acc_cat_2018

Fastening Impact Socket (Bulk)

Flip Top case Screw bit Set

*3pcs / set
For Impact Wrenches with 1/2'' square drive.

Size Type Per pkg. Part No. A(mm) L(mm) Impact Socket Pin O-ring
Part No. Part No. Part No.
Ph 1-50mm E-form (NZ) 10 B-25111 10 38 B-10497 268056-1 213396-2
Ph 2-50mm E-form (NZ) 10 B-25127 12 38 A-89931 268056-1 213396-2
Ph 3-50mm E-form (NZ) 10 B-25133 13 38 134825-1 268056-1 213396-2
Ph 1-25mm 25 B-24577 14 38 134826-9 268056-1 213396-2
Ph 2-25mm C-form 25 B-24583 16 38 B-10506 268056-1 213396-2
Ph 3-25mm C-form 25 B-24599 17 38 134829-3 268056-1 213397-0
C-form 19 38 134831-6 268057-9 213398-8
21 38 134838-2 268057-9 213399-6
“MZ and NZ shank tube” is a Makita word. It is NOT a peneral term. 22 38 134851-0 268057-9 213399-6
23 38 134840-5 268057-9 213399-6
Screw bit set in the Bag 24 45 134841-3 268057-9 213399-6
26 50 134842-1 268057-9 213399-6
With magnet 27 50 134844-7 268057-9 213399-6
30 50 134846-3 268057-9 213399-6
32 50 134848-9 268057-9 213399-6
13 52 134827-7 268056-1 213397-0
14 52 134828-5 268056-1 213397-0
17 52 134830-8 268056-1 213397-0
19 52 134832-4 268057-9 213398-8
21 52 134833-2 268057-9 213398-8
22 52 134834-0 268057-9 213398-8
23 52 134835-8 268057-9 213398-8
24 52 134836-6 268057-9 213398-8

B-24985 B-25199 213370-0
213399-6
Size Type Per pkg. Part No. Deep type 75 134867-5 256095-3 213399-6
213399-6
Ph 2-50mm E-form (NZ) 50 B-25199 12 78 134837-4 268057-9 213399-6
Ph 2-25mm C-form 100 B-24985 19 213399-6
21 78 134839-0 268057-9 213399-6
26
“MZ and NZ shank tube” is a Makita word. It is NOT a peneral term. 27 78 134843-9 268057-9
30
32 78 134845-5 268057-9

78 134847-1 268057-9

78 134849-7 268057-9

Impact Socket

For Impact Wrenches with 19mm (3/4'') square drive

For Impact Wrenches with 3/8'' square drive. A(mm) L(mm) Impact Socket Pin O-ring
Part No. Part No. Part No.
A(mm) L(mm) Part No. A(mm) L(mm) Part No. 26 52 134853-6 213461-7 256283-2
32 52 134871-4 213514-2 256282-4
6 28 B-39883 15 28 B-39970
7 28 B-39899 16 28 B-39986
8 28 B-39908 17 30 B-39992
9 28 B-39914 18 30 B-40004
10 28 B-39920 19 30 B-40010
11 28 B-39936 20 30 B-40026
12 28 B-39942 21 30 B-40032
13 28 B-39958 22 30 B-40048
14 28 B-39964

51

Fastening Hollow socket bit

Impact Deep Socket (Bulk) Able to screw nut to the middle of the threaded rod. Hollow inside makes the
bit lighter.

A(mm) L(mm) Impact Socket Pin O-ring
Part No. Part No. Part No.
12 75 134867-5 256095-3 213370-0
19 78 134837-4 268057-9 213399-6
21 78 134839-0 268057-9 213399-6
26 78 134843-9 268057-9 213399-6
27 78 134845-5 268057-9 213399-6
30 78 134847-1 268057-9 213399-6
32 78 134849-7 268057-9 213399-6

Socket Extension 1/4''Hex (MZ) Length Shank Type Per pkg. Part No.

1/2''anvil A (mm) 75mm MZ-B 1 B-52526
150mm MZ-B 1 B-52532
A(mm) Length anvil Impact Socket Pin O-ring 10mm 300mm MZ-B 1 B-52548
(mm) Part No. Part No. Part No. 10mm 500mm MZ-B 1 B-52554
SQ1/2'' SQ1/2'' B-55706 B-54586 B-54542 10mm 700mm MZ-B 1 B-52560
SQ 1/2'' 75 SQ 1/2'' B-55712 B-54586 B-54542 10mm 75mm MZ-B 1 B-52576
SQ1/2'' 150 SQ1/2'' B-55728 B-54586 B-54542 10mm 150mm MZ-B 1 B-52582
300 13mm 300mm MZ-B 1 B-52598
13mm 500mm MZ-B 1 B-52607
Threaded rod socket bit 13mm 700mm MZ-B 1 B-52613
13mm 75mm MZ-B 1 B-52629
By rotating the threaded rod inserted into the socket bit, the pins inside of the 13mm 150mm MZ-B 1 B-52635
socket move towards the center of the socket along to the inner surface of the 17mm 300mm MZ-B 1 B-52641
socket and grip the threaded rod tightly. With that state, able to screw the threaded 17mm 500mm MZ-B 1 B-52657
rod by rotating the socket bit. 17mm 700mm MZ-B 1 B-52663
17mm
17mm

Bit Catcher

Part No. Type

B-63096 Blue
B-63105 Black

1/4''Hex (MZ) Length (mm) Shank Type Per pkg. Part No.

Size 66 MZ-B 1 B-42961
66 MZ-B 1 B-42977
M6 66 MZ-B 1 B-42983
M8 66 MZ-B 1 B-51611
M10 66 MZ-B 1 B-51627
3/8''
1/2''

52

ACCESSORIES

Drill and Screw Bit Sets

53

Drill and Screw Bit Sets Drill bit assortment with 1/4'' Hex. shank

71pc. bit & hand tool set (6pc. set) 1/4''Hex (MZ)

Masonry Drill Bit x6pcs. Wood Drill Bit x5pcs, Flat Bit x3pcs. HSS-R Drill Bit x11pcs. for metal 5, 6, 8mm, for wood 5, 6mm
Measure 3m, Diameter gauge 1-10mm, countersink, Screw bit 50mm x10pcs. metric size Type MZ
Socket x7pcs. Screw bit 25mm x24pcs. Magnetic Bit Holder, Part No.
Socket Adapter for 25mm screw driver D-31516

for masonry 6mm, for wood 5, 6mm, for metal 5, 6mm
metric size Type MZ
Part No.
D-31522

metric size Type NZ (Bulk, without counter display) Drill bit assortment
Part No.
D-53001 9 pc assortment
5, 6 and 8 mm of 3 di erent types.
103pc. Bit & Hand Tool Display Set (5pc. set) HSS-TiN drill bit (for metal)
Carbide tipped drill bit (for masonry)
Masonry Drill x7pcs. Wood Drill x7pcs. Flat Bit x3pcs. HSS-R Drill Bit x11pcs, Hole saw, Wood drill bit (for wood)
Hole saw arbor, Depth stop, Measure 3m, Diameter gauge 1-10mm, Hex key wrench,
Level, Countersink, Screw bit 25mm x24pcs, Magnetic Bit Holder, Socket x7pcs. Part No.
Socket Adapter for 25mm screw driver, Long nose plier, Comnination plire, D-08660
Adjustable wrench, Nail hammer
Drill bit assortment

metric size Type NZ (Bulk, without counter display) 9pc. assortment
Part No.
D-53017 HSS-TiN drill bit , Carbide tipped drill bit, Wood drill bit
metric size
30pc. combination set Part No.
D-30069
HSS-R Drill Bit x4pcs. Masonry Drill Bit x4pcs. Wood Drill Bit x4pcs.
Screw bit 25mm x16pcs. Magnetic Bit Holder, Countersink HSS metal drill 5pc. drill bit assortment

for metal 5/ 6/ 8mm, for wood 6/ 8mm

metric size, Type MZ
Part No.
D-30106

17pc. combination set

HSS-R Drill Bit x4pcs. Masonry Drill Bit x 4pcs.
Screw bit 25mm x12pcs. Magnetic Bit Holder

metric size Type NZ (Bulk, without counter display)
Part No.
D-53702

metric size Type NZ
Part No.
D-53693

54

ACCESSORIES

Cutting

Dia / Bore No. Teeth Kerf Thickness
Rake Ring Rip cut Cross cut
Tip Embedded Silent M-Force Fast Cut
Clean Cut Extra Clean Cut Coated Heavy Duty
Long Life PCD Tip Sharp

55

Cutting ATAFR M-FORCE FTG

Carbide-tipped saw blade

Tooth shape

ATB ATAF

TCG MTCG SMTCG Hi-ATB

Technical term Coated Tip Embedded P.C.D Tip

Laser Slit

Vibration dampening system PTFE (polytetra uoroethylene) Inserted tooth design will greatly PCD (Poly-Crystalline Diamond)
Resinbond lled laser cut body coating plate to reduce pitch increases the body-to-tip braze tips has extreme hardness and
slots for smoother and quieter build-up and to lower resistance. area for greater support and tip wear resistance. PCD tipped saw
cuts. strength. blade is the best choice for long
lasting performance when
cutting ber cement board.

56

Title

1 Specialized for cordless tools

The amount of cutting per 1 charge

100 × 2.4
more
1.6mm

240

EFFICUT Blade 0 100 200
1.0mm

1. The test results depend to a great extent on the hardness of wood materials, etc.
2. The cutting amount bar graphs are relative values when the capacity of current blade (Thickness : 1.6 mm) is indexed at 100.

2 Fast cutting

Cutting speed

100 × 2.5
faster
1.6mm
250
EFFICUT Blade 0 100
1.0mm 200

3 Feature of the new tip shape

1. Reduced the area contacting the work material.
2. Increases e ciency of release waste.
3. Make top bevel angle sharp.

57

Cutting

General Package

*These items are available on request. Contact us for the minimum order quantity.

Standard Blade

General Package Bore Ring Kerf Plate No. of Rake Tooth Material Note Per pkg. Part No.
Outer (mm) (mm) (mm) (mm) teeth shape

diameter (mm)

(Cordless Saw) 15 1 0.7 20 10 ATB Wood 1 B-14607
20 Wood 1 B-09949
85 20 1.5 1.0 16 20 ATB Wood 1 A-85101
136 20 Wood 1 A-85226
165 20 1.5 1.0 24 20 ATAF Wood 1 A-85189
165
165 1.6 1.0 40 18 ATAF

1.6 1.0 52 20 ATAF

Ideal for Cordless Circular Saw

Outer Bore Ring Kerf Plate No. of Rake Tooth Material Note Per pkg. Part No.
diameter (mm) (mm) (mm) (mm) (mm) teeth shape Wood/MDF
ATAFR
165 20 1.45 1.0 56 23 1 B-57364
Specialized for
cordless saws

Double cut tooth

Outer Bore Ring Kerf Plate No. of Rake Tooth Material Note Per pkg. Part No.
diameter (mm) (mm) (mm) (mm) (mm) teeth shape Coated / Laser Slit
1.45 1.0 23 MATAFR MDF / Wood 1 B-53279
165 20 1.45 1.0 44 23 MATAFR Wood 1 B-53285
165 20 44

58

Cutting

Ideal for Cordless Plunge Saw

Outer Bore Ring Kerf Plate No. of Rake Tooth Material Note Per pkg. Part No.
diameter (mm) (mm) (mm) (mm) (mm) teeth 23 shape Wood/MDF
ATAFR Wood/MDF
165 20 1.45 1 56 ATAFR 1 B-57364
Specialized for
cordless saws

165 20 1.6 1.1 55 20 Scpoerdcilaelsizsesdawfosr 1 B-57059

Ideal for Cordless Slide Compound Saw

Extra sharp tooth

Outer Bore Ring Kerf Plate No. of Rake Tooth Material Note Per pkg. Part No.
diameter (mm) (mm) (mm) (mm) (mm) teeth 20 shape MDF / Wood B-53291
1.7 1.3 ATBR (4+1)
190 20 60 Extra sharp Coated / Laser Slit 1
tooth Europe design

Outer Bore Ring Kerf Plate No. of Rake Tooth Material Note Per pkg. Part No.
diameter (mm) (mm) (mm) (mm) (mm) teeth shape
1.9 1.4 10 ATAF Wood Laser Slit 1 B-56487
165 20 1.8 1.2 64 5 Aluminum Laser Slit 1 B-56530
165 20 60 TCG

(Circular Saw) Bore Ring Kerf Plate No. of Rake Tooth Material Note Per pkg. Part No.
(mm) (mm) (mm) (mm) teeth shape
Outer 2.2 1.4 25 Wood 1 A-81371
diameter (mm) 20 1.6 24 18 ATB Wood 1 A-80612
20 1.8 1 40 20 ATAF Wood 1 B-16994
160 20 1.2 40 20 ATAF Wood 1 A-81898
160 20 2.2 1.4 40 20 ATAF Wood 1 B-02917
160 20 2 1.4 10 23 FTG Wood 1 A-86022
160 20 2 1.3 16 23 ATB Wood 1 A-86038
165 20 2 1.3 24 18 ATB Wood 1 A-86044
165 20 2 1.3 40 25 ATB Wood 1 A-81402
165 20 2.2 1.4 24 20 ATB Wood 1 A-81418
165 20 2.2 1.4 40 25 ATAF Wood 1 A-83814
180 20 1.85 1.3 20 18 ATB Wood 1 A-82476
180 20 1.6 1 40 18 ATAF Wood 1 A-85999
185 20 2 1.4 40 18 ATAF Wood 1 A-82482
185 20 1.6 1 60 20 ATAF Wood 1 A-87507
185 20 2 1.4 24 20 ATAF Wood 1 A-89947
185 25 2.3 1.6 20 20 ATB Wood 1 A-81474
190 25.4 2.6 1.8 60 20 ATAF Wood 1 B-10584
235 25.4 2.3 1.6 24 20 ATB Wood 1 B-12603
235 25 3 2.2 60 ATB
260
335

59

Cutting

(Circular Saw Economy)

Outer Bore Ring Kerf Plate No. of Rake Tooth Material Note Per pkg. Part No.
diameter (mm) (mm) (mm) (mm) (mm) teeth shape
10 Wood 1 *D-15578
110 20 20 1.7 1.1 24 18 ATB Wood 1 *D-03349
165 20 20 2 1.3 40 12 ATB Wood 1 D-50500
165 20 25 2 1.2 40 20 ATB Wood 1 *D-19037
185 20 25 1.8 1.2 24 15 ATB Wood 1 D-50522
185 25.4 2.2 1.4 24 18 ATB Wood 1 *D-03361
185 20 2 1.3 40 14 ATB Wood 1 D-50538
185 25.4 2.2 1.4 40 20 ATB Wood 1 *D-29066
210 25 2 1.3 24 18 ATB Wood 1 *D-03377
235 25.4 2.4 1.6 40 12 ATB Wood 1 D-50550
235 25.4 2.5 1.6 40 ATB

(Slide Compound Saw / Miter Saw)

Outer Bore Ring Kerf Plate No. of Rake Tooth Material Note Per pkg. Part No.
diameter (mm) (mm) (mm) (mm) (mm) teeth shape
20 2.2 1.6 5 Wood 1 B-03850
190 20 25 1.4 24 -5 ATB Wood 1 B-03866
190 20 25 2 1.4 24 10 ATB Wood 1 A-86751
190 20 25 2 1.4 40 -5 ATAF Wood 1 B-03981
190 20 2 1.4 60 5 ATB Wood 1 B-04008
190 20 2 1.4 60 10 ATB Wood 1 A-86359
190 25.4 2 1.8 72 5 ATAF Wood 1 A-83696
255 25.4 2.3 32 10 ATAF Wood 1 B-10322
255 25.4 2.2 1.7 40 5 ATAF Wood 1 B-03648
255 25.4 2.3 1.8 32 10 ATAF Wood 1 B-03654
255 25.4 2.2 1.7 40 15 ATAF Wood 1 A-82292
255 25 2.6 2 100 5 ATAF Wood 1 792695-0
260 25.4 2.3 1.8 64 0 ATAF Wood 1 B-57560
305 25.4 2.5 1.9 70 5 ATAF Wood 1 B-03660
305 25.4 2.3 1.8 40 10 ATB Wood 1 A-85472
305 25.4 2.6 2 60 5 ATAF Wood 1 B-02808
305 25.4 2.3 1.8 60 5 ATAF Wood 1 B-02814
305 25.4 2.3 1.8 96 5 ATAF Wood 1 B-03698
305 25.4 2.3 1.8 100 15 ATB Wood 1 A-82323
305 3 2.2 100 20 ATAF Wood 1 A-02618
355 25 3 2.2 60 10 ATB Wood 1 A-85488
355 25.4 2.6 2 60 15 ATB Wood 1 A-82351
355 25.4 3.4 2.4 100 ATAF

60

Cutting

(Table Saw) Bore Ring Kerf Plate No. of Rake Tooth Material Note Per pkg. Part No.
(mm) (mm) (mm) (mm) teeth shape
Outer 25.4 20 ATAF Wood 1 A-81430
diameter (mm) 25.4 25 2.4 1.6 40 20 Wood 1 B-05000
25.4 2.3 1.6 24 25 ATB Wood 1 A-82030
203 25.4 25 3.2 2.2 30 20 ATB Wood 1 B-05088
255 25.4 2.3 1.6 40 20 ATB Wood 1 A-81505
255 25.4 25 2.8 2 60 20 ATAF Wood 1 A-82105
255 25.4 25 3 2 60 20 ATAF Wood 1 A-81533
255 25.4 25 3.4 2.4 80 20 ATAF Wood 1 A-81561
305 25 3.6 2.6 80 ATAF
355
405

(Table Saw Economy)

Outer Bore Ring Kerf Plate No. of Rake Tooth Material Note Per pkg. Part No.
diameter (mm) (mm) (mm) (mm) (mm) teeth shape
25.4 25 Wood 1 B-17099
203 25.4 25 2 1.4 24 20 ATB Wood 1 B-17120
203 25.4 25 2 1.4 40 15 ATAF Wood 1 B-17142
203 25.4 25 2 1.4 60 15 ATAF Wood 1 B-17158
203 25.4 25 2 1.4 80 15 ATAF Wood 1 B-17295
255 25.4 25 2.4 1.8 80 20 ATAF Wood 1 B-17463
355 25 3 2.2 80 ATAF

Specialized plunge cutting

(Plunge Cut Circular Saw)

Outer Bore Ring Kerf Plate No. of Rake Tooth Material Note Per pkg. Part No.
diameter (mm) (mm) (mm) (mm) (mm) teeth shape
2.2 1.6 15 Wood 1 B-07434
165 20 2.2 1.6 28 8 ATB Wood 1 B-07353
165 20 2.4 1.7 48 5 ATB CORIAN® 1 B-10344
165 20 2.4 1.7 48 -3 TCG Aluminum 1 B-07440
165 20 56 TCG

Specialized MDF cutting

(Circular Saw) Bore Ring Kerf Plate No. of Rake Tooth Material Note Per pkg. Part No.
(mm) (mm) (mm) (mm) teeth -5 shape MDF 1 D-62474
Outer 15.88 TCG
diameter (mm) 20 2.2 1.4 52

165

61

Cutting

(Slide Compound Saw / Miter Saw)

Outer Bore Ring Kerf Plate No. of Rake Tooth Material Note Per pkg. Part No.
diameter (mm) (mm) (mm) (mm) (mm) teeth shape
25.4 10 MDF 1 D-62480
255 25.4 2.8 1.8 84 10 TCG MDF 1 D-62496
305 3 2 96 TCG

Specialized aluminum cutting

(Cordless Saw) Bore Ring Kerf Plate No. of Rake Tooth Material Note Per pkg. Part No.
(mm) (mm) (mm) (mm) teeth 0 shape Aluminum 1 B-40331
Outer
diameter (mm) 20 1.6 1 50 ATB

136

(Slide Compound Saw / Miter Saw)

Outer Bore Ring Kerf Plate No. of Rake Tooth Material Note Per pkg. Part No.
diameter (mm) (mm) (mm) (mm) (mm) teeth Shape
-5 Aluminum 1 B-03997
190 20 2 1.4 60 0 TCG Aluminum 1 A-81614
255 25.4 2.6 2 100 5 ATB Aluminum 1 A-02602
355 25 3 2.2 80 TCG

(Slide Compound Saw / Miter Saw Economy)

Outer Bore Ring Kerf Plate No. of Rake Tooth Material Note Per pkg. Part No.
diameter (mm) (mm) (mm) (mm) (mm) teeth Shape
25.4 100 5 Aluminum 1 *D-03414
260 15.88 3 2 5 TCG Aluminum 1 *D-16520
305 30 25 3 2.2 80 8 TCG Aluminum 1 *D-16592
355 30 3.3 2.35 120 TCG

(Table Saw) Bore Ring Kerf Plate No. of Rake Tooth Material Note Per pkg. Part No.
(mm) (mm) (mm) (mm) teeth Shape
Outer 25.4 2.8 2.2 100 0 Aluminum 1 A-82557
diameter (mm) 25.4 25 2.4 100 0 ATB Aluminum 1 A-81636
25 3 ATB
305
355

62

Cutting

Specialized metal cutting

Outer Bore Ring Kerf Plate No. of Rake Tooth Material Note Per pkg. Part No.
diameter (mm) (mm) (mm) (mm) (mm) teeth shape

(Cordless Metal Cutter) 1.5 1.2 30 0 MTCG Mild steel 1 B-07319

136 20 1.4 1.1 50 -15 ATB Thin sheet metal 1 B-07325
136 20
136 20 1.1 0.95 56 0 SMTCG Stainless/Mild steel Laser Slit 1 B-23117
150 20
150 20 1.5 1.2 32 0 MTCG Mild steel 1 B-46296
150 20
1.4 1.1 52 -15 ATB Thin sheet metal 1 B-47008

1.1 0.95 60 0 SMTCG Stainless/Mild steel Laser Slit 1 B-47014

(Metal Cutter) Bore Ring Kerf Plate No. of Rake Tooth Material Note Per pkg. Part No.
(mm) (mm) (mm) (mm) teeth Shape
Outer 1.9 1.5 0 Mild steel Long Life 1 B-04628
diameter (mm) 20 1.6 36 0 ATB Mild steel Long Life 1 A-85438
20 2 1.6 38 0 MTCG Thin mild steel Laser Slit 1 A-83967
185 20 2 1.3 48 -10 MTCG Corrugated steel plate 1 A-86446
185 20 1.7 1.5 70 0 FTG Mild steel 1 B-23357
185 20 1.85 1.5 48 0 SMTCG Thin mild steel 1 B-23391
185 20 1.8 1.3 56 0 SMTCG Stainless/Mild steel 1 B-31697
185 20 1.6 64 SMTCG
185
185

(Metal Cutting Saw)

Outer Bore Ring Kerf Plate No. of Rake Tooth Material Note Per pkg. Part No.
diameter (mm) (mm) (mm) (mm) (mm) teeth Shape Laser Slit
25.4 2.1 1.7 0 Mild steel Laser Slit 1 A-87242
305 25.4 2.4 60 0 TCG Mild steel 1 A-86723
305 25.4 2.5 2 60 0 TCG Mild steel 1 A-81860
305 25.4 2.3 2.2 60 0 TCG Thin mild steel 1 A-87127
305 25.4 1.95 2 78 -3 MTCG Stainless/Mild steel 1 B-23151
305 1.65 100 SMTCG

for CA5000

Outer Bore Ring Kerf Plate No. of Rake Tooth Material Note Per pkg. Part No.
diameter (mm) (mm) (mm) (mm) (mm) teeth Shape
5 Aluminium composite 1 B-48832
118 20 14 6 6 5 90° Aluminium composite 1 B-48860
118 20 18 6 6 135°

63

ACCESSORIES

Jigsaw / Reciprosawing

Tungsten carbide tipped Diamond Grit Grit size Straight cutting
Curved cutting Fine cut Coarse cut Thick material
Thin material Ground teeth Number of teeth per inch Do not use orbital mode
Use coolant, cool

64

Jigsaw / Reciprosawing Ground and side set teeth

Jig Saw blade

Teeth Type

Milled and side set teeth

Milled and wavy set teeth Ground and taper ground teeth

Teeth manufacture Ground teeth
• Costly type of manu-
Milled teeth
• Low cost type of facturing

manufacturing • Very sharp!
• For general cutting • Accurate, clean cut
• Soft to hard materials • Soft to medium hard
• Long blade life
materials
Production method
• Side set: each individual tooth is alternately Side set Wavy set Ground

bent to the left and to the right. Raker setting
Example: right, left, straight, etc.

• Wavy set: row of teeth receives a wave shape
• Ground: blade body tapers to the rear (conical)

Jig Saw Blade material

• HCS (High Carbon Steel) for cutting softer materials such as wood or plastics.

• HSS (High Speed Steel) for cutting harder materials such as metals.

• BiM (Bi-metal, HCS base and HSS teeth)

for cutting soft materials to hard materials such as wood, metal, plastics.

• TC (Tungsten Carbide) for cutting glass ber reinforced plastic, cement-bonded berboards or plasterboard.

65

Jigsaw / Reciprosawing

Japanese Teeth Reciprosaw Blade

Feature Application
1. Japanese teeth for Sharp Edge! For Bamboo

15TPI

Back Front
Upward

3 sharpened edges cut smoothly the ber of the For Green Wood
bamboos and trees.
8.5TPI
2. Clean Cutting Surface Normal
New

Perfect Finish! Bad Finish...
TC Reciprosaw Blade

Application
For Cast Iron

Feature
Tungsten Carbide Tip

Cutting life 30 times than current BIM blade For Stainless

66

Jigsaw / Reciprosawing

Makita type Jig Saw blade

For Model:
4300BA/B, 4326M, 4327M

Wood
Plywood

(mm)
Plastics
(mm)
Aluminum
(mm)
Stainless
Steel (mm)
Mild Steel
(mm)
Working
Length
(mm)
Tooth Per

Inch
Mate rial
Type of
cutting
Shape No. Features / Per Part No.
Application pkg.

Wood/ Basic

3 3-50 3-50 - - - For general cutting 60 9 HCS 5 A-85868
5 A-85830
16 3-50 3-50 - - - For scroll cutting 60 9 HCS
5 A-85911
Wood/ Fast 8 4-50 4-50 - - - For fast cutting 60 8 HCS
Wood/ Finish 5 A-85927
5 A-85818
9 4-50 4-50 - - - For fast nish work 60 8 HCS 5 A-85824
5 A-85933
For fast nish work,
5 A-85852
10 4-50 4-50 - - - especially suitable 60 9 HCS 5 A-85874
5 A-85846
for plywood

Splinter-free cuts in

10S 3-50 - - - - wood, 62 13 HCS

requiring no sanding

Splinter-free cuts in

BR-3 50 - - - - wood requiring no 60 9 HCS

sanding

Hardwood / Decorative veneers 2 3-50 3-50 2-6 - 2-6 For decorative 60 14 HSS
Finish for decorative veneers veneers. 9 HSS
Metal/ Basic 14 HSS
For hardwood, thick
4 3-50 3-50 3-6 - 3-6 mild steel plate and 60 12 HCS
16 HSS
tough plastics

Ideal for scroll
17 2-50 2-50 2-6 - 2-6 cutting of decorative 63

veneer

Reverse tooth for

41 3-50 3-50 - - - splinter-free cuts.for 60 5 A-85880
tough plastic and 5 A-85896

decorative veneers

42 2-50 2-50 - - - For decorative 60
veneer

For mild steel. Also

1 - 1-6 1-3 0.5-3 1-3 suitable for 60 24 HSS 5 A-85802
corrugated plastics 5 A-85905

and tough plastics

5 - 1.5-6 1-6 - 1-3 For mild steel 42 24 HSS

67

Jigsaw / Reciprosawing

Bayonet type Jig Saw blade

For Model: DJV181, DJV182, DJV141, DJV142, DJV180, DJV140, JV183D, JV143D,
JV0600, JV100D, J V101D, JV102D, JV103D DJR185, DJR145, JR102D, JR105D,
4326, 4327, 4328, 4329, 4350T/CT/FCT, 4351T/CT/FCT

Wood Plywood Per Part No.
(mm) pkg.

Plastics (mm)
Aluminum (mm)
Stainless Steel

(mm)
Mild Steel (mm)
Working Length

(mm)
Tooth Per Inch

Mate rial
Type of cutting
Shape No. Features / Application

Super Express Jig saw Blade B-50 5-50 5-50 - - - For fast nish work in 77 8.5- HCS 5 B-06460
Wood/ Basic wood and plastic 10.6 5 B-06476
Wood/ Fast 5 B-06482
Wood/ Finish B-51 - - - 1-3 1-8 Fast cut for mild steel, 77 9.8- HSS
stainless steel 18.1 5 A-85656
Hardwood / Decorative veneers 5 A-85678
B-52 5-50 5-50 3-35 3-5 3-8 Fast cut for universal 77 5.5- HSS 5 A-85662
materials 9.8 5 A-85709

B-13 4-65 4-65 - - - For general cutting 70 8 HCS 5 A-86577
5 A-85684
B-15 3-35 3-35 - - - Ideal for cutting thin 50 12 HCS 5 A-86309
materials 5 792726-5
5 A-85690
B-14 2-35 2-35 - - - Ideal for cutting thin 50 18 HCS 5 A-85232
materials
5 A-86583
B-18 2-35 2-35 - - - For scroll cutting 45 14 HCS 5 A-85628
5 A-85634
58 4-65 4-65 - - - For fast cutting 75 8 HCS 5 792691-8
5 A-85640
B-16 5-65 5-65 - - - For fast and rough 75 6 HCS 5 A-86290
cutting 100 6 HCS 5 A-80400
L-2 5-90 5-90 - - - 150 6 HCS 5 A-85793
B-16L 5-135 5-135 - - - For fast and rough
cutting 5 A-85765
5 A-85771
For fast and rough
cutting

B-17 5-60 5-60 - - - For fast and scroll cutting 70 6 HCS

B-8 4-65 4-65 - - - Hook angle: 2 degrees 75 8 HCS

59 4-65 4-65 - - - For fast nish work 75 8 HCS

B-10 3-65 3-65 - - - For fast nish work, 75 9 HCS
especially suitable for

plywood

B-11 3-60 3-60 - - - For fast nish work in 75 9 HCS
wood and plastics

B-10S 3-50 - - - - Splinter-free cuts in wood 65 13 HCS
requiring no sanding

B-12 5-65 5-65 - - - For fast nish work in 75 6 HCS
wood and plastics

L-1 5-90 5-90 - - - Ideal for cutting thick 100 6 HCS
materials

B-29 2-35 2-35 - - - For scroll cutting 42 16 HCS

BR-13 5-65 - --- Splinter-free cuts in 64 9 HCS
wood, requiring no

sanding

B-25 3-60 3-60 3-6 - 3-6 For hardwood, thick mild 75 9 HSS
steel plate and hard plastics.

For scroll cutting in
B-26 3-60 3-60 3-10 - 3-10 hardwoods and for hard 70 9 HSS

plastics.

68

Jigsaw / Reciprosawing

Wood Plywood Per
(mm) pkg.

Plastics (mm)
Aluminum (mm)
Stainless Steel

(mm)
Mild Steel (mm)
Working Length

(mm)
Tooth Per Inch

Mate rial
Type of cutting
Shape No. Features / Application Part No.
Finish for decorative veneers
Metal/ Basic B-19 3-50 3-50 - - - Reverse tooth for splinter-free 65 12 HCS 5 A-85715
cuts. For tough plastics and
For Plastics decorative veneers 5 A-86561
For Rubber 2 B-01323
For Fiber Cement 51 - 1.5-6 1.5-6 1-3 1-3 For mild steel 65 24 HSS 5 A-85737
5 A-85759
B-22 - 1-6 1-3 1-3 1-3 For mild steel, tough plastics. 50 24 HSS 5 A-85743
Espessialy for thin metal plate 5 A-85787
5 B-10431
B-24 - 1-3 1-2 0.5-2 0.5-2 For very thin metal plate 50 32 HSS 5 B-10447
5 B-10453
For decorative veneers, 3 B-10469

B-23 3-35 3-35 2-6 - 2-6 medium-thick metal 50 14 HSS

plate

B-27 - 1-6 1-3 1-3 1-3 For scroll cutting in mild 50 24 HSS
steel

For thin metal plate,

B-32 - - Ø65 - Ø65 - 1.5-3 pipes and pro les. Also 107 18 HSS

aluminium and plastics.

For midium-thick metal plate,

B-33 - - Ø65 - Ø65 - 2-3 pipes and pro les.Also 107 14 HSS

Aluminium

B-34 - 1.5-6 1.5-3 1.5-3 1.5-3 For mild steel, tough plastics. 50 18 HSS
Especially for thin metal plate

B-35 * - Ø114 2-6 - - For sandwich materials 154 14 Bi-
* Wood with nails -ø120 Metal

B-21 - 3-60 1-10 - - For plastics nish work 75 12 HSS 5 A-85721

B-K - - - - - Ideal for cutting of paper, 75 - HCS - 5 A-80416
cork, rubber, leather

B-60 - - - - - Fiber Cement/Plaster Board 5- 75 6 TC/HM - 3 B-06890
B-61 - 50, FRP/Plastic 5-20

- - - - Fiber Cement/Plaster Board 5- 105 6 TC/HM - 3 B-06909
80, FRP/Plastic 5-50

Economy type Jig Saw blade

For Model:
DJV181, DJV182, DJV141, DJV142, DJV180, DJV140, JV183D, JV143D, JV0600, JV100D, J V101D, JV102D, JV103D
DJR185, DJR145, JR102D, JR105D, 4326, 4327, 4328, 4329, 4350T/CT/FCT, 4351T/CT/FCT

Shape Wood Plywood Features / Application Working Tooth Per Material Type of Per Part No.
(mm) Length Inch cutting pkg.
(mm)
Plastics (mm)
Aluminum (mm)
Stainless Steel

(mm)
Mild Steel (mm)

4-50 - - - - Wood / Basic 74 8 HCS 5 D-34877
74 6 HCS 5 D-34883
4-50 - - - - Wood / Fast 74 6 HCS 5 D-34899
51 21 HSS 5 D-34908
4-50 - - - - Wood / Fast, Curved 74 9 HCS 5 D-44214

- - - - 1-3 Metal / Basic

4-50 - - - - Wood / Finish

69

Jigsaw / Reciprosawing

Jig Saw Blade 100pc/ pack

Type No. Application Part No. Type No. Application Part No.

Bayonet type B-10 Wood B-07674 No.1 Metal B-07783
No.2 Wood B-07799
Makita type No.3 Wood B-07808

Makita Jig Saw blade assortment

*Super Express Jig saw blade

Type No.1 Five different jig saw No.10 Part No.
Makita type B-10S blades in one packet S A-86882
B type No.2 No.3 No.8 A-86898
*B-06292
B-13 B-16 B-22 B-23

B type B-50 B-51 B-52 - -

Recipro saw blades for Model JR1000FT, JR102D

HCS / High carbon steel for cutting softer materials such as wood or plastics HSS / High speed steel for cutting harder materials such as metals,aluminium,and

non-metals For Cutting

Wood Plywood
(mm)

Plastics (mm)
Aluminum (mm)
Stainless Steel

(mm)
Mild Steel (mm)
Working Length

(mm)
Tooth Per Inch

Mate rial
Type of cutting

Per pkg.
Shape No. Features / Application Part No.

Wood/ Fast Ideal for fast cutting of wood
Wood/ Finish
Finish for decorative veneers B-8 4-65 4-65 - - - and plastics.Hook 75 8 HCS 5 A-85232
5 A-85628
Metal/ Basic angle:2degrees 5 A-85715
Metal/ Thin cutting 5 B-04933
For Paper, Cork, Rubber, Leather B-10 3-65 3-65 - - - For fast nish work, 75 9 HCS 2 B-01323
especially in plywood. 5 A-85759
Shape
B-19 3-50 3-50 - - Reverse tooth for splinter-free cuts.
- For tough plastics and decorative 65 12 HCS
veneers

B-19S 3-25 3-25 - - - Short type of B-19 43 12 HCS

B-22 - 1-6 1-3 1-3 1-3 For mild steel, tough plastics. 50 24 HSS
Espessialy for thin metal plate

B-24 - 1-3 1-2 0.5-2 0.5-2 For very thin metal plate 50 32 HSS

No. Foam polystyrene
Card board

Working Length
(mm)

Tooth Per Inch
Mate rial

Type of cutting
Per pkg.
Rubber Leather - Features / Application Part No.

B-K 50 30 10 5 - Ideal for cutting of paper, 75 - HCS - 5 A-80416
cork, rubber and leather.

70

Jigsaw / Reciprosawing

Recipro saw blade Teeth per Overall Blade Application Tooth Per Part No.
inch length thickness Material pkg.
Type (mm)
Super Express Recipro saw Blade (mm)

7-18 152 0.9 Fast cut for metal Bi-Metal 5 B-05038
(Iron/steel 1.5-8.0mm, Plastic 5-77mm)

Fast cut for non-ferrous metal, aluminum, plastics, B-05044
6-11 152 0.9 wood with nail, steel (Iron/steel 5-8mm, Plastic 5- Bi-Metal 5
77mm, Wood 5-77mm)

6-10 203 1.0 Fast cut for wood HCS 5 B-05153

For Metal / Basic

Type Teeth per Overall Blade Application Tooth Per Part No.
inch length thickness Material pkg. B-16841
14 (mm) metal plate 3-8mm
14 (mm) pipe 10-100mm Bi-Metal 5
18 152
18 0.9 metal plate 3-8mm
24 pipe 10-175mm
24 225 0.9 Bi-Metal 5 B-16776
10-14 For thin metal 1.5-4.0mm.
152 0.9 For iron pipe 100mm dia or less. Bi-Metal 5 B-05169
25 B-05169-25
metal plate 1.5-4mm
225 0.9 pipe 5-175mm Bi-Metal 5 B-16782

152 0.9 metal plate 0.7-3mm Bi-Metal 5 B-16835
pipe 5-100mm
225 0.9 Bi-Metal 5 B-43169
metal plate 0.7-3mm
305 0.9 pipe 5-175mm Bi-Metal 5 B-16857

metal tubing 5-200mm, Aluminum &
plastic 5-20mm

For Metal / Heavy

14+18 152 1.1 metal plate 3-8mm, pipe <100mm Bi-Metal 5 B-43131

14+18 225 1.1 metal plate 3-8mm, pipe <175mm Bi-Metal 5 B-43175

14+18 305 1.1 metal plate 3-8mm, pipe <250mm Bi-Metal 5 B-43206

8+10 152 1.1 thick sheet metal 4-12mm, pipe <100mm Bi-Metal 5 B-43147
(fast cut)

8+10 225 1.1 thick sheet metal 4-12mm, pipe <175mm Bi-Metal 5 B-43181
(fast cut)

8+10 305 1.1 thick sheet metal 4-12mm, pipe <250mm Bi-Metal 5 B-43212
(fast cut)

10-14 152 1.25 thick sheet metal 2-10mm, pipe <100mm Bi-Metal 5 B-43153
( ne cut)

10-14 225 1.25 thick sheet metal 2-10mm, pipe <175mm Bi-Metal 5 B-43197
( ne cut)

10-14 305 1.25 thick sheet metal 2-10mm, pipe <250mm Bi-Metal 5 B-43228
( ne cut)

For Metal / Heavy / Curve shape

14+18 152 1.1 metal plate 3-8mm, pipe <100mm Bi-Metal 5 B-55815

14+18 225 1.1 metal plate 3-8mm, pipe <175mm Bi-Metal 5 B-55821

14+18 305 1.1 metal plate 3-8mm, pipe <225mm Bi-Metal 5 B-55837

71

Jigsaw / Reciprosawing

Type Teeth per Overall Blade Application Tooth Per Part No.
For Metal / Heavy / TC inch length thickness Material pkg.
(mm)
(mm)

8 100 1.25 thick sheet metal 4-12mm, pipe <50mm TC/HM 1 B-55566

8 152 1.25 thick sheet metal 4-12mm, pipe <100mm TC/HM 1 B-55572

8 228 1.25 thick sheet metal 4-12mm, pipe <175mm TC/HM 1 B-55588

8 305 1.25 thick sheet metal 4-12mm, pipe <250mm TC/HM 1 B-55594

For Wood / Basic

10 150 1.0 For wood, plywood 5mm-90mm HCS 5 A-02319

10 250 1.25 For thick wood 5mm-190mm HCS 5 B-00767

For Wood / Fast 6 150 1.0 For fast nish work in wood 10mm-90mm HCS 5 792707-9
for Wood and Metal
*White Lacquered, **Unlacquered 4 150 1.0 For fast and rough cutting in thick wood. HCS 5 A-02303
20mm-90mm

6 300 1.25 For roughing work on thick wood. 10mm- HCS 5 B-03030
250mm

6 152 1.25 For wood with nails 10mm-100mm, Bi-Metal 5 B-05175
Glass Fiber 8-50mm

For pallets, wood with nails 5-100mm
10 152 0.9 sheet metal, pipes, aluminum pro les 3- Bi-Metal 5 B-31843

12mm

For pallets, wood with nails 5-175mm
10 228 0.9 sheet metal, pipes, aluminum pro les 3- Bi-Metal 5 B-31859

12mm

Wood with nails/metal, chipboards (10-250mm),
5-8 305 1.25 aerated concrete (10-250mm), plastics/Glass bre Bi-Metal 3 B-10637

reinforced plastics, pro les (5-60mm)

10-14 152 0.9 wood with metal 5-100mm, aluminum 3- Bi-Metal 5 B-43240
10mm, plastic 3-100mm

10-14 225 0.9 wood with metal 5-175mm, aluminum 3- Bi-Metal 5 B-43262
10mm, plastic 3-175mm

Type Teeth per Overall Blade Application Tooth Per Part No.
For Wood and Metal / Heavy inch length thickness Material pkg.
(mm)
(mm)

5-8 152 1.6 wood with metal, chipboard 10-100mm Bi-Metal 5 B-43234
5-8 225 1.6 wood with metal, chipboard 10-175mm Bi-Metal 5 B-43256
5-8 305 1.6 wood with metal, chipboard 10-235mm Bi-Metal 5 B-43278

72

Jigsaw / Reciprosawing

Type Teeth per Overall Blade Application Tooth Per Part No.
For Special Purpose inch length thickness Material pkg.
(mm)
(mm)

- 225 1.5 Insulation Material, Glass Wool, Stone HCS 2 B-52118
Wool (10-175mm)

- 300 1.5 Insulation Material, Glass Wool, Stone HCS 2 B-52124
Wool (10-250mm)

- 400 1.5 Insulation Material, Glass Wool, Stone HCS 1 B-52130
Wool (10-300mm)

18 152 1.0 For stainless steel plate 2mm-4mm, TC/HM 2 B-07250
stainless steel pipe 80mm dia or less, ber glass

- 228 1.0 Cast-steel pipe 150mm dia or less, for red Diamon 2 B-31871
brick 10-175mm, FRP/Epoxy 3-175mm d Grit

For Ice/Frozen Material

3 305 1.25 For Ice 10-250 mm Stainless 1 B-10609
6 228 1.2 For Ice 10-175 mm Steel 1 B-30564
10 228 1.2 For Ice 10-175 mm 1 B-30570
Stainless
Steel

Stainless
Steel

Economy type Recipro saw blade Teeth Overall Blade Application Tooth Material Per pkg. Part No.
per length thickness
Type inch (mm) (mm) metal plate 1.5-4mm
For Metal pipe 5-100mm

18 152 0.9 metal plate 1.5-4mm Bi-Metal 2 D-51633
pipe 5-175mm Bi-Metal 2 D-51661
18 225 0.9 Bi-Metal 2 D-51649
metal plate 0.7-3mm Bi-Metal 2 D-51677
24 152 0.9 pipe 5-100mm

24 225 0.9 metal plate 0.7-3mm
pipe 5-175mm

Board Cutter Blade

For Model:
DSD140, DSD180, SD100D

Blade length Blade width Blade thickness Application Tooth Material Per pkg. Part No.
(mm) HCS 2 B-49703
(mm) (mm) 0.55 Plasterboard HCS 2 B-49719
(<30mm )
55 18 0.55
Wood (<30mm )
55 18

Scroll saw blade No of teeth Pc per pkg. Part No.
per inch 5 A-31099
For model: SJ401 60 5 A-31108
Application
70 73
Straight line and large
curve on wood

Optimal switching curve
and small area on wood

Jigsaw / Reciprosawing

Band saw blade

*Wave teeth
Thickness : 0.5 mm, Length : 2,240 mm

Model No. Type Width (mm) No. of teeth per inch Application Part No.
4 Wood/ for cross-cut B-16667
16 4 Wood/ for universal B-16673
6 Wood/ for curve-cut B-16689
LB1200F Carbon steel 13 14 Nonferrous metal B-16695
(3pcs. /set) 6
6 Wood 792567-9
16 14 792560-3
18 Plastics and non-ferrous 792559-8
Width : 13 mm, Thickness : 0.5 mm, Length : 1,140 mm 24 metal.Mild steel, 792558-0
14 792557-2
DPB180, 2106, Carbon steel More than 5 mm 18 cast steel and cast iron. 792556-4
2107F, 2107FW (3pcs. /set) 4 mm- 5 mm 24 *194692-6
Plastics and non-ferrous metal.
Bi-Metal Less than 4 mm 14 Mild steel, cast steel *B-40543
(1pc.) 18 *B-40559
More than 5 mm and cast iron. Hard steel and
stainless steel.
4 mm- 5 mm
Plastics and non-ferrous metal.
Less than 4 mm Mild steel, cast steel and cast iron.

Width : 13 mm, Thickness : 0.5 mm, Length : 835 mm Hard steel and stainless steel.

DPB181 Bi-Metal 3mm-6 mm
(5pc.) 2 mm- 3 mm

74

ACCESSORIES

Brushing

75

Brushing Wire brush wheel 120

Wire brush (For rust removal)
For Model: 9741
For Model:
A: 100mm Disc / Angle Grinder Part No.
B: 125, 150mm Angle Grinder 794382-7
C: 180, 230mm Angle Grinder
D: 230mm Angle Grinder

Wire Cup brush, Crimped wire Nylon brush wheel

0.3mm crimped steel wire For Model: 9741
(Ideal for light rust removal from at surfaces and edges.)

For Model Size Spindle thread Part No. Application Part No.

A 60mm M10 x 1.5 D-24066 120-80 Coarse 794384-3
B 60mm M14 x 2 D-24072 120-100 Medium 794379-6
A 75mm M10 x 1.5 D-24088 794383-5
B 75mm M14 x 2 D-24094 120-240 Fine
C 100mm M14 x 2 D-29284

Wire Cup brush, Knotted wire

0.5mm knotted steel wire1
(Ideal for heavy work for fast cleaning of large surface.)

For Model Size Spindle thread Part No.

A 60mm M10 x 1.5 D-24103
B 60mm M14 x 2 D-24119
A 75mm M10 x 1.5 D-24125
B 75mm M14 x 2 D-24131

Wire Cup brush, Knotted wire 2

0.5mm knotted steel wire2
(Ideal for especially heavy work. Knotted steel wire
is twisted more stronger than 1. )

For Model Size Spindle thread Part No.

A 60mm M10 x 1.5 D-24147
B 60mm M14 x 2 D-24153
C 100mm M14 x 2 D-29290

Wire wheel brush, Knotted wire

0.5mm knotted steel wire
(E ective for heavy duty cleaning at spot.)

For Model Size Spindle thread Part No.

B, C 100mm M14 x 2 D-29555
B, C 115mm M14 x 2 D-29561
B, C 125mm M14 x 2 D-29577
D 175mm M14 x 2 D-45777

76

ACCESSORIES

Bonded Abrasive

Long life Flexible Always use back up pad

77

Bonded Abrasive Cutting

Types of Wheels

Grinding

Grinding wheel Thin cut-off wheel (Flat)
Diameter 100mm~230mm
Diameter 100mm~230mm Thickness: 0.8mm~2.0mm
Thickness: 6.0mm~7.2mm
Diameter 100mm~230mm
Flexible grinding wheelThin cut-off wheel (Depressed) Thickness: 0.8mm~2.0mm

Diameter 100mm~230mm Cut-off wheel (Flat)
Thickness: 2.0mm~4.0mm Diameter 100mm~230mm
Thickness: 2.0mm~3.0mm
*ALWAYS USE BACK-UP PAD
Cut-off wheel (Depressed)
Cut-off wheel
for portable cut-off

Diameter 100mm~230mm
Thickness: 3.0mm

Diameter 305mm~405mm
Thickness: 2.4mm~3.0mm

78

Bonded Abrasive

Abrasive Disc

Validity Pictograms for safety use
Spec
Part number
Size Application
Max operating speed Color code
Standard
Blue: Metal
How to read the spec. Gold: INOX
Green: Masonry
Aluminum Oxide Group Silver: Aluminum
Brown Fused Aluminum A
Single Aluminum Oxide SA
White Aluminum Oxide WA Alumina Zirconium Z

Silicon Oxide Group Green Silicon Carbide CG
Black Silicon Carbide C

Grit Size 24 36 60 80 120

Coarse Fine

Hardness of grinding wheel Very Soft Soft Middle Hard Very Hard
A-G H-K L-O
Closer to A, softer grinding wheel is P-S T-Z
Closer to Z, harder grinding wheel is

Soft grinding wheel Hard work piece
Hard grinding wheel Soft work piece

Type of Bond

BF : Reinforced resinoid bond
V : Vitri ed bond

79

Abrasive Disc Series for Cordless Angle Grinder

The combination of new Grinding Wheel series and DC
Grinder increases the work amount by 1 charge dramatically!

Flexible 2in1 abrasive 0.8mm thin
grinding wheel wheel cutting wheel

Grinding Cutting Cutting
+ Deburring

Feature of DC series

1. E ciency is high so shortens a working time!
It is decreased in the time for impossible posture, and fatigue to a body decreases.

2. Amount of grinding per 1 charged battery is up!!
Reduce charge number of times in the job site.

Flexible grinding wheel

Feature 2. Less tapping & Less vibration

1. Ideal for cordless tools

Small Work amount / per 1 charge Large

Normal 100 70%

up

Flexible 170 60%Vibration

0 50 100 150 200 DOWN

Note:

1. The test results depend to a great extent on the hardness of materials, etc.

2. The grinder amount bar graphs are relative values when the capacity of

Makita Grinding wheel (Thickness:6.0mm) is indexed at 100.

80

2 in 1 abrasive wheel

Features

1. Ideal for cordless tools

Small Work amount (Cutting) / Large Suitable for cutting & deburring
Current 2in1 per 1 charge
2. Cutting and Deburring are possible in one disc
80%
100 Cutting Deburring
up

180

New 2in1

0 50 100 150 200

Note:
1. The test results depend to a great extent on the hardness of materials, etc.
2. The numbers in the bar graphs are relative values when the capacity of

Makita Current 2in wheel (Thickness:3.2mm) is indexed at 100.

Thin 0.8mm cutting wheel 0.8mm 2.5mm

2. Less burr of materials

3. Less dust of materials 0.8mm 2.5mm

Features

1. Ideal for cordless tools

(A work load per 1 charge improves.)

Small Work amount / per 1 charge Large

1.0mm 100 20%

up

120

0.8mm

0 50 100 150

Note:
1. The test results depend to a great extent on the hardness of materials, etc.
2. The numbers in the bar graphs are relative values when the capacity of

Makita Cut-o wheel (Thickness:1.0mm) is indexed at 100.

81

2.5mm thickness double reinforced abrasive cut-off wheel

Features 2. Less burred

1. Thinner

3.0mm 2.5mm

New 2.5mm thickness Current 3.0mm thickness

3. Long life 4. Fast cut

Thanks to thin thickness, this item is fast cut. Thanks to new material, double reinforced, this item is long life.

*This gure show life of cut-o wheel *This gure show cutting speed

New 2.5mm 200% New 2.5mm 120%
thickness thickness

Current 3.0mm 100% Current 3.0mm 100%
thickness thickness

82

Bonded Abrasive

Grinding wheel

Three-star range

Three-star range Grit Per pkg. Part No. Size Grit Per pkg. Part No.
A36P 1 A-80911(EN) (mm)
Size A36P 1 B-46246 (EN) 100 x 6 x 16 A24R 1 B-21107(EN)
(mm) A36P 1 180 x 6 x 22.23 A24R 1 B-21135(EN)
100 x 6 x 16 A36P 1 741458-1
100 x 6 x 16 A36P 1 A-80927(EN) Flexible grinding wheel
115 x 6 x 22.23 A36P 1 A-80933(EN)
115 x 6 x 22.23 A24P 1 A-84981(EN) Always use back-up pad
125 x 6 x 22.23 A36P 1 Three-star range
150 x 6 x 22.23 A36P 1 741425-6
180 x 6 x 22.23 A36P 1 741426-4 Size Grit Per pkg. Part No.
180 x 6 x 22.23 A-80949(EN) (mm)
180 x 6 x 22.23 Grit Per pkg. A-80955(EN) 100 x 2 x 16 AC46 1 B-18203
230 x 6 x 22.23 A24R 1 100 x 2 x 16 AC60 1 A-85139
A24R 1 Part No. 100 x 2 x 16 AC80 1 B-18219
Two-star range A24R 1 D-18443(EN) 100 x 2 x 16 AC120 1 B-18225
A24R 1 D-18459(EN) 100 x 3 x 16 AC36 1 B-18231
Size A24R 1 D-18465(EN) 100 x 3 x 16 AC46 1 B-18247
(mm) D-18471(EN) 100 x 3 x 16 AC60 1 B-18253
100 x 6 x 16 D-18487(EN) 100 x 3 x 16 AC80 1 B-18269
115 x 6 x 22.23 115 x 3 x 22.23 AC36 1 B-18275(EN)
125 x 6 x 22.23 Part No. 115 x 3 x 22.23 AC46 1 B-18281(EN)
180 x 6 x 22.23 A-80852(EN) 115 x 3 x 22.23 AC60 1 B-18297(EN)
230 x 6 x 22.23 B-46349 (EN) 115 x 3 x 22.23 AC80 1 B-18306(EN)
A-80874(EN) 125 x 3 x 22.23 AC36 1 B-18312(EN)
Three-star range Grit Per pkg. B-46361 (EN) 125 x 3 x 22.23 AC46 1 B-18328(EN)
A-80880(EN) 125 x 3 x 22.23 AC60 1 B-18334(EN)
Size WA36N 1 B-46377 (EN) 125 x 3 x 22.23 AC80 1 B-18340(EN)
(mm) WA36N 1 A-80896(EN) 180 x 3 x 22.23 AC36 1 B-18356
100 x 6 x 16 WA36N 1 B-46383 (EN) 180 x 3 x 22.23 AC46 1 B-18362
100 x 6 x 16 WA36N 1 180 x 3 x 22.23 AC60 1 A-88490
125 x 6 x 22.23 WA36O 1 180 x 3 x 22.23 AC80 1 B-18378
125 x 6 x 22.23 WA36O 1 230 x 3 x 22.23 AC36 1 B-18384
180 x 6 x 22.23 WA36O 1 230 x 3 x 22.23 AC46 1 B-18390
180 x 6 x 22.23 WA36O 1 230 x 3 x 22.23 AC60 1 B-18409
230 x 6 x 22.23 230 x 3 x 22.23 AC80 1 B-18415
230 x 6 x 22.23

Two-star range Grit Per pkg. Part No.

Size C24R 1 D-18493(EN)
(mm) C24R 1 D-18502(EN)
100 x 6 x 16 C24R 1 D-18518(EN)
115 x 6 x 22.23 C24R 1 D-18524(EN)
125 x 6 x 22.23 C24R 1 D-18530(EN)
150 x 6 x 22.23 C24R 1 D-18546(EN)
180 x 6 x 22.23
230 x 6 x 22.23

83

Bonded Abrasive

Back up pad for Flexible grinding wheel

Always use back-up pad
Three-star range

Size Grit Per pkg. Part No. Size Per pkg. Part No.
(mm)
100 x 2 x 16 WA46 1 B-18421 for 100mm 1 B-20476
100 x 2 x 16 WA60 1 B-18437 for 115/125mm 1 B-20482
100 x 2 x 16 WA80 1 B-18443 1 B-20498
100 x 2 x 16 WA120 1 B-18459 for 180mm 1 B-20507
100 x 3 x 16 WA36 1 B-18465 for 230mm
100 x 3 x 16 WA46 1 B-18471
100 x 3 x 16 WA60 1 B-18487 Thin Cut-off wheel
100 x 3 x 16 WA80 1 B-18493
115 x 3 x 22.23 WA36 1 B-18502(EN) Three-star range
115 x 3 x 22.23 WA46 1 B-18518(EN)
115 x 3 x 22.23 WA60 1 B-18524(EN) Size (mm) Grit Type Per pkg. Part No.
115 x 3 x 22.23 WA80 1 B-18530(EN)
125 x 3 x 22.23 WA36 1 B-18546(EN) 100 x 1.0 x 16 A60T A 1 B-12201(EN)
125 x 3 x 22.23 WA46 1 B-18552(EN) 115 x 1.0 x 22.23 A60T A 1 B-12217(EN)
125 x 3 x 22.23 WA60 1 B-18568(EN) 125 x 1.0 x 22.23 A60T A 1 B-12239(EN)
125 x 3 x 22.23 WA80 1 B-18574(EN) 150 x 1.6 x 22.23 A60T A 1 B-12251(EN)
180 x 3 x 22.23 WA36 1 B-18580 180 x 1.6 x 22.23 A60T A 1 B-12267(EN)
180 x 3 x 22.23 WA46 1 B-18596 230 x 1.9 x 22.23 A60T A 1 B-12273(EN)
180 x 3 x 22.23 WA60 1 B-18605
180 x 3 x 22.23 WA80 1 B-18611 Two-star range
230 x 3 x 22.23 WA36 1 B-18627
230 x 3 x 22.23 WA46 1 B-18633
230 x 3 x 22.23 WA60 1 B-18649
230 x 3 x 22.23 WA80 1 B-18655

Always use back-up pad Size (mm) Grit Type Per pkg. Part No.
Three-star range
100 x 1.0 x 16 WA60T A 1 D-18758(EN)
Size Grit Per pkg. Part No. 115 x 1.2 x 22.23 WA60T A 1 D-18764(EN)
(mm) WA36P 1 B-52392 (EN) 125 x 1.2 x 22.23 WA60T A 1 D-18770(EN)
100 x 4 x 16
125 x 1.2 x 22.23 WA60T A 10 (Can) D-18770-
Flexible grinding wheel ideal for cordless angle grinder 10(EN)
180 x 2 x 22.23 WA36R A 1 D-18786(EN)
230 x 2 x 22.23 WA36R A 1 D-18792(EN)
100 x 1.2 x 16 WA60T B 1 D-18801(EN)
115 x 1.2 x 22.23 WA60T B 1 D-18817(EN)
125 x 1.6 x 22.23 WA46S B 1 D-18823(EN)
180 x 2 x 22.23 WA36R B 1 D-18839(EN)
230 x 2 x 22.23 WA36R B 1 D-18845(EN)

Needless to use Back up pad
Four-star range

Size Grit Per pkg. Part No.
(mm) WA36P 1 B-52392(EN)
100×4.0×16

84

Bonded Abrasive 2in1 grinding wheel ideal for Cordless Angle Grinder

Cut-off wheel

Three-star range

Type A: Flat wheel
Type B: Depressed center wheel

Size (mm) Grit Type Per pkg. Part No. Appropriate wheel cover is required
A Four-star range
100 x 2.0 x 16 A46S A 1 A-85123(EN)
100 x 2.5 x 16 A30R A 1 A-85298(EN) Size Grit Per pkg. Part No.
100 x 2.5 x 16 A30R A 1 B-46399 (EN) (mm)
125 x 2.5 x 22.23 A30R A 1 A-85313(EN) 100×2.2×16 SA46P 1 B-51649 (EN)
180 x 2.5 x 22.23 A30R A 1 A-85329(EN) 125×2.2×22.23 SA46P 1 B-51655 (EN)
180 x 2.5 x 22.23 A30R A 1 B-46420 (EN)
230 x 2.5 x 22.23 A30R A 1 A-85335(EN) Abrasive cut-off wheel for portable cut-off
230 x 2.5 x 22.23 A30R B 1 B-46436 (EN)
100 x 3 x 16 A30T B 1 A-83587(EN) Four-star range
115 x 3 x 22.23 A30T B 1 A-83593(EN)
125 x 3 x 22.23 A30T B 1 A-83602(EN)
180 x 3 x 22.23 A30T B 1 A-83618(EN)
230 x 3 x 22.23 A30T 1 A-83624(EN)
Type
Two-star range A Size Grit Rough or G.F.Q'ty Per pkg. Part No.
A (mm) A36P Smooth 2.0G 1 B-49448
A 355x2.5x25.4
A -
A
Size (mm) Grit A Per pkg. Part No. Three-star range
B
100 x 2.5 x 16 A30S B 1 D-18655(EN) Size Grit Rough or G.F.Q'ty Per pkg. Part No.
115 x 2.5 x 22.23 A30S B 1 D-18661(EN) (mm) Smooth
125 x 2.5 x 22.23 A30S B 1 D-18677(EN) 305x2.8x25.4 A36P Rough 1.0G 5 A-01345
150 x 2.5 x 22.23 A30S B 1 D-29402(EN) 305x2.8x25.4 A36P Rough 1.0G 25 A-05038
180 x 2.5 x 22.23 A30S B 1 D-18683(EN) 355x3x25.4 A30Q Rough 1.0G 25 B-20775-25
230 x 2.5 x 22.23 A30S 1 D-18699(EN) 355x3x25.4 A36P Rough 1.0G 5 A-01351
A30S 1 D-18552(EN) 355x3x25.4 A36P Rough 1.0G 25 A-05044
100 x 3 x 16 A30S 1 D-18568(EN) 355x3x25.4 A36P Rough 1.0G 5 B-10730-5
115 x 3 x 22.23 A30S 1 D-18574(EN) 355x3x25.4 A36P Rough 1.0G 25 B-10730-25
125 x 3 x 22.23 A30S 1 D-29418(EN) 355x3x25.4 A36P Smooth 1.0G 1 A-89545
150 x 3 x 22.23 A30S 1 D-18580(EN) 405x3x25.4 A36P Rough 1.0G 5 A-01367
180 x 3 x 22.23 A30S 1 D-18596(EN) 405x3x25.4 A36P Rough 1.0G 25 A-05050
230 x 3 x 22.23 405x3x25.4 A36P Rough 1.0G 25 A-88478-25

Two-star range Grit Type Per pkg. Part No.

Size (mm) C30S A 1 D-18708(EN)
100 x 3 x 16 C30S A 1 D-18714(EN)
115 x 3 x 22.23 C30S A 1 D-18720(EN)
125 x 3 x 22.23 C30S A 1 D-18736(EN)
180 x 3 x 22.23 C30S A 1 D-18742(EN)
230 x 3 x 22.23 C30S B 1 D-18605(EN)
100 x 3 x 16 C30S B 1 D-18611(EN)
115 x 3 x 22.23 C30S B 1 D-18627(EN)
125 x 3 x 22.23 C30S B 1 D-18633(EN)
180 x 3 x 22.23 C30S B 1 D-18649(EN)
230 x 3 x 22.23

85

Bonded Abrasive Wheel point

Abrasive cut-off wheel for angle cutter #4112H, 4112HS Application:
A: Mild steel, carbon steel, etc.
For cutting masonry materials, concrete, marble, slate, etc. WA: Hardened and special steels.

Application Size(mm) G.F.Q'ty Per pkg. Part No.
Brick 305x3.5x25.4 2.0G 25 A-89735

No. per pkg. Wheel dia. Shank Type Part No.
(mm) size (mm)
794050-2
For Model: 794052-8
903, 906, GD0800C, GD0810C, GD0600, DGD800, DGD801 794053-6
794054-4
1 10 5 3A 794055-2
1 10 8 3A 794057-8
1 10 10 3A 794059-4
2 10 5 3 WA
2 10 6 3 WA 741614-3
2 10 10 3 WA 741617-7
3 10 10 3A 741615-1
741616-9
For Model:
906, GD0800C, GD0810C, GD0600, DGD800, DGD801

11 19 6 WA
11 19 1/4'' WA
41 19
41 19 6 WA
1/4'' WA

Grinding wheel for Bench grinder

Size Grit Part No.

150 x 16 x 12.7 A36M B-51904 (EN)
150 x 16 x 12.7 WA60K A-47210
150 x 16 x 12.7 GC120H
150 x 6.4 x 12.7 A60M B-51932 (EN)
205 x 19 x 15.88 WA60K A-47195
205 x 19 x 15.88 GC120H A-47260

B-51976 (EN)

Grinding wheel for Straight grinder

Size Grit Part No.
741015-5
125 x 19 x 12.7 24P 741016-3
125 x 19 x 12.7 36P
86

ACCESSORIES

Coated Abrasive

Hook & Loop backing Grit size Sanding wood Sanding wood
Sanding wood Sanding paint
Sanding plastic Sanding wood, large Sanding paint Sanding metal
Polishing surfaces Ceramic
Removing paint Removing paint from
metal or polishing
Wood, hard and soft Stairs

87

Coated Abrasive Application
Large pictogram indicates
Flap Disc recommended application
Grain type/ Grit size
Size
Part number
Pictograms for
safety use
Standard

Max operating speed

Backing Type Shape Type

Fiber glass backing Nylon backing Flat Angled

Standard backing type For heavy duty

Material chart Recommended Acceptable
Description of
Grit material Aluminum oxide Zirconia alumina Silicon carbide Ceramic
aluminum oxide
Description of
label color Best for metal Best for INOX and metal Best for Masonry Best for INOX, metal
and non-ferrous
metal

Wood
Plastic
Metal
No ferrous
INOX
Masonry

88

Coated Abrasive

Flap Disc

Industrial Flap Disc for Heavy Duty

Feature E ciency 100
Life 140
High e ciency 0
Long life 100
Suitable for Industry use 152

High-speed Grinding with high-power grinder. 50 100 150

Flexible Flap Disc

Feature Suitable for grinding on CURVE/EDGE/CORNER surface.
89
High flexibility

Coated Abrasive Backing Type Backing Dia. Hole dia. Grit Part No.
Shape (mm) (mm)
Flexible Flap Disc 100 16 Z36 D-27573
Material: Aluminum oxide 115 16 Z40 D-27589
125 16 Z60 D-27595
High exibility. Suitable for grinding on CURVE/EDGE/CORNER surface. 180 16 Z80 D-27604
100 16 Z120 D-27610
Application Best Fiber Glass Flat 115 22.23 Z36 D-27626
125 22.23 Z40 D-27632
Better 180 22.23 Z60 D-27648
22.23 Z80 D-27654
PLASTIC 22.23 Z120 D-27660
22.23 Z36 D-27676
Backing Type Shape Dia. Hole dia. Grit Part No. 22.23 Z40 D-27682
Backing less Flat (mm) (mm) 22.23 Z60 D-27698
100 16 A40 D-62686 22.23 Z80 D-27707
16 A60 D-62692 22.23 Z120 D-27713
16 A80 D-62701 22.23 Z36 D-27729
16 A120 D-62717 22.23 Z40 D-27735
22.23 Z60 D-27741
Flap Disc series 22.23 Z80 D-27757
Material: Zirconia aluminum 22.23 Z120 D-27763
16 Z36 D-27779
Application Best Nylon Flat 16 Z40 D-27785
Better 16 Z60 D-27791
16 Z80 D-27800
Backing Type Backing Dia. Hole dia. Grit Part No. 16 Z120 D-27816
Shape (mm) (mm) 22.23 Z36 D-27822
100 16 Z36 D-27377 22.23 Z40 D-27838
115 16 Z40 D-27383 22.23 Z60 D-27844
125 16 Z60 D-27399 22.23 Z80 D-27850
180 16 Z80 D-27408 22.23 Z120 D-27866
16 Z120 D-27414 22.23 Z36 D-27872
22.23 Z36 D-27420 22.23 Z40 D-27888
22.23 Z40 D-27436 22.23 Z60 D-27894
22.23 Z60 D-27442 22.23 Z80 D-27903
22.23 Z80 D-27458 22.23 Z120 D-27919
22.23 Z120 D-27464 22.23 Z36 D-27925
22.23 Z36 D-27470 22.23 Z40 D-27931
22.23 Z40 D-27486 22.23 Z60 D-27947
22.23 Z60 D-27492 22.23 Z80 D-27953
22.23 Z80 D-27501 22.23 Z120 D-27969
22.23 Z120 D-27517
Fiber Glass Angled 22.23 Z36 D-27523
22.23 Z40 D-27539
22.23 Z60 D-27545
22.23 Z80 D-27551
22.23 Z120 D-27567

90

Coated Abrasive Material: Ceramic aluminum oxide

Material: Aluminum oxide

Application Best Application Best

Better Backing Type Backing Dia. Hole dia. Grit Part No.
Shape (mm) (mm)
100 16 Ce40 D-28254
PLASTIC Backing Dia. Hole dia. Grit Part No. 115 16 Ce60 D-28260
Shape (mm) (mm) 125 16 Ce80 D-28276
Backing Type 100 16 A36 D-26973 180 16 Ce120 D-28282
115 16 A40 D-26989 100 22.23 Ce40 D-28298
125 16 A60 D-26995 Fiber Glass Angled 115 22.23 Ce60 D-28307
180 16 A80 D-27006 125 22.23 Ce80 D-28313
Fiber Glass Angled 100 16 A120 D-27012 180 22.23 Ce120 D-28329
115 22.23 A36 D-27028 22.23 Ce40 D-28335
125 22.23 A40 D-27034 Fiber Glass Flat 22.23 Ce60 D-28341
180 22.23 A60 D-27040 22.23 Ce80 D-28357
Fiber Glass Flat 22.23 A80 D-27056 22.23 Ce120 D-28363
22.23 A120 D-27062 22.23 Ce40 D-28379
22.23 A36 D-27078 22.23 Ce60 D-28385
22.23 A40 D-27084 22.23 Ce80 D-28391
22.23 A60 D-27090 22.23 Ce120 D-28400
22.23 A80 D-27109 16 Ce40 D-28416
22.23 A120 D-27115 16 Ce60 D-28422
22.23 A36 D-27121 16 Ce80 D-28438
22.23 A40 D-27137 16 Ce120 D-28444
22.23 A60 D-27143 22.23 Ce40 D-28450
22.23 A80 D-27159 22.23 Ce60 D-28466
22.23 A120 D-27165 22.23 Ce80 D-28472
16 A36 D-27171 22.23 Ce120 D-28488
16 A40 D-27187 22.23 Ce40 D-28494
16 A60 D-27193 22.23 Ce60 D-28503
16 A80 D-27202 22.23 Ce80 D-28519
16 A120 D-27218 22.23 Ce120 D-28525
22.23 A36 D-27224 22.23 Ce40 D-28531
22.23 A40 D-27230 22.23 Ce60 D-28547
22.23 A60 D-27246 22.23 Ce80 D-28553
22.23 A80 D-27252 22.23 Ce120 D-28569
22.23 A120 D-27268
22.23 A36 D-27274
22.23 A40 D-27280
22.23 A60 D-27296
22.23 A80 D-27305
22.23 A120 D-27311
22.23 A36 D-27327
22.23 A40 D-27333
22.23 A60 D-27349
22.23 A80 D-27355
22.23 A120 D-27361

91

Coated Abrasive Flap Disc Economy type
Material: Zirconia aluminum
Material: Silicon carbide
More Economy Type
Application Best
Application Best
Backing Type Backing Dia. Hole dia. Grit Part No.
Shape (mm) (mm) Better
100 16 C36 D-27975
115 16 C40 D-27981 Backing Type Backing Dia. Hole dia. Grit Part No.
125 16 C60 D-27997 Shape (mm) (mm)
180 16 C80 D-28008 100 16 Z40 D-63703
Fiber Glass Flat 115 16 C120 D-28014 125 16 Z60 D-63719
180 22.23 C36 D-28020 180 16 Z80 D-63725
22.23 C40 D-28036 Fiber Glass Angled 16 Z120 D-63731
22.23 C60 D-28042 22.23 Z40 D-63781
22.23 C80 D-28058 22.23 Z60 D-63797
22.23 C120 D-28064 22.23 Z80 D-63806
22.23 C36 D-28070 22.23 Z120 D-63812
22.23 C40 D-28086 22.23 Z40 D-63828
22.23 C60 D-28092 22.23 Z60 D-63834
22.23 C80 D-28101 22.23 Z80 D-63840
22.23 C120 D-28117 22.23 Z120 D-63856
22.23 C36 D-28123
22.23 C40 D-28139 Flap Disc Economy type
22.23 C60 D-28145 Material: Aluminum oxide
22.23 C80 D-28151
Nylon Flat 22.23 C120 D-28167
22.23 C80 D-28173
22.23 C120 D-28189 Application Best
22.23 C180 D-28195
22.23 C320 D-28204
22.23 C80 D-28210
22.23 C120 D-28226
22.23 C180 D-28232
22.23 C320 D-28248

Better

Multi-disc PLASTIC Backing Dia. Hole dia. Grit Part No.
Shape (mm) (mm)
For grinding, sanding and Backing Type 100 16 A40 D-63395
polishing concrete, marble and stone. 125 16 A60 D-63404
180 16 A80 D-63410
Diameter Hole dia Grit Part No. Fiber Glass Angled 16 A120 D-63426
(mm) (mm) 22.23 A40 D-63476
100 16 C24 A-90130 22.23 A60 D-63482
115 22.23 C24 A-90249 22.23 A80 D-63498
22.23 A120 D-63507
22.23 A40 D-63513
22.23 A60 D-63529
22.23 A80 D-63535
22.23 A120 D-63541

92

Coated Abrasive

Strip Disc

Structure Special tool for stripping work
Features
Grit (SiC)

It is covered with glue with Sic (Silicon Carbide), so it
enables you to grind quickly with less power.

Fiber

from grinding too much and scratching steel.

Strip disc Flap Wheel Grinding Wheel
Application

*Removing Paint *Removing Rust *Removing blue weld discoloration

93

Coated Abrasive Fiber sanding disc

Strip Disc Use with backing pad.

Removing Paint, Removing Rust, Removing blue weld discoloration

*For stone (wet), For Model: PK5001C, PK5011C only

**For Model: GV6010 only

Color Type Speed Life Diameter Grit Per pkg. Part No.
(mm)
Black 115 C24 10 794104-5
125 C30 10 794105-3
Standard 100% 100% 125 C50 10 794106-1
125 C80 10 794107-9
Purple 150 C120 10 794108-7
150 A50 5 794319-4
Long life 94% 130% A80 5 794320-9
150 A120 5 794321-7
Strip Disc *C24 10 B-14526
*C60 10 B-14548
Application Best *C120 10 B-14554
C24 10 794096-8
Colour Backing Dia. Hole dia. Part No. C30 10 794097-6
Black Type (mm) (mm) C50 10 794098-4
100 16 B-28961 C80 10 794099-2
Fiber Glass 115 22.23 B-28977 C120 10 794100-3
125 22.23 B-28983 **C50 10 794086-1
180 22.23 B-28999 **C80 10 794088-7
**C120 10 794090-0
Surface Conditioning Flap Disc series C24 10 794070-6
C30 10 794071-4
C50 10 794072-2
C80 10 794073-0
C100 10 794219-8
C120 10 794074-8
C16 10 794091-8
C20 10 794092-6
C24 10 794093-4
C30 10 794218-0
C50 10 794094-2
C80 10 794095-0
C100 10 794220-3
C120 10 794221-1

Backing Type Backing Dia. Hole dia. Grit Part No.
Fiber Glass Shape (mm) (mm)
Angled 100 B-40711
16 Coarse B-40727
100 B-40733
16 Medium B-40749
B-40870
16 Fine B-40886
B-40892
16 Very Fine B-40901

Fiber Glass Flat 16 Coarse

16 Medium

16 Fine

16 Very Fine

94

Coated Abrasive Abrasive disc

Abrasive disc Sanding arm Assembly
For Model: 9032
(hook & loop type) 6mm: 125157-7, 9mm: 125158-5, 13mm: 125159-3

Disc dia. Grit Per pkg. Part No.
(mm)

Pre-punched (8 hole) for Paint Belt Size Grit Per pkg. Part No.
For Model: (mm)
BO5030, BO5031, BO5040, BO5041 A40 10 A-34512
*Additional coat For Model: A60 10 A-34528
9032 A80 10 A-34534
125 *WA80 10 794543-9 A100 10 A-34540
*WA120 10 794544-7 6 x 533 A120 10 A-34556
A40 10 A-34447
Pre-punched (9 hole) for Paint 10 794607-9 9 x 533 A60 10 A-34453
For Model: 10 794608-7 A80 10 A-34469
BO6030, BO6040 10 794609-5 13 x 533 A100 10 A-34475
*Additional coat 10 794610-0 For Model: A120 10 A-34481
10 794611-8 9902, 9903 A40 10 A-34562
*WA40 10 794612-6 A60 10 A-34578
10 794613-4 76 x 533 A80 10 A-34584
*WA60 For Model: A100 10 A-34590
10 D-54586 9920, 9924DB A120 10 A-34609
*WA80 10 D-54592
10 D-54601 76 x 610 WA40 10 794119-2
150 *WA120 10 D-54617 For Model: WA60 10 794120-7
10 D-54623 9401, 9402, 9403, 9404 WA80 10 794121-5
*WA180 10 D-54639 WA100 10 794122-3
10 D-54645 100 x 610 WA120 10 794123-1
*WA240 10 D-54651 WA150 10 794124-9
10 D-54667 WA180 10 794225-3
*WA400 WA240 10 794125-7

Pre-punched (15 hole) for Wood WA40 10 794237-6
For Model: WA60 10 794238-4
BO6030, BO6040, BO6050 WA80 10 794239-2
WA100 10 794240-7
A40 WA120 10 794241-5
A60 WA150 10 794242-3
A80 WA180 10 794243-1
A100 WA240 10 794244-9
150 A120
A150 WA40 5 794133-8
A180 WA60 5 794134-6
A240 WA80 5 794135-4
A320 WA100 5 794136-2
WA120 5 794137-0
WA150 5 794138-8
WA180 5 794222-9
WA240 5 794139-6

95

Coated Abrasive Wool bonnet

Abrasive paper 230mm x 280mm (9" x 11")
How to use

Model No. Size Part No.
PV7001C, PV7000C, 9207SPB, (mm) 794176-0
9218PB/L, 9227C/B, SA7000C 180

1/2 sheet 1/3 sheet 1/4 sheet Felt Pad

(hook & loop type)
(For removing wax)

*When use 100mm size felt pad, use suitable pad for PO5000C

BO4900 etc BO3710 etc BO4555 etc Model No. Disc dia. Part No.
(mm) 197916-9
Waterproof Abrasive paper (9" x 11") PO5000C 100 196152-4
DBO180, DBO140, BO5031, BO5041, 193288-0
One-star range 125
PO5000C
BO6030, BO6050, PO6000C 150

Sponge pad

(Hook & loop type)

For Model
All Finishing Sander, Handsanding:
In case of these items are used with power tools, dry use only.

Paper Size Grit Per pkg. Part No. *When use 100mm size sponge, use suitable pad for PO5000C
(mm) 1200 50 D-56867

230 x 280

Wool Pad Model No. Size Part No.
(mm) 197912-7
(hook & loop type PO5000C 100 794558-6
(For high gloss polishing) ) DBO180, DBO140, BO5031, BO5041, 125 197914-3
150
PO5000C 193470-1
BO6030, PO6000C, BO6050 190
(Use with Backing pad)
9227C/CB, 9237C/CB, PV7001/C,

PV7000C

*When use 100mm size wool pad, use suitable pad for PO5000C

Model No. Disc dia. Part No. Sponge pad
(mm) 197918-5
PO5000C 100 197920-8 (Hook & loop type)
PO5000C 125 794619-2
BO6030, BO6050, PO6000C 150 794560-9
DBO180, DBO140, BO503, 140
BO5041 192629-7
(Use with Backing pad and Sleeve18) 180
9227C/B, 9237C/CB, PV7001/C,
PV7000C, SA7000C

96

Coated Abrasive Rubber pad

Color & Application Coarse Use with pre-punched abrasive disc.

Color: Orange Model No. Size Type Part No.
Use: Suitable for taking small scratches
BO6050 150mm Hard (For coarse sanding) 197315-5
Middle BO5030, BO5031, 150mm Soft (For general sanding) 197314-7
BO5040, BO5041 150mm Super Sof (For ne sanding) 197316-3
Color: Blue 130mm 197317-1
Use: Suitable for nishing PO5000C, Hard (For polishing)
PO6000C 123mm 743081-8
Fine -
100mm 197926-6
Color: Black 125mm - 197923-2
Use: Suitable for wax coating 150mm - 197929-0
-
Sponge type
Backing pad
Flat
Feature: Full contact surface (Hook & loop type)
Use: Suitable for large, at, panel (Use with Wool pad and Sleeve18 or Sponge pad)

Sponge type Model No. Spindle thread Part No.
9227C/B, PV7001/C, PV7000C,
Wave M14 x 2 (DIN) 743053-3
Feature: Air ow between the pad and the paint. SA7000C M16 743054-1
Use: Suitable for bumper made with resin.

100mm Diamond polishing pad

(Hook & loop type)
8 pads assortment (1 each) D-15805

For Model:
PO5000C, PO6000C
*When use 100mm size sponge, use suitable pad for PO5000C

Type Size Application Part No. For Model: Grit Part No.
Flat 100mm PW5000C, PW5001C
125mm Coarse (Orange) D-62505 50 D-15584
Wave 150mm Middle (Blue) D-62533 Color 100 D-15590
100mm Fine (Black) D-62561 200 D-15609
125mm D-62511 Blue 400 D-15615
150mm Coarse (Orange) D-62549 Yellow 800 D-15621
Middle (Blue) D-62577 Orange 1500 D-15637
Fine (Black) D-62527 3000 D-15643
D-62555 Red Bu (Finishing) D-15659
Coarse (Orange) D-62583 Dark green
Middle (Blue) D-62599 Light green
Fine (Black) D-62620
D-62658 Brown
Coarse (Orange) D-62608 Green
Middle (Blue) D-62636
Fine (Black) D-62664
D-62614
Coarse (Orange) D-62642
Middle (Blue) D-62670
Fine (Black)

Coarse (Orange)
Middle (Blue)
Fine (Black)

97

ACCESSORIES

Multi Tool

Tungsten carbide grit, #30 Tungsten carbide grit, #30 40 Diamond grit, #40 Serrated edge
Sharp blade Sharp blade Delta plate Sanding plate

98

Multi Tool Segment saw blade 85

Sawing TMA006

For Model:
DTM51, DTM50, DTM41, DTM40,
TM3010C, TM3000C
Size: W= width (mm), L=length (mm)

Application/ Recommended Use
Wood&Metal/ Suitable for ush cutting
Cut-o door frame to length on the oor
Cut-out parquet/laminate ooring
Cut-o smaller mouldings to length

Segment saw blade 85 Diameter Type Part No.
(mm) BiM, Wood & Metal, o set B-21325
TMA001 85

Application/ Recommended Use Segment saw blade 100
Non-ferrous metal, FRP, PVC / Suitable for corners.
Plunge cut in plasterboard or cement-bonded ber boards TMA005
Cut-o smaller mouldings to length
Cutting recesses in epoxy/glass ber reinforced plastic

Diameter Type Part No. Application/ Recommended Use
(mm) BiM-TiN, Multi Material, at B-21272 Wood&Metal/ Suitable for deep cutting
85 Cut-o door frame to length on the oor
Cut-out parquet/laminate ooring
Cut-o smaller mouldings to length

Segment saw blade 65 Diameter Type Part No.
(mm) BiM, Wood & Metal, o set B-21319
TMA002 100

Application/ Recommended Use Segment saw blade 85
Non-ferrous metal, FRP, PVC/ Suitable for corners.
Cutting recesses in epoxy/glass ber reinforced plastic TMA007
Cutting sheet metal up to 1mm
Removing old window putty

Diameter Type Part No. Application/ Recommended Use
(mm) BiM-TiN, Multi Material, at B-21288 Wood/ Suitable for ush cutting
65 Plunge-cut in solid wood
Cut-o plastic pipe(PVC) to length

Round saw blade 85 Diameter Type Part No.
(mm) HCS, Wood, o set B-21331
TMA003 85

Plung-cutting saw blades

Application/ Recommended Use
Non-ferrous metal, FRP, PVC
Cutting wood with nails
Cutting recesses in epoxy/glass ber reinforced plastic
Cut-o smaller mouldings to length

Diameter Type Part No.
(mm) BiM-TiN, Multi Material, at B-21294
85

Round saw blade 65 Plunge cut saw blade 65

TMA004 TMA008

Application/ Recommended Use Application/ Recommended Use
Non-ferrous metal, FRP, PVC Wood and nails/ Suitable for plunge cutting
Cutting recesses in epoxy/glass ber reinforced plastic Cutting wood with nails
Cutting sheet metal up to 1mm Cutting a door frame to length
Removing old window putty Plunge cuts in laminated panels.

Diameter Type Part No. Size Type Part No.
(mm) BiM-TiN, Multi Material, at B-21303 (mm) B-21347
65
65 x 40 BiM, Wood and nails

99

Multi Tool Plunge cut saw blade 20

Plunge cut saw blade 65 TMA013

TMA035

Application/ Recommended Use Application/ Recommended Use
Hard Wood/ Suitable for plunge cutting Wood
Plunge cutting in laminated panels or hard wood Plunge-cut in softwood
Cutting a recess in furniture components Cutting a recess in furniture components
Flush cutting wooden components Flush cutting wooden components to length

Size Type Part No. Size Type Part No.
(mm) BiM, Hard Wood B-40397 (mm) HCS, Wood B-21397
65 x 40 20 x 30
Part No.
Plunge cut saw blade 28 Plunge cut saw blade 20 B-21406

TMA009 TMA014

Application/ Recommended Use Application/ Recommended Use
Wood and Metal/ Suitable for deep plunge cutting in wood Wood
Deep plunge cut in wood, abrasive wooden materials, plastics Plunge-cut in softwood
Cut-o small non-ferrous metal pipes and pro les Cutting a recess in furniture components
Cut-o non-hardened nails and steel pro les with smaller dimensions Filigree adjustment work in wood

Size Type Part No. Size Type
(mm) BiM, Wood and Metal B-21353 (mm) HCS, Wood
28 x 50 10 x 30

Plunge cut saw blade 32 Plunge cut saw blade 32

TMA010 TMA015

Application/ Recommended Use Application/ Recommended Use
Hard Wood Metal/ Suitable for ush cutting in nails or copper pipe
Plunge cut in laminated panels or hardwood Plunge cuts in plasterboard
Cutting a recess in furniture components
Flush cutting wooden components Size Type Part No.
(mm) B-21412

Size Type Part No. 32 x 30 BiM, Metal
(mm) BiM, Hard Wood B-21369
32 x 40
Part No.
B-21381 Plunge cut saw blade 20

TMA016

Plunge cut saw blade 32

TMA012

Application/ Recommended Use Application/ Recommended Use
Wood Metal/ Suitable for ush cutting in nails or copper pipe
Plunge-cut in softwood Plunge cuts in plasterboard
Cutting a recess in furniture components
Flush cutting wooden components to length Size Type Part No.
(mm) BiM, Metal B-21428
20 x 20

Size Type Plunge cut saw blade 10
(mm) HCS, Wood
32 x 40 TMA017

Application/ Recommended Use
Metal/ Suitable for ush cutting in nails or plasterboard
Filigree adjustment work on non-ferrous pro les
Plunge cuts in plasterboard

Size Type Part No.
(mm) BiM, Metal B-21434
10 x 20

100