Whitening System - smileperfected.com

User’s Guide
Dual-Mode Light

Whitening System
430-470 nm
“Cool Blue Light” for Whitening Teeth

Shade Guide Matching
5500oK White Light
Consistent and Accurate Shade Matching

SM;)E PERFECTED  USER GUIDE 1

Assembly & Operating Instructions

Should your light exhibit defects in materials or workmanship it will be repaired or replaced for you at our option at no
charge to you (shipping and handling charges may apply) for one year from date of original purchase. Warranty does not
cover physical damage or abuse resulting from use by untrained personnel. Warranty is void if repair is preformed or
attempted by unauthorized personnel.
Warranty extensions programs are available; please contact your sales representative for details of current programs. To
assure the lowest down time, your light may be replaced with a refurbished unit.

Specifications: 100 to 240 vac 50-60 Hz
72 watts
Power Supply
Operating Voltage Light emitting Diodes
Power draw maximum 135 lm

Light source 430-470-nm
Light output, typical on axis Broad spectrum 5500K
Wavelength of light emission
110 ̊ F/43.4 ̊ C
Whitening mode 8-bit microprocessor
Inspection mode
Surface temperature at head, maximum UL, CSA, CE

Timer Control
Safety approval

If you have any questions or concerns regarding the Sm;)e Perfected™ Whitening System please contact us
at [email protected] or visit us at www.smileperfected.com for more information.

Sm;)e Perfected Quick Start Guide

1. Open Stand Carton and Assemble Stand
2. Open Light Box; carefully remove light and power supply
3. Fasten light to stand top shelf; tighten clamp by turning knob clockwise
4. Plug power supply into power outlet
5. Plug coaxial connector on power supply cord into mating connector on the bottom of the clamp
6. Set timer to desired setting
7. Position patient in the chair so they are comfortable
8. Position the light lens close to the mouth of the patient. Press White/Blue button to activate the white light.

Using the shade guide light with a shade guide will provide a consistent and accurate shade match. Note the
shade. Press the White/Blue button three times to turn off the light.
9. Use the vitamin E swabs to cover and protect the lips and gums
10. Remove the mouthpiece from the protective foil packet. Either a dental professional or a patient inserts the
pre-loaded silicone mouthpiece into the mouth. Make sure that the gel and tray are pressed evenly against
the teeth
11. Position the light head lens against the front of the mouthpiece. Press start. The timer will count down from
the pre-set time to zero then emit a beep tone and turn off at the end of the cycle.
12. Repeat the process if desired.
13. Have the patient rinse there mouth with water or mouthwash to remove the gel
14. Rinse off the mouthpiece and give it back to your patient for take home use, DO NOT REUSE on anyone else.
15. Use the lavender infused towlette to clean the face

2

System Components Control Panel

Lower Flex Upper Flex
Clamp Light Head
Tray

Pole

Base
Castor

SM;)E PERFECTED  USER GUIDE 3

Cart/Stand Assembly

Base Pole Base Assembly
Tray Caster Open stand carton by carefully cutting the tape
around the perimeter.
Locked Unlocked Remove the vertical section and top shelf and
set aside.
Using a pair of scissors, carefully remove the
wrapping from the five spoke base.
Alternately, remove the casters and slide the
wrapping off each spoke, then reinstall the
casters.
Set the base on the floor, casters down. Flip
the caster locks down to lock the casters so the
base does not move/roll.

Upright Section

Unpack the vertical pole. Carefully insert black
fitting on the bottom of the pole into the stand
Pole base. Push down with even, steady pressure

until the top of the fitting is snug against the
top of the base

Base

4

Assembly Instructions

Light Tray Top Shelf
Unpack the top shelf. Remove the eyebolt,
Tighten washer and wing nut from the pole and set
them aside. Set the top shelf on top of the pole
Tighten Pole aligning the holes in the shelf with the holes in
the pole. Insert the eyebolt through the holes
Power Tighten with the washers positioned as shown and
secure with the wing nut. DO NOT OVER
TIGHTEN! Your stand/cart is now complete.
Wrench Storage
Your stand/cart is the ideal place to keep handy
the hex wrench. Use the enclosed tie to fasten
the wrench to the eyebolt that secures the shelf
to the base.
Unpack Your Light
The light is packed in protective foam. Be sure
to keep your shipping carton and packing. It will
be needed should your light ever require
servicing.
Attaching the Light
Remove the light assembly from the packaging.
Prior to operating, your light must be attached
to the top shelf of the stand or to a suitable flat
secure surface. Open the clamp by turning the
knob counter clockwise until it clears the surface
to which it will be attached. Tighten the clamp
to the mounting surface by turning the knob
clockwise.
Power Connection
Attach the coaxial connector on the end of the
power supply cord to the connector on the
bottom of the clamp, and then connect the AC
plug to an electrical outlet.

SM;)E PERFECTED  USER GUIDE 5

System Operation/Flex Adjustment

The Sm;)e Perfected light features unique
positioning technology.
The upper and lower flex sections utilize three
different flex materials working together to
provide angular and azimuth adjustments that
allow you to position the light head is an
infinite number of positions and do so without
drooping or slipping.
Up/Down Angle
Use the lower flex section to achieve the bulk
of your desired up or down angle. Place one
hand on the clamp while gently pushing the
control housing up or down to the desired
angle. You can fine tune the up/down angle
with the upper flex section by grasping the
front of the control housing and gently
pressing the light head up or down to achieve
the desired position.
Rotation Angle
The light is specifically designed to fit the
shape of the lens/mouthpiece. For the best
fit, the rotational angle of the light head
should be parallel to the plane of the
mouthpiece. To adjust the rotational angle,
gently grasp the light head and the upper flex
section and twist the flex tube to the desired
angle.

*Some items shown are not included with
light.

6

System Operation/Control Panel

On/Off
The powers on automatically when the power is first applied. To turn off the power, press and hold the
power switch until the display goes dark. From the off position, press and hold the power switch until the
display illuminates.
White/Blue
The control illuminates the light without activating the timer for performing shade guide matching. Using
this control you may select the color of the light through a rotation of button presses. The first press
displays the white light, the second press displays the blue light and the third press is a test mode that
illuminates both blue and white LED’s. A fourth press turns the illumination off while leaving the light
powered up. Keep the light off if not in use. The light will remain on if Start/Stop is not activated.
Start/Stop
Once you have the desired treatment time (typically 20 minutes), activate the light in timed mode by
pressing the START/STOP button. The light head will activate and the timer will begin counting down in
seconds (60,59,58, etc…). When you notice the display changing rapidly, you know that you have less than
a minute before your patient requires your attention.
When the light is running in timed mode, press the START/STOP button once to pause the light. The pause
mode is indicated by the display flashing. Pressing START/STOP a second time will resume the treatment
from the point it was paused.
More Time/Less Time
To increase the time, press the arrow that points away from the numeric display. To decrease the time,
press the arrow that points towards the numeric display. Pressing the UP/DOWN arrow once will change
the time one minute per press. Holding the arrow will allow the timer to change until the arrow is
released.
Reset
To stop the light operation and return all settings to the beginning, press and hold the reset button.
Timer
The first digit is minute and the second digit is seconds

SM;)E PERFECTED  USER GUIDE 7

System Operation
White Light/Blue Light

The light emits two light spectra. There is one for teeth whitening and the other for shade guide
matching for before and after differences.
430-470nm “Cool Blue Light” for Sm;)e Perfected™ Teeth Whitening
The “Cool Blue Light” emitted by the light is the ideal spectrum for energizing and accelerating the active
ingredients in the Sm;)e Perfected Whitening Gel. When exposed to moderately high amounts of light in
the 430 to 470-nanometer spectrum, these active ingredients accelerate their release of hydroxyl
radicals, which act to break down stains on tooth enamel.
The whitening mode is selected by setting the timer to the desired treatment duration (typically 20
minutes) and pressing the start button, assuring the light is emitting blue light only.

55000K White Light for Consistent and Accurate Shade Matching
The Sm;)e Perfected™ light emitting diode is specifically engineered to produce white light, which
replicates daylight (color temperature 50000 Kelvin) so your shade guide matching is accurate and
reproducible regardless f the ambient light.
To put the light into shade matching mode, press the Blue/White button until the white light is
illuminated. To return to the whitening light mode, press the button until the blue light is illuminated.
Test Mode
Two presses from the blue light will activate the test mode. It is used to check that the light is working in
both spectra.

8

The Sm;)e Perfected™ Whitening Process

Sm;)e Perfected™ is the most advanced smile rejuvenation treatment system available. It will make your
smile fresher, brighter and whiter. It is decidedly and distinctly different from other whitening systems
because it delivers better results more rapidly and with greater safety than other less advanced
methods. The Sm;)e Perfected™ process harnesses patented technologies borne out of a million dollar
research and development program including:

1) An impregnated Sm;)e Perfected™ silicon tray designed for unprecedented penetration of
hydrogen peroxide into the tooth enamel. The silicon tray also causes the hydrogen peroxide to
release at a more uniform rate over time. This acts to eliminate the tooth sensitivity typically
associated with other power and take-home whitening systems. It also conforms to the shape
and position of your teeth even better than other products.

2) The Sm;)e Perfected™ Light: A State-of-the Art cosmetic light that accelerates the whitening
process through interaction with the silicone tray and the pre-loaded gel, which is a pH stabilized
whitening gel. The light uses advanced light-emitting diode (LED) technology, which is more
effective and vastly more efficient than older, incandescent technology. The Sm;)e Perfected
advanced light design does not require fans or other forced cooling systems or methods
associated with older technology.

3) The advanced design of the Sm;)e Perfected™ light used with the light head case to about 1200F
above normal body temperature; the temperature remains at the level through the Sm;)e
Perfected Whitening process. This is the optimal temperature to produce molecular excitation of
the whitening gel through the tray and onto the teeth. It is also cool enough so as not to cause
any discomfort or risk radiant or contact burns typically associated with older technology.

4) The Sm;)e Perfected™ process employs a narrow blue-light spectrum---just what is needed for
acceleration of the formation of hydroxyl radicals from the whitening gel (the hydroxyl radicals
are the components that permeate the tooth enamel and break down stains). This is important,
since with Sm;)e Perfected™ there is no UV light exposure or risk of over heating the teeth, as is
the case with some other whitening methods.

5) A unique light-guiding Sm;)e Perfected™ mouthpiece that disperses blue light over all tooth
surfaces via its built-in optical lens. This technology allows you to close your mouth during the
Sm;)e Perfected™ Whitening procedure and eliminates the need for uncomfortable lip and cheek
retractors. It also acts to create a teeth/tray fit that is actually superior to custom made trays, as
the tray allows for adequate gel.

SM;)E PERFECTED  USER GUIDE 9

FAQ’s

How white will my teeth/smile get?
Two layers of tooth structure determine the color of your smile. The lighter outer layer is the enamel and the
darker inner layer is the dentin. The composition of these is determined by genetics and environmental factors
as the teeth are being formed. Your teeth will never be whiter than when you were a child. For most individuals
this is very white. The patented process attacks and removes even deep stains that have accumulated in your
tooth enamel—the light outer layer of tooth structure. As a result, most individuals will experience a significant
improvement. However, no noninvasive cosmetic whitening treatment can whiten your dentin. If your tooth
enamel is unusually thin or translucent or if your dentin is especially dark, you may be able to achieve the level of
brightness you desire without dental veneers placed by a dentist.
White Spots?
White spots represent areas of the teeth where earlier changes in the mineral content have occurred. This
alteration can be caused by genetics, nutrition, poor dental hygiene, or unbalanced fluoride intake during tooth
development. White spots can become evident after orthodontic braces have been removed. The Sm;)e
Perfected™ whitening process can reveal white spots previously hidden by stains. This effect usually fades in 24-
48 hours. Continued use of the Sm;)e Perfected™ whitening pen and regular fluoride therapies, including
brushing with fluoride toothpaste, will usually help remedy the appearance of these white spots.
Dental Restorations?
Sm;)e Perfected™ works best on natural tooth structure. While Sm;)e Perfected™ whitening does remove surface
stains from dental restorations such as crowns, veneers and white fillings, it is not intended to make them
whiter! The color of these structures will remain as they were installed unless they have accumulated stains.
Sm;)e Perfected™ will still give you a brighter overall smile but a dentist should be consulted if you want to
replace the restorations to match the Sm;)e Perfected™ whitened teeth.
Teeth Sensitivity?
Sm;)e Perfected™ technology makes it possible to get excellent cosmetic results without the tooth sensitivity
typically associated with other whitening systems and procedures. However, on a very rare occasion tooth
sensitivity can occur. This is usually a mild and brief side effect generally subsiding in 24-48 hours. Treatment
with an over-the-counter analgesic such as ibuprofen or acetaminophen may provide temporary relief. Normal
gentile brushing with any multi-action toothpaste is recommended. Sensitivity lasting more than a few days may
reveal a dental condition that you should bring to the attention of your dentist.
Blanching and Irritation?
A slight blanching or whitening of the gum tissue is normal. Usually lasting 30-60 minutes, this blanching
represents a healthy healing phase induced by the antiseptic properties of the whitening gel, which reduces
bacteria levels in the mouth. Patients with gingivitis, periodontal disease (collectively know as gum disease) or
compromised gum tissue may experience some post treatment soreness. Applying a small amount of Vitamin E
oil to the affected areas will accelerate the healing. If significant discomfort is encountered during the
procedure, the patient or dental professional should remove the silicone tray and continue the treatment at
home using only the Sm;)e Perfected™ whitening pen.
Minor inflammation, chapping or irritation of the lips may also occur in very rare cases. This can be treated with
the application of lip balm, petroleum jelly or vitamin E oil. An over-the-counter anti-inflammatory such as
ibuprofen or acetaminophen may be used to provide relief in extraordinary cases where symptoms last more
than two hours; use as directed on the label of the medication.

10

Appendix

There are NO user-serviceable parts
There are no bulbs or other devices in your light, which will “burn-out”. The Sm;)e Perfected™ advanced light
emitting diode technology outlasts conventional light bulbs to an extreme degree. Should one of the diodes or
any other part of your light ever fail, contact customer service at www.smileperfected.com.
Sm;)e Perfected™ will arrange to repair or replace your light.
Normal Operating Temperature
The Sm;)e Perfected™ advanced design and LED technology of your light allows it to operate without fans or
other forced cooling methods. The extremely efficient thermal design allows the case temperature of the light
head to rise to about 1100F and remain at that temperature as long as the LED’s are illuminated. The
temperature is quite safe and will not deform or affect the clear lens/mouthpiece.

To prevent fire or shock hazard, DO NOT expose the unit to water or moisture;
DO NOT SUBMERGE

Safety Approval
CSA UL

SM;)E PERFECTED  USER GUIDE 11