acc_cat_2018

Drilling 18
(Wood/Metal)

Safety Drilling 32
(Masonry)

Wear Eye Protection Wear Ear Protection Wear A Mask
Wear Protective Shoes
Fastening 46
Brick
Wear Protective Gloves Read The Instruction Manuals
Laminate
Remove Plug From Socket Plywood Drill and 53
Chipboard Screw Bit Sets
Materials Aluminum
Metal & Stainless Cutting 55

Stone Red Brick Wood And Plastic Combined Jigsaw / 64
Fiber Cement Board Reciprosawing
Reinforced Concrete Wood With Nails Wood And Metal
Porous Concrete Sandwich Panel Brushing 75
Sandwich Material
Wood Bonded Abrasive 77
Metal Plates
Wood Non-ferrous Metals Coated Abrasive 87
Laminate Cast Iron
Veneered Wood Multi Tool 98
Glass
Metal Plastic Diamond 106
Aerated Concrete Block
Metal Planing / 120
Sheet Metal Routering
Stainless Steel
OPE 126
Other Materials
Cleaning / 138
Glass Fibre Reinforced Plastic, Epoxy Vacuum System
Ceramic Tiles
Perspex Miscellaneous 156
Plaster Board

System Charts

Drilling / Fastening Fastening P.46 Impact Drilling Demolition P.18
P.18
Drill Screw bit Drilling (Wood/Metal)
Angle Drill Socket bit
Driver Drill Drill bit
Drilling (Wood/Metal)
Combination Step drill bit & Countersink bit
Drill bit Hammer Hole saw
(3 Mode)

Step drill bit & Countersink bit Diamond P.106
P.32
Hole saw Diamond core bit (Dry type)
P.106
Coated Abrasive P.87 Drilling (Masonry)

Hammer Flap wheel Tungsten carbide-tipped bit
Driver Drill
Hammer Drill Brushing P.75 Rotary Bull point
P.32 Hammer Cold chisel
Diamond Core Nylon brush & Wire brush P.106 (2 Mode) Grooving chisel
Hammer Drill P.46 Demolition Scaling chisel
Drywall Drilling (Masonry) P.18 Hammer Scraper assembly 100
Screwdriver Power (SDS-PLUS only)
Screwdriver Masonry bit with straight shank Scraper Clay spade
Impact Driver (Tungsten carbide-tipped bit) Bushing tool
4 Mode Electric Breaker Rammer
Impact Driver Diamond Ground rod adapter

Impact Diamond core bit Cutting (New Material, Masonry, Metal)
Wrench
(Dry type) (For Model 8406, 8406C) Diamond
Auto Feed
Screwdriver Fastening Diamond wheel
Power Mixer
Screw bit
Socket bit

Drilling (Wood/Metal)

Drill bit with 1/4"Hex shank

Cutter

Drilling (Masonry) P.32

Masonry Bit with 1/4"Hex shank

Angle Bonded Abrasive P.77
Cutter
Fastening P.46 Portable

Socket Extension bar Metal Cutter
Metal Cutting Saw
Universal joint Aluminum Cutting P.55
Bit adapter Groove Cutter
Screw bit assembly Carbide-tipped saw blade for Metal
Socket bit Portable Band Saw

Fastening P.46 Grooving TCT Saw Blade
P.156
Screw bit
Jigsaw / Reciprosawing P.64
Miscellaneous
Band saw blade
Drywall screw strip

Mixing blade

System Charts

Grinding Sanding Grinding Sanding

Bonded Abrasive P.77 Die Grinder Coated Abrasive P.87

Depressed center wheel Flexible grinding wheel Flap wheel

Bonded Abrasive P.77

Wheel point Tungsten carbide burrs

Bench Grinder Grinding wheel
Straight Grinder
Angle Grinder Coated Abrasive P.87 Multi Tool

Concrete Planer Flap Disc Multi-disc
Disc
Sander Multi Tool P.98
Polisher
Fiber sanding disc Multi Tool
Accessories
Brushing
P.75
Wire brush
Sawing
Cutting P.55
Slide Compound Miter Saw
Circular Saw Saw blade
Table Saw
Diamond P.106

Diamond wheels

Jigsaw / Reciprosawing P.64

Jig saw Jig saw blade

Reciprosaw Reciprosaw blade
Band saw
Coated Abrasive P.87 Band saw blade

Fiber sanding disc Wool pad Planing / Routering Planing / Routering P.120

Wool bonnet Planer Planer blade Mini planer blade
Sponge pad

Stone Polisher 100mm Diamond polishing pad Router Router bit
Belt Sander (Hook & loop type)
Finishing Sander Abrasive belt Pneumatic Tools
Abrasive paper
Miscellaneous P.156

Nails Staple

Random Orbit Sander Abrasive disc

Brushing P.75 Outdoor Power Equipment P.126

Wheel Brushcutter blades Chain blade
Shear blade
Wheel Sander

Nozzle

Nylon cutting head

























ACCESSORIES

Drilling (Wood/Metal)

118°chisel edge 135°split point HSS-R HSS-G
HSS-Co 5% M-force HSS-TiN For SDS-plus Hammers
Tungsten carbide tipped Use coolant. Do not drill with impact

18

Drilling (Wood / Metal)

HSS metal drill bit series

Range

Speed 7 5

200 M-force HSS-TiN

1 2 HSS-G 3 HSS6-TiN 8

HSS-R Double ended impact drill HSS-Co

100 Life

4 Rivet drill 8

Description 1 100 150 200 250 300 Specialized
Range HSS-Co5%
HSS-R 234567
Description
HSS-G Double ended Rivet drill HSS-TiN HSS-TiN impact M-force
drill

Made of

*Process of Roll forged Ground M-shape Split point 135°
manufacturing Chisel edge 118° Split point 135°
**
Tip geometry

TiN coating

Surface Rust resistant Long life Rust resistant
Shank Straight (Cylindrical)
Straight or 1/4”Hex Straight (Cylindrical) Straight or 1/4”Hex Straight (Cylindrical)

Straight or 1/4”Hex Better grip than
Cylindrical shank
Acceptable
Recommended

Material chart 1 2 345678

Wood

Material Plastic
Non-ferrous

metal***
Sheet steel

Cast iron

Alloy steel

Stainless steel

* Roll forged: Made by die-casted rolling machine. It is economical price. ** 135°split point: Ensure no walking and start fast, on contact. *** Non-ferrous metal (Such as Copper,
Ground: Drill bits ground from the block with excellent surface quality. M-shape: Designed to focus on drilling smoothly and speedily. Nickel and Zinc)

19

Drilling (Wood / Metal) HSS-G 5pcs,10pcs. metal drill bit set

HSS-R Metal Drill bit

These items are available on request. Contact us for the minimum order quantity.

Roll forged HSS drill bit Overall Per pkg. Part No. Bit diameter Overall Working Per pkg. Part No.
length (mm) (mm) length (mm) length (mm)
Bit diameter 1 D-46729 1.5 10 D-06236
(mm) 86 1 D-46947 1.75 40 18 10 D-06242
5.2 86 1 D-46953 2 46 22 10 D-06258
5.3 109 1 D-46969 2.25 49 24 10 D-06264
6.8 125 1 D-46975 2.5 53 27 10 D-06270
8.8 133 1 D-46981 2.75 57 30 10 D-06286
10.3 142 2.9 61 33 10 D-46648
10.8 3 61 33 10 D-06292
3.2 61 33 10 D-34942
HSS-G metal drill bit 3.25 65 36 10 D-06301
3.3 65 36 10 D-46567
Fully ground HSS drill bit 3.5 65 36 10 D-06317
3.75 70 39 10 D-06323
Bit diameter 338 Working Per pkg. Part No. 4 70 39 10 D-06339
(mm) length (mm) 4.2 75 43 10 D-17762
1.5 Overall 1 D-09656 4.25 75 43 10 D-06345
2 length (mm) 18 1 D-09662 4.5 75 43 10 D-06351
2.5 24 1 D-09678 4.75 80 47 10 D-06367
2.9 40 30 1 D-46816 5 80 47 10 D-06373
3 49 33 1 D-09684 5.2 86 52 10 D-34986
3.2 57 33 1 D-46589 5.25 86 52 10 D-06389
3.3 61 36 1 D-46595 5.3 86 52 10 D-46654
3.5 61 36 1 D-09690 5.5 86 52 10 D-06395
4 65 39 1 D-09709 5.75 93 57 10 D-06404
4.2 65 43 1 D-46604 6 93 57 10 D-06410
4.5 70 43 1 D-09715 6.25 93 57 10 D-06426
5 75 47 1 D-09721 6.5 101 63 10 D-06432
5.2 75 52 1 D-46610 6.75 101 63 10 D-06448
5.3 80 52 1 D-46822 6.8 109 69 10 D-46779
5.5 86 52 1 D-09737 7 109 69 10 D-06454
6 86 57 1 D-09743 7.25 109 69 10 D-06460
6.5 86 57 1 D-09759 7.5 109 69 10 D-06476
6.8 93 63 1 D-46838 7.75 109 69 10 D-06482
7 93 69 1 D-09765 8 117 75 10 D-06498
7.5 101 69 1 D-09771 8.25 117 75 5 D-06507
8 109 69 1 D-09787 8.5 117 75 5 D-06513
8.5 109 75 1 D-09793 8.75 117 75 5 D-06529
8.8 109 75 1 D-46844 8.8 125 81 5 D-46785
9 117 81 1 D-09802 9 125 81 5 D-06535
9.5 117 81 1 D-09818 9.25 125 81 5 D-06541
10 125 81 1 D-09824 9.5 125 81 5 D-06557
10.3 125 87 1 D-46850 9.75 125 81 5 D-06563
10.5 125 87 1 D-09830 10 133 87 5 D-06579
10.8 133 87 1 D-46866 10.25 133 87 5 D-06585
11 133 94 1 D-09846 10.3 133 87 5 D-46791
11.5 133 94 1 D-09852 10.5 133 87 5 D-06591
12 142 94 1 D-09868 10.8 133 87 5 D-46800
12.5 142 101 1 D-09874 11 142 94 5 D-06600
13 142 101 1 D-09880 11.5 142 94 5 D-06616
151 101 12 142 94 5 D-06622
151 12.5 151 101 5 D-06638
151 13 151 101 5 D-06644
151 101

20

Drilling (Wood / Metal) Rivet drill bit 1/4'' Hex. shank

Double ended drill bit Fully ground HSS drill bit

Bit diameter Overall Pc. per pkg. Part No. 1412C
(mm) length (mm)
2 10 B-26652 Type MZ Length Working Shank Per pkg. Part No.
2.5 38 10 B-33772 Bit (mm) length Type 5 B-39089
3 43 10 B-26668 (mm) MZ
3.1 46 10 B-26674 diameter 50
3.2 49 10 B-26680 (mm) 25
3.3 49 10 B-26696 3.3
3.5 49 10 B-26705
3.8 52 10 B-26711 M-Force HSS metal drill bit
4 55 10 B-26727
4.1 55 10 B-26733 Fully ground HSS drill bit
4.2 55 10 B-26749
4.3 55 10 B-26755 338
4.5 55 10 B-26761
4.8 58 10 B-26777 Bit diameter Overall Working Per pkg. Part No.
4.9 62 10 B-26783 (mm) length (mm) length (mm)
5 62 10 B-26799 2 1 D-29614
5.1 62 10 B-26808 2.5 49 24 1 D-29620
5.2 62 10 B-26814 3 57 30 1 D-29636
5.5 62 10 B-26820 3.2 61 33 1 D-37633
6 66 10 B-26836 3.3 65 36 1 D-46626
6.5 66 10 B-33788 3.5 65 36 1 D-29642
8 70 10 B-26842 4 70 39 1 D-29658
10 79 10 B-26858 4.2 75 43 1 D-37649
89 4.5 75 43 1 D-29664
5 80 47 1 D-29670
HSS-TiN metal drill bit with 1/4'' Hex. shank 5.2 86 52 1 D-37655
5.5 86 52 1 D-29686
Fully ground HSS drill bit 6 93 57 1 D-29692
6.5 93 57 1 D-29701
1412C 7 101 63 1 D-29717
7.5 109 69 1 D-29723
Type NZ Length Working Shank Per pkg. Part No. 8 109 69 1 D-29739
(mm) length Type 8.5 117 75 1 D-29745
Bit (mm) 1 D-46539 9 117 75 1 D-29751
diameter 78 NZ 1 D-31114 9.5 125 81 1 D-29767
81 30 NZ 1 D-31120 10 125 81 1 D-29773
(mm) 85 33 NZ 1 D-31136 10.5 133 87 1 D-29789
2.5 85 36 NZ 1 D-31142 11 133 87 1 D-29795
3 95 36 NZ 1 D-31158 11.5 142 94 1 D-29804
3.2 95 43 NZ 1 D-31164 12 142 94 1 D-29810
3.3 95 43 NZ 1 D-31170 12.5 151 101 1 D-29826
4 106 43 NZ 1 D-46545 13 151 101 1 D-29832
4.1 106 52 NZ 1 D-31186 151 101
4.2 113 52 NZ 1 D-31192
5 121 57 NZ 1 D-31201
5.2 117 63 NZ 1 D-31217
6 133 75 NZ 1 D-31223
6.5 151 87 NZ 1 D-31239
8 151 101 NZ
10 101
12
13

21

HSS Metal Drill Bit Assortment

HSS-Co metal drill bit (Cobalt 5%) Bit diameter Overall Working Per pkg. Part No.
(mm) length (mm) length (mm)
Fully ground HSS drill bit 6 5 D-16710
6.5 93 57 5 D-16726
338 1412C 7 101 63 5 D-16732
7.5 109 69 5 D-16748
Bit diameter Overall Working Per pkg. Part No. 8 109 69 5 D-16754
(mm) length (mm) length (mm) 8.5 117 75 5 D-16760
1.5 1 D-17289 9 117 75 5 D-16776
2 40 18 1 D-17295 9.5 125 81 5 D-16782
2.5 49 24 1 D-17304 10 125 81 5 D-16798
3 57 30 1 D-17310 10.5 133 87 5 D-16807
3.2 61 33 1 D-17326 11 133 87 5 D-16813
3.3 65 36 1 D-46660 11.5 142 94 5 D-16829
3.5 65 36 1 D-17332 12 142 94 5 D-16835
4 70 39 1 D-17348 12.5 151 101 5 D-16841
4.2 75 43 1 D-46676 13 151 101 5 D-16857
4.5 75 43 1 D-17354 151 101
5 80 47 1 D-17360
5.2 86 52 1 D-46682 HSS metal drill bit 5pcs. assortment
5.5 86 52 1 D-17376
6 93 57 1 D-17382 Fully ground HSS drill bit with bright edge and titanium coated ute nish
6.5 93 57 1 D-17398 4 x 75, 5 x 86, 6 x 93, 8 x 117, 10 x 133mm (1pc.each)
7 101 63 1 D-17407
7.5 109 69 1 D-17413 Part No.
8 109 69 1 D-17429 D-30514
8.5 117 75 1 D-17435
9 117 75 1 D-17441 M Force HSS metal drill assortment
9.5 125 81 1 D-17457 338
10 125 81 1 D-17463
10.5 133 87 1 D-17479 Per pkg. Set contents Part No.
11 133 87 1 D-17485
11.5 142 94 1 D-17491 5pc. Assortment 4 x 75, 5 x 86, 6 x 93, 8 x 117, 10 x D-30508
12 142 94 1 D-17500 19pc. Assortment 133mm 1pc. each) D-29876
12.5 151 101 1 D-17516 25pc. Assortment D-29882
13 151 101 1 D-17522 1pc each 1.0 to 10.0mm by 19ths
151 101 1pc each 1.0 to 13.0mm by 25ths

HSS-Co 5pcs. metal drill bit (Cobalt 5%)

HSS-Co metal drill bit assortment

Bit diameter Overall Working Per pkg. Part No. Per pkg. Set contents Part No.
(mm) length (mm) length (mm) 6pc. Assortment 2, 3, 4, 5, 6, 8mm (1pc.each) D-57168
1.5 5 D-16617
1.75 40 18 5 D-17625 HSS Metal Drill Bit 19 pcs set
2 46 22 5 D-16623
2.5 49 24 5 D-16639 1 each 1.0 to 10.0mm by 19ths
3 57 30 5 D-16645 Part No.
3.2 61 33 5 D-16651 D-29941
3.3 65 36 5 D-46632
3.5 65 36 5 D-16667
4 70 39 5 D-16673
4.2 75 43 5 D-34958
4.5 75 43 5 D-16689
5 80 47 5 D-16695
5.2 86 52 5 D-34992
5.5 86 52 5 D-16704
93 57

22

Drilling (Wood / Metal)

Step drill bit Range

Speed

200 3 4
Spiral ute Spiral ute
100 Bright nish TiN coating

1 2
Straight ute Straight ute
Bright nish TiN coating

100 250 Life
Material chart Acceptable
Recommended Cast iron
Material

Description Flute Surface Shank Plastic * Non-ferrous Sheet steel Alloy steel
1 Straight Bright nish metal
2 Straight
3 Spiral Three at or
4 Spiral Titanium coating 1/4”Hex

Bright nish

Titanium coating

*Non-ferrous metal (Such as Copper, Nickel and Zinc)

Countersink bit

Material chart Recommended Acceptable
Stainless
Material steel

Description Made of Type Shank Wood Plastic *Non-ferrous Cast iron Alloy steel
7cutting edge Alloy steel Shallow sinking metal
5cutting edge 1/4”Hex
3cutting edge
countersinking. Straight
3cutting edge High speed steel shank
1/4”Hex
Deep sinking (C-form)
Suitable for deep Straight
countersinking. shank

Slanting hole High speed steel Shallow Straight
sinking shank
Suitable for

It's for higher heat and abrasion resistance. Especially in thin
Suitable for drilling tough metal. (Cobalt content 5%) metal sheets.

*Non-ferrous metal (Such as Copper, Nickel and Zinc)

23

Drill Bits

Step and Cone Drill Bit

Cone drill bit Step drill bit Straight flute Titanium coating

These items are available on request. Contact us These items are available on request. Contact us for the minimum order quantity.
for the minimum order quantity.
1412C
1412C

Bit Overall Working Shank type Per pkg. Part No. Bit Overall Working Shank type Per pkg. Part No.
length (mm) length (mm) length (mm) length (mm) length (mm) length (mm)
Straight (Three at) 1 D-40048 1/4” Hex (MZ) 1 D-40113
3-14 58 38 Straight (Three at) 1 D-40054 4-12 65 45 1/4” Hex (MZ) 1 D-40129
Straight (Three at) 1 D-40135
4-20 71 51 4-20 75 53
4-32 102 80

Cone drill bit Step drill bit Spiral flute

These items are available on request. Contact us for the minimum order quantity. These items are available on request. Contact us for the minimum order quantity.

1412C 1412C

Bit Overall Working Shank type Per pkg. Part No.
length (mm) length (mm) length (mm)
Bit Overall Working Shank type Per pkg. Part No. 1/4” Hex (MZ) 1 D-40141
length (mm) length (mm) length (mm) 1/4” Hex (MZ) 1 D-40157
Straight (Three at) 1 D-40060 4-12 65 45 Straight (Three at) 1 D-40163
Straight (Three at) 1 D-40076
16-30.5 76 51 4-20 75 53
4-32 102 80
24-40 89 64

Step drill bit Straight flute Step drill bit Spiral flute Titanium coating

These items are available on request. Contact us for the minimum order quantity. These items are available on request. Contact us for the minimum order quantity.

1412C 1412C

Bit Overall Working Shank type Per pkg. Part No. Bit Overall Working Shank type Per pkg. Part No.
length (mm) length (mm) length (mm) length (mm) length (mm) length (mm)
1/4” Hex (MZ) 1 D-40082 1/4” Hex (MZ) 1 D-40179
4-12 65 45 1/4” Hex (MZ) 1 D-40098 4-12 65 45 1/4” Hex (MZ) 1 D-40185
Straight (Three at) 1 D-40107 Straight (Three at) 1 D-40191
4-20 75 53 4-20 75 53
4-32 102 80 4-32 102 80

24

Countersink bit series

Material chart Recommended Acceptable

Description A B C Material Stainless
7cutting edge Made of Type Shank steel
3cutting edge Wood Plastic Non-fer- Cast iron Alloy steel
5cutting edge Shallow 1/4”Hex rous metal*
3cutting edge sinking
Slanting hole Deep 1/4”Hex
sinking (C-form)
Shallow Straight
sinking
Deep shank
sinking Straight
Shallow shank
sinking Straight
shank

Non-ferrous metal (Such as Copper, Nickel and Zinc)

Countersink bit with seven 90º cutting edges Countersink bit with three 90º cutting edges

These items are available on request. Contact us for the minimum order quantity. These items are available on request. Contact us for the minimum order quantity.

(1/4" Hex. shank) Overall Per pkg. Application Part No. Bit Overall Per pkg. Application Part No.
Bit length (mm) 1 - D-37306 diameter (mm) length (mm)
1 M3 D-37437
diameter (mm) 50 6.3 45 1 M4 D-37443
13 8.3 50 1 M5 D-37459
10.4 50 1 M6 D-37465
Countersink bit with three 90º cutting edges 12.4 56 1 M8 D-37471
16.5 60 1 M10 D-37487
These items are available on request. Contact us for the minimum order quantity. 20.5 63 1 M12 D-37493
25 67

Slanting hole countersick bit

(1/4" Hex. shank) Overall Per pkg. Application Part No. Bit Overall Per pkg. Application Part No.
length (mm) diameter (mm) length (mm)
Bit 1 M3 D-37312 1 - D-37502
diameter (mm) 31 1 M4 D-37328 2-5 45 1 - D-37518
31 1 M5 D-37334 5-10 48 1 - D-37524
6.3 34 1 M6 D-37340 10-15 65 1 - D-37530
8.3 35 1 M8 D-37356 15-20 85
10.4 40 1 M10 D-37362
12.4 41
16.5
20.5

Countersink bit with five 90º cutting edges

These items are available on request. Contact us for the minimum order quantity.

Bit Overall Per pkg. Application Part No.
diameter (mm) length (mm)
1 M3 D-37378
6 48 1 M4 D-37384
8 48 1 M5 D-37390
10 40 1 M6 D-37409
12 40 1 M8 D-37415
16 42 1 M10 D-37421
20 45
25

Drilling (Wood / Metal)

Wood drill bit series

Description Point shank Diameter

Wood drill bit This is the most popular drill in wood drill Brad point Straight
and suitable for drilling holes with small to 1/4"Hex
medium diameter. Able to drill soft plastics 3 - 20mm
bit. 1/8" - 3/4"
3 - 15mm

Single spur auger bit Suitable for drilling of deep holes with Auger thread Hex
medium to large diameters holes in soft and 1/4"Hex
hard wood. Threaded screw point pull the bit 6 - 30mm
into the work piece providing a fast, easy to 1/4" - 1-1/4"
bit or wood drill.
6 - 21mm

Ship auger bit Suitable for knotty nail embedded wood Auger thread 5/16"& 7/16"Hex
which unable to drill with single spur. Suitable
for plumbing and electrical installation, etc.

10 - 38mm
3/8" - 1-1/2"

26

Drilling (Wood / Metal) Bit diameter Overall Working Part No.
(mm) length (mm) length (mm)
Wood drill bit 18 D-07294
20 200 130 D-07303
Bit diameter Overall Working Part No. 22 200 130 D-07319
(mm) length (mm) length (mm) 24 200 130 D-07325
3 D-07026 6 200 130 D-07331
4 60 33 D-07032 8 250 180 D-07347
5 75 43 D-07048 10 250 180 D-07353
6 85 52 D-07054 12 250 180 D-07369
7 95 57 D-07060 14 250 180 D-07375
8 110 69 D-07076 16 250 180 D-07381
9 115 75 D-07082 18 250 180 D-07397
10 125 81 D-07098 20 250 180 D-07406
12 135 87 D-07107 22 250 180 D-07412
13 155 101 D-53453 24 250 180 D-07428
14 151 96 D-07113 250 180
15 170 108 D-53469
16 160 100 D-07129 Ship Auger bit with 7/16''Hex. Shank
18 180 105 D-07135
20 200 120 D-07141 *5/16''Hex. Shank Overall Working Part No.
6 200 130 D-07157 Nail cutting type length (mm) length (mm)
8 315 160 D-07163 *D-36055
10 315 160 D-07179 Bit diameter 165 90 *D-36061
12 315 160 D-07185 (mm) 165 90 D-36077
14 315 160 D-07191 10 165 90 D-36083
16 315 160 D-07200 12 165 90 D-36099
18 315 160 D-07216 14 165 90 D-36108
20 335 160 D-07222 16 165 90 D-36114
335 160 18 165 90 D-36120
20 165 90 D-36136
Brad point wood drill bit with 1/4'' Hex. shank 22 165 90 D-36142
24 165 90 D-36158
Type NZ 26 165 90 D-36164
28 165 90 D-36170
Bit 30 165 90 D-36186
diameter 32 165 90
35
(mm) 38
3
4 Overall Working Shank Per pkg. Part No. Auger bit with 1/4'' Hex. shank
5 length length Type
6 (mm) (mm) 1 D-31245 Type NZ Overall Working Shank Per pkg. Part No.
8 NZ 1 D-31251 length length Type
10 78 33 NZ 1 D-31267 Bit (mm) (mm) 1 D-31326
12 92 43 NZ 1 D-31273 diameter NZ 1 D-31332
15 103 52 NZ 1 D-31289 200 130 NZ 1 D-31348
110 57 NZ 1 D-31295 (mm) 200 130 NZ 1 D-31354
117 75 NZ 1 D-31304 6 200 130 NZ 1 D-31360
133 87 NZ 1 D-31310 8 200 130 NZ 1 D-31376
151 101 NZ 10 200 130 NZ 1 D-31382
162 108 12 200 130 NZ 1 D-31398
14 200 130 NZ 1 D-31407
Single spur Auger bit with straight shank 16 200 130 NZ
18 200 130
Bit diameter Overall Working Part No. 20
(mm) length (mm) length (mm) 21
6 D-07238
8 200 130 D-07244
10 200 130 D-07250
12 200 130 D-07266
14 200 130 D-07272
16 200 130 D-07288
200 130

27

Drilling (Wood / Metal)

Holesaw

Ezychange BiM Holesaw BiM Holesaw BiM Holesaw for sheet metal

Variable pitch Variable pitch The stopper absorbs the Ejector spring
impact when hole saw goes
Ezychange adapter Standard adapter through materials

HSS Bi Metal with Co 8% HSS Bi Metal HSS Bi Metal
with Co 8%
Variable pitch

Multi purpose TCT Holesaw TCT Holesaw TCT grit Hole saw

Thanks to edged-less The many large grains
form, wood swarf is (#20 30) enable a
TCT ejected rapidly. TCT Prevent overplus cutting speedy and smooth
drilling.

Standard Adapter

Material chart Recommended Acceptable
Application
Steel Inox Alumi- Non Wood MDF PLASTER PVC FRP SOFT Brick Lime Marble
Ezy BiM Stainless num ferrous BOARD TILE stone
Metal

BiM

BiM for sheet metal

Multi purpose TCT

TCT
TC grit

Vacuum brazed Diamond

28

Drilling (Wood / Metal)

Ezychange BiM Holesaw Hole Saw

Tool-less change of pilot drill and holesaw (dia.14-152mm) in the Ezychange adaptor. (1/4” Hex Shank)

Recommended for cutting steal plates, aluminum, wood and plasticup to 1.6mm in thickness.

Type NZ Working Part No. Size Working Part No. For Model Hole Saw dia. Part No.
length (mm) length Impact Drivers
Size (mm) B-11265 (mm) B-31756 12mm A-31968
(mm) B-31706 56 B-11411 Driver Drills 13mm A-31974
40 B-11271 57 40 B-11427 Drills 14mm A-31980
16 40 B-11287 60 40 B-11433 15mm A-31996
17 40 B-11293 64 40 B-16760 16mm A-32007
19 40 B-11302 65 40 B-11449 17mm A-32116
20 40 B-11318 68 40 B-11455 18mm A-32122
22 40 B-31712 70 40 B-31762 19mm A-32138
24 40 B-11324 73 40 B-11461 20mm A-32144
25 40 B-11330 76 40 B-31778 21mm A-32150
27 40 B-11346 79 40 B-11477 22mm A-32166
29 40 B-11352 83 40 B-31784 23mm A-32172
30 40 B-31728 86 40 B-11483 24mm A-32188
32 40 B-11368 92 40 B-31790 25mm A-32194
35 40 B-16754 95 40 B-11499 26mm A-32203
37 40 B-11374 102 40 B-11508 27mm A-32219
38 40 B-11380 105 40 B-31809 28mm A-32225
40 40 B-31734 111 40 B-31815 29mm A-32231
41 40 B-11396 114 40 B-31821 30mm A-32247
44 40 B-11405 121 40 B-11514 31mm A-32253
46 40 B-31740 127 40 B-31837 32mm A-32269
48 40 B-18194 140 40 B-11520 33mm A-32275
51 40 152 40 34mm A-32281
52 40 40 35mm A-32297
54 36mm A-32306
37mm A-32312
38mm A-32328

or Ezychange BiM Holesaw

Pilot drill

Adapter

Description Part No.
B-11536
Ezychange Adapter + HSS-G Pilot Drill Bit B-11542
HSS-G Pilot Drill Bit B-16271
B-31902
Ezychange Transition Adapter
for 14-30mm x 3, for 32-152mm x 3
Ezychange SDS plus Adapter without Pilot Drill

29

Drilling (Wood / Metal) BiM Hole saw

Ezychange BiM Holesaw assortment Hole saws have 4/6 variable pitch tooth design and are recommended for cutting,

steel plates, aluminium, copper, brass, wood and plastic.

Working length: 38mm

Description Part No. Size Working Part No. Size Working Part No.
B-11966 (mm) length (mm) length
Ezychange Adapter + HSS-G Pilot Drill Bit B-11972 (mm) D-35368 (mm) D-17099
HSS-G pilot drill bit B-11988 14 D-16994 57 D-35499
B-18188 16 38 D-35374 59 38 D-25688
16,20,25,32,40,51mm, Ezychange adapter, 17 38 D-17005 60 38 D-30140
HSS-G pilot drill bit 19 38 D-17251 64 38 D-24882
20 38 D-35380 65 38 D-35508
20,25,32,40,51,65mm, Ezychange adapter, 21 38 D-17011 67 38 D-17108
HSS-G pilot drill bit 22 38 D-17027 68 38 D-25694
24 38 D-17033 70 38 D-35514
25,32,40,51,65,68,76mm, Ezychange adapter, 25 38 D-35396 73 38 D-17114
HSS-G pilot drill bit x2 27 38 D-17267 76 38 D-35520
29 38 D-35405 79 38 D-33869
TCT Hole saw & Center drill 30 38 D-17049 80 38 D-17120
32 38 D-35411 83 38 D-35536
High quality carbide tips brazed on to the cutting edge enable high speed drilling 33 38 D-17055 86 38 D-35542
of material up to 4mm in thickness with no coolant required. 35 38 D-35427 89 38 D-17136
Carbide tips are random-spaced to reduce chattering noise. 37 38 D-17061 92 38 D-35558
Not for percussion / hammering applications. 38 38 D-17273 95 38 D-35564
40 38 D-35433 98 38 D-35570
Hole saw Shank Part No. Bit Shank Part No. 41 38 D-35449 102 38 D-17142
dia diameter dia 43 38 D-17077 105 38 D-35586
Bit (mm) B-00898 (mm) B-01046 44 38 D-35455 108 38 D-35592
diameter 6 B-00907 (mm) 10 B-01052 46 38 D-35461 111 38 D-35601
6 B-00913 50 10 B-01068 48 38 D-17083 114 38 D-35617
(mm) 6 B-00929 55 13 B-01074 51 38 D-35477 121 38 D-17158
16 6 B-00935 60 13 B-02652 52 38 D-24876 127 38 D-35623
18 6 B-00941 65 13 B-01080 54 38 D-35483 140 38 D-17164
20 10 B-00957 68 13 B-01096 56 38 152 38
21 10 B-00963 70 13 B-01105 38 38
22 10 B-00979 75 13 B-01111
25 10 B-00985 80 13 B-01127 Accessories for BiM Hole saw
27 10 B-00991 85 13 B-01133
28 10 B-01002 90 13 B-01149 Pilot drill
30 10 B-01018 95 13 B-01155
32 10 B-01024 100 13 B-01161 Adapter
35 10 B-01030 110 13
38 10 120
40
45
48

Center drill Bit diameter (mm) Part No. Application Fits hole saws Part No.

Application 16-55 B-01177 Adapter with Pilot drill 14 -29mm D-17170
60-120 B-01183 For 10mm Drill 32 -152mm D-17186
steel, etc. 16-55 B-01199 For 13mm Drill 14 -29mm D-17603
steel etc. 60-120 B-01208 For SDS-Plus Hammer 32 -76mm D-17619
FRP, resin, etc For SDS-Plus Hammer
FRP, resin, etc Pilot drill All D-17192
Length 71mm

30

Drilling (Wood / Metal)

Accessories for BiM Hole saw Accessories for vacuum brazed diamond Holesaw

Pilot drill Accessories for Vacuum brazed diamond holesaw

Shank with Pilot Drill

Application Fits hole saws Part No.
Length 71mm All D-17192

SDS-Plus with Pilot Drill

BiM Hole saw assortment Pilot Drill

Most six common sizes for Plumber & Electrician. Application Type of Fits Part No.
A: 11mm (*7/16'') Adapter Shank with Pilot Drill pilot drill hole saws
with Pilot Drill
for 13mm drill TCT All B-46115
B: 9.5mm (*3/8'')
Adapter with Pilot Drill SDS-PLUS
Pilot Drill
C: Ejector spring SDS-PLUS / 13mm drill

TCT All B-52691

Suitable for Included Hole saws (1 each) Part No. TCT All B-46121
For Plumber D-47117
For Electrician 19,22,29,38,44,57mm,adapter A, D-47123
For Electrician adapter B, ejecter spring D-47139

16,20,25,32,40,51mm,adapter A,
adapter B, ejecter spring

20,25,32,40,51,65mm,adapter A,
adapter B, ejecter spring

Vacuum brazed diamond Holesaw

Use with shank with Pilot Drill

Bit Working Part No. Bit Working Part No.
diameter length diameter length
(mm) B-45995 (mm) B-46056
(mm) B-46006 (mm) B-46062
16 40 B-46012 38 40 B-46078
19 40 B-46028 45 40 B-46084
B-46034 50 40 B-46090
25 40 B-46040 53 40 B-46109
30 40 57 40
32 40 64 40

35 40

31

ACCESSORIES

Drilling (Masonry)

For SDS-PLUS Hammers For SDS-MAX Hammers 17 mm Hex 19 mm Hex
21mm Hex 28.6mm Hex 30mm Hex Makita Small

32

Drilling (Masonry) TCT drill bit 1/4'' Hex. shank

Straight shank

Straight shank Tungsten carbide-tipped bit
(Masonry drill bit)

1/4''Hex (NZ)

Bit diameter Overall Working Shank type Per pkg. Part No.
(mm) length (mm) length (mm)
*(Masonry Drill Bit 5pc Assortment) 5 di erent sizes. NZ 1 D-31463
NZ 1 D-31479
Bit diameter (mm) Length (mm) Part No. 3 80 35 NZ 1 D-31485
NZ 1 D-31491
3 60 D-05228 4 80 35 NZ 1 D-31500
4 70 D-05234 5 90 45
5 85 D-05240 6 100 55
6 100 D-05256
6 150 D-05262 8 100 55
7 100 D-05278
7 150 D-05284 Omnibohrer Straight shank
8 110 D-05290
8 150 D-05309 (Multi purpose drill bit)
9 150 D-05315
10 150 D-05321 Can drill multiplicity of materials without changing drill bit (ideal for doors, shelves,
10 400 D-18960 window frames etc). Use with rotary or percussion drills. Without percussion use on
11 150 D-05337 vitri ed brick, wood, brik. With percussion use on , block, stone, plaster most grades
12 150 D-05343 of concrete.
12 400 D-17697
12 600 D-17728 Bit diameter (mm) Length (mm) Part No.
13 150 D-05359
14 150 D-05365 3 60 D-30287
14 400 D-18976 4 70 D-30293
15 150 D-05371 5 85 D-30302
16 150 D-05387 5.5 85 D-31027
16 400 D-17706 5.5 100 D-31033
16 600 D-17734 5.5 150 D-31049
18 400 D-18982 6 100 D-30318
20 400 D-17712 6 150 D-30324
20 600 D-17740 6.5 85 D-31055
6.5 100 D-31061
TCT drill bit Straight shank 5pcs set 6.5 150 D-31077
7 100 D-30330
*5 di erent sizes 7 150 D-30346
8 110 D-30352
Bit diameter Overall Working Part No. 8 150 D-30368
(mm) length (mm) length (mm) 9 150 D-30374
4 D-05175 10 150 D-30380
5 70 35 10 400 D-30396
6, 8, 10 85 45 D-16508 11 150 D-30405
7 100 60 D-16514 12 150 D-30411
8 100 55 *D-20719 12 400 D-30427
110 60 12 600 D-30433
5, 6, 7, 8, 10 110 60 13 150 D-30449
14 150 D-30455
14 400 D-30461

33

Drilling (Masonry) Masonry drill bit for brick

Omnibohrer straight shank 5pcs set

Bit diameter Length (mm) Working Part No. Bit diameter Overall Pc. per pkg. Part No.
(mm) length (mm) D-30477 (mm) length (mm)
5 85 3.5 1 D-40733
6 100 41 D-36712 4.5 75 1 D-40755
8 110 56 5 85 1 D-40761
10 150 55 5.5 85 1 D-40783
12 150 95 5.5 85 1 D-40799
4 70 91 6 150 1 D-40836
5 85 36 6.5 400 1 D-40842
6 100 41 6.5 100 1 D-40858
8 150 56 6.5 150 1 D-40864
10 150 95 7 400 1 D-40892
95 8 400 1 D-40939
10 400 1 D-40967
10 150 1 D-40973
10 200 1 D-40989
12 400 1 D-41012
12 200 1 D-41028
400

Glass bit Straight shank

Masonry drill bit for brick assortment

Bit diameter Overall Shank Per pkg. Part No. Bit diameter (mm) Overall Length (mm) Part No.
(mm) length (mm) Type D-41034
3 Straight 1 D-25111 5 85 D-41040
4 65 Straight 1 D-25127 6 100
5 65 Straight 1 D-25133 8 12 D-41791
6 65 Straight 1 D-25149 4 75
8 65 Straight 1 D-25155 5 85
10 70 Straight 1 D-25161 6 100
12 80 Straight 1 D-25177 8 120
80 10 120
3 60
Glass bit 1/4'' Hex. Shank 4 75
5 85
1/4''Hex (NZ) Overall Shank Per pkg. Part No. 6 100
length (mm) Type 7 100
Bit diameter 1 D-31413 8 120
(mm) 65 NZ 1 D-31429 9 120
4 65 NZ 1 D-31435 10 120
5 65 NZ 1 D-31441
6 70 NZ 1 D-31457
8 80 NZ
10

34

Drilling (Masonry)

TCT drill bit for SDS-PLUS Hammers Chart

Product Standard type Centering Tip Centering Tip V-PLUS NEMESIS ll
Range
Carbide

Tip 2 Cutter Centering tip 2 Cutter Centering tip 2 Cutter 4 Cutter
Standard 2 ute High Durability 2 ute High Durability 4 ute
Flute Standard 2 ute

Chart E A BE A BE A BE A B

A - Speed 5 5 5 5
B - Life 4 4 4 4
C - Easy positioning 3 3 3 3
D - Accuracy 2 2 2 2
E - Anti Jamming in rebar 1 1 1 1

D CD CD CD C

ALL Life (Drilling into reinforced concrete)
NEW!!
%
NEMESIS ll for SDS-PLUS Hammers
With Solid Carbide head 150 50%
UP 150
Lifetime on rebar up to 50% higher!
100
Utility
100

50

0 NEMESIS ll
Current

Wearing mark Rebar chamfer
Indicator for evaluating the dimensional
stability of the anchor holes Reduce shock
Innovated ute geometry in reinforcement strikes
Faster drilling

35

Drilling (Masonry) Bit diameter Overall Working Part No.
(mm) length (mm) length (mm)
Tools for SDS-PLUS Hammers 14 B-58475
14 450 400 B-58481
nemesis II drill bit for SDS-PLUS Hammers 14 600 550 B-58497
15 1000 950 B-58506
*One piece solid carbide tip (5-10mm) 15 160 110 B-58512
*No seizing up on hitting reinforcing steel 15 210 160 B-58528
*Ensure precision drill holes 15 260 210 B-58534
*Drills more precisely 16 450 400 B-58540
*Low vibration and high fracture resistance 16 160 110 B-58556
16 210 160 B-58562
Bit diameter Overall Working Part No. 16 260 210 B-58578
(mm) length (mm) length (mm) 16 310 260 B-58584
5 B-57897 16 450 400 B-58590
5 115 50 B-57906 16 600 550 B-58609
5.5 165 100 B-57940 18 1000 950 B-58615
5.5 115 50 B-57956 18 250 200 B-58621
6 165 100 B-57962 20 450 400 B-58637
6 115 50 B-57978 20 250 200 B-58659
6 165 100 B-57984 22 450 400 B-58665
6 215 150 B-57990 22 250 200 B-58687
6 265 200 B-58001 24 450 400 B-58693
6.5 315 250 B-58023 24 250 200 B-58702
6.5 165 100 B-58039 25 450 400 B-58718
6.5 215 150 B-58045 25 250 200 B-58724
6.5 265 200 B-58051 28 450 400 B-58746
7 315 250 B-58067 28 250 200 B-58752
7 115 50 B-58073 30 450 400 B-58768
8 165 100 B-58095 30 250 200 B-58774
8 115 50 B-58104 32 450 400 B-58780
8 165 100 B-58110 450 400
8 215 150 B-58126
8 265 200 B-58132 Centering Tip drill bit for SDS-PLUS Hammers
9 315 250 B-58176
10 165 100 B-58198 Bit diameter Overall Working Part No.
10 115 50 B-58207 (mm) length (mm) length (mm)
10 165 100 B-58213 4 B-55859
10 215 150 B-58229 5 110 50 B-54128
10 265 200 B-58235 5 110 50 B-54134
10 315 250 B-58257 5.5 160 100 B-55865
10 455 390 B-58263 5.5 110 50 B-55871
10 600 540 B-58279 6 160 100 B-54140
12 1000 940 B-58322 6 110 50 B-54156
12 160 110 B-58338 6 160 100 B-54162
12 210 160 B-58344 6.5 210 150 B-55887
12 260 210 B-58350 6.5 110 50 B-55893
12 310 260 B-58366 7 160 100 B-55924
12 450 400 B-58372 7 110 50 B-55930
12 600 550 B-58388 8 160 100 B-54178
14 1000 950 B-58431 8 110 50 B-54184
14 160 110 B-58447 8 160 100 B-55952
14 210 160 B-58453 8 210 150 B-55968
14 260 210 B-58469 9 260 200 B-55974
310 260 10 160 100 B-55980
10 110 50 B-54190
160 100

36

Drilling (Masonry)

Bit diameter Overall Working Part No. Bit diameter (mm) Length (mm) Part No.
(mm) length (mm) length (mm) 12
10 B-54209 12.5 460 D-16271
10 210 150 B-55996 12.7 160 D-14102
10 260 200 B-56007 12.7 160 D-03280
12 310 250 B-54215 13 350 D-03296
12 160 100 B-54221 13 160 D-00256
12 210 150 B-56029 13 260 D-25622
12 260 200 B-56035 14 350 D-16128
13 350 290 B-56057 14 160 D-00262
14 160 100 B-56063 14 210 D-21331
14 160 100 B-56085 14 260 D-00278
14 260 200 B-56091 14 350 D-16134
16 350 290 B-56116 14.3 460 D-17544
16 160 100 B-56122 15 160 D-03997
16 210 150 B-56138 15 160 D-00284
16 310 250 B-56144 15 350 D-16140
16 350 290 B-56150 16 460 D-17550
17 460 400 B-56465 16 160 D-03981
210 150 16 210 D-00290
16 260 D-16156
Tungsten carbide-tipped bit 16 310 D-00309
16 350 D-16162
Bit diameter (mm) Length (mm) Part No. 17 460 D-16287
17 160 D-16178
3.5 90 D-16950 17 210 D-00315
3.5 110 D-15665 17 260 D-16184
4 110 D-00016 17.5 350 D-16190
5 110 D-00022 18 160 D-03305
5 160 D-00038 18 160 D-16209
5.5 110 D-00044 18 210 D-00321
5.5 160 D-16106 18 260 D-16215
5.8 110 D-03268 18 300 D-00337
6 110 D-00050 18 350 D-16221
6 160 D-00066 19 460 D-17566
6 210 D-00072 19 210 D-00343
6.5 110 D-00088 19 350 D-16243
6.5 160 D-00094 20 460 D-16293
6.5 210 D-45082 20 210 D-00359
7 110 D-00103 20 260 D-16259
7 160 D-00119 20 310 D-00365
8 110 D-00125 20 350 D-16265
8 160 D-00131 22 460 D-15235
8 210 D-00147 22 260 D-00371
8 260 D-00153 22 310 D-08062
9 110 D-08040 24 460 D-15241
9 160 D-08056 25 460 D-16302
9 210 D-00169 25 260 D-00387
9.5 210 D-03274 25 310 D-08517
10 110 D-09117 25 350 D-03311
10 160 D-00175 26 460 D-15257
10 210 D-00181 26 260 D-00393
10 260 D-00197 26 310 D-08078
10 310 D-00206 28 460 D-15263
10 460 D-17538 30 460 D-16318
11 160 D-00212 460 D-17572
12 160 D-00228 37
12 210 D-00234
12 260 D-00240
12 350 D-16112

Drilling (Masonry) Tools for SDS-MAX Hammers

TCT drill bit for SDS-PLUS Hammers 5pcs set

(5 di erent sizes)

* (6 x 160 2pc. 8 x 160 2pc.)
** (6 x 160 2pc.)

Bit diameter Overall Working Part No. nemesis MAX drill bit for SDS-MAX Hammers
(mm) length (mm) length (mm) D-00795
5, 6, 8 *Massive carbide tip provicles optimal drilling performance
6, 8 110 50 D-03888 *No seizing up on hitting reinforcing steel
5.5, 7 160 100 D-17784 *Ensure precision drill holes
6, 7, 8 110 50 D-20703 *Drills more precisely
6, 6.5 160 100 *Low vibration and high fracture resistance
110 50
8, 10, 12 160 100
5, 6, 7, 8, 10 160 100

TCT drill bit & Chisel for SDS-PLUS Hammers 6pcs set

Bit diameter Overall Working Part No. Bit diameter Overall Working Type Part No.
(mm) length (mm) length (mm) D-58920 (mm) length (mm) length (mm)
5, 6, 8 16 4 cutter head B-19978
160 100 18 540 400 4 cutter head B-20002
Bull Point 250 20 540 400 4 cutter head B-20030
Cold Chisel 20x250 22 520 400 4 cutter head B-20068
Scaling Chisel 40x250 25 520 400 4 cutter head B-20111
30 520 400 4 cutter head B-20183
30 370 250 4 cutter head B-20199
32 570 450 4 cutter head B-20214
40 570 450 4 cutter head B-20301
570 450

TCT drill bit & Chisel for SDS-PLUS Hammers set
(with aluminum case)

10pc. assortment Part No.
D-19174
Description
6 x110, 8x160, 10, 12x210, 10, 12, 16, 20x460, Part No.
D-19180
Bull Point 250
Cold Chisel 20x250

17pc. assortment

Description
5, 6, 8, 10x110, 6, 8, 10,12x160, 8, 10x210, 12, 14x260

Bull Point 140, 250
Cold Chisel 20x140, 20x250

Scaling Chisel 40x250

38

Drilling (Masonry) TCT drill bit for mining
(for SDS-MAX Hammers)
Tools for SDS-MAX Hammers
*Suitable for drillling into hard rock
For Model: HR3540C, HR3541FC, HR4001C, HR4002, HR4010C *Resharpenable
HR4011C, HR4501C, HR4510C, HR4511C, HR5201C, HR5210C
HR5211C
Tungsten carbide-tipped bit

Bit diameter Length (mm) Type Part No. Bit diameter Overall Working Type Part No.
(mm) (mm) length (mm) length (mm)
12 340 2 cutter D-33875 32 Mining B-14613
12 540 2 cutter P-17049 32 570 450 Mining B-15045
14 340 2 cutter D-33897 920 800
14 540 2 cutter D-33906
15 340 2 cutter D-33912 SDS-PLUS HSS-TiN metal drill bit
15 540 2 cutter D-33928
16 340 2 cutter D-33934 Fully ground HSS drill bit
16 540 2 cutter P-77746
18 340 2 cutter D-33956 Size: mm Overall Working Per pkg. Part No.
20 340 2 cutter D-33978 length (mm) length (mm)
20 540 2 cutter D-33984 Bit diameter 1 B-57401
22 340 2 cutter D-33990 (mm) 90 33 1 B-57417
22 540 2 cutter D-34001 3 100 39 1 B-57423
24 340 2 cutter D-34017 3.5 105 43 1 B-57439
24 520 2 cutter P-17251 4 110 47 1 B-57445
24 540 2 cutter D-34023 4.5 116 52 1 B-57451
25 340 2 cutter D-34039 5 123 5 1 B-57467
25 540 2 cutter D-34045 5.5 123 57 1 B-57473
28 370 2 cutter D-34051 6 131 63
28 570 2 cutter D-34067 6.5
30 370 2 cutter D-34073
32 370 2 cutter D-34095 SDS-PLUS Wood Drill bit
35 370 2 cutter D-34110
35 570 2 cutter P-17382 Size: mm Overall Working Per pkg. Part No.
38 370 2 cutter D-34132 length (mm) length (mm)
38 570 2 cutter D-34148 Bit diameter 1 B-57489
40 370 2 cutter D-34154 (mm) 105 43 1 B-57495
12 305 2 cutter A-17413 4 116 52 1 B-57504
16 305 2 cutter A-17479 5 123 57 1 B-57510
18 305 2 cutter A-17500 6 147 75 1 B-57526
19 305 2 cutter A-17516 8 163 87
20 305 2 cutter A-17522 10
22 305 2 cutter A-17544
25 320 4 cutter head A-17550 Drill bit assortment with SDS-PLUS shank
28 370 4 cutter head A-17566
32 370 4 cutter head A-17572 5pc. assortment Description Part No.
35 370 4 cutter head A-17588 B-57532
38 370 4 cutter head A-17594 39 for metal 3, 4mm
17.5 540 4 cutter head A-19401 for wood 4, 5, 6mm
18 540 4 cutter head A-19417
19 540 4 cutter head A-19423
20 540 4 cutter head A-19439
21.5 540 4 cutter head A-19445
22 540 4 cutter head A-19451
24 540 4 cutter head A-19467
25 540 4 cutter head A-19473
26 540 4 cutter head A-19489
28 540 4 cutter head A-19495
30 540 4 cutter head A-19504
32 540 4 cutter head A-19510
35 540 4 cutter head A-19526
38 540 4 cutter head A-19532
40 570 4 cutter head A-30461

Drilling (Masonry)

SDS-PLUS Sleeve chuck bit holder

With magnet

Length (mm) Shank Type Part No.
80 SDS-PLUS B-57548

Tools for Hex Shank Hammers

TCT drill bit for 17mm Hex Shank Hammers

Bit diameter Overall Working Part No.
(mm) length (mm) length (mm)
16 D-20127
16 280 155 D-20133
18 505 365 D-20149
18 280 155 D-20155
19 505 365 D-20161
19 280 155 D-20177
20 505 365 D-20183
20 280 155 D-20199
22 505 365 D-20208
22 280 155 D-20214
26 505 365 D-20220
26 280 155 D-20236
28 505 365 D-20242
28 280 155 D-20258
32 505 365 D-20264
32 280 140 D-20270
35 505 360 D-20286
35 280 140 D-20292
505 360

40

Drilling (Masonry)

Chisels

For For

Shape Application SDS- SDS- 17mm 19mm 21mm 28.6mm 30mm Makita
Self sharpening bull point Hex Hex Hex Hex Hex Small
Bull point Demolition and adjustment work in PLUS MAX
Cold chisel masonry and concrete. ··
Grooving chisel hammers hammers
Scaling chisel Chipping and breaking in masonry and
Clay spade concrete. ·
Rammer
Bushing tool Starts holes in concrete
Scraper No time consuming resharpening is

needed.

Demolition and adjustment work in
masonry and concrete.

Chipping and breaking in masonry and

· · · · · · · ·concrete.

Starts holes in concrete

Adjustment work in masonry and ·······
concrete.

Chipping, breaking, edging and

channeling in masonry and concrete.

· · ·Cutting channels in concrete. ·

Removing concrete residues. ········

Digging in clay, hard gravel, hard packed ······
gravel, soil and dirt.

Tamping asphalt and compacting gravel, ······
soil and dirt.

Roughing concrete and asphalt up. ·· ·

Scraping oor tiles,linoleum oord and · ·
clean-up.

41

Drilling (Masonry) Chisel for SDS-PLUS Hammers set
(with aluminum case)
Tools for SDS-PLUS Hammers

Bull point for SDS-PLUS Hammers

(For demolishing concrete)

Length (mm) Part No. Description Size (mm) Each Sum Part No.
3 D-05181
160 D-08034 Bull point 250 1 4 D-08757
250 D-08713 Cold chisel 20 x 250 1 5 D-16368
Scaling chisel 40 x 250 1
Bull point 2
Cold chisel 250 2
Bull point 20 x 250 2
Cold chisel 2
Scaling chisel 250 1
20 x 250
40 x 250

Cold chisel for SDS-PLUS Hammers

(For chipping, edging, channeling and breaking away larger chunks of concrete)

Tools for SDS-MAX Hammers

Length (mm) Part No.

20 x 250 D-08729
20 x 400 D-19021

Bull point for SDS-MAX Hammers

(For demolishing concrete)
*10pcs set

Scaling chisel for SDS-PLUS Hammers

(A wide chisel for chipping away scale of dried concrete spatter)

Length (mm) Part No. Length (mm) Part No. Length (mm) Part No.

38 x 200 A-30483 300 D-34176 400 D-34182
40 x 250 D-08735 280 D-80787 400 D-80793
50 x 215 D-25616

Self-Sharpening Bull point for SDS-MAX Hammers

Scraper assembly for SDS-PLUS Hammers

(For removing linoleum tile and other ooring)

Length (mm) Part No.
400 B-10621

Length (mm) Type Part No. Cold chisel for SDS-MAX Hammers
100 Cutter 343411-9
(For chipping, edging, channeling and breaking away larger chunks of concrete)
*10pcs set

Size (mm) Part No. Size (mm) Part No.

25 x 300 D-34207 25 x 400 D-80818
25 x 280 A-80802 24 x 600 A-87482
25 x 400 D-34213

42

Drilling (Masonry) Tools for 17mm Hex Shank Hammers

Scaling chisel for SDS-MAX Hammers

(A wide chisel for chipping away scale of dried concrete spatter)

Size (mm) Part No. Bull point for 17mm Hex Shank Hammers

50 x 400 A-80824 (For demolishing concrete)
50 x 400 D-34235

Scaling chisel for Tile (for SDS-MAX Hammers) Size (mm) Part No.

280 D-08682
450 D-16863

Size (mm) Part No. Sharper Edge Bull Point (8 degrees edge)
50 x 300 A-80830 for 17mm Hex Shank Hammers

Bushing tool for SDS-MAX Hammers

(For concrete surface removal)
• Use with shank (A-19897)

Length (mm) Part No. Length (mm) Part No.
280 D-26303 350 D-29860

Size (mm) Part No. Cold chisel for 17mm Hex Shank Hammers
67 x 67 A-19881
(For chipping, edging, channeling and breaking away larger chunks of concrete)

Rammer for SDS-MAX Hammers Size (mm) Part No.

A: Dia. 19 x 210 D-26587
(For tamping) 19 x 280 D-08707
• Use with shank (A-19897) 19 x 450 D-16879

Diameter (mm) Part No. Grooving chisel for 17mm Hex Shank Hammers
140 A-19875
(For grooving, channeling or removal of heavy scale,
especially in narrow or recessed areas.)

Concrete Core Cutter for SDS-MAX Hammers

Length (mm) Part No. Length (mm) Part No.
22 x 280 A-48555 26 x 280 A-48561

Bit diameter (mm) Overall length (mm) Part No.

40 550 B-57629
45 550 B-57635
45 990 B-57641
55 550 B-57657
55 990 B-57663
65 550 B-57679
65 990 B-57685
80 550 B-57691
80 990 B-57700

43

Drilling (Masonry) Tools for 28.6mm Hex Shank Hammers

Scaling chisel for 17mm Hex Shank Hammers

(A wide chisel for chipping away scale of dried concrete spatter)

Size (mm) Part No. With Brim Without Brim

50 x 280 A-80606
50 x 280 D-20694

Self sharpening bull point for 28.6mm Hex Shank Hammers

(For demolishing concrete)

Scaling chisel for 17mm Hex Shank Hammers

(For concrete surface removal)

Length (mm) Part No. Length (mm) Brim Part No.
60 x 60 A-21484 400 Without B-10372

Bull point for 28.6mm Hex Shank Hammers

(For demolishing concrete)

Tools for 21mm Hex Shank Hammers

Length (mm) Brim Part No.
410 Without D-17631

Bull point for 21mm Hex Shank Hammers

(For demolishing concrete)

Cold chisel for 28.6mm Hex Shank Hammers

(For chipping, edging, channeling and breaking away larger chunks of concrete)

Size (mm) Part No. Size (mm) Brim Part No.
28 x 410 Without D-17647
320 D-16499
450 D-23824

Cold chisel for 21mm Hex Shank Hammers Scaling chisel for 28.6mm Hex Shank Hammers

(For chipping, edging, channeling and breaking away larger chunks of concrete) (A wide chisel for chipping away scale of dried concrete spatter)

Length (mm) Part No. Size (mm) Brim Part No.
75 x 410 With D-29228
26 x 320 D-17588
26 x 450 D-17594

Scaling chisel for 21mm Hex Shank Hammers Tools for 30mm Hex Shank Hammers

(A wide chisel for chipping away scale of dried concrete spatter)

Length (mm) Part No.
70 x 320 A-20672

44

Drilling (Masonry) Scraper assembly for Makita Small Shank

Bull point for 30mm Hex Shank Hammers (For removing linoleum tile and other ooring)

(For demolishing concrete)

Length (mm) Part No. Size (mm) Type Part No.
400 D-15285 100 Cutter 343411-9

Cold chisel for 30mm Hex Shank Hammers

(For chipping, edging, channeling and breaking away larger chunks of concrete)

Size (mm) Part No.
30 x 400 A-15300

Scaling chisel for 30mm Hex Shank Hammers

(A wide chisel for chipping away scale of dried concrete spatter)

Size (mm) Part No.

75 x 310 D-23868
100 x 310 A-25183

Tools for Makita Small Shank

Bull point for Makita Small Shank

Length (mm) Part No.
220 B-06921

Scaling chisel for Makita Small Shank

(A wide chisel for chipping away scale of dried concrete spatter)

Size (mm) Part No.

30 x 150 B-07331
50 x 150 B-07347

45

ACCESSORIES

Fastening

Hex (H) PZ Square (SQ) Slotted (SL)
Phillips (PH) TH With magnet
T Made of For 3/8" square drive For 1/2" square drive
chrome-molybdenum
Made of chrome-molybdenum alloy steel
alloy steel

46

Fastening

33.Thread rod socket bit

Threaded rod
Roller
Socket

In general working with a threaded By adding rotating power on a
rod, a hand tool is used. socket bit, 3 cylindrical rollers
This is a socket bit to use an electric hold threaded rod without
power tool for working with a damaging it.
threaded rod e ciently.

34.Hollow socket

Hollow inside Suitable to screw a nut on a long protruded bolt.
Hollow inside and light bit is useful for upward work.

Dodecagonal Dodecagonal Pressed into Screwing nuts on bolt at high
socket shape is easy socket place
to t on nut.
The bit part is pressed into socket part to be
tough and durable.

Bit Catcher

Easy attachable and detachable
by one touch action.
Easy bits replacing at high place.

47

Fastening

Screw bit 1/4'' Hex Shank (C-form) Flexible bit holder
C-form
A Flexible extension for driving into hard to access corners.
With magnet

Overall Part No.
length (mm)

1/4'' Hex Shank (E-form) NZ MZ 300mm B-29094

B E-form
(Single Ended)

C E-form Flexible tough bit holder
(Double Ended)
It is able to use with Impact Driver.
Flexible extension for driving into hard to access corners.

Bit piece for screwdriver & impact driver

You can change from MZ type bit to NZ type bit.

MZ type + = NZ type Overall length (mm) Shank type Part No.
300mm NZ-B B-51851

Part No. Screw bit for screwdriver (E-form)
322279-6

Drive type 1/4''Hex (NZ)

Size Length Shank Per Model No. Part No.
(mm) Type pkg.
DFR440, 6845, 6841R A-45858
Phillips PZ Hex (H) T TH Square Slotted PH 2 122 NZ-B 5 6833 series, 6835D A-16536
(PH) (SQ) (SL) 5 B-10481
PH 2 132 NZ-B 5 6842, 6843, DFR540, DFR550 B-10475
5 6844, DFR750
PH 2 162 NZ-B

PH 2 182 NZ-B

Magnetic Bit Holder for screwdriver 10pcs. Double ended Screw bit set

With magnet Flexible extension for driving into hard to access corners.
With magnet

1/4''Hex (MZ) Shank Type Per pkg. Part No. 1/4''Hex (NZ) Length Shank Per pkg. Part No.
(mm) Type
Length (mm) MZ-B 1 784811-8 Size NZ-C 10 D-34827
60 MZ-B 1 784801-1 45 NZ-C 10 D-33679
76 PH 2 65 NZ-C 10 D-34833
PH 2 110 Slim 10 B- 90015
Ultra mag torsion bit holder PH 2 65
PH 2
1/4''Hex (MZ)

With strong magnet

Length (mm) Shank Type Per pkg. Part No.
79 MZ-B 1 B-28531

48

Fastening

Double ended Screw bit Magnet nutsetter

1/4''Hex (NZ) Length Shank Per pkg. Part No. With magnet
(mm) Type 798308-1
Size NZ-C 3 784229-3 1/4''Hex (MZ or NZ)
45 NZ-C,Hard 1 784203-1
PH 2 45 NZ-C 1 784230-8 Size A Length (mm) Shank Type Per pkg. Part No.
PH 2 65 NZ-C,Hard 1 784206-5 MZ or NZ-B 1 B-38934
PH 2 65 NZ-C 1 M5 8mm 50
PH 2 110 784614-0
PH 2

PH2 - SL0.8 45 NZ-C 1

Magnet nutsetter 5pcs. Assortment

With magnet

Double ended twist torsion screw bit

1/4''Hex (MZ or NZ)

A (mm) Length (mm) Shank Type Per pkg. Part No.
6,8,10,12,13 50 MZ or NZ-B 1pc each B-39176

With magnet

* Japanese Package Length Shank Per pkg. Part No. Magnet nutsetter 4pcs. assortment (C-form)
1/4''Hex (NZ) (mm) Type
NZ-C 3 A-59570* With magnet
Size 90 NZ-C 3 A-59601*
PH2 90

PH2 (Slim)

A (mm) Length (mm) Shank Type Per pkg. Part No.
8,10,12,13 48 A 1pc each B-57554

Double ended silver torsion screw bit

12pcs. Screw Bit Set with magnetic bit holder

1/4''Hex (NZ) PZ1,PZ2,PZ3 x 25mm
PH1,PH2,PH3 x 25mm

T10, T15, T20, T25, T30 x 25mm Magnetic Bit Holder NZ

With magnet Part No.
D-31011

1/4''Hex (MZ) Length Shank Per pkg. Part No. 31pcs. Screw Bit Set easy removable bit holder case
Size (mm) Type 3 B-12326
PH 2 MZ-C
85

PH1, 2xPH2, PH3 x 25mm PZ1, 2xPZ2, PZ3 x 25mm

* Japanese Package 3xT10, 3xT15, 4xT20, 4xT25, 3xT30, 2xT40 x 25mm,
1/4''Hex (NZ)
Length Shank Per pkg. Part No. H4, H5, H6 x 25mm, Magnetic Bit Holder MZ
Size (mm) Type
NZ-C 3 A-49563 * Part No.
PH 2 65 NZ-C 6 A-49579 * D-34936
PH 2 65 NZ-C 3 A-49585 *
PH 2 85 NZ-C 3 A-49600 *
PH 2 110 NZ-C 3 A-50120 *
PH 2 150 NZ-C 10 B- 52037
PH 2 110

49

Fastening

21pcs. Screw Bit & Socket Set with Rachet Handle Tilt Socket Adapter

The socket can tilt up to 15°angle to assist fastening in con ned applications.

PH1, PH2, PH3 x 25mm PZ1, PZ2 x 25mm

SL0.8x5.5,SL1.2x6.5 x 25mm

T20,T25,T30 x 25mm

H4, H6 x 25mm

Socket,H5,H6,H8,H10,H12,H13 1/4''Hex (MZ)
Magnetic Bit Holder MZ
Rachet Handle 1/4"

Part No. 1/4''Hex (MZ)
B-54081
Size
11pcs. Torsion screw bit set SQ 3/8'' Length (mm) Shank Type Per pkg. Part No.
SQ 1/2''
1/4''Hex (MZ) 56 MZ-B 1 B-28547
PH1,PH2,PH3 x 25mm 56 MZ-B 1 B-28553
PZ1,PZ2,PZ3 x 25mm
T15, T20, T25, T30 x 25mm Candy Jar

Torsion Bit Holder With magnet

Part No. Size Length (mm) Type Pc. / Pkg. Part No.
B-28597 Ph 2 45 NZ-A 100 D-31653

PH1,PH2,PH3 x 25mm PZ1,PZ2,PZ3 x 25mm,

T15, T20, T25, T30 x 25mm Mini Candy Jar case Screw bit Set
Ultra Mag Torsion Bit Holder

Part No.
B-30754

Socket Adapter set. Size Type Per pkg. Part No.

Ph 2-50mm E-form (NZ) 50 B-25177
Ph 2-25mm C-form 100 B-24876

It allows impact driver to fasten or loosen bolt and nut. Screw bit set in Blister package
8,10,12,13,14,15,17,18mm
Socket adapter 50mm

1/4''Hex (NZ) Shank Type Per pkg. Part No. Size Type Per pkg. Part No.
Size NZ-B 1 B-55762
B-25030
SQ 1/2'' B-25046
B-25052
Ph 1-50mm E-form (NZ) 3
Ph 2-50mm E-form (NZ) 3
Ph 3-50mm E-form (NZ) 3

“MZ and NZ shank tube” is a Makita word. It is NOT a peneral term.

50