.00 10
DA0902 PSCERT2000 1799.00
DA0903 PSCERT3000 2600.00
Perfect for servers, motor driven and sensitive devices requiring a perfect sinewave to Powershield Centurion Accessories
operate correctly. LCD provides real time battery management, showing battery and
load level. All outlets are battery backup and surge protected. Includes software which Note: All these accessories are special order items only.
communicates via USB or RS-232. All provide phone line surge protection (RJ45). Stock typically available 3-5 days.
Typical backup: 5 min full load, 14 min half load. D 0912 requires 15A GPO socket.
Price Each Powershield Model RRP
D 0880 Mains Connections Input Dimensions Weight
D 0885 2 Aust, 3 IEC-C13 180-300V ac @ 50-60Hz 180W x 200H x 380D 15kg DB0891 Internal relay card PSCEAS400 220.00
D 0910 2 Aust, 3 IEC-C13 180-300V ac @ 50-60Hz 180W x 200H x 510D 25kg DA0910 Rack mount kit for PSCRT1100-3000 PSRK 125.00
D 0911 3 Aust, 2 IEC-C13 162-290V ac @ 50-60Hz 438W x 88H x 380D 15kg D 0906 Rack mount telescopic rail kit PSRAIL 125.00
D 0912 3 Aust, 2 IEC-C13 162-290V ac @ 50-60Hz 438W x 88H x 380D 23kg DA0891 SNMP card external 595.00
3 Aust, 1 IEC-C19 162-290V ac @ 50-60Hz 438W x 88H x 600D 32kg D 0891 SNMP card internal PSSNMPEE 330.00
DA0908 12 battery bank (rack mount version) PSCESNMP 1210.00
Price Each PowerShield Model RRP D 0907 12 battery bank (tower version) PSRTBB12 1210.00
D 0908 18 battery charging bank (tower version) PSCEBB12 1600.00
D 0880 1000VA tower PSC1000 550.00 D 0903 1000VA Centurion tower + battery bank PSCEBB18CH 1655.00
D 0885 2000VA tower PSC2000 990.00 D 0903A 2000VA Centurion tower + battery bank PSCE1000A 2899.00
D 0910 1100VA 2RU rack mount/freestanding PSCRT1100 840.00 D 0903B 2000VA Centurion tower + 2 battery banks PSCE2000A 4100.00
D 0911 2000VA 2RU rack mount/freestanding PSCRT2000 1195.00 D 0903C 2000VA Centurion tower + 3 battery banks PSCE2000B 5699.00
D 0912 3000VA 2RU rack mount/freestanding PSCRT3000 1720.00 PSCE2000C
Important Note For Wholesale Customers UPS IEC To 3 Pin Mains Connection Lead RRP 10+ 50+
9.95 8.75 7.75
All prices listed in this catalogue are RRP “retail” prices. To Converts an IEC socket outlet, as
found on the rear of many UPS units
access our competitive wholesale pricing scheme apply for an to a standard 3 pin mains GPO
outlet. 15cm length. Energy authority
account via www.altronics.com.au or phone 1300 780 999. approved.
Price Each
P 8420 7.5A 15cm
Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au
246 Power All prices shown are RRP inc. GST.
Laboratory Power Supplies Compact Digital Lab Power Supplies
Lab Power Supply Range. Analog Display Lab Power Supplies
We offer a selection of Manson® & Powertran® new
power supplies which offer excellent value for
money and performance. After evaluating many These compact, fan cooled power supplies are A compact, efficient bench top power supply for use
samples of lab power supplies we have found adjustable between 9 and 15V. A fixed 13.8V setting is in servicing, repair and design of electronics. The low
that these models out performed many other provided for powering automotive devices. Voltage and noise switchmode design offers excellent regulation
models on test. The build quality and external current settings display on the same meter and can for low current requirements. Offers the flexibility of
appearance were also far superior. Look no be toggled via a front panel switch. A toggle switch both wide adjustable voltage and current range. Size:
further than a Manson® or Powertran® power allows quick selection of fixed 13.8V setting. Size: 336W x 87H x 214Dmm. Weight: 2.9kg.
supply for a long service lifetime and second to 155W x 70H x 205Dmm. Weight: 1.5kg.
none performance.
0 To 30V, 0 To 3A/5A
Features • Up to 30A output • 9-15V adjustable Features • Up to 30A output • 0-30V adjustable
• Adjustable current limiting • Overload & short circuit • High efficiency switchmode design • Over temperature,
protected • Less than 80mV ripple & noise • < 2% load voltage and overload protection • Less than 50mV ripple
regulation • Highly efficient switchmode design & noise • 50mV load regulation • High RFI stability
Price Each RRP 2+ 4+ Price Each RRP 2+ 4+
M 8261 9-15V 20A 159.00 149.00 139.00 M 8310 0-30V 20A 379.00 345.00 309.00
M 8263 9-15V 30A 199.00 179.00 159.00 M 8312 0-30V 30A 599.00 540.00 480.00
1 To 30V, 0 To 20A
Dual Tracking ±0 To 30V, 0 To 3A
A compact, efficient bench top power supply for use Adjustable current limiting power supply with 1-30V Comprises two separate, isolated 0-30V, 0-3A power
in servicing, repair and design of electronics. The low 20A range. Voltage and current settings may be set in supplies, plus an auxiliary 1.5-6V, 5A output. Three
noise switchmode design offers excellent regulation fine or coarse modes. Includes three programmable modes of operation. Normal - supplies operate inde-
for low current requirements. Fine/coarse voltage and preset outputs. Fixed 5A auxiliary output on the front pendently. Series - doubles the output voltage at a
current controls allow you to set the desired settings panel allows quick connection to devices. Unit per- given current (ie 60V, 3A). Parallel - doubles the
quickly. Includes croc clip to banana leads. forms self diagnostics to ensure reliable operation. output current at a given voltage (ie 30V, 6A). When
Size: 85W x 160H x 205Dmm. Weight: 1.5kg. Size: 379W x 135H x 280Dmm. Weight: 14.3kg. operating in series or parallel mode, both 0 - 30V out-
puts “track” each other. Size: 379W x 135H x
Features • Fine & coarse adjustments • Adjustable 280Dmm. Weight: 14.3kg.
current limiting • Regulated variable output voltage
• Digital LCD meter • Backlit LCD • 200mV p-p
ripple & noise • <1% ±5mV load regulation.
Power Price Each RRP 2+ 4+ Features • Adjustable current limiting • Regulated
variable output voltage or fixed via 3 presets • Auxiliary
M 8303 3A 159.00 145.00 129.00 fixed output, max 5A • Overload & short circuit protected
M 8305 5A 189.00 175.00 155.00 • Less than 5mV low ripple & noise • 50mV p-p load
regulation • Highly efficient switchmode design
10 0 To 30V, 0 To 3A/5A Features • Dual 0 to 30V @ 0 to 3A supplies • Dual
tracking - series or parallel operation • Auxiliary 1.5 - 6V
Price Each RRP 2+ 4+ @ 5A output for logic circuits • Precision LED meters for
M 8213 1-30V 20A 439.00 419.00 380.00 each supply • Overload & short circuit protected
• Floating outputs • Less than 1mV ripple & noise
• <80mV p-p load regulation. • Variable current limiting
High Current Supplies Price Each RRP 2+ 4+
M 8226 620.00 590.00 555.00
Perfect for experimenting, designing, testing and High current capacity for powering amateur radio Save up to 40%
repairing a wide range of electronic appliances, transceivers, high power equipment or testing invert- with a VIP-Trade Card.
including digital circuits with sensitive regulation ers. Size: 220W x 110H x 220Dmm (M 8222 is
requirements. Precision LCD meters provide accurate 395D). M 8222 Weight: 5.8kg. M 8224 Weight: 3.2kg. If you are in “the trade” and regularly
voltage and current adjustment. Auxiliary 5V & 12V purchase electronic goods for business
fixed outputs are provided via front panel spring purposes, chances are you will qualify
terminals for quick connection. for our Trade Discount. This entitles you
Size 205W x 115H x 230Dmm. 6kg. to the ‘purple price’ listed in this
catalogue, even when you buy a single
Features • Regulated variable output voltage Features • M 8222 1 to 15V @ 60A output • M 8222 piece. Apply online or call us on
• Linear toroidal design • Aux fixed outputs of 5V & equipped with 5A aux output • M 8224 3 to 15V @ 25A 1300 797 007
12V @ 0.5A • Variable current limiting • Digital LCD output • Digital LED meters • Overload & short circuit
meters • Overload & short circuit protected • Floating protected • 5mV ripple & noise • 200mV load regulation.
outputs • Less than 5mV ripple & noise • 20-30mV
±10% load regulation.
Price Each RRP 2+ 4+ Price Each RRP 2+ 4+
M 8200A 3A 229.00 210.00 190.00 M 8222 1-15V 60A 529.00 489.00 460.00
M 8205 5A 249.00 229.00 209.00 M 8224 3-15V 25A 309.00 279.00 250.00
www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999
All prices shown are RRP inc. GST. Transformers 247
Toroidal
TOROIDAL TRANSFORMERS SPECIFICATIONS Powertran® 160VA Toroidal
Fly lead colours for dual secondary toroidals Fly lead colours for dual secondary Sec. Sec.
toroidals with auxiliary 12V & 15V Parallel Series
Blue Red Cat. No. Sec. V 8.9A
ac windings M 5309 9+9 17.8A 6.6A
Sec 1 M 5312 12 + 12 13.3A 5.3A
Primary Black Blue Red M 5315 15 + 15 10.7A 4.4A
240V AC White M 5318 18 + 18 8.8A 3.2A
M 5325 25 + 25 6.4A 2.6A
Sec 2 Sec 1 M 5330 30 + 30 5.3A 1.7A
Orange M 5345 45 + 45 3.5A 2.6A
Black MC5330* 30 + 30 5.3A 2.16A
Brown • Denotes winding start White MC5337* 37 + 37 4.32A
OUTPUT CURRENT Primary Sec 2 Dimensions (OD x ID x H): 104 x 25 x 43mm
Secondaries in Parallel: 240V AC
Current available where secondaries are Orange AS/NZS 61558.2.6 approval: Q050432
connected in parallel. Red *Equipped with additional 12 + 12V and 15 + 15V
Secondaries in Series: AS3108 approval: CS/815/Q secondary windings (500mA max). Please add ap-
Current available where secondaries are Grey Aux 1 prox. 2mm to dimensions for these models.
connected in series. Must be used with a 3A external ac fuse.
Black
White
Brown Grey Aux 2 Selected models available with dual 12 & 15V auxiliary windings. Perfect for
Orange powering a pre-amp in an audio amplifier or similar.
• Denotes winding start Price Each RRP 2+ 4+
Specifications subject to change without prior no- 12 & 15V ac Auxiliary Windings: 160VA Standard 59.95 55.00 49.00
tice. Manufacturers please note, we recommend Although the 12 & 15V auxiliary 160VA With auxiliary windings 62.50 60.00 55.50
that a sample is obtained to confirm suitability. windings have the same sheath
NOTE: All currents listed are ac. For dc currents colours as the main secondary Powertran® 192VA Low Profile Toroidal Sec. V Secondary
please refer to power supply technical data over windings, they may be identified by 24 8A
the page. their lighter gauge wire. Cat. No.
M 5371
General Specifications Maximum temperature rise: 75°C
Primary voltage:
Regulation: 240V ac Dielectric strength: 4000V for 1 Minute Mounting hole diameter: 8mm
Better than 10%
Insulation class: Class B (130˚C) Dimensions (ODxIDxH): 120 x 20.5 x 33mm
Note: ID = diameter of epoxy core bolt recess.
Powertran® 30VA Toroidal Must be used with a 4A external ac fuse.
Sec. Sec. Low profile design suitable for use inside 1RU 19” Rack Enclosures.
Parallel Series
Cat. No. Sec. V 1.6A Price Each RRP 2+ 4+
M 4909A 9+9 3.3A 1.2A 192VA Low Profile 70.00 65.00 60.00
M 4912A 12 + 12 2.5A
M 4915A 15 + 15 2A 1A Powertran® 300VA Toroidal
M 4918A 18 + 18 1.6A 0.8A
M 4925A 25 + 25 1.2A 0.6A
Dimensions (OD x ID x H): 76 x 21 x 30mm Must be used with a 500mA external Cat. No. Sec. V Sec. Sec.
ac fuse. M 5509 9+9 Parallel Series
Mounting Hole Diameter: 7mm Fits inside our 1 Unit 19" rack cases. M 5512 12 + 12 33.3A 16.6A
M 5515 15 + 15 12.5A
AS/NZS 61558.2.6 approval: Q050427 Potted epoxy centre core for easy M 5518 18 + 18 25A
M 5525 25 + 25 20A 10A
AS3108 approval: CS/859/Q mounting. M 5530 30 + 30 16.6A 8.3A Transformers
M 5535 35 + 35 12A 6A
Price Each RRP 2+ 4+ M 5545 45 + 45 10A 5A
ALL 33.00 31.50 29.50 MC5530* 30 + 30 8.5A 4.2A
MC5535* 35 + 35 6.6A 3.3A
Powertran® 50VA Toroidal Dimensions (OD x ID x H): 109x 25 x 57mm MC5540* 40 + 40 10A 5A
MC5545* 45 + 45 8.5A 4.2A
AS/NZS 61558.2.6 approval: Q050432 7.5A 3.7A
6.6A 3.3A
Sec. Sec. AS3108 approval: CS/815/Q
Parallel Series
Cat. No. Sec. V 2.7A Must be used with a 5A external ac fuse.
M 5009 9+9 5.5A 2.0A
M 5012 12 + 12 4.1A 1.6A *Equipped with additional 12 + 12V and 15 + 15V secondary windings (500mA max). Please add approx. 2mm to 11
M 5015 15 + 15 3.3A 1.3A dimensions for these models.
M 5018 18 + 18 2.7A
M 5025 25 + 25 2A 1A Selected models available with dual 12 & 15V auxiliary windings. Perfect for
powering a pre-amp in an audio amplifier or similar.
Dimensions (OD x ID x H): 85 x 24 x 31mm Must be used with a 1A external ac fuse. Price Each RRP 2+ 4+
Fits inside our 1 Unit 19" rack cases.
AS/NZS 61558.2.6 approval: Q050427 300VA Standard 86.95 79.00 72.00
300VA With auxiliary windings 99.95 85.50 79.95
AS3108 approval: CS/859/Q
Price Each RRP 2+ 4+ Powertran® 500VA Toroidals
ALL 32.50 29.75 27.35
Powertran® 80VA Toroidal Cat. No. Sec. V Sec. Sec.
M 5725 25 + 25 Parallel Series
Cat. No. Sec. V Sec. Sec. M 5730 30 + 30
M 5109 9+9 Parallel Series MC5745* 45 + 45 20A 10A
M 5112 12 + 12 4.4A MC5755* 55 + 55 16.6A 8.3A
M 5115 15 + 15 8.8A 3.3A 11.1A 5.55A
M 5118 18 + 18 6.6A 2.6A 9.1A 4.54A
5.3A 2.2A
M 5125 25 + 25 4.4A *Equipped with additional 12 + 12V and 15 + 15V sec-
1.6A ondary windings (500mA max). Please add approx.
3.2A 2mm to dimensions for these models.
Dimensions (OD x ID x H): 127x 26 x 63mm Selected models available with dual 12
& 15V auxiliary windings. Perfect for
Must be used with a 1A external ac fuse. AS/NZS 61558.2.6 approval: Q050432 powering a pre-amp in an audio
amplifier or similar.
Dimensions (OD x ID x H): 90 x 24 x 37mm AS3108 approval: CS/815/Q
AS/NZS 61558.2.6 approval: Q050432 Must be used with a 7.5A external ac fuse.
AS3108 approval: CS/815/Q RRP 2+ 4+
Price Each RRP 2+ 4+ 500VA Standard 129.00 122.00 112.00
ALL 42.00 38.50 35.00 500VA With auxiliary windings 135.00 120.00 110.00
Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au
248 Transformers All prices shown are RRP inc. GST.
EI Core
Powertran® EI Core Transformers i 6V Single Winding 150mA Max 32
6V 37
0V
Manufactured to stringent quality control procedures, all Powertran E-I
transformers are fitted with an internal primary thermal fuse*, ensuring 47 32
maximum safety. However we recommend that an external primary fuse 55 9
should be fitted where indicated. The value of the fuse should match the
recommended value indicated for each model. Thermal 6V Primary voltage: 240V ac
Fuse
The transformers performance is exceptional, with excellent regulation and Total VA rating: 0.9VA
temperature rise characteristics. An extensive range of voltage and current 240V
outputs are available. Insulation: Class E (120˚C)
The entire range have been tested and approved to the Australian standard Magnetising current: <25mA
AS/NZS 61558.2.6. This standard is equivalent to the European standard
EN61558.2.6 making the transformers suitable for the European market Temperature rise: <65°C
(where 240V is used). This replaces the old Australian standard, AS3108.
0V Regulation: 10%
*Note: if internal fuse is overloaded, the entire transformer must be replaced.
M 2835L 0.9VA, Max 150mA. External ac fuse: Not required (thermal fuse fitted)
Secondary voltages available:
Weight: 110g
Voltage Current ac
6V 150mA Primary connection: 200mm fly leads
Transformer Data Price Each Secondary connection: 200mm fly leads
M 2835L
A transformers VA rating is calculated by multiplying the secondary ac voltage AS/NZS 61558.2.6 approval: Q042028
and the secondary ac current. For example, a 24V, 2A transformer would have
a rating of 48VA. Fig. 1 shows a full wave, centre tapped, rectifier circuit, RRP 4+ 10+
allowing more current at a lower voltage (for the same VA rating) than the 7.45 6.95 6.45
standard full wave bridge arrangement shown in fig. 2. Fig. 3 shows a half
wave rectifier with a capacitor filter. 9V Centre Tapped 150mA Max
35
TXFMR D1 + 4.5V 37
CAP 32
LOAD 0V
4.5V
D2
- 47
58
Fig.1 Full wave rectifier
Volts dc = 0.71 x Volts ac. Amps dc = Amps ac 10
Thermal 9V Primary voltage: 240V ac
Fuse 4.5V
CT Total VA rating: 1.35VA
240V
Insulation: Class E (120˚C)
+ Magnetising current: <35mA
CAP
0V Temperature rise: <60°C
Transformers M 2840L 1.35VA, Max 150mA. Regulation: 8%
TXFMR LOAD External ac fuse: Not required (thermal fuse fitted)
Secondary voltages available: Weight: 135g
Voltage Current ac Primary connection: 200mm fly leads
BRIDGE - 4.5V 150mA Secondary connection: 200mm fly leads
9V 150mA AS/NZS 61558.2.6 approval: Q042028
Fig.2 Bridge rectifier Price Each RRP 4+ 10+
Volts dc = 1.41 x Volts ac. Amps dc = 0.62 x Amps ac M 2840L 7.90 6.25 6.00
11 D1 +
24V Centre Tapped 150mA Max
TXFMR CAP LOAD
- 46 43
12V 36
Fig.3 Half wave rectifier 0V
Volts dc = 1.41 x Volts ac. Amps dc = 0.28 x Amps ac 12V
Volts ac = Transformer secondary voltage 55
Volts dc = Supply output voltage 67
Amps ac = Transformer max secondary current
Amps dc = Maximum supply output current 16
Thermal 24V Primary voltage: 240V ac
Fuse 12V
CT Total VA rating: 3.6VA
240V
Insulation: Class E (120˚C)
Magnetising current: <40mA
! Temperature rise: <65°C
Important Note For Wholesale Customers 0V Regulation: 12%
All prices listed in this catalogue are RRP “retail” prices. To M 2854L 3.6VA, Max 150mA. External ac fuse: Not required (thermal fuse fitted)
access our competitive wholesale pricing scheme apply for an Secondary voltages available: Weight: 235g
account via www.altronics.com.au or phone 1300 780 999. Voltage Current ac Primary connection: 200mm fly leads
12V 150mA Secondary connection: 200mm fly leads
24V 150mA AS/NZS 61558.2.6 approval: Q042028
Price Each RRP 4+ 10+
M 2854L 8.90 6.95 6.75
www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999
The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.
2014-15 altronics Catalogue
Discover the best professional documents and content resources in AnyFlip Document Base.
Search