Logli Massimo

SINGLE-POINT CONNECTIONS FOR BALUSTRADES WITH SPACER SYSTEMS FOR
BALUSTRADES
DISTB40 CYLINDRICAL SPACER WITH NECK AND RETAINING BOSS

Material: AISI 304 steel
Features: cylindrical spacer with neck and glass retaining boss + tapered head screw with hexagon socket.
Two dead holes allow inserting the special wrench to aid tightening.
Wall anchoring via an M10 threaded bar NOT SUPPLIED
Finish: CNC steel
Recommended tightening tool: Art. UT300

41 13Ø19 M10x35
15 8
13.5/21.5 Ø3.1
32

M10

Ø40

Art. Dimensions Recommended glass hole For glass Q.ty
DISTB40 Ø40 mm H 41 mm Ø24 mm 17.52 / 21.52 mm 1 Pc

PARAPET HORIZONTAL STATIC LOAD STRENGTH ACCORDING TO INFRASTRUCTURE D.M. OF 14/01/2008

CONCLUSIONS: According to the test performed, based on the results obtained and according to what
is indicated in Table 3.1.II of Infrastructure D.M. dated 14/01/2008, the sample in question, consisting
of a parapet, limited to horizontal linear static load, complies with the requirements of Infrastructure DM
14/01/2008.

Fu = unit load per metre - Du = deformation under load

NOTE: According to UNI7967 of 2014 the immediate post-break glass collapse must be avoided,
hence it is no longer permitted to use the type of interlayer used in tests, without combining a
structural handrail. It is also possible to make balustrades without a handrail using a stiff structural
interlayer.

Du CB A
Fu
glass 10+10+1.52 PVB Tempered

Unit Total Deformation 1070 1290 GLASS BREAKAGE
load load under load Du 1000
285 kg
Fu Fu x L ABC
(kN/m) 41
(kN) (mm) (mm) (mm)
1.00
Ø24
1.88
1.49 28.9 30.1 29.3 70

2.80 // // // 100 120

245 500 500 245

L = 1490
RESULTS OBTAINED FROM THE BREAKAGE OF A SINGLE TEMPERED STRATIFIED PANEL.

>>> PRICE LIST REFERENCE PAGE 10 >>> 67

SYSTEMS FOR
BALUSTRADES
31 11
15 6
13.5/21.5
SINGLE-POINT CONNECTIONS FOR BALUSTRADES WITH SPACER

DISTB30 CYLINDRICAL SPACER WITH NECK AND RETAINING BOSS

Material: AISI 304 steel
Features: cylindrical spacer with neck and glass retaining boss + tapered head screw with hexagon socket.
Two dead holes allow inserting the special wrench to aid tightening.
Wall anchoring via an M8 threaded bar NOT SUPPLIED
Finish: CNC steel
Recommended tightening tool: Art. UT200

Ø17 M8x25
Ø2.1
24

M8

Ø30

Art. Dimensions Recommended glass hole For glass Q.ty
DISTB30 Ø30 mm H 31 mm Ø22 mm 13.52/21.52 mm 1 Pc

PARAPET HORIZONTAL STATIC LOAD STRENGTH ACCORDING TO INFRASTRUCTURE D.M. OF 14/01/2008

CONCLUSIONS: According to the test performed, based on the results obtained and according to what
is indicated in Table 3.1.II of Infrastructure D.M. dated 14/01/2008, the sample in question, consisting
of a parapet, limited to horizontal linear static load, complies with the requirements of Infrastructure DM
14/01/2008.

Fu = unit load per metre - Du = deformation under load

NOTE: According to UNI7967 of 2014 the immediate post-break glass collapse must be avoided,
hence it is no longer permitted to use the type of interlayer used in tests, without combining a
structural handrail. It is also possible to make balustrades without a handrail using a stiff structural
interlayer.

Du CB A
Fu
glass 10+10+1.52 PVB Tempered

Unit Total Deformation 1070 1290 GLASS BREAKAGE
load load under load Du 1000
236 kg
Fu Fu x L ABC 31
(kN/m) Ø22
(kN) (mm) (mm) (mm)
1.00
1.49 30.6 31.6 30.7 70

1.56 2,32 // // // 100 120

245 500 500 245

L = 1490
RESULTS OBTAINED FROM THE BREAKAGE OF A SINGLE TEMPERED STRATIFIED PANEL.

68 >>> PRICE LIST REFERENCE PAGE 10 >>>

SINGLE-POINT CONNECTIONS FOR BALUSTRADES WITH SPACER SYSTEMS FOR
BALUSTRADES
MDMAC 52 SPACER WITHOUT NECK

Material: AISI 304 stainless steel, bar processed
Spacer with 40 mm long screw and glass clamping boss.
Screw M10 x 40 mm allows clamping glass of thickness between 10 and 17.5 mm.
Wall anchoring via an M10 threaded bar NOT SUPPLIED
Finish: CNC steel

B D
E F

C
A

Art. Dimensions Recommended glass hole Q.ty
Ø15 mm 1 Pc
MDMAC52 A Ø35 B 40 C M10 D M10 countersunk head screw E 10 F Ø10.5 mm

PARAPET HORIZONTAL STATIC LOAD STRENGTH ACCORDING TO INFRASTRUCTURE D.M. OF 14/01/2008

CONCLUSIONS: According to the test performed, based on the results obtained and according to what
is indicated in Table 3.1.II of Infrastructure D.M. dated 14/01/2008, the sample in question, consisting
of a parapet, limited to horizontal linear static load, complies with the requirements of Infrastructure DM
14/01/2008.

Fu = unit load per metre - Du = deformation under load

NOTE: According to UNI7967 of 2014 the immediate post-break glass collapse must be avoided,
hence it is no longer permitted to use the type of interlayer used in tests, without combining a
structural handrail. It is also possible to make balustrades without a handrail using a stiff structural
interlayer.

Du CB A
Fu
glass 10+10+1.52 PVB Tempered

Unit Total Deformation 1070 1290 GLASS BREAKAGE
load load under load Du 1000
254 kg
Fu Fu x L ABC
(kN/m) 40
(kN) (mm) (mm) (mm)
1.00
70 Ø15
1.67
1.49 38.1 39.4 37.9 100 120 Ø15

2.49 // // //

245 500 500 245

L = 1490
RESULTS OBTAINED FROM THE BREAKAGE OF A SINGLE TEMPERED STRATIFIED PANEL.

>>> PRICE LIST REFERENCE PAGE 10 >>> 69

SYSTEMS FOR
BALUSTRADES
A
Ø4
30.5 8.5
SINGLE-POINT CONNECTIONS FOR BALUSTRADES WITH SPACER

MAW50 SPACER WITHOUT NECK

Material: AISI 304 stainless steel,
Features: Die-cast body.
Screw: bar processed with a Ø4 mm blind hole in the head in order to screw it to the body via a special pin spanner. Wall anchoring via an M10
threaded bar NOT SUPPLIED
Finish: polished steel, satin-finished steel

Recommended tightening tool: Art. CHSETT32

A=A1=010- 1- 515cownitghradnooweMll1M0x1300xm30mmm
AA==1100--2211.,55cwointhgdraonwoeMll M101x04x04m0mmm

Ø12.5

M10
Ø47

Art. Dimensions min glass hole Q.ty
MAW50 Ø47 mm H 30 mm Ø17 mm 1 Pc

PARAPET HORIZONTAL STATIC LOAD STRENGTH ACCORDING TO INFRASTRUCTURE D.M. OF 14/01/2008

CONCLUSIONS: According to the test performed, based on the results obtained and according to what
is indicated in Table 3.1.II of Infrastructure D.M. dated 14/01/2008, the sample in question, consisting
of a parapet, limited to horizontal linear static load, complies with the requirements of Infrastructure DM
14/01/2008.

Fu = unit load per metre - Du = deformation under load

NOTE: According to UNI7967 of 2014 the immediate post-break glass collapse must be avoided,
hence it is no longer permitted to use the type of interlayer used in tests, without combining a
structural handrail. It is also possible to make balustrades without a handrail using a stiff structural
interlayer.

Du CB A
Fu
glass 10+10+1.52 PVB Tempered

Unit Total Deformation 1070 1290 GLASS BREAKAGE
load load under load Du 1000
279 kg
Fu Fu x L ABC
(kN/m) 30
(kN) (mm) (mm) (mm)
1.00
70 Ø17

1.49 32.2 32.4 31.1 100 120

1.84 2.74 // // //

245 500 500 245

L = 1490

RESULTS OBTAINED FROM THE BREAKAGE OF A SINGLE TEMPERED STRATIFIED PANEL.

70 >>> PRICE LIST REFERENCE PAGE 10 >>>

SINGLE-POINT FIXINGS SYSTEMS FOR
BALUSTRADES
71

SYSTEMS FOR UPRIGHTS FOR CLAMPS - LABORATORY TESTS
BALUSTRADES
PARAPET UPRIGHTS MQ606LIN MODEL WITH M8 THREADED HOLES
FOR MGSR11 CLAMPS - SPACING 1500 mm

Glass: 6.6.4 PVB Tempered
Accessories: MQ606LIN-AISI316 + 4x MGSR11

PARAPET HORIZONTAL STATIC LOAD STRENGTH ACCORDING TO INFRASTRUCTURE
D.M. OF 14/01/2008

CONCLUSIONS:
According to the test performed, based on the results obtained and according to what is indicated in Table 3.1.II of Infrastructure D.M. dated
14/01/2008, the sample in question, consisting of a parapet, limited to horizontal linear static load, complies with the requirements of Infrastructure
DM 14/01/2008.

Fu = unit load per metre L=1390

Fu ABC D E FGH

47.5 185 185 185 185 185 185 185 47.5
glass 6+6+1.52 PVB Tempered

1002.5
910
TOTAL LOAD 650
3,4kN
92.5
Ground level

i=1500
RESULTS OBTAINED FROM THE BREAKAGE OF A SINGLE TEMPERED STRATIFIED PANEL.

72

UPRIGHTS FOR CLAMPS - LABORATORY TESTS SYSTEMS FOR
BALUSTRADES
PARAPET UPRIGHTS MQ706LIN MODEL WITH M10 THREADED HOLES
FOR MGSR31 CLAMPS - SPACING 1200 mm

Glass: 10.10.4 PVB Tempered
Accessories: MQ706LIN-AISI316 + 4x MGSR31

PARAPET HORIZONTAL STATIC LOAD STRENGTH ACCORDING TO INFRASTRUCTURE
D.M. OF 14/01/2008

CONCLUSIONS:
According to the test performed, based on the results obtained and according to what is indicated in Table 3.1.II of Infrastructure D.M. dated
14/01/2008, the sample in question, consisting of a parapet, limited to horizontal linear static load, complies with the requirements of Infrastructure
DM 14/01/2008.

Fu = unit load per metre L=1090

Fu AB CD E F

45 200 200 200 200 200 45
glass 10+10+1.52 PVB Tempered

999.5
910
TOTAL LOAD 650
5,3kN
89.5
Ground level
i=1200
RESULTS OBTAINED FROM THE BREAKAGE OF A SINGLE TEMPERED STRATIFIED PANEL.

73

SYSTEMS FOR PARAPET UPRIGHTS MODEL FOR SERIES ATT - LABORATORY TESTS
BALUSTRADES
PARAPET UPRIGHTS MQ504 MODEL WITH M8 THREADED HOLES
FOR ATT50+FIXBORK40 - SPACING1200 mm

Glass: 6.6.4 PVB Tempered
Accessories: MQ504-AISI316 + 2x ATT50 + 4x FIXBORK40 + 4x FIXGHIERA40

PARAPET HORIZONTAL STATIC LOAD STRENGTH ACCORDING TO INFRASTRUCTURE
D.M. OF 14/01/2008

CONCLUSIONS:
According to the test performed, based on the results obtained and according to what is indicated in Table 3.1.II of Infrastructure D.M. dated
14/01/2008, the sample in question, consisting of a parapet, limited to horizontal linear static load, complies with the requirements of Infrastructure
DM 14/01/2008.

Fu = unit load per metre

1190

Fu A B C D E F G

55 180 180 180 180 180 180 55
glass 6+6+1.52 PVB Tempered

1000 TOTAL LOAD 620
910 2,5kN

1090 Ø22

90 Ground level
150

i=1200

RESULTS OBTAINED FROM THE BREAKAGE OF A SINGLE TEMPERED STRATIFIED PANEL.

74

PARAPET UPRIGHTS MODEL FOR SERIES ATT - LABORATORY TESTS SYSTEMS FOR
BALUSTRADES
PARAPET UPRIGHTS MQ504 MODEL WITH M8 THREADED HOLES
FOR ATT50+FIXBORK40 - SPACING1200 mm

Glass: 10.10.4 PVB Tempered
Accessories: MQ504-AISI316 + 2x ATT50 + 4x FIXBORK40 + 4x FIXGHIERA40

PARAPET HORIZONTAL STATIC LOAD STRENGTH ACCORDING TO INFRASTRUCTURE
D.M. OF 14/01/2008

CONCLUSIONS:
According to the test performed, based on the results obtained and according to what is indicated in Table 3.1.II of Infrastructure D.M. dated
14/01/2008, the sample in question, consisting of a parapet, limited to horizontal linear static load, complies with the requirements of Infrastructure
DM 14/01/2008.

Fu = unit load per metre

1190

Fu A B C D E F G

55 180 180 180 180 180 180 55
glass 10+10+1.52 PVB Tempered

1000 TOTAL LOAD 620
910 4,0kN

1090 Ø22

90 Ground level
150

i=1200
RESULTS OBTAINED FROM THE BREAKAGE OF A SINGLE TEMPERED STRATIFIED PANEL.

75

SYSTEMS FOR UPRIGHTS FOR ATT SERIES
BALUSTRADES

LOW SQUARE UPRIGHTS FOR ATT SERIES AISI 304 / AISI 316

Material: AISI 304/AISI 316 stainless steel
Features: 2 mm thick square pipe, supplied with square welded flange for floor anchoring and threaded inserts to fix the glass support accessories.
It does not require a flange cover.
Supplied with M16 threaded bar, nut and washer for floor anchoring. Support base, welded, 80 x 80 x 8 mm
Finish: satin-finished steel and polished steel

On request uprights made to measure. 2 2PACIORSPPOIEF DHIOFLOERSI 44CPOAPIRPSIEODFI HFOORLIESAA9T0°90°

830 620
A

150 B
8A

Ø20 Ø20

50

80 MQ504 MQ508

SPECIAL TIGHTENING SPANNER

Material: steel.
Features: tube spanner for tightening the nut on the M16 threaded
bar for anchoring the square uprights. This special tool has been
designed for positioning and tightening the upright locking nut,
with access from above to the threaded bar fixed to the floor with
a special resin. The magnetic head of the spanner retains the nut
and washer when applying to the thread.
The threaded bar must protrude from the floor by at least 30 mm.

The supplied cap has to be bonded at the end of the installation.

Art. Q.ty
MONCH16 1 Pc

Art. Dimensions A B Q.ty
MQ504-AISI304 50 x 50 x H 830 mm for ATT AISI 304 IN-LINE - 80 x 80 mm - M6 x 4
MQ508-AISI304 50 x 50 x H 830 mm for ATT AISI 304 A 90° - 80 x 80 mm - M6 x 8 26 mm M6 1 Pc
MQ504-AISI316 50 x 50 x H 830 mm for ATT AISI 316 IN-LINE - 80 x 80 mm - M8 x 4 26 mm M6 1 Pc
MQ508-AISI316 50 x 50 x H 830 mm for ATT AISI 316 A 90° - 80 x 80 mm - M8 x 8 27 mm M8 1 Pc
27 mm M8 1 Pc
76 >>> PRICE LIST REFERENCE PAGE 11 >>>

SINGLE-POINT FIXINGS - ATT SERIES - AISI 304 SYSTEMS FOR
BALUSTRADES
FLOOR TO WALL/GLASS SINGLE-POINT FIXING AISI 304

Material: cast AISI 304 stainless steel. Features: cast body for point fixing H 60 mm, 40 mm wide and 5 mm thick consisting of a Ø15 mm hole, on
the vertical part, for the use with glass clamping bosses and a horizontal slot for floor / wall anchoring. Anchoring via an M8 cheese-head screw with
hexagon socket to be applied to the horizontal slot, adjustable by ±3 mm along the direction perpendicular to the pane. Recommended connector
Art. FIXBORK1 and ring nut Art. FIXGHIERA8.
Finish: satin-finished steel or polished steel

5
60
Ø15

40

27 40
R20 16

8.5 5
±3
REGISTERED MODEL

Art. Dimensions Q.ty
1 Pc
ATT10 H 60 mm x 40 mm

SINGLE-POINT FIXING FOR ANCHORING TO FLAT PROFILE AISI 304

Material: cast AISI 304 stainless steel. Features: cast body for point fixing H 70 mm, 40 mm wide and 5 mm thick consisting of a Ø15 mm hole for
the use with glass clamping bosses and two holes for M6 countersunk head screws for securing the bracket to the flat profile. On request: possibility
to radiate the flat base for anchoring to a round profile.
Recommended connectorArt. FIXBORK1 and ring nut Art. FIXGHIERA8.
Finish: satin-finished steel or polished steel

5
40
70
2xØ6.5

Ø15
50
15 26
40

REGISTERED MODEL

Art. Dimensions Q.ty
1 Pc
ATT20 H 70 mm x 40 mm

TWO-POINT IN-LINE FIXING FOR ANCHORING TO FLAT PROFILE AISI 304

Material: cast AISI 304 stainless steel. Features: cast body for point fixing H 120 mm, 40 mm wide and 5 mm thick consisting of two Ø15 mm
holes for the use with glass clamping bosses and two holes for M6 countersunk head screws for securing the bracket to the flat profile. On request:
possibility to radiate the flat base for anchoring to a round profile.
Recommended connector Art. FIXBORK1 and ring nut Art. FIXGHIERA8.
Finish: satin-finished steel or polished steel

5 120
2xØ6.5

Ø15
80

15 26

REGISTERED MODEL 40

Art. Dimensions Q.ty
1 Pc
ATT15 H 120 mm x 40 mm x Interaxis 80 mm

>>> PRICE LIST REFERENCE PAGE 11 >>> 77

SYSTEMS FOR SINGLE-POINT FIXINGS - ATT SERIES - AISI 304
BALUSTRADES
FIXBORK Ø35 mm x M8
Ø35 Ø2.5
Material: AISI 304 steel 15.2
Features: boss for glass with a minimum thickness of 8 mm.
Supplied with an M8 x 30 mm grub screw. 5
Finish: CNC steel 7
Recommended tightening tool: Art. UT250

Ø2.5
28

DGORWAENLOL MM88x2x53m0mm m

Ø30
C

Ø2.5
22

Q.ty
1 Pc
1 Pc
FIXBORK1 FIXGHIERA8 1x45°
5

Art. Dimensions Recommended glass hole
FIXBORK1
FIXGHIERA8 Ø35 mm x M8 Ø17 / 18 mm

Ø35 mm x H 5 mm x C = M8

78 >>> PRICE LIST REFERENCE PAGE 11 >>>

SINGLE-POINT FIXINGS - ATT SERIES - AISI 316 SYSTEMS FOR
BALUSTRADES
FLOOR TO WALL/GLASS SINGLE-POINT FIXING AISI 316

Material: cast AISI 316 stainless steel. Features: cast body for point fixing H 80 mm, 50 mm wide and 8 mm thick consisting of a Ø20 mm hole,
on the vertical part, for the use with glass clamping bosses and a horizontal slot for floor/wall anchoring. Anchoring via an M10 cheese-head screw
with hexagon socket to be applied to the horizontal slot, adjustable by ±3.5 mm along the direction perpendicular to the pane. Recommended
connector Art. FIXBORK40 with ring nut Art. FIXGHIERA40, as well as Art. PVTB and Art. PVTS.
Finish: satin-finished steel or polished steel

8
80
Ø20

60

36 50
R25 23

11

REGISTERED MODEL 6
±3.5

Art. Dimensions Q.ty
1 Pc
ATT40 H 80 mm x 50 mm

SINGLE-POINT FIXING FOR ANCHORING TO FLAT PROFILE AISI 316

Material: cast AISI 316 stainless steel. Features: cast body for point fixing H 91 mm, 50 mm wide and 8 mm thick consisting of a Ø20 mm hole for
the use with glass clamping bosses and two holes for M8 countersunk head screws for securing the bracket to the flat profile. On request: possibility
to radiate the flat base for anchoring to a round profile. Recommended connector Art. FIXBORK40 with ring nut Art. FIXGHIERA40, as well as Art.
PVTB and Art. PVTS.
Finish: satin-finished steel or polished steel

8
55
91

2xØ9
Ø20

66

18 27
50
REGISTERED MODEL
Q.ty
Art. Dimensions 1 Pc

ATT50 H 91 mm x 50 mm

TWO-POINT IN-LINE FIXING FOR ANCHORING TO FLAT PROFILE AISI 316

Material: cast AISI 316 stainless steel. Features: cast body for point fixing H 160 mm, 50 mm wide and 8 mm thick consisting of two Ø20 mm

holes for the use with glass clamping bosses and two holes for M8 countersunk head screws for securing the bracket to the flat profile. On request:

possibility to radiate the flat base for anchoring to a round profile. Recommended connector Art. FIXBORK40 with ring nut Art. FIXGHIERA40, as well

as Art. PVTB and Art. PVTS.

Finish: satin-finished steel; or polished steel 8

160
2xØ9
Ø20

110

REGISTERED MODEL 18 27
50

Art. Dimensions Q.ty
1 Pc
ATT45 H 160 mm x 50 mm x Interaxis 110 mm

>>> PRICE LIST REFERENCE PAGE 11 >>> 79

SYSTEMS FOR SINGLE-POINT FIXINGS - ATT SERIES - AISI 316
BALUSTRADES

FIXBORK Ø40 mm x M10 AISI 316 Ø40 Ø2.5
15.5
Material: AISI 316 mechanically processed steel.
Features: boss for glass with a minimum thickness of 10 mm. 7 9.5
Supplied with an M10x45 mm grub screw for glass with thickness up to 8+8+1.52 mm.
Finish: CNC steel

Recommended tightening tool: Art. UT250

30 Ø2.5
DGORWAENLOL MM110x04x54m5mmm

Ø40
M10

8

FIXBORK40 FIXGHIERA40 Ø2.5 1.5x45°
30

Art. Dimensions Recommended glass hole Glass thickness Q.ty
FIXBORK40
FIXGHIERA40 Ø40 mm x M10 Ø22 mm 10/17.52 mm 1 Pc
1 Pc
Ø40 mm x H 8 mm x M10

STUDDED FIXING CONNECTOR AISI 316

Material: AISI 316 steel

Features: studded connector to clamp glass with a minimum thickness of 17.52 mm,

with M10 screw. Glass hole Ø18.

Finish: CNC steel

Recommended tightening tool: Art. UT300 Ø32

L
L

Ø3

Ø15
Ø27

Art. Dimensions Recommended glass hole Glass thickness Q.ty
PVTB Ø32 mm L = 18/24 Ø18 mm 17.52 / 21.52 mm 1 Pc

COUNTERSUNK FIXING CONNECTOR AISI 316

Material: AISI 316 steel

Features: countersunk connector to clamp glass with a minimum thickness of

17.52 mm, with M10 screw. Glass hole Ø26, countersink 3 mm deep

Finish: CNC steel

Recommended tightening tool: Art. UT300 Ø32
Ø15
Ø32

Ø3

L
L

10
1

3

Ø3 Ø3

Ø15 Ø15
Ø27 Ø27

Art. Dimensions Recommended glass hole Glass thickness Q.ty
PVTS Ø32 mm L = 18/24 Ø26 countersink 3 mm 17.52 / 21.52 mm 1 Pc

80 >>> PRICE LIST REFERENCE PAGE 11 >>>

CARRÉ SERIES CLAMPS FOR 6 TO 21.52 mm GLASS SYSTEMS FOR
BALUSTRADES
81

SYSTEMS FOR UPRIGHTS FOR CLAMPS
BALUSTRADES

LOW SQUARE UPRIGHTS FOR CLAMPS AISI 316

Material: AISI 316 stainless steel
Features: 2 mm thick square pipe, supplied with square welded flange for floor anchoring and threaded inserts to fix the glass support accessories.
It does not require a flange cover.
Supplied with M16 threaded bar, nut and washer for floor anchoring. Support base, welded, 80 x 80 x 8 mm
Finish: satin-finished steel and polished steel

On request uprights made to measure. 22HFOOLREIS 4 4HOFOLERSI AT9900° ° 44HFOOLRESI IINN LLIINNEEA

970
650

115 A Ø20 Ø20 Ø20
8 80
50

MQ702 MQ70490 MQ706LIN
MQ602 MQ60490 MQ606LIN

SPECIAL TIGHTENING SPANNER

Material: steel.
Features: tube spanner for tightening the nut on the M16 threaded
bar for anchoring the square uprights. This special tool has been
designed for positioning and tightening the upright locking nut,
with access from above to the threaded bar fixed to the floor with
a specila resin. The magnetic head of the spanner retains the nut
and washer when applying to the thread.
The threaded bar must protrude from the floor by at least 30 mm.

The supplied cap has to be bonded at the end of the installation.

Art. Q.ty
MONCH16 1 Pc

Art. Dimensions A Q.ty
M8 1 Pc
MQ602-AISI316 50 x 50 mm x 2 SINGLE AISI 316 - 80 x 80 mm M8 1 Pc
M8 1 Pc
MQ60490-AISI316 50 x 50 mm x 4 AT 90° AISI 316 - 80 x 80 mm M10 1 Pc
M10 1 Pc
MQ606LIN-AISI316 50 x 50 mm x 4 IN-LINE AISI 316 - 80 x 80 mm M10 1 Pc

MQ702-AISI316 50 x 50 mm x 2 SINGLE AISI 316 - 80 x 80 mm

MQ70490-AISI316 50 x 50 mm x 4 AT 90° AISI 316 - 80 x 80 mm

MQ706LIN-AISI316 50 x 50 mm x 4 IN-LINE AISI 316 - 80 x 80 mm

82 >>> PRICE LIST REFERENCE PAGE 12 >>>

CARRÉ SERIES CLAMPS SYSTEMS FOR
BALUSTRADES

CARRÉ SERIES CLAMP FOR 8+8/10+10 GLASS - AISI 316

Material: AISI 316 stainless steel

Features: clamp for high thickness suitable for flat supports, anchored to them with M10 screws on slotted hole 11 x 16.5 mm. Via an accessory

supplied in the pack the clamp can be closed. Supplied with safety pin and complete with gaskets for glass 17.52 / 21.52 mm.

Finish: polished steel or satin-finished steel - On demand: RAL finish 65

Removable pin 26.5 25.5

17.52/21.52 42.2 16.5

Ø10 M8 11
65 26

65 M5
35
55
Art. Dimensions Inside Distance from support 32 GFLOARSSOHVOELTERO PER
MGSR31 H 65 mm L 65 mm 17.52 / 21.52 mm 26 mm M8 FSOPRINSAOFTETTOY PDINI SICUREZZA
34
8/10/5+5/6+6Q.ty
Ø12 Ø121 Pc
15
CARRÉ SERIES CLAMP FOR Ø50 PIPES AND 8+8/10+10 GLASS - AISI 316

Material: AISI 316 stainless steel

Features: clamp for high thickness suitable for Ø50 mm pipe supports, anchored to them with M10 screws on slotted hole 11 x 16.5 mm. Via an

accessory supplied in the pack the clamp can be closed. Supplied with safety pin and complete with gaskets for glass 17.52 / 21.52 mm.

Finish: polished steel or satin-finished steel - On demand: RAL finish 74
65
Removable pin
26.5 25.5

R25

17.52/21.52 42.2 16.5

Ø10 M8 11
74 26

M5
65 35

Art. Dimensions Inside Distance from support GFLOASRSOHOVELETRO PER
MGSR33 26 mm M8 FOSPRINSAOFETTTYOPIDNI SICUREZZA
H 74 mm L 65 mm R 25 mm 17.52 / 21.52 mm
Q.ty
1 Pc

CARRÉ SERIES CLAMP FOR 8/10/5+5/6+6 GLASS - AISI 316

Material: AISI 316 stainless steel

Features: clamp suitable for flat supports, anchored to them with M8 screws on slotted hole 9.5 x 15 mm. Via an accessory supplied in the pack

the clamp can be closed. Supplied with safety pin and complete with gaskets for glass 8 / 10 / 11.52 / 13.52 mm.

Finish: polished steel or satin-finished steel - On demand: RAL finish 55 Removable pin

25 21

2 x M6 Ø8 9.5
18

M5 Ø10

FORO VETRO PER
SPINOTTO DI SICUREZZA

45.25
50

Art. Dimensions Inside Distance from support Q.ty
MGSR11 H 55 mm L 55 mm 8 / 10 / 11.52 / 13.52 mm 25 mm 1 Pc

>>> PRICE LIST REFERENCE PAGE 12 >>> 83

SYSTEMS FOR CARRÉ SERIES CLAMPS
BALUSTRADES

CARRÉ SERIES CLAMP FOR Ø42 PIPES AND 8/10/5+5/6+6 GLASS - AISI 316

Material: AISI 316 stainless steel

Features: clamp suitable for Ø42 mm pipe supports, anchored to them with M8 screws on slotted hole 9.5 x 15 mm. Via an accessory supplied in

the pack the clamp can be closed. Supplied with safety pin and complete with gaskets for glass 8 / 10 / 11.52 / 13.52 mm.

Finish: polished steel or satin-finished steel - On demand: RAL finish 62.4 Removable pin

25 21
55 32
34Ø42

2 x M6 8/10/5+5/6+6Ø89.5
1518

M5 Ø10
GLASS HOLE
Art. Dimensions Inside 45.25 FOR SAFETY PIN
MGSR13 H 62 mm L 55 mm R 21 8 / 10 / 11.52 / 13.52 mm 50
Q.ty
Distance from support 1 Pc
25 mm

CARRÉ SERIES CLAMP FOR 6/8/10 GLASS - AISI 316

Material: AISI 316 stainless steel

Features: clamp suitable for flat supports, anchored to them with M8 screws on slotted hole 9 x 11 mm. Via an accessory supplied in the pack the

clamp can be closed. Supplied with safety pin and complete with gaskets for glass 6 / 8 / 10 mm.

Finish: polished steel or satin-finished steel - On demand: RAL finish 45 Removable pin
17 20

45 2 x M6 Ø8 9
30
17
29 Ø10
6/8/10
11GLASS HOLE
M5 FOR SAFETY PIN

36
41.5

Art. Dimensions Inside Distance from support Q.ty
MGSR01 H 45 mm L 45 mm 6 / 8 / 10 mm 17 mm 1 Pc

CARRÉ SERIES CLAMP FOR Ø42 PIPES AND 6/8/10 GLASS - AISI 316

Material: AISI 316 stainless steel

Features: clamp suitable for Ø42 mm pipe supports, anchored to them with M8 screws on slotted hole 9 x 11 mm. Via an accessory supplied in

the pack the clamp can be closed. Supplied with safety pin and complete with gaskets for glass 6 / 8 / 10 mm.

Finish: polished steel or satin-finished steel - On demand: RAL finish 51.3
17 20
Removable pin

45 30 Ø42
29

6/8/10
11
2 x M6 Ø8 9

M5 17
Ø10
36
41.5 GLASS HOLE
FOR SAFETY PIN
Art. Dimensions Inside Distance from support
MGSR03 17 mm Q.ty
H 51 mm L 45 mm R 21 mm 6 / 8 / 10 mm 1 Pc

84 >>> PRICE LIST REFERENCE PAGE 12 >>>

BALLON SERIES CLAMPS FOR 8 TO 21.52 mm GLASS SYSTEMS FOR
BALUSTRADES
85

SYSTEMS FOR BALLON SERIES CLAMPS
BALUSTRADES

BALLON SERIES CLAMP FOR 8+8/10+10 GLASS - AISI 316

Material: AISI 316 stainless steel

Features: clamp for high thickness suitable for flat supports, anchored to them with M10 screws on slotted hole 11.5 x 16 mm.

Supplied with safety pin and complete with gaskets for glass 17.52 / 21.52 mm.

Finish: polished steel or satin-finished steel - On demand: RAL finish 70 Removable pin

26 26

43 17.52/21.52 16
M8
60 36 Ø10 11.5
70
26
M5

M8 GFOLARSOS HVOELTERO PER Ø12 Ø12
FSOPRINSOAFTETTOY PDINI SICUREZZA

Art. Dimensions For glass Distance from support Q.ty
MGS21 H 70 mm L 60 mm 17.52 / 21.52 mm 26 mm 1 Pc

BALLON SERIES CLAMP FOR Ø50 PIPES AND 8+8/10+10 GLASS - AISI 316

Material: AISI 316 stainless steel

Features: clamp for high thickness suitable for Ø50 mm pipe supports, anchored to them with M10 screws on slotted hole 11.5 x 16 mm.

Supplied with safety pin and complete with gaskets for glass 17.52 / 21.52 mm.

Finish: polished steel or satin-finished steel - On demand: RAL finish

82 Removable pin
70

26 26

R25 17.52/21.52 16
43

Ø10 11.5

82 26
M8

M5
60 36

M8 GFOLARSOS HVOELTERO PER
FSOPIRNSOAFTETTOY PDINI SICUREZZA

Art. Dimensions For glass Distance from support Q.ty
MGS23 26 mm 1 Pc
H 82 mm L 60 mm R 25 mm 17.52 / 21.52 mm

86 >>> PRICE LIST REFERENCE PAGE 13 >>>

BALLON SERIES CLAMPS SYSTEMS FOR
BALUSTRADES

CLOSED CLAMP FOR 6/6+6 GLASS - AISI 316 Removable pin

Material: AISI 316 steel

Features: clamp suitable for flat supports anchored to them with M8 screw and LEFT or RIGHT stop.

Complete with safety pin and gaskets for glass from 6 to 12.76 mm.

Finish: polished steel, satin-finished steel

26 29 29 26 26 Ø12

GLASS CUT OUT

Art. Dimensions For glass Q.ty
MS1250 H 63 mm L 45 mm 6/12.76 mmØ 12 1 Pc

CLAMP FOR 6/6+6 GLASS - AISI 316 Ø14 Removable pin

Material: AISI 316 steel

Features: clamp suitable for flat supports anchored to them with M8 screw.

Complete with safety pin and gaskets for glass from 6 to 12.76 mm.

Finish: polished steel, satin-finished steel

Ø14

GLASS CUT OUT

Art. Dimensions For glass Q.ty
1 Pc
MS1206 H 63 mm L 45 mm 6/12.76 mmØ 12

CLAMP FOR Ø42 PIPES AND 6/6+6 GLASS - AISI 316

Material: AISI 316 steel

Features: clamp suitable for radial supports on Ø42 pipe anchored to them with M8 screw.

Complete with safety pin and gaskets for glass from 6 to 12.76 mm.

Finish: polished steel, satin-finished steel

Removable pin

Ø14

29

GLASS CUT OUT

Art. Dimensions For glass Q.ty
MS1208 H 63 mm L 45 mm R 21.2 6/12.76 mm 1 Pc

>>> PRICE LIST REFERENCE PAGE 13 >>> 87

SYSTEMS FOR
BALUSTRADES
45 S
45 S
SINGLE-POINT FIXINGS WITH END PIECE - CIRCULAR SINGLE-POINT FIXINGS

4009 DOUBLE-POINT FIXING WITH END PIECE
FOR FLAT PROFILE CONNECTION - AISI 316

Material: AISI 316 steel.
Features: double bracket with Ø32 mm fixing connectors.
Finish: satin-finished steel

75 150
Ø32 Ø32

Ø25 Ø25

Art. Dimensions Recommended glass hole Q.ty
ATT4009 182 mm x 45 mm Ø32 mm Ø14 mm 1 Pc

4701 CIRCULAR SINGLE-POINT FIXING FOR FLAT OR Ø42.4 UPRIGHTS - AISI 316

Material: AISI 316 steel.

Features: Ø30 mm single fixing for both flat and Ø42.4 mm uprights

Finish: satin-finished steel

Art. Dimensions For glass Recommended glass hole Q.ty
ATT4701 Ø30 mm x 18 mm 6 / 12 mm Ø12 mm 1 Pc

88 >>> PRICE LIST REFERENCE PAGE 13 >>>

CIRCULAR SINGLE-POINT FIXINGS SYSTEMS FOR
BALUSTRADES
1403 CIRCULAR SINGLE-POINT FIXING - WITHOUT GLASS HOLES
FOR FLAT OR Ø42.4 UPRIGHTS - AISI 316

Material: AISI 316 steel. Features: single fixing without need to drill the glass. For both flat and Ø42.4 mm uprights
Finish: satin-finished steel

Art. Dimensions For glass Q.ty
ATT1403
ATT1403R42 Ø60 mm x 25 mm x 35 mm 6 / 10.76 mm 1 Pc
Ø60 mm x 25 mm for pipe Ø42.4 mm 6 / 10.76 mm 1 Pc

1401 CIRCULAR DOUBLE-POINT FIXING - WITHOUT GLASS HOLES
FOR FLAT OR Ø42.4 UPRIGHTS - AISI 316

Material: AISI 316 steel. Features: double fixing, without any need to drill the glass. For both flat and Ø42.4 mm uprights

Finish: satin-finished steel

Art. Dimensions For glass Q.ty
ATT1401
ATT1401R42 Ø60 mm x 25 mm x 35 mm 6 / 10.76 mm 1 Pc
Ø60 mm x 25 mm for pipe Ø42.4 mm 6 / 10.76 mm 1 Pc

>>> PRICE LIST REFERENCE PAGE 13 >>> 89

SYSTEMS FOR STRUCTURAL HANDRAIL
BALUSTRADES

PATENT PENDING

OXY STYLE - License n°758
GEAL - License n°740

STRUCTURAL HANDRAIL – CLASS 20 – Minimum anodizing thickness 20 micron
Suitable for outdoor installations, even in aggressive environments

90

STRUCTURAL HANDRAIL SYSTEMS FOR
BALUSTRADES

ROUND STRUCTURAL HANDRAIL KIT

Material: extruded aluminium (6060 T6)

Features: H B
kit L= 6000 mm consisting of: A
1 Pc continuous profile L=6000 mm Art. CORLM01/CORLM05 V
24 Pcs. adjustable pressers Art. CORLM33
6 m seal Art. CORLM41 12
12 m silicone glass-stop profile Art. UP4
LED
kit L= 3000 mm consisting of: strip
1 Pc continuous profile L=3000 mm Art. CORLM03/CORLM07
12 Pcs. adjustable pressers Art. CORLM33 4
3 m seal Art. CORLM41 4
6 m silicone glass-stop profile Art. UP4

Finishes: Brushed-steel-effect aluminium, matt aluminium, raw-finish aluminium
The Brushed-steel-effect is available only for profiles up to 3000mm.

LED OPTION:
The handrail can be fitted with high brightness LED strips to light the glass.
We recommend the use of an ultra-thin high brightness LED with a minimum value of IP65
(class 6 dust-proof resistance, class 5 water jet resistance)
Minimum LED thickness: 3 mm

Art. Dimensions Length L Shape For glass H Q.ty

CORLM1760C A=41 x B=43 6000 mm Round V = 17.52 mm 15 mm 1 Set
CORLM1730C A=41 x B=43 3000 mm Round 1 Set
CORLM2160C A=41 x B=47 6000 mm Round V = 17.5211m.5m 4 15 mm 1 Set
CORLM2130C A=41 x B=47 3000 mm Round V = 21.52 mm 15 mm 1 Set
15 8
V = 21.52 mm 15 mm

>>> PRICE LIST REFØE5RENCE PAGE 14 >>> 91

80

SYSTEMS FOR STRUCTURAL HANDRAIL
BALUSTRADES
SQUARE STRUCTURAL HANDRAIL KIT

Material: extruded aluminium (6060 T6)

Features: B B

kit L= 6000 mm consisting of: V

1 Pc continuous profile L=6000 mm Art. CORLM09/CORLM13 12

24 Pcs. adjustable pressers Art. CORLM33 H LED
A strip
6 m seal Art. CORLM41
H
12 m silicone glass-stop profile Art. UP4 A

kit L= 3000 mm consisting of: V

1 Pc continuous profile L=3000 mm Art. CORLM11/CORLM15
12 Pcs. adjustable pressers Art. CORLM33
3 m seal Art. CORLM41
6 m silicone glass-stop profile Art. UP4

Finishes: Brushed-steel-effect aluminium, matt aluminium, raw-finish aluminium
The Brushed-steel-effect is available only for profiles up to 3000mm.

LED OPTION: 4
The handrail can be fitted with high brightness LED strips to light the glass. 15 8
We recommend the use of an ultra-thin high brightness LED with a minimum value of IP65 50
(class 6 dust-proof resistance, class 5 water jet resistance)

Minimum LED thickness: 3 mm

Art. Dimensions Length L Shape Glass H Q.ty

CORLM1760S A=41 x B=43 6000 mm Square V = 17.52 mm 15 mm 1 Set
CORLM1730S A=41 x B=43 Square V = 17.52 mm 15 mm
CORLM2160S A=41 x B=47 11.5 4 3000 mm Square V = 21.52 mm 15 mm 4 1 SS1ee1tt.550
CORLM2130S A=41 x B=47 6000 mm Square V = 21.52 mm 15 mm 1
15 8
3000 mm 1 Set
4 Ø5

92 >>> PRICE LIST REFERENCE PAGE 14 >>> Ø5

80 4

STRUCTURAL HANDRAIL SYSTEMS FOR
BALUSTRADES
ROUND PROFILE

Material: extruded aluminium (6060 T6)
Features: rounded profile for structural handrail.
Finishes: Brushed-steel-effect aluminium, matt aluminium,
raw-finish aluminium
The Brushed-steel-effect is available only for profiles
up to 3000mm.

On demand (not available in stock)
RAL finishes

B

Art. Length A B Glass thickness AA Q.ty
41mm
CORLM01 6000mm 41mm 43mm 17,52mm 1 Pc
CORLM03 3000mm 41mm 43mm 1 Pc
CORLM05 6000mm 41mm 47mm 17,52mm B 1 Pc
CORLM07 B 3000mm 47mm 21,52mm 1 Pc
B
21,52mm

H SQUARE PROFILE
A
Material: extruded aluminium (6060 T6)

Features: rounded profile for structural handrail.

Finishes: Brushed-steel-effect aluminium, matt aluminium,

raw-finish aluminium
The Brushed-steel-effect is available only for profiles

up to 3000mm.

V On demand (not available in stock)
RAL finishes

B
B

15 8 A
50 A

16A B
A
Art. Length 41mm 43mm Glass thickness Q.ty
4 650000mm 41mm 43mm
CORLM09 41mm B 47mm 17,52mm 1 Pc
CORLM11 113.05 00mm 41mm 47mm 1 Pc
CORLM13 63Ø005 0000mmmm 17,52mm B 1 Pc
CORLM15 21,52mm 1 Pc
4
21,52mm

>>> PRICE LIST REFERENCE PAGE 14 >>> 93

V

SYSTEMS FOR STRUCTURAL HANDRAIL B B
BALUSTRADES B

ROUND PROFILE CLOSED CAP AA

Material: aluminium

Features: end cap for structural handrail

Finishes: Brushed-steel-effect aluminium, matt aluminium,

raw-finish aluminium
16
A AA

V

4 50 Art. Description A B Glass thickness Q.ty
11.5 CORLM17 Cap 41mm 43mm 17,52mm
21,52mm 1 Pc
15 8 Ø5 CORLM19 Cap 41mm 47mm 1 Pc
50 BB
SQUARE PROFILE CLOB SED CAP
M4 aterial: aluminium

Features: end cap for structural handrail

Finishes: Brushed-steel-effect aluminium, matt aluminium,

raw-finish aluminium AA

4 50 Art. Description A B Glass thickness Q.ty
11.5
CORLM21 Cap 41mm 43mm 17,52mm 1 Pc
Ø5 CORLM23 Cap 41mm 47mm 21,52mm 1 Pc

ROUND PROFILE OPBEN CAP

Material: aluminium

B Features: end cap for structural handrail

Finishes: Brushed-steel-effect aluminium, matt aluminium,

raw-finish aluminium
A 50 BB
H
164

A A A
A

Art. Description A B Glass thickness Q.ty
V CORLM25 17,52mm
Cap 41mm 43mm 21,52mm 1 Pc
CORLM27 Cap 41mm 47mm 1 Pc
B
SQUARE PROFILE OBPEN CAP
B
Material: aluminium
AA
Features: end cap for structural handrail

Finishes: Brushed-steel-effect aluminium, matt aluminium,

raw-finish aluminium
A
8 Art. B Glass thickness

A
Description A Q.ty

V CORLM29 Cap 41mm 43mm 17,52mm 1 Pc

4 50CORLM31 Cap 41mm 47mm 21,52mm 1 Pc

94 11.5
>>> PRICE LIST REFERENCE PAGE 15 >>>

Ø5

VV SYSTEMS FOR
BALUSTRADES
STRUCTURAL HANDRAIL B

4 PRESSER KIT 50 H
16
15 8 Material: POM nut 4 to tigh1t1e.n5 the structural handrail.
Features: screw A
pair
15 8
50 Ø5

80 Suggested tightening tool: Art. CORLM45

4

V

Art. Description Q.ty
CORLM33 Screw nut pair 1 Kit

BRACKET FOR CORNER JUNCTION 4 50
11.5
11.5 Mate4rial: AISI 316 Ø5
4
Features: bracket for 90° corner connection
15 8
4 15 8
50
Ø5

80

Art. Description Q.ty
CORLM35 Bracket for 90° corner connection 1 Kit

BRACKET FOR LINEAR JUNCTION 11.5 4

Material: AISI 316 4 15 8

Features: bracket for 180° corner connection

Ø5

80

Art. Description Q.ty
CORLM37 Bracket for 180° corner connection 1 Kit

WALL ANCHOR

Material: POM

Features: accessory for securing the structural handrail to the wall.

To be tightened on the handrail by Art. CORLM33.

Compatible with glass thickness 17.52mm and 21.52mm.

17.5 21.5

27 17.5
21.5 4

25 20

Ø9
21.5

17.5

17.52 21.52

8.8 Glass fixing 10.10 Glass fixing

Art. Description Q.ty
1 Pc
CORLM39 Accessory for securing the structural handrail to the wall

>>> PRICE LIST REFERENCE PAGE 15 >>> 95

SYSTEMS FOR STRUCTURAL HANDRAIL
BALUSTRADES
GLASS TIGHTENING GASKET

Gasket kit for structural handrail consisting of two different profiles,
which can be manually separated by tearing.

Art. Description Q.ty
1 mt
CORLM41 Gasket kit

TRANSPARENT GLASS STOP PROFILE

Material: universal PVC

Features: flexible glass-stop profile

Colour: transparent

Art. Dimensions Q.ty
UP4 1 mt
Thickness 4 mm

SELF-DRILLING SCREWS

Stainless Steel self-drilling screws: they drill and thread simultaneously.

Art. Description Q.ty
CORLM43 4 self-drilling screw 1 kit

PRESSER TIGHTENING WRENCH

Material: Steel
Features: shaped tool to tighten structural handrail pressers.

Art. Description Q.ty
1 Pc
CORLM45 Shaped tool to tighten structural handrail pressers

96 >>> PRICE LIST REFERENCE PAGE 15 >>>

SYSTEMS FOR
BALUSTRADES

HANDRAIL
97

SYSTEMS FOR SLOT HANDRAIL
BALUSTRADES

SLOT HAND RAIL AISI 316

Material: AISI 316 stainless steel

Features: shaped pipe to be used as a handrail, to be placed over the edge of the glass

Finish: brushed

Ø42.4

1.5 24

24

Art. Dimensions Q.ty
1 Pc
CORF50 Ø42.4 x L 3000 mm - Th. 1.5 mm

GASKET FOR GLASS EDGE

Material: rubber

Colour: black
Ø42.4

1.5 24
24

Art. For glass Q.ty
CORFGM175
CORFGM215 17.52 Per m.
21.52 Per m.

Ø42.4 IN-LINE JOINT FOR SLOT HANDRAIL AISI 316

Material: AISI 316 stainless steel

Finish: brushed

30 5 30

1.5 24
24
Ø42.4

Art. Dimensions Q.ty
1 Pc
CORF50357 Ø42.4 x 5 mm

90° JOINT FOR SLOT HANDRAIL AISI 316

3M0 ate5rial: 3A0ISI 316 stainless steel 30 40

Finish: brushed

61

Ø42.4 Ø42.4

Art. Dimensions Q.ty
1 Pc
CORF50359 Ø42.4 x L 61 mm

98 >>> PRICE LIST REFERENCE PAGE 16 >>>

SLOT HANDRAIL SYSTEMS FOR
BALUSTRADES
UPWARD ADJUSTABLE CONNECTOR AISI 316

Material: AISI 316 stainless steel
Features: upward connector with adjustable angle betwen 25° and 55° for slot handrail
Finish: brushed steel

B

B AA

AA B

Art. Dimensions B

CORF-UP25-55 A Ø42.4 - B 30 mm Q.ty
1 Pc

DOWNWARD ADJUSTABLE CONNECTOR AISI 316

Material: AISI 316 stainless steel

Features: downward connector with adjustable angle betwen 25° and 55° for slot handrail

Finish: brushed steel B

B

AA B
B

Art. Dimensions Q.ty
1 Pc
CORF-DOW25-55 A Ø42.4 - B 30 mm
30 5
END CAP FOR SLOTHAND RAIL AISI 316

Material: AISI 316 stainless steel

Fini3s0h: brushed40

61

Ø42.4
Ø42.4

Art. Dimensions Q.ty
1 Pc
CORF50364 Ø42.4 x L 5 mm

>>> PRICE LIST REFERENCE PAGE 16 >>> 99

SYSTEMS FOR
BALUSTRADES

B
76
Ø

B
75.5
PIPE HANDRAIL

A ROUND PIPE FOR HANDRAIL AISI 316

Material: AISI 316 stainless steel
Finish: brushed

Ø14 Ø14

Art. Dimensions A A Q.ty
1 Pc
CORFT42316 Ø42.4 x L 3000 mm

IN-LINE JOINT FOR PIPE HANDRAIL AISI 316

Material: AISI 316 stainless steel

Finish: brushed

AB

AB

Art. Dimensions AØ M5 Ø Q.ty
57.5 57.5 A 1 Pc
CORFGLT4101 Ø42.4 - A 5 - B 25 mm
Ø B B
ADJUSTABLE BEND FOR PIPE HANDRAIL AISI 316

Material: AISI 316 stainless steel A
Finish: brushed

Ø

Ø

Art. Dimensions Q.ty
1 Pc
CORFCR4140 Ø42.4 - A 65 - B 25 mm A

ADJUSTABLE JOINT FOR PIPE HANDRAIL AISI 316

72 Material: AISI 316 stainless steel 80 54
Features: adjustable angle joint

Finish: brushed steel Ø42.4

M10 Ø65
54
12 Ø14
Ø14

B Ø38

Ø42.4

Art. Dimensions Q.ty
72 1 Pc
CORF-52027 Ø42.4 S- A 42,4 - B 54 mm

A

100 >>> PRICE LIST REFERENCE PAGE 16/17 >>>

Ø14

PIPE HANDRAIL

WALL ANCHORING FOR PIPE HANDRAIL AISI 316

MateriaAl: AISI 316 stainless steel
Finish: brushed

AØ B
76 SYSTEMS FOR
Ø BALUSTRADES

75.
M5

B
Ø

A

Art. Dimensions Q.ty
1 Pc
CORFPP3110 Ø42.4 mm - A 85 mm - B 20 mm
CD
END CAP FOR PIPE HANDRAIL AISI 316 AB

Material: AISI 316 stainless steel
Finish: brushed

AB

AB

Ø Ø B
Ø Ø Ø

A

Art. Dimensions M10 Q.ty A
CORFTT4301 A Ø42.4 - B 38.3 - C 20 - D 4 mm 1 Pc 57.5

ARTICULATED GLASS CONNECTION 72
FOR PIPE HANDRAIL AISI 316
Ø14
Material: AISI 316 stainless steel
Finish: brushed

Ø 12

M5 Ø38
AB
Art. Pipe dimensions A Recommended glass hole Glass 57.5 S Q.ty
CORFAV44106 A = Ø42.4 mm 57.5 A 1 Pc
Ø15 mm 13.52 / 25.52 mm

ARTIC72ULATED WALL CONNECTION 80
FOR 8P0IPE HANDRAIL AISI 316
M5 57.5 A
BA Material: AISI 316 stainless steel
57.5
Finish: brushed

M10 Hole for M6 srew

12 Ø14
Ø14

Ø14
Ø38 Ø65
Ø65

Art. S Q.ty
CORFAM3075 1 Pc
Pipe dimensions
>>> PRICE LIST REFERENCE PAGE 17 >>> 101
A = Ø42.4 mm

13.5

SYSTEMS FOR FINISHING PROFILES
BALUSTRADES

FINISHING PROFILES 6+6 AISI 316 17.5

Material: AISI 316 steel 21.5
Features: finishing profile that protects the glass edge from impact 10
and prevents its delamination.
Use neutral silicones to fix onto the glass.
Finish: polished steel, brushed steel.

1

Minimum quantity required: 5 pieces also mixed.

10 1
13.5

17.5

Art. Length For glass Q.ty
CPR66 2500 mm 6+6+1,52 mm 1 Pz

FINISHING PROFILES 8+8 AISI 316 21.5
1
Material: AISI 316 steel
Features: finishing profile that protects the glass edge from impact
and prevents its delamination.
Use neutral silicones to fix onto the glass.
Finish: polished steel, brushed steel.

10

Minimum quantity required: 5 pieces also mixed.

17.5

Art. Length For glass Q.ty
CPR88 2500 mm 8+8+1,52 mm 1 Pz

FINISHING PROFILES 10+10 AISI 316 21.5

Material: AISI 316 steel 25.5
Features: finishing profile that protects the glass edge from impact
and prevents its delamination. 10 1
Use neutral silicones to fix onto the glass.
Finish: polished steel, brushed steel. 1
17.5
10

Minimum quantity required: 5 pieces also mixed.

21.5

Art. Length For glass Q.ty
CPR1010 2500 mm 10+10+1,52 mm 1 Pz

25.5

10 1
21.5

102 >>> PRICE LIST REFERENCE PAGE 17 >>> 25.5
1

POOL GLASS CLAMPS SYSTEMS FOR
BALUSTRADES

POOL Ø50 GLASS CLAMP - AISI 316

Material: AISI 316 steel
Features: glass clamp with Ø100 mm base and 4 x Ø9.8 holes for floor anchoring. Inside 20 mm. When tightening them, the 2 x M10 grub screws
will press on a steel plate that clamps the glass panel. The thickness of the plate plus the gaskets is 6 mm.
Complete with holes-cover.
Finish: polished steel or satin-finished steel

77 Ø10
Ø100
Ø105
50 A
13.5

150 51 99 2 x M10
25.5 75 50 A

SEZCITOIONNE AA--AA

Art. Dimensions For glass Q.ty
POOL50C Ø100/50 mm H 150 mm - distance from the floor 51 mm 11.5/13.5 mm 1 Pc

>>> PRICE LIST REFERENCE PAGE 18 >>> 103

SYSTEMS FOR GLASS CLAMPS
BALUSTRADES

MA402 TRAPEZIUM GLASS CLAMP FOR GLASS 15/21.5 - AISI 316 26.5

Material: AISI 316 stainles steel
Complete with gaskets and clamping screws. M8 anchoring screw NOT SUPPLIED.
Finish: polished steel or satin-finished steel

15/21.5

Ø8.5

Removable pin

75 Ø11.2
8.5M5

50

24 23.5 13
35
50 37.5
6.5
Ø16
R4.25

50 23.5
18
R5
R5
50
8.5

42

Art. Dimensions For glass Q.ty
MA402 H 75 mm x 50 mm 15 / 21.5 mm 1 Pc

MA502 TRIANGLE GLASS CLAMP FOR GLASS 15/21.5 - AISI 316

Material: AISI 316 stainles steel

Complete with gaskets and clamping screws.

M8 anchoring screw NOT SUPPLIED.

Finish: polished steel or satin-finished steel

Ø8.5 R28 M5 15/21.5
5.5

64 Removable pin
Ø11.2
8.5
13.5
24 23.5
38 37.5

81
6.5 R548
R4.25

34
20

81
8.5
R8.5 Ø16
R8.5
Art. Dimensions Q.ty
MA502 H 64 mm x 81 mm 46 1 Pc

For glass
15 / 21.5 mm

104 >>> PRICE LIST REFERENCE PAGE 18 >>>

GLASS CLAMPS SYSTEMS FOR
BALUSTRADES
BLOK90 - 90° GLASS CLAMP WITH OR WITHOUT GLASS HOLES
FOR 17.5/21.5 GLASS - AISI 316

Material: AISI 316 stainles steel
Features: clamp for joining 2 glasses without holes. An Ø8 mm pin can be inserted by drilling the glass panel, for safety’s sake.
Finish: polished steel or satin-finished steel

Ø16

43.3 50 30

52
M8

43.3 17.517.5/21.5

90° Ø10

Removable pin 33.5

Art. Dimensions For glass Q.ty
MBLK90 L 43.3 + 52 x 43.3 x H 50 mm 17.5/21.5 mm 1 Pc

BLOK180 - 180° GLASS CLAMP WITH OR WITHOUT GLASS HOLES
FOR 17.5/21.5 GLASS - AISI 316

Material: AISI 316 stainles steel
Features: clamp for joining 2 glasses without holes. An Ø8 mm pin can be inserted by drilling the glass panel, for safety’s sake.
Finish: polished steel or satin-finished steel

100 30
65 17.5/21.5 50

Ø16 33.5

12

Ø10

M8

Removable pin

Art. Dimensions For glass Q.ty
MBLK180 L 100 x H 50 mm 17.5/21.5 mm 1 Pc

>>> PRICE LIST REFERENCE PAGE 18 >>> 105