Dinex Universal Parts

UNIVERSAL PARTS

Exhaust & Emission going the extra mile
Technologies

Universal Parts
Universalteile
Części Uniwersalne
Evrensel Parçalar
Universal Parts
Piezas Universales
Ricambi Universali
Universālās Detaļas
Универсальные Детали
Universaldele
Univerzalni Delovi
Universal Parts
迪耐斯通用项目
Yleiset Osat

Contents

Symbol Identification 5
Filter Technologies 5

Clamps and Brackets

FlexFit Clamps 6

ButtFit Flat & Circle Clamps 7

PipeFit & TightFit Clamps 8

HoseFit, Heavy Duty Clamps & CT Band Clamps 9

Truck Make Clamps 10

U-Bolt Clamps 12

DIN Clamps 13

Hinged Clamps, Pipe Brackets & Pipe Clamps 14

V-Clamp Connection

V-Clamp Connection Kits (Truck Make Specific) 15

Heavy Duty V-Clamps 16

V-Clamp Low Leakage 17

Rubber Mountings

Rubber Mountings 18

Pipe & Silencer Straps

Pipe & Silencer Straps 19

Heat Shields

Heat Shields 20

Bends & Elbows

Bends OD/OD 21

Bends OD/ID 23

Elbows 25

Pipes & Adaptors

Straight Pipes 27

Extension Pipes 28

Tail Pipes 29

T & Y Adaptors, Connectors 30

Pipe Adaptors 31

Pipe Connectors 32

Flex Pipes 33

Bellows 36

going the extra mile 3

Silencers 38 Symbol Identification
38
Absorption & Reflection Silencers 38 L = Length
Auxiliary Heater Exhaust Flex pipes 39 mm = Millimetre
NOx Sensors 45 Inch = Inch
Universal Silencers Ø = Diameter
Universal Silencers, INOX OD = Outside Diameter
ID = Inside Diameter
Spark Arrestors 46 CLR = Center Line Radius
47 ALU = Aluminised
Spark Arrestors INOX = Stainless Steel
Pipe Spark Arrestors & Exhaust Trims ZINC = Zinc Coated
GALV = Galvanized
Catalytic Converters 48 SPD = Mild Steel
OE = Original Equipment
Universal Catalytic Converters HP = Horse Power
BP = Back Presure
Rain Caps
Filter Technologies
Rain Caps 49

Vertical Systems 50
51
VIP Systems – Identifying the Correct VIP System 52
VIP Systems – Parts Specification 53
VIP Systems – Accessories
Vertical Outlet Pipe Systems

Particle Filters 56 • Cost effective cordierite filter • Strong, thermally resistant • Catalytic coating for passive
57 with a long proven track record filter technology produced regenerataion* on SiC
Universal Particle Filters 60 for retro-fit. from sintered Silicon Carbide filter that provides all the
Particle Filters 76 (SiC). advantages of the DiSIC ®
Standard Modules Baffle Size 77 • Well functioning technology System, but without the need
Special Modules with Bended Pipe & Brackets 79 for off-road with high exhaust • 5 times higher soot load of FBC additive.
Special Modules 80 gas temperatures. capacity than traditional
Special Modules & Mounting Brackets 81 ceramic filters, allows • The most commonly used
Spare Parts & Insulation for Filters 82 • Catalytic coating for passive variations in duty cycle without technology for on-road retro-
Universal DiTRAP©(CRT® Replacements) 82 regeneration* without use of exotherming fit on heavy duty trucks and
DiNLOG® 83 additives or active heating. buses.
Filter Cleaning Machines & Accessories • Using Fuel Born Catalyst (FBC)
Kiln & Accessories additive for regeneration*. • Well proven technology with
more than 15.000 installations
around Europe

*) Regeneration is highly dependent
on the vehicles’ driving cycles and
the filter technology used. Always
respect the information provided by
the datalogger and consult your local
Dinex office for further advice.

4 going the extra mile 5

FlexFit Clamps ButtFit Flat & Circle Clamps

FlexFit Clamps

Dinex no. Dinex no Ø flex Ø pipe 75 mm

ALU INOX mm Inch mm Inch

99250 99251 55,0 2 1/8 50,0 2

99257 57,0 2 1/4 62,0 2 1/2 Ø Ø

99258 57,0 2 1/4 62,0 2 1/2

99260 99261 65,0 2 1/2 60,0 2 3/8

99264 99265 67,0 2 2/3 63,5 2 1/2

99270 99269 75,0 3 70,0 2 3/4 ButtFit Flat Clamps Circle Clamps

99276 99277 81,2 3 1/5 76,2 3 75 mm Dinex no. Dinex no. Ø mm Ø Inch Dinex no. Ø mm Ø Inch
Øpipe
99280 99281 84,0 3 1/3 80,0 3 1/8 ALU INOX ZINC
49 mm
99289 99290 93,6 3 2/3 88,9 3 1/2 Øpipe Øflex 99350/T 99450/T 50,0 2 99082 76,0 - 82 ,0 3
Øflex
99300 99301 105,0 4 1/5 100,0 3 7/8 99457/T 57,0 2 1/4 99094 83,0 - 94,0 3 1/2

99302 99303 106,6 4 1/5 101,6 4 99360/T 60 2 3/8 99107 95,0 - 107,0 4

99308 113,0 4 1/2 108,0 4 1/4 99363/T 99463/T 63,5 2 1/2 99114 108,0 - 144 ,0 4 1/4

99310 99311 115,0 4 1/2 110,0 4 1/3 99370/T 99470/T 70,0 2 3/4 99119 115,0 - 119,0 4 1/2

80871 99315 119,0 4 3/4 114,3 4 1/2 99376/T 99476/T 76,2 3 99132 120,0 - 132 ,0 5

99320 99321 125,0 5 120,0 4 3/4 99389/T 99489/T 88,9 3 1/2 99154 142,0 - 154 ,0 6

99327 99328 132,0 5 1/5 127,0 5 99402/T 99502/T 101,6 4

99352 99350 158,0 6 1/5 152,0 6 99408/T 108 4 1/4

Material thickness 0,7 - 1,25 mm

99414/T 99514/T 114,3 4 1/2

FlexFit Clamps 99427/T 99527/T 127,0 5

Dinex no. Dinex no Ø flex Ø pipe 99428/T 138 5 1/2

ALU INOX mm Inch mm Inch 99455/T 99553/T 152,0 6

99316 119 4 3/4 114 4 1/2 Tightening torque 80 Nm.

Material thickness 0,7 mm

99317 132 5 1/4 128 5

Material thickness 0,7 mm

6 going the extra mile 7

PipeFit & TightFit Clamps HoseFit, Heavy Duty Clamps
& CT Band Clamps

Ø Ø Ø Ø

35 25 28
mm mm mm

PipeFit Clamps TightFit Clamps A Heavy Duty Clamps

HoseFit Clamps

Dinex no. Ø mm Ø Inch Clamp size range Dinex no. Dinex no. Ø mm Ø Inch Dinex no. Ø mm Ø Inch A mm Dinex no. Ø mm Ø Inch

INOX ALU INOX INOX ALU

99815 47,6 1 7/8 Ø48 - Ø54 99851 99852 51,0 - 54, 0 2 99150 50 ,0 - 5 5,0 2 - 2 1/5 20 99548 45, 5 - 4 8,5 1 4/5 - 1 9/10

99800 50,8 2 Ø51 - Ø57 99858 99859 54,0 - 57, 0 2 1/4 99157 55,0 - 59 ,0 2 1/5 - 2 1/3 20 99550 4 7,5 - 50,5 1 9/10 - 2

99801 57,0 2 1/4 Ø57 - Ø63 99860 99861 6 0,0 - 63, 0 2 3/8 99160 59 ,0 - 6 3,0 2 1/3 - 2 1/2 20 99553 50,5 - 5 3,5 2 - 2 1/10

99816 60,3 2 3/8 Ø60 - Ø66 99864 99865 64,0 - 67, 0 2 1/2 99164 63 ,0 - 6 8,0 2 1/2 - 2 2/3 25 99555 52,5 - 5 5,5 2 - 2 2/5

99802 63,5 2 1/2 Ø64 - Ø70 99866 99867 66,0 - 69, 0 2 5/8 99176 79 ,0 - 8 5,0 3 - 3 1/3 25 99558 55,5 - 58, 5 2 2/5 - 2 1/3

99817 66,7 2 5/8 Ø67 - Ø73 99871 99872 71,0 - 74, 0 2 3/4 99189 91, 0 - 97 ,0 3 1/2 - 3 4/5 30 99560 57,5 - 60,5 2 1/4 - 2 2/5

99803 69,9 2 3/4 Ø70 - Ø76 99877 99878 78,0 - 81, 0 3 99202 104, 0 - 11 2,0 4 - 4 2/5 25 99563 60 ,5 - 6 3,5 2 2/5 - 2 1/2

99804 76,2 3 Ø76 - Ø82 99880 99881 81,0 - 84, 0 3 1/8 99214 112,0 - 121 ,0 4 2/5 - 4 4/5 20 99565 62 ,5 - 6 5,5 2 1/2 - 2 2/3

99818 79,4 3 1/8 Ø80 - Ø86 99885 99886 86,0 - 89, 0 3 1/3 99227 1 21,0 - 133 ,0 4 4/5 - 5 1/5 30 99568 65,5 - 68, 5 2 2/3 - 2 7/10

99805 85,0 Ø85 - Ø91 99892 99893 91,0 - 94, 0 3 1/2 99235 130, 0 - 14 0,0 5 - 5 1/2 30 99570 67, 5 - 7 0,5 2 2/3 - 2 7/8

99806 88,9 3 1/2 Ø89 - Ø95 99900 99901 10 1,0 - 105, 0 4 Tightening torque 30 Nm. 99573 71 ,5 - 7 3,5 2 4/5 - 2 9/10
Material thicknes 1.5 mm.
99575 73,5 - 75, 5 2 9/10 - 3
99819 100,0 Ø100 - Ø106 99903 99904 10 2,0 - 106, 0 4
99578 75,5 - 78, 5 3 - 3 1/9
99807 101,6 4 Ø102 - Ø108 99910 99911 11 1,0 - 116, 0 4 3/8
99580 77 ,5 - 8 0,5 3 - 3 1/6
99808 110,0 Ø 110 - Ø116 99915 99916 11 5,0 - 119, 0 4 1/2 Ø
99585 82 ,5 - 8 5,5 3 1/4 - 3 2/5
99809 114,3 4 1/2 Ø114 - Ø120 99920 99921 12 2,0 - 127, 0 4 3/4
99589 87 ,5 - 9 0,5 3 2/5 - 3 1/2
99810 120,0 Ø120 - Ø126 99928 99925 12 8,0 - 132, 0 5
99594 91 ,5 - 9 4,5 3 5/8 - 3 5/7
99811 127,0 5 Ø127 - Ø133 99953 99954 15 3,0 - 158, 0 6
15,8 mm 99600 97,5 - 10 0,5 3 4/5 - 4

99812 139,7 5 1/2 Ø140 - Ø146 99944 14 2,0 - 146, 0 5 1/2 CT Band Clamps 99604 10 1,5 - 104, 5 4 - 4 1/8

99813 152,4 6 Ø152 - Ø158 99956 15 8,0 - 163, 0 6 1/5 Dinex no. Ø mm Inch 99607 104,5 - 10 7,5 4 1/8 - 4 1/4

Tightening torque 60 Nm. Tightening torque 30 Nm. INOX 99610 107,5 - 11 0,5 4 1/4 - 4 1/3
Material thickness 1.5 mm Material thickness 1.5 mm
Heavy Duty
98870 32 - 54 1 1/4 - 2 1/8 99614 111,5 - 11 4,5 4 2/5 - 4 1/2

98871 44 - 67 1 3/4 - 2 5/8 99620 117,5 - 12 0,5 4 5/8 - 4 6/8

98872 57 - 79 1 1/4 - 3 1/8 99624 121,5 - 12 4,5 4 4/5 - 4 7/8

98873 70 - 92 2 3/4 - 3 5/8 99627 124,5 - 12 7,5 4 7/8 - 5

98874 83 - 105 3 1/4 - 4 1/8 99630 127,0 - 13 0,5 5 - 5 1/8

98875 95 - 117 3 3/4 - 4 5/8 99633 1 30,5 - 133, 5 5 1/8 - 5 1/4

98876 108 - 130 4 1/4 - 5 1/8 Tightening torque 60 Nm.
Material thicknes 2 - 2,5 mm.
98877 121 - 143 4 3/4 - 5 5/8

98878 133 - 156 5 1/4 - 6 1/8

98879 146 - 168 5 3/4 - 6 5/8

98880 159 - 181 6 1/4 - 7 1/8

98881 171 - 194 6 3/4 - 7 5/8

98882 184 - 206 7 1/4 - 8 1/8

98883 197 - 219 7 3/4 - 8 5/8

8 98884 210 - 232 8 1/4 - 9 1/8 going the extra mile 9

Tightening torque 20 Nm.
Material thickness 0.8 mm.



U-Bolt Clamps DIN Clamps

U-Bolt Clamps - M8 DIN Clamps

Dinex no. Dinex no. A mm C mm Ø mm Ø Inch Dinex no. Dinex no. Ø mm Inch Mercedes OE MAN OE
ZINC INOX
90028 50,0 25,0 29,0 1 1/8 ALU INOX
90032 60,0 23,0 32,0 1 1/4
90033 70,0 33,0 32,0 1 1/4 Ø A 99741 40,3 1 1 /4
90035 63,0 26,0 37,0 1 3/8 C
90038 65,0 26,0 38,0 1 1/2 99742 42,5 1 1/2 Ø
90041 70,0 29,0 44,0 1 5/8 25-30 mm
90045 75,0 25,0 45,0 1 3/4 99745 45,5 1 3/4 071.555.045.500
90048 75,0 25,0 48,0 1 7/8
90052 80,0 25,0 52,0 2 99748 48,5 1 7/8 071.555.048.500
90054 85,0 25,0 54,0 2 1/8
90057 85,0 40,0 57,0 2 1/4 99750 50,5 2 071.555.050.500
90060 90,0 33,0 60,0 2 3/8
90061 100,0 43,0 60,0 2 3/8 99753 53,5 2 1/8 071.555.053.500
90064 95,0 35,0 65,0 2 1/2
90067 95,0 22,0 67,0 2 5/8 99755 55,5 071.555.055.500
90070 100,0 22,0 70,0 2 3/4
90073 100,0 22,0 73,0 2 7/8 99758 58,5 2 1/4 071.555.058.500
90069 105,0 27,0 70,0 2 3/4
90076 105,0 25,0 76,2 3 99760 60,5 2 3/8 071.555.060.500
90078 115,0 35,0 76,2 3
90079 120,0 25,0 80,0 3 1/8 99763 63,5 2 1/2 071.555.063.500
90083 115,0 24,0 83,0 3 1/4
90089 125,0 25,0 88,9 3 1/2 99765 65,5 071.555.065.501
90092 130,0 30,0 92,0 3 5/8
90095 135,0 40,0 95,3 3 3/4 99768 68,5 2 5/8 071.555.068.500
90102 90107 135,0 30,0 102,0 4
90113 150,0 50,0 102,0 4 99770 70,5 2 3/4 071.555.070.500
90106 140,0 35,0 105,0 4 1/8
90108 155,0 40,0 114,3 4 5/8 99773 73,5 2 3/4 071.555.073.500
90117 162,0 50,0 114,3 4 5/8
90114 90111 150,0 40,0 114,3 4 5/8 99775 75,5 071.555.075.500
90127 90112 165,0 33,0 127,0 5
90129 177,0 48,0 130,0 5 1/8 99776 99777 76,5 3

99778 78,5 3 1/8 071.555.078.502

99780 80,5 071.555.080.502

99785 85,5 3 3/8 071.555.085.502 06.67041.0121

99789 99790 90,5 3 1/2 071.555.090.501 06.67041.0123

99794 94,5 3 3/4 06.67041.0125

99700 100,5 071.555.100.500 06.67041.0124

99702 102,5 4

99704 99703 104,5 4 1/8 071.555.104.501 81.97420.2017

99708 108,5 4 1/4

99710 99711 110,5 4 3/8 071.555.110.501 81.97420.0073

99714 99715 114,5 4 1/2 81.97420.0085

99720 99721 120,5 4 3/4 071.555.120.500 81.97420.0076

99724 124,5 4 7/8 071.555.124.500

99727 99728 127,5 5

99730 130,5 5 1/8 071.555.130.500 81.97401.0731

Material thickness 3-5 mm.

12 going the extra mile 13

Hinged Clamps, Pipe Brackets V-Clamp Connection Kits (Truck Make Specific)
& Pipe Clamps
DAF

Dinex no. Dinex no. Dinex no. Dinex no. Dinex no. Dinex no. Ø mm Inch

Male Male Clamp Clamp Female Female Ø
Ø
ALU INOX ALU INOX ALU INOX
Hinged Clamps
78201 21817 78217 101,6 4
Dinex no. Ø mm Inch
ZINC 78215 78225 21821 21836 78216 114,3 4 1/2
98753 53,5 2
98755 55,5 2 1/8 78229 21850 78230 78233 127,0 5 Female
98758 58,5 2 1/4
98760 60,5 2 3/8 Ø Mercedes Male Clamp
98763 63,5 2 1/2
98765 65,5 2 5/8 Dinex no. Dinex no. Dinex no. Dinex no. Dinex no. Dinex no. Ø mm Inch
98768 68,5 2 3/4
98770 70,5 2 7/8 Male Male Clamp Clamp Female Female
98773 73,5 2 7/8
98775 75,5 3 ALU INOX ALU INOX ALU INOX
98777 78,5 3 1/8
98780 80,5 3 1/8 78150 50829 50971 78151 50,0 2
98785 85,5 3 3/8
98790 90,5 3 1/2 78175 78220 50810 50972 50218 75,0 3
98794 94,5 3 3/4
98700 100,5 3 7/8 Pipe Clamps 78189 50852 50852 51170 85,0 3 3/8
98704 104,5 4 1/8
98710 110,5 4 3/8 Dinex no. Ø mm Inch 78200 50849 50974 51126 95,0 3 7/8
98715 114,5 4 1/2
98720 120,5 4 3/4 ZINC Volvo
98724 124,5 4 7/8
98730 130,5 5 1/8 99460 60,0 2 3/8

Material thickness 4 mm. 99475 75,0 3 Ø Dinex no. Dinex no. Dinex no. Dinex no. Dinex no. Dinex no. Ø mm Inch

99480 80,0 3 1/8 ØC Male Male Clamp Clamp Female Female
L
99490 90,0 3 1/2 Ø ALU INOX ALU INOX ALU INOX

99410 110,0 4 3/8 C 78190 78221 80905 78890 78191 78235 88,9 3 1/2
L
99420 120,0 4 3/4 80806 78192 88,9 3 1/2

Material thickness 4 mm. 78202 78223 80910 78803 78203 78222 101,6 4

78214 78224 80848 78815 78218 78236 114,3 4 1/2

78227 78239 80921 78828 78228 78232 127,0 5

Scania

Dinex no. Dinex no. Dinex no. Ø mm Inch

Male Clamp Female

ALU ALU ALU

Pipe Brackets 78256 68835 78257 114,3 4 1/2

Dinex no. Ø mm Ø Inch C mm C Inch L mm Design A 78269 68858 78268 127,0 5

ZINC Other Clamps

90151 50,0 2 11 1/2 85,0 A 1 2
Mercedes style Volvo style
90161 60,0 2 3/8 11 1/2 90,0 A Dinex no. Dinex no. Ø mm Ø inch Design 3 4
DAF/Volvo style Volvo style
90171 70,0 2 3/4 11 1/2 100,0 A ZINC INOX

90175 75,0 3 11 1/2 105,0 A 21817 21836 110,0 4 1/2 3

90181 80,0 3 1/8 11 1/2 122,0 A B 21821 21850 127,0 5 3
90191 90,0 3 1/2 11 1/2 115,0 B
50810 50972 76,0 3 1

90104 100,0 3 7/8 11 1/2 120,0 B 50829 50971 50,0 2 1

90110 110,0 4 3/8 11 1/2 150,0 A 50849 50974 102,0 4 1

90116 115,0 4 1/2 11 1/2 155,0 A 50852 50973 88,9 3 1/2 1

90121 120,0 4 3/4 11 1/2 160,0 B 80848 114,0 4 1/2 2
Material thickness 4 mm.
80905 88,4 3 1/2 3

80910 101,6 4 3

81921 127,0 5 4

14 going the extra mile 15

Heavy Duty V-Clamps V-Clamps Low Leakage

(for Euro IV to VI Applications)

B°

A C
Ø

D Reinforcement strap L1
E

Clamp Ø Pipe Ø Pipe Ø Vee Angle Vee Depth Vee Tip Strap Fastener

Dinex no Dinex no. A mm mm Inch B° C mm D mm E mm Size

ALU INOX L2

51958 73 54,0 2 40° 4 6,60 20 M6
66804 73 54,0 2 76°
8 R 2,5 none M6 Male

68896 80 63,5 2 1/2 40° 5,8 6,75 20 M6

74809 80 63,5 2 1/2 40° 7 8,0 20 M6 Clamp
Gasket
88861 82 63,5 2 1/2 40° 4 6,0 20 M6 Ø

73809 84 63,5 2 1/2 76° 8 R 2,5 none M6 Female

47820 97 76,1 3 40° 4,4 10,00 20 M6

68897 97 76,1 3 40° 5 8,00 20 M6

18921 99 76,1 3 40° 7 5,00 20 M6

44805 102 76,1 3 40° 7 10,00 20 M6 For Applications < 550° C
68899 102 88,9 3 1/2 40°
6 6,30 20 M6 Dinex no. Dinex no. L1 Dinex no. Dinex no. L2 Ø Ø
Inch
78801 105 88,9 3 1/2 40° 4 6,00 20 M6 Clamp* Male** mm Gasket Female** mm mm 3
3 1/2
70819 108 88,9 3 1/2 40° 7 5,00 20 M6 99679 532511 100 78844 532510 100 76,1 4
4 1/2
78890 113 88,9 3 1/2 40° 7 10,00 20 M6 99680 532515 61 78845 532514 100 88,9 5

21895 116 88,9 3 1/2 40° 7,1 6,80 20 M6 99681 532517 100 78846 532516 100 101,6

80807 119 88,9 3 1/2 84° 9,6 8,10 25 M8 99682 532521 100 78847 532520 100 114,3

68898 120 101,6 4 40° 7,3 6,60 25 M8 99683 532523 55 78848 532522 100 127,0

70804 121 101,6 4 40° 7 10,00 20 M6 * Max tightening torque 40 Nm - one 8 mm bolt

44937 122 101,6 4 40° 7 5,26 20 M6 ** Material: Stainless steel grade EN 1.4303

41833 124 101,6 4 40° 4 6,65 20 M6

80910 78803 125 101,6 4 40° 7 11,00 20 M6

21896 129 114,3 4 1/2 40° 7 10,16 25 M8 For Applications < 1000° C

68835 132 114,3 4 1/2 40° 6 6,00 25 M8 Dinex no. Dinex no. L1 Dinex no. Dinex no. L2 Ø Ø
Inch
68867 132 114,3 4 1/2 40° 6 6,00 none M8 Clamp* Male** mm Gasket Female** mm mm 3
3 1/2
80806 135 114,3 4 1/2 86° 9,5 8,10 25 M8 4
4 1/2
78815 137 114,3 4 1/2 40° 7 11,00 20 M6 99684 532511 100 78839 532510 100 76,1 5

29806 138 114,3 4 1/2 40° 7 9,00 20 M6 99685 532515 61 78840 532514 100 88,9

49939 142 114,3 4 1/2 40° 8 9,20 25 M8 99686 532517 100 78841 532516 100 101,6

51964 145 127,0 5 40° 6 6,60 25 M8 99687 532521 100 78842 532520 100 114,3

68858 146 127,0 5 40° 6 6,00 20 M6 99688 532523 55 78843 532522 100 127,0

78828 151 127,0 5 40° 7 10,00 25 M8 * Max tightening torque 40 Nm - two 8 mm bolts

80918 151 127,0 5 40° 7 10,00 25 M8 ** Material: Stainless steel grade EN 1.4303

80921 151 127,0 5 40° 7 10,00 20 M6

81921 151 127,0 5 40° 7 10,00 none M6

21850 151 127,0 5 40° 7 7,00 20 M6

99128 155 127,0 5 40° 7 5,26 20 M6

28905 159 127,0 5 40° 9,5 8,80 25 M8

86810 175 152,2 6 40° 7 6,50 20 M6

43958 186 152,2 6 40° 7 3,20 20 M6

16 going the extra mile 17

Rubber Mountings Pipe & Silencer Straps

M 8

M8 Ø35 M8 27

Dinex no. Ø mm Ø Inch Dinex no. Ø mm Ø Inch
15
20 ALU ALU

34

120-200 mm
49907 21822 50907 51941 98060 60,0 2 3/8 49815 180x280 7 x 10 3/ 4
81.96210.052 322.504.0212 001.987.5240
0285530 98076 76,2 3 88805 202x302 8 x 11 7/ 8
651183
98089 88,9 3 1/2 49841 180x280 7 x 10 3/ 4
M 10
98102 101,6 4 Ø 70816 254x381 1 0 x 1 5

M10 Ø48 98108 180,0 4 1/4 50860 180x280 7 x 10 3/ 4

98114 114,3 4 1/2 49801 250x300 9 7/8 x 11 7/ 8

98127 127,0 5 49833 305x505 12 x 19 7/ 8

49838 50950 49910 64804 44800 98155 155,0 6 21819 254x380 1 0 x 1 5
81.96210.0101 697.987.0139 81.96210.0153 5000750531 0487257
98184 184,0 7
Ø48 Ø48
98206 206,0 8
33 29
98249 249,0 10

98260 260,0 10 1/4

98284 284,0 11

50910 69804 80949 64817 69817 98300 300,0 11 3/4 49815 88805
001.987.5340 4.771.333.000 324842 5000750630 4.771.244.000
98320 320,0 12

Ø48

80951 70807 24903 30 Dinex no. Ø mm Ø Inch
1580440 36233 s1 104939-8
64826 ALU 49841 70816
5000750518
98752 155,0 6
Ø
M 12 98778 178,0 7 40 mm

98784 184,0 7 1/4

M12 Ø75 M12 98703 206,0 8

40 26 98728 228,0 9 50860 49801

98754 254,0 10

M12 M12 98779 284,0 11

21820 80950 68900 92975 21905 98805 300,0 12
0221342 6850149 40607 4.771.308.000 1405183
28800 380,0 15
Material thickness 3 mm.
Universal 49833 21819
13
11
15

56 295 40
50984
50912 24902 50904 64801 Adjustable
667.490.0037 100348-3 309.490.0037 202.492.0344 0000689778 Silencer Strap

Ø8 Dinex no. Ø mm Ø Inch

Dinex no. 98061 65 2 1/2

ALU 98062 65 2 1/2

95505 Material thickness 3 mm.
Material thickness 4 mm.
24904 21828 28837 50809 50985 98061 98062
117280-3 0298390 98415197 381.492.0082 901.492.0044

18 For body straps for specific emission modules or vertical systems, please see seperate sections of the catalogue (page 51-52 and 60-75).

going the extra mile 19

Heat Shields Bends OD/OD

ID 90˚ (OD/OD) L
OD
Dinex no. L mm Dinex no. ID mm Dinex no. C Dinex no. Dinex no. L mm OD mm OD Inch CLR
Bx2 ALU INOX OD
INOX B (x2) C 91039 129 38,0 1 1/2 54,0 CLR
91046 180 45,0 1 3/4 64,0
95506 1000 95876 76,2 95801 L1 91050 190 50,0 2 95,0
LL 91250 190 50,8 2 95,0
95520 1000 95889 88,9 95801 91056 240 57,0 2 1/4 85,0
L 91059 91259 240 60,0 2 3/8 100,0
95532 1000 95802 101,6 95801 91264 190 63,5 2 1/2 85,0
91063 265 63,5 2 1/2 85,0
95545 1000 95814 114,3 95801 91065 265 65,0 2 5/8 91,0
91071 270 70,0 2 3/4 98,0
95627 1000 95827 127,0 95801 91073 290 75,0 3 135,0
91075 91275 295 76,2 3 99,1
95614 1000 95884 184,0 95801 91080 290 80,0 3 1/8 115,0
91088 91288 320 88,9 3 1/2 135,0
95636 1000 95906 206,0 95801 91100 380 100,0 3 7/8 203,0
91101 91201 380 101,6 4 150,0
95680 1000 95950 250,0 95801 91106 91107 254 101,6 4 150,0
91109 400 110,0 4 3/8 148,0
95717 1250 95448 265,0 95801 91111 450 110,0 4 3/8 148,0
91113 390 114,3 4 1/2 161,0
95714 1000 95984 284,0 95801 91213 400 114,3 4 1/2 161,0
91120 410 120,0 4 3/4 170,0
68814 900 68813 300,0 91125 330 127,0 5 173,0
91127 91228 415 127,0 5 173,0
95716 1300 95426 300,0 95801 91153 475 152,4 6 225,0

D

Dinex no. L mm Ø mm L1 mm

ZINC

95550 800 50,0 100

95560 800 60,0 100

95570 800 70,0 100

95575 800 75,0 100

95589 800 90,0 140

95510 800 110,0 140

95514 800 114,0 140

95521 800 120,0 140

95503 800 160,0 140

Ø - pipe diameter
Brackets are included

20 Material thickness ranging from 1,5 to 2,0 mm. going the extra mile 21



Bends OD/ID Elbows

60˚ (OD/ID) OD/OD

Dinex no. L mm ID mm OD mm OD Inch CLR Dinex no. L mm Dinex no. L mm OD mm OD Inch L
OD
ALU SPD INOX
OD
92338 100,0 38,3 38,0 1 1/2 100 L ID 96050 200 50,0 2 T
ID
92342 100,0 42,3 42,0 1 5/8 95 CLR 96064 200 63,5 2 1/2
OD
92348 90,0 48,3 48,0 2 95 96075 194 96375 200 76,2 3
CLR
92350 80,0 50,3 50,0 2 95 OD 96088 180 96388 201 88,9 3 1/2 OD
L
92360 165,0 60,3 60,0 2 3/8 100 Material thickness ranging from 1,5 to 2,0 mm.LL 96101 200 96401 236 101,6 4
L
92365 210,0 65,3 65,0 2 5/8 91 91104 152 101,6 4

92370 200,0 70,3 70,0 2 3/4 135 96107 190 108,0 4 1/4

92375 250,0 75,3 75,0 3 135 96113 200 200 114,3 4 1/2

92380 250,0 80,3 80,0 3 1/4 115 96412 254 114,3 4 1/2

92389 202,4 89,2 88,9 3 1/2 177 96126 223 96426 266 127,0 5

92390 200,0 90,3 90,0 3 5/8 177

92400 254,0 100,3 100,0 4 150 OD/OD (Welded/Thin Wall)

92410 210,0 110,3 110,0 4 3/8 260 Dinex no. Dinex no. OD mm Inch T mm CLR

92414 240,0 114,6 114,3 4 1/2 161 SPD INOX

92420 400,0 120,3 120,0 4 3/4 161 96046 96246 50,8 2 1,5 50,8

92427 140,0 127,3 127,0 5 173 96063 63,5 2 1/2 1,5 50,8 OD

96263 63,5 2 1/2 1,5 63,0

45˚ (OD/ID) 96274 76,2 3 1,5 63,5

Dinex no. Dinex no. L mm ID mm OD mm OD Inch CLR 96074 76,2 3 1,5 76,2

ALU INOX 96287 88,9 3 1/2 1,5 76,0

92038 112,0 39,0 38,0 1 1/2 54 96087 96288 88,9 3 1/2 1,5 88,9

92045 142,5 46,0 45,0 1 3/4 64 96300 101,6 4 1,5 85,0

92051 140,0 51,3 50,0 2 95 96100 96301 101,6 4 1,5 101,6

92550 180,0 51,5 50,0 2 95 96106 108,0 4 1/4 1,5 76,0

92551 180,0 51,5 50.8 2 95 96312 114,3 4 1/2 1,5 96,8

92057 150,0 57,6 57,0 2 1/4 85 96112 114,3 4 1/2 1,5 114,3

92560 150,0 60,5 60,0 2 100 96325 127,0 5 1,5 100,0

92060 150,0 60,5 60,0 2 3/8 100 96109 127,0 5 1,5 127,0

92563 180 64,0 63,5 2 1/2 85 96125 130,0 5 1/8 1,5 100,0

92064 180,0 64,0 63,5 2 1/2 85 OD/OD (Cast)

92066 180,0 65,5 65,0 2 5/8 91 OD
T
92070 205,0 70,3 70,0 2 3/4 98 Dinex no. Dinex no. OD mm Inch T mm CLR

92074 230,0 75,5 75,0 3 135 SPD INOX

92076 92576 205,0 76,7 76,1 3 99,1 96260 60,0 2 3/8 2,9 76,0

92089 92589 225,0 89,4 88,9 3 1/2 177 96270 70,0 2 3/4 2,9 92,0

92102 92502 245,0 102,1 101,6 4 203 96277 76,1 3 2,0 95,0 OD

92103 235,0 102,1 101,6 4 150 96276 76,1 3 2,9 95,0

92108 260,0 108,5 108,0 4 1/4 148 96290 88,9 3 1/2 2,0 114,0

92110 260,0 110,5 110,0 4 3/8 148 96289 88,9 3 1/2 3,2 115,0

92114 92514 260,0 114,8 114,3 4 1/2 161 96202 101,6 4 3,6 134,0

92121 365,0 121,0 120,0 4 3/4 170 96204 104,0 4 2,0 150,0

92126 305,0 128,0 127,0 5 173 96208 108,0 4 1/4 3,6 143,0

92128 92528 365,0 128,0 127,0 5 173 96215 114,8 4 1/2 2,0 152,0

92527 375,0 128,0 127,0 5 173 96214 114,3 4 1/2 3,6 153,0

92152 338,0 153,5 152,4 6 225 96230 129,0 5 1/8 2,0 188,0

24 96229 133,0 5 1/4 4,0 188,0 25

going the extra mile

Material thickness ranging from 1,5 to 2,0 mm.

Elbows Straight Pipes

OD/ID ALU

Dinex no. Dinex no. L1 mm L2 mm OD mm ID mm OD Inch L1 Dinex no. Dinex no. Dinex no. OD mm OD Inch
OD L2000mm L3000mm L6000mm
SPD INOX 93738 93938 38,0 1 1/2 OD
L1 93745 93945 45,0 1 3/4 OD
96051 200 200 50,0 51,3 2 ID 93750 93951 50,0 2
94754 93954 54,0 2 1/8
96065 200 200 63,5 64,0 2 1/2 94757 93957 57,0 2 1/4
93361 93360 93960 60,0 2 3/8
96076 96376 200 200 76,1 77,0 3 ID 93364 93363 63,5 2 1/2 L
L2 93366 93365 93916 65,0 2 5/8
96089 200 210 89,0 89,5 3 1/2 93371 93370 93970 70,0 2 3/4 MILD STEEL
94774 75,0 2 7/8
96389 201 203 88,9 91,0 3 1/2 94775 93975 76,0 3 Dinex no. Dinex no. Dinex no. OD mm OD Inch
94780 93981 80,0 3 3/8 L2000mm L3000mm L6000 mm
96102 200 210 101,6 102,5 4 94790 93990 88,9 3 1/2 93332 32,0 1 1/4
94700 94900 100,0 4 93335 35,0 1 3/8
96402 243 243 101,6 102,1 4 94703 93384 93903 101,6 4 93338 38,0 1 1/2
94709 108,0 4 1/4 93344 45,0 1 3/4
96108 200 210 108,0 108,5 4 1/4 94710 93911 110,0 4 1/4 93348 48,0 1 7/8
94715 93915 114,3 4 1/2 93350 50,0 2
96110 200 210 110,0 111,0 4 1/3 94720 93921 120,0 4 3/4 93354 54,0 2 1/8
94727 93385 93928 127,0 5 93357 57,0 2 1/4
96114 96414 207 207 114,3 114,5 4 1/2 94740 140,0 5 1/2 93358 60,0 2 3/8
94750 150,0 5 7/8 93364 63,5 2 1/2
91126 255 255 127,0 128,0 5 93753 93953 152,4 6 93371 70,0 2 3/4
93377 93976 76,2 3
96127 225 223 127,0 128,0 5 93379 80,0 3 1/8
93383 83,0 3 1/4
96427 265 265 127,0 128,0 5 93390 93389 88,9 3 1/2
93303 93902 101,6 4
ID/ID 93309 93908 108,0 4 1/4
93310 110,0 4 5/16
Dinex no. Dinex no. L1 mm L2 mm ID mm ID Inch 93315 93914 114,3 4 1/2
94727 93327 93927 127,0 5
SPD INOX 93352 152,4 6
93359 160,0 6 5/16
97051 200 200 51,3 2

97065 9 6373 200 200 64,0 2 1/2

97076 200 200 77,0 3 ID
L2
96377 200 200 76,8 3

97089 200 200 89,5 3 1/2

96390 200 200 89,5 3 1/2

97102 200 210 102,5 4 INOX

96403 243 243 102,1 4 Dinex no. Dinex no. OD OD Inch

97110 220 210 110,5 4 3/8 L1000mm L2000mm

97108 200 210 108,5 4 1/4 93538 38,0 1 1/2

97114 207 207 114,5 4 1/2 93550 50,0 2

96415 254 254 114,8 4 1/2 93552 93551 51,0 2

97127 225 225 128,0 5 93560 60,0 2 3/8

93545 93566 63,0 2 1/2

93576 76,2 3

93589 88,9 3 1/2

93502 101,6 4

93514 114,3 4 1/2

93527 127,0 5

26 Material thickness ranging from 1,5 to 2,0 mm. Material thickness 1,5 mm going the extra mile 27

Extension Pipes Tail Pipes

L OD OD ID
ID
ALU LLTail Pipes OD Tail Pipes ID
L
Dinex no. Dinex no. Dinex no. ID mm OD mm OD Inch Dinex no. Dinex no. OD mm Inch L mm Dinex no. Dinex no. ID mm Inch L mm
L600mm L1000mm L1500mm
93651 93051 93151 51,3 50,0 2 ALU INOX ALU INOX
93657 93057 93157 57,6 60,0 2 1/4
93660 93060 93160 60,5 60,0 2 3/8 91477 91476 76,1 3 1000 91450 50,5 2 260
93664 93064 93164 64,0 63,5 2 1/2
93670 93070 93170 70,3 69,8 2 3/4 91276 76,0 3 1500 91460 60,5 2 3/8 305
93676 93076 93176 76,7 76,2 3
93689 93089 93189 89,4 88,9 3 1/2 91489 89,0 3 1/2 1000 91465 65,5 2 5/8 1500
93602 93002 93102 102,1 101,6 4
93608 93008 93108 108,5 108,0 4 1/4 80714 88,9 3 1/2 1220 91470 70,5 2 3/4 300
93610 93010 93110 111,0 110,0 4 3/8
93614 93014 93114 114,8 114,3 4 1/2 91289 88,9 3 1/2 1500 91475 75,5 3 365
93620 93020 93120 121,0 120,0 4 3/4
93627 93027 93127 128,0 127,0 5 91402 101,6 4 1000 91077 76,2 3 500

INOX 91403 91202 101,6 4 1500 89699 76,0 3 1130

Dinex no. Dinex no. Dinex no. IDmm ODmm OD Inch 91410 110,0 4 3/8 1000 91277 76,2 3 1500
L1000mm L1500mm L2500mm
93564 64,0 63,5 2 1/2 80646 114,3 4 1/2 940 91377 77,0 3 2500
93577 93277 76,7 76,2 3
93590 89,9 89,4 3 1/2 91414 114,0 4 1/2 1000 91480 80,5 3 1/8 340
93503 102,1 101,6 4
93515 114,8 114,3 4 1/2 80647 114,0 4 1/2 1450 91090 90,2 3 1/2 500
93528 128,0 127,0 5
91214 114,3 4 1/2 1500 91390 89,5 3 1/2 2500
28
91428 91427 127,0 5 1000 91290 89,5 3 1/2 1500

91429 91426 127,0 5 1500 91491 90,5 3 1/2 360

91433 127,0 5 2000 91401 101,0 3 7/8 375

91003 102,0 4 500

91203 102,0 4 1500

91303 102,1 4 2500

91412 111,0 4 3/8 535

91411 111,0 4 3/8 1500

91215 114,3 4 1/2 1500

OD 80665 115,0 4 1/2 535

91015 115,0 4 1/2 500

80661 115,0 4 1/2 1045

Dinex no. Dinex no. OD mm Inch L mm 91315 115,0 4 1/2 2500

ALU INOX 91421 121,0 4 3/4 515

85639 114,3 4 1/2 313 91420 121,0 4 3/4 1500

91431 91432 128,0 5 500

91430 91227 128,0 5 1500

Material thickness 1,5 mm going the extra mile 29







Bellows Bellows
Additional Bellow Types

With Exterior Steel Braid L L
C C
Dinex no. L mm ID/OD mm C mm D mm D Dinex no. L mm ID/OD mm C mm D mm
D
INOX L INOX ID/OD
C L
95351 150 ID 51,0 100 25 DID/OD 95360 240 ID 61,0 120 60 ID/OD C
ID/OD
95350 275 OD 51,5 215 30 95370 180 ID 71,0 110 35

95361 250 ID 60,5 200 25 95302 179 OD 102,0 103 38

95362 150 ID 60,0 100 25 95314 215 OD 114,3 95 60

95364 250 ID 64,5 200 25

95376 385 ID 76,0 275 50

95375 250 ID 76,5 200 25 Dinex no. L mm ID mm C mm D mm

95389 385 ID 90,0 280 50 INOX ID
OD
95303 330 ID 103 230 50 95390 380 90,0 188 60 D

95301 385 ID 103,0 285 50 L
C
95315 385 ID 115,0 285 50

95328 385 ID 128,0 285 50

Dinex no. L mm OD mm C mm D mm OD

With Steel Braid & Inner Flex Layer INOX D
87141
Dinex no. L mm ID/OD mm C mm D mm 87141 160 102,0 81 42 78202 78203

INOX

95342 100 ID 42,5 50 25

95316 102 ID 45,0 52 25 ID/OD
ID/OD
95317 152 ID 45,0 102 25 70804
L
95318 203 ID 45,0 153 25 Dinex no. L mm ID mm C mm D mm C

95319 254 ID 45,0 204 25 INOX D
L
95320 102 OD 51,0 52 25 95304 240 61,0 203 37 C

95321 152 OD 51,0 102 25 95310 295 89,0 251 22 ID ID D Single layer
ID L Outer braider
95322 203 OD 51,0 153 25 ID C
Single layer
95323 254 OD 51,0 204 25 L

95352 100 ID 51,0 50 25

95353 150 ID 51,0 100 25 Dinex no. L mm ID mm C mm D mm

95354 205 ID 54,0 155 25 INOX

95324 102 ID 57,0 52 25 95311 308 110,0 268 20

95325 152 ID 57,0 102 25 95337 225 85,2 180 22

95326 203 ID 57,0 153 25

95327 254 ID 57,0 204 25

95329 102 ID 63,5 52 25 Dinex no. L mm ID mm C mm

95330 152 ID 63,5 102 25 INOX

95331 203 ID 63,5 153 25 95313 298 111,0 288

95332 254 ID 63,5 204 25 Double layer

95333 102 ID 76,2 52 25

95334 152 ID 76,2 102 25 Dinex no. L mm ID mm
INOX
95335 203 ID 76,2 153 25 88 103
95312
95336 254 ID 76,2 204 25 Single layer
Outer braider

36 going the extra mile 37

Absorption & Reflection Silencers Universal Silencers

ID Ø50-Ø70 / 20-160 HP (kW=HP/1,36)
ID
Ø
L Dinex no. HP kW L mm Ø Inlet Outlet

ALU Ø
L
Absorbtion Silencers 89441 20-70 15-52 495 152 ID 51,5 OD 50,8

Dinex no. L mm Ø ID mm ID Inch

ALU Dinex no. HP kW L mm Ø Inlet Outlet

89352 740 155 51,0 2 ALU Ø
L
89360 950 184 60,5 2 3/8 50401 50-110 37-81 770 181 ID 51,0 ID 51,0

89487 890 184 64,0 2 1/2

89376 1140 184 77,0 3

89438 890 206 103,0 4 Dinex no. HP kW L mm Ø Inlet Outlet Inlet
Ø
68305 1050 300 111,0 4 3/8 ALU
L
87316 1050 300 115,0 4 1/2 89488 20-70 15-52 298 175 ID 51,0 OD 50,0 Outlet

89327 1140 249 128,0 5

87354 1050 300 154,0 6

Dinex no. HP kW L mm Ø Inlet Outlet

ALU Ø
L
Auxiliary Heater Exhaust Flex pipes 29302 90-160 6 6-118 1025 203 ID 64,0 ID 77,0

Auxiliary heater exhaust flex pipes (Double-layer)

Dinex no. ID mm L m Wall thickness Bending Thermal resistance Dinex no. HP kW L mm Ø Inlet Outlet
INOX mm radius mm
95081 22 20 1,7 ~44 -40°C to +300°C ALU Ø
95084 24 20 1,7 ~48 -40°C to +300°C L
95088 30 20 1,7 ~60 -40°C to +300°C 49338 90-160 66-118 955 203 ID 66,0 ID 66,0
95094 38 20 1,7 ~76 -40°C to +300°C
95097 50 20 1,7 ~100 -40°C to +300°C
95096 70 10 1,7 ~140 -40°C to +300°C
Dinex no. HP kW L mm Ø Inlet Outlet

ALU Ø
L
49311 90-140 6 6-103 950 203 ID 66,0 ID 66,0
W
L
L
Dinex no. HP kW L mm WxL Inlet Outlet
W
ALU L
L
NOx Sensors 47300 90-160 66-118 810 180x277 ID 66,0 ID 90,5

NOx sensors

Dinex no. HP kW L mm WxL Inlet Outlet

Dinex no. OE reference Make Remarks ALU

51030 009.153.3628 / 006.153.7328 Mercedes 88312 90-160 66-118 510 202x302 ID 71,0 ID 66,0

81030 21244501 / 21473997 / 21567736 / 21984358 Volvo

81030 7421984358 / 7421531794 Renault

47030 51.15408.0009 / 81.15408.0000 / 81.15408.0004 MAN

29030 41271167 Iveco

67030 2020691 / 1908536 / 1872080 / 1782596 Scania

22030 1836059 / 1793378 / 1744683 DAF After catalyst

22031 1836060 / 1793379 / 1697586 DAF Before catalyst

38 going the extra mile 39

Universal Silencers Universal Silencers

Ø75-Ø80 / 90-240 HP (kW=HP/1,36) W Ø90-Ø115 / 90-250 HP (kW=HP/1,36)


Dinex no. HP kW L mm WxL Inlet Outlet Outlet Inlet Dinex no. HP kW L mm Ø Inlet Outlet
L
ALU ALU

28331 100-230 73-170 750 210x330 ID 77,0 OD 76,0 L 89390 90-250 66-184 1000 181 ID 90,0 ID 90,0 L

Outlet

Dinex no. HP kW L mm Ø Inlet Outlet Ø Dinex no. HP k W L mm Ø Inlet Outlet Inlet Ø
L L
ALU ALU

21335 90-230 66-170 850 263 ID 77,0 OD 88,9 89326 90-250 66-184 740 263 ID 89,5 OD 102,0

Inlet Outlet
L
Dinex no. HP kW L mm Ø Inlet Outlet Outlet Ø Dinex no. HP kW L mm Ø Inlet Outlet
L L
ALU ALU Inlet Ø
L W
16305 90-230 66-170 740 203 ID 77,0 ID 77,0 89456 90-250 66-184 920 234 ID 90,0 ID 115,5
L L
W
L
Dinex no. HP kW L mm Ø Inlet Outlet Ø Dinex no. HP kW L mm WxL Inlet Outlet Outlet L
L W
ALU ALU L
L L
15301 90-160 66-118 825 203 ID 77,0 ID 77,0 50337 90-200 66-147 1120 180X277 ID 90,5 OD 86,0
Ø
Inlet
Ø
Dinex no. HP kW L mm Ø Inlet Outlet Outlet Ø Dinex no. HP kW L mm WxL Inlet Outlet W
L
ALU ALU L

80316 90-160 66-118 585 246 ID 77,0 ID 77,0 50356 90-150 66-111 1060 180x277 ID 90,5 OD 71,0



Dinex no. HP kW L mm Ø Inlet Outlet Ø Dinex no. HP kW L mm WxL Inlet Outlet
L
ALU ALU

44337 90-140 66-103 830 246 ID 77,0 ID 90,5 50417 90-200 66-147 920 210x330 ID 90,5 OD 85,0

Outlet

Dinex no. HP kW L mm Ø Inlet Outlet Ø Dinex no. HP kW L mm Ø Inlet Outlet
L
ALU Inlet ALU

89466 90-160 66-118 540 297 ID 77,0 OD 75,0 21312 100-250 73-184 840 297 ID 90,5 OD 89,0

50399 160-250 120-184 1200 234 ID 90,5 ID 90,5

Outlet

Dinex no. HP kW L mm Ø Inlet Outlet Ø Dinex no. HP kW L mm Ø Inlet Outlet
L
ALU Inlet ALU Inlet

89497 90-160 66-118 540 263 ID 77,0 OD 75,0 80334 100-220 73-162 845 246 ID 90,5 ID 90,5

W

Dinex no. HP kW L mm WxL Inlet Outlet L Dinex no. HP kW L mm WxL Inlet Outlet
L
ALU ALU

49337 90-240 66-177 910 180x277 ID 81,0 ID 90,5 50425 170-240 125-177 1060 180X277 ID 90,5 OD 85,0

W

Dinex no. HP kW L mm WxL Inlet Outlet L
L
ALU

40 49368 90-240 66-177 994 1 80x277 ID 81,0 ID 90,5 going the extra mile 41







Universal Catalytic Converters Rain Caps

<3,5 Ltr. Catalytic Converter <3,5 Ltr. Accessories

Dinex no. Dinex no. Pipe OD Adapter ID Dinex no. Dinex no. Ø mm Inch

INOX INOX ZINC INOX

40315 40038 38,0 39,0 98450 98550 50,5 2 Ø
98460 98560 60,5 2 3/8
40050 50,0 51,0
98464 98564 63,5 2 1/2
Ø152 40057 57,0 58,0
98470 98570 70,5 2 3/4
40060 60,0 61,0
98476 98576 76,5 3
285 40063 63,5 64,5
98480 98580 80,5 3 1/8
40065 65,0 66,0
98489 98589 90,0 3 1/2
40070 70,0 71,0
98400 98500 100,5 3 7/8

98402 98602 102,0 4

98410 98608 110,5 4 3/8

98414 98614 115,0 4 1/2

3,5-8 Ltr. Catalytic Converter 3,5-8 Ltr. Accessories 98420 98620 120,5 4 3/4

98427 98627 127,5 5

Dinex no. Dinex no. Pipe OD Adapter ID 98451 98651 152,0 6

INOX INOX 98652 203,0 8

40316 40066 65,0 66,0

40076 75,0 76,0

40077 76,0 77,0

Ø206 40081 80,0 81,0 Dinex no. Ø mm Inch

40090 89,0 90,0 ZINC

40091 90,0 91,0 98445 45,0 1 3/4

300 40101 100,0 101,0 98452 50,0 2
98455 55,0 2 1/8
40102 101,6 102,5 Ø

98461 60,0 2 3/8

98465 65,0 2 5/8

98471 70,0 2 7/8

98475 75,0 3

8-14 Ltr. Catalytic Converter 8-14 Ltr. Accessories 98481 80,0 3 1/8

Dinex no. Dinex no. Pipe OD Adapter ID 98491 90,0 3 1/2

INOX INOX 98401 100,0 3 7/8

40300 40076 75,0 76,0 98411 110,0 4 3/8

40077 76,0 77,0 98415 115,0 4 1/2

40081 80,0 81,0 98421 120,0 4 3/4

Ø284 40090 89,0 90,0 98430 130,0 5 1/8

40091 90,0 91,0

40101 100,0 101,0

340 40102 101,6 102,5
440
40109 108,0 109,0

40111 110,0 111,0

40115 114,3 115,0

48 going the extra mile 49

VIP Systems - Identifying the VIP Systems - Identifying the
Correct VIP System Correct VIP System

For For For

silencer heat shield pipes

VIP Silencer Tail pipe Heat shield Clamp A Clamp B Clamp C

System (x2) (x2) (x2)

1/1 87376 91477 95580 98783 95885 99877

1/2 87376 91476 95681 98783 95885 99877

1/3 87377 91476 95681 98783 95885 99878

2/1 87389 80714 95580 98783 95885 99890

2/2 87389 91489 95681 98783 95885 99890

2/3 87390 91489 95681 98783 95885 99891

3/1 87402 91403 95549 98783 95885 99903

Choose VIP system according Ensure that the VIP pipe Select quality of 3/2 87402 91202 95650 98783 95885 99903
to the engine power output. diameter is the same or larger VIP materials.
than the original pipework. 3/3 87403 91202 95650 98783 95885 99904

4/1 87404 91403 95548 98782 95949 99903

4/2 87404 91202 95649 98782 95949 99903

Pipe in/outlet size 4/3 87405 91202 95649 98782 95949 99904

ID 3 inch ID 3½ inch ID 4 inch ID 4 inch ID 4½ inch ID 5 inch 5/1 87314 80647 95548 98782 95949 99915

(77 mm) (89,5 mm) (103 mm) (103 mm) (115 mm) (128 mm) 5/2 87314 91214 95649 98782 95949 99915

AL 1/1 2/1 3/1 4/1 5/1 6/1 5/3 87315 91214 95649 98782 95949 99916
Material AS 1/2 2/2 3/2 4/2 5/2 6/2
6/1 87327 91429 95548 98782 95949 99928

SS 1/3 2/3 3/3 4/3 5/3 6/3 6/2 87327 91426 95649 98782 95949 99928

-210 180-270 220-275 230-325 295-460 325-500 6/3 87328 91426 95649 98782 95949 99925

Engine Output Power (HP)

AL = All parts in aluminised steel
AS = Heat shield and tail pipe in stainless steel, other parts in aluminised steel
SS = All parts in stainless steel

50 going the extra mile 51

VIP Systems - Parts Specification VIP Systems - Accessories

Silencers ID
B
Dinex no. T mm T Inch L mm L Inch B mm B Inch I D mm ID Inch HP ØØ

87376 AL 927 36 1/2 800 31 1/2 184 7 1/4 77,0 3 -21 0

87377 SS 927 36 1/2 800 31 1/2 184 7 1/4 77,0 3 -21 0

87389 AL 927 36 1/2 800 31 1/2 184 7 1/4 89,5 3 1/2 180 -27 0
LL
87390 SS 927 36 1/2 800 31 1/2 184 7 1/4 89,5 3 1/2 180 -27 0 T
L
87402 AL 1145 45 965 38 184 7 1/4 104,0 4 220 -27 5 LambdaLarsen® Clamps for DPF Body Straps for DPF

87404 AL 1219 48 1041 41 249 9 3/4 104,0 4 230 -32 5 Dinex no. Ø mm Ø Inch Dinex no. Ø mm Ø Inch

87405 SS 1219 48 1041 41 249 9 3/4 104,0 4 230 -32 5 41873 155 5,66 95400 155 5,66

87314 AL 1219 48 1041 41 249 9 3/4 115,0 4 1/2 295 -46 0 42872 178 7,00 95402 178 7,00

87315 SS 1219 48 1041 41 249 9 3/4 115,0 4 1/2 295 -46 0 42881 184 7,00 95403 184 7,00

87327 AL 1219 48 1041 41 249 9 3/4 128,0 5 325 -50 0 42868 203 8,00 95401 206 8,00

87328 SS 1219 48 1041 41 249 9 3/4 128,0 5 325 -50 0 42813 249 9,00 95404 249 9,00

42814 284 10,50 95418 265 10,50

ID 42815 300 11,25 95405 284 10,50

Tail Pipes For Silencers (A) 42816 320 12,00 95406 300 11,25

Dinex no. L mm L Inch OD mm OD Inch Dinex no. ID mm I D Inch 42869 350 13,50 95407 320 12,00
98783 SS 184,0 7 1/4
91477 AL 1000 39 3/8 76,0 3 98782 SS 249,0 9 3/4 42817 400 15,00 95417 335 13,20

91476 SS 1000 39 3/8 76,0 3 ID 42818 448 17,50 95408 350 13,50

80714 AL 1220 48 89,5 3 1/2 42819 520 20,00 95409 400 15,00

91489 SS 1000 39 3/8 89,5 3 1/2 42850 247x357 9,7x14 95410 448 17,50

91403 AL 1500 59 101,6 4 95411 520 20,00

91202 SS 1500 59 101,6 4 95413 247x357 9,7x14

80647 AL 1450 57 114,3 4 1/2 OD 95414 296x711 11,6x28

91214 SS 1500 59 114,3 4 1/2 For Heat Shields (B)

91429 AL 1500 59 127,0 5 Dinex no. ID mm ID inch

91426 SS 1500 59 127,0 5 95885 SS 184,0 7 1/4

95421 SS 203,0 8

Heat Shields 95949 SS 249,0 9 3/4

Dinex no. L mm L Inch ID mm ID Inch 95948 SS 265,0 10 1/2

95580 AL 1000 39 3/8 214,0 8 3/8 ID

95681 SS 1000 39 3/8 214,0 8 3/8

95549 AL 1250 49 1/4 214,0 8 3/8 For Pipes (C)

95650 SS 1250 49 1/4 214,0 8 3/8 Dinex no. ID mm I D Inch Grab Handles
99877 AL 80,0 3
95652 SS 1250 49 1/4 279,0 9 3/4 99878 SS 80,0 3 Dinex no. For heat shield
99890 AL 93,5 95800 95580
95548 AL 1250 49 1/4 279,0 11 ID 99891 SS 93,5 3 1/2 95800 95681
99903 AL 106,0 3 1/2 95801 95549
95649 SS 1250 49 1/4 279,0 11 99904 SS 106,0 95801 95650
99915 AL 118,0 4 95801 95548
99916 SS 118,0 4 Support Mast 95801 95649
99928 AL 132,0 4 1/2 95801 95716
99925 SS 132,0 4 1/2 Dinex no. 95801 95717
5
5 95511 Kit

52 going the extra mile 53

Vertical Outlet Pipe Systems Vertical Outlet Pipe Systems

A A
L L

100 100

600 600 Ø
400
Ø
400 Systems with Heat Shield 1200 mm - ZINC

Systems with Heat Shield 800 mm - ZINC System Ø L mm A mm Tail Pipe Bend Clamp Cross bar
Dinex no. Dinex no. Dinex no. Dinex no. Dinex no.
System Ø L mm Heat shield A mm Tail Pipe Bend Clamp Cross bar 95590 100 1500 1200 91601 91600 99700 95502
95592 100 2000 1200 91602 91600 99700 95502
Dinex no. Dinex no. Dinex no. Dinex no. Dinex no. Dinex no. 95594 100 2250 1200 91603 91600 99700 95502
95596 120 1500 1200 91621 91620 99720 95502
95611 80 1500 800 91681 91680 99780 95502 95598 120 2000 1200 91622 91620 99720 95502
95600 120 2250 1200 91623 91620 99720 95502
95612 80 2000 800 91682 91680 99780 95502
Systems with Heat Shield 1200 mm - INOX
95613 80 2250 800 91683 91680 99780 95502
System Ø L mm A mm Tail Pipe Bend Clamp Cross bar
95602 90 1500 95589 800 91691 91690 99789 95502 Dinex no. Dinex no. Dinex no. Dinex no. Dinex no.
95591 100 1500 1200 91601 91600 99700 95502
95603 90 2000 95589 800 91692 91690 99789 95502 95593 100 2000 1200 91602 91600 99700 95502
95595 100 2250 1200 91603 91600 99700 95502
95604 90 2250 95589 800 91693 91690 99789 95502 95597 120 1500 1200 91621 91620 99720 95502
95599 120 2000 1200 91622 91620 99720 95502
95608 100 1500 95503 800 91601 91600 99700 95502 95601 120 2250 1200 91623 91620 99720 95502

95609 100 2000 95503 800 91602 91600 99700 95502

95610 100 2250 95503 800 91603 91600 99700 95502

95605 120 1500 95521 800 91621 91620 99720 95502

95606 120 2000 95521 800 91622 91620 99720 95502

95607 120 2250 95521 800 91623 91620 99720 95502

95617 130 2250 95522 800 91624 91625 99730 95502

Systems with Heat Shield 1000 mm - INOX

System Ø L mm Heat shield Clamp A mm Tail Pipe Bend Clamp Cross bar

Dinex no. Dinex no. Dinex no. Dinex no. Dinex no. Dinex no. Dinex no.

95615 101,6 2000 95532 95802 1000 91604 91605 99702 95502

95616 127,0 2000 95627 95827 1000 91627 91628 99702 95502

54 going the extra mile 55





Standard Modules Baffle Size Standard Modules Baffle Size

Diameter 152 mm / 5,66" Diameter 152 mm / 5,66"
Lambda Larsen® connection

Filter Modules

Center Dinex no. Type Ø mm L mm Inch kW Clamp type
LL
Dinex no. Ø mm L mm L2 m ID/OD Ø (D2) mm 980781 DiPEX® 152 191,4 6” 20-30 LL
LL
980791 152 130 60 OD 76,1 981059 DiSiC® 152 191,4 6” 20-30 V-Clamp Ø
981358* 152 130 60 ID 77,0
ØD2 Ø 982324 DiSiC® cat 152 191,4 6” 20-30
L
* pop-nuts for temp./BP 982275 DiPEX® 152 191,4 6" 20-30 L
CØ
Off-Center L2 L Acoustic Module Slipring Module (LL)
L2
Dinex no. Ø mm L mm L2 mm ID/OD Ø (D2) mm C mm Dinex no. Ø mm L mm Clamp type Dinex no. Ø mm L mm Ø
Ø 981032 152 50
981923* 152 149 50,0 ID 48,3 11/5 981006 152 191,4 - 6” LL

981041** 152 177 74,5 OD 51,0 20/20 ØD2 982177 152 242,2 - 6" LL L
L
981042* 152 177 60,0 ID 51,5 20/20 983094 152 242,2 - 6" V-Clamp

980775 152 130 60,0 ID 65,0 22,50

980777 152 130 60,0 ID 65,0 22,50

* pop-nuts for temp./BP, ** outlet module LambdaLarsen® Body Strap
Clamp (LL)
Ø Dinex no. Ø mm Ø

Side Dinex no. Ø mm 95400 152

D2 41873 152
L2
Dinex no. Ø mm L mm L2 mm ID/OD Ø (D2) mm L3 mm
Ø
980782 152 130 105,0 OD 40,0 65,0
L3
981954* 152 100 126,5 OD 42,3 54,0 L V-Clamp Gasket

981684* 152 149 144,5 OD 50,0 74,5 Dinex no. Ø mm Dinex no. Ø mm
152
981472* 152 118 131,0 OD 54,0 59,0 78836 Ø Ø

* pop-nuts for temp./BP 98958 152

Ring Pre-cat Module

Dinex no. Ø mm Ø Dinex no. Clamp type
152
98959 981239 LL

981275 V-Clamp

Conus

Dinex no. Ø mm L mm Type L2 mm ID/OD Ø (D2) mm Clamp type

981345 152 139 Center 36,7 OD 63,5 LL Ø D2

981406 152 137 Center 36,7 ID 64,0 LL L2
L
981429 152 143 Center 36,7 ID 51,0 LL

982152 152 139 Center 36,7 OD 63,5 LL

60 going the extra mile 61

Standard Modules Baffle Size Standard Modules Baffle Size

Diameter 203 mm / 7,5" Diameter 203 mm / 7,5"
Lambda Larsen® connection
Filter Modules

Center Dinex no. Type Ø mm L mm Inch kW Clamp type

980744 DiPEX® 203 242,2 8" 40-70 LL Ø

Dinex no. Ø mm L mm L2 mm ID/OD Ø (D2) mm 980556 DiPEX® 203 343,8 12" 65-100 LL

984021* 203 135,0 75 ID 60,5 ØD2 Ø 981168 DiSiC® 203 242,8 8" 40-70 LL L
980722* 203 127,0 60 OD 76,1
982341 DiSiC® 203 343,8 12" 65-100 LL

981661* 203 127,0 60 OD 76,1 982326 DiSiC® cat 203 242,8 8" 40-70 LL

981398* 203 164,5 70 ID 77,0 L2 L 982328 DiSiC® cat 203 343,8 12" 65-100 LL

981625* 203 127,0 60 ID 102,5 982435 DiSiC® cat 203 242,8 8" 40-70 V-Clamp

981626* 203 127,0 60 OD 114,3 982436 DiSiC® cat 203 293,0 10" 50-80 V-Clamp

* pop-nuts for temp./BP 982437 DiSiC® cat 203 343,8 12" 65-100 V-Clamp

982276 DiPEX® 203 242,8 8" 40-70 V-Clamp

Off-Center 982277 DiPEX® 203 343,8 12" 65-100 V-Clamp

Dinex no. Ø mm L mm L2 mm ID/OD Ø (D2) mm C mm CØ Acoustic Modules
982043* 203 127 76,0 OD 50,8 50 ØD2
982259* 203 150 50,0 ID 58,0 35 Dinex no. Ø mm L mm Inch Clamp type

981891 203 130 75,5 ID 64,5 45 980558 203 242,7 8” LL Ø
L
981889* 203 130 75,5 ID 64,5 45 L2 L 980555 203 343,8 12” LL
981351* 203 130 59,5 ID 65,0 40
983093 203 343,8 12" V-Clamp

981649* 203 130 60,0 OD 76,2 25

981350* 203 130 60,0 ID 77,0 25 Pre-cat Modules V-Clamp

* pop-nuts for temp./BP Dinex no. Clamp type L mm Ø Dinex no. Ø mm Ø
120
981240 LL 120 78829 203 Ø
Ø
Side 981276 V-clamp
Ø
Dinex no. Ø mm L mm L2 mm ID/OD Ø (D2) mm L3 mm D2 L Body Strap
D2
982090* 203 126 173 OD 43,0 70 Dinex no. Ø mm L2
981997* 203 100 135 OD 50,0 52 L
981759* 203 127 150 OD 50,0 67 L2 Slipring Module (LL) 95401 203

Ø Dinex no. Ø mm L mm Ø

982042 203 130 172 OD 50,8 75 981052 203 50 Gasket

981984 203 100 150 OD 57,0 52 L3 Dinex no. Ø mm

981882 203 130 173 OD 63,5 70 L L 98910 203
980799 203 135 150 ID 64,5 67 Ø
LambdaLarsen®
980830* 203 126 173 OD 76,1 75 Clamp (LL) Ring

980831* 203 130 173 ID 77,0 75 Dinex no. Ø mm Dinex no. Ø mm
203
982089* 203 158 173 OD 88,9 89 42868 203 98939

981403 203 165 177 ID 102,5 90

985307* 203 170 177 ID 115,0 92 Conus

* pop-nuts for temp./BP Dinex no. Ø mm L mm Type L2 mm ID/OD Ø (D2) mm Clamp type

981517 203 167 Center 44 OD 63,5 LL Ø

982093 203 167 Center 44 OD 63,5 LL

98000270 203 165 Center 44 ID 62,5 V-Clamp

98000817 203 165 Center 44 ID 58,0 V-Clamp

98000759 203 165 Center 44 ID 62,0 V-Clamp

98000757 203 165 Center 44 ID 60,5 V-Clamp

62 going the extra mile 63









Standard Modules Baffle Size Standard Modules Baffle Size

Diameter 397 mm / 15" Diameter 397 mm / 15"
Lambda Larsen® connection

Center Filter Modules

Dinex no. Ø mm L mm L2 mm ID/OD Ø (D2) mm Dinex no. Type Ø mm L mm Inch kW Clamp type Ø

985066* 397 190 80 OD 114,3 980786 DiPEX® 397 420 15” 330-475 LL

985166* 397 190 80 ID 115,0 ØD2 Ø 982352 DiSiC® 397 293 10” 300-335 LL
L2
982113* 397 400 110 ID 115,0 982349 DiSiC® 397 420 15” 330-475 LL L

985069* 397 190 80 OD 127,0 982351 D iSiC® cat 397 293 10” 300-335 LL

985169* 397 190 80 ID 128,0 L 982339 D iSiC® cat 397 420 15” 330-475 LL

981713* 397 210 80 ID 128,5 982284 DiPEX® 397 420 15" 330-475 V-Clamp

982690* 397 150 100 OD 139,7

982692** 397 150 100 OD 139,7 Acoustic Module (LL)

981297 397 290 90 OD 139,7 Dinex no. Ø mm L mm Inch Clamp type

* pop-nuts for temp./BP, ** outlet module 981013 397 420 15” LL Ø
L
983016 397 420 15" V-Clamp

Off-Center ØD2 CØ

Dinex no. Ø mm L mm L2 mm ID/OD Ø (D2) mm C mm Pre-cat Module Slipring Module (LL)

985070* 397 190 80 OD 127 100 Dinex no. Clamp type L mm Dinex no. Ø mm L mm Ø
120 Ø 981160 397 50 L
* pop-nuts for temp./BP 120

L2 L 983939 LL

983941 V-clamp

Side D2 L
L2
Dinex no. Ø mm L mm L2 mm ID/OD Ø (D2) mm L3 mm
Ø
980666** 397 170 264,0 OD 114,3 89 LambdaLarsen® Body Strap
L3 Clamp (LL)
981761 397 190 270,0 OD 122,0 90 L Dinex no. Ø mm Ø

985310* 397 240 246,7 OD 122,0 112 Dinex no. Ø mm Ø 95409 397

985071 397 190 284,8 OD 127,0 96 42817 397

981527* 397 265 290,0 ID 128,0 144

* pop-nuts for temp./BP, ** inlet = flared end Gasket

V-Clamp Dinex no. Ø mm Ø
397
Dinex no. Ø mm Ø 98925
397
78822

Ring Ø mm Ø
397
Dinex no.

98926

72 going the extra mile 73

Standard Modules Baffle Size Standard Modules Baffle Size

Diameter 445 mm / 17" Diameter 518 mm / 20"
Lambda Larsen® connection

Off-Center Center

Dinex no. Ø mm L mm L2 mm ID/OD Ø (D2) mm

Dinex no. Ø mm L mm L2 mm ID/OD Ø (D2) mm C mm ØD2 CØ 984424* 518 225 80 ID 160,5 ØD2 Ø
L2
985189* 445 140 75 ID 102 158 980982 518 225 81 OD 220,0

980511 445 122 80 OD 127 125 * pop-nuts for temp./BP

* pop-nuts for temp./BP L

L2 L

D2 Off-Center
L2
Side Dinex no. Ø mm L mm L2 mm ID/OD Ø (D2) mm C mm ØD2 CØ
Ø Ø
Dinex no. Ø mm L mm L2 mm ID/OD Ø (D2) mm L3 mm 981703* 518 200 95 128 165/60 Ø
L3
985193 445 170 274,0 ID 115 75 L 981897* 518 200 95 128 162/60

985077 445 190 304,0 OD 127 95 * pop-nuts for temp./BP

985177* 445 190 304,0 ID 128 95 L2 L

980723* 445 230 256,7 OD 147 115 D2
L2
* pop-nuts for temp./BP Side
L3
Dinex no. Ø mm L mm L2 mm ID/OD Ø (D2) mm L3 mm

981896 518 350 290 Ø127 Male V-clamp 160,0

LambdaLarsen® 981702* 518 350 290 Ø127 Male V-clamp 160,0
Clamp (LL)
984425 518 225 370 ID 160,5 112,5

Dinex no. Ø mm Ø * Volvo type flange

42818 445 L

Filter Modules

Dinex no. Type Ø mm L mm Inch kW Clamp type

Body Strap 980787 DiPEX® 518 420 15” 400-500 LL

Dinex no. Ø mm Ø L
Ø
95410 445 Acoustic Module
L
Dinex no. Ø mm L mm Inch Clamp type

981014 518 420 15” LL

983001 518 420 15" V-Clamp

LambdaLarsen® Body Strap
Clamp (LL)
Dinex no. Ø mm

Dinex no. Ø mm Ø 95411 518 Ø

42819 518

V-Clamp Ø mm Ø Gasket Ø mm Ø
518 518
Dinex no. Dinex no.

78812 98912

Ring Ø mm Ø
518
Dinex no.

98951

74 going the extra mile 75

D2

Special Modules with Special Modules L3
Bended Pipe & Brackets Ø

Lambda Larsen® connection

Lambda Larsen® connection L2
L

Side In/Outlet with V-Clamp Flange

Dinex no. Ø mm L mm Type L2 mm ID/OD Ø Displacements Dinex no. Ø mm L mm Flange L2 mm ID/OD Ø Displacements

(D2) mm (L3/L4) mm (D2) mm (L3) mm

980850** 203 154 ,0 Side 235,0 OD 6 3,5 57,0 985192 246 155,0 F emale 67,5 OD 76,1 152

981103* 297 170,0 Side 250,0 O D 10 9,0 85,0 981672*** 281 170,0 M ale 85 ,0 OD 101,6 225

980913** 247x357 100,0 Of f-cen ter OD 1 29,0 90,0 981792** 281 170,0 M ale 85 ,0 OD 114,3 171

981982* 317 291,0 Side 260,0 ID 1 15,0 169,0 981485* 281 185,0 M ale 92 ,5 OD 127,0 206

981375* 246 283,0 Side 261,0 OD 7 6,1 146,5 981747* 297 193,0 M ale 67 ,5 OD 127,0 200

981101** 281 416,5 O ff-ce nter 95,0 OD 8 0,0 20,0 981305* 317 140,0 M ale 60 ,0 OD 127,0 220

980975* 203 266,0 S ide ID 50,0 204,5 981470*** 317 145,0 M ale 82 ,5 OD 127,0 247

980874** 297 500,0 O ff-ce nter 155,0 O D 11 4,3 60,0 981519* 317 155,0 M ale 67 ,5 OD 127,0 210

981766** 397 290,0 Sid e (ou tlet) 392,6* OD 12 7,0 119,5 980673* 397 295,0 M ale 85,0 OD 114,3 269

* pop-nuts for temp./BP, ** outlet module 980526*** 445 294,0 M ale 11 3,0 OD 114,3 269

980640**** 445 339,0 M ale 84 ,5 OD 114,3 269

D2 980498* 445 154,5 M ale 71,0 OD 127,0 263

981960* 445 155,0 M ale 71,0 OD 127,0 263

D2 D2 * pop-nuts for temp./BP, ** dome, *** pop-nuts fo r temp./BP/ inlet module and dome, **** pop-nuts for temp./BP/ inlet module and dome + pre-cat
L2 L4
L2 Ø Ø L3 D2
Ø L 980913 Ø
L3
L3 980850 L 981103
L
D2
Center/Off-Center with V-Clamp Flange L2 L

Dinex no. Ø mm L mm Flange Spec. L2 mm ID/OD Ø Displacements

D2 (D2) mm (L3) mm

L2 L2 D2 981378* 281 208,8 Male Of f-cen ter 35,0 O D 101,6 6 6,0
Ø L2 L
981791** 297 150,0 Male Cen ter/D ome 43,5 OD 114,3

Ø * pop-nuts for temp./BP (off center inlet), ** pop-nuts for temp./BP (center inlet, dome)
981101
L3 981982 L3 Ø Special Modules with Bended Pipe
L L 981375

Dinex no. Ø mm L mm Type L2 mm ID/OD Ø Displacements

34,5 (D2) mm (L3) mm (L4) mm
981915* 152 149 Side in/o ut ID 48,3 74,5 141,0 D2

D2 L3 981683* 152 149 Cen ter 64,8 O D 53,0 157,7 L4
Ø L4 Ø 981758* 203 127 Cen ter 86,6 OD 53,0 144,0

Ø 981766 981769* 203 127 Off- cent er 130,0 O D 53,0 5 4,5 Ø
980874 D2
981867* 203 127 Cen ter 64,8 OD 53,0 174,0 L3
* Distance from center of module L
L3 D2 L2 L to the edge of the tail pipe. 981777* 203 127 Cen ter 91,6 OD 53,0 174,0
L 981902* 246 110 Side in/o ut 65,0 177,0
980975 ID 60,0 45,0 L2

981906* 246 115 Side in/ou t 119,1 OD 60,0 16,4 203,0

985191* 246 125 Off- cent er 171,0 O D 76,1 46/40,0 256,0

980801* 297 170 Side in/o ut 176,8 OD 101,6 85,0 235,0

980516* 297 195 Side in/o ut 85,0 OD 102,0 112,0 233,0

* pop-nuts for temp./BP

76 going the extra mile 77

Special Modules ØD ØD2 Special Modules & Mounting Brackets
L4
Lambda Larsen® connection L3 Lambda Larsen® connection
L2
L

Pre-Cat Modules / Special Pre-Cat Special Side Modules with 2 Pipes

Dinex no. Ø mm L mm Filter Filter type Type L2 mm Dim Ø mm Side cut Off-center Dinex no. Ø mm L mm L2 mm ID/OD Ø Side out D2
L2
size inch mm Dim. mm Dim. mm (D2) Dim. mm (L3)
Ø
(D2) (L3) (L4) 981159* 297 225 215 ID 77,0 160,0
L3
980662* 203 270,0 7,5x4,0 Pr e-cat modu le Cen ter 60 ID 71,0 983484** 317 225 240 ID 88,9 149,0 L

981552 203 243,0 7,5x4,0 Pr e-cat 983487** 317 225 240 ID 101,6 149,0

980783* 246 343,5 9,0x4,0 Pr e-cat modu le Cen ter 80 ID 77,0 983482** 317 225 215 ID 102,0 149,0

985201* 246 388,0 9,0x4,0 Pr e-cat modu le Off -cent er 80 ID 90,5 55,0 983489** 317 225 340 ID 102,0 149,0

980521* 281 300,0 10,5x4,0 Pr e-cat modu le Off -cent er 60 ID 81,0 45/48 983485** 317 300 244 ID 119,0 92,5

980691* 281 420,0 10,5x4,0 Pr e-cat modu le Cen ter 80 ID 102,5 983492* 397 250 386 OD 101,6 125,0

981951 281 343,0 10,5x4,0 Pr e-cat 983490* 397 250 360 ID 114,3 125,0

981243 281 120,0 10,5x4,0 Pr e-cat * pop-nuts for temp./BP, ** pop-nuts for temp./BP/ intent module and dome

985285 281 370,0 10,5x4,0 Pr e-cat

985314* 281 370,0 10,5x4,0 Pr e-cat modu le Off -cent er 80 ID 90,0 75,0 Special Off-Center Module with 2 Pipes

980576* 297 230,0 11,25x4,0 P re-ca t mo dule Off-c enter 85 ID 90,0 54,5 Dinex no. Ø mm L mm L2 mm ID/OD Ø Off-center D2
C
980613 297 350,0 11,25x4,0 P re-ca t mo dule Cente r 75 ID 111,0 (D2) Dim. mm C

981220 297 131,0 11,25x4,0 Pr e-cat 980717 297 170 60 OD 76,1 88 Ø

980867 317 125,0 11,25x4,0 Pr e-cat 983480* 317 170 80 OD 88,9 80

981414 397 122,0 11,25x4,0 Pr e-cat 983486* 317 170 59 OD 101,6 80 D2
L2 L
980667 397 295,0 11,25x4,0 Pr e-cat modu le Sid e in/ out 26 9 OD 114,3 210,0 983491 317 170 75 OD 101,6 90

980640* 445 339,0 11,25x4,0 Pr e-cat mod ule S ide in /out 269 OD 114,3 254,5 983488 397 170 59 OD 101,6 80

* pop-nuts for temp./BP * pop-nuts for temp./BP

Side Modules with Flange D2
L3
Dinex no. Ø mm L mm Spec. Flange type Type L2 mm Dim Ø Side cut
D
mm Dim. mm
L
(D2) (L3) L2

981998* 203 100 Fl ange Squa red Side in/ou t 127 OD 50,0 52,5 Mounting Bracket Mounting Bracket Mounting Frames

981985* 203 100 Fl ange Squa red Side in/ou t 141 OD 57,0 52,5 Dinex no. Model Dinex no. Model Dinex no. Ø mm
88884 Scania 94-144 41839 MAN F2000 98612 281
981196* 246 170 Fl ange Squa red Side in/ou t 175 OD 88,9 85,0 98609 297
Mounting Bracket Universal Bracket 98610 317
981259* 246 170 Fl ange/ Opac ity Squa red Side in/ou t 175 OD 88,9 85,0 98611 397
Dinex no. Model Dinex no. Model
980515* 297 255 Fl ange Roun d Side in/ou t 195 OD 101,6 170,0 42924 MB Actros 41846 Universal

980796 297 190 Fl ange Squa red Side in/ou t 215 OD 101,6 110,0

* pop-nuts for temp./BP

Outlet Pipe

Dinex no. ID/OD Ø

69620 ID 102,5

78 going the extra mile 79





Notes Notes





































84 going the extra mile 85

Notes





































86

Make contact www.dinex.dk

We are ready to serve you – please contact us! Spain
Dinex Ibérica
Sales & Distribution Italy Sistemas de Escape S.L.
Dinex Italia S.r.l.
Serbia Ctra. de Torrelles, Nave 42
Dinex Balkan D.O.O. Zona Art.-Industriale E-08620 Sant Vicenç Dels Horts
IT-64020 Colleranesco Barcelona
Ive Lole Ribara 65 Giulianova (TE) Tel +34 93 656 81 40
21203 Veternik Tel +39 085 8028693 Fax +34 93 656 01 00
Tel +381 21 310 10 26 Fax +39 085 8028692 [email protected]
[email protected] [email protected]
United Kingdom
France Poland Dinex Exhausts Ltd.
Dinex France S.A.S. Dinex Polska Sp. z o.o.
14 Chesford Grange
6, rue des Malines ul. Starowiejska 11 Woolston, Warrington
F-91090 Lisses PL-80-180 Kowale k/Gdanska Cheshire WA1 4RE, UK
Tel +33 1 69 11 88 00 Tel +48 58 712 66 55 Tel +44 1925 849 849
Fax +33 1 69 11 88 01 Fax +48 58 712 66 65 Fax +44 1925 849 850
[email protected] [email protected] [email protected]

Germany
Dinex GmbH

Gewerbestrasse 3-5
D-36148 Kalbach
Tel +49 180 225 1125
Fax +49 6655 918 601
[email protected]

Production, Sales & Distribution

Denmark Turkey China
Dinex A/S Dinex Egzoz ve Emisyon Dinex Emission System
Teknolojileri San. ve Tic. AS (Changzhou) Co., Ltd.
Fynsvej 39
DK-5500 Middelfart Kızılpınar Yolu Building 9, No.2, Teng Long Road
Tel +45 63 41 25 00
Fax +45 63 41 25 25 Özcanlar Tekstil Yanı Wujin Economic Zone, Changzhou
[email protected]
59500 Çerkezköy Tekirdag, Turkey Jiangsu Province
Latvia
Dinex Latvia SIA Tel +90 282 736 4040 Tel +86 519 8108 5931

Rubenu cels 58, Raubeni Fax +90 282 727 4041 Fax +86 0519 8129 2586
Ozolnieku nov. LV-3002
Tel +371 63020200 [email protected] [email protected]
Fax +371 63020059
[email protected] United Kingdom USA
Dinex Clamps Ltd. Dinex Emission Inc.
Russia
Dinex RUS LLC Foxfields Farm 2020 Waldrep Industrial Blvd.
Whalley Road, Stonyhurst
Section 1, Ground 4, Clitheroe BB7 9PN, UK Dublin, GA 31021
188300 Gatchina, Promzona-1, Tel +44 1254 826 000
Leningradskaya oblast Fax +44 1254 826 080 Tel +1 478 272 2466
Tel +78 126 104 007 [email protected]
Fax +78 137 191 855 Fax +1 478 272 2491
[email protected] Finland
Dinex Ecocat Oy [email protected]

P.O. Box 20 (Vihtavuorentie 162) Head Office
FIN-41331 Vihtavuori Denmark
Tel +358 10 65351 Dinex A/S
Fax +358 6535000 Fynsvej 39
[email protected] DK-5500 Middelfart
Tel +45 63 41 25 00
going the extra mile Fax +45 63 41 25 25 12315 | 01 | 3214 | EN
[email protected]
All drawings & illustrations are the property right of Dinex and cannot be copied,
duplicated or re-printed in any form without the prior written consent from Dinex.