TOILET FLUSH AND CALL DEVICE BA020
108 x 68 x 71 mm
Toilet flush and call device, radio-controlled, compa-
tible with 868.4 MHz systems in ABS, grey.
Individual 32 bit address - can be taught-in at the
receiver. Range up to 10 m.
Operation with capacitive buttons and acoustic ack-
nowledgement by touch tone.
Battery-powered with 2 x 1.5 V batteries LR-6.
Service life approx. 3 years or 100,000 releases.
Protection rating IP 54
Mounting: With two plastic clamps on (hinged-), (wall-
floor-) support rail. Handle outer diameter max. 33
mm. (Rail provided by the customer).
Delivery includes fixing material and batteries.
Weight, including single package: 0.2 kg
Suggested text for specifications:
Toilet flush and call device, radio-controlled, com-
patible with 868.4 MHz systems, battery powered,
for mounting on (hinged-), (wall-floor-) support rail
on site, in ABS, grey. Range up to 10 m. Operation
with capacitive buttons and acoustic acknowledge-
ment by touch tone. Protection rating IP 54. Delivery
includes fixing material and batteries.
Dimensions: 108 x 68 x 71 mm
Article No. BA020
Options ID No.
Receiver for call device BA025 600 025
Available surface ID No.
Plastic, grey 600 020
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
RECEIVER FOR CALL DEVICE BA025
153 x 85 x 110 mm
Receiver for call device, radio-controlled, compatible
with 868.4 MHz systems.
5m long, 42V/0.5A loadable, potential-free relay out-
put (NO contact).
Teach-in function for receiving call-signals.
Mains-operated with 6V wall plug transformer.
Mounting: With up to four screws.
Delivery includes wall plug transformer.
Weight, including single package: 0.4 kg
Suggested text for specifications:
Receiver for call device, radio-controlled, compa-
tible with 868.4 MHz-systems, mains-operated with
teach-in function. 5m long, 42V/0.5A loadable,
potential-free relay output. Delivery includes 6V wall
plug transformer.
Dimensions call receiver: 86 x 47 x 16 mm
Dimensions wall plug transformer: 35 x 65 x 64 mm
Article No. BA025
Available surface ID No.
Plastic 600 025
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
SHOWER HEAD HOLDER BA035
88 x 37 x 113 mm
Shower head holder in nylon, grey.
For shower rails with tube diameter 32 mm.
Continuously height-adjustable and rotatable.
Cone with stepless angle adjustment, designed for
standard hand showers.
Laterally integrated multi-purpose hook.
Mounting: By pushing on the shower rail.
Weight, including single package: 0,2 kg
Suggested text for specifications:
Shower head holder with laterally integrated multi-
purpose hook for shower rails with tube diameter
32 mm in nylon, grey. Continuously height-adjustab-
le and rotatable. Cone for hand shower with step-
less angle adjustment.
Dimensions 88 x 37 x 113 mm
Article No. BA035
Available surface ID No.
Plastic, grey 600 035
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
SHOWER CURTAIN RING BA045
56 x 81 x 8 mm
Shower curtain ring in nylon, grey.
Open at the top.
Mounting: By clipping on shower curtain rails with
tube diameter 32 mm.
Weight, including single package: 0.1 kg
(Packaging unit: 10 pcs.).
Suggested text for specifications:
Shower curtain ring, open at the top, for shower cur-
tain rails with tube diameter 32 mm, in nylon, grey.
Dimensions: 56 x 81 x 8 mm
Packaging unit 10 pcs.
Article No. BA045
Available surface ID No.
Plastic, grey 600 045
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
TOILET FLUSH DEVICE BA063
108 x 68 x 71 mm
Toilet flush device for large and small volume of water,
radio-controlled, compatible with 868.4 MHz systems,
in ABS, grey.
Individual 32 bit address, to be taught-in at the recei-
ver. Range up to 10 m.
Operation with capacitive buttons and acoustic ack-
nowledgement by touch tone.
Battery-powered with 2 x 1.5 V batteries LR-6.
Service life approx. 3 years or 100,000 releases.
Protection rating IP 54
Mounting: With two plastic clamps on (hinged-),
(wall-floor-) support rail. Handle outer diameter max.
33 mm. (Rail provided by the customer).
Delivery includes fixing material and batteries.
Weight, including single package: 0.2 kg
Suggested text for specifications:
Toilet flush device for large and small volume of
water, radio-controlled, compatible with 868.4 MHz
systems, battery powered, for mounting on (hinged-),
(wall-floor-) support rail on site, in ABS, grey. Range
up to 10 m. Operation with capacitive buttons and
acoustic acknowledgement by touch tone. Protection
rating IP 54. Delivery includes fixing material and
batteries.
Dimensions: 108 x 68 x 71 mm
Article No. BA063
Available surface ID No.
Plastic, grey 600 063
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
REMOVABLE FOLD SEAT BA200
430 x 470 x 580 mm
Removable fold seat in chrome-plated brass for
hooking onto existing shower grab rail, angled rail
with shower rail and shower grab rail for tube diame-
ter 32 mm, clearance from wall 106 mm.
Folding seat surface with water drain and backrest in
black polyurethane.
TÜV/GS-tested and certified by TÜV Rheinland.
Supports weight up to 130 kg.
Mounting: By hooking onto existing handle.
Weight, including single package: 12.3 kg
Suggested text for specifications:
Removable fold seat in chrome-plated brass for
hooking onto existing shower grab rail, angled rail
with shower rail or shower grab rail, for tube diame-
ter 32 mm, clearance from wall 106 mm. Seating
surface with water drain and backrest in black
polyurethane. TÜV/GS-tested and certified by TÜV
Rheinland, supports weight up to 130 kg. Delivery
includes fixing material.
Dimensions: 430 x 470 x 580 mm
Article No. BA200
Available surface ID No.
chrome-plated 600 200
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
FOLD SEAT FOR WALL MOUNTING BA210
460 x 180 x 435 mm
Folding seat with consoles in cast metal and chrome-
plated plastic covers for wall mounting.
Folding seat surface with water drain in black polyure-
thane.
TÜV/GS-tested and certified by TÜV Rheinland.
Supports weight up to 150 kg.
Mounting: With six screws.
Delivery includes fixing material for solid masonry.
Weight, including single package: 9.1 kg
Suggested text for specifications:
Folding seat with consoles cast metal and chrome-
plated plastic covers for wall mounting. fold seat sur-
face with water drain in black polyurethane. TÜV/
GS-tested and certified by TÜV Rheinland, supports
weight up to 150 kg Delivery includes fixing materi-
al for solid masonry.
Dimensions: 460 x 180 x 435 mm
Article No. BA210
Options ID No.
Back rest for fold seat BA220 600 220
Available surface ID No.
chrome-plated 600 210
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
BACK REST FOR FOLD SEAT BA220
380 x 175 x 30 mm
Back rest for fold seat in black polyurethane with
mounting plate in stainless steel (AISI 304) for wall
mounting.
Removable for cleaning.
TÜV/GS-tested and certified by TÜV Rheinland.
Mounting: Mounting plate with three screws. Backrest
is clipped on it.
Delivery includes fixing material.
Weight, including single package: 1.4 kg
Suggested text for specifications:
Back rest for fold seat in black polyurethane with
mounting plate in stainless steel (AISI 304) for wall
mounting. Removable for cleaning. TÜV/GS-tested
and certified by TÜV Rheinland. Delivery includes
fixing material.
Dimensions: 380 x 175 x 30 mm
Article No. BA220
Available surface ID No.
Plastic, black 600 220
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
REMOVABLE BACK REST FOR TOILET SEAT BA250
543 x 180 x 140 mm
Removable back rest for toilet seat in black poly-
urethane, including 500 mm rail in stainless steel
(AISI 304).
Removable for cleaning.
Mounting: Rail with six screws. Back rest is clipped
on.
Delivery includes fixing material.
Weight, including single package: 1.5 kg
Suggested text for specifications:
Back rest for toilet seat in black polyurethane, inclu-
ding 500 mm rail in stainless steel (AISI 304) for
wall mounting. Removable for cleaning. Delivery
includes fixing material.
Dimensions: 543 x 180 x 140 mm
Article No. BA250
Available surface ID No.
satin finished / plastics black 600 250
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
CORNER BASKET BA260
220 x 47 x 160 mm
Corner basket in chrome-plated brass.
Solid edge and 4 mm thick wires.
Concealed anti-theft wall mountings.
Mounting: With four screws.
Delivery includes fixing material.
Weight, including single package: 0.5 kg
Suggested text for specifications:
Corner basket in chrome-plated brass. Solid edge
and 4 mm thick wires. Concealed anti-theft wall
mountings. Delivery includes fixing material.
Dimensions: 220 x 47 x 160 mm
Article No. BA260
Available surface ID No.
Chrome-plated brass 600 260
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
STRAIGHT BASKET BA270
265 x 87 x 123 mm
Straight basket in chrome-plated brass.
Solid edge and 4 mm thick wires.
Concealed anti-theft wall mountings.
Mounting: With two screws.
Delivery includes fixing material.
Weight, including single package: 0.9 kg
Suggested text for specifications:
Straight basket in chrome-plated brass. Solid edge
and 4 mm thick wires. Concealed anti-theft wall
mountings. Delivery includes fixing material.
Dimensions: 265 x 87 x 123 mm
Article No. BA270
Available surface ID No.
Chrome-plated brass 600 270
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
ADJUSTABLE MIRROR BA300
600 x 540 x 90 mm
Adjustable mirror in robust, germ-reducing and easy-
care stainless steel mirror sheet metal (AISI 304).
All-stainless steel construction, control lever satin fini-
shed, to be installed left or right.
Tilt angle continuously adjustable +/- 15 °.
Mounting: With four screws through key holes and
one optional anti-theft hole in the wall console.
Delivery includes fixing material.
Weight, including single package: 9.0 kg
Suggested text for specifications:
Adjustable mirror in robust, germ-reducing and easy-
care stainless steel mirror sheet metal (AISI 304).
All-stainless steel construction, control lever satin
finished, to be installed left or right. Tilt angle conti-
nuously adjustable +/- 15 °. Delivery includes fixing
material.
Dimensions: 600 x 540 x 90 mm
Article No. BA300
Available surface ID No.
Mirror sheet metal 601 300
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
GRAB RAIL BF600
300-1000 mm
Grab rail in robust, germ-reducing and easy-care stain-
less steel (AISI 304), satin finished.
Further available surfaces: see below.
Outer diameter of tubes 32 mm for ergonomic hold,
clearance from wall 106 mm, bend radii 75 mm.
Wall mountings with 8-point mounting plate – can be
freely rotated, 4 mm thick with 2K-wall sealing-disc.
Supports weight up to 125 kg.
Concealed fixings 75 mm in diameter, anti-theft, with
silicone sealing ring at tube joint.
TÜV-certified in accordance with DIN EN 12182,
CE-marked in accordance with 93/42 EEC.
Mounting: With six screws.
Delivery includes fixing material.
Intermediate sizes available upon request.
Suggested text for specifications:
Grab rail in stainless steel (AISI 304), outer diameter
of tubes 32 mm, clearance from wall 106 mm, surface
satin finished. Wall mountings with 8-point moun-
ting plate – can be freely rotated, 4 mm thick with
2K-wall sealing-disc; supports weight up to 125 kg.
Concealed fixings 75 mm in diameter, anti-theft,
with silicone sealing ring at tube joint. TÜV-certified
in accordance with DIN EN 12182, CE-marked in
accordance with 93/42 EEC. Delivery includes fixing
material.
Length ...... mm
Article No. BF600
Available surfaces Length / ID No. 500 mm 600 mm 1000 mm
300 mm 400 mm 600 500 600 600 601 000
satin finished (standard) 600 300 600 400 600 510 600 610 601 010
textured 600 310 600 410
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
SHOWER RISER BF601
600-1100 mm
Shower riser with shower head holder in robust, germ-
reducing and easy-care stainless steel (AISI 304), satin
finished.
Outer diameter of tubes 32 mm for ergonomic hold,
clearance from wall 106 mm, bend radii 75 mm.
Shower head holder BA035 in nylon continuously
height-adjustable and rotatable.
Wall mountings with 8-point mounting plate – can be
freely rotated, 4 mm thick with 2K-wall sealing-disc.
Supports weight up to 125 kg.
Concealed fixings 75 mm in diameter, anti-theft, with
silicone sealing ring at tube joint.
TÜV-certified in accordance with DIN EN 12182,
CE-marked in accordance with 93/42 EEC.
Mounting: With six screws.
Delivery includes fixing material.
Intermediate sizes available upon request.
Suggested text for specifications:
Shower riser with shower head holder in stainless
steel (AISI 304), outer diameter of tubes 32 mm,
clearance from wall 106 mm, surface satin finished.
Shower head holder in nylon continuously height-
adjustable and rotatable. Wall mountings with
8-point mounting plate – can be freely rotated, 4
mm thick with 2K-wall sealing-disc; supports weight
up to 125 kg. Concealed fixings 75 mm in diameter,
anti-theft, with silicone sealing ring at tube joint.
TÜV-certified in accordance with DIN EN 12182,
CE-marked in accordance with 93/42 EEC. Delivery
includes fixing material.
Length ...... mm
Article No. BF601
Options ID No.
Corner basket BA 260 600 260
Straight basket BA 270 600 270
Available surface Length / ID No. 1000 mm 1100 mm
satin finished 600 mm 800 mm 601 001 601 100
601 600 601 800
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
SUPPORT RAIL BF611
500-850 mm
Support rail in robust, germ-reducing and easy-care
stainless steel (AISI 304), satin finished.
Further available surfaces: see below.
Outer diameter of tubes 32 mm for ergonomic hold,
bend radii 75 mm.
Wall mountings with 6-point mounting plate,
90 x 250 x 4 mm, and with 2K-wall sealing-disc.
Supports weight up to 125 kg.
Fastening concealed by self-locking wall cover.
TÜV-certified in accordance with DIN EN 12182,
CE-marked in accordance with 93/42 EEC.
Mounting: With six screws.
Fixing material available as accessories for different
kinds of walls.
Intermediate sizes available upon request.
Suggested text for specifications:
Support rail in stainless steel (AISI 304), outer
diameter of tubes 32 mm, surface satin finished.
Wall mountings with 6-point mounting plate,
90 x 250 x 4 mm, and with 2K-wall sealing-disc;
supports weight up to 125 kg. Fastening concealed
by self-locking wall cover. TÜV-certified in accor-
dance with DIN EN 12182, CE-marked in accor-
dance with 93/42 EEC
Length ...... mm
Article No. BF611
Options ID No.
Toilet roll holder BA 010 600 010 Accessories fixing material / ID No.
wall structure 923 210
Pre-installed fixing plate with cover BA 017 600 017
Wood
Toilet flush and call device BA 020 600 020 Concrete (>B15) 923 211
Toilet flush device BA 063 600 063 Light concrete/gas concrete/vertical coring bricks 923 212
Available surfaces Length / ID No. 700 mm 850 mm
500 mm 600 mm 611 700 611 800
satin finished (standard) 611 500 611 600 611 710 611 810
textured 611 510 611 610
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
ANGLED GRAB RAIL 90° BF620
650 x 350-750 x 400 mm
Angled grab rail 90° in robust, germ-reducing and
easy-care stainless steel (AISI 304), satin finished.
Further available surfaces: see below.
Outer diameter of tubes 32 mm for ergonomic hold,
clearance from wall 106 mm, bend radii 75 mm.
Wall mountings with 8-point mounting plate – can be
freely rotated, 4 mm thick with 2K-wall sealing-disc.
Supports weight up to 125 kg.
Concealed fixings 75 mm in diameter, anti-theft, with
silicone sealing ring at tube joint.
TÜV-certified in accordance with DIN EN 12182,
CE-marked in accordance with 93/42 EEC.
Mounting: With nine screws.
Delivery includes fixing material.
Intermediate sizes available upon request.
Suggested text for specifications:
Angled grab rail 90° in stainless steel (AISI 304),
outer diameter of tubes 32 mm, clearance from wall
106 mm, surface satin finished. Wall mountings
with 8-point mounting plate – can be freely rota-
ted, 4 mm thick with 2K-wall sealing-disc; supports
weight up to 125 kg. Concealed fixings 75 mm
in diameter, anti-theft, with silicone sealing ring at
tube joint. TÜV-certified in accordance with DIN EN
12182, CE-marked in accordance with 93/42 EEC.
Delivery includes fixing material.
Version: left / right
Length ...... x Height ...... mm
Article No. BF620
Available surfaces Length x Height / ID No.
satin finished (standard) 650 x 350 mm left 650 x 350 mm right 750 x 400 mm left 750 x 400 mm right
textured
620 100 620 200 620 300 620 400
620 110 620 210 620 310 620 410
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
ANGLED GRAB RAIL 90° WITH SHOWER RISER BF625
1100 x 600 mm
Angled grab rail 90° with shower riser and shower
head holder in robust, germ-reducing and easy-care
stainless steel (AISI 304), satin finished.
Outer diameter of tubes 32 mm for ergonomic hold,
clearance from wall 106 mm, bend radii 75 mm.
Shower head holder in nylon continuously height-
adjustable and rotatable.
Wall mountings with 8-point mounting plate – can be
freely rotated, 4 mm thick with 2K-wall sealing-disc.
Supports weight up to 125 kg.
Concealed fixings 75 mm in diameter, anti-theft, with
silicone sealing ring at tube joint.
TÜV-certified in accordance with DIN EN 12182,
CE-marked in accordance with 93/42 EEC.
Mounting: With nine screws.
Delivery includes fixing material.
Intermediate sizes available upon request.
Suggested text for specifications:
Angled grab rail 90° with shower riser and shower
head holder in stainless steel (AISI 304), outer dia-
meter of tubes 32 mm, clearance from wall 106 mm,
surface satin finished. Shower head holder in nylon
continuously height-adjustable and rotatable. Wall
mountings with 8-point mounting plate – can be
freely rotated, 4 mm thick with 2K-wall sealing-disc;
supports weight up to 125 kg. Concealed fixings
75 mm in diameter, anti-theft, with silicone sealing
ring at tube joint. TÜV-certified in accordance with
DIN EN 12182, CE-marked in accordance with
93/42 EEC. Delivery includes fixing material.
Version: left / right
Length 600 x Height 1100 mm
Article No. BF625
Options ID No.
Corner basket BA260 600 260
Straight basket BA270 600 270
Available surfaces Length / ID No. 1100 x 600 mm right
satin finished 1100 x 600 mm left 625 600
625 500
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
ANGLED GRAB RAIL 45° BF630
500 mm
Angled grab rail 45° in robust, germ-reducing and
easy-care stainless steel (AISI 304), satin finished.
Further available surfaces: see below.
Outer diameter of tubes 32 mm for ergonomic hold,
clearance from wall 106 mm, bend radii 75 mm.
Wall mountings with 8-point mounting plate – can be
freely rotated, 4 mm thick with 2K-wall sealing-disc.
Supports weight up to 125 kg.
Concealed fixings 75 mm in diameter, anti-theft, with
silicone sealing ring at tube joint.
TÜV-certified in accordance with DIN EN 12182,
CE-marked in accordance with 93/42 EEC.
Mounting: With six screws.
Delivery includes fixing material.
Intermediate sizes available upon request.
Suggested text for specifications:
Angled grab rail 45° in stainless steel (AISI 304),
outer diameter of tubes 32 mm, clearance from wall
106 mm, surface satin finished. Wall mountings with
8-point mounting plate – can be freely rotated, 4
mm thick with 2K-wall sealing-disc; supports weight
up to 125 kg. Concealed fixings 75 mm in diameter,
anti-theft, with silicone sealing ring at tube joint.
TÜV-certified in accordance with DIN EN 12182,
CE-marked in accordance with 93/42 EEC. Delivery
includes fixing material.
Version: left / right
Length 500 x Height 270 mm
Article No. BF630
Available surfaces Length / ID No. 500 mm right
500 mm left 630 400
satin finished (standard) 630 300 630 410
textured 630 310
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
ANGLED GRAB RAIL 135° BF635
700 mm
Angled grab rail 135° in robust, germ-reducing and
easy-care stainless steel (AISI 304), satin finished.
Further available surfaces: see below.
Outer diameter of tubes 32 mm for ergonomic hold,
clearance from wall 106 mm, bend radii 75 mm.
Wall mountings with 8-point mounting plate – can be
freely rotated, 4 mm thick with 2K-wall sealing-disc.
Supports weight up to 125 kg.
Concealed fixings 75 mm in diameter, anti-theft, with
silicone sealing ring at tube joint.
TÜV-certified in accordance with DIN EN 12182,
CE-marked in accordance with 93/42 EEC.
Mounting: With six screws.
Delivery includes fixing material.
Intermediate sizes available upon request.
Suggested text for specifications:
Angled grab rail 135° in stainless steel (AISI 304),
outer diameter of tubes 32 mm, clearance from wall
106 mm, surface satin finished. Wall mountings with
8-point mounting plate – can be freely rotated, 4
mm thick with 2K-wall sealing-disc; supports weight
up to 125 kg. Concealed fixings 75 mm in diameter,
anti-theft, with silicone sealing ring at tube joint.
TÜV-certified in accordance with DIN EN 12182,
CE-marked in accordance with 93/42 EEC. Delivery
includes fixing material.
Version: left / right
Length 700 x Height 150 mm
Article No. BF635
Available surfaces Length / ID No. 700 mm right
700 mm left 635 200
satin finished (standard) 635 100 635 210
textured 635 110
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
SHOWER GRAB RAIL WITH SHOWER RISER BF640
(700 x 700-900 x 900) x 1150 mm
Shower grab rail with shower riser and shower head hol-
der in robust, germ-reducing and easy-care stainless steel
(AISI 304), satin finished.
Further available surfaces: see below.
Outer diameter of tubes 32 mm for ergonomic hold,
clearance from wall 106 mm, bend radii 75 mm.
Shower head holder in nylon continuously height-adjustable
and rotatable.
Wall mountings with 8-point mounting plate – can be freely
rotated, 4 mm thick with 2K-wall sealing-disc.
Supports weight up to 125 kg.
Concealed fixings 75 mm in diameter, anti-theft, with silico-
ne sealing ring at tube joint.
TÜV-certified in accordance with DIN EN 12182,
CE-marked in accordance with 93/42 EEC.
Mounting: With 15 screws.
Delivery includes fixing material.
Intermediate sizes available upon request.
Suggested text for specifications:
Shower grab rail with shower riser and shower head hol-
der in stainless steel (AISI 304), outer diameter of tubes
32 mm, clearance from wall 106 mm, surface satin fini-
shed. Shower head holder in nylon continuously height-
adjustable and rotatable. Wall mountings with 8-point
mounting plate – can be freely rotated, 4 mm thick with
2K-wall sealing-disc; supports weight up to 125 kg. Con-
cealed fixings 75 mm in diameter, anti-theft, with silicone
sealing ring at tube joint. TÜV-certified in accordance with
DIN EN 12182, CE-marked in accordance with 93/42 EEC.
Delivery includes fixing material.
Version: left / right
Length ...... x ...... x 1150 mm
Article No. BF640
Options ID No.
Corner basket BA 260 600 260
Straight basket BA 270 600 270
Available surfaces Length / ID No.
satin finished (standard) 900 mm left 800 mm left 700 mm left 900 mm right 800 mm right 700 mm right
textured
640 100 640 200 640 300 640 400 640 500 640 600
640 110 640 210 640 310 640 410 640 510 640 610
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
SHOWER GRAB RAIL BF650
700 x 700-900 x 900 mm
Shower grab rail in robust, germ-reducing and easy-
care stainless steel (AISI 304), satin finished.
Further available surfaces: see below.
Outer diameter of tubes 32 mm for ergonomic hold,
clearance from wall 106 mm, bend radii 75 mm.
Wall mountings with 8-point mounting plate – can be
freely rotated, 4 mm thick with 2K-wall sealing-disc.
Supports weight up to 125 kg.
Concealed fixings 75 mm in diameter, anti-theft, with
silicone sealing ring at tube joint.
TÜV-certified in accordance with DIN EN 12182,
CE-marked in accordance with 93/42 EEC.
Mounting: With nine screws.
Delivery includes fixing material.
Intermediate sizes available upon request.
Suggested text for specifications:
Shower grab rail in stainless steel (AISI 304),
outer diameter of tubes 32 mm, clearance from wall
106 mm, surface satin finished. Wall mountings with
8-point mounting plate – can be freely rotated, 4
mm thick with 2K-wall sealing-disc; supports weight
up to 125 kg. Concealed fixings 75 mm in diameter,
anti-theft, with silicone sealing ring at tube joint.
TÜV-certified in accordance with DIN EN 12182,
CE-marked in accordance with 93/42 EEC. Delivery
includes fixing material.
Length ...... x ...... mm
Article No. BF650
Options ID No.
Corner basket BA260 600 260
Straight basket BA270 600 270
Available surfaces Length / ID No.
satin finished (standard) 900 x 900 mm 800 x 800 mm 700 x 700 mm
textured 650 300
650 100 650 200 650 310
650 110 650 210
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
WALL-TO-FLOOR SUPPORT RAIL BF660
850 x 850-900 x 900 mm
Wall-to-floor support rail in robust, germ-reducing and
easy-care stainless steel (AISI 304), satin finished.
Further available surfaces: see below.
Outer diameter of tubes 32 mm for ergonomic hold,
bend radii 75 mm.
Wall/floor-mountings with 8-point mounting plate
– can be freely rotated, 4 mm thick with 2K-wall
sealing-disc.
Supports weight up to 125 kg.
Concealed fixings 75 mm in diameter, anti-theft, with
silicone sealing ring at tube joint.
TÜV-certified in accordance with DIN EN 12182,
CE-marked in accordance with 93/42 EEC.
Mounting: With nine screws.
Delivery includes fixing material.
Intermediate sizes available upon request.
Suggested text for specifications:
Wall-to-floor support rail in stainless steel (AISI 304),
outer diameter of tubes 32 mm, surface satin fini-
shed. Wall/floor-mountings with 8-point mounting
plate – can be freely rotated, 4 mm thick with
2K-wall sealing-disc; supports weight up to 125 kg.
Concealed fixings 75 mm in diameter, anti-theft,
with silicone sealing ring at tube joint. TÜV-certified
in accordance with DIN EN 12182, CE-marked in
accordance with 93/42 EEC. Delivery includes fixing
material.
Version: left / right
Length ...... x Height ...... mm
Article No. BF660
Options ID No.
Toilet roll holder BA010 600 010
Toilet flush and call device BA020 600 020
Toilet flush device BA063 600 063
Available surfaces Length x Height / ID No.
satin finished (standard) 850 mm right 900 mm right 850 mm left 900 mm left
textured 660 200 660 201
660 100 660 101 660 210 660 211
660 110 660 111
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
HINGED SUPPORT RAIL BF670
600-850 mm
Hinged support rail in robust, germ-reducing and easy-care
stainless steel (AISI 304), satin finished.
Further available surfaces: see below.
Outer diameter of tubes 32 mm for ergonomic hold, bend
radii 75 mm.
Full metal hinge with individually adjustable brake.
Wall mountings with 6-point mounting plate,
90 x 250 x 4 mm, and with 2K-wall sealing-disc.
Supports weight up to 125 kg.
Fastening concealed by self-locking wall cover.
TÜV-certified in accordance with DIN EN 12182,
CE-marked in accordance with 93/42 EEC.
Mounting: With six screws.
Fixing material available as accessories for different
kinds of walls.
Intermediate sizes available upon request.
Suggested text for specifications:
Hinged support rail in stainless steel (AISI 304), outer dia-
meter of tubes 32 mm, surface satin finished. Full metal
hinge with individually adjustable brake. Wall moun-
tings with 6-point mounting plate, 90 x 250 x 4 mm,
and with 2K-wall sealing-disc; supports weight up to
125 kg. Fastening concealed by self-locking wall cover.
TÜV-certified in accordance with DIN EN 12182, CE-
marked in accordance with 93/42 EEC.
Length ...... mm
Article No. BF670
Options ID No.
Toilet roll holder BA010 600 010 Accessories fixing material / ID No.
wall structure 923 210
Pre-installed fixing plate with cover BA017 600 017
Wood
Toilet flush and call device BA020 600 020 Concrete (>B15) 923 211
Toilet flush device BA063 600 063 Light concrete/gas concrete/vertical coring bricks 923 212
Available surfaces Length / ID No.
satin finished (standard) 600 mm 700 mm 850 mm
textured 670 300
670 100 670 200 670 310
670 110 670 210
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
CORNER SHOWER CURTAIN RAIL BF680
900 x 900-1500 x 1500 mm
Corner shower curtain rail in robust, germ-reducing
and easy-care stainless steel (AISI 304), satin finished.
With ceiling suspension rod (please specify height
when ordering), height adjustable ± 50 mm.
Outer diameter of tubes 32 mm, bend radii 75 mm.
Wall mountings with 8-point mounting plate – can be
freely rotated, 4 mm thick with 2K-wall sealing-disc.
Supports weight up to 20 kg.
Concealed fixings 75 mm in diameter, anti-theft, with
silicone sealing ring at tube joint.
CE-marked in accordance with 93/42 EEC.
Mounting: With nine screws.
Delivery includes fixing material.
Intermediate sizes available upon request.
Suggested text for specifications:
Corner shower curtain rail in stainless steel
(AISI 304), outer diameter of tubes 32 mm, surface
satin finished. With ceiling suspension rod, height
adjustable ± 50 mm. Wall mountings with 8-point
mounting plate – can be freely rotated, 4 mm
thick with 2K-wall sealing-disc; supports weight up
to 20 kg. Concealed fixings 75 mm in diameter,
anti-theft, with silicone sealing ring at tube joint.
CE-marked in accordance with 93/42 EEC. Delivery
includes fixing material.
Length ...... x ...... mm
Height ceiling suspension ...... mm
Article No. BF680
Options ID No.
Shower curtain rings (10 pcs.) BA045 600 045
Available surfaces Length / ID No.
satin finished
900 x 900 mm 1000 x 1000 mm 1200 x 1200 mm 1500 x 1500 mm 1000 x 1200 mm 1000 x 1500 mm
680 100 680 200 680 300 680 400 680 500 680 600
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
STRAIGHT SHOWER CURTAIN RAIL BF690
900-1500 mm
Straight shower curtain rail in robust, germ-reducing
and easy-care stainless steel (AISI 304), satin finished.
Length adjustable ±- 5 mm.
Outer diameter of tubes 32 mm.
Wall mountings with 8-point mounting plate – can be
freely rotated, 4 mm thick with 2K-wall sealing-disc.
Supports weight up to 20 kg.
Concealed fixings 75 mm in diameter, anti-theft, with
silicone sealing ring at tube joint.
CE-marked in accordance with 93/42 EEC.
Mounting: With six screws.
Delivery includes fixing material.
Intermediate sizes available upon request.
Suggested text for specifications:
Straight shower curtain rail in stainless steel
(AISI 304), outer diameter of tubes 32 mm, surface
satin finished; Length adjustable ± 5 mm. Wall
mountings with 8-point mounting plate – can be free-
ly rotated, 4 mm thick with 2K-wall sealing-disc; sup-
ports weight up to 20 kg. Concealed fixings 75 mm
in diameter, anti-theft, with silicone sealing ring at
tube joint. CE-marked in accordance with 93/42 EEC.
Delivery includes fixing material.
Length ...... mm
Article No. BF690
Options ID No.
Shower curtain rings (10 pcs.) BA044 600 045
Available surface Length / ID No.
satin finished 900 mm 1000 mm 1200 mm 1500 mm
690 900 691 000 691 200 691 500
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
LIQUID SOAP DISPENSER L109 L
148 x 298 x 130 mm LINE
950 ml soap bottle
Liquid soap dispenser in robust, germ-reducing and
easy-care stainless steel (AISI 316L).
All-stainless steel housing; all corners fully welded,
visible surfaces satin finished and brushed.
Further available surfaces: see below.
Tapered front with vertical curved recess.
One-hand operated and non-drip soap pump.
Designed for standard 950 ml disposable bottles of
liquid soap or hand lotion.
Square perforations to indicate fill level.
Accessible for refilling through lockable front flap with
fall protection.
Keyed alike cylinder lock in corrosion-resistant zinc
die-casting.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and
one optional anti-theft hole in the back wall.
Delivery includes fixing material and first fill with
soap.
Weight, including single package: 2.9 kg
Suggested text for specifications:
Liquid soap dispenser in stainless steel (AISI 316L)
for surface mounting. All-stainless steel housing; all
corners fully welded, visible surfaces satin finished
and brushed. Tapered front with vertical curved
recess. One-hand operated and non-drip soap
pump. Designed for standard 950 ml disposable
bottles of liquid soap or hand lotion. Square perfo-
rations to indicate fill level. Accessible for refilling
through lockable front flap with fall protection.
Keyed alike cylinder lock in corrosion-resistant zinc
die-casting. Delivery includes fixing material and
first fill with soap.
Dimensions: 148 x 298 x 130 mm
Article No. L109
Available surfaces ID No.
satin finished (standard) 828 500
(coloured) plastic powder-coating 829 500
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
SENSOR LIQUID SOAP DISPENSER L109E L
148 x 298 x 130 mm LINE
500 ml soap bottle
Liquid soap dispenser in robust, germ-reducing and easy-
care stainless steel (AISI 316L).
All-stainless steel housing; all corners fully welded, visible
surfaces satin finished and brushed.
Further available surfaces: see below.
Tapered front with vertical curved recess.
With EWAR® eModule touch-free operated and non-drip
soap pump.
Designed for standard 500 ml bottles of liquid soap or
hand lotion.
Square perforations to indicate fill level.
Accessible for refilling through lockable front flap with fall
protection.
Keyed alike cylinder lock in corrosion-resistant zinc die-
casting.
eModule battery-powered with two 1.5 V Baby/LR14 batte-
ries. Power supply available as an option.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and one
optional anti-theft hole in the back wall.
Delivery includes fixing material and first fill with soap.
Weight, including single package: 3.3 kg
Suggested text for specifications:
Sensor liquid soap dispenser in stainless steel (AISI 316L)
for surface mounting. All-stainless steel housing; all
corners fully welded, visible surfaces satin finished and
brushed. Tapered front with vertical curved recess. With
touch-free operated and non-drip soap pump. Designed
for standard 950 ml disposable bottles of liquid soap
or hand lotion. Square perforations to indicate fill level.
Accessible for refilling through lockable front flap with fall
protection. Keyed alike cylinder lock in corrosion-resistant
zinc die-casting. Delivery includes fixing material, batte-
ries and first fill with soap.
Dimensions: 148 x 298 x 130 mm
Article No. L109e
Options ID No.
Power supply for eModule 923 060
Available surfaces ID No.
satin finished (standard) 828 510
(coloured) plastic powder-coating 829 510
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
PAPER TOWEL DISPENSER L111 L
298 x 448 x 130 mm LINE
approx. 750 paper towels
Paper towel dispenser in robust, germ-reducing and
easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded,
visible surfaces satin finished and brushed.
Further available surfaces: see below.
Tapered front with vertical curved recess.
With deep-drawn paper removal opening for easy
paper removal.
Designed for approx. 750 standard paper towels in
zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Square perforations to indicate fill level.
Accessible for refilling through lockable front flap with
fall protection.
Keyed alike cylinder lock in corrosion-resistant zinc
die-casting.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and
one optional anti-theft hole in the back wall.
Delivery includes fixing material and one pack of
paper towels.
Weight, including single package: 4.2 kg
Suggested text for specifications:
Paper towel dispenser in stainless steel (AISI 304)
for surface mounting. All-stainless steel housing; all
corners fully welded, visible surfaces satin finished
and brushed. Tapered front with vertical curved
recess. With deep-drawn paper removal opening,
filling quantity approx. 750 paper towels. Square
perforations to indicate fill level. Accessible for refil-
ling through lockable front flap with fall protection.
Keyed alike cylinder lock in corrosion-resistant zinc
die-casting. Delivery includes fixing material and
one pack of paper towels.
Dimensions: 298 x 448 x 130 mm
Article No. L111
Available surfaces ID No.
satin finished (standard) 828 433
(coloured) plastic powder-coating 829 433
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
PAPER TOWEL DISPENSER L113 L
298 x 298 x 130 mm LINE
approx. 500 paper towels
Paper towel dispenser in robust, germ-reducing and
easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded,
visible surfaces satin finished and brushed.
Further available surfaces: see below.
Tapered front with vertical curved recess.
With deep-drawn paper removal opening for easy
paper removal.
Designed for approx. 500 standard paper towels in
zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Square perforations to indicate fill level.
Accessible for refilling through lockable front flap with
fall protection.
Keyed alike cylinder lock in corrosion-resistant zinc
die-casting.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and
one optional anti-theft hole in the back wall.
Delivery includes fixing material and one pack of
paper towels.
Weight, including single package: 3.4 kg
Suggested text for specifications:
Paper towel dispenser in stainless steel (AISI 304)
for surface mounting. All-stainless steel housing; all
corners fully welded, visible surfaces satin finished
and brushed. Tapered front with vertical curved
recess. With deep-drawn paper removal opening,
filling quantity approx. 500 paper towels. Square
perforations to indicate fill level. Accessible for refil-
ling through lockable front flap with fall protection.
Keyed alike cylinder lock in corrosion-resistant zinc
die-casting. Delivery includes fixing material and
one pack of paper towels.
Dimensions: 298 x 298 x 130 mm
Article No. L113
Available surfaces ID No.
satin finished (standard) 828 449
(coloured) plastic powder-coating 829 449
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
WASTE BIN L133 L
298 x 598 x 140 mm LINE
Capacity approx. 12 l
Waste bin in robust, germ-reducing and easy-care
stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded,
visible surfaces satin finished and brushed.
Further available surfaces: see below.
Tapered front with vertical curved recess and arched
rectangular disposal opening.
Equipped with removable mesh basket. Capacity
approx. 12 l. Accessible through lockable door.
Keyed alike cylinder lock in corrosion-resistant zinc
die-casting.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and
one optional anti-theft hole in the back wall.
Delivery includes fixing material.
Weight, including single package: 5.4 kg
Suggested text for specifications:
Waste bin in stainless steel (AISI 304) for surface
mounting. All-stainless steel housing; all corners fully
welded, visible surfaces satin finished and brushed.
Tapered front with vertical curved recess and arched
rectangular disposal opening. Equipped with remo-
vable mesh basket. Capacity approx. 12 l. Acces-
sible through lockable door. Keyed alike cylinder
lock in corrosion-resistant zinc die-casting. Delivery
includes fixing material.
Dimensions: 298 x 598 x 140 mm
Article No. L133
Available surfaces ID No.
satin finished (standard) 828 800
(coloured) plastic powder-coating 829 800
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
WASTE BIN PERFORATED L184 L
298 x 598 x 180 mm LINE
Capacity approx. 32 l
Waste bin in robust, germ-reducing and easy-care
stainless steel (AISI 304).
All-stainless steel housing; visible surfaces satin fini-
shed and brushed.
Tapered front with vertical curved recess and 6 mm-
square perforations.
Capacity approx. 32 l.
Mounting: With two screws through key holes and
one optional anti-theft hole in the back wall.
Delivery includes fixing material.
Weight, including single package: 4.7 kg
Suggested text for specifications:
Waste bin in stainless steel (AISI 304) for surface
mounting. All-stainless steel housing; visible surfaces
satin finished and brushed. Tapered front with ver-
tical curved recess and 6 mm-square perforations.
Capacity approx. 32 l. Delivery includes fixing
material.
Dimensions: 298 x 598 x 180 mm
Article No. L184
Available surface ID No.
satin finished 828 130
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
WASTE BIN L185 L
298 x 598 x 180 mm LINE
Capacity approx. 32 l
Waste bin in robust, germ-reducing and easy-care
stainless steel (AISI 304).
All-stainless steel housing; visible surfaces satin fini-
shed and brushed. Further available surfaces: see
below.
Tapered front with vertical curved recess.
Capacity approx. 32 l.
Mounting: With two screws through key holes and
one optional anti-theft hole in the back wall.
Delivery includes fixing material.
Weight, including single package: 4.7 kg
Suggested text for specifications:
Waste bin in stainless steel (AISI 304) for surface
mounting. All-stainless steel housing; visible surfaces
satin finished and brushed. Tapered front with verti-
cal curved recess. Capacity approx. 32 l. Delivery
includes fixing material.
Dimensions: 298 x 598 x 180 mm
Article No. L185
Available surfaces ID No.
satin finished (standard) 828 160
(coloured) plastic powder-coating 829 160
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
WASTE BIN PERFORATED L186 L
298 x 448 x 180 mm; LINE
Capacity approx. 24 l
Waste bin in robust, germ-reducing and easy-care
stainless steel (AISI 304).
All-stainless steel housing; visible surfaces satin fini-
shed and brushed.
Tapered front with vertical curved recess and 6 mm-
square perforations.
Capacity approx. 24 l.
Mounting: With two screws through key holes and
one optional anti-theft hole in the back wall.
Delivery includes fixing material.
Weight, including single package: 3.8 kg
Suggested text for specifications:
Waste bin in stainless steel (AISI 304) for surface
mounting. All-stainless steel housing; visible surfaces
satin finished and brushed. Tapered front with ver-
tical curved recess and 6 mm-square perforations.
Capacity approx. 24 l. Delivery includes fixing
material.
Dimensions: 298 x 448 x 180 mm
Article No. L186
Available surface ID No.
satin finished 828 135
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
WASTE BIN L187 L
298 x 448 x 180 mm LINE
Capacity approx. 24 l
Waste bin in robust, germ-reducing and easy-care
stainless steel (AISI 304).
All-stainless steel housing; visible surfaces satin fini-
shed and brushed. Further available surfaces: see
below.
Tapered front with vertical curved recess.
Capacity approx. 24 l.
Mounting: With two screws through key holes and
one optional anti-theft hole in the back wall.
Delivery includes fixing material.
Weight, including single package: 3.8 kg
Suggested text for specifications:
Waste bin in stainless steel (AISI 304) for surface
mounting. All-stainless steel housing; visible surfaces
satin finished and brushed. Tapered front with verti-
cal curved recess. Capacity approx. 24 l. Delivery
includes fixing material.
Dimensions: 298 x 448 x 180 mm
Article No. L187
Available surfaces ID No.
satin finished (standard) 828 170
(coloured) plastic powder-coating 829 170
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
WASTE BIN PERFORATED WITH WALL RAIL L188 L
298 x 448 x 297 mm LINE
Capacity approx. 35 l
Waste bin with wall rail in robust, germ-reducing and
easy-care stainless steel (AISI 304).
All-stainless steel housing; visible surfaces satin fini-
shed and brushed.
Tapered front with vertical curved recess and 6 mm-
square perforations.
Capacity approx. 35 l. Accessible by pulling out on
the wall rail. Waste disposal from above through an
optional waste disposal ring or flap.
Mounting (wall rail): With four screws through key
holes and one optional anti-theft hole.
Delivery includes fixing material.
Weight, including single package: 5.8 kg
Also available without perforations upon request.
Suggested text for specifications:
Waste bin with wall rail in stainless steel (AISI 304)
for under-counter mounting. All-stainless steel
housing; visible surfaces satin finished and brushed.
Tapered front with vertical curved recess and 6 mm-
square perforations. Capacity approx. 35 l. Acces-
sible by pulling out on the wall rail. Waste disposal
from above through an optional waste disposal ring
or flap. Delivery includes fixing material.
Dimensions: 298 x 448 x 297 mm
Article No. L188
Options ID No.
Waste disposal ring WP159 727 080
Available surface ID No.
satin finished 828 140
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
WASTE BIN PERFORATED L190 L
298 x 450 x 510 mm LINE
Capacity approx. 43 l
Waste bin in robust, germ-reducing and easy-care
stainless steel (AISI 304).
All-stainless steel housing; visible surfaces satin fini-
shed and brushed.
Tapered front with vertical curved recess and 6 mm-
square perforations.
Equipped with removable mesh basket. Capacity
approx. 35 l. Accessible through lockable door.
Waste disposal from above through an optional waste
disposal ring or flap.
Keyed alike cylinder lock in corrosion-resistant zinc
die-casting.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and
one optional anti-theft hole in the back wall.
Delivery includes fixing material.
Weight, including single package: 8.0 kg
Also available without perforations upon request.
Suggested text for specifications:
Waste bin in stainless steel (AISI 304) for under-
counter mounting. All-stainless steel housing; visible
surfaces satin finished and brushed. Tapered front
with vertical curved recess and 6 mm-square per-
forations. Equipped with removable mesh basket.
Capacity approx. 35 l. Accessible through lockable
door. Waste disposal from above through an optio-
nal waste disposal ring or flap. Keyed alike cylinder
lock in corrosion-resistant zinc die-casting. Delivery
includes fixing material.
Dimensions: 298 x 450 x 510 mm
Article No. L190
Options ID No.
Waste disposal ring WP159 727 080
Available surface ID No.
satin finished 828 150
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
SINGLE HOOK PC215 P
Ø 45 x 36 mm LINE
Single hook in solid, germ-reducing and easy-care
stainless steel (AISI 303), satin finished.
Further available surfaces: see below.
Open two-point wall disc mounting.
Holder diameter 16 mm
Length 36 mm
Mounting: With two screws.
Delivery includes fixing material.
Weight, including single package: 0.1 kg
Suggested text for specifications:
Single hook in solid stainless steel (AISI 303), satin
finished, for surface mounting. Open two-point wall
disc mounting. Delivery includes fixing material.
Dimensions: Ø 45 x 36 mm
Article No. PC215
Available surfaces ID No.
satin finished (standard) 720 215
highly polished 735 215
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
RESERVE TOILET ROLL HOLDER PC222 P
Ø 45 x 80 mm LINE
Reserve toilet roll holder in solid, germ-reducing and
easy-care stainless steel (AISI 303), satin finished.
Further available surfaces: see below.
Designed for one standard toilet roll with dimensions:
Outer diameter max. 125 mm
Width max. 100 mm
Core diameter min. 38 mm
Open two-point wall disc mounting.
Holder diameter 16 mm
Length 80 mm
Mounting: With two screws.
Delivery includes fixing material.
Weight, including single package: 0.2 kg
Suggested text for specifications:
Reserve toilet roll holder in solid stainless steel
(AISI 303), satin finished, for surface mounting.
Open two-point wall disc mounting. Delivery inclu-
des fixing material.
Dimensions: Ø 45 x 80 mm
Article No. PC222
Available surfaces ID No.
satin finished (standard) 720 222
highly polished 735 222
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
TOILET ROLL HOLDER PC250 P
144 x 107 x 36 mm LINE
Toilet roll holder in solid, germ-reducing and easy-
care stainless steel Edelstahl (AISI 303), satin finished.
Further available surfaces: see below.
Designed for one standard toilet roll with dimensions:
Outer diameter max. 125 mm
Width max. 100 mm
Core diameter min. 38 mm
Open two-point wall disc mounting.
Can be mounted pointing right or left.
Holder diameter 16 mm
Roll holder diameter 8 mm
Mounting: With two screws.
Delivery includes fixing material.
Weight, including single package: 0.3 kg
Suggested text for specifications:
Toilet roll holder in solid stainless steel (AISI 303),
satin finished, for surface mounting. Open two-point
wall disc mounting. Can be mounted pointing right
or left. Delivery includes fixing material.
Dimensions: 144 x 107 x 36 mm
Article No. PC250
Available surfaces ID No.
satin finished (standard) 720 250
highly polished 735 250
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
TOILET BRUSH SET PC261 P
110 x 410 x 115 mm LINE
Toilet brush set in robust, germ-reducing and easy-care
stainless steel (AISI 304) for surface mounting.
Front panel with horizontal rounded edges. Visible
surfaces satin finished and brushed.
Further available surfaces: see below.
Brush head replaceable.
Cup with reservoir in polypropylene, removable.
Mounting: With four screws through key holes and
one optional anti-theft hole.
Delivery includes fixing material.
Weight, including single package: 1.4 kg
Suggested text for specifications:
Toilet brush set in stainless steel (AISI 304) for sur-
face mounting. Front panel with horizontal rounded
edges. Visible surfaces satin finished and brushed.
Brush head replaceable, cup with reservoir in poly-
propylene, removable. Delivery includes fixing mate-
rial.
Dimensions: 110 x 410 x 115 mm
Article No. PC261
Available surfaces ID No.
satin finished (standard) 720 261
highly polished 735 261
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
PAPER TOWEL DISPENSER PP13 P
298 x 298 x 120 mm LINE
approx. 500 paper towels
Paper towel dispenser in robust, germ-reducing and
easy-care stainless steel (AISI 304).
All-stainless steel housing with rounded vertical cor-
ners, open at the top. Visible surfaces satin finished
and brushed. Further available surfaces: see below.
Designed for approx. 500 standard paper towels in
zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Inspection slot to indicate fill level.
Refillable from the top.
Mounting: With three screws through key holes and
one optional anti-theft hole in the back wall.
Delivery includes fixing material.
Weight, including single package: 3.3 kg
Suggested text for specifications:
Paper towel dispenser in stainless steel (AISI 304)
for surface mounting. All-stainless steel housing with
rounded vertical corners, open at the top. Visible
surfaces satin finished and brushed. Filling quantity
approx. 500 paper towels. Inspection slot to indica-
te fill level. Refillable from the top. Delivery includes
fixing material.
Dimensions: 298 x 298 x 120 mm
Article No. PP13
Available surfaces ID No.
satin finished (standard) 727 280
highly polished 732 280
(coloured) plastic powder-coating 729 280
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
LIQUID SOAP DISPENSER PP17 P
70 x 172 x 90 mm LINE
200 ml soap tank
Liquid soap dispenser in robust, germ-reducing and
easy-care stainless steel (AISI 316L).
All-stainless steel housing with rounded vertical cor-
ners. Visible surfaces satin finished and brushed.
Further available surfaces: see below.
One-hand operated and non-drip soap pump with
200 ml tank.
Tank with large, lockable refill opening.
Designed for standard liquid soaps or hand lotions.
Inspection slot to indicate fill level.
Accessible for refilling through hinged housing.
With spring-clip locking.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and
one optional anti-theft hole in the back wall.
Delivery includes fixing material.
Weight, including single package: 0.8 kg
Suggested text for specifications:
Liquid soap dispenser in stainless steel (AISI 316L)
for surface mounting. All-stainless steel housing
with rounded vertical corners. Visible surfaces satin
finished and brushed. One-hand operated and non-
drip soap pump with 200 ml tank. Designed for
standard liquid soaps or hand lotions. Inspection slot
to indicate fill level. Accessible for refilling through
hinged housing. With spring-clip locking. Delivery
includes fixing material.
Dimensions: 70 x 172 x 90 mm
Article No. PP17
Available surfaces ID No.
satin finished (standard) 727 335
highly polished 731 335
(coloured) plastic powder-coating 728 335
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
LIQUID SOAP DISPENSER PP101 P
80 x 248 x 120 mm LINE
700 ml soap tank
Liquid soap dispenser in robust, germ-reducing and
easy-care stainless steel (AISI 316L).
All-stainless steel housing with rounded vertical cor-
ners. Visible surfaces satin finished and brushed.
Further available surfaces: see below.
One-hand operated and non-drip soap pump with
700 ml tank.
Tank with large, lockable refill opening.
Designed for standard liquid soaps or hand lotions.
Inspection slot to indicate fill level.
Accessible for refilling through lockable, hinged
housing.
Keyed alike cylinder lock in corrosion-resistant zinc
die-casting.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and
one optional anti-theft hole in the back wall.
Delivery includes fixing material.
Weight, including single package: 1.0 kg
Suggested text for specifications:
Liquid soap dispenser in stainless steel (AISI 316L)
for surface mounting. All-stainless steel housing
with rounded vertical corners. Visible surfaces satin
finished and brushed. One-hand operated and non-
drip soap pump with 700 ml tank. Designed for
standard liquid soaps or hand lotions. Inspection slot
to indicate fill level. Accessible for refilling through
lockable, hinged housing. Keyed alike cylinder lock
in corrosion-resistant zinc die-casting. Delivery inclu-
des fixing material.
Dimensions: 80 x 248 x 120 mm
Article No. PP101
Available surfaces ID No.
satin finished (standard) 727 337
highly polished 731 337
(coloured) plastic powder-coating 728 337
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
LIQUID SOAP DISPENSER PP102 P
80 x 298 x 120 mm LINE
1100 ml soap tank
Liquid soap dispenser in robust, germ-reducing and
easy-care stainless steel (AISI 316L).
All-stainless steel housing with rounded vertical cor-
ners. Visible surfaces satin finished and brushed.
Further available surfaces: see below.
One-hand operated and non-drip soap pump with
1100 ml tank.
Tank with large, lockable refill opening.
Designed for standard liquid soaps or hand lotions.
Inspection slot to indicate fill level.
Accessible for refilling through lockable, hinged
housing.
Keyed alike cylinder lock in corrosion-resistant zinc
die-casting.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and
one optional anti-theft hole in the back wall.
Delivery includes fixing material.
Weight, including single package: 1.1 kg
Suggested text for specifications:
Liquid soap dispenser in stainless steel (AISI 316L)
for surface mounting. All-stainless steel housing
with rounded vertical corners. Visible surfaces satin
finished and brushed. One-hand operated and non-
drip soap pump with 1100-mltank. Designed for
standard liquid soaps or hand lotions. Inspection slot
to indicate fill level. Accessible for refilling through
lockable, hinged housing. Keyed alike cylinder lock
in corrosion-resistant zinc die-casting. Delivery inclu-
des fixing material.
Dimensions: 80 x 298 x 120 mm
Article No. PP102
Available surfaces ID No.
satin finished (standard) 727 339
highly polished 731 339
(coloured) plastic powder-coating 728 339
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
DISINFECTANT DISPENSER PP102-7 P
80 x 298 x 120 mm LINE
950 ml tank
Disinfectant dispenser in robust, germ-reducing and
easy-care stainless steel (AISI 316L).
All-stainless steel housing with rounded vertical cor-
ners. Visible surfaces satin finished and brushed.
Further available surfaces: see below.
One-hand operated and non-drip disinfectant pump
with 950 ml tank.
Tank with large, lockable refill opening.
Designed for standard disinfectants.
Inspection slot to indicate fill level.
Accessible for refilling through lockable, hinged
housing.
Keyed alike cylinder lock in corrosion-resistant zinc
die-casting.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and
one optional anti-theft hole in the back wall.
Delivery includes fixing material.
Weight, including single package: 1.1 kg
Suggested text for specifications:
Disinfectant dispenser in stainless steel (AISI 316L)
for surface mounting. All-stainless steel housing
with rounded vertical corners. Visible surfaces satin
finished and brushed. One-hand operated and non-
drip disinfectant pump with 1100-mltank. Designed
for standard disinfectants. Inspection slot to indicate
fill level. Accessible for refilling through lockable,
hinged housing. Keyed alike cylinder lock in corrosi-
on-resistant zinc die-casting. Delivery includes fixing
material.
Dimensions: 80 x 298 x 120 mm
Article No. PP102-7
Available surfaces ID No.
satin finished (standard) 727 334
highly polished 731 334
(coloured) plastic powder-coating 728 334
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
FOAM SOAP DISPENSER PP103 P
80 x 298 x 120 mm LINE
400 ml foam soap concentrate
Foam soap dispenser in robust, germ-reducing and
easy-care stainless steel (AISI 316L).
All-stainless steel housing with rounded vertical cor-
ners. Visible surfaces satin finished and brushed.
Further available surfaces: see below.
One-hand operated and non-drip foam soap pump.
Designed for standard 400 ml foam soap concentrate.
Inspection slot to indicate fill level.
Accessible for refilling through lockable, hinged
housing.
Keyed alike cylinder lock in corrosion-resistant zinc
die-casting.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and
one optional anti-theft hole in the back wall.
Delivery includes fixing material and first fill with foam
soap concentrate.
Weight, including single package: 2.4 kg
Suggested text for specifications:
Foam soap dispenser in stainless steel (AISI 316L)
for surface mounting. All-stainless steel housing
with rounded vertical corners. Visible surfaces satin
finished and brushed. One-hand operated and
non-drip foam soap pump. Designed for standard
400 ml foam soap concentrate. Inspection slot to
indicate fill level. Accessible for refilling through
lockable, hinged housing. Keyed alike cylinder
lock in corrosion-resistant zinc die-casting. Delivery
includes fixing material and first fill with foam soap
concentrate.
Dimensions: 80 x 298 x 120 mm
Article No. PP103
Available surfaces ID No.
satin finished (standard) 727 338
highly polished 731 338
(coloured) plastic powder-coating 728 338
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
LIQUID SOAP DISPENSER PP107 P
70 x 172 x 90 mm LINE
200 ml soap tank
Liquid soap dispenser in robust, germ-reducing and
easy-care stainless steel (AISI 316L).
All-stainless steel housing with rounded vertical cor-
ners. Visible surfaces satin finished and brushed.
Further available surfaces: see below.
One-hand operated and non-drip soap pump with
200 ml tank.
Tank with large, lockable refill opening.
Designed for standard liquid soaps or hand lotions.
Inspection slot to indicate fill level.
Accessible for refilling through lockable, hinged
housing.
Keyed alike cylinder lock in corrosion-resistant zinc
die-casting.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and
one optional anti-theft hole in the back wall.
Delivery includes fixing material.
Weight, including single package: 0.8 kg
Suggested text for specifications:
Liquid soap dispenser in stainless steel (AISI 316L)
for surface mounting. All-stainless steel housing
with rounded vertical corners. Visible surfaces satin
finished and brushed. One-hand operated and non-
drip soap pump with 200 ml tank. Designed for
standard liquid soaps or hand lotions. Inspection slot
to indicate fill level. Accessible for refilling through
lockable, hinged housing. Keyed alike cylinder lock
in corrosion-resistant zinc die-casting. Delivery inclu-
des fixing material.
Dimensions: 70 x 172 x 90 mm
Article No. PP107
Available surfaces ID No.
satin finished (standard) 727 336
highly polished 731 336
(coloured) plastic powder-coating 728 336
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
PAPER TOWEL DISPENSER PP108 P
265 x 172 x 120 mm LINE
approx. 250 paper towels
Paper towel dispenser in robust, germ-reducing and
easy-care stainless steel (AISI 304).
All-stainless steel housing with rounded vertical corners.
Visible surfaces satin finished and brushed.
Further available surfaces: see below.
Designed for approx. 250 standard paper towels in
zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Inspection slot to indicate fill level.
Accessible for refilling through lockable, hinged
housing.
Keyed alike cylinder lock in corrosion-resistant zinc
die-casting.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and
one optional anti-theft hole in the back wall.
Delivery includes fixing material.
Weight, including single package: 2.0 kg
Suggested text for specifications:
Paper towel dispenser in stainless steel (AISI 304)
for surface mounting. All-stainless steel housing
with rounded vertical corners. Visible surfaces satin
finished and brushed. Filling quantity approx. 250
paper towels. Inspection slot to indicate fill level.
Accessible for refilling through lockable, hinged
housing. Keyed alike cylinder lock in corrosion-
resistant zinc die-casting. Delivery includes fixing
material.
Dimensions: 265 x 172 x 120 mm
Article No. PP108
Available surfaces ID No.
satin finished (standard) 727 530
highly polished 731 530
(coloured) plastic powder-coating 728 530
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
PAPER TOWEL DISPENSER PP111 P
265 x 448 x 120 mm LINE
approx. 750 paper towels
Paper towel dispenser in robust, germ-reducing and
easy-care stainless steel (AISI 304).
All-stainless steel housing with rounded vertical corners.
Visible surfaces satin finished and brushed.
Further available surfaces: see below.
Designed for approx. 750 standard paper towels in
zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Inspection slot to indicate fill level.
Accessible for refilling through lockable, hinged
housing.
Keyed alike cylinder lock in corrosion-resistant zinc
die-casting.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and
one optional anti-theft hole in the back wall.
Delivery includes fixing material.
Weight, including single package: 3.2 kg
Suggested text for specifications:
Paper towel dispenser in stainless steel (AISI 304)
for surface mounting. All-stainless steel housing
with rounded vertical corners. Visible surfaces satin
finished and brushed. Filling quantity approx. 750
paper towels. Inspection slot to indicate fill level.
Accessible for refilling through lockable, hinged
housing. Keyed alike cylinder lock in corrosion-
resistant zinc die-casting. Delivery includes fixing
material.
Dimensions: 265 x 448 x 120 mm
Article No. PP111
Available surfaces ID No.
satin finished (standard) 727 585
highly polished 731 585
(coloured) plastic powder-coating 728 585
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
PAPER TOWEL DISPENSER PP113 P
265 x 298 x 120 mm LINE
approx. 500 paper towels
Paper towel dispenser in robust, germ-reducing and
easy-care stainless steel (AISI 304).
All-stainless steel housing with rounded vertical corners.
Visible surfaces satin finished and brushed.
Further available surfaces: see below.
Designed for approx. 500 standard paper towels in
zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Inspection slot to indicate fill level.
Accessible for refilling through lockable, hinged
housing.
Keyed alike cylinder lock in corrosion-resistant zinc
die-casting.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and
one optional anti-theft hole in the back wall.
Delivery includes fixing material.
Weight, including single package: 2.3 kg
Suggested text for specifications:
Paper towel dispenser in stainless steel (AISI 304)
for surface mounting. All-stainless steel housing
with rounded vertical corners. Visible surfaces satin
finished and brushed. Filling quantity approx. 500
paper towels. Inspection slot to indicate fill level.
Accessible for refilling through lockable, hinged
housing. Keyed alike cylinder lock in corrosion-
resistant zinc die-casting. Delivery includes fixing
material.
Dimensions: 265 x 298 x 120 mm
Article No. PP113
Available surfaces ID No.
satin finished (standard) 727 540
highly polished 731 540
(coloured) plastic powder-coating 728 540
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de