Fluid Fitting 2018_extended

Fluid Fittings & Fluid Steels
Branding / Logo Usage Guide
The logo(s) should be used as supplied without modification.
Various formats are available upon request to suit all applications.
The following guidelines are to identify the logo makeup and are NOT to be used to recreate the logo except where express
permission has been given to do so.
INDEPENDANT LOGO USAGE
FLUID FITTINGS LOGO
COLOUR - Prefered Option
F
Fittings
The word “FLUID” - Franklin Gothic Heavy
The word “Fittings” - Helvetica Neue Light
The “F” device - Min Round
The colour breakdown for various uses is as follows:
Spot:
Red - PMS 485
Black - Pantone Black
CMYK:
Black
Red
Red
R: 255
C: 0
C: 0
R: 0
G: 0
M: 0
M: 100
G: 0
B: 0
B: 0
Y: 100
Y: 0
K: 100
K: 0 F FLUID RGB: Black
BLACK / GREYSCALE VERSION
F Fittings
HIGH QUALITY PRODUCTS F FLUID
EXCELLENCE IN SERVICE
If necessary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:
Spot:
SECTION I
Black - Pantone Black
Grey - Cool Grey 10
CMYK:
Grey Black RGB:

Swivels C: 0 Red Black
C: 0
M: 0 M: 0 R: 75 R: 0
Y: 0 Y: 0 G: 75 G: 0
K: 70 K: 100 B: 75 B: 0
TABLE OF CONTENTS
Techni-Turn 90° Stainless Steel Rotary Elbows Page I2
Techni-Turn 90° Steel Swivel Elbows Page I6
Water Blaster Straight Swivels Page I9
Steel Hot Bitumen Straight Swivels Page I10

Hydraulics Inc. Steel High Pressure Straight Swivels Page I11





Hydraulics Inc. Steel 3000psi Straight Swivels Page I13






Hydraulics Inc. Steel 3000psi 90° Swivels Page I16











IMPORTANT NOTE:



Swivels should not be subject to undue side loading.


Care must be taken with the design of the pipework / hosing to
ensure this does not happen.
I1

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

TECHNI-TURN STAINLESS STEEL

90° ROTARY ELBOW









PRODUCT SPECIFICATION


The Techni-turn 90 degree Rotary Elbow is manufactured from 316 stainless steel and
combined with the right seals and shaft support can be used for a very wide variety of fluid
transfer applications. See ‘ALTERNATIVE SEALS & BEARINGS’ on page I4.


Standard threads are BSPP Female & BSPT Male.

Working Pressure: Sizes 1/4” - 1” - 275 bar
Sizes 1.1/4” - to 1.1/2” - 206 bar







































Size HEX. C BODY D DIM. E DIM. F

1/4” & 3/8” 7/8” AF 28.5mm Sq. 43mm 62mm
1/2” 1.1/8” AF 38.0mm Sq. 56mm 79mm
3/4” 1.3/8” AF 48.5mm Sq. 70mm 89mm
1” 1.3/4” AF 53.5mm Sq. 80mm 102mm
1.1/4” 2” AF 58.0mm Sq. 83mm 102mm
1.1/2” 56mm AF 63.0mm Sq. 91mm 120mm



***NOTE** See Page I19 for technical details



I2

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

TECHNI-TURN STAINLESS STEEL
90° ROTARY ELBOW





The techni-turn stainless steel 90° rotary elbow can be ordered in four different configurations
as detailed below.




STANDARD CONFIGURATION FEMALE FEMALE CONFIGURATION

• Female Body BSPPF • Female Body BSPPF
• Male Shaft BSPT • Female Shaft BSPPF
• PETP Bush • PETP Bush
• Nitrile Seals • Nitrile Seals


Part No SIZE Working Part No SIZE Working
(“) Pressure (Bar) (“) Pressure (Bar)
SS-RE-0404-STD 1/4 275 SS-RE-0404-FF 1/4 275
SS-RE-0606-STD 3/8 275 SS-RE-0606-FF 3/8 275
SS-RE-0808-STD 1/2 275 SS-RE-0808-FF 1/2 275
SS-RE-1212-STD 3/4 275 SS-RE-1212-FF 3/4 275
SS-RE-1616-STD 1 275 SS-RE-1616-FF 1 275
SS-RE-2020-STD 1.1/4 206 SS-RE-2020-FF 1.1/4 206
SS-RE-2424-STD 1.1/2 206 SS-RE-2424-FF 1.1/2 206



REVERSE CONFIGURATION MALE MALE CONFIGURATION


• Male Body BSPT • Male Body BSPT
• Female Shaft BSPPF • Male Shaft BSPT
• PETP Bush • PETP Bush
• Nitrile Seals • Nitrile Seals


Part No SIZE Working Part No SIZE Working
(“) Pressure (Bar) (“) Pressure (Bar)
SS-RE-0404-REV 1/4 275 SS-RE-0404-MM 1/4 275
SS-RE-0606-REV 3/8 275 SS-RE-0606-MM 3/8 275
SS-RE-0808-REV 1/2 275 SS-RE-0808-MM 1/2 275
SS-RE-1212-REV 3/4 275 SS-RE-1212-MM 3/4 275
SS-RE-1616-REV 1 275 SS-RE-1616-MM 1 275
SS-RE-2020-REV 1.1/4 206 SS-RE-2020-MM 1.1/4 206
SS-RE-2424-REV 1.1/2 206 SS-RE-2424-MM 1.1/2 206





See page I4 for information on ordering the swivels with alternative seals and bearings.







I3

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

TECHNI-TURN STAINLESS STEEL

90° ROTARY ELBOW


Alternative Seals and Bearings



The Techni-turn 90° stainless steel rotary elbows can be
supplied with alternative seals and bearings.


To order these alternatives, we have used the example of a
SS-RE-0404-STD to demonstrate how the part numbers are
changed when ordering alternative seals and bearings.








Part No SEAL SHAFT

MATERIAL SUPPORT

SS-RE-0404-STD Nitrile PETP Bushes


SS-V-RE-0404-STD Viton Teflon Bushes

SS-E-RE-0404-STD EPR Teflon Bushes

SS-B-RE-0404-STD Nitrile Ball Bearings


SS-BV-RE-0404-STD Viton Ball Bearings

SS-BE-RE-0404-STD EPR Ball Bearings







Repair Kits


The Stainless Steel 90 degree Rotary Elbow Repair Kit consists of:
• 2 x Main ‘O’ Rings.
• 2 x Teflon Backup Washers.
• 2 x Bushes (or Bearings).
• 1 x 316 SS Circlip.




***NOTE** See adjacent table on I5 for Repair Kit part numbers.










I4

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

TECHNI-TURN STAINLESS STEEL
90° ROTARY ELBOW REPAIR KITS








Rotary Seal Shaft
Part No Elbow Size (“) Material Support
SSRK-RE-0406 1/4 & 3/8 Nitrile PETP bush
SSRK-RE-0808 1/2 Nitrile PETP bush
SSRK-RE-1212 3/4 Nitrile PETP bush
SSRK-RE-1616 1 Nitrile PETP bush
SSRK-RE-2020 1.1/4 Nitrile PETP bush
SSRK-RE-2424 1.1/2 Nitrile PETP bush

SSRK-V-RE-0406 1/4 & 3/8 Viton Teflon Bush
SSRK-V-RE-0808 1/2 Viton Teflon Bush
SSRK-V-RE-1212 3/4 Viton Teflon Bush
SSRK-V-RE-1616 1 Viton Teflon Bush
SSRK-V-RE-2020 1.1/4 Viton Teflon Bush
SSRK-V-RE-2424 1.1/2 Viton Teflon Bush

SSRK-E-RE-0406 1/4 & 3/8 EPR Teflon Bush
SSRK-E-RE-0808 1/2 EPR Teflon Bush
SSRK-E-RE-1212 3/4 EPR Teflon Bush
SSRK-E-RE-1616 1 EPR Teflon Bush
SSRK-E-RE-2020 1.1/4 EPR Teflon Bush
SSRK-E-RE-2424 1.1/2 EPR Teflon Bush

SSRK-B-RE-0406 1/4 & 3/8 Nitrile Sealed Ball Bearing
SSRK-B-RE-0808 1/2 Nitrile Sealed Ball Bearing
SSRK-B-RE-1212 3/4 Nitrile Sealed Ball Bearing
SSRK-B-RE-1616 1 Nitrile Sealed Ball Bearing
SSRK-B-RE-2020 1.1/4 Nitrile Sealed Ball Bearing
SSRK-B-RE-2424 1.1/2 Nitrile Sealed Ball Bearing


SSRK-BV-RE-0406 1/4 & 3/8 Viton Sealed Ball Bearing
SSRK-BV-RE-0808 1/2 Viton Sealed Ball Bearing
SSRK-BV-RE-1212 3/4 Viton Sealed Ball Bearing
SSRK-BV-RE-1616 1 Viton Sealed Ball Bearing
SSRK-BV-RE-2020 1.1/4 Viton Sealed Ball Bearing
SSRK-BV-RE-2424 1.1/2 Viton Sealed Ball Bearing


SSRK-BE-RE-0406 1/4 & 3/8 EPR Sealed Ball Bearing
SSRK-BE-RE-0808 1/2 EPR Sealed Ball Bearing
SSRK-BE-RE-1212 3/4 EPR Sealed Ball Bearing
SSRK-BE-RE-1616 1 EPR Sealed Ball Bearing
SSRK-BE-RE-2020 1.1/4 EPR Sealed Ball Bearing
SSRK-BE-RE-2424 1.1/2 EPR Sealed Ball Bearing








I5

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

TECHNI-TURN NICKEL PLATED MILD STEEL
90° SWIVEL ELBOW




PRODUCT SPECIFICATION


The Techni-turn 90 degree Swivel Elbow is manufactured from mild steel and is then nickel
plated. While not as corrosion resistant as the stainless steel Rotary Elbow it offers a cost
competitive alternative and is ideal for hydraulic applications.


The standard unit comes with nitrile rubber main seals, dust seals and teflon back up
washers. Sizes are from 1/4” to 3/4” and standard threads are BSPP Female & BSPT Male.
Flow rates are the same as for Stainless Steel Rotary Elbows.


WARNING : THESE ARE DESIGNED TO SWIVEL ONLY. DO NOT USE FOR CONSTANT
ROTATION OR SIDEWAYS LOAD APPLICATIONS AS THE SHAFT IS SUPPORTED BY
‘O’RINGS ONLY AND THE SWIVEL MAY FAIL PREMATURELY.

Maximum Recommended Working Pressure : 206 bar


































Size HEX. C BODY. D DIM. E DIM. F

1/4” & 3/8” 7/8” AF 25.3mm Sq 40mm 56mm
1/2” 1.1/8” AF 32.0mm Sq 51mm 70mm
3/4” 1.3/8” AF 44.0mm Sq 68mm 87mm










I6

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

TECHNI-TURN NICKEL PLATED MILD STEEL
90° SWIVEL ELBOW



Part Numbers & Ordering





















Working
Part No Thread A Body Thread B Shaft Seal Material Pressure (Bar)
RE-0404-STD 1/4” BSPPF 1/4” BSPT Nitrile 206
RE-0606-STD 3/8” BSPPF 3/8” BSPT Nitrile 206
RE-0606-REV 3/8” BSPT 3/8” BSPPF Nitrile 206
RE-0606-FF 3/8” BSPPF 3/8” BSPPF Nitrile 206
RE-0606-MM 3/8” BSPT 3/8” BSPT Nitrile 206
RE-0808-STD 1/2” BSPPF 1/2” BSPT Nitrile 206
RE-1212-STD 3/4” BSPPF 3/4” BSPT Nitrile 206


RE-V-0404-STD 1/4” BSPPF 1/4” BSPT Viton 206
RE-V-0606-STD 3/8” BSPPF 3/8” BSPT Viton 206
RE-V-0606-REV 3/8” BSPT 3/8” BSPPF Viton 206
RE-V-0606-FF 3/8” BSPPF 3/8” BSPPF Viton 206
RE-V-0606-MM 3/8” BSPT 3/8” BSPT Viton 206
RE-V-0808-STD 1/2” BSPPF 1/2” BSPT Viton 206
RE-V-1212-STD 3/4” BSPPF 3/4” BSPT Viton 206


RE-E-0404-STD 1/4” BSPPF 1/4” BSPT EPR 206
RE-E-0606-STD 3/8” BSPPF 3/8” BSPT EPR 206
RE-E-0606-REV 3/8” BSPT 3/8” BSPPF EPR 206
RE-E-0606-FF 3/8” BSPPF 3/8” BSPPF EPR 206
RE-E-0606-MM 3/8” BSPT 3/8” BSPT EPR 206
RE-E-0808-STD 1/2” BSPPF 1/2” BSPT EPR 206
RE-E-1212-STD 3/4” BSPPF 3/4” BSPT EPR 206












I7

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

TECHNI-TURN NICKEL PLATED MILD STEEL

90° SWIVEL ELBOW



Repair Kits



The Nickel Plated Mild Steel 90 degree Swivel Elbow Repair Kit consists of:


• 2 x Main ‘O’ Rings
• 2 x Teflon Backup Washers
• 2 x Dust ‘O’ Rings
• 1 x Steel Circlip






Part No. SWIVEL SIZE SEAL

MATERIAL

RK-SE-0406 1/4” & 3/8” Nitrile

RK-SE-0808 1/2” Nitrile


RK-SE-1212 3/4” Nitrile


RK-V-SE-0406 1/4” & 3/8” Viton

RK-V-SE-0808 1/2” Viton


RK-V-SE-1212 3/4” Viton

RK-E-SE-0406 1/4” & 3/8” EPR


RK-E-SE-0808 1/2” EPR

RK-E-SE-1212 3/4” EPR


























I8

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

WATER BLASTER STRAIGHT SWIVEL





The Water Blaster Straight Swivel is available in Brass or Stainless Steel material and is
designed for use on spray guns to take the twisting out of the hose.


The threads are BSPP male and BSPP female.












Part No SIZE Material Working
(“) Pressure (Bar)
BRSS-04 1/4 Brass 280
BRSS-06 3/8 Brass 280
BRSS-08 1/2 Brass 280
STSTSS-04 1/4 Stainless steel 390
STSTSS-06 3/8 Stainless steel 390
STSTSS-08 1/2 Stainless steel 200











































I9

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

TECHNI-TURN HOT BITUMEN STRAIGHT SWIVEL




The Techni-turn Hot Bitumen Straight Swivel is manufactured from mild steel with a plated
finish.
It has a very simple yet rugged design with no flow restrictions.
These are designed for any bitumen or low pressure application to stop twisting of the hose.
Threads are BSPT Male and BSPT Female. Sealing is via Viton ‘O’rings.















Part No SIZE
(“)
BSS-12 3/4
BSS-16 1
BSS-20 1.1/4
BSS-24 1.1/2
BSS-32 2
BSS-48 3
BSS-64 4












































I10

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

®
HS SERIES / HEAVY DUTY IN-LINE / FULL FLOW
STEM
®


BARREL HS SERIES / HEAVY DUTY IN-LINE / FULL FLOW
HS SERIES / HEAVY DUTY IN-LINE / FULL FLOW
®




STEM

1 SYNTHETIC RUBBER O-RING
STEM
2 TEFLON™ BACK UP RING
3 DOUBLE ROW RETAINER BALLS (THRUST BEARING)
BARREL BARREL
4 DUST SEAL

5 BALL HOLE PLUG (TWO)

1 SYNTHETIC RUBBER O-RING
2 TEFLON™ BACK UP RING
3 DOUBLE ROW RETAINER BALLS (THRUST BEARING)
1 SYNTHETIC RUBBER O-RING 4 DUST SEAL
5 BALL HOLE PLUG (TWO)
2 TEFLON™ BACK UP RING

3 DOUBLE ROW RETAINER BALLS (THRUST BEARING)
HYDRAULICS, INC. Design Features
4 DUST SEAL HYDRAULICS, INC. Design Features •
• Through hardened alloy steel barrel and stem
5 BALL HOLE PLUG (TWO) • Standard O-Ring and back up ring - Field replaceable seal kits Standard O-Ring and back up ring - Field replaceable seal kits
• Through hardened alloy steel barrel and stem
• Large wear surface for angular deflection & low rotation torque.
• Large wear surface for angular deflection & low rotation torque. • Burnished barrel bore for extended seal life. • Burnished barrel bore for extended seal life.
• Improved bearing design greatly extends useful life • Optional seal materials available
• Improved bearing design greatly extends useful life
• Dual Race design improves resistance to side loads • Low pressure drop • Optional seal materials available
• Permanently lubricated bearing • Protective treatment meeting SAE standards • Low pressure drop
• Dual Race design improves resistance to side loads
• Chrome retainer balls - Long life.
• Permanently lubricated bearing • Protective treatment meeting SAE standards
HYDRAULICS, INC. Design Features • Chrome retainer balls - Long life.



• Through hardened alloy steel barrel and stem • Standard O-Ring and back up ring - Field replaceable seal kits
CAUTION:
Do not attempt to disconnect and disassemble swivels under pressure. Do not remove the swivel barrel from stem while under
• Burnished barrel bore for extended seal life.
• Large wear surface for angular deflection & low rotation torque. pressure. Do not attempt to operate damaged swivels and do not operate swivels displaying fluid leak and/or obvious bearing
wear. Consider that a selected swivels rated pressure cannot exceed the lowest rating of the swivel and of it’s selected ports.
• Optional seal materials available
• Improved bearing design greatly extends useful life Refer to page 3, Safety Information, Selecting and Using Hydraulics, Inc. Swivel Joints.
Pressure Limitations:
• Low pressure drop
• Dual Race design improves resistance to side loads Maximum working pressure for “HS” Series swivels is dependant on port options chosen; however, connecting plumbing may be
rated higher or lower than that of the swivel. The rated working pressure of a fluid power system should not exceed the lowest
• Protective treatment meeting SAE standards
• Permanently lubricated bearing rated component therein.
Installation Information:
CAUTION:
Hydraulics, Inc. swivel joints are generally considered for low speed rotation as encountered in fluid power systems. Maximum
• Chrome retainer balls - Long life. speed of rotation depends upon system environment, with fluid types and extreme conditions related to temperature and pressure
Do not attempt to disconnect and disassemble swivels under pressure. Do not remove the swivel barrel from stem while under
being of prime consideration. Questionable applications should be proven by laboratory or prototype testing. Contamination at
pressure. Do not attempt to operate damaged swivels and do not operate swivels displaying fluid leak and/or obvious bearing
installation should be avoided and connecting plumbing should not cause undue loading. The swivel should not be used as a load
bearing or structural member. Refer to Safety Information - Selecting and Using Hydraulics, Inc. Swivel Joints (page 3) for
additional information.wear. Consider that a selected swivels rated pressure cannot exceed the lowest rating of the swivel and of it’s selected ports.
Refer to page 3, Safety Information, Selecting and Using Hydraulics, Inc. Swivel Joints.
Options:
Swivels shown in this catalog are considered standard to Hydraulics, Inc. For other requirements relative to pressure ratings, port
options, or sizes not shown in this catalog, please contact us. Optional seal materials are available.
Pressure Limitations:
Maximum working pressure for “HS” Series swivels is dependant on port options chosen; however, connecting plumbing may be
rated higher or lower than that of the swivel. The rated working pressure of a fluid power system should not exceed the lowest
CAUTION: rated component therein. I11
Do not attempt to disconnect and disassemble swivels under pressure. Do not remove the swivel barrel from stem while under
PH: 0800 FITTINGS 24 HOURS.
Installation Information:
pressure. Do not attempt to operate damaged swivels and do not operate swivels displaying fluid leak and/or obvious bearing Return to Main Index
Return to Start of Section
Hydraulics, Inc. swivel joints are generally considered for low speed rotation as encountered in fluid power systems. Maximum
wear. Consider that a selected swivels rated pressure cannot exceed the lowest rating of the swivel and of it’s selected ports.
speed of rotation depends upon system environment, with fluid types and extreme conditions related to temperature and pressure
Refer to page 3, Safety Information, Selecting and Using Hydraulics, Inc. Swivel Joints.
being of prime consideration. Questionable applications should be proven by laboratory or prototype testing. Contamination at
installation should be avoided and connecting plumbing should not cause undue loading. The swivel should not be used as a load
Pressure Limitations: bearing or structural member. Refer to Safety Information - Selecting and Using Hydraulics, Inc. Swivel Joints (page 3) for
Maximum working pressure for “HS” Series swivels is dependant on port options chosen; however, connecting plumbing may be
additional information.
rated higher or lower than that of the swivel. The rated working pressure of a fluid power system should not exceed the lowest
rated component therein.
Options:
Installation Information: Swivels shown in this catalog are considered standard to Hydraulics, Inc. For other requirements relative to pressure ratings, port
options, or sizes not shown in this catalog, please contact us. Optional seal materials are available.
Hydraulics, Inc. swivel joints are generally considered for low speed rotation as encountered in fluid power systems. Maximum
speed of rotation depends upon system environment, with fluid types and extreme conditions related to temperature and pressure
being of prime consideration. Questionable applications should be proven by laboratory or prototype testing. Contamination at
installation should be avoided and connecting plumbing should not cause undue loading. The swivel should not be used as a load
bearing or structural member. Refer to Safety Information - Selecting and Using Hydraulics, Inc. Swivel Joints (page 3) for
additional information.


Options:
Swivels shown in this catalog are considered standard to Hydraulics, Inc. For other requirements relative to pressure ratings, port

options, or sizes not shown in this catalog, please contact us. Optional seal materials are available.

HYDRAULICS INC. HS SERIES

HIGH PRESSURE BSPP FEMALE / BSPP FEMALE STRAIGHT SWIVEL





BALL HOLE
PLUG













BARREL STEM



Working
Part No Thread Body (Barrel) Thread Shaft (Stem) A (“) B (“) C (“) Pressure (Bar)
HS6BF4-BF4 1/4” BSPPF 1/4” BSPPF 2.52 1.75 1.00 345
HS6BF6-BF6 3/8” BSPPF 3/8” BSPPF 2.52 1.75 1.00 345
HS8BF8-BF8 1/2” BSPPF 1/2” BSPPF 3.35 2.17 1.25 345
HS12BF12-BF12 3/4” BSPPF 3/4” BSPPF 3.51 2.42 1.50 345
HS16BF16-BF16 1” BSPPF 1” BSPPF 3.61 2.44 1.75 275
HS20BF20-BF20 1.1/4” BSPPF 1.1/4” BSPPF 3.96 2.60 2.25 275
HS24BF24-BF24 1.1/2” BSPPF 1.1/2” BSPPF 5.27 3.22 2.75 275
HS32BF32-BF32 2” BSPPF 2” BSPPF 6.07 4.30 3.50 206







HYDRAULICS INC. HS SERIES

HIGH PRESSURE

REPAIR KITS



Swivel
Part No Size
HS6-1 3/8”
HS8-1 1/2”
HS12-1 3/4”
HS16-1 1”
HS20-1 1.1/4”
HS24-1 1.1/2”
HS32-1 2”










I12

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

S SERIES / IN-LINE 3000 PSI / FULL FLOW










STEM
BARREL









1 SYNTHETIC RUBBER O-RING
2 TEFLON BACK UP RING
3 RETAINER BALLS
4 DUST SEAL
5 BALL HOLE PLUG


HYDRAULICS, INC. Design Features

• Hardened carbon steel barrel and stem - Large wear • Burnished barrel bore - Extended seal life
surface • Optional seal material - Page 2
• Protective treatment meeting SAE hose fitting standards • Low pressure drop - See in-line pressure drop chart -
• Chrome retainer balls - Long life Page 27
• Standard O-Ring and back up ring - Field replaceable • Low rotational torque - see in-line torque chart - Page 27
seal kits - Page 26 HYDRAULICS, INC Design Features
Optonal grease fitting - Page 26
•
• Hardened carbon steel barrel and stem - Large wear surface
MALE JIC TO FEMALE PIPE
• Protective treatment meeting SAE hose fitting standards
• Chrome retainer balls - Long life

• Standard O-Ring and back up ring - Field replaceable seal kits
• Burnished barrel bore - Extended seal life
• Optional seal material
• Low pressure drop - See in-line pressure drop chart
• Low rotational torque - See in-line torque chart
• Optional grease fitting







PART NO. BARREL STEM C D
THREAD THREAD A B HEX HEX
S6J6-PF4 9/16 - 18 1/4 - 18 2.67 1.77 1.00 1.00
S6J8-PF6 3/4 - 16 3/8 - 18 2.81 1.90 1.00 1.00
S8J10-PF8 7/8 - 14 1/2 - 14 3.14 2.00 1.25 1.25
S8J12-PF12 1 1/16 - 12 3/4 - 14 3.23 2.09 1.25 1.25
S16J16-PF16 1 5/16 - 12 1 - 11 1/2 3.75 2.58 1.75 1.62
S20J20-PF20 1 5/8 - 12 1 1/4 - 11 1/2 4.08 2.74 2.25 2.00
S24J24-PF24 1 7/8 - 12 1 1/2 - 11 1/2 4.82 3.12 2.75 2.37

4 S32J32-PF32 2 1/2 - 12 2 - 11 1/2 6.16 4.39 3.50 3.00


I13

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

HYDRAULICS INC. S SERIES

3000 PSI JIC MALE / JIC FEMALE STRAIGHT SWIVEL


















Working
Part No Thread Body (Barrel) Thread Shaft (Stem) A (“) B (“) C (“) D (“) Pressure (Bar)
S6J6-JF6 9/16”-18 9/16”-18 2.37 1.77 1.00 1.00 206
S6J8-JF8 3/4”-16 3/4”-16 2.56 1.90 1.00 1.00 206
S8J10-JF10 7/8”-14 7/8”-14 2.78 2.00 1.25 1.25 206
S8J12-JF12 1.1/16”-12 1.1/16”-12 2.89 2.09 1.25 1.25 206
S14J14-JF14 1.3/16”-12 1.3/16”-12 2.89 2.09 1.37 1.37 206
S16J16-JF16 1.5/16”-12 1.5/16”-12 3.40 2.60 1.75 1.62 206
S20J20-JF20 1.5/8”-12 1.5/8”-12 3.65 2.74 2.25 2.00 206
S24J24-JF24 1.7/8”-12 1.7/8”-12 4.12 3.12 2.75 2.37 206
S32J32-JF32 2.1/2”-12 2.1/2”-12 5.68 4.39 3.50 3.00 206





HYDRAULICS INC. S SERIES

3000 PSI NPT MALE / NPT FEMALE STRAIGHT SWIVEL

















Working
Part No Thread Body (Barrel) Thread Shaft (Stem) A (“) B (“) C (“) D (“) Pressure (Bar)
S6PF4-P4 1/4”-18 1/4”-18 2.34 1.50 1.00 1.00 206
S6PF6-P6 3/8”-18 3/8”-18 2.34 1.50 1.00 1.00 206
S8PF8-P8 1/2”-14 1/2”-14 2.77 1.68 1.25 1.25 206
S8PF12-P12 3/4”-14 3/4”-14 2.89 2.68 1.25 1.25 206
S16PF16-P16 1”-11.5 1”-11.5 3.89 2.37 1.75 1.63 206
S20PF20-P20 1.1/4”-11.5 1.1/4”-11.5 4.35 2.60 2.25 2.00 206
S24PF24-P24 1.1/2”-11.5 1.1/2”-11.5 5.27 3.22 2.75 2.37 206
S32PF32-P32 2”-11.5 2”-11.5 6.87 4.30 3.50 3.00 206




I14

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

HYDRAULICS INC. S SERIES

3000 PSI NPT FEMALE / NPT FEMALE STRAIGHT SWIVEL


















Working
Part No Thread Body (Barrel) Thread Shaft (Stem) A (“) B (“) C (“) D (“) Pressure (Bar)
S6PF4-PF4 1/4”-18 1/4”-18 2.45 1.55 1.00 1.00 206
S6PF6-PF6 3/8”-18 3/8”-18 2.45 1.55 1.00 1.00 206
S8PF8-PF8 1/2”-14 1/2”-14 2.85 1.70 1.25 1.25 206
S8PF12-PF12 3/4”-14 3/4”-14 2.85 1.70 1.25 1.25 206
S16PF16-PF16 1”-11.5 1”-11.5 3.55 2.40 1.75 1.63 206
S20PF20-PF20 1.1/4”-11.5 1.1/4”-11.5 4.00 2.60 2.25 2.00 206
S24PF24-PF24 1.1/2”-11.5 1.1/2”-11.5 4.92 3.22 2.75 2.37 206
S32PF32-PF32 2”-11.5 2”-11.5 6.07 4.30 3.50 3.00 206




















HYDRAULICS INC. S SERIES

REPAIR KITS


Swivel
Part No Size
S6-1 3/8”
S8-1 1/2”
S12-1 3/4”
S16-1 1”
S20-1 1.1/4”
S24-1 1.1/2”
S32-1 2”









I15

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

9S SERIES / 90° 3000 PSI /PRESSURE BALANCED




BARREL






STEM









1 NON-LOAD BEARING RETAINING RING
2 SYNTHETIC RUBBER 0-RING (TWO)
3 TEFLON BACK UP RING (TWO)
4 DUST SEAL (TWO)


HYDRAULICS, INC. Design Features

• Hardened carbon steel barrel - Large wear surface • Standard O-Ring and back up ring - Field replaceable
• Barrel thread boss and stem annealed - Reduced seal kits - Page 26
breakage from shock and vibration • Optional seal material - Page 2
• Burnished barrel bore - Extended seal life • Recessed and protected dust seals
• Copper filled furnace braze joints • Pressure balanced for low rotational torque - See 90°
• Heavy duty retainer ring torque chart - Page 27
• Protective treatment meeting SAE hose fitting • Excellent flow characteristics - See 90° pressure drop
standards chart - Page 27


HYDRAULICS, INC Design Features
MALE JIC TO MALE JIC

• Hardened carbon steel barrel and stem - Large wear surface

• Barrel thread boss and stem annealed - Reduced breakage from
shock and vibration
• Burnished barrel bore - Extended seal life
• Copper filled furnace braze joints
• Heavy duty retainer ring
• Protective treatment meeting SAE hose fitting standards
STEM
H
K
• Standard O-Ring and back up ring - Field replaceable seal kits
PART NO. BARREL THREAD A B C D HEX. DIA.
THREAD
9S6J5-J5 Optional seal material 2.50 1.65 1.80 1.17 .87 1.25
•
1/2 - 20
1/2 - 20
9S6J5-J6 1/2 - 20 9/16 - 18 2.50 1.65 1.80 1.17 .87 1.25
• Recessed and protected dust seals
9S6J6-J5 9/16 - 18 1/2 - 20 2.50 1.65 1.80 1.17 .87 1.25
• Pressure balanced for low rotational torque - See 90° torque chart
9S6J6-J6 9/16 - 18 9/16 - 18 2.50 1.65 1.81 1.18 .87 1.25
9S6J6-J8Excellent flow charachteristics - See 90° pressure drop chart 1.25
•
2.50
3/4 - 16
1.65
1.18
9/16 - 18
1.81
.87
9S6J8-J8 3/4 - 16 3/4 - 16 2.50 1.65 1.91 1.28 .87 1.25
9S8J10-J10 7/8 - 14 7/8 - 14 2.83 1.99 2.26 1.50 1.00 1.50
9S12J12-J12 1 1/16 - 12 1 1/16 - 12 3.40 2.37 3.05 1.99 1.25 2.12
9S16J16-J16 1 5/16 - 12 1 5/16 - 12 3.82 2.70 3.36 2.18 1.62 2.37
9S20J20-J20 1 5/8 - 12 1 5/8 - 12 4.12 2.80 3.70 2.33 2.00 2.75
9S24J24-J24 1 7/8 - 12 1 7/8 - 12 5.27 3.51 4.65 2.90 2.37 3.50
9S32J32-J32 2 1/2 - 12 2 1/2 - 12 6.25 4.16 5.67 3.54 3.12 4.25
7
I16
PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

HYDRAULICS INC. 9S SERIES

3000 PSI JIC MALE / UNO MALE 90° SWIVEL















Working
Part No Thread Body (Barrel) Thread Shaft (Stem) A (“) B (“) C (“) D (“) H (“) K (“) Pressure (Bar)
9S6J5-O6 1/2”-20 9/16”-18 2.50 1.65 1.80 1.17 0.87 1.25 206
9S6J6-O6 9/16”-18 9/16”-18 2.50 1.65 1.81 1.18 0.87 1.25 206
9S6J6-O8 9/16”-18 3/4”-16 2.50 1.65 1.81 1.18 0.87 1.25 206
9S6J8-O8 3/4”-16 3/4”-16 2.50 1.65 1.91 1.28 0.87 1.25 206
9S8J10-O10 7/8”-14 7/8”-14 2.58 1.74 2.26 1.50 1.00 1.50 206
9S12J12-O12 1.1/16”-12 1.1/16”-12 3.24 2.21 3.05 1.99 1.25 2.12 206
9S16J16-O16 1.5/16”-12 1.5/16”-12 3.82 2.70 3.36 2.18 1.62 2.37 206
9S20J20-O20 1.5/8”-12 1.5/8”-12 3.76 2.44 3.70 2.33 2.00 2.75 206
9S24J24-O24 1.7/8”-12 1.7/8”-12 4.78 3.02 4.65 2.90 2.37 3.50 206
9S32J32-O32 2.1/2”-12 2.1/2”-12 5.50 3.41 5.67 3.54 3.12 4.25 206



HYDRAULICS INC. 9S SERIES
3000 PSI JIC MALE / NPT MALE 90° SWIVEL















Working
Part No Thread Body (Barrel) Thread Shaft (Stem) A (“) B (“) C (“) D (“) H (“) K (“) Pressure (Bar)
9S6J5-P4 1/2”-20 1/4”-18 2.50 1.65 1.80 1.17 0.87 1.25 206
9S6J5-P6 1/2”-20 3/8”-18 2.50 1.65 1.80 1.17 0.87 1.25 206
9S6J6-P4 9/16”-18 1/4”-18 2.50 1.65 1.81 1.18 0.87 1.25 206
9S6J6-P6 9/16”-18 3/8”-18 2.50 1.65 1.81 1.18 0.87 1.25 206
9S6J8-P6 3/4”-16 3/8”-18 2.50 1.65 1.91 1.28 0.87 1.25 206
9S8J8-P8 3/4”-16 1/2”-14 2.83 1.99 2.20 1.44 1.00 1.50 206
9S8J10-P8 7/8”-14 1/2”-14 2.83 1.99 2.26 1.50 1.00 1.50 206
9S12J12-P12 1.1/16”-12 3/4”-14 3.40 2.37 3.05 1.99 1.25 2.12 206
9S16J16-P16 1.5/16”-12 1”-11.5 3.82 2.70 3.36 2.18 1.62 2.37 206
9S20J20-P20 1.5/8”-12 1.1/4”-11.5 4.18 2.86 3.70 2.33 2.00 2.75 206
9S24J24-P24 1.7/8”-12 1.1/2”-11.5 5.32 3.55 4.65 2.90 2.37 3.50 206
9S32J32-P32 2.1/2”-12 2”-11.5 6.20 4.10 5.67 3.54 3.12 4.25 206


I17

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

HYDRAULICS INC. 9S SERIES
3000 PSI NPT FEMALE / NPT FEMALE 90° SWIVEL




















Working
Thread Body Thread Shaft Pressure
Part No (Barrel) (Stem) A (“) B (“) C (“) D (“) H (“) J (“) K (“) (Bar)
9S6PF4-PF4 1/4”-18 1/4”-18 2.50 1.65 2.00 1.37 0.87 0.75 1.25 206
9S6PF4-PF6 1/4”-18 3/8”-18 2.50 1.65 2.00 1.37 0.87 0.75 1.25 206
9S6PF6-PF4 3/8”-18 1/4”-18 2.50 1.65 2.00 1.37 0.87 0.87 1.25 206
9S6PF6-PF6 3/8”-18 3/8”-18 2.50 1.65 2.00 1.37 0.87 0.87 1.25 206
9S8PF8-PF8 1/2”-14 1/2”-14 2.62 1.78 2.59 1.84 1.00 1.00 1.50 206
9S12PF12-PF12 3/4”-14 3/4”-14 3.00 2.00 3.30 2.24 1.25 1.37 2.12 206
9S16PF16-PF16 1”-11.5 1”-11.5 3.40 2.28 3.64 2.46 1.62 1.62 2.37 206
9S20PF20-PF20 1.1/4”-11.5 1.1/4”-11.5 4.08 2.76 3.98 2.61 2.00 2.00 2.75 206
9S24PF24-PF24 1.1/2”-11.5 1.1/2”-11.5 4.89 3.12 5.20 3.45 2.37 2.37 3.50 206
9S32PF32-PF32 2”-11.5 2”-11.5 5.50 3.41 6.06 3.94 3.12 2.87 4.25 206
















HYDRAULICS INC. 9S SERIES
REPAIR KITS



Swivel
Part No Size
9S6-1 3/8”
9S8-1 1/2”
9S12-1 3/4”
9S16-1 1”
9S20-1 1.1/4”
9S24-1 1.1/2”
9S32-1 2”









I18

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

TECHNI-TURN STAINLESS STEEL
90° ROTARY ELBOW




SEAL TYPES

The standard unit comes with nitrile rubber seals , teflon back up washers and PETP bushes
to align the shaft. This combination is mainly suitable for cold water or hydraulic oil. If the
application involves chemicals or excessive temperatures then please see the basic application
seal material resistance chart listed below. If you are still unsure of correct seal type then
please contact our sales staff for advice. All units supplied with Viton or Ethylenepropylene
(EPR) seals are also supplied with Teflon bushes instead of the standard PETP bushes.


FLUID NITRILE VITON EPR


Acid - all types - - -
Air - up to 71deg C. E E E
Air - 71deg C. to 93deg C. G E E
Air - 93deg C. to 150deg C. U E G
Diesel Oil E E U
Gasoline E E U
Hydraulic Oil - up to 120deg C. E E U
Hydraulic Oil - 120deg C. to 230deg C. U E U
LPG E E U
Steam - up to 198deg C. U U C
Water - up to 93deg C. E E E
Water - 93deg C. to 176deg C. U U C




E = Excellent, G = Good, C = Conditional, U = Unsuitable, - = Consult Factory



For constant rotation applications i.e. cooling rollers, hydraulic clutches etc, roller bearings
should be used in place of the bushes.

Size : 1/4” – 3/4” Up to 20 RPM use Bushes – Over 20 RPM use Bearings.
Size : 1” – 1.1/2” Up to 10 RPM use Bushes – Over 10 RPM use Bearings.


Note : The above is indicative only. The bushes will not handle high revolutions as they wear
out very quickly which can cause the shaft to pick up on the inside of the body & then makes
the unit unrepairable. With the bearing unit the seals wear out but the shaft stays aligned by
the bearings and the seals can then be replaced at a much lower cost than replacing the whole
unit.











I19

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

HIGH PRESSURE HYDRAULIC SWIVEL JOINTS










“S” Series/In-Line Swivel Joint


Sizes - ¼" through 2" pipe size
Connection types - JIC, pipe, SAE O-Ring face
seal (male & female)
Operating pressures - vacuum & to 3,000 PSI
Operating temperatures - 40° to 200° F









“9S” Series/90° Swivel Joint


Sizes - ¼" through 2" pipe size
Connection types - JIC & O-Ring (male), pipe
and SAE O-Ring face seal
(male & female) & pipe union
Operating pressures - vacuum & to 3,000 PSI
Operating temperatures - 40° to 200° F








“9SS” Series/Dual Plane Swivel Joint


Sizes - ¼" through 1¼" pipe size
Connection types - JIC & O-Ring (male), pipe & SAE
O-Ring face seal (male & female)
Operating Pressures - vacuum & to 3,000 PSI
Operating Temperatures - 40° to 200° F









“18S” Series/180° Swivel Joint

Sizes - ¼" through 2" pipe size
Connection types - JIC (male), pipe & SAE O-Ring
face seal (male & female) & pipe union
Operating pressures - vacuum & to 3,000 PSI
Operating temperatures - 40° to 200° F





3


I20

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

ROTATIONAL TORQUE AND PRESSURE DROP CHART








ROTATIONAL TORQUE vs PRESSURE - IN-LINE ROTATIONAL TORQUE vs PRESSURE - 90°

140 24 340 32

120 280
100 245
80 210
24
70 175
60 20 140
50 105
40 70 20
30 60
20 50
16 40 16
12 14 & 16 30
12
8 20 8
8
4 10
6 6
0
0 1000 2000 3000 0 1000 2000 3000
PRESSURE - PSIG PRESSURE - PSIG





PRESSURE DROP vs FLOW (GPM) - IN-LINE PRESSURE DROP vs FLOW (GPM) - 90°
80 80
60 60
40 40 6 24 32
30 30
20 6 20 8
8
10 10
6 6
12
4 4
24
14 16 20
2 2
16
1 1
.6 .6
.4 .4
20
.2 .2
.1 .1
1 2 4 6 10 20 40 60 100 200 400 800 1 2 4 6 10 20 40 60 100 200 400 800
FLOW RATE FLOW RATE


• Pressure Drop Thru Swivel Based on Flows Giving • Pressure Drop Thru Swivel Based on Flows Giving
15 FPS Fluid Velocity Thru Nominal Bore Size 15 FPS Fluid Velocity Thru Nominal Bore Size
27


I21

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

Return to Start of Section Return to Main Index

Fluid Fittings & Fluid Steels
Branding / Logo Usage Guide
The logo(s) should be used as supplied without modification.
Various formats are available upon request to suit all applications.
The following guidelines are to identify the logo makeup and are NOT to be used to recreate the logo except where express
permission has been given to do so.
INDEPENDANT LOGO USAGE
FLUID FITTINGS LOGO
COLOUR - Prefered Option
F
Fittings
The word “FLUID” - Franklin Gothic Heavy
The word “Fittings” - Helvetica Neue Light
The “F” device - Min Round
The colour breakdown for various uses is as follows:
Spot:
Red - PMS 485
Black - Pantone Black
CMYK:
Red
Black
Red
R: 0
R: 255
C: 0
C: 0
G: 0
M: 100
G: 0
M: 0
Y: 100
B: 0
Y: 0
B: 0
K: 100
K: 0 F FLUID RGB: Black
BLACK / GREYSCALE VERSION
F Fittings
HIGH QUALITY PRODUCTS F FLUID
EXCELLENCE IN SERVICE
If necessary the logo can be represented in greyscale. The colour breakdown for various uses is as follows:
Spot:
SECTION J
Black - Pantone Black
Grey - Cool Grey 10
CMYK: Black RGB:
Grey
Quick Release Couplings Black
C: 0
Red
C: 0

R: 75
R: 0
M: 0
M: 0

Y: 0 Y: 0 G: 75 G: 0
K: 70 K: 100 B: 75 B: 0
TABLE OF CONTENTS
Poppet Type 103 SERIES
Quick Release ISO-B CARBON STEEL
Couplers
• Techni-Turn PBR Compatible Couplings Page J2
• QNV Series Poppet Couplers Page J3
• QNVB Series Ball Couplers Page J3
• QANV Series ISO A Couplers Page J4
• QBNV Series ISO B Couplers Page J5
• QPS Series Push/Pull Couplers Page J7
131 SERIES
Flat Face Quick
Release Couplers CPR
• QFF Series Flat Face Couplers Page J8
STANDARD MODELS
MALE
07 202 SERIES
DN CH1 B ØF L DN ØA MALE FEMALE
¼” BSP
Screw Together Quick 09 22 62,50 16,20 116,50 07 ¼” NPTF 131.11111AB 131.12111AB 500Bar
85,50
48
131.11111BB 131.12111BB
19,80
24
⅜” BSP
131.11112AC 131.12112AC
62,50
24,50
27
13
134,50
POPPET VALVE
15
Release Couplers 17 HPA 70,50 27 132 09 ⅜” NPTF 131.11112BC 131.12112BC 350Bar
36
131.11112AD 131.12112DC
45
154
30
½ ” BSP
82,50
½ ” NPTF
131.11112BD 131.12112BD
90
21
57
70
30 55 111 36 173 ¾ ”-16ORB 131.11112GF 131.12112GF
215
45 75 125 73 ⅞ ”-14ORB 131.11112GH 131.12112GH
½” BSP 131.11113AD 131.12113AD
½” NPTF 131.11113BD 131.12113BD
Page J9
• QVS Series Screw-together Couplers 13 ⅞” - 14ORB 131.11113GH 131.12113GH 350Bar
131.11113AE 131.12113AE
¾” BSP
¾” NPTF
131.11113BE 131.12113BE

• Q321 Screw-together Flat Face Couplers STANDARD MALE MODELS Page J10

1 1/16” 12ORB 131.11113GK 131.12113GK
131.11114AE 131.12114AE
¾” BSP
131.11114BE 131.12114BE
350Bar
¾” NPTF
15
1 1/16”-12ORB 131.11114GK 131.12114GK
Page J11

1” BSP
L1
• QPVV Screw-together Hydraulic Tool Couplers DN ØA1 REF. 1” NPTF 131.11115AF 131.12115AF ØF 350Bar L
E/C
ØG
131.11115BF 131.12115BF
17


Page J12

• 5TV Series Heavy Duty Screw-together Couplers ¼” NPTF 202.11141BB 1200Bar 131.11116AG 131.12116AG * 350Bar *
1 5/16”-12ORB 131.11115GO 131.12115GO
*
06
*
1 ¼” BSP
*
21
131.11116BG 131.12116BG
1 ¼” NPTF
10
24 1 3/16” UN 38,88 18,99 72,75
⅜” NPTF 202.11142BC 1200Bar
1 ½” BSP
131.11117BH 131.12117BH
Water Blaster Quick 140 SERIES 30 1 ½” NPTF 131.11117AH 131.12117AH 350Bar
2” BSP
131.12118AI 250Bar
45
131.11118AI
Release Couplers CVF FEMALE STAINLESS STEEL MALE MODELS
DN ØA1 REF. E/C ØG L1 ØF L
DN CH2 C ØD L
06 ¼” NPTF 202.21121BB 1200Bar * * * * *
07 22 48 28 85,50
• Q140 Series Waterblast Couplers 09 27 64,50 ⅜” NPTF 202.21122BC 1200Bar 24 1 3/16” UN 42,50 18,99 72,75
Page J14
32
116,50
10
13
134,50
38
80,50
32
78
15
36
42
Quick couplings upon request and subjected to minimum quantities.
132

154
17
92,50
48
45
Nickel-palted product  add 011 at the end of the reference.
21
173
55
55
105
65
136SERIES
132,50
215
80
30
45
80
165
100
Diagnostic Quick MALE (CARBON ST.)
Release Couplers DRF DN ØA CH1 C ØF L REF.
STANDARD FEMALE MODELS
06 ¼” BSP 19 25 14,10 45,10 140.11001AB 700 Bar
18,90
ØE
140.11002AC
• Q136 Series Diagnostic Couplers 10 DN ⅜” BSP ØA 22 28 REF. 48,50 CH2 L2 600 Bar L
Page J15
33
55,50
20,40
13
*
*
¼” NPTF M.
*
06 ½” BSP 27 202.12141BM 1200Bar 140.11003AD 500 Bar *
10 ⅜” NPTF M. 202.12142BN 1200Bar 22 45,50 34,50 72,75
STANDARD MODELS
120 SERIES
STAINLESS STEEL FEMALE MODELS
Trailer Brake DN ØA DN ØA REF. CH2 L L2 L2 ØE L3 CH1 L ØD1
NORMA
REF.
DIN 2353 SAE
136.11110BL
40,8
74,8

Couplers IFR 1/8” NPTF ¼” NPTF M. 202.22121BM 1200Bar * 75 * 41 * 17 *
ANSI B1.20.3
06 DIN 3852 / BSP
136.11110BM
1/4” NPTF
19

136.11110OF
40,5
M14x1,5 ⅜” NPTF M. 202.22122BN 1200Bar 22 74,5 45,50 34,50 72,75
ISO 6149-2
10

3/8” UNF 136.11110WA 72,8 38,8
7/16” UNF SAE J1926-2 136.11110WB 74,3 40,3 17
19
• Q120 Series Trailer Brake Couplers 9/16” UNF 136.11110WC 71 36 Page J16

70
1/2” UNF
37
17
136.11110WD
MALE • Manufactured according to ISO 5676 /
136.11110ZD
9/16” UNF FEMALE (CARBON ST.) 72,8 38,8
ISO/TC23 NFU 16006 norms.
420Bar
04
136.11110ZE
C
L
DN CH1 CH3 11/16” UN E ISO 8434-3 SPECIAL OPTIONS: 17,75 12,6
ØF
74,5
40,5
136.11110ZG
L
24 DN 13/16” UN ØA CH2 B Male with plastic Cap 120.5433AC incorporated, add to
REF.
ØD
13 32 27 51 29 23 * 136.11110YB
7/16” UNF
41,5
base code 010. (Minimum quantity:
75,5250units)
06 1/2” UNF ¼” BSP ISO 8434-2 35 136.11110YC 45,10 140.12011AB 700 Bar 19
22
29,50
9/16” UNF 136.11110YD 75,2 41,2 J1
140.12012AC
10 ⅜” BSP 27 38 34 STANDARD MALE MODELS
600 Bar
48,50
M12x1,5 136.11110QE
39,50
32
13 M14x1,5 ½” BSP ISO 9974-2 45 136.1110QF 55,50 140.12013AD 500 Bar
41
PH: 0800 FITTINGS 24 HOURS. DN ØA ØT 75 REF. 17
136.11110AL
1/8” BSP
120.11113JE
M18x1,5
12L
1/4” BSP DIN 3852-2 136.11110AM Ø13,5 120.11113KFA 19
M20x1,5
Return to Start of Section • The nut is included in the Bulkhead version 13 M22x,15 15L Return to Main Index
120.11113JG
150Bar
BULKHEADS - 120.11113AO
½” BSP M.
½” BSP
DNMALE ØA NORMA REF. - L 120.11113AD L3 CH1 ØD1
L2
9/16” UNF 136.11110ZDP 60,3
DN CH1 C ØF E L
11/16” UN ISO 8434-3 136.11110ZEP 62,8
13 32 43 13/16” UN 15 * 136.11110ZGP 77,1
29
04 420Bar 17,75 19 12,6
7/16” UNF 136.11110YBP 58
1/2” UNF ISO 8434-2 136.11110YCP 58
9/16” UNF 136.11110YDP 60

MALE
Manufactured according to ISO 15171-1, size DN04 under ISO 7241-2 specifications.
DN CH1 CH2 C ØF E L
24
13 32 27 51 29 31 *
DUST CAP – 136.5450AA
FEMALE STANDARD FEMALE MODELS
DN CH2 B ØD L DN ØA REF.
13 27 57 45 * ⅜” BSP 120.12113AC
13 ½” BSP 120.12113AD 150 Bar
M18x1.5 120.12113NE
M20x1.5 120.12113NF
• Metal parking parts is included in all female parts

TECHNI-TURN STEEL PBR REPAIR KITS
PBR COMPATIBLE
Part No Size Description
A heavy duty New Zealand made quick release (“)
Coupling with case hardened male tip for extra PBR-08-O 1/2 O RING
durability. PBR-08-FRK 1/2 FEMALE BODY REPAIR KIT
PBR-08-MRK 1/2 MALE TIP REPAIR KIT
Part No Size Description Connection Working
(“) Pressure PBR-12-O 3/4 O RING
(Bar) PBR-12-T 3/4 TEFLON BACK UP
PBR-08FB 1/2 1/2” FEMALE BODY 1/2” BSPPF 275 PBR-12-FRK 3/4 FEMALE BODY REPAIR KIT
PBR-08MT 1/2 1/2” MALE TIP 1/2” BSPPF 275 PBR-12-MRK 3/4 MALE TIP REPAIR KIT
PBR-12FB 3/4 3/4” FEMALE BODY 3/4” BSPPF 275 PBR-16-O 1 O RING
PBR-12MT 3/4 3/4” MALE TIP 3/4” BSPPF 275 PBR-16-T 1 TEFLON BACK UP
PBR-16FB 1 1” FEMALE BODY 1” BSPTF 275 PBR-16-FRK 1 FEMALE BODY REPAIR KIT
PBR-16MT 1 1” MALE TIP 1” BSPTF 275 PBR-16-MRK 1 MALE TIP REPAIR KIT







PBR DUST PLUGS & CAPS


Part No Size Description Material
(“)
PBR-12-DC 3/4 DUST CAP Plastic
PBR-12-DP 3/4 DUST PLUG Plastic
PBR-16-DC 1 DUST CAP Plastic
PBR-16-DP 1” DUST PLUG Plastic



















J2

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

STEEL QNV SERIES POPPET QNV SERIES

GENERAL PURPOSE DUST CAPS AND PLUGS

• Carbon Steel Part No Body Description Material
• Nitrile Seals Size (“)
• Poppet Valves QNV-DC04 1/4 Cap Plastic
QNV-DC06 3/8 Cap Plastic
QNV-DC08 1/2 Cap Plastic
Part No Body Description Connection Working QNV-DC12 3/4 Cap Plastic
Size (“) Pressure QNV-DC16 1 Cap Plastic
(Bar) QNV-DP04 1/4 Plug Plastic
QNV-F04 1/4 Coupler 1/4” BSPPF 350 QNV-DP06 3/8 Plug Plastic
QNV-M04 1/4 Nipple 1/4” BSPPF 350 QNV-DP08 1/2 Plug Plastic
QNV-F06 3/8 Coupler 3/8” BSPPF 300 QNV-DP12 3/4 Plug Plastic
QNV-M06 3/8 Nipple 3/8” BSPPF 300 QNV-DP16 1 Plug Plastic
QNV-F08 1/2 Coupler 1/2” BSPPF 300
QNV-M08 1/2 Nipple 1/2” BSPPF 300
QNV-F12 3/4 Coupler 3/4” BSPPF 250
QNV-M12 3/4 Nipple 3/4” BSPPF 250
QNV-F16 1 Coupler 1” BSPPF 220
QNV-M16 1 Nipple 1” BSPPF 220

STEEL QNVB SERIES BALL TYPE
GENERAL PURPOSE


• Carbon Steel
• Nitrile Seals
• Ball Type Valve
Interchanges with:
• Faster NV Series
Part No Body Description Connection Working • Aeroquip FD76 Series
Size (“) Pressure • Parker 4000 Series
(Bar)
QNVB-F04 1/4 Coupler 1/4” BSPPF 350 • Snap-tite 60 Series
QNVB-M04 1/4 Nipple 1/4” BSPPF 350
QNVB-F06 3/8 Coupler 3/8” BSPPF 300
QNVB-M06 3/8 Nipple 3/8” BSPPF 300
QNVB-F08 1/2 Coupler 1/2” BSPPF 300
QNVB-M08 1/2 Nipple 1/2” BSPPF 300
QNVB-F12 3/4 Coupler 3/4” BSPPF 250
QNVB-M12 3/4 Nipple 3/4” BSPPF 250
QNVB-F16 1 Coupler 1” BSPPF 220
QNVB-M16 1 Nipple 1” BSPPF 220



***NOTE** See Page J17 for technical details
J3

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

STEEL QANV SERIES ISO A

• Carbon Steel
• Conforms to ISO 7241-1 Series A
• Nitrile Seals


Part No Body Description Connection Working
Size (“) Pressure
(Bar)
QANV-F04 1/4 Coupler 1/4” BSPPF 350
QANV-M04 1/4 Nipple 1/4” BSPPF 350
QANV-F06 3/8 Coupler 3/8” BSPPF 300
QANV-M06 3/8 Nipple 3/8” BSPPF 300
QANV-F08 1/2 Coupler 1/2” BSPPF 300
QANV-M08 1/2 Nipple 1/2” BSPPF 300
QANV-F12 3/4 Coupler 3/4” BSPPF 250
QANV-M12 3/4 Nipple 3/4” BSPPF 250
QANV-F16 1 Coupler 1” BSPPF 230
QANV-M16 1 Nipple 1” BSPPF 230
QANV-F20 1.1/4 Coupler 1.1/4” BSPPF 230
QANV-M20 1.1/4 Nipple 1.1/4” BSPPF 230
QANV-F24 1.1/2 Coupler 1.1/2” BSPPF 200
QANV-M24 1.1/2 Nipple 1.1/2” BSPPF 200
QANV-F32 2 Coupler 2” BSPPF 130
QANV-M32 2 Nipple 2” BSPPF 130



QANV SERIES
DUST CAPS AND PLUGS


Part No Body Description Material
Size (“)
QANV-DC04 1/4 Cap Plastic
QANV-DC06 3/8 Cap Plastic
QANV-DC08 1/2 Cap Plastic
QANV-DC12 3/4 Cap Plastic
QANV-DC16 1 Cap Plastic
QANV-DP04 1/4 Plug Plastic
QANV-DP06 3/8 Plug Plastic
QANV-DP08 1/2 Plug Plastic
QANV-DP12 3/4 Plug Plastic
QANV-DP16 1 Plug Plastic





***NOTE** See Page J19 for technical details

J4

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

STEEL QBNV SERIES ISO B BRASS QBNVB SERIES ISO B


• Carbon Steel • Brass
• Conforms to ISO 7241-1 Series B • Conforms to ISO 7241-1 Series B
• Nitrile Seals • Viton Seals

Part No Body Description Connection Working Part No Body Description Connection Working
Size Pressure Size Pressure
(“) (Bar) (“) (Bar)
QBNV-F04 1/4 Coupler 1/4” BSPPF 400 QBNVB-F04 1/4 Coupler 1/4” BSPPF 250
QBNV-M04 1/4 Nipple 1/4” BSPPF 400 QBNVB-M04 1/4 Nipple 1/4” BSPPF 250
QBNV-F06 3/8 Coupler 3/8” BSPPF 350 QBNVB-F06 3/8 Coupler 3/8” BSPPF 200
QBNV-M06 3/8 Nipple 3/8” BSPPF 350 QBNVB-M06 3/8 Nipple 3/8” BSPPF 200
QBNV-F08 1/2 Coupler 1/2” BSPPF 320 QBNVB-F08 1/2 Coupler 1/2” BSPPF 200
QBNV-M08 1/2 Nipple 1/2” BSPPF 320 QBNVB-M08 1/2 Nipple 1/2” BSPPF 200
QBNV-F12 3/4 Coupler 3/4” BSPPF 300 QBNVB-F12 3/4 Coupler 3/4” BSPPF 150
QBNV-M12 3/4 Nipple 3/4” BSPPF 300 QBNVB-M12 3/4 Nipple 3/4” BSPPF 150
QBNV-F16 1 Coupler 1” BSPPF 280 QBNVB-F16 1 Coupler 1” BSPPF 150
QBNV-M16 1 Nipple 1” BSPPF 280 QBNVB-M16 1 Nipple 1” BSPPF 150
QBNV-F20 1.1/4 Coupler 1.1/4” BSPPF 100 QBNVB-F20 1.1/4 Coupler 1.1/4” BSPPF 85
QBNV-M20 1.1/4 Nipple 1.1/4” BSPPF 100 QBNVB-M20 1.1/4 Nipple 1.1/4” BSPPF 85
QBNV-F24 1.1/2 Coupler 1.1/2” BSPPF 100 QBNVB-F24 1.1/2 Coupler 1.1/2” BSPPF 85
QBNV-M24 1.1/2 Nipple 1.1/2” BSPPF 100 QBNVB-M24 1.1/2 Nipple 1.1/2” BSPPF 85
QBNV-F32 2 Coupler 2” BSPPF 100 QBNVB-F32 2 Coupler 2” BSPPF 85
QBNV-M32 2 Nipple 2” BSPPF 100 QBNVB-M32 2 Nipple 2” BSPPF 85































***NOTE** See Page J21 for technical details

J5

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

316 STAINLESS STEEL QBNV SERIES ISO B

• 316 Stainless Steel
• Conforms to ISO 7241-1 Series B
• Viton Seals


Part No Body Description Connection Working
Size Pressure
(“) (Bar)
QBNVS-F04 1/4 Coupler 1/4” BSPPF 320
QBNVS-M04 1/4 Nipple 1/4” BSPPF 320
QBNVS-F06 3/8 Coupler 3/8” BSPPF 260
QBNVS-M06 3/8 Nipple 3/8” BSPPF 260
QBNVS-F08 1/2 Coupler 1/2” BSPPF 260
QBNVS-M08 1/2 Nipple 1/2” BSPPF 260
QBNVS-F12 3/4 Coupler 3/4” BSPPF 210
QBNVS-M12 3/4 Nipple 3/4” BSPPF 210
QBNVS-F16 1 Coupler 1” BSPPF 210
QBNVS-M16 1 Nipple 1” BSPPF 210
QBNVS-F20 1.1/4 Coupler 1.1/4” BSPPF 100
QBNVS-M20 1.1/4 Nipple 1.1/4” BSPPF 100
QBNVS-F24 1.1/2 Coupler 1.1/2” BSPPF 100
QBNVS-M24 1.1/2 Nipple 1.1/2” BSPPF 100
QBNVS-F32 2 Coupler 2” BSPPF 100
QBNVS-M32 2 Nipple 2” BSPPF 100



QBNV SERIES
DUST CAPS AND PLUGS


Part No Body Description Material
Size (“)
QBNV-DC02 1/8 Cap Plastic
QBNV-DC04 1/4 Cap Plastic
QBNV-DC06 3/8 Cap Plastic
QBNV-DC08 1/2 Cap Plastic
QBNV-DC12 3/4 Cap Plastic
QBNV-DC16 1 Cap Plastic
QBNV-DP02 1/8 Plug Plastic
QBNV-DP04 1/4 Plug Plastic
QBNV-DP06 3/8 Plug Plastic
QBNV-DP08 1/2 Plug Plastic
QBNV-DP12 3/4 Plug Plastic
QBNV-DP16 1 Plug Plastic


***NOTE** See Page J21 for technical details

J6

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

STEEL QPS SERIES PUSH / PULL TYPE

• Carbon Steel
• Fits to ISO 7241-1 Series A 1/2” Male Tip
• Nitrile Seals
• Push/Pull Design Allows automatic release in
case of accidental pulls




Part No Body Description Connection Working
Size (“) Pressure
(Bar)
QPS-F08 1/2 Coupler 1/2” BSPPF 250
QPS-F083/4BSP 1/2 Coupler 3/4” BSPPF 250
QPS-F083/4UN 1/2 Coupler 3/4” UNOF 250
QPS-F083/8BSP 1/2 Coupler 3/8” BSPPF 250
QPS-F087/8UN 1/2 Coupler 7/8” UNOF 250
QPS-F08M18 1/2 Coupler M18X1.5F 250
QPS-F08M22 1/2 Coupler M22X1.5F 250


















































J7

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

STEEL QFF SERIES FLAT FACE 316 STAINLESS STEEL QFFS SERIES
FLAT FACE



• Carbon Steel • 316 Stainless Steel
• Flat Face • Flat Face
• Nitrile Seals • Viton Seals
• Interchangeable with other • Interchangeable with other
couplers made to ISO 16028 couplers made to ISO 16028




Part No Body Description Connection Working Part No Body Description Connection Working
Size (“) Pressure Size (“) Pressure
(Bar) (Bar)
QFF-F04 1/4 Coupler 1/4” BSPPF 500 QFFS-F04 1/4 Coupler 1/4” BSPPF 350
QFF-M04 1/4 Nipple 1/4” BSPPF 500 QFFS-M04 1/4 Nipple 1/4” BSPPF 350
QFF-F06 3/8 Coupler 3/8” BSPPF 350 QFFS-F06 3/8 Coupler 3/8” BSPPF 250
QFF-M06 3/8 Nipple 3/8” BSPPF 350 QFFS-M06 3/8 Nipple 3/8” BSPPF 250
QFF-F08 3/8 Coupler 1/2” BSPPF 350 QFFS-F08 3/8 Coupler 1/2” BSPPF 250
QFF-M08 3/8 Nipple 1/2” BSPPF 350 QFFS-M08 3/8 Nipple 1/2” BSPPF 250
QFF-F12 1/2 Coupler 3/4” BSPPF 350 QFFS-F12 1/2 Coupler 3/4” BSPPF 250
QFF-M12 1/2 Nipple 3/4” BSPPF 350 QFFS-M12 1/2 Nipple 3/4” BSPPF 250
QFF-F16 3/4 Coupler 1” BSPPF 350 QFFS-F16 3/4 Coupler 1” BSPPF 250
QFF-M16 3/4 Nipple 1” BSPPF 350 QFFS-M16 3/4 Nipple 1” BSPPF 250
QFF-F20 1 Coupler 1.1/4” BSPPF 350 QFFS-F20 1 Coupler 1.1/4” BSPPF 250
QFF-M20 1 Nipple 1.1/4” BSPPF 350 QFFS-M20 1 Nipple 1.1/4” BSPPF 250
QFF-F24 1.1/4 Coupler 1.1/2” BSPPF 350
QFF-M24 1.1/4 Nipple 1.1/2” BSPPF 350
QFF-F32 1.1/2 Coupler 2” BSPPF 250
QFF-M32 1.1/2 Nipple 2” BSPPF 250
QFF SERIES DUST CAPS

Part No Body Description Material
Size (“)
QFF-PCC04 1/4 Coupler Cap Plastic
QFF-PCC06 3/8 Coupler Cap Plastic
QFF-PCC08 1/2 Coupler Cap Plastic
QFF-PCC12 3/4 Coupler Cap Plastic
QFF-PCC16 1 Coupler Cap Plastic
QFF-PNC04 1/4 Nipple Cap Plastic
QFF-PNC06 3/8 Nipple Cap Plastic
QFF-PNC08 1/2 Nipple Cap Plastic
QFF-PNC12 3/4 Nipple Cap Plastic
QFF-PNC16 1 Nipple Cap Plastic






***NOTE** See Page J23 for technical details
J8

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

STEEL QVS SERIES SCREW TOGETHER 316 STAINLESS STEEL QVS SERIES

SCREW TOGETHER

• Carbon Steel • 316 Stainless Steel
• Screw together connection • Screw together connection
• Nitrile Seals • Viton Seals


Part No Body Description Connection Working Part No Body Description Connection Working
Size (“) Pressure Size (“) Pressure
(Bar) (Bar)
QVS-F04 1/4 Coupler 1/4” BSPPF 950 QVSS-F04 1/4 Coupler 1/4” BSPPF 950
QVS-M04 1/4 Nipple 1/4” BSPPF 950 QVSS-M04 1/4 Nipple 1/4” BSPPF 950
QVS-F06 3/8 Coupler 3/8” BSPPF 750 QVSS-F06 3/8 Coupler 3/8” BSPPF 750
QVS-M06 3/8 Nipple 3/8” BSPPF 750 QVSS-M06 3/8 Nipple 3/8” BSPPF 750
QVS-F08 1/2 Coupler 1/2” BSPPF 750 QVSS-F08 1/2 Coupler 1/2” BSPPF 750
QVS-M08 1/2 Nipple 1/2” BSPPF 750 QVSS-M08 1/2 Nipple 1/2” BSPPF 750
QVS-F12 3/4 Coupler 3/4” BSPPF 650 QVSS-F12 3/4 Coupler 3/4” BSPPF 650
QVS-M12 3/4 Nipple 3/4” BSPPF 650 QVSS-M12 3/4 Nipple 3/4” BSPPF 650
QVS-F16 1 Coupler 1” BSPPF 450 QVSS-F16 1 Coupler 1” BSPPF 450
QVS-M16 1 Nipple 1” BSPPF 450 QVSS-M16 1 Nipple 1” BSPPF 450
QVS-F20 1.1/4 Nipple 1.1/4” BSPPF 450 QVSS-F20 1.1/4 Nipple 1.1/4” BSPPF 450
QVS-M20 1.1/4 Nipple 1.1/4” BSPPF 450 QVSS-M20 1.1/4 Nipple 1.1/4” BSPPF 450
QVS-F24 1.1/2 Nipple 1.1/2” BSPPF 300 QVSS-F24 1.1/2 Nipple 1.1/2” BSPPF 300
QVS-M24 1.1/2 Nipple 1.1/2” BSPPF 300 QVSS-M24 1.1/2 Nipple 1.1/2” BSPPF 300
QVS-F32 2 Nipple 2” BSPPF 300 QVSS-F32 2 Nipple 2” BSPPF 300
QVS-M32 2 Nipple 2” BSPPF 300 QVSS-M32 2 Nipple 2” BSPPF 300


QVS SERIES SCREW TOGETHER
DUST CAPS AND PLUGS



Part No Body Description Material
Size (“)
QVS-DC04 1/4 Cap Steel
QVS-DC06 3/8 Cap Steel
QVS-DC08 1/2 Cap Steel
QVS-DC12 3/4 Cap Steel
QVS-DC16 1 Cap Steel
QVS-DP04 1/4 Plug Steel
QVS-DP06 3/8 Plug Steel
QVS-DP08 1/2 Plug Steel
QVS-DP12 3/4 Plug Steel
QVS-DP16 1 Plug Steel


***NOTE** See Page J25 for technical details

J9

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

STEEL Q231 SERIES SCREW TOGETHER FLAT FACE COUPLER


• Carbon Steel
• Screw together connection
• Nitrile Seals
• Interchangeable with Stucchi VEP Series


Part No Body Connection Working
Size (“) Pressure
(Bar)
Q231-F08RP 1/2 1/2” BSPPF 550
Q231-M08RP 1/2 1/2” BSPPF 550
Q231-F12RP 3/4 3/4” BSPPF 550
Q231-M12RP 3/4 3/4” BSPPF 550
Q231-F16RP 1 1” BSPPF 500
Q231-M16RP 1 1” BSPPF 500
Q231-F20RP 1.1/4 1.1/4” BSPPF 470
Q231-M20RP 1.1/4 1.1/4” BSPPF 470






Q231 SERIES SCREW TOGETHER

DUST CAPS AND PLUGS


Part No Body Description Material
Size (“)
Q231-DC08 1/2 Cap Aluminium
Q231-DC12 3/4 Cap Aluminium
Q231-DC16 1 Cap Aluminium
Q231-DC20 1.1/4 Cap Aluminium
Q231-DP08 1/2 Plug Aluminium
Q231-DP12 3/4 Plug Aluminium
Q231-DP16 1 Plug Aluminium
Q231-DP20 1.1/4 Plug Aluminium

















***NOTE** See Page J27 for technical details

J10

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

202 SERIES


HPA POPPET VALVE












STANDARD MALE MODELS
STEEL QPVV SERIES SCREW TOGETHER
FOR HYDRAULIC TOOLING DN ØA1 REF. E/C ØG L1 ØF L

• Carbon Steel 06 ¼” NPTF 202.11141BB 1200Bar * * * * *
• Screw together connection 10 ⅜” NPTF 202.11142BC 1200Bar 24 1 3/16” UN 38,88 18,99 72,75
• Nitrile Seals
STAINLESS STEEL MALE MODELS
Part No Body Description Connection Working
Size (“) Pressure DN ØA1 REF. E/C ØG L1 ØF L
(Bar)
QPVV-F04F 1/4 Coupler 1/4” NPTF 1200 06 ¼” NPTF 202.21121BB 1200Bar * * * * *
QPVV-F04RP 1/4 Coupler 1/4” BSPPF 1200 10 ⅜” NPTF 202.21122BC 1200Bar 24 1 3/16” UN 42,50 18,99 72,75
QPVV-M04F 1/4 Nipple 1/4” NPTF 1200
QPVV-M04RP 1/4 Nipple 1/4” BSPPF 1200
QPVV-F06F 3/8 Coupler 3/8” NPTF 1200
QPVV-F06M 3/8 Coupler 3/8” NPT 1200
QPVV-F06RP 3/8 Coupler 3/8” BSPPF 1200
QPVV-M06F 3/8 Nipple 3/8” NPTF 1200
QPVV-M06RP 3/8 Nipple 3/8” BSPPF 1200
STANDARD FEMALE MODELS

DN ØA REF. CH2 L2 ØE L
QPVV SERIES SCREW TOGETHER 06 ¼” NPTF M. 202.12141BM 1200Bar * * * *
DUST CAPS AND PLUGS 10 ⅜” NPTF M. 202.12142BN 1200Bar 22 45,50 34,50 72,75


STAINLESS STEEL FEMALE MODELS
Part No Body Description Material
Size (“)
DN ØA REF. CH2 L2 ØE L
QPVV-MDC04 1/4 Cap Steel
QPVV-MDC06 3/8 Cap Steel 06 ¼” NPTF M. 202.22121BM 1200Bar * * * *
QPVV-MDP04 1/4 Plug Steel 10 ⅜” NPTF M. 202.22122BN 1200Bar 22 45,50 34,50 72,75
QPVV-MDP06 3/8 Plug Steel



Interchanges with:
• Parker 3000 Series
• Faster PVVM Series
• Perfecting 300 Series
• Powerstream C38 Series
• Enerpac C-604
• Porta-Power



***NOTE** See Page J29 for technical details

J11

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

STEEL 5TV SCREW-TOGETHER



• Carbon Steel
• Rugged Construction
• 345 bar working pressure - all sizes
• 1380 bar burst pressure - all sizes
• Acme thread
• High flow rate


BSPP FEMALE THREAD
Part No Body Description
Size (“)
5TV-C-12BF 3/4 Coupler
5TV-N-12BF 3/4 Nipple
5TV-C-16BF 1 Coupler
5TV-N-16BF 1 Nipple
5TV-C-20BF 1.1/4 Coupler
5TV-N-20BF 1.1/4 Nipple
5TV-C-24BF 1.1/2 Coupler
5TV-N-24BF 1.1/2 Nipple
5TV-C-32BF 2 Coupler
5TV-N-32BF 2 Nipple




NPT FEMALE THREAD
Part No Body Description
Size (“)
5TV-C-12 3/4 Coupler
5TV-N-12 3/4 Nipple
5TV-C-16 1 Coupler
5TV-N-16 1 Nipple
5TV-C-20 1.1/4 Coupler
5TV-N-20 1.1/4 Nipple
5TV-C-24 1.1/2 Coupler
5TV-N-24 1.1/2 Nipple
5TV-C-32 2 Coupler
5TV-N-32 2 Nipple











***NOTE** See Page J30 for technical details

J12

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

5TV SERIES DUST CAPS AND PLUGS







Part No Body Description
Size (“)
5TV-DC-12 3/4 Coupler
5TV-DP-12 3/4 Nipple
5TV-DC-16 1 Coupler
5TV-DP-16 1 Nipple
5TV-DC-20 1.1/4 Coupler
5TV-DP-20 1.1/4 Nipple
5TV-DC-24 1.1/2 Coupler
5TV-DP-24 1.1/2 Nipple
5TV-DC-32 2 Coupler
5TV-DP-32 2 Nipple



















































***NOTE** See Page J30 for technical details

J13

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

140 SERIES



CVF








STEEL 140 SERIES WATER BLAST Quick couplings upon request and subjected to minimum quantities.
Nickel-palted product  add 011 at the end of the reference.


• Nickel Plated Carbon Steel
• Free flow, No Poppet Valves MALE (CARBON ST.)
• High Pressure Ratings
• For use with water blasters DN ØA CH1 C ØF L REF.
06 ¼” BSP 19 25 14,10 45,10 140.11001AB 700 Bar
Part No Body Description Connection Working 10 ⅜” BSP 22 28 18,90 48,50 140.11002AC 600 Bar
Size (“) Pressure
(Bar) 13 ½” BSP 27 33 20,40 55,50 140.11003AD 500 Bar
Q140-F04RP 1/4 Coupler 1/4” BSPPF 700
Q140-M04RP 1/4 Nipple 1/4” BSPPF 700
Q140-F06RP 3/8 Coupler 3/8” BSPPF 600
Q140-M06RP 3/8 Nipple 3/8” BSPPF 600
Q140-F08RP 1/2 Coupler 1/2” BSPPF 500
Q140-M08RP 1/2 Nipple 1/2” BSPPF 500








316 STAINLESS STEEL 140 SERIES

WATER BLAST FEMALE (CARBON ST.)

DN ØA CH2 B ØD L REF.
• 316 Stainless Steel
• Free flow, No Poppet Valves 06 ¼” BSP 22 35 29,50 45,10 140.12011AB 700 Bar
• High Pressure Ratings 10 ⅜” BSP 27 38 34 48,50 140.12012AC 600 Bar
• For use with water blasters 13 ½” BSP 32 45 39,50 55,50 140.12013AD 500 Bar



Part No Body Description Connection Working
Size (“) Pressure
(Bar)
Q140S-F04RP 1/4 Coupler 1/4” BSPPF 300
Q140S-M04RP 1/4 Nipple 1/4” BSPPF 300
Q140S-F06RP 3/8 Coupler 3/8” BSPPF 280
Q140S-M06RP 3/8 Nipple 3/8” BSPPF 280
Q140S-F08RP 1/2 Coupler 1/2” BSPPF 250
Q140S-M08RP 1/2 Nipple 1/2” BSPPF 250






***NOTE** See Page J32 for technical details

J14

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

136SERIES



DRF







STEEL 136 SERIES DIAGNOSTIC



STANDARD MODELS
• In accordance with ISO15171-1 and SAEJ1502
• Diagnostic Coupling
DN ØA NORMA REF. L L2 L3 CH1 ØD1
• Minimal air inclusion and spillage
1/8” NPTF 136.11110BL 74,8 40,8 17
ANSI B1.20.3
1/4” NPTF 136.11110BM 75 41 19
M14x1,5 ISO 6149-2 136.11110OF 74,5 40,5
Part No Body Description Connection Working 3/8” UNF 136.11110WA 72,8 38,8
Size (“) Pressure 17
(Bar) 7/16” UNF SAE J1926-2 136.11110WB 74,3 40,3
1/2” UNF 136.11110WC 70 36 19
Q136-F04F 1/8 Coupler 1/4” NPTF 420
9/16” UNF 136.11110WD 71 37 17
Q136-M7/16M 1/8 Nipple 7/16” UNOM 420 9/16” UNF 136.11110ZD
Q136-M9/16M 1/8 Nipple 9/16” UNOM 420 04 11/16” UN ISO 8434-3 136.11110ZE 420Bar 72,8 38,8 17,75 12,6
Q136-M04F 1/8 Nipple 1/4” NPTF 420 13/16” UN 136.11110ZG 74,5 40,5
7/16” UNF 136.11110YB 75,5 41,5 19
1/2” UNF ISO 8434-2 136.11110YC
9/16” UNF 136.11110YD 75,2 41,2
M12x1,5 136.11110QE
ISO 9974-2
M14x1,5 136.1110QF 75 41
1/8” BSP 136.11110AL 17
DIN 3852-2
1/4” BSP 136.11110AM 19
BULKHEADS

DN ØA NORMA REF. L L2 L3 CH1 ØD1
9/16” UNF 136.11110ZDP 60,3
11/16” UN ISO 8434-3 136.11110ZEP 62,8
13/16” UN 136.11110ZGP 77,1
04 420Bar 17,75 19 12,6
7/16” UNF 136.11110YBP 58
1/2” UNF ISO 8434-2 136.11110YCP 58
9/16” UNF 136.11110YDP 60







Manufactured according to ISO 15171-1, size DN04 under ISO 7241-2 specifications.









DUST CAP – 136.5450AA



***NOTE** See Page J33 for technical details

J15

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

120 SERIES



IFR DIN 2353 SAE
DIN 3852 / BSP





STEEL 120 SERIES TRAILER BRAKE MALE • Manufactured according to ISO 5676 /
ISO/TC23 NFU 16006 norms.
DN CH1 CH3 C ØF E L
SPECIAL OPTIONS:
13 32 24 51 29 23 * Male with plastic Cap 120.5433AC incorporated, add to
• Agricultural Trailer Brake Coupling 27 base code 010. (Minimum quantity: 250units)
• Compatible with Faster VF and Gromelle Q-9000
STANDARD MALE MODELS

DN ØA ØT REF.
M18x1,5 12L 120.11113JE
Part No Body Description Connection Working • The nut is included in the Bulkhead version 13 M20x1,5 Ø13,5 120.11113KFA 150Bar
120.11113JG
M22x,15
15L
Size (“) Pressure ½” BSP M. - 120.11113AO
(Bar) ½” BSP - 120.11113AD
MALE
Q120-F06RP 1/2 Coupler 3/8” BSPPF 150
DN CH1 C ØF E L
Q120-F08RP 1/2 Coupler 1/2” BSPPF 150
Q120-M08RP 1/2 Nipple 1/2” BSPPF 150 13 32 43 29 15 *










MALE

DN CH1 CH2 C ØF E L
24
13 32 51 29 31 *
27










FEMALE STANDARD FEMALE MODELS

DN CH2 B ØD L DN ØA REF.
13 27 57 45 * ⅜” BSP 120.12113AC
13 ½” BSP 120.12113AD 150 Bar
M18x1.5 120.12113NE
M20x1.5 120.12113NF





• Metal parking parts is included in all female parts



***NOTE** See Page J36 for technical details

J16

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

104 SERIES


DIN

104 SERIES

104 SERIES
DIN
INTEVA QNV SERIES
DIN

MALE STANDARD MODELS (POPPET)

DN CH1 C ØF L DN ØA MALE FEMALE
06 19 36 14,20 72 ¼” BSP 104.11111AB 104.12111AB
10 24 40,50 18,95 81 06 ¼” NPTF 104.11111BB 104.12111AB 350Bar
46
Size (DN) Size (“) CH1 (mm) C (mm) STANDARD MODELS (POPPET) 87,50 9/16” 18ORB 104.11111GC 104.12111GC
F (mm)
L (mm)
27
MALE
13
20,56
48
89,50
⅜” BSP
104.12112AC
104.11112AC
50 PPET)
30
FEMALE
ØA
MALE
DN CH1 MALE ØF L DN STANDARD MODELS (PO 27,95 91,50 10 ⅜” NPTF 104.11112BC 104.12112BC 300Bar
C
112
36
56
20
½” BSP
101.11113AD
101.12113AD
6 1/4 19.00 36.00 14.20 72.00 25 41 63 31,30 126
06
19
FEMALE B
MALE
ØA P
L
C
ØF
DN CH1 36 14,20 72 DN ¼” BS 104.11111AB 104.12111A 13 ½” NPTF 101.11113BD 101.12113BD 300Bar
18.95
81.00
10 10 40,50 3/8 18,95 24.00 81 40.50 ¼” NPTF 104.11111BB 104.12111AB 350Bar ¾” - 16ORB 101.11113GF 101.12113GF
24
06
06 19 36 1/2 14,20 27.00 72 46.00 ¼” BSP 104.11111AB 104.12111AB ⅞”- 14ORB 101.11113GH 101.12113GH
87,50
46
9/16” 18ORB 104.11111GC 104.12111GC
20.56
13
87.50
81
24
10 27 40,50 18,95 89,50 06 ¼” NPTF 104.11112AC 104.12111AB 350Bar ¾” BSP 104.11114AE 104.12114AE
104.11111BB
48
13
20,56
104.12112AC
⅜” BSP
87,50
56.00
27.95
112.00
20 46 3/4 36.00 10 9/16” 18ORB 104.11111GC 104.12111GC 300Bar 20 ¾” NPTF 104.11114BE 104.12114BE 250Bar
91,50
50
30
104.11112BC
⅜” NPTF
104.12112BC
13 27 48 1 20,56 41.00 63. ⅜” BSP 104.11112AC 104.12112AC 1” BSP 104.11115AF 104.12115AF
89,50
20
56
27,95
112
36
½” BSP
101.12113AD
101.11113AD
126.00
25
10 00
31.30
126
25 30 50 31,30 91,50 ⅜” NPTF 104.11112BC 104.12112BC 300Bar 25 1” NPTF 104.11115BF 104.12115BF 220Bar
41
63
101.12113BD
½” NPTF
101.11113BD
20 36 56 27,95 112 13 ¾” - 16ORB 101.11113GF 101.12113AD 300Bar
½” BSP
101.11113AD
101.12113GF
25 41 63 31,30 126 ½” NPTF 101.11113BD 101.12113BD
13 ⅞”- 14ORB 101.11113GH 101.12113GH 300Bar
101.12113GF
¾” - 16ORB 101.11113GF
¾” BSP
104.12114AE
104.11114AE
20 ⅞”- 14ORB 101.11113GH 101.12113GH 250Bar
¾” NPTF
104.11114BE
104.12114BE
¾” BSP
1” BSP
104.11115AF
104.12115AF
20 ¾” NPTF 104.11114AE 104.12114AE 250Bar
220Bar
25
104.11114BE
104.12114BE
104.11115BF
104.12115BF
1” NPTF
104.11115AF
1” BSP
25
Manufactured according to ISO 5675 norm 104.12115AF 220Bar
104.11115BF
104.12115BF
1” NPTF
FEMALE STANDARD MODELS (BALL)
Manufactured according to ISO 5675 norm
DN CH2 B ØD L DN ØA MALE FEMALE
Manufactured according to ISO 5675 norm
06 22 53,50 27 72 ¼” BSP 104.11211AB 104.12211AB
10 27 61 35 81 06 ¼” NPTF 104.11211BB 104.12211AB 350Bar
FEMALE STANDARD MODELS (BALL) 38 87,50 9/16” 18ORB 104.11211GC 104.12211GC
89,50
13
63,50
30
⅜” BSP
104.12212AC
104.11212AC
L (mm)
Size (DN) Size (“) CH2 (mm) B (mm) STANDARD MODELS (BALL) 91,50 10 ⅜” NPTF 104.11212BC 104.12212BC 300Bar
D (mm)
DN CH2 FEMALE ØD L DN ØA MALE 38 FEMALE 48 112 ½” BSP 101.11213AD 101.12213AD
B
20
85
96,50
25
06
27
72
22
MALE
FEMALE B
ØA P
DN CH2 53,50 ØD 22.00 L DN ¼” BS 104.11211AB 46 104.12211A 55 126 13 ½” NPTF 101.11213BD 101.12213BD 300Bar
B
72.00
53.50
1/4
27.00
6
10 27 61 35 81 06 ¼” NPTF 104.11211BB 104.12211AB 350Bar ¾” - 16ORB 101.11213GF 101.12213GF
06 22 53,50 27 27.00 72 61.00 ¼” BSP 104.11211AB 104.12211AB ⅞”- 14ORB 101.11213GH 101.12213GH
87,50
81.00
10
3/8
9/16” 18ORB 104.11211GC 104.12211GC
35.00
61
10 27 63,50 35 89,50 06 ¼” NPTF 104.11211BB 104.12211AB 350Bar ¾” BSP 104.11214AE 104.12214AE
81
38
13
30
104.12212AC
104.11212AC
⅜” BSP
10
13 1/2 30.00 63.50 ⅜” NPTF 104.11212BC 104.12212BC 300Bar 20 ¾” NPTF 104.11214BE 104.12214BE 250Bar
87.50
38.00
87,50
9/16” 18ORB 104.11211GC 104.12211GC
91,50
13 30 63,50 38 38.00 85.00 ⅜” BSP 104.11212AC 104.12212AC 1” BSP 104.11215AF 104.12215AF
89,50
38
20
48
112
85
½” BSP
101.12213AD
101.11213AD
3/4
48.00
20
112.00
126
25 46 96,50 55 91,50 10 ⅜” NPTF 104.11212BC 104.12212BC 300Bar 25 1” NPTF 104.11215BF 104.12215BF 220Bar
101.12213BD
½” NPTF
101.11213BD
20 38 85 1 48 46.00 13 50 ½” BSP 0 101.11213AD 101.12213AD 300Bar
112
55.0
96.
25
126.00
25 46 96,50 55 126 ¾” - 16ORB 101.11213GF 101.12213GF
½” NPTF
101.11213BD
101.12213BD
13 ⅞”- 14ORB 101.11213GH 101.12213GH 300Bar
¾” - 16ORB 101.11213GF
101.12213GF
¾” BSP
20 ⅞”- 14ORB 104.11214AE 104.12214AE 250Bar
101.11213GH 101.12213GH
104.11214BE
104.12214BE
¾” NPTF
¾” BSP
104.12215AF
104.11215AF
1” BSP
20 ¾” NPTF 104.11214AE 104.12214AE 250Bar
25
220Bar
104.11214BE
104.12214BE
104.11215BF
104.12215BF
1” NPTF
104.11215AF
1” BSP
Manufactured according to ISO 5675 norm 104.12215AF 220Bar
25
1” NPTF 104.11215BF 104.12215BF
Manufactured according to ISO 5675 norm
Manufactured according to ISO 5675 norm

J17
PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

104 SERIES 104 SERIES


DIN DIN








INTEVA QNV SERIES


MALE STANDARD MODELS (POPPET)

DN CH1 C ØF L DN ØA MALE FEMALE
06 19 36 14,20 72 ¼” BSP 104.11111AB 104.12111AB
10 24 40,50 18,95 81 06 ¼” NPTF 104.11111BB 104.12111AB 350Bar
46 87,50 9/16” 18ORB 104.11111GC 104.12111GC
27
13 48 20,56 89,50 ⅜” BSP 104.11112AC 104.12112AC
30 50 91,50 10 ⅜” NPTF 104.11112BC 104.12112BC 300Bar
20 36 56 27,95 112 ½” BSP 101.11113AD 101.12113AD
25 41 63 31,30 126 ½” NPTF 101.11113BD 101.12113BD
13 300Bar
¾” - 16ORB 101.11113GF 101.12113GF
⅞”- 14ORB 101.11113GH 101.12113GH
20 ¾” BSP 104.11114AE 104.12114AE 250Bar
¾” NPTF 104.11114BE 104.12114BE
1” BSP 104.11115AF 104.12115AF
25 1” NPTF 104.11115BF 104.12115BF 220Bar







Manufactured according to ISO 5675 norm




FEMALE STANDARD MODELS (BALL)

DN CH2 B ØD L DN ØA MALE FEMALE
06 22 53,50 27 72 ¼” BSP 104.11211AB 104.12211AB
10 27 61 35 81 06 ¼” NPTF 104.11211BB 104.12211AB 350Bar
87,50 9/16” 18ORB 104.11211GC 104.12211GC
13 30 63,50 38 89,50 ⅜” BSP 104.11212AC 104.12212AC
91,50 10 ⅜” NPTF 104.11212BC 104.12212BC 300Bar
20 38 85 48 112 ½” BSP 101.11213AD 101.12213AD
25 46 96,50 55 126 ½” NPTF 101.11213BD 101.12213BD
13 300Bar
¾” - 16ORB 101.11213GF 101.12213GF
⅞”- 14ORB 101.11213GH 101.12213GH
¾” BSP 104.11214AE 104.12214AE
20 250Bar
¾” NPTF 104.11214BE 104.12214BE
25 1” BSP 104.11215AF 104.12215AF 220Bar
1” NPTF 104.11215BF 104.12215BF







Manufactured according to ISO 5675 norm












J18

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

101 SERIES




101 SERIES ISO-A

101 SERIES
ISO-A
ISO-A
INTEVA QANV SERIES
MALE STANDARD MODELS

DN CH1 L1 ØF L DN ØA MALE FEMALE
06 19 36 11,80 72 06 ¼” BSP 101.11111AB 101.12111AB 350Bar
10
22
40,50
101.12111BB
MALE STANDARD MODELS 17,25 81 ¼” NPTF 101.11111BB 101.12112AC
⅜” BSP
46
101.11112AC
27
13
Size (DN) Size (“) CH1 (mm) L1 (mm) F (mm) STANDARD MODELS 20,56 87,50 ⅜” NPTF 101.11112BC 101.12112BC
L (mm)
30
L1
DN CH1 MALE ØF L DN ØA MALE FEMALE 10 300Bar
20 36 56 29 112 ⅜” BSPT 101.11112DC 101.12112DC
19
63
41
06
25
34,30 126
MALE
FEMALE
ØA
ØF
L
DN CH1 36 11,80 72 DN ¼” BSP 101.11111AB 101.12111AB 350Bar 9/16” 18ORB 101.11112GC 101.12112GC
L1
06
75
44,95 150
32
50
81
10 22 40,50 1/4 17,25 19.00 36.00 ¼” NPTF 101.11111BB 101.12111BB ½” BSP 101.11113AD 101.12113AD
72.00
6
11.80
40
06 27 36 11,80 72 ⅜” BSP 101.11112AC 83,5 55 167 ½” NPTF 101.11113BD 101.12113BD
19
46
101.12111AB
60 B 101.12112AC
101.11111A
¼” BSP
13 30 40,50 20,56 87,50 40.50 ⅜” NPTF 81.00 75 101. 65,10 210 13 M22x1,5 101.11113NG 101.12113NG 300Bar
350Bar
06
17.25
3/8
22.00
10
50
81
17,25
10
¼” NPTF
105 12111BB
22
101.11111BB 101.12112BC
101.11112BC
10
20 36 46 1/2 20,56 87,50 46.00 ⅜” BSPT 101.11112DC 101.12112AC 300Bar ¾” - 16ORB 101.11113GF 101.12113GF
27
56
29
112
⅜” BSP
101.11112AC 101.12112DC
87.50
27.00
13
20.56
13
30
⅜” NPTF
25 41 63 34,30 126 9/16” 18ORB 101.11112GC 101.12112BC ⅞” 14ORB 101.11113GH 101.12113GH
101.11112BC 101.12112GC
10
56 3/4
29 36.00
29.00
20
20
112
36
32 50 75 44,95 150 56.00 ⅜” BSPT 112.00 101.12113AD 300Bar ¾” BSP 101.11114AE 101.12114AE
101.11113AD
½” BSP
101.11112DC 101.12112DC
167
41
63
55
40 60 83,5 1 34,30 126 63.00 9/16” 18ORB 101.11112GC 101.12112GC ¾” NPTF 101.11114BE 101.12114BE
25
101.12113BD
101.11113BD
½” NPTF
126.00
25
41.00
34.30
50
50 75 105 44,95 150 13 M22x1,5 101.11113NG 101.12113AD 300Bar 20 1 1/16”- 250Bar
65,10 210
75
32
½” BSP
101.11113AD 101.12113NG
150.00
44.95
40 32 83,5 1.1/4 55 50.00 75.00 ¾” - 16ORB 101.11113GF 101.12113BD 12ORB 101.11114GK 101.12114GK
60
167
½” NPTF
101.11113BD 101.12113GF
50 75 105 1.1/2 65,10 210 83.50 M22x1,5 101.11113GH 101.12113GH 300Bar 1” BSP 101.11115AF 101.12115AF
13 ⅞” 14ORB
101.11113NG 101.12113NG
167.00
55.00
40
60.00
¾” BSP
101.12113GF
¾” - 16ORB 101.11113GF 101.12114AE 1” NPTF 101.11115BF 101.12115BF
101.11114AE
50 2 75.00 105.00 ⅞” 14ORB 210.00 101.12114BE 25 1 5/16”- 230Bar
65.10
101.11113GH 101.12113GH
101.11114BE
¾” NPTF
20 250Bar 101.11115GO 101.12115GO
101.11114AE
1 1/16”- 101.11114GK 101.12114GK 12ORB
¾” BSP
101.12114AE
12ORB
20 ¾” NPTF 101.11114BE 101.12114BE 250Bar 32 1 ¼” BSP 101.11116AG 101.12116AG 230Bar
1 1/16”- 101.11115AF 101.12115AF 1 ¼” NPTF 101.11116BG 101.12116BG
1” BSP
101.11114GK 101.12114GK
12ORB
101.12115BF
101.11115BF
1” NPTF
Manufactured according to ISO 7241-A norm, DN13 size meets as well 230Bar 40 1 ½” BSP 101.11117AH 101.12117AH 200Bar
25
101.12115AF
101.11115AF
1” BSP
ISO 5675 requirements. 1 5/16”- 101.11115GO 101.12115GO 1 ½” NPTF 101.11117BH 101.12117BH
101.12118AI
101.11118AI
2” BSP
12ORB
25 1” NPTF 101.11115BF 101.12115BF 230Bar 50 130Bar
L= lenght while quick coupling is connected. 101.11116AG 101.12116AG 2” NPTF 101.11118BI 101.12118BI
1 5/16”-
1 ¼” BSP
32 1 ¼” NPTF 101.11115GO 101.12115GO 230Bar
12ORB
101.11116BG 101.12116BG
1 ¼” BSP
101.11116AG 101.12116AG
Manufactured according to ISO 7241-A norm, DN13 size meets as well 40 1 ½” BSP 101.11117AH 101.12117AH 200Bar
32
230Bar
101.11116BG 101.12116BG
1 ½” NPTF
ISO 5675 requirements. 1 ¼” NPTF 101.11117BH 101.12117BH
101.12118AI
2” BSP
101.11118AI
Manufactured according to ISO 7241-A norm, DN13 size meets as well 50 1 ½” BSP 101.11117AH 101.12117AH 130Bar
40
200Bar
101.12117BH
2” NPTF
101.12118BI
101.11118BI
L= lenght while quick coupling is connected. 1 ½” NPTF 101.11117BH FEMALE
ISO 5675 requirements.
50 2” BSP 101.11118AI 101.12118AI 130Bar
L= lenght while quick coupling is connected. 2” NPTF 101.11118BI 101.12118BI L
DN CH2
L2
ØD
06 19 51 26 72
10
Size (DN) Size (“) CH2 (mm) L2 (mm) D (mm) L (mm) 24 58,50 32 81
FEMALE
13 30 63,50 38 87,50
L2
DN CH2 FEMALE ØD L 20 38 83,50 46 112
25
6 1/4 19.00 51.00 26.00 72.00 46 97 55 126
26
06
72
19
32
L2
DN CH2 51 3/8 ØD 24.00 L 58.50 32.00 81.00 50 117 70 150
10
10 24 58,50 32 81 40 60 133 84,50 167
72
50
06 30 63,50 38 30.00 63.50 38.00 87.50 75 165 100 210
51
19
26 87,50
13
1/2
13
10
20 38 83,50 46 112
81
58,50
24
32
38 38.00
25
30
46
13 20 63,50 3/4 55 87,50 83.50 46.00 112.00
97
126
46
117
38
32
20 50 83,50 70 46.00 97.00 55.00 126.00
150
112
1
25
97
55
126
40 60 133 84,50 167
25
46
70 50.00
32
117 1.1/4
150
50 75 165 100 210 117.00 70.00 150.00
32
50
40 60 133 84,50 167
1.1/2
210
75
50 40 165 100 60.00 133.00 84.50 167.00
50 2 75.00 165.00 100.00 210.00
Manufactured according to ISO 7241-A norm, DN13 size meets as well
ISO 5675 requirements
L= lenght while quick coupling is connected.
Manufactured according to ISO 7241-A norm, DN13 size meets as well
ISO 5675 requirements
Manufactured according to ISO 7241-A norm, DN13 size meets as well
L= lenght while quick coupling is connected.
ISO 5675 requirements
L= lenght while quick coupling is connected. J19
PH: 0800 FITTINGS 24 HOURS.

Return to Start of Section Return to Main Index

101 SERIES

101 SERIES ISO-A



ISO-A




INTEVA QANV SERIES
MALE STANDARD MODELS

DN CH1 L1 ØF L DN ØA MALE FEMALE
06 19 36 11,80 72 ¼” BSP 101.11111AB 101.12111AB
10 22 40,50 17,25 81 06 ¼” NPTF 101.11111BB 101.12111BB 350Bar
27 46 ⅜” BSP 101.11112AC 101.12112AC
13 20,56 87,50
30 ⅜” NPTF 101.11112BC 101.12112BC
20 36 56 29 112 10 ⅜” BSPT 101.11112DC 101.12112DC 300Bar
25 41 63 34,30 126 9/16” 18ORB 101.11112GC 101.12112GC
32 50 75 44,95 150 ½” BSP 101.11113AD 101.12113AD
40 60 83,5 55 167 ½” NPTF 101.11113BD 101.12113BD
50 75 105 65,10 210 13 M22x1,5 101.11113NG 101.12113NG 300Bar
¾” - 16ORB 101.11113GF 101.12113GF
⅞” 14ORB 101.11113GH 101.12113GH
¾” BSP 101.11114AE 101.12114AE
¾” NPTF 101.11114BE 101.12114BE
20 250Bar
1 1/16”- 101.11114GK 101.12114GK
12ORB
1” BSP 101.11115AF 101.12115AF
1” NPTF 101.11115BF 101.12115BF
25 230Bar
1 5/16”-
12ORB 101.11115GO 101.12115GO
1 ¼” BSP 101.11116AG 101.12116AG
32 230Bar
1 ¼” NPTF 101.11116BG 101.12116BG
Manufactured according to ISO 7241-A norm, DN13 size meets as well 40 1 ½” BSP 101.11117AH 101.12117AH 200Bar
ISO 5675 requirements. 1 ½” NPTF 101.11117BH 101.12117BH
2” BSP
101.12118AI
101.11118AI
50 130Bar
L= lenght while quick coupling is connected. 2” NPTF 101.11118BI 101.12118BI
FEMALE

DN CH2 L2 ØD L
06 19 51 26 72
10 24 58,50 32 81
13 30 63,50 38 87,50
20 38 83,50 46 112
25 46 97 55 126
32 50 117 70 150
40 60 133 84,50 167
50 75 165 100 210















Manufactured according to ISO 7241-A norm, DN13 size meets as well
ISO 5675 requirements
L= lenght while quick coupling is connected.





J20
PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

103 SERIES

103 SERIES CARBON STEEL /


ISO-B AISI 316
CARBON STEEL /
ISO-B AISI 316

INTEVA QBNV SERIES



STANDARD CARBON STEEL MODELS
MALE
STANDARD CARBON STEEL MODELS ØF L DN ØA MALE FEMALE
DN
L1
CH1
MALE
04 14 30 10,90 60 04 ⅛” BSP 103.11110AA 103.12110AA 400Bar
FEMALE
DN CH1 L1 ØF L DN ØA MALE 06 19 36 14,20 72 ⅛” NPTF 103.11110BA 103.12110BA
10 24 40,50 19,10 81 ¼” BSP 103.11111AB 103.12111AB
04 14 30 10,90 60 04 ⅛” BSP 103.11110AA 103.12110AA 46 92 06 ¼” NPTF 103.11111BB 103.12111BB 380Bar
13
400Bar 23,55
27
06 19 36 14,20 72 ⅛” NPTF 103.11110BA 103.12110BA 56 31,45 112 ⅜” BSP 103.11112AC 103.12112AC
20
36
10 24 40,50 19,10 81 ¼” BSP 103.11111AB 103.12111AB 63 126 10 ⅜” NPTF 103.11112BC 103.12112BC 350Bar
25
380Bar 37,80
41
13 27 46 23,55 92 06 ¼” NPTF 103.11111BB 103.12111BB ¾”-16ORB 103.11112GF 103.12112GF
20 36 56 31,45 112 ⅜” BSP 103.11112AC 103.12112AC ½” BSP 103.11113AD 103.12113AD
25 41 63 37,80 126 10 ⅜” NPTF 103.11112BC 103.12112BC 350Bar ½” NPTF 103.11113BD 103.12113BD
¾”-16ORB 103.11112GF 103.12112GF 13 ¾” - 16ORB 103.11113GF 103.12113GF 320Bar
½” BSP 103.11113AD 103.12113AD ⅞” 14ORB 103.11113GH 103.12113GH
½” NPTF 103.11113BD 103.12113BD
13 320Bar ¾” BSP 103.11114AE 103.12114AE
¾” - 16ORB 103.11113GF 103.12113GF ¾” NPTF 103.11114BE 103.12114BE
⅞” 14ORB 103.11113GH 103.12113GH 20 1 1/16”- 300Bar
¾” BSP 103.11114AE 103.12114AE 12ORB 103.11114GK 103.12114GK
20 ¾” NPTF 103.11114BE 103.12114BE 300Bar 1” BSP 103.11115AF 103.12115AF
1 1/16”-
12ORB 103.11114GK 103.12114GK 25 1” NPTF 103.11115BF 103.12115BF 280Bar
1 5/16”-
1” BSP 103.11115AF 103.12115AF 12ORB 103.11115GO 103.12115GO
1” NPTF 103.11115BF 103.12115BF
25 280Bar
1 5/16”- 103.11115GO 103.12115GO
12ORB
STANDARD AISI 316 MODELS
FEMALE
DN CH2
FEMALE STANDARD AISI 316 MODELS L2 ØD L DN ØA MALE FEMALE
04 14 49 22 60 04 ⅛” BSP 103.21120AA 103.22120AA 320Bar
FEMALE
DN CH2 L2 ØD L DN ØA MALE 06 19 57,70 27 72 ⅛” NPTF 103.21120BA 103.22120BA
10 24 65,50 35 81 ¼” BSP 103.21121AB 103.22121AB
04 14 49 22 60 04 ⅛” BSP 103.21120AA 103.22120AA 320Bar 42 92 06 ¼” NPTF 103.21121BB 103.22121BB 280Bar
27
74
13
06 19 57,70 27 72 ⅛” NPTF 103.21120BA 103.22120BA 90 52 112 ⅜” BSP 103.21122AC 103.22122AC
20
36
10 24 65,50 35 81 06 ¼” BSP 103.21121AB 103.22121AB 280Bar 60 126 10 ⅜” NPTF 103.21122BC 103.22122BC 260Bar
103
41
25
13 27 74 42 92 ¼” NPTF 103.21121BB 103.22121BB ¾”-16ORB Upon request
20 36 90 52 112 ⅜” BSP 103.21122AC 103.22122AC ½” BSP 103.21123AD 103.22123AD
25 41 103 60 126 10 ⅜” NPTF 103.21122BC 103.22122BC 260Bar ½” NPTF 103.21123BD 103.22123BD
¾”-16ORB Upon request 13 260Bar
½” BSP 103.21123AD 103.22123AD ¾” - 16ORB Upon request
Upon request
⅞” 14ORB
13 ½” NPTF 103.21123BD 103.22123BD 260Bar ¾” BSP 103.21124AE 103.22124AE
¾” - 16ORB Upon request ¾” NPTF 103.21124BE 103.22124BE
⅞” 14ORB Upon request 20 1 1/16”- 210Bar
¾” BSP 103.21124AE 103.22124AE 12ORB Upon request
¾” NPTF 103.21124BE 103.22124BE
20 210Bar 1” BSP 103.21125AF 103.22125AF
1 1/16”- Upon request 1” NPTF 103.21125BF 103.22125BF
12ORB 25 1 5/16”- 210Bar
1” BSP 103.21125AF 103.22125AF 12ORB Upon request
1” NPTF 103.21125BF 103.22125BF
25 210Bar
1 5/16”- Upon request
12ORB

J21

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

103 SERIES

103 SERIES ISO-B CARBON STEEL



ISO-B CARBON STEEL



INTEVA QBNV SERIES

















































































J22

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

131 SERIES


CPR
131 SERIES

131 SERIES
CPR

CPR
INTEVA QFF SERIES

STANDARD MODELS
MALE
DN CH1 B ØF L DN ØA MALE FEMALE
07 22 48 16,20 85,50 07 ¼” BSP 131.11111AB 131.12111AB 500Bar
19,80
24
62,50
MALE 09 STANDARD MODELS 116,50 ¼” NPTF 131.11111BB 131.12111BB
13 27 62,50 24,50 134,50 ⅜” BSP 131.11112AC 131.12112AC
27
36
15
70,50
FEMALE
MALE
Size (DN) Size (“)
L (mm)
ØF
DN CH1 B CH1 (mm) L B (mm) DN F (mm) ØA STANDARD MODELS 132 09 ⅜” NPTF 131.11112BC 131.12112BC 350Bar
½ ” BSP
MALE
131.11112AD 131.12112DC
154
82,50
45
17
30
36
90
173
21
07 22 48 16,20 85,50 07 ¼” BSP 55 131.11111AB 131.12111AB 500Bar ½ ” NPTF 131.11112BD 131.12112BD
131.11112GF 131.12112GF
MALE
FEMALE
ØA 30
111
215
57
ØF
24
DN
B
L
09 CH1 62,50 19,80 116,50 DN ¼” NPTF 70 131.11111BB 131.12111BB ¾ ”-16ORB 131.11112GH 131.12112GH
1/4
7
22.00
48.00
85.50
16.20
⅞ ”-14ORB
45
125
73
13 27 62,50 24,50 134,50 ⅜” BSP 75 131.11112AC 131.12112AC
131.11111AB 131.12111AB
48
¼” BSP
85,50
16,20
22
07
3/8
15 9 36 70,50 24.00 132 62.50 07 19.80 ⅜” NPTF 131.11112BC 131.12112BC 500Bar ½” BSP 131.11113AD 131.12113AD
116.50
27
131.11111BB 131.12111BB
¼” NPTF
62,50
24
09
30
17 45 82,50 19,80 116,50 09 19.80 ½ ” BSP 131.11112AD 131.12112DC 350Bar ½” NPTF 131.11113BD 131.12113BD
154
24.00
13 9
116.50
1/2
62.50
131.11112AC 131.12112AC
⅜” BSP
27
24,50
134,50
62,50
21 55 90 36 173 ½ ” NPTF 131.11112BD 131.12112BD 13 ¾” BSP 131.11113AE 131.12113AE 350Bar
131.11112BC 131.12112BC
⅜” NPTF
27
15
36
132
111
3/4
134.50
30 13 70 70,50 27.00 215 62.50 24.50 ¾ ”-16ORB 131.11112GF 131.12112GF ¾” NPTF 131.11113BE 131.12113BE
57
½ ” BSP
131.11112AD 131.12112DC
30
82,50
154
17
45
45 75 125 73 09 ⅞ ”-14ORB 131.11112GH 131.12112GH 350Bar ⅞” - 14ORB 131.11113GH 131.12113GH
131.11112BD 131.12112BD
21 17 55 1 90 45.00 173 82.50 30.00 ½ ” NPTF 131.11113AD 131.12113AD 1 1/16” 12ORB 131.11113GK 131.12113GK
154.00
36
½” BSP
131.11112GF 131.12112GF
30 70 111 57 215 ¾ ”-16ORB 131.11113BD 131.12113BD ¾” BSP 131.11114AE 131.12114AE
½” NPTF
173.00
131.11112GH 131.12112GH
125
45 21 75 1.1/4 55.00 90.00 36.00 ⅞ ”-14ORB 131.11113AE 131.12113AE 15 ¾” NPTF 131.11114BE 131.12114BE 350Bar
73
¾” BSP
½” BSP
131.11113AD 131.12113AD
57.00
30 1.1/2 70.00 111.00 13 ¾” NPTF 131.11113BE 131.12113BE 350Bar 1 1/16”-12ORB 131.11114GK 131.12114GK
215.00
131.11113BD 131.12113BD
½” NPTF
1” BSP
⅞” - 14ORB
45 2 75.00 125.00 73.00 ¾” BSP 131.11113GH 131.12113GH 17 1” NPTF 131.11115AF 131.12115AF 350Bar
131.11113AE 131.12113AE
131.11115BF 131.12115BF
13 1 1/16” 12ORB 131.11113GK 131.12113GK 350Bar
131.11113BE 131.12113BE
¾” NPTF 131.11114AE 131.12114AE 1 5/16”-12ORB 131.11115GO 131.12115GO
¾” BSP
131.11113GH 131.12113GH
¾” NPTF
15 ⅞” - 14ORB 131.11114BE 131.12114BE 350Bar 1 ¼” BSP 131.11116AG 131.12116AG 350Bar
21
1 1/16” 12ORB 131.11113GK 131.12113GK
1 1/16”-12ORB 131.11114GK 131.12114GK 1 ¼” NPTF 131.11116BG 131.12116BG
131.11114AE 131.12114AE
¾” BSP
1” BSP 131.11115AF 131.12115AF 30 1 ½” BSP 131.11117AH 131.12117AH 350Bar
15
131.11114BE 131.12114BE
350Bar
¾” NPTF
1” NPTF
131.11115BF 131.12115BF
17 1 1/16”-12ORB 131.11114GK 131.12114GK 350Bar 1 ½” NPTF 131.11117BH 131.12117BH
1 5/16”-12ORB 131.11115GO 131.12115GO 45 2” BSP 131.11118AI 131.12118AI 250Bar
1” BSP
131.11115AF 131.12115AF
1 ¼” BSP 131.11116AG 131.12116AG
21 1 ¼” NPTF 131.11116BG 131.12116BG 350Bar
1” NPTF
131.11115BF 131.12115BF
350Bar
17
1 5/16”-12ORB 131.11115GO 131.12115GO
131.11117AH 131.12117AH
1 ½” BSP
FEMALE
30 1 ¼” BSP 131.11116AG 131.12116AG 350Bar
21 1 ½” NPTF 131.11117BH 131.12117BH 350Bar
1 ¼” NPTF
131.11116BG 131.12116BG
131.12118AI 250Bar
131.11118AI
45 1 ½” BSP 131.11117AH 131.12117AH
2” BSP
L
C
DN CH2
ØD
30 350Bar
1 ½” NPTF 131.11117BH 131.12117BH
28
48
22
07
85,50
131.11118AI
L (mm)
D (mm)
Size (DN) Size (“) CH2 (mm) C (mm) 45 2” BSP 27 64,50 131.12118AI 250Bar
09
32
116,50
FEMALE
13 32 80,50 38 134,50
15 36 78 42 132
DN CH2 1/4 C 22.00 L 28.00 85.50 45 92,50 48 154
ØD
48.00
FEMALE
7
17
21
07 22 3/8 48 27.00 85,50 32.00 116.50 55 105 55 173
28
64.50
9
09 CH2 64,50 32 116,50 30 65 132,50 80 215
L
ØD
C
DN
27
9
64.50
80,50 27.00
45
13 32 1/2 48 38 134,50 32.00 116.50 80 165 100
28
85,50
07
22
42
15 36 64,50 32.00 116,50 38.00 134.50
132
78
80.50
13
27 3/4
09
32
17 45 92,50 48 154
38
13
32
21 55 1 80,50 45.00 134,50 48.00 154.00
55
105
173 92.50
17
132
42
36
15
78
30 65 132,50 80 215 55.00 173.00
45 1.1/4
154
105.00
17
21
92,50 55.00
48
45 80 165 100
21 55 105 55 173
30 1.1/2 65.00 132.50 80.00 215.00
30 65 132,50 80 215
45 80 2 165 80.00 165.00 100.00
100
45

J23
PH: 0800 FITTINGS 24 HOURS.

Return to Start of Section Return to Main Index

131 SERIES
131 SERIES CPR



CPR





INTEVA QFF SERIES


STANDARD MODELS
MALE
DN CH1 B ØF L DN ØA MALE FEMALE
07 22 48 16,20 85,50 07 ¼” BSP 131.11111AB 131.12111AB 500Bar
09 24 62,50 19,80 116,50 ¼” NPTF 131.11111BB 131.12111BB
13 27 62,50 24,50 134,50 ⅜” BSP 131.11112AC 131.12112AC
15 36 70,50 27 132 ⅜” NPTF 131.11112BC 131.12112BC
17 45 82,50 30 154 09 ½ ” BSP 131.11112AD 131.12112DC 350Bar
21 55 90 36 173 ½ ” NPTF 131.11112BD 131.12112BD
30 70 111 57 215 ¾ ”-16ORB 131.11112GF 131.12112GF
45 75 125 73 ⅞ ”-14ORB 131.11112GH 131.12112GH
½” BSP 131.11113AD 131.12113AD
½” NPTF 131.11113BD 131.12113BD
13 ¾” BSP 131.11113AE 131.12113AE 350Bar
¾” NPTF 131.11113BE 131.12113BE
⅞” - 14ORB 131.11113GH 131.12113GH
1 1/16” 12ORB 131.11113GK 131.12113GK
¾” BSP 131.11114AE 131.12114AE
15 ¾” NPTF 131.11114BE 131.12114BE 350Bar
1 1/16”-12ORB 131.11114GK 131.12114GK
1” BSP 131.11115AF 131.12115AF
17 1” NPTF 131.11115BF 131.12115BF 350Bar
1 5/16”-12ORB 131.11115GO 131.12115GO
1 ¼” BSP 131.11116AG 131.12116AG
21 350Bar
1 ¼” NPTF 131.11116BG 131.12116BG
1 ½” BSP 131.11117AH 131.12117AH
30 350Bar
1 ½” NPTF 131.11117BH 131.12117BH
45 2” BSP 131.11118AI 131.12118AI 250Bar

FEMALE

DN CH2 C ØD L
07 22 48 28 85,50
09 27 64,50 32 116,50
13 32 80,50 38 134,50
15 36 78 42 132
17 45 92,50 48 154
21 55 105 55 173
30 65 132,50 80 215
45 80 165 100

























J24

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

203 SERIES



203 SERIES 3 SERIES TGW
20

TGW
TGW


INTEVA QVS SERIES


STANDARD MODELS
MALE
DN ØA MALE FEMALE
DN E/C C ØF ØG L
STANDARD MODELS ARD MODELS
STAND
¼” BSP
203.11111AB 203.12111AB
36
06
MALE E
Size (DN) E/C (mm) C (mm) F (mm) 19 G (mm) 14,90 M27x1,5 72 06 ¼” NPTF 203.11111BB 203.12111BB 950Bar
MAL Size (“)
L (mm)
10
M
DN 22 Ø ØA A 40,50 18,95 M30x1,5 FE 81 ⅜” BSP 203.11112AC 203.12112AC
DN
FEMALE MALE
MALE ALE
22
M35x1,5
92
ØG
DN E/C E/C
DN C C ØF ØG L L 13 27 46 28,95 M45x1,5 112 10 ⅜” NPTF 203.11112BC 203.12112BC
ØF
56
35
20
¼” BSP SP
203.11111AB 203.12111AB 11111AB 203.12111AB
72.
¼” B M27x1.5
14,90 M27x1,5 90 M27x1,5
36
72
19
06 19 6 36 14, 1/4 19 72 36.00 14.90 41 63 203.00 M54x1,5 126 950B ½” BSP 203.11113AD 203.12113AD 750Bar
06
06
36
06 25
950Bar ar 13
203.11111BB 203.12111BB 11111BB 203.12111BB
¼” NPTF PTF
40,50 18,95 M30x1,5 50 18,95 M30x1,5
10
22
10 22 40, 3/8 22 81 18.95 ¼” N 75 203. M70x2 150 ½” NPTF 203.11113BD 203.12113BD
10
32
81.00
58 M30x1.5
49,80
81 40.50
⅜”
203.11112AC 203.12112AC 11112AC 203.12112AC
⅜” BSP BSP
22
46
13
92
27
13 27 46 22 M M35x1,5 35x1,5 92 10 61 83,50 203. M78x2 167 20 ¾” BSP 203.11114AE 203.12114AE 650Bar
10 40
55
⅜” NPTF NPTF
203.11112BC 203.12112BC 11112BC 203.12112BC
92.00
20
35
56
20 35 13 56 28, 1/2 27 46.00 22.00 ⅜” M35x1.5 203. M92x2 237 750B ¾” NPTF 203.11114BE 203.12114BE
28,95 M45x1,5 112 95 M45x1,5 112
71
50
69,40
750Bar ar
118
203.11113AD 203.12113AD 11113AD 203.12113AD
½” BSP SP
63
25 41 20 63 36 3/4 M M54x1,5 126 54x1,5 126 56.00 28.95 ½” B 203. 25 1” BSP 203.11115AF 203.12115AF
25
36
41
13
13
112.00
35
M45x1.5
203.11113BD 203.12113BD 11113BD 203.12113BD
½” NPTF PTF
58
49,80 80
32 58 75 49, M M70x2 70x2 150 ½” N 203. 1” NPTF 203.11115BF 203.12115BF 450Bar
150
32
75
203.11114AE 203.12114AE 11114AE 203.12114AE
¾” BSP SP
55 1
167 63.00
M54x1.5
126.00
83,50 50
61
40 61 25 55 M 41 167 36.00 ¾” B 203. 650B 1 ¼” BSP 203.11116AG 203.12116AG
M78x2 78x2
40
83,
20
20
650Bar ar 32
¾” NPTF PTF
203.11114BE 203.12114BE 11114BE 203.12114BE
237
71
50
69,40 40
50 71 32 118 69, 1.1/4 M M92x2 92x2 237 75.00 49.80 ¾” N 203. 1 ¼” NPTF 203.11116BG 203.12116BG
118
M70x2
58
150.00
203.11115AF 203.12115AF 11115AF 203.12115AF
25 1 1” BSP ” BSP 203. 40 1 ½” BSP 203.11117AH 203.12117AH
25
203.
203.11115BF 203.12115BF 11115BF 203.12115BF
1” NPTF ” NPTF
M78x2
167.00
40 1.1/2 61 83.50 55.00 1 1 1 ¼” BSP ¼” BSP 203. 450B 1 ½” NPTF 203.11117BH 203.12117BH 300Bar
450Bar ar
203.11116AG 203.12116AG 11116AG 203.12116AG
2” BSP
32
32
50 2 71 118.00 69.40 1 1 ¼” NPTF ¼” NPTF 203. 50 2” NPTF 203.11118AI 203.12118AI
M92x2
237.00
203.11116BG 203.12116BG 11116BG 203.12116BG
203.12118BI
203.11118BI
203.11117AH 203.12117AH 11117AH 203.12117AH
1 1 ½” BSP ½” BSP 203.
40
40
203.11117BH 203.12117BH 11117BH 203.12117BH
1 1 ½” NPTF ½” NPTF 203. 300B
300Bar ar
203.11118AI 11118AI
203.12118AI 12118AI
2 2” BSP ” BSP 203. 203.
50
50
203.12118BI 12118BI
203.11118BI 11118BI
2 2” NPTF ” NPTF 203. 203.
FEMALE
DN E/C B CH1 L
L (mm)
Size (DN) Size (“) E/C (mm) B (mm) CH1 19 59 L (mm) 32 72
FEMALE EMALE
06
F
(mm) 22 67 36 81
102
E/C
DN E/C B B CH1 L L 13 27 73,50 41 92
DN
CH1
20 35 89,50 50 112
72
06 19 59 1/4 32 72 59.00 32.00 41 105,50 72.00 65 126
06
59
72.00
19 6
25
32 19
36
81
67
102
22
102 22 67 36 81 32 58 130,50 80 150
81.00
81.00
41
13
73,50 50
27
13 27 10 73, 3/8 41 22 92 67.00 36.00 61 143,50 85 167
92
40
20
89,50 50
112
35
20 35 13 89, 1/2 50 27 112 73.50 41.00 71 203,50 92.00 105 237
50
50
92.00
126
41
25 41 105, 65 126
25
65
105,50 50
58 20
80 35
130,50 50 3/4
32 58 130, 80 150 89.50 50.00 112.00 112.00
150
32
40 61 25 143, 1 85 41 167 105.50 65.00 126.00 126.00
40
143,50 50
85
61
167
203,50 50
50
105
237
50 71 203, 105 237
71
32 1.1/4 58 130.50 80.00 150.00 150.00
40 1.1/2 61 143.50 85.00 167.00 167.00
50 2 71 203.50 105.00 237.00 237.00

J25
PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index

203 SERIES

203 SERIES
203 SERIES TGW

TGW
TGW



INTEVA QVS SERIES


STANDARD MODELS
MALE
DN ØA MALE FEMALE
DN E/C C ØF ØG L
06 19 36 14,90 M27x1,5 72 06 ¼” BSP 203.11111AB 203.12111AB 950Bar
10 22 40,50 18,95 M30x1,5 81 ¼” NPTF 203.11111BB 203.12111BB
⅜” BSP
13 27 46 22 M35x1,5 92 10 ⅜” NPTF 203.11112AC 203.12112AC
203.11112BC 203.12112BC
20 35 56 28,95 M45x1,5 112 750Bar
25 41 63 36 M54x1,5 126 13 ½” BSP 203.11113AD 203.12113AD
32 58 75 49,80 M70x2 150 ½” NPTF 203.11113BD 203.12113BD
40 61 83,50 55 M78x2 167 20 ¾” BSP 203.11114AE 203.12114AE 650Bar
50 71 118 69,40 M92x2 237 ¾” NPTF 203.11114BE 203.12114BE
25 1” BSP 203.11115AF 203.12115AF
1” NPTF 203.11115BF 203.12115BF
1 ¼” BSP 203.11116AG 203.12116AG 450Bar
32
1 ¼” NPTF 203.11116BG 203.12116BG
40 1 ½” BSP 203.11117AH 203.12117AH
1 ½” NPTF 203.11117BH 203.12117BH 300Bar
2” BSP 203.11118AI 203.12118AI
50 2” NPTF 203.11118BI 203.12118BI






FEMALE

DN E/C B CH1 L
06 19 59 32 72
102 22 67 36 81
13 27 73,50 41 92
20 35 89,50 50 112
25 41 105,50 65 126
32 58 130,50 80 150
40 61 143,50 85 167
50 71 203,50 105 237































J26

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index


















   
      

           


         
           
         
         
         
          
         
         
  
   
   
  
   
  
  
   
  
  
    
  
  
 
  
  
 
  
    






       
       
       
       
       
       
       
       
       
       

















J27

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index















   

       
      
        
        
        
        
        
        
        
        
        
























































J28

PH: 0800 FITTINGS 24 HOURS.
Return to Start of Section Return to Main Index