2014-15 altronics Catalogue

All prices shown are RRP inc. GST. Test & Measurement 149

Digital Multimeters

new

2 year 2 year 2 year Test & Measurement
warranty warranty warranty

Autoranging Datalogger DMM Autoranging Datalogger DMM Earth Resistance Meter 5

An autoranging multimeter featuring an optically iso- This top quality auto ranging meter is capable of log- This professional earth resistance measurement kit
lated USB interface and Windows® software. The op- ging measurements to an internal memory for later provides everything the electrical contractor requires
tical adaptor ensures the DMM is electrically isolated review. The push button control layout employed al- to ensure a quality grounding of buildings, structures
from the PC, so no damage can occur to the com- lows easy one handed operation. The LCD simultane- and equipment. It is also suitable for identifying
puter should there be a fault in the circuit under test. ously displays date, time, bar graph and the grounding issues in older buildings where an effective
It also measures temperature, frequency, capaci- measured reading. A backlight is provided allowing earthing may have degraded over time or after lighting
tance, ac/dc voltage & current up to 10A. Includes PC you to work in low light. It samples at a rate of 3 strikes. Earthing is of paramount importance to elec-
software, high quality rubber insulated test leads, tem- measurements per second for up to 11 minutes of trical safety within buildings and soil resistance meas-
perature probe and is housed in a shock-proof rubber recorded data. It is capable of measuring resistance, urement is an essential part of the electrical safety
coated case. frequency, duty cycle, capacitance, continuity, ac/dc code. Measurement is achieved by injecting a small
Data Acquisition: The USB interface and software al- voltage and current up to 10A. In addition, data hold current into the soil via the included ground spikes. A
lows you to log and store measurements for later and relative measurement modes are also provided. direct replacement for conventional hand generator
analysis. This is particularly useful for monitoring the Includes high quality rubber insulated test leads and type testers, it may be used to measure earthing in
performance of battery chargers or dischargers, timed is housed in a shock-proof rubber coated case. electrical equipment or general soil resistance meas-
circuits or other quantities that change with time. uring. Includes carry case, four ground spikes, three
Suits Windows® XP, Vista, 7. long croc clip leads (red, yellow, green), short croc
clip leads (red, green) & spike test probes.
Features • Auto ranging • Datalogging to internal mem-
Features • Auto ranging with override • Auto power off ory • Min/max recording • Push button controls
• USB Interface • Duty cycle % range • Data hold & rel- • Duty cycle % range • Bar graph display • Data hold
ative modes • Bar graph readout • Continuity buzzer & and relative modes • Continuity buzzer and diode check
diode check • Battery included • Cat II 1000V • Battery included (2xAAA) • Frequency measurement
• Time & date display • Auto power off • Cat III 600V.
SPECIFICATIONS

Voltage dc: 400mV, 4V, 40V, 400V (±0.5%+4d) SPECIFICATIONS

Voltage ac: 400mV, 4V, 40V, 400V, 750V (±0.8%+10d) 600mV, 6V, 60V, 600V (±0.5%+4d),
1000V (±1%+4d)
Current dc: 400µA, 4000µA, 40mA, 400mA, 4A, 10A Voltage dc: Kit includes ground spikes and connection leads.
(±1%+10d)
Voltage ac: 6V, 60V, 600V (±0.8%+10d), 750V (±1%+6d)

Current ac: 400µA, 4000µA, 40mA, 400mA, 4A, 10A Current dc: 60mA, 600mA (±1%+10d), 6A, 10A (±1.2%+10d) Features • Easy to read jumbo readout • Backlighting
(±1.5%+10d) • Automatic zeroing • Fast 2.5 readings per second sam-
Current ac: 60mA, 600mA (±1.5%+10d), 6A, 10A (±2.5%+15d) pling • Over range indicator • Auto power off • Data hold
400 , 4k , 40k , 400k , 4M , 40M button • Cat III 1000V
Resistance: (±0.8%+4d) Resistance: 600, 6k, 60k, 600k, 6M (±0.8%+4d),
60M (±1.2%+10d)
100Hz, 1000Hz, 10kHz, 100kHz,
Frequency: 1MHz, 30MHz (±0.5%+4d) Capacitance: 40nF, 400nF, 4µF (±3.5%+8d), SPECIFICATIONS
40µF, 200µF (±5%+10d)
Duty Cycle: 0.1% to 99.9% Earth resistance: 20 (±2%+10d), 200 , 2000 (±2%+3d)
Duty cycle: 0.1% to 99.9%
Capacitance: 40nF, 400nF, 4µF, 40µF, 200µF (±3.5%+8d) Earth voltage: 200V (±3%+3d)
10Hz, 100Hz, 1kHz, 10kHz, 100kHz,
Continuity: <50 , Audible tester Frequency: 1MHz, 20MHz (±0.3%+2d) Voltage dc: 1000V (±0.8%+3d)

Diode test: Test Current 1mA Continuity: <50 , Audible tester Voltage ac: 750V (±1.2%+10d)

Temperature: -20°C to 400°C, 400°C to 1000°C (±1%+5d) Diode test: Test Current 1mA Resistance: 200k (±1%+2d)

Display: 3.75 digit LCD, 4000 count Display: 3.75 digit LCD, 5999 count Display: 3.5 digit LCD, 1999 count, backlit

Protection: 10A M 205, 400mA M205 Protection: 10A M205 Dimensions: 92W x 50D x 200H

Dimensions: 95W x 48D x 192H mm Dimensions: 91W x 49D x 185H

Price Each RRP 2+ 5+ Price Each RRP 2+ 5+ Price Each RRP 2+ 4+
Q 1079 Q 1071A Q 1235
Q 1055 Carry Case to suit 89.95 80.00 75.00 Q 1055 Carry Case to suit 89.95 80.00 75.00 199.00 190.00 180.00
6.50 5.85 5.20 6.50 5.85 5.20

Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au

150 Test & Measurement All prices shown are RRP inc. GST.

Insulation Testers

Test & Measurement 2 year 2 year 2 year
warranty warranty warranty

Combination Insulation Tester Insulation Tester Autoranging Insulation Tester
& True RMS Digital Multimeter
Insulation testers measure the electrical insulation Also measures voltage and resistance in a single
This 6000 count autoranging meter combines both in- strength between two conductors by applying a high compact autoranging unit.
sulation testing and digital multimeter functions in one voltage across them and measuring any current that
handheld unit. It offers insulation test voltage of 250V, flows. This is to test for “leakage” paths and Insulation testers measure the electrical insulation
insulation breakdown in electrical circuits. eg checking strength between two conductors by applying a high
5 500V and 1000V in addition to ac/dc voltage meas- house wiring for leakage between active and neutral voltage across them and measuring any current that
conductors or testing electrical appliances such as flows. This is to test for “leakage” paths and insula-
urement to 1000V, resistance, frequency, capaci- toasters, irons etc. This model features two resistance tion breakdown in electrical circuits. eg checking
tance, temperature and continuity. A great all-in-one test ranges; 200M and 2000M with four test house wiring for leakage between active and neutral
meter for electricians and service technicians. voltages on each range; 100V, 250V, 500V and conductors or testing electrical appliances such as
Internal memory allows storage of up to 99 readings 1000V. It also has auto power off to maximise battery toasters, irons, electric motors etc. Capable of meas-
for later recall. Supplied with a special adaptor en- life. The included high quality PVC test leads are uring between 2M and 2000M at 250, 500 and
abling testing of SMD capacitors and diodes. Also in- designed specifically for insulation tester use and 1000V. Also includes ac voltage, resistance range,
cludes two sets of high quality test leads, one for high have removable alligator clip adaptors. Supplied with auto power off and LCD backlight. Provided with three
voltage insulation testing, and the other for general rubber holster and soft protective carry case. high voltage test leads, two test probes and one large
DMM use. Housed in a rubber holster for added pro- croc clip lead. Housed in a robust plastic case and in-
tection. Supplied in canvas carry case. cludes a soft protective carry case.

Features • Insulation testing at 250, 500 and 1000V, Features • 200M and 2000M ranges • Backlit Features • 2M - 2000M range • ac voltage and
0.2M to 2.00G • Capacitance measurement • LCD readout • “Push to test” activation • Auto power resistance • Backlit LCD readout • “Push to test” activa-
ac/dc voltage and current • True RMS ac • Backlit off • Rubber holster • Data hold • High quality tion • Auto power off • Tough plastic casing, plus soft
LCD readout • Resistance • Frequency • Temperature silicon leads • Alligator clip lead adaptors • Battery carry case • High quality test probes • Batteries
measurement • Continuity checker • Diode check included • Cat II 600V included • Cat II 600V
• Data hold with 99 save memories • “Push to test”
activation • Auto power off (15 min) • Auto/manual SPECIFICATIONS 200M , 2000M (±3%+5d) SPECIFICATIONS 2M - 2000M
ranging • Cat III 1000V, Cat IV 600V • Rubber holster Insulation test range: 100V, 250V, 500V, 1000V Insulation test range: 250V, 500V, 1000V (3% +3d)
included • Temperature probe included Test voltage: 3.5 digit, 1999 count Test voltage: 200 (1% +3d)
• Batteries included Display: Resistance: 700V (1.5% +5d)
Dimensions: 93W x 55D x 201H mm Voltage ac: 50 threshold, audible tone
SPECIFICATIONS Continuity: 3.5 digit, 1999 count
Display: 6 x AA
Insulation test range: 200M , 2000M (±3%+5d) Battery:
Dimensions: 110W x 168L x 65H mm
Test voltage: 100V, 250V, 500V, 1000V (±3%+5d)

Voltage dc: 6V, 60V, 600V, 1000V

Voltage ac: 6V, 60V, 600V, 1000V

Current: 60mA, 600mA Price Each RRP 2+ 5+ Price Each RRP 2+ 5+
Q 1242A Q 1244
Ohms: 600 , 6k , 60k , 600k , 6M , 99.00 89.00 79.00 149.00 135.00 125.00
40M

Continuity: 30 threshold, audible tone Pre order online &
pick up in store.
Diode test: Test current 1mA max !Important Note For
Our website offers convenient 24/7
Frequency: 60Hz, 600Hz, 6kHz, 60kHz, Wholesale Customers online shopping - even if you don’t
600kHz, 1MHz need your order delivered. Simply
All prices listed in this catalogue are select “pick-up” when ordering and
Capacitance: 10pF, 100pF, 1nF, 10nF, 100nF RRP “retail” prices. To access our your goods will be ready to go when
competitive wholesale pricing scheme you arrive at the store. Conditions apply
Temperature: -40°C to 537°C apply for an account online or phone
1300 780 999.
Display: 4 digit, 6000 count, backlit

Protection: 1A 3AG fused on current range

Dimensions: 80W x 45D x 185H mm

Price Each RRP 2+ 4+
Q 1246
249.00 225.00 200.00

www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999

All prices shown are RRP inc. GST. Test & Measurement 151

Logic Analyser & Benchtop DMM

2 year new Test & Measurement
warranty

True RMS Benchtop Multimeter Zeroplus® Multi-Protocol Logic Analysers 5

For serious service departments and circuit development, a dedicated benchtop pre- A logic analyser is an electronics workbench essential for those involved in developing
cision digital multimeter is invaluable. The Q 1520 is a professional instrument with digital designs. They provide powerful simulation and analysis functions for verifying
a large, easy to read 5999 count backlit LCD. Includes USB & RS-232 interfaces and complex discrete logic. With advanced triggering capabilities a logic analyser is very
software for interfacing to a PC. Has a host of features including frequency counter, useful to display the relationships between many signals in a digital system. These
data hold, min/max display and capacitance measurement. Operates from 240V units connect to your PC via USB and provide a complete suite of analysis tools. They
mains power or internal batteries (6 x ‘C’ size not included). Supplied with test leads, include protocol decoder plug-ins for 12C, SPI, UART, 7-Segment and many more. An
temperature probe adaptor, USB and RS-232 leads, which all store neatly in the top additional 30 free protocol decoder plug ins can also be downloaded. The Logic Cube
of the unit. The case features a built-in stand/handle for ease of transport when you has in-built waveform compression which increases the effective memory capacity far
need to go mobile. beyond the physical memory provided. Available in 32K bits or 128K bits memory
depth per channel. Windows 2000/XP/Vista/Vista64/Win7-32/Win7-64.
Features • True RMS mode • 5999 count LCD • RS-232 and USB interface to PC
• Windows software supplied • Large back lit display • Battery or mains power • MAX/MIN Features • Includes 2 x 8 channel signal connectors, 1 x 2 channel signal connector, 1 x 1
display modes • Transistor tester • Frequency counter to 50MHz • Capacitance measure- channel signal connector • 20 test hook grips in 10 colours • Powered by USB • 75MHz
ment • Temperature mode (°C/°F) • Continuity and diode test • Sleep mode • Fused bandwidth • 30 additional protocol decoder plugins of your choice for free (downloadable)
10A input • Data hold and run mode • Low battery indicator • Overload protection • USB
& RS-232 cables included • Cat IV 1000V

Typical screen snapshot of the Includes a powerful PC analysis suite to make debugging and logic simulation easy.
Windows® software. It allows
SPECIFICATIONS data logging with variable SPECIFICATIONS Q 2200 Q 2204
Voltage dc: sampling time and displays a Sample rate (internal): 100Hz - 100MHz 100Hz - 100MHz
Voltage ac: graph of the measured value Sample rate (external):
Current dc: over time. Bandwidth: 100MHz 100MHz
Current ac: Working voltage range: 75MHz 75MHz
Resistance: 600mV, 6V, 60V, 600V, 1000V (±0.3%+2d) Memory: -6V to +6V (±0.1V) -6V to +6V (±0.1V)
Frequency: 600mV, 6V, 60V, 600V, 1000V (±0.6%+5d) Memory depth (per ch.): 1MBit 2MBit
Capacitance: 600µA, 6mA, 60mA, 600mA, 10A (±0.5%+3d) Memory depth (w/compression): 32KBit 128KBit
Continuity: 600µA, 6mA, 60mA, 600mA, 10A (±1%+5d) Trigger channels: Up to 16MBit (max.) Up to 32MBit (max.)
Diode test: 600 , 6k , 60k , 600k , 6M , 60M (±0.5%+2d) Maximum input voltage:
Temperature: 10Hz to 50MHz (±0.1%+3d) Impedance: 16 16
Display: 6nF, 60nF, 600nF, 6µF, 60µF, 600µF, 6mF (±2%+5d) Data skew: ±30V ±30V
Protection: Audible tester Dimensions: 500k Ohms/10pF 500k Ohms/10pF
Dimensions: Included <1.5ns <1.5ns
-40°C - 1000°C (±1%+3d) 130 x 100 x 30mm 130 x 100 x 30mm
Price Each 4.5 digit LCD, 5999 count, backlit
Q 1520 500mA fuse on mA, 10A fuse on 10A Decoder plugins included: • 1-Wire • CAN 2.0B • IRDA • 3-Wire • JTAG 2.0 • PS/2
• SSI Interface • Manchester • Miller • SPI Compatible (Atmel Memory) • UART (RS-
240W x 310D x 105H 232C/422/485) • SPI • 7-Segment LED • USB 1.1 • LCD1602 • Digital Logic • Arithmetical
RRP 2+ 4+ Logic • Microwire • I2C (EEPROM 24L) • Up Down Counter • Microwire (EEPROM 93C)

299.00 269.00 239.00 Price Each RRP
Q 2200 16 Channel 32K
Q 2204 16 Channel 128K 185.00
559.00

Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au

152 Test & Measurement All prices shown are RRP inc. GST.

Datalogger & DSO

Test & Measurement 2 year 3 year
warranty warranty

50,000 Count Datalogger DMM 20MHz Multifunction DSO

This high accuracy datalogger is ideal for use in R&D, engineering or service centres. Combines the functionality of a 2 channel digital storage oscilloscope (DSO) and an
A basic accuracy of 0.05%, coupled with a 50,000 count resolution provides unparal- isolated true RMS 6000 count multimeter. Measurements can be uploaded to a PC
leled performance for technicians testing modern digital devices. The screen displays via USB. Displays both wave shape and voltage measurements simultaneously. Multi-
meter features include an auto ranging 3 5/6 digit 6000 count with true RMS meas-
5 the measured value, time & date plus min & max readings. It also includes an analog urement. Plus, a 43 segment analogue bargraph display, data hold, capacitance and
diode test function. In-built memory and recall allows 4 previous measurements to be
bar graph display. Ranges include ac & dc volts, current, resistance, capacitance, viewed.
duty cycle, frequency and temperature. Ambient room temperature may be measured
without the use of a thermocouple. 18,000 points can be recorded and retained in Features • True RMS multimeter • Easy menu driven operation • Battery (6 x AA) or ac
the inbuilt memory with time and date stamping. Events can be reviewed on screen mains • 3 5/6 Digit 6000 count DMM • USB interface • Horizontal waveform pan and
or downloaded to a PC. Software also allows function and range selection when zoom • Includes multimeter leads, 2 x scope probes, temp probe, ac adaptor, rubber holster
meter is connected via USB. Includes carry case, probes, USB lead, thermocouple • Cat III 600V Rated (multimeter), Cat III 300V rated (scope). • Save configs & waveforms
and software. • Sample, peak detect and average sample modes • Auto or manual ranging • Waveform
math functions
Features • True RMS mode • Windows software supplied • Multifunction display & analog
bar graph • Datalogger memory 18,000 points • Auto calibration • Auto power off & ‘keep SPECIFICATIONS 200ms/sec (100ms/ch.)
on’ mode • Data hold & run mode • Low battery indicator • Overload protection for all Sampling: 1M
functions (including 10A range) • Compare (GO/NOGO) mode and trend plotting • Clock Input impedance: 8 bit
and calendar • Backlit display • Period duty cycle measurement • Pulse width measure- Vertical resolution: 5mV/div-100V/div (±5 div)
ment • 20M resistance & capacitance • Cat II 1000V, Cat III 600V Vertical sens.: 50ns- 50s /div (20 div)
Horiz sweep: Normal, Single, Roll, Auto
SPECIFICATIONS 500mV, 5V, 50V, 500V, 1000V (±0.05%+5d) Trigger: ±10div from centre
Voltage dc: 500mV, 5V, 50V, 500V, 1000V (±0.75%+20d) Trigger range: ±3%
Voltage ac: 500mA, 10A (±0.05%+5d) Accuracy: 0.6V-1000V (.1%+10d)
Current dc: 500mA, 10A (±0.75%+5d) Voltage dc: 6V-600V (±0.75%+10d)
Current ac: 500, 5k, 50k, 500k, 5M, 20M (±0.8%+4d) Voltage ac (T/RMS): 10A dc, 600A ac (with adaptor)
Resistance: 5nF, 50nF, 500nF, 5µF, 50µF, 500µF (±4%+15d) Current: 60nF - 300µf (2%+10d)
Capacitance: 0.1% to 100% (±0.05%+2d) Capacitance: 600 -60M (0.5%+10d)
Duty cycle: 100Hz, 1kHz, 10kHz, 100kHz, Resistance: 0-600°C
1MHz, 10MHz (±0.05%+2d) Temperature: 0-600psi/Kpa
Frequency: -20 to +1370°C (±5%+3d) Air pressure: Less than 60
<100 , Audible tester Continuity test: 125Kb per channel
Temperature: Test Current 2.5mA Max record length: 107W x 220H x 55D, 1kg
Continuity: 4.5 digit dot matrix LCD, 50,000 count, backlit Size:
Diode test: 10A M205 RRP
Display: Price Each
Protection: 105W x 34D x 200H Q 0101 20MHz Wens 820B 649.00
Dimensions: Q 0106 Spare NiMH battery
Q 0107 12V car power adaptor 79.95
Price Each RRP 2+ 5+ Q 0109 Temperature sensor 59.95
Q 1198 Q 0110 ac clamp meter adaptor 59.95
349.00 329.00 299.00 119.00

Important Note For Wholesale Customers !

All prices listed in this catalogue are RRP “retail” prices. To access our competitive wholesale pricing scheme apply for

an account via www.altronics.com.au or phone 1300 780 999.

www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999

All prices shown are RRP inc. GST. Test & Measurement 153

DSO & Function Generator

Atten® LCD Digital Storage Oscilloscopes

Perfect for those in R&D, product development or service of complex electronic equip-
ment. These compact benchtop oscilloscopes feature 2 channels with real-time sam-
pling modes of 500MS/s or 1GSa/s (50GS/s equivalent sampling rate). The 64K colour
TFT display offers a crisp display of both waveforms. The screen can be set up to simul-
taneously display the waveform plus indicate the measured wave voltage, peak to peak
plus RMS, frequency, duty cycle etc. Using the USB lead and software supplied you are
able to make realtime adjustments of the scope via the computer. Any stored data or
settings can be either saved to a USB stick or downloaded direct to a PC. If connected to
a PictBridgeTM compatible printer, screenshots can be directly printed without connection
to a PC. There is a comprehensive onboard help menu for ease of use. Being digital the
overall size & weight is about 75% less than traditional CRT oscilloscopes.

SPECIFICATIONS Q 0200B Q 0203 new
Bandwidth:
Rise time: 25MHz 100MHz
Sample rate:
Vertical sensitivity: 14ns 3.5ns 2 year
Record length (max): warranty Q 0200B
Trigger type: 1GSa/s or 500MSa/s
Auto wave measurements:
Ports: 2mV/div - 10V/div(1-2-5 order)
Mathematics:
Display: 1500 frames 2500 frames Features • 2 channel DSO • Clear, crisp TFT 64K colour display screen • 500:1 display
Input Voltage: contrast • Supplied with 2 x probes, Easyscope 3.0 software & USB lead • Screenshot printing
Dimensions: Edge, Pulse, Video, Slope, Alternate via USB PictBridgeTM • Multiple user languages • Waveform intensity & grid brightness
Weight: adjustments • Pass/fail function • Digital filter function • Waveform recorder • Edge, pulse,
32 parameters video, slope and alternative trigger functions • Memory depth 2Mpts (1GSa/s) • Automatic Test & Measurement
waveform scaling • Maths functions (add, subtract, multiply, FFT, divide)
USB, USB host & RS-232C

+, - , divide, multiply, FFT

178mm (7”) Colour TFT 800 x 480 pixels

100 - 240V ac Price Each RRP 2+
Q 0200B 25MHz
399W x 149H x 110D mm Q 0203 100MHz 599.00 569.00
899.00 809.00
2.3kg

Professional Function Generator

One of the most versatile pieces of test equipment you can own. It provides a 5
consistent waveform output, useful for checking response of audio circuits etc. This
digital function generator has an in-built frequency counter, as well as functioning as a
standard waveform generator with sinusoidal, triangle and square wave outputs.
A dc offset adjustment allows the waveform to be shifted above or below 0V. Output
amplitude is adjustable from 0 to 10V p-p via front panel control, with a switchable -
20dB attenuator. Output frequency is adjustable between 0.03Hz to 3MHz via front
panel rotary dial over seven ranges. It has an external sync output for synchronising
other test equipment to the signal generator, such as CROs and logic probes. This allows
observation of phase shifts relative to the signal generator output. It also features a 3
MHz 4 digit frequency counter with external BNC counter input. A self calibration mode
ensures excellent accuracy at all times. Dimensions: 251W x 291D x 91Hmm.

Output 0.03Hz to 3MHz (±5% at 3MHz position) 2 year
Frequency range: 10V p-p warranty
Amplitude:
Attenuator: -20dB ±1dB Features • Sine, square & triangle waveforms • External TTL sync output • Tilt bail arm han-
Impedance: 50 ohm ±5% dle for bench stand angle adjustment • High brightness seven segment LED displays • BNC
Waveforms: Sine, square and triangle input/output connectors • Push button range and waveform switching • 3 MHz frequency
Frequency Counter counter • External voltage controlled frequency • 240V operation
Range: 0.3Hz - 3MHz (Time base accuracy ± 1 count )
Time base: ±20ppm Price Each RRP 2+ 4+
Resolution: 10Hz up to 1Hz. 0.1Hz up to 100MHz Q 1562
Input impedance: 1M 299.00 289.00 279.00
CMOS output level: 4V p-p (±1V) / 14.5V p-p (±0.5V)
TTL output level:
VCF input voltage: 3V p-p, fan out 20 TTL load
VCF input impedance: 0-10V ±1V (100 : 1)
10k ±10%

Important Note For All Customers ! Save up to 40% with an Altronics
VIP-Trade Card.
Our electronic enthusiast staff are generally able to offer valuable
If you are in “the trade” and regularly purchase electronic goods
advice as to applications of our products and components. for business purposes, chances are you will qualify for our Trade
Discount. This entitles you to the ‘purple price’ listed in this
However we cannot be held responsible for any errors, or catalogue, even when you buy a single piece.

misunderstandings which may arise from such advice. We are Apply online at www.altronics.com.au or call us on
1300 797 007
not chartered engineers and do not charge for any technical

opinions offered. We invite customers to seek independent

professional assistance on complex circuits or applications.

Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au

154 Test & Measurement All prices shown are RRP inc. GST.

Test Leads “Parrot” Style Test Hook Probes

Pro Grade Test Pin / Banana Leads Insulation Piercing Test Probe

Shrouded banana plugs and soft silicon rubber con- Pierces insulation for easy measure- Test lead set featuring a spring
struction. Cat III 1KV 10A approved. Strain relief at ment without cutting cables. loaded hook connection for reliable
both ends for long life. Test pins have banana plugs Supplied per piece. & accurate hands free testing. Clips
allowing them to be plugged into test connections. detach from the included banana
plug leads. Cat III 1000V. Sold in
Price Each RRP 4+ 10+ Price Each RRP 4+ 10+ black & red pair. Requires P 0414
P 0406 12.95 11.70 10.40 P 0408 19.95 18.90 17.90 leads for DMM connection.

Pro Grade Test Pin Leads Shrouded Banana Leads Price Each RRP 4+ 10+
P 0409 16.95 15.25 14.40

Replacement IC Test Clips

Test & Measurement Shrouded banana plugs and soft silicon rubber. Cat II Suitable for connecting P 0408 and P 0409 test
1KV 10A. Strain relief at both ends for long life. Each probes to standard DMM inputs. Each plug may be
test pin has a sharpened tip. ‘piggy backed’ to additional test probes.
Sold in red & black matching pair. 80cm length.
Price Each RRP 4+ 10+ Overall length 57mm. With solder connection for wire
P 0407 17.95 15.50 14.00 termination. 1A @ 250V ac.

n P 9180 Red n P 9181 Black

Economy Test Pin Leads Price Each RRP 4+ 10+ Price Each RRP 10+ 50+
P 0414 8.95 8.10 7.65 BOTH 1.35 1.25 1.05

5 new Economy Croc Clip Leads Replacement IC Test Clips

Angled shrouded banana plugs to pin probes.

Price Each RRP 4+ 10+ Replacement banana to croc clip test leads.
P 0404A 7.20 6.35 5.65

Economy Banana To Croc Clips Leads Price Each RRP 4+ 10+
P 0405 3.60 3.25 2.90

Multimeter SMD Test Probe Tweezers Includes 2 leads which are ready to accept a range of
screw-on fittings. Set includes: 4 x croc clips, 2 x pin
plugs, 2 x hand probes, 4 x banana plugs, 2 x fork
connectors.

Shrouded banana plugs and soft rubber construction Price Each RRP 4+ 10+
for long service life. Includes screw on croc-clips. As P 0413 8.95 7.25 7.00
used in the Protek® Q 1098.

Price Each RRP 2+ 5+ Oscilloscope Probes
P 0400 11.95 10.60 9.50

Replacement IC Clip Test Leads Why spend up to $50 on a
standalone SMD component
Quality banana to IC clips ends to suit most tester? When these tweezers These high quality general purpose oscilloscope
multimeters and test equipment. will ‘plug in’ to your existing probes have x1 and x10 input attenuator. 600V max.
digital multimeter!
Price Each RRP 4+ 10+ Identify those impossible to read SMD components! Price Each RRP 2+ 5+
P 0411 Banana to IC Test Clip 6.75 6.15 5.75 Permits on board or standalone testing of surface
mount devices including resistors, capacitors, diodes, Q 0174 dc to 60MHz 39.95 35.95 31.95
inductors etc (dependant on DMM functionality). Q 0176 dc to 100MHz 45.00 42.00 38.00
450mm length. Ideal for R&D, service centres, proto-
typing etc. Cat II 1000V 2A.

K Type Temperature Probe Price Each RRP 4+ 10+ Croc Clip To Croc Clip Leads
P 0417 17.50 15.55 14.70

Suitable for multimeters with a temperature range. Attention Bulk Buyers! Handy test leads. Pack of 10. Contains 2 each of red,
-20 to 1320°C range, ±3% accuracy. white, black, green, yellow.
For extremely competitive wholesale
Price Each RRP 2+ 5+ prices on the items in this catalogue, Price Each RRP 4+ 10+
Q 1127 12.95 11.95 9.50 please contact our parent company P 0415 5.95 5.40 4.80
Altronic Distributors on 1300 780 999.

www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999

All prices shown are RRP inc. GST. Test & Measurement 155

Component Analysers

Pocket Size Audio Signal Generator Atlas® DCA Pro USB Component Analyser

A highly useful pocket sized signal new
generator for on-site servicing of audio
equipment or for service bench use. 2 year
Generates sine and square waveforms in warranty
46 preset frequencies from 20Hz to
150kHz in two ranges (x1 and x100). Manufactured in the UK
Adjustable amplitude up to 8V peak to peak
on square wave or 1.2V RMS on sine wave. 2 year This advanced semiconductor analyser provides a huge amount of technical data for
Output impedance 600 for direct driving warranty connected components. It automatically identifies part type (eg: transistor, JFET,
most audio equipment eg amplifiers, IGBT, regulator, zener, diode etc), pin out and performs detailed analysis via PC soft-
mixers etc. Also features a Sync output for ware included on a USB flash drive. Works as a stand alone tester or in conjunction
triggering an oscilloscope. Includes test with your PC. Measures gain, VBE and leakage and provides easy to understand de-
leads. Requires 9V battery (not supplied). tails on a graphical display screen. When connected to a PC via the USB cable, a
range of low current curve-tracing functions can be performed. The Q 2115 is a must
SPECIFICATIONS have addition for the technician involved in R&D, servicing and prototyping design.

Frequencies: 20, 28, 32, 42, 50, 64, 75, 80, 100, 120, 150, 180, 200, 280

320, 420, 500, 640, 750, 800, 1k, 1.2k, 1.5k, 2k, 2.8k, 3.2k, 4.2k, 5k, 6.4k, 7.5k, 8.0k,

10k,12k, 15k, 18k, 20k, 28k, 32k, 42k, 50k, 64k, 75k, 80k, 100k, 120k, 150kHz

Output Impedance: 600 Features • Analyses MOSFET, JFET, IGBT, LED, Zener, diode networks, voltage regulators,
triacs, thyristors, transistors • Measures gain, VBE and leakage • Powerful PC software with
Waveform: sinusoidal or square wave switchable graphing & curve tracing functions • Graphical display screen • Easy connection Test & Measurement

Output Amplitude (Sine) 1.2V RMS

Output Amplitude (Square) 8V peak to peak

Rise & Fall Time: > 5µs Price Each RRP
Q 2115
Dimensions: 80W x 20D x 148H Q 1054 Carry case to suit 259.00
6.35
Price Each RRP 2+ 4+
Q 1542 Atlas® LCR Passive Component Analyser
Q 1055 99.95 89.95 79.95
6.50 5.85
Carry case to suit

10Hz - 2.7GHz Digital Frequency Counter Excellent service
aid for technicians.

5

2 year
warranty

Manufactured in the UK

2 year An advanced tester which greatly simplifies the testing of passive components. Simply
warranty connect the hook probes to the component legs and press test. In seconds the Atlas
LCR will identify the type of component (inductor, capacitor or resistor), plus the
When servicing electronic equipment, it is sometimes required to monitor the fre- value. Additional data such as the DC resistance of an inductor is also shown. The
quency of internal oscillators, frequency references or your own input test signals. test frequency for each component is automatically selected. Includes battery.
This multiple-function counter covers a frequency range of 10Hz to 2.7GHz in two
ranges with separate inputs; Ch A 10Hz to 100MHz and Ch B 100MHz to 2.7GHz. SPECIFICATIONS Peak test current (SC): - 3.25mA / +3.25mA
The wide frequency range makes it suitable for servicing and calibrating RF equip-
ment such as radio mics, CB and amateur transceivers. It features an eight digit LED Resistance: 1 - 2M (±1.0% / ±1.2 ) Test frequency accuracy: ±1%
display, low power consumption circuit design, full input signal conditioning and a
highly stabilised crystal oscillator for accurate measurement. The easy to use front Capacitance:0.5pF-10,000µF (±1.5% / ±1.0pF) Sine purity: Typically -60dB 3rd harmonic
panel push buttons make range selection and identification a breeze. Includes BNC
to croc clip test lead. Dimensions: 230W x 260D x 80Hmm. Inductance: 1µH - 10H (±1.5% / ±1.6µH) Dimensions: 100 x 70 x 20mm

Peak test voltage (OC): -1.05V / +1.05V

Price Each RRP
Q 2110
Q 1054 Carry case to suit 199.00
6.35

Atlas® LCR45 Passive Component Analyser

Features • Easy to read 8 digit LED display • High input sensitivity • Period, frequency new
and pulse count functions • Push button frequency/period and range switching • BNC
input connector Ch 1 • SMA input connector Ch 2 • x20 input attenuator • Display hold 2 year
function • Low pass internal filter (100kHz, Ch 1) • 240V operation warranty

Frequency measurements Period measurements (Channel 1) Manufactured in the UK

Channel 1 Range: 10Hz to 10MHz A new release LCR analyser with higher resolution functions than the Q 2110. With a
new micro, including 12 bit ADCs and new software written from the ground up. This
Input connector: BNC Input sensitivity: 75mV RMS (10Hz - 8MHz), new instrument incorporates advanced maths, based on complex impedance analy-
sis. This allows for enhanced inductor, resistor and capacitor value measurement as
Range: 10Hz to 10MHz, 10MHz to 100MHz 30mV rms (8MHz to 2.4GHz) well as a comprehensive and detailed impedance display.

Resolution: 1, 10, 100Hz selectable 75mV (2.4GHz to 2.7GHz)

Pre-scaled: 10, 100, 1000Hz selectable Attenuation: x1 or 1/20 selectable

Gate time: 0.01s, 0.1s,1s selectable Filter (CH. 1 only): Low pass 100kHz

Channel 2 Input impedance Ch 1: SPECIFICATIONS

Input SMA (SMA to BNC adaptor included) 1M with <35pF shunt Resistance: 1 -2M (±0.1 /1%) Peak test current (SC): - 3.25mA / +3.25mA

Range: 100MHz to 2.7GHz Input impedance Ch 2: 50 Capacitance: 0pF-10,000µF ( ±0.1pF/1.5%) Test frequency accuracy: ±1%

Resolution: 100Hz, 1kHz, 10kHz selectable Max input voltage Ch 1: 250V dc, 250V ac Inductance: 0µH-10H ( ±0.1µH/1.5%) Sine purity: Typically -60dB 3rd harmonic

Gate time: 0.01s, 0.1s, 1s selectable RMS (set attenuator to 1/20) Peak test voltage (OC): -1.05V / +1.05V Dimensions: 100 x 70 x 20mm

Max input voltage Ch 2: 3V

Price Each RRP 2+ 5+ Price Each RRP
Q 1536 Q 2112
259.00 235.00 209.00 Q 1054 Carry case to suit 225.00
6.35

Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au

156 Test & Measurement All prices shown are RRP inc. GST.

Component Analysers & Impedance Meters

Atlas® ESR PLUS Capacitor Analyser Redback® Impedance Meter

Excellent service An absolute necessity for all PA system
aid for technicians. installers. This impedance meter for
‘dummies’ designed and manufactured by
2 year Altronics calculates and displays speaker
warranty loads in watts. Most impedance meters on
the market display the impedance in
Manufactured in the UK ohms, leaving the installer to calculate the
system wattage. Measures and calculates
Measuring a capacitor's ESR (equivalent series resistance) is a great indicator of ca- loads for both 100V and 70V line systems. 2 year Australian
pacitor condition. The Atlas ESR offers instant results. Just connect the probes and Power is supplied from a 9V battery which warranty Made
press test - no need to worry about polarity! You can even use it in circuit, saving you can be recharged via the inbuilt charging
the trouble of removing capacitors. When testing capacitors out of circuit, the unit will socket. This is suitable for connection to a
also display the capacitance. If a capacitor is charged, the unit will automatically plugpack or car accessory socket. All
carry out a controlled discharge procedure before measuring the capacitance and housed in a compact durable handheld
ESR. Audible feedback during testing provides indication of high or low readings. In- case. 145H x 90W x 25D mm.
cludes GP23AE 12V battery (S 5020). Dimensions: 100 x 70 x 20mm.
Features • Suits 70V and 100V • Calculates load in ohms and watts • 9V battery powered
with recharging port • Compact handheld case • Includes test leads

Test & Measurement Features • Dynamic range of 0.00 to 40.0 • Fine ESR resolution down to 0.01 Price Each RRP 2+ 4+
• Supports 1µF to 22,000µF • Ideal for low DC resistance checking (such as PCB shorts)
• Industry standard 100kHz test frequency • Long life battery included Q 2001 225.00 210.00 190.00
Q 2002 Charger & rechargeable battery to suit 34.95 30.00 27.50
Q 1055 Carry case to suit 6.50 5.85
Price Each RRP
Q 2105 Impedance Meter
Q 1054 Carry case to suit 209.00
6.35

Atlas® Component Analyser

5 2 year
warranty
2 year
warranty
Manufactured in the UK

Could save you hours in looking up component specifications! A must have for serv- A must have for PA installers and audio technicians.
ice technicians, R&D labs and electronic repair shops. Identifies semiconductors in Measuring a transformer with a standard multimeter will not give accurate results
seconds, allowing you to test their condition or find equivalent replacements. It auto- because it is measuring dc resistance, not ac. This invaluable unit has a large
matically identifies and analyses a range of components (see box below). Simply con- 30mm high, backlit display and is fantastic for checking transformers and speaker
nect the test leads (in any order!) to the component and it will analyse the device and impedances. Applies a 30 second test tone signal upon activation of the “test”
display the results on the scrollable multi-page display. Includes battery. button. May also be locked in test mode for continuous tone. Supplied in a safety
yellow plastic case to protect the unit when not in use and includes a soft carry case.
Identifies • Germanium & silicon transistors • JFETs • Low power thyristors & triacs
• Darlingtons • MOSFETs • LEDs • Diodes & diode networks

Price Each RRP Features • 20M , 200 , 2000 ranges • Backlit LCD readout • “Push to test” activation
Q 2100 • Auto power off • Tough plastic casing, plus soft carry case • High quality silicon test
Q 1054 Carry case to suit 110.00 probes • Batteries included
6.35
SPECIFICATIONS Display: 3.5 digit LCD
Accuracy: ±2% reading, ±2 digits
Pocket LED Tester Measurement frequency: 1kHz Size: 110W x 168L x 65H mm

Range: 20 , 200 , 2k

This nifty LED tester allows quick and easy check- Price Each RRP 2+ 4+
Q 2005
ing of LED operation and comparison of brightness 249.00 240.00 225.00

and colour at different current ratings. Five output

currents are available, 2, 5, 10, 20 and 50mA.

Simply insert the LED legs into the appropriate cur- Non contact AC Test Probe & LED Torch

rent for your chosen LED, pull the lever and watch

it light up! A toolbox essential for service techni-

cians, designers and enthusiasts alike! Requires a

9V battery. Australian
Made

Price Each RRP 2+ 4+ This pocket ac non contact tester with torch is a great addition to any toolbox. It
Q 2010 detects live ac voltages from 100V to 600V (50-60Hz). Easy operation allows
19.95 17.95 15.95 detection of live wires without contact. Whenever ac is detected at a power point,
sheathed or bare ended cable, the tester will light up red. This provides an instant
Exclusive Savings Direct To Your In Box indication of which cables or power outlets have lethal high ac voltages present. An
essential test tool for electrical tradespeople, or anyone operating with ac power.
Subscribe to our email newsletter to receive the latest info on Includes 2 x AAA batteries.
new kits, special stock offers & flyer sales. Subscribe online at
www.altronics.com.au Features • ac Voltage detection without contact • Continuity check • LED light • CAT III
1000V rated • Dimensions 176 x 26mmØ

Price Each RRP 2+ 5+
Q 3002
18.95 17.70 15.70

www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999

All prices shown are RRP inc. GST. Test & Measurement 157

Battery & Cable Testing

Lead Acid 12V Battery Tester RRP 2+ 4+ Network Cable Tester RRP 2+ 4+

Provides a quick and easy verification of battery condi- 39.95 36.90 33.90 This compact unit tests continuity, open/short 39.95 35.50 31.50
tion for 12 Volt sealed lead acid (SLA), wet cells, gel 6.50 5.85 and cross wired LAN wiring, modular leads and
cell and AGM batteries. Once the croc clip test leads 4, 6 and 8 way telephone wiring. Will test
are connected, battery capacity can be selected (be- 10Base-T, 10Base-2, RJ45/11, 258A, TIA
tween 5Ah and 80Ah) and a 20A test load is applied. 568A/568B and Token Ring. The LED display
In the event that voltage drops off once load is ap- indicates when faulty wiring is detected. Simply
plied, a reading of ‘insufficient charge’ or ‘defective connect one end of the cable to the main unit
cell’ is returned. and the other end to the remote unit. The
display scrolls through each connection,
Features • Reverse polarity protection • Capacity selection showing the appropriate status of the lead
5Ah-80Ah • Voltage display • Three status LEDs • One- (good, short circuit, straight or crossover).
touch load testing • Powered by battery being tested GP23A 12V battery included.

Price Each Price Each
Q 3215 D 3006
Q 1055 Carry case to suit

Powerpoint Earth Leakage Circuit Breaker Tester Cable Tracer 2 year Test & Measurement
warranty
This device is designed to test a 240V mains power Very useful for locating faulty wiring or con-
point for correct operation, plus simulate an earth versely, confirming correct wiring. The unit
leakage condition to test the Earth Leakage Circuit consists of two parts. The first part is the
Breaker (ELCB) or Residual Current Device (RCD) tone generator that is connected to one end
protecting that power point. It provides ELCB/RCD of the cable via the test leads. The generator
trip testing at 10, 15, 30 and 100mA. Neon can transmit either a single or dual tone sig-
indicators provide instant feedback for electricians nal. The second part is the probe, which is
installing power points, enabling verification of used to identify the other end of the cable.
correct wiring configuration. Requires no power. You simply “probe” around in the area you
suspect. The probe will “sniff” out the appro-
Price Each RRP 2+ 4+ priate cable, even in a bunch of cables.
Q 3005 When it detects the signal transmitted by the
Q 1055 Carry case to suit 19.95 17.70 15.70 generator in the correct cable it emits an au-
6.50 5.85 dible tone. The generator can also be used to
check cable continuity, identify cable faults, 5
determine line polarity and voltages in net-
Digital Battery Analyser works and modular telephone lines. Re-
quires 2 x 9V batteries.
Detects and analyses battery voltage, cold cranking
amperes (CCA), resistance (m ) and battery cell new Features • Single or dual tone signal • 3 modes of operation. • Tri colour LED for telephone
condition. Suitable for use with cars, trucks, busses, line polarity, continuity and voltage. • Built-in test leads; two with croc clips and one with 4 pin
boat, forklifts and motorcycles - anywhere a 12 Volt RJ11 connection • Carry case
lead acid battery is used. Includes heavy duty wide
entry croc clip cables. Very easy to use, simply con- Price Each RRP 2+ 4+
nect to the battery, turn tester on, and press OK to Q 1350
enter the testing modes. 119.00 109.00 99.00

Features • A must have for vehicle servicing • Suits Cable Tracer & Network Cable Tester
lead acid batteries of all types including SLA and deep
cycle • Includes rubber holster • No battery required Combines the functionality of a cable tracer
• Quick and accurate measurement of battery health. and network cable tester in one convenient
unit. The main unit can be connected to an
unidentified pair which injects an audible sig- new
nal down the line. The “tracer” unit may then
Price Each RRP 2+ 4+ be used at the other end of the cable run to
Q 2120 identify the correct conductors. In addition,
169.00 155.00 139.00 patch leads & field wiring may be plugged in-
line between the units to provide instant veri-
Pocket Battery Testers fication of continuity and correct wiring
sequence. Probe includes an LED light for
easy cable identification when in dark areas.
Suits RJ45 and RJ11 leads. Requires 3 x AA
and 1 x 9V batteries.

Q 3200 Q 3202 Features • Headphone socket (earphones included) • Adjustable buzzer volume • Tests
network and phone circuit voltage • LED light on probe • Single or dual tone • Verifies short,
Handy pocket sized testers for checking battery condition. Q 3202 even offers an LCD open or crossed pairs in UTP cables • Confirms integrity of patch leads and field wiring
readout with percentage and bar graph level display. Provides an instant readout to • Includes RJ45 lead & croc clip test lead.
see if your batteries need replacing or recharging. Saves messing around with your
multimeter and test leads! Price Each RRP 3+ 6+
Q 3200: Suits 1.5V AAA, AA, C, D, 9V & Button Cells. Q 1341
Q 3202: Suits 1.2V/1.5V AAA, AA, C, D, 9V & Button Cells. Requires 2 x AAA 99.00 89.00 79.00
batteries (not included).

Price Each RRP 4+ 6+ Order online 24/7, 365 days a year!
Q 3200 Analog Meter
Q 3202 Digital LCD 8.45 7.65 6.80 Easy online ordering at www.altronics.com.au
14.95 13.50 12.00

Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au

158 Test & Measurement All prices shown are RRP inc. GST.

Environmental Monitoring

Professional Cable Tracer & Network Cable Tester Pocket Infra-red Non Contact Thermometer

Combines the functionality of a new
cable tracer and network cable
tester in one convenient unit. The 2 year
main unit can be connected to an warranty
unidentified pair which injects an
audible signal down the line. The An incredibly small IR non contact thermometer, ideal for use in industry, laboratories
“tracer” unit may then be used at & food safety. It’s even suitable to take your childs temperature without disturbing
the other end of the cable run to them! Excellent accuracy and wide measurement range of -50°C to 260°C.
identify the correct conductors. In Automatically retains last measurement when button is released. In-built pocket clip.
addition, patch leads & field wiring Includes 2 x LR44 batteries.
may be plugged inline between the
units to provide instant verification 2 year SPECIFICATIONS -50 to 260°C Basic accuracy: ±2% of reading
of continuity and correct wiring se- warranty IR temperature range: 0.1 deg Optical resolution: 1:1
quence. Suits RJ11, RJ45, USB and IR resolution: 0.95 Spectral response:
F Type, BNC and RCA leads. Re- Emissivity: Dimensions: 500ms & 8-14µm
quires 2 x 9V batteries. 90H x 20Ømm

Features • Single or dual tone • Headphone jack • Adjustable volume • Quickly identifies Price Each RRP 2+ 4+
cables • Verifies short, open or crossed pairs in UTP cables • Confirms integrity of patch Q 1281
leads and field wiring • Supplied with a host of test leads & adaptors in a durable carry case. 28.95 26.15 23.20

Test & Measurement Infra-red Non Contact Thermometer

Price Each RRP 2+ 4+ This handheld IR thermometer offers
Q 1340 laser pointer guide and excellent
219.00 199.00 179.00 accuracy between -50°C and 500°C.
The LCD with backlight indicates the
Coaxial Cable Tester measured reading & emmissivity
value. Simple point and click
5 operation, last reading is automatically new
held on screen when the trigger is
This pocket tester detects DC continuity and short circuits in coaxial leads and cable released. Ideal for use in hard to get to 2 year
runs. It provides LED and audible feedback when testing is complete ensuring or dangerous places, even while warranty
connection integrity. Fitted with male F connector, may be combined with many other equipment is operating eg: measuring
adaptors if required. See “RF connectors” on pages 310-312. The removable tone turbo, exhaust, bearing, motor, air Basic accuracy:
detector, fitted with F type socket, screws into the base ensuring it never gets conditioning temperatures. Also great Optical resolution:
misplaced. Includes GP23AE 12V battery & F type female to female adaptor. for food safety. Includes 9V battery. Spectral response:
Dimensions:
Price Each RRP 2+ 4+ SPECIFICATIONS -50 to 500°C ±2% of reading
Q 1360 IR temperature range: 0.1 deg up to 500°C 12:1
29.95 26.90 24.50 IR resolution:
Emissivity: 0.95 8-14µm
134H x 88W x 36Dmm

Price Each RRP 2+ 4+
Q 1283
49.95 45.00 40.00

HDMI Cable Continuity Tester Professional Infra-red Non Contact Thermometer

Detects faulty wiring in HDMI leads which is Utilises twin laser beams for precise meas-
indicated by the LED display. Simply connect urement. The LCD with backlight indicates
one end of the pre-terminated cable to the the measured reading, max reading and
main unit and the other end of the cable to emmisivity simultaneously. Adjustable warn-
the remote unit. The display scrolls through ing alarms may be set when temperature
each connection, showing the appropriate rises or falls below a set level. Emmisivity
status of the lead. Requires 9V battery for may be adjusted to combat the irradiated IR
main unit only. Includes protective carry case. emitted from differing materials. Ideal for
use in hard to get to or dangerous places,
Price Each RRP 2+ 4+ even while equipment is operating eg:
Q 2030 measuring turbo, exhaust, bearing, motor,
65.00 58.50 52.00 air conditioning temperatures. Also great for
13 Way Cable Tester food safety. For standalone benchtop tests
a K-type temperature probe is included. new
Compatible with 6.35mm jack, 3/5/7/8 pin DIN, Supplied with 9V battery & carry case.
RCA, 3/5 pin XLR, 4P and 8P Speakon, Banana Size: 192H x 95W x 83Dmm. 2 year
plugs, RJ45 and USB. A quick and easy way to con- warranty
firm lead integrity. Constructed from a steel case it
is built to withstand the rigours of professional use. Q 1287 SPECIFICATIONS -50 to 500°C K-Type temp. range: -50 to 1370°C
Equally suited to AV & CCTV installers. An invalu- IR temperature range: 0.1°C Basic accuracy: ±2% of reading
able tool for checking leads in an instant. Requires IR resolution: Optical resolution:
9V battery. Emissivity: 0.1 to 1.0 Spectral response: 13:1
8-14µm

Q 1289 SPECIFICATIONS -50 to 1050°C K-Type temp. range: -50 to 1370°C
IR temperature range: 0.1°C Basic accuracy: ±2% of reading
IR resolution: Optical resolution:
Emissivity: 0.1 to 1.0 Spectral response: 30:1
8-14µm

Price Each RRP 2+ 4+ Price Each RRP 2+ 4+
Q 2022 Q 1287 -50 to 500°C 13:1 Optical Resolution
49.95 47.50 44.50 Q 1289 -50 to 1050°C 30:1 Optical Resolution 99.00 89.95 78.95
175.00 157.50 140.00

www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999

All prices shown are RRP inc. GST. Test & Measurement 159

Environmental Monitoring

Professional USB Infra-red Non Contact Thermometer Digital Lux Meter With Hold Function

A top of the range meter offering incredibly high new A digital light meter to measure As used by
50:1 optical resolution and high 1350°C max ambient light levels. It comprises of CCTV security
temperature. It utilises twin laser beams for pre- 2 year two parts, the photosensor and the consultants, &
cise measurement. The LCD with backlight indi- warranty main handheld meter with display lighting installers.
cates the measured reading, max reading and connected via an extendible
emmisivity simultaneously. Adjustable warning (500mm) curly cord. It has 3 ranges; new
alarms may be set when temperature rises or 2000, 20000 and 50000 lux, and
falls below a set level. Emmisivity may be ad- has a hold switch to freeze the 2 year
justed to combat the irradiated IR emitted from display at the last reading taken. warranty
differing materials. A fast 250ms response Supplied in a vinyl carry case and
time ensures virtually instantaneous measure- includes a protective cover for the 0.4 secs
ment readings. USB datalogging output allows photosensor. Perfect for assessing 9V battery
realtime measurement datalogging with your light levels when installing CCTV & 70W x 29D x 118H mm
PC. Ideal for use in hard to get to or dangerous lighting systems. Requires 1 x 9V
places, even while equipment is operating eg: battery (included).
measuring turbo, exhaust, bearing, motor, air
conditioning temperatures. Also great for food SPECIFICATIONS
safety. Supplied with 9V battery, software &
plastic carry case. Lux: 2000, 20000, 50000 Lux Sampling time:
Power:
Accuracy: 5% ± 2 digits Dimensions:

Spectrum: 500 to 630nm (>80% efficiency) Test & Measurement

SPECIFICATIONS -50 to 1350°C Accuracy: 1% (-50°-500°C), Price Each RRP 2+ 4+
IR temperature range: 0.1°C 1.5% (500°-1350°C) Q 1270A
IR resolution: Optical resolution: 66.95 60.50 53.75
Emissivity: 0.1 to 1.0 Spectral response: 50:1
K-Type temp. range: -50 to 1370°C Dimensions: 8-14µm Wet pH Meter
129H x 126W x 60Dmm

Price Each RRP 2+ 4+ Great for chemistry labs, pool & fish tank owners, soil PH
Q 1291 -50 to 1350°C 10:1 Optical Resolution testing and more!
299.00 270.00 240.00

Digital SPL Meter Why mess around with chemical testers or inaccurate lit-
mus paper? This compact ph meter allows you to quickly
A must for the serious audio installer or enthusiast. and accurately measure the pH level of your swimming 5
This quality sound pressure level meter gives a digital pool, fish tank etc. The extendible probe is simply lowered
readout of the ambient noise level at its microphone. into the water and provides instant measurement. Auto-
Features two ranges: Low (35 to 100dB) and High matic temperature compensation improves accuracy in all
(65 to 130dB), with two built-in weighting curves. A conditions. Supplied with pH neutral buffering solution (al-
and C weighting. Response can be switched between lows meter to be “zeroed” before measurement). Includes
slow or fast. Features a max hold switch, which 2 x 3V (CR2032) lithium batteries. Note: in order to test
displays the highest reading attained. Supplied with soil, substance needs to be wet and/or mixed with water
protective carry case, tripod mounting adaptor and to retrieve accurate readings
mic wind screen. Requires 1 x 9V long life battery
(included). SPECIFICATIONS 0-14.0
Range: ±0.01 + 1 digit
SPECIFICATIONS Lo: 35 - 100dB Accuracy:
Ranges: Hi: 65 - 130dB Resolution: 0.01
Dimensions: 33.5Ø x 170mm
Resolution: ±0.1dB Weight:
Freq. range: 31.5Hz - 8000Hz 85g
Dynamic range:
Freq. weighting: 55dB Price Each RRP 2+ 4+
Accuracy: A&C Q 1296
Microphone: ±1.5dB Q 1055 Carry case to suit 75.00 67.50 60.00
Dimensions: Electret condenser 6.50 5.85
210H x 55W x 32D mm
2 year Professional Digital Anemometer & Thermometer
Price Each warranty
Q 1264 A professional ‘wind meter’ with external
RRP 2+ 4+ sensor on a curly cord which stretches to
1m long. Maximum wind speed is 45m/s
109.00 96.00 89.00 or 162km/h. Ideal for taking quick or con-
stant measurements. Also simultaneously
Pocket Digital SPL Meter displays temperature reading. Ideal for in-
dustrial ventilation monitoring, process
Compact pocket sized SPL meter for general purpose checking, science experiments or simply
checking the wind speed for outdoor activi-
sound level measurement. The wide 40 to 130dB ties. Stores minimum, maximum and aver-
age readings for a given measurement
range is ideal for occupational health and safety test- period. Threaded recess for tripod mounting
inbuilt. Includes 9V battery.
ing in venues, industrial environments, car audio and

home theatres. Fast response time with min/max

function. LCD backlight switches on automatically

when working in dark areas. Includes threaded insert

on rear for tripod mounting. Auto power off.

SPECIFICATIONS Air velocity range: 0.3m/s - 45m/s

Ranges: 40-130dB Temperature range: -20 to +60°C

Resolution: ±0.1dB Air velocity accuracy: ± 3% +0.1m/s

Freq. range: 31.5Hz - 8000Hz Air velocity resolution: 0.1m/s

Freq. weighting: A Sampling time: 1 measurement per second

Accuracy: ±3.5dB Units: m/s, km/h, Knots, mph, new

Microphone: Electret condenser ft/min, cmm, cfm

Battery: 9V (included) Function: Min/max, hold, average, auto power off.

Dimensions: 130H x 52W x 32D mm Dimensions: 175 x 55 x 38mm.

Price Each RRP 2+ 4+ Price Each RRP 2+ 4+
Q 1266 Q 1252
Q 1054 Carry case to suit 39.95 35.95 31.95 159.00 143.50 127.50
6.35 5.80

Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au

160 Test & Measurement All prices shown are RRP inc. GST.

Environmental Monitoring Deluxe USB Wireless Home Weather Station

Digital Anemometer & Thermometer

Commonly known as a wind speed meter, this
anemometer measures wind in various units. Maximum
wind speed is 30m/s or 108km/h. Ideal for taking
quick or constant measurements. Also simultaneously
displays temperature reading. This compact meter is
ideal for industrial ventilation monitoring, process
checking, science experiements or simply checking the
wind speed for kite boarders, wind surfers and model
plane enthusiasts. Threaded recess for tripod mounting
inbuilt. Includes 9V battery.

Air velocity range: 0.4m/s - 30.0m/s new Upgraded model now features a solar powered battery charger transmitter,
Temperature range: -20 to +60°C ambient light measurement and solar UV index.
Air velocity accuracy: ± 3% +0.3m/s RRP 2+ 4+ This fantastic weather station contains all the components you require to monitor the
Air velocity resolution: 0.1m/s latest weather conditions at home. The main base station logs and displays at a
Sampling time: 69.95 62.95 55.95 glance, indoor and outdoor temperature, humidity, barometric pressure, recent rain-
Units: 1 measurement per second fall, wind speed, UV index, ambient light, wind speed and direction. Wind speed and
Function: m/s, km/h, Knots, mph direction, outdoor temperature and rainfall measurements are transmitted wirelessly
Dimensions: back to the main base station inside your home. Maximum and minimum readings
Min/max hold, auto power off. can be recalled simply by pressing the buttons on the front panel. Measurements can
175 x 55 x 38mm. also be displayed in a range of imperial or metric units. Weather alarm functions
may be set for temperature, humidity, wind, rain and air pressure. The unit can also
Test & Measurement Price Each predict future weather trends via monitoring barometric pressure. External sensors
Q 1250 can be located up to 100m from the main base station. Requires 3 x AA batteries.
Software requires Windows 2000/XP/Vista/7.
Digital Moisture Meter

Designed to measure moisture in wood and building

materials this handheld meter can test levels in sawn

timber, plaster, concrete, mortar and many other

hard materials. Great for science experiments at

schools, or for building inspectors and the SPECIFICATIONS Wind speed 0-50m/s (units km/h, mph,
Indoor temperature
handyman looking to monitor damp or moisture Outdoor temperature 0° to 50°C knots, Beaufort)
Resolution -40° to 65°C
5 ingress around the home. Supplied in a zip up Relative humidity Barometric pressure 700-1100hpa
canvas pouch. Requires 9V battery. 0.1°C
1-99% Rainfall 0-9999mm

Luminance range 0-300,000 lux

SPECIFICATIONS 14mm new Features • USB PC connection port • Software shows all logged weather data and current
Probe length: 0.1% conditions • Software displays trends via easy to read graphs • Logs rainfall, temperature,
Resolution: ±1% RRP 3+ 6+ humidity, UV index, ambient lighting, wind speed/direction, air pressure • 12/24 hour clock
Accuracy: with alarm and time zone adjustments • Calendar • Wireless outdoor sensors included
Operating temperature: 0° to 40°C 32.95 29.70 26.40 • Weather forecast icons • Wind chill & dew point measurements • Metric or imperial units
Features: Backlight, low battery indiciator • LED backlighting • Wall or desk mount • Requires 3 x AA batteries (includes 2 x AA
Dimensions: rechargeable batteries for sensors)
153H x 69W x 30Hmm

Price Each Price Each RRP 2+ 4+
Q 1255 X 7062A
199.00 185.00 165.00

Spike Thermometer

A handy ‘instant read’ digital thermometer suitable for a wide array of uses such as Wireless Indoor/Outdoor Weather Station new
monitoring liquids in laboratory, kitchen or BBQ use - great for roasting meats; home
brew setups and more! Stainless steel probe can be wiped clean after use. Includes This compact desk mount weather station RRP
min/max function. °C or °F measurement. 2s sampling time. Min/max hold. Auto measures indoor temperature and outdoor
power off. -40°C to +250°C ±1.5%. Includes LR44 button battery. temperature & humidity. The weatherproof 49.95
remote sensor may be located up to 100m
Price Each RRP 3+ 6+ from the indoor unit and displays
Q 1278 temperature readings. It also includes a
19.95 18.00 16.00 handy alarm clock, calendar and moon
phase indicator. A 12/24 hour clock is also
Dual Display Thermometer & Hygrometer provided. Indoor unit measures 0° to +60°C 3+ 6+
and the outdoor sensor measures -40°C to
Monitor conditions in greenhouses, wine cellars, +65°C with ±1° accuracy and humidity. 45.00 40.00
computer rooms, aircon systems etc. Features Requires 2 x AA batteries for indoor station &
simultaneous display of temperature, humidity 2 x AAA batteries for outdoor sensor.
and clock. Enables storage and recall of
maximum and minimum temperature and Price Each
humidity readings. °C or °F display. Temperature
scale -5°C to +50°C. Humidity range 30% to 90% X 7026
±3% accuracy. Suitable for desk or wall mounting.
Requires 1 x AAA battery (not included). LCD Thermometer
Dimensions: 110H×70W×20Dmm.
A LCD thermometer with easy to read 19mm digits
Price Each RRP and min/max function. Celsius or Fahrenheit RRP 3+ 6+
X 7030 measurement. Compact 50mm case is perfect for
9.95 the kitchen/work bench, cellar, greenhouse etc. In- 6.95 6.50 5.75
cludes 1 x GP186 button battery.
Dimensions: 50 x 50 x 15mm.

Price Each
X 7010

www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999

All prices shown are RRP inc. GST. Test & Measurement 161

Digital In-Ear Personal Health Thermometer Consumer Measuring Equipment

A quick, painless method for taking your childs temperature! This modern, er- Digital Tyre Pressure Gauge RRP 2+ 4+
gonomic personal thermometer is designed for taking body temperature readings
quickly and painlessly. Readings are taken by placing the end of the thermometer in Great for the glovebox, this compact tyre 19.95 17.95 15.95
the patients outer ear and pressing the button for an instantaneous reading. The pressure gauge could increase your tyres 2.95
whole procedure takes just seconds! It features a selectable °C or °F display, a fever longevity. Tyre pressure is directly linked to
alarm, 10 memories and auto power off. Sealed sensor eliminates the need for hy- vehicle handling, braking distances and fuel
gienic covers, simply clean with an alcohol wipe. Includes stand and protective cap. consumption. Measures pressure in PSI, Bar,
Requires 1 x CR2032 button battery (S 4999A). KPA or Kg/cm2. Especially useful for 4WD and
car enthusiasts, caravan and boat owners. Auto
power off. Battery included. Pressure range 2-
99.5 PSI or 0.15 to 7 Bar.

Price Each
Q 1298
S 4999A Button battery to suit.

Price Each RRP 2+ 4+ Armband Digital Blood Pressure Monitor
X 3402
S 4999A Button battery to suit. 34.95 31.45 28.30
2.95

500 Gram Pocket Scales 2 year Test & Measurement
warranty
Perfect for accurately counting components.
Super accurate 0.1g resolution. These compact Traditional style armband blood pressure meter measures systolic, diastolic and heart
scales provide a quick and easy way of accu- rate using the oscillometric method. It is very simple to use and gives a fast, accurate
rately weighing anything up to 500gm. Sized at result of measured blood pressure and heart rate. Simply fits to your upper arm, just
just 125mm long, the unit fits right in your above the elbow, using the adjustable velcro band. Pressing the “Start” button in-
pocket. Housed in a protective plastic cover. flates the band and begins the measurement process. In just seconds, the LCD panel
Perfect for counting small components, connec- displays the results. Features 90 memories, time & date display and a carry case. In-
tors and the like. Batteries included. struction booklet included. Stores readings for 3 people. Includes 4 x AAA batteries.

Features • Zero/Tare function • 4 unit counting modes • 500 gram load capacity 5
• 0.1g 2 digit resolution • Measures in grams, avoirdupois ounces, troy ounces & penny-
weight • Auto power off

Price Each RRP 3+ 6+ Features • Systolic & diastolic readouts • Pulse display • Jumbo size LCD • Adjustable
T 2260 velcro arm cuff • 90 readout memories (30 for each person) • An excellent way to monitor
44.95 40.50 35.95 your health at home

Professional Fuel Cell Alcohol Breathalyser Price Each RRP 2+ 4+
X 4003
Utilises the same fuel cell technology as law en- 59.95 53.95 47.95
forcement devices, this compact breathalyser
provides accurate readings for personal use. Magnetic Digital Kitchen Timer/Stopwatch
Far more reliable and accurate than most
cheap semi-conductor based units. It offers a A simple digital kitchen countdown timer with
reading within 10 seconds. Includes two mouth green backlit LCD. We can’t guarantee you
pieces. Requires 3 x AAA batteries. Dimensions won’t burn your food, but at least the timer will
128H x 62W x 17Dmm. help remind you! Programmable up to 99
minutes, it also features an hour glass LCD
Note: Readings taken with this device are for reference graphic, alarm clock & stopwatch function.
only and for personal use. Errors and variations can Magnetic case, plus flip out desk stand in-built.
occur due to environmental and operating conditions. Requires battery (CR2032) S4999A.
We accept no liability for consequences arising from
using this device.

Price Each RRP 2+ 4+ Price Each RRP
X 0400 X 4010
X 0402 Spare blow tube to suit 119.00 107.00 95.00 S 4999A Button battery to suit. 12.95
1.95 1.75 1.60 2.95

Gas Bottle Level Detector With Torch

new Digital Stopwatch

Keep tabs on how much gas you have left and avoid an embarrassing scene at your A handy digital stopwatch with 1/100th second new
next BBQ. Simply hold the tip against the side of gas tank and slide it downwards accuracy with lap counting function. 12/24 hour
from the top until the gas indicator illuminates (ensure BBQ is not operating). In- clock with AM/PM indicator, month, date and RRP 2+ 4+
cludes a pushbutton torch function to help locate dropped sausages. Requires 1 x 9V day of the week display. In-built daily alarm and
battery to operate (not included). hourly chime functions. Water resistant design. 14.95 13.50 12.00
Suitable for all manner of sports, school science
Price Each RRP 2+ 4+ labs etc. Includes CR2032 battery.
Q 1224
29.95 26.95 24.25 Price Each
X 8100

Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au

162 Tools All prices shown are RRP inc. GST.

Micron Soldering Stations

new

2 year 2 year 2 year
warranty warranty warranty

Includes freestanding Includes freestanding Includes freestanding
iron holder & tip cleaner. iron holder & tip cleaner. iron holder & tip cleaner.

Micron® 60 Watt Soldering Station Micron® 80 Watt Soldering Station Micron® 100 Watt Soldering Station

Ideal entry level, general purpose soldering iron Perfect choice for professionals, manufacturing Heavy duty design perfect for
for students and enthusiasts. & production facilities.
production, service
An electronic temperature controlled soldering station,
Tools An electronic temperature controlled soldering station, designed to meet the needs of production environ- & rework applications.
ments. The increased heating power over the Micron
designed to meet the needs of production environ- 45W station provides increased temperature stability Generates high tip temperatures,
during extended periods of soldering. It features a
ments. It features a slender ‘pencil design’ iron han- slender ‘pencil design’ iron handle with comfortable adjustable from 200°C to 450°C
rubberised grip, connected with a burn-resistant rub-
dle with comfortable rubberised grip, connected with ber lead. Featuring key pad temperature control from suitable for use with lead free sol-
200°C to 480°C, this soldering station eliminates the
6 a burn-resistant rubber lead. Featuring key pad tem- need for changing tips to perform different soldering der. It is also equipped with the
perature control from 150°C to 480°C, this soldering tasks. When set, the iron will maintain tip temperature
to ±5°C. RoHS compliant. latest lead free compatible Japan-

station eliminates the need for changing tips to per- Suitable for use with Mini-Wave tips. See ese made tips. Its power saving
explanation on left.
form different soldering tasks. When set, the iron will mode increases tip life dramati- Optional T 2461
cally by cutting the tip tempera- SMD Tweezers
maintain tip temperature to ±5°C. RoHS compliant.
ture to half after 15 minutes of with Nichrome
Mini-Wave Tips: These fine con-
cave tips allow hand flow solder- not being used. This reduces element.
ing of surface mount devices
(SMD) such as chip caps, resis- power consumption and tip wear.
tors, LEDs, SOIC packages and
PLCC chips. Pencil iron features a high quality ceramic heating el-

ement allowing rapid tip heat recovery and tempera-

ture consistency. Includes 0.5mm tip (T 2463). For

SMD soldering applications the optional T 2461

Features • Designed for RoHS lead free soldering Features • Designed for RoHS lead free soldering tweezer handle can be plugged into the station.
• LED display • Simple key operation • Burn proof iron • LED display • Simple key operation • Burn proof iron
lead • Free standing iron holder with tip cleaner lead • Free standing iron holder with tip cleaner T 2461 is fitted with 2.0mm SMD tweezer tips.
• Temperature adjustable • Temperature ‘offset’ for • Temperature adjustable • Temperature ‘offset’ for fine
accurate calibration • Temperature lockout • Suitable for calibration • Temperature lockout • Suitable for ROHS Features • Designed for RoHS lead free soldering
ROHS compliant soldering • ESD safe and spike free compliant soldering • ESD safe and spike free circuitry • Burn proof iron lead • Digital display for precise tip
circuitry • Grounding socket • High insulation ceramic • Grounding socket • High insulation ceramic heating adjustment • ESD safe and spike free circuitry • Tip
heating element for rapid heat-up and instant recovery element for rapid heat-up and instant recovery temperature from 200 to 450°C • Temp ‘offset’ for
• Slimline & lightweight hand piece. • Slimline & lightweight hand piece. accurate calibration • Temp lockout • Sturdy all metal
construction • High insulation ceramic heating element
SPARE IRON TIPS T 2471 1.0 mini-wave SPARE IRON TIPS T 2471 1.0 mini-wave for rapid heat-up and instant recovery • Slimline &
T 2433 0.2 round T 2472 2.0 mini-wave T 2433 0.2 round T 2472 2.0 mini-wave lightweight hand piece suitable for all day use • Includes
T 2434 0.8 round T 2473 3.0 mini-wave T 2434 0.8 round T 2473 3.0 mini-wave iron stand with dry tip cleaner • Auto sleep function
T 2435 1.6 chisel T 2435 1.6 chisel
T 2436 3.2 chisel T 2436 3.2 chisel SPARE IRON TIPS T 2392 2.0 SMD tweezer
T 2462 0.2 round T 2393 3.0 SMD tweezer
Note: These tips also suit old models T 2438 & T 2442. Note: These tips also suit old models T 2438 & T 2442. T 2463 0.5 round T 2394 5.0 SMD tweezer
T 2464 1.6 chisel T 2395 10.0 SMD tweezer
SPECIFICATIONS SPECIFICATIONS T 2465 2.4 chisel
Voltage input: 220 - 240V ac Input: 220 - 240V ac T 2466 3.2 chisel
Heater: 32V ac ceramic element Heater: 32V ac ceramic element
Heater insulation: Heater insulation: SPECIFICATIONS 240V ac
Nominal power: > 100MW Nominal power: <100M Voltage input 32V ceramic
Temp. range: 60W Temperature range: 80W Heater voltage
Temp. correction range: Temperature correction range: Power 100W
Heat up time: 150 - 480°C Heat up time: 200°C to 480°C Temperature range 200 to 450°C
Leakage voltage: +99° to -99°C Leakage voltage: +99° to -99°C Heat up time 400°C 15s
Weight: Weight: <45sec Leakage voltage
Tip to ground resistance: 60s Tip to ground resistance: <0.4mV Weight < 2.0mV
< 0.4mV 1.7kg 2.5kg
<0.1
1.8kg Price Each RRP 2+ 5+
< 0.1 235.00 209.00
T 2460 100W 259.00 109.00
Price Each RRP 2+ 5+ Price Each RRP 2+ 5+ T 2461 SMD Tweezer Handle 119.00 99.00
105.00 95.00 159.00 149.00 T 2433-T 2436 Standard tips 10.75
T 2417 60W 115.00 T 2418 80W 169.00 T 2471-T 2473 Mini-wave tips 23.95
T 2433-T 2436 Standard tips 10.75 T 2433-T 2436 Standard tips 10.75
T 2471-T 2473 Mini-wave tips 23.95 T 2471-T 2473 Mini-wave tips 23.95

www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999

All prices shown are RRP inc. GST. Tools 163

Thermaltronics Soldering Stations

Thermaltronics® Curie Heat Technology Soldering Stations

CURIE HEAT TECHNOLOGY by Thermaltronics is fast replacing the older conventional ceramic heating element technology by utilizing RF induction to bring the tip
temperature to its Curie Point which is set by the composition of a special magnetic alloy. Once it hits its Curie Point, the tip will lose its magnetic properties and will idle at
its set temperature +/- 1.1°C ready for action in under 10 seconds! Once the soldering tip makes contact with the solder joint, the tip will transfer heat across at a rapid
rate and when confronted with a heavier load or lead free solders, the system instantaneously increases its power to ensure heat is retained at the tip. Curie Heat regulates
the amount of power applied to ensure no damage to sensitive components. As the tip is the heater, it responds instantly, unlike conventional soldering systems where users
have to dial the temperature right up to compensate for the drop in tip temperature. The unique cartridge style soldering tip which has a heating element built in, will
eliminate the need for replacement of front end soldering hand piece spare parts such as, heating element, tip holder nuts, sleeves and bakelite insulation materials.
Sleeper features within the work stands also help to extend tip life.

No temperature adjustment required The stand even stores your tips
- amazingly simple design is great for (sold separately) for convenient
use in schools & tertiary electronics
access when you need it.
teaching labs.

Thermaltronics® TMT-2000S-K Soldering Station Thermaltronics® TMT-9000S-2 Soldering Station Tools

Responds dynamically to the thermal demands of each solder joint, meeting the exact This professional benchtop soldering station *Requires external air supply. 6
temperature requirements of the component and board ensuring components and is designed for high end servicing require-
PCB’s are not damaged. This system is ideal for service, repair and construction of ments of the latest digital devices, medical Optional
sensitive devices including medical equipment. Tips simply slide into the handle for equipment. The LCD readout provides real T 2023
fast changeover for tips to suit different soldering applications - no fiddly screw fit- time feedback of thermal load during the desoldering
tings. No manual temperature adjustment is required, making this system ideal for soldering process. Under ten second heat gun* & stand
use in educational environments where novice users can quickly damage sensitive up time ensures the tip is ready to go after
components with ordinary soldering stations. The dual selectable outputs allow you to you remove it from the sleeper stand. This Optional
use two handles (second handle sold separately) equipped with different tips to suit minimises power usage by switching off the T 2024 adds
varying soldering applications. iron when not in use. The dual selectable SMD soldering
outputs allow you to use two handles (sec- capability.
Features • Dual switchable outputs • Curie Heat Technology • Leaded and Lead free ond handle available separately) to suit vary-
capable • Fast, under 10 second heat up • Rapid recovery • No overshoot • No ing soldering applications. Tips simply slide
Calibration required • Cartridge tip means you never have to replace a heating element ever into the handle for fast changeover to suit
again! • Silicone burn proof cable • ESD safe • Tip saver, auto sleeper work stand • Low different soldering applications - no fiddly
power idle • Light weight for transporting • Brass curls and sponge • Heatproof tip removal screw fittings. Optional handles simply plug
pad • Includes 1.5mm chisel tip into the second output on the main unit.

SPECIFICATIONS

Input Line Voltage: 220-240V ac, 52W Maximum Enclosure Temperature: 65°C Upgrades over TMT-2000S: • 13.56Mhz power supply provides faster heat up, recovery
times and overall performance • Built in LCD power meter • 4 year warranty on power
Tip to Gnd Potential: Fuse: 250V 1A supply • Tip range in excess of 60 types • Compatibility with Thermaltronics SMD tweezers
& desoldering handpieces.
<2mV, true RMS 50-500Hz Output Power (Maximum): 60 Watts

Tip to Gnd Resistance: <2 Ohms DC Output Frequency: 450KHz

Idle Temperature Stability: +/- 1.1°C Dimensions: 110W x 155H x 92Dmm

Ambient Operating Temperature: 10 to 40 °C Weight: 2.58kg Features • Dual switchable outputs • Curie Heat Technology • Leaded and Lead free
capable • Fast, under ten second heat up • Rapid recovery • No overshoot • No calibration
Price Each RRP required • Cartridge tip means you never have to replace a heating element ever again!
• Silicone burn proof cable • ESD safe • Tip saver, auto sleeper work stand • Low power
T 2000 Thermaltronics TMT-2000S-K soldering system 315.00 idle • Brass curls & sponge • Heatproof tip removal pad • Includes 1.5mm chisel tip

T 2001 Replacement hand piece for left hand side output 149.00 SPECIFICATIONS
T 2001A Additional hand piece for right hand side output new 149.00
T 2002 Additional sleeper work stand 149.00 Input Line Voltage: 220-240V ac Maximum Enclosure Temperature: 50°C
T 2003 Tip removal pad 16.50
T 2004 Replacement sponge Tip to Gnd Potential: Fuse: 250V 0.5A
T 1332 Replacement dry tip cleaner 5.95
4.95 <2mV, true RMS 50-500Hz Output Power (Maximum): 40 Watts

Tip to Gnd Resistance: <2 Ohms DC Output Frequency: 13.56MHz

Idle Temperature Stability: +/- 1.1°C Dimensions: 212W x 118H x 132Dmm

Ambient Operating Temperature: 10 to 40 °C Weight: 3.47kg

i Price Each RRP

Education & Government Accounts T 2020 Thermaltronics TMT-9000S-2 soldering system 550.00

T 2021 Additional hand piece for second output 185.00
149.00
Universities, Colleges, Secondary Schools, TAFE Colleges & T 2022 Additional sleeper work stand 525.00
T 2023 Desoldering gun & stand new 465.00
Government Departments qualify for 30 day credit accounts. T 2024 SMD tweezer rework hand piece new 16.50

For more information call 1300 797 007. T 2003 Tip removal pad 5.95
4.95
T 2004 Replacement sponge

T 1332 Replacement dry tip cleaner

Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au

164 Tools All prices shown are RRP inc. GST.

Thermaltronics Tips & Fume Extractors Micron® Fume Extractor & 40 Watt Soldering Iron

Thermaltronics® Cartridge Tips

Suits T 2000 (TMT-2000S-K)

AB C DE F G

350° to 398° Tips 420° to 475° High Temperature Tips

Model Style Description Model Style Description
0.5mm conical
T 2005 A 0.5mm conical bent T 2012 E 1.5mm chisel
1mm conical
T 2006 B 1mm chisel T 2013 F 2.5mm chisel 2 year
1.5mm chisel warranty
T 2007 C 2.5mm chisel T 2014 G 5mm chisel
5mm chisel
T 2008 D

T 2009 E

T 2010 F

T 2011 G

Price Each RRP The T 2444 is a high performance 40W soldering iron combined with a fume extrac-
T 2005 - T 2014 Cartridge tips 20.90 tor, designed to keep your work area free from fumes and smoke. The all metal con-
struction will ensure this professional station will last for years. A wide temperature
Suits T 2020 (TMT-9000S-2) range of 250° to 430°C makes it suitable for a wide range of soldering tasks. Sup-
plied with 1.6mm tip (T 2413) and iron stand.

AB C DE F G H I Features • High insulation ceramic heating element for rapid heat-up and instant recovery
• Burn proof iron lead • Heater insulation of over 100M • Zero voltage circuit ensures no
high voltage spikes or magnetic fields are present at the tip to damage sensitive components
• Temperature adjustable • Powerful ball bearing fan for maximum fume extraction
• Sturdy metal construction • Improves work place comfort • Supplied with iron stand and
sponge • ESD safe

Tools 350° to 398° Power Plus Tips 420° to 475° High Temperature Tips SPECIFICATIONS
Voltage input
Model Style Description Model Style Description Insul. resistance (@400°C) 240V ac
Heater voltage >100M
T 2025 A 0.5mm conical T 2032 E 1.5mm chisel Heater element 240V ac
Power Ceramic
T 2026 B 0.5mm conical bent T 2033 F 2.5mm chisel Stability at idle 40 Watts
Temp. range °C
T 2027 C 1mm conical T 2034 G 5mm chisel Leakage voltage ± 6°C
Tip to ground resistance: 250°C to 430°C
6 T 2028 D 1mm chisel Desolder Tips Weight
T 2029 E 1.5mm chisel Protection (Fuse) < 2mV
F 2.5mm chisel Model Style Description <0.1
T 2030 G 5mm chisel 1.1mm 1.8kg
H 0.4mm bent tweezers T 2040G I 1.35mm
T 2031 1.5mm 1A
T 2040H I
T 2045B
T 2040I I

Price Each RRP Price Each RRP 2+ 5+

T 2025 - T 2034 Cartridge tips 25.95 T 2444 40W with fume extractor 159.00 145.00 135.00
T 2040G - T 2040I Desolder tips 65.00
T 2045B Tweezer pair 59.95 T 2412 0.8 chisel tip 10.75
T 2413 1.6 chisel tip 10.75
Replacement Tips For Older Micron® Desoldering Irons T 2414 3.2 chisel tip 10.75
T 1291 Foam filter (pair) 13.60

Price Each Suits Iron Tip size (mm) Item Type RRP 4+ Micron® Professional Solder Fume Extractor

T 1276 T 1280 Tip Cleaner 2.00 1.80 Designed to remove annoying solder
T 1264 T 1260 1.0mm Nozzle Tip 26.95 24.50 fumes from the work area. Suitable for
T 1265 T 1260 1.2mm Nozzle Tip 26.95 24.50 use in production lines, service centres,
T 1266 T 1260 1.5mm Nozzle Tip 26.95 24.50 R&D workbenches or by the hobbyist. It
T 1263 T 1260 Replacement Filter Set 44.00 40.00 incorporates a ball bearing high volume
120mm fan to maximise airflow. Air flow
Replacement Tips For Older Micron® Soldering Irons is directed upwards at the rear of the
unit to aid in safe dispersion of unab-
Price Each Suits Iron Tip size (mm) Item Type RRP 5+ sorbed fumes.

T 2382 T 2380 0.4 Conical 10.75 9.70 Features • All metal construction
T 2383 T 2380 0.8 Chisel 10.75 9.70 • High volume ball bearing fan for long life
T 2384 T 2380 1.2 Chisel 10.75 9.70 • Replaceable “Active Carbon” filter • ESD
T 2386 T 2380 1.6 Chisel 10.75 9.70 safe • Keeps your work area free of fumes
T 2387 T 2380 3.2 Chisel 10.75 9.70 & smoke • 240V mains operation
T 2388 T 2380 5.0 Chisel 10.75 9.70
T 2421 T 2443/6 0.4 Chisel 12.40 11.20 SPECIFICATIONS 240V ac
T 2430 T 2443/6 0.8 Chisel 12.40 11.20 Input Power 22W
T 2431 T 2443/6 1.6 Chisel 12.40 11.20 Wattage
T 2432 T 2443/6 3.2 Chisel 12.40 11.20 Nominal Air Volume 95 CFM
T 2433 T 2438/42 0.2 Round 10.75 9.70 Protection (Fuse) 1A
T 2434 T 2438/42 0.8 Round 10.75 9.70 Dimensions
T 2435 T 2438/42 1.6 Chisel 10.75 9.70 Weight 162W X 200H X 120D mm
T 2436 T 2438/42 3.2 Chisel 10.75 9.70 1.6kg
Price Each
RRP 2+ 5+
T 1295
T 1291 Replacement foam filter (3 pcs) 99.00 89.00 79.00
13.60 12.25 10.90

www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999

All prices shown are RRP inc. GST. Tools 165

Micron® 600W SMD Hot Air Re-Work Station Handheld Irons & Desoldering

Megapower® Ultra Compact USB Soldering Iron

2 year new
warranty
Achieves an amazing max
temperature of 480°C!

Tip equipped with
in-built LED

This incredible little device will operate directly off any USB port or 9 Volt battery
using the supplied adaptor. If you're doing occasional soldering jobs, such as
replacing a battery in an iPod or fixing a dry joint in an audio cable, the T 2699 is just
the shot! A handy in-built LED aids visibility on crowded PCBs.
Check out the YouTube performance video on our website.

Price Each RRP 3+ 6+
T 2699
27.95 25.50 22.50

Provides a quick and easy way to rework boards fitted with surface mount devices, Atten® Temperature Adjustable 50W 240V Soldering Iron
even in RoHS products. It works by blowing 600 watts of heated air onto the board new
your are working on, melting the solder on the SMD pads in the process. It is fully
temperature adjustable between 100°C and 480°C. The high flow air pump blows up This quality iron is fitted with a dial adjustment in the handle SPARE IRON TIPS Tools
to 40 litres per minute and is also adjustable. It includes four nozzle sets designed to to select temperatures between 200°C and 500°C. Fitted T 2434 0.8 round
direct hot air around the chip or device being removed from the board. These suit with ceramic heater for excellent ±2°C temperature stability. T 2435 1.6 chisel
SOIC, CHIP, QFP, PLCC & BGA devices, however the nozzles can be used for a wide Comfortable rubberised grip fitted with strain relief and 3 pin T 2436 3.2 chisel
variety of SMD components. Also supplied with SMD tweezer set & IC removal tool. 240V mains lead. T 2471 1.0 mini-wave
T 2472 2.0 mini-wave
Important: Air flow rate and heater power are essential specifications on a re-work
station. The 600W heater and 40l/min blower capacity make this Micron unit a truly Price Each Tip Included RRP 4+ 10+
professional grade unit capable of every day use in commercial applications.
T 2487 50W iron 54.95 49.50 44.00
Features • Low vibration air pump • Suits leaded & lead free solder (RoHS) • Quality T 2433-T 2436 Standard tips 10.75
nichrome heating element • Sturdy all metal housing • Rapid heat up • Long service life T 2471-T 2473 Mini-wave tips 23.95 6
• Includes 4 nozzles, SMD tweezer set, chip removal tool & spare heating element • Individual
temperature & air flow adjustments • Auto fan cooling extends tip life • ESD safe • Energy au- Micron® Economy 240V Soldering Irons
thority approved • Burn proof lead • Temperature lockout
Supplied with bench stand
SPECIFICATIONS 240V ac Air flow capacity: 1.5L/min - 40L/min
Voltage input: 600W Protection: Fast blow 5A M205 fuse
Wattage: Weight:
Heating element: Nichrome Dimensions: 4.9kg
Temperature range: 100-480°C 283W x 190D x 120Hmm

Price Each RRP 2+ Economy soldering irons to fit just about any budget. SPARE IRON TIPS
T 1285 Great backup soldering iron. T 2406 Conical suit T 2401/5
T 1286 Spare attachments (4pk) 379.00 349.00 T 2407 Chisel suit T 2401/5
89.95 85.95 T 2410 Conical suit T 2409
T 2411 Chisel suit T 2409
Features • Iron clad chrome plated tip • 240V operation
• Supplied with a conical tip • Perfect for occasional jobs
• Rubber handle grip

Solder Sucker Price Each Tip Included RRP 3+ 6+
T 2401 25W iron T 2406
T 2407 14.95 13.35 11.95
T 2405 40W iron T 2411 14.40
17.95 16.20 16.95
T 2409 60W iron
T 2401 & T 2405 Tips 19.95 17.95
T 2409 Tips 3.95 3.15
4.50 4.00

A handy addition to any toolbox or workbench, this high suction ‘solder sucker’ Micron® 20 Watt 240V Soldering Iron
quickly removes solder from PCBs. Self cleaning plunger with teflon tip.

Price Each RRP 3+ 6+

T 1242 Solder sucker 11.25 9.95 8.95
T 1243 Replacement tip 3.25 2.95 2.75

Anti-Static Solder Sucker Supplied with bench stand

Ideal handyman soldering iron for auto wiring, constructing projects etc. Fixed 370°C
temperature is well suited to general electronic repairs using leaded solder. A long life
1.6mm tip is included, plus a mini bench stand ensuring safe operation in your work
area. Fitted with burn proof rubber lead.

A high suction ‘solder sucker’ for quickly removing solder from PCBs. The anti-static Features • 370°C fixed temperature • High efficiency SPARE IRON TIPS
teflon tip prevents static damage to components. Self cleaning plunger. patented heating element • Iron clad, chrome plated, long life T 2423 0.8 micro chisel
interchangeable tips • Tip life expectancy is many times that of T 2424 1.6 mini conical
conventional plated tips • Supplied with T 2424 1.6mm conical T 2464 3.2 chisel
tip • 3 tip sizes available

Price Each RRP 3+ 6+ Price Each RRP 4+ 10+
T 2420 Iron
T 1246 Solder sucker 16.50 14.85 13.25 All Spare Tips 21.95 19.80 17.60
T 1247 Replacement tip 3.95 3.50 3.20 7.90 7.10

Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au

166 Tools All prices shown are RRP inc. GST.

Soldering Accessories Soldering Iron Stand

Chemtools® Solder Paste Resin Core Lead Free Solder

Solder paste for use in PCB assembly, prototyping & Lead free. Complies with Euro- ROHS
reflow soldering. 12-14 hour tack line. Clear pin-probe pean RoHS. 99.3% tin, 0.7%
testable residue. Wide process window. Meets Bell- copper. Melting point 227°C.
core and IPC requirements. 10cc syringe. We recommend this solder for
Australian made. use with our lead free soldering
stations. Available in 250g or
1kg rolls.

Price Each RRP 4+ 10+ Price Each RRP 4+ 10+ Heavy duty cast iron base with sturdy spring stand. A
safe way to stow your iron on your workbench,
H 1640 Leaded 11.95 11.35 10.35 T 1075 0.5mm 250g roll 24.50 22.00 19.60 reducing the chance of accidental burns. Suits most
H 1645 Lead Free 15.95 15.10 13.85 T 1078 0.8mm 250g roll 22.95 20.65 18.35 handheld soldering irons. Supplied with tip cleaning
T 1079 0.8mm 1kg roll 84.00 79.00 70.00 sponge.
T 1080 1mm 250g roll 22.95 20.65 18.35
T 1081 1mm 1kg roll 84.00 79.00 70.00
T 1084 1.5mm 250g roll 22.95 20.65 18.35

Chemtools® SMD Flux Gel Chemtools® Tip Tinners Price Each RRP 4+ 10+

T 1310A 16.00 14.50 13.00
T 1320 Spare sponge 2.65 2.35 2.10

PCB Stands

This flux gel is halogen-free ensuring long-term Keep your soldering iron tip clean and freshly tinned!
reliability and ease of soldering. Suitable for both Ideal for servicing and production use. An general
normal and lead-free reflow soldering processes purpose model (T 1326) is suitable for ongoing use to
during which the flux medium volatises leaving prevent any flux build up and oxidisation. The high
minimal residue. 10cc syringe. Australian made. strength model (T 1328) is used when soldering tip
plating has oxidised and the whole tip has turned
Price Each RRP 4+ 10+ black, making the tip unusable. The T 1328 will help
H 1650A 12.95 11.35 10.50 bring your tip back to life!

Tools Chemtools® Desoldering Braid

6 Solder Wick - Made Price Each RRP 4+ 10+ Complete with dual clamps to hold PCBs, wire etc in
in USA. Apply wick to place. T 1460 features a magnifying glass to assist in
T 1326 General Purpose 12.50 11.65 10.50 component identification and PCB inspection. Clips
the joint & heat with T 1328 High Strength 12.50 11.65 10.50 move 360° allowing great flexibility for holding differ-
ent items including PCBs, connectors, cable ends etc.
a soldering iron, cap-

illary action then

draws the solder off. Soldering Iron Tip Cleaner

Price Each RRP 4+ 10+ Price Each RRP 4+ 10+

1.5m rolls 5.25 4.70 4.20 T 1450 9.95 8.50 7.50
5.25 4.70 4.20 T 1460 With magnifier 12.95 11.50 10.85
T 1210A 0.64mm White 5.25 4.70 4.20
T 1212A 1.27mm Yellow 5.90 5.30 4.70 Iroda® Butane Gas Refill
T 1214A 1.9mm Green 6.25 5.60 5.00
T 1216A 2.54mm Blue Easy to use dry soldering iron tip cleaner. Keeps tip
T 1218A 3.18mm Brown 18.95 17.95 16.90 clean and tidy without mess. Includes in built iron
18.95 17.95 16.90 stand. Suits RoHS soldering.
7.6m rolls 19.50 18.50 17.40
22.95 21.75 20.50 Price Each RRP 4+ 10+
T 1211 0.64mm White 23.25 22.15 20.80
T 1213 1.27mm Yellow T 1330 10.30 9.50 8.95
T 1215 1.9mm Green T 1332 Spare cleaner 4.95 4.50 4.20
T 1217 2.54mm Blue
T 1219 3.18mm Brown

Resin Core Solder Solder Roll Holders

Now available in 1.6mm T 2475 T 2451
diameter. All resin core.
60% tin, 40% lead. We T 1300 T 2451 Aerosol can of high quality butane suitable for
recommend this solder for gas powered soldering irons. 250ml net.
use with soldering irons T 2475 Refillable cartridge suitable for the T 2480
using iron clad, chrome blow torch & T 2490 heat gun. Holds 7.5ml and may
plated tips. Available in 200g be refilled using T 2451 gas.
or 1kg rolls, or a handy 3m
tube for use in the field. IMPORTANT NOTE ON BUTANE GAS
We recommend the use of high quality Iroda® butane gas
Price Each RRP 4+ 10+ T 1306
for use in all Iroda® gas powered products. Inferior or
T 1090 0.5mm 200g roll 12.95 12.50 11.95 Keep your solder within easy reach! Accepts up to lower grade butane may contain a higher level of
T 1100 0.8mm 200g roll 12.95 12.50 11.95 1kg rolls of solder. Can be mounted on a wall or
T 1105 0.8mm 1kg roll 54.95 49.50 43.95 bench. T 1306 includes iron stand and soldering impurities which will block the internal microscopic filters
T 1110 1mm 200g roll 12.95 12.50 11.95 sponge. Solder not included. faster causing intermittent or complete failure. Must
T 1115 1mm 1kg roll 54.95 49.50 43.95
T 1122 1.6mm 200g roll 12.95 12.50 11.95 travel by road, regulations prohibit transport by air freight.
T 1123 1.6mm 1kg roll 54.95 49.50 43.95
T 1120 1mm Tube ≈3m 1.85 1.65 1.45 Price Each RRP 4+ 10+ Price Each RRP 4+ 12+

T 1300 13.95 12.50 11.50 T 2475 Refillable cartridge 5.95 5.50 4.95
T 1306 Iron stand & sponge 24.95 22.95 19.00 T 2451 250ml aerosol 7.50 6.90 6.35

www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999

All prices shown are RRP inc. GST. Tools 167

Iroda® 70W Gas Soldering Iron Iroda Gas Tools

T 2595 Iron Iroda® 125W Gas Cartridge Soldering Iron

T 2630 Iron

T 2596 Kit

This compact pocket-size Iroda® Soldering Iron offers go-anywhere soldering conven- All the heat of our popular T 2600
ience, with an equivalent heat capacity of up to 70 Watts. It features an adjustable iron with the addition of Iroda®’s
heat control, cap mounted flint igniter, long life catalyst tip and a 7ml gas reservoir latest cartridge powered design.
for up to 30 minutes use. Adjustable tip temperature from 210 to 400°C. Includes
1mm round tip (T 2505).

The T 2596 kit comprises the T 2595 Gas Iron supplied in a handy carry case with T 2631 Kit
a range of tips and accessories including safety stand, cleaning sponge, solder dis-
penser, blow torch, hot air blower and hot knife cutter. The T 2630 is a professional grade soldering iron/blowtorch and multi-function heat
tool with single click piezo ignition. Powered by a removable/refillable Liquid Energy
Price Each RRP 4+ 10+ Cell (L.E.C.) 20ml gas reservoir for up to 2 hours use. The T 2630 boasts an equiva-
T 2595 Iron only lent power range of 30 to 125 Watts as an iron, and as a blowtorch produces a
T 2596 Kit 39.95 36.00 32.00 1300ºC flame. It features an inbuilt safety stand ensuring you can work with minimal
59.95 54.00 48.00 risk anywhere, anytime. Supplied with one L.E.C butane cartridge and a 1.6mm coni-
cal tip (T 2602).
Iroda® 80W Gas Soldering Iron
The T 2631 kit comprises of the T 2630 Gas Iron, replacement gas filter, solder reel
T 2590 Iron (17gm), sponge, heat deflector, heat blower, 3.2mm chisel tip and 2 x LEC 20ml car-
tridges. All supplied in a handy carry case.

Price Each RRP 4+ 10+ Tools
T 2630 Iron only
119.00 107.00 95.00 6
T 2631 Kit
T 2619 Spare gas filter to suit 159.00 144.00 129.00
T 2632 Spare refillable cartridge to suit 19.95 19.50 19.00
20.95 19.95 16.95

T 2592 Kit

This advanced Iroda® Soldering Iron offers go-anywhere soldering convenience, with Iroda® Professional 125W Gas Soldering Iron
an equivalent heat capacity of up to 80 Watts. It features an adjustable heat control,
cap mounted flint igniter, long life catalyst tip and a 20ml gas reservoir for up to 2 T 2600 Iron
hours use. Adjustable from 210 to 450°C. Includes 1.6mm round tip (T 2505).

The T 2592 kit comprises the T 2590 Gas Iron supplied in a handy carry case with
a range of tips and accessories including safety stand, cleaning sponge, solder
dispenser, blow torch, hot air blower and hot knife cutter.

Price Each RRP 4+ 10+
T 2590 Iron only
T 2592 Kit 46.95 42.00 38.00
69.95 63.00 56.00

Iroda® 100W Gas Soldering Iron

T 2598 Iron

T 2599 Kit T 2601 Kit

Perfect handyman’s soldering iron for those occasional jobs. 20ml gas reservoir for The T 2600 eliminates the need for extension leads every time you want to solder
up to 2 hours use. Built-in piezo igniter for easy one-hand operation. Adjustable tem- something away from your work bench. It has a 125W heating capacity, a “one-
perature 250 to 500°C. Includes 1.6mm conical tip (T 2602). The T 2599 kit com- touch” piezo ignition for super-easy starting and a thumb-wheel heat control. The
prises the T 2598 Gas Iron supplied in a handy carry case with a range of tips and 38ml gas chamber can provide up to 4 hours operation, and is refilled using a stan-
accessories including safety stand, cleaning sponge, solder dispenser, blow torch, hot dard butane gas refill canister. An absolute MUST for installers, mobile techs, on-site
air blower, hot knife cutter and spare gas filter. service personnel, etc. Adjustable temperature from 250 to 550°C. Includes 1.6mm
conical tip (T 2602).

The T 2601 gas iron kit comprises the T 2600 gas soldering iron supplied in a
handy carry case with a range of tips and accessories including safety stand, clean-
ing sponge, solder dispenser, blow torch, hot air blower and hot knife cutter.

“This has all the convenience features of a normal gas iron, such as quick
heating, no power cords, light weight and best of all, it comes with a blow
torch tip.” - Silicon Chip Magazine

Price Each RRP 4+ 10+ Price Each RRP 4+ 10+
T 2598 Iron only T 2600 Iron only
79.00 72.00 64.00 99.00 87.50 79.00
T 2599 Kit 109.00 99.00 93.00 T 2601 Kit 139.00 124.00 110.00
T 2619 Spare gas filter to suit 19.50 19.00 T 2619 Spare gas filter to suit
19.95 19.95 19.50 19.00

Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au

168 Tools All prices shown are RRP inc. GST.

Iroda Gas Tools

Iroda® Professional 185W Gas Soldering Gun Iroda® Keyring Pocket Blowtorch

Converts to a blow torch Powerful 1300°C output from a
with tip removed tiny keyring size blowtorch. Ideal for
service people and those quick jobs
T 2651 on the go. Fully adjustable flame RRP 3+ 6+
Kit output makes it suitable for a wide
variety of jobs. 18.95 16.95 14.95

T 2650 Iron Price Each
T 2488

Gas Iron Replacement Tips

Suits T 2590, T 2592, T 2595, T 2596

No more extension lead tangles! The ultimate tool for technicians, electricians, AB CDE F GH I J K L M
auto electricians etc. Rated at a huge 185W it's capable of temperatures of up to
550°C, to handle the biggest jobs effortlessly. That's not all, by simply removing the Note: Tips are supplied with catalytic converter where required.
tip the Solderpro 180 instantly turns into a 1300°C blow torch for brazing and heat
shrinking. Incredibly easy to use with simple one click piezo ignition and thumbwheel Cat No. Style Description Cat No. Style Description
gas adjustment. Powered by a unique refillable cartridge capable of 1.5 hours use on T 2505 A 1mm round T 2512 H 3mm conical
mid setting. No need to carry a can of gas when you go on the job anymore, just put T 2506 B 2mm round T 2513 I Blow torch
a spare cartridge in your toolbox! Includes two cartridges & 7mm chisel tip (T 2656). T 2507 C 3mm round T 2514 J Air blower
T 2508 D 2mm chisel T 2515 K Hot knife
Features • Easy start and reliable piezo ignition • Gas and air flame adjustments • Up to T 2509 E 3mm chisel T 2518 L Blower+Def.
550°C soldering tip temperature • Self standing • Unique refillable butane cartridge system T 2510 F 4mm chisel T 2519 M Deflector
• Easy gas flow adjustment • Supplied with 7mm chisel tip and blow torch attachment. T 2511 G 2mm conical

Tools Kit Includes • T 2650 gas gun • Deflector tip • Blower tip • 1.8mm conical tip Price Each RRP 4+ 10+
• Spare gas filter • Stainless steel cleaning brush • Solder sucker • Wire cutters
• Flux paste • Cleaning sponge • 2 refillable gas cartridges • Solder dispenser ALL TIPS ‘A’ to ‘K’ 10.45 9.40 8.35
T 2518 Blower + deflector attachment ‘L’ 14.95 13.95 12.50
Price Each RRP 2+ 5+ T 2519 Deflector attachment ‘M’ 3.95 3.65 3.20

6 T 2650 Iron 149.00 135.00 125.00 Suits T 2598, T 2599, T 2600, T 2601, T 2630, T 2631
T 2651 Kit 155.00 140.00
T 2652 Spare cartridges (2 pack) 169.00
T 2653 Replacement gas filter 20.95
23.95

Iroda® Maxi “Pro-Torch” Head

Cat. No. Style Description Cat. No. Style Description
T 2602 A 1.6 mm conical T 2612 E 3.2 mm chisel
T 2604 B Air blower T 2614 F 2.4 mm angle
T 2606 C 3.2 mm conical T 2616 G 3.2 mm angle
T 2610 D 2.4 mm chisel T 2617 H Hot Knife

Price Each RRP 4+ 10+
ALL TIPS ‘A’ to ‘H’ 18.85 16.95 15.10

Suits T 2650 & T 2651

Gas canister sold Cat. No. Style Description
separately T 2654 A 1.8mm conical
(fitted for illustration
T 2655 B 4mm angle
purposes only).
T 2656 C 7mm chisel
T 2455 Pk of 4 gas canisters to suit AB CD E
T 2658 D Heat blower

T 2659 E Deflector

T 2660 F Hot knife
F

The Maxi “Pro-Torch” is the highest output blow torch available in the Altronics range. Price Each RRP 4+ 10+
It utilises high capacity 220g butane canisters to provide a powerful wind resistant
flame. An adjustable regulator provides the flexibility to choose a gentle orange flame ALL TIPS ‘A, B, C, D, F’ 23.95 21.95 18.95
or 1350°C blue jet. Ideal for brazing, soldering, plumbing, industrial maintenance, T 2659 Deflector attachment ‘E’ 3.95 3.50 2.95
heatshrinking & model making. A click of the “one-touch” piezo ignition provides
quick startup every time. T 2455 Gasmate® 4 pack of gas to suit. Gas Iron Replacement Filters
Note: these gas canisters are not compatible with any other Iroda® gas product.
These replacement filters will add extra life to your Iroda® soldering
Features • One-click piezo ignition • Rotary gas volume adjustment • Wind resistant flame irons. They filter out gas impurities ensuring gas jets do not suffer
• Hand protection plate • Utilises standard butane canisters with mounting plate • Robust blockages.
construction for every day professional use.
T 2619: Suits T 2598, T 2599, T 2600, T 2601, T 2630, T 2631.
T 2653: Suits T 2650, T 2651.

Price Each RRP 2+ 5+ Price Each RRP 4+ 10+
T 2497 Gas torch head
T 2455 Pk 4 butane gas canisters 49.95 46.00 43.00 T 2619 19.95 19.50 19.00
8.95 T 2653 23.95 22.95 21.95

www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999

All prices shown are RRP inc. GST. Tools 169

Iroda Gas Tools

Iroda® Flameless Heat Gun RRP 4+ 10+ 60W Hot Melt Glue Gun RRP 4+ 10+

Designed to provide flameless heating, not a direct 34.95 31.50 27.95 This fantastic hot melt glue gun is suited to 17.95 15.95 14.35
flame, for reducing heatshrink insulation without 5.95 5.50 a wide variety of craft or hobby needs. Easy 3.50 3.15 2.90
burning it. Once started, the tip generates instant to operate, simply put the glue stick into the 17.95 16.95 15.95
heat regulated at the correct temperature for gun, switch on and let it heat up for 5
reducing heatshrink tubing (650°C). Powered by a minutes. It is then ready to glue wood,
refillable gas cartridge and with trigger-actuated plastics, paper, ceramics, cardboard, cloth
piezo electric starter, it makes heatshrinking a etc. Featuring a specialised non-drip nozzle,
breeze! A full cartridge will provide 20 minutes flow trigger and bench stand, 240V
operation. operation. Glue sticks 12mmØ.

Features • Waterproof piezo electronic ignition system Price Each
with safety lock • Powered by refillable gas cartridge • Al- T 2940
lows up to 20 minutes of continuous use • 650°C tem- T 2942 Glue sticks 100mm 6 pcs
perature T 2943 Glue sticks 300mm 33 pcs

Price Each Cable Tacker/Stapler
T 2480
T 2475 Spare refillable cartridge Allows you to secure cable runs in roof and
wall cavities. Staples are suitable for use in
Iroda® “Micro Jet” Pocket Blow Torches soft wood eg: pine or MDF. Includes 50 of
each staple size. Staples incorporate plastic
Powered by a refillable cartridge, these collar to protect cable from damage.
blow torches burn at 1300°C. Ideal for Small staples: suit 4-6mmØ round cable or
brazing, heavy duty soldering, hobbies, 2.5-4mm flat wire.
model construction etc. Piezo electronic Max width 8mm.
ignition ensures easy lighting every Large staples: suit 6-8mmØ round cable or
time. Ideal for your tool box or work 4.5-6.3mm flat wire. Max width 10.3mm.
bench. Long nozzle model is ideal for
directing heat into awkward places. Price Each
T 2357 Cable tacker
Features • Piezo electronic ignition system T 2358 Pk 200 small staples RRP 3+ 6+ Tools
with safety lock • Powered by refillable gas T 2359 Pk 200 large staples
cartridge • Allows up to 20 minutes of 19.95 17.70 15.70 6
continuous use • 1300°C flame temperature Heavy Duty Cable Tacker/Stapler 9.95 8.75 7.75
• Wind-proof flame • Waterproof ignition 9.95 8.75 7.75
Professional all metal construction -
Price Each RRP 4+ 10+ designed for the rigours of every day use.
T 2490 Allows you to secure cable runs in roof and
T 2491 110mm Long Nozzle 20.00 18.50 17.50 wall cavities. Staples are suitable for use in
T 2475 Spare refillable cartridge 26.95 24.50 21.75 soft wood eg: pine or MDF. Includes 50 of
each staple size. Staples incorporate plastic
Iroda® High Output Pro-Torches 5.95 5.50 collar to protect cable from damage.
Includes carry case.
These Iroda® high output T 2361: Suits 8-9mmØ round cable or T 2361 T 2362-3
pro-torches are superb qual- 4-7mm wide flat cable.
ity, professional hand held or T 2362: Suits 9.5-11mmØ round cable. RRP 3+ 6+
free standing butane blow- T 2363: Suits 11.5-12.5mmØ round cable.
torches. They are ideal for 49.95 44.90 39.90
brazing, heatshrinking, Price Each
model making, silver solder- T 2360 Cable tacker 9.95 8.75 7.75
ing and more. They feature T 2361 Pk 200 flat/round cable staples (sml) 9.95 8.75 7.75
both gas feed and air volume T 2362 Pk 200 round cable staples (med) 9.95 8.75 7.75
adjustments, providing the T 2363 Pk 200 round cable staples (lrg)
flexibility to adjust the type of
flame to exactly match the Rack-A-Tiers® Cable Reeler System
task at hand, from a gentle
flame to a high 1350°C* jet. A lightweight, yet incredibly strong
T 2494 features all alu- portable cable reeling system,
minium construction. *T 2492 designed with installers in mind. The
max temperature 1300°C. two sides have carry handle
recesses and can be clipped
Features • Easy start and reliable piezo ignition • Torch stays lit after initial ignition • Gas together for easy transport. The Cable for illustration
and air flame adjustments • Up to 1350°C flame temperature • Huge refillable gas chamber included pipe supports cable reels purposes.
• Gas chamber and feed system all metal construction • Ceramic flame guard • Wind-proof up to 150kg. Maximum diameter of
jet flame • Water proof ignition system • Safety ignition lock to prevent accidental lighting cable reels 800mm. The unique RRP 2+
• T 2494 60ml tank lasts 2 hrs at mid setting • T 2492 20ml tank lasts 1 hr at mid setting. design can also be used as a
makeshift saw horse, a pipe vice, 199.00 189.00
Price Each RRP 2+ 5+ even a seat! Constructed from
T 2492 Small recycled plastics.
T 2494 Large 39.95 36.00 32.00
79.00 70.00 63.00 Price Each
T 4700

Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au

170 Tools All prices shown are RRP inc. GST.

Cable Installation Cable Push / Pull Rods (10 x 1m)

Portable Cable Reeler Stand new Now available in a kit including ten rods & 5 brass accessory tips.
Supplied in ten 1m lengths, these flexible rods may be screwed together to form a
A light weight and easy to carry Cable for illustration single 10m length. Typically used when running cable across suspended tile ceilings.
accessory for the installer on the purposes. Allows you to push or pull cables without getting into the ceiling/crawl space. Fitted
move! This steel frame cable RRP 2+ 4+ with brass loop one end for connection to cable. Constructed from hard wearing
reeler stores cable reels up to 65.00 60.00 55.00 fibreglass material. Supplied in a tube for easy transport.
400Ø x 430Wmm and folds up Includes: 10 x 1m Rods, 1 x Keyring End, 1 x ‘U’ Hook, 1 x Flexible Loop.
instantly when picked up to move
quickly to a different location. It’s Price Each RRP 3+ 6+
backward leaning design means T 4648
that the weight of the cable reel 84.95 76.50 68.00
keeps it stable when pulling cable
through conduits and ceiling
spaces. Maximum cable reel
weight 25kg.

Price Each Fishing Tape / Conduit Pull Through
T 4704

‘Glow In The Dark’ Cable Running Wall ‘Snake’ Takes the hard work out of T 4603
running cable through conduit.
A rectangular shaped hard wearing plastic Features a durable plastic
coil for running short cable runs down wall container with tensioner.
cavities. Simply tape your cable to one end Available in spring steel or
and feed it through the wall cavity. It even fibreglass coil. Very easy to
glows in the dark! Ideal for running cable use, just thread the spring
around tight corners in conduit or cavities. steel through the conduit,
attach the cable to the hook,
Price Each RRP 3+ 4+ pull it back and you’re done! T 4608
T 4636 4m
32.50 31.25 29.65 Price Each RRP 3+ 6+
T 4603 Fibreglass 30m
Tools Polyester Coated Cable Running ‘Snake’ T 4608 Spring steel 15m 79.95 72.00 64.00
T 4610 Spring steel 30m 23.95 21.50 19.50
An innovative lightweight device designed to T 4612 Spring steel 60m 36.95 34.50 32.00
69.95 63.00 56.00
6 make running cables in conduits, above false
ceilings, inside walls and under floors an

absolute breeze! The 6mm flexible polyester Wi-Fi Handheld Inspection Camera

coated coil does not kink, even in tight corners

and is quickly retractable when required.

Supplied coiled in a convenient dispenser with new

brass ring ends for cable connection.

Price Each RRP 3+ 6+ Transmits video to
T 4632A 30m your smartphone
99.95 89.95 79.95 or tablet.

Professional Fibreglass Cable Running Wall ‘Snake’ The ultimate accessory for plumbers, electricians, mechanics and more! Fitted with a
1m flexible gooseneck camera which is just 9mm in diameter. It transmits video
A rectangular shaped hard wearing signal over Wi-Fi to your iOS or Android device with in-app recording and snapshot
fibreglass coil for running short cable runs photo functions. A 3x zoom function is available to see added detail when you need it.
down wall cavities. The rectangular shape Includes hook, mirror and magnet attachments. Lens is fitted with an LED light to
allows it to bend up to 180 degrees in just a help illuminate dark areas. Camera & gooseneck is weatherproof rated to IP67.
75mm radius. Ideal for running cable Requires 4xAA batteries. Phone for illustration purposes.
around tight corners in conduit or cavities.
Supplied in a convenient dispenser with Price Each RRP 2+ 4+
brass tips for connecting to cable. S 8746
149.00 135.00 120.00

Price Each RRP Handheld Inspection Camera With LCD Monitor
T 4625 4.5m
66.00 A must have for installers, mechanics,
Telescopic Cable Grab Pole electricians and plumbers! The 1m
flexible gooseneck is fitted with a 9mm
For use in long spans and in hard to reach areas in ceilings, under miniature camera with LED lighting new
floors and crawl spaces. Ideal for use when running cable across allowing close up inspection in difficult
suspended ceilings. Extends from 0.6m out to 4.8m and is fitted to access locations ie: wall cavities,
with a unique flexible hook end which is suitable for gripping the ceiling spaces, pipework, industrial
outer cable sheath securely. Constructed from lightweight non machinery, engines etc. Includes robust
conductive fibreglass material. Overall weight is just 2kgs! ABS carry case and three camera
attachments (mirror, hook & magnet).
Price Each 2.4” colour screen. Requires 4 x AA
T 4640 0.6 to 4.8m batteries.

RRP Price Each RRP 2+ 4+
S 8742A
105.00 119.00 106.95 100.95

www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999

All prices shown are RRP inc. GST. Tools 171

Holesaws & Ultrasonic Cleaners

Holesaws 170W Digital Display Ultrasonic Cleaner With Heater

High speed steel holesaw cuts a precise new
neat hole into 13mm plasterboard, ply-
wood, acrylic sheet (not recommended
for cutting metal). Suitable for power
drills with a standard 3/8" chuck.
T 2312A: Cuts hole for One-Shot®
100mm speaker & grill combinations.
T 2368: Cuts hole to correct size for
most downlight fittings.

Price Each RRP 2+ 4+ This 170W ultrasonic cleaner utilises a powerful 47,000Hz frequency wave to blast
T 2312A 140mm holesaw including arbor dirt, grease and grime from even the tiniest of objects. The 2.5 litre tank is large
89.00 84.00 74.00 enough for objects such as spectacles, tools, car parts, dentures, combs, tooth-
T 2368 92mm holesaw including arbor brushes, printer heads, precious stones & metals. An inbuilt heater keeps the bath at
T 2313A Spare cutter for T 2312A 39.95 36.00 32.00 a temperature of 65°C, helping to shift more grime from surfaces. Ideally suited for
T 2369 Spare cutter for T 2368 55.00 50.00 47.50 professional high use environments such as laboratories, optical outlets, jewellers etc.
27.95 25.20 22.40 Tank size: 264 x 164 x 80 mm. Overall size: 290L x 230W x 180D mm. Not de-
signed for continuous operation. See page 183 for ultrasonic cleaning fluid.
Adjustable Hole Saw 40mm - 270mm

Featuring an adjustable cutting tool RRP 2+ 4+

and impact-resistant transparent Price Each 149.00 135.00 120.00
X 0111
cowling & very simple to operate.

The spring loaded cutting arm

ensures the cowling remains in 70W Digital Display Ultrasonic Cleaner

place for added safety, plus it

catches all the mess! Cutting depth

up to 25mm by a single cut or

alternatively 50mm is possible by

drilling both sides. Perfect for cutting

holes in plasterboard, plywood, Tools

acrylic sheet, etc. (Not suitable for

metal). Suits both battery and

electric drills with a standard 3/8” Features twin cutting blades for a perfect cut!
(10mm) chuck.
6
RRP 2+ 4+
Price Each Perfect for optometrists, jewellers, lab technicians, watch servicing etc. This high
T 2314 Adjustable holesaw 40mm - 270mm 175.00 155.00 140.00 power model is great for the toughest of fine cleaning jobs. It produces millions of mi-
T 2315 Spare cutting blade pair only 22.95 21.70 19.30 croscopic cleansing bubbles which blow dirt, grease and grime off surfaces and pen-
etrate deep into cracks and holes. Simply fill with water (a little household detergent
Hole Saw Dust Catcher/Cowling helps), immerse the objects to be cleaned and press the start button. It features a
137 x 170 x 58mm stainless steel tank with a capacity of 1400ml. An LCD readout
Protect your eyes and face from falling dust provides quick selection of cleaning times between 90 seconds and 8 minutes. Not
and debris when cutting speaker holes in designed for continuous operation. See page 183 for ultrasonic cleaning fluid.
the ceiling. Ideal for use with our T 2312A
holesaw, but may be used with any Price Each RRP 2+ 4+
holesaw up to 177mm diameter. It is X 0109
simply fitted between the holesaw and the 134.50 121.50 109.00
drill chuck. Made from a flexible hard
wearing plastic, the bowl flexes inwards as 50W Deluxe Digital Display Ultrasonic Cleaner
you push up to drill your hole. Once drilling
is complete, it pops back out to its original Includes tank basket and attach-
shape. Bowl does not spin with the ments for cleaning CDs, watches
holesaw, protecting the ceiling surface.
and other small items.
Price Each
T 2338 RRP 2+ 4+

54.95 49.50 44.00

‘Top Catch’ Long Reach Dust Catcher For Hole Saws

Handy extension bar and holesaw cowling Australian Gently cleans CDs, DVDs, switches, relays, jewellery, glasses, watches, fuel injectors
adds 500mm to your drill chuck, allowing you Made and other very fine parts. This ultrasonic cleaner uses a transducer generator to pro-
to cut ceiling holes without getting up a ladder. duce millions of microscopic cleansing bubbles which blow dirt, grease and grime off
The cowling collects all the dust and debris, surfaces and penetrate deep into cracks and holes. This personal ultrasonic cleaner
saving you clean up time. 180mmØ cowling won’t scratch precious jewellery or glass. Simply fill with water (a little household de-
suits the T 2312A 140mm holesaw. Simply tergent helps), immerse the objects to be cleaned and press the start button. The
tighten the drill chuck onto the centre bar, unit features a 125 x 148 x 45mm stainless steel tank with a capacity of 600ml. 1.5
then fit and tighten the holesaw inside the to 8 minute digital timer. Not designed for continuous operation. See page 183 for
clear cowling. The spring loaded cowling de- ultrasonic cleaning fluid.
presses as you drill into the ceiling material.
Bowl does not spin with the holesaw, protect-
ing the ceiling surface. Australian designed &
made. Maximum holesaw size 144mm.

Price Each RRP 2+ 4+ Price Each RRP 2+ 4+
T 2308 X 0103
69.95 63.00 56.50 84.95 76.50 67.95

Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au

172 Tools All prices shown are RRP inc. GST.

Pliers & Cutters Stainless Steel Long Nose Pliers

Side Cutters Tungsten Carbide Side Cutters
new new

With sharp bevelled edge and rounded jaw profile. Possibly the last set of side cutters you’ll ever Rust resistant. Quality polished stainless steel finish
Spring return handles. Length 125mm. need to buy! Made from incredibly tough Tungsten & spring loaded action. Length 125mm.
Carbide steel which provides 5 times the life of stan-
Price Each RRP 4+ 10+ dard side cutters. HRC 72° hardness. Spring loaded. Price Each RRP 4+ 10+
T 2750A 12.95 11.20 10.40 Length 130mm. T 2741 15.95 14.25 13.50

Precision Side Cutters Price Each RRP 4+ 10+ Locking Pliers
T 2749 49.95 44.95 39.95

6” Insulated Side Cutters (1000V)

115mm (4.5”) side cutter, with rubberised insulated Adjustable locking plier grips made from drop forged
grips & sharp bevelled edge. steel. 7” (180mm) size with serrated bull nose jaws.

Price Each RRP 4+ 10+ 150mm heavy duty side cutters. Made from drop Price Each RRP 4+ 10+
T 2745A 28.25 26.00 23.50 forged steel , with rubber insulated grips. T 2270 18.95 17.75 16.50

Price Each RRP 4+ 10+ Long Nose Locking Pliers
T 2865 15.95 14.50 12.95

Stainless Steel Side Cutters Long Nose Pliers

new

Tools Adjustable locking plier grips made from drop forged
steel. 9” (228mm) size with serrated long nose jaws.

Rust resistant. Quality polished stainless steel finish. High quality, heavy duty construction. Serrated jaws. Price Each RRP 4+ 10+
Incorporates cutters. Length 160mm. T 2272 19.95 18.95 17.50
6 Spring loaded action. Length 125mm.
Price Each RRP 4+ 10+
Price Each RRP 4+ 10+ T 2815 11.30 10.15 9.05 8” Heavy Duty Insulated Pliers (1000V)

T 2754 15.95 14.80 13.85

Micro Side Cutters Long Nose Pliers
new

Comfortable grip handles. Length 130mm. For working in confined and awkward spaces. Smooth 200mm combination bull nose plier, cutter with ser-
jaws. Length 145mm. rated jaws. Made from drop forged steel, with rubber
insulated handles. 1000V rated.

Price Each RRP 4+ 10+ Price Each RRP 4+ 10+ Price Each RRP 4+ 10+
T 2825 11.50 9.80 8.65 T 2860 21.50 20.20 19.20
T 2760A Straight jaws 12.95 11.70 10.40
Heavy Duty Side Cutters T 2780A Curved jaws 13.50 12.00 10.50 6” Insulated Long Nose Pliers (1000V)

Flat Long Nose Pliers
new

High quality steel for extended durability. Long lasting For bending component legs, IC pins etc. Smooth 150mm combination long nose plier/ cutter with ser-
and comfortable grips. Length 160mm. jaws. Length 145mm. rated jaws. Made from high quality drop forged steel
with rubber insulated handles. Ideal for electricians,
Price Each RRP 4+ 10+ service persons etc. 1000V rated.
T 2830 16.75 15.10 13.40
Price Each RRP 4+ 10+ Price Each RRP 4+ 10+
T 2770A 12.95 11.70 10.40 T 2870 15.95 14.50 13.25

Carbon Steel Side Cutters

Pro Precision Long Nose Pliers 8" Bull Nose Pliers

Tough carbon steel blades stay sharp for longer. 5.5” (140mm) combination pliers/ cutters with rub- High quality, heavy duty construction. Serrated jaws
127mm (5”) side cutters made from super hard car- ber grips and serrated jaws for PCB work, handling with cutters. Length 210mm.
bon steel. Ideal for cutting solid core wires or even components etc.
small diameter steel wire.

Price Each RRP 4+ 10+ Price Each RRP 4+ 10+ Price Each RRP 4+ 10+
T 2748 19.95 17.95 15.95 T 2735 18.95 18.75 17.50 T 2800 15.50 14.75 14.05

www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999

All prices shown are RRP inc. GST. Tools 173

Adjustable Multi-Grip Pliers Cutters & Strippers

Heavy Duty Coaxial Stripper 3 Blade Deluxe Automatic Wire Stripper

4
8

new Heavy duty die cast construction, built to last a life-
time! Adjustable blades to suit stripping RG6/8/1,
The pliers of a thousand uses! From plumbing to auto- RG-58, RG-59, or RG-6 quad shield, 3C, 4C, 5C, tele- These easy squeeze, spring loaded, auto wire strip-
motive repairs. Adjustable jaws from 0 to 42mm. phone and power cable.
32mm jaw depth. Length 254mm. pers will remove insulation on cable instantly.
T 1526: 1.0, 1.6, 2.0, 2.6, 3.2mm2.
Price Each RRP 4+ 10+ Price Each RRP 4+ 10+ T 1527: 0.5, 1.2, 1.6, 2.0mm2.
T 2862 23.95 21.55 19.35
T 1513 34.95 32.90 30.90
T 1514 Spare blades 7.50 6.95 6.50

4 Piece Circlip Plier Set Price Each RRP 4+ 10+

F Connector Seating Tool T 1526 1.0-3.2mm 22.95 20.65 18.35
T 1527 0.5-2.0mm 22.95 20.65 18.35
Aids the installation of
new F connectors on to Automatic Wire Stripper
coaxial cable. Suits
RG58, RG59 and RG6
cable.

Suitable for internal and external circlips between 10 Price Each RRP 4+ 10+
and 50mm. Includes straight, 45° and 90° jaws. T 1558 RG58/RG59/RG6 9.95 8.50 7.50
Jaws are easily interchanged for tackling different
servicing jobs. Length: 155mm. Includes inbuilt cutter. Insert cable and squeeze the
handle for an easy and accurate strip. With adjustable
Price Each RRP 4+ 10+ Folding 17 in 1 Multitool tension and strip length.
T 2785A 17.95 16.50 14.50
A compact multitool,
Multi-Purpose Snips perfect for hikers, Price Each RRP 4+ 10+ Tools
campers, or even in
the glovebox. Supplied T 1522 18.95 18.15 17.35
with beltpouch. T 1525 Spare blade set 3.65 3.35 3.10

Adjustable Wire Stripper 6

Super sharp stainless steel scissors suitable for cut- Features: • 2 knives • saw blade • fish scaler • 3 flat
ting cloth, carpet, linoleum, leather, cardboard, tin blade screwdrivers • phillips screwdriver • 2 files • can
plate, foam rubber, ribbon cable etc. Includes safety opener • bottle opener • 2 pliers • wire cutters • 2 rulers
latch. Length 160mm.
Price Each RRP 4+ 10+
Price Each RRP 4+ 10+ T 2280 18.95 17.75 16.50 Easy to use. Jaws incorporate cutting and stripping
T 1490 11.95 10.95 9.75 blade. With hardened jaws.

Coaxial Stripper 2 Blade Folding 9 in 1 Multitool Price Each RRP 4+ 10+
new T 1510 8.40 7.60 6.75

4/6/8/12 Ratchet Conduit Cutters

Tough injection moulded plastic. Features a centre A premium multitool, perfect for hikers, campers. Or
conductor cutter and selector for RG58, RG59, or RG6 just keep it handy in the glovebox for when you need
quad, 3C, 4C and 5C (4, 6, 8 and 12mm stripping it. Supplied with beltpouch.
lengths).

Price Each RRP 4+ 10+ Features: • Serrated knife • Saw • Can opener • Philips Easily cuts through conduit 6mm to
screwdriver • Knife • Flat file • Blade screwdriver • Bottle 42mm in diameter. Includes catch to
T 1516 Strippers 19.95 16.00 15.00 opener • Spring loaded pliers with cutter. lock handles closed when not in use.
T 1517 Spare blades (Pk 6) 7.55 6.80 6.05

Universal Cable Stripper Price Each RRP 4+ 10+ Price Each RRP 3+ 6+
T 2284 29.95 26.95 24.25 T 2855 19.95 17.95 15.95

Wire Strippers Flat Cable Cutter

Strips computer cable, speaker wire, hookup wire, Strips 16 - 26 gauge AWG (0.14-1.4mm2). Spring Incorporates steel wire cutter. (Up to 3mmØ). Cuts up
coaxial cable & flat (modular) phone cable. Removes loaded. Sharp jaws easily cut into sheath. to 30mm wide rainbow or ribbon cable.
outer sheath without damage to braiding. Adjustable
stripping depth & built in cutters.

Price Each RRP 4+ 10+ Price Each RRP 4+ 10+ Price Each RRP 4+ 10+
T 1512 11.95 10.75 9.50 T 1530 11.50 10.35 9.20
T 1520 18.50 16.95 15.55
T 1521 Spare blades (Pk 6) 7.90 7.50 6.50

Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au

174 Tools All prices shown are RRP inc. GST.

Crimping Ratchet Wire Ferrule Crimper

Cable Cutters Ratchet Modular Crimper

Cuts cables up to 9.5mm in diameter. Includes catch Designed to crimp 4, 6 and 8 way modular
to lock handles closed when not in use. connectors. Simple ratchet action ensures an easy,
reliable crimp every time. Cable cutter/stripper also
Price Each RRP 4+ 10+ included. All metal construction. Designed to crimp wire ferrules from 4 sides simulta-
T 2850 14.45 13.00 11.55 neously for an ultra reliable connection. All metal de-
sign with ratchet action. Suits cabling from 10 to
Price Each RRP 4+ 10+ 26AWG. 175mm length.

Box Cutter Knife T 1565A 28.95 26.50 24.00 Price Each RRP 2+ 4+
T 1564 Spare blades 11.50 10.30 9.25 T 1547 109.00 99.00 89.00

Ratchet Ferrule Crimp Tool

A toolbox essential. Uses standard utility knife blades. Professional Ratchet Modular Crimp Tool
Diecast body and retractable blade.

Price Each RRP 2+ 4+
T 1485 9.95 9.00 8.00

UTP Impact Punchdown Tool Cuts, strips and crimps modular cabling and Professional grade crimper suitable for single and
new connectors. Suits 4, 6 or 8 way RJ modular plugs. All double ferrules in the range 12-20AWG (0.5mm -
metal construction with comfortable soft rubberised 4mm2). Ratchet action handle. All metal construction.
grips. Top quality construction, built to last. Suits Altronics H 2415A series connectors.

Price Each RRP 2+ 4+
T 1546 59.00 56.00 49.20

Tools A professional quality UTP punchdown tool for Price Each RRP 4+ 10+ Ratchet Terminal Crimping Tool
terminating 110 style terminal blocks. Adjustable
impact force setting. Krone terminal blade available T 1571 149.00 140.00 130.00
separately. Great for comms installers. T 1572 Spare stripper blades 6.85 6.15 5.45
T 1573 Spare cutter blades 6.85 6.15 5.45

6 Price Each RRP 2+ 4+ Multifunction Stripper & Crimper
T 1607
T 1608 110 Blade 59.95 53.95 47.95
T 1609 Krone Blade 17.95 16.20 14.40
17.95 16.20 14.40

UTP Impact Punchdown Tool Professional grade ratchet action crimp tool for crimp-
ing header pins to take wire from 14 to 22 AWG (0.5-
2.0mm2). Suitable for P 5640 series headers.

Price Each RRP 4+ 10+
T 1538 39.95 36.95 32.95

Combines a spring loaded ratchet wire stripper, cut- IDC Crimping Tool
ting blade and kwik-connect crimper in a single tool.
Used for seating UTP wire into KRONE® and 110 Saves space in the toolbox! Suits 10-24 AWG cable.
style terminal blocks. With built in wire removal finger. Crimps red, blue and yellow kwik connectors.

Price Each RRP 4+ 10+ Price Each RRP 4+ 10+
T 1603 21.80 19.50 18.00 T 1528 29.95 25.95 22.95

UTP Punchdown Tool Ratchet Automotive Crimp Tool Models to suit IDC plugs and IDC tran-
sitions available. Commonly used for
data connections. T 1540 crimping
distance from 6mm to 27.5mm (with
included attachment).

Used for seating UTP wire into KRONE® style 66, Price Each RRP 4+ 10+
110/88 terminal blocks. Includes wire stripper.
T 1540 IDC Plug Crimper 29.95 26.95 23.95
Price Each RRP 4+ 10+ Professional grade automotive ratchet crimper. Suits T 1542 IDC Transition Crimper 29.95 26.95 23.95
T 1610 7.50 6.75 5.95 red, blue & yellow crimp lugs. All metal construction.

Price Each RRP 4+ 10+ Gel Filled Connector Crimper
T 1552A 39.95 35.90 31.90
Deluxe Ratchet Modular Crimper

Automotive Crimping Tool

Crimps 4, 6 and 8 way modular connectors. All metal Suits red, blue and yellow connectors. Designed to seat UG, UR and UY connectors without
construction - built to last. Also features cable stripper Includes cutters and stripper. damaging the connector body. Includes cutting sur-
and cutter. Adjustable ratchet release. face. All metal construction. Suits Altronics H 1965
series connectors.

Price Each RRP 2+ 4+ Price Each RRP 4+ 10+ Price Each RRP 4+ 10+
T 1568A 87.95 82.95 79.15 T 1550 6.85 6.15 5.45 T 2787 15.95 14.40 13.40

www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999

All prices shown are RRP inc. GST. Tools 175

Professional Cable Tie Crimping Gun Crimping

Coaxial Crimping Tools 7 in 1 Ratchet Multi-Jaw Crimping Kit

Automatically tightens and cuts cable ties with a sim- Adjustable crimp tension with ratchet A unique ratchet crimping kit supplied with 7 sets of
ple pull of the trigger! Great for cable harness assem- action handles. Heavy duty all metal crimping jaws. Each jaw pair slides into the crimper
blies, automotive & production work etc. All steel construction. and is held in place by magnets - no fiddly screws or
construction. Suits cable ties 2.2 to 4.8mm width. T 1554: Suits BNC, TNC and PL259 fitted to RG6, tricky alignment required. Kit includes jaws to suit
RG58 or RG59 cables. Suitable for ferrules with OD insulated kwik crimps, uninsulated lugs, telephone
Price Each RRP 4+ 10+ 6.5mm (P 0521) and 7.4mm (P 0520). spade lugs, shoelace ferrules, RG58, RG59 RG62 and
T 2346 29.95 27.90 26.50 T 1555: Suits RG58, Fibre Optic, SMA, SMB and RG6 coax crimps and D-Sub connector pins. All
RG174. Suits P 0525 BNC & P 0271 RCA (5.3mm OD supplied in an ABS carry case.
ferrule).

Terminal Crimping Tool Price Each RRP 4+ 10+

T 1554 39.95 35.90 31.90
T 1555 39.95 35.90 31.90

Coaxial “F” Crimping Tool Price Each RRP 2+ 4+
T 2177 135.00 125.00 109.00

Compression Crimping Tool

Crimps header pins, telephone terminals and small Suits crimp type F connectors. It crimps ferrules with
non-insulated quick connectors. Incorporates wire cut-
ters and spring loaded handles. overall diameter of 10.8mm. Adjustable crimp tension
T 1548: Suits Altronics H 1980 series terminals. with ratchet action. T 1556: Suits P 0481 connector.
T 1537: Suits Altronics P 5470 series headers. Cable T 1557: Suits P 0486 Austar connector
size 20 to 28 AWG (0.1-0.55mm2).

Price Each RRP 4+ 10+ Price Each RRP 4+ 10+ Tools

T 1548 17.50 14.50 13.50 T 1557 RG6/11/59 29.95 26.50 23.50 RCA BNC/PAL F
T 1537 19.95 17.50 15.50 T 1556 RG6/11/213 29.95 26.50 23.50

Solar Connector (MC-4) Crimping Tool This heavy duty steel tool can be adjusted to suit com- 6
pression F, BNC, PAL & RCA connectors. Built for the
Deutsch® Connector Crimping Tool rigours of everyday use. Suits RG59, RG6 & RG11.

Price Each RRP 2+ 4+
T 1562 83.50 77.00 72.00

Ratchet Compression Crimping Tool

Heavy duty, all metal ratchet crimp new
tool designed specifically for terminating industry
standard solar connectors for 4mm2 (11AWG) cable. Designed to crimp pins to suit Deutsch® DT multi-pole
Adjustable crimp tension. Suitable for Altronics range connectors. It crimps from 4 sides at once ensuring a
of solar connectors. Essential for solar installers. reliable connection. Suits up to size 16 terminal pins
in DT connectors (P 7880 - 86 - see page 336).

Price Each RRP 4+ 10+ Price Each RRP 10+
T 1535 124.00 118.00 110.00 T 1532 47.00 44.00

Ratchet Coaxial Crimping Kit 10 in 1 Ratchet Multi-Jaw Crimping Kit RCA BNC/PAL F

This heavy duty steel tool can be adjusted to suit com-
pression F, BNC, PAL & RCA connectors and suits
both straight and right-angled connectors. All metal
construction. Suitable for RG59, RG6 and RG11. For
stripping detail on plugs, see connectors section.

Price Each RRP 2+ 4+
T 1563 99.00 89.00 79.00

Economy Compression Crimping Tool

new

A complete kit for crimping all types of coaxial RF A unique ratchet crimping kit supplied with 10 sets of new
connectors. Kit includes an all metal ratchet crimp crimping jaws. Each jaw pair slides into the crimper
tool with 5 sets of interchangeable jaws to suit BNC, F, and is held in place by magnets - no fiddly screws or Compression crimps are now becoming popular
TNC, N, PL259, PAL & SMA connectors. Also included alignment required. Kit includes jaws to suit insulated within the AV industry. This heavy duty die cast tool
is a coaxial wire stripper, a set of cable cutters and kwik crimps, uninsulated lugs, telephone spade lugs, can be adjusted to suit compression F, BNC, PAL &
screwdriver (for changing jaws). Supplied complete shoelace ferrules, RG58, RG59 RG62 and RG6 coax RCA connectors. Suitable for RG59, RG6 and RG58.
inside a tough ABS plastic case. A must have for crimps D-Sub connector pins and 4,6 and 9 pole RJ For stripping detail on plugs, see connectors section.
MATV, CCTV and cable TV installers. connectors All supplied in an ABS carry case.

Price Each RRP 2+ 4+ Price Each RRP 2+ 4+ Price Each RRP 2+ 4+
T 2174 109.00 99.00 89.00 T 2178 169.00 155.00 139.00 T 1575 29.95 26.95 24.25

Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au

176 Tools All prices shown are RRP inc. GST.

Anti-Static Mats & Screwdrivers BNC / F Installation Tools

Lug Crimper Magnetic Work Mat

new

new 25 x 20cm work mat made from magnetic material -
keeps those tiny screws, clips and nuts in place when
Steel crimp tool for cable lugs to suit cabling between servicing equipment. Includes whiteboard marker. Allows you to easily connect BNC or F leads even
12 and 4 AWG ( 3.0mm2 to 25mm2). 350mm when located in racking or tight spaces. Ideal for
length. Ideal for heavy duty power wiring in automo- Price Each RRP 4+ 6+ equipment such as matrix mixers, DVRs etc where
tive and solar systems. Suits yellow insulated lugs & T 4015 12.95 11.35 10.35 many connectors are often crammed onto a small
uninsulated lugs up to 25mm2 conductor area. rear panel. 310mm shaft length.

Price Each RRP 2+ 4+ Vernier Type Calipers Price Each RRP 3+ 6+
T 1531 99.95 89.95 79.95
T 1581 Suits F Connector 19.95 18.50 16.50
T 1583 Suits BNC 19.95 18.50 16.50

Heavy Duty Lug Crimper Folding Allen & Star Key Sets

High quality metal calipers for precise measurement. T 2100 T 2215
150mm length. Measures internal, external & depth
sizes down to 0.02mm. Easy to read dial gauge.

Rugged cast steel crimper designed for 8AWG to 250 Price Each RRP 2+ 4+ Perfect for service technicians. Manufactured from
MCM cable lugs (10mm2 to 120mm2). Suitable for in- T 2245 39.95 36.00 32.00
sulated or non-insulated lugs such as H 1763 series. high quality nickel plated steel.
Commonly used for making high current battery leads Surface Mount Pickup Tool T 2215: Allen key set. Sizes:1.5, 2, 2.5, 3, 4, 5, 6mm.
in solar installations. 570mm length. T 2100: Star key set. Sizes: T9H , T10H, T15H, T20H,
T25H, T27H, T30H, T40H.

Tools Price Each RRP 2+ 4+ Price Each RRP 4+ 10+
T 1533 165.00 155.00 145.00
T 2215 Allen key 5.95 5.40 4.50
T 2100 Star key 14.50 13.50 12.60

6 Anti-Static Mat & Lead Philips Driver Bits - 10pc Packs

55 x 30cm size allows This lightweight, portable vacuum tool is perfect for
you to work on static picking up and placing small SMD parts.
sensitive items without
the risk of static Features • One handed operation • Includes angled & 10pc packs of commonly used (and worn out!) #1
damage. Fantastic for straight pickup adaptor arms, 3mm, 6mm & 10mm vac- and #2 Philips bits. 50mm length. Magnetized.
any assembly or service uum cups & carry case • Picks up 50 grams max.
work. Price Each RRP 2+ 4+
RRP 4+ 10+ Price Each RRP 4+ 10+
Price Each 18.50 16.65 14.80 T 2327 #1 Philips 19.95 17.95 15.95
T 4020 T 1350 Kit 59.95 54.00 48.00 T 2328 #2 Philips 19.95 17.95 15.95
T 1351 Pickup nozzle straight 12.95 11.95 11.00
Anti-Static Wrist Strap T 1353 Pickup nozzle 30° 12.95 11.95 11.00 6 Piece Long Shaft Screwdriver Set
T 1355 Suction pads (pack 3) 4.95 4.25 3.75

Elastic adjustable wrist strap allows full freedom of Nibbling Tool Includes 3 flat blades (2.4, 3.0, 3.8mm) and
movement while protecting components from static 3 phillips screwdrivers (#00, #0, #1). They have long
damage. Suitable for cutting holes in shafts which are ideal for reaching recessed screws.
steel, plastic and alu- Handles are moulded plastic and the shafts are
minium. Capacity: steel nickel chrome molybdenum.
1mm, aluminium 1.6mm.
Great for making one off
chassis panels etc.

Price Each RRP 4+ 10+ Price Each RRP 4+ 10+
T 2195 9.95 9.00 8.50
T 4002 1.8m 13.95 10.95 9.75
T 4005 3m 16.95 14.35 12.95 Price Each RRP 4+ 10+ Jewellers Screwdriver Set
T 2355 19.95 17.50 15.50
6 Piece. All drivers
Field Service Anti-static Mat Star Screwdriver flat blade type with
serrated grips and ro-
A 600 x 650mm Star bit without security centre. T-06 size used in lap- tating top ferrule.
rugged anti-static mat tops and mobile phones. Sizes: 1.0, 1.4, 2,
with two tool pockets 2.4, 3.0, 3.5mm.
and an anti-static wrist
strap. Ideal for service Price Each RRP 4+ 10+
technicians. T 2106 7.30 6.60 5.85

Price Each RRP 4+ 6+ Price Each RRP 4+ 10+
T 4030 42.50 39.60 36.40 T 2200 4.75 4.25 3.80

www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999

All prices shown are RRP inc. GST. Tools 177

6 Piece Screwdriver Set Screwdrivers

9 Piece 1000V Rated Toolkit 28 Piece Smartphone/Tablet Service Kit

High grade screwdrivers with comfortable hand grips. new
Set contains #0, #1, #2 philips, 3.0, 5.0, 6.0 flat
blade. Chrome vanadium shafts. This insulated toolkit is ideal for electricians, Replacing the battery or screen on your device? This
technicians and those working on mains powered handy kit contains everything you need to take apart
Price Each RRP 4+ 10+ equipment. It includes cutters, pliers, wire strippers, 5 modern smartphones, tablets & laptops. Housed in a
T 2198A 31.95 29.50 27.50 screwdrivers, 2 rolls of insulation tape, plus a neon handy plastic carry case.
test screw driver, all in a handy carry case.
Stubby Screwdrivers Set contains: • Driver handle with extension bar • Straight
tweezers • Dog leg tweezers • Plastic pick • Screen suction
Flat Blade Price Each RRP 2+ 4+ cup • Guitar pick shaped prying tool • SIM card removal tool
T 2175 59.95 54.00 48.00 • Two plastic prying ‘spudger’ tools • Steel prying tool
T 1965A 5.5mm • 2 x philips #0, #1 • 5 x flat blade 1.5 (2), 2.0 (2), 2.5
new Phillips Pro Series Screwdrivers • 5 x Star/Torx T4, 5, 6, 8, 10 • 2 x metric hex 1.5, 2.0
T 1967A #1 • Tri-wing #0 • 2 x Pentalobe 0.8, 1.2
T 1968A #2

The toolbox must have for getting to screws in tight Flat blade Price Each RRP 4+ 10+
spaces. Soft rubberised handle for comfortable grip. T 2164 29.50 26.75 23.60
Hard wearing chrome vanadium steel.

Price Each RRP 4+ 10+ Phillips
ALL 3.95 3.65 3.40
30 Piece Precision Driver Kit

Pro Miniature Screwdrivers Features ergonomic soft rubber handle. Chrome vana-
dium shaft. Ideal for manufacturers, installers, techni-
cians, etc.

Price Each Length RRP 4+ 10+ Tools

Flat Blade Phillips Flat Blade 145 4.40 4.10 3.75 new 6
T 1931D 1.6mm T 1941D #000 T 1950 3.2mm 195 6.20 5.60 4.95
T 1933D 2.4mm T 1942D #00 T 1955 5mm 208 7.15 6.45 5.70 An aluminium driver with rotating ferrule top for easy
T 1944D #0 T 1958 6mm servicing of precision high tech devices, computers
145 4.40 4.10 3.75 and comms equipment. Includes 70mm extension
Tips made from rugged, hard wearing chrome vana- Phillips 195 6.20 5.60 4.95 bar and 28 4mm hex bits.
dium steel. Rubberised grip and a 75mm shaft. T 1970 #0 208 7.15 6.45 5.70
T 1975 #1 Set contains: • 1 Driver handle • 5 Slotted, 0.7, 1.0, 1.2,
T 1978 #2 1.5, 1.8mm • 4 Phillips, #000, #00, #0, #1 • 4 Pozi, #000,
#00, #0, #1 • 5 Metric Hex, 0.7, 0.9, 1.3, 1.5, 2.0 • 4 Torx,
Price Each RRP 4+ 10+ 8 Piece Mini Driver Set T4, T5, T6, T7 • Triangle 3.0mm • Pentagon 2.0mm • Tri-
ALL 4.95 4.50 4.00 wing 3.0mm • Snake-eye 2.6mm • Square S0 • Round
1mm needle tip.
1000V Insulated Screwdrivers

Flat blade

Phillips Price Each RRP 2+ 4+
T 2173 24.95 22.50 20.00

Rated at 1000V with insulated shaft. Super Precision screwdrivers with rotating ball bearing top 58 Piece Precision Driver Kit
comfortable rubberised grip. Heat treated chrome ferrule. Contains 5 flat blade (2, 2.5, 3, 3.5, 4mm)
vanadium tips for long life. and 3 phillips head drivers (#0, #1). Supplied in a ro-
bust carry case. Ideal for telecommunications gear,
Price Each Length RRP 3+ 6+ laptops etc.

Flat Blade 100 4.50 3.95 3.60 Price Each RRP 4+ 10+
T 1982 4mm 150 4.95 4.45 3.90 T 2187A 19.95 18.00 16.50
T 1984 6.5mm
80 4.95 4.45 3.90
Phillips 100 4.95 4.45 3.90
T 1987 #1
T 1988 #2

20 Piece Mini Driver Bit Set The perfect do-it-all driver set for working on precision
equipment, telecommunications and hi-tech devices.
6 Piece Insulated Screwdriver Set Contains a massive variety of fine security bits made
from super tough molybdenum vanadium steel. Er-
gonomic handle allows magnetic bit holder to be ad-
justed up to 240mm in length.

This set of screwdrivers is ideal for people who service Packaged in a rugged case, this set includes a screw- Set contains: • 1 Driver handle • 1 Bit holder • 7 Slotted,
240V appliances. They are rated at 1000V and the driver handle and 20 mini screwdriver bits including 1, 1.5, 2, 2.5, 3, 3.5, 4 mm • 4 Phillips, #000, #00, #0, #1
shaft is insulated to the tip. Includes 2 slotted and 3 Torx, slotted, Pozi, and Hex. Ideal for communications • 2 Pozi, #0, #1 • 7 Metric Hex, 0.7, 0.9, 1.3, 1.5, 2, 2.5, 3,
phillips screwdrivers, plus a 240V neon tester. or PC servicing. 4mm • 7 Imperial Hex, 0.028”, 0.035”, 0.05”, 1/16”,
5/64”, 3/32” • 7 Ball Hex, 1.5, 2, 2.5, 3, 1/16”, 5/64”,
3/32” • 3 Hex sockets, 2, 2.3, 2.5mm • 9 Torx, 3, 4, 5, 6,
7, 8, 9, 10, 15 • 8 Security Torx, 5H, 6H, 7H, 8H, 9H, 10H,
15H, 20H • 1 Triwing TR1 • 1 Triangle 2mm

Price Each RRP 3+ 5+ Price Each RRP 4+ 10+ Price Each RRP 2+ 4+
T 2194 19.95 18.50 15.50 T 2185 21.95 19.95 17.75 T 2186 49.95 46.50 44.50

Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au

178 Tools All prices shown are RRP inc. GST.

Screwdrivers 17 Piece Mini Ratchet Driver Kit

19pc Technicians Field Service Kit 40 Piece Ratchet Driver Kit

Superb quality ratchet driver with a wide selection of This ultra compact ratchet kit is ideal for working in
bits for most electronic jobs. Great for the home tight spaces inside equipment. Supplied with a variety
handyman or enthusiast. Ratchet driver allows of driver bits and hex sockets.
operation at a variety of angles up to 90°. It features
A combination of spring loaded a soft rubber handle for all day use. Kit contains: Ratchet driver •#1, #2 phillips • #1, #2
pliers/cutters and ferrule top pozidrive • T10, 15, 20 torx • 4, 5 & 6mm flat blade • 5, 6,
screw drivers in a tough folding 7, 8, 9, 10mm 1/4” drive hex sockets.
carry case. All cutters and pliers
have soft rubber handles for Set contains: • 1 Ratchet driver • 1 1/4” drive hex adaptor Price Each RRP 2+ 4+
added comfort. • 1 Magnetic bit holder • 11 Sockets, 4, 5, 5.5, 6, 7, 8, 9, T 2169 18.50 17.50 16.25
10, 11, 12, 13 mm • 5 Slotted, 3, 4, 5, 6, & 8 mm • 7 Hex,
2, 2.5, 3, 4, 5, 6, 7 mm • 4 Phillips, #0, #1, #2, #3 • 4 Stubby Ratchet Driver Kit
Pozi, #0, #1, #2, #3 • 6 Torx, 10, 15, 20, 25, 30, 40

Kit contains: • Needle nose pliers • Bent needle nose pliers Price Each RRP 2+ 4+
• Serrated plier/cutter • Side cutters • Bull nose pliers • T 2168 49.95 44.95 39.95
Flat pliers • Fine tip tweezers • 3 x philips #00, #0, #1 • 3 x
flat blade 2.0, 2.5, 3.0 • 6 x Star/Torx T6, 7, 8, 9, 10, 15 16 In 1 Heavy Duty Ratchet Driver Set

Price Each RRP 4+ 10+
T 2152 42.95 38.50 34.50

*Colour may vary. Available in 10pc bulk
pack for resellers

129 Piece Home Tool Kit A handy ratchet driver for the car glovebox or tackling
jobs around the house. Includes 7 driver bits in the
handle, 3 flat blade, 3 phillips, 1 square drive.

Tools Price Each RRP 4+ 10+
T 2191 9.95 8.95 7.95

Ideal for service technicians and enthusiasts. The 3 22 Piece Palm Ratchet Driver Kit
way high torque ratchet combines with the 8 double
6 ended, chrome plated bits. Adjustable shaft length
from 33mm to 136mm. A rubber non-slip handle has
plenty of grip and comfort.

Kit contains: Ratchet driver • #1, #2 phillips • #1, #2
pozidrive • 5, 6mm Hex drive • 5, 6mm Hex drive ball
• 4, 5, 6 & 7mm flat blade • T20, 25, 30, 40 torx

A complete handyman’s tool kit for tackling jobs Price Each RRP 4+ 10+
around the house, working on car electrics, electronic T 2167 39.95 36.00 32.00
repairs and more! All supplied in a plastic case.
Precision Ratchet Driver Set A ratchet wrench designed for working in tight spaces.
Kit contains: • Claw hammer • Side cutters • Long nose Fits in the palm of your hand, or use with the optional
pliers • Adjustable wrench • Wire stripper/crimper Extendible shaft for screw in wrench handle. Supplied with a variety of
• Ratchet driver • Snap blade knife • 2 Phillips drivers #0 easy servicing. tips and sockets for general electronic servicing.
#00 • 2 Slotted drivers 1.5, 2.0mm • Spirit level • 3.5m
tape measure • 16 SAE and metric hex keys • 20 ratchet Kit contains: Ratchet driver • Screw in handle • 5, 6, 7, 8,
driver bits - slotted, square, phillips, torx, hex • 2 bit holders 10mm 1/4” drive sockets • 3, 4 and 6mm flat blade tips
• Assorted fasteners • #1, #2, #3 phillips • 2.5, 3, 4, 5 and 6mm hex/allen tips
• T10, T15, T20 torx • Socket drive adaptor

Price Each RRP 4+ 10+ A 12 in 1 driver set with ratchet action designed for Price Each RRP 2+ 4+
T 2172 59.95 55.00 50.00 service technicians & general electronics use. Ideal T 2171 32.95 30.50 27.50
for comms gear, mobile phones, laptops etc. Can be
25 Piece Combination Tool Kit locked as a normal driver if required. 33 Piece Driver Bit Sets

Kit contains: Ratchet driver with extension bar • #000, #00,
#0 phillips bits • 1.5, 2 & 2.5mm flat blade bits • T4, T6,
T7, T8, T10, T15 torx bits

Price Each RRP 4+ 10+
T 2189A 19.95 17.95 16.95

T 2180 T 2182

Hex Bit Driver & Nut Runners 33 pieces, all housed in a handy plastic holder. Great
new for the tool box, workbench, etc.

A combination tool kit containing a wide variety of T 2180 Security bit set contains: • 4 Triwing, 1, 2, 3 & 4
tools, handy for a wide range of household and elec- • 9 Security torx, 8, 10, 15, 20, 25, 27, 30, 35 & 40H • 4
tronic jobs. Housed in a handy fold out case. Ideal en- Snake eye, 4, 6, 8 & 10 • 12 Hex metric 2, 2.5, 3, 4, 5 & 6
thusiasts, hobbyists, technicians etc. • 6 Hex imperial 5/64, 3/32, 7/64, 1/8, 9/64 & 5/32 • 3
Torq, 6, 8 & 10 • Magnetic hex extension bar

Kit contains: Side cutters • Long nose pliers • 6 Jeweller T 2179A features a magnetic tip and suits all T 2180, T 2182 Driver set contains: • 5 Slotted, 3, 4, 5, 6, & 7 mm
drivers • Tweezers • Handle & extension bar • 4 sockets, 7, T 2182 hex bits. • 8 Phillips, #0, 2 x #1, 3 x #2, 2 x #3 • 7 Pozi, 2 x #1, 3 x
8, 9 & 10mm • 9 bits,2 phillips, 2 slotted and 5 torx #2, 2 x #3 • 6 Hex (metric), 2, 2.5, 3, 4, 5, 6 • 6 Torx, 10,
15, 20, 25, 30, 40 • Magnetic hex extension bar

Price Each RRP 4+ 10+ Price Each RRP 4+ 10+ Price Each RRP 4+ 10+
T 2170 19.50 17.55 15.55
T 1812A Suit 3mm nuts 5.95 5.40 4.80 T 2180 Security bit set 10.95 10.00 9.50
T 1814A Suit 4mm nuts 5.95 5.40 4.80 T 2182 Driver bit set 8.95 8.00 7.50
T 2179A Hex driver 7.50 6.75 6.00

www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999

All prices shown are RRP inc. GST. Tools 179

Interlocking Parts Drawers Parts & Tool Cases

Parts Tray With Five Dividers Large Aluminium Laptop Case

new *Parts for
illustration purposes.

Units can be “ganged” together, singles and Clear polycarbonate parts trays with two adjustable di-
doubles can be intermixed viders. These are the same trays used in Altronics
shops to store components. Five dividers per tray.
A versatile storage system allowing multiple units to
be dovetailed together. Additional units can be added Price Each RRP 5+ 10+ Suits widescreen laptops and accessories.
at any time! Picture illustrates 9 interlocked units, sold H 0232 295L x 149W x 74Hmm 9.95 8.95 7.95 Foam insert can be customised to suit laptops, acces-
in single or double drawer units.
sories etc. Latches are lockable. Features a perforated
Price Each RRP 6+ 12+ Mini Aluminium Tool Case
foam inner for customising the inside of the case to
H 0235 Single 115 x 120 x 50 7.95 7.20 6.60
H 0236 Double 115 x 120 x 50 8.95 8.25 7.75 hold equipment firmly in place. Shoulder strap in-

cluded. Aluminium construction.

Clear Economy Parts Cases Price Each RRP 4+ 10+
T 5019 550 x 375 x 90mm 69.95 62.95 59.95
Made from clear see
through plastic these Tuff Nut® Protective ABS Cases
parts cases are ideal
for storing nuts, bolts,
washers and compo-
nents.

Price Each RRP 4+ 10+ Fantastic for just about any storage purpose. Latches Tools
are lockable (2 keys provided). Features a perforated
H 0248 175 x 95 x 38 5 way 3.95 3.50 3.30 foam inner for customising the inside of your case to
H 0246 260 x 175 x 43 15 way 9.95 9.30 8.75 hold microphones, camera equipment etc. Includes
H 0245 209 x 117 x 31 18 way 5.50 4.95 4.50 pockets for up to 6 tools.

Double Layer Small Parts Case Price Each RRP 4+ 10+ T 5050
T 5000 330 x 230 x 90mm 39.95 35.90 31.90 T 5052

Unique parts case features Large Aluminium Tool Case 6
adjustable dividers for up
to 15 compartments on T 5054
one side, plus 10 remov-
able containers on the
other side. Two sets of
clips allow you to open one
side at a time.

Price Each RRP 4+ 10+
T 5036 340x280x80mm 29.95 27.50 25.00

Parts Storage Drawers Fantastic tool case for service technicians. With 5 ad-
justable dividers and 17 tool pockets. Lockable latches
H 0237 (2 keys provided). Tools for illustration purposes.

Price Each RRP 4+ 10+ T 5065
T 5020A 460 x 325 x 150mm 59.95 53.95 47.90
IP67 rated for the ultimate dust and water protection
Soft Tool Case for your precious equipment. Ideal for storing test
equipment, cameras, computers and sensors. High
H 0239 density foam inner can be customised to suit each
piece of equipment. The lid is fitted with foam to
Handy storage for the workbench. After evaluating This professional heavy duty soft tool case is great for ensure a secure fit. Latches may be padlocked for
many models, these drawers were by far the best the technician on the road, service people etc. Three added security. T 5052, T 5054 & T 5065 include
quality we found. Each model is supplied with a full exterior pockets for storing documents, large tools, shoulder strap. All models include perforated high
set of crystal transparent drawers. laptop or PDA. 50 interior pockets for tools, crimpers, density foam insert & egg shell foam lined lid.
screwdrivers etc. Dimensions: 440 x 320 x 130mm.
T 5065 suitcase style
is fitted with luggage type
wheels and retractable trolley
handle for easy
transportation.

Price Each RRP 2+ 4+ Price Each RRP 4+ 10+ Price Each RRP 2+ 4+
40.50 37.95 T 5100 119.00 110.00 99.00
H 0237 347W x 152D x 187Hmm 42.95 T 5050 365 x 270 x 169mm 98.50 90.00 80.00
H 0238 Dividers to suit H 0237 4.95 61.95 58.95 T 5052 456 x 372 x 185mm 179.00 162.00 144.00
H 0239 447W x 180D x 246Hmm 64.95 T 5054 515 x 435 x 199mm 269.00 245.00 220.00
H 0240 Dividers to suit H 0239 4.95 T 5065 650 x 430 x 250mm 485.00 450.00 399.00

Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au

180 Tools All prices shown are RRP inc. GST.

Inspection Tools

Tool Boxes The Ultimate Engineers 6 in 1 Pen 15x Examination Loupe
new
This compact loupe provides a
quick way to examine objects up
close. Ideal for PCB track
inspection, checking for dry joints
etc. High 15x magnification.

Features a pen, three way scale Price Each RRP 2+ 4+
ruler, tablet stylus, blade screw- T 1470 8.95 8.00 7.80
driver, philips screwdriver and
spirit level. All housed in a tough Includes spirit 3.5x Handheld LED Magnifier
metal casing. level.

Handy tool boxes constructed from impact resistant Price Each RRP 4+ 10+
polypropylene plastic. Ideal for storing all your elec- T 1924 13.50 12.15 10.80
tronic hand tools, in one organised & portable place.
Lift out section for smaller tools allows bulky tools to Blow Brush Air Duster
fit underneath. 5kg load capacity.

Price Each RRP 4+ 10+ High quality 10 diopter 46mm glass lens aided by 2 x
14.95 13.45 12.10 LEDs for illumination. Great for stamp and coin
T 5030 315x175x130mm 5kg 29.95 28.00 26.00 collectors. Runs on 3 x AAA batteries.
T 5032 410x210x185mm 10kg

Clip-On Tool Belt Price Each RRP 4+ 8+
X 0430 12.95 11.00 10.50
Keeps your tools handy
at all times. Made from This 62mmØ bulb air duster allows quick removal of 8-40 Pin IC Removal Tool
durable heavy duty can- dust and debris from inside equipment & keyboards.
vas material this ad- Supplied with two nozzles - fine point or brush type.
justable belt pouch Approx 130mm long.
features several pockets
and loops to hold your Price Each RRP 2+ 4+
tools. Dimensions: T 1480 11.95 10.95 9.60
280 x 230 x 150mm.
Tools new Solvent Dispenser Price Each RRP 4+ 10+
Price Each T 2550 8-40 pin type 2.30 2.10 1.85
T 5110A This handy 180ml pump
RRP 4+ 10+ action solvent dispenser PLCC Removal Tool
6 39.95 36.00 32.00 pumps a measured amount
of contained liquid into the
Telescopic Inspection Mirror stainless steel bowl cap.
ESD Safe.

Price Each RRP 4+ 10+
T 2570 PLCC type 9.95 8.75 7.75

Ideal for seeing into awkward areas when servicing Price Each RRP 4+ 10+ Component Leg Bending Tool
equipment. 360° adjustment for wide viewing angle. T 3030 22.95 21.00 19.00
Enables accurate bending
Price Each RRP 3+ 6+ Bottle Dispenser With Needle Nozzle of axial leaded compo-
T 2342 12.95 11.95 11.25 nents in preparation for
PCB loading. Five bend-
Magnetic Pick Up Tool ing widths: 7.5, 10, 12.5,
15, 17.5mm. A real time
Extends from 170 to 540mm. Allows you to apply non-corrosive liquids precisely saver when building kits
where you require them. Spill-proof 59ml polyethlene or prototypes.
squeeze bottle equipped with a blunt stainless steel
Features a telescopic shaft with a strong magnet for needle to eliminate messy spillage, waste and evapo- Price Each RRP 4+ 10+
retrieving metal parts from awkward spots. Great for ration. T 1495 2.50 2.20 1.95
working on cars or electronic devices.
Price Each RRP 4+ 10+ 75mm Multi Angle Mini Vice
Price Each RRP 4+ 10+ T 3028 5.95 5.50 5.00
T 2385 8.95 7.65 6.80 Manufactured from
diecast alloy. Clamps to
Magnifier Head Goggles any bench surface up to
53mm thick. Jaws open
Flexi Magnetic LED Pick Up Tool to 55 mm. Vice mount
can be angled up to 45°
new in a 360° arc. Also for
added flexibility the vice
A handy tool for locating and retrieving parts in tight Offers three levels of magnification (1.5x, 2.6x, 5.8x) can be locked into a 90°
spots where hands can’t reach. 500mm flexible in the one head mounted magnifier. Easily adjustable position. Includes soft
gooseneck is fitted with an LED light & magnetic tip. head band with tilting visor. Inbuilt LED lamp is also jaws for holding delicate
Includes 3 x LR41 1.5V button batteries. adjustable (requires 2 x AAA batteries) allows a crisp connectors. Just like an
clear view. Ideal for service technicians. extra pair of hands!

Price Each RRP 4+ 10+ Price Each RRP 4+ 8+ Price Each RRP 4+ 10+
T 2341 19.95 18.95 17.95 T 2555 29.95 26.95 23.95 T 2367 39.50 35.50 33.50

www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999

All prices shown are RRP inc. GST. Tools 181

Step Drill Bits Tweezers & Drill Bits

Self Closing Tweezers Chemtools® Silicon Potting Compound

New 1kg tubs! new
A two component silicone
Component for illustration only. compound formulated for
potting applications.
9 step drill bits allow you to drill different sized holes Self closing tweezers, ideal for holding and handling Offers excellent
in plastic, wood or metal without changing drill bits. surface mount devices (SMD). protection against impact
damage and completely
Price Each RRP 2+ 4+ Price Each RRP 4+ 10+ encapsulates for weather
T 2377 4.95 4.55 3.95 and humidity resistance.
T 2332 4-12mm 19.95 17.95 15.95 Easy 1:1 mix ratio.
T 2333 4-20mm 29.95 27.00 24.00
Needle Nose Tweezers Price Each RRP 4+

3mm PCB Drill Chuck H 1620 200gm 19.95 18.95
H 1621 1kg 99.00 93.50
Keyless chuck for PCB
drill bits up to 3mm. Straight needle point tweezers, for precise work. Ferric Chloride
Suits power drill or
screwdriver. Price Each RRP 4+ 10+ Ferric chloride for etching
T 2375 3.70 3.30 2.90 copper PCBs. Supplied in
500ml bottle, premixed for
Price Each RRP 4+ 10+ SMD Precision Tweezers easy use. Simply pour into a
T 2305 7.95 7.50 6.70 plastic container or etching
tank and insert the PCB to
PCB Drill Bits be etched. Etching takes ap-
proximately 20 minutes.
Designed for handling tiny SMD components.

Price Each RRP 2+ 4+
T 2379 19.95 18.00 16.00

High speed tungsten carbide drill bits with thickened 4 Piece Tweezer Set Price Each RRP 4+ 10+ Tools
shaft for reduced flex. Ideal for drilling PCBs and H 0800 12.95 11.75 10.90
project enclosures. Includes plastic storage case. Set includes reversible
action (normally
Price Each RRP 4+ 10+ closed), curved needle Ammonium Persulphate Etchant 6
point, curved flat point
T 2320A 0.8mm 4.95 4.50 4.00 and straight needle A clean, easy to use PCB
T 2321A 1mm 4.95 4.50 4.00 point tweezers. non-acidic etching solution.
T 2322A 1.2mm 4.95 4.50 4.00 Supplied as a powder which
T 2323A 1.5mm 4.95 4.50 4.00 Price Each RRP 4+ 10+ is mixed with hot water. Etch-
T 2374 7.95 6.90 6.15 ing time takes approximately
10 minutes. 600g.
Pin Vice Needle File Set

new

Handy pin vice with two sets of double ended chucks. Price Each RRP 4+ 10+
perfect for very fine work where an electric drill will be H 0802 15.50 14.95 14.25
to forceful. Especially good for working with ABS case
panels and prototyping board. 1,2,3 and 3.5mm Kit includes flat, square, two triangular and a half Chemtools® 8406 Wicking Grade Glue
chucks. Suits any drill bit from 0.1mm to 3.5mm. round file. Ideal for PCBs, chassis mods, etc.

Price Each RRP 4+ 10+ Price Each RRP 4+ 10+ Cyanoacrylate Adhesive
T 2335 12.00 10.80 9.75 T 2352 9.95 9.25 8.50 works on wood, metals and
is ideal for bonding rubber
4 Piece Hook & Scribe Set components on handles,
tools, electrical appliances
Tapered Reamer and vehicle doors with win-
dow seals. 20gm. Equiva-
new lent to Loctite® 406.

Perfect for increasing hole sizes or deburring in plas- Stainless steel scribing tool set for marking plastic Price Each RRP 4+ 10+
tic, wood or metals. 13mm max hole size. panels, removing spring washers etc. T 3018 9.95 9.50 8.95

Price Each RRP 3+ 6+ Price Each RRP 4+ 10+
T 2372 14.50 12.95 11.35 T 2350 9.95 8.95 7.95

Chemtools® 8401 Surface Insensitive Glue

Automatic Centre Punch Alignment Tool Sets Designed specifically for
bonding to rough, porous or
Produces a neat indent into steel, aluminium or Ideal for adjusting trimpots, CB radio repairs etc. acidic surfaces. The Ethyl
plastic panels to locate a drill bit. Stops the drill from Cyanoacrylate formula
wandering, causing unsightly scratches. bonds with wood, cardboard,
balsa, rubbers, plastics,
metals & leather. 20gm.
Equivalent to Loctite® 401.

Price Each RRP 4+ 10+

Price Each RRP 4+ 10+ T 1400 4pc Double Ended 5.45 4.90 4.35 Price Each RRP 4+ 10+
T 2340 11.95 11.40 10.95 T 3016 9.95 9.50 8.95
T 1420 10pc Set 9.65 8.65 7.50

Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au

182 Tools All prices shown are RRP inc. GST.

Service Aids

Super Glue Chemtools® Label Remover Chemtools® Tamper Evident Bloc ID Glue

Original formula Super Glue Penetrates quickly and dissolves A quick drying tamper evi-
forms the strongest bonds today's high-strength adhesives, dent identification liquid,
in tight joints between clean glues, and gums. Can also be designed to lock poten-
breaks or smooth surfaces. used to remove grease, oil, gum, tiometers, nuts and screws
Best used with non-porous crayon and tar-like residues. and any other items where
surfaces. The glue bonds Pleasant citrus fragrance. 300gm evidence of tampering is
instantly, sets in seconds. aerosol. required. Red in colour.
2 x 3mL Tube pack 25ml.
new
Price Each RRP 4+ 12+ Price Each RRP 4+
T 3011 3.95 3.50 3.15 Price Each RRP 4+ 12+ T 3185 8.50 7.95
T 3177 11.50 10.95 10.25
WD-40® Anti-Corrosive Lubricant
Loctite® 2 Part Epoxy Glue
Isopropyl Alcohol A widely used anti-corrosive
Bonds in 5 minutes. Dries lubricant, cleaner and penetrating
clear to maximum strength Isopropyl alcohol can be oil. Ideal for cleaning and
in 1 hour. Supplied in a used as a universal loosening old nuts and bolts,
handy dual syringe to en- cleaner for electronic preventing squeaks and as a
sure accurate dispensation equipment. Ideal for re- water repellent. Great for
of glue. Ideal for gluing plas- moving dirt, grime, grease automotive, marine and
tic, ceramic, timber or and marks on equipment electronic/electrical use. A must
metal. cases etc. As well as have for any workbench, service
being a handy way to van or tool box.
clean PCB surfaces. new
99.9% purity. new
Price Each RRP 4+
Price Each RRP 4+ 10+ Price Each T 3170 T 3035 T 3110A 255g can 6.95 6.60
T 3006 6.50 6.15 5.75 T 3035 250ml spray bottle
T 3038 2L container
Tools Chemtools® 8243 Threadlocker T 3170 390ml aerosol RRP 4+ Circuit Board Cleaner

8.95 7.95 A premium blend of
26.95 24.50 solvents for general
12.95 11.95 purpose cleaning of
circuit boards. Will
Removable general-purpose remove oils, grease, dirt
and most resin based
threadlocking adhesive. Suited Overcoat PCB Resist Touch Up fluxes. T 3155 aerosol
features adjustable fine
for fasteners between 6-19mmØ. spray tube nozzle.

6 Tolerant of oil and other Designed to protect and
contamination. Protects threads insulate printed circuit board
tracks and components. The
from rust and corrosion. Suitable acrylic polymer forms a hard T 3155
permanent coating to protect
for stainless steel fasteners. against dirt, moisture and
fungus. A precise brush
10ml. Equivalent to Loctite® 243. applicator suits rework and
repair of solder masks. 15ml.
Price Each RRP 4+ 10+ Price Each RRP 4+ 12+
T 3117 10.95 10.50 10.00
T 3069 250ml aerosol 9.95 8.95 7.95
T 3155 420ml aerosol 11.95 11.20 10.50
T 3070A 1L container 27.95 25.00
Circuit Board Lacquer Price Each RRP 4+ T 3071A 2L container 52.00 48.00
T 3188 Green 15.95 14.95
A premium coating for pro-
tecting circuit boards from Chemtools® Thermally Conductive Glue Electronic Cleaning Solvent
humidity etc. It has excellent
insulating properties and is Ideal for bonding heatsinks to chips, CPU’s, high Ideal for cleaning delicate
suited to Australian condi- power displays. Note: not designed as a replacement electronic/ electrical assemblies,
tions. It contains a solder for heatsink compound. 100gm. video and tape heads etc. Will
flux medium to allow solder- not affect paints, plastics, or
ing of the board once lac- component markings. T 3150
quered. Can be removed features adjustable fine spray
with T 3069 board cleaner. tube nozzle.

Price Each RRP 4+ 12+ Price Each RRP 4+ 10+ Price Each RRP 4+ 12+
8.75 H 1617 29.95 28.75 27.00
T 3086 250ml aerosol 10.95 9.85 T 3066 250ml aerosol 9.95 8.95 7.95
T 3087A 1L container 49.95 45.00 T 3150 350ml aerosol 11.95 11.20 10.50

Chemtools® Heatsink Compound

Chemtools® UV+ Conformal Coating Deox R44 Spray

Provides a clear tough high gloss ROHS A must have for service tech-
finish to provide PCBs with a nicians. This amazing spray
high level of environmental new Aids heat transfer from devices to heatsinks. improves conductivity, de-oxi-
protection form dust, mould, dises, cleans and preserves
chemicals and physical abrasion. contacts, reduces intermit-
Contains an indicator for tent connections. Lubricates,
inspection under UV light. seals and protects against
400gm aerosol. moisture and corrosion.
300gm spray bottle
Price Each RRP 4+ 10+ new
H 1600A 10g Syringe 3.60 3.10 2.90
Price Each RRP 4+ 12+ H 1610A 150g Tube 21.95 20.00 18.00 Price Each RRP 4+ 12+
T 3175 15.95 15.10 14.20 H 1615A 50g Syringe 10.45 9.40 8.35 T 3163 14.95 13.50 11.90

www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999

All prices shown are RRP inc. GST. Tools 183

Contact Cleaner & Lube Service Aids & Tape

Ideal for cleaning and lubricating White Lithium Grease Self Amalgamating Tape
all non-arcing contacts, edge
connectors and switch A long lasting heavy duty Self amalgamating tape ac-
mechanisms. Safe on most lubricant designed for tually fuses together and
plastics. Fantastic for use on bearings, sliding mechanisms, forms a waterproof bond
noisy potentiometers. battery terminals, chains, around the object to which it
250ml, 175g. gears and other moving parts. is attached. 10m roll. 19mm
Sets dry for a thick coating. wide.
Reduces friction while
protecting against corrosion. Price Each RRP 4+ 10+
300g. T 2950 19.95 17.75 15.95

Price Each RRP 4+ 12+ Price Each RRP 4+ Double Sided Tape
T 3061 10.45 9.40 8.35 T 3122 9.95 8.95

Contact Cleaner Air Duster T 2986 T 2988

Ideal for cleaning all non-arcing Pure, high pressure gas for Double sided adhesive tape for a multitude of uses.
contacts, edge connectors and removing dust and airborne 2m length. T 2988: Outdoor/automotive type. Ideal
switch mechanisms. Safe on contaminants from delicate for situations where added adhesive strength is re-
most plastics. Fantastic for use equipment. Flammable type. quired.
on noisy potentiometers. 388ml, 350g.
Equivalent to CRC® 2016. 350g.

new Price Each RRP 6+ 12+

Price Each RRP 4+ 12+ T 2985 White 2m x 12mm 6.50 5.95 5.65
T 3160 15.95 14.95 14.00 T 2986 White 2m x 24mm 8.75 8.25 7.85
T 2988 Black 2.5m x 24mm 6.35 5.95 5.75

Price Each RRP 4+ 12+
T 3097 16.50 15.95 15.00

Chemtools® Flux Remover Moisture Repel/Lube Cling® PVC Insulation Tape Tools

Ideal for cleaning flux residue Moisture displacing fluid penetrates Heat resistant 6
from recently soldered PCB's and & lubricates all mechanical & 20m x 18mm lead
electronic components. Suitable electrical equipment. Protects free tape. Cling®
for use with leaded and lead-free against high humidity. Conforms to brand.
soldering processes. Formulated MIL-C-161730 Grade 3 & ASTM-D-
to clean rosin, non-rosin, no clean 1748 humidity cabinet (26 days). Price Each RRP 4+ 10+
fluxes and ionic contamination. 250ml 175g.
Evaporates quickly leaving no T 3000A Blue 1.95 1.75 1.55
residue. 300gm aerosol. T 3001A Black 1.95 1.75 1.55
T 3002A Red 1.95 1.75 1.55
Price Each RRP 4+ 12+ T 3003A White 1.95 1.75 1.55
T 3041 9.95 9.10 8.50 T 2990 10 x 20m rolls assorted 19.95 19.25 18.95

Price Each RRP 4+ 12+ Duct Tape
T 3140 11.95 11.20 10.50
High quality duct tape for seal-
Chemtools® Ultrasonic Wash Gaffa Tape ing and joining parts. Very
strong & sticky. Also great for
A blend of biodegradable Tough and sticky, it is the tape automotive use. 48mm wide.
solvents and detergents in of a thousand uses! Use it to
water, formulated to remove tape down leads at concerts
flux residues and greases. or temporarily repair all sorts
Ideal for use in ultrasonic of equipment. Tears easily in
cleaners, but may also be one direction. 48mm wide.
used for manual cleaning &
soaking. 1 litre bottle. Price Each RRP 6+ 12+
T 2955 Silver 30m 4.75 4.35 3.95

Price Each RRP 4+ 12+ Price Each RRP 4+ 10+ High Temperature Polymide Tape
T 3180 12.95 12.45 11.90
T 2958A 10m 8.50 8.10 7.75 Offers high heat
T 2959A 20m 15.75 14.95 14.00 resistance and excellent
T 2960A 40m 27.95 25.95 25.10 dielectric strength. The
tape removes cleanly
Silicon Grease Compound Self Fusing Silicon SupatapeTM without leaving a residue.
Ideal for use in electrical
General purpose silicon spray for A self fusing silicon insulation or masking
lubrication and preservation. Ideal wrapping developed by circuit boards during wave
for restoring worn rubber parts. the military as a ‘do-it- soldering. 33m rolls.
Also provides lubrication for all’ insulating and water-
moving parts such as plastic proofing tape. Insulates new Typical applications • Magnet wire and cable • Slot
gears. Excellent moisture to 8000V per layer. Air- liner insulation • lnterlayer insulation in motors and trans-
repellent qualities. Two way spray tight and water-tight. formers • Flexible PCB's • Solder masking.
nozzle. 300g. -50°C to 260°C.
25mm wide. 3m length. Price Each RRP 4+

Price Each RRP 4+ Price Each RRP 4+ 10+ T 2971 8mm 10.50 9.75
T 3120 9.95 8.95 T 2964 3m 11.95 11.45 10.75 T 2973 12mm 12.95 12.25
T 2974 16mm 14.25 13.45
T 2975 24mm 18.50 17.25

Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au

184 Technology & Data All prices shown are RRP inc. GST.

Networking & Media Players 300Mbps Wireless N Modem Router

Digital TV Dongle For Android Phones Noontec® HD Media Player 3 year
new new warranty

Under 25mm long with This compact media player can be fitted with a 3.5” ADSL2+ modem, NAT router, switch and 300Mbps
plug in loop aerial. hard drive up to 4TB in size and plays back all com- wireless access point in the one device. With high
mon formats of video, music and photo files. It can speed 802.11n wireless connectivity plus 4 wired
A great way to watch free to air TV stations without store more than 1000 movies, 240,000 songs or ethernet ports. Built-in NAT, DHCP server, firewall,
any internet 3G/4G connection required! Watch TV 500,000 digital photos. Supports up to 1080p Full HD parental control, DMZ hosts, Virtual servers - all easy
whilst out and about. Simply plugs into your micro output. Easy to connect to other USB storage media to configure via web browser. USB port allows sharing
USB charging port and provides the ability to pause for file playback. See page 192 for hard drives to suit. of printers or storage devices across your network.
live TV, timeshift and PVR program recording. Works Plugpack and external splitter included.
with PadTV app on the Google Play store.

Features • DVB-t compliant TV receiver • Works with Features • SATA support for hard drives up to 4TB ca-
USB OTG equipped Android phones and tablets • Pause, pacity• 1080P HDMI output • SD/MMC 2 in one card
record and timeshift viewing - full PVR functionality in your reader • USB 2.0 host port • Includes HDMI lead
phone! • No 3G/4G data usage • Includes loop aerial, • H.264 MP4 & MKV support
magnetic base antenna & PAL adaptor.

Price Each RRP 2+ 4+ Price Each RRP Price Each RRP
D 2800 69.95 62.95 55.95 D 5572A V7IIS 99.95 D 4259 802.11n (TD-W8968) 72.00

Quad Core Android 4.2 TV Dongle Wireless N Gigabit Modem Router Basic Modem Router

Technology & Data 3 year 3 year
warranty warranty

new

This tiny HDMI TV stick turns a regular TV into an ADSL2+ modem, gigabit (1000Mbps) router, switch A high performance modem router that provides a full
Android powered multifunction Smart TV. Utilising and 300Mbps wireless access point in the one device. rate of ADSL2+. It is a 2-in-1 device combining a high-
Android OS 4.2 a massive array of apps and features With high speed 802.11n wireless connectivity plus 4 speed DSL modem and a one-Port 10/100Mbps NAT
are available to download from the Google Play store. wired ethernet ports. Built-in NAT, DHCP server, router. Plugpack and external splitter included.
firewall, parental control, DMZ hosts, Virtual servers -
7 The internal 1.8GHz RK3188 Quad Core processor, all easy to configure via web browser. Two USB ports Price Each RRP
allows sharing of printers or storage devices across D 4253 TD-8817 35.00
1GB of DDR3 RAM and 802.11n wireless stream and your network. Plugpack and external splitter included.
decode 1080p HD video. Combines the functions of D 4257: Adds simultaneous 2.4GHz 300Mbps and Portable 3G/4G Wireless N Router
many devices into one - not only is it a HD and IPTV 5GHz 300Mbps wireless for higher bandwidth use
on demand player, but it can perform any function the such as gaming or HD video streaming. 3 year
typical smartphone provides, such as gaming, photo warranty
slideshows, eBooks, music playback etc.

Features • Android OS 4.2 • 1GB of RAM • 1.8GHz Price Each RRP By connecting a 3G/4G USB modem to this compact
RK3188 Quad Core processor • DLNA server • Google box you can create an instant shareable 150Mbps wi-
Play store compatible • HDMI 1.4 digital audio & video D 4256 802.11n (TD-W8970) 129.95 fi hotspot. Ideal for travelling where open wi-fi cover-
output • Chrome support • 1080p HD video • 802.11n D 4257 802.11n Dual Band (TD-W8980) 155.00 age may not be available in your area. Can be
wireless • USB input for storage or peripheral connection powered directly from your laptop’s USB port. Com-
• USB on-the-go • 4GB internal memory • Micro SD Wireless AC Gigabit Modem Router patible with a majority of 3G/4G USB modems.
card - up to 32GB storage.

Price Each RRP 2+ 4+
D 2811 159.00 145.00 129.00

3 year new Price Each RRP
warranty D 4290 (TL-MR3020) 49.00

Noontec® ‘Movie Dock’ Media Player 3G/4G Wireless N Router
new

ADSL2+ modem combined with the next generation of 3 year
wireless routers utilising the 802.11ac standard warranty
providing up to 3 times the speed of 802.11n.
View your favourite pictures, audio and video files Simultaneous dual band provides the ultimate A compact 300Mbps wireless base station for your
from an external storage device or memory card to a performance for multi-user HD video streaming, home or office. Designed to share a 3G/4G USB
connected flatscreen TV. Decodes all major audio and gaming and more! Four gigabit ethernet ports are modem across multiple wireless enabled devices.
video file formats. 1080p HDMI output. USB 2.0 host provided for wired devices. Dual USB ports allow Simply plug in a USB 3G/4G modem for an instant
allows connection to hard drives (up to 3TB). sharing of printers or storage devices across your wi-fi hotspot. Plugpack included.
network. Plugpack included.
Features • USB 2.0 host • 1080p HDMI output D 4288: 2.4GHz 300Mbps / 5GHz 867Mbps.
• H.264 MKV & MP4 support • MP3 WMA support D 4287: 2.4GHz 300Mbps / 5GHz 1300Mbps.
• JPG BMP PNG support • SD card slot • Includes HDMI
lead. Price Each RRP

Price Each RRP D 4288 802.11ac (TL-ARCHERD5) 175.00 Price Each RRP
D 5574A A3IIS 86.50 D 4287 802.11ac (TL-ARCHERD7) 222.00 D 4265 (TL-MR3420) 63.00

www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999

All prices shown are RRP inc. GST. Technology & Data 185

150Mbps Wireless N Router Networking

3 year AC1750 Wireless Dual Band Router Wireless AC USB Adapter
warranty
3 year new 3 year
warranty warranty

new

D 4285 A USB wireless adaptor using the latest 802.11ac,
providing up to 3 times the speed of 802.11n! A great
way to upgrade your devices on an 802.11ac
compatible wireless network. Dual band, USB 3.0.

Wireless ethernet router with 150Mbps and The next generation of wireless routers utilising the Price Each RRP
802.11b/g/n compatibility. Provides input connection 802.11ac standard providing up to 3 times the speed D 4282 (TL-ARCHERT4U) 69.00
for your ADSL modem plus 4 wired ethernet ports. of 802.11n. Simultaneous dual band provides the
Built-in NAT, DHCP server, firewall, access control - all ultimate performance for multi-user HD video Wireless N USB Adapters
easy to configure via web browser. Can serve as a nor- streaming, gaming and more! Four gigabit ethernet
mal wireless router or an access point. Detachable re- ports are provided for wired devices. USB port allows 3 year
verse SMA connector antennas for remote mounting. sharing of printers or storage devices across your warranty
Plugpack included. network. Plugpack included.
D 4283: 2.4GHz 300Mbps / 5GHz 433Mbps.
Price Each RRP D 4284: 2.4GHz 300Mbps / 5GHz 867Mbps.
D 4245A 150Mbps 802.11n (TL-WR743ND) 49.95 D 4285: 2.4GHz 300Mbps / 5GHz 1300Mbps.

300Mbps Wireless N Router Price Each RRP Adds high speed 300Mbps 802.11n wireless to Technology & Data
compatible devices such as media players, laptops,
3 year D 4283 802.11ac 433Mbps (TL-ARCHERC2) 95.00 NAS devices. Dual band model offers better high
warranty D 4284 802.11ac 867Mbps (TL-ARCHERC5) 149.00 speed performance for streaming HD video.
D 4285 802.11ac 1300Mbps (TL-ARCHERC7) 199.00
Price Each RRP

D 0376 300Mbps (TL-WN821N) 24.00
D 0378 Dual band 300Mbps (TL-WDN3200) 41.00

150Mbps Wireless N Access Point Wireless Range Extenders

3 year
warranty

3 year
warranty

Wireless ethernet switch with 802.11n 300Mbps com- 7
patibility. Provides input connection for your ADSL
modem plus 4 wired ethernet ports. Featuring TP- This wireless access point is designed to establish or Operates as a relay station between your existing
Link®’s eXtended Range technology for wireless ac- expand a scalable high-speed wireless lite-N network. wireless access point & your laptop or wi-fi equipped
cess up to 200m away with WEP/WPA encryption. Ideal for connecting multiple ethernet enabled devices device. It repeats the data signal, extending coverage
Built-in NAT, DHCP server, firewall, access control, such as game consoles, digital media adapters, to previously unreachable or hard to wire areas.
DMZ hosts, Virtual servers - all easy to configure via printers, or network attached storage devices to a
web browser. Detachable reverse SMA connector an- wireless network. Plugpack included.
tennas for remote mounting. Plugpack included.

Price Each RRP
D 4264 300Mbps 802.11n (TL-WR941ND) 74.00

Wireless Dual Band N Gigabit Router Price Each RRP Price Each RRP

3 year D 4280 150Mbps 802.11n (TL-WA701ND) 39.95 D 4242 150Mbps (TL-WA730RE) 45.00
warranty D 4243 300Mbps (TL-WA830RE) new 62.00

Ethernet Over Power Kits

Ethernet Over Power Wireless Extender

3 year
warranty

new

Simultaneous 2.4GHz 300Mbps and 5GHz 450Mbps 3 year new
wireless connection with five gigabit ethernet ports warranty
and USB device sharing. 5GHz connection is ideal for
streaming HD video and gaming, whilst simultaneous This device transforms your homes existing electrical A transmitter and receiver kit designed to extend your
2.4GHz band is reserved for lighter web browsing cabling into an ethernet network. Extend your broad- wireless network to another room - ideal for large or
tasks. Dual USB ports allow sharing of printers or band connection to an electrical outlet in another double story homes where wireless coverage can be
storage devices across your network. In-built media room without new cabling. Simply connect to your problematic. Dual ethernet ports provided on receiver.
server connects to your existing devices such as Xbox router and plug it into a power outlet. Plug in the other Wi-Fi clone button recreates your wi-fi network in the
or Playstation. Plugpack included. adaptor & press ‘pair’ button. Range 300m. new room. Range up to 300m. 300Mbps max..

Price Each RRP Price Per Pair RRP Price Each RRP
D 4275 802.11n (TL-WDR4300) 135.00 D 4235 TP-Link TL-WPA4220Kit 169.00
D 4222B 200Mbps TL-PA211-KIT (pair) 79.00
D 4221 500Mbps TL-PA411-KIT (pair) 92.00

Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au

186 Technology & Data All prices shown are RRP inc. GST.

Networking

300Mbps Wireless Range Extender 10/100Mbps Ethernet Switches 2.4GHz 12dBi Wireless Access Point

This simple plug in unit 3 year This access point is dedicated
operates as a relay station warranty to long distance wireless net-
between your existing work solutions and will act as
wireless access point & your D 4185 a router or repeater. The
wi-fi equipped device. It 12dBi antenna provides long
repeats the data signal, D 4188 range solutions up to 15km. It
extending coverage to is perfect for internet sharing,
unreachable or hard to wire 3 year new being used as a wireless ISP
areas. A build in ethernet warranty router, or for long range CCTV
port also allows you to surveillance when used with
convert any wired ethernet an IP camera. 3 year warranty.
device into a wireless device. Dimensions: 265 x 120 x
83mm.
D 4189
Price Each RRP Features • Operates as client router, AP mode or WDS
D 4232 300Mbps 802.11n (TL-WA850RE) 59.95 16 & 24 port models are housed in a metal case bridge/repeater • Weatherproof • Lighting protect ground-
which can be desk or rack mounted (ears supplied). ing terminal • Power over ethernet injector • Reverse
Power Over Ethernet Injector Plugpack included. SMA connection

3 year Price Each RRP Price Each RRP
warranty S 9742A TL-WA5210G 88.00
D 4185 8 Port (TL-SF1008D) 19.95
D 4188 16 Port (TL-SF1016) 64.00
D 4189 24 Port (TL-SF1024) 79.95

new Gigabit Ethernet Switches 5GHz 15dBi Wireless Access Point

Technology & Data This handy PoE adaptor allows you to convert an exist- 3 year D 4192 This high performance
ing data only cable into a power & data cable run. warranty directional wireless antenna is
This allows you to power 802.3af compliant devices suitable for 5GHz networks.
such as IP cameras, IP telephony and wireless APs. Fitted with N type connector.
Provides 15W over 100m. Featuring a revolutionary 4
high gain antenna design and
Price Per Pair RRP D 4195 weatherproof enclosure for
D 4229 TP-Link TL-POE150S 29.95 outdoor pole mounting. 3 year
warranty. Dimensions: 250 x
85 x 60mm. 15dBi.

Power Over Ethernet Adaptor

D 4196 Features • Operates as client router, AP mode or WDS
bridge/repeater • Traffic shaping and quality of service
7 3 year 16 & 24 port models are housed in a metal case options • Weatherproof • External signal strength meter
warranty which can be desk or rack mounted (ears supplied). • Power over ethernet injector • Ethernet LAN connection
Plugpack included.

Price Each RRP Price Each RRP
S 9744B TL-WA7510N 139.00
D 4191 5 Port (TL-SG1005D) 29.00
D 4192 8 Port (TL-SG1008D) 41.00 2.4GHz 8dBi Wireless Antenna
D 4195 16 Port (TL-SG1016) 165.00
D 4196 24 Port (TL-SG1024) 198.00 For use with wireless
routers, access points
Designed to deliver both power and data over a single 2.4GHz 9dBi Wireless Antenna etc. Reverse SMA
ethernet cable to a device up to 100m away. Uses an connection. 8dBi
injector which runs power and data into a single cable For use with wireless omnidirectional type. 1W
whilst the receiving splitter separates the power and routers, access points etc. max output. Increases
data back into two cables to be used by the device. Reverse SMA connection. data transmission range
This allows users to place devices such as access 9dBi directional Yagi type. and improves signal
points, IP cameras, or VoIP phones anywhere that Suitable for outdoor quality. 1.3m lead with
they are best suited, regardless of power availability. mounting. Allows increased magnetic base. 3 year
transmission range & im- warranty.
Price Per Pair RRP proves signal quality. 1m
D 4228 TP-Link TL-POE200 36.00 lead. 3 year warranty.

PoE 1000Mbps Switches Price Each
D 4300 (TL-ANT2409A)
3 year RRP Price Each RRP
warranty 42.00 D 4298 (TL-ANT2408C) 19.95

D 4212

2.4GHz 14dBi Wireless Antenna LED Torch Bluetooth Speaker Combo

new D 4216 Provides extended point to
point connection
Designed to deliver both power and ethernet or added indoor and out- new
connection to IEEE 802.3af compliant Powered door area coverage. Re-
Devices (PDs). Ideal for distributing to IP base camera verse SMA connection A powerful 1W LED torch and Bluetooth 3.0 streaming
systems, custom control plates and wireless APs. hooks up to most wireless speaker. Perfect for the comuting cyclist. Features an
D 4212 Equipped with 4 PoE ports. routers with removeable in-built battery and charges via USB. 6-8hrs play time.
D 4216 Equipped with 24 PoE ports. aerials. 14dBi directional. Includes strap for handlebar mounting.
1m lead. 3 year warranty.
Price Each RRP RRP Price Each RRP 2+ 4+
Price Each 109.00 X 5100 79.95 72.00 64.00
D 4212 8 Port (TL-SG1008P) 149.00 D 4305 (TL-ANT2414A)
D 4216 24 Port (TL-SG3424P) 875.00

www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999

All prices shown are RRP inc. GST. Technology & Data 187

Bluetooth® NFC Ball Speaker System Bluetooth Speakers & USB Power

AVLabs® 2.1 Desktop Sound System Powertran® 4 Port USB Travel Adaptor
new

new

With in-built new
mic and phone

functions.

Utilises the latest Bluetooth 4.0 for increased range This computer audio system delivers quality stereo A four outlet USB adaptor with high current output
and performance, plus quick NFC device pairing with sound at an extremely affordable price. Features (2.1A) for faster charging than standard USB adap-
your smartphone or tablet. Provides surprisingly good wired remote control for convenient desktop access to tors. Max 2.1A current shared between all USB out-
audio performance from its 40mm compact speaker volume, mic and headphone connections. 18 Watts puts. Suitable for powering or charging portable
and tuned enclosure. Compact design is great for RMS. Subwoofer size: 150W x 200H x 200Dmm. devices including smartphones, tablets & MP3 play-
taking wherever you go. Microphone and phone ers. USB A type output connector. Includes ‘clip on’
functions allows hands-free phone calls. In-built Price Each RRP 4+ adaptors to suit Australian, US, UK and European
800mAh lithium battery provides several hours music D 0814 AVL311A 39.95 37.95 mains sockets. 100-240V ac input.
playback time. Size: 75mmØ.
Price Each RRP 2+ 4+
Price Each RRP 2+ 4+ AVLabs® USB Stereo Desktop Speakers A 0309A 2.1A 28.50 25.65 22.80
D 2036 54.95 50.00 45.00

Bluetooth® NFC Speaker System High Current Mains USB Adaptor

new A dual outlet USB adaptor Technology & Data
with 240V GPO with high
With in-built new These attractive stylish USB speakers will compliment current output (3.5A) for
mic and phone your desktop and provide you with surprisingly good faster charging than standard
sound reproduction for their compact size. USB USB adaptors. Max 3.5A
functions. connection with headphone output on front. current shared between both
USB outputs. Suitable for
charging two smartphones or
tablets at once.

Utilises the latest Bluetooth 4.0 for increased range Price Each RRP 4+ Price Each RRP 2+ 4+
and performance, plus quick NFC device pairing with D 0806A 14.95 13.95 M 8893 3A 24.50 22.50 19.75
your smartphone or tablet. Provides surprisingly good
audio performance from its 35mm compact speaker Mini ‘Pop-Up’ Portable Speaker System High Current Mains USB Double Adaptor 7
and tuned enclosure. Compact design is great for
taking wherever you go. Microphone and phone Daisy-chain A dual outlet USB
functions allows hands-free phone calls. In-built multiple speakers adaptor with dual
800mAh lithium battery provides several hours music 240V GPOs with high
playback time. Fitted with aux 3.5mm input and SD together! current output (3.5A)
card slot. Size: 62W x 62D x 65Hmm. for faster charging
new than standard USB
Price Each RRP 2+ 4+ adaptors. Max 3.5A
D 2037 34.95 31.50 28.00 A compact 40mm speaker driver with a tuned popup current shared
enclosure and inbuilt lithium-ion battery for up to 4 between both USB
Dynalink® Pocket Jukebox & Battery Bank hours of music listening. Surprisingly good sound outputs. new
from such a tiny unit - great for listening to tunes at
your desk or out and about. Recharges via USB. Price Each RRP 2+ 4+
3.5mm audio jack connection. 42W x 42L x 65Hmm M 8894 3.5A 29.50 26.95 23.50

Price Each RRP 2+ 4+ HPM® 4.2A USB Charger
D 2034 24.95 23.95 22.95

new AVLabs® 2.1 Desktop Sound System
new

new

This product is the ingenious combination of a High current USB charging with two 2.1A outlets en-
wireless bluetooth speaker/hands free phone device, abling two tablets to be charged simultaneously. Per-
a battery backup charger, FM radio and MicroSD card fect for the bedside table or desk. Includes 1.5m
music player. The audio quality is sensational mains lead. 4.2A total output.
considering it's size with dual 3W speakers. Operation
is made easier with helpful voice prompts, we even A premium quality desktop sound system for music Price Each RRP
customised the voice so that it sounded Australian! and gaming. Features wired remote control for M 8885 4.2A 29.95
The in-built 2200mAh lithium ion battery pack works convenient desktop connection to headphones/MP3
great as a backup power source for your phone when player. The 5.25” subwoofer and tuned cabinet www.altronics.com.au
you are on the road and away from mains power. produce excellent bass performance.
Dimensions: 70W x 125L x 27Hmm. Online ordering, 24/7, 365 days a year.

Price Each RRP 2+ 4+ Price Each RRP
D 2030 74.95 67.50 60.00 D 0817 AVL323ID 69.95

Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au

188 Technology & Data All prices shown are RRP inc. GST.

USB Power & Laptop Supplies 6A (100W) Laptop Power Supply

Universal 3 Coil Wireless Qi Charging Pad Car Power Adaptor With USB

new new

Utilises 3 charging coils for superior charging Plugs into your car cigarette lighter socket for Designed specifically for powering laptops. 240V ac
performance (some models on the market only use powering portable appliances. Just the shot for input voltage. Dual auxiliary USB outputs (5V 1.5A
one coil, which reduces the reliability of connection). portable radios, digital cameras, TVs, CD players, max). Supplied with 8 dc adaptors to suit HP/Com-
Transfers 5V, 1.5A charge current without the need to iPods, electronic games etc. Includes seven reversible paq, Dell, Toshiba, IBM, Asus, Fujitsu, Sharp, NEC and
plug in your phone - simply place it on the charging tips to suit most common appliances plus USB Type Acer. Size: 130 x 56 x 31mm. Energy authority ap-
pad. Operates with smartphones fitted with QI A. Regulated voltage settings 3, 4.5, 5, 6, 7.5, 8.4, 9V proved. 100W continuous, 120W short term use.
charging cases or some newer phones equipped with and 12V dc. 1.8A regulated.
wireless charging on board (See www.qinside.biz for 15V 16V 18V 19V 20V 24V
full compatibility list.) M 8996 6A 6A 5A 5A 5A 4.2A

Price Each RRP 2+ 4+ Price Each RRP 2+ 4+ Price Each RRP 2+ 4+
D 2325 69.95 63.00 56.00 M 8620B 29.95 27.95 25.95 M 8996 79.95 72.00 69.00

Dual Car Power Adaptor With USB 5.4A (75W) Laptop Power Supply

This dual car accessory 6A (90W) Car/240V Laptop Power Supply
socket with USB outlets is
Technology & Data designed to fit into your Designed specifically for powering laptops. 240V ac LCD readout indicates
cars cup holder. Provides input voltage. Fitted with auxiliary USB output (5V voltage selected.
power outlets for additional 1.5A max). Includes 6 dc adaptors to suit HP/Com-
devices such as GPS, plus paq, Dell, Toshiba, IBM, Asus, Fujitsu, Sharp, NEC and
two USB charging outlets Acer. Size: 130 x 56 x 31mm. Energy authority ap-
for your phone, iPod or proved. 75W continuous, 90W short term use.
portable gaming device. 5V
0.7A USB output.

Price Each RRP 2+ 4+
M 8622 17.95 16.50 15.00

7 Car 4.8A 5V DC Dual USB Adaptor 12V 15V 16V 18V 19V 20V A laptop power supply designed for both 240V mains
M 8992 5.4A 4.7A 4.4A 3.9A 3.7A 3.5A and portable 12V use. Includes car power adaptor,
mains lead and 12 tips to suit popular models of lap-
Price Each RRP 2+ 4+ top. These include HP/Compaq, Sony, Dell, Toshiba,
M 8992 57.95 53.00 48.00 IBM, Lenovo, Samsung, Fujitsu and Acer. Voltage out-
put is set automatically when different tips are plugged
new in. Size: 130 x 56 x 31mm. Energy authority ap-
proved. Voltages available: 14.5, 15, 16, 16.5, 18.5,
Huge 4.8A current output is ideal for charging two 8.5A (144W) Laptop Power Supply 19, 19.5, 20, 24V output at maximum of 90W.
tablets simultaneously. 12-24V input. Inbuilt LED
power indicator.

Price Each RRP 3+ 6+ Price Each RRP 2+ 4+
M 8625 19.95 17.70 15.70 M 8990 99.95 89.95 79.95

Car 3.1A 5V DC Triple USB Adaptor 6A Car Laptop Power Supply

new LED readout Designed for powering laptops. 240V ac input voltage.
displays battery Auxiliary USB output 5V 500mA max. Supplied with 9
voltage & charge dc adaptors to suit HP/Compaq, Dell, Toshiba, IBM,
Asus, Fujitsu, Sharp, NEC and Acer. Dimensions: 180
current. x 63 x 40mm. Energy authority approved.

Allows you to charge up USB devices in your car. 12-16V 18V 18.5-19V 19.5-20V 22V 24V
Great for iPads & smartphones. Max current 3.1A.
12-24V input. Inbuilt LED car battery level readout. M 8998 8.5A 7.7A 7.25A 7A 6.5A 6A

Price Each RRP 3+ 6+ Price Each RRP 2+ 4+
M 8624 19.95 17.70 15.70 M 8998 109.00 99.00 89.00

Car 2.1A 5V DC Dual USB Adaptor i A compact switchmode power adaptor designed
specifically for powering laptop computers from a car
Allows you to power up Attention Bulk Buyers! accessory socket (cigarette lighter socket). 12V-14V dc
two USB devices in your input. Selectable output voltages 15, 16, 18.5, 19,
car. Great for iPods, For extremely competitive wholesale 19.5, 20 and 24V dc, fully regulated at up to 120W.
iPads, MP3 players etc. prices on the items in this catalogue, Supplied with 8 dc adaptors to suit: Compaq, Dell,
Max current output 2.1A. please contact our parent company Toshiba, IBM, Gateway, Sharp, Acer, Asus, NEC,
12-24V Input Altronic Distributors on 1300 780 999. Philips, Samsung, HP, Sony, Fujitsu, Panasonic.

Price Each RRP 2+ 4+ Price Each RRP 2+ 4+
M 8623A 9.95 9.25 8.70 M 8627A 55.00 49.00 44.30

www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999

All prices shown are RRP inc. GST. Technology & Data 189

Battery Banks / Microscopes / Headsets

Mobile Battery Bank 5600mAH 9 Megapixel USB Microscope Stereo Headset With Electret Mic

new new
new

Less than
9mm thick!

A high capacity, slimline, lithium-ion battery bank This high specification USB microscope offers up to Fitted with soft ear cushions and large diameter driv-
designed to keep your smartphone or tablet or 200x optical magnification ratio and a high quality 9 ers for deep bass and clear vocal reproduction mak-
handheld game console powered up whilst out and megapixel still photo capture (3488 x 2616 pixels). ing them ideal for gaming & Skype. The microphone
about! Great backup device for those times you’re Software allows you to make measurements on is attached to a flexible metal gooseneck making it
away from a mains plug. Two USB charging outputs screen with many measurement functions available. easy to position for optimum pickup and clarity. Light-
are provided at 5V 1A and 5V 2A. 5hr recharge time. Images can be annotated for later review. An excellent weight but robust design is ideal for schools or lan-
Includes micro USB to USB Type A lead for feature for science classes is the adjustable time guage labs. 3.5mm jack connections for mic &
recharging. Also features a handy LED torch light. lapse capture which allows students to view changes headphones (6.35mm adaptors included).
Dimensions: 130H x 80W x 9Dmm. over time. Light filter adjustment allows you to alter
the exposure, a great feature for reflective items. In-
Price Each RRP 2+ 4+ cludes adjustable stand and calibration sample.
D 0507 45.95 41.50 36.95

Mobile Battery Bank 3500mAH Price Each RRP 4+ 10+
new C 9028A 17.95 16.90 15.50

USB Stereo Headset

Features • Adjustable focus • Light level filter adjust- new Technology & Data
ment • Photo, video and time lapse capture (800x600
Less than video resolution - AVI format) • Calibration adjustment
8mm thick! • Add annotations to stored images • Length, angle,
polygon and circle diameter, radius measurement func-
A high capacity, slimline, lithium-ion battery bank tions • Windows XP/Vista/7/8 & OS X compatible
designed to keep your smartphone or tablet or
handheld game console powered up whilst out and Price Each RRP 2+ 4+
about! Great backup device for those times you’re
away from a mains plug. 5V 1A USB charging output. X 4304 169.00 155.00 139.00
4-5hr recharge time. Includes micro USB to USB Type X 4310 Desk stand with LED 55.00 49.50 44.55
A lead for recharging. Also features a handy LED torch
light. Dimensions: 110H x 62W x 8Dmm. USB Microscopes 7

Price Each RRP 2+ 4+ Lightweight USB headset. Gives a clear sound and a
D 0505 29.95 27.00 24.00 simple to use inline control lets you adjust volume or
mute the headset. Flexible boom microphone & 2m
IP67 Battery Bank 5600mAH A great connection lead. USB connection only. Great for
educational and Skype use.
visual aid, plus
its great fun for Price Each RRP 4+ 10+
C 9023 34.50 32.50 27.75
the kids!

new Plantronics® 326 Headset

A multi-function rugged, robust, water and dust proof Boasting up to 400x magnification these compact Designed for use in
mobile battery bank fitted with laser pointer and LED USB microscopes are ideal for a wide variety of appli- podcasting, SkypeTM, VoIP
torch. It’s designed to keep your smartphone powered cations including electronic inspection, education, gaming & conferencing.
up whilst out and about - water and dust protection medical etc. They can even be used as a visual aid Comfortable, lightweight
makes it ideal for tradies, camping & hiking. Great when reading small type. Provides live motion view on design with superb
backup device for those times you’re away from a screen via the inbuilt CMOS camera (video can be reproduction for music
mains plug. 5V, 1A output. Standard Type A USB captured via USB). In-built high power LEDs may be listening when required. 2 x
charge output. Micro USB charging input. LED battery switched on to boost image brightness. A wide focus 3.5mm connection.
level indicator in-built. range between 10 and 500mm ensures a clear, crisp
image every time. Price Each RRP
X 4300A: 200x zoom and 2 megapixel sensor. C 9026 Plantronics® 326 29.50
X 4301: 400x zoom and 1.3 megapixel sensor.
Price Each RRP 2+ 4+ Multimedia Stereo Headset
D 0508 64.95 58.50 52.00
A lightweight headset, ideal
Lost your manual or software? Features • Time stamping • Measurement function for VoIP, internet phone, etc.
• Adjustable brightness, contrast, hue, saturation, Featuring adjustable
No problem! For most products we sharpness, gamma, white balance & backlight headband and boom mic.
provide downloads directly from our • JPG/BMP capture • AVI video capture • Windows Supplied with a 1.8M lead
website for instruction manuals, XP/Vista/7/8 & OS X compatible fitted with 3.5mm stereo
software & firmware updates. jack plugs.

Price Each RRP 2+ 4+ Price Each RRP 4+ 10+
C 9020 10.45 9.40 8.35
X 4300A 200x 2mp 79.95 71.95 63.95
X 4301 400x 1.3mp 79.95 71.95 63.95
X 4310 Desk stand with LED 55.00 49.50 44.55

Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au

190 Technology & Data All prices shown are RRP inc. GST.

USB Accessories USB 2.0 4 Port External Hub

10 LED USB Gooseneck Lamp Desktop USB 3.0 Dual HDD Caddy

new

Features 10 high brightness white LEDs with a USB 2.0 compatible. Compact design allows up to 4
graduated dimmer function. One touch on/off setting devices to be connected. Suits devices such as print-
or touch and hold to dim up and down. Plug it into ers, scanners etc. No plugpack required. For high cur-
your laptop or run it off a USB adaptor in your car. rent devices, use M 8909A plugpack & M 9187 tip.
Ideal for DJ’s as an alternative to a mixing desk lamp.

Price Each RRP 2+ 4+ Take advantage of the latest high speed USB 3.0
D 0385 19.95 17.95 16.15 transfer rates with this dual 2.5/3.5” SATA hard disk
caddy. PC backups can be activated at the touch of a
USB Gooseneck Lamp button, using the included ‘PC Clone EX Lite’ Price Each RRP 4+
software. Ideal for IT technicians when recovering files D 2354A 16.95 15.50
from machines or uploading disk images. Allows “hot
A handy USB powered swapping” of drives without removing power from the Bluetooth® 4.0 Wireless Dongle
LED lamp for working in computer. Includes plugpack & USB 3.0 lead.
the dark. Plug it into your Add high performance
laptop or run it off a USB Note: Unit is not designed to ‘clone’ from one drive to another. Bluetooth 4.0 to a laptop,
adaptor in your car. Ideal media centre or smart de-
for DJ’s as a alternative Price Each RRP 2+ 4+ vice. Idea for connecting
to a mixing desk lamp. D 5508 59.00 57.00 53.00 peripherals, smartphones
All metal construction. and tablets for file transfer.
385mm long. Windows 8 compatible. new
20m range.
Price Each RRP 2+ 4+ USB 3.0 Card Reader
D 0384 9.95 8.95 7.95
Technology & Data Price Each RRP 4+ 10+
D 0382A 19.50 18.70 17.95

Desktop USB 3.0 HDD Caddy new Logitech® Wired Mouse

new

7 Designed to work with a huge range of memory cards A basic wired USB mouse with scroll wheel and
typically used in smartphones, digital cameras, game optical sensor for accurate tracking on most surfaces.
systems etc. USB 3.0 for high speed data transfer. Optical resolution (DPI) 1000dpi. Symetrical shape for
See website for full card compatability listing. No left & right handers. 113L x 62Wmm.
power required.

Take advantage of the latest high speed USB 3.0 Price Each RRP 4+ 10+
transfer rates with this 2.5/3.5” SATA hard disk D 0371A 29.95 26.95 23.95
caddy. PC backups can be activated at the touch of a
button, using the included ‘PC Clone EX Lite’ Price Each RRP
software. Ideal for IT technicians when recovering files D 2073 Logitech® M90 14.95
from machines or uploading disk images. Allows “hot
swapping” of drives without removing power from the USB 3.0 4 Port External Hub Rapoo® Slimline 2.4GHz Wireless Mouse
computer. Includes plugpack & USB 3.0 lead.
2 year
Price Each RRP 2+ 4+ warranty
D 5507 39.95 37.00 35.00

Tablet/Reader Desktop Stand

*iPad for illustration purposes. USB3.0 4.8Gbps high speed - ten times faster than A low profile 2.4GHz wireless mouse with touch scroll-
USB2.0. Compact design allows up to 4 devices to be ing technology. The touch sensitive area on the front
connected without plugs interfering with each other. of the mouse controls left and right clicks, vertical and
No plugpack required. Includes USB3.0 connection horizontal scrolling. Up to 3 month battery life from a
lead. For high current devices, use M 8909A plugpack single AA (included). 10m range. 59x114mm
& M 9187 tip.
Price Each RRP
Price Each RRP 4+ D 2087 Rapoo® T6 29.95
D 2355 39.95 37.40
Rapoo® 2.4GHz Wireless Mouse

?Lost your instructions 2 year new
warranty
or software?
Stylish aluminium construction with rubber standoffs. Economical wireless desktop mouse & USB receiver.
Use it on the coffee table for reading or watching No problem! For most products we Ambidextrous design suits left & right handers.
videos, or put it on the kitchen worktop for recipes. provide downloads directly from our 1000dpi optical sensor. Up to 9 month battery life
Universal design suits virtually any tablet screen larger website for instruction manuals, from a 1 AA (included). 10m range. 64x115mm.
than 9” such as iPad, Samsung Galaxy, HP Touchpad. software & firmware updates.
Also ideal for eBook readers such as Kobo & Sony
Reader.

Price Each RRP 3+ 6+ Price Each RRP 4+
H 8250 24.95 22.50 19.95 D 2083 Rapoo® 1620. 19.95 18.95

www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999

All prices shown are RRP inc. GST. Technology & Data 191

Keyboards & Mice

Rapoo® 5GHz Wireless Mouse 2.4GHz Keyboard With Trackpad Bluetooth Keyboard & Tablet Stand

2 year new
warranty

Folds flat for
convenient storage.

Operates on 5GHz for less interference with other pe- Compact wireless 2.4GHz keyboard with multimedia A universal Bluetooth tablet keyboard with in built
ripherals. Ambidextrous design suits left & right han- function keys and laptop style trackpad. Enjoy wireless stand. Offers the convenience of a keyboard for your
ders. 1000dpi optical sensor. Up to 9 month battery freedom up to 10m from your computer. Power save tablet when you need it - can be used without taking
life from a 1 AA (included). 10m range. 64x98mm. mode extends battery life. Size: 220 x 310 x 20mm. your tablet out of its case. Keyboard backing is con-
Includes 2 x AAA batteries. structed from aircraft grade aluminium and case is a
Price Each RRP 4+ combination of soft felt and hard wearing leather-look
D 2084 Rapoo® 1090P 22.95 21.95 outer. Folds flat for compact storage when travelling.
In-built lithium battery provides up to 1 month usage
Rapoo® 5GHz Wireless Mouse Price Each RRP time. Supports most tablet brands and operating sys-
D 2133 49.50 tems. Dimensions: 268L x 143W x 14Dmm.

2 year new
warranty
Keyboard & Trackpad Remote

Price Each RRP 2+ 4+
D 2135 74.95 67.45 60.70

A high resolution 1000dpi optical 6 key mouse using Rapoo® iPad Bluetooth Keyboard
5GHz wireless transmission for less interference with
other peripherals. Ambidextrous design suits left and Technology & Data
right handers. Up to 9 months standby time on 1 AA
battery (included). 10m range. 107 x 65mm.

Price Each RRP 4+ 2 year
D 2088 Rapoo® 7200P 39.95 36.95 warranty

Compact USB Keyboard An 8 in 1 universal remote on one side, a full qwerty Designed with the iPad® in mind (equipped with iPad®
keyboard & mouse trackpad on the other! Great for function hotkeys), this compact Bluetooth keyboard is
controlling your entire home theatre system, plus con- great for typing those long emails or work documents.
trol your laptop or hi-fi media centre. See page 2 for In-built rechargeable lithium battery for up to 1 month
full details. Requires 2xAAA batteries. usage time. 10m range via Bluetooth 3.0.
Dimensions: 82x206x5.8mm
Price Each RRP 7
A 1004 69.00

Compact keyboard, only 285mm wide, features 84 Price Each RRP
keys with the functionality of 104. It also has 10 D 2140 Rapoo® E6300 49.95
unique function keys to control special PC tasks. Fits
inside a standard 19” rack frame. USB with PS/2 Rapoo® Wireless Keyboard & Trackpad
adaptor. Compact 285W x 145D x 32H size.
Rapoo® Bluetooth Keyboard

new

Price Each RRP 4+ 2 year
D 2111 29.00 26.00 warranty

Economy USB Keyboard An ultra slimline 2.4GHz wireless keyboard with track- 2 year
pad built in. Ideal for surfing the net on your smart TV warranty
from the comfort of your couch. 10m range. Includes
2 x AAA batteries. Dimensions: 82 x 254 x 5.8mm. Designed for computers and tablets, this ultra-thin
wireless keyboard is a great option for those tight on
Price Each RRP desktop space. In-built rechargeable lithium battery
D 2142 Rapoo® E2700 59.95 for up to 1 month usage time. 10m range via Blue-
tooth 3.0. Dimensions: 110x288x5.6mm.

Standard keyboard layout. Wired USB 2.0 connection. Price Each RRP
Dimensions: 458 x 158 x 30mm. D 2141 Rapoo® E6100 39.95

Rapoo® Wireless Keyboard & Mouse

Price Each RRP 4+ HDMI USB 2 Port KVM Switcher
D 2107 13.95 12.95
Supports up to
Logitech® Wired USB Keyboard & Mouse 4K/2K resolutions
new
2 year
warranty new

Standard keyboard layout. Wired USB 2.0 connection. An ultra slimline 2.4GHz wireless keyboard with Features HDMI, speaker and dual USB peripheral
Optical scroll mouse. Logitech MK120. numpad, just 6mm thick! Combined with an er- ports switched to dual outputs. Select output via front
gonomic wireless optical mouse. Experience wireless panel button or keyboard hotkeys. Powered by USB
freedom on your desktop. 10m range. Includes lead (included). Supports 4K/2K resolutions.
2 x AAA batteries. Dimensions: 110x340x5.8mm.

Price Each RRP Price Each RRP Price Each RRP 2+ 4+
D 2155 29.95 D 2150 Rapoo® E9060 49.95 D 3096 2 Way 119.00 109.00 99.00

Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au

192 Technology & Data All prices shown are RRP inc. GST.

KVM & Memory Cards Sandisk® Secure Digital Ultra

Aten® KVM 2-Port Switcher Sandisk® Dual USB Drives Secure Digital® memory
cards for digital devices.
Class 10. 30mb/s.

new

Control two computers with a single keyboard, A unique double ended design which allows you to Price Each RRP
monitor & mouse. Switching between each computer plug your USB stick directly into micro USB equipped
is done via a remote switch which can be located on phones for file transfer. Then disconnect it and plug it DA0321 8GB 14.50
your desktop for easy access. straight into your computer! A quick way to transfer DA0322 16GB 24.95
large files off your phone or tablet. The ideal acces- DA0323 32GB 53.00
sory for OTG compatible Android powered phones. DA0324 64GB 94.50

Features • No power required • 90cm lead length Price Each RRP
• Filtered VGA cables • Max 2048 x 1536 resolution
D 0420 16GB 28.95
Price Each RRP D 0421 32GB 49.00 Sandisk® Secure Digital Extreme
D 1624 2 Way USB KVM 34.95 D 0422 64GB 78.95
Secure Digital® memory
VGA + Audio + USB 2 Way Switcher Sandisk® USB 2.0 Memory Sticks cards for high speed data
new transfer requirements in
modern digital devices.
Class 10. 45mb/s.

Technology & Data Rear Panel A great way to transfer work from office to home. Sim- Price Each RRP
ply plugs directly into any USB port for high speed
data storage. In most cases, requires no drivers. Sup- DA0300 8GB 20.95
ports Windows XP or higher and Mac OS 9.0 or DA0301 16GB 38.00
higher. DA0302 32GB 69.00
DA0303 64GB 129.00

Control two computers from a single keyboard, moni-

tor, mouse, speakers & microphone (via 3.5mm

jacks). Switching between each device is performed Price Each RRP Sandisk® Micro Secure Digital

by buttons on the front panel or by a combination of D 0401B 8GB 11.60 Micro Secure Digital®
D 0402B 16GB 19.95 memory cards for digital
keyboard keystrokes. An auto-scan mode enables cy- D 0403B 32GB 34.90 devices. Class 4.
D 0404B 64GB 69.95
cling between each output with 3, 8, 15 or 30 second Price Each
D 0327 8GB
intervals. Four USB inputs are provided for keyboard, D 0328 16GB
D 0329 32GB
7 mouse and other peripherals. No software or drivers Sandisk® Ultra USB 3.0 Memory Sticks RRP
required to operate. Resolution up to 1920 x 1200 /
11.70
1920 x 1140 (Includes power supply). 21.95
39.95
Price Each RRP 2+ 4+
A 3096 149.00 135.00 120.00

VGA 4 Way Switcher new

Supports USB high speed standard 3.0. RRP Sandisk® Ultra Micro Secure Digital
21.95
Price Each 39.95 Micro Ultra Secure Digital®
D 0390B 16GB 76.00 memory cards for high speed
D 0391B 32GB data transfer requirements in
D 0392B 64GB digital devices. Class 10.
Includes SD adaptor. 30mb/s
Switches 4 VGA sources between a single monitor. Sandisk® Wireless USB2.0 Memory Stick RRP
Ideal for training rooms and schools. Switch a presen- Price Each
tation projector between multiple laptops etc. High DA0327 8GB 14.25
density DE15 inputs & outputs. Power supply in- DA0328 16GB 25.50
cluded. Max resolution: 1920 x 1440. DA0329 32GB 54.95
DA0330 64GB 99.00

Price Each RRP 4+
D 1630 4 Way 59.00 56.00

new Sandisk® Extreme Micro Secure Digital

Hard Drives Creates its own wi-fi network for file sharing and in- Micro Extreme Secure
stantly adds 32GB of storage to your iPad, iPhone and Digital® memory cards for
new Android device. You can wirelessly connect up to 8 de- high speed data transfer re-
vices and stream media to as many as 3 devices si- quirements. Class 10. Includes
multaneously, without the need for an internet SD adaptor. 45mb/s new
connection. An internal battery recharges via USB for
up to 4 hrs use on a single charge. Price Each RRP

Price Each RRP DA0335 16GB 49.00
D 0430 32GB 128.00 DA0336 32GB 79.95
DA0337 64GB 149.00

SATA3/2 hard drives. RRP About Memory & Hard Disk Pricing

Price Each 105.00 Please check our website for up to date pricing on these items as pricing changes frequently.
D 5513A Seagate 3.5” SATA3/2 1Tb 7200RPM 149.00
D 5515 Seagate 3.5” SATA 2Tb 7200RPM 215.00
D 5517 Seagate 3.5” SATA 3Tb 7200RPM 88.00
D 5528 Hitachi 2.5” SATA 500Gb 5400RPM

www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999

All prices shown are RRP inc. GST. Technology & Data 193

USB1.1 Cat 5e/6 Extender USB Leads

Apple 30 Pin To Lightning Adaptor USB 3.0 Leads

Allows you to connect Apple LightningTM equipped de- Price Each RRP 2+ 4+
vices to 30 pin docks and accessories. Apple certified. Type A male to type A female 12.95 12.25 11.50
P 1958 2m 14.95 14.20 13.30
Allows you to operate USB peripherals over a distance Price Each RRP P 1959 3m
of 50m, overcoming the 5m length restriction of stan- D 2387 15cm 19.95 RRP 2+ 4+
dard USB leads. Ideal for operating a USB printer in Price Each 12.95 12.25 11.50
another office, or locating a keyboard & mouse away Apple Lightning Charge Lead Type A male to type A male 25.50 22.95 20.50
from a server rack. Simply connect standard Cat 5e/6 P 1956 2m
UTP cabling between the transmitter & receiver. No P 1957 5m RRP 2+ 4+
power required. USB1.1 12Mbit/s max. 12.95 12.25 11.50
Includes transmitter & receiver. Price Each
Type A male to type B male
Price Each RRP 2+ 4+ Replacement for the standard Apple LightningTM P 1962 2m
D 1634 29.95 27.00 24.00 charging lead. Apple certified.

USB2.0 Cat 5e/6 Extender Price Each RRP
D 2389 1m 19.95

Apple 30 Pin Charge Lead

new Replacement charging lead for Apple devices fitted Price Each RRP 2+ 4+ Technology & Data
with the 30 pin dock connector. Apple certified. Type A male to micro B male 13.95 13.15 12.15
Allows you to operate high speed USB peripherals P 1965 1m
over a distance of 100m, overcoming the 5m length Price Each RRP 7RRP 4+ 10+
restriction of standard USB leads. High speed USB2.0 D 2385 1.5m 30 pin dock. 19.95 USB 2.0 Leads
permits connection of hard drives - have full access to 5.50 4.95 4.40
your home theatre PVR hard drive from your study! 4 In 1 Charge Lead Price Each 7.50 6.75 6.00
Simply connect standard Cat 5e/6 UTP cabling be- Type A male to type A male 9.95 8.95 7.95
tween the transmitter & receiver. Requires power at P 1901A 1.5m
receiver end (plugpack included). USB2.0 480Mbit/s P 1904A 3m RRP 4+ 10+
max. Includes transmitter & receiver. P 1905 5m 5.50 4.95 4.40
7.50 6.75 6.00
Price Each RRP 2+ 4+ new Price Each 9.95 8.95 7.90
D 1635A 109.00 99.00 89.00 Type A male to type B male
Handy charge lead includes micro USB, Apple Light- P 1911A 1.5m RRP 4+ 10+
USB 3.0 Active Extension Cables ning, Apple 30-pin and Samsung tablet plugs. Apple P 1914A 3m 7.95 7.50 6.90
certified. P 1916 5m 11.50 10.30 9.10

Price Each RRP 4+ 10+ Price Each
D 2391 1m 18.95 17.95 16.95 Type A male to type A female
P 1942 2m
D 2337 USB Adaptors P 1945 5m

Achieve distances up to 10m with high speed P 1930 P 1932 10+
4.8Gbps USB3.0 connection. Ideal for connecting
USB3.0 peripherals such as external drives in server Price Each RRP 4+ 5.95
racks etc, where 3m USB3.0 leads may not be long P 1930 A Fem to B Male 6.95 6.50 5.95
enough. Powered via USB bus, no plugpack required. P 1932 A Fem to A Fem 6.95 6.50
For high current devices, D 2337 requires M 8909A
power supply fitted with M 8917 1.35mm tip.

Price Each RRP 4+ 10+ USB ‘On The Go’ Lead

D 2336 5m 34.95 31.45 27.90
D 2337 10m 89.95 81.00 72.00

USB 2.0 Active Extension Cables Price Each RRP 4+ 10+

Micro USB to USB ‘A’ female. Turns your mobile Type A male to mini male 8.95 8.45 7.50
phone into a USB host allowing you to directly plug in P 1891 1m 11.50 10.95 9.95
a USB flash drive, keyboard or mouse. P 1893 3m

Allows you to extend your USB cables beyond the 5m Price Each RRP 4+ 10+
limitation of pre-made leads. Can be daisy-chained to- P 1921 15cm 4.95 4.45 3.90
gether to form a single USB lead up to 50m long if re-
quired. Powered via USB bus, no plugpack required. Used for charging & sync on many smartphones.

Price Each RRP 4+ 10+ www.altronics.com.au Price Each RRP 4+ 10+

D 2342 10m 38.00 34.00 29.95 Online ordering, 24/7, 365 days a year. Type A male to micro male 5.50 4.95 4.40
D 2343 20m 49.95 44.90 39.90 P 1895 0.3m 9.50 8.55 7.60
P 1897 1.5m

Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au

194 Technology & Data All prices shown are RRP inc. GST.

Ethernet Leads & Accessories Cat 6/6a RJ45 Modular Patch Leads

RJ45 Wallplates & Jacks Cat 5 RJ45 Splitter

D 5100 Typically used in pairs at
each end of a cable run,
these adaptors enable Cat 6 new
two PCs to operate from
D 5102A one wall outlet. Must be Price Each RRP 4+ 10+
used in conjunction with
a network switch. P 1806B Blue 0.3m 2.95 2.70 2.40
Note: May not operate with P 1819B Red 0.3m 2.95 2.70 2.40
Gigabit networks. P 1829B Yellow 0.3m 2.95 2.70 2.40
P 1599B Black 0.3m 2.95 2.70 2.40
D 5113 Price Each RRP 4+ 10+ P 1839B Green 0.3m 2.95 2.70 2.40
P 1807B Blue 0.5m 3.20 2.85 2.50
Keystone® connectors for telephone and computer D 5107 RJ45 plug to 2 x RJ45 skt 14.95 13.95 12.95 P 1820B Red 0.5m 3.20 2.85 2.50
use. Wall plates include connectors. Dimensions: P 1830B Yellow 0.5m 3.20 2.85 2.50
70W x 115H. Cat 5 models are ACMA approved. ADSL 2+ Filters P 1600B Black 0.5m 3.20 2.85 2.50
P 1840B Green 0.5m 3.20 2.85 2.50
Price Each RRP 5+ 10+ P 7153A P 1808B Blue 1m 3.95 3.45 3.15
7.95 6.95 6.50 P 1821B Red 1m 3.95 3.45 3.15
Cat 5 12.60 11.35 10.10 P 7151A P 1831B Yellow 1m 3.95 3.45 3.15
D 5100 Jack to suit Clipsal® 21.95 19.75 17.55 P 1601B Black 1m 3.95 3.45 3.15
Cat 5e Wallplates 8.95 7.95 6.90 Line filters are required to use devices such as tele- P 1841B Green 1m 3.95 3.45 3.15
D 5113 Single phones, faxes & answering machines on the same P 1809B Blue 2m 5.20 4.60 4.10
D 5114 Dual phone line with an ADSL modem. ACMA approved. P 1822B Red 2m 5.20 4.60 4.10
Cat 6 P 7151A Filter: RJ12 line & phone connections. P 1832B Yellow 2m 5.20 4.60 4.10
D 5102A Jack to suit Clipsal® P 7153A Splitter/filter: RJ12 line and phone con- P 1602B Black 2m 5.20 4.60 4.10
nections, RJ12 ADSL 2+ modem connection. P 1842B Green 2m 5.20 4.60 4.10
RJ45 Surface Mount Boxes P 7155A Central filter: Line, modem & phone RJ12 P 1811B Blue 3m 6.95 6.25 5.50
sockets, plus hardwire terminals. P 1823B Red 3m 6.95 6.25 5.50
Technology & Data P 1833B Yellow 3m 6.95 6.25 5.50
D 5117A D 5118 Price Each RRP 4+ P 1603B Black 3m 6.95 6.25 5.50
P 1843B Green 3m 6.95 6.25 5.50
Supplied complete with connectors. ACA approved. P 7151A Filter 10.95 9.95 P 1812B Blue 5m 8.95 7.95 6.95
D 5118 includes handy label plates. P 7153A Splitter Filter 14.95 13.75 P 1825B Red 5m 8.95 7.95 6.95
P 7155A Central Filter 18.95 17.50 P 1835B Yellow 5m 8.95 7.95 6.95
P 1605B Black 5m 8.95 7.95 6.95
Price Per RRP 5+ 10+ Modular RJ45 Socket Plug P 1844B Green 5m 8.95 7.95 6.95
P 1607B Black 10m 14.90 13.35 11.70
7 D 5117A Cat 5e Single 9.15 8.65 7.95 This rubber push-in plug P 1815B Blue 10m 14.90 13.35 11.70
D 5118 Cat 5e Dual 11.50 10.95 10.35 simply fits into an RJ45 socket P 1608B Black 15m 18.95 17.50 16.00
preventing dust ingress. P 1609B Black 20m 24.95 22.35 19.70
P 1610B Black 30m 34.95 32.95 30.45
Modular Patch Lead Caps Price Each RRP 25+ 50+ P 1846* Crossover Red 2m 5.95 4.95 4.50
D 5040 0.50 0.45 0.40
Identify your leads easily. *Cat5e rated.

Red Pk 10 Pk 100 RJ45 ‘Back To Back’ Mechanisms Cat 6a new
Yellow P 1850A P 1851A
Blue P 1855A P 1856A Double sided pluggable design. Price Each Blue 0.3m RRP 4+ 10+
Grey P 1860A P 1861A 8P8C socket. Suits Clipsal® Red 0.3m
P 1865A P 1866A wallplates. P 1629A Yellow 0.3m 3.75 3.40 3.00
P 1641A Black 0.3m 3.75 3.40 3.00
Price Per Pk RRP 4+ 10+ Price Each RRP 10+ P 1651A Green 0.3m 3.75 3.40 3.00
P 1659A Blue 0.5m 3.75 3.40 3.00
Pk 10 4.95 4.45 4.15 P 7950 Cat5e 7.50 6.70 P 1669A Red 0.5m 3.75 3.40 3.00
Pk 100 29.95 26.95 23.95 P 7952 Cat6 8.95 8.00 P 1630A Yellow 0.5m 3.95 3.50 3.15
P 1642A Black 0.5m 3.95 3.50 3.15
19" 24 Port RJ45 Patch Panel P 1652A Green 0.5m 3.95 3.50 3.15
P 1660A Blue 1m 3.95 3.50 3.15
This 1RU panel is fitted with 24 RJ45 Keystone jack RJ45 Mechanisms new P 1670A Red 1m 3.95 3.50 3.15
ports and features numbered outlets for easy P 1631A Yellow 1m 4.95 4.45 4.00
identification. Black finish. Includes rear cable All feature punchdown termi- RRP 10+ P 1643A Black 1m 4.95 4.45 4.00
support bar. nals on rear for connection. P 1653A Green 1m 4.95 4.45 4.00
8P8C socket. Suits Clipsal® P 1661A Blue 2m 4.95 4.45 4.00
Price Each RRP 4+ 10+ wallplates. 12.25 11.55 P 1671A Red 2m 4.95 4.45 4.00
D 5134 24 Port Cat 6 64.95 58.50 52.00 13.40 12.75 P 1632A Yellow 2m 6.95 6.25 5.50
Price Each P 1644A Black 2m 6.95 6.25 5.50
Cat 5e & Cat 6 RJ45 Joiners Clipsal® brand 7.95 7.45 P 1654A Green 2m 6.95 6.25 5.50
P 7976 Cat5e 8.95 8.30 P 1662A Blue 3m 6.95 6.25 5.50
Network cable joiner. P 7978 Cat6 P 1672A Red 3m 6.95 6.25 5.50
Straight through, pin to Generic brand - suit Clipsal plate P 1633A Yellow 3m 8.95 8.25 6.95
pin. P 7977 Cat5e P 1645A Black 3m 8.95 8.25 6.95
P 7979 Cat6 P 1655A Green 3m 8.95 8.25 6.95
P 1663A Blue 5m 8.95 8.25 6.95
Price Each RRP 4+ 10+ New Items P 1673A Red 5m 8.95 8.25 6.95
P 1635A Yellow 5m 12.25 11.35 10.35
D 5105 Cat 5e 9.95 9.25 8.50 For new items, we suggest you contact P 1647A Black 5m 12.25 11.35 10.35
D 5106 Cat 6 12.75 11.95 10.95 P 1657A Green 5m 12.25 11.35 10.35
us for stock availability before ordering. P 1664A Blue 10m 12.25 11.35 10.35
P 1674A 12.25 11.35 10.35
P 1637A 22.50 20.95 18.50

www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999

All prices shown are RRP inc. GST. Technology & Data 195

Modular Leads Leads & Adaptors

RS-232 To RS-485 Converter DE15 High Density Video Leads

Price Each RRP 10+ 40+ Converts DE15 RS-232 Male Female
2.95 2.70 2.45 output from a DVR to
3.5mm Plug to RJ12 6P6C Lead RS-485 output suitable Price Each RRP 4+ 10+
P 7061 60cm for connection to P 1772 Male to Female 1.8M
cameras, PTZ P 1773 Male to Male 1.8M 10.45 9.40 8.35
controllers etc. Screw 12.05 10.85 9.65
terminal connections.
Surge protected. No
power required.

Price Each RRP 10+ 40+ Price Each RRP 2+ 4+
3.20 2.90 2.55 S 9720 41.50 37.50 33.50
RCA Plug to RJ9 4P2C Lead
P 7100 60cm USB To RS-485 Converter

Ideal for interfacing se- Price Each RRP 2+ 5+
curity equipment in P 1769 Male to 5 x BNC Plugs 24.95 22.45 20.50
large installations. Con-
Price Each RRP 10+ 40+ verts USB output from a DVI-I To VGA Adaptor
6.85 6.60 5.20 PC to RS-485 for trans-
605 Plug to RJ11 6P2C Lead mission over 1.2km.
P 7097 1.8m Screw terminal connec-
tions. Surge protected.
No power required.

Price Each RRP 10+ 40+ Price Each RRP 2+ 4+ Price Each RRP 4+ 10+
S 9721 38.50 34.50 31.00 19.95 17.95 16.95
RJ14 6P4C to RJ14 6P4C Leads DVI-I plug to VGA socket
P 7064 2m Black P 6560 Technology & Data
P 7066 2m Ivory
P 7065A 3m Ivory 4.50 4.00 3.50 USB To RS-232 Serial Converter 90° VGA DE15 Adaptor
P 7067A 10m Ivory 4.50 4.00 3.50
P 7069A 15m Ivory 4.85 4.30 3.75 Converts USB A type plug
9.40 8.35 7.50 to a DB9 serial plug. Suits
12.75 11.20 10.00 most operating systems.
1.5m lead. Supports
Windows 7 and Mac OS X.

Price Each RRP 10+ 40+ Price Each RRP 4+ 10+ Price Each RRP 4+ 10+
6.85 6.35 5.75 D 2340B 29.95 27.80 26.50 P 6558 DE15 Male to Female 5.95 5.40 4.95
RJ45 8P8C to RJ14 6P4C Lead
P 7063 3m Black 7

Configurable RJ45 Adaptors Gender Changer Adaptors

Serial Leads DE9 to DE9

DE9 to DE9 Straight Through

Male Female P 1690 P 1700 P 1710 P 1712
Price Each
Price Each RRP 4+ 10+ P 1710 DE9 Male to Male RRP 4+ 10+
P 1770 Male to Female 1.8m 8.35 7.50 6.70 P 1712 DE9 Female to Female 4.75 4.25 3.80
P 1779 Male to Female 5m 9.95 8.75 7.75 4.75 4.25 3.80
P 1771 Male to Male 1.8m 8.35 7.50 6.70 DE15 to DE15 (VGA)
All have RJ45 socket on rear of adaptor.
DE9 to DE9 Null
Price Per RRP 4+ 10+
P 1723 P 1724
P 1690 DE9 Male 3.95 3.55 3.15
P 1692 DE9 Female 3.95 3.55 3.15
P 1700 DB25 Male 6.20 5.60 4.95

Female Female Disk Drive Power Splitter Price Each RRP 4+ 10+

Price Each RRP 4+ 10+ P 1723 DE15 Male to Male 5.95 5.35 4.75
P 1775 Fem. to Fem. 1.8m Null 7.95 7.15 6.35
P 1724 DE15 Female to Female 5.95 5.35 4.75

DB25 to DB25 Straight Through 3.5” Female 2 x 5.25” Female DB25 to DB25

5.25” Male

Splits a 5.25” into two 5.25” and one 3.5”.

Male Female Price Each RRP 4+ 10+ Price Each RRP 4+ 10+
P 1799 30cm 4.95 4.50 4.00
Price Each 4+ 10+
P 1776 Male to Female 1.8m 7.50 6.70 P 1716 DB25 Female to Female 6.70 6.00 5.35

RRP SATA 15-Pin to Molex 4-Pin Adaptor
8.35
Looking for HDMI & Display
DB25 to DE9 Straight Through SATA 15-Pin input to Molex Port Products?
4-Pin output adaptor for
connection between hard See page 25 of the Audio Visual section
drive and power supply.
for a complete range of HDMI and
new
Display Port leads.
Price Each RRP 4+ 10+ Price Each RRP 4+ 10+
P 1740 Male to Female 30cm 7.95 6.90 6.10 P 1796 5.95 5.65 5.25

Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au

196 Kits & Toys All prices shown are RRP inc. GST.

Velleman® 3D Printer

K8200 3D Printer - Bring 3D plastics prototyping to your desktop!

3D printing is a revolution in desktop fabricating, allowing users to print off their own product designs, prototypes and
replacement parts. The revolution that is the enthusiast ‘maker’ has truly arrived, allowing just about anyone to download
designs from the internet and at the click of a button send them to a 3D printer for quick fabrication. Constructed from
extruded aluminium and fitted with four quality NEMA 17 stepper motors, this kit provides excellent precision, speed and
reliability. The design can be easily modified and refined for the kit builder wanting to experiment.
This printer is for advanced kit builders & will take on average 15-20 hours to finish.

Velleman® K8200 3D Printer Kit

This build it yourself 3D printer kit allows you to print objects up to a maximum of 20
x 20 x 20 cm using PLA or ABS filament (3 mm plastic wire). The K8200 is compati-
ble with all free RepRap software and firmware and features a heated print bed.

What is the K8200 3D printer?
It’s a build it yourself 3D printer kit for everyone. It’s super easy to use, and helps you
turn your ideas into real stuff you can hold, like toys and mugs.

What can I make?
As long as the piece fits into the K8200 print area (20x20x20cm), you’re limited only
by your imagination! We’ve seen people make robots, planes, mugs, doorknobs, dog
tags, phone cases and holders, napkin rings, linked bracelets, chess pieces, minia-
ture models and much more! Any design will start as a 3D model on your PC, which
is then printed by the K8200.

How does it work?
It builds up material to create a real object. It melts plastic filament, then draws with
it in a very fine layer. It then builds up fine layers of plastic on top of each other, build-
ing your idea in slices from the bottom up. Until you have a plastic object ready to
hold and use.

Kits & Toys What colours can I use? new
The reels that work with the K8200 come in different colours (listed below). You can
use one colour at a time while printing. If you want your creation to be multi-coloured, Extruded aluminium construction allows you to hack, tweak
you can print it in separate pieces and attach them together later. You cannot swap and mod the design to your liking. Check out the video online!
the cartridge in the middle of a print.

How long does it take to print?
The print time is proportional to the size and complexity of the design. An average
phone case will take about 30 minutes.

8 What else can it do?
With some modification the 3D printer can also be used as a CNC engraver or PCB

drilling machine. Ideal for making your own electronic designs.

For more information visit www.k8200.eu or www.velleman.eu

Features • Full step by step instructions provided with excellent online support from Velleman SPECIFICATIONS
• Works with PLA and ABS filaments • 20 x 20 x 20cm build area • Heated print bed Linear ball bearings:
• Printing resolution (layers): 0.20 - 0.25mm • Aluminium extrusion design Technology:
• Easily customised to suit your needs • Can be modified into a engraving/PCB drilling Power supply:
machine - see website for details • Repetier version 0.84 and up FTDI USB 2.0 to Serial
Dimensions of printable area:
Optional Accessories Typical printing speed: 8 and 10 mm
Maximum print speed: FFF (Fused Filament Fabrication) for PLA and ABS
The K8200 includes everything you need to get printing, however there are a couple Extrusion nozzle:
of add-ons available if you want to make your machine even more useful. Extrusion thermistor: 15 V / 6.6A max.
Extruded aluminium profiles:
K 8230 3D Printer Control Module Movement: 20 x 20 x 20cm
This module allows you to use the K8200 without con- 120 mm/s
necting it to a PC. Fitted with an SD card slot, designs can
be uploaded to an SD card and printed directly from 150 to 300 mm/s (depending on the object to be printed)
memory. Designed to work with GCODE files. LCD shows 0.5 mm
real time temperature, control of the extruder and heated
bed temperature. NTC 100K
27.5 mm
K 8234 Printer Head LED Lighting Ring 4 NEMA 17 stepper motors
Fitted with 9 wide-angle ultrabright white LEDs to provide
you with all the light you need around the extruder nozzle Resolution
and take away annoying shadows.
Nominal mechanical resolution:

X & Y: 0.015 mm (smallest step the plate can move in the X & Y direction)

Z: 0.781 µm (smallest step the plate can move in the Z direction)

Nominal printing resolution:

Wall thickness (X,Y): 0.5 mm

Layer thickness (Z): 0.20 - 0.25 mm

Filament Reels RRP Dimensions: 500W x 420D x 620Hmm
Weight: 9kg
Price Each 44.95 Software:
K 8210 PLA Black 1kg Filament 44.95 Included accessories: Repetier version 0.84 and up www.repetier.com
K 8213 PLA White 1kg Filament 44.95 5m PLA black sample & power supply.
K 8215 PLA Grey 1kg Filament 42.95
K 8220 ABS Black 1kg Filament 42.95 Price Each RRP
K 8223 ABS White 1kg Filament
K 8200 1299.00
K 8230 Printer control module 149.00
K 8234 Lighting ring 34.95

www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999

All prices shown are RRP inc. GST. Kits & Toys 197

2 x 20W Class A Amplifier Kit Audio

240V 2 x 135W Ultra LD Mk.3 Class AB Audio Amplifier Kit

240V

Considered by Silicon Chip (SC Mar-May ‘12) A stunning low distortion, high power stereo amplifier designed
to be unequivocally one of the lowest for superb performance in any 2 channel audio system. It delivers 135W RMS per
distortion amplifier designs ever produced! channel into 8 ohms (or 200W RMS into 4 ohms). It utilises two of the K 5154 Mk. 3
amplifier module kits, plus power supply board, toroid, speaker protector kit, input
(SC May-September 2007) The latest ultra low distortion 2x20W RMS Class-A am- and pre-amp boards - all supplied in a stylish 2RU all metal chassis. Silicon Chip
plifier and low noise preamp from Silicon Chip. With a THD specification of just have vastly improved the performance of the amplifier modules over the Mk. 2 edi-
0.0006% it can barely be measured even on pro grade test equipment! A pure Class- tion. It features less than half as much distortion at frequencies of 2kHz or above. It
A design for audiophiles to enjoy. Silicon Chip have spent many hours of R&D not also boasts much improved thermal stability & flatter frequency response. Produces
only improving the performance of the amplifier, but also to make it drastically easier incredibly low levels of distortion even at high power outputs. The class AB design
to construct. The module based design can be tackled in stages, whilst the shielded runs much cooler than genuine class A amps, without sacrificing performance.
toroidal transformer means no need to enclose the power supply separately. It in-
cludes remote volume control, speaker protection & muting module, low noise power Features • Professional quality screened front and rear panels • Remote control volume (see
supply, transformer and all components required to construct a fully built amp. Each A 1012 for remote to suit) • Class AB design with a very low 0.0006% distortion • 135 Watts
module is also available individually for those wishing to construct custom designs. RMS per channel into 8 • Speaker protection • Case CNC machined and punched for
We must stress however, if you are planning on building the amp as per the accuracy and finish • Tough texture powdercoated chassis • Toroidal transformer for
Silicon Chip design, please purchase the full K 5125 kit as we cannot provide reliability and performance • Internal spade connections, no need to solder wires
chassis parts separately.

Features • Stunning performance based upon the MJL21193 & MJL21194 transistors SPECIFICATIONS 123dB (un-weighted) Kits & Toys
• Professional quality screened front and rear panels • Remote control volume (see A 1012 SNR: 135W RMS into 8 (per channel)
for remote to suit) • Class A design with a very low 0.0006% distortion • 20 Watts RMS per Power: < 0.004% from 20Hz to 20kHz. 0.0006% typical
channel • Speaker protection • Case CNC machined and punched for accuracy and finish Distortion:
• Tough texture powdercoated chassis • Toroidal transformer for reliability and performance Frequency response: +0, -0.3 (8 ), 10Hz - 20KHz
• Internal spade connections, no need to solder wires
Price Each RRP 2+
SPECIFICATIONS 2 x 20W @ 8 (pure Class-A) K 5165 8
Output power: -115dB unweighted, -118dB A weighted 749.00 675.00
SNR:
Distortion: < 0.002%, typically 0.0006% Individual Modules From The K 5165 Amplifier
Frequency range: 20Hz-20kHz ±0.5dB
Dimensions (mm): 420W x 430D x 87H
Weight: 13kg

Price Each RRP 2+
K 5125
599.00 539.00

Individual Modules From The K 5125 Amplifier

K 5164 K 5167

K 5154 (excludes heatsink)

K 5124 K 5129

K 5169

K 5168

K 5126 & K 5127 (excludes heatsink) K 5128 For those who wish to build their own custom amplifier design based on the K 5165
amp, the following modules are available including all specified components & PCB.

For those who wish to build their own custom amplifier design based on the K 5125 Price Each RRP 4+
amp, the following modules are available including all specified components & PCB. K 5154 135W amplifier module kit
K 5164 Input module kit 85.00 80.00
Price Each RRP 4+ K 5166 Metal chassis kit 35.95 32.35
MA5417 Toroidal transformer to suit K 5167 Speaker protection module kit 235.00 210.00
K 5124 Speaker protection module kit 109.00 26.95 K 5168 Power supply module kit 24.95 22.45
K 5126 Right channel amplifier module kit 29.95 44.95 K 5169 Pre-amplifier kit 32.95 29.50
K 5127 Left channel amplifier module kit 49.95 44.95 K 5170 Chassis components 34.95 31.50
K 5128 Power supply module kit 49.95 31.45 MC5540 Toroidal transformer to suit 31.95 28.95
K 5129 Pre-amplifier module kit 34.95 70.65 H 0536 Diecast Heatsink to suit K 5154 99.95 79.95
79.95 25.95 23.35

Wholesale (approved accounts): 1300 780 999 | Retail, Trade & Government: 1300 797 007 | www.altronics.com.au

198 Kits & Toys All prices shown are RRP inc. GST.

Audio

Ultra-Fidelity Pre-Amplifier Kit 50W Stereo Amp Module Kit

(SC Feb ’95) This is a complete stereo SPECIFICATIONS
output module, including heatsinks, power
supply components (less transformer), Output power: 47W RMS into 8
making it an extremely compact amplifier.
Designed around the LM3886 IC. M 5325 Power supply: 25/25 ac 160VA
required for power supply.
Signal to noise ratio: - 99dB (unweighted)
Price Each
K 5130 Distortion: <0.05% 20Hz - 20kHz
M 5325 Transformer to suit
240V

(SC September ‘05) An ultra-fidelity, low distortion stereo pre-amplifier. So good is RRP 4+
the design, it is suitable for use as a Class A amplifier front end. All the inputs are
relay switched at the back of the unit, ensuring an absolute minimum of signal distor- 79.95 74.50
tion and colouration. The state of the art design includes an infra-red remote volume 66.00
control with mute function and input selection. The ultra-fidelity headphone amplifier
provides exceptional audio performance. The pre-amplifier is supplied with a profes- 50W Amp Module Kit
sionally CNC punched and silk screened chassis. This is the ultimate audiophile DIY
pre-amplifier with performance equal or better to commercially available products (SC Jan ’03) For sound quality and
costing several times the price. power at a reasonable cost you can’t go
past this superb module. Designed to
Features • Professional quality screened front and rear panels • Remote control input replace the popular ETI480 module this
selection and volume level (see A 1012 for remote to suit) • 2 x 6.35mm headphone outputs unit has fantastic specifications. One
• Designed to operate with class A amplifier • Ultra-fidelity headphone amplifier • Minimal power supply board required per
signal distortion for studio level performance • 1U 19” rack mountable (rack ears included)
K 5120 used (ie: a stereo amp would
SPECIFICATIONS require 2 x K 5120 and 2 x K 5122).
Frequency response
Total Harmonic Distortion Flat from 10Hz to 20kHz, -1dB @ 82kHz SPECIFICATIONS
Signal to Noise Ratio Typically 0.0005%
Channel crosstalk -102dB unweighted Output power: 50W RMS into 8

Price Each -96dB @ 1kHz, -73dB @ 10kHz Power supply: ±40V dc 2.4A
K 5500
Kits & Toys RRP 2+ Signal to noise ratio: - 114dB (unweighted)

300.00 270.00 Distortion: <0.05% 20Hz - 20kHz K 5122

Frequency response: 20 Hz to 20kHz

Individual Modules For K 5500 Pre-Amplifier Price Each RRP 4+
K 5120
K 5122 ±40V dc power supply to suit 55.00 50.00
19.50 17.80

8 40 Watt Amp Module Kit

K 5501 (SC March ’94) Very compact module,
designed around the National LM3876
K 5503 40W power amplifier IC. The overall per-
formance is quite amazing for such a sim-
ple design. Kit supplied complete with all
parts including the specified heatsink.
Power supply not included.

K 5504 K 5502 SPECIFICATIONS 40W rms into 8 Includes heatsink
Output power: ±37.5V dc
For those who wish to build their own custom pre-amplifier design based on the Power supply:
K 5500 studio pre-amp, the following modules are available including all specified Signal to noise ratio: - 114dB (A-weighted),
components and PCB: 106dB (20 - 20kHz)
K 5501 (SC October ‘05): A compact high performance, low noise linear power Distortion: 0.002% @ 40W 1kHz
supply module designed specifically to power the studio pre-amplifier modules. ±15V. IHF power output:
K 5502 (SC October ‘05): Utilising the latest ultra low noise high performance op 60W @ 1kHz
amps. Featuring 5 stereo RCA inputs plus easy integration with the headphone ampli-
fier and power supply module. Unbelievably low 0.0005% distortion! Supplied with Price Each RRP 5+
PCB, components, input rotary switch, volume pot and cabling. K 5114
K 5503 (SC November ‘05): Ultra low noise, low distortion design. M 5325 Transformer to suit 45.00 40.00
Drives high and low impedance headphones. Dual headphone outputs provided. De- 66.00
livers 300mW into 32 . For stand-alone headphone amplifier use we recommend
the K 5501 power supply for optimum performance. 12V 20 Watt Amplifier Module Kit Includes
K 5504 (SC April ‘06): This board allows infra red remote control of both volume heatsink
level and input selection. LED indicators are provided for each input. Motorised vol- (SC May 2010) Amplifiers which run from
ume control pot included. 12V dc generally don’t put out much
power and they are usually not hi-fi as
Price Each RRP 4+ well. But this little stereo amplifier ticks the RRP 4+
K 5501 Power supply kit power and low distortion boxes. With a
K 5502 Input board kit 19.95 17.50 14.4V dc supply, it will deliver 20 watts per 49.95 44.50
K 5503 Headphone amplifier kit 59.95 55.00 channel into 4 Ohm loads at clipping while
K 5504 Remote control volume kit 34.95 31.50 harmonic distortion at lower power levels
59.95 55.00 is typically less than 0.03%.

Price Each
K 5136

www.altronics.com.au | Retail, Trade & Government: 1300 797 007 | Wholesale (approved accounts): 1300 780 999