COMBINATION SENSOR SOAP/PAPER WP550E A
400 x 298 x 120 mm LINE
500 ml sensor soap, 250 paper towels
Combination consisting of a sensor liquid soap dispenser and a paper
towel dispenser in robust, germ-reducing and easy-care stainless steel
(AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces satin
finished and brushed. Further available surfaces: see below.
Sensor liquid soap dispenser with EWAR® eModule touch-free operated
soap pump.
Designed for standard 500 ml disposable bottles of liquid soap or hand
lotion.
Paper towel dispenser with deep-drawn paper removal opening for easy
paper removal.
Designed for approx. 500 standard paper towels in zigzag fold. Paper
size (folded): 240-250 mm x 100-115 mm.
Inspection slots to indicate fill level.
Accessible for refilling through lockable front flap with fall protection.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
eModule battery-powered with two 1.5 V Baby/LR14 batteries.
Power supply available as an option.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and one optional anti-theft
hole in the back wall.
Delivery includes fixing material, batteries, first fill with soap and one
pack of paper towels.
Weight, including single package: 4.8 kg
Suggested text for specifications:
Combination consisting of a sensor liquid soap dispenser and a paper
towel dispenser in stainless steel (AISI 304) for surface mounting. All-
stainless steel housing; all corners fully welded, visible surfaces satin
finished and brushed. Sensor liquid soap dispenser with touch-free
operated soap pump. Designed for standard 500 ml disposable bottles
of liquid soap or hand lotion. Paper towel dispenser with deep-drawn
paper removal opening, filling quantity approx. 500 paper towels.
Inspection slots to indicate fill level. Accessible for refilling through
lockable front flap with fall protection. Keyed alike cylinder lock in
corrosion-resistant zinc die-casting. Delivery includes fixing material,
batteries, first fill with soap and one pack of paper towels.
Dimensions: 400 x 298 x 120 mm
Article No. WP550e
Options ID No.
Power supply for eModule 923 060
Available surfaces ID No.
satin finished (standard) 727 782
highly polished 731 782
(coloured) plastic powder-coating 728 782
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
HAND CARE COMBINATION A
SOAP/DISINFECTANT/LOTION WP575
LINE
298 x 298 x 121 mm
950 ml soap, 950 ml disinfectant, 950 ml lotion
Hand care combination consisting of a liquid soap-, disinfectant- and
lotion dispenser in robust, germ-reducing and easy-care stainless
steel (AISI 316L).
All-stainless steel housing; all corners fully welded, visible surfaces
satin finished and brushed.
Further available surfaces: see below.
Soap or lotion dispenser with one-hand operated and non-drip soap
or lotion pump.
Designed for standard 950 ml disposable bottles of liquid soap or
lotion. Also refillable with large container using the plug-in tank as
an option.
Disinfectant dispenser with one-hand operated disinfectant pump with
950 ml tank arranged in the middle.
Designed for standard disinfectants.
Inspection slots to indicate fill level.
Accessible for refilling through lockable, hinged housing.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and one optional anti-
theft hole in the back wall.
Delivery includes fixing material, first fill with soap and lotion.
Weight, including single package: 5.3 kg
Suggested text for specifications:
Hand care combination consisting of a liquid soap, disinfectant
and lotion dispenser in stainless steel (AISI 316L) for surface moun-
ting. All-stainless steel housing; all corners fully welded, visible
surfaces satin finished and brushed. Soap or lotion dispenser with
one-hand operated and non-drip soap or lotion pump. Designed
for standard 950 ml disposable bottles of liquid soap or lotion.
Disinfectant dispenser with one-hand operated disinfectant pump
with 950 ml tank arranged in the middle. Designed for standard
disinfectants. Inspection slots to indicate fill level. Accessible for
refilling through lockable, hinged housing. Keyed alike cylinder
lock in corrosion-resistant zinc die-casting. Delivery includes fixing
material, first fill with soap and lotion.
Dimensions: 298 x 298 x 121 mm
Article No. WP575
Options ID No.
Plug-in tank 937 201
Available surfaces
satin finished (standard) ID No.
highly polished 727 730
(coloured) plastic powder-coating 731 730
728 730
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
SENSOR HAND CARE COMBINATION A
SOAP/DISINFECTANT/LOTION WP575E
LINE
298 x 298 x 121 mm
Sensor 950 ml soap, 950 ml disinfectant, 950 ml lotion
Sensor hand care combination consisting of a sensor liquid soap-, dis-
infectant- and lotion dispenser in robust, germ-reducing and easy-care
stainless steel (AISI 316L).
All-stainless steel housing; all corners fully welded, visible surfaces
satin finished and brushed. Further available surfaces: see below.
Sensor soap or lotion dispenser with EWAR® eModule touch-free ope-
rated and non-drip soap and lotion pump.
Designed for standard 950 ml disposable bottles of liquid soap or
lotion. Also refillable with large container using the plug-in tank as an
option
Disinfectant dispenser with EWAR® eModule touch-free operated dis-
infectant pump with 950 ml tank arranged in the middle. Designed for
standard disinfectants.
Inspection slots to indicate fill level.
Accessible for refilling through lockable, hinged housing.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
eModule battery-powered with two 1.5 V Baby/LR14 batteries.
Power supply available as an option.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and one optional anti-
theft hole in the back wall.
Delivery includes fixing material, batteries and first fill with soap and
lotion.
Weight, including single package: 6.4 kg
Suggested text for specifications:
Sensor hand care combination consisting of a sensor liquid soap,
disinfectant and lotion dispenser in stainless steel (AISI 316L) for
surface mounting. All-stainless steel housing; all corners fully wel-
ded, visible surfaces satin finished and brushed. Sensor soap or
lotion dispenser with touch-free operated and non-drip soap or
lotion pump. Designed for standard 950 ml disposable bottles of
liquid soap or lotion. Sensor disinfectant dispenser with touch-free
operated disinfectant pump with 950 ml tank arranged in the midd-
le. Designed for standard disinfectants. Inspection slots to indicate
fill level. Accessible for refilling through lockable, hinged housing.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Delivery includes fixing material, batteries and first fill with soap
and lotion.
Dimensions: 298 x 298 x 121 mm
Article No. WP575e
Options ID No.
Plug-in tank 937 201
Power supply for eModule 923 060
Available surfaces ID No.
satin finished (standard) 727 735
highly polished 731 735
(coloured) plastic powder-coating 728 735
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
MIRROR CUPBOARD SOAP/PAPER WP600 A
450 x 450 x 130 mm LINE
950 ml soap, 500 paper towels
Mirror cupboard with integrated liquid soap dispenser and paper
towel dispenser in robust, germ-reducing and easy-care stainless steel
(AISI 304).
All-stainless steel housing; visible surfaces satin finished and brushed.
Crystal mirror with all round 2 mm chamfer and frosted window for
optional lighting set.
Liquid soap dispenser with one-hand operated and non-drip soap
pump.
Designed for standard 950 ml disposable bottles of liquid soap or
hand lotion.
Also refillable with large container using the plug-in tank as an opti-
on.
Paper towel dispenser with deep-drawn paper removal opening for
easy paper removal.
Designed for approx. 500 standard paper towels in zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Accessible for refilling through lockable door.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and one optional anti-
theft hole in the back wall.
Delivery includes fixing material, first fill with soap and one pack of
paper towels.
Weight, including single package: 11.5 kg
Suggested text for specifications:
Mirror cupboard with integrated liquid soap dispenser and paper
towel dispenser in stainless steel (AISI 304) for surface moun-
ting. All-stainless steel housing; visible surfaces satin finished and
brushed. Crystal mirror with all round 2 mm chamfer and frosted
window for optional lighting set. Liquid soap dispenser with one-
hand operated and non-drip soap pump. Designed for standard
950 ml disposable bottles of liquid soap or hand lotion. Paper
towel dispenser with deep-drawn paper removal opening, filling
quantity approx. 500 paper towels. Accessible for refilling through
lockable door. Keyed alike cylinder lock in corrosion-resistant zinc
die-casting. Delivery includes fixing material, first fill with soap and
one pack of paper towels.
Dimensions: 450 x 450 x 130 mm
Article No. WP600
Options ID No.
Lighting set 727 853
Available surface ID No.
satin finished 727 850
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
MIRROR CUPBOARD FOAM SOAP/PAPER WP600-5 A
450 x 450 x 130 mm LINE
400 ml foam soap, 500 paper towels
Mirror cupboard with integrated foam soap dispenser and paper
towel dispenser in robust, germ-reducing and easy-care stainless steel
(AISI 304).
All-stainless steel housing; visible surfaces satin finished and brushed.
Crystal mirror with all round 2 mm chamfer and frosted window for
optional lighting set.
Foam soap dispenser with one-hand operated and non-drip foam
soap pump.
Designed for standard 400 ml foam soap concentrate.
Paper towel dispenser with deep-drawn paper removal opening for
easy paper removal.
Designed for approx. 500 standard paper towels in zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Accessible for refilling through lockable door.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and one optional anti-
theft hole in the back wall.
Delivery includes fixing material, first fill with foam soap concentrate
and one pack of paper towels.
Weight, including single package: 11.0 kg
Suggested text for specifications:
Mirror cupboard with integrated foam soap dispenser and paper
towel dispenser in stainless steel (AISI 304) for surface moun-
ting. All-stainless steel housing; visible surfaces satin finished and
brushed. Crystal mirror with all round 2 mm chamfer and frosted
window for optional lighting set. Foam soap dispenser with one-
hand operated and non-drip foam soap pump. Designed for stan-
dard 400 ml foam soap concentrate. Paper towel dispenser with
deep-drawn paper removal opening, filling quantity approx. 500
paper towels. Accessible for refilling through lockable door. Keyed
alike cylinder lock in corrosion-resistant zinc die-casting. Delivery
includes fixing material, first fill with foam soap concentrate and
one pack of paper towels.
Dimensions: 450 x 450 x 130 mm
Article No. WP600-5
Options ID No.
Lighting set 727 853
Available surface ID No.
satin finished 727 852
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
MIRROR CUPBOARD SENSOR SOAP/PAPER WP600E A
450 x 450 x 130 mm LINE
950 ml sensor soap, 500 paper towels
Mirror cupboard with integrated sensor liquid soap dispenser and
paper towel dispenser in robust, germ-reducing and easy-care stainless
steel (AISI 304).
All-stainless steel housing; visible surfaces satin finished and brushed.
Crystal mirror with all round 2 mm chamfer and frosted window for
optional lighting set.
Sensor liquid soap dispenser with EWAR® eModule touch-free opera-
ted soap pump.
Designed for standard 950 ml disposable bottles of liquid soap or
hand lotion.
Also refillable with large container using the plug-in tank as an option.
Paper towel dispenser with deep-drawn paper removal opening for
easy paper removal.
Designed for approx. 500 standard paper towels in zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Accessible for refilling through lockable door.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
eModule battery-powered with two 1.5 V Baby/LR14 batteries.
Power supply available as an option.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and one optional anti-
theft hole in the back wall.
Delivery includes fixing material, batteries, first fill with soap and one
pack of paper towels.
Weight, including single package: 11.9 kg
Suggested text for specifications:
Mirror cupboard with integrated sensor liquid soap dispenser and
paper towel dispenser in stainless steel (AISI 304) for surface moun-
ting. All-stainless steel housing; visible surfaces satin finished and
brushed. Crystal mirror with all round 2 mm chamfer and frosted
window for optional lighting set. Sensor liquid soap dispenser with
touch-free operated soap pump. Designed for standard 950 ml
disposable bottles of liquid soap or hand lotion. Paper towel dis-
penser with deep-drawn paper removal opening, filling quantity
approx. 500 paper towels. Accessible for refilling through lockable
door. Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Delivery includes fixing material, batteries, first fill with soap and one
pack of paper towels.
Dimensions: 450 x 450 x 130 mm
Article No. WP600e
Options ID No.
Power supply for eModule 923 060
Lighting set 727 853
Available surface ID No.
satin finished 727 851
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
STAINLESS STEEL MIRROR WP601 A
600 x 600 x 1 mm LINE
Mirror in robust, germ-reducing and easy-care stain-
less steel mirror sheet metal (AISI 304).
Mounting: With four Torx® locking screws.
Delivery includes fixing material.
Weight, including single package: 2.9 kg
Other dimensions available upon request.
Suggested text for specifications:
Mirror in stainless steel mirror sheet metal (AISI 304)
for surface mounting. Delivery includes four Torx®
locking screws.
Dimensions: 600 x 600 x 1 mm
Article No. WP601
Available surface ID No.
Mirror sheet metal 727 855
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
STAINLESS STEEL MIRROR WP602 A
600 x 400 x 1 mm LINE
Mirror in robust, germ-reducing and easy-care stain-
less steel mirror sheet metal (AISI 304).
Mounting: With four Torx® locking screws.
Delivery includes fixing material.
Weight, including single package: 2.0 kg
Other dimensions available upon request.
Suggested text for specifications:
Mirror in stainless steel mirror sheet metal (AISI 304)
for surface mounting. Delivery includes four Torx®
locking screws.
Dimensions: 600 x 400 x 1 mm
Article No. WP602
Available surface ID No.
Mirror sheet metal 727 865
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
STAINLESS STEEL MIRROR WP603 A
800 x 400 x 1 mm LINE
Mirror in robust, germ-reducing and easy-care stain-
less steel mirror sheet metal (AISI 304).
Mounting: With four Torx® locking screws.
Delivery includes fixing material.
Weight, including single package: 2.7 kg
Other dimensions available upon request.
Suggested text for specifications:
Mirror in stainless steel mirror sheet metal (AISI 304)
for surface mounting. Delivery includes four Torx®
locking screws.
Dimensions: 800 x 400 x 1 mm
Article No. WP603
Available surface ID No.
Mirror sheet metal 727 870
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
STAINLESS STEEL MIRROR WP604 A
700 x 500 x 1 mm LINE
Mirror in robust, germ-reducing and easy-care stain-
less steel mirror sheet metal (AISI 304).
Mounting: With four Torx® locking screws.
Delivery includes fixing material.
Weight, including single package: 2.8 kg
Other dimensions available upon request.
Suggested text for specifications:
Mirror in stainless steel mirror sheet metal (AISI 304)
for surface mounting. Delivery includes four Torx®
locking screws.
Dimensions: 700 x 500 x 1 mm
Article No. WP604
Available surface ID No.
Mirror sheet metal 727 875
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
COMBINATION PAPER/WASTE WP610 A
298 x 1198 x 140 mm LINE
750 paper towels, 13 l waste bin
Combination consisting of a paper towel dispenser and a
waste bin in robust, germ-reducing and easy-care stainless
steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible
surfaces satin finished and brushed.
Further available surfaces: see below.
Can be installed flush with wall or tiles.
Paper towel dispenser with deep-drawn paper removal ope-
ning for easy paper removal.
Designed for approx. 750 standard paper towels in zigzag
fold. Paper size (folded): 240-250 mm x 100-115 mm.
Waste bin equipped with removable mesh basket. Capacity
approx. 13 l.
Accessible through lockable, continuous, double-skin door.
Keyed alike cylinder lock in corrosion-resistant zinc die-
casting.
Wear parts and front panels can be replaced as modules.
Installation dimensions: 300 x 1200 x 140 mm
Mounting: With four screws in wall opening through fixing
holes in the side walls.
Delivery includes fixing material and one pack of paper
towels.
Weight, including single package: 18.2 kg
Suggested text for specifications:
Combination consisting of a paper towel dispenser and a
waste bin in stainless steel (AISI 304) for flush mounting
to wall or tiles. All-stainless steel housing; all corners fully
welded, visible surfaces satin finished and brushed. Paper
towel dispenser with deep-drawn paper removal ope-
ning, filling quantity approx. 750 paper towels. Waste
bin equipped with removable mesh basket. Capacity
approx. 13 l. Accessible through lockable, continuous,
double-skin door. Keyed alike cylinder lock in corrosion-
resistant zinc die-casting. Delivery includes fixing material
and one pack of paper towels.
Dimensions: 298 x 1198 x 140 mm
Article No. WP610
Available surfaces ID No.
satin finished (standard) 769 049
highly polished 731 049
(coloured) plastic powder-coating 728 135
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
COMBINATION PAPER/WASTE WP612 A
298 x 748 x 140 mm LINE
250 paper towels, 7 l waste bin
Combination consisting of a paper towel dispenser and a
waste bin in robust, germ-reducing and easy-care stainless
steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible
surfaces satin finished and brushed.
Further available surfaces: see below.
Can be installed flush with wall or tiles.
Paper towel dispenser with deep-drawn paper removal ope-
ning for easy paper removal.
Designed for approx. 250 standard paper towels in zigzag
fold. Paper size (folded): 240-250 mm x 100-115 mm.
Waste bin equipped with removable mesh basket. Capacity
approx. 7 l.
Accessible through lockable, continuous, double-skin door.
Keyed alike cylinder lock in corrosion-resistant zinc die-
casting.
Wear parts and front panels can be replaced as modules.
Installation dimensions: 300 x 750 x 140 mm
Mounting: With four screws in wall opening through fixing
holes in the side walls.
Delivery includes fixing material and one pack of paper
towels.
Weight, including single package: 11.7 kg
Suggested text for specifications:
Combination consisting of a paper towel dispenser and a
waste bin in stainless steel (AISI 304) for flush mounting
to wall or tiles. All-stainless steel housing; all corners fully
welded, visible surfaces satin finished and brushed. Paper
towel dispenser with deep-drawn paper removal ope-
ning, filling quantity approx. 250 paper towels. Waste
bin equipped with removable mesh basket. Capacity
approx. 7 l. Accessible through lockable, continuous,
double-skin door. Keyed alike cylinder lock in corrosion-
resistant zinc die-casting. Delivery includes fixing material
and one pack of paper towels.
Dimensions: 298 x 748 x 140 mm
Article No. WP612
Available surfaces ID No.
satin finished (standard) 769 040
highly polished 732 040
(coloured) plastic powder-coating 769 060
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
MIRROR CUPBOARD SOAP/PAPER WP650 A
600 x 600 x 130 mm LINE
950 ml soap, 750 paper towels ID No.
727 893
Mirror cupboard with integrated liquid soap dispenser and
paper towel dispenser in robust, germ-reducing and easy-
care stainless steel (AISI 304).
All-stainless steel housing; visible surfaces satin finished and
brushed.
Crystal mirror with all round 2 mm chamfer and frosted win-
dow for optional lighting set.
Liquid soap dispenser with one-hand operated and non-drip
soap pump.
Designed for standard 950 ml disposable bottles of liquid
soap or hand lotion.
Also refillable with large container using the plug-in tank as
an option.
Paper towel dispenser with deep-drawn paper removal ope-
ning for easy paper removal.
Designed for approx. 750 standard paper towels in zigzag
fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Accessible for refilling through lockable door.
Keyed alike cylinder lock in corrosion-resistant zinc die-
casting.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and one
optional anti-theft hole in the back wall.
Delivery includes fixing material, first fill with soap and one
pack of paper towels.
Weight, including single package: 19.4 kg
Suggested text for specifications:
Mirror cupboard with integrated liquid soap dispenser
and paper towel dispenser in stainless steel (AISI 304)
for surface mounting. All-stainless steel housing; visible
surfaces satin finished and brushed. Crystal mirror with
all round 2 mm chamfer and frosted window for optional
lighting set. Liquid soap dispenser with one-hand ope-
rated and non-drip soap pump. Designed for standard
950 ml disposable bottles of liquid soap or hand lotion.
Paper towel dispenser with deep-drawn paper removal
opening, filling quantity approx. 750 paper towels.
Accessible for refilling through lockable door. Keyed alike
cylinder lock in corrosion-resistant zinc die-casting. Deli-
very includes fixing material, first fill with soap and one
pack of paper towels.
Dimensions: 600 x 600 x 130 mm
Article No. WP650
Available surface ID No. Options
satin finished 727 890 Lighting set
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
MIRROR CUPBOARD FORAM SOAP/PAPER WP650-5 A
600 x 600 x 130 mm LINE
400 ml foam soap, 750 paper towels
Mirror cupboard with integrated foam soap dispenser and
paper towel dispenser in robust, germ-reducing and easy-
care stainless steel (AISI 304).
All-stainless steel housing; visible surfaces satin finished and
brushed.
Crystal mirror with all round 2 mm chamfer and frosted win-
dow for optional lighting set.
Foam soap dispenser with one-hand operated and non-drip
foam soap pump.
Designed for standard 400 ml foam soap concentrate.
Paper towel dispenser with deep-drawn paper removal ope-
ning for easy paper removal.
Designed for approx. 750 standard paper towels in zigzag
fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Accessible for refilling through lockable door.
Keyed alike cylinder lock in corrosion-resistant zinc die-
casting.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and one
optional anti-theft hole in the back wall.
Delivery includes fixing material, first fill with foam soap
concentrate and one pack of paper towels.
Weight, including single package: 18.9 kg
Suggested text for specifications:
Mirror cupboard with integrated foam soap dispenser
and paper towel dispenser in stainless steel (AISI 304)
for surface mounting. All-stainless steel housing; visible
surfaces satin finished and brushed. Crystal mirror with
all round 2 mm chamfer and frosted window for optional
lighting set. Foam soap dispenser with one-hand operated
and non-drip foam soap pump. Designed for standard
400 ml foam soap concentrate. Paper towel dispenser
with deep-drawn paper removal opening, filling quantity
approx. 750 paper towels. Accessible for refilling through
lockable door. Keyed alike cylinder lock in corrosion-
resistant zinc die-casting. Delivery includes fixing materi-
al, first fill with foam soap concentrate and one pack of
paper towels.
Dimensions: 600 x 600 x 130 mm
Article No. WP650-5
Available surface ID No. Options ID No.
satin finished 727 892 Lighting set 727 893
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
MIRROR CUPBOARD SENSOR SOAP/PAPER WP650E A
600 x 600 x 130 mm LINE
950 ml sensor soap, 750 paper towels ID No.
923 060
Mirror cupboard with integrated sensor liquid soap dispen- 727 893
ser and paper towel dispenser in robust, germ-reducing and
easy-care stainless steel (AISI 304).
All-stainless steel housing; visible surfaces satin finished and
brushed.
Crystal mirror with all round 2 mm chamfer and frosted win-
dow for optional lighting set.
Sensor liquid soap dispenser with EWAR® eModule touch-
free operated soap pump.
Designed for standard 950 ml disposable bottles of liquid
soap or hand lotion.
Also refillable with large container using the plug-in tank as
an option.
Paper towel dispenser with deep-drawn paper removal ope-
ning for easy paper removal.
Designed for approx. 750 standard paper towels in zigzag
fold. Paper size (folded): 240-250 mm x 100-115 mm.
Accessible for refilling through lockable door.
Keyed alike cylinder lock in corrosion-resistant zinc die-
casting.
eModule battery-powered with two 1.5 V Baby/LR14 batte-
ries.
Power supply available as an option.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and one
optional anti-theft hole in the back wall.
Delivery includes fixing material, batteries, first fill with
soap and one pack of paper towels.
Weight, including single package: 19.8 kg
Suggested text for specifications:
Mirror cupboard with integrated sensor liquid soap
dispenser and paper towel dispenser in stainless steel
(AISI 304) for surface mounting. All-stainless steel
housing; visible surfaces satin finished and brushed.
Crystal mirror with all round 2 mm chamfer and frosted
window for optional lighting set. Sensor liquid soap dis-
penser with touch-free operated soap pump. Designed
for standard 950 ml disposable bottles of liquid soap
or hand lotion. Paper towel dispenser with deep-drawn
paper removal opening, filling quantity approx. 750
paper towels. Accessible for refilling through lockable
door. Keyed alike cylinder lock in corrosion-resistant zinc
die-casting. Delivery includes fixing material, batteries,
first fill with soap and one pack of paper towels.
Dimensions: 600 x 600 x 130 mm
Article No. WP650e
Options
Available surface ID No. Power supply for eModule
satin finished 727 891 Lighting set
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
HOT AIR HAND DRYER WP1100 A
LINE
298 x 396 x 150 mm
Hot air hand dryer in robust, germ-reducing and easy-
care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded,
visible surfaces satin finished and brushed with tapered
glossy surface IIID at the bottom.
Further available surfaces: see below.
Touch-free, low-failure capacitive sensor technology,
sensor distance 0–30 cm, power cut-off after 30 s
drying time.
Low noise.
SEV-tested and certified.
Supply voltage 230 V, 50 Hz
Power rating 2000 Watt
Heater power 1915 Watt
Motor power 85 Watt
Air output 258 m³/h
Blower unit can be replaced as module.
Mounting: With four screws through key holes and
one optional anti-theft hole in the back wall.
Delivery includes fixing material and device plug.
Weight, including single package: 7.2 kg
Suggested text for specifications:
Hot air hand dryer in stainless steel (AISI 304) for
surface mounting. All-stainless steel housing; all
corners fully welded, visible surfaces satin finished
and brushed with tapered glossy surface IIID at the
bottom. Low noise blower unit with capacitive sensor
technology, sensor distance 0-30 cm, drying time
30 s factory setting, can be replaced as module.
Power rating 2000 W. SEV-tested and certified. Deli-
very includes fixing material and device plug, mains
cable supply on site 230 V/50 Hz.
Dimensions: 298 x 396 x 150 mm
Article No. WP1100
Available surfaces ID No.
satin finished (standard) 733 010
highly polished 731 010
(coloured) plastic powder-coating 729 010
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
HOT AIR HAND DRYER WP1200 A
LINE
298 x 396 x 150 mm
Hot air hand dryer in robust, germ-reducing and easy-
care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded,
visible surfaces satin finished and brushed with tapered
glossy surface IIID at the bottom.
Further available surfaces: see below.
Touch-free, low-failure capacitive sensor technology,
sensor distance 0–30 cm, power cut-off after 30 s
drying time.
Low noise.
SEV-tested and certified.
Supply voltage 230 V, 50 Hz
Power rating 2000 Watt
Heater power 1915 Watt
Motor power 85 Watt
Air output 258 m³/h
Blower unit can be replaced as module.
Installation dimensions: 300 x 398 x 65 mm
Mounting: With four screws in wall opening through
fixing holes in the side walls.
Delivery includes fixing material and device plug.
Weight, including single package: 7.2 kg
Suggested text for specifications:
Hot air hand dryer in stainless steel (AISI 304)
for flush mounting. All-stainless steel housing; all
corners fully welded, visible surfaces satin finished
and brushed with tapered glossy surface IIID at the
bottom. Low noise blower unit with capacitive sensor
technology, sensor distance 0-30 cm, drying time
30 s factory setting, can be replaced as module.
Power rating 2000 W. SEV-tested and certified. Deli-
very includes fixing material and device plug, mains
cable supply on site 230 V/50 Hz.
Dimensions: 298 x 396 x 150 mm
Article No. WP1200
Available surfaces ID No.
satin finished (standard) 733 020
highly polished 731 020
(coloured) plastic powder-coating 728 020
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
SENSOR PAPER ROLL DISPENSER WP1300 A
350 x 448 x 210 mm LINE
Mains-operated
Sensor paper roll dispenser, mains-operated, in robust, germ-redu-
cing and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces
satin finished and brushed with tapered glossy surface IIID at the bot-
tom.
Further available surfaces: see below.
With touch-free operated, capacitive sensor technology, sensor
distance approx. 3.5 cm. Paper length and idle time adjustable.
Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable
on site. TÜV/GS-tested and certified.
Designed for one paper roll with dimensions:
Width 215 mm, outer diameter max. 180 mm,
inner diameter 50 mm.
Inspection slot to indicate fill level, residual roll function allows a
reserve roll to be inserted before residual roll is completely used up.
Accessible for refilling through lockable door.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes in the back wall.
Delivery includes fixing material and first fill with one paper roll.
Weight, including single package: 10.3 kg
Suggested text for specifications:
Sensor paper roll dispenser, mains-operated, in stainless steel
(AISI 304) for surface mounting. All-stainless steel housing; all
corners fully welded, visible surfaces satin finished and brushed
with tapered glossy surface IIID at the bottom. With touch-free
operated, capacitive sensor technology. Paper length and idle time
adjustable. Mains-operated 230 V / 50 Hz; power rating 7 Watt;
mains cable on site. TÜV/GS-tested and certified. Designed for one
paper roll with dimensions: Width 215 mm, outer diameter max.
180 mm, inner diameter 50 mm. Inspection slot to indicate fill level.
Accessible for refilling through lockable door. Residual roll function
allows a reserve roll to be inserted before residual roll is comple-
tely used up. Keyed alike cylinder lock in corrosion-resistant zinc
die-casting. Delivery includes fixing material and first fill with one
paper roll.
Dimensions: 350 x 448 x 210 mm
Article No. WP1300
Available surfaces ID No.
satin finished (standard) 733 210
highly polished 731 210
(coloured) plastic powder-coating 729 210
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
SENSOR PAPER ROLL DISPENSER WP1301 A
350 x 448 x 210 mm LINE
Battery-powered
Sensor paper roll dispenser, battery-powered, in robust, germ-redu-
cing and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces
satin finished and brushed with tapered glossy surface IIID at the bot-
tom. Further available surfaces: see below.
With touch-free operated, capacitive sensor technology, sensor
distance approx. 3.5 cm. Paper length and idle time adjustable.
Battery-powered with four standard 1.5 V Mono/LR20/12 A batte-
ries.
Designed for one paper roll with dimensions: Width 215 mm, outer
diameter max. 180 mm, inner diameter 50 mm.
Inspection slot to indicate fill level, residual roll function allows a
reserve roll to be inserted before residual roll is completely used up.
Accessible for refilling through lockable door.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes in the back wall.
Delivery includes fixing material and first fill with one paper roll.
Weight, including single package: 10.3 kg
Suggested text for specifications:
Sensor paper roll dispenser, battery-powered, in stainless steel
(AISI 304) for surface mounting. All-stainless steel housing; all cor-
ners fully welded, visible surfaces satin finished and brushed with
tapered glossy surface IIID at the bottom. With touch-free opera-
ted, capacitive sensor technology. Paper length and idle time adju-
stable. Battery-powered with four standard 1.5 V Mono/LR20/12 A
batteries. Designed for one paper roll with dimensions: Width 215
mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspec-
tion slot to indicate fill level. Accessible for refilling through lockab-
le door. Residual roll function allows a reserve roll to be inserted
before residual roll is completely used up. Keyed alike cylinder lock
in corrosion-resistant zinc die-casting. Delivery includes fixing mate-
rial and first fill with one paper roll.
Dimensions: 350 x 448 x 210 mm
Article No. WP1301
Available surfaces ID No.
satin finished (standard) 733 220
highly polished 730 220
(coloured) plastic powder-coating 729 220
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
SENSOR PAPER ROLL DISPENSER WP1310 A
350 x 448 x 210 mm LINE
Mains-operated
Sensor paper roll dispenser, mains-operated, in robust, germ-reducing
and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces
satin finished and brushed with tapered glossy surface IIID at the bot-
tom. Further available surfaces: see below.
With touch-free operated, capacitive sensor technology, sensor
distance approx. 3.5 cm. Paper length and idle time adjustable.
Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable
on site. TÜV/GS-tested and certified.
Designed for one paper roll with dimensions: Width 215 mm, outer
diameter max. 180 mm, inner diameter 50 mm.
Inspection slot to indicate fill level, residual roll function allows a
reserve roll to be inserted before residual roll is completely used up.
Accessible for refilling through lockable door.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Wear parts and front panels can be replaced as modules.
Installation dimensions: 352 x 450 x 180 mm
Mounting: With four screws in wall opening through fixing holes in
the side walls.
Delivery includes fixing material and first fill with one paper roll.
Weight, including single package: 10.3 kg
Suggested text for specifications:
Sensor paper roll dispenser, mains-operated, in stainless steel
(AISI 304) for flush mounting. All-stainless steel housing; all cor-
ners fully welded, visible surfaces satin finished and brushed with
tapered glossy surface IIID at the bottom. With touch-free ope-
rated, capacitive sensor technology. Paper length and idle time
adjustable. Mains-operated 230 V / 50 Hz; power rating 7 Watt;
mains cable on site. TÜV/GS-tested and certified. Designed for one
paper roll with dimensions: Width 215 mm, outer diameter max.
180 mm, inner diameter 50 mm. Inspection slot to indicate fill level.
Accessible for refilling through lockable door. Residual roll function
allows a reserve roll to be inserted before residual roll is comple-
tely used up. Keyed alike cylinder lock in corrosion-resistant zinc
die-casting. Delivery includes fixing material and first fill with one
paper roll.
Dimensions: 350 x 448 x 210 mm
Article No. WP1310
Available surfaces ID No.
satin finished (standard) 733 230
highly polished 732 230
(coloured) plastic powder-coating 729 230
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
SENSOR PAPER ROLL DISPENSER WP1311 A
350 x 448 x 210 mm LINE
Battery-powered
Sensor paper roll dispenser, battery-powered, in robust, germ-reducing
and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces
satin finished and brushed with tapered glossy surface IIID at the bot-
tom. Further available surfaces: see below.
With touch-free operated, capacitive sensor technology, sensor
distance approx. 3.5 cm. Paper length and idle time adjustable.
Battery-powered with four standard 1.5 V Mono/LR20/12 A batte-
ries.
Designed for one paper roll with dimensions: Width 215 mm, outer
diameter max. 180 mm, inner diameter 50 mm.
Inspection slot to indicate fill level, residual roll function allows a
reserve roll to be inserted before residual roll is completely used up.
Accessible for refilling through lockable door.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Wear parts and front panels can be replaced as modules.
Installation dimensions: 352 x 450 x 180 mm
Mounting: With four screws in wall opening through fixing holes in
the side walls.
Delivery includes fixing material and first fill with one paper roll.
Weight, including single package: 10.3 kg
Suggested text for specifications:
Sensor paper roll dispenser, battery-powered, in stainless steel
(AISI 304) for flush mounting. All-stainless steel housing; all corners
fully welded, visible surfaces satin finished and brushed with tape-
red glossy surface IIID at the bottom. With touch-free operated,
capacitive sensor technology. Paper length and idle time adjustab-
le. Battery-powered with four standard 1.5 V Mono/LR20/12 A
batteries. Designed for one paper roll with dimensions: Width 215
mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspec-
tion slot to indicate fill level. Accessible for refilling through lockab-
le door. Residual roll function allows a reserve roll to be inserted
before residual roll is completely used up. Keyed alike cylinder lock
in corrosion-resistant zinc die-casting. Delivery includes fixing mate-
rial and first fill with one paper roll.
Dimensions: 350 x 448 x 210 mm
Article No. WP1311
Available surfaces ID No.
satin finished (standard) 733 240
highly polished 731 240
(coloured) plastic powder-coating 728 240
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
SENSOR PAPER ROLL DISPENSER WP1400 A
350 x 580 x 210 mm LINE
Mains-operated
Sensor paper roll dispenser with cabinet for reserve roll, mains-
operated, in robust, germ-reducing and easy-care stainless steel
(AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces
satin finished and brushed with tapered glossy surface IIID at the bot-
tom.
Further available surfaces: see below.
With touch-free operated, capacitive sensor technology, sensor
distance approx. 3.5 cm. Paper length and idle time adjustable.
Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable
on site. TÜV/GS-tested and certified.
Designed for one paper roll and one reserve roll with dimensions:
Width 215 mm, outer diameter max. 180 mm, inner diameter 50
mm.
Inspection slot to indicate fill level, residual roll function allows a
reserve roll to be inserted before residual roll is completely used up.
Accessible for refilling through lockable door.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes in the back wall.
Delivery includes fixing material and first fill with one paper roll.
Weight, including single package: 12.4 kg
Suggested text for specifications:
Sensor paper roll dispenser with cabinet for reserve roll, mains-
operated, in stainless steel (AISI 304) for surface mounting. All-
stainless steel housing; all corners fully welded, visible surfaces
satin finished and brushed with tapered glossy surface IIID at the
bottom. With touch-free operated, capacitive sensor technology.
Paper length and idle time adjustable. Mains-operated 230 V /
50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-tested
and certified. Designed for one paper roll and one reserve roll with
dimensions: Width 215 mm, outer diameter max. 180 mm, inner
diameter 50 mm. Inspection slot to indicate fill level. Accessible
for refilling through lockable door. Residual roll function allows a
reserve roll to be inserted before residual roll is completely used
up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Delivery includes fixing material and first fill with one paper roll.
Dimensions: 350 x 580 x 210 mm
Article No. WP1400
Available surfaces ID No.
satin finished (standard) 733 250
highly polished 732 250
(coloured) plastic powder-coating 728 250
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
SENSOR PAPER ROLL DISPENSER WP1401 A
350 x 580 x 210 mm LINE
Battery-powered
Sensor paper roll dispenser with cabinet for reserve roll, battery-
powered, in robust, germ-reducing and easy-care stainless steel
(AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces
satin finished and brushed with tapered glossy surface IIID at the bot-
tom. Further available surfaces: see below.
With touch-free operated, capacitive sensor technology, sensor
distance approx. 3.5 cm.
Paper length and idle time adjustable.
Battery-powered with four standard 1.5 V Mono/LR20/12 A batte-
ries.
Designed for one paper roll and one reserve roll with dimensions:
Width 215 mm, outer diameter max. 180 mm, inner diameter 50
mm.
Inspection slot to indicate fill level, residual roll function allows a
reserve roll to be inserted before residual roll is completely used up.
Accessible for refilling through lockable door.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes in the back wall.
Delivery includes fixing material and first fill with one paper roll.
Weight, including single package: 12.4 kg
Suggested text for specifications:
Sensor paper roll dispenser with cabinet for reserve roll, battery-
powered, in stainless steel (AISI 304) for surface mounting. All-
stainless steel housing; all corners fully welded, visible surfaces
satin finished and brushed with tapered glossy surface IIID at the
bottom. With touch-free operated, capacitive sensor technology.
Paper length and idle time adjustable. Battery-powered with four
standard 1.5 V Mono/LR20/12 A batteries. Designed for one
paper roll and one reserve roll with dimensions: Width 215 mm,
outer diameter max. 180 mm, inner diameter 50 mm. Inspection
slot to indicate fill level. Accessible for refilling through lockable
door. Residual roll function allows a reserve roll to be inserted
before residual roll is completely used up. Keyed alike cylinder lock
in corrosion-resistant zinc die-casting. Delivery includes fixing mate-
rial and first fill with one paper roll.
Dimensions: 350 x 580 x 210 mm
Article No. WP1401
Available surfaces ID No.
satin finished (standard) 733 260
highly polished 732 260
(coloured) plastic powder-coating 728 260
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
SENSOR PAPER ROLL DISPENSER WP1410 A
350 x 580 x 210 mm LINE
Mains-operated
Sensor paper roll dispenser with cabinet for reserve roll, mains-
operated, in robust, germ-reducing and easy-care stainless steel
(AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces
satin finished and brushed with tapered glossy surface IIID at the bot-
tom. Further available surfaces: see below.
With touch-free operated, capacitive sensor technology, sensor
distance approx. 3.5 cm. Paper length and idle time adjustable.
Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable
on site.
TÜV/GS-tested and certified.
Designed for one paper roll and one reserve roll with dimensions:
Width 215 mm, outer diameter max. 180 mm,
inner diameter 50 mm.
Inspection slot to indicate fill level, residual roll function allows a
reserve roll to be inserted before residual roll is completely used up.
Accessible for refilling through lockable door.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Wear parts and front panels can be replaced as modules.
Installation dimensions: 352 x 582 x 180 mm
Mounting: With four screws in wall opening through fixing holes in
the side walls.
Delivery includes fixing material and first fill with one paper roll.
Weight, including single package: 12.4 kg
Suggested text for specifications:
Sensor paper roll dispenser with cabinet for reserve roll, mains-ope-
rated, in stainless steel (AISI 304) for flush mounting. All-stainless
steel housing; all corners fully welded, visible surfaces satin finished
and brushed with tapered glossy surface IIID at the bottom. With
touch-free operated, capacitive sensor technology. Paper length
and idle time adjustable. Mains-operated 230 V / 50 Hz; power
rating 7 Watt; mains cable on site. TÜV/GS-tested and certified.
Designed for one paper roll and one reserve roll with dimensions:
Width 215 mm, outer diameter max. 180 mm, inner diameter 50
mm. Inspection slot to indicate fill level. Accessible for refilling
through lockable door. Residual roll function allows a reserve roll to
be inserted before residual roll is completely used up. Keyed alike
cylinder lock in corrosion-resistant zinc die-casting. Delivery inclu-
des fixing material and first fill with one paper roll.
Dimensions: 350 x 580 x 210 mm
Article No. WP1410
Available surfaces ID No.
satin finished (standard) 733 270
highly polished 732 270
(coloured) plastic powder-coating 728 270
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
SENSOR PAPER ROLL DISPENSER WP1411 A
350 x 580 x 210 mm LINE
Battery-powered
Sensor paper roll dispenser with cabinet for reserve roll, battery-
powered, in robust, germ-reducing and easy-care stainless steel
(AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces
satin finished and brushed with tapered glossy surface IIID at the bot-
tom. Further available surfaces: see below.
With touch-free operated, capacitive sensor technology, sensor
distance approx. 3.5 cm.
Paper length and idle time adjustable.
Battery-powered with four standard 1.5 V Mono/LR20/12 A batte-
ries.
Designed for one paper roll and one reserve roll with dimensions:
Width 215 mm, outer diameter max. 180 mm,
inner diameter 50 mm.
Inspection slot to indicate fill level, residual roll function allows a
reserve roll to be inserted before residual roll is completely used up.
Accessible for refilling through lockable door.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Wear parts and front panels can be replaced as modules.
Installation dimensions: 352 x 582 x 180 mm
Mounting: With four screws in wall opening through fixing holes in
the side walls.
Delivery includes fixing material and first fill with one paper roll.
Weight, including single package: 12.4 kg
Suggested text for specifications:
Sensor paper roll dispenser with cabinet for reserve roll, battery-
powered, in stainless steel (AISI 304) for flush mounting. All-
stainless steel housing; all corners fully welded, visible surfaces
satin finished and brushed with tapered glossy surface IIID at the
bottom. With touch-free operated, capacitive sensor technology.
Paper length and idle time adjustable. Battery-powered with four
standard 1.5 V Mono/LR20/12 A batteries. Designed for one
paper roll and one reserve roll with dimensions: Width 215 mm,
outer diameter max. 180 mm, inner diameter 50 mm. Inspection
slot to indicate fill level. Accessible for refilling through lockable
door. Residual roll function allows a reserve roll to be inserted
before residual roll is completely used up. Keyed alike cylinder lock
in corrosion-resistant zinc die-casting. Delivery includes fixing mate-
rial and first fill with one paper roll.
Dimensions: 350 x 580 x 210 mm
Article No. WP1411
Available surfaces ID No.
satin finished (standard) 733 280
highly polished 731 280
(coloured) plastic powder-coating 728 280
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
NAPPY CHANGER WP2010 A
900 x 566 x 135 mm LINE
horizontal version
Nappy changer in robust, germ-reducing and easy-
care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visib-
le surfaces satin finished and brushed, handle strip with
glossy surface IIID.
Further available surfaces: see below.
Easy to open and close with maintenance free lifting
mechanism supported by gas struts.
Table surface in grey polypropylene, molded, without
any visible fixtures.
TÜV-tested and certified according to
DIN EN 1221-1: 2013
DIN EN 1221-2: 2013
AfPS GS 2014: 01 PAK
Load capacity 15 kg, test load 150 kg;
approved for public and private use.
Wear parts can be replaced as modules.
Installation dimensions: 902 x 568 x 110 mm
Mounting: With four screws in wall opening through
fixing holes in the side walls.
Delivery includes fixing material.
Weight, including single package: 25.2 kg
Suggested text for specifications:
Nappy changer in stainless steel (AISI 304) for flush
mounting. All-stainless steel housing; all corners fully
welded, visible surfaces satin finished and brushed,
handle strip with glossy surface IIID. Table surface
molded in polypropylene to fold out with lifting
mechanism supported by gas struts. TÜV-tested and
certified. Approved for public and private use. Deli-
very includes fixing material.
Dimensions: 900 x 566 x 135 mm
Article No. WP2010
Available surfaces ID No.
satin finished (standard) 727 676
(coloured) plastic powder-coating 728 676
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
NAPPY CHANGER WP2015 A
910 x 576 x 135 mm LINE
horizontal version
Nappy changer in robust, germ-reducing and easy-
care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visib-
le surfaces satin finished and brushed, handle strip with
glossy surface IIID.
Further available surfaces: see below.
Easy to open and close with maintenance free lifting
mechanism supported by gas struts.
Table surface in grey polypropylene, molded, without
any visible fixtures.
TÜV-tested and certified according to
DIN EN 1221-1: 2013
DIN EN 1221-2: 2013
AfPS GS 2014: 01 PAK
Load capacity 15 kg, test load 150 kg;
approved for public and private use.
Wear parts can be replaced as modules.
Mounting: With four screws through fixing holes in the
back wall.
Delivery includes fixing material.
Weight, including single package: 25.2 kg
Suggested text for specifications:
Nappy changer in stainless steel (AISI 304) for
surface mounting. All-stainless steel housing; all cor-
ners fully welded, visible surfaces satin finished and
brushed, handle strip with glossy surface IIID. Table
surface molded in polypropylene to fold out with lif-
ting mechanism supported by gas struts. TÜV-tested
and certified. Approved for public and private use.
Delivery includes fixing material.
Dimensions: 910 x 576 x 135 mm
Article No. WP2015
Available surfaces ID No.
satin finished (standard) 727 885
(coloured) plastic powder-coating 728 885
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
NAPPY CHANGER WP2110 A
530 x 936 x 135 mm LINE
vertical version
Nappy changer in robust, germ-reducing and easy-
care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visib-
le surfaces satin finished and brushed, handle strip with
glossy surface IIID.
Further available surfaces: see below.
Easy to open and close with maintenance free lifting
mechanism supported by gas struts.
Table surface in grey polypropylene, molded, without
any visible fixtures.
TÜV-tested and certified according to
DIN EN 1221-1: 2013
DIN EN 1221-2: 2013
AfPS GS 2014: 01 PAK
Load capacity 15 kg, test load 150 kg;
approved for public and private use.
Wear parts can be replaced as modules.
Installation dimensions: 532 x 938 x 110 mm
Mounting: With four screws in wall opening through
fixing holes in the side walls.
Delivery includes fixing material.
Weight, including single package: 26.7 kg
Suggested text for specifications:
Nappy changer in stainless steel (AISI 304) for flush
mounting. All-stainless steel housing; all corners fully
welded, visible surfaces satin finished and brushed,
handle strip with glossy surface IIID. Table surface
molded in polypropylene to fold out with lifting
mechanism supported by gas struts. TÜV-tested and
certified. Approved for public and private use. Deli-
very includes fixing material.
Dimensions: 530 x 936 x 135 mm
Article No. WP2110
Available surfaces ID No.
satin finished (standard) 727 686
(coloured) plastic powder-coating 728 686
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
NAPPY CHANGER WP2115 A
540 x 946 x 135 mm LINE
vertical version
Nappy changer in robust, germ-reducing and easy-
care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visib-
le surfaces satin finished and brushed, handle strip with
glossy surface IIID.
Further available surfaces: see below.
Easy to open and close with maintenance free lifting
mechanism supported by gas struts.
Table surface in grey polypropylene, molded, without
any visible fixtures.
TÜV-tested and certified according to
DIN EN 1221-1: 2013
DIN EN 1221-2: 2013
AfPS GS 2014: 01 PAK
Load capacity 15 kg, test load 150 kg;
approved for public and private use.
Wear parts can be replaced as modules.
Mounting: With four screws through fixing holes in the
back wall.
Delivery includes fixing material.
Weight, including single package: 26.7 kg
Suggested text for specifications:
Nappy changer in stainless steel (AISI 304) for
surface mounting. All-stainless steel housing; all cor-
ners fully welded, visible surfaces satin finished and
brushed, handle strip with glossy surface IIID. Table
surface molded in polypropylene to fold out with lif-
ting mechanism supported by gas struts. TÜV-tested
and certified. Approved for public and private use.
Delivery includes fixing material.
Dimensions: 540 x 946 x 135 mm
Article No. WP2115
Available surfaces ID No.
satin finished (standard) 727 886
(coloured) plastic powder-coating 728 886
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
PAPER ROLL DISPENSER FOR NAPPY CHANGER WP2405 A
435 x 148 x 148 mm LINE
for 1 paper roll
Paper roll dispenser for nappy changer in robust,
germ-reducing and easy-care stainless steel
(AISI 304).
All-stainless steel housing; all corners fully welded, visib-
le surfaces satin finished and brushed.
Further available surfaces: see below.
Designed for one standard paper roll with dimensions:
Outer diameter max. 125 mm
Width: max. 390 mm
Core diameter: min. 40 mm.
Inspection slot to indicate fill level.
Accessible for refilling through lockable, hinged
housing.
Keyed alike cylinder lock in corrosion-resistant zinc
die-casting.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and
one optional anti-theft hole in the back wall.
Delivery includes fixing material.
Weight, including single package: 3.8 kg
Suggested text for specifications:
Paper roll dispenser for nappy changer in stainless
steel (AISI 304) for surface mounting. All-stainless
steel housing; all corners fully welded, visible sur-
faces satin finished and brushed. Designed for
one standard paper roll. Inspection slot to indicate
fill level. Accessible for refilling through lockable,
hinged housing. Keyed alike cylinder lock in corrosi-
on-resistant zinc die-casting. Delivery includes fixing
material.
Dimensions: 435 x 148 x 148 mm
Article No. WP2405
Available surfaces ID No.
satin finished (standard) 727 680
highly polished 731 680
(coloured) plastic powder-coating 728 680
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
NAPPY BIN WP2505 A
298 x 780 x 310 mm LINE
Capacity approx. 36 l
Nappy bin in robust, germ-reducing and easy-care
stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded,
visible surfaces satin finished and brushed, at the top
highly polished.
Further available surfaces: see below.
Equipped with removable hygiene bin. Capacity
approx. 36 l. Designed for standard garbage bags.
Accessible through lockable door.
Keyed alike cylinder lock in corrosion-resistant zinc
die-casting.
On the top one-hand operated, by 180 ° swiveling,
odor-reducing insertion sluice made of polypropylene.
Wear parts can be replaced as modules.
With four rubber feet for floor installation.
Weight, including single package: 13.0 kg
Suggested text for specifications:
Nappy bin in stainless steel (AISI 304) for floor
installation. All-stainless steel housing; all corners
fully welded, visible surfaces satin finished and
brushed, at the top highly polished. Equipped with
removable hygiene bin, designed for standard
garbage bags. Capacity approx. 36 l. Accessible
through lockable door. Keyed alike cylinder lock in
corrosion-resistant zinc die-casting. On the top one-
hand operated, by 180 ° swiveling insertion sluice
made of polypropylene.
Dimensions: 298 x 780 x 310 mm
Article No. WP2505
Available surfaces ID No.
satin finished (standard) 727 685
highly polished 731 685
(coloured) plastic powder-coating 728 685
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
COMBINATION PAPER/WASTE WP5010 A
298 x 1048 x 220 mm LINE
250 paper towels, 32 l waste bin
Combination consisting of a paper towel dispenser and a waste bin in robust, germ-
reducing and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and
brushed.
Further available surfaces: see below.
Paper towel dispenser with deep-drawn paper removal opening for easy paper
removal.
Designed for approx. 250 standard paper towels in zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Inspection slot to indicate fill level.
Accessible for refilling through lockable front flap with fall protection.
Waste bin equipped with removable mesh basket. Capacity approx. 32 l. Accessible
through lockable door.
Keyed alike cylinder locks in corrosion-resistant zinc die-casting.
Wear parts and front panels can be replaced as modules.
Installation dimensions: 300 x 1050 x 210 mm (when fully fitted).
Mounting: With six screws in wall opening through fixing holes in the side walls.
Delivery includes fixing material and one pack of paper towels.
Weight, including single package: 13.4 kg
Suggested text for specifications:
Combination consisting of a paper towel dispenser and a waste bin in stainless
steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully
welded, visible surfaces satin finished and brushed. Paper towel dispenser with
deep-drawn paper removal opening, filling quantity approx. 250 paper towels.
Inspection slot to indicate fill level. Accessible for refilling through lockable front
flap with fall protection. Waste bin equipped with removable mesh basket. Capa-
city approx. 32 l. Accessible through lockable door. Keyed alike cylinder locks in
corrosion-resistant zinc die-casting. Delivery includes fixing material and one pack
of paper towels.
Dimensions: 298 x 1048 x 220 mm
Article No. WP5010
Available surfaces ID No.
satin finished (standard) 727 528
highly polished 731 528
(coloured) plastic powder-coating 729 528
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
COMBINATION PAPER/WASTE WP5015 A
298 x 1048 x 220 mm LINE
250 paper towels, 32 l waste bin
Combination consisting of a paper towel dispenser and a waste bin in robust, germ-
reducing and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and
brushed. Further available surfaces: see below.
Paper towel dispenser with deep-drawn paper removal opening for easy paper
removal.
Designed for approx. 250 standard paper towels in zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Inspection slot to indicate fill level.
Accessible for refilling through lockable front flap with fall protection.
Waste bin equipped with removable mesh basket.
Capacity approx. 32 l. Accessible through lockable door.
Keyed alike cylinder locks in corrosion-resistant zinc die-casting.
Wear parts can be replaced as modules.
Mounting: With four screws through key holes and one optional anti-theft hole in the
back wall.
Delivery includes fixing material and one pack of paper towels.
Weight, including single package: 13.4 kg
Suggested text for specifications:
Combination consisting of a paper towel dispenser and a waste bin in stainless
steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully
welded, visible surfaces satin finished and brushed. Paper towel dispenser with
deep-drawn paper removal opening, filling quantity approx. 250 paper towels.
Inspection slot to indicate fill level. Accessible for refilling through lockable front
flap with fall protection. Waste bin equipped with removable mesh basket. Capa-
city approx. 32 l. Accessible through lockable door. Keyed alike cylinder locks in
corrosion-resistant zinc die-casting. Delivery includes fixing material and one pack
of paper towels.
Dimensions: 298 x 1048 x 220 mm
Article No. WP5015
Available surfaces ID No.
satin finished (standard) 722 996
highly polished 731 996
(coloured) plastic powder-coating 728 996
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
COMBINATION PAPER/WASTE WP5110 A
298 x 1198 x 220 mm LINE
500 paper towels, 32 l waste bin
Combination consisting of a paper towel dispenser and a waste bin in robust, germ-
reducing and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and
brushed. Further available surfaces: see below.
Paper towel dispenser with deep-drawn paper removal opening for easy paper
removal.
Designed for approx. 500 standard paper towels in zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Inspection slot to indicate fill level.
Accessible for refilling through lockable front flap with fall protection.
Waste bin equipped with removable mesh basket. Capacity approx. 32 l. Accessible
through front flap.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Wear parts and front panels can be replaced as modules.
Installation dimensions: 300 x 1200 x 110 mm
Mounting: With six screws in wall opening through fixing holes in the side walls.
Delivery includes fixing material and one pack of paper towels.
Weight, including single package: 14.4 kg
Suggested text for specifications:
Combination consisting of a paper towel dispenser and a waste bin in stainless
steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully wel-
ded, visible surfaces satin finished and brushed. Paper towel dispenser with deep-
drawn paper removal opening, filling quantity approx. 500 paper towels. Inspec-
tion slot to indicate fill level. Accessible for refilling through lockable front flap
with fall protection. Waste bin equipped with removable mesh basket. Capacity
approx. 32 l. Accessible through front flap. Keyed alike cylinder lock in corrosion-
resistant zinc die-casting. Delivery includes fixing material and one pack of paper
towels.
Dimensions: 298 x 1198 x 220 mm
Article No. WP5110
Available surfaces ID No.
satin finished (standard) 727 526
highly polished 731 526
(coloured) plastic powder-coating 729 526
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
COMBINATION PAPER/WASTE WP5115 A
298 x 1198 x 220 mm LINE
500 paper towels, 32 l waste bin
Combination consisting of a paper towel dispenser and a waste bin in robust, germ-
reducing and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and
brushed. Further available surfaces: see below.
Paper towel dispenser with deep-drawn paper removal opening for easy paper
removal.
Designed for approx. 500 standard paper towels in zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Inspection slot to indicate fill level.
Accessible for refilling through lockable front flap with fall protection.
Waste bin equipped with removable mesh basket.
Capacity approx. 32 l. Accessible through front flap.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Wear parts can be replaced as modules.
Mounting: With six screws through key holes and one optional anti-theft hole in the
back wall.
Delivery includes fixing material and one pack of paper towels.
Weight, including single package: 14.4 kg
Suggested text for specifications:
Combination consisting of a paper towel dispenser and Combination consisting of
a paper towel dispenser and a waste bin in stainless steel (AISI 304) for surface
mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin
finished and brushed. Paper towel dispenser with deep-drawn paper removal ope-
ning, filling quantity approx. 500 paper towels. Inspection slot to indicate fill level.
Accessible for refilling through lockable front flap with fall protection. Waste bin
equipped with removable mesh basket. Capacity approx. 32 l. Accessible through
front flap. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery
includes fixing material and one pack of paper towels.
Dimensions: 298 x 1198 x 220 mm
Article No. WP5115
Available surfaces ID No.
satin finished (standard) 722 994
highly polished 731 994
(coloured) plastic powder-coating 728 994
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
COMBINATION PAPER/WASTE WP5120 A
298 x 1198 x 220 mm LINE
500 paper towels, 32 l waste bin
Combination consisting of a paper towel dispenser and a waste bin in robust, germ-
reducing and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and
brushed. Further available surfaces: see below.
Paper towel dispenser with deep-drawn paper removal opening for easy paper
removal.
Designed for approx. 500 standard paper towels in zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Inspection slot to indicate fill level.
Accessible for refilling through lockable front flap with fall protection.
Waste bin equipped with removable mesh basket. Capacity approx. 32 l. Accessible
through lockable door.
Keyed alike cylinder locks in corrosion-resistant zinc die-casting.
Wear parts and front panels can be replaced as modules.
Installation dimensions: 300 x 1200 x 210 mm (when fully fitted).
Mounting: With six screws in wall opening through fixing holes in the side walls.
Delivery includes fixing material and one pack of paper towels.
Weight, including single package: 14.7 kg
Suggested text for specifications:
Combination consisting of a paper towel dispenser and a waste bin in stainless
steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully
welded, visible surfaces satin finished and brushed. Paper towel dispenser with
deep-drawn paper removal opening, filling quantity approx. 500 paper towels.
Inspection slot to indicate fill level. Accessible for refilling through lockable front
flap with fall protection. Waste bin equipped with removable mesh basket. Capa-
city approx. 32 l. Accessible through lockable door. Keyed alike cylinder locks in
corrosion-resistant zinc die-casting. Delivery includes fixing material and one pack
of paper towels.
Dimensions: 298 x 1198 x 220 mm
Article No. WP5120
Available surfaces ID No.
satin finished (standard) 727 524
highly polished 731 524
(coloured) plastic powder-coating 729 524
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
COMBINATION PAPER/WASTE WP5125 A
298 x 1198 x 220 mm LINE
500 paper towels, 32 l waste bin
Combination consisting of a paper towel dispenser and a waste bin in robust, germ-
reducing and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and
brushed. Further available surfaces: see below.
Paper towel dispenser with deep-drawn paper removal opening for easy paper
removal.
Designed for approx. 500 standard paper towels in zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Inspection slot to indicate fill level.
Accessible for refilling through lockable front flap with fall protection.
Waste bin equipped with removable mesh basket.
Capacity approx. 32 l. Accessible through lockable door.
Keyed alike cylinder locks in corrosion-resistant zinc die-casting.
Wear parts can be replaced as modules.
Mounting: With six screws through key holes and one optional anti-theft hole in the
back wall.
Delivery includes fixing material and one pack of paper towels.
Weight, including single package: 14.7 kg
Suggested text for specifications:
Combination consisting of a paper towel dispenser and a waste bin in stainless
steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully
welded, visible surfaces satin finished and brushed. Paper towel dispenser with
deep-drawn paper removal opening, filling quantity approx. 500 paper towels.
Inspection slot to indicate fill level. Accessible for refilling through lockable front
flap with fall protection. Waste bin equipped with removable mesh basket. Capa-
city approx. 32 l. Accessible through lockable door. Keyed alike cylinder locks in
corrosion-resistant zinc die-casting. Delivery includes fixing material and one pack
of paper towels.
Dimensions: 298 x 1198 x 220 mm
Article No. WP5125
Available surfaces ID No.
satin finished (standard) 722 995
highly polished 731 995
(coloured) plastic powder-coating 728 995
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
COMBINATION SOAP/PAPER/WASTE WP5410 A
448 x 1198 x 220 mm LINE
950 ml soap, 500 paper towels, 48 l waste bin
Combination consisting of a liquid soap dispenser, a paper towel dispenser and a
waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and
brushed. Further available surfaces: see below.
Liquid soap dispenser with one-hand operated and non-drip soap pump.
Designed for standard 950 ml disposable bottles of liquid soap or hand lotion.
Also available as sensor soap dispenser for a surcharge.
Paper towel dispenser with deep-drawn paper removal opening for easy paper
removal.
Designed for approx. 500 standard paper towels in zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Inspection slots to indicate fill level.
Accessible for refilling through lockable front flap with fall protection.
Waste bin equipped with removable mesh basket. Capacity approx. 48 l. Accessible
through front flap.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Wear parts and front panels can be replaced as modules.
Installation dimensions: 450 x 1200 x 110 mm
Mounting: With six screws in wall opening through fixing holes in the side walls.
Delivery includes fixing material, first fill with soap and one pack of paper towels.
Weight, including single package: 20.6 kg
Suggested text for specifications:
Combination consisting of a liquid soap dispenser, a paper towel dispenser and a
waste bin in stainless steel (AISI 304) for flush mounting. All-stainless steel housing;
all corners fully welded, visible surfaces satin finished and brushed. Liquid soap
dispenser with one-hand operated and non-drip soap pump. Designed for stan-
dard 950 ml disposable bottles of liquid soap or hand lotion. Paper towel dispen-
ser with deep-drawn paper removal opening, filling quantity approx. 500 paper
towels. Inspection slots to indicate fill level. Accessible for refilling through lockable
front flap with fall protection. Waste bin equipped with removable mesh basket.
Capacity approx. 48 l. Accessible through front flap. Keyed alike cylinder lock in
corrosion-resistant zinc die-casting. Delivery includes fixing material, first fill with
soap and one pack of paper towels.
Dimensions: 448 x 1198 x 220 mm
Article No. WP5410
Available surfaces ID No.
satin finished (standard) 727 529
highly polished 731 529
(coloured) plastic powder-coating 729 529
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
COMBINATION SOAP/PAPER/WASTE WP5415 A
448 x 1198 x 220 mm LINE
950 ml soap, 500 paper towels, 48 l waste bin
Combination consisting of a liquid soap dispenser, a paper towel dispenser and a
waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and
brushed. Further available surfaces: see below.
Liquid soap dispenser with one-hand operated and non-drip soap pump.
Designed for standard 950 ml disposable bottles of liquid soap or hand lotion.
Also available as sensor soap dispenser for a surcharge.
Paper towel dispenser with deep-drawn paper removal opening for easy paper
removal.
Designed for approx. 500 standard paper towels in zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Inspection slots to indicate fill level.
Accessible for refilling through lockable front flap with fall protection.
Waste bin equipped with removable mesh basket.
Capacity approx. 48 l. Accessible through front flap.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Wear parts can be replaced as modules.
Mounting: With six screws through key holes and one optional anti-theft hole in the
back wall.
Delivery includes fixing material, first fill with soap and one pack of paper towels.
Weight, including single package: 20.6 kg
Suggested text for specifications:
Combination consisting of a liquid soap dispenser, a paper towel dispenser and
a waste bin in stainless steel (AISI 304) for surface mounting. All-stainless steel
housing; all corners fully welded, visible surfaces satin finished and brushed. Liquid
soap dispenser with one-hand operated and non-drip soap pump. Designed for
standard 950 ml disposable bottles of liquid soap or hand lotion. Paper towel
dispenser with deep-drawn paper removal opening, filling quantity approx. 500
paper towels. Inspection slots to indicate fill level. Accessible for refilling through
lockable front flap with fall protection. Waste bin equipped with removable mesh
basket. Capacity approx. 48 l. Accessible through front flap. Keyed alike cylinder
lock in corrosion-resistant zinc die-casting. Delivery includes fixing material, first fill
with soap and one pack of paper towels.
Dimensions: 448 x 1198 x 220 mm
Article No. WP5415
Available surfaces ID No.
satin finished (standard) 722 997
highly polished 731 997
(coloured) plastic powder-coating 728 997
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
COMBINATION SOAP/PAPER/WASTE WP5420 A
448 x 1198 x 220 mm LINE
950 ml soap, 500 paper towels, 48 l waste bin
Combination consisting of a liquid soap dispenser, a paper towel dispenser and a
waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and
brushed. Further available surfaces: see below.
Liquid soap dispenser with one-hand operated and non-drip soap pump.
Designed for standard 950 ml disposable bottles of liquid soap or hand lotion.
Also available as sensor soap dispenser for a surcharge.
Paper towel dispenser with deep-drawn paper removal opening for easy paper
removal.
Designed for approx. 500 standard paper towels in zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Inspection slots to indicate fill level.
Accessible for refilling through lockable front flap with fall protection.
Waste bin equipped with removable mesh basket.
Capacity approx. 48 l. Accessible through lockable door.
Keyed alike cylinder locks in corrosion-resistant zinc die-casting.
Wear parts and front panels can be replaced as modules.
Installation dimensions: 450 x 1200 x 210 mm (when fully fitted).
Mounting: With six screws in wall opening through fixing holes in the side walls.
Delivery includes fixing material, first fill with soap and one pack of paper towels.
Weight, including single package: 21.6 kg
Suggested text for specifications:
Combination consisting of a liquid soap dispenser, a paper towel dispenser and a
waste bin in stainless steel (AISI 304) for flush mounting. All-stainless steel housing;
all corners fully welded, visible surfaces satin finished and brushed. Inspection
slots to indicate fill level. Liquid soap dispenser with one-hand operated, tropffreier
Seifenpumpe; vorgesehen for standard 950 ml disposable bottles of liquid soap or
hand lotion. Paper towel dispenser with deep-drawn paper removal opening, filling
quantity approx. 500 paper towels. Accessible for refilling through lockable front
flap with fall protection. Waste bin equipped with removable mesh basket. Capa-
city approx. 48 l. Accessible through lockable door. Keyed alike cylinder locks in
corrosion-resistant zinc die-casting. Delivery includes fixing material, first fill with
soap and one pack of paper towels.
Dimensions: 448 x 1198 x 220 mm
Article No. WP5420
Available surfaces ID No.
satin finished (standard) 727 523
highly polished 731 523
(coloured) plastic powder-coating 728 523
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
COMBINATION SOAP/PAPER/WASTE WP5425 A
448 x 1198 x 220 mm LINE
950 ml soap, 500 paper towels, 48 l waste bin
Combination consisting of a liquid soap dispenser, a paper towel dispenser and a
waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and
brushed. Further available surfaces: see below.
Liquid soap dispenser with one-hand operated and non-drip soap pump.
Designed for standard 950 ml disposable bottles of liquid soap or hand lotion.
Also available as sensor soap dispenser for a surcharge.
Paper towel dispenser with deep-drawn paper removal opening for easy paper
removal.
Designed for approx. 500 standard paper towels in zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Inspection slots to indicate fill level.
Accessible for refilling through lockable front flap with fall protection.
Waste bin equipped with removable mesh basket.
Capacity approx. 48 l. Accessible through lockable door.
Keyed alike cylinder locks in corrosion-resistant zinc die-casting.
Wear parts can be replaced as modules.
Mounting: With six screws through key holes and one optional anti-theft hole in the
back wall.
Delivery includes fixing material, first fill with soap and one pack of paper towels.
Weight, including single package: 21.6 kg
Suggested text for specifications:
Combination consisting of a liquid soap dispenser, a paper towel dispenser and
a waste bin in stainless steel (AISI 304) for surface mounting. All-stainless steel
housing; all corners fully welded, visible surfaces satin finished and brushed. Liquid
soap dispenser with one-hand operated and non-drip soap pump. Designed for
standard 950 ml disposable bottles of liquid soap or hand lotion. Paper towel
dispenser with deep-drawn paper removal opening, filling quantity approx. 500
paper towels. Inspection slots to indicate fill level. Accessible for refilling through
lockable front flap with fall protection. Waste bin equipped with removable mesh
basket. Capacity approx. 48 l. Accessible through lockable door. Keyed alike
cylinder locks in corrosion-resistant zinc die-casting. Delivery includes fixing materi-
al, first fill with soap and one pack of paper towels.
Dimensions: 448 x 1198 x 220 mm
Article No. WP5425
Available surfaces ID No.
satin finished (standard) 722 975
highly polished 731 975
(coloured) plastic powder-coating 728 975
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
COMBINATION PAPER ROLL/WASTE WP5450 A
448 x 1348 x 220 mm LINE
Sensor paper roll dispenser, mains-operated, 48 l waste bin
Combination consisting of a sensor paper roll dispenser (mains-operated) and a waste
bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and
brushed. Further available surfaces: see below.
Paper roll dispenser with touch-free operated, capacitive sensor technology, sensor
distance approx. 3.5 cm. Paper length and idle time adjustable.
Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-
tested and certified.
Designed for one paper roll with dimensions:
Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm.
Inspection slot to indicate fill level, residual roll function allows a reserve roll to be
inserted before residual roll is completely used up.
Waste bin equipped with removable mesh basket.
Capacity approx. 48 l.
Accessible through lockable doors.
Keyed alike cylinder locks in corrosion-resistant zinc die-casting.
Wear parts and front panels can be replaced as modules.
Installation dimensions: 450 x 1350 x 210 mm (when fully fitted).
Mounting: With six screws in wall opening through fixing holes in the side walls.
Delivery includes fixing material and first fill with one paper roll.
Weight, including single package: 25.8 kg
Suggested text for specifications:
Combination consisting of a sensor paper roll dispenser (mains-operated) and a
waste bin in stainless steel (AISI 304) for flush mounting. All-stainless steel housing;
all corners fully welded, visible surfaces satin finished and brushed. Paper roll
dispenser with touch-free operated, capacitive sensor technology. Paper length
and idle time adjustable. Mains-operated 230 V / 50 Hz; power rating 7 Watt;
mains cable on site. TÜV/GS-tested and certified. Designed for one paper roll with
dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm.
Inspection slot to indicate fill level. Waste bin equipped with removable mesh bas-
ket. Capacity approx. 48 l. Accessible through lockable doors. Keyed alike cylin-
der locks in corrosion-resistant zinc die-casting. Delivery includes fixing material
and first fill with one paper roll.
Dimensions: 448 x 1348 x 220 mm
Article No. WP5450
Available surfaces ID No.
satin finished (standard) 727 527
highly polished 731 527
(coloured) plastic powder-coating 729 527
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
COMBINATION PAPER ROLL/WASTE WP5451 A
448 x 1348 x 220 mm LINE
Sensor paper roll dispenser battery-powered, 48 l waste bin
Combination consisting of a sensor paper roll dispenser (battery-powered) and a
waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and
brushed. Further available surfaces: see below.
Paper roll dispenser with touch-free operated, capacitive sensor technology, sensor
distance approx. 3.5 cm. Paper length and idle time adjustable.
Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries.
Designed for one paper roll with dimensions:
Width 215 mm, outer diameter max. 180 mm,
inner diameter 50 mm.
Inspection slot to indicate fill level, residual roll function allows a reserve roll to be
inserted before residual roll is completely used up.
Waste bin equipped with removable mesh basket. Capacity approx. 48 l.
Accessible through lockable doors.
Keyed alike cylinder locks in corrosion-resistant zinc die-casting.
Wear parts and front panels can be replaced as modules.
Installation dimensions: 450 x 1350 x 210 mm (when fully fitted).
Mounting: With six screws in wall opening through fixing holes in the side walls.
Delivery includes fixing material and first fill with one paper roll.
Weight, including single package: 25.8 kg
Suggested text for specifications:
Combination consisting of a sensor paper roll dispenser (battery-powered) and a
waste bin in stainless steel (AISI 304) for flush mounting. All-stainless steel housing;
all corners fully welded, visible surfaces satin finished and brushed. Paper roll dis-
penser with touch-free operated, capacitive sensor technology. Paper length and
idle time adjustable. Battery-powered with four standard 1.5 V Mono/LR20/12
A batteries. Designed for one paper roll with dimensions: Width 215 mm, outer
diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level.
Waste bin equipped with removable mesh basket. Capacity approx. 48 l. Acces-
sible through lockable doors. Keyed alike cylinder locks in corrosion-resistant zinc
die-casting. Delivery includes fixing material and first fill with one paper roll.
Dimensions: 448 x 1348 x 220 mm
Article No. WP5451
Available surfaces ID No.
satin finished (standard) 727 541
highly polished 731 541
(coloured) plastic powder-coating 729 541
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
COMBINATION PAPER ROLL/WASTE WP5455 A
448 x 1348 x 220 mm LINE
Sensor paper roll dispenser mains-operated, 48 l waste bin
Combination consisting of a sensor paper roll dispenser (mains-operated) and a
waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and
brushed.
Further available surfaces: see below.
Paper roll dispenser with touch-free operated, capacitive sensor technology, sensor
distance approx. 3.5 cm. Paper length and idle time adjustable.
Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site. TÜV/GS-
tested and certified.
Designed for one paper roll with dimensions:
Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm.
Inspection slot to indicate fill level, residual roll function allows a reserve roll to be
inserted before residual roll is completely used up.
Waste bin equipped with removable mesh basket.
Capacity approx. 48 l.
Accessible through lockable doors.
Keyed alike cylinder locks in corrosion-resistant zinc die-casting.
Wear parts can be replaced as modules.
Mounting: With six screws through key holes and one optional anti-theft hole in the
back wall.
Delivery includes fixing material and first fill with one paper roll.
Weight, including single package: 25.8 kg
Suggested text for specifications:
Combination consisting of a sensor paper roll dispenser (mains-operated) and
a waste bin in stainless steel (AISI 304) for surface mounting. All-stainless steel
housing; all corners fully welded, visible surfaces satin finished and brushed. Paper
roll dispenser with touch-free operated, capacitive sensor technology. Paper length
and idle time adjustable. Mains-operated 230 V / 50 Hz; power rating 7 Watt;
mains cable on site. TÜV/GS-tested and certified. Designed for one paper roll with
dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm.
Inspection slot to indicate fill level. Waste bin equipped with removable mesh bas-
ket. Capacity approx. 48 l. Accessible through lockable doors. Keyed alike cylin-
der locks in corrosion-resistant zinc die-casting. Delivery includes fixing material
and first fill with one paper roll.
Dimensions: 448 x 1348 x 220 mm
Article No. WP5455
Available surfaces ID No.
satin finished (standard) 722 976
highly polished 731 976
(coloured) plastic powder-coating 728 976
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
COMBINATION PAPER ROLL/WASTE WP5456 A
448 x 1348 x 220 mm LINE
Sensor paper roll dispenser battery-powered, 48 l waste bin
Combination consisting of a sensor paper roll dispenser (battery-powered) and a
waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and
brushed. Further available surfaces: see below.
Paper roll dispenser with touch-free operated, capacitive sensor technology, sensor
distance approx. 3.5 cm. Paper length and idle time adjustable.
Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries.
Designed for one paper roll and one reserve roll with dimensions: Width 215 mm,
outer diameter max. 180 mm, inner diameter 50 mm.
Inspection slot to indicate fill level, residual roll function allows a reserve roll to be
inserted before residual roll is completely used up.
Waste bin equipped with removable mesh basket.
Capacity approx. 48 l.
Accessible through lockable doors.
Keyed alike cylinder locks in corrosion-resistant zinc die-casting.
Wear parts can be replaced as modules.
Mounting: With six screws through key holes and one optional anti-theft hole in the
back wall.
Delivery includes fixing material and first fill with one paper roll.
Weight, including single package: 25.8 kg
Suggested text for specifications:
Combination consisting of a sensor paper roll dispenser (battery-powered) and
a waste bin in stainless steel (AISI 304) for surface mounting. All-stainless steel
housing; all corners fully welded, visible surfaces satin finished and brushed.
Paper roll dispenser with touch-free operated, capacitive sensor technology. Paper
length and idle time adjustable. Battery-powered with four standard 1.5 V Mono/
LR20/12 A batteries. Designed for one paper roll with dimensions: Width 215 mm,
outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill
level. Waste bin equipped with removable mesh basket. Capacity approx. 48 l.
Accessible through lockable doors. Keyed alike cylinder locks in corrosion-resistant
zinc die-casting. Delivery includes fixing material and first fill with one paper roll.
Dimensions: 448 x 1348 x 220 mm
Article No. WP5456
Available surfaces ID No.
satin finished (standard) 722 977
highly polished 731 977
(coloured) plastic powder-coating 728 977
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
COMBINATION SOAP/PAPER/WASTE WP5710 A
448 x 1348 x 320 mm LINE
950 ml soap, 750 paper towels, 72 l waste bin
Combination consisting of a liquid soap dispenser, a paper towel dispenser and a
waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and
brushed. Further available surfaces: see below.
Liquid soap dispenser with one-hand operated and non-drip soap pump.
Designed for standard 950 ml disposable bottles of liquid soap or hand lotion.
Also available as sensor soap dispenser for a surcharge.
Paper towel dispenser with deep-drawn paper removal opening for easy paper
removal.
Designed for approx. 750 standard paper towels in zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Inspection slots to indicate fill level.
Accessible for refilling through lockable door.
Waste bin equipped with removable mesh basket. Capacity approx. 72 l. Accessible
through front flap.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Wear parts and front panels can be replaced as modules.
Installation dimensions: 450 x 1350 x 210 mm (when fully fitted).
Mounting: With six screws in wall opening through fixing holes in the side walls.
Delivery includes fixing material, first fill with soap and one pack of paper towels.
Weight, including single package: 26.7 kg
Suggested text for specifications:
Combination consisting of a liquid soap dispenser, a paper towel dispenser and a
waste bin in stainless steel (AISI 304) for flush mounting. All-stainless steel housing;
all corners fully welded, visible surfaces satin finished and brushed. Liquid soap
dispenser with one-hand operated and non-drip soap pump. Designed for stan-
dard 950 ml disposable bottles of liquid soap or hand lotion. Paper towel dispen-
ser with deep-drawn paper removal opening, filling quantity approx. 750 paper
towels. Inspection slots to indicate fill level. Accessible for refilling through lockable
door. Waste bin equipped with removable mesh basket. Capacity approx. 72 l.
Accessible through front flap. Keyed alike cylinder lock in corrosion-resistant zinc
die-casting. Delivery includes fixing material, first fill with soap and one pack of
paper towels.
Dimensions: 448 x 1348 x 320 mm
Article No. WP5710
Available surfaces ID No.
satin finished (standard) 727 542
highly polished 731 542
(coloured) plastic powder-coating 728 542
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
COMBINATION SOAP/PAPER/WASTE WP5715 A
448 x 1348 x 320 mm LINE
950 ml soap, 750 paper towels, 72 l waste bin
Combination consisting of a liquid soap dispenser, a paper towel dispenser and a
waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and
brushed. Further available surfaces: see below.
Liquid soap dispenser with one-hand operated and non-drip soap pump.
Designed for standard 950 ml disposable bottles of liquid soap or hand lotion.
Also available as sensor soap dispenser for a surcharge.
Paper towel dispenser with deep-drawn paper removal opening for easy paper
removal.
Designed for approx. 750 standard paper towels in zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Inspection slots to indicate fill level.
Accessible for refilling through lockable door.
Waste bin equipped with removable mesh basket. Capacity approx. 72 l. Accessible
through front flap.
Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
Wear parts can be replaced as modules.
Mounting: With six screws through key holes and one optional anti-theft hole in the
back wall.
Delivery includes fixing material, first fill with soap and one pack of paper towels.
Weight, including single package: 26.7 kg
Suggested text for specifications:
Combination consisting of a liquid soap dispenser, a paper towel dispenser and
a waste bin in stainless steel (AISI 304) for surface mounting. All-stainless steel
housing; all corners fully welded, visible surfaces satin finished and brushed. Liquid
soap dispenser with one-hand operated and non-drip soap pump. Designed for
standard 950 ml disposable bottles of liquid soap or hand lotion. Paper towel
dispenser with deep-drawn paper removal opening, filling quantity approx. 750
paper towels. Inspection slots to indicate fill level. Accessible for refilling through
lockable door. Waste bin equipped with removable mesh basket. Capacity
approx. 72 l. Accessible through front flap. Keyed alike cylinder lock in corrosion-
resistant zinc die-casting. Delivery includes fixing material, first fill with soap and
one pack of paper towels.
Dimensions: 448 x 1348 x 320 mm
Article No. WP5715
Available surfaces ID No.
satin finished (standard) 722 978
highly polished 731 978
(coloured) plastic powder-coating 728 978
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
COMBINATION SOAP/PAPER/WASTE WP5720 A
448 x 1348 x 320 mm LINE
950 ml soap, 750 paper towels, 72 l waste bin
Combination consisting of a liquid soap dispenser, a paper towel dispenser and a
waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and
brushed. Further available surfaces: see below.
Liquid soap dispenser with one-hand operated and non-drip soap pump.
Designed for standard 950 ml disposable bottles of liquid soap or hand lotion.
Also available as sensor soap dispenser for a surcharge.
Paper towel dispenser with deep-drawn paper removal opening for easy paper
removal.
Designed for approx. 750 standard paper towels in zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Inspection slots to indicate fill level.
Waste bin equipped with removable mesh basket.
Capacity approx. 72 l.
Accessible through lockable doors.
Keyed alike cylinder locks in corrosion-resistant zinc die-casting.
Wear parts and front panels can be replaced as modules.
Installation dimensions: 450 x 1350 x 310 mm (when fully fitted).
Mounting: With six screws in wall opening through fixing holes in the side walls.
Delivery includes fixing material, first fill with soap and one pack of paper towels.
Weight, including single package: 30.4 kg
Suggested text for specifications:
Combination consisting of a liquid soap dispenser, a paper towel dispenser and a
waste bin in stainless steel (AISI 304) for flush mounting. All-stainless steel housing;
all corners fully welded, visible surfaces satin finished and brushed. Liquid soap
dispenser with one-hand operated and non-drip soap pump. Designed for stan-
dard 950 ml disposable bottles of liquid soap or hand lotion. Paper towel dispen-
ser with deep-drawn paper removal opening, filling quantity approx. 750 paper
towels. Inspection slots to indicate fill level. Accessible for refilling through lockable
door. Waste bin equipped with removable mesh basket. Capacity approx. 72 l.
Accessible through lockable doors. Keyed alike cylinder locks in corrosion-resistant
zinc die-casting. Delivery includes fixing material, first fill with soap and one pack
of paper towels.
Dimensions: 448 x 1348 x 320 mm
Article No. WP5720
Available surfaces ID No.
satin finished (standard) 727 546
highly polished 731 546
(coloured) plastic powder-coating 728 546
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
COMBINATION SOAP/PAPER/WASTE WP5725 A
448 x 1348 x 320 mm LINE
950 ml soap, 750 paper towels, 72 l waste bin
Combination consisting of a liquid soap dispenser, a paper towel dispenser and a
waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
All-stainless steel housing; all corners fully welded, visible surfaces satin finished and
brushed. Further available surfaces: see below.
Liquid soap dispenser with one-hand operated and non-drip soap pump.
Designed for standard 950 ml disposable bottles of liquid soap or hand lotion.
Also available as sensor soap dispenser for a surcharge.
Paper towel dispenser with deep-drawn paper removal opening for easy paper
removal.
Designed for approx. 750 standard paper towels in zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Waste bin equipped with removable mesh basket.
Capacity approx. 72 l.
Accessible through lockable doors.
Keyed alike cylinder locks in corrosion-resistant zinc die-casting.
Wear parts can be replaced as modules.
Mounting: With six screws through key holes and one optional anti-theft hole in the
back wall.
Delivery includes fixing material, first fill with soap and one pack of paper towels.
Weight, including single package: 30.4 kg
Suggested text for specifications:
Combination consisting of a liquid soap dispenser, a paper towel dispenser and
a waste bin in stainless steel (AISI 304) for surface mounting. All-stainless steel
housing; all corners fully welded, visible surfaces satin finished and brushed. Liquid
soap dispenser with one-hand operated and non-drip soap pump. Designed for
standard 950 ml disposable bottles of liquid soap or hand lotion. Paper towel
dispenser with deep-drawn paper removal opening, filling quantity approx. 750
paper towels. Inspection slots to indicate fill level. Accessible for refilling through
lockable door. Waste bin equipped with removable mesh basket. Capacity
approx. 72 l. Accessible through lockable doors. Keyed alike cylinder locks in
corrosion-resistant zinc die-casting. Delivery includes fixing material, first fill with
soap and one pack of paper towels.
Dimensions: 448 x 1348 x 320 mm
Article No. WP5725
Available surfaces ID No.
satin finished (standard) 722 979
highly polished 731 979
(coloured) plastic powder-coating 728 979
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
COVERING FRAME A
for flush-mounted models LINE
All-round covering frame in robust, germ-reducing and easy-care stain-
less steel (AISI 304), satin finished and brushed.
Angle profile 16 x 16 mm.
Dimensions: for flush-mounted models with the following dimensions:
148 x 148 mm (ID No. 768 970) for WP106
148 x 348 mm (ID No. 768 646) for WP167
148 x 448 mm (ID No. 768 643) for WP161/208
298 x 148 mm (ID No. 768 658) for WP170
298 x 298 mm (ID No. 768 645) for WP114
298 x 396 mm (ID No. 768 655) for WP1200
298 x 448 mm (ID No. 768 644) for WP112
298 x 598 mm (ID No. 768 647) for WP134/138
298 x 645 mm (ID No. 768 652) for WP501
298 x 748 mm (ID No. 768 654) for WP612
298 x 898 mm (ID No. 768 650) for WP530
298 x 1048 mm (ID No. 768 649) for WP540/5010
298 x 1198 mm (ID No. 768 653) for WP610/5110/5120
298 x 1348 mm (ID No. 768 648) for WP500
350 x 448 mm (ID No. 768 656) for WP1310/1311
350 x 580 mm (ID No. 768 657) for WP1410/1411
448 x 148 mm (ID No. 768 663) for WP506
448 x 1198 mm (ID No. 768 659) for WP5410/5420
448 x 1348mm (ID No. 768 660) for WP5450/5451/5710/5720
530 x 936 mm (ID No. 768 662) for WP2110
900 x 566 mm (ID No. 768 661) for WP2010
Also available in a polished finish.
Suggested text for specifications:
Covering frame for flush-mounted models in stainless
steel (AISI 304), satin finished and brushed. Angle
profile 16 x 16 mm.
Dimensions … x … mm
Ernst Wagner GmbH & Co. KG
Ernst-Abbe-Straße 21 · D-72770 Reutlingen · Tel.: +49712151539-0 · Fax: -20
[email protected] · www.wagner-ewar.de
The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.
Catalogus 2019
Discover the best professional documents and content resources in AnyFlip Document Base.
Search