The words you are searching are inside this book. To get more targeted content, please make full-text search by clicking here.

Glass system technology

Discover the best professional documents and content resources in AnyFlip Document Base.
Search
Published by CKDESIGN, 2017-07-06 05:40:27

Logli Massimo

Glass system technology

glass system technology

1 SYSTEMS FOR BALUSTRADES

18

SYSTEMS FOR BALUSTRADES SYSTEMS FOR
BALUSTRADES

DEFENDER CONNECTIONS FOR SINGLE-POINT CONNECTIONS
Page 20 BALUSTRADES WITH SLAB FOR BALUSTRADES WITH SPACER
ANCHORING Page 52 Page 56

UPRIGHTS FOR ATT SERIES ATT SERIES UPRIGHTS FOR CLAMPS
Page 76 SINGLE-POINT FIXINGS Page 82
Page 77

CARRÉ SERIES CLAMPS BALLON SERIES CLAMPS SINGLE-POINT FIXINGS
Page 83 Page 85 WITH TERMINAL
Page 88

CIRCULAR SINGLE-POINT HANDRAIL FINISHING PROFILES
FIXINGS Page 90 Page 102
Page 89

POOL GLASS CLAMPS GLASS CLAMPS FOR OUTDOORS
Page 103 Page 104

19

SYSTEMS FOR DEFENDER
BALUSTRADES
BALAUSTRADES WITHOUT GLASS HOLES
450 SERIES FLOOR AND RECESSED FIXING Test report by
DFS01 SERIES SLAB MOUNTED
CSTB
British
Standard n° CLC 13-26045345 dated 21.11.2013
n° CLC 14-26053561 dated 14.10.2014
6180:2011 n° CLC 15-26058363 dated 30.11.2015

Result of the report
Satisfactory for:
ERP

(Applications in public spaces)
STADIUM

20

SYSTEMS FOR
BALUSTRADES

TECHNICAL GUIDE AVAILABLE ON:

www.loglimassimo.it

21

SYSTEMS FOR DEFENDER
BALUSTRADES
PATENTED
SYSTEM

22

DEFENDER SYSTEMS FOR
BALUSTRADES
DEFENDER 450
5.90
FEATURES:
kN/m
✔ Patented system for glass fixing and angle adjustment
with glass
WITHOUT WEDGES
10+10+1.52
✔ Extremely resistant
SentryGlas® ✔ Small dimensions (h=119,5 mm; b=72 mm)
✔ Supplied predrilled
✔ NO COVERS
✔ ANODIZED 20 MICRONS
✔ Wrapped in protective film
✔ QUICK AND EASY INSTALLATION

6.00 DEFENDER DFS01

kN/m FEATURES:

with glass ✔ Patented system for glass fixing and angle adjustment

10+10+1.52 WITHOUT WEDGES

SentryGlas® ✔ Extremely resistant
✔ Small dimensions (h=119,5 mm; b=74,5 mm)
✔ Supplied predrilled
✔ ANODIZED 20 MICRONS
✔ Wrapped in protective film
✔ QUICK AND EASY INSTALLATION

For Kuraray’s Licensees’ Use:
SentryGlas® is a registered trademark of E.I. du Pont de

Nemours and Company or its affiliates for its brand of interlayers
and is used under license.

23

SYSTEMS FOR DEFENDER - FEATURES
BALUSTRADES
✔ Patented system for glass fixing and angle adjustment WITHOUT WEDGES

2° 2°

For 6.6.4 (13,52 mm), 8.8.4 (17,52 mm) and 10.10.4 (21.52 mm)
24

DEFENDER - FEATURES SYSTEMS FOR
BALUSTRADES

✔ Small dimensions DEFENDER DFS01 ✔ Extremely resistant
DEFENDER 450 DEFENDER 450
13.52 / 17.52 / 21.52
13.52 / 17.52 / 21.52
5.90
WITHOUT
kN/m GLASS
BREAKAGE
with glass
95
10+10+1.52

SentryGlas®

119.5

DEFENDER DFS01

25 182
62.5
72 6.00 WITHOUT
GLASS
✔ Quick and easy installation kN/m BREAKAGE

with glass

10+10+1.52

SentryGlas®

74.5

1 Fastening spacing: 200mm 2 Clamps spacing: 250mm 3 Adjustable pressing devices: 2 each clamp

4 Easy glass angle adjustment 5 Snap on finishing cover

25

SYSTEMS FOR DEFENDER 450 - LABORATORY TEST - GLASS 10.10.4
BALUSTRADES

Deformation at 3 kN/m force

Deformation at 4,5 kN/m force

RAILING RESISTANCE TO STATIC HORIZONTAL LOAD ACCORDING TO M.D.
ON INFRASTRUCURES OF 14/01/2008

CONCLUSIONS: Based on the test performed, the results obtained and the indications of table 3.1.II
of Ministerial Decree on Infrastructures of 14/01/2008, the tested sample consisting of railing limited
to the horizontal linear static load, complies with the requirements of the above-mentioned M.D. on
Infrastructures of 14/01/2008.

Fu = unit load per meter - Du = deformation under load

NOTE: According to UNI7967 of 2014 the immediate post-break glass collapse must be avoided,
hence it is no longer permitted to use the type of interlayer used in tests, without combining a
structural handrail. It is also possible to make balustrades without a handrail using a stiff structural
interlayer.

Du A BC D
Fu
25 200 25
375 375

Unit Deformation under load Du 10+10+1,52 PVB
load Tempered laminated glass

Fu A B C D 119.5 TOTAL LOAD
(kN/m) (mm) (mm) (mm) (mm) 1100 4,5kN

1,00 28 25 27 28 125 250 250 250 125
2,00 72 70 71 73

3,00 109 108 109 109

4,50 193 191 192 194 L=1000
26
RESULTS OBTAINED FROM TESTING A SINGLE STRATIFIED TEMPERED GLASS PANEL

DEFENDER 450 - LABORATORY TEST - GLASS 8.8.4 SYSTEMS FOR
BALUSTRADES

Deformation at 3 kN/m force

Deformation at 4,5 kN/m force

RAILING RESISTANCE TO STATIC HORIZONTAL LOAD ACCORDING TO M.D.
ON INFRASTRUCURES OF 14/01/2008

CONCLUSIONS: Based on the test performed, the results obtained and the indications of table 3.1.II
of Ministerial Decree on Infrastructures of 14/01/2008, the tested sample consisting of railing limited
to the horizontal linear static load, complies with the requirements of the above-mentioned M.D. on
Infrastructures of 14/01/2008.

Fu = unit load per meter - Du = deformation under load

NOTE: According to UNI7967 of 2014 the immediate post-break glass collapse must be avoided,
hence it is no longer permitted to use the type of interlayer used in tests, without combining a
structural handrail. It is also possible to make balustrades without a handrail using a stiff structural
interlayer.

Du A BC D
Fu
25 200 25
375 375

Unit Deformation under load Du 8+8+1,52 PVB
load Tempered laminated glass

Fu A B C D 119.5 TOTAL LOAD
(kN/m) (mm) (mm) (mm) (mm) 1100 4,5kN

1,00 38 39 39 38 125 250 250 250 125
2,00 92 92 93 91

3,00 157 157 158 156

4,50 / / / / L=1000

RESULTS OBTAINED FROM TESTING A SINGLE STRATIFIED TEMPERED GLASS PANEL

27

SYSTEMS FOR DEFENDER DFS01 - LABORATORY TEST - GLASS 10.10.4
BALUSTRADES

Deformation at 3 kN/m force

Deformation at 4,8 kN/m force

RAILING RESISTANCE TO STATIC HORIZONTAL LOAD ACCORDING TO M.D.
ON INFRASTRUCURES OF 14/01/2008

CONCLUSIONS: Based on the test performed, the results obtained and the indications of table 3.1.II
of Ministerial Decree on Infrastructures of 14/01/2008, the tested sample consisting of railing limited
to the horizontal linear static load, complies with the requirements of the above-mentioned M.D. on
Infrastructures of 14/01/2008.

Fu = unit load per meter - Du = deformation under load

NOTE: According to UNI7967 of 2014 the immediate post-break glass collapse must be avoided,
hence it is no longer permitted to use the type of interlayer used in tests, without combining a
structural handrail. It is also possible to make balustrades without a handrail using a stiff structural
interlayer.

Du A BC D
Fu
25 200 25
375 375

Unit Deformation under load Du 1100 10+10+1,52 PVB
load Tempered laminated glass

Fu A B C D TOTAL LOAD
(kN/m) (mm) (mm) (mm) (mm) 4,8kN

1,00 37 37 36 37 125 250 250 250 125
2,00 92 93 93 92

3,00 158 158 159 158 182

4,80 275 275 275 271 L=1000
28
RESULTS OBTAINED FROM TESTING A SINGLE STRATIFIED TEMPERED GLASS PANEL

DEFENDER DFS01 - LABORATORY TEST - GLASS 8.8.4 SYSTEMS FOR
BALUSTRADES

Deformation at 3 kN/m force

Deformation at 3,6 kN/m force

RAILING RESISTANCE TO STATIC HORIZONTAL LOAD ACCORDING TO M.D.
ON INFRASTRUCURES OF 14/01/2008

CONCLUSIONS: Based on the test performed, the results obtained and the indications of table 3.1.II
of Ministerial Decree on Infrastructures of 14/01/2008, the tested sample consisting of railing limited
to the horizontal linear static load, complies with the requirements of the above-mentioned M.D. on
Infrastructures of 14/01/2008.

Fu = unit load per meter - Du = deformation under load

NOTE: According to UNI7967 of 2014 the immediate post-break glass collapse must be avoided,
hence it is no longer permitted to use the type of interlayer used in tests, without combining a
structural handrail. It is also possible to make balustrades without a handrail using a stiff structural
interlayer.

Du A BC D
Fu
25 200 25
375 375

Unit Deformation under load Du 1100 8+8+1,52 PVB
load Tempered laminated glass

Fu A B C D TOTAL LOAD
(kN/m) (mm) (mm) (mm) (mm) 3,6kN

1,00 57 56 56 55 125 250 250 250 125
2,00 130 129 130 130

3,00 229 228 229 229 182

3,60 268 267 266 265 L=1000

RESULTS OBTAINED FROM TESTING A SINGLE STRATIFIED TEMPERED GLASS PANEL

29

SYSTEMS FOR DEFENDER - LABORATORY TEST - GLASS 8.8.2
BALUSTRADES

Deformation at 1 kN/m force

Deformation at 2 kN/m force

RAILING RESISTANCE TO STATIC HORIZONTAL LOAD ACCORDING TO M.D.
ON INFRASTRUCURES OF 14/01/2008

CONCLUSIONS: Based on the test performed, the results obtained and the indications of table 3.1.II
of Ministerial Decree on Infrastructures of 14/01/2008, the tested sample consisting of railing limited
to the horizontal linear static load, complies with the requirements of the above-mentioned M.D. on
Infrastructures of 14/01/2008.
Fu = unit load per meter - Du = deformation under load

NOTE: According to UNI7967 of 2014 the immediate post-break glass collapse must be avoided,
hence it is no longer permitted to use the type of interlayer used in tests, without combining a
structural handrail. It is also possible to make balustrades without a handrail using a stiff structural
interlayer.

Du A BC D
Fu
25 375 200 375 25

8+8+1,52 PVB
Tempered laminated glass

Unit Deformation under load Du
load

Fu A B C D 119.5 TOTAL LOAD
(kN/m) (mm) (mm) (mm) (mm) 1100 2,5kN/m

1,00 34 33 33 35 125 250 250 250 125
2,00 104 102 103 103
2,50 / / / /

L=1000
RESULTS OBTAINED FROM TESTING A SINGLE STRATIFIED TEMPERED GLASS PANEL

30

SYSTEMS FOR
BALUSTRADES

DEFENDER
31

SYSTEMS FOR DEFENDER
BALUSTRADES
SPECIAL CUTS
ON REQUEST

32

DEFENDER SYSTEMS FOR
BALUSTRADES
RAL & SPECIAL
FINISHES

ON REQUEST

OXY STYLE - License n°758
GEAL - License n°740

DEFENDER – CLASS 20 – Minimum anodizing thickness 20 micron
Suitable for outdoor installations, even in aggressive environments

ANTI-SCRATCH PROTECTION

ALL THE PROFILES ARE PROTECTED BY FILM TO PREVENT
SCRATCHES DURING THE INSTALLATION

33

SYSTEMS FOR DEFENDER
BALUSTRADES
DEFENDER 450 KIT FLOOR/RECESS MOUNTING

Material: extruded aluminum alloy (6063-T6)

Features: A

Kit L= 6000 mm consisting of: 119.5
1 U profile L= 6000 mm, predrilled (Art. DF450.60)
24 clamps with pressing devices included (Art. DF175/DF215) 25
12m seal ( Art. DF1010/DF88)
2 snap-on profiles L= 6000 mm (Art. DF100.60) 36 36
72
Kit L= 3000 mm consisting of:
1 U profile L= 3000 mm, predrilled (Art. DF450.30)
12 clamps with pressing devices included (Art. DF175/DF215)
6m seal ( Art. DF1010/DF88)
2 snap-on profiles L= 3000 mm (Art. DF100.30)

Kit L= 1498 mm consisting of:
1 U profile L= 1498 mm, predrilled (Art. DF450.15)
6 clamps with pressing devices included (Art. DF175/DF215)
3m seal (Art. DF1010/DF88)
2 snap-on profiles L=1498 mm (Art. DF100.15)

Finishes: Brushed-steel-effect aluminium, matt aluminium, RAL 9010 (polished white), raw-finish
The Brushed-steel-effect is available only for profiles up to 3000mm.

Art. Dimensions Glass Q.ty
DF45017,60
DF45017,30 119.5 x 72 x L 6000 mm A = 17.52 mm 1 Set
DF45017,15 1 Set
DF45021,60 119.5 x 72 x L 3000 mm A = 17.52 mm 1 Set
DF45021,30 1 Set
DF45021,15 119.5 x 72 x L 1498 mm A = 17.52 mm 1 Set
1 Set
119.5 x 72 x L 6000 mm A = 21.52 mm

119.5 x 72 x L 3000 mm A = 21.52 mm

119.5 x 72 x L 1498 mm A = 21.52 mm

34 >>> PRICE LIST REFERENCE PAGE 4 >>>

DEFENDER SYSTEMS FOR
BALUSTRADES

DEFENDER DFS01 KIT SIDE FIXING

Material: extruded aluminum alloy (6063-T6)

Features: Important! Art. DFS05 to 62.5 A
be mounted on DFS01 before 74.5
Kit L= 6000 mm consisting of: anchoring to the slab by using 95
1 U profile L= 6000 mm, predrilled (Art. DS01.60) silicon. This caution is necessary
24 clamps with pressing devices included (Art. DF175/DF215) as it can occur the detachment from
12m seal ( Art. DF1010/DF88) the supporting profile caused by
1 snap-on profile L= 6000 mm (Art. DF100.60) strong wind, shakes and vibrations
1 side cladding profile L= 6000 mm (Art. DFS03.60) as well as horizontal load (about
1 bottom cladding profile L= 6000 mm(Art. DFS05.30) 2kN/m)

Kit L= 3000 mm consisting of: 182
1 U profile L= 3000 mm, predrilled (Art. DS01.30) 62.5 57
12 clamps with pressing devices included (Art. DF175/DF215)
6m seal ( Art. DF1010/DF88)
1 snap-on profile L= 3000 mm (Art. DF100.30)
1 side cladding profile L= 3000 mm (Art. DFS03.30)
1 bottom cladding profile L= 3000 mm(Art. DFS05.30)

Kit L= 1498 mm consisting of:
1 U profile L= 1498 mm, predrilled (Art. DFS01.15)
6 clamps with pressing devices included (Art. DF175/DF215)
3m seal (Art. DF1010/DF88)
1 snap-on profile L= 1498 mm (Art. DF100.15)
1 side cladding profile L= 1498 mm (Art. DFS03.15)
1 bottom cladding profile L= 1498 mm(Art. DFS05.15)

Finishes: Brushed-steel-effect aluminium, matt aluminium, raw-finish
The Brushed-steel-effect is available only for profiles up to 3000mm.

Art. Dimensions Glass Q.ty
DFS0117,60
DFS0117,30 182 x 74.5 x L 6000 mm A = 17.52 mm 1 Set
DFS0117,15 1 Set
DFS0121,60 182 x 74.5 x L 3000 mm A = 17.52 mm 1 Set
DFS0121,30 1 Set
DFS0121,15 182 x 74.5 x L 1498 mm A = 17.52 mm 1 Set
1 Set
182 x 74.5 x L 6000 mm A = 21.52 mm

182 x 74.5 x L 3000 mm A = 21.52 mm

182 x 74.5 x L 1498 mm A = 21.52 mm

>>> PRICE LIST REFERENCE PAGE 4 >>> 35

SYSTEMS FOR DEFENDER
BALUSTRADES

DEFENDER 450 PROFILE FOR FLOOR/RECESS MOUNTING

Material: extruded aluminum (6063-T6)

Features: predrilled, continuous U profile

Finishes: Brushed-steel-effect aluminium, matt aluminium,

RAL 9010 (polished white), raw-finish
The Brushed-steel-effect is available only for profiles up to 3000mm.
On demand (not available in stock): RAL finishes
111.5
N° 30n°H3O0 LFEOSRI 7Ø28

100 200 200 100

L=6000mm Ø15
72

Art. Dimensions Q.ty
DF450,60
DF450,30 111.5 x 72 x L 6000 mm 1 Pc
DF450,15 111.5 x 72 x L 3000 mm 1 Pc
111.5 x 72 x L 1498 mm 1 Pc

DEFENDER DFS01 PROFILE FOR SIDE MOUNTING

Material: extruded aluminum (6063-T6)

Features: predrilled, continuous U profile

Finish: Matt aluminium, raw-finish

N° 3n0°3H0OFLOESRI 111.5
Ø15
Ø28
Ø28
100 200 200 100 6

L=6000mm 72

Art. Dimensions Q.ty
DFS01,60
DFS01,30 111.5 x 72 x L 6000 mm 1 Pc
DFS01,15 111.5 x 72 x L 3000 mm 1 Pc
111.5 x 72 x L 1498 mm 1 Pc

KIT OF 12 CLAMPS WITH GASKET FOR DEFENDER

Material: Acetyl copolymer clamps, aluminium pressers, stainless steel screws and TPE gasket.

Description: kit including 12 clamps with pressers to install the DF450/DFS01 systems

6m gasket included.

Art. Glass Q.ty
DF135KIT12 1 Set
DF175KIT12 13.52 mm 1 Set
DF215KIT12 17.52 mm 1 Set
21.52 mm
Q.ty
CLAMP WITH PRESSING DEVICE 1 Pc
FOR DF450/DFS01 1 Pc
1 Pc
Material : Acetal copolymer, aluminum and stainless steel

To be adjusted with the wrench Art. DFCH

Finish: Black acetal copolymer, aluminum

250 mm

Art. Glass
DF135
DF175 13.52 mm
DF215 17.52 mm
21.52 mm
36 >>> PRICE LIST REFERENCE PAGE 5 >>>

DEFENDER SYSTEMS FOR
BALUSTRADES
FINISHING PROFILE FOR DEFENDER 450/DFS01

Material: extruded alluminium (6063T6)
Features: finishing snap in profile with housing for gaskets
Finishes: Brushed-steel-effect aluminium, matt aluminium, RAL 9010 (polished white), raw-finish
The Brushed-steel-effect is available only for profiles up to 3000mm.
On demand (not available in stock): RAL finishes

20.50

11
1.20

8

9.50

Art. Dimensions Q.ty

DF100,60 20.5 x 11 x L 6000 mm 1 Pc
1 Pc
DF100,30 20.5 x 11 x L 3000 mm 1 Pc

DF100,15 20.5 x 11 x L 1498 mm

DEFENDER DFS01 SIDE COVER,
ALSO FOR GUIDE FIXING WITH DF45001NF

Material: extruded aluminum (6063-T6)

Features: side cladding profile with seal housing

Finishes: Brushed-steel-effect aluminium, matt aluminium, RAL 9010 (polished white), raw-finish

The Brushed-steel-effect is available only for profiles up to 3000mm. 23

On demand (not available in stock): RAL finishes

Important! To be fixed with silicone all along the length of the profile. 119.5
This caution is necessary as the detachment from the supporting
profile may occur due to strong wind, shakes and vibration.

2.5

Art. Dimensions Q.ty

DFS03,60 23 x 119.5 x L 6000 mm 1 Pc
1 Pc
DFS03,30 23 x 119.5 x L 3000 mm 1 Pc

DFS03,15 23 x 119.5 x L 1498 mm

DEFENDER DFS01 BOTTOM FINISHING PROFILE

Material: extruded aluminum (6063-T6)

Features: bottom cladding profile

Finishes: Brushed-steel-effect aluminium, matt aluminium, raw-finish
The Brushed-steel-effect is available only for profiles up to 3000mm.
On demand (not available in stock): RAL finishes

74.5

Important! To be fixed with silicone all along the length of the profile.
This caution is necessary as the detachment from the supporting
profile may occur due to strong wind, shakes and vibration.

62.5

Art. Dimensions Q.ty
1 Pc
DFS05,60 62.5 x 74.5 x L 6000 mm 1 Pc
DFS05,30 62.5 x 74.5 x L 3000 mm 1 Pc
DFS05,15 62.5 x 74.5 x L 1498 mm
37
>>> PRICE LIST REFERENCE PAGE 5/6 >>>

SYSTEMS FOR
BALUSTRADES
3
5
11
DEFENDER

FOOTBOARD PROFILE FOR 43.5
DEFENDER DF450 (RECESSED 23
INSTALLATION) AND DFS01

Material: extruded aluminium (6063 T6)

Features: snap finishing profile with housing for balloon

seals, ideal for Defender installations flush to the floor.

Finishes: Brushed-steel-effect aluminium, matt aluminium,

raw-finish aluminium
The Brushed-steel-effect is available only for profiles

up to 3000mm.
On demand (not available in stock): RAL finishes

Important! To be secured with the aid of silicone along the length of the profile.

Example of Defender – recessed installation with DF101 casing Example of Defender – DFS01 with DF101 casing

Art. Dimensions Q.ty
1 Pc
DF101,60 43.5 x 11 x L 6000mm 1 Pc
1 Pc
DF101,30 43.5 x 11 x L 3000 mm

DF101,15 43.5 x 11 x L 1500 mm

38 >>> PRICE LIST REFERENCE PAGE 6 >>>

DEFENDER SYSTEMS FOR
BALUSTRADES

SEAL 21.5 119.5
11 8
Material: TPE

Finish: Black

Art. Glass 4

DF1010 10.10.4 (21.52 mm) 72

SEAL 17.5 / 13.5 Q.ty
1 mt
Material: TPE
DF1010
Finish: Black

8

4 Art. Glass 4
DF1010
DF88 8.8.4 (17.52 mm) and 6.6.4 (13.52 mm) Q.ty
1 mt
DEFENDER 450 END CAP
DF88
Material: AISI 316 stainless steel / aluminum
Features: wrapped in protective film 74
AISI 316 Finishes: Brushed steel 72
Aluminium Finishes: Brushed-steel-effect aluminium, matt aluminium,
RAL 9010 (polished white), raw-finish
On demand (not available in stock): RAL finishes

182 126.6
119.5

75.4

18.7

Art. Dimensions Material Q.ty
DF12072
DF12072AL 119.5 x 72 mm - Thickness 1 mm Stainless steel 1 Pc
119.5 x 72 mm - Thickness 1 mm
Aluminum 1 Pc

DEFENDER 450 OPEN END CAPS 74
72
Material: AISI 316 stainless steel / aluminum
Features: wrapped in protective film A
AISI 316 Finishes: Brushed steel
Aluminium Finishes: Brushed-steel-effect aluminium, matt aluminium,
RAL 9010 (polished white), raw-finish
On demand (not available in stock): RAL finishes

182 96.5
119.5 126.6

75.4

Art. Dimensions Glass 18M.7 aterial Q.ty
DF175TP 1 Pc
DF215TP 119.5 x 72 mm - Thickness 1 mm A = 17.52 mm Stainless steel 1 Pc
DF175TPAL 1 Pc
DF215TPAL 119.5 x 72 mm - Thickness 1 mm A = 21.52 mm Stainless steel 1 Pc

119.5 x 72 mm - Thickness 1 mm A = 17.52 mm Aluminum 39

119.5 x 72 mm - Thickness 1 mm A = 21.52 mm Aluminum

>>> PRICE LIST REFERENCE PAGE 6 >>>

SYSTEMS FOR DEFENDER 18.7 96.5 7
BALUSTRADES 96.5

DEFENDER 450 “V” OPEN END CAPS ±2°

Material: AISI 316 stainless steel / aluminum 72
Features: wrapped in protective film 72
AISI 316 Finishes: Brushed steel 72A
Aluminium Finishes: Brushed-steel-effect aluminium, A
matt aluminium, raw-finish
On demand (not available in stock): RAL finishes

119.5

119.5 119.5

24.1

Art. Dimensions Glass Material Q.ty
DF2TP
DF2TPAL 119.5 x 72 mm - Thickness 1 mm A = 17.52 / 21.52 mm Stainless steel 1 Pc

119.5 x 72 mm - Thickness 1 mm A = 17.52 / 21.52 mm Aluminum 1 Pc

DEFENDER DFS01 END CAP ±2°96.5
12162.66.6
Material: AISI 316 stainless steel / aluminum 74
Features: wrapped in protective film 74 A
AISI 316 Finishes: Brushed steel
Aluminium Finishes: Brushed-steel-effect aluminium, ±2°
matt aluminium, raw-finish
On demand (not available in stock): RAL finishes 72
A
181282

24.1

119.5 75.7459.46.5

1188..77

Art. Dimensions Material Q2.4t.y1
DFSDX
DFSSX 182 x 74 mm - Thickness 1 mm - RIGHT Stainless steel 1 Pc
DFSDXAL 182 x 74 mm - Thickness 1 mm - LEFT
DFSSXAL 182 x 74 mm - Thickness 1 mm - RIGHT Stainless steel 1 Pc
182 x 74 mm - Thickness 1 mm - LEFT
Aluminum 1 Pc

Aluminum 1 Pc

DEFENDER DFS01 OPEN END CAPS ±2°

Material: aluminum 74
72A
Features: wrapped in protective film A

Finishes: Brushed-steel-effect aluminium,

matt aluminium, raw-finish
On demand (not available in stock): RAL finishes

182
119.5
96.5
96.5
126.6

24.1

75.4

18.7

Art. Dimensions Material Q.ty
DFSV2ALDX 182 x 74 mm - Thickness 1 mm - RIGHT
DFSV2ALSX 182 x 74 mm - Thickness 1 mm - LEFT Aluminum 1 Pc

40 >>> PRICE LIST REFERENCE PAGE 6/7 >>> Aluminum 1 Pc

DEFENDER SYSTEMS FOR
BALUSTRADES
DEFENDER CENTERING DOWELS

Material: aluminum
Features: optional, for the easy alignement of the U profiles; 2 pcs. per connection.
Finish: aluminum

Ø9
Ø9.30

30

Art. Dimensions Q.ty
1 Pair
DF30 Ø9 x 30

DEFENDER 450/DFS01 ADJUSTING SPANNER

Material: stainless steel

Finish: brushed steel

Art. Description Q.ty
1 Pc
DFCH Adjusting spanner

CALCULATION AND INCLINED CUT

Inclined cut on design (1°- 89°)

Art. Q.ty
DFTAGLIO 1 Pc

>>> PRICE LIST REFERENCE PAGE 7 >>> 41

SYSTEMS FOR DEFENDER
BALUSTRADES

GUIDE TRACK FOR POINT MOUNTING

Material: Aluminium 6060 T6 alloy

Guide profile for Defender 450 fixing. The DFA72 guide allows centering the DEFENDER

450: therefore, it is possible to use it as mounting template for point installations.

For example, it is possible to fix the Defender DF45001NF

Finishes: Brushed-steel-effect aluminium, matt aluminium, raw-finish aluminium
The Brushed-steel-effect is available only for profiles

up to 3000mm.
On demand (not available in stock): RAL finishes

9.5 A

Profileo
DFA 72

7

Example of mounting with DF45001NF and side casing DFS03
72 7
111.5
Note: see below the recommended drilling 7

100 200

72
36

Ø15.5

Art. Dimensions Drilling Hole Interaxis Q.ty
DFA7230NF 1 Pc
DFA7260NF 72 x 9.5 x A 3000 1 Pc
DFA7230 1 Pc
DFA7260 72 x 9.5 x A 6000 1 Pc

72 x 9.5 x A 3000 15 holes B 100 - C 200 Ø28

72 x 9.5 x A 6000 30 holes B 100 - C 200

DEFENDER DF45001NF PROFILE
FOR ON-GUIDE MOUNTING

Material: extruded aluminium (6063 T6)
Features: U-shaped structural profile for on-guide mounting
Finishes: raw-finish aluminium
On demand (not available in stock):

Brushed-steel-effect aluminium, matt aluminium,
RAL finishes

Recommended drilling: see diagram Ø15
72

Art. Dimensions Drilling Q.ty
DF45001NF
DF45001 111.5 x 72 x L 100 mm 1 Pc
1 Pc
42 >>> PRICE LIST REFERENCE PAGE 7 >>> 111.5 x 72 x L 100 mm 1 hole

DEFENDER SYSTEMS FOR
BALUSTRADES

B
C

101.6
GAP-COVERING EXTENSIONABLE CAP B
C
Features: fan extensionable cap to cover the gap between two glasses with a minimum

distance of 10 mm, maximum 25 mm. Composed by “V” underlying fan that help the positioning

in the gap and by fins that can be reduced to cover those spaces.

Finishing: black

A

101.6

Fin to
be reduced

A

Art. Dimensions Glass Q.ty

DFTEC88 B = with fin 18/26 mm - C = without fin 10/18.5 mm A = 17.5 mm 1 Pc
1 Pc
DFTEC1010 B = with fin 18/26 mm - C = without fin 10/18.5 mm A = 21.5 mm

>>> PRICE LIST REFERENCE PAGE 8 >>> 43

SYSTEMS FOR DEFENDER
BALUSTRADES

WATER DRAINING SYSTEM FOR FLOOR INSTALLATIONS

Material: aluminium 6060 T6 alloy

Water drainage system realized with the DFSA72 profile. It is supplied in 540mm sections,

drilled and anodized at 20 micron. Its dimensions allow leaving a 60mm gap to insert the

DFGD drainage grate. The profile is also available as 3 and 6m predrilled bars.

Finishes: Brushed-steel-effect aluminium, matt aluminium, raw-finish aluminium
The Brushed-steel-effect is available only for profiles up to 3000mm.

9.5 B A
C

72 Profileo
36 DFA 72

7

7
Ø15.5

60

DFGD

Art. Dimensions Drilling Hole Interaxis Q.ty
DFA72054
DFA7230 72 x 9.5 x A 540 3 holes B 70 - C 200 1 Pc
DFA7260 72 x 9.5 x A 3000 15 holes B 100 - C 200 1 Pc
72 x 9.5 x A 6000 30 holes B 100 - C 200 1 Pc

EXAMPLE OF DFA72054 AND DFSA180054 + DRAINAGE GRATE DFGD

44 >>> PRICE LIST REFERENCE PAGE 8 >>>

DEFENDER SYSTEMS FOR
BALUSTRADES

WATER DRAINING SYSTEM FOR SIDE INSTALLATIONS

Material: aluminium 6060 T6 alloy

Water drainage system realized with the DFSA72 profile.

It is supplied in 540mm sections, drilled and anodized PPrrooffiilloe DDFFSSAA 118800 7
at 20 micron. Its dimensions allow leaving a 60mm gap

o insert the DFGD drainage grate.

The profile is also available as 3 and 6m predrilled bars.

Finishes: Brushed-steel-effect aluminium, matt aluminium,

raw-finish aluminium

The Brushed-steel-effect is available only

for profiles up to 3000mm.

A
7 Ø15.5

182BC
62.6
10DFGD
16.5 960
5 6.5 5
Art. Dimensions Drilling Hole Interaxis Q.ty
DFSA180054
DFSA18030 182 x 7 x A 540 3 holes B 70 - C 200 1 Pc
DFSA18060 182 x 7 x A 3000 15 holes B 100 - C 200 1 Pc
182 x 7 x A 6000 30 holes B 100 - C 200 1 Pc

DRAINAGE GRATE 29 29
59
Material: Polymer
Dirt-trap grate to be inserted in water drainage systems DFA and DFSA. 69
The grate is supplied with line-engravings: by removing the fins it possible
C
to resize A, B, and C.
Finish: grey-aluminium effect, brushed steel effect.

AB

A BC

Art. Dimensions Q.ty
DFGD A 69 x 16.5 x 10 - B 69 x 11.5 x 10 - C 34,5 x 16.5 x 10 1 Pc

>>> PRICE LIST REFERENCE PAGE 8 >>> 45

SYSTEMS FORDEFENDER A
BALUSTRADES
CONCRETE SCREW
Ø28
Ø15Material: zinc-plated steel/ A4 stainless steel
BFeatures: high-performance mechanical screw.
CResistance class from C20/25 to C50/60.
For cracked and non-cracked concrete.
Package: 15 Pcs

ETA-11/0095 Fire resistance STAINLESS C
ETAG 001- 3 Classification STEEL B
Option1 for cracked concrete
R120

Anchoring types
See test report

Art. A-screw length B-ø drill hole C-Drill hole depth Wrench size Material Q.ty

DFFH10ZN 100 mm 10 mm 110 mm SW16 Zinc-plated steel 1 Kit
DFFH10A4 100 mm 10 mm 110 mm SW16 A4 stainless steel 1 Kit
DFFH12ZN 110 mm 12 mm 120 mm SW17 Zinc-plated steel 1 Kit
DFFH12A4 110 mm 12 mm 120 mm SW17 A4 stainless steel 1 Kit

DFFH10ZN Recommended nominal tightening torque Max. tightening torque with
DFFH10A4 of pulse screwdrivers [Nm] a torque or a ratchet key [Nm]
DFFH12ZN
DFFH12A4 300 40
300 40
450 60
450 60

Cracked concrete Non-cracked concrete

Max. traction Max. cutting Min. hole Min. edge Max. traction Max. cutting Min. hole Min. edge
load [kN] force [kN] interaxis [mm] distance [mm] load [kN] force [kN] interaxis [mm] distance [mm]

DFFH10ZN 7,6 16,2 70 70 13,5 16,2 70 70
70 13,5 19,0 70 70
DFFH10A4 7,6 19,0 70 80 17,2 20,0 80 80
80 17,2 23,3 80 80
DFFH12ZN 12,3 20,0 80

DFFH12A4 12,3 23,3 80

Further technical information available on www.loglimassimo.it

46 >>> PRICE LIST REFERENCE PAGE 8 >>>

DEFENDER SYSTEMS FOR
BALUSTRADES

SPIT GUARDIA MECHANICAL ANCHOR hmin
h0
Material: Stainless steel A4 - Zinc electroplated steel (for dry indoor environments only) def
Description: Ø12 torque - controlled expansion anchor (with expansion sleeve)
Application: C20/25 to C50/60 non-cracked concrete d0

L Sw
df Tinst

DFTAS

DFTASA4 ATE

Agrément Technique Européen

ATE Option 7

n° 07/0047

TECHNICAL DATA

Min. Max. thick Drilling Min. thick Ø Ø Total Max.
anchor of part to depth of base drill bit clearance anchor tighten
SPIT depth be fixed material length Torque
GUARDIA (mm) (mm) (mm) (mm) (mm) (mm) (mm) (Nm)

hef,min tfix ho hmin dO df L Tinst

DFTASA4 70 20 100 150 12 14 110 25
DFTAS
70 20 95 150 12 14 104 35

ANCHOR MECHANICAL PROPERTIES INSTALLATION

Cone DFTASA4 DFTAS

fuk (N/mm2) Min. tensile strength 500 1000

Threaded part DFTASA4 DFTAS

fuk (N/mm2) Min. tensile strength 700 550

Wel (mm3) Elastic section modulus 50 50

M0Rk,s (Nm) Characteristic bending moment 26 33

M (Nm) Recommended bending moment 10,8 13,7

SPIT CC - METHOD (VALUES ISSUED FROM ETA)

INFLUENCE OF SPACING FOR CONCRETE CONE RESISTANCE IN TENSILE LOAD

SPACING S Reduction factor s

NON-CRACKED CONCRETE

70 0,67

80 0,69

90 0,71

100 0,74 N
110 0,76

120 0,79

130 0,81

140 0,83

160 0,88 s Smin < S < Scr,N
190 0,95 Scr,N = 3.hef
S Must be used for each spacing
210 1,00

Art. Description Dimensions Q.ty

DFTASA4 A4 - For Indoor or outdoor application 12x110/20 1 Pc
12x105/20 1 Pc
DFTAS For dry indoor application

>>> PRICE LIST REFERENCE PAGE 8 >>> 47

DEFENDERSYSTEMS FOR
BALUSTRADES
max 3 mmLED
5 mm
DEFENDER can get a strip of high lightness LED
for the glass panel lighting up.

Use example:
• Better protection panel visibility even without any light
or at night time
• Spaces delimitation even with different colours
• More attractive balustrade

It’s recommended to use an extra thin high lightness LED of law
category equal to IP65 (6th class dust resistance, 5th class water jet)
Maximum thickness LED: 3 mm

Disclaimer: what is below reported is intended for information only and it is subject to updates and revisions
ANODIZING
Anodizing (anodic oxidation) is an electro-chemical process inducing the oxide formation (alumina) on the extruded profile surface.
Such treatment enhances the following features:
• Corrosion resistancy
• Surface hardness
• Abrasion resistancy
The oxide layer thickness sets the protection level: in the DEFENDER series the oxide layer has a thickness of 20um, which is the highest of the 4 level
classes according to UNI10681.2010, making it suitable for a urban and marine environment.
The finishes applied to the products only aim to an aesthetic goal and do not alter the protecting capacity of the process.
The anodizing process takes place once the profile cutting and drilling are done, in order to protect the surfaces involved in the latest processes.
Note:
Galvanic corrosion is an electro- chemical process taking place at the interface between two different metals in the presence of an electrolyte
(I.E. water). This process causes the dissolving of the metal with the lower electric potential, which in most common cases is aluminum.
This only happens with raw aluminum, hence not anodized.
MAINTENANCE AND CLEANING
The periodic cleaning of the product is important to maintain the original look. In a marine or polluted urban environment it is suggested to clean the
surfaces every three months: in other environments every 6 months. For indoor installations it is recommended to clean the surfaces at least once a year.
Cleaning instructions: use hot water and neutral soap, with a soft cloth or a non-abrasive sponge. Rinse with clean water. Wipe with a soft cloth.
Special care during the installation
• Use white spirit to remove dust, grease or any other type of residuals. Do not use abrasive materials.
• To protect milling and drilling areas from corrosion, use sealing material such as silicone or butyl, spray paint such as metallic zinc spray

or other corrosion inhibitors.
In case of winter installation, keep well in mind the natural thermal expansion that occurs during the summer: therefore, add suitable expansion
joints. The coefficient of expansion of aluminium is 2.3x10-5 °C1 :E.G. if the temperature increases by 35°C, the expansion of a 3 meter bar comes
to 2.3x10-5 °C1, that is 2.4 mm.

48

DEFENDER - STANDARD FIXING SYSTEMS FOR
BALUSTRADES
FLOOR FIXING

RECESS FIXING

SLAB FIXING
WITH SIDE AND
BOTTOM CLADDING

49

SYSTEMS FOR
BALUSTRADES

BALUSTRADES

50

SYSTEMS FOR
BALUSTRADES

BALUSTRADES
51

SYSTEMS FOR CONNECTIONS FOR BALUSTRADES WITH SLAB ANCHORING
BALUSTRADES

200 KAPPA SERIES S 26/31 10 20 R30 40
BRACKET FOR Ø4
BALUSTRADES WITH
Ø48 mm ADJUSTABLE 26 40 Ø48 ±5
SUPPORT SPACER 240 ±5
AISI 316 90 90
40 Ø3
Body structure: AISI 316 steel
Features: slab anchoring bracket for high
thickness glass with 2 x Ø48 mm single-point
fixing bosses of which a height adjustable
one. Four dead holes in Ø 3 mm head, 40
mm interaxis, allow to tighten the studs with
the special tool. Adjusting the spacers allows
to align the panels accurately.
The bracket is anchored via a sole M14 x
200 mm threaded bar (supplied) adjustable
by ± 5 mm in each direction.
Boss finish: satin-finished / polished steel
Bracket finish: satin-finished

Recommended tightening tool:

Art. UT300 / Art. CHSETT32

REGISTERED MODEL

Art. Boss Bracket Recommended glass hole For glass Q.ty
SB200K Ø48 mm interaxis 180 ± 5 mm L 60 mm x H 240 mm 1 Pc
Ø32 mm 17.52 / 21.52 mm

PARAPET HORIZONTAL STATIC LOAD STRENGTH ACCORDING TO INFRASTRUCTURE D.M. OF 14/01/2008

CONCLUSIONS: According to the test performed, based on the results obtained and according to what
is indicated in Table 3.1.II of Infrastructure D.M. dated 14/01/2008, the sample in question, consisting
of a parapet, limited to horizontal linear static load, complies with the requirements of Infrastructure DM
14/01/2008.

Fu = unit load per metre - Du = deformation under load

NOTE: According to UNI7967 of 2014 the immediate post-break glass collapse must be avoided,
hence it is no longer permitted to use the type of interlayer used in tests, without combining a
structural handrail. It is also possible to make balustrades without a handrail using a stiff structural
interlayer.

Du

Fu C B A

glass 10+10+1.52 PVB Tempered

Unit Total Deformation 980 1000 GLASS BREAKAGE
load load under load Du 70
Fu x L ABC 1290 378 kg
Fu (kN) (mm) (mm) (mm)
(kN/m) 53 Ø32
1.49 36.3 35.7 33.1
1.00 70
2.98 75 73 71
2.00 180
130

2.49 3.71 // // // 245 500 500 245

L =1490

RESULTS OBTAINED FROM THE BREAKAGE OF A SINGLE TEMPERED STRATIFIED PANEL.

52 >>> PRICE LIST REFERENCE PAGE 9 >>>

CONNECTIONS FOR BALUSTRADES WITH SLAB ANCHORING SYSTEMS FOR
BALUSTRADES
SB148 SERIES BRACKET 10 20
FOR BALUSTRADES R30
WITH Ø48 mm BOSS
AISI 316 40 ±5 90 90
240 Ø48
Body structure: AISI 316 steel
Features: slab anchoring bracket for high 40 ±5
thickness glass with 2 x Ø48 mm single-point
fixing bosses of which a height adjustable Ø3
one. Four dead holes in Ø 3 mm head, 40
mm interaxis, allow to tighten the studs with
the special tool. The bracket is anchored via a
sole M14 x 200 mm threaded bar (supplied)
adjustable by ± 5 mm in each direction. For
glass thickness 17.52 / 21.52 / 25.52 mm
request 2 x M12 screws length 30/35/40
mm, respectively.
Boss finish: satin-finished / polished steel
Bracket finish: satin-finished

Recommended tightening tool:

Art. UT300

40

S 33

REGISTERED MODEL

Art. Boss Bracket Recommended glass hole For glass Q.ty
SB148 Ø48 mm interaxis 180 ± 5 mm L 60 mm x H 240 mm 1 Pc
Ø32 mm 17.52 / 25.52 mm

PARAPET HORIZONTAL STATIC LOAD STRENGTH ACCORDING TO INFRASTRUCTURE D.M. OF 14/01/2008

CONCLUSIONS: According to the test performed, based on the results obtained and according to what
is indicated in Table 3.1.II of Infrastructure D.M. dated 14/01/2008, the sample in question, consisting
of a parapet, limited to horizontal linear static load, complies with the requirements of Infrastructure DM
14/01/2008.

Fu = unit load per metre - Du = deformation under load

NOTE: According to UNI7967 of 2014 the immediate post-break glass collapse must be avoided,
hence it is no longer permitted to use the type of interlayer used in tests, without combining a
structural handrail. It is also possible to make balustrades without a handrail using a stiff structural
interlayer.

Du CB A
Fu
glass 10+10+1.52 PVB Tempered

Unit Total Deformation 130 180 980 33 1290 GLASS BREAKAGE
load load under load Du 1000
337 kg
Fu Fu x L ABC
(kN/m) Ø32
(kN) (mm) (mm) (mm)
1.00
1.49 35.2 35.2 34.4 70
2.00
2.98 73 75 72
2.22 3.31
245 500 500 245

// // // L = 1490

RESULTS OBTAINED FROM THE BREAKAGE OF A SINGLE TEMPERED STRATIFIED PANEL.

>>> PRICE LIST REFERENCE PAGE 9 >>> 53

SYSTEMS FOR SINGLE-POINT CONNECTIONS FOR BALUSTRADES WITH SPACER
BALUSTRADES
54

SINGLE-POINT CONNECTIONS FOR BALUSTRADES WITH SPACER SYSTEMS FOR
BALUSTRADES

STUDDED SINGLE-POINT CONNECTION WITH ADJUSTABLE
SUPPORT SPACER Ø60 mm AISI 316

Body structure: AISI 316 stainless steel.

Features: single-point fixing with Ø 60 mm boss and adjustable support spacer with 8 mm extension. Four dead holes in Ø 3 mm head, 30 mm

interaxis, allow tightening the studs with the special tool. The system is anchored to the wall via a M14 x 140 mm threaded bar SUPPLIED. The spacer

is fitted with a slot for ± 5 mm adjustments in every direction.

Finish: polished steel, satin-finished steel

Recommended tightening tool: Art. UT300 ±5

15

10

Ø60
Ø53

43/51

9
Ø25

Ø60

Art. Dimensions Recommended glass hole For glass Q.ty
ATP60 Ø60 mm x 43/51 mm Ø32 mm minimum 17.52 / 25.52 mm 1 Pc

PARAPET HORIZONTAL STATIC LOAD STRENGTH ACCORDING TO INFRASTRUCTURE D.M. OF 14/01/2008

CONCLUSIONS: According to the test performed, based on the results obtained and according to what
is indicated in Table 3.1.II of Infrastructure D.M. dated 14/01/2008, the sample in question, consisting
of a parapet, limited to horizontal linear static load, complies with the requirements of Infrastructure DM
14/01/2008.

Fu = unit load per metre - Du = deformation under load

NOTE: According to UNI7967 of 2014 the immediate post-break glass collapse must be avoided,
hence it is no longer permitted to use the type of interlayer used in tests, without combining a
structural handrail. It is also possible to make balustrades without a handrail using a stiff structural
interlayer.

Du

Fu C B A

glass 10+10+1.52 PVB Tempered

Unit Total Deformation 1070 1000 GLASS BREAKAGE
load load under load Du 70
Fu x L ABC 1290 343 kg
Fu (kN) (mm) (mm) (mm)
(kN/m) 43 Ø32
1.49 37.5 37.3 35.5
1.00 70
2.98 81 81 79
2.00 120
3.37 100
2.26
// // // 245 500 500 245
L = 1490
RESULTS OBTAINED FROM THE BREAKAGE OF A SINGLE TEMPERED STRATIFIED PANEL.

>>> PRICE LIST REFERENCE PAGE 9 >>> 55

SYSTEMS FOR SINGLE-POINT CONNECTIONS FOR BALUSTRADES WITH SPACER
BALUSTRADES
EVODR

• Balustrade point fixing with Ø50 mm stud
for 17.52 / 25.52 mm glass thickness
• Wall anchoring with M12 rod. NOT INCLUDED
• Adjustable wall to glass distance: up to 10 mm
• Adjustable wall positioning: +/- 4 mm every direction
• Stud tightening through hook wrench with Ø4 mm pin
• EPDM gaskets
• Material: stainless steel AISI304 / AISI316

STUDDED POINT FIXING Ø50 mm
WITH ADJUSTABLE SUPPORTING SPACER - AISI304 / AISI316 STAINLESS STEEL

Material: AISI 304 / AISI316 stainless steel
Features: point fixing with Ø50 mm stud and adjustable supporting spacer Ø50 mm and 10 mm lengthening. EPDM gaskets.
Wall fixing accessories (threaded bar, split, screw,…) NOT INCLUDED.
Finish: CNC steel

Suggested tightening tool: Art. CHSETT32

10 30/40 (+10*) +/- 4

Ø25
Ø50

Ø4
+/- 4

Ø12.5

17.5/25.5

Art. Dimensions Suggested glass hole For glass Material Q.ty

EVODR304 Ø50 mm H 30/40 mm 32 mm 17.52 / 25.52 mm AISI 304 1Pc
EVODR316 Ø50 mm H 30/40 mm 32 mm 17.52 / 25.52 mm AISI 316 1Pc

SPACER FOR EVODR POINT FIXING

Material: AISI 304 / AISI316 stainless steel

Features: Spacer to increase the distance between wall and point fixing by 10 mm (compatible with EVODR point fixing).

It is possible to stack more than one of them to obtain the required thickness (1 spacer 10 mm, 2 spacers 20 mm,…)

Finish: CNC steel

Ø50

10

Ø21

Art. Dimensions Material Q.ty

EVODR304DIST Ø50 mm H 10 mm AISI 304 1Pc
EVODR316DIST Ø50 mm H 10 mm AISI 316 1Pc

56 >>> PRICE LIST REFERENCE PAGE 9 >>>

SINGLE-POINT CONNECTIONS FOR BALUSTRADES WITH SPACER SYSTEMS FOR
BALUSTRADES
57

SYSTEMS FOR
BALUSTRADES
Ø4
26/31 S
Ø4
26/31 S
SINGLE-POINT CONNECTIONS FOR BALUSTRADES WITH SPACER

STUDDED Ø48 mm SINGLE-POINT CONNECTION SB40/SB48 WITH ADJUSTABLE
SUPPORT SPACER AISI 316

Body structure: AISI 316 stainless steel

Features: single-point fixing with Ø 48 mm boss and Ø48 mm adjustable support spacer with 5 mm extension. Four dead holes in Ø 3 mm head,

40 mm interaxis, allow tightening the studs with special tool. The system is anchored to the wall via an M12 threaded bar NOT SUPPLIED.

Finish: polished steel, satin-finished steel

Recommended tightening tool:
Art. UT300 / Art. CHSETT32

SB40DR SB48DR

26 26

40 40

Ø3 Ø48 Ø3 Ø48
40 40

Art. Dimensions Glass hole For glass Q.ty
SB40DR
SB48DR Ø48 mm H 26/31 mm Ø32 mm 17.52 / 21.52 mm 1 Pc
Ø48 mm H 26/31 mm Ø32 mm 21.52 / 25.52 mm 1 Pc

PARAPET HORIZONTAL STATIC LOAD STRENGTH ACCORDING TO INFRASTRUCTURE D.M. OF 14/01/2008

CONCLUSIONS: According to the test performed, based on the results obtained and according to what
is indicated in Table 3.1.II of Infrastructure D.M. dated 14/01/2008, the sample in question, consisting
of a parapet, limited to horizontal linear static load, complies with the requirements of Infrastructure DM
14/01/2008.

Fu = unit load per metre - Du = deformation under load

NOTE: According to UNI7967 of 2014 the immediate post-break glass collapse must be avoided,
hence it is no longer permitted to use the type of interlayer used in tests, without combining a
structural handrail. It is also possible to make balustrades without a handrail using a stiff structural
interlayer.

Du CB A
Fu
glass 10+10+1.52 PVB Tempered

Unit Total Deformation 1070 1290 GLASS BREAKAGE
load load under load Du 1000
25/30 371 kg
Fu Fu x L ABC
(kN/m) Ø32
(kN) (mm) (mm) (mm)
1.00
1.49 33.8 35.7 36.6 70

2.00 2.98 74 75 78 100 120

2.44 3.64 // // // 245 500 500 245
L = 1490

RESULTS OBTAINED FROM THE BREAKAGE OF A SINGLE TEMPERED STRATIFIED PANEL.

58 >>> PRICE LIST REFERENCE PAGE 9 >>>

SINGLE-POINT CONNECTIONS FOR BALUSTRADES WITH SPACER SYSTEMS FOR
BALUSTRADES
59

SYSTEMS FOR SINGLE-POINT CONNECTIONS FOR BALUSTRADES WITH SPACER
BALUSTRADES
STUDDED SINGLE-POINT CONNECTION WITH ADJUSTABLE SUPPORT
SPACER Ø50 mm AISI 304

Body structure: AISI 304 stainless steel
Features: single-point fixing with Ø50 mm boss and Ø50 mm adjustable support spacer with 8 mm extension. Four dead holes in Ø 3 mm head,
40 mm interaxis, allow tightening the studs with the special tool. Anchoring via an M14 x 140 mm threaded bar (supplied).
Finish: CNC steel
Recommended tightening tool: Art. UT300

Ø50
M14

42/50

5.5

Ø32
Ø50

Art. Dimensions Recommended glass hole For glass Q.ty
ATP50 Ø50 mm x 42/50 mm Ø36 mm minimum 17.52 mm 1 Pc

PARAPET HORIZONTAL STATIC LOAD STRENGTH ACCORDING TO INFRASTRUCTURE D.M. OF 14/01/2008

CONCLUSIONS: According to the test performed, based on the results obtained and according to what
is indicated in Table 3.1.II of Infrastructure D.M. dated 14/01/2008, the sample in question, consisting
of a parapet, limited to horizontal linear static load, complies with the requirements of Infrastructure DM
14/01/2008.

Fu = unit load per metre - Du = deformation under load

NOTE: According to UNI7967 of 2014 the immediate post-break glass collapse must be avoided,
hence it is no longer permitted to use the type of interlayer used in tests, without combining a
structural handrail. It is also possible to make balustrades without a handrail using a stiff structural
interlayer.

Du CB A
Fu
glass 10+10+1.52 PVB Tempered

Unit Total Deformation 1070 1290 GLASS BREAKAGE
load load under load Du 1000
294 kg
Fu Fu x L ABC
(kN/m) 42/50
(kN) (mm) (mm) (mm)
1.00
Ø36

1.49 33.4 32.6 31.5 70

1.94 2.89 // // // 100 120

245 500 500 245

L = 1490
RESULTS OBTAINED FROM THE BREAKAGE OF A SINGLE TEMPERED STRATIFIED PANEL.

60 >>> PRICE LIST REFERENCE PAGE 9 >>>

SINGLE-POINT CONNECTIONS FOR BALUSTRADES WITH SPACER SYSTEMS FOR
BALUSTRADES

COUNTERSUNK SINGLE-POINT CONNECTION WITH ADJUSTABLE SUPPORT
SPACER Ø50 mm AISI 304

Body structure: AISI 304 stainless steel

Features: single-point fixing with Ø45 mm countersunk boss and Ø50 mm adjustable support spacer with 8 mm extension. Four dead holes in Ø 3

mm head, 25 mm interaxis, allow tightening the studs with the special tool. Anchoring via an M14 x 140 mm threaded bar (supplied).

Finish: CNC steel

Recommended tightening tool: Art. UT300 Optional

Ø 30.2

4

Ø 50

Art. Q.ty

ATP453 1 Pc

Ø50
M14

42/50

Ø30 5.5
Ø45

Art. Dimensions Recommended glass hole For glass Q.ty
ATP45 Ø50 mm x 42/50 mm Ø35 mm countersunk 5 mm deep
minimum 21.52 mm / 17.52 with optional ATP453 1 Pc

PARAPET HORIZONTAL STATIC LOAD STRENGTH ACCORDING TO INFRASTRUCTURE D.M. OF 14/01/2008

CONCLUSIONS: According to the test performed, based on the results obtained and according to what
is indicated in Table 3.1.II of Infrastructure D.M. dated 14/01/2008, the sample in question, consisting
of a parapet, limited to horizontal linear static load, complies with the requirements of Infrastructure DM
14/01/2008.

Fu = unit load per metre - Du = deformation under load

NOTE: According to UNI7967 of 2014 the immediate post-break glass collapse must be avoided,
hence it is no longer permitted to use the type of interlayer used in tests, without combining a
structural handrail. It is also possible to make balustrades without a handrail using a stiff structural
interlayer.

Du

Fu C B A

glass 10+10+1.52 PVB Tempered

Unit Total Deformation 1070 1000 GLASS BREAKAGE
load load under load Du 70
1290 260 kg
Fu Fu x L ABC
(kN/m) 41.5 Ø35sv5
(kN) (mm) (mm) (mm)
1.00 70

1.71 1.49 39.3 39.8 38.1

2.55 // // // 120
100

245 500 500 245
RESULTS OBTAINED FROM THE BREAKAGE OF A SINGLE TEMPERED STRATIFIED PANEL. L = 1490

>>> PRICE LIST REFERENCE PAGE 9 >>> 61

SYSTEMS FOR SINGLE-POINT CONNECTIONS FOR BALUSTRADES WITH SPACER
BALUSTRADES

SINGLE-POINT CONNECTION WITH Ø50 BOSS AISI 304

Material: AISI 304 steel
Features: fixing point for high thickness glass panels with Ø50 mm boss, supplied with M14 x 140 mm long bar.
Glass hole: 28 mm. Minimum glass thickness: 6+6+1.52 / 5+5+1.52 with optional ATP452
Finish: CNC steel

Recommended tightening tool: Art. UT300

Optional

Ø 24

A Ø 50
A4
Art. Q.ty

ATP452 1 Pc

M14

M14 Ø 23.2
Ø 23.2

ATP515 ATP565 ATP5215 ATP5365 Ø3 Ø3
Ø 50 Ø 50

Art. Dimensions Minimum glass thickness Recommended glass hole Q.ty

ATP515 A 1.5 mm 6+6+1.52 / 5+5+1.52 with optional ATP452 28 mm 1 Pc
6+6+1.52 / 5+5+1.52 with optional ATP452 28 mm 1 Pc
ATP565 A 6.5 mm 6+6+1.52 / 5+5+1.52 with optional ATP452 28 mm 1 Pc
6+6+1.52 / 5+5+1.52 with optional ATP452 28 mm 1 Pc
ATP5215 A 21.5 mm

ATP5365 A 36.5 mm

Ø45 COUNTERSUNK SINGLE-POINT CONNECTION AISI 304

Material: AISI 304 steel
Features: fixing point for high thickness glass panels with Ø45 mm countersunk connector, supplied with M14 x 140 mm long bar. Glass hole: 35 mm
countersunk 5 mm deep. Minimum glass thickness: 8+8+1.52 / 6+6+1.52 with optional ATP453
Finish: CNC steel

Recommended tightening tool: Art. UT300

Optional

Ø 30.2

6.4 Ø 50
A
Art. Q.ty
6.4
A4ATP453 1 Pc

M14

M14 Ø 32.2 Ø 32.2

ATP415 ATP465 ATP4215 ATP4365 Ø3 Ø3
Ø 45 Ø 45

Art. Dimensions Minimum glass thickness Recommended glass hole Q.ty

ATP415 A 1.5 mm 8+8+1.52 / 6+6+1.52 with optional ATP453 35 countersink 5 mm 1 Pc
8+8+1.52 / 6+6+1.52 with optional ATP453 35 countersink 5 mm 1 Pc
ATP465 A 6.5 mm 8+8+1.52 / 6+6+1.52 with optional ATP453 35 countersink 5 mm 1 Pc
8+8+1.52 / 6+6+1.52 with optional ATP453 35 countersink 5 mm 1 Pc
ATP4215 A 21.5 mm

ATP4365 A 36.5 mm

62 >>> PRICE LIST REFERENCE PAGE 10 >>>

SINGLE-POINT CONNECTIONS FOR BALUSTRADES WITH SPACER SYSTEMS FOR
BALUSTRADES
SINGLE-POINT CONNECTION WITH Ø50 BOSS WITH NECK - AISI 304

Material: AISI 304 steel
Features: fixing point for high thickness glass panels with Ø50 mm boss and supporting neck for 15 mm high glass, supplied with M14 x 140 mm
long bar. Glass hole: 36 mm. Minimum glass thickness: 8+8+1.52
Finish: CNC steel
Recommended tightening tool: Art. UT300

M14

M14 A
A
Ø 32.2 Ø 32.2

ATP50365 ATP503215 ATP503365 Ø3 Ø3
Ø 50 Ø 50

Art. Dimensions Minimum glass thickness Recommended glass hole Q.ty

ATP50315 A 1.5 mm 8+8+1.52 36 mm 1 Pc
8+8+1.52 36 mm 1 Pc
ATP50365 A 6.5 mm 8+8+1.52 36 mm 1 Pc
8+8+1.52 36 mm 1 Pc
ATP503215 A 21.5 mm

ATP503365 A 36.5 mm

Ø45 COUNTERSUNK SINGLE-POINT CONNECTION WITH NECK - AISI 304

Material: AISI 304 steel
Features: fixing point for glass panels with Ø45 mm countersunk connector and supporting neck for 15 mm high glass, supplied with M14 x 140 mm
long bar. Glass hole: 35 mm countersunk 5 mm deep. Minimum glass thickness: 10+10+1.52 / 8+8+1.52 with optional ATP453.
Finish: CNC steel

Recommended tightening tool: Art. UT300

Optional

Ø 30.2

6.4 Ø 50
A
Art. Q.ty
6.4
A4ATP453 1 Pc

M14

M14

Ø 32.2 Ø 32.2

ATP45365 ATP453215 ATP453365 Ø3 Ø3
Ø 45 Ø 45

Art. Dimensions Minimum glass thickness Recommended glass hole Q.ty

ATP45315 A 1.5 mm 10+10+1.52 / 8+8+1.52 with optional ATP453 35 countersink 5 mm 1 Pc
10+10+1.52 / 8+8+1.52 with optional ATP453 35 countersink 5 mm 1 Pc
ATP45365 A 6.5 mm 10+10+1.52 / 8+8+1.52 with optional ATP453 35 countersink 5 mm 1 Pc
10+10+1.52 / 8+8+1.52 with optional ATP453 35 countersink 5 mm 1 Pc
ATP453215 A 21.5 mm

ATP453365 A 36.5 mm

>>> PRICE LIST REFERENCE PAGE 10 >>> 63

SYSTEMS FOR
BALUSTRADES
B
A
SINGLE-POINT CONNECTIONS FOR BALUSTRADES WITH SPACER

FIXING CONNECTOR 45

Material: AISI 304 stainless steel with white PVC gasket. Bar processed
Features: Ø45 mm countersunk connector for high thickness glass panels,
with M14 x 9 mm threaded hole. Glass hole: 35 mm countersunk 5 mm deep.
Finish: CNC steel with white PVC
Recommended tightening tool: Art. UT300

C

Art. Dimensions D
A
COFIS45B A 45 mm B 15 mm C M14 D 3 mm
Q.ty
SUPPORT SPACER D 1 Pc
C
Material: AISI 304 steel E
Features: spacer cylinder.
Two dead holes allow inserting the special A
wrench to aid tightening. CD
Finish: CNC steel B

Recommended tightening tool: Art. UT300

Art. Dimensions DISTQ-CO.tFyIS

DISTCOFIS11 A 50 mm B 20 mm C M14 D 3 mm E 40 mm 1 Pc
1 Pc
DISTCOFIS12 A 50 mm B 35 mm C M14 D 3 mm E 40 mm

ADJUSTABLE SUPPORT SPACER

Material: AISI 304 steel
Features: spacer cylinder with the possibility to adjust the distance from the wall by 8 mm.
Two dead holes allow inserting the special wrench to aid both tightening and adjusting.
Finish: CNC steel

Recommended tightening tool: Art. UT300

G

C

Art. Dimensions Adjustment FB
B 40/48 mm
DISTCOFISR A 50 mm C M14 D 3 mm E 40 mm F 30 mm G 43 mm D
E
A

Q.ty
1 Pc

64 >>> PRICE LIST REFERENCE PAGE 10 >>>

SINGLE-POINT CONNECTIONS FOR BALUSTRADES WITH SPACER SYSTEMS FOR
BALUSTRADES
65

SYSTEMS FOR
BALUSTRADES
41 13
15 9
13.5/21.5
SINGLE-POINT CONNECTIONS FOR BALUSTRADES WITH SPACER

DISTB50 CYLINDRICAL SPACER WITH NECK AND RETAINING BOSS

Material: AISI 304 steel
Features: cylindrical spacer with neck and glass retaining boss + tapered head screw with hexagon socket.
Two dead holes allow inserting the special wrench to aid tightening.
Wall anchoring via an M12 threaded bar NOT SUPPLIED
Finish: CNC steel
Recommended tightening tool: Art. UT300

Ø28 M12x35

Ø3.1
40

M12
Ø50

Art. Dimensions Recommended glass hole For glass Q.ty
DISTB50 Ø50 mm H 41 mm Ø32 mm 17.52 / 21.52 mm 1 Pc

PARAPET HORIZONTAL STATIC LOAD STRENGTH ACCORDING TO INFRASTRUCTURE D.M. OF 14/01/2008

CONCLUSIONS: According to the test performed, based on the results obtained and according to what
is indicated in Table 3.1.II of Infrastructure D.M. dated 14/01/2008, the sample in question, consisting
of a parapet, limited to horizontal linear static load, complies with the requirements of Infrastructure DM
14/01/2008.

Fu = unit load per metre - Du = deformation under load

NOTE: According to UNI7967 of 2014 the immediate post-break glass collapse must be avoided,
hence it is no longer permitted to use the type of interlayer used in tests, without combining a
structural handrail. It is also possible to make balustrades without a handrail using a stiff structural
interlayer.

Du CB A
Fu
glass 10+10+1.52 PVB Tempered

Unit Total Deformation 1070 1290 GLASS BREAKAGE
load load under load Du 1000
41 323 kg
Fu Fu x L ABC
(kN/m)
(kN) (mm) (mm) (mm)
1.00
1.49 31.4 32.6 31.5 70 Ø32

2.00 2.98 59 63 60 100 120

2.13 3.17 // // // 245 500 500 245

L = 1490

RESULTS OBTAINED FROM THE BREAKAGE OF A SINGLE TEMPERED STRATIFIED PANEL.

66 >>> PRICE LIST REFERENCE PAGE 10 >>>


Click to View FlipBook Version
Previous Book
www2.math.umd.edu
Next Book
joe - community art